2002/08/19  alus

	* share/po/pl.po: one fix

2002/08/19  Christian Belisle  <cbelisle@mandrakesoft.com>

	* standalone/draksec: 
	  - draksec is now in his own package

2002/08/19  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/network.pm: o remove old /etc/hosts entries for the hostname
	before adding new one

2002/08/19  fcrozat

	* share/rpmsrate: Make sure nautilus-gtkhtml is installed by default for
	GNOME

2002/08/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ta.po: Added Tamil file

	* share/po/pt.po: updated Portuguese file

2002/08/19  Pixel  <pixel@mandrakesoft.com>

	* Makefile.config: remove dir security

	* proxy.pm: add $Id: $

	* interactive/gtk.pm: use my_gtk {isWizard} and {isEmbedded} which are
	more accurate than
	$::isWizard && !$my_gtk::pop_it and $::isEmbedded && !$my_gtk::pop_it,
	since
	when the Plug is full, the window is not embedded.

	* install_any.pm (getAndSaveAutoInstallFloppy): ensure mount fail doesn't
	cause any pb

	* detect_devices.pm: add scsi Optical Device recognition (thanks to
	Michael Riss)
	(without this, a hard drive following the optical device gets assigned
	sda
	whereas sda is the optical device and the hard drive really is sdb)

	* fs.pm: fix checking the return value of fsck.jfs

	* my_gtk.pm: in my_gtk object, set {isEmbedded} if embedded and {isWizard}
	if displayed wizard mode

	* Xconfig/monitor.pm (readMonitorsDB): now return a list instead of a hash
	to handle same name entries with different EISA_ID
	(configure_automatic): handle EISA_ID but no VertRefresh/HorizSync
	(happens for some hardware)
	(choose): handle user asking for "Plug'n Play" monitor and ddcxinfos
	failing

	* Xconfig/main.pm: replace "xxx => eval { }" with "xxx => scalar eval {}"

2002/08/19  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: s/drakconnet/drakconnect/ (Thank you for adding this
	bug, Titi)

2002/08/19  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* modules.pm: add remove_modules

2002/08/18  alus

	* share/po/pl.po: updated translation

2002/08/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po: updated Catalan file

	* share/po/id.po, share/po/da.po: updated Danish and Indonesian files

	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian files

2002/08/18  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: since lba32 is the default in lilo.conf
	  - write "geometric" when lba32 is not set
	  - don't write lba32 (useless)

2002/08/18  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Fixed HP multi-function device
	configuration during the installation:
	  - Fixed mistyped package name for "mtoolsfm"
	 - Set links for photo card reader auto-detection to work

2002/08/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/ru.po, share/po/gl.po, share/po/pt_BR.po,
	share/po/br.po, share/po/th.po, share/po/no.po, share/po/et.po,
	share/po/ja.po, share/po/hr.po, share/po/tr.po, share/po/mt.po,
	share/po/ga.po, share/po/be.po, share/po/uk.po, share/po/ko.po,
	share/po/pl.po, share/po/fi.po, share/po/lt.po, share/po/cy.po,
	share/po/ca.po, share/po/da.po, share/po/ar.po, share/po/bs.po,
	share/po/ro.po, share/po/wa.po, share/po/is.po, share/po/af.po,
	share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/vi.po, share/po/fr.po, share/po/it.po, share/po/nl.po,
	share/po/eu.po, share/po/es.po, share/po/de.po, share/po/eo.po,
	share/po/el.po, share/po/cs.po, share/po/bg.po, share/po/lv.po,
	share/po/hu.po: updated po files

2002/08/17  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/card.pm: 
	  - allow to change the detected card
	  - the chosen card can be used for dualhead if it is dualhead

	* Xconfig/resolution_and_depth.pm: sort resolutions to default to
	1280x1024 instead of 1280x960
	if the monitor size is not given, default to 14'

	* any.pm (devfssymlinkf): use "mksymlink" instead of "symlink" so that
	devfsd doesn't give an error when the symlink already exists

	* Xconfig/proprietary.pm: 
	  - fix module not returning true
	  - don't install_matrox_hal when testing

	* Xconfig/main.pm: ensure the chosen resolution is maintained unchanged
	when changing the graphic
	card or monitor.

2002/08/17  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm: Fixes to make it possible toinstall HP's multi-function
	devices during installation.

	* scanner.pm: Let a newline character be put after the entry in
	/etc/sane.d/dll.conf, so more than one driver name can be added
	without all of them going into one line and then being unreadable.

2002/08/16  alus

	* share/po/pl.po: updated

2002/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/sl.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/sk.po: updated Slovak file

	* share/po/da.po, share/po/ko.po: updated Danish and Korean files

2002/08/16  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix "Security Administrator (login or email)" missing field

	* interactive/newt.pm: fix dialog box with empty buttons (thanks to
	Hamster <hamster@hamsternet.org>)

	* Xconfig/test.pm: raise the testing time from 8 to 12 seconds

	* my_gtk.pm (create_okcancel): do not display "Cancel" when {cancel} is
	empty string

	* bootloader.pm (add_entry): new entry will now keep its label, the
	conflicting one will be renamed "old_xxx" (and not the opposite)

	* diskdrake/interactive.pm: limit max size of loopback to 2GB on FAT

2002/08/16  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/ui.pm: insert a space between "field:" and "description"

	* harddrake/v4l.pm, harddrake/bttv.pm, standalone/drakxtv,
	install_steps_interactive.pm: 
	  - harddrake::bttv is renamed harddrake::v4l
	  - harddrake::v4l handle saa7134 too now (and not only bttv)
	  - harddrake::v4l::config need a new driver parameter in order to be
	able to offer the right cards and tuners list
	  - drakxtv: kill some old comments
	  - add the list of cards supported by saa7134
	  - add a not to remember a potentiel speedup

2002/08/15  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/drakbug: 
	  - add --incident : could be used by signal catcher to launch drakbug
	when app crash

	* standalone/drakautoinst: 
	  - explanations

2002/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/da.po, share/po/DrakX.pot, share/po/fr.po,
	share/po/fi.po, share/po/de.po: updated Danish and Hungarian files

	* share/po/zh_CN.po, share/po/gl.po, share/po/ga.po: updated Chinese file

	* share/po/hu.po: updated Chinese and hungarian files
	updated Danish and Hungarian files

	* share/po/zh_TW.po: updated Chinese and hungarian files
	updated Chinese file

2002/08/15  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakbackup: Allow non-root user to use program with personal
	config.
	Finish multisession support.
	Fix various crash scenarios in GUI in restore mode.
	Fix user restore mode to restore only what is requested.
	View archive contents before restore, user & sys mode.
	Add explanation of config file options for non-X users.

2002/08/14  alus

	* share/po/pl.po: updated translation

2002/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po, share/po/da.po: updated Catalan, Danish and Turkish
	files
	updated some po files

	* share/po/et.po, share/po/eu.po, share/po/es.po, share/po/eo.po,
	share/po/el.po: updated Vietnamese file

	* share/po/id.po, share/po/no.po, share/po/ja.po, share/po/hr.po,
	share/po/mt.po, share/po/ko.po, share/po/DrakX.pot, share/po/lt.po,
	share/po/cy.po, share/po/ar.po, share/po/wa.po, share/po/is.po,
	share/po/af.po, share/po/az.po, share/po/zh_TW.po, share/po/zh_CN.po,
	share/po/it.po, share/po/nl.po, share/po/de.po, share/po/cs.po,
	share/po/lv.po, share/po/hu.po: updated some po files

	* share/po/sp.po: Updated Slovak file
	updated some po files

	* share/po/vi.po: updated Vietnamese file
	updated some po files

	* share/po/th.po, share/po/tr.po: updated Catalan, Danish and Turkish
	files

	* share/po/ru.po, share/po/pt_BR.po, share/po/ro.po, share/po/pt.po:
	updated po files

	* share/po/sk.po, share/po/br.po, share/po/sl.po, share/po/be.po,
	share/po/uk.po, share/po/sv.po, share/po/sr.po, share/po/bs.po,
	share/po/bg.po: Updated Slovak file

2002/08/14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: reduce the width of install window

	* bootloader.pm: fix "You can't install the bootloader on a xfs partition"
	happening in weird cases (thanks to Alan Hughes)

	* standalone/diskdrake: disable embedding of WebDAV configuration since it
	is broken
	$all_hds->{hds} must be filled in any case, not only in --hd

2002/08/14  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakbackup: undo advanced_what_user I broke perl_checking
	multisession CD support

2002/08/14  Warly  <warly@mandrakesoft.com>

	* share/compssUsers.server: add LSB group

2002/08/13  alus

	* share/po/pl.po: 2 strings overlapped each other

2002/08/13  Pixel  <pixel@mandrakesoft.com>

	* network/dav.pm: nothing useful for the moment
	use ensure_is_installed

	* interactive/gtk.pm: handle the setting of 'ok' and 'cancel'

	* diskdrake/dav.pm: add checking davfs is installed
	rough WebDAV gui

	* standalone.pm: add ensure_is_installed (which was
	network::smbnfs::check_raw and is often useful)

	* standalone/diskdrake, diskdrake/interactive.pm: rough WebDAV gui

	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: use
	ensure_is_installed

2002/08/13  siegel

	* share/po/de.po: updates

2002/08/13  alus

	* share/po/pl.po: 2 strings overlapped each other
	updated translation

2002/08/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed stupid typo.
	allow selecting a choice package according to locales-xx found.

	* crypto.pm: added a true value.

	* share/rpmsrate: removed duplicate aspell-xx as DrakX will take care of
	them now.

2002/08/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/gen_locales.sh: corrected erros that made the script fail

	* share/po/eu.po, share/po/es.po, share/po/DrakX.pot, share/po/ru.po,
	share/po/ro.po, share/po/pl.po, share/po/gl.po, share/po/fi.po,
	share/po/pt_BR.po, share/po/et.po, share/po/zh_TW.po, share/po/eo.po,
	share/po/pt.po, share/po/el.po, share/po/fr.po, share/po/ga.po: updated
	Portuguese and Chinese files

	* share/po/zh_CN.po: updated Chinese file
	updated Portuguese and Chinese files

2002/08/13  Pixel  <pixel@mandrakesoft.com>

	* drakxtools.spec: require latest perl-MDK-Common

	* interactive.pm: remove completly setting 'ok' & 'cancel' since it's
	better done per
	interactive::* to handle correctly the Wizard mode
	button "Previous" and "Next" are not only there in interactive::gtk

	* standalone.pm: add ensure_is_installed (which was
	network::smbnfs::check_raw and is often useful)

	* fsedit.pm, fs.pm: backend davfs (WebDAV) support

	* interactive/gtk.pm: handle the setting of 'ok' and 'cancel'

	* interactive/http.pm, interactive/stdio.pm, interactive/newt.pm: 
	  - handle setting 'ok' && 'cancel'
	  - handle isWizard in newt (basic handling)

	* diskdrake/dav.pm: add checking davfs is installed
	rough WebDAV gui

	* Xconfig/main.pm (export_to_install_X): if monitor is p'n'p, don't save
	it for auto_install

	* network/dav.pm: nothing useful for the moment
	use ensure_is_installed
	backend davfs (WebDAV) support

	* standalone/diskdrake: rough WebDAV gui

	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: use
	ensure_is_installed

	* diskdrake/interactive.pm: rough WebDAV gui
	backend davfs (WebDAV) support

2002/08/13  siegel

	* share/po/de.po: updates

2002/08/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* drakxtools.spec: harddrake-ui doesn't have to provides kudzu

	* standalone/drakxtv: add "Australian Optus cable TV" support (need xawtv
	<= 3.76)

	* standalone/service_harddrake: check the config file isn't empty

2002/08/12  alus

	* share/po/pl.po: spell checking
	updated translation

2002/08/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: allow removing packages on upgrade.

	* pkgs.pm: fixed stupid change (almost hope it was really changes).
	fix to reduce size of already installed packages.

	* install_steps_interactive.pm: synced to force calling
	selectPackagesAlreadyInstalled in order to have
	installed and upgrade computed (necessary to known if a package is
	already
	installed or will be upgradable to compute size more precisely).

2002/08/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po, share/po/et.po, share/po/zh_TW.po, share/po/vi.po,
	share/po/eu.po, share/po/uk.po, share/po/es.po, share/po/eo.po,
	share/po/el.po: updated po files

	* share/po/zh_CN.po: updated Chinese file
	updated po files

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2, share/Makefile:
	locale name <-> charset correspondances better matching what DrakX uses

	* share/po/bs.po, share/po/br.po, share/po/be.po, share/po/cy.po,
	share/po/ca.po, share/po/cs.po, share/po/bg.po: updated Chinese file

2002/08/12  Pixel  <pixel@mandrakesoft.com>

	* standalone.pm: 
	  - add setExportedVarsInSh and setExportedVarsInCsh
	  - remove setVarsInCsh (obsoleted by setExportedVarsInCsh)

	* bootloader.pm: fix typo

	* interactive.pm: don't switch to 2 buttons dialog box if the labels are
	too long in ask_from_list
	(otherwise it's ugly (reported for XFdrake multi-head choice with 67 &
	58
	chars strings) (fix bug #62)

	* Xconfig/xfreeX.pm: create a backup of XF86Config (XF86Config.old)

	* any.pm: use setExportedVarsInSh for setting /etc/profile.d/proxy.sh so
	that http_proxy
	and ftp_proxy are exported (thanks to Pascal <pascal@vmfacility.fr>)

	* keyboard.pm, network/network.pm, install_steps.pm: 
	  - fix reading previous keyboard config on upgrade (for displaying in
	summary)
	  - ensure keyboard and mouse configuration are not overwritten if not
	explictly modified on upgrade
	  - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq"
	is needed on some box, see http://islay.dyndns.org/taz/index.html for
	more)

	* proxy.pm: allow ftp_proxy beginning with http: (thanks to Christophe
	Combelles)

	* install2.pm: 
	  - fix reading previous keyboard config on upgrade (for displaying in
	summary)
	  - ensure keyboard and mouse configuration are not overwritten if not
	explictly modified on upgrade
	  - propagate pci=xxx at install to bootloader (since "pci=bios,biosirq"
	is needed on some box, see http://islay.dyndns.org/taz/index.html for
	more)
	use $::prefix

	* mouse.pm, Xconfig/default.pm: use $::prefix

	* bootlook.pm: fix embedding

2002/08/12  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* ugtk.pm: consolidate create_factory_menu
	  - ugtk::gtkexpand : new function
	  - harddrake::ui : uses it
	write_on_pixmap: kill unused variable
	tree_set_icon: new function
	create_okcancel isn't in ugtk so don't export it (warning fix)

	* harddrake/ui.pm: print fields values in blue, paint unknown module in
	red
	consolidate create_factory_menu
	  - on exit, kill the running configurator if any
	  - modules::get_parameters : consolidate some code
	  - harddrake::ui : uses it
	  - ugtk::gtkexpand : new function
	  - harddrake::ui : uses it
	  - perl_checker fix
	  - simplifications
	  - put signals ids in %IDs
	  - consolidate duplicated disconnection code into disconnect
	tree_set_icon: new function

	* modules.pm: 
	  - modules::get_parameters : consolidate some code
	  - harddrake::ui : uses it

	* scanner.pm: update TODO list

	* harddrake/TODO: 
	  - on exit, kill the running configurator if any

2002/08/12  Warly  <warly@mandrakesoft.com>

	* share/compssUsers: update LSB text

	* share/logo-mandrake.png: logo for beta 3

	* share/rpmsrate: remove useless 2 GNOME

2002/08/11  alus

	* share/po/pl.po: updated

2002/08/11  Pixel  <pixel@mandrakesoft.com>

	* partition_table/raw.pm: add Acronis bootloader magic

	* share/rpmsrate: adding aspell-LANGS before evolution to workaround the
	choices limitation (=> allow to choose the right aspell-LANG)

	* docs/comparisons: comprehensive feature-to-feature comparison with
	redhat 8.0

	* diskdrake/interactive.pm: allow to enter any mount point even in
	non-expert (why was it still the other way??)

	* drakxtools.spec: add "PreReq: rpm-helper" in drakxtools-http as advised
	by rpmlint

	* bootloader.pm: 
	  - compare_entries is now called same_entries
	  - same_entries try hard to return true even if the files not the same
	but symlinks to the same file
	  - rework add_entry (it handles weird case which used to give old_linux
	and old2_linux even if they are the same)
	  - ensure the old failsafe entry doesn't give any old_failsafe

2002/08/11  alus

	* share/po/pl.po: updated

2002/08/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/sv.po, share/po/sr.po, share/po/sk.po,
	share/po/sp.po, share/po/af.po, share/po/sl.po, share/po/az.po,
	share/po/hr.po, share/po/ar.po, share/po/hu.po: updated some po files

	* share/po/th.po, share/po/tr.po: updated Turkish file

2002/08/11  Pixel  <pixel@mandrakesoft.com>

	* lvm.pm: 
	  - vg_add: do not vgremove the old_name anymore, this is dangerous and
	should not happen
	  - lv_create: fix bug when {primary}{normal} didn't exist
	  - use run_program::get_stdout instead of ``
	  - create and use run() and run_or_die() which takes care of running
	vgscan again when needed
	  - rename LVMname to VG_name

	* diskdrake/interactive.pm: allow to enter any mount point even in
	non-expert (why was it still the other way??)
	rename LVMname to VG_name

	* detect_devices.pm (floppies): module "floppy" can fail to insmod, in
	that case it means
	there's no floppy controller, so don't try fd0 & fd1 which may cause
	havoc
	(esp. segfault) (thanks to rcc)

	* share/rpmsrate: adding aspell-LANGS before evolution to workaround the
	choices limitation (=> allow to choose the right aspell-LANG)

	* docs/comparisons: comprehensive feature-to-feature comparison with
	redhat 8.0

	* diskdrake/hd_gtk.pm, partition_table.pm: rename LVMname to VG_name

	* fsedit.pm: get rid of the duplicated /tmp in for suggestions_mntpoint()
	(thanks to Amaury)
	  - rename LVMname to VG_name
	  - part2hd: allow rootDevice to be a VG_name
	  - add auto_allocate_vgs
	cleanup

	* fs.pm (prepare_write_fstab): no need to read the fstab once again before
	writing since reading takes care of everything, including unknown
	entries (which go to {special}). This fixes a bug when removing existing
	partition with associated mount point. It used to keep the entry in
	fstab, which is wrong (as reported by andr� <naderrt@wanadoo.fr>)

	* modules.pm (load): when isStandalone, ignore errors when loading
	unavailable modules (ie have the same behaviour as during install)

	* run_program.pm: add get_stdout (similar to rooted_get_stdout)

	* bootloader.pm: 
	  - compare_entries is now called same_entries
	  - same_entries try hard to return true even if the files not the same
	but symlinks to the same file
	  - rework add_entry (it handles weird case which used to give old_linux
	and old2_linux even if they are the same)
	  - ensure the old failsafe entry doesn't give any old_failsafe

	* network/smb.pm: fix yet another bug regarding credentials during install

	* install_steps_auto_install.pm: nice message when rebootNeeded in
	auto_install (otherwise it reboots without prompting)

2002/08/11  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Setup of HP MF devices on parallel port did
	not work. Fixed.
	Allow setup of MF device if device file name "/dev/printer/<number>" was
	entered.
	If auto-detection of model name fails, ask user always whether he has an
	MF device.
	If SNMP or local auto-detection fails but HPOJ auto-detection succeeds,
	use model name found by HPOJ.

2002/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po, share/po/sv.po: updated po file

2002/08/10  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/interactive.pm: 
	  - fix computing the minimal size for reiserfs resizing
	  - use run_program::run instead of system for calling resizing tools

	* install_any.pm: workaround perl bug another way

2002/08/10  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakbackup: GUI fixes, scp, rsync, webDAV, CD, tape support.
	Consolidate all net methods into one configure screen.
	Daemon mode, email fixed. Ran perl_checker and corrected.
	GUI feedback during various backup modes and result report.
	CD/Tape drive/media detection. Start to look at cataloging
	runs for locating restore media.

2002/08/10  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: Removed HP multi-function device configuration from SMB
	and remote LPD printer setup.
	Let the Sony IJP-V100 being treated as an HP multi-function device.
	Taken into account that the HP PhotoSmart 7150 has no photo card reader.
	Use any::get_secure_level() instead of printer::get_security_level().

	* detect_devices.pm: Scanning network for printers did not work during
	installation. Fixed.

	* printer.pm: Use any::get_secure_level() instead of
	printer::get_security_level().

2002/08/09  fcrozat

	* share/rpmsrate: No longer requires metacity-setup (everything can be
	done using gnome-control-center)
	Ensure we install enough GNOME packages when selection GNOME

2002/08/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: make sure size of packages is computed.

	* pkgs.pm: take care of packages already installed that will be removed
	(untested).

	* install_any.pm: fixed loadO when getFile is not used (local files).

	* interactive.pm: allow cancel button even for wizard.

	* install_steps_interactive.pm: small update to avoid side effect of bless
	to HASH even if nothing results from
	this.

2002/08/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po: updated Czech file

	* share/po/pt.po: updated Portuguese file

	* share/po/id.po, share/po/fr.po: updated French and Indonesian files

2002/08/09  Pixel  <pixel@mandrakesoft.com>

	* share/keyboards.tar.bz2: fix rights on files

	* tools/make_mdkinst_stage2, share/list.i386, install_any.pm: add fsck.jfs

	* any.pm, modparm.pm, harddrake/ui.pm: 
	  - fix module parameter dialog box handling
	  - enable the cancel on load_module__ask_options

	* bootloader.pm (mkinitrd): when an initrd is already there, it means an
	initrd is needed
	not the contrary (thanks to Damon Lynch for his test)

	* install_steps.pm: remove previous report.bug.gz (otherwise one get a
	report.bug *and* the previous report.bug.gz)
	(report.bug's are not rotated, ddebug.log's and install.log's are)

2002/08/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* modparm.pm: no need anymore to pass extra arguments for harddrake::ui

	* Xconfig/various.pm: perl_checker fixes

	* harddrake/TODO: module parameters're now read from /etc/modules.conf
	before being
	altered

	* harddrake/bttv.pm: resync with bttv-0.7.95, add support for :
	  - tv cards:
	o Hauppauge WinTV PVR
	  o Leadtek|WinFast VC 100
	  - tv tuners:
	  o LG NTSC (newer TAPC series)

	* drakxtools.spec: harddrake changes

	* modules.pm: mergein_conf: return options if they're set

	* harddrake/ui.pm: 
	  - module configuration window:
	o read current options
		o don't display ranges, we cannot really know when a range is
	       needed and so display them in wrong cases (kill code, enable us
	       to simplify modparm::parameters after
		o read & parse modules.conf only when configuring the module, not
	       on each click in the tree
		o move up "require module" since we use it above
		o use get_options accessor instead of direct $conf access
		o split the options string into a hash{option => value}
		o don't call several times interactive->vnew
		o fix busy cursor on window exit because of the previous change

2002/08/08  alus

	* share/po/pl.po: various changes

2002/08/08  Pixel  <pixel@mandrakesoft.com>

	* services.pm (services): better sorting of services

2002/08/08  alus

	* share/po/pl.po: various changes
	corrected errors

2002/08/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* fs.pm: make sure fsck is called for ext3 partition (due to possible
	kernel panic on
	corrupted ext3 partition, even after mounting ext3, umounting and
	remounting
	ext2).

2002/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2, keyboard.pm: Added Tamils TSCII keyboard

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/de.po,
	share/po/eo.po, share/po/lv.po, share/po/cs.po, share/po/bg.po,
	share/po/el.po, share/po/hu.po: updated pot file

	* lang.pm: Added Tamils TSCII keyboard
	Added some support for Tamil (proper KDE default fonts, and define it
	as iso8859-1 encoding for kde)

	* share/po/es.po: updated pot file
	updated Spanish file

2002/08/08  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: 
	  - remove the icons in reallyChooseGroups
	  - add the LSB group
	  - remove buttons to change theme
	  - add F5 to change the theme to the 'white' theme
	  - cleanup the theme code
	workaround a weird pb with gtk: still re-creating help Gtk::Text at each
	step :-/
	  - remove the "help" button
	  - ensure the help box is not created twice (except when changing
	theme)

	* Xconfig/xfreeX.pm (set_resolution): handle the optional $resolution->{Y}
	(@resolutions): add 1280x960
	fix typo
	replace 1152x768 with 1152x864 as it should and used to be

	* install_steps.pm: don't add users in group usb (unneeded (?), anyway
	doesn't do anything since group usb doesn't exist currently)

	* install2.pm: 
	  - remove buttons to change theme
	  - add F5 to change the theme to the 'white' theme
	  - cleanup the theme code

	* services.pm (services): better sorting of services

	* install_any.pm, timezone.pm: use $::prefix in timezone::read
	timezone::read now returns a hash

	* install_gtk.pm: 
	  - remove buttons to change theme
	  - add F5 to change the theme to the 'white' theme
	  - cleanup the theme code
	workaround a weird pb with gtk: still re-creating help Gtk::Text at each
	step :-/
	  - remove the "help" button
	  - ensure the help box is not created twice (except when changing
	theme)

	* Xconfig/various.pm (tvout): rough default value for PAL vs NTSC
	(configure_FB_TVOUT): add ModeLines (Florent Beranger says it displays
	better with them)

	* any.pm: 
	  - write_passwd_user: ensure {pw} is set (at least '')
	  - cleanup dead code
	(ask_window_manager_to_logout): adapt to new gnome
	sort security level descriptions

	* my_gtk.pm: do not hard code icon path
	  - remove buttons to change theme
	  - add F5 to change the theme to the 'white' theme
	  - cleanup the theme code

	* Xconfig/card.pm, Xconfig/monitor.pm, Xconfig/main.pm: when prompting for
	VideoRam, default to the value obtained via DDC

	* Xconfig/resolution_and_depth.pm: handle the pb of resolutions where X
	doesn't imply Y (eg: 1280x1024 and 1280x960)

	* standalone/adduserdrake: 
	  - fix detecting use of MD5 and shadow passwords
	  - cosmetic move of any::addUsers

2002/08/08  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm, install_steps_interactive.pm: Windows PDC -> Windows
	Domain, don't make samba dirs - samba fixed now

2002/08/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* scanner.pm: old hp scanners report themselves as "Processor"s as :
	  - tested in hw lab
	  - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners
	use this"
	  - reported by sane-find-sane: "old HP scanners use the CPU id"

	* detect_devices.pm: explain the fscking "Processor" need
	old hp scanners report themselves as "Processor"s as :
	  - tested in hw lab
	  - written in linux/include/scsi/scsi.h: "TYPE_PROCESSOR.*HP scanners
	use this"
	  - reported by sane-find-sane: "old HP scanners use the CPU id"

2002/08/07  Christian Belisle  <cbelisle@mandrakesoft.com>

	* security/shorewall.pm: shorewall-related functions will go here.

2002/08/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added automatic update of lilo image and KDE & GNOME
	background.

	* install2.pm: allow automatic oem patch. add log if successfull patching.

	* install_steps_interactive.pm: do not ask user to select ignored medium.

	* crypto.pm: allow patching of mirror used.

	* pkgs.pm: call rpmReadConfigFiles before installing packages.
	do not read package of ignored medium (contrib) to save memory.

	* install_any.pm: getAndSaveFile now return before writing zero-length
	file if input file doesn't
	exists on invocation.

2002/08/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po: updated Vietnamese file

2002/08/07  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/card.pm: load glx in any case (well except for nvidia
	proprietary shit)

	* fs.pm: "LABEL=xxx" in fstab handling

	* bootlook.pm: replace glob() with all()

	* network/netconnect.pm (get_profiles): get rid of "glob", clean it up

2002/08/06  alus

	* share/po/pl.po: updated translation

2002/08/06  Daouda Lo  <daouda@mandrakesoft.com>

	* network/tools.pm: 
	  - set the vpi vci correctly according to selected country.

2002/08/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added log to follow dead lock to check what may cause it).

2002/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/cvslog2changelog.pl: add warly,jgotti

2002/08/06  Jonathan Gotti  <jgotti@mandrakesoft.com>

	* bootlook.pm: add standalone::explanations for bootsplash configuration

2002/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: Increased the level of "yudit"; it's one of the editors
	with best utf-8
	support, so very useful to have.

	* share/po/fr.po, share/po/wa.po: updated French and Walloon files
	Put _() around two strings in security level choosing

	* share/po/DrakX.pot: updated French and Walloon files

	* any.pm, share/po/pl.po: Put _() around two strings in security level
	choosing

2002/08/06  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, Xconfig/xfree4.pm,
	Xconfig/parse.pm: make wacom config work

	* bootloader.pm (get_kernels_and_labels): only take kernels for which we
	have the corresponding /lib/modules/VERSION (otherwise mkinitrd will
	fail)

	* run_program.pm (raw): new function allowing special options like
	{timeout}

	* fsedit.pm: 
	  - add /tmp in %suggestions for server partitioning
	  - tweak some ratio's in %suggestions

	* any.pm (ddcxinfos): use the new run_program::raw with a 20s timeout to
	workaround ddcxinfos going wild using 100% system CPU

	* detect_devices.pm, my_gtk.pm, install_any.pm: make perl_checker happy

	* standalone.pm: add "use run_program" as needed

2002/08/06  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakTermServ: typo, change /etc/exports explanation in help

2002/08/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/data.pm: make perl_checker happier :-)
	  - dont detect undef devices
	detect modem too
	  - rename scanner::findScannerUsbport  as scanner::detect
	as in mouse.pm
	  - scanner::detect : detect SCSI scanners too

	* drakxtools.spec: log changes

	* network/modem.pm: nobody pass the second argument of
	network::modem::modem_detect_backend() so let simplify it

	* standalone/scannerdrake: 
	  - rename scanner::findScannerUsbport  as scanner::detect
	as in mouse.pm
	  - scanner::detect : detect SCSI scanners too

	* ugtk.pm: remove old references to rectangle drawing around mcc icons

	* scanner.pm: make perl_checker happier :-)
	  - dont detect undef devices
	  - rename scanner::findScannerUsbport  as scanner::detect
	as in mouse.pm
	  - scanner::detect : detect SCSI scanners too

2002/08/05  Pixel  <pixel@mandrakesoft.com>

	* share/list: switch to thread-multi

	* any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it

	* drakxtools.spec: rebuild for perl thread-multi

	* rescue/list.sparc, rescue/list.x86_64, rescue/list.i386,
	rescue/list.ia64, rescue/list, rescue/list.alpha, rescue/list.ppc: 
	  - adapt to thread-multi
	  - packdrake.pm is now out of arch dir

2002/08/05  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm: smbpasswd call deferred with addToBeDone

2002/08/05  alus

	* share/po/pl.po: removed unused strings
	updated translation, ugh... after second beta so much changes??

2002/08/05  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/logdrake: 
	  - do not show empty wizard when save button clicked.
	  - cleanup (remove all sms stuffs: code and labels)
	  - do not expand mail address

2002/08/05  gbeauchesne

	* Makefile: lib64 fixes
	  - Move xf86Wacom.so modules to {i386,ppc}-specific filelist
	  - Make filelists lib64 aware with LIB variable
	  - Add x86_64-specific filelist

	* share/list.i386, Makefile.config, share/list, share/list.x86_64,
	share/list.ppc: 
	  - Move xf86Wacom.so modules to {i386,ppc}-specific filelist
	  - Make filelists lib64 aware with LIB variable
	  - Add x86_64-specific filelist

2002/08/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* drakxtools.spec: 1.1.9-5mdk
	1.1.9-4mdk

	* my_gtk.pm: the state can be XXX also in flat mode, for disabling
	the setting of the state

2002/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
	share/po/ko.po, share/po/DrakX.pot, share/po/sr.po, share/po/pl.po,
	share/po/fi.po, share/po/lt.po, share/po/cy.po, share/po/ca.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/vi.po, share/po/fr.po, share/po/it.po,
	share/po/nl.po, share/po/eu.po, share/po/es.po, share/po/de.po,
	share/po/eo.po, share/po/el.po, share/po/cs.po, share/po/bg.po,
	share/po/lv.po: updated pot file

	* share/po/sv.po, share/po/da.po, share/po/hu.po: updated pot file
	updated po files

	* share/po/tr.po, share/po/pt.po: updated po files
	updated pot file

2002/08/05  Pixel  <pixel@mandrakesoft.com>

	* tools/Makefile: packdrake.pm is now in vendorlib

	* commands.pm: make perl_checker happy

	* bootlook.pm, standalone/printerdrake, standalone/draksec,
	standalone/drakfloppy, standalone/drakxservices, standalone/drakfont,
	standalone/drakautoinst, my_gtk.pm, standalone/drakconnect,
	standalone/drakgw, standalone/XFdrake, standalone/tinyfirewall,
	standalone/keyboarddrake, standalone/drakTermServ,
	standalone/mousedrake, standalone/scannerdrake: replace "kill USR1" with
	"kill 'USR1'" (and same for USR2)
	(so that 'use strict' works)

	* drakxtools.spec: rebuild for perl thread-multi

	* diskdrake/smbnfs_gtk.pm: adapt to ugtk

	* standalone.pm (install): verify at least one package is not installed
	before displaying a
	wait_message and calling urpmi (thanks to Jure Repinc)
	(is_installed): use run_program and redirect stdout to dave null for
	cleanness

	* Xconfig/card.pm: fix Option's (especially for XFree3)
	don't have Utah GLX the default. XFree4 is the default

	* share/list: switch to thread-multi
	packdrake.pm is now in vendorlib

	* Xconfig/main.pm: call the "Quit" button exit during install (as
	suggested by David Sansome)

	* any.pm, mouse.pm: do the job of devfsd in case devfsd doesn't do it

	* install_steps_interactive.pm: as suggested by Buchan Milne, defaults
	LDAP Server to ldap.DOMAINNAME

	* Xconfig/xfree4.pm: still have HorizSync and VertRefresh for Plug'n Play
	monitors
	(XFree4 still need some help)

	* standalone/drakboot: replace "kill USR1" with "kill 'USR1'" (and same
	for USR2)
	(so that 'use strict' works)
	a few more fixes (thanks Jure Repinc & Richard Burt)

2002/08/05  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm: smbpasswd call deferred with addToBeDone

2002/08/05  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: Make/Model/Driver list in expert mode: Fixed bug of
	"recommended" driver entries getting a duplicate entry without
	"recommended" when entering the list via double-click on existing queue
	/ "Printer manufacturer, model, driver".
	Finished auto-detection of network and SMB printers.
	Added automatic configuration of HP's multi-function devices when
	connected via HP JetDirect (network).

	* printer.pm: Finished auto-detection of network and SMB printers.
	Added automatic configuration of HP's multi-function devices when
	connected via HP JetDirect (network).

2002/08/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* modules.pm: 
	  - export %modules::conf
	  - kill modparm::raw_parameters and modparm::parameter_type
	which get merged back in modparm::parameters
	  - add more parameters to modparm::parameters for harddrake
	 harddrake/ui.pm |   19 ++++++++++---------
	 modparm.pm      |   33 +++++++++------------------------
	   2 files changed, 19 insertions(+), 33 deletions(-)

	* install_steps_gtk.pm, network/network.pm, log.pm, install_steps.pm,
	interactive.pm, bootloader.pm, harddrake/data.pm, steps.pm,
	install_steps_interactive.pm, keyboard.pm, printer.pm, lang.pm,
	fsedit.pm, install2.pm, detect_devices.pm, common.pm, commands.pm:
	s/__END__/1;
	kill "wonderful perl"

	* harddrake/ui.pm: 
	  - export %modules::conf
	  - kill modparm::raw_parameters and modparm::parameter_type
	which get merged back in modparm::parameters
	  - add more parameters to modparm::parameters for harddrake
	 harddrake/ui.pm |   19 ++++++++++---------
	 modparm.pm      |   33 +++++++++------------------------
	   2 files changed, 19 insertions(+), 33 deletions(-)
	no one use second paramater of raw_parameters
	factorize some code in modparm::parameter_type
	s/__END__/1;

	* modparm.pm: 
	  - export %modules::conf
	  - kill modparm::raw_parameters and modparm::parameter_type
	which get merged back in modparm::parameters
	  - add more parameters to modparm::parameters for harddrake
	 harddrake/ui.pm |   19 ++++++++++---------
	 modparm.pm      |   33 +++++++++------------------------
	   2 files changed, 19 insertions(+), 33 deletions(-)
	no one use second paramater of raw_parameters
	factorize some code in modparm::parameter_type

	* standalone/service_harddrake.sh: english fixes

	* standalone/logdrake, scanner.pm, standalone/drakautoinst,
	standalone/drakgw, standalone/scannerdrake: kill $Log (487 useless lines
	supressed from drakxtools)

2002/08/04  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm, install_steps_interactive.pm: partial rework of Windows
	PDC authentication, still need
	to run smbpasswd after network is up

2002/08/04  Till Kamppeter  <till@mandrakesoft.com>

	* detect_devices.pm, printerdrake.pm: Accelerated network scanning for
	printers by applying "nmap" only to machines which answered to a
	broadcast ping before.
	Completed network/SMB printer auto-detection for recommended mode.
	Started network/SMB printer auto-detection for expert mode.

2002/08/02  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/logdrake: 
	  - expand $email in cron script
	  - disable sms alerts (free sms site too complicated to
	handle). Postponed
	  - mail service should work now
	  - clean up code
	  - give the correct right to cron file to work correctly
	  - fix titi mess

	* standalone/drakbug: 
	  - avoiding looping indefinitalely when selecting items in combo
	  - add commandline arguments: drakbug --report name_app

2002/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive/gtk.pm, my_gtk.pm: move interactive::gtk::exit to
	my_gtk::exit so that my_gtk
	apps can call it (and fix busy mouse cursor problem that way)

2002/08/02  jgotti

	* standalone/drakboot: minor bugfix in calling bootloader::read

2002/08/02  Pixel  <pixel@mandrakesoft.com>

	* drakxtools.spec: keyboarddrake now handles choosing toggle key
	(XkbOptions)

2002/08/02  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm: Corrected strings for printer queue list in main window.

2002/08/02  warly

	* share/rpmsrate, share/compssUsers: add lsb group

2002/08/01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: drop keyboard unsafe when not unsafe
	anymore
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

	* Xconfig/various.pm: finish tvout configuration

	* any.pm, Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm,
	install_steps.pm, Xconfig/parse.pm, Xconfig/default.pm, commands.pm,
	printerdrake.pm: 
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

	* bootloader.pm (duplicate_kernel_entry): added

	* keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

2002/08/01  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: Added stuff for scanning network for SMB printer
	shares.

	* detect_devices.pm: Added facility to scan network for SMB/Windows-hosted
	printers.

2002/08/01  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* Makefile.config, drakxtools.spec: drakconf is dead

	* harddrake/ui.pm, harddrake/TODO: update

2002/08/01  warly

	* share/logo-mandrake.png: new logo for beta 2

2002/08/01  alus

	* share/po/pl.po: updated translation

2002/08/01  dam's <dams@idm.fr>

	* ugtk.pm: removed fonctions typage

2002/08/01  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/netconnect.pm, network/adsl.pm: 
	  - First ECI adsl support step

2002/08/01  gbeauchesne

	* rescue/make_rescue_img: While stripping libraries, note that we may need
	to have both /lib and
	/lib64 on biarch systems.
	  - MDK::Common'ize for arch() support
	  - Don't grab /lib/i686/ libraries
	  - Update list to use LIB which expands to either lib64 or lib

	* rescue/list.x86_64: Add x86_64-specific filelist

	* docs/HACKING: Add /bin/mknod to command list of sudoers

	* mdk-stage1/disk.c: Add missing includes, <string.h> for bzero()

	* rescue/list: 
	  - MDK::Common'ize for arch() support
	  - Don't grab /lib/i686/ libraries
	  - Update list to use LIB which expands to either lib64 or lib

2002/08/01  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/base.png, share/selected.png, share/rpm-semiselected.png,
	share/rpm-installed.png, share/rpm-unselected.png, share/installed.png,
	share/rpm-base.png, share/semiselected.png, share/unselected.png,
	share/rpm-selected.png: change some png files names according to
	simplification of
	gtkcreate_png call of new my_gtk.pm

	* drakxtools.spec, ugtk.pm, my_gtk.pm: commit according to 1.1.9-1mdk of
	drakxtools, and especially:
	  - integrate patches in my_gtk and ugtk for new rpmdrake:
	  - [ugtk] add "gtkentry" so that we can create an entry and set
	    initial value in one call
	  - [my_gtk::main] don't set the events, to fix keyboard focus
	    problem in entries when embedded
	  - [my_gtk::_create_window] add $::noBorder, to not have a frame
	    in the main window, so that it's possible to end up with
	    windows with no border
	  - [my_gtk] add ask_dir which is a ask_file with only the dir list
	  - [my_gtk] add ask_browse_tree_info to the export tags, and:
	  - add support for parents with no leaves, so that then we can
	    partially build the trees (for speedup)
	  - add "delete_all" and "delete_category" callbacks
	  - use Gtk::CList::clear when removing all the nodes, much
	    speedup

2002/08/01  jgotti

	* bootlook.pm: 
	  - add splash theme section

	* pixmaps/nosplash_thumb.png: add pixmap for drakboot

2002/08/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Hungarian file

	* share/po/vi.po: updated vietnamese file

2002/08/01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: drop keyboard unsafe when not unsafe
	anymore
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

	* any.pm: 
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE
	get rid of some $prefix parameter passing (using $::prefix where needed
	instead)

	* Xconfig/various.pm: finish tvout configuration

	* ugtk.pm, my_gtk.pm: move back Gtk->init to "new" and "gtkroot"
	make perl_checker happy

	* Xconfig/parse.pm: 
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE
	BusID needs a string (thanks to Florent BERANGER)

	* standalone.pm: don't display a wait_message in newt, but do suspend

	* install_any.pm: get rid of some $prefix parameter passing

	* pkgs.pm, fsedit.pm: get rid of some $prefix parameter passing (using
	$::prefix where needed instead)

	* loopback.pm (prepare_boot): use $::prefix

	* interactive/gtk.pm: fix the many warnings when {icon} is not given

	* Xconfig/resolution_and_depth.pm: in newt, have the resolutions sorted by
	resolution size (wilplizgg)

	* install_steps.pm: 
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE
	get rid of some $prefix parameter passing
	get rid of some $prefix parameter passing (using $::prefix where needed
	instead)
	bootloader::suggest uses a hash for its options

	* .perl_checker: tune perl_checker

	* Xconfig/xfreeX.pm, standalone/keyboarddrake, install2.pm,
	Xconfig/default.pm, commands.pm, printerdrake.pm: 
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

	* keyboard.pm: don't have "unsafe" in /etc/sysconfig/keyboard
	  - the old $o->{keyboard} is now $o->{keyboard}{KEYBOARD}
	  - KBCHARSET is $o->{keyboard}{KBCHARSET}
	  - isNotDelete is $o->{keyboard}{BACKSPACE} (as written in
	sysconfig/keyboard)
	  - add GRP_TOGGLE which gives XkbOptions "grp:GRP_TOGGLE"
	  - add dialog box to choose GRP_TOGGLE

	* bootloader.pm (duplicate_kernel_entry): added
	get rid of some $prefix parameter passing (using $::prefix where needed
	instead)
	bootloader::suggest uses a hash for its options

2002/08/01  Till Kamppeter  <till@mandrakesoft.com>

	* share/rpmsrate: Added new packages needed by printerdrake.

	* printerdrake.pm: Let packages "nmap" and "scli" get installed by
	printerdrake.
	Printer model auto-detection for ethernet-connected printers when
	setting up TCP/Socket, remote LPD, IPP, or HTTP printers.
	Continued work on scanning the local network for printers.
	In "setup_local()": Renamed variable "@parport" to "@autodetected".
	Do not let list of auto-detected printers get sorted alphabetically, it
	should stay sorted by ports.
	Fixed typo in file name in "check_network()".

2002/08/01  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm: perl_checker fix

	* drakxtools.spec: drakconf is dead
	17mdk: stage 1
	my_gtk:
	  - splitup it into my_gtk and ugtk as done by dams
	  - resync with dams
	  - increase the icon blinkage from 50ms to 100ms
	%postun -n harddrake: return 0 when nothing has to be done

	* ugtk.pm: we already require perl-GTK-GdkImLib so temporary disable
	Gtk::Gdk::Pixbuf support, thus removing all gdk/gtk warnings
	remove INFO warnings
	my_gtk:
	  - splitup it into my_gtk and ugtk as done by dams
	  - resync with dams
	  - increase the icon blinkage from 50ms to 100ms

	* my_gtk.pm: my_gtk:
	  - splitup it into my_gtk and ugtk as done by dams
	  - resync with dams
	  - increase the icon blinkage from 50ms to 100ms

	* tinyfirewall.pm: kill stupide style
	perl_checker fixes

	* standalone/harddrake2: export license
	move embedded and standalone managment from harddrake::ui to
	standalone/harddrake2

	* harddrake/TODO: update
	move embedded and standalone managment from harddrake::ui to
	standalone/harddrake2

	* harddrake/ui.pm: update
	add_icon_path is exported in :various
	perl_checker fixes
	perl_checker fixes
	  - workaround for the busy mouse cursor set by
	gtkset_mousecursor_wait() in my_gtk::destroy
	  - remove debugging prints
	
	  - don't handle "$::isEmbedded ? kill('USR1', $::CCPID) :
	  Gtk->exit(0);", it's done by interactive->exit()
	export license
	move embedded and standalone managment from harddrake::ui to
	standalone/harddrake2

	* standalone/logdrake, harddrake/bttv.pm, standalone/drakconnect,
	standalone/drakbug, standalone/tinyfirewall, standalone/scannerdrake,
	standalone/drakxtv: perl_checker fixes

	* standalone/drakxconf: remove obsolote file

	* Makefile.config: drakconf is dead

	* tools/cvslog2changelog.pl: use new dam's email

	* scanner.pm, harddrake/data.pm: perl_checker fixes
	perl_checker fixes

2002/07/31  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/card.pm, Xconfig/main.pm: 
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	(still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)

	* bootlook.pm, network/network.pm, resize_fat/main.pm,
	network/netconnect.pm, Xconfig/xfreeX.pm, diskdrake/interactive.pm,
	network/ethernet.pm, printer.pm, detect_devices.pm,
	resize_fat/info_sector.pm, install_any.pm: make perl_checker happy again
	(replacing "{xx}->{yy}" by "{xx}{yy}")

	* any.pm (devfssymlinkf): when creating a symlink on the system, use devfs
	name if devfs is mounted

	* standalone/logdrake, standalone/draksec, standalone/drakxservices,
	standalone/drakautoinst, standalone/drakproxy, standalone/tinyfirewall,
	standalone/keyboarddrake, standalone/drakboot, standalone.pm,
	standalone/drakTermServ, standalone/net_monitor, standalone/diskdrake,
	standalone/mousedrake, standalone/drakbackup, standalone/printerdrake,
	standalone/drakfloppy, standalone/drakfont, standalone/drakconnect,
	standalone/drakgw, standalone/scannerdrake, standalone/drakxtv: Handle
	parsing --embedded command line in standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/

	* standalone/XFdrake: Handle parsing --embedded command line in
	standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	  (still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)

	* Xconfig/various.pm: make perl_checker happy again (replacing
	"{xx}->{yy}" by "{xx}{yy}")
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	(still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)

2002/07/31  Christian Belisle  <cbelisle@mandrakesoft.com>

	* security/msec.pm: 
	  - Fix page change between checks -> advanced
	  - Factorize options-related functions
	  - s/choose_options/choose_functions
	  - Added security checks page
	  - put the basic button on top (in the advanced page)
	  - move set_server_link in the ignore list temporary

	* security/main.pm: 
	  - Factorize options-related functions
	  - s/choose_options/choose_functions
	  - Added security checks page
	  - factorize functions (many functions -> one function)

2002/07/31  Daouda Lo  <daouda@mandrakesoft.com>

	* share/rpmsrate: 
	  - s/GNOME/X/ for gnome-linuxconf

	* standalone/drakbug: 
	  - many changes
	  - command line support (--report name_of_program), to be used in tools
	  - ergonomy fixes (use table to align widget correctly)

2002/07/31  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* run_program.pm: 
	  - fix $ENV{HOME} value to '/root' if usermode break it

2002/07/31  gbeauchesne

	* c/Makefile.PL: lib64 fixes

2002/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/cdrom.c: hopefully fix "device or resource busy" problem in
	cdrom
	automatic mode (I messed up between truth value and number in a
	list... the first value is numbered "0" whicih is "false"...)

2002/07/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/help-it.pot, share/po/ca.po,
	share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po,
	share/po/wa.po, share/po/is.po, share/po/af.po, share/po/az.po,
	share/po/zh_TW.po, share/po/zh_CN.po, share/po/vi.po, share/po/fr.po,
	share/po/nl.po, share/po/it.po, share/po/help-fr.pot, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po,
	share/po/cs.po, share/po/bg.po, share/po/hu.po: updated pot file

	* share/po/pt.po, share/po/eu.po: updated Portuguese file
	updated pot file

2002/07/31  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/main.pm: 
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	(still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)

	* install_steps_interactive.pm, printerdrake.pm, pkgs.pm, network/adsl.pm,
	modules.pm, commands.pm, install_interactive.pm, install_steps_gtk.pm,
	interactive/stdio.pm, services.pm, keyboard.pm: make new perl_checker
	happy
	make new perl_checker happy (and that's not easy!)

	* any.pm (devfssymlinkf): when creating a symlink on the system, use devfs
	name if devfs is mounted
	replace "$foo" with $foo
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* Xconfig/test.pm: change the location of X test image as told by dadou

	* Xconfig/resolution_and_depth.pm (choose_gtk): ensure the response is one
	of @resolutions (so that Y and maybe bios is kept)
	(to_string): created
	fix using $_ instead of $_[0] (thanks to perl_checker)
	make new perl_checker happy (and that's not easy!)

	* network/modem.pm: replace "$foo" with $foo

	* resize_fat/info_sector.pm, Xconfig/xfreeX.pm: make perl_checker happy
	again (replacing "{xx}->{yy}" by "{xx}{yy}")

	* printer.pm, install_any.pm, detect_devices.pm: make perl_checker happy
	again (replacing "{xx}->{yy}" by "{xx}{yy}")
	replace "$foo" with $foo
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* bootlook.pm, network/netconnect.pm, network/ethernet.pm: make
	perl_checker happy again (replacing "{xx}->{yy}" by "{xx}{yy}")
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* network/tools.pm, install_gtk.pm, network/isdn.pm: replace "$foo" with
	$foo
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* my_gtk.pm (create_box_with_title): create an empty box when there is no
	message
	(also don't set $o->{box} since unused outside of this function)
	replace "$foo" with $foo
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* Xconfig/card.pm: 
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	(still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)
	handle cancel in xfree_and_glx_choose
	default VideoRam choice 4096 when needVideoRam
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* network/network.pm: make perl_checker happy again (replacing
	"{xx}->{yy}" by "{xx}{yy}")
	replace "$foo" with $foo
	  - have is_ip return the 4 parts of the ip address
	  - cleanup
	make new perl_checker happy (and that's not easy!)

	* interactive/gtk.pm: allow "icon" to use the icon path
	make new perl_checker happy (and that's not easy!)

	* Makefile, crypto.pm: make new perl_checker happy

	* Xconfig/monitor.pm: fix keeping the existing name when choosing monitor

	* resize_fat/main.pm: make perl_checker happy again (replacing
	"{xx}->{yy}" by "{xx}{yy}")
	make new perl_checker happy

	* standalone/mousedrake: Handle parsing --embedded command line in
	standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
	what is needed for usbmouse is "hid mousedev usbmouse" not the weird
	"serial_usb"
	make new perl_checker happy

	* mouse.pm (read): don't look at /dev/mouse symlink to get {device},
	sysconfig/mouse
	gives it, so why bother (this fixes /dev//dev/misc/psaux bug)
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* standalone/logdrake, standalone/tinyfirewall, standalone/drakboot,
	standalone.pm, standalone/drakTermServ, standalone/net_monitor,
	standalone/drakbackup, standalone/printerdrake, standalone/drakconnect,
	standalone/drakxtv, standalone/draksec, standalone/drakxservices,
	standalone/drakautoinst, standalone/drakproxy, standalone/diskdrake,
	standalone/drakfloppy, standalone/drakfont, standalone/scannerdrake:
	Handle parsing --embedded command line in standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/

	* standalone/keyboarddrake, standalone/drakgw: Handle parsing --embedded
	command line in standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
	make new perl_checker happy

	* install2.pm: allow acceptLicence to be automatic
	make new perl_checker happy
	make new perl_checker happy (and that's not easy!)

	* diskdrake/interactive.pm: make perl_checker happy again (replacing
	"{xx}->{yy}" by "{xx}{yy}")
	make new perl_checker happy (and that's not easy!)

	* standalone/XFdrake: Handle parsing --embedded command line in
	standalone.pm
	=> allows to remove the somewhat mythical
	$::isEmbedded = ($::XID, $::CCPID) = "@ARGV" =~ /--embedded (\w+) (\w+)/
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	  (still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)
	use configure_chooser when there is an existing configuration

	* log.pm, interactive.pm, resize_fat/fat.pm, network/smb.pm, raid.pm,
	partition_table.pm, diskdrake/hd_gtk.pm, install_steps.pm, swap.pm,
	resize_fat/directory.pm, devices.pm, lang.pm, partition_table/raw.pm,
	bootloader.pm, fsedit.pm, network/isdn_consts.pm: make new perl_checker
	happy (and that's not easy!)

	* Xconfig/various.pm: make perl_checker happy again (replacing
	"{xx}->{yy}" by "{xx}{yy}")
	  - add non-wizard ability to XFdrake
	  - first part of ATI TVout support
	(still needs patching initscript, and adding an entry in bootloader)
	  (and testing of course :)
	(info): fix displaying depth

2002/07/31  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: Started working on network printer auto-detection.

	* detect_devices.pm: Added subroutines for ethernet printer
	auto-detection.

2002/07/31  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/ui.pm: 
	  - bump harddrake version
	  - module configuration is saved (todo: read the config)
	initial configuration window for modules. nothing is done yet.
	remove latest (?) gtk warnings
	don't display bogus fields
	in embedded mode, don't kill the main gtk app (aka drakconf) but
	only harddrake
	  - add embedded mode for drakconf
	further simplification
	  - the hw tree and the info text are auto-size now
	  - further ui simplifications
	still more my_gtk simplifications
	 ui.pm |   49 ++++++++++++++++---------------------------------
	 1 files changed, 16 insertions(+), 33 deletions(-)
	  - simplify Gtk::Text filling
	
	  - less gtk warnings get printed
	further my_gtk simplifications
	further my_gtk simplifications
	further use of my_gtk
	  - remove useless realizations
	
	  - simplify ctree and frames creation
	  - make used once callbacks be anonymous functions
	
	  - replace scores of useless ->show() call by one show_all() call
	
	
	 ui.pm |   82
	+++++++++++++++++++++++++++---------------------------------------
	 1 files changed, 34 insertions(+), 48 deletions(-)

	* printer.pm: "cp -a" doesn't need "echo yes|"

	* modparm.pm: split parameters in raw_parameters and parameters.
	raw_parameters is
	used by harddrake to list module options in order to offer a module
	configuration window.

	* harddrake/TODO: update
	  - bump harddrake version
	  - module configuration is saved (todo: read the config)
	in embedded mode, don't kill the main gtk app (aka drakconf) but
	only harddrake
	  - add embedded mode for drakconf
	  - bump version number
	  - fix pcmcia network card detection (no more unknown)
	  - fix scsi detection :
	
		o fix SCSI controllers detection (no more unknown)
	
		o fix misdetection of scsi devices as scsi host adapter
	
		o fix double scsi devices detection (both unknown and real
		  category)
	
	  - update TODO list

	* Makefile: rename a few target:
	  - srpm -> slowsrpm
	  - fastsrpm -> srpm

	* drakxtools.spec: 15mdk (will be released tomorrow before the beta2)
	don't require detect-lst, it'll take harddrake instead :-(
	14mdk

	* harddrake/data.pm: 
	  - bump harddrake version
	  - module configuration is saved (todo: read the config)
	  - bump version number
	  - fix pcmcia network card detection (no more unknown)
	  - fix scsi detection :
	
		o fix SCSI controllers detection (no more unknown)
	
		o fix misdetection of scsi devices as scsi host adapter
	
		o fix double scsi devices detection (both unknown and real
		  category)
	
	  - update TODO list

	* share/po/fr.po: update fr translation

2002/07/30  alus

	* share/po/pl.po: variuos fixes and updates
	updates

2002/07/30  Christian Belisle  <cbelisle@mandrakesoft.com>

	* security/libsafe.pm: 
	  - complete re-write of draksec. splitted all the libsafe related
	functions
	in this file.

	* security/msec.pm, standalone/draksec: 
	  - complete re-write

	* security/main.pm: 
	  -complete re-write of draksec. The main functions will go in this
	file.

2002/07/30  Daouda Lo  <daouda@mandrakesoft.com>

	* Makefile.drakxtools: 
	  - mv drakbug executable from $$SBINDEST to $$BINDEST

2002/07/30  gbeauchesne

	* tools/Makefile, tools/aewm-drakx/Makefile: lib64 fixes

2002/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/hr.po, share/po/tr.po,
	share/po/mt.po, share/po/ga.po, share/po/be.po, share/po/uk.po,
	share/po/sv.po, share/po/sr.po, share/po/pl.po, share/po/fi.po,
	share/po/lt.po, share/po/sp.po, share/po/cy.po, share/po/ca.po,
	share/po/da.po, share/po/ar.po, share/po/bs.po, share/po/ro.po,
	share/po/wa.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
	share/po/bg.po, share/po/lv.po, share/po/hu.po: reflect errata changes

	* install_steps_interactive.pm: have errata in parameter to not break too
	much updates
	8.2->9.0
	s/82errata.php3/90errata.php3/

2002/07/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po: updated po file

2002/07/30  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: 
	  - call fsck.jfs before mounting read-write (otherwise mount simply
	fails)
	  - propose fsck -y for ext2 when fsck -a fails

	* standalone/drakbackup: never EVER put $xxxx in to-be-translated
	strings!!

	* diskdrake/interactive.pm (Add2LVM): for LVM on RAID, ensure the RAID is
	created & enabled

	* Xconfig/parse.pm: fix handling of commented empty line

	* standalone/drakautoinst: use $o->{interactiveSteps} instead of
	@install_steps_auto_install::graphical_steps

	* keyboard.pm, c/stuff.xs.pl, detect_devices.pm, install_steps.pm: use usb
	keyboard bCountryCode to choose the right keyboard

	* install_steps_interactive.pm: use usb keyboard bCountryCode to choose
	the right keyboard
	  - call fsck.jfs before mounting read-write (otherwise mount simply
	fails)
	  - propose fsck -y for ext2 when fsck -a fails

2002/07/30  Till Kamppeter  <till@mandrakesoft.com>

	* printerdrake.pm: Better placement for waiting message.

	* printer.pm: Fixed a typo and a comment in the "SIGHUP_daemon()"
	function.

2002/07/30  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: further translations
	update fr translation

	* standalone/drakbackup: don't translate useless strings (here: "\n")

	* standalone/drakbug: deush need to learn english

2002/07/29  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (g_auto_install): also save chosen on_services (this is
	the only thing left to do to make it work :)

	* mouse.pm: 
	  - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not
	install
	  - don't display "Please test the mouse" either
	allow to not mess with X config auxmouse
	(that way mousedrake doesn't need to care about it)

	* run_program.pm: fix rooted() when chrooted and saving the result in a
	perl variable

	* Xconfig/resolution_and_depth.pm (configure_auto_install): really use
	resolution_wanted given in $o

	* partition_table.pm: cleanup

	* services.pm (ask_standalone_gtk, ask_install): only return the
	on_services (those
	functions used to return ($l, $on_services) which used in a scalar
	context
	returned $on_services)

	* standalone/mousedrake: 
	  - fix using deprecated Xconfig.pm
	  - document dam's hack for test mouse
	  - cleanup
	  - don't bother reading XFree mouse config
	(using keep_auxmouse_unchanged of mouse::write_conf)

	* diskdrake/interactive.pm: nicer error message when "You can't create a
	new partition
	(since you reached the maximal number of primary partitions).
	First remove a primary partition and create an extended partition."

	* printer.pm: make perl_checker happy

	* standalone/XFdrake: make perl_checker happy
	(ask_for_X_restart): make it work

2002/07/29  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm: Fixed some "$prefix" issues in the HPOJ auto-configuration
	and in the Star Office/OpenOffice.org auto-configuration.

2002/07/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: use aliases for stage1 params to reduce kernel msg

2002/07/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated pot file

2002/07/29  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm: 
	  - don't display "To activate the mouse, MOVE YOUR WHEEL!" when not
	install
	  - don't display "Please test the mouse" either
	allow to not mess with X config auxmouse
	(that way mousedrake doesn't need to care about it)
	disallow big_help (when pressing F1) when testing mouse

	* install_any.pm (g_auto_install): also save chosen on_services (this is
	the only thing left to do to make it work :)

	* drakxtools.spec: remove "Requires: groff" (nobody know why it's there)
	(Pixel)

	* run_program.pm: fix rooted() when chrooted and saving the result in a
	perl variable

	* share/rpmsrate: xpcd is still there (deush)
	  - remove deprecated packages
	  - adapt some to their names

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fix typo

	* Xconfig/main.pm: restore xdm choice previous behaviour (auto_install)

	* Xconfig/resolution_and_depth.pm (configure_auto_install): really use
	resolution_wanted given in $o

	* fs.pm: fix mke2fs on loopback
	  - use $::prefix for reading/writing (it was missing for writing)
	  - use output_p so that /etc/samba directory is created if needed
	(fix bug reported by David Eastcott)

	* Xconfig/test.pm: try harder to have "xfs" running

	* partition_table.pm: cleanup

	* services.pm (ask_standalone_gtk, ask_install): only return the
	on_services (those
	functions used to return ($l, $on_services) which used in a scalar
	context
	returned $on_services)

	* standalone/mousedrake: 
	  - fix using deprecated Xconfig.pm
	  - document dam's hack for test mouse
	  - cleanup
	  - don't bother reading XFree mouse config
	(using keep_auxmouse_unchanged of mouse::write_conf)

	* Xconfig/default.pm: fix default config for mouse

	* my_gtk.pm: disallow big_help (when pressing F1) when testing mouse

	* printer.pm: make perl_checker happy

	* diskdrake/interactive.pm: nicer error message when "You can't create a
	new partition
	(since you reached the maximal number of primary partitions).
	First remove a primary partition and create an extended partition."
	fix diskdrake::interactive::Options() excepts a value from
	fs::mount_options_pack(), but fs::mount_options_pack() doesn't return
	any
	value (reported by Olivier Thauvin)

	* standalone/XFdrake: make perl_checker happy
	(ask_for_X_restart): make it work

	* bootloader.pm: try to allow /boot on vfat (it used to work)

	* network/smb.pm: 
	  - use $::prefix for reading/writing (it was missing for writing)
	  - use output_p so that /etc/samba directory is created if needed
	(fix bug reported by David Eastcott)

	* install_interactive.pm: fix partition wizard choice updating after
	calling diskdrake

	* install_steps_gtk.pm, install_steps_interactive.pm, install2.pm: ensure
	choosing install-or-upgrade can't be done twice
	(since it's badly handled and hard to handle nicely)

2002/07/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* standalone/drakxtv: read and wrote /etc/modules.conf

	* Makefile: 
	  - consolidate duplicated 'use (warn|strict...' into nuke_perl target
	  - thus enable to fix bug reported by gc (aka i only fixed localsrpm
	  nuke, not srpm: one)

	* drakxtools.spec: final changes batch
	  - pixel: don't set release to 14mdk when 13mdk hadn't be released ...
	  - list 13mdk changes
	replace trigger by format test for hw config file conversion

2002/07/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (configureX, configureXBefore, configureXAfter):
	greatly simplified using new Xconfig stuff

	* standalone/XFdrake: 
	  - adapt to new Xconfig modules
	  - try out the new "XFdrake resolution" and "XFdrake monitor" that'll
	get into DrakConf soon

	* Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm,
	Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm,
	Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm,
	Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules,
	will it be enough?? :)

	* any.pm (running_window_manager): return the pids found if wanted
	(ddcxinfos): ensure no probe is done when $::noauto

	* install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new
	Xconfig modules

	* install_any.pm (g_auto_install): no need to handle $o->{X} as a special
	case, it's already done by Xconfig::main::export_to_install_X

	* Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served
	well, you may now lie in peace

	* common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810'
	instead of a regexp

	* Xconfig/card.pm: make perl_checker happy
	rahh, don't commit my test code!
	14 new modules, will it be enough?? :)

	* share/list: CardsNames is not needed anymore

	* interactive.pm: fix "nicer error message when {val} is not set for
	ask_from & list" in case of a reference to a reference (ref is REF
	instead of SCALAR)

	* Xconfig/main.pm: fix displaying info about current configuration
	14 new modules, will it be enough?? :)

	* Xconfig/resolution_and_depth.pm: 
	  - make the gtk resolution chooser work
	  - dropped the differenciation between embedded or not
	14 new modules, will it be enough?? :)

	* mouse.pm (detect): return wacom inside $mouse
	(mouseconfig): reduce the number of "Use of undefined value"
	(set_xfree_conf): created

	* install2.pm: wacom is now inside $mouse

	* install_steps_interactive.pm (configureX): adapt to new Xconfig

2002/07/28  Pixel  <pixel@mandrakesoft.com>

	* Xconfig/main.pm: fix displaying info about current configuration
	14 new modules, will it be enough?? :)

	* Xconfig/resolution_and_depth.pm: 
	  - make the gtk resolution chooser work
	  - dropped the differenciation between embedded or not
	14 new modules, will it be enough?? :)

	* install_steps_gtk.pm, install_gtk.pm, standalone.pm: adapt to new
	Xconfig modules

	* install_any.pm (g_auto_install): no need to handle $o->{X} as a special
	case, it's already done by Xconfig::main::export_to_install_X

	* mouse.pm (detect): return wacom inside $mouse
	(mouseconfig): reduce the number of "Use of undefined value"
	(set_xfree_conf): created

	* install_steps.pm (configureX, configureXBefore, configureXAfter):
	greatly simplified using new Xconfig stuff

	* install2.pm: wacom is now inside $mouse

	* standalone/XFdrake: 
	  - adapt to new Xconfig modules
	  - try out the new "XFdrake resolution" and "XFdrake monitor" that'll
	get into DrakConf soon

	* Xconfig/xfree3.pm, Xconfig/various.pm, Xconfig/parse.pm,
	Xconfig/xfree.pm, Xconfig/test.pm, Xconfig/xfreeX.pm,
	Xconfig/proprietary.pm, Xconfig/xfree4.pm, Xconfig/monitor.pm,
	Xconfig/default.pm, Xconfig/screen.pm, Xconfig/FILES: 14 new modules,
	will it be enough?? :)

	* Xconfig.pm, Xconfigurator.pm, Xconfigurator_consts.pm: thou hast served
	well, you may now lie in peace

	* install_steps_interactive.pm (configureX): adapt to new Xconfig

	* any.pm (running_window_manager): return the pids found if wanted
	(ddcxinfos): ensure no probe is done when $::noauto

	* Xconfig/card.pm: make perl_checker happy
	rahh, don't commit my test code!
	14 new modules, will it be enough?? :)

	* common.pm (availableRamMB): use a precise constraint on 'Card:Intel 810'
	instead of a regexp

	* interactive.pm: fix "nicer error message when {val} is not set for
	ask_from & list" in case of a reference to a reference (ref is REF
	instead of SCALAR)

2002/07/28  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakTermServ: Check for/install terminal-server and friends.
	More intelligent error message when
	mkisofs fails.  Cleanup code for use strict. Fix crash when no backup
	dhcpd.conf.

	* standalone/drakbackup: Numerous GUI crash fixes, oddities. Install
	needed packages. Fix email, daemon modes.
	Add rsync, webdav, cd, tape capabilities. Consolidate net method setup
	screens.
	Add CD device capability query.

2002/07/27  alus

	* share/po/pl.po: Fixes. There're some entries concerning mdk 8.2 - they
	should be changed
	globally

2002/07/27  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (add_probeall): use "uniq" to have modules only once in
	ddebug.log (a "uniq"
	was already in modules.conf so it doesn't change the result)

	* detect_devices.pm: use add_probeall for scsi_hostadapter, not add_alias
	(may fix a bug reported by Jure Repinc)

2002/07/27  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Completed implementation of the support for
	HPOJ 0.9: Automatic photo card reader configuration, bugfixes.

2002/07/26  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/logdrake: 
	  - more consistency when back button hit in wizard mode
	  - back button at last stage.

	* standalone/drakbug: 
	  - add browser list in case BROWSER env var isn't set

2002/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/Makefile: fixed reference to rpmtools perl module.

2002/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/rescue-gui.c: 
	  - usage of attribute unused (has not been rebuilt since -W? ;p)
	  - since i polluted the newt-frontend with probing functions, i
	need to have probing functions (doing nothing) here :-((

2002/07/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* harddrake/ui.pm: changed _("") -> "" empty strings must not be
	translated

2002/07/26  Pixel  <pixel@mandrakesoft.com>

	* rescue/list: remove traceroute (c naze dixit gc)

	* share/gen_locales.sh, lang.pm: hy is now using UTF8 locales

	* any.pm, services.pm, install_steps.pm: use
	run_program::rooted_get_stdout instead of `chroot $prefix ...`

	* install_any.pm: use run_program::rooted_get_stdout

	* Xconfigurator.pm: cleanup launching qiv (using run_program)

	* bootloader.pm: 
	  - fix dying when mkinitrd doesn't create an initrd
	  - cleanup

	* run_program.pm (rooted_get_stdout): handle one line return using
	wantarray
	  - also give the ability to redirect to an array ref
	  - add rooted_get_stdout which is alike ``
	add 2 functionalities to run_program:
	  - run_program::run(prog, '>', 'STDOUT', ...)
	run_program::run(prog, '2>', 'STDERR, ...)
	  which will run with verbatim stdout or stderr
	  - run_program::run(prog, '>', \$s, ...)
	  run_program::run(prog, '2>', \$s, ...)
	  which will return the stdout (resp. stderr) of the program in $s

	* rescue/Makefile: ensure rescue is built and uploaded

2002/07/26  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/TODO: dadou said "no expert mode"

	* harddrake/ui.pm: 
	  - s/channel/Channel/
	  - bus_id is for usb devices too
	  - remove obsolete fields info and name
	  - add nbuttons, device, old_device descriptions

	* drakxtools.spec: 13mdk

2002/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/Makefile: fixed reference to rpmtools perl module.

2002/07/26  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm: First step of automatic HP multi-function device
	configuration with HPOJ 0.9.

	* detect_devices.pm: Added detection of trhe serial number of a USB
	printer (in preparation for HPOJ 0.9 support in printerdrake).

2002/07/25  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc
	<rickscafe.casablanca@gmx.net> you did
	all the work to resolve the pb)
	=> this fixes ide burner detection

2002/07/25  alus

	* share/po/pl.po: fix
	fix
	one entry more clearly :)

2002/07/25  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/logdrake: 
	  - don't display services that are not installed
	  - word wrap string correctly
	  - cleanup

2002/07/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added log.
	small code changes for upgrade.

	* tools/syncrpms: no more use rpmtools.pm.

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new logo (simplified
	for 9.0).

2002/07/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po, share/po/id.po, share/po/vi.po: updated po files

2002/07/25  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm: use a function icon_paths instead of @icon_paths
	=> this ensure that $ENV{SHARE_PATH} value (used in @icon_paths) is set
	independently of the loading order of the modules

	* install_steps_interactive.pm: fix loading ide-cd (big thanks to rcc
	<rickscafe.casablanca@gmx.net> you did
	all the work to resolve the pb)
	=> this fixes ide burner detection
	Help "perl -cw" not reporting any warning
	  - for mac free partition, use $freepart instead of $freepart_device,
	$freepart_size ...
	  - replace $timezone::ntp_servers by a function

	* bootloader.pm: let the bootloader::mkinitrd error be seen by the GUI

	* install_steps_newt.pm: please "perl -cw"

	* verify_c: adapt to stuff.xs.pl instead of stuff.xs.pm

	* partition_table.pm: add 0x35 partition table id meaning JFS (under OS/2)
	(thank to Mika Laitio)

	* fs.pm: noreturn is now exported, no need to
	MDK::Common::Various::noreturn()

	* common.pm: remove internal_error (which is now in MDK::Common)

	* partition_table/mac.pm, timezone.pm: Help "perl -cw" not reporting any
	warning
	  - for mac free partition, use $freepart instead of $freepart_device,
	$freepart_size ...
	  - replace $timezone::ntp_servers by a function

2002/07/25  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* drakxtools.spec: 12mdk
	final batch of changes
	11mdk

	* harddrake/TODO: still less things to do
	update

	* c/stuff.xs.pl: don't copy struct pciusb_entries on the stack

	* standalone/service_harddrake: merge timeout and cancel cases
	simplify:
	  - we don't need to set media_type, we don't use it
	  - mouse and mass storage media use the same key, let merge their code
	path

	* interactive/newt.pm: typo fix

	* Makefile.drakxtools: fix pixel "i do not need to test" fscking bug that
	broke drakxtools
	build :-)

	* harddrake/ui.pm: remove all gtk's "no callback/signal to disconnect"
	warnings
	add a fields data structure:
	  - put together field translation and field description
	  - this enable to get rid of %reverse_fields usage & creation
	  - this ensure all field names & translations are marked translatables
	for gettext
	  - move $wait declaration around its usage and explicit its destruction
	  - remove usb debugging message needed to trace the null description
	  bug i fixed in ldetect
	  - simplify the device fields rendering "because of" the above
	  - simplify the help window creation/display/destruction (only one
	  statement left)
	  - explicitely call interactive->exit
	handle both old device name and new devfs name

	* share/po/fr.po: update french translation

	* harddrake/data.pm: only do one probeall here (there's still many in
	detect_devices,
	probing caching should go there)

	* Makefile: use spec_test rather than test

2002/07/24  alus

	* share/po/pl.po: fixes
	the last untranslated entry

2002/07/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/cdrom.c, mdk-stage1/disk.c, mdk-stage1/tools.c,
	mdk-stage1/stage1.h, mdk-stage1/tools.h, mdk-stage1/frontend.h,
	mdk-stage1/probing.h, mdk-stage1/stdio-frontend.c,
	mdk-stage1/newt-frontend.c, mdk-stage1/probing.c: enhance (complicate?
	;p) device detection so that scsi and usb
	detection are done only when no ide cdrom with mandrake install
	is detected (speed up), have usb keyboard modules installed
	before any interactive question, honour "noauto" (skip usb
	detection and insmod'ing)

2002/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/cs.po,
	share/po/bg.po, share/po/lv.po, share/po/hu.po: updated po files

2002/07/24  Pixel  <pixel@mandrakesoft.com>

	* Makefile, Makefile.drakxtools: add PMS_DIRS in Makefile.config and use
	it everywhere
	(cleaning some ugly stuff in Makefile.drakxtools while doing so)
	=> now adding a new directory only need to be done at one place

	* Xconfig/xfree3.pm, Xconfig/xfreeX.pm, mouse.pm, Xconfig/xfree4.pm,
	Xconfig/parse.pm: new XFree handling library
	  - only keyboard and mice functions are done, but adding the others is
	quite easy
	  - so for now only used in mousedrake
	  - but keyboarddrake and (of course) XFdrake will come

	* Makefile.config: add Xconfig
	add PMS_DIRS in Makefile.config and use it everywhere
	(cleaning some ugly stuff in Makefile.drakxtools while doing so)
	=> now adding a new directory only need to be done at one place

	* standalone/keyboarddrake: use Xconfig::xfree to set the XkbLayout
	(better should&will come)

	* c/stuff.xs.pl, c/Makefile, c/stuff.xs.pm: rename stuff.xs.pm to
	stuff.xs.pl (since it's a prog, not a module)
	(it helps for not having stuff.xs.pm in PMS)

	* Xconfig/xfree.pm (get_both): fix returning one element (eg:
	get_keyboard)
	new XFree handling library
	  - only keyboard and mice functions are done, but adding the others is
	quite easy
	  - so for now only used in mousedrake
	  - but keyboarddrake and (of course) XFdrake will come

	* log.pm: when testing, log on STDERR

2002/07/24  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/data.pm: don't account scanners as unknown devices

	* harddrake/ui.pm: scanners support:
	  - split scannerdrake:val into vendor and description
	  - don't display bogus "val:%HASH"

2002/07/23  alus

	* share/po/pl.po: fuzzy cheched

2002/07/23  Christian Belisle  <cbelisle@mandrakesoft.com>

	* security.pm: removal

2002/07/23  Daouda Lo  <daouda@mandrakesoft.com>

	* security/msec.pm: 
	  - fix typo: s/%%options;/%%options/

2002/07/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: manage correctly unselectPackage and use perl-URPM >= 0.50.

2002/07/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/probing.c: s/usb/moreprofessional/ thanks to vdanen

2002/07/23  Pixel  <pixel@mandrakesoft.com>

	* share/po/help-eu.pot: rebuild after replacing \" by "

	* any.pm, interactive.pm: use fuzzy_pidofs (to detect if kwin is running)

	* detect_devices.pm: handle computers with no /proc/scsi/scsi

	* .cvsignore, share/modparm.lst, Makefile: modparm.lst is not used anymore
	(modinfo -p)

2002/07/23  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: further translations update
	update french translation

	* drakxtools.spec: 10mdk changes
	final changes batch
	9mdk
	g Move 2: partition table: hierarchy
	  - Big Move 1: interactive::* hierarchy

	* partition_table_dos.pm, partition_table/dos.pm, partition_table_mac.pm,
	partition_table/sun.pm, partition_table/gpt.pm, partition_table_raw.pm,
	partition_table_lvm_PV.pm, partition_table_empty.pm, standalone.pm,
	partition_table_sun.pm, partition_table_bsd.pm, install_interactive.pm,
	partition_table/raw.pm, partition_table.pm, any.pm,
	partition_table/mac.pm, partition_table/bsd.pm, bootloader.pm,
	diskdrake/hd_gtk.pm, partition_table/empty.pm, fsedit.pm,
	partition_table/lvm_PV.pm, partition_table_gpt.pm: g Move 2: partition
	table: hierarchy

	* Makefile.config, install_steps.pm, install_steps_interactive.pm,
	diskdrake/interactive.pm, Makefile.drakxtools, install_any.pm: g Move 2:
	partition table: hierarchy
	  - Big Move 1: interactive::* hierarchy

	* harddrake/ui.pm: remove dead code
	remove dead args
	about and help windows: only show "OK" button, cancel one has no
	purpose here

	* detect_devices.pm: remove '-' before description for IBM eide hard disks
	g Move 2: partition table: hierarchy

	* standalone/service_harddrake: faster service startup

	* interactive_newt.pm, interactive.pm, standalone/drakautoinst,
	install_steps_stdio.pm, standalone/tinyfirewall, Xconfigurator.pm,
	standalone/drakboot, standalone/diskdrake, standalone/mousedrake,
	install_steps_newt.pm, printerdrake.pm, interactive_gtk.pm,
	install_steps_gtk.pm, interactive/http.pm, interactive/stdio.pm,
	interactive/newt.pm, services.pm, standalone/drakconnect,
	standalone/drakgw, interactive/gtk.pm, interactive_http.pm,
	interactive_stdio.pm, standalone/drakxtv: 
	  - Big Move 1: interactive::* hierarchy

	* Makefile: check make got correct tag from spec file
	fast build: new target (fastsrpm = cvstag localsrpm)
	g Move 2: partition table: hierarchy
	  - Big Move 1: interactive::* hierarchy

	* harddrake/data.pm: s/drakconnet/drakconnect

	* harddrake/TODO: update

2002/07/22  Pixel  <pixel@mandrakesoft.com>

	* any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto,
	hardwire no probing in detect_devices::probeall to ensure no probing is
	never done

	* share/po/help-fr.pot, share/po/help-de.pot, share/po/help-eu.pot,
	help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-es.pot,
	share/po/help-it.pot: 
	  - update help.pm based on the xml manual
	  - this fixes entities sticked together with no space in between
	  - this also implies a few bad line-wrapping changes,
	    but it needs to be done to have a clean state
	    (we don't have one since 8.2beta where i updated things by hand)
	  - put help-*.pot in CVS so that the files based on the xml manual can
	be updated
	  independently from DrakX.pot & .po's

	* Newt/Makefile, resize_fat/Makefile, c/Makefile: ensure things build as
	they should when perl is upgraded on compilation box
	(using a nice scheme: make || make)

2002/07/22  Till Kamppeter  <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Adapted printerdrake to CUPS 1.1.15 and
	Perl 5.8.0 (for Foomatic).
	Let network also be started during installation when LPRng or PDQ is the
	spooler, so that the user can install queues to remote printers.

2002/07/22  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/tools.pm: hide password in adsl configuration

2002/07/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: try avoiding infinite loop.

2002/07/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/it.po, share/po/nl.po, share/po/eu.po, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/el.po, share/po/bg.po,
	share/po/lv.po, share/po/hu.po: updated pot file

	* share/po/cs.po: updated Czech file
	updated pot file

2002/07/22  Pixel  <pixel@mandrakesoft.com>

	* c/Makefile, Newt/Makefile, resize_fat/Makefile: ensure things build as
	they should when perl is upgraded on compilation box
	(using a nice scheme: make || make)

	* any.pm, mouse.pm, install2.pm, detect_devices.pm: when $::noauto,
	hardwire no probing in detect_devices::probeall to ensure no probing is
	never done

	* help.pm, share/po/.cvsignore, share/po/Makefile, share/po/help-de.pot,
	share/po/help-fr.pot, share/po/help-eu.pot, share/po/help-es.pot,
	share/po/help-it.pot: 
	  - update help.pm based on the xml manual
	  - this fixes entities sticked together with no space in between
	  - this also implies a few bad line-wrapping changes,
	    but it needs to be done to have a clean state
	    (we don't have one since 8.2beta where i updated things by hand)
	  - put help-*.pot in CVS so that the files based on the xml manual can
	be updated
	  independently from DrakX.pot & .po's

	* share/po/help_xml2pm.pl: 
	  - use new PerlIO instead of iconv
	  - transliterate by hand &ndash and &eacute
	  - move "use utf8" at top
	  - fix the spaces between entities
	(eg: &company-microsoft; &os-windows; must not be MicrosoftWindows)

2002/07/21  Pixel  <pixel@mandrakesoft.com>

	* drakxtools.spec: new snapshot

	* Xconfigurator.pm: fix multi-head auto-choosing in auto install

	* install_any.pm: workaround "traverse_tag" pb in Resolve.pm
	resolve_requested (is it ok??)

2002/07/21  Pixel  <pixel@mandrakesoft.com>

	* drakxtools.spec: new snapshot

	* install_any.pm: workaround "traverse_tag" pb in Resolve.pm
	resolve_requested (is it ok??)

2002/07/21  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: Load "extmod" is a must! (for things like shape and
	dga)

	* Xconfig.pm: fix typo

2002/07/21  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: Load "extmod" is a must! (for things like shape and
	dga)

	* Xconfig.pm: fix typo

	* share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build
	in gen_locales.pl

	* share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks
	using the new::during_install__lang2charset
	  -> this enables doing the same during install when using ramdisk
	=> no need to have a locale.cz2 anymore
	  (this is now possible since the number of special cases is lower than
	before)

	* lang.pm: 
	  - remove utf_xxx charsets, adding a flag UTF-8 instead
	  - add during_install__lang2charset
	  - when using ramdisk, no locale.cz2 anymore:
	there are 3 main charsets containing everything for all locales, except
	LC_CTYPE
	    by default, there is UTF-8.
	    when asked for GB2312 or BIG5, removing the other main charsets
	  - cleanup comments (use #- instead of #)
	  - various cleanup

	* tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main
	charset /usr/share/locale/UTF-8

2002/07/21  Pixel  <pixel@mandrakesoft.com>

	* share/locales-skeleton.tar.bz2: usr/share/locale skeleton is now build
	in gen_locales.pl

	* share/gen_locales.pl, share/gen_locales.sh: build per languages symlinks
	using the new::during_install__lang2charset
	  -> this enables doing the same during install when using ramdisk
	=> no need to have a locale.cz2 anymore
	  (this is now possible since the number of special cases is lower than
	before)

	* lang.pm: 
	  - remove utf_xxx charsets, adding a flag UTF-8 instead
	  - add during_install__lang2charset
	  - when using ramdisk, no locale.cz2 anymore:
	there are 3 main charsets containing everything for all locales, except
	LC_CTYPE
	    by default, there is UTF-8.
	    when asked for GB2312 or BIG5, removing the other main charsets
	  - cleanup comments (use #- instead of #)
	  - various cleanup

	* tools/make_mdkinst_stage2: no more locale.cz2, just keeping the main
	charset /usr/share/locale/UTF-8

2002/07/20  Daouda Lo  <daouda@mandrakesoft.com>

	* standalone/drakbug: 
	  - complete app list

2002/07/20  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator_consts.pm: shorter and nicer XF86Config's

	* mouse.pm: devfssymlinkf doesn't have any return value, so don't check it

	* Xconfig.pm (getinfoFromXF86Config): move here setting prefer_xf3 based
	on current choice on system
	shorter and nicer XF86Config's

	* install_gtk.pm: 
	  - rename updateCardAccordingName into add_to_card__using_Cards
	  - rename cardConfigurationAuto into probe_cards
	  - cleanup the simple XF86Config used during install

	* install_steps.pm: call config_dvd with $have_devfsd

	* install_steps_gtk.pm: 
	  - rename updateCardAccordingName into add_to_card__using_Cards
	  - rename cardConfigurationAuto into probe_cards

	* any.pm: try very hard to make rdvd work:
	  - if not using devfs, it worked so keeping things unchanged
	  - if using devfs, using the new dynamic rawdevice.script script to
	bind a
	rawdevice on demand
	pb: can't have both a devfs and a non-devfs config,
	    the /etc/sysconfig/rawdevices solution gives errors with devfs
	    (since the dvd is not REGISTERed yet)
	please perl_checker
	fix typo
	(devfssymlinkf): use devfs names for devfs/conf.d/xxx.conf, but not for
	the
	symlink in /dev (which is used when devfs is not)
	devfssymlinkf doesn't have any return value, so don't check it

	* Xconfigurator.pm: 
	  - $in and $do_pkgs are no more global
	=> it's now easier to keep track of interactive vs non-interactive
	functions
	  - rename updateCardAccordingName into add_to_card__using_Cards
	  - rename cardConfigurationAuto into probe_cards
	  - and a few other function renamings
	shorter and nicer XF86Config's

2002/07/19  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: 
	  - reorganize monitor tree
	  - merge XF3 & XF4 server/module choosing
	  - replace {eide} by {EISA_ID} (=> {monitor} cleanup)
	  - ensure a few "Cancel" are more better handled
	  - ensure the default monitor in the monitor tree is the last chosen
	one

	* Xconfigurator_consts.pm: 
	  - fix good_default_monitor (must not be 1600x1200!)
	  - add r128 & radeon in XF4 drivers list

	* interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used
	place
	(useful when debugging)

	* Xconfig.pm: read monitor's VendorName & ModelName

2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/adsl.pm: 
	  - check if speedtouch_mgmt exist before installing it

2002/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: revert changes so that DrakX work again.

	* install_any.pm: select default_packages directly during setPackages.

	* install_steps_interactive.pm: make sure unselectMostPackages is called
	(so that changes in default_packages
	are taken into account... but is may be any changes here ?).

2002/07/19  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator_consts.pm: 
	  - fix good_default_monitor (must not be 1600x1200!)
	  - add r128 & radeon in XF4 drivers list
	fix default_monitors to adapt new MonitorsDB

	* mouse.pm (devfssymlinkf): use devfs_device instead of device when
	available

	* partition_table.pm: handling devfs names for cdrom/hds on ide/scsi
	(needs testing)

	* any.pm (devfssymlinkf): try devices::to_devfs when devfs_device is not
	provided
	(devfssymlinkf): use devfs_device instead of device when available

	* detect_devices.pm: help perl_checker
	handling devfs names for cdrom/hds on ide/scsi (needs testing)

	* devices.pm: add functions to_devfs and from_devfs. These only work for
	devices entries
	which can go devfs -> normal and normal -> devfs

	* interactive_gtk.pm: reduce "Use of uninitialized value" in a heavy used
	place
	(useful when debugging)

	* Xconfig.pm: read monitor's VendorName & ModelName
	(readCardsDB): add handling BAD_FB_RESTORE & BAD_FB_RESTORE_XF3

	* Xconfigurator.pm: 
	  - reorganize monitor tree
	  - merge XF3 & XF4 server/module choosing
	  - replace {eide} by {EISA_ID} (=> {monitor} cleanup)
	  - ensure a few "Cancel" are more better handled
	  - ensure the default monitor in the monitor tree is the last chosen
	one
	partly cleanup monitor re-configuration (work in progress)

2002/07/19  Christian Belisle  <cbelisle@mandrakesoft.com>

	* any.pm: 
	  - remove any msec related functions
	  - remove 'use security::msec'

2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/adsl.pm: 
	  - check if speedtouch_mgmt exist before installing it

2002/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: revert changes so that DrakX work again.

	* install_any.pm: select default_packages directly during setPackages.
	fix typo on what_provides (for pitchounette :-)).
	added what_provides.

	* standalone.pm: fix typo on last commit.
	added what_provides.

	* install_steps_interactive.pm: make sure unselectMostPackages is called
	(so that changes in default_packages
	are taken into account... but is may be any changes here ?).

