2002/08/21 Guillaume Cottenceau * tools/cvslog2changelog.pl: uniformize real names 2002/08/21 Franois Pons * pkgs.pm: fixed stupid typo for bestKernelPackage. added return for bestKernelPackage ;-) 2002/08/21 Jonathan Gotti * bootlook.pm: add link to draksplash * standalone/draksplash: remove warnings 2002/08/21 Pablo Saratxaga * share/po/pt.po: updated po file 2002/08/21 Pixel * keyboard.pm: put back loadkeys_files which *is* used (by make_rescue_img) 2002/08/20 Pablo Saratxaga * share/po/hu.po: updated po file * keyboard.pm, share/keyboards.tar.bz2: merged keyboards with XFree86 2002/08/20 Pixel * keyboard.pm: fix pablo... uh no, too hard. fix his typo instead ;p * drakxtools.spec: - fix dangling waiting watch mousecursor (well, please test!) - adding draksplash (nathan) * my_gtk.pm: - in destroy, detect if program is going to leave, in that case don't do anything, especially don't set the waiting mouse cursor another thing is that calling flush() at this moment causes segfault so don't do it and no more segfault :) (now, if someone finds out what this 4 is about... but you cares, it works :) this fixes program ending on an exception - also add END() calling exit() (in case a program forgets to (heurk) call exit()) 2002/08/20 alus * share/po/pl.po: Upper Case updated translation 2002/08/20 Damien Chaumette * network/adsl.pm: o ECI adsl config fix 2002/08/20 Franois Pons * install_any.pm: make sure kernel is selected during upgrade. * pkgs.pm: fixed ldconfig not visible in packages tree. fixed ldconfig not selected for installation. added bestKernelPackage. 2002/08/20 Jonathan Gotti * standalone/draksplash: a tool for bootsplash theme creation * drakxtools.spec: adding draksplash * Makefile.config: adding draksplash in STANDALONEPMS_ 2002/08/20 Pablo Saratxaga * share/keyboards.tar.bz2, keyboard.pm: merged keyboards with XFree86 * share/po/ta.po, share/po/hu.po: updated po file updated pot file * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po, share/po/el.po: updated pot file * lang.pm: Removed fallback languages for "bs" (there are enough native translations now) 2002/08/20 Pixel * my_gtk.pm: - in destroy, detect if program is going to leave, in that case don't do anything, especially don't set the waiting mouse cursor another thing is that calling flush() at this moment causes segfault so don't do it and no more segfault :) (now, if someone finds out what this 4 is about... but you cares, it works :) this fixes program ending on an exception - also add END() calling exit() (in case a program forgets to (heurk) call exit()) * share/keymaps.tar.bz2: update to correspond to keyboard.pm * mouse.pm: fix the use of create_okcancel * keyboard.pm: fix pablo... uh no, too hard. fix his typo instead ;p - drop the loadkeys_files (it is unused) - add more precise check of the existence of .bkmap's and that share/keymaps.tar.bz2 is up to date * install_steps_interactive.pm: firewire configuration is only automatic add firewire controller configuration * standalone/drakbackup: fix $'s in i18n'ed strings * standalone/XFdrake: when restarting X, don't kill kdm/gdm/xdm, they don't need this (worse, they don't respawn) * install_steps.pm, modules.pm: add firewire controller configuration * drakxtools.spec: - fix dangling waiting watch mousecursor (well, please test!) - adding draksplash (nathan) 2002/08/20 Stew Benedict * standalone/drakbackup: remove unused subs disable forced "backup before restore" that erases previous backup more work towards tracking backed up files for future recovery 2002/08/20 Till Kamppeter * standalone/scannerdrake: - Let all occurences of "Seiko Epson" replaced by "Epson" both in the scanner names read from the ScannerDB and in the names resulting from scanner auto-detection (names from usbtable). So the user gets presented "Epson" and usbtable can have "Epson" names where ScannerDB can have "Seiko Epson" names. - If a scanner is listed as "unsupported" in ScannerDB, the user gets a message instead of scannerdrake silently exiting. Fixed parantheses of a "member" function, fixed typos. * scanner.pm: - Let all occurences of "Seiko Epson" replaced by "Epson" both in the scanner names read from the ScannerDB and in the names resulting from scanner auto-detection (names from usbtable). So the user gets presented "Epson" and usbtable can have "Epson" names where ScannerDB can have "Seiko Epson" names. - If a scanner is listed as "unsupported" in ScannerDB, the user gets a message instead of scannerdrake silently exiting. * printer.pm: Taken LPRng from spooler menu in printerdrake. 2002/08/20 Thierry Vignaud * standalone/logdrake: s/one of the selected service/one of the selected services/ (spoted by Arpad Biro) * standalone/draksound: - simplify - allocate sound slots in the same order as install2.pm (aka in modules::probe_category('multimedia/sound') order) add draksound: allow to switch between alsa and oss; should result in better sound support * harddrake/TODO: instead of generating my own list of module descriptions from list_modules.pm list of sound modules, just usemodules::category2modules_and_description * standalone/service_harddrake: - kill dead code - more use of MDK::Common - use draksound wizard - boot: only check for removed/added disks, video card, ethernet devices and mouse * ugtk.pm: kill debugging prints * help.pm: s/enter a disk/insert a disk/ (Arpad Biro) * standalone/drakbackup: typo fixed seen by Arpad Biro: s/durind/during/ s/an user/a user/ s/select select/select/ s/propogate/propagate/ * harddrake/data.pm: - use draksound wizard - boot: only check for removed/added disks, video card, ethernet devices and mouse don't put dvd burners in both dvd and burners classes but only in burners * harddrake/Makefile, harddrake/gen_snd_list, harddrake/sound.pm: instead of generating my own list of module descriptions from list_modules.pm list of sound modules, just usemodules::category2modules_and_description add draksound: allow to switch between alsa and oss; should result in better sound support * docs/Partition-ends-after-end-of-disk.txt: typo fix * bootlook.pm: s/mkinird/mkinitrd/ (Arpad Biro) 2002/08/19 alus * share/po/pl.po: one fix 2002/08/19 Pixel * Makefile.config: remove dir security * interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are more accurate than $::isWizard && !$my_gtk::pop_it and $::isEmbedded && !$my_gtk::pop_it, since when the Plug is full, the window is not embedded. * fs.pm: fix checking the return value of fsck.jfs * my_gtk.pm: in my_gtk object, set {isEmbedded} if embedded and {isWizard} if displayed wizard mode * Xconfig/monitor.pm (readMonitorsDB): now return a list instead of a hash to handle same name entries with different EISA_ID (configure_automatic): handle EISA_ID but no VertRefresh/HorizSync (happens for some hardware) (choose): handle user asking for "Plug'n Play" monitor and ddcxinfos failing * Xconfig/main.pm: replace "xxx => eval { }" with "xxx => scalar eval {}" 2002/08/19 Thierry Vignaud * modules.pm: typo fix spoted by Arpad Biro * standalone/drakbackup: s/progess/progress/ (Arpad Biro) 2002/08/19 alus * share/po/pl.po: one fix 2002/08/19 Christian Belisle * standalone/draksec: - draksec is now in his own package 2002/08/19 Damien Chaumette * network/network.pm: o remove old /etc/hosts entries for the hostname before adding new one 2002/08/19 fcrozat * share/rpmsrate: Make sure nautilus-gtkhtml is installed by default for GNOME 2002/08/19 Pablo Saratxaga * share/po/ta.po: Added Tamil file * share/po/pt.po: updated Portuguese file 2002/08/19 Pixel * Makefile.config: remove dir security * proxy.pm: add $Id: ChangeLog,v 1.725 2002/08/21 11:17:30 prigaux Exp $ * interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are more accurate than $::isWizard && !$my_gtk::pop_it and $::isEmbedded && !$my_gtk::pop_it, since when the Plug is full, the window is not embedded. * install_any.pm (getAndSaveAutoInstallFloppy): ensure mount fail doesn't cause any pb * detect_devices.pm: add scsi Optical Device recognition (thanks to Michael Riss) (without this, a hard drive following the optical device gets assigned sda whereas sda is the optical device and the hard drive really is sdb) * fs.pm: fix checking the return value of fsck.jfs * my_gtk.pm: in my_gtk object, set {isEmbedded} if embedded and {isWizard} if displayed wizard mode * Xconfig/monitor.pm (readMonitorsDB): now return a list instead of a hash to handle same name entries with different EISA_ID (configure_automatic): handle EISA_ID but no VertRefresh/HorizSync (happens for some hardware) (choose): handle user asking for "Plug'n Play" monitor and ddcxinfos failing * Xconfig/main.pm: replace "xxx => eval { }" with "xxx => scalar eval {}" 2002/08/19 Till Kamppeter * printerdrake.pm: s/drakconnet/drakconnect/ (Thank you for adding this bug, Titi) 2002/08/19 Thierry Vignaud * modules.pm: add remove_modules 2002/08/18 alus * share/po/pl.po: updated translation 2002/08/18 Pablo Saratxaga * share/po/ca.po: updated Catalan file * share/po/id.po, share/po/da.po: updated Danish and Indonesian files * share/po/cs.po, share/po/hu.po: updated Czech and Hungarian files 2002/08/18 Pixel * bootloader.pm: since lba32 is the default in lilo.conf - write "geometric" when lba32 is not set - don't write lba32 (useless) 2002/08/18 Till Kamppeter * printer.pm, printerdrake.pm: Fixed HP multi-function device configuration during the installation: - Fixed mistyped package name for "mtoolsfm" - Set links for photo card reader auto-detection to work 2002/08/17 Pablo Saratxaga * share/po/id.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated po files 2002/08/17 Pixel * Xconfig/card.pm: - allow to change the detected card - the chosen card can be used for dualhead if it is dualhead * Xconfig/resolution_and_depth.pm: sort resolutions to default to 1280x1024 instead of 1280x960 if the monitor size is not given, default to 14' * any.pm (devfssymlinkf): use "mksymlink" instead of "symlink" so that devfsd doesn't give an error when the symlink already exists * Xconfig/proprietary.pm: - fix module not returning true - don't install_matrox_hal when testing * Xconfig/main.pm: ensure the chosen resolution is maintained unchanged when changing the graphic card or monitor. 2002/08/17 Till Kamppeter * printer.pm: Fixes to make it possible toinstall HP's multi-function devices during installation. * scanner.pm: Let a newline character be put after the entry in /etc/sane.d/dll.conf, so more than one driver name can be added without all of them going into one line and then being unreadable. 2002/08/16 alus * share/po/pl.po: updated 2002/08/16 Pablo Saratxaga * share/po/sp.po, share/po/sl.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/sk.po: updated Slovak file * share/po/da.po, share/po/ko.po: updated Danish and Korean files 2002/08/16 Pixel * any.pm: fix "Security Administrator (login or email)" missing field * interactive/newt.pm: fix dialog box with empty buttons (thanks to Hamster ) * Xconfig/test.pm: raise the testing time from 8 to 12 seconds * my_gtk.pm (create_okcancel): do not display "Cancel" when {cancel} is empty string * bootloader.pm (add_entry): new entry will now keep its label, the conflicting one will be renamed "old_xxx" (and not the opposite) * diskdrake/interactive.pm: limit max size of loopback to 2GB on FAT 2002/08/16 Thierry Vignaud * harddrake/ui.pm: insert a space between "field:" and "description" * harddrake/v4l.pm, harddrake/bttv.pm, standalone/drakxtv, install_steps_interactive.pm: - harddrake::bttv is renamed harddrake::v4l - harddrake::v4l handle saa7134 too now (and not only bttv) - harddrake::v4l::config need a new driver parameter in order to be able to offer the right cards and tuners list - drakxtv: kill some old comments - add the list of cards supported by saa7134 - add a not to remember a potentiel speedup 2002/08/15 Daouda Lo * standalone/drakbug: - add --incident : could be used by signal catcher to launch drakbug when app crash * standalone/drakautoinst: - explanations 2002/08/15 Pablo Saratxaga * share/po/hr.po, share/po/da.po, share/po/DrakX.pot, share/po/fr.po, share/po/fi.po, share/po/de.po: updated Danish and Hungarian files * share/po/zh_CN.po, share/po/gl.po, share/po/ga.po: updated Chinese file * share/po/hu.po: updated Chinese and hungarian files updated Danish and Hungarian files * share/po/zh_TW.po: updated Chinese and hungarian files updated Chinese file 2002/08/15 Stew Benedict * standalone/drakbackup: Allow non-root user to use program with personal config. Finish multisession support. Fix various crash scenarios in GUI in restore mode. Fix user restore mode to restore only what is requested. View archive contents before restore, user & sys mode. Add explanation of config file options for non-X users. 2002/08/14 alus * share/po/pl.po: updated translation 2002/08/14 Pablo Saratxaga * share/po/ca.po, share/po/da.po: updated Catalan, Danish and Turkish files updated some po files * share/po/et.po, share/po/eu.po, share/po/es.po, share/po/eo.po, share/po/el.po: updated Vietnamese file * share/po/id.po, share/po/no.po, share/po/ja.po, share/po/hr.po, share/po/mt.po, share/po/ko.po, share/po/DrakX.pot, share/po/lt.po, share/po/cy.po, share/po/ar.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/it.po, share/po/nl.po, share/po/de.po, share/po/cs.po, share/po/lv.po, share/po/hu.po: updated some po files * share/po/sp.po: Updated Slovak file updated some po files * share/po/vi.po: updated Vietnamese file updated some po files * share/po/th.po, share/po/tr.po: updated Catalan, Danish and Turkish files * share/po/ru.po, share/po/pt_BR.po, share/po/ro.po, share/po/pt.po: updated po files * share/po/sk.po, share/po/br.po, share/po/sl.po, share/po/be.po, share/po/uk.po, share/po/sv.po, share/po/sr.po, share/po/bs.po, share/po/bg.po: Updated Slovak file 2002/08/14 Pixel * install_steps_gtk.pm: reduce the width of install window * bootloader.pm: fix "You can't install the bootloader on a xfs partition" happening in weird cases (thanks to Alan Hughes) * standalone/diskdrake: disable embedding of WebDAV configuration since it is broken $all_hds->{hds} must be filled in any case, not only in --hd 2002/08/14 Stew Benedict * standalone/drakbackup: undo advanced_what_user I broke perl_checking multisession CD support 2002/08/14 Warly * share/compssUsers.server: add LSB group 2002/08/13 alus * share/po/pl.po: 2 strings overlapped each other 2002/08/13 Pixel * network/dav.pm: nothing useful for the moment use ensure_is_installed * interactive/gtk.pm: handle the setting of 'ok' and 'cancel' * diskdrake/dav.pm: add checking davfs is installed rough WebDAV gui * standalone.pm: add ensure_is_installed (which was network::smbnfs::check_raw and is often useful) * standalone/diskdrake, diskdrake/interactive.pm: rough WebDAV gui * network/smbnfs.pm, network/smb.pm, network/nfs.pm: use ensure_is_installed 2002/08/13 siegel * share/po/de.po: updates 2002/08/13 alus * share/po/pl.po: 2 strings overlapped each other updated translation 2002/08/13 Franois Pons * pkgs.pm: fixed stupid typo. allow selecting a choice package according to locales-xx found. * crypto.pm: added a true value. * share/rpmsrate: removed duplicate aspell-xx as DrakX will take care of them now. 2002/08/13 Pablo Saratxaga * share/gen_locales.sh: corrected erros that made the script fail * share/po/eu.po, share/po/es.po, share/po/DrakX.pot, share/po/ru.po, share/po/ro.po, share/po/pl.po, share/po/gl.po, share/po/fi.po, share/po/pt_BR.po, share/po/et.po, share/po/zh_TW.po, share/po/eo.po, share/po/pt.po, share/po/el.po, share/po/fr.po, share/po/ga.po: updated Portuguese and Chinese files * share/po/zh_CN.po: updated Chinese file updated Portuguese and Chinese files 2002/08/13 Pixel * drakxtools.spec: require latest perl-MDK-Common * interactive.pm: remove completly setting 'ok' & 'cancel' since it's better done per interactive::* to handle correctly the Wizard mode button "Previous" and "Next" are not only there in interactive::gtk * standalone.pm: add ensure_is_installed (which was network::smbnfs::check_raw and is often useful) * fsedit.pm, fs.pm: backend davfs (WebDAV) support * interactive/gtk.pm: handle the setting of 'ok' and 'cancel' * interactive/http.pm, interactive/stdio.pm, interactive/newt.pm: - handle setting 'ok' && 'cancel' - handle isWizard in newt (basic handling) * diskdrake/dav.pm: add checking davfs is installed rough WebDAV gui * Xconfig/main.pm (export_to_install_X): if monitor is p'n'p, don't save it for auto_install * network/dav.pm: nothing useful for the moment use ensure_is_installed backend davfs (WebDAV) support * standalone/diskdrake: rough WebDAV gui * network/smbnfs.pm, network/smb.pm, network/nfs.pm: use ensure_is_installed * diskdrake/interactive.pm: rough WebDAV gui backend davfs (WebDAV) support 2002/08/13 siegel * share/po/de.po: updates 2002/08/13 Thierry Vignaud * drakxtools.spec: harddrake-ui doesn't have to provides kudzu * standalone/drakxtv: add "Australian Optus cable TV" support (need xawtv <= 3.76) * standalone/service_harddrake: check the config file isn't empty 2002/08/12 alus * share/po/pl.po: spell checking updated translation 2002/08/12 Franois Pons * install_steps.pm: allow removing packages on upgrade. * pkgs.pm: fixed stupid change (almost hope it was really changes). fix to reduce size of already installed packages. * install_steps_interactive.pm: synced to force calling selectPackagesAlreadyInstalled in order to have installed and upgrade computed (necessary to known if a package is already installed or will be upgradable to compute size more precisely). 2002/08/12 Pablo Saratxaga * share/po/wa.po, share/po/et.po, share/po/zh_TW.po, share/po/vi.po, share/po/eu.po, share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/el.po: updated po files * share/po/zh_CN.po: updated Chinese file updated po files * share/gen_locales.sh, share/locales-skeleton.tar.bz2, share/Makefile: locale name <-> charset correspondances better matching what DrakX uses * share/po/bs.po, share/po/br.po, share/po/be.po, share/po/cy.po, share/po/ca.po, share/po/cs.po, share/po/bg.po: updated Chinese file 2002/08/12 Pixel * standalone.pm: - add setExportedVarsInSh and setExportedVarsInCsh - remove setVarsInCsh (obsoleted by setExportedVarsInCsh) * bootloader.pm: fix typo * interactive.pm: don't switch to 2 buttons dialog box if the labels are too long in ask_from_list (otherwise it's ugly (reported for XFdrake multi-head choice with 67 & 58 chars strings) (fix bug #62) * Xconfig/xfreeX.pm: create a backup of XF86Config (XF86Config.old) * any.pm: use setExportedVarsInSh for setting /etc/profile.d/proxy.sh so that http_proxy and ftp_proxy are exported (thanks to Pascal ) * keyboard.pm, network/network.pm, install_steps.pm: - fix reading previous keyboard config on upgrade (for displaying in summary) - ensure keyboard and mouse configuration are not overwritten if not explictly modified on upgrade - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq" is needed on some box, see http://islay.dyndns.org/taz/index.html for more) * proxy.pm: allow ftp_proxy beginning with http: (thanks to Christophe Combelles) * install2.pm: - fix reading previous keyboard config on upgrade (for displaying in summary) - ensure keyboard and mouse configuration are not overwritten if not explictly modified on upgrade - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq" is needed on some box, see http://islay.dyndns.org/taz/index.html for more) use $::prefix * mouse.pm, Xconfig/default.pm: use $::prefix * bootlook.pm: fix embedding 2002/08/12 Thierry Vignaud * ugtk.pm: consolidate create_factory_menu - ugtk::gtkexpand : new function - harddrake::ui : uses it write_on_pixmap: kill unused variable tree_set_icon: new function create_okcancel isn't in ugtk so don't export it (warning fix) * harddrake/ui.pm: print fields values in blue, paint unknown module in red consolidate create_factory_menu - on exit, kill the running configurator if any - modules::get_parameters : consolidate some code - harddrake::ui : uses it - ugtk::gtkexpand : new function - harddrake::ui : uses it - perl_checker fix - simplifications - put signals ids in %IDs - consolidate duplicated disconnection code into disconnect tree_set_icon: new function * modules.pm: - modules::get_parameters : consolidate some code - harddrake::ui : uses it * scanner.pm: update TODO list * harddrake/TODO: - on exit, kill the running configurator if any 2002/08/12 Warly * share/compssUsers: update LSB text * share/logo-mandrake.png: logo for beta 3 * share/rpmsrate: remove useless 2 GNOME 2002/08/11 alus * share/po/pl.po: updated 2002/08/11 Pixel * partition_table/raw.pm: add Acronis bootloader magic * share/rpmsrate: adding aspell-LANGS before evolution to workaround the choices limitation (=> allow to choose the right aspell-LANG) * docs/comparisons: comprehensive feature-to-feature comparison with redhat 8.0 * diskdrake/interactive.pm: allow to enter any mount point even in non-expert (why was it still the other way??) * drakxtools.spec: add "PreReq: rpm-helper" in drakxtools-http as advised by rpmlint * bootloader.pm: - compare_entries is now called same_entries - same_entries try hard to return true even if the files not the same but symlinks to the same file - rework add_entry (it handles weird case which used to give old_linux and old2_linux even if they are the same) - ensure the old failsafe entry doesn't give any old_failsafe 2002/08/11 alus * share/po/pl.po: updated 2002/08/11 Pablo Saratxaga * share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/sk.po, share/po/sp.po, share/po/af.po, share/po/sl.po, share/po/az.po, share/po/hr.po, share/po/ar.po, share/po/hu.po: updated some po files * share/po/th.po, share/po/tr.po: updated Turkish file 2002/08/11 Pixel * lvm.pm: - vg_add: do not vgremove the old_name anymore, this is dangerous and should not happen - lv_create: fix bug when {primary}{normal} didn't exist - use run_program::get_stdout instead of `` - create and use run() and run_or_die() which takes care of running vgscan again when needed - rename LVMname to VG_name * diskdrake/interactive.pm: allow to enter any mount point even in non-expert (why was it still the other way??) rename LVMname to VG_name * detect_devices.pm (floppies): module "floppy" can fail to insmod, in that case it means there's no floppy controller, so don't try fd0 & fd1 which may cause havoc (esp. segfault) (thanks to rcc) * share/rpmsrate: adding aspell-LANGS before evolution to workaround the choices limitation (=> allow to choose the right aspell-LANG) * docs/comparisons: comprehensive feature-to-feature comparison with redhat 8.0 * diskdrake/hd_gtk.pm, partition_table.pm: rename LVMname to VG_name * fsedit.pm: get rid of the duplicated /tmp in for suggestions_mntpoint() (thanks to Amaury) - rename LVMname to VG_name - part2hd: allow rootDevice to be a VG_name - add auto_allocate_vgs cleanup * fs.pm (prepare_write_fstab): no need to read the fstab once again before writing since reading takes care of everything, including unknown entries (which go to {special}). This fixes a bug when removing existing partition with associated mount point. It used to keep the entry in fstab, which is wrong (as reported by andr ) * modules.pm (load): when isStandalone, ignore errors when loading unavailable modules (ie have the same behaviour as during install) * run_program.pm: add get_stdout (similar to rooted_get_stdout) * bootloader.pm: - compare_entries is now called same_entries - same_entries try hard to return true even if the files not the same but symlinks to the same file - rework add_entry (it handles weird case which used to give old_linux and old2_linux even if they are the same) - ensure the old failsafe entry doesn't give any old_failsafe * network/smb.pm: fix yet another bug regarding credentials during install * install_steps_auto_install.pm: nice message when rebootNeeded in auto_install (otherwise it reboots without prompting) 2002/08/11 Till Kamppeter * printer.pm, printerdrake.pm: Setup of HP MF devices on parallel port did not work. Fixed. Allow setup of MF device if device file name "/dev/printer/" was entered. If auto-detection of model name fails, ask user always whether he has an MF device. If SNMP or local auto-detection fails but HPOJ auto-detection succeeds, use model name found by HPOJ. 2002/08/10 Pablo Saratxaga * share/po/vi.po, share/po/sv.po: updated po file 2002/08/10 Pixel * diskdrake/interactive.pm: - fix computing the minimal size for reiserfs resizing - use run_program::run instead of system for calling resizing tools * install_any.pm: workaround perl bug another way 2002/08/10 Stew Benedict * standalone/drakbackup: GUI fixes, scp, rsync, webDAV, CD, tape support. Consolidate all net methods into one configure screen. Daemon mode, email fixed. Ran perl_checker and corrected. GUI feedback during various backup modes and result report. CD/Tape drive/media detection. Start to look at cataloging runs for locating restore media. 2002/08/10 Till Kamppeter * printerdrake.pm: Removed HP multi-function device configuration from SMB and remote LPD printer setup. Let the Sony IJP-V100 being treated as an HP multi-function device. Taken into account that the HP PhotoSmart 7150 has no photo card reader. Use any::get_secure_level() instead of printer::get_security_level(). * detect_devices.pm: Scanning network for printers did not work during installation. Fixed. * printer.pm: Use any::get_secure_level() instead of printer::get_security_level(). 2002/08/09 fcrozat * share/rpmsrate: No longer requires metacity-setup (everything can be done using gnome-control-center) Ensure we install enough GNOME packages when selection GNOME 2002/08/09 Franois Pons * install_steps.pm: make sure size of packages is computed. * pkgs.pm: take care of packages already installed that will be removed (untested). * install_any.pm: fixed loadO when getFile is not used (local files). * interactive.pm: allow cancel button even for wizard. * install_steps_interactive.pm: small update to avoid side effect of bless to HASH even if nothing results from this. 2002/08/09 Pablo Saratxaga * share/po/cs.po: updated Czech file * share/po/pt.po: updated Portuguese file * share/po/id.po, share/po/fr.po: updated French and Indonesian files 2002/08/09 Pixel * share/keyboards.tar.bz2: fix rights on files * tools/make_mdkinst_stage2, share/list.i386, install_any.pm: add fsck.jfs * any.pm, modparm.pm, harddrake/ui.pm: - fix module parameter dialog box handling - enable the cancel on load_module__ask_options * bootloader.pm (mkinitrd): when an initrd is already there, it means an initrd is needed not the contrary (thanks to Damon Lynch for his test) * install_steps.pm: remove previous report.bug.gz (otherwise one get a report.bug *and* the previous report.bug.gz) (report.bug's are not rotated, ddebug.log's and install.log's are) 2002/08/09 Thierry Vignaud * modparm.pm: no need anymore to pass extra arguments for harddrake::ui * Xconfig/various.pm: perl_checker fixes * harddrake/TODO: module parameters're now read from /etc/modules.conf before being altered * harddrake/bttv.pm: resync with bttv-0.7.95, add support for : - tv cards: o Hauppauge WinTV PVR o Leadtek|WinFast VC 100 - tv tuners: o LG NTSC (newer TAPC series) * drakxtools.spec: harddrake changes * modules.pm: mergein_conf: return options if they're set * harddrake/ui.pm: - module configuration window: o read current options o don't display ranges, we cannot really know when a range is needed and so display them in wrong cases (kill code, enable us to simplify modparm::parameters after o read & parse modules.conf only when configuring the module, not on each click in the tree o move up "require module" since we use it above o use get_options accessor instead of direct $conf access o split the options string into a hash{option => value} o don't call several times interactive->vnew o fix busy cursor on window exit because of the previous change 2002/08/08 alus * share/po/pl.po: various changes 2002/08/08 Pixel * services.pm (services): better sorting of services 2002/08/08 alus * share/po/pl.po: various changes corrected errors 2002/08/08 Franois Pons * fs.pm: make sure fsck is called for ext3 partition (due to possible kernel panic on corrupted ext3 partition, even after mounting ext3, umounting and remounting ext2). 2002/08/08 Pablo Saratxaga * share/keyboards.tar.bz2, keyboard.pm: Added Tamils TSCII keyboard * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po, share/po/el.po, share/po/hu.po: updated pot file * lang.pm: Added Tamils TSCII keyboard Added some support for Tamil (proper KDE default fonts, and define it as iso8859-1 encoding for kde) * share/po/es.po: updated pot file updated Spanish file 2002/08/08 Pixel * install_steps_gtk.pm: - remove the icons in reallyChooseGroups - add the LSB group - remove buttons to change theme - add F5 to change the theme to the 'white' theme - cleanup the theme code workaround a weird pb with gtk: still re-creating help Gtk::Text at each step :-/ - remove the "help" button - ensure the help box is not created twice (except when changing theme) * Xconfig/xfreeX.pm (set_resolution): handle the optional $resolution->{Y} (@resolutions): add 1280x960 fix typo replace 1152x768 with 1152x864 as it should and used to be * install_steps.pm: don't add users in group usb (unneeded (?), anyway doesn't do anything since group usb doesn't exist currently) * install2.pm: - remove buttons to change theme - add F5 to change the theme to the 'white' theme - cleanup the theme code * services.pm (services): better sorting of services * install_any.pm, timezone.pm: use $::prefix in timezone::read timezone::read now returns a hash * install_gtk.pm: - remove buttons to change theme - add F5 to change the theme to the 'white' theme - cleanup the theme code workaround a weird pb with gtk: still re-creating help Gtk::Text at each step :-/ - remove the "help" button - ensure the help box is not created twice (except when changing theme) * Xconfig/various.pm (tvout): rough default value for PAL vs NTSC (configure_FB_TVOUT): add ModeLines (Florent Beranger says it displays better with them) * any.pm: - write_passwd_user: ensure {pw} is set (at least '') - cleanup dead code (ask_window_manager_to_logout): adapt to new gnome sort security level descriptions * my_gtk.pm: do not hard code icon path - remove buttons to change theme - add F5 to change the theme to the 'white' theme - cleanup the theme code * Xconfig/card.pm, Xconfig/monitor.pm, Xconfig/main.pm: when prompting for VideoRam, default to the value obtained via DDC * Xconfig/resolution_and_depth.pm: handle the pb of resolutions where X doesn't imply Y (eg: 1280x1024 and 1280x960) * standalone/adduserdrake: - fix detecting use of MD5 and shadow passwords - cosmetic move of any::addUsers 2002/08/08 Stew Benedict * install_any.pm, install_steps_interactive.pm: Windows PDC -> Windows Domain, don't make samba dirs - samba fixed now 2002/08/08 Thierry Vignaud * scanner.pm: old hp scanners report themselves as "Processor"s as : - tested in hw lab - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners use this" - reported by sane-find-sane: "old HP scanners use the CPU id" * detect_devices.pm: explain the fscking "Processor" need old hp scanners report themselves as "Processor"s as : - tested in hw lab - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners use this" - reported by sane-find-sane: "old HP scanners use the CPU id" 2002/08/07 Christian Belisle * security/shorewall.pm: shorewall-related functions will go here. 2002/08/07 Franois Pons * install_steps.pm: added automatic update of lilo image and KDE & GNOME background. * install2.pm: allow automatic oem patch. add log if successfull patching. * install_steps_interactive.pm: do not ask user to select ignored medium. * crypto.pm: allow patching of mirror used. * pkgs.pm: call rpmReadConfigFiles before installing packages. do not read package of ignored medium (contrib) to save memory. * install_any.pm: getAndSaveFile now return before writing zero-length file if input file doesn't exists on invocation. 2002/08/07 Pablo Saratxaga * share/po/vi.po: updated Vietnamese file 2002/08/07 Pixel * Xconfig/card.pm: load glx in any case (well except for nvidia proprietary shit) * fs.pm: "LABEL=xxx" in fstab handling * bootlook.pm: replace glob() with all() * network/netconnect.pm (get_profiles): get rid of "glob", clean it up 2002/08/06 alus * share/po/pl.po: updated translation 2002/08/06 Daouda Lo * network/tools.pm: - set the vpi vci correctly according to selected country. 2002/08/06 Franois Pons * pkgs.pm: added log to follow dead lock to check what may cause it). 2002/08/06 Guillaume Cottenceau * tools/cvslog2changelog.pl: add warly,jgotti 2002/08/06 Jonathan Gotti * bootlook.pm: add standalone::explanations for bootsplash configuration 2002/08/06 Pablo Saratxaga * share/rpmsrate: Increased the level of "yudit"; it's one of the editors with best utf-8 support, so very useful to have. * share/po/fr.po, share/po/wa.po: updated French and Walloon files Put _() around two strings in security level choosing * share/po/DrakX.pot: updated French and Walloon files * any.pm, share/po/pl.po: Put _() around two strings in security level choosing 2002/08/06 Pixel * Xconfig/xfree3.pm, Xconfig/xfreeX.pm, Xconfig/xfree4.pm, Xconfig/parse.pm: make wacom config work * bootloader.pm (get_kernels_and_labels): only take kernels for which we have the corresponding /lib/modules/VERSION (otherwise mkinitrd will fail) * run_program.pm (raw): new function allowing special options like {timeout} * fsedit.pm: - add /tmp in %suggestions for server partitioning - tweak some ratio's in %suggestions * any.pm (ddcxinfos): use the new run_program::raw with a 20s timeout to workaround ddcxinfos going wild using 100% system CPU * detect_devices.pm, my_gtk.pm, install_any.pm: make perl_checker happy * standalone.pm: add "use run_program" as needed 2002/08/06 Stew Benedict * standalone/drakTermServ: typo, change /etc/exports explanation in help 2002/08/06 Thierry Vignaud * harddrake/data.pm: make perl_checker happier :-) - dont detect undef devices detect modem too - rename scanner::findScannerUsbport as scanner::detect as in mouse.pm - scanner::detect : detect SCSI scanners too * drakxtools.spec: log changes * network/modem.pm: nobody pass the second argument of network::modem::modem_detect_backend() so let simplify it * standalone/scannerdrake: - rename scanner::findScannerUsbport as scanner::detect as in mouse.pm - scanner::detect : detect SCSI scanners too * ugtk.pm: remove old references to rectangle drawing around mcc icons * scanner.pm: make perl_checker happier :-) - dont detect undef devices - rename scanner::findScannerUsbport as scanner::detect as in mouse.pm - scanner::detect : detect SCSI scanners too 2002/08/05 Pixel * share/list: switch to thread-multi * any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it * drakxtools.spec: rebuild for perl thread-multi * rescue/list.sparc, rescue/list.x86_64, rescue/list.i386, rescue/list.ia64, rescue/list, rescue/list.alpha, rescue/list.ppc: - adapt to thread-multi - packdrake.pm is now out of arch dir 2002/08/05 Stew Benedict * install_any.pm: smbpasswd call deferred with addToBeDone 2002/08/05 alus * share/po/pl.po: removed unused strings updated translation, ugh... after second beta so much changes?? 2002/08/05 Daouda Lo * standalone/logdrake: - do not show empty wizard when save button clicked. - cleanup (remove all sms stuffs: code and labels) - do not expand mail address 2002/08/05 gbeauchesne * Makefile: lib64 fixes - Move xf86Wacom.so modules to {i386,ppc}-specific filelist - Make filelists lib64 aware with LIB variable - Add x86_64-specific filelist * share/list.i386, Makefile.config, share/list, share/list.x86_64, share/list.ppc: - Move xf86Wacom.so modules to {i386,ppc}-specific filelist - Make filelists lib64 aware with LIB variable - Add x86_64-specific filelist 2002/08/05 Guillaume Cottenceau * drakxtools.spec: 1.1.9-5mdk 1.1.9-4mdk * my_gtk.pm: the state can be XXX also in flat mode, for disabling the setting of the state 2002/08/05 Pablo Saratxaga * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/cy.po, share/po/ca.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po: updated pot file * share/po/sv.po, share/po/da.po, share/po/hu.po: updated pot file updated po files * share/po/tr.po, share/po/pt.po: updated po files updated pot file 2002/08/05 Pixel * tools/Makefile: packdrake.pm is now in vendorlib * commands.pm: make perl_checker happy * bootlook.pm, standalone/printerdrake, standalone/draksec, standalone/drakfloppy, standalone/drakxservices, standalone/drakfont, standalone/drakautoinst, my_gtk.pm, standalone/drakconnect, standalone/drakgw, standalone/XFdrake, standalone/tinyfirewall, standalone/keyboarddrake, standalone/drakTermServ, standalone/mousedrake, standalone/scannerdrake: replace "kill USR1" with "kill 'USR1'" (and same for USR2) (so that 'use strict' works) * drakxtools.spec: rebuild for perl thread-multi * diskdrake/smbnfs_gtk.pm: adapt to ugtk * standalone.pm (install): verify at least one package is not installed before displaying a wait_message and calling urpmi (thanks to Jure Repinc) (is_installed): use run_program and redirect stdout to dave null for cleanness * Xconfig/card.pm: fix Option's (especially for XFree3) don't have Utah GLX the default. XFree4 is the default * share/list: switch to thread-multi packdrake.pm is now in vendorlib * Xconfig/main.pm: call the "Quit" button exit during install (as suggested by David Sansome) * any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it * install_steps_interactive.pm: as suggested by Buchan Milne, defaults LDAP Server to ldap.DOMAINNAME * Xconfig/xfree4.pm: still have HorizSync and VertRefresh for Plug'n Play monitors (XFree4 still need some help) * standalone/drakboot: replace "kill USR1" with "kill 'USR1'" (and same for USR2) (so that 'use strict' works) a few more fixes (thanks Jure Repinc & Richard Burt) 2002/08/05 Stew Benedict * install_any.pm: smbpasswd call deferred with addToBeDone 2002/08/05 Till Kamppeter * printerdrake.pm: Make/Model/Driver list in expert mode: Fixed bug of "recommended" driver entries getting a duplicate entry without "recommended" when entering the list via double-click on existing queue / "Printer manufacturer, model, driver". Finished auto-detection of network and SMB printers. Added automatic configuration of HP's multi-function devices when connected via HP JetDirect (network). * printer.pm: Finished auto-detection of network and SMB printers. Added automatic configuration of HP's multi-function devices when connected via HP JetDirect (network). 2002/08/05 Thierry Vignaud * modules.pm: - export %modules::conf - kill modparm::raw_parameters and modparm::parameter_type which get merged back in modparm::parameters - add more parameters to modparm::parameters for harddrake harddrake/ui.pm | 19 ++++++++++--------- modparm.pm | 33 +++++++++------------------------ 2 files changed, 19 insertions(+), 33 deletions(-) * install_steps_gtk.pm, network/network.pm, log.pm, install_steps.pm, interactive.pm, bootloader.pm, harddrake/data.pm, steps.pm, install_steps_interactive.pm, keyboard.pm, printer.pm, lang.pm, fsedit.pm, install2.pm, detect_devices.pm, common.pm, commands.pm: s/__END__/1; kill "wonderful perl" * harddrake/ui.pm: - export %modules::conf - kill modparm::raw_parameters and modparm::parameter_type which get merged back in modparm::parameters - add more parameters to modparm::parameters for harddrake harddrake/ui.pm | 19 ++++++++++--------- modparm.pm | 33 +++++++++------------------------ 2 files changed, 19 insertions(+), 33 deletions(-) no one use second paramater of raw_parameters factorize some code in modparm::parameter_type s/__END__/1; * modparm.pm: - export %modules::conf - kill modparm::raw_parameters and modparm::parameter_type which get merged back in modparm::parameters - add more parameters to modparm::parameters for harddrake harddrake/ui.pm | 19 ++++++++++--------- modparm.pm | 33 +++++++++------------------------ 2 files changed, 19 insertions(+), 33 deletions(-) no one use second paramater of raw_parameters factorize some code in modparm::parameter_type * standalone/service_harddrake.sh: english fixes * standalone/logdrake, scanner.pm, standalone/drakautoinst, standalone/drakgw, standalone/scannerdrake: kill $Log (487 useless lines supressed from drakxtools) 2002/08/04 Stew Benedict * install_any.pm, install_steps_interactive.pm: partial rework of Windows PDC authentication, still need to run smbpasswd after network is up 2002/08/04 Till Kamppeter * detect_devices.pm, printerdrake.pm: Accelerated network scanning for printers by applying "nmap" only to machines which answered to a broadcast ping before. Completed network/SMB printer auto-detection for recommended mode. Started network/SMB printer auto-detection for expert mode. 2002/08/02 Daouda Lo * standalone/logdrake: - expand $email in cron script - disable sms alerts (free sms site too complicated to handle). Postponed - mail service should work now - clean up code - give the correct right to cron file to work correctly - fix titi mess * standalone/drakbug: - avoiding looping indefinitalely when selecting items in combo - add commandline arguments: drakbug --report name_app 2002/08/02 Guillaume Cottenceau * interactive/gtk.pm, my_gtk.pm: move interactive::gtk::exit to my_gtk::exit so that my_gtk apps can call it (and fix busy mouse cursor problem that way) 2002/08/02 jgotti * standalone/drakboot: minor bugfix in calling bootloader::read 2002/08/02 Pixel * drakxtools.spec: keyboarddrake now handles choosing toggle key (XkbOptions) 2002/08/02 Till Kamppeter * printer.pm: Corrected strings for printer queue list in main window. 2002/08/02 warly * share/rpmsrate, share/compssUsers: add lsb group 2002/08/01 Pixel * install_steps_interactive.pm: drop keyboard unsafe when not unsafe anymore - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE * Xconfig/various.pm: finish tvout configuration * any.pm, Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm, install_steps.pm, Xconfig/parse.pm, Xconfig/default.pm, commands.pm, printerdrake.pm: - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE * bootloader.pm (duplicate_kernel_entry): added * keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE 2002/08/01 Till Kamppeter * printerdrake.pm: Added stuff for scanning network for SMB printer shares. * detect_devices.pm: Added facility to scan network for SMB/Windows-hosted printers. 2002/08/01 Thierry Vignaud * Makefile.config, drakxtools.spec: drakconf is dead * harddrake/ui.pm, harddrake/TODO: update 2002/08/01 warly * share/logo-mandrake.png: new logo for beta 2 2002/08/01 alus * share/po/pl.po: updated translation 2002/08/01 dam's * ugtk.pm: removed fonctions typage 2002/08/01 Damien Chaumette * network/netconnect.pm, network/adsl.pm: - First ECI adsl support step 2002/08/01 gbeauchesne * rescue/make_rescue_img: While stripping libraries, note that we may need to have both /lib and /lib64 on biarch systems. - MDK::Common'ize for arch() support - Don't grab /lib/i686/ libraries - Update list to use LIB which expands to either lib64 or lib * rescue/list.x86_64: Add x86_64-specific filelist * docs/HACKING: Add /bin/mknod to command list of sudoers * mdk-stage1/disk.c: Add missing includes, for bzero() * rescue/list: - MDK::Common'ize for arch() support - Don't grab /lib/i686/ libraries - Update list to use LIB which expands to either lib64 or lib 2002/08/01 Guillaume Cottenceau * share/base.png, share/selected.png, share/rpm-semiselected.png, share/rpm-installed.png, share/rpm-unselected.png, share/installed.png, share/rpm-base.png, share/semiselected.png, share/unselected.png, share/rpm-selected.png: change some png files names according to simplification of gtkcreate_png call of new my_gtk.pm * drakxtools.spec, ugtk.pm, my_gtk.pm: commit according to 1.1.9-1mdk of drakxtools, and especially: - integrate patches in my_gtk and ugtk for new rpmdrake: - [ugtk] add "gtkentry" so that we can create an entry and set initial value in one call - [my_gtk::main] don't set the events, to fix keyboard focus problem in entries when embedded - [my_gtk::_create_window] add $::noBorder, to not have a frame in the main window, so that it's possible to end up with windows with no border - [my_gtk] add ask_dir which is a ask_file with only the dir list - [my_gtk] add ask_browse_tree_info to the export tags, and: - add support for parents with no leaves, so that then we can partially build the trees (for speedup) - add "delete_all" and "delete_category" callbacks - use Gtk::CList::clear when removing all the nodes, much speedup 2002/08/01 jgotti * bootlook.pm: - add splash theme section * pixmaps/nosplash_thumb.png: add pixmap for drakboot 2002/08/01 Pablo Saratxaga * share/po/hu.po: updated Hungarian file * share/po/vi.po: updated vietnamese file 2002/08/01 Pixel * install_steps_interactive.pm: drop keyboard unsafe when not unsafe anymore - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE * any.pm: - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE get rid of some $prefix parameter passing (using $::prefix where needed instead) * Xconfig/various.pm: finish tvout configuration * ugtk.pm, my_gtk.pm: move back Gtk->init to "new" and "gtkroot" make perl_checker happy * Xconfig/parse.pm: - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE BusID needs a string (thanks to Florent BERANGER) * standalone.pm: don't display a wait_message in newt, but do suspend * install_any.pm: get rid of some $prefix parameter passing * pkgs.pm, fsedit.pm: get rid of some $prefix parameter passing (using $::prefix where needed instead) * loopback.pm (prepare_boot): use $::prefix * interactive/gtk.pm: fix the many warnings when {icon} is not given * Xconfig/resolution_and_depth.pm: in newt, have the resolutions sorted by resolution size (wilplizgg) * install_steps.pm: - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE get rid of some $prefix parameter passing get rid of some $prefix parameter passing (using $::prefix where needed instead) bootloader::suggest uses a hash for its options * .perl_checker: tune perl_checker * Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm, Xconfig/default.pm, commands.pm, printerdrake.pm: - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE * keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD} - KBCHARSET is $o->{keyboard}{KBCHARSET} - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in sysconfig/keyboard) - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE" - add dialog box to choose GRP_TOGGLE * bootloader.pm (duplicate_kernel_entry): added get rid of some $prefix parameter passing (using $::prefix where needed instead) bootloader::suggest uses a hash for its options 2002/08/01 Till Kamppeter * share/rpmsrate: Added new packages needed by printerdrake. * printerdrake.pm: Let packages "nmap" and "scli" get installed by printerdrake. Printer model auto-detection for ethernet-connected printers when setting up TCP/Socket, remote LPD, IPP, or HTTP printers. Continued work on scanning the local network for printers. In "setup_local()": Renamed variable "@parport" to "@autodetected". Do not let list of auto-detected printers get sorted alphabetically, it should stay sorted by ports. Fixed typo in file name in "check_network()". 2002/08/01 Thierry Vignaud * diskdrake/smbnfs_gtk.pm: perl_checker fix * drakxtools.spec: drakconf is dead 17mdk: stage 1 my_gtk: - splitup it into my_gtk and ugtk as done by dams - resync with dams - increase the icon blinkage from 50ms to 100ms %postun -n harddrake: return 0 when nothing has to be done * ugtk.pm: we already require perl-GTK-GdkImLib so temporary disable Gtk::Gdk::Pixbuf support, thus removing all gdk/gtk warnings remove INFO warnings my_gtk: - splitup it into my_gtk and ugtk as done by dams - resync with dams - increase the icon blinkage from 50ms to 100ms * my_gtk.pm: my_gtk: - splitup it into my_gtk and ugtk as done by dams - resync with dams - increase the icon blinkage from 50ms to 100ms * tinyfirewall.pm: kill stupide style perl_checker fixes * standalone/harddrake2: export license move embedded and standalone managment from harddrake::ui to standalone/harddrake2 * harddrake/TODO: update move embedded and standalone managment from harddrake::ui to standalone/harddrake2 * harddrake/ui.pm: update add_icon_path is exported in :various perl_checker fixes perl_checker fixes - workaround for the busy mouse cursor set by gtkset_mousecursor_wait() in my_gtk::destroy - remove debugging prints - don't handle "$::isEmbedded ? kill('USR1', $::CCPID) : Gtk->exit(0);", it's done by interactive->exit() export license move embedded and standalone managment from harddrake::ui to standalone/harddrake2 * standalone/logdrake, harddrake/bttv.pm, standalone/drakconnect, standalone/drakbug, standalone/tinyfirewall, standalone/scannerdrake, standalone/drakxtv: perl_checker fixes * standalone/drakxconf: remove obsolote file * Makefile.config: drakconf is dead * tools/cvslog2changelog.pl: use new dam's email * scanner.pm, harddrake/data.pm: perl_checker fixes perl_checker fixes 2002/07/31 Pixel * Xconfig/card.pm, Xconfig/main.pm: - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) * bootlook.pm, network/network.pm, resize_fat/main.pm, network/netconnect.pm, Xconfig/xfreeX.pm, diskdrake/interactive.pm, network/ethernet.pm, printer.pm, detect_devices.pm, resize_fat/info_sector.pm, install_any.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") * any.pm (devfssymlinkf): when creating a symlink on the system, use devfs name if devfs is mounted * standalone/logdrake, standalone/draksec, standalone/drakxservices, standalone/drakautoinst, standalone/drakproxy, standalone/tinyfirewall, standalone/keyboarddrake, standalone/drakboot, standalone.pm, standalone/drakTermServ, standalone/net_monitor, standalone/diskdrake, standalone/mousedrake, standalone/drakbackup, standalone/printerdrake, standalone/drakfloppy, standalone/drakfont, standalone/drakconnect, standalone/drakgw, standalone/scannerdrake, standalone/drakxtv: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ * standalone/XFdrake: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) * Xconfig/various.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) 2002/07/31 Christian Belisle * security/msec.pm: - Fix page change between checks -> advanced - Factorize options-related functions - s/choose_options/choose_functions - Added security checks page - put the basic button on top (in the advanced page) - move set_server_link in the ignore list temporary * security/main.pm: - Factorize options-related functions - s/choose_options/choose_functions - Added security checks page - factorize functions (many functions -> one function) 2002/07/31 Daouda Lo * share/rpmsrate: - s/GNOME/X/ for gnome-linuxconf * standalone/drakbug: - many changes - command line support (--report name_of_program), to be used in tools - ergonomy fixes (use table to align widget correctly) 2002/07/31 Damien Chaumette * run_program.pm: - fix $ENV{HOME} value to '/root' if usermode break it 2002/07/31 gbeauchesne * c/Makefile.PL: lib64 fixes 2002/07/31 Guillaume Cottenceau * mdk-stage1/cdrom.c: hopefully fix "device or resource busy" problem in cdrom automatic mode (I messed up between truth value and number in a list... the first value is numbered "0" whicih is "false"...) 2002/07/31 Pablo Saratxaga * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/help-it.pot, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/vi.po, share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/help-fr.pot, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: updated pot file * share/po/pt.po, share/po/eu.po: updated Portuguese file updated pot file 2002/07/31 Pixel * Xconfig/main.pm: - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) * install_steps_interactive.pm, printerdrake.pm, pkgs.pm, network/adsl.pm, modules.pm, commands.pm, install_interactive.pm, install_steps_gtk.pm, interactive/stdio.pm, services.pm, keyboard.pm: make new perl_checker happy make new perl_checker happy (and that's not easy!) * any.pm (devfssymlinkf): when creating a symlink on the system, use devfs name if devfs is mounted replace "$foo" with $foo make new perl_checker happy make new perl_checker happy (and that's not easy!) * Xconfig/test.pm: change the location of X test image as told by dadou * Xconfig/resolution_and_depth.pm (choose_gtk): ensure the response is one of @resolutions (so that Y and maybe bios is kept) (to_string): created fix using $_ instead of $_[0] (thanks to perl_checker) make new perl_checker happy (and that's not easy!) * network/modem.pm: replace "$foo" with $foo * resize_fat/info_sector.pm, Xconfig/xfreeX.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") * printer.pm, install_any.pm, detect_devices.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") replace "$foo" with $foo make new perl_checker happy make new perl_checker happy (and that's not easy!) * bootlook.pm, network/netconnect.pm, network/ethernet.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") make new perl_checker happy make new perl_checker happy (and that's not easy!) * network/tools.pm, install_gtk.pm, network/isdn.pm: replace "$foo" with $foo make new perl_checker happy make new perl_checker happy (and that's not easy!) * my_gtk.pm (create_box_with_title): create an empty box when there is no message (also don't set $o->{box} since unused outside of this function) replace "$foo" with $foo make new perl_checker happy make new perl_checker happy (and that's not easy!) * Xconfig/card.pm: - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) handle cancel in xfree_and_glx_choose default VideoRam choice 4096 when needVideoRam make new perl_checker happy make new perl_checker happy (and that's not easy!) * network/network.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") replace "$foo" with $foo - have is_ip return the 4 parts of the ip address - cleanup make new perl_checker happy (and that's not easy!) * interactive/gtk.pm: allow "icon" to use the icon path make new perl_checker happy (and that's not easy!) * Makefile, crypto.pm: make new perl_checker happy * Xconfig/monitor.pm: fix keeping the existing name when choosing monitor * resize_fat/main.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") make new perl_checker happy * standalone/mousedrake: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ what is needed for usbmouse is "hid mousedev usbmouse" not the weird "serial_usb" make new perl_checker happy * mouse.pm (read): don't look at /dev/mouse symlink to get {device}, sysconfig/mouse gives it, so why bother (this fixes /dev//dev/misc/psaux bug) make new perl_checker happy make new perl_checker happy (and that's not easy!) * standalone/logdrake, standalone/tinyfirewall, standalone/drakboot, standalone.pm, standalone/drakTermServ, standalone/net_monitor, standalone/drakbackup, standalone/printerdrake, standalone/drakconnect, standalone/drakxtv, standalone/draksec, standalone/drakxservices, standalone/drakautoinst, standalone/drakproxy, standalone/diskdrake, standalone/drakfloppy, standalone/drakfont, standalone/scannerdrake: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ * standalone/keyboarddrake, standalone/drakgw: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ make new perl_checker happy * install2.pm: allow acceptLicence to be automatic make new perl_checker happy make new perl_checker happy (and that's not easy!) * diskdrake/interactive.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") make new perl_checker happy (and that's not easy!) * standalone/XFdrake: Handle parsing --embedded command line in standalone.pm => allows to remove the somewhat mythical $::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/ - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) use configure_chooser when there is an existing configuration * log.pm, interactive.pm, resize_fat/fat.pm, network/smb.pm, raid.pm, partition_table.pm, diskdrake/hd_gtk.pm, install_steps.pm, swap.pm, resize_fat/directory.pm, devices.pm, lang.pm, partition_table/raw.pm, bootloader.pm, fsedit.pm, network/isdn_consts.pm: make new perl_checker happy (and that's not easy!) * Xconfig/various.pm: make perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}") - add non-wizard ability to XFdrake - first part of ATI TVout support (still needs patching initscript, and adding an entry in bootloader) (and testing of course :) (info): fix displaying depth 2002/07/31 Till Kamppeter * printerdrake.pm: Started working on network printer auto-detection. * detect_devices.pm: Added subroutines for ethernet printer auto-detection. 2002/07/31 Thierry Vignaud * harddrake/ui.pm: - bump harddrake version - module configuration is saved (todo: read the config) initial configuration window for modules. nothing is done yet. remove latest (?) gtk warnings don't display bogus fields in embedded mode, don't kill the main gtk app (aka drakconf) but only harddrake - add embedded mode for drakconf further simplification - the hw tree and the info text are auto-size now - further ui simplifications still more my_gtk simplifications ui.pm | 49 ++++++++++++++++--------------------------------- 1 files changed, 16 insertions(+), 33 deletions(-) - simplify Gtk::Text filling - less gtk warnings get printed further my_gtk simplifications further my_gtk simplifications further use of my_gtk - remove useless realizations - simplify ctree and frames creation - make used once callbacks be anonymous functions - replace scores of useless ->show() call by one show_all() call ui.pm | 82 +++++++++++++++++++++++++++--------------------------------------- 1 files changed, 34 insertions(+), 48 deletions(-) * printer.pm: "cp -a" doesn't need "echo yes|" * modparm.pm: split parameters in raw_parameters and parameters. raw_parameters is used by harddrake to list module options in order to offer a module configuration window. * harddrake/TODO: update - bump harddrake version - module configuration is saved (todo: read the config) in embedded mode, don't kill the main gtk app (aka drakconf) but only harddrake - add embedded mode for drakconf - bump version number - fix pcmcia network card detection (no more unknown) - fix scsi detection : o fix SCSI controllers detection (no more unknown) o fix misdetection of scsi devices as scsi host adapter o fix double scsi devices detection (both unknown and real category) - update TODO list * Makefile: rename a few target: - srpm -> slowsrpm - fastsrpm -> srpm * drakxtools.spec: 15mdk (will be released tomorrow before the beta2) don't require detect-lst, it'll take harddrake instead :-( 14mdk * harddrake/data.pm: - bump harddrake version - module configuration is saved (todo: read the config) - bump version number - fix pcmcia network card detection (no more unknown) - fix scsi detection : o fix SCSI controllers detection (no more unknown) o fix misdetection of scsi devices as scsi host adapter o fix double scsi devices detection (both unknown and real category) - update TODO list * share/po/fr.po: update fr translation 2002/07/30 alus * share/po/pl.po: variuos fixes and updates updates 2002/07/30 Christian Belisle * security/libsafe.pm: - complete re-write of draksec. splitted all the libsafe related functions in this file. * security/msec.pm, standalone/draksec: - complete re-write * security/main.pm: -complete re-write of draksec. The main functions will go in this file. 2002/07/30 Daouda Lo * Makefile.drakxtools: - mv drakbug executable from $$SBINDEST to $$BINDEST 2002/07/30 gbeauchesne * tools/Makefile, tools/aewm-drakx/Makefile: lib64 fixes 2002/07/30 Guillaume Cottenceau * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: reflect errata changes * install_steps_interactive.pm: have errata in parameter to not break too much updates 8.2->9.0 s/82errata.php3/90errata.php3/ 2002/07/30 Pablo Saratxaga * share/po/cs.po: updated po file 2002/07/30 Pixel * fs.pm: - call fsck.jfs before mounting read-write (otherwise mount simply fails) - propose fsck -y for ext2 when fsck -a fails * standalone/drakbackup: never EVER put $xxxx in to-be-translated strings!! * diskdrake/interactive.pm (Add2LVM): for LVM on RAID, ensure the RAID is created & enabled * Xconfig/parse.pm: fix handling of commented empty line * standalone/drakautoinst: use $o->{interactiveSteps} instead of @install_steps_auto_install::graphical_steps * keyboard.pm, c/stuff.xs.pl, detect_devices.pm, install_steps.pm: use usb keyboard bCountryCode to choose the right keyboard * install_steps_interactive.pm: use usb keyboard bCountryCode to choose the right keyboard - call fsck.jfs before mounting read-write (otherwise mount simply fails) - propose fsck -y for ext2 when fsck -a fails 2002/07/30 Till Kamppeter * printerdrake.pm: Better placement for waiting message. * printer.pm: Fixed a typo and a comment in the "SIGHUP_daemon()" function. 2002/07/30 Thierry Vignaud * share/po/fr.po: further translations update fr translation * standalone/drakbackup: don't translate useless strings (here: "\n") * standalone/drakbug: deush need to learn english 2002/07/29 Pixel * install_any.pm (g_auto_install): also save chosen on_services (this is the only thing left to do to make it work :) * mouse.pm: - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not install - don't display "Please test the mouse" either allow to not mess with X config auxmouse (that way mousedrake doesn't need to care about it) * run_program.pm: fix rooted() when chrooted and saving the result in a perl variable * Xconfig/resolution_and_depth.pm (configure_auto_install): really use resolution_wanted given in $o * partition_table.pm: cleanup * services.pm (ask_standalone_gtk, ask_install): only return the on_services (those functions used to return ($l, $on_services) which used in a scalar context returned $on_services) * standalone/mousedrake: - fix using deprecated Xconfig.pm - document dam's hack for test mouse - cleanup - don't bother reading XFree mouse config (using keep_auxmouse_unchanged of mouse::write_conf) * diskdrake/interactive.pm: nicer error message when "You can't create a new partition (since you reached the maximal number of primary partitions). First remove a primary partition and create an extended partition." * printer.pm: make perl_checker happy * standalone/XFdrake: make perl_checker happy (ask_for_X_restart): make it work 2002/07/29 Till Kamppeter * printer.pm: Fixed some "$prefix" issues in the HPOJ auto-configuration and in the Star Office/OpenOffice.org auto-configuration. 2002/07/29 Guillaume Cottenceau * install_any.pm: use aliases for stage1 params to reduce kernel msg 2002/07/29 Pablo Saratxaga * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file 2002/07/29 Pixel * mouse.pm: - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not install - don't display "Please test the mouse" either allow to not mess with X config auxmouse (that way mousedrake doesn't need to care about it) disallow big_help (when pressing F1) when testing mouse * install_any.pm (g_auto_install): also save chosen on_services (this is the only thing left to do to make it work :) * drakxtools.spec: remove "Requires: groff" (nobody know why it's there) (Pixel) * run_program.pm: fix rooted() when chrooted and saving the result in a perl variable * share/rpmsrate: xpcd is still there (deush) - remove deprecated packages - adapt some to their names * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fix typo * Xconfig/main.pm: restore xdm choice previous behaviour (auto_install) * Xconfig/resolution_and_depth.pm (configure_auto_install): really use resolution_wanted given in $o * fs.pm: fix mke2fs on loopback - use $::prefix for reading/writing (it was missing for writing) - use output_p so that /etc/samba directory is created if needed (fix bug reported by David Eastcott) * Xconfig/test.pm: try harder to have "xfs" running * partition_table.pm: cleanup * services.pm (ask_standalone_gtk, ask_install): only return the on_services (those functions used to return ($l, $on_services) which used in a scalar context returned $on_services) * standalone/mousedrake: - fix using deprecated Xconfig.pm - document dam's hack for test mouse - cleanup - don't bother reading XFree mouse config (using keep_auxmouse_unchanged of mouse::write_conf) * Xconfig/default.pm: fix default config for mouse * my_gtk.pm: disallow big_help (when pressing F1) when testing mouse * printer.pm: make perl_checker happy * diskdrake/interactive.pm: nicer error message when "You can't create a new partition (since you reached the maximal number of primary partitions). First remove a primary partition and create an extended partition." fix diskdrake::interactive::Options() excepts a value from fs::mount_options_pack(), but fs::mount_options_pack() doesn't return any value (reported by Olivier Thauvin) * standalone/XFdrake: make perl_checker happy (ask_for_X_restart): make it work * bootloader.pm: try to allow /boot on vfat (it used to work) * network/smb.pm: - use $::prefix for reading/writing (it was missing for writing) - use output_p so that /etc/samba directory is created if needed (fix bug reported by David Eastcott) * install_interactive.pm: fix partition wizard choice updating after calling diskdrake * install_steps_gtk.pm, install_steps_interactive.pm, install2.pm: ensure choosing install-or-upgrade can't be done twice (since it's badly handled and hard to handle nicely) 2002/07/29 Thierry Vignaud * standalone/drakxtv: read and wrote /etc/modules.conf * Makefile: - consolidate duplicated 'use (warn|strict...' into nuke_perl target - thus enable to fix bug reported by gc (aka i only fixed localsrpm nuke, not srpm: one) * drakxtools.spec: final changes batch - pixel: don't set release to 14mdk when 13mdk hadn't be released ... - list 13mdk changes replace trigger by format test for hw config file conversion 2002/07/28 Pixel * install_steps.pm (configureX, configureXBefore, configureXAfter): greatly simplified using new Xconfig stuff * standalone/XFdrake: - adapt to new Xconfig modules - try out the new "XFdrake resolution" and "XFdrake monitor" that'll get into DrakConf soon * Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm, Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm, Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm, Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules, will it be enough?? :) * any.pm (running_window_manager): return the pids found if wanted (ddcxinfos): ensure no probe is done when $::noauto * install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new Xconfig modules * install_any.pm (g_auto_install): no need to handle $o->{X} as a special case, it's already done by Xconfig::main::export_to_install_X * Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served well, you may now lie in peace * common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810' instead of a regexp * Xconfig/card.pm: make perl_checker happy rahh, don't commit my test code! 14 new modules, will it be enough?? :) * share/list: CardsNames is not needed anymore * interactive.pm: fix "nicer error message when {val} is not set for ask_from & list" in case of a reference to a reference (ref is REF instead of SCALAR) * Xconfig/main.pm: fix displaying info about current configuration 14 new modules, will it be enough?? :) * Xconfig/resolution_and_depth.pm: - make the gtk resolution chooser work - dropped the differenciation between embedded or not 14 new modules, will it be enough?? :) * mouse.pm (detect): return wacom inside $mouse (mouseconfig): reduce the number of "Use of undefined value" (set_xfree_conf): created * install2.pm: wacom is now inside $mouse * install_steps_interactive.pm (configureX): adapt to new Xconfig 2002/07/28 Pixel * Xconfig/main.pm: fix displaying info about current configuration 14 new modules, will it be enough?? :) * Xconfig/resolution_and_depth.pm: - make the gtk resolution chooser work - dropped the differenciation between embedded or not 14 new modules, will it be enough?? :) * install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new Xconfig modules * install_any.pm (g_auto_install): no need to handle $o->{X} as a special case, it's already done by Xconfig::main::export_to_install_X * mouse.pm (detect): return wacom inside $mouse (mouseconfig): reduce the number of "Use of undefined value" (set_xfree_conf): created * install_steps.pm (configureX, configureXBefore, configureXAfter): greatly simplified using new Xconfig stuff * install2.pm: wacom is now inside $mouse * standalone/XFdrake: - adapt to new Xconfig modules - try out the new "XFdrake resolution" and "XFdrake monitor" that'll get into DrakConf soon * Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm, Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm, Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm, Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules, will it be enough?? :) * Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served well, you may now lie in peace * install_steps_interactive.pm (configureX): adapt to new Xconfig * any.pm (running_window_manager): return the pids found if wanted (ddcxinfos): ensure no probe is done when $::noauto * Xconfig/card.pm: make perl_checker happy rahh, don't commit my test code! 14 new modules, will it be enough?? :) * common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810' instead of a regexp * interactive.pm: fix "nicer error message when {val} is not set for ask_from & list" in case of a reference to a reference (ref is REF instead of SCALAR) 2002/07/28 Stew Benedict * standalone/drakTermServ: Check for/install terminal-server and friends. More intelligent error message when mkisofs fails. Cleanup code for use strict. Fix crash when no backup dhcpd.conf. * standalone/drakbackup: Numerous GUI crash fixes, oddities. Install needed packages. Fix email, daemon modes. Add rsync, webdav, cd, tape capabilities. Consolidate net method setup screens. Add CD device capability query. 2002/07/27 alus * share/po/pl.po: Fixes. There're some entries concerning mdk 8.2 - they should be changed globally 2002/07/27 Pixel * modules.pm (add_probeall): use "uniq" to have modules only once in ddebug.log (a "uniq" was already in modules.conf so it doesn't change the result) * detect_devices.pm: use add_probeall for scsi_hostadapter, not add_alias (may fix a bug reported by Jure Repinc) 2002/07/27 Till Kamppeter * printer.pm, printerdrake.pm: Completed implementation of the support for HPOJ 0.9: Automatic photo card reader configuration, bugfixes. 2002/07/26 Daouda Lo * standalone/logdrake: - more consistency when back button hit in wizard mode - back button at last stage. * standalone/drakbug: - add browser list in case BROWSER env var isn't set 2002/07/26 Franois Pons * tools/Makefile: fixed reference to rpmtools perl module. 2002/07/26 Guillaume Cottenceau * mdk-stage1/rescue-gui.c: - usage of attribute unused (has not been rebuilt since -W? ;p) - since i polluted the newt-frontend with probing functions, i need to have probing functions (doing nothing) here :-(( 2002/07/26 Pablo Saratxaga * harddrake/ui.pm: changed _("") -> "" empty strings must not be translated 2002/07/26 Pixel * rescue/list: remove traceroute (c naze dixit gc) * share/gen_locales.sh, lang.pm: hy is now using UTF8 locales * any.pm, services.pm, install_steps.pm: use run_program::rooted_get_stdout instead of `chroot $prefix ...` * install_any.pm: use run_program::rooted_get_stdout * Xconfigurator.pm: cleanup launching qiv (using run_program) * bootloader.pm: - fix dying when mkinitrd doesn't create an initrd - cleanup * run_program.pm (rooted_get_stdout): handle one line return using wantarray - also give the ability to redirect to an array ref - add rooted_get_stdout which is alike `` add 2 functionalities to run_program: - run_program::run(prog, '>', 'STDOUT', ...) run_program::run(prog, '2>', 'STDERR, ...) which will run with verbatim stdout or stderr - run_program::run(prog, '>', \$s, ...) run_program::run(prog, '2>', \$s, ...) which will return the stdout (resp. stderr) of the program in $s * rescue/Makefile: ensure rescue is built and uploaded 2002/07/26 Thierry Vignaud * harddrake/TODO: dadou said "no expert mode" * harddrake/ui.pm: - s/channel/Channel/ - bus_id is for usb devices too - remove obsolete fields info and name - add nbuttons, device, old_device descriptions * drakxtools.spec: 13mdk 2002/07/26 Franois Pons * tools/Makefile: fixed reference to rpmtools perl module. 2002/07/26 Till Kamppeter * printer.pm: First step of automatic HP multi-function device configuration with HPOJ 0.9. * detect_devices.pm: Added detection of trhe serial number of a USB printer (in preparation for HPOJ 0.9 support in printerdrake). 2002/07/25 Pixel * install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc you did all the work to resolve the pb) => this fixes ide burner detection 2002/07/25 alus * share/po/pl.po: fix fix one entry more clearly :) 2002/07/25 Daouda Lo * standalone/logdrake: - don't display services that are not installed - word wrap string correctly - cleanup 2002/07/25 Franois Pons * pkgs.pm: added log. small code changes for upgrade. * tools/syncrpms: no more use rpmtools.pm. * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new logo (simplified for 9.0). 2002/07/25 Pablo Saratxaga * share/po/nl.po, share/po/id.po, share/po/vi.po: updated po files 2002/07/25 Pixel * my_gtk.pm: use a function icon_paths instead of @icon_paths => this ensure that $ENV{SHARE_PATH} value (used in @icon_paths) is set independently of the loading order of the modules * install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc you did all the work to resolve the pb) => this fixes ide burner detection Help "perl -cw" not reporting any warning - for mac free partition, use $freepart instead of $freepart_device, $freepart_size ... - replace $timezone::ntp_servers by a function * bootloader.pm: let the bootloader::mkinitrd error be seen by the GUI * install_steps_newt.pm: please "perl -cw" * verify_c: adapt to stuff.xs.pl instead of stuff.xs.pm * partition_table.pm: add 0x35 partition table id meaning JFS (under OS/2) (thank to Mika Laitio) * fs.pm: noreturn is now exported, no need to MDK::Common::Various::noreturn() * common.pm: remove internal_error (which is now in MDK::Common) * partition_table/mac.pm, timezone.pm: Help "perl -cw" not reporting any warning - for mac free partition, use $freepart instead of $freepart_device, $freepart_size ... - replace $timezone::ntp_servers by a function 2002/07/25 Thierry Vignaud * drakxtools.spec: 12mdk final batch of changes 11mdk * harddrake/TODO: still less things to do update * c/stuff.xs.pl: don't copy struct pciusb_entries on the stack * standalone/service_harddrake: merge timeout and cancel cases simplify: - we don't need to set media_type, we don't use it - mouse and mass storage media use the same key, let merge their code path * interactive/newt.pm: typo fix * Makefile.drakxtools: fix pixel "i do not need to test" fscking bug that broke drakxtools build :-) * harddrake/ui.pm: remove all gtk's "no callback/signal to disconnect" warnings add a fields data structure: - put together field translation and field description - this enable to get rid of %reverse_fields usage & creation - this ensure all field names & translations are marked translatables for gettext - move $wait declaration around its usage and explicit its destruction - remove usb debugging message needed to trace the null description bug i fixed in ldetect - simplify the device fields rendering "because of" the above - simplify the help window creation/display/destruction (only one statement left) - explicitely call interactive->exit handle both old device name and new devfs name * share/po/fr.po: update french translation * harddrake/data.pm: only do one probeall here (there's still many in detect_devices, probing caching should go there) * Makefile: use spec_test rather than test 2002/07/24 alus * share/po/pl.po: fixes the last untranslated entry 2002/07/24 Guillaume Cottenceau * mdk-stage1/cdrom.c, mdk-stage1/disk.c, mdk-stage1/tools.c, mdk-stage1/stage1.h, mdk-stage1/tools.h, mdk-stage1/frontend.h, mdk-stage1/probing.h, mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c, mdk-stage1/probing.c: enhance (complicate? ;p) device detection so that scsi and usb detection are done only when no ide cdrom with mandrake install is detected (speed up), have usb keyboard modules installed before any interactive question, honour "noauto" (skip usb detection and insmod'ing) 2002/07/24 Pablo Saratxaga * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated po files 2002/07/24 Pixel * Makefile, Makefile.drakxtools: add PMS_DIRS in Makefile.config and use it everywhere (cleaning some ugly stuff in Makefile.drakxtools while doing so) => now adding a new directory only need to be done at one place * Xconfig/xfree3.pm, Xconfig/xfreeX.pm, mouse.pm, Xconfig/xfree4.pm, Xconfig/parse.pm: new XFree handling library - only keyboard and mice functions are done, but adding the others is quite easy - so for now only used in mousedrake - but keyboarddrake and (of course) XFdrake will come * Makefile.config: add Xconfig add PMS_DIRS in Makefile.config and use it everywhere (cleaning some ugly stuff in Makefile.drakxtools while doing so) => now adding a new directory only need to be done at one place * standalone/keyboarddrake: use Xconfig::xfree to set the XkbLayout (better should&will come) * c/stuff.xs.pl, c/Makefile, c/stuff.xs.pm: rename stuff.xs.pm to stuff.xs.pl (since it's a prog, not a module) (it helps for not having stuff.xs.pm in PMS) * Xconfig/xfree.pm (get_both): fix returning one element (eg: get_keyboard) new XFree handling library - only keyboard and mice functions are done, but adding the others is quite easy - so for now only used in mousedrake - but keyboarddrake and (of course) XFdrake will come * log.pm: when testing, log on STDERR 2002/07/24 Thierry Vignaud * harddrake/data.pm: don't account scanners as unknown devices * harddrake/ui.pm: scanners support: - split scannerdrake:val into vendor and description - don't display bogus "val:%HASH" 2002/07/23 alus * share/po/pl.po: fuzzy cheched 2002/07/23 Christian Belisle * security.pm: removal 2002/07/23 Daouda Lo * security/msec.pm: - fix typo: s/%%options;/%%options/ 2002/07/23 Franois Pons * pkgs.pm: manage correctly unselectPackage and use perl-URPM >= 0.50. 2002/07/23 Guillaume Cottenceau * mdk-stage1/probing.c: s/usb/moreprofessional/ thanks to vdanen 2002/07/23 Pixel * share/po/help-eu.pot: rebuild after replacing \" by " * any.pm, interactive.pm: use fuzzy_pidofs (to detect if kwin is running) * detect_devices.pm: handle computers with no /proc/scsi/scsi * .cvsignore, share/modparm.lst, Makefile: modparm.lst is not used anymore (modinfo -p) 2002/07/23 Thierry Vignaud * share/po/fr.po: further translations update update french translation * drakxtools.spec: 10mdk changes final changes batch 9mdk g Move 2: partition table: hierarchy - Big Move 1: interactive::* hierarchy * partition_table_dos.pm, partition_table/dos.pm, partition_table_mac.pm, partition_table/sun.pm, partition_table/gpt.pm, partition_table_raw.pm, partition_table_lvm_PV.pm, partition_table_empty.pm, standalone.pm, partition_table_sun.pm, partition_table_bsd.pm, install_interactive.pm, partition_table/raw.pm, partition_table.pm, any.pm, partition_table/mac.pm, partition_table/bsd.pm, bootloader.pm, diskdrake/hd_gtk.pm, partition_table/empty.pm, fsedit.pm, partition_table/lvm_PV.pm, partition_table_gpt.pm: g Move 2: partition table: hierarchy * Makefile.config, install_steps.pm, install_steps_interactive.pm, diskdrake/interactive.pm, Makefile.drakxtools, install_any.pm: g Move 2: partition table: hierarchy - Big Move 1: interactive::* hierarchy * harddrake/ui.pm: remove dead code remove dead args about and help windows: only show "OK" button, cancel one has no purpose here * detect_devices.pm: remove '-' before description for IBM eide hard disks g Move 2: partition table: hierarchy * standalone/service_harddrake: faster service startup * interactive_newt.pm, interactive.pm, standalone/drakautoinst, install_steps_stdio.pm, standalone/tinyfirewall, Xconfigurator.pm, standalone/drakboot, standalone/diskdrake, standalone/mousedrake, install_steps_newt.pm, printerdrake.pm, interactive_gtk.pm, install_steps_gtk.pm, interactive/http.pm, interactive/stdio.pm, interactive/newt.pm, services.pm, standalone/drakconnect, standalone/drakgw, interactive/gtk.pm, interactive_http.pm, interactive_stdio.pm, standalone/drakxtv: - Big Move 1: interactive::* hierarchy * Makefile: check make got correct tag from spec file fast build: new target (fastsrpm = cvstag localsrpm) g Move 2: partition table: hierarchy - Big Move 1: interactive::* hierarchy * harddrake/data.pm: s/drakconnet/drakconnect * harddrake/TODO: update 2002/07/22 Pixel * any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto, hardwire no probing in detect_devices::probeall to ensure no probing is never done * share/po/help-fr.pot, share/po/help-de.pot, share/po/help-eu.pot, help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-es.pot, share/po/help-it.pot: - update help.pm based on the xml manual - this fixes entities sticked together with no space in between - this also implies a few bad line-wrapping changes, but it needs to be done to have a clean state (we don't have one since 8.2beta where i updated things by hand) - put help-*.pot in CVS so that the files based on the xml manual can be updated independently from DrakX.pot & .po's * Newt/Makefile, resize_fat/Makefile, c/Makefile: ensure things build as they should when perl is upgraded on compilation box (using a nice scheme: make || make) 2002/07/22 Till Kamppeter * printer.pm, printerdrake.pm: Adapted printerdrake to CUPS 1.1.15 and Perl 5.8.0 (for Foomatic). Let network also be started during installation when LPRng or PDQ is the spooler, so that the user can install queues to remote printers. 2002/07/22 Damien Chaumette * network/tools.pm: hide password in adsl configuration 2002/07/22 Franois Pons * pkgs.pm: try avoiding infinite loop. 2002/07/22 Pablo Saratxaga * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/el.po, share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file * share/po/cs.po: updated Czech file updated pot file 2002/07/22 Pixel * c/Makefile, Newt/Makefile, resize_fat/Makefile: ensure things build as they should when perl is upgraded on compilation box (using a nice scheme: make || make) * any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto, hardwire no probing in detect_devices::probeall to ensure no probing is never done * help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-de.pot, share/po/help-fr.pot, share/po/help-eu.pot, share/po/help-es.pot, share/po/help-it.pot: - update help.pm based on the xml manual - this fixes entities sticked together with no space in between - this also implies a few bad line-wrapping changes, but it needs to be done to have a clean state (we don't have one since 8.2beta where i updated things by hand) - put help-*.pot in CVS so that the files based on the xml manual can be updated independently from DrakX.pot & .po's * share/po/help_xml2pm.pl: - use new PerlIO instead of iconv - transliterate by hand &ndash and é - move "use utf8" at top - fix the spaces between entities (eg: &company-microsoft; &os-windows; must not be MicrosoftWindows) 2002/07/21 Pixel * drakxtools.spec: new snapshot * Xconfigurator.pm: fix multi-head auto-choosing in auto install * install_any.pm: workaround "traverse_tag" pb in Resolve.pm resolve_requested (is it ok??) 2002/07/21 Pixel * drakxtools.spec: new snapshot * install_any.pm: workaround "traverse_tag" pb in Resolve.pm resolve_requested (is it ok??) 2002/07/21 Pixel * Xconfigurator.pm: Load "extmod" is a must! (for things like shape and dga) * Xconfig.pm: fix typo 2002/07/21 Pixel * Xconfigurator.pm: Load "extmod" is a must! (for things like shape and dga) * Xconfig.pm: fix typo * share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build in gen_locales.pl * share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks using the new::during_install__lang2charset -> this enables doing the same during install when using ramdisk => no need to have a locale.cz2 anymore (this is now possible since the number of special cases is lower than before) * lang.pm: - remove utf_xxx charsets, adding a flag UTF-8 instead - add during_install__lang2charset - when using ramdisk, no locale.cz2 anymore: there are 3 main charsets containing everything for all locales, except LC_CTYPE by default, there is UTF-8. when asked for GB2312 or BIG5, removing the other main charsets - cleanup comments (use #- instead of #) - various cleanup * tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main charset /usr/share/locale/UTF-8 2002/07/21 Pixel * share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build in gen_locales.pl * share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks using the new::during_install__lang2charset -> this enables doing the same during install when using ramdisk => no need to have a locale.cz2 anymore (this is now possible since the number of special cases is lower than before) * lang.pm: - remove utf_xxx charsets, adding a flag UTF-8 instead - add during_install__lang2charset - when using ramdisk, no locale.cz2 anymore: there are 3 main charsets containing everything for all locales, except LC_CTYPE by default, there is UTF-8. when asked for GB2312 or BIG5, removing the other main charsets - cleanup comments (use #- instead of #) - various cleanup * tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main charset /usr/share/locale/UTF-8 2002/07/20 Daouda Lo * standalone/drakbug: - complete app list 2002/07/20 Pixel * Xconfigurator_consts.pm: shorter and nicer XF86Config's * mouse.pm: devfssymlinkf doesn't have any return value, so don't check it * Xconfig.pm (getinfoFromXF86Config): move here setting prefer_xf3 based on current choice on system shorter and nicer XF86Config's * install_gtk.pm: - rename updateCardAccordingName into add_to_card__using_Cards - rename cardConfigurationAuto into probe_cards - cleanup the simple XF86Config used during install * install_steps.pm: call config_dvd with $have_devfsd * install_steps_gtk.pm: - rename updateCardAccordingName into add_to_card__using_Cards - rename cardConfigurationAuto into probe_cards * any.pm: try very hard to make rdvd work: - if not using devfs, it worked so keeping things unchanged - if using devfs, using the new dynamic rawdevice.script script to bind a rawdevice on demand pb: can't have both a devfs and a non-devfs config, the /etc/sysconfig/rawdevices solution gives errors with devfs (since the dvd is not REGISTERed yet) please perl_checker fix typo (devfssymlinkf): use devfs names for devfs/conf.d/xxx.conf, but not for the symlink in /dev (which is used when devfs is not) devfssymlinkf doesn't have any return value, so don't check it * Xconfigurator.pm: - $in and $do_pkgs are no more global => it's now easier to keep track of interactive vs non-interactive functions - rename updateCardAccordingName into add_to_card__using_Cards - rename cardConfigurationAuto into probe_cards - and a few other function renamings shorter and nicer XF86Config's 2002/07/19 Pixel * Xconfigurator.pm: - reorganize monitor tree - merge XF3 & XF4 server/module choosing - replace {eide} by {EISA_ID} (=> {monitor} cleanup) - ensure a few "Cancel" are more better handled - ensure the default monitor in the monitor tree is the last chosen one * Xconfigurator_consts.pm: - fix good_default_monitor (must not be 1600x1200!) - add r128 & radeon in XF4 drivers list * interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used place (useful when debugging) * Xconfig.pm: read monitor's VendorName & ModelName 2002/07/19 Damien Chaumette * network/adsl.pm: - check if speedtouch_mgmt exist before installing it 2002/07/19 Franois Pons * any.pm: revert changes so that DrakX work again. * install_any.pm: select default_packages directly during setPackages. * install_steps_interactive.pm: make sure unselectMostPackages is called (so that changes in default_packages are taken into account... but is may be any changes here ?). 2002/07/19 Pixel * Xconfigurator_consts.pm: - fix good_default_monitor (must not be 1600x1200!) - add r128 & radeon in XF4 drivers list fix default_monitors to adapt new MonitorsDB * mouse.pm (devfssymlinkf): use devfs_device instead of device when available * partition_table.pm: handling devfs names for cdrom/hds on ide/scsi (needs testing) * any.pm (devfssymlinkf): try devices::to_devfs when devfs_device is not provided (devfssymlinkf): use devfs_device instead of device when available * detect_devices.pm: help perl_checker handling devfs names for cdrom/hds on ide/scsi (needs testing) * devices.pm: add functions to_devfs and from_devfs. These only work for devices entries which can go devfs -> normal and normal -> devfs * interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used place (useful when debugging) * Xconfig.pm: read monitor's VendorName & ModelName (readCardsDB): add handling BAD_FB_RESTORE & BAD_FB_RESTORE_XF3 * Xconfigurator.pm: - reorganize monitor tree - merge XF3 & XF4 server/module choosing - replace {eide} by {EISA_ID} (=> {monitor} cleanup) - ensure a few "Cancel" are more better handled - ensure the default monitor in the monitor tree is the last chosen one partly cleanup monitor re-configuration (work in progress) 2002/07/19 Christian Belisle * any.pm: - remove any msec related functions - remove 'use security::msec' 2002/07/19 Damien Chaumette * network/adsl.pm: - check if speedtouch_mgmt exist before installing it 2002/07/19 Franois Pons * any.pm: revert changes so that DrakX work again. * install_any.pm: select default_packages directly during setPackages. fix typo on what_provides (for pitchounette :-)). added what_provides. * standalone.pm: fix typo on last commit. added what_provides. * install_steps_interactive.pm: make sure unselectMostPackages is called (so that changes in default_packages are taken into account... but is may be any changes here ?). 2002/07/19 Pablo Saratxaga * share/po/pt.po: updated Portuguese file 2002/07/19 Pixel * standalone/XFdrake: rename $i in $X (to have the same as Xconfigurator.pm) * interactive.pm: nicer error message when {val} is not set for ask_from & list * Xconfigurator.pm: partly cleanup monitor re-configuration (work in progress) - don't write XF86Config when no {card}{server} - don't write XF86Config-4 when no {card}{driver} - workaround mixing values from existing config and cardConfigurationAuto() - fix asking VideoRam - fix device0 in XF86Config - use "device1", "device2"... for "Device" Identifier - restore having a nice VendorName + BoardName (since Identifier is not very useful) - get {card}{Chipset} from existing XF86Config - use $::prefix - drop obsolete stuff: Ramdac, Dacspeed, Clockchip - drop {card}{flags}, the few flags are moved directly to {card} - force_xf4 is now a global in Xconfigurator - create new functions for better modularity: multi_head_config, xfree_and_glx_choices, xfree_and_glx_choose - for ppc, allow choosing DRI or not - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding wether to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX} are only flags allowing or not DRI/UTAH. - {card}{use_xf4} is dropped. New function using_xf4 has this functionality. The flags are now: - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3 - error if $force_xf4 && !{driver} || !{driver} && !{server} - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} && !{server} - {card}{description} contains what used to be {card}{identifier} - rename {card}{type} to {card}{card_name} - drop {monitor}{type} * install_steps.pm: don't pass the prefix parameter, not needed/wanted anymore * Xconfigurator_consts.pm: fix default_monitors to adapt new MonitorsDB * Xconfig.pm (readCardsDB): add handling BAD_FB_RESTORE & BAD_FB_RESTORE_XF3 - use "device1", "device2"... for "Device" Identifier - restore having a nice VendorName + BoardName (since Identifier is not very useful) - get {card}{Chipset} from existing XF86Config - use $::prefix - drop obsolete stuff: Ramdac, Dacspeed, Clockchip - drop {card}{flags}, the few flags are moved directly to {card} - force_xf4 is now a global in Xconfigurator - create new functions for better modularity: multi_head_config, xfree_and_glx_choices, xfree_and_glx_choose - for ppc, allow choosing DRI or not - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding wether to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX} are only flags allowing or not DRI/UTAH. - {card}{use_xf4} is dropped. New function using_xf4 has this functionality. The flags are now: - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3 - error if $force_xf4 && !{driver} || !{driver} && !{server} - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} && !{server} - {card}{description} contains what used to be {card}{identifier} - rename {card}{type} to {card}{card_name} - drop {monitor}{type} 2002/07/19 Christian Belisle * any.pm: - remove any msec related functions - remove 'use security::msec' 2002/07/19 Damien Chaumette * standalone/drakconnect: - any::setup_thiskind_backend changed in any::load_category_no_message 2002/07/19 Pablo Saratxaga * share/po/pt.po: updated Portuguese file 2002/07/19 Pixel * standalone/XFdrake: rename $i in $X (to have the same as Xconfigurator.pm) * Xconfigurator.pm: - don't write XF86Config when no {card}{server} - don't write XF86Config-4 when no {card}{driver} - workaround mixing values from existing config and cardConfigurationAuto() - fix asking VideoRam - fix device0 in XF86Config - use "device1", "device2"... for "Device" Identifier - restore having a nice VendorName + BoardName (since Identifier is not very useful) - get {card}{Chipset} from existing XF86Config - use $::prefix - drop obsolete stuff: Ramdac, Dacspeed, Clockchip - drop {card}{flags}, the few flags are moved directly to {card} - force_xf4 is now a global in Xconfigurator - create new functions for better modularity: multi_head_config, xfree_and_glx_choices, xfree_and_glx_choose - for ppc, allow choosing DRI or not - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding wether to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX} are only flags allowing or not DRI/UTAH. - {card}{use_xf4} is dropped. New function using_xf4 has this functionality. The flags are now: - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3 - error if $force_xf4 && !{driver} || !{driver} && !{server} - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} && !{server} - {card}{description} contains what used to be {card}{identifier} - rename {card}{type} to {card}{card_name} - drop {monitor}{type} * interactive.pm: nicer error message when {val} is not set for ask_from & list * Xconfig.pm: - use "device1", "device2"... for "Device" Identifier - restore having a nice VendorName + BoardName (since Identifier is not very useful) - get {card}{Chipset} from existing XF86Config - use $::prefix - drop obsolete stuff: Ramdac, Dacspeed, Clockchip - drop {card}{flags}, the few flags are moved directly to {card} - force_xf4 is now a global in Xconfigurator - create new functions for better modularity: multi_head_config, xfree_and_glx_choices, xfree_and_glx_choose - for ppc, allow choosing DRI or not - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding wether to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX} are only flags allowing or not DRI/UTAH. - {card}{use_xf4} is dropped. New function using_xf4 has this functionality. The flags are now: - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3 - error if $force_xf4 && !{driver} || !{driver} && !{server} - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} && !{server} - {card}{description} contains what used to be {card}{identifier} - rename {card}{type} to {card}{card_name} - drop {monitor}{type} * install_steps.pm: don't pass the prefix parameter, not needed/wanted anymore 2002/07/18 Christian Belisle * standalone/draksec: create the main() function in security.pm * security.pm: Re-Addition: will contain the security related (but not related to any apps) funtioncs and the draksec interface. removing * security/msec.pm: - add prefix var in file names - remove useless expert_mode var - add get_options(): will be used to get various options from msec move the msec related functions from any.pm to msec.pm. create sec_options 2002/07/18 Damien Chaumette * network/netconnect.pm: . draknet renamed in drakconnect 2002/07/18 Franois Pons * install_any.pm: fixes allowNVIDIA_rpms against perl-URPM. really fixes it. fixes error if package is not found (regression fixed). * pkgs.pm: removed all the commented out code obsoleted. fix speed improvement for computeGroupSize by computing closure directly (in order to have an approximative size, not the real one). add back change CD support. * standalone/XFdrake: fixes with new urpm library of urpmi. 2002/07/18 Pixel * install2.pm: - set $::prefix - drop $o->{root} (was "/tmp/root-perl-install" when testing but completly unused) * standalone/XFdrake, install_steps_interactive.pm: don't pass the prefix parameter, not needed/wanted anymore * Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: - %standard_monitors are now in Cards+, dropping them - multi head support generalized, now based on Cards+ MULTI_HEAD - fix some ModeLines being written twice in XF86Config - remove setting DefaultFbBpp to 32 (since it is the default in all my tests) * common.pm, install_any.pm: use $::prefix instead of $::o->{prefix} 2002/07/18 Stew Benedict * install_any.pm, install_steps_interactive.pm: add support/option for Windows(tm) authentication via winbind 2002/07/18 Thierry Vignaud * drakxtools.spec: 7mdk changes 6mdk final changes * harddrake/bttv.pm: useless standalone dependancy for pixel fscking checker * Makefile: faster startup: remove use (diagnostics|vars|strict) in srpm target as in local target (dams fsck) * harddrake/TODO: update * harddrake/data.pm: s/draknet/drakconnect/ - bump version number - move scsi & ata controllers, tv-audio, dvd, burners, ... in their own "non configurable" sections 2002/07/18 warly * share/logo-mandrake.png: install logo for 9.0 beta 1 2002/07/18 Franois Pons * pkgs.pm: fix speed improvement for computeGroupSize by computing closure directly (in order to have an approximative size, not the real one). add back change CD support. 2002/07/18 Pixel * Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: - %standard_monitors are now in Cards+, dropping them - multi head support generalized, now based on Cards+ MULTI_HEAD - fix some ModeLines being written twice in XF86Config - remove setting DefaultFbBpp to 32 (since it is the default in all my tests) 2002/07/17 alus * share/po/pl.po: some more fixes some little changes 2002/07/17 Franois Pons * install_steps_gtk.pm: added missing use pkgs. 2002/07/17 Guillaume Cottenceau * pkgs.pm: spell right harddrake (two 'd') in @preferred * tools/cvslog2changelog.pl: add daouda chaumette cbelisle 2002/07/17 Pixel * install_gtk.pm: normalize Modeline to ModeLine * common.pm: add function "internal_error" (a specialized "die") * drakxtools.spec: the new XFdrake needs latest ldetect-lst * Makefile (test_pms): exclude urpm from uses * printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected by new perl_checker) remove "$_ =~ " (as detected by new perl_checker) * any.pm: move the "if !$::testing" for not modifying inittab in function runlevel() (was in install_steps.pm) * commands.pm: remove "$_ =~ " (as detected by new perl_checker) * Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm, standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework - use $X instead of $o (to avoid name conflict with DrakX's $o) - {flag}{noclockprobe} unused, dropping it - rename {memory} into "VideoRam" - rename {ramdac} into {Ramdac} - rename {chipset} into {Chipset} - rename {clockchip} into {Clockchip} - rename {keyboard}{xkb_model} into {keyboard}{XkbModel} - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout} - drop {mouse}{chordmiddle} (obsolete) - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config) - &testConfig is unused, removing it - as a concequence, {clocklines} is never set, dropping it - when UNSUPPORTED remove {driver}, instead of setting {flag}{unsupported} - Cards+ now only provide {Chipset} for cards needing it => {flag}{needChipset} not needed anymore - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM) (hoping it will work: since the regexp was broken, it was never done. (it was applied on the module field of pcitable, instead of the description)) - dropped modelines_text_Trident_TG_96xx case (it has never been used) - rename %xkb_options into %XkbOptions - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+ instead of regexp'ing {identifier} - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+ instead of regexp'ing {identifier} - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the value now comes from Cards+ instead of regexp'ing {identifier} - very_bad_card and bad_card are now the same, the value now comes from Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3) - drop unused @accelservers - remove $modelines_text_apple, use $modelines_text_ext instead - don't use a
together with , put directly modelines in Section "Monitor" (why should ppc behave differently than others!?) - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos) - drop ModeLine "640x480 @ 72 Hz" (it conflicts, and anyway, it has no real use nowadays :) - drop comments about HorizSync, VertRefresh and ModeLine's from XF86Config - drop many unneeded stuff from XF86Config: AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes, XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl - drop section comments from XF86Config - drop XF86_Mono configuration (it doesn't work anyway, seems like it needs a special ModeLine?) - drop 320x200 with XF86_SVGA (who can use this!?) - do not write Screen section "accel" if the server configured is not an accel one - drop the "Generic VGA" Device section for XF4 (this device is unused) - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor}, {card}{model}, {card}{board} (only description strings, not useful for running the server) - use x_res instead of wres for things like 1024 in 1024x768 2002/07/17 Franois Pons * install_steps_gtk.pm: added missing use pkgs. 2002/07/17 Guillaume Cottenceau * pkgs.pm: spell right harddrake (two 'd') in @preferred 2002/07/17 Pixel * install_gtk.pm: normalize Modeline to ModeLine * common.pm: add function "internal_error" (a specialized "die") * drakxtools.spec: the new XFdrake needs latest ldetect-lst * Makefile (test_pms): exclude urpm from uses * printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected by new perl_checker) remove "$_ =~ " (as detected by new perl_checker) * any.pm: move the "if !$::testing" for not modifying inittab in function runlevel() (was in install_steps.pm) * commands.pm: remove "$_ =~ " (as detected by new perl_checker) * Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm, standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework - use $X instead of $o (to avoid name conflict with DrakX's $o) - {flag}{noclockprobe} unused, dropping it - rename {memory} into "VideoRam" - rename {ramdac} into {Ramdac} - rename {chipset} into {Chipset} - rename {clockchip} into {Clockchip} - rename {keyboard}{xkb_model} into {keyboard}{XkbModel} - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout} - drop {mouse}{chordmiddle} (obsolete) - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config) - &testConfig is unused, removing it - as a concequence, {clocklines} is never set, dropping it - when UNSUPPORTED remove {driver}, instead of setting {flag}{unsupported} - Cards+ now only provide {Chipset} for cards needing it => {flag}{needChipset} not needed anymore - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM) (hoping it will work: since the regexp was broken, it was never done. (it was applied on the module field of pcitable, instead of the description)) - dropped modelines_text_Trident_TG_96xx case (it has never been used) - rename %xkb_options into %XkbOptions - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+ instead of regexp'ing {identifier} - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+ instead of regexp'ing {identifier} - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the value now comes from Cards+ instead of regexp'ing {identifier} - very_bad_card and bad_card are now the same, the value now comes from Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3) - drop unused @accelservers - remove $modelines_text_apple, use $modelines_text_ext instead - don't use a
together with , put directly modelines in Section "Monitor" (why should ppc behave differently than others!?) - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos) - drop ModeLine "640x480 @ 72 Hz" (it conflicts, and anyway, it has no real use nowadays :) - drop comments about HorizSync, VertRefresh and ModeLine's from XF86Config - drop many unneeded stuff from XF86Config: AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes, XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl - drop section comments from XF86Config - drop XF86_Mono configuration (it doesn't work anyway, seems like it needs a special ModeLine?) - drop 320x200 with XF86_SVGA (who can use this!?) - do not write Screen section "accel" if the server configured is not an accel one - drop the "Generic VGA" Device section for XF4 (this device is unused) - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor}, {card}{model}, {card}{board} (only description strings, not useful for running the server) - use x_res instead of wres for things like 1024 in 1024x768 2002/07/16 alus * share/po/pl.po: unused string removed 2002/07/16 cbelisle * standalone/draksec: re-write the part setting the security admin * security.pm: draksec - initial commit. preparing for the advanced section. * any.pm: draksec: - rewrite the function to set the security admin - remove ugly buttons, 'advanced' button will come later 2002/07/16 dchaumette * standalone/drakbug, standalone/interactive_http/authorised_progs, standalone/drakxconf: o finish moving draknet to drakconnect in standalone 2002/07/16 Franois Pons * pkgs.pm: update with newer perl-URPM. added log (finding packages to upgrade or computing installed flag) * install_steps.pm: removed useless package selection cleaning. * install_steps_gtk.pm: code cleanup. * install_steps_interactive.pm: improve a little. fixed missing upgrade. added wait message when finding packages to upgrade. * install2.pm: fixed reference to step 'selectPackagesToUpgrade'. * install_any.pm: fixed die when choosePackages step is redone. * crypto.pm: allow upgrade (if any) by using version at 8.2. 2002/07/16 Guillaume Cottenceau * any.pm: small english fix thx to vdanen * share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po, share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po, share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/hu.po: reflect typo fix in any.pm in the po's so that the translation are not broken * mdk-stage1/stage1.c: extend a bit fatal error when trying to execute /usr/bin/runinstall2 and it's not possible 2002/07/16 Pixel * standalone/drakTermServ: fix "$" in translated string * Makefile: don't display etags command (too long, not nice) 2002/07/15 daouda * standalone/drakbug: - isStandalone is set in standalone.pm, removed * standalone/draksec: - isStandalone is set in standalone.pm, removed. - set isStandalone to 1 to center wait messages 2002/07/15 Franois Pons * install2.pm: synced. * install_any.pm: synced with other module updated. * c/stuff.xs.pm: cleaned no more used method. * pkgs.pm: made upgrade almost work again (need testing and remove/deselect still doesn't work properly). * install_steps.pm: code re-organisation (a little). * install_steps_gtk.pm: fixed flag usage (still check selected package to upgrade but already selected are correctly shown). 2002/07/15 Pixel * ChangeLog: revert titi's error 2002/07/11 Pixel * rescue/list.i386: switch to vendor_perl 2002/07/10 daouda * standalone/drakbug: - code update - use local http server for test. 2002/07/10 Franois Pons * install_steps.pm, install_steps_gtk.pm, crypto.pm, share/list, pkgs.pm, install_any.pm, install2.pm, install_steps_interactive.pm: use perl-URPM instead of rpmtools. * tools/Makefile: use vendor_perl instead of site_perl (check of rpmtools.pm and packdrake.pm presence). 2002/07/10 Pixel * tools/Makefile: nicer use of vendor_perl instead of site_perl (check of rpmtools.pm and packdrake.pm presence) ... i had forgot to commit :-( * ftp.pm: don't let Timeout kill us * modparm.pm: rollback titi's modif * detect_devices.pm: cleanup * share/list: add integer.pm (needed by Time::Local (needed by Net::FTP)) 2002/07/10 Thierry Vignaud * drakxtools.spec: list and describe all gui tools from drakxtools enhance cohenrency: step 1 - ide and scsi devices use channel rather than bus to store their physical connection, which is more logic (at least for eide) - all devices have their connection bus in bus field, not in bus for {pci,usb,...} and interface_type for {scsi,eide,other_block_devices} - detect_devices:getIDE() : add eide_hds hash in order to be able to split info field between model and vendor - harddrake::ui : code reduction allowed by the above changes fix parrallel build fix perl depandancy on new perl * diskdrake/interactive.pm, detect_devices.pm, install_steps.pm, harddrake/ui.pm: enhance cohenrency: step 1 - ide and scsi devices use channel rather than bus to store their physical connection, which is more logic (at least for eide) - all devices have their connection bus in bus field, not in bus for {pci,usb,...} and interface_type for {scsi,eide,other_block_devices} - detect_devices:getIDE() : add eide_hds hash in order to be able to split info field between model and vendor - harddrake::ui : code reduction allowed by the above changes * modparm.pm: typo fix no need to test two times if modinfo is executable in normal (ie not in drakx) case ... * Makefile, Makefile.drakxtools: remove all (use\s+(diagnostics|vars|strict)' instances 2002/07/09 Pixel * Makefile: have MDK::Common's in TAGS * detect_devices.pm: rewrite getSCSI, now handling scanners * share/list: adapt to new perl 5.8.0 * common.pm, modparm.pm: move join_lines to common 2002/07/09 Pixel * Makefile: have MDK::Common's in TAGS * detect_devices.pm: rewrite getSCSI, now handling scanners * share/list: adapt to new perl 5.8.0 * common.pm, modparm.pm: move join_lines to common 2002/07/09 Thierry Vignaud * harddrake/TODO: fix boot freeze on hw change: initscript was running us with stdout redirected to /dev/null; just use a small sh wrapper to fix it update * standalone/service_harddrake.sh: - redirect stderr - remove old commented stuff fix boot freeze on hw change: initscript was running us with stdout redirected to /dev/null; just use a small sh wrapper to fix it * Makefile.drakxtools: fix boot freeze on hw change: initscript was running us with stdout redirected to /dev/null; just use a small sh wrapper to fix it * standalone/service_harddrake: - configurator got displayed - move timeout around configurator asking (still not 100% ok) time out after 200 seconds fix boot freeze on hw change: initscript was running us with stdout redirected to /dev/null; just use a small sh wrapper to fix it * drakxtools.spec: fix url add harddrake service wrapper really final changes final batch of changes for -3mdk ? fix boot freeze on hw change: initscript was running us with stdout redirected to /dev/null; just use a small sh wrapper to fix it * Makefile.config: add harddrake service wrapper to installed files * harddrake/ui.pm: - add channel: primary/slave for eide deivces - get rid of ->{set,get}_user_data ensure we don't mix scsi and pci devices * harddrake/bttv.pm: log only if options set typo fix only log explanations in standalone mode * share/po/Makefile: fake make so that its builtin rule to create file from file.sh doesn't nuke service_harddrake with it wrapper 2002/07/08 daouda * standalone/drakbug: - detect package automatically when app is chosen 2002/07/08 Pixel * Makefile: create the list_modules symlink make test_pms should now work (was pb with list_modules.pm) * install_steps.pm, any.pm: mtools config so that "mdir a:" accesses the usb floppy if one is there * diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind buttons) for the raid tab * install_steps_interactive.pm: in case the licence is refused, ask for confirmation * diskdrake/interactive.pm: make Clear_all work on a LVM VG make Clear_all remove partitions from raids 2002/07/08 Thierry Vignaud * harddrake/TODO: remove fixed stuff * Makefile.drakxtools: s/PHONY/.PHONY/ - simplifications - harddrake support is complete * drakxtools.spec: update fix post: add start argument service changes batch for 2mdk rpmlint fixes parrallel build 1.1.8-2mdk - enhance descriptions - various spec clean split-up between harddrake and harddrake-ui complete changelog - obsoletes/provides libdetect-lst, libdetect-lst-devel, detect, detect-lst - don't restart harddrake on install - some stuff moved into Makefile.drakxtools - fix harddrake menu entry - fix build * harddrake/data.pm: cache @devices so that hw probe is only done once * standalone/harddrake2: no need to 'use strict' in "binary" * standalone/service_harddrake: - only work on start - add "please wait" message - really don't cry when no previous config skip configuration on firt run skip hw classes without configurator (which'll have a configurator after porting updfstab) * harddrake/ui.pm: - rehide "run config tool" button when it has been displayed in another hw class don't display "run config tool" button if no configurator availlable - center the main window - remove drakx decorations mice: - s/nbuttons/Number of buttons/ - delete qw(MOUSETYPE XMOUSETYPE unsafe) don't delete info field in normal path - eide devices: split up info field into vendor and model fields - complete help hummm ... eide: 0->master, 1->slave :-( - remove save_report menu entry, this is done by service_harddrake - move $in declaration near where it's used eide hard disks : print master/slave for bus_location 2002/07/08 daouda * Makefile.config: - add drakbug * drakxtools.spec: - add dir recursively * standalone/drakbug: - detect package automatically when app is chosen - standalone app 2002/07/08 Guillaume Cottenceau * mdk-stage1/mount.c: small readability & size enhancement 2002/07/08 Pixel * install_steps_interactive.pm: in case the licence is refused, ask for confirmation help perl_checker * diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind buttons) for the raid tab * diskdrake/interactive.pm: make Clear_all work on a LVM VG make Clear_all remove partitions from raids * Makefile: create the list_modules symlink make test_pms should now work (was pb with list_modules.pm) 2002/07/08 Thierry Vignaud * harddrake/ui.pm: - remove save_report menu entry, this is done by service_harddrake - move $in declaration near where it's used eide hard disks : print master/slave for bus_location - remove dead stuff - comment some stuff minor simplication various cleanups: - move all harddrake modules to harddrake namespace - replace two use by require so that it's not done at compil time but at runtime - there was a missing $ in harddrake::ui.pm * harddrake/TODO: update todo list * install_steps_interactive.pm, standalone/draknet, harddrake/bttv.pm, standalone/harddrake2, standalone/service_harddrake, harddrake/data.pm: various cleanups: - move all harddrake modules to harddrake namespace - replace two use by require so that it's not done at compil time but at runtime - there was a missing $ in harddrake::ui.pm * drakxtools.spec: - some stuff moved into Makefile.drakxtools - fix harddrake menu entry - fix build fixes for missing files enhanced description * modules.pm: - s/snd-card/snd/ - make some code clearer * Makefile.drakxtools: - simplifications - harddrake support is complete * scanner.pm: this doesn't need either "#!/usr/bin/perl" nor "use lib qw(/usr/lib/libDrakX);" * standalone/drakxtv: - fix options handling - use "perl -w" - s/bttv/harddrake::bttv/ due to recent changes 2002/07/07 daouda * drakxtools.spec: - directory should exist before mv'ing things (mkdir %%buildroot%%_initrddir) 2002/07/07 Pixel * detect_devices.pm: smarter raidAutoStartRaidtab great new raidAutoStartRaidtab allowing to handle existing software raids even when RAID_AUTORUN is not supported by kernel (which is the case for us since md.o is a not builtin the kernel) * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing software raids even when RAID_AUTORUN is not supported by kernel (which is the case for us since md.o is a not builtin the kernel) * devices.pm: use c::total_sectors() instead of BLKGETSIZE * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and marked dirty on any actions that destroy the raid 2002/07/07 daouda * Makefile: - remove share/wizard.rc in DISTFILE * drakxtools.spec: - directory should exist before mv'ing things (mkdir %%buildroot%%_initrddir) - mv typo in %install section (titi sux) 2002/07/07 Pixel * detect_devices.pm: smarter raidAutoStartRaidtab great new raidAutoStartRaidtab allowing to handle existing software raids even when RAID_AUTORUN is not supported by kernel (which is the case for us since md.o is a not builtin the kernel) remove detect_devices::check (including the annoying log about no modules for the pci entry) * modules.pm: new "append_to_etc_modules" function remove detect_devices::check (including the annoying log about no modules for the pci entry) * fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing software raids even when RAID_AUTORUN is not supported by kernel (which is the case for us since md.o is a not builtin the kernel) * any.pm: small regexp cleanup * fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in favour of isThisFs('nfs', ...) * interactive_newt.pm: make the buttons work in all cases - workaround segfaults - ensure the perl values are set when calling the clicked_may_quit callback * devices.pm: use c::total_sectors() instead of BLKGETSIZE * diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and marked dirty on any actions that destroy the raid 2002/07/06 Pixel * any.pm (ask_users): the user name length must be <= 32 * diskdrake/interactive.pm (as suggested by Alexander Skwar) - in interactive::check_type, check if the package (like jfsprogs) is installed - use interactive::check_type where usefull - cleanup * Makefile.config: standalone/drakbug doesn't exist! (why did deush add it???) it is standalone/harddrake2, not standalone/harddrake (poor deush must be loosing his brain :p) * diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/ - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - remove unused wizard.rc (as suggested by Alexander Skwar) - in interactive::check_type, check if the package (like jfsprogs) is installed - use interactive::check_type where usefull - cleanup * fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie can't be used as mountpoints), dixit redhat (package_needed_for_partition_type): return the package needed for a partition type (check_type): cleanup * install_any.pm (setDefaultPackages): use fsedit::package_needed_for_partition_type to get things like jfsprogs * fs.pm: supermount now handles fs=auto, using it :) * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - remove unused wizard.rc 2002/07/06 Thierry Vignaud * Makefile.config: add the harddrake service which was missing * printer.pm: try to simplify * harddrake/ui.pm: simplify: use reverse - help system: - add an help entry in help menu; - begin to describe information fields - reformat license in about window - information frame (mostly fixing incoherency between various hw classes fields) - s/media type/media class/ - s/info/Hardware id/ - s/device/device file/ - split description into manufacturer/description - eide devices: - rename bus as bus_location - set interface_type as bus - scsi devices: - set bus to SCSI - set bus_location to bus:id fields - don't print pci subids when non set - remove fields that were already used above (vendor id subvendor subid pci_bus pci_device pci_function) - no need to return window after program exit - print usage if needed - embed hardware tree in a "detected hardware" frame - cleanups: - rename widget2 as frame - remove dead commented code * drakxtools.spec: add harddrake2 service * standalone/icons/harddrake2/webcam.png, standalone/icons/harddrake2/harddrake.png, standalone/icons/harddrake2/keyboard.png, standalone/icons/harddrake2/ide_hd.png, standalone/icons/harddrake2/cable.png, standalone/icons/harddrake2/video.png, standalone/icons/harddrake2/tape.png, standalone/icons/harddrake2/joystick.png, standalone/icons/harddrake2/harddisk.png, standalone/icons/harddrake2/usb.png, standalone/icons/harddrake2/memory.png, standalone/icons/harddrake2/hw_network.png, standalone/icons/harddrake2/scsi_hd.png, standalone/icons/harddrake2/unknown.png, standalone/icons/harddrake2/floppy.png, standalone/icons/harddrake2/hw_printer.png, standalone/icons/harddrake2/scanner.png, standalone/icons/harddrake2/cd.png, standalone/icons/harddrake2/isdn.png, standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/sound.png, standalone/icons/harddrake2/scsi.png, standalone/icons/harddrake2/cpu.png, standalone/icons/harddrake2/hw_mouse.png, standalone/icons/harddrake2/modem.png, standalone/icons/harddrake2/K7.png: add harddrake2 icons 2002/07/06 Pixel * any.pm (ask_users): the user name length must be <= 32 * commands.pm: adapt to new modprobe.pm * diskdrake/hd_gtk.pm: - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - remove unused wizard.rc (as suggested by Alexander Skwar) - in interactive::check_type, check if the package (like jfsprogs) is installed - use interactive::check_type where usefull - cleanup * diskdrake/interactive.pm (as suggested by Alexander Skwar) - in interactive::check_type, check if the package (like jfsprogs) is installed - use interactive::check_type where usefull - cleanup (Resize): resize2fs handles ext3 :) * install_any.pm (setDefaultPackages): use fsedit::package_needed_for_partition_type to get things like jfsprogs when merge_fstabs, handle in a different way mtab and fstab (or manualFstab) => this allows to force the type&options in manualFstab * fsedit.pm (package_needed_for_partition_type): return the package needed for a partition type (check_type): cleanup * docs/comparisons: various remarks about mandrake * partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned disks to install (but no way to create such beasts) * Makefile.config: standalone/drakbug doesn't exist! (why did deush add it???) it is standalone/harddrake2, not standalone/harddrake (poor deush must be loosing his brain :p) add harddrake pm's * partition_table.pm: Allows people having PVs on unpartitioned disks to install (but no way to create such beasts) cleanup * fs.pm: supermount now handles fs=auto, using it :) when merge_fstabs, handle in a different way mtab and fstab (or manualFstab) => this allows to force the type&options in manualFstab * Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX - remove unused wizard.rc 2002/07/06 Thierry Vignaud * standalone/lsnetdrake: simplify * Makefile: add harddrake to DISTFILES * printer.pm: try to simplify * harddrake/TODO: add bits regarding eide and scsi * standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes * harddrake/ui.pm: simplify: use reverse - help system: - add an help entry in help menu; - begin to describe information fields - reformat license in about window - information frame (mostly fixing incoherency between various hw classes fields) - s/media type/media class/ - s/info/Hardware id/ - s/device/device file/ - split description into manufacturer/description - eide devices: - rename bus as bus_location - set interface_type as bus - scsi devices: - set bus to SCSI - set bus_location to bus:id fields - don't print pci subids when non set - remove fields that were already used above (vendor id subvendor subid pci_bus pci_device pci_function) - no need to return window after program exit - print usage if needed - embed hardware tree in a "detected hardware" frame - cleanups: - rename widget2 as frame - remove dead commented code * harddrake/data.pm: add a configurator for sound * standalone/icons/harddrake2/cable.png, standalone/icons/harddrake2/tape.png, standalone/icons/harddrake2/usb.png, standalone/icons/harddrake2/hw_network.png, standalone/icons/harddrake2/unknown.png, standalone/icons/harddrake2/hw_printer.png, standalone/icons/harddrake2/scanner.png, standalone/icons/harddrake2/isdn.png, standalone/icons/harddrake2/cd.png, standalone/icons/harddrake2/scsi.png, standalone/icons/harddrake2/hw_mouse.png, standalone/icons/harddrake2/K7.png, standalone/icons/harddrake2/webcam.png, standalone/icons/harddrake2/harddrake.png, standalone/icons/harddrake2/keyboard.png, standalone/icons/harddrake2/ide_hd.png, standalone/icons/harddrake2/harddisk.png, standalone/icons/harddrake2/joystick.png, standalone/icons/harddrake2/video.png, standalone/icons/harddrake2/memory.png, standalone/icons/harddrake2/scsi_hd.png, standalone/icons/harddrake2/floppy.png, standalone/icons/harddrake2/sound.png, standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png, standalone/icons/harddrake2/modem.png: add harddrake2 icons 2002/07/05 daouda * Makefile.config: - add harddrake drakbug drakTermServ to STANDALONEPMS_ * drakxtools.spec: - snapshot - new entries: o harddrake2 : new hardware detection && configuration tool o drakbugreport: bug reporting tool a la Kde (not working!) o drakTermServ : configuration tool for diskless stations. 2002/07/05 Pixel * fs.pm (prepare_write_fstab): for supermount, have "none" as the device (cleaner, and more coherent with the "supermount" script (tx to FredC)) 2002/07/05 Thierry Vignaud * install_steps_interactive.pm: minimize startup: only load harddrake::bttv if the user click on "tv card" field in the hw summary window use harddrake::bttv to let people configure their tv card if it's misdetected * harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is a module) POSIX is no more used too. * harddrake/bttv.pm: remove device test: there're only two harddrake::bttv users, install_steps_interactive.pm and drakxtv which both have already tested that a bttv managed tv card is there. - add more tv cards - enable users to select number of buffers for mmap() - better description for pll setting - add tooltips help for some entries tv cards list: - split multi-cards entries - reverse the hash (needed since now bttv card types are not anymore unique) - complete the list from various sources - use a tree to display the list, it's clearer now since it's splitted by vendors - longer message - remove uneeded stuff for modules ("#!/..", "use lib..", "use standalone", ...) - simplify bttv options managment: - use if_, thanks MDK::Common - s/mapn/map by using a hash at first - s/mapn{if}/map{if_} - don't read/write modules.conf here, drakx take care of that for us thus, the test program became: #!/usr/bin/perl use strict; use lib qw(/usr/lib/libDrakX); use standalone; use bttv; use interactive; use modules; modules::read_conf; bttv::config('interactive'->vnew()); modules::write_conf; spec29: bttv configuration part of drakxtv. it can be used by: #!/usr/bin/perl use strict; use lib qw(/usr/lib/libDrakX); use standalone; use harddrake::bttv; use interactive; bttv::config('interactive'->vnew()); * drakxtools.spec: fix typo fix dirs1/dirs2 mismatch - M-q descriptions - simplify file lists building - we can use several -f on one "%%files" line * standalone/drakxtv: if we're root and there's a tv card managed by bttv, offer to configure bttv trough harddrake::bttv * tools/cvslog2changelog.pl: typo fix * harddrake/data.pm: remove uneeded "#!/.." and "use lib" 2002/07/05 Franois Pons * Makefile: - handle /lib/i686 case - replace Mandrake/RPMS with Mandrake/RPMS* 2002/07/05 Guillaume Cottenceau * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h, mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h, mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified sources) 2002/07/05 Pixel * mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use strict" do not look at the mar files anymore, only use kernel/modules.pl (and so list_modules.pm) * diskdrake/interactive.pm: handle comments in fstab * fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF the entry is for the same mountpoint AND the same device handle comments in fstab * share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require* gnupg, only suggest it very strongly :) * mdk-stage1/usb-resource/update-usb-ids.pl: - do not use mar files for the list of modules, use list_modules.pm via kernel/modules.pl instead - use read_pcitable to parse usbtable 2002/07/05 Thierry Vignaud vnew()); modules::write_conf; spec29: bttv configuration part of drakxtv. it can be used by: #!/usr/bin/perl use strict; use lib qw(/usr/lib/libDrakX); use standalone; use harddrake::bttv; use interactive; bttv::config('interactive'->vnew()); * Makefile: don't use sed when not needed * install_steps_interactive.pm: minimize startup: only load harddrake::bttv if the user click on "tv card" field in the hw summary window use harddrake::bttv to let people configure their tv card if it's misdetected * harddrake/data.pm: remove uneeded "#!/.." and "use lib" 2002/07/04 Pixel * install_steps_interactive.pm, install_steps_auto_install.pm, install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm, printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm, install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new modules.pm * c/stuff.xs.pm: adapt to new ldetect * modules.pm: reworked, cleaned: - the list of modules is moved to kernel/list_modules.pm (and a few functions too) - new "add_probeall" function (similar to "add_alias") -> used for scsi_hostadapter and usb-interface - "load_multi" removed in favour of "load" which is now more powerful - load_thiskind renamed load_category - get_that_type renamed probe_category - %modules::drivers dropped (handled for list_modules) still more cleanup to come * rescue/make_rescue_img: adapt to the move all.modules -> kernel/all.modules and all.kernels -> kernel/all.kernels * modparm.pm: rework, cleanup, simplify and make it work * install2: create symlink list_modules.pm in current directory for testing purpose * Makefile: when building the tar for drakxtools, handle specially list_modules.pm adapt to the move all.modules -> kernel/all.modules and all.kernels -> kernel/all.kernels * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel" containing: - all.modules all.kernels update_kernel - part of perl-install/modules.pm now in kernel/list_modules.pm and kernel/modules.pl - update_kernel cleaned (it doesn't mention module names anymore, it is now in kernel/modules.pl) - cleanup Makefile - mdk-stage1 doesn't depend on perl-install anymore (more precisely mdk-stage1/pci-resource/update-pci-ids.pl) * any.pm: reworked & cleaned the kernel modules part - adapt to new modules.pm - adapt to new modparm.pm - renamed setup_thiskind to load_category - renamed setup_thiskind_backend to load_category_no_message * share/po/Makefile: make the "clean" rule less verbose 2002/07/04 daouda * standalone/draknet: - don't display clear password 2002/07/04 fcrozat * share/rpmsrate: Fix GNOME2 packages Install urw-fonts when installing XFree 2002/07/04 Pablo Saratxaga * share/po/tr.po: updated Turkish file * share/po/fr.po: updated French file * lang.pm: Changed some languages to defautl to utf-8 removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left languages) 2002/07/04 Pixel * install_steps_interactive.pm, install_steps_auto_install.pm, install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm, printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm, install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new modules.pm * c/stuff.xs.pm: adapt to new ldetect * modules.pm: reworked, cleaned: - the list of modules is moved to kernel/list_modules.pm (and a few functions too) - new "add_probeall" function (similar to "add_alias") -> used for scsi_hostadapter and usb-interface - "load_multi" removed in favour of "load" which is now more powerful - load_thiskind renamed load_category - get_that_type renamed probe_category - %modules::drivers dropped (handled for list_modules) still more cleanup to come * getpkgs_deps, do_resize_fat: removed since unused * Makefile, rescue/make_rescue_img: adapt to the move all.modules -> kernel/all.modules and all.kernels -> kernel/all.kernels * modparm.pm: rework, cleanup, simplify and make it work * install2: create symlink list_modules.pm in current directory for testing purpose * mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel" containing: - all.modules all.kernels update_kernel - part of perl-install/modules.pm now in kernel/list_modules.pm and kernel/modules.pl - update_kernel cleaned (it doesn't mention module names anymore, it is now in kernel/modules.pl) - cleanup Makefile - mdk-stage1 doesn't depend on perl-install anymore (more precisely mdk-stage1/pci-resource/update-pci-ids.pl) * tools/specific_arch: simplified using MDK::Common * any.pm: reworked & cleaned the kernel modules part - adapt to new modules.pm - adapt to new modparm.pm - renamed setup_thiskind to load_category - renamed setup_thiskind_backend to load_category_no_message * share/po/Makefile: make the "clean" rule less verbose 2002/07/04 Thierry Vignaud * mdk-stage1/probing.c: fixed static definition when non static declaration (gcc limitation). added conditional code around network detection. 2002/07/03 Guillaume Cottenceau * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c, mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c, mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c, mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c, mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c, mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c, mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c, mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W 2002/07/02 daouda * my_gtk.pm: - fill a combo by default : gtkcombo_setpopdown_strings($combo_widget,@strings) 2002/07/02 gbeauchesne * c/smp.c: - TODO: Update ia64 check with /proc/pal/cpuX ? - TODO: Update x86_64 check when SMP machines are actually available - Conditionalize compilation of main() with TEST macro 2002/07/02 Pixel * network/smb.pm: try harder to find the full list of servers available, using "smbclient -L" to check the workgroup masters 2002/07/01 Pixel * diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point 2002/06/28 Pixel * diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: - add authentification in diskdrake --smb (esp. for windows NT) - use "credentials=" to put the passwords (ideas and investigations from Stew Benedict, integrated by Pixel, but need testing) Known bug: if you want to change the password when there are 2 entries in fstab using the same username=/password=, writing the credentials is done in random order, => you've got one chance in 2 that the password is changed :-( * fs.pm: - add authentification in diskdrake --smb (esp. for windows NT) - use "credentials=" to put the passwords (ideas and investigations from Stew Benedict, integrated by Pixel, but need testing) Known bug: if you want to change the password when there are 2 entries in fstab using the same username=/password=, writing the credentials is done in random order, => you've got one chance in 2 that the password is changed :-( handle spaces in mount points and devices (using \040) 2002/06/27 Stew Benedict * standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add drakTermServ application and icon. 2002/06/26 Pixel * install_steps.pm, install_steps_interactive.pm, install2.pm: ensure licence step is asked in any case (ie. even when selectLanguage is automatic) * any.pm: "my" variables where needed 2002/06/25 Pablo Saratxaga * share/po/tr.po, share/po/ar.po: Updated po files 2002/06/19 Frederic Lepied * Makefile: corrected rules to make distributable rpms. 2002/06/19 Franois Pons * patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP Mandrake Linux 8.2. 2002/06/19 Guillaume Cottenceau * modules.pm: remove a few drivers so that hd.img and network.img are possible with latest BOOT kernel 2002/06/19 Pixel * standalone/fileshareset: use "wide links = no" for exporting via samba (thanks to Jan Schfer) * fs.pm: mounting of ntfs after install really mount the partition (thanks to Buchan Milne) 2002/06/18 daouda * my_gtk.pm: - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets 2002/06/18 Frederic Lepied * Makefile.drakxtools: manage security subdir. * Makefile: added targets to build test and distribution rpms and srpms (localrpm, localsrpm, rpm, srpm). added security to the installed directories * pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec, apps.net_monitor: ripped from the srpm 2002/06/18 Pablo Saratxaga * share/po/hu.po: updated Hungarian file 2002/06/17 cbelisle * standalone/draksec: added server, user and network advanced options * any.pm: draksec: customize entries for each options (lists, checkboxes and text boxes) Added user,server and network advanced options * security/msec.pm: - Customize entries for each options (checkboxes, text boxes and lists) added network, server and user advanced options 2002/06/15 alus * share/po/pl.po: updates 2002/06/13 Pablo Saratxaga * lang.pm: Catalan doesn't have French fallback anymore * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/06/11 Pixel * fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by Philippe Coulon) 2002/06/10 cbelisle * standalone/draksec: Add an entry for the security user email * security/msec.pm: Initial commit * any.pm: Add security user email entry in draksec 2002/06/10 daouda * network/tools.pm: - choose country according to timezone. 2002/06/10 Guillaume Cottenceau * tools/syncrpms: english fix 2002/06/10 Pixel * c/stuff.xs.pm: s/class/class_/ for ldetect 0.4 2002/06/07 Guillaume Cottenceau * timezone.pm: remove duplicate entry in ntp_servers * interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from interactive_gtk to my_gtk between widgets creation and real stuff so that we can now call it with widgets places differently 2002/06/06 Pablo Saratxaga * share/po/tr.po: updated po file 2002/06/05 Pixel * bootloader.pm: adapt to new lilo 2002/06/05 Pixel * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs * bootloader.pm: adapt to new lilo 2002/06/05 Pixel * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs 2002/06/03 Guillaume Cottenceau * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm, install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english fixes thx to vincent meyer 2002/06/03 Pixel * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style instead of weird style with clearall unset & auto_allocate set 2002/05/29 alus * share/po/pl.po: little fixes 2002/05/28 Guillaume Cottenceau * interactive_gtk.pm: remove typo fix when it's not a fix :-) small typo remove typo (hopefully really a typo ;p) * any.pm: be a bit more polite 2002/05/27 Franois Pons * install2.pm: make sure patch is always read after defcfg to take precedance. 2002/05/27 Pixel * modules.pm: have usb-interface1 for ehci-hcd 2002/05/24 Guillaume Cottenceau * Xconfigurator.pm: dams fixes a bug in the install :-) 2002/05/21 Guillaume Cottenceau * share/rpmsrate: xtraceroute needs 3d 2002/05/15 alus * share/po/Changelog: info about polish translation 2002/05/14 alus * share/po/pl.po: polish finished updated polish translation polish updated to near finished. Fuzzy removed and checked 2002/05/14 Guillaume Cottenceau * docs/HACKING: libncurses* also for the sucking neuneux 2002/05/14 Pablo Saratxaga * share/po/pl.po, share/po/id.po: updated po file 2002/05/13 alus * share/po/pl.po: mostly finished polish translation.!! 2002/05/13 Guillaume Cottenceau * docs/HACKING: libbzip2* and more explanations about failing compilation * mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c: adapt to gcc-3.1 2002/05/02 Pablo Saratxaga * lang.pm: Put back xcin as default XIM for zh_TW.Big5 * share/po/eu.po: small corrections 2002/04/29 Guillaume Cottenceau * mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as well 2002/04/29 Pablo Saratxaga * share/po/wa.po, share/po/hu.po: updated po files 2002/04/26 Franois Pons * Xconfigurator.pm: fixed some machine with two present i830 CGC but only one in reality. * detect_devices.pm: updated usbMice to take care of device declared as Mouse:USB in usbtable (was not the case !) 2002/04/25 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/04/23 Guillaume Cottenceau * bootlook.pm: a few english fixes * any.pm: fixes english fixes from v meyer a few english fixes thx to vincent meyer 2002/04/19 alus * share/po/pl.po: It's only about 100 entries to the end 2002/04/19 Pablo Saratxaga * share/po/nl.po: updated Dutch file * share/po/hu.po: updated po file 2002/04/18 alus * share/po/pl.po: 3 more long messages one entry stil working.... 2002/04/17 alus * share/po/pl.po: Mostly finished polish translation translations, fixes etc... 2002/04/17 Franois Pons * tools/oem-prepare: final candidate. * rescue/tree/etc/oem: final candidate. add gcc-cpp to oem install. 2002/04/16 alus * share/po/pl.po: still working Few fixes Updated translation. Many strings is not yet translated... 2002/04/16 Franois Pons * rescue/tree/etc/oem: sync with oem-prepare fixed stupid error. forget packdrake module invocation. fixed to support non standard rpm filename. * tools/oem-prepare: add gcc-cpp to always installed. disable unselection of some package (gmc, all gcc3.0 stuff). 2002/04/16 Guillaume Cottenceau * share/rpmsrate: only main version of automake 2002/04/16 Pablo Saratxaga * share/po/nl.po: updated po file 2002/04/16 Pixel * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server dialog box 2002/04/15 Guillaume Cottenceau * share/rpmsrate: ipchains now conflicts with iptables 2002/04/15 Pablo Saratxaga * share/po/eu.po: Another small fix Small corrections 2002/04/13 Pablo Saratxaga * share/po/ro.po: merged with drakfloppy strings 2002/04/11 Pablo Saratxaga * share/po/mt.po: updated Maltese file 2002/04/10 Pablo Saratxaga * share/po/eu.po: small typo correction 2002/04/10 warly * share/rpmsrate: autofs -> 2 2002/04/09 Guillaume Cottenceau * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains and iptables packages conflict 2002/04/09 Pixel * partition_table_dos.pm, partition_table_gpt.pm, partition_table_empty.pm, partition_table_bsd.pm, partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic" error message (thanks to Brian J. Murrell) 2002/04/08 Guillaume Cottenceau * share/po/fr.po: fixed a bunch of things * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm, partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm, printerdrake.pm, network/tools.pm, diskdrake/interactive.pm, network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm, network/network.pm, printer.pm, interactive_stdio.pm: fix a few english strings 2002/04/08 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with drakfloppy strings 2002/04/07 Yves Duret * standalone/drakfloppy: moving from his own rpm to drakxtools * Makefile.config: add drakfloppy to STANDALONEPMS_ 2002/04/04 Guillaume Cottenceau * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt 2002/04/04 sdupont * standalone/drakbackup: please yduret, do not commit these changes on cvs before to test it. you can say "bugs fixes" only if you have corrected some errors but not if you create it! the backup on cd was disabled because the backend is not available for moment. * standalone/drakfont: remove uninteresting yduret changes, would it be possible to know what are your "bugs fixies" ? to yduret: I'm the creator of this program so please do not remove my changes. 2002/06/05 Pixel * fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs 2002/06/03 Guillaume Cottenceau * mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm, install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english fixes thx to vincent meyer 2002/06/03 Pixel * install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style instead of weird style with clearall unset & auto_allocate set 2002/05/29 alus * share/po/pl.po: little fixes 2002/05/28 Guillaume Cottenceau * interactive_gtk.pm: remove typo fix when it's not a fix :-) small typo remove typo (hopefully really a typo ;p) * any.pm: be a bit more polite 2002/05/27 Franois Pons * install2.pm: make sure patch is always read after defcfg to take precedance. 2002/05/27 Pixel * modules.pm: have usb-interface1 for ehci-hcd 2002/05/24 Guillaume Cottenceau * Xconfigurator.pm: dams fixes a bug in the install :-) 2002/05/21 Guillaume Cottenceau * share/rpmsrate: xtraceroute needs 3d 2002/05/15 alus * share/po/Changelog: info about polish translation 2002/05/14 alus * share/po/pl.po: polish finished updated polish translation polish updated to near finished. Fuzzy removed and checked 2002/05/14 Guillaume Cottenceau * docs/HACKING: libncurses* also for the sucking neuneux 2002/05/14 Pablo Saratxaga * share/po/pl.po, share/po/id.po: updated po file 2002/05/13 alus * share/po/pl.po: mostly finished polish translation.!! 2002/05/13 Guillaume Cottenceau * docs/HACKING: libbzip2* and more explanations about failing compilation * mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1 2002/05/02 Pablo Saratxaga * lang.pm: Put back xcin as default XIM for zh_TW.Big5 * share/po/eu.po: small corrections 2002/04/29 Pablo Saratxaga * share/po/wa.po, share/po/hu.po: updated po files 2002/04/26 Franois Pons * Xconfigurator.pm: fixed some machine with two present i830 CGC but only one in reality. * detect_devices.pm: updated usbMice to take care of device declared as Mouse:USB in usbtable (was not the case !) 2002/04/25 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/04/23 Guillaume Cottenceau * bootlook.pm: a few english fixes * any.pm: fixes english fixes from v meyer a few english fixes thx to vincent meyer 2002/04/19 alus * share/po/pl.po: It's only about 100 entries to the end 2002/04/19 Pablo Saratxaga * share/po/nl.po: updated Dutch file * share/po/hu.po: updated po file 2002/04/18 alus * share/po/pl.po: 3 more long messages one entry stil working.... 2002/04/17 alus * share/po/pl.po: Mostly finished polish translation translations, fixes etc... 2002/04/16 alus * share/po/pl.po: still working Few fixes Updated translation. Many strings is not yet translated... 2002/04/16 Guillaume Cottenceau * share/rpmsrate: only main version of automake 2002/04/16 Pablo Saratxaga * share/po/nl.po: updated po file 2002/04/16 Pixel * install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server dialog box 2002/04/15 Guillaume Cottenceau * share/rpmsrate: ipchains now conflicts with iptables 2002/04/15 Pablo Saratxaga * share/po/eu.po: Another small fix Small corrections 2002/04/13 Pablo Saratxaga * share/po/ro.po: merged with drakfloppy strings 2002/04/11 Pablo Saratxaga * share/po/mt.po: updated Maltese file 2002/04/10 Pablo Saratxaga * share/po/eu.po: small typo correction 2002/04/10 warly * share/rpmsrate: autofs -> 2 2002/04/09 Guillaume Cottenceau * standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains and iptables packages conflict 2002/04/09 Pixel * partition_table_dos.pm, partition_table_gpt.pm, partition_table_empty.pm, partition_table_bsd.pm, partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic" error message (thanks to Brian J. Murrell) 2002/04/08 Guillaume Cottenceau * share/po/fr.po: fixed a bunch of things * install_steps_interactive.pm, install_interactive.pm, network/isdn.pm, partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm, printerdrake.pm, network/tools.pm, diskdrake/interactive.pm, network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm, network/network.pm, printer.pm, interactive_stdio.pm: fix a few english strings 2002/04/08 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with drakfloppy strings 2002/04/07 Yves Duret * standalone/drakfloppy: moving from his own rpm to drakxtools * Makefile.config: add drakfloppy to STANDALONEPMS_ 2002/04/04 Guillaume Cottenceau * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt 2002/04/04 sdupont * standalone/drakbackup: please yduret, do not commit these changes on cvs before to test it. you can say "bugs fixes" only if you have corrected some errors but not if you create it! the backup on cd was disabled because the backend is not available for moment. * standalone/drakfont: remove uninteresting yduret changes, would it be possible to know what are your "bugs fixies" ? to yduret: I'm the creator of this program so please do not remove my changes. 2002/04/04 Guillaume Cottenceau * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt 2002/04/04 Guillaume Cottenceau * c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt 2002/04/03 Pixel * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which doesn't use $ENV{SECURE_LEVEL} anymore 2002/04/03 Pixel * install_steps.pm: setting /etc/sysconfig/msec for chkconfig which doesn't use $ENV{SECURE_LEVEL} anymore 2002/04/02 Pixel * bootloader.pm: do not have "root=" with no root (needed for memtest) (thanks to Borsenkow Andrej) * share/rpmsrate: add tmpwatch (since it is not mandatory any more) 2002/03/30 Yves Duret * standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up, more mdkish.. 2002/03/26 Till Kamppeter * printer.pm, printerdrake.pm: Fixed several problems related to HP multi-function devices: - Parallel multi-function devices worked only on the first (onboard) parallel port. - HP LaserJet 2200 needs HPOJ for printing via USB. - For the HP OfficeJet D series the scanning instructions were not shown. - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx. 2002/03/22 dam's * my_gtk.pm: cleaned gtkpowerpack 2002/03/21 Guillaume Cottenceau * install_any.pm: use /root rather than /tmp for some temp files (security suxx) 2002/03/20 Guillaume Cottenceau * rescue/list: rpm 4.0.4 * mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void 2002/03/20 sdupont * standalone/drakfont: fixing problems exchanging: ttmkfdir by /usr/X11R6/bin/mkttfdir which generate correct fonts.dir * standalone/drakbackup: remove backup on cd 2002/03/20 Thierry Vignaud * tools/updatehdlist: take care of commercial medium (not syncable). 2002/03/19 Thierry Vignaud * install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API 2002/03/18 Franois Pons * tools/oem-prepare: fixed to support rpm filename incoherent to standard naming for commercial packages (commercial are *really* shit (almost, for the hope) all the time ?) 2002/03/16 dam's * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet connection. 2002/03/16 Pablo Saratxaga * share/po/ko.po, share/po/ar.po: updated po file 2002/03/16 Pixel * network/ethernet.pm: small cleanup on untested code (need testing:) 2002/03/16 dam's * network/ethernet.pm: we now consider dhcp provide GATEWAY and internet connection. 2002/03/16 Pixel * network/ethernet.pm: small cleanup on untested code (need testing:) 2002/03/15 fabman * share/po/es.po: updated bad lilo/grub/yaboot translation updated spanish translations 2002/03/15 Franois Pons * bootloader.pm: force mkinitrd *really* for bootsplash. force initrd regeneration for oem on some case (maybe the cause of bootsplash perturbation, as maintainer don't even known why it is running correctly :-) * pkgs.pm: do not try to get synthesis if hdlist is available as an handle on file (typical for updates). * share/rpmsrate: remove doublon on NVIDIA_nforce. update to 6mdk for NVIDIA_nforce* 2002/03/15 Pixel * share/po/fr.po: yet again add some dropped entities from drakx-help.xml add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux; * install_steps_interactive.pm: - remove obsolete code - the result is to use directly $availableC instead $size2install which was min($availableC, $max_size) 2002/03/15 dam's * share/po/ja.po: reverted ' \n' from pablo because I managed to correct the way we wrap for the advertising * install_steps_gtk.pm: submitting widget instead of style (style/font initialization bug from gtk * my_gtk.pm: corrected get_text_coord : widget instead of style, and handling of ugly language (/ja|zh/) 2002/03/15 Franois Pons * pkgs.pm: do not try to get synthesis if hdlist is available as an handle on file (typical for updates). * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove @euro appended for 8.1). 2002/03/15 Pablo Saratxaga * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard ones 2002/03/15 Pixel * share/po/fr.po: yet again add some dropped entities from drakx-help.xml add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux; s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged) * keyboard.pm (unpack_keyboards): return undef on error 2002/03/15 dam's * share/po/ja.po: reverted ' \n' from pablo because I managed to correct the way we wrap for the advertising * install_steps_gtk.pm: submitting widget instead of style (style/font initialization bug from gtk * my_gtk.pm: corrected get_text_coord : widget instead of style, and handling of ugly language (/ja|zh/) 2002/03/15 Franois Pons * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove @euro appended for 8.1). 2002/03/15 Pablo Saratxaga * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard ones 2002/03/15 Pixel * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged) * keyboard.pm (unpack_keyboards): return undef on error 2002/03/15 dam's * share/po/ja.po: reverted ' \n' from pablo because I managed to correct the way we wrap for the advertising * install_steps_gtk.pm: submitting widget instead of style (style/font initialization bug from gtk * my_gtk.pm: corrected get_text_coord : widget instead of style, and handling of ugly language (/ja|zh/) 2002/03/15 Franois Pons * rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove @euro appended for 8.1). 2002/03/15 Pablo Saratxaga * keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard ones 2002/03/15 Pixel * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged) * keyboard.pm (unpack_keyboards): return undef on error 2002/03/14 Pablo Saratxaga * share/po/ja.po: updated po file 2002/03/14 Guillaume Cottenceau * standalone/drakxtv: english 2002/03/14 Pablo Saratxaga * share/po/hr.po, share/po/da.po, share/po/no.po: updated po files * share/po/eu.po: updated po file * lang.pm: changed LANGUAGE for basque * share/po/ja.po: added \n in advertising 2002/03/14 Pixel * share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good for english which has CHARSET"C", adding it * share/rpmsrate.server: obsolete 2002/03/14 Thierry Vignaud exit() out of scan4tvchannels() - add to TODO list the possibility to install xawtv if needed - check scantv return value and display an error message - also if the wrapper was runned on console, display a nice message saying one can now run xawtv under X11 2002/03/14 warly * share/rpmsrate: add commercial apps 2002/03/14 Yves Duret * standalone/logdrake: fix some bug fix * bug in field matching/ not matching 2002/03/13 dam's * share/logo-mandrake.png: new gfx 2002/03/13 Franois Pons * tools/oem-prepare: sync with oem (removed mach32 server). sync with oem. remove bzflag. synced with oem script. * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too. remove Mach8 and Mono driver for oem only. remove bzflag. fixed closure selection on sub groups (like 3D), moved some big package out of oem, minor fixes. 2002/03/13 dam's * share/logo-mandrake.png: new gfx 2002/03/13 Franois Pons * tools/oem-prepare: sync with oem (removed mach32 server). sync with oem. remove bzflag. synced with oem script. * rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too. remove Mach8 and Mono driver for oem only. remove bzflag. fixed closure selection on sub groups (like 3D), moved some big package out of oem, minor fixes. 2002/03/13 Pablo Saratxaga * share/po/cs.po, share/po/eu.po: updated po files 2002/03/13 warly * share/rpmsrate: add aspell-fr and en for gabber require 2002/03/13 Franois Pons * rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D), moved some big package out of oem, minor fixes. * tools/oem-prepare: synced with oem script. 2002/03/13 gbeauchesne * share/rpmsrate: - Add openoffice with weight = 2 2002/03/13 Pablo Saratxaga * share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po, share/po/eu.po: updated po files * lang.pm: small console font changes set default console fotns for latin1/0 to lat1-16 and lat0-16; the font lat0-sun16 is missing some chars of iso-8859-1/15 ! 2002/03/13 Pixel * pkgs.pm: add gcc and gcc-c++ in @preferred 2002/03/13 warly * share/rpmsrate: add aspell-fr and en for gabber require 2002/03/12 dam's * network/network.pm: onboot option only in expert mode corrected domainname bug; added onboot option 2002/03/12 dam's * standalone/drakbackup, standalone/drakfont: minor bug correction * standalone/net_monitor: greater timeout * network/tools.pm, network/netconnect.pm: changed timeout for testing internet connection 2002/03/12 Franois Pons * pkgs.pm: remove synthesis if not found (filesize is 0) * Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!) * install_any.pm: added fix to support update hdlist renaming (ie hdlist of update are always hdlist.cz). remove old synthesis file, to make sure gzip can build a new one. * share/rpmsrate: added nforce support (hack by adding kernel version inside) 2002/03/12 Pablo Saratxaga * share/po/da.po: updated Danish file * share/po/ga.po: fixed email address * share/po/zh_TW.po: updated po file 2002/03/12 Pixel * install_steps.pm, bootloader.pm: don't have "quiet" boot in the server meta_class * pkgs.pm: "fam" is not a naughtyServers remove the old "boa" comment adapt naughtyServers for 8.2 2002/03/11 Guillaume Cottenceau * share/po/fr.po: a few missing translations 2002/03/11 Pablo Saratxaga * share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po, share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po, share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated po files * share/po/eu.po, share/po/it.po: updated po files merged with new strings from manuals * share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals * share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po, share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po, share/po/cs.po, share/po/af.po: updated po files (finished merging with manual strings) updated po files * share/po/hu.po: updated po files updated po files * share/po/cy.po: updated po file updated po files * share/po/es.po: updated Spanish * share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po, share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po, share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging with manual strings) 2002/03/11 dam's * Makefile.config: added drakproxy * standalone/drakxtv: added embedded mode 2002/03/11 Franois Pons * install_steps_gtk.pm: for updates, make tree as flat instead in order to see all packages. 2002/03/11 Guillaume Cottenceau * share/rpmsrate: webmin: 3 * standalone/drakxtv: - install xawtv when necessary instead of telling people to use urpmi (titi sucks) - prints out a message when no tv card has been detected * share/po/fr.po: small ortograf 2002/03/11 Pablo Saratxaga * share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings from manuals * share/po/DrakX.pot: merged with new strings from manuals updated GErman file * share/po/de.po: updated GErman file * share/po/es.po: updated Spanish 2002/03/11 Pixel * mouse.pm (fullname2mouse): workaround when "1 Button" is not found * install_steps.pm, install2.pm: - default security level now set in miscellaneousBefore - default security level is 3 in meta_class server * install_any.pm: - fix the setting of compssUsersChoices in auto_install when it is empty - set the default compssUsersChoices adapted to the server meta_class * share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice, the rate is 4, and it requires apache, and ...) * Makefile: upload the various compssUsers* (esp. compssUsers.server) * install_steps_gtk.pm: - remove the hack for not displaying Utilities in classic meta_class - new compssUsers groups for the server meta_class * share/compssUsers: remove "Utilities" here instead of removing it hackily in install_steps_gtk * share/compssUsers.server: fix the path=Utilities for the Utilities section 2002/03/11 Till Kamppeter * printerdrake.pm: Small text fix. Security fix: Give a warning that SMB passwords can easily be revealed by normal users when printing on a Windows-hosted printer is set up. * detect_devices.pm: Reverted parts of the last change, they broke in non-DevFS environments (e. g. during installation). 2002/03/11 warly * share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server * share/compssUsers.server: remove ICEWM choice 2002/03/11 Yves Duret * tools/cvslog2changelog.pl: added yduret entry in user. 2002/03/11 Franois Pons * Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad card for XF3) (gg report). 2002/03/11 Pablo Saratxaga * help.pm: updated help file * share/po/de.po, share/po/DrakX.pot: updated GErman file 2002/03/11 Pixel * diskdrake/interactive.pm (Mount_point): when files exist in the chosen mount point, propose migration * install_steps_interactive.pm: search /commercial/i instead of /Application/ before showing the commercial license * standalone/drakboot, bootloader.pm: fix Stew sucks * install2.pm, install_steps.pm: - default security level now set in miscellaneousBefore - default security level is 3 in meta_class server * install_steps_gtk.pm: - remove the hack for not displaying Utilities in classic meta_class - new compssUsers groups for the server meta_class search /commercial/i instead of /Application/ before showing the commercial license * install_any.pm: - fix the setting of compssUsersChoices in auto_install when it is empty - set the default compssUsersChoices adapted to the server meta_class * Makefile: upload the various compssUsers* (esp. compssUsers.server) * share/compssUsers: remove "Utilities" here instead of removing it hackily in install_steps_gtk * share/compssUsers.server: fix the path=Utilities for the Utilities section 2002/03/11 yduret * standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check line. 2002/03/10 chipaux * share/po/fr.po: Corrected few typo mistakes. 2002/03/10 Guillaume Cottenceau * install_steps.pm: gcize damienization * share/rpmsrate: put userdrake together with drakconf so that userdrake is not missing (till) 2002/03/10 siegel * share/po/help_xml2pm.pl: added tag filename * any.pm: added missing i18n _() * share/po/de.po: update and still fixes ... updates update 2002/03/10 Till Kamppeter * printer.pm: Protect the Star Office/OpenOffice.org configuration against manual changing of the "update-alternatives" assignment of the "lpr" command. * detect_devices.pm: Made USB printer auto-detection more stable and reliable. 2002/03/10 yduret * standalone/scannerdrake: added ASK DEVICE support * scanner.pm: added ASK support for more interactiveness during configuration 2002/03/09 Guillaume Cottenceau * mdk-stage1/dhcp.c: comply better to ClientID stuff 2002/03/09 Pablo Saratxaga * share/po/sv.po: updated po file 2002/03/09 yduret * standalone/scannerdrake: added sum up at the end uncomment line that checks if sane rpm is installed or not (thx gc). i sux, 2002/03/08 dam's * standalone/drakproxy: drakproxy rewritten working drakproxy * install_steps.pm: corrected network up/down when network install * standalone/drakfont: ergonomy changed to fit in mcc corrected network up/down when network install * network/network.pm: proxy settings corrected 2002/03/08 fabman * share/po/es.po: updated spanish translation 2002/03/08 Franois Pons * install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming conventions. * standalone/XFdrake: fixed NVIDIA support to use newer kernel naming conventions. * Xconfigurator.pm: fixed possible additional XFree packages not installed if server is already installed. 2002/03/08 Guillaume Cottenceau * share/po/fr.po: missing translations + a few changes * mdk-stage1/probing.c: have 4 seconds of delay for usb stuff to show up rather than seconds 2002/03/08 Pablo Saratxaga * share/po/cs.po, share/po/it.po: updated po files * share/po/es.po: corrected typo * share/po/da.po: updated Danish file * lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in locales-skeleton so non primary chinese encodings can work * share/po/ar.po: updated po file * share/po/cy.po: removed the "translation" of licence, it was random text. 2002/03/07 dam's * share/po/fr.po, modparm.pm: corrected 2002/03/07 Guillaume Cottenceau * mdk-stage1/newt-frontend.c: english fix thx to till & phil 2002/03/07 Pablo Saratxaga * share/po/fr.po: updated po file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/03/07 Pixel * fs.pm: removing quota choices for reiserfs 2002/03/07 dam's * standalone/net_monitor: make gc happy * modparm.pm, share/po/fr.po: corrected * standalone/draknet: corrected network/internet restart when already connected * network/netconnect.pm: corrected bad previous behaviour * standalone/drakfont: corrected bad system command * share/advertising/02-internet_icon.png, share/advertising/05-contcenter_icon.png, share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl, share/advertising/08-games.pl, share/advertising/02-internet.pl, share/advertising/03-graphic_icon.png, share/advertising/07-server.pl, share/advertising/12-MDKstore_icon.png, share/advertising/06-user_icon.png, share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl, share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl, share/advertising/04-develop.pl, share/advertising/09-MDKcampus_icon.png, share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl, share/advertising/04-develop_icon.png, share/advertising/08-games_icon.png: changed icon sizes 2002/03/07 fcrozat * share/rpmsrate: Evolution is not dependent on GNOME selection (not require gnome-core) 2002/03/07 Franois Pons * install_steps.pm: avoid destroying some files in /etc. * install_steps_interactive.pm: fixed package tree with a given medium. * any.pm: fix autologin sometimes activated without user intervention. 2002/03/07 Guillaume Cottenceau * install_any.pm: generate_automatic_stage1_params: also save the interface number in case the machine will have several interfaces; clean code a bit * mdk-stage1/network.c: better error msg regarding pcmcia net adapters supported either with pcmcia.img or network.img (amaury sucks) * install_steps_auto_install.pm: in replay mode, since $o->{interactiveSteps} exists, we can't simply ||= @graphical_steps, we need to push to ensure that the @graphical_steps is always honoured * standalone/drakgw: - call net_monitor to disable internet connection before network-restart - user return value when status'ing the initscripts rather than grepping their text output * modules.pm: try to avoid segfaulting probeall stuff add ns83820 gigabit (goes to other.img) * rescue/rescue-doc: english fixes thx to phil 2002/03/07 Pablo Saratxaga * standalone/drakfont: Added a missing _( ) around a text * share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated po files * share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the translations using argument switching (not yet handled by DrakX) * bootlook.pm, standalone/drakboot: i18n changes * keyboard.pm: corrected the locale->keyboard list building make keyboard selection choose first the 5 first chars of lang; then the 2 first chars; * share/po/eu.po: commented out the translations using argument switching (not yet handled by DrakX) updated po file 2002/03/07 Pixel * any.pm: fix fileshare custom config fix *some* stew errors * bootloader.pm: "--timeout=" must be after terminal add --timeout=... for "terminal serial ..." line in grub's menu.lst fix *some* stew errors * install_any.pm: don't have the adsl & modem passwords in report.bug * detect_devices.pm (zips__faking_ide_scsi): fix returned value in standalone (getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel error when there is no floppy) * fs.pm: removing quota choices for reiserfs 2002/03/07 Stew Benedict * any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot functionality for PPC 2002/03/07 Till Kamppeter * printerdrake.pm: Fixed bug of network not being started by Printerdrake during installation. 2002/03/07 warly * share/compssUsers.server, share/compssUsers, share/rpmsrate: update server, merge with normal rpmsrate 2002/03/06 dam's * standalone/drakautoinst: corrected HASH and ARRAY label 2002/03/06 Pablo Saratxaga * share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file 2002/03/06 Pixel * standalone/fileshareset (nfs_exports::update_server): ensure portmap is running 2002/03/06 dam's * my_gtk.pm: corrected font stuff * standalone/drakautoinst: corrected HASH and ARRAY label 2002/03/06 Franois Pons * Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB. * pkgs.pm: fixed error when using multiple removable media and user aborted installation (for some other error) and hdlists cannot be retrieved. add save of synthesis too when partitions are reformated, so that urpmi is happy after. fixed when hdlist gives no new package (new name) but only obsoleted package or updated package, ie security updates may appreciate. * install_any.pm: update for newer pkgs module (fix for abort during installation). * rescue/tree/etc/oem: allow oem script to be executable from standard cd set (powerpack or other). 2002/03/06 Pablo Saratxaga * share/po/ja.po: updated po file updated pot file * share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po: updated pot file updated some po files * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2002/03/06 Pixel * pkgs.pm: add @preferred libxpm4 * lang.pm: fix typo in %xim (for chineese) - create the kde share/config's directory, so that kde config files are created in any case - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken into account when ~/.i18n doesn't exist (thanks to F.Crozat) * install_any.pm: ensure the fstab is kept on upgrade (g_auto_install): use "interactiveSteps" field instead of pushing in @install_steps_auto_install::graphical_steps * standalone/localedrake: when called by kcontrol with --apply, don't modify kde config files, kcontrol takes care of it more nicely * diskdrake/interactive.pm: translate the actions choose to activate crypto. type password. unselect encryption. Select encryption again, you were not asked for password. Fixed use formatError * bootloader.pm (add_append): don't add to entries of type 'other' * devices.pm (find_free_loop): fix * install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept on upgrade * fsedit.pm: do not allow encrypted /var 2002/03/06 Thierry Vignaud * mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool i82365 :-((, ugly patch 2002/03/05 warly * share/rpmsrate: add Fred Bastok modif remove too many duplicate in i18n packages that are now automatically added 2002/03/05 Chmouel Boudjnah * modules.pm: Add USB2 controller 2002/03/05 dam's * network/netconnect.pm: corrected expert option in install mode added expert mode * my_gtk.pm: greater interstice * modparm.pm: cosmetic gzipped modules handled 2002/03/05 fcrozat * share/rpmsrate: Install xlockmore when installing gnome, since xscreensaver can't lock root desktop.. 2002/03/05 Franois Pons * Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128 driver used. * install_steps.pm: added auto restore of some files (/etc/profile) needed by upgrade (from .rpmnew). added log for hasNetwork (so that we can understand why installUpdates do nothing). * crypto.pm: avoid trying to find hdlist-updates.cz in existing medium (instead of ftp one). * fs.pm: fixed hd install to allow using specific directory. * install_any.pm: fix duplicate synthesis.hdlist.xxx file present in /var/lib/urpmi, and furthermore uncompressed :-( fixed possible bug when generating synthesis file for urpmi installation. 2002/03/05 Guillaume Cottenceau * mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save dhcp_hostname for stage2 * install_any.pm: fix bug in generating automatic stage1 params for http * modules.pm: aironet core sucking thing 2002/03/05 Pablo Saratxaga * share/po/sr.po, share/po/sp.po: updated po files 2002/03/05 Pixel * install_steps.pm: if mem=nopentium is given on cmdline, have it after install * modules.pm (extract_modules): created (was done in load_raw) 2002/03/05 Stew Benedict * Xconfigurator.pm: use UseFBDev for r128 - PPC 2002/03/05 Till Kamppeter * printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet D series, HP LaserJet 33xx MFP. Fixed bug of printerdrake sometimes assuming the user has an MF device when he has typed the device file name in the expert mode. 2002/03/05 yduret * bootlook.pm: fix nobody bug * standalone/logdrake: mail alert: use eval {} to catch wizcancel 2002/03/04 dam's * modparm.pm: corected weirdness, I suck 2002/03/04 Franois Pons * pkgs.pm: fix scroll total to match reality. fixed interpretation of size of package when doing an install (this can be severe, need testing). 2002/03/03 Pablo Saratxaga * share/po/cy.po, share/po/id.po: updated po file 2002/03/03 Pixel * my_gtk.pm (gtkicons_labels_widget): since style is not set either, use the widget and ask it the style->font. This *works* (gtkicons_labels_widget): pass the style instead of directly passing the font 2002/03/03 Till Kamppeter * printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug in the PostScript produced by these programs so that the Euro symbol is printed correctly. 2002/03/02 Pablo Saratxaga * share/po/tr.po: updated po file 2002/03/02 Pixel * partition_table.pm: better name for windobe new 0x42 special id (their own LVM marker) * detect_devices.pm: better jaz detection (thanks to Randy Welch) 2002/03/02 Till Kamppeter * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org". 2002/03/02 Pablo Saratxaga * share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated po files * share/po/tr.po: updated po file 2002/03/02 Pixel * share/list: add lvreduce & lvextend * detect_devices.pm: fix ide zip name when there are already some other SCSI drives ZIPs and Jazz's are not floppies * diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and adjust_* for normal partitions, even for destructive resizes 2002/03/02 Till Kamppeter * printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org". 2002/03/01 Pixel * share/po/fr.po: fix gc's bulshit 2002/03/01 dam's * services.pm: corrected translation used for shell command * my_gtk.pm: style & font correction 2002/03/01 Franois Pons * share/rpmsrate: updated INSTALL category with NOCOPY new flag added. * rescue/tree/etc/oem: added ext3 support. * share/rpmsrate.server: synced with rpmsrate INSTALL category. * install_any.pm: reset correct setup_postinstall_rpms calling. removed some card where 3D is not installed by default: Riva128, Radeon 8500 and Rage Mobility card. removed staling debug code. fixed bad copied package (if one is not found). * tools/oem-prepare: added handling of newer rpmsrate format with INSTALL category. * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY handling. only copy package in INSTALL category with a rate of at least 2. 2002/03/01 Guillaume Cottenceau * share/po/fr.po: a few missing trads please translators, keep two newlines when there are two newlines in original string, it's on purpose 2002/03/01 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated po files * share/po/fr.po: fixed two typos small corrections (non breakable spaces) 2002/03/01 Pixel * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=> Xdrakres completly obsolete) * standalone/localedrake: restrict localedrake to installed lang * lang.pm: restrict localedrake to installed lang add 'C' in %charset2kde_font (so that english has normal fonts) * bootloader.pm: - do not indent "disk=... bios=..." - $lilo->{first_hd_device} can be used to tell which drive is the first one for the BIOS. Useful when the bootloader is installed on a partition and not on the MBR. read "disk=/dev/xxx bios=0x8x" and save it * any.pm: restrict localedrake to installed lang ask which hard drive is the booting one when there is mixed kind of drives (scsi+ide, ide2+ide) and the bootloader is not installed on MBR 2002/03/01 Till Kamppeter * printer.pm: Reduced the paths to search for Star/Open Office, on systems without these applications installed the search needed a significant time. 2002/03/01 Franois Pons * share/rpmsrate: updated INSTALL category with NOCOPY new flag added. * share/rpmsrate.server: synced with rpmsrate INSTALL category. * install_any.pm: removed staling debug code. fixed bad copied package (if one is not found). * pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY handling. only copy package in INSTALL category with a rate of at least 2. 2002/03/01 Guillaume Cottenceau * mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation, thx to david@eastcott.net * share/po/fr.po: please translators, keep two newlines when there are two newlines in original string, it's on purpose 2002/03/01 Pablo Saratxaga * share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files 2002/03/01 Pixel * Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=> Xdrakres completly obsolete) * detect_devices.pm: add is_a_recent_computer() * any.pm: call dcop as user * lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts) switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15 * bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it * mouse.pm: special case for non detected usb interface on a box with no mouse. we *must* find out if there really is no usb, otherwise the box may not be accessible via the keyboard (if the keyboard is USB) the only way to know this is to make a full pci probe 2002/02/28 dam's * standalone/drakbackup: bugfixs corrected translation for crontab * modparm.pm: corrected modinfo path for isa modules during install 2002/02/28 Franois Pons * Xconfigurator.pm: try to fix if no chosen width has been found. removed Radeon 8500 from DRI capable cards. * rescue/tree/etc/oem: added curl as a bonus for oem install (it will be used by urpmi) added a2ps as a bonus (it fetch tetex where oem limited disk usage do not agree a lot). fixed bad copy of install packages. * tools/oem-prepare: added curl as a bonus for oem install (it will be used by urpmi) added a2ps as a bonus (it fetch tetex where oem limited disk usage do not agree a lot). fixed bad copy of INSTALL packages. 2002/02/28 Guillaume Cottenceau * install2.pm: more precise msg when can't access kernel modules because we still have many dumb people on cooker asking what's going on * install_steps_interactive.pm: small english fix 2002/02/28 Pablo Saratxaga * share/po/de.po, share/po/no.po: updated po files updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file * share/po/sv.po: updated Swedish file updated pot file 2002/02/28 Pixel * rescue/make_rescue_img: resolve conflicts for short keytable names (eg: "no" could be either "no-dvorak" or "no-latin1") * keyboard.pm (loadkeys_files): ensure each file appear only once 2002/02/28 siegel * share/po/de.po: and another part of updates updates 2002/02/28 Thierry Vignaud * share/themes-marble3d.rc: rechanged bg for camille * standalone/drakbackup: corrected translation for crontab 2002/02/28 Franois Pons * rescue/tree/etc/oem: fixed bad copy of install packages. * tools/oem-prepare: fixed bad copy of INSTALL packages. * Xconfigurator.pm: removed Radeon 8500 from DRI capable cards. 2002/02/28 Guillaume Cottenceau * rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are so dumb 2002/02/28 Pablo Saratxaga * share/po/zh_TW.po: updated Chinese file 2002/02/28 Pixel * rescue/make_rescue_img: resolve conflicts for short keytable names (eg: "no" could be either "no-dvorak" or "no-latin1") * keyboard.pm (loadkeys_files): ensure each file appear only once * bootloader.pm: add "nowarn" in lilo.conf * install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs and for "diskdrake --nfs" 2002/02/28 sdupont * standalone/drakfont: including 'su' mode on drakfont. 2002/02/28 siegel * share/po/de.po: updated missing strings 2002/02/28 Till Kamppeter * printerdrake.pm: Re-activated function to specify a CUPS server in another network and to switch to manual CUPS configuration. - Fixes/Improvements on Star Office/Open Office support: o When one switches the spooler, the entries of the printers under the old spooler are removed from Star Office/Open Office o Printers on remote CUPS servers (which are known through broadcasting) can be added to Star Office/Open Office * share/rpmsrate.server, share/rpmsrate: Added "curl" to install section, it is needed by printerdrake. * printer.pm: - Fixes/Improvements on Star Office/Open Office support: o When one switches the spooler, the entries of the printers under the old spooler are removed from Star Office/Open Office o Printers on remote CUPS servers (which are known through broadcasting) can be added to Star Office/Open Office 2002/02/27 Pablo Saratxaga * share/po/eu.po: updated Basque file 2002/02/27 Till Kamppeter * printerdrake.pm: - Improved fully automatic adding of printer queue: o Ask for a queue name if more than one printer is detected o Let user confirm the model automatically chosen from the database o Set correct paper size according to the language/country - When one chooses a "CUPS + GIMP-Print" driver now all important options are displayed directly (without needing "Advanced" button). - Made less warning appearing on the console from where "printerdrake" was called. 2002/02/27 fabman * share/po/es.po: converted to UTF-8 2002/02/27 Franois Pons * crypto.pm: fix missing version listed when doing update. 2002/02/27 Guillaume Cottenceau * share/po/fr.po: a few translations * mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386, rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue * install_steps_interactive.pm: formatAlaTex for congratz msg xfs + bootdisk = warning_msg * share/rpmsrate: flightgear is now fully lowercase glaxium * mdk-stage1/pcmcia_/probe.c: add Keld Jrn Simonsen 's O2 Micro CardBus controller, and two other PCI entries which have close descriptions * mdk-stage1/pcmcia_/merge_from_pcitable: misc also report when pcitable is "too old" write a short perl program to easily merge new cardbus controllers from pcitable into probe.c 2002/02/27 Pablo Saratxaga * share/po/eu.po: updated po file 2002/02/27 Pixel * share/rpmsrate: simplify pyDict * install_steps_interactive.pm: ensure a keyboard is only once available, either in advanced or normal, but not in both (tx2fredl) * share/po/da.po: - it is UTF-8 - fix line splitting * lang.pm: workaround iso-8859-1 charset based languages not displayed correctly at install - %lang2country is the authority, so if the country given by %lang2country doesn't exist in KDE, return C - fix be,sp,sr - s/def/default/ (typo) - add some utf kde fonts 2002/02/27 Thierry Vignaud * modparm.pm: corrected bad sprintf 2002/02/26 fabman * share/po/es.po: updated spanish translations 2002/02/26 Guillaume Cottenceau * mdk-stage1/Makefile: version 8.2 2002/02/26 Pablo Saratxaga * share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files 2002/02/26 Pixel * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm, diskdrake/interactive.pm: propose some mount points for removable/nfs/smb * install_steps_interactive.pm: if no sound card are detected AND the user selected things needing a sound card, propose a special case for ISA cards * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes when asked for a ISA sound card) * my_gtk.pm (@icon_paths): ease testing 2002/02/26 siegel * share/po/de.po: updates 2002/02/26 dam's * standalone/drakfont: corrected ttf/TTF and xfs restart * share/logo-mandrake.png: new logo 2002/02/26 fabman * share/po/es.po: updated spanish translations 2002/02/26 Franois Pons * Xconfigurator.pm: fix translation of test program. 2002/02/26 Guillaume Cottenceau * mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL) * share/po/fr.po: - explain where to put nbsp spaces, explain what's nbsp spaces, explain how to compose them - add a few missing nbsp spaces - translate a few more things 2002/02/26 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file * any.pm: fixed English typo 2002/02/26 Pixel * diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm, diskdrake/interactive.pm: propose some mount points for removable/nfs/smb * Xconfigurator.pm: make perl_checker happy have "Ok More Show all" instead of "Ok Cancel Show all" set the locale properly instead of setting the translated messages in the script * any.pm: - zips() now return devices ending with "4", raw_zips() is the old zips() - rdvd handling - add .conf for /etc/devfs/conf.d/ files (devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the symlink in lib/dev-state * share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes when asked for a ISA sound card) add xine in VIDEO 4 * install_steps.pm: - zips() now return devices ending with "4", raw_zips() is the old zips() - rdvd handling - add .conf for /etc/devfs/conf.d/ files don't add mem=nopentium anymore. kernel people says it's not needed and bad for performance. It also means any bug must be addressed to them create /dev/dvd for DVDs * my_gtk.pm (@icon_paths): ease testing * lang.pm: create bindtextdomain which does only part of the load_mo job * install_steps_interactive.pm: if no sound card are detected AND the user selected things needing a sound card, propose a special case for ISA cards * detect_devices.pm: - zips() now return devices ending with "4", raw_zips() is the old zips() - rdvd handling - add .conf for /etc/devfs/conf.d/ files cleanup * fs.pm: - zips() now return devices ending with "4", raw_zips() is the old zips() - rdvd handling - add .conf for /etc/devfs/conf.d/ files 2002/02/26 Stew Benedict * Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than 1152x864 2002/02/26 Thierry Vignaud 1" - use interactive_gtk to determine if we're runned under X11 (ie authorized acces to X11 server, X11 context, ...) - add a note to remember that we should add a method to detect if we run under X11 if/when we implement interactive_qt - simplify code : * remove is_tv and simplify its code to be a one-liner (replace a foreach by a scalar context) * use format to prevent reverse lookup on scantv run thus enabling to reverse the initial hash table - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real hw. 2002/02/26 Pablo Saratxaga * share/po/hu.po: updated po file 2002/02/26 Pixel * install_any.pm: remove passwords and realnames from report.bug 2002/02/26 Pablo Saratxaga * share/po/hu.po: updated po file 2002/02/26 Pixel * install_any.pm: remove passwords and realnames from report.bug 2002/02/25 dam's * any.pm, modparm.pm: corrected modules parameters functions * standalone/drakfont: debug 2002/02/25 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or nasty pixel displayed using syslinux-1.67-3mdk 2002/02/25 Guillaume Cottenceau * share/po/fr.po: don't put accents for bootloader, we can just use 7bit chars (titi sucks bigtime) add a few nbsp spaces * rescue/list: add mt-st DAT stuff for joeghi (ghibo) 2002/02/25 Pablo Saratxaga * share/po/da.po: updated Danish file 2002/02/25 Pixel * bootloader.pm: ignore-table is a global flag, so put it there (when needed) * standalone/drakboot: add --testing * modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for ide zips * install_steps_interactive.pm: sort the list of keyboards 2002/02/25 Thierry Vignaud * share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po, share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po, share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po, share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po, share/po/eu.po: updated some po files 2002/02/24 Pixel * share/keyboards.tar.bz2: fix permission 2002/02/23 Pablo Saratxaga * share/po/cy.po, share/po/Makefile: updated Welsh file * share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po, share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file * install_steps_interactive.pm: removed useless _( ) around a string displayed in English only * share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po, share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po, share/po/af.po: updated some po files 2002/02/23 Pixel * interactive_newt.pm: - use simplify_string to ensure multi-line and too long strings are not used (hacky, but no other solution) - set $::setstep like interactive_gtk is doing (??) * partition_table_empty.pm: handle MBR containing the same character (0 or "l") * diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a nicer newt version) * devices.pm (devices::make): following a good advice from Andrej Borsenkow, return the file even if the device file doesn't exist the caller will fail or not. The advantage is better compatibility than raising an exception devices::make doesn't mknod with devfs * detect_devices.pm: no need to catch the exception from devices::make anymore devices::make doesn't mknod with devfs * fs.pm: nicer error message when mount fails * share/rpmsrate: adding gphoto2 * install_steps_interactive.pm: when passwords do not match, focus on first password entry, not the second (thanks to garrick) * Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since it's already handled in Xconfigurator.pm * my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps (thanks to garrick) * modules.pm: remove "-f" option for insmod 2002/02/23 siegel * share/po/de.po: fixed silly error updates 2002/02/23 Till Kamppeter * printer.pm, printerdrake.pm: Added automatic configuration of printers in Star Office and Open Office. 2002/02/22 dam's * share/advertising/02-internet.pl, share/advertising/07-server.pl, share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl, share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl, share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl, share/advertising/08-games.pl: corrected advertising text * share/po/fr.po: corrected bad translation * my_gtk.pm: corrected icon paths 2002/02/22 Guillaume Cottenceau * standalone/drakgw: exit the pur_gtk version after launching the wizard version * any.pm: better rephrasing change name and description of security levels * share/rpmsrate: powermanga: 2 -> 3 2002/02/22 Pablo Saratxaga * share/po/da.po, share/po/DrakX.pot: updated Danish file * lang.pm: start of support of kde fonts fixed some keyboard names * keyboard.pm: fixed some keyboard names added the two ?win_toggle choices some info useful for keyboard handling * share/keyboards.tar.bz2: fixed some keyboard names * share/po/hu.po: updated hungarian file 2002/02/22 Pixel * pkgs.pm: even smarted process to kill selection * lang.pm: fix 2 entries in charset2kde_font - remove non needed entries in lang2country - fix syntax errors - rename kdefont in charset2kde_font - much cleanup use invalid instead of unknown for errors when checking put back the less deep langs have the tree less deep (esp. nicer when not displaying UTF-8 entries) not translating in console installs (esp. newt) when the font is missing restrict the langs displayed to non utf8 during install fix warning message disable perl warnings when checking make perl_checker happy * devices.pm: add atibm (thanks to Robin Pollard) * bootloader.pm: put ignore-table to disable lilo's partition table checking (esp. the checking of the CHS geometry vs linear geometry) * Xconfigurator_consts.pm: fix syntax typo * Makefile: - exclude urpm from perl_checker - add checking keyboard.pm * install_steps_interactive.pm, install2.pm, install_steps.pm: not translating in console installs (esp. newt) when the font is missing * keyboard.pm: use invalid instead of unknown for errors when checking change the message disable perl warnings when checking - add checks for the various data structures - fix another typo for usb2drakxkbd fix typo * share/rpmsrate: add procmail in SYSTEM 4 add samba-doc samba-winbind samba-swat * Xconfigurator.pm: workaround set_active failing * any.pm: use the setupBootloader help instead of setupBootloaderGeneral restrict the langs displayed to non utf8 during install 2002/02/22 Thierry Vignaud * standalone/drakxtv: update TODO list; explain what is HRC * share/po/fr.po: further translations update french translation 2002/02/21 dam's * my_gtk.pm: corrected icon list 2002/02/21 fabman * share/po/es.po: updated spanish po file 2002/02/21 Guillaume Cottenceau * share/rpmsrate: spacecup no more exists armagetron is nice, no use to install gltron as well autoconf2.5 and automake1.5 * interactive.pm: when not in X and needs su, use consolehelper now use consolehelper when no "kdeinit: kwin" process is running 2002/02/21 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/21 Pixel * lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed at the same time * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are getFile'd (cuz they are big, causing the .cz2 to be *big*) * share/rpmsrate: add kinput2-wnn4 2002/02/21 siegel * share/po/de.po: update 2002/02/21 Till Kamppeter * printerdrake.pm: Removed "Manual configuration" button when "Local Printer" dialog is started from the queue modification menu (Recommended mode). Improved matching of printer names resulting from auto-detection with names in the database. 