2000-06-16 Pixel * modules.pm (write_conf): rename conf.modules to modules.conf if needed. Outputs to modules.conf * detect_devices.pm (cdroms): fix using scd0 for ide-burners when already a scsi cdrom drive 2000-06-13 Pablo Saratxaga * pkgs.pm: added 'acon' requirement for all right-to-left languages 2000-06-07 François Pons * diskdrake.pm: added SunOS partition as blue for diskdrake. * install_steps_interactive.pm: make sure of no division by zero may happen. * install_steps_newt.pm: added WARNING for fdisk on sparc*. * modules.pm: make sure of loading sd_mod module after any scsi module. * sbus_probing/main.pm: insmod openprom before trying sbus probing. * pkgs.pm: corrected by use of parabolic solution for size approximation. * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe. 2000-06-05 Pablo Saratxaga * install_steps.pm,lang.pm: added load_console_font, to load the proper console fonts (text mode install is not very useful otherwise) 2000-06-03 Pixel * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs 2000-06-01 Pablo Saratxaga * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font; it fits better with the other fonts. Added a 'README' file with some comments and the required copyright notice 2000-05-29 François Pons * Xconfigurator.pm: added support for SBUS card autodetection. * commands.pm: added lssbus to list SBUS devices detected. * detect_devices.pm: removed alpha restriction on USB. * install_steps_interactive.pm: added SBUS support. * c/sbus.c: initial revision, core SBUS support (inspired from kudzu). * c/stuff.xs.pm: added wrapper for sbus.c interface. * sbus_probing/main.pm: initial revision (inspired from kudzu). 2000-05-27 Adam Lebsack * share/list.ppc: various PPC modifications, for HFS * partition_table_mac.pm: bug fixes * partition_table.pm: various HFS fixes, isHiddenMacPart() * diskdrake.pm: added HFS to top buttons when run on PPC * keyboard.pm: fixed name of mac-fr2-ext keymap * install_steps_gtk.pm: added Xpmac server support for PPC. * install_steps_interactive.pm: disallow hardware configuration on PPC for now. All drivers should be in the kernel. setup_this_kind(). * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match our partition table read. Added PPC grep condition for PPC in get_visible_fstab. * fs.pm: fix argument for HFS formatting. * Makefile: special installation of PPC files. 2000-05-25 Chmouel Boudjnah * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on alpha|sparc. 2000-05-25 François Pons * silo.pm: added configure_entry to try creating an initrd for an image entry in bootloader. fixed wrong usage of run_programm::rooted with 2>. * commands.pm: fixed insmod command to take modules64.cz* on sparc* * install2.pm: removed create boot disk and create auto install disk on sparc*. force writing of /etc/conf.modules for step setupBootloader. * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*. * install_steps_interactive.pm: added missing $prefix for glob_. call configure_entry in setupSILO. fixed cancel or None entry on setupBootloader. * modules.pm: updated alias for sparc*. * any.pm: fixed proprable wrong test for setupBootloader in beginner at the very beginning. * printer.pm: fixed typo. * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and resolution for these server too. 2000-05-24 François Pons * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*. * partition_table_sun.pm: fixed a bug when reading partition table with unused partition in the middle of the table. 2000-05-23 François Pons * common.pm: update arch to take into account sparc and sparc64. added better_arch and compat_arch function. * silo.pm: fixed adding new kernel automatically. * install2.pm: removed create boot disk stuff for sparc*. * install_steps.pm: added initrd generation for alpha. added ldconfig at end of installation. removed /usr/bin/dumpkeys existence test on sparc*, should be added in the future. * install_steps_interactive.pm: removed supermount for sparc*. * install_steps_gtk.pm: added /dev/kbd device creation and permedia2 support for sparc*. removed screen limit of 1024x768. * detect_devices.pm: fixed problem on machine with really no IDE interface. * modules.pm: added support for 32 and 64 bit architectures on sparc*. * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate partition. * pkgs.pm: added support for multi-arch rpm file (need for sparc*), fixed correctSize and invCorrectSize to take back a linear approximation above 9Gb approximatively. removed ftp rewind as broken currently. * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed globing (removed) against existing '*'. * partition_table.pm: removed support for non SUN partition table, as it may freeze the kernel or may be blanked? * Xconfigurator.pm: take Sun24 server by default on sparc*, add support for permedia2 card (3DLabs server). * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*. * Makefile: added support for modules and modules64 for sparc*. * c/stuff.xs.pm: added kernel_arch function for getting the current true architecture provided by the kernel (uname -m). 