2002/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt.po: updated Portuguese file

2002/07/19  Pixel  <pixel@mandrakesoft.com>

	* standalone/XFdrake: rename $i in $X (to have the same as
	Xconfigurator.pm)

	* interactive.pm: nicer error message when {val} is not set for ask_from &
	list

	* Xconfigurator.pm: partly cleanup monitor re-configuration (work in
	progress)
	  - don't write XF86Config when no {card}{server}
	  - don't write XF86Config-4 when no {card}{driver}
	  - workaround mixing values from existing config and
	cardConfigurationAuto()
	  - fix asking VideoRam
	  - fix device0 in XF86Config
	  - use "device1", "device2"... for "Device" Identifier
	  - restore having a nice VendorName + BoardName
	(since Identifier is not very useful)
	  - get {card}{Chipset} from existing XF86Config
	  - use $::prefix
	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
	  - drop {card}{flags}, the few flags are moved directly to {card}
	  - force_xf4 is now a global in Xconfigurator
	  - create new functions for better modularity: multi_head_config,
	xfree_and_glx_choices, xfree_and_glx_choose
	  - for ppc, allow choosing DRI or not
	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
	wether
	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
	are only flags allowing or not DRI/UTAH.
	  - {card}{use_xf4} is dropped. New function using_xf4 has this
	functionality. The flags are now:
	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
	!{server}
	  - {card}{description} contains what used to be {card}{identifier}
	  - rename {card}{type} to {card}{card_name}
	  - drop {monitor}{type}

	* install_steps.pm: don't pass the prefix parameter, not needed/wanted
	anymore

	* Xconfigurator_consts.pm: fix default_monitors to adapt new MonitorsDB

	* Xconfig.pm (readCardsDB): add handling BAD_FB_RESTORE &
	BAD_FB_RESTORE_XF3
	  - use "device1", "device2"... for "Device" Identifier
	  - restore having a nice VendorName + BoardName
	(since Identifier is not very useful)
	  - get {card}{Chipset} from existing XF86Config
	  - use $::prefix
	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
	  - drop {card}{flags}, the few flags are moved directly to {card}
	  - force_xf4 is now a global in Xconfigurator
	  - create new functions for better modularity: multi_head_config,
	xfree_and_glx_choices, xfree_and_glx_choose
	  - for ppc, allow choosing DRI or not
	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
	wether
	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
	are only flags allowing or not DRI/UTAH.
	  - {card}{use_xf4} is dropped. New function using_xf4 has this
	functionality. The flags are now:
	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
	!{server}
	  - {card}{description} contains what used to be {card}{identifier}
	  - rename {card}{type} to {card}{card_name}
	  - drop {monitor}{type}

2002/07/19  Christian Belisle  <cbelisle@mandrakesoft.com>

	* any.pm: 
	  - remove any msec related functions
	  - remove 'use security::msec'

2002/07/19  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* standalone/drakconnect: 
	  - any::setup_thiskind_backend changed in any::load_category_no_message

2002/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt.po: updated Portuguese file

2002/07/19  Pixel  <pixel@mandrakesoft.com>

	* standalone/XFdrake: rename $i in $X (to have the same as
	Xconfigurator.pm)

	* Xconfigurator.pm: 
	  - don't write XF86Config when no {card}{server}
	  - don't write XF86Config-4 when no {card}{driver}
	  - workaround mixing values from existing config and
	cardConfigurationAuto()
	  - fix asking VideoRam
	  - fix device0 in XF86Config
	  - use "device1", "device2"... for "Device" Identifier
	  - restore having a nice VendorName + BoardName
	(since Identifier is not very useful)
	  - get {card}{Chipset} from existing XF86Config
	  - use $::prefix
	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
	  - drop {card}{flags}, the few flags are moved directly to {card}
	  - force_xf4 is now a global in Xconfigurator
	  - create new functions for better modularity: multi_head_config,
	xfree_and_glx_choices, xfree_and_glx_choose
	  - for ppc, allow choosing DRI or not
	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
	wether
	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
	are only flags allowing or not DRI/UTAH.
	  - {card}{use_xf4} is dropped. New function using_xf4 has this
	functionality. The flags are now:
	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
	!{server}
	  - {card}{description} contains what used to be {card}{identifier}
	  - rename {card}{type} to {card}{card_name}
	  - drop {monitor}{type}

	* interactive.pm: nicer error message when {val} is not set for ask_from &
	list

	* Xconfig.pm: 
	  - use "device1", "device2"... for "Device" Identifier
	  - restore having a nice VendorName + BoardName
	(since Identifier is not very useful)
	  - get {card}{Chipset} from existing XF86Config
	  - use $::prefix
	  - drop obsolete stuff: Ramdac, Dacspeed, Clockchip
	  - drop {card}{flags}, the few flags are moved directly to {card}
	  - force_xf4 is now a global in Xconfigurator
	  - create new functions for better modularity: multi_head_config,
	xfree_and_glx_choices, xfree_and_glx_choose
	  - for ppc, allow choosing DRI or not
	  - need flag {card}{use_DRI_GLX} and {card}{use_UTAH_GLX} deciding
	wether
	to use DRI_GLX or UTAH_GLX. That way, {card}{DRI_GLX}, {card}{UTAH_GLX}
	are only flags allowing or not DRI/UTAH.
	  - {card}{use_xf4} is dropped. New function using_xf4 has this
	functionality. The flags are now:
	  - using XF4 if {driver} && !{prefer_xf3} otherwise using XF3
	  - error if $force_xf4 && !{driver} || !{driver} && !{server}
	  - internal error if $force_xf4 && {prefer_xf3} || {prefer_xf3} &&
	!{server}
	  - {card}{description} contains what used to be {card}{identifier}
	  - rename {card}{type} to {card}{card_name}
	  - drop {monitor}{type}

	* install_steps.pm: don't pass the prefix parameter, not needed/wanted
	anymore

2002/07/18  Christian Belisle  <cbelisle@mandrakesoft.com>

	* standalone/draksec: create the main() function in security.pm

	* security.pm: Re-Addition: will contain the security related (but not
	related to any apps)
	funtioncs and the draksec interface.
	removing

	* security/msec.pm: 
	  - add prefix var in file names
	  - remove useless expert_mode var
	  - add get_options(): will be used to get various options from msec
	move the msec related functions from any.pm to msec.pm. create
	sec_options

2002/07/18  Damien Chaumette  <dchaumette@mandrakesoft.com>

	* network/netconnect.pm: . draknet renamed in drakconnect

2002/07/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixes allowNVIDIA_rpms against perl-URPM.
	really fixes it.
	fixes error if package is not found (regression fixed).

	* pkgs.pm: removed all the commented out code obsoleted.
	fix speed improvement for computeGroupSize by computing closure directly
	(in
	order to have an approximative size, not the real one).
	add back change CD support.

	* standalone/XFdrake: fixes with new urpm library of urpmi.

2002/07/18  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: 
	  - set $::prefix
	  - drop $o->{root} (was "/tmp/root-perl-install" when testing but
	completly unused)

	* standalone/XFdrake, install_steps_interactive.pm: don't pass the prefix
	parameter, not needed/wanted anymore

	* Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: 
	  - %standard_monitors are now in Cards+, dropping them
	  - multi head support generalized, now based on Cards+ MULTI_HEAD
	  - fix some ModeLines being written twice in XF86Config
	  - remove setting DefaultFbBpp to 32
	(since it is the default in all my tests)

	* common.pm, install_any.pm: use $::prefix instead of $::o->{prefix}

2002/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm, install_steps_interactive.pm: add support/option for
	Windows(tm) authentication via winbind

2002/07/18  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* drakxtools.spec: 7mdk changes
	6mdk final changes

	* harddrake/bttv.pm: useless standalone dependancy for pixel fscking
	checker

	* Makefile: faster startup: remove use (diagnostics|vars|strict) in srpm
	target as
	in local target (dams fsck)

	* harddrake/TODO: update

	* harddrake/data.pm: s/draknet/drakconnect/
	  - bump version number
	  - move scsi & ata controllers, tv-audio, dvd, burners, ... in their
	own "non configurable" sections

2002/07/18  warly

	* share/logo-mandrake.png: install logo for 9.0 beta 1

2002/07/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fix speed improvement for computeGroupSize by computing closure
	directly (in
	order to have an approximative size, not the real one).
	add back change CD support.

2002/07/18  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm, Xconfigurator_consts.pm, Xconfig.pm: 
	  - %standard_monitors are now in Cards+, dropping them
	  - multi head support generalized, now based on Cards+ MULTI_HEAD
	  - fix some ModeLines being written twice in XF86Config
	  - remove setting DefaultFbBpp to 32
	(since it is the default in all my tests)

2002/07/17  alus

	* share/po/pl.po: some more fixes
	some little changes

2002/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: added missing use pkgs.

2002/07/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* pkgs.pm: spell right harddrake (two 'd') in @preferred

	* tools/cvslog2changelog.pl: add daouda chaumette cbelisle

2002/07/17  Pixel  <pixel@mandrakesoft.com>

	* install_gtk.pm: normalize Modeline to ModeLine

	* common.pm: add function "internal_error" (a specialized "die")

	* drakxtools.spec: the new XFdrake needs latest ldetect-lst

	* Makefile (test_pms): exclude urpm from uses

	* printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected
	by new perl_checker)
	remove "$_ =~ " (as detected by new perl_checker)

	* any.pm: move the "if !$::testing" for not modifying inittab in function
	runlevel()
	(was in install_steps.pm)

	* commands.pm: remove "$_ =~ " (as detected by new perl_checker)

	* Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm,
	standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework
	  - use $X instead of $o (to avoid name conflict with DrakX's $o)
	  - {flag}{noclockprobe} unused, dropping it
	  - rename {memory} into "VideoRam"
	  - rename {ramdac} into {Ramdac}
	  - rename {chipset} into {Chipset}
	  - rename {clockchip} into {Clockchip}
	  - rename {keyboard}{xkb_model} into {keyboard}{XkbModel}
	  - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout}
	  - drop {mouse}{chordmiddle} (obsolete)
	  - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config)
	  - &testConfig is unused, removing it
	  - as a concequence, {clocklines} is never set, dropping it
	  - when UNSUPPORTED remove {driver}, instead of setting
	{flag}{unsupported}
	  - Cards+ now only provide {Chipset} for cards needing it
	  => {flag}{needChipset} not needed anymore
	  - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM)
	  (hoping it will work: since the regexp was broken, it was never done.
	   (it was applied on the module field of pcitable, instead of the
	description))
	  - dropped modelines_text_Trident_TG_96xx case (it has never been used)
	  - rename %xkb_options into %XkbOptions
	  - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the
	value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - very_bad_card and bad_card are now the same, the value now comes
	from
	  Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3)
	  - drop unused @accelservers
	  - remove $modelines_text_apple, use $modelines_text_ext instead
	  - don't use a <Section "Modes"> together with <UseModes "Mac Modes">,
	put
	  directly modelines in Section "Monitor"
	  (why should ppc behave differently than others!?)
	  - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and
	  "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos)
	  - drop ModeLine "640x480 @ 72 Hz"
	  (it conflicts, and anyway, it has no real use nowadays :)
	  - drop comments about HorizSync, VertRefresh and ModeLine's from
	  XF86Config
	  - drop many unneeded stuff from XF86Config:
	  AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes,
	  XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl
	  - drop section comments from XF86Config
	  - drop XF86_Mono configuration
	  (it doesn't work anyway, seems like it needs a special ModeLine?)
	  - drop 320x200 with XF86_SVGA (who can use this!?)
	  - do not write Screen section "accel" if the server configured is not
	an
	  accel one
	  - drop the "Generic VGA" Device section for XF4
	  (this device is unused)
	  - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor},
	{card}{model},
	  {card}{board} (only description strings, not useful for running the
	server)
	  - use x_res instead of wres for things like 1024 in 1024x768

2002/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: added missing use pkgs.

2002/07/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* pkgs.pm: spell right harddrake (two 'd') in @preferred

2002/07/17  Pixel  <pixel@mandrakesoft.com>

	* install_gtk.pm: normalize Modeline to ModeLine

	* common.pm: add function "internal_error" (a specialized "die")

	* drakxtools.spec: the new XFdrake needs latest ldetect-lst

	* Makefile (test_pms): exclude urpm from uses

	* printer.pm, printerdrake.pm: use {XXX} instead of {'XXX'} (as detected
	by new perl_checker)
	remove "$_ =~ " (as detected by new perl_checker)

	* any.pm: move the "if !$::testing" for not modifying inittab in function
	runlevel()
	(was in install_steps.pm)

	* commands.pm: remove "$_ =~ " (as detected by new perl_checker)

	* Xconfigurator.pm, Xconfigurator_consts.pm, install_steps.pm,
	standalone/XFdrake, Xconfig.pm: Big Xconfigurator.pm cleanup/rework
	  - use $X instead of $o (to avoid name conflict with DrakX's $o)
	  - {flag}{noclockprobe} unused, dropping it
	  - rename {memory} into "VideoRam"
	  - rename {ramdac} into {Ramdac}
	  - rename {chipset} into {Chipset}
	  - rename {clockchip} into {Clockchip}
	  - rename {keyboard}{xkb_model} into {keyboard}{XkbModel}
	  - rename {keyboard}{xkb_keymap} into {keyboard}{XkbLayout}
	  - drop {mouse}{chordmiddle} (obsolete)
	  - drop {mouse}{cleardtrrts} (obsolete, was not written to XF4 config)
	  - &testConfig is unused, removing it
	  - as a concequence, {clocklines} is never set, dropping it
	  - when UNSUPPORTED remove {driver}, instead of setting
	{flag}{unsupported}
	  - Cards+ now only provide {Chipset} for cards needing it
	  => {flag}{needChipset} not needed anymore
	  - moved setting needVideoRam in Cards+ (via NEEDVIDEORAM)
	  (hoping it will work: since the regexp was broken, it was never done.
	   (it was applied on the module field of pcitable, instead of the
	description))
	  - dropped modelines_text_Trident_TG_96xx case (it has never been used)
	  - rename %xkb_options into %XkbOptions
	  - rename {DRI_glx} into {DRI_GLX}, the value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - rename {Utah_glx} into {UTAH_GLX}, the value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - rename {Utah_glx_EXPERIMENTAL} into {UTAH_GLX_EXPERIMENTAL}, the
	value now comes from Cards+
	  instead of regexp'ing {identifier}
	  - very_bad_card and bad_card are now the same, the value now comes
	from
	  Cards+ (BAD_FB_RESTORE & BAD_FB_RESTORE_XF3)
	  - drop unused @accelservers
	  - remove $modelines_text_apple, use $modelines_text_ext instead
	  - don't use a <Section "Modes"> together with <UseModes "Mac Modes">,
	put
	  directly modelines in Section "Monitor"
	  (why should ppc behave differently than others!?)
	  - replace (conflicting) ModeLines "1280x1024 @ 74 Hz" and
	  "1280x1024 @ 76 Hz" with "1280x1024 @ 75 Hz" (from ddcxinfos)
	  - drop ModeLine "640x480 @ 72 Hz"
	  (it conflicts, and anyway, it has no real use nowadays :)
	  - drop comments about HorizSync, VertRefresh and ModeLine's from
	  XF86Config
	  - drop many unneeded stuff from XF86Config:
	  AutoRepeat, Xqueue, Xleds, NoTrapSignals, XkbTypes, XkbKeycodes,
	  XkbCompat, XkbRules, LeftAlt/RightAlt/ScrollLock/RightCtl
	  - drop section comments from XF86Config
	  - drop XF86_Mono configuration
	  (it doesn't work anyway, seems like it needs a special ModeLine?)
	  - drop 320x200 with XF86_SVGA (who can use this!?)
	  - do not write Screen section "accel" if the server configured is not
	an
	  accel one
	  - drop the "Generic VGA" Device section for XF4
	  (this device is unused)
	  - drop {monitor}{vendor}, {monitor}{model}, {card}{vendor},
	{card}{model},
	  {card}{board} (only description strings, not useful for running the
	server)
	  - use x_res instead of wres for things like 1024 in 1024x768

2002/07/16  alus

	* share/po/pl.po: unused string removed

2002/07/16  cbelisle

	* standalone/draksec: re-write the part setting the security admin

	* security.pm: draksec - initial commit. preparing for the advanced
	section.

	* any.pm: draksec:
	  - rewrite the function to set the security admin
	  - remove ugly buttons, 'advanced' button will come later

2002/07/16  dchaumette

	* standalone/drakbug, standalone/interactive_http/authorised_progs,
	standalone/drakxconf: o finish moving draknet to drakconnect in
	standalone

2002/07/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: update with newer perl-URPM.
	added log (finding packages to upgrade or computing installed flag)

	* install_steps.pm: removed useless package selection cleaning.

	* install_steps_gtk.pm: code cleanup.

	* install_steps_interactive.pm: improve a little.
	fixed missing upgrade.
	added wait message when finding packages to upgrade.

	* install2.pm: fixed reference to step 'selectPackagesToUpgrade'.

	* install_any.pm: fixed die when choosePackages step is redone.

	* crypto.pm: allow upgrade (if any) by using version at 8.2.

2002/07/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* any.pm: small english fix thx to vdanen

	* share/po/id.po, share/po/sk.po, share/po/ru.po, share/po/gl.po,
	share/po/pt_BR.po, share/po/br.po, share/po/th.po, share/po/sl.po,
	share/po/no.po, share/po/et.po, share/po/ja.po, share/po/hr.po,
	share/po/tr.po, share/po/mt.po, share/po/ga.po, share/po/be.po,
	share/po/uk.po, share/po/ko.po, share/po/DrakX.pot, share/po/sv.po,
	share/po/sr.po, share/po/pl.po, share/po/fi.po, share/po/lt.po,
	share/po/sp.po, share/po/cy.po, share/po/ca.po, share/po/da.po,
	share/po/ar.po, share/po/bs.po, share/po/ro.po, share/po/wa.po,
	share/po/is.po, share/po/af.po, share/po/az.po, share/po/zh_TW.po,
	share/po/zh_CN.po, share/po/pt.po, share/po/vi.po, share/po/fr.po,
	share/po/nl.po, share/po/it.po, share/po/eu.po, share/po/es.po,
	share/po/de.po, share/po/eo.po, share/po/lv.po, share/po/el.po,
	share/po/cs.po, share/po/bg.po, share/po/hu.po: reflect typo fix in
	any.pm in the po's so that the translation are not broken

	* mdk-stage1/stage1.c: extend a bit fatal error when trying to execute
	/usr/bin/runinstall2 and it's not possible

2002/07/16  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakTermServ: fix "$" in translated string

	* Makefile: don't display etags command (too long, not nice)

2002/07/15  daouda

	* standalone/drakbug: 
	  - isStandalone is set in standalone.pm, removed

	* standalone/draksec: 
	  - isStandalone is set in standalone.pm, removed.
	  - set isStandalone to 1 to center wait messages

2002/07/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: synced.

	* install_any.pm: synced with other module updated.

	* c/stuff.xs.pm: cleaned no more used method.

	* pkgs.pm: made upgrade almost work again (need testing and
	remove/deselect still doesn't
	work properly).

	* install_steps.pm: code re-organisation (a little).

	* install_steps_gtk.pm: fixed flag usage (still check selected package to
	upgrade but already selected
	are correctly shown).

2002/07/15  Pixel  <pixel@mandrakesoft.com>

	* ChangeLog: revert titi's error

2002/07/11  Pixel  <pixel@mandrakesoft.com>

	* rescue/list.i386: switch to vendor_perl

2002/07/10  daouda

	* standalone/drakbug: 
	  - code update
	  - use local http server for test.

2002/07/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, install_steps_gtk.pm, crypto.pm, share/list, pkgs.pm,
	install_any.pm, install2.pm, install_steps_interactive.pm: use perl-URPM
	instead of rpmtools.

	* tools/Makefile: use vendor_perl instead of site_perl (check of
	rpmtools.pm and packdrake.pm presence).

2002/07/10  Pixel  <pixel@mandrakesoft.com>

	* tools/Makefile: nicer use of vendor_perl instead of site_perl (check of
	rpmtools.pm and
	packdrake.pm presence) ... i had forgot to commit :-(

	* ftp.pm: don't let Timeout kill us

	* modparm.pm: rollback titi's modif

	* detect_devices.pm: cleanup

	* share/list: add integer.pm (needed by Time::Local (needed by Net::FTP))

2002/07/10  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* drakxtools.spec: list and describe all gui tools from drakxtools
	enhance cohenrency: step 1
	  - ide and scsi devices use channel rather than bus to store their
	  physical connection, which is more logic (at least for eide)
	  - all devices have their connection bus in bus field, not in bus for
	  {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
	
	  - detect_devices:getIDE() : add eide_hds hash in order to be able to
	  split info field between model and vendor
	
	  - harddrake::ui : code reduction allowed by the above changes
	fix parrallel build
	fix perl depandancy on new perl

	* diskdrake/interactive.pm, detect_devices.pm, install_steps.pm,
	harddrake/ui.pm: enhance cohenrency: step 1
	  - ide and scsi devices use channel rather than bus to store their
	  physical connection, which is more logic (at least for eide)
	  - all devices have their connection bus in bus field, not in bus for
	  {pci,usb,...} and interface_type for {scsi,eide,other_block_devices}
	
	  - detect_devices:getIDE() : add eide_hds hash in order to be able to
	  split info field between model and vendor
	
	  - harddrake::ui : code reduction allowed by the above changes

	* modparm.pm: typo fix
	no need to test two times if modinfo is executable in normal (ie not
	in drakx) case ...

	* Makefile, Makefile.drakxtools: remove all
	(use\s+(diagnostics|vars|strict)' instances

2002/07/09  Pixel  <pixel@mandrakesoft.com>

	* Makefile: have MDK::Common's in TAGS

	* detect_devices.pm: rewrite getSCSI, now handling scanners

	* share/list: adapt to new perl 5.8.0

	* common.pm, modparm.pm: move join_lines to common

2002/07/09  Pixel  <pixel@mandrakesoft.com>

	* Makefile: have MDK::Common's in TAGS

	* detect_devices.pm: rewrite getSCSI, now handling scanners

	* share/list: adapt to new perl 5.8.0

	* common.pm, modparm.pm: move join_lines to common

2002/07/09  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/TODO: fix boot freeze on hw change: initscript was running us
	with stdout
	redirected to /dev/null; just use a small sh wrapper to fix it
	update

	* standalone/service_harddrake.sh: 
	  - redirect stderr
	  - remove old commented stuff
	fix boot freeze on hw change: initscript was running us with stdout
	redirected to /dev/null; just use a small sh wrapper to fix it

	* Makefile.drakxtools: fix boot freeze on hw change: initscript was
	running us with stdout
	redirected to /dev/null; just use a small sh wrapper to fix it

	* standalone/service_harddrake: 
	  - configurator got displayed
	  - move timeout around configurator asking (still not 100% ok)
	time out after 200 seconds
	fix boot freeze on hw change: initscript was running us with stdout
	redirected to /dev/null; just use a small sh wrapper to fix it

	* drakxtools.spec: fix url
	add harddrake service wrapper
	really final changes
	final batch of changes for -3mdk ?
	fix boot freeze on hw change: initscript was running us with stdout
	redirected to /dev/null; just use a small sh wrapper to fix it

	* Makefile.config: add harddrake service wrapper to installed files

	* harddrake/ui.pm: 
	  - add channel: primary/slave for eide deivces
	  - get rid of ->{set,get}_user_data
	ensure we don't mix scsi and pci devices

	* harddrake/bttv.pm: log only if options set
	typo fix
	only log explanations in standalone mode

	* share/po/Makefile: fake make so that its builtin rule to create file
	from file.sh doesn't
	nuke service_harddrake with it wrapper

2002/07/08  daouda

	* standalone/drakbug: 
	  - detect package automatically when app is chosen

2002/07/08  Pixel  <pixel@mandrakesoft.com>

	* Makefile: create the list_modules symlink
	make test_pms should now work (was pb with list_modules.pm)

	* install_steps.pm, any.pm: mtools config so that "mdir a:" accesses the
	usb floppy if one is there

	* diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
	buttons) for the raid tab

	* install_steps_interactive.pm: in case the licence is refused, ask for
	confirmation

	* diskdrake/interactive.pm: make Clear_all work on a LVM VG
	make Clear_all remove partitions from raids

2002/07/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/TODO: remove fixed stuff

	* Makefile.drakxtools: s/PHONY/.PHONY/
	  - simplifications
	  - harddrake support is complete

	* drakxtools.spec: update
	fix post: add start argument
	service changes batch for 2mdk
	rpmlint fixes
	parrallel build
	1.1.8-2mdk
	  - enhance descriptions
	  - various spec clean
	split-up between harddrake and harddrake-ui
	complete changelog
	  - obsoletes/provides libdetect-lst, libdetect-lst-devel, detect,
	detect-lst
	  - don't restart harddrake on install
	  - some stuff moved into Makefile.drakxtools
	  - fix harddrake menu entry
	  - fix build

	* harddrake/data.pm: cache @devices so that hw probe is only done once

	* standalone/harddrake2: no need to 'use strict' in "binary"

	* standalone/service_harddrake: 
	  - only work on start
	  - add "please wait" message
	  - really don't cry when no previous config
	skip configuration on firt run
	skip hw classes without configurator (which'll have a configurator
	after porting updfstab)

	* harddrake/ui.pm: 
	  - rehide "run config tool" button when it has been displayed in
	another hw class
	don't display "run config tool" button if no configurator availlable
	  - center the main window
	  - remove drakx decorations
	mice:
	  - s/nbuttons/Number of buttons/
	  - delete qw(MOUSETYPE XMOUSETYPE unsafe)
	don't delete info field in normal path
	  - eide devices: split up info field into vendor and model fields
	  - complete help
	hummm ... eide: 0->master, 1->slave :-(
	  - remove save_report menu entry, this is done by service_harddrake
	  - move $in declaration near where it's used
	eide hard disks : print master/slave for bus_location

2002/07/08  daouda

	* Makefile.config: 
	  - add drakbug

	* drakxtools.spec: 
	  - add dir recursively

	* standalone/drakbug: 
	  - detect package automatically when app is chosen
	  - standalone app

2002/07/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/mount.c: small readability & size enhancement

2002/07/08  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: in case the licence is refused, ask for
	confirmation
	help perl_checker

	* diskdrake/hd_gtk.pm: do not display "Clear all" (and the other per kind
	buttons) for the raid tab

	* diskdrake/interactive.pm: make Clear_all work on a LVM VG
	make Clear_all remove partitions from raids

	* Makefile: create the list_modules symlink
	make test_pms should now work (was pb with list_modules.pm)

2002/07/08  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* harddrake/ui.pm: 
	  - remove save_report menu entry, this is done by service_harddrake
	  - move $in declaration near where it's used
	eide hard disks : print master/slave for bus_location
	  - remove dead stuff
	  - comment some stuff
	minor simplication
	various cleanups:
	  - move all harddrake modules to harddrake namespace
	 - replace two use by require so that it's not done at compil time
	   but at runtime
	 - there was a missing $ in harddrake::ui.pm

	* harddrake/TODO: update todo list

	* install_steps_interactive.pm, standalone/draknet, harddrake/bttv.pm,
	standalone/harddrake2, standalone/service_harddrake, harddrake/data.pm:
	various cleanups:
	  - move all harddrake modules to harddrake namespace
	 - replace two use by require so that it's not done at compil time
	   but at runtime
	 - there was a missing $ in harddrake::ui.pm

	* drakxtools.spec: 
	  - some stuff moved into Makefile.drakxtools
	  - fix harddrake menu entry
	  - fix build
	fixes for missing files
	enhanced description

	* modules.pm: 
	  - s/snd-card/snd/
	  - make some code clearer

	* Makefile.drakxtools: 
	  - simplifications
	  - harddrake support is complete

	* scanner.pm: this doesn't need either "#!/usr/bin/perl" nor "use lib
	qw(/usr/lib/libDrakX);"

	* standalone/drakxtv: 
	  - fix options handling
	  - use "perl -w"
	  - s/bttv/harddrake::bttv/ due to recent changes

2002/07/07  daouda

	* drakxtools.spec: 
	  - directory should exist before mv'ing things (mkdir
	%%buildroot%%_initrddir)

2002/07/07  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm: smarter raidAutoStartRaidtab
	great new raidAutoStartRaidtab allowing to handle existing software
	raids
	even when RAID_AUTORUN is not supported by kernel (which is the case for
	us
	since md.o is a not builtin the kernel)

	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
	software raids
	even when RAID_AUTORUN is not supported by kernel (which is the case for
	us
	since md.o is a not builtin the kernel)

	* devices.pm: use c::total_sectors() instead of BLKGETSIZE

	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
	marked dirty on any actions that destroy the raid

2002/07/07  daouda

	* Makefile: 
	  - remove share/wizard.rc in DISTFILE

	* drakxtools.spec: 
	  - directory should exist before mv'ing things (mkdir
	%%buildroot%%_initrddir)
	  - mv typo in %install section (titi sux)

2002/07/07  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm: smarter raidAutoStartRaidtab
	great new raidAutoStartRaidtab allowing to handle existing software
	raids
	even when RAID_AUTORUN is not supported by kernel (which is the case for
	us
	since md.o is a not builtin the kernel)
	remove detect_devices::check (including the annoying log about no
	modules for the pci entry)

	* modules.pm: new "append_to_etc_modules" function
	remove detect_devices::check (including the annoying log about no
	modules for the pci entry)

	* fsedit.pm: great new raidAutoStartRaidtab allowing to handle existing
	software raids
	even when RAID_AUTORUN is not supported by kernel (which is the case for
	us
	since md.o is a not builtin the kernel)

	* any.pm: small regexp cleanup

	* fs.pm, partition_table.pm: for greater symmetry with smb, drop isNfs in
	favour of isThisFs('nfs', ...)

	* interactive_newt.pm: make the buttons work in all cases
	  - workaround segfaults
	  - ensure the perl values are set when calling the clicked_may_quit
	callback

	* devices.pm: use c::total_sectors() instead of BLKGETSIZE

	* diskdrake/interactive.pm, raid.pm: ensure the raid is disactivated and
	marked dirty on any actions that destroy the raid

2002/07/06  Pixel  <pixel@mandrakesoft.com>

	* any.pm (ask_users): the user name length must be <= 32

	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
	  - in interactive::check_type, check if the package (like jfsprogs) is
	installed
	  - use interactive::check_type where usefull
	  - cleanup

	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
	it???)
	it is standalone/harddrake2, not standalone/harddrake (poor deush must
	be loosing his brain :p)

	* diskdrake/hd_gtk.pm: s/check_type/diskdrake::interactive::check_type/
	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
	  - remove unused wizard.rc
	(as suggested by Alexander Skwar)
	  - in interactive::check_type, check if the package (like jfsprogs) is
	installed
	  - use interactive::check_type where usefull
	  - cleanup

	* fsedit.pm: /root and /mnt must "remain within the root filesystem" (ie
	can't be used as mountpoints), dixit redhat
	(package_needed_for_partition_type): return the package needed for a
	partition type
	(check_type): cleanup

	* install_any.pm (setDefaultPackages): use
	fsedit::package_needed_for_partition_type to get things like jfsprogs

	* fs.pm: supermount now handles fs=auto, using it :)

	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
	  - remove unused wizard.rc

2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* Makefile.config: add the harddrake service which was missing

	* printer.pm: try to simplify

	* harddrake/ui.pm: simplify: use reverse
	  - help system:
	  - add an help entry in help menu;
	   - begin to describe information fields
	
	   - reformat license in about window
	
	  - information frame (mostly fixing incoherency between various hw
	  classes fields)
	
	   - s/media type/media class/
	
	   - s/info/Hardware id/
	
	   - s/device/device file/
	
	   - split description into manufacturer/description
	
	   - eide devices:
	
		  - rename bus as bus_location
	
	       - set interface_type as bus
	
	   - scsi devices:
	
	       - set bus to SCSI
	
		  - set bus_location to bus:id fields
	
	   - don't print pci subids when non set
	
	   - remove fields that were already used above (vendor id subvendor
	     subid pci_bus pci_device pci_function)
	
	  - no need to return window after program exit
	
	  - print usage if needed
	
	  - embed hardware tree in a "detected hardware" frame
	
	  - cleanups:
	
	   - rename widget2 as frame
	
	   - remove dead commented code

	* drakxtools.spec: add harddrake2 service

	* standalone/icons/harddrake2/webcam.png,
	standalone/icons/harddrake2/harddrake.png,
	standalone/icons/harddrake2/keyboard.png,
	standalone/icons/harddrake2/ide_hd.png,
	standalone/icons/harddrake2/cable.png,
	standalone/icons/harddrake2/video.png,
	standalone/icons/harddrake2/tape.png,
	standalone/icons/harddrake2/joystick.png,
	standalone/icons/harddrake2/harddisk.png,
	standalone/icons/harddrake2/usb.png,
	standalone/icons/harddrake2/memory.png,
	standalone/icons/harddrake2/hw_network.png,
	standalone/icons/harddrake2/scsi_hd.png,
	standalone/icons/harddrake2/unknown.png,
	standalone/icons/harddrake2/floppy.png,
	standalone/icons/harddrake2/hw_printer.png,
	standalone/icons/harddrake2/scanner.png,
	standalone/icons/harddrake2/cd.png,
	standalone/icons/harddrake2/isdn.png,
	standalone/icons/harddrake2/tv.png,
	standalone/icons/harddrake2/sound.png,
	standalone/icons/harddrake2/scsi.png,
	standalone/icons/harddrake2/cpu.png,
	standalone/icons/harddrake2/hw_mouse.png,
	standalone/icons/harddrake2/modem.png,
	standalone/icons/harddrake2/K7.png: add harddrake2 icons

2002/07/06  Pixel  <pixel@mandrakesoft.com>

	* any.pm (ask_users): the user name length must be <= 32

	* commands.pm: adapt to new modprobe.pm

	* diskdrake/hd_gtk.pm: 
	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
	  - remove unused wizard.rc
	(as suggested by Alexander Skwar)
	  - in interactive::check_type, check if the package (like jfsprogs) is
	installed
	  - use interactive::check_type where usefull
	  - cleanup

	* diskdrake/interactive.pm (as suggested by Alexander Skwar)
	  - in interactive::check_type, check if the package (like jfsprogs) is
	installed
	  - use interactive::check_type where usefull
	  - cleanup
	(Resize): resize2fs handles ext3 :)

	* install_any.pm (setDefaultPackages): use
	fsedit::package_needed_for_partition_type to get things like jfsprogs
	when merge_fstabs, handle in a different way mtab and fstab (or
	manualFstab)
	=> this allows to force the type&options in manualFstab

	* fsedit.pm (package_needed_for_partition_type): return the package needed
	for a partition type
	(check_type): cleanup

	* docs/comparisons: various remarks about mandrake

	* partition_table_lvm_PV.pm: Allows people having PVs on unpartitioned
	disks to install
	(but no way to create such beasts)

	* Makefile.config: standalone/drakbug doesn't exist! (why did deush add
	it???)
	it is standalone/harddrake2, not standalone/harddrake (poor deush must
	be loosing his brain :p)
	add harddrake pm's

	* partition_table.pm: Allows people having PVs on unpartitioned disks to
	install
	(but no way to create such beasts)
	cleanup

	* fs.pm: supermount now handles fs=auto, using it :)
	when merge_fstabs, handle in a different way mtab and fstab (or
	manualFstab)
	=> this allows to force the type&options in manualFstab

	* Makefile.drakxtools, my_gtk.pm, share/wizard.rc, drakxtools.spec: 
	  - move diskdrake.rc from /etc/gtk to /usr/share/libDrakX
	  - remove unused wizard.rc

2002/07/06  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* standalone/lsnetdrake: simplify

	* Makefile: add harddrake to DISTFILES

	* printer.pm: try to simplify

	* harddrake/TODO: add bits regarding eide and scsi

	* standalone/harddrake2: add missing 'use lib' due to harddrak::ui changes

	* harddrake/ui.pm: simplify: use reverse
	  - help system:
	  - add an help entry in help menu;
	   - begin to describe information fields
	
	   - reformat license in about window
	
	  - information frame (mostly fixing incoherency between various hw
	  classes fields)
	
	   - s/media type/media class/
	
	   - s/info/Hardware id/
	
	   - s/device/device file/
	
	   - split description into manufacturer/description
	
	   - eide devices:
	
		  - rename bus as bus_location
	
	       - set interface_type as bus
	
	   - scsi devices:
	
	       - set bus to SCSI
	
		  - set bus_location to bus:id fields
	
	   - don't print pci subids when non set
	
	   - remove fields that were already used above (vendor id subvendor
	     subid pci_bus pci_device pci_function)
	
	  - no need to return window after program exit
	
	  - print usage if needed
	
	  - embed hardware tree in a "detected hardware" frame
	
	  - cleanups:
	
	   - rename widget2 as frame
	
	   - remove dead commented code

	* harddrake/data.pm: add a configurator for sound

	* standalone/icons/harddrake2/cable.png,
	standalone/icons/harddrake2/tape.png,
	standalone/icons/harddrake2/usb.png,
	standalone/icons/harddrake2/hw_network.png,
	standalone/icons/harddrake2/unknown.png,
	standalone/icons/harddrake2/hw_printer.png,
	standalone/icons/harddrake2/scanner.png,
	standalone/icons/harddrake2/isdn.png,
	standalone/icons/harddrake2/cd.png,
	standalone/icons/harddrake2/scsi.png,
	standalone/icons/harddrake2/hw_mouse.png,
	standalone/icons/harddrake2/K7.png,
	standalone/icons/harddrake2/webcam.png,
	standalone/icons/harddrake2/harddrake.png,
	standalone/icons/harddrake2/keyboard.png,
	standalone/icons/harddrake2/ide_hd.png,
	standalone/icons/harddrake2/harddisk.png,
	standalone/icons/harddrake2/joystick.png,
	standalone/icons/harddrake2/video.png,
	standalone/icons/harddrake2/memory.png,
	standalone/icons/harddrake2/scsi_hd.png,
	standalone/icons/harddrake2/floppy.png,
	standalone/icons/harddrake2/sound.png,
	standalone/icons/harddrake2/tv.png, standalone/icons/harddrake2/cpu.png,
	standalone/icons/harddrake2/modem.png: add harddrake2 icons

2002/07/05  daouda

	* Makefile.config: 
	  - add harddrake drakbug drakTermServ to STANDALONEPMS_

	* drakxtools.spec: 
	  - snapshot
	  - new entries:
	o harddrake2 : new hardware detection && configuration tool
		o drakbugreport: bug reporting tool a la Kde (not working!)
		o drakTermServ : configuration tool for diskless stations.

2002/07/05  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (prepare_write_fstab): for supermount, have "none" as the device
	(cleaner, and
	more coherent with the "supermount" script (tx to FredC))

2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* install_steps_interactive.pm: minimize startup: only load
	harddrake::bttv if the user click on "tv
	card" field in the hw summary window
	use harddrake::bttv to let people configure their tv card if it's
	misdetected

	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
	a module)
	POSIX is no more used too.

	* harddrake/bttv.pm: remove device test: there're only two harddrake::bttv
	users,
	install_steps_interactive.pm and drakxtv which both have already
	tested that a bttv managed tv card is there.
	  - add more tv cards
	  - enable users to select number of buffers for mmap()
	  - better description for pll setting
	
	  - add tooltips help for some entries
	tv cards list:
	
		- split multi-cards entries
	
	     - reverse the hash (needed since now bttv card types are not
	       anymore unique)
	
		- complete the list from various sources
	
		- use a tree to display the list, it's clearer now since it's
	       splitted by vendors
	
	  - longer message
	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
	  standalone", ...)
	
	  - simplify bttv options managment:
	
	   - use if_, thanks MDK::Common
	
	   - s/mapn/map by using a hash at first
	
	   - s/mapn{if}/map{if_}
	
	  - don't read/write modules.conf here, drakx take care of that for us
	
	thus, the test program became:
	
	#!/usr/bin/perl
	
	use strict;
	use lib qw(/usr/lib/libDrakX);
	
	use standalone;
	use bttv;
	use interactive;
	use modules;
	
	modules::read_conf;
	bttv::config('interactive'->vnew());
	modules::write_conf;
	spec29: bttv configuration part of drakxtv.
	it can be used by:
	
	#!/usr/bin/perl
	
	use strict;
	use lib qw(/usr/lib/libDrakX);
	
	use standalone;
	use harddrake::bttv;
	use interactive;
	
	bttv::config('interactive'->vnew());

	* drakxtools.spec: fix typo
	fix dirs1/dirs2 mismatch
	  - M-q descriptions
	  - simplify file lists building
	  - we can use several -f on one "%%files" line

	* standalone/drakxtv: if we're root and there's a tv card managed by bttv,
	offer to
	configure bttv trough harddrake::bttv

	* tools/cvslog2changelog.pl: typo fix

	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"

2002/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile: 
	  - handle /lib/i686 case
	  - replace Mandrake/RPMS with Mandrake/RPMS*

2002/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/config.h,
	mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/version.h,
	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/pcmcia/cs.h,
	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/pcmcia/tcic.h,
	mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c:
	pcmcia is now pcmcia_ (it was to begin with a clean branch of unmodified
	sources)

2002/07/05  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: make it work with "use
	strict"
	do not look at the mar files anymore, only use kernel/modules.pl (and so
	list_modules.pm)

	* diskdrake/interactive.pm: handle comments in fstab

	* fs.pm (merge_info_from_fstab): try to keep options from merged fstab IF
	the entry is for the same mountpoint AND the same device
	handle comments in fstab

	* share/rpmsrate: add gnupg in "4 SYSTEM", so that rpm do not *Require*
	gnupg, only suggest it very strongly :)

	* mdk-stage1/usb-resource/update-usb-ids.pl: 
	  - do not use mar files for the list of modules, use list_modules.pm
	via kernel/modules.pl instead
	  - use read_pcitable to parse usbtable

2002/07/05  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* harddrake/ui.pm: remove uneeded "#!/...", standalone, lib, ... (this is
	a module)
	POSIX is no more used too.

	* drakxtools.spec: fix typo
	fix dirs1/dirs2 mismatch
	  - M-q descriptions
	  - simplify file lists building
	  - we can use several -f on one "%%files" line
	  - add preliminary harddrake support
	
	  - clean %post
	
	  - bump version number

	* harddrake/bttv.pm: 
	  - remove uneeded stuff for modules ("#!/..", "use lib..", "use
	standalone", ...)
	  - simplify bttv options managment:
	
	   - use if_, thanks MDK::Common
	
	   - s/mapn/map by using a hash at first
	
	   - s/mapn{if}/map{if_}
	
	  - don't read/write modules.conf here, drakx take care of that for us
	
	thus, the test program became:
	
	#!/usr/bin/perl
	
	use strict;
	use lib qw(/usr/lib/libDrakX);
	
	use standalone;
	use bttv;
	use interactive;
	use modules;
	
	modules::read_conf;
	bttv::config('interactive'->vnew());
	modules::write_conf;
	spec29: bttv configuration part of drakxtv.
	it can be used by:
	
	#!/usr/bin/perl
	
	use strict;
	use lib qw(/usr/lib/libDrakX);
	
	use standalone;
	use harddrake::bttv;
	use interactive;
	
	bttv::config('interactive'->vnew());

	* Makefile: don't use sed when not needed

	* install_steps_interactive.pm: minimize startup: only load
	harddrake::bttv if the user click on "tv
	card" field in the hw summary window
	use harddrake::bttv to let people configure their tv card if it's
	misdetected

	* harddrake/data.pm: remove uneeded "#!/.." and "use lib"

2002/07/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_auto_install.pm,
	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
	modules.pm

	* c/stuff.xs.pm: adapt to new ldetect

	* modules.pm: reworked, cleaned:
	  - the list of modules is moved to kernel/list_modules.pm (and a few
	functions too)
	  - new "add_probeall" function (similar to "add_alias")
	  -> used for scsi_hostadapter and usb-interface
	  - "load_multi" removed in favour of "load" which is now more powerful
	  - load_thiskind renamed load_category
	  - get_that_type renamed probe_category
	  - %modules::drivers dropped (handled for list_modules)
	still more cleanup to come

	* rescue/make_rescue_img: adapt to the move all.modules ->
	kernel/all.modules  and  all.kernels -> kernel/all.kernels

	* modparm.pm: rework, cleanup, simplify and make it work

	* install2: create symlink list_modules.pm in current directory for
	testing purpose

	* Makefile: when building the tar for drakxtools, handle specially
	list_modules.pm
	adapt to the move all.modules -> kernel/all.modules  and  all.kernels ->
	kernel/all.kernels

	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
	containing:
	  - all.modules all.kernels update_kernel
	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
	kernel/modules.pl
	  - update_kernel cleaned (it doesn't mention module names anymore, it
	is now in kernel/modules.pl)
	  - cleanup Makefile
	  - mdk-stage1 doesn't depend on perl-install anymore
	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)

	* any.pm: reworked & cleaned the kernel modules part
	  - adapt to new modules.pm
	  - adapt to new modparm.pm
	  - renamed setup_thiskind to load_category
	  - renamed setup_thiskind_backend to load_category_no_message

	* share/po/Makefile: make the "clean" rule less verbose

2002/07/04  daouda

	* standalone/draknet: 
	  - don't display clear password

2002/07/04  fcrozat

	* share/rpmsrate: Fix GNOME2 packages
	Install urw-fonts when installing XFree

2002/07/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

	* share/po/fr.po: updated French file

	* lang.pm: Changed some languages to defautl to utf-8
	removed X11_NOT_LOCALIZED (now Gnome2 fully supports right-to-left
	languages)

2002/07/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_auto_install.pm,
	install2.pm, network/ethernet.pm, network/isdn.pm, commands.pm,
	printerdrake.pm, mouse.pm, network/netconnect.pm, install_any.pm,
	install_steps.pm, detect_devices.pm, bootloader.pm: adapt to new
	modules.pm

	* c/stuff.xs.pm: adapt to new ldetect

	* modules.pm: reworked, cleaned:
	  - the list of modules is moved to kernel/list_modules.pm (and a few
	functions too)
	  - new "add_probeall" function (similar to "add_alias")
	  -> used for scsi_hostadapter and usb-interface
	  - "load_multi" removed in favour of "load" which is now more powerful
	  - load_thiskind renamed load_category
	  - get_that_type renamed probe_category
	  - %modules::drivers dropped (handled for list_modules)
	still more cleanup to come

	* getpkgs_deps, do_resize_fat: removed since unused

	* Makefile, rescue/make_rescue_img: adapt to the move all.modules ->
	kernel/all.modules  and  all.kernels -> kernel/all.kernels

	* modparm.pm: rework, cleanup, simplify and make it work

	* install2: create symlink list_modules.pm in current directory for
	testing purpose

	* mdk-stage1/pci-resource/update-pci-ids.pl: new directory "kernel"
	containing:
	  - all.modules all.kernels update_kernel
	  - part of perl-install/modules.pm now in kernel/list_modules.pm and
	kernel/modules.pl
	  - update_kernel cleaned (it doesn't mention module names anymore, it
	is now in kernel/modules.pl)
	  - cleanup Makefile
	  - mdk-stage1 doesn't depend on perl-install anymore
	(more precisely mdk-stage1/pci-resource/update-pci-ids.pl)

	* tools/specific_arch: simplified using MDK::Common

	* any.pm: reworked & cleaned the kernel modules part
	  - adapt to new modules.pm
	  - adapt to new modparm.pm
	  - renamed setup_thiskind to load_category
	  - renamed setup_thiskind_backend to load_category_no_message

	* share/po/Makefile: make the "clean" rule less verbose

2002/07/04  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* harddrake/TODO: add harddrake2 todo list

	* harddrake/data.pm: get rid of 'use vars'
	remove wait_message hack for printerdraker, better use class_discard
	harddrake2: "the return of the vengeance son"
	  - harddrake/data.pm: the data structure
	  - harddrake/ui.pm: the ui code
	
	  - standalone/service_harddrake: the init.d service (which need a few
	polishing (timeout, ...)
	
	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied

	* harddrake/ui.pm: don't stack signals on config buttons
	  - remove no more used @pid_launched
	  - better GUI reactivity: don't wait for config tool to complete, just
	  "fork and forget" [(c) us air force] and refuse to run another
	  config tool until the first one to complete
	print "Running $configurator ..." in status bar while running a config
	tool
	  - POSIX is needed for POSIX::wait
	  - move strict and standalone require at top
	
	  - c is unused
	
	  - comment exceptions in devices loop (ie skip classes without any
	  devices or any detector
	
	  - optimize away $pid
	fix move from harddrake.pm to harddrake/data.pm:
	
	  - menu does appear
	
	  - information fields are translated from raw to english again
	harddrake2: "the return of the vengeance son"
	
	  - harddrake/data.pm: the data structure
	
	  - harddrake/ui.pm: the ui code
	
	  - standalone/service_harddrake: the init.d service (which need a few
	polishing (timeout, ...)
	
	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied

	* detect_devices.pm: add tapes() for harddrake2

	* standalone/harddrake2, standalone/service_harddrake: harddrake2: "the
	return of the vengeance son"
	  - harddrake/data.pm: the data structure
	  - harddrake/ui.pm: the ui code
	
	  - standalone/service_harddrake: the init.d service (which need a few
	polishing (timeout, ...)
	
	  - standalone/harddrake2: the ui caller which need to be dadou/ln -fied

2002/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/probing.c: fixed static definition when non static
	declaration (gcc limitation).
	added conditional code around network detection.

2002/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/minilibc.c,
	mdk-stage1/newt/newt.c, mdk-stage1/bzlib/bzlib.c,
	mdk-stage1/newt/listbox.c, mdk-stage1/newt-frontend.c,
	mdk-stage1/disk.c, mdk-stage1/modules.c, mdk-stage1/stage1.c,
	mdk-stage1/newt/checkboxtree.c, mdk-stage1/mar/mar-frontend.c,
	mdk-stage1/Makefile.common, mdk-stage1/url.c, mdk-stage1/newt/textbox.c,
	mdk-stage1/newt/grid.c, mdk-stage1/dhcp.c, mdk-stage1/init.c,
	mdk-stage1/automatic.c, mdk-stage1/newt/entry.c: compile with -W

2002/07/02  daouda

	* my_gtk.pm: 
	  - fill a combo by default :
	gtkcombo_setpopdown_strings($combo_widget,@strings)

2002/07/02  gbeauchesne

	* c/smp.c: 
	  - TODO: Update ia64 check with /proc/pal/cpuX ?
	  - TODO: Update x86_64 check when SMP machines are actually available
	  - Conditionalize compilation of main() with TEST macro

2002/07/02  Pixel  <pixel@mandrakesoft.com>

	* network/smb.pm: try harder to find the full list of servers available,
	using "smbclient -L" to
	check the workgroup masters

2002/07/01  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm (raw_hd_mount_point): nicer default mount point

2002/06/28  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm, network/smb.pm, network/smbnfs.pm: 
	  - add authentification in diskdrake --smb (esp. for windows NT)
	  - use "credentials=" to put the passwords
	(ideas and investigations from Stew Benedict,
	integrated by Pixel, but need testing)
	Known bug: if you want to change the password when there are 2 entries
	in fstab
	  using the same username=/password=, writing the credentials is done in
	random order,
	  => you've got one chance in 2 that the password is changed :-(

	* fs.pm: 
	  - add authentification in diskdrake --smb (esp. for windows NT)
	  - use "credentials=" to put the passwords
	(ideas and investigations from Stew Benedict,
	integrated by Pixel, but need testing)
	Known bug: if you want to change the password when there are 2 entries
	in fstab
	  using the same username=/password=, writing the credentials is done in
	random order,
	  => you've got one chance in 2 that the password is changed :-(
	handle spaces in mount points and devices (using \040)

2002/06/27  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakTermServ, standalone/icons/drakTS.620x57.png: Add
	drakTermServ application and icon.

2002/06/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm, install2.pm: ensure
	licence step is asked in any case (ie. even when selectLanguage is
	automatic)

	* any.pm: "my" variables where needed

2002/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po, share/po/ar.po: Updated po files

2002/06/19  Frederic Lepied  <flepied@mandrakesoft.com>

	* Makefile: corrected rules to make distributable rpms.

2002/06/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* patch/patch-oem-hp.pl: added patch-oem.pl file used to generate HP
	Mandrake Linux 8.2.

2002/06/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: remove a few drivers so that hd.img and network.img are
	possible with latest BOOT kernel

2002/06/19  Pixel  <pixel@mandrakesoft.com>

	* standalone/fileshareset: use "wide links = no" for exporting via samba
	(thanks to Jan Sch�fer)

	* fs.pm: mounting of ntfs after install really mount the partition (thanks
	to Buchan Milne)

2002/06/18  daouda

	* my_gtk.pm: 
	  - add gtkset_text, gtkprepend_text, gtkappend_text for entry widgets

2002/06/18  Frederic Lepied  <flepied@mandrakesoft.com>

	* Makefile.drakxtools: manage security subdir.

	* Makefile: added targets to build test and distribution rpms and srpms
	(localrpm,
	localsrpm, rpm, srpm).
	added security to the installed directories

	* pam.net_monitor, diskdrake/diskdrake.html, drakxtools.spec,
	apps.net_monitor: ripped from the srpm

2002/06/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Hungarian file

2002/06/17  cbelisle

	* standalone/draksec: added server, user and network advanced options

	* any.pm: draksec: customize entries for each options (lists, checkboxes
	and text boxes)
	Added user,server and network advanced options

	* security/msec.pm: 
	  - Customize entries for each options (checkboxes, text boxes and
	lists)
	added network, server and user advanced options

2002/06/15  alus

	* share/po/pl.po: updates

2002/06/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: Catalan doesn't have French fallback anymore

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/06/11  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm: added /tmp in @suggestions_mntpoints (as suggested by
	Philippe Coulon)

2002/06/10  cbelisle

	* standalone/draksec: Add an entry for the security user email

	* security/msec.pm: Initial commit

	* any.pm: Add security user email entry in draksec

2002/06/10  daouda

	* network/tools.pm: 
	  - choose country according to timezone.

2002/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/syncrpms: english fix

2002/06/10  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm: s/class/class_/ for ldetect 0.4

2002/06/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* timezone.pm: remove duplicate entry in ntp_servers

	* interactive_gtk.pm, my_gtk.pm: split ask_browse_tree_info from
	interactive_gtk
	to my_gtk between widgets creation and real
	stuff so that we can now call it with widgets
	places differently

2002/06/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated po file

2002/06/05  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: adapt to new lilo

2002/06/05  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs

	* bootloader.pm: adapt to new lilo

2002/06/05  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs

2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
	fixes thx to vincent meyer

2002/06/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
	instead of weird style
	with clearall unset & auto_allocate set

2002/05/29  alus

	* share/po/pl.po: little fixes

2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
	small typo
	remove typo (hopefully really a typo ;p)

	* any.pm: be a bit more polite

2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: make sure patch is always read after defcfg to take
	precedance.

2002/05/27  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: have usb-interface1 for ehci-hcd

2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* Xconfigurator.pm: dams fixes a bug in the install :-)

2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: xtraceroute needs 3d

2002/05/15  alus

	* share/po/Changelog: info about polish translation

2002/05/14  alus

	* share/po/pl.po: polish finished
	updated polish translation
	polish updated to near finished. Fuzzy removed and checked

2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* docs/HACKING: libncurses* also for the sucking neuneux

2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pl.po, share/po/id.po: updated po file

2002/05/13  alus

	* share/po/pl.po: mostly finished polish translation.!!

2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* docs/HACKING: libbzip2* and more explanations about failing compilation

	* mdk-stage1/Makefile, mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/probing.c:
	adapt to gcc-3.1

2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: Put back xcin as default XIM for zh_TW.Big5

	* share/po/eu.po: small corrections

2002/04/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/usb-resource/update-usb-ids.pl: support USB2 controllers as
	well

2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po, share/po/hu.po: updated po files

2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
	one in reality.

	* detect_devices.pm: updated usbMice to take care of device declared as
	Mouse:USB in usbtable (was
	not the case !)

2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* bootlook.pm: a few english fixes

	* any.pm: fixes
	english fixes from v meyer
	a few english fixes thx to vincent meyer

2002/04/19  alus

	* share/po/pl.po: It's only about 100 entries to the end

2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

	* share/po/hu.po: updated po file

2002/04/18  alus

	* share/po/pl.po: 3 more long messages
	one entry
	stil working....

2002/04/17  alus

	* share/po/pl.po: Mostly finished polish translation
	translations, fixes etc...

2002/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: final candidate.

	* rescue/tree/etc/oem: final candidate.
	add gcc-cpp to oem install.

2002/04/16  alus

	* share/po/pl.po: still working
	Few fixes
	Updated translation. Many strings is not yet translated...

2002/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: sync with oem-prepare
	fixed stupid error.
	forget packdrake module invocation.
	fixed to support non standard rpm filename.

	* tools/oem-prepare: add gcc-cpp to always installed.
	disable unselection of some package (gmc, all gcc3.0 stuff).

2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: only main version of automake

2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated po file

2002/04/16  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
	dialog box

2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: ipchains now conflicts with iptables

2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: Another small fix
	Small corrections

2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ro.po: merged with drakfloppy strings

2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/mt.po: updated Maltese file

2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: small typo correction

2002/04/10  warly

	* share/rpmsrate: autofs -> 2

2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
	and iptables
	packages conflict

2002/04/09  Pixel  <pixel@mandrakesoft.com>

	* partition_table_dos.pm, partition_table_gpt.pm,
	partition_table_empty.pm, partition_table_bsd.pm,
	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
	error message (thanks to Brian J. Murrell)

2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fixed a bunch of things

	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
	strings

2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
	drakfloppy strings

2002/04/07  Yves Duret <yduret@mandrakesoft.com>

	* standalone/drakfloppy: moving from his own rpm to drakxtools

	* Makefile.config: add drakfloppy to STANDALONEPMS_

2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt

2002/04/04  sdupont

	* standalone/drakbackup: please yduret, do not commit these changes on cvs
	before to test it.
	you can say "bugs fixes" only if you have corrected  some errors but not
	if you create it!
	the backup on cd was disabled because the backend is not available for
	moment.

	* standalone/drakfont: remove uninteresting yduret changes,
	would it be possible to know what are your "bugs fixies" ?
	to yduret: I'm the creator of this program so please do not remove my
	changes.

2002/06/05  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: use -ff for mkreiserfs, do not use -q for mkreiserfs

2002/06/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, install_steps_interactive.pm, any.pm,
	install_steps_gtk.pm, mdk-stage1/network.c, mdk-stage1/disk.c: english
	fixes thx to vincent meyer

2002/06/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: have the /root/drakx/auto_install.cfg.pl replay style
	instead of weird style
	with clearall unset & auto_allocate set

2002/05/29  alus

	* share/po/pl.po: little fixes

2002/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive_gtk.pm: remove typo fix when it's not a fix :-)
	small typo
	remove typo (hopefully really a typo ;p)

	* any.pm: be a bit more polite

2002/05/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: make sure patch is always read after defcfg to take
	precedance.

2002/05/27  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: have usb-interface1 for ehci-hcd

2002/05/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* Xconfigurator.pm: dams fixes a bug in the install :-)

2002/05/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: xtraceroute needs 3d

2002/05/15  alus

	* share/po/Changelog: info about polish translation

2002/05/14  alus

	* share/po/pl.po: polish finished
	updated polish translation
	polish updated to near finished. Fuzzy removed and checked

2002/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* docs/HACKING: libncurses* also for the sucking neuneux

2002/05/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pl.po, share/po/id.po: updated po file

2002/05/13  alus

	* share/po/pl.po: mostly finished polish translation.!!

2002/05/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* docs/HACKING: libbzip2* and more explanations about failing compilation

	* mdk-stage1/Makefile, mdk-stage1/probing.c: adapt to gcc-3.1

2002/05/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: Put back xcin as default XIM for zh_TW.Big5

	* share/po/eu.po: small corrections

2002/04/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po, share/po/hu.po: updated po files

2002/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed some machine with two present i830 CGC but only
	one in reality.

	* detect_devices.pm: updated usbMice to take care of device declared as
	Mouse:USB in usbtable (was
	not the case !)

2002/04/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/04/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* bootlook.pm: a few english fixes

	* any.pm: fixes
	english fixes from v meyer
	a few english fixes thx to vincent meyer

2002/04/19  alus

	* share/po/pl.po: It's only about 100 entries to the end

2002/04/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

	* share/po/hu.po: updated po file

2002/04/18  alus

	* share/po/pl.po: 3 more long messages
	one entry
	stil working....

2002/04/17  alus

	* share/po/pl.po: Mostly finished polish translation
	translations, fixes etc...

2002/04/16  alus

	* share/po/pl.po: still working
	Few fixes
	Updated translation. Many strings is not yet translated...

2002/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: only main version of automake

2002/04/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated po file

2002/04/16  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: handle "Cancel" on NIS / LDAP server
	dialog box

2002/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: ipchains now conflicts with iptables

2002/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: Another small fix
	Small corrections

2002/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ro.po: merged with drakfloppy strings

2002/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/mt.po: updated Maltese file

2002/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: small typo correction

2002/04/10  warly

	* share/rpmsrate: autofs -> 2

2002/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: time to remove ipchains/2.2 stuff since now ipchains
	and iptables
	packages conflict

2002/04/09  Pixel  <pixel@mandrakesoft.com>

	* partition_table_dos.pm, partition_table_gpt.pm,
	partition_table_empty.pm, partition_table_bsd.pm,
	partition_table_sun.pm, partition_table_mac.pm: nicer debug "bag magic"
	error message (thanks to Brian J. Murrell)

2002/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fixed a bunch of things

	* install_steps_interactive.pm, install_interactive.pm, network/isdn.pm,
	partition_table.pm, install_steps_gtk.pm, Xconfigurator.pm,
	printerdrake.pm, network/tools.pm, diskdrake/interactive.pm,
	network/netconnect.pm, fsedit.pm, diskdrake/removable_gtk.pm,
	network/network.pm, printer.pm, interactive_stdio.pm: fix a few english
	strings

2002/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/mt.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: merged with
	drakfloppy strings

2002/04/07  Yves Duret <yduret@mandrakesoft.com>

	* standalone/drakfloppy: moving from his own rpm to drakxtools

	* Makefile.config: add drakfloppy to STANDALONEPMS_

2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt

2002/04/04  sdupont

	* standalone/drakbackup: please yduret, do not commit these changes on cvs
	before to test it.
	you can say "bugs fixes" only if you have corrected  some errors but not
	if you create it!
	the backup on cd was disabled because the backend is not available for
	moment.

	* standalone/drakfont: remove uninteresting yduret changes,
	would it be possible to know what are your "bugs fixies" ?
	to yduret: I'm the creator of this program so please do not remove my
	changes.

2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt

2002/04/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* c/Makefile.PL: rpmlib 4.0.4 now also needs libpopt

2002/04/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
	doesn't use $ENV{SECURE_LEVEL} anymore

2002/04/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: setting /etc/sysconfig/msec for chkconfig which
	doesn't use $ENV{SECURE_LEVEL} anymore

2002/04/02  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: do not have "root=" with no root (needed for memtest)
	(thanks to Borsenkow Andrej)

	* share/rpmsrate: add tmpwatch (since it is not mandatory any more)

2002/03/30  Yves Duret <yduret@mandrakesoft.com>

	* standalone/drakbackup, standalone/drakfont: bugs fixes, code clean up,
	more mdkish..

2002/03/26  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Fixed several problems related to HP
	multi-function devices:
	  - Parallel multi-function devices worked only on the first (onboard)
	parallel
	port.
	  - HP LaserJet 2200 needs HPOJ for printing via USB.
	  - For the HP OfficeJet D series the scanning instructions were not
	shown.
	  - HPOJ does not work with HP PhotoSmart 10xx, 11xx, and 12xx.

2002/03/22  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: cleaned gtkpowerpack

2002/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: use /root rather than /tmp for some temp files (security
	suxx)

2002/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/list: rpm 4.0.4

	* mdk-stage1/network.c: don't save DHCP_HOSTNAME if the value is void

2002/03/20  sdupont

	* standalone/drakfont: fixing problems
	exchanging: ttmkfdir by  /usr/X11R6/bin/mkttfdir
	which generate correct fonts.dir

	* standalone/drakbackup: remove backup on cd

2002/03/20  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* standalone/drakxtv: use log for what is not related to explanations

2002/03/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/updatehdlist: take care of commercial medium (not syncable).

2002/03/19  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* standalone/drakxtv: 
	  - default tv norm is pal rather than ntsc (because of alphabetical
	sort) since it's the most used tv norm
	  - figure out tv norm & country (aka frequency table) from locales
	
	  - add a hash based on lang in order to do this
	
	  - add --no-guess if one doesn't want drakxtv to automagically guess tv
	  norm and geographic area through locales (lang.pm)
	
	  - log with standalone::explanations:
	
		 - guessed values from locales: language, tv norm and country
	
		 - runned command to scan for tv channels
	
	  	 - ~/.xawtv creation
	
	
	  - s/bcast/broadcast/ in displayed messages
	
	  - add -h and --help support

2002/03/18  dam's  <damien@mandrakesoft.com>

	* install_gtk.pm, mouse.pm, my_gtk.pm: corrected create_xpm API

2002/03/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: fixed to support rpm filename incoherent to standard
	naming for commercial
	packages (commercial are *really* shit (almost, for the hope) all the
	time ?)

2002/03/16  dam's  <damien@mandrakesoft.com>

	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
	connection.

2002/03/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/ar.po: updated po file

2002/03/16  Pixel  <pixel@mandrakesoft.com>

	* network/ethernet.pm: small cleanup on untested code (need testing:)

2002/03/16  dam's  <damien@mandrakesoft.com>

	* network/ethernet.pm: we now consider dhcp provide GATEWAY and internet
	connection.

2002/03/16  Pixel  <pixel@mandrakesoft.com>

	* network/ethernet.pm: small cleanup on untested code (need testing:)

2002/03/15  fabman

	* share/po/es.po: updated bad lilo/grub/yaboot translation
	updated spanish translations

2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: force mkinitrd *really* for bootsplash.
	force initrd regeneration for oem on some case (maybe the cause of
	bootsplash
	perturbation, as maintainer don't even known why it is running correctly
	:-)

	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
	on file (typical
	for updates).

	* share/rpmsrate: remove doublon on NVIDIA_nforce.
	update to 6mdk for NVIDIA_nforce*

2002/03/15  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;

	* install_steps_interactive.pm: 
	  - remove obsolete code
	  - the result is to use directly $availableC instead $size2install
	which was min($availableC, $max_size)

2002/03/15  dam's  <damien@mandrakesoft.com>

	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
	the way we wrap for the advertising

	* install_steps_gtk.pm: submitting widget instead of style (style/font
	initialization bug from gtk

	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
	handling of ugly language (/ja|zh/)

2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: do not try to get synthesis if hdlist is available as an handle
	on file (typical
	for updates).

	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
	@euro appended for 8.1).

2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
	ones

2002/03/15  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: yet again add some dropped entities from drakx-help.xml
	add the dropped &linux-mandrake; &mandrake-linux; and a few &os-linux;
	s/Linux Mandrake/Mandrake Linux/ (from the drakx-help.xml not merged)

	* keyboard.pm (unpack_keyboards): return undef on error

2002/03/15  dam's  <damien@mandrakesoft.com>

	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
	the way we wrap for the advertising

	* install_steps_gtk.pm: submitting widget instead of style (style/font
	initialization bug from gtk

	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
	handling of ugly language (/ja|zh/)

2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
	@euro appended for 8.1).

2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
	ones

2002/03/15  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
	drakx-help.xml not merged)

	* keyboard.pm (unpack_keyboards): return undef on error

2002/03/15  dam's  <damien@mandrakesoft.com>

	* share/po/ja.po: reverted ' \n' from pablo because I managed to correct
	the way we wrap for the advertising

	* install_steps_gtk.pm: submitting widget instead of style (style/font
	initialization bug from gtk

	* my_gtk.pm: corrected get_text_coord : widget instead of style, and
	handling of ugly language (/ja|zh/)

2002/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: update lang according to lang.pm of 8.2 (remove
	@euro appended for 8.1).

2002/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added xx_YY -> keyboard lines in addition of xx -> keyboard
	ones

2002/03/15  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/ (from the
	drakx-help.xml not merged)

	* keyboard.pm (unpack_keyboards): return undef on error

2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po: updated po file

2002/03/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakxtv: english

2002/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/da.po, share/po/no.po: updated po files

	* share/po/eu.po: updated po file

	* lang.pm: changed LANGUAGE for basque

	* share/po/ja.po: added \n in advertising

2002/03/14  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: CHARSET"iso-8859-1" and CHARSET"iso-8859-15" is no good
	for english which has CHARSET"C", adding it

	* share/rpmsrate.server: obsolete

2002/03/14  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* standalone/drakxtv: 
	  - add SECAM to france description to ease user comprehension
	  - remove unused variables
	  - revert gc & dam's (also known as the usual suckers) garbage
	  who'ven't the hardware to test:
	
		- explain in source why we don't try to install xawtv (see below)
	
		- just display a message if xawtv isn't installed
		  since drakx should have installed it
	
		- let it be runned as root again (how many times i'm
		  supposed to restore this behaviour)
	
		- retest with a tv card
	
	  - use %ENV rather than relying on shell ~ expansion
	
	  - if tv card wasn't detected, ask the user to spam us
	
	  - factorize $in->exit() out of scan4tvchannels()
	
	  - add to TODO list the possibility to install xawtv if needed
	
	  - check scantv return value and display an error message
	
	  - also if the wrapper was runned on console, display a nice
	  message saying one can now run xawtv under X11

2002/03/14  warly

	* share/rpmsrate: add commercial apps

2002/03/14  Yves Duret <yduret@mandrakesoft.com>

	* standalone/logdrake: fix some bug
	fix * bug in field matching/ not matching

2002/03/13  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: new gfx

2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: sync with oem (removed mach32 server).
	sync with oem.
	remove bzflag.
	synced with oem script.

	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
	remove Mach8 and Mono driver for oem only.
	remove bzflag.
	fixed closure selection on sub groups (like 3D),
	moved some big package out of oem,
	minor fixes.

2002/03/13  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: new gfx

2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: sync with oem (removed mach32 server).
	sync with oem.
	remove bzflag.
	synced with oem script.

	* rescue/tree/etc/oem: remove Mach32 XF3.3.6 server too.
	remove Mach8 and Mono driver for oem only.
	remove bzflag.
	fixed closure selection on sub groups (like 3D),
	moved some big package out of oem,
	minor fixes.

2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po, share/po/eu.po: updated po files

2002/03/13  warly

	* share/rpmsrate: add aspell-fr and en for gabber require

2002/03/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed closure selection on sub groups (like 3D),
	moved some big package out of oem,
	minor fixes.

	* tools/oem-prepare: synced with oem script.

2002/03/13  gbeauchesne

	* share/rpmsrate: 
	  - Add openoffice with weight = 2

2002/03/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po, share/po/vi.po, share/po/cs.po, share/po/hu.po,
	share/po/eu.po: updated po files

	* lang.pm: small console font changes
	set default console fotns for latin1/0 to lat1-16 and lat0-16;
	the font lat0-sun16 is missing some chars of iso-8859-1/15 !

2002/03/13  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: add gcc and gcc-c++ in @preferred

2002/03/13  warly

	* share/rpmsrate: add aspell-fr and en for gabber require

2002/03/12  dam's  <damien@mandrakesoft.com>

	* network/network.pm: onboot option only in expert mode
	corrected domainname bug; added onboot option

2002/03/12  dam's  <damien@mandrakesoft.com>

	* standalone/drakbackup, standalone/drakfont: minor bug correction

	* standalone/net_monitor: greater timeout

	* network/tools.pm, network/netconnect.pm: changed timeout for testing
	internet connection

2002/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: remove synthesis if not found (filesize is 0)

	* Xconfigurator.pm: avoid Utah GLX only if > 800MB, not if <= 800MB (!)

	* install_any.pm: added fix to support update hdlist renaming (ie hdlist
	of update are always hdlist.cz).
	remove old synthesis file, to make sure gzip can build a new one.

	* share/rpmsrate: added nforce support (hack by adding kernel version
	inside)

2002/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

	* share/po/ga.po: fixed email address

	* share/po/zh_TW.po: updated po file

2002/03/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, bootloader.pm: don't have "quiet" boot in the server
	meta_class

	* pkgs.pm: "fam" is not a naughtyServers
	remove the old "boa" comment
	adapt naughtyServers for 8.2

2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: a few missing translations

2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt.po, share/po/ga.po, share/po/de.po, share/po/az.po,
	share/po/pt_BR.po, share/po/nl.po, share/po/ja.po, share/po/id.po,
	share/po/ar.po, share/po/mt.po, share/po/eo.po, share/po/da.po: updated
	po files

	* share/po/eu.po, share/po/it.po: updated po files
	merged with new strings from manuals

	* share/po/DrakX.pot, share/po/fr.po: merged with new strings from manuals

	* share/po/be.po, share/po/bg.po, share/po/et.po, share/po/hr.po,
	share/po/ko.po, share/po/is.po, share/po/pl.po, share/po/no.po,
	share/po/fi.po, share/po/el.po, share/po/lt.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/bs.po,
	share/po/cs.po, share/po/af.po: updated po files (finished merging with
	manual strings)
	updated po files

	* share/po/hu.po: updated po files
	updated po files

	* share/po/cy.po: updated po file
	updated po files

	* share/po/es.po: updated Spanish

	* share/po/sp.po, share/po/zh_CN.po, share/po/sr.po, share/po/tr.po,
	share/po/ru.po, share/po/wa.po, share/po/sv.po, share/po/th.po,
	share/po/sk.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
	share/po/ro.po, share/po/zh_TW.po: updated po files (finished merging
	with manual strings)

2002/03/11  dam's  <damien@mandrakesoft.com>

	* Makefile.config: added drakproxy

	* standalone/drakxtv: added embedded mode

2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: for updates, make tree as flat instead in order to
	see all packages.

2002/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: webmin: 3

	* standalone/drakxtv: 
	  - install xawtv when necessary instead of
	telling people to use urpmi (titi sucks)
	  - prints out a message when no tv card
	has been detected

	* share/po/fr.po: small ortograf

2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po, share/po/it.po, share/po/eu.po: merged with new strings
	from manuals

	* share/po/DrakX.pot: merged with new strings from manuals
	updated GErman file

	* share/po/de.po: updated GErman file

	* share/po/es.po: updated Spanish

2002/03/11  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (fullname2mouse): workaround when "1 Button" is not found

	* install_steps.pm, install2.pm: 
	  - default security level now set in miscellaneousBefore
	  - default security level is 3 in meta_class server

	* install_any.pm: 
	  - fix the setting of compssUsersChoices in auto_install when it is
	empty
	  - set the default compssUsersChoices adapted to the server meta_class

	* share/rpmsrate: remove phpgroupware from OFFICE (since it appeas twice,
	the rate is 4, and it requires apache, and ...)

	* Makefile: upload the various compssUsers* (esp. compssUsers.server)

	* install_steps_gtk.pm: 
	  - remove the hack for not displaying Utilities in classic meta_class
	  - new compssUsers groups for the server meta_class

	* share/compssUsers: remove "Utilities" here instead of removing it
	hackily in install_steps_gtk

	* share/compssUsers.server: fix the path=Utilities for the Utilities
	section

2002/03/11  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Small text fix.
	Security fix: Give a warning that SMB passwords can easily be revealed
	by normal users when printing on a Windows-hosted printer is set up.

	* detect_devices.pm: Reverted parts of the last change, they broke in
	non-DevFS environments (e. g. during installation).

2002/03/11  warly

	* share/rpmsrate: add bwbserver_linux in rpmsate for BeeWeb server

	* share/compssUsers.server: remove ICEWM choice

2002/03/11  Yves Duret <yduret@mandrakesoft.com>

	* tools/cvslog2changelog.pl: added yduret entry in user.

2002/03/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: add Rage Mobility as bad card for XF4 (was already bad
	card for XF3) (g�g� report).

2002/03/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help file

	* share/po/de.po, share/po/DrakX.pot: updated GErman file

2002/03/11  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/interactive.pm (Mount_point): when files exist in the chosen
	mount point, propose migration

	* install_steps_interactive.pm: search /commercial/i instead of
	/Application/ before showing the commercial license

	* standalone/drakboot, bootloader.pm: fix Stew sucks

	* install2.pm, install_steps.pm: 
	  - default security level now set in miscellaneousBefore
	  - default security level is 3 in meta_class server

	* install_steps_gtk.pm: 
	  - remove the hack for not displaying Utilities in classic meta_class
	  - new compssUsers groups for the server meta_class
	search /commercial/i instead of /Application/ before showing the
	commercial license

	* install_any.pm: 
	  - fix the setting of compssUsersChoices in auto_install when it is
	empty
	  - set the default compssUsersChoices adapted to the server meta_class

	* Makefile: upload the various compssUsers* (esp. compssUsers.server)

	* share/compssUsers: remove "Utilities" here instead of removing it
	hackily in install_steps_gtk

	* share/compssUsers.server: fix the path=Utilities for the Utilities
	section

2002/03/11  yduret

	* standalone/scannerdrake: re-re-re-re-re-re-uncomment the pkgs check
	line.

2002/03/10  chipaux

	* share/po/fr.po: Corrected few typo mistakes.

2002/03/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps.pm: gcize damienization

	* share/rpmsrate: put userdrake together with drakconf so that
	userdrake is not missing (till)

2002/03/10  siegel

	* share/po/help_xml2pm.pl: added tag filename

	* any.pm: added missing i18n _()

	* share/po/de.po: update
	and still fixes ...
	updates
	update

2002/03/10  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Protect the Star Office/OpenOffice.org configuration against
	manual changing of the "update-alternatives" assignment of the "lpr"
	command.

	* detect_devices.pm: Made USB printer auto-detection more stable and
	reliable.

2002/03/10  yduret

	* standalone/scannerdrake: added ASK DEVICE support

	* scanner.pm: added ASK support for more interactiveness during
	configuration

2002/03/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c: comply better to ClientID stuff

2002/03/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po: updated po file

2002/03/09  yduret

	* standalone/scannerdrake: added sum up at the end
	uncomment line that checks if sane rpm is installed or not (thx gc).
	i sux,

2002/03/08  dam's  <damien@mandrakesoft.com>

	* standalone/drakproxy: drakproxy rewritten
	working drakproxy

	* install_steps.pm: corrected network up/down when network install

	* standalone/drakfont: ergonomy changed to fit in mcc
	corrected network up/down when network install

	* network/network.pm: proxy settings corrected

2002/03/08  fabman

	* share/po/es.po: updated spanish translation

2002/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed allowNVIDIA_rpms to take care of new kernel naming
	conventions.

	* standalone/XFdrake: fixed NVIDIA support to use newer kernel naming
	conventions.

	* Xconfigurator.pm: fixed possible additional XFree packages not installed
	if server is already
	installed.

2002/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: missing translations + a few changes

	* mdk-stage1/probing.c: have 4 seconds of delay for usb stuff
	to show up rather than seconds

2002/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po, share/po/it.po: updated po files

	* share/po/es.po: corrected typo

	* share/po/da.po: updated Danish file

	* lang.pm, share/locales-skeleton.tar.bz2: Added symlinks in
	locales-skeleton so non primary chinese encodings
	can work

	* share/po/ar.po: updated po file

	* share/po/cy.po: removed the "translation" of licence, it was random
	text.

2002/03/07  dam's  <damien@mandrakesoft.com>

	* share/po/fr.po, modparm.pm: corrected

2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/newt-frontend.c: english fix thx to till & phil

2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po: updated po file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
	share/po/af.po: updated pot file

2002/03/07  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: removing quota choices for reiserfs

2002/03/07  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: make gc happy

	* modparm.pm, share/po/fr.po: corrected

	* standalone/draknet: corrected network/internet restart when already
	connected

	* network/netconnect.pm: corrected bad previous behaviour

	* standalone/drakfont: corrected bad system command

	* share/advertising/02-internet_icon.png,
	share/advertising/05-contcenter_icon.png,
	share/advertising/10-MDKexpert_icon.png, share/advertising/06-user.pl,
	share/advertising/08-games.pl, share/advertising/02-internet.pl,
	share/advertising/03-graphic_icon.png, share/advertising/07-server.pl,
	share/advertising/12-MDKstore_icon.png,
	share/advertising/06-user_icon.png,
	share/advertising/07-server_icon.png, share/advertising/09-MDKcampus.pl,
	share/advertising/10-MDKexpert.pl, share/advertising/05-contcenter.pl,
	share/advertising/04-develop.pl,
	share/advertising/09-MDKcampus_icon.png,
	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
	share/advertising/04-develop_icon.png,
	share/advertising/08-games_icon.png: changed icon sizes

2002/03/07  fcrozat

	* share/rpmsrate: Evolution is not dependent on GNOME selection (not
	require gnome-core)

2002/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: avoid destroying some files in /etc.

	* install_steps_interactive.pm: fixed package tree with a given medium.

	* any.pm: fix autologin sometimes activated without user intervention.

2002/03/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: generate_automatic_stage1_params: also save
	the interface number in case the machine will
	have several interfaces; clean code a bit

	* mdk-stage1/network.c: better error msg regarding pcmcia net
	adapters supported either with pcmcia.img
	or network.img (amaury sucks)

	* install_steps_auto_install.pm: in replay mode, since
	$o->{interactiveSteps}
	exists, we can't simply ||= @graphical_steps,
	we need to push to ensure that the
	@graphical_steps is always honoured

	* standalone/drakgw: 
	  - call net_monitor to disable internet
	connection before network-restart
	  - user return value when status'ing the
	  initscripts rather than grepping their
	  text output

	* modules.pm: try to avoid segfaulting probeall stuff
	add ns83820 gigabit (goes to other.img)

	* rescue/rescue-doc: english fixes thx to phil

2002/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* standalone/drakfont: Added a missing _( ) around a text

	* share/po/vi.po, share/po/cy.po, share/po/hu.po, share/po/id.po: updated
	po files

	* share/po/ko.po, share/po/ca.po, share/po/tr.po: commented out the
	translations using argument switching (not yet handled by DrakX)

	* bootlook.pm, standalone/drakboot: i18n changes

	* keyboard.pm: corrected the locale->keyboard list building
	make keyboard selection choose first the 5 first chars of lang;
	then the 2 first chars;

	* share/po/eu.po: commented out the translations using argument switching
	(not yet handled by DrakX)
	updated po file

2002/03/07  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix fileshare custom config
	fix *some* stew errors

	* bootloader.pm: "--timeout=" must be after terminal
	add --timeout=... for "terminal serial ..." line in grub's menu.lst
	fix *some* stew errors

	* install_any.pm: don't have the adsl & modem passwords in report.bug

	* detect_devices.pm (zips__faking_ide_scsi): fix returned value in
	standalone
	(getSCSI): don't call isFloppyOrHD for ZIPs (lowers the number of kernel
	error when there is no floppy)

	* fs.pm: removing quota choices for reiserfs

2002/03/07  Stew Benedict  <sbenedict@mandrakesoft.com>

	* any.pm, bootlook.pm, standalone/drakboot, bootloader.pm: drakboot
	functionality for PPC

2002/03/07  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed bug of network not being started by Printerdrake
	during installation.

2002/03/07  warly

	* share/compssUsers.server, share/compssUsers, share/rpmsrate: update
	server, merge with normal rpmsrate

2002/03/06  dam's  <damien@mandrakesoft.com>

	* standalone/drakautoinst: corrected HASH and ARRAY label

2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po, share/po/no.po, share/po/cy.po: updated po file

2002/03/06  Pixel  <pixel@mandrakesoft.com>

	* standalone/fileshareset (nfs_exports::update_server): ensure portmap is
	running

2002/03/06  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: corrected font stuff

	* standalone/drakautoinst: corrected HASH and ARRAY label

2002/03/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: no 3D with Utah GLX (XF 3.3) if more than 800 MB.

	* pkgs.pm: fixed error when using multiple removable media and user
	aborted installation
	(for some other error) and hdlists cannot be retrieved.
	add save of synthesis too when partitions are reformated, so that urpmi
	is happy after.
	fixed when hdlist gives no new package (new name) but only obsoleted
	package or
	updated package, ie security updates may appreciate.

	* install_any.pm: update for newer pkgs module (fix for abort during
	installation).

	* rescue/tree/etc/oem: allow oem script to be executable from standard cd
	set (powerpack or other).

2002/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po: updated po file
	updated pot file

	* share/po/fr.po, share/po/cy.po, share/po/id.po, share/po/zh_TW.po:
	updated pot file
	updated some po files

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

2002/03/06  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: add @preferred libxpm4

	* lang.pm: fix typo in %xim (for chineese)
	  - create the kde share/config's directory, so that kde config files
	are created in any case
	  - in user_only localedrake, ensure the /etc/sysconfig/i18n is taken
	into account when ~/.i18n doesn't exist (thanks to F.Crozat)

	* install_any.pm: ensure the fstab is kept on upgrade
	(g_auto_install): use "interactiveSteps" field instead of pushing in
	@install_steps_auto_install::graphical_steps

	* standalone/localedrake: when called by kcontrol with --apply, don't
	modify kde config files, kcontrol takes care of it more nicely

	* diskdrake/interactive.pm: translate the actions
	choose to activate crypto. type password. unselect encryption. Select
	encryption again, you were not asked for password. Fixed
	use formatError

	* bootloader.pm (add_append): don't add to entries of type 'other'

	* devices.pm (find_free_loop): fix

	* install_steps_interactive.pm, install_steps.pm: ensure the fstab is kept
	on upgrade

	* fsedit.pm: do not allow encrypted /var

2002/03/06  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* standalone/drakxtv: print an error message if xawtv isn't installed
	fix conflict between i18n and complete signal handler (ie return key
	and not value)

2002/03/06  warly

	* share/rpmsrate: remove abiword

2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pcmcia_/probe.c: an old sucking PCI card needs oldskool
	i82365 :-((, ugly patch

2002/03/05  warly

	* share/rpmsrate: add Fred Bastok modif
	remove too many duplicate in i18n packages that are now automatically
	added

2002/03/05  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* modules.pm: Add USB2 controller

2002/03/05  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: corrected expert option in install mode
	added expert mode

	* my_gtk.pm: greater interstice

	* modparm.pm: cosmetic
	gzipped modules handled

2002/03/05  fcrozat

	* share/rpmsrate: Install xlockmore when installing gnome, since
	xscreensaver can't lock
	root desktop..

2002/03/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: deactivate v4l module if DRI is enabled and r128
	driver used.

	* install_steps.pm: added auto restore of some files (/etc/profile) needed
	by upgrade (from .rpmnew).
	added log for hasNetwork (so that we can understand why installUpdates
	do nothing).

	* crypto.pm: avoid trying to find hdlist-updates.cz in existing medium
	(instead of ftp one).

	* fs.pm: fixed hd install to allow using specific directory.

	* install_any.pm: fix duplicate synthesis.hdlist.xxx file present in
	/var/lib/urpmi, and
	furthermore uncompressed :-(
	fixed possible bug when generating synthesis file for urpmi
	installation.

2002/03/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c, mdk-stage1/dhcp.h, mdk-stage1/network.c: save
	dhcp_hostname for stage2

	* install_any.pm: fix bug in generating automatic stage1
	params for http

	* modules.pm: aironet core sucking thing

2002/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sr.po, share/po/sp.po: updated po files

2002/03/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: if mem=nopentium is given on cmdline, have it after
	install

	* modules.pm (extract_modules): created (was done in load_raw)

2002/03/05  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator.pm: use UseFBDev for r128 - PPC

2002/03/05  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added support for HP's newest MF devices: HP OfficeJet
	D series, HP LaserJet 33xx MFP.
	Fixed bug of printerdrake sometimes assuming the user has an MF device
	when he has typed the device file name in the expert mode.

2002/03/05  yduret

	* bootlook.pm: fix nobody bug

	* standalone/logdrake: mail alert: use eval {} to catch wizcancel

2002/03/04  dam's  <damien@mandrakesoft.com>

	* modparm.pm: corected weirdness, I suck

2002/03/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fix scroll total to match reality.
	fixed interpretation of size of package when doing an install (this can
	be
	severe, need testing).

2002/03/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cy.po, share/po/id.po: updated po file

2002/03/03  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (gtkicons_labels_widget): since style is not set either, use
	the widget and ask it the style->font. This *works*
	(gtkicons_labels_widget): pass the style instead of directly passing the
	font

2002/03/03  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Let Star Office/OpenOffice.org configuration corrcet a bug
	in the PostScript produced by these programs so that the Euro symbol is
	printed correctly.

2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated po file

2002/03/02  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: better name for windobe new 0x42 special id (their
	own LVM marker)

	* detect_devices.pm: better jaz detection (thanks to Randy Welch)

2002/03/02  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".

2002/03/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po, share/po/da.po, share/po/vi.po, share/po/hu.po: updated
	po files

	* share/po/tr.po: updated po file

2002/03/02  Pixel  <pixel@mandrakesoft.com>

	* share/list: add lvreduce & lvextend

	* detect_devices.pm: fix ide zip name when there are already some other
	SCSI drives
	ZIPs and Jazz's are not floppies

	* diskdrake/interactive.pm (Resize): ensure we call lv_resize from lvm and
	adjust_* for normal partitions, even for destructive resizes

2002/03/02  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Replaced "Open Office" by "OpenOffice.org".

2002/03/01  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: fix gc's bulshit

2002/03/01  dam's  <damien@mandrakesoft.com>

	* services.pm: corrected translation used for shell command

	* my_gtk.pm: style & font correction

2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.

	* rescue/tree/etc/oem: added ext3 support.

	* share/rpmsrate.server: synced with rpmsrate INSTALL category.