2002/02/21 Thierry Vignaud * share/po/fr.po: final batch of typos fixes (next time, please run a check speller) fix more typos update french translation; fix typos * diskdrake/interactive.pm: shorter displayed message 2002/02/21 dam's * standalone/draknet: changed button label * standalone/icons/gmon.png, standalone/icons/categ.png, standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png, standalone/icons/net_c.png, standalone/icons/ic82-system-40.png, standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png, standalone/icons/ic82-back-up-16.png, standalone/icons/wiz_scannerdrake.png, standalone/icons/ic82-discdurwhat-40.png, standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png, standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png, standalone/icons/hori.png, standalone/icons/wiz_draknet.png, standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png, standalone/icons/wiz_default_up.png, standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png, standalone/icons/ic82-systemeplus-40.png, standalone/icons/ic82-back-up-48.png, standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png, standalone/icons/ic82-moreoption-40.png, standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png, standalone/icons/wiz_printerdrake.png, standalone/icons/wiz_default_left.png, standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png, standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png, standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png, standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png, standalone/icons/ic82-where-40.png: added new gfx only standalone * pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png, pixmaps/ic82-system-40.png, pixmaps/net_c.png, pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png, pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png, pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png, pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png, pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png, pixmaps/gmon.png, pixmaps/drakbackup.540x57.png, pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png, pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png, pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png, pixmaps/wiz_draknet.png, pixmaps/net_d.png, pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png, pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png, pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png, pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png, pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png, pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png, pixmaps/wiz_scannerdrake.png: removed gfx not used during install 2002/02/21 Franois Pons * crypto.pm: fixed another not seen 8.1 reference in label. fixed 8.1 release hard coded. 2002/02/21 Pablo Saratxaga * share/po/fi.po: updated pot file updated Finnish file * help.pm: updated help file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/21 Pixel * share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc, install_gtk.pm, share/themes/DarkMarble-button3_out.png, share/themes.rc, share/themes/blueHeart-brown_bg1.png, share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc, share/themes/DarkMarble-check_on.png, share/themes/blueHeart-button1.png, share/themes/DarkMarble-check_off.png, share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png, share/themes/DarkMarble-button3_in_prelight.png, share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and blueHeart themes * bootloader.pm: have devfs=nomount for failsafe * Makefile.config, share/po/Makefile: make a difference between PMS and ALLPMS. For install, only use PMS * lvm.pm: ensure lvm tools don't need to be all installed at the same time * Makefile: template.in stuff removed make a difference between PMS and ALLPMS. For install, only use PMS * pkgs.pm: smarter choosing of processes to kill * tools/i386/netboot/make_boot_network: cleanup * modules.pm: add aic7xxx_old * install_any.pm: ensure lvm tools don't need to be all installed at the same time (remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs DarkMarble theme is removed (kdeicons_postinstall): remove this obsolete code no special case for installing imwheel * lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are getFile'd (cuz they are big, causing the .cz2 to be *big*) * network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs comment 2002/02/21 siegel * share/po/de.po: update snapshot 2002/02/21 Till Kamppeter * printerdrake.pm: Added "type => 'list'" to the printer modification menu, it appeared as a drop-down list during the installation. 2002/02/21 Thierry Vignaud * standalone/drakxtv: more translatable strings; hide scantv output on console; check that we're under X11 before running scantv in an xterm 2002/02/20 Guillaume Cottenceau * mdk-stage1/doc/UPDATEMODULES: add an example on modules with options first line comment no more necessary s/row/column/, silly me * standalone.pm: explanations stuff: no reason to use "updated" at a place when we use "modified" at the rest of the locations.. 2002/02/20 Pablo Saratxaga * share/po/es.po: updated Spanish file updated Spanish file 2002/02/20 Pixel * install_any.pm (ejectCdrom): display "files still open:" for all processes when umounting fail * pkgs.pm: much simpler & stronger killing of still running processes * mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry 2002/02/20 dam's * share/themes-marble3d.rc: updated theme * network/adsl.pm: mgmt install corrected 2002/02/20 daouda * share/rpmsrate: - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS NETWORKING_REMOTE_ACCESS_SERVER 2002/02/20 fcrozat * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla 2002/02/20 Franois Pons * rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of DrakX and newer method to select INSTALL packages. * standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using urpm library instead of parsing (now removed) depslist.ordered file. * Xconfigurator.pm: fixed default value if selecting a card (use previous one or existing one). added XFree 4 driver choice if Other|Unlisted is chosen. fixed cancel on card selection so that previous choice is not lost. * Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for listing XFree 4 drivers. 2002/02/20 gbeauchesne * share/rpmsrate: - Add gcc3.0-c++ and libstdc++3.0-devel - Prefer gcc3.0-java over gcc-java - Remove BasiliskII-sheepnet since it does no longer exist - Add/prefer BasiliskII-jit over BasiliskII 2002/02/20 Pablo Saratxaga * share/po/fr.po: updated FRench file * share/po/es.po: updated Spanish file updated Spanish file updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/20 Pixel * share/po/fr.po: fix s/SILO/LILO/ * fsedit.pm: have "with /usr" translated * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel" button * steps.pm: move installUpdates after configureX (workaround for bad timeouts during installing updates) * install_steps.pm, any.pm, standalone/draksec: factorize and update the reading of previous security level 2002/02/20 siegel * share/po/de.po: update 2002/02/20 Thierry Vignaud * share/po/fr.po: update french translations 2002/02/20 dam's * share/advertising/13-Nvert.pl: changed toll free * my_gtk.pm: added mcc kill if wait message * standalone/logdrake: cosmetic change, mcc compliance 2002/02/20 daouda * share/rpmsrate: - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS NETWORKING_REMOTE_ACCESS_SERVER 2002/02/20 fcrozat * share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla 2002/02/20 Franois Pons * pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying file when changing cd (was an limitation in read_rpmsrate when a package having a category and INSTALL caused INSTALL to be dropped). 2002/02/20 gbeauchesne * share/rpmsrate: - Add gcc3.0-c++ and libstdc++3.0-devel - Prefer gcc3.0-java over gcc-java - Remove BasiliskII-sheepnet since it does no longer exist - Add/prefer BasiliskII-jit over BasiliskII 2002/02/20 Pablo Saratxaga * share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved English strings * share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and Spanish files 2002/02/20 Pixel * install_any.pm: remove fsck_option (obsolete) * share/po/fr.po: fix s/SILO/LILO/ * fsedit.pm: have "with /usr" translated * install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel" button * steps.pm: move installUpdates after configureX (workaround for bad timeouts during installing updates) * install_steps.pm, any.pm, standalone/draksec: factorize and update the reading of previous security level 2002/02/20 siegel * share/po/de.po: snapshot 2002/02/19 dam's * share/advertising/Makefile: new Makefile to install ads 2002/02/19 fcrozat * share/rpmsrate: -Install gnome-vfs-extras when installing nautilus (to get samba browsing) -don't install nautilus-mozilla, it is pulled by nautilus 2002/02/19 Guillaume Cottenceau * any.pm: english fix 2002/02/19 Pixel * share/advertising/Makefile: advertising installation cleanup * diskdrake/smbnfs_gtk.pm: ugly hack to fix die 2002/02/19 siegel * share/po/de.po: updates for beta 3 2002/02/19 Till Kamppeter * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" dialog. 2002/02/19 dam's * share/advertising/Makefile: new Makefile to install ads 2002/02/19 Guillaume Cottenceau * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add $prefix in front of /var/* when missing since we give "lilo.conf" in drakbug_report, let's also give "menu.lst" 2002/02/19 Pixel * share/advertising/Makefile: advertising installation cleanup 2002/02/19 siegel * share/po/de.po: updates for beta 3 2002/02/19 Till Kamppeter * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" dialog. 2002/02/19 dam's * network/netconnect.pm: setting help * share/advertising/10-MDKexpert.png, share/advertising/07-server.png, share/advertising/05-contcenter.png, share/advertising/03-graphic.png, share/advertising/12-MDKstore_icon.png, share/advertising/06-user_icon.png, share/advertising/04-develop_icon.png, share/advertising/12-MDKstore.png, share/advertising/00-thanks.png, share/advertising/06-user.png, share/advertising/02-internet_icon.png, share/advertising/04-develop.png, share/advertising/05-contcenter_icon.png, share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png, share/advertising/11-consul.png, share/advertising/03-graphic_icon.png, share/advertising/02-internet.png, share/advertising/07-server_icon.png, share/advertising/01-gnu.png, share/advertising/08-games.png, share/advertising/09-MDKcampus.png, share/advertising/09-MDKcampus_icon.png, share/advertising/08-games_icon.png: re-adding with -kb removing for re-adding with -kb added advertising for translation * share/advertising/essi.p: blah added advertising for translation * my_gtk.pm: new icon handler * Makefile.config: addde share/advertising/*.pl for translation * share/advertising/Makefile: new Makefile to install ads * share/advertising/00-thanks.pl, share/advertising/06-user.pl, share/advertising/08-games.pl, share/advertising/list, share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl, share/advertising/11-consul.pl, share/advertising/13-Nvert.pl, share/advertising/02-internet.pl, share/advertising/07-server.pl, share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl, share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl: added advertising for translation 2002/02/19 Guillaume Cottenceau * any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add $prefix in front of /var/* when missing since we give "lilo.conf" in drakbug_report, let's also give "menu.lst" 2002/02/19 Pablo Saratxaga * share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files 2002/02/19 Pixel * share/advertising/Makefile: advertising installation cleanup * install2.pm: anchor the -IP match at the end of the string move loading /tmp/network from stage1 before doing the auto_install stuff to allow the -IP feature on auto_install file name * share/rpmsrate: add grub in 4 SYSTEM 2002/02/19 Till Kamppeter * standalone/printerdrake, printer.pm: Assured that the default page size is "Letter" for US/Canada and "A4" for the rest of the world. The "Description" field of a printer queue is filled in with printer manufacturer and model by default. Removed unused varaiables in /usr/sbin/printerdrake. * printerdrake.pm: Changed button texts of "Do you want to auto-detect?" dialog. Assured that the default page size is "Letter" for US/Canada and "A4" for the rest of the world. The "Description" field of a printer queue is filled in with printer manufacturer and model by default. Removed unused varaiables in /usr/sbin/printerdrake. * install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and "Letter" so that Foomatic recognizes the paper sizes. Also use "Letter" paper for "en_CA" and "fr_CA" locales. 2002/02/18 Guillaume Cottenceau * mdk-stage1/network.c: when no net device found, print a msg to tell that now most pcmcia network adapters are supported with network.img 2002/02/18 Pablo Saratxaga * help.pm: updated help file * share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po, share/po/zh_TW.po, share/po/it.po: updated pot file 2002/02/18 Pixel * lang.pm, standalone/localedrake: - handle --kde_lang with optionally --kde_country - handle --apply * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class" 2002/02/18 dam's * share/logo-mandrake.png: new gfx 2002/02/18 fcrozat * share/rpmsrate: Install Guppi when installing gnumeric 2002/02/18 Guillaume Cottenceau * share/po/fr.po: titi sucks again 2002/02/18 Pablo Saratxaga * share/po/sk.po: updated Slovak ile updated pot file * help.pm: updated help file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/18 Pixel * detect_devices.pm: - remove media_type cdrom-burner, use {capacity} instead - use /proc/sys/dev/cdrom/info to fill in the {capacity} * diskdrake/smbnfs_gtk.pm: - add Cancel - move "click here" in "Search servers" on the right side - remove Export - fix bug * share/rpmsrate: raise xsane in SCANNER (Yves Duret) raise mkisofs & cdrecord in BURNER * Xconfigurator.pm: workaround not having the right to connect to our new created test server. info about the pb (sorry for the french): quand on lance le serveur - via xdm/kdm/startx, ca utilise xauth, xhost est ferm - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilis *sauf* si X/xinit est lanc partir d'un X *et* .Xauthority est non vide. dans ce cas, xhost est ferm, et aucun xauth n'est ajout une consquence, c'est que XFdrake ne peut pas accder au X de test si XFdrake est lanc sous X ou "xauth list" est non vide exception: quand on lance le xdm/kdm en root, xhost n'est pas ferm, pas contre il est ferm en root & startx. * any.pm (fileshare_config): rework the custom message and launch userdrake (report_bug): add lilo.conf * standalone/localedrake: - handle --kde_lang with optionally --kde_country - handle --apply change the message & ask wether to logout or not * lang.pm: - handle --kde_lang with optionally --kde_country - handle --apply (lang2kde_lang): add missing valid_kde_langs fuzzy language finding between available langs when it doesn't match (useful for upgrades where fr_FR was fr_FR@euro) * diskdrake/interactive.pm: remove cdrom-burner from media_type set * install_steps_gtk.pm: s/hbox/vbox for "Select Install Class" * fs.pm (mount_options_unpack): add usrquota and grpquota for ext2/ext3/reiserfs/xfs - remove media_type cdrom-burner, use {capacity} instead - use /proc/sys/dev/cdrom/info to fill in the {capacity} * share/compssUsers: add EDITORS in Development/Development add EDITORS in Development/Development 2002/02/18 yduret * bootlook.pm: remove aurora part (commented for the moment) * standalone/scannerdrake: HP OfficeJet support scsi/parport preliminary support * scanner.pm: update scsi parport preliminary support no more show unsupported scanner common output for ScannerDB update from sane *.desc files and from usbtable 2002/02/17 Pixel * diskdrake/interactive.pm: warn_if_renumbered now also done at install 2002/02/17 Pixel * share/rpmsrate: have icewm-light in any case (to be used as a failsafe window manager) add hotplug, usbutils and usbview with the new flag USB * install_any.pm: hotplug now handled via rpmsrate and the USB flag add some log to know why umounting /tmp/image fail * diskdrake/interactive.pm: warn_if_renumbered now also done at install force scalar context for warp_text * share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to remove entities * share/po/Makefile (clean): remove .memdump * any.pm (autologin): do not allow empty user name since no autologin can already be achieved by choosing "No" * install2.pm: do not use run_program::xxx, use directly "system" so that stdout is kept unchanged during "postInstall" execution * network/smb.pm: fix typo (s/nfs/smbfs/) 2002/02/17 siegel * help.pm: new version for 8.2 * share/po/de.po: new german version * share/po/help_xml2pm.pl: added check for missing xsltproc fix perl warnings after adding -w * share/po/.cvsignore: added .memdump * share/po/Makefile: allow me to work with a symlink to doc in this directory 2002/02/16 Pixel * lvm.pm: - LVs "device" field were containing "/dev/vg/number" whereas it must be "vg/name" - added lv_resize * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM * crypto.pm (mirrors): add a timeout via "alarm" (needs testing) 2002/02/16 Pixel * Xconfig.pm: - prefer XKB available from existing XF86Config over /etc/sysconfig/keyboard KEYTABLE - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB * diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM * interactive_newt.pm: do not trash error messages if testing * lang.pm (country2lang): created (write): ensure it doesn't fail when kdeglobals is not writable (eg: the directory doesn't exist) (list): return the languages in a "specific" order (favours non utf8 over utf8) * crypto.pm (mirrors): add a timeout via "alarm" (needs testing) * install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you have any SCSI interfaces" instead of assuming there is a SCSI interface and asking the driver name * lvm.pm: - LVs "device" field were containing "/dev/vg/number" whereas it must be "vg/name" - added lv_resize - call pvcreate with "-y -ff" - created LVs are notFormatted * interactive.pm: - fix non X + testing + su - since "interactive" takes care of "format" for type "combo", remove "format" (so that interactive_newt which switch to type "list" don't apply "format" once again) * standalone/localedrake: handle --kde_country= 2002/02/16 Pixel * lang.pm (country2lang): created (write): ensure it doesn't fail when kdeglobals is not writable (eg: the directory doesn't exist) (list): return the languages in a "specific" order (favours non utf8 over utf8) fix call to update_gnomekderc * standalone/localedrake: handle --kde_country= 2002/02/16 Pablo Saratxaga * share/po/da.po: updated Danish file * share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish and Slovak files 2002/02/16 Pixel * lang.pm: fix call to update_gnomekderc remove unused & unneeded special %lang2kde_lang - add lang::check - fix utf-ko -> utf_ko - fix utf-14 -> utf_14 - modify share/config/kdeglobals - add charset2kde_charset, lang2country, lang2kde_lang 2002/02/15 dam's * standalone/drakfont: embedded mode correction * my_gtk.pm: highlight in gtk icon widget * share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png, share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm, share/step-orange-on.xpm, share/step-green-on.xpm, share/step-red-click.xpm: new gfx new gfx 2002/02/15 Pablo Saratxaga * share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po, share/po/eu.po: updated Basque file; fixed a msgid change * share/po/sv.po: updated Swedish file updated Basque file; fixed a msgid change 2002/02/15 Pixel * run_program.pm: remove assigning STDIN to /dev/null since: - programs should not use STDIN - the "postInstall" script for auto_install's is more happy still having the STDIN. * diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png, pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png, pixmaps/smbnfs_server.png: add icons showing if a mount-point is associated or if the share is mounted * pkgs.pm: fix typo * diskdrake/interactive.pm: use the new warp_text * install_steps.pm: use lang::charset2kde_charset * standalone/localedrake: lang::write doesn't need the filename anymore * any.pm: use 'combo' instead of 'type' for bootloader choice and security choice (requested by fredb&dadou) * interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text * interactive.pm: favour "combo" over "list" in any case * Makefile (check): add lang::check checking 2002/02/15 Thierry Vignaud * share/po/fr.po: update translation 2002/02/14 Pixel * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs * network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code, with more code sharing * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text feature * my_gtk.pm (ctree_set_icon): new function * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a mount-point is associated are coming * standalone/diskdrake: fix expert and testing options handling 2002/02/14 dam's * standalone/drakfont: embedded mode drakfont embedde mode * share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm, share/step-orange-on.xpm, share/step-orange-click.xpm, share/step-green-click.xpm, share/step-red-click.xpm, share/step-green-on.xpm: new gfx 2002/02/14 erwan * tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1, tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub, tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub, tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2, tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1, tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub, tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1, tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub, tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1, tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub, tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub, tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1, tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub, tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub, tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub, tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1, tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub, tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2, tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub, tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub, tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub, tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub, tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1, tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub, tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2, tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1, tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2, tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub, tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1, tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1, tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1, tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2, tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub, tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub, tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub, tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub, tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub, tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub, tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub, tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2, tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub, tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1, tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub, tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub, tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub, tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub, tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub, tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub, tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub, tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New version of grub (0.91) with allstage and pxegrub * tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1, tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub, tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub, tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2: Fixning some file missing in netboot 2002/02/14 Franois Pons * pkgs.pm: fixed obsoletes management according to urpmi code. 2002/02/14 Pablo Saratxaga * share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po, share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from CVS put a rule in Makefile to don't use them (thanks Thierry) updated some po files; removed the ones too lowly translated for the 8.2 * share/po/pt_BR.po: updted Brazilian file updated some po files; removed the ones too lowly translated for the 8.2 * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po, share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated some po files; removed the ones too lowly translated for the 8.2 * share/po/vi.po: updated Vietnamese file updated some po files; removed the ones too lowly translated for the 8.2 * share/po/Makefile: Instead of temporary removingfiles from CVS put a rule in Makefile to don't use them (thanks Thierry) 2002/02/14 Pixel * standalone/lsnetdrake: adapt to the neater network::smb and network::nfs * network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code, with more code sharing * interactive.pm: if testing, don't use kdesu * install_steps.pm: gzip report.bug * interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text feature * standalone/diskdrake: fix expert and testing options handling * my_gtk.pm (ctree_set_icon): new function * c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et still needed :-( #include iconv.h is needed even when C_RPM is undefined * diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a mount-point is associated are coming 2002/02/14 Thierry Vignaud * share/po/br.po: update convert to utf-8 * standalone/drakxtv: uses xawtv internal strings instead of frequencies tables ids as values in %freqtables in order to enhance drakxtv robustness when translators'll arrive. thus we'll pass right strings to scantv instead of translated ones explain how we manage the "all frequencies" case display sorted tv norms 2002/02/13 erwan * tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding missing file on netboot * tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating grub in netboot 2002/02/13 Franois Pons * install_any.pm: avoid generating headers for copying file in postinstall-rpm directory. make sure not to crash if a package that should have been in CD1 is somewhere else. fixed stupid typo. removed all @needToCopy... variables and now use INSTALL category in rpmsrate. * share/rpmsrate: updated INSTALL category with the merge of DrakX obsoleted list (it will use INSTALL now :-) * pkgs.pm: added extension to setSelectedFromCompssList. * share/rpmsrate.server: synced INSTALL category with standard rpmsrate. 2002/02/13 Pablo Saratxaga * share/po/hu.po: updated Danish and Hungarian files * share/po/da.po: updated Danish file updated Danish and Hungarian files 2002/02/13 Pixel * network/nfs.pm: $server->{ip} is no more mandatory * network/smb.pm: don't show shares ending with "$" $server->{ip} is no more mandatory * any.pm (setupBootloader): switch from "list" to "combo" * fs.pm (fstab_to_string): unsetting mount points in standalone will now work - handle WORM type in /proc/scsi/scsi - added media_type cdrom-burner - adapting to new media_type - nicer fd&hd testing * diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default * detect_devices.pm, diskdrake/interactive.pm: - handle WORM type in /proc/scsi/scsi - added media_type cdrom-burner - adapting to new media_type - nicer fd&hd testing 2002/02/13 Till Kamppeter * printerdrake.pm: When one visited the help page of a remote CUPS printer afterwards the full printer modification menu was shown, not only the one for remote CUPS printers. This is fixed now. 2002/02/12 Pablo Saratxaga * share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files * share/po/cs.po: updated Czech file updated Czech and Walloon files 2002/02/12 Pixel * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/ 2002/02/12 Till Kamppeter * detect_devices.pm: In the USB auto-detection checked whether and where the device node was created. 2002/02/12 dam's * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, share/themes/mdk-check_on.png, share/step-green-click.xpm, share/step-green.xpm, share/step-red-click.xpm, share/themes/mdk-check_off.png: new gfx * standalone/drakbackup, network/network.pm: bug correction 2002/02/12 Pablo Saratxaga * share/po/hu.po: updated Hungarian file updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/12 Pixel * devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/ * docs/README.pxe: cleanup the .cfg * share/rpmsrate: - move bootsplash from SYSTEM to X - lower Aurora 2002/02/12 Till Kamppeter * printerdrake.pm: Fixed: - Endless loop when entering printerdrake during installation in recommended mode without local printer - Printerdrake was not closed when one was in the "Add Printer" sequence during installation and one clicked another installation item (entries on left hand side) - When configuring printing only after installation Printerdrake tried to check the installed queues without Foomatic being installed (bug was already in 8.1, but noone discovered it). - CUPS died when one tried to add a (local) printer in recommended mode after installation. - Improved text for the dialog telling that no local printer was detected. - The list of auto-detected printers appeared as drop-down menu and not as a list. * detect_devices.pm: In the USB auto-detection checked whether and where the device node was created. Fixes on device auto-detection: - Made USB printer auto-detection routine in "detect_devices.pm" creating the appropriate device nodes (needed for USB printers being recognized during installation). - Fixed "devices.pm" to be able to handle device files with numbers geater than 9 (ex: /dev/usb/lp10). * standalone/printerdrake: - Assure that Foomatic is installed before checking existing printer queues. * devices.pm: Fixes on device auto-detection: - Made USB printer auto-detection routine in "detect_devices.pm" creating the appropriate device nodes (needed for USB printers being recognized during installation). - Fixed "devices.pm" to be able to handle device files with numbers geater than 9 (ex: /dev/usb/lp10). * printer.pm: Added forgotten '$prefix'es. Fixed: - Endless loop when entering printerdrake during installation in recommended mode without local printer - Printerdrake was not closed when one was in the "Add Printer" sequence during installation and one clicked another installation item (entries on left hand side) - When configuring printing only after installation Printerdrake tried to check the installed queues without Foomatic being installed (bug was already in 8.1, but noone discovered it). - CUPS died when one tried to add a (local) printer in recommended mode after installation. - Improved text for the dialog telling that no local printer was detected. - The list of auto-detected printers appeared as drop-down menu and not as a list. 2002/02/11 dam's * share/list: added modinfo * network/netconnect.pm: added cancel for first step 2002/02/11 Franois Pons * any.pm: fixed syntax error... * Xconfigurator.pm: avoid testing fbdev driver. * install_steps.pm: added Aurora or bootsplash for getting a need on frame buffer. added fbdev for GeForce Integrated. 2002/02/11 Pablo Saratxaga * share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish, Hungarian and Vietnamese files 2002/02/11 Pixel * install_steps.pm: booh, fpons was faster than me on "bootsplash wanting fb". Keeping my solution ;p * c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM is undefined * any.pm: allow to edit the initrd field (thx to randy.k.wilson) * install_any.pm (@needToCopy): add "ntp" 2002/02/11 warly * share/rpmsrate: remove dev from INSTALL, the sun is rising, and there are no more needs to have ppp in the INSTALL section, as the darkness is going away... 2002/02/10 Pixel * any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to expert questions directly (it would need a semi_auto asking on which drive the bios boots...) 2002/02/10 Pablo Saratxaga * share/po/nl.po: updated Dutch file 2002/02/09 daouda * share/rpmsrate: - add rfbdrake to NETWORKING_REMOTE_ACCESS and NETWORKING_REMOTE_ACCESS_SERVER 2002/02/09 Pablo Saratxaga * help.pm: updated help.pm file * share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl, share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po, share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged with the manual help 2002/02/09 warly * share/rpmsrate: add ppp in INSTALL add dev in INSTALL 2002/02/08 dam's * pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png, pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx * network/network.pm: corrected wireless modules 2002/02/08 Pablo Saratxaga * lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for various languages 2002/02/08 Pixel * docs/SHORTCUTS: add F1 & F2 2002/02/08 Till Kamppeter * printerdrake.pm: Added instructions for scanning on HP's MF devices to the printer help page. HP PhotoSmart printers do not scan, so do not show how to scan with them. Do not let dialogs of network configuration correction appear embedded in the "Add printer" wizard. Completed wizard mode for adding a printer in both recommended and expert mode. * printer.pm: Enabled transferring queues of HP multi-function devices between spoolers. CUPS 1.1.13 dies on SIGHUP, do normal restart instead. Completed wizard mode for adding a printer in both recommended and expert mode. 2002/02/08 warly * share/rpmsrate: add bootsplash in system 4 2002/02/07 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/07 Pixel * interactive_gtk.pm: fix error causing a bad window sizing when there is a horiz scroll 2002/02/07 dam's * my_gtk.pm: fixed shadow when testing X 2002/02/07 Pablo Saratxaga * share/po/help_xml2pm.pl: fixed email address 2002/02/07 Pixel * diskdrake/smbnfs_gtk.pm: - don't pop the "do you want to install samba?" - rwindow is not a window when embedded, so set_default_size only if possible * my_gtk.pm: make perl_checker happy ensure no more than one child is in the Plug * interactive.pm: fix (causing XFdrake to use a combo instead of a list) * interactive_gtk.pm: fix error causing a bad window sizing when there is a horiz scroll (exit): ensure USR1 is sent to mcc * Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when choosing monitor "Custom" * install2.pm, install_steps.pm: create and use miscellaneousAfter (so that SECURE_LEVEL is set *after* asking) * diskdrake/interactive.pm (Options): wrap the help text * standalone/diskdrake: handle --embedded xxx xxx 2002/02/07 Thierry Vignaud * standalone/drakxtv, Makefile.config: add drakxtv (scantv gui) * standalone/localedrake: fix pixel stuff: don't restart wm on cancel 2002/02/07 dam's * share/logo-mandrake.png: beta 2 * printerdrake.pm: corrected wizard pb * my_gtk.pm: wizard fixes 2002/02/07 Pixel * fs.pm (mount): precise the type when mounting in standalone (for smb, nfs would not need it) * diskdrake/smbnfs_gtk.pm: - don't pop the "do you want to install samba?" - rwindow is not a window when embedded, so set_default_size only if possible * interactive.pm: fix (causing XFdrake to use a combo instead of a list) * my_gtk.pm: ensure no more than one child is in the Plug * standalone/diskdrake: handle --embedded xxx xxx * interactive_gtk.pm (exit): ensure USR1 is sent to mcc 2002/02/06 dam's * my_gtk.pm: removed ugly pink and ugly left bar for wizard mode 2002/02/06 Franois Pons * rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked to hardware or options. 2002/02/06 Guillaume Cottenceau * share/rpmsrate: have frozen-bubble in GAMES at level 4 2002/02/06 Pablo Saratxaga * share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file 2002/02/06 Till Kamppeter * printer.pm: Automatic configuration of the scanning part of HP's multi-function devices. * printerdrake.pm: Added some stuff for the Wizard mode. Automatic configuration of the scanning part of HP's multi-function devices. Updated automatic package installation in printerdrake, no "kups" and "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also "rpmsrate" and "rpmsrate.server" appropriately. * share/rpmsrate.server, share/rpmsrate: Added scanning packages to INSTALL section, for HP MF device installation by printerdrake. Updated automatic package installation in printerdrake, no "kups" and "qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also "rpmsrate" and "rpmsrate.server" appropriately. 2002/02/05 Till Kamppeter * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for HP's multi-function devices. 2002/02/05 dam's * standalone/logdrake: wizard updated correction for mcc. 2002/02/05 Franois Pons * share/rpmsrate.server: synced with normal rpmsrate for Basque management. * install2.pm: auto_allocate for oem mode is not needed as oem script create all necessary partition. * install_any.pm: add support for Basque (no KDE). * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67. * share/rpmsrate: add support for Basque (no netscape in such case) * rescue/tree/etc/oem: select preferred kernel as kernel-\d. * install_steps.pm: fixed logic, when someone want /root/drakx, it has to check /root/drakx and not /root only. 2002/02/05 Guillaume Cottenceau * rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary and it taints the kernel (pabo) * rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing in /mnt can really be used 2002/02/05 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/05 Pixel * bootloader.pm: fix "help lilo when there is hdd with no hdc drive" * Xconfigurator.pm: testFinalConfig now always returns true if test is skipped because of a bad_card (back to the old behaviour, this was no good (the aim is to enable changing the monitor when test is skipped)) * share/po/fr.po: fix "Details" translated in "Dtails de la partition" but is used at different place where the meaning has nothing to do with "partitions" 2002/02/05 Till Kamppeter * printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for HP's multi-function devices. 2002/02/05 warly * share/compssUsers.server: remove non server group from rpmsrate.server add utilities group in compssUser.server (webmin,ssh-server,wizards,monitoring) * share/rpmsrate.server: begin rpmsrate.server cleaning 2002/02/05 Pixel * bootloader.pm: fix "help lilo when there is hdd with no hdc drive" * Xconfigurator.pm: testFinalConfig now always returns true if test is skipped because of a bad_card (back to the old behaviour, this was no good (the aim is to enable changing the monitor when test is skipped)) 2002/02/05 Pixel * install_steps.pm: log the "chkconfig --del gpm" when there is a serial mouse 2002/02/04 dam's * standalone/logdrake: corrected typo. Yvounet, check your code!! embedded, explain * my_gtk.pm: bug correction * standalone/drakfont, services.pm, network/netconnect.pm: applied cooker guy english review 2002/02/04 Franois Pons * Xconfigurator.pm: added v4l module all the time (along with dbe already present). 2002/02/04 Guillaume Cottenceau * install_steps.pm: have numlock activated when isLaptop rather than $o->{pcmcia} 2002/02/04 Pablo Saratxaga * share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po, share/po/sv.po, share/po/zh_TW.po: updated some po files 2002/02/04 Pixel * install_steps.pm: fix creating /etc/security/msec/server * share/po/fr.po: fix "More" translation 2002/02/04 Till Kamppeter * printer.pm, printerdrake.pm: Made HP multi-function devices configured with HPOJ being displayed correctly by printerdrake. * detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is detected on a parallel port. 2002/02/04 Thierry Vignaud * share/po/fr.po: update french translations 2002/02/03 Pixel * any.pm: force a few more "list"s instead of "combo" boxes since "format" is now handled for combo boxes, combo boxes are used in much too many places. Fix this by forcing type "list" for some cases, and using type "list" when a ask_from has only one entry * interactive.pm: since "format" is now handled for combo boxes, combo boxes are used in much too many places. Fix this by forcing type "list" for some cases, and using type "list" when a ask_from has only one entry * bootloader.pm: - fix some vga text modes 80x30 - chmod 600 lilo.conf when a password is given - fix general "append" (thanks to David Eastcott) "password" works without "restricted", not the other way round (reported by David Eastcott) fix typo 2002/02/03 warly * share/rpmsrate.server: synchronize with current cooker rpmsrate 2002/02/03 Pixel * any.pm: force a few more "list"s instead of "combo" boxes since "format" is now handled for combo boxes, combo boxes are used in much too many places. Fix this by forcing type "list" for some cases, and using type "list" when a ask_from has only one entry * interactive.pm: since "format" is now handled for combo boxes, combo boxes are used in much too many places. Fix this by forcing type "list" for some cases, and using type "list" when a ask_from has only one entry * bootloader.pm: fix typo help lilo when there is hdd with no hdc drive (needs testing!) 2002/02/03 warly * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and compssUsers.server 2002/02/03 Pixel * bootloader.pm: help lilo when there is hdd with no hdc drive (needs testing!) 2002/02/03 warly * share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and compssUsers.server 2002/02/02 Pixel * Xconfigurator.pm: XFree is now 4.2 * standalone/fileshareset: fix dropping samba sections which don't have any "path=" 2002/02/01 Pablo Saratxaga * share/po/sv.po, share/po/DrakX.pot: updated Swedish file * share/po/fr.po: merged again French file to recover some lost strings; and added non breakable spaces at all the needed places as required by French typography 2002/02/01 Pixel * my_gtk.pm: please perl_checker * install_interactive.pm: use from_Mb for choosing the size of the windows partition * install_steps.pm: create symlink /etc/security/msec/server in security > 3 2002/02/01 Till Kamppeter * printerdrake.pm: First steps of the implementation for the "Add printer" wizard. * detect_devices.pm: Made auto-detection working for HP DeskJet 840C on USB General improvements for reliability of USB printer auto-detection 2002/02/01 yduret * pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still jeune and boulet) rm for readding with -kb option (i am jeune and boulet) * standalone/logdrake: ergo fix thx dadou report fix --explain=foo bug that prevent to show anything * bootlook.pm: ergo fix thx dadou report... 2002/02/01 Pablo Saratxaga * services.pm, standalone/drakbackup, printerdrake.pm, standalone/logdrake: changed some strings to make translation easier * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/02/01 Pixel * my_gtk.pm: please perl_checker * install_interactive.pm: use from_Mb for choosing the size of the windows partition * Xconfigurator.pm: testFinalConfig now returns false if test is skipped because of a bad_card or verybad_card and $skip_badcard is not set 2002/01/31 Pablo Saratxaga * lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and keyboard choices (KDE is translated to Tamil) 2002/01/31 yduret * pixmaps/wiz_scannerdrake.png: on rajoute la zolie image 2002/01/30 Pablo Saratxaga * Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard * keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic" keyboard * lang.pm: Enabled "ms" language in the language selection list (there are Gnome and KDE translations for it) * share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po, share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po: updated some po files 2002/01/30 Pixel * share/rpmsrate: add gnome-core in GNOME (used to be required?) * Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the running_window_manager" and "ask_window_manager_to_logout" to any.pm * any.pm (ask_window_manager_to_logout, running_window_manager): created from Xconfigurator and cleaned (selectLanguage): if $langs is empty, don't ask for "other languages" * pixmaps/wiz_printerdrake.png: re-adding with -kb removing for re-adding with -kb * standalone/localedrake: now works in normal user: it modifies the ~/.i18n (todo: handle kde crazy variables?) * lang.pm: handle read'ing and write'ing to a specified file (useful example: ~/.i18n) 2002/01/30 sdupont * standalone/drakbackup: complex merging.... change /var/drakbackup to /var/lib/drakbackup crontab update mail report update sendmail update require rpm mode code optimisation remove about gi new help function 2002/01/29 Till Kamppeter * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of printerdrake. * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer" wizard. Improvements for the selection of a local printer, especially when no or one printer was detected. 2002/01/29 dam's * my_gtk.pm: icons placements are better 2002/01/29 Guillaume Cottenceau * standalone/drakbug_report, standalone/drakautoinst, install2.pm, install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move /root/* files (ddebug.log, install.log, report.bug, auto_inst.cfg.pl, replay_install.img) to /root/drakx/, and also save stage1.log there * partition_table_raw.pm: add new pixel-made grub signature * crypto.pm: update land2tzs accordingly to new url2land Add url2land entries for nl, it, at * any.pm: move /root/* files (ddebug.log, install.log, report.bug, auto_inst.cfg.pl, replay_install.img) to /root/drakx/, and also save stage1.log there rephrase a little bit highest level to not refer to "level 4" anymore use formatAlaTeX for describing security levels * install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk 2002/01/29 Pablo Saratxaga * share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po, share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po, share/po/es.po: updated pot file with help messages from manual 2002/01/29 Pixel * interactive.pm: handle "format" for combo's * bootloader.pm: use the new format for combo's to clean code handling {vga} field * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory * any.pm: use the new format for combo's to clean code handling {vga} field handle the case where samba and/or nfs-utils are not installed * install_steps.pm: move the various bootloader::add_append's in setupBootloaderBefore * diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils are not installed * install_steps_interactive.pm: visually unselect X and docs when minimal install "With X" choice is now working handle "Cancel" on language selection 2002/01/29 Till Kamppeter * pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of printerdrake. * printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer" wizard. Improvements for the selection of a local printer, especially when no or one printer was detected. 2002/01/29 Thierry Vignaud * interactive.pm: fix pixel's minimal example using interactive. 2002/01/29 yduret * docs/interactive/ask_from_list, docs/interactive/wait_message, docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf, docs/interactive/ask_from: added some snipet coe for example * standalone/logdrake: logdrake is now under gi/perl-install/standalone 2002/01/29 Pixel * diskdrake/hd_gtk.pm: look diskdrake.rc in another directory * install_steps.pm: move the various bootloader::add_append's in setupBootloaderBefore 2002/01/28 Guillaume Cottenceau * share/po/fr.po: do the few new translations * standalone.pm: try to reflect hierarchy for */*.pm 2002/01/28 Pablo Saratxaga * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po, printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po, share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po, standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po, share/po/id.po: Corrected various English typos 2002/01/28 Pixel * install_steps.pm: fix typo * partition_table.pm: warn if partitions have been renumbered due to a partition being added or removed * diskdrake/interactive.pm: don't warn_if_renumbered during install warn if partitions have been renumbered due to a partition being added or removed 2002/01/28 siegel * share/po/de.po: new german version 2002/01/28 Till Kamppeter * printerdrake.pm: Replaced "sleep" commands by a subroutine which waits exactly until CUPS is ready. CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device is not "known" to it. * printer.pm: Removed debug helper line. Replaced "sleep" commands by a subroutine which waits exactly until CUPS is ready. CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device is not "known" to it. 2002/01/28 Thierry Vignaud * share/po/br.po: update brezhoneg translations * share/po/fr.po: more french translations 2002/01/28 Pablo Saratxaga * share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po, printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po, share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po, standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po, share/po/id.po: Corrected various English typos 2002/01/28 Pixel * install_steps.pm: fix typo * diskdrake/interactive.pm, partition_table.pm: warn if partitions have been renumbered due to a partition being added or removed 2002/01/28 dam's * network/tools.pm, network/netconnect.pm: debug network testing 2002/01/28 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of scroll bar and reduced its size. * bootloader.pm: fixed get_append if key=mem. timeout passed to 10 instead of 5. 2002/01/28 Guillaume Cottenceau * share/rpmsrate: update games rates 2002/01/28 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/01/28 Pixel * install_any.pm (remove_advertising): ensure removing /tmp/drakx-images can't fail * any.pm: simpler&nicer solution for writing kppprc in utf8 have kppprc strings in utf8 * detect_devices.pm: remove test code * install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully handling nicely the mem=nopentium case) * diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting is usually very short), use a waiting cursor instead. (the wait_message's were causing bad interactivity stuff) 2002/01/27 Pixel * interactive.pm: add a minimal example * services.pm: - move the require on my_gtk to ask_standalone_gtk - cleanup * Makefile.config: - adapt to new diskdrake modules - add logdrake to STANDALONEPMS_ * my_gtk.pm: strange protection against ensure_focus generating a "focus" event causing a dead-loop (reminder: ensure_focus helps ensuring a widget is focused) * Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: - adapt to new diskdrake modules - some cleanup in drakxtools build * diskdrake/removable.pm: remove debugging code new diskdrake modules (diskdrake_interactive is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others created from diskdrake.pm) * diskdrake/interactive.pm, diskdrake/hd_gtk.pm, diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others created from diskdrake.pm) * diskdrake/smbnfs_gtk.pm: fix updating the actions new diskdrake modules (diskdrake_interactive is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others created from diskdrake.pm) * network/nfs.pm: find_exports: add a timeout * fs.pm: new function fstab_to_string * standalone/diskdrake: handle --removable *and* --removable= handle --removable= - new options --hd, --nfs, --smb, --removable - adapt to new diskdrake modules - save $all_hds->{current_fstab} to know if /etc/fstab must be saved 2002/01/25 fabman * share/po/es.po: updated spanish translation 2002/01/25 Pixel * share/rpmsrate: add devfsd * install_any.pm: remove_advertising: use rm_rf since we don't have the real list of files (the .pl's are not in @advertising_images) * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx' 2002/01/25 Till Kamppeter * printer.pm, printerdrake.pm: Less important options only shown when "Advanced" button clicked. Handling of cursor position in the main window improved. Handling of empty printer queue list in main window improved. Removed line breaks from longer texts, so that text flows into window nicely Minor text improvements. 2002/01/25 dam's * install_any.pm: advertising engine updated * share/logo-mandrake.png: beta logo * install_steps_gtk.pm: corrected decy advertising engine updated 2002/01/25 Guillaume Cottenceau * share/po/fr.po: please find a better fix 2002/01/25 Pixel * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple linux fix spelling * Makefile: call clean-rpmsrate * mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx' 2002/01/25 dam's * install_steps_gtk.pm, install_any.pm: advertising engine updated * share/po/fr.po: typo * share/logo-mandrake.png: beta logo 2002/01/25 Guillaume Cottenceau * share/po/fr.po: please find a better fix 2002/01/25 Pixel * mdk-stage1/Makefile: ensure errors propagate * bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple linux fix spelling * Makefile: call clean-rpmsrate * mdk-stage1/pci-resource/Makefile: silly shell ensure errors propagate 2002/01/25 dam's * share/po/fr.po: typo corrected too long label Mise niveau deas paquetages seule. please find a better FIX 2002/01/25 Franois Pons * install_steps_gtk.pm: cosmetic changes. * pkgs.pm: fixed try opening to trigger changeCD callback. 2002/01/24 Pixel * share/rpmsrate: - add msec in any install - use BIGMEM flag for kernel-enterprise - use SMP flag for kernel-smp (those 2 goes together with Warly's clean-rpmsrate) add flag DOCS which should work together with !excludedocs * any.pm: ensure grub is installed if grub is chosen * install_any.pm: - add DOCS (based on !excludedocs) - set BIGMEM and SMP flags (since kernel-smp and kernel-enterprise sub-numbers are better handled by rpmsrate together with Warly's clean-rpmsrate) * install_steps_interactive.pm, install2.pm: minimal install now handles excludedocs * install_steps.pm: log excludedocs minimal install now handles excludedocs put devfs=mount only if devfsd is installed * diskdrake_interactive.pm: truncate lvm name to 63 characters since longer vg names are not allowed 2002/01/24 Till Kamppeter * detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu entry appearing after adding a new printer. Modified "Local Printer" dialog to be more newbie-friendly. 2002/01/23 dam's * network/adsl.pm: updated speedtouch code to use pppoa3 * my_gtk.pm: removed font loading 2002/01/23 Franois Pons * bootloader.pm: fixed to allow multiple mem=xxx parameter (especially mem=nopentium). * install_steps.pm: restored mem=nopentium. removed mem=nopentium. 2002/01/23 Pixel * standalone/fileshareset: name mangling max length set to 12 use name mangling for samba labels 2002/01/23 Till Kamppeter * printer.pm, printerdrake.pm: New user interface in main window More printer info in printer modification window Better support for remote CUPS printers 2002/01/22 dam's * my_gtk.pm: improved widget_icons * install_steps.pm: added net_cnx_pg output when configuring network in auto install 2002/01/22 Franois Pons * pkgs.pm: added support to save already existing synthesis file. * install_any.pm: changed code to build synthesis file, check if they have not already been copied from mirror, or build them using parsehdlist. 2002/01/22 Guillaume Cottenceau * share/po/fr.po: Translate a few things more 2002/01/22 Pixel * diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's) defaults to ext3 instead of ext2 * interactive.pm: add "quit_if_double_click" and "tree_expanded" flags (request from till) add feature "allow_empty_list" for "list" entries (disables the special cases for 0 and 1 element lists) * install_any.pm, diskdrake.pm: cleanup error messages (and fix diskdrake's) * install_interactive.pm, raid.pm: defaults to ext3 instead of ext2 * partition_table.pm: remove unused auto_win_extended stuff handle extended partitions with no partitions inside (esp. for the first hda5 & windows XP) * bootloader.pm: - fix default not being formatted like labels for lilo - check the label is not already used *case-sensitively* - check a kernel_or_dev is given * any.pm: - remove the default entry when that entry is removed - use allow_empty_list for displaying the entries - fix default not being formatted like labels for lilo - check the label is not already used *case-sensitively* - check a kernel_or_dev is given * fsedit.pm: yet again better error reporting defaults to ext3 instead of ext2 * standalone/drakboot, bootlook.pm: fix yves's code duplication of lilo_choice (use $::lilo_choice in bootlook) * interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags (request from till) * install_steps_interactive.pm: cleanup error messages (and fix diskdrake's) better messages for the minimal installs * standalone/diskdrake: yet again better error reporting cleanup error messages (and fix diskdrake's) * share/rpmsrate: move mandrake-mime from SYSTEM to X lower sndconfig 2002/01/22 fcrozat * share/rpmsrate: Really install gnome control center when installing GNOME 2002/01/22 Franois Pons * install_steps.pm: added mem=nopentium for any Athlon or Duron processor. 2002/01/22 Guillaume Cottenceau * Makefile: exclude standalone from testing * share/po/fr.po: resolve small conflict 2002/01/22 Pixel * modules.pm: add the new "mii" module to 'net_raw' * install_steps_interactive.pm: better messages for the minimal installs fix a few cancel's (reported by slegros) don't ask security level in non-expert * install_steps_gtk.pm, install_interactive.pm: fix a few cancel's (reported by slegros) * share/rpmsrate: move mandrake-mime from SYSTEM to X lower sndconfig 2002/01/21 Pixel * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing * install_steps_interactive.pm, install2.pm: can't call any::config_libsafe so early during install, move it where msec is called * any.pm: quiet perl's warning 2002/01/21 dam's * install_steps.pm: fixed network conf in auto install corrected network down * my_gtk.pm: removed debug print icons widget improvment : icon placment, highlighting 2002/01/21 Pixel * diskdrake.pm: increase the size of the "Choose action" box * diskdrake_interactive.pm: remove the "Active" partition feature * interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing * install2.pm: can't call any::config_libsafe so early during install, move it where msec is called * install_steps_interactive.pm: can't call any::config_libsafe so early during install, move it where msec is called cleanup, update, enhance security level choice * standalone/draksec: cleanup, update, enhance security level choice * install_steps.pm: remove deprecated msec groups adding cleanup * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub * any.pm: quiet perl's warning cleanup, update, enhance security level choice when creating users, add handling of xgrp/rpm/adm/wheel groups in high security fix advice about "usermod -G" * tools/i386/netboot/menu.lst.example: add gateway parameter 2002/01/21 dam's * share/logo-mandrake.png: new ugly icon * install_steps.pm: corrected network down 2002/01/21 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2002/01/21 Pixel * share/fonts.tar.bz2: add helvR12_iso15 * install_steps_interactive.pm: """ When I choose a / partition smaller than 200 MB, the installation gives me an error message complaining that my system does not have enough free space for the installation, although basesystem install require less than 100 MB. """ up to around 250MB, minimal install is chosen. questions are: base system only, or no X, or normal. 2002/01/21 siegel * share/po/de.po: updates * standalone/drakbackup: fixed i18n bugs 2002/01/20 Pixel * install2.pm: call msec with run_commands=0 to fix the network reloading (causing various problems, esp. "Net::FTP: Timeout" at X config step) 2002/01/20 Guillaume Cottenceau * standalone/drakbackup: sorry, _("$_") is not allowed 2002/01/20 Pixel * share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with '\n'" * install2.pm: call msec with run_commands=0 to fix the network reloading (causing various problems, esp. "Net::FTP: Timeout" at X config step) 2002/01/20 yduret * timezone.pm: added Italy (time.ien.it) in 2002/01/19 Stew Benedict * standalone/drakbackup: Rework English syntax in drakbackup - hopefully I've got the intent correct ;^) 2002/01/19 Till Kamppeter * detect_devices.pm: Replaced USB printer auto-detection by a more reliable method. 2002/01/18 Franois Pons * install_steps_interactive.pm: changed Update -> Upgrade for installation class. 2002/01/18 Guillaume Cottenceau * standalone/draknet: - move 'use standalone' up to comply to 'explanations' - fix an english typo, s/connexion/connection/ * standalone/drakgw: - move 'use standalone' up to comply to 'explanations' - write higher-level 'explanations' - small fix, s/`ls ..`/glob(..)/ * standalone/scannerdrake: - move 'use standalone' up to comply to 'explanations' - fix a small english problem * share/po/fr.po: reduce a lot of fuzzy and untranslations large stuff from printerdrake, drakbackup and drakfont still to do :-) * c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor, standalone/drakautoinst, standalone/keyboarddrake, standalone/localedrake, standalone/livedrake, standalone/drakboot, standalone/draksec, standalone/tinyfirewall, standalone/mousedrake, standalone/drakxservices, standalone.pm, standalone/drakproxy, standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake, standalone/drakxconf, log.pm, standalone/logdrake, standalone/drakbackup, standalone/drakfont: - write the 'common' part of the 'explanations' stuff, with nice help from Pixel for the tough Perl part - move 'use standalone' up in all standalone apps, to comply to 'explanations' 2002/01/18 Pablo Saratxaga * share/gen_locales.sh, share/locales-skeleton.tar.bz2, share/fonts.tar.bz2: changes to get in line with new XFree86 2002/01/18 Pixel * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11 locale on the box so that XI18N_OBJS's and common are included 2002/01/18 Franois Pons * install_any.pm: add update flag for urpmi medium. * install_steps_interactive.pm: even if user cancel update of package on tree, allow urpmi to install the medium. avoid downNetwork as no difference are made between ethernet or ppp. fixed typo. allow cancel when installUpdates. * crypto.pm: add update medium for crypto for urpmi (flag update). fixed typo. allow selection/deselection of update medium (for cancel of installation). * install_steps_gtk.pm: allow choosePackageTree to display a cancel if a specific medium has been given. 2002/01/18 Pixel * share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11 locale on the box so that XI18N_OBJS's and common are included 2002/01/18 sdupont * standalone/drakfont: update warning messages (qa). * standalone/drakbackup: fix traduction problems and more ... 2002/01/17 Pixel * fsedit.pm, diskdrake_interactive.pm: better error message when auto allocate doesn't do anything 2002/01/17 dam's * network/tools.pm, network/netconnect.pm: draknet : success message only if success * my_gtk.pm: added timeout for redrawing icon widget 2002/01/17 fcrozat * share/rpmsrate: kdebase-nsplugins will be installed by default when selecting KDE 2002/01/17 Franois Pons * pkgs.pm: avoid upgrading a package by selection on files unless it has been obsoleted. 2002/01/17 Pixel * diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/" and "/usr") * fsedit.pm, diskdrake_interactive.pm: better error message when auto allocate doesn't do anything check the mountpoint is valid for encrypting (disallow "/" and "/usr") * fs.pm: do not create /swap * services.pm: move service apcupsd from Printing to System * bootloader.pm: fix many disks bios remapping (esp. booting on scsi when ide is present) 2002/01/17 sdupont * standalone/drakbackup: stable version for qa pkg. (without unstables options) 2002/01/16 Pixel * any.pm: fix cancel on scsi module loading 2002/01/16 sdupont * standalone/drakbackup: update send mail. (pixel mode. ;)) 2002/01/16 Guillaume Cottenceau * install_steps_interactive.pm: installUpdates: use formatAlaTeX 2002/01/16 Pixel * any.pm: fix cancel on scsi module loading * install_steps_interactive.pm: don't drop default_packages in "Base system only" * standalone/fileshareset: add locking to ensure things are in a proper state 2002/01/15 dam's * install_steps_gtk.pm: advertising engine amelioration * my_gtk.pm: automatic icon placement in icon_labels_widget 2002/01/15 Pixel * diskdrake_interactive.pm: remove the test trick encrypted filesystem handling: - using losetup - add "Options" for partitions in diskdrake (expert mode) * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm, diskdrake.pm: encrypted filesystem handling: - using losetup - add "Options" for partitions in diskdrake (expert mode) 2002/01/15 dam's * network/isdn_consts.pm: updated 2002/01/15 Pixel * diskdrake_interactive.pm: remove the test trick encrypted filesystem handling: - using losetup - add "Options" for partitions in diskdrake (expert mode) * c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm, diskdrake.pm: encrypted filesystem handling: - using losetup - add "Options" for partitions in diskdrake (expert mode) * any.pm: have ddcxinfos take the best result of every run 2002/01/15 sdupont * standalone/drakfont: fix progress bar problem. some gi updates: - windows font importation. - advanced font importation. - licence interface. - ... * standalone/drakbackup: new ./drakbackup --show-conf fix daemon problem (media to use). update informations on drakbackup report mail. __ 3290 lines. man pages fr created. some code cleaning on backend mode. (all_user_list && return_path) new functions on backend mode: - show-conf - debug - help - version. 2002/01/14 Guillaume Cottenceau * modules.pm: - eata is SCSI adapter, not 'disk' adapter - have eata module in boot floppies * mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in pci ids * share/rpmsrate: have lbreakout weigthed 4 instead of 2 * mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive (sugg David Faure and Pixel) 2002/01/14 Pixel * install_steps.pm: fix typo (making auto installs working again) 2002/01/13 Pixel * share/rpmsrate: s/lbreakout/lbreakout2/ * install_steps_interactive.pm: cleanup 2002/01/13 sdupont * standalone/drakbackup: some updates ... in "more option" steps user could choose to receive a report by mail for each backups. ftp backup work. fix time problems. remove doc from file. security fix for configuration file. 2002/01/11 dam's * install_steps_gtk.pm: advertising engine works ! champagne. still some display bugs, but they will be corrected later. need new ads and adequat description file new advertising engine * install_any.pm: modifications for new avertising engine * my_gtk.pm: new icons placement 2002/01/11 Pablo Saratxaga * share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po, share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po, share/po/it.po: updated Spanish file; merged help-* files 2002/01/11 sdupont * standalone/drakbackup: update header pixmaps. correction of message problem. * pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png, pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont. * standalone/drakfont: update header pixmaps. 2002/01/10 dam's * install_steps_gtk.pm: domainname corection * network/network.pm: domainname corection corrected network domainname pb * install2.pm: corrected read_resolv => read_conf 2002/01/10 Franois Pons * install_steps_interactive.pm: english taste inspired by daminette. 2002/01/10 Guillaume Cottenceau * rescue/lsparts: better looking output of type of partition (%x => %0x) 2002/01/09 dam's * network/adsl.pm, standalone/net_monitor, standalone/draknet, network/network.pm, network/modem.pm, network/netconnect.pm: big merge from update 8.1 with cvs First part. Part 2 following * my_gtk.pm: added bold option in text creation. Some corrections * install_steps_interactive.pm: corrected fpons typo 2002/01/09 Franois Pons * install_any.pm: fixed too many package selected for No X or With X option of minimal installation. * install_steps_interactive.pm: avoid asking for minimal install for upgrade. * crypto.pm: fix incomplete prefix for update mirror when adding an entry for urpmi. * pkgs.pm: use rpm version comparison function. * c/stuff.xs.pm: added rpmvercmp. 2002/01/09 Franois Pons * install_any.pm: fixed too many package selected for No X or With X option of minimal installation. * install_steps_interactive.pm: avoid asking for minimal install for upgrade. * crypto.pm: fix incomplete prefix for update mirror when adding an entry for urpmi. * pkgs.pm: use rpm version comparison function. * c/stuff.xs.pm: added rpmvercmp. 2002/01/09 Franois Pons * install_any.pm: fixed too many package selected for No X or With X option of minimal installation. * install_steps_interactive.pm: avoid asking for minimal install for upgrade. fixed stupid. * crypto.pm: fix incomplete prefix for update mirror when adding an entry for urpmi. * pkgs.pm: use rpm version comparison function. * c/stuff.xs.pm: added rpmvercmp. 2002/01/08 dam's * install2.pm: cosmetik 2002/01/08 Franois Pons * install_steps_gtk.pm: added eval around pixmap drawing for advertising. 2002/01/08 Pixel * standalone/drakbackup: another round of bad use of _() fixes. fixed bad use of _(). 2002/01/08 sdupont * standalone/drakbackup: drakbackup work ... incremental backup and restore work. 2002/01/08 Franois Pons * Makefile: again fixed dam's sucking, please dam's check what you write before commiting. * standalone/drakautoinst: removed stupid invocation of _("$_"), is it correct code to change it to $_ only ? 2002/01/08 Franois Pons * Makefile: again fixed dam's sucking, please dam's check what you write before commiting. * standalone/drakautoinst: removed stupid invocation of _("$_"), is it correct code to change it to $_ only ? 2002/01/08 Franois Pons * Makefile: again fixed dam's sucking, please dam's check what you write before commiting. 2002/01/07 Franois Pons * steps.pm: changed installUpdates after summary (to get corrected timezone). * install_any.pm: separated setDefaultPackages from setPackages because it is used by allowing only base system to be installed (allow remade a better package selection). * crypto.pm: added bestMirror method to retrieve a good mirror (according to timezone) and add salt with random number to avoid using always the same. * install2.pm: added option to only upgrade packages. * install_steps_interactive.pm: added minimal type of install support. * share/list: fixed to match newer menu package. 2002/01/07 Franois Pons * steps.pm: changed installUpdates after summary (to get corrected timezone). * install_any.pm: separated setDefaultPackages from setPackages because it is used by allowing only base system to be installed (allow remade a better package selection). * crypto.pm: added bestMirror method to retrieve a good mirror (according to timezone) and add salt with random number to avoid using always the same. * install2.pm: added option to only upgrade packages. * install_steps_interactive.pm: added minimal type of install support. * share/list: fixed to match newer menu package. 2002/01/07 dam's * Makefile: socmetic typo added debug mode for the whole install * my_gtk.pm: removed print new pack_start functions, powerpack sub added (code from adrien) incorporated adrien's code to generalize pack functions minor bug fixes * install_steps.pm, network/netconnect.pm: corrected network connection during install * install2: added debug mode for the whole install 2002/01/07 Franois Pons * steps.pm: changed installUpdates after summary (to get corrected timezone). * install_any.pm: separated setDefaultPackages from setPackages because it is used by allowing only base system to be installed (allow remade a better package selection). * crypto.pm: added bestMirror method to retrieve a good mirror (according to timezone) and add salt with random number to avoid using always the same. * install2.pm: added option to only upgrade packages. * install_steps_interactive.pm: added minimal type of install support. * share/list: fixed to match newer menu package. * Makefile: fixed overwriting of install2 filtering, keep diagnostic and strict for debug mode. 2002/01/07 Guillaume Cottenceau * mdk-stage1/network.c: also log server name for HTTP install 2002/01/04 dam's * network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm, network/netconnect.pm: corrected minor bugs in network (among others bug "modifying read only values") recode upNetwork and downNetwork (it might work, at least if you are lucky); 2002/01/04 dam's * my_gtk.pm: corrected minor bugs in network (among others bug "modifying read only values") recode upNetwork and downNetwork (it might work, at least if you are lucky); corrected font display : no useless font->height, but ascent + descent updated * network/isdn_consts.pm: changed asus isdn hisax identify * network/adsl.pm, install_steps.pm, network/tools.pm, network/netconnect.pm: corrected minor bugs in network (among others bug "modifying read only values") recode upNetwork and downNetwork (it might work, at least if you are lucky); 2002/01/04 Franois Pons * http.pm, install2.pm, steps.pm, install_any.pm: added update installation support to install (big modifs need testing). * pkgs.pm: allow to use same identifier for security medium (1u). re-install urpmi. allow some error to be catched. added update installation support to install (big modifs need testing). * crypto.pm: removed test code. allow to use same identifier for security medium (1u). re-install urpmi. allow some error to be catched. added update installation support to install (big modifs need testing). * install_steps_interactive.pm: removed obsoleted comment. allow to use same identifier for security medium (1u). re-install urpmi. allow some error to be catched. added update installation support to install (big modifs need testing). * install_steps_gtk.pm: fixed empty flat package selection when giving a limit to medium. added update installation support to install (big modifs need testing). * install_steps.pm: allow to use same identifier for security medium (1u). re-install urpmi. allow some error to be catched. fix for auto updates. added update installation support to install (big modifs need testing). 2002/01/04 Pixel * detect_devices.pm: enable easy patch-adding of pcitable and usbtable entries 2002/01/03 dam's * standalone/drakbackup: user can be equal to 500 2002/01/03 Franois Pons * install_any.pm: updated code to create synthesis file (including provides on files). 2002/01/03 Pablo Saratxaga * share/po/ar.po: updated Arabic file 2002/01/03 Pixel * install2.pm, Xconfig.pm: save the output of ddcxinfos before modprobe'ing i810fb, and use that output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work anymore) * install_steps_interactive.pm, install_steps_gtk.pm: fix english messages * share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo * pkgs.pm: prefer gcc-cpp * interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button * any.pm: fix english messages save the output of ddcxinfos before modprobe'ing i810fb, and use that output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work anymore) 2002/01/02 Pablo Saratxaga * lang.pm: changed @euro locales to plain names; now old currencies ones are obsolete 2001/12/31 sdupont * standalone/drakfont: new fixed size and add a head pixmap (to update). * standalone/drakbackup: lots of update ... - cron work. - backup incremental & normal work. - corrupted backup data files supported. - error messages updated. - aff list of backup data files pbs. - test all backup files before to restore it. 2001/12/30 Pixel * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the root reserved part is 0% (and not 5%) 2001/12/30 Pixel * fs.pm: format home directories with "-m 0" for ext2&ext3, so that the root reserved part is 0% (and not 5%) 2001/12/28 Pixel * install_steps_interactive.pm (selectMouse): when selecting a usb mouse, call setup_thiskind with at_least_one=1 (so that pci_class probe is used and so unknown serial_usb recognised (cf ldetect)) * modules.pm (load_thiskind): allow $probe_type to be given, allowing forced pci probe (unsafe) * any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind forcing pci_class probe when no modules is found. 2001/12/28 sdupont * standalone/drakbackup: update select data on backup cd 2001/12/27 sdupont * standalone/drakbackup: fix of user selection during restore step. remove return_file_date. change algo for incremental backup. 2001/12/26 sdupont * standalone/drakbackup: some gi corrections & update. incremental restore. 2001/12/22 Pixel * bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is only used during install * my_gtk.pm: export gtkcolor (used in install_steps_gtk) make perl_checker happy 2001/12/22 sdupont * pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png, pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png, pixmaps/backup_hd.png, pixmaps/backup_title.png, pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png, pixmaps/backup_options.png, pixmaps/backup_net.png: remove old drakbackup pixmaps files. * pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png, pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png, pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png, pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png, pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png, pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png, pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png, pixmaps/ic82-back-up-48.png: drakbackup designer icons. * standalone/drakbackup: add pixmaps on backup step. new designer pixmaps on drakbackup. 2001/12/21 sdupont * standalone/drakbackup: some update in file name parsing... etc ... * pixmaps/BDO-drakebackup1.png: drakbackup 2001/12/20 dam's * install_steps_gtk.pm: API changed, so call changed * share/logo-mandrake.png: new ayo logo 2001/12/20 sdupont * standalone/drakbackup: update the todo header the REQUIRE header & code cleaning - tar -cvf tarfilename --after-date="sept 1, 2000" /home l.380 incremental: date -> if already exist do find -m ... | tar ... non incremental: date + delete old before the backup - correct detection of backups during restore. - gi for other media during restore. hd-> ok - backend for build backup update and support incremental backups. - real incremental backup update resore & help. 2001/12/19 dam's * my_gtk.pm: update graphical backend 2001/12/19 Guillaume Cottenceau * modules.pm: add dl2k.o (nic module) per request of nplanel 2001/12/19 sdupont * standalone/drakbackup: - gi for other media during restore. hd-> ok - backend for build backup update and support incremental backups. - real incremental backup add other media source during restore. - update help & license. - code cleaning. - ask during whqt sys step if user want to backup critical files, like /etc/passwd /etc/group /etc/fstab - use preserve permissions during tar - begin of total backup step.( all partitions wanted, windows partitions for example!) - remove replace mode (backup_*_version is enought) 2001/12/18 Franois Pons * install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is untested). 2001/12/18 Pixel * any.pm: fix typos 2001/12/18 sdupont * standalone/drakfont: include new pixmap on main menu. * standalone/drakbackup: sort lists in all lists selection. correct use of incremental backup parse of restore & system state. fix restore user selection problems fix build backup data selection problems ect ... drakbackup -> drakxtools.rpm * pixmaps/ic-drakfont-48.png: drakfont pixmap... 2001/12/18 yduret * standalone/logdrake: fix console mode : exit now 2001/12/18 Pixel * any.pm: fix typos 2001/12/17 dam's * install_steps_gtk.pm: power graphical backend update : text is now centered * my_gtk.pm: power graphical backend update : text is now centered updated new graphical backend 2001/12/17 Guillaume Cottenceau * interactive_gtk.pm, standalone/drakgw: drakgw for gold * tools/pcmcia_config.patch: remove permanently (using patch_pcmcia_config.pl now) 2001/12/17 Pixel * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using tmpfs 2001/12/17 sdupont * standalone/drakbackup: ________________________________________________________________ DONE: incremental backups have depends whith replace options. gtklist not maximized. restore mode. view date during restore view size of file, date & hours during backup on CD ________________________________________________________________ 2001/12/17 Pixel * fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using tmpfs 2001/12/14 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2. 2001/12/14 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection PCI entries : what's in mar files --> what's given by modules (e.g. just as update_kernel does) 2001/12/12 Guillaume Cottenceau * install2.pm: use "askdisplay" to ask a question at begining of install for what display you want to use during install * Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config (from make_boot_img) because we need it in perl-install/Makefile also * mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc, rescue/Makefile: have a bunch of Rescue documentation directly available from the Rescue-menu following suggestions by Denis among others 2001/12/12 Pixel * install2.pm: enable easy screenshot'ing - ensure /usr is formatted if / is - remove /var/lib/rpm if /var is kept * common.pm, docs/README: enable easy screenshot'ing 2001/12/12 Stew Benedict * rescue/make_rescue_img: larger rescue image on PPC to accomodate huge xfs module * bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs initrd load 2001/12/11 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support "filename" in DHCP answers and give this to stage2 as --kickstart parameter 2001/12/11 Stew Benedict * Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC, add "\n" keyboard.pm, new modelines 2001/12/10 Franois Pons * install_any.pm: added network package not present in @needToCopy (package that may be installed by DrakX to avoid re-asking of CD1). * bootloader.pm: added safe guard against looping symlink. 2001/12/10 Pixel * install_steps.pm, any.pm, bootloader.pm: - fix bootloader::add_append - add handling of serial console * http.pm, install_any.pm: enable http:// in auto_install file location 2001/12/05 Pixel * install_steps.pm: no need to give kernelVersion to bootloader::suggest * install_any.pm (kernelVersion): looks at /boot/vmlinuz * bootloader.pm (suggest, add_kernel): much cleanup * diskdrake.pm: fix call to fileshare_config 2001/12/05 dam's * share/logo-mandrake.png: updateed logo 2001/12/05 Guillaume Cottenceau * mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: - fix problems with sockets not initialized (disabling hotplug support -> cardmgr handles sockets) - fix problems with PCMCIA net adapters now using PCI modules, by adding PCMCIA base code in `network.img' 2001/12/05 Pixel * install_steps.pm: no need to give kernelVersion to bootloader::suggest * pkgs.pm (selectPackage): hard coded preference to simple kernel * install_any.pm (kernelVersion): looks at /boot/vmlinuz * diskdrake.pm: fix call to fileshare_config * steps.pm: createBootdisk now after setupBootloader (together with dumber install_any::kernelVersion) * network/tools.pm: fix missing ";" (thanks to Robert Fox) * bootloader.pm (suggest, add_kernel): much cleanup * fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount 2001/12/05 sdupont * pixmaps/backup_bot2.png: update pixmaps * standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ? done : bzip2 backup merge 2001/12/04 dam's * standalone/drakbackup: corrected pixmap path corrected pixmap path * Makefile.config: added drakbackup drakfont 2001/12/04 Guillaume Cottenceau * any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in report.bug * mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter versions of automatic keywords to beat problems with very long kernel commandlines * install_interactive.pm: try to not get something poorly wrapped * c/stuff.xs.pm: floppy_info: add missing close(fd) 2001/12/04 Pixel * network/smb.pm: cleaner smbclient call * install_steps.pm: re-enable supermount by default 2001/12/04 sdupont * pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors problems. * standalone/drakbackup: bzip2 ok for compression to see: decomp without pbs whith tar.gz and tar.bz2 todo: update mode -> decomp + update tar file + recomp 2001/12/04 Guillaume Cottenceau * install_interactive.pm: try to not get something poorly wrapped 2001/12/04 Pixel * install_steps.pm: re-enable supermount by default * network/smb.pm: cleaner smbclient call 2001/12/04 Franois Pons * install_any.pm: fix bad parsing of package to copy (when one doen't exist anymore) in postinstall_rpms directory. 2001/12/04 Guillaume Cottenceau * install_interactive.pm: try to not get something poorly wrapped 2001/12/04 Pixel * install_steps.pm: re-enable supermount by default * network/smb.pm: cleaner smbclient call 2001/12/04 dam's * network/network.pm: additional package for wlan * network/tools.pm: corrected pipe reading 2001/12/04 Franois Pons * any.pm: make sure lilo is installed on automatic mode. * install_any.pm: fix bad parsing of package to copy (when one doen't exist anymore) in postinstall_rpms directory. 2001/12/04 Guillaume Cottenceau * install_interactive.pm: try to not get something poorly wrapped * mdk-stage1/modules.c: fpons is a sucking chief * modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c: support install from USB CDROMS (using usb-storage) 2001/12/04 Pixel * network/smb.pm: cleaner smbclient call 2001/12/04 sdupont * standalone/drakbackup: last update... for cooker drakbackup deamon -> ok drakbackup cvs -> to do (only for /etc) drakbackup wizard -> only last step drakbackup cd -> device detection and ask for only iso file. drakbackup net -> do rsync drakbackup begin -> todo : update initial message update help and about. 2001/12/04 dam's * network/network.pm: additional package for wlan 2001/12/04 Franois Pons * any.pm: make sure lilo is installed on automatic mode. * mdk-stage1/modules.c: fixed gg sucking. 2001/12/04 Guillaume Cottenceau * mdk-stage1/modules.c: fpons is a sucking chief 2001/12/04 Franois Pons * mdk-stage1/modules.c: fixed gg sucking. 2001/12/04 sdupont * standalone/drakbackup: update... 2001/12/03 dam's * Xconfigurator.pm: removed use gtk 2001/12/03 Franois Pons * tools/updatehdlist: initial revision, simple way to update a local set of medium from /RPMS. 2001/12/03 Guillaume Cottenceau * mdk-stage1/modules.c: typo of last commit (unused variable -> could not compile) 2001/12/03 Pablo Saratxaga * share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian and Spanish files 2001/12/03 sdupont * standalone/drakbackup: update option step. write other file content. restore gi. 2001/12/02 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2001/12/01 sdupont * standalone/drakbackup: do not include browser cache. 2001/11/30 Franois Pons * docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long) 2001/11/30 gbeauchesne * partition_table_gpt.pm: - cleanups from mainline * modules.pm: Suckiness fixes from mainline (gc): - Do parse /proc/modules in reverse order - Fix "convert old scsi_hostadapter's to new probeall" scheme * bootloader.pm: - Don't forget to link the initrd to the real image in /boot/efi/ too - Remove DEBUG printouts in install_efi_boot_menu 2001/11/30 Pixel * network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake, Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake --fileshare, fix smb import 2001/11/30 sdupont * pixmaps/backup_left2.png: drakbackup pixmap * standalone/drakbackup: backend mode-> ok for hd we can use drakbackup !. todo : backend mode: - net - cd advanced mode: - device detection (cd writer) wizard: - end of this step. gi: - option step in adnanced step to choice for example tar.gz or tar.gz2 ... update restore step 1 & 2. adv step -> ok todo: wizard ... little update! variables correction in advanced step. wizard user question, sys question & daemon 2001/11/29 Chmouel Boudjnah * share/rpmsrate: Remove linux_logo 2001/11/29 Guillaume Cottenceau * modules.pm: add wvlan_cs * mdk-stage1/modules.c: remove unneeded handling of "alias scsi_hostadapter" * mdk-stage1/stage1.c: add another expert_third_party_modules at the end of enabling-pcmcia-stuff 2001/11/29 Pixel * diskdrake.pm: remove the export tree for nfs/smb feature, remove some test code tentative version with export/import nfs/smb tree (committed to have it in CVS as the export tree is already deprecated) * standalone/fileshareset: - allow root to export everything - remove empty mntpoint (from smb) 2001/11/29 sdupont * standalone/drakbackup: just update.... advanced: users correction during save. user pass, user login, path to save local or on host combo for network protocol. wizrad: already to do! CDRW burn: todo: devices detection (see to_fond_cd). code cleaning. * standalone/drakfont: cleanning code. 2001/11/28 Guillaume Cottenceau * modules.pm: - fix pixel sucks of not parsing /proc/modules in reverse order - be more in sync regarding names of pcmcia drivers * any.pm: add modules.conf in report.bug 2001/11/28 Pablo Saratxaga * share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file 2001/11/28 Pixel * modules.pm (read_conf): fix "convert old scsi_hostadapter's to new probeall" * standalone/drakbackup: make check_what_user works * standalone/fileshareset: better description gr_mem in getgrent is space separated, not comma separated add samba handling. Should be finished now :) 2001/11/28 sdupont * pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps. * standalone/drakbackup: no important changement! clean code update! for gc & Warly: some fixes, correction of advanced, wizard and after advanced steps. the user have a better gestion during advanced step, the protocols ftp, sftp, scp, rsync are now include in advanced step..... etc ;-) todo: when checkbuttonbox are clicked for user choice set it to 0 or 1 juste after. clean code. new after advanced step, correction of checkbuttons problems & new pixmaps. 2001/11/27 dam's * share/logo-mandrake.png: updated, cooker style 2001/11/27 Franois Pons * Xconfigurator.pm: avoid problem of array reference badly evaluated. 2001/11/27 Guillaume Cottenceau * tools/mailchangelog.pl: beurk changelog is at linux-mandrake not mandrakesoft * install_steps.pm: i810 -> no FB at boot 2001/11/27 Pixel * partition_table_gpt.pm (generate_guid): cleanup * any.pm (setupBootloader): s/last/return/ 2001/11/27 sdupont * standalone/drakbackup: advanced step... update. advanced mode ... and ... read and use user list correctly, advanced step user list. * pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for drakbackup. 2001/11/26 Chmouel Boudjnah * tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works * tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works stage1/stage2 of rtl8139 didn't work 2001/11/26 dam's * common.pm, my_gtk.pm: new features for new mcc 2001/11/26 Guillaume Cottenceau * install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing of auto_inst.cfg is not possible 2001/11/26 Pixel * install2.pm: add $o->{excludedocs} feature * Makefile.drakxtools: remove unneeded files (*.bs and .exists) * interactive_gtk.pm: cleanup 2001/11/26 sdupont * standalone/drakbackup: new gi, advanced step. update. gawk cmds. better use for read and save conf. file now on /etc/draxtools/drakbackup/drakbackup.cfg * pixmaps/backup_hd.png, pixmaps/backup_options.png, pixmaps/backup_net.png, pixmaps/backup_time.png: png files for DrakBackup. 2001/11/25 Pixel * standalone/fileshareset: first version. for the moment, only nfs. 2001/11/25 sdupont * standalone/drakbackup: update of read_conf_file and default mode. 2001/11/24 Pablo Saratxaga * share/po/da.po, share/po/es.po: updated Spanish and Danish files 2001/11/24 sdupont * standalone/drakfont: about... * standalone/drakbackup: update update gi ,build of system, user, other, options interfaces. advanced step. 2001/11/23 Guillaume Cottenceau * install_any.pm: package for pcmcia is now called "pcmcia-cs" * any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor /var/lib/pcmcia/stab yes it probably doesn't bring anything valuable but it's how life is :-) 2001/11/23 sdupont * standalone/drakbackup: radio buttons & information message. change gi interface, include help, about and pixmaps (backup_*.png on standalone/pixmaps directory) 2001/11/22 Franois Pons * Xconfigurator.pm: removed loading of agpgart module for i810 card. 2001/11/22 sdupont * standalone/drakfont: about button & GPL license. * standalone/drakbackup: update gi. TODO: separate all the boxes. include wizard and advanced in pixmaps. update notebook gi. 2001/11/21 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2, mdk-stage1/init-data/msgboot-blank.img.bz2, mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg * Xconfigurator.pm: hack for SiS 640 for laptop. * install_any.pm: fixed install_urpmi to build a correct urpmi db. 2001/11/21 Guillaume Cottenceau * modules.pm: i810fb migrate pcmcia in drakx to use in-kernel version (only for 2.4, though --> pcmcia in 2.2 no longer supported) * install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in drakx to use in-kernel version (only for 2.4, though --> pcmcia in 2.2 no longer supported) * install2.pm: i810fb * mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile, mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel, patching untouched imported sources from pcmcia-cs-3.1.29, to ease further updates of vendor code (start from a clean pcmcia_ subdir) 2001/11/21 Pixel * fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use the simple one, so that 'simple' is the only one required when someone modifies %fsedit::suggestions 2001/11/20 gbeauchesne * partition_table.pm: - Add isEfi() to isOtherAvailableFS() test so that install doesn't suggest to format /boot/efi by default. That way, we could preserve (shame on us) EFI boot partition generated by Windows XP 64 bits... 2001/11/20 Guillaume Cottenceau * mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h, mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h, mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h, mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h, mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h, mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h, mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h, mdk-stage1/pcmcia_/probe.c: Initial revision version 3.1.29 2001/11/19 Guillaume Cottenceau * interactive_stdio.pm: for po i can't use $ for string interpolation 2001/11/19 Pablo Saratxaga * services.pm, standalone/scannerdrake: Corrected English errors * share/po/hu.po, share/po/cs.po: updated pot file updated Czech and Hungarian files * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po: updated pot file 2001/11/19 Pixel * any.pm (setupBootloader): fix typo (setupBootloader): fix typo 2001/11/19 Till Kamppeter * printerdrake.pm: Last correction was wrong, reverted it. 2001/11/19 yduret * standalone/scannerdrake: added dynamic support 2001/11/16 Pixel * any.pm: syntax cleanup - a little cleanup - in case there is both scsi and ide hard drives, go to expert questions directly (it would need a semi_auto asking on which drive the bios boots...) 2001/11/14 Pablo Saratxaga * help.pm: updated help file * keyboard.pm: Added Swedish dvorak keyboard * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2001/11/12 sdupont * standalone/drakbackup: new backup tool. backend_mode with options. begin interactive mode. 2001/10/29 dam's * standalone/drakfont: code correction 2001/10/29 gbeauchesne * rescue/list.ia64: - Add xfs_repair and efibootmgr 2001/10/29 Guillaume Cottenceau * fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd * modules.pm: here too CDCEther looks good, I add it 2001/10/29 Pixel * tools/pcmcia_config.patch: adapt for new pcmcia-cs 2001/10/29 sdupont * standalone/drakfont: Copyright (C) correction of warning & code cleaning. the end.... i think... updated uninstall interface & progress bar uninstall interface : lists & progress bar new progress bar update todo: second list 2001/10/28 dam's * standalone/drakfont: cleaning 2001/10/27 daouda * devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module * share/rpmsrate: - increase icewm weight. 2001/10/26 dam's * standalone/drakautoinst, standalone/drakfont: progress bar hack 2001/10/26 Pixel * mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools * partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end on GPT 2001/10/26 sdupont * standalone/drakfont: updated. search correct progress bar mode implementation. updated fix some bugs & interface progress implementation. TODO: progress before backend. search if directory already exist before custom install. 2001/10/25 dam's * standalone/drakautoinst: simple variables handled, code compression. The new and shiny drakautoinst is coming. P|-|34R The new drakautoinst is coming. P|-|34R * pixmaps/mdk_logo.png: additional logo * standalone/drakfont: code correction 2001/10/25 sdupont * standalone/drakfont: merge differents versions. file sector, list of fonts for advanced install... applications choice, license widget, help widget. 2001/10/24 dam's * standalone/drakfont: updated updated updated, lot of bugs. updated * my_gtk.pm: added set_editable 2001/10/24 Guillaume Cottenceau * rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h, mdk-stage1/.cvsignore, rescue/install_bootloader, rescue/tree/etc/rc.sysinit, rescue/Makefile, mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile, rescue/tree/etc/issue, rescue/make_rescue_img, mdk-stage1/newt-frontend.c: - add a GUI to the rescue - provide guessmounts with better efficiency and output, go to console, and reboot - provide install_bootloader which runs lilo from /mnt if it seems safe - add lsparts to rescue, which prints partitions with detected types 2001/10/24 Pixel * fsedit.pm: replace /initrd with /lib/initrd (hds): in case of GPT, allow ext2 to be replaced by any kind of partitions (esp. EFI) * partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm, partition_table_raw.pm: add methods first_usable_sector and last_usable_sector * fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd 2001/10/24 sdupont * standalone/drakfont: scroll ` import_status & progress. gi update. 2001/10/23 Pablo Saratxaga * services.pm: tagged as translatable some left out strigns 2001/10/23 sdupont * standalone/drakfont: gi update doc and progress bar. gui: install from directory gui supported. 2001/10/23 yduret * share/po/fr.po: fixed fohtes grammar 2001/10/22 dam's * network/tools.pm: speedtouch config : added usa vpi vci 2001/10/22 Guillaume Cottenceau * mdk-stage1/modules.c: oops forgot to umount after "updatemodules"... 2001/10/22 Pixel * rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...) 2001/10/21 Till Kamppeter * printerdrake.pm: Fixed connection device setting for "oki4w" driver. 2001/10/19 gbeauchesne * partition_table_gpt.pm: - Use /dev/random through devices::make() instead of /dev/urandom - Localize file descriptor - Capitalize error message if no /dev/random found * partition_table.pm: - s/Win98 FAT32/FAT32/ - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/ - Add "FAT32" to @important_types for IA-64 & /boot/efi 2001/10/19 Guillaume Cottenceau * mdk-stage1/stdio-frontend.c: small fix 2001/10/19 Pixel * install_interactive.pm: OOize can_raw_add * partition_table.pm: handle empty $hd->{primary}{raw} (happens with no partitions on ia64) - raw_add, can_raw_add moved to partition_table_raw - using raw_removed * partition_table_dos.pm: better handling of CHS overflow (mainly for non cylinder-boundary aligned part (like ia64)) * partition_table_raw.pm (adjustEnd): in case the end is totalsectors, don't adjust since totalsectors / cylinder_size may not be an integer (zero_MBR): defaults to GPT on ia64 (raw_add, can_raw_add, raw_removed): created, can now be overloaded in partition_table_*.pm's (get_geometry): keep the total_sectors as given by c::total_sectors, don't try to recompute it based on nb_cylinders (for hds where total_sectors is not a multiple of nb_cylinders) * common.pm: cleanup * partition_table_gpt.pm: fix ending is last sector, not next one add TODO for partition entry guid - writing partition table now works - creating a new partition table now works (except GUIDs generation) 2001/10/18 dam's * network/tools.pm: corrected GET_FL and co 2001/10/18 Franois Pons * standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now use rgb.txt instead). 2001/10/18 Pixel * partition_table_gpt.pm: - add checksum verif on partition entries - detect the type of partition since the partition table types seem quite poor read part of GPT partition table working * fsedit.pm: - add checksum verif on partition entries - detect the type of partition since the partition table types seem quite poor * partition_table.pm: read part of GPT partition table working shorter GPT name * detect_devices.pm: safer modprobe ide-floppy 2001/10/18 sdupont * standalone/drakfont: change Fontmap ghostscript file. drakfont support now .gsf fonts end of backend...... update 2001/10/17 dam's * standalone/draksec: typo 2001/10/17 sdupont * standalone/drakfont: implementation of type1 fonts removing. ghostscript, xfs and staroffice tested and supported. 2001/10/16 dam's * standalone/draksec: correct bad level display * standalone/interactive_http/Makefile: makes rpmlint happy 2001/10/16 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: print checks * rescue/tree/etc/rc.sysinit: better phrasing 2001/10/16 Stew Benedict * rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl, rescue/list.ppc: typo in update kernel by /me fine-tune sanity_check for ppc move /dev/nvram from list.ppc to devices.pl 2001/10/15 Pablo Saratxaga * share/po/da.po: updated Danish file 2001/10/15 yduret * scanner.pm: wonderful perl forgotten 2001/10/12 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also supported 2001/10/12 sdupont * standalone/drakfont: support all installations, and support xfs, ghostcript, staroffice. todo aplli: openoffice, gimp, abiword, netscape & other browsers... todo or to see: --strong ttmkfdir -c ??? emd of backend.. 2001/10/11 dam's * standalone/draknet: multiple card configuration bug corrected. allelluia. * network/tools.pm: aded use c * standalone/drakfont: code review 2001/10/11 Guillaume Cottenceau * interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again 2001/10/11 Pixel * install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom 2001/10/11 sdupont * docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf, docs/drakfont/drakfont.dvi: clean directory.. * docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia, docs/drakfont/dia_srcs/drakfont_uninstall.dia, docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files... * standalone/drakfont: improved.... improved && implement remove fonts for xfs improved improved optimisation correction of option install --replace dialog of install options correction of install option. * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg & ps with -kb option clean...2 2001/10/10 dam's * standalone/drakfont: typo improved options handling * standalone/net_monitor: ergo and features improvments, pipe handling correction * network/tools.pm: updated 2001/10/10 Pablo Saratxaga * lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language 2001/10/10 Pixel * interactive.pm: normalize the default type entry ("entry") * interactive_gtk.pm: fix typo (on clicked_may_quit) 2001/10/10 sdupont * standalone/drakfont: option replace for "install from" & windows_import... update install dir better for --install new version of drakfont. in perl langage. * docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux, docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf, docs/drakfont/drakfont.tex, docs/drakfont/Makefile, docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi, docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs drakfont 2001/10/10 yduret * standalone/scannerdrake: first apparition on earth.. * Makefile.config: added scannerdrake 2001/10/09 dam's * network/tools.pm: removed trash connection test is now in background, corrects the interface freeze problem * pixmaps/net_u.png: new pixmap for draknet/net_monitor * standalone/net_monitor, standalone/draknet: connection test is now in background, corrects the interface freeze problem 2001/10/09 Pablo Saratxaga * share/po/hu.po: updated Hungarian file 2001/10/09 Pixel * install_any.pm: fix detecting read-only drives (like memory-sticks) * partition_table.pm: make perl_checker happy * partition_table_raw.pm: fix detecting read-only drives (like memory-sticks) make perl_checker happy * modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care of usb-storage if possible, so that patch on usb floppy works 2001/10/09 Stew Benedict * Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux keycodes on PPC, add additional Apple modelines * install_steps_interactive.pm: re-enable PPC bootloader setup 2001/10/08 dam's * c/stuff.xs.pm: added FL_GET and FL_SET 2001/10/08 Franois Pons * modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as they have been removed from the skip list for stage1. * rescue/tree/etc/oem: added silly modification to avoid using more than 7 partition for DAC960 (/home and /var are not created in the current state). 2001/10/08 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: ia64 * mdk-stage1/Makefile: 8.1 -> cooker 2001/10/08 Pixel * modules.pm, partition_table.pm: yet a few other ataraid cases 2001/10/06 Stew Benedict * partition_table_raw.pm, partition_table.pm: updates to accomodate IBM PPC systems with DOS partition table 2001/10/05 Franois Pons * rescue/tree/etc/oem: added (missing) creation of /hd/boot/grub/device.map (needed for CompactSmartArray). 2001/10/05 Guillaume Cottenceau * share/rpmsrate: kdegames : 2 -> 4 2001/10/04 Franois Pons * rescue/tree/etc/oem: fix (work around) parted problem when it refuse to use all disk space for partition. added another psacct log file in touch. fixed typo on scalar reference for psacct bug. updated with 8.1 OEM ProSuite. * tools/oem-prepare: updated with 8.1 OEM ProSuite. 2001/10/04 Pablo Saratxaga * share/po/hu.po: updated Hungarian file 2001/10/04 Pixel * partition_table_dos.pm: is little-endian, so use "V" instead of "I" 2001/10/03 Franois Pons * tools/oem-prepare: synced with oem script. removed 3D games not installed by default. * rescue/tree/etc/oem: fixed typo in produced patch. added extension to pro suite CD (added kernel-enterprise to possibly installable and install kernel22). removed 3D games not installed by default. added missing xmms-arts. allow halting. 2001/10/03 Pixel * fsedit.pm: yet another ataraid support patch 2001/10/02 Franois Pons * Xconfigurator.pm: fix previous hack. added hack to do "/sbin/depmod -a" for NVIDIA driver. 2001/10/02 Guillaume Cottenceau * mdk-stage1/probing.c: new pci-ids.h * mdk-stage1/usb-resource/update-usb-ids.pl: better look * share/po/fr.po: small fix * standalone/drakgw: don't call pkgs_install when no package needs to be installed 2001/10/02 Pixel * detect_devices.pm: bloody ataraid detection * devices.pm: ataraid devices support 2001/10/01 Franois Pons * share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT. * rescue/tree/etc/oem: added CHARSET support, removed kernel22 and kernel-enterprise from list of package installable in oem mode, added possibility to set language on /etc/oem script invocation. * install_steps_interactive.pm: avoid chooseCD on oem install. * install_steps_gtk.pm: avoid asking for changing CD on oem install. * install_any.pm: use $boot_medium for default medium in oem install, avoid using kernel22 or kernel-enterprise in oem install (space available is too tight on CD oem version). * tools/oem-prepare: synced with oem script. 2001/10/01 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects what's in the marfiles 2001/10/01 Pablo Saratxaga * share/po/bg.po: updated Bulgarian file 2001/09/29 Chmouel Boudjnah * docs/README: New adress where to find the kernel BOOT 2001/09/29 Pablo Saratxaga * share/po/da.po: updated Danish file 2001/09/27 Guillaume Cottenceau * rescue/drvinst: don't install usb keyboard drivers more than once try to fix usb keyboards 2001/09/27 kjx * share/po/zh_CN.po: translating 2001/09/26 gbeauchesne * install_any.pm: - Suggest /boot/efi on IA-64 for the first VFAT partition found, instead of /mnt/windows * bootloader.pm: - bootloader.pm (suggest): don't search for dos (or windows) boot partition on IA-64 since ELILO can only boot Linux. - bootloader.pm (write_lilo_conf): don't cry if we don't have /boot/boot.b or boot/message on IA-64. * rescue/list.ia64: - Add file list for "rescue" disk * share/list.ia64, partition_table.pm: - partition_table.pm: Add XFS suggestion for IA-64 - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS 2001/09/25 baudens * share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ Remove totally crazy translation. Translators, please use your brain! 2001/09/25 gbeauchesne * partition_table.pm: - Add ReiserFS and Ext3fs entries for IA-64 2001/09/25 Pixel * pkgs.pm (naughtyServers): cleanup comments 2001/09/25 warly * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is installed for newbie and drakfirsttime does not fail. put gtk-themes to 4 so that it is installed for newbie and drakfirsttime does not fail. 2001/09/25 Franois Pons * install_steps_interactive.pm: allow non ejectable medium to allow all hdlists on the bootable medium. make current boot medium already selected if multiple hdlist are on this boot medium. 2001/09/25 warly * share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is installed for newbie and drakfirsttime does not fail. put gtk-themes to 4 so that it is installed for newbie and drakfirsttime does not fail. 2001/09/24 dam's * share/po/fr.po: corrected translation 2001/09/24 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h, mdk-stage1/disk.c: hd.img now detects partition types... backport from DrakX :-) 2001/09/24 Pablo Saratxaga * share/po/nl.po: updated Dutch file 2001/09/24 Pixel * fs.pm (mount_part): fix for iso loopback mounted * share/po/fr.po: fix 2001/09/24 dam's * network/adsl.pm, network/isdn.pm: type assignation bug fix corrected type assignation * share/po/fr.po: corrected bad translation * standalone/draknet: corrected type assignation 2001/09/24 Guillaume Cottenceau * bootloader.pm: fix add_append (there was a ) at the end of the parameter value) 2001/09/24 Pablo Saratxaga * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean and Turkish files 2001/09/24 Pixel * fs.pm (mount_part): fix for iso loopback mounted * share/po/fr.po: fix 2001/09/24 warly * share/rpmsrate: lower arkeia 2001/09/24 dam's * modules.pm: corrected isdn firmware * network/adsl.pm, network/isdn.pm: type assignation bug fix corrected type assignation * share/po/fr.po: corrected bad translation * standalone/draknet: corrected type assignation 2001/09/24 Guillaume Cottenceau * bootloader.pm: fix add_append (there was a ) at the end of the parameter value) 2001/09/24 Pablo Saratxaga * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean and Turkish files 2001/09/24 Pixel * fs.pm: fix small error merging existing fstab * share/po/fr.po: fix * diskdrake.pm: do not propose to mount/umount removable medias (disabled for now) * diskdrake_interactive.pm: hide the supermount checkbox in standalone 2001/09/24 warly * share/rpmsrate: lower arkeia 2001/09/24 dam's * network/netconnect.pm, network/ethernet.pm: bug fix * modules.pm: corrected isdn firmware * network/isdn.pm, network/adsl.pm: type assignation bug fix corrected type assignation * standalone/draknet: corrected type assignation * install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd during install 2001/09/24 Franois Pons * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many problems reported with it. * share/rpmsrate: allow rpm build for non expert who choose development. * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed packages). 2001/09/24 Pablo Saratxaga * share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean and Turkish files 2001/09/24 Pixel * fs.pm: fix small error merging existing fstab add "iocharset=" for cdrom * install_steps.pm: - disable supermount by default - cleanup nsswitch.conf wins removing * diskdrake.pm: do not propose to mount/umount removable medias (disabled for now) * diskdrake_interactive.pm: hide the supermount checkbox in standalone 2001/09/24 siegel * share/po/de.po: new german version 2001/09/24 warly * share/rpmsrate: lower arkeia 2001/09/24 dam's * network/netconnect.pm, network/ethernet.pm: bug fix 2001/09/24 Franois Pons * Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many problems reported with it. * share/rpmsrate: allow rpm build for non expert who choose development. removed any reference to XFree86-glide-module or Glide_XXX packages. * pkgs.pm: sort mediums by number, in allMediums() else they will be in hash keys orders in install_steps_interactive::chooseCD(). * install_steps.pm: disable wins in /etc/nsswitch.conf (after installed packages). 2001/09/24 Pixel * fs.pm: add "iocharset=" for cdrom * install_steps.pm: - disable supermount by default - cleanup nsswitch.conf wins removing 2001/09/24 Franois Pons * share/rpmsrate: removed any reference to XFree86-glide-module or Glide_XXX packages. * pkgs.pm: sort mediums by number, in allMediums() else they will be in hash keys orders in install_steps_interactive::chooseCD(). 2001/09/24 Till Kamppeter * printer.pm: File permission settings during install were not done. Fixed. 2001/09/23 Guillaume Cottenceau * share/po/fr.po: misc typo correction * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode 2001/09/23 Pixel * install_steps_gtk.pm: add "Graphical Environment" in meta_class server * share/rpmsrate: simplify (for the moment) do not force X flag, have it selected for any "Graphical Environment" * share/compssUsers, install_any.pm: do not force X flag, have it selected for any "Graphical Environment" 2001/09/23 Guillaume Cottenceau * install_steps.pm: voodoo cards don't like performing 3d accel in fb mode 2001/09/23 Pablo Saratxaga * share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file * share/po/zh_TW.po: updated Chinese file 2001/09/23 Pixel * install_steps_gtk.pm: add "Graphical Environment" in meta_class server * fsedit.pm: add magic SWAPSPACE2 * bootloader.pm: allow bootloader on fat partitions * share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag, have it selected for any "Graphical Environment" 2001/09/22 Guillaume Cottenceau * mdk-stage1/Makefile: version is 8.1 2001/09/22 Pablo Saratxaga * share/po/bs.po: updated Bosnian file 2001/09/22 Pixel * fs.pm, install2.pm: - cleanup noatime option setting - cleanup exec option setting (must noexec => 0 instead of exec => 1) * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu 2001/09/22 Pablo Saratxaga * share/po/bg.po: updated Bulgarian file 2001/09/22 Pixel * bootloader.pm (suggest): fix kernel 2.2 secure adding in menu 2001/09/22 Till Kamppeter * printerdrake.pm: Added support for automatic /dev/... file permissions setting by devfsd. Improved matching of auto-detection results with database entries. Given hint to the user to select the correct model when matching fails. * printer.pm: Added support for automatic /dev/... file permissions setting by devfsd. 2001/09/21 Franois Pons * detect_devices.pm: avoid detecting plip for live upgrade. 2001/09/21 Pablo Saratxaga * keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some functionality is lost small fix for "vn" keyboard (enable toggle key) * share/po/ko.po: updated Korean file updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * printerdrake.pm: small fix 2001/09/21 Till Kamppeter * printer.pm, printerdrake.pm: When one changes the driver of a freshly added printer, the cursor was not pointed to the old driver, fixed. Fixed paper size not set according to chosen language during installation. 2001/09/21 dam's * network/adsl.pm: typo 2001/09/21 Franois Pons * install_steps_gtk.pm: reworked medium management. moved com_license to parent package (as code that show the license is now available even for non gtk install). * Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade. * pkgs.pm, install_any.pm: reworked medium management. * detect_devices.pm: avoid detecting plip for live upgrade. * install_steps_interactive.pm: avoid keeping testing code. reworked medium management. added code to support changeable cdrom, set a unique copy of license for installing commercial application as package variable (exported). 2001/09/21 gbeauchesne * share/po/no.po: remove trailing '\n' 2001/09/21 Pablo Saratxaga * share/po/hu.po, share/po/no.po: updated pot file updated pot file updated Norwegian and Hungarian files updated pot file * help.pm: updated help file * share/po/help_xml2pm.pl: updated pot file * printerdrake.pm: small fix changed text strings to be more translator friendly (NEVER EVER cut a phrase) * share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file updated pot file corrected extra \n updated pot file * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file updated pot file updated pot file * keyboard.pm: adapted keyboard priority numbers (it is useless to give a multichoice with a value higher than 90) * share/po/zh_TW.po: updated pot file updated pot file 2001/09/21 Pixel * bootloader.pm: write password in lilo.conf even if it's also done by msec, otherwise lilo will fail with restricted only * install_steps.pm: Ensure $o->{superuser}{name} is temporary * share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for libsafe and kernel22-secure 2001/09/21 Till Kamppeter * printer.pm: Added a forgotten "_( ... )". 2001/09/21 warly * share/rpmsrate: add gnomemeeting and openmcu 2001/09/20 Pixel * install_interactive.pm (partition_with_diskdrake): ensure the $::expert flag modifications in diskdrake do not escape from diskdrake * install_steps_interactive.pm (choosePartitionsToFormat): do not propose check bad blocks for xfs and jfs 2001/09/20 dam's * network/netconnect.pm: don't reapply the conf, if already applied. usefull for dhcp, because the network should be restarted after configured * network/adsl.pm: test if microcode is there * bootlook.pm: removed blocking die 2001/09/20 fcrozat * share/rpmsrate: Add gnome-user-docs to GNOME install Install Mdk eazel engine for gnome 2001/09/20 Franois Pons * pkgs.pm: take care not probing in /dev/ for finding package to upgrade, this cause problem in live_upgrade. * Xconfigurator.pm: added VideoRam for ET 6x00 card. * network/netconnect.pm: tried to fix damien sucking. 2001/09/20 Guillaume Cottenceau * share/po/fr.po: misc 2001/09/20 Pablo Saratxaga * share/po/tr.po: updated Turkish file * share/po/cs.po: updated Czech file * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish, Chinese and Dutch files 2001/09/20 Pixel * install_interactive.pm (partition_with_diskdrake): ensure the $::expert flag modifications in diskdrake do not escape from diskdrake * share/rpmsrate: raise i18n fonts * fsedit.pm (hds): do a get_major_minor where needed * lang.pm: replace xcin by chinput as per Alex request * install_steps_interactive.pm (choosePartitionsToFormat): do not propose check bad blocks for xfs and jfs 2001/09/20 Till Kamppeter * printerdrake.pm: Fixed flow of the program for the "recommended" mode of the installation. 2001/09/20 dam's * network/netconnect.pm: don't reapply the conf, if already applied. usefull for dhcp, because the network should be restarted after configured * mouse.pm: text positionning * standalone/net_monitor: less gethostbyname 2001/09/20 Franois Pons * pkgs.pm: take care not probing in /dev/ for finding package to upgrade, this cause problem in live_upgrade. * network/netconnect.pm: tried to fix damien sucking. 2001/09/20 Pablo Saratxaga * share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish, Chinese and Dutch files 2001/09/20 Pixel * share/rpmsrate: raise i18n fonts s/telnet-server/telnet-server-krb5/ * fsedit.pm (hds): do a get_major_minor where needed * fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type * lang.pm: replace xcin by chinput as per Alex request * printerdrake.pm: back out the modif from till as asked by till 2001/09/20 Till Kamppeter * printerdrake.pm: Make it possible to configure more than 1 printer in a "recommended" mode installation. 2001/09/19 dam's * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network restart at better place 2001/09/19 Guillaume Cottenceau * share/rpmsrate: chromium and tuxracer don't work well with Riva 2001/09/19 Pablo Saratxaga * share/po/it.po: updated pot file updated help xml * help.pm: updated help file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file * share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po: updated help xml * share/po/wa.po: updated pot file updated pot file 2001/09/19 dam's * network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network restart at better place 2001/09/19 fcrozat * share/rpmsrate: Add mdk-eazel-engine * share/po/fr.po: Fix french mistakes 2001/09/19 Franois Pons * pkgs.pm: added code to check if package are really installed. * Xconfigurator.pm: Rage 128 doesn't like XF3 at all. make only bad card Riva128 for testing XF4. Riva128 is now a bad card. 2001/09/19 Guillaume Cottenceau * mdk-stage1/init.c: raklet quoting * share/rpmsrate: chromium and tuxracer don't work well with Riva 2001/09/19 Pixel * loopback.pm (create): don't use seek to create big files otherwise you get hole and swapon doesn't like it * any.pm (ask_users): default icon "man" * lang.pm: compatibility with older $o->{lang} names (for auto_installs) * install2.pm: initial support for server install compatibility with older $o->{lang} names (for auto_installs) * install_steps_gtk.pm: initial support for server install * printerdrake.pm: help perl_checker * pkgs.pm, share/rpmsrate, install_any.pm: - gmc instead of nautilus for non-latin1 installs - introduce CHARSET flag and use it 2001/09/19 Till Kamppeter * printer.pm: Network is now only required (and checked) for remote printers. Several buglets fixed in remote CUPS server dialog. * printerdrake.pm: Removed a forgotten debug help line from the code. Fixed typo in dialog text of high/paranoid security. Network is now only required (and checked) for remote printers. Several buglets fixed in remote CUPS server dialog. 2001/09/18 dam's * network/netconnect.pm: don't ask to connect if lan or dhcp 2001/09/18 Guillaume Cottenceau * install2.pm: don't create bootdisk by default * share/po/fr.po: misc 2001/09/18 Pixel * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs) * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big installs 2001/09/18 dam's * network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch * network/netconnect.pm: don't ask to connect if lan or dhcp * standalone/drakgw: debug 2001/09/18 Franois Pons * rescue/tree/etc/oem: added X group with SYSTEM. finally work arounded rpm bug by flepied. * detect_devices.pm: added back full pci probe for stage2 command lspci. removed full pci probe for stringlist (used for generating report_bug). * install_steps_interactive.pm: now finally really fixed printer label in summary dialog. fixed printer description in summary (again). fixed no printer displayed (at least, print Remote CUPS server). * commands.pm: make lspci a full pci probe instead of safe pci probe. 2001/09/18 gbeauchesne * Xconfigurator.pm: - Force XFree 4 on IA-64. No XFree 3.3.X there... * tools/ia64/elilo.efi: - elilo 3.1 2001/09/18 Guillaume Cottenceau * install2.pm: don't create bootdisk by default * standalone/drakautoinst: have "manual" and "replay" translated * share/po/fr.po: misc 2001/09/18 Pablo Saratxaga * share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files 2001/09/18 Pixel * lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: - remove ISO-8859-5, KOI8-R and KOI8-U - cleanup packdrake extracting locales - cleanup/fixes lang.pm * install_steps.pm: fix setting kdmrc for latin1 * any.pm (write_passwd_user): fix setting "pw" field (for auto_installs) * install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big installs 2001/09/17 Franois Pons * rescue/list: updated for rpm 4.0.3. * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of "rpm --root" but need more testing. * standalone/XFdrake: removed comment. added support to configure NVIDIA driver if everything is correctly installed. 2001/09/17 Pixel * fs.pm, fsedit.pm: - '--' to separate options for supermount + small workaround (ro and exec before --) - fix nfs in manualFstab (for auto_installs, reported by David Eastcott) 2001/09/17 Till Kamppeter * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written in expert install. 2001/09/17 dam's * network/network.pm: no expert mode needed to choose gateway 2001/09/17 Franois Pons * rescue/list: updated for rpm 4.0.3. * rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of "rpm --root" but need more testing. * printerdrake.pm: add eval around installing lexmark-driver (proprietary). * Xconfigurator.pm: deactivating bad card test (too). * standalone/XFdrake: removed comment. added support to configure NVIDIA driver if everything is correctly installed. 2001/09/17 odin * share/po/fr.po: updated fr.po 2001/09/17 Pablo Saratxaga * keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting English language but also euro symbol can choose it. fixed Belgian keyboard * share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and Wallon files; corrected error syntax in French file * lang.pm: Added choice of "English|Ireland (euro)" so people wanting English language but also euro symbol can choose it. 2001/09/17 Pixel * fs.pm: - '--' to separate options for supermount + small workaround (ro and exec before --) - fix nfs in manualFstab (for auto_installs, reported by David Eastcott) (mount): do not hand update /etc/mtab for nfs mounts, already done by mount(8) (set_default_options): disable iocharset= and codepage= for supermount * partition_table.pm (adjust_main_extended): do not use linux extended * detect_devices.pm (pci_probe): log full pci probes * standalone/drakbug_report: fix * fsedit.pm: - '--' to separate options for supermount + small workaround (ro and exec before --) - fix nfs in manualFstab (for auto_installs, reported by David Eastcott) 2001/09/17 Till Kamppeter * printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written in expert install. Do not die when "chkconfig" fails (needed for "security_check"). Added "-q" option to foomatic-configure (should not get interactive). Added handling of high and paranoid security levels. * printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert mode installation. Added handling of high and paranoid security levels. 2001/09/17 Franois Pons * printerdrake.pm: add eval around installing lexmark-driver (proprietary). 2001/09/17 Pixel * detect_devices.pm (pci_probe): log full pci probes * fs.pm (set_default_options): disable iocharset= and codepage= for supermount 2001/09/17 Franois Pons * printerdrake.pm: add eval around installing lexmark-driver (proprietary). 2001/09/17 Pablo Saratxaga * help.pm: updated help file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2001/09/17 Pixel * detect_devices.pm (pci_probe): log full pci probes 2001/09/16 Pixel * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 * pkgs.pm (read_rpmsrate): fix bug 2001/09/16 Till Kamppeter * printer.pm: Fixed bug which prevented from printing the option list during install. Fixed bug which prevents printerdrake from running without PDQ installed. 2001/09/16 Pixel * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 more up to my need ALL flag in compssUsersChoice remove auto-install special case (initialisation of compssUsersChoice) * share/rpmsrate: - cleanup packages appearing twice in rpmsrate - handle a few case of packages appearing twice - special case for packages appearing in INSTALL section (flag dropped) - new special flag ALL for compssUsersChoice * pkgs.pm: more up to my need ALL flag in compssUsersChoice - cleanup packages appearing twice in rpmsrate - handle a few case of packages appearing twice - special case for packages appearing in INSTALL section (flag dropped) - new special flag ALL for compssUsersChoice * rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from MDK::Common 2001/09/16 siegel * share/po/help_xml2pm.pl: added "systemitem" 2001/09/16 Till Kamppeter * printer.pm: Fixed bug which prevents printerdrake from running without PDQ installed. 2001/09/16 dam's * mouse.pm, my_gtk.pm: bugfix + cosmetic changes 2001/09/16 Pablo Saratxaga * help.pm: updated help.pm file * share/po/hu.po: updated Hungarian file updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2001/09/16 Pixel * diskdrake.pm: "please click on ..." for removable, nfs, smb. * fsedit.pm: enhance lvm handling (mostly standalone) - cleanup & enhance raid mdstat reading (now works with or without devfs mounted) - chunk size is buggy? * install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64 more up to my need ALL flag in compssUsersChoice remove auto-install special case (initialisation of compssUsersChoice) use new mkdir_p, rm_rf and cp_af from MDK::Common * share/rpmsrate: - cleanup packages appearing twice in rpmsrate - handle a few case of packages appearing twice - special case for packages appearing in INSTALL section (flag dropped) - new special flag ALL for compssUsersChoice * verify_c: add special case for c::to_utf8 * pkgs.pm: more up to my need ALL flag in compssUsersChoice - cleanup packages appearing twice in rpmsrate - handle a few case of packages appearing twice - special case for packages appearing in INSTALL section (flag dropped) - new special flag ALL for compssUsersChoice use new mkdir_p, rm_rf and cp_af from MDK::Common * services.pm, install2.pm, lang.pm, commands.pm, loopback.pm, tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm, network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm, any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new mkdir_p, rm_rf and cp_af from MDK::Common * diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly standalone) * devices.pm (make): ensure it never returns a non-absolute name (it happened with make("foo") when cwd=/dev and /dev/foo existed) 2001/09/16 siegel * share/po/help_xml2pm.pl: added "systemitem" added commet explainig that help.pm is automatically generated. * .cvsignore: added .*.sw? for vim users 2001/09/16 Till Kamppeter * printer.pm, printerdrake.pm: Added possibility to list command line options for the printers and to give the users help for printing Fixed bug of sometimes appearing the wron dialog after printing test pages 2001/09/15 Pixel * fs.pm: fix options appearing twice in fstab * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk installs) * install_steps_auto_install.pm (enteringStep): do not translate in ja|ko|zh 2001/09/15 Pixel * fs.pm: fix options appearing twice in fstab * install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk installs) * install_steps_auto_install.pm (enteringStep): do not translate in ja|ko|zh 2001/09/15 civileme * help.pm: Added a dialog in English for users selecting a printing system since no other OS seems to offer such a choice during install. 2001/09/15 dam's * standalone/draknet: better connection testing * network/tools.pm: more timeout * network/adsl.pm: avoid asking 2 times to restart the ethernet card * mouse.pm: readded darea realization 2001/09/15 Pablo Saratxaga * share/rpmsrate: make gtk-themes installed when Gnome is choosen * share/po/es.po: updated Spanish file * share/po/wa.po, share/po/hu.po: updated Hungarian file 2001/09/15 Pixel * Makefile.config, tools/Makefile: add aewm-drakx * install_steps_gtk.pm: makes cancel on mouse selection works even better - add and use aewm-drakx - add some "skip" title on help/logo/steps windows so that aewm-drakx know they don't need keyboard focus - add some more title to ease debugging (when aewm-drakx is in debug mode) * install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c, tools/aewm-drakx/README: - add and use aewm-drakx - add some "skip" title on help/logo/steps windows so that aewm-drakx know they don't need keyboard focus - add some more title to ease debugging (when aewm-drakx is in debug mode) * any.pm: i18n kdmrc fix user icons choice - add and use aewm-drakx - add some "skip" title on help/logo/steps windows so that aewm-drakx know they don't need keyboard focus - add some more title to ease debugging (when aewm-drakx is in debug mode) * install2.pm: don't warn if modules are missing when testing * bootloader.pm: find error in /tmp/.error only if exception is "xxx failed" (write_lilo_conf): ensure linear and lba32 are not both set * share/po/fake_c.pl: fix a tricky hack * my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no more keyboard focus) * c/stuff.pm: i18n kdmrc * lang.pm (load_mo): ensure the locale is set (was broken in non-gtk installs) * install_steps_interactive.pm: fix typo find error in /tmp/.error only if exception is "xxx failed" makes cancel on mouse selection works even better fix cancel on mouse choice * install_steps.pm: i18n kdmrc enable supermount again * network/adsl.pm: correct dams typo * fs.pm (write_fstab): fix supermount moving from options to fstype * steps.pm: find error in /tmp/.error only if exception is "xxx failed" * tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c, tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on new map_request event (fix summary step) - add and use aewm-drakx - add some "skip" title on help/logo/steps windows so that aewm-drakx know they don't need keyboard focus - add some more title to ease debugging (when aewm-drakx is in debug mode) * install_steps_auto_install.pm (enteringStep): do not translate in ja|ko|zh 2001/09/15 siegel * share/po/de.po: fixed another typo new string * printerdrake.pm: added missing _() * standalone/draksec: use " instead of ' to get i18n * standalone/draknet: fixed missing _() 2001/09/15 Till Kamppeter * printerdrake.pm: Added the PDQ panic button. Removed a superfluous "set_help" line. Save default spooler at program start, fixed typos in comments. Command line commands as "lpr", "lpq", ... are mapped to the correct spooler now. Fixed bug of a waiting message appearing together with a dialog Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type for a printer * printer.pm: Added the PDQ panic button. Command line commands as "lpr", "lpq", ... are mapped to the correct spooler now. * standalone/printerdrake: Fixed bug of spooler choice via command line options being ignored. 2001/09/15 warly * share/rpmsrate: add drakfirsttime 2001/09/14 dam's * printer.pm, printerdrake.pm: make test_pms happy * install_any.pm: pptp-adsl instead of pptp-adsl-fr * Xconfigurator.pm: no shadow when X test * standalone.pm: bugfix * my_gtk.pm: no icon if wizard no shadow when X test shadow color * bootlook.pm: bugfix iautologin correction * mouse.pm: trying to remove draw * network/adsl.pm: debug pptp-adsl instead of pptp-adsl-fr bugfix updated speedtouch handling. 2001/09/14 Franois Pons * install_steps.pm: removed S3 ViRGE card from card with problem with frame buffer as it works fine. * Xconfigurator.pm: fixed filtering of depth for newt version. depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as depth 32 simply doesn't work, even if DRI guide says it works :-) 24 bit works fine for Rage 128. apply restriction on depth available when changing resolution, removed S3 ViRGE from experimental 3D accelerated card list as it really does not work, allow on second pass to change card configuration to choose server (experimental server are still only available to expert), added support for UseCCEFor2D for Rage 128 card if a TV card is installed (set to true, else set to false), added support for Rage Mobility M... card that are Rage 128 Mobile chipset, improved error message display to catch only appropriate error message of XFree 4.1.0 only, added support for 32 bits for DRI using Matrox card, improved info message with real version of XFree used (anybody) and identifier from PCI probe (expert). 2001/09/14 Guillaume Cottenceau * mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target * mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using a reduced form of mkinitrd_helper for mkinitrd (only to provide a dietlibc-enabled static insmod) 2001/09/14 Pablo Saratxaga * share/po/wa.po: updated Walloon file * share/po/ko.po: updated Korean file * share/po/da.po: updated Danish file updated Danish file * share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files 2001/09/14 Pixel * partition_table_raw.pm, install_any.pm: when testing for bad drives, if opening for writing fails, remove the drive from the hard drive list (useful for Smartmedia readers) * pkgs.pm: update correctSize and invCorrectSize (now linear) * share/po/fr.po: fix odin bug (please run msgfmt before committing!) * share/rpmsrate: do not install Aurora in russian 2001/09/14 siegel * share/po/de.po: updates * standalone/drakautoinst: Check exisence of "/root/replay_install.img" before anything else ... 2001/09/14 Till Kamppeter * printerdrake.pm: Added "set_help" lines for installer help texts. Raw queue entry added, so cursor not always on "Alps MD-1000" when no printer detected. Resolved conflict. Now it is checked whether the network is configured and running. draknet is called when the network is not configured. It is checked whether the spooler is automatically started at boot. The oki4daemon is started when needed. Lexmarks inkjet drivers are fully integrated. The permissions of the device files are set so that normal users can print with PDQ. * standalone/printerdrake: Fixed spooler selection by command line. * printer.pm: Raw queue entry added, so cursor not always on "Alps MD-1000" when no printer detected. Made network checking working on non-english systems. Now it is checked whether the network is configured and running. draknet is called when the network is not configured. It is checked whether the spooler is automatically started at boot. The oki4daemon is started when needed. Lexmarks inkjet drivers are fully integrated. The permissions of the device files are set so that normal users can print with PDQ. 2001/09/14 Pablo Saratxaga * share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file 2001/09/13 Frederic Lepied * share/rpmsrate: added mt-st to ARCHIVING 2001/09/13 odin * share/po/fr.po: updated up to 6648 2001/09/13 Pixel * diskdrake_interactive.pm: new migration feature for creation of partitions on existing mount points * diskdrake.pm: - add back shortcuts - red colored buttons in nfs/smb/removable 2001/09/13 dam's * pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated * my_gtk.pm: updated addde /usr/share/icons in path for pixmaps search shadow reduced to 5 pixels * standalone/draknet, network/isdn.pm: isdn timeout works now. 2001/09/13 Frederic Lepied * share/rpmsrate: added mt-st to ARCHIVING 2001/09/13 Franois Pons * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes trouble to XFree86 4.1.0. * Xconfigurator.pm: fix for missing Xinerama for Matrox cards. fix for Matrox G550 support, now add DRI support. disable any question to user about XF3 if he choose a dual head configuration. disable DRI if Xinerama has been chosen. updated Rage Mobility regexp for bad_card, added bad_card for XF4 as Tseng ET6\d00. * install_any.pm: updates 3D category according Matrox G550 and Radeon card. * install_steps.pm: synced with Xconfigurator bad_card class of video card to avoid using frame buffer, added ET6\d00 style card which seems to have problem. 2001/09/13 odin * share/po/fr.po: updated up to 6648 updated fr.po 2001/09/13 Pixel * share/rpmsrate: add krozat * any.pm (inspect): use a safer dir when standalone * install_steps.pm: extend disable KDE GreetString to ja|ko|zh|ru|th|vi|be|bg do not translate kdm GreetString in ja|ko|zh (what about ru?) in kdmrc GreetString, magic string HOSTNAME replaced by %n * diskdrake_interactive.pm: new migration feature for creation of partitions on existing mount points * diskdrake.pm: - add back shortcuts - red colored buttons in nfs/smb/removable * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on the fly without rebooting on a device with some already mounted partitions) * install_steps_interactive.pm (selectKeyboard): don't prompt in newbie mode if >=90, not >90 2001/09/13 dam's * my_gtk.pm: shadow reduced to 5 pixels * standalone/draknet, network/isdn.pm: isdn timeout works now. 2001/09/13 Franois Pons * Xconfigurator.pm: fix for missing Xinerama for Matrox cards. fix for Matrox G550 support, now add DRI support. disable any question to user about XF3 if he choose a dual head configuration. disable DRI if Xinerama has been chosen. updated Rage Mobility regexp for bad_card, added bad_card for XF4 as Tseng ET6\d00. avoid creating /etc/X11/XF86Config* file if --g_auto_install. * services.pm: updated repartition of services into category, network category are commented so that service will to "Other" one. * Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes trouble to XFree86 4.1.0. * install_any.pm: updates 3D category according Matrox G550 and Radeon card. * install_steps.pm: synced with Xconfigurator bad_card class of video card to avoid using frame buffer, added ET6\d00 style card which seems to have problem. 2001/09/13 Pixel * keyboard.pm: filtered the list from lang2keyboard to display only valid keyboards * c/stuff.xs.pm: add partition adding on the fly trick * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on the fly without rebooting on a device with some already mounted partitions) * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what about ru?) in kdmrc GreetString, magic string HOSTNAME replaced by %n 2001/09/13 dam's * standalone/draknet, network/isdn.pm: isdn timeout works now. 2001/09/13 Franois Pons * lang.pm: fixed bad $localedir in load_mo(). * g_auto_install: updated so that this scripts is running again. * install2.pm: do not output error message for bad kernel if using --g_auto_install. * install_steps_interactive.pm: fixed Printer name reporting for a specific printer. * install_any.pm: updates 3D category according Matrox G550 and Radeon card. * services.pm: updated repartition of services into category, network category are commented so that service will to "Other" one. * live_install2: updated #! as ../perl is not used. * my_gtk.pm: synced with --g_auto_install mode. * install_steps.pm: synced with Xconfigurator bad_card class of video card to avoid using frame buffer, added ET6\d00 style card which seems to have problem. * Xconfigurator.pm: fix for Matrox G550 support, now add DRI support. disable any question to user about XF3 if he choose a dual head configuration. disable DRI if Xinerama has been chosen. updated Rage Mobility regexp for bad_card, added bad_card for XF4 as Tseng ET6\d00. avoid creating /etc/X11/XF86Config* file if --g_auto_install. synced with --g_auto_install mode. disable testing with all SiS card except SiS 630 under XF4. 2001/09/13 Pablo Saratxaga * share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po, share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po, share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/id.po: updated pot file 2001/09/13 Pixel * keyboard.pm: filtered the list from lang2keyboard to display only valid keyboards * c/stuff.xs.pm: add partition adding on the fly trick * partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on the fly without rebooting on a device with some already mounted partitions) * install2.pm (selectKeyboard): remove code causing install_steps::selectKeyboard to be skipped * install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what about ru?) in kdmrc GreetString, magic string HOSTNAME replaced by %n 2001/09/12 dam's * my_gtk.pm: typo new color for shadow corrected shadow handling no shadow if liveupdate * share/help.png: new help * mouse.pm: removed debug code * network/tools.pm, network/netconnect.pm, network/ethernet.pm, network/isdn.pm, network/adsl.pm, network/modem.pm: new default connection handling * standalone.pm: added wait message while installing package 2001/09/12 daouda * standalone/drakbug_report: add Mandrake release section 2001/09/12 fcrozat * share/rpmsrate: Fix gnome install 2001/09/12 Franois Pons * install2.pm: removed obsolete --nocpi flag for install2. avoid probing usb device (for mouse) if --noauto is given. * install_steps.pm: disabled frame buffer for most of the SiS display card except SiS 630. * Xconfigurator.pm: added MGA G550 as always having two head. * live_install2: fix when switching perl version. * live_install: use system perl instead. 2001/09/12 gbeauchesne * share/list.ia64, share/list, share/list.i386: - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to... - list.i386: ... Here. - list.ia64: Updates. 2001/09/12 odin * share/po/fr.po: updated fr.po 2001/09/12 Pablo Saratxaga * share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po, share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/it.po, share/po/af.po: updated pot file * help.pm: new version with [ and ] * lang.pm: commented out utf-8 russian locale, for now 2001/09/12 Pixel * standalone/lsnetdrake: fix typo added wonderful lsnetdrake * modules.pm, install2.pm: display error when the kernel mismatch the modules * docs/README: explain how to get the boot kernels * install_steps_gtk.pm (choosePackagesTree): translate the categories * standalone/drakbug_report: cleanup * bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels (suggest): no "quiet" boot for smp and enterprise kernels allow grub even for more than 800MB * Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake 2001/09/12 siegel * share/po/de.po: new & shiny verion * share/po/help_xml2pm.pl: fixed silly error added keycap patch 2001/09/12 dam's * my_gtk.pm: corrected shadow handling no shadow if liveupdate table undef corrected removed shadows if standalone * standalone/drakgw, standalone/draknet: corrected wizard mode in newt mode * mouse.pm: removed debug code * network/netconnect.pm: corrected splash in non X mode 2001/09/12 daouda * standalone/drakbug_report: add Mandrake release section 2001/09/12 Franois Pons * live_install2: fix when switching perl version. * live_install: use system perl instead. 2001/09/12 kjx * share/po/zh_CN.po: revison 2001/09/12 Pixel * docs/README: explain how to get the boot kernels * install_steps_gtk.pm (choosePackagesTree): translate the categories * standalone/drakbug_report: cleanup * bootloader.pm: allow grub even for more than 800MB 2001/09/11 dam's * network/netconnect.pm: removed useless print don't detect ethx if no autodetection. implement smarter checkboxes * mouse.pm: test updated mouse test worked * network/ethernet.pm: don't detect ethx if no autodetection. implement smarter checkboxes * pixmaps/arrow_down.xpm: pixmap corrected new arrows * pixmaps/arrow_up.xpm: new arrows * share/rpmsrate: added ibod added isdn-light * interactive_gtk.pm, my_gtk.pm: fear the shaped windows... 2001/09/11 Pablo Saratxaga * help.pm: small fix * share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po, share/po/it.po: updated Hungarian file; updated pot file 2001/09/11 Pixel * Makefile (tar-drakxtools): remove the building of "help" for drakxtools * bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not a primary partition (otherwise lilo dies) 2001/09/10 dam's * network/modem.pm, network/ethernet.pm: detect_devices * standalone/net_monitor, network/network.pm: removed timeout:1 in resolv.conf, modified timeout scanning in draknet/net_monitor * install_gtk.pm, install_steps_gtk.pm: mouse test moved * mouse.pm: test_mouse moved * my_gtk.pm: added border window decorations no set_events if embedded * standalone/draknet: removed timeout:1 in resolv.conf, modified timeout scanning in draknet/net_monitor debug * standalone/mousedrake: don't fork the code * network/adsl.pm: debug debug 2001/09/10 Franois Pons * install_any.pm: updated g_auto_install() for newer printerdrake interface. * modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into detect_devices::pcmcia_probe. * mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for blank.img floppy image. * install_steps_interactive.pm, mouse.pm: added hid type usb mouse support. * Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz, 1024x480 but not automatically used). 2001/09/10 Guillaume Cottenceau * share/rpmsrate: plop some adjustements in Games section 2001/09/10 Pablo Saratxaga * share/po/DrakX.pot, share/po/de.po: updated German file; added choice of various quotes in help_xml2pm.pl Updated pot file; removed translations that are too low on percentage. * share/po/zh_TW.po: updated Chinese file * share/po/ko.po: updated Korean file Updated pot file; removed translations that are too low on percentage. * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated pot file; removed translations that are too low on percentage. * share/po/help_xml2pm.pl: updated German file; added choice of various quotes in help_xml2pm.pl 2001/09/10 Pixel * interactive_gtk.pm, my_gtk.pm: - make diskdrake work in embedded mode - $my_gtk::pop_it used where it should * detect_devices.pm: fix ide-scsi appearing 2 times when standalone because both in /proc/ide and /proc/scsi/scsi * share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars - skip directories missing drakx-help.xml - convert to the right charset (taken from $lang.po) - rename help-*.po by help-*.pot - fix typo in script removing $lang.po translations to favour help-*.pot * diskdrake.pm: - make diskdrake work in embedded mode - $my_gtk::pop_it used where it should fix Umount and Mount when i18ned for nfs/smb don't display Wizard if wizard done before DrakX * share/po/Makefile, share/po/.cvsignore: - rename help-*.po by help-*.pot - fix typo in script removing $lang.po translations to favour help-*.pot 2001/09/10 siegel * share/po/de.po: updates 2001/09/10 Till Kamppeter * printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue modified to not get interactive when overwriting a file. Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be able to identify which PPD from /usr/share/cups/model was used (for auto-install). 2001/09/10 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated pot file; removed translations that are too low on percentage. 2001/09/10 Pixel * share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: - rename help-*.po by help-*.pot - fix typo in script removing $lang.po translations to favour help-*.pot 2001/09/09 Pixel * modules.pm: probeall handling 2001/09/09 Guillaume Cottenceau * install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue 2001/09/09 Pablo Saratxaga * share/po/tr.po: updated Turkish file * share/po/sv.po: updated Swedish file 2001/09/09 Pixel * install_any.pm (ejectCdrom): fix D state on exit * diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: - "Wizard" and "More" are back - allow "Use for loopback" when there is already a loopback - set the options on newly created partitions - recompute_loopbacks called after modification of loopbacks, no more before reading - restrict the lenght of the lines in partition description - make loopback work * interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm: clicked_may_quit used in place of clicked+exception to work-around perl-GTK bug (?) * share/po/i18n_compssUsers: ensure we're not adding a string already there (otherwise msgmerge yells) * share/po/help_xml2pm.pl, share/po/.cvsignore: xml help handling/enhancing for multi-langs * modules.pm: probeall handling (write_conf): switch to "probeall scsi_hostadapter ..." * share/po/Makefile: xml help handling/enhancing for multi-langs xml help handling/enhancing for multi-langs * partition_table.pm (get_normal_parts_and_holes): remove only small holes, not small partitions * fs.pm (set_default_options): remove iocharset=... for nfs (why was it there?) 2001/09/08 Guillaume Cottenceau * share/po/fr.po: fix some ortograf * share/rpmsrate: lvm not installed for everyone ?! 2001/09/08 Pixel * install_steps_auto_install.pm: force exitInstall to be non automatic * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm, diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback installs work again 2001/09/09 Pixel * modules.pm (write_conf): switch to "probeall scsi_hostadapter ..." 2001/09/08 Guillaume Cottenceau * share/po/fr.po: fix some ortograf * share/rpmsrate: lvm not installed for everyone ?! * modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't flush it when it didn't decide to put any modules in it (to leave user's modules) (2) it doesn't remove the last line (3) it uses stronger regexp'es for substitution to not remove modules that have names made of other modules names subsets 2001/09/08 Pablo Saratxaga * share/po/zh_TW.po: updated Chinese file 2001/09/08 Pixel * lang.pm: fix font in iso-15 * modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..." * interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak with nested subs) * share/diskdrake.rc: change name * install_steps_auto_install.pm: force exitInstall to be non automatic * install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm, diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback installs work again * timezone.pm: Asia/Taipei for Traditional Chinese * detect_devices.pm: remove debug code 2001/09/07 daouda * share/rpmsrate: add mdkonline (X 4) 2001/09/07 fcrozat * share/rpmsrate: Add grio500 2001/09/07 Franois Pons * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong result). fix all Matrox card used with XF4 which really does not like X in frame buffer (unable to restore frame buffer of DrakX). 2001/09/07 Guillaume Cottenceau * rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386, rescue/tree/etc/rc.sysinit: ext3, xfs, jfs * bootloader.pm: use -v for mkinitrd * share/po/fr.po: "reseaux" and plurals misc * share/rpmsrate: some work on games 2001/09/07 Pablo Saratxaga * share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files 2001/09/07 Pixel * Makefile: cleanup po * install_steps.pm: s|kdmrc|kdm/kdmrc| * lang.pm: fix load_mo call * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting disable_forced_fsck called for ext3 formatting (Type): disable fsck when migrated ext2->ext3 * fs.pm: disable_forced_fsck called for ext3 formatting 2001/09/07 siegel * share/po/de.po: updates 2001/09/07 Till Kamppeter * standalone/printerdrake, printer.pm, printerdrake.pm: Data structure fitted for auto-install to work Optimized program to be much faster Many more waiting messages Many bugfixes 2001/09/07 daouda * share/rpmsrate: add mdkonline (X 4) 2001/09/07 fcrozat * share/rpmsrate: Add grio500 2001/09/07 Franois Pons * Xconfigurator.pm: fix card managed only by XF4 (may have some wrong result). fix all Matrox card used with XF4 which really does not like X in frame buffer (unable to restore frame buffer of DrakX). 2001/09/07 Pablo Saratxaga * any.pm: Changed simple quote to double quote for a translatable string (otherwise it isn't seen) * share/po/es.po: updated Spanish file updated pot file * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file * share/po/sv.po: updated Swedish file updated pot file 2001/09/07 Pixel * install_steps.pm: s|kdmrc|kdm/kdmrc| remove the "konsole and gnome-terminal are lamers in exotic languages, link them to something better" * bootloader.pm (write_lilo_conf): fix typo * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help * diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting disable_forced_fsck called for ext3 formatting (Type): disable fsck when migrated ext2->ext3 * install_any.pm, keyboard.pm: cleanup * partition_table.pm, share/list: add xfs * fs.pm: disable_forced_fsck called for ext3 formatting * share/rpmsrate: add jfsprogs 2001/09/07 siegel * share/po/de.po: updates updates/fixes 2001/09/06 dam's * network/adsl.pm, network/tools.pm: corrected speedtouch * install_gtk.pm: removed comments 2001/09/06 Franois Pons * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using XFree 4.1.0 is not bad, and all NVIDIA card are no more considered bad. * pkgs.pm: fixed retry of package 3 times everytime even if first install succeeded, now after first successfull install, go to next package to install. * install_steps.pm: removed some cards for allowing frame buffer. 2001/09/06 Guillaume Cottenceau * standalone/drakgw: works now ;p 2001/09/06 Pablo Saratxaga * lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX corrected lang.pm to have coherence in locale usage (it was the source of much of the problems); changed keyboard.pm to ignore charset encoding in locale name for locale -> keyboard guessing. removed unused gconv modules, converted az.po to utf-8 (as it was the only remaining az.po on Earth still in a non standard encoding) * share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2, keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in locale usage (it was the source of much of the problems); changed keyboard.pm to ignore charset encoding in locale name for locale -> keyboard guessing. removed unused gconv modules, converted az.po to utf-8 (as it was the only remaining az.po on Earth still in a non standard encoding) 2001/09/06 Pixel * install2.pm: fix keyboard config + some cleanup cleanup (use /proc/self instead of /proc/$$) * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix keyboard config + some cleanup 2001/09/06 dam's * network/adsl.pm, network/tools.pm: corrected speedtouch * install_gtk.pm: removed comments 2001/09/06 Franois Pons * Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using XFree 4.1.0 is not bad, and all NVIDIA card are no more considered bad. avoid using @resolutions_laptop, now use only @resolutions, this means 1400x1050 is available to other, use XFree86 4.1.0 builtin timings for 1400x1050 (so 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration file). * install_steps.pm: removed some cards for allowing frame buffer. fix log when configuring printer queue. * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres. cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050 and 1920x1440, 2048x1536 has no modeline (but its min hsync is really high). * pkgs.pm: fixed retry of package 3 times everytime even if first install succeeded, now after first successfull install, go to next package to install. * install_any.pm: update printer data for g_auto_install. 2001/09/06 Guillaume Cottenceau * standalone/drakgw: works now ;p 2001/09/06 Pixel * install2.pm: fix keyboard config + some cleanup cleanup (use /proc/self instead of /proc/$$) * install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix keyboard config + some cleanup * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the type 2001/09/06 dam's * network/adsl.pm, network/tools.pm: corrected speedtouch * install_gtk.pm: removed comments new mouse test 2001/09/06 Franois Pons * pkgs.pm: revert previous patch, this is not usable with current rpm as it complains if one the file has a modified MD5SUM against the header describing it in the hdlist, so this is most of the time useless. guess filename if the file is not found (for an rpm file during installation), so try with release incremented in such case (good for Cooker user or local tester using network installation). * install_steps.pm: fix log when configuring printer queue. * Xconfigurator.pm: avoid using @resolutions_laptop, now use only @resolutions, this means 1400x1050 is available to other, use XFree86 4.1.0 builtin timings for 1400x1050 (so 1400x1050 is no more printed as modeline for XFree 4.1.0 configuration file). * Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres. cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050 and 1920x1440, 2048x1536 has no modeline (but its min hsync is really high). * install_any.pm: update printer data for g_auto_install. * printerdrake.pm: revert previous commit. added a missing ifup lo, on some case (auto_install) it fails. * printer.pm: start ifup lo before starting service cups. 2001/09/06 Pablo Saratxaga * share/po/da.po: updated Danish file * share/po/ga.po, share/po/no.po: updated Irish and Norwegian files 2001/09/06 Pixel * share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend, fix the use * diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names * fs.pm (merge_fstabs): correction allowing manual_fstab to not give the type * timezone.pm (ntp_server): fix (step-tickers was empty) 2001/09/05 dam's * standalone/net_monitor, standalone/draknet: corrected opeions * standalone/mousedrake: typo updated * network/tools.pm: corrected initcript * pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm, pixmaps/mouse_left.xpm: new pixmaps 2001/09/05 Pixel * standalone/diskdrake: fix function called 2001/09/05 Till Kamppeter * printer.pm, printerdrake.pm: Set default printer (all spoolers), manual config (CUPS), bugfixes, clean-ups. 2001/09/05 dam's * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png, pixmaps/wiz_drakgw.png: new icons * share/themes-mdk.rc: updated theme * standalone/draknet: interface display corrected * share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons * install_gtk.pm: 2 sec without sensitives buttons * network/netconnect.pm: only if standalone * pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png, pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png, pixmaps/bootdisk.png: new pixmaps 2001/09/05 Franois Pons * Xconfigurator.pm: fixed display of XFdrake test image (fcrozat). * install_steps.pm: fixed typo preventing removable devices to be seen in /etc/fstab. fixed configurePrinter (used for auto_install). * install_steps_interactive.pm: avoid asking when using existing partition for magic partition with a real mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so partition is not unmountable). * bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown lilo. * fs.pm: fix bad creation of /mnt/hd for an hd installation without ramdisk. support setting /tmp/hdimage in /etc/fstab even if memory is low (not using ramdisk). * install_any.pm: filtering $o->{printer} for g_auto_install(). allow installing urpmi on hd install even if low memory (so not using ramdisk). * diskdrake_interactive.pm: Do not use for loopback of magic partition (/tmp/hdimage). 2001/09/05 Guillaume Cottenceau * tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1 2001/09/05 Pablo Saratxaga * share/po/bs.po: updated Bosnian file * share/po/uk.po: updated Ukrainian file 2001/09/05 Pixel * Xconfigurator.pm: use EISA_ID in more cases to have the name non-case dependent EISA comparison also try EISA ID to auto-detect the monitor (sometimes the EISA ID is there, but not the [hv]syncrange * Xconfig.pm: fix typos non-case dependent EISA comparison also try EISA ID to auto-detect the monitor (sometimes the EISA ID is there, but not the [hv]syncrange * modules.pm: favor tmscsim over AM53C974 * tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info also try EISA ID to auto-detect the monitor (sometimes the EISA ID is there, but not the [hv]syncrange * standalone/diskdrake: fix function called 2001/09/04 Guillaume Cottenceau * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-( 2001/09/04 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: Updated Danish file; updated pot file 2001/09/04 Pixel * fs.pm: fix typo 2001/09/04 Till Kamppeter * printer.pm, printerdrake.pm: Fitted to the new Foomatic version. Fixed bug of spooler change only working when language is English. 2001/09/04 Franois Pons * install_steps.pm: fix bad vga= which go for some install. 2001/09/04 Guillaume Cottenceau * network/netconnect.pm: small english change * mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff * share/rpmsrate: tetex-doc * mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-( 2001/09/04 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: Updated Danish file; updated pot file * share/po/ja.po: updated Japanese file 2001/09/04 Pixel * modules.pm (add_alias): use "above" instead of "post-install" * partition_table.pm: re-add JFS * fsedit.pm, common.pm, bootloader.pm: - don't expand symlinks in grub's menu.lst - better use of /proc/partitions verification * detect_devices.pm (getCompaqSmartArray): add yet another location for cpqarray location * fs.pm: fix typo mount ext3 as ext2 during install for speed up 2001/09/04 fcrozat * share/rpmsrate: Add plugins for KDE and Mozilla 2001/09/04 Franois Pons * install_steps.pm: fix bad vga= which go for some install. * pkgs.pm: cleanup to avoid invalid file error. 2001/09/04 Pixel * modules.pm (add_alias): use "above" instead of "post-install" * fs.pm: mount ext3 as ext2 during install for speed up * partition_table.pm: re-add JFS * fsedit.pm, common.pm, bootloader.pm: - don't expand symlinks in grub's menu.lst - better use of /proc/partitions verification * detect_devices.pm (getCompaqSmartArray): add yet another location for cpqarray location 2001/09/04 yduret * my_gtk.pm: emebedded mode fix * interactive_gtk.pm, diskdrake.pm: embedded mode fix 2001/09/03 Guillaume Cottenceau * share/po/fr.po: unfuzzy-ise a few things, translate a few things 2001/09/03 Pablo Saratxaga * share/po/ko.po: updated Korean file 2001/09/03 Pixel * fs.pm: fix for lvm (non-)creation of devices 2001/09/03 yduret * my_gtk.pm, diskdrake.pm: fix Embedded mode 2001/09/03 dam's * network/network.pm: added timeout in resolv.conf 2001/09/03 Franois Pons * install_any.pm: updated to use new urpmi.cfg format for install_urpmi, make sure the directory is not given for ftp and http install ($dir). * Xconfigurator_consts.pm: added 1920x1440 and 2048x1536. * Xconfig.pm: make sure a staling Mouse2 is not present unless it really physically exists. 2001/09/03 Guillaume Cottenceau * modules.pm: add axnet_cs to pcmcia category * mdk-stage1/probing.c: change `scd' with `sr' 2001/09/03 Pablo Saratxaga * share/po/es.po: updated Spanish file * share/po/ko.po: updated Korean file 2001/09/03 Pixel * timezone.pm (ntp_server): also set /etc/ntp/step-tickers * fsedit.pm, devices.pm: fix mtab reading and pseudo-device use * interactive_gtk.pm: better sizing for combo boxes * install_steps_interactive.pm (choosePartitionsToFormat): do not propose to propose already formatted fat partitions * share/list: those files disappeared ?? * fs.pm: fix for lvm (non-)creation of devices (set_default_options): created fix mtab reading and pseudo-device use * diskdrake.pm (smb_create, nfs_create): make the "New" button work (raw_hd_mount_point): fix checking the same mount point (try_): fix error displaying * partition_table.pm: fix switching to 0x85 extended when remove_empty_extended is called 2001/09/03 yduret * standalone/net_monitor: sync with new logdrake command line options 2001/09/02 Pablo Saratxaga * share/po/bs.po: updated bosnian file Added Bosnian file 2001/09/01 Franois Pons * pkgs.pm: avoid deleting package from %packages in install() when closing fd associated, if the open is called again (?), it will cause an invalid file (seems to happens on some invalid file). 2001/08/31 dam's * standalone/draksec: corrected yesno interpretation libsafe modification * network/netconnect.pm: corrected profil recording for modem * standalone/net_monitor: correted typo * network/ethernet.pm: corrected zero return when cable configuring * any.pm: corrected autologin : no uc anymore * network/modem.pm: added domainname2 setting * share/logo-mandrake.png: new logo 2001/08/31 Franois Pons * Xconfigurator.pm: added missing AlwaysCore line for second mouse for XF3. * mouse.pm: added missing AlwaysCore line for second mouse in XF3. * standalone.pm: add option --allow-medium-change to force asking question even if --auto is given on command line of urpmi, for installing package so that a dialog appears. 2001/08/31 Guillaume Cottenceau * share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES section have "numlock" in INSTALL because it's the only package which goes to CD#2 when you unselect all groups, so having it here will allow not changing CD with this kind of small install 2001/08/31 Pablo Saratxaga * share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian and Spanish files * share/po/sv.po: updated Swedish file updated Ukrainian and Spanish files 2001/08/31 siegel * share/help_sav.png: not used any more * share/po/de.po: updates * share/logo-mandrake2.png, share/logo-mandrake_trans.png, share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old versions => not in use any more 2001/08/31 yduret * bootlook.pm: updated code 2001/08/30 dam's * network/tools.pm: nicer display * standalone/draknet: added use common.pm (can be usefull, eh?) * network/network.pm: silently /sbin/ip track_network_id only if laptop 2001/08/30 Pablo Saratxaga * share/po/da.po: Updated Danishfile updated pot file (I had lost the group descriptions, sorry, they are back now) moved chinese files to charset independent names * share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I had lost the group descriptions, sorry, they are back now) moved chinese files to charset independent names 2001/08/30 Pixel * lang.pm (read): it works now * help.pm: fixed (was utf8) * install_steps_gtk.pm (new): call interactive_gtk::new * install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial mouse) before service choice * pkgs.pm (naughtyServers): update for 8.1 2001/08/30 dam's * interactive.pm: corrected icon display * my_gtk.pm: new wizard * interactive_gtk.pm: corrected wizard mode display height/width * standalone/draknet: added draknet client installation * network/network.pm: track_network_id only if laptop dhcp package installation * pixmaps/wiz_default_left.png: new logo 2001/08/30 Franois Pons * mouse.pm: make sure to update all symlink according to any mouse (max 2) probed. fix previous fixes on mouse::write_conf * standalone/mousedrake: fix previous fix (typo). keep mouse specific paramater if user does not change its mouse. make sure --auto is not interactive on some part. use default value for port device if a serial mouse. * printer.pm: fixed foomatic failed (no lo up since ifup lo don't run) * Makefile: ugly to make sure standalone/pixmaps is not here when building tar-drakxtools. * Xconfig.pm: when reading existing configuration for mouse, update type|name for second mouse too. make sure default to set 3 for nbuttons for getinfoFromXF86Config for second mouse if this mouse has 3 buttons. * Xconfigurator.pm: for single heads mode, no screen id should be set in file (or XFree is going mad, but he is right, no ?) * install_any.pm: if a medium is refused, get rid of it definitively until it is accepted again. 2001/08/30 Guillaume Cottenceau * install_steps_interactive.pm: have a wait_message during installation of bootloader * mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28 2001/08/30 Pablo Saratxaga * share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese, Spanish and Vietnamese files 2001/08/30 Pixel * diskdrake_interactive.pm: allow LVM on RAID * help.pm: fixed (was utf8) * any.pm: cleanup * pkgs.pm (naughtyServers): update for 8.1 * lang.pm (read): it works now * fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if removable media * share/po/Makefile: fix utf8 translation of xml file * interactive_gtk.pm: fix&cleanup window size * tools/Makefile: cleanup unneeded stuff 2001/08/30 siegel * share/po/de.po: new german version 2001/08/30 warly * share/rpmsrate: add koffice-i18n diald vlan-utils 2001/08/29 Guillaume Cottenceau * standalone/drakgw, standalone/drakautoinst: quit_global * share/po/fr.po: minor fix 2001/08/29 Pixel * install_steps_interactive.pm: fix language selection * c.pm: better error message when function c::foo() is missing * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev in /) 2001/08/29 Franois Pons * pkgs.pm: fixed if undef encountered in depslist when installing package (traversing depslist as $depOrder). 2001/08/29 Guillaume Cottenceau * standalone/drakgw, standalone/drakautoinst: quit_global * share/po/fr.po: minor fix 2001/08/29 Pixel * install_steps_interactive.pm: fix language selection * c.pm: better error message when function c::foo() is missing * install_steps_gtk.pm (installPackages): have Ok button by default for asking for changing CD * bootloader.pm (mkbootdisk): cleanup * rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev in /) * devices.pm: remove fd0H1440 and fd1H1440 * modules.pm: remove "msdos" 2001/08/29 Franois Pons * mouse.pm: improved write_conf to enable multi-mice if only once mice is already defined. * standalone/mousedrake: try to merge already existing mouse configuration with what has been probed, change if mouse is really changed as probe is incomplete. * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters. * pkgs.pm: fixed if undef encountered in depslist when installing package (traversing depslist as $depOrder). 2001/08/29 Guillaume Cottenceau * standalone/drakgw, standalone/drakautoinst: quit_global * share/po/fr.po: minor fix 2001/08/29 Pixel * c.pm: better error message when function c::foo() is missing * keyboard.pm (loadkeys_files): fixed * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm, Makefile.config: add localedrake (not tested) * rescue/make_rescue_img: make it work (do not have the dev in /) cleanup, speedup, use mknod for devices * install_steps_gtk.pm (installPackages): have Ok button by default for asking for changing CD * rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices * bootloader.pm (mkbootdisk): cleanup * rescue/dirs: make it work (do not have the dev in /) * devices.pm: remove fd0H1440 and fd1H1440 * modules.pm: remove "msdos" 2001/08/29 dam's * network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch configuration 2001/08/29 Franois Pons * mouse.pm: improved write_conf to enable multi-mice if only once mice is already defined. * install_steps.pm: add support for mandatory frame buffer support (SiS 630) need them for XF3 to work properly, XF4 does work with it nicely. * Xconfigurator.pm: make sure Port entry for wacom is placed first. * standalone/mousedrake: try to merge already existing mouse configuration with what has been probed, change if mouse is really changed as probe is incomplete. * Xconfig.pm: improve getinfoFromXF86Config for mouse parameters. 2001/08/29 Guillaume Cottenceau * share/rpmsrate: games 2001/08/29 Pablo Saratxaga * share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file 2001/08/29 Pixel * fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle symlinks device and devfs devices * install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm, Makefile.config: add localedrake (not tested) * install_steps.pm: no need to have devfs=nomount anymore in root raid do not modify fstab options in upgrade * keyboard.pm (loadkeys_files): fixed fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup * diskdrake_interactive.pm: try to better handle symlinks device and devfs devices (main): fix (Create): fix typo causing primaryOrExtended to be ignored * rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup, speedup, use mknod for devices * c/stuff.xs.pm, detect_devices.pm: better floppy detection/info 2001/08/28 dam's * interactive.pm, install2.pm: corrected icon handling * services.pm: added cupslpd in printing section 2001/08/28 Franois Pons * Makefile.config: really fix typo... fixed typo. 2001/08/28 Pablo Saratxaga * share/po/cs.po: updated Czech file 2001/08/28 Pixel * install_any.pm: remove the temporary file /tmp/autoinst.img * install_steps.pm, install_steps_interactive.pm: propose to format / and /usr even if isFormatted. More generally do not trust isFormatted to show which partitions to format 2001/08/28 siegel * ChangeLog, keyboard.pm: - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard if no laptop is detected (= give users the chance to know about the existence of this variable). 2001/08/28 yduret * standalone/diskdrake: embedded mode nicer 2001/08/28 dam's * interactive.pm, install2.pm: corrected icon handling 2001/08/28 Franois Pons * share/list: added /sbin/e2fsck * share/aliases: added fsck.ext2 -> e2fsck (now in list file) removed e2fsck.shared as e2fsprogs now provide a shared version instead of a static one. * Makefile.config: really fix typo... fixed typo. removed reference to e2fsck.shared (now use e2fsck from package which is shared since 1.23-2mdk). 2001/08/28 Pixel * install_any.pm: remove the temporary file /tmp/autoinst.img 2001/08/28 siegel * ChangeLog, keyboard.pm: - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard if no laptop is detected (= give users the chance to know about the existence of this variable). 2001/08/28 yduret * standalone/diskdrake: embedded mode nicer 2001/08/28 Stefan Siegel * keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard if no laptop is detected (= give users the chance to know about the existence of this variable). 2001/08/28 dam's * mouse.pm: typo 2001/08/28 Pixel * install_steps_interactive.pm: default the licence agreement to "Refuse" * standalone/drakboot: security fix and various move to all_hds stuff * c/stuff.xs.pm, bootloader.pm: security fix and various 2001/08/28 warly * share/rpmsrate: move libsafe to SERVER_OTHER 2 added prelude, libsafe... 2001/08/28 yduret * standalone/drakxconf: readded dsikdrake added new items, remove some old ones 2001/08/27 dam's * network/network.pm: corrected hwaddr setting and draknet first window display corrected typo * network/netconnect.pm: corrected hwaddr setting and draknet first window display 2001/08/27 dam's * network/network.pm: corrected hwaddr setting and draknet first window display corrected typo * network/netconnect.pm: corrected hwaddr setting and draknet first window display 2001/08/27 Pablo Saratxaga * share/po/sk.po, share/po/eu.po: updated Basque and slovak files 2001/08/27 Pixel * install_steps_gtk.pm: nicer help display * share/keyboards.tar.bz2: fix the rights * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC 2001/08/27 dam's * network/netconnect.pm: corrected bad window size * network/network.pm: make it compile corrected hwaddr stuff added HWADDR * network/tools.pm: corrected internet initscript * any.pm, mouse.pm: make it compile add_devfslink 2001/08/27 Pablo Saratxaga * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list. Added Latvian keyboard * share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX * share/po/sk.po, share/po/eu.po: updated Basque and slovak files 2001/08/27 Pixel * install_steps_gtk.pm: nicer help display * diskdrake.pm: use empty hash instead of the raid/loopback array * c/stuff.xs.pm (setlocale): do not set LC_NUMERIC 2001/08/27 dam's * network/netconnect.pm: corrected bad window size * network/network.pm: added HWADDR * network/tools.pm: corrected internet initscript 2001/08/27 Franois Pons * any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej patch to support CHAP again. 2001/08/27 Pablo Saratxaga * lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list. Added Latvian keyboard 2001/08/27 Pixel * diskdrake.pm: use empty hash instead of the raid/loopback array 2001/08/26 warly * share/rpmsrate: add some important packages 2001/08/26 Guillaume Cottenceau * standalone/drakautoinst: require -> use * install_any.pm: save the .img file so that multi-cd install won't ask to re-enter first cd 2001/08/26 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2001/08/26 Pixel * share/po/Makefile, share/po/.cvsignore: fetch directly the latest drakx-help.xml 2001/08/25 Pixel * standalone/drakbug_report: add "rpm -qa" * bootlook.pm: fix deprecated call standalone::pkgs_install * diskdrake.pm: don't the grab flag propagate everywhere 2001/08/25 dam's * install2.pm, steps.pm: icon correction 2001/08/25 Pixel * fs.pm (mount): accept mounting iso9660 filesystem as it should be (write_fstab): enable mounting more than one swap :) * bootlook.pm: fix deprecated call standalone::pkgs_install * install_steps.pm: added the missing security parameter to set_default_options * diskdrake.pm: don't the grab flag propagate everywhere 2001/08/24 dam's * pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm, pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal pix * standalone/mousedrake: updated mouse test 2001/08/24 Guillaume Cottenceau * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the uncompressing of ramdisk will rulz now * mdk-stage1/network.c: allow unsetting of automatic mode if not enough parameter provided in network steps * mdk-stage1/probing.c: - descr of proc files - fix small typo (segfault or not segfault? that's the question) enable install from Compaq Smart Array * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather than gcc statically * mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart Array 2001/08/24 Pixel * tools/pcmcia_config.patch: update the patch * Makefile (test_pms): make perl_checker skip help.pm ensure no .orig are generated when the pcmcia patch is applied * tools/make_mdkinst_stage2: give a little more free space (esp. for russian lang) * lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE * share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates help.pm from xml doc done by doc team 2001/08/24 dam's * network/adsl.pm: bugfix, speedtouch help * standalone/mousedrake: updated mouse test 2001/08/24 Franois Pons * install_steps.pm: fixed possible bug (not sorted partition when calling mount_part). * install_any.pm: fixed hdInstallPath for an hd installation without usingRamdisk (not installing urpmi in such case). updated packages to copy for printerdrake, removed almost obsoletes XFree86 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16, 3DLabs) which means user will have to change CD back to CD#1 if he a such a card. removed obsolete code for cond_remount and cond_umount and update hdInstallPath for hd installation. * diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of common::useRamdisk(). take care mount point action is available for the hd installation partition only if a ramdisk is used (as it can be unmounted). use more global isMagicPart instead of isInstallHdPart. added real_mntpoint documentation and take care of hd install partition for available actions. * fs.pm: take care of using ram disk to remap mntpoint of hd installation partition. fixed partition never seen as mounted, added special case for real_mntpoint to remount magic partition on the right place. 2001/08/24 Guillaume Cottenceau * mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the uncompressing of ramdisk will rulz now * mdk-stage1/automatic.c: revert my auto->interactive patch * mdk-stage1/network.c: allow unsetting of automatic mode if not enough parameter provided in network steps * mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather than gcc statically * mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable install from Compaq Smart Array 2001/08/24 Pablo Saratxaga * share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm: enabling euro and utf-8 for some languages; added unicode font 2001/08/24 Pixel * install_steps.pm: remove the cond_umount_hdimage and cond_remount_hdimage * tools/pcmcia_config.patch: update the patch * lang.pm: no need for UTF-8/LC_CTYPE (load_mo): if not usingRamdisk, don't try getFile * diskdrake_interactive.pm: remove the cond_umount_hdimage and cond_remount_hdimage (Done): do not write fstab nor ask about it in install * fs.pm (mount): allow to mount 'proc' and 'usbdevfs' * Makefile: ensure no .orig are generated when the pcmcia patch is applied * partition_table.pm (write): do not die when real_mntpoint fs fail to unmount/remount, just log (write): unmount+remount real_mntpoint before doing the kernel_read * share/gen_locales.sh: no need for UTF-8/LC_CTYPE * pkgs.pm: fix "invalid file" 2001/08/24 dam's * network/netconnect.pm: speedtouch configuration * my_gtk.pm: gtk_create_xpm handles no absolute xpm path * pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm: added new mouse pixmap for mousedrake * network/adsl.pm: bugfix, speedtouch help added aliases for speedtouch stuff speedtouch configuration removed adsl detectioin, once again. * standalone/mousedrake: no absolute pixmap reference new mousedrake. experimental * network/tools.pm: speedtouch configuration export write_initscript, correct initscript. 2001/08/24 Franois Pons * install_steps.pm: fixed possible bug (not sorted partition when calling mount_part). * diskdrake_interactive.pm: take care mount point action is available for the hd installation partition only if a ramdisk is used (as it can be unmounted). use more global isMagicPart instead of isInstallHdPart. added real_mntpoint documentation and take care of hd install partition for available actions. * install_any.pm: fixed hdInstallPath for an hd installation without usingRamdisk (not installing urpmi in such case). updated packages to copy for printerdrake, removed almost obsoletes XFree86 3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16, 3DLabs) which means user will have to change CD back to CD#1 if he a such a card. removed obsolete code for cond_remount and cond_umount and update hdInstallPath for hd installation. * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2, mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures and updated documentation. * fs.pm: take care of using ram disk to remap mntpoint of hd installation partition. fixed partition never seen as mounted, added special case for real_mntpoint to remount magic partition on the right place. 2001/08/24 Pixel * partition_table.pm (write): do not die when real_mntpoint fs fail to unmount/remount, just log (write): unmount+remount real_mntpoint before doing the kernel_read * install_steps.pm: remove the cond_umount_hdimage and cond_remount_hdimage * diskdrake_interactive.pm: remove the cond_umount_hdimage and cond_remount_hdimage (Done): do not write fstab nor ask about it in install * lang.pm (load_mo): if not usingRamdisk, don't try getFile * fs.pm (mount): allow to mount 'proc' and 'usbdevfs' 2001/08/24 siegel * share/po/de.po: New & shiny german version 2001/08/23 Pablo Saratxaga * share/po/no.po: updated Norwegian file * share/po/el.po: updated Greek file 2001/08/23 Pablo Saratxaga * share/po/no.po: updated Norwegian file 2001/08/23 dam's * network/netconnect.pm: at_boot connection,resolvconf in profiles * standalone/draksec: addedlibsafe option * network/adsl.pm: restart network after having tested adsl. experimental 2001/08/23 Franois Pons * install_steps_gtk.pm: removed unusefull greping when building package tree. 2001/08/23 Guillaume Cottenceau * share/rpmsrate: work on GAMES section 2001/08/23 Pablo Saratxaga * share/po/lv.po: updated Latvian file 2001/08/23 Pixel * install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not using ramdisk (disable_user_view): damned kdmrc moved * diskdrake_interactive.pm: cancel at startup will now exit ask wether to save fstab (part_possible_actions): have "Mount point" first to please fpons * fs.pm: keep the freq&passno of /etc/fstab * tools/i386/netboot/menu.lst.example, tools/i386/netboot/make_boot_network, tools/i386/netboot/automatic.para.default: as we now have menu.lst.example, i remove automatic.para for more flexibility * lang.pm: fix locale support when usingRamdisk 2001/08/22 anoncvs * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming Updated chinese (simplied) translation. 2001/08/22 Pixel * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R * network/nfs.pm: pleac perl_checker * interactive_gtk.pm: more intelligent setting back the selected value in the clist and ctree (done already for entry) - fix entries editing causing the cursor to go to the end of line - select the text * c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is closed and rpmlib tries to write in it and ... 2001/08/22 anoncvs * share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming Updated chinese (simplied) translation. 2001/08/22 fabman * share/po/es.po: updated spanish .po files for DrakX and drakbootdisk 2001/08/22 Guillaume Cottenceau * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when entries are not given * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c, mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h, mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all but ramdisk Read Only 2001/08/22 Pixel * share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R * bootlook.pm: fix typo * network/nfs.pm: pleac perl_checker * install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed and rpmlib tries to write in it and ... do not call configurePrinter if no printer is wanted * interactive_gtk.pm: more intelligent setting back the selected value in the clist and ctree (done already for entry) - fix entries editing causing the cursor to go to the end of line - select the text * c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is closed and rpmlib tries to write in it and ... 2001/08/22 Franois Pons * printerdrake.pm: fixed int and float checking which should accept negative number (added explicit positive too), cleaned code for some perl idioms. * install_steps.pm: updated configurePrinter to use foomatic printer configuration. 2001/08/22 Guillaume Cottenceau * mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when entries are not given * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c, mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h, mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all but ramdisk Read Only 2001/08/22 kjx * share/po/zh_CN.GB2312.po: review review 2001/08/22 Pixel * bootlook.pm: fix typo * install_steps_auto_install.pm: don't have formatPartitions interactive by default * install_steps.pm: do not call configurePrinter if no printer is wanted 2001/08/22 siegel * share/po/de.po: new german version 2001/08/21 dam's * Makefile: added rpcinfo to the tar corrected bad Makefile : rpcinfo-flushed.c comes from tools. * standalone/draknet: ergonomy correction * network/tools.pm: corrected qq bug corrected bug * standalone/net_monitor: log updatede removed memoty leak time connection label 2001/08/21 Franois Pons * install_steps_interactive.pm: moved installation code of foomatic (only) if a printer may be chosen. * install_any.pm: fixed hd installation for urpmi. * printerdrake.pm: slight rewrite of some perl idioms. 2001/08/21 Pablo Saratxaga * share/po/wa.po: updated Walloon file updated pot file * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2001/08/21 Pixel * share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5 * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd install * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot * fs.pm (read_fstab): don't expand symlink if the link goes in a directory * install_any.pm: cleanup * install_steps_interactive.pm: fix '$' in i18n message 2001/08/21 siegel * share/po/de.po: new german version 2001/08/21 dam's * standalone/net_monitor: removed memoty leak time connection label * network/tools.pm, network/modem.pm, network/netconnect.pm, network/ethernet.pm, network/isdn.pm: generik internet initscript, planq the children again * network/adsl.pm: speedtouch config generik internet initscript, planq the children again 2001/08/21 Franois Pons * install_any.pm: fixed hd installation for urpmi. 