2000-05-09 Pixel * install_any.pm (kdeicons_postinstall): the URL link to doc must be $lang/index.html, not only $lang. * standalone/mousedrake: add handling of XF86Config-4 * any.pm (setupBootloader): fix bug (was adding 2 glob_'s) 2000-05-08 Pixel * install2.pm (main): move the touch of some files here to please linuxconf * install2.pm (miscellaneous): s/KBD/KEYBOARD/ * lilo.pm (install_grub): don't keep symlinks for reiserfs * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs) * install_any.pm (getHds): default mount point for windobe in lowercased for StartOffice(!) 2000-05-08 Pablo Saratxaga * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards * keyboard.pm: Added new Lithuanian keyboard and changed the string for brazilian ABNT-2 to state more clearly its ABNT nature (it is not a standard PC keyboard; it uses some different keycodes) 2000-05-07 Pixel * install_steps.pm (choosePackages): return availableCorrected instead of available * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's) * modules.pm (text2driver): same as text2lang below * keyboard.pm (text2keyboard): same as text2lang below * lang.pm (text2lang): replace the while (... each) by a foreach (keys) (because each is dangerous if loop is exited) * install_steps_interactive.pm (selectKeyboard): better handling of multiple langs question. * ftp.pm (new): Timeout set to 60 (seconds), was default (120) * install_steps_interactive.pm (setup_thiskind): remove ide-* from modules displayed as loaded. 2000-05-06 Pixel * fsedit.pm (check_mntpoint): verify that standard mntpoints (/ /usr) are not on not trueFS * any.pm (setupBootloader): add $prefix for the 2 glob_'s 2000-05-07 Pablo Saratxaga * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua 2000-05-06 Pablo Saratxaga * printerdrake.pm: fixed English error 2000-05-05 Pixel * Xconfigurator.pm (monitorConfiguration): remove the special case for fbdev. * install_steps_interactive.pm (setup_thiskind): replace return by next in case load_module fails. * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4 * pkgs.pm (correctSize): updated for 7.1 * install_any.pm (getAvailableSpace): move the removing of $minAvailableSize here. 2000-05-04 Pixel * install2.pm (configurePrinter): give clicked to printerConfig * interactive.pm (ask_from_entries_ref): set default val if not_edit * interactive_newt.pm (ask_from_entries_refW): remove setting of default val. Now done in interactive::ask_from_entries_ref * interactive_gtk.pm (ask_from_entries_refW): handle empty value * modules.pm (read_already_loaded): ensure that already loaded modules are put in %loaded. * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel) * lilo.pm (install_lilo): truncate label's to 15 chars * install_any.pm (generate_ks_cfg): fix missing space * install_any.pm (generate_ks_cfg): fix bug for nfs comand * install2.pm: get rid of autoformat * install_steps.pm (choosePartitionsToFormat): get rid of autoformat 2000-05-03 Pixel * any.pm (setupBootloader): replace ask_many_from_list by ask_from_list for bootloader choice * services.pm (drakxservices): stop immediately service if removed * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd * install_steps.pm (afterInstallPackages): touch some files to please linuxconf 2000-05-03 François Pons * install_steps.pm: updated min size, fixed kppprc generation. * install_any.pm: make sure postinstall-rpm is here before erasing (avoid error on reboot only). 