	* install_any.pm: reset correct setup_postinstall_rpms calling.
	removed some card where 3D is not installed by default:
	Riva128, Radeon 8500 and Rage Mobility card.
	removed staling debug code.
	fixed bad copied package (if one is not found).

	* tools/oem-prepare: added handling of newer rpmsrate format with INSTALL
	category.

	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
	handling.
	only copy package in INSTALL category with a rate of at least 2.

2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: a few missing trads
	please translators, keep two newlines when
	there are two newlines in original string,
	it's on purpose

2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
	share/po/af.po: updated po files

	* share/po/fr.po: fixed two typos
	small corrections (non breakable spaces)

2002/03/01  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
	Xdrakres completly obsolete)

	* standalone/localedrake: restrict localedrake to installed lang

	* lang.pm: restrict localedrake to installed lang
	add 'C' in %charset2kde_font (so that english has normal fonts)

	* bootloader.pm: 
	  - do not indent "disk=... bios=..."
	  - $lilo->{first_hd_device} can be used to tell which drive is the
	first one
	for the BIOS. Useful when the bootloader is installed on a partition and
	not
	on the MBR.
	read "disk=/dev/xxx bios=0x8x" and save it

	* any.pm: restrict localedrake to installed lang
	ask which hard drive is the booting one when there is mixed kind of
	drives
	(scsi+ide, ide2+ide) and the bootloader is not installed on MBR

2002/03/01  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Reduced the paths to search for Star/Open Office, on systems
	without these applications installed the search needed a significant
	time.

2002/03/01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/rpmsrate: updated INSTALL category with NOCOPY new flag added.

	* share/rpmsrate.server: synced with rpmsrate INSTALL category.

	* install_any.pm: removed staling debug code.
	fixed bad copied package (if one is not found).

	* pkgs.pm: added pixel comments for handling INSTALL category and NOCOPY
	handling.
	only copy package in INSTALL category with a rate of at least 2.

2002/03/01  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c: add hostname/domain in dhcp negociation,
	thx to david@eastcott.net

	* share/po/fr.po: please translators, keep two newlines when
	there are two newlines in original string,
	it's on purpose

2002/03/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po, share/po/zh_TW.po, share/po/hu.po: updated po files

2002/03/01  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: handle leaving X for both Xdrakres and XFdrake (=>
	Xdrakres completly obsolete)

	* detect_devices.pm: add is_a_recent_computer()

	* any.pm: call dcop as user

	* lang.pm: add 'C' in %charset2kde_font (so that english has normal fonts)
	switch en_GB, *_CH, da, es@tradicional and wa to iso-8859-15

	* bootloader.pm: read "disk=/dev/xxx bios=0x8x" and save it

	* mouse.pm: special case for non detected usb interface on a box with no
	mouse.
	we *must* find out if there really is no usb, otherwise the box may
	not be accessible via the keyboard (if the keyboard is USB)
	the only way to know this is to make a full pci probe

2002/02/28  dam's  <damien@mandrakesoft.com>

	* standalone/drakbackup: bugfixs
	corrected translation for crontab

	* modparm.pm: corrected modinfo path for isa modules during install

2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: try to fix if no chosen width has been found.
	removed Radeon 8500 from DRI capable cards.

	* rescue/tree/etc/oem: added curl as a bonus for oem install (it will be
	used by urpmi)
	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
	not agree
	a lot).
	fixed bad copy of install packages.

	* tools/oem-prepare: added curl as a bonus for oem install (it will be
	used by urpmi)
	added a2ps as a bonus (it fetch tetex where oem limited disk usage do
	not agree
	a lot).
	fixed bad copy of INSTALL packages.

2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install2.pm: more precise msg when can't access kernel modules because
	we still have many dumb people on cooker asking what's going on

	* install_steps_interactive.pm: small english fix

2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/de.po, share/po/no.po: updated po files
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

	* share/po/sv.po: updated Swedish file
	updated pot file

2002/02/28  Pixel  <pixel@mandrakesoft.com>

	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
	"no" could be either "no-dvorak" or "no-latin1")

	* keyboard.pm (loadkeys_files): ensure each file appear only once

2002/02/28  siegel

	* share/po/de.po: and another part of updates
	updates

2002/02/28  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* share/po/fr.po: last translation but not least.
	further updates
	update french translation

2002/02/28  dam's  <damien@mandrakesoft.com>

	* share/themes-marble3d.rc: rechanged bg for camille

	* standalone/drakbackup: corrected translation for crontab

2002/02/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed bad copy of install packages.

	* tools/oem-prepare: fixed bad copy of INSTALL packages.

	* Xconfigurator.pm: removed Radeon 8500 from DRI capable cards.

2002/02/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/aliases, rescue/list: include /sbin/fsck.ext3 since our users are
	so dumb

2002/02/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/zh_TW.po: updated Chinese file

2002/02/28  Pixel  <pixel@mandrakesoft.com>

	* rescue/make_rescue_img: resolve conflicts for short keytable names (eg:
	"no" could be either "no-dvorak" or "no-latin1")

	* keyboard.pm (loadkeys_files): ensure each file appear only once

	* bootloader.pm: add "nowarn" in lilo.conf

	* install_steps.pm, fs.pm: use the "soft" option by default for /mnt/nfs
	and for "diskdrake --nfs"

2002/02/28  sdupont

	* standalone/drakfont: including 'su' mode on drakfont.

2002/02/28  siegel

	* share/po/de.po: updated missing strings

2002/02/28  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Re-activated function to specify a CUPS server in
	another network and to switch to manual CUPS configuration.
	  - Fixes/Improvements on Star Office/Open Office support:
	o When one switches the spooler, the entries of the printers under the
	     old spooler are removed from Star Office/Open Office
	   o Printers on remote CUPS servers (which are known through
	broadcasting)
	     can be added to Star Office/Open Office

	* share/rpmsrate.server, share/rpmsrate: Added "curl" to install section,
	it is needed by printerdrake.

	* printer.pm: 
	  - Fixes/Improvements on Star Office/Open Office support:
	o When one switches the spooler, the entries of the printers under the
	     old spooler are removed from Star Office/Open Office
	   o Printers on remote CUPS servers (which are known through
	broadcasting)
	     can be added to Star Office/Open Office

2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: updated Basque file

2002/02/27  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: 
	  - Improved fully automatic adding of printer queue:
	o Ask for a queue name if more than one printer is detected
	   o Let user confirm the model automatically chosen from the database
	   o Set correct paper size according to the language/country
	  - When one chooses a "CUPS + GIMP-Print" driver now all important
	options
	  are displayed directly (without needing "Advanced" button).
	  - Made less warning appearing on the console from where "printerdrake"
	was
	  called.

2002/02/27  fabman

	* share/po/es.po: converted to UTF-8

2002/02/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* crypto.pm: fix missing version listed when doing update.

2002/02/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: a few translations

	* mdk-stage1/rescue-gui.c, rescue/restore_ms_boot, rescue/list.i386,
	rescue/make_rescue_img: add "restore Windows Boot Loader" to rescue

	* install_steps_interactive.pm: formatAlaTex for congratz msg
	xfs + bootdisk = warning_msg

	* share/rpmsrate: flightgear is now fully lowercase
	glaxium

	* mdk-stage1/pcmcia_/probe.c: add Keld J�rn Simonsen <keld@dkuug.dk>'s O2
	Micro
	CardBus controller, and two other PCI entries which
	have close descriptions

	* mdk-stage1/pcmcia_/merge_from_pcitable: misc
	also report when pcitable is "too old"
	write a short perl program to easily merge new
	cardbus controllers from pcitable into probe.c

2002/02/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eu.po: updated po file

2002/02/27  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: simplify pyDict

	* install_steps_interactive.pm: ensure a keyboard is only once available,
	either in advanced or normal, but
	not in both (tx2fredl)

	* share/po/da.po: 
	  - it is UTF-8
	  - fix line splitting

	* lang.pm: workaround iso-8859-1 charset based languages not displayed
	correctly at install
	  - %lang2country is the authority, so if the country given by
	%lang2country doesn't exist in KDE, return C
	  - fix be,sp,sr
	  - s/def/default/ (typo)
	  - add some utf kde fonts

2002/02/27  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* share/po/fr.po: update french translation

	* standalone/drakxtv: 
	  - simplify an ACTION||fallback;fallback into ACTION;fallback
	  - print a message saying that xawtv can be used now at the end of the
	channels auto-probing in case of direct use from cl and not from
	  XawTV wrapper (from qa test) aka let the world be better :-)

	* share/po/br.po: minor update
	update brezhoneg translation

2002/02/26  dam's  <damien@mandrakesoft.com>

	* modparm.pm: corrected bad sprintf

2002/02/26  fabman

	* share/po/es.po: updated spanish translations

2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: version 8.2

2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po, share/po/sv.po, share/po/hu.po: updated po files

2002/02/26  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
	diskdrake/interactive.pm: propose some mount points for
	removable/nfs/smb

	* install_steps_interactive.pm: if no sound card are detected AND the user
	selected things needing a sound card, propose a special case for ISA
	cards

	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
	when asked for a ISA
	sound card)

	* my_gtk.pm (@icon_paths): ease testing

2002/02/26  siegel

	* share/po/de.po: updates

2002/02/26  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: corrected ttf/TTF and xfs restart

	* share/logo-mandrake.png: new logo

2002/02/26  fabman

	* share/po/es.po: updated spanish translations

2002/02/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fix translation of test program.

2002/02/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/libstdio/fclose.c: don't segfault when fclose(NULL)

	* share/po/fr.po: 
	  - explain where to put nbsp spaces, explain
	what's nbsp spaces, explain how to compose them
	  - add a few missing nbsp spaces
	  - translate a few more things

2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* any.pm: fixed English typo

2002/02/26  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm, diskdrake/removable.pm,
	diskdrake/interactive.pm: propose some mount points for
	removable/nfs/smb

	* Xconfigurator.pm: make perl_checker happy
	have "Ok  More  Show all" instead of "Ok  Cancel  Show all"
	set the locale properly instead of setting the translated messages in
	the script

	* any.pm: 
	  - zips() now return devices ending with "4", raw_zips() is the old
	zips()
	  - rdvd handling
	  - add .conf for /etc/devfs/conf.d/ files
	(devfssymlinkf): use /etc/devfs/conf.d/name.conf instead of putting the
	symlink in lib/dev-state

	* share/rpmsrate: add sndconfig in INSTALL (installed when user say Yes
	when asked for a ISA
	sound card)
	add xine in VIDEO 4

	* install_steps.pm: 
	  - zips() now return devices ending with "4", raw_zips() is the old
	zips()
	  - rdvd handling
	  - add .conf for /etc/devfs/conf.d/ files
	don't add mem=nopentium anymore. kernel people says it's not needed and
	bad
	for performance. It also means any bug must be addressed to them
	create /dev/dvd for DVDs

	* my_gtk.pm (@icon_paths): ease testing

	* lang.pm: create bindtextdomain which does only part of the load_mo job

	* install_steps_interactive.pm: if no sound card are detected AND the user
	selected things needing a sound card, propose a special case for ISA
	cards

	* detect_devices.pm: 
	  - zips() now return devices ending with "4", raw_zips() is the old
	zips()
	  - rdvd handling
	  - add .conf for /etc/devfs/conf.d/ files
	cleanup

	* fs.pm: 
	  - zips() now return devices ending with "4", raw_zips() is the old
	zips()
	  - rdvd handling
	  - add .conf for /etc/devfs/conf.d/ files

2002/02/26  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator_consts.pm: Ti Powerbook uses non-std 1152x768, rather than
	1152x864

2002/02/26  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* standalone/drakxtv: use "xvt -T" rather than "xvt --title": now not only
	we support rxvt
	and xterm but konsole too.
	the only one missing is gnome-terminal which has -t but not -T
	update comments
	  - remove useless "no_edit => 1"
	  - use interactive_gtk to determine if we're runned under X11 (ie
	authorized acces to X11 server, X11 context, ...)
	  - add a note to remember that we should add a method to detect if we
	  run under X11 if/when we implement interactive_qt
	  - simplify code :
		* remove is_tv and simplify its code to be a one-liner (replace a
		  foreach by a scalar context)
		* use format to prevent reverse lookup on scantv run thus
		  enabling to reverse the initial hash table
	  - all cases (newt, gtk, wt/wo xvt, ...) have been re tested on real
	hw.

2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated po file

2002/02/26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: remove passwords and realnames from report.bug

2002/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated po file

2002/02/26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: remove passwords and realnames from report.bug

2002/02/25  dam's  <damien@mandrakesoft.com>

	* any.pm, modparm.pm: corrected modules parameters functions

	* standalone/drakfont: debug

2002/02/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: fixes for cursor or
	nasty pixel displayed using syslinux-1.67-3mdk

2002/02/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: don't put accents for bootloader, we can just use 7bit
	chars
	(titi sucks bigtime)
	add a few nbsp spaces

	* rescue/list: add mt-st DAT stuff for joeghi (ghibo)

2002/02/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2002/02/25  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: ignore-table is a global flag, so put it there (when
	needed)

	* standalone/drakboot: add --testing

	* modules.pm, install_steps.pm, fs.pm, detect_devices.pm: use ide-scsi for
	ide zips

	* install_steps_interactive.pm: sort the list of keyboards

2002/02/25  Thierry Vignaud  <tvignaud@mandrakesoft.com

	* share/po/fr.po: fix a typo (thanks gc)

2002/02/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ru.po, share/po/sp.po, share/po/ca.po, share/po/th.po,
	share/po/uk.po, share/po/es.po, share/po/eo.po, share/po/ro.po,
	share/po/sv.po, share/po/sr.po, share/po/da.po, share/po/el.po,
	share/po/et.po, share/po/cs.po, share/po/tr.po, share/po/az.po,
	share/po/eu.po: updated some po files

2002/02/24  Pixel  <pixel@mandrakesoft.com>

	* share/keyboards.tar.bz2: fix permission

2002/02/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cy.po, share/po/Makefile: updated Welsh file

	* share/po/zh_CN.po, share/po/DrakX.pot, share/po/eu.po, share/po/vi.po,
	share/po/wa.po, share/po/zh_TW.po: udated Vietnamese file

	* install_steps_interactive.pm: removed useless _( ) around a string
	displayed in English only

	* share/po/be.po, share/po/bg.po, share/po/sk.po, share/po/ar.po,
	share/po/sl.po, share/po/br.po, share/po/bs.po, share/po/sv.po,
	share/po/af.po: updated some po files

2002/02/23  Pixel  <pixel@mandrakesoft.com>

	* interactive_newt.pm: 
	  - use simplify_string to ensure multi-line and too long strings are
	not used
	(hacky, but no other solution)
	  - set $::setstep like interactive_gtk is doing (??)

	* partition_table_empty.pm: handle MBR containing the same character (0 or
	"l")

	* diskdrake/interactive.pm: not_edit'able filesystem type (allow esp. a
	nicer newt version)

	* devices.pm (devices::make): following a good advice from Andrej
	Borsenkow, return the
	file even if the device file doesn't exist the caller will fail or not.
	The
	advantage is better compatibility than raising an exception
	devices::make doesn't mknod with devfs

	* detect_devices.pm: no need to catch the exception from devices::make
	anymore
	devices::make doesn't mknod with devfs

	* fs.pm: nicer error message when mount fails

	* share/rpmsrate: adding gphoto2

	* install_steps_interactive.pm: when passwords do not match, focus on
	first password entry, not the second (thanks to garrick)

	* Xconfigurator_consts.pm: remove Option "sw_cursor" for "SiS 6326" since
	it's already handled in Xconfigurator.pm

	* my_gtk.pm: fix @icon_paths to include /usr/share/libDrakX/pixmaps
	(thanks to garrick)

	* modules.pm: remove "-f" option for insmod

2002/02/23  siegel

	* share/po/de.po: fixed silly error
	updates

2002/02/23  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Added automatic configuration of printers
	in Star Office and Open Office.

2002/02/22  dam's  <damien@mandrakesoft.com>

	* share/advertising/02-internet.pl, share/advertising/07-server.pl,
	share/advertising/11-consul.pl, share/advertising/09-MDKcampus.pl,
	share/advertising/01-gnu.pl, share/advertising/13-Nvert.pl,
	share/advertising/06-user.pl, share/advertising/10-MDKexpert.pl,
	share/advertising/04-develop.pl, share/advertising/05-contcenter.pl,
	share/advertising/12-MDKstore.pl, share/advertising/03-graphic.pl,
	share/advertising/08-games.pl: corrected advertising text

	* share/po/fr.po: corrected bad translation

	* my_gtk.pm: corrected icon paths

2002/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: exit the pur_gtk version after launching the wizard
	version

	* any.pm: better rephrasing
	change name and description of security levels

	* share/rpmsrate: powermanga: 2 -> 3

2002/02/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po, share/po/DrakX.pot: updated Danish file

	* lang.pm: start of support of kde fonts
	fixed some keyboard names

	* keyboard.pm: fixed some keyboard names
	added the two ?win_toggle choices
	some info useful for keyboard handling

	* share/keyboards.tar.bz2: fixed some keyboard names

	* share/po/hu.po: updated hungarian file

2002/02/22  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: even smarted process to kill selection

	* lang.pm: fix 2 entries in charset2kde_font
	  - remove non needed entries in lang2country
	  - fix syntax errors
	  - rename kdefont in charset2kde_font
	  - much cleanup
	use invalid instead of unknown for errors when checking
	put back the less deep langs
	have the tree less deep (esp. nicer when not displaying UTF-8 entries)
	not translating in console installs (esp. newt) when the font is missing
	restrict the langs displayed to non utf8 during install
	fix warning message
	disable perl warnings when checking
	make perl_checker happy

	* devices.pm: add atibm (thanks to Robin Pollard)

	* bootloader.pm: put ignore-table to disable lilo's partition table
	checking
	(esp. the checking of the CHS geometry vs linear geometry)

	* Xconfigurator_consts.pm: fix syntax typo

	* Makefile: 
	  - exclude urpm from perl_checker
	  - add checking keyboard.pm

	* install_steps_interactive.pm, install2.pm, install_steps.pm: not
	translating in console installs (esp. newt) when the font is missing

	* keyboard.pm: use invalid instead of unknown for errors when checking
	change the message
	disable perl warnings when checking
	  - add checks for the various data structures
	  - fix another typo for usb2drakxkbd
	fix typo

	* share/rpmsrate: add procmail in SYSTEM 4
	add samba-doc samba-winbind samba-swat

	* Xconfigurator.pm: workaround set_active failing

	* any.pm: use the setupBootloader help instead of setupBootloaderGeneral
	restrict the langs displayed to non utf8 during install

2002/02/22  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* standalone/drakxtv: update TODO list;
	explain what is HRC

	* share/po/fr.po: further translations
	update french translation

2002/02/21  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: corrected icon list

2002/02/21  fabman

	* share/po/es.po: updated spanish po file

2002/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: spacecup no more exists
	armagetron is nice, no use to install gltron as well
	autoconf2.5 and automake1.5

	* interactive.pm: when not in X and needs su, use consolehelper now
	use consolehelper when no "kdeinit: kwin" process
	is running

2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/02/21  Pixel  <pixel@mandrakesoft.com>

	* lvm.pm, install_any.pm: ensure lvm tools don't need to be all installed
	at the same time

	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
	getFile'd (cuz they are big, causing the .cz2 to be *big*)

	* share/rpmsrate: add kinput2-wnn4

2002/02/21  siegel

	* share/po/de.po: update

2002/02/21  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Removed "Manual configuration" button when "Local
	Printer" dialog is started from the queue modification menu (Recommended
	mode).
	Improved matching of printer names resulting from auto-detection with
	names in the database.

2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: final batch of typos fixes (next time, please run a
	check speller)
	fix more typos
	update french translation;
	fix typos

	* diskdrake/interactive.pm: shorter displayed message

2002/02/21  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: changed button label

	* standalone/icons/gmon.png, standalone/icons/categ.png,
	standalone/icons/verti.png, standalone/icons/drakbackup.540x57.png,
	standalone/icons/net_c.png, standalone/icons/ic82-system-40.png,
	standalone/icons/wiz_drakgw.png, standalone/icons/ic-drakfont-48.png,
	standalone/icons/ic82-back-up-16.png,
	standalone/icons/wiz_scannerdrake.png,
	standalone/icons/ic82-discdurwhat-40.png,
	standalone/icons/ic82-tape-40.png, standalone/icons/ic82-network-40.png,
	standalone/icons/smbnfs_default.png, standalone/icons/smbnfs_server.png,
	standalone/icons/hori.png, standalone/icons/wiz_draknet.png,
	standalone/icons/smbnfs_mounted.png, standalone/icons/wiz_firewall.png,
	standalone/icons/wiz_default_up.png,
	standalone/icons/ic82-back-up-32.png, standalone/icons/ic82-CD-40.png,
	standalone/icons/ic82-systemeplus-40.png,
	standalone/icons/ic82-back-up-48.png,
	standalone/icons/ic82-dossier-32.png, standalone/icons/net_d.png,
	standalone/icons/ic82-moreoption-40.png,
	standalone/icons/smbnfs_has_mntpoint.png, standalone/icons/tradi.png,
	standalone/icons/wiz_printerdrake.png,
	standalone/icons/wiz_default_left.png,
	standalone/icons/eth_card_mini2.png, standalone/icons/net_u.png,
	standalone/icons/ic82-users-40.png, standalone/icons/mdk_logo.png,
	standalone/icons/ic82-others-40.png, standalone/icons/ic82-when-40.png,
	standalone/icons/draknet_step.png, standalone/icons/drakfont.620x57.png,
	standalone/icons/ic82-where-40.png: added new gfx only standalone

	* pixmaps/categ.png, pixmaps/verti.png, pixmaps/ic82-moreoption-40.png,
	pixmaps/ic82-system-40.png, pixmaps/net_c.png,
	pixmaps/ic-drakfont-48.png, pixmaps/ic82-CD-40.png,
	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
	pixmaps/draknet_step.png, pixmaps/ic82-dossier-32.png,
	pixmaps/ic82-back-up-48.png, pixmaps/smbnfs_server.png,
	pixmaps/ic82-discdurwhat-40.png, pixmaps/smbnfs_default.png,
	pixmaps/gmon.png, pixmaps/drakbackup.540x57.png,
	pixmaps/smbnfs_mounted.png, pixmaps/wiz_printerdrake.png,
	pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
	pixmaps/drakfont.620x57.png, pixmaps/ic82-tape-40.png,
	pixmaps/wiz_draknet.png, pixmaps/net_d.png,
	pixmaps/ic82-systemeplus-40.png, pixmaps/wiz_drakgw.png,
	pixmaps/mdk_logo.png, pixmaps/ic82-users-40.png,
	pixmaps/ic82-back-up-16.png, pixmaps/hori.png, pixmaps/tradi.png,
	pixmaps/smbnfs_has_mntpoint.png, pixmaps/eth_card_mini2.png,
	pixmaps/wiz_firewall.png, pixmaps/net_u.png, pixmaps/ic82-where-40.png,
	pixmaps/ic82-others-40.png, pixmaps/ic82-network-40.png,
	pixmaps/wiz_scannerdrake.png: removed gfx not used during install

2002/02/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* crypto.pm: fixed another not seen 8.1 reference in label.
	fixed 8.1 release hard coded.

2002/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fi.po: updated pot file
	updated Finnish file

	* help.pm: updated help file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/Makefile, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/02/21  Pixel  <pixel@mandrakesoft.com>

	* share/themes/blueHeart-button4.png, share/themes-DarkMarble.rc,
	install_gtk.pm, share/themes/DarkMarble-button3_out.png,
	share/themes.rc, share/themes/blueHeart-brown_bg1.png,
	share/themes/DarkMarble-button3_in.png, share/themes-blueHeart.rc,
	share/themes/DarkMarble-check_on.png,
	share/themes/blueHeart-button1.png,
	share/themes/DarkMarble-check_off.png,
	share/themes/blueHeart-button2.png, share/themes/DarkMarble-gloom2.png,
	share/themes/DarkMarble-button3_in_prelight.png,
	share/themes/DarkMarble-button3_out_prelight.png: remove DarkMarble and
	blueHeart themes

	* bootloader.pm: have devfs=nomount for failsafe

	* Makefile.config, share/po/Makefile: make a difference between PMS and
	ALLPMS. For install, only use PMS

	* lvm.pm: ensure lvm tools don't need to be all installed at the same time

	* Makefile: template.in stuff removed
	make a difference between PMS and ALLPMS. For install, only use PMS

	* pkgs.pm: smarter choosing of processes to kill

	* tools/i386/netboot/make_boot_network: cleanup

	* modules.pm: add aic7xxx_old

	* install_any.pm: ensure lvm tools don't need to be all installed at the
	same time
	(remove_bigseldom_used): remove xf86Wacom.so & mkfs.xfs
	DarkMarble theme is removed
	(kdeicons_postinstall): remove this obsolete code
	no special case for installing imwheel

	* lang.pm, tools/make_mdkinst_stage2: LC_COLLATE and LC_CTYPE are
	getFile'd (cuz they are big, causing the .cz2 to be *big*)

	* network/smbnfs.pm, network/nfs.pm: nicer conditional displaying of nfs
	comment

2002/02/21  siegel

	* share/po/de.po: update
	snapshot

2002/02/21  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added "type => 'list'" to the printer modification
	menu, it appeared as a drop-down list during the installation.

2002/02/21  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* standalone/drakxtv: more translatable strings;
	hide scantv output on console;
	check that we're under X11 before running scantv in an xterm

2002/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/doc/UPDATEMODULES: add an example on modules with options
	first line comment no more necessary
	s/row/column/, silly me

	* standalone.pm: explanations stuff: no reason to use "updated" at a place
	when we
	use "modified" at the rest of the locations..

2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/es.po: updated Spanish file
	updated Spanish file

2002/02/20  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (ejectCdrom): display "files still open:" for all
	processes when umounting fail

	* pkgs.pm: much simpler & stronger killing of still running processes

	* mouse.pm: USB|Generic is 3 button mice, add a USB 2 Button entry

2002/02/20  dam's  <damien@mandrakesoft.com>

	* share/themes-marble3d.rc: updated theme

	* network/adsl.pm: mgmt install corrected

2002/02/20  daouda

	* share/rpmsrate: 
	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
	NETWORKING_REMOTE_ACCESS_SERVER

2002/02/20  fcrozat

	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla

2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem, tools/oem-prepare: synced with newer rpmsrate of
	DrakX and newer method to select INSTALL packages.

	* standalone/XFdrake: fixed NVIDIA package in urpmi db by directly using
	urpm library instead of
	parsing (now removed) depslist.ordered file.

	* Xconfigurator.pm: fixed default value if selecting a card (use previous
	one or existing one).
	added XFree 4 driver choice if Other|Unlisted is chosen.
	fixed cancel on card selection so that previous choice is not lost.

	* Xconfigurator_consts.pm: added @allbutfbdrivers and @alldrivers for
	listing XFree 4 drivers.

2002/02/20  gbeauchesne

	* share/rpmsrate: 
	  - Add gcc3.0-c++ and libstdc++3.0-devel
	  - Prefer gcc3.0-java over gcc-java
	  - Remove BasiliskII-sheepnet since it does no longer exist
	  - Add/prefer BasiliskII-jit over BasiliskII

2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po: updated FRench file

	* share/po/es.po: updated Spanish file
	updated Spanish file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/02/20  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: fix s/SILO/LILO/

	* fsedit.pm: have "with /usr" translated

	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
	button

	* steps.pm: move installUpdates after configureX (workaround for bad
	timeouts during installing updates)

	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
	reading of previous security level

2002/02/20  siegel

	* share/po/de.po: update

2002/02/20  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: update french translations

2002/02/20  dam's  <damien@mandrakesoft.com>

	* share/advertising/13-Nvert.pl: changed toll free

	* my_gtk.pm: added mcc kill if wait message

	* standalone/logdrake: cosmetic change, mcc compliance

2002/02/20  daouda

	* share/rpmsrate: 
	  - same weight for rfbdrake in NETWORKING_REMOTE_ACCESS
	NETWORKING_REMOTE_ACCESS_SERVER

2002/02/20  fcrozat

	* share/rpmsrate: Remove mozilla-psm from list, it is merged in mozilla

2002/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm, install_any.pm: fixed INSTALL category in rpmsrate for copying
	file when changing cd (was an
	limitation in read_rpmsrate when a package having a category and INSTALL
	caused
	INSTALL to be dropped).

2002/02/20  gbeauchesne

	* share/rpmsrate: 
	  - Add gcc3.0-c++ and libstdc++3.0-devel
	  - Prefer gcc3.0-java over gcc-java
	  - Remove BasiliskII-sheepnet since it does no longer exist
	  - Add/prefer BasiliskII-jit over BasiliskII

2002/02/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/advertising/07-server.pl, share/advertising/01-gnu.pl: Improved
	English strings

	* share/po/hu.po, share/po/es.po, share/po/ar.po: updated Hungarian and
	Spanish files

2002/02/20  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: remove fsck_option (obsolete)

	* share/po/fr.po: fix s/SILO/LILO/

	* fsedit.pm: have "with /usr" translated

	* install_steps_interactive.pm (loadSavePackagesOnFloppy): add a "Cancel"
	button

	* steps.pm: move installUpdates after configureX (workaround for bad
	timeouts during installing updates)

	* install_steps.pm, any.pm, standalone/draksec: factorize and update the
	reading of previous security level

2002/02/20  siegel

	* share/po/de.po: snapshot

2002/02/19  dam's  <damien@mandrakesoft.com>

	* share/advertising/Makefile: new Makefile to install ads

2002/02/19  fcrozat

	* share/rpmsrate: 
	  -Install gnome-vfs-extras when installing nautilus (to get samba
	browsing)
	  -don't install nautilus-mozilla, it is pulled by nautilus

2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* any.pm: english fix

2002/02/19  Pixel  <pixel@mandrakesoft.com>

	* share/advertising/Makefile: advertising installation cleanup

	* diskdrake/smbnfs_gtk.pm: ugly hack to fix die

2002/02/19  siegel

	* share/po/de.po: updates for beta 3

2002/02/19  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
	dialog.

2002/02/19  dam's  <damien@mandrakesoft.com>

	* share/advertising/Makefile: new Makefile to install ads

2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
	$prefix in front of /var/* when missing
	since we give "lilo.conf" in drakbug_report, let's also
	give "menu.lst"

2002/02/19  Pixel  <pixel@mandrakesoft.com>

	* share/advertising/Makefile: advertising installation cleanup

2002/02/19  siegel

	* share/po/de.po: updates for beta 3

2002/02/19  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
	dialog.

2002/02/19  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: setting help

	* share/advertising/10-MDKexpert.png, share/advertising/07-server.png,
	share/advertising/05-contcenter.png, share/advertising/03-graphic.png,
	share/advertising/12-MDKstore_icon.png,
	share/advertising/06-user_icon.png,
	share/advertising/04-develop_icon.png,
	share/advertising/12-MDKstore.png, share/advertising/00-thanks.png,
	share/advertising/06-user.png, share/advertising/02-internet_icon.png,
	share/advertising/04-develop.png,
	share/advertising/05-contcenter_icon.png,
	share/advertising/10-MDKexpert_icon.png, share/advertising/13-Nvert.png,
	share/advertising/11-consul.png, share/advertising/03-graphic_icon.png,
	share/advertising/02-internet.png, share/advertising/07-server_icon.png,
	share/advertising/01-gnu.png, share/advertising/08-games.png,
	share/advertising/09-MDKcampus.png,
	share/advertising/09-MDKcampus_icon.png,
	share/advertising/08-games_icon.png: re-adding with -kb
	removing for re-adding with -kb
	added advertising for translation

	* share/advertising/essi.p: blah
	added advertising for translation

	* my_gtk.pm: new icon handler

	* Makefile.config: addde share/advertising/*.pl for translation

	* share/advertising/Makefile: new Makefile to install ads

	* share/advertising/00-thanks.pl, share/advertising/06-user.pl,
	share/advertising/08-games.pl, share/advertising/list,
	share/advertising/09-MDKcampus.pl, share/advertising/01-gnu.pl,
	share/advertising/11-consul.pl, share/advertising/13-Nvert.pl,
	share/advertising/02-internet.pl, share/advertising/07-server.pl,
	share/advertising/10-MDKexpert.pl, share/advertising/04-develop.pl,
	share/advertising/05-contcenter.pl, share/advertising/12-MDKstore.pl,
	share/advertising/03-graphic.pl: added advertising for translation

2002/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* any.pm: report_bug: find syslog in /var/log if it's not in /tmp, add
	$prefix in front of /var/* when missing
	since we give "lilo.conf" in drakbug_report, let's also
	give "menu.lst"

2002/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po, share/po/hu.po: updated Vietnamese and Hungarian files

2002/02/19  Pixel  <pixel@mandrakesoft.com>

	* share/advertising/Makefile: advertising installation cleanup

	* install2.pm: anchor the -IP match at the end of the string
	move loading /tmp/network from stage1 before doing the auto_install
	stuff to
	allow the -IP feature on auto_install file name

	* share/rpmsrate: add grub in 4 SYSTEM

2002/02/19  Till Kamppeter <till@mandrakesoft.com>

	* standalone/printerdrake, printer.pm: Assured that the default page size
	is "Letter" for US/Canada and "A4" for the rest of the world.
	The "Description" field of a printer queue is filled in with printer
	manufacturer and model by default.
	Removed unused varaiables in /usr/sbin/printerdrake.

	* printerdrake.pm: Changed button texts of "Do you want to auto-detect?"
	dialog.
	Assured that the default page size is "Letter" for US/Canada and "A4"
	for the rest of the world.
	The "Description" field of a printer queue is filled in with printer
	manufacturer and model by default.
	Removed unused varaiables in /usr/sbin/printerdrake.

	* install_steps_interactive.pm: Replaced "a4" and "letter" by "A4" and
	"Letter" so that Foomatic recognizes
	the paper sizes.
	Also use "Letter" paper for "en_CA" and "fr_CA" locales.

2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: when no net device found, print a msg to tell
	that now most pcmcia network adapters are supported
	with network.img

2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help file

	* share/po/sp.po, share/po/zh_CN.po, share/po/DrakX.pot, share/po/th.po,
	share/po/es.po, share/po/fr.po, share/po/sr.po, share/po/de.po,
	share/po/sk.po, share/po/tr.po, share/po/eu.po, share/po/sl.po,
	share/po/vi.po, share/po/uk.po, share/po/wa.po, share/po/sv.po,
	share/po/zh_TW.po, share/po/it.po: updated pot file

2002/02/18  Pixel  <pixel@mandrakesoft.com>

	* lang.pm, standalone/localedrake: 
	  - handle --kde_lang with optionally --kde_country
	  - handle --apply

	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"

2002/02/18  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: new gfx

2002/02/18  fcrozat

	* share/rpmsrate: Install Guppi when installing gnumeric

2002/02/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: titi sucks again

2002/02/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sk.po: updated Slovak ile
	updated pot file

	* help.pm: updated help file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
	updated pot file

2002/02/18  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm: 
	  - remove media_type cdrom-burner, use {capacity} instead
	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}

	* diskdrake/smbnfs_gtk.pm: 
	  - add Cancel
	  - move "click here" in "Search servers" on the right side
	  - remove Export
	  - fix bug

	* share/rpmsrate: raise xsane in SCANNER (Yves Duret)
	raise mkisofs & cdrecord in BURNER

	* Xconfigurator.pm: workaround not having the right to connect to our new
	created test server.
	info about the pb (sorry for the french):
	quand on lance le serveur
	  - via xdm/kdm/startx, ca utilise xauth, xhost est ferm�
	  - via X/xinit, xhost est ouvert sur localhost, xauth n'est pas utilis�
	  *sauf* si X/xinit est lanc� � partir d'un X *et* .Xauthority est non
	vide.
	    dans ce cas, xhost est ferm�, et aucun xauth n'est ajout�
	    une cons�quence, c'est que XFdrake ne peut pas acc�der au X de
	    test si XFdrake est lanc� sous X ou "xauth list" est non vide
	      exception: quand on lance le xdm/kdm en root, xhost n'est pas
	ferm�,
	         pas contre il est ferm� en root & startx.

	* any.pm (fileshare_config): rework the custom message and launch
	userdrake
	(report_bug): add lilo.conf

	* standalone/localedrake: 
	  - handle --kde_lang with optionally --kde_country
	  - handle --apply
	change the message & ask wether to logout or not

	* lang.pm: 
	  - handle --kde_lang with optionally --kde_country
	  - handle --apply
	(lang2kde_lang): add missing valid_kde_langs
	fuzzy language finding between available langs when it doesn't match
	(useful for upgrades where fr_FR was fr_FR@euro)

	* diskdrake/interactive.pm: remove cdrom-burner from media_type set

	* install_steps_gtk.pm: s/hbox/vbox for "Select Install Class"

	* fs.pm (mount_options_unpack): add usrquota and grpquota for
	ext2/ext3/reiserfs/xfs
	  - remove media_type cdrom-burner, use {capacity} instead
	  - use /proc/sys/dev/cdrom/info to fill in the {capacity}

	* share/compssUsers: add EDITORS in Development/Development
	add EDITORS in Development/Development

2002/02/18  yduret

	* bootlook.pm: remove aurora part (commented for the moment)

	* standalone/scannerdrake: HP OfficeJet support
	scsi/parport preliminary support

	* scanner.pm: update
	scsi parport preliminary support
	no more show unsupported scanner
	common output for ScannerDB update from sane *.desc files and from
	usbtable

2002/02/17  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/interactive.pm: warn_if_renumbered now also done at install

2002/02/17  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: have icewm-light in any case (to be used as a failsafe
	window manager)
	add hotplug, usbutils and usbview with the new flag USB

	* install_any.pm: hotplug now handled via rpmsrate and the USB flag
	add some log to know why umounting /tmp/image fail

	* diskdrake/interactive.pm: warn_if_renumbered now also done at install
	force scalar context for warp_text

	* share/po/id.xsl, share/po/help_xml2pm.pl: use xsltproc as a filter to
	remove entities

	* share/po/Makefile (clean): remove .memdump

	* any.pm (autologin): do not allow empty user name since no autologin can
	already be achieved by choosing "No"

	* install2.pm: do not use run_program::xxx, use directly "system" so that
	stdout is kept unchanged during "postInstall" execution

	* network/smb.pm: fix typo (s/nfs/smbfs/)

2002/02/17  siegel

	* help.pm: new version for 8.2

	* share/po/de.po: new german version

	* share/po/help_xml2pm.pl: added check for missing xsltproc
	fix perl warnings after adding -w

	* share/po/.cvsignore: added .memdump

	* share/po/Makefile: allow me to work with a symlink to doc in this
	directory

2002/02/16  Pixel  <pixel@mandrakesoft.com>

	* lvm.pm: 
	  - LVs "device" field were containing "/dev/vg/number" whereas it must
	be "vg/name"
	  - added lv_resize

	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM

	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)

2002/02/16  Pixel  <pixel@mandrakesoft.com>

	* Xconfig.pm: 
	  - prefer XKB available from existing XF86Config over
	/etc/sysconfig/keyboard KEYTABLE
	  - fix translating from /etc/sysconfig/keyboard KEYTABLE to XKB

	* diskdrake/interactive.pm: add Resize'ing mounted XFS on LVM

	* interactive_newt.pm: do not trash error messages if testing

	* lang.pm (country2lang): created
	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
	directory doesn't exist)
	(list): return the languages in a "specific" order (favours non utf8
	over utf8)

	* crypto.pm (mirrors): add a timeout via "alarm" (needs testing)

	* install_steps_interactive.pm (setupSCSI): when "clicked", ask "Do you
	have any SCSI interfaces" instead
	of assuming there is a SCSI interface and asking the driver name

	* lvm.pm: 
	  - LVs "device" field were containing "/dev/vg/number" whereas it must
	be "vg/name"
	  - added lv_resize
	  - call pvcreate with "-y -ff"
	  - created LVs are notFormatted

	* interactive.pm: 
	  - fix non X + testing + su
	  - since "interactive" takes care of "format" for type "combo", remove
	"format" (so that interactive_newt which switch to type "list" don't
	apply
	"format" once again)

	* standalone/localedrake: handle --kde_country=<country>

2002/02/16  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (country2lang): created
	(write): ensure it doesn't fail when kdeglobals is not writable (eg: the
	directory doesn't exist)
	(list): return the languages in a "specific" order (favours non utf8
	over utf8)
	fix call to update_gnomekderc

	* standalone/localedrake: handle --kde_country=<country>

2002/02/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

	* share/po/sk.po, share/po/cs.po, share/po/es.po: updated Czech, Spanish
	and Slovak files

2002/02/16  Pixel  <pixel@mandrakesoft.com>

	* lang.pm: fix call to update_gnomekderc
	remove unused & unneeded special %lang2kde_lang
	  - add lang::check
	  - fix utf-ko -> utf_ko
	  - fix utf-14 -> utf_14
	  - modify share/config/kdeglobals
	  - add charset2kde_charset, lang2country, lang2kde_lang

2002/02/15  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: embedded mode correction

	* my_gtk.pm: highlight in gtk icon widget

	* share/themes/mdk-check_on.png, share/themes/mdk-toggle_off.png,
	share/themes/mdk-toggle_on.png, share/themes/mdk-check_off.png: new gfx

	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
	share/step-orange-on.xpm, share/step-green-on.xpm,
	share/step-red-click.xpm: new gfx
	new gfx

2002/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po, share/po/fi.po, share/po/DrakX.pot, share/po/fr.po,
	share/po/wa.po, share/po/da.po, share/po/cs.po, share/po/hu.po,
	share/po/eu.po: updated Basque file; fixed a msgid change

	* share/po/sv.po: updated Swedish file
	updated Basque file; fixed a msgid change

2002/02/15  Pixel  <pixel@mandrakesoft.com>

	* run_program.pm: remove assigning STDIN to /dev/null since:
	  - programs should not use STDIN
	  - the "postInstall" script for auto_install's is more happy still
	having the STDIN.

	* diskdrake/smbnfs_gtk.pm, pixmaps/smbnfs_has_mntpoint.png,
	pixmaps/smbnfs_default.png, pixmaps/smbnfs_mounted.png,
	pixmaps/smbnfs_server.png: add icons showing if a mount-point is
	associated or if the share is mounted

	* pkgs.pm: fix typo

	* diskdrake/interactive.pm: use the new warp_text

	* install_steps.pm: use lang::charset2kde_charset

	* standalone/localedrake: lang::write doesn't need the filename anymore

	* any.pm: use 'combo' instead of 'type' for bootloader choice and security
	choice
	(requested by fredb&dadou)

	* interactive_gtk.pm: force scalar for Gtk::Label->new with warp_text

	* interactive.pm: favour "combo" over "list" in any case

	* Makefile (check): add lang::check checking

2002/02/15  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: update translation

2002/02/14  Pixel  <pixel@mandrakesoft.com>

	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs

	* network/smb.pm, network/smbnfs.pm, network/nfs.pm: cleaner & OOed code,
	with more code sharing

	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
	feature

	* my_gtk.pm (ctree_set_icon): new function

	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
	mount-point is associated are coming

	* standalone/diskdrake: fix expert and testing options handling

2002/02/14  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: embedded mode
	drakfont embedde mode

	* share/step-red-on.xpm, share/step-red.xpm, share/step-orange.xpm,
	share/step-orange-on.xpm, share/step-orange-click.xpm,
	share/step-green-click.xpm, share/step-red-click.xpm,
	share/step-green-on.xpm: new gfx

2002/02/14  erwan

	* tools/i386/netboot/ni5010/pxegrub, tools/i386/netboot/epic100/stage1,
	tools/i386/netboot/epic100/stage2, tools/i386/netboot/3c90x/pxegrub,
	tools/i386/netboot/rtl8139/pxegrub, tools/i386/netboot/ni5210/nbgrub,
	tools/i386/netboot/otulip/stage1, tools/i386/netboot/otulip/stage2,
	tools/i386/netboot/exos205/nbgrub, tools/i386/netboot/eepro/stage1,
	tools/i386/netboot/eepro/stage2, tools/i386/netboot/3c529/nbgrub,
	tools/i386/netboot/smc9000/pxegrub, tools/i386/netboot/ne2100/stage1,
	tools/i386/netboot/ne2100/stage2, tools/i386/netboot/exos205/pxegrub,
	tools/i386/netboot/sis900/nbgrub, tools/i386/netboot/ne/stage1,
	tools/i386/netboot/ne/stage2, tools/i386/netboot/tulip/nbgrub,
	tools/i386/netboot/sk_g16/nbgrub, tools/i386/netboot/eepro100/pxegrub,
	tools/i386/netboot/tiara/nbgrub, tools/i386/netboot/rtl8139/stage1,
	tools/i386/netboot/rtl8139/stage2, tools/i386/netboot/tiara/pxegrub,
	tools/i386/netboot/lance/nbgrub, tools/i386/netboot/depca/nbgrub,
	tools/i386/netboot/ni6510/stage1, tools/i386/netboot/3c90x/nbgrub,
	tools/i386/netboot/ni6510/stage2, tools/i386/netboot/smc9000/stage1,
	tools/i386/netboot/smc9000/stage2, tools/i386/netboot/3c509/pxegrub,
	tools/i386/netboot/3c509/stage1, tools/i386/netboot/3c509/stage2,
	tools/i386/netboot/sis900/pxegrub, tools/i386/netboot/ne2100/pxegrub,
	tools/i386/netboot/3c595/nbgrub, tools/i386/netboot/eepro/pxegrub,
	tools/i386/netboot/wd/nbgrub, tools/i386/netboot/ns8390/nbgrub,
	tools/i386/netboot/ni5210/stage1, tools/i386/netboot/ni5010/nbgrub,
	tools/i386/netboot/ni5210/stage2, tools/i386/netboot/exos205/stage1,
	tools/i386/netboot/exos205/stage2, tools/i386/netboot/eepro100/nbgrub,
	tools/i386/netboot/3c529/stage1, tools/i386/netboot/3c529/stage2,
	tools/i386/netboot/sis900/stage1, tools/i386/netboot/tulip/stage1,
	tools/i386/netboot/sis900/stage2, tools/i386/netboot/tulip/stage2,
	tools/i386/netboot/sk_g16/stage1, tools/i386/netboot/w89c840/nbgrub,
	tools/i386/netboot/sk_g16/stage2, tools/i386/netboot/tiara/stage1,
	tools/i386/netboot/tiara/stage2, tools/i386/netboot/depca/stage1,
	tools/i386/netboot/lance/stage1, tools/i386/netboot/3c90x/stage1,
	tools/i386/netboot/depca/stage2, tools/i386/netboot/lance/stage2,
	tools/i386/netboot/3c90x/stage2, tools/i386/netboot/otulip/pxegrub,
	tools/i386/netboot/tulip/pxegrub, tools/i386/netboot/epic100/nbgrub,
	tools/i386/netboot/3c595/stage1, tools/i386/netboot/ni5210/pxegrub,
	tools/i386/netboot/3c595/stage2, tools/i386/netboot/w89c840/pxegrub,
	tools/i386/netboot/wd/stage1, tools/i386/netboot/wd/pxegrub,
	tools/i386/netboot/wd/stage2, tools/i386/netboot/otulip/nbgrub,
	tools/i386/netboot/ns8390/stage1, tools/i386/netboot/eepro/nbgrub,
	tools/i386/netboot/ni5010/stage1, tools/i386/netboot/ns8390/stage2,
	tools/i386/netboot/ni5010/stage2, tools/i386/netboot/ne2100/nbgrub,
	tools/i386/netboot/ni6510/pxegrub, tools/i386/netboot/eepro100/stage1,
	tools/i386/netboot/eepro100/stage2, tools/i386/netboot/ne/nbgrub,
	tools/i386/netboot/depca/pxegrub, tools/i386/netboot/ne/pxegrub,
	tools/i386/netboot/w89c840/stage1, tools/i386/netboot/rtl8139/nbgrub,
	tools/i386/netboot/w89c840/stage2, tools/i386/netboot/sk_g16/pxegrub,
	tools/i386/netboot/lance/pxegrub, tools/i386/netboot/ni6510/nbgrub,
	tools/i386/netboot/smc9000/nbgrub, tools/i386/netboot/3c529/pxegrub,
	tools/i386/netboot/3c595/pxegrub, tools/i386/netboot/ns8390/pxegrub,
	tools/i386/netboot/epic100/pxegrub, tools/i386/netboot/3c509/nbgrub: New
	version of grub (0.91) with allstage and pxegrub

	* tools/i386/netboot/3c507/pxegrub, tools/i386/netboot/3c507/stage1,
	tools/i386/netboot/3c507/stage2, tools/i386/netboot/3c503/nbgrub,
	tools/i386/netboot/3c503/pxegrub, tools/i386/netboot/3c507/nbgrub,
	tools/i386/netboot/3c503/stage1, tools/i386/netboot/3c503/stage2:
	Fixning some file missing in netboot

2002/02/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed obsoletes management according to urpmi code.

2002/02/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ga.po, share/po/cy.po, share/po/is.po, share/po/ar.po,
	share/po/sl.po, share/po/ro.po: Instead of temporary removingfiles from
	CVS put a rule in Makefile to
	don't use them (thanks Thierry)
	updated some po files; removed the ones too lowly translated for the 8.2

	* share/po/pt_BR.po: updted Brazilian file
	updated some po files; removed the ones too lowly translated for the 8.2

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po,
	share/po/ru.po, share/po/hr.po, share/po/ko.po, share/po/nl.po,
	share/po/ja.po, share/po/sv.po, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/bs.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated some po files; removed the ones
	too lowly translated for the 8.2

	* share/po/vi.po: updated Vietnamese file
	updated some po files; removed the ones too lowly translated for the 8.2

	* share/po/Makefile: Instead of temporary removingfiles from CVS put a
	rule in Makefile to
	don't use them (thanks Thierry)

2002/02/14  Pixel  <pixel@mandrakesoft.com>

	* standalone/lsnetdrake: adapt to the neater network::smb and network::nfs

	* network/smbnfs.pm, network/smb.pm, network/nfs.pm: cleaner & OOed code,
	with more code sharing

	* interactive.pm: if testing, don't use kdesu

	* install_steps.pm: gzip report.bug

	* interactive_gtk.pm, diskdrake/interactive.pm: use the new warp_text
	feature

	* standalone/diskdrake: fix expert and testing options handling

	* my_gtk.pm (ctree_set_icon): new function

	* c/stuff.xs.pm: undef'ing some macros used by 2 independent sources et
	still needed :-(
	#include iconv.h is needed even when C_RPM is undefined

	* diskdrake/smbnfs_gtk.pm: some cleanup, icons showing wether a
	mount-point is associated are coming

2002/02/14  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/br.po: update
	convert to utf-8

	* standalone/drakxtv: uses xawtv internal strings instead of frequencies
	tables ids as values
	in %freqtables in order to enhance drakxtv robustness when
	translators'll
	arrive. thus we'll pass right strings to scantv instead of translated
	ones
	explain how we manage the "all frequencies" case
	display sorted tv norms

2002/02/13  erwan

	* tools/i386/netboot/device.map, tools/i386/netboot/makeImages: Adding
	missing file on netboot

	* tools/i386/netboot/make_boot_network, tools/i386/netboot/grub: updating
	grub in netboot

2002/02/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: avoid generating headers for copying file in
	postinstall-rpm directory.
	make sure not to crash if a package that should have been in CD1 is
	somewhere
	else.
	fixed stupid typo.
	removed all @needToCopy... variables and now use INSTALL category in
	rpmsrate.

	* share/rpmsrate: updated INSTALL category with the merge of DrakX
	obsoleted list (it will use
	INSTALL now :-)

	* pkgs.pm: added extension to setSelectedFromCompssList.

	* share/rpmsrate.server: synced INSTALL category with standard rpmsrate.

2002/02/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Danish and Hungarian files

	* share/po/da.po: updated Danish file
	updated Danish and Hungarian files

2002/02/13  Pixel  <pixel@mandrakesoft.com>

	* network/nfs.pm: $server->{ip} is no more mandatory

	* network/smb.pm: don't show shares ending with "$"
	$server->{ip} is no more mandatory

	* any.pm (setupBootloader): switch from "list" to "combo"

	* fs.pm (fstab_to_string): unsetting mount points in standalone will now
	work
	  - handle WORM type in /proc/scsi/scsi
	  - added media_type cdrom-burner
	  - adapting to new media_type
	  - nicer fd&hd testing

	* diskdrake/smbnfs_gtk.pm: have the fstab entries shown by default

	* detect_devices.pm, diskdrake/interactive.pm: 
	  - handle WORM type in /proc/scsi/scsi
	  - added media_type cdrom-burner
	  - adapting to new media_type
	  - nicer fd&hd testing

2002/02/13  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: When one visited the help page of a remote CUPS printer
	afterwards the full
	printer modification menu was shown, not only the one for remote CUPS
	printers. This is fixed now.

2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po, share/po/DrakX.pot: updated Czech and Walloon files

	* share/po/cs.po: updated Czech file
	updated Czech and Walloon files

2002/02/12  Pixel  <pixel@mandrakesoft.com>

	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/

2002/02/12  Till Kamppeter <till@mandrakesoft.com>

	* detect_devices.pm: In the USB auto-detection checked whether and where
	the device node was
	created.

2002/02/12  dam's  <damien@mandrakesoft.com>

	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
	share/themes/mdk-check_on.png, share/step-green-click.xpm,
	share/step-green.xpm, share/step-red-click.xpm,
	share/themes/mdk-check_off.png: new gfx

	* standalone/drakbackup, network/network.pm: bug correction

2002/02/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Hungarian file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/02/12  Pixel  <pixel@mandrakesoft.com>

	* devices.pm: i prefer /(.*?)(\d+)$/ to /(.*\D)(\d+)$/

	* docs/README.pxe: cleanup the .cfg

	* share/rpmsrate: 
	  - move bootsplash from SYSTEM to X
	  - lower Aurora

2002/02/12  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed:
	  - Endless loop when entering printerdrake during installation in
	recommended
	mode without local printer
	  - Printerdrake was not closed when one was in the "Add Printer"
	sequence
	  during installation and one clicked another installation item (entries
	  on left hand side)
	  - When configuring printing only after installation Printerdrake tried
	to
	  check the installed queues without Foomatic being installed (bug was
	  already in 8.1, but noone discovered it).
	  - CUPS died when one tried to add a (local) printer in recommended
	mode
	  after installation.
	  - Improved text for the dialog telling that no local printer was
	detected.
	  - The list of auto-detected printers appeared as drop-down menu and
	not as
	  a list.

	* detect_devices.pm: In the USB auto-detection checked whether and where
	the device node was
	created.
	Fixes on device auto-detection:
	  - Made USB printer auto-detection routine in "detect_devices.pm"
	creating
	the appropriate device nodes (needed for USB printers being recognized
	  during installation).
	  - Fixed "devices.pm" to be able to handle device files with numbers
	geater
	  than 9 (ex: /dev/usb/lp10).

	* standalone/printerdrake: 
	  - Assure that Foomatic is installed before checking existing printer
	queues.

	* devices.pm: Fixes on device auto-detection:
	  - Made USB printer auto-detection routine in "detect_devices.pm"
	creating
	the appropriate device nodes (needed for USB printers being recognized
	  during installation).
	  - Fixed "devices.pm" to be able to handle device files with numbers
	geater
	  than 9 (ex: /dev/usb/lp10).

	* printer.pm: Added forgotten '$prefix'es.
	Fixed:
	  - Endless loop when entering printerdrake during installation in
	recommended
	mode without local printer
	  - Printerdrake was not closed when one was in the "Add Printer"
	sequence
	  during installation and one clicked another installation item (entries
	  on left hand side)
	  - When configuring printing only after installation Printerdrake tried
	to
	  check the installed queues without Foomatic being installed (bug was
	  already in 8.1, but noone discovered it).
	  - CUPS died when one tried to add a (local) printer in recommended
	mode
	  after installation.
	  - Improved text for the dialog telling that no local printer was
	detected.
	  - The list of auto-detected printers appeared as drop-down menu and
	not as
	  a list.

2002/02/11  dam's  <damien@mandrakesoft.com>

	* share/list: added modinfo

	* network/netconnect.pm: added cancel for first step

2002/02/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: fixed syntax error...

	* Xconfigurator.pm: avoid testing fbdev driver.

	* install_steps.pm: added Aurora or bootsplash for getting a need on frame
	buffer.
	added fbdev for GeForce Integrated.

2002/02/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po, share/po/vi.po, share/po/hu.po: updated Danish,
	Hungarian and Vietnamese files

2002/02/11  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: booh, fpons was faster than me on "bootsplash wanting
	fb". Keeping my solution ;p

	* c/stuff.xs.pm: "standard_charset" and "iconv" are needed even when C_RPM
	is undefined

	* any.pm: allow to edit the initrd field (thx to randy.k.wilson)

	* install_any.pm (@needToCopy): add "ntp"

2002/02/11  warly

	* share/rpmsrate: remove dev from INSTALL, the sun is rising, and there
	are no more needs to have ppp in the INSTALL section, as the darkness is
	going away...

2002/02/10  Pixel  <pixel@mandrakesoft.com>

	* any.pm: in case there is both ata66 (hde) and ata33 hard drives, go to
	expert
	questions directly (it would need a semi_auto asking on which drive the
	bios
	boots...)

2002/02/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

2002/02/09  daouda

	* share/rpmsrate: 
	  - add rfbdrake to NETWORKING_REMOTE_ACCESS and
	NETWORKING_REMOTE_ACCESS_SERVER

2002/02/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help.pm file

	* share/po/fi.po, share/po/DrakX.pot, share/po/help_xml2pm.pl,
	share/po/es.po, share/po/fr.po, share/po/sv.po, share/po/da.po,
	share/po/de.po, share/po/hu.po, share/po/it.po, share/po/eu.po: merged
	with the manual help

2002/02/09  warly

	* share/rpmsrate: add ppp in INSTALL
	add dev in INSTALL

2002/02/08  dam's  <damien@mandrakesoft.com>

	* pixmaps/wiz_drakgw.png, pixmaps/wiz_default_up.png,
	pixmaps/wiz_firewall.png, pixmaps/wiz_draknet.png: new gfx

	* network/network.pm: corrected wireless modules

2002/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/locales-skeleton.tar.bz2: Added choice of charset for
	various languages

2002/02/08  Pixel  <pixel@mandrakesoft.com>

	* docs/SHORTCUTS: add F1 & F2

2002/02/08  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added instructions for scanning on HP's MF devices to
	the printer help page.
	HP PhotoSmart printers do not scan, so do not show how to scan with
	them.
	Do not let dialogs of network configuration correction appear embedded
	in the "Add printer" wizard.
	Completed wizard mode for adding a printer in both recommended and
	expert mode.

	* printer.pm: Enabled transferring queues of HP multi-function devices
	between spoolers.
	CUPS 1.1.13 dies on SIGHUP, do normal restart instead.
	Completed wizard mode for adding a printer in both recommended and
	expert mode.

2002/02/08  warly

	* share/rpmsrate: add bootsplash in system 4

2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/02/07  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm: fix error causing a bad window sizing when there is
	a horiz scroll

2002/02/07  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: fixed shadow when testing X

2002/02/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/help_xml2pm.pl: fixed email address

2002/02/07  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/smbnfs_gtk.pm: 
	  - don't pop the "do you want to install samba?"
	  - rwindow is not a window when embedded, so set_default_size only if
	possible

	* my_gtk.pm: make perl_checker happy
	ensure no more than one child is in the Plug

	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)

	* interactive_gtk.pm: fix error causing a bad window sizing when there is
	a horiz scroll
	(exit): ensure USR1 is sent to mcc

	* Xconfigurator.pm: allow to edit the hsyncrange and vsyncrange when
	choosing monitor "Custom"

	* install2.pm, install_steps.pm: create and use miscellaneousAfter (so
	that SECURE_LEVEL is set *after* asking)

	* diskdrake/interactive.pm (Options): wrap the help text

	* standalone/diskdrake: handle --embedded xxx xxx

2002/02/07  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* standalone/drakxtv, Makefile.config: add drakxtv (scantv gui)

	* standalone/localedrake: fix pixel stuff: don't restart wm on cancel

2002/02/07  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: beta 2

	* printerdrake.pm: corrected wizard pb

	* my_gtk.pm: wizard fixes

2002/02/07  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (mount): precise the type when mounting in standalone (for smb,
	nfs would not need it)

	* diskdrake/smbnfs_gtk.pm: 
	  - don't pop the "do you want to install samba?"
	  - rwindow is not a window when embedded, so set_default_size only if
	possible

	* interactive.pm: fix (causing XFdrake to use a combo instead of a list)

	* my_gtk.pm: ensure no more than one child is in the Plug

	* standalone/diskdrake: handle --embedded xxx xxx

	* interactive_gtk.pm (exit): ensure USR1 is sent to mcc

2002/02/06  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: removed ugly pink and ugly left bar for wizard mode

2002/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem, tools/oem-prepare: better handling of group linked
	to hardware or options.

2002/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: have frozen-bubble in GAMES at level 4

2002/02/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po, share/po/fi.po, share/po/DrakX.pot: updated French file

2002/02/06  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Automatic configuration of the scanning part of HP's
	multi-function devices.

	* printerdrake.pm: Added some stuff for the Wizard mode.
	Automatic configuration of the scanning part of HP's multi-function
	devices.
	Updated automatic package installation in printerdrake, no "kups" and
	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
	"rpmsrate" and "rpmsrate.server" appropriately.

	* share/rpmsrate.server, share/rpmsrate: Added scanning packages to
	INSTALL section, for HP MF device installation by printerdrake.
	Updated automatic package installation in printerdrake, no "kups" and
	"qtcups" any more, but "gpr", "a2ps", and "hpoj", updated also
	"rpmsrate" and "rpmsrate.server" appropriately.

2002/02/05  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
	HP's multi-function devices.

2002/02/05  dam's  <damien@mandrakesoft.com>

	* standalone/logdrake: wizard updated
	correction for mcc.

2002/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/rpmsrate.server: synced with normal rpmsrate for Basque
	management.

	* install2.pm: auto_allocate for oem mode is not needed as oem script
	create all necessary partition.

	* install_any.pm: add support for Basque (no KDE).

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: newer syslinux 1.67.

	* share/rpmsrate: add support for Basque (no netscape in such case)

	* rescue/tree/etc/oem: select preferred kernel as kernel-\d.

	* install_steps.pm: fixed logic, when someone want /root/drakx,
	it has to check /root/drakx and not /root only.

2002/02/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/tree/sbin/modprobe: don't do insmod -f, it's not really necessary
	and it taints the kernel (pabo)

	* rescue/tree/etc/profile: use LD_LIBRARY_PATH in rescue so that PATH'ing
	in /mnt
	can really be used

2002/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/es.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2002/02/05  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"

	* Xconfigurator.pm: testFinalConfig now always returns true if test is
	skipped because of a bad_card (back to the old behaviour, this was no
	good (the aim is to enable changing the monitor when test is skipped))

	* share/po/fr.po: fix "Details" translated in "D�tails de la partition"
	but is used at different
	place where the meaning has nothing to do with "partitions"

2002/02/05  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Added automatic configuration of HPOJ for
	HP's multi-function devices.

2002/02/05  warly

	* share/compssUsers.server: remove non server group from rpmsrate.server
	add utilities group in compssUser.server
	(webmin,ssh-server,wizards,monitoring)

	* share/rpmsrate.server: begin rpmsrate.server cleaning

2002/02/05  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: fix "help lilo when there is hdd with no hdc drive"

	* Xconfigurator.pm: testFinalConfig now always returns true if test is
	skipped because of a bad_card (back to the old behaviour, this was no
	good (the aim is to enable changing the monitor when test is skipped))

2002/02/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: log the "chkconfig --del gpm" when there is a serial
	mouse

2002/02/04  dam's  <damien@mandrakesoft.com>

	* standalone/logdrake: corrected typo. Yvounet, check your code!!
	embedded, explain

	* my_gtk.pm: bug correction

	* standalone/drakfont, services.pm, network/netconnect.pm: applied cooker
	guy english review

2002/02/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added v4l module all the time (along with dbe already
	present).

2002/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps.pm: have numlock activated when isLaptop rather than
	$o->{pcmcia}

2002/02/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
	share/po/DrakX.pot, share/po/th.po, share/po/es.po, share/po/fr.po,
	share/po/sr.po, share/po/el.po, share/po/et.po, share/po/sk.po,
	share/po/tr.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
	share/po/uk.po, share/po/eo.po, share/po/nl.po, share/po/wa.po,
	share/po/sv.po, share/po/zh_TW.po: updated some po files

2002/02/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: fix creating /etc/security/msec/server

	* share/po/fr.po: fix "More" translation

2002/02/04  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Made HP multi-function devices configured
	with HPOJ being displayed correctly by printerdrake.

	* detect_devices.pm: Replace "Hewlett-Packard" by "HP" when HP device is
	detected on a parallel port.

2002/02/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: update french translations

2002/02/03  Pixel  <pixel@mandrakesoft.com>

	* any.pm: force a few more "list"s instead of "combo" boxes
	since "format" is now handled for combo boxes, combo boxes are used in
	much too many places. Fix this by forcing type "list" for some cases,
	and using type "list" when a ask_from has only one entry

	* interactive.pm: since "format" is now handled for combo boxes, combo
	boxes are used in much too many places. Fix this by forcing type "list"
	for some cases, and using type "list" when a ask_from has only one entry

	* bootloader.pm: 
	  - fix some vga text modes 80x30
	  - chmod 600 lilo.conf when a password is given
	  - fix general "append"
	(thanks to David Eastcott)
	"password" works without "restricted", not the other way round (reported
	by David Eastcott)
	fix typo

2002/02/03  warly

	* share/rpmsrate.server: synchronize with current cooker rpmsrate

2002/02/03  Pixel  <pixel@mandrakesoft.com>

	* any.pm: force a few more "list"s instead of "combo" boxes
	since "format" is now handled for combo boxes, combo boxes are used in
	much too many places. Fix this by forcing type "list" for some cases,
	and using type "list" when a ask_from has only one entry

	* interactive.pm: since "format" is now handled for combo boxes, combo
	boxes are used in much too many places. Fix this by forcing type "list"
	for some cases, and using type "list" when a ask_from has only one entry

	* bootloader.pm: fix typo
	help lilo when there is hdd with no hdc drive (needs testing!)

2002/02/03  warly

	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
	compssUsers.server

2002/02/03  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: help lilo when there is hdd with no hdc drive (needs
	testing!)

2002/02/03  warly

	* share/rpmsrate.server, share/compssUsers.server: add rpmsrate.server and
	compssUsers.server

2002/02/02  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: XFree is now 4.2

	* standalone/fileshareset: fix dropping samba sections which don't have
	any "path="

2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po, share/po/DrakX.pot: updated Swedish file

	* share/po/fr.po: merged again French file to recover some lost strings;
	and added non breakable spaces at all the needed places as required
	by French typography

2002/02/01  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm: please perl_checker

	* install_interactive.pm: use from_Mb for choosing the size of the windows
	partition

	* install_steps.pm: create symlink /etc/security/msec/server in security >
	3

2002/02/01  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: First steps of the implementation for the "Add printer"
	wizard.

	* detect_devices.pm: Made auto-detection working for HP DeskJet 840C on
	USB
	General improvements for reliability of USB printer auto-detection

2002/02/01  yduret

	* pixmaps/wiz_scannerdrake.png: readding it with -kb option (i am still
	jeune and boulet)
	rm for readding with -kb option (i am jeune and boulet)

	* standalone/logdrake: ergo fix thx dadou report
	fix --explain=foo bug that prevent to show anything

	* bootlook.pm: ergo fix thx dadou report...

2002/02/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* services.pm, standalone/drakbackup, printerdrake.pm,
	standalone/logdrake: changed some strings to make translation easier

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/no.po, share/po/fi.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/02/01  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm: please perl_checker

	* install_interactive.pm: use from_Mb for choosing the size of the windows
	partition

	* Xconfigurator.pm: testFinalConfig now returns false if test is skipped
	because of a bad_card or
	verybad_card and $skip_badcard is not set

2002/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/keyboards.tar.bz2, keyboard.pm: Added Tamil language and
	keyboard choices (KDE is translated to Tamil)

2002/01/31  yduret

	* pixmaps/wiz_scannerdrake.png: on rajoute la zolie image

2002/01/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* Xconfigurator.pm: Added setting of model=jp106 for Japanese keyboard

	* keyboard.pm, share/keyboards.tar.bz2: Added Bulgarian "phonetic"
	keyboard

	* lang.pm: Enabled "ms" language in the language selection list (there are
	Gnome and KDE
	translations for it)

	* share/po/be.po, share/po/zh_CN.po, share/po/no.po, share/po/fi.po,
	share/po/es.po, share/po/bg.po, share/po/de.po, share/po/et.po,
	share/po/el.po, share/po/ru.po, share/po/br.po, share/po/uk.po,
	share/po/eo.po, share/po/bs.po, share/po/nl.po, share/po/ro.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po:
	updated some po files

2002/01/30  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: add gnome-core in GNOME (used to be required?)

	* Xconfigurator_consts.pm, Xconfigurator.pm: move "what is the
	running_window_manager" and "ask_window_manager_to_logout" to any.pm

	* any.pm (ask_window_manager_to_logout, running_window_manager): created
	from Xconfigurator and cleaned
	(selectLanguage): if $langs is empty, don't ask for "other languages"

	* pixmaps/wiz_printerdrake.png: re-adding with -kb
	removing for re-adding with -kb

	* standalone/localedrake: now works in normal user: it modifies the
	~/.i18n (todo: handle kde crazy variables?)

	* lang.pm: handle read'ing and write'ing to a specified file (useful
	example: ~/.i18n)

2002/01/30  sdupont

	* standalone/drakbackup: complex merging....
	change /var/drakbackup to /var/lib/drakbackup
	crontab update
	mail report update
	sendmail update
	require rpm mode
	code optimisation
	remove about gi
	new help function

2002/01/29  Till Kamppeter <till@mandrakesoft.com>

	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
	printerdrake.

	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
	wizard.
	Improvements for the selection of a local printer, especially when no or
	one printer was detected.

2002/01/29  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: icons placements are better

2002/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakbug_report, standalone/drakautoinst, install2.pm,
	install_any.pm, install_steps.pm, log.pm, docs/README, pkgs.pm: move
	/root/* files (ddebug.log, install.log, report.bug,
	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
	and also save stage1.log there

	* partition_table_raw.pm: add new pixel-made grub signature

	* crypto.pm: update land2tzs accordingly to new url2land
	Add url2land entries for nl, it, at

	* any.pm: move /root/* files (ddebug.log, install.log, report.bug,
	auto_inst.cfg.pl, replay_install.img) to /root/drakx/,
	and also save stage1.log there
	rephrase a little bit highest level
	to not refer to "level 4" anymore
	use formatAlaTeX for describing security levels

	* install_steps_interactive.pm: fix thanks to chipaux msg about mkbootdisk

2002/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po, share/po/sv.po, share/po/hr.po, share/po/de.po,
	share/po/DrakX.pot, help.pm, share/po/it.po, share/po/eu.po,
	share/po/es.po: updated pot file with help messages from manual

2002/01/29  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm: handle "format" for combo's

	* bootloader.pm: use the new format for combo's to clean code handling
	{vga} field

	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory

	* any.pm: use the new format for combo's to clean code handling {vga}
	field
	handle the case where samba and/or nfs-utils are not installed

	* install_steps.pm: move the various bootloader::add_append's in
	setupBootloaderBefore

	* diskdrake/smbnfs_gtk.pm: handle the case where samba and/or nfs-utils
	are not installed

	* install_steps_interactive.pm: visually unselect X and docs when minimal
	install
	"With X" choice is now working
	handle "Cancel" on language selection

2002/01/29  Till Kamppeter <till@mandrakesoft.com>

	* pixmaps/wiz_printerdrake.png: Added logo for the "Add Printer" wizard of
	printerdrake.

	* printer.pm, printerdrake.pm: Prepared printerdrake for the "Add printer"
	wizard.
	Improvements for the selection of a local printer, especially when no or
	one printer was detected.

2002/01/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* interactive.pm: fix pixel's minimal example using interactive.

2002/01/29  yduret

	* docs/interactive/ask_from_list, docs/interactive/wait_message,
	docs/interactive/ask_from_treelist, docs/interactive/ask_from_listf,
	docs/interactive/ask_from: added some snipet coe for example

	* standalone/logdrake: logdrake is now under gi/perl-install/standalone

2002/01/29  Pixel  <pixel@mandrakesoft.com>

	* diskdrake/hd_gtk.pm: look diskdrake.rc in another directory

	* install_steps.pm: move the various bootloader::add_append's in
	setupBootloaderBefore

2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: do the few new translations

	* standalone.pm: try to reflect hierarchy for */*.pm

2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
	share/po/id.po: Corrected various English typos

2002/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: fix typo

	* partition_table.pm: warn if partitions have been renumbered due to a
	partition being added or removed

	* diskdrake/interactive.pm: don't warn_if_renumbered during install
	warn if partitions have been renumbered due to a partition being added
	or removed

2002/01/28  siegel

	* share/po/de.po: new german version

2002/01/28  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Replaced "sleep" commands by a subroutine which waits
	exactly until CUPS is ready.
	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
	is not "known" to it.

	* printer.pm: Removed debug helper line.
	Replaced "sleep" commands by a subroutine which waits exactly until CUPS
	is ready.
	CUPS >= 1.1.12 needs to "know" all devices, let CUPS restart if a device
	is not "known" to it.

2002/01/28  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/br.po: update brezhoneg translations

	* share/po/fr.po: more french translations

2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/zh_CN.po, share/po/no.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
	share/po/sk.po, crypto.pm, share/po/tr.po, share/po/eu.po,
	printerdrake.pm, standalone/draknet, share/po/vi.po, share/po/ko.po,
	share/po/uk.po, share/po/nl.po, share/po/bs.po, share/po/ja.po,
	standalone/drakbackup, share/po/wa.po, share/po/sv.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/hu.po, share/po/af.po,
	share/po/id.po: Corrected various English typos

2002/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: fix typo

	* diskdrake/interactive.pm, partition_table.pm: warn if partitions have
	been renumbered due to a partition being added or removed

2002/01/28  dam's  <damien@mandrakesoft.com>

	* network/tools.pm, network/netconnect.pm: debug network testing

2002/01/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated color of
	scroll bar and reduced its size.

	* bootloader.pm: fixed get_append if key=mem.
	timeout passed to 10 instead of 5.

2002/01/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: update games rates

2002/01/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (remove_advertising): ensure removing /tmp/drakx-images
	can't fail

	* any.pm: simpler&nicer solution for writing kppprc in utf8
	have kppprc strings in utf8

	* detect_devices.pm: remove test code

	* install_steps.pm, bootloader.pm: cleanup perImageAppend code (hopefully
	handling nicely the mem=nopentium case)

	* diskdrake/smbnfs_gtk.pm: don't use wait_message's when waiting (waiting
	is usually very short), use a waiting cursor instead.
	(the wait_message's were causing bad interactivity stuff)

2002/01/27  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm: add a minimal example

	* services.pm: 
	  - move the require on my_gtk to ask_standalone_gtk
	  - cleanup

	* Makefile.config: 
	  - adapt to new diskdrake modules
	  - add logdrake to STANDALONEPMS_

	* my_gtk.pm: strange protection against ensure_focus generating a "focus"
	event causing a
	dead-loop (reminder: ensure_focus helps ensuring a widget is focused)

	* Makefile.drakxtools, standalone.pm, Makefile, diskdrake_interactive.pm,
	install_interactive.pm, diskdrake.pm: 
	  - adapt to new diskdrake modules
	  - some cleanup in drakxtools build

	* diskdrake/removable.pm: remove debugging code
	new diskdrake modules (diskdrake_interactive is now
	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
	created from diskdrake.pm)

	* diskdrake/interactive.pm, diskdrake/hd_gtk.pm,
	diskdrake/removable_gtk.pm: new diskdrake modules (diskdrake_interactive
	is now diskdrake::interactive, diskdrake is now diskdrake::hd_gtk,
	others created from diskdrake.pm)

	* diskdrake/smbnfs_gtk.pm: fix updating the actions
	new diskdrake modules (diskdrake_interactive is now
	diskdrake::interactive, diskdrake is now diskdrake::hd_gtk, others
	created from diskdrake.pm)

	* network/nfs.pm: find_exports: add a timeout

	* fs.pm: new function fstab_to_string

	* standalone/diskdrake: handle --removable *and* --removable=<dev>
	handle --removable=<dev>
	  - new options --hd, --nfs, --smb, --removable
	  - adapt to new diskdrake modules
	  - save $all_hds->{current_fstab} to know if /etc/fstab must be saved

2002/01/25  fabman

	* share/po/es.po: updated spanish translation

2002/01/25  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: add devfsd

	* install_any.pm: remove_advertising: use rm_rf since we don't have the
	real list of files (the .pl's are not in @advertising_images)

	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'

2002/01/25  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Less important options only shown when
	"Advanced" button clicked.
	Handling of cursor position in the main window improved.
	Handling of empty printer queue list in main window improved.
	Removed line breaks from longer texts, so that text flows into window
	nicely
	Minor text improvements.

2002/01/25  dam's  <damien@mandrakesoft.com>

	* install_any.pm: advertising engine updated

	* share/logo-mandrake.png: beta logo

	* install_steps_gtk.pm: corrected decy
	advertising engine updated

2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: please find a better fix

2002/01/25  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
	linux
	fix spelling

	* Makefile: call clean-rpmsrate

	* mdk-stage1/pci-resource/update-pci-ids.pl: remove 'ncr53c8xx'

2002/01/25  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm, install_any.pm: advertising engine updated

	* share/po/fr.po: typo

	* share/logo-mandrake.png: beta logo

2002/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: please find a better fix

2002/01/25  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/Makefile: ensure errors propagate

	* bootloader.pm: prefer default linux-{smp,enterprise,secure} over simple
	linux
	fix spelling

	* Makefile: call clean-rpmsrate

	* mdk-stage1/pci-resource/Makefile: silly shell
	ensure errors propagate

2002/01/25  dam's  <damien@mandrakesoft.com>

	* share/po/fr.po: typo
	corrected too long label Mise � niveau deas paquetages seule. please
	find a better FIX

2002/01/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: cosmetic changes.

	* pkgs.pm: fixed try opening to trigger changeCD callback.

2002/01/24  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: 
	  - add msec in any install
	  - use BIGMEM flag for kernel-enterprise
	  - use SMP flag for kernel-smp
	(those 2 goes together with Warly's clean-rpmsrate)
	add flag DOCS which should work together with !excludedocs

	* any.pm: ensure grub is installed if grub is chosen

	* install_any.pm: 
	  - add DOCS (based on !excludedocs)
	  - set BIGMEM and SMP flags
	(since kernel-smp and kernel-enterprise sub-numbers are better handled
	by
	 rpmsrate together with Warly's clean-rpmsrate)

	* install_steps_interactive.pm, install2.pm: minimal install now handles
	excludedocs

	* install_steps.pm: log excludedocs
	minimal install now handles excludedocs
	put devfs=mount only if devfsd is installed

	* diskdrake_interactive.pm: truncate lvm name to 63 characters since
	longer vg names are not allowed

2002/01/24  Till Kamppeter <till@mandrakesoft.com>

	* detect_devices.pm, printer.pm, printerdrake.pm: Fixed bug of empty menu
	entry appearing after adding a new printer.
	Modified "Local Printer" dialog to be more newbie-friendly.

2002/01/23  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm: updated speedtouch code to use pppoa3

	* my_gtk.pm: removed font loading

2002/01/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: fixed to allow multiple mem=xxx parameter (especially
	mem=nopentium).

	* install_steps.pm: restored mem=nopentium.
	removed mem=nopentium.

2002/01/23  Pixel  <pixel@mandrakesoft.com>

	* standalone/fileshareset: name mangling max length set to 12
	use name mangling for samba labels

2002/01/23  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: New user interface in main window
	More printer info in printer modification window
	Better support for remote CUPS printers

2002/01/22  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: improved widget_icons

	* install_steps.pm: added net_cnx_pg output when configuring network in
	auto install

2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added support to save already existing synthesis file.

	* install_any.pm: changed code to build synthesis file, check if they have
	not already been copied
	from mirror, or build them using parsehdlist.

2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: Translate a few things more

2002/01/22  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: cleanup error messages (and fix diskdrake's)
	defaults to ext3 instead of ext2

	* interactive.pm: add "quit_if_double_click" and "tree_expanded" flags
	(request from till)
	add feature "allow_empty_list" for "list" entries (disables the special
	cases for 0 and 1 element lists)

	* install_any.pm, diskdrake.pm: cleanup error messages (and fix
	diskdrake's)

	* install_interactive.pm, raid.pm: defaults to ext3 instead of ext2

	* partition_table.pm: remove unused auto_win_extended stuff
	handle extended partitions with no partitions inside (esp. for the first
	hda5 & windows XP)

	* bootloader.pm: 
	  - fix default not being formatted like labels for lilo
	  - check the label is not already used *case-sensitively*
	  - check a kernel_or_dev is given

	* any.pm: 
	  - remove the default entry when that entry is removed
	  - use allow_empty_list for displaying the entries
	  - fix default not being formatted like labels for lilo
	  - check the label is not already used *case-sensitively*
	  - check a kernel_or_dev is given

	* fsedit.pm: yet again better error reporting
	defaults to ext3 instead of ext2

	* standalone/drakboot, bootlook.pm: fix yves's code duplication of
	lilo_choice (use $::lilo_choice in bootlook)

	* interactive_gtk.pm: add "quit_if_double_click" and "tree_expanded" flags
	(request from till)

	* install_steps_interactive.pm: cleanup error messages (and fix
	diskdrake's)
	better messages for the minimal installs

	* standalone/diskdrake: yet again better error reporting
	cleanup error messages (and fix diskdrake's)

	* share/rpmsrate: move mandrake-mime from SYSTEM to X
	lower sndconfig

2002/01/22  fcrozat

	* share/rpmsrate: Really install gnome control center when installing
	GNOME

2002/01/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added mem=nopentium for any Athlon or Duron processor.

2002/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* Makefile: exclude standalone from testing

	* share/po/fr.po: resolve small conflict

2002/01/22  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: add the new "mii" module to 'net_raw'

	* install_steps_interactive.pm: better messages for the minimal installs
	fix a few cancel's (reported by slegros)
	don't ask security level in non-expert

	* install_steps_gtk.pm, install_interactive.pm: fix a few cancel's
	(reported by slegros)

	* share/rpmsrate: move mandrake-mime from SYSTEM to X
	lower sndconfig

2002/01/21  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing

	* install_steps_interactive.pm, install2.pm: can't call
	any::config_libsafe so early during install, move it where msec is
	called

	* any.pm: quiet perl's warning

2002/01/21  dam's  <damien@mandrakesoft.com>

	* install_steps.pm: fixed network conf in auto install
	corrected network down

	* my_gtk.pm: removed debug print
	icons widget improvment : icon placment, highlighting

2002/01/21  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: increase the size of the "Choose action" box

	* diskdrake_interactive.pm: remove the "Active" partition feature

	* interactive_gtk.pm, my_gtk.pm: hopefully better dialog box sizing

	* install2.pm: can't call any::config_libsafe so early during install,
	move it where msec is called

	* install_steps_interactive.pm: can't call any::config_libsafe so early
	during install, move it where msec is called
	cleanup, update, enhance security level choice

	* standalone/draksec: cleanup, update, enhance security level choice

	* install_steps.pm: remove deprecated msec groups adding
	cleanup

	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: newer grub

	* any.pm: quiet perl's warning
	cleanup, update, enhance security level choice
	when creating users, add handling of xgrp/rpm/adm/wheel groups in high
	security
	fix advice about "usermod -G"

	* tools/i386/netboot/menu.lst.example: add gateway parameter

2002/01/21  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: new ugly icon

	* install_steps.pm: corrected network down

2002/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2002/01/21  Pixel  <pixel@mandrakesoft.com>

	* share/fonts.tar.bz2: add helvR12_iso15

	* install_steps_interactive.pm: """ When I choose a / partition smaller
	than 200 MB, the installation
	gives me an error message complaining that my system does not
	    have enough free space for the installation, although basesystem
	install
	    require less than 100 MB. """
	up to around 250MB, minimal install is chosen.
	questions are: base system only, or no X, or normal.

2002/01/21  siegel

	* share/po/de.po: updates

	* standalone/drakbackup: fixed i18n bugs

2002/01/20  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: call msec with run_commands=0 to fix the network reloading
	(causing various problems, esp. "Net::FTP: Timeout" at X config step)

2002/01/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakbackup: sorry, _("$_") is not allowed

2002/01/20  Pixel  <pixel@mandrakesoft.com>

	* share/po/fr.po: fix "`msgid' and `msgstr' entries do not both end with
	'\n'"

	* install2.pm: call msec with run_commands=0 to fix the network reloading
	(causing various problems, esp. "Net::FTP: Timeout" at X config step)

2002/01/20  yduret

	* timezone.pm: added Italy (time.ien.it) in

2002/01/19  Stew Benedict  <sbenedict@mandrakesoft.com>

	* standalone/drakbackup: Rework English syntax in drakbackup - hopefully
	I've got the intent correct ;^)

2002/01/19  Till Kamppeter <till@mandrakesoft.com>

	* detect_devices.pm: Replaced USB printer auto-detection by a more
	reliable method.

2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: changed Update -> Upgrade for installation
	class.

2002/01/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/draknet: 
	  - move 'use standalone' up to comply to 'explanations'
	  - fix an english typo, s/connexion/connection/

	* standalone/drakgw: 
	  - move 'use standalone' up to comply to 'explanations'
	  - write higher-level 'explanations'
	  - small fix, s/`ls ..`/glob(..)/

	* standalone/scannerdrake: 
	  - move 'use standalone' up to comply to 'explanations'
	  - fix a small english problem

	* share/po/fr.po: reduce a lot of fuzzy and untranslations
	large stuff from printerdrake, drakbackup and drakfont still to do :-)

	* c/stuff.xs.pm, standalone/printerdrake, standalone/net_monitor,
	standalone/drakautoinst, standalone/keyboarddrake,
	standalone/localedrake, standalone/livedrake, standalone/drakboot,
	standalone/draksec, standalone/tinyfirewall, standalone/mousedrake,
	standalone/drakxservices, standalone.pm, standalone/drakproxy,
	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
	standalone/drakxconf, log.pm, standalone/logdrake,
	standalone/drakbackup, standalone/drakfont: 
	  - write the 'common' part of the 'explanations' stuff,
	with nice help from Pixel for the tough Perl part
	  - move 'use standalone' up in all standalone apps,
	  to comply to 'explanations'

2002/01/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2,
	share/fonts.tar.bz2: changes to get in line with new XFree86

2002/01/18  Pixel  <pixel@mandrakesoft.com>

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
	locale on the box so that XI18N_OBJS's and common are included

2002/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: add update flag for urpmi medium.

	* install_steps_interactive.pm: even if user cancel update of package on
	tree, allow urpmi to install the medium.
	avoid downNetwork as no difference are made between ethernet or ppp.
	fixed typo.
	allow cancel when installUpdates.

	* crypto.pm: add update medium for crypto for urpmi (flag update).
	fixed typo.
	allow selection/deselection of update medium (for cancel of
	installation).

	* install_steps_gtk.pm: allow choosePackageTree to display a cancel if a
	specific medium has been given.

2002/01/18  Pixel  <pixel@mandrakesoft.com>

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: find the X11
	locale on the box so that XI18N_OBJS's and common are included

2002/01/18  sdupont

	* standalone/drakfont: update warning messages (qa).

	* standalone/drakbackup: fix traduction problems and more ...

2002/01/17  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
	allocate doesn't do anything

2002/01/17  dam's  <damien@mandrakesoft.com>

	* network/tools.pm, network/netconnect.pm: draknet : success message only
	if success

	* my_gtk.pm: added timeout for redrawing icon widget

2002/01/17  fcrozat

	* share/rpmsrate: kdebase-nsplugins will be installed by default when
	selecting KDE

2002/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: avoid upgrading a package by selection on files unless it has
	been obsoleted.

2002/01/17  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: check the mountpoint is valid for encrypting (disallow "/"
	and "/usr")

	* fsedit.pm, diskdrake_interactive.pm: better error message when auto
	allocate doesn't do anything
	check the mountpoint is valid for encrypting (disallow "/" and "/usr")

	* fs.pm: do not create /swap

	* services.pm: move service apcupsd from Printing to System

	* bootloader.pm: fix many disks bios remapping (esp. booting on scsi when
	ide is present)

2002/01/17  sdupont

	* standalone/drakbackup: stable version for qa pkg.
	(without unstables options)

2002/01/16  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix cancel on scsi module loading

2002/01/16  sdupont

	* standalone/drakbackup: update send mail.
	(pixel mode. ;))

2002/01/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps_interactive.pm: installUpdates: use formatAlaTeX

2002/01/16  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix cancel on scsi module loading

	* install_steps_interactive.pm: don't drop default_packages in "Base
	system only"

	* standalone/fileshareset: add locking to ensure things are in a proper
	state

2002/01/15  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: advertising engine amelioration

	* my_gtk.pm: automatic icon placement in icon_labels_widget

2002/01/15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: remove the test trick
	encrypted filesystem handling:
	  - using losetup
	  - add "Options" for partitions in diskdrake (expert mode)

	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
	diskdrake.pm: encrypted filesystem handling:
	  - using losetup
	  - add "Options" for partitions in diskdrake (expert mode)

2002/01/15  dam's  <damien@mandrakesoft.com>

	* network/isdn_consts.pm: updated

2002/01/15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: remove the test trick
	encrypted filesystem handling:
	  - using losetup
	  - add "Options" for partitions in diskdrake (expert mode)

	* c/stuff.xs.pm, fs.pm, share/list, fsedit.pm, devices.pm, install_any.pm,
	diskdrake.pm: encrypted filesystem handling:
	  - using losetup
	  - add "Options" for partitions in diskdrake (expert mode)

	* any.pm: have ddcxinfos take the best result of every run

2002/01/15  sdupont

	* standalone/drakfont: fix progress bar problem.
	some gi updates:
	  - windows font importation.
	 - advanced font importation.
	 - licence interface.
	 - ...