2001/08/21 kjx * share/po/zh_CN.GB2312.po: review 2001/08/21 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2001/08/21 Pixel * Xconfigurator.pm: fix spelling error * install_any.pm: cleanup install hotplug if usb (i kept usbd just in case) * diskdrake_interactive.pm (Create): force no sorting on filesystems, editable mount points * install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd install * Makefile, share/po/Makefile: check presence of '$' in DrakX.pot * install_steps_interactive.pm: fix '$' in i18n message * fs.pm (read_fstab): don't expand symlink if the link goes in a directory umask=0 only if security level < 3 2001/08/20 Guillaume Cottenceau * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was nowhere) 2001/08/20 Pixel * fs.pm: basic nfs handling in drakx fix bug 4257 * detect_devices.pm (raidAutoStart): fix for when kmod is there * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat with devfs * diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder to umount /tmp/hdimage only when needed * Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm, tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in drakx 2001/08/20 Guillaume Cottenceau * share/compssUsers: Have NETWORKING_DNS in "Internet station" (was nowhere) 2001/08/20 Pixel * Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request of Alex Hulse on cooker) * detect_devices.pm (raidAutoStart): fix for when kmod is there * diskdrake.pm: remove test code * fs.pm: fix bug 4257 * fsedit.pm: try a stronger matching technique for parsing /proc/mdstat with devfs * install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder to umount /tmp/hdimage only when needed * interactive_gtk.pm (wait_message_nextW): fix previous text == new text causing no expose_event causing dead loop 2001/08/19 Pixel * diskdrake_interactive.pm: save fstab on exit * fsedit.pm: various typos fix * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk make the devfs= mount or nomount choice based on raid-based root work * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk fix diskdrake requiring gtk add some test code * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk various typos fix * install_steps_interactive.pm, common.pm, install2.pm, install_any.pm, lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk 2001/08/19 Pixel * diskdrake.pm: major fs.pm rework + adaptation to it don't show nfs/smb/removable in install basic smb handling * network/smb.pm: basic smb handling * install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk make the devfs= mount or nomount choice based on raid-based root work disable supermount for the moment major fs.pm rework + adaptation to it * install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk simplify * standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk fix diskdrake requiring gtk add some test code major fs.pm rework + adaptation to it * install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk major fs.pm rework + adaptation to it * partition_table.pm: remove JFS from @important_types (too broken for the moment) remove isSupermount (was unused) * common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk * interactive_gtk.pm (create_ctree): fix focusing (the assumption number of leaves = number of lines is dumb) * fsedit.pm: various typos fix major fs.pm rework + adaptation to it * bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it * fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are removed unless we're in ramdisk various typos fix major fs.pm rework + adaptation to it cleanup basic smb handling * diskdrake_interactive.pm: save fstab on exit major fs.pm rework + adaptation to it 2001/08/18 Pixel * fs.pm: basic nfs/smb handling in diskdrake fixes and function prototype removing * diskdrake.pm: basic nfs/smb handling in diskdrake nicer mount options code (for autofs and supermount) * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount * interactive_gtk.pm: fix bug in box's height use * partition_table.pm, any.pm: fixes and function prototype removing * interactive.pm: readd the sorting based on size when no sorting is precised * my_gtk.pm (n_line_size): bigger spacing for 'various' * standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb handling in diskdrake 2001/08/18 Pixel * my_gtk.pm (n_line_size): bigger spacing for 'various' enhance look, fix ask_fileW * fs.pm: basic nfs/smb handling in diskdrake fixes and function prototype removing (write_fstab): add notail for reiserfs partitions in any case cleanup mounting options parsing * diskdrake.pm: basic nfs/smb handling in diskdrake nicer mount options code (for autofs and supermount) big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ cleanup mounting options parsing * raid.pm: update the raid size as it should be * diskdrake_interactive.pm: basic nfs/smb handling in diskdrake less verbose resize_reiserfs update the raid size as it should be big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ * fsedit.pm: basic nfs/smb handling in diskdrake update the raid size as it should be * network/tools.pm: fix typo big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ * partition_table.pm: fixes and function prototype removing * install_steps_interactive.pm, standalone/drakautoinst, proxy.pm, install_interactive.pm, network/ethernet.pm, interactive_http.pm, printerdrake.pm, Xconfigurator.pm, network/netconnect.pm, network/network.pm, interactive_newt.pm, network/modem.pm: big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ * standalone/diskdrake: basic nfs/smb handling in diskdrake * any.pm: fixes and function prototype removing big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ * interactive_gtk.pm: fix bug in box's height use better radiobox keyboard handling big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ enhance look, fix ask_fileW * interactive.pm: readd the sorting based on size when no sorting is precised big renaming of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered in ask_from_ * install_steps.pm: oops, i inverted devfs=nomount and devfs=mount do not use devfs with root software raid 2001/08/18 Pixel * install_steps_interactive.pm: fix pass $all_hds->{hds} instead of $all_hds 2001/08/18 siegel * share/po/de.po: new german version * standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm, network/network.pm, raid.pm: fixed i18n * printerdrake.pm: i18n fixes 2001/08/17 Pixel * install_interactive.pm: use diskdrake_interactive instead of diskdrake * standalone/interactive_http/interactive_http.cgi: fix typo restrict the progs callable to a few one. * standalone/interactive_http/index.html.pl, standalone/interactive_http/index.html: autogenerate index.html * fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice (with IA-like stripping of unused options) * c/stuff.xs.pm: is_ext3 is needed in standalone Xtest not needed in standalone * c/Makefile.PL: is_ext3 is needed in standalone * standalone/interactive_http/miniserv.init, standalone/interactive_http/Makefile: restrict the progs callable to a few one. * Makefile.drakxtools: fix po not build, add interactive_http in DIRS * modules.pm: move back sunhme in sparc only 2001/08/17 dam's * interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone * interactive.pm, install2.pm: removed no_incon * standalone/net_monitor: added no internet connection configured label on button * network/netconnect.pm, network/ethernet.pm: corrected connection script creation 2001/08/17 Pixel * install_interactive.pm: use diskdrake_interactive instead of diskdrake a hell lot of cleanup/rewrite: * diskdrake_interactive created, diskdrake is now interactive aware * added some documentation about the structure used for partitioning * all_hds now contain the various hds, lvm, raid * cleanup the isLVM, isRAID and alike functions * field {type} in detect_devices is now {media_type} * detect_devices::floppies is now floppies_dev * removed old function prototypes * fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of unused options) a hell lot of cleanup/rewrite: * diskdrake_interactive created, diskdrake is now interactive aware * added some documentation about the structure used for partitioning * all_hds now contain the various hds, lvm, raid * cleanup the isLVM, isRAID and alike functions * field {type} in detect_devices is now {media_type} * detect_devices::floppies is now floppies_dev * removed old function prototypes * install_steps_interactive.pm, install_steps_auto_install.pm, install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm, standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm, any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell lot of cleanup/rewrite: * diskdrake_interactive created, diskdrake is now interactive aware * added some documentation about the structure used for partitioning * all_hds now contain the various hds, lvm, raid * cleanup the isLVM, isRAID and alike functions * field {type} in detect_devices is now {media_type} * detect_devices::floppies is now floppies_dev * removed old function prototypes * diskdrake_interactive.pm: add mount options choice (with IA-like stripping of unused options) (part_possible_actions): have possible actions sorted the way we want (Type): fix ext2->ext3 detection a hell lot of cleanup/rewrite: * diskdrake_interactive created, diskdrake is now interactive aware * added some documentation about the structure used for partitioning * all_hds now contain the various hds, lvm, raid * cleanup the isLVM, isRAID and alike functions * field {type} in detect_devices is now {media_type} * detect_devices::floppies is now floppies_dev * removed old function prototypes * modules.pm: move back sunhme in sparc only 2001/08/17 Till Kamppeter * share/rpmsrate: Corrected listing of packages for printing in 'INSTALL' section. 2001/08/17 warly * share/rpmsrate: add package needed by the install in INSTALL remove shapecfg and gpa 2001/08/16 Till Kamppeter * printerdrake.pm: Fixed bug of CUPS not being installed during installation 2001/08/16 Pixel * install2.pm, install_any.pm: add remove_unused to have more place for mo files 2001/08/16 Till Kamppeter * printerdrake.pm: Fixed bug of CUPS not being installed during installation 2001/08/16 Pixel * install_any.pm: add remove_unused to have more place for mo files (getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the unmounting at end of install to fail * install2.pm: add remove_unused to have more place for mo files 2001/08/16 Till Kamppeter * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type 2001/08/16 warly * share/rpmsrate: add package needed by the install in INSTALL 2001/08/16 Pablo Saratxaga * share/po/fr.po: updated French file * share/po/sk.po: updated Slovak file * lang.pm: Added explicit setting of XFree86 internal XIM for Thai 2001/08/16 Pixel * install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the unmounting at end of install to fail 2001/08/16 Till Kamppeter * printerdrake.pm: Fixed setup dialog for the "postpipe" connection type 2001/08/16 warly * share/rpmsrate: add package needed by the install in INSTALL add kernel in INSTALL s/DrakConf/drakconf/ 2001/08/15 Pablo Saratxaga * share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian, Italian and Korean files * share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and Serbian files 2001/08/15 Pixel * standalone/diskdrake: oops reverting modifs commited by error fix XkbOptions handling * standalone/keyboarddrake: fix XkbOptions handling 2001/08/15 Till Kamppeter * printer.pm, printerdrake.pm: Let the "Options" button only appear when the queue is Foomatic or with PPD (CUPS) 2001/08/15 Pablo Saratxaga * share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean files * share/po/es.po: updated spanish and Indonesian files * share/po/id.po: updated Indonesian, Italian and Korean files updated spanish and Indonesian files 2001/08/14 dam's * standalone/net_monitor: added options 2001/08/14 Guillaume Cottenceau * install_any.pm: oops, fix type of installing X or not - fix choice of packages when auto install * Makefile.config: add drakautoinst in drakxtools standalone binaries * install_steps_interactive.pm, install2.pm: - fix createBootdisk with auto - fix setupBootloader with auto - fix behaviour of draknet when auto-install - remove auto flag when error-in-step * install_steps.pm, network/netconnect.pm: - fix behaviour of draknet when auto-install - remove auto flag when error-in-step * Xconfigurator.pm: fix automatic configuration 2001/08/14 Pablo Saratxaga * share/po/sv.po: updated Swedish file 2001/08/14 Pixel * devices.pm: add number-only device-name handling (eg: "801" is "sda1") * interactive_gtk.pm, interactive.pm: - small fixes (esp. gtk sensitive handling) - add ask_file - add "gtk" preference field * my_gtk.pm: remove ask_file (was unused) * http.pm: cleanup to please perl_checker * Makefile (TAGS): add MDK/Common files * services.pm: cleanup (it was working, but wasn't nice) 2001/08/14 dam's * standalone/draknet: corrected activation button 2001/08/14 Guillaume Cottenceau * install_any.pm: oops, fix type of installing X or not - fix choice of packages when auto install * Makefile.config: add drakautoinst in drakxtools standalone binaries * install_steps_interactive.pm, install2.pm: - fix createBootdisk with auto - fix setupBootloader with auto - fix behaviour of draknet when auto-install - remove auto flag when error-in-step * install_steps.pm, network/netconnect.pm: - fix behaviour of draknet when auto-install - remove auto flag when error-in-step * Xconfigurator.pm: fix automatic configuration 2001/08/14 Pablo Saratxaga * share/po/sv.po: updated Swedish file 2001/08/14 Pixel * Xconfigurator.pm: fix typo? 2001/08/14 Till Kamppeter * printerdrake.pm: Transfer queues non-interactively when switching between LPD and LPRng. 2001/08/14 dam's * standalone/draknet: corrected activation button 2001/08/14 Guillaume Cottenceau * install_steps.pm, install_steps_interactive.pm, install2.pm, network/netconnect.pm: - fix behaviour of draknet when auto-install - remove auto flag when error-in-step * Xconfigurator.pm: fix automatic configuration * install_any.pm: - fix choice of packages when auto install 2001/08/14 Pixel * Xconfigurator.pm: fix typo? 2001/08/14 Till Kamppeter * printer.pm: Removed superfluous lines. * printerdrake.pm: Transfer queues non-interactively when switching between LPD and LPRng. Wait message for queue transfer, manufacturer name bugfix 2001/08/13 Chmouel Boudjnah * tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage. Removing old version of eepro100 (no stage1). * tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage. 2001/08/13 dam's * interactive.pm: corrected 'no icon' * network/adsl.pm, network/netconnect.pm: adsl autodetection activated (planq the children) 2001/08/13 Guillaume Cottenceau * standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather than from .. initial revision for drakautoinst - put %installSteps in a separate package (steps.pm) (for drakxtools) - use additional fields {auto} and {noauto}, by step, to ease interactive auto install and oem stuff - in install2.pm, perform each step either from the interactive class or from install_steps, according to the {auto} flag - id, tell each step to not try to be automatic if {noauto} - in the install, have auto install bootdisk created in install_any so we can always write a bootdisk (from install_steps) for further use from drakautoinst in standalone - interactive version of install_steps_auto_install is now inheriting from the interactive class, so we can click on a previous automatic step and have it interactively during an interactive auto install * install_steps.pm, install_steps_interactive.pm, install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm: initial revision for drakautoinst - put %installSteps in a separate package (steps.pm) (for drakxtools) - use additional fields {auto} and {noauto}, by step, to ease interactive auto install and oem stuff - in install2.pm, perform each step either from the interactive class or from install_steps, according to the {auto} flag - id, tell each step to not try to be automatic if {noauto} - in the install, have auto install bootdisk created in install_any so we can always write a bootdisk (from install_steps) for further use from drakautoinst in standalone - interactive version of install_steps_auto_install is now inheriting from the interactive class, so we can click on a previous automatic step and have it interactively during an interactive auto install 2001/08/13 Pixel * install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm: auto_inst enhancements * install_steps_interactive.pm, standalone/XFdrake, install_steps.pm, Xconfigurator.pm: really use a class_discard for Xconfigurator::main * devices.pm: add /dev/hd[mt] handling 2001/08/13 siegel * share/po/de.po: new german version 2001/08/13 Till Kamppeter * printerdrake.pm: Automatic transfer of queues when changing the spooler. Update printer queue list when exiting during install, so that the "Summary" entry is correct. When one sayd "No" on the test page, the modify dialog was not pointing to the current printer * printer.pm: Automatic transfer of queues when changing the spooler. The photo test page was not printed during installation. * interactive.pm: Tree lists are sorted again now. 2001/08/13 yduret * standalone/drakxconf: removed diskdrake from the choice 2001/08/12 dam's * standalone/draknet: longer timeout 2001/08/12 Guillaume Cottenceau * share/po/fr.po: fix ortograf typo 2001/08/12 Pixel * share/po/Makefile: po->mo is no longer gonna be nasty with us * interactive_gtk.pm: clean the nice till fix * tools/cvslog2changelog.pl: add till * Makefile: ensure locales.tar.bz2 in perl-install/share is build po->mo is no longer gonna be nasty with us 2001/08/12 Till Kamppeter * interactive.pm: Lists get only sorted when the "sort" option is given. * printer.pm, printerdrake.pm: Check files before checking RPM database => Acceleration, waiting windows 2001/08/11 dam's * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc, share/themes/mdk-bg.png: new theme for beta * share/theme-editor.pl: updated now works. 2001/08/11 tkamppeter * printer.pm, printerdrake.pm: Restructuring continued and debugged 2001/08/10 dam's * share/theme-editor.pl: added theme editor * network/tools.pm: corrected password file substitution * network/ethernet.pm: remove Data::Dumper * network/netconnect.pm: added spped and timeout handling for isdn * any.pm: corrected autologin question * network/isdn.pm: tomeout option deactivated. * standalone/draknet: corrected internet cnfiguration pop up, and some other studds ifup/down ethx, anew pixmap for list * my_gtk.pm: removed Datta::Dump use * pixmaps/eth_card_mini2.png: added 2001/08/10 Pablo Saratxaga * lang.pm: small font fix * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * share/po/bg.po: updated Bulgarian file updated pot file 2001/08/10 yduret * bootlook.pm: corrected vnew usage (thx gc) 2001/08/09 dam's * standalone/draknet: added missing use added pixmap for eth. Some factorisation * network/tools.pm: added useless function type2interface for future use * my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for standalone mode. * network/isdn.pm: labels corrections 2001/08/09 Guillaume Cottenceau * standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake, standalone/drakxservices, standalone/net_monitor, standalone/draknet, standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake, standalone/drakxconf, standalone/adduserdrake, standalone/livedrake, standalone/drakboot, standalone/draksec: use vnew the right way everywhere * standalone/drakgw: use vnew the right way everywhere - if package installs fail, redo one by one to know which one failed - try to not end up with a failing configuration file, if program is brutally stopped - if unrecognized config file, don't fail, rather ignore it and proceed - run dhcpd_update feature (if present) after setup of dhcp server * share/rpmsrate: put traceroute in network client also, for claudio 2001/08/09 Pixel * standalone.pm, install_any.pm: rename interactive_pkgs in pkgs_interactive 2001/08/09 siegel * standalone/interactive_http/miniserv.logrotate, standalone/interactive_http/Makefile: Added logrotate for "/var/log/drakxtools_http.log" 2001/08/09 tkamppeter * printer.pm, printerdrake.pm: New structure for queue modification, general structure clean-up 2001/08/09 yduret * bootlook.pm: readded in->do_pkg->install (i sux) rewrite in a more drakx fashion * my_gtk.pm: added gtkset_sensitive in wrapper.. 2001/08/08 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2001/08/08 Pixel * install_steps.pm: typo makes interactive_pkgs stuff work add interactive_pkgs stuff * Makefile: skip module CGI in test_pms (perl_checker) * fsedit.pm (check_mntpoint): remove /root from directories that "should remain within the root filesystem" * proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm, printerdrake.pm, standalone/drakgw, standalone/draknet, network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy, standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake, network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add interactive_pkgs stuff * install_steps_interactive.pm: installing foomatic before doing anything about printer add interactive_pkgs stuff * Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work add interactive_pkgs stuff * install_any.pm (remove, remove_nodeps): fix typo makes interactive_pkgs stuff work add interactive_pkgs stuff 2001/08/08 tkamppeter * install_steps_interactive.pm: Installation fitted to new printerdrake * printer.pm: Different choosable test pages available now Corrected init script calls in the (start|stop|restart)_service functions * printerdrake.pm: Different choosable test pages available now Removed superfluous line in install_spooler function 2001/08/08 Pixel * pkgs.pm (naughtyServers): add drakxtools-http 2001/08/07 dam's * standalone/net_monitor: nex features * network/netconnect.pm: removed debugging message * network/isdn.pm: corrected pkgs use -> require * my_gtk.pm: added gtkset_relief * pixmaps/network.png, pixmaps/draknet_step.png: added 2001/08/07 Pixel * pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb removing for re-adding with -kb 2001/08/07 tkamppeter * printer.pm, printerdrake.pm: Automatic installation of all needed packages 2001/08/07 dam's * standalone/draknet: corrected label * network/netconnect.pm: removed debugging message * standalone/net_monitor: nex features added color choice lot of improvments * network/isdn.pm: corrected pkgs use -> require * my_gtk.pm: added gtkset_relief * pixmaps/network.png, pixmaps/draknet_step.png: added 2001/08/07 Guillaume Cottenceau * mdk-stage1/tools.c: say that it's a data read error, when we can't load the ramdisk * mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system wide bzlib.h but our own provided one 2001/08/07 Pixel * rescue/tree/etc/issue: fix distrib number * interactive.pm: adding http feature, mainly for standalone tools * standalone/miniserv.pem, standalone/miniserv.pl: Initial revision import * standalone/interactive_http/miniserv.pl: add interactive_http Initial revision * resize_fat/main.pm: fix * partition_table.pm: nicer names for journalised fs * Makefile.drakxtools, standalone/interactive_http/miniserv.init, standalone/interactive_http/index.html, standalone/interactive_http/interactive_http.cgi, standalone/interactive_http/miniserv.conf, standalone/interactive_http/miniserv.pam, standalone/interactive_http/miniserv.users, Makefile, standalone/interactive_http/Makefile: add interactive_http * interactive_http.pm, standalone/interactive_http.cgi: add interactive_http adding http feature, mainly for standalone tools * share/diskdrake.rc: have every journalised in darkred * c/stuff.xs.pm: add S_IFIFO * standalone/interactive_http/miniserv.pem: Initial revision 2001/08/06 dam's * my_gtk.pm: debugging, profile coding, isdn 128 debugging corrected gtkradio : shift instead of pop * interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift instead of pop * network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging, profile coding, isdn 128 debugging 2001/08/06 Guillaume Cottenceau * tools/i386/busybox: try a busybox with better globbing under the SHELL 2001/08/06 Pablo Saratxaga * share/po/de.po: Updates to German file by Peer Dunker * share/po/vi.po: updated Vietnamese file 2001/08/06 Pixel * c/stuff.xs.pm: kernel_arch removed * fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc) * interactive_gtk.pm, interactive_newt.pm: cleanup, functions already defined in interactive 2001/08/06 yduret * tinyfirewall.pm: use MDK::Common; use network::netconnect; * standalone/drakgw: use MDK::Common; use network::netconnect; and update functions call from netconnect 2001/08/05 Pablo Saratxaga * share/po/eo.po: updated Esperanto file 2001/08/05 Pixel * install_steps_auto_install.pm: switch to gtk install when interactiveSteps is defined 2001/08/05 tkamppeter * printer.pm, printerdrake.pm: Automatic installation and start of the desired printer spooler 2001/08/04 Pixel * share/list: add tune2fs enabling switching from ext2 to ext3 * fs.pm, fsedit.pm, partition_table.pm: add ext3 support * diskdrake.pm: add ext3 support (Type): handle lossless switch from ext2 to ext3 * pkgs.pm: make perl_checker happy * c/stuff.xs.pm, c/Makefile.PL: add is_ext3 * common.pm: moved arch() and alike to MDK::Common::System 2001/08/04 Pixel * install_steps.pm (choosePackages): simplify, fix setSelectedFromCompssList not called in expert even the first_time (especially nasty for auto_installs) * fs.pm, partition_table.pm, fsedit.pm: add ext3 support * diskdrake.pm: add ext3 support (Type): handle lossless switch from ext2 to ext3 * install_steps_gtk.pm: add the feather feature, but do not enable it * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/ (wait_msg doesn't exist anywhere, it must be a fpons typo) * pkgs.pm: make perl_checker happy * c/stuff.xs.pm, c/Makefile.PL: add is_ext3 * bootloader.pm: as when lilo is selected, we don't try to install grub, just create the config file in case it may be useful * common.pm: moved arch() and alike to MDK::Common::System * partition_table_raw.pm: add yaboot detection * install_any.pm, share/rpmsrate: create a new flags "X" selected by default, contain what X related packages which were in "SYSTEM" 2001/08/04 Pixel * install_steps.pm (choosePackages): simplify, fix setSelectedFromCompssList not called in expert even the first_time (especially nasty for auto_installs) * install_steps_gtk.pm: add the feather feature, but do not enable it * bootloader.pm: as when lilo is selected, we don't try to install grub, just create the config file in case it may be useful * interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/ (wait_msg doesn't exist anywhere, it must be a fpons typo) * share/rpmsrate, install_any.pm: create a new flags "X" selected by default, contain what X related packages which were in "SYSTEM" 2001/08/03 dam's * standalone/net_monitor, network/tools.pm, network/netconnect.pm, network/isdn.pm: debugging, 128Kb/s ISDN * Makefile.drakxtools, Makefile: added network pms 2001/08/03 Pixel * partition_table.pm: typo fix replace isJfs/isXfs/... with isThisFs("jfs" * install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs" update_userkderc is now called update_gnomekderc * Makefile: better po skipping * commands.pm (sync): (re-?)add * fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm: replace isJfs/isXfs/... with isThisFs("jfs" * fsedit.pm (check_mntpoint): /root should remain within the root filesystem * install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr update_userkderc is now called update_gnomekderc 2001/08/02 Guillaume Cottenceau * mdk-stage1/adsl.c: - fix problem of clashing user/pass between adsl and ftp/http in case of automatic installs - update doc on automatic install parameters (doc/TECH-INFOS) * mdk-stage1/doc/TECH-INFOS: - small update - fix problem of clashing user/pass between adsl and ftp/http in case of automatic installs - update doc on automatic install parameters (doc/TECH-INFOS) 2001/08/02 Pablo Saratxaga * share/po/no.po: updated Norwegian file 2001/08/02 Pixel * install_steps_interactive.pm, services.pm, install_interactive.pm, network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the object * partition_table.pm, fsedit.pm, diskdrake.pm: JFS support 2001/08/02 Guillaume Cottenceau * mdk-stage1/adsl.c: - fix problem of clashing user/pass between adsl and ftp/http in case of automatic installs - update doc on automatic install parameters (doc/TECH-INFOS) * mdk-stage1/doc/TECH-INFOS: - small update - fix problem of clashing user/pass between adsl and ftp/http in case of automatic installs - update doc on automatic install parameters (doc/TECH-INFOS) 2001/08/02 Pablo Saratxaga * share/po/no.po: updated Norwegian file 2001/08/02 Pixel * install_any.pm: instead of testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the object add jfs support * install_steps_interactive.pm, services.pm, install_interactive.pm, network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the object * partition_table.pm: JFS support add jfs support * fsedit.pm, diskdrake.pm: JFS support * tools/ntp_servers.pl, timezone.pm: update ntp servers list * fs.pm, share/list: add jfs support 2001/08/02 Pixel * tools/ntp_servers.pl, timezone.pm: update ntp servers list * fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support 2001/08/01 dam's * my_gtk.pm: write_on_text writes in blue instead of black * network/isdn.pm: typo added de-installation before installateion * network/netconnect.pm: translation correction 2001/08/01 Pixel * install_steps.pm, fsedit.pm: handle auto_allocate_raids for auto_installs * raid.pm (new): now works with a list of partitions 2001/08/01 tkamppeter * printer.pm: Fixed bug in recognizing the printer ID in the Foomatic overview. 2001/08/01 dam's * my_gtk.pm: write_on_text writes in blue instead of black * network/isdn.pm: typo added de-installation before installateion * network/netconnect.pm: translation correction 2001/08/01 Pixel * install_steps.pm, fsedit.pm: handle auto_allocate_raids for auto_installs * raid.pm (new): now works with a list of partitions 2001/07/31 dam's * network/netconnect.pm: added splash screen between different configurations. Added splash wizard mode added intro step for each configuration type. * network/tools.pm: corrected ask_connect_now * my_gtk.pm: added write_on pixmap : a function to write text on pixma, using fonts. * network/ethernet.pm: added intro step for each configuration type. 2001/07/31 Guillaume Cottenceau * install_steps_interactive.pm: after copying the auto install floppy, sync in case you shall remove the floppy right after the LED switches off yet the kernel decides to not flush everything * modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet installs * bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux so..) 2001/07/31 Pixel * common.pm (translate): empty string translation is an empty string * install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/ * share/rpmsrate: add cpio lower gurpmi (5->4) * share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale support better handling of locales * Makefile.drakxtools (install): s/cp -rf/cp -rfL/ (-L = --dereference, aka always follow symbolic links) * install_steps_gtk.pm (installPackages): make $show_advertising a global state (for Vincent Meyer) * share/Makefile, Makefile: better handling of locales * install_steps_auto_install.pm: remove bad prototype 2001/07/30 dam's * network/ethernet.pm: added cable internet connection selection added internet connection selection in case of multiple configurations * network/netconnect.pm: corrected ask_connect_now behaviour corrected ask_connect_now debug added internet connection selection in case of multiple configurations * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm: corrected ask_connect_now added internet connection selection in case of multiple configurations 2001/07/30 Pixel * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as hdlist files" occurs when the hdlists are in fact not available * share/locales.tar.bz2.ppc, share/locales.tar.bz2, share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh, share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2 based on installed glibc * printer.pm, printerdrake.pm: use MDK::Common i wonder why it was included and Till used an older version without merging? * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done yet) * share/rpmsrate: raise rxvt (4->5) lower rpmdrake & harddrake (5->4) remove rootfiles (unneeded) * Makefile: use -excludeMDK::Common::Globals for perl_checker automatic handling of locales.tar.bz2 based on installed glibc 2001/07/30 tkamppeter * printer.pm, printerdrake.pm: In beginners mode one chooses only the printer, not the driver (default driver) 2001/07/30 dam's * network/netconnect.pm: debug added internet connection selection in case of multiple configurations * network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm: added internet connection selection in case of multiple configurations * network/ethernet.pm: added cable internet connection selection added internet connection selection in case of multiple configurations 2001/07/30 Guillaume Cottenceau * mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h: have a memory limit also for Rescue (different one) 2001/07/30 Pixel * printer.pm, printerdrake.pm: use MDK::Common i wonder why it was included and Till used an older version without merging? * resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done yet) * share/rpmsrate: raise rxvt (4->5) lower rpmdrake & harddrake (5->4) remove rootfiles (unneeded) * pkgs.pm (getDeps): ensure "depslist.ordered has not same package as hdlist files" occurs when the hdlists are in fact not available * Makefile: use -excludeMDK::Common::Globals for perl_checker automatic handling of locales.tar.bz2 based on installed glibc * share/locales.tar.bz2.ppc, share/locales.tar.bz2, share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh, share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2 based on installed glibc 2001/07/28 tkamppeter * printer.pm, printerdrake.pm: Support for PPD files of PostScript printers (when CUPS is used) 2001/07/27 Franois Pons * install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree is seen as a package. * interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on cancel (previously always 1). added a before leaving code to clean added reference (else it seems to bahave strangely on changing steps). fixed wrong reference to added icons to ask_browse_tree_info_refW. * services.pm: allow cancel on services which do not change anything. * install_steps_interactive.pm: changed warn dialog to okcancel dialog when asking user to insert Boot floppy used or Update Modules floppy (die may cause to rerun install else). 2001/07/27 gbeauchesne * install_steps_gtk.pm: - install_steps_gtk.pm (launchX) : create /var/log, if not existent, for XFree86.log 2001/07/27 Guillaume Cottenceau * mdk-stage1/modules.c: allow to escape from Update Modules if you don't want to insert an ext2 floppy Disk -> Floppy for Update Modules disk 2001/07/27 Stew Benedict * share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm, Xconfigurator.pm: last of sync with PPC beta mods 2001/07/27 tkamppeter * standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake changed to use Foomatic, driver options, spooler change 2001/07/26 dam's * network/isdn.pm: added firmware loading/configuration not loading the module at detection. * standalone/draknet: MDK::common correction * modules.pm: added default option id="HiSax" to isdn module 2001/07/26 fcrozat * share/po/fr.po: Fix spelling of 'molette' 2001/07/26 Franois Pons * install2.pm: added blank and updatemodules options to DrakX. * bootloader.pm: added prioritary kernel entry 'default' as the kernel typically copied from a modified blank.img file with a kernel (no initrd.img necessary to build). This kernel takes precedance over any other kernel. * install_steps_interactive.pm: really fixes Diskette with Floppy. fix typo as Diskette to Floppy. add support for new modules load as described by GG. * install_steps.pm: fixed some silly typo and tiny bugs. fixed typo as Diskette to Floppy. add support for modified blank.img floppy and Update Modules floppy. In first case copy kernel to /boot/vmlinuz-default to be taken into account by bootloader suggestion method. In second case, check installed kernel and update any modules listed in the Update Modules floppy. 2001/07/26 gbeauchesne * bootloader.pm: - Don't set "lba32" on ia64 2001/07/26 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass "--blank" to DrakX when module loading is disabled - add "changedisk" feature - add "updatemodules" feature * mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: - add "changedisk" feature - add "updatemodules" feature * mdk-stage1/probing.c: silently load usb controllers 2001/07/25 dam's * standalone/draknet: fixed new network organization * standalone/net_monitor: updated. Profile handling. * network/isdn_consts.pm: updated ISDN detection. Added firmware handling and drivers other than hisax 2001/07/25 Franois Pons * pkgs.pm: fixed no test (or die test) to void package read on depslist (allowed to keep package indexing good on multi-arch). cleaned code to examine depslist.ordered and packages list. * rescue/make_rescue_img: fixed to use perl-MDK-Common. * tools/syncrpms: fixed still missing rpmtools:: before a version_compare ... 2001/07/25 Guillaume Cottenceau * mdk-stage1/modules_descr.h: small typo * mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting 2001/07/25 Pixel * share/po/Makefile (install): build mo's * commands: move to MDK::Common, bool->to_bool * common.pm: do not export sync, keep it in common (esp. so that it doesn't conflict with my_gtk::sync (removeXiBSuffix): add TB (tera) * share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common * share/verify_modules.pl: new common syntax * Makefile: - temporary hack to have at least good UTF-8 based locales (otherwise rpmlib segfaults) - touch share/po/*.po, so that they are not rebuilded (pablo takes care of them) * share/list: add MDK::Common::Globals * partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm, install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not export sync, keep it in common (esp. so that it doesn't conflict with my_gtk::sync 2001/07/25 Stew Benedict * mdk-stage1/modules_descr.h: add decriptions for integrated Apple Network/SCSI hardware 2001/07/24 dam's * network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm: corrected speed fax + PCI, updated configuration 2001/07/24 daouda * bootlook.pm: better runlevel handling -> persistent level choice 2001/07/24 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2001/07/24 Pixel * commands.pm: move to MDK::Common, bool->to_bool fix syntax removed/renamed unused/seldom-used functions generalize the use of chomp_ as the functional alternative to chomp (and works on lists) * swap.pm: temporary hack to have at least good UTF-8 based locales (otherwise rpmlib segfaults) move to MDK::Common, bool->to_bool * unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the functional alternative to chomp (and works on lists) * globals.pm, perl2fcalls: - globals is now MDK::Common::Globals - perl2fcalls is now /usr/bin/perl_checker * install_steps_gtk.pm: move to MDK::Common, bool->to_bool move to MDK::Common, bool->to_bool removed/renamed unused/seldom-used functions * common.pm: move to MDK::Common, bool->to_bool cleanup (remove unused stuff and dangerous prototypes) removed/renamed unused/seldom-used functions generalize the use of chomp_ as the functional alternative to chomp (and works on lists) * network/tools.pm, network/adsl.pm, network/netconnect.pm, network/ethernet.pm, network/isdn.pm, network/modem.pm: - globals is now MDK::Common::Globals - perl2fcalls is now /usr/bin/perl_checker move to MDK::Common, bool->to_bool * partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm, standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm, partition_table_mac.pm, standalone/mousedrake, devices.pm, install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm, install_steps_stdio.pm, loopback.pm, resize_fat/any.pm, standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm, interactive_gtk.pm, standalone/drakxservices, fsedit.pm, network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm, resize_fat/directory.pm, standalone/net_monitor, install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm, lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec, standalone/drakxconf, resize_fat/info_sector.pm, standalone/adduserdrake, sbus_probing/main.pm, printer.pm, partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm, Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm, standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm, interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm, bootloader.pm: move to MDK::Common, bool->to_bool * services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool removed/renamed unused/seldom-used functions * standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm, detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool generalize the use of chomp_ as the functional alternative to chomp (and works on lists) * Makefile: temporary hack to have at least good UTF-8 based locales (otherwise rpmlib segfaults) move to MDK::Common, bool->to_bool move to MDK::Common, bool->to_bool 2001/07/23 dam's * modules.pm, network/tools.pm, network/isdn_consts.pm, network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light. Only 64kb/s and still some debuf stuff to be fixed. 2001/07/23 Pablo Saratxaga * share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files 2001/07/23 Pixel * install_steps_interactive.pm: cleanup * c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile, tools/make_mdkinst_stage2, lang.pm, share/po/Makefile, share/po/.cvsignore: do not use the po's directly. Use mo's through gettext 2001/07/22 dam's * network/netconnect.pm, network/isdn.pm: updated isdn config, moved isdn_data from netconnect_const to isdn_const big work on isdn. Not finished * modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm: big work on isdn. Not finished * network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn config, moved isdn_data from netconnect_const to isdn_const 2001/07/20 Franois Pons * docs/README.pxe: initial release, dhcpd and tftpd only. 2001/07/20 Pablo Saratxaga * share/po/el.po: updated Greek file 2001/07/20 Pixel * share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl * lang.pm: fix (load_po): enhance readability * share/po/fake_c.pl: cleanup externalize the pm 2 pm_.c in fake_c.pl * common.pm (translate): basic plural forms handling (not finished) * help.pm: fix missing ``"'' * bootloader.pm: fix (install_lilo): order fat partitions first 2001/07/19 dam's * share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc, share/help.png: new color * network/netconnect.pm: correct bug. thanx to the little stagiaire. 2001/07/19 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new graphic logo for 8.1 2001/07/19 Pablo Saratxaga * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po, share/po/eu.po: updated Croatian file 2001/07/19 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new graphic logo for 8.1 * Xconfigurator.pm: fixed problable freeze on pci probe. 2001/07/19 Pablo Saratxaga * share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po, share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po, share/po/eu.po: updated Croatian file 2001/07/19 Pixel * globals.pm: no strict 'refs' instead of 'vars' * services.pm: rename ask_install_gtk in ask_install, ask_install is now ask_install_simple (obsolete) * install_steps_auto_install.pm: fix exit install in graphical auto_install's 2001/07/19 Pixel * install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based on Michael Brown patch: - enables graphical steps in auto_installs for more than gtk - various cleanup * globals.pm: no strict 'refs' instead of 'vars' * services.pm: rename ask_install_gtk in ask_install, ask_install is now ask_install_simple (obsolete) 2001/07/18 mbadaire * modules.pm, install_any.pm, bootloader.pm: IA64 adaptation 2001/07/18 Stew Benedict * modules.pm, install_steps.pm, install_steps_interactive.pm, tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm, diskdrake.pm: roll back some changes from PPC beta - OldWorld vs NewWorld bootloader modem detection on ttyS0, new sound module in 2.4.4 2001/07/17 Franois Pons * install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4 and S3 ViRGE on reboot with Aurora). * Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test for these card. 2001/07/16 Pablo Saratxaga * share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no more used) * keyboard.pm: small keyboard changes 2001/07/13 Thierry Vignaud * share/po/fr.po: update 2001/07/12 Franois Pons * fs.pm: fixed wrong examination of fsck return code (exit code 1 says fsck succeeded in fixing partition and now is ok). * run_program.pm: changed exit code of failed exec in rooted to 128 instead of 1 (may clash with exit code of fsck else). * any.pm: fixed bug for writing in /etc/sysconfig/desktop file. 2001/07/12 Franois Pons * interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW (default). * services.pm: reworked to use new service layout for install. * install_steps_gtk.pm: use common code for tree with info dialog (individual package selection). * fs.pm: fixed wrong examination of fsck return code (exit code 1 says fsck succeeded in fixing partition and now is ok). * interactive_gtk.pm: merging common code for individual package selection and service to create ask_browse_tree_info_refW, added featrures for group icon always up-to-date (take some memory but not too much, not used if flat model). * run_program.pm: changed exit code of failed exec in rooted to 128 instead of 1 (may clash with exit code of fsck else). * any.pm: fixed bug for writing in /etc/sysconfig/desktop file. 2001/07/10 Stew Benedict * mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build, define TIOCSCTTY, Makefile mods 2001/07/09 Franois Pons * pkgs.pm: added multiple tries if a transaction of only one package fails. * install_any.pm: added LDAP support for authentication. * install_steps_interactive.pm: added LDAP support for password authentication, updated root password window look. * bootloader.pm: fixed compilation error. removed compilation error, the resolution is not quite good and may be reworked :-) * help.pm: updated root password help. 2001/07/09 mbadaire * bootloader.pm: modify lilo.conf to elilo.conf if arch ia64 * common.pm: Add IA64 support 2001/07/08 Pixel * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that boot partition is set correctly again 2001/07/08 Pixel * bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that boot partition is set correctly again 2001/07/06 Franois Pons * pkgs.pm: fixed selected_leaves. change algorithm as previous one can still causes dead lock and may not reproduce correct list. take care of choice that need to be examined before else another package may be chosen if choice is not satisfied when selecting packages. * install_any.pm: change all 8 space into a tabulation, this is simple and may change visual aspect but it gives correct output and filesize by 40%. 2001/07/06 Franois Pons * pkgs.pm: fixed selected_leaves. change algorithm as previous one can still causes dead lock and may not reproduce correct list. take care of choice that need to be examined before else another package may be chosen if choice is not satisfied when selecting packages. * install_any.pm: change all 8 space into a tabulation, this is simple and may change visual aspect but it gives correct output and filesize by 40%. 2001/07/06 Pixel * tools/ntp_servers.pl: some workarounds 2001/07/06 Pixel * tools/ntp_servers.pl: some workarounds 2001/07/05 Franois Pons * keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a laptop is detected. 2001/07/05 Guillaume Cottenceau * mdk-stage1/modules_descr.h: add usb net descriptions 2001/07/05 Pixel * fsedit.pm (file2part): created * any.pm: ia64 bootloader configuration adaptations * bootloader.pm: typo fix ia64 bootloader configuration adaptations 2001/07/04 dam's * globals.pm: added error handling * network/netconnect.pm, network/ethernet.pm: modularized. It compiles, runs, and works for some stuff. modularization continuated updated CVS: ---------------------------------------------------------------------- uses the fantastic global module. corrected * standalone/draknet: corrected * network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and works for some stuff. updated CVS: ---------------------------------------------------------------------- uses the fantastic global module. corrected * network/network.pm: modularized. It compiles, runs, and works for some stuff. modularization continuated * network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and works for some stuff. updated CVS: ---------------------------------------------------------------------- uses the fantastic global module. * docs/net_object_class.fig: updated doc 2001/07/04 Franois Pons * Xconfigurator.pm: added missing last Card read from Cards+ file. allow S3 card to have VideoRam uncommented, fix 86c368 video driver that seems needing VideoRam too. fixed need of video ram if 86c368 and S3 ViRGE. * install_any.pm: another too wide string truncated to 80 chars. make auto_inst.cfg file no longer than 80 chars wide. * install_steps_interactive.pm: added back timezone settings (thanks FredC). 2001/07/04 Guillaume Cottenceau * mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*" * mdk-stage1/newt-frontend.c: very nice things happen when you hardcode arrays to a too small value * docs/HACKING: update -d in order to get all the directories... 2001/07/04 mbadaire * tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64, tools/ia64/e2fsck.shared: Ia64 Adaptation * install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list, share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64 adaptation 2001/07/04 Pixel * pkgs.pm (selected_leaves): fix dead-loop (selected_leaves): make it work with loops (eg: mandrake_desk loops with control-center resulting on none of them being a leaf) * perl2fcalls: check exclude_uses before reporting bad use of "use" exclude module globals from use's to look at * globals.pm (import): yet another fix fix a pb when init is called before another import typo correction enhanced: shared values are grouped together based on a name module to share constant values between modules * fsedit.pm: add /boot/efi in suggestions for ia64 * install_interactive.pm, install_steps.pm: fix typo verify a /boot/efi partition exists * Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list, share/list.sparc: remove busybox as default shell. Only use it as the interactive shell on tty2 2001/07/03 dam's * network/adsl.pm, network/netconnect_consts.pm, network/tools.pm, network/modem.pm, network/netconnect.pm, network/isdn.pm: network subsystem now compiles. Enjoy * docs/net_object_class.fig: documentation about net modules structure 2001/07/03 Franois Pons * network/netconnect.pm: fix another dam's sucks fix dam's sucks * network/netconnect_consts.pm, Makefile.config: fix dam's sucks * standalone/XFdrake: expert is allowed to choose frame buffer. * install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage package selection file used by auto_install too from packages tree directly on floppies. * share/floppy.png: updated size to 16x22 to be more aligned. for loading/saving packages selection. * install_any.pm: modified g_default_packages to be used from package tree save on floppy. * install_steps_gtk.pm: added Load/Save on floppy. added improve choice of package, well not very usefull but asked by higher people :-) 2001/07/03 Guillaume Cottenceau * mdk-stage1/rp-pppoe/gui/html/props-basic.png, mdk-stage1/rp-pppoe/gui/html/props-options.png, mdk-stage1/rp-pppoe/gui/html/props-advanced.png, mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png, mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png, mdk-stage1/rp-pppoe/gui/html/mainwin.png, mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop * modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore, mdk-stage1/usb-resource/Makefile, mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile, mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support for install from USB Network Adapters 2001/07/03 Pablo Saratxaga * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po, share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file 2001/07/03 Pixel * timezone.pm (configureTimezone): propose a list of NTP servers (ntp_server): fix add ntp handling * fs.pm (mount): fix fsck.ext2'ing (mount): add fsck.ext2 before ext2-mounting * share/themes/DarkMarble-gloom2.png: re-adding with -kb re-adding with -kb * pixmaps/user.png: re-adding with -kb removing for re-adding with -kb re-adding with -kb removing for re-adding with -kb * share/themes/blueHeart-button4.png, share/reload.png, share/themes/focus.png, share/themes/DarkMarble-button3_in.png, share/logo-mandrake.png, share/themes/marble3d-check1.png, share/themes/blueHeart-button_def.png, share/rpm-semiselected.png, share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png, share/rpm-installed.png, share/themes/marble3d-button1.png, share/logo-mandrake_sav.png, share/themes/mdk-button1.png, share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png, share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png, share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png, pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png, share/themes/marble3d-button4.png, pixmaps/bootloader.png, share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png, share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png, share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png, share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png, pixmaps/rootpasswd.png, share/help.png, share/themes/DarkMarble-check_on.png, share/themes/blueHeart-button1.png, pixmaps/keyboard.png, pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png, share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png, pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb removing for re-adding with -kb * install_any.pm, install_steps.pm: add ntp handling * tools/addchangelog.pl: reverted the last erroneous modif re-adding with -kb * tools/ntp_servers.pl: get a formatted list of NTP servers from an authorised source * install_steps_interactive.pm (doPartitionDisks): better error message when no root partition is found (configureTimezone): propose a list of NTP servers add ntp handling * docs/comparisons: re-adding with -kb 2001/07/02 dam's * install_steps_interactive.pm: new network sources reorganizationCVS: ---------------------------------------------------------------------- * share/list: added modinfo * modparm.pm: syntax correction * network/netconnect_consts.pm, network.pm, standalone/draknet, network/tools.pm, netconnect.pm, network/netconnect.pm, network/ethernet.pm, network/isdn.pm, network/adsl.pm, network/network.pm, network/modem.pm, netconnect_consts.pm: new network sources reorganization 2001/07/02 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: update po files 2001/07/02 Pixel * crypto.pm: remove buggy prototype * share/po/Makefile: yet even better i18n strings extraction - fix to add some missing messages - add more verif * c/stuff.xs.pm: use size_t instead of int where it should * Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in XF3) * share/po/b_dump_strings.pm: high level i18n messages getting. only partial stuff. Used only for verification * perl2fcalls: add handling of using pkg::func when func is provided by pkg2 use'd by pkg 2001/06/25 Pablo Saratxaga * share/po/id.po: updated Indonesian file 2001/06/25 Pixel * c/stuff.xs.pm: switch from llseek to lseek64 2001/06/23 siegel * share/po/de.po: new german version 2001/06/22 Franois Pons * bootloader.pm: take care of enterprise kernel if installed. * install_any.pm: automagically install kernel-enterprise if memory is greater than 800MB. 2001/06/22 Guillaume Cottenceau * share/po/fr.po: unfuzzyise 2001/06/22 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, install_steps_interactive.pm, share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/ 2001/06/21 Franois Pons * pkgs.pm: added minimal support for rpmtools >= 3.0 2001/06/21 Guillaume Cottenceau * install_any.pm: generate_automatic_stage1_params: listize use busybox for the shell of stage2 * mdk-stage1/Makefile: defaults to not spawn shell * mdk-stage1/hack: kloug * Makefile, tools/i386/busybox, share/list.ppc, share/list, share/list.alpha, share/aliases: use busybox for the shell of stage2 2001/06/21 Pixel * docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/ s/linux-mandrake/mandrakesoft/ (hand made, no i18n messages done) s/Linux-Mandrake/Mandrake Linux/ s/linux-mandrake/mandrakesoft/ (hand made, no i18n messages done) * genmodparm: remove duplicate, look in gi/tools * standalone/printerdrake, install2, docs/HACKING, tools/genmodparm, mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README, standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit, mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm, mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl, bootloader.pm: s/Linux-Mandrake/Mandrake Linux/ s/linux-mandrake/mandrakesoft/ (hand made, no i18n messages done) * mdk-stage1/make_boot_img: remove GG sux s/Linux-Mandrake/Mandrake Linux/ s/linux-mandrake/mandrakesoft/ (hand made, no i18n messages done) 2001/06/11 dam's * proxy.pm: updated typoCVS: ---------------------------------------------------------------------- proxy * my_gtk.pm: added gtkset_layout * standalone/drakproxy: corrected CVS: ---------------------------------------------------------------------- updated perlised * interactive.pm: no icon if wizard 2001/06/11 Franois Pons * Xconfigurator_consts.pm: added some bigger memory range. * Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when modifying mga_dma = 0 really fix the Matrox G200 PCI card acceleration using XF3, by disabling DMA on /etc/X11/glx.conf added magic probe of resolution found, if the probed resolution seems strange according to memory available, it try to let the user select the right resolution and depth. * install_steps.pm, printer.pm: applied patches given for printer configuration bug reported by David Eastcott. 2001/06/11 Guillaume Cottenceau * modules.pm: have PPP drivers in net_raw rather than in net add PPP modules for 'net' drivers * rescue/tree/etc/rc.sysinit: minor changes * rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much as possible before rebooting the rescue * mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c, mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h, mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c, mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl pppoe installation available Initial revision import initial ppp sources * mdk-stage1/dhcp.c: change location of error message when no reply received * mdk-stage1/rp-pppoe/man/pppoe-relay.8, mdk-stage1/rp-pppoe/configs/firewall-masq, mdk-stage1/rp-pppoe/gui/html/props-nic.png, mdk-stage1/rp-pppoe/src/pppoe-sniff.c, mdk-stage1/rp-pppoe/configs/firewall-standalone, mdk-stage1/rp-pppoe/gui/html/tkpppoe.html, mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui, mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8, mdk-stage1/rp-pppoe/scripts/adsl-start.in, mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go, mdk-stage1/rp-pppoe/man/pppoe.8, mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png, mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in, mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c, mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c, mdk-stage1/rp-pppoe/man/pppoe-server.8, mdk-stage1/rp-pppoe/configs/pppoe.conf, mdk-stage1/rp-pppoe/gui/html/props-advanced.png, mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh, mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure, mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c, mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c, mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h, mdk-stage1/rp-pppoe/scripts/adsl-init.in, mdk-stage1/rp-pppoe/rp-pppoe.spec, mdk-stage1/rp-pppoe/scripts/adsl-connect.in, mdk-stage1/rp-pppoe/man/pppoe.conf.5, mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in, mdk-stage1/rp-pppoe/man/adsl-start.8, mdk-stage1/rp-pppoe/gui/html/mainwin.png, mdk-stage1/rp-pppoe/rp-pppoe-gui.spec, mdk-stage1/rp-pppoe/gui/html/props-basic.png, mdk-stage1/rp-pppoe/man/adsl-status.8, mdk-stage1/rp-pppoe/configs/pppoe-server-options, mdk-stage1/rp-pppoe/man/adsl-connect.8, mdk-stage1/rp-pppoe/scripts/adsl-setup.in, mdk-stage1/rp-pppoe/scripts/adsl-stop.in, mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c, mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c, mdk-stage1/rp-pppoe/README, mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png, mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1, mdk-stage1/rp-pppoe/scripts/adsl-status, mdk-stage1/rp-pppoe/man/adsl-setup.8, mdk-stage1/rp-pppoe/gui/html/props-options.png, mdk-stage1/rp-pppoe/src/configure.in, mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c, mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in, mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c, mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision import initial sources from rp-pppoe v3.0 * mdk-stage1/Makefile: change handling of .depend in Makefile have adsl pppoe installation available * mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD that will show us '**' for passwords * mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore, mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore, mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c, mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile, mdk-stage1/make_boot_img: have adsl pppoe installation available * detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to autodetect raid arrays (still needs a kernel that implements the ioctl..) * tools/Makefile: perl 5.6.1 now * mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from my code anymore, expect the bootloader to set the parameter correctly * mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README, mdk-stage1/ppp/solaris/Makefile.sol2, mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down, mdk-stage1/ppp/solaris/Makefile.sol2-64, mdk-stage1/ppp/include/net/ppp_defs.h, mdk-stage1/ppp/pppstats/Makefile.sunos4, mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c, mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h, mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux, mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c, mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2, mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h, mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc, mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h, mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c, mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c, mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h, mdk-stage1/ppp/svr4/ppp_comp_mod.c, mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c, mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer, mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h, mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h, mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c, mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets, mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8, mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2, mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile, mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4, mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX, mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c, mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh, mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c, mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8, mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h, mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h, mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c, mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs, mdk-stage1/ppp/pppd/sys-linux.c.wtmp, mdk-stage1/ppp/include/linux/if_pppvar.h, mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux, mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam, mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3, mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c, mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c, mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile, mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8, mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ, mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c, mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2, mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh, mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL, mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c, mdk-stage1/ppp/pppd/plugins/passprompt.c, mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c, mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback, mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP, mdk-stage1/ppp/pppd/Makefile.sol2, mdk-stage1/ppp/pppd/plugins/minconn.c, mdk-stage1/ppp/etc.ppp/options.options, mdk-stage1/ppp/pppdump/Makefile.linux.makeopt, mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem, mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System, mdk-stage1/ppp/etc.ppp/chap-secrets, mdk-stage1/ppp/pppstats/Makefile.linux, mdk-stage1/ppp/sample/pap-secrets, mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8, mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8, mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on, mdk-stage1/ppp/include/linux/ppp_defs.h, mdk-stage1/ppp/scripts/chatchat/chatchat.c, mdk-stage1/ppp/scripts/chatchat/README, mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master, mdk-stage1/ppp/svr4/Makedefs, mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c, mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h, mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2, mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc, mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c, mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux, mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer, mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux, mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master, mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h, mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c, mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h, mdk-stage1/ppp/pppd/Makefile.linux.makeopt, mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c, mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh, mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add, mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h, mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c, mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf, mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h, mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top, mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c, mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c, mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h, mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top, mdk-stage1/ppp/svr4/Makefile.svr4, mdk-stage1/ppp/pppd/plugins/Makefile.linux, mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision import initial ppp sources 2001/06/11 odin * standalone/drakproxy: first import of drakproxy 2001/06/11 Pixel * install2.pm (main): don't check /usr/bin/urpmi, better check /usr/sbin/urpmi.update * commands.pm (grep_): add a missing semi-colon * share/compssUsers: remove NIS which is handled by DrakX (titi sucks) 2001/06/10 Guillaume Cottenceau * rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit, rescue/Makefile: - add 'guessmounts' that mimics RH's detecting of partitions when rescue starts 2001/06/10 Pablo Saratxaga * share/po/az.po: updated Azeri file * share/po/ru.po, share/po/DrakX.pot: updated Russian file 2001/06/10 Pixel * rescue/guessmounts: pixelization (tested!) * install_any.pm (g_auto_install): more comments in auto_inst.cfg file 2001/06/09 Guillaume Cottenceau * rescue/list.i386: rescuept is in /sbin now * share/list: rescuept in /sbin now 2001/06/05 Guillaume Cottenceau * mdk-stage1/network.c: don't wait on upping lo interface * mdk-stage1/modules.c: fix minor bug detecting when modules are present * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c: i need working random suite for ppp with dietlibc * mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two stage1 processes! 2001/06/05 Pablo Saratxaga * share/po/pl.po: updated Polish file 2001/06/05 Pixel * fs.pm (mount): notail in any case * tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst, tools/i386/netboot/.cvsignore: menu.lst is now a local file created from the example * share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1 * Makefile: fix 2001/06/02 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file 2001/06/01 Guillaume Cottenceau * mdk-stage1/Makefile: use -FULL postfix for common .c files targetting stage1-full * mdk-stage1/stage1.c: minor fix * mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs, i want to link against glibc too * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c: - have strncat behave the same way as in glibc - declare that we're using the DIETLIBC in include/stdlib.h, so I can change my mind in "dns.c" to handle broken glibc which is not capable of doing name resolution with a static binary * mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c, mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c, mdk-stage1/url.c, mdk-stage1/network.h: - first draft of adsl support - get back some code for supporting broken glibc unable to resolve when linked statically * mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c, mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c, mdk-stage1/dietlibc/lib/tcsetattr.c, mdk-stage1/dietlibc/include/termios.h, mdk-stage1/dietlibc/include/netdb.h, mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe stuff compile better 2001/05/31 daouda * bootlook.pm: add runlevel chooser feature 2001/05/31 Pixel * rescue/make_rescue_img: check presence of files from list and list.ARCH * Makefile (get_needed_files): exit with error message if files from share/list (and share/list.ARCH) are missing * install2.pm: hide step formatPartitions when upgrading 2001/05/30 mbadaire * mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c, mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/obj/Makefile, mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile, mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile, mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile, mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: - allow build on ia64 - have CFLAGS centralized in Makefile.common (should help ports such as alpha) - better looking sub makefiles 2001/05/30 Pixel * Makefile.drakxtools (install): ensure pm's in subdirs don't have /use(diagnostics|vars|strict)/ 2001/05/29 Franois Pons * printerdrake.pm: added fix from Michael Brown to handle pipe in queue name for lpr. 2001/05/29 Thierry Vignaud * share/compssUsers: add NIS client to network clients 2001/05/29 Franois Pons * printerdrake.pm: added fix from Michael Brown to handle pipe in queue name for lpr. 2001/05/28 Guillaume Cottenceau * mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly rewritten..) 2001/05/25 Stew Benedict * rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix bootstrap creation, formatting sequence * install_steps_interactive.pm: fix bootstrap information screen back to orig with missing ":" - PPC add hfs support to rescue - PPC, fix bootstrap creation, formatting sequence 2001/05/25 siegel * share/po/de.po: updated time moved to UTF-8 2001/05/24 Pablo Saratxaga * share/po/tr.po: updated Turkish file 2001/05/24 Pixel * install_any.pm (g_auto_install): autoExitInstall set if not replay (was the opposite) 2001/05/23 Pixel * rescue/list: add scd0... 2001/05/22 siegel * share/po/de.po: updates 2001/05/21 Stew Benedict * tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation of PPC boot CD on x86 platform 2001/05/18 Guillaume Cottenceau * mdk-stage1/network.c: - better detect when IP is not good - error_msg when netmask seems invalid - don't log too much `guessing netmask' * mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits each 2001/05/17 Franois Pons * rescue/tree/etc/oem: fixed parted that ask for confirmation if partition table is not right (MAXDATA for example), this cause parted to ignore warning. added blank space between partition windows and linux to help resolving above case. fixed hole in partitionning (need testing), use fdisk to get disk geometry and create partition that matches cylinder boundaries (no more approximation). make sure to create all partitions including /home. 2001/05/17 Guillaume Cottenceau * mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers don't write nonsense code to separate frontend from stage1, but rather, try to do some clever things * mdk-stage1/probing.c: unify user notification of network and scsi devices that make load of drivers don't write nonsense code to separate frontend from stage1, but rather, try to do some clever things * mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h, mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c, mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c, mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to separate frontend from stage1, but rather, try to do some clever things * mdk-stage1/frontend-common.c: plop 2001/05/16 dam's * pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png, pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png, pixmaps/bootdisk.png, pixmaps/services.png: added icons * standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot, standalone/draksec, standalone/drakxservices, standalone/drakgw, standalone/XFdrake, standalone/adduserdrake: added icon management * my_gtk.pm, interactive.pm: icons management * install2.pm: added icons management * standalone/draknet: added icon managment * pixmaps/printer.png: added icon 2001/05/16 Franois Pons * rescue/tree/etc/oem: added support for /var creation, and more specific package selection for server. Include option support by VERSION file. 2001/05/16 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h, mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h, mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README, mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff and code from stage1 2001/05/16 Pablo Saratxaga * share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po: updated Turkish file 2001/05/16 Pixel * share/po/Makefile: fix yet again DrakX.pot making * partition_table.pm: re-add reiserfs as it should add xfs 2001/05/15 Franois Pons * rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be usefull. 2001/05/15 Guillaume Cottenceau * mdk-stage1/Makefile: libresolv deprecated in GLIBC have stage1-full with pcmcia also compile with dietlibc, cool! * mdk-stage1/network.c: fix guess netmask configure_net_device is only used internally * mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling interface (use of enum rather than guessing single numbers..) * mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines * mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile with dietlibc, cool! - build glibc and dietlibc targets - bzero string buffer before sscanf call (dietlibc implementation) - verify returns of ioperm so that I can use it in test mode * mdk-stage1/dietlibc/include/sys/file.h, mdk-stage1/dietlibc/include/sys/io.h, mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia also compile with dietlibc, cool! * mdk-stage1/stage1.c: a bit of size reduction plus some language change blurk * mdk-stage1/WHY-DIETLIBC: advocate dietlibc * mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author * mdk-stage1/disk.c: bzero string buffer before sscanf call, security for dietlibc implementation * mdk-stage1/network.h: configure_net_device is only used internally * mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: - build glibc and dietlibc targets - bzero string buffer before sscanf call (dietlibc implementation) - verify returns of ioperm so that I can use it in test mode * standalone/drakgw: full path for iptables * mdk-stage1/probing.c: allow wait_message calls to be multi-lines nicer layout for PCI detection messages better modules handling interface (use of enum rather than guessing single numbers..) 2001/05/15 Pablo Saratxaga * share/po/tr.po, share/po/ar.po: Updated Turkish file * share/keyboards.tar.bz2: Added north-african keyboard * keyboard.pm: added arabic azerty keyboard 2001/05/15 Pixel * share/po/Makefile: fix messages to i18n extracting 2001/05/14 Chmouel Boudjnah * fs.pm: s|mkxfs|mkfs.xfs|; 2001/05/14 Guillaume Cottenceau * mdk-stage1/nfsmount.c: use new gethostby* interface * mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data which provides the busybox * mdk-stage1/network.c: Have the wait_message() with the sleep() - complies to gethostby functions - add sleep(2) so that net intf is really up before operation - more logs - FTP: don't try to close control connection with data socket, erhm :-( - debug netmask guessing, with stdio-frontend * mdk-stage1/Makefile: i can compile slang and newt with dietlibc now every targets build with dietlibc * mdk-stage1/make_boot_img: use busybox for my debugging purpose * mdk-stage1/tools.c: no need to poll() for data at beginning of load_ramdisk_fd, it was a fix of another problem (bug with file stdio operations with sockets in dietlibc) * mdk-stage1/dietlibc/Makefile: build this new dietlibc import new version of dietlibc * mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions provided by dietlibc * mdk-stage1/url.c: use poll() rather than select(), smaller code size * mdk-stage1/stage1.c: we don't use this sucking sash no more we now use `busybox' compiled with the marvellous dietlibc, which provides no less than 73 usefull binaries * mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c, mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c, mdk-stage1/dietlibc/include/sys/ipc.h, mdk-stage1/dietlibc/alpha/sendmsg.S, mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c, mdk-stage1/dietlibc/sparc/__testandset.S, mdk-stage1/dietlibc/syscalls.s/open.S, mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h, mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S, mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h, mdk-stage1/dietlibc/include/sys/syscall.h, mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c, mdk-stage1/dietlibc/syscalls.s/ptrace.s, mdk-stage1/dietlibc/lib/isprint.c, mdk-stage1/dietlibc/syscalls.s/dietstat.S, mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c, mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h, mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c, mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S, mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c, mdk-stage1/dietlibc/include/sys/sem.h, mdk-stage1/dietlibc/syscalls.s/query_module.S, mdk-stage1/dietlibc/lib/strchr.c, mdk-stage1/dietlibc/syscalls.s/dietfstat64.S, mdk-stage1/dietlibc/syscalls.s/lstat64.S, mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c, mdk-stage1/dietlibc/lib/perror.c, mdk-stage1/dietlibc/include/sys/socket.h, mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c, mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c, mdk-stage1/dietlibc/include/utmp.h, mdk-stage1/dietlibc/syscalls.s/sendfile.S, mdk-stage1/dietlibc/syscalls.s/nice.S, mdk-stage1/dietlibc/syscalls.s/sigprocmask.S, mdk-stage1/dietlibc/syscalls.s/select.S, mdk-stage1/dietlibc/include/sys/mtio.h, mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S, mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S, mdk-stage1/dietlibc/lib/__telldir.c, mdk-stage1/dietlibc/i386/__testandset.S, mdk-stage1/dietlibc/lib/remove.c, mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S, mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c, mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c, mdk-stage1/dietlibc/include/sys/un.h, mdk-stage1/dietlibc/alpha/connect.S, mdk-stage1/dietlibc/include/termios.h, mdk-stage1/dietlibc/lib/sigfillset.c, mdk-stage1/dietlibc/lib/sigismember.c, mdk-stage1/dietlibc/syscalls.s/dietstat64.S, mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c, mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c, mdk-stage1/dietlibc/lib/tcsetpgrp.c, mdk-stage1/dietlibc/sparc/Makefile.add, mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S, mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c, mdk-stage1/dietlibc/include/inttypes.h, mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S, mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c, mdk-stage1/dietlibc/alpha/recvmsg.S, mdk-stage1/dietlibc/syscalls.s/fork.S, mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c, mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S, mdk-stage1/dietlibc/include/features.h, mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c, mdk-stage1/dietlibc/syscalls.s/writev.S, mdk-stage1/dietlibc/lib/fputs.c, mdk-stage1/dietlibc/alpha/sigprocmask.S, mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h, mdk-stage1/dietlibc/syscalls.s/nanosleep.S, mdk-stage1/dietlibc/syscalls.s/creat.S, mdk-stage1/dietlibc/include/sys/sysinfo.h, mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S, mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c, mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c, mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S, mdk-stage1/dietlibc/include/dirent.h, mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c, mdk-stage1/dietlibc/include/net/route.h, mdk-stage1/dietlibc/syscalls.s/exit.S, mdk-stage1/dietlibc/include/pthread.h, mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S, mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c, mdk-stage1/dietlibc/lib/execvp.c, mdk-stage1/dietlibc/syscalls.s/__reboot.S, mdk-stage1/dietlibc/lib/stdin.c, mdk-stage1/dietlibc/syscalls.s/getitimer.S, mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c, mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S, mdk-stage1/dietlibc/sparc/fork.S, mdk-stage1/dietlibc/syscalls.s/__pread.S, mdk-stage1/dietlibc/include/sys/poll.h, mdk-stage1/dietlibc/syscalls.s/personality.S, mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h, mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h, mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c, mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c, mdk-stage1/dietlibc/include/sys/param.h, mdk-stage1/dietlibc/syscalls.s/__getpagesize.S, mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S, mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c, mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h, mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S, mdk-stage1/dietlibc/include/sys/kd.h, mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c, mdk-stage1/dietlibc/syscalls.s/sched_yield.S, mdk-stage1/dietlibc/include/sys/mman.h, mdk-stage1/dietlibc/lib/__readdir.c, mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c, mdk-stage1/dietlibc/alpha/reml.S, mdk-stage1/dietlibc/syscalls.s/fcntl.S, mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c, mdk-stage1/dietlibc/syscalls.s/ipc.S, mdk-stage1/dietlibc/syscalls.s/mlockall.S, mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c, mdk-stage1/dietlibc/include/sys/msg.h, mdk-stage1/dietlibc/syscalls.s/sigsuspend.S, mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h, mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c, mdk-stage1/dietlibc/include/net/if_arp.h, mdk-stage1/dietlibc/lib/execlp.c, mdk-stage1/dietlibc/syscalls.s/stat64.S, mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h, mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c, mdk-stage1/dietlibc/syscalls.s/fstat64.S, mdk-stage1/dietlibc/syscalls.s/sched_setparam.S, mdk-stage1/dietlibc/include/sys/reboot.h, mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c, mdk-stage1/dietlibc/include/sys/sendfile.h, mdk-stage1/dietlibc/include/sys/syslog.h, mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c, mdk-stage1/dietlibc/syscalls.s/sched_getparam.S, mdk-stage1/dietlibc/lib/vsnprintf.c, mdk-stage1/dietlibc/include/signal.h, mdk-stage1/dietlibc/syscalls.s/pause.S, mdk-stage1/dietlibc/include/arpa/inet.h, mdk-stage1/dietlibc/include/sys/wait.h, mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c, mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c, mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c, mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c, mdk-stage1/dietlibc/lib/__ltostr.c, mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c, mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S, mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c, mdk-stage1/dietlibc/lib/htons.c, mdk-stage1/dietlibc/syscalls.s/sigaltstack.S, mdk-stage1/dietlibc/include/sys/resource.h, mdk-stage1/dietlibc/lib/__stat64_cvt.c, mdk-stage1/dietlibc/lib/localtime.c, mdk-stage1/dietlibc/alpha/seteuid.c, mdk-stage1/dietlibc/syscalls.s/stime.S, mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c, mdk-stage1/dietlibc/ppc/Makefile.add, mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c, mdk-stage1/dietlibc/include/net/if.h, mdk-stage1/dietlibc/include/shadow.h, mdk-stage1/dietlibc/lib/__rewinddir.c, mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c, mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h, mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c, mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S, mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c, mdk-stage1/dietlibc/include/regex.h, mdk-stage1/dietlibc/include/sys/ptrace.h, mdk-stage1/dietlibc/lib/tcdrain.c, mdk-stage1/dietlibc/syscalls.s/lstat.S, mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c, mdk-stage1/dietlibc/lib/random.c, mdk-stage1/dietlibc/syscalls.s/times.S, mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c, mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S, mdk-stage1/dietlibc/syscalls.s/dietlstat64.S, mdk-stage1/dietlibc/ppc/__testandset.S, mdk-stage1/dietlibc/include/mntent.h, mdk-stage1/dietlibc/include/sys/file.h, mdk-stage1/dietlibc/syscalls.s/fstat.S, mdk-stage1/dietlibc/syscalls.s/llseek.S, mdk-stage1/dietlibc/lib/strsep.c, mdk-stage1/dietlibc/include/sys/stat.h, mdk-stage1/dietlibc/syscalls.s/munlockall.S, mdk-stage1/dietlibc/syscalls.s/setpriority.S, mdk-stage1/dietlibc/include/assert.h, mdk-stage1/dietlibc/include/strings.h, mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c, mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c, mdk-stage1/dietlibc/ppc/__longjmp.S, mdk-stage1/dietlibc/lib/__closedir.c, mdk-stage1/dietlibc/include/sys/signal.h, mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c, mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore, mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h, mdk-stage1/dietlibc/lib/tm_conv.c, mdk-stage1/dietlibc/syscalls.s/reboot.S, mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S, mdk-stage1/dietlibc/syscalls.s/umount2.S, mdk-stage1/dietlibc/syscalls.s/readv.S, mdk-stage1/dietlibc/lib/__fxstat.c, mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/dietlibc/syscalls.s/syslog.S, mdk-stage1/dietlibc/syscalls.s/sysinfo.S, mdk-stage1/dietlibc/lib/fprintf.c, mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README, mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c, mdk-stage1/dietlibc/syscalls.s/getcwd.S, mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c, mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S, mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S, mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S, mdk-stage1/dietlibc/lib/__opendir.c, mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c, mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c, mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c, mdk-stage1/dietlibc/lib/__getcwd.c, mdk-stage1/dietlibc/include/netinet/in.h, mdk-stage1/dietlibc/lib/shmctl.c, mdk-stage1/dietlibc/syscalls.s/dietlstat.S, mdk-stage1/dietlibc/include/arpa/nameser.h, mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c, mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c, mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S, mdk-stage1/dietlibc/lib/stderr.c, mdk-stage1/dietlibc/syscalls.s/close.S, mdk-stage1/dietlibc/syscalls.s/dietfstat.S, mdk-stage1/dietlibc/include/locale.h, mdk-stage1/dietlibc/syscalls.s/getpriority.S, mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c, mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c, mdk-stage1/dietlibc/include/sys/mount.h, mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S, mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h, mdk-stage1/dietlibc/lib/islower.c, mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c, mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c, mdk-stage1/dietlibc/include/ctype.h, mdk-stage1/dietlibc/include/netdb.h, mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c, mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c, mdk-stage1/dietlibc/syscalls.s/waitpid.S, mdk-stage1/dietlibc/lib/strtoul.c, mdk-stage1/dietlibc/syscalls.s/stat.S, mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc * mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers * mdk-stage1/dietlibc/include/stdio.h, mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/include/math.h, mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile with dietlibc import new version of dietlibc * mdk-stage1/Makefile.common: new dietlibc binaries location * mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc now * mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc * mdk-stage1/dhcp.c: Have the wait_message() with the sleep() - add a sleep(2) after ioctl ifupping so that further operation can work normally - more logs 2001/05/14 kjx * share/po/zh_CN.GB2312.po: process untranslated 2001/05/14 Pixel * fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling 2001/05/11 Franois Pons * tools/oem-prepare: fixed missing package which may be selected on hardware during real install. * rescue/tree/etc/oem: added support to change boot entries when invoking oem script. fixed missing SCSI support and driver module loading. fixed missing speficic packages not installed on HW detected. 2001/05/08 dam's * my_gtk.pm: VBox -> HBox in Embedded mode * standalone/mousedrake: code cleaned and debugged added mouse test. Ugly 2001/05/08 Guillaume Cottenceau * mdk-stage1/stdio-frontend.c: fix minor stuff re-include correct layout for [] choices, in a smaller way than before * mdk-stage1/tools.c: minor fix needs to poll() for available data before loading ramdisk because ftp transfers would fail in some situations * mdk-stage1/init.c: new maxim * mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star is printed when last blocks of file are read * mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS: ---------------------------------------------------------------------- 2001/05/08 siegel * share/po/de.po: fixed plenty ugly typos 2001/05/07 Pablo Saratxaga * share/po/pt_BR.po: updated Brazilian file 2001/05/07 yduret * docs/README.devel: fix one typo * any.pm, bootloader.pm: updated install_lilo() according to new lilo package (/boot/lilo-{menu,graphic,text}) 2001/05/06 dam's * netconnect.pm: corrected bad output and bad adsl script 2001/05/06 Stew Benedict * install2.pm: workaround for msec hang on PPC 2001/05/04 Guillaume Cottenceau * share/rpmsrate: KDE+SOUND -> 4 xmms-arts 2001/05/04 Thierry Vignaud * mdk-stage1/mar/mar-extract-only.c: text size micro-opt 2001/05/04 Guillaume Cottenceau * share/rpmsrate: KDE+SOUND -> 4 xmms-arts 2001/05/04 Stew Benedict * c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC, don't run xmodmap, PPC SMP routine placeholder 2001/05/04 Thierry Vignaud * mdk-stage1/mar/mar-extract-only.c: text size micro-opt 2001/04/30 Guillaume Cottenceau * mdk-stage1/stdio-frontend.c: nicer layout for progressbar and statusreport, when update_progression Provide some description of the drivers * docs/HACKING: fix pserver -> ext * mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h, mdk-stage1/modules.c: Provide some description of the drivers 2001/04/30 Pixel * docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/ * docs/advocacy: fuck'em all 2001/04/26 Franois Pons * docs/README.devel, docs/README: added some more comments for DrakX code source and usage. 2001/04/25 Franois Pons * tools/oem-prepare: fixed use of VERSION file to find language. prepare a oem disk to be used by moving all files that will not be installed by oem (oem-master disk preparation). * rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed usage of free space on disk, added NVIDIA packages to install. * rescue/tree/etc/oem-server: added missing VERSION file. fixed usage of free space on disk, added NVIDIA packages to install. * rescue/tree/etc/oem: added missing autologin package. added option to enable oem mode. added missing VERSION file. fixed usage of free space on disk, added NVIDIA packages to install. 2001/04/24 Guillaume Cottenceau * mdk-stage1/Makefile: version is labelled "cooker" 2001/04/19 Guillaume Cottenceau * tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c: integrate fg's fixes for includes 2001/04/19 Stew Benedict * rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha, rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc 2001/04/18 Guillaume Cottenceau * mdk-stage1/network.c: fix bug that trashes the network config of stage1 during stage2, when no DNS is provided 2001/04/18 dam's * standalone/net_monitor: last corrections * standalone/draknet, netconnect.pm: last corrections corrected internet connection test, and parameters editing * install_steps_gtk.pm: corrected cursor on details 2001/04/18 Frederic Lepied * share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE * drakprofile in level 1 * swapped tkinter and python-devel * vnc-server in NETWORKING_REMOTE_ACCESS_SERVER * vnc-SVGALIB in level 2 2001/04/17 dam's * standalone/mousedrake: fixed embedded * bootlook.pm: chmoded autologin 2001/04/17 Franois Pons * any.pm: restored grub as everything seems fine. * rescue/tree/etc/oem-server: fixed swap size instead of inst size for swap gap. make sure kernel will be selected. * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. make sure kernel is selected. * install_steps_interactive.pm: fixed missing mouse update in summary. 2001/04/17 Guillaume Cottenceau * share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV 2001/04/17 Pablo Saratxaga * standalone/draknet: fixed typo * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Basque file 2001/04/17 Pixel * install_steps_interactive.pm (setRootPassword): better ensure 'broadcast' insteaf of overriding (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still means no NIS * any.pm (setupBootloader): remove a warning 2001/04/17 warly * share/rpmsrate: put MAKEDEV at end of line 2001/04/17 dam's * standalone/mousedrake: fixed embedded * bootlook.pm: chmoded autologin 2001/04/17 Franois Pons * any.pm: restored grub as everything seems fine. * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. make sure kernel is selected. fixed parted problem. * rescue/tree/etc/oem-server: fixed swap size instead of inst size for swap gap. make sure kernel will be selected. * install_steps_interactive.pm: fixed missing mouse update in summary. 2001/04/17 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Basque file 2001/04/17 Pixel * install_steps_interactive.pm (setRootPassword): better ensure 'broadcast' insteaf of overriding (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still means no NIS * any.pm (setupBootloader): remove a warning 2001/04/17 dam's * bootlook.pm: chmoded autologin 2001/04/17 Franois Pons * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. make sure kernel is selected. fixed parted problem. * rescue/tree/etc/oem-server: fixed swap size instead of inst size for swap gap. make sure kernel will be selected. 2001/04/17 Pixel * install_steps_interactive.pm (setRootPassword): better ensure 'broadcast' insteaf of overriding (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still means no NIS * any.pm (setupBootloader): remove a warning 2001/04/17 dam's * bootlook.pm: chmoded autologin 2001/04/17 Franois Pons * rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap. make sure kernel is selected. fixed parted problem. * rescue/tree/etc/oem-server: fixed swap size instead of inst size for swap gap. make sure kernel will be selected. 2001/04/17 Pixel * install_steps_interactive.pm (setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still means no NIS * any.pm (setupBootloader): remove a warning 2001/04/16 dam's * any.pm: removed Grub if Embedded 2001/04/16 dam's * netconnect.pm: minor bug. * any.pm: removed Grub if Embedded 2001/04/16 dam's * standalone/net_monitor: updated updated * network.pm: dhcpd -> dhcpcd * Xconfigurator.pm: added nice monitor.png * netconnect.pm: minor bug. dhcpd -> dhcpcd * standalone/draknet: updated * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop removed for readd in kb * my_gtk.pm: corrected typo added grey fix for contreol-center 2001/04/16 Franois Pons * rescue/tree/etc/oem: added missing rio500 in closure. finally fixed menu by generating /etc/rpm/macros file. added missing LF. now fixed menu problems. try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of fr:fr_FR. really disable server. maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french). fixed to avoid nasty message in wrong places. moved warning message around. fixed wrong LOCALES"...". fixed lang weirdness, fixed minimal size of / partition to be more confortable, fixed default language for starting DrakX after. * Xconfig.pm: fixed standalone error for wacom weirdness. fixed HASH() in /etc/X11/XF86Config*. * fs.pm: restored not neccessary to load reiserfs for formating. loading reiserfs module before formatting. 2001/04/16 Guillaume Cottenceau * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for XFdrake * mdk-stage1/TECH-INFOS: update doc * share/po/fr.po: fix minor thing 2001/04/16 Pixel * share/compssUsers: remove BURNER from Utilities 2001/04/16 warly * share/rpmsrate: lower portsentry 2001/04/16 dam's * Xconfigurator.pm: added nice monitor.png * standalone/net_monitor: updated * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop removed for readd in kb * my_gtk.pm: corrected typo added grey fix for contreol-center 2001/04/16 Franois Pons * Xconfig.pm: fixed standalone error for wacom weirdness. fixed HASH() in /etc/X11/XF86Config*. * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french). fixed to avoid nasty message in wrong places. moved warning message around. fixed wrong LOCALES"...". fixed lang weirdness, fixed minimal size of / partition to be more confortable, fixed default language for starting DrakX after. 2001/04/16 Guillaume Cottenceau * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for XFdrake 2001/04/16 Pixel * share/compssUsers: remove BURNER from Utilities 2001/04/16 warly * share/rpmsrate: lower portsentry 2001/04/16 dam's * standalone/draknet: bugfix added update thread corrected bad install package. updated expert mode * network.pm, install_steps.pm: corrected bad install package. * Xconfigurator.pm: added nice monitor.png * tinyfirewall.pm: corrected package installation * standalone/net_monitor: updated * pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png, pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png, pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png, pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png, pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png, pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png, pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop removed for readd in kb * my_gtk.pm: corrected typo added grey fix for contreol-center * netconnect.pm: debug corrected bad install package. 2001/04/16 Franois Pons * Xconfig.pm: fixed standalone error for wacom weirdness. fixed HASH() in /etc/X11/XF86Config*. * rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french). fixed to avoid nasty message in wrong places. moved warning message around. fixed wrong LOCALES"...". fixed lang weirdness, fixed minimal size of / partition to be more confortable, fixed default language for starting DrakX after. 2001/04/16 Guillaume Cottenceau * pixmaps/monitor-800.png, pixmaps/monitor-1024.png, pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for XFdrake 2001/04/16 Pixel * share/compssUsers: remove BURNER from Utilities * install_any.pm (g_auto_install): do not take 'mkbootdisk' 2001/04/16 warly * share/rpmsrate: lower portsentry 2001/04/15 fabman * share/po/es.po: updates 2001/04/15 Guillaume Cottenceau * share/po/fr.po: fix minor typo 2001/04/15 Pablo Saratxaga * share/po/gl.po: updated Galician file 2001/04/15 Pixel * install_steps_gtk.pm (reallyChooseGroups): translate path (eg: Workstation, Server) to make gg happy 2001/04/15 fabman * share/po/es.po: updates 2001/04/15 fcrozat * share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories 2001/04/15 Guillaume Cottenceau * share/po/fr.po: fix minor typo 2001/04/15 Pablo Saratxaga * share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files 2001/04/15 Pixel * install_steps_gtk.pm (reallyChooseGroups): translate path (eg: Workstation, Server) to make gg happy * printerdrake.pm (main): restore the "Ok" button for the queues manipulation * any.pm (write_passwd_user): fix use of local * interactive.pm (ask_from_entries_refH_powered_normalize): add an eval around "require log" to keep perl from going totally mad (getting things like v18.843.482 required--this is only v5.6.0) 2001/04/15 yduret * bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to mcc normally fix layout & size 2001/04/14 dam's * netconnect.pm: corrected isdn detect display * standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7 2001/04/14 Franois Pons * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate selection of packages. * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. 2001/04/14 Pixel * pkgs.pm (naughtyServers): add apache * install_gtk.pm (createXconf): ensure the mouse device is created (mainly for auto_inst) * install_steps_interactive.pm (exitInstall): fix bad i18n of Replay button (thx2submarine) 2001/04/14 warly * share/rpmsrate: lower viavoicemenu to 1 to avoid error message for powerpack boxes without ViaVoice 2001/04/14 Franois Pons * rescue/tree/etc/oem: changed priority level from 2 to 4 for rate selection of packages. * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. 2001/04/14 Pixel * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's test) * Xconfigurator.pm (use vars): fix stew sux (testFinalConfig): nicer stderr handling * interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code 2001/04/14 Franois Pons * install_any.pm: fixed to gzip synthesis file. safe guard generation of synthesis file. fixed umask on urpmi list file and generate synthesis file for each hdlist. * pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare. 2001/04/14 Pixel * install_steps_interactive.pm (configureX): fix link /etc/gtk (to /mnt/etc/gtk) instead of /etc/gtkrc * any.pm (autologin): spurious messages of chksession -> dave nul * interactive_newt.pm (exit): fix the exit code (wait_message_endW): don't log "none stacked wait-messages" (as a lot of them exist...) (waitbox): remove spurious '0' in wait_messages * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's test) * Xconfigurator.pm (use vars): fix stew sux (testFinalConfig): nicer stderr handling * interactive_gtk.pm (exit): fix the exit code 2001/04/14 warly * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser and list 2001/04/14 Franois Pons * install_any.pm: fixed to gzip synthesis file. safe guard generation of synthesis file. fixed umask on urpmi list file and generate synthesis file for each hdlist. 2001/04/14 Pixel * install_steps_interactive.pm (configureX): fix link /etc/gtk (to /mnt/etc/gtk) instead of /etc/gtkrc * any.pm (autologin): spurious messages of chksession -> dave nul * interactive_newt.pm (exit): fix the exit code (wait_message_endW): don't log "none stacked wait-messages" (as a lot of them exist...) (waitbox): remove spurious '0' in wait_messages * lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's test) * Xconfigurator.pm (use vars): fix stew sux (testFinalConfig): nicer stderr handling * interactive_gtk.pm (exit): fix the exit code 2001/04/14 Stew Benedict * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse setup for PPC 2001/04/14 warly * share/compssUsers, share/list, share/rpmsrate: add icons in compssUser and list 2001/04/13 dam's * netconnect.pm: net_cnx_up/down xritten in neuneu * Xconfigurator.pm: corrected updated updated message * standalone/draknet: message corrected 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still opened). 2001/04/13 Pablo Saratxaga * share/po/no.po: Updated Norwegian file Updated po files * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files 2001/04/13 Pixel * Xconfigurator.pm (main): reverse message * install_steps_gtk.pm (installPackages): hide Details button sooner (installPackages): do not show button "Details" when no advertising * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for ru(winkeys), it is redondant * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250 * any.pm (ask_users): do not have an empty icon. better not ask for icon if no icon 2001/04/13 siegel * share/po/de.po: updates 2001/04/13 dam's * netconnect.pm: net_cnx_up/down xritten in neuneu * Xconfigurator.pm: corrected updated updated message * standalone/draknet: message corrected 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still opened). * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is available. fixed very old typo not encountered before; 2001/04/13 Pixel * Xconfigurator.pm (main): reverse message * install_steps_gtk.pm (installPackages): hide Details button sooner (installPackages): do not show button "Details" when no advertising * Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for ru(winkeys), it is redondant * interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250 * any.pm (ask_users): do not have an empty icon. better not ask for icon if no icon 2001/04/13 warly * share/compssUsers: add ssh server in Network Computer Server 2001/04/13 dam's * netconnect.pm: net_cnx_up/down xritten in neuneu * Xconfigurator.pm: corrected updated updated message * standalone/draknet: message corrected 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is available. fixed very old typo not encountered before; 2001/04/13 Pixel * common.pm (backtrace): created * install_steps_interactive.pm (addUser): remove the setting of $o->{autologin}, now done in any::autologin * install_steps_gtk.pm (installPackages): hide Details button sooner (installPackages): do not show button "Details" when no advertising * install2.pm (miscellaneous): add setting KEYBOARD=yes in /etc/sysconfig/usb as asked by Lord Chmou * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty list instead of dying (for 8.0 only, should be switched back to die) (ask_from_listf): display the backtrace when empty list * any.pm (ask_users): add the empty icon (autologin): fix 2001/04/13 warly * share/compssUsers: add ssh server in Network Computer Server 2001/04/13 dam's * Xconfigurator.pm: updated updated message * netconnect.pm: net_cnx_up/down xritten in neuneu * standalone/draknet: message corrected 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is available. fixed very old typo not encountered before; 2001/04/13 Pixel * common.pm (backtrace): created * install_steps_interactive.pm (addUser): remove the setting of $o->{autologin}, now done in any::autologin * install2.pm (miscellaneous): add setting KEYBOARD=yes in /etc/sysconfig/usb as asked by Lord Chmou * install_steps_gtk.pm (installPackages): do not show button "Details" when no advertising * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty list instead of dying (for 8.0 only, should be switched back to die) (ask_from_listf): display the backtrace when empty list * any.pm (ask_users): add the empty icon (autologin): fix 2001/04/13 warly * share/compssUsers: add ssh server in Network Computer Server 2001/04/13 dam's * Xconfigurator.pm: updated updated message * netconnect.pm: net_cnx_up/down xritten in neuneu * standalone/draknet: message corrected 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is available. fixed very old typo not encountered before; 2001/04/13 Pixel * common.pm (backtrace): created * install_steps_interactive.pm (addUser): remove the setting of $o->{autologin}, now done in any::autologin * install2.pm (miscellaneous): add setting KEYBOARD=yes in /etc/sysconfig/usb as asked by Lord Chmou * install_steps_gtk.pm (installPackages): do not show button "Details" when no advertising * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty list instead of dying (for 8.0 only, should be switched back to die) (ask_from_listf): display the backtrace when empty list * any.pm (ask_users): add the empty icon (autologin): fix 2001/04/13 warly * share/compssUsers: add ssh server in Network Computer Server 2001/04/13 dam's * Xconfigurator.pm: updated updated message * standalone/draknet: message corrected updated * netconnect.pm: net_cnx_up/down xritten in neuneu * bootlook.pm: embedded = 0 -> local 2001/04/13 fabman * share/po/es.po: synchro with EN 2001/04/13 Franois Pons * install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is available. fixed very old typo not encountered before; 2001/04/13 Pixel * common.pm (backtrace): created * install_steps_interactive.pm (addUser): remove the setting of $o->{autologin}, now done in any::autologin * install2.pm (miscellaneous): add setting KEYBOARD=yes in /etc/sysconfig/usb as asked by Lord Chmou * install_steps_gtk.pm (installPackages): do not show button "Details" when no advertising * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty list instead of dying (for 8.0 only, should be switched back to die) (ask_from_listf): display the backtrace when empty list * any.pm (ask_users): add the empty icon (autologin): fix 2001/04/13 warly * share/compssUsers: add ssh server in Network Computer Server add DATABASES to Database add icons for server 2001/04/13 dam's * network.pm: updated wireless configuration * netconnect.pm: corrected loop in isdn + other things * bootlook.pm: embedded = 0 -> local * standalone/draknet: updated added delete event 2001/04/13 Franois Pons * netconnect.pm: fixed syntax error :-) * install_steps.pm, install_steps_gtk.pm: added conditional update-menus if package are installed. * install_steps_interactive.pm: added conditional update-menus if package are installed. make sure update-menus is called after installing cups related packages. 2001/04/13 Pablo Saratxaga * share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated Croatian and Swedish files * share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po, share/po/is.po, share/po/cs.po: Removed po files with too low leve lof translating ( < 60% ) so they are not included on final CD 2001/04/13 Pixel * common.pm (backtrace): created * install_steps_interactive.pm (addUser): remove the setting of $o->{autologin}, now done in any::autologin * bootlook.pm: don't use Locale::GetText, use DrakX's i18n * install2.pm (miscellaneous): add setting KEYBOARD=yes in /etc/sysconfig/usb as asked by Lord Chmou * interactive.pm (ask_from_entries_refH_powered_normalize): log the empty list instead of dying (for 8.0 only, should be switched back to die) (ask_from_listf): display the backtrace when empty list * my_gtk.pm (new): make dams happy * any.pm (ask_users): add the empty icon (autologin): fix 2001/04/13 warly * share/compssUsers: add DATABASES to Database add icons for server 2001/04/12 Guillaume Cottenceau * mdk-stage1/dhcp.c: remove unnecessary redhat history code 2001/04/12 Franois Pons * install_any.pm: fixed wrong kernel version extraction (typically for upgrade). * install_steps_interactive.pm: removed Cancel of Summary. fixed ask printer configuration. * detect_devices.pm: fix Hewlett-Packard to HP in case. * standalone/printerdrake: never ask to configure a printer in standalone. * printerdrake.pm: automatically add a queue if nothing exists. fixed ask to configure a printer. * interactive.pm: removed strict die on empty list. * live_install2: added some gtk and gdk_imlib missing variables. * live_install: removed gtk variable for data, moved to second script. * modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of packdrake. 2001/04/12 Guillaume Cottenceau * mdk-stage1/dhcp.c: remove unneeded #define * standalone/drakgw: add some rule so later on tinyfirewall will not prevent everything from working * share/po/fr.po: minor fix write some ppc translations 2001/04/12 Pablo Saratxaga * share/po/it.po: Updated Italian file 2001/04/12 Pixel * printer.pm: use run_program and remove "require run_program"s * my_gtk.pm (main): only accept X (gdk) events key_press, key_release and exposure (so that not to receive motion_notify which would generate focus_out in non-interesting cases) * interactive.pm (ask_from_entries_refH_powered_normalize): fix the test for empty lists (ask_from_entries_refH_powered_normalize): - when not_edit and empty list, die. - when not_edit and single element list, don't display that entry. * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" * modules.pm (configure_pcmcia): better handling for not running cardmgr many times (configure_pcmcia): always run cardmgr so that it is run even if stage1 did create a /var/run/stab. This is just a try :-/ 2001/04/12 dam's * netconnect.pm: if neuneu but explicited clicked, don't skip corrected pcmcia driver 2001/04/12 Franois Pons * install_steps_interactive.pm: removed Cancel of Summary. fixed ask printer configuration. * common.pm: improved bestMatchSentence2. * detect_devices.pm: fix Hewlett-Packard to HP in case. * standalone/printerdrake: never ask to configure a printer in standalone. * printerdrake.pm: automatically add a queue if nothing exists. fixed ask to configure a printer. * interactive.pm: removed strict die on empty list. * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of packdrake. 2001/04/12 Guillaume Cottenceau * standalone/drakgw: add some rule so later on tinyfirewall will not prevent everything from working * share/po/fr.po: write some ppc translations un-dadouize a problem 2001/04/12 Pablo Saratxaga * share/po/it.po: Updated Italian file 2001/04/12 Pixel * install_steps_gtk.pm (installPackages): fix no advertising with less than 20MB of packages * interactive.pm (ask_from_entries_refH_powered_normalize): - when not_edit and empty list, die. - when not_edit and single element list, don't display that entry. * install_steps_interactive.pm (configureX): fix for X test at install with exotic fonts * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" * modules.pm (configure_pcmcia): better handling for not running cardmgr many times (configure_pcmcia): always run cardmgr so that it is run even if stage1 did create a /var/run/stab. This is just a try :-/ 2001/04/12 dam's * bootlook.pm: corrected typo added use bootloader * standalone/net_monitor: typo * netconnect.pm: if neuneu but explicited clicked, don't skip corrected pcmcia driver corrected typo * lang.pm: pixel sux * network.pm, standalone/draknet: corrected network connection * my_gtk.pm: corrected set_modal 2001/04/12 fabman * share/po/es.po: updated spanish .po files 2001/04/12 Franois Pons * install_steps_interactive.pm: removed Cancel of Summary. fixed ask printer configuration. * common.pm: improved bestMatchSentence2. * detect_devices.pm: fix Hewlett-Packard to HP in case. * standalone/printerdrake: never ask to configure a printer in standalone. * printerdrake.pm: automatically add a queue if nothing exists. fixed ask to configure a printer. * modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of packdrake. 2001/04/12 Guillaume Cottenceau * share/po/fr.po: un-dadouize a problem sync 2001/04/12 Pablo Saratxaga * share/po/sp.po, share/po/fi.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po, share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po, share/po/id.po: Updated Chinese file * share/po/it.po: Updated Italian file Updated Chinese file 2001/04/12 Pixel * install_steps_gtk.pm (installPackages): fix no advertising with less than 20MB of packages * interactive.pm (ask_from_entries_refH_powered_normalize): - when not_edit and empty list, die. - when not_edit and single element list, don't display that entry. * install_steps_interactive.pm (configureX): fix for X test at install with exotic fonts * lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu" * modules.pm (configure_pcmcia): better handling for not running cardmgr many times (configure_pcmcia): always run cardmgr so that it is run even if stage1 did create a /var/run/stab. This is just a try :-/ 2001/04/12 siegel * share/po/de.po: new german version 2001/04/12 yduret * bootlook.pm: added some stuff 2001/04/11 dam's * my_gtk.pm: no setmodal 0 if wizard 2001/04/12 dam's * bootlook.pm: corrected typo added use bootloader * netconnect.pm: corrected typo 2001/04/12 fabman * share/po/es.po: updated spanish .po files 2001/04/12 siegel * share/po/de.po: new german version 2001/04/11 dam's * share/themes-mdk.rc: tooltips * netconnect.pm: updated * my_gtk.pm: no setmodal 0 if wizard 2001/04/11 Pixel * install_steps_gtk.pm (reallyChooseGroups): relook * install_steps_interactive.pm (chooseGroups): warn if chosen size is too big * share/compssUsers: adapt for new profile choosing layout 2001/04/11 yduret * bootlook.pm: bug fix in autologin 2001/04/11 dam's * share/themes-mdk.rc: tooltips * bootlook.pm: updated corrected * tinyfirewall.pm: installation of package : not at the same place * netconnect.pm: updated added driver for pcmcia, corrected eth conf for pppoe 2001/04/11 Franois Pons * install_any.pm: added missing LD_LOADER for calling rpm. * printerdrake.pm: fixed probe on kernel 2.4. make printer devices more accurate. removed limitation to only one port probed * pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on upgrade. * detect_devices.pm: avoid need of shell for live upgrade on serial_probe (removed 2>/dev/null which is not necessary). fixed printer probe (usb and parallel). * mouse.pm: fix wacom usb tablet * standalone/printerdrake: added missing take into account of /etc/modules.conf * lang.pm: added missing LD_LOADER reference and remove old code commented. 2001/04/11 Guillaume Cottenceau * share/po/fr.po: unfuzzyize sync with new msg in services.pm and compssUsers sync with pablo update fixes of translations write the shitload of untranslated and fuzzy msg * standalone/tinyfirewall: i18n title * services.pm: have many more services tooltipped from here so we can get translations afterwards * share/compssUsers: fix typos of rpmsrate groups * standalone/drakgw: kosmetik do i18n for title also 2001/04/11 Pablo Saratxaga * share/rpmsrate: Added reference to netscape-chinese_big5 file * share/po/DrakX.pot, share/po/wa.po: Updated Walloon file Updated po files Updated Slovak, Walloon and Polish files * share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po, share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po, share/po/ca.po, share/po/cs.po: Updated po files Updated Slovak, Walloon and Polish files * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po, share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files 2001/04/11 Pixel * run_program.pm (rooted): don't call install_any::check_prog if rooted * standalone/drakboot: make it work (why was bootloader::install commented?) * share/compssUsers: adapt for new profile choosing layout * Makefile: take cardmgr-* * install_steps_interactive.pm (chooseGroups): warn if chosen size is too big translate the ``path'' in profile selection * share/po/i18n_compssUsers: relooking * any.pm (setupBootloader): translate the bootloaders to use (setupBootloader): nicer look&feel * install_any.pm (fsck_option): add a closing ``"'' so that strings to i18n extraction works (fsck_option): add a closing ``"'' so that strings to i18n extraction works (check_prog): make it work * install_steps_gtk.pm (reallyChooseGroups): relook (installPackages): pressing "Details" gives you more detailed info (reallyChooseGroups): start relooking (installPackages): don't display advertising if less 20MB of packages translate the ``path'' in profile selection 2001/04/11 warly * share/compssUsers: Add descr for servers 2001/04/11 Franois Pons * printerdrake.pm: make printer devices more accurate. removed limitation to only one port probed * mouse.pm: fix wacom usb tablet * standalone/printerdrake: added missing take into account of /etc/modules.conf * detect_devices.pm: fixed printer probe (usb and parallel). 2001/04/11 Guillaume Cottenceau * services.pm: have many more services tooltipped from here so we can get translations afterwards * share/po/fr.po: write the shitload of untranslated and fuzzy msg * share/compssUsers: fix typos of rpmsrate groups 2001/04/11 Pixel * run_program.pm (rooted): don't call install_any::check_prog if rooted * diskdrake.pm (More): fix exception relaunching * install_any.pm (check_prog): make it work * any.pm (setupBootloader): nicer look&feel * standalone/drakboot: make it work (why was bootloader::install commented?) * Makefile: take cardmgr-* 2001/04/11 fabman * share/po/es.po: updated spanish .po file 2001/04/11 Franois Pons * printerdrake.pm: make printer devices more accurate. removed limitation to only one port probed * mouse.pm: fix wacom usb tablet * standalone/printerdrake: added missing take into account of /etc/modules.conf * detect_devices.pm: fixed printer probe (usb and parallel). 2001/04/11 Guillaume Cottenceau * share/po/fr.po: write the shitload of untranslated and fuzzy msg 2001/04/11 Pixel * tools/make_mdkinst_stage2: to lighten mdkinst_stage2: - completly remove po's (will be getFile'd) - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd) * standalone/drakboot: make it work (why was bootloader::install commented?) * share/aliases: add rmmod -> insmod_ * lang.pm (get_x_fontset): special cases for some big (size) fonts * Makefile: take cardmgr-* * install_any.pm (check_prog): make it work (check_prog): if a prog isn't available, try to fetch it via getFile (remove_bigseldom_used): created, purpose: remove unneeded stuff on stage2 to allow a getAndSaveFile. (getAndSaveFile): if only one arg is given, assume the name is the same * standalone/XFdrake: fix bug for running xfs * any.pm (setupBootloader): nicer look&feel * diskdrake.pm (More): fix exception relaunching check resize_reiserfs is there or get it * run_program.pm (rooted): don't call install_any::check_prog if rooted in install, call install_any::check_prog to allow shadow progs which are fetched when needed via getFile * share/list: remove rmmod (is now a symlink) 2001/04/11 siegel * share/po/de.po: updated german version 2001/04/10 Pablo Saratxaga * share/po/ca.po: Updated Catalan file 2001/04/10 Pixel * Makefile: - fix wiz_*.png removing - fix copying cardmgr* which included cardmgr.o 2001/04/11 Pixel * tools/make_mdkinst_stage2: to lighten mdkinst_stage2: - completly remove po's (will be getFile'd) - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd) * standalone/XFdrake: fix bug for running xfs * diskdrake.pm: check resize_reiserfs is there or get it * share/aliases: add rmmod -> insmod_ * install_any.pm (check_prog): if a prog isn't available, try to fetch it via getFile (remove_bigseldom_used): created, purpose: remove unneeded stuff on stage2 to allow a getAndSaveFile. (getAndSaveFile): if only one arg is given, assume the name is the same * share/list: remove rmmod (is now a symlink) * run_program.pm: in install, call install_any::check_prog to allow shadow progs which are fetched when needed via getFile * lang.pm (get_x_fontset): special cases for some big (size) fonts 2001/04/10 dam's * netconnect.pm: corrected bad network restart * my_gtk.pm: corrected bad font * network.pm: get rid of ifcfg- minor correction 2001/04/10 Franois Pons * install_steps_interactive.pm: fixed selection of CDs. * devices.pm: added input/event class of devices (necessary for usb wacom at install) 2001/04/10 Guillaume Cottenceau * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/mkinitrd_helper/Makefile: - honour quiet mode at boot time - fake modprobe to shut up kmod * bootlook.pm: do not use french in i18n'ed msg yvounet!! * standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth interoperation with bastille-firewall 2001/04/10 Pablo Saratxaga * share/po/cs.po: Updated Czech file Updated po files * share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated Indonesian, Japanese, Korean and Vietnamese files Updated po files * share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing translatable string Updated po files * share/po/ca.po: Updated Catalan file Updated po files * share/locales.tar.bz2: Added missing file for Vietnamese * share/po/bg.po: Updated Bulgarian file Updated po files * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files 2001/04/10 Pixel * interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq '') (create_boxradio): handle double_click (ask_from_entries_refW): use radio boxes instead of list/clist if small number of choices (create_ctree): handle single click on node opens the node * my_gtk.pm: create and use gtkset_tip (_create_window): XSetInputFocus done only on expose_event of the topmost window (new): ensure only one modal * Xconfigurator.pm (main): have an "Ok" button to leave * install_steps_gtk.pm: use gtkset_tip (choosePackagesTree): fix "Show automatically selected packages" create and use gtkset_tip * Makefile: - fix wiz_*.png removing - fix copying cardmgr* which included cardmgr.o 2001/04/10 warly * share/rpmsrate: add viavoicemenu_{us,gr,fe} 2001/04/10 yduret * bootlook.pm: grub/lilo mode 2001/04/10 dam's * netconnect.pm: corrected bad network restart * my_gtk.pm: corrected bad font * network.pm: get rid of ifcfg- minor correction 2001/04/09 dam's * tinyfirewall.pm: typo 2001/04/09 Pixel * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs size as the check is done before rounding. * bootloader.pm (install_grub): altconfigfile only if /boot is not reiserfs :-/ * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many modules.cz) * install_any.pm (setPackages): also have SOUND set in compssUsersChoice based on pciusbtable * share/compssUsers, share/rpmsrate: - SOUND is now a flag - AUDIO is the group 2001/04/09 siegel * tinyfirewall.pm: i18n fixes 2001/04/09 Franois Pons * rescue/tree/etc/oem: fixes of grub installation using hd.img fix the fix for loopback mounting of hd.img. * Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth. * pkgs.pm: changed transaction error management this way: if a transaction fails, DrakX tries to make as many transaction as there are package that have failed to be installed (this means one transaction of only one package). This help installing most package that are correct (as a transaction that failed cause all remaining package to be not installed). 2001/04/09 Guillaume Cottenceau * mdk-stage1/Makefile: 8.0rc -> 8.0 * rescue/tree/etc/oem: fix english thanks to Kevin * standalone/drakgw: do not die when an initscript returns non-0 (initscripts too buggy) 2001/04/09 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Danish file * any.pm: changed ISO_8859-1 TO ISO-8859-1 2001/04/09 Pixel * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings, use it for kdm message * diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs size as the check is done before rounding. * bootloader.pm (install_grub): altconfigfile only if /boot is not reiserfs :-/ * tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many modules.cz) * install2.pm (main): sets umask (seems like default one is no more 022, kernel change?) * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel (especially for abnt2 (br)) * install_any.pm (setPackages): also have SOUND set in compssUsersChoice based on pciusbtable * share/compssUsers, share/rpmsrate: - SOUND is now a flag - AUDIO is the group * lang.pm (load_po): sets $lang::charset to the charset used in the po 2001/04/09 siegel * share/po/de.po: fixes * Xconfigurator.pm: fixed i18n bug 2001/04/09 yduret * standalone/tinyfirewall: button policy (thx gc) * standalone/drakgw: deyvounification : remove some un-useful comments in code 2001/04/09 dam's * tinyfirewall.pm: corrected * standalone.pm: install function now returns the return value of the system. * netconnect.pm: corrected buggy cable removed buggy modem screen repetition 2001/04/09 Franois Pons * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes applied). fixed cancel support. added conditional restart of gpm on mouse configuration change. * fs.pm: removed notail option for reiserfs. * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in DrakConf only). * install_any.pm: added missing package to copy. * rescue/tree/etc/oem: fixes of grub installation using hd.img fix the fix for loopback mounting of hd.img. fixed hd.img access right. make kernel22 installed for every oem install... moved some package to closure instead of installed. added some missing packages. added nolock option for nfsmount. added missing package to copy. 2001/04/09 Guillaume Cottenceau * mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton * mdk-stage1/Makefile: 8.0beta -> 8.0rc * standalone/drakgw: fix for when there is an already existing rc.firewall complies with old format of drakgw so that upgrades will work * rescue/tree/etc/oem: fix english thanks to Kevin 2001/04/09 Pablo Saratxaga * any.pm: changed ISO_8859-1 TO ISO-8859-1 2001/04/09 Pixel * c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings, use it for kdm message * interactive.pm (ask_from_treelistf): make it behaves correctly when "cancel" is clicked * Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel (especially for abnt2 (br)) * install2.pm (main): sets umask (seems like default one is no more 022, kernel change?) (main): log the umask * devices.pm (entry): add hd[ijkl]* * bootloader.pm (install_lilo): better handling of map-drive (there's not always only 2 disks!) * lang.pm (load_po): sets $lang::charset to the charset used in the po 2001/04/09 siegel * share/po/de.po: fixes 2001/04/09 yduret * standalone/drakboot: added lilo/grub * bootlook.pm: added lilo/grub mode 2001/04/09 dam's * modules.pm: removed use install_any * tinyfirewall.pm: corrected * netconnect.pm: corrected buggy cable removed buggy modem screen repetition corrected bad bug when creating new profile * standalone.pm: install function now returns the return value of the system. * Makefile: removed install_any 2001/04/09 Franois Pons * standalone/mousedrake: fixed mousedrake (with interactive.pm fixes applied). fixed cancel support. added conditional restart of gpm on mouse configuration change. * rescue/tree/etc/oem: fixed hd.img access right. make kernel22 installed for every oem install... moved some package to closure instead of installed. added some missing packages. added nolock option for nfsmount. added missing package to copy. * fs.pm: removed notail option for reiserfs. * standalone/keyboarddrake: fixed exit on cancel (should cause trouble in DrakConf only). * printer.pm: added Till patch for printer (raw queue and PostScript queue). * install_any.pm: added missing package to copy. 2001/04/09 kjx * share/po/zh_CN.GB2312.po: translate before 8.0 release 2001/04/09 Pixel * install2.pm (main): log the umask * interactive.pm (ask_from_treelistf): make it behaves correctly when "cancel" is clicked * devices.pm (entry): add hd[ijkl]* * bootloader.pm (install_lilo): better handling of map-drive (there's not always only 2 disks!) 2001/04/09 yduret * bootlook.pm: fix, added lilo/grub frame fixed till bug 2001/04/08 dam's * rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get rid of kisdn * tinyfirewall.pm: updated added package installation * netconnect.pm: get rid of kisdn updated no more askwarn in wizard mode updated * standalone/tinyfirewall, standalone/drakgw, my_gtk.pm, netconnect_consts.pm: updated * standalone/net_monitor: removed Data::Dumper typo * standalone/draknet: updated typo corrected bad isdn field 2001/04/08 daouda * share/rpmsrate: increase quanta weight . 2001/04/08 fabman * share/po/es.po: updated spanish .po files 2001/04/08 Guillaume Cottenceau * modules.pm: correct my mistakes on removing some modules from stage1 and stage2 (-> remove only from stage1) 2001/04/08 Pablo Saratxaga * share/compssUsers.desktop, standalone/draknet: Fixed some english typos * standalone/net_monitor, netconnect.pm: Some English changes * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Fixed some english typos Updated pot file and various po files 2001/04/08 Pixel * fs.pm (write): remove debugging info :-( * bootloader.pm (suggest): add option "quiet" to the kernel in fb (requested by chmou) * install_steps.pm (afterInstallPackages): remove setting of kde charset in kdeglobals (kde is a grown-up now) 2001/04/08 siegel * share/po/de.po: new german version updates 2001/04/07 dam's * netconnect.pm: typo typo net_monitor incorporation * standalone/net_monitor, Makefile.config: net_monitor incorporation 2001/04/07 Pablo Saratxaga * share/po/hr.po: updated Croatian files * share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot, share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and Walloon files 2001/04/07 warly * share/compssUsers: PCL-CVS release v2_9_9 Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker Working directory: /home/warly/local/share/mdk/gi/perl-install/share/ In directory .: Modified compssUsers In directory po: patched Up-To-Date po/DrakX.pot patched Up-To-Date po/ca.po patched Up-To-Date po/de.po patched Up-To-Date po/hr.po patched Up-To-Date po/id.po patched Up-To-Date po/it.po patched Up-To-Date po/ja.po patched Up-To-Date po/ko.po patched Up-To-Date po/sp.po patched Up-To-Date po/sr.po patched Up-To-Date po/vi.po patched Up-To-Date po/wa.po --------------------- End --------------------- -- last cmd: cvs -f update -d -P -- * share/rpmsrate: PCL-CVS release v2_9_9 Repository : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker Working directory: /home/warly/local/share/mdk/gi/perl-install/share/ In directory .: Modified rpmsrate --------------------- End --------------------- -- last cmd: cvs -f update -d -P -- 2001/04/06 Franois Pons * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff. 2001/04/06 Guillaume Cottenceau * modules.pm: use jeff's suggestions to remove some old stuff Sun Happy Meal only for Sparc * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c: - do not print warning when we are in AUTOMATIC and insmod failed because of file-not-found in mar file (raid cards, etc) - print "please include msg from Alt-F3" for this warning message to ease further support - print pci entry of cards found in te logs * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh 2001/04/06 Pablo Saratxaga * share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files * share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files 2001/04/06 siegel * share/po/de.po: updates 2001/04/06 yduret * standalone/drakgw: swap cancel/configure button 2001/04/06 dam's * standalone/draknet2: dead code * standalone/net_monitor: updated * netconnect.pm: be quiet 2001/04/06 Franois Pons * rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff. fixed if label does not exists and grub refuse to read. * install_steps_interactive.pm: fixed typo for cups checking of installation. fixed "No printer" after configuring cups for remove server. added log for CD medium chosen par user. * pkgs.pm: added killing on child process of transaction that have been detached (typically with pid > transaction_pid and parent is 1). 2001/04/06 Guillaume Cottenceau * standalone/drakgw: - correct yvounetification in i18n stuff - remove some remaining debugging printings - add a bit more of explanations when starting drakgw in wizard mode * modules.pm: re integrate some TR net cards * mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c: - do not print warning when we are in AUTOMATIC and insmod failed because of file-not-found in mar file (raid cards, etc) - print "please include msg from Alt-F3" for this warning message to ease further support - print pci entry of cards found in te logs 2001/04/06 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Thai file Updated pot file 2001/04/06 yduret * standalone/drakgw: swap cancel/configure button 2001/04/06 dam's * my_gtk.pm: addde tk like routines * netconnect.pm: be quiet correctedInternetAccessTye and ADSLType * Makefile: iCorrected missing file install_any.pm. pixel sux. * standalone/draknet2: dead code * standalone/net_monitor: updated updated updated updated updated added * pixmaps/net_d.png, pixmaps/net_c.png: added * share/logo-mandrake.png: new icon 2001/04/06 Franois Pons * rescue/tree/etc/oem: fixed if label does not exists and grub refuse to read. * install_steps_interactive.pm: fixed typo for cups checking of installation. fixed "No printer" after configuring cups for remove server. added log for CD medium chosen par user. * pkgs.pm: added killing on child process of transaction that have been detached (typically with pid > transaction_pid and parent is 1). 2001/04/06 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Thai file Updated pot file 2001/04/06 Pixel * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove every modules.cz except the biggest one * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab and use it * install_any.pm: add write_fstab create install_any::write_fstab and use it 2001/04/06 yduret * bootlook.pm: minor fix * standalone/drakgw: recoded a embedded && gtk mode 2001/04/05 Pixel * lang.pm (fs_options): created (gets codepage and iocharset) * common.pm (if_): better logging of the error 2001/04/06 Pixel * tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove every modules.cz except the biggest one * install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab and use it * install_any.pm: add write_fstab create install_any::write_fstab and use it 2001/04/05 Pixel * standalone/drakboot: - fix getting result of fsedit::hds - cleanup * lang.pm (fs_options): created (gets codepage and iocharset) * common.pm (if_): better logging of the error (getVarsFromSh): fix for AA="" inspired by chmou the Great (but the Great what?) * bootloader.pm (install_grub): small fix (install_lilo): fix lilo's dumbness (when lilo warns about not the first drive, it usually fails) * diskdrake.pm (More): created, asks for supermount, rescue pt, reload. * install_steps_interactive.pm (addUser): default autologin to first user in beginner 2001/04/05 Pixel * any.pm (autologin): fix ask for autologin * install_steps_interactive.pm: ask for autologin (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img was used. Better have a look at /proc/cmdline * bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about not the first drive, it usually fails) * pkgs.pm, share/rpmsrate: - s/PCI/HW/ - add rio500 * install_any.pm (kernelVersion): fix enormous stupid typo * common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great (but the Great what?) * install_steps.pm (exitInstall): oups, report_bug is no more in commands:: * diskdrake.pm (More): created, asks for supermount, rescue pt, reload. 2001/04/05 Pixel * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show automatically selected packages' to go along with the new description * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'') * install_any.pm (kernelVersion): fix enormous stupid typo - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it * install_steps.pm (exitInstall): oups, report_bug is no more in commands:: (configureXBefore): fix the xkb verification (was broken for things like ``de(nodeadkeys)'') - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it * any.pm: ask for autologin * fs.pm (format_reiserfs): quietly format reiserfs * commands.pm: - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it * install_steps_interactive.pm: ask for autologin (generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img was used. Better have a look at /proc/cmdline - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it * share/rpmsrate: - add ldetect - the default Aurora chose is the categorizing one 2001/04/05 siegel * share/po/de.po: fixed typo 2001/04/05 yduret * bootlook.pm: fix pablo mess install autolgin just if we want to autolog :) 2001/04/05 dam's * ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure vs msec. * my_gtk.pm: added gtksize 2001/04/05 fcrozat * share/rpmsrate: No longer propose nautilus-mozilla (required by nautilus) propose nautilus-trilobite (for Eazel services) 2001/04/05 Pixel * install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show automatically selected packages' to go along with the new description * commands.pm, install_steps_interactive.pm, install_any.pm: - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it * fs.pm (format_reiserfs): quietly format reiserfs * Xconfigurator.pm (write_XF86Config): try to have $_ interpreted (otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'') * share/rpmsrate: - add ldetect - the default Aurora chose is the categorizing one * install_steps.pm (configureXBefore): fix the xkb verification (was broken for things like ``de(nodeadkeys)'') - move report_bug in install_any - g_auto_install generates the auto_inst.cfg string without output'ing it 2001/04/05 siegel * share/po/de.po: fixed typo 2001/04/05 yduret * bootlook.pm: fix pablo mess install autolgin just if we want to autolog :) 2001/04/04 Frederic Lepied * share/rpmsrate: added SCANNER and PHOTO groups 2001/04/04 Franois Pons * printerdrake.pm: make sure to insmod parport_probe alone as it is not available in 2.4 kernel and this this not a problem (silent error). added complete callback to check queue name under cups does contains only letters, numerics or underscore. * install_steps_interactive.pm: fixed printer description in summary. * install2.pm: added selectPackagesToUpgrade the first time choosePackages is called. * Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure to remove 32 bits depth for such card. * detect_devices.pm: fixed parport probe for printer under 2.4 kernel. * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption some times. * printer.pm: added die on error of lpadmin. * install_any.pm: fixed multiple wait message (looking+finding packages) 2001/04/04 Pablo Saratxaga * share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files 2001/04/04 Pixel * modules.pm (tv): add ultracam & usbvideo (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so skip them (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so skip them * install_any.pm (kernelVersion): cleanup 2001/04/04 Stew Benedict * install_any.pm: kernelVersion mods for PPC 2001/04/04 daouda * share/rpmsrate: add gatos for ati tv card . 2001/04/04 Frederic Lepied * share/rpmsrate: added SCANNER and PHOTO groups 2001/04/04 Franois Pons * live_install: unset locale environment for safety * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg (needed for live upgrade so that error message are not printed) * diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption some times. * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share * install2.pm: added selectPackagesToUpgrade the first time choosePackages is called. * install_any.pm: fixed multiple wait message (looking+finding packages) 2001/04/04 Pixel * install_any.pm (setPackages): better handling for tv, photo and scanner * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so skip them - add photo, tv and scanner - add pegasus and kaweth modules 2001/04/04 dam's * netconnect.pm: typo 2001/04/04 daouda * share/rpmsrate: add gatos for ati tv card . reput klyx but in lower weight (2) removed klyx from rpmsrate (bad idea according to pixel ) add klyx in install "Office KDE" 2001/04/04 Franois Pons * live_install: unset locale environment for safety * detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg (needed for live upgrade so that error message are not printed) * install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share * any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share * install2.pm: added selectPackagesToUpgrade the first time choosePackages is called. * install_steps.pm: disable frame buffer for Matrox cards. * install_any.pm: fixed multiple wait message (looking+finding packages) 2001/04/04 Pixel * install_any.pm (setPackages): better handling for tv, photo and scanner * modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so skip them - add photo, tv and scanner - add pegasus and kaweth modules * share/compssUsers: remove TV (it is a hardware flag) 2001/04/03 Franois Pons * install_any.pm: keep mount point configuration trhough multi-passes of diskdrake and others. * Xconfigurator.pm: prefer XF3 for SiS card. 2001/04/03 Pablo Saratxaga * share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file 2001/04/03 Pixel * diskdrake.pm: do not use isSpecial which should only be used on partitions (main): do not have loopback pseudo hd in hds out of diskdrake * modules.pm (load_raw): add the require install_any * share/rpmsrate: restore Aurora (i really don't understand what i've done with flag AURORA a month ago) to a simple behaviour * install_steps_interactive.pm (choosePackages): do not make a special case for upgrades (was: select the min size, which was on contradiction with profile selection) * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2 * standalone/mousedrake: fix horrible error (using an undefined $o) * share/list: add back mkreiserfs * standalone/XFdrake: don't start xfs if skiptest * fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains only true hard drives (not pseudo one like raid, loopback and lvm) * bootloader.pm (suggest): trap strange error. Should not really fix the pb * install_steps.pm (setupBootloaderBefore): nicer Aurora presence detetection * lang.pm (charset): fix for chineese which have charset in the name * Makefile: no more special case for mkreiserfs (can be done via -v 1) * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic dependencies" * install_any.pm (setPackages): don't preselect profiles in upgrade (setPackages): handle Flag: (setPackages): install kernel22 if install kernel is a 2.2 * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong (didn't propose to format it) protect the loading of module lvm-mod 2001/04/03 Stew Benedict * install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button emulation 2001/04/03 dam's * netconnect.pm: a lot of bugfixs corrected bad flag test corrected bad priority * standalone/draknet: typo bug fixes removed debugging messages and Data::Dumper corrected bad flag test 2001/04/03 Pablo Saratxaga * share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file 2001/04/03 Pixel * modules.pm (load_raw): add the require install_any * share/rpmsrate: restore Aurora (i really don't understand what i've done with flag AURORA a month ago) to a simple behaviour * lang.pm (charset): fix for chineese which have charset in the name * install_steps.pm (setupBootloaderBefore): nicer Aurora presence detetection * Makefile: no more special case for mkreiserfs (can be done via -v 1) * install_steps_interactive.pm (choosePackages): do not make a special case for upgrades (was: select the min size, which was on contradiction with profile selection) * fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2 * install_steps_gtk.pm (choosePackagesTree): better name than "Automatic dependencies" * install_any.pm (setPackages): don't preselect profiles in upgrade (setPackages): handle Flag: (setPackages): install kernel22 if install kernel is a 2.2 * share/list: add back mkreiserfs * standalone/XFdrake: don't start xfs if skiptest * lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong (didn't propose to format it) protect the loading of module lvm-mod 2001/04/02 dam's * modules.pm: corrected petite's mistake * netconnect.pm: protecting against non existent files 2001/04/02 Guillaume Cottenceau * mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix comply to all.kernels policy * tools/make_mdkinst_stage2: fix remove of alternate cz modules 2001/04/02 Pablo Saratxaga * share/po/cs.po: Updated Czech file * lang.pm: codepage option to mount requires only numeric values, eg "437" and not "cp437" Changed accordingly in the lists * share/rpmsrate: Install latin2 Postscript fonts for latin2 locales, install fonts-ttf-thai for Thai locale 2001/04/02 Pixel * c/Makefile: small cleanup for pcmcia_probe.c * tools/Makefile (install): s/-r/-rf/ * install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/ (setPackages): install imwheel if nbuttons > 3 * c/Makefile.PL: small cleanup for pcmcia_probe.c don't use pcmcia_probe.o from stage1, better compile it here, otherwise perl-install require mdk-stage1 to do compiled => circular dependency * Makefile: ignore dams or at least dams errors * c/.cvsignore: add pcmcia_probe.c 2001/04/02 Guillaume Cottenceau * rescue/make_rescue_img: fix pixelization (aka take advantage of all.kernels/.main) 2001/04/02 Pixel * tools/Makefile (install): s/-r/-rf/ 2001/03/30 Pixel * tools/Makefile (install): fix the globbing for packdrake.pm and rpmtools.pm 2001/03/29 Guillaume Cottenceau * rescue/drvinst: test for "Card:" and not install, some videoboards are not reported as DISPLAY_VGA :-( * tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img, mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more than one boot kernel :-) * rescue/list.i386: add reiserfsck 2001/03/29 dam's * tinyfirewall.pm: bad message at the end if kernel2.4 * netconnect.pm: added missing Device in Ethx when saving/loading * standalone/draknet: translation 2001/03/28 dam's * standalone/tinyfirewall: typo * interactive_gtk.pm: corrected pixel shit if embedded * standalone/draksec: embedded mode * standalone/draknet: corrected gtkpng in gtkwpm added translation * bootlook.pm: cute button box * tinyfirewall.pm: workaround to make it work if kernel 2.4 2001/03/28 fcrozat * share/rpmsrate: gmc is back in standard GNOME install, for people with existing home 2001/03/28 Franois Pons * standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for standalone XFdrake and mousedrake (multi-mouse and correct probe (USB)). * Xconfig.pm: re-fix mouse fix. fixed wrong mouse probe. fixed for standalone XFdrake and mousedrake (multi-mouse and correct probe (USB)). * Xconfigurator.pm: restore multi mouse support for XF3. 2001/03/28 Pablo Saratxaga * share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish, Finnish, Croatian and Turkish files * share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files * share/po/az.po: Updated Azeri and Danish files * share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish files Updated Finnish, Korean and Slovak files * share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish files Updated Azeri and Danish files 2001/03/28 Pixel * install_steps.pm: add fstab in the log * interactive_gtk.pm: better default_size setting * commands.pm: fix typo add fstab in the log * install_gtk.pm (test_mouse): ensure the test mouse is not too big 2001/03/28 warly * share/rpmsrate: add some commercial apps 2001/03/27 dam's * bootlook.pm: added kill USR2 before main * share/help.png: changed help button * share/help.xpm: changed help * tinyfirewall.pm: workaround to make it xork. 2001/03/27 Franois Pons * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image. * Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported currently. 2001/03/27 Guillaume Cottenceau * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers 2001/03/27 Pablo Saratxaga * share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po, share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po, share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese, Indonesian, Japanese, Korean and Walloon files changed i18n_compssUsers to make "path" i18n'able 2001/03/27 Pixel * install_any.pm: warnAboutNaughtyServers (setPackages): default profiles selection to GNOME, KDE, CONFIG * install_steps_interactive.pm: warnAboutNaughtyServers (summary): fix displaying of printer configured * pkgs.pm: warnAboutNaughtyServers * install_steps_gtk.pm (installPackages): catch the no png file exception (in case warly is dumb again) * my_gtk.pm: try to fix displaying in draksec (create_box_with_title): save the box_size in field "box_size" * install2.pm, any.pm: remove use of Bastille. get back to the good state we had :) * interactive_gtk.pm: try to fix displaying in draksec * share/rpmsrate: move back Bastille-Curses-module to CONFIG - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is LOCALES"zh" - raise WindowMaker - add xfce - am-utils is a server - raise some stuff in CONFIG to have stuff there - remove drakxtools from CONFIG (DrakConf requires drakxtools) - DrakConf from 5 to 4 * lang.pm (langsLANGUAGE): give the list of languages 2001/03/27 Stew Benedict * install_steps_interactive.pm: change verbage on bootloader warning 2001/03/27 siegel * share/po/de.po: minor typo-fixes 2001/03/27 dam's * share/help.png: changed help button * share/help.xpm: changed help 2001/03/27 Franois Pons * install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now postponed at end of install and only if rpm-4.0 or above has been installed. * mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image. * Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added support for two mice (laptop). The second mice is generally PS/2 as probe can says it is present. 2001/03/27 Guillaume Cottenceau * mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers 2001/03/27 Pixel * any.pm, install2.pm: remove use of Bastille. get back to the good state we had :) * install_any.pm: warnAboutNaughtyServers (setPackages): default profiles selection to GNOME, KDE, CONFIG * share/rpmsrate: move back Bastille-Curses-module to CONFIG - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is LOCALES"zh" - raise WindowMaker - add xfce - am-utils is a server - raise some stuff in CONFIG to have stuff there - remove drakxtools from CONFIG (DrakConf requires drakxtools) - DrakConf from 5 to 4 * install_steps_interactive.pm: warnAboutNaughtyServers (summary): fix displaying of printer configured * lang.pm (langsLANGUAGE): give the list of languages * pkgs.pm: warnAboutNaughtyServers * install_steps_gtk.pm (installPackages): catch the no png file exception (in case warly is dumb again) 2001/03/27 siegel * share/po/i18n_compssUsers: i18n group names * share/po/de.po: minor typo-fixes new german version 2001/03/26 daouda * share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate) 2001/03/26 fcrozat * share/rpmsrate: Install xscreensaver when installing GNOME 2001/03/26 Guillaume Cottenceau * standalone/drakgw: first attempt at pixelization of code (till's cups patches) 2001/03/26 Pablo Saratxaga * share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon files * share/po/vi.po: Updated Croatian, vietnamese and Walloon files Updated Portuguese, Swedish and Thai files * share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po, share/po/sv.po: Updated Portuguese, Swedish and Thai files 2001/03/25 Pixel * http.pm (getFile): verify the return value of the server. If not 200 (aka Ok), return undef * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp and libqtcups2 for kups in pkg_install_if_requires_satisfied 2001/03/25 siegel * share/po/de.po: new german version 2001/03/25 fabman * share/po/es.po: updated spanish .po file 2001/03/25 Pablo Saratxaga * share/po/ko.po: Updated Korean file * share/po/sv.po: Updated Swedish file 2001/03/25 Pixel * http.pm (getFile): verify the return value of the server. If not 200 (aka Ok), return undef * install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp and libqtcups2 for kups in pkg_install_if_requires_satisfied * any.pm (ask_users): fix dead-loop * bootloader.pm (suggest): add entry for nt 2001/03/25 siegel * share/po/de.po: new german version 2001/03/24 Pablo Saratxaga * share/po/vi.po: Updated Vietnamese file 2001/03/24 Pixel * mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which is unneeded (and "member" of merge2pcitable was clashing) * any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user is given. * install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users * install_any.pm (disable_user_view): created, takes care of gdm too (taken from msec) * mouse.pm (detect): fix francois... uh, no too hard. easier to fix francois's bugs ;pp * timezone.pm (%l2t): fix for fuzzyChoice * share/keyboards.tar.bz2: - readding with -kb - fixing permissions on xmodmap.kr remove before adding again with -kb * modules.pm: have natsemi in network.img 2001/03/24 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Azeri file 2001/03/24 Pixel * mouse.pm (detect): fix francois... uh, no too hard. easier to fix francois's bugs ;pp * timezone.pm (%l2t): fix for fuzzyChoice * modules.pm: - add missing modules (now in sync with pcitable) - add 'media' class - cleanup 2001/03/24 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Azeri file 2001/03/24 Pixel * install_any.pm (copy_advertising): fix escaping $f causing perl to segfault :-( (copy_advertising): handle i18n'ed advertising * pkgs.pm: cleanup * modules.pm: - add missing modules (now in sync with pcitable) - add 'media' class - cleanup 2001/03/24 dam's * tinyfirewall.pm: corrected bad exited. reincorporated some ugly code, need fixing 2001/03/24 Pixel * install_any.pm (copy_advertising): handle i18n'ed advertising * modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel 2.4 2001/03/23 Franois Pons * Xconfigurator.pm: fixed screen id for Device to be present whenever the same BusID is used. added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. * printerdrake.pm: Do not ask to configure a printer if standalone, previously only for embended. * Xconfig.pm: fixed typo for wacom. added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. 2001/03/23 Pixel * interactive.pm (ask_from_listf_no_check): fix the fix fix fix (ask_from_listf_no_check): fix the fix fix * common.pm (formatError): created * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in DHCP/BOOTP * diskdrake.pm (try): format the error (no more "at line ...") (Add2LVM): "new" was not i18n'ed * install_steps_interactive.pm (exitInstall): no "cancel" button * partition_table.pm: add Empty to bad_types * fsedit.pm (change_type): When changing a partition type from ext2fs to Linux RAID (or LVM), the mount point should be removed. 2001/03/23 siegel * share/po/de.po: new german version 2001/03/23 dam's * tinyfirewall.pm: corrected bad translation correctedd typo updated code cleaning tinyfirewall now works. * Makefile.config: added tinyfirewall * any.pm, mouse.pm: added /dev/modem in modem list selection * standalone/drakxconf: added tinyfirewall entry * standalone/tinyfirewall: added update code updated wrapper to launch tinyfirewall in embedded mode * netconnect.pm: added /dev/modem in modem list selection netconnect doesn't write the file 1 2001/03/23 fcrozat * share/rpmsrate: nautilus-mozilla and xalf are installed by default in GNOME gmc is not installed by default in GNOME gabber gaim are moved to instant messaging gcombust in moved to GNOME CD burner gtm is installed by GNOME/File transfer mozilla is installed by default as www browser galeon is installed by default as www browser for GNOME 2001/03/23 Franois Pons * tools/syncrpms: added size-stamp test to copy identical file in version, release. * Xconfig.pm: fixed typo for wacom. added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. * Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. fixed wrong usage of Screen keyword in Device section, should be present and reseted for any multi head card with only one BusID. * mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added multiple tablet support (wacom), moved usb probe for mouse and tablet at the beginning. 2001/03/23 Pablo Saratxaga * share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file Updated Finnish file * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Added Vietnamese file 2001/03/23 Pixel * any.pm: ifix the dams stuff * install_steps_interactive.pm (exitInstall): no "cancel" button * share/po/i18n_compssUsers: fix for better compliance with po format * netconnect.pm: ifix the dams stuff cleanup and enable gzip'ed isdn.db * Makefile: gzip ldetect-lst files * modules.pm: add i810_audio (still need a script to add missing one and keep in sync) * bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives * interactive.pm (ask_from_listf_no_check): fix the fix fix fix (ask_from_listf_no_check): fix the fix fix (ask_from_listf_no_check): fix the bad fix * common.pm (formatError): created (openFileMaybeCompressed, catMaybeCompressed): added (getVarsFromSh): take care of comments * network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in DHCP/BOOTP * partition_table.pm: add Empty to bad_types * mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug) * fsedit.pm (change_type): When changing a partition type from ext2fs to Linux RAID (or LVM), the mount point should be removed. * detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale (isFloppyOrHD): floppy type is 'fd', not 'floppy' (stringlist): nicer (a la new lspcidrake) * Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and MonitorsDB * diskdrake.pm (try): format the error (no more "at line ...") (Add2LVM): "new" was not i18n'ed 2001/03/23 Stew Benedict * mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC, use vmlinux for PPC prepend of_dev to initrd stanza in yaboot.conf add 1-button mouse for PPC 2001/03/23 siegel * share/po/de.po: new german version 2001/03/22 Chmouel Boudjnah * tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139: Add 8139 grub stage. 2001/03/22 dam's * bootlook.pm: corrected mapn * standalone/draknet: removed use Data::Dumper * netconnect.pm: removed mail informat oin comment update * tinyfirewall.pm: removed use Data::Dumper working on tinyfirewall 2001/03/22 fabman * share/po/es.po: changed "swap" for "intercambio" in the spanish .po files updated DrakX, menudrake and urpmi es.po files 2001/03/22 Franois Pons * Xconfigurator.pm: fixed wrong access to undefined value promoted to empty array reference. 2001/03/22 Guillaume Cottenceau * mdk-stage1/probing.c, mdk-stage1/tools.h: - fix detection of more than 3 scsi attached devices - cleaner code for cmp of ptr against static strings 2001/03/22 Pixel * standalone/mousedrake: remove test ugliness of dams * c/Makefile.PL: no pcmcia_probe in drakxtools * modules.pm (load_thiskind): indent as it should be * install_steps_interactive.pm (generateAutoInstFloppy): fix the message which was uptodate only for sparc :-( * Xconfigurator.pm: no need for "use Data::Dumper;" 2001/03/22 Stew Benedict * modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should have been mace 2001/03/22 yduret * bootlook.pm: mapn works tx dams nmap added mapn fun to reduce code.. testing it added install of rpm xpm png files * pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm, pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm, pixmaps/verti.xpm: convert xpm to png 2001/03/21 dam's * standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool * netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug 2001/03/21 Franois Pons * detect_devices.pm: added pci id reference. * c/stuff.xs.pm: added support for pci id extraction. * Xconfigurator.pm: fixed wrong XFree4 version reference. fixed null string in monitor identifier. added multi-head support in XFdrake. 2001/03/21 Guillaume Cottenceau * standalone/drakgw: honour embedded mode * share/compssUsers: move NETWORKING_FILE (contains stuff for nfs mounting..) from Internet Station to Network Computer 2001/03/21 Pablo Saratxaga * share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Croatian and Serbian files * share/po/sp.po, share/po/sr.po: Updated Serbian files Updated Croatian and Serbian files * share/po/az.po: Updated Azeri file Updated Croatian and Serbian files * share/po/sk.po: Updated Azeri and Slovak files Updated Croatian and Serbian files * lang.pm: Added fields to charsets table holding info for mount (iocharset and codepage mount options) 2001/03/21 Pixel * install_any.pm (g_default_packages): nice warning if mount in vfat fails * share/rpmsrate: move webmin to CONFIG remove ipchains and iptables, raise gfcc * docs/README: add cvs howto * install_steps_interactive.pm (summary): fix * detect_devices.pm: old code * bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo doesn't like them (add_kernel): cleanup (suggest): make it work with kernel22-secure and no kernel22 * modules.pm (when_load): move the alias sound to when_load, don't check ppc as it could be used for non-ppc (load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for every load_thiskind, not only scsi one * c/stuff.xs.pm (from_utf8): as pablo said... 2001/03/21 siegel * share/po/de.po: new german version new german version 2001/03/20 Pixel * modules.pm (@drivers_by_category): if_ization (load_thiskind): cleanup 2001/03/21 Pixel * bootloader.pm (add_kernel): cleanup (suggest): make it work with kernel22-secure and no kernel22 * share/rpmsrate: remove ipchains and iptables, raise gfcc 2001/03/20 dam's * interactive.pm: no wizard if warning 2001/03/20 Pixel * install_steps_interactive.pm: fix pcmcia functions only on x86 - create install_any::unselectMostPackages - use it instead of pkgs::unselectAllPackages (otherwise default_packages ends up non-selected) * modules.pm (@drivers_by_category): if_ization (load_thiskind): cleanup * any.pm, install2.pm, share/rpmsrate: use bastille backend * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86 * install_steps.pm, install_any.pm: - create install_any::unselectMostPackages - use it instead of pkgs::unselectAllPackages (otherwise default_packages ends up non-selected) 2001/03/20 Stew Benedict * modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add routine for - PPC any.pm: double "Append" entry in expert mode for yaboot.conf - PPC install_steps_interactive: setup dmasound - PPC modules.pm: load Mac hardware modules - PPC 2001/03/20 dam's * netconnect.pm: corrected bug in reading resolv.conf, and changed chmod for net_cnx_* * interactive.pm: no wizard if warning * standalone/draknet: added update after {dis}connecting 2001/03/20 Guillaume Cottenceau * diskdrake.pm: fix formatting of raid 2001/03/20 Pixel * share/rpmsrate: use bastille backend - add nautilus * install_steps_interactive.pm: fix pcmcia functions only on x86 - create install_any::unselectMostPackages - use it instead of pkgs::unselectAllPackages (otherwise default_packages ends up non-selected) (setupSCSI): don't pcmcia_probe if testing - tellAboutProprietaryModules moved to setupSCSI - miscellaneous step re-enabled, called Security - pcmcia_probe moved to setupSCSI, skipped in noauto * any.pm: use bastille backend * install2.pm: use bastille backend - tellAboutProprietaryModules moved to setupSCSI - miscellaneous step re-enabled, called Security - pcmcia_probe moved to setupSCSI, skipped in noauto have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the parameter any more) * netconnect.pm (modem_detect_backend): cleanup * c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86 have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the parameter any more) * Makefile: install cardmgr * install_any.pm: - create install_any::unselectMostPackages - use it instead of pkgs::unselectAllPackages (otherwise default_packages ends up non-selected) (setPackages): install usbd in case of usb * install_steps.pm: - create install_any::unselectMostPackages - use it instead of pkgs::unselectAllPackages (otherwise default_packages ends up non-selected) 2001/03/20 Stew Benedict * any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC detect_devices.pm: forgot to remove commented code after test netconnect.pm: load macserial module for PPC 2001/03/20 dam's * standalone/draknet, netconnect.pm: improved connection windows, and loading / saving of /etc/sysconfig/network-scripot/netcnx* 2001/03/20 Pixel * share/rpmsrate: - add nautilus * install_any.pm (setPackages): install usbd in case of usb * Makefile: install cardmgr 2001/03/19 Guillaume Cottenceau * fsedit.pm: fix loopback appearing twice in format partition * diskdrake.pm: fix "loopback" name of loopback tab in diskdrake 2001/03/19 Pablo Saratxaga * share/po/ko.po: updated korean file Updated po files * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files 2001/03/19 Pixel * pkgs.pm (computeGroupSize): fix hacks, better hacks (saveCompssUsers): fix * install_steps_interactive.pm (chooseGroups): - make the computed size work - unselectAll when a profile is unselected * interactive_gtk.pm (ask_from_entries_refW): better sizing in case of scrolls 2001/03/19 Stew Benedict * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC 2001/03/19 dam's * standalone/draknet: corrected graphical layout for newbies * netconnect.pm: added net_cnx_{up, down} save 2001/03/19 Pablo Saratxaga * share/po/ko.po: updated korean file Updated po files * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files 2001/03/19 Pixel * pkgs.pm (computeGroupSize): fix hacks, better hacks (saveCompssUsers): fix * share/rpmsrate: - add rxvt-CJK - exchange xterm and rxvt - move bc from SCIENCES to SYSTEM * interactive_newt.pm (ask_from_entries_refW): - ensure the width is less than $width - 7 (in french and 80x25, the treelist was too big) - if term is very big, use 10 lines instead of 5 - if no button is asked, but one in any case otherwise it's buggy * install_steps_interactive.pm (chooseGroups): - make the computed size work - unselectAll when a profile is unselected * interactive.pm (ask_from_listf_no_check): fix fix (ask_from_listf_no_check): fix the filtering of exceptions 2001/03/19 Stew Benedict * mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC 2001/03/18 Guillaume Cottenceau * mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for hd-install when you provide a not valid ISO (cd #2 for example) * mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h, mdk-stage1/log.h: use some help with __attribute__ 2001/03/17 Guillaume Cottenceau * rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup * mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in editing ask_from_entries in stdio mode * mdk-stage1/pci-resource/Makefile: do not use marfiles for deps 2001/03/17 Pixel * lang.pm (write_langs): in case of empty %_install_langs, don't write it * install_steps.pm (pkg_install_if_requires_satisfied): better logging * share/rpmsrate: add gpm & evolution 2001/03/17 Guillaume Cottenceau * mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to work with dietlibc * mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET for testing purposes.. * mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new mkinitrd package release * mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in editing ask_from_entries in stdio mode 2001/03/17 Pablo Saratxaga * share/po/sv.po: updated Swedish file * share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese keyboard * keyboard.pm: Added choice of Korean keyboard 2001/03/17 Pixel * lang.pm (write_langs): in case of empty %_install_langs, don't write it * install_steps.pm (pkg_install_if_requires_satisfied): better logging * share/rpmsrate: add gpm & evolution 2001/03/16 Guillaume Cottenceau * mdk-stage1/pci-resource/Makefile: refine deps * mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile, mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper * mdk-stage1/insmod-busybox/insmod.c: force load 2001/03/16 Pixel * install_any.pm (setPackages): set flag "TV" when bttv hardware is there * share/compssUsers, share/rpmsrate: move out TV from VIDEO * diskdrake.pm (Type): fix the code verifying size >32 for reiserfs * modules.pm (write_conf): better logging * c/stuff.xs.pm: add from_utf8 * c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and description 2001/03/16 Stew Benedict * tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert, tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot - remove/re-add - did not use -kb switch - thx Pixel 2001/03/15 Franois Pons * Xconfigurator.pm: SiS card are no more prefered for XF3. added standalone support to prefer XF3 or XF4 to keep current used server version. * standalone/XFdrake: remove duplicate begin label. take care of existing configuration. 2001/03/15 Guillaume Cottenceau * modules.pm: skip dc395x_trm on stage1 dc395x_trm is back in 2.4 * share/compssUsers: try to enhance 2001/03/15 Pablo Saratxaga * share/po/az.po: updated Azeri file 2001/03/15 Pixel * Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says this is not needed anymore :) 2001/03/15 Stew Benedict * tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot, tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD, mkhybrid-1.12b5.4, yaboot: create PPC CD * install_steps_interactive.pm, detect_devices.pm, bootloader.pm: bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed temporary file read/write per Pixel * Xconfigurator.pm: force 1024x768 on Powerbook * tools/ppc/README: README: README for creating PPC boot CD 2001/03/14 dam's * netconnect.pm: changed label + profile before types.. 2001/03/14 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: corrected the script and updated po files 2001/03/14 Pixel * share/compssUsers: keep only one Development entry * install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation * bootlook.pm: fix for perl2fcalls * install_steps_interactive.pm (chooseGroups): disable the size display as it is wrong (for the beta2) 2001/03/14 Stew Benedict * install_steps_interactive.pm, install_steps_gtk.pm, partition_table_mac.pm, bootloader.pm: fix bootstrap partition creation/tracking allow Xpmac to launch in 2 modes based on cmdline 2001/03/14 siegel * share/po/de.po: new german version 2001/03/14 dam's * netconnect.pm: changed label + profile before types.. 2001/03/14 Franois Pons * pkgs.pm: fixed unselect management of choice, propagate unselection correctly to all packages requiring unselected package. * install_any.pm: use LD_LOADER when invoking parshedlist. 2001/03/14 Pablo Saratxaga * share/po/no.po, share/po/nl.po: updated Norwegian file * share/locales.tar.bz2, share/gconv.tar.bz2, share/list, share/fonts.tar.bz2: new fonts and locale files * share/po/ko.po: Fixed email of Korean translator updated Korean file * install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm: completed language list completed language->keyboard guessing list aesthetic changes to an English message (removed \n and let gtk+ do the formatting, it is nicer) * share/po/az.po: Updated Azeri file 2001/03/14 Pixel * pkgs.pm: fix the compssUsers interpretation (readCompssUsers): change the key of compssUsers, added "label" (computeGroupSize): fix bug (computeGroupSize): fix logging * share/gconv.tar.bz2: moved to share/list * bootlook.pm: fix for perl2fcalls * share/rpmsrate: CLIENT & SERVER is prohibited * timezone.pm: - add many timezones - defaults to GMT - verifier added * install_steps_gtk.pm: fix the compssUsers interpretation (choosePackagesTree): fix * common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return the number of matched words/characters * share/compssUsers: keep only one Development entry CLIENT & SERVER is prohibited * install_steps_interactive.pm (chooseGroups): disable the size display as it is wrong (for the beta2) (chooseGroups): add path for seperating groups, use "label" for the group text * Makefile: remove gconv 2001/03/13 siegel * share/po/de.po: Fixed typos. 2001/03/13 siegel * share/po/de.po: Fixed typos. 2001/03/13 dam's * share/help.png: changed 2001/03/13 Pixel * install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers for the tree * standalone/drakgw: pixelization * share/rpmsrate: HDF can't be at the beginning of the line or it will be taken as a flag moved icewm to SYSTEM with !KDE !GNOME * pkgs.pm: compss is deprecated. use compssUsers for the tree (readCompssUsers): get the "path" * install_steps.pm: compss is deprecated. use compssUsers for the tree renamef created and used * detect_devices.pm (burners): don't use cdroms() which return scdX for ide burners, and isBurner don't use the same technique. so use get() and grep for type "cdrom" * install_any.pm: compss is deprecated. use compssUsers for the tree (setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA renamef created and used * install_steps_interactive.pm: compss is deprecated. use compssUsers for the tree (chooseGroups): fix to get back the icons (chooseGroups): size computed should work * common.pm: renamef created and used 2001/03/13 siegel * share/po/de.po: new german translation 2001/03/13 warly * share/compssUsers: fix {W,w}orkstation remove ^Server and ^Development 2001/03/13 Pixel * standalone/drakgw: pixelization * install_steps_interactive.pm (chooseGroups): size computed should work * share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME * install_steps.pm, common.pm, install_any.pm: renamef created and used 2001/03/12 dam's * Makefile: removed wizard pixmap from install * pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated added pixmap for wizard * my_gtk.pm: new wizard layout, with pixmaps. added ugly workaround for ugly Hseparator * share/step-red.png, share/step-orange.png, share/step-orange-click.png, share/step-green-click.png, share/step-green.png, share/step-red-on.png, share/step-orange-on.png, share/step-green-on.png, share/step-green_s.png, share/step-red-click.png: removing bad png files... * share/help.png: new help button. blah * install_any.pm: typo * pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated * netconnect.pm: corrected askokcancel -> askyesorno * interactive.pm: corrected bad okcanel in wizard mode * install_steps_interactive.pm: added $::isInstall * share/logo-mandrake_trans.png: new logo for other themes * services.pm: removed use Data::Dumper corrected bug in display 2001/03/12 Franois Pons * modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm, live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should work for other combination but not tested. fixed locale usage and gtk environment interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX). created LD_LOADER environment variable to keep track of right ELF loader to be used for the GLIBC used by the live update. added internal PATH to LD_LIBRARY_PATH as ELF loader only check this one and not PATH. 2001/03/12 Guillaume Cottenceau * standalone/drakgw: - make it work as a wizard - make it work with iptables (kernel-2.4) * modules.pm: reflect Jeff Garzik's answers to my questions on kernel@ 2001/03/12 Pablo Saratxaga * share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po, share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque file 2001/03/12 Pixel * install_steps.pm (afterInstallPackages): save the compssUsers flattened for rpmdrake * install_steps_interactive.pm (summary): remove 'clicked' (labels are used) put everything in %compssUsers, use field flags for the flags :) * pkgs.pm (computeGroupSize): log what is found (saveCompssUsers): make it work (readCompssUsers): clean-up (saveCompssUsers): created put everything in %compssUsers, use field flags for the flags :) (computeGroupSize): created * share/rpmsrate: lower Zope (anyway Zope is not in main) * fsedit.pm (hds): search for existing lvm in @hds *and* @lvms * commands.pm (loadkeys): created * install_any.pm (setPackages): don't readCompssUsers with $o->{packages} (setPackages): kernel-secure doesn't exist anymore, use kernel22-secure. don't use kernel-secure as a kernel-smp. put everything in %compssUsers, use field flags for the flags :) (setPackages): set compssUsersChoice "3D" if 3D enabled graphic card * interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries add "label" type * share/compssUsers: change the path format * detect_devices.pm (get_mac_model): fix for perl2fcalls * interactive.pm: add "label" type 2001/03/12 warly * share/compssUsers: add some NETWORKING_* that were empty dispach some DEVELOPMENT and SERVER to more appropriate groups added path * share/rpmsrate: add some NETWORKING_* that were empty dispach some DEVELOPMENT and SERVER to more appropriate groups 2001/03/11 Guillaume Cottenceau * ftp.pm: do not retry on 550 file unavailable 2001/03/12 Pixel * install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled graphic card 2001/03/11 dam's * services.pm: no more restart button 2001/03/11 Guillaume Cottenceau * ftp.pm: do not retry on 550 file unavailable 2001/03/11 Pixel * install_steps_interactive.pm (summary): fix clicked empty handler * share/rpmsrate: - lower tftp-server - a lot of modifs (thanks to Prana) 2001/03/10 dam's * standalone/drakxservices: embedded mode * my_gtk.pm: added gtkset_border_width typo again typo added gtkmove added gtkset_modal and gtkappenditems * services.pm: fixed big bug. imajor improvement. improved. 2001/03/10 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Korean file 2001/03/09 dam's * standalone/drakxconf: added harddrake * my_gtk.pm: applied gtkradio created create_boxradio in wizard mode : list -> radio buttons added gtkradio * bootlook.pm: workaround for the graphical layout. * install_steps_gtk.pm: applied gtkradio created create_boxradio in wizard mode : list -> radio buttons * printerdrake.pm: if embedded -> no first question * interactive_gtk.pm: added tooltips to create_boxradio applied gtkradio created create_boxradio in wizard mode : list -> radio buttons 2001/03/09 Pixel * share/rpmsrate: a hell lot of modifications, mostly cleanup of DEVELOPEMENT 2001/03/09 Stew Benedict * Xconfigurator_consts.pm: keyboard mapping for PPC * detect_devices.pm: routine to detect MacIntosh model code 2001/03/09 dam's * my_gtk.pm: added gtkradio * standalone/draknet: changed graphical layout, expert mode 2001/03/09 Pixel * pkgs.pm (read_rpmsrate): handle the special case of packages requiring locales-*, adding the flag LOCALES"*" for them * install_steps_interactive.pm (choosePackages): moved the log to install2::choosePackages (to have it in auto_installs too) * install_any.pm (setPackages): set compssUsersChoice LOCALES"*" * install2.pm (choosePackages): log groups choosen * share/rpmsrate: a hell lot of modifications, mostly cleanup of DEVELOPEMENT - chineese packages - move Aurora's to AURORA (DrakX take care of Aurora) * install_steps_gtk.pm (remove_advertising): created 2001/03/08 Guillaume Cottenceau * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log 2001/03/08 Pixel * verify_c: fix the regexp * detect_devices.pm (floppies): load module "floppy" before probing 2001/03/08 dam's * netconnect.pm: applied if__ 2001/03/08 Guillaume Cottenceau * mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log 2001/03/08 Pixel * verify_c: fix the regexp * share/rpmsrate: add i18n'ed packages * detect_devices.pm (floppies): load module "floppy" before probing 2001/03/08 dam's * common.pm: added if__ * netconnect.pm: applied if__ 2001/03/08 Franois Pons * diskdrake.pm: avoid using e2fsck, else it abort by checking partition size (which differs). fix resize ext2 by using resize2fs. * pkgs.pm: changed choice of package for selection. * share/list: added resize2fs and dumpe2fs, removed ext2resize which is replaced. 2001/03/08 Guillaume Cottenceau * mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not honoured by kernel 2001/03/08 Pablo Saratxaga * share/po/no.po: updated Norwegian file 2001/03/08 Pixel * install_any.pm: advertising modifs (setPackages): use burners instead of IDEburners * bootloader.pm: cleanup * interactive.pm (ask_from_listf_no_check): catch wizcancel and return undef * fs.pm (write_fstab): change again for 'none' checking the mount point (write_fstab): special case for device ``none'' (which can be mounted twice or more :) * my_gtk.pm (_create_window): on delete_event, destroy the window and raise wizcancel * share/po/fr.po: fix bad translation * share/rpmsrate: add i18n'ed packages raise kdebase * install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs * detect_devices.pm: cleanup (isBurner): use syslog to detect scsi burners 2001/03/08 Stew Benedict * install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp * partition_table_mac.pm: fixed variable referencing - thx Pixel 2001/03/08 dam's * netconnect.pm: corrected bad pci number -> string 2001/03/08 Pablo Saratxaga * share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated Bulgarian, Catalan and Serbian files 2001/03/08 Pixel * bootloader.pm (dev2grub): better error reporting * tools/cvslog2changelog.pl (%users): add stew * install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix * share/rpmsrate: raise kdebase xcdroast is the best cd burner ui, raise it above others lower some EDITORS raise vim-X11 lower xrn, raise pan * install_any.pm (setPackages): use burners instead of IDEburners (setPackages): at least set BURNER for ide burners * any.pm: cleanup * install_steps_interactive.pm, install2.pm: re-add miscellaneous step, but always hidden (aka automatic) * detect_devices.pm (isBurner): use syslog to detect scsi burners * fs.pm (write_fstab): special case for device ``none'' (which can be mounted twice or more :) * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions (without mem=) 2001/03/08 dam's * netconnect.pm: corrected bad pci number -> string 2001/03/08 Pixel * tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions (without mem=) 2001/03/07 dam's * netconnect.pm: corrected default focus after detection don't test adsl if net install 2001/03/07 Pixel * modules.pm (add_alias): remove the alias block-major-11 as it's overriding the default alias to sr_mod, and is uneeded with scsi_hostadapter being added to /etc/modules.conf * share/rpmsrate: lower heartbeat 2001/03/07 sbenedict * help.pm: * perl-install/help.pm - typo in yaboot help * any.pm: * perl-install/any.pm - fixed two $l vs. @l references - bootloader menu, need image/boot in rec mode PPC CVl: ---------------------------------------------------------------------- * devices.pm: * perl-install/devices.pm - add adbmouse 2001/03/07 dam's * standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages 2001/03/07 Franois Pons * install_any.pm, bootloader.pm: fixed support for other kernel for bootloader entries. automatically add 2.2 entries for kernel22 (manage hack-kernel too). * Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card. * pkgs.pm: added support for killing all child process of a transaction, necessary to be able to umount cdrom and eject it correctly. 2001/03/07 Pixel * share/fonts.tar.bz2: use gb16fs instead of gb16st * modules.pm (add_alias): remove the alias block-major-11 as it's overriding the default alias to sr_mod, and is uneeded with scsi_hostadapter being added to /etc/modules.conf * share/rpmsrate: lower heartbeat lower Mesa's rate * install2.pm (main): save $@ in $err so that it's not modified before being used * share/locales.tar.bz2: remove ending '/' in symlinks not pleasing packdrake * standalone/drakboot: make it please perl2fcalls 2001/03/07 sbenedict * bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force XF4 for PPC in recommended mode * perl-install/bootloader.pm - rework get_of_dev to work in live install * install_steps_interactive.pm, any.pm, partition_table_mac.pm: * perl-install/any.pm - change in partition_table_mac'xxx syntax * perl-install/install_steps_interactive.pm - change in partition_table_mac'xxx syntax * perl-install/partition_table_mac.pm - change in partition_table_mac'xxx syntax 2001/03/07 Pablo Saratxaga * share/po/fr.po: Fixed French typos reported by tester 2001/03/07 Pixel * share/fonts.tar.bz2: use gb16fs instead of gb16st * fsedit.pm: fix typo * install2.pm (main): save $@ in $err so that it's not modified before being used * share/rpmsrate: lower Mesa's rate * standalone/drakboot: make it please perl2fcalls 2001/03/06 dam's * netconnect.pm: corrected bad %intf while savung don't ask configuration if expert now detecting adsl * standalone/draknet: remmoved 'quiting appli' screen 2001/03/06 Guillaume Cottenceau * install_any.pm: fix save of automatic stage1 info for static network * mdk-stage1/init.c: do not display from syslog msg's from RPM telling that it installed/removed some pkg's * mdk-stage1/Makefile: fix includes for init 2001/03/06 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese file 2001/03/06 Pixel * perl2fcalls: - small fix for bootlook.pm - don't display reused * detect_devices.pm (stringlist): if no text description, display ids * install_steps_interactive.pm (generateAutoInstFloppy): comment old code (summary): fixes (setupSCSI): cleanup (summary): display sound/tv/isdn cards found * fsedit.pm (check_mntpoint): don't allow LVM on / or /boot (@suggestions_mntpoints): add /boot * install_any.pm: hack to make perl2fcalls happy (getHds): fix for no hd detected in newbie installs (setPackages): s/snd-slot/sound-slot/ * install_steps_auto_install.pm (@graphical_steps): add beforeInstallPackages so that advertisings are there * install2.pm (setupSCSI): remove autoSCSI, cleanup * http.pm, ftp.pm: don't use install_any * modules.pm: add cciss * partition_table.pm (add): create 3 primaries before creating an extended if DAC960 (/dev/rd/*) (add): max number of parts for rd, ida and cciss 2001/03/06 yduret * bootlook.pm: pixelisation 2001/03/06 dam's * install2.pm: corrected bad file search corrected intf setting * standalone/draknet: added enable/disable networking button. * standalone/drakxconf: updated to be launched frome DrakConf if no DISPLAY * netconnect.pm: now detecting adsl typo better load_conf * Xconfigurator.pm: cleaned png displaying * common.pm: setinhash -> set_in_hash added setinhash * fs.pm: typo use set_in_hash 2001/03/06 Guillaume Cottenceau * mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic mode * mdk-stage1/Makefile: fix includes for init 2001/03/06 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese file updated Lithuanian file * help.pm, standalone/draknet: corrected some typos, Updated Japanese file 2001/03/06 Pixel * install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to any::runlevel * partition_table.pm (add): max number of parts for rd, ida and cciss * fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash * diskdrake.pm (Create): pixelization * fsedit.pm (hds): pixelization * install_steps_auto_install.pm (@graphical_steps): add beforeInstallPackages so that advertisings are there * modules.pm: add cciss * install2.pm (main): remove unloading vfat (not needed anymore with mdk-stage1) 2001/03/05 dam's * netconnect.pm: $mouse->{device} is set if it doesn't exists. * Makefile: added pixmaps copying 2001/03/05 Pablo Saratxaga * netconnect.pm, bootlook.pm, help.pm: fixed English typos 2001/03/05 Pixel * install_steps_interactive.pm (generateAutoInstFloppy): use generate_automatic_stage1_params * c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK * install_any.pm (generate_automatic_stage1_params): replace generate_ks_cfg 2001/03/05 dam's * Makefile: added pixmaps copying * standalone/draknet: required gtk only if needed, added redirection to newt if needed * netconnect.pm: $mouse->{device} is set if it doesn't exists. corrected short circuit if network install corrected bad end message, added copying of resolv.conf & modules.conf * install2.pm: moved askrootpasswd and adduser before network conf * network.pm: removed old NS0 fetching. /etc/resolv.conf is read in install2.pm now removed setdefaultroute and sethostname 2001/03/05 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated Latvian, Belarussian and Spanish files 2001/03/05 Pixel * lvm.pm (lv_create): fix typo * bootloader.pm: add use devices (install_grub): ensure the translated messages are not too big the hard way * install_any.pm (generate_automatic_stage1_params): replace generate_ks_cfg (install_urpmi): have "use hdlist ..." in any case * my_gtk.pm: XSetInputFocus now done in perl-GTK (_create_window): don't care about c::XSetInputFocus not existing * any.pm (setupBootloader): pixelization (setupBootloader): fix call to get_append * interactive.pm (vnew): cleanup * common.pm (salt): cleanup * install_steps_interactive.pm (generateAutoInstFloppy): use generate_automatic_stage1_params * c/stuff.xs.pm: XSetInputFocus now done in perl-GTK * c/Makefile.PL: compile fix * diskdrake.pm (create_buttons4partitions_): fix for displaying LVM * Xconfigurator.pm (xtest): use external xtest if standalone * install2.pm (main): remove unloading vfat (not needed anymore with mdk-stage1) 2001/03/04 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, diskdrake.pm, share/po/af.po: updated po files 2001/03/04 Pixel * diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work * share/rpmsrate: - remove autologin - move X11R6-contrib to DEVELOPEMENT and lower rate 2001/03/04 stew * any.pm - changes to enable yaboot configuration for PPC * diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap * install_steps_interactive.pm - auto-add Apple Bootstrap - PPC 2001/03/03 Pixel * install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake, install_interactive.pm, install2.pm: small fixes for LVM * diskdrake.pm: don't default the LVM name to 'pp' ;pp small fixes for LVM 2001/03/03 Pixel * install_steps.pm: small fixes for LVM (doPartitionDisksAfter): small adaptation for LVMs use run_or_die * fsedit.pm: small fixes for LVM (hds): detect LVMs and return them (add): handling of LVMs (@partitions_signatures): add new magic of reiserfs * bootloader.pm: use run_or_die * run_program.pm (run_or_die, rooted_or_die): created * install_steps_interactive.pm: cleanup * install_any.pm (getHds): handle LVMs. $o->{lvms} contain them (setPackages): ask for installation of package lvm when needed (suggest_mount_points, find_root_parts): take $fstab as arg instead of $hds * install2.pm: small fixes for LVM (formatPartitions): call vgscan if needed when / is mounted * devices.pm (make): better caller in error * share/list: add progs for LVM handling * install_interactive.pm: small fixes for LVM * diskdrake.pm: small fixes for LVM - addition of drive to notebook cleaned - various clean-up - handling of LVMs * standalone/diskdrake: small fixes for LVM small adaptation * lvm.pm: small fixes for LVM creation * partition_table.pm: add isLVMBased 2001/03/02 stew * commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC * install_steps.pm - no bootfloppy, added yaboot.conf - PPC * install_interactive.pm - pdisk vs. fdisk - PPC * bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz 2001/03/02 stew * c/smp.c -stanza for PPC * detect_devices.pm - added code for MO devices * help.pm - help information for yaboot - PPC * partition_table.pm - PPC mods * partition_table_mac.pm - PPC mods * modules.pm - PPC mods - parallel port not used * diskdrake.pm - PPC mods - display like pdisk * install2.pm - PPC mod - no bootdisk * fs.pm - bootstrap partition - PPC 2001/02/27 dam's * standalone/draknet: pop up a dialog to quit X when accepting configuration 2001/02/27 Pixel * partition_table_raw.pm (@MBR_signatures): add yet another grub signature * devices.pm (entry): add fd0H1440 and fd1H1440 * bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be created 2001/02/26 dam's * Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm, pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy * Makefile: typo new pixmap policy * bootlook.pm: typo new pixmap policy need to be merged with bootloader * standalone/draknet: reincluded Gtk + init Gtk thiskind -> thiskind_backend new pixmap policy * standalone/drakboot: short-circuit to bootlook for the moment. 