2000-05-02 Pixel * raid.pm (format_part): don't call raid::make if part is already formatted (as raidstop fails) * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any more * install_steps_interactive.pm (setup_thiskind): make insmod'ing fail a simple warning. * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB * share/MonitorsDB: take new one from RedHat * standalone/drakboot: added kfloppy * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly not to have it) 2000-05-01 Pixel * install_steps_interactive.pm (setRootPassword): remove NIS_server, use NIS instead * install_any.pm (setAuthentication): remove NIS_server, use NIS instead * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist 2000-04-28 Pixel * install_steps.pm (afterInstallPackages): fix yet another bug for ttf from windobe handling * install_steps_interactive.pm (selectInstallClass): hide beginner mode in corporate. Display special help. 2000-04-29 Pablo Saratxaga * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales text to be properly aligned (reported by Craig Chang ) * common.pm: now that po handling is correct, I changed the order of reading variables so that it follows the standards ($LANGUAGE first) * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251 2000-04-28 François Pons * install_steps*.pm: added support for selection of package during upgrade the same way it is done for installation. added check of minimal size, abort else (at least let the user know about :-) fixed crypto if no network interface available. * install2.pm: fixed problem during upgrade that lost network configuration. 2000-04-28 Pixel * modules.pm (load_raw): don't call commands::insmod, do it in place. Merge with load_multi * install_steps.pm (afterInstallPackages): fix windobe ttfonts symlinking * Xconfigurator.pm (cardConfiguration): load module agpgart for i810 * install_any.pm (getHds): changed the mount point setting for windows partitions as device_windobe is not unique 2000-04-27 Pixel * install_steps_gtk.pm (create_steps_window): changed to adapt to new hidden format * install2.pm (@installSteps): changed the way hidden is handled. Now it is a true perl expression (great power now) * install_steps_gtk.pm (selectInstallClass1): update steps window before asking normal/devel/server. Nicer! * install_steps_interactive.pm (configureNetwork): when "Cancel" pressed at network interface configuration do not skip all configuration. 2000-04-26 François Pons * install_steps.pm (pppConfig): modified a lot, removed template file for ifcfg and chat file. 2000-04-26 Pixel * install_steps_gtk.pm (choosePackagesTree): use a fix width for the tree column (so that the checkbox are always visible without scrolling) * standalone/drakboot: drakfloppy and gfloppy are X only, no need to propose them in console * install_any.pm (relGetFile): added auto_inst to files to get from Mandrake/base * install2.pm (main): changed auto_inst behaviour * standalone/adduserdrake: fix a bug (s/$o/$in/g) * interactive_newt.pm (ask_from_entries_refW): now handling complete/changed/focus_out callbacks (at least more than before) * Newt/Newt.xs: added rough callback handling 2000-04-25 François Pons * printerdrake.pm: added support for PPA more easily, allow printers entry using ppa driver event if pnm2ppa not installed, install it if neccessary after. * network.pm, install_steps.pm, install_steps_interactive.pm: added support for stoping a network interface, usefull for ppp0 to avoid using it too long. * install_steps.pm: fixed missing local on pap_secrets file. 2000-04-25 Pixel * lilo.pm (install): moved the generation of the keytable here. It is used by both lilo & grub (lilo is not always installed as was assumed) * common.pm (formatAlaTeX): remove bounding spaces * pkgs.pm (setSelectedFromCompssList): remove the hack for min mark 25 in beginner * install_steps_interactive.pm (choosePackages): set $min_mark to 25 in beginner 2000-04-24 Pixel * install_steps_interactive.pm (setupXfree): add a yesorno question for choosing between XF4 and XF3 in expert * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window * install_any.pm (update_userkderc): make sure uid and gid are kept * diskdrake.pm (Create): add Extended_0x85 as a choice for expert * partition_table.pm (add_extended): handle a 3rd arg, $extended_type to tell which kind of extended partition is wanted * partition_table.pm (adjust_main_extended): in non-expert, automatically set extended to linux-extended if there's only linux-type partitions. 2000-04-22 Pablo Saratxaga * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit and not for byte. RAM is expressed in megabytes -> MB 2000-04-19 François Pons * install_steps_interactive.pm: fixed crazy mutli CD manipulation. * printer.pm: fixed wrong prototype of print_pages. * install2.pm: set version to 7.1 for crypto stuff. * crypto.pm: commented ackbar crypto site. 2000-04-17 Pixel * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by linuxconf) 2000-04-14 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): don't ask about checking bad blocks for reiserfs, cuz not handled * fs.pm (mount): reiserfs handling * fs.pm (format_reiserfs): added * fs.pm (write_fstab): add option "notail" for reiserfs if the partition holds the kernel (/boot or /) * partition_table.pm (isTrueFS): added, replaces most occurences of isExt2 2000-04-12 François Pons * install2.pm: force installation step if package have been selected on step choose packages. * install_any.pm: protected against die in perl (setstep or theme_changed). 