	* standalone/drakbackup: new ./drakbackup --show-conf
	fix daemon problem (media to use).
	update informations on drakbackup report mail.
	__ 3290 lines.
	man pages fr created.
	some code cleaning on backend mode. (all_user_list && return_path)
	new functions on backend mode:
		- show-conf
		- debug
	        - help
	        - version.

2002/01/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: 
	  - eata is SCSI adapter, not 'disk' adapter
	  - have eata module in boot floppies

	* mdk-stage1/pci-resource/update-pci-ids.pl: we need also "big" modules in
	pci ids

	* share/rpmsrate: have lbreakout weigthed 4 instead of 2

	* mdk-stage1/modules.c: suggest other.img in file-not-found-in-archive
	(sugg David Faure
	and Pixel)

2002/01/14  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: fix typo (making auto installs working again)

2002/01/13  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: s/lbreakout/lbreakout2/

	* install_steps_interactive.pm: cleanup

2002/01/13  sdupont

	* standalone/drakbackup: some updates ...
	in "more option" steps user could choose to receive a report by mail for
	each backups.
	ftp backup work.
	fix time problems.
	remove doc from file.
	security fix for configuration file.

2002/01/11  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: advertising engine works !
	champagne.
	still some display bugs, but they will be corrected later.
	need new ads and adequat description file
	new advertising engine

	* install_any.pm: modifications for new avertising engine

	* my_gtk.pm: new icons placement

2002/01/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/th.po, share/po/es.po, share/po/fr.po, share/po/sr.po,
	share/po/de.po, share/po/el.po, share/po/et.po, share/po/sk.po,
	share/po/tr.po, share/po/ar.po, share/po/az.po, share/po/eu.po,
	share/po/sl.po, share/po/vi.po, share/po/eo.po, share/po/wa.po,
	share/po/sv.po, share/po/zh_TW.po, share/po/Makefile, share/po/af.po,
	share/po/it.po: updated Spanish file; merged help-* files

2002/01/11  sdupont

	* standalone/drakbackup: update header pixmaps.
	correction of message problem.

	* pixmaps/drakfont.620x57.png, pixmaps/BDO-drakebackup1.png,
	pixmaps/drakbackup.540x57.png: update pixmaps for drakbakup & drakfont.

	* standalone/drakfont: update header pixmaps.

2002/01/10  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: domainname corection

	* network/network.pm: domainname corection
	corrected network domainname pb

	* install2.pm: corrected read_resolv => read_conf

2002/01/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: english taste inspired by daminette.

2002/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/lsparts: better looking output of type of partition (%x => %0x)

2002/01/09  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, standalone/net_monitor, standalone/draknet,
	network/network.pm, network/modem.pm, network/netconnect.pm: big merge
	from update 8.1 with cvs
	First part. Part 2 following

	* my_gtk.pm: added bold option in text creation. Some corrections

	* install_steps_interactive.pm: corrected fpons typo

2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed too many package selected for No X or With X
	option of minimal installation.

	* install_steps_interactive.pm: avoid asking for minimal install for
	upgrade.

	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
	for urpmi.

	* pkgs.pm: use rpm version comparison function.

	* c/stuff.xs.pm: added rpmvercmp.

2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed too many package selected for No X or With X
	option of minimal installation.

	* install_steps_interactive.pm: avoid asking for minimal install for
	upgrade.

	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
	for urpmi.

	* pkgs.pm: use rpm version comparison function.

	* c/stuff.xs.pm: added rpmvercmp.

2002/01/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed too many package selected for No X or With X
	option of minimal installation.

	* install_steps_interactive.pm: avoid asking for minimal install for
	upgrade.
	fixed stupid.

	* crypto.pm: fix incomplete prefix for update mirror when adding an entry
	for urpmi.

	* pkgs.pm: use rpm version comparison function.

	* c/stuff.xs.pm: added rpmvercmp.

2002/01/08  dam's  <damien@mandrakesoft.com>

	* install2.pm: cosmetik

2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: added eval around pixmap drawing for advertising.

2002/01/08  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakbackup: another round of bad use of _() fixes.
	fixed bad use of _().

2002/01/08  sdupont

	* standalone/drakbackup: drakbackup work ...
	incremental backup and restore work.

2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile: again fixed dam's sucking, please dam's check what you write
	before commiting.

	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
	correct code to change it to $_ only ?

2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile: again fixed dam's sucking, please dam's check what you write
	before commiting.

	* standalone/drakautoinst: removed stupid invocation of _("$_"), is it
	correct code to change it to $_ only ?

2002/01/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile: again fixed dam's sucking, please dam's check what you write
	before commiting.

2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* steps.pm: changed installUpdates after summary (to get corrected
	timezone).

	* install_any.pm: separated setDefaultPackages from setPackages because it
	is used by allowing
	only base system to be installed (allow remade a better package
	selection).

	* crypto.pm: added bestMirror method to retrieve a good mirror (according
	to timezone) and
	add salt with random number to avoid using always the same.

	* install2.pm: added option to only upgrade packages.

	* install_steps_interactive.pm: added minimal type of install support.

	* share/list: fixed to match newer menu package.

2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* steps.pm: changed installUpdates after summary (to get corrected
	timezone).

	* install_any.pm: separated setDefaultPackages from setPackages because it
	is used by allowing
	only base system to be installed (allow remade a better package
	selection).

	* crypto.pm: added bestMirror method to retrieve a good mirror (according
	to timezone) and
	add salt with random number to avoid using always the same.

	* install2.pm: added option to only upgrade packages.

	* install_steps_interactive.pm: added minimal type of install support.

	* share/list: fixed to match newer menu package.

2002/01/07  dam's  <damien@mandrakesoft.com>

	* Makefile: socmetic
	typo
	added debug mode for the whole install

	* my_gtk.pm: removed print
	new pack_start functions, powerpack sub added (code from adrien)
	incorporated adrien's code to generalize pack functions
	minor bug fixes

	* install_steps.pm, network/netconnect.pm: corrected network connection
	during install

	* install2: added debug mode for the whole install

2002/01/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* steps.pm: changed installUpdates after summary (to get corrected
	timezone).

	* install_any.pm: separated setDefaultPackages from setPackages because it
	is used by allowing
	only base system to be installed (allow remade a better package
	selection).

	* crypto.pm: added bestMirror method to retrieve a good mirror (according
	to timezone) and
	add salt with random number to avoid using always the same.

	* install2.pm: added option to only upgrade packages.

	* install_steps_interactive.pm: added minimal type of install support.

	* share/list: fixed to match newer menu package.

	* Makefile: fixed overwriting of install2 filtering, keep diagnostic and
	strict for debug mode.

2002/01/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: also log server name for HTTP install

2002/01/04  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, install_steps.pm, network/tools.pm, my_gtk.pm,
	network/netconnect.pm: corrected minor bugs in network (among others bug
	"modifying read only values")
	recode upNetwork and downNetwork (it might work, at least if you are
	lucky);

2002/01/04  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: corrected minor bugs in network (among others bug "modifying
	read only values")
	recode upNetwork and downNetwork (it might work, at least if you are
	lucky);
	corrected font display : no useless font->height, but ascent + descent
	updated

	* network/isdn_consts.pm: changed asus isdn hisax identify

	* network/adsl.pm, install_steps.pm, network/tools.pm,
	network/netconnect.pm: corrected minor bugs in network (among others bug
	"modifying read only values")
	recode upNetwork and downNetwork (it might work, at least if you are
	lucky);

2002/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* http.pm, install2.pm, steps.pm, install_any.pm: added update
	installation support to install (big modifs need testing).

	* pkgs.pm: allow to use same identifier for security medium (1u).
	re-install urpmi.
	allow some error to be catched.
	added update installation support to install (big modifs need testing).

	* crypto.pm: removed test code.
	allow to use same identifier for security medium (1u).
	re-install urpmi.
	allow some error to be catched.
	added update installation support to install (big modifs need testing).

	* install_steps_interactive.pm: removed obsoleted comment.
	allow to use same identifier for security medium (1u).
	re-install urpmi.
	allow some error to be catched.
	added update installation support to install (big modifs need testing).

	* install_steps_gtk.pm: fixed empty flat package selection when giving a
	limit to medium.
	added update installation support to install (big modifs need testing).

	* install_steps.pm: allow to use same identifier for security medium (1u).
	re-install urpmi.
	allow some error to be catched.
	fix for auto updates.
	added update installation support to install (big modifs need testing).

2002/01/04  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm: enable easy patch-adding of pcitable and usbtable
	entries

2002/01/03  dam's  <damien@mandrakesoft.com>

	* standalone/drakbackup: user can be equal to 500

2002/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: updated code to create synthesis file (including
	provides on files).

2002/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ar.po: updated Arabic file

2002/01/03  Pixel  <pixel@mandrakesoft.com>

	* install2.pm, Xconfig.pm: save the output of ddcxinfos before
	modprobe'ing i810fb, and use that output for Xconfig (when i810fb is
	modprobe'd, ddc probe doesn't work anymore)

	* install_steps_interactive.pm, install_steps_gtk.pm: fix english messages

	* share/rpmsrate: as asked by Vincent Danen, lower uucp and raise sudo

	* pkgs.pm: prefer gcc-cpp

	* interactive_gtk.pm, interactive.pm: toggle Advanced/Basic button

	* any.pm: fix english messages
	save the output of ddcxinfos before modprobe'ing i810fb, and use that
	output for Xconfig (when i810fb is modprobe'd, ddc probe doesn't work
	anymore)

2002/01/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: changed @euro locales to plain names; now old currencies ones
	are obsolete

2001/12/31  sdupont

	* standalone/drakfont: new fixed size and add a head pixmap (to update).

	* standalone/drakbackup: lots of update ...
	  - cron work.
	 - backup incremental & normal work.
	 - corrupted backup data files supported.
	 - error messages updated.
	 - aff list of backup data files pbs.
	 - test all backup files before to restore it.

2001/12/30  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
	root reserved part is 0% (and not 5%)

2001/12/30  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: format home directories with "-m 0" for ext2&ext3, so that the
	root reserved part is 0% (and not 5%)

2001/12/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectMouse): when selecting a usb mouse,
	call setup_thiskind with
	at_least_one=1 (so that pci_class probe is used and so unknown
	serial_usb
	recognised (cf ldetect))

	* modules.pm (load_thiskind): allow $probe_type to be given, allowing
	forced pci probe (unsafe)

	* any.pm (setup_thiskind_backend): when at_least_one==1, try load_thiskind
	forcing
	pci_class probe when no modules is found.

2001/12/28  sdupont

	* standalone/drakbackup: update select data on backup cd

2001/12/27  sdupont

	* standalone/drakbackup: fix of user selection during restore step.
			remove return_file_date.
			change algo for incremental backup.

2001/12/26  sdupont

	* standalone/drakbackup: some gi corrections & update.
	 incremental restore.

2001/12/22  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: s/use pkgs/require pkgs/ since pkgs::versionCompare is
	only used during install

	* my_gtk.pm: export gtkcolor (used in install_steps_gtk)
	make perl_checker happy

2001/12/22  sdupont

	* pixmaps/backup_bot.png, pixmaps/cdrom.png, pixmaps/backup_time.png,
	pixmaps/backup_bot2.png, pixmaps/backup_left.png, pixmaps/net.png,
	pixmaps/backup_hd.png, pixmaps/backup_title.png,
	pixmaps/backup_left2.png, pixmaps/filedialog.png, pixmaps/hd.png,
	pixmaps/backup_options.png, pixmaps/backup_net.png: remove old
	drakbackup pixmaps files.

	* pixmaps/ic82-back-up-16.png, pixmaps/ic82-discdurwhat-40.png,
	pixmaps/ic82-tape-40.png, pixmaps/ic82-moreoption-40.png,
	pixmaps/ic82-where-40.png, pixmaps/ic82-system-40.png,
	pixmaps/ic82-others-40.png, pixmaps/ic82-systemeplus-40.png,
	pixmaps/ic82-network-40.png, pixmaps/ic82-CD-40.png,
	pixmaps/ic82-when-40.png, pixmaps/ic82-back-up-32.png,
	pixmaps/ic82-users-40.png, pixmaps/ic82-dossier-32.png,
	pixmaps/ic82-back-up-48.png: drakbackup designer icons.

	* standalone/drakbackup: add pixmaps on backup step.
	new designer pixmaps on drakbackup.

2001/12/21  sdupont

	* standalone/drakbackup: some update in file name parsing...
	etc ...

	* pixmaps/BDO-drakebackup1.png: drakbackup

2001/12/20  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: API changed, so call changed

	* share/logo-mandrake.png: new ayo logo

2001/12/20  sdupont

	* standalone/drakbackup: update the todo header
	the REQUIRE header
	& code cleaning
	  - tar -cvf tarfilename --after-date="sept 1, 2000" /home
	   l.380 incremental: date -> if already exist do find -m ... | tar ...
	   non incremental: date + delete old before the backup
	  - correct detection of backups during restore.
	  - gi for other media during restore. hd-> ok
	  - backend for build backup update and support
	  incremental backups.
	  - real incremental backup
	update resore & help.

2001/12/19  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: update graphical backend

2001/12/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: add dl2k.o (nic module) per request of nplanel

2001/12/19  sdupont

	* standalone/drakbackup: 
	  - gi for other media during restore. hd-> ok
	  - backend for build backup update and support
	incremental backups.
	  - real incremental backup
	add other media source during restore.
	  - update help & license.
	  - code cleaning.
	  - ask during whqt sys step if user want to backup critical
	  files, like /etc/passwd /etc/group /etc/fstab
	  - use preserve permissions during tar
	  - begin of total backup step.( all partitions wanted, windows
	partitions for example!)
	  - remove replace mode (backup_*_version is enought)

2001/12/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: fixed dam's sucking (syntax error only, code is
	untested).

2001/12/18  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix typos

2001/12/18  sdupont

	* standalone/drakfont: include new pixmap on main menu.

	* standalone/drakbackup: sort lists in all lists selection.
			correct use of incremental backup
			parse of restore & system state.
	fix restore user selection problems
	fix build backup data selection problems
	ect ...
	drakbackup -> drakxtools.rpm

	* pixmaps/ic-drakfont-48.png: drakfont pixmap...

2001/12/18  yduret

	* standalone/logdrake: fix console mode : exit now

2001/12/18  Pixel  <pixel@mandrakesoft.com>

	* any.pm: fix typos

2001/12/17  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: power graphical backend update : text is now
	centered

	* my_gtk.pm: power graphical backend update : text is now centered
	updated new graphical backend

2001/12/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive_gtk.pm, standalone/drakgw: drakgw for gold

	* tools/pcmcia_config.patch: remove permanently (using
	patch_pcmcia_config.pl now)

2001/12/17  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
	tmpfs

2001/12/17  sdupont

	* standalone/drakbackup:
	________________________________________________________________
	DONE:
	incremental backups have depends whith replace options.
	     gtklist not maximized.
	     restore mode.
	     view date during restore
	     view size of file, date & hours during backup on CD
	________________________________________________________________

2001/12/17  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, any.pm, install2.pm, bootloader.pm: clean_tmp now means using
	tmpfs

2001/12/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: new picture for 8.2.

2001/12/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: change again way of selection
	PCI entries :
	what's in mar files --> what's given by modules (e.g. just
	as update_kernel does)

2001/12/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install2.pm: use "askdisplay" to ask a question at begining of install
	for what
	display you want to use during install

	* Makefile, tools/patch_pcmcia_config.pl: externalize patch_pcmcia_config
	(from make_boot_img)
	because we need it in perl-install/Makefile also

	* mdk-stage1/rescue-gui.c, rescue/make_rescue_img, rescue/rescue-doc,
	rescue/Makefile: have a bunch of Rescue documentation directly
	available from the Rescue-menu following suggestions
	by Denis among others

2001/12/12  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: enable easy screenshot'ing
	  - ensure /usr is formatted if / is
	  - remove /var/lib/rpm if /var is kept

	* common.pm, docs/README: enable easy screenshot'ing

2001/12/12  Stew Benedict  <sbenedict@mandrakesoft.com>

	* rescue/make_rescue_img: larger rescue image on PPC to accomodate huge
	xfs module

	* bootloader.pm: mods to address new yaboot's lack of symlink ability, xfs
	initrd load

2001/12/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/stage1.h: support
	"filename" in DHCP answers and give this
	to stage2 as --kickstart parameter

2001/12/11  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator_consts.pm, keyboard.pm: finish journalled fs usage - PPC,
	add "\n" keyboard.pm, new modelines

2001/12/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: added network package not present in @needToCopy
	(package that may be installed
	by DrakX to avoid re-asking of CD1).

	* bootloader.pm: added safe guard against looping symlink.

2001/12/10  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, any.pm, bootloader.pm: 
	  - fix bootloader::add_append
	  - add handling of serial console

	* http.pm, install_any.pm: enable http:// in auto_install file location

2001/12/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: no need to give kernelVersion to bootloader::suggest

	* install_any.pm (kernelVersion): looks at /boot/vmlinuz

	* bootloader.pm (suggest, add_kernel): much cleanup

	* diskdrake.pm: fix call to fileshare_config

2001/12/05  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: updateed logo

2001/12/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile, mdk-stage1/pcmcia_/cardmgr.c: 
	  - fix problems with sockets not initialized (disabling
	hotplug support -> cardmgr handles sockets)
	  - fix problems with PCMCIA net adapters now using PCI
	  modules, by adding PCMCIA base code in `network.img'

2001/12/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: no need to give kernelVersion to bootloader::suggest

	* pkgs.pm (selectPackage): hard coded preference to simple kernel

	* install_any.pm (kernelVersion): looks at /boot/vmlinuz

	* diskdrake.pm: fix call to fileshare_config

	* steps.pm: createBootdisk now after setupBootloader (together with dumber
	install_any::kernelVersion)

	* network/tools.pm: fix missing ";" (thanks to Robert Fox)

	* bootloader.pm (suggest, add_kernel): much cleanup

	* fs.pm: fix type "smb" vs "smbfs", and handle options in fs::mount

2001/12/05  sdupont

	* pixmaps/backup_bot2.png: update pixmaps

	* standalone/drakbackup: todo : scp ssl sftp rsync connections perl || c ?
	done : bzip2 backup
	merge

2001/12/04  dam's  <damien@mandrakesoft.com>

	* standalone/drakbackup: corrected pixmap path
	corrected pixmap path

	* Makefile.config: added drakbackup drakfont

2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* any.pm, mdk-stage1/log.c, docs/README: save stage1.log and have it in
	report.bug

	* mdk-stage1/automatic.c, mdk-stage1/doc/TECH-INFOS: support shorter
	versions of automatic keywords to beat problems with very long kernel
	commandlines

	* install_interactive.pm: try to not get something poorly wrapped

	* c/stuff.xs.pm: floppy_info: add missing close(fd)

2001/12/04  Pixel  <pixel@mandrakesoft.com>

	* network/smb.pm: cleaner smbclient call

	* install_steps.pm: re-enable supermount by default

2001/12/04  sdupont

	* pixmaps/backup_bot.png, pixmaps/backup_left.png: correct colors
	problems.

	* standalone/drakbackup: bzip2 ok for compression to see: decomp without
	pbs whith tar.gz and tar.bz2
	todo: update mode -> decomp + update tar file + recomp

2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_interactive.pm: try to not get something poorly wrapped

2001/12/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: re-enable supermount by default

	* network/smb.pm: cleaner smbclient call

2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fix bad parsing of package to copy (when one doen't
	exist anymore) in
	postinstall_rpms directory.

2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_interactive.pm: try to not get something poorly wrapped

2001/12/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: re-enable supermount by default

	* network/smb.pm: cleaner smbclient call

2001/12/04  dam's  <damien@mandrakesoft.com>

	* network/network.pm: additional package for wlan

	* network/tools.pm: corrected pipe reading

2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: make sure lilo is installed on automatic mode.

	* install_any.pm: fix bad parsing of package to copy (when one doen't
	exist anymore) in
	postinstall_rpms directory.

2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_interactive.pm: try to not get something poorly wrapped

	* mdk-stage1/modules.c: fpons is a sucking chief

	* modules.pm, mdk-stage1/usb-resource/update-usb-ids.pl,
	mdk-stage1/Makefile, mdk-stage1/.cvsignore, mdk-stage1/probing.c:
	support install from USB CDROMS (using usb-storage)

2001/12/04  Pixel  <pixel@mandrakesoft.com>

	* network/smb.pm: cleaner smbclient call

2001/12/04  sdupont

	* standalone/drakbackup: last update... for cooker
	drakbackup deamon -> ok
	drakbackup cvs -> to do (only for /etc)
	drakbackup wizard -> only last step
	drakbackup cd -> device detection and ask for only iso file.
	drakbackup net -> do rsync
	drakbackup begin -> todo : update initial message
	update help and about.

2001/12/04  dam's  <damien@mandrakesoft.com>

	* network/network.pm: additional package for wlan

2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: make sure lilo is installed on automatic mode.

	* mdk-stage1/modules.c: fixed g�g� sucking.

2001/12/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules.c: fpons is a sucking chief

2001/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/modules.c: fixed g�g� sucking.

2001/12/04  sdupont

	* standalone/drakbackup: update...

2001/12/03  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: removed use gtk

2001/12/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/updatehdlist: initial revision, simple way to update a local set
	of medium from /RPMS.

2001/12/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules.c: typo of last commit (unused variable -> could not
	compile)

2001/12/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/hu.po, share/po/es.po: updated Hungarian
	and Spanish files

2001/12/03  sdupont

	* standalone/drakbackup: update
	option step.
	write other file content.
	restore gi.

2001/12/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2001/12/01  sdupont

	* standalone/drakbackup: do not include browser cache.

2001/11/30  Fran�ois Pons  <fpons@mandrakesoft.com>

	* docs/spec-DrakX-8.0.html: added spec (forgotten for quite a long)

2001/11/30  gbeauchesne

	* partition_table_gpt.pm: 
	  - cleanups from mainline

	* modules.pm: Suckiness fixes from mainline (gc):
	  - Do parse /proc/modules in reverse order
	  - Fix "convert old scsi_hostadapter's to new probeall" scheme

	* bootloader.pm: 
	  - Don't forget to link the initrd to the real image in /boot/efi/ too
	  - Remove DEBUG printouts in install_efi_boot_menu

2001/11/30  Pixel  <pixel@mandrakesoft.com>

	* network/smb.pm, any.pm, Makefile.drakxtools, standalone/diskdrake,
	Makefile.config, diskdrake.pm: fileshare should be ok, handle diskdrake
	--fileshare, fix smb import

2001/11/30  sdupont

	* pixmaps/backup_left2.png: drakbackup pixmap

	* standalone/drakbackup: backend mode-> ok for hd
	we can use drakbackup !.
	todo :
		backend mode:
			- net
			- cd
	
		advanced mode:
			- device detection (cd writer)
	
		wizard:
			- end of this step.
	
		gi:
			- option step in adnanced step to choice
			for example tar.gz or tar.gz2 ...
	update
	restore step 1 & 2.
	adv step -> ok
	todo: wizard ...
	little update!
	
	variables correction in advanced step.
	wizard user question, sys question & daemon

2001/11/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* share/rpmsrate: Remove linux_logo

2001/11/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: add wvlan_cs

	* mdk-stage1/modules.c: remove unneeded handling of "alias
	scsi_hostadapter"

	* mdk-stage1/stage1.c: add another expert_third_party_modules at the end
	of enabling-pcmcia-stuff

2001/11/29  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: remove the export tree for nfs/smb feature, remove some
	test code
	tentative version with export/import nfs/smb tree (committed to have it
	in CVS as the export tree is already deprecated)

	* standalone/fileshareset: 
	  - allow root to export everything
	  - remove empty mntpoint (from smb)

2001/11/29  sdupont

	* standalone/drakbackup: just update....
	advanced: users correction during save.
	user pass, user login, path to save local or on host
	          combo for network protocol.
	wizrad:   already to do!
	CDRW burn:     todo: devices detection (see to_fond_cd).
	code cleaning.

	* standalone/drakfont: cleanning code.

2001/11/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: 
	  - fix pixel sucks of not parsing /proc/modules in
	reverse order
	  - be more in sync regarding names of pcmcia drivers

	* any.pm: add modules.conf in report.bug

2001/11/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/zh_CN.po, share/po/zh_TW.po: updated Chinese file

2001/11/28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (read_conf): fix "convert old scsi_hostadapter's to new
	probeall"

	* standalone/drakbackup: make check_what_user works

	* standalone/fileshareset: better description
	gr_mem in getgrent is space separated, not comma separated
	add samba handling. Should be finished now :)

2001/11/28  sdupont

	* pixmaps/backup_bot2.png, pixmaps/quit.png: drakbackup pixmaps.

	* standalone/drakbackup: no important changement!
	clean code
	update!
	for gc & Warly: some fixes, correction of advanced, wizard and after
	advanced steps.
	the user have a better gestion during advanced step, the protocols ftp,
	sftp, scp, rsync
	are now include in advanced step..... etc ;-)
	todo: when checkbuttonbox are clicked for user choice set it to 0 or 1
	juste after.
	clean code.
	new after advanced step, correction of checkbuttons problems & new
	pixmaps.

2001/11/27  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake.png: updated, cooker style

2001/11/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: avoid problem of array reference badly evaluated.

2001/11/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/mailchangelog.pl: beurk
	changelog is at linux-mandrake not mandrakesoft

	* install_steps.pm: i810 -> no FB at boot

2001/11/27  Pixel  <pixel@mandrakesoft.com>

	* partition_table_gpt.pm (generate_guid): cleanup

	* any.pm (setupBootloader): s/last/return/

2001/11/27  sdupont

	* standalone/drakbackup: advanced step...
	update.
	advanced mode ... and ...
	read and use user list correctly, advanced step user list.

	* pixmaps/hd.png, pixmaps/net.png, pixmaps/cdrom.png: pixmaps for
	drakbackup.

2001/11/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* tools/i386/netboot/stage2.rtl8139: add rtl8139 netboot file that works

	* tools/i386/netboot/stage1.rtl8139: add rtl8139 netboot file that works
	stage1/stage2 of rtl8139 didn't work

2001/11/26  dam's  <damien@mandrakesoft.com>

	* common.pm, my_gtk.pm: new features for new mcc

2001/11/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: getAndSaveAutoInstallFloppy: don't die when output'ing
	of
	auto_inst.cfg is not possible

2001/11/26  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: add $o->{excludedocs} feature

	* Makefile.drakxtools: remove unneeded files (*.bs and .exists)

	* interactive_gtk.pm: cleanup

2001/11/26  sdupont

	* standalone/drakbackup: new gi, advanced step.
	update.
	gawk cmds.
	better use for read and save conf. file now on
	/etc/draxtools/drakbackup/drakbackup.cfg

	* pixmaps/backup_hd.png, pixmaps/backup_options.png,
	pixmaps/backup_net.png, pixmaps/backup_time.png: png files for
	DrakBackup.

2001/11/25  Pixel  <pixel@mandrakesoft.com>

	* standalone/fileshareset: first version. for the moment, only nfs.

2001/11/25  sdupont

	* standalone/drakbackup: update of read_conf_file and default mode.

2001/11/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po, share/po/es.po: updated Spanish and Danish files

2001/11/24  sdupont

	* standalone/drakfont: about...

	* standalone/drakbackup: update
	update gi ,build of system, user, other, options interfaces.
	advanced step.

2001/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: package for pcmcia is now called "pcmcia-cs"

	* any.pm, detect_devices.pm: pcmcia: /var/run/stab is nor
	/var/lib/pcmcia/stab
	yes it probably doesn't bring anything valuable but it's
	how life is :-)

2001/11/23  sdupont

	* standalone/drakbackup: radio buttons & information message.
	change gi interface, include help, about and pixmaps (backup_*.png on
	standalone/pixmaps directory)

2001/11/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: removed loading of agpgart module for i810 card.

2001/11/22  sdupont

	* standalone/drakfont: about button & GPL license.

	* standalone/drakbackup: update gi.
	TODO: separate all the boxes.
	include wizard and advanced in pixmaps.
	update
	notebook gi.

2001/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
	mdk-stage1/init-data/msgboot-blank.img.bz2,
	mdk-stage1/init-data/msgboot.img.bz2: fixed typo in help.msg

	* Xconfigurator.pm: hack for SiS 640 for laptop.

	* install_any.pm: fixed install_urpmi to build a correct urpmi db.

2001/11/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: i810fb
	migrate pcmcia in drakx to use in-kernel version (only
	for 2.4, though --> pcmcia in 2.2 no longer supported)

	* install_steps_interactive.pm, Makefile, c/Makefile.PL: migrate pcmcia in
	drakx to use in-kernel version (only
	for 2.4, though --> pcmcia in 2.2 no longer supported)

	* install2.pm: i810fb

	* mdk-stage1/stage1.c, mdk-stage1/pcmcia_/lex_config.c,
	mdk-stage1/pcmcia_/cardmgr.c, mdk-stage1/pcmcia_/yacc_config.c,
	mdk-stage1/pcmcia_/Makefile, mdk-stage1/Makefile,
	mdk-stage1/pcmcia_/pcmcia.h, mdk-stage1/pcmcia_/ds.h,
	mdk-stage1/pcmcia_/probe.c: migrate to pcmcia support from kernel,
	patching untouched imported
	sources from pcmcia-cs-3.1.29, to ease further updates of vendor
	code (start from a clean pcmcia_ subdir)

2001/11/21  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (suggestions_mntpoint): if there's no server suggestion, use
	the simple
	one, so that 'simple' is the only one required when someone modifies
	%fsedit::suggestions

2001/11/20  gbeauchesne

	* partition_table.pm: 
	  - Add isEfi() to isOtherAvailableFS() test so that install doesn't
	suggest
	to format /boot/efi by default. That way, we could preserve (shame on
	us)
	  EFI boot partition generated by Windows XP 64 bits...

2001/11/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pcmcia_/lex_config.c, mdk-stage1/pcmcia_/cardmgr.c,
	mdk-stage1/pcmcia_/bulkmem.h, mdk-stage1/pcmcia_/cardmgr.h,
	mdk-stage1/pcmcia_/vg468.h, mdk-stage1/pcmcia_/driver_ops.h,
	mdk-stage1/pcmcia_/i82365.h, mdk-stage1/pcmcia_/cirrus.h,
	mdk-stage1/pcmcia_/version.h, mdk-stage1/pcmcia_/cistpl.h,
	mdk-stage1/pcmcia_/yacc_config.c, mdk-stage1/pcmcia_/cs_types.h,
	mdk-stage1/pcmcia_/cs.h, mdk-stage1/pcmcia_/yacc_config.h,
	mdk-stage1/pcmcia_/ds.h, mdk-stage1/pcmcia_/tcic.h,
	mdk-stage1/pcmcia_/probe.c: Initial revision
	version 3.1.29

2001/11/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive_stdio.pm: for po i can't use $ for string interpolation

2001/11/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* services.pm, standalone/scannerdrake: Corrected English errors

	* share/po/hu.po, share/po/cs.po: updated pot file
	updated Czech and Hungarian files

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/no.po, share/po/fi.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/af.po:
	updated pot file

2001/11/19  Pixel  <pixel@mandrakesoft.com>

	* any.pm (setupBootloader): fix typo
	(setupBootloader): fix typo

2001/11/19  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Last correction was wrong, reverted it.

2001/11/19  yduret

	* standalone/scannerdrake: added dynamic support

2001/11/16  Pixel  <pixel@mandrakesoft.com>

	* any.pm: syntax cleanup
	  - a little cleanup
	  - in case there is both scsi and ide hard drives, go to expert
	questions
	directly (it would need a semi_auto asking on which drive the bios
	boots...)

2001/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help file

	* keyboard.pm: Added Swedish dvorak keyboard

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/help_xml2pm.pl, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file

2001/11/12  sdupont

	* standalone/drakbackup: new backup tool.
	backend_mode with options.
	        begin interactive mode.

2001/10/29  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: code correction

2001/10/29  gbeauchesne

	* rescue/list.ia64: 
	  - Add xfs_repair and efibootmgr

2001/10/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* fs.pm, loopback.pm, fsedit.pm, bootloader.pm: revert back to /initrd

	* modules.pm: here too
	CDCEther looks good, I add it

2001/10/29  Pixel  <pixel@mandrakesoft.com>

	* tools/pcmcia_config.patch: adapt for new pcmcia-cs

2001/10/29  sdupont

	* standalone/drakfont: Copyright (C)
	correction of warning & code cleaning.
	the end.... i think...
	updated
	uninstall interface & progress bar
	uninstall interface : lists & progress bar
	new progress bar update
	todo: second list

2001/10/28  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: cleaning

2001/10/27  daouda

	* devices.pm, my_gtk.pm, Xconfig.pm: return value at end of module

	* share/rpmsrate: 
	  - increase icewm weight.

2001/10/26  dam's  <damien@mandrakesoft.com>

	* standalone/drakautoinst, standalone/drakfont: progress bar hack

2001/10/26  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/pcmcia_config.patch: was duplicated in gi/tools

	* partition_table_gpt.pm, partition_table_raw.pm: no adjust start and end
	on GPT

2001/10/26  sdupont

	* standalone/drakfont: updated.
	search correct progress bar mode implementation.
	updated
	fix some bugs & interface progress implementation.
	TODO:
	progress before backend.
		search if directory already exist before custom install.

2001/10/25  dam's  <damien@mandrakesoft.com>

	* standalone/drakautoinst: simple variables handled, code compression.
	The new and shiny drakautoinst is coming. P|-|34R
	The new drakautoinst is coming. P|-|34R

	* pixmaps/mdk_logo.png: additional logo

	* standalone/drakfont: code correction

2001/10/25  sdupont

	* standalone/drakfont: merge differents versions.
	file sector, list of fonts for advanced install...
	applications choice, license widget, help widget.

2001/10/24  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: updated
	updated
	updated, lot of bugs.
	updated

	* my_gtk.pm: added set_editable

2001/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/lsparts, mdk-stage1/rescue-gui.c, mdk-stage1/frontend.h,
	mdk-stage1/.cvsignore, rescue/install_bootloader,
	rescue/tree/etc/rc.sysinit, rescue/Makefile,
	mdk-stage1/stdio-frontend.c, rescue/guessmounts, mdk-stage1/Makefile,
	rescue/tree/etc/issue, rescue/make_rescue_img,
	mdk-stage1/newt-frontend.c: 
	  - add a GUI to the rescue
	  - provide guessmounts with better efficiency and output, go to
	console, and reboot
	  - provide install_bootloader which runs lilo from /mnt if it seems
	safe
	  - add lsparts to rescue, which prints partitions with detected types

2001/10/24  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm: replace /initrd with /lib/initrd
	(hds): in case of GPT, allow ext2 to be replaced by any kind of
	partitions (esp. EFI)

	* partition_table.pm, partition_table_gpt.pm, partition_table_bsd.pm,
	partition_table_raw.pm: add methods first_usable_sector and
	last_usable_sector

	* fs.pm, loopback.pm, bootloader.pm: replace /initrd with /lib/initrd

2001/10/24  sdupont

	* standalone/drakfont: scroll
	`
	import_status & progress.
	gi update.

2001/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* services.pm: tagged as translatable some left out strigns

2001/10/23  sdupont

	* standalone/drakfont: gi update
	doc and progress bar.
	gui: install from directory
	gui supported.

2001/10/23  yduret

	* share/po/fr.po: fixed fohtes grammar

2001/10/22  dam's  <damien@mandrakesoft.com>

	* network/tools.pm: speedtouch config : added usa vpi vci

2001/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules.c: oops forgot to umount after "updatemodules"...

2001/10/22  Pixel  <pixel@mandrakesoft.com>

	* rescue/tree/etc/profile: fix PATH (have /mnt/bin /mnt/usr/bin ...)

2001/10/21  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed connection device setting for "oki4w" driver.

2001/10/19  gbeauchesne

	* partition_table_gpt.pm: 
	  - Use /dev/random through devices::make() instead of /dev/urandom
	  - Localize file descriptor
	  - Capitalize error message if no /dev/random found

	* partition_table.pm: 
	  - s/Win98 FAT32/FAT32/
	  - s/Partition that contains an EFI file system/EFI (FAT-12/16/32)/
	  - Add "FAT32" to @important_types for IA-64 & /boot/efi

2001/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stdio-frontend.c: small fix

2001/10/19  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm: OOize can_raw_add

	* partition_table.pm: handle empty $hd->{primary}{raw} (happens with no
	partitions on ia64)
	  - raw_add, can_raw_add moved to partition_table_raw
	  - using raw_removed

	* partition_table_dos.pm: better handling of CHS overflow (mainly for non
	cylinder-boundary aligned part (like ia64))

	* partition_table_raw.pm (adjustEnd): in case the end is totalsectors,
	don't adjust since totalsectors / cylinder_size may not be an integer
	(zero_MBR): defaults to GPT on ia64
	(raw_add, can_raw_add, raw_removed): created, can now be overloaded in
	partition_table_*.pm's
	(get_geometry): keep the total_sectors as given by c::total_sectors,
	don't try to recompute it based on nb_cylinders (for hds where
	total_sectors is not a multiple of nb_cylinders)

	* common.pm: cleanup

	* partition_table_gpt.pm: fix ending is last sector, not next one
	add TODO for partition entry guid
	  - writing partition table now works
	  - creating a new partition table now works (except GUIDs generation)

2001/10/18  dam's  <damien@mandrakesoft.com>

	* network/tools.pm: corrected GET_FL and co

2001/10/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* standalone/XFdrake: fix ia64 glitches with /usr/X11R6/lib/X11/Cards (now
	use rgb.txt instead).

2001/10/18  Pixel  <pixel@mandrakesoft.com>

	* partition_table_gpt.pm: 
	  - add checksum verif on partition entries
	  - detect the type of partition since the partition table types seem
	quite poor
	read part of GPT partition table working

	* fsedit.pm: 
	  - add checksum verif on partition entries
	  - detect the type of partition since the partition table types seem
	quite poor

	* partition_table.pm: read part of GPT partition table working
	shorter GPT name

	* detect_devices.pm: safer modprobe ide-floppy

2001/10/18  sdupont

	* standalone/drakfont: change Fontmap ghostscript file.
	drakfont support now .gsf fonts
	end of backend......
	update

2001/10/17  dam's  <damien@mandrakesoft.com>

	* standalone/draksec: typo

2001/10/17  sdupont

	* standalone/drakfont: implementation of type1 fonts removing.
	ghostscript, xfs and staroffice tested and supported.

2001/10/16  dam's  <damien@mandrakesoft.com>

	* standalone/draksec: correct bad level display

	* standalone/interactive_http/Makefile: makes rpmlint happy

2001/10/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: print checks

	* rescue/tree/etc/rc.sysinit: better phrasing

2001/10/16  Stew Benedict  <sbenedict@mandrakesoft.com>

	* rescue/devices.pl, mdk-stage1/pci-resource/update-pci-ids.pl,
	rescue/list.ppc: typo in update kernel by /me
	fine-tune sanity_check for ppc
	move /dev/nvram from list.ppc to devices.pl

2001/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2001/10/15  yduret

	* scanner.pm: wonderful perl forgotten

2001/10/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: have "other.img" drivers also
	supported

2001/10/12  sdupont

	* standalone/drakfont: support all installations, and support xfs,
	ghostcript, staroffice.
	todo aplli: openoffice, gimp, abiword, netscape & other browsers...
	todo or to see: --strong  ttmkfdir -c ???
	emd of backend..

2001/10/11  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: multiple card configuration bug corrected.
	allelluia.

	* network/tools.pm: aded use c

	* standalone/drakfont: code review

2001/10/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* interactive_stdio.pm, install_steps_stdio.pm: stdio mode works again

2001/10/11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: ensure postInstallNonRooted is done *before* ejecting cdrom

2001/10/11  sdupont

	* docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
	docs/drakfont/drakfont.dvi: clean directory..

	* docs/drakfont/drakfont.aux, docs/drakfont/dia_srcs/drakfont.dia,
	docs/drakfont/dia_srcs/drakfont_uninstall.dia,
	docs/drakfont/dia_srcs/drakfont_install.dia: delete all bads files...

	* standalone/drakfont: improved....
	improved && implement remove fonts for xfs
	improved
	improved
	optimisation
	correction of option install --replace
	dialog of install options
	correction of install option.

	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont_install.jpg,
	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: jpg &
	ps with -kb option
	clean...2

2001/10/10  dam's  <damien@mandrakesoft.com>

	* standalone/drakfont: typo
	improved options handling

	* standalone/net_monitor: ergo and features improvments, pipe handling
	correction

	* network/tools.pm: updated

2001/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/locales-skeleton.tar.bz2: enabled Maltese language

2001/10/10  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm: normalize the default type entry ("entry")

	* interactive_gtk.pm: fix typo (on clicked_may_quit)

2001/10/10  sdupont

	* standalone/drakfont: option replace for "install from" &
	windows_import...
	update install dir
	better for --install
	new version of drakfont. in perl langage.

	* docs/drakfont/drakfont.jpg, docs/drakfont/drakfont.aux,
	docs/drakfont/drakfont.log, docs/drakfont/drakfont.pdf,
	docs/drakfont/drakfont.tex, docs/drakfont/Makefile,
	docs/drakfont/drakfont_install.jpg, docs/drakfont/drakfont.dvi,
	docs/drakfont/drakfont_uninstall.jpg, docs/drakfont/mandrake.ps: docs
	drakfont

2001/10/10  yduret

	* standalone/scannerdrake: first apparition on earth..

	* Makefile.config: added scannerdrake

2001/10/09  dam's  <damien@mandrakesoft.com>

	* network/tools.pm: removed trash
	connection test is now in background, corrects the interface freeze
	problem

	* pixmaps/net_u.png: new pixmap for draknet/net_monitor

	* standalone/net_monitor, standalone/draknet: connection test is now in
	background, corrects the interface freeze problem

2001/10/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Hungarian file

2001/10/09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: fix detecting read-only drives (like memory-sticks)

	* partition_table.pm: make perl_checker happy

	* partition_table_raw.pm: fix detecting read-only drives (like
	memory-sticks)
	make perl_checker happy

	* modules.pm, detect_devices.pm, install2.pm: ensure floppies() takes care
	of usb-storage if possible, so that patch on usb floppy works

2001/10/09  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator_consts.pm, keyboard.pm, Xconfigurator.pm: move to Linux
	keycodes on PPC, add additional Apple modelines

	* install_steps_interactive.pm: re-enable PPC bootloader setup

2001/10/08  dam's  <damien@mandrakesoft.com>

	* c/stuff.xs.pm: added FL_GET and FL_SET

2001/10/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* modules.pm: keep isp and gdth module for hd.img (as well as all.rdz) as
	they have been
	removed from the skip list for stage1.

	* rescue/tree/etc/oem: added silly modification to avoid using more than 7
	partition for DAC960 (/home
	and /var are not created in the current state).

2001/10/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: ia64

	* mdk-stage1/Makefile: 8.1 -> cooker

2001/10/08  Pixel  <pixel@mandrakesoft.com>

	* modules.pm, partition_table.pm: yet a few other ataraid cases

2001/10/06  Stew Benedict  <sbenedict@mandrakesoft.com>

	* partition_table_raw.pm, partition_table.pm: updates to accomodate IBM
	PPC systems with DOS partition table

2001/10/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: added (missing) creation of
	/hd/boot/grub/device.map (needed for
	CompactSmartArray).

2001/10/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: kdegames : 2 -> 4

2001/10/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fix (work around) parted problem when it refuse to
	use all disk space for
	partition.
	added another psacct log file in touch.
	fixed typo on scalar reference for psacct bug.
	updated with 8.1 OEM ProSuite.

	* tools/oem-prepare: updated with 8.1 OEM ProSuite.

2001/10/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po: updated Hungarian file

2001/10/04  Pixel  <pixel@mandrakesoft.com>

	* partition_table_dos.pm: is little-endian, so use "V" instead of "I"

2001/10/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: synced with oem script.
	removed 3D games not installed by default.

	* rescue/tree/etc/oem: fixed typo in produced patch.
	added extension to pro suite CD (added kernel-enterprise to possibly
	installable
	and install kernel22).
	removed 3D games not installed by default.
	added missing xmms-arts.
	allow halting.

2001/10/03  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm: yet another ataraid support patch

2001/10/02  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fix previous hack.
	added hack to do "/sbin/depmod -a" for NVIDIA driver.

2001/10/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/probing.c: new pci-ids.h

	* mdk-stage1/usb-resource/update-usb-ids.pl: better look

	* share/po/fr.po: small fix

	* standalone/drakgw: don't call pkgs_install when no package needs to be
	installed

2001/10/02  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm: bloody ataraid detection

	* devices.pm: ataraid devices support

2001/10/01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/rpmsrate: fixed bad format for BOOKS used in DEVELOPMENT.

	* rescue/tree/etc/oem: added CHARSET support, removed kernel22 and
	kernel-enterprise from list of
	package installable in oem mode, added possibility to set language on
	/etc/oem
	script invocation.

	* install_steps_interactive.pm: avoid chooseCD on oem install.

	* install_steps_gtk.pm: avoid asking for changing CD on oem install.

	* install_any.pm: use $boot_medium for default medium in oem install,
	avoid using kernel22 or
	kernel-enterprise in oem install (space available is too tight on CD oem
	version).

	* tools/oem-prepare: synced with oem script.

2001/10/01  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: reword it so that it reflects
	what's in the marfiles

2001/10/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po: updated Bulgarian file

2001/09/29  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* docs/README: New adress where to find the kernel BOOT

2001/09/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2001/09/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/drvinst: don't install usb keyboard drivers more than once
	try to fix usb keyboards

2001/09/27  kjx

	* share/po/zh_CN.po: translating

2001/09/26  gbeauchesne

	* install_any.pm: 
	  - Suggest /boot/efi on IA-64 for the first VFAT partition found,
	instead
	of /mnt/windows

	* bootloader.pm: 
	  - bootloader.pm (suggest): don't search for dos (or windows) boot
	partition
	on IA-64 since ELILO can only boot Linux.
	  - bootloader.pm (write_lilo_conf): don't cry if we don't have
	/boot/boot.b
	  or boot/message on IA-64.

	* rescue/list.ia64: 
	  - Add file list for "rescue" disk

	* share/list.ia64, partition_table.pm: 
	  - partition_table.pm: Add XFS suggestion for IA-64
	  - share/list.ia64: misc updates and additions wrt. XFS, ReiserFS

2001/09/25  baudens

	* share/po/fr.po: s/Linux Mandrake/Mandrake Linux/
	Remove totally crazy translation.
	Translators, please use your brain!

2001/09/25  gbeauchesne

	* partition_table.pm: 
	  - Add ReiserFS and Ext3fs entries for IA-64

2001/09/25  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (naughtyServers): cleanup comments

2001/09/25  warly

	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
	installed for newbie and drakfirsttime does not fail.
	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
	does not fail.

2001/09/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: allow non ejectable medium to allow all
	hdlists on the bootable medium.
	make current boot medium already selected if multiple hdlist are on this
	boot medium.

2001/09/25  warly

	* share/rpmsrate: put gtk-themes _and_ sawfish-themes to 4 so that it is
	installed for newbie and drakfirsttime does not fail.
	put gtk-themes to 4 so that it is installed for newbie and drakfirsttime
	does not fail.

2001/09/24  dam's  <damien@mandrakesoft.com>

	* share/po/fr.po: corrected translation

2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/mount.c, mdk-stage1/mount.h,
	mdk-stage1/disk.c: hd.img now detects partition types... backport from
	DrakX :-)

2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

2001/09/24  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (mount_part): fix for iso loopback mounted

	* share/po/fr.po: fix

2001/09/24  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/isdn.pm: type assignation bug fix
	corrected type assignation

	* share/po/fr.po: corrected bad translation

	* standalone/draknet: corrected type assignation

2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
	value)

2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
	and Turkish files

2001/09/24  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (mount_part): fix for iso loopback mounted

	* share/po/fr.po: fix

2001/09/24  warly

	* share/rpmsrate: lower arkeia

2001/09/24  dam's  <damien@mandrakesoft.com>

	* modules.pm: corrected isdn firmware

	* network/adsl.pm, network/isdn.pm: type assignation bug fix
	corrected type assignation

	* share/po/fr.po: corrected bad translation

	* standalone/draknet: corrected type assignation

2001/09/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* bootloader.pm: fix add_append (there was a ) at the end of the parameter
	value)

2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
	and Turkish files

2001/09/24  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix small error merging existing fstab

	* share/po/fr.po: fix

	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
	for now)

	* diskdrake_interactive.pm: hide the supermount checkbox in standalone

2001/09/24  warly

	* share/rpmsrate: lower arkeia

2001/09/24  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm, network/ethernet.pm: bug fix

	* modules.pm: corrected isdn firmware

	* network/isdn.pm, network/adsl.pm: type assignation bug fix
	corrected type assignation

	* standalone/draknet: corrected type assignation

	* install_any.pm, rescue/tree/etc/oem: added isdn-light to be copied on hd
	during install

2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
	problems reported with it.

	* share/rpmsrate: allow rpm build for non expert who choose development.

	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
	packages).

2001/09/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/tr.po, share/po/es.po: updated Spanish, Korean
	and Turkish files

2001/09/24  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix small error merging existing fstab
	add "iocharset=" for cdrom

	* install_steps.pm: 
	  - disable supermount by default
	  - cleanup nsswitch.conf wins removing

	* diskdrake.pm: do not propose to mount/umount removable medias (disabled
	for now)

	* diskdrake_interactive.pm: hide the supermount checkbox in standalone

2001/09/24  siegel

	* share/po/de.po: new german version

2001/09/24  warly

	* share/rpmsrate: lower arkeia

2001/09/24  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm, network/ethernet.pm: bug fix

2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: deactivated Riva128 3D hw acceleration and too many
	problems reported with it.

	* share/rpmsrate: allow rpm build for non expert who choose development.
	removed any reference to XFree86-glide-module or Glide_XXX packages.

	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
	hash keys orders in
	install_steps_interactive::chooseCD().

	* install_steps.pm: disable wins in /etc/nsswitch.conf (after installed
	packages).

2001/09/24  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: add "iocharset=" for cdrom

	* install_steps.pm: 
	  - disable supermount by default
	  - cleanup nsswitch.conf wins removing

2001/09/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/rpmsrate: removed any reference to XFree86-glide-module or
	Glide_XXX packages.

	* pkgs.pm: sort mediums by number, in allMediums() else they will be in
	hash keys orders in
	install_steps_interactive::chooseCD().

2001/09/24  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: File permission settings during install were not done.
	Fixed.

2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: misc typo correction

	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode

2001/09/23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server

	* share/rpmsrate: simplify (for the moment)
	do not force X flag, have it selected for any "Graphical Environment"

	* share/compssUsers, install_any.pm: do not force X flag, have it selected
	for any "Graphical Environment"

2001/09/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps.pm: voodoo cards don't like performing 3d accel in fb mode

2001/09/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po, share/po/hu.po: updated Czech and Hungarian file

	* share/po/zh_TW.po: updated Chinese file

2001/09/23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: add "Graphical Environment" in meta_class server

	* fsedit.pm: add magic SWAPSPACE2

	* bootloader.pm: allow bootloader on fat partitions

	* share/compssUsers, share/rpmsrate, install_any.pm: do not force X flag,
	have it selected for any "Graphical Environment"

2001/09/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: version is 8.1

2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bs.po: updated Bosnian file

2001/09/22  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, install2.pm: 
	  - cleanup noatime option setting
	  - cleanup exec option setting (must noexec => 0 instead of exec => 1)

	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu

2001/09/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po: updated Bulgarian file

2001/09/22  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (suggest): fix kernel 2.2 secure adding in menu

2001/09/22  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added support for automatic /dev/... file permissions
	setting by devfsd.
	Improved matching of auto-detection results with database entries.
	Given hint to the user to select the correct model when matching fails.

	* printer.pm: Added support for automatic /dev/... file permissions
	setting by devfsd.

2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm: avoid detecting plip for live upgrade.

2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: use "us" XKB file for Korean keyboard, otherwise some
	functionality is lost
	small fix for "vn" keyboard (enable toggle key)

	* share/po/ko.po: updated Korean file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* printerdrake.pm: small fix

2001/09/21  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: When one changes the driver of a freshly
	added printer, the cursor was not pointed to the old driver, fixed.
	Fixed paper size not set according to chosen language during
	installation.

2001/09/21  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm: typo

2001/09/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: reworked medium management.
	moved com_license to parent package (as code that show the license is
	now
	available even for non gtk install).

	* Xconfigurator.pm: S3 ViRGE is a bad card for testing on live upgrade.

	* pkgs.pm, install_any.pm: reworked medium management.

	* detect_devices.pm: avoid detecting plip for live upgrade.

	* install_steps_interactive.pm: avoid keeping testing code.
	reworked medium management.
	added code to support changeable cdrom, set a unique copy of license for
	installing commercial application as package variable (exported).

2001/09/21  gbeauchesne

	* share/po/no.po: remove trailing '\n'

2001/09/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hu.po, share/po/no.po: updated pot file
	updated pot file
	updated Norwegian and Hungarian files
	updated pot file

	* help.pm: updated help file

	* share/po/help_xml2pm.pl: updated pot file

	* printerdrake.pm: small fix
	changed text strings to be more translator friendly
	(NEVER EVER cut a phrase)

	* share/po/zh_CN.po, share/po/ru.po, share/po/vi.po: updated pot file
	updated pot file
	corrected extra \n
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file
	updated pot file
	updated pot file

	* keyboard.pm: adapted keyboard priority numbers (it is useless to give a
	multichoice with a
	value higher than 90)

	* share/po/zh_TW.po: updated pot file
	updated pot file

2001/09/21  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm: write password in lilo.conf even if it's also done by
	msec, otherwise lilo will fail with restricted only

	* install_steps.pm: Ensure $o->{superuser}{name} is temporary

	* share/rpmsrate, install_any.pm: add HIGH_SECURITY flag, use it for
	libsafe and kernel22-secure

2001/09/21  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Added a forgotten "_( ... )".

2001/09/21  warly

	* share/rpmsrate: add gnomemeeting and openmcu

2001/09/20  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
	flag modifications in
	diskdrake do not escape from diskdrake

	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
	check bad blocks for xfs and jfs

2001/09/20  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: don't reapply the conf, if already applied.
	usefull for dhcp, because the network should be restarted after
	configured

	* network/adsl.pm: test if microcode is there

	* bootlook.pm: removed blocking die

2001/09/20  fcrozat

	* share/rpmsrate: Add gnome-user-docs to GNOME install
	Install Mdk eazel engine for gnome

2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
	this cause
	problem in live_upgrade.

	* Xconfigurator.pm: added VideoRam for ET 6x00 card.

	* network/netconnect.pm: tried to fix damien sucking.

2001/09/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: misc

2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

	* share/po/cs.po: updated Czech file

	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
	Chinese and Dutch files

2001/09/20  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm (partition_with_diskdrake): ensure the $::expert
	flag modifications in
	diskdrake do not escape from diskdrake

	* share/rpmsrate: raise i18n fonts

	* fsedit.pm (hds): do a get_major_minor where needed

	* lang.pm: replace xcin by chinput as per Alex request

	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
	check bad blocks for xfs and jfs

2001/09/20  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed flow of the program for the "recommended" mode of
	the installation.

2001/09/20  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: don't reapply the conf, if already applied.
	usefull for dhcp, because the network should be restarted after
	configured

	* mouse.pm: text positionning

	* standalone/net_monitor: less gethostbyname

2001/09/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: take care not probing in /dev/ for finding package to upgrade,
	this cause
	problem in live_upgrade.

	* network/netconnect.pm: tried to fix damien sucking.

2001/09/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po, share/po/da.po, share/po/zh_TW.po: updated Danish,
	Chinese and Dutch files

2001/09/20  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: raise i18n fonts
	s/telnet-server/telnet-server-krb5/

	* fsedit.pm (hds): do a get_major_minor where needed

	* fs.pm (add2all_hds): allow both "smbfs" and "smb" as fs type

	* lang.pm: replace xcin by chinput as per Alex request

	* printerdrake.pm: back out the modif from till as asked by till

2001/09/20  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Make it possible to configure more than 1 printer in a
	"recommended" mode installation.

2001/09/19  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
	restart at better place

2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: chromium and tuxracer don't work well with Riva

2001/09/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: updated pot file
	updated help xml

	* help.pm: updated help file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/bg.po, share/po/sr.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
	share/po/sv.po, share/po/hu.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/de.po:
	updated help xml

	* share/po/wa.po: updated pot file
	updated pot file

2001/09/19  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/netconnect.pm, network/ethernet.pm: network
	restart at better place

2001/09/19  fcrozat

	* share/rpmsrate: Add mdk-eazel-engine

	* share/po/fr.po: Fix french mistakes

2001/09/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added code to check if package are really installed.

	* Xconfigurator.pm: Rage 128 doesn't like XF3 at all.
	make only bad card Riva128 for testing XF4.
	Riva128 is now a bad card.

2001/09/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/init.c: raklet quoting

	* share/rpmsrate: chromium and tuxracer don't work well with Riva

2001/09/19  Pixel  <pixel@mandrakesoft.com>

	* loopback.pm (create): don't use seek to create big files otherwise you
	get hole and
	swapon doesn't like it

	* any.pm (ask_users): default icon "man"

	* lang.pm: compatibility with older $o->{lang} names (for auto_installs)

	* install2.pm: initial support for server install
	compatibility with older $o->{lang} names (for auto_installs)

	* install_steps_gtk.pm: initial support for server install

	* printerdrake.pm: help perl_checker

	* pkgs.pm, share/rpmsrate, install_any.pm: 
	  - gmc instead of nautilus for non-latin1 installs
	  - introduce CHARSET flag and use it

2001/09/19  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Network is now only required (and checked) for remote
	printers.
	Several buglets fixed in remote CUPS server dialog.

	* printerdrake.pm: Removed a forgotten debug help line from the code.
	Fixed typo in dialog text of high/paranoid security.
	Network is now only required (and checked) for remote printers.
	Several buglets fixed in remote CUPS server dialog.

2001/09/18  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: don't ask to connect if lan or dhcp

2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install2.pm: don't create bootdisk by default

	* share/po/fr.po: misc

2001/09/18  Pixel  <pixel@mandrakesoft.com>

	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)

	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
	installs

2001/09/18  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, my_gtk.pm: corrected Speedtouch -> speedtouch

	* network/netconnect.pm: don't ask to connect if lan or dhcp

	* standalone/drakgw: debug

2001/09/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: added X group with SYSTEM.
	finally work arounded rpm bug by flepied.

	* detect_devices.pm: added back full pci probe for stage2 command lspci.
	removed full pci probe for stringlist (used for generating report_bug).

	* install_steps_interactive.pm: now finally really fixed printer label in
	summary dialog.
	fixed printer description in summary (again).
	fixed no printer displayed (at least, print Remote CUPS server).

	* commands.pm: make lspci a full pci probe instead of safe pci probe.

2001/09/18  gbeauchesne

	* Xconfigurator.pm: 
	  - Force XFree 4 on IA-64. No XFree 3.3.X there...

	* tools/ia64/elilo.efi: 
	  - elilo 3.1

2001/09/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install2.pm: don't create bootdisk by default

	* standalone/drakautoinst: have "manual" and "replay" translated

	* share/po/fr.po: misc

2001/09/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po, share/po/hu.po: updated Dutch and Hungarian files

2001/09/18  Pixel  <pixel@mandrakesoft.com>

	* lang.pm, share/gen_locales.sh, share/locales-skeleton.tar.bz2: 
	  - remove ISO-8859-5, KOI8-R and KOI8-U
	  - cleanup packdrake extracting locales
	  - cleanup/fixes lang.pm

	* install_steps.pm: fix setting kdmrc for latin1

	* any.pm (write_passwd_user): fix setting "pw" field (for auto_installs)

	* install_steps_gtk.pm, pkgs.pm: tentative to correct install time for big
	installs

2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/list: updated for rpm 4.0.3.

	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
	"rpm --root" but need more testing.

	* standalone/XFdrake: removed comment.
	added support to configure NVIDIA driver if everything is correctly
	installed.

2001/09/17  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, fsedit.pm: 
	  - '--' to separate options for supermount + small workaround (ro and
	exec before --)
	  - fix nfs in manualFstab (for auto_installs, reported by David
	Eastcott)

2001/09/17  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
	in expert install.

2001/09/17  dam's  <damien@mandrakesoft.com>

	* network/network.pm: no expert mode needed to choose gateway

2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/list: updated for rpm 4.0.3.

	* rescue/tree/etc/oem: updated for 8.1, contains workaround for bug of
	"rpm --root" but need more testing.

	* printerdrake.pm: add eval around installing lexmark-driver
	(proprietary).

	* Xconfigurator.pm: deactivating bad card test (too).

	* standalone/XFdrake: removed comment.
	added support to configure NVIDIA driver if everything is correctly
	installed.

2001/09/17  odin

	* share/po/fr.po: updated fr.po

2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: Added choice of "English|Ireland (euro)" so people wanting
	English language but also euro symbol can choose it.
	fixed Belgian keyboard

	* share/po/fr.po, share/po/wa.po, share/po/es.po: updated Spanish and
	Wallon files; corrected error syntax in French file

	* lang.pm: Added choice of "English|Ireland (euro)" so people wanting
	English language but also euro symbol can choose it.

2001/09/17  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: 
	  - '--' to separate options for supermount + small workaround (ro and
	exec before --)
	  - fix nfs in manualFstab (for auto_installs, reported by David
	Eastcott)
	(mount): do not hand update /etc/mtab for nfs mounts, already done by
	mount(8)
	(set_default_options): disable iocharset= and codepage= for supermount

	* partition_table.pm (adjust_main_extended): do not use linux extended

	* detect_devices.pm (pci_probe): log full pci probes

	* standalone/drakbug_report: fix

	* fsedit.pm: 
	  - '--' to separate options for supermount + small workaround (ro and
	exec before --)
	  - fix nfs in manualFstab (for auto_installs, reported by David
	Eastcott)

2001/09/17  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Fixed bug of /etc/foomatic/defaultspooler not been written
	in expert install.
	Do not die when "chkconfig" fails (needed for "security_check").
	Added "-q" option to foomatic-configure (should not get interactive).
	Added handling of high and paranoid security levels.

	* printerdrake.pm: /etc/foomatic/defaultspooler was not written in expert
	mode installation.
	Added handling of high and paranoid security levels.

2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: add eval around installing lexmark-driver
	(proprietary).

2001/09/17  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (pci_probe): log full pci probes

	* fs.pm (set_default_options): disable iocharset= and codepage= for
	supermount

2001/09/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: add eval around installing lexmark-driver
	(proprietary).

2001/09/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2001/09/17  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (pci_probe): log full pci probes

2001/09/16  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64

	* pkgs.pm (read_rpmsrate): fix bug

2001/09/16  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Fixed bug which prevented from printing the option list
	during install.
	Fixed bug which prevents printerdrake from running without PDQ
	installed.

2001/09/16  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
	more up to my need ALL flag in compssUsersChoice
	remove auto-install special case (initialisation of compssUsersChoice)

	* share/rpmsrate: 
	  - cleanup packages appearing twice in rpmsrate
	  - handle a few case of packages appearing twice
	  - special case for packages appearing in INSTALL section (flag
	dropped)
	  - new special flag ALL for compssUsersChoice

	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
	  - cleanup packages appearing twice in rpmsrate
	  - handle a few case of packages appearing twice
	  - special case for packages appearing in INSTALL section (flag
	dropped)
	  - new special flag ALL for compssUsersChoice

	* rescue/make_rescue_img: use new mkdir_p, rm_rf and cp_af from
	MDK::Common

2001/09/16  siegel

	* share/po/help_xml2pm.pl: added "systemitem"

2001/09/16  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Fixed bug which prevents printerdrake from running without
	PDQ installed.

2001/09/16  dam's  <damien@mandrakesoft.com>

	* mouse.pm, my_gtk.pm: bugfix + cosmetic changes

2001/09/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: updated help.pm file

	* share/po/hu.po: updated Hungarian file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/vi.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/bs.po, share/po/da.po, share/po/zh_TW.po,
	share/po/cs.po, share/po/af.po: updated pot file

2001/09/16  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: "please click on ..." for removable, nfs, smb.

	* fsedit.pm: enhance lvm handling (mostly standalone)
	  - cleanup & enhance raid mdstat reading (now works with or without
	devfs mounted)
	  - chunk size is buggy?

	* install_any.pm (getAndSaveAutoInstallFloppy): skip it on ia64
	more up to my need ALL flag in compssUsersChoice
	remove auto-install special case (initialisation of compssUsersChoice)
	use new mkdir_p, rm_rf and cp_af from MDK::Common

	* share/rpmsrate: 
	  - cleanup packages appearing twice in rpmsrate
	  - handle a few case of packages appearing twice
	  - special case for packages appearing in INSTALL section (flag
	dropped)
	  - new special flag ALL for compssUsersChoice

	* verify_c: add special case for c::to_utf8

	* pkgs.pm: more up to my need ALL flag in compssUsersChoice
	  - cleanup packages appearing twice in rpmsrate
	  - handle a few case of packages appearing twice
	  - special case for packages appearing in INSTALL section (flag
	dropped)
	  - new special flag ALL for compssUsersChoice
	use new mkdir_p, rm_rf and cp_af from MDK::Common

	* services.pm, install2.pm, lang.pm, commands.pm, loopback.pm,
	tinyfirewall.pm, raid.pm, keyboard.pm, printerdrake.pm, fs.pm, mouse.pm,
	network/netconnect.pm, timezone.pm, network/adsl.pm, install_steps.pm,
	any.pm, printer.pm, rescue/make_rescue_img, bootloader.pm: use new
	mkdir_p, rm_rf and cp_af from MDK::Common

	* diskdrake_interactive.pm, lvm.pm: enhance lvm handling (mostly
	standalone)

	* devices.pm (make): ensure it never returns a non-absolute name
	(it happened with make("foo") when cwd=/dev and /dev/foo existed)

2001/09/16  siegel

	* share/po/help_xml2pm.pl: added "systemitem"
	added commet explainig that help.pm is automatically generated.

	* .cvsignore: added .*.sw? for vim users

2001/09/16  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Added possibility to list command line
	options for the printers and to give the users help for printing
	Fixed bug of sometimes appearing the wron dialog after printing test
	pages

2001/09/15  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix options appearing twice in fstab

	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc

	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
	installs)

	* install_steps_auto_install.pm (enteringStep): do not translate in
	ja|ko|zh

2001/09/15  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix options appearing twice in fstab

	* install_steps.pm, any.pm, c/stuff.pm: i18n kdmrc

	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
	installs)

	* install_steps_auto_install.pm (enteringStep): do not translate in
	ja|ko|zh

2001/09/15  civileme

	* help.pm: Added a dialog in English for users selecting a printing system
	since no other
	OS seems to offer such a choice during install.

2001/09/15  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: better connection testing

	* network/tools.pm: more timeout

	* network/adsl.pm: avoid asking 2 times to restart the ethernet card

	* mouse.pm: readded darea realization

2001/09/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: make gtk-themes installed when Gnome is choosen

	* share/po/es.po: updated Spanish file

	* share/po/wa.po, share/po/hu.po: updated Hungarian file

2001/09/15  Pixel  <pixel@mandrakesoft.com>

	* Makefile.config, tools/Makefile: add aewm-drakx

	* install_steps_gtk.pm: makes cancel on mouse selection works even better
	  - add and use aewm-drakx
	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
	know they don't need keyboard focus
	  - add some more title to ease debugging (when aewm-drakx is in debug
	mode)

	* install_gtk.pm, tools/aewm-drakx/Makefile, tools/aewm-drakx/misc.c,
	tools/aewm-drakx/README: 
	  - add and use aewm-drakx
	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
	know they don't need keyboard focus
	  - add some more title to ease debugging (when aewm-drakx is in debug
	mode)

	* any.pm: i18n kdmrc
	fix user icons choice
	  - add and use aewm-drakx
	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
	know they don't need keyboard focus
	  - add some more title to ease debugging (when aewm-drakx is in debug
	mode)

	* install2.pm: don't warn if modules are missing when testing

	* bootloader.pm: find error in /tmp/.error only if exception is "xxx
	failed"
	(write_lilo_conf): ensure linear and lba32 are not both set

	* share/po/fake_c.pl: fix a tricky hack

	* my_gtk.pm: do the set_events before the show otherwise gtk go crazy (no
	more keyboard focus)

	* c/stuff.pm: i18n kdmrc

	* lang.pm (load_mo): ensure the locale is set (was broken in non-gtk
	installs)

	* install_steps_interactive.pm: fix typo
	find error in /tmp/.error only if exception is "xxx failed"
	makes cancel on mouse selection works even better
	fix cancel on mouse choice

	* install_steps.pm: i18n kdmrc
	enable supermount again

	* network/adsl.pm: correct dams typo

	* fs.pm (write_fstab): fix supermount moving from options to fstype

	* steps.pm: find error in /tmp/.error only if exception is "xxx failed"

	* tools/aewm-drakx/aewm.h, tools/aewm-drakx/client.c,
	tools/aewm-drakx/events.c, tools/aewm-drakx/aewm-drakx.c: set_focus on
	new map_request event (fix summary step)
	  - add and use aewm-drakx
	  - add some "skip" title on help/logo/steps windows so that aewm-drakx
	know they don't need keyboard focus
	  - add some more title to ease debugging (when aewm-drakx is in debug
	mode)

	* install_steps_auto_install.pm (enteringStep): do not translate in
	ja|ko|zh

2001/09/15  siegel

	* share/po/de.po: fixed another typo
	new string

	* printerdrake.pm: added missing _()

	* standalone/draksec: use " instead of ' to get i18n

	* standalone/draknet: fixed missing _()

2001/09/15  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added the PDQ panic button.
	Removed a superfluous "set_help" line.
	Save default spooler at program start, fixed typos in comments.
	Command line commands as "lpr", "lpq", ... are mapped to the correct
	spooler now.
	Fixed bug of a waiting message appearing together with a dialog
	Cleaned up variables to correctly switch between CUPS/Foomatic/Raw type
	for a printer

	* printer.pm: Added the PDQ panic button.
	Command line commands as "lpr", "lpq", ... are mapped to the correct
	spooler now.

	* standalone/printerdrake: Fixed bug of spooler choice via command line
	options being ignored.

2001/09/15  warly

	* share/rpmsrate: add drakfirsttime

2001/09/14  dam's  <damien@mandrakesoft.com>

	* printer.pm, printerdrake.pm: make test_pms happy

	* install_any.pm: pptp-adsl instead of pptp-adsl-fr

	* Xconfigurator.pm: no shadow when X test

	* standalone.pm: bugfix

	* my_gtk.pm: no icon if wizard
	no shadow when X test
	shadow color

	* bootlook.pm: bugfix
	iautologin correction

	* mouse.pm: trying to remove draw

	* network/adsl.pm: debug
	pptp-adsl instead of pptp-adsl-fr
	bugfix
	updated speedtouch handling.

2001/09/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: removed S3 ViRGE card from card with problem with
	frame buffer as it works fine.

	* Xconfigurator.pm: fixed filtering of depth for newt version.
	depth 24 is used for DRI for Rage 128 and Radeon instead of Depth 32 (as
	depth
	32 simply doesn't work, even if DRI guide says it works :-) 24 bit works
	fine
	for Rage 128.
	apply restriction on depth available when changing resolution, removed
	S3 ViRGE
	from experimental 3D accelerated card list as it really does not work,
	allow on
	second pass to change card configuration to choose server (experimental
	server
	are still only available to expert), added support for UseCCEFor2D for
	Rage 128
	card if a TV card is installed (set to true, else set to false), added
	support
	for Rage Mobility M... card that are Rage 128 Mobile chipset, improved
	error
	message display to catch only appropriate error message of XFree 4.1.0
	only,
	added support for 32 bits for DRI using Matrox card, improved info
	message with
	real version of XFree used (anybody) and identifier from PCI probe
	(expert).

2001/09/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/insmod-busybox/Makefile: clean also cleans the DIET target

	* mdk-stage1/Makefile, mdk-stage1/Makefile.mkinitrd_helper: back to using
	a reduced form of mkinitrd_helper for mkinitrd (only
	to provide a dietlibc-enabled static insmod)

2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po: updated Walloon file

	* share/po/ko.po: updated Korean file

	* share/po/da.po: updated Danish file
	updated Danish file

	* share/po/bs.po, share/po/sv.po: updated Bosnian and Swedish files

2001/09/14  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm, install_any.pm: when testing for bad drives, if
	opening for writing fails, remove the drive from the hard drive list
	(useful for Smartmedia readers)

	* pkgs.pm: update correctSize and invCorrectSize (now linear)

	* share/po/fr.po: fix odin bug (please run msgfmt before committing!)

	* share/rpmsrate: do not install Aurora in russian

2001/09/14  siegel

	* share/po/de.po: updates

	* standalone/drakautoinst: Check exisence of "/root/replay_install.img"
	before anything else ...

2001/09/14  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Added "set_help" lines for installer help texts.
	Raw queue entry added, so cursor not always on "Alps MD-1000" when no
	printer
	detected.
	Resolved conflict.
	Now it is checked whether the network is configured and running.
	draknet is called when the network is not configured.
	It is checked whether the spooler is automatically started at boot.
	The oki4daemon is started when needed.
	Lexmarks inkjet drivers are fully integrated.
	The permissions of the device files are set so that normal users can
	print with PDQ.

	* standalone/printerdrake: Fixed spooler selection by command line.

	* printer.pm: Raw queue entry added, so cursor not always on "Alps
	MD-1000" when no printer
	detected.
	Made network checking working on non-english systems.
	Now it is checked whether the network is configured and running.
	draknet is called when the network is not configured.
	It is checked whether the spooler is automatically started at boot.
	The oki4daemon is started when needed.
	Lexmarks inkjet drivers are fully integrated.
	The permissions of the device files are set so that normal users can
	print with PDQ.

2001/09/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po, share/po/tr.po: updated Turkish and Bulgarian files
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/eu.po, share/po/az.po,
	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/gl.po,
	share/po/ca.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/bs.po, share/po/da.po, share/po/zh_TW.po, share/po/cs.po,
	share/po/af.po: updated pot file

2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>

	* share/rpmsrate: added mt-st to ARCHIVING

2001/09/13  odin

	* share/po/fr.po: updated up to 6648

2001/09/13  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: new migration feature for creation of
	partitions on existing mount points

	* diskdrake.pm: 
	  - add back shortcuts
	  - red colored buttons in nfs/smb/removable

2001/09/13  dam's  <damien@mandrakesoft.com>

	* pixmaps/wiz_default_up.png, pixmaps/wiz_draknet.png: updated

	* my_gtk.pm: updated
	addde /usr/share/icons in path for pixmaps search
	shadow reduced to 5 pixels

	* standalone/draknet, network/isdn.pm: isdn timeout works now.

2001/09/13  Frederic Lepied  <flepied@mandrakesoft.com>

	* share/rpmsrate: added mt-st to ARCHIVING

2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
	trouble to XFree86 4.1.0.

	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
	fix for Matrox G550 support, now add DRI support.
	disable any question to user about XF3 if he choose a dual head
	configuration.
	disable DRI if Xinerama has been chosen.
	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
	Tseng ET6\d00.

	* install_any.pm: updates 3D category according Matrox G550 and Radeon
	card.

	* install_steps.pm: synced with Xconfigurator bad_card class of video card
	to avoid using frame
	buffer, added ET6\d00 style card which seems to have problem.

2001/09/13  odin

	* share/po/fr.po: updated up to 6648
	updated fr.po

2001/09/13  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: add krozat

	* any.pm (inspect): use a safer dir when standalone

	* install_steps.pm: extend disable KDE GreetString to
	ja|ko|zh|ru|th|vi|be|bg
	do not translate kdm GreetString in ja|ko|zh (what about ru?)
	in kdmrc GreetString, magic string HOSTNAME replaced by %n

	* diskdrake_interactive.pm: new migration feature for creation of
	partitions on existing mount points

	* diskdrake.pm: 
	  - add back shortcuts
	  - red colored buttons in nfs/smb/removable

	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
	the fly without rebooting on a device with some already mounted
	partitions)

	* install_steps_interactive.pm (selectKeyboard): don't prompt in newbie
	mode if >=90, not >90

2001/09/13  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: shadow reduced to 5 pixels

	* standalone/draknet, network/isdn.pm: isdn timeout works now.

2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fix for missing Xinerama for Matrox cards.
	fix for Matrox G550 support, now add DRI support.
	disable any question to user about XF3 if he choose a dual head
	configuration.
	disable DRI if Xinerama has been chosen.
	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
	Tseng ET6\d00.
	avoid creating /etc/X11/XF86Config* file if --g_auto_install.

	* services.pm: updated repartition of services into category, network
	category are commented so
	that service will to "Other" one.

	* Xconfigurator_consts.pm: removed ugly Modeline 1024x768 which causes
	trouble to XFree86 4.1.0.

	* install_any.pm: updates 3D category according Matrox G550 and Radeon
	card.

	* install_steps.pm: synced with Xconfigurator bad_card class of video card
	to avoid using frame
	buffer, added ET6\d00 style card which seems to have problem.

2001/09/13  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm: filtered the list from lang2keyboard to display only valid
	keyboards

	* c/stuff.xs.pm: add partition adding on the fly trick

	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
	the fly without rebooting on a device with some already mounted
	partitions)

	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
	about ru?)
	in kdmrc GreetString, magic string HOSTNAME replaced by %n

2001/09/13  dam's  <damien@mandrakesoft.com>

	* standalone/draknet, network/isdn.pm: isdn timeout works now.

2001/09/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* lang.pm: fixed bad $localedir in load_mo().

	* g_auto_install: updated so that this scripts is running again.

	* install2.pm: do not output error message for bad kernel if using
	--g_auto_install.

	* install_steps_interactive.pm: fixed Printer name reporting for a
	specific printer.

	* install_any.pm: updates 3D category according Matrox G550 and Radeon
	card.

	* services.pm: updated repartition of services into category, network
	category are commented so
	that service will to "Other" one.

	* live_install2: updated #! as ../perl is not used.

	* my_gtk.pm: synced with --g_auto_install mode.

	* install_steps.pm: synced with Xconfigurator bad_card class of video card
	to avoid using frame
	buffer, added ET6\d00 style card which seems to have problem.

	* Xconfigurator.pm: fix for Matrox G550 support, now add DRI support.
	disable any question to user about XF3 if he choose a dual head
	configuration.
	disable DRI if Xinerama has been chosen.
	updated Rage Mobility regexp for bad_card, added bad_card for XF4 as
	Tseng ET6\d00.
	avoid creating /etc/X11/XF86Config* file if --g_auto_install.
	synced with --g_auto_install mode.
	disable testing with all SiS card except SiS 630 under XF4.

2001/09/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/pl.po, share/po/pt.po, share/po/no.po,
	share/po/th.po, share/po/sr.po, share/po/sk.po, share/po/lt.po,
	share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/lv.po,
	share/po/uk.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
	share/po/id.po: updated pot file

2001/09/13  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm: filtered the list from lang2keyboard to display only valid
	keyboards

	* c/stuff.xs.pm: add partition adding on the fly trick

	* partition_table.pm: BLKPG_ADD_PARTITION support (aka adding partition on
	the fly without rebooting on a device with some already mounted
	partitions)

	* install2.pm (selectKeyboard): remove code causing
	install_steps::selectKeyboard to be skipped

	* install_steps.pm: do not translate kdm GreetString in ja|ko|zh (what
	about ru?)
	in kdmrc GreetString, magic string HOSTNAME replaced by %n

2001/09/12  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: typo
	new color for shadow
	corrected shadow handling
	no shadow if liveupdate

	* share/help.png: new help

	* mouse.pm: removed debug code

	* network/tools.pm, network/netconnect.pm, network/ethernet.pm,
	network/isdn.pm, network/adsl.pm, network/modem.pm: new default
	connection handling

	* standalone.pm: added wait message while installing package

2001/09/12  daouda

	* standalone/drakbug_report: add Mandrake release section

2001/09/12  fcrozat

	* share/rpmsrate: Fix gnome install

2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: removed obsolete --nocpi flag for install2.
	avoid probing usb device (for mouse) if --noauto is given.

	* install_steps.pm: disabled frame buffer for most of the SiS display card
	except SiS 630.

	* Xconfigurator.pm: added MGA G550 as always having two head.

	* live_install2: fix when switching perl version.

	* live_install: use system perl instead.

2001/09/12  gbeauchesne

	* share/list.ia64, share/list, share/list.i386: 
	  - list (/sbin/mkfs.jfs, /sbin/mkfs.xfs): Move to...
	  - list.i386: ... Here.
	  - list.ia64: Updates.

2001/09/12  odin

	* share/po/fr.po: updated fr.po

2001/09/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/zh_CN.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
	share/po/et.po, share/po/el.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/hr.po, share/po/vi.po, share/po/ca.po,
	share/po/gl.po, share/po/eo.po, share/po/help_xml2pm.pl, share/po/wa.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/hu.po,
	share/po/it.po, share/po/af.po: updated pot file

	* help.pm: new version with [ and ]

	* lang.pm: commented out utf-8 russian locale, for now

2001/09/12  Pixel  <pixel@mandrakesoft.com>

	* standalone/lsnetdrake: fix typo
	added wonderful lsnetdrake

	* modules.pm, install2.pm: display error when the kernel mismatch the
	modules

	* docs/README: explain how to get the boot kernels

	* install_steps_gtk.pm (choosePackagesTree): translate the categories

	* standalone/drakbug_report: cleanup

	* bootloader.pm (suggest): no "quiet" boot for smp and enterprise kernels
	(suggest): no "quiet" boot for smp and enterprise kernels
	allow grub even for more than 800MB

	* Makefile.drakxtools, Makefile.config: added wonderful lsnetdrake

2001/09/12  siegel

	* share/po/de.po: new & shiny verion

	* share/po/help_xml2pm.pl: fixed silly error
	added keycap patch

2001/09/12  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: corrected shadow handling
	no shadow if liveupdate
	table undef corrected
	removed shadows if standalone

	* standalone/drakgw, standalone/draknet: corrected wizard mode in newt
	mode

	* mouse.pm: removed debug code

	* network/netconnect.pm: corrected splash in non X mode

2001/09/12  daouda

	* standalone/drakbug_report: add Mandrake release section

2001/09/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* live_install2: fix when switching perl version.

	* live_install: use system perl instead.

2001/09/12  kjx

	* share/po/zh_CN.po: revison

2001/09/12  Pixel  <pixel@mandrakesoft.com>

	* docs/README: explain how to get the boot kernels

	* install_steps_gtk.pm (choosePackagesTree): translate the categories

	* standalone/drakbug_report: cleanup

	* bootloader.pm: allow grub even for more than 800MB

2001/09/11  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: removed useless print
	don't detect ethx if no autodetection.
	implement smarter checkboxes

	* mouse.pm: test updated
	mouse test worked

	* network/ethernet.pm: don't detect ethx if no autodetection.
	implement smarter checkboxes

	* pixmaps/arrow_down.xpm: pixmap corrected
	new arrows

	* pixmaps/arrow_up.xpm: new arrows

	* share/rpmsrate: added ibod
	added isdn-light

	* interactive_gtk.pm, my_gtk.pm: fear the shaped windows...

2001/09/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* help.pm: small fix

	* share/po/fr.po, share/po/de.po, share/po/DrakX.pot, share/po/hu.po,
	share/po/it.po: updated Hungarian file;
	updated pot file

2001/09/11  Pixel  <pixel@mandrakesoft.com>

	* Makefile (tar-drakxtools): remove the building of "help" for drakxtools

	* bootloader.pm: for lilo, do not have table=/dev/xxx if the device is not
	a primary
	partition (otherwise lilo dies)

2001/09/10  dam's  <damien@mandrakesoft.com>

	* network/modem.pm, network/ethernet.pm: detect_devices

	* standalone/net_monitor, network/network.pm: removed timeout:1 in
	resolv.conf, modified timeout scanning in draknet/net_monitor

	* install_gtk.pm, install_steps_gtk.pm: mouse test moved

	* mouse.pm: test_mouse moved

	* my_gtk.pm: added border
	window decorations
	no set_events if embedded

	* standalone/draknet: removed timeout:1 in resolv.conf, modified timeout
	scanning in draknet/net_monitor
	debug

	* standalone/mousedrake: don't fork the code

	* network/adsl.pm: debug
	debug

2001/09/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: updated g_auto_install() for newer printerdrake
	interface.

	* modules.pm, detect_devices.pm: moved modules::get_pcmcia_devices into
	detect_devices::pcmcia_probe.

	* mdk-stage1/init-data/msgboot-blank.img.bz2: initial release for
	blank.img floppy image.

	* install_steps_interactive.pm, mouse.pm: added hid type usb mouse
	support.

	* Xconfigurator_consts.pm: added some more ModeLine (1024x768 @ 97.6 Hz,
	1024x480 but not automatically used).

2001/09/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: plop
	some adjustements in Games section

2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/de.po: updated German file; added choice of
	various quotes in help_xml2pm.pl
	Updated pot file;
	removed translations that are too low on percentage.

	* share/po/zh_TW.po: updated Chinese file

	* share/po/ko.po: updated Korean file
	Updated pot file;
	removed translations that are too low on percentage.

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/no.po, share/po/fi.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/bs.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated pot file;
	removed translations that are too low on percentage.

	* share/po/help_xml2pm.pl: updated German file; added choice of various
	quotes in help_xml2pm.pl

2001/09/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: 
	  - make diskdrake work in embedded mode
	  - $my_gtk::pop_it used where it should

	* detect_devices.pm: fix ide-scsi appearing 2 times when standalone
	because both in /proc/ide
	and /proc/scsi/scsi

	* share/po/help_xml2pm.pl: s/my/our/ for $i18ned_... vars
	  - skip directories missing drakx-help.xml
	  - convert to the right charset (taken from $lang.po)
	  - rename help-*.po by help-*.pot
	  - fix typo in script removing $lang.po translations to favour
	help-*.pot

	* diskdrake.pm: 
	  - make diskdrake work in embedded mode
	  - $my_gtk::pop_it used where it should
	fix Umount and Mount when i18ned for nfs/smb
	don't display Wizard if wizard done before DrakX

	* share/po/Makefile, share/po/.cvsignore: 
	  - rename help-*.po by help-*.pot
	  - fix typo in script removing $lang.po translations to favour
	help-*.pot

2001/09/10  siegel

	* share/po/de.po: updates

2001/09/10  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Copying of PPD file when moving a CUPS (non-Foomatic) queue
	modified to not get
	interactive when overwriting a file.
	Comment put into non-Foomatic CUPS PPD files in /etc/cups/ppd/ to be
	able to
	  identify which PPD from /usr/share/cups/model was used (for
	auto-install).

2001/09/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, share/po/vi.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/bs.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: Updated pot file;
	removed translations that are too low on percentage.

2001/09/10  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile, share/po/.cvsignore, share/po/help_xml2pm.pl: 
	  - rename help-*.po by help-*.pot
	  - fix typo in script removing $lang.po translations to favour
	help-*.pot

2001/09/09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: probeall handling

2001/09/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: getAndSaveInstallFloppy: fix multiple cdrom issue

2001/09/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

	* share/po/sv.po: updated Swedish file

2001/09/09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (ejectCdrom): fix D state on exit

	* diskdrake_interactive.pm, install_interactive.pm, diskdrake.pm: 
	  - "Wizard" and "More" are back
	  - allow "Use for loopback" when there is already a loopback
	  - set the options on newly created partitions
	  - recompute_loopbacks called after modification of loopbacks, no more
	before reading
	  - restrict the lenght of the lines in partition description
	  - make loopback work

	* interactive_gtk.pm, interactive.pm, any.pm, interactive_newt.pm:
	clicked_may_quit used in place of clicked+exception to work-around
	perl-GTK bug (?)

	* share/po/i18n_compssUsers: ensure we're not adding a string already
	there (otherwise msgmerge yells)

	* share/po/help_xml2pm.pl, share/po/.cvsignore: xml help
	handling/enhancing for multi-langs

	* modules.pm: probeall handling
	(write_conf): switch to "probeall scsi_hostadapter ..."

	* share/po/Makefile: xml help handling/enhancing for multi-langs
	xml help handling/enhancing for multi-langs

	* partition_table.pm (get_normal_parts_and_holes): remove only small
	holes, not small partitions

	* fs.pm (set_default_options): remove iocharset=... for nfs (why was it
	there?)

2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fix some ortograf

	* share/rpmsrate: lvm not installed for everyone ?!

2001/09/08  Pixel  <pixel@mandrakesoft.com>

	* install_steps_auto_install.pm: force exitInstall to be non automatic

	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
	installs work again

2001/09/09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): switch to "probeall scsi_hostadapter ..."

2001/09/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fix some ortograf

	* share/rpmsrate: lvm not installed for everyone ?!

	* modules.pm: fix write_conf regarding /etc/modules so that (1) it doesn't
	flush it when
	it didn't decide to put any modules in it (to leave user's modules) (2)
	it
	doesn't remove the last line (3) it uses stronger regexp'es for
	substitution to not remove modules that have names made of other modules
	names subsets

2001/09/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/zh_TW.po: updated Chinese file

2001/09/08  Pixel  <pixel@mandrakesoft.com>

	* lang.pm: fix font in iso-15

	* modules.pm (write_conf): put "probeall scsi-hosts scsi_hostadapter ..."