2001/02/26 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers script to produce a correct pot file Updated Estonian and Walloon files * bootlook.pm: changed I_() to _() so xgettext cna find the translatable strings 2001/02/26 Pixel * standalone/drakgw: pixelization * install_steps.pm: remove unneeded "use install_interactive" * install_steps_gtk.pm (copy_advertising): fix changing for advertising_images 2001/02/26 dam's * netconnect.pm: should correct bad resolv.conf when swithcinf in standalone embedded mode. Not Certified fixed standalone edition corrected wizard mode. * Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap policy * standalone/draknet: new pixmap policy fixed standalone edition * bootlook.pm: need to be merged with bootloader * interactive_gtk.pm: if wizard, show the button * standalone/drakboot: short-circuit to bootlook for the moment. 2001/02/26 Pixel * common.pm (if_): fix for use in scalar context * install_steps_interactive.pm (summary): translate mouse description * install_steps.pm: remove unneeded "use install_interactive" * install_steps_gtk.pm (copy_advertising): fix changing for advertising_images 2001/02/26 warly * share/compssUsers, share/rpmsrate: remove some packages 2001/02/26 dam's * interactive_gtk.pm: if wizard, show the button * netconnect.pm: corrected wizard mode. 2001/02/26 Pixel * common.pm (if_): fix for use in scalar context * install_steps_interactive.pm (summary): translate mouse description 2001/02/25 dam's * share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo. * netconnect.pm: profile handling. profile handling corrected wizard. * standalone/draknet: profile handling. profile handling * install_steps_interactive.pm: updated 2001/02/25 Pixel * install2.pm (main): move the load_deps before all the loadO's * install_any.pm (g_auto_install): have formatMountPartitions graphical if $graphical * install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1" for replay * interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists center the chosen value 2001/02/24 Pixel * install_steps.pm, install2.pm: move writing to config files from install2::selectKeyboard to install_steps * share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in the CVS since the current cooker version is too recent * commands.pm (more): handle 'q' to quit 2001/02/24 Pixel * c/Makefile (stuff): fix the fix's fix :'-( * detect_devices.pm (pci_probe): fix to clean the log * install_steps_interactive.pm (setRootPassword): NIS server must be editable 2001/02/23 Pixel * install_any.pm (g_auto_install): handle $replay flag. It means a 'not fully automated install'. * install_steps_auto_install.pm (@graphical_steps): specify which step should be interactive * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed * install_steps.pm (afterInstallPackages): no kdm UserView in NIS (configurePrinter): if_'ization * install_steps_interactive.pm (exitInstall): ask wether Replay or Automated (generateAutoInstFloppy): handle $replay flag. It means a 'not fully automated install'. (summary): nicer mouse name 2001/02/23 dam's * network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard layout, no use gtk in draknet, minor bugfixes 2001/02/23 Franois Pons * pkgs.pm: added accessor the rpmsrate data of packages. avoid rebuilding the database for oem, rpm db is assumed to be fine. * rescue/make_rescue_img: removed kernel_reread program. * rescue/tree/etc/oem: removed server from selection. added mutli CD support to OEM (NFS/DVD transparent) fixed selection of package now select much more than before. fixed root partition size set to the minimum. 2001/02/23 Guillaume Cottenceau * share/rpmsrate: move xterm to SYSTEM 2001/02/23 Pixel * Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if needed * install_steps_auto_install.pm (@graphical_steps): specify which step should be interactive * c/stuff.xs.pm: hack for macroporcessing in term.h use C_DRAKX * install_steps.pm (afterInstallPackages): no kdm UserView in NIS (configurePrinter): if_'ization * share/rpmsrate: add packages installed on demand by DrakX. they are specifically flagged or flagged 'INSTALL' * perl2fcalls: handling of ``package''->import(``what to import'') * interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest * Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0 * install_any.pm (g_auto_install): handle $replay flag. It means a 'not fully automated install'. * c/Makefile.PL: use C_DRAKX * pkgs.pm (setSelectedFromCompssList): fix the fix * c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed add setting C_DRAKX to 1 by default * install_steps_interactive.pm (exitInstall): ask wether Replay or Automated (generateAutoInstFloppy): handle $replay flag. It means a 'not fully automated install'. (summary): nicer mouse name 2001/02/23 Pixel * interactive_gtk.pm (ask_from_entries_refW): double clicking on list means 'Ok' * pkgs.pm (setSelectedFromCompssList): fix sillyness 2001/02/22 dam's * netconnect.pm: corected infinite loop 2001/02/22 Franois Pons * rescue/tree/etc/oem: minor cleanup to edit partition size more easily. brand new version written in perl, support repartitionning on the fly of the hard disk and resize of already present FAT partition. * rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit more cleaner (added dependancy). added missing file for rescue to enable new oem install. 2001/02/22 Guillaume Cottenceau * mdk-stage1/insmod-modutils/include/elf_hppa64.h, mdk-stage1/insmod-modutils/util/alias.h, mdk-stage1/insmod-modutils/util/xstrcat.c, mdk-stage1/insmod-modutils/util/gzfiles.c, mdk-stage1/insmod-modutils/include/elf_arm.h, mdk-stage1/insmod-modutils/util/sys_qm.c, mdk-stage1/insmod-modutils/util/modstat.c, mdk-stage1/insmod-modutils/obj/obj_sparc.c, mdk-stage1/insmod-modutils/include/elf_m68k.h, mdk-stage1/insmod-modutils/Makefile, mdk-stage1/insmod-modutils/util/xstrdup.c, mdk-stage1/insmod-modutils/obj/obj_arm.c, mdk-stage1/insmod-modutils/obj/obj_m68k.c, mdk-stage1/insmod-modutils/obj/obj_hppa64.c, mdk-stage1/insmod-modutils/include/elf_sparc64.h, mdk-stage1/insmod-modutils/util/sys_dm.c, mdk-stage1/insmod-modutils/include/elf_s390.h, mdk-stage1/insmod-modutils/obj/obj_s390.c, mdk-stage1/insmod-modutils/util/xmalloc.c, mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h, mdk-stage1/insmod-modutils/util/xftw.c, mdk-stage1/insmod-modutils/include/elf_i386.h, mdk-stage1/insmod-modutils/util/sys_gks.c, mdk-stage1/insmod-modutils/util/snap_shot.c, mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c, mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h, mdk-stage1/insmod-modutils/include/elf_ppc.h, mdk-stage1/insmod-modutils/obj/obj_reloc.c, mdk-stage1/insmod-modutils/include/elf_sparc.h, mdk-stage1/insmod-modutils/util/sys_nim.c, mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile, mdk-stage1/insmod-modutils/include/elf_hppa.h, mdk-stage1/insmod-busybox/insmod.c, mdk-stage1/insmod-modutils/util/meta_expand.c, mdk-stage1/insmod-modutils/util/arch64.c, mdk-stage1/insmod-modutils/obj/obj_load.c, mdk-stage1/insmod-modutils/obj/obj_hppa.c, mdk-stage1/insmod-busybox/insmod.h, mdk-stage1/insmod-modutils/include/elf_ia64.h, mdk-stage1/insmod-modutils/obj/obj_ia64.c, mdk-stage1/insmod-modutils/obj/obj_sparc64.c, mdk-stage1/insmod-modutils/include/elf_mips.h, mdk-stage1/insmod-modutils/include/module.h, mdk-stage1/insmod-modutils/obj/obj_mips.c, mdk-stage1/insmod-modutils/util/sys_cm.c, mdk-stage1/insmod-modutils/obj/obj_alpha.c, mdk-stage1/insmod-modutils/include/kerneld.h, mdk-stage1/insmod-modutils/util/xrealloc.c, mdk-stage1/insmod-modutils/obj/Makefile, mdk-stage1/insmod-modutils/insmod-frontend.c, mdk-stage1/insmod-modutils/obj/obj_common.c, mdk-stage1/insmod-modutils/include/modstat.h, mdk-stage1/insmod-modutils/util/Makefile, mdk-stage1/insmod-modutils/include/config.h, mdk-stage1/insmod-modutils/util/logger.c, mdk-stage1/insmod-modutils/obj/obj_kallsyms.c, mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h, mdk-stage1/insmod-modutils/util/config.c, mdk-stage1/insmod-modutils/include/version.h, mdk-stage1/insmod-modutils/include/kallsyms.h, mdk-stage1/insmod-modutils/include/elf_alpha.h, mdk-stage1/insmod-modutils/util/sys_oim.c, mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's 2001/02/22 Pixel * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but not over existing /etc/fstab. Fix some stupid stuff * modules.pm, commands.pm: call /usr/bin/insmod_ with full path * install2.pm (main): don't set a special $remote_path PATH for postInstallNonRooted (otherwise install's modprobe is not used, and you can't "modprobe vfat", even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not found. * my_gtk.pm (create_box_with_title): disallow focusing on text if it is non-scrolled 2001/02/22 Guillaume Cottenceau * mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c, mdk-stage1/init-libc-headers.h, mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile, mdk-stage1/init.c, mdk-stage1/minilibc.h, mdk-stage1/dietlibc/include/unistd.h, mdk-stage1/dietlibc/include/sys/socket.h, mdk-stage1/dietlibc/include/signal.h: have "init" compiled against dietlibc (rather than glibc) on non-Intel arch's 2001/02/22 Pixel * install_steps_auto_install.pm: $graphical is now a module variable. Can be changed from everywhere * fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but not over existing /etc/fstab. Fix some stupid stuff * modules.pm, commands.pm: call /usr/bin/insmod_ with full path * install2.pm (main): don't set a special $remote_path PATH for postInstallNonRooted (otherwise install's modprobe is not used, and you can't "modprobe vfat", even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not found. * my_gtk.pm (create_box_with_title): disallow focusing on text if it is non-scrolled * interactive.pm (ask_from_entries_refH_powered_normalize): fix setting type to 'list' in case of format. should be only set if type is unset (ask_from_entries_refH_powered_normalize): if list+format then type is 'list', combo not accepted (hacky?) * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't call create_okcancel 2001/02/22 Pixel * interactive.pm (ask_from_entries_refH_powered_normalize): if list+format then type is 'list', combo not accepted (hacky?) * install_steps_auto_install.pm: $graphical is now a module variable. Can be changed from everywhere * interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't call create_okcancel 2001/02/21 dam's * network.pm, netconnect.pm: netconnect recode, wizard compatible. network.pm modified for wizard. Still need work for ask_yesorno, ask_okcancel. +debugging of course * standalone/draknet: updated (don't remember what) 2001/02/21 Guillaume Cottenceau * mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/minilibc.h, mdk-stage1/minilibc.c, mdk-stage1/init-libc-headers.h: - fix "init" on ppc (do not use minilibc on non-i386 arch's) - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc) - cleanup of "init" * mdk-stage1/init.c: - fix "init" on ppc (do not use minilibc on non-i386 arch's) - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc) - cleanup of "init" fix up syslog logging stuff 2001/02/21 Pixel * install_steps.pm (generateAutoInstFloppy): removed * install_any.pm (g_auto_install): use selected_leaves for default_packages to reduce the list of packages (aka cleanup auto_inst.cfg) (g_default_packages): created * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy and g_default_packages calls in advanced * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use * pkgs.pm (selected_leaves): created * install2.pm (main): do postInstallNonRooted before postInstall (so that 'modprobe vfat' can be done in postInstallNonRooted and used in postInstall) - move the loadO of patch/defcfg after loading modules.dep - generateAutoInstFloppy is no more a step - removed use Data::Dumper 2001/02/21 Chmouel Boudjnah * share/rpmsrate: Add iputils to SYSTEM. 2001/02/21 dam's * docs/wizard.doc: putain de doc de merde pout petite qui est trop dbile * interactive.pm, my_gtk.pm: corrected wizard mode. 2001/02/21 Guillaume Cottenceau * mdk-stage1/TECH-INFOS: sync doc with disk automatic installs * mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk installs 2001/02/21 Pablo Saratxaga * share/po/da.po: updated Danish file 2001/02/21 Pixel * install_steps.pm (generateAutoInstFloppy): removed * install_any.pm (g_auto_install): use selected_leaves for default_packages to reduce the list of packages (aka cleanup auto_inst.cfg) (g_default_packages): created * install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy and g_default_packages calls in advanced * netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use * pkgs.pm (selected_leaves): created * install2.pm (main): do postInstallNonRooted before postInstall (so that 'modprobe vfat' can be done in postInstallNonRooted and used in postInstall) - move the loadO of patch/defcfg after loading modules.dep - generateAutoInstFloppy is no more a step - removed use Data::Dumper 2001/02/20 Pixel * printerdrake.pm: fix typo * install_steps.pm, install_steps_gtk.pm, install_any.pm: better advertising support 2001/02/20 Guillaume Cottenceau * mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP installs, make use of Content-Length when available, to display progressbar 2001/02/20 Pixel * Makefile: various - pcmcia_config.patch now in tools (no more in install which is removed) - copy xpm's (until step icons work with png's) - transform group icons in pngs * modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various * tools/pcmcia_config.patch: pcmcia_config.patch now here * printerdrake.pm: fix typo * install_any.pm, install_steps.pm, install_steps_gtk.pm: better advertising support 2001/02/20 warly * share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate 2001/02/20 Franois Pons * c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE env variable to choose rpmrc file for rpmlib used by DrakX, neccessary for live update from a 7.2 or older. Check that if something goes wrong with rebuilddb, avoid removing old rpm-3 db files. Make sure live_install can start from top directory too. 2001/02/20 Pixel * Makefile: various - pcmcia_config.patch now in tools (no more in install which is removed) - copy xpm's (until step icons work with png's) - transform group icons in pngs * modules.pm, class_discard.pm: various * tools/pcmcia_config.patch: pcmcia_config.patch now here * my_gtk.pm, Xconfigurator.pm: various major move. now ask_from_list returns false when canceled (it doesn't die 'ask_from_list canceled' anymore) * interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm, netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm, any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list returns false when canceled (it doesn't die 'ask_from_list canceled' anymore) 2001/02/19 Guillaume Cottenceau * mdk-stage1/stage1.c: try to print errno's stuff when symlink to /tmp/stage2 failed * mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4 2001/02/19 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Estonian file 2001/02/19 Pixel * interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on cancel * my_gtk.pm (create_packtable): don't use attach_raw anymore (was a sillyme) 2001/02/18 dam's * standalone/draknet: typo make fbastok happy about button placement. little improvements. 2001/02/16 dam's * install_gtk.pm: corrected xpm mask * network.pm: wireless eth support corrected. * share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm, share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm, share/step-orange-on.xpm, share/step-green-on.xpm, share/step-red-click.xpm: re added these xpm files against display mask pb. 2001/02/16 Guillaume Cottenceau * mdk-stage1/init.c: better ansi colors * mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers * mdk-stage1/stdio-frontend.c: display more nicely when there is a long list to choose from (1, 2 or 4 columns) 2001/02/15 Guillaume Cottenceau * mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc 2001/02/15 Pablo Saratxaga * share/po/az.po: updated Azeri file 2001/02/15 Pixel * install_steps_gtk.pm (installPackages): fix i_images * fsedit.pm (suggestions_mntpoint): fix 2001/02/15 Pixel * install_steps_gtk.pm (installPackages): fix i_images (installPackages): traktolpilization and advertising * Makefile (get_needed_files): copy png files instead of xpm's * fsedit.pm (suggestions_mntpoint): fix * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup * share/list: add GdkImlib stuff * perl2fcalls: add Gtk::Gdk::ImlibImage * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share if it exists 2001/02/15 dam's * my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm, install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to test the faces2xpm stuff. * share/step-orange-click.xpm, share/rpm-selected.xpm, share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm, share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm, share/step-red-click.xpm, share/step-green-on.xpm, share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm, share/reload.xpm, share/rpm-semiselected.xpm, share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm, share/step-red-on.xpm: removed, png are used instead. * standalone/draknet: updated internet and added eth conf * share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead. added png images * share/step-red.png, share/step-orange.png, share/reload.png, share/logo-mandrake.png, share/rpm-semiselected.png, share/logo-mandrake-Desktop.png, share/rpm-installed.png, share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png, share/rpm-selected.png, share/step-orange-click.png, share/step-green-click.png, share/step-green.png, share/rpm-base.png, share/logo-mandrake2.png, share/ftin.png, share/help.png, share/step-orange-on.png, share/step-green-on.png, share/ftout.png, share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc, share/rpm-unselected.png: added png images 2001/02/15 Pixel * Makefile (get_needed_files): copy png files instead of xpm's * install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share if it exists (selectKeyboard): give clicked as parameter * my_gtk.pm (gtkcreate_png): add error message, syntax cleanup * fsedit.pm (suggestions_mntpoint): fix typo * share/list: add GdkImlib stuff * perl2fcalls: add Gtk::Gdk::ImlibImage * install_steps_interactive.pm (summary): better message for i18n * install_steps_gtk.pm (installPackages): traktolpilization and advertising 2001/02/14 dam's * network.pm, standalone/draknet: wireless updated * share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin theme :) 2001/02/14 Pixel * install_steps.pm (afterInstallPackages): add user in group usb 2001/02/14 dam's * share/themes-mdk.rc: valentin theme :) added drawing theme section * network.pm: wireless updated updated wireless eth support * standalone/draknet: wireless updated * share/help.xpm, share/logo-mandrake.xpm: valentin theme :) 2001/02/13 dam's * netconnect.pm: network con initiated in draknet. netconnect improvement. typo * network.pm: typo corrected domainname setting * standalone/draknet: network con initiated in draknet. netconnect improvement. 2001/02/13 Guillaume Cottenceau * mdk-stage1/frontend.h, mdk-stage1/network.h, mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c, mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c, mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff * mdk-stage1/modules.c: ask for modules parameters everytime in expert mode, to avoid wrong autodetections in certain cases - better log of nfs mount errors - don't insmod modules already present (important for bzip2 slowness) * mdk-stage1/cdrom.c: better error msg thx to mcdtg * mdk-stage1/mount.c, mdk-stage1/nfsmount.c: - better log of nfs mount errors - don't insmod modules already present (important for bzip2 slowness) * mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue better console messages at startup 2001/02/13 dam's * standalone/draknet: profile handling updated * network.pm: typo corrected domainname setting * netconnect.pm: finished load_conf 2001/02/13 Guillaume Cottenceau * rescue/make_rescue_img, rescue/list: include libs for hostname resolving * mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at startup * mdk-stage1/tools.c: - save /etc/resolv.conf for rescue 2001/02/13 Pixel * install_steps_interactive.pm (selectKeyboard): can be automatic only in non-expert * any.pm: md5 now done via crypt * install_steps.pm (exitInstall): catch exception of output report.bug (for gc) 2001/02/13 Pixel * install_steps_interactive.pm (selectKeyboard): can be automatic only in non-expert * tools/cvslog2changelog.pl: fix for gc & fpons fix for fredl broken CVS * any.pm: md5 now done via crypt * install_steps.pm (exitInstall): catch exception of output report.bug (for gc) 2001/02/13 dam's * network.pm: experimental wireless eth support. Not tested 2001/02/13 Pixel * tools/cvslog2changelog.pl: fix for gc & fpons fix for fredl broken CVS * c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can be done via crypt of glibc, so remove all this 2001/02/13 dam's * any.pm: merging difference * netconnect.pm: corrected profile handling * network.pm: experimental wireless eth support. Not tested 2001/02/12 Pixel * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added docs, rescue, tools) 2001/02/12 Guillaume Cottenceau * mdk-stage1/probing.c: do not close un unbound socket!! * c/stuff.xs.pm: close socket everytime in hasNetDevice * mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future potential confusions * modules.pm: re include some network modules 2001/02/12 Guillaume Cottenceau * rescue/list: fix vi trouble - add lspci, lspcidrake, vim-minimal - better /etc/issue - better PS1 - write embryonic tool (installation of detected drivers according to pci cards) * rescue/aliases, rescue/tree/etc/issue: fix vi trouble * rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: - add lspci, lspcidrake, vim-minimal - better /etc/issue - better PS1 - write embryonic tool (installation of detected drivers according to pci cards) 2001/02/12 Pixel * rescue/drvinst: pixelization * docs/README: fix doc about Mandrake/base/compss * install_steps_gtk.pm (choosePackagesTree): non first choice packages are in "Other". * install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate partitions choice modified. diskdrake in expert asks what kind of auto_allocation is wanted, others choose 'simple' in %fsedit::suggestions * install2.pm: auto_allocate partitions choice modified. diskdrake in expert asks what kind of auto_allocation is wanted, others choose 'simple' in %fsedit::suggestions (main): gc has done it again! /tmp/conf.modules is now /etc/modules.conf, so load both to keep compatibility. * my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list) * interactive_gtk.pm (ask_from_entries_refW): use $common->{advanced_label} (create_ctree): add keyboard shortcuts (create_clist): moveto only if row_is_visible * interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label defaults to _("Advanced") * tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added docs, rescue, tools) * install_steps_interactive.pm (configurePrinter): cleanup, pkg_install_if_requires_satisfied('xpp', 'kups') only if a printer is configured (for the case when _("Would you like to configure a printer?") is answered no) * rescue/tree/etc/rc.sysinit: add floppy module for 2.4 2001/02/10 Pixel * standalone/draknet, standalone/XFdrake: corrected pkgs_install given * install_any.pm: add preConfigureTimezone add step summary. remove steps configureTimezone and configurePrinter * install_interactive.pm: cleanup * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: - lang2keyboards handle keyboard percentages - xmodmaps now named keyboards * install_steps_interactive.pm: add step summary. remove steps configureTimezone and configurePrinter, modify selectKeyboard * install2.pm, timezone.pm, install_steps.pm: add step summary. remove steps configureTimezone and configurePrinter * netconnect.pm: corrected back $install call 2001/02/10 Pixel * standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: - lang2keyboards handle keyboard percentages - xmodmaps now named keyboards * install_steps_interactive.pm: add step summary. remove steps configureTimezone and configurePrinter, modify selectKeyboard * standalone/draknet, standalone/XFdrake: corrected pkgs_install given * install_any.pm: add preConfigureTimezone add step summary. remove steps configureTimezone and configurePrinter * install2.pm, timezone.pm, install_steps.pm: add step summary. remove steps configureTimezone and configurePrinter * install_interactive.pm: cleanup * netconnect.pm: corrected back $install call 2001/02/09 Pixel * install_steps.pm, install_steps_interactive.pm, install2.pm, timezone.pm: configureTimezone doesn't take parameter /etc/sysconfig/clock 2001/02/09 Pixel * interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button handling, quite weird behaviour though cuz of newt sillyness * install2.pm: configureTimezone doesn't take parameter /etc/sysconfig/clock (main): have compatibility with old stage1 (rhimage -> image) (formatPartitions): s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans| as it should now be (see lang.pm 1.143) * install_steps.pm, install_steps_interactive.pm, timezone.pm: configureTimezone doesn't take parameter /etc/sysconfig/clock 2001/02/09 siegel * share/po/de.po: new german version 2001/02/08 dam's * standalone/drakgw: implemented or updated embedded mode added embedded and (ugly) wizard mode. * standalone/printerdrake, standalone/mousedrake, standalone/diskdrake, standalone/keyboarddrake: implemented or updated embedded mode * standalone/draknet: implemented or updated embedded mode added embedded mode * standalone/XFdrake: implemented or updated embedded mode corrected compilation bug. * standalone/drakboot: implemented or updated embedded mode updated embedded mode. Should work, not tested in real world * netconnect.pm: removed testing wizard instruction 2001/02/08 Franois Pons * ftp.pm: fixed wrong URLPREFIX formation if no user given. * standalone/XFdrake: fix the previous changelog wich was wrong (bad spelling), added a char in comment to allow a new release (thanks to pixel :-) make sure SHARE_PATH is set. fixed SHARE_PATH to make sure it is setted. * Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer XF3 for SiS card. * pkgs.pm: fixed problem for updating hdlist after going back to partition step. 2001/02/08 Guillaume Cottenceau * mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c: better memory detection (from wonderful drakx) 2001/02/08 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Norwegian file 2001/02/08 Pixel * common.pm (availableRamMB): cleanup * standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in standalone 2001/02/07 Franois Pons * install_any.pm: fixed unknown package ARRAY... and locales selection according to langs. * modules.pm: fixed module name without text for SCSI configuration dialog, add log. 2001/02/07 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h, mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c, mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c, mdk-stage1/network.c: - use description of network cards when you have to select between interfaces; has accuracy even in the case of multiple interface for a given kernel module - write down a small "shell" to change parameters on the fly (needs compile option SPAWN_INTERACTIVE) 2001/02/07 Pixel * install_steps_interactive.pm (choosePackages): better fix for getting max install size. (choosePackages): call setSelectedFromCompssList with empty compssUsersChoice meaning max * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB 2001/02/07 Franois Pons * install_any.pm: fixed unknown package ARRAY... and locales selection according to langs. 2001/02/07 Pixel * install_steps_interactive.pm (choosePackages): better fix for getting max install size. (choosePackages): call setSelectedFromCompssList with empty compssUsersChoice meaning max * common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB 2001/02/07 Guillaume Cottenceau * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show 8.0 * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave hostname+domain 2001/02/07 Pixel * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) * install_steps_interactive.pm (miscellaneous): remove asking about numlock and hd optimizations, deprecates it (aka don't do anything) * Xconfigurator.pm (main): don't need isLaptop anymore, use detect_devices::hasPCMCIA * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default value of memsize if given (install): save CLEAN_TMP in sysconfig/system (get_append, add_append): get or set an append value (has_profiles, set_profiles): get or add an entry office for profiles, also add prof=Home in the default entry * any.pm (setupBootloader): take care of profiles and memsize (facesnames): only display icons capitalized. This goes along the new mandrake_desk where capitalized named faces are the new one. [a-z].* icons being only kept for compatibility. (in case no capitalized icons available display everything (compatibility with old mandrake_desk) * standalone/draknet, standalone/XFdrake: don't pass isLaptop * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove taking care of profiles and memsize. Now in any & bootloader (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in $o->{miscellaneous} anymore * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm * netconnect.pm: remove the $isLaptop unused from a hell lot of functions * install2.pm (@installSteps): remove miscellaneous (main): don't remove pcmcia modules anymore (not there anymore), remove /sbin/stage1 2001/02/07 Guillaume Cottenceau * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show 8.0 * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave hostname+domain 2001/02/07 Pixel * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) * install_steps_interactive.pm (miscellaneous): remove asking about numlock and hd optimizations, deprecates it (aka don't do anything) * Xconfigurator.pm (main): don't need isLaptop anymore, use detect_devices::hasPCMCIA * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default value of memsize if given (install): save CLEAN_TMP in sysconfig/system (get_append, add_append): get or set an append value (has_profiles, set_profiles): get or add an entry office for profiles, also add prof=Home in the default entry * any.pm (setupBootloader): take care of profiles and memsize (facesnames): only display icons capitalized. This goes along the new mandrake_desk where capitalized named faces are the new one. [a-z].* icons being only kept for compatibility. (in case no capitalized icons available display everything (compatibility with old mandrake_desk) * standalone/draknet, standalone/XFdrake: don't pass isLaptop * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove taking care of profiles and memsize. Now in any & bootloader (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in $o->{miscellaneous} anymore * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm * netconnect.pm: remove the $isLaptop unused from a hell lot of functions * install2.pm (@installSteps): remove miscellaneous (main): don't remove pcmcia modules anymore (not there anymore), remove /sbin/stage1 2001/02/07 Chmouel Boudjnah * share/rpmsrate: Add usbd to SYSTEM. 2001/02/07 dam's * netconnect.pm: updated wizard mode, intro and other stuff * interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode * share/logo-mandrake.xpm: new logo 2001/02/07 Franois Pons * http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too) caused by forked DrakX with latent ftp connection. 2001/02/07 Guillaume Cottenceau * mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show 8.0 * mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave hostname+domain 2001/02/07 Pixel * share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-( * detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia) * install_steps_interactive.pm (miscellaneous): remove asking about numlock and hd optimizations, deprecates it (aka don't do anything) * Xconfigurator.pm (main): don't need isLaptop anymore, use detect_devices::hasPCMCIA * bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default value of memsize if given (install): save CLEAN_TMP in sysconfig/system (get_append, add_append): get or set an append value (has_profiles, set_profiles): get or add an entry office for profiles, also add prof=Home in the default entry * any.pm (setupBootloader): take care of profiles and memsize (facesnames): only display icons capitalized. This goes along the new mandrake_desk where capitalized named faces are the new one. [a-z].* icons being only kept for compatibility. (in case no capitalized icons available display everything (compatibility with old mandrake_desk) * standalone/draknet, standalone/XFdrake: don't pass isLaptop * install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove taking care of profiles and memsize. Now in any & bootloader (miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in $o->{miscellaneous} anymore * install_gtk.pm (create_help_window, create_logo_window): use gtkxpm * netconnect.pm: remove the $isLaptop unused from a hell lot of functions * install2.pm (@installSteps): remove miscellaneous (main): don't remove pcmcia modules anymore (not there anymore), remove /sbin/stage1 2001/02/07 siegel * share/po/de.po: new german version 2001/02/06 Franois Pons * ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid opening and closing connection too fast for each transaction). There seems to be some problem for retrieving twice a package, this cause huge pause between each transaction, the best is to avoid them so ? 2001/02/06 Guillaume Cottenceau * mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c, mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: - slighty change the message when exiting successfully from install, to not mess with abnormal termination - get back dialog for hostname and domain in case of unable to guess domain - try to resolve DNS if self-ip can't resolve, to guess domain - remember entries so that when there is a problem you don't have to re-enter everything (ncurses sucking stuff in case of stdio-frontend..) - use larger buffer for list_directory since in /dev there can be *many* files 2001/02/05 dam's * Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles. * standalone/draknet: added infos recovering. * netconnect.pm: added load_conf() to recover saved infos from conffile. 2001/02/05 Franois Pons * install_any.pm: removed abusive white char. updated to use urpmi new format (change fakemedium to better label) fixed frame buffer usage if not enabled (installation of Aurora) clean up and remove unused code. * ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore. * pkgs.pm: updated to use urpmi new format (change fakemedium to better label) * Xconfigurator.pm: Removed Device3Dfx as it is no more. * install_steps.pm: fixed frame buffer usage if not enabled (installation of Aurora) clean up and remove unused code. 2001/02/05 Pablo Saratxaga * share/list: updated list of gconv modules 2001/02/05 Pixel * commands.pm (head_tail): fix usage * interactive_gtk.pm (create_ctree): node_moveto done only if node_is_visible is not full 2001/02/04 Guillaume Cottenceau * mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with file-not-found in args 2001/02/04 Pixel * interactive_newt.pm: fix adaptation to the terminal size, should now work in 80x25 * Xconfigurator.pm (monitorConfiguration): better handling of auto_install * install_steps_interactive.pm (choosePackages): don't call chooseSizeToInstall even with experts * install_steps_gtk.pm (charsetChanged): re-create steps window 2001/02/03 dam's * modules.pm, standalone/draknet, netconnect.pm: corrected module.conf update, net conf saving, and no wizard by default. 2001/02/03 Pablo Saratxaga * share/po/da.po: updated Danish file 2001/02/03 Pixel * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in auto_installs * install_steps_gtk.pm (charsetChanged): created, takes care of setting to the right charset the windows * install_steps_interactive.pm (selectLanguage): call charsetChanged * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"'' move ftp to SYSTEM so that it is installed * Makefile: install cardmgr * modules.pm (configure_pcmcia): cleanup 2001/02/03 Pixel * Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in auto_installs * install_steps_gtk.pm (charsetChanged): created, takes care of setting to the right charset the windows * install_steps_interactive.pm (selectLanguage): call charsetChanged * share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"'' move ftp to SYSTEM so that it is installed * Makefile: install cardmgr * modules.pm (configure_pcmcia): cleanup 2001/02/02 dam's * share/wizard.rc: added rc file for wizard mode 2001/02/02 Pixel * Xconfigurator.pm (monitorConfiguration): better default for DDC probe fails and auto_install and not provided any info about the monitor * my_gtk.pm (gtkcreate_xpm): error handling with error message * share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in /etc/sysconfig/i18n * mdk-stage1/disk.c (try_with_device): bloody guillaume changed /tmp/hdimage to /tmp/disk without even telling, changing it back as i don't see any good reason for the move. * install_any.pm (setPackages): in auto_installs, default to all groups chosen, unless compssUsersChoice exist. Won't change anything unless compssListLevel is used of course * Xconfigurator_consts.pm: add low_default_monitor for default of auto_installs * interactive_gtk.pm (ask_from_entries_refW): use gtkxpm * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm, diskdrake.pm: using the new formatXiB * detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to the fact that kernel 2.4 uses /proc/driver/array instead of /proc/array. Also adapted the regexp now that ida/c0d0p? is no more at the beginning of the line. (get): cleanup, remove hasIDE hasSCSI... * common.pm (formatXiB): created, format a number in human readable format 2001/02/02 Pixel * mdk-stage1/disk.c (try_with_device): bloody guillaume changed /tmp/hdimage to /tmp/disk without even telling, changing it back as i don't see any good reason for the move. 2001/02/02 dam's * interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm, standalone/diskdrake: recoded wizard mode corrected some stuff. trying not to break draknet for cooker snapshot 2001/02/02 Pixel * Xconfigurator.pm (monitorConfiguration): better default for DDC probe fails and auto_install and not provided any info about the monitor * install_any.pm (setPackages): in auto_installs, default to all groups chosen, unless compssUsersChoice exist. Won't change anything unless compssListLevel is used of course * share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i chose was glibc-2.1 :-( this one en_US and seems all right! * Xconfigurator_consts.pm: add low_default_monitor for default of auto_installs * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm, diskdrake.pm: using the new formatXiB * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in /etc/sysconfig/i18n * common.pm (formatXiB): created, format a number in human readable format * mdk-stage1/disk.c (try_with_device): bloody guillaume changed /tmp/hdimage to /tmp/disk without even telling, changing it back as i don't see any good reason for the move. 2001/02/01 dam's * standalone/draknet: new draknet snapshot. Still unuseable * interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in install. 2001/01/31 dam's * standalone/draknet: corected translation and conflict. 2001/01/31 Franois Pons * modules.pm: added missing die if modprobe failed on live upgrade. * pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm file if everything has been successfull. * install_steps.pm: changed to clean selection for non expert as used for group selection because it is not cleaned, need better solution TODO. 2001/01/31 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES BEFORE COLON (:); and it is "Profile" and not "Profil") CV: ---------------------------------------------------------------------- 2001/01/31 Pixel * install_steps_interactive.pm (choosePackagesTree): created, simple ask_many_from_list to choose individual packages (choosePackages): log for debug (choosePackages): don't ask to install in beginner. Max is chosen (setRootPassword): help not based on installClass being server or not (selectInstallClass): remove installClass choice (was normal/devel/server) (chooseGroups): fix for individual package selection flag * netconnect.pm (get_net_device): more cleanup syntax (get_net_device): cleanup syntax * install_steps.pm (selectLanguage): warning for debug (miscellaneousBefore): don't use installClass to decide to use supermount or not. Choice is done on $::corporate. Can't say "no supermount in server installs" anymore (selectInstallClass): emptied (setupSCSI): don't configure PCMCIA if there is no PCMCIA * install_any.pm (g_auto_install): installClass removed (setPackages): do not preselect compssUsers entries * install2.pm (main): don't set installClass=normal meta_class desktop (deprecated) (miscellaneous): TYPE= removed (was installClass) (selectInstallClass): don't set $o->{partitions}. diskdrake will have to ask in a set of possibilities ($o): replace fclass by fbeginner and fexpert ($o): default security level to 2 since it can't be based on installClass (deprecated) * install_steps_gtk.pm: restore window size for time being * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate * Xconfigurator.pm (main): better error message for auto_install failing * interactive.pm (ask_many_from_list): fix sorting * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by drakx. Still need finding the guilty 2001/01/31 Pablo Saratxaga * keyboard.pm: more kbd corrections fixed soem keybopard values 2001/01/31 Pixel * install_steps_interactive.pm (choosePackagesTree): created, simple ask_many_from_list to choose individual packages (choosePackages): log for debug (choosePackages): don't ask to install in beginner. Max is chosen (setRootPassword): help not based on installClass being server or not (selectInstallClass): remove installClass choice (was normal/devel/server) (chooseGroups): fix for individual package selection flag * install_steps.pm (selectLanguage): warning for debug (miscellaneousBefore): don't use installClass to decide to use supermount or not. Choice is done on $::corporate. Can't say "no supermount in server installs" anymore (selectInstallClass): emptied (setupSCSI): don't configure PCMCIA if there is no PCMCIA * install_any.pm (g_auto_install): installClass removed (setPackages): do not preselect compssUsers entries * install2.pm (main): don't set installClass=normal meta_class desktop (deprecated) (miscellaneous): TYPE= removed (was installClass) (selectInstallClass): don't set $o->{partitions}. diskdrake will have to ask in a set of possibilities ($o): replace fclass by fbeginner and fexpert ($o): default security level to 2 since it can't be based on installClass (deprecated) * install_steps_gtk.pm: restore window size for time being * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate * Xconfigurator.pm (main): better error message for auto_install failing * interactive.pm (ask_many_from_list): fix sorting * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by drakx. Still need finding the guilty 2001/01/30 dam's * standalone/draknet: new draknet. unstable * netconnect.pm: updated debugged network card configuration after pixelisation. 2001/01/30 Guillaume Cottenceau * mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from trying to set progressbar to more than 100% (rescue is more compressed than drakx) * share/rpmsrate: add ldetect to config stuff I want to have on all installs (lspcidrake) 2001/01/30 Pixel * install_steps_interactive.pm, netconnect.pm, install_interactive.pm: adapt format functions given to ask_from_listf. $_ is no more set * mouse.pm (detect): replace commands::modprobe by modules::load as it should (or??) * perl2etags: adapt to new etags (emacs 21) format * raid.pm (make): replace commands::modprobe by modules::load as it should (or??) * perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his regexps * share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number separator instead of ".". The sheer result is: "0.6" * 10 gives 0 "0,6" * 10 gives 6 So i have overwritten misc/LC_NUMERIC with /usr/share/locale/en/LC_NUMERIC and it works nicely now :) 2001/01/29 dam's * standalone/drakboot: corrected typo 2001/01/29 Guillaume Cottenceau * modules.pm: - deprecate "hdreiser.img" since we have room for "reiserfs.o" in "hd.img" - following deprecation of "other.img", reintegrate big modules in relevant boot disks 2001/01/29 Pablo Saratxaga * lang.pm, share/po/et.po: updated Estonian file 2001/01/29 Pixel * detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain more than one ida/c0d0p* 2001/01/28 dam's * share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 siegel * share/po/de.po: new german version 2001/01/26 dam's * interactive_gtk.pm: updated embedded mode * standalone/drakboot: added embedded mode 2001/01/26 Guillaume Cottenceau * mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile bzlib * mdk-stage1/stage1.c: restore passing of pcmcia info to stage2 * mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c, mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c, mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c, mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile, mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: - use bzlib instead of zlib to reduce overall size - take home my own bzlib code to (1) reduce code size with good compile options (2) make it compile and link against dietlibc * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h, mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h, mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib * mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/26 siegel * share/po/de.po: . 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/25 dam's * install2.pm: disable steps 'packages choice', 'configure X', and 'configure' 'printer' * install_steps_interactive.pm: don't oblige user addition * network.pm: display ethernet module * netconnect.pm: network informations filled into $prefix/var/lib/naat/configuration 2001/01/25 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh -> /usr/bin/sh for stage2 * mdk-stage1/probing.h: better tightness of probing stuff * mdk-stage1/probing.c: better tightness of probing stuff print warning message when insmod of PCI-detected device fails * mdk-stage1/stage1.c: - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives - remove fat/vfat modules from some boot floppies now that we don't need it anymore * mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of tulip network cards, kernel-2.4 has strange way to classify some of its net modules.. 2001/01/25 Pablo Saratxaga * share/po/it.po: Waw, italian translator is very fast :) updated Indonesian and Italian fiels * share/po/id.po: updated Indonesian and Italian fiels * share/locales.tar.bz2: added iso9 locale definitions * lang.pm: fixed LANGUAGE for mk locale 2001/01/25 Pixel * install_any.pm (spawnShell): fix error message 2001/01/24 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: - clean up deprecated symlinks (insmod, rmmod, cardmgr) - remove unecessary device files * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia 2001/01/24 Pixel * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun * install_steps.pm (afterInstallPackages): cleanup * interactive.pm: better documentation of ask_from_entries_refH features (entry) 2001/01/24 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: - clean up deprecated symlinks (insmod, rmmod, cardmgr) - remove unecessary device files * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia 2001/01/24 Pixel * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun * install_steps.pm (afterInstallPackages): cleanup * interactive.pm: better documentation of ask_from_entries_refH features (entry) 2001/01/23 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file 2001/01/22 dam's * install_steps_interactive.pm, netconnect.pm: corrected slide bar, and added network conf save in /root/networking.tmp 2001/01/22 Guillaume Cottenceau * mdk-stage1/network.c: add automatic support in choice of NET device, in case of multiple NET devices consistent dot-terminated error messages, consistent no-dot log messages re-put Netmask input per default (void entry -> automatic guess) * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent dot-terminated error messages, consistent no-dot log messages 2001/01/22 Pablo Saratxaga * share/po/id.po: updated Indonesian file * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated po files * share/po/wa.po: updated po files updated pot file * install2.pm, lang.pm: fixed the places where console fonts and related files are put under /etc/sysconfig to the places really used by console-tools * share/po/DrakX.pot: updated pot file * share/po/hr.po: updated po files updated Croatian file 2001/01/22 Pixel * pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way, read_rpmsrate can be called standalone. * network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm, install_interactive.pm, install2.pm, partition_table.pm, install_any.pm, any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is deprecated, replaced by !$::expert 2001/01/21 Guillaume Cottenceau * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in network/ftp installs 2001/01/21 Pixel * interactive_gtk.pm (create_ctree): fix case with formatted list 2001/01/21 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in network/ftp installs 2001/01/21 Pixel * interactive_gtk.pm (create_ctree): fix case with formatted list 2001/01/21 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's 2001/01/21 Pablo Saratxaga * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files 2001/01/21 Guillaume Cottenceau * mdk-stage1/nfsmount.c: fix remaining perror's * mdk-stage1/stage1.c: fix remaining perror's - better msg in fatal errors - do not include code to spawn a shell for releases 2001/01/21 Pablo Saratxaga * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files 2001/01/21 Pixel * install_steps_interactive.pm (selectMouse): use ask_from_treelist_ * interactive.pm (ask_from_treelist_): created, split with the separator, call translate on words, then re-join. 2001/01/19 Franois Pons * install_any.pm: fixes for CD not changeable. * install_steps_interactive.pm: fixed unselect group and inoperant individual package selection. removed expert mode and install class. 2001/01/18 Franois Pons * install_steps.pm: fixed obligation of relative large install, now minimum is lesser. * install_steps_gtk.pm: make sure no ratio above 1 can occur, still need to see why as it happens on install-abort-choices-install or install-abort-choices-fs-format(none)-choices-install * live_install: update live install to match /tmp/image instead of /tmp/rhimage. 2001/01/17 Franois Pons * install_steps.pm, install_any.pm: fixes with /tmp/rhimage and /tmp/image. * pkgs.pm: update to use new header file format in hdlist (added arch) but depslist has not it... * install2.pm: fixes with /tmp/rhimage and /tmp/image 2001/01/16 Pablo Saratxaga * share/po/bg.po: updated bulgarian file 2001/01/12 Guillaume Cottenceau * mdk-stage1/url.c: use strrchr instead of doing it by hand * mdk-stage1/insmod-busybox/busybox.h, mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c: - replace remaining perror's with log_perror's - little code cleanup * mdk-stage1/stage1-data/stage1.tar.bz2, mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0 * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c, mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: - add load of third party modules in Expert mode (PS rulz) 2001/01/12 siegel * share/po/de.po: updates 2001/01/12 Franois Pons * install_steps_interactive.pm: fixed addUser for invocation of any::ask_users. fixed bad invocation of installation of X server. 2001/01/12 Guillaume Cottenceau * mdk-stage1/cdrom.c: add more memory carefulness with CDROM install - add wait_message for initializing of CDROM's (it can be long when it's SCSI) - print CDROM drive names (model) in dialogs * mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: - fix behaviour with bad ISO images (DISK installs) - better dialogs for DISK installs 2001/01/12 Pablo Saratxaga * lang.pm: make lang list in format for tree-selector 2001/01/11 Guillaume Cottenceau * mdk-stage1/disk.c: fix failing umount for DISK installs in some failing loopback situations act nicely when no partitions are found on some disk * mdk-stage1/modules.h: polish generic blank.img situation (no modules and/or modules.dep available) * mdk-stage1/lomount.c: fix failing umount for DISK installs in some failing loopback situations better log messages continue anyway when insmod'ing of modules fail (for blank.img) * mdk-stage1/probing.c: close some fd's * mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img situation (no modules and/or modules.dep available) continue anyway when insmod'ing of modules fail (for blank.img) 2001/01/11 Guillaume Cottenceau * mdk-stage1/Makefile, mdk-stage1/disk.c: - add DISK install from ISO image file - add FTP - add HTTP - use single place for mountpoints and static directories * mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: - add DISK install from ISO image file * mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h, mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c, mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: - add FTP - add HTTP - use single place for mountpoints and static directories * mdk-stage1/insmod-busybox/Config.h: tweak config 2001/01/11 Pixel * standalone/adduserdrake: adduserdrake may handles autologin * install_steps.pm (addUser): set autologin * install2.pm (addUser): moved setAuthentication to install_steps::addUser * install_steps_interactive.pm (addUser): fix 2001/01/11 dam's * install_steps.pm, install_steps_interactive.pm, ChangeLog, netconnect.pm: updated 2001/01/11 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when mar or marfiles not available to perform consistency check 2001/01/11 Pixel * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * interactive_gtk.pm (create_ctree): fix default value selecting failing (in case of "format") (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/11 Pixel * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/11 Pixel * Xconfigurator.pm (autologin): moved to package any * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated) * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/10 Guillaume Cottenceau * mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal size * mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c: remove warnings from compile 2001/01/10 Pixel * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' callback on clist/list/ctree * install_steps.pm (addUser): use any::pack_passwd (setRootPassword): use any::unpack_passwd and any::pack_passwd * Xconfigurator.pm (cardConfiguration): adapt for $install which is generic (autologin): use $install which is now generic * install_steps_interactive.pm (selectLanguage): many_languages choice moved there as advanced * my_gtk.pm (create_packtable): yet another try to have something nice :) !! uses Gtk::Table::attach_raw which is available in perl-GTK-0.7004-6mdk !! (create_box_with_title): with the size given to set_usize for the scroll containing the text widget in case of long text. and don't let the scroll grow. (gtktext_insert): remove adding an ending "\n" (no more needed?) * any.pm (setAutologin): cleanup (pack_passwd, unpack_passwd): created 2001/01/10 dam's * install_steps_interactive.pm: corrected last message . firewall 2001/01/10 Guillaume Cottenceau * modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm, parport*, plip) 2001/01/10 Pixel * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' callback on clist/list/ctree * install_steps.pm (addUser): use any::pack_passwd (setRootPassword): use any::unpack_passwd and any::pack_passwd * my_gtk.pm (create_packtable): yet another try to have something nice :) !! uses Gtk::Table::attach_raw which is available in perl-GTK-0.7004-6mdk !! (create_box_with_title): with the size given to set_usize for the scroll containing the text widget in case of long text. and don't let the scroll grow. (gtktext_insert): remove adding an ending "\n" (no more needed?) * any.pm (setAutologin): cleanup (pack_passwd, unpack_passwd): created * Xconfigurator.pm (cardConfiguration): adapt for $install which is generic (autologin): use $install which is now generic * install_steps_interactive.pm (selectLanguage): many_languages choice moved there as advanced * standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2, standalone/livedrake, standalone/drakboot, standalone/draksec, standalone/netdrake, standalone/mousedrake, standalone/drakgw, standalone/drakxservices, standalone.pm, standalone/draknet, standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake, standalone/drakxconf: use standalone and standalone::pkgs_install 2001/01/09 Pixel * any.pm (drakx_version): nicer (4gc) * install2.pm (main): log::l the drakx_version * my_gtk.pm (create_packtable): no_expand option added * interactive.pm (ask_from_entries_refH_powered_normalize): field "disabled" added, "advanced_messages" added * lang.pm (langs): created (transform the $o->{langs} hash ref in a list) (pack_langs): use lang::langs * install_steps.pm (selectLanguage): $o->{langs} is now a ref so initialize as such * Makefile (get_needed_files): generate /usr/share/VERSION which contains the version of ChangeLog (which is updated at each upload) * install_steps_interactive.pm (choosePartitionsToFormat): handle "check for bad blocks" as advanced (setRootPassword): remove choosing non-md5 or non-shadow passwords. * install_any.pm (setPackages): use lang::langs instead of using $o->{langs} as a array ref (it is not so anymore) (spawnShell): print the drakx_version 2001/01/08 Pixel * interactive.pm: fixes (ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH (ask_from_entries_refH_powered): remove "1;" (was there for debugging) * interactive_gtk.pm: fixes (ask_from_treelistW): removed (create_ctree): created, used for ``type => treelist'' entries * my_gtk.pm: fixes * ChangeLog: New snapshot uploaded 2001/01/07 Pablo Saratxaga * share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated Czech, Norwegian and Serbian files 2001/01/07 Pixel * install_steps_interactive.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered (selectLanguage, selectKeyboard): use ask_from_entries_refH instead of ask_from_listf_, it enables the use of advanced * any.pm, printerdrake.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered * interactive.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered (ask_from_listf_no_check): replaces ask_from_list_no_check (ask_from_entries_refH_powered): sorts the list if needed or wanted * partition_table_raw.pm (test_for_bad_drives): created - ugly stuff needed mainly for Western Digital IDE drives - try writing what we've just read, yells if it fails - testing on last sector of head #0 (unused in 99% cases) * ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an non-existent file, stressing the ftp server :-/ ) for the moment, just release cdrom.img, hd.img and hdreiser.img others should should come... * install_steps.pm: for the moment, just release cdrom.img, hd.img and hdreiser.img others should should come... * interactive_gtk.pm (ask_from_listW): removed (create_list): calls "format" on list elems before prompting them (create_clist): created (ask_from_entries_refW): calls create_clist in case of list with no help * install_steps_gtk.pm (installPackages): autoflush stdout before beeping (installPackages): don't take into account the time when prompting the user * common.pm (may_apply): added * install_any.pm (getHds): test_for_bad_drives called on hard drives (getHds): ensure $o->{hds} is not set until the hard drives are checked 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * ChangeLog: New snapshot uploaded New snapshot uploaded 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * ChangeLog: New snapshot uploaded 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * standalone/rpmdrake: deprecated (and has been for a long time now) * network.pm, install_steps_interactive.pm, netconnect.pm, install_interactive.pm, standalone/adduserdrake, any.pm, Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: ask_from_entries_refH parameter format has changed so change all accesses to it. 2001/01/05 Franois Pons * lang.pm, keyboard.pm: forget _exit in child process after a fork of DrakX removed need of packdrake binary * Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames * live_install2: cleanup to keep libperl.so but the right one * live_install: no more copy of files on live system, now use environment variable by DrakX cleanup * perl2fcalls: added packdrake call (via new but incomplete) and package * install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary * netconnect.pm: fixed syntax error * modules.pm: eval insmoding ide-cd (just in case) removed need of packdrake binary 2001/01/05 Pablo Saratxaga * share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan and Japanese files 2001/01/05 Pixel * mouse.pm: help cperl-mode * interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm, interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to new ask_from's: - ask_from_entries_ref is deprecated, use ask_from_entries_refH - ask_from_list now calls ask_from_entries_refH_powered still not done: - ask_from_treelist should use ask_from_entries_refH_powered, and lists with no help should use CList (List is bad) - keyboard and mouse binding is still rough - enhance the look * keyboard.pm: add the percentage of each keyboard types (as a comment for now) 2001/01/04 dam's * netconnect.pm: cleaned... everything should be buggy. 2001/01/04 Franois Pons * pkgs.pm: fixed some old $p->{file} by new $p->[$FILE] code cleanup and fixes for lilo not upgrade 2001/01/04 Pablo Saratxaga * install_any.pm: fixed the functions doing the lists of languages * lang.pm: fixed the functions doing the lists of languages The list of languages now has complete locale names insted of just language code (that is needed to differentiate zh_CN and zh_TW among others) * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file * share/po/eu.po: updated Basque file updated Brazilian file 2001/01/04 Pixel * Xconfigurator.pm: some pixelization using the new if_ * install_steps_interactive.pm (setRootPassword): fix pixelization keep $o->{langs} unpacked to simplify things if_ pixelization * common.pm (%EXPORT_TAGS): add if_ in "common" exported tags (if_): created. Use it to replace things like ($::expert ? $val : ()) by if_($::expert, $val) * keyboard.pm: nl keyboard is not used, so defaults to us_intl * lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs} unpacked to simplify things * netconnect.pm: quite a few clean-up (and buggying) 2001/01/03 dam's * install_steps_interactive.pm: admin user removed before beeing added * netconnect.pm: corrected typo LAN is configured with default value if firewall 2001/01/03 Franois Pons * diskdrake.pm: fixed invocation of change_type by clicking on legend unless expert * install2.pm: fixed usage with testing * install_steps.pm: fixed some other services to start in case something gets wrong, this fixes some deadlock on upgrade from 7.0. fixed usage with testing * partition_table.pm: fixed overlapping partitions between one extended and one regular primary. should be accepted (log printed instead of error) as diskdrake allow their creation in expert. 2001/01/03 Guillaume Cottenceau * modules.pm: add checks of dependencies on marfiles fix a couple of broken dependencies in modules.pm 2001/01/03 Pablo Saratxaga * lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format 2001/01/03 Pixel * install2.pm (main): move the setting of PATH and spawnShell *after* setting $prefix 2000/12/31 Pablo Saratxaga * share/rpmsrate: added a few locales dependences 2000/12/29 Pixel * install_steps.pm (addUser): typo fix * ChangeLog: New snapshot uploaded * ftp.pm (getFile): recall getFile after rewindGetFile 2000/12/29 Pixel * install_steps.pm (addUser): typo fix * ftp.pm (getFile): recall getFile after rewindGetFile 2000/12/28 Pixel * Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and jako 2000/12/26 Chmouel Boudjnah * keyboard.pm: Add the very ghost option REMOVE_MOD_META_L. 2000/12/26 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Lithuanian file 2000/12/22 dam's * install_steps.pm, install_steps_interactive.pm: corrected admin user setting for firewall install. 2000/12/22 Franois Pons * modules.pm: fixed load_multi on live. added back all removed module with the new great mdk-stage1 of gg. 2000/12/22 Guillaume Cottenceau * modules.pm: make them work with kernel-2.4 by disabling non existent modules 2000/12/22 Pixel * interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage 2000/12/21 Pixel * ChangeLog: New snapshot uploaded 2000/12/21 dam's * install2.pm: firewall : automatic class set when firewall (beginner=0) * install_steps_interactive.pm: if firewall, admin password obliged * install_steps.pm: added setAdminpassword (a little bit redundant, sorry) * any.pm: corrected module stuff.. Thanx to pixel 2000/12/20 Pixel * install_steps_gtk.pm (selectMouse): unsure the device exists * unused/christmas-karaoke.patch: handle isa cards 2000/12/19 Pixel * ChangeLog: New snapshot uploaded New snapshot uploaded 2000/12/19 dam's * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/draknet3.xpm: added control-center. 2000/12/19 Pixel * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss * unused/christmas-karaoke.patch: Happy Christmas :) * install_any.pm: spawnShell: set DISPLAY, just in case :) * install2.pm: set PATH before doing spawnShell * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) * ChangeLog: New snapshot uploaded 2000/12/18 dam's * interactive_gtk.pm: added embedded support for control-center corrected embedded support. new control center and related * netconnect.pm: corrected typo corrected typo * standalone/drakxservices, standalone/control-center, ChangeLog, standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, standalone/drakboot: new control center and related * install_gtk.pm: added firewall support * install2.pm: included firewall handling changed firewall comportement * install_steps_interactive.pm: changed firewall comportement * modules.pm: corrected bad mergeinconf 2000/12/18 Pixel * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more cfI/xfI remove isdndb.net 2000/12/19 dam's * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/draknet3.xpm: added control-center. 2000/12/19 Pixel * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss * unused/christmas-karaoke.patch: Happy Christmas :) * install_any.pm: spawnShell: set DISPLAY, just in case :) * install2.pm: set PATH before doing spawnShell * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) 2000/12/18 dam's * interactive_gtk.pm: added embedded support for control-center corrected embedded support. new control center and related * netconnect.pm: corrected typo corrected typo * standalone/drakxservices, standalone/control-center, ChangeLog, standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, standalone/drakboot: new control center and related * install_gtk.pm: added firewall support * install2.pm: included firewall handling changed firewall comportement * install_steps_interactive.pm: changed firewall comportement * modules.pm: corrected bad mergeinconf 2000/12/18 Pixel * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more cfI/xfI remove isdndb.net 2000/12/16 Pixel * standalone/mousedrake, standalone/drakgw: use ldetect-lst * Makefile.drakxtools: fix daminetsex use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * share/list: use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * any.pm: fix daminetsex * modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm, mouse.pm: use ldetect-lst for usb => now auto detects mice types :) * c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto detects mice types :) use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * Makefile.config: fix daminetsex use ldetect-lst * Makefile: use ldetect-lst for usb => now auto detects mice types :) use ldetect-lst * netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm, Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net, share/Cards2CardsNames: pci_probing now done by libldetect config files moved in package ldetect-lst 2000/12/15 Pixel * Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst * install_steps.pm: clean all unneeded stuff 2000/12/14 dam's * any_new.pm, netconnect_new.pm: preparing for big jump. * netconnect.pm: Big jump. The *_new.pm are replaced by *.pm Everything should work, but you better test :) * standalone/control-center: big improvement and cosmetic changes a lot of improvement. Is able to launch multiples soft passing in arguments. new file. Its location should change soon. * any.pm: Big jump. The *_new.pm are replaced by *.pm Everything should work, but you better test :) corrected typo. 2000/12/14 Pixel * share/compssList: obsoleted by rpmsrate * share/rpmsrate: obsoletes compssList * share/compssUsers, install_steps.pm, install_steps_interactive.pm, Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm: move from compssList to rpmsrate * Newt/Newt.xs: cleanup (use of alloca to pass parameters) 2000/12/13 Pablo Saratxaga * share/po/it.po: updated Italian file 2000/12/12 dam's * netconnect.pm: typo + if firewall, don't display 'disable network' * standalone/draknet2: new version... still working on it * ChangeLog: commit * share/themes-mdk-Firewall.rc: added firewall theme * modules.pm: my fault, corrected renaud's patch incorporation * share/logo-mandrake-Firewall.xpm: new logo 2000/12/12 Franois Pons * share/list: added packdrake.pm as packdrake has been splited. * pkgs.pm: fixed versionCompare to always return number. added checking of version to select obsoletes on upgrade. 2000/12/11 Franois Pons * install_any.pm: Radeon uses 3D now. * lang.pm: fixed write_langs for upgrade. i18n sucking fixes. * Xconfigurator.pm: Radeon uses 3D hw accel theoritically now. 2000/12/09 Pablo Saratxaga * lang.pm: Added configuration of Vietnamese input server 2000/12/09 Pixel * standalone/adduserdrake: remove debugging code * install2.pm (selectInstallClass): give $clicked to selectInstallClass * interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to null in case of error on hidden entry cuz newt doesn't display null entries, disturbing * install_steps_interactive.pm (formatMountPartitions): the format partition dialog created at first use, so that it doesn't appear if no partitions are formatted. (selectInstallClass): ensure expert choice is kept if it was prechosen (selectInstallClass): if expert pre-chosen, ensure expert is kept * interactive_gtk.pm, install_steps.pm: small renicing 2000/12/08 Franois Pons * pkgs.pm: fixed bug in list of packages provided by another one. 2000/12/08 Pablo Saratxaga * share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po, share/po/az.po, share/po/tr.po: updated Brazilian file 2000/12/08 Pixel * install2.pm (main): warn if VERSION file doesn't exist (formatPartitions): call rotate_logs after mounting the partitions * mouse.pm (write_conf): fix to make make test_pms happy * install_steps.pm (exitInstall): save the report.bug in /root/report.bug * any.pm (rotate_logs): created, rotates ddebug.log and install.log in /root * ftp.pm (new): retry in case of ftp connection/login * commands.pm: report_bug: created, returns a string 2000/12/07 dam's * netconnect.pm: corrected ADSL connection choice. corrected typo 2000/12/06 dam's * install2.pm: erare humanum es firewall begins to infect the install :). new meta_class. * share/logo-mandrake-Firewall.xpm: aded logo for firewall * install_gtk.pm: corrected errors left pixmap centered if firewall improved the firewall theme. errare humanum es firewall infects the install. The logo is changed if firewall. 2000/12/06 Pixel * standalone/keyboarddrake: add possibility to use keyboarddrake non-interactive (aka give the keyboard as first parameter) * lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm, install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted. Now rpm uses %_install_langs in /etc/rpm/macros 2000/12/05 Franois Pons * pkgs.pm: final fixes to versionCompare to make sure no deadlock can occurs. * Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration. 2000/12/05 Pablo Saratxaga * share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po, share/po/es.po: updated several pofiles 2000/12/04 Franois Pons * install_steps_interactive.pm: use isCdNotEjectable. * common.pm: added function isCdNotEjectable. * share/Cards+: SiS620 card are said to be unsupported by XF4. * pkgs.pm: load only one hdlist in memory if CD is not ejectable (low memory). fixed compareVersion for deadlock. removed silly CODE print on deporder problems. * Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode. 2000/12/03 dam's * mouse.pm: incorporated cmodifications in the firewall branch * netconnect.pm: netconnect_new > netconnect.pm * netconnect_consts.pm: incorporated in the firewall branch. * standalone/draknet2: incoporated in the firewall branch * any_new.pm: any_new > any, so we remove it now. * netconnect_new.pm: netconnect_new > netconnect, so we remove it now. incorporated in the firewall branch * modules.pm: incorporated modifications to the firewall branch. Hope they won't break anything... 2000/12/02 dam's * share/po/az.po: correction in firewall incorporated * ChangeLog: first attempt ro build the firewall install * standalone/mousedrake: incorporated in the firewall branch * share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated in the firewall branch 2000/11/28 dam's * modules.pm: included reno's patches. Now should work without kudzu. branch to build the firewall install. * standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm, standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/isdn.xpm: Initial revision branch to build the firewall install. * partition_table_dos.pm, share/po/bg.po, share/po/sr.po, share/template.in/cdrom.kdelnk.in, share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c, Makefile, share/consolefonts/lat0-sun16, share/themes/DarkMarble-check_off.png, share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc, do_resize_fat, share/po/wa.po, share/po/is.po, share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm, class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm, install_interactive.pm, c/README, Xconfig.pm, share/themes.rc, share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc, share/themes-blueHeart.rc, pkgs.pm, keyboard.pm, share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po, standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm, share/step-green-click.xpm, partition_table_sun.pm, share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c, share/po/.cvsignore, share/ftin.xpm, standalone/draksec, resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm, Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm, share/themes/marble3d-button4.png, share/rpm-unselected.xpm, share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png, c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm, standalone/livedrake, share/diskdrake.rc, share/themes/DarkMarble-check_on.png, standalone/draknet, share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png, share/po/ro.po, share/list, share/po/cs.po, share/po/be.po, share/po/sp.po, share/step-orange-click.xpm, modparm.pm, share/step-green.xpm, share/rpm-base.xpm, share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po, share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm, share/Cards2CardsNames, Newt/Makefile.PL, share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po, share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po, standalone/icons/findf.xpm, share/po/lt.po, share/themes/mdk-check_off.png, fs.pm, c/.cvsignore, share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm, detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm, standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm, Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po, share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm, share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po, resize_fat/.cvsignore, install_steps_interactive.pm, share/themes/mdk-button4.png, live_install, standalone/draknet2, any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm, share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm, share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl, swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake, g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po, partition_table_mac.pm, standalone/mousedrake, devices.pm, share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po, share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm, share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po, Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc, share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c, share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm, perl2etags, share/po/Changelog, standalone/drakboot, resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc, share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po, share/MonitorsDB, share/template.in/Dos_.kdelnk.in, standalone/printerdrake, services.pm, share/kmap2bkmap, share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po, common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm, install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16, share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames, c/Makefile.PL, share/themes-mdk-Desktop.rc, share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm, share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw, share/po/sl.po, standalone/rpmdrake, share/makedev.sh, share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc, install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm, my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList, share/po/fr.po, share/themes/DarkMarble-button3_in.png, standalone/icons/ftin.xpm, share/modparm.lst, raid.pm, standalone/diskdrake, share/po/ko.po, share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop, share/po/ja.po, any.pm, share/isdndb.net, share/template.in/floppy.kdelnk.in, share/step-green-on.xpm, share/step-red-click.xpm, share/po/Makefile, help.pm, share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po, share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po, loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm, Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm, standalone/drakxservices, resize_fat/Makefile, fsedit.pm, interactive_stdio.pm, live_install2, resize_fat/directory.pm, share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot, share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po, share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm, share/themes/marble3d-check2.png, ftp.pm, c/md5.h, standalone/adduserdrake, share/themes/marble3d-button2.png, partition_table_raw.pm, share/template.in/zip.kdelnk.in, share/locales.tar.bz2, standalone/icons/fileopen.xpm, share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm, commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po, interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png, interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm, bootloader.pm, share/po/af.po: branch to build the firewall install. 2000/11/28 Franois Pons * install2.pm: change upgrade section for keyboard. * install_steps_gtk.pm: extended chooseSizeToInstall. * install_steps.pm: updated comment. * pkgs.pm: fixed misuse of map with values returing list which are indexed afterward. * install_any.pm: removed some more logs. * keyboard.pm: keep track of unknown keyboard (for upgrade) * install_steps_interactive.pm: modified def_mark to 59 (gl hw acceleration level) and upgrade use this level for newbies so. make sure a recommended upgrade get the minimum and a little more (80). choose default size according to a default mark (currently 49). 2000/11/27 dam's * netconnect_consts.pm: added isdn Gazel card 10b5 1151 2000/11/27 Pixel * partition_table.pm (@bad_types): list of the different type of extended partitions (important_types): remove @bad_types from important_types 2000/11/25 Pablo Saratxaga * share/po/ru.po: updated Russian file 2000/11/24 dam's * mouse.pm: doc + split * netconnect_new.pm: added depmod after having writed modules.conf * standalone/mousedrake: splited 2000/11/24 Franois Pons * pkgs.pm: avoid .la files for selection. * install_steps.pm: added missing portmap. 2000/11/23 dam's * standalone/draknet2: progressbar. 2000/11/23 Franois Pons * install_steps_interactive.pm, install_steps_gtk.pm: updated with structural change of pkgs. * install_any.pm: removed some ugly logs. updated with structural change of pkgs. * install_steps.pm: added tempory fix for initscripts %post. updated with structural change of pkgs. * pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk. removed ugly log on transaction. added special case to avoid counting kernels space when upgrading as these package are not upgraded (just installed). Memory usage optimization, change structure of storing package informations. lot of fork to make sure of freeing memory by perl (no free on used hashes or arrays usable by other than perl), now upgrade takes as much as install which takes at least 0.5Mb less than before. 2000/11/23 Guillaume Cottenceau * share/compssList: put all tina stuff to weight 0 2000/11/21 Franois Pons * Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files, keep wacom entries. * Xconfigurator.pm: upgrade for XF86Config, take care of resolution and depth wanted. * install_steps.pm: always try to get default from /etc/X11/XF86Config removing logs. * pkgs.pm: cosmetic changes for upgrade, removing some logs. * install_steps_interactive.pm: removed code to ask if take care of /etc/X11/XF86Config* files. added wait message during rebuild of rpm database as it takes some time. * Xconfigurator_new.pm: WARNING 2000/11/21 Pablo Saratxaga * share/po/az.po: updated Azeri file 2000/11/20 Franois Pons * pkgs.pm: clean up as today filelist is no more. use parsehdlist from rpmtools-2.1-3mdk or above instead of perl code from DrakX forking to simulate a filelist server. this increase performance by 100 to 150% on selection of packages to upgrade. * share/list: added parsehdlist. * c/stuff.xs.pm: removed logs. 2000/11/20 Pixel * share/Cards+: add radeon * install_steps_auto_install.pm (exitInstall): fix message * install_steps.pm (afterInstallPackages): moved the writeandclean_ldsoconf here * fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points 2000/11/17 Guillaume Cottenceau * install_any.pm: add openuniverse to the list of gl apps 2000/11/16 dam's * netconnect_new.pm: corrected isdn_get_{list, info} 2000/11/16 Franois Pons * share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-) * modules.pm: tempory version for current glibc, a lot of module have been removed due to problem of stage1 increase in size when compiled with glibc-2.2 and current modutils. * c/Makefile.PL: updated with rpmlib 4. * c/stuff.xs.pm: completed something that seems to work almost correctly at the first look with rpmlib 4. 2000/11/16 Guillaume Cottenceau * share/compssList: add netscape-german, thx to florin isdn4k-utils gets same weight as isdn4net, thx to Florin 2000/11/16 Pablo Saratxaga * share/po/no.po: updated Norwegian file * share/po/sk.po: updated Slovak file 2000/11/15 dam's * netconnect_new.pm: added isdn_get_list and isdn_get_info calls modules::write_conf to fill the modules.conf. * Xconfigurator_new.pm: added to fork frontends backends. Not operationnal at all for now. * modules.pm: when loading a new module, add an alias for it, even in standalone mode. 2000/11/15 Franois Pons * c/stuff.xs.pm: updated for rpm 4. * pkgs.pm: rpmdepOrder again (for new TAGp) 2000/11/15 Pixel * c/Makefile.PL: add librpmio * c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc (dev_t) 2000/11/14 dam's * netconnect_new.pm: better structure for the ethx-driver. added call to add_alias and write_conf * standalone/draknet2: updated 2000/11/14 Franois Pons * pkgs.pm: removed foreach (<... which are eating memory fork install on upgrade for searching trhough filelist, this saves about 20Mb of memory before rpmlib transaction are started so its is more than 2 times faster for upgrading a system, sorry it was effectively a machine two overloaded that makes the upgrade slower. make rpmlib not to check size as DrakX should do it. added special cases for selection of packages according to files, avoid all kde-i18n packages if their locales-$lang is not selected, avoid a -devel package if only one files is updated (typical for fixes on package by moving files around). deactivated rpmdepOrder as it should be done directly in depslist.ordered file. fixed obsoletes which never run correctly, even if almost no package are selected explicitely this way. added log during selection of packages to upgrade to keep a track of what DrakX is doing. * modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm, Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm, printer.pm, Xconfigurator.pm: removed foreach (<... which are eating memory 2000/11/14 Pablo Saratxaga * share/po/da.po: updated Danish file 2000/11/13 Guillaume Cottenceau * standalone/drakgw: Integrate Till's patches for better work with Cups. 2000/11/12 Pixel * standalone/mousedrake: fix for bug #1350 (mousedrake dies with: Undefined subroutine &mouse::serial_ports_names) * pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and .cz22 for .cz2) that makes for than one CD install breaks :-( 2000/11/11 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2000/11/10 dam's * standalone/draknet2: draknet2 : new version of draknet, post-install only, uses only libDrakX backend, beautyfull * netconnect_new.pm: completed adsl_conf_backend corrected conf_network_card_backend : return interface and module separately splitted pppconfig. 2000/11/10 Franois Pons * share/po/fr.po: typo fixing * printerdrake.pm: fixed wrong case for managing IP for remove CUPS server updated typo for remote CUPS server configuration dialog 2000/11/10 Pablo Saratxaga * share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files * share/po/wa.po, share/po/da.po: updated Danish and Walloon files 2000/11/10 Pixel * c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent section) 2000/11/09 dam's * netconnect.pm: added handling for 2 ethernet cards with the same module 2000/11/09 Franois Pons * share/po/fr.po: add some missing translation (mainly printer for CUPS remote config) * printer.pm: make sure to restart cups when cupsd.conf is modified. * printerdrake.pm: fixed modification of BrowsePoll on a existing file. 2000/11/08 dam's * netconnect_new.pm: updated 2000/11/08 Franois Pons * Xconfigurator.pm: make sure class discarding do not destroy result * pkgs.pm: added new function for selected or installed accessor on pkg make sure package already installed for oem are marked as selected, as some code refer to this state to perform some actions (install_urpmi) * install_steps.pm: fixed for urpmi again; * printerdrake.pm: add management of BrowsePoll : in /etc/cups/cupsd.conf * printer.pm: add minimal management of /etc/cups/cupsd.conf 2000/11/08 Guillaume Cottenceau * share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136) 2000/11/08 Pablo Saratxaga * share/po/es.po: updated Spanish file 2000/11/07 dam's * mouse.pm: now there are 8 ttyS* available for configuration. Used for internal modem configuration that uses ttyS* > 3 * netconnect_new.pm: ttyS0 -> ttyS7 available for configuration some doc 2000/11/07 Franois Pons * Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128). * install_steps_interactive.pm: use of install_any::boot_medium to avoid listing medium used for boot * install_any.pm: use of $boot_medium where the boot medium is used (default 1) 2000/11/07 Guillaume Cottenceau * share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to 2000/11/07 Pixel * install2.pm (main): in oem, configureX automatic (main): $::oem is now global :-( (needed in install_steps.pm) * install_steps.pm (afterInstallPackages): give medium 'cdrom' to install_urpmi in case of $::oem 2000/11/06 dam's * netconnect_new.pm: backend/frontend fork complete * any_new.pm: load_thiskind changed to load_thiskind_backend, the wait function is passed by argument * network.pm: configureNetwork2 commented. 2000/11/06 Franois Pons * pkgs.pm: created function for examining already installed package on install (oem). * install2.pm: add a flag to allow by default formating / * install_steps.pm: conditionnal format of / and use already installed packages if any on install. 2000/11/06 Guillaume Cottenceau * share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius 2000/11/06 Pablo Saratxaga * share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to ascii transliteration for them * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds 2000/11/06 Pixel * install2.pm (formatPartitions): formatMountPartitions done even in upgrade (main): set $o->{partitioning}{use_existing_root} in oem * install_steps.pm (doPartitionDisksAfter): remove the mount_all which is plain dumb (doPartitionDisksAfter): fs::mount_all moved here (doPartitionDisks): use $o->{partitioning}{use_existing_root} * install_any.pm (use_root_part): fs::mount_all really removed (use_root_part): fs::mount_all removed * install_steps_interactive.pm (choosePartitionsToFormat): don't propose already mounted partitions (installCrypto): nicer layout 2000/11/05 dam's * mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse' 2000/11/05 Guillaume Cottenceau * share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette 2000/11/01 Pablo Saratxaga * share/po/eo.po: updated Esperanto file 2000/10/31 dam's * netconnect_new.pm: continuing forking frontend - backend. adsl ist nearly finished * any_new.pm: added this file to fork frontends and backends in any.pm 2000/10/30 Guillaume Cottenceau * share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux tu damsera 2000/10/30 Pablo Saratxaga * share/po/wa.po: updated Walloon file * share/keyboards.tar.bz2: updated keyboards 2000/10/30 Pixel * lang.pm (load_po): backslash @ in po strings, otherwise the eval fails 2000/10/28 dam's * netconnect_new.pm: new version of draknet. Splited frontends - backends 2000/10/28 Pablo Saratxaga * share/po/tr.po: updated Turkish file 2000/10/27 Franois Pons * install_any.pm: remove the noising rpm output command line when loging installed rpm size (only usefull for live_update and just for conveniance). * pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP hack) before reading a compssUsers file. * live_install: add VERSION in list of file that have to be symlinked. * common.pm: list_skels returns list of existing directory and writeable. * live_install2: Make sure to remove font path in /tmp/drakx before exiting. 2000/10/26 Pablo Saratxaga * share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and Turkish files 2000/10/24 Guillaume Cottenceau * share/compssList: fortune-mod gets 10/0/10 on request from egil 2000/10/24 Pablo Saratxaga * share/po/pl.po: updated Polish file 2000/10/23 Pablo Saratxaga * share/po/ca.po: updated Catalan file 2000/10/23 Pixel * install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns to please jl :) * detect_devices.pm (floppies, probeall): add require "modules" as it should be * install_interactive.pm (partitionWizardSolutions): add "require resize_fat::main" as it should be 2000/10/22 Guillaume Cottenceau * share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has 74/0/74 2000/10/21 Pablo Saratxaga * share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish and Ukrainian files 2000/10/20 fabman * share/po/es.po: updated 2000/10/20 Guillaume Cottenceau * share/compssList: ntp to -1/-1/-1 2000/10/19 Guillaume Cottenceau * share/compssList: put all packages requiring kde1-compat to 0 except kisdn-free aumix now gets a high weight (79) because it's required to save the mixer settings at shutdown 2000/10/19 Pixel * share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212) 2000/10/19 tlb * share/po/da.po: 100%, Troels Liebe Bentsen. 2000/10/18 Pablo Saratxaga * share/po/az.po: Added AZeri file * share/po/no.po: updated Norwegian file 2000/10/17 dam's * interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused code in ineractive_gtk added some isdn card in pcitable corrected typos, and made ISA isdn work 2000/10/17 Pablo Saratxaga * share/po/lv.po: updated Latvian file 2000/10/16 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace setting 2000/10/16 Pixel * detect_devices.pm (cdroms): fix the setting of scdX for ide burners * share/compssList: sympa is -1 except for server * keyboard.pm (write): small pixelization (neater now) * install_steps.pm (installPackages): don't run ldconfig in g_auto_install 2000/10/15 Pablo Saratxaga * share/po/nl.po: updated Dutch file 2000/10/14 Pablo Saratxaga * lang.pm, keyboard.pm: small fix for Swedish locale * share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po, share/po/wa.po, share/po/de.po: updated Bulgarian file 2000/10/13 Franois Pons * partition_table_empty.pm: empty partition table as assumed only if the MBR is really composed of only null chars. 2000/10/13 Guillaume Cottenceau * share/compssList: added viavoicemenu 2000/10/12 Pixel * install_steps.pm (ask_mntpoint_s): dqs 2000/10/11 Pixel * .cvsignore: ignore flog files * install2.pm (main): test * ChangeLog: qsdqsd * install_steps_interactive.pm: * (selectKeyboard): set default $o->{langs} to $o->{lang} 2000/10/10 Guillaume Cottenceau * standalone/drakgw, ChangeLog: make only one call to urpmi in order to install all the needed rpm's 2000/10/10 Pablo Saratxaga * share/po/no.po, share/po/es.po: updated Norwegian file * share/po/pl.po: updated Polish file * share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file 2000/10/10 tlb * share/po/da.po: 99%. 2000-10-10 Guillaume Cottenceau * standalone/drakgw: make only one call to urpmi in order to install all the needed rpm's 2000-10-10 DrakX * snapshot uploaded 2000-10-10 Pixel * install2.pm: increase $::VERSION 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Guillaume Cottenceau * share/po/fr.po: update after Dam's new messages in netconnect 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_any.pm (kdeicons_postinstall): remove the handling of doc desktop icons. see dadou 2000-10-09 Guillaume Cottenceau * share/compssUsers: new list (with icons) * share/list: add icons for compssUsers 2000-10-09 dam's * standalone/draknet: added wait message 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * share/themes-*.rc: change the fg[INSENSITIVE] entry 2000-10-09 Franois Pons * install_any.pm: added tuxracer in OpenGL games to install if an accelerated card has been found. 2000-10-09 dam's * netconnect.pm (main): asking connection after writing start/stop scripts. (adsl_conf): if during install, don't use chkconfig, make the links directly for the adsl init script. 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_steps.pm (afterInstallPackages): UserView in kdmrc is now true by default. So put false if security >= 3 instead of removing it. 2000-10-09 Franois Pons * any.pm: default speed of modem set to 115200. * fs.pm: fixed format of RAID partition. * install_interactive.pm: take into account RAID partitions for searching / partition. 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_steps.pm (selectKeyboard): don't assume $o->{langs} is set (selectLanguage): don't set $o->{langs} (so that you can go back and it works) * common.pm (round_up, round_down): ensure number is an integer * install_steps_interactive.pm (chooseGroups): take into account the min_level to compute the size 2000-10-08 Pixel * install_steps_interactive.pm (choosePackages): move the computing of max_size before calling chooseGroups (not the one for desktop meta_class) (chooseGroups): compute the size of Miscellaneous 2000-10-07 DrakX * snapshot uploaded 2000-10-07 Pixel * share/compssList: don't install locales-* even in 'all' install (those files are usefull if RPM_INSTALL_LANG doesn't include that lang) 2000-10-07 DrakX * snapshot uploaded 2000-10-07 Pixel * pkgs.pm (install): log the gonna be installed packages (-> be able to track not installed packages that should have been installed) 2000-10-06 DrakX * snapshot uploaded 2000-10-06 dam's * netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf (intro): connection detection improved : now use "ifconfig | grep interface" (pppConfig): corrected cnx_up/down 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Pixel * install_steps.pm (afterInstallPackages): don't fail if kdeglobals file is not there * share/compssUsers.desktop: fix icons * detect_devices.pm (cdroms): fix for scsi cdrom drives * pci_probing/pcitable: put cs46xx instead of snd-card-cs461x (dixit jeff) * diskdrake.pm (Resize): comment ext2&reiserfs resizing for the moment 2000-10-06 Frederic Lepied * Xconfigurator.pm (write_XF86Config): added mode of wacom devices 2000-10-06 dam's * netconnect.pm (ask_connect_now): connection is now tested. 2000-10-06 Franois Pons * install_steps_interactive.pm, install_steps_gtk.pm: updated license. * Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by DRI, use only Mesa with Utah GLX, fixed autologin for avoiding drakres and no wm available, moved Riva128 card from experimental to stable, fixed presentations of text. * pci_probing/pcitable: fixed Cirrus Logic sound card. 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Franois Pons * install2.pm: fixed bad call to hasUsb... * share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep 530, 620 and 6326 with XFree 4.0.1. 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Pixel * share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore * install_steps.pm (afterInstallPackages): put the Charset in kdeglobals, otherwise kde uses charset iso8859-1 :( * lang.pm (charset): created * common.pm (update_userkderc): fix it, change the argument passing 2000-10-05 Pixel * share/compssList: raise kde-i18n-*, should be installed whenever kdebase is installed * pci_probing/pcitable: integrate patch from viet (concerns sym53c8xx cards) * share/compssUsers: use "documentation" as the database icon * install_steps_interactive.pm (chooseGroups): fix to accept icons not in the format "*_section.xpm" * install2.pm (miscellaneous): put yes/no in sysconfig/usb entries 2000-10-05 dam's * netconnect.pm (adsl_conf): updated pppoe conf. (main): added $netc->{minus_one} to avoid to count dhcp configured eth when asking to share the connection. (adsl-pppoe): improvement. Should work now. (miscellaneous): corrected chmod 755 to 744 for connections scripts * netconnect.pm (main): network is stopped then started, instead of restarted. 2000-10-05 Franois Pons * live_install: added icons (this fixes the yellow on white tooltips problem). * install_any.pm: added ghostscript-utils in the list of packages to copy when changing CD. * printerdrake.pm: install ghostscript-utils if a lexmark printer is selected on cups. 2000-10-05 DrakX * snapshot uploaded 2000-10-05 Pixel * install_any.pm (loadO): look for auto_inst.cfg in /, not in /Mandrake/base 2000-10-05 Franois Pons * netconnect.pm: fixed syntax error. * share/po/i18n_compssUsers: simplified version and fixed dependancies to pkgs.pm (for building drakxtools). 2000-10-04 Franois Pons * install_gtk.pm: removed 80 pixel on height for live upgrade. * install_steps.pm: do not set keyboard when live upgrade after setting the language. * install_steps_gtk.pm: fixed the trying to start a X server on live. 2000-10-04 Pixel * share/po/i18n_compssUsers: fake module ``c'' so that no need to build DrakX to use i18n_compssUsers * install_steps_interactive.pm (selectLanguage): update license * install_steps_gtk.pm (installPackages): add second license for shitty soft (commercial one) 2000-10-04 dam's * draknet (netconnect.pm and network.pm): various translations corrected, network is restarted, buttons connect/disconnect debugged. 2000-10-04 DrakX * snapshot uploaded 2000-10-04 Pixel * Xconfigurator.pm (main): kill prefdm instead of autologin * install_any.pm (find_root_parts): don't use suggest_mount_points, it couldn't do what we wanted (guess_mount_point): created, contains the common stuff between suggest_mount_points and find_root_parts 2000-10-04 Guillaume Cottenceau * standalone/drakgw: fix some failing/untranslated i18n messages * share/po/fr.po: write translations according to drakgw 2000-10-04 Franois Pons * Xconfigurator.pm: removed bad card for 3D Rage Pro. * install_any.pm: removed Aurora for SiS card, add more case for detecting right cdrom for live upgrade, fixed wrong list of packages for laptops. * c/stuff.xs.pm: added time interval of 200ms between update of progression bar of install, make sure the last step is seen. 2000-10-04 DrakX * snapshot uploaded 2000-10-04 Pixel * modules.pm (when_load): stricter regexp for $type is scsi or not (so that scsi_mod with is scsi_raw doesn't get an alias scsi_hostadapter) * detect_devices.pm (isLS120Drive): extend the regexp to include "Caleb Technology - 144MB FDD UHD Floppy" * detect_devices.pm (burners, IDEburners): reworked, renamed, now works! * c/stuff.xs.pm (isBurner): created * modules.pm (load_ide): make sure ide-cd is loaded! * install_steps_interactive.pm (chooseGroups): the label and help are now translated (at least will be), so use the translations 2000-10-03 Pixel * share/po/Makefile (DrakX.pot): added the to-be-translated from compssUsers * share/po/i18n_compssUsers: read the compssUsers's and output the to-be-translated in po format * log.pm (l): log to STDERR instead of STDOUT * install_any.pm (loadO): use first floppy drive available (won't help much though, as stage1 doesn't follow this...) 2000-10-03 DrakX * snapshot uploaded 2000-10-03 Pixel * Xconfigurator.pm (autologin): don't propose autologin in security > 3 * common.pm (availableRamMB): HACK HACK if i810 and memsize, returns 127 * bootloader.pm (suggest): don't use grub if more than 800MB 2000-10-04 Guillaume Cottenceau * share/po/validate.pl: create this tool * share/po/fr.po: fix many typos * share/po/fr.po: make compssUsers translation 2000-10-03 Franois Pons * Xconfigurator_consts.pm: changed resolution allocation. * fs.pm: removed no more used log. * install2.pm: add exit button if live upgrade. * install_any.pm: increased minimal available size to 65Mb. * install_steps.pm, standalone/printerdrake: fixed cups to CUPS for mode. * printerdrake.pm: fixed not_edit for lpr mode of printerdrake. * share/Cards+: fixed Savage2000 entry. 2000-10-03 DrakX * snapshot uploaded 2000-10-03 Franois Pons * Xconfigurator.pm: updated bad card with Rage Mobility card. * live_install: added test of root user, abort if not root. 2000-10-03 Guillaume Cottenceau * share/po/fr.po: fixed bug #518 and fixed other misc errors 2000-10-03 DrakX * snapshot uploaded 2000-10-02 Franois Pons * diskdrake.pm (Resize): fix to make ext2resizing work a little better * install_steps.pm: fixed installation of urpmi configuration. * detect_devices.pm: updated comment about UltraDMA66/100 management. * modules.pm: updated comment about UltraDMA66/100 management. * diskdrake.pm: adding a cylinder for the minimum of the resize and if there is nothing to do for resize, simply return. * install_any.pm: added missing require pkgs. 2000-10-02 Pixel * many files: remove many lnx4win special cases which are not needed anymore * any.pm (addUsers): grpuser output goes to Mr Dave * bootloader.pm (install_lilo): change the default color of menu * install_steps_interactive.pm (choosePackages): add 300MB choice in desktop * mouse.pm (fullnames): fix i18n fix * install_steps.pm (miscellaneous): don't add ide2=0x... for ultra66 (otherwise chmouel is not happy, so is hdc being hde) * Xconfigurator.pm (main): add handling of icewm logout * c/stuff.xs.pm: changed the stepping of "Progressing installing package" 2000-10-02 dam's * netconnect.pm (main): infos are written only when needed. * netconnect.pm (intro): connection checking now works. 2000-10-02 Chmouel Boudjnah * pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like jeff request. 2000-09-30 DrakX * snapshot uploaded 2000-09-30 dam's * netconnect.pm: a LOT of bugs fixed. draknet is now completely brok^H^H^H^Hfrozen. 2000-09-29 DrakX * snapshot uploaded 2000-09-29 dam's * netconnect.pm (adsl_conf): dhcp should better work. * network.pm (configureNetwork): remove connection script if a gateway is given. * common.pm (setVarsInShMode): created. chmod the file with permissions passed in argument. 2000-09-29 Franois Pons * modules.pm (load): fixed when standalone, use modprobe. * pkgs.pm: added preference for wu-ftpd. * detect_devices.pm: added code to proble USB printer. * printer.pm: fixed missing PRINTER=yes on CUPS configuration for USB printer. * install_steps.pm: removed possibilty to add an user in urpmi group (jloup). * install_steps_interactive.pm: log if CD not ejectable. 2000-09-29 Guillaume Cottenceau * share/compssList: sync with latest packages * install_steps_interactive.pm (selectLanguage($)): s/42/43/ in MandrakeSoft physical address 2000-09-29 DrakX * snapshot uploaded 2000-09-29 dam's * netconnect.pm (intro): detection of internet configuration/connexion state. * network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf 2000-09-28 Pixel * modules.pm (load_thiskind): add read_already_loaded cuz of pcmcia 2000-09-28 Guillaume Cottenceau * share/compssList: add nasty DrakSync and DrakProfile with 50 0 50 2000-09-28 DrakX * snapshot uploaded 2000-09-28 Pixel * install_steps_interactive.pm (choosePackages): the minimum is 25 in beginner, not 10 * pkgs.pm (readCompssUsers): fix reading description * install_steps.pm (afterInstallPackages): remove the code to handle RPM-GPG-KEYS 2000-09-28 dam's * interactive_gtk.pm (ask_from_list_with_helpW): no more theme parsing, no more draknet.rc * netconnect.pm (read_net_conf): no adsl tree anymore. * netconnect.pm: drakgw called if enough card are installed. * netconnect.pm: minor bugs correction. 2000-09-28 Franois Pons * Makefile.config: added livedrake for drakxtools. * diskdrake.pm: use corrected partition size when resizing a dos partition (like the others). * install_any.pm: no more pnm2ppa packages and others in package to copy when changing CD. * live_install: exec live_install2 instead. * live_install2: contains post live upgrade stuff now. * printerdrake.pm: protect set_help() usage by if $::isInstall, removed reference to package pnm2ppa and others. * standalone/livedrake: initial release for drakxtools. 2000-09-28 DrakX * snapshot uploaded 2000-09-28 Pixel * install_interactive.pm (partitionWizardSolutions): fix the limit cases for lnx4win * share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation 2000-09-27 Pixel * install_steps_interactive.pm (choosePackages): set $size2install to $availableC in desktop install, as it should be * install2.pm (choosePackages): remove the code for removing kdesu in high security... * install_steps_interactive.pm (createBootdisk): format more nicely the text * install_steps_gtk.pm (installPackages): add 10 seconds to have a better estimation * install_steps_interactive.pm (chooseGroups): now returns a boolean (choosePackages): use chooseGroups return value to redo choosePackages * install_steps_gtk.pm (selectMouse): if mouse type is none, then don't test! * Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom * various: replace all Rescue by Update * pkgs.pm (readCompssUsers): read description for groups * install_steps_interactive.pm (chooseGroups): add description for groups 2000-09-27 Guillaume Cottenceau * share/compssUsers.desktop: added description * share/compssUsers: added description * share/compssUsers.desktop: added icon support, reordered, renamed * share/compssUsers: reordered, renamed 2000-09-27 DrakX * snapshot uploaded 2000-09-27 Pixel * install_steps_interactive.pm (selectLanguage): intregrate license again * pkgs.pm (readCompssUsers): reads compssUsers.meta_class * diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/'' (as should be) * install_steps_gtk.pm (selectInstallClass1): if @$l (list of install classes) contains only one element, call install_steps_interactive::selectInstallClass1 * install_steps_interactive.pm (choosePartitionsToFormat): fix for "no partitions selected to format" * my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie 2000-09-27 Guillaume Cottenceau * share/compssList: more for gnupg, -11 for sucking things, changed compss-groups to be less than 70. * share/compssUsers: modified compssUsers with Warly, added compssUsers.desktop, simplified for KD (now uses Graphical Desktop/KDE instead of listing all relevant packages) 2000-09-27 dam's * netconnect.pm (get_info_adsl_providers, read_adsl_providers): Created. adsl provider tree. (set_net_conf): better informations storing. * my_gtk.pm (new): windows are always centered if standalone. 2000-09-27 Franois Pons * Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed 3D hw acceleration for i815 (VideoRam). prefer XF3 for all NeoMagic cards. * install_gtk.pm: re-enabled themes on live upgrade but without modifying background image. * install_steps_gtk.pm: fixed missing help. * live_install: lot of fixes to enable DrakX font, keep upgraded system clean (libperl.so which allows graphical login). * pkgs.pm: added function allowedToUpgrade to filter kernel package. 2000-09-27 DrakX * snapshot uploaded 2000-09-27 Pixel * install_steps_interactive.pm (configureX): if `clicked' don't go to auto mode * Xconfigurator.pm (monitorConfiguration): fix the translated 'Generic' which is not so (and must not be so) anymore 2000-09-26 Pixel * pkgs.pm: remove all Unskip code * my_gtk.pm (_create_window): add shortcut alt-e to switch to expert * Xconfigurator.pm (resolutionsConfiguration): fix for setting legal resolution * install_steps_interactive.pm (selectLanguage): use formatAlaTeX on the license 2000-09-26 Franois Pons * fs.pm: added mounting of swap partition when mounting them all (this can help :-) * pkgs.pm: fixed correction size code to make (really) a true bijection between corrected and rpm size. 2000-09-26 DrakX * snapshot uploaded 2000-09-26 Pixel * install_steps_interactive.pm (selectLanguage): integrate the license (temporary one) * modules.pm (write_conf): fix the /etc/modules generation * interactive_gtk.pm (ask_many_from_listW): if more than 5 entries in icon format, use scrollbar. In non-icon format, use scrollbar for more than 11 entries. * commands.pm (bug): add ddcxinfos * pci_probing/pcitable: replace tulip by de4x5 for 2104x cards 2000-09-26 Franois Pons * Xconfigurator.pm: added more 3D Rage Pro card for 3D acceleration with Utah-GLX (Rage Mobility, Rage XC/XL), modified identification for checking acceleration. * install_any.pm: added automatic installation (up 60) for OpenGL games if a graphic card MAY BE accelerated. * live_install: fixed perl idioms in pure shell script and added packdrake symlink if not already installed. * share/compssList: changed level to -1 for all needing 3D hw acceleration packages. 2000-09-26 dam's * network.pm (write_resolv_conf): write temp dns line to be used with new initscripts package. Use to set dns live. 2000-09-26 DrakX * snapshot uploaded 2000-09-26 Pixel * mouse.pm (read): catch exception if fullname2mouse fails (eg: old FULLNAME format) 2000-09-25 Pixel * share/MonitorsDB: merge with latest redhat MonitorsDB * pci_probing/pcitable: major merge with latest redhat pcitable * share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to "Rage 128", added "Rage 128 Mobility" * install_any.pm (getAvailableSpace): keep 10% of free space on big partitions * Xconfigurator.pm (readMonitorsDB): don't translate Generic (otherwise, only a part is translated, see MonitorsDB for the non-translated part) * interactive.pm (ask_many_from_list): fix sorting * install_gtk.pm (test_mouse): smaller box to fit in 640x480 * install_steps.pm (afterInstallPackages, beforeInstallPackages): RPM-GPG-KEYS is copied before installing packages * pkgs.pm (readCompssUsers): handle icons in compssUsers * common.pm (truncate_list): ensure the list is not too big * install_steps_gtk.pm (choosePackagesTree): restrict the list to 20 elements if it is too big (use truncate_list) 2000-09-25 Franois Pons * bootloader.pm: add Video mode for entry. * fs.pm: updated for live upgrade. * install2.pm: dropped unuseful steps filtering. * install_any.pm: fixed wrong Device3Dfx package name and clean postinstall rpms directory on upgrade before filling it. * install_gtk.pm: removed window restrictions of live upgrade. * install_steps.pm: fixed initrd symlink following in case of upgrade. * install_steps_gtk.pm, install_steps_interactive.pm: keep always upgrade on live upgrade. * modules.pm: may fixed pcmcia lost driver (typically on network). * pkgs.pm: fixed (uggly?) usage of floating perl data on perl script :-) * printer.pm: back to "Generic PostScript" for default printer (jloup). * printerdrake.pm: make sure an expert can choose among available devices. 2000-09-25 dam's * network.pm (write_resolv_conf): write '# ppp temp entry adsl' in /etc/resolv.conf if needed. * netconnect.pm : adsl connection does'nt need any dns anymore. * netconnect.pm (read_net_conf): created. draknet now stores and reload the config. * netconnect.pm (main): if the user is french and uses french keyboard, don't ask his country. 2000-09-25 Pixel * modules.pm: added 8139too * share/Cards+: GeForce2 DDR is handled by driver "nv" * Xconfigurator.pm (main): in killall X for Xdrakres, also killall kdm/xdm/gdm/autologin :) 2000-09-25 DrakX * snapshot uploaded 2000-09-25 dam's * network.pm (configureNetwork): Warn user if he already configured the interface. 2000-09-24 Pixel * modules.pm (mergein_conf): created. call read_conf, fills %modules::conf and set $modules::scsi 2000-09-24 Guillaume Cottenceau * standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit 2000-09-24 DrakX * snapshot uploaded 2000-09-24 Pixel * commands.pm (bug): use first floppy drive instead of fd0 hard coded (nice for LS120's) * install_steps_gtk.pm (selectMouse): if device changed, do the test * standalone/mousedrake: fix for serial mice * install_steps_interactive.pm (selectMouse): fix for serial mice 2000-09-23 dam's * netconnect.pm (conf_network_card): now displays the modules of detected ethernet cards. 2000-09-22 dam's * netconnect.pm (main): calls drakegw. * netconnect.pm (get_net_device): fixed 2000-09-22 Guillaume Cottenceau * standalone/drakgw: - added logs - added verbose mode - fixed wrong stopping of named in other languages than english * netconnect.pm (get_net_device): try to fix it.. 2000-09-22 Pixel * install_steps_interactive.pm (selectKeyboard, choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list (): * interactive.pm (ask_many_from_list): now only ask_many_from_list exists, obsoleting ask_many_from_list_ref and ask_many_from_list_with_help. More flexible and nicer * interactive_newt.pm (ask_many_from_listW): adapted to new calling type * interactive_gtk.pm (ask_many_from_listW): adapted to new calling type, handle 'shadow' and 'icon2f' 2000-09-22 Pixel * install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win} * Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for i810 (testFinalConfig): i810 is a verybad_card, aka can't test anything on it :-( (main): fork to background and stay there while waiting for the WM to exit (testFinalConfig): update the backgroung image path * interactive_gtk.pm (exit): flush X before leaving (otherwise the mousecursor is not restored) * run_program.pm (rooted): don't redirect the stdout and stderr to ddebug.log if not $::isInstall * log.pm (l): log on stdout/stderr if !isInstall and !isStandalone * modules.pm (load_raw): redirect stderr to tty5 * install2.pm (main): set variable $::isInstall 2000-09-22 DrakX * snapshot uploaded 2000-09-22 Guillaume Cottenceau * standalone/drakgw: now includes information from netconnect to ignore the interface used for Internet connection 2000-09-22 dam's * install_steps_gtk.pm (selectInstallClass1): pixel's typo. * netconnect.pm (get_net_device): added get_net_device to know which interface has been used to configure the internet connection. (conf_network_card): ask to restart network if dhcp too. (main): enable dialing when modem. * network.pm (configureNetworkIntf): changed label to warn people about already configured eth cards. 2000-09-22 Franois Pons * install_gtk.pm: added Desktop themes. * share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png: initial release. * install2.pm: moved back to all steps for live upgrade. * install_gtk.pm: select right logo if desktop. * install_steps_interactive, install_steps_gtk.pm: avoid asking if upgrade for a live upgrade. 2000-09-22 Pixel * install_steps.pm: add some call to log_sizes to log the installed size * install_steps_gtk.pm (installPackages): beep before changeMedium 2000-09-21 Pixel * interactive.pm (ask_from_listf): try to call the f translation function on the default value with the index * install_steps.pm (afterInstallPackages): make the gpg code work, changed the call to "gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS" * detect_devices.pm: cleanup and removed unused code 2000-09-21 Guillaume Cottenceau * detect_devices.pm (getNet()): really remove plip in standalone 2000-09-21 Franois Pons * install_steps.pm, netconnect.pm: changed NETWORKING reference from false to no. * printer.pm: changed timeout from 30 to 60. * printerdrake.pm: added wait message when waiting for cups to start. * pci_probing/pcitable: added erwan VIA Rhine board. * network.pm: added DHCP_HOSTNAME reference. 2000-09-21 DrakX * snapshot uploaded 2000-09-21 Pixel * standalone/keyboarddrake: fix for XF4 * Xconfigurator.pm (write_XF86Config): comment the omit xfree86-dga * install_steps.pm (afterInstallPackages): configure GPG public keyring with mandrake key * standalone/mousedrake: updated/fixed for new mouse handling * install2.pm (main): update for handling oem installs * many files: relGetFile cleanup, updated calls to getFile and getAndSaveFile accordingly * Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg * detect_devices.pm (@netdevices): plip removed in standalone, otherwise plip is always there (because of kmod) * install_steps_interactive.pm (choosePartitionsToFormat): replace the die "cancel" by die "already displayed", so that no error is displayed. * pci_probing/pcitable: replace some rtl8139 by 8139too, added cards DELTA8139 and ADDTRON8139 (for jeff) * Xconfigurator.pm (show_info): also show the colordepth and resolution. don't show server if none, show XF4 driver if there's one. (main): change the "Forget the changes" to "Keep the changes?" with displaying the current configuration. 2000-09-21 Franois Pons * printer.pm: changed "PostScript" ppd default description to "Raw queue (no filtering)", asked by Till. * Xconfigurator.pm: add log of what user select for 3D hw acceleration. * share/compssList: changed XFree86-glide-module to -2 because the level is the same for XFree86-Glide* which may have multiple different version installed due to dependancies of the first one. 2000-09-21 dam's * netconnect.pm (conf_network_card): added check when dhcp. Cable connection should now work. 2000-09-21 DrakX * snapshot uploaded 2000-09-21 Pixel * install_steps_interactive.pm (exitInstall): call $o->exit if "Some steps are not completed" 2000-09-20 Pixel * bootloader.pm (install_loadlin_config_sys, install_loadlin_desktop): extracted from install_loadlin, do not call them anymore (remove it?) (suggest): put grub in lnx4win install * common.pm (availableRamMB): fixed (round to a multiple of 4) 2000-09-20 dam's * netconnect.pm (get_info_isdn_providers & read_isdn_providers): read file in /usr/share and $prefix/usr/share (isdn_write_config): corrected file to be sh compliant. (isdn_write_config): added default route settings for isdn. 2000-09-20 DrakX * snapshot uploaded 2000-09-20 Pixel * pci_probing/pcitable: replace es1371 by snd-card-ens1371 2000-09-20 dam's * Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 2000-09-20 Guillaume Cottenceau * standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume * standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 2000-09-20 dam's * standalone/draknet: used new package install function. 2000-09-20 Pixel * detect_devices.pm (isFloppyOrHD): detects wether a device is a floppy or not based on its size (for scsi floppy) * Xconfigurator.pm (testFinalConfig): check if "server" OR "driver" field is set (otherwise XF4 only card won't pass) * bootloader.pm (suggest): fix for ``installing the last cooker from kenobi:/I on an smp machine i don't get anymore an entry for linux-up'' (c chmouel) 2000-09-20 dam's * netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0]) 2000-09-20 DrakX * snapshot uploaded 2000-09-19 Pixel * modules.pm (get_pcmcia_devices): fix (especially, now ethernet should be detected) * lang.pm (get_langs): created, gives rpm install langs * install_any.pm (setPackages): give langs::get_langs() to readCompssList * pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given $langs instead. This fixes the RPM_INSTALL_LANG=all install. 2000-09-19 Pablo Saratxaga * netconnect.pm: make dhcp-client, pump and such not translatable. Those are program names and should therefore not be translated, that only confuses translators 2000-09-19 dam's * Xconfigurator.pm (autologin): corrected @users definition and passwd cat. 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * many files: changed some access to get_root to get_root_ * install_steps_interactive.pm (choosePackages): added code for desktop meta_class install type * install_steps_gtk.pm (selectMouse): cleanup, give parameter emulate3buttons to setMouseLive * c/stuff.xs.pm (setMouseLive): add argument emulate3buttons 2000-09-19 Guillaume Cottenceau * interactive*.pm: changed `suspend' and `resume' to behave as expected, added `enter_console' and `leave_console' 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by META_CLASS * Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false result (not enough VideoRam), also remove the found resolutions * Xconfigurator.pm (main): remove the automatic searching of resolutions * Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the automatic searching of resolutions. * mouse.pm (fullnames): changed the `_' in `[' before Other (nicer, uh?) * install2.pm (selectMouse): changed clicked to !first_time 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * Xconfigurator.pm (testFinalConfig): remove the bloody prototype 2000-09-19 DrakX * snapshot uploaded 2000-09-18 Dam's * Xconfigurator (autologin): do it eve, if newbie. Autologin is now in separated function. 2000-09-18 Pixel * Xconfigurator.pm (testFinalConfig): don't skip the test in auto if called via "Test again" * Xconfigurator.pm (resolutionsConfiguration): ensure all depth are bounded * bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is classic and no-fb * fsedit.pm (check_mntpoint): add a check for /etc /lib... which must not be mount points. Also check that /home, /tmp and /usr are on trueFS * interactive.pm (ask_from_entries_ref): add bounding of "val" in case of type "range". die if min > max. 2000-09-18 DrakX * snapshot uploaded 2000-09-18 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): nicer partition/device display * partition_table_raw.pm (zero_MBR): add on the fly require of the good partition_table_$type * detect_devices.pm (cdroms): fix (yet again) the scd$nb device assignment to ide burners * install_steps.pm (afterInstallPackages): comment out a part of the icons mess messing * Xconfigurator.pm (cardConfiguration): move Unlisted to Other/Unlisted * share/CardsNames: updated (for Voodoo5) * install_steps_gtk.pm (selectMouse): fix the test to know wether the guy has changed the mouse type (to know wether to test the mouse or not) * install_steps_interactive.pm (selectLanguage): add the license * install_steps_interactive.pm (choosePackages): have the "Recommended" size be the default (in the choice Minimum/Recommanded/Complete) * diskdrake.pm (Type): fix a typo * install_steps.pm (doPartitionDisksAfter): mark partition as mounted 2000-09-17 DrakX * snapshot uploaded 2000-09-17 Pixel * install/pcmcia_config.patch: cleaned * diskdrake.pm (Create, Type): have type field not_editable * tools/make_mdkinst_stage2: use TMPDIR if available 2000-09-16 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): move the setting of toFormat before asking for bad blocks, seems to fix things?? weird :-/ * network.pm (miscellaneousNetwork): fix the setting of focus on error (tx2Thomas Poindessous :) * install_steps_interactive.pm (configurePrinter): changed "Cancel" to "None" (for Thomas Poindessous :) * printer.pm (poll_ppd_base): max polling time raised from 10s to 30s (for Till) * install_steps.pm (ask_mntpoint_s): don't force partition type to be ext2 (at least if it's a known fs) (for Warly) 2000-09-15 DrakX * snapshot uploaded 2000-09-15 Pixel * install_steps_gtk.pm (set_help): save the help message displayed in $o->{current_help} * install_gtk.pm (create_big_help): display $o->{current_help} * mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice. * install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm * install2.pm (selectMouse): adapted for mouse::read now returning an hash ref * detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in one function (now takes the device in the parameter) * interactive.pm (ask_from_treelistf): added (just like ask_from_listf, but with a tree) * Xconfigurator.pm: the reference is now nbuttons to know wether to put Emulate3Buttons or ZAxisMapping. * Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on Banshee too. * Xconfig.pm: guess nbuttons based on Emulate3Buttons and ZAxisMapping. * common.pm (availableRamMB): replace availableRam, now use the size of /proc/kcore (what else to find the real ramsize?) * common.pm (cat__): created * install2.pm (main): add field meta_class in $o. Can be 'desktop', in case option desktop is given, or if /desktop/i is found in /VERSION * install_steps.pm (miscellaneous): for lnx4win, always have 'mem=' (so that the initrd is visible by both windows * install2.pm (main): add option "desktop" * install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format * install_interactive.pm (partitionWizardSolutions): use only TrueFS for existing_part (partitionWizard): have only "loopback" for lnx4win * pci_probing/pcitable: associate Voodoo5 with Voodoo5 * share/Cards+: add Voodoo5 * bootloader.pm (suggest): add entry linux-nonfb (called linux-up for smp) 2000-09-14 DrakX * snapshot uploaded 2000-09-12 Franois Pons * detect_devices.pm, mouse.pm: moved probing serial port before to detect a wacom tablet (even if a PS/2 or USB mouse is found). * help.pm: corrected reference to previous version of LM (jloup). * install2.pm: removed duplicate code for getting network configuration, using network module. * netconnect.pm: intf is now a hash and no more an array. * network.pm: changed nature of intf to hash from array, reworked write_resolv_conf function to keep old code in comment but only when not used anymore (to make it easier by hand modification). * printer.pm: SOCKET accessible to expert only (jloup). * printerdrake.pm: local port only available for expert if a printer has been detected (jloup). 2000-09-11 Franois Pons * Xconfigurator.pm: reorganized choices of 3D optimizations, added experimental support for expert users. * install_steps_interactive.pm: removed question to keep XF3. 2000-09-05 Franois Pons * printerdrake.pm: removed all previous URI specific mode and added socket and expert URI general mode. * printer.pm: fixed bugs, start lo interface before cups. 2000-09-04 Franois Pons * printerdrake.pm: added pnm2ppa and lm110 support in cups configuration. probe for printer device (parallel) and try to install usb for printer. * printer.pm: removed local printer configuration for cups (keep only local configuration using URI). 2000-09-01 Franois Pons * Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3 is installed, make 16bits by default on 3D hardware acceleration, fixed selection of hardware for hardware acceleration. * install_steps.pm: add cups for printer configuration, used for auto_install. added new function to add packages only if requires are already satisfied. * standalone/printerdrake: updated. 2000-08-31 dam's * moved many things to network.pm and any.pm * everything should be broken now. 2000-08-31 Franois Pons * install2.pm: removed printer default config (now obsoleted). * install_steps_interactive.pm: add cups support. * printerdrake.pm: add cups support. * printer.pm: add cups support. 2000-08-31 Frederic Lepied * install_any.pm (setPackages): install the right glide module according to the Voodoo card detected. * Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4. (autoDefaultDepth): default depth to 16 for Voodoo cards except for Voodo5 ones. 2000-08-29 dam's * moved pppConfig in netconnect.pm and any.pm * moved miscellaneousNetwork in any * modem configuration is now useable in standalone mode. 2000-08-29 David BAUDENS * install_steps_interactive.pm: change Small/Normal/Full -> Minimum/Recommanded/Complete (aka make FredB happy) 2000-08-28 dam's * draknet (netconnect): renamed drakfuck -> draknet. standard ADSL and french alcatel ADSL implemented. * Xconfigurator.pm (autologin) : use of the new autologin system. 2000-08-24 Franois Pons * ../update_kernel*: changed reference from extract_archive to packadrake. * Makefile*: added live_install and live_install2. * Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage Pro AGP card type, commented SiS and S3ViRGE support by GLX. * commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*: updated to use packdrake now. * install2.pm, install_steps.pm, install_steps_gtk, Makefile*: manage live upgrade. * modules.pm: use standard modprobe command for load in live upgrade. * netconnect.pm: added minimal modification for being compilable. * rescue/list: added packdrake and sfdisk. * live_install, live_install2: live upgrade of package. 2000-08-22 dam's * drakfuck (netconnect):finished isdn PCI/ISA card implemetation * added isdndb.net: providers database 2000-08-20 dam's * moved Netconnect.pm to netconnect.pm * moved DrakFuck to drakfuck 2000-08-18 Pixel * share/Cards+: for i810, force VideoRam 2000-08-18 dam's * modules.pm: added isdn type in @drivers_by_category. corrected load_thiskind (thx pixel) : it's not unsafe anymore * Netconnect.pm: just display PCI isdn card recognized. 2000-08-17 Pixel * install_any.pm: many cleanup. moved some functions to common, any or install_interactive (newly created) 2000-08-16 dam's * install_steps_interactive.pm(configureNetwork): added call to isdn configuration * added standalone/DrakFuck: standalone entry point to configure internet connexion. * added Netconnect.pm: internet connexion functions. 2000-08-11 Pixel * install_steps_interactive.pm (selectInstallClass): yet a bigger warning so that people don't choose expert installs. Also set the focus on "Custom" by default. * install_steps_interactive.pm (doPartitionDisks): created, calls the wizard. * install_steps.pm (doPartitionDisksBefore, doPartitionDisksAfter): created (was mainly in install2::doPartitionDisks) * install2.pm (doPartitionDisks): much cleanup * install_any.pm (partitionWizard): working state (still rough) 2000-08-08 Pixel * standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the cdrom addmedia 2000-08-07 Pixel * diskdrake.pm (Resize): * install_steps_gtk.pm (doPartitionDisks): remove the before_leaving ensuring the filehandle is closed * resize_fat/main.pm (DESTROY): use a better solution for ensuring the filehandle is closed 2000-08-07 Franois Pons * Xconfigurator.pm: added SiS6326 in the list of chipset that needVideoRam, reported on ml. * install_steps.pm: fixed auto install of printer. 2000-08-06 Pixel * interactive.pm (ask_from_listf): created this GREAT function that should have been created a long time ago. * any.pm, install_any.pm, install_steps_gtk.pm, install_steps_interactive.pm: a lot of rewrite to use the new ask_from_listf, a lot of nice cleanup! * fs.pm (df): created, returns the free space of the part. Save it in $part->{free} * install_steps_gtk.pm (doPartitionDisks): ensure the closing of the device in case of error * resize_fat/main.pm (new): ensure the closing of the device in case of error * install_any.pm (partitionWizard): the great partitioning wizard is created. Not finished yet (nor called from anywhere) * install_steps.pm (doPartitionDisksLnx4win): created function out of doPartitionDisks * install_steps_gtk.pm (installPackages): removed the displaying of size to install (people are bothered cuz not the same size) 2000-08-06 dam's * install_steps_gtk.pm (create_steps_window): use drawing area instead of button. Implemented all steps events. 2000-08-05 Pixel * mouse.pm (detect): test a hack for usb mouse via hub (sparhawk@enteract.com) * fsedit.pm (undo): force isDirty and needKernelReread only if hd hasBeenDirty, otherwise believe the flag saved * partition_table.pm (write): flag hd as hasBeenDirty * install2.pm: a few renaming of methods so that the step names correspond to install2 function and install_steps* methods (eg: configureX & setupXfree unified to configureX) 2000-08-04 dam's * any.pm (setAutoLogin): added this method to write xdm-config * Xconfigurator.pm: clenead autologin code and use of above method 2000-08-04 Pixel * pkgs.pm (setSelectedFromCompssList): save $nb to able to restore it in case of max_size reached. only purpose is the log! * install_steps_interactive.pm (choosePackages): in newbie, ask between Small/Medium/Full install * install_steps_interactive.pm (choosePackages): in expert, have the min_mark be 0 instead of 1 * common.pm (find_index): added this nice function * install_any.pm (getAvailableSpace_mounted): use common::df * loopback.pm (getFree): use common::df * commands.pm (df): use common::df * common.pm (df): added * diskdrake.pm (Resize)): add resizing of reiserfs * share/list.i386: add resize_reiserfs 2000-08-02 dam's * Xconfigurator.pm : autologin is functionall. When wmsession.d is more up to date, I'll add the list of wm to launch at boot. It writes in /etc/X11/xdm/xdm-config. 2000-08-01 Pixel * install2.pm (miscellaneous): modify as chmouel want (aka, "" instead of "no" for MOUSE and KEYBOARD in sysconfig/usb) * services.pm: separation between interaction and action. * install_steps.pm (servicesConfig): the job is now done here * install_steps_interactive.pm (servicesConfig): only the asking part 2000-08-01 Franois Pons * pkgs.pm: fixed the below fixe, now ok. * Xconfigurator.pm: fixed a bug for using default card flags setting, add support for GeForce DDR for both 3.3 and 4.0. * pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use XFree 3.3 as unsupported in XFree 4.0. * share/Cards+: added "NVIDIA GeForce2 DDR (generic)". 2000-07-31 Franois Pons * pkgs.pm: fixed provided package with choice in deps used with a base package, complicated but kernel-fb or similar can be unselected now. 2000-07-27 Franois Pons * install_steps_interactive.pm: changed expert message to ask using XFree 3.3 instead of XFree 4.0 used by default (server). * Xconfigurator.pm: make sure only one server is installed, default to XFree 4.0 if supported unless XFree 3.3 accept 3D acceleration and not XFree 4.0, ask user in such case. * pci_probing/pcitable: added Intel 815 pci ids. 2000-07-26 dam's * install_steps_gtk.pm: applied new LN stars, logo title and help logo. improved steps appearences. * modified share/step-*.xpm * added share/help.xpm * updated ../HACKING to ling help logo. 2000-07-21 Franois Pons * Xconfigurator.pm: enable 3D acceleration configuration with XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3 Utah-GLX accelerated module. 2000-07-20 dam's * Xconfigurator.pm: use {miscellaneous}{autologuser} instead of {miscellaneous}{autologuser} + {miscellaneous}{autologing}. * move some README content to ../HACKING 2000-07-19 dam's * Xconfigurator.pm: added autologin boxes. result is in {miscellaneous}{autologin} and in {miscellaneous}{autologuser} 2000-07-19 Franois Pons * any.pm: added default root to existing root device when adding an entry in bootloader. * bootloader.pm: avoid duplicating entry (floppy and old-floppy) when they are identical. manage hackkernel by suggest an entry by default if installed. * install_steps.pm: reworked symlink closure for bootloader to keep previous configuration. 2000-07-11 Franois Pons * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm, this include a configure_entry from silo.pm to build a initrd if used. * share/compssList: added kde2 packages. * share/compssUsers: added kde2 group, renamed kde to kde1 group specific. 2000-07-07 Franois Pons * install2.pm (choosePackages): always execute setPackage to copy hdlist* and depslist files (support mixed partitionDisks and choosePackages). * install_any.pm (setPackages): avoid clearing upgrade flag. * install_steps.pm (choosePackages): use $first_time to avoid reselection of packages according to compssList. * install_steps_interactive (choosePackages): use $first_time and $individual to avoid reselection of packages according if user go back to step choosePackages. * pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and depslist files in /var/lib/urpmi. * diskdrake.pm: fixed uneditable combo for Mount point action. 2000-06-23 Franois Pons * Xconfigurator.pm: better approach for Sun* server in newbie. * fs.pm: added romfs support for mount. * fsedit.pm: changed auto allocation for partitions for sparc*. * install2.pm: restored bootdisk creation and auto install boot disk creation for sparc*. * install_any.pm: changed vfat to romfs when mounting kickstart floppy on sparc*. * install_steps.pm: avoid proposing formating sunos partition. * install_steps_interactive.pm: boot disk for sparc* and support for installation of SILO on /boot partition (sparc*). * install_steps_newt.pm: removed cylinder 0 bug warning. * interactive.pm: fixed typo for not_edit set to 1 by default. * partition_table.pm: fixed get_holes on sparc* where a whole disk partition caused problems. * partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs. * silo.pm: handle /boot partition, install silo.conf in /boot and make a symlink from /etc. * share/list.sparc: added losetup and genromfs for boot disk creation. 2000-06-21 Pablo Saratxaga * lang.pm: changed the way console font data is written; not all of the [0], [1], [2] values must defined, so three cases must be used. Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then be used by console-tools to load the proper compose table 2000-06-20 Franois Pons * c/sbus.c: added some functions for silo.c integration. * c/silo.c: initial release including write in prom, and translation of disk name from openprom to linux, rh version modified. * silo.pm: added write in prom, support of sunos boot from silo. * partition_table.pm: added support for ufs partition like windows one. * install_steps_interactive.pm: added other entries in silo. * install_steps.pm: support sunos partition. * install_any.pm: automatically mount sunos partition with diskdrake. * fsedit.pm: added /mnt/sunos suggested mount point. * fs.pm: added ufs support for mount. 2000-06-19 Franois Pons * crypto.pm: modified for getting sparc crypto file for sparc*. * modules.pm: make sure to load sd_mod when needed. * pci_probing/main.pm: always use loaw_endian in pci structs. * pci_probing/translate-pcitable.pl: added arch specific module name translation. 2000-06-16 Pixel * modules.pm (write_conf): rename conf.modules to modules.conf if needed. Outputs to modules.conf * detect_devices.pm (cdroms): fix using scd0 for ide-burners when already a scsi cdrom drive 2000-06-13 Pablo Saratxaga * pkgs.pm: added 'acon' requirement for all right-to-left languages 2000-06-07 Franois Pons * diskdrake.pm: added SunOS partition as blue for diskdrake. * install_steps_interactive.pm: make sure of no division by zero may happen. * install_steps_newt.pm: added WARNING for fdisk on sparc*. * modules.pm: make sure of loading sd_mod module after any scsi module. * sbus_probing/main.pm: insmod openprom before trying sbus probing. * pkgs.pm: corrected by use of parabolic solution for size approximation. * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe. 2000-06-05 Pablo Saratxaga * install_steps.pm,lang.pm: added load_console_font, to load the proper console fonts (text mode install is not very useful otherwise) 2000-06-03 Pixel * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs 2000-06-01 Pablo Saratxaga * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font; it fits better with the other fonts. Added a 'README' file with some comments and the required copyright notice 2000-05-29 Franois Pons * Xconfigurator.pm: added support for SBUS card autodetection. * commands.pm: added lssbus to list SBUS devices detected. * detect_devices.pm: removed alpha restriction on USB. * install_steps_interactive.pm: added SBUS support. * c/sbus.c: initial revision, core SBUS support (inspired from kudzu). * c/stuff.xs.pm: added wrapper for sbus.c interface. * sbus_probing/main.pm: initial revision (inspired from kudzu). 2000-05-27 Adam Lebsack * share/list.ppc: various PPC modifications, for HFS * partition_table_mac.pm: bug fixes * partition_table.pm: various HFS fixes, isHiddenMacPart() * diskdrake.pm: added HFS to top buttons when run on PPC * keyboard.pm: fixed name of mac-fr2-ext keymap * install_steps_gtk.pm: added Xpmac server support for PPC. * install_steps_interactive.pm: disallow hardware configuration on PPC for now. All drivers should be in the kernel. setup_this_kind(). * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match our partition table read. Added PPC grep condition for PPC in get_visible_fstab. * fs.pm: fix argument for HFS formatting. * Makefile: special installation of PPC files. 2000-05-25 Chmouel Boudjnah * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on alpha|sparc. 2000-05-25 Franois Pons * silo.pm: added configure_entry to try creating an initrd for an image entry in bootloader. fixed wrong usage of run_programm::rooted with 2>. * commands.pm: fixed insmod command to take modules64.cz* on sparc* * install2.pm: removed create boot disk and create auto install disk on sparc*. force writing of /etc/conf.modules for step setupBootloader. * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*. * install_steps_interactive.pm: added missing $prefix for glob_. call configure_entry in setupSILO. fixed cancel or None entry on setupBootloader. * modules.pm: updated alias for sparc*. * any.pm: fixed proprable wrong test for setupBootloader in beginner at the very beginning. * printer.pm: fixed typo. * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and resolution for these server too. 2000-05-24 Franois Pons * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*. * partition_table_sun.pm: fixed a bug when reading partition table with unused partition in the middle of the table. 2000-05-23 Franois Pons * common.pm: update arch to take into account sparc and sparc64. added better_arch and compat_arch function. * silo.pm: fixed adding new kernel automatically. * install2.pm: removed create boot disk stuff for sparc*. * install_steps.pm: added initrd generation for alpha. added ldconfig at end of installation. removed /usr/bin/dumpkeys existence test on sparc*, should be added in the future. * install_steps_interactive.pm: removed supermount for sparc*. * install_steps_gtk.pm: added /dev/kbd device creation and permedia2 support for sparc*. removed screen limit of 1024x768. * detect_devices.pm: fixed problem on machine with really no IDE interface. * modules.pm: added support for 32 and 64 bit architectures on sparc*. * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate partition. * pkgs.pm: added support for multi-arch rpm file (need for sparc*), fixed correctSize and invCorrectSize to take back a linear approximation above 9Gb approximatively. removed ftp rewind as broken currently. * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed globing (removed) against existing '*'. * partition_table.pm: removed support for non SUN partition table, as it may freeze the kernel or may be blanked? * Xconfigurator.pm: take Sun24 server by default on sparc*, add support for permedia2 card (3DLabs server). * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*. * Makefile: added support for modules and modules64 for sparc*. * c/stuff.xs.pm: added kernel_arch function for getting the current true architecture provided by the kernel (uname -m). 2000-05-09 Pixel * install_any.pm (kdeicons_postinstall): the URL link to doc must be $lang/index.html, not only $lang. * standalone/mousedrake: add handling of XF86Config-4 * any.pm (setupBootloader): fix bug (was adding 2 glob_'s) 2000-05-08 Pixel * install2.pm (main): move the touch of some files here to please linuxconf * install2.pm (miscellaneous): s/KBD/KEYBOARD/ * lilo.pm (install_grub): don't keep symlinks for reiserfs * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs) * install_any.pm (getHds): default mount point for windobe in lowercased for StartOffice(!) 2000-05-08 Pablo Saratxaga * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards * keyboard.pm: Added new Lithuanian keyboard and changed the string for brazilian ABNT-2 to state more clearly its ABNT nature (it is not a standard PC keyboard; it uses some different keycodes) 2000-05-07 Pixel * install_steps.pm (choosePackages): return availableCorrected instead of available * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's) * modules.pm (text2driver): same as text2lang below * keyboard.pm (text2keyboard): same as text2lang below * lang.pm (text2lang): replace the while (... each) by a foreach (keys) (because each is dangerous if loop is exited) * install_steps_interactive.pm (selectKeyboard): better handling of multiple langs question. * ftp.pm (new): Timeout set to 60 (seconds), was default (120) * install_steps_interactive.pm (setup_thiskind): remove ide-* from modules displayed as loaded. 2000-05-06 Pixel * fsedit.pm (check_mntpoint): verify that standard mntpoints (/ /usr) are not on not trueFS * any.pm (setupBootloader): add $prefix for the 2 glob_'s 2000-05-07 Pablo Saratxaga * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua 2000-05-06 Pablo Saratxaga * printerdrake.pm: fixed English error 2000-05-05 Pixel * Xconfigurator.pm (monitorConfiguration): remove the special case for fbdev. * install_steps_interactive.pm (setup_thiskind): replace return by next in case load_module fails. * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4 * pkgs.pm (correctSize): updated for 7.1 * install_any.pm (getAvailableSpace): move the removing of $minAvailableSize here. 2000-05-04 Pixel * install2.pm (configurePrinter): give clicked to printerConfig * interactive.pm (ask_from_entries_ref): set default val if not_edit * interactive_newt.pm (ask_from_entries_refW): remove setting of default val. Now done in interactive::ask_from_entries_ref * interactive_gtk.pm (ask_from_entries_refW): handle empty value * modules.pm (read_already_loaded): ensure that already loaded modules are put in %loaded. * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel) * lilo.pm (install_lilo): truncate label's to 15 chars * install_any.pm (generate_ks_cfg): fix missing space * install_any.pm (generate_ks_cfg): fix bug for nfs comand * install2.pm: get rid of autoformat * install_steps.pm (choosePartitionsToFormat): get rid of autoformat 2000-05-03 Pixel * any.pm (setupBootloader): replace ask_many_from_list by ask_from_list for bootloader choice * services.pm (drakxservices): stop immediately service if removed * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd * install_steps.pm (afterInstallPackages): touch some files to please linuxconf 2000-05-03 Franois Pons * install_steps.pm: updated min size, fixed kppprc generation. * install_any.pm: make sure postinstall-rpm is here before erasing (avoid error on reboot only). 2000-05-02 Pixel * raid.pm (format_part): don't call raid::make if part is already formatted (as raidstop fails) * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any more * install_steps_interactive.pm (setup_thiskind): make insmod'ing fail a simple warning. * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB * share/MonitorsDB: take new one from RedHat * standalone/drakboot: added kfloppy * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly not to have it) 2000-05-01 Pixel * install_steps_interactive.pm (setRootPassword): remove NIS_server, use NIS instead * install_any.pm (setAuthentication): remove NIS_server, use NIS instead * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist 2000-04-28 Pixel * install_steps.pm (afterInstallPackages): fix yet another bug for ttf from windobe handling * install_steps_interactive.pm (selectInstallClass): hide beginner mode in corporate. Display special help. 2000-04-29 Pablo Saratxaga * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales text to be properly aligned (reported by Craig Chang ) * common.pm: now that po handling is correct, I changed the order of reading variables so that it follows the standards ($LANGUAGE first) * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251 2000-04-28 Franois Pons * install_steps*.pm: added support for selection of package during upgrade the same way it is done for installation. added check of minimal size, abort else (at least let the user know about :-) fixed crypto if no network interface available. * install2.pm: fixed problem during upgrade that lost network configuration. 2000-04-28 Pixel * modules.pm (load_raw): don't call commands::insmod, do it in place. Merge with load_multi * install_steps.pm (afterInstallPackages): fix windobe ttfonts symlinking * Xconfigurator.pm (cardConfiguration): load module agpgart for i810 * install_any.pm (getHds): changed the mount point setting for windows partitions as device_windobe is not unique 2000-04-27 Pixel * install_steps_gtk.pm (create_steps_window): changed to adapt to new hidden format * install2.pm (@installSteps): changed the way hidden is handled. Now it is a true perl expression (great power now) * install_steps_gtk.pm (selectInstallClass1): update steps window before asking normal/devel/server. Nicer! * install_steps_interactive.pm (configureNetwork): when "Cancel" pressed at network interface configuration do not skip all configuration. 2000-04-26 Franois Pons * install_steps.pm (pppConfig): modified a lot, removed template file for ifcfg and chat file. 2000-04-26 Pixel * install_steps_gtk.pm (choosePackagesTree): use a fix width for the tree column (so that the checkbox are always visible without scrolling) * standalone/drakboot: drakfloppy and gfloppy are X only, no need to propose them in console * install_any.pm (relGetFile): added auto_inst to files to get from Mandrake/base * install2.pm (main): changed auto_inst behaviour * standalone/adduserdrake: fix a bug (s/$o/$in/g) * interactive_newt.pm (ask_from_entries_refW): now handling complete/changed/focus_out callbacks (at least more than before) * Newt/Newt.xs: added rough callback handling 2000-04-25 Franois Pons * printerdrake.pm: added support for PPA more easily, allow printers entry using ppa driver event if pnm2ppa not installed, install it if neccessary after. * network.pm, install_steps.pm, install_steps_interactive.pm: added support for stoping a network interface, usefull for ppp0 to avoid using it too long. * install_steps.pm: fixed missing local on pap_secrets file. 2000-04-25 Pixel * lilo.pm (install): moved the generation of the keytable here. It is used by both lilo & grub (lilo is not always installed as was assumed) * common.pm (formatAlaTeX): remove bounding spaces * pkgs.pm (setSelectedFromCompssList): remove the hack for min mark 25 in beginner * install_steps_interactive.pm (choosePackages): set $min_mark to 25 in beginner 2000-04-24 Pixel * install_steps_interactive.pm (setupXfree): add a yesorno question for choosing between XF4 and XF3 in expert * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window * install_any.pm (update_userkderc): make sure uid and gid are kept * diskdrake.pm (Create): add Extended_0x85 as a choice for expert * partition_table.pm (add_extended): handle a 3rd arg, $extended_type to tell which kind of extended partition is wanted * partition_table.pm (adjust_main_extended): in non-expert, automatically set extended to linux-extended if there's only linux-type partitions. 2000-04-22 Pablo Saratxaga * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit and not for byte. RAM is expressed in megabytes -> MB 2000-04-19 Franois Pons * install_steps_interactive.pm: fixed crazy mutli CD manipulation. * printer.pm: fixed wrong prototype of print_pages. * install2.pm: set version to 7.1 for crypto stuff. * crypto.pm: commented ackbar crypto site. 2000-04-17 Pixel * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by linuxconf) 2000-04-14 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): don't ask about checking bad blocks for reiserfs, cuz not handled * fs.pm (mount): reiserfs handling * fs.pm (format_reiserfs): added * fs.pm (write_fstab): add option "notail" for reiserfs if the partition holds the kernel (/boot or /) * partition_table.pm (isTrueFS): added, replaces most occurences of isExt2 2000-04-12 Franois Pons * install2.pm: force installation step if package have been selected on step choose packages. * install_any.pm: protected against die in perl (setstep or theme_changed). 2000-04-11 Franois Pons * resize_fat: added some limits verification. * interactive_gtk.pm: corrected swap of arg with help adding. 2000-04-10 Franois Pons * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list, which is used by printerdrake only. drops key bindings. 2000-04-07 Franois Pons * tools/serial_probe: obsoleting pnp_serial which is now replaced by this one, taken from kudzu, really faster and probe all serial devices at one time. modified to probe correctly modem :-) * mouse.pm: updated to use serial_probe interface of detect_devices.pm. * detect_devices.pm: modified to use serial_probe, cache probed devices to avoid reprobing. 2000-04-06 Franois Pons * install_steps_interactive.pm, install_steps.pm: added support for peerdns options of ppp, so removed dns address unless expert. 2000-04-05 Franois Pons * crypto.pm, install_steps_interactive.pm, install2.pm, install_steps.pm: added crypto stuff to support hdlist-crypto.cz2 and depslist-crypto. dependancies are not supported but with a simpler format of depslist file where closure are not done and only package name are used for dependancies. * pkgs.pm: added better support for multi CD manipulation, including selection and refus. 2000-04-04 Franois Pons * pkgs.pm: modified selection packages from compssList by incremental selection, much more quickly. added selected medium for selecting a package. * install_any.pm: refused media hash transfered to selected value of media table. @needToCopy list should only have package of default medium. 2000-04-03 Pixel * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha 2000-03-31 Franois Pons * install_steps_gtk.pm: made changeMedium sub modification permanent. * pkgs.pm: modified upgrade to avoid use of header. 2000-03-31 Pablo Saratxaga * keyboard.pm: some more choices for PPC keyboards 2000-03-30 Franois Pons * install2pm: added eval around loading af_packet and postinstall copy of RPMS. * devices.pm: added /dev/kdb for SPARC. * install_any.pm: modified multi CD management, postinstall copy of RPMS. * install_steps_gtk.pm: added support for Xsun server for SPARC. * install_steps_interactive.pm: added multi CD dialog box for selecting CD available. Serialized ethernet configuration and ppp configuration. * pkgs.pm: added check for infinite recursion for bad depslist. * printer.pm: better test for reparse of printerdb. * Xconfigurator.pm: added support for Xsun server for SPARC. 2000-03-30 Pixel * install_steps_gtk.pm (choosePackagesTree): enhance tree selection 2000-03-29 Pixel * interactive_gtk.pm (wait_messageW): add some padding (nicer) * install_steps_interactive.pm (generateAutoInstFloppy): created, creates a floppy for auto installs. * install_any.pm (generate_ks_cfg): created, generates stage1 ks.cfg file * share/po/DrakX.pot: added special comment for grub entry 2000-03-28 Pixel * install_steps_interactive.pm (selectKeyboard): sort langs for many-lang install * mouse.pm (write): add WHEEL telling if a wheel mouse is there 2000-03-28 Pablo Saratxaga * keyboard.pm: added entries for all three Armenian keyboards 2000-03-26 Pixel * install_any.pm (install_urpmi): full support for multi-hdlist's * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of $prefix/var/lib/urpmi * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a fake name. Access via /tmp/$hdlist is given for non-fake name * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/) 2000-03-25 Pixel * lilo.pm: updated to the new format of entries. It was an hash. Now the key is field kernel_or_dev, and entries is an array. (get): added, it returns the entry using a kernel (needed because entries is no more a hash) * install_steps_interactive.pm (setupLILO): adapted to the new format * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling * fsedit.pm (suggest_part): if suggested part contains a field "hd", ensure the partition is created on this hard drive * install2.pm (main): before leaving installation, remove /var/lib/urpmi if urpmi not installed * diskdrake.pm (Resize): ext2resize to size $part->{size} instead of $size 2000-03-24 Pixel * detect_devices.pm (hasHPT): added. Now nice handling of hpt366 (ultra66) without rebooting and making special floppy :) * lilo.pm (install_grub): much better grub configuration (better than lilo's :pp) * install_steps.pm (setupBootloaderBefore): remove entry floppy for security > 3 2000-03-23 Pixel * install_steps_gtk.pm (selectMouse): added, takes care of telling the X server if the user changed the mouse type. Only done if a serial mouse is chosen. * install_steps_newt.pm (doPartitionDisks): add a call to * mouse.pm (write): added "device=" in etc/sysconfig/mouse for devfs (it looses the symlink /dev/mouse) 2000-03-22 Pixel * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry 2000-03-20 Franois Pons * detect_devices.pm, fs.pm, install_any.pm: added supports for LS-120 floppy drive and icons on desktop of KDE (untested). * printer.pm, printerdrake.pm: added supports for PPA interface in new rhs-printfilters, always enable "Print text as postscript" option for such printers. 2000-03-20 Pablo Saratxaga * keyboard.pm: changed XKB name for Swedish keyboard changed XKB names for Russian and German keyboards added a choice for "Croatian" keyboard * share/compss{,List}: added various new locales-*, ispell-* and netscape-* files. changed ppa to pnm2ppa. 2000-03-17 Franois Pons * install_steps.pm: added setup for all configured queue. * install_steps_interactive.pm: modified for retrieving packages or current configuration. * printer.pm: correction, tested retrieve of printer configuration without printtool comments in printcap file: added update of entry according to gsdriver used (untested again). * printerdrake.pm: better handling of cancel, manage of multiple queue definition together (as lp|My printer). 2000-03-16 Franois Pons * install_steps_interactive.pm: moved in printerdrake.pm the test of printer usage. * printerdrake.pm: heavy modification to handle multiple queue, corrected some bugs too, added much more features as printtool. * printer.pm: added more features for filter, allow printer to be retrieved without help of printtool id in printcap file (untested). 2000-03-14 Pixel * diskdrake.pm (Loopback): handling of the file loopback: test existence of the file and take its size. 2000-03-14 Franois Pons * install_any.pm: corrected for duplicate file on other CD. 2000-03-13 Pixel * detect_devices.pm (floppies): don't return hash but the device name 2000-03-13 Franois Pons * pkgs.pm, install_any.pm: small correction for multiple media installation. * tools/syncrpms: added for handling synchronisation of multiple source rpm directories (and multiple target), include cleaning. * tools/closurepkgs: tools to get rpm that may be installed by DrakX after normal packages installation (printer, network, X11...), may be used to duplicate on other CD some important stuff of the first one. 2000-03-12 Pixel * install_steps_interactive.pm (choosePackages): compute the max_size very simply (sum of all package sizes), otherwise too costly * pkgs.pm (install): call cleanHeaders at the end * pkgs.pm (cleanHeaders): created * install2.pm (miscellaneous): /etc/msec/init.sh is now /usr/sbin/msec (yoann thanks for not telling :pp) * pkgs.pm (install): remove the $prefix of mountpoints for not enough room to install error message 2000-03-11 Pixel * my_gtk.pm (_create_window): add callback on focus to ensure_focus. The result is no more 3 focus states with 2 buttons. * interactive_gtk.pm (ask_from_treelistW): better keyboard handling * raid.pm (make): check the result of mkraid. Suggest raidtools are missing in standalone diskdrake * devices.pm (set_loop): created, searches for an available loopback and sets the file to it * lilo.pm (dev2grub): fixed a missing slash * interactive_gtk.pm (wait_message_nextW): do not update if same message, otherwise silly gtk won't do anything and we'll wait forever :( 2000-03-10 Franois Pons * *.pm: heavy modification to take into account multiple media installation. 2000-03-10 Pixel * install2.pm (@install_classes): cleanup, no more i18n (is now in install_steps_interactive), remove old entries 2000-03-09 Pixel * modules.pm (write_conf): don't add alias block-major-11 in every case * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss) * fs.pm (format_*): move the @options before the device * loopback.pm: created, added a lot of stuff for loopback in diskdrake.pm, fs.pm... 2000-03-08 Pixel * partition_table.pm: %type2fs replaced ox402 by 0x402 * detect_devices.pm (cdroms): fix "scd" (should be "scd0") * install_any.pm (install_urpmi): update for new hdlist.cz2 2000-03-07 Pixel * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/ * install_steps_interactive.pm (addUser): force add a normal user for security 4 2000-03-05 Pixel * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row (tis the Gtk-Perl 0.7002 was of doing) 2000-03-04 Pixel * modules.pm (write_conf): add ide-floppy to the modprobes of post-install supermount 2000-03-03 Pixel * commands.pm (ps): add RSS to ps command 2000-03-02 Adam Lebsack * mouse.pm: added mac mouse detection to mouse::detect. * detect_devices.pm: added a routine to probe /dev/usbmouse on macs. 2000-03-01 Franois Pons * *.pm: heavy modification to take into account smaller transaction during installation. still a lot of test to perform, no provides updated currently and building of hdlist.cz2 and depslist.ordered need old files... nothing done for hdlist.gz during post installation, but hdlist.cz2 is already copied in /var/lib/urpmi [and is used during installation of packages as extract_archive need a true file]. 2000-03-01 Pixel * lilo.pm (install_grub): creation * network.pm (write_interface_conf): ONBOOT = !pcmcia * install_steps_gtk.pm (new): more intelligent SIGCHLD handler 2000-02-29 Pixel * modules.pm: moved common network stuff from "net" to "network" (modules like nfs lockd...) * fs.pm (write_fstab): moved the sort to the right place * services.pm (drakxservices): chkconfig --list is i18n'ed :( set LANGUAGE=C before * partition_table_raw.pm (get_geometry): geom{cylinders} must not be a decimal value :) * install_steps_gtk.pm (create_logo_window): set_name logo for logo window * share/install.rc: force disabling of background image theme * install_steps_gtk.pm (enteringStep): add step information for console 1 * any.pm (addKdmIcon): new function * install_steps.pm (addUser): handle field icon * install_steps_interactive.pm (addUser): add choice of kdm icon * standalone/adduserdrake: add choice of kdm icon * diskdrake.pm (ask_all_data...): change for easier i18n * install_steps.pm (miscellaneous): add CLEAN_TMP handling (need cleaning?) * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP option in expert * install2.pm (miscellaneous): add CLEAN_TMP option for /etc/sysconfig/system * install_steps_interactive.pm (miscellaneous): forbidden useSupermount if high security. * mouse.pm (detect): fix bug (ttyS instead of ttyS0) 2000-02-28 Pixel * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for svga and accel. SVGA also wants 16 bpp. added ugly modeline for 800x600. * partition_table_raw.pm (get_geometry): when the HDIO_GET_IDENTITY fails, defaults to what GETGEO gave * install2.pm (main): use modules::load_multi to increase boot start time * modules.pm (load_multi): added this function for loading many modules at once. * install_steps_gtk.pm (new): increase time before timeout * detect_devices.pm (cdroms): change the device associated with ide-burners (hdX -> scdX). Problem is how to know the X in scdX :( * modules.pm (write_conf): sort scsi_hostadapter's 2000-02-27 Pixel * install2.pm (main): load ide-probe and the like in 'prereq' type so no aliases are added to conf.modules 2000-02-25 Pixel * devices.pm (make): small code cleanup * partition_table_raw.pm (adjustEnd): more explicit error message * fsedit.pm (allocatePartitions): fix a bug (size was getting too big after each allocation) making adjustEnd cry 2000-02-24 Pixel * interactive_gtk.pm (new): added the "new" method to initialize windowheight for isStandalone * install_steps_gtk.pm (new): returns undef in case no X server works * install2.pm (main): moved the ejectCdrom from install_steps::END to here * install2.pm (main): fix the $SIG{SEGV} handler * install2.pm (main): added a "try again" in text install if the "new" fails * install_steps_interactive.pm (createBootdisk): fix an error for non fdX choice of floppy drive * install_steps_interactive.pm (setup_thiskind): remove the "defined @l" 2000-02-23 Pixel * install2.pm (%suggestedPartitions): remove any /boot entries * install2.pm (selectInstallClass): removed the special code to /boot entries from suggestedPartitions for on non-intel (and it was buggy :) * fsedit.pm (@suggestions): remove the /boot entry * fsedit.pm (check_mntpoint): remove the 1024 cylinder check * fsedit.pm (suggest_part): remove the 1024 cylinder special case * install_steps_interactive.pm (setupLILO): replace linear option by lba32 * lilo.pm (suggest): add lba32 by default * install_steps_interactive.pm (load_thiskind): moved the HPT stuff to install_any::ultra66 and call it. Add sound card configuration (3 lines :) * my_gtk.pm and interactive_gtk: resize the list and tree based on root window size * install_steps_gtk: $width and $height goes $::rootwidth and $::rootheight, also other dimensions goes global (main::) * commands.pm (strings): replace the typo \{$n,} by {$n,} 2000-02-23 Franois Pons * build_archive, extract_archive: changed format of TOC to speed up extraction of archive, now 5 to 6 times faster to read TOC :-) 2000-02-22 Pixel * Xconfigurator.pm: load "Cards" database only to translate NAME to fields. Added file CardsNames created from Cards using share/Cards2CardsNames. Kind of list of normalized NAMEs * MonitorsDB: replace the ` ' separator for vendor by `|' * install_steps_interactive.pm (timeConfig): use ask_from_treelist * interactive_gtk.pm (ask_from_treelist): creation of ask_from_treelist. Usage is just the same as ask_from_list with one more argument (the separator eg: |, /) 2000-02-21 Franois Pons * diskdrake.pm: fixed deadlock while trying to create partition when available space is equal or less than 2 cylinders. fixed Create action on corrupted partition by removing stalling window. Blocked partition table writing if there are error by forcing user to correct partition table. * partition_table.pm: fixed typo in verifyParts with cdie, added verifyParts on Resize action. 2000-02-21 Pixel * install_steps_gtk.pm (create_big_help): display the help in full screen * my_gtk.pm (_create_window): add big help on F1 * common.pm (add2hash): now returns the first parameter * mouse.pm (detect): really defaults to serial mouse * interactive.pm: add ask_many_from_list_with_help and ask_many_from_list_with_help_ref * services.pm: creation, it handles what was in standalone/drakxservices 2000-02-18 Pixel * install_steps_gtk.pm (createXconf): added /dev/ (X wants "/dev/psaux" and not "psaux") * diskdrake.pm (Create): show start sector even for non-expert on non-i386 2000-02-16 Pixel * mouse.pm (detect): add defaults to serial mouse * install_steps_gtk.pm (createXconf): remove the defaults to serial mouse 2000-02-15 Pixel * diskdrake.pm: "After %s partition %s," inlined otherwise does not please pablo and translators... 2000-02-14 Pixel * diskdrake.pm (Create): hide start sector choice for non-expert 2000-02-11 Pixel * partition_table_raw.pm (get_geometry): do not use the cylinder number given by HDIO_GETGEO cuz limited to 16bits. Compute using the total_sectors using HDIO_GET_IDENTITY * c/stuff.xs.pm: added total_sectors (gives the number of sector of a drive) * modules.pm (load): ignore error in loading prereq's * modules.pm (@drivers_by_category): rcpci instead of rcpci45, z85230 added * commands.pm (mount): add modules::load_deps otherwise the fs::mount won't succeed insmoding vfat if needed 2000-02-11 Franois Pons * fixed diskdrake to handle limit case when creating and resizing partition table, address size limit and start sector limit. 2000-02-11 Pixel * install2.pm (main): add a callback on SEGV -> message printed -> that way, ENDs are called (otherwise skipped) * install_steps_interactive.pm (setup_thiskind): handles the undef value returned by load_thiskind * install_steps_interactive.pm (exitInstall): do not call install_steps::exitInstall * install_steps (exitInstall): removed * install_steps (END): added (it does ejectCdrom) * install_steps_interactive.pm (load_thiskind): returns undef if error loading a module * fs.pm (format_part): changed the prototype from $;$@ to $;@ otherwise, @options always have a value (mostly undef) and mkdosfs fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32) * install_steps_interactive.pm (setup_thiskind): add a $auto_probe_pci that overrules $o->{auto_probe_pci} (that way no pci probe the second time) 2000-02-10 Franois Pons * heavy modification of build_archive and extract_archive to manage a TOC directly in archive file, handle bzip2 or gzip compression, extract_archive can extract multiple files a time, with minimal invocation of uncompress program and follow symlink and expand directory contents. * use build_archive/extract_archive for locales. * fixed a min/max in install_steps_gtk for Resize/Create partition. * fixed adjustEnd with dos partition table, take care of magic 63 sectors at beginning of partitions, a more solid method should be used for that. 2000-02-10 Pixel * modules.pm (load_thiskind): skip modules "unknown" and "ignore" 2000-02-09 Pixel * partition_table.pm (add): cdie if maximum number of partitions handled by linux is reached * Xconfigurator.pm (chooseResolutionsGtk): display the graphic card or server found * install_any.pm (relGetFile): for mdkinst files, take care not to have a double '/' (see debbugs #591) * install_steps_interactive.pm (configureNetwork): purpose: add ability to configure both modem and lan clean up the behaviour * fs.pm (write_fstab): purpose: sort the fstab per mount point (cuz /usr must be before /usr/local) also: rewrite of the part writing the fstab. >24625 24626 24627 24628 24629 24630 24631 24632 24633 24634 24635 24636 24637 24638 24639 24640 24641 24642 24643 24644 24645 24646 24647 24648 24649 24650 24651 24652 24653 24654 24655 24656 24657 24658 24659 24660 24661 24662 24663 24664 24665 24666 24667 24668 24669 24670 24671 24672 24673 24674 24675 24676 24677 24678 24679 24680 24681 24682 24683 24684 24685 24686 24687 24688 24689 24690 24691 24692 24693 24694 24695 24696 24697 24698 24699 24700 24701 24702 24703 24704 24705 24706 24707 24708 24709 24710 24711 24712 24713 24714 24715 24716 24717 24718 24719 24720 24721 24722 24723 24724 24725 24726 24727 24728 24729 24730 24731 24732 24733 24734 24735 24736 24737 24738 24739 24740 24741 24742 24743 24744 24745 24746 24747 24748 24749 24750 24751 24752 24753 24754 24755 24756 24757 24758 24759 24760 24761 24762 24763 24764 24765 24766 24767 24768 24769 24770 24771 24772 24773 24774 24775 24776 24777 24778 24779 24780 24781 24782 24783 24784 24785 24786 24787 24788 24789 24790 24791 24792 24793 24794 24795 24796 24797 24798 24799 24800 24801 24802 24803 24804 24805 24806 24807 24808 24809 24810 24811 24812 24813 24814 24815 24816 24817 24818 24819 24820 24821 24822 24823 24824 24825 24826 24827 24828 24829 24830 24831 24832 24833 24834 24835 24836 24837 24838 24839 24840 24841 24842 24843 24844 24845 24846 24847 24848 24849 24850 24851 24852 24853 24854 24855 24856 24857 24858 24859 24860 24861 24862 24863 24864 24865 24866 24867 24868 24869 24870 24871 24872 24873 24874 24875 24876 24877 24878 24879 24880 24881 24882 24883 24884 24885 24886 24887 24888 24889 24890 24891 24892 24893 24894 24895 24896 24897 24898 24899 24900 24901 24902 24903 24904 24905 24906 24907 24908 24909 24910 24911 24912 24913 24914 24915 24916 24917 24918 24919 24920 24921 24922 24923 24924 24925 24926 24927 24928 24929 24930 24931 24932 24933 24934 24935 24936 24937 24938 24939 24940 24941 24942 24943 24944 24945 24946 24947 24948 24949 24950 24951 24952 24953 24954 24955 24956 24957 24958 24959 24960 24961 24962 24963 24964 24965 24966 24967 24968 24969 24970 24971 24972 24973 24974 24975 24976 24977 24978 24979 24980 24981 24982 24983 24984 24985 24986 24987 24988 24989 24990 24991 24992 24993 24994 24995 24996 24997 24998 24999 25000 25001 25002 25003 25004 25005 25006 25007 25008 25009 25010 25011 25012 25013 25014 25015 25016 25017 25018 25019 25020 25021 25022 25023 25024 25025 25026 25027 25028 25029 25030 25031 25032 25033 25034 25035 25036 25037 25038 25039 25040 25041 25042 25043 25044 25045 25046 25047 25048 25049 25050 25051 25052 25053 25054 25055 25056 25057 25058 25059 25060 25061 25062 25063 25064 25065 25066 25067 25068 25069 25070 25071 25072 25073 25074 25075 25076 25077 25078 25079 25080 25081 25082 25083 25084 25085 25086 25087 25088 25089 25090 25091 25092 25093 25094 25095 25096 25097 25098 25099 25100 25101 25102 25103 25104 25105 25106 25107 25108 25109 25110 25111 25112 25113 25114 25115 25116 25117 25118 25119 25120 25121 25122 25123 25124 25125 25126 25127 25128 25129 25130 25131 25132 25133 25134 25135 25136 25137 25138 25139 25140 25141 25142 25143 25144 25145 25146 25147 25148 25149 25150 25151 25152 25153 25154 25155 25156 25157 25158 25159 25160 25161 25162 25163 25164 25165 25166 25167 25168 25169 25170 25171 25172 25173 25174 25175 25176 25177 25178 25179 25180 25181 25182 25183 25184 25185 25186 25187 25188 25189 25190 25191 25192 25193 25194 25195 25196 25197 25198 25199 25200 25201 25202 25203 25204 25205 25206 25207 25208 25209 25210 25211 25212 25213 25214 25215 25216 25217 25218 25219 25220 25221 25222 25223 25224 25225 25226 25227 25228 25229 25230 25231 25232 25233 25234 25235 25236 25237 25238 25239 25240 25241 25242 25243 25244 25245 25246 25247 25248 25249 25250 25251 25252 25253 25254 25255 25256 25257 25258 25259 25260 25261 25262 25263 25264 25265 25266 25267 25268 25269 25270 25271 25272 25273 25274 25275 25276 25277 25278 25279 25280 25281 25282 25283 25284 25285 25286 25287 25288 25289 25290 25291 25292 25293 25294 25295 25296 25297 25298 25299 25300 25301 25302 25303 25304 25305 25306 25307 25308 25309 25310 25311 25312 25313 25314 25315 25316 25317 25318 25319 25320 25321 25322 25323 25324 25325 25326 25327 25328 25329 25330 25331 25332 25333 25334 25335 25336 25337 25338 25339 25340 25341 25342 25343 25344 25345 25346 25347 25348 25349 25350 25351 25352 25353 25354 25355 25356 25357 25358 25359 25360 25361 25362 25363 25364 25365 25366 25367 25368 25369 25370 25371 25372 25373 25374 25375 25376 25377 25378 25379 25380 25381 25382 25383 25384 25385 25386 25387 25388 25389 25390 25391 25392 25393 25394 25395 25396 25397 25398 25399 25400 25401 25402 25403 25404 25405 25406 25407 25408 25409 25410 25411 25412 25413 25414 25415 25416 25417 25418 25419 25420 25421 25422 25423 25424 25425 25426 25427 25428 25429 25430 25431 25432 25433 25434 25435 25436 25437 25438 25439 25440 25441 25442 25443 25444 25445 25446 25447 25448 25449 25450 25451 25452 25453 25454 25455 25456 25457 25458 25459 25460 25461 25462 25463 25464 25465 25466 25467 25468 25469 25470 25471 25472 25473 25474 25475 25476 25477 25478 25479 25480 25481 25482 25483 25484 25485 25486 25487 25488 25489 25490 25491 25492 25493 25494 25495 25496 25497 25498 25499 25500 25501 25502 25503 25504 25505 25506 25507 25508 25509 25510 25511 25512 25513 25514 25515 25516 25517 25518 25519 25520 25521 25522 25523 25524 25525 25526 25527 25528 25529 25530 25531 25532 25533 25534 25535 25536 25537 25538 25539 25540 25541 25542 25543 25544 25545 25546 25547 25548 25549 25550 25551 25552 25553 25554 25555 25556 25557 25558 25559 25560 25561 25562 25563 25564 25565 25566 25567 25568 25569 25570 25571 25572 25573 25574 25575 25576 25577 25578 25579 25580 25581 25582 25583 25584 25585 25586 25587 25588 25589 25590 25591 25592 25593 25594 25595 25596 25597 25598 25599 25600 25601 25602 25603 25604 25605 25606 25607 25608 25609 25610 25611 25612 25613 25614 25615 25616 25617 25618 25619 25620 25621 25622 25623 25624 25625 25626 25627 25628 25629 25630 25631 25632 25633 25634 25635 25636 25637 25638 25639 25640 25641 25642 25643 25644 25645 25646 25647 25648 25649 25650 25651 25652 25653 25654 25655 25656 25657 25658 25659 25660 25661 25662 25663 25664 25665 25666 25667 25668 25669 25670 25671 25672 25673 25674 25675 25676 25677 25678 25679 25680 25681 25682 25683 25684 25685 25686 25687 25688 25689 25690 25691 25692 25693 25694 25695 25696 25697 25698 25699 25700 25701 25702 25703 25704 25705 25706 25707 25708 25709 25710 25711 25712 25713 25714 25715 25716 25717 25718 25719 25720 25721 25722 25723 25724 25725 25726 25727 25728 25729 25730 25731 25732 25733 25734 25735 25736 25737 25738 25739 25740 25741 25742 25743 25744 25745 25746 25747 25748 25749 25750 25751 25752 25753 25754 25755 25756 25757 25758 25759 25760 25761 25762 25763 25764 25765 25766 25767 25768 25769 25770 25771 25772 25773 25774 25775 25776 25777 25778 25779 25780 25781 25782 25783 25784 25785 25786 25787 25788 25789 25790 25791 25792 25793 25794 25795 25796 25797 25798 25799 25800 25801 25802 25803 25804 25805 25806 25807 25808 25809 25810 25811 25812 25813 25814 25815 25816 25817 25818 25819 25820 25821 25822 25823 25824 25825 25826 25827 25828 25829 25830 25831 25832 25833 25834 25835 25836 25837 25838 25839 25840 25841 25842 25843 25844 25845 25846 25847 25848 25849 25850 25851 25852 25853 25854 25855 25856 25857 25858 25859 25860 25861 25862 25863 25864 25865 25866 25867 25868 25869 25870 25871 25872 25873 25874 25875 25876 25877 25878 25879 25880 25881 25882 25883 25884 25885 25886 25887 25888 25889 25890 25891 25892 25893 25894 25895 25896 25897 25898 25899 25900 25901 25902 25903 25904 25905 25906 25907 25908 25909 25910 25911 25912 25913 25914 25915 25916 25917 25918 25919 25920 25921 25922 25923 25924 25925 25926 25927 25928 25929 25930 25931 25932 25933 25934 25935 25936 25937 25938 25939 25940 25941 25942 25943 25944 25945 25946 25947 25948 25949 25950 25951 25952 25953 25954 25955 25956 25957 25958 25959 25960 25961 25962 25963 25964 25965 25966 25967 25968 25969 25970 25971 25972 25973 25974 25975 25976 25977 25978 25979 25980 25981 25982 25983 25984 25985 25986 25987 25988 25989 25990 25991 25992 25993 25994 25995 25996 25997 25998 25999 26000 26001 26002 26003 26004 26005 26006 26007 26008 26009 26010 26011 26012 26013 26014 26015 26016 26017 26018 26019 26020 26021 26022 26023 26024 26025 26026 26027 26028 26029 26030 26031 26032 26033 26034 26035 26036 26037 26038 26039 26040 26041 26042 26043 26044 26045 26046 26047 26048 26049 26050 26051 26052 26053 26054 26055 26056 26057 26058 26059 26060 26061 26062 26063 26064 26065 26066 26067 26068 26069 26070 26071 26072 26073 26074 26075 26076 26077 26078 26079 26080 26081 26082 26083 26084 26085 26086 26087 26088 26089 26090 26091 26092 26093 26094 26095 26096 26097 26098 26099 26100 26101 26102 26103 26104 26105 26106 26107 26108 26109 26110 26111 26112 26113 26114 26115 26116 26117 26118 26119 26120 26121 26122 26123 26124 26125 26126 26127 26128 26129 26130 26131 26132 26133 26134 26135 26136 26137 26138 26139 26140 26141 26142 26143 26144 26145 26146 26147 26148 26149 26150 26151 26152 26153 26154 26155 26156 26157 26158 26159 26160 26161 26162 26163 26164 26165 26166 26167 26168 26169 26170 26171 26172 26173 26174 26175 26176 26177 26178 26179 26180 26181 26182 26183 26184 26185 26186 26187 26188 26189 26190 26191 26192 26193 26194 26195 26196 26197 26198 26199 26200 26201 26202 26203 26204 26205 26206 26207 26208 26209 26210 26211 26212 26213 26214 26215 26216 26217 26218 26219 26220 26221 26222 26223 26224 26225 26226 26227 26228 26229 26230 26231 26232 26233 26234 26235 26236 26237 26238 26239 26240 26241 26242 26243 26244 26245 26246 26247 26248 26249 26250 26251 26252 26253 26254 26255 26256 26257 26258 26259 26260 26261 26262 26263 26264 26265 26266 26267 26268 26269 26270 26271 26272 26273 26274 26275 26276 26277 26278 26279 26280 26281 26282 26283 26284 26285 26286 26287 26288 26289 26290 26291 26292 26293 26294 26295 26296 26297 26298 26299 26300 26301 26302 26303 26304 26305 26306 26307 26308 26309 26310 26311 26312 26313 26314 26315 26316 26317 26318 26319 26320 26321 26322 26323 26324 26325 26326 26327 26328 26329 26330 26331 26332 26333 26334 26335 26336 26337 26338 26339 26340 26341 26342 26343 26344 26345 26346 26347 26348 26349 26350 26351 26352 26353 26354 26355 26356 26357 26358 26359 26360 26361 26362 26363 26364 26365 26366 26367 26368 26369 26370 26371 26372 26373 26374 26375 26376 26377 26378 26379 26380 26381 26382 26383 26384 26385 26386 26387 26388 26389 26390 26391 26392 26393 26394 26395 26396 26397 26398 26399 26400 26401 26402 26403 26404 26405 26406 26407 26408 26409 26410 26411 26412 26413 26414 26415 26416 26417 26418 26419 26420 26421 26422 26423 26424 26425 26426 26427 26428 26429 26430 26431 26432 26433 26434 26435 26436 26437 26438 26439 26440 26441 26442 26443 26444 26445 26446 26447 26448 26449 26450 26451 26452 26453 26454 26455 26456 26457 26458 26459 26460 26461 26462 26463 26464 26465 26466 26467 26468 26469 26470 26471 26472 26473 26474 26475 26476 26477 26478 26479 26480 26481 26482 26483 26484 26485 26486 26487 26488 26489 26490 26491 26492 26493 26494 26495 26496 26497 26498 26499 26500 26501 26502 26503 26504 26505 26506 26507 26508 26509 26510 26511 26512 26513 26514 26515 26516 26517 26518 26519 26520 26521 26522 26523 26524 26525 26526 26527 26528 26529 26530 26531 26532 26533 26534 26535 26536 26537 26538 26539 26540 26541 26542 26543 26544 26545 26546 26547 26548 26549 26550 26551 26552 26553 26554 26555 26556 26557 26558 26559 26560 26561 26562 26563 26564 26565 26566 26567 26568 26569 26570 26571 26572 26573 26574 26575 26576 26577 26578 26579 26580 26581 26582 26583 26584 26585 26586 26587 26588 26589 26590 26591 26592 26593 26594 26595 26596 26597 26598 26599 26600 26601 26602 26603 26604 26605 26606 26607 26608 26609 26610 26611 26612 26613 26614 26615 26616 26617 26618 26619 26620 26621 26622 26623 26624 26625 26626 26627 26628 26629 26630 26631 26632 26633 26634 26635 26636 26637 26638 26639 26640 26641 26642 26643 26644 26645 26646 26647 26648 26649 26650 26651 26652 26653 26654 26655 26656 26657 26658 26659 26660 26661 26662 26663 26664 26665 26666 26667 26668 26669 26670 26671 26672 26673 26674 26675 26676 26677 26678 26679 26680 26681 26682 26683 26684 26685 26686 26687 26688 26689 26690 26691 26692 26693 26694 26695 26696 26697 26698 26699 26700 26701 26702 26703 26704 26705 26706 26707 26708 26709 26710 26711 26712 26713 26714 26715 26716 26717 26718 26719 26720 26721 26722 26723 26724 26725 26726 26727 26728 26729 26730 26731 26732 26733 26734 26735 26736 26737 26738 26739 26740 26741 26742 26743 26744 26745 26746 26747 26748 26749 26750 26751 26752 26753 26754 26755 26756 26757 26758 26759 26760 26761 26762 26763 26764 26765 26766 26767 26768 26769 26770 26771 26772 26773 26774 26775 26776 26777 26778 26779 26780 26781 26782 26783 26784 26785 26786 26787 26788 26789 26790 26791 26792 26793 26794 26795 26796 26797 26798 26799 26800 26801 26802 26803 26804 26805 26806 26807 26808 26809 26810 26811 26812 26813 26814 26815 26816 26817 26818 26819 26820 26821 26822 26823 26824 26825 26826 26827 26828 26829 26830 26831 26832 26833 26834 26835 26836 26837 26838 26839 26840 26841 26842 26843 26844 26845 26846 26847 26848 26849 26850 26851 26852 26853 26854 26855 26856 26857 26858 26859 26860 26861 26862 26863 26864 26865 26866 26867 26868 26869 26870 26871 26872 26873 26874 26875 26876 26877 26878 26879 26880 26881 26882 26883 26884 26885 26886 26887 26888 26889 26890 26891 26892 26893 26894 26895 26896 26897 26898 26899 26900 26901 26902 26903 26904 26905 26906 26907 26908 26909 26910 26911 26912 26913 26914 26915 26916 26917 26918 26919 26920 26921 26922 26923 26924 26925 26926 26927 26928 26929 26930 26931 26932 26933 26934 26935 26936 26937 26938 26939 26940 26941 26942 26943 26944 26945 26946 26947 26948 26949 26950 26951 26952 26953 26954 26955 26956 26957 26958 26959 26960 26961 26962 26963 26964 26965 26966 26967 26968 26969 26970 26971 26972 26973 26974 26975 26976 26977 26978 26979 26980 26981 26982 26983 26984 26985 26986 26987 26988 26989 26990 26991 26992 26993 26994 26995 26996 26997 26998 26999 27000 27001 27002 27003 27004 27005 27006 27007 27008 27009 27010 27011 27012 27013 27014 27015 27016 27017 27018 27019 27020 27021 27022 27023 27024 27025 27026 27027 27028 27029 27030 27031 27032 27033 27034 27035 27036 27037 27038 27039 27040 27041 27042 27043 27044 27045 27046 27047 27048 27049 27050 27051 27052 27053 27054 27055 27056 27057 27058 27059 27060 27061 27062 27063 27064 27065 27066 27067 27068 27069 27070 27071 27072 27073 27074 27075 27076 27077 27078 27079 27080 27081 27082 27083 27084 27085 27086 27087 27088 27089 27090 27091 27092 27093 27094 27095 27096 27097 27098 27099 27100 27101 27102 27103 27104 27105 27106 27107 27108 27109 27110 27111 27112 27113 27114 27115 27116 27117 27118 27119 27120 27121 27122 27123 27124 27125 27126 27127 27128 27129 27130 27131 27132 27133 27134 27135 27136 27137 27138 27139 27140 27141 27142 27143 27144 27145 27146 27147 27148 27149 27150 27151 27152 27153 27154 27155 27156 27157 27158 27159 27160 27161 27162 27163 27164 27165 27166 27167 27168 27169 27170 27171 27172 27173 27174 27175 27176 27177 27178 27179 27180 27181 27182 27183 27184 27185 27186 27187 27188 27189 27190 27191 27192 27193 27194 27195 27196 27197 27198 27199 27200 27201 27202 27203 27204 27205 27206 27207 
# Translation of DrakX.po to Russian
# Russian translation of drakX messages
# Copyright (C) 1999-2003 Mandriva
# Pavel Maryanov <acid_jack@ukr.net>, 2002,2003, 2005.
# Alice Lafox <alice@lafox.com.ua>, 2003.
# Alice Lafox <alice@lafox.net>, 2004, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-10-22 19:23+0800\n"
"PO-Revision-Date: 2005-09-20 18:19+0300\n"
"Last-Translator: Pavel Maryanov <acid_jack@ukr.net>\n"
"Language-Team: Russian <doc@lafox.net>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.10.2\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Какой USB-ключ вы хотите форматировать?"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Сейчас будет форматироваться USB-устройство \"%s\". Все данные на нем будут "
"потеряны.\n"
"Убедитесь что вы выбрали именно тот USB-ключ, который нужно форматировать. \n"
"Мы советуем вам вынуть остальные USB-устройства перед выполнением этой "
"операции."