2000-04-11 François Pons * resize_fat: added some limits verification. * interactive_gtk.pm: corrected swap of arg with help adding. 2000-04-10 François Pons * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list, which is used by printerdrake only. drops key bindings. 2000-04-07 François Pons * tools/serial_probe: obsoleting pnp_serial which is now replaced by this one, taken from kudzu, really faster and probe all serial devices at one time. modified to probe correctly modem :-) * mouse.pm: updated to use serial_probe interface of detect_devices.pm. * detect_devices.pm: modified to use serial_probe, cache probed devices to avoid reprobing. 2000-04-06 François Pons * install_steps_interactive.pm, install_steps.pm: added support for peerdns options of ppp, so removed dns address unless expert. 2000-04-05 François Pons * crypto.pm, install_steps_interactive.pm, install2.pm, install_steps.pm: added crypto stuff to support hdlist-crypto.cz2 and depslist-crypto. dependancies are not supported but with a simpler format of depslist file where closure are not done and only package name are used for dependancies. * pkgs.pm: added better support for multi CD manipulation, including selection and refus. 2000-04-04 François Pons * pkgs.pm: modified selection packages from compssList by incremental selection, much more quickly. added selected medium for selecting a package. * install_any.pm: refused media hash transfered to selected value of media table. @needToCopy list should only have package of default medium. 2000-04-03 Pixel * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha 2000-03-31 François Pons * install_steps_gtk.pm: made changeMedium sub modification permanent. * pkgs.pm: modified upgrade to avoid use of header. 2000-03-31 Pablo Saratxaga * keyboard.pm: some more choices for PPC keyboards 2000-03-30 François Pons * install2pm: added eval around loading af_packet and postinstall copy of RPMS. * devices.pm: added /dev/kdb for SPARC. * install_any.pm: modified multi CD management, postinstall copy of RPMS. * install_steps_gtk.pm: added support for Xsun server for SPARC. * install_steps_interactive.pm: added multi CD dialog box for selecting CD available. Serialized ethernet configuration and ppp configuration. * pkgs.pm: added check for infinite recursion for bad depslist. * printer.pm: better test for reparse of printerdb. * Xconfigurator.pm: added support for Xsun server for SPARC. 2000-03-30 Pixel * install_steps_gtk.pm (choosePackagesTree): enhance tree selection 2000-03-29 Pixel * interactive_gtk.pm (wait_messageW): add some padding (nicer) * install_steps_interactive.pm (generateAutoInstFloppy): created, creates a floppy for auto installs. * install_any.pm (generate_ks_cfg): created, generates stage1 ks.cfg file * share/po/DrakX.pot: added special comment for grub entry 2000-03-28 Pixel * install_steps_interactive.pm (selectKeyboard): sort langs for many-lang install * mouse.pm (write): add WHEEL telling if a wheel mouse is there 2000-03-28 Pablo Saratxaga * keyboard.pm: added entries for all three Armenian keyboards 2000-03-26 Pixel * install_any.pm (install_urpmi): full support for multi-hdlist's * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of $prefix/var/lib/urpmi * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a fake name. Access via /tmp/$hdlist is given for non-fake name * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/) 2000-03-25 Pixel * lilo.pm: updated to the new format of entries. It was an hash. Now the key is field kernel_or_dev, and entries is an array. (get): added, it returns the entry using a kernel (needed because entries is no more a hash) * install_steps_interactive.pm (setupLILO): adapted to the new format * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling * fsedit.pm (suggest_part): if suggested part contains a field "hd", ensure the partition is created on this hard drive * install2.pm (main): before leaving installation, remove /var/lib/urpmi if urpmi not installed * diskdrake.pm (Resize): ext2resize to size $part->{size} instead of $size 2000-03-24 Pixel * detect_devices.pm (hasHPT): added. Now nice handling of hpt366 (ultra66) without rebooting and making special floppy :) * lilo.pm (install_grub): much better grub configuration (better than lilo's :pp) * install_steps.pm (setupBootloaderBefore): remove