	* interactive.pm: ugly workaround perl bug ([ID 20010908.008] memory leak
	with nested subs)

	* share/diskdrake.rc: change name

	* install_steps_auto_install.pm: force exitInstall to be non automatic

	* install_steps.pm, fs.pm, install_steps_interactive.pm, fsedit.pm,
	diskdrake_interactive.pm, install2.pm, diskdrake.pm: make loopback
	installs work again

	* timezone.pm: Asia/Taipei for Traditional Chinese

	* detect_devices.pm: remove debug code

2001/09/07  daouda

	* share/rpmsrate: add mdkonline (X 4)

2001/09/07  fcrozat

	* share/rpmsrate: Add grio500

2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
	result).
	fix all Matrox card used with XF4 which really does not like X in frame
	buffer
	(unable to restore frame buffer of DrakX).

2001/09/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/tree/etc/oem, rescue/guessmounts, rescue/list.i386,
	rescue/tree/etc/rc.sysinit: ext3, xfs, jfs

	* bootloader.pm: use -v for mkinitrd

	* share/po/fr.po: "reseaux" and plurals
	misc

	* share/rpmsrate: some work on games

2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po, share/po/vi.po: updated Vietnamese and Japanese files

2001/09/07  Pixel  <pixel@mandrakesoft.com>

	* Makefile: cleanup po

	* install_steps.pm: s|kdmrc|kdm/kdmrc|

	* lang.pm: fix load_mo call

	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help

	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
	disable_forced_fsck called for ext3 formatting
	(Type): disable fsck when migrated ext2->ext3

	* fs.pm: disable_forced_fsck called for ext3 formatting

2001/09/07  siegel

	* share/po/de.po: updates

2001/09/07  Till Kamppeter <till@mandrakesoft.com>

	* standalone/printerdrake, printer.pm, printerdrake.pm: Data structure
	fitted for auto-install to work
	Optimized program to be much faster
	Many more waiting messages
	Many bugfixes

2001/09/07  daouda

	* share/rpmsrate: add mdkonline (X 4)

2001/09/07  fcrozat

	* share/rpmsrate: Add grio500

2001/09/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fix card managed only by XF4 (may have some wrong
	result).
	fix all Matrox card used with XF4 which really does not like X in frame
	buffer
	(unable to restore frame buffer of DrakX).

2001/09/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* any.pm: Changed simple quote to double quote for a translatable string
	(otherwise
	it isn't seen)

	* share/po/es.po: updated Spanish file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/is.po, share/po/hu.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/no.po,
	share/po/fi.po, share/po/th.po, share/po/el.po, share/po/sk.po,
	share/po/lt.po, share/po/ar.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
	updated pot file

	* share/po/sv.po: updated Swedish file
	updated pot file

2001/09/07  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: s|kdmrc|kdm/kdmrc|
	remove the "konsole and gnome-terminal are lamers in exotic languages,
	link them to something better"

	* bootloader.pm (write_lilo_conf): fix typo

	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: new help

	* diskdrake_interactive.pm: disable_forced_fsck called for ext3 formatting
	disable_forced_fsck called for ext3 formatting
	(Type): disable fsck when migrated ext2->ext3

	* install_any.pm, keyboard.pm: cleanup

	* partition_table.pm, share/list: add xfs

	* fs.pm: disable_forced_fsck called for ext3 formatting

	* share/rpmsrate: add jfsprogs

2001/09/07  siegel

	* share/po/de.po: updates
	updates/fixes

2001/09/06  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/tools.pm: corrected speedtouch

	* install_gtk.pm: removed comments

2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
	XFree 4.1.0 is not bad, and
	all NVIDIA card are no more considered bad.

	* pkgs.pm: fixed retry of package 3 times everytime even if first install
	succeeded, now
	after first successfull install, go to next package to install.

	* install_steps.pm: removed some cards for allowing frame buffer.

2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: works now ;p

2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: 'zh' in LANGUAGE for Chinese is needed by DrakX
	corrected lang.pm to have coherence in locale usage (it was the source
	of much of the problems); changed keyboard.pm to ignore charset encoding
	in locale name for locale -> keyboard guessing.
	removed unused gconv modules, converted az.po to utf-8 (as it was the
	only
	remaining az.po on Earth still in a non standard encoding)

	* share/list, share/gen_locales.sh, share/locales-skeleton.tar.bz2,
	keyboard.pm, share/po/az.po: corrected lang.pm to have coherence in
	locale usage (it was the source
	of much of the problems); changed keyboard.pm to ignore charset encoding
	in locale name for locale -> keyboard guessing.
	removed unused gconv modules, converted az.po to utf-8 (as it was the
	only
	remaining az.po on Earth still in a non standard encoding)

2001/09/06  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: fix keyboard config + some cleanup
	cleanup (use /proc/self instead of /proc/$$)

	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
	keyboard config + some cleanup

2001/09/06  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/tools.pm: corrected speedtouch

	* install_gtk.pm: removed comments

2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: cleanup for bad card and prefer XF3, so now using
	XFree 4.1.0 is not bad, and
	all NVIDIA card are no more considered bad.
	avoid using @resolutions_laptop, now use only @resolutions, this means
	1400x1050
	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
	(so
	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
	file).

	* install_steps.pm: removed some cards for allowing frame buffer.
	fix log when configuring printer queue.

	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
	and
	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).

	* pkgs.pm: fixed retry of package 3 times everytime even if first install
	succeeded, now
	after first successfull install, go to next package to install.

	* install_any.pm: update printer data for g_auto_install.

2001/09/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: works now ;p

2001/09/06  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: fix keyboard config + some cleanup
	cleanup (use /proc/self instead of /proc/$$)

	* install_steps.pm, install_steps_interactive.pm, keyboard.pm: fix
	keyboard config + some cleanup

	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
	type

2001/09/06  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/tools.pm: corrected speedtouch

	* install_gtk.pm: removed comments
	new mouse test

2001/09/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: revert previous patch, this is not usable with current rpm as
	it complains if
	one the file has a modified MD5SUM against the header describing it in
	the
	hdlist, so this is most of the time useless.
	guess filename if the file is not found (for an rpm file during
	installation),
	so try with release incremented in such case (good for Cooker user or
	local
	tester using network installation).

	* install_steps.pm: fix log when configuring printer queue.

	* Xconfigurator.pm: avoid using @resolutions_laptop, now use only
	@resolutions, this means 1400x1050
	is available to other, use XFree86 4.1.0 builtin timings for 1400x1050
	(so
	1400x1050 is no more printed as modeline for XFree 4.1.0 configuration
	file).

	* Xconfigurator_consts.pm: added 1400, 1920 and 2048 for %min_hsync4wres.
	cleaned up a bit and using XFree86 4.1.0 builtin timings for 1400x1050
	and
	1920x1440, 2048x1536 has no modeline (but its min hsync is really high).

	* install_any.pm: update printer data for g_auto_install.

	* printerdrake.pm: revert previous commit.
	added a missing ifup lo, on some case (auto_install) it fails.

	* printer.pm: start ifup lo before starting service cups.

2001/09/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

	* share/po/ga.po, share/po/no.po: updated Irish and Norwegian files

2001/09/06  Pixel  <pixel@mandrakesoft.com>

	* share/diskdrake.rc, fsedit.pm, diskdrake.pm: add journalised in legend,
	fix the use

	* diskdrake_interactive.pm (Add2LVM): do not allow spaces in lvm names

	* fs.pm (merge_fstabs): correction allowing manual_fstab to not give the
	type

	* timezone.pm (ntp_server): fix (step-tickers was empty)

2001/09/05  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor, standalone/draknet: corrected opeions

	* standalone/mousedrake: typo
	updated

	* network/tools.pm: corrected initcript

	* pixmaps/mouse_middle.xpm, pixmaps/mouse_right.xpm,
	pixmaps/mouse_left.xpm: new pixmaps

2001/09/05  Pixel  <pixel@mandrakesoft.com>

	* standalone/diskdrake: fix function called

2001/09/05  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Set default printer (all spoolers), manual
	config (CUPS), bugfixes, clean-ups.

2001/09/05  dam's  <damien@mandrakesoft.com>

	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png,
	pixmaps/wiz_drakgw.png: new icons

	* share/themes-mdk.rc: updated theme

	* standalone/draknet: interface display corrected

	* share/themes/mdk-button4.png, share/themes/mdk-button1.png: new buttons

	* install_gtk.pm: 2 sec without sensitives buttons

	* network/netconnect.pm: only if standalone

	* pixmaps/network.png, pixmaps/bootloader.png, pixmaps/printer.png,
	pixmaps/security.png, pixmaps/rootpasswd.png, pixmaps/harddrive.png,
	pixmaps/keyboard.png, pixmaps/X.png, pixmaps/mouse.png,
	pixmaps/bootdisk.png: new pixmaps

2001/09/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed display of XFdrake test image (fcrozat).

	* install_steps.pm: fixed typo preventing removable devices to be seen in
	/etc/fstab.
	fixed configurePrinter (used for auto_install).

	* install_steps_interactive.pm: avoid asking when using existing partition
	for magic partition with a real
	mntpoint (typically /tmp/hdimage) if we are not using a ramdisk (so
	partition is
	not unmountable).

	* bootloader.pm: removed yvounet sucking, handle Mandrake lilo or unknown
	lilo.

	* fs.pm: fix bad creation of /mnt/hd for an hd installation without
	ramdisk.
	support setting /tmp/hdimage in /etc/fstab even if memory is low (not
	using ramdisk).

	* install_any.pm: filtering $o->{printer} for g_auto_install().
	allow installing urpmi on hd install even if low memory (so not using
	ramdisk).

	* diskdrake_interactive.pm: Do not use for loopback of magic partition
	(/tmp/hdimage).

2001/09/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/i386/busybox: hopefully fix the _ problems with busybox 0.60.1

2001/09/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bs.po: updated Bosnian file

	* share/po/uk.po: updated Ukrainian file

2001/09/05  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: use EISA_ID in more cases to have the name
	non-case dependent EISA comparison
	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
	there, but not the [hv]syncrange

	* Xconfig.pm: fix typos
	non-case dependent EISA comparison
	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
	there, but not the [hv]syncrange

	* modules.pm: favor tmscsim over AM53C974

	* tools/ddcprobe/ddcxinfos.c: fix for cards giving bad info
	also try EISA ID to auto-detect the monitor (sometimes the EISA ID is
	there, but not the [hv]syncrange

	* standalone/diskdrake: fix function called

2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(

2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/eo.po, share/po/bs.po, share/po/ro.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
	Updated Danish file; updated pot file

2001/09/04  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix typo

2001/09/04  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Fitted to the new Foomatic version.
	Fixed bug of spooler change only working when language is English.

2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fix bad vga= which go for some install.

2001/09/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* network/netconnect.pm: small english change

	* mdk-stage1/probing.c: Compaq mescouilles has changed proc stuff

	* share/rpmsrate: tetex-doc

	* mdk-stage1/mount.c: reflect scd -> sr here too, /me sucks :-(

2001/09/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/cy.po, share/po/nl.po, share/po/wa.po, share/po/is.po,
	share/po/hu.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/bs.po,
	share/po/da.po, share/po/zh_TW.po, share/po/cs.po, share/po/af.po:
	Updated Danish file; updated pot file

	* share/po/ja.po: updated Japanese file

2001/09/04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (add_alias): use "above" instead of "post-install"

	* partition_table.pm: re-add JFS

	* fsedit.pm, common.pm, bootloader.pm: 
	  - don't expand symlinks in grub's menu.lst
	  - better use of /proc/partitions verification

	* detect_devices.pm (getCompaqSmartArray): add yet another location for
	cpqarray location

	* fs.pm: fix typo
	mount ext3 as ext2 during install for speed up

2001/09/04  fcrozat

	* share/rpmsrate: Add plugins for KDE and Mozilla

2001/09/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fix bad vga= which go for some install.

	* pkgs.pm: cleanup to avoid invalid file error.

2001/09/04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (add_alias): use "above" instead of "post-install"

	* fs.pm: mount ext3 as ext2 during install for speed up

	* partition_table.pm: re-add JFS

	* fsedit.pm, common.pm, bootloader.pm: 
	  - don't expand symlinks in grub's menu.lst
	  - better use of /proc/partitions verification

	* detect_devices.pm (getCompaqSmartArray): add yet another location for
	cpqarray location

2001/09/04  yduret

	* my_gtk.pm: emebedded mode fix

	* interactive_gtk.pm, diskdrake.pm: embedded mode fix

2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: unfuzzy-ise a few things, translate a few things

2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po: updated Korean file

2001/09/03  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: fix for lvm (non-)creation of devices

2001/09/03  yduret

	* my_gtk.pm, diskdrake.pm: fix Embedded mode

2001/09/03  dam's  <damien@mandrakesoft.com>

	* network/network.pm: added timeout in resolv.conf

2001/09/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: updated to use new urpmi.cfg format for install_urpmi,
	make sure the directory
	is not given for ftp and http install ($dir).

	* Xconfigurator_consts.pm: added 1920x1440 and 2048x1536.

	* Xconfig.pm: make sure a staling Mouse2 is not present unless it really
	physically exists.

2001/09/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: add axnet_cs to pcmcia category

	* mdk-stage1/probing.c: change `scd' with `sr'

2001/09/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/es.po: updated Spanish file

	* share/po/ko.po: updated Korean file

2001/09/03  Pixel  <pixel@mandrakesoft.com>

	* timezone.pm (ntp_server): also set /etc/ntp/step-tickers

	* fsedit.pm, devices.pm: fix mtab reading and pseudo-device use

	* interactive_gtk.pm: better sizing for combo boxes

	* install_steps_interactive.pm (choosePartitionsToFormat): do not propose
	to propose already formatted
	fat partitions

	* share/list: those files disappeared ??

	* fs.pm: fix for lvm (non-)creation of devices
	(set_default_options): created
	fix mtab reading and pseudo-device use

	* diskdrake.pm (smb_create, nfs_create): make the "New" button work
	(raw_hd_mount_point): fix checking the same mount point
	(try_): fix error displaying

	* partition_table.pm: fix switching to 0x85 extended when
	remove_empty_extended is called

2001/09/03  yduret

	* standalone/net_monitor: sync with new logdrake command line options

2001/09/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bs.po: updated bosnian file
	Added Bosnian file

2001/09/01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: avoid deleting package from %packages in install() when closing
	fd associated,
	if the open is called again (?), it will cause an invalid file (seems to
	happens
	on some invalid file).

2001/08/31  dam's  <damien@mandrakesoft.com>

	* standalone/draksec: corrected yesno interpretation
	libsafe modification

	* network/netconnect.pm: corrected profil recording for modem

	* standalone/net_monitor: correted typo

	* network/ethernet.pm: corrected zero return when cable configuring

	* any.pm: corrected autologin : no uc anymore

	* network/modem.pm: added domainname2 setting

	* share/logo-mandrake.png: new logo

2001/08/31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added missing AlwaysCore line for second mouse for
	XF3.

	* mouse.pm: added missing AlwaysCore line for second mouse in XF3.

	* standalone.pm: add option --allow-medium-change to force asking question
	even if --auto is
	given on command line of urpmi, for installing package so that a dialog
	appears.

2001/08/31  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: mures is a fine game, have it at weight "4" under GAMES
	section
	have "numlock" in INSTALL because it's the only package which goes to
	CD#2
	when you unselect all groups, so having it here will allow not changing
	CD
	with this kind of small install

2001/08/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/uk.po, share/po/es.po: updated Ukrainian
	and Spanish files

	* share/po/sv.po: updated Swedish file
	updated Ukrainian and Spanish files

2001/08/31  siegel

	* share/help_sav.png: not used any more

	* share/po/de.po: updates

	* share/logo-mandrake2.png, share/logo-mandrake_trans.png,
	share/logo-mandrake_sav.png, share/logo-mandrake-Desktop.png: old
	versions => not in use any more

2001/08/31  yduret

	* bootlook.pm: updated code

2001/08/30  dam's  <damien@mandrakesoft.com>

	* network/tools.pm: nicer display

	* standalone/draknet: added use common.pm (can be usefull, eh?)

	* network/network.pm: silently /sbin/ip
	track_network_id only if laptop

2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: Updated Danishfile
	updated pot file (I had lost the group descriptions, sorry, they are
	back now)
	moved chinese files to charset independent names

	* share/po/be.po, share/po/sp.po, share/po/zh_CN.po, share/po/pt.po,
	share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po,
	share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/zh_TW.po, share/po/cs.po, share/po/af.po: updated pot file (I
	had lost the group descriptions, sorry, they are back now)
	moved chinese files to charset independent names

2001/08/30  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (read): it works now

	* help.pm: fixed (was utf8)

	* install_steps_gtk.pm (new): call interactive_gtk::new

	* install_steps.pm, Xconfigurator.pm: disable gpm (in case of serial
	mouse) before service choice

	* pkgs.pm (naughtyServers): update for 8.1

2001/08/30  dam's  <damien@mandrakesoft.com>

	* interactive.pm: corrected icon display

	* my_gtk.pm: new wizard

	* interactive_gtk.pm: corrected wizard mode display height/width

	* standalone/draknet: added draknet client installation

	* network/network.pm: track_network_id only if laptop
	dhcp package installation

	* pixmaps/wiz_default_left.png: new logo

2001/08/30  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mouse.pm: make sure to update all symlink according to any mouse (max 2)
	probed.
	fix previous fixes on mouse::write_conf

	* standalone/mousedrake: fix previous fix (typo).
	keep mouse specific paramater if user does not change its mouse.
	make sure --auto is not interactive on some part.
	use default value for port device if a serial mouse.

	* printer.pm: fixed foomatic failed (no lo up since ifup lo don't run)

	* Makefile: ugly to make sure standalone/pixmaps is not here when building
	tar-drakxtools.

	* Xconfig.pm: when reading existing configuration for mouse, update
	type|name for second mouse too.
	make sure default to set 3 for nbuttons for getinfoFromXF86Config for
	second
	mouse if this mouse has 3 buttons.

	* Xconfigurator.pm: for single heads mode, no screen id should be set in
	file (or XFree is going
	mad, but he is right, no ?)

	* install_any.pm: if a medium is refused, get rid of it definitively until
	it is accepted again.

2001/08/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps_interactive.pm: have a wait_message during installation of
	bootloader

	* mdk-stage1/pcmcia/pcmcia_probe.c: import new PCI ID's for more PCMCIA
	Controllers, from probe.c-1.54 of pcmcia-cs-3.1.28

2001/08/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po, share/po/vi.po, share/po/es.po: updated Japanese,
	Spanish and Vietnamese files

2001/08/30  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: allow LVM on RAID

	* help.pm: fixed (was utf8)

	* any.pm: cleanup

	* pkgs.pm (naughtyServers): update for 8.1

	* lang.pm (read): it works now

	* fs.pm (set_default_options): "ro" for cdroms, "user" for vfat only if
	removable
	media

	* share/po/Makefile: fix utf8 translation of xml file

	* interactive_gtk.pm: fix&cleanup window size

	* tools/Makefile: cleanup unneeded stuff

2001/08/30  siegel

	* share/po/de.po: new german version

2001/08/30  warly

	* share/rpmsrate: add koffice-i18n diald vlan-utils

2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw, standalone/drakautoinst: quit_global

	* share/po/fr.po: minor fix

2001/08/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: fix language selection

	* c.pm: better error message when function c::foo() is missing

	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
	in /)

2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed if undef encountered in depslist when installing package
	(traversing
	depslist as $depOrder).

2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw, standalone/drakautoinst: quit_global

	* share/po/fr.po: minor fix

2001/08/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: fix language selection

	* c.pm: better error message when function c::foo() is missing

	* install_steps_gtk.pm (installPackages): have Ok button by default for
	asking for changing CD

	* bootloader.pm (mkbootdisk): cleanup

	* rescue/dirs, rescue/make_rescue_img: make it work (do not have the dev
	in /)

	* devices.pm: remove fd0H1440 and fd1H1440

	* modules.pm: remove "msdos"

2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
	already defined.

	* standalone/mousedrake: try to merge already existing mouse configuration
	with what has been probed,
	change if mouse is really changed as probe is incomplete.

	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.

	* pkgs.pm: fixed if undef encountered in depslist when installing package
	(traversing
	depslist as $depOrder).

2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw, standalone/drakautoinst: quit_global

	* share/po/fr.po: minor fix

2001/08/29  Pixel  <pixel@mandrakesoft.com>

	* c.pm: better error message when function c::foo() is missing

	* keyboard.pm (loadkeys_files): fixed

	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
	Makefile.config: add localedrake (not tested)

	* rescue/make_rescue_img: make it work (do not have the dev in /)
	cleanup, speedup, use mknod for devices

	* install_steps_gtk.pm (installPackages): have Ok button by default for
	asking for changing CD

	* rescue/devices.pl, rescue/list: cleanup, speedup, use mknod for devices

	* bootloader.pm (mkbootdisk): cleanup

	* rescue/dirs: make it work (do not have the dev in /)

	* devices.pm: remove fd0H1440 and fd1H1440

	* modules.pm: remove "msdos"

2001/08/29  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/tools.pm, share/rpmsrate: speedtouch
	configuration

2001/08/29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mouse.pm: improved write_conf to enable multi-mice if only once mice is
	already defined.

	* install_steps.pm: add support for mandatory frame buffer support (SiS
	630) need them for XF3 to
	work properly, XF4 does work with it nicely.

	* Xconfigurator.pm: make sure Port entry for wacom is placed first.

	* standalone/mousedrake: try to merge already existing mouse configuration
	with what has been probed,
	change if mouse is really changed as probe is incomplete.

	* Xconfig.pm: improve getinfoFromXF86Config for mouse parameters.

2001/08/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: games

2001/08/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po, share/po/DrakX.pot, share/po/es.po: updated Danish file

2001/08/29  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, install_any.pm, fsedit.pm, diskdrake.pm: try to better handle
	symlinks device and devfs devices

	* install_steps_interactive.pm, standalone/localedrake, lang.pm, any.pm,
	Makefile.config: add localedrake (not tested)

	* install_steps.pm: no need to have devfs=nomount anymore in root raid
	do not modify fstab options in upgrade

	* keyboard.pm (loadkeys_files): fixed
	fix DISABLE_WINDOWS_KEY state handling (for upgrade), cleanup

	* diskdrake_interactive.pm: try to better handle symlinks device and devfs
	devices
	(main): fix
	(Create): fix typo causing primaryOrExtended to be ignored

	* rescue/devices.pl, rescue/make_rescue_img, rescue/list: cleanup,
	speedup, use mknod for devices

	* c/stuff.xs.pm, detect_devices.pm: better floppy detection/info

2001/08/28  dam's  <damien@mandrakesoft.com>

	* interactive.pm, install2.pm: corrected icon handling

	* services.pm: added cupslpd in printing section

2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile.config: really fix typo...
	fixed typo.

2001/08/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po: updated Czech file

2001/08/28  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: remove the temporary file /tmp/autoinst.img

	* install_steps.pm, install_steps_interactive.pm: propose to format / and
	/usr even if isFormatted. More generally do not trust isFormatted to
	show which partitions to format

2001/08/28  siegel

	* ChangeLog, keyboard.pm: 
	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
	if no laptop is detected (= give users the chance to know about the
	existence of this variable).

2001/08/28  yduret

	* standalone/diskdrake: embedded mode nicer

2001/08/28  dam's  <damien@mandrakesoft.com>

	* interactive.pm, install2.pm: corrected icon handling

2001/08/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/list: added /sbin/e2fsck

	* share/aliases: added fsck.ext2 -> e2fsck (now in list file)
	removed e2fsck.shared as e2fsprogs now provide a shared version instead
	of a
	static one.

	* Makefile.config: really fix typo...
	fixed typo.
	removed reference to e2fsck.shared (now use e2fsck from package which is
	shared
	since 1.23-2mdk).

2001/08/28  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: remove the temporary file /tmp/autoinst.img

2001/08/28  siegel

	* ChangeLog, keyboard.pm: 
	  - keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard
	if no laptop is detected (= give users the chance to know about the
	existence of this variable).

2001/08/28  yduret

	* standalone/diskdrake: embedded mode nicer

2001/08/28  Stefan Siegel  <siegel@mandrakesoft.com>

	* keyboard.pm: write DISABLE_WINDOWS_KEY=no in /etc/sysconfig/keyboard 
	if no laptop is detected (= give users the chance to know about
	the existence of this variable).

2001/08/28  dam's  <damien@mandrakesoft.com>

	* mouse.pm: typo

2001/08/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: default the licence agreement to "Refuse"

	* standalone/drakboot: security fix and various
	move to all_hds stuff

	* c/stuff.xs.pm, bootloader.pm: security fix and various

2001/08/28  warly

	* share/rpmsrate: move libsafe to SERVER_OTHER 2
	added prelude, libsafe...

2001/08/28  yduret

	* standalone/drakxconf: readded dsikdrake
	added new items, remove some old ones

2001/08/27  dam's  <damien@mandrakesoft.com>

	* network/network.pm: corrected hwaddr setting and draknet first window
	display
	corrected typo

	* network/netconnect.pm: corrected hwaddr setting and draknet first window
	display

2001/08/27  dam's  <damien@mandrakesoft.com>

	* network/network.pm: corrected hwaddr setting and draknet first window
	display
	corrected typo

	* network/netconnect.pm: corrected hwaddr setting and draknet first window
	display

2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files

2001/08/27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: nicer help display

	* share/keyboards.tar.bz2: fix the rights

	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC

2001/08/27  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: corrected bad window size

	* network/network.pm: make it compile
	corrected hwaddr stuff
	added HWADDR

	* network/tools.pm: corrected internet initscript

	* any.pm, mouse.pm: make it compile
	add_devfslink

2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
	Added Latvian keyboard

	* share/keyboards.tar.bz2: Checked and updated xmodmap files for DrakX

	* share/po/sk.po, share/po/eu.po: updated Basque and slovak files

2001/08/27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm: nicer help display

	* diskdrake.pm: use empty hash instead of the raid/loopback array

	* c/stuff.xs.pm (setlocale): do not set LC_NUMERIC

2001/08/27  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: corrected bad window size

	* network/network.pm: added HWADDR

	* network/tools.pm: corrected internet initscript

2001/08/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm, standalone/draknet, network/modem.pm: added Borsenkow Andrej
	patch to support CHAP again.

2001/08/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, keyboard.pm: Added "zh_HK" to Chinese in LANGUAGE list.
	Added Latvian keyboard

2001/08/27  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: use empty hash instead of the raid/loopback array

2001/08/26  warly

	* share/rpmsrate: add some important packages

2001/08/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakautoinst: require -> use

	* install_any.pm: save the .img file so that multi-cd install won't ask to
	re-enter first cd

2001/08/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

2001/08/26  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile, share/po/.cvsignore: fetch directly the latest
	drakx-help.xml

2001/08/25  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakbug_report: add "rpm -qa"

	* bootlook.pm: fix deprecated call standalone::pkgs_install

	* diskdrake.pm: don't the grab flag propagate everywhere

2001/08/25  dam's  <damien@mandrakesoft.com>

	* install2.pm, steps.pm: icon correction

2001/08/25  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (mount): accept mounting iso9660 filesystem as it should be
	(write_fstab): enable mounting more than one swap :)

	* bootlook.pm: fix deprecated call standalone::pkgs_install

	* install_steps.pm: added the missing security parameter to
	set_default_options

	* diskdrake.pm: don't the grab flag propagate everywhere

2001/08/24  dam's  <damien@mandrakesoft.com>

	* pixmaps/mouse_3b_mini.xpm, pixmaps/mouse_3b+.xpm, pixmaps/mouse_3b.xpm,
	pixmaps/mouse_3b+_mini.xpm: mini pixmaps, and lower color res for normal
	pix

	* standalone/mousedrake: updated mouse test

2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
	uncompressing of ramdisk will rulz now

	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
	parameter provided in network steps

	* mdk-stage1/probing.c: 
	  - descr of proc files
	  - fix small typo (segfault or not segfault? that's the question)
	enable install from Compaq Smart Array

	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
	than gcc statically

	* mdk-stage1/tools.c, mdk-stage1/mount.c: enable install from Compaq Smart
	Array

2001/08/24  Pixel  <pixel@mandrakesoft.com>

	* tools/pcmcia_config.patch: update the patch

	* Makefile (test_pms): make perl_checker skip help.pm
	ensure no .orig are generated when the pcmcia patch is applied

	* tools/make_mdkinst_stage2: give a little more free space (esp. for
	russian lang)

	* lang.pm, share/gen_locales.sh: no need for UTF-8/LC_CTYPE

	* share/po/help_xml2pm.pl, share/po/Makefile, help.pm: auto-generates
	help.pm from xml doc done by doc team

2001/08/24  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm: bugfix, speedtouch help

	* standalone/mousedrake: updated mouse test

2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fixed possible bug (not sorted partition when calling
	mount_part).

	* install_any.pm: fixed hdInstallPath for an hd installation without
	usingRamdisk (not installing
	urpmi in such case).
	updated packages to copy for printerdrake, removed almost obsoletes
	XFree86
	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
	3DLabs)
	which means user will have to change CD back to CD#1 if he a such a
	card.
	removed obsolete code for cond_remount and cond_umount and update
	hdInstallPath
	for hd installation.

	* diskdrake_interactive.pm: fixed typo common::usingRamdisk() instead of
	common::useRamdisk().
	take care mount point action is available for the hd installation
	partition only
	if a ramdisk is used (as it can be unmounted).
	use more global isMagicPart instead of isInstallHdPart.
	added real_mntpoint documentation and take care of hd install partition
	for
	available actions.

	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
	partition.
	fixed partition never seen as mounted, added special case for
	real_mntpoint to
	remount magic partition on the right place.

2001/08/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/libstdio/fdglue.c: fix this dietlibc... hope the
	uncompressing of ramdisk will rulz now

	* mdk-stage1/automatic.c: revert my auto->interactive patch

	* mdk-stage1/network.c: allow unsetting of automatic mode if not enough
	parameter provided in network steps

	* mdk-stage1/dietlibc/Makefile, mdk-stage1/bzlib/Makefile: use CC rather
	than gcc statically

	* mdk-stage1/tools.c, mdk-stage1/mount.c, mdk-stage1/probing.c: enable
	install from Compaq Smart Array

2001/08/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/locales-skeleton.tar.bz2, share/fonts.tar.bz2, keyboard.pm:
	enabling euro and utf-8 for some languages; added unicode font

2001/08/24  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: remove the cond_umount_hdimage and
	cond_remount_hdimage

	* tools/pcmcia_config.patch: update the patch

	* lang.pm: no need for UTF-8/LC_CTYPE
	(load_mo): if not usingRamdisk, don't try getFile

	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
	cond_remount_hdimage
	(Done): do not write fstab nor ask about it in install

	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'

	* Makefile: ensure no .orig are generated when the pcmcia patch is applied

	* partition_table.pm (write): do not die when real_mntpoint fs fail to
	unmount/remount, just log
	(write): unmount+remount real_mntpoint before doing the kernel_read

	* share/gen_locales.sh: no need for UTF-8/LC_CTYPE

	* pkgs.pm: fix "invalid file"

2001/08/24  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: speedtouch configuration

	* my_gtk.pm: gtk_create_xpm handles no absolute xpm path

	* pixmaps/mouse_3b+.xpm, pixmaps/mouse_middle.xpm, pixmaps/mouse_3b.xpm:
	added new mouse pixmap for mousedrake

	* network/adsl.pm: bugfix, speedtouch help
	added aliases for speedtouch stuff
	speedtouch configuration
	removed adsl detectioin, once again.

	* standalone/mousedrake: no absolute pixmap reference
	new mousedrake. experimental

	* network/tools.pm: speedtouch configuration
	export write_initscript, correct initscript.

2001/08/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fixed possible bug (not sorted partition when calling
	mount_part).

	* diskdrake_interactive.pm: take care mount point action is available for
	the hd installation partition only
	if a ramdisk is used (as it can be unmounted).
	use more global isMagicPart instead of isInstallHdPart.
	added real_mntpoint documentation and take care of hd install partition
	for
	available actions.

	* install_any.pm: fixed hdInstallPath for an hd installation without
	usingRamdisk (not installing
	urpmi in such case).
	updated packages to copy for printerdrake, removed almost obsoletes
	XFree86
	3.3.6 servers (8514, AGX, Mach32, Mach8, Mono, P9000, W32, I128, VGA16,
	3DLabs)
	which means user will have to change CD back to CD#1 if he a such a
	card.
	removed obsolete code for cond_remount and cond_umount and update
	hdInstallPath
	for hd installation.

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2,
	mdk-stage1/init-data/msgboot.img.bz2: updated with latest 8.1 pictures
	and updated documentation.

	* fs.pm: take care of using ram disk to remap mntpoint of hd installation
	partition.
	fixed partition never seen as mounted, added special case for
	real_mntpoint to
	remount magic partition on the right place.

2001/08/24  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (write): do not die when real_mntpoint fs fail to
	unmount/remount, just log
	(write): unmount+remount real_mntpoint before doing the kernel_read

	* install_steps.pm: remove the cond_umount_hdimage and
	cond_remount_hdimage

	* diskdrake_interactive.pm: remove the cond_umount_hdimage and
	cond_remount_hdimage
	(Done): do not write fstab nor ask about it in install

	* lang.pm (load_mo): if not usingRamdisk, don't try getFile

	* fs.pm (mount): allow to mount 'proc' and 'usbdevfs'

2001/08/24  siegel

	* share/po/de.po: New & shiny german version

2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

	* share/po/el.po: updated Greek file

2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

2001/08/23  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: at_boot connection,resolvconf in profiles

	* standalone/draksec: addedlibsafe option

	* network/adsl.pm: restart network after having tested adsl. experimental

2001/08/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: removed unusefull greping when building package
	tree.

2001/08/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: work on GAMES section

2001/08/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/lv.po: updated Latvian file

2001/08/23  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (cond_umount_hdimage): do not unmount /tmp/hdimage if not
	using ramdisk
	(disable_user_view): damned kdmrc moved

	* diskdrake_interactive.pm: cancel at startup will now exit
	ask wether to save fstab
	(part_possible_actions): have "Mount point" first to please fpons

	* fs.pm: keep the freq&passno of /etc/fstab

	* tools/i386/netboot/menu.lst.example,
	tools/i386/netboot/make_boot_network,
	tools/i386/netboot/automatic.para.default: as we now have
	menu.lst.example, i remove automatic.para for more flexibility

	* lang.pm: fix locale support when usingRamdisk

2001/08/22  anoncvs

	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
	<dxiaoming@mandrakesoft.com>
	Updated chinese (simplied) translation.

2001/08/22  Pixel  <pixel@mandrakesoft.com>

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R

	* network/nfs.pm: pleac perl_checker

	* interactive_gtk.pm: more intelligent setting back the selected value in
	the clist and ctree
	(done already for entry)
	  - fix entries editing causing the cursor to go to the end of line
	  - select the text

	* c/stuff.xs.pm, install_steps.pm, pkgs.pm: do init_db inside pkg_inside
	otherwise LOG is closed and rpmlib tries to write in it and ...

2001/08/22  anoncvs

	* share/po/zh_CN.GB2312.po: * Wed Aug 22 2001 DU Xiaoming
	<dxiaoming@mandrakesoft.com>
	Updated chinese (simplied) translation.

2001/08/22  fabman

	* share/po/es.po: updated spanish .po files for DrakX and drakbootdisk

2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
	entries are not given

	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
	but ramdisk Read Only

2001/08/22  Pixel  <pixel@mandrakesoft.com>

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: fix ru KOI8-R

	* bootlook.pm: fix typo

	* network/nfs.pm: pleac perl_checker

	* install_steps.pm: do init_db inside pkg_inside otherwise LOG is closed
	and rpmlib tries to write in it and ...
	do not call configurePrinter if no printer is wanted

	* interactive_gtk.pm: more intelligent setting back the selected value in
	the clist and ctree
	(done already for entry)
	  - fix entries editing causing the cursor to go to the end of line
	  - select the text

	* c/stuff.xs.pm, pkgs.pm: do init_db inside pkg_inside otherwise LOG is
	closed and rpmlib tries to write in it and ...

2001/08/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: fixed int and float checking which should accept
	negative number (added explicit
	positive too), cleaned code for some perl idioms.

	* install_steps.pm: updated configurePrinter to use foomatic printer
	configuration.

2001/08/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/automatic.c: don't stay automatic for ask_from_entries when
	entries are not given

	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/cdrom.c,
	mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/mount.h,
	mdk-stage1/network.c, mdk-stage1/modules.c, mdk-stage1/disk.c: mount all
	but ramdisk Read Only

2001/08/22  kjx

	* share/po/zh_CN.GB2312.po: review
	review

2001/08/22  Pixel  <pixel@mandrakesoft.com>

	* bootlook.pm: fix typo

	* install_steps_auto_install.pm: don't have formatPartitions interactive
	by default

	* install_steps.pm: do not call configurePrinter if no printer is wanted

2001/08/22  siegel

	* share/po/de.po: new german version

2001/08/21  dam's  <damien@mandrakesoft.com>

	* Makefile: added rpcinfo to the tar
	corrected bad Makefile : rpcinfo-flushed.c comes from tools.

	* standalone/draknet: ergonomy correction

	* network/tools.pm: corrected qq bug
	corrected bug

	* standalone/net_monitor: log updatede
	removed memoty leak
	time connection label

2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: moved installation code of foomatic (only)
	if a printer may be chosen.

	* install_any.pm: fixed hd installation for urpmi.

	* printerdrake.pm: slight rewrite of some perl idioms.

2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po: updated Walloon file
	updated pot file

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

2001/08/21  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: add telnet-client-krb5 and ftp-client-krb5

	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
	install

	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot

	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory

	* install_any.pm: cleanup

	* install_steps_interactive.pm: fix '$' in i18n message

2001/08/21  siegel

	* share/po/de.po: new german version

2001/08/21  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: removed memoty leak
	time connection label

	* network/tools.pm, network/modem.pm, network/netconnect.pm,
	network/ethernet.pm, network/isdn.pm: generik internet initscript, planq
	the children again

	* network/adsl.pm: speedtouch config
	generik internet initscript, planq the children again

2001/08/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed hd installation for urpmi.

2001/08/21  kjx

	* share/po/zh_CN.GB2312.po: review

2001/08/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

2001/08/21  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: fix spelling error

	* install_any.pm: cleanup
	install hotplug if usb (i kept usbd just in case)

	* diskdrake_interactive.pm (Create): force no sorting on filesystems,
	editable mount points

	* install_steps.pm: try to fix umount/remounting /tmp/hdimage in hd
	install

	* Makefile, share/po/Makefile: check presence of '$' in DrakX.pot

	* install_steps_interactive.pm: fix '$' in i18n message

	* fs.pm (read_fstab): don't expand symlink if the link goes in a directory
	umask=0 only if security level < 3

2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
	nowhere)

2001/08/20  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: basic nfs handling in drakx
	fix bug 4257

	* detect_devices.pm (raidAutoStart): fix for when kmod is there

	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
	with devfs

	* diskdrake_interactive.pm, install_any.pm, install_steps.pm: try harder
	to umount /tmp/hdimage only when needed

	* Makefile.drakxtools, Makefile, tools/rpcinfo-flushed.c, network/nfs.pm,
	tools/.cvsignore, tools/Makefile, diskdrake.pm: basic nfs handling in
	drakx

2001/08/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers: Have NETWORKING_DNS in "Internet station" (was
	nowhere)

2001/08/20  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator_consts.pm: add weird options for NeoMagic NM2160 (request
	of Alex Hulse <axh0@aber.ac.uk> on cooker)

	* detect_devices.pm (raidAutoStart): fix for when kmod is there

	* diskdrake.pm: remove test code

	* fs.pm: fix bug 4257

	* fsedit.pm: try a stronger matching technique for parsing /proc/mdstat
	with devfs

	* install_steps.pm, diskdrake_interactive.pm, install_any.pm: try harder
	to umount /tmp/hdimage only when needed

	* interactive_gtk.pm (wait_message_nextW): fix previous text == new text
	causing no
	expose_event causing dead loop

2001/08/19  Pixel  <pixel@mandrakesoft.com>

	* diskdrake_interactive.pm: save fstab on exit

	* fsedit.pm: various typos fix

	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
	files are removed unless we're in ramdisk
	make the devfs= mount or nomount choice based on raid-based root work

	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
	files are removed unless we're in ramdisk
	fix diskdrake requiring gtk
	add some test code

	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
	removed unless we're in ramdisk
	various typos fix

	* install_steps_interactive.pm, common.pm, install2.pm, install_any.pm,
	lang.pm, pkgs.pm: rename isCdNotEjectable in usingRamdisk, ensure no
	files are removed unless we're in ramdisk

2001/08/19  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: major fs.pm rework + adaptation to it
	don't show nfs/smb/removable in install
	basic smb handling

	* network/smb.pm: basic smb handling

	* install_steps.pm: rename isCdNotEjectable in usingRamdisk, ensure no
	files are removed unless we're in ramdisk
	make the devfs= mount or nomount choice based on raid-based root work
	disable supermount for the moment
	major fs.pm rework + adaptation to it

	* install_steps_interactive.pm, lang.pm: rename isCdNotEjectable in
	usingRamdisk, ensure no files are removed unless we're in ramdisk
	simplify

	* standalone/diskdrake: rename isCdNotEjectable in usingRamdisk, ensure no
	files are removed unless we're in ramdisk
	fix diskdrake requiring gtk
	add some test code
	major fs.pm rework + adaptation to it

	* install_any.pm: rename isCdNotEjectable in usingRamdisk, ensure no files
	are removed unless we're in ramdisk
	major fs.pm rework + adaptation to it

	* partition_table.pm: remove JFS from @important_types (too broken for the
	moment)
	remove isSupermount (was unused)

	* common.pm, install2.pm, pkgs.pm: rename isCdNotEjectable in
	usingRamdisk, ensure no files are removed unless we're in ramdisk

	* interactive_gtk.pm (create_ctree): fix focusing (the assumption number
	of leaves = number of lines is dumb)

	* fsedit.pm: various typos fix
	major fs.pm rework + adaptation to it

	* bootlook.pm, standalone/drakboot: major fs.pm rework + adaptation to it

	* fs.pm: rename isCdNotEjectable in usingRamdisk, ensure no files are
	removed unless we're in ramdisk
	various typos fix
	major fs.pm rework + adaptation to it
	cleanup
	basic smb handling

	* diskdrake_interactive.pm: save fstab on exit
	major fs.pm rework + adaptation to it

2001/08/18  Pixel  <pixel@mandrakesoft.com>

	* fs.pm: basic nfs/smb handling in diskdrake
	fixes and function prototype removing

	* diskdrake.pm: basic nfs/smb handling in diskdrake
	nicer mount options code (for autofs and supermount)

	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount

	* interactive_gtk.pm: fix bug in box's height use

	* partition_table.pm, any.pm: fixes and function prototype removing

	* interactive.pm: readd the sorting based on size when no sorting is
	precised

	* my_gtk.pm (n_line_size): bigger spacing for 'various'

	* standalone/diskdrake, diskdrake_interactive.pm, fsedit.pm: basic nfs/smb
	handling in diskdrake

2001/08/18  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (n_line_size): bigger spacing for 'various'
	enhance look, fix ask_fileW

	* fs.pm: basic nfs/smb handling in diskdrake
	fixes and function prototype removing
	(write_fstab): add notail for reiserfs partitions in any case
	cleanup mounting options parsing

	* diskdrake.pm: basic nfs/smb handling in diskdrake
	nicer mount options code (for autofs and supermount)
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_
	cleanup mounting options parsing

	* raid.pm: update the raid size as it should be

	* diskdrake_interactive.pm: basic nfs/smb handling in diskdrake
	less verbose resize_reiserfs
	update the raid size as it should be
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_

	* fsedit.pm: basic nfs/smb handling in diskdrake
	update the raid size as it should be

	* network/tools.pm: fix typo
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_

	* partition_table.pm: fixes and function prototype removing

	* install_steps_interactive.pm, standalone/drakautoinst, proxy.pm,
	install_interactive.pm, network/ethernet.pm, interactive_http.pm,
	printerdrake.pm, Xconfigurator.pm, network/netconnect.pm,
	network/network.pm, interactive_newt.pm, network/modem.pm: big renaming
	of ask_from_entries_refH in ask_from and ask_from_entries_refH_powered
	in ask_from_

	* standalone/diskdrake: basic nfs/smb handling in diskdrake

	* any.pm: fixes and function prototype removing
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_

	* interactive_gtk.pm: fix bug in box's height use
	better radiobox keyboard handling
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_
	enhance look, fix ask_fileW

	* interactive.pm: readd the sorting based on size when no sorting is
	precised
	big renaming of ask_from_entries_refH in ask_from and
	ask_from_entries_refH_powered in ask_from_

	* install_steps.pm: oops, i inverted devfs=nomount and devfs=mount
	do not use devfs with root software raid

2001/08/18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: fix pass $all_hds->{hds} instead of
	$all_hds

2001/08/18  siegel

	* share/po/de.po: new german version

	* standalone/drakgw, bootlook.pm, network/ethernet.pm, install_any.pm,
	network/network.pm, raid.pm: fixed i18n

	* printerdrake.pm: i18n fixes

2001/08/17  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm: use diskdrake_interactive instead of diskdrake

	* standalone/interactive_http/interactive_http.cgi: fix typo
	restrict the progs callable to a few one.

	* standalone/interactive_http/index.html.pl,
	standalone/interactive_http/index.html: autogenerate index.html

	* fs.pm, diskdrake_interactive.pm, diskdrake.pm: add mount options choice
	(with IA-like stripping of unused options)

	* c/stuff.xs.pm: is_ext3 is needed in standalone
	Xtest not needed in standalone

	* c/Makefile.PL: is_ext3 is needed in standalone

	* standalone/interactive_http/miniserv.init,
	standalone/interactive_http/Makefile: restrict the progs callable to a
	few one.

	* Makefile.drakxtools: fix po not build, add interactive_http in DIRS

	* modules.pm: move back sunhme in sparc only

2001/08/17  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: no scrollbar if list <= 10 and the list is alone

	* interactive.pm, install2.pm: removed no_incon

	* standalone/net_monitor: added no internet connection configured label on
	button

	* network/netconnect.pm, network/ethernet.pm: corrected connection script
	creation

2001/08/17  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm: use diskdrake_interactive instead of diskdrake
	a hell lot of cleanup/rewrite:
	* diskdrake_interactive created, diskdrake is now interactive aware
	* added some documentation about the structure used for partitioning
	* all_hds now contain the various hds, lvm, raid
	* cleanup the isLVM, isRAID and alike functions
	* field {type} in detect_devices is now {media_type}
	* detect_devices::floppies is now floppies_dev
	* removed old function prototypes

	* fs.pm, diskdrake.pm: add mount options choice (with IA-like stripping of
	unused options)
	a hell lot of cleanup/rewrite:
	* diskdrake_interactive created, diskdrake is now interactive aware
	* added some documentation about the structure used for partitioning
	* all_hds now contain the various hds, lvm, raid
	* cleanup the isLVM, isRAID and alike functions
	* field {type} in detect_devices is now {media_type}
	* detect_devices::floppies is now floppies_dev
	* removed old function prototypes

	* install_steps_interactive.pm, install_steps_auto_install.pm,
	install2.pm, partition_table.pm, loopback.pm, raid.pm, bootlook.pm,
	standalone/diskdrake, install_any.pm, install_steps.pm, fsedit.pm,
	any.pm, detect_devices.pm, partition_table_raw.pm, bootloader.pm: a hell
	lot of cleanup/rewrite:
	* diskdrake_interactive created, diskdrake is now interactive aware
	* added some documentation about the structure used for partitioning
	* all_hds now contain the various hds, lvm, raid
	* cleanup the isLVM, isRAID and alike functions
	* field {type} in detect_devices is now {media_type}
	* detect_devices::floppies is now floppies_dev
	* removed old function prototypes

	* diskdrake_interactive.pm: add mount options choice (with IA-like
	stripping of unused options)
	(part_possible_actions): have possible actions sorted the way we want
	(Type): fix ext2->ext3 detection
	a hell lot of cleanup/rewrite:
	* diskdrake_interactive created, diskdrake is now interactive aware
	* added some documentation about the structure used for partitioning
	* all_hds now contain the various hds, lvm, raid
	* cleanup the isLVM, isRAID and alike functions
	* field {type} in detect_devices is now {media_type}
	* detect_devices::floppies is now floppies_dev
	* removed old function prototypes

	* modules.pm: move back sunhme in sparc only

2001/08/17  Till Kamppeter <till@mandrakesoft.com>

	* share/rpmsrate: Corrected listing of packages for printing in 'INSTALL'
	section.

2001/08/17  warly

	* share/rpmsrate: add package needed by the install in INSTALL
	remove shapecfg and gpa

2001/08/16  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed bug of CUPS not being installed during
	installation

2001/08/16  Pixel  <pixel@mandrakesoft.com>

	* install2.pm, install_any.pm: add remove_unused to have more place for mo
	files

2001/08/16  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed bug of CUPS not being installed during
	installation

2001/08/16  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: add remove_unused to have more place for mo files
	(getAndSaveAutoInstallFloppy): fix a missing del_loop which caused the
	unmounting at end of install to fail

	* install2.pm: add remove_unused to have more place for mo files

2001/08/16  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type

2001/08/16  warly

	* share/rpmsrate: add package needed by the install in INSTALL

2001/08/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po: updated French file

	* share/po/sk.po: updated Slovak file

	* lang.pm: Added explicit setting of XFree86 internal XIM for Thai

2001/08/16  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (getAndSaveAutoInstallFloppy): fix a missing del_loop
	which caused the
	unmounting at end of install to fail

2001/08/16  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Fixed setup dialog for the "postpipe" connection type

2001/08/16  warly

	* share/rpmsrate: add package needed by the install in INSTALL
	add kernel in INSTALL
	s/DrakConf/drakconf/

2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/it.po, share/po/id.po: updated Indonesian,
	Italian and Korean files

	* share/po/sr.po, share/po/sp.po, share/po/tr.po: updated Turkish and
	Serbian files

2001/08/15  Pixel  <pixel@mandrakesoft.com>

	* standalone/diskdrake: oops reverting modifs commited by error
	fix XkbOptions handling

	* standalone/keyboarddrake: fix XkbOptions handling

2001/08/15  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm, printerdrake.pm: Let the "Options" button only appear when
	the queue is Foomatic or with PPD (CUPS)

2001/08/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po, share/po/it.po: updated Indonesian, Italian and Korean
	files

	* share/po/es.po: updated spanish and Indonesian files

	* share/po/id.po: updated Indonesian, Italian and Korean files
	updated spanish and Indonesian files

2001/08/14  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: added options

2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: oops, fix type of installing X or not
	  - fix choice of packages when auto install

	* Makefile.config: add drakautoinst in drakxtools standalone binaries

	* install_steps_interactive.pm, install2.pm: 
	  - fix createBootdisk with auto
	  - fix setupBootloader with auto
	  - fix behaviour of draknet when auto-install
	  - remove auto flag when error-in-step

	* install_steps.pm, network/netconnect.pm: 
	  - fix behaviour of draknet when auto-install
	  - remove auto flag when error-in-step

	* Xconfigurator.pm: fix automatic configuration

2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po: updated Swedish file

2001/08/14  Pixel  <pixel@mandrakesoft.com>

	* devices.pm: add number-only device-name handling (eg: "801" is "sda1")

	* interactive_gtk.pm, interactive.pm: 
	  - small fixes (esp. gtk sensitive handling)
	  - add ask_file
	  - add "gtk" preference field

	* my_gtk.pm: remove ask_file (was unused)

	* http.pm: cleanup to please perl_checker

	* Makefile (TAGS): add MDK/Common files

	* services.pm: cleanup (it was working, but wasn't nice)

2001/08/14  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corrected activation button

2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: oops, fix type of installing X or not
	  - fix choice of packages when auto install

	* Makefile.config: add drakautoinst in drakxtools standalone binaries

	* install_steps_interactive.pm, install2.pm: 
	  - fix createBootdisk with auto
	  - fix setupBootloader with auto
	  - fix behaviour of draknet when auto-install
	  - remove auto flag when error-in-step

	* install_steps.pm, network/netconnect.pm: 
	  - fix behaviour of draknet when auto-install
	  - remove auto flag when error-in-step

	* Xconfigurator.pm: fix automatic configuration

2001/08/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po: updated Swedish file

2001/08/14  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: fix typo?

2001/08/14  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Transfer queues non-interactively when switching
	between LPD and LPRng.

2001/08/14  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corrected activation button

2001/08/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm, install2.pm,
	network/netconnect.pm: 
	  - fix behaviour of draknet when auto-install
	  - remove auto flag when error-in-step

	* Xconfigurator.pm: fix automatic configuration

	* install_any.pm: 
	  - fix choice of packages when auto install

2001/08/14  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: fix typo?

2001/08/14  Till Kamppeter <till@mandrakesoft.com>

	* printer.pm: Removed superfluous lines.

	* printerdrake.pm: Transfer queues non-interactively when switching
	between LPD and LPRng.
	Wait message for queue transfer, manufacturer name bugfix

2001/08/13  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* tools/i386/netboot/stage2.eepro100: Add eepro100 grub stage.
	Removing old version of eepro100 (no stage1).

	* tools/i386/netboot/stage1.eepro100: Add eepro100 grub stage.

2001/08/13  dam's  <damien@mandrakesoft.com>

	* interactive.pm: corrected 'no icon'

	* network/adsl.pm, network/netconnect.pm: adsl autodetection activated
	(planq the children)

2001/08/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakautoinst: ouch! use lib from /usr/lib/libDrakX, rather
	than from ..
	initial revision for drakautoinst
	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
	  - use additional fields {auto} and {noauto}, by step, to ease
	interactive auto install and oem stuff
	  - in install2.pm, perform each step either from the interactive class
	or from install_steps, according to the {auto} flag
	  - id, tell each step to not try to be automatic if {noauto}
	  - in the install, have auto install bootdisk created in install_any so
	we can always write a bootdisk (from install_steps) for further use from
	drakautoinst in standalone
	  - interactive version of install_steps_auto_install is now inheriting
	from the interactive class, so we can click on a previous automatic step
	and have it interactively during an interactive auto install

	* install_steps.pm, install_steps_interactive.pm,
	install_steps_auto_install.pm, install2.pm, steps.pm, install_any.pm:
	initial revision for drakautoinst
	  - put %installSteps in a separate package (steps.pm) (for drakxtools)
	  - use additional fields {auto} and {noauto}, by step, to ease
	interactive auto install and oem stuff
	  - in install2.pm, perform each step either from the interactive class
	or from install_steps, according to the {auto} flag
	  - id, tell each step to not try to be automatic if {noauto}
	  - in the install, have auto install bootdisk created in install_any so
	we can always write a bootdisk (from install_steps) for further use from
	drakautoinst in standalone
	  - interactive version of install_steps_auto_install is now inheriting
	from the interactive class, so we can click on a previous automatic step
	and have it interactively during an interactive auto install

2001/08/13  Pixel  <pixel@mandrakesoft.com>

	* install_steps_auto_install.pm, install2.pm, install_any.pm, steps.pm:
	auto_inst enhancements

	* install_steps_interactive.pm, standalone/XFdrake, install_steps.pm,
	Xconfigurator.pm: really use a class_discard for Xconfigurator::main

	* devices.pm: add /dev/hd[mt] handling

2001/08/13  siegel

	* share/po/de.po: new german version

2001/08/13  Till Kamppeter <till@mandrakesoft.com>

	* printerdrake.pm: Automatic transfer of queues when changing the spooler.
	Update printer queue list when exiting during install, so that the
	"Summary" entry is correct.
	When one sayd "No" on the test page, the modify dialog was not pointing
	to the current printer

	* printer.pm: Automatic transfer of queues when changing the spooler.
	The photo test page was not printed during installation.

	* interactive.pm: Tree lists are sorted again now.

2001/08/13  yduret

	* standalone/drakxconf: removed diskdrake from the choice

2001/08/12  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: longer timeout

2001/08/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fix ortograf typo

2001/08/12  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile: po->mo is no longer gonna be nasty with us

	* interactive_gtk.pm: clean the nice till fix

	* tools/cvslog2changelog.pl: add till

	* Makefile: ensure locales.tar.bz2 in perl-install/share is build
	po->mo is no longer gonna be nasty with us

2001/08/12  Till Kamppeter <till@mandrakesoft.com>

	* interactive.pm: Lists get only sorted when the "sort" option is given.

	* printer.pm, printerdrake.pm: Check files before checking RPM database =>
	Acceleration, waiting windows

2001/08/11  dam's  <damien@mandrakesoft.com>

	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
	share/themes/mdk-bg.png: new theme for beta

	* share/theme-editor.pl: updated
	now works.

2001/08/11  tkamppeter

	* printer.pm, printerdrake.pm: Restructuring continued and debugged

2001/08/10  dam's  <damien@mandrakesoft.com>

	* share/theme-editor.pl: added theme editor

	* network/tools.pm: corrected password file substitution

	* network/ethernet.pm: remove Data::Dumper

	* network/netconnect.pm: added spped and timeout handling for isdn

	* any.pm: corrected autologin question

	* network/isdn.pm: tomeout option deactivated.

	* standalone/draknet: corrected internet cnfiguration pop up, and some
	other studds
	ifup/down ethx, anew pixmap for list

	* my_gtk.pm: removed Datta::Dump use

	* pixmaps/eth_card_mini2.png: added

2001/08/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: small font fix

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/ar.po, share/po/sl.po, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* share/po/bg.po: updated Bulgarian file
	updated pot file

2001/08/10  yduret

	* bootlook.pm: corrected vnew usage (thx gc)

2001/08/09  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: added missing use
	added pixmap for eth. Some factorisation

	* network/tools.pm: added useless function type2interface for future use

	* my_gtk.pm: added gtkbuttonset, and corrected scrollbar height for
	standalone mode.

	* network/isdn.pm: labels corrections

2001/08/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/tinyfirewall, standalone/printerdrake, standalone/mousedrake,
	standalone/drakxservices, standalone/net_monitor, standalone/draknet,
	standalone/drakproxy, standalone/XFdrake, standalone/keyboarddrake,
	standalone/drakxconf, standalone/adduserdrake, standalone/livedrake,
	standalone/drakboot, standalone/draksec: use vnew the right way
	everywhere

	* standalone/drakgw: use vnew the right way everywhere
	  - if package installs fail, redo one by one to know which one failed
	  - try to not end up with a failing configuration file, if program is
	brutally stopped
	  - if unrecognized config file, don't fail, rather ignore it and
	proceed
	  - run dhcpd_update feature (if present) after setup of dhcp server

	* share/rpmsrate: put traceroute in network client also, for claudio

2001/08/09  Pixel  <pixel@mandrakesoft.com>

	* standalone.pm, install_any.pm: rename interactive_pkgs in
	pkgs_interactive

2001/08/09  siegel

	* standalone/interactive_http/miniserv.logrotate,
	standalone/interactive_http/Makefile: Added logrotate for
	"/var/log/drakxtools_http.log"

2001/08/09  tkamppeter

	* printer.pm, printerdrake.pm: New structure for queue modification,
	general structure clean-up

2001/08/09  yduret

	* bootlook.pm: readded in->do_pkg->install (i sux)
	rewrite in a more drakx fashion

	* my_gtk.pm: added gtkset_sensitive in wrapper..

2001/08/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

2001/08/08  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: typo
	makes interactive_pkgs stuff work
	add interactive_pkgs stuff

	* Makefile: skip module CGI in test_pms (perl_checker)

	* fsedit.pm (check_mntpoint): remove /root from directories that "should
	remain within the root filesystem"

	* proxy.pm, network/ethernet.pm, network/isdn.pm, tinyfirewall.pm,
	printerdrake.pm, standalone/drakgw, standalone/draknet,
	network/tools.pm, bootlook.pm, standalone.pm, standalone/drakproxy,
	standalone/XFdrake, network/netconnect.pm, standalone/adduserdrake,
	network/adsl.pm, network/network.pm, printer.pm, network/modem.pm: add
	interactive_pkgs stuff

	* install_steps_interactive.pm: installing foomatic before doing anything
	about printer
	add interactive_pkgs stuff

	* Xconfigurator.pm, any.pm: makes interactive_pkgs stuff work
	add interactive_pkgs stuff

	* install_any.pm (remove, remove_nodeps): fix typo
	makes interactive_pkgs stuff work
	add interactive_pkgs stuff

2001/08/08  tkamppeter

	* install_steps_interactive.pm: Installation fitted to new printerdrake

	* printer.pm: Different choosable test pages available now
	Corrected init script calls in the (start|stop|restart)_service
	functions

	* printerdrake.pm: Different choosable test pages available now
	Removed superfluous line in install_spooler function

2001/08/08  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (naughtyServers): add drakxtools-http

2001/08/07  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: nex features

	* network/netconnect.pm: removed debugging message

	* network/isdn.pm: corrected pkgs use -> require

	* my_gtk.pm: added gtkset_relief

	* pixmaps/network.png, pixmaps/draknet_step.png: added

2001/08/07  Pixel  <pixel@mandrakesoft.com>

	* pixmaps/network.png, pixmaps/draknet_step.png: re-adding with -kb
	removing for re-adding with -kb

2001/08/07  tkamppeter

	* printer.pm, printerdrake.pm: Automatic installation of all needed
	packages

2001/08/07  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corrected label

	* network/netconnect.pm: removed debugging message

	* standalone/net_monitor: nex features
	added color choice
	lot of improvments

	* network/isdn.pm: corrected pkgs use -> require

	* my_gtk.pm: added gtkset_relief

	* pixmaps/network.png, pixmaps/draknet_step.png: added

2001/08/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/tools.c: say that it's a data read error, when we can't load
	the ramdisk

	* mdk-stage1/Makefile.common, mdk-stage1/bzlib/bzlib.h: don't use system
	wide bzlib.h but our own provided one

2001/08/07  Pixel  <pixel@mandrakesoft.com>

	* rescue/tree/etc/issue: fix distrib number

	* interactive.pm: adding http feature, mainly for standalone tools

	* standalone/miniserv.pem, standalone/miniserv.pl: Initial revision
	import

	* standalone/interactive_http/miniserv.pl: add interactive_http
	Initial revision

	* resize_fat/main.pm: fix

	* partition_table.pm: nicer names for journalised fs

	* Makefile.drakxtools, standalone/interactive_http/miniserv.init,
	standalone/interactive_http/index.html,
	standalone/interactive_http/interactive_http.cgi,
	standalone/interactive_http/miniserv.conf,
	standalone/interactive_http/miniserv.pam,
	standalone/interactive_http/miniserv.users, Makefile,
	standalone/interactive_http/Makefile: add interactive_http

	* interactive_http.pm, standalone/interactive_http.cgi: add
	interactive_http
	adding http feature, mainly for standalone tools

	* share/diskdrake.rc: have every journalised in darkred

	* c/stuff.xs.pm: add S_IFIFO

	* standalone/interactive_http/miniserv.pem: Initial revision

2001/08/06  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: debugging, profile coding, isdn 128 debugging
	corrected gtkradio : shift instead of pop

	* interactive_gtk.pm, install_steps_gtk.pm: corrected gtkradio : shift
	instead of pop

	* network/netconnect.pm, network/ethernet.pm, network/isdn.pm: debugging,
	profile coding, isdn 128 debugging

2001/08/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/i386/busybox: try a busybox with better globbing under the SHELL

2001/08/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/de.po: Updates to German file by Peer Dunker <peer46@gmx.net>

	* share/po/vi.po: updated Vietnamese file

2001/08/06  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm: kernel_arch removed

	* fsedit.pm (@suggestions_mntpoints): remove /root (tx2gc)

	* interactive_gtk.pm, interactive_newt.pm: cleanup, functions already
	defined in interactive

2001/08/06  yduret

	* tinyfirewall.pm: use MDK::Common;
	use network::netconnect;

	* standalone/drakgw: use MDK::Common;
	use network::netconnect; and update functions call from netconnect

2001/08/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eo.po: updated Esperanto file

2001/08/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps_auto_install.pm: switch to gtk install when
	interactiveSteps is defined

2001/08/05  tkamppeter

	* printer.pm, printerdrake.pm: Automatic installation and start of the
	desired printer spooler

2001/08/04  Pixel  <pixel@mandrakesoft.com>

	* share/list: add tune2fs enabling switching from ext2 to ext3

	* fs.pm, fsedit.pm, partition_table.pm: add ext3 support

	* diskdrake.pm: add ext3 support
	(Type): handle lossless switch from ext2 to ext3

	* pkgs.pm: make perl_checker happy

	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3

	* common.pm: moved arch() and alike to MDK::Common::System

2001/08/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): simplify, fix
	setSelectedFromCompssList not called in
	expert even the first_time (especially nasty for auto_installs)

	* fs.pm, partition_table.pm, fsedit.pm: add ext3 support

	* diskdrake.pm: add ext3 support
	(Type): handle lossless switch from ext2 to ext3

	* install_steps_gtk.pm: add the feather feature, but do not enable it

	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
	(wait_msg doesn't
	exist anywhere, it must be a fpons typo)

	* pkgs.pm: make perl_checker happy

	* c/stuff.xs.pm, c/Makefile.PL: add is_ext3

	* bootloader.pm: as when lilo is selected, we don't try to install grub,
	just create the
	config file in case it may be useful

	* common.pm: moved arch() and alike to MDK::Common::System

	* partition_table_raw.pm: add yaboot detection

	* install_any.pm, share/rpmsrate: create a new flags "X" selected by
	default, contain what X related packages
	which were in "SYSTEM"

2001/08/04  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): simplify, fix
	setSelectedFromCompssList not called in
	expert even the first_time (especially nasty for auto_installs)

	* install_steps_gtk.pm: add the feather feature, but do not enable it

	* bootloader.pm: as when lilo is selected, we don't try to install grub,
	just create the
	config file in case it may be useful

	* interactive_gtk.pm (ask_browse_tree_info_refW): s/wait_msg/wait_message/
	(wait_msg doesn't
	exist anywhere, it must be a fpons typo)

	* share/rpmsrate, install_any.pm: create a new flags "X" selected by
	default, contain what X related packages
	which were in "SYSTEM"

2001/08/03  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor, network/tools.pm, network/netconnect.pm,
	network/isdn.pm: debugging, 128Kb/s ISDN

	* Makefile.drakxtools, Makefile: added network pms

2001/08/03  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: typo fix
	replace isJfs/isXfs/... with isThisFs("jfs"

	* install_any.pm: replace isJfs/isXfs/... with isThisFs("jfs"
	update_userkderc is now called update_gnomekderc

	* Makefile: better po skipping

	* commands.pm (sync): (re-?)add

	* fs.pm, install_steps_interactive.pm, diskdrake.pm, bootloader.pm:
	replace isJfs/isXfs/... with isThisFs("jfs"

	* fsedit.pm (check_mntpoint): /root should remain within the root
	filesystem

	* install_steps.pm (choosePartitionsToFormat): toFormatUnsure=1 for /usr
	update_userkderc is now called update_gnomekderc

2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/adsl.c: 
	  - fix problem of clashing user/pass between adsl and ftp/http in case
	of automatic installs
	  - update doc on automatic install parameters (doc/TECH-INFOS)

	* mdk-stage1/doc/TECH-INFOS: 
	  - small update
	  - fix problem of clashing user/pass between adsl and ftp/http in case
	of automatic installs
	  - update doc on automatic install parameters (doc/TECH-INFOS)

2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

2001/08/02  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm, services.pm, install_interactive.pm,
	network/netconnect.pm, install_any.pm, Xconfigurator.pm: instead of
	testing if ref($in) or ref($o) contains /gtk/, test if interactive_gtk
	is in ISA of the object

	* partition_table.pm, fsedit.pm, diskdrake.pm: JFS support

2001/08/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/adsl.c: 
	  - fix problem of clashing user/pass between adsl and ftp/http in case
	of automatic installs
	  - update doc on automatic install parameters (doc/TECH-INFOS)

	* mdk-stage1/doc/TECH-INFOS: 
	  - small update
	  - fix problem of clashing user/pass between adsl and ftp/http in case
	of automatic installs
	  - update doc on automatic install parameters (doc/TECH-INFOS)

2001/08/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

2001/08/02  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: instead of testing if ref($in) or ref($o) contains
	/gtk/, test if interactive_gtk is in ISA of the object
	add jfs support

	* install_steps_interactive.pm, services.pm, install_interactive.pm,
	network/netconnect.pm, Xconfigurator.pm: instead of testing if ref($in)
	or ref($o) contains /gtk/, test if interactive_gtk is in ISA of the
	object

	* partition_table.pm: JFS support
	add jfs support

	* fsedit.pm, diskdrake.pm: JFS support

	* tools/ntp_servers.pl, timezone.pm: update ntp servers list

	* fs.pm, share/list: add jfs support

2001/08/02  Pixel  <pixel@mandrakesoft.com>

	* tools/ntp_servers.pl, timezone.pm: update ntp servers list

	* fs.pm, share/list, partition_table.pm, install_any.pm: add jfs support

2001/08/01  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: write_on_text writes in blue instead of black

	* network/isdn.pm: typo
	added de-installation before installateion

	* network/netconnect.pm: translation correction

2001/08/01  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
	auto_installs

	* raid.pm (new): now works with a list of partitions

2001/08/01  tkamppeter

	* printer.pm: Fixed bug in recognizing the printer ID in the Foomatic
	overview.

2001/08/01  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: write_on_text writes in blue instead of black

	* network/isdn.pm: typo
	added de-installation before installateion

	* network/netconnect.pm: translation correction

2001/08/01  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, fsedit.pm: handle auto_allocate_raids for
	auto_installs

	* raid.pm (new): now works with a list of partitions

2001/07/31  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: added splash screen between different
	configurations. Added splash wizard mode
	added intro step for each configuration type.

	* network/tools.pm: corrected ask_connect_now

	* my_gtk.pm: added write_on pixmap : a function to write text on pixma,
	using fonts.

	* network/ethernet.pm: added intro step for each configuration type.

2001/07/31  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_steps_interactive.pm: after copying the auto install floppy,
	sync in case you shall remove the
	floppy right after the LED switches off yet the kernel decides to not
	flush
	everything

	* modules.pm, mdk-stage1/modules_descr.h: have "catc" driver for usbnet
	installs

	* bootloader.pm: load msdos and vfat before mkbootdisk (now using syslinux
	so..)

2001/07/31  Pixel  <pixel@mandrakesoft.com>

	* common.pm (translate): empty string translation is an empty string

	* install_gtk.pm (test_mouse): s/my (.*) = 0 if 0/my $1 if 0/

	* share/rpmsrate: add cpio
	lower gurpmi (5->4)

	* share/gen_locales.sh, share/locales-skeleton.tar.bz2: chineese locale
	support
	better handling of locales

	* Makefile.drakxtools (install): s/cp -rf/cp -rfL/   (-L = --dereference,
	aka always follow symbolic links)

	* install_steps_gtk.pm (installPackages): make $show_advertising a global
	state (for Vincent Meyer)

	* share/Makefile, Makefile: better handling of locales

	* install_steps_auto_install.pm: remove bad prototype

2001/07/30  dam's  <damien@mandrakesoft.com>

	* network/ethernet.pm: added cable internet connection selection
	added internet connection selection in case of multiple configurations

	* network/netconnect.pm: corrected ask_connect_now behaviour
	corrected ask_connect_now
	debug
	added internet connection selection in case of multiple configurations

	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
	corrected ask_connect_now
	added internet connection selection in case of multiple configurations

2001/07/30  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
	hdlist files"
	occurs when the hdlists are in fact not available

	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
	based on installed glibc

	* printer.pm, printerdrake.pm: use MDK::Common
	i wonder why it was included and Till used an older version without
	merging?

	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
	yet)

	* share/rpmsrate: raise rxvt (4->5)
	lower rpmdrake & harddrake (5->4)
	remove rootfiles (unneeded)

	* Makefile: use -excludeMDK::Common::Globals for perl_checker
	automatic handling of locales.tar.bz2 based on installed glibc

2001/07/30  tkamppeter

	* printer.pm, printerdrake.pm: In beginners mode one chooses only the
	printer, not the driver (default driver)

2001/07/30  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm: debug
	added internet connection selection in case of multiple configurations

	* network/adsl.pm, network/tools.pm, network/modem.pm, network/isdn.pm:
	added internet connection selection in case of multiple configurations

	* network/ethernet.pm: added cable internet connection selection
	added internet connection selection in case of multiple configurations

2001/07/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/tools.c, mdk-stage1/stage1.c, mdk-stage1/config-stage1.h:
	have a memory limit also for Rescue (different one)

2001/07/30  Pixel  <pixel@mandrakesoft.com>

	* printer.pm, printerdrake.pm: use MDK::Common
	i wonder why it was included and Till used an older version without
	merging?

	* resize_fat/main.pm: switch to MDK::Common (i wonder why it was not done
	yet)

	* share/rpmsrate: raise rxvt (4->5)
	lower rpmdrake & harddrake (5->4)
	remove rootfiles (unneeded)

	* pkgs.pm (getDeps): ensure "depslist.ordered has not same package as
	hdlist files"
	occurs when the hdlists are in fact not available

	* Makefile: use -excludeMDK::Common::Globals for perl_checker
	automatic handling of locales.tar.bz2 based on installed glibc

	* share/locales.tar.bz2.ppc, share/locales.tar.bz2,
	share/locales.tar.bz2.sparc, share/.cvsignore, share/gen_locales.sh,
	share/locales-skeleton.tar.bz2: automatic handling of locales.tar.bz2
	based on installed glibc

2001/07/28  tkamppeter

	* printer.pm, printerdrake.pm: Support for PPD files of PostScript
	printers (when CUPS is used)

2001/07/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: fixed undeselectable group when 'Other' sub-tree
	is seen as a package.

	* interactive_gtk.pm: allow ask_browse_tree_info_refW to return 0 on
	cancel (previously always 1).
	added a before leaving code to clean added reference (else it seems to
	bahave
	strangely on changing steps).
	fixed wrong reference to added icons to ask_browse_tree_info_refW.

	* services.pm: allow cancel on services which do not change anything.

	* install_steps_interactive.pm: changed warn dialog to okcancel dialog
	when asking user to insert Boot floppy
	used or Update Modules floppy (die may cause to rerun install else).

2001/07/27  gbeauchesne

	* install_steps_gtk.pm: 
	  - install_steps_gtk.pm (launchX) : create /var/log, if not existent,
	for
	XFree86.log

2001/07/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules.c: allow to escape from Update Modules if you don't
	want to insert an ext2 floppy
	Disk -> Floppy for Update Modules disk

2001/07/27  Stew Benedict  <sbenedict@mandrakesoft.com>

	* share/locales.tar.bz2.ppc, keyboard.pm, help.pm, partition_table.pm,
	Xconfigurator.pm: last of sync with PPC beta mods

2001/07/27  tkamppeter

	* standalone/printerdrake, printer.pm, printerdrake.pm: Printerdrake
	changed to use Foomatic, driver options, spooler change

2001/07/26  dam's  <damien@mandrakesoft.com>

	* network/isdn.pm: added firmware loading/configuration
	not loading the module at detection.

	* standalone/draknet: MDK::common correction

	* modules.pm: added default option id="HiSax" to isdn module

2001/07/26  fcrozat

	* share/po/fr.po: Fix spelling of 'molette'

2001/07/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: added blank and updatemodules options to DrakX.

	* bootloader.pm: added prioritary kernel entry 'default' as the kernel
	typically copied from a
	modified blank.img file with a kernel (no initrd.img necessary to
	build).
	This kernel takes precedance over any other kernel.

	* install_steps_interactive.pm: really fixes Diskette with Floppy.
	fix typo as Diskette to Floppy.
	add support for new modules load as described by GG.

	* install_steps.pm: fixed some silly typo and tiny bugs.
	fixed typo as Diskette to Floppy.
	add support for modified blank.img floppy and Update Modules floppy.
	In first case copy kernel to /boot/vmlinuz-default to be taken into
	account by
	bootloader suggestion method.
	In second case, check installed kernel and update any modules listed in
	the
	Update Modules floppy.

2001/07/26  gbeauchesne

	* bootloader.pm: 
	  - Don't set "lba32" on ia64

2001/07/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/modules.c: pass
	"--blank" to DrakX when module loading is disabled
	  - add "changedisk" feature
	  - add "updatemodules" feature

	* mdk-stage1/tools.c, mdk-stage1/doc/UPDATEMODULES, mdk-stage1/stage1.h: 
	  - add "changedisk" feature
	  - add "updatemodules" feature

	* mdk-stage1/probing.c: silently load usb controllers

2001/07/25  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: fixed new network organization

	* standalone/net_monitor: updated. Profile handling.

	* network/isdn_consts.pm: updated ISDN detection. Added firmware handling
	and drivers other than hisax

2001/07/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed no test (or die test) to void package read on depslist
	(allowed to keep
	package indexing good on multi-arch).
	cleaned code to examine depslist.ordered and packages list.

	* rescue/make_rescue_img: fixed to use perl-MDK-Common.

	* tools/syncrpms: fixed still missing rpmtools:: before a version_compare
	...

2001/07/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules_descr.h: small typo

	* mdk-stage1/init.c, mdk-stage1/newt-frontend.c: Use Yahve quoting

2001/07/25  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile (install): build mo's

	* commands: move to MDK::Common, bool->to_bool

	* common.pm: do not export sync, keep it in common (esp. so that it
	doesn't conflict with my_gtk::sync
	(removeXiBSuffix): add TB (tera)

	* share/po/i18n_compssUsers, rescue/make_rescue_img: use MDK::Common

	* share/verify_modules.pl: new common syntax

	* Makefile: 
	  - temporary hack to have at least good UTF-8 based locales (otherwise
	rpmlib segfaults)
	  - touch share/po/*.po, so that they are not rebuilded (pablo takes
	care of them)

	* share/list: add MDK::Common::Globals

	* partition_table_sun.pm, install2.pm, partition_table.pm, commands.pm,
	install_steps.pm, partition_table_raw.pm, partition_table_mac.pm: do not
	export sync, keep it in common (esp. so that it doesn't conflict with
	my_gtk::sync

2001/07/25  Stew Benedict  <sbenedict@mandrakesoft.com>

	* mdk-stage1/modules_descr.h: add decriptions for integrated Apple
	Network/SCSI hardware

2001/07/24  dam's  <damien@mandrakesoft.com>

	* network/isdn_consts.pm, network/netconnect.pm, network/ethernet.pm:
	corrected speed fax + PCI, updated configuration

2001/07/24  daouda

	* bootlook.pm: better runlevel handling -> persistent level choice

2001/07/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

2001/07/24  Pixel  <pixel@mandrakesoft.com>

	* commands.pm: move to MDK::Common, bool->to_bool
	fix syntax
	removed/renamed unused/seldom-used functions
	generalize the use of chomp_ as the functional alternative to chomp (and
	works on lists)

	* swap.pm: temporary hack to have at least good UTF-8 based locales
	(otherwise rpmlib segfaults)
	move to MDK::Common, bool->to_bool

	* unused/scsi.pm, standalone/draknet: generalize the use of chomp_ as the
	functional alternative to chomp (and works on lists)

	* globals.pm, perl2fcalls: 
	  - globals is now MDK::Common::Globals
	  - perl2fcalls is now /usr/bin/perl_checker

	* install_steps_gtk.pm: move to MDK::Common, bool->to_bool
	move to MDK::Common, bool->to_bool
	removed/renamed unused/seldom-used functions

	* common.pm: move to MDK::Common, bool->to_bool
	cleanup (remove unused stuff and dangerous prototypes)
	removed/renamed unused/seldom-used functions
	generalize the use of chomp_ as the functional alternative to chomp (and
	works on lists)

	* network/tools.pm, network/adsl.pm, network/netconnect.pm,
	network/ethernet.pm, network/isdn.pm, network/modem.pm: 
	  - globals is now MDK::Common::Globals
	  - perl2fcalls is now /usr/bin/perl_checker
	move to MDK::Common, bool->to_bool

	* partition_table_dos.pm, partition_table_empty.pm, my_gtk.pm, modparm.pm,
	standalone/keyboarddrake, install2.pm, raid.pm, crypto.pm,
	partition_table_mac.pm, standalone/mousedrake, devices.pm,
	install_steps.pm, resize_fat/main.pm, help.pm, install_interactive.pm,
	install_steps_stdio.pm, loopback.pm, resize_fat/any.pm,
	standalone/drakboot, pkgs.pm, keyboard.pm, Xconfigurator.pm, fs.pm,
	interactive_gtk.pm, standalone/drakxservices, fsedit.pm,
	network/network.pm, interactive_stdio.pm, diskdrake.pm, modules.pm,
	resize_fat/directory.pm, standalone/net_monitor,
	install_steps_auto_install.pm, partition_table_sun.pm, proxy.pm,
	lang.pm, partition_table_bsd.pm, tinyfirewall.pm, standalone/draksec,
	standalone/drakxconf, resize_fat/info_sector.pm,
	standalone/adduserdrake, sbus_probing/main.pm, printer.pm,
	partition_table_raw.pm, install_steps_interactive.pm, install_gtk.pm,
	Xconfigurator_consts.pm, resize_fat/boot_sector.pm, partition_table.pm,
	standalone/livedrake, standalone/drakgw, mouse.pm, lvm.pm,
	interactive.pm, share/list, interactive_newt.pm, install_steps_newt.pm,
	bootloader.pm: move to MDK::Common, bool->to_bool

	* services.pm, printerdrake.pm: move to MDK::Common, bool->to_bool
	removed/renamed unused/seldom-used functions

	* standalone/diskdrake, install_any.pm, any.pm, Xconfig.pm, timezone.pm,
	detect_devices.pm, bootlook.pm: move to MDK::Common, bool->to_bool
	generalize the use of chomp_ as the functional alternative to chomp (and
	works on lists)

	* Makefile: temporary hack to have at least good UTF-8 based locales
	(otherwise rpmlib segfaults)
	move to MDK::Common, bool->to_bool
	move to MDK::Common, bool->to_bool

2001/07/23  dam's  <damien@mandrakesoft.com>

	* modules.pm, network/tools.pm, network/isdn_consts.pm,
	network/netconnect.pm, network/isdn.pm: isdn now works with isdn-light.
	Only 64kb/s and still some debuf stuff to be fixed.

2001/07/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/sk.po: updated Slovak and Croatian files

2001/07/23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: cleanup

	* c/stuff.xs.pm, Makefile.drakxtools, standalone.pm, common.pm, Makefile,
	tools/make_mdkinst_stage2, lang.pm, share/po/Makefile,
	share/po/.cvsignore: do not use the po's directly. Use mo's through
	gettext

2001/07/22  dam's  <damien@mandrakesoft.com>

	* network/netconnect.pm, network/isdn.pm: updated isdn config, moved
	isdn_data from netconnect_const to isdn_const
	big work on isdn. Not finished

	* modules.pm, standalone/net_monitor, network/tools.pm, detect_devices.pm:
	big work on isdn. Not finished

	* network/netconnect_consts.pm, network/isdn_consts.pm: updated isdn
	config, moved isdn_data from netconnect_const to isdn_const

2001/07/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* docs/README.pxe: initial release, dhcpd and tftpd only.

2001/07/20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/el.po: updated Greek file

2001/07/20  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile: externalize the pm 2 pm_.c in fake_c.pl

	* lang.pm: fix
	(load_po): enhance readability

	* share/po/fake_c.pl: cleanup
	externalize the pm 2 pm_.c in fake_c.pl

	* common.pm (translate): basic plural forms handling (not finished)

	* help.pm: fix missing ``"''

	* bootloader.pm: fix
	(install_lilo): order fat partitions first

2001/07/19  dam's  <damien@mandrakesoft.com>

	* share/themes.rc, share/logo-mandrake.png, share/themes-mdk.rc,
	share/help.png: new color

	* network/netconnect.pm: correct bug. thanx to the little stagiaire.

2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
	graphic logo for 8.1

2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
	share/po/eu.po: updated Croatian file

2001/07/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: updated with new
	graphic logo for 8.1

	* Xconfigurator.pm: fixed problable freeze on pci probe.

2001/07/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/fi.po, share/po/DrakX.pot, share/po/es.po,
	share/po/eo.po, share/po/fr.po, share/po/wa.po, share/po/da.po,
	share/po/de.po, share/po/el.po, share/po/et.po, share/po/hu.po,
	share/po/eu.po: updated Croatian file

2001/07/19  Pixel  <pixel@mandrakesoft.com>

	* globals.pm: no strict 'refs' instead of 'vars'

	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
	ask_install_simple (obsolete)

	* install_steps_auto_install.pm: fix exit install in graphical
	auto_install's

2001/07/19  Pixel  <pixel@mandrakesoft.com>

	* install_steps_auto_install.pm, install_steps_newt.pm, install2.pm: based
	on Michael Brown <mbrown@fensystems.co.uk> patch:
	  - enables graphical steps in auto_installs for more than gtk
	  - various cleanup

	* globals.pm: no strict 'refs' instead of 'vars'

	* services.pm: rename ask_install_gtk in ask_install, ask_install is now
	ask_install_simple (obsolete)

2001/07/18  mbadaire

	* modules.pm, install_any.pm, bootloader.pm: IA64 adaptation

2001/07/18  Stew Benedict  <sbenedict@mandrakesoft.com>

	* modules.pm, install_steps.pm, install_steps_interactive.pm,
	tools/serial_probe/serial.c, detect_devices.pm, partition_table_mac.pm,
	diskdrake.pm: roll back some changes from PPC beta - OldWorld vs
	NewWorld bootloader
	modem detection on ttyS0, new sound module in 2.4.4

2001/07/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: disabled Frame buffer for all S3 cards (hangs with XF4
	and S3 ViRGE on reboot
	with Aurora).

	* Xconfigurator.pm: cleaned and added S3 Inc in the list to disable test
	for these card.

2001/07/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: removed references to XFree86-ISO8859-{2,9} packages (no
	more used)

	* keyboard.pm: small keyboard changes

2001/07/13  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/po/fr.po: update

2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
	fsck succeeded in
	fixing partition and now is ok).

	* run_program.pm: changed exit code of failed exec in rooted to 128
	instead of 1 (may clash with
	exit code of fsck else).

	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.

2001/07/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* interactive.pm: added ask_browse_tree_info and ask_browse_tree_info_refW
	(default).

	* services.pm: reworked to use new service layout for install.

	* install_steps_gtk.pm: use common code for tree with info dialog
	(individual package selection).

	* fs.pm: fixed wrong examination of fsck return code (exit code 1 says
	fsck succeeded in
	fixing partition and now is ok).

	* interactive_gtk.pm: merging common code for individual package selection
	and service to create
	ask_browse_tree_info_refW, added featrures for group icon always
	up-to-date
	(take some memory but not too much, not used if flat model).

	* run_program.pm: changed exit code of failed exec in rooted to 128
	instead of 1 (may clash with
	exit code of fsck else).

	* any.pm: fixed bug for writing in /etc/sysconfig/desktop file.

2001/07/10  Stew Benedict  <sbenedict@mandrakesoft.com>

	* mdk-stage1/init.c, mdk-stage1/Makefile.common: minor mods for PPC build,
	define TIOCSCTTY, Makefile mods

2001/07/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added multiple tries if a transaction of only one package
	fails.

	* install_any.pm: added LDAP support for authentication.

	* install_steps_interactive.pm: added LDAP support for password
	authentication, updated root password window look.

	* bootloader.pm: fixed compilation error.
	removed compilation error, the resolution is not quite good and may be
	reworked :-)

	* help.pm: updated root password help.

2001/07/09  mbadaire

	* bootloader.pm: modify lilo.conf to elilo.conf if arch ia64

	* common.pm: Add IA64 support

2001/07/08  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
	boot partition is
	set correctly again

2001/07/08  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (suggest): replace "is ia64" with "is not ia64" so that
	boot partition is
	set correctly again

2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
	still causes dead
	lock and may not reproduce correct list. take care of choice that need
	to be
	examined before else another package may be chosen if choice is not
	satisfied
	when selecting packages.

	* install_any.pm: change all 8 space into a tabulation, this is simple and
	may change visual
	aspect but it gives correct output and filesize by 40%.

2001/07/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed selected_leaves. change algorithm as previous one can
	still causes dead
	lock and may not reproduce correct list. take care of choice that need
	to be
	examined before else another package may be chosen if choice is not
	satisfied
	when selecting packages.

	* install_any.pm: change all 8 space into a tabulation, this is simple and
	may change visual
	aspect but it gives correct output and filesize by 40%.

2001/07/06  Pixel  <pixel@mandrakesoft.com>

	* tools/ntp_servers.pl: some workarounds

2001/07/06  Pixel  <pixel@mandrakesoft.com>

	* tools/ntp_servers.pl: some workarounds

2001/07/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* keyboard.pm: added DISABLE_WINDOWS_KEY in /etc/sysconfig/keyboard if a
	laptop is detected.

2001/07/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules_descr.h: add usb net descriptions

2001/07/05  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (file2part): created

	* any.pm: ia64 bootloader configuration adaptations

	* bootloader.pm: typo fix
	ia64 bootloader configuration adaptations

2001/07/04  dam's  <damien@mandrakesoft.com>

	* globals.pm: added error handling

	* network/netconnect.pm, network/ethernet.pm: modularized. It compiles,
	runs, and works for some stuff.
	modularization continuated
	updated CVS:
	----------------------------------------------------------------------
	uses the fantastic global module.
	corrected

	* standalone/draknet: corrected

	* network/tools.pm, network/adsl.pm: modularized. It compiles, runs, and
	works for some stuff.
	updated CVS:
	----------------------------------------------------------------------
	uses the fantastic global module.
	corrected

	* network/network.pm: modularized. It compiles, runs, and works for some
	stuff.
	modularization continuated

	* network/isdn.pm, network/modem.pm: modularized. It compiles, runs, and
	works for some stuff.
	updated CVS:
	----------------------------------------------------------------------
	uses the fantastic global module.