#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Ключ не перезаписываемый"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Похоже, что на ключе USB установлена защита от записи.\n"
"Пожалуйста, извлеките его, снимите защиту от записи, снова подключите его."

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Повторить"

#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Продолжить без ключа USB"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Похоже, что на ключе USB установлена защита от записи, но сейчас\n"
"невозможно безопасно извлечь его.\n"
"\n"
"\n"
"Нажмите на кнопку, чтобы перезагрузить машину, извлеките его,\n"
"снимите защиту от записи, снова подключите ключ, и еще раз\n"
"запустите Mandriva Move."

#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
#, c-format
msgid "Reboot"
msgstr "Перезагрузка"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Ваш USB-ключ не имеет ни одного нормального раздела Windows (FAT).\n"
"Для продолжения нужен хотя бы один раздел (помимо того, это\n"
"является более стандартным, так как вы сможете переносить и иметь\n"
"доступ к своим файлам на машинах с Windows). Вставьте, пожалуйста,\n"
"USB-ключ с разделом Windows на нем.\n"
"\n"
"\n"
"Вы также можете продолжить без USB-ключа - в этом случае вы\n"
"сможете использовать Mandriva Move как обычную операционную\n"
"систему Mandriva."

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"В вашей системе не было обнаружено каких-либо ключей USB.\n"
"Если вы подключите ключ USB сейчас, Mandriva Move будет иметь\n"
"возможность явно сохранить данные в вашем домашнем каталоге\n"
"и конфигурацию всей системы для следующей загрузки на этом\n"
"или другом компьютере. Примечание: если вы подключили ключ\n"
"сейчас, подождите несколько секунд перед повторным определением.\n"
"\n"
"\n"
"Вы также можете продолжить и без ключа USB - вы все еще будете\n"
"в состоянии использовать Mandriva Move как обычную операционную\n"
"систему Mandriva."

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Для сохранения ваших данных нужен ключ"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Определить USB-ключ снова"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Настраивается ключ USB"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Подождите, пожалуйста, настраиваются конфигурационные файлы системы на ключе "
"USB..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Введите свою информацию о пользователе, для хранителя экрана будет "
"использован пароль"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Автоматическая настройка"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Подождите, пожалуйста, определяются и настраиваются устройства..."

#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1777
#: install_any.pm:1829 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
#: network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:857 network/netconnect.pm:957
#: network/netconnect.pm:961 network/netconnect.pm:965
#: network/netconnect.pm:970 network/netconnect.pm:1115
#: network/netconnect.pm:1119 network/netconnect.pm:1238
#: network/netconnect.pm:1243 network/netconnect.pm:1263
#: network/netconnect.pm:1422 network/thirdparty.pm:319
#: network/thirdparty.pm:326 network/thirdparty.pm:370
#: network/thirdparty.pm:372 network/thirdparty.pm:393
#: network/thirdparty.pm:417 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:686
#: printer/printerdrake.pm:690 printer/printerdrake.pm:772
#: printer/printerdrake.pm:1555 printer/printerdrake.pm:1603
#: printer/printerdrake.pm:1640 printer/printerdrake.pm:1685
#: printer/printerdrake.pm:1689 printer/printerdrake.pm:1703
#: printer/printerdrake.pm:1795 printer/printerdrake.pm:1876
#: printer/printerdrake.pm:1880 printer/printerdrake.pm:1884
#: printer/printerdrake.pm:1933 printer/printerdrake.pm:1991
#: printer/printerdrake.pm:1995 printer/printerdrake.pm:2009
#: printer/printerdrake.pm:2129 printer/printerdrake.pm:2133
#: printer/printerdrake.pm:2176 printer/printerdrake.pm:2249
#: printer/printerdrake.pm:2267 printer/printerdrake.pm:2276
#: printer/printerdrake.pm:2285 printer/printerdrake.pm:2296
#: printer/printerdrake.pm:2360 printer/printerdrake.pm:2511
#: printer/printerdrake.pm:2924 printer/printerdrake.pm:3208
#: printer/printerdrake.pm:3214 printer/printerdrake.pm:3779
#: printer/printerdrake.pm:3783 printer/printerdrake.pm:3787
#: printer/printerdrake.pm:4183 printer/printerdrake.pm:4424
#: printer/printerdrake.pm:4452 printer/printerdrake.pm:4529
#: printer/printerdrake.pm:4595 printer/printerdrake.pm:4715
#: standalone/drakTermServ:394 standalone/drakTermServ:464
#: standalone/drakTermServ:473 standalone/drakTermServ:774
#: standalone/drakTermServ:781 standalone/drakTermServ:802
#: standalone/drakTermServ:849 standalone/drakTermServ:1095
#: standalone/drakTermServ:1572 standalone/drakTermServ:1581
#: standalone/drakTermServ:1589 standalone/drakTermServ:1594
#: standalone/drakTermServ:1602 standalone/drakTermServ:1618
#: standalone/drakTermServ:1638 standalone/drakauth:36
#: standalone/drakbackup:511 standalone/drakbackup:625
#: standalone/drakbackup:1105 standalone/drakbackup:1136
#: standalone/drakbackup:1321 standalone/drakbackup:1653
#: standalone/drakbackup:1809 standalone/drakbackup:2525
#: standalone/drakbackup:4435 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:385
#: standalone/draksambashare:389 standalone/draksambashare:392
#: standalone/draksambashare:395 standalone/draksambashare:455
#: standalone/draksambashare:479 standalone/draksambashare:553
#: standalone/draksambashare:635 standalone/draksambashare:702
#: standalone/draksambashare:802 standalone/draksambashare:809
#: standalone/draksambashare:944 standalone/draksambashare:1135
#: standalone/draksambashare:1144 standalone/draksambashare:1153
#: standalone/draksambashare:1174 standalone/draksambashare:1183
#: standalone/draksambashare:1192 standalone/draksambashare:1212
#: standalone/draksambashare:1220 standalone/draksambashare:1232
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Ошибка"

#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Произошла ошибка, но я не знаю, как ее корректно обработать.\n"
"Продолжайте на свой собственный страх и риск."

#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Произошла ошибка"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Возникла ошибка:\n"
"\n"
"\n"
"%s\n"
"\n"
"Это может быть вызвано повреждением\n"
"конфигурационных файлов системы на ключе USB,\n"
"в этом случае его извлечение с последующей\n"
"перезагрузкой Mandriva Move решит проблему.\n"
"Для этого нажмите на соответствующую кнопку.\n"
"\n"
"\n"
"Вы также можете перезагрузить и извлечь ключ USB,\n"
"или изучить его содержимое из другой ОС, или даже\n"
"просмотреть log-файлы в консолях #3 и #4, чтобы\n"
"попытаться выяснить, что произошло."

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Удалить конфигурационные файлы системы"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Просто перезагрузить"

#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Вы можете запустить только без поддержки CDROM'a"

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Убить эти программы"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Нет поддержки CDROM'a"

#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "Прочтите внимательно!"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Вы не можете использовать другой CDROM, пока выполняются следующие "
"программы: \n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Копируется в память, чтобы извлечь CDROM"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 КБ"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 КБ"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 МБ"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 МБ"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 МБ"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 МБ"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 МБ"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 МБ"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 МБ или больше"

#: Xconfig/card.pm:162
#, c-format
msgid "X server"
msgstr "X-сервер"

#: Xconfig/card.pm:163
#, c-format
msgid "Choose an X server"
msgstr "Выберите X-сервер"

#: Xconfig/card.pm:195
#, c-format
msgid "Multi-head configuration"
msgstr "Настройка нескольких головок"

#: Xconfig/card.pm:196
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Ваша система поддерживает настройку многосекционной головки.\n"
"Что вы хотите сделать?"

#: Xconfig/card.pm:265
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Не могу установить пакет Xorg: %s"

#: Xconfig/card.pm:275
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Выберите объем памяти вашей видеокарты"

#: Xconfig/card.pm:367
#, c-format
msgid "Xorg configuration"
msgstr "Настройка Xorg"

#: Xconfig/card.pm:369
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Какую конфигурацию Xorg вы хотите получить?"

#: Xconfig/card.pm:402
#, c-format
msgid "Configure all heads independently"
msgstr "Настроить все головки независимо"

#: Xconfig/card.pm:403
#, c-format
msgid "Use Xinerama extension"
msgstr "Использовать расширение Xinerama"

#: Xconfig/card.pm:408
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Настроить только карту \"%s\"%s"

# ../../Xconfig/various.pm_.c:23 #, c-format
#: Xconfig/card.pm:420 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:427 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s с аппаратным 3D-ускорением"

#: Xconfig/card.pm:429
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr ""
"Ваша видеокарта может иметь аппаратную поддержку 3D-ускорения в Xorg %s."

#: Xconfig/card.pm:435
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s с ЭКСПЕРИМЕНТАЛЬНЫМ аппаратным 3D-ускорением"

#: Xconfig/card.pm:437
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Ваша видеокарта может иметь аппаратную поддержку 3D-ускорения,\n"
"поддерживаемую Xorg %s, ПОМНИТЕ, ЭТО ЭКСПЕРИМЕНТАЛЬНАЯ ПОДДЕРЖКА\n"
"И ВОЗМОЖНО ЗАВИСАНИЕ ВАШЕГО КОМПЬЮТЕРА."

#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
#, c-format
msgid "Custom"
msgstr "Выборочно"

#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4524 printer/printerdrake.pm:4988
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Выход"

#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Видеокарта"

#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Монитор"

#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Разрешение"

#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Проверить"

#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1112 standalone/drakfont:494
#: standalone/drakfont:556
#, c-format
msgid "Options"
msgstr "Параметры"

#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "Ваш конфигурационный файл Xorg  неверен, мы его игнорируем."

#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Сохранить изменения?\n"
"Текущие настройки:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Выберите монитор для головы #%d"

#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Выберите монитор"

#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n'Play"

#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Обычный"

#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Производитель"

#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Исследование Plug'n'Play завершилось неудачей. Пожалуйста, выберите "
"соответствующий монитор"

#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Критическими являются два параметра: частота обновления по вертикали,\n"
"которая является частотой обновления всего экрана; и наиболее важный -\n"
"частота синхронизации по горизонтали, которая является частотой отображения\n"
"строчной развертки.\n"
"\n"
"ОЧЕНЬ ВАЖНО, чтобы вы не выбрали тип монитора с частотами синхронизации за\n"
"пределами возможностей вашего монитора: вы можете испортить свой монитор.\n"
"Если сомневаетесь - выберите безопасную установку."

#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Частота обновления по горизонтали"

#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Частота обновления по вертикали"

#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 цветов (8 бит)"

#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 тысячи цветов (15 бит)"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 тысяч цветов (16 бит)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 миллионов цветов (24 бита)"

#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Разрешения"

#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1595 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Другие"

#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Выберите разрешение и глубину цвета"

#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Видеокарта: %s"

#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1361 standalone/drakbackup:4095
#: standalone/drakbackup:4155 standalone/drakbackup:4199
#: standalone/drakbackup:4453 standalone/drakconnect:158
#: standalone/drakconnect:852 standalone/drakconnect:939
#: standalone/drakconnect:1030 standalone/drakfont:577 standalone/drakfont:587
#: standalone/draksplash:173 standalone/drakups:212 standalone/net_monitor:339
#: ugtk2.pm:392 ugtk2.pm:490 ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "ОК"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3859 standalone/drakautoinst:215
#: standalone/drakbackup:1361 standalone/drakbackup:4024
#: standalone/drakbackup:4028 standalone/drakbackup:4083
#: standalone/drakbackup:4453 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:587 standalone/drakfont:665 standalone/drakfont:742
#: standalone/draksplash:173 standalone/drakups:219 standalone/logdrake:176
#: standalone/net_monitor:338 ugtk2.pm:386 ugtk2.pm:488 ugtk2.pm:497
#: ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Отмена"

#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:4020 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:512 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:320 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Справка"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Проверка настроек"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Хотите протестировать настройки?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Предупреждение: тестирование этой видеокарты может подвесить ваш компьютер"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Возникла ошибка:\n"
"%s\n"
"Попробуйте изменить некоторые параметры"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Закроется через %d секунд"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Это правильная настройка?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Раскладка клавиатуры: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Тип мыши: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Мышь: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Монитор: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "HorizSync монитора: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "VertRefresh монитора: %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Видеокарта: %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Видеопамять: %s КБ\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Глубина цвета: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Разрешение: %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Драйвер Xorg: %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Графический интерфейс при загрузке"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Можно настроить ваш компьютер на автоматический запуск графического\n"
"интерфейса (Xorg) во время загрузки. Хотите чтобы Xorg запускался при "
"перезагрузке?"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Похоже, что у вашей видеокарты имеется коннектор TV-OUT.\n"
"Она может быть настроена для работы с использованием буфера кадров.\n"
"\n"
"Для этого вы должны подключить свою видеокарту к телевизору перед загрузкой "
"компьютера.\n"
"Затем выберите пункт \"TVout\" в начальном загрузчике\n"
"\n"
"У вас есть этот разъем?"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Какой формат использует ваш телевизор?"

#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "другое"

#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:376
#: standalone/service_harddrake:208
#, c-format
msgid "Please wait"
msgstr "Подождите, пожалуйста"

#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Установка начального загрузчика в процессе"

#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO желает прописать новый Volume ID для диска %s.  Примите к сведению, "
"что\n"
" изменение Volume ID для загрузочного диска Windows NT, 2000 или XP фатально "
"для Windows.\n"
"Это предупреждение не актуально для Windows 95 , 98 или для дисков с данными "
"NT .\n"
"\n"
"Прописать новый Volume ID?"

#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
"Установка начального загрузчика завершилась неудачей.\n"
"Произошла следующая ошибка:"

#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Возможно, вам необходимо сменить свое загрузочное устройство\n"
" Open Firmware, чтобы заработал начальный загрузчик. Если вы не видите\n"
" приглашения начального загрузчика при перезагрузке, нажмите и\n"
" удерживайте Command-Option-O-F при перезагрузке и введите:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Затем напишите: shut-down\n"
"При следующей загрузке вы должны увидеть приглашение начального загрузчика."

#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Вы решили установить начальный загрузчик на раздел.\n"
"Предполагается, что у вас уже есть начальный загрузчик на жестком диске,\n"
"с которого вы загрузились (напр., System Commander).\n"
"\n"
"С какого диска вы загружаетесь?"

#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Первый сектор диска (MBR)"

#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Первый сектор корневого раздела"

#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "На дискету"

#: any.pm:236 help.pm:739 printer/printerdrake.pm:4180
#, c-format
msgid "Skip"
msgstr "Пропустить"

#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Установка LILO/grub"

#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Куда вы хотите установить начальный загрузчик?"

#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Настройка стиля загрузки"

#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Главные параметры начального загрузчика"

#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Укажите объем RAM в MB"

#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Опция ``Ограничить параметры командной строки'' не используется без пароля"

#: any.pm:278 any.pm:615 authentication.pm:192
#, c-format
msgid "The passwords do not match"
msgstr "Пароли не совпадают"

#: any.pm:278 any.pm:615 authentication.pm:192 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "Попробуйте еще раз, пожалуйста"

#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Используемый начальный загрузчик"

#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Загрузочное устройство"

#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Пауза перед загрузкой образа по умолчанию"

#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Включить ACPI"

#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr "Запретить APIC"

#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr "Запретить Local APIC"

#: any.pm:294 any.pm:650 authentication.pm:197 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:585 printer/printerdrake.pm:1867
#: printer/printerdrake.pm:1988 standalone/drakbackup:1639
#: standalone/drakbackup:3615 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Пароль"

#: any.pm:295 any.pm:651 authentication.pm:198
#, c-format
msgid "Password (again)"
msgstr "Пароль (еще раз)"

#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "Ограничить параметры командной строки"

#: any.pm:296
#, c-format
msgid "restrict"
msgstr "ограничить"

#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Очищать /tmp  при каждой загрузке"

#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Укажите точный объем RAM (найдено %d MB)"

#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "Сообщение инициализации"

#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "Задержка Open Firmware"

#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Тайм-аут при загрузке ядра"

#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Включить загрузку с CD?"

#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "Включить загрузку OF?"

#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "ОС по умолчанию?"

#: any.pm:369
#, c-format
msgid "Image"
msgstr "Образ"

#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Root"

#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Дополнение"

#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Видеорежим"

#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "Сетевой профиль"

#: any.pm:385 any.pm:390 any.pm:392
#, c-format
msgid "Label"
msgstr "Метка"

#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/drakbackup:2093
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "По умолчанию"

#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Размер initrd"

#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "Без видео"

#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Пустая метка не допускается"

#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Вы должны указать образ ядра"

#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Вы должны указать корневой раздел"

#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Эта метка уже используется"

#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Какой тип пункта вы хотите добавить?"

#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Другая ОС (SunOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Другая ОС (MacOS...)"

#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Другая ОС (Windows...)"

#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"На данный момент в вашем меню загрузки имеются следующие пункты.\n"
"Вы можете добавить еще несколько или изменить существующие."

#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "доступ к Х-программам"

#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "доступ к инструментам rpm"

#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "разрешить \"su\""

#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "доступ к административным файлам"

#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "доступ к сетевым утилитам"

#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "доступ к утилитам компиляции"

#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(уже добавлено %s)"

#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Этот пароль слишком прост"

#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Укажите имя пользователя, пожалуйста"

#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr ""
"Имя пользователя должно содержать только буквы в нижнем регистре, \n"
"цифры , `-' и `_'"

#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "Имя пользователя слишком длинное"

#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Это имя пользователя уже добавлено"

#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID пользователя"

#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "ID группы"

#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr " %s должно быть числом"

#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr "%s должно быть больше 500. Принять в любом случае?"

#: any.pm:631 standalone/draksambashare:1216
#, c-format
msgid "Add user"
msgstr "Добавить пользователя"

#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Введите пользователя\n"
"%s"

#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4988
#: standalone/drakbackup:2813 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Готово"

#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Принять"

#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Настоящее имя"

#: any.pm:649 standalone/drakbackup:1634
#, c-format
msgid "Login name"
msgstr "Login name"

#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Командный процессор"

#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Значок"

#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Автоматический вход"

#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Я могу настроить ваш компьютер на автоматический вход в систему одного "
"пользователя."

#: any.pm:705
#, c-format
msgid "Use this feature"
msgstr "Использовать эту возможность"

#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Выберите пользователя по умолчанию:"

#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Выберите запускаемый оконный менеджер:"

#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "Выберите используемый язык, пожалуйста."

#: any.pm:720 any.pm:788
#, c-format
msgid "Language choice"
msgstr "Выбор языка"

#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux может поддерживать несколько языков. Выберите\n"
"языки, которые вы хотите установить. Они будут доступны, когда\n"
"завершится установка и вы перезапустите свою систему."

#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr "Мультиязычность"

#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Использовать по умолчанию Unicode"

#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "Все языки"

#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
#, c-format
msgid "Country / Region"
msgstr "Страна / Регион"

#: any.pm:842
#, c-format
msgid "Please choose your country."
msgstr "Пожалуйста, выберите вашу страну."

#: any.pm:844
#, c-format
msgid "Here is the full list of available countries"
msgstr "Здесь представлен полный список имеющихся стран"

#: any.pm:845
#, c-format
msgid "Other Countries"
msgstr "Другие страны"

#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Дополнительно"

#: any.pm:853
#, c-format
msgid "Input method:"
msgstr "Метод ввода:"

#: any.pm:856 install_any.pm:423 network/netconnect.pm:318
#: network/netconnect.pm:323 network/netconnect.pm:1229 network/wireless.pm:7
#: printer/printerdrake.pm:105
#, c-format
msgid "None"
msgstr "Отсутствует"

#: any.pm:973
#, c-format
msgid "No sharing"
msgstr "Нет общего доступа"

#: any.pm:973
#, c-format
msgid "Allow all users"
msgstr "Разрешить всем пользователям"

#: any.pm:977
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Хотите разрешить пользователям открывать доступ к некоторым своим\n"
"каталогам? Это позволит пользователям просто нажать на \"Общий доступ\"\n"
"в konqueror и nautilus.\n"
"\"Выборочно\" разрешит настроить доступ отдельным пользователям.\n"

#: any.pm:989
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: традиционная для Unix система раздачи файлов, имеет слабую поддержку в "
"Mac и Windows."

#: any.pm:992
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: система совместного использования файлов, используется в Windows, Mac "
"OS X и в большинстве современных систем Linux."

#: any.pm:1000
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Вы можете экспортировать при помощи NFS или SMB. Пожалуйста, выберите, "
"который из них вы желаете использовать."

#: any.pm:1025
#, c-format
msgid "Launch userdrake"
msgstr "Запустить userdrake"

#: any.pm:1025 printer/printerdrake.pm:4062 printer/printerdrake.pm:4065
#: printer/printerdrake.pm:4066 printer/printerdrake.pm:4067
#: printer/printerdrake.pm:5306 standalone/drakTermServ:294
#: standalone/drakbackup:4217 standalone/drakbug:126 standalone/drakfont:500
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Закрыть"

#: any.pm:1027
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Общий доступ каждого пользователя использует группу \"fileshare\". \n"
"Вы можете использовать userdrake для добавления пользователей в эту группу."

#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Локальный файл"

#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Смарт-карта"

#: authentication.pm:27 authentication.pm:163
#, c-format
msgid "Windows Domain"
msgstr "Домен Windows"

#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Active Directory с SFU"

#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Active Directory с Winbind"

#: authentication.pm:66
#, c-format
msgid "Local file:"
msgstr "Локальный файл:"

#: authentication.pm:66
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"Использовать локальную авторизацию и информацию пользователя из локального "
"файла"

#: authentication.pm:67
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:67
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"Сообщает вашему компьютеру, что он должен использовать LDAP для всех или "
"некоторых авторизаций. LDAP объединяет определенные типы информации внутри "
"вашей организации."

#: authentication.pm:68
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:68
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"Позволяет группе компьютеров работать в одинаковом домене Network "
"Information Service с общими файлами паролей и групп."

#: authentication.pm:69
#, c-format
msgid "Windows Domain:"
msgstr "Домен Windows:"

#: authentication.pm:69
#, fuzzy, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"iWinbind позволяет системе получать информацию и аутентифицировать "
"пользователей в домене Windows."

#: authentication.pm:70
#, c-format
msgid "Active Directory with SFU:"
msgstr "Active Directory с SFU:"

#: authentication.pm:70
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr "С Kerberos и Ldap для аутентификации на сервере с Active Directory"

#: authentication.pm:71
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Active Directory с Winbind:"

#: authentication.pm:71
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""
"Winbind позволяет системе аутентифицировать пользователей на сервере Windows "
"с Active Directory."

#: authentication.pm:96
#, c-format
msgid "Authentication LDAP"
msgstr "Аутентификация LDAP"

#: authentication.pm:97
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"

#: authentication.pm:98 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "Сервер LDAP"

#: authentication.pm:111 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "простой"

#: authentication.pm:112
#, c-format
msgid "TLS"
msgstr "TLS"

#: authentication.pm:113
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:114
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "слой безопасности (SASL/Kerberos)"

#: authentication.pm:121 authentication.pm:159
#, c-format
msgid "Authentication Active Directory"
msgstr "Аутентификация Active Directory"

#: authentication.pm:122 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Домен"

#: authentication.pm:124 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Сервер"

#: authentication.pm:125
#, c-format
msgid "LDAP users database"
msgstr "База данных пользователей LDAP"

#: authentication.pm:126
#, c-format
msgid "Use Anonymous BIND "
msgstr "Использовать анонимный BIND "

#: authentication.pm:127
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "Пользователю LDAP разрешено просматривать Active Directory"

#: authentication.pm:128
#, c-format
msgid "Password for user"
msgstr "Пароль для пользователя"

#: authentication.pm:140
#, c-format
msgid "Authentication NIS"
msgstr "Аутентификация NIS"

#: authentication.pm:141
#, c-format
msgid "NIS Domain"
msgstr "Домен NIS"

#: authentication.pm:142
#, c-format
msgid "NIS Server"
msgstr "Сервер NIS"

#: authentication.pm:147
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Для того, чтобы это заработало под W2K PDC, вам, возможно, понадобится "
"выполнить под админом: C:\\>net localgroup \"Pre-Windows 2000 Compatible "
"Access\" everyone /add и перезагрузить сервер.\n"
"Вам также понадобится имя_пользователя/пароль администратора домена, чтобы "
"подключить машину к домену Windows(TM).\n"
"Если сеть еще не включена, DrakX попытается подключиться к домену после "
"завершения этапа установки сети.\n"
"Если по какой-то причине эта установка завершилась неудачей и аутентификация "
"в домене не работает, запустите 'smbpasswd -j ДОМЕН -U ПОЛЬЗОВАТЕЛЬ%%"
"ПАРОЛЬ', используя домен и имя_пользователя/пароль своей Windows(tm), после "
"загрузки системы.\n"
"Команда 'wbinfo -t' проверит, насколько секретна ваша аутентификация."

#: authentication.pm:159
#, c-format
msgid "Authentication Windows Domain"
msgstr "Аутентификация домена Windows"

#: authentication.pm:161
#, c-format
msgid "Active Directory Realm "
msgstr "Active Directory Realm "

#: authentication.pm:164
#, c-format
msgid "Domain Admin User Name"
msgstr "Имя пользователя - администратора домена"

#: authentication.pm:165
#, c-format
msgid "Domain Admin Password"
msgstr "Пароль администратора домена"

#: authentication.pm:181
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr "Установить пароль администратора (root) и методы авторизации в сети"

#: authentication.pm:182
#, c-format
msgid "Set administrator (root) password"
msgstr "Установка пароля администратора (root)"

#: authentication.pm:183 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Метод аутентификации"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:188 help.pm:722
#, c-format
msgid "No password"
msgstr "Без пароля"

#: authentication.pm:194
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Этот пароль слишком прост (его длина должна быть не менее %d символов)"

#: authentication.pm:199 network/netconnect.pm:323 network/netconnect.pm:586
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Аутентификация"

#: authentication.pm:331
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Невозможно использовать широковещание без домена NIS"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"

#: bootloader.pm:906
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO с графическим меню"

#: bootloader.pm:907
#, c-format
msgid "LILO with text menu"
msgstr "LILO с текстовым меню"

#: bootloader.pm:908
#, c-format
msgid "GRUB with graphical menu"
msgstr "GRUB с графическим меню"

#: bootloader.pm:909
#, c-format
msgid "GRUB with text menu"
msgstr "GRUB с текстовым меню"

#: bootloader.pm:910
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:987
#, c-format
msgid "not enough room in /boot"
msgstr "не хватает места в /boot"

#: bootloader.pm:1480
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Вы не можете установить начальный загрузчик на раздел %s\n"

#: bootloader.pm:1520
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"Конфигурация вашего начального загрузчика должна быть обновлена по причине "
"изменения номера раздела"

#: bootloader.pm:1533
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Начальный загрузчик не может быть корректно установлен. Вам необходимо "
"загрузиться в режиме rescue и выбрать \"%s\""

#: bootloader.pm:1534
#, c-format
msgid "Re-install Boot Loader"
msgstr "Переустановка начального загрузчика"

#: common.pm:131
#, c-format
msgid "KB"
msgstr "КБ"

#: common.pm:131
#, c-format
msgid "MB"
msgstr "МБ"

#: common.pm:131
#, c-format
msgid "GB"
msgstr "ГБ"

#: common.pm:139
#, c-format
msgid "TB"
msgstr "ТБ"

#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d минут"

#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 минута"

#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d секунд"

#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "отсутствует kdesu"

#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr "отсутствует consolehelper"

#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Австрия"

#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Австралия"

#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Бельгия"

#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Бразилия"

#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Канада"

#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Швейцария"

#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Коста-Рика"

#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Чешская Республика"

#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Германия"

#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Дания"

#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Эстония"

#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Испания"

#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Финляндия"

#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Франция"

#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Греция"

#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Венгрия"

#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Ирландия"

#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Израиль"

#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Италия"

#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Япония"

#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Нидерланды"

#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Норвегия"

#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Новая Зеландия"

#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Польша"

#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Португалия"

#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Россия"

#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Швеция"

#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Словакия"

#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Тайланд"

#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Тайвань"

#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Южная Африка"

#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Соединенные Штаты"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV является протоколом, который позволяет вам локально монтировать "
"директорию веб-сервера, интерпретируя ее как локальную файловую систему (при "
"условии, что веб-сервер настроен как сервер WebDAV). Если вы захотите "
"добавить точки монтирования WebDAV, выберите \"Новая\"."

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Новая"

#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Размонтировать"

#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Монтировать"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Точка монтирования"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Пожалуйста, введите URL сервера WebDAV"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL должен начинаться с  http:// или https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Сервер: "

#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "Точка монтирования:"

#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, c-format
msgid "Options: %s"
msgstr "Параметры: %s"

#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Пожалуйста, сделайте резервную копию данных сначала"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Если вы планируете использовать aboot, не забудьте оставить свободное место "
"(2048 секторов будет достаточно)\n"
"в начале диска"

#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Мастер"

#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Выберите действие"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"У вас есть один большой раздел MS Windows.\n"
"Я предлагаю вам сначала изменить размер раздела\n"
"(выберите его, а затем нажмите \"Изменить размер\")"

#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Пожалуйста, щелкните на раздел"

#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:3065 standalone/drakbackup:3125
#, c-format
msgid "Details"
msgstr "Подробности"

#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Жесткие диски не найдены"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Журналируемая ФС"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Своп"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "Пусто"

#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Типы файловых систем:"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Вместо этого используйте ``%s'' "

#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "Создать"

#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Тип"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Удалить"

#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Используйте сначала ``Размонтировать''"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Выберите другой раздел"

#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Выберите раздел"

#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Выход"

#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Отменить действие"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Переключиться в нормальный режим"

#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Переключиться в режим эксперта"

#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Все-таки продолжить?"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Выйти без сохранения"

#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Выйти без записи таблицы разделов?"

#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Желаете сохранить изменения /etc/fstab"

#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Вам нужно перезагрузиться, чтобы изменения таблицы разделов вступили в силу"

#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Вам следует отформатировать раздел %s.\n"
"Иначе в fstab не будет записи о точке монтирования %s .\n"
"Выйти в любом случае?"

#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Очистить все"

#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Разместить автоматически"

#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "Больше"

#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Информация о жестком диске"

#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Все первичные разделы уже использованы"

#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Добавление новых разделов невозможно"

#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Чтобы получить больше разделов, удалите один, чтобы получить возможность "
"создать расширенный раздел"

#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr "Без супермонтирования"

#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr "С супермонтированием"

#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "Супермонтирование за исключением приводов CDROM"

#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Сохранить таблицу разделов"

#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Восстановить таблицу разделов"

#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Спасти таблицу разделов"

#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Перезагрузить таблицу разделов"

#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Автомонтирование съёмных носителей"

#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Выберите файл"

#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Резервная таблица разделов диска имеет другой размер\n"
"Все-таки продолжить?"

#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Выполняется попытка спасти таблицу разделов"

#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Подробная информация"

#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "Изменить размер"

#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "Форматировать"

#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "Добавить в RAID"

#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "Добавить в LVM"

#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "Удалить из RAID"

#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "Удалить из LVM"

#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "Изменить RAID"

#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "Использовать для loopback"

#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "Создать новый раздел"

#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "Начальный сектор: "

#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "Размер в MB: "

#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "Тип файловой системы: "

#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "Предпочтение: "

#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "Имя логического раздела"

#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Вы не можете создать новый раздел\n"
"(вы достигли максимального количества первичных разделов).\n"
"Сначала удалите первичный раздел и создайте расширенный раздел."

#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "Удалить файл loopback?"

#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"После изменения типа раздела %s, все данные в этом разделе будут потеряны"

#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "Изменить тип раздела"

#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Какую файловую систему желаете?"

#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "переключение с ext2 на ext3"

#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Куда вы хотите примонтировать файл loopback %s?"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Куда вы хотите примонтировать устройство %s?"

#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Невозможно снять точку монтирования, поскольку этот раздел используется для "
"loop back. Удалите сначала loopback"

#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Куда вы хотите примонтировать %s?"

#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Изменение размера"

#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Вычисляются границы файловой системы FAT"

#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "Размер этого раздела нельзя изменить"

#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Для всех данных в этом разделе должна быть сделана резервная копия"

#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"После изменения размера раздела %s все данные в этом разделе будут потеряны"

#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "Выбрать новый размер"

#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "Новый размер в MB: "

#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Для гарантии целостности данных после изменения размера \n"
"раздела(ов), проверка файловой системы будет запущена при\n"
"следующей загрузке в Windows(TM)"

#: diskdrake/interactive.pm:843
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Выберите существующий RAID для добавления"

#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
#, c-format
msgid "new"
msgstr "новый"

#: diskdrake/interactive.pm:860
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Выберите существующий LVM для добавления"

#: diskdrake/interactive.pm:866
#, c-format
msgid "LVM name?"
msgstr "Имя LVM?"

#: diskdrake/interactive.pm:894
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""
"Физический раздел %s используется.\n"
"Желаете ли вы переместить используемые физические области на этом разделе на "
"другие разделы?"

#: diskdrake/interactive.pm:896
#, c-format
msgid "Moving physical extents"
msgstr "Перемещение физических расширений"

#: diskdrake/interactive.pm:914
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Этот раздел не может быть использован для loopback"

#: diskdrake/interactive.pm:927
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback file name: "
msgstr "Имя файла loopback: "

#: diskdrake/interactive.pm:933
#, c-format
msgid "Give a file name"
msgstr "Укажите имя файла"

#: diskdrake/interactive.pm:936
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Файл уже используется другим loopback, выберите другой"

#: diskdrake/interactive.pm:937
#, c-format
msgid "File already exists. Use it?"
msgstr "Файл уже существует. Использовать его?"

#: diskdrake/interactive.pm:960
#, c-format
msgid "Mount options"
msgstr "Параметры монтирования"

#: diskdrake/interactive.pm:967
#, c-format
msgid "Various"
msgstr "Различные"

#: diskdrake/interactive.pm:1034
#, c-format
msgid "device"
msgstr "устройство"

#: diskdrake/interactive.pm:1035
#, c-format
msgid "level"
msgstr "уровень"

#: diskdrake/interactive.pm:1036
#, c-format
msgid "chunk size in KiB"
msgstr "размер куска в KiB"

#: diskdrake/interactive.pm:1053
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Осторожно: эта операция опасна."

#: diskdrake/interactive.pm:1068
#, c-format
msgid "What type of partitioning?"
msgstr "Какой тип разбиения на разделы?"

#: diskdrake/interactive.pm:1106
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Вам необходимо перегрузиться, чтобы изменения вступили в силу"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Таблица разделов устройства %s будет записана на диск!"

#: diskdrake/interactive.pm:1138
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"После форматирования раздела %s, все данные на этом разделе будут потеряны"

#: diskdrake/interactive.pm:1154
#, c-format
msgid "Move files to the new partition"
msgstr "Переместить файлы на новый раздел"

#: diskdrake/interactive.pm:1154 standalone/draksambashare:81
#: standalone/draksambashare:144
#, c-format
msgid "Hide files"
msgstr "Скрыть файлы"

#: diskdrake/interactive.pm:1155
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"В директории %s уже содержатся данные\n"
"(%s)"

#: diskdrake/interactive.pm:1166
#, c-format
msgid "Moving files to the new partition"
msgstr "Недостаточно свободного места для размещения новых разделов"

#: diskdrake/interactive.pm:1170
#, c-format
msgid "Copying %s"
msgstr "Копируется %s"

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Removing %s"
msgstr "Удаляется: %s"

#: diskdrake/interactive.pm:1188
#, c-format
msgid "partition %s is now known as %s"
msgstr "раздел %s теперь известен как %s"

#: diskdrake/interactive.pm:1189
#, c-format
msgid "Partitions have been renumbered: "
msgstr "Разделы изменили свои номера: "

#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
#, c-format
msgid "Device: "
msgstr "Устройство: "

#: diskdrake/interactive.pm:1210
#, c-format
msgid "Devfs name: "
msgstr "Имя devfs:"

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Volume label: "
msgstr "Метка тома: "

#: diskdrake/interactive.pm:1212
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "буква диска DOS: %s (наугад)\n"

#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
#: diskdrake/interactive.pm:1289
#, c-format
msgid "Type: "
msgstr "Тип: "

#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "Имя: "

#: diskdrake/interactive.pm:1227
#, c-format
msgid "Start: sector %s\n"
msgstr "Начало: сектор %s\n"

#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s"
msgstr "Размер: %s"

#: diskdrake/interactive.pm:1230
#, c-format
msgid ", %s sectors"
msgstr ", %s секторов"

#: diskdrake/interactive.pm:1232
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Цилиндр %d до %d\n"

#: diskdrake/interactive.pm:1233
#, c-format
msgid "Number of logical extents: %d\n"
msgstr "Количество логических областей: %d\n"

#: diskdrake/interactive.pm:1234
#, c-format
msgid "Formatted\n"
msgstr "Отформатирован\n"

#: diskdrake/interactive.pm:1235
#, c-format
msgid "Not formatted\n"
msgstr "Не отформатирован\n"

#: diskdrake/interactive.pm:1236
#, c-format
msgid "Mounted\n"
msgstr "Примонтирован\n"

#: diskdrake/interactive.pm:1237
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"

#: diskdrake/interactive.pm:1242
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"Файл(ы) loopback:\n"
"   %s\n"

#: diskdrake/interactive.pm:1243
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Загрузочный раздел по умолчанию\n"
"    (для загрузки MS-DOS, не для lilo)\n"

#: diskdrake/interactive.pm:1245
#, c-format
msgid "Level %s\n"
msgstr "Уровень %s\n"

#: diskdrake/interactive.pm:1246
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "Размер chunk %d KiB\n"

#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-диски %s\n"

#: diskdrake/interactive.pm:1249
#, c-format
msgid "Loopback file name: %s"
msgstr "Имя файла loopback: %s"

#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Есть вероятность, что этот раздел\n"
"является разделом драйвера.\n"
"Лучше вам его не трогать.\n"

#: diskdrake/interactive.pm:1255
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Этот специальный раздел\n"
"Bootstrap предназначен\n"
"для двойной загрузки вашей системы.\n"

#: diskdrake/interactive.pm:1272
#, c-format
msgid "Read-only"
msgstr "Только для чтения"

#: diskdrake/interactive.pm:1273
#, c-format
msgid "Size: %s\n"
msgstr "Размер: %s\n"

#: diskdrake/interactive.pm:1274
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Геометрия: %s цилиндров, %s головок, %s секторов\n"

#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
#, c-format
msgid "Info: "
msgstr "Информация: "

#: diskdrake/interactive.pm:1276
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-диски %s\n"

#: diskdrake/interactive.pm:1277
#, c-format
msgid "Partition table type: %s\n"
msgstr "Тип таблицы разделов: %s\n"

#: diskdrake/interactive.pm:1278
#, c-format
msgid "on channel %d id %d\n"
msgstr "на канале %d id %d\n"

#: diskdrake/interactive.pm:1321
#, c-format
msgid "Filesystem encryption key"
msgstr "Ключ шифрования файловой системы: "

#: diskdrake/interactive.pm:1322
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Выберите ключ шифрования вашей файловой системы"

#: diskdrake/interactive.pm:1325
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Этот ключ шифрования слишком прост (должен быть длиной по крайней мере в %d "
"символов)"

#: diskdrake/interactive.pm:1326
#, c-format
msgid "The encryption keys do not match"
msgstr "Ключи шифрования не совпадают"

#: diskdrake/interactive.pm:1329 network/netconnect.pm:1065
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "Ключ шифрования"

#: diskdrake/interactive.pm:1330
#, c-format
msgid "Encryption key (again)"
msgstr "Ключ шифрования (еще раз)"

#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Алгоритм шифрования"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Изменить тип"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "Невозможно войти под пользователем %s (неверный пароль?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Требуется аутентификация домена"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "Какое имя пользователя"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Еще один"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Пожалуйста, введите свои имя пользователя, пароль и имя домена, чтобы "
"получить доступ к хосту"

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3614
#, c-format
msgid "Username"
msgstr "Имя пользователя"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Поиск серверов"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Поиск новых серверов"

#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Необходимо установить пакет %s. Хотите установить его?"

#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:3925
#, c-format
msgid "Could not install the %s package!"
msgstr "Невозможно установить пакет %s !"

#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Обязательный пакет %s отсутствует"

#: do_pkgs.pm:35 harddrake/sound.pm:274 install_steps_interactive.pm:1317
#: keyboard.pm:388 network/ndiswrapper.pm:95 network/netconnect.pm:472
#: printer/printerdrake.pm:1416 printer/printerdrake.pm:2494
#: printer/printerdrake.pm:2609 printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2937 printer/printerdrake.pm:3924
#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4308
#: printer/printerdrake.pm:5465 standalone/drakTermServ:326
#: standalone/drakTermServ:1205 standalone/drakTermServ:1266
#: standalone/drakTermServ:1935 standalone/drakbackup:510
#: standalone/drakbackup:609 standalone/drakboot:133 standalone/drakclock:224
#: standalone/drakconnect:973 standalone/drakperm:380 standalone/drakperm:390
#: standalone/drakups:27 standalone/harddrake2:511 standalone/harddrake2:527
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Внимание"

#: do_pkgs.pm:35 standalone/harddrake2:527
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "Следующие пакеты должны быть установлены:\n"

#: do_pkgs.pm:205
#, c-format
msgid "Installing packages..."
msgstr "Устанавливаются пакеты..."

#: do_pkgs.pm:252
#, c-format
msgid "Removing packages..."
msgstr "Удаляются пакеты..."

#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "Форматируется раздел %s"

#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "Создается и форматируется файл %s"

#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Не знаю как форматировать %s с типом %s"

#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s форматирование %s завершилось неудачно"

#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Замыкающие монтирования %s\n"

#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr "Монтируется раздел %s"

#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "монтирование раздела %s в каталог %s завершилось неудачно"

#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr "Проверяется %s"

#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "ошибка размонтирования %s: %s"

#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr "Включается раздел swap %s"

#: fs/mount_options.pm:111
#, c-format
msgid "Use an encrypted file system"
msgstr "Использовать шифрованную файловую систему"

#: fs/mount_options.pm:113
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""
"Разрешить подсчет дисковых квот для групп и опционально установку лимитов"

#: fs/mount_options.pm:115
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Не обновлять время доступа к inode на этой файловой системе\n"
"(нужно для более быстрого доступа к спулу новостей для ускорения работы "
"серверов новостей)."

#: fs/mount_options.pm:118
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Может быть примонтировано только явным образом (то есть,\n"
"опция -a  не приведет к монтированию файловой системы)."

#: fs/mount_options.pm:121
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
"Не интерпретировать символьные или специальные блочные устройства в файловой "
"системе."

#: fs/mount_options.pm:123
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Не позволять выполнение любых бинарников на примонтированной\n"
"файловой системе. Эта опция может быть полезна для серверов,\n"
"которые имеют файловые системы, содержащие бинарники для архитектур,\n"
"отличных от их собственной."

#: fs/mount_options.pm:127
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"Не разрешать битам set-user-identifier или set-group-identifier\n"
"вступать в силу. (Это вроде бы безопасно, но на деле будет более безопасно \n"
"если у вас установлен suidperl(1).)"

#: fs/mount_options.pm:131
#, c-format
msgid "Mount the file system read-only."
msgstr "Монтировать файловую систему в режиме только-для-чтения."

#: fs/mount_options.pm:133
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "Все I/O для файловой системы должны быть выполнены синхронно."

#: fs/mount_options.pm:137
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"Разрешить обычному пользователю монтировать файловую систему. Имя\n"
"примонтировавшего пользователя записывается в mtab, чтобы он мог\n"
"затем отмонтировать файловую систему. Эта опция означает опции\n"
"noexec, nosuid, и nodev (если они не перекрыты в той же строке\n"
"другими опциями user,exec,dev,suid)."

#: fs/mount_options.pm:143
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""
"Разрешить подсчет дисковых квот для пользователей и опционально установку "
"лимитов"

#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr "Разрешить запись обычным пользователям"

#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Разрешить доступ только-на-чтение обычным пользователям"

#: fs/type.pm:363
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Вы не можете использовать JFS на разделах менее 16MB"

#: fs/type.pm:364
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Вы не можете использовать ReiserFS на разделах менее 32MB"

#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "с /usr"

#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "сервер"

#: fsedit.pm:217
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Не могу прочитать таблицу разделов на устройстве %s, она слишком повреждена\n"
"для меня :( Я могу попробовать продолжить, очистив плохие разделы (ВСЯ \n"
"ИНФОРМАЦИЯ будет потеряна!). Другой вариант - не разрешать DrakX изменять\n"
"таблицу разделов.\n"
"(ошибка %s)\n"
"\n"
"Вы согласны потерять все свои разделы?\n"

#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Точка монтирования должна начинаться с /"

#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Точки монтирования должны содержать только символы букв и цифр"

#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Уже есть раздел с точкой монтирования %s\n"

#: fsedit.pm:385
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Вы выбрали программный раздел RAID в качестве корневого (/).\n"
"Никакой загрузчик не в состоянии управлять им без раздела /boot.\n"
"Пожалуйста, убедитесь, что раздел /boot добавлен"

#: fsedit.pm:390
#, fuzzy, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""
"Вы не можете использовать логический раздел LVM для точки монтирования %s, "
"так как он распространяется на физические разделы"

#: fsedit.pm:392
#, fuzzy, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
"Вы выбрали логический раздел LVM как root (/).\n"
"Загрузчик не сможет управлять им когда раздел распространяется на физические "
"разделы.\n"
"Вам следует сначала создать раздел /boot"

#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Этот каталог должен оставаться в пределах корневой файловой системы"

#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Для этой точки монтирования требуется реальная файловая система\n"
"(ext2/ext3, reiserfs, xfs или jfs)\n"

#: fsedit.pm:404
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
"Вы не можете использовать зашифрованную файловую систему для точки "
"монтирования %s"

#: fsedit.pm:465
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Недостаточно свободного места для автоматического распределения"

#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr "Нечего выполнять"

#: harddrake/data.pm:62 install_any.pm:1712
#, c-format
msgid "Floppy"
msgstr "Дискета"

#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:88 install_any.pm:1713
#, c-format
msgid "Hard Disk"
msgstr "Диск"

#: harddrake/data.pm:97 install_any.pm:1714
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "Пишущие CD/DVD"

#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:127 standalone/drakbackup:2055
#, c-format
msgid "Tape"
msgstr "Магнитная лента"

#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Видеокарта"

#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr "DVB-карта"

#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "ТВ-карта"

#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Другие устройства мультимедиа"

#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Звуковая карта"

#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Веб-камера"

#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Процессоры"

#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "Адаптеры ISDN"

#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr "USB звуковые устройства"

#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr "Радио-карты"

#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr "ATM сетевые карты"

#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr "WAN сетевые карты"

#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr "Устройства Bluetooth"

#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Карта ethernet"

#: harddrake/data.pm:282 network/netconnect.pm:493
#, c-format
msgid "Modem"
msgstr "Модем"

#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "Адаптеры ADSL"

#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Память"

#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "Контроллеры AGP"

#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:993
#, c-format
msgid "Printer"
msgstr "Принтер"

#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr "Контроллеры игровых портов"

#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Джойстик"

#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "Контроллеры SATA"

#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "Контроллеры RAID"

#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "Контроллеры (E)IDE/ATA"

#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Контроллеры Firewire"

#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "Контроллеры PCMCIA"

#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "Контроллеры SCSI"

#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "Контроллеры USB"

#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "USB порты"

#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "Контроллеры SMBus"

#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "Мосты и системные контроллеры"

#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Клавиатура"

#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr "Планшет и точскрин"

#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
#, c-format
msgid "Mouse"
msgstr "Мышь"

#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "Сканер"

#: harddrake/data.pm:504 standalone/harddrake2:476
#, c-format
msgid "Unknown/Others"
msgstr "Неизвестный/Другие"

#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr "процессор # "

#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Подождите, пожалуйста... Применяются настройки"

#: harddrake/sound.pm:228
#, c-format
msgid "No alternative driver"
msgstr "Альтернативный драйвер отсутствует"

#: harddrake/sound.pm:229
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Для вашей звуковой карты (%s) отсутствует альтернативный драйвер OSS/ALSA, "
"которая в данный момент использует \"%s\""

#: harddrake/sound.pm:235
#, c-format
msgid "Sound configuration"
msgstr "Настройка звука"

#: harddrake/sound.pm:237
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Здесь вы можете выбрать альтернативный драйвер (OSS или ALSA) для своей "
"звуковой карты (%s)"

#. -PO: here the first %s is either "OSS" or "ALSA", 
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:242
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"В настоящий момент ваша карта использует драйвер %s\"%s\" (драйвером по "
"умолчанию для вашей карты является \"%s\")"

#: harddrake/sound.pm:244
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Открытая звуковая система) была первой звуковой API. Она является "
"звуковой API, не зависящей от ОС (доступна на большинстве UNIX-системах), но "
"она все-таки очень простая и ограниченная API.\n"
"Куда уж больше, все драйверы OSS и так заново открывают колесо.\n"
"\n"
"ALSA (Расширенная звуковая архитектура Linux) представляет собой модульную "
"архитектуру, которая поддерживает довольно широкий диапазон ISA, USB и PCI-"
"карт.\n"
"\n"
"Она также предоставляет значительно большую API, чем OSS.\n"
"\n"
"Для поддержки alsa можно использовать:\n"
"- старую api, совместимую с OSS\n"
"- новую api ALSA, предоставляющую много расширенных возможностей, но "
"требующую библиотеку ALSA.\n"

#: harddrake/sound.pm:258 harddrake/sound.pm:346 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Драйвер:"

#: harddrake/sound.pm:266
#, c-format
msgid "Trouble shooting"
msgstr "Поиск и устранение неисправностей"

#: harddrake/sound.pm:274
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"Старый драйвер \"%s\" занесен в черный список.\n"
"\n"
"О нем был создан отчет, чтобы предупредить ядро при выгрузке.\n"
"\n"
"Новый драйвер \"%s\" будет использован только при следующей начальной\n"
"загрузке."

#: harddrake/sound.pm:282
#, c-format
msgid "No open source driver"
msgstr "Нет драйвера с открытым исходным кодом"

#: harddrake/sound.pm:283
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Для вашей звуковой карты (%s) нет свободного драйвера, но имеется "
"собственный драйвер на \"%s\""

#: harddrake/sound.pm:286
#, c-format
msgid "No known driver"
msgstr "Отсутствует известный драйвер"

#: harddrake/sound.pm:287
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Для вашей звуковой карты отсутствует известный драйвер (%s)"

#: harddrake/sound.pm:291
#, c-format
msgid "Unknown driver"
msgstr "Неизвестный драйвер "

#: harddrake/sound.pm:292
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Ошибка: драйвера \"%s\"для вашей звуковой карты нет в списке"

#: harddrake/sound.pm:306
#, c-format
msgid "Sound trouble shooting"
msgstr "Решение проблем со звуком"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:309
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Классическое тестирование ошибок звука выполняется запуском следующих "
"команд:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" сообщит вам, какой драйвер использует ваша "
"карта по умолчанию\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" сообщит вам, какой драйвер\n"
"используется в данный момент\n"
"\n"
"- \"/sbin/lsmod\" позволит вам проверить, загружен ли модуль (драйвер)\n"
"\n"
"- \"/sbin/chkconfig --list sound\" и \"/sbin/chkconfig --list alsa\"\n"
"сообщит вам, были службы sound и alsa настроены для запуска\n"
"на initlevel 3 или нет\n"
"\n"
"- \"aumix -q\" сообщит вам, включена громкость звука или нет\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" сообщит, какая программа использует\n"
"звуковую карту.\n"

#: harddrake/sound.pm:335
#, c-format
msgid "Let me pick any driver"
msgstr "Выбрать другой драйвер"

#: harddrake/sound.pm:338
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Выбор произвольного драйвера"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:341
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Если вы действительно думаете, что сами знаете, какой драйвер является "
"верным\n"
"для вашей карты, вы можете выбрать его из списка сверху.\n"
"\n"
"Текущим драйвером для вашей звуковой карты \"%s\" является \"%s\" "

#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "Автоопределение"

#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Неизвестный|Обычный"

#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Неизвестный|CPH05X (bt878) [большинство производителей]"

#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Неизвестный|CPH06X (bt878) [большинство производителей]"

#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Для большинства современных ТВ-карт модуль bttv ядра GNU/Linux просто "
"автоматически определит правильные параметры.\n"
"Если ваша карта не определилась, то здесь вы можете принудительно включить "
"использование правильных типов тюнера и карты. Если необходимо, просто "
"выберите параметры своей ТВ-карты"

#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "Модель карты :"

#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr "Тип тюнера :"

#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr "Количество буферов захвата :"

#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "количество буферов захвата для mmap'ингового захвата"

#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr "Настройка PLL :"

#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "Поддержка радио :"

#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "включить поддержку радио"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Прежде чем продолжить, вы должны внимательно прочитать условия лицензии.\n"
"Лицензия распространяется на весь дистрибутив Mandriva Linux. Если вы\n"
"согласны со всеми условиями лицензии, отметьте пункт \"%s\". Если нет -\n"
"нажатие на кнопку \"%s\" приведет к перезагрузке вашего компьютера."

#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Принять"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux это многопользовательская система, и это значит, что каждый\n"
"пользователь может иметь свои собственные предпочтения, файлы и так далее.\n"
"Вы можете почитать ``Стартовое руководство пользователя'' чтобы узнать\n"
"больше. В отличии от \"root\", который является администратором,\n"
"пользователи, которых вы добавите здесь, не будут иметь полномочий изменять\n"
"что либо, кроме своих собственных файлов и настроек. Вам необходимо создать\n"
"хотя бы одного обычного пользователя для себя. Это будет аккаунт, который\n"
"вы будете использовать для ежедневной работы. Хоть это и очень практично\n"
"заходить в систему ежедневно как \"root\", это также может быть очень\n"
"опасно! Самая мелкая ошибка может сделать так, что ваша система больше\n"
"работать не будет. Если вы сделаете серьезную ошибку как обычный\n"
"пользователь, вы можете потерять некоторую информацию, но не всю систему.\n"
"\n"
"В первом поле вы должны ввести ваше реальное имя. Это, конечно, не\n"
"обязательно -, так как вы реально можете ввести все что угодно. DrakX\n"
"использует первое слово, которое вы ввели в поле и подставит его как\n"
"\"%s\". Это имя обычный пользователь использует для входа в систему. Вы\n"
"можете изменить его. Затем вам нужно ввести пароль. С точки зрения\n"
"безопасности пароль не-привилегированного (обычного) пользователя не так\n"
"критичен, как пароль \"root\", но нет причин пренебрегать им: в конце\n"
"концов, вы рискуете своими файлами.\n"
"\n"
"Когда вы нажмете \"%s\", вы сможете добавить еще сколько угодно\n"
"пользователей. Создайте пользователя для каждого из своих друзей, для отца\n"
"или сестры, например. Когда вы закончите добавление пользователей, нажмите\n"
"\"%s\".\n"
"\n"
"Нажатие кнопки \"%s\" позволит изменить \"shell\" по умолчанию для этого\n"
"пользователя (по умолчанию это bash).\n"
"\n"
"После того, как все пользователи будут добавлены, вам предложат выбрать\n"
"пользователя, под которым можно будет автоматически входить в систему после\n"
"загрузки. Если вас интересует эта возможность (и вас не заботит локальная\n"
"безопасность), выберите необходимого пользователя и оконный менеджер, затем\n"
"нажмите \"%s\". Если вам не нужна эта возможность, снимите выбор с пункта\n"
"\"%s\""

#: help.pm:51 printer/printerdrake.pm:1866 printer/printerdrake.pm:1987
#: standalone/draksambashare:60
#, c-format
msgid "User name"
msgstr "Имя пользователя"

#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:383 printer/printerdrake.pm:3861
#: standalone/drakTermServ:384 standalone/drakbackup:4074
#: standalone/drakbackup:4168 standalone/drakbackup:4185
#: standalone/drakbackup:4203 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "Далее"

#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Хотите использовать эту возможность?"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Перечисленное выше является существующими разделами Linux, определенными на\n"
"вашем жестком диске. Вы можете оставить без изменений сделанное мастером,\n"
"потому что это хорошо подходит для большинства обычных инсталляций. Если вы\n"
"делаете какие-либо изменения, вы должны определить как минимум раздел root\n"
"(\"/\"). Не делайте его слишком маленьким, иначе вы не сможете\n"
"инсталлировать достаточное количество программного обеспечения. Если вы\n"
"хотите хранить данные на другом разделе, вам также прийдется создать раздел\n"
"\"/home\" (возможно только при наличии более чем одного раздела Linux).\n"
"\n"
"Каждый раздел перечислен следующим образом: : \"Название\", \"Размер\".\n"
"\n"
"\"Название\" разделяется на: \"тип жесткого диска\", \"номер жесткого\n"
"диска\", \"номер раздела\" (например, \"hda1\").\n"
"\n"
"\"Hard drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n"
"SCSI.\n"
"\n"
"\"Номер жесткого диска\" всегда является буквой после \"hd\" или \"sd\".\n"
"Для жестких дисков IDE:\n"
"\n"
" * \"a\" означает \"master жесткий диск на первичном IDE контроллере\";\n"
"\n"
" * \"b\" означает \"slave жесткий диск на первичном IDE контроллере\";\n"
"\n"
" * \"c\" означает \"master жесткий диск на вторичном IDE контроллере\";\n"
"\n"
" * \"d\" означает \"slave жесткий диск на вторичном IDE контроллере\".\n"
"\n"
"Для жестких дисков SCSI, \"a\" означает \"lowest SCSI ID\", а \"b\"\n"
"означает \"second lowest SCSI ID\", и т.д."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Инсталляция Mandriva Linux размещена на нескольких CD-ROMах. Если выбранный\n"
"пакет находится на другом CD-ROM, DrakX будет отдавать текущий CD и просить\n"
"вас вставить другой по мере надобности. Если у вас нет требуемого CD под "
"руками,\n"
"просто нажмите \"%s\", тогда соответствующие пакеты не будут устанавливаться."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"Теперь настало время определить, какие программы вы хотите установить в\n"
"вашу систему. С Mandriva Linux поставляются тысячи пакетов и, для упрощения\n"
"выбора, они разбиты на группы.\n"
"\n"
"Пакеты сортированы по группам, которые соответствуют специфике\n"
"использования вашей машины. В Mandriva Linux пакеты сортируются по четырем\n"
"категориям. Вы можете смешивать и сочетать приложения из различных\n"
"категорий, например, вариант установки ``Рабочая станция'' может иметь\n"
"приложения из категории ``Разработка''.\n"
"\n"
" * \"%s\": если вы собираетесь использовать машину в качестве рабочей\n"
"станции, выберите одну или несколько соответствующих групп из категории\n"
"рабочей станции.\n"
"\n"
" * \"%s\": если вы собираетесь заняться программированием, выберите\n"
"соответствующие группы из этой категории.\n"
"\n"
" * \"%s\": если ваша машина будет работать сервером, выберите какие из\n"
"часто используемых служб вы желаете установить на нее.\n"
"\n"
" * \"%s\": здесь вам нужно выбрать предпочитаемую графическую среду. Хотя\n"
"бы одна из них должна быть выбрана, если вы хотите работать в графическом\n"
"интерфейсе.\n"
"\n"
"При наведении курсора мыши на имя группы будет показываться короткое\n"
"пояснение к данной группе.\n"
"\n"
"ы можете отметить пункт \"%s\", который очень полезен, если вы хорошо\n"
"знаете предлагаемые пакеты, или если вы хотите иметь полный контроль над\n"
"тем, что будет устанавливаться.\n"
"\n"
"Если вы начали инсталляцию в режиме \"%s\", вы можете убрать выбор всех\n"
"групп, чтобы предотвратить инсталляцию какого-либо нового пакета. Это\n"
"полезно в случае восстановления или обновления существующей системы.\n"
"\n"
"Если вы не выберете ни одной группы в процессе\n"
"выполнения обычной инсталляции (не касается обновления), появится диалог с\n"
"различными опциями для минимальной инсталляции:\n"
"\n"
" * \"%s\": инсталлировать минимальный набор пакетов, необходимых для работы\n"
"графического рабочего стола.\n"
"\n"
" * \"%s\": установить основную систему плюс базовые утилиты и документацию\n"
"к ним. Эта инсталляция подходит для установки сервера.\n"
"\n"
" * \"%s\": будет установлен самый необходимый минимум пакетов для работы\n"
"Linux системы. В это варианте вы сможете работать только в режиме командной\n"
"строки. Общий размер этой установки занимает 65 мегабайт."

#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Рабочая станция"

#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Разработка"

#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Графическая среда"

#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr "Выбор отдельных пакетов"

#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Обновление"

#: help.pm:146 install_steps_interactive.pm:604
#, c-format
msgid "With X"
msgstr "Вместе с Х"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "С базовой документацией"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Самая минимальная установка"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"Если вы сообщили инсталлятору, что вы хотите самостоятельно выбрать пакеты,\n"
"тогда он покажет вам дерево, содержащее все пакеты, разделенные по группам\n"
"и подгруппам. Во время просмотра дерева вы можете выбирать группы\n"
"полностью, подгруппы или отдельные пакеты.\n"
"\n"
"Когда вы выбираете пакет в дереве, справа появляется его описание, чтобы\n"
"помочь вам узнать назначение этого пакета.\n"
"\n"
"!! Если был выбран какой-либо серверный пакет, специально или он был частью\n"
"какой-либо группы, вас попросят подтвердить, действительно ли вы желаете\n"
"установить эти сервера. Под Mandriva Linux все установленные сервера\n"
"запускаются по умолчанию в процессе загрузки. Даже если они безопасны и не\n"
"имеют известных проблем на момент выпуска дистрибутива, в них могут быть\n"
"обнаружены дыры в безопасности после выпуска данной версии Mandriva Linux.\n"
"Если вы не знаете, зачем нужен данная служба и что она делает, нажмите\n"
"\"%s\". Если вы нажмете \"%s\", тогда все службы из списка будут\n"
"установлены и автоматически запущены при загрузке системы. !!\n"
"\n"
"Опция \"%s\" запрещает показ диалога предупреждения, который появляется при\n"
"автоматическом выборе пакетов инсталлятором. Некоторые пакеты имеют\n"
"взаимосвязь друг с другом, поэтому инсталлятору может потребоваться\n"
"установить некоторые дополнительные программы. Инсталлятор сам определит,\n"
"какие пакеты нужны для удовлетворения зависимостей, чтобы успешно выполнить\n"
"установку.\n"
"\n"
"Маленькая иконка дискеты внизу под списком позволяет загрузить выбранный и\n"
"записанный во время предыдущей инсталляции список пакетов. Если вы нажмете\n"
"на эту иконку, вас попросят вставить в дисковод дискету, созданную\n"
"предыдущей инсталляцией. Смотрите второй совет последнего шага, где описано\n"
"как создать такой диск."

#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:946
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2613
#: standalone/draksec:54 standalone/harddrake2:332 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "Нет"

#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:946 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2613
#: standalone/draksec:55 standalone/harddrake2:331 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Да"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "Автоматические зависимости"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": по нажатию на кнопку \"%s\" откроется мастер настройки принтера.\n"
"Прочитайте соответствующую главу в книге ``Стартовое руководство\n"
"пользователя'', чтобы узнать как установить новый принтер. Представленный\n"
"там интерфейс подобен используемому в процессе установки."

#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2437 standalone/drakbackup:2441
#: standalone/drakbackup:2445 standalone/drakbackup:2449
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "Настройка"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Этот диалог используется для выбора служб, которые должны стартовать при\n"
"загрузке системы.\n"
"\n"
"DrakX предоставит список всех служб, которые доступны при настройках\n"
"текущей инсталляции. Пересмотрите их внимательно и уберите все, которые не\n"
"являются необходимыми для старта во время загрузки системы.\n"
"\n"
"Вы можете получить короткие пояснения относительно службы, выбрав ее в\n"
"списке. Однако, если вы не уверены, полезна служба или нет, лучше всего\n"
"оставить как было по умолчанию.\n"
"\n"
"!! На этом этапе будьте предельно внимательны, если ваша машина будет\n"
"сервером: возможно вы не захотите запускать службы, которые вам не нужны.\n"
"Пожалуйста помните, что некоторые службы потенциально опасны для сервера.\n"
"В общем, оставьте только те службы, которые вам действительно нужны. !!"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux управляет временем в GMT (Greenwich Mean Time) и транслирует его\n"
"в локальное согласно выбранного вами часового пояса. Если часы на вашей\n"
"материнской плате установлены в локальное время, вы можете деактивировать\n"
"это, убрав выбор \"%s\", что позволит GNU/Linux помнить, что системные часы\n"
"и аппаратные часы принадлежат разным часовым поясам. Это полезно в случае,\n"
"когда на машине размещена другая операционная система типа Windows.\n"
"\n"
"Опция \"%s\" позволит автоматически подстраивать часы, соединяясь с\n"
"удаленным сервером в Интернет. Естественно, чтобы это работало, вам\n"
"необходимо соединение с Интернет. Лучше всего выбрать ближайший к вам\n"
"сервер времени. Эта опция устанавливает на вашу машину сервер времени,\n"
"который опционально может использоваться другими машинами в вашей локальной\n"
"сети."

#: help.pm:217 install_steps_interactive.pm:888
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Аппаратные часы выставлены по GMT"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Автоматическая синхронизация времени"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Видеокарта\n"
"\n"
"   Инсталлятор обычно автоматически определяет и настраивает видеокарту,\n"
"установленную в вашей машине. Если это не так, вы можете выбрать в этом\n"
"списке карту, которая у вас действительно установлена.\n"
"\n"
"   В случае, когда для вашей карты доступны различные сервера, с 3D\n"
"ускорением и без, вам предложат выбрать, какой сервер больше соответствует\n"
"вашим потребностям."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X (для системы X Window) это сердце графического интерфейса GNU/Linux, на\n"
"базе которого работают все графические среды (KDE, GNOME, AfterStep,\n"
"WindowMaker, и т.д..), входящие в Mandriva Linux.\n"
"\n"
"Вам будет представлен список различных параметров для получения\n"
"оптимального графического отображения: Видеокарта\n"
"\n"
"   Инсталлятор обычно автоматически определяет и настраивает видеокарту,\n"
"установленную в вашей машине. Если это не так, вы можете выбрать в этом\n"
"списке карту, которая у вас действительно установлена.\n"
"\n"
"   В случае, когда для вашей карты доступны различные сервера, с 3D\n"
"ускорением и без, вам предложат выбрать, какой сервер больше соответствует\n"
"вашим потребностям.\n"
"\n"
"\n"
"\n"
"Монитор\n"
"\n"
"   Инсталлятор обычно может автоматически определить и настроить монитор,\n"
"подключенный к вашей машине. Если ему это не удалось, вы можете\n"
"самостоятельно выбрать ваш монитор из списка.\n"
"\n"
"\n"
"\n"
"Разрешение\n"
"\n"
"   Здесь вы можете выбрать разрешение и глубину цвета из того, что доступно\n"
"для вашего оборудования. Выберите то, что вам больше подходит (вы сможете\n"
"это изменить после инсталляции). Пример выбранной конфигурации отображается\n"
"на мониторе.\n"
"\n"
"\n"
"\n"
"Проверить\n"
"\n"
"   В зависимости от вашего оборудования, данный пункт может либо появляться\n"
"либо отсутствовать.\n"
"\n"
"   Система попытается открыть графический экран в выбранном разрешении.\n"
"Если вы сможете увидеть сообщение во время проверки и ответить \"%s\",\n"
"тогда DrakX перейдет к следующему шагу. Если вы не увидите сообщения, это\n"
"значит, что часть определенной автоматически конфигурации была неверна и\n"
"проверка автоматически завершится через 12 секунд, вернув вас в меню.\n"
"Поправьте настройки и проверьте заново, пока вы не получите корректное\n"
"графическое изображение.\n"
"\n"
"\n"
"\n"
"Параметры\n"
"\n"
"   Здесь вы можете настроить вашу машину на автоматическую загрузку в\n"
"графическом интерфейсе. Очевидно, что вам следует выбрать \"%s\", если ваша\n"
"машина будет работать в качестве сервера или вам не удалось настроить\n"
"графический режим."

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Монитор\n"
"\n"
"   Инсталлятор обычно может автоматически определить и настроить монитор,\n"
"подключенный к вашей машине. Если ему это не удалось, вы можете\n"
"самостоятельно выбрать ваш монитор из списка."

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Разрешение\n"
"\n"
"   Здесь вы можете выбрать разрешение и глубину цвета из того, что доступно\n"
"для вашего оборудования. Выберите то, что вам больше подходит (вы сможете\n"
"это изменить после инсталляции). Пример выбранной конфигурации отображается\n"
"на мониторе."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"В случае, когда для вашей карты доступны различные сервера, с 3D ускорением\n"
"и без, вам предложат выбрать, какой сервер больше соответствует вашим\n"
"потребностям."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"Параметры\n"
"\n"
"   Здесь вы можете настроить вашу машину на автоматическую загрузку в\n"
"графическом интерфейсе. Очевидно, что вам следует выбрать \"%s\", если ваша\n"
"машина будет работать в качестве сервера или вам не удалось настроить\n"
"графический режим."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"На этом шаге вам прийдется решить, куда вы хотите установить операционную\n"
"систему Mandriva Linux на вашем жестком диске. Если ваш жесткий диск пуст,\n"
"или существующая операционная система на нем занимает все дисковое\n"
"пространство, вам прийдется диск переразбить (partition). Разделение диска\n"
"в основном состоит в том, чтобы логически выделить на нем свободное\n"
"пространство для установки вашей новой системы Mandriva Linux.\n"
"\n"
"Поскольку разделение диска - это обычно необратимый процесс и может\n"
"привести к потере данных, если на диске уже есть установленная операционная\n"
"система, то для начинающего пользователя это несколько напряженный и\n"
"пугающий момент. К счастью, в DrakX существует мастер, упрощающий этот\n"
"процесс. Пожалуйста, прочтите руководство перед началом и не торопитесь.\n"
"\n"
"В зависимости от конфигурации вашего жесткого диска, доступно несколько\n"
"параметров:\n"
"\n"
" * \"%s\": эта опция означает автоматическое разделение пустого диска или\n"
"дисков. Если вы выбираете эту опцию, то далее вопросов задаваться не будет;\n"
"\n"
" * \"%s\": мастер определил наличие существующих разделов Linux на вашем\n"
"жестком диске. Если вы собираетесь их использовать, выберите эту опцию. Вас\n"
"попросят указать точки монтирования для каждого раздела. По умолчанию\n"
"выбираются традиционные точки монтирования и вы можете вообще их не менять.\n"
"\n"
" * \"%s\": если на вашем жестком диске установлена и занимает все доступное\n"
"место Microsoft Windows, вам нужно будет создать свободное место для данных\n"
"Linux. Чтобы это сделать, вы можете удалить ваш Microsoft Windows раздел и\n"
"данные (см. решение `` Очистить весь диск'') или изменить размер раздела\n"
"FAT или NTFS Microsoft Windows. Изменение размера может проводиться без\n"
"потери данных, особенно если вы предварительно провели дефрагментацию\n"
"раздела Windows. Резервное копирование ваших данных настойчиво\n"
"рекомендуется.. Рекомендуем выбрать эту опцию, если вы собираетесь\n"
"использовать Mandriva Linux и Microsoft Windows на одном компьютере.\n"
"\n"
"   Перед тем, как выбрать эту опцию, вы должны осознать, что размер вашего\n"
"раздела Microsoft Windows станет меньше, чем был. У вас будет меньше\n"
"свободного места под Microsoft Windows для хранения данных и инсталляции\n"
"новых программ.\n"
"\n"
" * \"%s\" выберите эту опцию, если вы хотите удалить все данные на всех\n"
"разделах вашего жесткого диска и заменить их новой системой Mandriva Linux.\n"
"Будьте осторожны в этом решении, потому что после подтверждения вы не\n"
"сможете вернуть обратно все как было.\n"
"\n"
"   !! Если вы выбираете эту опцию, все данные на вашем жестком диске будут\n"
"удалены. !!\n"
"\n"
" * \"%s\": эта опция позволит просто удалить всю информацию на диске и\n"
"начать создание разделов диска на пустом месте. Вся информация на вашем\n"
"диске будет утеряна.\n"
"\n"
"   !! Если вы выберете эту опцию, все данные на вашем диске будут потеряны.\n"
"!!\n"
"\n"
" * \"%s\": выберите эту опцию, если вы желаете разбить ваш диск вручную.\n"
"Будьте осторожны -- это мощная и одновременно опасная возможность. Вы\n"
"запросто можете потерять все данные. Поэтому выбор этой опции рекомендуется\n"
"только в том случае, если вы уже делали что либо подобное раньше и имеете\n"
"некоторый опыт. Чтобы узнать, как использовать утилиту DiskDrake,\n"
"обратитесь к разделу ``Управление разделами диска'' книги ``Стартовое\n"
"руководство пользователя''."

#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Использовать свободное место"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Использовать существующий раздел"

#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Использовать свободное место на разделе Windows"

#: help.pm:374
#, c-format
msgid "Erase entire disk"
msgstr "Очистить весь диск"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Удалить Windows"

#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Ручная разметка диска"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"И вот вы здесь. Установка завершена, и ваша система GNU/Linux готова к\n"
"использованию. Просто нажмите \"%s\", чтобы перезагрузить систему. Первое,\n"
"что вы увидите после того, как ваш компьютер закончит тестирование\n"
"оборудования, это меню начального загрузчика, предоставляющее вам выбор\n"
"какую операционную систему загрузить.\n"
"\n"
"Кнопка \"%s\" покажет еще две кнопки:\n"
"\n"
" * \"%s\": для создания инсталляционной дискеты, с помощью которой можно\n"
"автоматически провести инсталляцию, подобную только что проведенной, без\n"
"участия оператора.\n"
"\n"
"   Обратите внимание, что после нажатия на кнопку доступны два различных\n"
"варианта:\n"
"\n"
"    * \"%s\": это частично автоматизированная установка, в которой только\n"
"шаг разметки диска (и только он один) требует участия.\n"
"\n"
"    * \"%s\": полностью автоматическая инсталляция: жесткий диск полностью\n"
"перезаписывается и все данные теряются.\n"
"\n"
"   эта возможность очень удобна, когда нужно повторять инсталляцию на\n"
"большом числе одинаковых машин. Смотрите раздел Auto install на нашем web\n"
"сайте, чтобы получить больше информации.\n"
"\n"
" * \"%s\": сохраняет выбор пакетов, сделанный в данной инсталляции. Для\n"
"использования своей выборки пакетов для другой установки, вставьте дискету\n"
"в дисковод и запустите установку. В приглашении нажмите [F1] и наберите\n"
">>linux defcfg=\"floppy\"<<."

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Создать дискету автоматической установки"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Replay"
msgstr "Повторить"

#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Automated"
msgstr "Автоматический"

#: help.pm:409 install_steps_interactive.pm:1346
#, c-format
msgid "Save packages selection"
msgstr "Сохранить выбор пакетов"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Все вновь созданные разделы должны быть отформатированы для того, чтобы их\n"
"можно было использовать (форматирование означает создание файловой\n"
"системы).\n"
"\n"
"На этом этапе у вас есть возможность переформатировать уже существующие\n"
"разделы, чтобы стереть все данные, которые они содержат. Если вам это\n"
"нужно, тогда выберите и эти разделы.\n"
"\n"
"Пожалуйста, имейте в виду, что нет необходимости переформатировать все\n"
"существовавшие ранее разделы. Вы должны переформатировать разделы,\n"
"содержащие операционную систему (такие, как \"/\", \"/usr\" или \"/var\"),\n"
"но вам совсем не обязательно форматировать разделы, на которых содержатся\n"
"данные, которые вы хотели бы сохранить (обычно это \"/home\").\n"
"\n"
"Пожалуйста, будьте осторожны при выборе разделов. После форматирования все\n"
"данные на выбранных разделах будут удалены и вы не сможете их восстановить.\n"
"\n"
"Нажмите \"%s\", когда будете готовы начать форматирование разделов.\n"
"\n"
"Нажмите \"%s\", если вы хотите выбрать другой раздел для установки\n"
"Mandriva Linux.\n"
"\n"
"Нажмите \"%s\", если хотите выбрать разделы, которые следует проверить на\n"
"сбойные блоки (bad blocks)."

#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3859
#: standalone/drakTermServ:363 standalone/drakbackup:4037
#: standalone/drakbackup:4073 standalone/drakbackup:4184
#: standalone/drakbackup:4199 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "Назад"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"В данный момент установки Mandriva Linux было бы неплохо обновить некоторые\n"
"пакеты из исходного релиза. Некоторые баги могут быть уже исправлены и\n"
"решены проблемы безопасности. Чтобы получить пользу от этих обновлений,\n"
"сейчас вы можете загрузить их из Интернет. Нажмите \"%s\", если у вас есть\n"
"работающее соединение с Интернет, или \"%s\", если вы хотели бы обновить\n"
"пакеты позже.\n"
"\n"
"При выборе \"%s\" появится список мест, из которых можно получить\n"
"обновления. Выберите ближайший к вам сервер. Затем появится дерево выбора\n"
"пакетов: просмотрите список и нажмите \"%s\" для получения и установки\n"
"выбранных пакетов, или \"%s\" для отмены."

#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157
#, c-format
msgid "Install"
msgstr "Установить"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"На этом этапе DrakX позволит вам выбрать для машины желаемый уровень\n"
"безопасности. Как правило, уровень безопасности должен быть выше, если на\n"
"машине содержатся критические данные или машина непосредственно подключена\n"
"к Интернет. Однако, более высокий уровень безопасности, в общем случае,\n"
"достигается в обмен на удобство использования.\n"
"\n"
"Если вы не знаете что выбрать, оставьте выбор по умолчанию. Вы сможете\n"
"изменить этот уровень безопасности потом с помощью утилиты draksec из\n"
"Mandriva Linux Control Center.\n"
"\n"
"В поле \"%s\" системе указывается пользователь, который будет отвечать за\n"
"безопасность. На этот адрес будут посылаться сообщения по безопасности."

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Администратор по безопасности"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Здесь вам предложат выбрать, какие разделы будут использоваться для\n"
"установки вашей системы Mandriva Linux. Если разделы были уже определены\n"
"ранее, например, предыдущей инсталляцией GNU/Linux или другой утилитой\n"
"разбиения дисков, вы можете воспользоваться существующими разделами. В\n"
"противном случае, разделы жесткого диска должны быть определены.\n"
"\n"
"Для создания разделов сначала выберите жесткий диск. Это можно сделать,\n"
"выбрав ``hda'' для первого IDE устройства, ``hdb'' для второго, ``sda'' для\n"
"первого SCSI устройства и так далее.\n"
"\n"
"Для разметки выбранного жесткого диска вы можете использовать следующие\n"
"опции:\n"
"\n"
" * \"%s\": эта опция удаляет все разделы на выбранном жестком диске;\n"
"\n"
" * \"%s\": эта опция позволяет автоматически создать ext3 и swap разделы на\n"
"свободном пространстве вашего жесткого диска.\n"
"\n"
"\"%s\": открывает доступ к дополнительным возможностям:\n"
"\n"
" * \"%s\": сохраняет таблицу разделов на дискету. Полезно для\n"
"восстановления таблицы разделов в будущем. Очень рекомендуется произвести\n"
"этот шаг.\n"
"\n"
" * \"%s\": позволяет восстановить таблицу разделов, ранее сохраненную на\n"
"дискету.\n"
"\n"
" * \"%s\": если ваша таблица разделов испорчена, вы можете попытаться ее\n"
"восстановить, используя эту опцию. Пожалуйста, будьте осторожны и помните,\n"
"что это может и не получиться.\n"
"\n"
" * \"%s\": отменяет все изменения и загружает исходную таблицу разделов.\n"
"\n"
" * \"%s\": если не выбрать эту опцию, то пользователи будут вынуждены\n"
"вручную монтировать и размонтировать съемные носители типа дискет и\n"
"CD-ROMов.\n"
"\n"
" * \"%s\": используйте эту опцию, если вы желаете провести разметку диска с\n"
"помощью мастера. Это рекомендуется тем, кто не имеет достаточного опыта в\n"
"разбиении дисков.\n"
"\n"
" * \"%s\": используйте эту опцию для отмены ваших изменений.\n"
"\n"
" * \"%s\": позволяет производить дополнительные действия над разделами\n"
"(тип, опции, формат) и предоставляет больше информации о жестком диске.\n"
"\n"
" * \"%s\": когда вы закончите разметку своего жесткого диска, нажмите сюда\n"
"чтобы сохранить изменения на диск.\n"
"\n"
"При определении размера раздела, вы можете установить размер раздела,\n"
"используя клавиши со стрелками на вашей клавиатуре.\n"
"\n"
"Замечание: вы можете добраться до любой из опций используя клавиатуру.\n"
"Перемещайтесь по ним, используя клавишу [Tab] и стрелки [Up/Down].\n"
"\n"
"Когда раздел выбран, вы можете использовать:\n"
"\n"
" * Ctrl-c для создания нового раздела (когда выбран пустой раздел)\n"
"\n"
" * Ctrl-d для удаления раздела\n"
"\n"
" * Ctrl-m для установки точки монтирования\n"
"\n"
"Чтобы получить информацию о различных доступных файловых системах,\n"
"пожалуйста почитайте главу ext2FS из книги ``Справочное руководство''.\n"
"\n"
"Если вы производите инсталляцию на PPC машину, вам потребуется создать\n"
"маленький HFS ``bootstrap'' раздел, не больше 1MB, который будет\n"
"использоваться загрузчиком yaboot. Если вы решите сделать раздел чуть\n"
"больше, скажем 50MB, то вы найдете полезное место для хранения spare kernel\n"
"и ramdisk образов для загрузки в аварийных ситуациях."

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Автомонтирование съемных носителей"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Переключение между нормальным/экспертным режимами"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"На вашем жестом диске обнаружено несколько разделов Microsoft. Выберите\n"
"необходимый раздел для изменения его размера с целью установки вашей новой\n"
"операционной системы Mandriva Linux.\n"
"\n"
"Каждый раздел перечислен так: \"Linux имя\", \"Windows имя\" \"Размер\".\n"
"\n"
"\"Linux имя\" разделено на: \"тип жесткого диска\", \"номер жесткого\n"
"диска\", \"номер раздела\" (например, \"hda1\").\n"
"\n"
"\"Тип жесткого диска\" это \"hd\" если ваш жесткий диск IDE и \"sd\" если\n"
"SCSI.\n"
"\n"
"\"Номер жесткого диска\" это всегда буква после \"hd\" или \"sd\". Для\n"
"жестких дисков IDE:\n"
"\n"
" * \"a\" означает \"master жесткий диск на первичном IDE контроллере\";\n"
"\n"
" * \"b\" означает \"slave жесткий диск на первичном IDE контроллере\";;\n"
"\n"
" * \"c\" означает \"master жесткий диск на вторичном IDE контроллере\";\n"
"\n"
" * \"d\" означает \"slave жесткий диск на вторичном IDE контроллере\".\n"
"\n"
"Для жестких дисков SCSI \"a\" означает \"lowest SCSI ID\", \"b\" означает\n"
"\"second lowest SCSI ID\", и т.д.\n"
"\n"
"\"Windows name\" это буква жесткого диска под Windows (первый диск или\n"
"раздел называется \"C:\")."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\": проверьте текущий выбор страны Если вы находитесь не в этой стране,\n"
"нажмите на кнопку \"%s\" и выберите другую. Если ваша страна не\n"
"присутствует в первом показанном списке, нажмите кнопку \"%s\", чтобы\n"
"увидеть полный список."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
"Этот шаг появляется только в случае, если на вашей машине найден старый\n"
"раздел GNU/Linux.\n"
"\n"
"DrakX теперь должен узнать, хотите ли вы провести новую установку или\n"
"обновление существующей системы Mandriva Linux:\n"
"\n"
" * \"%s\": в большинстве случаев этот вариант приведет к уничтожению старой\n"
"системы. Если вы желаете изменить разделы вашего жесткого диска или\n"
"изменить файловую систему, вы должны выбрать этот пункт. Однако, в\n"
"зависимости от того, как разбит ваш диск, вам, возможно, удастся сохранить\n"
"от перезаписи некоторые свои данные.\n"
"\n"
" * \"%s\": этот класс установки позволит вам обновить пакеты, установленные\n"
"в вашей системе Mandriva Linux. Текущая схема разделов диска и\n"
"пользовательские данные останутся нетронутыми. Большинство других шагов\n"
"будут доступны, как и при стандартной установке.\n"
"\n"
"``Обновление'' будет неплохо работать на системах Mandriva Linux начиная с\n"
"\"8.1\" и выше. Проведение обновления на системах Mandriva Linux старше\n"
"\"8.1\" не рекомендуется."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"В зависимости от языка по умолчанию, который вы выбрали в разделе , DrakX\n"
"автоматически подберет определенную конфигурацию клавиатуры. Проверьте, что\n"
"выбор вам подходит или выберите другую раскладку клавиатуры.\n"
"\n"
"Может так быть, что у вас нет клавиатуры, которая точно соответствует\n"
"вашему языку: например, если вы швейцарец, говорящий по-английски, у вас\n"
"может быть швейцарская клавиатура. Или вы говорите по-английски, но живете\n"
"в Квебеке; тогда вы можете попасть в подобную в ситуацию, когда ваш родной\n"
"язык и клавиатура не совпадают. В любом случае, этот шаг установки позволит\n"
"вам выбрать подходящую клавиатуру из списка.\n"
"\n"
"Нажмите на кнопку \"%s\" чтобы получить полный список поддерживаемых\n"
"клавиатур.\n"
"\n"
"Если вы выбираете раскладку клавиатуры, основанную на не-латинском\n"
"алфавите, следующее диалоговое окно позволит вам выбрать сочетание клавиш\n"
"для переключения между латинской и не-латинской раскладками."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"Ваш выбор предпочитаемого языка повлияет на язык документации, сам\n"
"инсталлятор и систему в целом. Выберите сначала регион, в котором вы\n"
"находитесь, затем язык на котором вы говорите.\n"
"\n"
"По нажатию на кнопку \"%s\" вы сможете выбрать другие языки, которые можно\n"
"установить на вашей рабочей станции. Таким образом будут установлены\n"
"имеющие отношение к языку файлы системной документации и приложения.\n"
"Например, если у вас в системе будут работать пользователи из Испании,\n"
"выберите в дереве English как основной, и \"%s\" в дополнительном разделе.\n"
"\n"
"О поддержке UTF-8 (unicode): Unicode это новая кодировка, которая включает\n"
"в себя все существующие языки. Однако ее полная поддержка в GNU/Linux пока\n"
"находится в стадии разработки. Поэтому Mandriva Linux будет определять\n"
"использовать ее или нет в зависимости от выбора пользователя:\n"
"\n"
" * Если вы выбираете языки, которые имеют свою традиционную устоявшуюся\n"
"кодировку (языки latin1, русский, японский, китайский, корейский, тайский,\n"
"греческий, турецкий, большинство языков с iso-8859-2), будет взята по\n"
"умолчанию их кодировка;\n"
"\n"
" * Для остальных языков будет использоваться юникод по умолчанию;\n"
"\n"
" * Если выбираются несколько языков, имеющих различную кодировку, будет\n"
"использован юникод по умолчанию для всей системы;\n"
"\n"
" * И наконец, юникод может быть также выбран по запросу пользователя,\n"
"опцией \"%s\" не зависимо от того, какие языки выбраны.\n"
"\n"
"Заметим, что вы не ограничены в выборе дополнительных языков. Вы можете\n"
"выбрать сколько угодно дополнительных языков, даже установить все языки,\n"
"отметив пункт \"%s\". Выбор поддержки языка означает наличие переводов,\n"
"шрифтов, проверку орфографии и т.д. для установленных языков.\n"
"\n"
"Для переключения между различными установленными языками в вашей системе вы\n"
"можете запускать команду \"/usr/sbin/localedrake\" с правами \"root\",\n"
"чтобы изменить язык для всей системы. Запуск этой команды с правами\n"
"обычного пользователя позволит изменить настройки языка для данного\n"
"конкретного пользователя."

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Испанский"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"Обычно у DrakX не возникает проблем с определением количества кнопок вашей\n"
"мыши. Если все-таки у него это не получается, тогда он будет рассматривать\n"
"вашу мышь как двух-кнопочную и настроит эмуляцию трех кнопок. Третья кнопка\n"
"двухкнопочной мыши может быть ``нажата'' одновременным нажатием на левую и\n"
"правую кнопку. DrakX автоматически определит какой интерфейс использует\n"
"ваша мышь: PS/2, serial или USB.\n"
"\n"
"Если у вас трехкнопочная мышь с колесиком, вы можете выбрать мышь \"%s\"\n"
"DrakX тогда настроит вашу мышь с симуляцией колесика. Чтобы воспользоваться\n"
" затем колесиком, нажимайте среднюю кнопку мыши и двигайте указатель мыши\n"
"вверх-вниз.\n"
"\n"
"Если, по каким-либо причинам, вы желаете указать другой тип мыши, выберите\n"
"нужную мышь из предоставленного списка.\n"
"\n"
"Вы можете выбрать пункт \"%s\" для выбора типа мыши ``generic'', который "
"будет\n"
"работать практически с любой мышью.\n"
"\n"
"Если вы выбираете другую мышь, отличную от выбранной по умолчанию, появится\n"
"тестовый экран. Понажимайте кнопки и покрутите колесико для проверки\n"
"правильности настроек и того, что мышь работает корректно. Если мышь ведет\n"
"себя неверно, нажмите пробел или клавишу [Return], чтобы отменить\n"
"тестирование и вернуться к списку мышей.\n"
"\n"
"Мыши с колесиками иногда автоматически не определяются. В этом случае вам\n"
"прийдется выбрать свою мышь из списка. Проверьте, что вы правильно выбрали\n"
"порт подключения мыши. Когда мышь будет выбрана и нажата кнопка \"%s\",\n"
"появится картинка с изображением мыши. Покрутите колесико мыши для проверки\n"
"того, что все работает правильно. Как только вы увидите, что колесико на\n"
"экране движется синхронно с движениями настоящего колесика, проверьте также\n"
"работу кнопок и движение курсора, который должен двигаться по экрану\n"
"соответственно вашим перемещениям мыши."

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "с эмуляцией колесика"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Универсальный |Любая PS/2 & USB мышь"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Пожалуйста, выберите правильный порт. Например, порт \"COM1\" под Windows\n"
"называется \"ttyS0\" под GNU/Linux."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"Это самое важное решение в деле безопасности вашей системы GNU/Linux: вы\n"
"должны ввести пароль \"root\". \"Root\" является администратором системы, и\n"
"только он имеет право производить обновления, добавлять пользователей,\n"
"изменять конфигурацию системы и так далее. Короче говоря, \"root\" может\n"
"все! Вот поэтому вы должны придумать пароль, который трудно подобрать -\n"
"DrakX сообщит вам, если пароль слишком прост. Как вы видите, можно вообще\n"
"не вводить пароль, но мы серьезно советуем вам этого не делать по одной\n"
"простой причине: не думайте, что если вы загрузили GNU/Linux, то ваши\n"
"остальные операционные системы защищены от ошибок. Так как \"root\" может\n"
"переступить все ограничения и непреднамеренно стереть все данные на\n"
"разделах диска, обращаясь небрежно с разделами, то очень важно, чтобы стать\n"
"\"root\" было трудно.\n"
"\n"
"Пароль должен быть сочетанием цифровых и буквенных символов и иметь длину\n"
"не менее 8 символов. Никогда не записывайте пароль \"root\" - это делает\n"
"очень легкой возможность скомпрометировать систему.\n"
"\n"
"Одно предостережение -- не делайте пароль слишком длинным или слишком\n"
"сложным, потому что вы должны его без особых усилий запомнить!\n"
"\n"
"Пароль не будет отображаться на экране так же, как вы его вводите. Кроме\n"
"того, вам прийдется повторить ввод пароля, чтобы предупредить возможность\n"
"опечатки. Если случится так, что вы опечатались дважды, тогда этот\n"
"``неверный'' пароль прийдется использовать при первой загрузке.\n"
"\n"
"Если вы желаете, чтобы доступ к этому компьютеру контролировался сервером\n"
"аутентификации, нажмите на кнопку \"%s\".\n"
"\n"
"Если ваша сеть использует службы аутентификации LDAP, NIS или PDC Windows\n"
"Domain выберите соответствующий тип \"%s\". Если не знаете что выбрать,\n"
"спросите своего администратора сети.\n"
"\n"
"Если у вас возникли проблемы с запоминанием паролей, вы можете выбрать\n"
"опцию \"%s\", если ваш компьютер не будет подключаться к Интернет и если вы\n"
"доверяете всем доступ к своей машине."