entry floppy for security > 3 2000-03-23 Pixel * install_steps_gtk.pm (selectMouse): added, takes care of telling the X server if the user changed the mouse type. Only done if a serial mouse is chosen. * install_steps_newt.pm (doPartitionDisks): add a call to * mouse.pm (write): added "device=" in etc/sysconfig/mouse for devfs (it looses the symlink /dev/mouse) 2000-03-22 Pixel * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry 2000-03-20 François Pons * detect_devices.pm, fs.pm, install_any.pm: added supports for LS-120 floppy drive and icons on desktop of KDE (untested). * printer.pm, printerdrake.pm: added supports for PPA interface in new rhs-printfilters, always enable "Print text as postscript" option for such printers. 2000-03-20 Pablo Saratxaga * keyboard.pm: changed XKB name for Swedish keyboard changed XKB names for Russian and German keyboards added a choice for "Croatian" keyboard * share/compss{,List}: added various new locales-*, ispell-* and netscape-* files. changed ppa to pnm2ppa. 2000-03-17 François Pons * install_steps.pm: added setup for all configured queue. * install_steps_interactive.pm: modified for retrieving packages or current configuration. * printer.pm: correction, tested retrieve of printer configuration without printtool comments in printcap file: added update of entry according to gsdriver used (untested again). * printerdrake.pm: better handling of cancel, manage of multiple queue definition together (as lp|My printer). 2000-03-16 François Pons * install_steps_interactive.pm: moved in printerdrake.pm the test of printer usage. * printerdrake.pm: heavy modification to handle multiple queue, corrected some bugs too, added much more features as printtool. * printer.pm: added more features for filter, allow printer to be retrieved without help of printtool id in printcap file (untested). 2000-03-14 Pixel * diskdrake.pm (Loopback): handling of the file loopback: test existence of the file and take its size. 2000-03-14 François Pons * install_any.pm: corrected for duplicate file on other CD. 2000-03-13 Pixel * detect_devices.pm (floppies): don't return hash but the device name 2000-03-13 François Pons * pkgs.pm, install_any.pm: small correction for multiple media installation. * tools/syncrpms: added for handling synchronisation of multiple source rpm directories (and multiple target), include cleaning. * tools/closurepkgs: tools to get rpm that may be installed by DrakX after normal packages installation (printer, network, X11...), may be used to duplicate on other CD some important stuff of the first one. 2000-03-12 Pixel * install_steps_interactive.pm (choosePackages): compute the max_size very simply (sum of all package sizes), otherwise too costly * pkgs.pm (install): call cleanHeaders at the end * pkgs.pm (cleanHeaders): created * install2.pm (miscellaneous): /etc/msec/init.sh is now /usr/sbin/msec (yoann thanks for not telling :pp) * pkgs.pm (install): remove the $prefix of mountpoints for not enough room to install error message 2000-03-11 Pixel * my_gtk.pm (_create_window): add callback on focus to ensure_focus. The result is no more 3 focus states with 2 buttons. * interactive_gtk.pm (ask_from_treelistW): better keyboard handling * raid.pm (make): check the result of mkraid. Suggest raidtools are missing in standalone diskdrake * devices.pm (set_loop): created, searches for an available loopback and sets the file to it * lilo.pm (dev2grub): fixed a missing slash * interactive_gtk.pm (wait_message_nextW): do not update if same message, otherwise silly gtk won't do anything and we'll wait forever :( 2000-03-10 François Pons * *.pm: heavy modification to take into account multiple media installation. 2000-03-10 Pixel * install2.pm (@install_classes): cleanup, no more i18n (is now in install_steps_interactive), remove old entries 2000-03-09 Pixel * modules.pm (write_conf): don't add alias block-major-11 in every case * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss) * fs.pm (format_*): move the @options before the device * loopback.pm: created, added a lot of stuff for loopback in diskdrake.pm, fs.pm... 2000-03-08 Pixel * partition_table.pm: %type2fs replaced ox402 by 0x402 * detect_devices.pm (cdroms): fix "scd" (should be "scd0") * install_any.pm (install_urpmi): update for new hdlist.cz2 2000-03-07 Pixel * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/ * install_steps_interactive.pm (addUser): force add a normal user for security 4 2000-03-05 Pixel * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row (tis the Gtk-Perl 0.7002 was of doing) 2000-03-04 Pixel * modules.pm (write_conf): add ide-floppy to the modprobes of post-install supermount 2000-03-03 Pixel * commands.pm (ps): add RSS to ps command 2000-03-02 Adam Lebsack * mouse.pm: added mac mouse detection to mouse::detect. * detect_devices.pm: added a routine to probe /dev/usbmouse on macs. 2000-03-01 François Pons * *.pm: heavy modification to take into account smaller transaction during installation. still a lot of test to perform, no provides updated currently and building of hdlist.cz2 and depslist.ordered need old files... nothing done for hdlist.gz during post installation, but hdlist.cz2 is already copied in /var/lib/urpmi [and is used during installation of packages as extract_archive need a true file]. 2000-03-01 Pixel * lilo.pm (install_grub): creation * network.pm (write_interface_conf): ONBOOT = !pcmcia * install_steps_gtk.pm (new): more intelligent SIGCHLD handler 2000-02-29 Pixel * modules.pm: moved common network stuff from "net" to "network" (modules like nfs lockd...) * fs.pm (write_fstab): moved the sort to the right place * services.pm (drakxservices): chkconfig --list is i18n'ed :( set LANGUAGE=C before * partition_table_raw.pm (get_geometry): geom{cylinders} must not be a decimal value :) * install_steps_gtk.pm (create_logo_window): set_name logo for logo window * share/install.rc: force disabling of background image theme * install_steps_gtk.pm (enteringStep): add step information for console 1 * any.pm (addKdmIcon): new function * install_steps.pm (addUser): handle field icon * install_steps_interactive.pm (addUser): add choice of kdm icon * standalone/adduserdrake: add choice of kdm icon * diskdrake.pm (ask_all_data...): change for easier i18n * install_steps.pm (miscellaneous): add CLEAN_TMP handling (need cleaning?) * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP option in expert * install2.pm (miscellaneous): add CLEAN_TMP option for /etc/sysconfig/system * install_steps_interactive.pm (miscellaneous): forbidden useSupermount if high security. * mouse.pm (detect): fix bug (ttyS instead of ttyS0) 2000-02-28 Pixel * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for svga and accel. SVGA also wants 16 bpp. added ugly modeline for 800x600. * partition_table_raw.pm (get_geometry): when the HDIO_GET_IDENTITY fails, defaults to what GETGEO gave * install2.pm (main): use modules::load_multi to increase boot start time * modules.pm (load_multi): added this function for loading many modules at once. * install_steps_gtk.pm (new): increase time before timeout * detect_devices.pm (cdroms): change the device associated with ide-burners (hdX -> scdX). Problem is how to know the X in scdX :( * modules.pm (write_conf): sort scsi_hostadapter's 2000-02-27 Pixel * install2.pm (main): load ide-probe and the like in 'prereq' type so no aliases are added to conf.modules 2000-02-25 Pixel * devices.pm (make): small code cleanup * partition_table_raw.pm (adjustEnd): more explicit error message * fsedit.pm (allocatePartitions): fix a bug (size was getting too big after each allocation) making adjustEnd cry 2000-02-24 Pixel * interactive_gtk.pm (new): added the "new" method to initialize windowheight for isStandalone * install_steps_gtk.pm (new): returns undef in case no X server works * install2.pm (main): moved the ejectCdrom from install_steps::END to here * install2.pm (main): fix the $SIG{SEGV} handler * install2.pm (main): added a "try again" in text install if the "new" fails * install_steps_interactive.pm (createBootdisk): fix an error for non fdX choice of floppy drive * install_steps_interactive.pm (setup_thiskind): remove the "defined @l" 2000-02-23 Pixel * install2.pm (%suggestedPartitions): remove any /boot entries * install2.pm (selectInstallClass): removed the special code to /boot entries from suggestedPartitions for on non-intel (and it was buggy :) * fsedit.pm (@suggestions): remove the /boot entry * fsedit.pm (check_mntpoint): remove the 1024 cylinder check * fsedit.pm (suggest_part): remove the 1024 cylinder special case * install_steps_interactive.pm (setupLILO): replace linear option by lba32 * lilo.pm (suggest): add lba32 by default * install_steps_interactive.pm (load_thiskind): moved the HPT stuff to install_any::ultra66 and call it. Add sound card configuration (3 lines :) * my_gtk.pm and interactive_gtk: resize the list and tree based on root window size * install_steps_gtk: $width and $height goes $::rootwidth and $::rootheight, also other dimensions goes global (main::) * commands.pm (strings): replace the typo \{$n,} by {$n,} 2000-02-23 François Pons * build_archive, extract_archive: changed