	* docs/net_object_class.fig: updated doc

2001/07/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added missing last Card read from Cards+ file.
	allow S3 card to have VideoRam uncommented, fix 86c368 video driver that
	seems
	needing VideoRam too.
	fixed need of video ram if 86c368 and S3 ViRGE.

	* install_any.pm: another too wide string truncated to 80 chars.
	make auto_inst.cfg file no longer than 80 chars wide.

	* install_steps_interactive.pm: added back timezone settings (thanks
	FredC).

2001/07/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/adsl.c: nonsense to exit if interface is not "eth.*"

	* mdk-stage1/newt-frontend.c: very nice things happen when you hardcode
	arrays to a too small value

	* docs/HACKING: update -d in order to get all the directories...

2001/07/04  mbadaire

	* tools/ia64/elilo.efi, tools/specific_arch, share/list.ia64,
	tools/ia64/e2fsck.shared: Ia64 Adaptation

	* install_gtk.pm, share/list.i386, common.pm, share/list.ppc, share/list,
	share/list.alpha, install_steps_gtk.pm, share/list.sparc: Ia64
	adaptation

2001/07/04  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (selected_leaves): fix dead-loop
	(selected_leaves): make it work with loops (eg: mandrake_desk loops with
	control-center resulting on none of them being a leaf)

	* perl2fcalls: check exclude_uses before reporting bad use of "use"
	exclude module globals from use's to look at

	* globals.pm (import): yet another fix
	fix a pb when init is called before another import
	typo correction
	enhanced: shared values are grouped together based on a name
	module to share constant values between modules

	* fsedit.pm: add /boot/efi in suggestions for ia64

	* install_interactive.pm, install_steps.pm: fix typo
	verify a /boot/efi partition exists

	* Makefile, install_any.pm, share/list.ppc, share/list.alpha, share/list,
	share/list.sparc: remove busybox as default shell. Only use it as the
	interactive shell on tty2

2001/07/03  dam's  <damien@mandrakesoft.com>

	* network/adsl.pm, network/netconnect_consts.pm, network/tools.pm,
	network/modem.pm, network/netconnect.pm, network/isdn.pm: network
	subsystem now compiles. Enjoy

	* docs/net_object_class.fig: documentation about net modules structure

2001/07/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* network/netconnect.pm: fix another dam's sucks
	fix dam's sucks

	* network/netconnect_consts.pm, Makefile.config: fix dam's sucks

	* standalone/XFdrake: expert is allowed to choose frame buffer.

	* install_steps_interactive.pm: added loadSavePackagesOnFloppy to manage
	package selection file used by
	auto_install too from packages tree directly on floppies.

	* share/floppy.png: updated size to 16x22 to be more aligned.
	for loading/saving packages selection.

	* install_any.pm: modified g_default_packages to be used from package tree
	save on floppy.

	* install_steps_gtk.pm: added Load/Save on floppy.
	added improve choice of package, well not very usefull but asked by
	higher
	people :-)

2001/07/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/rp-pppoe/gui/html/props-basic.png,
	mdk-stage1/rp-pppoe/gui/html/props-options.png,
	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
	mdk-stage1/rp-pppoe/gui/html/props-nic.png: plop

	* modules.pm, mdk-stage1/probing.h, mdk-stage1/.cvsignore,
	mdk-stage1/usb-resource/Makefile,
	mdk-stage1/usb-resource/update-usb-ids.pl, mdk-stage1/Makefile,
	mdk-stage1/usb-resource/.cvsignore, mdk-stage1/probing.c: add support
	for install from USB Network Adapters

2001/07/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/es.po,
	share/po/fr.po, share/po/sr.po, share/po/de.po, share/po/el.po,
	share/po/et.po, share/po/sk.po, share/po/tr.po, share/po/eu.po,
	share/po/ru.po, share/po/sl.po, share/po/vi.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/wa.po, share/po/da.po,
	share/po/sv.po, share/po/zh_TW.Big5.po: updated Danish file

2001/07/03  Pixel  <pixel@mandrakesoft.com>

	* timezone.pm (configureTimezone): propose a list of NTP servers
	(ntp_server): fix
	add ntp handling

	* fs.pm (mount): fix fsck.ext2'ing
	(mount): add fsck.ext2 before ext2-mounting

	* share/themes/DarkMarble-gloom2.png: re-adding with -kb
	re-adding with -kb

	* pixmaps/user.png: re-adding with -kb
	removing for re-adding with -kb
	re-adding with -kb
	removing for re-adding with -kb

	* share/themes/blueHeart-button4.png, share/reload.png,
	share/themes/focus.png, share/themes/DarkMarble-button3_in.png,
	share/logo-mandrake.png, share/themes/marble3d-check1.png,
	share/themes/blueHeart-button_def.png, share/rpm-semiselected.png,
	share/logo-mandrake-Desktop.png, share/themes/marble3d-check2.png,
	share/rpm-installed.png, share/themes/marble3d-button1.png,
	share/logo-mandrake_sav.png, share/themes/mdk-button1.png,
	share/themes/DarkMarble-check_off.png, pixmaps/harddrive.png,
	share/themes/marble3d-button_def.png, share/themes/marble3d-button2.png,
	share/help_sav.png, share/themes/DarkMarble-button3_out_prelight.png,
	pixmaps/services.png, pixmaps/bootdisk.png, share/rpm-selected.png,
	share/themes/marble3d-button4.png, pixmaps/bootloader.png,
	share/themes/DarkMarble-button3_out.png, share/logo-mandrake_trans.png,
	share/themes/mdk-button4.png, pixmaps/printer.png, share/rpm-base.png,
	share/logo-mandrake2.png, share/themes/blueHeart-brown_bg1.png,
	share/themes/marble3d-bg1.png, pixmaps/security.png, share/ftin.png,
	pixmaps/rootpasswd.png, share/help.png,
	share/themes/DarkMarble-check_on.png,
	share/themes/blueHeart-button1.png, pixmaps/keyboard.png,
	pixmaps/default.png, share/themes/blueHeart-button2.png, pixmaps/X.png,
	share/themes/DarkMarble-button3_in_prelight.png, share/ftout.png,
	pixmaps/mouse.png, share/rpm-unselected.png: re-adding with -kb
	removing for re-adding with -kb

	* install_any.pm, install_steps.pm: add ntp handling

	* tools/addchangelog.pl: reverted the last erroneous modif
	re-adding with -kb

	* tools/ntp_servers.pl: get a formatted list of NTP servers from an
	authorised source

	* install_steps_interactive.pm (doPartitionDisks): better error message
	when no root partition is found
	(configureTimezone): propose a list of NTP servers
	add ntp handling

	* docs/comparisons: re-adding with -kb

2001/07/02  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm: new network sources reorganizationCVS:
	----------------------------------------------------------------------

	* share/list: added modinfo

	* modparm.pm: syntax correction

	* network/netconnect_consts.pm, network.pm, standalone/draknet,
	network/tools.pm, netconnect.pm, network/netconnect.pm,
	network/ethernet.pm, network/isdn.pm, network/adsl.pm,
	network/network.pm, network/modem.pm, netconnect_consts.pm: new network
	sources reorganization

2001/07/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: update po files

2001/07/02  Pixel  <pixel@mandrakesoft.com>

	* crypto.pm: remove buggy prototype

	* share/po/Makefile: yet even better i18n strings extraction
	  - fix to add some missing messages
	  - add more verif

	* c/stuff.xs.pm: use size_t instead of int where it should

	* Xconfigurator.pm (write_XF86Config): fix fpons sucks (multi wacoms in
	XF3)

	* share/po/b_dump_strings.pm: high level i18n messages getting. only
	partial stuff. Used only for verification

	* perl2fcalls: add handling of using pkg::func when func is provided by
	pkg2 use'd by pkg

2001/06/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po: updated Indonesian file

2001/06/25  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm: switch from llseek to lseek64

2001/06/23  siegel

	* share/po/de.po: new german version

2001/06/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: take care of enterprise kernel if installed.

	* install_any.pm: automagically install kernel-enterprise if memory is
	greater than 800MB.

2001/06/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: unfuzzyise

2001/06/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, tinyfirewall.pm,
	share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, help.pm, share/po/zh_TW.Big5.po,
	share/po/it.po, share/po/id.po, install_steps_interactive.pm,
	share/po/pl.po, share/po/no.po, share/po/fi.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	install_steps_gtk.pm, share/po/sk.po, share/po/lt.po, share/po/ar.po,
	share/po/sl.po, bootlook.pm, share/po/vi.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	install_steps_newt.pm, share/po/af.po: s/Linux-Mandrake/Mandrake Linux/

2001/06/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added minimal support for rpmtools >= 3.0

2001/06/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: generate_automatic_stage1_params: listize
	use busybox for the shell of stage2

	* mdk-stage1/Makefile: defaults to not spawn shell

	* mdk-stage1/hack: kloug

	* Makefile, tools/i386/busybox, share/list.ppc, share/list,
	share/list.alpha, share/aliases: use busybox for the shell of stage2

2001/06/21  Pixel  <pixel@mandrakesoft.com>

	* docs/README, rescue/tree/etc/issue: s/Linux-Mandrake/Mandrake Linux/
	s/linux-mandrake/mandrakesoft/
	(hand made, no i18n messages done)
	s/Linux-Mandrake/Mandrake Linux/
	s/linux-mandrake/mandrakesoft/
	(hand made, no i18n messages done)

	* genmodparm: remove duplicate, look in gi/tools

	* standalone/printerdrake, install2, docs/HACKING, tools/genmodparm,
	mdk-stage1/config-stage1.h, ChangeLog, resize_fat/README,
	standalone/diskdrake, standalone/XFdrake, rescue/tree/etc/rc.sysinit,
	mdk-stage1/init.c, tools/mailchangelog.pl, detect_devices.pm,
	mdk-stage1/doc/README, resize_fat/main.pm, tools/cvslog2changelog.pl,
	bootloader.pm: s/Linux-Mandrake/Mandrake Linux/
	s/linux-mandrake/mandrakesoft/
	(hand made, no i18n messages done)

	* mdk-stage1/make_boot_img: remove GG sux
	s/Linux-Mandrake/Mandrake Linux/
	s/linux-mandrake/mandrakesoft/
	(hand made, no i18n messages done)

2001/06/11  dam's  <damien@mandrakesoft.com>

	* proxy.pm: updated
	typoCVS:
	----------------------------------------------------------------------
	proxy

	* my_gtk.pm: added gtkset_layout

	* standalone/drakproxy: corrected CVS:
	----------------------------------------------------------------------
	updated
	perlised

	* interactive.pm: no icon if wizard

2001/06/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator_consts.pm: added some bigger memory range.

	* Xconfigurator.pm: fix missing newline on /etc/X11/glx.conf when
	modifying mga_dma = 0
	really fix the Matrox G200 PCI card acceleration using XF3, by disabling
	DMA on
	/etc/X11/glx.conf
	added magic probe of resolution found, if the probed resolution seems
	strange
	according to memory available, it try to let the user select the right
	resolution and depth.

	* install_steps.pm, printer.pm: applied patches given for printer
	configuration bug reported by David Eastcott.

2001/06/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: have PPP drivers in net_raw rather than in net
	add PPP modules for 'net' drivers

	* rescue/tree/etc/rc.sysinit: minor changes

	* rescue/tree/etc/inittab, rescue/tree/sbin/fakeshutdown: umount as much
	as possible before rebooting the rescue

	* mdk-stage1/ppp/pppd/magic.c, mdk-stage1/ppp/pppd/md5.c,
	mdk-stage1/ppp/pppd/utils.c, mdk-stage1/ppp/pppd/pathnames.h,
	mdk-stage1/ppp/pppd/options.c, mdk-stage1/ppp/pppd/main.c,
	mdk-stage1/ppp/pppd/multilink.c, mdk-stage1/ppp/pppd/auth.c: have adsl
	pppoe installation available
	Initial revision
	import initial ppp sources

	* mdk-stage1/dhcp.c: change location of error message when no reply
	received

	* mdk-stage1/rp-pppoe/man/pppoe-relay.8,
	mdk-stage1/rp-pppoe/configs/firewall-masq,
	mdk-stage1/rp-pppoe/gui/html/props-nic.png,
	mdk-stage1/rp-pppoe/src/pppoe-sniff.c,
	mdk-stage1/rp-pppoe/configs/firewall-standalone,
	mdk-stage1/rp-pppoe/gui/html/tkpppoe.html,
	mdk-stage1/rp-pppoe/doc/KERNEL-MODE-PPPOE, mdk-stage1/rp-pppoe/go-gui,
	mdk-stage1/rp-pppoe/gui/tkpppoe.in, mdk-stage1/rp-pppoe/man/adsl-stop.8,
	mdk-stage1/rp-pppoe/scripts/adsl-start.in,
	mdk-stage1/rp-pppoe/man/pppoe-sniff.8, mdk-stage1/rp-pppoe/go,
	mdk-stage1/rp-pppoe/man/pppoe.8,
	mdk-stage1/rp-pppoe/gui/html/mainwin-nonroot.png,
	mdk-stage1/rp-pppoe/gui/tkpppoe.1, mdk-stage1/rp-pppoe/src/Makefile.in,
	mdk-stage1/rp-pppoe/src/pppoe.c, mdk-stage1/rp-pppoe/src/pppoe-server.c,
	mdk-stage1/rp-pppoe/src/pppoe.h, mdk-stage1/rp-pppoe/gui/wrapper.c,
	mdk-stage1/rp-pppoe/man/pppoe-server.8,
	mdk-stage1/rp-pppoe/configs/pppoe.conf,
	mdk-stage1/rp-pppoe/gui/html/props-advanced.png,
	mdk-stage1/rp-pppoe/src/common.c, mdk-stage1/rp-pppoe/src/install-sh,
	mdk-stage1/rp-pppoe/doc/LICENSE, mdk-stage1/rp-pppoe/src/configure,
	mdk-stage1/rp-pppoe/src/config.h.in, mdk-stage1/rp-pppoe/src/relay.c,
	mdk-stage1/rp-pppoe/src/discovery.c, mdk-stage1/rp-pppoe/src/if.c,
	mdk-stage1/rp-pppoe/doc/CHANGES, mdk-stage1/rp-pppoe/src/relay.h,
	mdk-stage1/rp-pppoe/scripts/adsl-init.in,
	mdk-stage1/rp-pppoe/rp-pppoe.spec,
	mdk-stage1/rp-pppoe/scripts/adsl-connect.in,
	mdk-stage1/rp-pppoe/man/pppoe.conf.5,
	mdk-stage1/rp-pppoe/scripts/adsl-init-turbolinux.in,
	mdk-stage1/rp-pppoe/man/adsl-start.8,
	mdk-stage1/rp-pppoe/gui/html/mainwin.png,
	mdk-stage1/rp-pppoe/rp-pppoe-gui.spec,
	mdk-stage1/rp-pppoe/gui/html/props-basic.png,
	mdk-stage1/rp-pppoe/man/adsl-status.8,
	mdk-stage1/rp-pppoe/configs/pppoe-server-options,
	mdk-stage1/rp-pppoe/man/adsl-connect.8,
	mdk-stage1/rp-pppoe/scripts/adsl-setup.in,
	mdk-stage1/rp-pppoe/scripts/adsl-stop.in,
	mdk-stage1/rp-pppoe/gui/Makefile.in, mdk-stage1/rp-pppoe/src/debug.c,
	mdk-stage1/rp-pppoe/doc/PROBLEMS, mdk-stage1/rp-pppoe/src/ppp.c,
	mdk-stage1/rp-pppoe/README,
	mdk-stage1/rp-pppoe/gui/html/mainwin-busy.png,
	mdk-stage1/rp-pppoe/gui/pppoe-wrapper.1,
	mdk-stage1/rp-pppoe/scripts/adsl-status,
	mdk-stage1/rp-pppoe/man/adsl-setup.8,
	mdk-stage1/rp-pppoe/gui/html/props-options.png,
	mdk-stage1/rp-pppoe/src/configure.in,
	mdk-stage1/rp-pppoe/configs/pap-secrets, mdk-stage1/rp-pppoe/src/md5.c,
	mdk-stage1/rp-pppoe/scripts/adsl-init-suse.in,
	mdk-stage1/rp-pppoe/src/md5.h, mdk-stage1/rp-pppoe/src/plugin.c,
	mdk-stage1/rp-pppoe/doc/HOW-TO-CONNECT: Initial revision
	import initial sources from rp-pppoe v3.0

	* mdk-stage1/Makefile: change handling of .depend in Makefile
	have adsl pppoe installation available

	* mdk-stage1/newt-frontend.c: axalon sucks, we can have NEWT_FLAG_PASSWORD
	that will show us '**' for passwords

	* mdk-stage1/ppp/pppd/.cvsignore, mdk-stage1/ppp/.cvsignore,
	mdk-stage1/ppp/pppd/Makefile, mdk-stage1/rp-pppoe/src/.cvsignore,
	mdk-stage1/rp-pppoe/src/config.h, mdk-stage1/adsl.c,
	mdk-stage1/rp-pppoe/.cvsignore, mdk-stage1/rp-pppoe/src/Makefile,
	mdk-stage1/make_boot_img: have adsl pppoe installation available

	* detect_devices.pm, install_any.pm, raid.pm, fsedit.pm: include patch to
	autodetect raid arrays (still needs a kernel that implements the
	ioctl..)

	* tools/Makefile: perl 5.6.1 now

	* mdk-stage1/stage1.c, mdk-stage1/tools.c: do not set root=/dev/ram3 from
	my code anymore, expect the bootloader to set the parameter correctly

	* mdk-stage1/ppp/scripts/ip-up.local.add, mdk-stage1/ppp/scripts/README,
	mdk-stage1/ppp/solaris/Makefile.sol2,
	mdk-stage1/ppp/svr4/ppp_comp.Master, mdk-stage1/ppp/sample/ip-down,
	mdk-stage1/ppp/solaris/Makefile.sol2-64,
	mdk-stage1/ppp/include/net/ppp_defs.h,
	mdk-stage1/ppp/pppstats/Makefile.sunos4,
	mdk-stage1/ppp/chat/Makefile.sol2, mdk-stage1/ppp/pppd/sys-linux.c,
	mdk-stage1/ppp/pppd/ipxcp.c, mdk-stage1/ppp/pppd/ipxcp.h,
	mdk-stage1/ppp/pppdump/deflate.c, mdk-stage1/ppp/pppd/Makefile.linux,
	mdk-stage1/ppp/pppd/upap.c, mdk-stage1/ppp/modules/deflate.c,
	mdk-stage1/ppp/README.sunos4, mdk-stage1/ppp/pppdump/Makefile.sol2,
	mdk-stage1/ppp/configure, mdk-stage1/ppp/pppd/upap.h,
	mdk-stage1/ppp/svr4/ppp_mod.c, mdk-stage1/ppp/pppstats/Makefile.sol2,
	mdk-stage1/ppp/pppd/ipv6cp.c, mdk-stage1/ppp/scripts/options-ssh-loc,
	mdk-stage1/ppp/pppd/plugins/Makefile.sol2, mdk-stage1/ppp/pppd/ipv6cp.h,
	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.vt.c,
	mdk-stage1/ppp/solaris/ppp_ahdlc_mod.c,
	mdk-stage1/ppp/sunos4/if_ppp_vdcmd.c,
	mdk-stage1/ppp/solaris/ppp_ahdlc.c, mdk-stage1/ppp/pppd/magic.h,
	mdk-stage1/ppp/svr4/ppp_comp_mod.c,
	mdk-stage1/ppp/include/linux/if_ppp.h, mdk-stage1/ppp/pppd/eui64.c,
	mdk-stage1/ppp/scripts/secure-card, mdk-stage1/ppp/scripts/redialer,
	mdk-stage1/ppp/modules/bsd-comp.c, mdk-stage1/ppp/pppd/eui64.h,
	mdk-stage1/ppp/sunos4/ppp_vdcmd.c, mdk-stage1/ppp/modules/ppp_mod.h,
	mdk-stage1/ppp/pppd/md5.h, mdk-stage1/ppp/pppd/chap_ms.c,
	mdk-stage1/ppp/pppd/chap_ms.h, mdk-stage1/ppp/etc.ppp/pap-secrets,
	mdk-stage1/ppp/solaris/Makefile.top, mdk-stage1/ppp/chat/chat.8,
	mdk-stage1/ppp/svr4/Makefile.sol2-64, mdk-stage1/ppp/svr4/Makefile.sol2,
	mdk-stage1/ppp/include/net/ppp-comp.h, mdk-stage1/ppp/sunos4/Makefile,
	mdk-stage1/ppp/PLUGINS, mdk-stage1/ppp/pppdump/Makefile.sunos4,
	mdk-stage1/ppp/sample/ip-up, mdk-stage1/ppp/sample/options.ttyXX,
	mdk-stage1/ppp/scripts/options-rsh-rem, mdk-stage1/ppp/pppd/fsm.c,
	mdk-stage1/ppp/chat/chat.c, mdk-stage1/ppp/scripts/ppp-on-rsh,
	mdk-stage1/ppp/pppd/fsm.h, mdk-stage1/ppp/pppd/tdb.c,
	mdk-stage1/ppp/pppd/patchlevel.h, mdk-stage1/ppp/pppstats/pppstats.8,
	mdk-stage1/ppp/svr4/ppp.conf, mdk-stage1/ppp/pppd/tdb.h,
	mdk-stage1/ppp/pppd/demand.c, mdk-stage1/ppp/include/net/if_ppp.h,
	mdk-stage1/ppp/solaris/Makedefs, mdk-stage1/ppp/modules/if_ppp.c,
	mdk-stage1/ppp/include/net/slcompress.h, mdk-stage1/ppp/sunos4/Makedefs,
	mdk-stage1/ppp/pppd/sys-linux.c.wtmp,
	mdk-stage1/ppp/include/linux/if_pppvar.h,
	mdk-stage1/ppp/solaris/ppp_comp.c, mdk-stage1/ppp/chat/Makefile.linux,
	mdk-stage1/ppp/README.cbcp, mdk-stage1/ppp/pppd/ppp.pam,
	mdk-stage1/ppp/solaris/ppp_comp_mod.c, mdk-stage1/ppp/Changes-2.3,
	mdk-stage1/ppp/sample/options, mdk-stage1/ppp/pppstats/pppstats.c,
	mdk-stage1/ppp/sunos4/ppp_comp_vdcmd.c,
	mdk-stage1/ppp/pppdump/Makefile.linux.pppdump-Makefile,
	mdk-stage1/ppp/README.MSCHAP80, mdk-stage1/ppp/pppdump/pppdump.8,
	mdk-stage1/ppp/sunos4/Makefile.top, mdk-stage1/ppp/include/net/pppio.h,
	mdk-stage1/ppp/pppd/ipcp.c, mdk-stage1/ppp/FAQ,
	mdk-stage1/ppp/pppd/ipcp.h, mdk-stage1/ppp/pppd/sys-sunos4.c,
	mdk-stage1/ppp/modules/ppp_comp.c, mdk-stage1/ppp/README.sol2,
	mdk-stage1/ppp/modules/vjcompress.c, mdk-stage1/ppp/scripts/ppp-on-ssh,
	mdk-stage1/ppp/svr4/ppp_ahdlc_mod.c, mdk-stage1/ppp/sunos4/ppp.INSTALL,
	mdk-stage1/ppp/modules/ppp.c, mdk-stage1/ppp/pppdump/pppdump.c,
	mdk-stage1/ppp/pppd/plugins/passprompt.c,
	mdk-stage1/ppp/pppdump/Makefile.linux, mdk-stage1/ppp/pppd/lcp.c,
	mdk-stage1/ppp/pppd/lcp.h, mdk-stage1/ppp/scripts/chat-callback,
	mdk-stage1/ppp/chat/Makefile.sunos4, mdk-stage1/ppp/SETUP,
	mdk-stage1/ppp/pppd/Makefile.sol2,
	mdk-stage1/ppp/pppd/plugins/minconn.c,
	mdk-stage1/ppp/etc.ppp/options.options,
	mdk-stage1/ppp/pppdump/Makefile.linux.makeopt,
	mdk-stage1/ppp/svr4/ppp.Node, mdk-stage1/ppp/scripts/options-ssh-rem,
	mdk-stage1/ppp/solaris/ppp.c, mdk-stage1/ppp/svr4/ppp.System,
	mdk-stage1/ppp/etc.ppp/chap-secrets,
	mdk-stage1/ppp/pppstats/Makefile.linux,
	mdk-stage1/ppp/sample/pap-secrets,
	mdk-stage1/ppp/pppd/Makefile.linux.make, mdk-stage1/ppp/pppd/pppd.8,
	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.8,
	mdk-stage1/ppp/pppd/Makefile.sunos4, mdk-stage1/ppp/scripts/ppp-on,
	mdk-stage1/ppp/include/linux/ppp_defs.h,
	mdk-stage1/ppp/scripts/chatchat/chatchat.c,
	mdk-stage1/ppp/scripts/chatchat/README,
	mdk-stage1/ppp/modules/ppp_ahdlc.c, mdk-stage1/ppp/svr4/ppp.Master,
	mdk-stage1/ppp/svr4/Makedefs,
	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.gtk.c,
	mdk-stage1/ppp/svr4/ppp_ahdl.System, mdk-stage1/ppp/pppd/pppd.h,
	mdk-stage1/ppp/scripts/ppp-off, mdk-stage1/ppp/solaris/Makedefs.sol2,
	mdk-stage1/ppp/common/zlib.c, mdk-stage1/ppp/scripts/options-rsh-loc,
	mdk-stage1/ppp/common/zlib.h, mdk-stage1/ppp/solaris/ppp_mod.c,
	mdk-stage1/ppp/contrib/pppgetpass/Makefile.linux,
	mdk-stage1/ppp/solaris/ppp_mod.h, mdk-stage1/ppp/scripts/ppp-on-dialer,
	mdk-stage1/ppp/pppd/sys-solaris.c, mdk-stage1/ppp/README.linux,
	mdk-stage1/ppp/sample/auth-down, mdk-stage1/ppp/svr4/ppp_ahdl.Master,
	mdk-stage1/ppp/pppdump/zlib.c, mdk-stage1/ppp/include/pcap-int.h,
	mdk-stage1/ppp/pppdump/zlib.h, mdk-stage1/ppp/pppd/ccp.c,
	mdk-stage1/ppp/chat/Makefile.linux.makeopt, mdk-stage1/ppp/pppd/ccp.h,
	mdk-stage1/ppp/pppd/Makefile.linux.makeopt,
	mdk-stage1/ppp/include/net/vjcompress.h, mdk-stage1/ppp/pppd/cbcp.c,
	mdk-stage1/ppp/contrib/pppgetpass/pppgetpass.sh,
	mdk-stage1/ppp/pppd/cbcp.h, mdk-stage1/ppp/scripts/ip-down.local.add,
	mdk-stage1/ppp/pppd/tty.c, mdk-stage1/ppp/include/linux/ppp-comp.h,
	mdk-stage1/ppp/sample/auth-up, mdk-stage1/ppp/sunos4/ppp_ahdlc_vdcmd.c,
	mdk-stage1/ppp/pppd/pppd.h.wtmp, mdk-stage1/ppp/solaris/ppp.conf,
	mdk-stage1/ppp/pppd/chap.c, mdk-stage1/ppp/pppd/chap.h,
	mdk-stage1/ppp/scripts/callback, mdk-stage1/ppp/linux/Makefile.top,
	mdk-stage1/ppp/svr4/ppp_comp.System, mdk-stage1/ppp/pppd/md4.c,
	mdk-stage1/ppp/svr4/Makedefs.sol2, mdk-stage1/ppp/pppdump/bsd-comp.c,
	mdk-stage1/ppp/README, mdk-stage1/ppp/pppd/md4.h,
	mdk-stage1/ppp/etc.ppp/options, mdk-stage1/ppp/svr4/Makefile.top,
	mdk-stage1/ppp/svr4/Makefile.svr4,
	mdk-stage1/ppp/pppd/plugins/Makefile.linux,
	mdk-stage1/ppp/pppdump/ppp-comp.h: Initial revision
	import initial ppp sources

2001/06/11  odin

	* standalone/drakproxy: first import of drakproxy

2001/06/11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): don't check /usr/bin/urpmi, better check
	/usr/sbin/urpmi.update

	* commands.pm (grep_): add a missing semi-colon

	* share/compssUsers: remove NIS which is handled by DrakX (titi sucks)

2001/06/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/guessmounts, rescue/make_rescue_img, rescue/tree/etc/rc.sysinit,
	rescue/Makefile: 
	  - add 'guessmounts' that mimics RH's detecting of partitions when
	rescue starts

2001/06/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: updated Azeri file

	* share/po/ru.po, share/po/DrakX.pot: updated Russian file

2001/06/10  Pixel  <pixel@mandrakesoft.com>

	* rescue/guessmounts: pixelization (tested!)

	* install_any.pm (g_auto_install): more comments in auto_inst.cfg file

2001/06/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/list.i386: rescuept is in /sbin now

	* share/list: rescuept in /sbin now

2001/06/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: don't wait on upping lo interface

	* mdk-stage1/modules.c: fix minor bug detecting when modules are present

	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/random.c:
	i need working random suite for ppp with dietlibc

	* mdk-stage1/stage1.c: exit when exec fails after fork, i don't want two
	stage1 processes!

2001/06/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pl.po: updated Polish file

2001/06/05  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (mount): notail in any case

	* tools/i386/netboot/menu.lst.example, tools/i386/netboot/menu.lst,
	tools/i386/netboot/.cvsignore: menu.lst is now a local file created from
	the example

	* share/list, rescue/list.i386, rescue/list: switch to perl 5.6.1

	* Makefile: fix

2001/06/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/ar.po, share/po/sl.po,
	share/po/vi.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated Russian file

2001/06/01  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: use -FULL postfix for common .c files targetting
	stage1-full

	* mdk-stage1/stage1.c: minor fix

	* mdk-stage1/newt/textbox.c: don't modify newt code to fix dietlibc bugs,
	i want to link against glibc too

	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/dietlibc/lib/strncat.c:
	
	  - have strncat behave the same way as in glibc
	  - declare that we're using the DIETLIBC in include/stdlib.h, so I can
	change my mind in "dns.c" to handle broken glibc which is not capable of
	doing name resolution with a static binary

	* mdk-stage1/dns.c, mdk-stage1/dns.h, mdk-stage1/adsl.c,
	mdk-stage1/adsl.h, mdk-stage1/nfsmount.c, mdk-stage1/network.c,
	mdk-stage1/url.c, mdk-stage1/network.h: 
	  - first draft of adsl support
	  - get back some code for supporting broken glibc unable to resolve
	when linked statically

	* mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/lib/tcflush.c,
	mdk-stage1/dietlibc/lib/cfgetospeed.c, mdk-stage1/dietlibc/lib/speed.c,
	mdk-stage1/dietlibc/lib/tcsetattr.c,
	mdk-stage1/dietlibc/include/termios.h,
	mdk-stage1/dietlibc/include/netdb.h,
	mdk-stage1/dietlibc/libshell/glob.c: slight modifs to get ppp and pppoe
	stuff compile better

2001/05/31  daouda

	* bootlook.pm: add runlevel chooser feature

2001/05/31  Pixel  <pixel@mandrakesoft.com>

	* rescue/make_rescue_img: check presence of files from list and list.ARCH

	* Makefile (get_needed_files): exit with error message if files from
	share/list (and
	share/list.ARCH) are missing

	* install2.pm: hide step formatPartitions when upgrading

2001/05/30  mbadaire

	* mdk-stage1/stage1.c, mdk-stage1/slang/slmalloc.c,
	mdk-stage1/slang/Makefile, mdk-stage1/Makefile.common,
	mdk-stage1/insmod-modutils/obj/Makefile,
	mdk-stage1/insmod-modutils/Makefile, mdk-stage1/bzlib/Makefile,
	mdk-stage1/init-libc-headers.h, mdk-stage1/newt/Makefile,
	mdk-stage1/Makefile, mdk-stage1/insmod-modutils/util/Makefile,
	mdk-stage1/mar/Makefile, mdk-stage1/newt/windows.c: 
	  - allow build on ia64
	  - have CFLAGS centralized in Makefile.common (should help ports such
	as alpha)
	  - better looking sub makefiles

2001/05/30  Pixel  <pixel@mandrakesoft.com>

	* Makefile.drakxtools (install): ensure pm's in subdirs don't have
	/use(diagnostics|vars|strict)/

2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
	name for lpr.

2001/05/29  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* share/compssUsers: add NIS client to network clients

2001/05/29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added fix from Michael Brown to handle pipe in queue
	name for lpr.

2001/05/28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/newt-frontend.c: use Axalon patch to hide passwords (highly
	rewritten..)

2001/05/25  Stew Benedict  <sbenedict@mandrakesoft.com>

	* rescue/list.ppc, bootloader.pm: add hfs support to rescue - PPC, fix
	bootstrap creation, formatting sequence

	* install_steps_interactive.pm: fix bootstrap information screen back to
	orig with missing ":" - PPC
	add hfs support to rescue - PPC, fix bootstrap creation, formatting
	sequence

2001/05/25  siegel

	* share/po/de.po: updated time
	moved to UTF-8

2001/05/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

2001/05/24  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (g_auto_install): autoExitInstall set if not replay (was
	the opposite)

2001/05/23  Pixel  <pixel@mandrakesoft.com>

	* rescue/list: add scd0...

2001/05/22  siegel

	* share/po/de.po: updates

2001/05/21  Stew Benedict  <sbenedict@mandrakesoft.com>

	* tools/ppc/mkhybrid-1.12b5.4-x86, tools/ppc/mkINSTALLCD: enable creation
	of PPC boot CD on x86 platform

2001/05/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: 
	  - better detect when IP is not good
	  - error_msg when netmask seems invalid
	  - don't log too much `guessing netmask'

	* mdk-stage1/probing.c: be sure to print pci vendor and id with 4 digits
	each

2001/05/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed parted that ask for confirmation if partition
	table is not right (MAXDATA
	for example), this cause parted to ignore warning.
	added blank space between partition windows and linux to help resolving
	above case.
	fixed hole in partitionning (need testing), use fdisk to get disk
	geometry and
	create partition that matches cylinder boundaries (no more
	approximation).
	make sure to create all partitions including /home.

2001/05/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/modules.c: add log for modules aliasing of SCSI drivers
	don't write nonsense code to separate frontend from stage1,
	but rather, try to do some clever things

	* mdk-stage1/probing.c: unify user notification of network and scsi
	devices that make load of drivers
	don't write nonsense code to separate frontend from stage1,
	but rather, try to do some clever things

	* mdk-stage1/stage1.c, mdk-stage1/frontend.h, mdk-stage1/stage1.h,
	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
	mdk-stage1/Makefile, mdk-stage1/dhcp.c, mdk-stage1/newt-frontend.c,
	mdk-stage1/disk.c, mdk-stage1/network.c: don't write nonsense code to
	separate frontend from stage1,
	but rather, try to do some clever things

	* mdk-stage1/frontend-common.c: plop

2001/05/16  dam's  <damien@mandrakesoft.com>

	* pixmaps/bootloader.png, pixmaps/user.png, pixmaps/security.png,
	pixmaps/rootpasswd.png, pixmaps/harddrive.png, pixmaps/keyboard.png,
	pixmaps/default.png, pixmaps/X.png, pixmaps/mouse.png,
	pixmaps/bootdisk.png, pixmaps/services.png: added icons

	* standalone/printerdrake, standalone/keyboarddrake, standalone/drakboot,
	standalone/draksec, standalone/drakxservices, standalone/drakgw,
	standalone/XFdrake, standalone/adduserdrake: added icon management

	* my_gtk.pm, interactive.pm: icons management

	* install2.pm: added icons management

	* standalone/draknet: added icon managment

	* pixmaps/printer.png: added icon

2001/05/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: added support for /var creation, and more specific
	package selection for server.
	Include option support by VERSION file.

2001/05/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/HACKING, mdk-stage1/frontend.h,
	mdk-stage1/TECH-INFOS, mdk-stage1/WHY-DIETLIBC, mdk-stage1/stage1.h,
	mdk-stage1/stdio-frontend.c, mdk-stage1/Makefile, mdk-stage1/README,
	mdk-stage1/newt-frontend.c: have a 100% independence between UI stuff
	and code from stage1

2001/05/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po, share/po/de.po, share/po/DrakX.pot, share/po/tr.po:
	updated Turkish file

2001/05/16  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile: fix yet again DrakX.pot making

	* partition_table.pm: re-add reiserfs as it should
	add xfs

2001/05/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: added missing Aurora, added icewm-light that may be
	usefull.

2001/05/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: libresolv deprecated in GLIBC
	have stage1-full with pcmcia also compile with dietlibc, cool!

	* mdk-stage1/network.c: fix guess netmask
	configure_net_device is only used internally

	* mdk-stage1/modules.c, mdk-stage1/modules.h: better modules handling
	interface (use of enum rather than guessing single numbers..)

	* mdk-stage1/newt-frontend.c: allow wait_message calls to be multi-lines

	* mdk-stage1/pcmcia/cardmgr.c: have stage1-full with pcmcia also compile
	with dietlibc, cool!
	  - build glibc and dietlibc targets
	  - bzero string buffer before sscanf call (dietlibc implementation)
	  - verify returns of ioperm so that I can use it in test mode

	* mdk-stage1/dietlibc/include/sys/file.h,
	mdk-stage1/dietlibc/include/sys/io.h,
	mdk-stage1/dietlibc/syscalls.s/ioperm.S: have stage1-full with pcmcia
	also compile with dietlibc, cool!

	* mdk-stage1/stage1.c: a bit of size reduction plus some language change
	blurk

	* mdk-stage1/WHY-DIETLIBC: advocate dietlibc

	* mdk-stage1/dietlibc/lib/vsscanf.c: import vsscanf fix from author

	* mdk-stage1/disk.c: bzero string buffer before sscanf call, security for
	dietlibc implementation

	* mdk-stage1/network.h: configure_net_device is only used internally

	* mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/pcmcia_probe.c: 
	  - build glibc and dietlibc targets
	  - bzero string buffer before sscanf call (dietlibc implementation)
	  - verify returns of ioperm so that I can use it in test mode

	* standalone/drakgw: full path for iptables

	* mdk-stage1/probing.c: allow wait_message calls to be multi-lines
	nicer layout for PCI detection messages
	better modules handling interface (use of enum rather than guessing
	single numbers..)

2001/05/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po, share/po/ar.po: Updated Turkish file

	* share/keyboards.tar.bz2: Added north-african keyboard

	* keyboard.pm: added arabic azerty keyboard

2001/05/15  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile: fix messages to i18n extracting

2001/05/14  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* fs.pm: s|mkxfs|mkfs.xfs|;

2001/05/14  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/nfsmount.c: use new gethostby* interface

	* mdk-stage1/stage1-data/stage1-with-busybox.tar.bz2: add stage1-data
	which provides the busybox

	* mdk-stage1/network.c: Have the wait_message() with the sleep()
	  - complies to gethostby functions
	  - add sleep(2) so that net intf is really up before operation
	  - more logs
	  - FTP: don't try to close control connection with data socket, erhm
	:-(
	  - debug netmask guessing, with stdio-frontend

	* mdk-stage1/Makefile: i can compile slang and newt with dietlibc now
	every targets build with dietlibc

	* mdk-stage1/make_boot_img: use busybox for my debugging purpose

	* mdk-stage1/tools.c: no need to poll() for data at beginning of
	load_ramdisk_fd, it was a fix of another problem (bug with file stdio
	operations with sockets in dietlibc)

	* mdk-stage1/dietlibc/Makefile: build this new dietlibc
	import new version of dietlibc

	* mdk-stage1/dns.c, mdk-stage1/dns.h: now use gethostby* functions
	provided by dietlibc

	* mdk-stage1/url.c: use poll() rather than select(), smaller code size

	* mdk-stage1/stage1.c: we don't use this sucking sash no more
	we now use `busybox' compiled with the marvellous dietlibc, which
	provides no less than 73 usefull binaries

	* mdk-stage1/dietlibc/alpha/semop.S, mdk-stage1/dietlibc/lib/sendmsg.c,
	mdk-stage1/dietlibc/alpha/shmget.S, mdk-stage1/dietlibc/lib/clearerr.c,
	mdk-stage1/dietlibc/include/sys/ipc.h,
	mdk-stage1/dietlibc/alpha/sendmsg.S,
	mdk-stage1/dietlibc/lib/tcgetpgrp.c, mdk-stage1/dietlibc/lib/fwrite.c,
	mdk-stage1/dietlibc/sparc/__testandset.S,
	mdk-stage1/dietlibc/syscalls.s/open.S,
	mdk-stage1/dietlibc/alpha/semget.S, mdk-stage1/dietlibc/dietstdarg.h,
	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_max.S,
	mdk-stage1/dietlibc/lib/nop.c, mdk-stage1/dietlibc/start.h,
	mdk-stage1/dietlibc/include/sys/syscall.h,
	mdk-stage1/dietlibc/alpha/accept.S, mdk-stage1/dietlibc/lib/sigjmp.c,
	mdk-stage1/dietlibc/syscalls.s/ptrace.s,
	mdk-stage1/dietlibc/lib/isprint.c,
	mdk-stage1/dietlibc/syscalls.s/dietstat.S,
	mdk-stage1/dietlibc/alpha/shutdown.S, mdk-stage1/dietlibc/lib/sendto.c,
	mdk-stage1/dietlibc/sparc/shmat.c, mdk-stage1/dietlibc/include/time.h,
	mdk-stage1/dietlibc/lib/stat_convert.c, mdk-stage1/dietlibc/lib/send.c,
	mdk-stage1/dietlibc/lib/isxdigit.c, mdk-stage1/dietlibc/alpha/waitpid.S,
	mdk-stage1/dietlibc/lib/atexit.c, mdk-stage1/dietlibc/lib/readdir.c,
	mdk-stage1/dietlibc/include/sys/sem.h,
	mdk-stage1/dietlibc/syscalls.s/query_module.S,
	mdk-stage1/dietlibc/lib/strchr.c,
	mdk-stage1/dietlibc/syscalls.s/dietfstat64.S,
	mdk-stage1/dietlibc/syscalls.s/lstat64.S,
	mdk-stage1/dietlibc/i386/setjmp.S, mdk-stage1/dietlibc/lib/alloc.c,
	mdk-stage1/dietlibc/lib/perror.c,
	mdk-stage1/dietlibc/include/sys/socket.h,
	mdk-stage1/dietlibc/lib/creat64.c, mdk-stage1/dietlibc/lib/closedir.c,
	mdk-stage1/dietlibc/sparc/pipe.S, mdk-stage1/dietlibc/lib/msgrcv.c,
	mdk-stage1/dietlibc/include/utmp.h,
	mdk-stage1/dietlibc/syscalls.s/sendfile.S,
	mdk-stage1/dietlibc/syscalls.s/nice.S,
	mdk-stage1/dietlibc/syscalls.s/sigprocmask.S,
	mdk-stage1/dietlibc/syscalls.s/select.S,
	mdk-stage1/dietlibc/include/sys/mtio.h,
	mdk-stage1/dietlibc/i386/strchr.S, mdk-stage1/dietlibc/alpha/divl.S,
	mdk-stage1/dietlibc/syscalls.s/sched_rr_get_interval.S,
	mdk-stage1/dietlibc/lib/__telldir.c,
	mdk-stage1/dietlibc/i386/__testandset.S,
	mdk-stage1/dietlibc/lib/remove.c,
	mdk-stage1/dietlibc/syscalls.s/sched_get_priority_min.S,
	mdk-stage1/dietlibc/lib/fputc.c, mdk-stage1/dietlibc/lib/msgctl.c,
	mdk-stage1/dietlibc/alpha/clone.S, mdk-stage1/dietlibc/lib/connect.c,
	mdk-stage1/dietlibc/include/sys/un.h,
	mdk-stage1/dietlibc/alpha/connect.S,
	mdk-stage1/dietlibc/include/termios.h,
	mdk-stage1/dietlibc/lib/sigfillset.c,
	mdk-stage1/dietlibc/lib/sigismember.c,
	mdk-stage1/dietlibc/syscalls.s/dietstat64.S,
	mdk-stage1/dietlibc/i386/start.S, mdk-stage1/dietlibc/lib/shmget.c,
	mdk-stage1/dietlibc/lib/strtok.c, mdk-stage1/dietlibc/lib/fclose.c,
	mdk-stage1/dietlibc/lib/tcsetpgrp.c,
	mdk-stage1/dietlibc/sparc/Makefile.add,
	mdk-stage1/dietlibc/include/sys/shm.h, mdk-stage1/dietlibc/alpha/send.S,
	mdk-stage1/dietlibc/i386/__longjmp.S, mdk-stage1/dietlibc/lib/recvmsg.c,
	mdk-stage1/dietlibc/include/inttypes.h,
	mdk-stage1/dietlibc/syscalls.s/sched_getscheduler.S,
	mdk-stage1/dietlibc/lib/semget.c, mdk-stage1/dietlibc/lib/open64.c,
	mdk-stage1/dietlibc/alpha/recvmsg.S,
	mdk-stage1/dietlibc/syscalls.s/fork.S,
	mdk-stage1/dietlibc/lib/strcasecmp.c, mdk-stage1/dietlibc/lib/htonl.c,
	mdk-stage1/dietlibc/lib/accept.c, mdk-stage1/dietlibc/alpha/shmat.S,
	mdk-stage1/dietlibc/include/features.h,
	mdk-stage1/dietlibc/include/syslog.h, mdk-stage1/dietlibc/lib/isascii.c,
	mdk-stage1/dietlibc/syscalls.s/writev.S,
	mdk-stage1/dietlibc/lib/fputs.c,
	mdk-stage1/dietlibc/alpha/sigprocmask.S,
	mdk-stage1/dietlibc/lib/ntohs.c, mdk-stage1/dietlibc/include/sys/uio.h,
	mdk-stage1/dietlibc/syscalls.s/nanosleep.S,
	mdk-stage1/dietlibc/syscalls.s/creat.S,
	mdk-stage1/dietlibc/include/sys/sysinfo.h,
	mdk-stage1/dietlibc/lib/atof.c, mdk-stage1/dietlibc/alpha/msgsnd.S,
	mdk-stage1/dietlibc/lib/vsprintf.c, mdk-stage1/dietlibc/lib/toupper.c,
	mdk-stage1/dietlibc/lib/strlcpy.3, mdk-stage1/dietlibc/lib/sigaddset.c,
	mdk-stage1/dietlibc/i386/select.S, mdk-stage1/dietlibc/i386/unified.S,
	mdk-stage1/dietlibc/include/dirent.h,
	mdk-stage1/dietlibc/include/getopt.h, mdk-stage1/dietlibc/lib/seekdir.c,
	mdk-stage1/dietlibc/include/net/route.h,
	mdk-stage1/dietlibc/syscalls.s/exit.S,
	mdk-stage1/dietlibc/include/pthread.h,
	mdk-stage1/dietlibc/lib/sprintf.c, mdk-stage1/dietlibc/alpha/msgget.S,
	mdk-stage1/dietlibc/include/limits.h, mdk-stage1/dietlibc/lib/qsort.c,
	mdk-stage1/dietlibc/lib/execvp.c,
	mdk-stage1/dietlibc/syscalls.s/__reboot.S,
	mdk-stage1/dietlibc/lib/stdin.c,
	mdk-stage1/dietlibc/syscalls.s/getitimer.S,
	mdk-stage1/dietlibc/include/grp.h, mdk-stage1/dietlibc/lib/usleep.c,
	mdk-stage1/dietlibc/lib/lstat.c, mdk-stage1/dietlibc/sparc/setjmp.S,
	mdk-stage1/dietlibc/sparc/fork.S,
	mdk-stage1/dietlibc/syscalls.s/__pread.S,
	mdk-stage1/dietlibc/include/sys/poll.h,
	mdk-stage1/dietlibc/syscalls.s/personality.S,
	mdk-stage1/dietlibc/lib/lseek64.c, mdk-stage1/dietlibc/include/setjmp.h,
	mdk-stage1/dietlibc/lib/recv.c, mdk-stage1/dietlibc/include/string.h,
	mdk-stage1/dietlibc/include/sys/time.h, mdk-stage1/dietlibc/lib/fstat.c,
	mdk-stage1/dietlibc/lib/memcmp.c, mdk-stage1/dietlibc/lib/isupper.c,
	mdk-stage1/dietlibc/include/sys/param.h,
	mdk-stage1/dietlibc/syscalls.s/__getpagesize.S,
	mdk-stage1/dietlibc/lib/exec_lib.c, mdk-stage1/dietlibc/alpha/shmdt.S,
	mdk-stage1/dietlibc/include/dlfcn.h, mdk-stage1/dietlibc/lib/isdigit.c,
	mdk-stage1/dietlibc/lib/fdopen.c, mdk-stage1/dietlibc/lib/exec_lib.h,
	mdk-stage1/dietlibc/lib/__lxstat.c, mdk-stage1/dietlibc/alpha/remq.S,
	mdk-stage1/dietlibc/include/sys/kd.h,
	mdk-stage1/dietlibc/syscalls.s/read.S, mdk-stage1/dietlibc/lib/fopen.c,
	mdk-stage1/dietlibc/syscalls.s/sched_yield.S,
	mdk-stage1/dietlibc/include/sys/mman.h,
	mdk-stage1/dietlibc/lib/__readdir.c,
	mdk-stage1/dietlibc/lib/cfgetospeed.c,
	mdk-stage1/dietlibc/lib/__dtostr.c, mdk-stage1/dietlibc/lib/execv.c,
	mdk-stage1/dietlibc/alpha/reml.S,
	mdk-stage1/dietlibc/syscalls.s/fcntl.S,
	mdk-stage1/dietlibc/include/errno.h, mdk-stage1/dietlibc/lib/ferror.c,
	mdk-stage1/dietlibc/syscalls.s/ipc.S,
	mdk-stage1/dietlibc/syscalls.s/mlockall.S,
	mdk-stage1/dietlibc/lib/fgetc.c, mdk-stage1/dietlibc/lib/strtoull.c,
	mdk-stage1/dietlibc/include/sys/msg.h,
	mdk-stage1/dietlibc/syscalls.s/sigsuspend.S,
	mdk-stage1/dietlibc/lib/isgraph.c, mdk-stage1/dietlibc/lib/vsscanf.c,
	mdk-stage1/dietlibc/lib/ftell.c, mdk-stage1/dietlibc/include/unistd.h,
	mdk-stage1/dietlibc/lib/msgsnd.c, mdk-stage1/dietlibc/lib/semop.c,
	mdk-stage1/dietlibc/include/net/if_arp.h,
	mdk-stage1/dietlibc/lib/execlp.c,
	mdk-stage1/dietlibc/syscalls.s/stat64.S,
	mdk-stage1/dietlibc/dietfeatures.h, mdk-stage1/dietlibc/dietstdio.h,
	mdk-stage1/dietlibc/lib/feof.c, mdk-stage1/dietlibc/lib/opendir.c,
	mdk-stage1/dietlibc/syscalls.s/fstat64.S,
	mdk-stage1/dietlibc/syscalls.s/sched_setparam.S,
	mdk-stage1/dietlibc/include/sys/reboot.h,
	mdk-stage1/dietlibc/lib/sigdelset.c, mdk-stage1/dietlibc/lib/execl.c,
	mdk-stage1/dietlibc/include/sys/sendfile.h,
	mdk-stage1/dietlibc/include/sys/syslog.h,
	mdk-stage1/dietlibc/syscalls.s/iopl.S, mdk-stage1/dietlibc/lib/msgget.c,
	mdk-stage1/dietlibc/syscalls.s/sched_getparam.S,
	mdk-stage1/dietlibc/lib/vsnprintf.c,
	mdk-stage1/dietlibc/include/signal.h,
	mdk-stage1/dietlibc/syscalls.s/pause.S,
	mdk-stage1/dietlibc/include/arpa/inet.h,
	mdk-stage1/dietlibc/include/sys/wait.h,
	mdk-stage1/dietlibc/alpha/time.S, mdk-stage1/dietlibc/lib/ttyname.c,
	mdk-stage1/dietlibc/lib/__lstat64.c, mdk-stage1/dietlibc/lib/__stat64.c,
	mdk-stage1/dietlibc/alpha/recv.S, mdk-stage1/dietlibc/lib/fgets.c,
	mdk-stage1/dietlibc/lib/strncat.c, mdk-stage1/dietlibc/lib/__lltostr.c,
	mdk-stage1/dietlibc/lib/__ltostr.c,
	mdk-stage1/dietlibc/sparc/__longjmp.S, mdk-stage1/dietlibc/lib/puts.c,
	mdk-stage1/dietlibc/lib/rand.c, mdk-stage1/dietlibc/syscalls.s/fsync.S,
	mdk-stage1/dietlibc/include/fnmatch.h, mdk-stage1/dietlibc/lib/fflush.c,
	mdk-stage1/dietlibc/lib/htons.c,
	mdk-stage1/dietlibc/syscalls.s/sigaltstack.S,
	mdk-stage1/dietlibc/include/sys/resource.h,
	mdk-stage1/dietlibc/lib/__stat64_cvt.c,
	mdk-stage1/dietlibc/lib/localtime.c,
	mdk-stage1/dietlibc/alpha/seteuid.c,
	mdk-stage1/dietlibc/syscalls.s/stime.S,
	mdk-stage1/dietlibc/include/resolv.h, mdk-stage1/dietlibc/lib/__xstat.c,
	mdk-stage1/dietlibc/ppc/Makefile.add,
	mdk-stage1/dietlibc/sparc/unified.S, mdk-stage1/dietlibc/lib/bsearch.c,
	mdk-stage1/dietlibc/include/net/if.h,
	mdk-stage1/dietlibc/include/shadow.h,
	mdk-stage1/dietlibc/lib/__rewinddir.c,
	mdk-stage1/dietlibc/include/daemon.h, mdk-stage1/dietlibc/lib/mkfifo.c,
	mdk-stage1/dietlibc/include/paths.h, mdk-stage1/dietlibc/include/pwd.h,
	mdk-stage1/dietlibc/lib/strrchr.c, mdk-stage1/dietlibc/lib/__seekdir.c,
	mdk-stage1/dietlibc/syscalls.h, mdk-stage1/dietlibc/alpha/shmctl.S,
	mdk-stage1/dietlibc/lib/fdglue.c, mdk-stage1/dietlibc/lib/fseek.c,
	mdk-stage1/dietlibc/include/regex.h,
	mdk-stage1/dietlibc/include/sys/ptrace.h,
	mdk-stage1/dietlibc/lib/tcdrain.c,
	mdk-stage1/dietlibc/syscalls.s/lstat.S,
	mdk-stage1/dietlibc/alpha/semctl.S, mdk-stage1/dietlibc/lib/recvfrom.c,
	mdk-stage1/dietlibc/lib/random.c,
	mdk-stage1/dietlibc/syscalls.s/times.S,
	mdk-stage1/dietlibc/lib/getpgrp.c, mdk-stage1/dietlibc/lib/cfmakeraw.c,
	mdk-stage1/dietlibc/lib/stat.c, mdk-stage1/dietlibc/syscalls.s/write.S,
	mdk-stage1/dietlibc/syscalls.s/dietlstat64.S,
	mdk-stage1/dietlibc/ppc/__testandset.S,
	mdk-stage1/dietlibc/include/mntent.h,
	mdk-stage1/dietlibc/include/sys/file.h,
	mdk-stage1/dietlibc/syscalls.s/fstat.S,
	mdk-stage1/dietlibc/syscalls.s/llseek.S,
	mdk-stage1/dietlibc/lib/strsep.c,
	mdk-stage1/dietlibc/include/sys/stat.h,
	mdk-stage1/dietlibc/syscalls.s/munlockall.S,
	mdk-stage1/dietlibc/syscalls.s/setpriority.S,
	mdk-stage1/dietlibc/include/assert.h,
	mdk-stage1/dietlibc/include/strings.h,
	mdk-stage1/dietlibc/include/alloca.h, mdk-stage1/dietlibc/lib/gmtime.c,
	mdk-stage1/dietlibc/lib/shmat.c, mdk-stage1/dietlibc/lib/__isnan.c,
	mdk-stage1/dietlibc/ppc/__longjmp.S,
	mdk-stage1/dietlibc/lib/__closedir.c,
	mdk-stage1/dietlibc/include/sys/signal.h,
	mdk-stage1/dietlibc/lib/rewinddir.c, mdk-stage1/dietlibc/lib/stdout.c,
	mdk-stage1/dietlibc/lib/vfprintf.c, mdk-stage1/dietlibc/.cvsignore,
	mdk-stage1/dietlibc/lib/telldir.c, mdk-stage1/dietlibc/include/glob.h,
	mdk-stage1/dietlibc/lib/tm_conv.c,
	mdk-stage1/dietlibc/syscalls.s/reboot.S,
	mdk-stage1/dietlibc/syscalls.s/sched_setscheduler.S,
	mdk-stage1/dietlibc/syscalls.s/umount2.S,
	mdk-stage1/dietlibc/syscalls.s/readv.S,
	mdk-stage1/dietlibc/lib/__fxstat.c,
	mdk-stage1/dietlibc/include/sys/select.h,
	mdk-stage1/dietlibc/syscalls.s/syslog.S,
	mdk-stage1/dietlibc/syscalls.s/sysinfo.S,
	mdk-stage1/dietlibc/lib/fprintf.c,
	mdk-stage1/dietlibc/include/sys/cdefs.h, mdk-stage1/dietlibc/README,
	mdk-stage1/dietlibc/lib/fread.c, mdk-stage1/dietlibc/lib/getpwnam.c,
	mdk-stage1/dietlibc/syscalls.s/getcwd.S,
	mdk-stage1/dietlibc/lib/getservent.c, mdk-stage1/dietlibc/lib/tolower.c,
	mdk-stage1/dietlibc/diet.c, mdk-stage1/dietlibc/alpha/recvfrom.S,
	mdk-stage1/dietlibc/include/elf.h, mdk-stage1/dietlibc/alpha/sendto.S,
	mdk-stage1/dietlibc/lib/fileno.c, mdk-stage1/dietlibc/i386/clone.S,
	mdk-stage1/dietlibc/lib/__opendir.c,
	mdk-stage1/dietlibc/include/sched.h, mdk-stage1/dietlibc/alpha/__time.c,
	mdk-stage1/dietlibc/lib/ispunct.c, mdk-stage1/dietlibc/lib/printf.c,
	mdk-stage1/dietlibc/lib/strtod.c, mdk-stage1/dietlibc/lib/strncasecmp.c,
	mdk-stage1/dietlibc/lib/__getcwd.c,
	mdk-stage1/dietlibc/include/netinet/in.h,
	mdk-stage1/dietlibc/lib/shmctl.c,
	mdk-stage1/dietlibc/syscalls.s/dietlstat.S,
	mdk-stage1/dietlibc/include/arpa/nameser.h,
	mdk-stage1/dietlibc/lib/assert_fail.c, mdk-stage1/dietlibc/lib/semctl.c,
	mdk-stage1/dietlibc/lib/shmdt.c, mdk-stage1/dietlibc/lib/shutdown.c,
	mdk-stage1/dietlibc/lib/setpgrp.c, mdk-stage1/dietlibc/alpha/msgrcv.S,
	mdk-stage1/dietlibc/lib/stderr.c,
	mdk-stage1/dietlibc/syscalls.s/close.S,
	mdk-stage1/dietlibc/syscalls.s/dietfstat.S,
	mdk-stage1/dietlibc/include/locale.h,
	mdk-stage1/dietlibc/syscalls.s/getpriority.S,
	mdk-stage1/dietlibc/lib/__fstat64.c, mdk-stage1/dietlibc/lib/isalpha.c,
	mdk-stage1/dietlibc/lib/reboot.c, mdk-stage1/dietlibc/lib/isspace.c,
	mdk-stage1/dietlibc/include/sys/mount.h,
	mdk-stage1/dietlibc/lib/creat.c, mdk-stage1/dietlibc/syscalls.s/lseek.S,
	mdk-stage1/dietlibc/sparc/clone.S, mdk-stage1/dietlibc/dietwarning.h,
	mdk-stage1/dietlibc/lib/islower.c,
	mdk-stage1/dietlibc/alpha/Makefile.add, mdk-stage1/dietlibc/lib/abort.c,
	mdk-stage1/dietlibc/alpha/msgctl.S, mdk-stage1/dietlibc/lib/isalnum.c,
	mdk-stage1/dietlibc/include/ctype.h,
	mdk-stage1/dietlibc/include/netdb.h,
	mdk-stage1/dietlibc/include/memory.h, mdk-stage1/dietlibc/lib/iscntrl.c,
	mdk-stage1/dietlibc/i386/Makefile.add, mdk-stage1/dietlibc/lib/getopt.c,
	mdk-stage1/dietlibc/syscalls.s/waitpid.S,
	mdk-stage1/dietlibc/lib/strtoul.c,
	mdk-stage1/dietlibc/syscalls.s/stat.S,
	mdk-stage1/dietlibc/syscalls.s/sysctl.S: import new version of dietlibc

	* mdk-stage1/insmod-busybox/busybox.h: fix conflicts with dietlibc headers

	* mdk-stage1/dietlibc/include/stdio.h,
	mdk-stage1/dietlibc/include/stdlib.h,
	mdk-stage1/dietlibc/include/math.h,
	mdk-stage1/dietlibc/include/sys/times.h: have slang and newt compile
	with dietlibc
	import new version of dietlibc

	* mdk-stage1/Makefile.common: new dietlibc binaries location

	* mdk-stage1/newt-frontend.c: i can compile slang and newt with dietlibc
	now

	* mdk-stage1/dietlibc/lib/abs.c: have slang and newt compile with dietlibc

	* mdk-stage1/dhcp.c: Have the wait_message() with the sleep()
	  - add a sleep(2) after ioctl ifupping so that further operation can
	work normally
	  - more logs

2001/05/14  kjx

	* share/po/zh_CN.GB2312.po: process untranslated

2001/05/14  Pixel  <pixel@mandrakesoft.com>

	* fs.pm, fsedit.pm, partition_table.pm, install_any.pm: basic xfs handling

2001/05/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: fixed missing package which may be selected on
	hardware during real install.

	* rescue/tree/etc/oem: added support to change boot entries when invoking
	oem script.
	fixed missing SCSI support and driver module loading.
	fixed missing speficic packages not installed on HW detected.

2001/05/08  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: VBox -> HBox in Embedded mode

	* standalone/mousedrake: code cleaned and debugged
	added mouse test. Ugly

2001/05/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stdio-frontend.c: fix minor stuff
	re-include correct layout for [] choices, in a smaller way than before

	* mdk-stage1/tools.c: minor fix
	needs to poll() for available data before loading ramdisk because ftp
	transfers would fail in some situations

	* mdk-stage1/init.c: new maxim

	* mdk-stage1/config-stage1.h: adjust COMPRESSION_RATIO so that last star
	is printed when last blocks of file are read

	* mdk-stage1/dhcp.c: use poll() rather than select() to win some bytesCVS:
	----------------------------------------------------------------------

2001/05/08  siegel

	* share/po/de.po: fixed plenty ugly typos

2001/05/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po: updated Brazilian file

2001/05/07  yduret

	* docs/README.devel: fix one typo

	* any.pm, bootloader.pm: updated install_lilo() according to new lilo
	package
	(/boot/lilo-{menu,graphic,text})

2001/05/06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad output and bad adsl script

2001/05/06  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install2.pm: workaround for msec hang on PPC

2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts

2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt

2001/05/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: KDE+SOUND -> 4 xmms-arts

2001/05/04  Stew Benedict  <sbenedict@mandrakesoft.com>

	* c/smp.c, keyboard.pm, Xconfigurator.pm: force XF4 in expert too for PPC,
	don't run xmodmap, PPC SMP routine placeholder

2001/05/04  Thierry Vignaud  <tvignaud@mandrakesoft.com>

	* mdk-stage1/mar/mar-extract-only.c: text size micro-opt

2001/04/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stdio-frontend.c: nicer layout for progressbar and
	statusreport, when update_progression
	Provide some description of the drivers

	* docs/HACKING: fix
	pserver -> ext

	* mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/tools.h,
	mdk-stage1/newt-frontend.c, mdk-stage1/modules_descr.h,
	mdk-stage1/modules.c: Provide some description of the drivers

2001/04/30  Pixel  <pixel@mandrakesoft.com>

	* docs/README: s/gi.tar.bz2/DrakX-*.src.rpm/

	* docs/advocacy: fuck'em all

2001/04/26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* docs/README.devel, docs/README: added some more comments for DrakX code
	source and usage.

2001/04/25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/oem-prepare: fixed use of VERSION file to find language.
	prepare a oem disk to be used by moving all files that will not be
	installed by oem (oem-master disk preparation).

	* rescue/tree/etc/closurepkgs, rescue/tree/etc/part_and_bootloader: fixed
	usage of free space on disk, added NVIDIA packages to install.

	* rescue/tree/etc/oem-server: added missing VERSION file.
	fixed usage of free space on disk, added NVIDIA packages to install.

	* rescue/tree/etc/oem: added missing autologin package.
	added option to enable oem mode.
	added missing VERSION file.
	fixed usage of free space on disk, added NVIDIA packages to install.

2001/04/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: version is labelled "cooker"

2001/04/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* tools/serial_probe/serial.c, tools/serial_probe/serial_probe.c:
	integrate fg's fixes for includes

2001/04/19  Stew Benedict  <sbenedict@mandrakesoft.com>

	* rescue/list.sparc, rescue/list.i386, rescue/list.ppc, rescue/list.alpha,
	rescue/list: move /sbin/sfdisk to list.arch, update both list.ppc

2001/04/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: fix bug that trashes the network config of stage1
	during stage2, when no DNS is provided

2001/04/18  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: last corrections

	* standalone/draknet, netconnect.pm: last corrections
	corrected internet connection test, and parameters editing

	* install_steps_gtk.pm: corrected cursor on details

2001/04/18  Frederic Lepied  <flepied@mandrakesoft.com>

	* share/rpmsrate: * put am-utils and autofs in NETWORKING_FILE
	* drakprofile in level 1
	* swapped tkinter and python-devel
	* vnc-server in NETWORKING_REMOTE_ACCESS_SERVER
	* vnc-SVGALIB in level 2

2001/04/17  dam's  <damien@mandrakesoft.com>

	* standalone/mousedrake: fixed embedded

	* bootlook.pm: chmoded autologin

2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: restored grub as everything seems fine.

	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
	swap gap.
	make sure kernel will be selected.

	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
	make sure kernel is selected.

	* install_steps_interactive.pm: fixed missing mouse update in summary.

2001/04/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: fix 75dpi-fonts bug with MAKEDEV

2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* standalone/draknet: fixed typo

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: Updated Basque file

2001/04/17  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): better ensure
	'broadcast' insteaf of overriding
	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
	means no NIS

	* any.pm (setupBootloader): remove a warning

2001/04/17  warly

	* share/rpmsrate: put MAKEDEV at end of line

2001/04/17  dam's  <damien@mandrakesoft.com>

	* standalone/mousedrake: fixed embedded

	* bootlook.pm: chmoded autologin

2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: restored grub as everything seems fine.

	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
	make sure kernel is selected.
	fixed parted problem.

	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
	swap gap.
	make sure kernel will be selected.

	* install_steps_interactive.pm: fixed missing mouse update in summary.

2001/04/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: Updated Basque file

2001/04/17  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): better ensure
	'broadcast' insteaf of overriding
	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
	means no NIS

	* any.pm (setupBootloader): remove a warning

2001/04/17  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: chmoded autologin

2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
	make sure kernel is selected.
	fixed parted problem.

	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
	swap gap.
	make sure kernel will be selected.

2001/04/17  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): better ensure
	'broadcast' insteaf of overriding
	(setRootPassword): set NIS to broadcast when NIS asked. Empty NIS still
	means no NIS

	* any.pm (setupBootloader): remove a warning

2001/04/17  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: chmoded autologin

2001/04/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed swap size instead of inst size for swap gap.
	make sure kernel is selected.
	fixed parted problem.

	* rescue/tree/etc/oem-server: fixed swap size instead of inst size for
	swap gap.
	make sure kernel will be selected.

2001/04/17  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): set NIS to broadcast
	when NIS asked. Empty NIS still means no NIS

	* any.pm (setupBootloader): remove a warning

2001/04/16  dam's  <damien@mandrakesoft.com>

	* any.pm: removed Grub if Embedded

2001/04/16  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: minor bug.

	* any.pm: removed Grub if Embedded

2001/04/16  dam's  <damien@mandrakesoft.com>

	* standalone/net_monitor: updated
	updated

	* network.pm: dhcpd -> dhcpcd

	* Xconfigurator.pm: added nice monitor.png

	* netconnect.pm: minor bug.
	dhcpd -> dhcpcd

	* standalone/draknet: updated

	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
	removed for readd in kb

	* my_gtk.pm: corrected typo
	added grey fix for contreol-center

2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: added missing rio500 in closure.
	finally fixed menu by generating /etc/rpm/macros file.
	added missing LF.
	now fixed menu problems.
	try another fix for RPM_INSTALL_LANG as first fr_FR:fr instead of
	fr:fr_FR.
	really disable server.
	maybe fixed RPM_INSTALL_LANG (from "fr" to "fr:fr_FR" for french).
	fixed to avoid nasty message in wrong places.
	moved warning message around.
	fixed wrong LOCALES"...".
	fixed lang weirdness, fixed minimal size of / partition to be more
	confortable,
	fixed default language for starting DrakX after.

	* Xconfig.pm: fixed standalone error for wacom weirdness.
	fixed HASH() in /etc/X11/XF86Config*.

	* fs.pm: restored not neccessary to load reiserfs for formating.
	loading reiserfs module before formatting.

2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
	XFdrake

	* mdk-stage1/TECH-INFOS: update doc

	* share/po/fr.po: fix minor thing

2001/04/16  Pixel  <pixel@mandrakesoft.com>

	* share/compssUsers: remove BURNER from Utilities

2001/04/16  warly

	* share/rpmsrate: lower portsentry

2001/04/16  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: added nice monitor.png

	* standalone/net_monitor: updated

	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
	removed for readd in kb

	* my_gtk.pm: corrected typo
	added grey fix for contreol-center

2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfig.pm: fixed standalone error for wacom weirdness.
	fixed HASH() in /etc/X11/XF86Config*.

	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
	"fr:fr_FR" for french).
	fixed to avoid nasty message in wrong places.
	moved warning message around.
	fixed wrong LOCALES"...".
	fixed lang weirdness, fixed minimal size of / partition to be more
	confortable,
	fixed default language for starting DrakX after.

2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
	XFdrake

2001/04/16  Pixel  <pixel@mandrakesoft.com>

	* share/compssUsers: remove BURNER from Utilities

2001/04/16  warly

	* share/rpmsrate: lower portsentry

2001/04/16  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: bugfix
	added update thread
	corrected bad install package.
	updated expert mode

	* network.pm, install_steps.pm: corrected bad install package.

	* Xconfigurator.pm: added nice monitor.png

	* tinyfirewall.pm: corrected package installation

	* standalone/net_monitor: updated

	* pixmaps/hori.png, pixmaps/colors.png, pixmaps/wiz_default_left.png,
	pixmaps/tradi.png, pixmaps/categ.png, pixmaps/wiz_default_up.png,
	pixmaps/verti.png, pixmaps/wiz_firewall.png, pixmaps/monitor.png,
	pixmaps/monitor-1280.png, pixmaps/monitor-1024.png, pixmaps/net_c.png,
	pixmaps/wiz_draknet.png, pixmaps/gmon.png, pixmaps/monitor-800.png,
	pixmaps/net_d.png, pixmaps/eth_card_mini.png, pixmaps/wiz_drakgw.png,
	pixmaps/monitor-640.png, pixmaps/colors8.png, pixmaps/colors16.png: plop
	removed for readd in kb

	* my_gtk.pm: corrected typo
	added grey fix for contreol-center

	* netconnect.pm: debug
	corrected bad install package.

2001/04/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfig.pm: fixed standalone error for wacom weirdness.
	fixed HASH() in /etc/X11/XF86Config*.

	* rescue/tree/etc/oem: maybe fixed RPM_INSTALL_LANG (from "fr" to
	"fr:fr_FR" for french).
	fixed to avoid nasty message in wrong places.
	moved warning message around.
	fixed wrong LOCALES"...".
	fixed lang weirdness, fixed minimal size of / partition to be more
	confortable,
	fixed default language for starting DrakX after.

2001/04/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* pixmaps/monitor-800.png, pixmaps/monitor-1024.png,
	pixmaps/monitor-640.png, pixmaps/monitor-1280.png: add nice shots for
	XFdrake

2001/04/16  Pixel  <pixel@mandrakesoft.com>

	* share/compssUsers: remove BURNER from Utilities

	* install_any.pm (g_auto_install): do not take 'mkbootdisk'

2001/04/16  warly

	* share/rpmsrate: lower portsentry

2001/04/15  fabman

	* share/po/es.po: updates

2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fix minor typo

2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/gl.po: updated Galician file

2001/04/15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
	Workstation, Server) to make gg happy

2001/04/15  fabman

	* share/po/es.po: updates

2001/04/15  fcrozat

	* share/rpmsrate: Add mozilla-mail and mozilla-irc to correct categories

2001/04/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fix minor typo

2001/04/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po, share/po/ko.po: Updated Swedish and Korean files

2001/04/15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (reallyChooseGroups): translate path (eg:
	Workstation, Server) to make gg happy

	* printerdrake.pm (main): restore the "Ok" button for the queues
	manipulation

	* any.pm (write_passwd_user): fix use of local

	* interactive.pm (ask_from_entries_refH_powered_normalize): add an eval
	around "require log" to keep perl from going totally mad (getting things
	like v18.843.482 required--this is only v5.6.0)

2001/04/15  yduret

	* bootlook.pm: bug fix: if cancel pressed in lilo/grub choice => return to
	mcc normally
	fix layout & size

2001/04/14  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected isdn detect display

	* standalone/net_monitor, standalone/draknet: wait 10 sec, instead of 7

2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
	selection of packages.

	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.

2001/04/14  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (naughtyServers): add apache

	* install_gtk.pm (createXconf): ensure the mouse device is created (mainly
	for auto_inst)

	* install_steps_interactive.pm (exitInstall): fix bad i18n of Replay
	button (thx2submarine)

2001/04/14  warly

	* share/rpmsrate: lower viavoicemenu to 1 to avoid error message for
	powerpack boxes without ViaVoice

2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: changed priority level from 2 to 4 for rate
	selection of packages.

	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.

2001/04/14  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
	test)

	* Xconfigurator.pm (use vars): fix stew sux
	(testFinalConfig): nicer stderr handling

	* interactive_gtk.pm, interactive_newt.pm (exit): fix the exit code

2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed to gzip synthesis file.
	safe guard generation of synthesis file.
	fixed umask on urpmi list file and generate synthesis file for each
	hdlist.

	* pkgs.pm: fixed absurd mismatch of use of <=> and cmp on versionCompare.

2001/04/14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
	/mnt/etc/gtk) instead of /etc/gtkrc

	* any.pm (autologin): spurious messages of chksession  -> dave nul

	* interactive_newt.pm (exit): fix the exit code
	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
	them exist...)
	(waitbox): remove spurious '0' in wait_messages

	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
	test)

	* Xconfigurator.pm (use vars): fix stew sux
	(testFinalConfig): nicer stderr handling

	* interactive_gtk.pm (exit): fix the exit code

2001/04/14  warly

	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
	and list

2001/04/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed to gzip synthesis file.
	safe guard generation of synthesis file.
	fixed umask on urpmi list file and generate synthesis file for each
	hdlist.

2001/04/14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (configureX): fix link /etc/gtk (to
	/mnt/etc/gtk) instead of /etc/gtkrc

	* any.pm (autologin): spurious messages of chksession  -> dave nul

	* interactive_newt.pm (exit): fix the exit code
	(wait_message_endW): don't log "none stacked wait-messages" (as a lot of
	them exist...)
	(waitbox): remove spurious '0' in wait_messages

	* lang.pm (load_po): s/!isStandalone/isInstall/ (mainly for XFdrake's
	test)

	* Xconfigurator.pm (use vars): fix stew sux
	(testFinalConfig): nicer stderr handling

	* interactive_gtk.pm (exit): fix the exit code

2001/04/14  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm: updates to X, mouse
	setup for PPC

2001/04/14  warly

	* share/compssUsers, share/list, share/rpmsrate: add icons in compssUser
	and list

2001/04/13  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* Xconfigurator.pm: corrected
	updated
	updated message

	* standalone/draknet: message corrected

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
	opened).

2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: Updated Norwegian file
	Updated po files

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/vi.po, share/po/br.po,
	share/po/gl.po, share/po/ca.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: Updated po files

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (main): reverse message

	* install_steps_gtk.pm (installPackages): hide Details button sooner
	(installPackages): do not show button "Details" when no advertising

	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
	ru(winkeys), it is redondant

	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250

	* any.pm (ask_users): do not have an empty icon. better not ask for icon
	if no icon

2001/04/13  siegel

	* share/po/de.po: updates

2001/04/13  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* Xconfigurator.pm: corrected
	updated
	updated message

	* standalone/draknet: message corrected

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: avoid locking cdrom for oem (compssUsers file still
	opened).

	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
	available.
	fixed very old typo not encountered before;

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (main): reverse message

	* install_steps_gtk.pm (installPackages): hide Details button sooner
	(installPackages): do not show button "Details" when no advertising

	* Xconfigurator_consts.pm: do not set XkbVariant "winkeys" for
	ru(winkeys), it is redondant

	* interactive_gtk.pm (ask_from_entries_refW): set_default_size width 250

	* any.pm (ask_users): do not have an empty icon. better not ask for icon
	if no icon

2001/04/13  warly

	* share/compssUsers: add ssh server in Network Computer Server

2001/04/13  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* Xconfigurator.pm: corrected
	updated
	updated message

	* standalone/draknet: message corrected

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
	available.
	fixed very old typo not encountered before;

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* common.pm (backtrace): created

	* install_steps_interactive.pm (addUser): remove the setting of
	$o->{autologin}, now done in any::autologin

	* install_steps_gtk.pm (installPackages): hide Details button sooner
	(installPackages): do not show button "Details" when no advertising

	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
	/etc/sysconfig/usb as asked by Lord Chmou

	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
	list instead of dying (for 8.0 only, should be switched back to die)
	(ask_from_listf): display the backtrace when empty list

	* any.pm (ask_users): add the empty icon
	(autologin): fix

2001/04/13  warly

	* share/compssUsers: add ssh server in Network Computer Server

2001/04/13  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: updated
	updated message

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* standalone/draknet: message corrected

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
	available.
	fixed very old typo not encountered before;

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* common.pm (backtrace): created

	* install_steps_interactive.pm (addUser): remove the setting of
	$o->{autologin}, now done in any::autologin

	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
	/etc/sysconfig/usb as asked by Lord Chmou

	* install_steps_gtk.pm (installPackages): do not show button "Details"
	when no advertising

	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
	list instead of dying (for 8.0 only, should be switched back to die)
	(ask_from_listf): display the backtrace when empty list

	* any.pm (ask_users): add the empty icon
	(autologin): fix

2001/04/13  warly

	* share/compssUsers: add ssh server in Network Computer Server

2001/04/13  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: updated
	updated message

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* standalone/draknet: message corrected

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
	available.
	fixed very old typo not encountered before;

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* common.pm (backtrace): created

	* install_steps_interactive.pm (addUser): remove the setting of
	$o->{autologin}, now done in any::autologin

	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
	/etc/sysconfig/usb as asked by Lord Chmou

	* install_steps_gtk.pm (installPackages): do not show button "Details"
	when no advertising

	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
	list instead of dying (for 8.0 only, should be switched back to die)
	(ask_from_listf): display the backtrace when empty list

	* any.pm (ask_users): add the empty icon
	(autologin): fix

2001/04/13  warly

	* share/compssUsers: add ssh server in Network Computer Server

2001/04/13  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: updated
	updated message

	* standalone/draknet: message corrected
	updated

	* netconnect.pm: net_cnx_up/down xritten in neuneu

	* bootlook.pm: embedded = 0 -> local

2001/04/13  fabman

	* share/po/es.po: synchro with EN

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: avoid illegal modulus zero if no advertizing is
	available.
	fixed very old typo not encountered before;

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* common.pm (backtrace): created

	* install_steps_interactive.pm (addUser): remove the setting of
	$o->{autologin}, now done in any::autologin

	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
	/etc/sysconfig/usb as asked by Lord Chmou

	* install_steps_gtk.pm (installPackages): do not show button "Details"
	when no advertising

	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
	list instead of dying (for 8.0 only, should be switched back to die)
	(ask_from_listf): display the backtrace when empty list

	* any.pm (ask_users): add the empty icon
	(autologin): fix

2001/04/13  warly

	* share/compssUsers: add ssh server in Network Computer Server
	add DATABASES to Database
	add icons for server

2001/04/13  dam's  <damien@mandrakesoft.com>

	* network.pm: updated wireless configuration

	* netconnect.pm: corrected loop in isdn + other things

	* bootlook.pm: embedded = 0 -> local

	* standalone/draknet: updated
	added delete event

2001/04/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* netconnect.pm: fixed syntax error :-)

	* install_steps.pm, install_steps_gtk.pm: added conditional update-menus
	if package are installed.

	* install_steps_interactive.pm: added conditional update-menus if package
	are installed.
	make sure update-menus is called after installing cups related packages.

2001/04/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/fr.po, share/po/sv.po, share/po/hu.po: Updated
	Croatian and Swedish files

	* share/po/sl.po, share/po/cy.po, share/po/ca.po, share/po/ga.po,
	share/po/is.po, share/po/cs.po: Removed po files with too low leve lof
	translating ( < 60% )
	so they are not included on final CD

2001/04/13  Pixel  <pixel@mandrakesoft.com>

	* common.pm (backtrace): created

	* install_steps_interactive.pm (addUser): remove the setting of
	$o->{autologin}, now done in any::autologin

	* bootlook.pm: don't use Locale::GetText, use DrakX's i18n

	* install2.pm (miscellaneous): add setting KEYBOARD=yes in
	/etc/sysconfig/usb as asked by Lord Chmou

	* interactive.pm (ask_from_entries_refH_powered_normalize): log the empty
	list instead of dying (for 8.0 only, should be switched back to die)
	(ask_from_listf): display the backtrace when empty list

	* my_gtk.pm (new): make dams happy

	* any.pm (ask_users): add the empty icon
	(autologin): fix

2001/04/13  warly

	* share/compssUsers: add DATABASES to Database
	add icons for server

2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c: remove unnecessary redhat history code

2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed wrong kernel version extraction (typically for
	upgrade).

	* install_steps_interactive.pm: removed Cancel of Summary.
	fixed ask printer configuration.

	* detect_devices.pm: fix Hewlett-Packard to HP in case.

	* standalone/printerdrake: never ask to configure a printer in standalone.

	* printerdrake.pm: automatically add a queue if nothing exists.
	fixed ask to configure a printer.

	* interactive.pm: removed strict die on empty list.

	* live_install2: added some gtk and gdk_imlib missing variables.

	* live_install: removed gtk variable for data, moved to second script.

	* modules.pm, commands.pm, lang.pm, pkgs.pm, keyboard.pm: fixed log of
	packdrake.

2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c: remove unneeded #define

	* standalone/drakgw: add some rule so later on tinyfirewall will not
	prevent everything from working

	* share/po/fr.po: minor fix
	write some ppc translations

2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: Updated Italian file

2001/04/12  Pixel  <pixel@mandrakesoft.com>

	* printer.pm: use run_program and remove "require run_program"s

	* my_gtk.pm (main): only accept X (gdk) events key_press, key_release and
	exposure (so
	that not to receive motion_notify which would generate focus_out in
	non-interesting cases)

	* interactive.pm (ask_from_entries_refH_powered_normalize): fix the test
	for empty lists
	(ask_from_entries_refH_powered_normalize):
	  - when not_edit and empty list, die.
	  - when not_edit and single element list, don't display that entry.

	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"

	* modules.pm (configure_pcmcia): better handling for not running cardmgr
	many times
	(configure_pcmcia): always run cardmgr so that it is run even if stage1
	did create a /var/run/stab. This is just a try :-/

2001/04/12  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: if neuneu but explicited clicked, don't skip
	corrected pcmcia driver

2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: removed Cancel of Summary.
	fixed ask printer configuration.

	* common.pm: improved bestMatchSentence2.

	* detect_devices.pm: fix Hewlett-Packard to HP in case.

	* standalone/printerdrake: never ask to configure a printer in standalone.

	* printerdrake.pm: automatically add a queue if nothing exists.
	fixed ask to configure a printer.

	* interactive.pm: removed strict die on empty list.

	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
	packdrake.

2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: add some rule so later on tinyfirewall will not
	prevent everything from working

	* share/po/fr.po: write some ppc translations
	un-dadouize a problem

2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: Updated Italian file

2001/04/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): fix no advertising with less
	than 20MB of packages

	* interactive.pm (ask_from_entries_refH_powered_normalize):
	  - when not_edit and empty list, die.
	  - when not_edit and single element list, don't display that entry.

	* install_steps_interactive.pm (configureX): fix for X test at install
	with exotic fonts

	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"

	* modules.pm (configure_pcmcia): better handling for not running cardmgr
	many times
	(configure_pcmcia): always run cardmgr so that it is run even if stage1
	did create a /var/run/stab. This is just a try :-/

2001/04/12  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: corrected typo
	added use bootloader

	* standalone/net_monitor: typo

	* netconnect.pm: if neuneu but explicited clicked, don't skip
	corrected pcmcia driver
	corrected typo

	* lang.pm: pixel sux

	* network.pm, standalone/draknet: corrected network connection

	* my_gtk.pm: corrected set_modal

2001/04/12  fabman

	* share/po/es.po: updated spanish .po files

2001/04/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: removed Cancel of Summary.
	fixed ask printer configuration.

	* common.pm: improved bestMatchSentence2.

	* detect_devices.pm: fix Hewlett-Packard to HP in case.

	* standalone/printerdrake: never ask to configure a printer in standalone.

	* printerdrake.pm: automatically add a queue if nothing exists.
	fixed ask to configure a printer.

	* modules.pm, commands.pm, lang.pm, keyboard.pm, pkgs.pm: fixed log of
	packdrake.

2001/04/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: un-dadouize a problem
	sync

2001/04/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sp.po, share/po/fi.po, share/po/DrakX.pot,
	share/po/zh_CN.GB2312.po, share/po/es.po, share/po/fr.po,
	share/po/sr.po, share/po/de.po, share/po/el.po, share/po/et.po,
	share/po/sk.po, share/po/eu.po, share/po/sl.po, share/po/vi.po,
	share/po/ko.po, share/po/eo.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/da.po, share/po/is.po, share/po/zh_TW.Big5.po,
	share/po/id.po: Updated Chinese file

	* share/po/it.po: Updated Italian file
	Updated Chinese file

2001/04/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): fix no advertising with less
	than 20MB of packages

	* interactive.pm (ask_from_entries_refH_powered_normalize):
	  - when not_edit and empty list, die.
	  - when not_edit and single element list, don't display that entry.

	* install_steps_interactive.pm (configureX): fix for X test at install
	with exotic fonts

	* lang.pm (pack_langs): set RPM_INSTALL_LANG for package "menu"

	* modules.pm (configure_pcmcia): better handling for not running cardmgr
	many times
	(configure_pcmcia): always run cardmgr so that it is run even if stage1
	did create a /var/run/stab. This is just a try :-/

2001/04/12  siegel

	* share/po/de.po: new german version

2001/04/12  yduret

	* bootlook.pm: added some stuff

2001/04/11  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: no setmodal 0 if wizard

2001/04/12  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: corrected typo
	added use bootloader

	* netconnect.pm: corrected typo

2001/04/12  fabman

	* share/po/es.po: updated spanish .po files

2001/04/12  siegel

	* share/po/de.po: new german version

2001/04/11  dam's  <damien@mandrakesoft.com>

	* share/themes-mdk.rc: tooltips

	* netconnect.pm: updated

	* my_gtk.pm: no setmodal 0 if wizard

2001/04/11  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (reallyChooseGroups): relook

	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
	big

	* share/compssUsers: adapt for new profile choosing layout

2001/04/11  yduret

	* bootlook.pm: bug fix in autologin

2001/04/11  dam's  <damien@mandrakesoft.com>

	* share/themes-mdk.rc: tooltips

	* bootlook.pm: updated
	corrected

	* tinyfirewall.pm: installation of package : not at the same place

	* netconnect.pm: updated
	added driver for pcmcia, corrected eth conf for pppoe

2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: added missing LD_LOADER for calling rpm.

	* printerdrake.pm: fixed probe on kernel 2.4.
	make printer devices more accurate.
	removed limitation to only one port probed

	* pkgs.pm: added missing use of LD_LOADER for starting parsehdlist on
	upgrade.

	* detect_devices.pm: avoid need of shell for live upgrade on serial_probe
	(removed 2>/dev/null which
	is not necessary).
	fixed printer probe (usb and parallel).

	* mouse.pm: fix wacom usb tablet

	* standalone/printerdrake: added missing take into account of
	/etc/modules.conf

	* lang.pm: added missing LD_LOADER reference and remove old code
	commented.