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "аутентификация"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
"LILO и GRUB -- это начальные загрузчики GNU/Linux. Этот шаг обычно\n"
"полностью автоматизирован. DrakX проанализирует загрузочный (boot) сектор\n"
"диска и будет действовать согласно тому, что он там найдет:\n"
"\n"
" * если найден загрузочный сектор Windows, он заменит его на загрузочный\n"
"сектор GRUB/LILO. Следовательно, вы сможете загружать и GNU/Linux и другую\n"
"OS, установленную на вашей машине.\n"
"\n"
" * если найден загрузочный сектор GRUB или LILO, он заменит его на новый.\n"
"\n"
"Если возникают сомнения, DrakX спросит вас куда разместить загрузчик. В\n"
"общем случае, \"%s\" это лучший вариант выбора. Если выбрать \"%s\", тогда\n"
"начальный загрузчик не будет установлен вообще. Используйте этот вариант\n"
"только если вы знаете, что вы делаете."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"Теперь пришло время выбрать систему печати для вашего компьютера. Другие OS\n"
"могут предложить вам одну, а Mandriva Linux предлагает две. Каждая из "
"систем\n"
"является лучшей для определенной конфигурации.\n"
"\n"
" * \"%s\" -- что означает ``печатать, не ставить в очередь'' (``print,\n"
"do not queue''), это удобный вариант, если вы напрямую подключены к своему\n"
"принтеру, вы хотите избежать проблем с зажевыванием бумаги, и у вас нет\n"
"сетевых принтеров. (\"%s\" сможет справиться только с очень простыми\n"
"реализациями сетей и является для них довольно медленным.) Рекомендуется\n"
"использовать \"pdq \" в случае, если вы только начинаете свой путь в\n"
"GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'' (Общая система печати Unix),\n"
"это превосходная печать на вашем локальном принтере, а также на половине\n"
"всей планеты. Она проста в настройке и может выступать в качестве сервера\n"
"или клиента для древних систем печати \"lpd \", поэтому она совместима с\n"
"ранее выпущенными системами, которым возможно еще требуются службы печати.\n"
"Несмотря на всю свою мощь, базовые настройки у нее проще чем у \"pdq\".\n"
"Если вам нужно эмулировать \"lpd\", вы должны включить демон \"cups-lpd \".\n"
"\"%s\" имеет графический интерфейс для печати или выбора параметров\n"
"принтера и для управления принтером.\n"
"\n"
"Если вы сделаете свой выбор сейчас, а позже обнаружите, что система печати\n"
"вам не подходит, вы сможете изменить ее, запустив PrinterDrake из Центра\n"
"Управления Mandriva Linux и нажав на кнопку  \"%s\"."

#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"

#: help.pm:765 printer/cups.pm:117 printer/data.pm:129
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Эксперт"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"Сначала DrakX определит любые IDE устройства, присутствующие в вашей\n"
"системе. Также он проверит наличие одной или больше PCI SCSI карт в\n"
"системе. Если будет найдена SCSI карта, DrakX автоматически установит\n"
"соответствующий драйвер.\n"
"\n"
"Так как обнаружение аппаратного обеспечения не всегда ошибкоустойчиво,\n"
"DrakX может не справиться с определением ваших жестких дисков. Если это\n"
"случится, тогда вам прийдется вручную указать ему оборудование.\n"
"\n"
"Если вам пришлось вручную указать PCI SCSI адаптер, DrakX спросит вас,\n"
"хотите ли вы настроить его параметры. Вы должны разрешить DrakX проверить\n"
"специфические для карты опции, которые нужны для инициализации адаптера.\n"
"Обычно DrakX проходит этот шаг без проблем.\n"
"\n"
"Если DrakX не в состоянии автоматически определить, какие параметры нужны\n"
"оборудованию, вам прийдется вручную настроить драйвер."

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
"\"%s\": если в вашей системе найдена звуковая карта, здесь это будет\n"
"показано. Если вы увидите, что показанная звуковая карта не соответствует\n"
"тому, что у вас реально есть в системе, вы можете нажать на кнопку и\n"
"выбрать другой драйвер."

#: help.pm:788 help.pm:855 install_steps_interactive.pm:1020
#: install_steps_interactive.pm:1037
#, c-format
msgid "Sound card"
msgstr "Звуковая карта"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"В качестве обзора DrakX представит сводку имеющейся у него различной\n"
"информации о вашей системе. В зависимости от установленного у вас\n"
"оборудования, вы можете увидеть все или некоторые из следующих пунктов.\n"
"Каждый пункт состоит из конфигурационных элементов для настройки,\n"
"сопровождаемых небольшой сводкой о текущей конфигурации. Нажмите на\n"
"соответствующую кнопку \"%s\", чтобы изменить настройки.\n"
"\n"
" * \"%s\": проверьте текущую настройку раскладки клавиатуры и сделайте\n"
"поправку если необходимо.\n"
"\n"
" * \"%s\": проверьте текущий выбор страны Если вы находитесь не в этой\n"
"стране, нажмите на кнопку \"%s\" и выберите другую. Если ваша страна не\n"
"присутствует в первом показанном списке, нажмите кнопку \"%s\", чтобы\n"
"увидеть полный список.\n"
"\n"
" * \"%s\": По умолчанию, DrakX выбирает часовой пояс, основываясь на\n"
"выбранной вами стране. Вы можете здесь нажать на кнопку \"%s\", если\n"
"выбранное неверно.\n"
"\n"
" * \"%s\": проверьте текущую конфигурацию мыши и нажмите на кнопку, если\n"
"необходимо что-либо изменить.\n"
"\n"
" * \"%s\": по нажатию на кнопку \"%s\" откроется мастер настройки принтера.\n"
"Прочитайте соответствующую главу в книге ``Стартовое руководство\n"
"пользователя'', чтобы узнать как установить новый принтер. Представленный\n"
"там интерфейс подобен используемому в процессе установки.\n"
"\n"
" * \"%s\": если в вашей системе найдена звуковая карта, здесь это будет\n"
"показано. Если вы увидите, что показанная звуковая карта не соответствует\n"
"тому, что у вас реально есть в системе, вы можете нажать на кнопку и\n"
"выбрать другой драйвер.\n"
"\n"
" * \"%s\": если в вашей системе была обнаружена TV карта, она будет здесь\n"
"показана. Если у вас есть TV карта, но она не была определена, нажмите на\n"
"кнопку \"%s\" и попробуйте настроить ее вручную.\n"
"\n"
" * \"%s\": вы можете кликнуть по \"%s\" чтобы изменить связанные с картой\n"
" параметры если считаете что настройка неверна\n"
"\n"
" * \"%s\": по умолчанию DrakX настраивает ваш графический интерфейс на\n"
"разрешение \"800x600\" или \"1024x768\". Если вас это не устраивает,\n"
"нажмите \"%s\" для внесения изменений в конфигурацию вашего графического\n"
"интерфейса.\n"
"\n"
" * \"%s\": если вы хотите настроить доступ в Интернет или локальную сеть\n"
"прямо сейчас. Обратитесь к печатной документации или используйте\n"
"Центр управления Mandriva Linux после установки чтобы почитать\n"
"встроенную справку.\n"
"\n"
" * \"%s\": позволяет настроить адреса HTTP и FTP прокси если машина,\n"
"которую вы настраиваете, будет работать за прокси-сервером.\n"
"\n"
" * \"%s\": этот пункт предлагает вам переопределить уровень безопасности\n"
"как это делалось на предыдущем шаге ().\n"
"\n"
" * \"%s\": если вы собираетесь подключать вашу машину к Интернет, неплохой\n"
"идеей будет защитить себя от вторжений извне, установив файервол.\n"
"Прочитайте соответствующий раздел книги ``Стартовое руководство\n"
"пользователя'', где описаны детали настройки файервола.\n"
"\n"
" * \"%s\": если вы желаете изменить конфигурацию начального загрузчика,\n"
"нажмите эту кнопку. Эта опция предназначена для опытных пользователей.\n"
"Обратитесь к печатной документации или встроенной справке о настройке\n"
"загрузчика в Центре управления Mandriva Linux.\n"
" * \"%s\": здесь вы сможете проконтролировать какие службы будут запущены\n"
"на вашей машине. Если ваша машина будет сервером, вам стоит проверить эти\n"
"установки."

#: help.pm:855 install_steps_interactive.pm:884
#: install_steps_interactive.pm:979 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "Часовой пояс"

#: help.pm:855 install_steps_interactive.pm:1053
#, c-format
msgid "TV card"
msgstr "TV карта"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "карта ISDN"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "Графический Интерфейс"

#: help.pm:855 install_any.pm:1735 install_steps_interactive.pm:1071
#: standalone/drakbackup:2040
#, c-format
msgid "Network"
msgstr "Сеть"

#: help.pm:855 install_steps_interactive.pm:1083
#, c-format
msgid "Proxies"
msgstr "Прокси"

#: help.pm:855 install_steps_interactive.pm:1094
#, c-format
msgid "Security Level"
msgstr "Уровень безопасности"

#: help.pm:855 install_steps_interactive.pm:1108 network/drakfirewall.pm:189
#, c-format
msgid "Firewall"
msgstr "Файервол"

#: help.pm:855 install_steps_interactive.pm:1124
#, c-format
msgid "Bootloader"
msgstr "Начальный загрузчик"

#: help.pm:855 install_steps_interactive.pm:1137 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "Службы"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Выберите жесткий диск, который нужно очистить для инсталляции вашего нового\n"
"раздела Mandriva Linux. Будьте осторожны, все данные на нем будут потеряны\n"
"и их нельзя будет восстановить!"

# DO NOT BOTHER TO MODIFY HERE, SEE:
# cvs.mandriva.com:/cooker/doc/manualB/modules/ru/drakx-chapter.xml
#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Нажмите \"%s\", если вы хотите удалить все данные и разделы на данном\n"
"жестком диске. Будьте осторожны, потому что после нажатия \"%s\" вы не\n"
"сможете восстановить данные и разделы на этом диске, включая данные\n"
"Windows.\n"
"\n"
"Нажмите \"%s\" для отмены этой операции без потери данных и разделов на\n"
"данном жестком диске."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Далее ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- Назад"

#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
"Невозможно получить доступ к модулям ядра, соответствующим вашему ядру\n"
"(отсутствует файл %s), обычно это означает, что ваша загрузочная дискета\n"
"не синхронизирована с установочным накопителем (пожалуйста, создайте более\n"
"новую загрузочную дискету)"

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Вы также должны отформатировать %s"

#: install_any.pm:407
#, c-format
msgid "Do you have further supplementary media?"
msgstr "Есть ли у вас следующий дополнительный носитель?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:410
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"Следующий носитель был найден и будет использован во время установки: %s.\n"
"\n"
"\n"
"Есть ли у вас установочный supplementary CD для настройки?"

#: install_any.pm:423 printer/printerdrake.pm:3188
#: printer/printerdrake.pm:3195 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:423
#, c-format
msgid "Network (HTTP)"
msgstr "Сеть (HTTP)"

#: install_any.pm:423
#, c-format
msgid "Network (FTP)"
msgstr "Сеть  (FTP)"

#: install_any.pm:423
#, c-format
msgid "Network (NFS)"
msgstr "Сеть (NFS)"

#: install_any.pm:453
#, c-format
msgid "Insert the CD 1 again"
msgstr "Вставьте CD 1 снова"

#: install_any.pm:479 network/netconnect.pm:857 standalone/drakbackup:114
#, c-format
msgid "No device found"
msgstr "Устройства не найдены"

#: install_any.pm:484
#, c-format
msgid "Insert the CD"
msgstr "Вставьте CD"

#: install_any.pm:489
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "Невозможно отмонтировать CD-ROM"

#: install_any.pm:522 install_any.pm:543
#, c-format
msgid "URL of the mirror?"
msgstr "URL зеркала?"

#: install_any.pm:527
#, c-format
msgid "NFS setup"
msgstr "Настройка NFS"

#: install_any.pm:527
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr "Пожалуйста, укажите имя хоста и каталог вашего носителя NFS"

#: install_any.pm:528
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr "Имя хоста для монтирования NFS?"

#: install_any.pm:528 standalone/draknfs:288
#, c-format
msgid "Directory"
msgstr "Каталог"

#: install_any.pm:581
#, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr ""
"Невозможно отыскать список пакетов для этого зеркала. Проверьте правильность "
"размещения."

#: install_any.pm:658
#, c-format
msgid "Removing packages prior to upgrade..."
msgstr "Удаляются пакеты перед обновлением..."

#: install_any.pm:700
#, c-format
msgid "Looking at packages already installed..."
msgstr "Выполняется поиск уже установленных пакетов..."

#: install_any.pm:704
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Выполняется поиск пакетов для обновления..."

#: install_any.pm:782
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"Смените компакт-диск!\n"
"Пожалуйста, вставьте компакт-диск под названием \"%s\" в свой привод и "
"нажмите ОК"

#: install_any.pm:794
#, c-format
msgid "Copying in progress"
msgstr "Производится копирование"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:937
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"Вы выбрали следующие серверы: %s\n"
"\n"
"\n"
"Эти серверы по умолчанию включены. У них отсутствуют какие-либо известные\n"
"проблемы с безопасностью, но некоторые еще могли быть не найдены. В этом\n"
"случае вы обязательно должны обновить их и как можно скорее.\n"
"\n"
"\n"
"Вы действительно хотите установить эти серверы?\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:960
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Следующие пакеты будут удалены, чтобы обеспечить возможность обновления\n"
"вашей системы: %s\n"
"\n"
"\n"
"Вы действительно хотите удалить эти пакеты?\n"

#: install_any.pm:1396 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "Ошибка при чтении файла %s"

#: install_any.pm:1630
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "Следующие диски были переименованы:"

#: install_any.pm:1632
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (ранее назывался %s)"

#: install_any.pm:1672
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Произошла ошибка - не были найдены верные устройства для создания новых "
"файловых систем. Пожалуйста, проверьте свое аппаратное обеспечение для "
"выяснения вероятной причины."

#: install_any.pm:1716
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1716
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1716
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1739
#, c-format
msgid "Please choose a media"
msgstr "Пожалуйста, выберите источник"

#: install_any.pm:1755
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "Файл уже существует. Переписать его?"

#: install_any.pm:1759
#, c-format
msgid "Permission denied"
msgstr "Доступ запрещен"

#: install_any.pm:1808
#, c-format
msgid "Bad NFS name"
msgstr "Неудачное имя NFS"

#: install_any.pm:1829
#, c-format
msgid "Bad media %s"
msgstr "Неудачный источник %s"

#: install_any.pm:1879
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "Невозможно создать скриншоты перед разбивкой на разделы"

#: install_any.pm:1886
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Скриншоты будут доступны после установки в %s"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "Установка системы"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "Настройка системы"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"Некоторым устройствам на вашем компьютере для нормальной работы требуются\n"
"``родные'' драйверы.\n"
"Вы можете найти различную информацию о них на: %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"У вас должен быть корневой раздел.\n"
"Для этого создайте раздел (или выберите уже существующий).\n"
"Затем выберите действие ``Точка монтирования'' и установите ее в `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"У вас нет раздела swap\n"
"\n"
"Желаете продолжить?"

#: install_interactive.pm:70 install_steps.pm:218
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "У вас должен быть раздел FAT, примонтированный на /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Недостаточно свободного места для размещения новых разделов"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Использовать существующие разделы"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "Нет существующих для использования разделов"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "Использовать раздел Windows для loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Какой раздел вы хотите использовать для Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Выберите размеры"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Размер корневого раздела в MB: "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Размер раздела swap в MB: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""
"Отсутствует раздел FAT для использования в качестве loopback (или не хватает "
"места)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Размер какого из разделов вы хотите изменить?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"Программа изменения размера FAT не может обработать ваш раздел, \n"
"произошла следующая ошибка: %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Вычисляется размер раздела Windows"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr ""
"Ваш раздел Windows слишком фрагментирован. Пожалуйста, перезагрузите свой "
"компьютер под Windows, запустите утилиту ``defrag'', а затем повторно "
"запустите установку Mandriva Linux."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ПРЕДУПРЕЖДЕНИЕ!\n"
"\n"
"Сейчас DrakX изменит размер вашего раздела Windows. Будьте\n"
"осторожны: эта операция опасна. Если вы еще этого не сделали,\n"
"вам стоит выйти из инсталляции, запустить \"chkdsk c:\" в\n"
"командной строке под Windows (имейте в виду, что запуска \n"
"графической программы \"scandisk\" недостаточно, обязательно\n"
"запустите \"chkdsk\" в командной строке), по желанию выполнить\n"
"дефрагментацию (defrag), затем начать установку снова. \n"
"Вы также должны сделать резервную копию данных.\n"
"Если уверены, нажмите Ok."

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Какой объем вы хотите оставить для Windows"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "раздел %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "Изменяется размер раздела Windows"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Изменение размера FAT завершилось неудачно: %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "Отсутствует раздел FAT для изменения размера (или не хватает места)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "Удалить Windows(TM)"

#: install_interactive.pm:213
#, fuzzy, c-format
msgid "Erase and use entire disk"
msgstr "Очистить весь диск"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr ""
"У вас есть более одного жесткого диска. На какой из них вы хотите установить "
"Linux?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ВСЕ существующие разделы и данные на них будут потеряны на диске %s"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "Используйте fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"Теперь вы можете разметить %s.\n"
"После завершения не забудьте сохранить при помощи `w'"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "Вообще не могу найти места для установки"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "Мастер Разметки диска DrakX нашел следующие решения:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "Разметка на разделы завершилась неудачно: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "Поднимается сеть"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "Опускается сеть"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandriva Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A.  \n"
msgstr ""
"Введение\n"
"\n"
"Операционная система и различные компоненты, доступные в дистрибутиве\n"
"Mandriva Linux далее будут называться \"Программными Продуктами\".\n"
"Программные Продукты включают, но не ограничиваются, набор программ, \n"
"методы, правила и документацию, связанную с операционной системой\n"
"и различными компонентами дистрибутива Mandriva Linux.\n"
"\n"
"\n"
"1. Лицензионное соглашение\n"
"\n"
"Пожалуйста, внимательно прочтите этот документ. Данный документ является\n"
"лицензионным соглашением, заключаемым между вами и Mandriva S.A.,\n"
"применимо к Программным Продуктам. Устанавливая, тиражируя или\n"
"используя Программные Продукты в любых других целях, вы тем самым всецело\n"
"принимаете и полностью соглашаетесь с условиями и положениями данной\n"
"Лицензии. Если вы не согласны с какой-либо частью данной Лицензии, вам\n"
"не разрешается устанавливать, тиражировать или использовать Программные\n"
"Продукты.\n"
"Любые попытки использовать, тиражировать или использовать Программные\n"
"Продукты в целях, противоречащих условиям данной Лицензии, аннулируют и\n"
"освобождают вас от всех прав, предоставляемых данной Лицензией.\n"
"При окончании срока действия Лицензии вы должны немедленно удалить все "
"копии\n"
"Программных Продуктов.\n"
"\n"
"\n"
"2. Ограниченные гарантийные обязательства\n"
"\n"
"Программные Продукты и прилагаемая документация предоставляются \"как есть\","
"безо всякой гарантии в пределах, дозволенных законом.\n"
"Mandriva S.A. ни при каких условиях и в пределах, дозволенных\n"
"законом, не несет ответственности за любой какой бы то ни было "
"определенный,\n"
"случайный, прямой или косвенный ущерб (включая неограниченный ущерб от\n"
"крушения бизнеса, перерывов в коммерческой деятельности, финансовых "
"убытков,\n"
"судебных издержек и штрафов, являющихся результатом судебных "
"разбирательств,\n"
"или любых других косвенных потерь), являющийся результатом использования\n"
"Программных Продуктов, даже, если Mandriva S.A. было известно\n"
"о возможности или случаях такого ущерба.\n"
"\n"
"ОГРАНИЧЕННАЯ ОТВЕТСТВЕННОСТЬ, СВЯЗАННАЯ С ВЛАДЕНИЕМ ИЛИ ИСПОЛЬЗОВАНИЕМ "
"ЗАПРЕЩЕННОГО ПРОГРАММНОГО ОБЕСПЕЧЕНИЯ В НЕКОТОРЫХ СТРАНАХ\n"
"\n"
"В пределах, дозволенных законом, Mandriva S.A. или ее распространители\n"
"ни при каких условиях не несут ответственности за любой, какой бы то ни "
"было\n"
"определенный, случайный, прямой или косвенный ущерб (включая неограниченный\n"
"ущерб от крушения бизнеса, перерывов в коммерческой деятельности, "
"финансовых\n"
"убытков, судебных издержек и штрафов, являющихся результатом судебных\n"
"разбирательств, или любых других косвенных потерь), являющихся результатом\n"
"владения и использования компонентов программного обеспечения,\n"
"или являющихся результатом скачивания компонентов программного обеспечения\n"
"с одного из сайтов Mandriva Linux, запрещенных или ограниченных в некоторых\n"
"странах местными законами.\n"
"Ограниченная ответственность применяется, но не ограничивается,\n"
"к компонентам сильной криптографии, включаемых в Программные Продукты.\n"
"\n"
"\n"
"3. Лицензия GPL и связанные лицензии\n"
"\n"
"Программные Продукты состоят из компонентов, созданных различными людьми\n"
"или организациями. Большинство этих компонентов находятся под действием\n"
"условий и положений GNU General Public Licence, далее называемой \"GPL\",\n"
"или похожих лицензий. Большинство этих лицензий позволяют вам использовать,\n"
"тиражировать, адаптировать или распространять далее компоненты, на которые\n"
"они распространяются. Пожалуйста, внимательно читайте условия и положения\n"
"лицензионного соглашения для каждого из компонент перед использованием\n"
"любого компонента. Любые вопросы по лицензии компонента должны быть\n"
"адресованы автору компонента, а не Mandriva.\n"
"Программы, разработанные Mandriva S.A., находятся под действием лицензии\n"
"GPL. Документация, написанная Mandriva S.A., находится под действием\n"
"особой лицензии. Пожалуйста, обратитесь к документации за дополнительной\n"
"информацией.\n"
"\n"
"4. Права на интеллектуальную собственность\n"
"\n"
"Все права на компоненты Программных Продуктов принадлежат их "
"соответствующим\n"
"авторам и защищены законами об интеллектуальной собственности и авторском\n"
"праве, применительно к программному обеспечению.\n"
"Mandriva S.A. сохраняет за собой право изменять или адаптировать\n"
"Программные Продукты, как целиком, так и по частям, любым способом и для\n"
"любых целей.\n"
"\"Mandriva\", \"Mandriva Linux\" и соответствующие логотипы являются "
"торговыми марками Mandriva S.A.\n"
"\n"
"\n"
"5. Основные законы\n"
"\n"
"Если какая-либо часть этого соглашения является недействительной,\n"
"противозаконной или противоречащей действующему законодательству, эта\n"
"часть исключается из этого контракта. Вы остаетесь ограниченными\n"
"другими пригодными разделами соглашения.\n"
"Условия и положения данной Лицензии находятся под действием французского\n"
"законодательства.\n"
"Все разногласия по поводу условий и положений этой лицензии, скорее всего, "
"будут оспариваться в суде. В последнюю очередь оспаривание вопроса будет "
"передано в соответствующий Законодательный Суд Парижа - Франция. По любым "
"вопросам, касающимся этого документа, пожалуйста, свяжитесь\n"
"с Mandriva S.A.\n"

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
"Предупреждение: Свободное программное обеспечение не обязательно может\n"
"быть свободным от патентов, и некоторое входящее в состав Свободное \n"
"программное обеспечение может иметь патенты в вашей стране.\n"
"Например, входящие в состав MP3 декодеры могут требовать лицензии для\n"
"последующего использования (см. подробнее http://www.mp3licensing.com).\n"
"Если вы не уверены в применимости патента для вас, сверьтесь со своими \n"
"местными законами."

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Предупреждение\n"
"Пожалуйста, внимательно прочтите условия, приведенные ниже. Если вы\n"
"не согласны с какой-либо частью, вам не разрешается устанавливать \n"
"следующий накопитель CD. Нажмите 'Отказаться' для продолжения установки\n"
"без этого накопителя.\n"
"\n"
"\n"
"Некоторые компоненты, имеющиеся на следующем CD, не ограничиваются\n"
"Лицензией GPL или подобными соглашениями. Каждый такой компонент\n"
"ограничен условиями его собственного лицензионного соглашения. \n"
"Пожалуйста, внимательно прочтите и соблюдайте правила таких особых\n"
"лицензионных соглашений перед использованием или дальнейшем\n"
"распространением оговоренных компонентов. \n"
"Такие лицензионные соглашения в основном будут предупреждать передачу,\n"
"копирование (за исключением создания резервных копий), дальнейшее\n"
"распространение, обратную разработку, дизассемблирование, декомпиляцию\n"
"или изменение компонента.\n"
"Любое нарушение соглашения немедленно аннулирует ваши права по\n"
"указанному лицензионному соглашению. Пока определенное лицензионное\n"
"соглашение не обеспечит вас такими правами, вы, обычно, не можете\n"
"устанавливать программы более, чем на одну систему, или применять их\n"
"для сетевого использования. Если сомневаетесь, пожалуйста, свяжитесь\n"
"непосредственно с распространителем или редактором компонента. \n"
"Передача третьим лицам или копирование таких компонентов, включая\n"
"документацию, зачастую запрещено.\n"
"\n"
"Все права на компоненты следующего накопителя CD принадлежат их\n"
"непосредственным авторам и защищены законами об интеллектуальной\n"
"собственности и авторских правах применительно к программному\n"
"обеспечению.\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"Поздравляем, установка завершена.\n"
"Извлеките загрузочный диск и нажмите Enter для перезагрузки.\n"
"\n"
"\n"
"За информацией о фиксах, доступных для этой версии Mandriva Linux,\n"
"обращайтесь к Списку ошибок (Errata) , доступном на:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Информация о настройке вашей системы доступна в главе post install\n"
"Официального Руководства Пользователя Mandriva Linux."

#: install_steps.pm:253
#, c-format
msgid "Duplicate mount point %s"
msgstr "Дублирование точки монтирования %s"

#: install_steps.pm:481
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm"
"\"\n"
msgstr ""
"Некоторые важные пакеты установились некорректно.\n"
"Либо привод cdrom, либо компакт-диск поврежден.\n"
"Проверьте диск, вставленный в компьютер, при помощи команды \"rpm -qpl media/"
"main/*.rpm\"\n"

#: install_steps_auto_install.pm:75 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Осуществляется переход на этап `%s'\n"

#: install_steps_gtk.pm:181
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandriva Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"На вашей системе мало ресурсов. У вас могут возникнуть проблемы при\n"
"установке Mandriva Linux. Если это случится, вы можете попробовать\n"
"установку в текстовом режиме. Для этого нажмите `F1' при загрузке с\n"
"CDROM'а, и затем наберите `text'."

#: install_steps_gtk.pm:211 install_steps_interactive.pm:628
#, c-format
msgid "Package Group Selection"
msgstr "Выбор группы пакетов"

#: install_steps_gtk.pm:254 install_steps_interactive.pm:571
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Общий объем: %d / %d MB"

#: install_steps_gtk.pm:299
#, c-format
msgid "Bad package"
msgstr "Плохой пакет"

#: install_steps_gtk.pm:301
#, c-format
msgid "Version: "
msgstr "Версия:"

#: install_steps_gtk.pm:302
#, c-format
msgid "Size: "
msgstr "Размер:"

#: install_steps_gtk.pm:302
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:303
#, c-format
msgid "Importance: "
msgstr "Важность: "

#: install_steps_gtk.pm:336
#, c-format
msgid "You can not select/unselect this package"
msgstr "Вы не можете выбрать/отменить_выбор этого пакета"

#: install_steps_gtk.pm:340 network/thirdparty.pm:329
#, c-format
msgid "due to missing %s"
msgstr "из-за отсутствия %s"

#: install_steps_gtk.pm:341
#, c-format
msgid "due to unsatisfied %s"
msgstr "из-за неудовлетворенных %s"

#: install_steps_gtk.pm:342
#, c-format
msgid "trying to promote %s"
msgstr "выполняется попытка активизировать %s"

#: install_steps_gtk.pm:343
#, c-format
msgid "in order to keep %s"
msgstr "чтобы сохранить %s"

#: install_steps_gtk.pm:348
#, c-format
msgid ""
"You can not select this package as there is not enough space left to install "
"it"
msgstr ""
"Вы не можете выбрать этот пакет, т.к. для его установки не хватает места"

#: install_steps_gtk.pm:351
#, c-format
msgid "The following packages are going to be installed"
msgstr "Следующие пакеты будут установлены "

#: install_steps_gtk.pm:352
#, c-format
msgid "The following packages are going to be removed"
msgstr "Следующие пакеты будут удалены "

#: install_steps_gtk.pm:376
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "Это обязательный пакет, его выбор не может быть отменен"

#: install_steps_gtk.pm:378
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "Вы не можете отменить выбор этого пакета. Он уже установлен"

#: install_steps_gtk.pm:381
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"Этот пакет должен быть обновлен.\n"
"Вы уверены, что хотите отменить его выбор?"

#: install_steps_gtk.pm:384
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "Вы не можете отменить выбор этого пакета. Он должен быть обновлен"

#: install_steps_gtk.pm:389
#, c-format
msgid "Show automatically selected packages"
msgstr "Показывать автоматически выбранные пакеты"

#: install_steps_gtk.pm:394
#, c-format
msgid "Load/Save selection"
msgstr "Загрузить/Сохранить выбор"

#: install_steps_gtk.pm:395
#, c-format
msgid "Updating package selection"
msgstr "Обновляется выбор пакетов"

#: install_steps_gtk.pm:400
#, c-format
msgid "Minimal install"
msgstr "Минимальная установка"

#: install_steps_gtk.pm:414 install_steps_interactive.pm:490
#, c-format
msgid "Choose the packages you want to install"
msgstr "Выберите пакеты, которые вы хотите установить"

#: install_steps_gtk.pm:431 install_steps_interactive.pm:714
#, c-format
msgid "Installing"
msgstr "Устанавливается"

#: install_steps_gtk.pm:457
#, c-format
msgid "No details"
msgstr "Убрать подробности"

#: install_steps_gtk.pm:472
#, c-format
msgid "Time remaining "
msgstr "Оставшееся время "

#: install_steps_gtk.pm:473
#, c-format
msgid "Estimating"
msgstr "Приблизительная оценка"

#: install_steps_gtk.pm:500
#, c-format
msgid "%d packages"
msgstr "%d пакетов"

#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738
#, c-format
msgid "Refuse"
msgstr "Отказаться"

#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"Смените компакт-диск!\n"
"\n"
"Пожалуйста, вставьте компакт-диск под названием \"%s\" в свой привод, а "
"затем и нажмите ОК.\n"
"Если у вас его нет, нажмите Отмена, чтобы отказаться от установки с этого "
"компакт-диска."

#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
#, c-format
msgid "There was an error ordering packages:"
msgstr "Произошла ошибка при получении пакетов:"

#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
#, c-format
msgid "There was an error installing packages:"
msgstr "Произошла ошибка при установке пакетов:"

#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
#: install_steps_interactive.pm:757
#, c-format
msgid "Go on anyway?"
msgstr "Все равно продолжить?"

#: install_steps_gtk.pm:582 install_steps_interactive.pm:939 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Сводка"

#: install_steps_gtk.pm:605 install_steps_interactive.pm:935
#: install_steps_interactive.pm:1084
#, c-format
msgid "not configured"
msgstr "не настроен"

#: install_steps_gtk.pm:668
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"Найдены следующие установочные источники.\n"
"Если вы хотите пропустить некоторые из них, вы можете снять с них отметку "
"сейчас."

#: install_steps_gtk.pm:677
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive "
"before installation.\n"
"It will then continue from the hard drive and the packages will remain "
"available once the system is fully installed."
msgstr ""
"У вас есть опция для копирования содержимого компакт-диска на жесткий диск "
"перед установкой.\n"
"Таким образом установка продолжится с жесткого диска и пакеты останутся "
"доступными после полной установки системы."

#: install_steps_gtk.pm:679
#, c-format
msgid "Copy whole CDs"
msgstr "Копировать cd-диски полностью"

#: install_steps_interactive.pm:84
#, c-format
msgid "License agreement"
msgstr "Лицензионное соглашение"

#: install_steps_interactive.pm:89
#, c-format
msgid "Release Notes"
msgstr "Заметки о релизе"

#: install_steps_interactive.pm:120
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Пожалуйста, выберите раскладку вашей клавиатуры."

#: install_steps_interactive.pm:122
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "Здесь представлен полный список имеющихся раскладок клавиатур"

#: install_steps_interactive.pm:152
#, c-format
msgid "Install/Upgrade"
msgstr "Установка/Обновление"

#: install_steps_interactive.pm:153
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Это установка или обновление?"

#: install_steps_interactive.pm:159
#, c-format
msgid "Upgrade %s"
msgstr "Обновление %s"

#: install_steps_interactive.pm:172
#, c-format
msgid "Encryption key for %s"
msgstr "Ключ шифрования для %s"

#: install_steps_interactive.pm:195
#, c-format
msgid "Please choose your type of mouse."
msgstr "Пожалуйста, выберите тип вашей мыши"

#: install_steps_interactive.pm:196
#, c-format
msgid "Mouse choice"
msgstr "Выбор мыши"

#: install_steps_interactive.pm:205 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Порт мыши"

#: install_steps_interactive.pm:206 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Укажите, к какому последовательному порту подключена ваша мышь."

#: install_steps_interactive.pm:216
#, c-format
msgid "Buttons emulation"
msgstr "Эмуляция кнопок"

#: install_steps_interactive.pm:218
#, c-format
msgid "Button 2 Emulation"
msgstr "Эмуляция 2-й кнопки"

#: install_steps_interactive.pm:219
#, c-format
msgid "Button 3 Emulation"
msgstr "Эмуляция 3-й кнопки"

#: install_steps_interactive.pm:240
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:240
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Настраиваются карты PCMCIA ..."

#: install_steps_interactive.pm:247
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:247
#, c-format
msgid "Configuring IDE"
msgstr "Настраивается IDE"

#: install_steps_interactive.pm:267
#, c-format
msgid "No partition available"
msgstr "Нет доступных разделов"

#: install_steps_interactive.pm:270
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Сканируются разделы на наличие точек монтирования"

#: install_steps_interactive.pm:277
#, c-format
msgid "Choose the mount points"
msgstr "Выберите точки монтирования"

#: install_steps_interactive.pm:323
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"Недостаточно свободного места для 1МБ программы самозагрузки! Установка "
"продолжится, но чтобы загрузить вашу систему, вам придется создать раздел "
"начальной загрузки в DiskDrake"

#: install_steps_interactive.pm:328
#, c-format
msgid ""
"You'll need to create a PPC PReP Boot bootstrap! Install will continue, but "
"to boot your system, you'll need to create the bootstrap partition in "
"DiskDrake"
msgstr ""
"Вам нужно будет создать PPC PReP Boot bootstrap! Установка продолжится, "
"однако чтобы загрузить систему, вам прийдется создать раздел bootstrap в "
"DiskDrake"

#: install_steps_interactive.pm:364
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Выберите разделы, которые вы хотите отформатировать"

#: install_steps_interactive.pm:366
#, c-format
msgid "Check bad blocks?"
msgstr "Проверить плохие блоки?"

#: install_steps_interactive.pm:394
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""
"Проверка файловой системы %s завершилась неудачей. Хотите исправить ошибки "
"(осторожно, вы можете потерять данные)?"

#: install_steps_interactive.pm:397
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr ""
"Не хватает swap-пространства для завершения установки, пожалуйста, увеличьте "
"его немного"

#: install_steps_interactive.pm:406
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr ""
"Выполняется поиск доступных пакетов и перестраивается база данных rpm..."

#: install_steps_interactive.pm:407 install_steps_interactive.pm:459
#, c-format
msgid "Looking for available packages..."
msgstr "Выполняется поиск доступных пакетов..."

#: install_steps_interactive.pm:428 install_steps_interactive.pm:839
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Выберите зеркало, с которого будут получены пакеты"

#: install_steps_interactive.pm:468
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"В вашей системе осталось недостаточно места для установки или обновления (%d "
"> %d)"

#: install_steps_interactive.pm:502
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"Пожалуйста, выберите загрузить или сохранить выбор пакетов.\n"
"Формат такой же, как и у созданных файлов auto_install."

#: install_steps_interactive.pm:504
#, c-format
msgid "Load"
msgstr "Загрузить"

#: install_steps_interactive.pm:504 standalone/drakbackup:4055
#: standalone/drakbackup:4125 standalone/logdrake:175
#, c-format
msgid "Save"
msgstr "Сохранить"

#: install_steps_interactive.pm:512
#, c-format
msgid "Bad file"
msgstr "Неправильный файл"

#: install_steps_interactive.pm:585
#, c-format
msgid "Selected size is larger than available space"
msgstr "Выбранный размер превышает доступное место"

#: install_steps_interactive.pm:600
#, c-format
msgid "Type of install"
msgstr "Тип установки"

#: install_steps_interactive.pm:601
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Вы не выбрали ни одной группы пакетов.\n"
"Пожалуйста, выберите желаемую минимальную установку:"

#: install_steps_interactive.pm:605
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "С основной документацией (рекомендуется!)"

#: install_steps_interactive.pm:606
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Действительно минимальная установка (в особенности нет urpmi)"

#: install_steps_interactive.pm:645 standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "Все"

#: install_steps_interactive.pm:684
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Если у вас есть все CD из списка, приведенного ниже, нажмите ОК.\n"
"Если у вас нет ни одного из этих CD, нажмите Отмена.\n"
"Если отсутствуют только некоторые CD, отмените их выбор и нажмите ОК."

#: install_steps_interactive.pm:689
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Компакт-диск с меткой \"%s\""

#: install_steps_interactive.pm:714
#, c-format
msgid "Preparing installation"
msgstr "Подготавливается установка"

#: install_steps_interactive.pm:722
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Устанавливается пакет %s\n"
"%d%%"

#: install_steps_interactive.pm:771
#, c-format
msgid "Post-install configuration"
msgstr "Настройка после установки"

#: install_steps_interactive.pm:778
#, c-format
msgid "Please ensure the Update Modules media is in drive %s"
msgstr ""
"Пожалуйста, убедитесь что источник Update Modules находится в устройстве %s"

#: install_steps_interactive.pm:812
#, c-format
msgid "Updates"
msgstr "Обновления"

#: install_steps_interactive.pm:813
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"Теперь у вас есть возможность скачать обновленные пакеты. Эти пакеты\n"
"были обновлены после того, как был выпущен дистрибутив. Они могут\n"
"содержать фиксы для безопасности или ошибок.\n"
"\n"
"Чтобы скачать эти пакеты, вам понадобится действующее подключение \n"
"Интернету.\n"
"\n"
"Хотите установить эти обновления?"

#: install_steps_interactive.pm:834
#, c-format
msgid ""
"Contacting Mandriva Linux web site to get the list of available mirrors..."
msgstr ""
"Выполняется подключение к веб-сайту Mandriva Linux для получения списка "
"доступных пакетов..."

#: install_steps_interactive.pm:853
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr ""
"Выполняется подключение к зеркалу для получения списка доступных пакетов..."

#: install_steps_interactive.pm:857
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Невозможно соединиться с зеркалом %s"

#: install_steps_interactive.pm:857
#, c-format
msgid "Would you like to try again?"
msgstr "Вы хотели бы попробовать снова?"

#: install_steps_interactive.pm:884 standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "Какой у вас часовой пояс?"

#: install_steps_interactive.pm:889
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Автоматическая синхронизация времени (используя NTP)"

#: install_steps_interactive.pm:897
#, c-format
msgid "NTP Server"
msgstr "Сервер NTP"

#: install_steps_interactive.pm:952 install_steps_interactive.pm:960
#: install_steps_interactive.pm:978 install_steps_interactive.pm:985
#: install_steps_interactive.pm:1136 services.pm:133
#: standalone/drakbackup:1585
#, c-format
msgid "System"
msgstr "Система"

#: install_steps_interactive.pm:992 install_steps_interactive.pm:1019
#: install_steps_interactive.pm:1036 install_steps_interactive.pm:1052
#: install_steps_interactive.pm:1063
#, c-format
msgid "Hardware"
msgstr "Оборудование"

#: install_steps_interactive.pm:998 install_steps_interactive.pm:1007
#, c-format
msgid "Remote CUPS server"
msgstr "Удаленный сервер CUPS"

#: install_steps_interactive.pm:998
#, c-format
msgid "No printer"
msgstr "Принтера нет"

#: install_steps_interactive.pm:1040
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Есть ли у вас звуковая карта ISA?"

#: install_steps_interactive.pm:1042
#, c-format
msgid ""
"Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound "
"card"
msgstr ""
"Запустите \"alsaconf\" или \"sndconfig\" после установки, чтобы настроить "
"вашу звуковую карту"

#: install_steps_interactive.pm:1044
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Звуковая карта не обнаружена. Попробуйте запустить \"harddrake\" после "
"установки"

#: install_steps_interactive.pm:1064
#, c-format
msgid "Graphical interface"
msgstr "Графический интерфейс"

#: install_steps_interactive.pm:1070 install_steps_interactive.pm:1082
#, c-format
msgid "Network & Internet"
msgstr "Сеть и Интернет"

#: install_steps_interactive.pm:1084
#, c-format
msgid "configured"
msgstr "настроен"

#: install_steps_interactive.pm:1093 install_steps_interactive.pm:1107
#: security/level.pm:55 steps.pm:20
#, c-format
msgid "Security"
msgstr "Безопасность"

#: install_steps_interactive.pm:1112
#, c-format
msgid "activated"
msgstr "активировано"

#: install_steps_interactive.pm:1112
#, c-format
msgid "disabled"
msgstr "отключено"

#: install_steps_interactive.pm:1123
#, c-format
msgid "Boot"
msgstr "Boot"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1127 printer/printerdrake.pm:961
#, c-format
msgid "%s on %s"
msgstr "%s на %s"

#: install_steps_interactive.pm:1141 services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Службы: включено %d из %d зарегистрированных"

#: install_steps_interactive.pm:1153
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Вы еще не настраивали Х. Вы уверены, что действительно хотите этого?"

#: install_steps_interactive.pm:1234
#, c-format
msgid "Preparing bootloader..."
msgstr "Подготавливается начальный загрузчик..."

#: install_steps_interactive.pm:1244
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown machine, the yaboot bootloader "
"will not work for you. The install will continue, but you'll need to use "
"BootX or some other means to boot your machine. The kernel argument for the "
"root fs is: root=%s"
msgstr ""
"Похоже, что вы являетесь обладателем древней или неизвестной машины, "
"начальный загрузчик yaboot не будет у вас работать. Установка продолжится, "
"но вам понадобится  использовать BootX или что-то другое для загрузки вашей "
"машины. Аргумент ядра для root fs такой: root=%s"

#: install_steps_interactive.pm:1250
#, c-format
msgid "Do you want to use aboot?"
msgstr "Вы хотите использовать aboot?"

#: install_steps_interactive.pm:1253
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"Ошибка установки aboot, \n"
"попытаться форсировать установку, даже если это разрушит первый раздел?"

#: install_steps_interactive.pm:1270
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""
"На данном уровне безопасности доступ к файлам на разделе Windows разрешен "
"только администратору. "

#: install_steps_interactive.pm:1299 standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Вставьте чистую дискету в дисковод %s"

#: install_steps_interactive.pm:1304
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "Пожалуйста, вставьте другой диск с драйверами"

#: install_steps_interactive.pm:1306
#, c-format
msgid "Creating auto install floppy..."
msgstr "Создается дискета автоматической установки..."

#: install_steps_interactive.pm:1318
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Некоторые этапы не завершены.\n"
"\n"
"Вы действительно хотите сейчас выйти?"

#: install_steps_interactive.pm:1328 standalone/draksambashare:422
#: standalone/draksambashare:529 standalone/drakups:120 standalone/drakups:159
#: standalone/logdrake:452 standalone/logdrake:458
#, c-format
msgid "Congratulations"
msgstr "Поздравления"

#: install_steps_interactive.pm:1336 install_steps_interactive.pm:1337
#, c-format
msgid "Generate auto install floppy"
msgstr "Создать дискету автоматической установки"

#: install_steps_interactive.pm:1338
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"При желании автоматическая установка может быть\n"
"полностью автоматизирована, в этом случае она\n"
"полностью скопирует жесткий диск!!\n"
"(предназначается для установки на другой компьютер).\n"
"\n"
"Вы можете предпочесть повторить установку.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandriva Linux Installation %s"
msgstr "Установка Mandriva Linux %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> между элементами  | <Space> выбор | <F12> следующий экран "

#: interactive.pm:196
#, c-format
msgid "Choose a file"
msgstr "Выберите файл"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakbackup:1526
#: standalone/drakfont:657 standalone/drakhosts:242 standalone/draknfs:605
#: standalone/draksambashare:1129 standalone/drakups:301
#: standalone/drakups:361 standalone/drakups:381 standalone/drakvpn:319
#: standalone/drakvpn:680
#, c-format
msgid "Add"
msgstr "Добавить"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:249
#: standalone/draknfs:612 standalone/draksambashare:1086
#: standalone/draksambashare:1139 standalone/draksambashare:1178
#, c-format
msgid "Modify"
msgstr "Изменить"

#: interactive.pm:321 interactive/gtk.pm:508 standalone/drakhosts:256
#: standalone/draknfs:619 standalone/draksambashare:1087
#: standalone/draksambashare:1147 standalone/draksambashare:1186
#: standalone/drakups:303 standalone/drakups:363 standalone/drakups:383
#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Remove"
msgstr "Удалить"

#: interactive.pm:398
#, c-format
msgid "Basic"
msgstr "Основной"

#: interactive.pm:436 interactive/newt.pm:321 ugtk2.pm:490
#, c-format
msgid "Finish"
msgstr "Завершить"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "Выполнить"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Неудачный выбор, попробуйте еще раз\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Что вы выбираете? (по умолчанию %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Пункты, которые вы должны заполнить:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Что вы выбираете? (0/1, по умолчанию `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Кнопка: `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Вы хотите нажать на эту кнопку?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Что вы выбираете? (по умолчанию `%s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " введите `void', чтобы очистить пункт"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Существует множество вещей для выбора (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"Пожалуйста, выберите первое число из 10-значного диапазона,\n"
"которое вы хотите изменить или просто нажмите Enter для продолжения.\n"
"Ваш выбор?"

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> Запомните, метка изменилась:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Заново отправить"

#: keyboard.pm:171 keyboard.pm:203
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "Чешская (QWERTZ)"

#: keyboard.pm:172 keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "Немецкая"

#: keyboard.pm:173
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Дворака"

#: keyboard.pm:174 keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "Испанская"

#: keyboard.pm:175 keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "Финская"

#: keyboard.pm:176 keyboard.pm:225
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "Французская"

#: keyboard.pm:177 keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "Норвежская"

#: keyboard.pm:178
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "Польская"

#: keyboard.pm:179 keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "Русская"

#: keyboard.pm:181 keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "Шведская"

#: keyboard.pm:182 keyboard.pm:317
#, c-format
msgid "UK keyboard"
msgstr "UK клавиатура"

#: keyboard.pm:183 keyboard.pm:320
#, c-format
msgid "US keyboard"
msgstr "US клавиатура "

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "Албанская"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "Армянская (старая)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "Армянская (машинописная)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "Армянская (фонетическая)"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "Арабская"

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "Азербайджанская (латинская)"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "Бельгийская"

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "Bengali (Inscript-layout)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "Bengali (Probhat)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "Болгарская (фонетическая)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "Болгарская (BDS)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "Бразильская (ABNT-2)"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "Боснийская"

#: keyboard.pm:198
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr "Белорусская"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "Швейцарская (немецкая раскладка)"

#: keyboard.pm:200
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr "Швейцарская (французская раскладка)"

#: keyboard.pm:202
#, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Cherokee syllabics"

#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "Чешская (QWERTY)"

#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "Немецкая (без мертвых клавиш)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr "Деванагари"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "Датская"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Дворака (США)"

#: keyboard.pm:211
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr "Dvorak (Esperanto)"

#: keyboard.pm:213
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (French)"

#: keyboard.pm:215
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (UK)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Дворака (норвежская)"

#: keyboard.pm:218
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (Polish)"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Дворака (шведская)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "Dzongkha/Tibetan"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "Эстонская"

#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "Faroese"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "Грузинская (\"русская\" раскладка)"

#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "Грузинская (\"латинская\" раскладка)"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "Греческая"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "Греческий (polytonic)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "Гуджаратская"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "Гурмуки"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "Хорватская"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "Венгерская"

#: keyboard.pm:234
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "Ирландский"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "Израильская"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "Израильская (фонетическая)"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "Иранская"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "Исландская"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "Итальянская"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "Инуктитут"

#: keyboard.pm:244
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "Японская 106 клавиш"

#: keyboard.pm:245
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "Kannada"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "Корейская клавиатура"

#: keyboard.pm:250
#, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "Kurdish (arabic script)"

#: keyboard.pm:251
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "Киргизская клавиатура"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "Латиноамериканская"

#: keyboard.pm:254
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "Лаосская"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "Литовская AZERTY (старая)"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "Литовская AZERTY (новая)"

#: keyboard.pm:258
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "Литовская \"числовой ряд\" QWERTY"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "Литовская \"фонетическая\" QWERTY"

#: keyboard.pm:260
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "Латвийская"

#: keyboard.pm:261
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "Малайская"

#: keyboard.pm:263
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "Македонская"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "Мьянмская (Бирма)"

#: keyboard.pm:265
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "Монгольская (кириллическая)"

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "Мальтийская (UK)"

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "Мальтийская (США)"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "Голландская"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "Орисса"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "Польская (раскладка QWERTY)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "Польская (раскладка QWERTZ)"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "Pashto"

#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "Португальская"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "Канадская (Квебек)"

#: keyboard.pm:279
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "Румынская (QWERTZ)"

#: keyboard.pm:280
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "Румынская (QWERTY)"

#: keyboard.pm:282
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "Русская (фонетическая)"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr "Saami (norwegian)"

#: keyboard.pm:284
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr "Saami (swedish/finnish)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "Sindhi"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "Словенская"

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Sinhala"
msgstr "Sinhala"

#: keyboard.pm:291
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "Словацкая (QWERTZ)"

#: keyboard.pm:292
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "Словацкая (QWERTY)"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "Сербская (кириллическая)"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "Сирийский"

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "Сирийская (фонетическая)"

#: keyboard.pm:297
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr "Telugu"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "Тамильская (раскладка ISCII)"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "Тамильская (машинописная раскладка)"

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "Thai (Kedmanee)"

#: keyboard.pm:302
#, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "Thai (TIS-820)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "Thai (Pattachote)"

#: keyboard.pm:307
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (moroccan layout) (+latin/arabic)"
msgstr "Tifinagh (moroccan layout) (+latin/arabic)"

#: keyboard.pm:308
#, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (phonetic) (+latin/arabic)"
msgstr "Tifinagh (phonetic) (+latin/arabic)"

#: keyboard.pm:310
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Таджикская клавиатура"

#: keyboard.pm:312
#, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "Туркменская"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "Турецкая (традиционная модель \"F\")"

#: keyboard.pm:314
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "Турецкая (современная модель \"Q\")"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "Украинская"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "Urdu keyboard"

#: keyboard.pm:321
#, c-format
msgid "US keyboard (international)"
msgstr "US клавиатура (международная)"

#: keyboard.pm:322
#, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "Узбекская (кириллическая)"

#: keyboard.pm:324
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "Вьетнамская \"числовой ряд\" QWERTY"

#: keyboard.pm:325
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "Югославская (латинская)"

#: keyboard.pm:332
#, c-format
msgid "Right Alt key"
msgstr "Правая клавиша Alt"

#: keyboard.pm:333
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Обе клавиши Shift одновременно"

#: keyboard.pm:334
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Клавиши Control и Shift одновременно"

#: keyboard.pm:335
#, c-format
msgid "CapsLock key"
msgstr "Клавиша CapsLock"

#: keyboard.pm:336
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Клавиши Shift и CapsLock одновременно"

#: keyboard.pm:337
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Клавиши Ctrl и Alt одновременно"

#: keyboard.pm:338
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Клавиши Alt и Shift одновременно"

#: keyboard.pm:339
#, c-format
msgid "\"Menu\" key"
msgstr "Клавиша \"Меню\""

#: keyboard.pm:340
#, c-format
msgid "Left \"Windows\" key"
msgstr "Левая клавиша \"Windows\""

#: keyboard.pm:341
#, c-format
msgid "Right \"Windows\" key"
msgstr "Правая клавиша \"Windows\""

#: keyboard.pm:342
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Обе клавиши Control одновременно"

#: keyboard.pm:343
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Обе клавиши Alt одновременно"

#: keyboard.pm:344
#, c-format
msgid "Left Shift key"
msgstr "Левая клавиша Shift"

#: keyboard.pm:345
#, c-format
msgid "Right Shift key"
msgstr "Правая клавиша Shift"

#: keyboard.pm:346
#, c-format
msgid "Left Alt key"
msgstr "Левая клавиша Alt"

#: keyboard.pm:347
#, c-format
msgid "Left Control key"
msgstr "Левая клавиша Control"

#: keyboard.pm:348
#, c-format
msgid "Right Control key"
msgstr "Правая клавиша Control"

#: keyboard.pm:384
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"здесь вы можете выбрать клавишу или комбинацию клавиш, которые\n"
"позволят переключаться между различными раскладками клавиатуры\n"
"(например: латинская и русская)"

#: keyboard.pm:389
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""
"Данные настройки вступят в силу после инсталляции.\n"
"В процессе инсталляции используйте клавишу Правый Control\n"
"для переключения между различными раскладками клавиатуры."

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#. -PO: or as "default:RTL", depending if your language is written from
#. -PO: left to right, or from right to left; any other string is wrong.
#: lang.pm:178
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:195
#, c-format
msgid "Andorra"
msgstr "Андорра"

#: lang.pm:196 network/adsl_consts.pm:943
#, c-format
msgid "United Arab Emirates"
msgstr "Объединенные арабские Эмираты"

#: lang.pm:197
#, c-format
msgid "Afghanistan"
msgstr "Афганистан"

#: lang.pm:198
#, c-format
msgid "Antigua and Barbuda"
msgstr "Антигуа и Барбуда"

#: lang.pm:199
#, c-format
msgid "Anguilla"
msgstr "Ангвилла"

#: lang.pm:200
#, c-format
msgid "Albania"
msgstr "Албания"

#: lang.pm:201
#, c-format
msgid "Armenia"
msgstr "Армения"

#: lang.pm:202
#, c-format
msgid "Netherlands Antilles"
msgstr "Нидерландские антильские острова"

#: lang.pm:203
#, c-format
msgid "Angola"
msgstr "Ангола"

#: lang.pm:204
#, c-format
msgid "Antarctica"
msgstr "Антарктика"

#: lang.pm:205 network/adsl_consts.pm:55 standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "Аргентина"

#: lang.pm:206
#, c-format
msgid "American Samoa"
msgstr "Американские Самоа"

#: lang.pm:209
#, c-format
msgid "Aruba"
msgstr "Аруба"

#: lang.pm:210
#, c-format
msgid "Azerbaijan"
msgstr "Азербайджан"

#: lang.pm:211
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Босния и Герцеговина"

#: lang.pm:212
#, c-format
msgid "Barbados"
msgstr "Барбадос"

#: lang.pm:213
#, c-format
msgid "Bangladesh"
msgstr "Бангладеш"

#: lang.pm:215
#, c-format
msgid "Burkina Faso"
msgstr "Буркина-Фасо"

#: lang.pm:216 network/adsl_consts.pm:170 network/adsl_consts.pm:179
#, c-format
msgid "Bulgaria"
msgstr "Болгария"

#: lang.pm:217
#, c-format
msgid "Bahrain"
msgstr "Бахрейн"

#: lang.pm:218
#, c-format
msgid "Burundi"
msgstr "Бурунди"

#: lang.pm:219
#, c-format
msgid "Benin"
msgstr "Бенин"

#: lang.pm:220
#, c-format
msgid "Bermuda"
msgstr "Бермуды"

#: lang.pm:221
#, c-format
msgid "Brunei Darussalam"
msgstr "Бруней Даруссалам"

#: lang.pm:222
#, c-format
msgid "Bolivia"
msgstr "Боливия"

#: lang.pm:224
#, c-format
msgid "Bahamas"
msgstr "Багамы"

#: lang.pm:225
#, c-format
msgid "Bhutan"
msgstr "Бутан"

#: lang.pm:226
#, c-format
msgid "Bouvet Island"
msgstr "Остров Буве"

#: lang.pm:227
#, c-format
msgid "Botswana"
msgstr "Ботсвана"

#: lang.pm:228
#, c-format
msgid "Belarus"
msgstr "Беларусь"

#: lang.pm:229
#, c-format
msgid "Belize"
msgstr "Белиз"

#: lang.pm:231
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Кокосовые острова "

#: lang.pm:232
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Конго (Kinshasa)"

#: lang.pm:233
#, c-format
msgid "Central African Republic"
msgstr "Центрально-африканская республика"

#: lang.pm:234
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Конго (Brazzaville)"

#: lang.pm:236
#, c-format
msgid "Cote d'Ivoire"
msgstr "Кот-д'Ивуар"

#: lang.pm:237
#, c-format
msgid "Cook Islands"
msgstr "Острова Кука"

#: lang.pm:238
#, c-format
msgid "Chile"
msgstr "Чили"

#: lang.pm:239
#, c-format
msgid "Cameroon"
msgstr "Камерун"

#: lang.pm:240 network/adsl_consts.pm:188 network/adsl_consts.pm:197
#: network/adsl_consts.pm:206 network/adsl_consts.pm:215
#: network/adsl_consts.pm:224 network/adsl_consts.pm:233
#: network/adsl_consts.pm:242 network/adsl_consts.pm:251
#: network/adsl_consts.pm:260 network/adsl_consts.pm:269
#: network/adsl_consts.pm:278 network/adsl_consts.pm:287
#: network/adsl_consts.pm:296 network/adsl_consts.pm:305
#: network/adsl_consts.pm:314 network/adsl_consts.pm:323
#: network/adsl_consts.pm:332 network/adsl_consts.pm:341
#: network/adsl_consts.pm:350 network/adsl_consts.pm:359
#, c-format
msgid "China"
msgstr "Китай"

#: lang.pm:241
#, c-format
msgid "Colombia"
msgstr "Колумбия"

#: lang.pm:243
#, c-format
msgid "Serbia & Montenegro"
msgstr "Serbia & Montenegro"

#: lang.pm:244
#, c-format
msgid "Cuba"
msgstr "Куба"

#: lang.pm:245
#, c-format
msgid "Cape Verde"
msgstr "Кабо-Верде"

#: lang.pm:246
#, c-format
msgid "Christmas Island"
msgstr "Остров Рождества"

#: lang.pm:247
#, c-format
msgid "Cyprus"
msgstr "Кипр"

#: lang.pm:250
#, c-format
msgid "Djibouti"
msgstr "Джибути"

#: lang.pm:252
#, c-format
msgid "Dominica"
msgstr "Доминика"

#: lang.pm:253
#, c-format
msgid "Dominican Republic"
msgstr "Доминиканская республика"

#: lang.pm:254 network/adsl_consts.pm:44
#, c-format
msgid "Algeria"
msgstr "Алжир"

#: lang.pm:255
#, c-format
msgid "Ecuador"
msgstr "Эквадор"

#: lang.pm:257
#, c-format
msgid "Egypt"
msgstr "Египет"

#: lang.pm:258
#, c-format
msgid "Western Sahara"
msgstr "Западная Сахара"

#: lang.pm:259
#, c-format
msgid "Eritrea"
msgstr "Эритрея"

#: lang.pm:261
#, c-format
msgid "Ethiopia"
msgstr "Эфиопия"

#: lang.pm:263
#, c-format
msgid "Fiji"
msgstr "Фиджи"

#: lang.pm:264
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Фолклендские (Мальвинские) острова"

#: lang.pm:265
#, c-format
msgid "Micronesia"
msgstr "Микронезия"

#: lang.pm:266
#, c-format
msgid "Faroe Islands"
msgstr "Фарерские острова"

#: lang.pm:268
#, c-format
msgid "Gabon"
msgstr "Габон"

#: lang.pm:269 network/adsl_consts.pm:954 network/adsl_consts.pm:965
#: network/netconnect.pm:46
#, c-format
msgid "United Kingdom"
msgstr "Объединенное Королевство"

#: lang.pm:270
#, c-format
msgid "Grenada"
msgstr "Гренада"

#: lang.pm:271
#, c-format
msgid "Georgia"
msgstr "Грузия"

#: lang.pm:272
#, c-format
msgid "French Guiana"
msgstr "Французская Гвиана"

#: lang.pm:273
#, c-format
msgid "Ghana"
msgstr "Гана"

#: lang.pm:274
#, c-format
msgid "Gibraltar"
msgstr "Гибралтар"

#: lang.pm:275
#, c-format
msgid "Greenland"
msgstr "Гренландия"

#: lang.pm:276
#, c-format
msgid "Gambia"
msgstr "Гамбия"

#: lang.pm:277
#, c-format
msgid "Guinea"
msgstr "Гвинея"

#: lang.pm:278
#, c-format
msgid "Guadeloupe"
msgstr "Гваделупа"

#: lang.pm:279
#, c-format
msgid "Equatorial Guinea"
msgstr "Экваториальная Гвинея"

#: lang.pm:281
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Южная Джорджия и Южные Сандвичевы острова "

#: lang.pm:282
#, c-format
msgid "Guatemala"
msgstr "Гватемала"

#: lang.pm:283
#, c-format
msgid "Guam"
msgstr "Гуам"

#: lang.pm:284
#, c-format
msgid "Guinea-Bissau"
msgstr "Гвинея-Бисау"

#: lang.pm:285
#, c-format
msgid "Guyana"
msgstr "Гайана"

#: lang.pm:286
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "Китай (Гонконг)"

#: lang.pm:287
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Острова Херда и МакДональда"

#: lang.pm:288
#, c-format
msgid "Honduras"
msgstr "Гондурас"

#: lang.pm:289
#, c-format
msgid "Croatia"
msgstr "Хорватия"

#: lang.pm:290
#, c-format
msgid "Haiti"
msgstr "Гаити"

#: lang.pm:292
#, c-format
msgid "Indonesia"
msgstr "Индонезия"

#: lang.pm:295
#, c-format
msgid "India"
msgstr "Индия"

#: lang.pm:296
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Британская территория Индийского океана"

#: lang.pm:297
#, c-format
msgid "Iraq"
msgstr "Ирак"

#: lang.pm:298
#, c-format
msgid "Iran"
msgstr "Иран"

#: lang.pm:299
#, c-format
msgid "Iceland"
msgstr "Исландия"

#: lang.pm:301
#, c-format
msgid "Jamaica"
msgstr "Ямайка"

#: lang.pm:302
#, c-format
msgid "Jordan"
msgstr "Иордания"

#: lang.pm:304
#, c-format
msgid "Kenya"
msgstr "Кения"

#: lang.pm:305
#, c-format
msgid "Kyrgyzstan"
msgstr "Кыргызстан"

#: lang.pm:306
#, c-format
msgid "Cambodia"
msgstr "Камбоджа"

#: lang.pm:307
#, c-format
msgid "Kiribati"
msgstr "Кирибати"

#: lang.pm:308
#, c-format
msgid "Comoros"
msgstr "Коморские острова"

#: lang.pm:309
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Сент-Китс и Невис"

#: lang.pm:310
#, c-format
msgid "Korea (North)"
msgstr "Корея (North)"

#: lang.pm:311
#, c-format
msgid "Korea"
msgstr "Корея"

#: lang.pm:312
#, c-format
msgid "Kuwait"
msgstr "Кувейт"

#: lang.pm:313
#, c-format
msgid "Cayman Islands"
msgstr "Каймановы острова"

#: lang.pm:314
#, c-format
msgid "Kazakhstan"
msgstr "Казахстан"

#: lang.pm:315
#, c-format
msgid "Laos"
msgstr "Лаос"

#: lang.pm:316
#, c-format
msgid "Lebanon"
msgstr "Лебанон"

#: lang.pm:317
#, c-format
msgid "Saint Lucia"
msgstr "Сент-Люсия"

#: lang.pm:318
#, c-format
msgid "Liechtenstein"
msgstr "Лихтенштейн"

#: lang.pm:319
#, c-format
msgid "Sri Lanka"
msgstr "Шри-Ланка"

#: lang.pm:320
#, c-format
msgid "Liberia"
msgstr "Либерия"

#: lang.pm:321
#, c-format
msgid "Lesotho"
msgstr "Лесото"

#: lang.pm:322 network/adsl_consts.pm:600
#, c-format
msgid "Lithuania"
msgstr "Литва"

#: lang.pm:323
#, c-format
msgid "Luxembourg"
msgstr "Люксембург"

#: lang.pm:324
#, c-format
msgid "Latvia"
msgstr "Латвия"

#: lang.pm:325
#, c-format
msgid "Libya"
msgstr "Ливия"

#: lang.pm:326 network/adsl_consts.pm:609
#, c-format
msgid "Morocco"
msgstr "Марокко"

#: lang.pm:327
#, c-format
msgid "Monaco"
msgstr "Монако"

#: lang.pm:328
#, c-format
msgid "Moldova"
msgstr "Молдова"

#: lang.pm:329
#, c-format
msgid "Madagascar"
msgstr "Мадагаскар"

#: lang.pm:330
#, c-format
msgid "Marshall Islands"
msgstr "Маршалловы острова"

#: lang.pm:331
#, c-format
msgid "Macedonia"
msgstr "Македония"

#: lang.pm:332
#, c-format
msgid "Mali"
msgstr "Мали"

#: lang.pm:333
#, c-format
msgid "Myanmar"
msgstr "Мьянма"

#: lang.pm:334
#, c-format
msgid "Mongolia"
msgstr "Монголия"

#: lang.pm:335
#, c-format
msgid "Northern Mariana Islands"
msgstr "Острова северной Марианы"

#: lang.pm:336
#, c-format
msgid "Martinique"
msgstr "Мартиника"

#: lang.pm:337
#, c-format
msgid "Mauritania"
msgstr "Мавритания"

#: lang.pm:338
#, c-format
msgid "Montserrat"
msgstr "Монсеррат"

#: lang.pm:339
#, c-format
msgid "Malta"
msgstr "Мальта"

#: lang.pm:340
#, c-format
msgid "Mauritius"
msgstr "Маврикий"

#: lang.pm:341
#, c-format
msgid "Maldives"
msgstr "Мальдивы"

#: lang.pm:342
#, c-format
msgid "Malawi"
msgstr "Малави"

#: lang.pm:343
#, c-format
msgid "Mexico"
msgstr "Мексика"

#: lang.pm:344
#, c-format
msgid "Malaysia"
msgstr "Малайзия"

#: lang.pm:345
#, c-format
msgid "Mozambique"
msgstr "Мозамбик"

#: lang.pm:346
#, c-format
msgid "Namibia"
msgstr "Намибия"

#: lang.pm:347
#, c-format
msgid "New Caledonia"
msgstr "Новая Каледония"

#: lang.pm:348
#, c-format
msgid "Niger"
msgstr "Нигер"

#: lang.pm:349
#, c-format
msgid "Norfolk Island"
msgstr "Остров Норфолк"

#: lang.pm:350
#, c-format
msgid "Nigeria"
msgstr "Нигерия"

#: lang.pm:351
#, c-format
msgid "Nicaragua"
msgstr "Никарагуа"

#: lang.pm:354
#, c-format
msgid "Nepal"
msgstr "Непал"

#: lang.pm:355
#, c-format
msgid "Nauru"
msgstr "Науру"

#: lang.pm:356
#, c-format
msgid "Niue"
msgstr "Нью"

#: lang.pm:358
#, c-format
msgid "Oman"
msgstr "Оман"

#: lang.pm:359
#, c-format
msgid "Panama"
msgstr "Панама"

#: lang.pm:360
#, c-format
msgid "Peru"
msgstr "Перу"

#: lang.pm:361
#, c-format
msgid "French Polynesia"
msgstr "Французская Полинезия"

#: lang.pm:362
#, c-format
msgid "Papua New Guinea"
msgstr "Папуа Новая Гвинея"

#: lang.pm:363
#, c-format
msgid "Philippines"
msgstr "Филиппины"

#: lang.pm:364
#, c-format
msgid "Pakistan"
msgstr "Пакистан"

#: lang.pm:366
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Сен-Пьер и Микелон"

#: lang.pm:367
#, c-format
msgid "Pitcairn"
msgstr "Питкэрн"

#: lang.pm:368
#, c-format
msgid "Puerto Rico"
msgstr "Пуэрто-Рико"

#: lang.pm:369
#, c-format
msgid "Palestine"
msgstr "Палестина"

#: lang.pm:371
#, c-format
msgid "Paraguay"
msgstr "Парагвай"

#: lang.pm:372
#, c-format
msgid "Palau"
msgstr "Палау"

#: lang.pm:373
#, c-format
msgid "Qatar"
msgstr "Катар"

#: lang.pm:374
#, c-format
msgid "Reunion"
msgstr "Реюньон"

#: lang.pm:375
#, c-format
msgid "Romania"
msgstr "Румыния"

#: lang.pm:377
#, c-format
msgid "Rwanda"
msgstr "Руанда"

#: lang.pm:378
#, c-format
msgid "Saudi Arabia"
msgstr "Саудовская Аравия"

#: lang.pm:379
#, c-format
msgid "Solomon Islands"
msgstr "Соломоновы Острова"

#: lang.pm:380
#, c-format
msgid "Seychelles"
msgstr "Сейшельские Острова"

#: lang.pm:381
#, c-format
msgid "Sudan"
msgstr "Судан"

#: lang.pm:383
#, c-format
msgid "Singapore"
msgstr "Сингапур"

#: lang.pm:384
#, c-format
msgid "Saint Helena"
msgstr "Святая Елена"

#: lang.pm:385 network/adsl_consts.pm:747
#, c-format
msgid "Slovenia"
msgstr "Словения"

#: lang.pm:386
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Свалбард и острова Яна Майена"

#: lang.pm:388
#, c-format
msgid "Sierra Leone"
msgstr "Сьерра-Леоне"

#: lang.pm:389
#, c-format
msgid "San Marino"
msgstr "Сан-Марино"

#: lang.pm:390 network/adsl_consts.pm:737
#, c-format
msgid "Senegal"
msgstr "Сенегал"

#: lang.pm:391
#, c-format
msgid "Somalia"
msgstr "Сомали"

#: lang.pm:392
#, c-format
msgid "Suriname"
msgstr "Суринам"

#: lang.pm:393
#, c-format
msgid "Sao Tome and Principe"
msgstr "Сан-Томе и Принсипи"

#: lang.pm:394
#, c-format
msgid "El Salvador"
msgstr "Сальвадор"

#: lang.pm:395
#, c-format
msgid "Syria"
msgstr "Сирия"

#: lang.pm:396
#, c-format
msgid "Swaziland"
msgstr "Свазиленд"

#: lang.pm:397
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Острова Туркс и Каикос"

#: lang.pm:398
#, c-format
msgid "Chad"
msgstr "Чад"

#: lang.pm:399
#, c-format
msgid "French Southern Territories"
msgstr "Французские южные территории"

#: lang.pm:400
#, c-format
msgid "Togo"
msgstr "Того"

#: lang.pm:402
#, c-format
msgid "Tajikistan"
msgstr "Таджикистан"

#: lang.pm:403
#, c-format
msgid "Tokelau"
msgstr "Токелау"

#: lang.pm:404
#, c-format
msgid "East Timor"
msgstr "Восточный Тимор"

#: lang.pm:405
#, c-format
msgid "Turkmenistan"
msgstr "Туркменистан"

#: lang.pm:406 network/adsl_consts.pm:931
#, c-format
msgid "Tunisia"
msgstr "Тунис"

#: lang.pm:407
#, c-format
msgid "Tonga"
msgstr "Тонга"

#: lang.pm:408
#, c-format
msgid "Turkey"
msgstr "Турция"

#: lang.pm:409
#, c-format
msgid "Trinidad and Tobago"
msgstr "Тринидад и Тобаго"

#: lang.pm:410
#, c-format
msgid "Tuvalu"
msgstr "Тувалу"

#: lang.pm:412
#, c-format
msgid "Tanzania"
msgstr "Танзания"

#: lang.pm:413
#, c-format
msgid "Ukraine"
msgstr "Украина"

#: lang.pm:414
#, c-format
msgid "Uganda"
msgstr "Уганда"

#: lang.pm:415
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Соединенные штаты Малых  Удаленных островов"

#: lang.pm:417
#, c-format
msgid "Uruguay"
msgstr "Уругвай"

#: lang.pm:418
#, c-format
msgid "Uzbekistan"
msgstr "Узбекистан"

#: lang.pm:419
#, c-format
msgid "Vatican"
msgstr "Ватикан"

#: lang.pm:420
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Сент-Винсент и Гренадины"

#: lang.pm:421
#, c-format
msgid "Venezuela"
msgstr "Венесуэла"

#: lang.pm:422
#, c-format
msgid "Virgin Islands (British)"
msgstr "Виргинские острова (Британия)"

#: lang.pm:423
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Виргинские острова (США)"

#: lang.pm:424
#, c-format
msgid "Vietnam"
msgstr "Вьетнам"

#: lang.pm:425
#, c-format
msgid "Vanuatu"
msgstr "Вануату"

#: lang.pm:426
#, c-format
msgid "Wallis and Futuna"
msgstr "Уоллес и Футана"

#: lang.pm:427
#, c-format
msgid "Samoa"
msgstr "Самоа"

#: lang.pm:428
#, c-format
msgid "Yemen"
msgstr "Йемен"

#: lang.pm:429
#, c-format
msgid "Mayotte"
msgstr "Майот"

#: lang.pm:431
#, c-format
msgid "Zambia"
msgstr "Замбия"

#: lang.pm:432
#, c-format
msgid "Zimbabwe"
msgstr "Зимбабве"

#: lang.pm:1141
#, c-format
msgid "Welcome to %s"
msgstr "Добро пожаловать в %s"

#: lvm.pm:83
#, c-format
msgid "Moving used physical extents to other physical volumes failed"
msgstr ""
"Перемещение используемых физических областей на другой физический раздел не "
"удалось"

#: lvm.pm:135
#, c-format
msgid "Physical volume %s is still in use"
msgstr "Физический раздел %s все еще используется"

#: lvm.pm:145
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Сначала удалите логические тома\n"

#: lvm.pm:178
#, fuzzy, c-format
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr ""
"Загрузчик не может управлять разделом /boot на нескольких физических разделах"

#: modules/interactive.pm:19
#, fuzzy, c-format
msgid "This driver has no configuration parameter!"
msgstr "Настройка драйвера UPS"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Настройка модуля"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Здесь вы можете настроить каждый параметр модуля"

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "Найдены %s интерфейсы"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Есть ли у вас другой?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Есть ли у вас какие-либо %s интерфейсы?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Просмотреть информацию об оборудовании"

#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "Устанавливается драйвер для USB контроллера"

#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "Устанавливается драйвер для firewire контроллера %s"

#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "Устанавливается драйвер для контроллера жесткого диска %s"

#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "Устанавливается драйвер для ethernet контроллера %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Устанавливается драйвер для %s карты %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(модуль %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Теперь вы можете передать его параметры в модуль %s.\n"
"Помните, что любые адреса должны быть введены с префиксом 0x, напр., '0z123'"

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Теперь вы можете передать параметры в модуль %s.\n"
"Параметры должны быть в формате ``имя=значение имя2=значение2 ...''.\n"
"Например, ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "Параметры модуля:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "Какой %s драйвер мне попробовать?"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"В некоторых случаях драйверу %s нужна некоторая дополнительная информация,\n"
"хотя обычно этого не требуется. Не хотите ли вы определить для него\n"
"дополнительные параметры или позволите драйверу прозондировать вашу машину\n"
"в поисках необходимой информации? Возможно, исследование подвесит\n"
"компьютер, однако это не должно вызвать никаких неисправностей."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "Автоматическое исследование"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "Укажите параметры"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Загрузка модуля %s завершилась неудачно.\n"
"Хотите попробовать снова с другими параметрами?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "число"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d чисел, разделенных запятыми"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d строк, разделенных запятыми"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "числа, разделенные запятыми"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "строки, разделенные запятыми"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Мышь Sun"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Стандартный"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Стандартная мышь PS2 с колесиком"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/modem.pm:68 network/modem.pm:81 network/modem.pm:86
#: network/modem.pm:115 network/netconnect.pm:597 network/netconnect.pm:602
#: network/netconnect.pm:614 network/netconnect.pm:619
#: network/netconnect.pm:635 network/netconnect.pm:637
#, c-format
msgid "Automatic"
msgstr "Автоматический"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 кнопка"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Стандартная мышь с 2-мя кнопками"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Стандартная трехкнопочная мышь с эмуляцией ролика"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Колесико"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "последовательная"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Стандартная мышь с 3-мя кнопками"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan с эмуляцией ролика"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series с эмуляцией ролика"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (последовательная, старого типа C7)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Мышь Logitech (последовательная, старого типа C7) с эмуляцией ролика"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Мышь Kensington Thinking с эмуляцией ролика"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 кнопки"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 кнопки"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "Три кнопки с эмуляцией ролика"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "Универсальный"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "Любая PS/2 & USB мышь"

#: mouse.pm:89
#, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Xbox Контроллер S"

#: mouse.pm:93 standalone/drakconnect:351 standalone/drakvpn:1126
#, c-format
msgid "none"
msgstr "отсутствует"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "Мышь отсутствует"

#: mouse.pm:304 mouse.pm:367 mouse.pm:376 mouse.pm:435
#, c-format
msgid "Synaptics Touchpad"
msgstr "Synaptics Touchpad"

#: mouse.pm:561
#, c-format
msgid "Please test the mouse"
msgstr "Пожалуйста, проверьте свою мышь"

#: mouse.pm:563
#, c-format
msgid "To activate the mouse,"
msgstr "Чтобы привести мышь в действие,"

#: mouse.pm:564
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "ПОКРУТИТЕ КОЛЕСИКО!"

#: network/drakfirewall.pm:12 share/compssUsers.pl:85
#, c-format
msgid "Web Server"
msgstr "Веб-сервер"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Сервер доменных имен"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "Сервер SSH"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "Сервер FTP"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Почтовый сервер"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "Сервер POP и IMAP"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "Сервер Telnet"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "Совместное использование файлов Windows (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "Сервер CUPS"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "Echo запрос (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "BitTorrent"

#: network/drakfirewall.pm:74
#, c-format
msgid "Port scan detection"
msgstr "Обнаружение сканирования портов"

#: network/drakfirewall.pm:165
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandriva Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized Mandriva Security Firewall distribution."
msgstr ""
"Конфигуратор drakfirewall\n"
"\n"
"Он настраивает персональный файервол для этой машины Mandriva Linux.\n"
"Для создания специализированного мощного файервола, пожалуйста, загляните\n"
"в специализированный дистрибутив Mandriva Security Firewall."

#: network/drakfirewall.pm:171
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"Конфигуратор drakfirewall\n"
"\n"
"Перед тем, как продолжить, убедитесь, что вы настроили свой доступ к\n"
"Интернету/локальной сети при помощи drakconnect."

#: network/drakfirewall.pm:188
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "К каким службам вы хотите разрешить доступ из Интернета?"

#: network/drakfirewall.pm:191
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Вы можете ввести различные порты.\n"
"Действительные примеры: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Информацию можно найти в /etc/services."

#: network/drakfirewall.pm:197
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Указан неверный порт: %s.\n"
"Правильный формат - \"порт/tcp\" или \"порт/udp\",\n"
"где порт должен быть между 1 и 65535.\n"
"\n"
"Вы можете также задать диапазон портов (типа: 24300:24350/udp)"

#: network/drakfirewall.pm:207
#, c-format
msgid "Everything (no firewall)"
msgstr "Ко всем (файервол отключен)"

#: network/drakfirewall.pm:209
#, c-format
msgid "Other ports"
msgstr "Другие порты"

#: network/drakfirewall.pm:251 network/drakfirewall.pm:254
#: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
#: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:202
#: standalone/net_applet:385 standalone/net_applet:422
#, c-format
msgid "Interactive Firewall"
msgstr "Интерактивный файервол"

#: network/drakfirewall.pm:252
#, c-format
msgid ""
"You can be warned when someone accesses to a service or tries to intrude "
"into your computer.\n"
"Please select which network activity should be watched."
msgstr ""
"Вы можете получить уведомление, когда кто-нибудь обращается к службе или "
"пытается проникнуть в ваш компьютер.\n"
"Пожалуйста, выберите за какой сетевой активностью нужно следить."

#: network/drakfirewall.pm:257
#, c-format
msgid "Use Interactive Firewall"
msgstr "Использовать интерактивный файервол"

#: network/ifw.pm:136
#, c-format
msgid "Port scanning"
msgstr "Сканирование портов"

#: network/ifw.pm:137
#, c-format
msgid "Service attack"
msgstr "Атака службы"

#: network/ifw.pm:138
#, c-format
msgid "Password cracking"
msgstr "Взлом пароля"

#: network/ifw.pm:139
#, c-format
msgid "\"%s\" attack"
msgstr "\"%s\" атака"

#: network/ifw.pm:141
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr "Обнаружена атака на сканирование портов с %s."

#: network/ifw.pm:142
#, c-format
msgid "The %s service has been attacked by %s."
msgstr "Служба %s был атакована с %s."

#: network/ifw.pm:143
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr "Обнаружена атака на взлом пароля с %s."

#: network/ifw.pm:144
#, c-format
msgid "A \"%s\" attack has been attempted by %s"
msgstr "Обнаружена \" %s\" атака с %s."

#: network/isdn.pm:117 network/netconnect.pm:464 network/netconnect.pm:558
#: network/netconnect.pm:561 network/netconnect.pm:704
#: network/netconnect.pm:708
#, c-format
msgid "Unlisted - edit manually"
msgstr "Нет в списке - отредактируйте вручную"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:160 network/netconnect.pm:396
#, c-format
msgid "I do not know"
msgstr "Я не знаю"

#: network/isdn.pm:161 network/netconnect.pm:396
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:162 network/netconnect.pm:396
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:47 network/modem.pm:48 network/modem.pm:49
#: network/netconnect.pm:602 network/netconnect.pm:619
#: network/netconnect.pm:635
#, c-format
msgid "Manual"
msgstr "Вручную"

#: network/ndiswrapper.pm:27
#, c-format
msgid "No device supporting the %s ndiswrapper driver is present!"
msgstr "Не обнаружено устройств, поддерживающих %s ndiswrapper драйвер!"

#: network/ndiswrapper.pm:33
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr "Пожалуйста, выберите драйвер Windows (.inf файл)"

#: network/ndiswrapper.pm:42
#, c-format
msgid "Unable to install the %s ndiswrapper driver!"
msgstr "Не удается установить %s ndiswrapper драйвер!"

#: network/ndiswrapper.pm:89
#, c-format
msgid "Unable to load the ndiswrapper module!"
msgstr "Не удается загрузить модуль ndiswrapper!"

#: network/ndiswrapper.pm:95
#, c-format
msgid ""
"The selected device has already been configured with the %s driver.\n"
"Do you really want to use a ndiswrapper driver?"
msgstr ""
"Выбранное устройство уже было настроено на использование драйвера %s.\n"
"Вы действительно желаете использовать драйвер ndiswrapper?"

#: network/ndiswrapper.pm:101
#, c-format
msgid "Unable to find the ndiswrapper interface!"
msgstr "Не удается найти интерфейс ndiswrapper!"

#: network/netconnect.pm:69 network/netconnect.pm:494
#: network/netconnect.pm:506
#, c-format
msgid "Manual choice"
msgstr "Самостоятельный выбор"

#: network/netconnect.pm:69
#, c-format
msgid "Internal ISDN card"
msgstr "Внутренняя карта ISDN"

#: network/netconnect.pm:80 printer/printerdrake.pm:1622 standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "Ручная настройка"

#: network/netconnect.pm:81 standalone/drakroam:121
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "Автоматический IP (BOOTP/DHCP)"

#: network/netconnect.pm:83
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "Автоматический IP (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:86
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Протокол для всего остального мира"

#: network/netconnect.pm:88 standalone/drakconnect:563
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Европейский протокол (EDSS1)"

#: network/netconnect.pm:89 standalone/drakconnect:564
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"Протокол для всего остального мира\n"
"Отсутствует D-канал (выделенные линии)"

#: network/netconnect.pm:103 standalone/harddrake2:329
#: standalone/net_monitor:102 standalone/net_monitor:103
#: standalone/net_monitor:108
#, c-format
msgid "unknown"
msgstr "неопределенный"

#: network/netconnect.pm:120 network/thirdparty.pm:219
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch USB modem"

#: network/netconnect.pm:121
#, c-format
msgid "Sagem USB modem"
msgstr "Sagem USB модем"

#: network/netconnect.pm:122
#, c-format
msgid "Bewan modem"
msgstr "Bewan модем"

#: network/netconnect.pm:123
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "ECI Hi-Focus модем"

#: network/netconnect.pm:127
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr "Протокол динамической конфигурации хоста (DHCP)"

#: network/netconnect.pm:128
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "Ручная настройка TCP/IP"

#: network/netconnect.pm:129
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr "Протокол туннелирования между узлами (PPTP)"

#: network/netconnect.pm:130
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr "PPP через Ethernet (PPPoE)"

#: network/netconnect.pm:131
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr "PPP через ATM (PPPoA)"

#: network/netconnect.pm:132
#, c-format
msgid "DSL over CAPI"
msgstr "DSL через CAPI"

#: network/netconnect.pm:136
#, c-format
msgid "Bridged Ethernet LLC"
msgstr "Bridged Ethernet LLC"

#: network/netconnect.pm:137
#, c-format
msgid "Bridged Ethernet VC"
msgstr "Bridged Ethernet VC"

#: network/netconnect.pm:138
#, c-format
msgid "Routed IP LLC"
msgstr "Routed IP LLC"

#: network/netconnect.pm:139
#, c-format
msgid "Routed IP VC"
msgstr "Routed IP VC"

#: network/netconnect.pm:140
#, c-format
msgid "PPPoA LLC"
msgstr "PPPoA LLC"

#: network/netconnect.pm:141
#, c-format
msgid "PPPoA VC"
msgstr "PPPoA VC"

#: network/netconnect.pm:145 standalone/drakconnect:498
#, c-format
msgid "Script-based"
msgstr "На базе скрипта"

#: network/netconnect.pm:146 standalone/drakconnect:498
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:147 standalone/drakconnect:498
#, c-format
msgid "Terminal-based"
msgstr "На базе терминала"

#: network/netconnect.pm:148 standalone/drakconnect:498
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:149 standalone/drakconnect:498
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:251 standalone/drakconnect:56
#, c-format
msgid "Network & Internet Configuration"
msgstr "Настройка сети и интернета"

#: network/netconnect.pm:257
#, c-format
msgid "LAN connection"
msgstr "Соединение по локальной сети"

#: network/netconnect.pm:258 network/netconnect.pm:277 standalone/drakroam:182
#: standalone/drakroam:220 standalone/drakroam:223
#, c-format
msgid "Wireless connection"
msgstr "Беспроводное соединение"

#: network/netconnect.pm:259
#, c-format
msgid "ADSL connection"
msgstr "Соединение ADSL"

#: network/netconnect.pm:260
#, c-format
msgid "Cable connection"
msgstr "Кабельное соединение"

#: network/netconnect.pm:261
#, c-format
msgid "ISDN connection"
msgstr "Соединение ISDN"

#: network/netconnect.pm:262
#, c-format
msgid "Modem connection"
msgstr "Модемное соединение"

#: network/netconnect.pm:263
#, c-format
msgid "DVB connection"
msgstr "DVB соединение"

#: network/netconnect.pm:273
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Выберите соединение, которое вы хотите настроить"

#: network/netconnect.pm:288 network/netconnect.pm:782
#, c-format
msgid "Connection Configuration"
msgstr "Настройка соединения"

#: network/netconnect.pm:288 network/netconnect.pm:783
#, c-format
msgid "Please fill or check the field below"
msgstr "Пожалуйста, заполните или проверьте представленные ниже поля"

#: network/netconnect.pm:291
#, c-format
msgid "Your personal phone number"
msgstr "Ваш личный телефонный номер"

#: network/netconnect.pm:292 network/netconnect.pm:786
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Имя провайдера (например, provider.net)"

#: network/netconnect.pm:293 standalone/drakconnect:493
#, c-format
msgid "Provider phone number"
msgstr "Номер телефона провайдера"

#: network/netconnect.pm:294
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr "Первый DNS провайдера (опционально)"

#: network/netconnect.pm:295
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr "Второй DNS провайдера (опционально)"

#: network/netconnect.pm:296 standalone/drakconnect:444
#, c-format
msgid "Dialing mode"
msgstr "Режим дозвона"

#: network/netconnect.pm:297 standalone/drakconnect:449
#: standalone/drakconnect:517
#, c-format
msgid "Connection speed"
msgstr "Скорость соединения"

#: network/netconnect.pm:298 standalone/drakconnect:454
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Тайм-аут соединения (в секундах)"

#: network/netconnect.pm:299 network/netconnect.pm:324
#: network/netconnect.pm:789 standalone/drakconnect:491
#, c-format
msgid "Account Login (user name)"
msgstr "Логин (имя пользователя)"

#: network/netconnect.pm:300 network/netconnect.pm:325
#: network/netconnect.pm:790 standalone/drakconnect:492
#, c-format
msgid "Account Password"
msgstr "Пароль"

#: network/netconnect.pm:301 standalone/drakconnect:554
#, c-format
msgid "Card IRQ"
msgstr "IRQ карты"

#: network/netconnect.pm:302 standalone/drakconnect:555
#, c-format
msgid "Card mem (DMA)"
msgstr "Память карты (DMA)"

#: network/netconnect.pm:303 standalone/drakconnect:556
#, c-format
msgid "Card IO"
msgstr "IO карты"

#: network/netconnect.pm:304 standalone/drakconnect:557
#, c-format
msgid "Card IO_0"
msgstr "IO_0 карты"

#: network/netconnect.pm:305
#, c-format
msgid "Card IO_1"
msgstr "IO_1 карты"

#: network/netconnect.pm:320
#, c-format
msgid "Cable: account options"
msgstr "Кабельное: параметры аккаунта"

#: network/netconnect.pm:323
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr "Использовать BPALogin (нужно для Telstra)"

#: network/netconnect.pm:349 network/netconnect.pm:671
#: network/netconnect.pm:822 network/netconnect.pm:1162
#, c-format
msgid "Select the network interface to configure:"
msgstr "Выберите сетевой интерфейс для настройки:"

#: network/netconnect.pm:351 network/netconnect.pm:386
#: network/netconnect.pm:672 network/netconnect.pm:824 network/shorewall.pm:70
#: standalone/drakconnect:713
#, c-format
msgid "Net Device"
msgstr "Сетевое устройство"

#: network/netconnect.pm:352 network/netconnect.pm:357
#, c-format
msgid "External ISDN modem"
msgstr "Внешний модем ISDN"

#: network/netconnect.pm:385 standalone/harddrake2:216
#, c-format
msgid "Select a device!"
msgstr "Выберите устройство!"

#: network/netconnect.pm:394 network/netconnect.pm:404
#: network/netconnect.pm:414 network/netconnect.pm:447
#: network/netconnect.pm:461
#, c-format
msgid "ISDN Configuration"
msgstr "Настройка ISDN"

#: network/netconnect.pm:395
#, c-format
msgid "What kind of card do you have?"
msgstr "Какой у вас тип карты?"

#: network/netconnect.pm:405
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Если у вас карта ISA, то значения на следующем экране должны быть верными.\n"
"\n"
"Если у вас карта PCMCIA, то вы должны знать \"irq\" и \"io\" своей карты.\n"

#: network/netconnect.pm:409
#, c-format
msgid "Continue"
msgstr "Продолжить"

#: network/netconnect.pm:409
#, c-format
msgid "Abort"
msgstr "Прервать"

#: network/netconnect.pm:415
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Какая из следущих карт ISDN является вашей?"

#: network/netconnect.pm:433
#, c-format
msgid ""
"A CAPI driver is available for this modem. This CAPI driver can offer more "
"capabilities than the free driver (like sending faxes). Which driver do you "
"want to use?"
msgstr ""
"Для этого модема доступен драйвер CAPI. Этот драйвер CAPI может дать больше "
"возможностей чем свободный драйвер (например, посылка факсов). Какой драйвер "
"вы будете использовать?"

#: network/netconnect.pm:435 standalone/drakconnect:109 standalone/drakups:251
#: standalone/harddrake2:133
#, c-format
msgid "Driver"
msgstr "Драйвер"

#: network/netconnect.pm:447
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Какой протокол вы хотите использовать?"

#: network/netconnect.pm:449 standalone/drakconnect:109
#: standalone/drakconnect:300 standalone/drakconnect:562
#: standalone/drakids:207 standalone/drakvpn:1128
#, c-format
msgid "Protocol"
msgstr "Протокол"

#: network/netconnect.pm:461
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"Выберите своего провайдера.\n"
"Если его нет в списке, выберите Unlisted."

#: network/netconnect.pm:463 network/netconnect.pm:557
#: network/netconnect.pm:703
#, c-format
msgid "Provider:"
msgstr "Провайдер:"

#: network/netconnect.pm:472
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Ваш модем не поддерживается системой.\n"
"Загляните на http://www.linmodems.org"

#: network/netconnect.pm:491
#, c-format
msgid "Select the modem to configure:"
msgstr "Выберите модем для настройки:"

#: network/netconnect.pm:526
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr ""
"Пожалуйста, выберите, к какому последовательному порту подключен ваш модем."

#: network/netconnect.pm:555
#, c-format
msgid "Select your provider:"
msgstr "Выберите своего провайдера:"

#: network/netconnect.pm:579
#, c-format
msgid "Dialup: account options"
msgstr "Dialup: параметры аккаунта"

#: network/netconnect.pm:582
#, c-format
msgid "Connection name"
msgstr "Название соединения"

#: network/netconnect.pm:583
#, c-format
msgid "Phone number"
msgstr "Номер телефона"

#: network/netconnect.pm:584
#, c-format
msgid "Login ID"
msgstr "ID логина"

#: network/netconnect.pm:599 network/netconnect.pm:632
#, c-format
msgid "Dialup: IP parameters"
msgstr "Dialup: IP параметры"

#: network/netconnect.pm:602
#, c-format
msgid "IP parameters"
msgstr "Параметры IP"

#: network/netconnect.pm:603 network/netconnect.pm:933
#: printer/printerdrake.pm:460 standalone/drakconnect:109
#: standalone/drakconnect:316 standalone/drakconnect:882
#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
#, c-format
msgid "IP address"
msgstr "IP-адрес"

#: network/netconnect.pm:604
#, c-format
msgid "Subnet mask"
msgstr "Маска подсети"

#: network/netconnect.pm:616
#, c-format
msgid "Dialup: DNS parameters"
msgstr "Dialup: DNS параметры"

#: network/netconnect.pm:619
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:620
#, c-format
msgid "Domain name"
msgstr "Имя домена"

#: network/netconnect.pm:621 network/netconnect.pm:787
#: standalone/drakconnect:992
#, c-format
msgid "First DNS Server (optional)"
msgstr "Первый сервер DNS (необязательно)"

#: network/netconnect.pm:622 network/netconnect.pm:788
#: standalone/drakconnect:993
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Второй сервер DNS (необязательно)"

#: network/netconnect.pm:623
#, c-format
msgid "Set hostname from IP"
msgstr "Установить имя хоста из IP"

#: network/netconnect.pm:635 standalone/drakconnect:327
#, c-format
msgid "Gateway"
msgstr "Шлюз"

#: network/netconnect.pm:636 standalone/drakroam:124
#, c-format
msgid "Gateway IP address"
msgstr "IP-адрес шлюза"

#: network/netconnect.pm:671
#, c-format
msgid "ADSL configuration"
msgstr "Настройка ADSL"

#: network/netconnect.pm:701
#, c-format
msgid "Please choose your ADSL provider"
msgstr "Пожалуйста, выберите вашего провайдера ADSL"

#: network/netconnect.pm:731
#, c-format
msgid ""
"Please choose your DSL connection type.\n"
"If you do not know it, keep the preselected type."
msgstr ""
"Пожалуйста, выберите свой тип DSL соединения.\n"
"Если вы не в курсе что выбирать, оставьте предустановленный вариант."

#: network/netconnect.pm:734
#, c-format
msgid "ADSL connection type:"
msgstr "Тип соединения ADSL :"

#: network/netconnect.pm:792
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr "Virtual Path ID (VPI):"

#: network/netconnect.pm:793
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr "Virtual Circuit ID (VCI):"

#: network/netconnect.pm:796
#, c-format
msgid "Encapsulation:"
msgstr "Инкапсуляция :"

#: network/netconnect.pm:826
#, c-format
msgid "Manually load a driver"
msgstr "Загрузить драйвер вручную"

#: network/netconnect.pm:827
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr "Использовать драйвер Windows (с ndiswrapper)"

#: network/netconnect.pm:888
#, c-format
msgid "Zeroconf hostname resolution"
msgstr "Разрешение имени хоста Zeroconf"

#: network/netconnect.pm:889 network/netconnect.pm:920
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Настраивается сетевое устройство %s (драйвер %s)"

#: network/netconnect.pm:890
#, c-format
msgid ""
"The following protocols can be used to configure a LAN connection. Please "
"choose the one you want to use"
msgstr ""
"Следующие протоколы можно использовать для настройки LAN соединения.Выберите "
"один, который желаете использовать"

#: network/netconnect.pm:921
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Пожалуйста, введите настройку IP для этой машины.\n"
"Каждый пункт должен быть введен как IP-адрес в виде записи\n"
"десятичных чисел, разделенных точками (например, 1.2.3.4)."

#: network/netconnect.pm:928 standalone/drakconnect:373
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Определить имя хоста из DHCP адреса"

#: network/netconnect.pm:929 standalone/drakconnect:375
#, c-format
msgid "DHCP host name"
msgstr "Имя хоста DHCP"

#: network/netconnect.pm:934 standalone/drakconnect:321
#: standalone/drakconnect:883 standalone/drakgw:181
#, c-format
msgid "Netmask"
msgstr "Маска сети"

#: network/netconnect.pm:936 standalone/drakconnect:437
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "Использовать id сетевой карты (полезно для ноутбуков)"

#: network/netconnect.pm:937 standalone/drakconnect:438
#, c-format
msgid "Network Hotplugging"
msgstr "Network Hotplugging"

#: network/netconnect.pm:939 standalone/drakconnect:432
#, c-format
msgid "Start at boot"
msgstr "Запускать при загрузке"

#: network/netconnect.pm:941 standalone/drakconnect:460
#, c-format
msgid "Metric"
msgstr "Метрика"

#: network/netconnect.pm:942
#, c-format
msgid "Enable IPv6 to IPv4 tunnel"
msgstr "Разрешить туннель IPv6 в IPv4"

#: network/netconnect.pm:944 standalone/drakconnect:369
#: standalone/drakconnect:886
#, c-format
msgid "DHCP client"
msgstr "Клиент DHCP"

#: network/netconnect.pm:946 standalone/drakconnect:379
#, c-format
msgid "DHCP timeout (in seconds)"
msgstr "DHCP тайм-аут (в секундах)"

#: network/netconnect.pm:947 standalone/drakconnect:382
#, c-format
msgid "Get DNS servers from DHCP"
msgstr "Получать DNS сервера от DHCP"

#: network/netconnect.pm:948 standalone/drakconnect:383
#, c-format
msgid "Get YP servers from DHCP"
msgstr "Получать YP сервера от DHCP"

#: network/netconnect.pm:949 standalone/drakconnect:384
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr "Получать NTPD сервера от DHCP"

#: network/netconnect.pm:957 printer/printerdrake.pm:1876
#: standalone/drakconnect:676
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP-адрес должен быть в формате 1.2.3.4"

#: network/netconnect.pm:961 standalone/drakconnect:680
#, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "Маска сети должна быть в формате 255.255.224.0"

#: network/netconnect.pm:965
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr "Предупреждение : IP address %s обычно зарезервирован!"

#: network/netconnect.pm:970 standalone/drakTermServ:1856
#: standalone/drakTermServ:1857 standalone/drakTermServ:1858
#, c-format
msgid "%s already in use\n"
msgstr "%s уже используется\n"

#: network/netconnect.pm:1010
#, c-format
msgid "Choose an ndiswrapper driver"
msgstr "Выберите ndiswrapper драйвер"

#: network/netconnect.pm:1012
#, c-format
msgid "Use the ndiswrapper driver %s"
msgstr "Использовать драйвер ndiswrapper %s"

#: network/netconnect.pm:1012
#, c-format
msgid "Install a new driver"
msgstr "Установить новый драйвер"

#: network/netconnect.pm:1024
#, c-format
msgid "Select a device:"
msgstr "Выбрать устройство:"

#: network/netconnect.pm:1053
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Введите беспроводные параметры для этой карты:"

#: network/netconnect.pm:1056 standalone/drakconnect:404
#: standalone/drakroam:52
#, c-format
msgid "Operating Mode"
msgstr "Режим управления"

#: network/netconnect.pm:1057
#, c-format
msgid "Ad-hoc"
msgstr "Ad-hoc"

#: network/netconnect.pm:1057
#, c-format
msgid "Managed"
msgstr "Управляемый"

#: network/netconnect.pm:1057
#, c-format
msgid "Master"
msgstr "Мастер"

#: network/netconnect.pm:1057
#, c-format
msgid "Repeater"
msgstr "Повторитель"

#: network/netconnect.pm:1057
#, c-format
msgid "Secondary"
msgstr "Вторичный"

#: network/netconnect.pm:1057
#, c-format
msgid "Auto"
msgstr "Авто"

#: network/netconnect.pm:1060 standalone/drakconnect:405
#: standalone/drakroam:115
#, c-format
msgid "Network name (ESSID)"
msgstr "Сетевое имя (ESSID)"

#: network/netconnect.pm:1061 standalone/drakroam:116
#, c-format
msgid "Encryption mode"
msgstr "Режим шифрования"

#: network/netconnect.pm:1066
#, c-format
msgid "Allow access point roaming"
msgstr "Разрешить роуминг точки доступа"

#: network/netconnect.pm:1068 standalone/drakconnect:406
#, c-format
msgid "Network ID"
msgstr "Сетевой ID"

#: network/netconnect.pm:1069 standalone/drakconnect:407
#, c-format
msgid "Operating frequency"
msgstr "Рабочая частота"

#: network/netconnect.pm:1070 standalone/drakconnect:408
#, c-format
msgid "Sensitivity threshold"
msgstr "Порог чувствительности"

#: network/netconnect.pm:1071 standalone/drakconnect:409
#, c-format
msgid "Bitrate (in b/s)"
msgstr "Bitrate (in b/s)"

#: network/netconnect.pm:1072 standalone/drakconnect:420
#, c-format
msgid "RTS/CTS"
msgstr "RTS/CTS"

#: network/netconnect.pm:1073
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""
"RTS/CTS добавляет handshake перед передачей каждого пакета для проверки\n"
"чистоты канала. При этом передается избыточная информация, но это улучшает\n"
"качество связи в случае наличия узлов, находящихся вне прямой видимости,\n"
"или большого числа активных узлов.\n"
"Этот параметр устанавливает минимальный размер пакета, для которого узел\n"
"посылает RTS, значение равное максимальному размеру пакета отключает схему.\n"
" Вы также можете установить значение этого параметра в auto, fixed или off."

#: network/netconnect.pm:1080 standalone/drakconnect:421
#, c-format
msgid "Fragmentation"
msgstr "Фрагментация"

#: network/netconnect.pm:1081 standalone/drakconnect:422
#, c-format
msgid "iwconfig command extra arguments"
msgstr "Дополнительные аргументы команды iwconfig"

#: network/netconnect.pm:1082
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""
"Здесь настраиваются некоторые дополнительные беспроводные параметры:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick уже установлен "
"как hostname).\n"
"\n"
"Читайте iwconfig(8) man страницу для получения подробной информации."

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1089 standalone/drakconnect:423
#, c-format
msgid "iwspy command extra arguments"
msgstr "Дополнительные аргументы команды iwspy"

#: network/netconnect.pm:1090
#, c-format
msgid ""
"iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""
"iwspy используется для настройки списка адресов беспроводного\n"
"сетевого интерфейса и получения информации о качестве линка\n"
"каждого из них.\n"
"\n"
"Эта же информация доступна в /proc/net/wireless :\n"
"качество линка, мощность сигнала и уровень шума.\n"
"\n"
"Читайте iwpspy(8) man страницу для получения подробной информации."

#: network/netconnect.pm:1099 standalone/drakconnect:424
#, c-format
msgid "iwpriv command extra arguments"
msgstr "Дополнительные аргументы команды iwpriv"

#: network/netconnect.pm:1100
#, c-format
msgid ""
"iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""
"iwpriv позволяет установить опциональные (собственные) параметры "
"беспроводного сетевого\n"
"интерфейса\n"
"\n"
"iwpriv работает с параметрами и установками, специфичными для каждого "
"драйвера (в то время как\n"
"iwconfig работает только с общими параметрами).\n"
"\n"
"По теории, в документации к каждому драйверу должно быть описано\n"
"как использовать специфические для данного интерфейса команды и\n"
"к чему они приведут.\n"
"\n"
"Читайте iwpriv(8) man страницу для получения подробной информации."

#: network/netconnect.pm:1115
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""
"Freq должна иметь суффикс k, M или G (например, \"2.46G\" для частоты 2.46 "
"GHz), или добавьте нужное количество '0' (нулей)."

#: network/netconnect.pm:1119
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""
"Rate должна иметь суффикс k, M или G (например, \"11M\" для 11M), или "
"добавьте нужное количество '0' (нулей)."

#: network/netconnect.pm:1162
#, c-format
msgid "DVB configuration"
msgstr "DVB настройка"

#: network/netconnect.pm:1163
#, c-format
msgid "DVB Adapter"
msgstr "DVB адаптер"

#: network/netconnect.pm:1180
#, c-format
msgid "DVB adapter settings"
msgstr "Настройки DVB адаптера"

#: network/netconnect.pm:1183
#, c-format
msgid "Adapter card"
msgstr "Карта адаптера"

#: network/netconnect.pm:1184
#, c-format
msgid "Net demux"
msgstr "Сеть demux"

#: network/netconnect.pm:1185
#, c-format
msgid "PID"
msgstr "PID"

#: network/netconnect.pm:1213
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Пожалуйста, введите имя своего хоста.\n"
"Имя вашего хоста должно быть полностью определенным именем\n"
"хоста, таким как ``mybox.mylab.myco.com''. Вы можете также \n"
"ввести IP-адрес шлюза, если он у вас есть"

#: network/netconnect.pm:1218
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr "В конце концов вы можете также набрать в вашем DNS сервере IP адреса."

#: network/netconnect.pm:1220 standalone/drakconnect:991
#, c-format
msgid "Host name (optional)"
msgstr "Имя хоста (опционально)"

#: network/netconnect.pm:1220 standalone/drakhosts:197
#, c-format
msgid "Host name"
msgstr "Имя хоста"

#: network/netconnect.pm:1222
#, c-format
msgid "DNS server 1"
msgstr "DNS сервер 1"

#: network/netconnect.pm:1223
#, c-format
msgid "DNS server 2"
msgstr "DNS сервер 2"

#: network/netconnect.pm:1224
#, c-format
msgid "DNS server 3"
msgstr "DNS сервер 3"

#: network/netconnect.pm:1225
#, c-format
msgid "Search domain"
msgstr "Поиск домена"

#: network/netconnect.pm:1226
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""
"По умолчанию значение search domain будет взято из полностью проверенного "
"имени хоста"

#: network/netconnect.pm:1227
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Шлюз (например, %s)"

#: network/netconnect.pm:1229
#, c-format
msgid "Gateway device"
msgstr "Шлюзовое устройство"

#: network/netconnect.pm:1238
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Адрес DNS-сервера должен быть в формате 1.2.3.4"

#: network/netconnect.pm:1243 standalone/drakconnect:685
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Адрес шлюза должен быть в формате 1.2.3.4"

#: network/netconnect.pm:1256
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""
"Если желаете, введите имя хоста Zeroconf.\n"
"Это имя машины будет использоваться для представления всех\n"
"ее разделяемых ресурсов, которые не управляются сетью.\n"
"Это необходимо для большинства сетей."

#: network/netconnect.pm:1260
#, c-format
msgid "Zeroconf Host name"
msgstr "Имя хоста zeroconf"

#: network/netconnect.pm:1263
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Имя хоста Zeroconf не должно содержать a ."

#: network/netconnect.pm:1273
#, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "Желаете ли вы позволить пользователям запускать соединение?"

#: network/netconnect.pm:1286
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Хотите ли вы запускать подключение при загрузке?"

#: network/netconnect.pm:1302
#, c-format
msgid "Automatically at boot"
msgstr "Автоматически при загрузке"

#: network/netconnect.pm:1304
#, c-format
msgid "By using Net Applet in the system tray"
msgstr "Используя аплет Net в системном лотке"

#: network/netconnect.pm:1306
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr "Вручную (интерфейс будет активироваться при загрузке)"

#: network/netconnect.pm:1315
#, c-format
msgid "How do you want to dial this connection?"
msgstr "Как вы желаете подключать данное соединение?"

#: network/netconnect.pm:1328
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Хотите попытаться сейчас подключится к Интернету?"

#: network/netconnect.pm:1336 standalone/drakconnect:1023
#, c-format
msgid "Testing your connection..."
msgstr "Проверяется ваше соединение..."

#: network/netconnect.pm:1361
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Сейчас система подключена к Интернету."

#: network/netconnect.pm:1362
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Из соображений безопасности, соединение сейчас будет разорвано."

#: network/netconnect.pm:1363
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Похоже, что система не подключилась к Интернету.\n"
"Попробуйте перенастроить свое соединение."

#: network/netconnect.pm:1378
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Поздравляем, настройка сети и подключения к Интернет завершена.\n"
"\n"

#: network/netconnect.pm:1381
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"После этого мы рекомендуем перезапустить свою среду Х, чтобы избежать "
"проблем, связанных со сменой имени хоста."

#: network/netconnect.pm:1382
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not "
"work, you might want to relaunch the configuration."
msgstr ""
"Во время настройки возникли проблемы.\n"
"Проверьте свое подключение при помощи net_monitor или mcc. Если ваше "
"подключение не работает, вы можете перезапустить настройку."

#: network/netconnect.pm:1393
#, c-format
msgid "(detected on port %s)"
msgstr "(найден на порту %s)"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:1395
#, c-format
msgid "(detected %s)"
msgstr "(обнаружено %s)"

#: network/netconnect.pm:1395
#, c-format
msgid "(detected)"
msgstr "(обнаружено)"

#: network/netconnect.pm:1396
#, c-format
msgid "Network Configuration"
msgstr "Настройка сети"

#: network/netconnect.pm:1397
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""
"Поскольку вы производите установку сети, ваша сеть уже настроена.\n"
"Нажмите ОК, чтобы сохранить текущие настройки, или Отмена, чтобы\n"
"перенастроить свое подключение к Интернету и локальной сети.\n"

#: network/netconnect.pm:1400
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "Нужно перезапустить сеть. Вы хотите перезапустить ее?"

#: network/netconnect.pm:1401
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Возникла проблема при перезагрузке сети: \n"
"\n"
"%s"

#: network/netconnect.pm:1402
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"Сейчас мы собираемся настроить %s соединение.\n"
"\n"
"\n"
"Нажмите \"%s\" для продолжения."

#: network/netconnect.pm:1403
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "Конфигурация завершена, хотите применить настройки?"

#: network/netconnect.pm:1404
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Вы настроили несколько типов подключения к Интернету.\n"
"Выберите то, которое вы хотите использовать.\n"
"\n"

#: network/netconnect.pm:1405
#, c-format
msgid "Internet connection"
msgstr "Подключение к Интернет"

#: network/netconnect.pm:1422
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""
"Возникла неожиданная ошибка:\n"
"%s"

#: network/network.pm:408
#, c-format
msgid "Proxies configuration"
msgstr "Настройка прокси"

#: network/network.pm:409
#, c-format
msgid ""
"Here you can set up your proxies configuration (eg: http://"
"my_caching_server:8080"
msgstr ""

#: network/network.pm:410
#, c-format
msgid "HTTP proxy"
msgstr "HTTP-прокси"

#: network/network.pm:411
#, c-format
msgid "FTP proxy"
msgstr "FTP-прокси"

#: network/network.pm:414
#, c-format
msgid "Proxy should be http://..."
msgstr "Прокси должен быть http://..."

#: network/network.pm:415
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URL должен начинаться с 'ftp:' или 'http:'"

#: network/shorewall.pm:55
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""
"Пожалуйста, введите имя интерфейса, подключенного к Интернету.\n"
"\n"
"Примеры:\n"
"\t\tppp+ для модемных или DSL-подключений, \n"
"\t\teth0 или eth1 для кабельного подключения, \n"
"\t\tippp+ для ISDN-подключения.\n"

#: network/thirdparty.pm:231
#, c-format
msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
msgstr "Скопируйте Alcatel microcode как mgmt.o в /usr/share/speedtouch/"

#: network/thirdparty.pm:240
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""
"Модем ECI Hi-Focus не поддерживается из-за проблем распространения "
"бинарников драйвера. .\n"
"\n"
"Возьмите драйвер на http://eciadsl.flashtux.org/"

#: network/thirdparty.pm:319
#, c-format
msgid "Could not install the packages (%s)!"
msgstr "Невозможно установить пакеты (%s )!"

#: network/thirdparty.pm:327
#, c-format
msgid "Some packages (%s) are required but aren't available."
msgstr "Некоторые пакеты (%s) необходимы, но недоступны."

#: network/thirdparty.pm:328
#, c-format
msgid ""
"These packages can be found in Mandriva Club or in Mandriva commercial "
"releases."
msgstr ""
"Данные пакеты можно найти в Mandriva Club или коммерческих релизах Mandriva."

#: network/thirdparty.pm:330
#, c-format
msgid ""
"The required files can also be installed from this URL:\n"
"%s"
msgstr ""
"Требуемые файлы также можно установить с этого URL:\n"
"%s"

#: network/thirdparty.pm:370
#, c-format
msgid "Unable to find \"%s\" on your Windows system!"
msgstr "Не могу найти \"%s\" в вашей системе Windows!"

#: network/thirdparty.pm:372
#, c-format
msgid "No Windows system has been detected!"
msgstr "Не обнаружено ни одной системы Windows!"

#: network/thirdparty.pm:382
#, c-format
msgid "Insert floppy"
msgstr "Вставьте дискету"

#: network/thirdparty.pm:383
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Вставьте отформатированную под FAT дискету в дисковод %s с %s в корневом "
"каталоге и нажмите %s"

#: network/thirdparty.pm:393
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Ошибка доступа к дискете, невозможно примонтировать устройство %s"

#: network/thirdparty.pm:403
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""
"Вам нужна микропрограмма Alcatel.\n"
"Вы можете загрузить ее с дискеты или своего раздела,\n"
"Windows или пропустить и сделать это позже."

#: network/thirdparty.pm:407 network/thirdparty.pm:409
#, c-format
msgid "Use a floppy"
msgstr "Использовать дискету"

#: network/thirdparty.pm:407
#, c-format
msgid "Use my Windows partition"
msgstr "Использовать мой раздел Windows"

#: network/thirdparty.pm:417
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr "Копирование Firmware завершилось неудачей, файл %s не найден"

#: network/thirdparty.pm:422 standalone/drakautoinst:250
#: standalone/drakvpn:888 standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "Поздравляем!"

#: network/thirdparty.pm:422
#, c-format
msgid "Firmware copy succeeded"
msgstr "Копирование Firmware успешно завершено"

#: network/thirdparty.pm:490
#, c-format
msgid "Looking for required software and drivers..."
msgstr "Поиск требуемого программного обеспечения и драйверов..."

#: network/thirdparty.pm:495
#, c-format
msgid "Please wait, running device configuration commands..."
msgstr "Подождите, пожалуйста, запускаются команды настройки устройств..."

#: network/wireless.pm:8
#, c-format
msgid "Open WEP"
msgstr "Открытый WEP"

#: network/wireless.pm:9
#, c-format
msgid "Restricted WEP"
msgstr "Закрытый WEP"

#: network/wireless.pm:10
#, c-format
msgid "WPA Pre-Shared Key"
msgstr "WPA Pre-Shared Ключ"

#: partition_table.pm:391
#, c-format
msgid "mount failed: "
msgstr "монтирование не удалось: "

#: partition_table.pm:496
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "Раздел Extended не поддерживается на этой платформе"

#: partition_table.pm:514
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"У вас есть дыра в вашей таблице разделов, но я не могу ее использовать.\n"
"Единственное решение - переместить первичные разделы так, чтобы дыра "
"располагалась сразу за расширенными разделами."

#: partition_table.pm:605
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Восстановление из файла %s завершилось неудачей: %s"

#: partition_table.pm:607
#, c-format
msgid "Bad backup file"
msgstr "Плохой резервный файл"

#: partition_table.pm:627
#, c-format
msgid "Error writing to file %s"
msgstr "Ошибка записи в файл %s"

#: partition_table/raw.pm:253
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Что-то плохое происходит на вашем диске. \n"
"Тест на проверку целостности данных завершился неудачей. \n"
"Это означает, что запись чего-нибудь на диск закончится случайным мусором"

#: pkgs.pm:21
#, c-format
msgid "must have"
msgstr "должно присутствовать"

#: pkgs.pm:22
#, c-format
msgid "important"
msgstr "важно"

#: pkgs.pm:23
#, c-format
msgid "very nice"
msgstr "весьма желательно"

#: pkgs.pm:24
#, c-format
msgid "nice"
msgstr "желательно"

#: pkgs.pm:25
#, c-format
msgid "maybe"
msgstr "может быть"

#: pkgs.pm:473
#, c-format
msgid "Downloading file %s..."
msgstr "Загрузка файла %s..."

#: printer/cups.pm:105
#, c-format
msgid "(on %s)"
msgstr "(на %s)"

#: printer/cups.pm:105
#, c-format
msgid "(on this machine)"
msgstr "(на этой машине)"

#: printer/cups.pm:117 standalone/printerdrake:200
#, c-format
msgid "Configured on other machines"
msgstr "Настроено на других машинах"

#: printer/cups.pm:119
#, c-format
msgid "On CUPS server \"%s\""
msgstr "на сервере CUPS \"%s\""

#: printer/cups.pm:119 printer/printerdrake.pm:4887
#: printer/printerdrake.pm:4897 printer/printerdrake.pm:5056
#: printer/printerdrake.pm:5067 printer/printerdrake.pm:5281
#, c-format
msgid " (Default)"
msgstr " (По умолчанию)"

#: printer/data.pm:67
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Печатать, не ставить в очередь"

#: printer/data.pm:68
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:80
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Демон построчно печатающего принтера"

#: printer/data.pm:81
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:102
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR нового поколения"

#: printer/data.pm:103
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:128
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Общая система печати Unix"

#: printer/data.pm:158
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - Общая система печати Unix (удаленный сервер)"

#: printer/data.pm:159
#, c-format
msgid "Remote CUPS"
msgstr "Удаленный CUPS"

#: printer/detect.pm:168 printer/detect.pm:263 printer/detect.pm:498
#: printer/detect.pm:571 printer/main.pm:330 printer/main.pm:690
#: printer/main.pm:1808 printer/printerdrake.pm:960
#: printer/printerdrake.pm:1120 printer/printerdrake.pm:2447
#: printer/printerdrake.pm:3981
#, c-format
msgid "Unknown model"
msgstr "Неизвестная модель"

#: printer/main.pm:24
#, c-format
msgid "Local printer"
msgstr "Локальный принтер"

#: printer/main.pm:25
#, c-format
msgid "Remote printer"
msgstr "Удаленный принтер"

#: printer/main.pm:26
#, c-format
msgid "Printer on remote CUPS server"
msgstr "Принтер на удаленном сервере CUPS"

#: printer/main.pm:27 printer/printerdrake.pm:1360
#: printer/printerdrake.pm:1899
#, c-format
msgid "Printer on remote lpd server"
msgstr "Принтер на удаленном сервере lpd"

#: printer/main.pm:28
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "Сетевой принтер (TCP/Socket)"

#: printer/main.pm:29
#, c-format
msgid "Printer on SMB/Windows server"
msgstr "Принтер на сервере SMB/Windows"

#: printer/main.pm:30
#, c-format
msgid "Printer on NetWare server"
msgstr "Принтер на сервере NetWare"

#: printer/main.pm:31 printer/printerdrake.pm:1903
#, c-format
msgid "Enter a printer device URI"
msgstr "Введите URI устройства печати"

#: printer/main.pm:32
#, c-format
msgid "Pipe job into a command"
msgstr "Передавать задание через конвейер в команду"

#: printer/main.pm:43
#, c-format
msgid "recommended"
msgstr "рекомендуется"

#: printer/main.pm:355 standalone/printerdrake:199
#, c-format
msgid "Configured on this machine"
msgstr "Настроено на этой машине"

#: printer/main.pm:361 printer/printerdrake.pm:1445
#, c-format
msgid " on parallel port #%s"
msgstr " на параллельном порту #%s"

#: printer/main.pm:364 printer/printerdrake.pm:1448
#, c-format
msgid ", USB printer #%s"
msgstr ", принтер USB #%s"

#: printer/main.pm:366
#, c-format
msgid ", USB printer"
msgstr ", принтер USB"

#: printer/main.pm:370
#, c-format
msgid ", HP printer on a parallel port"
msgstr ", HP принтер на параллельном порту"

#: printer/main.pm:372
#, c-format
msgid ", HP printer on USB"
msgstr ", HP принтер на USB"

#: printer/main.pm:374
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr ", HP принтер на HP JetDirect"

#: printer/main.pm:376
#, c-format
msgid ", HP printer"
msgstr ", HP принтер"

#: printer/main.pm:382
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr ", многофункциональное устройство на параллельном порту #%s"

#: printer/main.pm:385
#, c-format
msgid ", multi-function device on a parallel port"
msgstr ", многофункциональное устройство на параллельном порту"

#: printer/main.pm:387
#, c-format
msgid ", multi-function device on USB"
msgstr ", многофункциональное устройство на USB"

#: printer/main.pm:389
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr ", многофункциональное устройство на HP JetDirect"

#: printer/main.pm:391
#, c-format
msgid ", multi-function device"
msgstr ", многофункциональное устройство"

#: printer/main.pm:395
#, c-format
msgid ", printing to %s"
msgstr ", печатающий %s"

#: printer/main.pm:398
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " на сервере LPD \"%s\", принтер \"%s\""

#: printer/main.pm:401
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr ", хост TCP/IP \"%s\", порт %s "

#: printer/main.pm:406
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr " на сервере SMB/Windows \"%s\", ресурс \"%s\""

#: printer/main.pm:411
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr " на сервере Novell \"%s\", принтер \"%s\""

#: printer/main.pm:414
#, c-format
msgid ", using command %s"
msgstr ", используя команду %s"

#: printer/main.pm:429
#, c-format
msgid "Parallel port #%s"
msgstr "Параллельный порт #%s"

#: printer/main.pm:432 printer/printerdrake.pm:1466
#: printer/printerdrake.pm:1493 printer/printerdrake.pm:1508
#, c-format
msgid "USB printer #%s"
msgstr "Принтер USB #%s"

#: printer/main.pm:434
#, c-format
msgid "USB printer"
msgstr "USB принтер"

#: printer/main.pm:438
#, c-format
msgid "HP printer on a parallel port"
msgstr "HP принтер на параллельном порту"

#: printer/main.pm:440
#, c-format
msgid "HP printer on USB"
msgstr "HP принтер на USB"

#: printer/main.pm:442
#, c-format
msgid "HP printer on HP JetDirect"
msgstr "HP принтер на HP JetDirect"

#: printer/main.pm:444
#, c-format
msgid "HP printer"
msgstr "HP принтер"

#: printer/main.pm:450
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "Многофункциональное устройство на параллельном порту #%s"

#: printer/main.pm:453
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "Многофункциональное устройство на параллельном порту"

#: printer/main.pm:455
#, c-format
msgid "Multi-function device on USB"
msgstr "Многофункциональное устройство на USB"

#: printer/main.pm:457
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "Многофункциональное устройство на HP JetDirect"

#: printer/main.pm:459
#, c-format
msgid "Multi-function device"
msgstr "Многофункциональное устройство"

#: printer/main.pm:463
#, c-format
msgid "Prints into %s"
msgstr "Печатает в %s"

#: printer/main.pm:466
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "LPD сервер \"%s\", принтер \"%s\""

#: printer/main.pm:469
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "TCP/IP хост \"%s\", порт %s "

#: printer/main.pm:474
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "SMB/Windows сервер \"%s\", ресурс \"%s\""

#: printer/main.pm:479
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "Novell сервер \"%s\", принтер \"%s\""

#: printer/main.pm:482
#, c-format
msgid "Uses command %s"
msgstr "Использует команду %s"

#: printer/main.pm:484
#, c-format
msgid "URI: %s"
msgstr "URI: %s"

#: printer/main.pm:687 printer/printerdrake.pm:1047
#: printer/printerdrake.pm:3119
#, c-format
msgid "Raw printer (No driver)"
msgstr "Принтер печати необработанных данных (без драйвера)"

#: printer/main.pm:1307 printer/printerdrake.pm:211
#: printer/printerdrake.pm:223
#, c-format
msgid "Local network(s)"
msgstr "Локальная сеть"

#: printer/main.pm:1309 printer/printerdrake.pm:227
#, c-format
msgid "Interface \"%s\""
msgstr "Интерфейс \"%s\""

#: printer/main.pm:1311
#, c-format
msgid "Network %s"
msgstr "Сеть %s"

#: printer/main.pm:1313
#, c-format
msgid "Host %s"
msgstr "Хост %s"

#: printer/main.pm:1342
#, c-format
msgid "%s (Port %s)"
msgstr "%s (Порт %s)"

#: printer/printerdrake.pm:24
#, c-format
msgid ""
"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
"on. Download the Windows driver package from the HP web site (the firmware "
"on the printer's CD does not work) and extract the firmware file from it by "
"decompressing the self-extracting '.exe' file with the 'unzip' utility and "
"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
"printer' directory. There it will be found by the automatic uploader script "
"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
"Для HP LaserJet 1000 после включения необходимо загрузить в память его "
"firmware. Скачайте пакет драйверов для Windows с веб-сайта HP (firmware с "
"компакт-диска принтера не работает) и извлеките из него файл  firmware, "
"открыв самораспаковывающийся архив '.exe' утилитой 'unzip'. Найдите файл "
"'sihp1000.img' и скопируйте его в каталог '/etc/printer'. Там он будет "
"найден скриптом автоматической загрузчики и загружен в память, когда бы ни "
"был подсоединен и включен принтер.\n"

#: printer/printerdrake.pm:67
#, c-format
msgid "CUPS printer configuration"
msgstr "Настройка принтера CUPS"

#: printer/printerdrake.pm:68
#, c-format
msgid ""
"Here you can choose whether the printers connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Здесь вы также можете решить, должны ли принтеры, подключенные к этой "
"машине, быть доступны для удаленных машин и для которой из них."

#: printer/printerdrake.pm:69
#, c-format
msgid ""
"You can also decide here whether printers on remote machines should be "
"automatically made available on this machine."
msgstr ""
"Здесь вы также можете решить, должны ли принтеры на удаленных машинах быть "
"автоматически доступны на этой машине."

#: printer/printerdrake.pm:72
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "Принтеры на этой машине доступны для других компьютеров"

#: printer/printerdrake.pm:77
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "Автоматически искать доступные принтеры на удаленных машинах"

#: printer/printerdrake.pm:82
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "Общий доступ к принтеру с хостов/сетей:"

#: printer/printerdrake.pm:84
#, c-format
msgid "Custom configuration"
msgstr "Выборочная настройка"

#: printer/printerdrake.pm:89 standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, c-format
msgid "No remote machines"
msgstr "Удаленные машины отсутствуют"

#: printer/printerdrake.pm:100
#, c-format
msgid "Additional CUPS servers: "
msgstr "Дополнительные сервера CUPS"

#: printer/printerdrake.pm:107
#, c-format
msgid ""
"To get access to printers on remote CUPS servers in your local network you "
"only need to turn on the \"Automatically find available printers on remote "
"machines\" option; the CUPS servers inform your machine automatically about "
"their printers. All printers currently known to your machine are listed in "
"the \"Remote printers\" section in the main window of Printerdrake. If your "
"CUPS server(s) is/are not in your local network, you have to enter the IP "
"address(es) and optionally the port number(s) here to get the printer "
"information from the server(s)."
msgstr ""
"Чтобы получить доступ к принтерам на удаленных серверах CUPS в вашей "
"локальной сети, вам нужно только включить опцию \"Автоматически искать "
"доступные принтеры на удаленных машинах\"; серверы CUPS автоматически "
"сообщат вашей машине о своих принтерах. Все принтеры, известные на данный "
"момент вашей машине, перечислены в разделе \"Удаленные принтеры\" в главном "
"окне Printerdrake. Когда сервер CUPS находится не в вашей локальной сети, вы "
"должны ввести IP-адрес и, возможно, номер порта, чтобы получить с сервера "
"информацию о принтере."

#: printer/printerdrake.pm:115
#, c-format
msgid "Japanese text printing mode"
msgstr "Режим печати японского текста"

#: printer/printerdrake.pm:116
#, c-format
msgid ""
"Turning on this allows to print plain text files in Japanese language. Only "
"use this function if you really want to print text in Japanese, if it is "
"activated you cannot print accentuated characters in latin fonts any more "
"and you will not be able to adjust the margins, the character size, etc. "
"This setting only affects printers defined on this machine. If you want to "
"print Japanese text on a printer set up on a remote machine, you have to "
"activate this function on that remote machine."
msgstr ""
"Эта опция позволяет печатать простой текст на японском языке. Используйте ее "
"только, если действительно хотите печатать японский текст. Если опция "
"включена, вы больше не сможете печатать символы со знаками ударения в "
"латинских шрифтах, а также настроить поля, размер шрифта и т.д. Этот "
"параметр применим только к принтерам, определенным на этой машине. Если вы "
"хотите печатать японский текст на принтере, установленном на удаленной "
"машине, вы должны включить эту опцию на той удаленной машине."

#: printer/printerdrake.pm:123
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "Автоматическая корректировка настройки CUPS"

#: printer/printerdrake.pm:125
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically "
"made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" "
"as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, "
"but then you have to take care of these points."
msgstr ""
"Когда эта опция включена, при каждой загрузке CUPS он автоматически "
"проверяет, что\n"
"- если установлен LPD/LPRng, то /etc/printcap не будет перезаписан CUPS\n"
"\n"
"- если отсутствует /etc/cups/cupsd.conf, он будет создан\n"
"\n"
"- когда информация о принтере сообщается по сети, она не содержит \"localhost"
"\" в качестве имени сервера.\n"
"\n"
"Если некоторые из этих проверок создали вам проблему, отключите эту опцию, "
"но тогда вы должны сами позаботиться об этих пунктах."

#: printer/printerdrake.pm:138 printer/printerdrake.pm:506
#: printer/printerdrake.pm:4520
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr "Удаленный сервер CUPS и не локальный демон CUPS"

#: printer/printerdrake.pm:141
#, c-format
msgid "On"
msgstr "На"

#: printer/printerdrake.pm:143 printer/printerdrake.pm:498
#: printer/printerdrake.pm:525
#, c-format
msgid "Off"
msgstr "Выключить"

#: printer/printerdrake.pm:144 printer/printerdrake.pm:507
#, c-format
msgid ""
"In this mode the local CUPS daemon will be stopped and all printing requests "
"go directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""
"В этом режиме локальный демон CUPS будет остановлен и все запросы на печать "
"будут отправляться прямо на указанный ниже сервер. Обратите внимание, что в "
"этом случае невозможно определить локальные запросы на печать и если "
"указанный сервер не работает, то с этой машины вывод на печать не будет "
"производиться вообще."

#: printer/printerdrake.pm:161 printer/printerdrake.pm:236
#, c-format
msgid "Sharing of local printers"
msgstr "Общий доступ к локальным принтерам"

#: printer/printerdrake.pm:162
#, c-format
msgid ""
"These are the machines and networks on which the locally connected printer"
"(s) should be available:"
msgstr ""
"Это машины и сети, в которых локально подключенные принтеры должны быть "
"доступны:"

#: printer/printerdrake.pm:173
#, c-format
msgid "Add host/network"
msgstr "Добавить хост/сеть"

#: printer/printerdrake.pm:179
#, c-format
msgid "Edit selected host/network"
msgstr "Изменить выбранный хост/сеть"

#: printer/printerdrake.pm:188
#, c-format
msgid "Remove selected host/network"
msgstr "Удалить выбранный хост/сеть"

#: printer/printerdrake.pm:219 printer/printerdrake.pm:229
#: printer/printerdrake.pm:241 printer/printerdrake.pm:248
#: printer/printerdrake.pm:279 printer/printerdrake.pm:297
#, c-format
msgid "IP address of host/network:"
msgstr "IP-адрес хоста/сети:"

#: printer/printerdrake.pm:237
#, c-format
msgid ""
"Choose the network or host on which the local printers should be made "
"available:"
msgstr ""
"Выберите сеть или хост, у которых локальные принтеры должны быть сделаны "
"доступными:"

#: printer/printerdrake.pm:244
#, c-format
msgid "Host/network IP address missing."
msgstr "Отсутствует IP адрес хоста/сети."

#: printer/printerdrake.pm:252
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "Введен неправильный IP хоста/сети.\n"

#: printer/printerdrake.pm:253 printer/printerdrake.pm:429
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "Примеры правильных IP:\n"

#: printer/printerdrake.pm:277
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "Этот хост/сеть уже есть в списке, он не может быть добавлен еще раз.\n"

#: printer/printerdrake.pm:346 printer/printerdrake.pm:416
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "Получение доступа к принтерам на удаленных серверах CUPS"

#: printer/printerdrake.pm:347
#, c-format
msgid ""
"Add here the CUPS servers whose printers you want to use. You only need to "
"do this if the servers do not broadcast their printer information into the "
"local network."
msgstr ""
"Добавьте здесь сервера CUPS, чьи принтера вы хотите использовать. Вам "
"прийдется это делать только если сервера не передают информацию о своих "
"принтерах в локальную сеть."

#: printer/printerdrake.pm:358
#, c-format
msgid "Add server"
msgstr "Добавить сервер"

#: printer/printerdrake.pm:364
#, c-format
msgid "Edit selected server"
msgstr "Редактировать выбранный сервер"

#: printer/printerdrake.pm:373
#, c-format
msgid "Remove selected server"
msgstr "Удалить выбранный сервер"

#: printer/printerdrake.pm:417
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
"Введите IP адрес и порт хоста, принтеры которого вы хотите использовать."

#: printer/printerdrake.pm:418
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "Если порт не указан, по умолчанию будет использован 631."

#: printer/printerdrake.pm:422
#, c-format
msgid "Server IP missing!"
msgstr "Отсутствует IP сервера!"

#: printer/printerdrake.pm:428
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "Введен неправильный IP.\n"

#: printer/printerdrake.pm:440 printer/printerdrake.pm:2133
#, c-format
msgid "The port number should be an integer!"
msgstr "Номер порта должен быть целым числом!"

#: printer/printerdrake.pm:451
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "Этот сервер уже есть в списке, он не может быть добавлен снова.\n"

#: printer/printerdrake.pm:462 printer/printerdrake.pm:2160
#: standalone/drakups:251 standalone/harddrake2:52
#, c-format
msgid "Port"
msgstr "Порт"

#: printer/printerdrake.pm:495 printer/printerdrake.pm:511
#: printer/printerdrake.pm:526 printer/printerdrake.pm:530
#: printer/printerdrake.pm:536
#, c-format
msgid "On, Name or IP of remote server:"
msgstr "Включить, имя или IP удаленного сервера"

#: printer/printerdrake.pm:514 printer/printerdrake.pm:4529
#: printer/printerdrake.pm:4595
#, c-format
msgid "CUPS server name or IP address missing."
msgstr "Отсутствует IP адрес или имя сервера CUPS."

#: printer/printerdrake.pm:566 printer/printerdrake.pm:586
#: printer/printerdrake.pm:811 printer/printerdrake.pm:880
#: printer/printerdrake.pm:901 printer/printerdrake.pm:927
#: printer/printerdrake.pm:1023 printer/printerdrake.pm:1065
#: printer/printerdrake.pm:1075 printer/printerdrake.pm:1110
#: printer/printerdrake.pm:2220 printer/printerdrake.pm:2489
#: printer/printerdrake.pm:2523 printer/printerdrake.pm:2598
#: printer/printerdrake.pm:2640 printer/printerdrake.pm:2677
#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2961
#: printer/printerdrake.pm:2966 printer/printerdrake.pm:3114
#: printer/printerdrake.pm:3225 printer/printerdrake.pm:3839
#: printer/printerdrake.pm:3906 printer/printerdrake.pm:3955
#: printer/printerdrake.pm:3958 printer/printerdrake.pm:4068
#: printer/printerdrake.pm:4126 printer/printerdrake.pm:4198
#: printer/printerdrake.pm:4219 printer/printerdrake.pm:4229
#: printer/printerdrake.pm:4320 printer/printerdrake.pm:4415
#: printer/printerdrake.pm:4421 printer/printerdrake.pm:4449
#: printer/printerdrake.pm:4556 printer/printerdrake.pm:4665
#: printer/printerdrake.pm:4685 printer/printerdrake.pm:4694
#: printer/printerdrake.pm:4709 printer/printerdrake.pm:4910
#: printer/printerdrake.pm:5385 printer/printerdrake.pm:5468
#: standalone/printerdrake:75 standalone/printerdrake:590
#, c-format
msgid "Printerdrake"
msgstr "Printerdrake"

#: printer/printerdrake.pm:567 printer/printerdrake.pm:4127
#: printer/printerdrake.pm:4666
#, c-format
msgid "Reading printer data..."
msgstr "Читается база данных принтеров..."

#: printer/printerdrake.pm:587
#, c-format
msgid "Restarting CUPS..."
msgstr "Перезапускается CUPS..."

#: printer/printerdrake.pm:614
#, c-format
msgid ""
"Allow pop-up windows, printer setup and package installation may be canceled"
msgstr ""
"Разрешить всплывающие окна, настройка принтера и установка пакетов могут "
"быть отменены"

#: printer/printerdrake.pm:616
#, c-format
msgid ""
"No pop-up windows, printer setup and package installation cannot be canceled"
msgstr ""
"Запретить всплывающие окна, настройка принтера и установка пакетов не могут "
"быть отменены"

#: printer/printerdrake.pm:622
#, c-format
msgid "Printer auto administration"
msgstr "Автоматическое управление принтером"

#: printer/printerdrake.pm:623
#, c-format
msgid ""
"Here you can configure printer administration tasks which should be done "
"automatically."
msgstr ""
"Здесь вы можете настроить задачи управления принтером, которые будут "
"выполняться автоматически."

#: printer/printerdrake.pm:626
#, c-format
msgid "Do automatic configuration of new printers"
msgstr "Выполнить автоматическую настройку новых принтеров"

#: printer/printerdrake.pm:627 printer/printerdrake.pm:641
#, c-format
msgid "when a USB printer is connected and turned on"
msgstr "когда USB принтер подключен и на него подано питание"

#: printer/printerdrake.pm:630
#, c-format
msgid "when Printerdrake is started"
msgstr "когда запускается Printerdrake "

#: printer/printerdrake.pm:634
#, c-format
msgid "Mode for automatic printer setup:"
msgstr "Режим для автоматической настройки принтера:"

#: printer/printerdrake.pm:640
#, c-format
msgid "Re-enable disabled printers"
msgstr "Включить заново отключенные принтеры"

#: printer/printerdrake.pm:644
#, c-format
msgid "when the printing system is started"
msgstr "когда запускается система печати"

#: printer/printerdrake.pm:680
#, c-format
msgid "Communication error handling for the printer \"%s\""
msgstr "Обработка ошибки связи с принтером \"%s\""

#: printer/printerdrake.pm:682
#, c-format
msgid ""
"Here you can configure how errors during the communication between your "
"computer and the printer \"%s\" should be handled (for example if the "
"printer is not turned on)."
msgstr ""
"Здесь вы можете настроить как будут обрабатываться ошибки во время "
"установления соединения между компьютером и принтером \"%s\" (например, если "
"принтер не включен)."

#: printer/printerdrake.pm:686
#, c-format
msgid "The number of retries should be an integer number of at least 1!"
msgstr "Количество попыток должно быть целым числом, и как минимум 1!"

#: printer/printerdrake.pm:690
#, c-format
msgid "The delay between retries should be a positive integer number!"
msgstr "Пауза между попытками должна быть положительным целым числом!"

#: printer/printerdrake.pm:701
#, c-format
msgid "Do not disable the printer"
msgstr "Не отключать принтер"

#: printer/printerdrake.pm:704
#, c-format
msgid "Retry infinitely often"
msgstr "Повторять до бесконечности"

#: printer/printerdrake.pm:707
#, c-format
msgid "Number of retries"
msgstr "Количество попыток"

#: printer/printerdrake.pm:712
#, c-format
msgid "Delay between retries (in sec)"
msgstr "Пауза между попытками (в сек)"

#: printer/printerdrake.pm:745 printer/printerdrake.pm:765
#, c-format
msgid "Select Printer Connection"
msgstr "Выберите подключение к принтеру"

#: printer/printerdrake.pm:746
#, c-format
msgid "How is the printer connected?"
msgstr "Как подключен принтер?"

#: printer/printerdrake.pm:748
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these "
"printers will be automatically detected."
msgstr ""
"\n"
"Принтеры на удаленных серверах CUPS не должны здесь настраиваться;\n"
"эти принтеры будут определены автоматически."

#: printer/printerdrake.pm:751 printer/printerdrake.pm:4912
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be "
"detected nor tested!"
msgstr ""
"\n"
"ПРЕДУПРЕЖДЕНИЕ: Нет ни одного активного соединения с локальной сетью, "
"поэтому удаленные принтеры не могут быть ни найдены ни проверены!"

#: printer/printerdrake.pm:758
#, c-format
msgid ""
"Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr ""
"Автоопределение принтера (локальные, TCP/Socket, SMB-принтеры, и URI "
"устройства)"

#: printer/printerdrake.pm:760
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr "Изменить задержку для автоопределения сетевого принтера"

#: printer/printerdrake.pm:766
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr ""
"Введите значение задержки для автоопределения сетевого принтера (в мсек) "
"здесь."

#: printer/printerdrake.pm:768
#, c-format
msgid ""
"The longer you choose the timeout, the more reliable the detections of "
"network printers will be, but the scan can take longer then, especially if "
"there are many machines with local firewalls in the network. "
msgstr ""
"Чем длиннее вы укажете задержку, тем более верно будет определение сетевых "
"принтеров, однако сканирование будет продолжаться дольше, особенно если в "
"локальной сети много машин."

#: printer/printerdrake.pm:772
#, c-format
msgid "The timeout must be a positive integer number!"
msgstr "Задержка должна быть положительным целым числом!"

#: printer/printerdrake.pm:811
#, c-format
msgid "Checking your system..."
msgstr "Проверяется ваша система..."

#: printer/printerdrake.pm:829
#, c-format
msgid "and one unknown printer"
msgstr "и один неизвестный принтер"

#: printer/printerdrake.pm:831
#, c-format
msgid "and %d unknown printers"
msgstr "и %d неизвестных принтеров"

#: printer/printerdrake.pm:835
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Следующие принтеры\n"
"\n"
"%s%s\n"
"непосредственно подключены к вашей системе"

#: printer/printerdrake.pm:837
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"Следующий принтер\n"
"\n"
"%s%s\n"
"непосредственно подключены к вашей системе"

#: printer/printerdrake.pm:838
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"Следующий принтер\n"
"\n"
"%s%s\n"
"непосредственно подключен к вашей системе"

#: printer/printerdrake.pm:842
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"К вашей системе непосредственно подключен один неизвестный принтер"

#: printer/printerdrake.pm:843
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"К вашей системе непосредственно подключено %d неизвестных принтера"

#: printer/printerdrake.pm:846
#, c-format
msgid ""
"There are no printers found which are directly connected to your machine"
msgstr "Не найдены принтеры, непосредственно подключенные к вашей машине."

#: printer/printerdrake.pm:849
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (Убедитесь, что все ваши принтеры подключены и включены).\n"

#: printer/printerdrake.pm:862
#, c-format
msgid ""
"Do you want to enable printing on the printers mentioned above or on "
"printers in the local network?\n"
msgstr ""
"Хотите включить печать на принтерах, перечисленных выше или на принтерах в "
"локальной сети?\n"

#: printer/printerdrake.pm:863
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "Хотите включить печать на принтерах в локальной сети?\n"

#: printer/printerdrake.pm:865
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "Хотите включить печать на принтерах, упомянутых выше?\n"

#: printer/printerdrake.pm:866
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "Вы уверены, что хотите установить печать на этой машине?\n"

#: printer/printerdrake.pm:867
#, c-format
msgid ""
"NOTE: Depending on the printer model and the printing system up to %d MB of "
"additional software will be installed."
msgstr ""
"ПРИМЕЧАНИЕ: в зависимости от модели принтера и системы печати будет "
"установлено до %d MB дополнительного программного обеспечения."

#: printer/printerdrake.pm:884
#, c-format
msgid "Do not setup printer automatically now, and never do it again"
msgstr ""
"Не настраивать сейчас принтер автоматически и никогда больше не делать этого"

#: printer/printerdrake.pm:928
#, c-format
msgid "Searching for new printers..."
msgstr "Выполняется поиск новых принтеров..."

#: printer/printerdrake.pm:976
#, c-format
msgid "Do not setup printer automatically again"
msgstr "Не настраивать принтер автоматически"

#: printer/printerdrake.pm:983
#, c-format
msgid "New printers found"
msgstr "Найдены новые принтера"

#: printer/printerdrake.pm:984
#, c-format
msgid "New printer found"
msgstr "Найден новый принтер"

#: printer/printerdrake.pm:986
#, c-format
msgid ""
"The following new printers were found and Printerdrake can automatically set "
"them up for you. If you do not want to have all of them set up, unselect the "
"ones which should be skipped, or click \"Cancel\" to set up none of them.\n"
msgstr ""
"Найдены следующие новые принтеры и Printerdrake может автоматически "
"установить их для вас. Если вам они в настроенном виде не нужны, уберите "
"галочки с тех, которые нужно пропустить, или нажмите \"Отмена\" чтобы ни "
"один из них не настраивать.\n"

#: printer/printerdrake.pm:987
#, c-format
msgid ""
"The following new printer was found and printerdrake can automatically set "
"it up for you. If you do not want to have it set up, unselect it, or click "
"\"Cancel\".\n"
msgstr ""
"Найден следующий новый принтер и Printerdrake может автоматически установить "
"его для вас. Если вы не желаете его устанавливать, уберите с него галочку, "
"или нажмите \"Отмена\".\n"

#: printer/printerdrake.pm:988
#, c-format
msgid ""
"Note that for certain printer models additional packages need to be "
"installed. So keep your installation media handy.\n"
msgstr ""
"Обратите внимание, что к некоторым моделям принтеров требуется установка "
"дополнительных пакетов. Поэтому держите под рукой установочные носители.\n"

#: printer/printerdrake.pm:1024 printer/printerdrake.pm:1066
#, c-format
msgid "Configuring printer on %s..."
msgstr "Настраивается принтер на %s..."

#: printer/printerdrake.pm:1049
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:1050
#, c-format
msgid " on "
msgstr " на "

#: printer/printerdrake.pm:1051 standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:1056 printer/printerdrake.pm:3126
#, c-format
msgid "Printer model selection"
msgstr "Выбор модели принтера"

#: printer/printerdrake.pm:1057 printer/printerdrake.pm:3127
#, c-format
msgid "Which printer model do you have?"
msgstr "Какая у вас модель принтера?"

#: printer/printerdrake.pm:1058
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please "
"choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake не может определить модель вашего принтера %s. Пожалуйста, "
"выберите правильную модель из списка."

#: printer/printerdrake.pm:1061 printer/printerdrake.pm:3132
#, c-format
msgid ""
"If your printer is not listed, choose a compatible (see printer manual) or a "
"similar one."
msgstr ""
"Если ваш принтер отсутствует в списке, выберите совместимый (смотрите "
"описание принтера) или похожий."

#: printer/printerdrake.pm:1076 printer/printerdrake.pm:4686
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "Настраивается принтер \"%s\"..."

#: printer/printerdrake.pm:1111
#, c-format
msgid ""
"Now you have turned off automatic printer setup.\n"
"\n"
msgstr ""
"В данный момент вы отключили автоматическую установку принтеров.\n"
"\n"

#: printer/printerdrake.pm:1112
#, c-format
msgid ""
"You can turn it back on again by choosing \"%s\" -> \"%s\" in Printerdrake's "
"main menu. "
msgstr ""
"Вы можете включить ее заново выбрав \"%s\" -> \"%s\" в главном меню "
"Printerdrake. "

#: printer/printerdrake.pm:1112 printer/printerdrake.pm:4962
#, c-format
msgid "Configure Auto Administration"
msgstr "Настройка автоматического управления"

#: printer/printerdrake.pm:1113
#, c-format
msgid ""
"There you can also choose in which situation automatic printer setup is done "
"(On Printerdrake startup, on printing system startup, when connecting a new "
"USB printer)."
msgstr ""
"Вы можете также выбрать в какой ситуации автоматическая настройка принтеров "
"завершается.(При запуске Printerdrake, при запуске системы печати, при "
"подсоединении нового USB принтера)."

#: printer/printerdrake.pm:1261 printer/printerdrake.pm:1273
#: printer/printerdrake.pm:1380 printer/printerdrake.pm:2401
#: printer/printerdrake.pm:2459 printer/printerdrake.pm:2543
#: printer/printerdrake.pm:4929 printer/printerdrake.pm:5116
#, c-format
msgid "Add a new printer"
msgstr "Добавить новый принтер"

#: printer/printerdrake.pm:1262
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from "
"this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives "
"you access to all available printer drivers, driver options, and printer "
"connection types."
msgstr ""
"\n"
"Добро пожаловать в Мастер установки принтера\n"
"\n"
"Этот мастер позволит вам установит локальные или сетевые принтеры, "
"используемые на этой машине, а также другими машинами в сети.\n"
"\n"
"Он спросит у вас всю необходимую для установки принтера информацию и "
"обеспечит вам доступ ко всем доступным драйверам принтера, параметрам "
"драйвера и типам подключения принтера."

#: printer/printerdrake.pm:1275
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected. Also your network printer(s) and your Windows "
"machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network and/or Windows-hosted printers when you do not "
"need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Добро пожаловать в Мастер установки принтера\n"
"\n"
"Этот мастер поможет вам установить принтеры, подключенные к этому "
"компьютеру, подключенные непосредственно к сети или к удаленным машинам "
"Windows.\n"
"\n"
"Если у вас есть принтеры, подключенные к этой машине, пожалуйста, подключите "
"их кабелем к этому компьютеру и включите питание, чтобы они могли быть "
"определены автоматически. Ваши сетевые принтеры и принтеры на Windows-"
"машинах также должны быть подключены и включены.\n"
"\n"
"Помните, что автоматическое определение сетевых принтеров выполняется "
"значительно дольше, чем автоматическое определение принтеров, подключенных "
"только к этой машине. Поэтому отключите автоопределение сетевых и/или "
"принтеров на Windows-машинах, пока они вам не нужны.\n"
"\n"
"Нажмите \"Далее\", когда будете готовы, и \"Отмена\", если вы не хотите\n"
"устанавливать принтер сейчас."

#: printer/printerdrake.pm:1284
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/"
"they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Добро пожаловать в Мастер установки принтера\n"
"\n"
"Этот мастер поможет вам установить ваш принтер, подключенный к этому "
"компьютеру.\n"
"\n"
"Пожалуйста подключите все нужные принтеры кабелем к этому компьютеру\n"
"и включите им питание, чтобы они могли быть определены автоматически.\n"
"\n"
"Нажмите \"Далее\", когда будете готовы, и \"Отмена\", если вы не хотите\n"
"устанавливать принтер сейчас."

#: printer/printerdrake.pm:1292
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected. Also "
"your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-"
"detection of only the printers connected to this machine. So turn off the "
"auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Добро пожаловать в Мастер установки принтера\n"
"\n"
"Этот мастер поможет вам установить ваш принтер(ы), подключенный к этому "
"компьютеру или подключенный непосредственно в сеть.\n"
"\n"
"Если у вас есть принтер(ы), подключенный к этой машине, пожалуйста, "
"подключите его/их кабель в этот компьютер и включите его/их, чтобы он/они "
"мог быть определен автоматически. Ваш сетевой принтер(ы) также должен быть "
"подключен и включен.\n"
"\n"
"Помните, что автоматическое определение сетевых принтеров выполняется "
"значительно дольше, чем автоматическое определение принтеров, подключенных "
"только к этой машине. Поэтому отключите автоопределение сетевых принтеров, "
"пока они вам не нужны.\n"
"\n"
"Нажмите \"Далее\", когда будете готовы, и \"Отмена\", если вы не хотите "
"устанавливать свой принтер(ы) сейчас."

#: printer/printerdrake.pm:1301
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this "
"computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on "
"this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
"to set up your printer(s) now."
msgstr ""
"\n"
"Добро пожаловать в Мастер установки принтера\n"
"\n"
"Этот мастер поможет вам установить ваш принтер(ы), подключенный к этому "
"компьютеру.\n"
"\n"
"Если у вас есть принтер(ы), подключенный к этой машине, пожалуйста, "
"подключите его/их кабель в этот компьютер и включите его/их, чтобы он/они "
"могли быть определены автоматически.\n"
"\n"
"Нажмите \"Далее\", когда будете готовы, и \"Отмена\", если вы не хотите\n"
"устанавливать свой принтер(ы) сейчас."