format of TOC to speed up extraction of archive, now 5 to 6 times faster to read TOC :-) 2000-02-22 Pixel * Xconfigurator.pm: load "Cards" database only to translate NAME to fields. Added file CardsNames created from Cards using share/Cards2CardsNames. Kind of list of normalized NAMEs * MonitorsDB: replace the ` ' separator for vendor by `|' * install_steps_interactive.pm (timeConfig): use ask_from_treelist * interactive_gtk.pm (ask_from_treelist): creation of ask_from_treelist. Usage is just the same as ask_from_list with one more argument (the separator eg: |, /) 2000-02-21 François Pons * diskdrake.pm: fixed deadlock while trying to create partition when available space is equal or less than 2 cylinders. fixed Create action on corrupted partition by removing stalling window. Blocked partition table writing if there are error by forcing user to correct partition table. * partition_table.pm: fixed typo in verifyParts with cdie, added verifyParts on Resize action. 2000-02-21 Pixel * install_steps_gtk.pm (create_big_help): display the help in full screen * my_gtk.pm (_create_window): add big help on F1 * common.pm (add2hash): now returns the first parameter * mouse.pm (detect): really defaults to serial mouse * interactive.pm: add ask_many_from_list_with_help and ask_many_from_list_with_help_ref * services.pm: creation, it handles what was in standalone/drakxservices 2000-02-18 Pixel * install_steps_gtk.pm (createXconf): added /dev/ (X wants "/dev/psaux" and not "psaux") * diskdrake.pm (Create): show start sector even for non-expert on non-i386 2000-02-16 Pixel * mouse.pm (detect): add defaults to serial mouse * install_steps_gtk.pm (createXconf): remove the defaults to serial mouse 2000-02-15 Pixel * diskdrake.pm: "After %s partition %s," inlined otherwise does not please pablo and translators... 2000-02-14 Pixel * diskdrake.pm (Create): hide start sector choice for non-expert 2000-02-11 Pixel * partition_table_raw.pm (get_geometry): do not use the cylinder number given by HDIO_GETGEO cuz limited to 16bits. Compute using the total_sectors using HDIO_GET_IDENTITY * c/stuff.xs.pm: added total_sectors (gives the number of sector of a drive) * modules.pm (load): ignore error in loading prereq's * modules.pm (@drivers_by_category): rcpci instead of rcpci45, z85230 added * commands.pm (mount): add modules::load_deps otherwise the fs::mount won't succeed insmoding vfat if needed 2000-02-11 François Pons * fixed diskdrake to handle limit case when creating and resizing partition table, address size limit and start sector limit. 2000-02-11 Pixel * install2.pm (main): add a callback on SEGV -> message printed -> that way, ENDs are called (otherwise skipped) * install_steps_interactive.pm (setup_thiskind): handles the undef value returned by load_thiskind * install_steps_interactive.pm (exitInstall): do not call install_steps::exitInstall * install_steps (exitInstall): removed * install_steps (END): added (it does ejectCdrom) * install_steps_interactive.pm (load_thiskind): returns undef if error loading a module * fs.pm (format_part): changed the prototype from $;$@ to $;@ otherwise, @options always have a value (mostly undef) and mkdosfs fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32) * install_steps_interactive.pm (setup_thiskind): add a $auto_probe_pci that overrules $o->{auto_probe_pci} (that way no pci probe the second time) 2000-02-10 François Pons * heavy modification of build_archive and extract_archive to manage a TOC directly in archive file, handle bzip2 or gzip compression, extract_archive can extract multiple files a time, with minimal invocation of uncompress program and follow symlink and expand directory contents. * use build_archive/extract_archive for locales. * fixed a min/max in install_steps_gtk for Resize/Create partition. * fixed adjustEnd with dos partition table, take care of magic 63 sectors at beginning of partitions, a more solid method should be used for that. 2000-02-10 Pixel * modules.pm (load_thiskind): skip modules "unknown" and "ignore" 2000-02-09 Pixel * partition_table.pm (add): cdie if maximum number of partitions handled by linux is reached * Xconfigurator.pm (chooseResolutionsGtk): display the graphic card or server found * install_any.pm (relGetFile): for mdkinst files, take care not to have a double '/' (see debbugs #591) * install_steps_interactive.pm (configureNetwork): purpose: add ability to configure both modem and lan clean up the behaviour * fs.pm (write_fstab): purpose: sort the fstab per mount point (cuz /usr must be before /usr/local) also: rewrite of the part writing the fstab.