2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: unfuzzyize
	sync with new msg in services.pm and compssUsers
	sync with pablo update
	fixes of translations
	write the shitload of untranslated and fuzzy msg

	* standalone/tinyfirewall: i18n title

	* services.pm: have many more services tooltipped from here so we can get
	translations afterwards

	* share/compssUsers: fix typos of rpmsrate groups

	* standalone/drakgw: kosmetik
	do i18n for title also

2001/04/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: Added reference to netscape-chinese_big5 file

	* share/po/DrakX.pot, share/po/wa.po: Updated Walloon file
	Updated po files
	Updated Slovak, Walloon and Polish files

	* share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/de.po,
	share/po/ko.po, share/po/ja.po, share/po/is.po, share/po/zh_TW.Big5.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/zh_CN.GB2312.po, share/po/sk.po, share/po/vi.po,
	share/po/ca.po, share/po/cs.po: Updated po files
	Updated Slovak, Walloon and Polish files

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/ga.po,
	share/po/sr.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/cy.po, share/po/nl.po, share/po/sv.po, share/po/hu.po,
	share/po/no.po, share/po/th.po, share/po/el.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/af.po: Updated po files

2001/04/11  Pixel  <pixel@mandrakesoft.com>

	* run_program.pm (rooted): don't call install_any::check_prog if rooted

	* standalone/drakboot: make it work (why was bootloader::install
	commented?)

	* share/compssUsers: adapt for new profile choosing layout

	* Makefile: take cardmgr-*

	* install_steps_interactive.pm (chooseGroups): warn if chosen size is too
	big
	translate the ``path'' in profile selection

	* share/po/i18n_compssUsers: relooking

	* any.pm (setupBootloader): translate the bootloaders to use
	(setupBootloader): nicer look&feel

	* install_any.pm (fsck_option): add a closing ``"'' so that strings to
	i18n extraction works
	(fsck_option): add a closing ``"'' so that strings to i18n extraction
	works
	(check_prog): make it work

	* install_steps_gtk.pm (reallyChooseGroups): relook
	(installPackages): pressing "Details" gives you more detailed info
	(reallyChooseGroups): start relooking
	(installPackages): don't display advertising if less 20MB of packages
	translate the ``path'' in profile selection

2001/04/11  warly

	* share/compssUsers: Add descr for servers

2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: make printer devices more accurate.
	removed limitation to only one port probed

	* mouse.pm: fix wacom usb tablet

	* standalone/printerdrake: added missing take into account of
	/etc/modules.conf

	* detect_devices.pm: fixed printer probe (usb and parallel).

2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* services.pm: have many more services tooltipped from here so we can get
	translations afterwards

	* share/po/fr.po: write the shitload of untranslated and fuzzy msg

	* share/compssUsers: fix typos of rpmsrate groups

2001/04/11  Pixel  <pixel@mandrakesoft.com>

	* run_program.pm (rooted): don't call install_any::check_prog if rooted

	* diskdrake.pm (More): fix exception relaunching

	* install_any.pm (check_prog): make it work

	* any.pm (setupBootloader): nicer look&feel

	* standalone/drakboot: make it work (why was bootloader::install
	commented?)

	* Makefile: take cardmgr-*

2001/04/11  fabman

	* share/po/es.po: updated spanish .po file

2001/04/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: make printer devices more accurate.
	removed limitation to only one port probed

	* mouse.pm: fix wacom usb tablet

	* standalone/printerdrake: added missing take into account of
	/etc/modules.conf

	* detect_devices.pm: fixed printer probe (usb and parallel).

2001/04/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: write the shitload of untranslated and fuzzy msg

2001/04/11  Pixel  <pixel@mandrakesoft.com>

	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
	  - completly remove po's (will be getFile'd)
	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)

	* standalone/drakboot: make it work (why was bootloader::install
	commented?)

	* share/aliases: add rmmod -> insmod_

	* lang.pm (get_x_fontset): special cases for some big (size) fonts

	* Makefile: take cardmgr-*

	* install_any.pm (check_prog): make it work
	(check_prog): if a prog isn't available, try to fetch it via getFile
	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
	stage2
	to allow a getAndSaveFile.
	(getAndSaveFile): if only one arg is given, assume the name is the same

	* standalone/XFdrake: fix bug for running xfs

	* any.pm (setupBootloader): nicer look&feel

	* diskdrake.pm (More): fix exception relaunching
	check resize_reiserfs is there or get it

	* run_program.pm (rooted): don't call install_any::check_prog if rooted
	in install, call install_any::check_prog to allow shadow progs which are
	fetched when needed via getFile

	* share/list: remove rmmod (is now a symlink)

2001/04/11  siegel

	* share/po/de.po: updated german version

2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po: Updated Catalan file

2001/04/10  Pixel  <pixel@mandrakesoft.com>

	* Makefile: 
	  - fix wiz_*.png removing
	  - fix copying cardmgr* which included cardmgr.o

2001/04/11  Pixel  <pixel@mandrakesoft.com>

	* tools/make_mdkinst_stage2: to lighten mdkinst_stage2:
	  - completly remove po's (will be getFile'd)
	  - remove LVM progs, resize_reiserfs, big fonts (will be getFile'd)

	* standalone/XFdrake: fix bug for running xfs

	* diskdrake.pm: check resize_reiserfs is there or get it

	* share/aliases: add rmmod -> insmod_

	* install_any.pm (check_prog): if a prog isn't available, try to fetch it
	via getFile
	(remove_bigseldom_used): created, purpose: remove unneeded stuff on
	stage2
	to allow a getAndSaveFile.
	(getAndSaveFile): if only one arg is given, assume the name is the same

	* share/list: remove rmmod (is now a symlink)

	* run_program.pm: in install, call install_any::check_prog to allow shadow
	progs which are
	fetched when needed via getFile

	* lang.pm (get_x_fontset): special cases for some big (size) fonts

2001/04/10  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad network restart

	* my_gtk.pm: corrected bad font

	* network.pm: get rid of ifcfg-
	minor correction

2001/04/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed selection of CDs.

	* devices.pm: added input/event class of devices (necessary for usb wacom
	at install)

2001/04/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
	mdk-stage1/mkinitrd_helper/Makefile: 
	  - honour quiet mode at boot time
	  - fake modprobe to shut up kmod

	* bootlook.pm: do not use french in i18n'ed msg yvounet!!

	* standalone/drakgw: add INTERFACE param in sysconfig parameter for smooth
	interoperation with bastille-firewall

2001/04/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po: Updated Czech file
	Updated po files

	* share/po/ko.po, share/po/ja.po, share/po/id.po, share/po/vi.po: Updated
	Indonesian, Japanese, Korean and Vietnamese files
	Updated po files

	* share/po/DrakX.pot, share/po/wa.po, share/po/fi.po: Added a missing
	translatable string
	Updated po files

	* share/po/ca.po: Updated Catalan file
	Updated po files

	* share/locales.tar.bz2: Added missing file for Vietnamese

	* share/po/bg.po: Updated Bulgarian file
	Updated po files

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
	share/po/fr.po, share/po/ga.po, share/po/sr.po, share/po/de.po,
	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/cy.po,
	share/po/nl.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/da.po, share/po/af.po: Updated po files

2001/04/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm: use gtkset_tip (so that no tip is set when tip eq
	'')
	(create_boxradio): handle double_click
	(ask_from_entries_refW): use radio boxes instead of list/clist if small
	number
	of choices
	(create_ctree): handle single click on node opens the node

	* my_gtk.pm: create and use gtkset_tip
	(_create_window): XSetInputFocus done only on expose_event of the
	topmost window
	(new): ensure only one modal

	* Xconfigurator.pm (main): have an "Ok" button to leave

	* install_steps_gtk.pm: use gtkset_tip
	(choosePackagesTree): fix "Show automatically selected packages"
	create and use gtkset_tip

	* Makefile: 
	  - fix wiz_*.png removing
	  - fix copying cardmgr* which included cardmgr.o

2001/04/10  warly

	* share/rpmsrate: add viavoicemenu_{us,gr,fe}

2001/04/10  yduret

	* bootlook.pm: grub/lilo mode

2001/04/10  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad network restart

	* my_gtk.pm: corrected bad font

	* network.pm: get rid of ifcfg-
	minor correction

2001/04/09  dam's  <damien@mandrakesoft.com>

	* tinyfirewall.pm: typo

2001/04/09  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
	size as the check is done before rounding.

	* bootloader.pm (install_grub): altconfigfile only if /boot is not
	reiserfs :-/

	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
	modules.cz)

	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
	based on pciusbtable

	* share/compssUsers, share/rpmsrate: 
	  - SOUND is now a flag
	  - AUDIO is the group

2001/04/09  siegel

	* tinyfirewall.pm: i18n fixes

2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixes of grub installation using hd.img
	fix the fix for loopback mounting of hd.img.

	* Xconfigurator.pm: fixed always 8bpp for autoDefaultDepth.

	* pkgs.pm: changed transaction error management this way: if a transaction
	fails, DrakX
	tries to make as many transaction as there are package that have failed
	to be
	installed (this means one transaction of only one package). This help
	installing
	most package that are correct (as a transaction that failed cause all
	remaining
	package to be not installed).

2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: 8.0rc -> 8.0

	* rescue/tree/etc/oem: fix english thanks to Kevin

	* standalone/drakgw: do not die when an initscript returns non-0
	(initscripts too buggy)

2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/gl.po, share/po/ca.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated Danish file

	* any.pm: changed  ISO_8859-1 TO ISO-8859-1

2001/04/09  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
	use it for kdm message

	* diskdrake.pm (Create): check for 40MB instead of 32MB for min reiserfs
	size as the check is done before rounding.

	* bootloader.pm (install_grub): altconfigfile only if /boot is not
	reiserfs :-/

	* tools/make_mdkinst_stage2: fix the stage2 too big (was keeping too many
	modules.cz)

	* install2.pm (main): sets umask (seems like default one is no more 022,
	kernel change?)

	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
	(especially for abnt2 (br))

	* install_any.pm (setPackages): also have SOUND set in compssUsersChoice
	based on pciusbtable

	* share/compssUsers, share/rpmsrate: 
	  - SOUND is now a flag
	  - AUDIO is the group

	* lang.pm (load_po): sets $lang::charset to the charset used in the po

2001/04/09  siegel

	* share/po/de.po: fixes

	* Xconfigurator.pm: fixed i18n bug

2001/04/09  yduret

	* standalone/tinyfirewall: button policy (thx gc)

	* standalone/drakgw: deyvounification : remove some un-useful comments in
	code

2001/04/09  dam's  <damien@mandrakesoft.com>

	* tinyfirewall.pm: corrected

	* standalone.pm: install function now returns the return value of the
	system.

	* netconnect.pm: corrected buggy cable
	removed buggy modem screen repetition

2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
	applied).
	fixed cancel support.
	added conditional restart of gpm on mouse configuration change.

	* fs.pm: removed notail option for reiserfs.

	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
	DrakConf only).

	* install_any.pm: added missing package to copy.

	* rescue/tree/etc/oem: fixes of grub installation using hd.img
	fix the fix for loopback mounting of hd.img.
	fixed hd.img access right.
	make kernel22 installed for every oem install...
	moved some package to closure instead of installed.
	added some missing packages.
	added nolock option for nfsmount.
	added missing package to copy.

2001/04/09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/init.c: fix Traktopel Maxim thanks to Kevin Lawton

	* mdk-stage1/Makefile: 8.0beta -> 8.0rc

	* standalone/drakgw: fix for when there is an already existing rc.firewall
	complies with old format of drakgw so that upgrades will work

	* rescue/tree/etc/oem: fix english thanks to Kevin

2001/04/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* any.pm: changed  ISO_8859-1 TO ISO-8859-1

2001/04/09  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm, install_steps.pm, any.pm: create to_utf8 from po strings,
	use it for kdm message

	* interactive.pm (ask_from_treelistf): make it behaves correctly when
	"cancel" is clicked

	* Xconfigurator_consts.pm, Xconfig.pm, Xconfigurator.pm: handle XkbModel
	(especially for abnt2 (br))

	* install2.pm (main): sets umask (seems like default one is no more 022,
	kernel change?)
	(main): log the umask

	* devices.pm (entry): add hd[ijkl]*

	* bootloader.pm (install_lilo): better handling of map-drive (there's not
	always only 2 disks!)

	* lang.pm (load_po): sets $lang::charset to the charset used in the po

2001/04/09  siegel

	* share/po/de.po: fixes

2001/04/09  yduret

	* standalone/drakboot: added lilo/grub

	* bootlook.pm: added lilo/grub mode

2001/04/09  dam's  <damien@mandrakesoft.com>

	* modules.pm: removed use install_any

	* tinyfirewall.pm: corrected

	* netconnect.pm: corrected buggy cable
	removed buggy modem screen repetition
	corrected bad bug when creating new profile

	* standalone.pm: install function now returns the return value of the
	system.

	* Makefile: removed install_any

2001/04/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* standalone/mousedrake: fixed mousedrake (with interactive.pm fixes
	applied).
	fixed cancel support.
	added conditional restart of gpm on mouse configuration change.

	* rescue/tree/etc/oem: fixed hd.img access right.
	make kernel22 installed for every oem install...
	moved some package to closure instead of installed.
	added some missing packages.
	added nolock option for nfsmount.
	added missing package to copy.

	* fs.pm: removed notail option for reiserfs.

	* standalone/keyboarddrake: fixed exit on cancel (should cause trouble in
	DrakConf only).

	* printer.pm: added Till patch for printer (raw queue and PostScript
	queue).

	* install_any.pm: added missing package to copy.

2001/04/09  kjx

	* share/po/zh_CN.GB2312.po: translate before 8.0 release

2001/04/09  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): log the umask

	* interactive.pm (ask_from_treelistf): make it behaves correctly when
	"cancel" is clicked

	* devices.pm (entry): add hd[ijkl]*

	* bootloader.pm (install_lilo): better handling of map-drive (there's not
	always only 2 disks!)

2001/04/09  yduret

	* bootlook.pm: fix, added lilo/grub frame
	fixed till bug

2001/04/08  dam's  <damien@mandrakesoft.com>

	* rescue/tree/etc/oem, rescue/tree/etc/closurepkgs, install_any.pm: get
	rid of kisdn

	* tinyfirewall.pm: updated
	added package installation

	* netconnect.pm: get rid of kisdn
	updated
	no more askwarn in wizard mode
	updated

	* standalone/tinyfirewall, standalone/drakgw, my_gtk.pm,
	netconnect_consts.pm: updated

	* standalone/net_monitor: removed Data::Dumper
	typo

	* standalone/draknet: updated
	typo
	corrected bad isdn field

2001/04/08  daouda

	* share/rpmsrate: increase quanta weight .

2001/04/08  fabman

	* share/po/es.po: updated spanish .po files

2001/04/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: correct my mistakes on removing some modules from stage1 and
	stage2 (-> remove only from stage1)

2001/04/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/compssUsers.desktop, standalone/draknet: Fixed some english typos

	* standalone/net_monitor, netconnect.pm: Some English changes

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Fixed some english typos
	Updated pot file and various po files

2001/04/08  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (write): remove debugging info :-(

	* bootloader.pm (suggest): add option "quiet" to the kernel in fb
	(requested by chmou)

	* install_steps.pm (afterInstallPackages): remove setting of kde charset
	in kdeglobals (kde is a grown-up now)

2001/04/08  siegel

	* share/po/de.po: new german version
	updates

2001/04/07  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: typo
	typo
	net_monitor incorporation

	* standalone/net_monitor, Makefile.config: net_monitor incorporation

2001/04/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po: updated Croatian files

	* share/po/wa.po, share/po/sr.po, share/po/sp.po, share/po/DrakX.pot,
	share/po/ko.po, share/po/it.po: Updated Korean, Italian, Serbian and
	Walloon files

2001/04/07  warly

	* share/compssUsers: PCL-CVS release v2_9_9
	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
	In directory .:
	              Modified                compssUsers
	In directory po:
	patched       Up-To-Date              po/DrakX.pot
	patched       Up-To-Date              po/ca.po
	patched       Up-To-Date              po/de.po
	patched       Up-To-Date              po/hr.po
	patched       Up-To-Date              po/id.po
	patched       Up-To-Date              po/it.po
	patched       Up-To-Date              po/ja.po
	patched       Up-To-Date              po/ko.po
	patched       Up-To-Date              po/sp.po
	patched       Up-To-Date              po/sr.po
	patched       Up-To-Date              po/vi.po
	patched       Up-To-Date              po/wa.po
	
	  --------------------- End ---------------------
	  -- last cmd: cvs -f update -d -P --

	* share/rpmsrate: PCL-CVS release v2_9_9
	Repository       : :ext:warly@cvs.mandrakesoft.com:/home/cvs/cooker
	Working directory: /home/warly/local/share/mdk/gi/perl-install/share/
	In directory .:
	              Modified                rpmsrate
	
	  --------------------- End ---------------------
	  -- last cmd: cvs -f update -d -P --

2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.

2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: use jeff's suggestions to remove some old stuff
	Sun Happy Meal only for Sparc

	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
	
	  - do not print warning when we are in AUTOMATIC and insmod failed
	because of file-not-found in mar file (raid cards, etc)
	  - print "please include msg from Alt-F3" for this warning message to
	ease further support
	  - print pci entry of cards found in te logs

	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c,
	mdk-stage1/mkinitrd_helper/Makefile: steal raid_autorun from rh

2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po, share/po/id.po: Updated Catalan and Indonesian files

	* share/po/ja.po, share/po/vi.po: Updated Japanese and Vietnamese files

2001/04/06  siegel

	* share/po/de.po: updates

2001/04/06  yduret

	* standalone/drakgw: swap cancel/configure button

2001/04/06  dam's  <damien@mandrakesoft.com>

	* standalone/draknet2: dead code

	* standalone/net_monitor: updated

	* netconnect.pm: be quiet

2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed absence of /boot in install CD for oem stuff.
	fixed if label does not exists and grub refuse to read.

	* install_steps_interactive.pm: fixed typo for cups checking of
	installation.
	fixed "No printer" after configuring cups for remove server.
	added log for CD medium chosen par user.

	* pkgs.pm: added killing on child process of transaction that have been
	detached (typically
	with pid > transaction_pid and parent is 1).

2001/04/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: 
	  - correct yvounetification in i18n stuff
	  - remove some remaining debugging printings
	  - add a bit more of explanations when starting drakgw in wizard mode

	* modules.pm: re integrate some TR net cards

	* mdk-stage1/stdio-frontend.c, mdk-stage1/probing.c, mdk-stage1/modules.c:
	
	  - do not print warning when we are in AUTOMATIC and insmod failed
	because of file-not-found in mar file (raid cards, etc)
	  - print "please include msg from Alt-F3" for this warning message to
	ease further support
	  - print pci entry of cards found in te logs

2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated Thai file
	Updated pot file

2001/04/06  yduret

	* standalone/drakgw: swap cancel/configure button

2001/04/06  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: addde tk like routines

	* netconnect.pm: be quiet
	correctedInternetAccessTye and ADSLType

	* Makefile: iCorrected missing file install_any.pm. pixel sux.

	* standalone/draknet2: dead code

	* standalone/net_monitor: updated
	updated
	updated
	updated
	updated
	added

	* pixmaps/net_d.png, pixmaps/net_c.png: added

	* share/logo-mandrake.png: new icon

2001/04/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: fixed if label does not exists and grub refuse to
	read.

	* install_steps_interactive.pm: fixed typo for cups checking of
	installation.
	fixed "No printer" after configuring cups for remove server.
	added log for CD medium chosen par user.

	* pkgs.pm: added killing on child process of transaction that have been
	detached (typically
	with pid > transaction_pid and parent is 1).

2001/04/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated Thai file
	Updated pot file

2001/04/06  Pixel  <pixel@mandrakesoft.com>

	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
	every modules.cz except the
	biggest one

	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
	and use it

	* install_any.pm: add write_fstab
	create install_any::write_fstab and use it

2001/04/06  yduret

	* bootlook.pm: minor fix

	* standalone/drakgw: recoded a embedded && gtk mode

2001/04/05  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (fs_options): created (gets codepage and iocharset)

	* common.pm (if_): better logging of the error

2001/04/06  Pixel  <pixel@mandrakesoft.com>

	* tools/make_mdkinst_stage2: instead of removing modules.cz-2.2*, remove
	every modules.cz except the
	biggest one

	* install_steps.pm, fs.pm, install2.pm: create install_any::write_fstab
	and use it

	* install_any.pm: add write_fstab
	create install_any::write_fstab and use it

2001/04/05  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakboot: 
	  - fix getting result of fsedit::hds
	  - cleanup

	* lang.pm (fs_options): created (gets codepage and iocharset)

	* common.pm (if_): better logging of the error
	(getVarsFromSh): fix for AA="" inspired by chmou the Great (but the
	Great
	what?)

	* bootloader.pm (install_grub): small fix
	(install_lilo): fix lilo's dumbness (when lilo warns about not the first
	drive, it usually fails)

	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.

	* install_steps_interactive.pm (addUser): default autologin to first user
	in beginner

2001/04/05  Pixel  <pixel@mandrakesoft.com>

	* any.pm (autologin): fix
	ask for autologin

	* install_steps_interactive.pm: ask for autologin
	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
	was used. Better have a look at /proc/cmdline

	* bootloader.pm (install_lilo): fix lilo's dumbness (when lilo warns about
	not the first drive, it usually fails)

	* pkgs.pm, share/rpmsrate: 
	  - s/PCI/HW/
	  - add rio500

	* install_any.pm (kernelVersion): fix enormous stupid typo

	* common.pm (getVarsFromSh): fix for AA="" inspired by chmou the Great
	(but the Great
	what?)

	* install_steps.pm (exitInstall): oups, report_bug is no more in
	commands::

	* diskdrake.pm (More): created, asks for supermount, rescue pt, reload.

2001/04/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
	automatically selected
	packages' to go along with the new description

	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')

	* install_any.pm (kernelVersion): fix enormous stupid typo
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

	* install_steps.pm (exitInstall): oups, report_bug is no more in
	commands::
	(configureXBefore): fix the xkb verification (was broken for things like
	``de(nodeadkeys)'')
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

	* any.pm: ask for autologin

	* fs.pm (format_reiserfs): quietly format reiserfs

	* commands.pm: 
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

	* install_steps_interactive.pm: ask for autologin
	(generateAutoInstFloppy): do not use $o->{pcmcia} to know if pcmcia.img
	was used. Better have a look at /proc/cmdline
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

	* share/rpmsrate: 
	  - add ldetect
	  - the default Aurora chose is the categorizing one

2001/04/05  siegel

	* share/po/de.po: fixed typo

2001/04/05  yduret

	* bootlook.pm: fix pablo mess
	install autolgin just if we want to autolog :)

2001/04/05  dam's  <damien@mandrakesoft.com>

	* ChangeLog, bootloader.pm: readded passwd. Must verify that it's secure
	vs msec.

	* my_gtk.pm: added gtksize

2001/04/05  fcrozat

	* share/rpmsrate: No longer propose nautilus-mozilla (required by
	nautilus)
	propose nautilus-trilobite (for Eazel services)

2001/04/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): invert the meaning of 'Show
	automatically selected
	packages' to go along with the new description

	* commands.pm, install_steps_interactive.pm, install_any.pm: 
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

	* fs.pm (format_reiserfs): quietly format reiserfs

	* Xconfigurator.pm (write_XF86Config): try to have $_ interpreted
	(otherwise you get things like ``InputDevice "Stylus$_" "AlwaysCore"'')

	* share/rpmsrate: 
	  - add ldetect
	  - the default Aurora chose is the categorizing one

	* install_steps.pm (configureXBefore): fix the xkb verification (was
	broken for things like ``de(nodeadkeys)'')
	  - move report_bug in install_any
	  - g_auto_install generates the auto_inst.cfg string without output'ing
	it

2001/04/05  siegel

	* share/po/de.po: fixed typo

2001/04/05  yduret

	* bootlook.pm: fix pablo mess
	install autolgin just if we want to autolog :)

2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>

	* share/rpmsrate: added SCANNER and PHOTO groups

2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: make sure to insmod parport_probe alone as it is not
	available in 2.4 kernel and
	this this not a problem (silent error).
	added complete callback to check queue name under cups does contains
	only letters, numerics or underscore.

	* install_steps_interactive.pm: fixed printer description in summary.

	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
	is called.

	* Xconfigurator.pm: removed limitation to 24 bits for SiS card, make sure
	to remove 32 bits depth
	for such card.

	* detect_devices.pm: fixed parport probe for printer under 2.4 kernel.

	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
	some times.

	* printer.pm: added die on error of lpadmin.

	* install_any.pm: fixed multiple wait message (looking+finding packages)

2001/04/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sk.po, share/po/az.po: Updated Azeri and Slovak files

2001/04/04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (tv): add ultracam & usbvideo
	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
	skip them
	(@skip_modules_on_stage1): kaweth and pegasus doesn't work on stage1, so
	skip them

	* install_any.pm (kernelVersion): cleanup

2001/04/04  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_any.pm: kernelVersion mods for PPC

2001/04/04  daouda

	* share/rpmsrate: add gatos for ati tv card .

2001/04/04  Frederic Lepied  <flepied@mandrakesoft.com>

	* share/rpmsrate: added SCANNER and PHOTO groups

2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* live_install: unset locale environment for safety

	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
	(needed for live upgrade so
	that error message are not printed)

	* diskdrake.pm: fixed adding 1 to size for resize2fs, causing a corruption
	some times.

	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share

	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share

	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
	is called.

	* install_any.pm: fixed multiple wait message (looking+finding packages)

2001/04/04  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (setPackages): better handling for tv, photo and scanner

	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
	stage1, so skip them
	  - add photo, tv and scanner
	  - add pegasus and kaweth modules

2001/04/04  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: typo

2001/04/04  daouda

	* share/rpmsrate: add gatos for ati tv card .
	reput klyx but in lower weight (2)
	removed klyx from rpmsrate (bad idea according to pixel )
	add klyx in install "Office KDE"

2001/04/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* live_install: unset locale environment for safety

	* detect_devices.pm: added missing LD_LOADER reference for /bin/dmesg
	(needed for live upgrade so
	that error message are not printed)

	* install_steps_gtk.pm: fixed to use SHARE_PATH instead of /usr/share

	* any.pm, netconnect.pm: use SHARE_PATH instead of /usr/share

	* install2.pm: added selectPackagesToUpgrade the first time choosePackages
	is called.

	* install_steps.pm: disable frame buffer for Matrox cards.

	* install_any.pm: fixed multiple wait message (looking+finding packages)

2001/04/04  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (setPackages): better handling for tv, photo and scanner

	* modules.pm (@skip_modules_on_stage1): kaweth and pegasus doesn't work on
	stage1, so skip them
	  - add photo, tv and scanner
	  - add pegasus and kaweth modules

	* share/compssUsers: remove TV (it is a hardware flag)

2001/04/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: keep mount point configuration trhough multi-passes of
	diskdrake and others.

	* Xconfigurator.pm: prefer XF3 for SiS card.

2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sr.po, share/po/sp.po, share/po/ko.po: Updated Korean file

2001/04/03  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: do not use isSpecial which should only be used on
	partitions
	(main): do not have loopback pseudo hd in hds out of diskdrake

	* modules.pm (load_raw): add the require install_any

	* share/rpmsrate: restore Aurora (i really don't understand what i've done
	with flag AURORA a month ago) to a simple behaviour

	* install_steps_interactive.pm (choosePackages): do not make a special
	case for upgrades (was: select the
	min size, which was on contradiction with profile selection)

	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2

	* standalone/mousedrake: fix horrible error (using an undefined $o)

	* share/list: add back mkreiserfs

	* standalone/XFdrake: don't start xfs if skiptest

	* fsedit.pm (get_fstab): restore loopback::loopbacks because hds contains
	only true
	hard drives (not pseudo one like raid, loopback and lvm)

	* bootloader.pm (suggest): trap strange error. Should not really fix the
	pb

	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
	detetection

	* lang.pm (charset): fix for chineese which have charset in the name

	* Makefile: no more special case for mkreiserfs (can be done via -v 1)

	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
	dependencies"

	* install_any.pm (setPackages): don't preselect profiles in upgrade
	(setPackages): handle Flag:<theflag>
	(setPackages): install kernel22 if install kernel is a 2.2

	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
	(didn't
	propose to format it)
	protect the loading of module lvm-mod

2001/04/03  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_steps_interactive.pm, mouse.pm: PPC keyboard/mouse button
	emulation

2001/04/03  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: a lot of bugfixs
	corrected bad flag test
	corrected bad priority

	* standalone/draknet: typo
	bug fixes
	removed debugging messages and Data::Dumper
	corrected bad flag test

2001/04/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po, share/po/DrakX.pot: Updated Vietnamese file

2001/04/03  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_raw): add the require install_any

	* share/rpmsrate: restore Aurora (i really don't understand what i've done
	with flag AURORA a month ago) to a simple behaviour

	* lang.pm (charset): fix for chineese which have charset in the name

	* install_steps.pm (setupBootloaderBefore): nicer Aurora presence
	detetection

	* Makefile: no more special case for mkreiserfs (can be done via -v 1)

	* install_steps_interactive.pm (choosePackages): do not make a special
	case for upgrades (was: select the
	min size, which was on contradiction with profile selection)

	* fs.pm (real_format_part): give "-v 1" to mkreiserfs if kernel is 2.2

	* install_steps_gtk.pm (choosePackagesTree): better name than "Automatic
	dependencies"

	* install_any.pm (setPackages): don't preselect profiles in upgrade
	(setPackages): handle Flag:<theflag>
	(setPackages): install kernel22 if install kernel is a 2.2

	* share/list: add back mkreiserfs

	* standalone/XFdrake: don't start xfs if skiptest

	* lvm.pm (get_lvs): remove the setting of flag isFormatted which was wrong
	(didn't
	propose to format it)
	protect the loading of module lvm-mod

2001/04/02  dam's  <damien@mandrakesoft.com>

	* modules.pm: corrected petite's mistake

	* netconnect.pm: protecting against non existent files

2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/make_boot_img, mdk-stage1/.cvsignore: fix
	comply to all.kernels policy

	* tools/make_mdkinst_stage2: fix remove of alternate cz modules

2001/04/02  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/cs.po: Updated Czech file

	* lang.pm: codepage option to mount requires only numeric values, eg "437"
	and not "cp437"
	Changed accordingly in the lists

	* share/rpmsrate: Install latin2 Postscript fonts for latin2 locales,
	install fonts-ttf-thai for Thai locale

2001/04/02  Pixel  <pixel@mandrakesoft.com>

	* c/Makefile: small cleanup for pcmcia_probe.c

	* tools/Makefile (install): s/-r/-rf/

	* install_any.pm (setPackages): s/reiserfs-utils/reiserfsprogs/
	(setPackages): install imwheel if nbuttons > 3

	* c/Makefile.PL: small cleanup for pcmcia_probe.c
	don't use pcmcia_probe.o from stage1, better compile it here, otherwise
	perl-install require mdk-stage1 to do compiled => circular dependency

	* Makefile: ignore dams or at least dams errors

	* c/.cvsignore: add pcmcia_probe.c

2001/04/02  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/make_rescue_img: fix pixelization (aka take advantage of
	all.kernels/.main)

2001/04/02  Pixel  <pixel@mandrakesoft.com>

	* tools/Makefile (install): s/-r/-rf/

2001/03/30  Pixel  <pixel@mandrakesoft.com>

	* tools/Makefile (install): fix the globbing for packdrake.pm and
	rpmtools.pm

2001/03/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/drvinst: test for "Card:" and not install, some videoboards are
	not reported as DISPLAY_VGA :-(

	* tools/make_mdkinst_stage2, docs/HACKING, rescue/make_rescue_img,
	mdk-stage1/pci-resource/update-pci-ids.pl, docs/README: support more
	than one boot kernel :-)

	* rescue/list.i386: add reiserfsck

2001/03/29  dam's  <damien@mandrakesoft.com>

	* tinyfirewall.pm: bad message at the end if kernel2.4

	* netconnect.pm: added missing Device in Ethx when saving/loading

	* standalone/draknet: translation

2001/03/28  dam's  <damien@mandrakesoft.com>

	* standalone/tinyfirewall: typo

	* interactive_gtk.pm: corrected pixel shit if embedded

	* standalone/draksec: embedded mode

	* standalone/draknet: corrected gtkpng in gtkwpm
	added translation

	* bootlook.pm: cute button box

	* tinyfirewall.pm: workaround to make it work if kernel 2.4

2001/03/28  fcrozat

	* share/rpmsrate: gmc is back in standard GNOME install, for people with
	existing home

2001/03/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* standalone/mousedrake, mouse.pm, standalone/XFdrake: fixed for
	standalone XFdrake and mousedrake (multi-mouse and
	correct probe (USB)).

	* Xconfig.pm: re-fix mouse fix.
	fixed wrong mouse probe.
	fixed for standalone XFdrake and mousedrake (multi-mouse and
	correct probe (USB)).

	* Xconfigurator.pm: restore multi mouse support for XF3.

2001/03/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/ca.po, share/po/tr.po: Updated Catalan, Danish,
	Finnish, Croatian and Turkish files

	* share/po/sk.po, share/po/ko.po: Updated Finnish, Korean and Slovak files

	* share/po/az.po: Updated Azeri and Danish files

	* share/po/fi.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
	files
	Updated Finnish, Korean and Slovak files

	* share/po/da.po: Updated Catalan, Danish, Finnish, Croatian and Turkish
	files
	Updated Azeri and Danish files

2001/03/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: add fstab in the log

	* interactive_gtk.pm: better default_size setting

	* commands.pm: fix typo
	add fstab in the log

	* install_gtk.pm (test_mouse): ensure the test mouse is not too big

2001/03/28  warly

	* share/rpmsrate: add some commercial apps

2001/03/27  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: added kill USR2 before main

	* share/help.png: changed help button

	* share/help.xpm: changed help

	* tinyfirewall.pm: workaround to make it xork.

2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.

	* Xconfigurator.pm: fixed mouse support for XF3, only one mouse supported
	currently.

2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers

2001/03/27  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/i18n_compssUsers, share/po/vi.po, share/po/fi.po,
	share/po/br.po, share/po/DrakX.pot, share/po/ko.po, share/po/ja.po,
	share/po/wa.po, share/po/de.po, share/po/id.po: Updated Vietnamese,
	Indonesian, Japanese, Korean and Walloon files
	changed i18n_compssUsers to make "path" i18n'able

2001/03/27  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: warnAboutNaughtyServers
	(setPackages): default profiles selection to GNOME, KDE, CONFIG

	* install_steps_interactive.pm: warnAboutNaughtyServers
	(summary): fix displaying of printer configured

	* pkgs.pm: warnAboutNaughtyServers

	* install_steps_gtk.pm (installPackages): catch the no png file exception
	(in case warly is dumb again)

	* my_gtk.pm: try to fix displaying in draksec
	(create_box_with_title): save the box_size in field "box_size"

	* install2.pm, any.pm: remove use of Bastille. get back to the good state
	we had :)

	* interactive_gtk.pm: try to fix displaying in draksec

	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
	LOCALES"zh"
	  - raise WindowMaker
	  - add xfce
	  - am-utils is a server
	  - raise some stuff in CONFIG to have stuff there
	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
	  - DrakConf from 5 to 4

	* lang.pm (langsLANGUAGE): give the list of languages

2001/03/27  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_steps_interactive.pm: change verbage on bootloader warning

2001/03/27  siegel

	* share/po/de.po: minor typo-fixes

2001/03/27  dam's  <damien@mandrakesoft.com>

	* share/help.png: changed help button

	* share/help.xpm: changed help

2001/03/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, pkgs.pm: fixed too early erasing of old rpmlib db. now
	postponed at end of install
	and only if rpm-4.0 or above has been installed.

	* mdk-stage1/init-data/msgboot-graphicallogo.img.bz2: update boot image.

	* Xconfigurator_consts.pm, mouse.pm, Xconfigurator.pm, Xconfig.pm: added
	support for two mice (laptop). The second mice is generally PS/2 as
	probe can says it is present.

2001/03/27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/nfsmount.c: force 8192 bytes for nfs transfers

2001/03/27  Pixel  <pixel@mandrakesoft.com>

	* any.pm, install2.pm: remove use of Bastille. get back to the good state
	we had :)

	* install_any.pm: warnAboutNaughtyServers
	(setPackages): default profiles selection to GNOME, KDE, CONFIG

	* share/rpmsrate: move back Bastille-Curses-module to CONFIG
	  - cleanup LOCALES"zh_*": when there is LOCALES"zh_*", there is
	LOCALES"zh"
	  - raise WindowMaker
	  - add xfce
	  - am-utils is a server
	  - raise some stuff in CONFIG to have stuff there
	  - remove drakxtools from CONFIG (DrakConf requires drakxtools)
	  - DrakConf from 5 to 4

	* install_steps_interactive.pm: warnAboutNaughtyServers
	(summary): fix displaying of printer configured

	* lang.pm (langsLANGUAGE): give the list of languages

	* pkgs.pm: warnAboutNaughtyServers

	* install_steps_gtk.pm (installPackages): catch the no png file exception
	(in case warly is dumb again)

2001/03/27  siegel

	* share/po/i18n_compssUsers: i18n group names

	* share/po/de.po: minor typo-fixes
	new german version

2001/03/26  daouda

	* share/rpmsrate: add mandrake_desk and rootfiles to SYSTEM (rpmsrate)

2001/03/26  fcrozat

	* share/rpmsrate: Install xscreensaver when installing GNOME

2001/03/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: first attempt at pixelization of code (till's cups
	patches)

2001/03/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/hr.po, share/po/wa.po: Updated Croatian, vietnamese and Walloon
	files

	* share/po/vi.po: Updated Croatian, vietnamese and Walloon files
	Updated Portuguese, Swedish and Thai files

	* share/po/pt.po, share/po/th.po, share/po/es.po, share/po/de.po,
	share/po/sv.po: Updated Portuguese, Swedish and Thai files

2001/03/25  Pixel  <pixel@mandrakesoft.com>

	* http.pm (getFile): verify the return value of the server. If not 200
	(aka Ok),
	return undef

	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
	and libqtcups2 for kups in
	pkg_install_if_requires_satisfied

2001/03/25  siegel

	* share/po/de.po: new german version

2001/03/25  fabman

	* share/po/es.po: updated spanish .po file

2001/03/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po: Updated Korean file

	* share/po/sv.po: Updated Swedish file

2001/03/25  Pixel  <pixel@mandrakesoft.com>

	* http.pm (getFile): verify the return value of the server. If not 200
	(aka Ok),
	return undef

	* install_steps_interactive.pm (configurePrinter): add Mesa-common for xpp
	and libqtcups2 for kups in
	pkg_install_if_requires_satisfied

	* any.pm (ask_users): fix dead-loop

	* bootloader.pm (suggest): add entry for nt

2001/03/25  siegel

	* share/po/de.po: new german version

2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/vi.po: Updated Vietnamese file

2001/03/24  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: remove the "use common" which
	is unneeded (and "member" of merge2pcitable
	was clashing)

	* any.pm (ask_users): when "Done" is pressed, do "Accept User" if a user
	is given.

	* install_steps.pm (addUser): disable_user_view (in kdm/gdm) if no users

	* install_any.pm (disable_user_view): created, takes care of gdm too
	(taken from msec)

	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
	francois's bugs ;pp

	* timezone.pm (%l2t): fix for fuzzyChoice

	* share/keyboards.tar.bz2: 
	  - readding with -kb
	  - fixing permissions on xmodmap.kr
	remove before adding again with -kb

	* modules.pm: have natsemi in network.img

2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated Azeri file

2001/03/24  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): fix francois... uh, no too hard. easier to fix
	francois's bugs ;pp

	* timezone.pm (%l2t): fix for fuzzyChoice

	* modules.pm: 
	  - add missing modules (now in sync with pcitable)
	  - add 'media' class
	  - cleanup

2001/03/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Updated Azeri file

2001/03/24  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (copy_advertising): fix escaping $f causing perl to
	segfault :-(
	(copy_advertising): handle i18n'ed advertising

	* pkgs.pm: cleanup

	* modules.pm: 
	  - add missing modules (now in sync with pcitable)
	  - add 'media' class
	  - cleanup

2001/03/24  dam's  <damien@mandrakesoft.com>

	* tinyfirewall.pm: corrected bad exited. reincorporated some ugly code,
	need fixing

2001/03/24  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (copy_advertising): handle i18n'ed advertising

	* modules.pm (read_stage1_conf): cleanup parport stuff obsolote in kernel
	2.4

2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed screen id for Device to be present whenever the
	same BusID is used.
	added multiple tablet support (wacom), moved usb probe for mouse and
	tablet
	at the beginning.

	* printerdrake.pm: Do not ask to configure a printer if standalone,
	previously only for embended.

	* Xconfig.pm: fixed typo for wacom.
	added multiple tablet support (wacom), moved usb probe for mouse and
	tablet
	at the beginning.

	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
	multiple tablet support (wacom), moved usb probe for mouse and tablet
	at the beginning.

2001/03/23  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
	(ask_from_listf_no_check): fix the fix fix

	* common.pm (formatError): created

	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
	DHCP/BOOTP

	* diskdrake.pm (try): format the error (no more "at line ...")
	(Add2LVM): "new" was not i18n'ed

	* install_steps_interactive.pm (exitInstall): no "cancel" button

	* partition_table.pm: add Empty to bad_types

	* fsedit.pm (change_type): When changing a partition type from ext2fs to
	Linux RAID
	(or LVM), the mount point should be removed.

2001/03/23  siegel

	* share/po/de.po: new german version

2001/03/23  dam's  <damien@mandrakesoft.com>

	* tinyfirewall.pm: corrected bad translation
	correctedd typo
	updated
	code cleaning
	tinyfirewall now works.

	* Makefile.config: added tinyfirewall

	* any.pm, mouse.pm: added /dev/modem in modem list selection

	* standalone/drakxconf: added tinyfirewall entry

	* standalone/tinyfirewall: added update code
	updated wrapper to launch tinyfirewall in embedded mode

	* netconnect.pm: added /dev/modem in modem list selection
	netconnect doesn't write the file 1

2001/03/23  fcrozat

	* share/rpmsrate: nautilus-mozilla and xalf are installed by default in
	GNOME
	gmc is not installed by default in GNOME
	gabber gaim are moved to instant messaging
	gcombust in moved to GNOME CD burner
	gtm is installed by GNOME/File transfer
	mozilla is installed by default as www browser
	galeon is installed by default as www browser for GNOME

2001/03/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/syncrpms: added size-stamp test to copy identical file in version,
	release.

	* Xconfig.pm: fixed typo for wacom.
	added multiple tablet support (wacom), moved usb probe for mouse and
	tablet
	at the beginning.

	* Xconfigurator.pm: added multiple tablet support (wacom), moved usb probe
	for mouse and tablet
	at the beginning.
	fixed wrong usage of Screen keyword in Device section, should be present
	and
	reseted for any multi head card with only one BusID.

	* mouse.pm, detect_devices.pm, install_steps_gtk.pm, install2.pm: added
	multiple tablet support (wacom), moved usb probe for mouse and tablet
	at the beginning.

2001/03/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/es.po, share/po/de.po, share/po/fi.po: Added Vietnamese file
	Updated Finnish file

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po,
	share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/vi.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: Added Vietnamese file

2001/03/23  Pixel  <pixel@mandrakesoft.com>

	* any.pm: ifix the dams stuff

	* install_steps_interactive.pm (exitInstall): no "cancel" button

	* share/po/i18n_compssUsers: fix for better compliance with po format

	* netconnect.pm: ifix the dams stuff
	cleanup and enable gzip'ed isdn.db

	* Makefile: gzip ldetect-lst files

	* modules.pm: add i810_audio (still need a script to add missing one and
	keep in sync)

	* bootloader.pm (suggest_floppy): don't add an entry for non-fd0 drives

	* interactive.pm (ask_from_listf_no_check): fix the fix fix fix
	(ask_from_listf_no_check): fix the fix fix
	(ask_from_listf_no_check): fix the bad fix

	* common.pm (formatError): created
	(openFileMaybeCompressed, catMaybeCompressed): added
	(getVarsFromSh): take care of comments

	* network.pm (configureNetworkIntf): gray "IP address" and "Netmask" in
	DHCP/BOOTP

	* partition_table.pm: add Empty to bad_types

	* mouse.pm (detect): never probe psaux (workaround for kernel/xfree bug)

	* fsedit.pm (change_type): When changing a partition type from ext2fs to
	Linux RAID
	(or LVM), the mount point should be removed.

	* detect_devices.pm (isUSBFDUDrive, usbfdus): removed, doesn't scale
	(isFloppyOrHD): floppy type is 'fd', not 'floppy'
	(stringlist): nicer (a la new lspcidrake)

	* Xconfigurator.pm: enable use of gzip'ed Cards+, CardsNames and
	MonitorsDB

	* diskdrake.pm (try): format the error (no more "at line ...")
	(Add2LVM): "new" was not i18n'ed

2001/03/23  Stew Benedict  <sbenedict@mandrakesoft.com>

	* mouse.pm, bootloader.pm: mods to create/move image, to /export for PPC,
	use vmlinux for PPC
	prepend of_dev to initrd stanza in yaboot.conf
	add 1-button mouse for PPC

2001/03/23  siegel

	* share/po/de.po: new german version

2001/03/22  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* tools/i386/netboot/stage1.rtl8139, tools/i386/netboot/stage2.rtl8139:
	Add 8139 grub stage.

2001/03/22  dam's  <damien@mandrakesoft.com>

	* bootlook.pm: corrected mapn

	* standalone/draknet: removed use Data::Dumper

	* netconnect.pm: removed mail informat oin
	comment update

	* tinyfirewall.pm: removed use Data::Dumper
	working on tinyfirewall

2001/03/22  fabman

	* share/po/es.po: changed "swap" for "intercambio" in the spanish .po
	files
	updated DrakX, menudrake and urpmi es.po files

2001/03/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed wrong access to undefined value promoted to
	empty array reference.

2001/03/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/probing.c, mdk-stage1/tools.h: 
	  - fix detection of more than 3 scsi attached devices
	  - cleaner code for cmp of ptr against static strings

2001/03/22  Pixel  <pixel@mandrakesoft.com>

	* standalone/mousedrake: remove test ugliness of dams

	* c/Makefile.PL: no pcmcia_probe in drakxtools

	* modules.pm (load_thiskind): indent as it should be

	* install_steps_interactive.pm (generateAutoInstFloppy): fix the message
	which was uptodate only for
	sparc :-(

	* Xconfigurator.pm: no need for "use Data::Dumper;"

2001/03/22  Stew Benedict  <sbenedict@mandrakesoft.com>

	* modules.pm: no imm,ppa PPC, scan mesh,mac53c94 scsi only, pmac should
	have been mace

2001/03/22  yduret

	* bootlook.pm: mapn works tx dams
	nmap
	added mapn fun to reduce code.. testing it
	added install of rpm
	xpm  png files

	* pixmaps/hori.png, pixmaps/gmon.png, pixmaps/tradi.png, pixmaps/hori.xpm,
	pixmaps/verti.png, pixmaps/gmon.xpm, pixmaps/tradi.xpm,
	pixmaps/verti.xpm: convert xpm to png

2001/03/21  dam's  <damien@mandrakesoft.com>

	* standalone/tinyfirewall, tinyfirewall.pm: new tinyfirewall conf tool

	* netconnect.pm: corrected /etc/sysconfig/network-scripts/net_up.* bug

2001/03/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm: added pci id reference.

	* c/stuff.xs.pm: added support for pci id extraction.

	* Xconfigurator.pm: fixed wrong XFree4 version reference.
	fixed null string in monitor identifier.
	added multi-head support in XFdrake.

2001/03/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: honour embedded mode

	* share/compssUsers: move NETWORKING_FILE (contains stuff for nfs
	mounting..) from Internet
	Station to Network Computer

2001/03/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/de.po,
	share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po,
	share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po,
	share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: Updated
	Croatian and Serbian files

	* share/po/sp.po, share/po/sr.po: Updated Serbian files
	Updated Croatian and Serbian files

	* share/po/az.po: Updated Azeri file
	Updated Croatian and Serbian files

	* share/po/sk.po: Updated Azeri and Slovak files
	Updated Croatian and Serbian files

	* lang.pm: Added fields to charsets table holding info for mount
	(iocharset and
	codepage mount options)

2001/03/21  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (g_default_packages): nice warning if mount in vfat fails

	* share/rpmsrate: move webmin to CONFIG
	remove ipchains and iptables, raise gfcc

	* docs/README: add cvs howto

	* install_steps_interactive.pm (summary): fix

	* detect_devices.pm: old code

	* bootloader.pm (install_lilo): ensure labels don't contain spaces, lilo
	doesn't like them
	(add_kernel): cleanup
	(suggest): make it work with kernel22-secure and no kernel22

	* modules.pm (when_load): move the alias sound to when_load, don't check
	ppc as it
	could be used for non-ppc
	(load_thiskind): fix pb causing imm,ppa,usb-storage to be tested for
	every
	load_thiskind, not only scsi one

	* c/stuff.xs.pm (from_utf8): as pablo said...

2001/03/21  siegel

	* share/po/de.po: new german version
	new german version

2001/03/20  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (@drivers_by_category): if_ization
	(load_thiskind): cleanup

2001/03/21  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (add_kernel): cleanup
	(suggest): make it work with kernel22-secure and no kernel22

	* share/rpmsrate: remove ipchains and iptables, raise gfcc

2001/03/20  dam's  <damien@mandrakesoft.com>

	* interactive.pm: no wizard if warning

2001/03/20  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: fix pcmcia functions only on x86
	  - create install_any::unselectMostPackages
	  - use it instead of pkgs::unselectAllPackages (otherwise
	default_packages ends up non-selected)

	* modules.pm (@drivers_by_category): if_ization
	(load_thiskind): cleanup

	* any.pm, install2.pm, share/rpmsrate: use bastille backend

	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86

	* install_steps.pm, install_any.pm: 
	  - create install_any::unselectMostPackages
	  - use it instead of pkgs::unselectAllPackages (otherwise
	default_packages ends up non-selected)

2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>

	* modules.pm, install_steps_interactive.pm, any.pm: make_boot_img: add
	routine for - PPC
	any.pm: double "Append" entry in expert mode for yaboot.conf - PPC
	install_steps_interactive: setup dmasound - PPC
	modules.pm: load Mac hardware modules - PPC

2001/03/20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bug in reading resolv.conf, and changed chmod
	for net_cnx_*

	* interactive.pm: no wizard if warning

	* standalone/draknet: added update after {dis}connecting

2001/03/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* diskdrake.pm: fix formatting of raid

2001/03/20  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: use bastille backend
	  - add nautilus

	* install_steps_interactive.pm: fix pcmcia functions only on x86
	  - create install_any::unselectMostPackages
	  - use it instead of pkgs::unselectAllPackages (otherwise
	default_packages ends up non-selected)
	(setupSCSI): don't pcmcia_probe if testing
	  - tellAboutProprietaryModules moved to setupSCSI
	  - miscellaneous step re-enabled, called Security
	  - pcmcia_probe moved to setupSCSI, skipped in noauto

	* any.pm: use bastille backend

	* install2.pm: use bastille backend
	  - tellAboutProprietaryModules moved to setupSCSI
	  - miscellaneous step re-enabled, called Security
	  - pcmcia_probe moved to setupSCSI, skipped in noauto
	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
	parameter any more)

	* netconnect.pm (modem_detect_backend): cleanup

	* c/stuff.xs.pm, c/Makefile.PL: fix pcmcia functions only on x86
	have pcmcia_probe in stage2 (for non pcmcia.img, stage1 doesn't give the
	parameter any more)

	* Makefile: install cardmgr

	* install_any.pm: 
	  - create install_any::unselectMostPackages
	  - use it instead of pkgs::unselectAllPackages (otherwise
	default_packages ends up non-selected)
	(setPackages): install usbd in case of usb

	* install_steps.pm: 
	  - create install_any::unselectMostPackages
	  - use it instead of pkgs::unselectAllPackages (otherwise
	default_packages ends up non-selected)

2001/03/20  Stew Benedict  <sbenedict@mandrakesoft.com>

	* any.pm, netconnect.pm, detect_devices.pm: any.pm: enable module load PPC
	detect_devices.pm: forgot to remove commented code after test
	netconnect.pm: load macserial module for PPC

2001/03/20  dam's  <damien@mandrakesoft.com>

	* standalone/draknet, netconnect.pm: improved connection windows, and
	loading / saving of /etc/sysconfig/network-scripot/net�cnx*

2001/03/20  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: 
	  - add nautilus

	* install_any.pm (setPackages): install usbd in case of usb

	* Makefile: install cardmgr

2001/03/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* fsedit.pm: fix loopback appearing twice in format partition

	* diskdrake.pm: fix "loopback" name of loopback tab in diskdrake

2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po: updated korean file
	Updated po files

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files

2001/03/19  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (computeGroupSize): fix hacks, better hacks
	(saveCompssUsers): fix

	* install_steps_interactive.pm (chooseGroups):
	  - make the computed size work
	  - unselectAll when a profile is unselected

	* interactive_gtk.pm (ask_from_entries_refW): better sizing in case of
	scrolls

2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>

	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC

2001/03/19  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corrected graphical layout for newbies

	* netconnect.pm: added net_cnx_{up, down} save

2001/03/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ko.po: updated korean file
	Updated po files

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: Updated po files

2001/03/19  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (computeGroupSize): fix hacks, better hacks
	(saveCompssUsers): fix

	* share/rpmsrate: 
	  - add rxvt-CJK
	  - exchange xterm and rxvt
	  - move bc from SCIENCES to SYSTEM

	* interactive_newt.pm (ask_from_entries_refW):
	  - ensure the width is less than $width - 7 (in french and 80x25, the
	treelist was too big)
	  - if term is very big, use 10 lines instead of 5
	  - if no button is asked, but one in any case otherwise it's buggy

	* install_steps_interactive.pm (chooseGroups):
	  - make the computed size work
	  - unselectAll when a profile is unselected

	* interactive.pm (ask_from_listf_no_check): fix fix
	(ask_from_listf_no_check): fix the filtering of exceptions

2001/03/19  Stew Benedict  <sbenedict@mandrakesoft.com>

	* mdk-stage1/stage1.c: stage1.c: fix for rescue image PPC

2001/03/18  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/lomount.h, mdk-stage1/lomount.c, mdk-stage1/disk.c: fix for
	hd-install when you provide a not valid ISO (cd #2 for example)

	* mdk-stage1/frontend.h, mdk-stage1/minilibc.h, mdk-stage1/stage1.h,
	mdk-stage1/log.h: use some help with __attribute__

2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/tree/etc/rc.sysinit: load sr_mod and sd_mod at startup

	* mdk-stage1/Makefile.mkinitrd_helper, mdk-stage1/.cvsignore: sync

	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
	editing ask_from_entries in stdio mode

	* mdk-stage1/pci-resource/Makefile: do not use marfiles for deps

2001/03/17  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (write_langs): in case of empty %_install_langs, don't write it

	* install_steps.pm (pkg_install_if_requires_satisfied): better logging

	* share/rpmsrate: add gpm & evolution

2001/03/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/insmod-busybox/utility.c: fix insmod calling realloc(0,0) to
	work with dietlibc

	* mdk-stage1/insmod-busybox/Makefile: also build standalone insmod-DIET
	for testing purposes..

	* mdk-stage1/mkinitrd_helper/Makefile: bump version to 1.0.1 for new
	mkinitrd package release

	* mdk-stage1/stdio-frontend.c: handle left and right arrow keys, in
	editing ask_from_entries in stdio mode

2001/03/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sv.po: updated Swedish file

	* share/keyboards.tar.bz2: Added a Korean keyboard, fixed bug in Japanese
	keyboard

	* keyboard.pm: Added choice of Korean keyboard

2001/03/17  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (write_langs): in case of empty %_install_langs, don't write it

	* install_steps.pm (pkg_install_if_requires_satisfied): better logging

	* share/rpmsrate: add gpm & evolution

2001/03/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/Makefile: refine deps

	* mdk-stage1/mkinitrd_helper/mkinitrd_helper.c, mdk-stage1/Makefile,
	mdk-stage1/mkinitrd_helper/Makefile: write down mkinitrd_helper

	* mdk-stage1/insmod-busybox/insmod.c: force load

2001/03/16  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (setPackages): set flag "TV" when bttv hardware is there

	* share/compssUsers, share/rpmsrate: move out TV from VIDEO

	* diskdrake.pm (Type): fix the code verifying size >32 for reiserfs

	* modules.pm (write_conf): better logging

	* c/stuff.xs.pm: add from_utf8

	* c/stuff.pm (headerGetEntry): use from_utf8 on group, summary and
	description

2001/03/16  Stew Benedict  <sbenedict@mandrakesoft.com>

	* tools/ppc/magic, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/convert,
	tools/ppc/yaboot, tools/ppc/mapping: gi/tools/ppc/convert, magic,
	mapping, mkhybrid-1.12b5.4, yaboot - re-add - my bad
	gi/tools/ppc/convert, magic, mapping, mkhybrid-1.12b5.4, yaboot -
	remove/re-add - did not use -kb switch - thx Pixel

2001/03/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: SiS card are no more prefered for XF3.
	added standalone support to prefer XF3 or XF4 to
	keep current used server version.

	* standalone/XFdrake: remove duplicate begin label.
	take care of existing configuration.

2001/03/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: skip dc395x_trm on stage1
	dc395x_trm is back in 2.4

	* share/compssUsers: try to enhance

2001/03/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: updated Azeri file

2001/03/15  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator_consts.pm, Xconfigurator.pm: andre@node1583e.a2000.nl says
	this is not needed anymore :)

2001/03/15  Stew Benedict  <sbenedict@mandrakesoft.com>

	* tools/ppc/magic, tools/ppc/convert, tools/ppc/iboot,
	tools/ppc/mkINSTALLCD, tools/ppc/mkhybrid-1.12b5.4, tools/ppc/yaboot,
	tools/ppc/mapping: gi/tools/ppc/convert, magic, mapping, mkINSTALLCD,
	mkhybrid-1.12b5.4, yaboot: create PPC CD

	* install_steps_interactive.pm, detect_devices.pm, bootloader.pm:
	bootloader.pm, detect_devices.pm, install_steps_interactive.pm: changed
	temporary file read/write per Pixel

	* Xconfigurator.pm: force 1024x768 on Powerbook

	* tools/ppc/README: README: README for creating PPC boot CD

2001/03/14  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: changed label + profile before types..

2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po,
	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/Changelog, share/po/sk.po,
	share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po,
	share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po,
	share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po:
	corrected the script and updated po files

2001/03/14  Pixel  <pixel@mandrakesoft.com>

	* share/compssUsers: keep only one Development entry

	* install_steps_gtk.pm, pkgs.pm: fix the compssUsers interpretation

	* bootlook.pm: fix for perl2fcalls

	* install_steps_interactive.pm (chooseGroups): disable the size display as
	it is wrong (for the beta2)

2001/03/14  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_gtk.pm,
	partition_table_mac.pm, bootloader.pm: fix bootstrap partition
	creation/tracking
	allow Xpmac to launch in 2 modes based on cmdline

2001/03/14  siegel

	* share/po/de.po: new german version

2001/03/14  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: changed label + profile before types..

2001/03/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed unselect management of choice, propagate unselection
	correctly to all
	packages requiring unselected package.

	* install_any.pm: use LD_LOADER when invoking parshedlist.

2001/03/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po, share/po/nl.po: updated Norwegian file

	* share/locales.tar.bz2, share/gconv.tar.bz2, share/list,
	share/fonts.tar.bz2: new fonts and locale files

	* share/po/ko.po: Fixed email of Korean translator
	updated Korean file

	* install_steps_interactive.pm, install_gtk.pm, lang.pm, keyboard.pm:
	completed language list
	completed language->keyboard guessing list
	aesthetic changes to an English message (removed \n and let gtk+
	do the formatting, it is nicer)

	* share/po/az.po: Updated Azeri file

2001/03/14  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: fix the compssUsers interpretation
	(readCompssUsers): change the key of compssUsers, added "label"
	(computeGroupSize): fix bug
	(computeGroupSize): fix logging

	* share/gconv.tar.bz2: moved to share/list

	* bootlook.pm: fix for perl2fcalls

	* share/rpmsrate: CLIENT & SERVER is prohibited

	* timezone.pm: 
	  - add many timezones
	  - defaults to GMT
	  - verifier added

	* install_steps_gtk.pm: fix the compssUsers interpretation
	(choosePackagesTree): fix

	* common.pm (bestMatchSentence, bestMatchSentence2): in wantarray, return
	the number
	of matched words/characters

	* share/compssUsers: keep only one Development entry
	CLIENT & SERVER is prohibited

	* install_steps_interactive.pm (chooseGroups): disable the size display as
	it is wrong (for the beta2)
	(chooseGroups): add path for seperating groups, use "label" for the
	group text

	* Makefile: remove gconv

2001/03/13  siegel

	* share/po/de.po: Fixed typos.

2001/03/13  siegel

	* share/po/de.po: Fixed typos.

2001/03/13  dam's  <damien@mandrakesoft.com>

	* share/help.png: changed

2001/03/13  Pixel  <pixel@mandrakesoft.com>

	* install2.pm, install_steps_gtk.pm: compss is deprecated. use compssUsers
	for the tree

	* standalone/drakgw: pixelization

	* share/rpmsrate: HDF can't be at the beginning of the line or it will be
	taken as a flag
	moved icewm to SYSTEM with !KDE !GNOME

	* pkgs.pm: compss is deprecated. use compssUsers for the tree
	(readCompssUsers): get the "path"

	* install_steps.pm: compss is deprecated. use compssUsers for the tree
	renamef created and used

	* detect_devices.pm (burners): don't use cdroms() which return scdX for
	ide burners, and
	isBurner don't use the same technique. so use get() and grep for type
	"cdrom"

	* install_any.pm: compss is deprecated. use compssUsers for the tree
	(setPackages): set {compssUsersChoice}{PCMCIA} if hasPCMCIA
	renamef created and used

	* install_steps_interactive.pm: compss is deprecated. use compssUsers for
	the tree
	(chooseGroups): fix to get back the icons
	(chooseGroups): size computed should work

	* common.pm: renamef created and used

2001/03/13  siegel

	* share/po/de.po: new german translation

2001/03/13  warly

	* share/compssUsers: fix {W,w}orkstation
	remove ^Server and ^Development

2001/03/13  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakgw: pixelization

	* install_steps_interactive.pm (chooseGroups): size computed should work

	* share/rpmsrate: moved icewm to SYSTEM with !KDE !GNOME

	* install_steps.pm, common.pm, install_any.pm: renamef created and used

2001/03/12  dam's  <damien@mandrakesoft.com>

	* Makefile: removed wizard pixmap from install

	* pixmaps/wiz_internet.png, pixmaps/wiz_internet_left.png: updated
	added pixmap for wizard

	* my_gtk.pm: new wizard layout, with pixmaps.
	added ugly workaround for ugly Hseparator

	* share/step-red.png, share/step-orange.png, share/step-orange-click.png,
	share/step-green-click.png, share/step-green.png, share/step-red-on.png,
	share/step-orange-on.png, share/step-green-on.png,
	share/step-green_s.png, share/step-red-click.png: removing bad png
	files...

	* share/help.png: new help button. blah

	* install_any.pm: typo

	* pixmaps/wiz_default_left.png, pixmaps/wiz_default_up.png: updated

	* netconnect.pm: corrected askokcancel -> askyesorno

	* interactive.pm: corrected bad okcanel in wizard mode

	* install_steps_interactive.pm: added $::isInstall

	* share/logo-mandrake_trans.png: new logo for other themes

	* services.pm: removed use Data::Dumper
	corrected bug in display

2001/03/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* modules.pm, lang.pm, commands.pm, detect_devices.pm, pkgs.pm,
	live_install2: fixed live update between GLIBC 2.1 and GLIBC 2.2. should
	work for other
	combination but not tested. fixed locale usage and gtk environment
	interaction (added LOCPATH, GCONV_PATH and GTK_EXE_PREFIX).
	created LD_LOADER environment variable to keep track of right ELF loader
	to be used for the GLIBC used by the live update. added internal PATH
	to LD_LIBRARY_PATH as ELF loader only check this one and not PATH.

2001/03/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: 
	  - make it work as a wizard
	  - make it work with iptables (kernel-2.4)

	* modules.pm: reflect Jeff Garzik's answers to my questions on kernel@

2001/03/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/DrakX.pot, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/bg.po, share/po/de.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/br.po, share/po/ca.po,
	share/po/cy.po, share/po/uk.po, share/po/wa.po, share/po/da.po,
	share/po/cs.po, share/po/zh_TW.Big5.po, share/po/af.po: Updated Basque
	file

2001/03/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): save the compssUsers flattened
	for rpmdrake

	* install_steps_interactive.pm (summary): remove 'clicked' (labels are
	used)
	put everything in %compssUsers, use field flags for the flags :)

	* pkgs.pm (computeGroupSize): log what is found
	(saveCompssUsers): make it work
	(readCompssUsers): clean-up
	(saveCompssUsers): created
	put everything in %compssUsers, use field flags for the flags :)
	(computeGroupSize): created

	* share/rpmsrate: lower Zope (anyway Zope is not in main)

	* fsedit.pm (hds): search for existing lvm in @hds *and* @lvms

	* commands.pm (loadkeys): created

	* install_any.pm (setPackages): don't readCompssUsers with $o->{packages}
	(setPackages): kernel-secure doesn't exist anymore, use kernel22-secure.
	don't use kernel-secure as a kernel-smp.
	put everything in %compssUsers, use field flags for the flags :)
	(setPackages): set compssUsersChoice "3D" if 3D enabled graphic card

	* interactive_gtk.pm (ask_from_entries_refW): add $set for "label" entries
	add "label" type

	* share/compssUsers: change the path format

	* detect_devices.pm (get_mac_model): fix for perl2fcalls

	* interactive.pm: add "label" type

2001/03/12  warly

	* share/compssUsers: add some NETWORKING_* that were empty
	dispach some DEVELOPMENT and SERVER to more appropriate groups
	added path

	* share/rpmsrate: add some NETWORKING_* that were empty
	dispach some DEVELOPMENT and SERVER to more appropriate groups

2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* ftp.pm: do not retry on 550 file unavailable

2001/03/12  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (setPackages): set compssUsersChoice "3D" if 3D enabled
	graphic card

2001/03/11  dam's  <damien@mandrakesoft.com>

	* services.pm: no more restart button

2001/03/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* ftp.pm: do not retry on 550 file unavailable

2001/03/11  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (summary): fix clicked empty handler

	* share/rpmsrate: 
	  - lower tftp-server
	  - a lot of modifs (thanks to Prana)

2001/03/10  dam's  <damien@mandrakesoft.com>

	* standalone/drakxservices: embedded mode

	* my_gtk.pm: added gtkset_border_width
	typo again
	typo
	added gtkmove
	added gtkset_modal and gtkappenditems

	* services.pm: fixed big bug.
	imajor improvement.
	improved.

2001/03/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated Korean file

2001/03/09  dam's  <damien@mandrakesoft.com>

	* standalone/drakxconf: added harddrake

	* my_gtk.pm: applied gtkradio
	created create_boxradio
	in wizard mode : list -> radio buttons
	added gtkradio

	* bootlook.pm: workaround for the graphical layout.

	* install_steps_gtk.pm: applied gtkradio
	created create_boxradio
	in wizard mode : list -> radio buttons

	* printerdrake.pm: if embedded -> no first question

	* interactive_gtk.pm: added tooltips to create_boxradio
	applied gtkradio
	created create_boxradio
	in wizard mode : list -> radio buttons

2001/03/09  Pixel  <pixel@mandrakesoft.com>

	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
	DEVELOPEMENT

2001/03/09  Stew Benedict  <sbenedict@mandrakesoft.com>

	* Xconfigurator_consts.pm: keyboard mapping for PPC

	* detect_devices.pm: routine to detect MacIntosh model code

2001/03/09  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm: added gtkradio

	* standalone/draknet: changed graphical layout, expert mode

2001/03/09  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (read_rpmsrate): handle the special case of packages requiring
	locales-*,
	adding the flag LOCALES"*" for them

	* install_steps_interactive.pm (choosePackages): moved the log to
	install2::choosePackages (to have it in
	auto_installs too)

	* install_any.pm (setPackages): set compssUsersChoice LOCALES"*"

	* install2.pm (choosePackages): log groups choosen

	* share/rpmsrate: a hell lot of modifications, mostly cleanup of
	DEVELOPEMENT
	  - chineese packages
	  - move Aurora's to AURORA (DrakX take care of Aurora)

	* install_steps_gtk.pm (remove_advertising): created

2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log

2001/03/08  Pixel  <pixel@mandrakesoft.com>

	* verify_c: fix the regexp

	* detect_devices.pm (floppies): load module "floppy" before probing

2001/03/08  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: applied if__

2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/init.c: workaround kernel-2.4 bug with /dev/log

2001/03/08  Pixel  <pixel@mandrakesoft.com>

	* verify_c: fix the regexp

	* share/rpmsrate: add i18n'ed packages

	* detect_devices.pm (floppies): load module "floppy" before probing

2001/03/08  dam's  <damien@mandrakesoft.com>

	* common.pm: added if__

	* netconnect.pm: applied if__

2001/03/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: avoid using e2fsck, else it abort by checking partition
	size (which differs).
	fix resize ext2 by using resize2fs.

	* pkgs.pm: changed choice of package for selection.

	* share/list: added resize2fs and dumpe2fs, removed ext2resize which is
	replaced.

2001/03/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dhcp.c: do not segfault in dhcp stuff, when af_packet is not
	honoured by kernel

2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

2001/03/08  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: advertising modifs
	(setPackages): use burners instead of IDEburners

	* bootloader.pm: cleanup

	* interactive.pm (ask_from_listf_no_check): catch wizcancel and return
	undef

	* fs.pm (write_fstab): change again for 'none' checking the mount point
	(write_fstab): special case for device ``none'' (which can be mounted
	twice or more :)

	* my_gtk.pm (_create_window): on delete_event, destroy the window and
	raise wizcancel

	* share/po/fr.po: fix bad translation

	* share/rpmsrate: add i18n'ed packages
	raise kdebase

	* install2.pm, install_steps.pm, install_steps_gtk.pm: advertising modifs

	* detect_devices.pm: cleanup
	(isBurner): use syslog to detect scsi burners

2001/03/08  Stew Benedict  <sbenedict@mandrakesoft.com>

	* install_steps_gtk.pm: encourage Xpmac to run in at least 16bpp

	* partition_table_mac.pm: fixed variable referencing - thx Pixel

2001/03/08  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad pci number -> string

2001/03/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po, share/po/sr.po, share/po/sp.po, share/po/ca.po: updated
	Bulgarian, Catalan and Serbian files

2001/03/08  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (dev2grub): better error reporting

	* tools/cvslog2changelog.pl (%users): add stew

	* install_steps.pm (setupBootloaderBefore): aurora stupid renaming fix

	* share/rpmsrate: raise kdebase
	xcdroast is the best cd burner ui, raise it above others
	lower some EDITORS
	raise vim-X11
	lower xrn, raise pan

	* install_any.pm (setPackages): use burners instead of IDEburners
	(setPackages): at least set BURNER for ide burners

	* any.pm: cleanup

	* install_steps_interactive.pm, install2.pm: re-add miscellaneous step,
	but always hidden (aka automatic)

	* detect_devices.pm (isBurner): use syslog to detect scsi burners

	* fs.pm (write_fstab): special case for device ``none'' (which can be
	mounted
	twice or more :)

	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
	(without mem=)

2001/03/08  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad pci number -> string

2001/03/08  Pixel  <pixel@mandrakesoft.com>

	* tools/i386/netboot/stage2.3c90x, tools/i386/netboot/grub: new versions
	(without mem=)

2001/03/07  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected default focus after detection
	don't test adsl if net install

2001/03/07  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (add_alias): remove the alias block-major-11 as it's
	overriding the
	default alias to sr_mod, and is uneeded with scsi_hostadapter being
	added
	to /etc/modules.conf

	* share/rpmsrate: lower heartbeat

2001/03/07  sbenedict

	* help.pm: * perl-install/help.pm  - typo in yaboot help

	* any.pm: * perl-install/any.pm - fixed two $l vs. @l references -
	bootloader menu, need image/boot in rec mode PPC
	CVl:
	----------------------------------------------------------------------

	* devices.pm: * perl-install/devices.pm - add adbmouse

2001/03/07  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: not use common anymore, uses gtkpng, cosmetic chages

2001/03/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm, bootloader.pm: fixed support for other kernel for
	bootloader entries.
	automatically add 2.2 entries for kernel22 (manage hack-kernel too).

	* Xconfigurator.pm: remove 32 bit depth for S3 Trio3D card.

	* pkgs.pm: added support for killing all child process of a transaction,
	necessary to be
	able to umount cdrom and eject it correctly.

2001/03/07  Pixel  <pixel@mandrakesoft.com>

	* share/fonts.tar.bz2: use gb16fs instead of gb16st

	* modules.pm (add_alias): remove the alias block-major-11 as it's
	overriding the
	default alias to sr_mod, and is uneeded with scsi_hostadapter being
	added
	to /etc/modules.conf

	* share/rpmsrate: lower heartbeat
	lower Mesa's rate

	* install2.pm (main): save $@ in $err so that it's not modified before
	being used

	* share/locales.tar.bz2: remove ending '/' in symlinks not pleasing
	packdrake

	* standalone/drakboot: make it please perl2fcalls

2001/03/07  sbenedict

	* bootloader.pm, Xconfigurator.pm: * perl-install/Xconfigurator.pm - force
	XF4 for PPC in recommended mode
	* perl-install/bootloader.pm - rework get_of_dev to work in live install

	* install_steps_interactive.pm, any.pm, partition_table_mac.pm: *
	perl-install/any.pm - change in partition_table_mac'xxx syntax
	* perl-install/install_steps_interactive.pm - change in
	partition_table_mac'xxx syntax
	
	* perl-install/partition_table_mac.pm - change in
	partition_table_mac'xxx syntax

2001/03/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/fr.po: Fixed French typos reported by tester

2001/03/07  Pixel  <pixel@mandrakesoft.com>

	* share/fonts.tar.bz2: use gb16fs instead of gb16st

	* fsedit.pm: fix typo

	* install2.pm (main): save $@ in $err so that it's not modified before
	being used

	* share/rpmsrate: lower Mesa's rate

	* standalone/drakboot: make it please perl2fcalls

2001/03/06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected bad %intf while savung
	don't ask configuration if expert
	now detecting adsl

	* standalone/draknet: remmoved 'quiting appli' screen

2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: fix save of automatic stage1 info for static network

	* mdk-stage1/init.c: do not display from syslog msg's from RPM telling
	that it
	installed/removed some pkg's

	* mdk-stage1/Makefile: fix includes for init

2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, help.pm, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, standalone/draknet,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po,
	share/po/cs.po, share/po/af.po: corrected some typos, Updated Japanese
	file

2001/03/06  Pixel  <pixel@mandrakesoft.com>

	* perl2fcalls: 
	  - small fix for bootlook.pm
	  - don't display reused

	* detect_devices.pm (stringlist): if no text description, display ids

	* install_steps_interactive.pm (generateAutoInstFloppy): comment old code
	(summary): fixes
	(setupSCSI): cleanup
	(summary): display sound/tv/isdn cards found

	* fsedit.pm (check_mntpoint): don't allow LVM on / or /boot
	(@suggestions_mntpoints): add /boot

	* install_any.pm: hack to make perl2fcalls happy
	(getHds): fix for no hd detected in newbie installs
	(setPackages): s/snd-slot/sound-slot/

	* install_steps_auto_install.pm (@graphical_steps): add
	beforeInstallPackages so that advertisings are there

	* install2.pm (setupSCSI): remove autoSCSI, cleanup

	* http.pm, ftp.pm: don't use install_any

	* modules.pm: add cciss

	* partition_table.pm (add): create 3 primaries before creating an extended
	if DAC960 (/dev/rd/*)
	(add): max number of parts for rd, ida and cciss

2001/03/06  yduret

	* bootlook.pm: pixelisation

2001/03/06  dam's  <damien@mandrakesoft.com>

	* install2.pm: corrected bad file search
	corrected intf setting

	* standalone/draknet: added enable/disable networking button.

	* standalone/drakxconf: updated to be launched frome DrakConf if no
	DISPLAY

	* netconnect.pm: now detecting adsl
	typo
	better load_conf

	* Xconfigurator.pm: cleaned png displaying

	* common.pm: setinhash -> set_in_hash
	added setinhash

	* fs.pm: typo
	use set_in_hash

2001/03/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/cdrom.c: enable probing of all the CDROM drives in automatic
	mode

	* mdk-stage1/Makefile: fix includes for init

2001/03/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: corrected some typos, Updated Japanese file
	updated Lithuanian file

	* help.pm, standalone/draknet: corrected some typos, Updated Japanese file

2001/03/06  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, any.pm, Xconfigurator.pm: move inittab modifying to
	any::runlevel

	* partition_table.pm (add): max number of parts for rd, ida and cciss

	* fs.pm, netconnect.pm, common.pm: set_in_hash is now put_in_hash

	* diskdrake.pm (Create): pixelization

	* fsedit.pm (hds): pixelization

	* install_steps_auto_install.pm (@graphical_steps): add
	beforeInstallPackages so that advertisings are there

	* modules.pm: add cciss

	* install2.pm (main): remove unloading vfat (not needed anymore with
	mdk-stage1)

2001/03/05  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: $mouse->{device} is set if it doesn't exists.

	* Makefile: added pixmaps copying

2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* netconnect.pm, bootlook.pm, help.pm: fixed English typos

2001/03/05  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (generateAutoInstFloppy): use
	generate_automatic_stage1_params

	* c/stuff.xs.pm, my_gtk.pm: XSetInputFocus now done in perl-GTK

	* install_any.pm (generate_automatic_stage1_params): replace
	generate_ks_cfg

2001/03/05  dam's  <damien@mandrakesoft.com>

	* Makefile: added pixmaps copying

	* standalone/draknet: required gtk only if needed, added redirection to
	newt if needed

	* netconnect.pm: $mouse->{device} is set if it doesn't exists.
	corrected short circuit if network install
	corrected bad end message,
	added copying of resolv.conf & modules.conf

	* install2.pm: moved askrootpasswd and adduser before network conf

	* network.pm: removed old NS0 fetching. /etc/resolv.conf is read in
	install2.pm now
	removed setdefaultroute and sethostname

2001/03/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: Updated Latvian, Belarussian and Spanish files

2001/03/05  Pixel  <pixel@mandrakesoft.com>

	* lvm.pm (lv_create): fix typo

	* bootloader.pm: add use devices
	(install_grub): ensure the translated messages are not too big the hard
	way

	* install_any.pm (generate_automatic_stage1_params): replace
	generate_ks_cfg
	(install_urpmi): have "use hdlist ..." in any case

	* my_gtk.pm: XSetInputFocus now done in perl-GTK
	(_create_window): don't care about c::XSetInputFocus not existing

	* any.pm (setupBootloader): pixelization
	(setupBootloader): fix call to get_append

	* interactive.pm (vnew): cleanup

	* common.pm (salt): cleanup

	* install_steps_interactive.pm (generateAutoInstFloppy): use
	generate_automatic_stage1_params

	* c/stuff.xs.pm: XSetInputFocus now done in perl-GTK

	* c/Makefile.PL: compile fix

	* diskdrake.pm (create_buttons4partitions_): fix for displaying LVM

	* Xconfigurator.pm (xtest): use external xtest if standalone

	* install2.pm (main): remove unloading vfat (not needed anymore with
	mdk-stage1)

2001/03/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	diskdrake.pm, share/po/af.po: updated po files

2001/03/04  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Add2LVM): fix bug (causing empty list), make cancel work

	* share/rpmsrate: 
	  - remove autologin
	  - move X11R6-contrib to DEVELOPEMENT and lower rate

2001/03/04  stew   <sbenedict@mandrakesoft.com>

	* any.pm - changes to enable yaboot configuration for PPC

	* diskdrake.pm, fs.pm, partition_table.pm isBootstrap -> isAppleBootstrap

	* install_steps_interactive.pm - auto-add Apple Bootstrap - PPC

2001/03/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, fsedit.pm, lvm.pm, standalone/diskdrake,
	install_interactive.pm, install2.pm: small fixes for LVM

	* diskdrake.pm: don't default the LVM name to 'pp' ;pp
	small fixes for LVM

2001/03/03  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: small fixes for LVM
	(doPartitionDisksAfter): small adaptation for LVMs
	use run_or_die

	* fsedit.pm: small fixes for LVM
	(hds): detect LVMs and return them
	(add): handling of LVMs
	(@partitions_signatures): add new magic of reiserfs

	* bootloader.pm: use run_or_die

	* run_program.pm (run_or_die, rooted_or_die): created

	* install_steps_interactive.pm: cleanup

	* install_any.pm (getHds): handle LVMs. $o->{lvms} contain them
	(setPackages): ask for installation of package lvm when needed
	(suggest_mount_points, find_root_parts): take $fstab as arg instead of
	$hds

	* install2.pm: small fixes for LVM
	(formatPartitions): call vgscan if needed when / is mounted

	* devices.pm (make): better caller in error

	* share/list: add progs for LVM handling

	* install_interactive.pm: small fixes for LVM

	* diskdrake.pm: small fixes for LVM
	  - addition of drive to notebook cleaned
	  - various clean-up
	  - handling of LVMs

	* standalone/diskdrake: small fixes for LVM
	small adaptation

	* lvm.pm: small fixes for LVM
	creation

	* partition_table.pm: add isLVMBased

2001/03/02  stew   <sbenedict@mandrakesoft.com>

	* commands.pm - fdisk locks up machine on report_bug - replace with pdisk PPC

	* install_steps.pm - no bootfloppy, added yaboot.conf - PPC

	* install_interactive.pm - pdisk vs. fdisk - PPC

	* bootloader.pm - added code to create yaboot.conf, run ybin - vmlinux vs. vmlinuz

2001/03/02  stew   <sbenedict@mandrakesoft.com>

	* c/smp.c -stanza for PPC
	
	* detect_devices.pm - added code for MO devices

	* help.pm - help information for yaboot - PPC

	* partition_table.pm - PPC mods

	* partition_table_mac.pm - PPC mods 

	* modules.pm - PPC mods - parallel port not used

	* diskdrake.pm - PPC mods - display like pdisk

	* install2.pm - PPC mod - no bootdisk

	* fs.pm - bootstrap partition - PPC
	
2001/02/27  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: pop up a dialog to quit X when accepting
	configuration

2001/02/27  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm (@MBR_signatures): add yet another grub signature

	* devices.pm (entry): add fd0H1440 and fd1H1440

	* bootloader.pm (mkbootdisk): fix for mkbootdisk using fd0H1440. Must be
	created

2001/02/26  dam's  <damien@mandrakesoft.com>

	* Makefile.drakxtools, pixmaps/hori.xpm, pixmaps/tradi.xpm,
	pixmaps/eth_card_mini.xpm, pixmaps/verti.xpm: new pixmap policy

	* Makefile: typo
	new pixmap policy

	* bootlook.pm: typo
	new pixmap policy
	need to be merged with bootloader

	* standalone/draknet: reincluded Gtk + init Gtk
	thiskind -> thiskind_backend
	new pixmap policy

	* standalone/drakboot: short-circuit to bootlook for the moment.

2001/02/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po,
	share/po/i18n_compssUsers, share/po/DrakX.pot, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: Fixed i18n_compssUsers
	script to produce a correct pot file
	Updated Estonian and Walloon files

	* bootlook.pm: changed I_() to _() so xgettext cna find the translatable
	strings

2001/02/26  Pixel  <pixel@mandrakesoft.com>

	* standalone/drakgw: pixelization

	* install_steps.pm: remove unneeded "use install_interactive"

	* install_steps_gtk.pm (copy_advertising): fix changing for
	advertising_images

2001/02/26  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: should correct bad resolv.conf when swithcinf in
	standalone embedded mode. Not Certified
	fixed standalone edition
	corrected wizard mode.

	* Makefile.drakxtools, Makefile, pixmaps/eth_card_mini.xpm: new pixmap
	policy

	* standalone/draknet: new pixmap policy
	fixed standalone edition

	* bootlook.pm: need to be merged with bootloader

	* interactive_gtk.pm: if wizard, show the button

	* standalone/drakboot: short-circuit to bootlook for the moment.

2001/02/26  Pixel  <pixel@mandrakesoft.com>

	* common.pm (if_): fix for use in scalar context

	* install_steps_interactive.pm (summary): translate mouse description

	* install_steps.pm: remove unneeded "use install_interactive"

	* install_steps_gtk.pm (copy_advertising): fix changing for
	advertising_images

2001/02/26  warly

	* share/compssUsers, share/rpmsrate: remove some packages

2001/02/26  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: if wizard, show the button

	* netconnect.pm: corrected wizard mode.

2001/02/26  Pixel  <pixel@mandrakesoft.com>

	* common.pm (if_): fix for use in scalar context

	* install_steps_interactive.pm (summary): translate mouse description

2001/02/25  dam's  <damien@mandrakesoft.com>

	* share/logo-mandrake-Firewall.xpm, share/logo-mandrake.xpm: changed logo.

	* netconnect.pm: profile handling.
	profile handling
	corrected wizard.

	* standalone/draknet: profile handling.
	profile handling

	* install_steps_interactive.pm: updated

2001/02/25  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the load_deps before all the loadO's

	* install_any.pm (g_auto_install): have formatMountPartitions graphical if
	$graphical

	* install_steps_interactive.pm (generateAutoInstFloppy): use "timeout 1"
	for replay

	* interactive_gtk.pm (ask_from_entries_refW): ensure "advanced" lists
	center the chosen value

2001/02/24  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, install2.pm: move writing to config files from
	install2::selectKeyboard to install_steps

	* share/list, Makefile, tools/i386/mkreiserfs: for now, have mkreiserfs in
	the CVS since the current cooker version is too recent

	* commands.pm (more): handle 'q' to quit

2001/02/24  Pixel  <pixel@mandrakesoft.com>

	* c/Makefile (stuff): fix the fix's fix :'-(

	* detect_devices.pm (pci_probe): fix to clean the log

	* install_steps_interactive.pm (setRootPassword): NIS server must be
	editable

2001/02/23  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
	fully automated install'.

	* install_steps_auto_install.pm (@graphical_steps): specify which step
	should be interactive

	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed

	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
	(configurePrinter): if_'ization

	* install_steps_interactive.pm (exitInstall): ask wether Replay or
	Automated
	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
	automated install'.
	(summary): nicer mouse name

2001/02/23  dam's  <damien@mandrakesoft.com>

	* network.pm, standalone/draknet, netconnect.pm, my_gtk.pm: new wizard
	layout, no use gtk in draknet, minor bugfixes

2001/02/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: added accessor the rpmsrate data of packages.
	avoid rebuilding the database for oem, rpm db is assumed to be fine.

	* rescue/make_rescue_img: removed kernel_reread program.

	* rescue/tree/etc/oem: removed server from selection.
	added mutli CD support to OEM (NFS/DVD transparent)
	fixed selection of package now select much more than before.
	fixed root partition size set to the minimum.

2001/02/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/rpmsrate: move xterm to SYSTEM

2001/02/23  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: move the 'use my_gtk' in 'require my_gtk' and only if
	needed

	* install_steps_auto_install.pm (@graphical_steps): specify which step
	should be interactive

	* c/stuff.xs.pm: hack for macroporcessing in term.h
	use C_DRAKX

	* install_steps.pm (afterInstallPackages): no kdm UserView in NIS
	(configurePrinter): if_'ization

	* share/rpmsrate: add packages installed on demand by DrakX. they are
	specifically flagged
	or flagged 'INSTALL'

	* perl2fcalls: handling of ``package''->import(``what to import'')

	* interactive.pm (vnew): use /usr/X11R6/bin/xtest instead of c::Xtest

	* Makefile (tar-drakxtools): C_RPM and C_DRAKX set to 0

	* install_any.pm (g_auto_install): handle $replay flag. It means a 'not
	fully automated install'.

	* c/Makefile.PL: use C_DRAKX

	* pkgs.pm (setSelectedFromCompssList): fix the fix

	* c/Makefile (stuff.xs): exporting C_RPM and C_DRAKX is needed
	add setting C_DRAKX to 1 by default

	* install_steps_interactive.pm (exitInstall): ask wether Replay or
	Automated
	(generateAutoInstFloppy): handle $replay flag. It means a 'not fully
	automated install'.
	(summary): nicer mouse name

2001/02/23  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): double clicking on list
	means 'Ok'

	* pkgs.pm (setSelectedFromCompssList): fix sillyness

2001/02/22  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corected infinite loop

2001/02/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* rescue/tree/etc/oem: minor cleanup to edit partition size more easily.
	brand new version written in perl, support repartitionning on the fly of
	the
	hard disk and resize of already present FAT partition.

	* rescue/list.i386, rescue/list, rescue/Makefile: make rescue build a bit
	more cleaner (added dependancy).
	added missing file for rescue to enable new oem install.