#: printer/printerdrake.pm:1352
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "Автоматически определить принтеры, подключенные к этой машине"

#: printer/printerdrake.pm:1355
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr ""
"Автоматически определить принтеры, подключенные непосредственно к локальной "
"сети"

#: printer/printerdrake.pm:1358
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr ""
"Автоматически определить принтеры, подключенные к машинам с работающей "
"Microsoft Windows"

#: printer/printerdrake.pm:1361
#, c-format
msgid "No auto-detection"
msgstr "Без авто-определения"

#: printer/printerdrake.pm:1381
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in "
"the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change "
"the default option settings (paper input tray, printout quality, ...), "
"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
"\n"
"Поздравляем, теперь ваш принтер установлен и настроен!\n"
"\n"
"Вы можете печатать, используя команду \"Печать\" своего приложения (обычно в "
"меню \"Файл\").\n"
"\n"
"Если вы захотите добавить, удалить или переименовать принтер или, если вы "
"захотите изменить параметры настройки по умолчанию (загрузочный лоток для "
"бумаги, качество вывода данных на печать, ...), выберите \"Принтер\" в "
"разделе \"Оборудование\" Центра управления %s ."

#: printer/printerdrake.pm:1417 printer/printerdrake.pm:1641
#: printer/printerdrake.pm:1704 printer/printerdrake.pm:1796
#: printer/printerdrake.pm:1934 printer/printerdrake.pm:2010
#: printer/printerdrake.pm:2177 printer/printerdrake.pm:2268
#: printer/printerdrake.pm:2277 printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2297 printer/printerdrake.pm:2495
#: printer/printerdrake.pm:2610
#, c-format
msgid "Could not install the %s packages!"
msgstr "Невозможно установить пакеты %s !"

#: printer/printerdrake.pm:1419
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr "Пропускается автоопределение сервера Windows/SMB "

#: printer/printerdrake.pm:1425 printer/printerdrake.pm:1564
#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Printer auto-detection"
msgstr "Автоопределение принтера"

#: printer/printerdrake.pm:1425
#, c-format
msgid "Detecting devices..."
msgstr "Определяются устройства..."

#: printer/printerdrake.pm:1451
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", сетевой принтер \"%s\", порт %s"

#: printer/printerdrake.pm:1454
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", принтер \"%s\" на сервере SMB/Windows \"%s\""

#: printer/printerdrake.pm:1458
#, c-format
msgid "Detected %s"
msgstr "Обнаружен %s"

#: printer/printerdrake.pm:1463 printer/printerdrake.pm:1490
#: printer/printerdrake.pm:1505
#, c-format
msgid "Printer on parallel port #%s"
msgstr "Принтер на параллельном порту #%s"

#: printer/printerdrake.pm:1469
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "Сетевой принтер \"%s\", порт %s"

#: printer/printerdrake.pm:1472
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "Принтер \"%s\" на сервере SMB/Windows \"%s\""

#: printer/printerdrake.pm:1550
#, c-format
msgid "Local Printer"
msgstr "Локальный принтер"

#: printer/printerdrake.pm:1551
#, c-format
msgid ""
"No local printer found! To manually install a printer enter a device name/"
"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
"printer: /dev/usb/lp1, ...)."
msgstr ""
"Локальный принтер не найден! Чтобы установить принтер вручную, введите "
"название устройства/имя файла в строке ввода данных (параллельные порты: /"
"dev/lpt0, dev/lpt1, ..., соответствуют LPT1:, LPT2:, ..., 1-й принтер USB: /"
"dev/usb/lp0, 2-й принтер USB: /dev/usb/lp1, ...)."

#: printer/printerdrake.pm:1555
#, c-format
msgid "You must enter a device or file name!"
msgstr "Вы должны ввести устройство или имя файла! "

#: printer/printerdrake.pm:1565
#, c-format
msgid "No printer found!"
msgstr "Принтер не найден!"

#: printer/printerdrake.pm:1573
#, c-format
msgid "Local Printers"
msgstr "Локальные принтеры"

#: printer/printerdrake.pm:1574
#, c-format
msgid "Available printers"
msgstr "Доступные принтеры"

#: printer/printerdrake.pm:1578 printer/printerdrake.pm:1587
#, c-format
msgid "The following printer was auto-detected. "
msgstr "Автоматически были определены следующие принтеры. "

#: printer/printerdrake.pm:1580
#, c-format
msgid ""
"If it is not the one you want to configure, enter a device name/file name in "
"the input line"
msgstr ""
"Если это не тот принтер, который вы хотите настроить, введите название "
"устройства/имя файла в строке ввода данных"

#: printer/printerdrake.pm:1581
#, c-format
msgid ""
"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
"В качестве альтернативы вы можете ввести название устройства/имя файла в "
"строке ввода данных"

#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1591
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "Здесь перечислены все автоматически определенные принтеры."

#: printer/printerdrake.pm:1584
#, c-format
msgid ""
"Please choose the printer you want to set up or enter a device name/file "
"name in the input line"
msgstr ""
"Пожалуйста, выберите принтер, который вы хотите настроить или введите "
"название устройства/имя файла в строке ввода данных"

#: printer/printerdrake.pm:1585
#, c-format
msgid ""
"Please choose the printer to which the print jobs should go or enter a "
"device name/file name in the input line"
msgstr ""
"Пожалуйста, выберите принтер, на который должны поступать задания или "
"введите название устройства/имя файла в строке ввода данных"

#: printer/printerdrake.pm:1589
#, c-format
msgid ""
"The configuration of the printer will work fully automatically. If your "
"printer was not correctly detected or if you prefer a customized printer "
"configuration, turn on \"Manual configuration\"."
msgstr ""
"Настройка принтера будет полностью выполнена автоматически. Если ваш принтер "
"был определен неправильно или вы предпочитаете настраивать принтер вручную, "
"включите \"Ручную настройку\"."

#: printer/printerdrake.pm:1590
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr "На данный момент альтернативный вариант отсутствует"

#: printer/printerdrake.pm:1593
#, c-format
msgid ""
"Please choose the printer you want to set up. The configuration of the "
"printer will work fully automatically. If your printer was not correctly "
"detected or if you prefer a customized printer configuration, turn on "
"\"Manual configuration\"."
msgstr ""
"Пожалуйста, выберите принтер, который вы хотите настроить. Настройка "
"принтера будет выполнена полностью автоматически. Если ваш принтер был "
"определен неправильно или вы предпочитаете настраивать принтер вручную, "
"включите \"Ручную настройку\"."

#: printer/printerdrake.pm:1594
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "Пожалуйста, выберите принтер, на который должны поступать задания."

#: printer/printerdrake.pm:1596
#, c-format
msgid ""
"Please choose the port that your printer is connected to or enter a device "
"name/file name in the input line"
msgstr ""
"Пожалуйста, выберите порт, к которому подключен ваш принтер или введите "
"название устройства/имя файла в строке ввода данных."

#: printer/printerdrake.pm:1597
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "Пожалуйста, выберите порт, к которому подключен ваш принтер."

#: printer/printerdrake.pm:1599
#, c-format
msgid ""
" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (Параллельные порты: /dev/lpt0, dev/lpt1, ..., соответствуют LPT1:, "
"LPT2:, ..., 1-й принтер USB: /dev/usb/lp0, 2-й принтер USB: /dev/usb/"
"lp1, ...)."

#: printer/printerdrake.pm:1603
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "Вы должны выбрать/ввести принтер/устройство!"

#: printer/printerdrake.pm:1643 printer/printerdrake.pm:1706
#: printer/printerdrake.pm:1798 printer/printerdrake.pm:1936
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2179
#: printer/printerdrake.pm:2270 printer/printerdrake.pm:2279
#: printer/printerdrake.pm:2288 printer/printerdrake.pm:2299
#, c-format
msgid "Aborting"
msgstr "Прекращение"

#: printer/printerdrake.pm:1679
#, c-format
msgid "Remote lpd Printer Options"
msgstr "Параметры удаленного принтера lpd"

#: printer/printerdrake.pm:1680
#, c-format
msgid ""
"To use a remote lpd printer, you need to supply the hostname of the printer "
"server and the printer name on that server."
msgstr ""
"Чтобы использовать удаленный принтер lpd, вам необходимо указать имя хоста "
"сервера печати и имя принтера на этом сервере."

#: printer/printerdrake.pm:1681
#, c-format
msgid "Remote host name"
msgstr "Имя удаленного хоста"

#: printer/printerdrake.pm:1682
#, c-format
msgid "Remote printer name"
msgstr "Имя удаленного принтера"

#: printer/printerdrake.pm:1685
#, c-format
msgid "Remote host name missing!"
msgstr "Отсутствует имя удаленного хоста!"

#: printer/printerdrake.pm:1689
#, c-format
msgid "Remote printer name missing!"
msgstr "Отсутствует имя удаленного принтера!"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318 standalone/drakTermServ:447
#: standalone/drakTermServ:769 standalone/drakTermServ:785
#: standalone/drakTermServ:1591 standalone/drakTermServ:1600
#: standalone/drakTermServ:1614 standalone/drakbackup:512
#: standalone/drakbackup:618 standalone/drakbackup:653
#: standalone/drakbackup:754 standalone/draknfs:203
#: standalone/draksambashare:629 standalone/draksambashare:796
#: standalone/harddrake2:276
#, c-format
msgid "Information"
msgstr "Информация"

#: printer/printerdrake.pm:1719 printer/printerdrake.pm:2195
#: printer/printerdrake.pm:2318
#, c-format
msgid "Detected model: %s %s"
msgstr "Обнаружена модель: %s %s"

#: printer/printerdrake.pm:1802 printer/printerdrake.pm:2064
#, c-format
msgid "Scanning network..."
msgstr "Сканируется сеть..."

#: printer/printerdrake.pm:1814 printer/printerdrake.pm:1835
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", принтер \"%s\" на сервере \"%s\""

#: printer/printerdrake.pm:1817 printer/printerdrake.pm:1838
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "Принтер \"%s\" на сервере \"%s\""

#: printer/printerdrake.pm:1859
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "Параметры принтера SMB (Windows 9x/NT)"

#: printer/printerdrake.pm:1860
#, c-format
msgid ""
"To print to a SMB printer, you need to provide the SMB host name (Note! It "
"may be different from its TCP/IP hostname!) and possibly the IP address of "
"the print server, as well as the share name for the printer you wish to "
"access and any applicable user name, password, and workgroup information."
msgstr ""
"Чтобы печатать на принтере SMB, вам необходимо указать имя хоста SMB "
"(Запомните! Оно может отличаться от имени хоста TCP/IP!), и, возможно, IP-"
"адрес сервера печати, а также имя общего ресурса для принтера, к которому вы "
"хотите получить доступ, и любую приемлемую информацию с именем пользователя, "
"паролем и рабочей группой."

#: printer/printerdrake.pm:1861
#, c-format
msgid ""
" If the desired printer was auto-detected, simply choose it from the list "
"and then add user name, password, and/or workgroup if needed."
msgstr ""
"Если необходимый принтер был определен автоматически, просто выберите его из "
"списка, а затем добавьте, если необходимо, имя пользователя, пароль и/или "
"рабочую группу."

#: printer/printerdrake.pm:1863
#, c-format
msgid "SMB server host"
msgstr "Хост сервера SMB"

#: printer/printerdrake.pm:1864
#, c-format
msgid "SMB server IP"
msgstr "IP сервера SMB"

#: printer/printerdrake.pm:1865 standalone/draksambashare:67
#, c-format
msgid "Share name"
msgstr "Имя общего ресурса"

#: printer/printerdrake.pm:1868
#, c-format
msgid "Workgroup"
msgstr "Рабочая группа"

#: printer/printerdrake.pm:1870
#, c-format
msgid "Auto-detected"
msgstr "Определен автоматически"

#: printer/printerdrake.pm:1880
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "Или имя сервера, или IP сервера должен быть задан!"

#: printer/printerdrake.pm:1884
#, c-format
msgid "Samba share name missing!"
msgstr "Отсутствует имя общего ресурса samba!"

#: printer/printerdrake.pm:1890
#, c-format
msgid "SECURITY WARNING!"
msgstr "ПРЕДУПРЕЖДЕНИЕ О БЕЗОПАСНОСТИ!"

#: printer/printerdrake.pm:1891
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to "
"a fault in the architecture of the Samba client software the password is put "
"in clear text into the command line of the Samba client used to transmit the "
"print job to the Windows server. So it is possible for every user on this "
"machine to display the password on the screen by issuing commands as \"ps "
"auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases "
"you have to make sure that only machines from your local network have access "
"to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account "
"or a special account dedicated for printing. Do not remove the password "
"protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD "
"protocol. Then set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Вы собираетесь настроить печать для учетной записи Windows с паролем. "
"Вследствие недоработки в архитектуре программного обеспечения Samba-клиента "
"пароль передается открытым текстом в командной строке Samba-клиента, "
"используемой для отправки задания печати на сервер Windows. Поэтому каждый "
"пользователь этой машины может вывести пароль на экран, применив команды "
"типа \"ps auxwww\".\n"
"\n"
"Мы рекомендуем использовать один из следующих вариантов (во любом случае вы "
"должны убедиться, что только машины из вашей локальной сети имеют доступ к "
"вашему серверу Windows, например, посредством файервола):\n"
"Используйте на своем сервере Windows учетную запись без пароля, такую как "
"учетная запись \"ГОСТЬ\" или специальную учетную запись, предназначенную для "
"печати. Не снимайте защиту паролем с личной учетной записи или учетной "
"записи администратора.\n"
"\n"
"Настройте свой сервер Windows так, чтобы принтер был доступен по протоколу "
"LPD. Затем в Printerdrake настройте печать с этой машины с типом соединения "
"\"%s\".\n"
"\n"

#: printer/printerdrake.pm:1901
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP "
"protocol and set up printing from this machine with the \"%s\" connection "
"type in Printerdrake.\n"
"\n"
msgstr ""
"Настройте свой сервер Windows так, чтобы принтер был доступен по протоколу "
"IPP. Затем в Printerdrake настройте печать с этой машины с типом соединения "
"\"%s\".\n"
"\n"

#: printer/printerdrake.pm:1904
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) "
"connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"Подключите свой принтер к Linux-серверу и разрешите своим машинам под "
"Windows подключаться к нему в качестве клиента.\n"
"\n"
"Вы действительно хотите продолжить установку этого принтера?"

#: printer/printerdrake.pm:1983
#, c-format
msgid "NetWare Printer Options"
msgstr "Параметры принтера NetWare"

#: printer/printerdrake.pm:1984
#, c-format
msgid ""
"To print on a NetWare printer, you need to provide the NetWare print server "
"name (Note! it may be different from its TCP/IP hostname!) as well as the "
"print queue name for the printer you wish to access and any applicable user "
"name and password."
msgstr ""
"Чтобы печатать на принтере NetWare, вам необходимо указать имя сервера "
"печати NetWare (Запомните! Оно может отличаться от имени хоста TCP/IP!), а "
"также имя очереди заданий на печать для принтера, к которому вы хотите иметь "
"доступ, и любое приемлемое имя пользователя и пароль."

#: printer/printerdrake.pm:1985
#, c-format
msgid "Printer Server"
msgstr "Сервер печати"

#: printer/printerdrake.pm:1986
#, c-format
msgid "Print Queue Name"
msgstr "Имя очереди заданий на печать"

#: printer/printerdrake.pm:1991
#, c-format
msgid "NCP server name missing!"
msgstr "Отсутствует имя сервера NCP!"

#: printer/printerdrake.pm:1995
#, c-format
msgid "NCP queue name missing!"
msgstr "Отсутствует имя очереди заданий на печать NCP!"

#: printer/printerdrake.pm:2076 printer/printerdrake.pm:2097
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", хост \"%s\", порт %s"

#: printer/printerdrake.pm:2079 printer/printerdrake.pm:2100
#, c-format
msgid "Host \"%s\", port %s"
msgstr "Хост \"%s\", порт %s"

#: printer/printerdrake.pm:2122
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "Параметры принтера TCP/Socket"

#: printer/printerdrake.pm:2124
#, c-format
msgid ""
"Choose one of the auto-detected printers from the list or enter the hostname "
"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"Выберите один из автоматически определенных принтеров из списка или введите "
"имя хоста или IP-адрес и необязательный номер порта (по умолчанию равен "
"9100) в полях для ввода данных."

#: printer/printerdrake.pm:2125
#, c-format
msgid ""
"To print to a TCP or socket printer, you need to provide the host name or IP "
"of the printer and optionally the port number (default is 9100). On HP "
"JetDirect servers the port number is usually 9100, on other servers it can "
"vary. See the manual of your hardware."
msgstr ""
"Чтобы печатать на принтере TCP или socket, вам необходимо указать имя хоста "
"или IP-адрес принтера и необязательный номер порта (по умолчанию равен "
"9100). На серверах HP JetDirect номер порта обычно равен 9100, на других "
"серверах он может отличаться. Смотрите инструкцию к своему оборудованию."

#: printer/printerdrake.pm:2129
#, c-format
msgid "Printer host name or IP missing!"
msgstr "Отсутствует имя хоста принтера или IP!"

#: printer/printerdrake.pm:2158
#, c-format
msgid "Printer host name or IP"
msgstr "Имя хоста машины принтера или IP"

#: printer/printerdrake.pm:2221
#, c-format
msgid "Refreshing Device URI list..."
msgstr "Обновляется список URI устройств..."

#: printer/printerdrake.pm:2224 printer/printerdrake.pm:2226
#, c-format
msgid "Printer Device URI"
msgstr "URI устройства печати"

#: printer/printerdrake.pm:2225
#, c-format
msgid ""
"You can specify directly the URI to access the printer. The URI must fulfill "
"either the CUPS or the Foomatic specifications. Note that not all URI types "
"are supported by all the spoolers."
msgstr ""
"Вы можете непосредственно указать URI, чтобы получить доступ к принтеру. URI "
"должен удовлетворять спецификациям или CUPS, или Foomatic. Помните, что не "
"все типы URI поддерживаются всеми спулерами."

#: printer/printerdrake.pm:2249
#, c-format
msgid "A valid URI must be entered!"
msgstr "Должен быть введен правильный URI!"

#: printer/printerdrake.pm:2354
#, c-format
msgid "Pipe into command"
msgstr "передавать через канал в команду"

#: printer/printerdrake.pm:2355
#, c-format
msgid ""
"Here you can specify any arbitrary command line into which the job should be "
"piped instead of being sent directly to a printer."
msgstr ""
"Здесь вы можете указать любую командную строку, в которую задание должно "
"быть передано через конвейер вместо прямой отправки на принтер."

#: printer/printerdrake.pm:2356
#, c-format
msgid "Command line"
msgstr "Командная строка"

#: printer/printerdrake.pm:2360
#, c-format
msgid "A command line must be entered!"
msgstr "Должна быть введена командная строка!"

#: printer/printerdrake.pm:2402
#, c-format
msgid "Your printer %s is currently connected %s."
msgstr ""

#: printer/printerdrake.pm:2404 printer/printerdrake.pm:2411
#, fuzzy, c-format
msgid "to a parallel port"
msgstr " на параллельном порту #%s"

#: printer/printerdrake.pm:2405 printer/printerdrake.pm:2412
#, c-format
msgid "to the USB"
msgstr ""

#: printer/printerdrake.pm:2406 printer/printerdrake.pm:2413
#, fuzzy, c-format
msgid "via the network"
msgstr "Поднимается сеть"

#: printer/printerdrake.pm:2407
#, c-format
msgid "This type of connection is currently not fully supported by HPLIP."
msgstr ""

#: printer/printerdrake.pm:2409
#, c-format
msgid "You get full HPLIP support for your device if you connect it "
msgstr ""

#: printer/printerdrake.pm:2415
#, c-format
msgid ""
"You can now set up your device with HPLIP anyway (works in many cases), "
msgstr ""

#: printer/printerdrake.pm:2416
#, c-format
msgid "set it up without HPLIP (print-only), "
msgstr ""

#: printer/printerdrake.pm:2416
#, fuzzy, c-format
msgid "or"
msgstr "Час"

#: printer/printerdrake.pm:2417
#, c-format
msgid "cancel the setup (for example to reconnect your device)."
msgstr ""

#: printer/printerdrake.pm:2419
#, c-format
msgid ""
"You can always revise your choice by clicking your printer's entry in the "
"main window, "
msgstr ""

#: printer/printerdrake.pm:2420
#, c-format
msgid "clicking the \"%s\" button, "
msgstr ""

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: printer/printerdrake.pm:2420 standalone/drakperm:124 standalone/drakups:302
#: standalone/drakups:362 standalone/drakups:382 standalone/drakvpn:319
#: standalone/drakvpn:680 standalone/printerdrake:245
#, c-format
msgid "Edit"
msgstr "Редактировать"

#: printer/printerdrake.pm:2421
#, c-format
msgid "and choosing \"%s\"."
msgstr ""

#: printer/printerdrake.pm:2421 printer/printerdrake.pm:5312
#: printer/printerdrake.pm:5372
#, c-format
msgid "Printer connection type"
msgstr "Тип подключения принтера"

#: printer/printerdrake.pm:2423 standalone/logdrake:409
#, c-format
msgid "What do you want to do?"
msgstr "Что вы хотите сделать?"

#: printer/printerdrake.pm:2424 printer/printerdrake.pm:2427
#, c-format
msgid "Set up with HPLIP"
msgstr ""

#: printer/printerdrake.pm:2425 printer/printerdrake.pm:2429
#, c-format
msgid "Set up without HPLIP"
msgstr ""

#: printer/printerdrake.pm:2426
#, fuzzy, c-format
msgid "Cancel setup"
msgstr "Отмена"

#: printer/printerdrake.pm:2460
#, c-format
msgid ""
"On many HP printers there are special functions available, maintenance (ink "
"level checking, nozzle cleaning. head alignment, ...) on all not too old "
"inkjets, scanning on multi-function devices, and memory card access on "
"printers with card readers. "
msgstr ""
"Для большинства HP принтеров доступны специальные функции, обслуживание "
"(проверка уровня чернил, очистка сопел, выравнивание головок, ...) на всех "
"не слишком древних струйниках, сканирование на многофункциональных "
"устройствах и доступ к картам памяти на принтерах с карт-ридером. "

#: printer/printerdrake.pm:2462
#, fuzzy, c-format
msgid ""
"To access these extra functions on HP printers they must be set up with "
"HPLIP (HP Linux Imaging and Printing). "
msgstr ""
"Для доступа к специальным функциям на вашем HP принтере должно быть "
"установлено соответствующее ПО: "

#: printer/printerdrake.pm:2464
#, fuzzy, c-format
msgid "Do you want to use HPLIP (choose \"No\" for non-HP printers)? "
msgstr ""
"Каков ваш выбор (выберите \"Никакой (None)\" для отличных от HP принтеров)? "

#: printer/printerdrake.pm:2490
#, c-format
msgid "Installing %s package..."
msgstr "Устанавливается пакет %s..."

#: printer/printerdrake.pm:2490 printer/printerdrake.pm:2496
#: printer/printerdrake.pm:2524
#, c-format
msgid "HPLIP"
msgstr "HPLIP"

#: printer/printerdrake.pm:2497
#, c-format
msgid "Only printing will be possible on the %s."
msgstr "На %s можно будет только печатать."

#: printer/printerdrake.pm:2512
#, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr ""
"Не удалось удалить ваш старый конфигурационный файл HPOJ %s для вашего: %s!"

#: printer/printerdrake.pm:2514
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr "Пожалуйста, удалите файл вручную и перезапустите HPOJ."

#: printer/printerdrake.pm:2524
#, c-format
msgid "Checking device and configuring %s..."
msgstr "Проверяется устройство и настраивается %s..."

#: printer/printerdrake.pm:2544
#, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "Какой принтер вы хотите настроить с помощью HPLIP?"

#: printer/printerdrake.pm:2599
#, c-format
msgid "Installing SANE packages..."
msgstr "Устанавливаются пакеты SANE..."

#: printer/printerdrake.pm:2612
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr "Сканирование на %s будет невозможно."

#: printer/printerdrake.pm:2627
#, c-format
msgid "Using and Maintaining your %s"
msgstr "Использование и обслуживание вашего %s"

#: printer/printerdrake.pm:2641
#, c-format
msgid "Configuring device..."
msgstr "Настройка устройства..."

#: printer/printerdrake.pm:2678
#, c-format
msgid "Making printer port available for CUPS..."
msgstr "Порт принтера делается доступным для CUPS..."

#: printer/printerdrake.pm:2688 printer/printerdrake.pm:2962
#: printer/printerdrake.pm:3115
#, c-format
msgid "Reading printer database..."
msgstr "Читается база данных принтеров..."

#: printer/printerdrake.pm:2920
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "Введите Имя принтера и Комментарии"

#: printer/printerdrake.pm:2924 printer/printerdrake.pm:4183
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr ""
"Имя принтера должно содержать только буквы, цифры и символ подчеркивания"

#: printer/printerdrake.pm:2930 printer/printerdrake.pm:4188
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"Принтер \"%s\" уже существует,\n"
"вы действительно хотите перезаписать его конфигурацию?"

#: printer/printerdrake.pm:2937
#, c-format
msgid ""
"The printer name \"%s\" has more than 12 characters which can make the "
"printer unaccessible from Windows clients. Do you really want to use this "
"name?"
msgstr ""
"Имя принтера \"%s\" состоит из более чем 12 символов, что приведет к его "
"недоступности с клиентов Windows. Вам обязательно использовать такое имя?"

#: printer/printerdrake.pm:2946
#, c-format
msgid ""
"Every printer needs a name (for example \"printer\"). The Description and "
"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"Для каждого принтера требуется имя (например, \"printer\"). Поля Описание и "
"Местоположение могут остаться незаполненными. Они представляют собой "
"комментарии для пользователей."

#: printer/printerdrake.pm:2947
#, c-format
msgid "Name of printer"
msgstr "Имя принтера"

#: printer/printerdrake.pm:2948 standalone/drakconnect:592
#: standalone/harddrake2:39 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Description"
msgstr "Описание"

#: printer/printerdrake.pm:2949 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "Location"
msgstr "Местоположение"

#: printer/printerdrake.pm:2967
#, c-format
msgid "Preparing printer database..."
msgstr "Подготавливается база данных принтеров..."

#: printer/printerdrake.pm:3093
#, c-format
msgid "Your printer model"
msgstr "Модель вашего принтера"

#: printer/printerdrake.pm:3094
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-"
"detection with the models listed in its printer database to find the best "
"match. This choice can be wrong, especially when your printer is not listed "
"at all in the database. So check whether the choice is correct and click "
"\"The model is correct\" if so and if not, click \"Select model manually\" "
"so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"Printerdrake сравнил название модели, полученное при автоопределении "
"принтера с моделями, перечисленными в его базе данных принтеров для поиска "
"наилучшего соответствия. Этот выбор может быть неправильным, особенно, если "
"ваш принтер вообще не включен в базу данных. Поэтому проверьте правильность "
"выбора и нажмите \"Модель верна\", если это так, а если нет - нажмите "
"\"Выбрать модель вручную\", и вы сможете на следующем экране выбрать модель "
"своего принтера вручную.\n"
"Для вашего принтера Printerdrake нашел:\n"
"%s"

#: printer/printerdrake.pm:3099 printer/printerdrake.pm:3102
#, c-format
msgid "The model is correct"
msgstr "Модель верна?"

#: printer/printerdrake.pm:3100 printer/printerdrake.pm:3101
#: printer/printerdrake.pm:3104
#, c-format
msgid "Select model manually"
msgstr "Выберите модель вручную"

#: printer/printerdrake.pm:3128
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer "
"model correctly. Find the correct model in the list when a wrong model or "
"\"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"Пожалуйста, проверьте правильно ли Printerdrake определил модель вашего "
"принтера. Найдите правильную модель в списке, если выбрана неверная модель "
"или \"Принтер печати необработанных данных\"."

#: printer/printerdrake.pm:3147
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr "Установить предоставленный производителем PPD файл"

#: printer/printerdrake.pm:3179
#, c-format
msgid ""
"Every PostScript printer is delivered with a PPD file which describes the "
"printer's options and features."
msgstr ""
"Каждый PostScript принтер поставляется с PPD файлом, который описывает "
"параметры и возможности принтера."

#: printer/printerdrake.pm:3180
#, c-format
msgid ""
"This file is usually somewhere on the CD with the Windows and Mac drivers "
"delivered with the printer."
msgstr ""
"Такой файл обычно идет на поставляемом с принтером CD с драйверами для "
"Windows и Mac."

#: printer/printerdrake.pm:3181
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr "Также вы можете найти PPD файлы на сайтах производителей."

#: printer/printerdrake.pm:3182
#, c-format
msgid ""
"If you have Windows installed on your machine, you can find the PPD file on "
"your Windows partition, too."
msgstr ""
"Если у вас на машине установлена Windows, вы также можете поискать PPD файлы "
"на ее разделе."

#: printer/printerdrake.pm:3183
#, c-format
msgid ""
"Installing the printer's PPD file and using it when setting up the printer "
"makes all options of the printer available which are provided by the "
"printer's hardware"
msgstr ""
"Установка и использование PPD файлов при настройке принтера позволяет "
"использовать все опции принтера, которые несет в себе оборудование принтера"

#: printer/printerdrake.pm:3184
#, c-format
msgid ""
"Here you can choose the PPD file to be installed on your machine, it will "
"then be used for the setup of your printer."
msgstr ""
"Здесь можно выбрать PPD файл для установки на вашу машину. Он будет "
"использован при настройке вашего принтера."

#: printer/printerdrake.pm:3186
#, c-format
msgid "Install PPD file from"
msgstr "Установить PPD файл из"

#: printer/printerdrake.pm:3189 printer/printerdrake.pm:3197
#: standalone/scannerdrake:183 standalone/scannerdrake:192
#: standalone/scannerdrake:242 standalone/scannerdrake:250
#, c-format
msgid "Floppy Disk"
msgstr "Дискета"

#: printer/printerdrake.pm:3190 printer/printerdrake.pm:3199
#: standalone/scannerdrake:184 standalone/scannerdrake:194
#: standalone/scannerdrake:243 standalone/scannerdrake:252
#, c-format
msgid "Other place"
msgstr "Другое место"

#: printer/printerdrake.pm:3205
#, c-format
msgid "Select PPD file"
msgstr "Выберите PPD файл"

#: printer/printerdrake.pm:3209
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr "PPD файл %s не существует или его невозможно прочесть!"

#: printer/printerdrake.pm:3215
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr "PPD файл %s не соответствует спецификации PPD!"

#: printer/printerdrake.pm:3226
#, c-format
msgid "Installing PPD file..."
msgstr "Устанавливается PPD файл..."

#: printer/printerdrake.pm:3345
#, c-format
msgid "OKI winprinter configuration"
msgstr "Настройка win-принтера OKI"

#: printer/printerdrake.pm:3346
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when "
"connected to the first parallel port. When your printer is connected to "
"another port or to a print server box please connect the printer to the "
"first parallel port before you print a test page. Otherwise the printer will "
"not work. Your connection type setting will be ignored by the driver."
msgstr ""
"Вы настраиваете лазерный win-принтер OKI. Эти принтеры используют\n"
"очень специфический протокол связи и поэтому они работают только, когда "
"подключены к первому параллельному порту. Когда ваш принтер подключен к "
"другому порту или к серверу печати, пожалуйста, подключите принтер к первому "
"параллельному порту перед тем, как напечатать пробную страницу. Иначе "
"принтер не будет работать. Настроенный вами тип подключения будет "
"проигнорирован драйвером."

#: printer/printerdrake.pm:3371 printer/printerdrake.pm:3401
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Настройка Lexmark inkjet"

#: printer/printerdrake.pm:3372
#, c-format
msgid ""
"The inkjet printer drivers provided by Lexmark only support local printers, "
"no printers on remote machines or print server boxes. Please connect your "
"printer to a local port or configure it on the machine where it is connected "
"to."
msgstr ""
"Драйверы принтера inkjet, предоставленные Lexmark'ом, поддерживают только "
"локальные принтеры, принтеры на удаленных машинах или серверах печати не "
"поддерживаются. Пожалуйста, подключите свой принтер к локальному порту или "
"настройте его на машине, к которой он подключен."

#: printer/printerdrake.pm:3402
#, c-format
msgid ""
"To be able to print with your Lexmark inkjet and this configuration, you "
"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
"\"Linux\" as operating system. The drivers come as RPM packages or shell "
"scripts with interactive graphical installation. You do not need to do this "
"configuration by the graphical frontends. Cancel directly after the license "
"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
"adjust the head alignment settings with this program."
msgstr ""
"Чтобы печатать на своем Lexmark inkjet и с этой конфигурацией, вам нужны "
"драйверы принтера inkjet, предоставляемые Lexmark'ом (http://www.lexmark."
"com/). Кликните на ссылку \"Drivers\". Затем выберите свою модель, а затем "
"операционную систему \"Linux\". Драйверы поставляются в виде пакетов RPM или "
"скриптов командного процессора с интерактивной графической установкой. Вам "
"нет необходимости выполнять эту настройку посредством графического "
"интерфейса. Отмените ее сразу после лицензионного соглашения. Затем "
"напечатайте страницы для регулировки печатающей головки посредством "
"\"lexmarkmaintain\" и отъюстируйте положение головки при помощи этой "
"программы."

#: printer/printerdrake.pm:3412
#, c-format
msgid "Lexmark X125 configuration"
msgstr "Настройка Lexmark X125"

#: printer/printerdrake.pm:3413
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes. Please connect "
"your printer to a local USB port or configure it on the machine where it is "
"connected to."
msgstr ""
"Драйвер данного принтера поддерживает только локально подключенные через USB "
"принтера, принтеры на удаленных машинах или серверах печати не "
"поддерживаются. Пожалуйста, подключите свой принтер к локальному порту или "
"настройте его на машине, к которой он подключен."

#: printer/printerdrake.pm:3435
#, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "Настройка Samsung ML/QL-85G"

#: printer/printerdrake.pm:3436 printer/printerdrake.pm:3463
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected on the "
"first parallel port, no printers on remote machines or print server boxes or "
"on other parallel ports. Please connect your printer to the first parallel "
"port or configure it on the machine where it is connected to."
msgstr ""
"Драйвер данного принтера поддерживает только локально подключенные через "
"первый параллельный порт принтера, принтеры на удаленных машинах или "
"серверах печати не поддерживаются. Пожалуйста, подключите свой принтер к "
"первому параллельному порту или настройте его на машине, к которой он "
"подключен."

#: printer/printerdrake.pm:3462
#, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "Настройка Canon LBP-460/660"

#: printer/printerdrake.pm:3489
#, c-format
msgid "Canon LBP-810/1120 (CAPT) configuration"
msgstr "Настройка Canon LBP-810/1120 (CAPT)"

#: printer/printerdrake.pm:3490
#, c-format
msgid ""
"The driver for this printer only supports printers locally connected via "
"USB, no printers on remote machines or print server boxes or on the parallel "
"port. Please connect your printer to the USB or configure it on the machine "
"where it is directly connected to."
msgstr ""
"Драйвер данного принтера поддерживает только локально подключенные через USB "
"принтера. Принтеры на удаленных машинах , серверах печати или на "
"параллельных портах не поддерживаются. Пожалуйста, подключите свой принтер к "
"USB или настройте его на машине, к которой он подключен."

#: printer/printerdrake.pm:3497
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr "Firmware-Upload для HP LaserJet 1000"

#: printer/printerdrake.pm:3647
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if "
"available) and also the hardware configuration of laser printers (memory, "
"duplex unit, extra trays) are set correctly. Note that with a very high "
"printout quality/resolution printing can get substantially slower."
msgstr ""
"Настройки принтера по умолчанию\n"
"Вы должны убедиться, что размер страницы и тип чернил/режим печати (если "
"доступен), а также конфигурация оборудования лазерных принтеров (память, "
"кабель двухстороннего обмена, дополнительные лотки) правильно установлены. "
"Помните, что печать с очень высоким качеством/разрешением вывода данных "
"может значительно замедлиться."

#: printer/printerdrake.pm:3772
#, c-format
msgid "Printer default settings"
msgstr "Установки принтера по умолчанию"

#: printer/printerdrake.pm:3779
#, c-format
msgid "Option %s must be an integer number!"
msgstr "Параметр %s должен быть целым числом!"

#: printer/printerdrake.pm:3783
#, c-format
msgid "Option %s must be a number!"
msgstr "Параметр %s должен быть числом!"

#: printer/printerdrake.pm:3787
#, c-format
msgid "Option %s out of range!"
msgstr "Параметр %s за пределами диапазона!"

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr ""
"Хотите сделать этот принтер (\"%s\")\n"
"принтером по умолчанию?"

#: printer/printerdrake.pm:3855
#, c-format
msgid "Test pages"
msgstr "Тестовые страницы"

#: printer/printerdrake.pm:3856
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on "
"laser printers with too low memory it can even not come out. In most cases "
"it is enough to print the standard test page."
msgstr ""
"Пожалуйста, выберите тестовые страницы, которые вы хотите напечатать.\n"
"Помните: печать фотографической тестовой страницы может занять довольно "
"много времени на лазерных принтерах с малым объемом памяти, она даже может "
"вообще не напечататься. В большинстве случаев достаточно напечатать "
"стандартную тестовую страницу."

#: printer/printerdrake.pm:3860
#, c-format
msgid "No test pages"
msgstr "Тестовые страницы отсутствуют"

#: printer/printerdrake.pm:3861
#, c-format
msgid "Print"
msgstr "Печать"

#: printer/printerdrake.pm:3886
#, c-format
msgid "Standard test page"
msgstr "Стандартная тестовая страница"

#: printer/printerdrake.pm:3889
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Альтернативная тестовая страница (формат письма)"

#: printer/printerdrake.pm:3892
#, c-format
msgid "Alternative test page (A4)"
msgstr "Альтернативная тестовая страница (формат А4)"

#: printer/printerdrake.pm:3894
#, c-format
msgid "Photo test page"
msgstr "Фотографическая тестовая страница"

#: printer/printerdrake.pm:3907
#, c-format
msgid "Printing test page(s)..."
msgstr "Печатается тестовая страница..."

#: printer/printerdrake.pm:3927
#, c-format
msgid "Skipping photo test page."
msgstr "Пропускается фотографическая тестовая страница"

#: printer/printerdrake.pm:3944
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"Тестовая страница была отправлена на принтер.\n"
"Может пройти некоторое время, перед тем как принтер заработает.\n"
"Состояние печати:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3948
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"Тестовая страница была отправлена на принтер.\n"
"Может пройти некоторое время, перед тем как принтер заработает.\n"

#: printer/printerdrake.pm:3958
#, c-format
msgid "Did it work properly?"
msgstr "Он работал правильно?"

#: printer/printerdrake.pm:3982
#, c-format
msgid "Raw printer"
msgstr "Принтер печати необработанных данных"

#: printer/printerdrake.pm:4004
#, c-format
msgid ""
"To print a file from the command line (terminal window) you can either use "
"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
"to modify the option settings easily.\n"
msgstr ""
"Чтобы напечатать файл из командной строки (окна терминала), вы можете "
"использовать команду \"%s <файл>\" или графическую утилиту печати: \"xpp "
"<файл>\" или \"kprinter <файл>\". Графические утилиты позволяют вам выбрать "
"принтер и легко изменить параметры.\n"

#: printer/printerdrake.pm:4006
#, c-format
msgid ""
"These commands you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications, but here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Эти команды вы также можете использовать в поле \"Команда печати\" диалогов "
"печати во многих приложениях, но имена файлов не поддерживаются, потому что "
"файл для печати поставляется приложением.\n"

#: printer/printerdrake.pm:4009 printer/printerdrake.pm:4026
#: printer/printerdrake.pm:4036
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a "
"particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"Команда \"%s\" также позволяет изменять параметры отдельного задания печати. "
"Просто добавьте в командной строке необходимые опции, например, \"%s <файл>"
"\"."

#: printer/printerdrake.pm:4012 printer/printerdrake.pm:4052
#, c-format
msgid ""
"To know about the options available for the current printer read either the "
"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"Чтобы узнать об опциях, доступных для данного принтера, прочтите "
"представленный ниже список или нажмите на кнопку \"Список опций печати\".%s%s"
"%s\n"

#: printer/printerdrake.pm:4016
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"Здесь представлен список опций печати, доступных для данного принтера:\n"

#: printer/printerdrake.pm:4021 printer/printerdrake.pm:4031
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\".\n"
msgstr ""
"Чтобы напечатать файл из командной строки (окна терминала), используйте "
"команду \"%s <файл>\".\n"

#: printer/printerdrake.pm:4023 printer/printerdrake.pm:4033
#: printer/printerdrake.pm:4043
#, c-format
msgid ""
"This command you can also use in the \"Printing command\" field of the "
"printing dialogs of many applications. But here do not supply the file name "
"because the file to print is provided by the application.\n"
msgstr ""
"Эту команду вы также можете использовать в поле \"Команда печати\" диалогов "
"печати во многих приложениях. Но имена файлов здесь не поддерживаются, "
"потому что файл для печати поставляется приложением.\n"

#: printer/printerdrake.pm:4028 printer/printerdrake.pm:4038
#, c-format
msgid ""
"To get a list of the options available for the current printer click on the "
"\"Print option list\" button."
msgstr ""
"Чтобы получить список опций, доступных для данного принтера, щелкните на "
"кнопку \"Список опций печати\"."

#: printer/printerdrake.pm:4041
#, c-format
msgid ""
"To print a file from the command line (terminal window) use the command \"%s "
"<file>\" or \"%s <file>\".\n"
msgstr ""
"Чтобы напечатать файл из командной строки (окна терминала), используйте "
"команду \"%s <файл>\" или \"%s <файл>\".\n"

#: printer/printerdrake.pm:4045
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and "
"handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an "
"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
"jobs immediately when you click it. This is for example useful for paper "
"jams.\n"
msgstr ""
"Вы можете также использовать графический интерфейс \"xpdq\" для установки "
"опций и управления заданиями печати.\n"
"Если вы используете графическую оболочку KDE, у вас есть \"аварийная кнопка"
"\" - значок на рабочем столе, с названием \"ОСТАНОВИТЬ принтер!\", который "
"немедленно останавливает все задания печати, когда вы щелкаете по нему. Это "
"полезно, например, при зажевывании бумаги.\n"

#: printer/printerdrake.pm:4049
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
"a particular printing job. Simply add the desired settings to the command "
"line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"Команды \"%s\" и \"%s\" также позволяют изменять параметры отдельного "
"задания печати. Просто добавьте в командной строке необходимые опции, "
"например, \"%s <файл>\".\n"

#: printer/printerdrake.pm:4058
#, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "Использование/Обслуживание принтера \"%s\""

#: printer/printerdrake.pm:4059
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "Печать на принтере \"%s\""

#: printer/printerdrake.pm:4065
#, c-format
msgid "Print option list"
msgstr "Список опций печати"

#: printer/printerdrake.pm:4069
#, fuzzy, c-format
msgid "Printing option list..."
msgstr "Список опций печати"

#: printer/printerdrake.pm:4087
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special "
"features of your printer are supported.\n"
"\n"
msgstr ""
"Ваш %s настроен с помощью ПО драйвера HP HPLIP. Таком образом поддерживается "
"множество специальных возможностей вашего принтера.\n"
"\n"

#: printer/printerdrake.pm:4090
#, c-format
msgid ""
"The scanner in your printer can be used with the usual SANE software, for "
"example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""
"Сканер в вашем принтере может быть использован в обычном ПО SANE, например в "
"Kooka или XSane (оба находятся в меню Мультимедиа/Графика). "

#: printer/printerdrake.pm:4091
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandriva Linux Control Center) to "
"share your scanner on the network.\n"
"\n"
msgstr ""
"Запустите Scannerdrake (Оборудование/Сканер в Центре управления Mandriva "
"Linux) чтобы раздать ваш сканер на сеть.\n"
"\n"

#: printer/printerdrake.pm:4095
#, c-format
msgid ""
"The memory card readers in your printer can be accessed like a usual USB "
"mass storage device. "
msgstr ""
"Доступ к считывателям карты памяти в вашем принтере можно получить как к "
"обычному USB устройству. "

#: printer/printerdrake.pm:4096
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on "
"your desktop.\n"
"\n"
msgstr ""
"После того как карта будет вставлена, на рабочем столе должна появиться "
"иконка жесткого диска для доступа к карте.\n"
"\n"

#: printer/printerdrake.pm:4098
#, c-format
msgid ""
"The memory card readers in your printer can be accessed using HP's Printer "
"Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access "
"Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""
"Доступ к считывателям карты памяти вашего принтера можно получить используя "
"HP Printer Toolbox (Меню: Система/Мониторинг/HP Printer Toolbox), нажав на "
"кнопку  \"Доступ к фотокартам...\" в закладке \"Функции\". "

#: printer/printerdrake.pm:4099
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB "
"card reader is usually faster.\n"
"\n"
msgstr ""
"Обратите внимание, что этот процесс очень медленный. Чтение картинок с "
"камеры или USB считывателя карт обычно намного быстрее.\n"
"\n"

#: printer/printerdrake.pm:4102
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a "
"lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""
"HP Printer Toolbox (Меню: Система/Мониторинг/HP Printer Toolbox) предлагает "
"множество функций слежения за состоянием и обслуживания вашего %s:\n"
"\n"

#: printer/printerdrake.pm:4103
#, c-format
msgid " - Ink level/status info\n"
msgstr " - Информация о статусе/уровне чернил\n"

#: printer/printerdrake.pm:4104
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr " - Очистка чернильных сопел\n"

#: printer/printerdrake.pm:4105
#, c-format
msgid " - Print head alignment\n"
msgstr " - Выравнивание головок печати\n"

#: printer/printerdrake.pm:4106
#, c-format
msgid " - Color calibration\n"
msgstr " - Настройка цвета\n"

#: printer/printerdrake.pm:4147 printer/printerdrake.pm:4174
#: printer/printerdrake.pm:4209
#, c-format
msgid "Transfer printer configuration"
msgstr "Передать конфигурацию принтера"

#: printer/printerdrake.pm:4148
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %"
"s to %s, your current spooler. All the configuration data (printer name, "
"description, location, connection type, and default option settings) is "
"overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"Вы можете скопировать конфигурацию принтера, собранную для спулера, %s на %s "
"- ваш текущий спулер. Будут переданы все данные конфигурации (имя принтера, "
"описание, расположение, тип подключения и настройки по умолчанию), но "
"задания перенесены не будут.\n"
"Не все очереди заданий на печать могут быть перенесены по следующим "
"причинам:\n"

#: printer/printerdrake.pm:4151
#, c-format
msgid ""
"CUPS does not support printers on Novell servers or printers sending the "
"data into a free-formed command.\n"
msgstr ""
"CUPS не поддерживает принтеры на серверах Novell или принтеры, отправляющие "
"данные в виде команды свободной формы.\n"

#: printer/printerdrake.pm:4153
#, c-format
msgid ""
"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
"printers.\n"
msgstr ""
"PDQ поддерживает только локальные принтеры, удаленные принтеры LPD и "
"принтеры Socket/TCP.\n"

#: printer/printerdrake.pm:4155
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "LPD и LPRng не поддерживают принтеры IPP.\n"

#: printer/printerdrake.pm:4157
#, c-format
msgid ""
"In addition, queues not created with this program or \"foomatic-configure\" "
"cannot be transferred."
msgstr ""
"Вдобавок очереди заданий на печать, не созданные этой программой или "
"\"foomatic-configure\", не могут быть перенесены."

#: printer/printerdrake.pm:4158
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers "
"or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"Принтеры, настроенные с файлами PPD, предоставленными их производителями, "
"или с родными драйверами CUPS также не могут быть перенесены."

#: printer/printerdrake.pm:4159
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"Отметьте принтеры, которые вы хотите перенести и нажмите \n"
"\"Перенести\"."

#: printer/printerdrake.pm:4162
#, c-format
msgid "Do not transfer printers"
msgstr "Не переносить принтеры"

#: printer/printerdrake.pm:4163 printer/printerdrake.pm:4179
#, c-format
msgid "Transfer"
msgstr "Перенести"

#: printer/printerdrake.pm:4175
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"Принтер с именем \"%s\" уже существует в %s. \n"
"Нажмите \"Перенести\", чтобы перезаписать его.\n"
"Вы можете также ввести новое имя или пропустить этот принтер."

#: printer/printerdrake.pm:4196
#, c-format
msgid "New printer name"
msgstr "Новое имя принтера"

# ../../printerdrake.pm_.c:2489 #, c-format
#: printer/printerdrake.pm:4199
#, c-format
msgid "Transferring %s..."
msgstr "Переносится %s..."

#: printer/printerdrake.pm:4210
#, c-format
msgid ""
"You have transferred your former default printer (\"%s\"), Should it be also "
"the default printer under the new printing system %s?"
msgstr ""
"Вы перенесли свой принтер, ранее использовавшийся по умолчанию (\"%s\"). "
"Должен ли он использоваться по умолчанию в новой системе печати %s?"

#: printer/printerdrake.pm:4220
#, c-format
msgid "Refreshing printer data..."
msgstr "Обновляются данные принтера..."

#: printer/printerdrake.pm:4230
#, c-format
msgid "Starting network..."
msgstr "Запускается сеть..."

#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4278
#: printer/printerdrake.pm:4280
#, c-format
msgid "Configure the network now"
msgstr "Настроить сеть сейчас"

#: printer/printerdrake.pm:4275
#, c-format
msgid "Network functionality not configured"
msgstr "Функциональные возможности сети не настроены"

#: printer/printerdrake.pm:4276
#, c-format
msgid ""
"You are going to configure a remote printer. This needs working network "
"access, but your network is not configured yet. If you go on without network "
"configuration, you will not be able to use the printer which you are "
"configuring now. How do you want to proceed?"
msgstr ""
"Вы собираетесь настроить удаленный принтер. Для этого необходим доступ к "
"работающей сети, но ваша сеть еще не настроена. Если вы продолжите без "
"настройки сети, вы будете не в состоянии использовать принтер, который вы "
"сейчас настраиваете. Как вы желаете продолжить?"

#: printer/printerdrake.pm:4279
#, c-format
msgid "Go on without configuring the network"
msgstr "Продолжить без настройки сети"

#: printer/printerdrake.pm:4310
#, c-format
msgid ""
"The network configuration done during the installation cannot be started "
"now. Please check whether the network is accessible after booting your "
"system and correct the configuration using the %s Control Center, section "
"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"Сеть, настроенная во время установки, не может быть сейчас запущена. "
"Пожалуйста, проверьте, будет ли доступна сеть после загрузки вашей системы и "
"подправьте конфигурацию при помощи Центра управления %s, раздел \"Сеть & "
"Интернет\"/\"Подключение\", а затем установите принтер, также при помощи "
"Центра управления %s, раздел \"Оборудование\"/\"Принтер\""

#: printer/printerdrake.pm:4311
#, c-format
msgid ""
"The network access was not running and could not be started. Please check "
"your configuration and your hardware. Then try to configure your remote "
"printer again."
msgstr ""
"Доступ к сети не выполнялся и не может быть запущен. Пожалуйста, проверьте "
"свою конфигурацию и оборудование. Затем снова попытайтесь настроить свой "
"удаленный принтер."

#: printer/printerdrake.pm:4321
#, c-format
msgid "Restarting printing system..."
msgstr "Перезапускается система печати..."

#: printer/printerdrake.pm:4352
#, c-format
msgid "high"
msgstr "высокий"

#: printer/printerdrake.pm:4352
#, c-format
msgid "paranoid"
msgstr "параноидальный"

#: printer/printerdrake.pm:4354
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "Установка системы печати с %s-м уровнем безопасности"

#: printer/printerdrake.pm:4355
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %"
"s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for "
"print jobs and handles them. This daemon is also accessible by remote "
"machines through the network and so it is a possible point for attacks. "
"Therefore only a few selected daemons are started by default in this "
"security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"Вы устанавливаете систему печати %s в систему, запущенную с %s-м уровнем "
"безопасности.\n"
"\n"
"Система печати запускает демон (фоновый процесс), который ожидает задания на "
"печать и управляет ими. Этот демон также доступен для удаленных машин через "
"сеть и таким образом он является возможной целью для атак. Поэтому только "
"несколько избранных демонов запускается по умолчанию с этим уровнем "
"безопасности.\n"
"\n"
"Вы действительно хотите настроить печать на этой машине?"

#: printer/printerdrake.pm:4391
#, c-format
msgid "Starting the printing system at boot time"
msgstr "Запуск системы печати во время загрузки"

#: printer/printerdrake.pm:4392
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine "
"is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a "
"higher security level, because the printing system is a potential point for "
"attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on "
"again?"
msgstr ""
"Система печати (%s) не будет автоматически запущена при загрузке машины.\n"
"\n"
"Возможно, что автоматический запуск был отключен из-за перехода на более "
"высокий уровень безопасности, потому что система печати является "
"потенциальной целью для атак.\n"
"\n"
"Желаете, чтобы автоматический запуск системы печати был снова включен?"

#: printer/printerdrake.pm:4415
#, c-format
msgid "Checking installed software..."
msgstr "Проверяется установленное программное обеспечение..."

#: printer/printerdrake.pm:4421
#, c-format
msgid "Removing %s..."
msgstr "Удаляется %s ..."

#: printer/printerdrake.pm:4425
#, c-format
msgid "Could not remove the %s printing system!"
msgstr "Не могу удалить систему печати %s !"

#: printer/printerdrake.pm:4449
#, c-format
msgid "Installing %s..."
msgstr "Устанавливается %s ..."

#: printer/printerdrake.pm:4453
#, c-format
msgid "Could not install the %s printing system!"
msgstr "Невозможно установить систему печати %s !"

#: printer/printerdrake.pm:4521
#, c-format
msgid ""
"In this mode there is no local printing system, all printing requests go "
"directly to the server specified below. Note that it is not possible to "
"define local print queues then and if the specified server is down it cannot "
"be printed at all from this machine."
msgstr ""
"В этом режиме нет локальной системы печати, все запросы на печать идут прямо "
"на указанный ниже сервер. Заметим, что в этом случае нет возможности "
"определить локальные запросы на печать и если указанный сервер не работает, "
"то они вообще не будут обработаны с этой машины."

#: printer/printerdrake.pm:4523
#, c-format
msgid ""
"Enter the host name or IP of your CUPS server and click OK if you want to "
"use this mode, click \"Quit\" otherwise."
msgstr ""
"Введите имя хоста или IP вашего сервера CUPS и нажмите OK если будете "
"использовать этот режим, иначе нажмите \"Выход\"."

#: printer/printerdrake.pm:4537
#, c-format
msgid "Name or IP of remote server:"
msgstr "Имя или IP удаленного сервера:"

#: printer/printerdrake.pm:4557
#, c-format
msgid "Setting Default Printer..."
msgstr "Устанавливается принтер по умолчанию..."

#: printer/printerdrake.pm:4577
#, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "Локальная система печати CUPS или удаленный сервер CUPS?"

#: printer/printerdrake.pm:4578
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr "Система печати CUPS может использоваться двумя способами:"

#: printer/printerdrake.pm:4580
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr "1. Система печати CUPS может работать локально. "

#: printer/printerdrake.pm:4581
#, c-format
msgid ""
"Then locally connected printers can be used and remote printers on other "
"CUPS servers in the same network are automatically discovered. "
msgstr ""
"Тогда можно использовать локально подключенные принтера, а принтера на "
"удаленных серверах CUPS в одной сети находятся автоматически. "

#: printer/printerdrake.pm:4582
#, c-format
msgid ""
"Disadvantage of this approach is, that more resources on the local machine "
"are needed: Additional software packages need to be installed, the CUPS "
"daemon has to run in the background and needs some memory, and the IPP port "
"(port 631) is opened. "
msgstr ""
"Неудобство в этом случае состоит в том, что требуется больше ресурсов "
"локальной машины: нужно устанавливать дополнительное программное "
"обеспечение, демон CUPS должен быть запущен в фоновом режиме и ему нужно "
"некоторое количество памяти, а также открывается IPP порт (631). "

#: printer/printerdrake.pm:4584
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""
"2. Все запросы на печать немедленно отправляются на удаленный сервер CUPS. "

#: printer/printerdrake.pm:4585
#, c-format
msgid ""
"Here local resource occupation is reduced to a minimum. No CUPS daemon is "
"started or port opened, no software infrastructure for setting up local "
"print queues is installed, so less memory and disk space is used. "
msgstr ""
"Здесь использование локальных ресурсов сведено к минимуму. Нет запущенного "
"демона CUPS и порт не открыт, не нужно устанавливать специального "
"программного обеспечения для локальных запросов на печать, поэтому "
"используется меньше памяти и дискового пространства. "

#: printer/printerdrake.pm:4586
#, c-format
msgid ""
"Disadvantage is that it is not possible to define local printers then and if "
"the specified server is down it cannot be printed at all from this machine. "
msgstr ""
"Недостаток состоит в том, что нет возможности определить локальные принтера "
"и если указанный сервер выключен, то печать с этой машины будет невозможна "
"вообще."

#: printer/printerdrake.pm:4588
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr "Как CUPS должен быть настроен на вашей машине?"

#: printer/printerdrake.pm:4592 printer/printerdrake.pm:4607
#: printer/printerdrake.pm:4611 printer/printerdrake.pm:4617
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr "Удаленный сервер, укажите имя или IP здесь:"

#: printer/printerdrake.pm:4606
#, c-format
msgid "Local CUPS printing system"
msgstr "Локальная система печати CUPS"

#: printer/printerdrake.pm:4645
#, c-format
msgid "Select Printer Spooler"
msgstr "Выберите спулер принтера"

#: printer/printerdrake.pm:4646
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "Какую систему печати (спулер) вы хотите использовать?"

#: printer/printerdrake.pm:4695
#, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "Настройка принтера \"%s\"завершилась неудачей!"

#: printer/printerdrake.pm:4710
#, c-format
msgid "Installing Foomatic..."
msgstr "Устанавливается Foomatic..."

#: printer/printerdrake.pm:4716
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr "Невозможно установить пакеты %s, %s не удастся запустить!"

#: printer/printerdrake.pm:4911
#, c-format
msgid ""
"The following printers are configured. Double-click on a printer to change "
"its settings; to make it the default printer; or to view information about "
"it. "
msgstr ""
"Настроены следующие принтеры. Дважды щелкните на принтере, чтобы изменить "
"его настройки; сделать его принтером по умолчанию; или просмотреть "
"информацию о нем."

#: printer/printerdrake.pm:4941
#, c-format
msgid "Display all available remote CUPS printers"
msgstr "Вывести все доступные удаленные принтеры CUPS"

#: printer/printerdrake.pm:4942
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
"Обновить список принтеров (отобразить все доступные удаленные принтеры CUPS)"

#: printer/printerdrake.pm:4953
#, c-format
msgid "CUPS configuration"
msgstr "Настройка CUPS"

#: printer/printerdrake.pm:4974
#, c-format
msgid "Change the printing system"
msgstr "Изменить систему печати"

#: printer/printerdrake.pm:4983
#, c-format
msgid "Normal Mode"
msgstr "Нормальный режим"

#: printer/printerdrake.pm:4984
#, c-format
msgid "Expert Mode"
msgstr "Режим эксперта"

#: printer/printerdrake.pm:5262 printer/printerdrake.pm:5318
#: printer/printerdrake.pm:5404 printer/printerdrake.pm:5413
#, c-format
msgid "Printer options"
msgstr "Параметры принтера"

#: printer/printerdrake.pm:5298
#, c-format
msgid "Modify printer configuration"
msgstr "Изменить конфигурацию принтера"

#: printer/printerdrake.pm:5300
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""
"Принтер %s%s\n"
"Хотите изменить этот принтер?"

#: printer/printerdrake.pm:5305
#, c-format
msgid "This printer is disabled"
msgstr "Данный принтер отключен"

#: printer/printerdrake.pm:5307
#, c-format
msgid "Do it!"
msgstr "Выполнить!"

#: printer/printerdrake.pm:5313 printer/printerdrake.pm:5378
#, c-format
msgid "Printer name, description, location"
msgstr "Имя принтера, описание, расположение"

#: printer/printerdrake.pm:5315 printer/printerdrake.pm:5397
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "Производитель принтера, модель, драйвер"

#: printer/printerdrake.pm:5316 printer/printerdrake.pm:5398
#, c-format
msgid "Printer manufacturer, model"
msgstr "Производитель принтера, модель"

#: printer/printerdrake.pm:5320 printer/printerdrake.pm:5408
#, c-format
msgid "Set this printer as the default"
msgstr "Сделать этот принтер используемым по умолчанию"

#: printer/printerdrake.pm:5325 printer/printerdrake.pm:5414
#: printer/printerdrake.pm:5416 printer/printerdrake.pm:5425
#, c-format
msgid "Enable Printer"
msgstr "Активировать принтер"

#: printer/printerdrake.pm:5328 printer/printerdrake.pm:5419
#: printer/printerdrake.pm:5420 printer/printerdrake.pm:5422
#, c-format
msgid "Disable Printer"
msgstr "Отключить принтер"

#: printer/printerdrake.pm:5332 printer/printerdrake.pm:5426
#, c-format
msgid "Printer communication error handling"
msgstr "Обработка ошибок подключения принтера"

#: printer/printerdrake.pm:5333 printer/printerdrake.pm:5430
#, c-format
msgid "Print test pages"
msgstr "Напечатать тестовые страницы..."

#: printer/printerdrake.pm:5334 printer/printerdrake.pm:5432
#, c-format
msgid "Learn how to use this printer"
msgstr "Изучить, как использовать этот принтер"

#: printer/printerdrake.pm:5335 printer/printerdrake.pm:5434
#, c-format
msgid "Remove printer"
msgstr "Удалить принтер"

#: printer/printerdrake.pm:5386
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "Удаляется старый принтер \"%s\"..."

#: printer/printerdrake.pm:5417
#, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "Принтер \"%s\" теперь активен."

#: printer/printerdrake.pm:5423
#, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "Принтер \"%s\" теперь отключен."

#: printer/printerdrake.pm:5465
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "Вы действительно хотите удалить принтер \"%s\"?"

#: printer/printerdrake.pm:5469
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "Удаляется принтер \"%s\"..."

#: printer/printerdrake.pm:5493
#, c-format
msgid "Default printer"
msgstr "Принтер по умолчанию"

#: printer/printerdrake.pm:5494
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "Принтер \"%s\" сделан теперь используемым по умолчанию."

#: raid.pm:41
#, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "Не могу добавить раздел на _отформатированный_ RAID  %s"

#: raid.pm:145
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "Недостаточно разделов для RAID уровня %d\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr "Не могу создать каталог /usr/share/sane/firmware!"

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr "Не могу создать линк /usr/share/sane/%s!"

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr "Невозможно скопировать файл firmware %s в /usr/share/sane/firmware!"

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr "Не могу установить права доступа для firmware файла %s!"

#: scanner.pm:200 standalone/scannerdrake:66 standalone/scannerdrake:70
#: standalone/scannerdrake:78 standalone/scannerdrake:346
#: standalone/scannerdrake:382 standalone/scannerdrake:446
#: standalone/scannerdrake:490 standalone/scannerdrake:494
#: standalone/scannerdrake:516 standalone/scannerdrake:581
#, c-format
msgid "Scannerdrake"
msgstr "Scannerdrake"

#: scanner.pm:201 standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr ""
"Не получается установить пакеты, необходимые для совместного использования "
"ваших сканеров."

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr "Ваш сканер не будет доступен для обычных пользователей."

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr "Прием/Отклонение сообщений об ошибках о фиктивных IPv4."

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr "Прием/Отклонение широковещательных эхо-запросов icmp."

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr "Прием/Отклонение эхо-запросов icmp."

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr "Разрешает/Запрещает автоматический вход в систему."

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""
"Если установлено в \"ВСЕ\", разрешено существовать файлам /etc/issue и /etc/"
"issue.net.\n"
"\n"
"Если установлено в \"НИ ОДНОГО\", не разрешено ни одного issue .\n"
"\n"
"В противном случае разрешен только /etc/issue."

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr "Разрешает/Запрещает перезагрузку пользователем из консоли."

#: security/help.pm:29
#, c-format
msgid "Allow/Forbid remote root login."
msgstr "Разрешает/Запрещает удаленный вход в систему под root'ом."

#: security/help.pm:31
#, c-format
msgid "Allow/Forbid direct root login."
msgstr "Разрешает/Запрещает непосредственный вход в систему под root'ом."

#: security/help.pm:33
#, c-format
msgid ""
"Allow/Forbid the list of users on the system on display managers (kdm and "
"gdm)."
msgstr ""
"Разрешает/Запрещает вывод списка пользователей системы в оконных менеджерах "
"(kdm и gdm)."

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""
"Разрешает/Запрещает экспорт дисплея при переходе из аккаунта root'а на "
"других пользователей.\n"
"\n"
"Подробнее смотрите в pam_xauth(8).'"

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""
"Разрешает/Запрещает X-подключения:\n"
"\n"
"- ВСЕ (все подключения разрешены),\n"
"\n"
"- ЛОКАЛЬНЫЕ (подключения только с локальной машины),\n"
"\n"
"- НИ ОДНОГО (никаких подключений)."

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""
"Аргумент определяет, будет ли разрешено клиентам из сети\n"
"подключаться к X-серверу на tcp-порт 6000 или нет."

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
"set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
"(5))."
msgstr ""
"Разрешает:\n"
"\n"
"- все службы, контролируемые tcp_wrappers'ами (см. hosts.deny(5) man page), "
"если установлено в \"ВСЕ\",\n"
"\n"
"- только локальные, если установлено в \"ЛОКАЛЬНЫЕ\"\n"
"\n"
"- ни одной, если установлено в \"НИ ОДНОГО\".\n"
"\n"
"Для разрешения нужных вам служб используйте /etc/hosts.allow (см hosts.allow "
"(5))."

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""
"Если значение SERVER_LEVEL (или SECURE_LEVEL, если отсутствует) \n"
"больше 3 в /etc/security/msec/security.conf, создает символическую \n"
"ссылку /etc/security/msec/server, указывающую \n"
"на /etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"Файл /etc/security/msec/server используется командой chkconfig --add \n"
"для принятия решения о добавлении службы, если она присутствует в \n"
"файле во время установки пакетов."

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""
"Включает/Отключает для пользователей службы crontab и at.\n"
"\n"
"Разрешенные пользователи помещаются в /etc/cron.allow и /etc/at.allow\n"
"(см. man at(1) и crontab(1))."

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr "Разрешает/Запрещает вывод отчетов syslog в консоль 12."

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""
"Включает/Отключает защиту от спуфинга при распознавании имен. \n"
"Если \"%s\" равно true, также регистрирует событие в syslog."

#: security/help.pm:80 standalone/draksec:215
#, c-format
msgid "Security Alerts:"
msgstr "Предупреждения о безопасности:"

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr "Включает/Отключает защиту от IP-спуфинга."

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr "Включает/Отключает libsafe, если в системе найдена libsafe."

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr "Включает/Отключает регистрацию необычных пакетов IPv4."

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr "Включает/Отключает проверку безопасности msec каждый час."

#: security/help.pm:90
#, c-format
msgid ""
" Enabling su only from members of the wheel group or allow su from any user."
msgstr ""
"Разрешает su только для членов группы wheel или разрешает su для любого "
"пользователя."

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr "Использование паролей для аутентификации пользователей."

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr "Включает/Отключает проверку режима promiscuity для ethernet-карт."

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr "Включает/Отключает ежедневную проверку безопасности."

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr "Включает/Отключает sulogin(8) в однопользовательском режиме."

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""
"Добавление имени в качестве исключения в управление возрастом паролей, "
"осуществляемого msec'ом."

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""
"Установка возраста пароля в \"max\" дней и задержку для изменения на "
"\"inactive\"."

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""
"Установка длительности истории пароля для предотвращения повторного "
"использования пароля."

#: security/help.pm:106
#, c-format
msgid ""
"Set the password minimum length and minimum number of digit and minimum "
"number of capitalized letters."
msgstr ""
"Установка минимальной длины пароля, минимального количества цифр и "
"минимального количества символов в верхнем регистре."

#: security/help.pm:108
#, c-format
msgid "Set the root umask."
msgstr "Установка значения umask для root'а."

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr "если установлено Да, проверяются открытые порты."

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""
"если установлено Да, проверяется:\n"
"\n"
"- наличие пустых паролей,\n"
"\n"
"- отсутствие пароля в /etc/shadow\n"
"\n"
"- наличие пользователей с UID 0 кроме root'а."

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""
"если установлено Да, проверяются права доступа файлов в домашних каталогах "
"пользователей."

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
"если установлено Да, проверяется, работают ли сетевые устройства в режиме "
"promiscuous."

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr "если установлено Да, ежедневно выполняются проверки безопасности."

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
"если установлено Да, проверяется добавление/удаление файлов с sgid-битами."

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr "если установлено Да, проверяется наличие пустых паролей в /etc/shadow."

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""
"если установлено Да, проверяется контрольная сумма файлов с битами suid/sgid."

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
"если установлено Да, проверяется добавление/удаление файлов root'а с suid-"
"битом."

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr "если установлено Да, создается отчет о файлах без владельца."

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
"если установлено Да, проверяются файлы/каталоги с возможностью записи кем-"
"угодно."

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr "если установлено Да, выполняются проверки chkrootkit."

#: security/help.pm:127
#, c-format
msgid ""
"if set, send the mail report to this email address else send it to root."
msgstr ""
"если установлено, письмо с отчетом отправляется на этот адрес, иначе "
"отправляется root'у."

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr "если установлено Да, результаты проверки отправляются по почте."

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""
"если установлено Да, сообщения не отправляются, если не о чем предупреждать."

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr "если установлено Да, выполняются некоторые проверки базы данных rpm."

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr "если установлено Да, результаты проверки регистрируются в syslog."

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr "если установлено Да, результаты проверки выводятся в tty."

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""
"Устанавливает размер истории команд командного процессора. Значение -1 "
"означает неограниченную историю."

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
"Устанавливает таймаут для командного процессора. Нулевое значение означает "
"отсутствие таймаута."

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr "Таймаут измеряется в секундах."

#: security/help.pm:138
#, c-format
msgid "Set the user umask."
msgstr "Установка значения umask для пользователя."

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr "Принимать сообщения об ошибках bogus IPv4."

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr "Принимать широковещательные icmp echo."

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr "Принимать icmp echo"

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr "Существование /etc/issue*"

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr "Перезагрузка консольным пользователем"

#: security/l10n.pm:17
#, c-format
msgid "Allow remote root login"
msgstr "Разрешает удаленный вход для root в систему."

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr "Вход сразу под root"

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr "Список пользователей в менеджерах экрана (kdm и gdm)"

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr "Экспортировать дисплей при переходе от root к другим пользователям"

#: security/l10n.pm:21
#, c-format
msgid "Allow X Window connections"
msgstr "Разрешать подключения X Window"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr "Разрешить TCP соединения X Window"

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr "Разрешить все службы, контролируемые tcp_wrappers'ами"

#: security/l10n.pm:24
#, c-format
msgid "Chkconfig obey msec rules"
msgstr "Chkconfig подчиняется правилам msec"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr "Разрешить \"crontab\" и \"at\" для пользователей"

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr "Syslog выводит сообщения в консоль 12"

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr "Защита от spoofing определения имени"

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr "Включить защиту от IP-спуфинга"

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr "Включить libsafe, если libsafe найдена в системе."

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr "Включить регистрацию необычных пакетов IPv4"

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr "Разрешить msec'у проверять безопасность каждый час"

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""
"Разрешить su только для членов группы wheel или разрешить su для любого "
"пользователя"

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr "Использовать пароль для аутентификации пользователей"

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr "Проверять режим promiscuity для ethernet-карт"

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr "Ежедневная проверка безопасности"

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr "Sulogin(8) в однопользовательском уровне"

#: security/l10n.pm:37
#, c-format
msgid "No password aging for"
msgstr "Нет возраста пароля для"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""
"Установить сроки действия паролей и длительности неактивности аккаунтов"

#: security/l10n.pm:39
#, c-format
msgid "Password history length"
msgstr "Длина истории пароля"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr "Минимальная длина пароля и количество цифр и букв в верхнем регистре"

#: security/l10n.pm:41
#, c-format
msgid "Root umask"
msgstr "Root umask"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr "Размер истории команд Shell"

#: security/l10n.pm:43
#, c-format
msgid "Shell timeout"
msgstr "Таймаут Shell"

#: security/l10n.pm:44
#, c-format
msgid "User umask"
msgstr "umask пользователя"

#: security/l10n.pm:45
#, c-format
msgid "Check open ports"
msgstr "Проверка открытых портов"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr "Проверка на небезопасные аккаунты"

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr "Проверка прав файлов в домашних каталогах пользователей"

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr "Проверяет, работают ли сетевые устройства в режиме promiscuous."

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr "Запускать ежедневные проверки безопасности."

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr "Проверка добавления/удаления бита sgid файлов."

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr "Проверять пустые пароли в /etc/shadow."

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr "Проверять контрольную сумму файлов suid/sgid."

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr "Проверка добавления/удаления битов suid root файлов."

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr "Сообщать о файлах без владельца"

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr "Проверка файлов/каталогов на запись для всех."

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr "Запускать проверки на chkrootkit."

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr "Не посылать писем без необходимости"

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
"Если установлено, отправляет письмо с отчетом на этот адрес, иначе "
"отправляет его root."

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr "Сообщать о результатах проверки по почте"

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr "Запускать некоторые проверки базы данных rpm."

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr "Выводить результаты проверки в syslog"

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr "Выводить результаты проверки на tty."

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "Добро пожаловать в Кракеры"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "Низкий"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "Высокий"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "Повышенный"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "Параноидальный"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"Этот уровень надо использовать с осторожностью. Он делает вашу систему "
"проще\n"
" в использовании, но и очень чувствительной: он не должен использоваться\n"
"на машинах, соединенных с другими или с Интернетом. Существует доступ без "
"пароля."

#: security/level.pm:44
#, c-format
msgid ""
"Passwords are now enabled, but use as a networked computer is still not "
"recommended."
msgstr ""
"Пароли теперь включены, но использование в качестве сетевого компьютера по-"
"прежнему не рекомендуется."

#: security/level.pm:45
#, c-format
msgid ""
"This is the standard security recommended for a computer that will be used "
"to connect to the Internet as a client."
msgstr ""
"Это стандартный уровень безопасности, рекомендуемый для компьютера,\n"
"который будет использоваться для подключения к Интернету в качестве клиента."

#: security/level.pm:46
#, c-format
msgid ""
"There are already some restrictions, and more automatic checks are run every "
"night."
msgstr ""
"Уже присутствует ряд ограничений и каждую ночь запускаются дополнительные "
"автоматические проверки."

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes "
"possible.\n"
"The security is now high enough to use the system as a server which can "
"accept\n"
"connections from many clients. Note: if your machine is only a client on the "
"Internet, you should choose a lower level."
msgstr ""
"На этом уровне безопасности становится возможным использование системы \n"
"в качестве сервера.\n"
"Зашита теперь достаточно высока для использования системы в качестве \n"
"сервера, который принимает подключения от многочисленных клиентов.\n"
"Помните: если ваша машина является только клиентом Интернета, вы должны \n"
"выбрать более низкий уровень."

#: security/level.pm:50
#, c-format
msgid ""
"This is similar to the previous level, but the system is entirely closed and "
"security features are at their maximum."
msgstr ""
"Этот уровень похож на предыдущий, но система полностью закрыта и параметры "
"безопасности установлены в их максимальные значения."

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "Основные параметры DrakSec"

#: security/level.pm:57
#, c-format
msgid "Please choose the desired security level"
msgstr "Пожалуйста, выберите желаемый уровень безопасности"

#: security/level.pm:61
#, c-format
msgid "Security level"
msgstr "Уровень безопасности"

#: security/level.pm:63
#, c-format
msgid "Use libsafe for servers"
msgstr "Использовать libsafe для серверов"

#: security/level.pm:64
#, c-format
msgid ""
"A library which defends against buffer overflow and format string attacks."
msgstr "Библиотека, защищающая от атак переполнения буфера и формата строки."

#: security/level.pm:65
#, c-format
msgid "Security Administrator (login or email)"
msgstr "Администратор безопасности (логин или email)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr ""
"Запустить звуковую систему ALSA (Расширенная звуковая архитектура Linux)"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "Anacron - планировщик команд, выполняющихся по расписанию."

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd используется для мониторинга состояния батарей и его регистрации\n"
"через syslog. Он также может быть использован для выключения машины при\n"
"сильном разряде батарей."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr ""
"Запускает команды, внесенные в расписание командой at во время, указанное\n"
"при запуске at, и запускает пакеты команд, когда средняя загрузка\n"
"достаточно низка."

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the "
"basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron является стандартной программой UNIX, которая по расписанию запускает\n"
"указанные пользователем программы. vixie cron добавляет ряд параметров к \n"
"базовому cron из UNIX, включая улучшенную безопасность и более мощные\n"
"параметры настройки."

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files "
"change.\n"
"It is used by GNOME and KDE"
msgstr ""
"FAM это демон слежения за файлами. Он используется для получения отчетов\n"
"об изменениях файлов.\n"
"Его используют GNOME и KDE"

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste "
"operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM добавляет поддержку мыши для приложений, работающих в текстовом режиме,\n"
"таких, как Midnight Commander. Он также позволяет использовать в консоли\n"
"операции вырезать-и-вставить при помощи мыши, и включает в консоли\n"
"поддержку всплывающих меню."

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake выполняет проверку аппаратного обеспечения и при необходимости\n"
"настраивает новое/изменившееся оборудование."

#: services.pm:35
#, c-format
msgid ""
"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr ""
"Apache является сервером всемирной паутины. Он используется для обслуживания "
"файлов HTML и CGI."

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for "
"starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
"disables\n"
"all of the services it is responsible for."
msgstr ""
"Демон internet superserver (зачастую называемый inetd) запускает по мере\n"
"необходимости множество других служб Интернета. Он отвечает за запуск\n"
"многих служб, включая telnet, ftp, rsh и rlogin. Отключение inetd\n"
"отключит также все службы, за которые он отвечает."

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"Запуск фильтрации пакетов для ядер Linux серии 2.2, чтобы установить\n"
"файервол для защиты своей машины от сетевых атак."

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"Этот пакет загружает выбранную раскладку клавиатуры, установленную в\n"
"/etc/sysconfig/keyboard. Она может быть выбрана при помощи утилиты\n"
"kbdconfig. Вы должны оставить это включенным для большинства машин."

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"Автоматическая регенерация заголовков ядра в /boot для\n"
"/usr/include/linux/{autoconf,version}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "Автоматическое обнаружение и настройка оборудования при загрузке."

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr ""
"Linuxconf будет иногда организовывать выполнение различных задач\n"
"во время загрузки для поддержки в рабочем состоянии конфигурации системы."

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd является демоном печати, который необходим для нормальной работы lpr. "
"Это\n"
"в основном сервер, распределяющий по принтерам задания на печать."

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr ""
"Виртуальный Сервер Linux, используется для создания высокопроизводительных\n"
"и широкодоступных серверов."

#: services.pm:54
#, c-format
msgid ""
"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
"names to IP addresses."
msgstr ""
"named (BIND) является сервером доменных имен (DNS), который используется для "
"преобразования имен хостов в IP-адреса."

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"Монтирует и размонтирует все точки монтирования сетевых\n"
"файловых систем(NFS), SMB (LanManager/Windows) и NCP (NetWare)."

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr ""
"Включает/Отключает все сетевые интерфейсы, настроенные на запуск\n"
"при загрузке."

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS - это распространенный протокол для общего доступа к файлам\n"
"через сети TCP/IP. Эта служба обеспечивает функциональные\n"
"возможности сервера NFS, настраиваемого при помощи файл /etc/exports."

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS - это распространенный протокол для общего доступа к файлам\n"
"через сети TCP/IP. Эта служба обеспечивает функциональные возможности\n"
"для блокирования файлов NFS."

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""
"Автоматическое включение при загрузке клавиши numlock\n"
"в консоли и Xorg."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "Поддержка win-принтеров OKI 4w и совместимых."

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe "
"to have\n"
"it installed on machines that do not need it."
msgstr ""
"Поддержка PCMCIA является обычной поддержкой устройств типа ethernet и\n"
"модемов в ноутбуках. Она не запустится до тех пор, пока не будет настроена,\n"
"поэтому ее безопасно устанавливать на машинах, для которых она не нужна."

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on "
"machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper управляет соединениями RPC, которые используются протоколами,\n"
"такими как NFS и NIS. Сервер portmap должен быть запущен на машинах,\n"
"которые работают как серверы для протоколов, осуществляющих использование\n"
"механизма RPC."

#: services.pm:73
#, c-format
msgid ""
"Postfix is a Mail Transport Agent, which is the program that moves mail from "
"one machine to another."
msgstr ""
"Postfix это Агент доставки почты, программа которая переправляет почту с "
"одной машины на другую."

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr ""
"Сохраняет и восстанавливает пул системной энтропии для повышения качества\n"
"генерации случайных чисел."

#: services.pm:76
#, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"Назначает raw-устройства block-устройствам (таким как разделы\n"
"жесткого диска) для использования такими приложениями, как Oracle или\n"
"DVD проигрыватели"

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"Демон routed разрешает автоматическое обновление таблиц IP-маршрутизации\n"
"через протокол RIP. В то время как RIP широко используется в небольших "
"сетях,\n"
"для сложных сетей необходимы более сложные протоколы маршрутизации."

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"Протокол rstat позволяет пользователям сети получать\n"
"данные о производительности любой машины в этой сети."

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"Протокол rusers позволяет пользователям сети определять, кто работает\n"
"на другой отвечающей машине."

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"Протокол rwho позволяет удаленным пользователям получать список всех\n"
"пользователей, работающих на машине с запущенным демоном rwho\n"
"(похож на finger)."

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "Запускает звуковую систему на вашей машине"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"Syslog - это функция, которая используется многими демонами для\n"
"регистрации сообщений в различных системных файлах логов. Неплохо было\n"
"бы всегда запускать syslog."

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "Загружает драйвера для ваших устройств USB."

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr "Запускает сервер шрифтов X (это обязательно для запуска Xorg)."

#: services.pm:115 services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr ""
"Выберите, какие службы должны быть автоматически запущены во время загрузки"

#: services.pm:127 standalone/draksambashare:111
#, c-format
msgid "Printing"
msgstr "Печать"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Интернет"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr "Общий доступ к файлам"

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr "Удаленное администрирование"

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr "Сервер базы данных"

#: services.pm:209
#, c-format
msgid "running"
msgstr "выполняется"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "остановлен"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr "Службы и демоны"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"Извините, дополнительная информация\n"
"об этой службе отсутствует."

#: services.pm:224 ugtk2.pm:1009
#, c-format
msgid "Info"
msgstr "Информация"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr "Запуск по запросу"

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "При загрузке"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "Запустить"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "Остановить"

#: share/advertising/01.pl:3
#, c-format
msgid "Mandriva Linux 2006: Packs"
msgstr "Mandriva Linux 2006: Пакеты"

#: share/advertising/02.pl:3
#, c-format
msgid "Mandriva Linux 2006: More features"
msgstr "Mandriva Linux 2006: Дополнительные возможности"

#: share/advertising/03.pl:3
#, c-format
msgid "Interactive firewall"
msgstr "Интерактивный файервол"

#: share/advertising/04.pl:3
#, c-format
msgid "Desktop search"
msgstr "Настольный поиск"

#: share/advertising/05.pl:3
#, c-format
msgid "New package manager"
msgstr "Новый менеджер пакетов"

#: share/advertising/06.pl:3
#, c-format
msgid "Mandriva Linux 2006: More performances"
msgstr "Mandriva Linux 2006: Дополнительная функциональность"

#: share/advertising/07.pl:3
#, c-format
msgid "Latest kernel and GCC"
msgstr "Самое последнее ядро и GCC"

#: share/advertising/08.pl:3
#, c-format
msgid "High Availibility"
msgstr "Высокая работосопсобность"

#: share/advertising/09.pl:3
#, c-format
msgid "Delta RPM"
msgstr "Delta RPM"

#: share/advertising/10.pl:3
#, c-format
msgid "Low resources setup"
msgstr "Настройка с минимумом ресурсов"

#: share/advertising/11.pl:3
#, c-format
msgid "Boot time reduction"
msgstr "Уменьшенное время загрузки"

#: share/advertising/12.pl:3
#, c-format
msgid "Mandriva Linux 2006: Easier to use"
msgstr "Mandriva Linux 2006: Проще в использовании"

#: share/advertising/13.pl:3
#, c-format
msgid "Latest graphical interfaces: KDE and GNOME"
msgstr "Самые последние графические интерфейсы: KDE и GNOME"

#: share/advertising/14.pl:3
#, c-format
msgid "auto-installation servers"
msgstr "серверы автоматической установки"

#: share/advertising/15.pl:3
#, c-format
msgid "Easy and quick installation"
msgstr "Простая и быстрая установка"

#: share/advertising/16.pl:3
#, c-format
msgid "Easy configuration thanks to 60 wizards"
msgstr "Простая настройка, благодаря 60 мастерам"

#: share/advertising/17.pl:3
#, c-format
msgid "Look and feel improved"
msgstr "Улучшены внешний вид и оформление"

#: share/advertising/18.pl:3
#, c-format
msgid "New webmin theme"
msgstr "Новая тема webmin"

#: share/advertising/19.pl:3
#, c-format
msgid "Mandriva Linux 2006: More support"
msgstr "Mandriva Linux 2006: Дополнительная поддержка"

#: share/advertising/20.pl:3
#, c-format
msgid "Better Hardware support"
msgstr "Улучшенная поддержка оборудования"

#: share/advertising/21.pl:3
#, c-format
msgid "Xen support"
msgstr "Поддержка Xen"

#: share/advertising/22.pl:3
#, c-format
msgid "Mandriva Linux 2006: More information"
msgstr "Mandriva Linux 2006: Дополнительная информация"

#: share/advertising/23.pl:3
#, c-format
msgid "Mandriva Linux 2006: Where to buy?"
msgstr "Mandriva Linux 2006: Где приобрести?"

#: share/advertising/24.pl:3
#, c-format
msgid "Where to find technical assistance?"
msgstr "Где найти помощь в технических вопросах?"

#: share/advertising/25.pl:3
#, c-format
msgid "How to join the Mandriva Linux community?"
msgstr "Как присоединиться к сообществу Mandriva Linux?"

#: share/advertising/26.pl:3
#, c-format
msgid "How to maintain your system up-to-date?"
msgstr "Как поддерживать свою систему в актуальном состоянии?"

#: share/advertising/intel.pl:3
#, c-format
msgid "Intel Software"
msgstr "Программное обеспечение от Intel"

#: share/advertising/skype.pl:3
#, c-format
msgid "Skype lets you make calls through the Internet for free."
msgstr "Skype позволяет вам осуществлять бесплатные звонки через Интернет."

#: share/compssUsers.pl:26
#, c-format
msgid "Office Workstation"
msgstr "Офисная рабочая станция"

#: share/compssUsers.pl:28
#, c-format
msgid ""
"Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets "
"(OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr ""
"Офисные программы: текстовые процессоры (OpenOffice.org Writer, Kword), "
"электронные таблицы (OpenOffice.org Calc, Kspread), просмотрщики pdf и т.д."

#: share/compssUsers.pl:29
#, c-format
msgid ""
"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
"gnumeric), pdf viewers, etc"
msgstr ""
"Офисные программы: текстовые процессоры (kword, abiword), электронные "
"таблицы (kspread, gnumeric), просмотрщики pdf и т.д."

#: share/compssUsers.pl:34
#, c-format
msgid "Game station"
msgstr "Игровая станция"

#: share/compssUsers.pl:35
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "Развлекательные программы: аркады, настольные игры, стратегии и т.д."

#: share/compssUsers.pl:38
#, c-format
msgid "Multimedia station"
msgstr "Мультимедиа станция"

#: share/compssUsers.pl:39
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "Программы для проигрывания/редактирования звука и видео"

#: share/compssUsers.pl:44
#, c-format
msgid "Internet station"
msgstr "Станция Интернет"

#: share/compssUsers.pl:45
#, c-format
msgid ""
"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
"Web"
msgstr ""
"Набор утилит для чтения и отправки почты и новостей (mutt, tin...) и веб-"
"серфинга"

#: share/compssUsers.pl:50
#, c-format
msgid "Network Computer (client)"
msgstr "Сетевой компьютер (клиент)"

#: share/compssUsers.pl:51
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "Клиенты для различных протоколов, включая ssh"

#: share/compssUsers.pl:55
#, c-format
msgid "Configuration"
msgstr "Настройка"

#: share/compssUsers.pl:56
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "Утилиты для облегчения настройки вашего компьютера"

#: share/compssUsers.pl:60
#, c-format
msgid "Console Tools"
msgstr "Утилиты для консоли"

#: share/compssUsers.pl:61
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "Редакторы, командные процессоры, файловые утилиты, терминалы"

#: share/compssUsers.pl:66 share/compssUsers.pl:170
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "Библиотеки разработки C и C++, программы и файлы include"

#: share/compssUsers.pl:70 share/compssUsers.pl:174
#, c-format
msgid "Documentation"
msgstr "Документация"

#: share/compssUsers.pl:71 share/compssUsers.pl:175
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "Книги и HowTo по Linux и свободном программном обеспечении"

#: share/compssUsers.pl:75 share/compssUsers.pl:178
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:76 share/compssUsers.pl:179
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "Стандартная база Linux. Поддержка приложений третьих разработчиков"

#: share/compssUsers.pl:86
#, c-format
msgid "Apache"
msgstr "Apache"

#: share/compssUsers.pl:89
#, c-format
msgid "Groupware"
msgstr "Groupware"

#: share/compssUsers.pl:90
#, c-format
msgid "Kolab Server"
msgstr "Сервер Kolab"

#: share/compssUsers.pl:93 share/compssUsers.pl:134
#, c-format
msgid "Firewall/Router"
msgstr "Файервол/Маршрутизатор"

#: share/compssUsers.pl:94 share/compssUsers.pl:135
#, c-format
msgid "Internet gateway"
msgstr "Интернет-шлюз"

#: share/compssUsers.pl:97
#, c-format
msgid "Mail/News"
msgstr "Почта/Новости"

#: share/compssUsers.pl:98
#, c-format
msgid "Postfix mail server, Inn news server"
msgstr "Почтовый сервер Postfix, сервер новостей Inn"

#: share/compssUsers.pl:101
#, c-format
msgid "Directory Server"
msgstr "Сервер каталогов"

#: share/compssUsers.pl:105
#, c-format
msgid "FTP Server"
msgstr "Сервер FTP"

#: share/compssUsers.pl:106
#, c-format
msgid "ProFTPd"
msgstr "ProFTPd"

#: share/compssUsers.pl:109
#, c-format
msgid "DNS/NIS"
msgstr "DNS/NIS"

#: share/compssUsers.pl:110
#, c-format
msgid "Domain Name and Network Information Server"
msgstr "Сервер доменных имен и сервер информации о сети"

#: share/compssUsers.pl:113
#, c-format
msgid "File and Printer Sharing Server"
msgstr "Сервер совместного доступа к файлам и принтерам"

#: share/compssUsers.pl:114
#, c-format
msgid "NFS Server, Samba server"
msgstr "Сервер NFS, сервер Samba"

#: share/compssUsers.pl:117 share/compssUsers.pl:130
#, c-format
msgid "Database"
msgstr "База данных"

#: share/compssUsers.pl:118
#, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "Сервер баз данных PostgreSQL и MySQL"

#: share/compssUsers.pl:122
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:123
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache, Pro-ftpd"

#: share/compssUsers.pl:126
#, c-format
msgid "Mail"
msgstr "Почта"

#: share/compssUsers.pl:127
#, c-format
msgid "Postfix mail server"
msgstr "Почтовый сервер Postfix"

#: share/compssUsers.pl:131
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "Сервер баз данных PostgreSQL или MySQL"

#: share/compssUsers.pl:138
#, c-format
msgid "Network Computer server"
msgstr "Сервер сети"

#: share/compssUsers.pl:139
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS-сервер, SMB-сервер, Proxy-сервер, ssh-сервер"

#: share/compssUsers.pl:147
#, c-format
msgid "KDE Workstation"
msgstr "Рабочая станция KDE"

#: share/compssUsers.pl:148
#, c-format
msgid ""
"The K Desktop Environment, the basic graphical environment with a collection "
"of accompanying tools"
msgstr ""
"K Desktop Environment - основная графическая среда с коллекцией "
"сопроводительных утилит"

#: share/compssUsers.pl:152
#, c-format
msgid "GNOME Workstation"
msgstr "Рабочая станция Gnome"

#: share/compssUsers.pl:153
#, c-format
msgid ""
"A graphical environment with user-friendly set of applications and desktop "
"tools"
msgstr ""
"Графическая среда с удобным для пользователя набором приложений и утилит "
"рабочего стола"

#: share/compssUsers.pl:156
#, c-format
msgid "IceWm Desktop"
msgstr "Рабочий стол IceWm"

#: share/compssUsers.pl:160
#, c-format
msgid "Other Graphical Desktops"
msgstr "Другие графические рабочие столы"

#: share/compssUsers.pl:161
#, c-format
msgid "Window Maker, Enlightenment, Fvwm, etc"
msgstr "Window Maker, Enlightenment, Fvwm, и т.д."

#: share/compssUsers.pl:184
#, c-format
msgid "Utilities"
msgstr "Утилиты"

#: share/compssUsers.pl:186 share/compssUsers.pl:187 standalone/logdrake:384
#, c-format
msgid "SSH Server"
msgstr "Сервер SSH"

#: share/compssUsers.pl:191
#, c-format
msgid "Webmin"
msgstr "Webmin"

#: share/compssUsers.pl:192
#, c-format
msgid "Webmin Remote Configuration Server"
msgstr "Сервер удаленной настройки Webmin"

#: share/compssUsers.pl:196
#, c-format
msgid "Network Utilities/Monitoring"
msgstr "Сетевые утилиты/Мониторинг"

#: share/compssUsers.pl:197
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr "Утилиты мониторинга, учет процессов, tcpdump, nmap, ..."

#: share/compssUsers.pl:201
#, c-format
msgid "Mandriva Wizards"
msgstr "Мастера настройки от Mandriva"

#: share/compssUsers.pl:202
#, c-format
msgid "Wizards to configure server"
msgstr "Мастера для настройки сервера"

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
"Эта программа является открытым программным обеспечением; вы можете\n"
"распространять ее дальше и/или изменять ее при условии соблюдения GNU\n"
"General Public License, опубликованной Free Software Foundation, 2-й\n"
"версии или любой другой (на ваше усмотрение) более поздней версии.\n"
"\n"
"Эта программа распространяется в надежде быть полезной, но БЕЗО ВСЯКОЙ\n"
"ГАРАНТИИ; даже без подразумеваемой гарантии РАБОТОСПОСОБНОСТИ или\n"
"ПРИГОДНОСТИ ДЛЯ ЛИЧНЫХ ЦЕЛЕЙ. Подробности смотрите в GNU General Public\n"
"License\n"
"\n"
"Вы должны были получить копию GNU General Public License вместе с этой\n"
"программой; если нет - напишите в Free Software Foundation, Inc.,\n"
"59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.\n"

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X "
"users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Приложение для резервирования и восстановления\n"
"\n"
"--default             : сохранить каталоги по умолчанию.\n"
"--debug               : показать все отладочные сообщения.\n"
"--show-conf           : перечислить резервируемые файлы или каталоги.\n"
"--config-info         : разъяснять параметры файла настройки (не "
"для                         пользователей Х).\n"
"--daemon              : использовать конфигурацию демона. \n"
"--help                : показать это сообщение.\n"
"--version             : показать номер версии.\n"

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""
"[--boot] [--splash]\n"
"ПАРАМЕТРЫ:\n"
"  --boot            - разрешить настройку начального загрузчика\n"
"  --splash          - разрешить настройку загрузочной темы\n"
"режим по умолчанию: предлагать настроить возможность автологина"

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of Mandriva Linux tools\n"
"  --incident        - program should be one of Mandriva Linux tools"
msgstr ""
"[ОПЦИИ] [ИМЯ_ПРОГРАММЫ]\n"
"\n"
"ОПЦИИ:\n"
"  --help            - вывести это справочное сообщение.\n"
"  --report          - программа должна быть из пакета утилит Mandriva Linux\n"
"  --incident        - программа должна быть из пакета утилит Mandriva Linux"

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""
"[--add]\n"
"  --add             - мастер \"добавления сетевого интерфейса\"\n"
"  --del             - мастер \"удаления сетевого интерфейса\"\n"
"  --skip-wizard     - управление соединениями\n"
"  --internet        - настройка интернет\n"
"  --wizard          - то же что и --add"

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""
"\n"
"Приложение для импорта и управления шрифтами\n"
"\n"
"ПАРАМЕТРЫ:\n"
"--windows_import : импортировать со всех доступных разделов windows.\n"
"--xls_fonts      : показать все уже существующие шрифты из xls\n"
"--install        : принять любой файл шрифтов и любой каталог.\n"
"--uninstall      : удалить любой шрифт или любой каталог шрифтов.\n"
"--replace        : заменить все шрифты, если уже существуют\n"
"--application    : 0 приложение отсутствует.\n"
"                 : 1 поддерживаются все доступные приложения.\n"
"                 : имя_приложения такое как so для staroffice \n"
"                 : и gs для ghostscript только для этого приложения."

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandriva Linux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires "
"username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, "
"nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, "
"IP, nbi image name)"
msgstr ""
"[ОПЦИИ]...\n"
"Конфигуратор Сервера терминалов Mandriva Linux\n"
"--enable         : включить MTS\n"
"--disable        : выключить MTS\n"
"--start          : запустить MTS\n"
"--stop           : остановить MTS\n"
"--adduser        : добавить существующего пользователя системы в MTS "
"(требуется имя пользователя)\n"
"--deluser        : удалить существующего пользователя системы из MTS "
"(требуется имя пользователя)\n"
"--addclient      : добавить клиентскую машину в MTS (требуется MAC-адрес, "
"IP, имя образа nbi)\n"
"--delclient      : удалить клиентскую машину из MTS (требуется MAC-адрес, "
"IP, имя образа nbi)"

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[клавиатура]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""
"[--file=мой_файл] [--word=мое_слово] [--explain=регулярное_выражение] [--"
"alert]"

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""
"[ОПЦИИ]\n"
"Приложения для подключения к сети и Интернету и их мониторинга\n"
"\n"
"--defaultintf interface : показать этот интерфейс по умолчанию\n"
"--connect : подключиться к Интернету, если еще не подключен\n"
"--disconnect : отключиться от Интернета, если уже подключен\n"
"--force : используется с (dis)connect : принудительно (от)соединиться.\n"
"--status : возвращает 1, если подключен, иначе 0, затем выходит.\n"
"--quiet : не быть интерактивным. Используется с (dis)connect."

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in Mandriva "
"Update mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the "
"description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""
"[ОПЦИЯ]...\n"
"  --no-confirmation      не просить первого подтверждения в режиме Mandriva "
"Update\n"
"  --no-verify-rpm        не проверять подписи пакетов\n"
"  --changelog-first      показывать журнал изменений перед списком файлов в "
"окне описания\n"
"  --merge-all-rpmnew     предлагать объединить все найденные файлы .rpmnew/."
"rpmsave"

#: standalone.pm:113
#, c-format
msgid ""
"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=dev]"
msgstr ""
"[--manual] [--device=устройство] [--update-sane=sane_source_dir] [--update-"
"usbtable] [--dynamic=устройство]"

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""
" [everything]\n"
"       XFdrake [--noauto] монитор\n"
"       разрешение XFdrake"

#: standalone.pm:146
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
"testing] [-v|--version] "
msgstr ""
"\n"
"Использование: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] "
"[--testing] [-v|--version] "

#: standalone/XFdrake:59
#, c-format
msgid "You need to reboot for changes to take effect"
msgstr "Вам нужно перезагрузиться чтобы изменения вступили в силу"

#: standalone/XFdrake:90
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "Пожалуйста, выйдите из системы, а затем используйте Ctrl-Alt-BackSpace"

#: standalone/XFdrake:94
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr "Вам нужно выйти и зайти снова чтобы изменения вступили в силу"

#: standalone/drakTermServ:102 standalone/drakTermServ:108
#, c-format
msgid "%s: %s requires a username...\n"
msgstr "%s: %s требует имя пользователя...\n"

#: standalone/drakTermServ:119
#, c-format
msgid ""
"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
"0/1 for Local Config...\n"
msgstr ""
"%s: %s требует hostname, MAC адрес, IP, nbi-image, 0/1 для THIN_CLIENT, 0/1 "
"для Local Config...\n"

#: standalone/drakTermServ:125
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr "%s: %s требует hostname...\n"

#: standalone/drakTermServ:207 standalone/drakTermServ:210
#, c-format
msgid "Terminal Server Configuration"
msgstr "Настройка сервера терминала"

#: standalone/drakTermServ:216
#, c-format
msgid "dhcpd Config"
msgstr "Настройка dhcpd"

#: standalone/drakTermServ:220
#, c-format
msgid "Enable Server"
msgstr "Включить сервер"

#: standalone/drakTermServ:226
#, c-format
msgid "Disable Server"
msgstr "Отключить сервер"

#: standalone/drakTermServ:232
#, c-format
msgid "Start Server"
msgstr "Запустить сервер"

#: standalone/drakTermServ:238
#, c-format
msgid "Stop Server"
msgstr "Остановить сервер"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "Сетевая загрузка с Floppy/ISO"

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr "Образы сетевых загрузочных дисков"

#: standalone/drakTermServ:258
#, c-format
msgid "Add/Del Users"
msgstr "Добавить/Удалить пользователя"

#: standalone/drakTermServ:262
#, c-format
msgid "Add/Del Clients"
msgstr "Добавить/Удалить клиентов"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "Образы"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr "Клиенты/Пользователи"

#: standalone/drakTermServ:289 standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "Мастер первого запуска"

#: standalone/drakTermServ:326 standalone/drakTermServ:327
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""
"%s определен как dm, добавляется gdm пользователь в /etc/passwd$$CLIENT$$"

#: standalone/drakTermServ:333
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all "
"nbis.                                                                \n"
"    b) Activate the "
"server.                                                          \n"
"    c) Start the "
"server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ "
"file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""
"\n"
" Данный мастер будет:\n"
" \t1) Просить вас выбрать 'тонкий' или 'толстый' клиент.\n"
"\t2) Настраивать DHCP.\n"
"\t\n"
"После выполнения этих шагов, мастер будет:\n"
"\t\n"
"    a) Делать все "
"nbis.                                                                \n"
"    b) Активировать "
"сервер.                                                          \n"
"    c) Запускать "
"сервер.                                                     \n"
"    d) Синхронизировать файлы shadow чтобы добавить всех пользователей, "
"включая root, \n"
"       в файл shadow$$CLIENT$"
"$.                                              \n"
"    e) Просить вас сделать загрузочный диск.\n"
"    f) Если это тонкий клиент, попросит вас перезагрузить KDM.\n"

#: standalone/drakTermServ:379
#, c-format
msgid "Cancel Wizard"
msgstr "Отменить Мастер"

#: standalone/drakTermServ:394
#, c-format
msgid "Please save dhcpd config!"
msgstr "Пожалуйста, сохраните config dhcpd!"

#: standalone/drakTermServ:422
#, c-format
msgid "Use thin clients."
msgstr "Использовать тонких клиентов."

#: standalone/drakTermServ:424
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr "Синхронизировать настройки X клавиатуры клиента с сервером."

#: standalone/drakTermServ:426
#, c-format
msgid ""
"Please select default client type (Fat is the default type if 'Use thin' is "
"unchecked).\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client "
"display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""
"Пожалуйста, выберите тип клиента по умолчанию (Толстые взяты по умолчанию, "
"если не выбрано Использовать тонкие).\n"
"    'Тонкие' клиенты запускают все с использованием CPU/RAM сервера, "
"используя клиентский дисплей.\n"
"    'Толстые' клиенты используют свои собственные CPU/RAM, но при этом "
"файловую систему от сервера."

#: standalone/drakTermServ:446
#, c-format
msgid "Creating net boot images for all kernels"
msgstr "Создание новых загрузочных образов для всех ядер"

#: standalone/drakTermServ:447 standalone/drakTermServ:769
#: standalone/drakTermServ:785
#, c-format
msgid "This will take a few minutes."
msgstr "Это займет несколько минут."

#: standalone/drakTermServ:453 standalone/drakTermServ:493
#, c-format
msgid "Done!"
msgstr "Готово!"

#: standalone/drakTermServ:464 standalone/drakTermServ:849
#, c-format
msgid "%s failed"
msgstr "%s завершено неудачно"

#: standalone/drakTermServ:473
#, c-format
msgid ""
"Not enough space to create\n"
"NBIs in %s.\n"
"Needed: %d MB, Free: %d MB"
msgstr ""
"Недостаточно места чтобы создать\n"
"NBI в %s.\n"
"Требуется: %d MB, Свободно: %d MB"

#: standalone/drakTermServ:479
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""
"Синхронизация списка пользователей сервера с клиентским списком, включая "
"пользователя root."

#: standalone/drakTermServ:499
#, c-format
msgid ""
"In order to enable changes made for thin clients, the display manager must "
"be restarted. Restart now?"
msgstr ""
"Чтобы изменения для этого тонкого клиента вступили в силу, нужно "
"перезапустить менеджер экрана. Сделать это сейчас?"

#: standalone/drakTermServ:534
#, c-format
msgid "Terminal Server Overview"
msgstr "Обзор Terminal Server"

#: standalone/drakTermServ:535
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must "
"be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a "
"graphical \n"
"        \tinterface to help manage/customize these images. To create the "
"file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
"include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least "
"one full kernel."
msgstr ""
"        - Создает загрузочные образы Etherboot Enabled:\n"
"        \t\tДля загрузки ядра через etherboot, должен быть создан "
"специальный образ kernel/initrd.\n"
"        \t\tmkinitrd-net делает основную часть работы, а drakTermServ это "
"просто графический интерфейс\n"
"        \t\tдля помощи в управлении/настройке таких образов. Для создания "
"файла\n"
"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include, который предназначен "
"для включения в\n"
"        \t\tdhcpd.conf, вам нужно создать образы etherboot хотя бы для "
"одного полноценного ядра."

#: standalone/drakTermServ:541
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, "
"assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps "
"create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct "
"image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it "
"expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks "
"like:"
msgstr ""
"        - Обслуживает /etc/dhcpd.conf:\n"
"        \t\tДля загрузки сетевых клиентов каждый клиент должен иметь запись "
"в dhcpd.conf, определяющую IP-адрес\n"
"        \t\tи сетевые загрузочные образы для машины. drakTermServ помогает "
"создавать/убирать такие записи.\n"
"\t\t\t\n"
"        \t\t(PCI карты могут обойтись без образа - etherboot пошлет запрос "
"на подходящий образ. Вам следует\n"
"        \t\tтакже знать, что когда etherboot ищет образы, он ожидает найти "
"имена типа\n"
"        \t\tboot-3c59x.nbi скорее, чем boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \t\tТипичная запись в dhcpd.conf для поддержки бездисковых клиентов "
"выглядит так:"

#: standalone/drakTermServ:559
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a "
"specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the "
"functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can "
"either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, "
"while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and "
"gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are "
"security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access "
"to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  "
"Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client "
"machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' "
"tools. This is enabled \n"
"        by creating separate config files associated with the client's IP "
"address and creating \n"
"        read/write mount points to allow the client to alter the file. Once "
"you are satisfied \n"
"        with the configuration, you can remove root login privileges from "
"the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing "
"clients."
msgstr ""
"\t\t\tВам скорее всего стоит использовать пул IP адресов, чем настраивать "
"отдельные записи для\n"
"\t\t\tклиентской машины, используя возможности фиксированной адресной схемы, "
"используя функциональность\n"
"\t\t\tфайлов специфической для клиента конфигурации, предоставляемой "
"ClusterNFS.\n"
"\t\t\t\n"
"\t\t\tЗаметка: Запись \"#type\" используется только в drakTermServ.  Клиент "
"может быть как 'тонким' так и\n"
"\t\t\t'толстым'.  Тонкие клиенты запускают большинство программ на сервере "
"при помощи XDMCP,а толстые запускают основную часть программ\n"
"\t\t\tна клиентской машине. Для тонких клиентов существует %s, \n"
"\t\t\tспециальный inittab. Системные config файлы xdm-config, kdmrc, и gdm."
"conf модифицируются\n"
"\t\t\tесли используется тонкий клиент для разрешения XDMCP. Так как "
"существуют некоторые проблемы с безопасностью при использовании\n"
"\t\t\tXDMCP, hosts.deny и hosts.allow изменяются для ограничения доступа "
"только для локальной\n"
"\t\t\tподсети.\n"
"\t\t\t\n"
"\t\t\tЗаметка: Запись \"#hdw_config\" также используется drakTermServ."
"Клиенты могут быть \n"
"\t\t\t'true' или 'false'.  'true' позволяет вход для root на клиентскую "
"машину и разрешает локальную\n"
"\t\t\tнастройку оборудования: звук, мышь и X при помощи утилит 'drak'.Это "
"разрешается\n"
"\t\t\tсозданием отдельных config файлов, сопоставленных с IP адресом клиента "
"и созданием \n"
"\t\t\tточек монтирования read/write, чтобы клиент мог изменять файл. Когда "
"вы удовлетворитесь\n"
"\t\t\tконфигурацией, вы можете убрать права входа под root на клиента.\n"
"\t\t\t\n"
"\t\t\tЗаметка: Вы должны остановить/запустить сервер после добавления или "
"изменения клиентов."

#: standalone/drakTermServ:579
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless "
"clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root "
"filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""
"        - Обслуживает /etc/exports:\n"
"        \t\tClusternfs позволяет экспортировать файловую систему root на "
"бездисковые клиенты. drakTermServ\n"
"        \t\tнастраивает правильную запись для разрешения анонимного доступа "
"в корневую файловую систему с\n"
"        \t\tбездискового клиента.\n"
"\n"
"        \t\tТипичная запись exports для clusternfs:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"\t\t\tГде SUBNET/MASK соответствует вашей сети."

#: standalone/drakTermServ:591
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless "
"client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this "
"file."
msgstr ""
"        - Обслуживает %s:\n"
"        \t\tЧтобы пользователи могли входить в систему с бездисковых "
"клиентов, их записи в\n"
"        \t\t/etc/shadow нужно сдублировать в %s. drakTermServ помогает\n"
"        \t\tв этом отношении добавляя или удаляя системных пользователей в "
"этом файле."

#: standalone/drakTermServ:595
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""
"        - Для каждого клиента %s:\n"
"        \t\tС clusternfs, каждый бездисковый клиент может иметь свои "
"собственные уникальные файлы конфигурации\n"
"        \t\tна корневой файловой системе сервера. Позволяя локальному "
"клиенту настройку конфигурации, \n"
"        \t\tdrakTermServ поможет создать такие файлы."

#: standalone/drakTermServ:600
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique "
"configuration files\n"
"        \ton the root filesystem of the server. By allowing local client "
"hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root "
"login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local "
"configuration can be\n"
"        turned back off, retaining the configuration files, once the client "
"machine is configured."
msgstr ""
"        - Для каждого клиента системные конфигурационные файлы:\n"
"         \t\tС clusternfs, каждый бездисковый клиент может иметь свои "
"собственные уникальные файлы конфигурации\n"
"        \t\tна корневой файловой системе сервера. Разрешая локальному "
"клиенту настройку конфигурации, \n"
"\t\t\t\tклиенты смогут настраивать файлы типа /etc/modules.conf, /etc/"
"sysconfig/mouse, \n"
"        \t\t/etc/sysconfig/keyboard каждый сам для себя.\n"
"\n"
"        Заметка: Разрешение настройки оборудования для локального клиента "
"включает вход под root на терминальный сервер на каждой из\n"
"        клиентских машин, на которой эта возможность включена. Локальная "
"настройка может быть обратно выключена\n"
"        сохраняя при этом конфигурационные файлы, как только клиентская "
"машина будет настроена."

#: standalone/drakTermServ:609
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with "
"the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
"the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the "
"disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where "
"mkinitrd-net\n"
"        \tputs its images."
msgstr ""
"        - /etc/xinetd.d/tftp:\n"
"        \t\tdrakTermServ настроит этот файл для работы в связке с образами "
"созданными\n"
"        \t\tmkinitrd-net, и записями в /etc/dhcpd.conf, для обслуживания "
"загрузочного образа к каждому\n"
"        \t\tбездисковому клиенту.\n"
"\n"
"        \t\tТипичный вид конфигурационного файла TFTP:\n"
"        \t\t\n"
"        \tservice tftp\n"
"        \t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \t\tОтличие здесь от инсталляции по умолчанию состоит в изменении "
"флага disable на\n"
"        \t\t'no' и изменении пути каталога на /var/lib/tftpboot, где "
"mkinitrd-net\n"
"        \t\tразмещает свои образы."

#: standalone/drakTermServ:630
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or "
"a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help "
"generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 "
"manually:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"
msgstr ""
"        - Создание дискет/CD для загрузки по сети:\n"
"        \tБездисковым клиентским машинам необходимы либо ROM-образы на NIC, "
"либо загрузочная дискета\n"
"        \tили CD для инициации загрузочной последовательности.  drakTermServ "
"поможет создать подобные\n"
"        \tобразы, основываясь на NIC в клиентской машине.\n"
"        \t\t\n"
"        \tБазовый пример создания загрузочной дискеты для 3Com 3c509 "
"вручную:\n"
"        \t\t\n"
"        \tcat /usr/share/etherboot/zdsk/3c509.zdsk > /dev/fd0"

#: standalone/drakTermServ:663
#, c-format
msgid "Boot Floppy"
msgstr "Загрузочная дискета"

#: standalone/drakTermServ:665
#, c-format
msgid "Boot ISO"
msgstr "Загрузочный ISO"

#: standalone/drakTermServ:667
#, c-format
msgid "PXE Image"
msgstr "PXE образ"

#: standalone/drakTermServ:728
#, c-format
msgid "Default kernel version"
msgstr "Версия ядра по умолчанию"

#: standalone/drakTermServ:731
#, c-format
msgid "Create PXE images."
msgstr "Создание образов PXE."

#: standalone/drakTermServ:757
#, c-format
msgid "Install i586 kernel for older clients"
msgstr "Установка i586 ядра для древних клиентов"

#: standalone/drakTermServ:767
#, c-format
msgid "Build Whole Kernel -->"
msgstr "Собрать все ядро -->"

#: standalone/drakTermServ:774
#, c-format
msgid "No kernel selected!"
msgstr "Ядро не выбрано!"

#: standalone/drakTermServ:777
#, c-format
msgid "Build Single NIC -->"
msgstr "Собрать единственный NIC -->"

#: standalone/drakTermServ:781 standalone/drakTermServ:1581
#, c-format
msgid "No NIC selected!"
msgstr "NIC не выбран!"

#: standalone/drakTermServ:784
#, c-format
msgid "Build All Kernels -->"
msgstr "Собрать все ядра -->"

#: standalone/drakTermServ:797
#, c-format
msgid "<-- Delete"
msgstr "<-- Удалить"

#: standalone/drakTermServ:802
#, c-format
msgid "No image selected!"
msgstr "Образ не выбран!"

#: standalone/drakTermServ:805
#, c-format
msgid "Delete All NBIs"
msgstr "Удалить все NBI"

#: standalone/drakTermServ:880
#, c-format
msgid "Building images for kernel:"
msgstr "Создание образов для ядра:"

#: standalone/drakTermServ:1004
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
"!!! Обнаружено, что пароль в базе данных системы отличается от\n"
" пароля в базе данных Terminal Server.\n"
"Удалите или снова добавьте пользователя в Terminal Server, чтобы "
"активировать учетную запись."

#: standalone/drakTermServ:1009
#, c-format
msgid "Add User -->"
msgstr "Добавить пользователя -->"

#: standalone/drakTermServ:1015
#, c-format
msgid "<-- Del User"
msgstr "<-- Удалить пользователя"

#: standalone/drakTermServ:1051
#, c-format
msgid "type: %s"
msgstr "тип: %s"

#: standalone/drakTermServ:1055
#, c-format
msgid "local config: %s"
msgstr "локальный config: %s"

#: standalone/drakTermServ:1086
#, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr ""
"Разрешить настройку\n"
"локального оборудования."

#: standalone/drakTermServ:1095
#, c-format
msgid "No net boot images created!"
msgstr "Образы сетевых загрузочных дисков не созданы!"

#: standalone/drakTermServ:1114
#, c-format
msgid "Thin Client"
msgstr "Тонкий Клиент (Thin)"

#: standalone/drakTermServ:1118
#, c-format
msgid "Allow Thin Clients"
msgstr "Разрешить тонких клиентов"

#: standalone/drakTermServ:1119
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""
"Синхронизация настроек клавиатуры клиента X \n"
"с сервером."

#: standalone/drakTermServ:1120
#, c-format
msgid "Add Client -->"
msgstr "Добавить клиента -->"

#: standalone/drakTermServ:1134
#, c-format
msgid "type: fat"
msgstr "тип: fat"

#: standalone/drakTermServ:1135
#, c-format
msgid "type: thin"
msgstr "тип: тонкий"

#: standalone/drakTermServ:1142
#, c-format
msgid "local config: false"
msgstr "локальный config: false"

#: standalone/drakTermServ:1143
#, c-format
msgid "local config: true"
msgstr "локальный config: true"

#: standalone/drakTermServ:1151
#, c-format
msgid "<-- Edit Client"
msgstr "<-- Редактировать клиента"

#: standalone/drakTermServ:1176
#, c-format
msgid "Disable Local Config"
msgstr "Отключить Local Config"

#: standalone/drakTermServ:1183
#, c-format
msgid "Delete Client"
msgstr "Удалить клиента"

#: standalone/drakTermServ:1205
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""
"Необходимо перезапустить менеджер экрана, чтобы изменения вступили в силу\n"
" (service dm restart - в консоли)."

#: standalone/drakTermServ:1250
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr "Тонкие клиенты не умеют работать с автологином. Отключить автологин?"

#: standalone/drakTermServ:1266
#, c-format
msgid "All clients will use %s"
msgstr "Все клиенты будут использовать %s"

#: standalone/drakTermServ:1300
#, c-format
msgid "Subnet:"
msgstr "Подсеть:"

#: standalone/drakTermServ:1307
#, c-format
msgid "Netmask:"
msgstr "Сетевая маска:"

#: standalone/drakTermServ:1314
#, c-format
msgid "Routers:"
msgstr "Маршрутизаторы:"

#: standalone/drakTermServ:1321
#, c-format
msgid "Subnet Mask:"
msgstr "Маска подсети:"

#: standalone/drakTermServ:1328
#, c-format
msgid "Broadcast Address:"
msgstr "Широковещательный адрес:"

#: standalone/drakTermServ:1335
#, c-format
msgid "Domain Name:"
msgstr "Имя домена:"

#: standalone/drakTermServ:1343
#, c-format
msgid "Name Servers:"
msgstr "Серверы имен:"

#: standalone/drakTermServ:1354
#, c-format
msgid "IP Range Start:"
msgstr "Начало диапазона IP:"

#: standalone/drakTermServ:1355
#, c-format
msgid "IP Range End:"
msgstr "Конец диапазона IP:"

#: standalone/drakTermServ:1397
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr "Добавить TS Includes в существующий Config"

#: standalone/drakTermServ:1399
#, c-format
msgid "Write Config"
msgstr "Записать настройку"

#: standalone/drakTermServ:1415
#, c-format
msgid "dhcpd Server Configuration"
msgstr "Настройка сервера DHCP"

#: standalone/drakTermServ:1416
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""
"Большинство этих значений было извлечено\n"
"из вашей работающей системы.\n"
"Вы можете изменить их на нужные."

#: standalone/drakTermServ:1419
#, c-format
msgid ""
"Dynamic IP Address Pool\n"
"(needed for PXE clients):"
msgstr ""
"Динамический пул IP-адресов\n"
"(требуется для PXE клиентов):"

#: standalone/drakTermServ:1572
#, c-format
msgid "Write to %s failed!"
msgstr "Запись на %s не получилась!"

#: standalone/drakTermServ:1585
#, c-format
msgid "Please insert floppy disk:"
msgstr "Пожалуйста, вставьте дискету:"

#: standalone/drakTermServ:1589
#, c-format
msgid "Could not access the floppy!"
msgstr "Невозможно получить доступ к дискете!"

#: standalone/drakTermServ:1591
#, c-format
msgid "Floppy can be removed now"
msgstr "Теперь дискета может быть извлечена"

#: standalone/drakTermServ:1594
#, c-format
msgid "No floppy drive available!"
msgstr "Не доступен ни один дисковод!"

#: standalone/drakTermServ:1600
#, c-format
msgid "PXE image is %s/%s"
msgstr "PXE образ это %s/%s"

#: standalone/drakTermServ:1602
#, c-format
msgid "Error writing %s/%s"
msgstr "Ошибка записи %s/%s"

#: standalone/drakTermServ:1614
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "Сетевой загрузочный ISO-образ - %s"

#: standalone/drakTermServ:1618
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "Что-то пошло не так! - Установлена ли mkisofs?"

#: standalone/drakTermServ:1638
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "Сначала необходимо создать /etc/dhcpd.conf"

#: standalone/drakTermServ:1797
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr "%s passwd плох в Terminal Server - перезаписывается...\n"

#: standalone/drakTermServ:1810
#, c-format
msgid "%s is not a user..\n"
msgstr "%s это не пользователь..\n"

#: standalone/drakTermServ:1811
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr "%s уже является пользователем Terminal Server\n"

#: standalone/drakTermServ:1813
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr "Добавление %s в Terminal Server не удалось!\n"

#: standalone/drakTermServ:1815
#, c-format
msgid "%s added to Terminal Server\n"
msgstr "%s добавлен в Terminal Server\n"

#: standalone/drakTermServ:1832
#, c-format
msgid "Deleted %s...\n"
msgstr "Удален %s...\n"

#: standalone/drakTermServ:1834 standalone/drakTermServ:1907
#, c-format
msgid "%s not found...\n"
msgstr "%s не найден...\n"

#: standalone/drakTermServ:1935
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr "/etc/hosts.allow и /etc/hosts.deny уже настроены - не изменены"

#: standalone/drakTermServ:2075
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr "Конфигурация изменена - перезапустить clusternfs/dhcpd?"

#: standalone/drakautoinst:38 standalone/drakhosts:123
#: standalone/drakhosts:129 standalone/draknfs:84 standalone/draknfs:105
#: standalone/draknfs:444 standalone/draknfs:447 standalone/draknfs:539
#: standalone/draknfs:546 standalone/draksambashare:187
#: standalone/draksambashare:208 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Error!"
msgstr "Ошибка!"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr "Не могу найти необходимый файл образа `%s'."

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "Конфигуратор автоматической установки"

#: standalone/drakautoinst:42
#, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat "
"dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've "
"performed on this computer, being interactively prompted for some steps, in "
"order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed "
"automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""
"Вы собираетесь настроить дискету автоматической установки. Эта возможность "
"немного опасна и должна быть использована с осторожностью.\n"
"\n"
"Используя эту возможность, вы сможете повторить установку, выполненную на "
"этом компьютере. На некоторых этапах в интерактивном режиме вам будет "
"предложено изменить значения.\n"
"\n"
"Для максимальной безопасности, разбиение дисков и форматирование не будет "
"производиться автоматически, независимо от того, что вы выбрали при "
"установке на данный компьютер.\n"
"\n"
"Нажмите OK для продолжения."

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "повторить"

#: standalone/drakautoinst:60 standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr "вручную"

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "Автоматическая настройка этапов"

#: standalone/drakautoinst:65
#, c-format
msgid ""
"Please choose for each step whether it will replay like your install, or it "
"will be manual"
msgstr ""
"Пожалуйста, выберите для каждого этапа, будет ли он выполнен как во время "
"установки или он будет выполнен вручную"

#: standalone/drakautoinst:77 standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "Создание дискеты автоматической установки"

#: standalone/drakautoinst:90
#, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "Вставьте другую чистую дискету в дисковод %s (для диска драйверов)"

#: standalone/drakautoinst:91
#, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "Создание дискеты автоматической установки (диск драйверов)"

#: standalone/drakautoinst:156
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"Добро пожаловать.\n"
"\n"
"Параметры автоматической установки доступны в разделах слева"

#: standalone/drakautoinst:251
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"Дискета была успешно создана.\n"
"теперь вы можете повторить свою установку."

#: standalone/drakautoinst:287
#, c-format
msgid "Auto Install"
msgstr "Автоматическая установка"

#: standalone/drakautoinst:356
#, c-format
msgid "Add an item"
msgstr "Добавить пункт"

#: standalone/drakautoinst:363
#, c-format
msgid "Remove the last item"
msgstr "Удалить последний пункт"

#: standalone/drakbackup:156
#, c-format
msgid ""
"Expect is an extension to the TCL scripting language that allows interactive "
"sessions without user intervention."
msgstr ""
"Ожидаемое является расширением скриптового языка Tcl, который позволяет "
"проводить интерактивные сеансы без вмешательства пользователя."

#: standalone/drakbackup:157
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr "Хранить пароль для этой системы в конфигурации drakbackup."

#: standalone/drakbackup:158
#, c-format
msgid ""
"For a multisession CD, only the first session will erase the cdrw. Otherwise "
"the cdrw is erased before each backup."
msgstr ""
"Для многосеансных CD, только первый сеанс будет очищать cdrw. Иначе cdrw "
"очищается перед каждым созданием резервной копии."

#: standalone/drakbackup:159
#, c-format
msgid ""
"This option will save files that have changed.  Exact behavior depends on "
"whether incremental or differential mode is used."
msgstr ""
"Эта опция будет сохранять измененные файлы.  Правильное поведение зависит от "
"того, какой режим выбран, нарастающий или дифференциальный."

#: standalone/drakbackup:160
#, c-format
msgid ""
"Incremental backups only save files that have changed or are new since the "
"last backup."
msgstr ""
"Нарастающие резервирования сохраняют только файлы, которые изменились или "
"являются новыми с момента создания прошлой резервной копии."

#: standalone/drakbackup:161
#, c-format
msgid ""
"Differential backups only save files that have changed or are new since the "
"original 'base' backup."
msgstr ""
"Дифференциальное резервирование сохраняет только те файлы, которые "
"изменились или являются новыми для оригинальной 'базовой' резервной копии. "

#: standalone/drakbackup:162
#, c-format
msgid ""
"Star should be selected if you want to backup EA or ACLs, otherwise choose "
"tar"
msgstr ""

#: standalone/drakbackup:163
#, fuzzy, c-format
msgid ""
"This should be a local user or email address that you want the backup "
"results sent to. You will need to define a functioning mail server. Multiple "
"users can be in a comma seperated list"
msgstr ""
"Это должен быть локальный пользователь или email адрес, куда нужно отсылать "
"отчет о создании резервной копии. Вам прийдется указать функционирующий "
"почтовый сервер."

#: standalone/drakbackup:164
#, c-format
msgid ""
"This should be the return address that you want the backup results sent "
"from. Default is drakbackup."
msgstr ""
"Это должен быть обратный адрес, откуда будет послан отчет о создании "
"резервной копии. По умолчанию это drakbackup."

#: standalone/drakbackup:165
#, c-format
msgid ""
"Files or wildcards listed in a .backupignore file at the top of a directory "
"tree will not be backed up."
msgstr ""
"Файлы или wildcards, приведенные в файле .backupignore в верхней части "
"дерева каталогов, не будут сохраняться в резервных копиях."

#: standalone/drakbackup:166
#, c-format
msgid ""
"For backups to other media, files are still created on the hard drive, then "
"moved to the other media.  Enabling this option will remove the hard drive "
"tar files after the backup."
msgstr ""
"При создании резервных копий на другой носитель, файлы сначала создаются на "
"жестком диске, затем переносятся на нужный носитель. Включение этой опции "
"позволит удалять tar файлы с жесткого диска после создания резервных копий."

#: standalone/drakbackup:167
#, c-format
msgid ""
"Selecting this option allows you to view the raw output from the restore "
"process, after a file restore."
msgstr ""

#: standalone/drakbackup:168
#, c-format
msgid ""
"Some protocols, like rsync, may be configured at the server end.  Rather "
"than using a directory path, you would use the 'module' name for the service "
"path."
msgstr ""
"Некоторые протоколы, например rsync, могут настраиваться на стороне сервера. "
"Вместо пути к каталогу лучше использовать имя 'module' для пути службы."

#: standalone/drakbackup:169
#, c-format
msgid ""
"Custom allows you to specify your own day and time.  The other options use "
"run-parts in /etc/crontab."
msgstr ""
"Выборочно позволяет вам указать свои дату и время.  Другие опции используют "
"run-parts в /etc/crontab."

#: standalone/drakbackup:343
#, c-format
msgid "No media selected for cron operation."
msgstr "Не выбран носитель для операций cron."

#: standalone/drakbackup:347
#, c-format
msgid "No interval selected for cron operation."
msgstr "Не задан интервал для cron операций."

#: standalone/drakbackup:393
#, c-format
msgid "Interval cron not available as non-root"
msgstr "Интервал cron недоступен без прав root"

#: standalone/drakbackup:477 standalone/logdrake:440
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""
"\"%s\" не является нормальным email-адресом либо существующим локальным "
"пользователем!"

#: standalone/drakbackup:481 standalone/logdrake:445
#, c-format
msgid ""
"\"%s\" is a local user, but you did not select a local smtp, so you must use "
"a complete email address!"
msgstr ""
"\"%s\" это конечно локальный пользователь, но вы не выбрали локальный smtp, "
"поэтому вам прийдется использовать полный email адрес!"

#: standalone/drakbackup:491
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""
"Изменен действительный пользовательский список, перезаписывается config файл."

#: standalone/drakbackup:493
#, c-format
msgid "Old user list:\n"
msgstr "Старый пользовательский список:\n"

#: standalone/drakbackup:495
#, c-format
msgid "New user list:\n"
msgstr "Новый пользовательский список:\n"

#: standalone/drakbackup:524
#, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      Отчет DrakBackup \n"

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      Отчет демона DrakBackup\n"

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    Подробный отчет DrakBackup\n"
"\n"
"\n"

#: standalone/drakbackup:556 standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr "Общий прогресс"

#: standalone/drakbackup:609
#, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s существует, удалить?\n"
"\n"
"Если вы уже выполнили этот процесс, вам возможно,\n"
"понадобится удалить ненужные пункты из authorized_keys\n"
"на сервере."

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "Генерация ключей может занять некоторое время."

#: standalone/drakbackup:625
#, c-format
msgid "Cannot spawn %s."
msgstr "Невозможно породить подпроцесс %s."

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "Отсутствует запрос пароля для %s на порту %s"

#: standalone/drakbackup:643
#, c-format
msgid "Bad password on %s"
msgstr "Плохой пароль для %s"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "Запрещен доступ для передачи %s на %s"

#: standalone/drakbackup:645
#, c-format
msgid "Can not find %s on %s"
msgstr "Невозможно найти %s на %s"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr "%s не отвечает"

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"Передача завершена\n"
"Если вы желаете проверить, зайдите на сервер, используя:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"без запроса пароля."

#: standalone/drakbackup:703
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "В приводе отсутствует CDR/DVDR!"

#: standalone/drakbackup:707
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "Похоже, что это не перезаписываемый носитель!"

#: standalone/drakbackup:712
#, c-format
msgid "Not erasable media!"
msgstr "Отсутствует носитель для стирания!"

#: standalone/drakbackup:754
#, c-format
msgid "This may take a moment to erase the media."
msgstr "Стирание носителя может занять некоторое время."

#: standalone/drakbackup:812
#, c-format
msgid "Permission problem accessing CD."
msgstr "Проблема с правами доступа к компакт-диску."

#: standalone/drakbackup:839
#, c-format
msgid "No tape in %s!"
msgstr "В %s отсутствует лента!"

#: standalone/drakbackup:948
#, c-format
msgid ""
"Backup destination quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""
"Превышена квота на размер резервной копии для места назначения!\n"
"%d MB использовано, когда %d MB выделено."

#: standalone/drakbackup:968 standalone/drakbackup:1000
#, c-format
msgid "Backup system files..."
msgstr "Резервируются системные файлы..."

#: standalone/drakbackup:1001 standalone/drakbackup:1040
#, c-format
msgid "Hard Disk Backup files..."
msgstr "Резервируются файлы жесткого диска... "

#: standalone/drakbackup:1039
#, c-format
msgid "Backup User files..."
msgstr "Резервируются файлы пользователя..."

#: standalone/drakbackup:1073
#, c-format
msgid "Backup Other files..."
msgstr "Резервируются другие файлы..."

#: standalone/drakbackup:1074
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "Резервируется жесткий диск..."

#: standalone/drakbackup:1079
#, c-format
msgid "No changes to backup!"
msgstr "Отсутствуют изменения для резервирования!"

#: standalone/drakbackup:1095 standalone/drakbackup:1117
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup выполняется на %s:\n"
"\n"

#: standalone/drakbackup:1104
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by "
"FTP.\n"
msgstr ""
"\n"
" Проблема FTP-соединения: ваши резервные файлы невозможно отправить по FTP.\n"

#: standalone/drakbackup:1105
#, c-format
msgid ""
"Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""
"Ошибка при отправке файла по FTP. Пожалуйста, исправьте свою настройку FTP."

#: standalone/drakbackup:1107
#, c-format
msgid "file list sent by FTP: %s\n"
msgstr "список файлов отправлен по FTP: %s\n"

#: standalone/drakbackup:1122
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup выполняется на компакт-диске:\n"
"\n"

#: standalone/drakbackup:1127
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup выполняется на ленте:\n"
"\n"

#: standalone/drakbackup:1136
#, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""
"Ошибка при попытке отправить письмо. Ваше письмо с отчетом не было "
"отправлено."

#: standalone/drakbackup:1137
#, c-format
msgid " Error while sending mail. \n"
msgstr "Ошибка при отправке письма. \n"

#: standalone/drakbackup:1167
#, c-format
msgid "Can not create catalog!"
msgstr "Невозможно создать каталог!"

#: standalone/drakbackup:1321
#, fuzzy, c-format
msgid "Problem installing %s"
msgstr "Проблемы при установке пакета %s"

#: standalone/drakbackup:1409
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "Создать резервные копии системных файлов (каталог /etc)."

#: standalone/drakbackup:1410 standalone/drakbackup:1473
#: standalone/drakbackup:1539
#, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr ""
"Создавать нарастающие/дифференциальные резервные копии (не заменять старые "
"резервные копии)"

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Incremental Backups"
msgstr "Использовать нарастающее резервирование"

#: standalone/drakbackup:1412 standalone/drakbackup:1475
#: standalone/drakbackup:1541
#, c-format
msgid "Use Differential Backups"
msgstr "Использовать дифференциальное резервирование"

#: standalone/drakbackup:1414
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "Не включать важные файлы (passwd, group, fstab)"

#: standalone/drakbackup:1445
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr ""
"Пожалуйста, отметьте всех пользователей, которых вы хотите включить в свою "
"резервную копию."

#: standalone/drakbackup:1472
#, c-format
msgid "Do not include the browser cache"
msgstr "Не включать кэш браузера"

#: standalone/drakbackup:1526
#, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "Выберите файлы или каталоги и нажмите 'OK'"

#: standalone/drakbackup:1527 standalone/drakfont:658
#, c-format
msgid "Remove Selected"
msgstr "Удалить выбранные"

#: standalone/drakbackup:1590
#, c-format
msgid "Users"
msgstr "Пользователи"

#: standalone/drakbackup:1610
#, c-format
msgid "Use network connection to backup"
msgstr "Использовать сетевое соединение для резервирования"

#: standalone/drakbackup:1612
#, c-format
msgid "Net Method:"
msgstr "Сетевой метод:"

#: standalone/drakbackup:1616
#, c-format
msgid "Use Expect for SSH"
msgstr "Использовать Expect для SSH"

#: standalone/drakbackup:1617
#, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr "Создать/Перенести резервные ключи для SSH"

#: standalone/drakbackup:1619
#, c-format
msgid "Transfer Now"
msgstr "Перенести сейчас"

#: standalone/drakbackup:1621
#, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr "Другие (не drakbackup) ключи уже на месте"

#: standalone/drakbackup:1624
#, c-format
msgid "Host name or IP."
msgstr "Имя хоста или IP."

#: standalone/drakbackup:1629
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr "Каталог (или модуль) для размещения резервной копии на этом хосте."

#: standalone/drakbackup:1641
#, c-format
msgid "Remember this password"
msgstr "Запомнить этот пароль"

#: standalone/drakbackup:1653
#, c-format
msgid "Need hostname, username and password!"
msgstr "Нужны имя хоста, имя пользователя и пароль!"

#: standalone/drakbackup:1744
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "Использовать для резервирования CD-R/DVD-R"

#: standalone/drakbackup:1747
#, c-format
msgid "Choose your CD/DVD device"
msgstr "Выберите устройство CD/DVD"

#: standalone/drakbackup:1752
#, c-format
msgid "Choose your CD/DVD media size"
msgstr "Выберите объем носителя CD/DVD"

#: standalone/drakbackup:1759
#, c-format
msgid "Multisession CD"
msgstr "Многоссионный CD"

#: standalone/drakbackup:1761
#, c-format
msgid "CDRW media"
msgstr "Носитель CDRW"

#: standalone/drakbackup:1767
#, c-format
msgid "Erase your RW media (1st Session)"
msgstr "Очистить RW-носитель (1-ая сессия)"

#: standalone/drakbackup:1768
#, c-format
msgid " Erase Now "
msgstr " Стереть немедленно "

#: standalone/drakbackup:1774
#, c-format
msgid "DVD+RW media"
msgstr "Носитель DVD+RW"

#: standalone/drakbackup:1776
#, c-format
msgid "DVD-R media"
msgstr "Носитель DVD-R"

#: standalone/drakbackup:1778
#, c-format
msgid "DVDRAM device"
msgstr "Устройство DVDRAM"

#: standalone/drakbackup:1809
#, c-format
msgid "No CD device defined!"
msgstr "Устройство CD не выбрано!"

#: standalone/drakbackup:1851
#, c-format
msgid "Use tape to backup"
msgstr "Использовать для резервирования магнитную ленту"

#: standalone/drakbackup:1854
#, c-format
msgid "Device name to use for backup"
msgstr "Имя устройства для создания резервных копий"

#: standalone/drakbackup:1860
#, c-format
msgid "Backup directly to tape"
msgstr "Сделать резервную копию прямо на ленту"

#: standalone/drakbackup:1866
#, c-format
msgid "Use tape hardware compression (EXPERIMENTAL)"
msgstr "Использовать сжатие ленточного оборудования (ЭКСПЕРИМЕНТАЛЬНО)"

#: standalone/drakbackup:1872
#, c-format
msgid "Do not rewind tape after backup"
msgstr "Не перематывать ленту после создания резервной копии"

#: standalone/drakbackup:1878
#, c-format
msgid "Erase tape before backup"
msgstr "Очистить ленту перед созданием резервной копии"

#: standalone/drakbackup:1884
#, c-format
msgid "Eject tape after the backup"
msgstr "Извлечь ленту после создания резервной копии"

#: standalone/drakbackup:1965
#, c-format
msgid "Enter the directory to save to:"
msgstr "Введите каталог для сохранения:"

#: standalone/drakbackup:1969
#, c-format
msgid "Directory to save to"
msgstr "Каталог для сохранения"

#: standalone/drakbackup:1974
#, c-format
msgid ""
"Maximum disk space\n"
" allocated for backups (MB)"
msgstr ""
"Максимальный размер диска\n"
" выделенный для резервирования (MB)"

#: standalone/drakbackup:1978
#, c-format
msgid ""
"Delete incremental or differential\n"
" backups older than N days\n"
" (0 is keep all backups) to save space"
msgstr ""
"Удалять нарастающие или раздельные резервные копии старше N дней\n"
" (0 оставлять все копии) для экономии места"

#: standalone/drakbackup:2045
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2050
#, c-format
msgid "HardDrive / NFS"
msgstr "Жесткий диск / NFS"

#: standalone/drakbackup:2065 standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "hourly"
msgstr "каждый час"

#: standalone/drakbackup:2065 standalone/drakbackup:2067
#: standalone/drakbackup:2072
#, c-format
msgid "daily"
msgstr "каждый день"

#: standalone/drakbackup:2065 standalone/drakbackup:2068
#: standalone/drakbackup:2073
#, c-format
msgid "weekly"
msgstr "каждую неделю"

#: standalone/drakbackup:2065 standalone/drakbackup:2069
#: standalone/drakbackup:2074
#, c-format
msgid "monthly"
msgstr "каждый месяц"

#: standalone/drakbackup:2065 standalone/drakbackup:2070
#: standalone/drakbackup:2075
#, c-format
msgid "custom"
msgstr "выборочно"

#: standalone/drakbackup:2079
#, c-format
msgid "January"
msgstr "Январь"

#: standalone/drakbackup:2079
#, c-format
msgid "February"
msgstr "Февраль"

#: standalone/drakbackup:2079
#, c-format
msgid "March"
msgstr "Март"

#: standalone/drakbackup:2080
#, c-format
msgid "April"
msgstr "Апрель"

#: standalone/drakbackup:2080
#, c-format
msgid "May"
msgstr "Май"

#: standalone/drakbackup:2080
#, c-format
msgid "June"
msgstr "Июнь"

#: standalone/drakbackup:2080
#, c-format
msgid "July"
msgstr "Июль"

#: standalone/drakbackup:2080
#, c-format
msgid "August"
msgstr "Август"

#: standalone/drakbackup:2080
#, c-format
msgid "September"
msgstr "Сентябрь"

#: standalone/drakbackup:2081
#, c-format
msgid "October"
msgstr "Октябрь"

#: standalone/drakbackup:2081
#, c-format
msgid "November"
msgstr "Ноябрь"

#: standalone/drakbackup:2081
#, c-format
msgid "December"
msgstr "Декабрь"

#: standalone/drakbackup:2084
#, c-format
msgid "Sunday"
msgstr "Воскресенье"

#: standalone/drakbackup:2084
#, c-format
msgid "Monday"
msgstr "Понедельник"

#: standalone/drakbackup:2084
#, c-format
msgid "Tuesday"
msgstr "Вторник"

#: standalone/drakbackup:2085
#, c-format
msgid "Wednesday"
msgstr "Среда"

#: standalone/drakbackup:2085
#, c-format
msgid "Thursday"
msgstr "Четверг"

#: standalone/drakbackup:2085
#, c-format
msgid "Friday"
msgstr "Пятница"

#: standalone/drakbackup:2085
#, c-format
msgid "Saturday"
msgstr "Суббота"

#: standalone/drakbackup:2115
#, fuzzy, c-format
msgid "Delete cron entry"
msgstr "Удалить клиента"

#: standalone/drakbackup:2116
#, fuzzy, c-format
msgid "Add cron entry"
msgstr "Добавить принтер"

#: standalone/drakbackup:2174
#, c-format
msgid "Use daemon"
msgstr "Использовать демон"

#: standalone/drakbackup:2178
#, c-format
msgid "Please choose the time interval between each backup"
msgstr "Пожалуйста, выберите промежуток времени между резервированиями"

#: standalone/drakbackup:2186
#, c-format
msgid "Minute"
msgstr "Минута"

#: standalone/drakbackup:2190
#, c-format
msgid "Hour"
msgstr "Час"

#: standalone/drakbackup:2194
#, c-format
msgid "Day"
msgstr "День"

#: standalone/drakbackup:2198
#, c-format
msgid "Month"
msgstr "Месяц"

#: standalone/drakbackup:2202
#, fuzzy, c-format
msgid "Weekday (start)"
msgstr "Будние дни"

#: standalone/drakbackup:2206
#, fuzzy, c-format
msgid "Weekday (end)"
msgstr "Будние дни"

#: standalone/drakbackup:2210
#, fuzzy, c-format
msgid "Profile"
msgstr "Профили"

#: standalone/drakbackup:2216
#, fuzzy, c-format
msgid "Current crontab:"
msgstr "Текущий пользователь"

#: standalone/drakbackup:2224
#, c-format
msgid "Please choose the media for backup."
msgstr "Выберите носитель для создания резервной копии."

#: standalone/drakbackup:2228
#, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr "Пожалуйста, убедитесь, что демон cron включен в ваши службы."

#: standalone/drakbackup:2229
#, c-format
msgid ""
"If your machine is not on all the time, you might want to install anacron."
msgstr ""
"Если ваша машина не включена все время, вам возможно будет удобно установить "
"anacron."

#: standalone/drakbackup:2293
#, fuzzy, c-format
msgid "Please choose the archive program"
msgstr "Укажите дату для восстановления, пожалуйста:"

#: standalone/drakbackup:2298
#, c-format
msgid "Please choose the compression type"
msgstr "Выберите тип сжатия"

#: standalone/drakbackup:2302
#, c-format
msgid "Use .backupignore files"
msgstr "Использовать .backupignore файлы"

#: standalone/drakbackup:2304
#, c-format
msgid "Send mail report after each backup to:"
msgstr "Отправить письмо с отчетом после каждого резервирования:"

#: standalone/drakbackup:2310
#, c-format
msgid "Return address for sent mail:"
msgstr "Обратный адрес для посылки email:"

#: standalone/drakbackup:2316
#, c-format
msgid "SMTP server for mail:"
msgstr "SMTP сервер для отправки почты:"

#: standalone/drakbackup:2320
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
"Удалить tar-файлы с жесткого диска после резервирования на другой носитель."

#: standalone/drakbackup:2321
#, fuzzy, c-format
msgid "View restore log after file restore."
msgstr "ОК, чтобы восстановить другие файлы."

#: standalone/drakbackup:2366
#, c-format
msgid "What"
msgstr "Что"

#: standalone/drakbackup:2371
#, c-format
msgid "Where"
msgstr "Где"

#: standalone/drakbackup:2376
#, c-format
msgid "When"
msgstr "Когда"

#: standalone/drakbackup:2381
#, c-format
msgid "More Options"
msgstr "Дополнительные опции"

#: standalone/drakbackup:2394
#, c-format
msgid "Backup destination not configured..."
msgstr "Не настроено куда сохранять резервную копию..."

#: standalone/drakbackup:2414 standalone/drakbackup:4339
#, c-format
msgid "Drakbackup Configuration"
msgstr "Настройка Drakbackup"

#: standalone/drakbackup:2430
#, c-format
msgid "Please choose where you want to backup"
msgstr "Пожалуйста, выберите, куда вы хотите сохранить резервные копии"

#: standalone/drakbackup:2433
#, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr "На жесткий диск, используемый для хранения резервных копий"

#: standalone/drakbackup:2433
#, c-format
msgid "Across Network"
msgstr "На сетевой ресурс"

#: standalone/drakbackup:2433
#, c-format
msgid "On CD-R"
msgstr "На CD-R"

#: standalone/drakbackup:2433
#, c-format
msgid "On Tape Device"
msgstr "На магнитную ленту"

#: standalone/drakbackup:2479
#, c-format
msgid "Backup Users"
msgstr "Резервировать пользователей"

#: standalone/drakbackup:2480
#, c-format
msgid " (Default is all users)"
msgstr " (по умолчанию это все пользователи)"

#: standalone/drakbackup:2493
#, c-format
msgid "Please choose what you want to backup"
msgstr "Пожалуйста, выберите, что вы хотите зарезервировать"

#: standalone/drakbackup:2494
#, c-format
msgid "Backup System"
msgstr "Резервировать систему"

#: standalone/drakbackup:2496
#, c-format
msgid "Select user manually"
msgstr "Выбрать пользователя вручную"

#: standalone/drakbackup:2525
#, c-format
msgid "Please select data to backup..."
msgstr "Пожалуйста, выберите данные для резервирования..."

#: standalone/drakbackup:2597
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"Источники резервирования:\n"

#: standalone/drakbackup:2598
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- Системные файлы:\n"

#: standalone/drakbackup:2600
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- Файлы пользователя:\n"

#: standalone/drakbackup:2602
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- Другие файлы:\n"

#: standalone/drakbackup:2604
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- Сохранение на жесткий диск в каталог: %s\n"

#: standalone/drakbackup:2605
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\tОграничить использование диска в пределах %s MB\n"

#: standalone/drakbackup:2606
#, c-format
msgid "\tDelete backups older than %s day(s)\n"
msgstr "\tУдалить резервные копии старше %s дней\n"

#: standalone/drakbackup:2609
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- Удалить tar-файлы с жесткого диска после резервирования.\n"

#: standalone/drakbackup:2614
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- Запись на CD"

#: standalone/drakbackup:2615
#, c-format
msgid "RW"
msgstr "RW"

#: standalone/drakbackup:2616
#, c-format
msgid " on device: %s"
msgstr " на устройство: %s"

#: standalone/drakbackup:2617
#, c-format
msgid " (multi-session)"
msgstr " (многосессионный)"

#: standalone/drakbackup:2618
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- Сохранение на ленту на устройство: %s"

#: standalone/drakbackup:2619
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\tСтереть=%s"

#: standalone/drakbackup:2621
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr "\tРезервировать непосредственно на ленту\n"

#: standalone/drakbackup:2623
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- Сохранение через %s на хост: %s\n"

#: standalone/drakbackup:2624
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t имя пользователя: %s\n"
"\t\t в каталог: %s \n"

#: standalone/drakbackup:2625
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- Опции:\n"

#: standalone/drakbackup:2626
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\tНе включать системные файлы\n"

#: standalone/drakbackup:2628
#, fuzzy, c-format
msgid "\tBackups use %s and bzip2\n"
msgstr "\tДля резервирования используется tar и bzip2\n"

#: standalone/drakbackup:2629
#, fuzzy, c-format
msgid "\tBackups use %s and gzip\n"
msgstr "\tДля резервирования используется tar и gzip\n"

#: standalone/drakbackup:2630
#, fuzzy, c-format
msgid "\tBackups use %s only\n"
msgstr "\tДля резервирования используется только tar\n"

#: standalone/drakbackup:2632
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\tИспользовать файлы .backupignore\n"

#: standalone/drakbackup:2633
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\tОтправить письмо на %s\n"

#: standalone/drakbackup:2634
#, c-format
msgid "\tSend mail from %s\n"
msgstr "\tПослать письмо от %s\n"

#: standalone/drakbackup:2635
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "\tИспользуется SMTP сервер %s\n"

#: standalone/drakbackup:2637
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Демон, %s через:\n"

#: standalone/drakbackup:2638
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-Жесткий диск.\n"

#: standalone/drakbackup:2639
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-Компакт-диск.\n"

#: standalone/drakbackup:2640
#, c-format
msgid "\t-Tape \n"
msgstr "\t-Магнитную ленту \n"

#: standalone/drakbackup:2641
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-Сеть с FTP.\n"

#: standalone/drakbackup:2642
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t-Сеть с SSH.\n"

#: standalone/drakbackup:2643
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-Сеть с rsync.\n"

#: standalone/drakbackup:2645
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "Нет конфигурации, пожалуйста, нажмите Мастер или Дополнительно.\n"

#: standalone/drakbackup:2650
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"Список данных для восстановления:\n"
"\n"

#: standalone/drakbackup:2652
#, c-format
msgid "- Restore System Files.\n"
msgstr "- Восстановить системные файлы.\n"

#: standalone/drakbackup:2654 standalone/drakbackup:2664
#, c-format
msgid "   - from date: %s %s\n"
msgstr "   - от даты: %s %s\n"

#: standalone/drakbackup:2657
#, c-format
msgid "- Restore User Files: \n"
msgstr "- Восстановить файлы пользователя: \n"

#: standalone/drakbackup:2662
#, c-format
msgid "- Restore Other Files: \n"
msgstr "- Восстановить остальные файлы: \n"

#: standalone/drakbackup:2841
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"Список поврежденных данных:\n"
"\n"

#: standalone/drakbackup:2843
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "Пожалуйста, не отмечайте или удалите его в следующий раз."

#: standalone/drakbackup:2853
#, c-format
msgid "Backup files are corrupted"
msgstr "Резервные файлы повреждены"

#: standalone/drakbackup:2874
#, c-format
msgid "          All of your selected data have been          "
msgstr "            Все выбранные вами данные были             "

#: standalone/drakbackup:2875
#, c-format
msgid "          Successfully Restored on %s       "
msgstr "         успешно восстановлены на %s       "

#: standalone/drakbackup:2976
#, c-format
msgid "/usr/bin/star not found, using tar..."
msgstr ""

#: standalone/drakbackup:3012
#, c-format
msgid "         Restore Configuration       "
msgstr "       Настройка восстановления      "

#: standalone/drakbackup:3040
#, c-format
msgid "OK to restore the other files."
msgstr "ОК, чтобы восстановить другие файлы."

#: standalone/drakbackup:3056
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
"Список пользователей для восстановления (для каждого пользователя важны "
"только наиболее поздние даты)"

#: standalone/drakbackup:3121
#, c-format
msgid "Please choose the date to restore:"
msgstr "Укажите дату для восстановления, пожалуйста:"

#: standalone/drakbackup:3158
#, c-format
msgid "Restore from Hard Disk."
msgstr "Восстановить с жесткого диска"

#: standalone/drakbackup:3160
#, c-format
msgid "Enter the directory where backups are stored"
msgstr "Укажите каталог для сохранения резервных копий"

#: standalone/drakbackup:3164
#, c-format
msgid "Directory with backups"
msgstr "Каталог с резервными копиями"

#: standalone/drakbackup:3218
#, c-format
msgid "Select another media to restore from"
msgstr "Выберите другой носитель для восстановления"

#: standalone/drakbackup:3220
#, c-format
msgid "Other Media"
msgstr "Другой носитель"

#: standalone/drakbackup:3225
#, c-format
msgid "Restore system"
msgstr "Восстановить систему"

#: standalone/drakbackup:3226
#, c-format
msgid "Restore Users"
msgstr "Восстановить пользователей"

#: standalone/drakbackup:3227
#, c-format
msgid "Restore Other"
msgstr "Восстановить другое"

#: standalone/drakbackup:3229
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "выберите путь для восстановления (вместо /)"

#: standalone/drakbackup:3233 standalone/drakbackup:3514
#, c-format
msgid "Path To Restore To"
msgstr "Путь для восстановления"

#: standalone/drakbackup:3236
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
"Выполнить новое резервирование перед восстановлением (только для нарастающих "
"резервирований.)"

#: standalone/drakbackup:3238
#, c-format
msgid "Remove user directories before restore."
msgstr "Удалить каталоги пользователя перед восстановлением."

#: standalone/drakbackup:3322
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr "Текст имени файла для поиска (пустая строка значит искать все):"

#: standalone/drakbackup:3325
#, c-format
msgid "Search Backups"
msgstr "Поиск резервных копий"

#: standalone/drakbackup:3343
#, c-format
msgid "No matches found..."
msgstr "Совпадений не найдено..."

#: standalone/drakbackup:3347
#, c-format
msgid "Restore Selected"
msgstr "Восстановить выбранные файлы"

#: standalone/drakbackup:3482
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""
"Кликните на дату/время чтобы просмотреть резервные копии.\n"
"Ctrl-Click выделяет несколько файлов."

#: standalone/drakbackup:3488
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""
"Восстановить выбранный\n"
"пункт каталога"

#: standalone/drakbackup:3497
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"Восстановить\n"
"выбранные файлы"

#: standalone/drakbackup:3573
#, c-format
msgid "Backup files not found at %s."
msgstr "Резервные файлы в %s не найдены."

#: standalone/drakbackup:3586
#, c-format
msgid "Restore From CD"
msgstr "Восстановить с компакт-диска"

#: standalone/drakbackup:3586
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"Вставьте компакт-диск с меткой тома %s\n"
"в CD-привод с точкой монтирования /mnt/cdrom"

#: standalone/drakbackup:3588
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "Неверная метка компакт-диска. Диск имеет метку %s."

#: standalone/drakbackup:3598
#, c-format
msgid "Restore From Tape"
msgstr "Восстановить с ленты"

#: standalone/drakbackup:3598
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"Вставьте ленту с меткой тома %s\n"
"в накопитель на магнитной ленте %s"

#: standalone/drakbackup:3600
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "Неверная метка ленты. Лента имеет метку %s."

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network"
msgstr "Восстановить по сети"

#: standalone/drakbackup:3611
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "Восстановить по сетевому протоколу: %s"

#: standalone/drakbackup:3612
#, c-format
msgid "Host Name"
msgstr "Имя хоста"

#: standalone/drakbackup:3613
#, c-format
msgid "Host Path or Module"
msgstr "Путь к хосту или модулю"

#: standalone/drakbackup:3620
#, c-format
msgid "Password required"
msgstr "Требуется пароль"

#: standalone/drakbackup:3626
#, c-format
msgid "Username required"
msgstr "Требуется имя пользователя"

#: standalone/drakbackup:3629
#, c-format
msgid "Hostname required"
msgstr "Требуется имя хоста"

#: standalone/drakbackup:3634
#, c-format
msgid "Path or Module required"
msgstr "Требуется путь к хосту или модулю"

#: standalone/drakbackup:3646
#, c-format
msgid "Files Restored..."
msgstr "Файлы восстановлены..."

#: standalone/drakbackup:3649
#, c-format
msgid "Restore Failed..."
msgstr "Восстановление завершилось неудачей"

#: standalone/drakbackup:3677
#, c-format
msgid "%s not retrieved..."
msgstr "%s не восстановлен..."

#: standalone/drakbackup:3901 standalone/drakbackup:3970
#, c-format
msgid "Search for files to restore"
msgstr "Найти файлы для восстановления"

#: standalone/drakbackup:3905
#, c-format
msgid "Restore all backups"
msgstr "Восстановить все резервные копии"

#: standalone/drakbackup:3913
#, c-format
msgid "Custom Restore"
msgstr "Выборочное восстановление"

#: standalone/drakbackup:3917 standalone/drakbackup:3966
#, c-format
msgid "Restore From Catalog"
msgstr "Восстановить из каталога"

#: standalone/drakbackup:3938
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr "Невозможно найти резервные копии для восстановления...\n"

#: standalone/drakbackup:3939
#, c-format
msgid "Verify that %s is the correct path"
msgstr "Проверьте что %s это корректный путь"

#: standalone/drakbackup:3940
#, c-format
msgid " and the CD is in the drive"
msgstr " и CD в устройстве"

#: standalone/drakbackup:3942
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""
"Резервные копии на немонтируемом носителе - Используйте Catalog для "
"восстановления"

#: standalone/drakbackup:3958
#, c-format
msgid "CD in place - continue."
msgstr "Компакт-диск на месте - продолжить."

#: standalone/drakbackup:3963
#, c-format
msgid "Browse to new restore repository."
msgstr "Найти новое хранилище для восстановления."

#: standalone/drakbackup:3964
#, c-format
msgid "Directory To Restore From"
msgstr "Каталог из которого восстанавливать"

#: standalone/drakbackup:4000
#, c-format
msgid "Restore Progress"
msgstr "Прогресс восстановления"

#: standalone/drakbackup:4108
#, c-format
msgid "Build Backup"
msgstr "Создать резервную копию"

#: standalone/drakbackup:4141 standalone/drakbackup:4438
#, c-format
msgid "Restore"
msgstr "Восстановить"

#: standalone/drakbackup:4233
#, c-format
msgid "Please select data to restore..."
msgstr "Пожалуйста, выберите данные для восстановления..."

#: standalone/drakbackup:4273
#, c-format
msgid "Backup system files"
msgstr "Резервирование системных файлов"

#: standalone/drakbackup:4276
#, c-format
msgid "Backup user files"
msgstr "Резервирование файлов пользователя"

#: standalone/drakbackup:4279
#, c-format
msgid "Backup other files"
msgstr "Резервирование других файлов"

#: standalone/drakbackup:4282 standalone/drakbackup:4316
#, c-format
msgid "Total Progress"
msgstr "Общий прогресс"

#: standalone/drakbackup:4308
#, c-format
msgid "Sending files by FTP"
msgstr "Файлы пересылаются по FTP"

#: standalone/drakbackup:4311
#, c-format
msgid "Sending files..."
msgstr "Файлы отправляются..."

#: standalone/drakbackup:4381
#, c-format
msgid "Backup Now from configuration file"
msgstr "Зарезервировать немедленно из файла конфигурации"

#: standalone/drakbackup:4386
#, c-format
msgid "View Backup Configuration."
msgstr "Показать конфигурацию резервирования"

#: standalone/drakbackup:4412
#, c-format
msgid "Wizard Configuration"
msgstr "Мастер настройки"

#: standalone/drakbackup:4417
#, c-format
msgid "Advanced Configuration"
msgstr "Расширенная настройка"

#: standalone/drakbackup:4422
#, c-format
msgid "View Configuration"
msgstr "Просмотреть конфигурацию"

#: standalone/drakbackup:4426
#, c-format
msgid "View Last Log"
msgstr "Просмотреть последний журнал"

#: standalone/drakbackup:4431
#, c-format
msgid "Backup Now"
msgstr "Зарезервировать немедленно"

#: standalone/drakbackup:4435
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"Файл конфигурации не найден, \n"
"пожалуйста, нажмите Мастер или Расширенный."

#: standalone/drakbackup:4473
#, fuzzy, c-format
msgid "Load profile"
msgstr "Локальный файл"

#: standalone/drakbackup:4482
#, fuzzy, c-format
msgid "Save profile as..."
msgstr "Сохранить как..."

#: standalone/drakbackup:4504 standalone/drakbackup:4507
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:49
#, c-format
msgid "No bootloader found, creating a new configuration"
msgstr "Начальный загрузчик не найден, создаётся новая конфигурация"

#: standalone/drakboot:84 standalone/harddrake2:190 standalone/harddrake2:191
#: standalone/harddrake2:192 standalone/logdrake:69
#: standalone/printerdrake:150 standalone/printerdrake:151
#: standalone/printerdrake:152
#, c-format
msgid "/_File"
msgstr "/_Файл"

#: standalone/drakboot:85 standalone/logdrake:75
#, c-format
msgid "/File/_Quit"
msgstr "/Файл/_Выход"

#: standalone/drakboot:85 standalone/harddrake2:192 standalone/logdrake:75
#: standalone/printerdrake:152
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:125
#, c-format
msgid "Text only"
msgstr "Только текст"

#: standalone/drakboot:126
#, c-format
msgid "Verbose"
msgstr "Подробно"

#: standalone/drakboot:127
#, c-format
msgid "Silent"
msgstr "Молча"

#: standalone/drakboot:134
#, c-format
msgid ""
"Your system bootloader is not in framebuffer mode. To activate graphical "
"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""
"Ваш системный начальный загрузчик сейчас не в режиме framebuffer. Чтобы "
"активировать графическую загрузку, выберите графический видеорежим в утилите "
"конфигурации загрузчика."

#: standalone/drakboot:135
#, c-format
msgid "Do you want to configure it now?"
msgstr "Хотите настроить это сейчас?"

#: standalone/drakboot:144
#, c-format
msgid "Install themes"
msgstr "Установить темы"

#: standalone/drakboot:146
#, c-format
msgid "Graphical boot theme selection"
msgstr "Выбор загрузочной графической темы"

#: standalone/drakboot:149
#, c-format
msgid "Graphical boot mode:"
msgstr "Режим графической загрузки:"

#: standalone/drakboot:151
#, c-format
msgid "Theme"
msgstr "Тема"

#: standalone/drakboot:154
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"Показывать темы\n"
"в консоли"

#: standalone/drakboot:159
#, c-format
msgid "Create new theme"
msgstr "Создать новую тему"

#: standalone/drakboot:191
#, c-format
msgid "Default user"
msgstr "Пользователь по умолчанию"

#: standalone/drakboot:192
#, c-format
msgid "Default desktop"
msgstr "Десктоп по умолчанию"

#: standalone/drakboot:195
#, c-format
msgid "No, I do not want autologin"
msgstr "Нет, я не хочу использовать автоматический вход"

#: standalone/drakboot:196
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr ""
"Да, я хочу использовать автоматический вход с этими (пользователь,\n"
"рабочим столом)"

#: standalone/drakboot:203
#, c-format
msgid "System mode"
msgstr "Системный режим"

#: standalone/drakboot:206
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "Запускать графическую оболочку при загрузке системы"

#: standalone/drakboot:272
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries "
"selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""
"Пожалуйста выберите видео-режим; он будет применен к каждой загрузочной "
"записи ниже.\n"
"Убедитесь что ваша видеокарта поддерживает выбранный вами режим."

#: standalone/drakbug:41
#, c-format
msgid "Mandriva Linux Bug Report Tool"
msgstr "Утилита создания отчета об ошибке Mandriva Linux"

#: standalone/drakbug:46
#, c-format
msgid "Mandriva Linux Control Center"
msgstr "Центр управления Mandriva Linux"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr "Утилита синхронизации"

#: standalone/drakbug:49 standalone/drakbug:152
#, c-format
msgid "Standalone Tools"
msgstr "Самостоятельные утилиты"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake"

#: standalone/drakbug:51
#, c-format
msgid "Mandriva Online"
msgstr "Mandriva Online"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Menudrake"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "Msec"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr "Удаленное управление"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "Менеджер программного обеспечения"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr "Утилита миграции Windows"

#: standalone/drakbug:58 standalone/draksambashare:1236
#, c-format
msgid "Userdrake"
msgstr "Userdrake"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr "Мастера настройки"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandriva Tool:"
msgstr "Выберите утилиту Mandriva:"

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""
"или Название приложения\n"
"(или полный путь):"

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "Найти пакет"

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "Пакет:"

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "Ядро:"

#: standalone/drakbug:101
#, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill "
"in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel "
"version, and /proc/cpuinfo."
msgstr ""
"Чтобы оправить отчет об ошибке, нажмите на кнопку Отчет.\n"
"Откроется окно веб-браузера на %s, где вы найдете форму для заполнения. "
"Информация, представленная выше, будет отправлена на этот сервер\n"
" Полезно также сообщить вывод lspci, версию ядра и proc/cpuinfo."

#: standalone/drakbug:107
#, c-format
msgid "Report"
msgstr "Отчет"

#: standalone/drakbug:162
#, c-format
msgid "Not installed"
msgstr "Не установлен"

#: standalone/drakbug:174
#, c-format
msgid "Package not installed"
msgstr "Пакет не установлен"

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, c-format
msgid "not defined"
msgstr "неопределен"

#: standalone/drakclock:41
#, c-format
msgid "Change Time Zone"
msgstr "Изменить часовой пояс"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "Часовой пояс - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "Ваши аппаратные часы выставлены по GMT?"

#: standalone/drakclock:75
#, c-format
msgid "Network Time Protocol"
msgstr "Network Time Protocol"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""
"Ваш компьютер может синхронизировать свои часы\n"
" с удаленным сервером времени, используя NTP"

#: standalone/drakclock:78
#, c-format
msgid "Enable Network Time Protocol"
msgstr "Включить Network Time Protocol"

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "Сервер:"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr "Невозможно синхронизироваться с %s."

#: standalone/drakclock:146 standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "Сброс"

#: standalone/drakclock:224
#, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr ""
"Необходимо установить пакет ntp,\n"
" чтобы включить Network Time Protocol\n"
"\n"
"Вы согласны установить ntp ?"

#: standalone/drakconnect:80
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "Конфигурация сети  (%d адаптеров)"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Gateway:"
msgstr "Шлюз:"

#: standalone/drakconnect:89 standalone/drakconnect:807
#, c-format
msgid "Interface:"
msgstr "Интерфейс:"

#: standalone/drakconnect:93 standalone/net_monitor:116
#, c-format
msgid "Wait please"
msgstr "Подождите, пожалуйста"

#: standalone/drakconnect:109
#, c-format
msgid "Interface"
msgstr "Интерфейс"

#: standalone/drakconnect:109 standalone/printerdrake:224
#: standalone/printerdrake:231
#, c-format
msgid "State"
msgstr "Состояние"

#: standalone/drakconnect:126
#, c-format
msgid "Hostname: "
msgstr "Имя хоста:"

#: standalone/drakconnect:128
#, c-format
msgid "Configure hostname..."
msgstr "Настроить имя хоста..."

#: standalone/drakconnect:142 standalone/drakconnect:845
#, c-format
msgid "LAN configuration"
msgstr "Настройка локальной сети"

#: standalone/drakconnect:147
#, c-format
msgid "Configure Local Area Network..."
msgstr "Настроить локальную сеть..."

#: standalone/drakconnect:155 standalone/drakconnect:237
#: standalone/drakconnect:241
#, c-format
msgid "Apply"
msgstr "Применить"

#: standalone/drakconnect:188
#, c-format
msgid "Manage connections"
msgstr "Управление соединениями"

#: standalone/drakconnect:215
#, c-format
msgid "Device selected"
msgstr "Выбранное устройство"

#: standalone/drakconnect:296
#, c-format
msgid "IP configuration"
msgstr "Настройка IP"

#: standalone/drakconnect:335
#, c-format
msgid "DNS servers"
msgstr "DNS сервера"

#: standalone/drakconnect:343
#, c-format
msgid "Search Domain"
msgstr "Поиск домена"

#: standalone/drakconnect:351
#, c-format
msgid "static"
msgstr "статический"

#: standalone/drakconnect:351
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:515
#, c-format
msgid "Flow control"
msgstr "Управление потоком"

#: standalone/drakconnect:516
#, c-format
msgid "Line termination"
msgstr "Обрыв линии"

#: standalone/drakconnect:527
#, c-format
msgid "Modem timeout"
msgstr "Таймаут модема"

#: standalone/drakconnect:531
#, c-format
msgid "Use lock file"
msgstr "Использовать lock файл"

#: standalone/drakconnect:533
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr "Ожидать dialup тон перед набором"

#: standalone/drakconnect:536
#, c-format
msgid "Busy wait"
msgstr "Busy ожидание"

#: standalone/drakconnect:541
#, c-format
msgid "Modem sound"
msgstr "Звук модема"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Enable"
msgstr "Включить"

#: standalone/drakconnect:542 standalone/drakgw:105
#, c-format
msgid "Disable"
msgstr "Отключить"

#: standalone/drakconnect:593 standalone/harddrake2:50
#, c-format
msgid "Media class"
msgstr "Класс носителя"

#: standalone/drakconnect:594
#, c-format
msgid "Module name"
msgstr "Имя модуля"

#: standalone/drakconnect:595
#, c-format
msgid "Mac Address"
msgstr "Mac адрес:"

#: standalone/drakconnect:596 standalone/harddrake2:28
#: standalone/harddrake2:120
#, c-format
msgid "Bus"
msgstr "Шина"

#: standalone/drakconnect:597 standalone/harddrake2:34
#, c-format
msgid "Location on the bus"
msgstr "Расположение шины"

#: standalone/drakconnect:700 standalone/drakgw:311
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system. Please run the "
"hardware configuration tool."
msgstr ""
"В вашей системе не обнаружен сетевой адаптер. Пожалуйста, запустите утилиту "
"настройки оборудования."

#: standalone/drakconnect:708
#, c-format
msgid "Remove a network interface"
msgstr "Удалить сетевой интерфейс"

#: standalone/drakconnect:712
#, c-format
msgid "Select the network interface to remove:"
msgstr "Выберите сетевой интерфейс для удаления:"

#: standalone/drakconnect:744
#, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"При удалении сетевого интерфейса \"%s\" возникла ошибка:\n"
"\n"
"%s"

#: standalone/drakconnect:745
#, c-format
msgid ""
"Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr "Поздравления, сетевой интерфейс\"%s\" был успешно удален"

#: standalone/drakconnect:761
#, c-format
msgid "No IP"
msgstr "Отсутствует IP"

#: standalone/drakconnect:762
#, c-format
msgid "No Mask"
msgstr "Отсутствует Маска"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "up"
msgstr "поднят"

#: standalone/drakconnect:763 standalone/drakconnect:916
#, c-format
msgid "down"
msgstr "опущен"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Connected"
msgstr "Подключен"

#: standalone/drakconnect:798 standalone/net_monitor:465
#, c-format
msgid "Not connected"
msgstr "Не подключен"

#: standalone/drakconnect:800
#, c-format
msgid "Disconnect..."
msgstr "Отключить..."

#: standalone/drakconnect:800
#, c-format
msgid "Connect..."
msgstr "Подключить..."

#: standalone/drakconnect:841
#, c-format
msgid "Deactivate now"
msgstr "Отключить сейчас"

#: standalone/drakconnect:841
#, c-format
msgid "Activate now"
msgstr "Включить сейчас"

#: standalone/drakconnect:849
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"У вас нет ни одного настроенного интерфейса.\n"
"Настройте их сначала, нажав на 'Настроить'"

#: standalone/drakconnect:863
#, c-format
msgid "LAN Configuration"
msgstr "Настройка локальной сети"

#: standalone/drakconnect:875
#, c-format
msgid "Adapter %s: %s"
msgstr "Адаптер %s: %s"

#: standalone/drakconnect:884
#, c-format
msgid "Boot Protocol"
msgstr "Протокол загрузки"

#: standalone/drakconnect:885
#, c-format
msgid "Started on boot"
msgstr "Запущен при загрузке"

#: standalone/drakconnect:921
#, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandriva Linux Control Center"
msgstr ""
"Этот интерфейс еще не был настроен.\n"
"Запустите помощника \"Добавить интерфейс\" из Центра Управления Mandriva "
"Linux"

#: standalone/drakconnect:975 standalone/net_applet:51
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""
"У вас еще нет ни одного настроенного соединения с Интернет.\n"
"Запустите помощника \"%s\" из Центра Управления Mandriva Linux"

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
#, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "Настройка нового сетевого интерфейса (LAN, ISDN, ADSL, ...)"

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr "Настройка подключения к Интернету"

#: standalone/drakconnect:994
#, c-format
msgid "Third DNS server (optional)"
msgstr "Третий DNS сервер (опционально)"

#: standalone/drakconnect:1016
#, c-format
msgid "Internet Connection Configuration"
msgstr "Настройка подключения к Интернету"

#: standalone/drakconnect:1017
#, c-format
msgid "Internet access"
msgstr "Доступ к Интернету"

#: standalone/drakconnect:1019 standalone/net_monitor:95
#, c-format
msgid "Connection type: "
msgstr "Тип соединения: "

#: standalone/drakconnect:1022
#, c-format
msgid "Status:"
msgstr "Состояние:"

#: standalone/drakconnect:1027
#, c-format
msgid "Parameters"
msgstr "Параметры"

#: standalone/drakedm:40
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr "GDM (менеджер экрана GNOME)"

#: standalone/drakedm:41
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr "KDM (менеджер экрана KDE)"

#: standalone/drakedm:42
#, c-format
msgid "XDM (X Display Manager)"
msgstr "XDM (менеджер экрана X)"

#: standalone/drakedm:53
#, c-format
msgid "Choosing a display manager"
msgstr "Выбор менеджера экрана"

#: standalone/drakedm:54
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""
"Менеджер экрана X11 предоставляет вам графический вход\n"
"в вашу систему с запущенной системой X Window и позволяет запуск\n"
"одновременно нескольких X-сессий на вашей локальной машине."

#: standalone/drakedm:72
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "Изменения выполнены. Желаете перезапустить службу dm?"

#: standalone/drakedm:73
#, c-format
msgid ""
"You are going to close all running programs and lose your current session. "
"Are you really sure that you want to restart the dm service?"
msgstr ""
"Вы собираетесь завершить все запущенные программы и тем самым потерять "
"текущий сеанс. Вы действительно уверены, что хотите перезапустить службу dm?"

#: standalone/drakfont:183
#, c-format
msgid "Search installed fonts"
msgstr "Поиск установленных шрифтов"

#: standalone/drakfont:185
#, c-format
msgid "Unselect fonts installed"
msgstr "Снять выделение с установленных шрифтов"

#: standalone/drakfont:208
#, c-format
msgid "parse all fonts"
msgstr "разобрать все шрифты"

#: standalone/drakfont:210
#, c-format
msgid "No fonts found"
msgstr "Шрифты не найдены"

#: standalone/drakfont:218 standalone/drakfont:260 standalone/drakfont:327
#: standalone/drakfont:360 standalone/drakfont:368 standalone/drakfont:394
#: standalone/drakfont:412 standalone/drakfont:426
#, c-format
msgid "done"
msgstr "выполнено"

#: standalone/drakfont:223
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "Не удалось найти ни одного шрифта на ваших примонтированных разделах"

#: standalone/drakfont:258
#, c-format
msgid "Reselect correct fonts"
msgstr "Заново выбрать правильные шрифты"

#: standalone/drakfont:261
#, c-format
msgid "Could not find any font.\n"
msgstr "Не удалось найти ни одного шрифта.\n"

#: standalone/drakfont:271
#, c-format
msgid "Search for fonts in installed list"
msgstr "Поиск шрифтов в списке установленных"

#: standalone/drakfont:296
#, c-format
msgid "%s fonts conversion"
msgstr "%s преобразования шрифтов"

#: standalone/drakfont:325
#, c-format
msgid "Fonts copy"
msgstr "Копия шрифтов"

#: standalone/drakfont:328
#, c-format
msgid "True Type fonts installation"
msgstr "Установка шрифтов True Type"

#: standalone/drakfont:335
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "пожалуйста, подождите пока выполняется ttmkfdir.."

#: standalone/drakfont:336
#, c-format
msgid "True Type install done"
msgstr "Установка True Type завершена"

#: standalone/drakfont:342 standalone/drakfont:357
#, c-format
msgid "type1inst building"
msgstr "создание type1inst"

#: standalone/drakfont:351
#, c-format
msgid "Ghostscript referencing"
msgstr "создание связей Ghostscript"

#: standalone/drakfont:361
#, c-format
msgid "Suppress Temporary Files"
msgstr "Удаление временных файлов"

#: standalone/drakfont:364
#, c-format
msgid "Restart XFS"
msgstr "Перезапуск XFS"

#: standalone/drakfont:410 standalone/drakfont:420
#, c-format
msgid "Suppress Fonts Files"
msgstr "Удаление файлов шрифтов"

#: standalone/drakfont:422
#, c-format
msgid "xfs restart"
msgstr "перезапуск xfs"

#: standalone/drakfont:430
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and "
"install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may "
"hang up your X Server."
msgstr ""
"Перед установкой любых шрифтов убедитесь, что у вас есть права на их "
"создание и установку в вашу систему.\n"
"\n"
"Вы можете установить шрифты обычным способом. В редких случаях отсутствующие "
"шрифты могут подвесить ваш Х-сервер."

#: standalone/drakfont:474 standalone/drakfont:483
#, c-format
msgid "DrakFont"
msgstr "DrakFont"

#: standalone/drakfont:484
#, c-format
msgid "Font List"
msgstr "Список шрифтов"

#: standalone/drakfont:487
#, c-format
msgid "Get Windows Fonts"
msgstr "Получить шрифты из Windows "

#: standalone/drakfont:493
#, c-format
msgid "About"
msgstr "О программе"

#: standalone/drakfont:495 standalone/drakfont:689 standalone/drakfont:727
#, c-format
msgid "Uninstall"
msgstr "Удалить"

#: standalone/drakfont:496
#, c-format
msgid "Import"
msgstr "Импорт"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:514
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"
msgstr ""
"Copyright (C) 2001-2002 by Mandriva \n"
"\n"
"\n"
"       DUPONT Sebastien (оригинальная версия)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandriva.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandriva.com>"

#: standalone/drakfont:523
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
"Эта программа является открытым программным обеспечением; вы можете\n"
" распространять ее дальше и/или изменять ее при условии соблюдения GNU\n"
" General Public License, опубликованной Free Software Foundation, 2-й\n"
" версии или любой другой (на ваше усмотрение) более поздней версии.\n"
"\n"
"\n"
" Эта программа распространяется в надежде быть полезной, но БЕЗО ВСЯКОЙ\n"
" ГАРАНТИИ; даже без подразумеваемой гарантии РАБОТОСПОСОБНОСТИ или\n"
" ПРИГОДНОСТИ ДЛЯ КОНКРЕТНЫХ ЦЕЛЕЙ. Подробности смотрите в GNU General "
"Public\n"
" License\n"
"\n"
"\n"
" Вы должны были получить копию GNU General Public License вместе с этой\n"
" программой; если нет - напишите в Free Software Foundation, Inc.,\n"
" 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA."

#: standalone/drakfont:539
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""
"Благодарности:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Конвертирование Windows .pfm  файла в .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst создает файлы fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Конвертирование файлов ttf шрифтов в afm и pfb шрифтыfonts\n"

#: standalone/drakfont:558
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "Выберите приложения, которые будут поддерживать шрифты :"

#: standalone/drakfont:569
#, c-format
msgid "Ghostscript"
msgstr "Ghostscript"

#: standalone/drakfont:570
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:571
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:572
#, c-format
msgid "Generic Printers"
msgstr "Стандартные принтеры"

#: standalone/drakfont:586
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "Выберите файл шрифта или каталог и нажмите 'Добавить'"

#: standalone/drakfont:587
#, c-format
msgid "File Selection"
msgstr "Выбор файла"

#: standalone/drakfont:591
#, c-format
msgid "Fonts"
msgstr "Шрифты"

#: standalone/drakfont:654
#, c-format
msgid "Import fonts"
msgstr "Импорт шрифтов"

#: standalone/drakfont:659
#, c-format
msgid "Install fonts"
msgstr "Установить шрифты"

#: standalone/drakfont:694
#, c-format
msgid "click here if you are sure."
msgstr "если вы уверены, нажмите сюда."

#: standalone/drakfont:696
#, c-format
msgid "here if no."
msgstr "если не уверены - сюда"

#: standalone/drakfont:735
#, c-format
msgid "Unselected All"
msgstr "Снять выделение со всех"

#: standalone/drakfont:738
#, c-format
msgid "Selected All"
msgstr "Выбрать все"

#: standalone/drakfont:741
#, c-format
msgid "Remove List"
msgstr "Удалить список"

#: standalone/drakfont:752 standalone/drakfont:771
#, c-format
msgid "Importing fonts"
msgstr "Импортирование шрифтов"

#: standalone/drakfont:756 standalone/drakfont:776
#, c-format
msgid "Initial tests"
msgstr "Тесты инициализации"

#: standalone/drakfont:757
#, c-format
msgid "Copy fonts on your system"
msgstr "Копирование шрифтов в вашу систему"

#: standalone/drakfont:758
#, c-format
msgid "Install & convert Fonts"
msgstr "Установка и конвертирование шрифтов"

#: standalone/drakfont:759
#, c-format
msgid "Post Install"
msgstr "Завершение установки"

#: standalone/drakfont:777
#, c-format
msgid "Remove fonts on your system"
msgstr "Удаление шрифтов из вашей системы"

#: standalone/drakfont:778
#, c-format
msgid "Post Uninstall"
msgstr "Завершение удаления"

#: standalone/drakgw:50 standalone/drakvpn:51
#, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "Извините, поддерживаются только ядра 2.4 и выше."

#: standalone/drakgw:75
#, c-format
msgid "Internet Connection Sharing"
msgstr "Совместное использование подключения к Интернету"

#: standalone/drakgw:79
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use "
"this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect "
"before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network "
"(LAN)."
msgstr ""
"Вы собираетесь настроить свой компьютер для совместного использования\n"
"подключения к Интернету. Благодаря этой возможности, другие компьютеры в\n"
"вашей локальной сети смогут использовать подключение этого компьютера\n"
"к Интернету.\n"
"\n"
"Перед тем, как продолжить, убедитесь, что вы настроили свой доступ к\n"
"Интернету/локальной сети при помощи drakconnect.\n"
"Примечание: вам потребуется отдельный сетевой адаптер для подключения к\n"
"локальной сети (LAN)."

#: standalone/drakgw:95
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Установка совместного использования подключения к Интернету уже была "
"выполнена.\n"
"В данный момент оно включено.\n"
"\n"
"Что вы хотите сделать?"

#: standalone/drakgw:99
#, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Настройка совместного использования подключения к Интернету уже была "
"выполнена.\n"
"В данный момент оно отключено.\n"
"\n"
"Что бы вы хотели сделать?"

#: standalone/drakgw:105
#, c-format
msgid "Reconfigure"
msgstr "Перенастройка"

#: standalone/drakgw:145
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"В вашей системе есть только один настроенный сетевой адаптер:\n"
"\n"
"%s\n"
"\n"
"Я собираюсь настроить вашу локальную сеть, используя этот адаптер."

#: standalone/drakgw:156
#, c-format
msgid ""
"Please choose what network adapter will be connected to your Local Area "
"Network."
msgstr ""
"Пожалуйста, выберите сетевой адаптер, который будет подключен к вашей "
"локальной сети."

#: standalone/drakgw:177
#, c-format
msgid "Local Area Network settings"
msgstr "Настройки локальной сети"

#: standalone/drakgw:180
#, c-format
msgid "Local IP address"
msgstr "Локальный IP адрес"

#: standalone/drakgw:182
#, c-format
msgid "The internal domain name"
msgstr "Имя внутреннего домена"

#: standalone/drakgw:188
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr ""
"Обнаружен возможный конфликт адреса локальной сети в текущей конфигурации %"
"s!\n"

#: standalone/drakgw:204
#, c-format
msgid "Domain Name Server (DNS) configuration"
msgstr "Настройка сервера доменных имен (DNS)"

#: standalone/drakgw:208
#, c-format
msgid "Use this gateway as domain name server"
msgstr "Использовать данный шлюз как сервер доменных имен"

#: standalone/drakgw:209
#, c-format
msgid "The DNS Server IP"
msgstr "IP-адрес сервера DNS"

#: standalone/drakgw:236
#, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""
"Настройка сервера DHCP.\n"
"\n"
"Здесь вы можете выбрать различные опции для настройки сервера DHCP.\n"
"Если вы не знаете, что означает та или иная опция, просто оставьте ее как "
"есть."

#: standalone/drakgw:243
#, c-format
msgid "Use automatic configuration (DHCP)"
msgstr "Использовать автоматическую настройку (DHCP)"

#: standalone/drakgw:244
#, c-format
msgid "The DHCP start range"
msgstr "Начальный диапазон DHCP"

#: standalone/drakgw:245
#, c-format
msgid "The DHCP end range"
msgstr "Конечный диапазон DHCP"

#: standalone/drakgw:246
#, c-format
msgid "The default lease (in seconds)"
msgstr "Владение адресом по умолчанию (в секундах)"

#: standalone/drakgw:247
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "Максимальное владение адресом по умолчанию (в секундах)"

#: standalone/drakgw:270
#, c-format
msgid "Proxy caching server (SQUID)"
msgstr "Кэширующий прокси-сервер (SQUID)"

#: standalone/drakgw:274
#, c-format
msgid "Use this gateway as proxy caching server"
msgstr "Использовать данный шлюз как кэширующий прокси-сервер"

#: standalone/drakgw:275
#, c-format
msgid "Admin mail"
msgstr "Почта администратора"

#: standalone/drakgw:276
#, c-format
msgid "Visible hostname"
msgstr "Видимое имя хоста"

#: standalone/drakgw:277
#, c-format
msgid "Proxy port"
msgstr "Порт прокси"

#: standalone/drakgw:278
#, c-format
msgid "Cache size (MB)"
msgstr "Размер кэша (MB)"

#: standalone/drakgw:300
#, c-format
msgid "Broadcast printer information"
msgstr "Широковещательная информация о принтере"

#: standalone/drakgw:317
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Совместное использование подключения к Интернету теперь включено."

#: standalone/drakgw:323
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Совместное использование подключения к Интернету теперь отключено."

#: standalone/drakgw:329
#, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local "
"Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"Все было настроено.\n"
"Теперь вы можете использовать свое подключение к Интернету совместно с "
"другими компьютерами вашей локальной сети, используя автоматическую\n"
"настройку сети (DHCP) и Transparent Proxy Cache сервер (SQUID)."

#: standalone/drakgw:364
#, c-format
msgid "Disabling servers..."
msgstr "Выключаются серверы..."

#: standalone/drakgw:378
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Обнаружена конфигурация файервола!"

#: standalone/drakgw:379
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""
"Предупреждение! Были обнаружены существующие настройки файервола. Вам может "
"понадобиться подправить их вручную после установки."

#: standalone/drakgw:384
#, c-format
msgid "Configuring..."
msgstr "Настройка..."

#: standalone/drakgw:385
#, c-format
msgid "Configuring firewall..."
msgstr "Настройка файервола..."

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"This is free software and may be redistributed under the terms of the GNU "
"GPL.\n"
"\n"
"Usage: \n"
msgstr ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2005 Mandriva.\n"
"Это свободное программное обеспечение и оно может распространяться в "
"соответствии с условиями лицензии GNU GPL.\n"
"\n"
"Использование: \n"

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr " --help                - вывести эту справку     \n"

#: standalone/drakhelp:23
#, c-format
msgid ""
" --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""
" --id <id_label>       - загрузить html-страницу справки,\n"
"                         которая ссылается на id_label\n"

#: standalone/drakhelp:24
#, c-format
msgid ""
" --doc <link>          - link to another web page ( for WM welcome "
"frontend)\n"
msgstr ""
" --doc <link>          - ссылка на другую web-страницу ( для интерфейса\n"
"                          приветствия WM )\n"

#: standalone/drakhelp:51
#, c-format
msgid "Mandriva Linux Help Center"
msgstr "Центр справки Mandriva"

#: standalone/drakhelp:51
#, c-format
msgid "No Help entry for %s\n"
msgstr ""

#: standalone/drakhosts:98
#, c-format
msgid "Please add an host to be able to modify it."
msgstr "Пожалуйста добавьте хост чтобы иметь возможность его изменять."

#: standalone/drakhosts:108
#, c-format
msgid "Please modify information"
msgstr "Пожалуйста измените информацию"

#: standalone/drakhosts:109
#, c-format
msgid "Please delete information"
msgstr "Пожалуйста удалите информацию"

#: standalone/drakhosts:110
#, c-format
msgid "Please add information"
msgstr "Пожалуйста добавьте информацию"

#: standalone/drakhosts:115
#, c-format
msgid "IP address:"
msgstr "IP адрес:"

#: standalone/drakhosts:116
#, c-format
msgid "Host name:"
msgstr "Имя хоста:"

#: standalone/drakhosts:117
#, c-format
msgid "Host Aliases:"
msgstr "Алиасы хоста:"

#: standalone/drakhosts:123
#, c-format
msgid "Please enter a valid IP address."
msgstr "Пожалуйста введите правильный IP адрес."

#: standalone/drakhosts:129
#, c-format
msgid "Same IP is already in %s file."
msgstr "Подобный IP уже находится в файле %s."

#: standalone/drakhosts:197
#, c-format
msgid "Host Aliases"
msgstr "Алиасы хоста"

#: standalone/drakhosts:237
#, c-format
msgid "DrakHOSTS manage hosts definitions"
msgstr "DrakHOSTS управляет определениями хостов"

#: standalone/drakhosts:246
#, c-format
msgid "Failed to add host."
msgstr "Не удалось добавить хост."

#: standalone/drakhosts:253
#, c-format
msgid "Failed to Modify host."
msgstr "Не удалось изменить хост."

#: standalone/drakhosts:260
#, c-format
msgid "Failed to remove host."
msgstr "Не удалось удалить хост."

#: standalone/drakids:26
#, c-format
msgid "Allowed addresses"
msgstr "Разрешенные адреса"

#: standalone/drakids:57
#, c-format
msgid "Log"
msgstr "Журнал"

#: standalone/drakids:61
#, c-format
msgid "Clear logs"
msgstr "Очистить журнал"

#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:470
#, c-format
msgid "Blacklist"
msgstr "Черный список"

#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:475
#, c-format
msgid "Whitelist"
msgstr "Белый список"

#: standalone/drakids:71
#, c-format
msgid "Remove from blacklist"
msgstr "Удалить из черного списка"

#: standalone/drakids:72
#, c-format
msgid "Move to whitelist"
msgstr "Переместить в белый список"

#: standalone/drakids:84
#, c-format
msgid "Remove from whitelist"
msgstr "Удалить из белого списка"

#: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
#: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
#: standalone/drakroam:182 standalone/net_applet:202 standalone/net_applet:385
#, c-format
msgid "Unable to contact daemon"
msgstr "Невозможно пообщаться с демоном"

#: standalone/drakids:202
#, c-format
msgid "Date"
msgstr "Дата"

#: standalone/drakids:203
#, c-format
msgid "Attacker"
msgstr "Атакующий"

#: standalone/drakids:204
#, c-format
msgid "Attack type"
msgstr "Тип атаки"

#: standalone/drakids:205
#, c-format
msgid "Service"
msgstr "Служба"

#: standalone/drakids:206 standalone/net_applet:72
#, c-format
msgid "Network interface"
msgstr "Сетевой интерфейс"

#: standalone/draknfs:41
#, c-format
msgid "map root user as anonymous"
msgstr "отображать пользователя root как anonymous"

#: standalone/draknfs:42
#, c-format
msgid "map all users to anonymous user"
msgstr "отображать всех пользователей как anonymous"

#: standalone/draknfs:43
#, c-format
msgid "No user UID mapping"
msgstr "Без отображения UID пользователей"

#: standalone/draknfs:44
#, c-format
msgid "allow real remote root access"
msgstr "разрешить реальный удаленный доступ для root"

#: standalone/draknfs:83
#, c-format
msgid "NFS server"
msgstr "Сервер NFS"

#: standalone/draknfs:83
#, c-format
msgid "Restarting/Reloading NFS server..."
msgstr "Перезагрузка сервера NFS..."

#: standalone/draknfs:84
#, c-format
msgid "Error Restarting/Reloading NFS server"
msgstr "Ошибка перезагрузки сервера NFS"

#: standalone/draknfs:100 standalone/draksambashare:203
#, c-format
msgid "Directory Selection"
msgstr "Выбор каталога"

#: standalone/draknfs:105 standalone/draksambashare:208
#, c-format
msgid "Should be a directory."
msgstr "Должен быть каталогом."

#: standalone/draknfs:136
#, c-format
msgid ""
"<span weight=\"bold\">NFS clients</span> may be specified in a number of "
"ways:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">single host:</span> a host either by an "
"abbreviated name recognized be the resolver, fully qualified domain name, or "
"an IP address\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">netgroups:</span> NIS netgroups may be given "
"as @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">wildcards:</span> machine names may contain "
"the wildcard characters * and ?. For instance: *.cs.foo.edu  matches all  "
"hosts  in the domain cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP networks:</span> you can also export "
"directories to all hosts on an IP (sub-)network simultaneously. for example, "
"either `/255.255.252.0' or  `/22'  appended to the network base address "
"result.\n"
msgstr ""
"<span weight=\"bold\">NFS клиенты</span> могут указывать номер такими "
"способами:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">одиночный хост:</span> хост в виде имени, "
"которое может быть преобразовано сервером, то есть полное доменное имя, или "
"просто IP адрес\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">сетевые группы(netgroups):</span>сетевые "
"группы NIS можно ввести как @group.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">шаблоны (wildcards):</span> имена машин "
"могут содержать символы шаблона * и ?. Например: *.cs.foo.edu  соответствует "
"всем хостам в домене cs.foo.edu.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">IP сети:</span> вы также можете "
"экспортировать каталоги на все хосты локальной (под)сети одновременно. "
"Например, `/255.255.252.0' или  `/22' добавляется в результате к базовому "
"адресу сети.\n"

#: standalone/draknfs:151
#, c-format
msgid ""
"<span weight=\"bold\">User ID options</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map root user as anonymous:</span> map "
"requests from uid/gid 0 to the anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">allow real remote root access:</span> turn "
"off root squashing. This option is mainly useful for diskless clients "
"(no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">map all users to anonymous user:</span> map "
"all uids and gids to the anonymous  user (all_squash). Useful for NFS-"
"exported public FTP directories, news spool directories, etc. The opposite "
"option is no user UID mapping (no_all_squash), which is the default "
"setting.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid and anongid:</span> explicitly set "
"the uid and gid of the anonymous account.\n"
msgstr ""
"<span weight=\"bold\">Параметры ID пользователя</span>\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">отображать пользователя root как anonymous:</"
"span> отображать запросы с uid/gid 0 на anonymous uid/gid (root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">разрешить реальный доступ для root:</span> "
"выключить root squashing. Эта опция в основном полезна для бездисковых "
"клиентов (no_root_squash).\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">отображать всех пользователей как anonymous:"
"</span> отображать все uid-ы and gid-ы как anonymous пользователь "
"(all_squash). Полезно для экпортируемых по NFS общедоступных FTP каталогов, "
"новых спул-каталогов и т.д. Обратная опция это не делать отображения UID "
"пользователей (no_all_squash), что является установкой по умолчанию.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">anonuid и anongid:</span> однозначная "
"установка uid и gid на аккаунт anonymous.\n"

#: standalone/draknfs:167
#, c-format
msgid "Synchronous access:"
msgstr "Синхронный доступ:"

#: standalone/draknfs:168
#, c-format
msgid "Secured Connection:"
msgstr "Зашищенное соединение:"

#: standalone/draknfs:169
#, c-format
msgid "Read-Only share:"
msgstr "Общий доступ только на чтение:"

#: standalone/draknfs:171
#, c-format
msgid "<span weight=\"bold\">Advanced Options</span>"
msgstr "<span weight=\"bold\">Дополнительные параметры</span>"

#: standalone/draknfs:172
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> this option requires that "
"requests originate on an internet port less than IPPORT_RESERVED (1024). "
"This option is on by default."
msgstr ""
"<span foreground=\"royalblue3\">%s:</span> эта опция требует чтобы запросы "
"исходили от интернет порта меньше чем IPPORT_RESERVED (1024). Является "
"опцией по умолчанию."

#: standalone/draknfs:173
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> allow either only read or both "
"read and write requests on this NFS volume. The default is to disallow any "
"request which changes the filesystem. This can also be made explicit by "
"using this option."
msgstr ""
"<span foreground=\"royalblue3\">%s:</span> позволяет чтение либо чтение и "
"запись на раздел NFS. По умолчанию все запросы на изменение файловой системы "
"отключены. Этой опцией можно это сделать однозначно."

#: standalone/draknfs:174
#, c-format
msgid ""
"<span foreground=\"royalblue3\">%s:</span> disallows the NFS server to "
"violate the NFS protocol and to reply to requests before any changes made by "
"these requests have been committed to stable storage (e.g. disc drive)."
msgstr ""
"<span foreground=\"royalblue3\">%s:</span> запрещает NFS серверу нарушать "
"NFS протокол и ответы на запросы перед любыми изменениями должны быть "
"сохранены на стабильное хранилище (т.е. диск)."

#: standalone/draknfs:306
#, c-format
msgid "Please add an NFS share to be able to modify it."
msgstr "Пожалуйста добавьте ресурс NFS чтобы иметь возможность его изменять."

#: standalone/draknfs:378
#, c-format
msgid "Advanced Options Help"
msgstr "Справка по расширенным параметрам"

#: standalone/draknfs:389
#, c-format
msgid "NFS directory"
msgstr "Каталог NFS"

#: standalone/draknfs:391 standalone/draksambashare:594
#: standalone/draksambashare:773
#, c-format
msgid "Directory:"
msgstr "Каталог:"

#: standalone/draknfs:394
#, c-format
msgid "Host access"
msgstr "Доступ хосту"

#: standalone/draknfs:396
#, c-format
msgid "Access:"
msgstr "Доступ:"

#: standalone/draknfs:396
#, c-format
msgid "Hosts Access"
msgstr "Доступ хостам"

#: standalone/draknfs:399
#, c-format
msgid "User ID Mapping"
msgstr "Отображение пользовательских ID"

#: standalone/draknfs:401
#, c-format
msgid "User ID:"
msgstr "ID пользователя:"

#: standalone/draknfs:401
#, c-format
msgid "Help User ID"
msgstr "Справка по ID пользователя"

#: standalone/draknfs:402
#, c-format
msgid "Anonymous user ID:"
msgstr "ID пользователя anonymous:"

#: standalone/draknfs:403
#, c-format
msgid "Anonymous Group ID:"
msgstr "ID группы anonymous:"

#: standalone/draknfs:444
#, c-format
msgid "Can't create this directory."
msgstr "Не могу создать этот каталог."

#: standalone/draknfs:447
#, c-format
msgid "You must specify hosts access."
msgstr "Вы должны указать доступ хостов."

#: standalone/draknfs:527
#, c-format
msgid "Share Directory"
msgstr "Разделяемый каталог"

#: standalone/draknfs:527
#, c-format
msgid "Hosts Wildcard"
msgstr "Шаблоны хостов"

#: standalone/draknfs:527
#, c-format
msgid "General Options"
msgstr "Общие параметры"

#: standalone/draknfs:527
#, c-format
msgid "Custom Options"
msgstr "Дополнительные параметры"

#: standalone/draknfs:539 standalone/draksambashare:631
#: standalone/draksambashare:798
#, c-format
msgid "Please enter a directory to share."
msgstr "Пожалуйста введите каталог для общего доступа."

#: standalone/draknfs:546
#, c-format
msgid "Please use the modify button to set right access."
msgstr ""
"Пожалуйста используйте кнопку изменения чтобы прописать правильные права "
"доступа."

#: standalone/draknfs:600
#, c-format
msgid "DrakNFS manage NFS shares"
msgstr "DrakNFS управляет ресурсами NFS"

#: standalone/draknfs:609
#, c-format
msgid "Failed to add NFS share."
msgstr "Не удалось добавить NFS ресурс."

#: standalone/draknfs:616
#, c-format
msgid "Failed to Modify NFS share."
msgstr "Не удалось изменить NFS ресурс."

#: standalone/draknfs:623
#, c-format
msgid "Failed to remove an NFS share."
msgstr "Не удалось удалить NFS ресурс."

#: standalone/drakperm:21
#, c-format
msgid "System settings"
msgstr "Системные настройки"

#: standalone/drakperm:22
#, c-format
msgid "Custom settings"
msgstr "Личные настройки"

#: standalone/drakperm:23
#, c-format
msgid "Custom & system settings"
msgstr "Личные и системные настройки"

#: standalone/drakperm:43
#, c-format
msgid "Editable"
msgstr "Редактируемый"

#: standalone/drakperm:48 standalone/drakperm:323
#: standalone/draksambashare:101
#, c-format
msgid "Path"
msgstr "Путь"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "User"
msgstr "Пользователь"

#: standalone/drakperm:48 standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "Группа"

#: standalone/drakperm:48 standalone/drakperm:335
#, c-format
msgid "Permissions"
msgstr "Права"

#: standalone/drakperm:57
#, c-format
msgid "Add a new rule"
msgstr "Добавить новое правило"

#: standalone/drakperm:64 standalone/drakperm:99 standalone/drakperm:124
#, c-format
msgid "Edit current rule"
msgstr "Редактировать текущее правило"

#: standalone/drakperm:106
#, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and "
"groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Здесь вы можете просмотреть использующиеся файлы с целью исправления прав, "
"владельцев и групп при помощи msec.\n"
"Вы также можете редактировать свои собственные правила, которые перезапишут "
"правила по умолчанию."

#: standalone/drakperm:109
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""
"Текущий уровень безопасности: %s.\n"
"Выберите права для просмотра/редактирования"

#: standalone/drakperm:120
#, c-format
msgid "Up"
msgstr "Вверх"

#: standalone/drakperm:120
#, c-format
msgid "Move selected rule up one level"
msgstr "Переместить выбранное правило на один уровень вверх"

#: standalone/drakperm:121
#, c-format
msgid "Down"
msgstr "Вниз"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule down one level"
msgstr "Переместить выбранное правило на один уровень вниз"

#: standalone/drakperm:122
#, c-format
msgid "Add a rule"
msgstr "Добавить правило"

#: standalone/drakperm:122
#, c-format
msgid "Add a new rule at the end"
msgstr "Добавить новое правило в конец"

#: standalone/drakperm:123
#, c-format
msgid "Delete selected rule"
msgstr "Удалить выбранное правило"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "найти"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "пользователь"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "группа"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "другие"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "Чтение"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr "Разрешить \"%s\" читать файл"

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "Запись"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr "Разрешить \"%s\" записывать файл"

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "Выполнить"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr "Включить \"%s\" для выполнения файла"

#: standalone/drakperm:272
#, c-format
msgid "Sticky-bit"
msgstr "Закрепляющий бит"

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"Используется для каталога:\n"
" только владелец каталога или файла в этом каталоге может удалить его"

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr "Использовать id владельца для выполнения"

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr "Использовать id группы для выполнения"

#: standalone/drakperm:292 standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "Пользователь:"

#: standalone/drakperm:294
#, c-format
msgid "Group:"
msgstr "Группа:"

#: standalone/drakperm:298
#, c-format
msgid "Current user"
msgstr "Текущий пользователь"

#: standalone/drakperm:299
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr "Если отмечен, владелец и группа не будут изменены"

#: standalone/drakperm:309
#, c-format
msgid "Path selection"
msgstr "Выбор пути"

#: standalone/drakperm:329
#, c-format
msgid "Property"
msgstr "Собственность"

#: standalone/drakperm:380
#, c-format
msgid ""
"The first character of the path must be a slash (\"/\"):\n"
"\"%s\""
msgstr ""
"Первым символом пути должна быть косая черта (\"/\"):\n"
"\"%s\""

#: standalone/drakperm:390
#, c-format
msgid "Both the username and the group must valid!"
msgstr "И имя, и группа должны быть действительными!"

#: standalone/drakperm:391
#, c-format
msgid "User: %s"
msgstr "Пользователь: %s"

#: standalone/drakperm:392
#, c-format
msgid "Group: %s"
msgstr "Группа: %s"

#: standalone/drakroam:33
#, c-format
msgid ""
"You do not have any wireless interface.\n"
"Run the \"%s\" assistant from the Mandriva Linux Control Center"
msgstr ""
"У вас нет ни одного беспроводного интерфейса.\n"
"Запустите помощник \"%s\" из Центра управления Mandriva Linux"

#: standalone/drakroam:48
#, c-format
msgid "SSID"
msgstr "SSID"

#: standalone/drakroam:49
#, c-format
msgid "Signal strength"
msgstr "Мощность сигнала"

#: standalone/drakroam:51
#, c-format
msgid "Encryption"
msgstr "Шифрование"

#: standalone/drakroam:112
#, c-format
msgid "Please enter settings for wireless network \"%s\""
msgstr "Пожалуйста, введите параметры беспроводной сети \"%s\""

#: standalone/drakroam:123
#, c-format
msgid "DNS server"
msgstr "Сервер DNS"

#: standalone/drakroam:228
#, c-format
msgid "Connect"
msgstr "Подключиться"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakroam:229 standalone/printerdrake:251
#, c-format
msgid "Refresh"
msgstr "Обновить"

#: standalone/draksambashare:68
#, c-format
msgid "Share directory"
msgstr "Каталог совместного доступа"

#: standalone/draksambashare:69 standalone/draksambashare:102
#, c-format
msgid "Comment"
msgstr "Комментарий"

#: standalone/draksambashare:70 standalone/draksambashare:103
#, c-format
msgid "Browseable"
msgstr "Можно просматривать"

#: standalone/draksambashare:71
#, c-format
msgid "Public"
msgstr "Общедоступный"

#: standalone/draksambashare:72 standalone/draksambashare:108
#, c-format
msgid "Writable"
msgstr "Доступен на запись"

#: standalone/draksambashare:73 standalone/draksambashare:149
#, c-format
msgid "Create mask"
msgstr "Создать маску"

#: standalone/draksambashare:74 standalone/draksambashare:150
#, c-format
msgid "Directory mask"
msgstr "Маска каталога"

#: standalone/draksambashare:75
#, c-format
msgid "Read list"
msgstr "Чтение списка"

#: standalone/draksambashare:76 standalone/draksambashare:109
#: standalone/draksambashare:608
#, c-format
msgid "Write list"
msgstr "Запись списка"

#: standalone/draksambashare:77 standalone/draksambashare:141
#, c-format
msgid "Admin users"
msgstr "Управление пользователями"

#: standalone/draksambashare:78 standalone/draksambashare:142
#, c-format
msgid "Valid users"
msgstr "Проверка пользователей"

#: standalone/draksambashare:79
#, c-format
msgid "Inherit Permissions"
msgstr "Передача прав"

#: standalone/draksambashare:80 standalone/draksambashare:143
#, c-format
msgid "Hide dot files"
msgstr "Скрыть файлы с точкой"

#: standalone/draksambashare:82 standalone/draksambashare:148
#, c-format
msgid "Preserve case"
msgstr "Сохранять регистр"

#: standalone/draksambashare:83
#, c-format
msgid "Force create mode"
msgstr "Принудительно создавать режим"

#: standalone/draksambashare:84
#, c-format
msgid "Force group"
msgstr "Навязывать группу"

#: standalone/draksambashare:85 standalone/draksambashare:147
#, c-format
msgid "Default case"
msgstr "Регистр по умолчанию"

#: standalone/draksambashare:100
#, c-format
msgid "Printer name"
msgstr "Имя принтера"

#: standalone/draksambashare:104 standalone/draksambashare:600
#, c-format
msgid "Printable"
msgstr "Доступный для печати"

#: standalone/draksambashare:105
#, c-format
msgid "Print Command"
msgstr "Команда печати"

#: standalone/draksambashare:106
#, c-format
msgid "LPQ command"
msgstr "Команда LPQ"

#: standalone/draksambashare:107
#, c-format
msgid "Guest ok"
msgstr "Гостям можно"

#: standalone/draksambashare:110 standalone/draksambashare:151
#: standalone/draksambashare:609
#, c-format
msgid "Inherit permissions"
msgstr "Наследовать права"

#: standalone/draksambashare:112
#, c-format
msgid "Create mode"
msgstr "Режим создания"

#: standalone/draksambashare:113
#, c-format
msgid "Use client driver"
msgstr "Использовать драйвер клиента"

#: standalone/draksambashare:139
#, c-format
msgid "Read List"
msgstr "Чтение списка"

#: standalone/draksambashare:140
#, c-format
msgid "Write List"
msgstr "Запись списка"

#: standalone/draksambashare:145
#, c-format
msgid "Force Group"
msgstr "Форсировать группу"

#: standalone/draksambashare:146
#, c-format
msgid "Force create group"
msgstr "Форсировать создание группы"

#: standalone/draksambashare:166
#, c-format
msgid "About Draksambashare"
msgstr "О Draksambashare"

#: standalone/draksambashare:166
#, c-format
msgid ""
"Mandriva Linux \n"
"Release: %s\n"
"Author: Antoine Ginies\n"
"\n"
"This is a simple tool to easily manage Samba configuration."
msgstr ""
"Mandriva Linux \n"
"Релиз: %s\n"
"Автор: Antoine Ginies\n"
"\n"
"Это простая утилита для управления настройкой Samba."

#: standalone/draksambashare:186
#, c-format
msgid "Samba server"
msgstr "Сервер Samba"

#: standalone/draksambashare:186
#, c-format
msgid "Restarting/Reloading Samba server..."
msgstr "Перезапуск сервера Samba..."

#: standalone/draksambashare:187
#, c-format
msgid "Error Restarting/Reloading Samba server"
msgstr "Ошибка перезапуска сервера Samba..."

#: standalone/draksambashare:373
#, c-format
msgid "Add a Samba share"
msgstr "Добавить ресурс Samba"

#: standalone/draksambashare:376
#, c-format
msgid "Goal of this wizard is to easily create a new Samba share."
msgstr "Цель этого мастера состоит в легком создании ресурсов Samba. "

#: standalone/draksambashare:378
#, c-format
msgid "Name of the share:"
msgstr "Название общего ресурса:"

#: standalone/draksambashare:379 standalone/draksambashare:593
#: standalone/draksambashare:774
#, c-format
msgid "Comment:"
msgstr "Комментарий:"

#: standalone/draksambashare:380
#, c-format
msgid "Path:"
msgstr "Путь:"

#: standalone/draksambashare:385
#, c-format
msgid ""
"Share with the same name already exist or share name empty, please choose "
"another name."
msgstr ""
"Ресурс с таким именем уже существует или пустое название ресурса, "
"пожалуйста, выберите другое имя."

#: standalone/draksambashare:389 standalone/draksambashare:395
#, c-format
msgid "Can't create the directory, please enter a correct path."
msgstr "Невозможно создать каталог, пожалуйста, укажите корректный путь."

#: standalone/draksambashare:392 standalone/draksambashare:629
#: standalone/draksambashare:796
#, c-format
msgid "Please enter a Comment for this share."
msgstr "Пожалуйста, введите комментарий для этого ресурса."

#: standalone/draksambashare:423
#, c-format
msgid ""
"The wizard successfully added the Samba share. Now just double click on it "
"in treeview to modify it"
msgstr ""
"Мастер успешно добавил ресурс Samba. Теперь дважды щёлкните по нему в "
"дереве, чтобы изменить его."

#: standalone/draksambashare:439
#, c-format
msgid "pdf-gen - a PDF generator"
msgstr "pdf-gen - генератор PDF"

#: standalone/draksambashare:440
#, c-format
msgid "printers - all printers available"
msgstr "printers - доступны все принтеры"

#: standalone/draksambashare:444
#, c-format
msgid "Add Special Printer share"
msgstr "Добавить специальный ресурс печати"

#: standalone/draksambashare:447
#, c-format
msgid ""
"Goal of this wizard is to easily create a new special printer Samba share."
msgstr ""
"Целью этого мастера является простое создание нового специального ресурса "
"печати Samba."

#: standalone/draksambashare:455
#, c-format
msgid "A PDF generator already exists."
msgstr "Генератор PDF уже существует."

#: standalone/draksambashare:479
#, c-format
msgid "Printers and print$ already exist."
msgstr "Printers и print$ уже существует."

#: standalone/draksambashare:530
#, c-format
msgid "The wizard successfully added the printer Samba share"
msgstr "Мастер успешно добавил ресурс печати Samba"

#: standalone/draksambashare:553
#, c-format
msgid "Please add or select a Samba printer share to be able to modify it."
msgstr ""
"Пожалуйста, добавьте или выберите ресурс печати Samba, чтобы изменить его."

#: standalone/draksambashare:589
#, c-format
msgid "Printer share"
msgstr "Ресурс печати"

#: standalone/draksambashare:592
#, c-format
msgid "Printer name:"
msgstr "Имя принтера:"

#: standalone/draksambashare:598 standalone/draksambashare:779
#, c-format
msgid "Writable:"
msgstr "Разрешена запись:"

#: standalone/draksambashare:599 standalone/draksambashare:780
#, c-format
msgid "Browseable:"
msgstr "Разрешён просмотр:"

#: standalone/draksambashare:604
#, c-format
msgid "Advanced options"
msgstr "Расширенные параметры"

#: standalone/draksambashare:606
#, c-format
msgid "Printer access"
msgstr "Доступ к принтеру"

#: standalone/draksambashare:610
#, c-format
msgid "Guest ok:"
msgstr "Гостевой доступ:"

#: standalone/draksambashare:611
#, c-format
msgid "Create mode:"
msgstr "Режим создания:"

#: standalone/draksambashare:615
#, c-format
msgid "Printer command"
msgstr "Команда принетра"

#: standalone/draksambashare:617
#, c-format
msgid "Print command:"
msgstr "Команда печати:"

#: standalone/draksambashare:618
#, c-format
msgid "LPQ command:"
msgstr "Команда LPQ:"

#: standalone/draksambashare:619
#, c-format
msgid "Printing:"
msgstr "Печать:"

#: standalone/draksambashare:635
#, c-format
msgid "create mode should be numeric. ie: 0755."
msgstr "режим создания должен быть числом. Пример: 0755."

#: standalone/draksambashare:697
#, c-format
msgid "DrakSamba entry"
msgstr "Пункт DrakSamba"

#: standalone/draksambashare:702
#, c-format
msgid "Please add or select a Samba share to be able to modify it."
msgstr "Пожалуйста, добавьте или выберите ресурс Samba, чтобы изменить его."

#: standalone/draksambashare:725
#, c-format
msgid "Samba user access"
msgstr "Доступ пользователя Samba"

#: standalone/draksambashare:733
#, c-format
msgid "Mask options"
msgstr "Параметры маски"

#: standalone/draksambashare:747
#, c-format
msgid "Display options"
msgstr "Параметры отображения"

#: standalone/draksambashare:769
#, c-format
msgid "Samba share directory"
msgstr "Каталог ресурса Samba"

#: standalone/draksambashare:772
#, c-format
msgid "Share name:"
msgstr "Имя общего ресурса:"

#: standalone/draksambashare:778
#, c-format
msgid "Public:"
msgstr "Общедоступный:"

#: standalone/draksambashare:802
#, c-format
msgid ""
"Create mask, create mode and directory mask should be numeric. ie: 0755."
msgstr ""
"Маска создания, режим создания и маска каталога должны быть числами. Пример: "
"0755."

#: standalone/draksambashare:809
#, c-format
msgid "Please create this Samba user: %s"
msgstr "Пожалуйста, создайте этого пользователя Samba: %s"

#: standalone/draksambashare:932
#, c-format
msgid "User information"
msgstr "Информация о пользователе"

#: standalone/draksambashare:934
#, c-format
msgid "User name:"
msgstr "Имя пользователя:"

#: standalone/draksambashare:935 standalone/harddrake2:601
#, c-format
msgid "Password:"
msgstr "Пароль:"

#: standalone/draksambashare:1135
#, c-format
msgid "Failed to add Samba share."
msgstr "Не удалось добавить ресурс Samba."

#: standalone/draksambashare:1144
#, c-format
msgid "Failed to Modify Samba share."
msgstr "Не удалось изменить ресурс Samba."

#: standalone/draksambashare:1153
#, c-format
msgid "Failed to remove a Samba share."
msgstr "Не удалось удалить ресурс Samba."

#: standalone/draksambashare:1160
#, c-format
msgid "File share"
msgstr "Общий доступ к файлам"

#: standalone/draksambashare:1168
#, c-format
msgid "Add printers"
msgstr "Добавить принтеры"

#: standalone/draksambashare:1174
#, c-format
msgid "Failed to add printers."
msgstr "Не удалось добавить принтеры."

#: standalone/draksambashare:1183
#, c-format
msgid "Failed to Modify."
msgstr "Не удалось изменить."

#: standalone/draksambashare:1192
#, c-format
msgid "Failed to remove."
msgstr "Не удалось удалить."

#: standalone/draksambashare:1199
#, c-format
msgid "Printers"
msgstr "Принтеры"

#: standalone/draksambashare:1207
#, c-format
msgid "Change password"
msgstr "Изменить пароль"

#: standalone/draksambashare:1212
#, c-format
msgid "Failed to change user password."
msgstr "Не удалось изменить пароль пользователя."

#: standalone/draksambashare:1220
#, c-format
msgid "Failed to add user."
msgstr "Не удалось добавить пользователя."

#: standalone/draksambashare:1223
#, c-format
msgid "Delete user"
msgstr "Удалить пользователя"

#: standalone/draksambashare:1232
#, c-format
msgid "Failed to delete user."
msgstr "Не удалось удалить пользователя."

#: standalone/draksambashare:1244
#, c-format
msgid "Samba Users"
msgstr "Пользователи Samba"

#: standalone/draksambashare:1253
#, c-format
msgid "DrakSamba manage Samba shares"
msgstr "DrakSamba управляет общими ресурсами Samba"

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr "ВСЕ"

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr "ЛОКАЛЬНЫЕ"

#: standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "НИ ОДНОГО"

#: standalone/draksec:53 standalone/net_applet:480
#, c-format
msgid "Ignore"
msgstr "Игнорировать"

#. -PO: Do not alter the <span ..> and </span> tags.
#. -PO: Translate the security levels (Poor, Standard, High, Higher and Paranoid) in the same way, you translated these individuals words.
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX.
#: standalone/draksec:103
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who "
"will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a "
"username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select "
"one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</"
"span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive "
"server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
"very\n"
"easy to use security level. It should only be used for machines not "
"connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
"security\n"
"recommended for a computer that will be used to connect to the Internet as "
"a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
"enough\n"
"to use the system as a server which can accept connections from many "
"clients. If\n"
"your machine is only a client on the Internet, you should choose a lower "
"level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
"previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""
"Здесь вы можете настроить уровень безопасности и назначить администратора \n"
"для вашей машины\n"
"\n"
"\n"
"'<span weight=\"bold\">Администратор по безопасности </span>'это тот, кто "
"будет получать сообщения если\n"
"установлена опция '<span weight=\"bold\">Предупреждения по безопасности</"
"span>'. Здесь может быть\n"
"указано имя пользователя или email.\n"
"\n"
"\n"
"Меню '<span weight=\"bold\">Уровень безопасности</span>' позволяет выбрать "
"один из предусмотренных \n"
"вариантов безопасности, поставляемых с msec.\n"
"Здесь представлены уровни в диапазоне от '<span weight=\"bold\">Простого</"
"span>' и легкого в использовании\n"
"до '<span weight=\"bold\">Параноидального</span>' конфига, который подходит "
"для очень чувствительных\n"
"серверных приложений:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Простой</span>: Полностью незащищенный,\n"
"но очень простой уровень безопасности. Его можно использовать только на\n"
"машинах, не подключенных к сети и к которым никто не имеет доступа.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Стандартный</span>: Стандартный уровень\n"
"безопасности, рекомендованный для большинства машин, которые выходят в\n"
"Интернет в качестве клиентов.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Высокий</span>: Здесь имеется ряд \n"
"ограничений и больше автоматических проверок каждую ночь.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Повышенный</span>: На этом уровне\n"
" безопасность достаточна для использования системы в качестве сервера,\n"
"к которому производят подключения множество клиентов. Если ваша машина\n"
"является только клиентом в сети Интернет, вам следует избрать более низкий\n"
"уровень.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Параноидальный</span>: Этот уровень похож \n"
"предыдущий, однако система полностью закрыта и возможности защиты включены\n"
"на максимум"

#: standalone/draksec:156 standalone/harddrake2:208
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"Описание полей:\n"
"\n"

#: standalone/draksec:170
#, c-format
msgid "(default value: %s)"
msgstr "(значение по умолчанию: %s)"

#: standalone/draksec:212
#, c-format
msgid "Security Level:"
msgstr "Уровень безопасности:"

#: standalone/draksec:219
#, c-format
msgid "Security Administrator:"
msgstr "Администратор по безопасности:"

#: standalone/draksec:221
#, c-format
msgid "Basic options"
msgstr "Базовые опции"

#: standalone/draksec:235
#, c-format
msgid "Network Options"
msgstr "Сетевые опции"

#: standalone/draksec:235
#, c-format
msgid "System Options"
msgstr "Системные опции"

#: standalone/draksec:270
#, c-format
msgid "Periodic Checks"
msgstr "Периодические проверки"

#: standalone/draksec:300
#, c-format
msgid "Please wait, setting security level..."
msgstr "Подождите, пожалуйста, настраивается уровень безопасности..."

#: standalone/draksec:306
#, c-format
msgid "Please wait, setting security options..."
msgstr "Подождите, пожалуйста, настраиваются параметры безопасности..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "Звуковая карта не обнаружена!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-"
"supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""
"На вашей машине не обнаружена звуковая карта. Пожалуйста, проверьте, чтобы "
"поддерживаемая Linux'ом звуковая карта была хорошо вставлена в слот.\n"
"\n"
"\n"
"Вы можете заглянуть в нашу базу данных аппаратного обеспечения на:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/ru/hardware.php3"

#: standalone/draksound:57
#, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
"the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"Примечание: если у вас звуковая карта ISA PnP, вы должны использовать "
"программы alsaconf или sndconfig. Просто введите в консоли \"alsaconf\" или "
"\"sndconfig\"."

#: standalone/draksplash:30
#, c-format
msgid "x coordinate of text box"
msgstr "координата x текстового окна"

#: standalone/draksplash:31
#, c-format
msgid "y coordinate of text box"
msgstr "координата y текстового окна"

#: standalone/draksplash:32
#, c-format
msgid "text box width"
msgstr "ширина текстового окна"

#: standalone/draksplash:33
#, c-format
msgid "text box height"
msgstr "высота текстового окна"

#: standalone/draksplash:34
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"координата х индикатора выполнения\n"
"от верхнего левого угла"

#: standalone/draksplash:35
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr ""
"координата у индикатора выполнения\n"
"от верхнего левого угла"

#: standalone/draksplash:36
#, c-format
msgid "the width of the progress bar"
msgstr "ширина индикатора выполнения"

#: standalone/draksplash:37
#, c-format
msgid "the height of the progress bar"
msgstr "высота индикатора выполнения"

#: standalone/draksplash:38
#, c-format
msgid "x coordinate of the text"
msgstr "координата x текста"

#: standalone/draksplash:39
#, c-format
msgid "y coordinate of the text"
msgstr "координата y текста"

#: standalone/draksplash:40
#, c-format
msgid "text box transparency"
msgstr "прозрачность текстового окна"

#: standalone/draksplash:41
#, c-format
msgid "progress box transparency"
msgstr "прозрачность окна индикатора выполнения"

#: standalone/draksplash:42
#, c-format
msgid "text size"
msgstr "размер текста"

#: standalone/draksplash:59
#, c-format
msgid "Choose progress bar color 1"
msgstr "Выбрать цвет 1 индикатора выполнения"

#: standalone/draksplash:60
#, c-format
msgid "Choose progress bar color 2"
msgstr "Выбрать цвет 2 индикатора выполнения"

#: standalone/draksplash:61
#, c-format
msgid "Choose progress bar background"
msgstr "Выбрать фон индикатора выполнения"

#: standalone/draksplash:62
#, c-format
msgid "Gradient type"
msgstr "Тип градиента"

#: standalone/draksplash:63
#, c-format
msgid "Choose text color"
msgstr "Выбрать цвет текста"

#: standalone/draksplash:65 standalone/draksplash:72
#, c-format
msgid "Choose picture"
msgstr "Выбрать изображение"

#: standalone/draksplash:66
#, c-format
msgid "Silent bootsplash"
msgstr "Упрощённая загрузка"

#: standalone/draksplash:69
#, c-format
msgid "Choose text zone color"
msgstr "Выбрать цвет текстовой области"

#: standalone/draksplash:70
#, c-format
msgid "Text color"
msgstr "Цвет текста"

#: standalone/draksplash:71
#, c-format
msgid "Background color"
msgstr "Цвет фона"

#: standalone/draksplash:73
#, c-format
msgid "Verbose bootsplash"
msgstr "Подробная загрузка"

#: standalone/draksplash:75
#, c-format
msgid "Display logo on Console"
msgstr "Показывать логотип в консоли"

#: standalone/draksplash:78
#, c-format
msgid "Console bootsplash"
msgstr "Консольная загрузка"

#: standalone/draksplash:84
#, c-format
msgid "Theme name"
msgstr "Название темы"

#: standalone/draksplash:87
#, c-format
msgid "final resolution"
msgstr "Конечное разрешение"

#: standalone/draksplash:92
#, c-format
msgid "Save theme"
msgstr "Сохранить тему"

#: standalone/draksplash:153
#, c-format
msgid "saving Bootsplash theme..."
msgstr "сохраняется тема Bootsplash..."

#: standalone/draksplash:162
#, c-format
msgid "Unable to load image file %s"
msgstr "Невозможно загрузить файл изображения %s"

#: standalone/draksplash:173
#, c-format
msgid "choose image"
msgstr "Выбор изображения"

#: standalone/draksplash:188
#, c-format
msgid "Color selection"
msgstr "Выбор цвета"

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr "Подключен через последовательный порт или usb-кабель"

#: standalone/drakups:80
#, c-format
msgid "Add an UPS device"
msgstr "Добавить устройство UPS"

#: standalone/drakups:83
#, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"Добро пожаловать в утилиту настройки UPS.\n"
"\n"
"Здесь вы можете добавить новый UPS в вашу систему.\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to "
"manually select them?"
msgstr ""
"Мы собираемся добавить устройство UPS.\n"
"\n"
"Вы подключили к этой машине нужное устройство для автоопределения или ?"

#: standalone/drakups:93
#, c-format
msgid "Autodetection"
msgstr "Автоопределение"

#: standalone/drakups:101 standalone/harddrake2:376
#, c-format
msgid "Detection in progress"
msgstr "Выполняется определение"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr "Мастер успешно добавил следующие устройства UPS:"

#: standalone/drakups:123
#, c-format
msgid "No new UPS devices was found"
msgstr "Новых устройств UPS не найдено"

#: standalone/drakups:128 standalone/drakups:140
#, c-format
msgid "UPS driver configuration"
msgstr "Настройка драйвера UPS"

#: standalone/drakups:128
#, c-format
msgid "Please select your UPS model."
msgstr "Выбарите модель вашего UPS."

#: standalone/drakups:129
#, c-format
msgid "Manufacturer / Model:"
msgstr "Производитель / Модель:"

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""
"Мы настраиваем \"%s\" UPS из \"%s\".\n"
"Введите его название, драйвер и порт, пожалуйста."

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "Название:"

#: standalone/drakups:145
#, c-format
msgid "The name of your ups"
msgstr "Название вашего ups"

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr "Драйвер, управляющий вашим ups"

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "Порт:"

#: standalone/drakups:149
#, c-format
msgid "The port on which is connected your ups"
msgstr "Порт, к которому подключен ваш ups"

#: standalone/drakups:159
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr "Мастер успешно настроил новое устройство UPS %s."

#: standalone/drakups:250
#, c-format
msgid "UPS devices"
msgstr "UPS устройства"

#: standalone/drakups:251 standalone/drakups:270 standalone/drakups:286
#: standalone/harddrake2:85 standalone/harddrake2:111
#: standalone/harddrake2:118
#, c-format
msgid "Name"
msgstr "Имя"

#: standalone/drakups:269
#, c-format
msgid "UPS users"
msgstr "Пользователи UPS"

#: standalone/drakups:285
#, c-format
msgid "Access Control Lists"
msgstr "Списки управления доступом (Access Control Lists)"

#: standalone/drakups:286
#, c-format
msgid "IP mask"
msgstr "IP маска"

#: standalone/drakups:298
#, c-format
msgid "Rules"
msgstr "Правила"

#: standalone/drakups:299
#, c-format
msgid "Action"
msgstr "Действие"

#: standalone/drakups:299 standalone/drakvpn:1132 standalone/harddrake2:82
#, c-format
msgid "Level"
msgstr "Уровень"

#: standalone/drakups:299
#, c-format
msgid "ACL name"
msgstr "Имя ACL"

#: standalone/drakups:329 standalone/drakups:333 standalone/drakups:342
#, c-format
msgid "DrakUPS"
msgstr "DrakUPS"

#: standalone/drakups:339
#, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "Добро пожаловать в утилиты конфигурации UPS"

#: standalone/drakvpn:73
#, c-format
msgid "DrakVPN"
msgstr "DrakVPN"

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr "Соединение VPN разрешено."

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Установка VPN соединения уже была выполнена.\n"
"В данный момент оно включено.\n"
"\n"
"Что вы хотите сделать?"

#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "отключить"

#: standalone/drakvpn:101 standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "перенастроить"

#: standalone/drakvpn:101 standalone/drakvpn:127 standalone/drakvpn:362
#: standalone/drakvpn:721
#, c-format
msgid "dismiss"
msgstr "отменить"

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr "Отключается VPN..."

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr "VPN соединение теперь отключено."

#: standalone/drakvpn:121
#, c-format
msgid "VPN connection currently disabled"
msgstr "VPN соединение в настоящий момент выключено"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Настройка VPN соединения уже была выполнена.\n"
"В данный момент оно отключено.\n"
"\n"
"Что бы вы хотели сделать?"

#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "включить"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr "Включается VPN..."

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr "VPN соединение теперь включено."

#: standalone/drakvpn:155 standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr "Упрощенная настройка VPN."

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""
"Вы собираетесь настроить ваш компьютер на использование VPN соединения.\n"
"\n"
"Имея эту возможность, компьютеры вашей локальной сети смогут обмениваться\n"
"информацией с другими удаленными частными сетями через их собственные\n"
"файерволы, через Интернет, и все это в защищенном режиме.\n"
"\n"
"Сообщение через Интернет шифруется. Локальные и удаленные компьютеры видят\n"
"друг друга как будто они в одной и той же сети.\n"
"\n"
"Прежде чем продолжать, проверьте что у вас уже настроен доступ в Сеть/"
"Интернет\n"
"с помощью drakconnect."

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""
"VPN соединение.\n"
"\n"
"Данная программа базируется на следующих проектах:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - документация и man-страницы поставлены из пакета %s\n"
"\n"
"Советуем почитать КАК МИНИМУМ документацию ipsec-howto\n"
"прежде чем продолжать."

#: standalone/drakvpn:196
#, c-format
msgid "Kernel module."
msgstr "Модуль ядра."

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""
"Ядро должно поддерживать ipsec.\n"
"\n"
"У вас работает ядро версии %s.\n"
"\n"
"Данное ядро имеет поддержку '%s'."

#: standalone/drakvpn:264
#, c-format
msgid "Problems installing package %s"
msgstr "Проблемы при установке пакета %s"

#: standalone/drakvpn:278
#, c-format
msgid "Security Policies"
msgstr "Политика Безопасности"

#: standalone/drakvpn:278
#, c-format
msgid "IKE daemon racoon"
msgstr "IKE демон racoon"

#: standalone/drakvpn:281 standalone/drakvpn:292
#, c-format
msgid "Configuration file"
msgstr "Конфигурационный файл"

#: standalone/drakvpn:282
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""
"Шаг конфигурации !\n"
"\n"
"Вам нужно определить Политику Безопасности, затем настроить\n"
"демон автоматического обмена ключами (IKE)\n"
"Демон KAME IKE, который используем мы, называется 'racoon'.\n"
"\n"
"Что будем настраивать?\n"

#: standalone/drakvpn:293
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""
"Затем мы будем строить файл %s.\n"
"\n"
"\n"
"Просто кликните Далее.\n"

#: standalone/drakvpn:311 standalone/drakvpn:671
#, c-format
msgid "%s entries"
msgstr "%s записей"

#: standalone/drakvpn:312
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""
"Содержимое файла %s\n"
"разделено на две части.\n"
"\n"
"Теперь вы можете :\n"
"\n"
"  - промотреть, добавить, отредактировать или удалить разделы, и затем\n"
"  - принять изменения\n"
"\n"
"Что будем делать ?\n"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "Отобразить"

#: standalone/drakvpn:319 standalone/drakvpn:680
#, c-format
msgid "Commit"
msgstr "Принять"

#: standalone/drakvpn:333 standalone/drakvpn:337 standalone/drakvpn:695
#: standalone/drakvpn:699
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "Отобразить конфигурацию"

#: standalone/drakvpn:338
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""
"Файл %s не существует.\n"
"\n"
"Нужно создать новую конфигурацию.\n"
"\n"
"Вернитесь назад и выберите 'добавить'.\n"

#: standalone/drakvpn:354
#, c-format
msgid "ipsec.conf entries"
msgstr "записи ipsec.conf"

#: standalone/drakvpn:355
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""
"Файл %s состоит из различных частей.\n"
"\n"
"Вот его скелет :\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"Сейчас вы можете добавить одну из этих секций.\n"
"\n"
"Выберите какую секцию будем добавлять.\n"

#: standalone/drakvpn:362
#, c-format
msgid "config setup"
msgstr "настройка config"

#: standalone/drakvpn:362
#, c-format
msgid "conn %default"
msgstr "conn %default"

#: standalone/drakvpn:362
#, c-format
msgid "normal conn"
msgstr "normal conn"

#: standalone/drakvpn:368 standalone/drakvpn:409 standalone/drakvpn:496
#, c-format
msgid "Exists!"
msgstr "Существует !"

#: standalone/drakvpn:369 standalone/drakvpn:410
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""
"Секция с таким именем уже существует.\n"
"Название секции должно быть уникальным.\n"
"\n"
"Вернитесь назад и добавьте другую секцию\n"
"или измените ее название.\n"

#: standalone/drakvpn:386
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""
"Данная секция должна быть в начале вашего\n"
"файла %s .\n"
"\n"
"Сделайте так, чтобы все другие секции шли ниже этой \n"
"config setup секции.\n"
"\n"
"Когда закончите, выберите продолжать или вернуться.\n"

#: standalone/drakvpn:391
#, c-format
msgid "interfaces"
msgstr "интерфейсы"

#: standalone/drakvpn:392
#, c-format
msgid "klipsdebug"
msgstr "klipsdebug"

#: standalone/drakvpn:393
#, c-format
msgid "plutodebug"
msgstr "plutodebug"

#: standalone/drakvpn:394
#, c-format
msgid "plutoload"
msgstr "plutoload"

#: standalone/drakvpn:395
#, c-format
msgid "plutostart"
msgstr "plutostart"

#: standalone/drakvpn:396
#, c-format
msgid "uniqueids"
msgstr "uniqueids"

#: standalone/drakvpn:430
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""
"Это первая секция после установочной секции config\n"
"setup.\n"
"\n"
"Здесь вы определите установки по умолчанию. \n"
"Все остальные секции будут следовать за этой.\n"
"Настройки слева опциональны. Если вы их не определите\n"
"здесь, глобально, вы можете определить их для каждой\n"
"секции отдельно.\n"

#: standalone/drakvpn:437
#, c-format
msgid "PFS"
msgstr "PFS"

#: standalone/drakvpn:438
#, c-format
msgid "keyingtries"
msgstr "keyingtries"

#: standalone/drakvpn:439
#, c-format
msgid "compress"
msgstr "compress"

#: standalone/drakvpn:440
#, c-format
msgid "disablearrivalcheck"
msgstr "disablearrivalcheck"

#: standalone/drakvpn:441 standalone/drakvpn:480
#, c-format
msgid "left"
msgstr "left"

#: standalone/drakvpn:442 standalone/drakvpn:481
#, c-format
msgid "leftcert"
msgstr "leftcert"

#: standalone/drakvpn:443 standalone/drakvpn:482
#, c-format
msgid "leftrsasigkey"
msgstr "leftrsasigkey"

#: standalone/drakvpn:444 standalone/drakvpn:483
#, c-format
msgid "leftsubnet"
msgstr "leftsubnet"

#: standalone/drakvpn:445 standalone/drakvpn:484
#, c-format
msgid "leftnexthop"
msgstr "leftnexthop"

#: standalone/drakvpn:474
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Сейчас вы можете добавить новую секцию.\n"
"Когда закончите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:477
#, c-format
msgid "section name"
msgstr "название секции"

#: standalone/drakvpn:478
#, c-format
msgid "authby"
msgstr "authby"

#: standalone/drakvpn:479
#, c-format
msgid "auto"
msgstr "auto"

#: standalone/drakvpn:485
#, c-format
msgid "right"
msgstr "right"

#: standalone/drakvpn:486
#, c-format
msgid "rightcert"
msgstr "rightcert"

#: standalone/drakvpn:487
#, c-format
msgid "rightrsasigkey"
msgstr "rightrsasigkey"

#: standalone/drakvpn:488
#, c-format
msgid "rightsubnet"
msgstr "rightsubnet"

#: standalone/drakvpn:489
#, c-format
msgid "rightnexthop"
msgstr "rightnexthop"

#: standalone/drakvpn:497
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""
"Секция с таким именем уже существует.\n"
"Имя секции должно быть уникальным.\n"
"\n"
"Вернитесь назад и добавьте другую секцию\n"
"или смените имя секции.\n"

#: standalone/drakvpn:529
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Добавить Политику Безопасности.\n"
"\n"
"Добавьте сейчас Политику Безопасности.\n"
"\n"
"Когда завершите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:562 standalone/drakvpn:812
#, c-format
msgid "Edit section"
msgstr "Редактировать секцию"

#: standalone/drakvpn:563
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Выберите здесь что именно будете редактировать и\n"
"нажмите далее.\n"

#: standalone/drakvpn:566 standalone/drakvpn:646 standalone/drakvpn:817
#: standalone/drakvpn:863
#, c-format
msgid "Section names"
msgstr "Названия секций"

#: standalone/drakvpn:576
#, c-format
msgid "Can not edit!"
msgstr "Не могу отредактировать !"

#: standalone/drakvpn:577
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""
"Данную секцию править нельзя.\n"
"\n"
"Она является обязательной для Freswan 2.X.\n"
"Она должна указывать версию 2.0 вверху\n"
"файла %s, и в конечном счете, включать или\n"
"отключать оппортунистическое шифрование.\n"

#: standalone/drakvpn:586
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Ваш файл %s содержит несколько секций.\n"
"\n"
"Сейчас вы можете отредактировать записи секции config setup.\n"
"Когда закончите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:597
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Сейчас вы можете отредактировать записи default секции.\n"
"Когда закончите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:610
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Сейчас вы можете отредактировать записи обычной (normal)секции.\n"
"Когда закончите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:631
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Редактирование Политики Безопасности.\n"
"\n"
"Сейчас вы можете добавить Политику Безопасности.\n"
"\n"
"Когда закончите, нажмите продолжить, чтобы записать данные.\n"

#: standalone/drakvpn:642 standalone/drakvpn:859
#, c-format
msgid "Remove section"
msgstr "Удалить секцию"

#: standalone/drakvpn:643 standalone/drakvpn:860
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Вы можете выбрать ниже что желаете удалить и\n"
"нажать далее.\n"

#: standalone/drakvpn:672
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""
"Файл конфигурации racoon.conf.\n"
"\n"
"Содержимое данного файла разделено на две части.\n"
"Сейчас вы можете :\n"
"  - display \t\t (отобразить содержимое файла)\n"
"  - add\t\t\t (добавить одну секцию)\n"
"  - edit \t\t\t (изменить параметры существующей секции)\n"
"  - remove \t\t (удалить имеющуюся секцию)\n"
"  - commit \t\t (записать изменения в настоящий файл)"

#: standalone/drakvpn:700
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""
"Файл %s не существует\n"
"\n"
"Это должна быть новая конфигурация.\n"
"\n"
"Вернитесь назад и выберите настроить.\n"

#: standalone/drakvpn:714
#, c-format
msgid "racoonf.conf entries"
msgstr "записи racoonf.conf"

#: standalone/drakvpn:715
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""
"Шаг 'добавления' секции.\n"
"\n"
"Ниже приведен скелет файла racoon.conf :\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Выберите секцию, которую хотите добавить.\n"

#: standalone/drakvpn:721
#, c-format
msgid "path"
msgstr "path"

#: standalone/drakvpn:721
#, c-format
msgid "remote"
msgstr "remote"

#: standalone/drakvpn:721
#, c-format
msgid "sainfo"
msgstr "sainfo"

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""
"Шаг 'добавления path' секции.\n"
"\n"
"Секции path должны находиться вверху вашего файла racoon.conf.\n"
"\n"
"Наведите мышь на сертификат для получения онлайн-справки."

#: standalone/drakvpn:732
#, c-format
msgid "path type"
msgstr "тип path"

#: standalone/drakvpn:736
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""
"path include path : определяет путь для вложения файла\n"
"См. Включение файла.\n"
"\tПример: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file : указывает файл, содержащий\n"
"pre-shared ключ(и) для различных ID(s). См. Pre-shared key файл.\n"
"\tПример: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) будет искать этот каталог\n"
"если получен сертификат или запрос на сертификат.\n"
"\tПример: path certificate '/etc/cert' ;\n"
"\n"
"Включение файла: include file \n"
"можно включать другие конфигурационные файлы.\n"
"\tПример: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key файл : Pre-shared key файл определяет пару\n"
"идентификаторов и разделяемый секретный ключ, которые используются\n"
"в методе аутентификации Pre-shared key в фазе 1."

#: standalone/drakvpn:756 standalone/drakvpn:849
#, c-format
msgid "real file"
msgstr "реальный файл"

#: standalone/drakvpn:779
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""
"Проверьте чтобы у вас были секции path\n"
"в начале вашего файла racoon.conf.\n"
"\n"
"Сейчас вы можете выбрать удаленные настройки.\n"
"Нажмите продолжить или вернуться когда завершите.\n"

#: standalone/drakvpn:796
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""
"Проверьте чтобы у вас были секции path\n"
"в начале вашего файла %s.\n"
"\n"
"Сейчас вы можете выбрать sainfo настройки.\n"
"Нажмите продолжить или вернуться когда завершите.\n"

#: standalone/drakvpn:813
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""
"Ваш файл %s содержит несколько секций или соединений.\n"
"\n"
"Выберите в списке ниже то, что собираетесь редактировать\n"
"и нажмите продолжить.\n"

#: standalone/drakvpn:824
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""
"Ваш файл %s содержит несколько секций.\n"
"\n"
"\n"
"Сейчас вы можете отредактировать записи секции remote.\n"
"\n"
"Когда завершите, выберите продолжить чтобы записать данные.\n"

#: standalone/drakvpn:833
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""
"Ваш файл %s содержит несколько секций.\n"
"\n"
"Сейчас вы можете отредактировать записи секции sainfo.\n"
"\n"
"Когда завершите, выберите продолжить чтобы записать данные."

#: standalone/drakvpn:841
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""
"Данная секция должна находиться в начале вашего файла\n"
"%s.\n"
"\n"
"Проверьте, чтобы остальные секции шли после этих path\n"
"секций.\n"
"\n"
"Сейчас вы можете редактировать записи path.\n"
"\n"
"Когда завершите, выберите продолжить или вернуться.\n"

#: standalone/drakvpn:848
#, c-format
msgid "path_type"
msgstr "path_type"

#: standalone/drakvpn:889
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""
"Все было настроено.\n"
"\n"
"Теперь вы можете совместно использовать ресурсы Интернет\n"
"в безопасном режиме используя VPN соединение.\n"
"\n"
"Вам необходимо проверить что настроена секция\n"
"tunnels shorewall."

#: standalone/drakvpn:909
#, c-format
msgid "Sainfo source address"
msgstr "исходный адрес sainfo"

#: standalone/drakvpn:910
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"определяет параметры для IKE phase 2\n"
"(IPsec-SA создание).\n"
"\n"
"source_id и destination_id конструируются так:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Примеры : \n"
"\n"
"sainfo anonymous (принимает соединения отовсюду)\n"
"\tоставьте пустым если хотите использовать\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 это исходный адрес\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 это исходный адрес"

#: standalone/drakvpn:927
#, c-format
msgid "Sainfo source protocol"
msgstr "Исходный протокол sainfo"

#: standalone/drakvpn:928
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"определяет парамертры для IKE phase 2\n"
"(IPsec-SA основание).\n"
"\n"
"source_id и destination_id конструирутся так:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Примеры : \n"
"\n"
"sainfo anonymous (принимает подключения отовсюду)\n"
"\tоставьте пустым если желаете разрешить\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tпервый 'any' разрешает любой протокол для исходного адреса"

#: standalone/drakvpn:942
#, c-format
msgid "Sainfo destination address"
msgstr "адрес назначения sainfo"

#: standalone/drakvpn:943
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"определяет параметры для IKE phase 2\n"
"(IPsec-SA основание).\n"
"\n"
"source_id и destination_id конструируются так:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Примеры : \n"
"\n"
"sainfo anonymous (принимает соединения отовсюду)\n"
"\tоставьте пустым если хотите разрешить\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 это адрес назначения\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 это адрес назначения"

#: standalone/drakvpn:960
#, c-format
msgid "Sainfo destination protocol"
msgstr "Протокол назначения sainfo"

#: standalone/drakvpn:961
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"определяет параметры для IKE phase 2\n"
"(IPsec-SA основание).\n"
"\n"
"source_id и destination_id конструируются так:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Примеры : \n"
"\n"
"sainfo anonymous (принимает соединения отовсюду)\n"
"\tоставьте пустым если хотите разрешить\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tпоследнее 'any' разрешает любой протокол для адреса назначения"

#: standalone/drakvpn:975
#, c-format
msgid "PFS group"
msgstr "PFS группа"

#: standalone/drakvpn:977
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""
"определяет группу Diffie-Hellman потенцирований.\n"
"Если вам не нужен PFS тогда вы можете опустить эту директиву.\n"
"Будут приниматься любые предложения если вы ничего не определите.\n"
"группа может быть такой: modp768, modp1024, modp1536.\n"
"Или вы можете определить 1, 2, или 5 в качестве номера группы DH."

#: standalone/drakvpn:982
#, c-format
msgid "Lifetime number"
msgstr "число времени жизни"

#: standalone/drakvpn:983
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""
"определяет lifetime определенного времени, которое будет\n"
"предложено в переговорах phase 1. Будет приниматься любое\n"
"предложение и атрибуты не будут предлагаться удаленному концу\n"
"(peer) если вы их не определите.  Их можно указывать в\n"
"индивидуальном порядке в каждом предложении.\n"
"\n"
"Примеры : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"Итак, здесь номера lifetime это 1, 1, 30, 30, 60 и 12.\n"

#: standalone/drakvpn:999
#, c-format
msgid "Lifetime unit"
msgstr "Единица времени жизни"

#: standalone/drakvpn:1001
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
"'hour'.\n"
msgstr ""
"определяет lifetime определенного времени которое будет\n"
"предложено в переговорах phase 1. Будет приниматься любое\n"
"предложение и атрибуты не будут предлагаться удаленному концу\n"
"(peer) если вы их не определите.  Их можно указывать в\n"
"индивидуальном порядке в каждом предложении.\n"
"\n"
"Примеры : \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"Итак, здесь единицы lifetime это 'min', 'min', 'sec', 'sec', 'sec' и  "
"'hour'.\n"

#: standalone/drakvpn:1019
#, c-format
msgid "Authentication algorithm"
msgstr "Алгоритм аутентификации"

#: standalone/drakvpn:1021
#, c-format
msgid "Compression algorithm"
msgstr "Алгоритм сжатия"

#: standalone/drakvpn:1022
#, c-format
msgid "deflate"
msgstr "уменьшить"

#: standalone/drakvpn:1029
#, c-format
msgid "Remote"
msgstr "Удаленный"

#: standalone/drakvpn:1030
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""
"remote (address | anonymous) [[port]] { statements }\n"
"определяет параметры для IKE phase 1 для каждого удаленного узла.\n"
"Порт по умолчанию -  500.  Если anonymous определен, тогда\n"
"statements принимаются для всех узлов, которые не попадают под\n"
"любую другую удаленную директиву.\n"
"\n"
"Примеры : \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"

#: standalone/drakvpn:1038
#, c-format
msgid "Exchange mode"
msgstr "Режим обмена"

#: standalone/drakvpn:1040
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""
"определяет режим обмена для phase 1 когда racoon является\n"
"инициатором. Также это обозначает принимаемый режим обмена\n"
"когда racoon является отвечающим. Может быть определено несколько\n"
"режимов, разделенных запятыми. Все режимы принимаемые.\n"
"Первоый режим обмена racoon использует если он является\n"
"инициатором.\n"

#: standalone/drakvpn:1046
#, c-format
msgid "Generate policy"
msgstr "Создать политику"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "off"
msgstr "выключить"

#: standalone/drakvpn:1047 standalone/drakvpn:1063 standalone/drakvpn:1076
#, c-format
msgid "on"
msgstr "включить"

#: standalone/drakvpn:1048
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""
"Данная директива предназначена для того, кто отвечает.\n"
"Следовательно вы должны установить passive on чтобы\n"
"racoon(8) стал только отвечающим.  Если отвечающий не \n"
"имеет ни одной политики в SPD во время согласования \n"
"phase 2, и директива установлена в on, тогда racoon(8) \n"
"выберет первую заявку в полезной нагрузке SA от инициатора,\n"
"и создаст записи политики из заявки. Это полезно для\n"
"согласования с клиентом, который получает IP адрес динамически.\n"
"Заметим, что инициатором может быть установлена в SPD отвечающего\n"
"неподходящая политика. Таким образом другие соединения могут\n"
"не состояться если такие политики установлены из-за несоответствия\n"
"между инициатором и отвечающим.\n"
"Данная директива игнорируется в случае инициатора.\n"
"Значение по умолчанию это off."

#: standalone/drakvpn:1062
#, c-format
msgid "Passive"
msgstr "Пассивный"

#: standalone/drakvpn:1064
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""
"Если вы не хотите инициировать согласование, установите это\n"
"значение в on.  Значение по умолчанию - off.\n"
"Полезно для сервера."

#: standalone/drakvpn:1067
#, c-format
msgid "Certificate type"
msgstr "Тип сертификата"

#: standalone/drakvpn:1069
#, c-format
msgid "My certfile"
msgstr "Мой файл сертификата"

#: standalone/drakvpn:1070
#, c-format
msgid "Name of the certificate"
msgstr "Имя сертификата"

#: standalone/drakvpn:1071
#, c-format
msgid "My private key"
msgstr "Мой приватный ключ"

#: standalone/drakvpn:1072
#, c-format
msgid "Name of the private key"
msgstr "Имя приватного ключа"

#: standalone/drakvpn:1073
#, c-format
msgid "Peers certfile"
msgstr "файл сертификата узлов"

#: standalone/drakvpn:1074
#, c-format
msgid "Name of the peers certificate"
msgstr "Имя сертификата узлов"

#: standalone/drakvpn:1075
#, c-format
msgid "Verify cert"
msgstr "Проверить сертификат"

#: standalone/drakvpn:1077
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""
"Если вы по каким-либо причинам не хотите проверять сертификат\n"
"узла, установите значение в off(выключить). \n"
"Значение по умолчанию - on(включить)."

#: standalone/drakvpn:1079
#, c-format
msgid "My identifier"
msgstr "Мой идентификатор"

#: standalone/drakvpn:1080
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""
"указывает идентификатор посланный удаленному хосту и тип\n"
"для использования в переговорах phase 1.  address, FQDN,\n"
"user_fqdn, keyid и asn1dn могут использоваться как idtype.\n"
"они используются так:\n"
"\tmy_identifier address [address];\n"
"\t\tтип это IP адрес. Это тип по умолчанию\n"
"\t\tесли вы не определяете идентификатор для использования.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tтип это USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tтип это FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tтип это KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tтип это ASN.1 известное имя. Если строка\n"
"\t\tпропускается, racoon(8) будет брать DN из\n"
"\t\tполя Subject сертификата.\n"
"\n"
"Примеры : \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""

#: standalone/drakvpn:1100
#, c-format
msgid "Peers identifier"
msgstr "Идентификатор узлов"

#: standalone/drakvpn:1101
#, c-format
msgid "Proposal"
msgstr "Предложение"

#: standalone/drakvpn:1103
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""
"указывает алгоритм шифрования для переговоров phase 1.\n"
"Данная директива должна быть определена. \n"
"алгоритм один из следующих: \n"
"\n"
"DES, 3DES, blowfish, cast128 для oakley.\n"
"\n"
"Для других преобразований это утверждение не должно использоваться."

#: standalone/drakvpn:1110
#, c-format
msgid "Hash algorithm"
msgstr "Алгоритм hash "

#: standalone/drakvpn:1112
#, c-format
msgid "DH group"
msgstr "DH группа"

#: standalone/drakvpn:1119
#, c-format
msgid "Command"
msgstr "Команда"

#: standalone/drakvpn:1120
#, c-format
msgid "Source IP range"
msgstr "Диапазон исходных IP"

#: standalone/drakvpn:1121
#, c-format
msgid "Destination IP range"
msgstr "Диапазон IP назначения"

#: standalone/drakvpn:1122
#, c-format
msgid "Upper-layer protocol"
msgstr "Upper-layer протокол"

#: standalone/drakvpn:1122 standalone/drakvpn:1129
#, c-format
msgid "any"
msgstr "любой"

#: standalone/drakvpn:1124
#, c-format
msgid "Flag"
msgstr "Флаг"

#: standalone/drakvpn:1125
#, c-format
msgid "Direction"
msgstr "Направление"

#: standalone/drakvpn:1126
#, c-format
msgid "IPsec policy"
msgstr "Политика IPsec"

#: standalone/drakvpn:1126
#, c-format
msgid "ipsec"
msgstr "ipsec"

#: standalone/drakvpn:1126
#, c-format
msgid "discard"
msgstr "сбросить"

#: standalone/drakvpn:1129
#, c-format
msgid "Mode"
msgstr "Режим"

#: standalone/drakvpn:1129
#, c-format
msgid "tunnel"
msgstr "тоннель"

#: standalone/drakvpn:1129
#, c-format
msgid "transport"
msgstr "транспорт"

#: standalone/drakvpn:1131
#, c-format
msgid "Source/destination"
msgstr "Source/destination"

#: standalone/drakvpn:1132
#, c-format
msgid "require"
msgstr "требовать"

#: standalone/drakvpn:1132
#, c-format
msgid "default"
msgstr "по умолчанию"

#: standalone/drakvpn:1132
#, c-format
msgid "use"
msgstr "использовать"

#: standalone/drakvpn:1132
#, c-format
msgid "unique"
msgstr "уникальный"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "США (широкое вещание)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "США (кабель)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr "США (hrc-кабель)"

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "Канада (кабель)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "Япония (широкое вещание)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "Япония (кабель)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "Китай (широкое вещание)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "Западная Европа"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "Восточная Европа"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "Франция [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "Новая Зеландия"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr "Австралийское кабельное ТВ Optus"

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""
"Пожалуйста,\n"
"введите свой формат ТВ и страну"

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr "Формат ТВ :"

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "Территория"

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr "Выполняется сканирование ТВ-каналов..."

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr "Сканирование ТВ-каналов "

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "При сканировании ТВ-каналов произошла ошибка"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "Удачного дня!"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "Теперь вы можете запустить xawtv (в X Window!)!\n"

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr "ТВ-карта не обнаружена!"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-"
"supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"
msgstr ""
"На вашей машине не обнаружена ТВ-карта. Пожалуйста, проверьте, чтобы Linux-"
"совместимая Видео/ТВ-карта была хорошо вставлена.\n"
"\n"
"\n"
"Вы можете посетить нашу базу данных на:\n"
"\n"
"\n"
"http://www.mandrivalinux.com/en/hardware.php3"

#: standalone/harddrake2:25
#, c-format
msgid "Alternative drivers"
msgstr "Альтернативные драйверы"

#: standalone/harddrake2:26
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "список альтернативных драйверов для этой звуковой карты"

#: standalone/harddrake2:29
#, c-format
msgid ""
"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
"это физическая шина, к которой подключено устройство (напр.: PCI, USB, ...)"

#: standalone/harddrake2:31 standalone/harddrake2:146
#, c-format
msgid "Bus identification"
msgstr "Идентификация шины"

#: standalone/harddrake2:32
#, c-format
msgid ""
"- PCI and USB devices: this lists the vendor, device, subvendor and "
"subdevice PCI/USB ids"
msgstr ""
"- устройства PCI и USB : здесь перечислены производители, устройства, "
"вторичные производители и идентификаторы устройств PCI/USB"

#: standalone/harddrake2:35
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- устройства pci: это определяет PCI-слот, устройство и назначение карты\n"
"- устройства eide: устройство является подчиненным или ведущим устройством\n"
"- устройства scsi: идентификаторы шины scsi и устройства scsi"

#: standalone/harddrake2:38
#, c-format
msgid "Drive capacity"
msgstr "Емкость устройства"

#: standalone/harddrake2:38
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr "специальные возможности драйвера (умение выжигать или поддержка DVD)"

#: standalone/harddrake2:39
#, c-format
msgid "this field describes the device"
msgstr "это поле описывает устройство"

#: standalone/harddrake2:40
#, c-format
msgid "Old device file"
msgstr "Файл старого устройства"

#: standalone/harddrake2:41
#, c-format
msgid "old static device name used in dev package"
msgstr "в пакете dev используется имя старого статического устройства"

#: standalone/harddrake2:42
#, c-format
msgid "New devfs device"
msgstr "Новое устройство devfs"

#: standalone/harddrake2:43
#, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "ядром devfs сгенерировано имя нового динамического устройства"

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:46
#, c-format
msgid "Module"
msgstr "Модуль"

#: standalone/harddrake2:46
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "модуль ядра GNU/Linux, управляющий этим устройством"

#: standalone/harddrake2:47
#, c-format
msgid "Extended partitions"
msgstr "Разделы Extended"

#: standalone/harddrake2:47
#, c-format
msgid "the number of extended partitions"
msgstr "число extended разделов"

#: standalone/harddrake2:48
#, c-format
msgid "Geometry"
msgstr "Геометрия"

#: standalone/harddrake2:48
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr "Цилиндр/голова/сектора геометрии диска"

#: standalone/harddrake2:49
#, c-format
msgid "Disk controller"
msgstr "Контроллер диска"

#: standalone/harddrake2:49
#, c-format
msgid "the disk controller on the host side"
msgstr "контроллер диска на стороне хоста"

#: standalone/harddrake2:50
#, c-format
msgid "class of hardware device"
msgstr "класс устройства"

#: standalone/harddrake2:51 standalone/harddrake2:83
#: standalone/printerdrake:224
#, c-format
msgid "Model"
msgstr "Модель"

#: standalone/harddrake2:51
#, c-format
msgid "hard disk model"
msgstr "модель жесткого диска"

#: standalone/harddrake2:52
#, c-format
msgid "network printer port"
msgstr "порт сетевого принтера"

#: standalone/harddrake2:53
#, c-format
msgid "Primary partitions"
msgstr "Разделы Primary"

#: standalone/harddrake2:53
#, c-format
msgid "the number of the primary partitions"
msgstr "количество первичных разделов"

#: standalone/harddrake2:54
#, c-format
msgid "the vendor name of the device"
msgstr "имя производителя устройства"

#: standalone/harddrake2:55
#, c-format
msgid "Bus PCI #"
msgstr "Шина PCI #"

#: standalone/harddrake2:55
#, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "PCI шина, к которой подключено устройство"

#: standalone/harddrake2:56
#, c-format
msgid "PCI device #"
msgstr "PCI устройство #"

#: standalone/harddrake2:56
#, c-format
msgid "PCI device number"
msgstr "номер PCI устройства"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function #"
msgstr "PCI функция #"

#: standalone/harddrake2:57
#, c-format
msgid "PCI function number"
msgstr "Номер PCI функции"

#: standalone/harddrake2:58
#, c-format
msgid "Vendor ID"
msgstr "ID производителя"

#: standalone/harddrake2:58
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr "это стандартный численный идентификатор производителя"

#: standalone/harddrake2:59
#, c-format
msgid "Device ID"
msgstr "ID устройства"

#: standalone/harddrake2:59
#, c-format
msgid "this is the numerical identifier of the device"
msgstr "это числовой идентификатор устройства"

#: standalone/harddrake2:60
#, c-format
msgid "Sub vendor ID"
msgstr "Sub ID производителя"

#: standalone/harddrake2:60
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr "это младший числовой идентификатор производителя"

#: standalone/harddrake2:61
#, c-format
msgid "Sub device ID"
msgstr "ID под-устройства"

#: standalone/harddrake2:61
#, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "это вторичный числовой идентификатор устройства"

#: standalone/harddrake2:62
#, c-format
msgid "Device USB ID"
msgstr "ID USB устройства"

#: standalone/harddrake2:62
#, c-format
msgid ".."
msgstr ".."

#: standalone/harddrake2:66
#, c-format
msgid "Bogomips"
msgstr "Bogomips"

#: standalone/harddrake2:66
#, c-format
msgid ""
"the GNU/Linux kernel needs to run a calculation loop at boot time to "
"initialize a timer counter.  Its result is stored as bogomips as a way to "
"\"benchmark\" the cpu."
msgstr ""
"ядру GNU/Linux необходимо выполнить расчетный цикл во время загрузки, чтобы "
"проинициализировать счетчик времени. Этот результат сохраняется как "
"bogomips, представляющий собой что-то вроде \"производительности\" "
"процессора."

#: standalone/harddrake2:67
#, c-format
msgid "Cache size"
msgstr "Размер кэша"

#: standalone/harddrake2:67
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "размер кэша (второго уровня) процессора"

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:70
#, c-format
msgid "Coma bug"
msgstr "Coma ошибка"

#: standalone/harddrake2:70
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr "имеет ли этот процессор ошибку запятой Cyrix 6x86"

#: standalone/harddrake2:71
#, c-format
msgid "Cpuid family"
msgstr "Семейство cpuid"

#: standalone/harddrake2:71
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "семейство процессоров (напр.: 6 для класса i686)"

#: standalone/harddrake2:72
#, c-format
msgid "Cpuid level"
msgstr "Уровень cpuid"

#: standalone/harddrake2:72
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr "уровень информации, который может быть получен через инструкцию cpuid"

#: standalone/harddrake2:73
#, c-format
msgid "Frequency (MHz)"
msgstr "Частота (МГц)"

#: standalone/harddrake2:73
#, c-format
msgid ""
"the CPU frequency in MHz (Megahertz which in first approximation may be "
"coarsely assimilated to number of instructions the cpu is able to execute "
"per second)"
msgstr ""
"частота CPU в MHz (мегагерцах, которые в первом приближении могут быть грубо "
"приравнены к числу выполняемых процессором инструкций в секунду)"

#: standalone/harddrake2:74
#, c-format
msgid "Flags"
msgstr "Флаги"

#: standalone/harddrake2:74
#, c-format
msgid "CPU flags reported by the kernel"
msgstr "Флаги процессора, выданные ядром"

#: standalone/harddrake2:75
#, c-format
msgid "Fdiv bug"
msgstr "Ошибка Fdiv"

#: standalone/harddrake2:76
#, c-format
msgid ""
"Early Intel Pentium chips manufactured have a bug in their floating point "
"processor which did not achieve the required precision when performing a "
"Floating point DIVision (FDIV)"
msgstr ""
"Выпущенные ранее чипы Intel Pentium имеют ошибку в узле вычислений с "
"плавающей точкой, который не достиг требуемой точности при выполнении "
"деления с плавающей точкой (FDIV)"

#: standalone/harddrake2:77
#, c-format
msgid "Is FPU present"
msgstr "Имеется ли FPU"

#: standalone/harddrake2:77
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr "да означает, что процессор имеет арифметический сопроцессор"

#: standalone/harddrake2:78
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr "Имеет ли FPU вектор прерываний"

#: standalone/harddrake2:78
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
"да означает, что арифметический сопроцессор имеет встроенный вектор "
"исключительных операций"

#: standalone/harddrake2:79
#, c-format
msgid "F00f bug"
msgstr "Ошибка F00f"

#: standalone/harddrake2:79
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
"раньше Pentium-ы имели ошибки и зависали при декодировании байт-кода F00F"

#: standalone/harddrake2:80
#, c-format
msgid "Halt bug"
msgstr "Ошибка Halt"

#: standalone/harddrake2:81
#, c-format
msgid ""
"Some of the early i486DX-100 chips cannot reliably return to operating mode "
"after the \"halt\" instruction is used"
msgstr ""
"Некоторые из ранних чипов i486DX-100 не могли точно возвращаться в рабочий "
"режим после использования инструкции \"halt\""

#: standalone/harddrake2:82
#, c-format
msgid "sub generation of the cpu"
msgstr "поколение процессора"

#: standalone/harddrake2:83
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr "поколение процессора (напр.: 8 для PentuimIII, ...)"

#: standalone/harddrake2:84
#, c-format
msgid "Model name"
msgstr "Имя модели"

#: standalone/harddrake2:84
#, c-format
msgid "official vendor name of the cpu"
msgstr "официальный производитель процессора"

#: standalone/harddrake2:85
#, c-format
msgid "the name of the CPU"
msgstr "название CPU"

#: standalone/harddrake2:86
#, c-format
msgid "Processor ID"
msgstr "ID процессора"

#: standalone/harddrake2:86
#, c-format
msgid "the number of the processor"
msgstr "номер процессора"

#: standalone/harddrake2:87
#, c-format
msgid "Model stepping"
msgstr "Stepping модели"

#: standalone/harddrake2:87
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr "stepping процессора (номер (поколение) модели)"

#: standalone/harddrake2:88
#, c-format
msgid "the vendor name of the processor"
msgstr "имя производителя процессора"

#: standalone/harddrake2:89
#, c-format
msgid "Write protection"
msgstr "Защита от записи"

#: standalone/harddrake2:89
#, c-format
msgid ""
"the WP flag in the CR0 register of the cpu enforce write protection at the "
"memory page level, thus enabling the processor to prevent unchecked kernel "
"accesses to user memory (aka this is a bug guard)"
msgstr ""
"флаг WP в регистре CR0 процессора приводит к защите от записи на уровне "
"страниц памяти, что позволяет процессору предотвратить непроверенные доступы "
"ядра к пользовательской памяти (aka защита от багов)"

#: standalone/harddrake2:93
#, c-format
msgid "Floppy format"
msgstr "Формат дискет"

#: standalone/harddrake2:93
#, c-format
msgid "format of floppies supported by the drive"
msgstr "формат дискет, поддерживаемый дисководом"

#: standalone/harddrake2:97
#, c-format
msgid "Channel"
msgstr "Канал"

#: standalone/harddrake2:97
#, c-format
msgid "EIDE/SCSI channel"
msgstr "Канал EIDE/SCSI"

#: standalone/harddrake2:98
#, c-format
msgid "Disk identifier"
msgstr "Идентификатор диска"

#: standalone/harddrake2:98
#, c-format
msgid "usually the disk serial number"
msgstr "обычно серийный номер диска"

#: standalone/harddrake2:99
#, c-format
msgid "Logical unit number"
msgstr "Номер логического юнита"

#: standalone/harddrake2:99
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely "
"identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""
"номер SCSI цели (LUN). SCSI устройства, подключенные к хосту "
"идентифицируются уникальным образом\n"
" по номеру канала, id цели и логическому номеру юнита"

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:106
#, c-format
msgid "Installed size"
msgstr "Установленный размер"

#: standalone/harddrake2:106
#, c-format
msgid "Installed size of the memory bank"
msgstr "Установленный размер банка памяти"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled Size"
msgstr "Разрешенный размер"

#: standalone/harddrake2:107
#, c-format
msgid "Enabled size of the memory bank"
msgstr "Разрешенный размер банка памяти"

#: standalone/harddrake2:108
#, c-format
msgid "type of the memory device"
msgstr "тип устройства памяти"

#: standalone/harddrake2:109
#, c-format
msgid "Speed"
msgstr "Скорость"

#: standalone/harddrake2:109
#, c-format
msgid "Speed of the memory bank"
msgstr "Скорость банка памяти"

#: standalone/harddrake2:110
#, c-format
msgid "Bank connections"
msgstr "Соединения банка"

#: standalone/harddrake2:111
#, c-format
msgid "Socket designation of the memory bank"
msgstr "Назначение сокета для банка памяти"

#: standalone/harddrake2:115
#, c-format
msgid "Device file"
msgstr "Файл устройства"

#: standalone/harddrake2:115
#, c-format
msgid ""
"the device file used to communicate with the kernel driver for the mouse"
msgstr "файл устройства используется для общения с драйвером ядра для мыши"

#: standalone/harddrake2:116
#, c-format
msgid "Emulated wheel"
msgstr "Эмуляция колесика"

#: standalone/harddrake2:116
#, c-format
msgid "whether the wheel is emulated or not"
msgstr "с эмуляцией колесика или нет"

#: standalone/harddrake2:117
#, c-format
msgid "the type of the mouse"
msgstr "тип мыши"

#: standalone/harddrake2:118
#, c-format
msgid "the name of the mouse"
msgstr "название мыши"

#: standalone/harddrake2:119
#, c-format
msgid "Number of buttons"
msgstr "Количество кнопок"

#: standalone/harddrake2:119
#, c-format
msgid "the number of buttons the mouse has"
msgstr "количество кнопок, имеющихся у мыши"

#: standalone/harddrake2:120
#, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "тип шины, к которой подключена мышь"

#: standalone/harddrake2:121
#, c-format
msgid "Mouse protocol used by X11"
msgstr "Протокол мыши, используемый X11"

#: standalone/harddrake2:121
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr "протокол, который использует графический десктоп для мыши"

#: standalone/harddrake2:128 standalone/harddrake2:137
#: standalone/harddrake2:144 standalone/harddrake2:152
#: standalone/harddrake2:342
#, c-format
msgid "Identification"
msgstr "Идентификация"

#: standalone/harddrake2:129 standalone/harddrake2:145
#, c-format
msgid "Connection"
msgstr "Соединение"

#: standalone/harddrake2:138
#, c-format
msgid "Performances"
msgstr "Производительность"

#: standalone/harddrake2:139
#, c-format
msgid "Bugs"
msgstr "Ошибки"

#: standalone/harddrake2:140
#, c-format
msgid "FPU"
msgstr "FPU"

#: standalone/harddrake2:147
#, c-format
msgid "Device"
msgstr "Устройство"

#: standalone/harddrake2:148
#, c-format
msgid "Partitions"
msgstr "Разделы"

#: standalone/harddrake2:153
#, c-format
msgid "Features"
msgstr "Возможности"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:176 standalone/logdrake:76
#: standalone/printerdrake:146 standalone/printerdrake:159
#: standalone/printerdrake:171
#, c-format
msgid "/_Options"
msgstr "/_Параметры"

#: standalone/harddrake2:177 standalone/harddrake2:203 standalone/logdrake:78
#: standalone/printerdrake:172 standalone/printerdrake:174
#: standalone/printerdrake:177 standalone/printerdrake:179
#, c-format
msgid "/_Help"
msgstr "/_Справка"

#: standalone/harddrake2:181
#, c-format
msgid "/Autodetect _printers"
msgstr "/Автоопределение _принтеров"

#: standalone/harddrake2:182
#, c-format
msgid "/Autodetect _modems"
msgstr "/Автоопределение _модемов"

#: standalone/harddrake2:183
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/Автоопределение приводов _jaz"

#: standalone/harddrake2:184
#, c-format
msgid "/Autodetect parallel _zip drives"
msgstr "/Автоопределение паралелльных приводов j_az"

#: standalone/harddrake2:191
#, c-format
msgid "/_Upload the hardware list"
msgstr "/_Выгрузить список оборудования"

#: standalone/harddrake2:192 standalone/printerdrake:152
#, c-format
msgid "/_Quit"
msgstr "/_Выход"

#: standalone/harddrake2:205
#, c-format
msgid "/_Fields description"
msgstr "/_Поля с описанием"

#: standalone/harddrake2:207
#, c-format
msgid "Harddrake help"
msgstr "Справка HardDrake"

#: standalone/harddrake2:216
#, c-format
msgid ""
"Once you've selected a device, you'll be able to see the device information "
"in fields displayed on the right frame (\"Information\")"
msgstr ""
"После того, как вы выбрали устройство, вы сможете увидеть информацию об "
"устройстве в полях, отображаемых в правом окне (\"Информация\")"

#: standalone/harddrake2:222 standalone/printerdrake:177
#, c-format
msgid "/_Report Bug"
msgstr "/_Отчет об ошибке"

#: standalone/harddrake2:224 standalone/printerdrake:179
#, c-format
msgid "/_About..."
msgstr "/_О программе..."

#: standalone/harddrake2:225
#, c-format
msgid "About Harddrake"
msgstr "О Harddrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:227
#, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"
msgstr ""
"Это HardDrake, утилита настройки оборудования %s .\n"
"<span foreground=\"royalblue3\">Версия:</span> %s\n"
"<span foreground=\"royalblue3\">Автор:</span> Thierry Vignaud &lt;"
"tvignaud@mandriva.com&gt;\n"
"\n"

#: standalone/harddrake2:243
#, c-format
msgid "Harddrake2"
msgstr "Harddrake2"

#: standalone/harddrake2:273
#, c-format
msgid "Detected hardware"
msgstr "Обнаруженное оборудование"

#: standalone/harddrake2:278
#, c-format
msgid "Configure module"
msgstr "Настроить модуль"

#: standalone/harddrake2:285
#, c-format
msgid "Run config tool"
msgstr "Запустить средство настройки"

#: standalone/harddrake2:309
#, c-format
msgid ""
"Click on a device in the left tree in order to display its information here."
msgstr ""
"Щелкните на устройство из дерева слева, чтобы увидеть здесь информацию о нем."

#: standalone/harddrake2:330 standalone/printerdrake:306
#: standalone/printerdrake:320
#, c-format
msgid "Unknown"
msgstr "Неизвестный"

#: standalone/harddrake2:350
#, c-format
msgid "Misc"
msgstr "Misc"

#: standalone/harddrake2:428
#, c-format
msgid "secondary"
msgstr "вторичный"

#: standalone/harddrake2:428
#, c-format
msgid "primary"
msgstr "первичный"

#: standalone/harddrake2:432
#, c-format
msgid "burner"
msgstr "записывающий"

#: standalone/harddrake2:432
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:512
#, c-format
msgid ""
"The following devices needs proprietary drivers or firmwares in order to "
"operate smoothly. The appropriate packages can be retrieved from the "
"Mandriva Club. Do you want to subscribe to the Mandriva Club?"
msgstr ""

#: standalone/harddrake2:595 standalone/harddrake2:598
#, c-format
msgid "Upload the hardware list"
msgstr "Выгрузить список оборудования"

#: standalone/harddrake2:600
#, c-format
msgid "Account:"
msgstr "Почтовый ящик:"

#: standalone/harddrake2:602
#, c-format
msgid "Hostname:"
msgstr "Имя узла:"

#: standalone/keyboarddrake:30
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "Пожалуйста, выберите раскладку своей клавиатуры."

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "Хотите, чтобы клавиша BackSpace в консоли возвращала Delete?"

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "LocaleDrake"

#: standalone/localedrake:44
#, c-format
msgid "You should install the following packages: %s"
msgstr "Вам необходимо установить следующие пакеты: %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: standalone/localedrake:47 standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: standalone/localedrake:55
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr ""
"Изменение выполнено, но чтобы оно вступило в силу, вы должны выйти из системы"

#: standalone/logdrake:49
#, c-format
msgid "Mandriva Linux Tools Logs"
msgstr "Журналы утилит Mandriva Linux"

#: standalone/logdrake:50
#, c-format
msgid "Logdrake"
msgstr "Logdrake"

#: standalone/logdrake:63
#, c-format
msgid "Show only for the selected day"
msgstr "Показывать только за выбранный день"

#: standalone/logdrake:70
#, c-format
msgid "/File/_New"
msgstr "/Файл/_Новый"

#: standalone/logdrake:70
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:71
#, c-format
msgid "/File/_Open"
msgstr "/Файл/_Открыть"

#: standalone/logdrake:71
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Save"
msgstr "/Файл/_Сохранить"

#: standalone/logdrake:72
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:73
#, c-format
msgid "/File/Save _As"
msgstr "/Файл/Сохранить _как"

#: standalone/logdrake:74
#, c-format
msgid "/File/-"
msgstr "/Файл/-"

#: standalone/logdrake:77
#, c-format
msgid "/Options/Test"
msgstr "/Параметры/Проверка"

#: standalone/logdrake:79
#, c-format
msgid "/Help/_About..."
msgstr "/Справка/_О программе..."

#: standalone/logdrake:108
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr "Аутентификация"

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr "Пользователь"

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr "Сообщения"

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr "Syslog"

#: standalone/logdrake:115
#, c-format
msgid "search"
msgstr "Поиск"

#: standalone/logdrake:127
#, c-format
msgid "A tool to monitor your logs"
msgstr "Утилита для мониторинга логов"

#: standalone/logdrake:128 standalone/net_applet:347 standalone/net_monitor:93
#, c-format
msgid "Settings"
msgstr "Настройки"

#: standalone/logdrake:133
#, c-format
msgid "Matching"
msgstr "Совпадает с"

#: standalone/logdrake:134
#, c-format
msgid "but not matching"
msgstr "но не совпадает с"

#: standalone/logdrake:138
#, c-format
msgid "Choose file"
msgstr "Выберите файл"

#: standalone/logdrake:150
#, c-format
msgid "Calendar"
msgstr "Календарь"

#: standalone/logdrake:160
#, c-format
msgid "Content of the file"
msgstr "Содержимое файла"

#: standalone/logdrake:164 standalone/logdrake:402
#, c-format
msgid "Mail alert"
msgstr "Почтовое уведомление"

#: standalone/logdrake:171
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr "Мастер предупреждений неожиданно упал:"

#: standalone/logdrake:224
#, c-format
msgid "please wait, parsing file: %s"
msgstr "Пожалуйста, подождите, разбирается файл: %s"

#: standalone/logdrake:379
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Сервер World Wide Web Apache"

#: standalone/logdrake:380
#, c-format
msgid "Domain Name Resolver"
msgstr "Распознаватель доменных имен"

#: standalone/logdrake:381
#, c-format
msgid "Ftp Server"
msgstr "Сервер Ftp"

#: standalone/logdrake:382
#, c-format
msgid "Postfix Mail Server"
msgstr "Почтовый сервер Postfix"

#: standalone/logdrake:383
#, c-format
msgid "Samba Server"
msgstr "Сервер Samba"

#: standalone/logdrake:385
#, c-format
msgid "Webmin Service"
msgstr "Служба Webmin"

#: standalone/logdrake:386
#, c-format
msgid "Xinetd Service"
msgstr "Служба Xinetd"

#: standalone/logdrake:397
#, c-format
msgid "Configure the mail alert system"
msgstr "Настроить систему почтовых уведомлений"

#: standalone/logdrake:398
#, c-format
msgid "Stop the mail alert system"
msgstr "Остановить систему почтовых уведомлений"

#: standalone/logdrake:405
#, c-format
msgid "Mail alert configuration"
msgstr "Настройка уведомления по почте"

#: standalone/logdrake:406
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"Добро пожаловать в утилиту настройки почты.\n"
"\n"
"Здесь вы сможете установить систему уведомления.\n"

#: standalone/logdrake:416
#, c-format
msgid "Services settings"
msgstr "Настройка служб"

#: standalone/logdrake:417
#, c-format
msgid ""
"You will receive an alert if one of the selected services is no longer "
"running"
msgstr ""
"Вы получите уведомление, если одна из выбранных служб больше не выполняется"

#: standalone/logdrake:424
#, c-format
msgid "Load setting"
msgstr "Настройка загрузки"

#: standalone/logdrake:425
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "Вы получите уведомление, если загрузка выше этого значения"

#: standalone/logdrake:426
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr "Загрузка"

#: standalone/logdrake:431
#, c-format
msgid "Alert configuration"
msgstr "Настройка уведомления"

#: standalone/logdrake:432
#, c-format
msgid "Please enter your email address below "
msgstr "Пожалуйста, введите ниже адрес своего email "

#: standalone/logdrake:433
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr "и введите имя (или IP) SMTP сервера, который желаете использовать"

#: standalone/logdrake:452
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr "Мастер успешно настроил почтовые уведомления."

#: standalone/logdrake:458
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr "Мастер успешно отключил почтовые уведомления."

#: standalone/logdrake:517
#, c-format
msgid "Save as.."
msgstr "Сохранить как..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "Выберите тип вашей мыши, пожалуйста."

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "Эмулировать третью кнопку?"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "Тест мыши"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "Пожалуйста, проверьте свою мышь:"

#: standalone/net_applet:47
#, c-format
msgid "Network is up on interface %s"
msgstr "Сеть поднята на интерфейсе %s"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:50
#, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "Сеть опущена на интерфейсе %s. Зайдите в \"Настроить сеть\""

#: standalone/net_applet:56 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Connect %s"
msgstr "Подключить %s"

#: standalone/net_applet:57 standalone/net_applet:76
#: standalone/net_monitor:468
#, c-format
msgid "Disconnect %s"
msgstr "Отключить %s"

#: standalone/net_applet:58
#, c-format
msgid "Monitor Network"
msgstr "Мониторинг сети"

#: standalone/net_applet:60
#, c-format
msgid "Manage wireless networks"
msgstr "Управление беспроводными сетями"

#: standalone/net_applet:61
#, c-format
msgid "Configure Network"
msgstr "Настроить сеть"

#: standalone/net_applet:63
#, c-format
msgid "Watched interface"
msgstr "Наблюдаемые интерфейсы"

#: standalone/net_applet:93
#, c-format
msgid "Profiles"
msgstr "Профили"

#: standalone/net_applet:102
#, c-format
msgid "Get Online Help"
msgstr "Получить помощь в Online"

#: standalone/net_applet:335
#, c-format
msgid "Interactive Firewall automatic mode"
msgstr "Автоматический режим интерактивного файеровола"

#: standalone/net_applet:340
#, c-format
msgid "Always launch on startup"
msgstr "Всегда запускать при старте"

#: standalone/net_applet:344
#, c-format
msgid "Wireless networks"
msgstr "Беспроводные сети"

#: standalone/net_applet:429
#, c-format
msgid "Interactive Firewall: intrusion detected"
msgstr "Интерактивный файервол: обнаружено вторжение"

#: standalone/net_applet:442
#, c-format
msgid "What do you want to do with this attacker?"
msgstr "Что вы хотите сделать с этим атакующим?"

#: standalone/net_applet:445
#, c-format
msgid "Attack details"
msgstr "Подробности атаки "

#: standalone/net_applet:449
#, c-format
msgid "Attack time: %s"
msgstr "Время атаки: %s"

#: standalone/net_applet:450
#, c-format
msgid "Network interface: %s"
msgstr "Сетевой интерфейс: %s"

#: standalone/net_applet:451
#, c-format
msgid "Attack type: %s"
msgstr "Тип атаки: %s"

#: standalone/net_applet:452
#, c-format
msgid "Protocol: %s"
msgstr "Протокол: %s"

#: standalone/net_applet:453
#, c-format
msgid "Attacker IP address: %s"
msgstr "IP-адрес атакующего: %s"

#: standalone/net_applet:454
#, c-format
msgid "Attacker hostname: %s"
msgstr "Имя хоста атакующего: %s"

#: standalone/net_applet:457
#, c-format
msgid "Service attacked: %s"
msgstr "Атакованная служба: %s"

#: standalone/net_applet:458
#, c-format
msgid "Port attacked: %s"
msgstr "Атакованный порт: %s"

#: standalone/net_applet:460
#, c-format
msgid "Type of ICMP attack: %s"
msgstr "Тип ICMP атаки: %s"

#: standalone/net_applet:465
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr "Всегда черный список (больше не спрашивать)"

#: standalone/net_monitor:57 standalone/net_monitor:62
#, c-format
msgid "Network Monitoring"
msgstr "Мониторинг сети"

#: standalone/net_monitor:98
#, c-format
msgid "Global statistics"
msgstr "Общая статистика"

#: standalone/net_monitor:101
#, c-format
msgid "Instantaneous"
msgstr "Мгновенный"

#: standalone/net_monitor:101
#, c-format
msgid "Average"
msgstr "Среднее"

#: standalone/net_monitor:102
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""
"Скорость\n"
"отправки:"

#: standalone/net_monitor:103
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""
"Скорость\n"
"получения:"

#: standalone/net_monitor:107
#, c-format
msgid ""
"Connection\n"
"time: "
msgstr ""
"Время\n"
"соединения: "

#: standalone/net_monitor:114
#, c-format
msgid "Use same scale for received and transmitted"
msgstr "Использовать одинаковую шкалу для принятых и отправленных"

#: standalone/net_monitor:133
#, c-format
msgid "Wait please, testing your connection..."
msgstr "Подождите, пожалуйста, тестируется ваше соединение..."

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Disconnecting from Internet "
msgstr "Отключаемся от Интернет "

#: standalone/net_monitor:182 standalone/net_monitor:195
#, c-format
msgid "Connecting to Internet "
msgstr "Подключение к Интернет "

#: standalone/net_monitor:226
#, c-format
msgid "Disconnection from Internet failed."
msgstr "Не удалось отключиться от Интернет."

#: standalone/net_monitor:227
#, c-format
msgid "Disconnection from Internet complete."
msgstr "Отключение от Интернет завершено."

#: standalone/net_monitor:229
#, c-format
msgid "Connection complete."
msgstr "Подключение выполнено."

#: standalone/net_monitor:230
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandriva Linux Control Center."
msgstr ""
"Подключение завершилось неудачей.\n"
"Проверьте свои настройки в Центре управления Mandriva Linux."

#: standalone/net_monitor:335
#, c-format
msgid "Color configuration"
msgstr "Настройка цвета"

#: standalone/net_monitor:383 standalone/net_monitor:403
#, c-format
msgid "sent: "
msgstr "отправлено: "

#: standalone/net_monitor:390 standalone/net_monitor:407
#, c-format
msgid "received: "
msgstr "получено: "

#: standalone/net_monitor:397
#, c-format
msgid "average"
msgstr "в среднем"

#: standalone/net_monitor:400
#, c-format
msgid "Local measure"
msgstr "Локальный показатель"

#: standalone/net_monitor:461
#, c-format
msgid ""
"Warning, another internet connection has been detected, maybe using your "
"network"
msgstr ""
"Предупреждение, было обнаружено другое подключение к Интернету, возможно "
"использующее вашу сеть"

#: standalone/net_monitor:472
#, c-format
msgid "No internet connection configured"
msgstr "Подключение к Интернету не настроено"

#: standalone/printerdrake:76
#, c-format
msgid "Reading data of installed printers..."
msgstr "Читаются данные установленных принтеров..."

#: standalone/printerdrake:128
#, c-format
msgid "%s Printer Management Tool"
msgstr "Утилита управления принтерами %s "

#: standalone/printerdrake:142 standalone/printerdrake:143
#: standalone/printerdrake:144 standalone/printerdrake:145
#: standalone/printerdrake:153 standalone/printerdrake:154
#: standalone/printerdrake:158
#, c-format
msgid "/_Actions"
msgstr "/_Действия"

#: standalone/printerdrake:142 standalone/printerdrake:154
#, c-format
msgid "/_Add Printer"
msgstr "/_Добавить принтер"

#: standalone/printerdrake:143
#, c-format
msgid "/Set as _Default"
msgstr "/Установить как _По умолчанию"

#: standalone/printerdrake:144
#, c-format
msgid "/_Edit"
msgstr "/_Редактировать"

#: standalone/printerdrake:145
#, c-format
msgid "/_Delete"
msgstr "/_Удалить"

#: standalone/printerdrake:146
#, c-format
msgid "/_Expert mode"
msgstr "/_Режим эксперта"

#: standalone/printerdrake:151
#, c-format
msgid "/_Refresh"
msgstr "/_Обновить"

#: standalone/printerdrake:158
#, c-format
msgid "/_Configure CUPS"
msgstr "/_Настройка CUPS"

#: standalone/printerdrake:171
#, c-format
msgid "/Configure _Auto Administration"
msgstr "/Настроить _автоматическое администрирование"

#: standalone/printerdrake:194
#, c-format
msgid "Search:"
msgstr "Поиск:"

#: standalone/printerdrake:197
#, c-format
msgid "Apply filter"
msgstr "Применить фильтр"

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Def."
msgstr "Def."

#: standalone/printerdrake:224 standalone/printerdrake:231
#, c-format
msgid "Printer Name"
msgstr "Имя принтера"

#: standalone/printerdrake:224
#, c-format
msgid "Connection Type"
msgstr "Тип соединения"

#: standalone/printerdrake:231
#, c-format
msgid "Server Name"
msgstr "Имя сервера"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:239
#, c-format
msgid "Add Printer"
msgstr "Добавить принтер"

#: standalone/printerdrake:239
#, c-format
msgid "Add a new printer to the system"
msgstr "Добавить в систему новый принтер"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:242
#, c-format
msgid "Set as default"
msgstr "Установить по умолчанию"

#: standalone/printerdrake:242
#, c-format
msgid "Set selected printer as the default printer"
msgstr "Сделать выбранный принтер используемым по умолчанию"

#: standalone/printerdrake:245
#, c-format
msgid "Edit selected printer"
msgstr "Редактировать выбранный принтер"

#: standalone/printerdrake:248
#, c-format
msgid "Delete selected printer"
msgstr "Удалить выбранный принтер"

#: standalone/printerdrake:251
#, c-format
msgid "Refresh the list"
msgstr "Обновить список"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS"
msgstr "Настройка CUPS"

#: standalone/printerdrake:254
#, c-format
msgid "Configure CUPS printing system"
msgstr "Настройка системы печати CUPS"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Enabled"
msgstr "Активирован"

#: standalone/printerdrake:310 standalone/printerdrake:324
#: standalone/printerdrake:348 standalone/printerdrake:360
#, c-format
msgid "Disabled"
msgstr "Отключен"

#: standalone/printerdrake:596
#, c-format
msgid "Authors: "
msgstr "Авторы:"

#. -PO: here %s is the version number
#: standalone/printerdrake:606
#, c-format
msgid "Printer Management %s"
msgstr "Управление принтерами %s"

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"Пакеты SANE должны быть установлены чтобы задействовать сканер.\n"
"\n"
"Вы желаете установить пакеты SANE?"

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr "Прекращение работы Scannerdrake."

#: standalone/scannerdrake:60
#, c-format
msgid ""
"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
"Не получается установить пакеты, необходимые для настройки сканера с помощью "
"Scannerdrake."

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "Scannerdrake сейчас не будет запущен."

#: standalone/scannerdrake:67 standalone/scannerdrake:491
#, c-format
msgid "Searching for configured scanners..."
msgstr "Поиск настроенных сканеров ..."

#: standalone/scannerdrake:71 standalone/scannerdrake:495
#, c-format
msgid "Searching for new scanners..."
msgstr "Поиск новых сканеров ..."

#: standalone/scannerdrake:79 standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr "Пересоздание списка настроенных сканеров ..."

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr "%s не поддерживается этой версией %s."

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "%s найден на %s, настроить его автоматически?"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "%s отсутствует в базе данных сканнеров, настроить его вручную?"

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "Выберите модель сканера"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "Обнаружена модель: %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "Порт: %s"

#: standalone/scannerdrake:138 standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr " (НЕПОДДЕРЖИВАМЫЙ)"

#: standalone/scannerdrake:144
#, c-format
msgid "The %s is not supported under Linux."
msgstr "%s не поддерживается под Linux."

#: standalone/scannerdrake:171 standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr "Не устанавливать firmware файл"

#: standalone/scannerdrake:175 standalone/scannerdrake:227
#, c-format
msgid ""
"It is possible that your %s needs its firmware to be uploaded everytime when "
"it is turned on."
msgstr ""
"Возможно, что вашему %s требуется загружать firmware при каждом включении."

#: standalone/scannerdrake:176 standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr "В таком случае вы можете задать автоматическое выполнение."

#: standalone/scannerdrake:177 standalone/scannerdrake:231
#, c-format
msgid ""
"To do so, you need to supply the firmware file for your scanner so that it "
"can be installed."
msgstr ""
"Чтобы так сделать, вам нужно предоставить firmware файл для вашего сканера, "
"чтобы его можно было установить."

#: standalone/scannerdrake:178 standalone/scannerdrake:232
#, c-format
msgid ""
"You find the file on the CD or floppy coming with the scanner, on the "
"manufacturer's home page, or on your Windows partition."
msgstr ""
"Ищите файл на CD или дискете, которые поставляются производителем вашего "
"сканера, на веб-странице производителя или на вашем разделе Windows."

#: standalone/scannerdrake:180 standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr "Установить firmware файл с"

#: standalone/scannerdrake:200
#, c-format
msgid "Select firmware file"
msgstr "Выберите firmware файл"

#: standalone/scannerdrake:203 standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr "firmware файл %s не существует или нечитаем!"

#: standalone/scannerdrake:226
#, c-format
msgid ""
"It is possible that your scanners need their firmware to be uploaded "
"everytime when they are turned on."
msgstr ""
"Возможно, что вашим сканерам требуется загружать firmware при каждом "
"включении."

#: standalone/scannerdrake:230
#, c-format
msgid ""
"To do so, you need to supply the firmware files for your scanners so that it "
"can be installed."
msgstr ""
"Чтобы так сделать, вам нужно предоставить firmware файл для вашего сканера, "
"чтобы его можно было установить."

#: standalone/scannerdrake:233
#, c-format
msgid ""
"If you have already installed your scanner's firmware you can update the "
"firmware here by supplying the new firmware file."
msgstr ""
"Если у вас уже установлено firmware сканера, вы можете его обновить, указав "
"новый файл firmware."

#: standalone/scannerdrake:235
#, c-format
msgid "Install firmware for the"
msgstr "Установить firmware для"

#: standalone/scannerdrake:258
#, c-format
msgid "Select firmware file for the %s"
msgstr "Выберите firmware файл для %s"

#: standalone/scannerdrake:276
#, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "Невозможно устанавить firmware файл для %s!"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr "Firmware файл вашего %s успешно установлен."

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr "%s не поддерживается"

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
"%s должен быть настроен при помощи printerdrake.\n"
"Вы можете запустить printerdrake из Центра управления %s в разделе "
"Оборудование."

#: standalone/scannerdrake:308 standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, c-format
msgid "Auto-detect available ports"
msgstr "Авто-определение доступных портов"

#: standalone/scannerdrake:310 standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr "Пожалуйста выберите устройство, к которому подключен ваш %s"

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(Замечание: параллельные порты автоматически не определяются)"

#: standalone/scannerdrake:313 standalone/scannerdrake:358
#, c-format
msgid "choose device"
msgstr "выберите устройство"

#: standalone/scannerdrake:347
#, c-format
msgid "Searching for scanners..."
msgstr "Поиск сканеров ..."

#: standalone/scannerdrake:383
#, c-format
msgid "Setting up kernel modules..."
msgstr "Настройка модулей ядра..."

#: standalone/scannerdrake:390 standalone/scannerdrake:397
#, c-format
msgid "Attention!"
msgstr "Внимание!"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/"
"sane.d/%s.conf. "
msgstr ""
"Ваш %s не получается настроить автоматически полностью.\n"
"\n"
"Требуется ручное вмешательство. Пожалуйста отредактируйте конфигурационный "
"файл /etc/sane.d/%s.conf. "

#: standalone/scannerdrake:392 standalone/scannerdrake:401
#, c-format
msgid ""
"More info in the driver's manual page. Run the command \"man sane-%s\" to "
"read it."
msgstr ""
"Подробности можно найти в справке драйвера. Запустите команду \"man sane-%s"
"\" чтобы прочесть."

#: standalone/scannerdrake:394 standalone/scannerdrake:403
#, c-format
msgid ""
"After that you may scan documents using \"XSane\" or \"Kooka\" from "
"Multimedia/Graphics in the applications menu."
msgstr ""
"После этого вы сможете сканировать документы с помощью \"XSane\" или \"Kooka"
"\" из меню приложений Мультимедиа/Графика."

#: standalone/scannerdrake:398
#, c-format
msgid ""
"Your %s has been configured, but it is possible that additional manual "
"adjustments are needed to get it to work. "
msgstr ""
"Ваш %s был настроен, однако возможно потребуется некоторая ручная настройка "
"чтобы заставить его работать. "

#: standalone/scannerdrake:399
#, c-format
msgid ""
"If it does not appear in the list of configured scanners in the main window "
"of Scannerdrake or if it does not work correctly, "
msgstr ""
"Если он не появляется в списке настроенных сканеров в главном окне "
"Scannerdrake или он некорректно работает, "

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr "отредактируйте конфигурационный файл /etc/sane.d/%s.conf. "

#: standalone/scannerdrake:406
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/"
"Graphics in the applications menu."
msgstr ""
"Ваш %s был настроен.\n"
"Теперь вы можете сканировать документы при помощи \"XSane\"или \"Kooka\" из "
"меню приложений Мультимедиа/Графика."

#: standalone/scannerdrake:431
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"Следующие сканеры\n"
"\n"
"%s\n"
"доступны в вашей системе.\n"

#: standalone/scannerdrake:432
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"Следующий сканер\n"
"\n"
"%s\n"
"доступен в вашей системе.\n"

#: standalone/scannerdrake:435 standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "Не найдены сканеры, доступные в вашей системе.\n"

#: standalone/scannerdrake:452
#, c-format
msgid "Search for new scanners"
msgstr "Поиск новых сканеров"

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr "Добавить сканер вручную"

#: standalone/scannerdrake:465
#, c-format
msgid "Install/Update firmware files"
msgstr "Установить/Обновить firmware файлы"

#: standalone/scannerdrake:471
#, c-format
msgid "Scanner sharing"
msgstr "Общий доступ к сканеру"

#: standalone/scannerdrake:530 standalone/scannerdrake:695
#, c-format
msgid "All remote machines"
msgstr "Все удаленные машины"

#: standalone/scannerdrake:542 standalone/scannerdrake:845
#, c-format
msgid "This machine"
msgstr "Эта машина"

#: standalone/scannerdrake:582
#, c-format
msgid ""
"Here you can choose whether the scanners connected to this machine should be "
"accessible by remote machines and by which remote machines."
msgstr ""
"Здесь вы можете выбрать какие сканеры, подсоединенные к данной машине должны "
"быть доступны для удаленных машин и для каких именно удаленных машин."

#: standalone/scannerdrake:583
#, c-format
msgid ""
"You can also decide here whether scanners on remote machines should be made "
"available on this machine."
msgstr ""
"Вы также можете решить здесь какие сканеры на удаленных машинах должны быть "
"доступны на этой машине"

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "Сканеры этой машины доступны для других компьютеров"

#: standalone/scannerdrake:588
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "Общий доступ к сканеру для хостов:"

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr "Использовать сканеры на удаленных компьютерах"

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr "Использовать сканеры хостов: "

#: standalone/scannerdrake:632 standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, c-format
msgid "Sharing of local scanners"
msgstr "Общий доступ к локальным сканерам"

#: standalone/scannerdrake:633
#, c-format
msgid ""
"These are the machines on which the locally connected scanner(s) should be "
"available:"
msgstr ""
"Есть такие машины, на которых должны быть доступны локально подключенные "
"сканеры:"

#: standalone/scannerdrake:644 standalone/scannerdrake:794
#, c-format
msgid "Add host"
msgstr "Добавить хост"

#: standalone/scannerdrake:650 standalone/scannerdrake:800
#, c-format
msgid "Edit selected host"
msgstr "Редактировать выбранный хост"

#: standalone/scannerdrake:659 standalone/scannerdrake:809
#, c-format
msgid "Remove selected host"
msgstr "Удалить выбранный хост"

#: standalone/scannerdrake:683 standalone/scannerdrake:691
#: standalone/scannerdrake:696 standalone/scannerdrake:742
#: standalone/scannerdrake:833 standalone/scannerdrake:841
#: standalone/scannerdrake:846 standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr "Имя/IP адрес хоста:"

#: standalone/scannerdrake:705 standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr "Выберите хост, на котором должны быть доступны локальные сканеры"

#: standalone/scannerdrake:716 standalone/scannerdrake:866
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "Вы должны ввести имя хоста или IP адрес.\n"

#: standalone/scannerdrake:727 standalone/scannerdrake:877
#, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "Этот хост уже есть в списке, его нельзя добавить снова.\n"

#: standalone/scannerdrake:782
#, c-format
msgid "Usage of remote scanners"
msgstr "Использование удаленных сканеров"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr "Машины на которых должны использоваться сканеры:"

#: standalone/scannerdrake:940
#, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr ""
"saned нужно установить чтобы разрешить совместное использование сканера"
"(ов).\n"
"\n"
"Желаете установить пакет saned?"

#: standalone/scannerdrake:944 standalone/scannerdrake:948
#, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "Ваш сканер не будет доступен для сети."

#: standalone/service_harddrake:105
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "Были удалены некоторые устройства из оборудования класса \"%s\":\n"

#: standalone/service_harddrake:106
#, c-format
msgid "- %s was removed\n"
msgstr "- %s был удален\n"

#: standalone/service_harddrake:109
#, c-format
msgid "Some devices were added: %s\n"
msgstr "Были добавлены некоторые устройства: %s\n"

#: standalone/service_harddrake:110
#, c-format
msgid "- %s was added\n"
msgstr "- %s был добавлен\n"

#: standalone/service_harddrake:208
#, c-format
msgid "Hardware probing in progress"
msgstr "Выполняется определение оборудования"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr "Изменения оборудования в классе  \"%s\" (%s секунд на ответ)"

#: standalone/service_harddrake_confirm:8
#, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "Хотите запустить соответствующие утилиты настройки?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "Выбор языка"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "Лицензия"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "Настройка мыши"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "Определение жесткого диска"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "Выбор класса установки"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "Выбор клавиатуры"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "Разметка диска"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "Форматирование разделов"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "Выбор пакетов"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "Установка системы"

#: steps.pm:25
#, c-format
msgid "Administrator password"
msgstr "Пароль администратора"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "Пользователи"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "Настройка сети"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "Установка загрузчика"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "Настройка Х"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "Настройка служб"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "Установка обновлений"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "Завершение установки"

#: ugtk2.pm:899
#, c-format
msgid "Is this correct?"
msgstr "Все правильно?"

#: ugtk2.pm:959
#, c-format
msgid "No file chosen"
msgstr "Файлы не выбраны"

#: ugtk2.pm:961
#, c-format
msgid "You have chosen a file, not a directory"
msgstr "Вы указали файл, а не каталог"

#: ugtk2.pm:963
#, c-format
msgid "You have chosen a directory, not a file"
msgstr "Вы указали каталог, а не файл"

#: ugtk2.pm:965
#, c-format
msgid "No such directory"
msgstr "Нет такого каталога"

#: ugtk2.pm:965
#, c-format
msgid "No such file"
msgstr "Нет такого файла"

#: ugtk2.pm:1046
#, c-format
msgid "Expand Tree"
msgstr "Развернуть дерево"

#: ugtk2.pm:1047
#, c-format
msgid "Collapse Tree"
msgstr "Свернуть дерево"

#: ugtk2.pm:1048
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "Переключение между простым и сортированным по группам списками"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s не установлен\n"
"Нажмите \"Далее\" чтобы установить или \"Отмена\" чтобы выйти"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "Установка завершилась неудачей"

#~ msgid "Unknown Model"
#~ msgstr "Неизвестная модель"

#~ msgid ""
#~ "Either with the newer HPLIP which allows printer maintenance through the "
#~ "easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on "
#~ "newer PhotoSmart models "
#~ msgstr ""
#~ "Либо с новейшим HPLIP, который позволяет обслуживание принтеров с помощью "
#~ "простого в использовании графического приложения \"Toolbox\" и весьма "
#~ "удобного на новых моделях PhotoSmart "

#~ msgid ""
#~ "or with the older HPOJ which allows only scanner and memory card access, "
#~ "but could help you in case of failure of HPLIP. "
#~ msgstr ""
#~ "либо с более старым HPOJ, который разрешает только сканирование и доступ "
#~ "к карте памяти, но может быть полезен если HPLIP не работает."

#~ msgid "HPOJ"
#~ msgstr "HPOJ"

#~ msgid ""
#~ "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
#~ "LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, "
#~ "Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
#~ msgstr ""
#~ "Является ли ваш принтер многофункциональным устройством от HP или Sony "
#~ "(OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 со сканером, "
#~ "DeskJet 450, Sony IJP-V100), HP PhotoSmart или HP LaserJet 2200?"

#~ msgid "Installing mtools packages..."
#~ msgstr "Устанавливаются пакеты mtools"

#~ msgid "Photo memory card access on the %s will not be possible."
#~ msgstr "Доступ к фотокарте памяти на %s будет закрыт."

#~ msgid "Scanning on your HP multi-function device"
#~ msgstr "Сканируется ваше многофункциональное устройство HP"

#~ msgid "Photo memory card access on your HP multi-function device"
#~ msgstr "Доступ к фотокарте памяти вашего многофункционального устройства HP"

#~ msgid "Printing/Scanning/Photo Cards on \"%s\""
#~ msgstr "Печать/Сканирование/Фотокарты на \"%s\""

#~ msgid "Printing/Scanning on \"%s\""
#~ msgstr "Печать/Сканирование на \"%s\""

#~ msgid "Printing/Photo Card Access on \"%s\""
#~ msgstr "Печать/Доступ к фотокартам на  \"%s\""

#~ msgid ""
#~ "Your multi-function device was configured automatically to be able to "
#~ "scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to "
#~ "specify the scanner when you have more than one) from the command line or "
#~ "with the graphical interfaces \"xscanimage\" or \"xsane\". If you are "
#~ "using the GIMP, you can also scan by choosing the appropriate point in "
#~ "the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command "
#~ "line to get more information.\n"
#~ "\n"
#~ "You do not need to run \"scannerdrake\" for setting up scanning on this "
#~ "device, you only need to use \"scannerdrake\" if you want to share the "
#~ "scanner on the network."
#~ msgstr ""