2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/insmod-modutils/include/elf_hppa64.h,
	mdk-stage1/insmod-modutils/util/alias.h,
	mdk-stage1/insmod-modutils/util/xstrcat.c,
	mdk-stage1/insmod-modutils/util/gzfiles.c,
	mdk-stage1/insmod-modutils/include/elf_arm.h,
	mdk-stage1/insmod-modutils/util/sys_qm.c,
	mdk-stage1/insmod-modutils/util/modstat.c,
	mdk-stage1/insmod-modutils/obj/obj_sparc.c,
	mdk-stage1/insmod-modutils/include/elf_m68k.h,
	mdk-stage1/insmod-modutils/Makefile,
	mdk-stage1/insmod-modutils/util/xstrdup.c,
	mdk-stage1/insmod-modutils/obj/obj_arm.c,
	mdk-stage1/insmod-modutils/obj/obj_m68k.c,
	mdk-stage1/insmod-modutils/obj/obj_hppa64.c,
	mdk-stage1/insmod-modutils/include/elf_sparc64.h,
	mdk-stage1/insmod-modutils/util/sys_dm.c,
	mdk-stage1/insmod-modutils/include/elf_s390.h,
	mdk-stage1/insmod-modutils/obj/obj_s390.c,
	mdk-stage1/insmod-modutils/util/xmalloc.c,
	mdk-stage1/insmod-modutils/util/xsystem.c, mdk-stage1/insmod.h,
	mdk-stage1/insmod-modutils/util/xftw.c,
	mdk-stage1/insmod-modutils/include/elf_i386.h,
	mdk-stage1/insmod-modutils/util/sys_gks.c,
	mdk-stage1/insmod-modutils/util/snap_shot.c,
	mdk-stage1/insmod-modutils/obj/obj_i386.c, mdk-stage1/modules.c,
	mdk-stage1/stage1.c, mdk-stage1/insmod-modutils/include/obj.h,
	mdk-stage1/insmod-modutils/include/elf_ppc.h,
	mdk-stage1/insmod-modutils/obj/obj_reloc.c,
	mdk-stage1/insmod-modutils/include/elf_sparc.h,
	mdk-stage1/insmod-modutils/util/sys_nim.c,
	mdk-stage1/insmod-modutils/obj/obj_ppc.c, mdk-stage1/Makefile,
	mdk-stage1/insmod-modutils/include/elf_hppa.h,
	mdk-stage1/insmod-busybox/insmod.c,
	mdk-stage1/insmod-modutils/util/meta_expand.c,
	mdk-stage1/insmod-modutils/util/arch64.c,
	mdk-stage1/insmod-modutils/obj/obj_load.c,
	mdk-stage1/insmod-modutils/obj/obj_hppa.c,
	mdk-stage1/insmod-busybox/insmod.h,
	mdk-stage1/insmod-modutils/include/elf_ia64.h,
	mdk-stage1/insmod-modutils/obj/obj_ia64.c,
	mdk-stage1/insmod-modutils/obj/obj_sparc64.c,
	mdk-stage1/insmod-modutils/include/elf_mips.h,
	mdk-stage1/insmod-modutils/include/module.h,
	mdk-stage1/insmod-modutils/obj/obj_mips.c,
	mdk-stage1/insmod-modutils/util/sys_cm.c,
	mdk-stage1/insmod-modutils/obj/obj_alpha.c,
	mdk-stage1/insmod-modutils/include/kerneld.h,
	mdk-stage1/insmod-modutils/util/xrealloc.c,
	mdk-stage1/insmod-modutils/obj/Makefile,
	mdk-stage1/insmod-modutils/insmod-frontend.c,
	mdk-stage1/insmod-modutils/obj/obj_common.c,
	mdk-stage1/insmod-modutils/include/modstat.h,
	mdk-stage1/insmod-modutils/util/Makefile,
	mdk-stage1/insmod-modutils/include/config.h,
	mdk-stage1/insmod-modutils/util/logger.c,
	mdk-stage1/insmod-modutils/obj/obj_kallsyms.c,
	mdk-stage1/Makefile.common, mdk-stage1/insmod-modutils/include/util.h,
	mdk-stage1/insmod-modutils/util/config.c,
	mdk-stage1/insmod-modutils/include/version.h,
	mdk-stage1/insmod-modutils/include/kallsyms.h,
	mdk-stage1/insmod-modutils/include/elf_alpha.h,
	mdk-stage1/insmod-modutils/util/sys_oim.c,
	mdk-stage1/insmod-modutils/insmod.c: use modutils for non Intel arch's

2001/02/22  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
	not
	over existing /etc/fstab. Fix some stupid stuff

	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path

	* install2.pm (main): don't set a special $remote_path PATH for
	postInstallNonRooted
	(otherwise install's modprobe is not used, and you can't "modprobe
	vfat",
	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
	found.

	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
	non-scrolled

2001/02/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/include/stdlib.h, mdk-stage1/minilibc.c,
	mdk-stage1/init-libc-headers.h,
	mdk-stage1/dietlibc/include/sys/select.h, mdk-stage1/Makefile,
	mdk-stage1/init.c, mdk-stage1/minilibc.h,
	mdk-stage1/dietlibc/include/unistd.h,
	mdk-stage1/dietlibc/include/sys/socket.h,
	mdk-stage1/dietlibc/include/signal.h: have "init" compiled against
	dietlibc (rather than glibc) on non-Intel arch's

2001/02/22  Pixel  <pixel@mandrakesoft.com>

	* install_steps_auto_install.pm: $graphical is now a module variable. Can
	be changed from everywhere

	* fs.pm (write_fstab): clean-up, $fstab takes precedence over @to_add, but
	not
	over existing /etc/fstab. Fix some stupid stuff

	* modules.pm, commands.pm: call /usr/bin/insmod_ with full path

	* install2.pm (main): don't set a special $remote_path PATH for
	postInstallNonRooted
	(otherwise install's modprobe is not used, and you can't "modprobe
	vfat",
	even if "/usr/bin/modprobe vfat" doesn't work because insmod_ is not
	found.

	* my_gtk.pm (create_box_with_title): disallow focusing on text if it is
	non-scrolled

	* interactive.pm (ask_from_entries_refH_powered_normalize): fix setting
	type to 'list' in
	case of format. should be only set if type is unset
	(ask_from_entries_refH_powered_normalize): if list+format then type is
	'list', combo not accepted (hacky?)

	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
	call create_okcancel

2001/02/22  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_entries_refH_powered_normalize): if list+format
	then type is
	'list', combo not accepted (hacky?)

	* install_steps_auto_install.pm: $graphical is now a module variable. Can
	be changed from everywhere

	* interactive_gtk.pm (ask_from_entries_refW): if no button wanted, don't
	call create_okcancel

2001/02/21  dam's  <damien@mandrakesoft.com>

	* network.pm, netconnect.pm: netconnect recode, wizard compatible.
	network.pm modified for wizard. Still need work for ask_yesorno,
	ask_okcancel. +debugging of course

	* standalone/draknet: updated (don't remember what)

2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/tools.c, mdk-stage1/Makefile,
	mdk-stage1/dietlibc/lib/vprintf.c, mdk-stage1/dietlibc/lib/vfprintf.c,
	mdk-stage1/minilibc.h, mdk-stage1/minilibc.c,
	mdk-stage1/init-libc-headers.h: 
	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
	  - cleanup of "init"

	* mdk-stage1/init.c: 
	  - fix "init" on ppc (do not use minilibc on non-i386 arch's)
	  - fix segfault of dietlibc-linked apps (broken va_stuff in dietlibc)
	  - cleanup of "init"
	fix up syslog logging stuff

2001/02/21  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (generateAutoInstFloppy): removed

	* install_any.pm (g_auto_install): use selected_leaves for
	default_packages to reduce the
	list of packages (aka cleanup auto_inst.cfg)
	(g_default_packages): created

	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
	and g_default_packages calls in
	advanced

	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use

	* pkgs.pm (selected_leaves): created

	* install2.pm (main): do postInstallNonRooted before postInstall (so that
	'modprobe
	vfat' can be done in postInstallNonRooted and used in postInstall)
	  - move the loadO of patch/defcfg after loading modules.dep
	  - generateAutoInstFloppy is no more a step
	  - removed use Data::Dumper

2001/02/21  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* share/rpmsrate: Add iputils to SYSTEM.

2001/02/21  dam's  <damien@mandrakesoft.com>

	* docs/wizard.doc: putain de doc de merde pout petite qui est trop d�bile

	* interactive.pm, my_gtk.pm: corrected wizard mode.

2001/02/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/TECH-INFOS: sync doc with disk automatic installs

	* mdk-stage1/disk.c: add support for automatic (ex-kickstart) in disk
	installs

2001/02/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2001/02/21  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (generateAutoInstFloppy): removed

	* install_any.pm (g_auto_install): use selected_leaves for
	default_packages to reduce the
	list of packages (aka cleanup auto_inst.cfg)
	(g_default_packages): created

	* install_steps_interactive.pm (exitInstall): add generateAutoInstFloppy
	and g_default_packages calls in
	advanced

	* netconnect.pm, partition_table.pm, fsedit.pm: cleanup Data::Dumper use

	* pkgs.pm (selected_leaves): created

	* install2.pm (main): do postInstallNonRooted before postInstall (so that
	'modprobe
	vfat' can be done in postInstallNonRooted and used in postInstall)
	  - move the loadO of patch/defcfg after loading modules.dep
	  - generateAutoInstFloppy is no more a step
	  - removed use Data::Dumper

2001/02/20  Pixel  <pixel@mandrakesoft.com>

	* printerdrake.pm: fix typo

	* install_steps.pm, install_steps_gtk.pm, install_any.pm: better
	advertising support

2001/02/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/url.h, mdk-stage1/url.c, mdk-stage1/network.c: for HTTP
	installs, make use of Content-Length when available, to display
	progressbar

2001/02/20  Pixel  <pixel@mandrakesoft.com>

	* Makefile: various
	  - pcmcia_config.patch now in tools (no more in install which is
	removed)
	  - copy xpm's (until step icons work with png's)
	  - transform group icons in pngs

	* modules.pm, class_discard.pm, my_gtk.pm, Xconfigurator.pm: various

	* tools/pcmcia_config.patch: pcmcia_config.patch now here

	* printerdrake.pm: fix typo

	* install_any.pm, install_steps.pm, install_steps_gtk.pm: better
	advertising support

2001/02/20  warly

	* share/compssUsers, share/rpmsrate, share/compssList: update rpmsrate

2001/02/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* c/stuff.xs.pm, live_install, pkgs.pm, live_install2: added RPMRC_FILE
	env variable to choose rpmrc file for rpmlib used
	by DrakX, neccessary for live update from a 7.2 or older.
	Check that if something goes wrong with rebuilddb, avoid removing
	old rpm-3 db files.
	Make sure live_install can start from top directory too.

2001/02/20  Pixel  <pixel@mandrakesoft.com>

	* Makefile: various
	  - pcmcia_config.patch now in tools (no more in install which is
	removed)
	  - copy xpm's (until step icons work with png's)
	  - transform group icons in pngs

	* modules.pm, class_discard.pm: various

	* tools/pcmcia_config.patch: pcmcia_config.patch now here

	* my_gtk.pm, Xconfigurator.pm: various
	major move. now ask_from_list returns false when canceled (it doesn't
	die 'ask_from_list canceled' anymore)

	* interactive_gtk.pm, standalone/mousedrake, install_steps_interactive.pm,
	netconnect.pm, standalone/keyboarddrake, install2.pm, interactive.pm,
	any.pm, printerdrake.pm, diskdrake.pm: major move. now ask_from_list
	returns false when canceled (it doesn't die 'ask_from_list canceled'
	anymore)

2001/02/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c: try to print errno's stuff when symlink to
	/tmp/stage2 failed

	* mdk-stage1/dhcp.c: ARP_MAX_RETRIES: s/5/4

2001/02/19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated Estonian file

2001/02/19  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf_no_check): die 'ask_from_list cancel' on
	cancel

	* my_gtk.pm (create_packtable): don't use attach_raw anymore (was a
	sillyme)

2001/02/18  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: typo
	make fbastok happy about button placement.
	little improvements.

2001/02/16  dam's  <damien@mandrakesoft.com>

	* install_gtk.pm: corrected xpm mask

	* network.pm: wireless eth support corrected.

	* share/step-red.xpm, share/step-orange.xpm, share/step-orange-click.xpm,
	share/step-green-click.xpm, share/step-green.xpm, share/step-red-on.xpm,
	share/step-orange-on.xpm, share/step-green-on.xpm,
	share/step-red-click.xpm: re added these xpm files against display mask
	pb.

2001/02/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/init.c: better ansi colors

	* mdk-stage1/dhcp.c: comply with glibc-2.2.2 more strict headers

	* mdk-stage1/stdio-frontend.c: display more nicely when there is a long
	list to choose from (1, 2 or 4 columns)

2001/02/15  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/TECH-INFOS, mdk-stage1/README: update doc

2001/02/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: updated Azeri file

2001/02/15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): fix i_images

	* fsedit.pm (suggestions_mntpoint): fix

2001/02/15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): fix i_images
	(installPackages): traktolpilization and advertising

	* Makefile (get_needed_files): copy png files instead of xpm's

	* fsedit.pm (suggestions_mntpoint): fix

	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup

	* share/list: add GdkImlib stuff

	* perl2fcalls: add Gtk::Gdk::ImlibImage

	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
	if it exists

2001/02/15  dam's  <damien@mandrakesoft.com>

	* my_gtk.pm, any.pm, install_gtk.pm, install_steps_interactive.pm,
	install_steps_gtk.pm, interactive_gtk.pm: added png support. Need to
	test the faces2xpm stuff.

	* share/step-orange-click.xpm, share/rpm-selected.xpm,
	share/step-green-click.xpm, share/step-green.xpm, share/rpm-base.xpm,
	share/ftin.xpm, share/step-orange-on.xpm, share/ftout.xpm,
	share/step-red-click.xpm, share/step-green-on.xpm,
	share/rpm-unselected.xpm, share/step-red.xpm, share/step-orange.xpm,
	share/reload.xpm, share/rpm-semiselected.xpm,
	share/logo-mandrake-Desktop.xpm, share/rpm-installed.xpm,
	share/step-red-on.xpm: removed, png are used instead.

	* standalone/draknet: updated internet and added eth conf

	* share/help.xpm, share/logo-mandrake.xpm: removed, png are used instead.
	added png images

	* share/step-red.png, share/step-orange.png, share/reload.png,
	share/logo-mandrake.png, share/rpm-semiselected.png,
	share/logo-mandrake-Desktop.png, share/rpm-installed.png,
	share/logo-mandrake_sav.png, share/step-red-on.png, share/help_sav.png,
	share/rpm-selected.png, share/step-orange-click.png,
	share/step-green-click.png, share/step-green.png, share/rpm-base.png,
	share/logo-mandrake2.png, share/ftin.png, share/help.png,
	share/step-orange-on.png, share/step-green-on.png, share/ftout.png,
	share/step-red-click.png, share/step-green_s.png, share/themes-mdk.rc,
	share/rpm-unselected.png: added png images

2001/02/15  Pixel  <pixel@mandrakesoft.com>

	* Makefile (get_needed_files): copy png files instead of xpm's

	* install2.pm (main): set SHARE_PATH to /export/Mandrake/mdkinst/usr/share
	if it exists
	(selectKeyboard): give clicked as parameter

	* my_gtk.pm (gtkcreate_png): add error message, syntax cleanup

	* fsedit.pm (suggestions_mntpoint): fix typo

	* share/list: add GdkImlib stuff

	* perl2fcalls: add Gtk::Gdk::ImlibImage

	* install_steps_interactive.pm (summary): better message for i18n

	* install_steps_gtk.pm (installPackages): traktolpilization and
	advertising

2001/02/14  dam's  <damien@mandrakesoft.com>

	* network.pm, standalone/draknet: wireless updated

	* share/help.xpm, share/themes-mdk.rc, share/logo-mandrake.xpm: valentin
	theme :)

2001/02/14  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): add user in group usb

2001/02/14  dam's  <damien@mandrakesoft.com>

	* share/themes-mdk.rc: valentin theme :)
	added drawing theme section

	* network.pm: wireless updated
	updated wireless eth support

	* standalone/draknet: wireless updated

	* share/help.xpm, share/logo-mandrake.xpm: valentin theme :)

2001/02/13  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: network con initiated in draknet.
	netconnect improvement.
	typo

	* network.pm: typo
	corrected domainname setting

	* standalone/draknet: network con initiated in draknet.
	netconnect improvement.

2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/frontend.h, mdk-stage1/network.h,
	mdk-stage1/stdio-frontend.c, mdk-stage1/dhcp.c, mdk-stage1/automatic.c,
	mdk-stage1/newt-frontend.c, mdk-stage1/automatic.h, mdk-stage1/disk.c,
	mdk-stage1/network.c: write down Magic Callback (tm) for static ip stuff

	* mdk-stage1/modules.c: ask for modules parameters everytime in expert
	mode, to avoid wrong autodetections in certain cases
	  - better log of nfs mount errors
	  - don't insmod modules already present (important for bzip2 slowness)

	* mdk-stage1/cdrom.c: better error msg thx to mcdtg

	* mdk-stage1/mount.c, mdk-stage1/nfsmount.c: 
	  - better log of nfs mount errors
	  - don't insmod modules already present (important for bzip2 slowness)

	* mdk-stage1/stage1.c, mdk-stage1/init.c: use exit code 66 for rescue
	better console messages at startup

2001/02/13  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: profile handling updated

	* network.pm: typo
	corrected domainname setting

	* netconnect.pm: finished load_conf

2001/02/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/make_rescue_img, rescue/list: include libs for hostname resolving

	* mdk-stage1/stage1.c, mdk-stage1/init.c: better console messages at
	startup

	* mdk-stage1/tools.c: 
	  - save /etc/resolv.conf for rescue

2001/02/13  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
	non-expert

	* any.pm: md5 now done via crypt

	* install_steps.pm (exitInstall): catch exception of output report.bug
	(for gc)

2001/02/13  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): can be automatic only in
	non-expert

	* tools/cvslog2changelog.pl: fix for gc & fpons
	fix for fredl broken CVS

	* any.pm: md5 now done via crypt

	* install_steps.pm (exitInstall): catch exception of output report.bug
	(for gc)

2001/02/13  dam's  <damien@mandrakesoft.com>

	* network.pm: experimental wireless eth support. Not tested

2001/02/13  Pixel  <pixel@mandrakesoft.com>

	* tools/cvslog2changelog.pl: fix for gc & fpons
	fix for fredl broken CVS

	* c/stuff.xs.pm, c/Makefile.PL, c/md5.h, c/md5_crypt.c, c/md5.c: md5 can
	be done via crypt of glibc, so remove all this

2001/02/13  dam's  <damien@mandrakesoft.com>

	* any.pm: merging difference

	* netconnect.pm: corrected profile handling

	* network.pm: experimental wireless eth support. Not tested

2001/02/12  Pixel  <pixel@mandrakesoft.com>

	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
	docs, rescue, tools)

2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/probing.c: do not close un unbound socket!!

	* c/stuff.xs.pm: close socket everytime in hasNetDevice

	* mdk-stage1/Makefile: tag it 8.0beta instead of 8.0, to avoid future
	potential confusions

	* modules.pm: re include some network modules

2001/02/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* rescue/list: fix vi trouble
	  - add lspci, lspcidrake, vim-minimal
	  - better /etc/issue
	  - better PS1
	  - write embryonic tool (installation of detected drivers according to
	pci cards)

	* rescue/aliases, rescue/tree/etc/issue: fix vi trouble

	* rescue/list.i386, rescue/make_rescue_img, rescue/drvinst: 
	  - add lspci, lspcidrake, vim-minimal
	  - better /etc/issue
	  - better PS1
	  - write embryonic tool (installation of detected drivers according to
	pci cards)

2001/02/12  Pixel  <pixel@mandrakesoft.com>

	* rescue/drvinst: pixelization

	* docs/README: fix doc about Mandrake/base/compss

	* install_steps_gtk.pm (choosePackagesTree): non first choice packages are
	in "Other".

	* install_interactive.pm, any.pm, fsedit.pm, diskdrake.pm: auto_allocate
	partitions choice modified. diskdrake in expert asks what kind
	of auto_allocation is wanted, others choose 'simple' in
	%fsedit::suggestions

	* install2.pm: auto_allocate partitions choice modified. diskdrake in
	expert asks what kind
	of auto_allocation is wanted, others choose 'simple' in
	%fsedit::suggestions
	(main): gc has done it again! /tmp/conf.modules is now
	/etc/modules.conf,
	so load both to keep compatibility.

	* my_gtk.pm: cleanup (remove ask_from_list and _ask_from_list)

	* interactive_gtk.pm (ask_from_entries_refW): use
	$common->{advanced_label}
	(create_ctree): add keyboard shortcuts
	(create_clist): moveto only if row_is_visible

	* interactive.pm (ask_from_entries_refH_powered_normalize): advanced_label
	defaults to
	_("Advanced")

	* tools/addchangelog.pl: log more than mdk-stage1 and perl-install (added
	docs, rescue, tools)

	* install_steps_interactive.pm (configurePrinter): cleanup,
	pkg_install_if_requires_satisfied('xpp',
	'kups') only if a printer is configured (for the case when _("Would you
	like to configure a printer?") is answered no)

	* rescue/tree/etc/rc.sysinit: add floppy module for 2.4

2001/02/10  Pixel  <pixel@mandrakesoft.com>

	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given

	* install_any.pm: add preConfigureTimezone
	add step summary. remove steps configureTimezone and configurePrinter

	* install_interactive.pm: cleanup

	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
	  - lang2keyboards handle keyboard percentages
	  - xmodmaps now named keyboards

	* install_steps_interactive.pm: add step summary. remove steps
	configureTimezone and configurePrinter, modify selectKeyboard

	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
	steps configureTimezone and configurePrinter

	* netconnect.pm: corrected back $install call

2001/02/10  Pixel  <pixel@mandrakesoft.com>

	* standalone/keyboarddrake, share/keymaps_generate, keyboard.pm: 
	  - lang2keyboards handle keyboard percentages
	  - xmodmaps now named keyboards

	* install_steps_interactive.pm: add step summary. remove steps
	configureTimezone and configurePrinter, modify selectKeyboard

	* standalone/draknet, standalone/XFdrake: corrected pkgs_install given

	* install_any.pm: add preConfigureTimezone
	add step summary. remove steps configureTimezone and configurePrinter

	* install2.pm, timezone.pm, install_steps.pm: add step summary. remove
	steps configureTimezone and configurePrinter

	* install_interactive.pm: cleanup

	* netconnect.pm: corrected back $install call

2001/02/09  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm, install2.pm,
	timezone.pm: configureTimezone doesn't take parameter
	/etc/sysconfig/clock

2001/02/09  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm, interactive.pm, interactive_newt.pm: add button
	handling, quite weird behaviour though cuz of newt sillyness

	* install2.pm: configureTimezone doesn't take parameter
	/etc/sysconfig/clock
	(main): have compatibility with old stage1 (rhimage -> image)
	(formatPartitions):
	s|etc/sysconfig/consoletrans|etc/sysconfig/console/consoletrans|
	as it should now be (see lang.pm 1.143)

	* install_steps.pm, install_steps_interactive.pm, timezone.pm:
	configureTimezone doesn't take parameter /etc/sysconfig/clock

2001/02/09  siegel

	* share/po/de.po: new german version

2001/02/08  dam's  <damien@mandrakesoft.com>

	* standalone/drakgw: implemented or updated embedded mode
	added embedded and (ugly) wizard mode.

	* standalone/printerdrake, standalone/mousedrake, standalone/diskdrake,
	standalone/keyboarddrake: implemented or updated embedded mode

	* standalone/draknet: implemented or updated embedded mode
	added embedded mode

	* standalone/XFdrake: implemented or updated embedded mode
	corrected compilation bug.

	* standalone/drakboot: implemented or updated embedded mode
	updated embedded mode. Should work, not tested in real world

	* netconnect.pm: removed testing wizard instruction

2001/02/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* ftp.pm: fixed wrong URLPREFIX formation if no user given.

	* standalone/XFdrake: fix the previous changelog wich was wrong (bad
	spelling),
	added a char in comment to allow a new release (thanks to pixel :-)
	make sure SHARE_PATH is set.
	fixed SHARE_PATH to make sure it is setted.

	* Xconfigurator.pm: added DRI experimental support (sis, radeon). Prefer
	XF3 for SiS card.

	* pkgs.pm: fixed problem for updating hdlist after going back to partition
	step.

2001/02/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/tools.c, mdk-stage1/config-stage1.h, mdk-stage1/network.c:
	better memory detection (from wonderful drakx)

2001/02/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated Norwegian file

2001/02/08  Pixel  <pixel@mandrakesoft.com>

	* common.pm (availableRamMB): cleanup

	* standalone.pm, standalone/XFdrake: make sure SHARE_PATH is set now in
	standalone

2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed unknown package ARRAY... and locales selection
	according to langs.

	* modules.pm: fixed module name without text for SCSI configuration
	dialog, add log.

2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/probing.h, mdk-stage1/stage1.h,
	mdk-stage1/tools.c, mdk-stage1/automatic.c, mdk-stage1/init.c,
	mdk-stage1/probing.c, mdk-stage1/automatic.h, mdk-stage1/modules.c,
	mdk-stage1/network.c: 
	  - use description of network cards when you have to select between
	interfaces; has accuracy even in the case of multiple interface for a
	given kernel module
	  - write down a small "shell" to change parameters on the fly (needs
	compile option SPAWN_INTERACTIVE)

2001/02/07  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): better fix for getting
	max install size.
	(choosePackages): call setSelectedFromCompssList with empty
	compssUsersChoice meaning max

	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB

2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixed unknown package ARRAY... and locales selection
	according to langs.

2001/02/07  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): better fix for getting
	max install size.
	(choosePackages): call setSelectedFromCompssList with empty
	compssUsersChoice meaning max

	* common.pm (formatXiB): more precise for cases like 1_234_000 -> 1.2GB

2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
	8.0

	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
	hostname+domain

2001/02/07  Pixel  <pixel@mandrakesoft.com>

	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(

	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)

	* install_steps_interactive.pm (miscellaneous): remove asking about
	numlock and hd optimizations,
	deprecates it (aka don't do anything)

	* Xconfigurator.pm (main): don't need isLaptop anymore, use
	detect_devices::hasPCMCIA

	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
	value of memsize
	if given
	(install): save CLEAN_TMP in sysconfig/system
	(get_append, add_append): get or set an append value
	(has_profiles, set_profiles): get or add an entry office for profiles,
	also add prof=Home in
	the default entry

	* any.pm (setupBootloader): take care of profiles and memsize
	(facesnames): only display icons capitalized. This goes along the new
	mandrake_desk where capitalized named faces are the new one. [a-z].*
	icons
	being only kept for compatibility. (in case no capitalized icons
	available
	display everything (compatibility with old mandrake_desk)

	* standalone/draknet, standalone/XFdrake: don't pass isLaptop

	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
	taking care of
	profiles and memsize. Now in any & bootloader
	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
	$o->{miscellaneous} anymore

	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm

	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions

	* install2.pm (@installSteps): remove miscellaneous
	(main): don't remove pcmcia modules anymore (not there anymore), remove
	/sbin/stage1

2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
	8.0

	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
	hostname+domain

2001/02/07  Pixel  <pixel@mandrakesoft.com>

	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(

	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)

	* install_steps_interactive.pm (miscellaneous): remove asking about
	numlock and hd optimizations,
	deprecates it (aka don't do anything)

	* Xconfigurator.pm (main): don't need isLaptop anymore, use
	detect_devices::hasPCMCIA

	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
	value of memsize
	if given
	(install): save CLEAN_TMP in sysconfig/system
	(get_append, add_append): get or set an append value
	(has_profiles, set_profiles): get or add an entry office for profiles,
	also add prof=Home in
	the default entry

	* any.pm (setupBootloader): take care of profiles and memsize
	(facesnames): only display icons capitalized. This goes along the new
	mandrake_desk where capitalized named faces are the new one. [a-z].*
	icons
	being only kept for compatibility. (in case no capitalized icons
	available
	display everything (compatibility with old mandrake_desk)

	* standalone/draknet, standalone/XFdrake: don't pass isLaptop

	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
	taking care of
	profiles and memsize. Now in any & bootloader
	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
	$o->{miscellaneous} anymore

	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm

	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions

	* install2.pm (@installSteps): remove miscellaneous
	(main): don't remove pcmcia modules anymore (not there anymore), remove
	/sbin/stage1

2001/02/07  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* share/rpmsrate: Add usbd to SYSTEM.

2001/02/07  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: updated wizard mode, intro and other stuff

	* interactive_gtk.pm, interactive.pm, my_gtk.pm: updated wizard mode

	* share/logo-mandrake.xpm: new logo

2001/02/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* http.pm, ftp.pm, pkgs.pm: now fully fixed ftp connection (and http too)
	caused by forked DrakX
	with latent ftp connection.

2001/02/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile: tag VERSION as 8.0 since stage2 graphics now show
	8.0

	* mdk-stage1/network.c: don't reverse hostname lookup if dhcp already gave
	hostname+domain

2001/02/07  Pixel  <pixel@mandrakesoft.com>

	* share/logo-mandrake.xpm: xpm files should be xpm, not pngs :-(

	* detect_devices.pm (hasPCMCIA): created (check for /proc/pcmcia)

	* install_steps_interactive.pm (miscellaneous): remove asking about
	numlock and hd optimizations,
	deprecates it (aka don't do anything)

	* Xconfigurator.pm (main): don't need isLaptop anymore, use
	detect_devices::hasPCMCIA

	* bootloader.pm (suggest): read CLEAN_TMP from sysconfig/system, default
	value of memsize
	if given
	(install): save CLEAN_TMP in sysconfig/system
	(get_append, add_append): get or set an append value
	(has_profiles, set_profiles): get or add an entry office for profiles,
	also add prof=Home in
	the default entry

	* any.pm (setupBootloader): take care of profiles and memsize
	(facesnames): only display icons capitalized. This goes along the new
	mandrake_desk where capitalized named faces are the new one. [a-z].*
	icons
	being only kept for compatibility. (in case no capitalized icons
	available
	display everything (compatibility with old mandrake_desk)

	* standalone/draknet, standalone/XFdrake: don't pass isLaptop

	* install_steps.pm (setupBootloaderBefore, miscellaneousBefore): remove
	taking care of
	profiles and memsize. Now in any & bootloader
	(miscellaneousBefore): CLEAN_TMP is now in $o->{bootloader}, not in
	$o->{miscellaneous} anymore

	* install_gtk.pm (create_help_window, create_logo_window): use gtkxpm

	* netconnect.pm: remove the $isLaptop unused from a hell lot of functions

	* install2.pm (@installSteps): remove miscellaneous
	(main): don't remove pcmcia modules anymore (not there anymore), remove
	/sbin/stage1

2001/02/07  siegel

	* share/po/de.po: new german version

2001/02/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* ftp.pm: reworked ftp behaviour a bit for cooperative connection (avoid
	opening
	and closing connection too fast for each transaction). There seems
	to be some problem for retrieving twice a package, this cause huge pause
	between each transaction, the best is to avoid them so ?

2001/02/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/stage1.c,
	mdk-stage1/init.c, mdk-stage1/newt-frontend.c, mdk-stage1/network.c,
	mdk-stage1/modules.c, mdk-stage1/disk.c: 
	  - slighty change the message when exiting successfully from install,
	to not mess with abnormal termination
	  - get back dialog for hostname and domain in case of unable to guess
	domain
	  - try to resolve DNS if self-ip can't resolve, to guess domain
	  - remember entries so that when there is a problem you don't have to
	re-enter everything (ncurses sucking stuff in case of stdio-frontend..)
	  - use larger buffer for list_directory since in /dev there can be
	*many* files

2001/02/05  dam's  <damien@mandrakesoft.com>

	* Makefile.drakxtools, Makefile: added wizard.rc handling in Makfiles.

	* standalone/draknet: added infos recovering.

	* netconnect.pm: added load_conf() to recover saved infos from conffile.

2001/02/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: removed abusive white char.
	updated to use urpmi new format (change fakemedium to better label)
	fixed frame buffer usage if not enabled (installation of Aurora)
	clean up and remove unused code.

	* ftp.pm: rebuild URLPREFIX as stage1 does not provide it anymore.

	* pkgs.pm: updated to use urpmi new format (change fakemedium to better
	label)

	* Xconfigurator.pm: Removed Device3Dfx as it is no more.

	* install_steps.pm: fixed frame buffer usage if not enabled (installation
	of Aurora)
	clean up and remove unused code.

2001/02/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/list: updated list of gconv modules

2001/02/05  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (head_tail): fix usage

	* interactive_gtk.pm (create_ctree): node_moveto done only if
	node_is_visible is not full

2001/02/04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/mar/mar-frontend.c: fix bug when creating marfiles with
	file-not-found in args

2001/02/04  Pixel  <pixel@mandrakesoft.com>

	* interactive_newt.pm: fix adaptation to the terminal size, should now
	work in 80x25

	* Xconfigurator.pm (monitorConfiguration): better handling of auto_install

	* install_steps_interactive.pm (choosePackages): don't call
	chooseSizeToInstall even with experts

	* install_steps_gtk.pm (charsetChanged): re-create steps window

2001/02/03  dam's  <damien@mandrakesoft.com>

	* modules.pm, standalone/draknet, netconnect.pm: corrected module.conf
	update, net conf saving, and no wizard by default.

2001/02/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2001/02/03  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
	auto_installs

	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
	the right charset the windows

	* install_steps_interactive.pm (selectLanguage): call charsetChanged

	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
	move ftp to SYSTEM so that it is installed

	* Makefile: install cardmgr

	* modules.pm (configure_pcmcia): cleanup

2001/02/03  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): ease use of {X}{type} in
	auto_installs

	* install_steps_gtk.pm (charsetChanged): created, takes care of setting to
	the right charset the windows

	* install_steps_interactive.pm (selectLanguage): call charsetChanged

	* share/rpmsrate: fix ``LOCALES "zh_CN"'' with ``LOCALES"zh_CN"''
	move ftp to SYSTEM so that it is installed

	* Makefile: install cardmgr

	* modules.pm (configure_pcmcia): cleanup

2001/02/02  dam's  <damien@mandrakesoft.com>

	* share/wizard.rc: added rc file for wizard mode

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
	fails and
	auto_install and not provided any info about the monitor

	* my_gtk.pm (gtkcreate_xpm): error handling with error message

	* share/rpmsrate: all GNOME and KDE moved out of GRAPHICAL_DESKTOP

	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
	/etc/sysconfig/i18n

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

	* install_any.pm (setPackages): in auto_installs, default to all groups
	chosen, unless
	compssUsersChoice exist. Won't change anything unless compssListLevel is
	used of course

	* Xconfigurator_consts.pm: add low_default_monitor for default of
	auto_installs

	* interactive_gtk.pm (ask_from_entries_refW): use gtkxpm

	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
	diskdrake.pm: using the new formatXiB

	* detect_devices.pm (getCompaqSmartArray): adapted getCompaqSmartArray to
	the fact that kernel
	2.4 uses /proc/driver/array instead of /proc/array. Also adapted the
	regexp now that ida/c0d0p? is no more at the beginning of the line.
	(get): cleanup, remove hasIDE hasSCSI...

	* common.pm (formatXiB): created, format a number in human readable format

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

2001/02/02  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm,
	standalone/diskdrake: recoded wizard mode
	corrected some stuff.
	trying not to break draknet for cooker snapshot

2001/02/02  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): better default for DDC probe
	fails and
	auto_install and not provided any info about the monitor

	* install_any.pm (setPackages): in auto_installs, default to all groups
	chosen, unless
	compssUsersChoice exist. Won't change anything unless compssListLevel is
	used of course

	* share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i
	chose was glibc-2.1 :-(
	this one en_US and seems all right!

	* Xconfigurator_consts.pm: add low_default_monitor for default of
	auto_installs

	* Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm,
	diskdrake.pm: using the new formatXiB

	* install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in
	/etc/sysconfig/i18n

	* common.pm (formatXiB): created, format a number in human readable format

	* mdk-stage1/disk.c (try_with_device): bloody guillaume changed
	/tmp/hdimage to /tmp/disk without even
	telling, changing it back as i don't see any good reason for the move.

2001/02/01  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: new draknet snapshot. Still unuseable

	* interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in
	install.

2001/01/31  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: corected translation and conflict.

2001/01/31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* modules.pm: added missing die if modprobe failed on live upgrade.

	* pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm
	file
	if everything has been successfull.

	* install_steps.pm: changed to clean selection for non expert as used for
	group selection
	because it is not cleaned, need better solution TODO.

2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES
	BEFORE COLON (:);
	and it is "Profile" and not "Profil")
	CV:
	----------------------------------------------------------------------

2001/01/31  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackagesTree): created, simple
	ask_many_from_list to choose
	individual packages
	(choosePackages): log for debug
	(choosePackages): don't ask to install in beginner. Max is chosen
	(setRootPassword): help not based on installClass being server or not
	(selectInstallClass): remove installClass choice (was
	normal/devel/server)
	(chooseGroups): fix for individual package selection flag

	* netconnect.pm (get_net_device): more cleanup syntax
	(get_net_device): cleanup syntax

	* install_steps.pm (selectLanguage): warning for debug
	(miscellaneousBefore): don't use installClass to decide to use
	supermount
	or not. Choice is done on $::corporate. Can't say "no supermount in
	server
	installs" anymore
	(selectInstallClass): emptied
	(setupSCSI): don't configure PCMCIA if there is no PCMCIA

	* install_any.pm (g_auto_install): installClass removed
	(setPackages): do not preselect compssUsers entries

	* install2.pm (main): don't set installClass=normal meta_class desktop
	(deprecated)
	(miscellaneous): TYPE= removed (was installClass)
	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
	ask in a set of possibilities
	($o): replace fclass by fbeginner and fexpert
	($o): default security level to 2 since it can't be based on
	installClass (deprecated)

	* install_steps_gtk.pm: restore window size for time being

	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate

	* Xconfigurator.pm (main): better error message for auto_install failing

	* interactive.pm (ask_many_from_list): fix sorting

	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
	drakx. Still
	need finding the guilty

2001/01/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: more kbd corrections
	fixed soem keybopard values

2001/01/31  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackagesTree): created, simple
	ask_many_from_list to choose
	individual packages
	(choosePackages): log for debug
	(choosePackages): don't ask to install in beginner. Max is chosen
	(setRootPassword): help not based on installClass being server or not
	(selectInstallClass): remove installClass choice (was
	normal/devel/server)
	(chooseGroups): fix for individual package selection flag

	* install_steps.pm (selectLanguage): warning for debug
	(miscellaneousBefore): don't use installClass to decide to use
	supermount
	or not. Choice is done on $::corporate. Can't say "no supermount in
	server
	installs" anymore
	(selectInstallClass): emptied
	(setupSCSI): don't configure PCMCIA if there is no PCMCIA

	* install_any.pm (g_auto_install): installClass removed
	(setPackages): do not preselect compssUsers entries

	* install2.pm (main): don't set installClass=normal meta_class desktop
	(deprecated)
	(miscellaneous): TYPE= removed (was installClass)
	(selectInstallClass): don't set $o->{partitions}. diskdrake will have to
	ask in a set of possibilities
	($o): replace fclass by fbeginner and fexpert
	($o): default security level to 2 since it can't be based on
	installClass (deprecated)

	* install_steps_gtk.pm: restore window size for time being

	* pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate

	* Xconfigurator.pm (main): better error message for auto_install failing

	* interactive.pm (ask_many_from_list): fix sorting

	* any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by
	drakx. Still
	need finding the guilty

2001/01/30  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: new draknet. unstable

	* netconnect.pm: updated
	debugged network card configuration after pixelisation.

2001/01/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from
	trying to set progressbar to more than 100% (rescue is more compressed
	than drakx)

	* share/rpmsrate: add ldetect to config stuff I want to have on all
	installs (lspcidrake)

2001/01/30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm, netconnect.pm, install_interactive.pm:
	adapt format functions given to ask_from_listf. $_ is no more set

	* mouse.pm (detect): replace commands::modprobe by modules::load as it
	should (or??)

	* perl2etags: adapt to new etags (emacs 21) format

	* raid.pm (make): replace commands::modprobe by modules::load as it should
	(or??)

	* perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his
	regexps

	* share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number
	separator instead of ".".
	The sheer result is:
	"0.6" * 10  gives 0
	"0,6" * 10  gives 6
	
	So i have overwritten misc/LC_NUMERIC with
	/usr/share/locale/en/LC_NUMERIC and
	it works nicely now :)

2001/01/29  dam's  <damien@mandrakesoft.com>

	* standalone/drakboot: corrected typo

2001/01/29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: 
	  - deprecate "hdreiser.img" since we have room for "reiserfs.o" in
	"hd.img"
	  - following deprecation of "other.img", reintegrate big modules in
	relevant boot disks

2001/01/29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/po/et.po: updated Estonian file

2001/01/29  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain
	more than one ida/c0d0p*

2001/01/28  dam's  <damien@mandrakesoft.com>

	* share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible
	bug causing reiserfs partitions
	not to be displayed/asked for formatting. The default value being used.

	* any.pm (get_autologin): adapt to new format of sysconfig/desktop

2001/01/28  siegel

	* share/po/de.po: new german version

2001/01/26  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: updated embedded mode

	* standalone/drakboot: added embedded mode

2001/01/26  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile
	bzlib

	* mdk-stage1/stage1.c: restore passing of pcmcia info to stage2

	* mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c,
	mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c,
	mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c,
	mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile,
	mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c,
	mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: 
	  - use bzlib instead of zlib to reduce overall size
	  - take home my own bzlib code to (1) reduce code size with good
	compile options (2) make it compile and link against dietlibc

	* mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h,
	mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h,
	mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib

	* mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/26  siegel

	* share/po/de.po: .

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (installPackages): prepare for advertising...

	* interactive_newt.pm (ask_from_entries_refW): major rework for new
	format, still need work
	(ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of
	NEWT_FLAG_HIDDEN
	(myTextbox): wrap the text if needed
	(myTextbox): use a vertical scrollbar if needed

	* Newt/Newt.xs (newtFormAddGrid): new name for
	newtGridAddComponentsToForm, swap
	parameters for much better understanding
	(newtListboxGetCurrent): returns a SV (together with
	newtListboxAddEntry)
	(newtListboxAddEntry): data is now a SV

2001/01/25  dam's  <damien@mandrakesoft.com>

	* install2.pm: disable steps 'packages choice', 'configure X', and
	'configure' 'printer'

	* install_steps_interactive.pm: don't oblige user addition

	* network.pm: display ethernet module

	* netconnect.pm: network informations filled into
	$prefix/var/lib/naat/configuration

2001/01/25  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh ->
	/usr/bin/sh for stage2

	* mdk-stage1/probing.h: better tightness of probing stuff

	* mdk-stage1/probing.c: better tightness of probing stuff
	print warning message when insmod of PCI-detected device fails

	* mdk-stage1/stage1.c: 
	  - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives
	  - remove fat/vfat modules from some boot floppies now that we don't
	need it anymore

	* mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of
	tulip network cards, kernel-2.4 has strange way to classify some of its
	net modules..

2001/01/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: Waw, italian translator is very fast :)
	updated Indonesian and Italian fiels

	* share/po/id.po: updated Indonesian and Italian fiels

	* share/locales.tar.bz2: added iso9 locale definitions

	* lang.pm: fixed LANGUAGE for mk locale

2001/01/25  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (spawnShell): fix error message

2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: 
	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
	  - remove unecessary device files

	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia

2001/01/24  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun

	* install_steps.pm (afterInstallPackages): cleanup

	* interactive.pm: better documentation of ask_from_entries_refH features
	(entry)

2001/01/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1-data/stage1.tar.bz2: 
	  - clean up deprecated symlinks (insmod, rmmod, cardmgr)
	  - remove unecessary device files

	* mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c,
	mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h,
	mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h,
	mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h,
	mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h,
	mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c,
	mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h,
	mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h,
	mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h,
	mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile,
	mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h,
	mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia

2001/01/24  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun

	* install_steps.pm (afterInstallPackages): cleanup

	* interactive.pm: better documentation of ask_from_entries_refH features
	(entry)

2001/01/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file

2001/01/22  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm, netconnect.pm: corrected slide bar, and
	added network conf save in /root/networking.tmp

2001/01/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/network.c: add automatic support in choice of NET device, in
	case of multiple NET devices
	consistent dot-terminated error messages, consistent no-dot log messages
	re-put Netmask input per default (void entry -> automatic guess)

	* mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent
	dot-terminated error messages, consistent no-dot log messages

2001/01/22  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/id.po: updated Indonesian file

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po,
	share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po,
	share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated po files

	* share/po/wa.po: updated po files
	updated pot file

	* install2.pm, lang.pm: fixed the places where console fonts and related
	files are put under
	/etc/sysconfig to the places really used by console-tools

	* share/po/DrakX.pot: updated pot file

	* share/po/hr.po: updated po files
	updated Croatian file

2001/01/22  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way,
	read_rpmsrate
	can be called standalone.

	* network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm,
	install_interactive.pm, install2.pm, partition_table.pm, install_any.pm,
	any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is
	deprecated, replaced by !$::expert

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
	network/ftp installs

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (create_ctree): fix case with formatted list

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's

	* mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in
	network/ftp installs

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (create_ctree): fix case with formatted list

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's

2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files

2001/01/21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/nfsmount.c: fix remaining perror's

	* mdk-stage1/stage1.c: fix remaining perror's
	  - better msg in fatal errors
	  - do not include code to spawn a shell for releases

2001/01/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files

2001/01/21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectMouse): use ask_from_treelist_

	* interactive.pm (ask_from_treelist_): created, split with the separator,
	call translate on
	words, then re-join.

2001/01/19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: fixes for CD not changeable.

	* install_steps_interactive.pm: fixed unselect group and inoperant
	individual package selection.
	removed expert mode and install class.

2001/01/18  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: fixed obligation of relative large install, now
	minimum is lesser.

	* install_steps_gtk.pm: make sure no ratio above 1 can occur, still need
	to see why as it happens
	on install-abort-choices-install or
	install-abort-choices-fs-format(none)-choices-install

	* live_install: update live install to match /tmp/image instead of
	/tmp/rhimage.

2001/01/17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, install_any.pm: fixes with /tmp/rhimage and
	/tmp/image.

	* pkgs.pm: update to use new header file format in hdlist (added arch) but
	depslist has not it...

	* install2.pm: fixes with /tmp/rhimage and /tmp/image

2001/01/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/bg.po: updated bulgarian file

2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/url.c: use strrchr instead of doing it by hand

	* mdk-stage1/insmod-busybox/busybox.h,
	mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c:
	
	  - replace remaining perror's with log_perror's
	  - little code cleanup

	* mdk-stage1/stage1-data/stage1.tar.bz2,
	mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0

	* mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c,
	mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: 
	  - add load of third party modules in Expert mode (PS rulz)

2001/01/12  siegel

	* share/po/de.po: updates

2001/01/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed addUser for invocation of
	any::ask_users.
	fixed bad invocation of installation of X server.

2001/01/12  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/cdrom.c: add more memory carefulness with CDROM install
	  - add wait_message for initializing of CDROM's (it can be long when
	it's SCSI)
	  - print CDROM drive names (model) in dialogs

	* mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: 
	  - fix behaviour with bad ISO images (DISK installs)
	  - better dialogs for DISK installs

2001/01/12  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: make lang list in format for tree-selector

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/disk.c: fix failing umount for DISK installs in some failing
	loopback situations
	act nicely when no partitions are found on some disk

	* mdk-stage1/modules.h: polish generic blank.img situation (no modules
	and/or modules.dep available)

	* mdk-stage1/lomount.c: fix failing umount for DISK installs in some
	failing loopback situations
	better log messages
	continue anyway when insmod'ing of modules fail (for blank.img)

	* mdk-stage1/probing.c: close some fd's

	* mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img
	situation (no modules and/or modules.dep available)
	continue anyway when insmod'ing of modules fail (for blank.img)

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/Makefile, mdk-stage1/disk.c: 
	  - add DISK install from ISO image file
	  - add FTP
	  - add HTTP
	  - use single place for mountpoints and static directories

	* mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: 
	  - add DISK install from ISO image file

	* mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h,
	mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c,
	mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: 
	  - add FTP
	  - add HTTP
	  - use single place for mountpoints and static directories

	* mdk-stage1/insmod-busybox/Config.h: tweak config

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* standalone/adduserdrake: adduserdrake may handles autologin

	* install_steps.pm (addUser): set autologin

	* install2.pm (addUser): moved setAuthentication to install_steps::addUser

	* install_steps_interactive.pm (addUser): fix

2001/01/11  dam's  <damien@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm, ChangeLog,
	netconnect.pm: updated

2001/01/11  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when
	mar or marfiles not available to perform consistency check

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* interactive_gtk.pm (create_ctree): fix default value selecting failing
	(in case of "format")
	(ask_from_entries_refW): apply "format" on label when icon is missing
	for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
	icon is missing for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at
	the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake
	and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/11  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (autologin): moved to package any

	* interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when
	icon is missing for iconlist
	(ask_from_entries_refW): handle "canceled" callback. Permits to overrule
	the cancel.

	* install_steps.pm (configureX): call directly $o->pkg_install, no need to
	add 'XFree86-' at
	the beginning
	(addUser): use any::write_passwd_user
	(setRootPassword): use any::write_passwd_user
	(configureX): fix bad $install given to Xconfigurator::main

	* any.pm (write_passwd_user): add or update an entry in /etc/passwd
	(ask_users): created, interactively ask users to add (used in
	adduserdrake
	and install)
	(allocUsers, addUsers): changed the prototype
	(setupBootloader): grep out fat partitions for the "Boot device"
	propositions (people are too stupid)

	* my_gtk.pm (main): third argument is a function to call before leaving in
	case of
	"cancel" clicked.

	* install_any.pm (g_auto_install): deep copy of $o->{users} because we're
	modifying it

	* Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated)

	* install_steps_interactive.pm (addUser): use any::ask_users

	* standalone/adduserdrake: use any::ask_users

	* Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in
	install2::main)

	* install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos
	here

	* interactive.pm (ask_from_entries_refH_powered_normalize): "canceled"
	callback defaults
	to "sub { 0 }"

2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal
	size

	* mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c:
	remove warnings from compile

2001/01/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
	callback on clist/list/ctree

	* install_steps.pm (addUser): use any::pack_passwd
	(setRootPassword): use any::unpack_passwd and any::pack_passwd

	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
	generic
	(autologin): use $install which is now generic

	* install_steps_interactive.pm (selectLanguage): many_languages choice
	moved there as advanced

	* my_gtk.pm (create_packtable): yet another try to have something nice :)
	!! uses Gtk::Table::attach_raw which is available in
	perl-GTK-0.7004-6mdk !!
	(create_box_with_title): with the size given to set_usize for the scroll
	containing the text widget in case of long text. and don't let the
	scroll
	grow.
	(gtktext_insert): remove adding an ending "\n" (no more needed?)

	* any.pm (setAutologin): cleanup
	(pack_passwd, unpack_passwd): created

2001/01/10  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm: corrected last message . firewall

2001/01/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm,
	parport*, plip)

2001/01/10  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed'
	callback on clist/list/ctree

	* install_steps.pm (addUser): use any::pack_passwd
	(setRootPassword): use any::unpack_passwd and any::pack_passwd

	* my_gtk.pm (create_packtable): yet another try to have something nice :)
	!! uses Gtk::Table::attach_raw which is available in
	perl-GTK-0.7004-6mdk !!
	(create_box_with_title): with the size given to set_usize for the scroll
	containing the text widget in case of long text. and don't let the
	scroll
	grow.
	(gtktext_insert): remove adding an ending "\n" (no more needed?)

	* any.pm (setAutologin): cleanup
	(pack_passwd, unpack_passwd): created

	* Xconfigurator.pm (cardConfiguration): adapt for $install which is
	generic
	(autologin): use $install which is now generic

	* install_steps_interactive.pm (selectLanguage): many_languages choice
	moved there as advanced

	* standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2,
	standalone/livedrake, standalone/drakboot, standalone/draksec,
	standalone/netdrake, standalone/mousedrake, standalone/drakgw,
	standalone/drakxservices, standalone.pm, standalone/draknet,
	standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake,
	standalone/drakxconf: use standalone and standalone::pkgs_install

2001/01/09  Pixel  <pixel@mandrakesoft.com>

	* any.pm (drakx_version): nicer (4gc)

	* install2.pm (main): log::l the drakx_version

	* my_gtk.pm (create_packtable): no_expand option added

	* interactive.pm (ask_from_entries_refH_powered_normalize): field
	"disabled" added,
	"advanced_messages" added

	* lang.pm (langs): created (transform the $o->{langs} hash ref in a list)
	(pack_langs): use lang::langs

	* install_steps.pm (selectLanguage): $o->{langs} is now a ref so
	initialize as such

	* Makefile (get_needed_files): generate /usr/share/VERSION which contains
	the version
	of ChangeLog (which is updated at each upload)

	* install_steps_interactive.pm (choosePartitionsToFormat): handle "check
	for bad blocks" as advanced
	(setRootPassword): remove choosing non-md5 or non-shadow passwords.

	* install_any.pm (setPackages): use lang::langs instead of using
	$o->{langs} as a array ref (it is not so anymore)
	(spawnShell): print the drakx_version

2001/01/08  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm: fixes
	(ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH
	(ask_from_entries_refH_powered): remove "1;" (was there for debugging)

	* interactive_gtk.pm: fixes
	(ask_from_treelistW): removed
	(create_ctree): created, used for ``type => treelist'' entries

	* my_gtk.pm: fixes

	* ChangeLog: New snapshot uploaded

2001/01/07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated
	Czech, Norwegian and Serbian files

2001/01/07  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm: update code for new ask_from_entries_refH
	which doesn't handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered
	(selectLanguage, selectKeyboard): use ask_from_entries_refH instead of
	ask_from_listf_, it enables the use of advanced

	* any.pm, printerdrake.pm: update code for new ask_from_entries_refH which
	doesn't handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered

	* interactive.pm: update code for new ask_from_entries_refH which doesn't
	handle optional ok/cancel names in arg 1.
	must be handled via ask_from_entries_refH_powered
	(ask_from_listf_no_check): replaces ask_from_list_no_check
	(ask_from_entries_refH_powered): sorts the list if needed or wanted

	* partition_table_raw.pm (test_for_bad_drives): created
	- ugly stuff needed mainly for Western Digital IDE drives
	- try writing what we've just read, yells if it fails
	- testing on last sector of head #0 (unused in 99% cases)

	* ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an
	non-existent
	file, stressing the ftp server :-/ )
	for the moment, just release cdrom.img, hd.img and hdreiser.img
	others should should come...

	* install_steps.pm: for the moment, just release cdrom.img, hd.img and
	hdreiser.img
	others should should come...

	* interactive_gtk.pm (ask_from_listW): removed
	(create_list): calls "format" on list elems before prompting them
	(create_clist): created
	(ask_from_entries_refW): calls create_clist in case of list with no help

	* install_steps_gtk.pm (installPackages): autoflush stdout before beeping
	(installPackages): don't take into account the time when prompting the
	user

	* common.pm (may_apply): added

	* install_any.pm (getHds): test_for_bad_drives called on hard drives
	(getHds): ensure $o->{hds} is not set until the hard drives are checked

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* ChangeLog: New snapshot uploaded
	New snapshot uploaded

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* ChangeLog: New snapshot uploaded

2001/01/06  Pixel  <pixel@mandrakesoft.com>

	* keyboard.pm (setup): don't xmodmap if DISPLAY is unset

	* standalone/rpmdrake: deprecated (and has been for a long time now)

	* network.pm, install_steps_interactive.pm, netconnect.pm,
	install_interactive.pm, standalone/adduserdrake, any.pm,
	Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm:
	ask_from_entries_refH parameter format has changed so change all
	accesses to it.

2001/01/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* lang.pm, keyboard.pm: forget _exit in child process after a fork of
	DrakX
	removed need of packdrake binary

	* Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames

	* live_install2: cleanup to keep libperl.so but the right one

	* live_install: no more copy of files on live system, now use environment
	variable by DrakX cleanup

	* perl2fcalls: added packdrake call (via new but incomplete) and package

	* install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary

	* netconnect.pm: fixed syntax error

	* modules.pm: eval insmoding ide-cd (just in case)
	removed need of packdrake binary

2001/01/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan
	and Japanese files

2001/01/05  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm: help cperl-mode

	* interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm,
	interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to
	new ask_from's:
	- ask_from_entries_ref is deprecated, use ask_from_entries_refH
	- ask_from_list now calls ask_from_entries_refH_powered
	still not done:
	- ask_from_treelist should use ask_from_entries_refH_powered,
	and lists with no help should use CList (List is bad)
	- keyboard and mouse binding is still rough
	- enhance the look

	* keyboard.pm: add the percentage of each keyboard types (as a comment for
	now)

2001/01/04  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: cleaned... everything should be buggy.

2001/01/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed some old $p->{file} by new $p->[$FILE]
	code cleanup and fixes for lilo not upgrade

2001/01/04  Pablo Saratxaga <pablo@mandrakesoft.com>

	* install_any.pm: fixed the functions doing the lists of languages

	* lang.pm: fixed the functions doing the lists of languages
	The list of languages now has complete locale names insted of just
	language
	code (that is needed to differentiate zh_CN and zh_TW among others)

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file

	* share/po/eu.po: updated Basque file
	updated Brazilian file

2001/01/04  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: some pixelization using the new if_

	* install_steps_interactive.pm (setRootPassword): fix pixelization
	keep $o->{langs} unpacked to simplify things
	if_ pixelization

	* common.pm (%EXPORT_TAGS): add if_ in "common" exported tags
	(if_): created. Use it to replace things like
	($::expert ? $val : ()) by if_($::expert, $val)

	* keyboard.pm: nl keyboard is not used, so defaults to us_intl

	* lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs}
	unpacked to simplify things

	* netconnect.pm: quite a few clean-up (and buggying)

2001/01/03  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm: admin user removed before beeing added

	* netconnect.pm: corrected typo
	LAN is configured with default value if firewall

2001/01/03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed invocation of change_type by clicking on legend
	unless expert

	* install2.pm: fixed usage with testing

	* install_steps.pm: fixed some other services to start in case something
	gets wrong,
	this fixes some deadlock on upgrade from 7.0.
	fixed usage with testing

	* partition_table.pm: fixed overlapping partitions between one extended
	and one regular primary.
	should be accepted (log printed instead of error) as diskdrake allow
	their
	creation in expert.

2001/01/03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: add checks of dependencies on marfiles
	fix a couple of broken dependencies in modules.pm

2001/01/03  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format

2001/01/03  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the setting of PATH and spawnShell *after*
	setting $prefix

2000/12/31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/rpmsrate: added a few locales dependences

2000/12/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (addUser): typo fix

	* ChangeLog: New snapshot uploaded

	* ftp.pm (getFile): recall getFile after rewindGetFile

2000/12/29  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (addUser): typo fix

	* ftp.pm (getFile): recall getFile after rewindGetFile

2000/12/28  Pixel  <pixel@mandrakesoft.com>

	* Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and
	jako

2000/12/26  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* keyboard.pm: Add the very ghost option REMOVE_MOD_META_L.

2000/12/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated Lithuanian file

2000/12/22  dam's  <damien@mandrakesoft.com>

	* install_steps.pm, install_steps_interactive.pm: corrected admin user
	setting for firewall install.

2000/12/22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* modules.pm: fixed load_multi on live.
	added back all removed module with the new great mdk-stage1 of g�g�.

2000/12/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* modules.pm: make them work with kernel-2.4 by disabling non existent
	modules

2000/12/22  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage

2000/12/21  Pixel  <pixel@mandrakesoft.com>

	* ChangeLog: New snapshot uploaded

2000/12/21  dam's  <damien@mandrakesoft.com>

	* install2.pm: firewall : automatic class set when firewall (beginner=0)

	* install_steps_interactive.pm: if firewall, admin password obliged

	* install_steps.pm: added setAdminpassword (a little bit redundant, sorry)

	* any.pm: corrected module stuff.. Thanx to pixel

2000/12/20  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): unsure the device exists

	* unused/christmas-karaoke.patch: handle isa cards

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* ChangeLog: New snapshot uploaded
	New snapshot uploaded

2000/12/19  dam's  <damien@mandrakesoft.com>

	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
	standalone/pixmaps/draknet3.xpm: added control-center.

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss

	* unused/christmas-karaoke.patch: Happy Christmas :)

	* install_any.pm: spawnShell: set DISPLAY, just in case :)

	* install2.pm: set PATH before doing spawnShell

	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)

	* ChangeLog: New snapshot uploaded

2000/12/18  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: added embedded support for control-center
	corrected embedded support.
	new control center and related

	* netconnect.pm: corrected typo
	corrected typo

	* standalone/drakxservices, standalone/control-center, ChangeLog,
	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
	standalone/drakboot: new control center and related

	* install_gtk.pm: added firewall support

	* install2.pm: included firewall handling
	changed firewall comportement

	* install_steps_interactive.pm: changed firewall comportement

	* modules.pm: corrected bad mergeinconf

2000/12/18  Pixel  <pixel@mandrakesoft.com>

	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
	cfI/xfI
	remove isdndb.net

2000/12/19  dam's  <damien@mandrakesoft.com>

	* standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm,
	standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm,
	standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm,
	standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm,
	standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm,
	standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm,
	standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm,
	standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm,
	standalone/pixmaps/draknet3.xpm: added control-center.

2000/12/19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: when loading /snd-card-/ module, load snd-pcm-oss

	* unused/christmas-karaoke.patch: Happy Christmas :)

	* install_any.pm: spawnShell: set DISPLAY, just in case :)

	* install2.pm: set PATH before doing spawnShell

	* Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc)

2000/12/18  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm: added embedded support for control-center
	corrected embedded support.
	new control center and related

	* netconnect.pm: corrected typo
	corrected typo

	* standalone/drakxservices, standalone/control-center, ChangeLog,
	standalone/XFdrake, standalone/draknet2, standalone/adduserdrake,
	standalone/drakboot: new control center and related

	* install_gtk.pm: added firewall support

	* install2.pm: included firewall handling
	changed firewall comportement

	* install_steps_interactive.pm: changed firewall comportement

	* modules.pm: corrected bad mergeinconf

2000/12/18  Pixel  <pixel@mandrakesoft.com>

	* Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more
	cfI/xfI
	remove isdndb.net

2000/12/16  Pixel  <pixel@mandrakesoft.com>

	* standalone/mousedrake, standalone/drakgw: use ldetect-lst

	* Makefile.drakxtools: fix daminetsex
	use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* share/list: use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* any.pm: fix daminetsex

	* modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm,
	mouse.pm: use ldetect-lst for usb => now auto detects mice types :)

	* c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto
	detects mice types :)
	use ldetect-lst
	pci_probing now done by libldetect
	config files moved in package ldetect-lst

	* Makefile.config: fix daminetsex
	use ldetect-lst

	* Makefile: use ldetect-lst for usb => now auto detects mice types :)
	use ldetect-lst

	* netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm,
	Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net,
	share/Cards2CardsNames: pci_probing now done by libldetect
	config files moved in package ldetect-lst

2000/12/15  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst

	* install_steps.pm: clean all unneeded stuff

2000/12/14  dam's  <damien@mandrakesoft.com>

	* any_new.pm, netconnect_new.pm: preparing for big jump.

	* netconnect.pm: Big jump. The *_new.pm are replaced by *.pm
	Everything should work, but you better test :)

	* standalone/control-center: big improvement and cosmetic changes
	a lot of improvement. Is able to launch multiples soft passing in
	arguments.
	new file. Its location should change soon.

	* any.pm: Big jump. The *_new.pm are replaced by *.pm
	Everything should work, but you better test :)
	corrected typo.

2000/12/14  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: obsoleted by rpmsrate

	* share/rpmsrate: obsoletes compssList

	* share/compssUsers, install_steps.pm, install_steps_interactive.pm,
	Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm:
	move from compssList to rpmsrate

	* Newt/Newt.xs: cleanup (use of alloca to pass parameters)

2000/12/13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/it.po: updated Italian file

2000/12/12  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: typo + if firewall, don't display 'disable network'

	* standalone/draknet2: new version... still working on it

	* ChangeLog: commit

	* share/themes-mdk-Firewall.rc: added firewall theme

	* modules.pm: my fault, corrected renaud's patch incorporation

	* share/logo-mandrake-Firewall.xpm: new logo

2000/12/12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/list: added packdrake.pm as packdrake has been splited.

	* pkgs.pm: fixed versionCompare to always return number. added checking of
	version to
	select obsoletes on upgrade.

2000/12/11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: Radeon uses 3D now.

	* lang.pm: fixed write_langs for upgrade.
	i18n sucking fixes.

	* Xconfigurator.pm: Radeon uses 3D hw accel theoritically now.

2000/12/09  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: Added configuration of Vietnamese input server

2000/12/09  Pixel  <pixel@mandrakesoft.com>

	* standalone/adduserdrake: remove debugging code

	* install2.pm (selectInstallClass): give $clicked to selectInstallClass

	* interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to
	null in case of error
	on hidden entry cuz newt doesn't display null entries, disturbing

	* install_steps_interactive.pm (formatMountPartitions): the format
	partition dialog created at first use,
	so that it doesn't appear if no partitions are formatted.
	(selectInstallClass): ensure expert choice is kept if it was prechosen
	(selectInstallClass): if expert pre-chosen, ensure expert is kept

	* interactive_gtk.pm, install_steps.pm: small renicing

2000/12/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed bug in list of packages provided by another one.

2000/12/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po,
	share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po,
	share/po/az.po, share/po/tr.po: updated Brazilian file

2000/12/08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): warn if VERSION file doesn't exist
	(formatPartitions): call rotate_logs after mounting the partitions

	* mouse.pm (write_conf): fix to make make test_pms happy

	* install_steps.pm (exitInstall): save the report.bug in /root/report.bug

	* any.pm (rotate_logs): created, rotates ddebug.log and install.log in
	/root

	* ftp.pm (new): retry in case of ftp connection/login

	* commands.pm: report_bug: created, returns a string

2000/12/07  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: corrected ADSL connection choice.
	corrected typo

2000/12/06  dam's  <damien@mandrakesoft.com>

	* install2.pm: erare humanum es
	firewall begins to infect the install :).
	new meta_class.

	* share/logo-mandrake-Firewall.xpm: aded logo for firewall

	* install_gtk.pm: corrected errors
	left pixmap centered if firewall
	improved the firewall theme.
	errare humanum es
	firewall infects the install.
	The logo is changed if firewall.

2000/12/06  Pixel  <pixel@mandrakesoft.com>

	* standalone/keyboarddrake: add possibility to use keyboarddrake
	non-interactive (aka give the keyboard as
	first parameter)

	* lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm,
	install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted.
	Now rpm uses %_install_langs in /etc/rpm/macros

2000/12/05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: final fixes to versionCompare to make sure no deadlock can
	occurs.

	* Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration.

2000/12/05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po,
	share/po/es.po: updated several pofiles

2000/12/04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: use isCdNotEjectable.

	* common.pm: added function isCdNotEjectable.

	* share/Cards+: SiS620 card are said to be unsupported by XF4.

	* pkgs.pm: load only one hdlist in memory if CD is not ejectable (low
	memory).
	fixed compareVersion for deadlock. removed silly CODE print on deporder
	problems.

	* Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode.

2000/12/03  dam's  <damien@mandrakesoft.com>

	* mouse.pm: incorporated cmodifications in the firewall branch

	* netconnect.pm: netconnect_new > netconnect.pm

	* netconnect_consts.pm: incorporated in the firewall branch.

	* standalone/draknet2: incoporated in the firewall branch

	* any_new.pm: any_new > any, so we remove it now.

	* netconnect_new.pm: netconnect_new > netconnect, so we remove it now.
	incorporated in the firewall branch

	* modules.pm: incorporated modifications to the firewall branch. Hope they
	won't break anything...

2000/12/02  dam's  <damien@mandrakesoft.com>

	* share/po/az.po: correction in firewall incorporated

	* ChangeLog: first attempt ro build the firewall install

	* standalone/mousedrake: incorporated in the firewall branch

	* share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated
	in the firewall branch

2000/11/28  dam's  <damien@mandrakesoft.com>

	* modules.pm: included reno's patches. Now should work without kudzu.
	branch to build the firewall install.

	* standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm,
	standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm,
	standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm,
	standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm,
	standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm,
	standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm,
	standalone/pixmaps/isdn.xpm: Initial revision
	branch to build the firewall install.

	* partition_table_dos.pm, share/po/bg.po, share/po/sr.po,
	share/template.in/cdrom.kdelnk.in,
	share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c,
	Makefile, share/consolefonts/lat0-sun16,
	share/themes/DarkMarble-check_off.png,
	share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc,
	do_resize_fat, share/po/wa.po, share/po/is.po,
	share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm,
	class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm,
	install_interactive.pm, c/README, Xconfig.pm, share/themes.rc,
	share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc,
	share/themes-blueHeart.rc, pkgs.pm, keyboard.pm,
	share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po,
	standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm,
	share/step-green-click.xpm, partition_table_sun.pm,
	share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c,
	share/po/.cvsignore, share/ftin.xpm, standalone/draksec,
	resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm,
	Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm,
	share/themes/marble3d-button4.png, share/rpm-unselected.xpm,
	share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png,
	c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm,
	standalone/livedrake, share/diskdrake.rc,
	share/themes/DarkMarble-check_on.png, standalone/draknet,
	share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png,
	share/po/ro.po, share/list, share/po/cs.po, share/po/be.po,
	share/po/sp.po, share/step-orange-click.xpm, modparm.pm,
	share/step-green.xpm, share/rpm-base.xpm,
	share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po,
	share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm,
	share/Cards2CardsNames, Newt/Makefile.PL,
	share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po,
	share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po,
	standalone/icons/findf.xpm, share/po/lt.po,
	share/themes/mdk-check_off.png, fs.pm, c/.cvsignore,
	share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm,
	detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm,
	standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm,
	Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po,
	share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm,
	share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po,
	resize_fat/.cvsignore, install_steps_interactive.pm,
	share/themes/mdk-button4.png, live_install, standalone/draknet2,
	any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm,
	share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm,
	share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl,
	swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake,
	g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po,
	partition_table_mac.pm, standalone/mousedrake, devices.pm,
	share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po,
	share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm,
	share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po,
	Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc,
	share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c,
	share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm,
	perl2etags, share/po/Changelog, standalone/drakboot,
	resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc,
	share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po,
	share/MonitorsDB, share/template.in/Dos_.kdelnk.in,
	standalone/printerdrake, services.pm, share/kmap2bkmap,
	share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po,
	common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm,
	install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16,
	share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames,
	c/Makefile.PL, share/themes-mdk-Desktop.rc,
	share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm,
	share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw,
	share/po/sl.po, standalone/rpmdrake, share/makedev.sh,
	share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc,
	install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm,
	my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList,
	share/po/fr.po, share/themes/DarkMarble-button3_in.png,
	standalone/icons/ftin.xpm, share/modparm.lst, raid.pm,
	standalone/diskdrake, share/po/ko.po,
	share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop,
	share/po/ja.po, any.pm, share/isdndb.net,
	share/template.in/floppy.kdelnk.in, share/step-green-on.xpm,
	share/step-red-click.xpm, share/po/Makefile, help.pm,
	share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po,
	share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po,
	loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm,
	Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm,
	standalone/drakxservices, resize_fat/Makefile, fsedit.pm,
	interactive_stdio.pm, live_install2, resize_fat/directory.pm,
	share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot,
	share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po,
	share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm,
	share/themes/marble3d-check2.png, ftp.pm, c/md5.h,
	standalone/adduserdrake, share/themes/marble3d-button2.png,
	partition_table_raw.pm, share/template.in/zip.kdelnk.in,
	share/locales.tar.bz2, standalone/icons/fileopen.xpm,
	share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm,
	commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po,
	interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png,
	interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm,
	bootloader.pm, share/po/af.po: branch to build the firewall install.

2000/11/28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: change upgrade section for keyboard.

	* install_steps_gtk.pm: extended chooseSizeToInstall.

	* install_steps.pm: updated comment.

	* pkgs.pm: fixed misuse of map with values returing list which are indexed
	afterward.

	* install_any.pm: removed some more logs.

	* keyboard.pm: keep track of unknown keyboard (for upgrade)

	* install_steps_interactive.pm: modified def_mark to 59 (gl hw
	acceleration level) and upgrade use this level
	for newbies so.
	make sure a recommended upgrade get the minimum and a little more (80).
	choose default size according to a default mark (currently 49).

2000/11/27  dam's  <damien@mandrakesoft.com>

	* netconnect_consts.pm: added isdn Gazel card 10b5 1151

2000/11/27  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (@bad_types): list of the different type of extended
	partitions
	(important_types): remove @bad_types from important_types

2000/11/25  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ru.po: updated Russian file

2000/11/24  dam's  <damien@mandrakesoft.com>

	* mouse.pm: doc + split

	* netconnect_new.pm: added depmod after having writed modules.conf

	* standalone/mousedrake: splited

2000/11/24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: avoid .la files for selection.

	* install_steps.pm: added missing portmap.

2000/11/23  dam's  <damien@mandrakesoft.com>

	* standalone/draknet2: progressbar.

2000/11/23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_gtk.pm: updated with
	structural change of pkgs.

	* install_any.pm: removed some ugly logs.
	updated with structural change of pkgs.

	* install_steps.pm: added tempory fix for initscripts %post.
	updated with structural change of pkgs.

	* pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk.
	removed ugly log on transaction.
	added special case to avoid counting kernels space when upgrading
	as these package are not upgraded (just installed).
	Memory usage optimization, change structure of storing
	package informations. lot of fork to make sure of
	freeing memory by perl (no free on used hashes or arrays
	usable by other than perl), now upgrade takes as much as
	install which takes at least 0.5Mb less than before.

2000/11/23  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: put all tina stuff to weight 0

2000/11/21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files,
	keep
	wacom entries.

	* Xconfigurator.pm: upgrade for XF86Config, take care of resolution and
	depth wanted.

	* install_steps.pm: always try to get default from /etc/X11/XF86Config
	removing logs.

	* pkgs.pm: cosmetic changes for upgrade, removing some logs.

	* install_steps_interactive.pm: removed code to ask if take care of
	/etc/X11/XF86Config* files.
	added wait message during rebuild of rpm database as it takes some time.

	* Xconfigurator_new.pm: WARNING

2000/11/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: updated Azeri file

2000/11/20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: clean up as today filelist is no more.
	use parsehdlist from rpmtools-2.1-3mdk or above instead of
	perl code from DrakX forking to simulate a filelist server.
	this increase performance by 100 to 150% on selection of
	packages to upgrade.

	* share/list: added parsehdlist.

	* c/stuff.xs.pm: removed logs.

2000/11/20  Pixel  <pixel@mandrakesoft.com>

	* share/Cards+: add radeon

	* install_steps_auto_install.pm (exitInstall): fix message

	* install_steps.pm (afterInstallPackages): moved the
	writeandclean_ldsoconf here

	* fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points

2000/11/17  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* install_any.pm: add openuniverse to the list of gl apps

2000/11/16  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: corrected isdn_get_{list, info}

2000/11/16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-)

	* modules.pm: tempory version for current glibc, a lot of module have been
	removed due to
	problem of stage1 increase in size when compiled with glibc-2.2 and
	current
	modutils.

	* c/Makefile.PL: updated with rpmlib 4.

	* c/stuff.xs.pm: completed something that seems to work almost correctly
	at the first look
	with rpmlib 4.

2000/11/16  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: add netscape-german, thx to florin
	isdn4k-utils gets same weight as isdn4net, thx to Florin

2000/11/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po: updated Norwegian file

	* share/po/sk.po: updated Slovak file

2000/11/15  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: added isdn_get_list and isdn_get_info
	calls modules::write_conf to fill the modules.conf.

	* Xconfigurator_new.pm: added to fork frontends backends. Not operationnal
	at all for now.

	* modules.pm: when loading a new module, add an alias for it, even in
	standalone mode.

2000/11/15  Fran�ois Pons  <fpons@mandrakesoft.com>

	* c/stuff.xs.pm: updated for rpm 4.

	* pkgs.pm: rpmdepOrder again (for new TAGp)

2000/11/15  Pixel  <pixel@mandrakesoft.com>

	* c/Makefile.PL: add librpmio

	* c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc
	(dev_t)

2000/11/14  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: better structure for the ethx-driver.
	added call to add_alias and write_conf

	* standalone/draknet2: updated

2000/11/14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: removed foreach (<... which are eating memory
	fork install on upgrade for searching trhough filelist, this saves
	about 20Mb of memory before rpmlib transaction are started so its is
	more than 2 times faster for upgrading a system, sorry it was
	effectively
	a machine two overloaded that makes the upgrade slower.
	make rpmlib not to check size as DrakX should do it.
	added special cases for selection of packages according to files, avoid
	all kde-i18n packages if their locales-$lang is not selected, avoid
	a -devel package if only one files is updated (typical for fixes on
	package by moving files around).
	
	deactivated rpmdepOrder as it should be done directly in
	depslist.ordered
	file.
	
	fixed obsoletes which never run correctly, even if almost no package are
	selected explicitely this way.
	
	added log during selection of packages to upgrade to keep a track of
	what DrakX is doing.

	* modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm,
	Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm,
	printer.pm, Xconfigurator.pm: removed foreach (<... which are eating
	memory

2000/11/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/da.po: updated Danish file

2000/11/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: Integrate Till's patches for better work with Cups.

2000/11/12  Pixel  <pixel@mandrakesoft.com>

	* standalone/mousedrake: fix for bug #1350
	(mousedrake dies with: Undefined subroutine &mouse::serial_ports_names)

	* pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and
	.cz22 for
	.cz2) that makes for than one CD install breaks :-(

2000/11/11  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po,
	share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po,
	share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po,
	share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po,
	share/po/pl.po, share/po/fi.po, share/po/no.po,
	share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po,
	share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po,
	share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

2000/11/10  dam's  <damien@mandrakesoft.com>

	* standalone/draknet2: draknet2 : new version of draknet, post-install
	only, uses only libDrakX backend, beautyfull

	* netconnect_new.pm: completed adsl_conf_backend
	corrected conf_network_card_backend : return interface and module
	separately
	splitted pppconfig.

2000/11/10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/po/fr.po: typo fixing

	* printerdrake.pm: fixed wrong case for managing IP for remove CUPS server
	updated typo for remote CUPS server configuration dialog

2000/11/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files

	* share/po/wa.po, share/po/da.po: updated Danish and Walloon files

2000/11/10  Pixel  <pixel@mandrakesoft.com>

	* c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent
	section)

2000/11/09  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: added handling for 2 ethernet cards with the same module

2000/11/09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* share/po/fr.po: add some missing translation (mainly printer for CUPS
	remote config)

	* printer.pm: make sure to restart cups when cupsd.conf is modified.

	* printerdrake.pm: fixed modification of BrowsePoll on a existing file.

2000/11/08  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: updated

2000/11/08  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: make sure class discarding do not destroy result

	* pkgs.pm: added new function for selected or installed accessor on pkg
	make sure package already installed for oem are marked as selected, as
	some
	code refer to this state to perform some actions (install_urpmi)

	* install_steps.pm: fixed for urpmi again;

	* printerdrake.pm: add management of BrowsePoll <ip>:<port> in
	/etc/cups/cupsd.conf

	* printer.pm: add minimal management of /etc/cups/cupsd.conf

2000/11/08  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136)

2000/11/08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/es.po: updated Spanish file

2000/11/07  dam's  <damien@mandrakesoft.com>

	* mouse.pm: now there are 8 ttyS* available for configuration. Used for
	internal modem configuration that uses ttyS* > 3

	* netconnect_new.pm: ttyS0 -> ttyS7 available for configuration
	some doc

2000/11/07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128).

	* install_steps_interactive.pm: use of install_any::boot_medium to avoid
	listing medium used for boot

	* install_any.pm: use of $boot_medium where the boot medium is used
	(default 1)

2000/11/07  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to
	<sileryti@mail.com>

2000/11/07  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): in oem, configureX automatic
	(main): $::oem is now global :-(  (needed in install_steps.pm)

	* install_steps.pm (afterInstallPackages): give medium 'cdrom' to
	install_urpmi in case of $::oem

2000/11/06  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: backend/frontend fork complete

	* any_new.pm: load_thiskind changed to load_thiskind_backend, the wait
	function is passed by argument

	* network.pm: configureNetwork2 commented.

2000/11/06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: created function for examining already installed package on
	install (oem).

	* install2.pm: add a flag to allow by default formating /

	* install_steps.pm: conditionnal format of / and use already installed
	packages if any on install.

2000/11/06  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius
	<ajulius@yahoo.com>

2000/11/06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file
	GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to
	ascii transliteration for them

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po,
	share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po,
	share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po,
	share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po,
	share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po,
	share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po,
	share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po,
	share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po,
	share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po,
	share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po,
	share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po,
	share/po/af.po: updated pot file

	* keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds

2000/11/06  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (formatPartitions): formatMountPartitions done even in
	upgrade
	(main): set $o->{partitioning}{use_existing_root} in oem

	* install_steps.pm (doPartitionDisksAfter): remove the mount_all which is
	plain dumb
	(doPartitionDisksAfter): fs::mount_all moved here
	(doPartitionDisks): use $o->{partitioning}{use_existing_root}

	* install_any.pm (use_root_part): fs::mount_all really removed
	(use_root_part): fs::mount_all removed

	* install_steps_interactive.pm (choosePartitionsToFormat): don't propose
	already mounted partitions
	(installCrypto): nicer layout

2000/11/05  dam's  <damien@mandrakesoft.com>

	* mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse'

2000/11/05  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette
	<yves@maniette.com>

2000/11/01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/eo.po: updated Esperanto file

2000/10/31  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: continuing forking frontend - backend. adsl ist
	nearly finished

	* any_new.pm: added this file to fork frontends and backends in any.pm

2000/10/30  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux
	tu damsera

2000/10/30  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/wa.po: updated Walloon file

	* share/keyboards.tar.bz2: updated keyboards

2000/10/30  Pixel  <pixel@mandrakesoft.com>

	* lang.pm (load_po): backslash @ in po strings, otherwise the eval fails

2000/10/28  dam's  <damien@mandrakesoft.com>

	* netconnect_new.pm: new version of draknet. Splited frontends - backends

2000/10/28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/tr.po: updated Turkish file

2000/10/27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: remove the noising rpm output command line when loging
	installed rpm
	size (only usefull for live_update and just for conveniance).

	* pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP
	hack)
	before reading a compssUsers file.

	* live_install: add VERSION in list of file that have to be symlinked.

	* common.pm: list_skels returns list of existing directory and writeable.

	* live_install2: Make sure to remove font path in /tmp/drakx before
	exiting.

2000/10/26  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and
	Turkish files

2000/10/24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: fortune-mod gets 10/0/10 on request from egil

2000/10/24  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/pl.po: updated Polish file

2000/10/23  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/ca.po: updated Catalan file

2000/10/23  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns
	to please jl :)

	* detect_devices.pm (floppies, probeall): add require "modules" as it
	should be

	* install_interactive.pm (partitionWizardSolutions): add "require
	resize_fat::main" as it should be

2000/10/22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has
	74/0/74

2000/10/21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish
	and Ukrainian files

2000/10/20  fabman

	* share/po/es.po: updated

2000/10/20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: ntp to -1/-1/-1

2000/10/19  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: put all packages requiring kde1-compat to 0 except
	kisdn-free
	aumix now gets a high weight (79) because it's required to save the
	mixer
	settings at shutdown

2000/10/19  Pixel  <pixel@mandrakesoft.com>

	* share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212)

2000/10/19  tlb

	* share/po/da.po: 100%, Troels Liebe Bentsen.

2000/10/18  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/az.po: Added AZeri file

	* share/po/no.po: updated Norwegian file

2000/10/17  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused
	code in ineractive_gtk
	added some isdn card in pcitable
	corrected typos, and made ISA isdn work

2000/10/17  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/lv.po: updated Latvian file

2000/10/16  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot,
	share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po,
	share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po,
	share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po,
	share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po,
	share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po,
	share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po,
	share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po,
	share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po,
	share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po,
	share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po,
	share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file

	* standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace
	setting

2000/10/16  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (cdroms): fix the setting of scdX for ide burners

	* share/compssList: sympa is -1 except for server

	* keyboard.pm (write): small pixelization (neater now)

	* install_steps.pm (installPackages): don't run ldconfig in g_auto_install

2000/10/15  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/nl.po: updated Dutch file

2000/10/14  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm, keyboard.pm: small fix for Swedish locale

	* share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po,
	share/po/wa.po, share/po/de.po: updated Bulgarian file

2000/10/13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* partition_table_empty.pm: empty partition table as assumed only if the
	MBR is really composed of only null chars.

2000/10/13  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: added viavoicemenu

2000/10/12  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (ask_mntpoint_s): dqs

2000/10/11  Pixel  <pixel@mandrakesoft.com>

	* .cvsignore: ignore flog files

	* install2.pm (main): test

	* ChangeLog: qsdqsd

	* install_steps_interactive.pm: * (selectKeyboard): set default
	$o->{langs} to $o->{lang}

2000/10/10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw, ChangeLog: make only one call to urpmi in order to
	install all the needed rpm's

2000/10/10  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/po/no.po, share/po/es.po: updated Norwegian file

	* share/po/pl.po: updated Polish file

	* share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file

2000/10/10  tlb

	* share/po/da.po: 99%.

2000-10-10  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: make only one call to urpmi in order
	to install all the needed rpm's

2000-10-10  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm: increase $::VERSION

2000-10-09  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: update after Dam's new messages in netconnect

2000-10-09  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): remove the handling of
	doc desktop icons. see dadou

2000-10-09  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers: new list (with icons)

	* share/list: add icons for compssUsers

2000-10-09  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: added wait message

2000-10-09  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* share/themes-*.rc: change the fg[INSENSITIVE] entry

2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: added tuxracer in OpenGL games to install if an
	accelerated card has been found.

2000-10-09  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): asking connection after writing start/stop scripts.
	(adsl_conf): if during install, don't use chkconfig, make the
	links directly for the adsl init script.

2000-10-09  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): UserView in kdmrc is
	now true by default. So put false if security >= 3 instead of
	removing it.

2000-10-09  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: default speed of modem set to 115200.

	* fs.pm: fixed format of RAID partition.

	* install_interactive.pm: take into account RAID partitions for
	searching / partition.

2000-10-09  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-09  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (selectKeyboard): don't assume $o->{langs} is set
	(selectLanguage): don't set $o->{langs} (so that you can go back
	and it works)

	* common.pm (round_up, round_down): ensure number is an integer

	* install_steps_interactive.pm (chooseGroups): take into account
	the min_level to compute the size

2000-10-08  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): move the
	computing of max_size before calling chooseGroups (not the one for
	desktop meta_class)
	(chooseGroups): compute the size of Miscellaneous

2000-10-07  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-07  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: don't install locales-* even in 'all' install
	(those files are usefull if RPM_INSTALL_LANG doesn't include that
	lang)	

2000-10-07  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-07  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (install): log the gonna be installed packages (-> be
	able to track not installed packages that should have been
	installed)	

2000-10-06  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf
	(intro): connection detection improved : now use "ifconfig | grep interface"
	(pppConfig): corrected cnx_up/down

2000-10-06  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-06  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): don't fail if
	kdeglobals file is not there	

	* share/compssUsers.desktop: fix icons

	* detect_devices.pm (cdroms): fix for scsi cdrom drives

	* pci_probing/pcitable: put cs46xx instead of snd-card-cs461x
	(dixit jeff)

	* diskdrake.pm (Resize): comment ext2&reiserfs resizing for the
	moment	

2000-10-06  Frederic Lepied  <flepied@mandrakesoft.com>

	* Xconfigurator.pm (write_XF86Config): added mode of wacom devices

2000-10-06  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (ask_connect_now): connection is now tested.

2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps_gtk.pm: updated
	license.

	* Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by
	DRI, use only Mesa with Utah GLX, fixed autologin for avoiding
	drakres and no wm available, moved Riva128 card from experimental
	to stable, fixed presentations of text.

	* pci_probing/pcitable: fixed Cirrus Logic sound card.

2000-10-06  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: fixed bad call to hasUsb...

	* share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep
	530, 620 and 6326 with XFree 4.0.1.

2000-10-06  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-06  Pixel  <pixel@mandrakesoft.com>

	* share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore	

	* install_steps.pm (afterInstallPackages): put the Charset in
	kdeglobals, otherwise kde uses charset iso8859-1 :(

	* lang.pm (charset): created

	* common.pm (update_userkderc): fix it, change the argument
	passing	

2000-10-05  Pixel  <pixel@mandrakesoft.com>

	* share/compssList: raise kde-i18n-*, should be installed whenever
	kdebase is installed

	* pci_probing/pcitable: integrate patch from viet (concerns
	sym53c8xx cards)

	* share/compssUsers: use "documentation" as the database icon

	* install_steps_interactive.pm (chooseGroups): fix to accept icons
	not in the format "*_section.xpm"

	* install2.pm (miscellaneous): put yes/no in sysconfig/usb entries	

2000-10-05  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (adsl_conf): updated pppoe conf.
	(main): added $netc->{minus_one} to avoid to count dhcp configured
	eth when asking to share the connection.
	(adsl-pppoe): improvement. Should work now.
	(miscellaneous): corrected chmod 755 to 744 for connections scripts

	* netconnect.pm (main): network is stopped then started, instead
	of restarted.

2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* live_install: added icons (this fixes the yellow on white
	tooltips problem).

	* install_any.pm: added ghostscript-utils in the list of packages
	to copy when changing CD.

	* printerdrake.pm: install ghostscript-utils if a lexmark printer
	is selected on cups.

2000-10-05  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-05  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (loadO): look for auto_inst.cfg in /, not in
	/Mandrake/base	

2000-10-05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* netconnect.pm: fixed syntax error.

	* share/po/i18n_compssUsers: simplified version and fixed
	dependancies to pkgs.pm (for building drakxtools).

2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_gtk.pm: removed 80 pixel on height for live upgrade.

	* install_steps.pm: do not set keyboard when live upgrade after
	setting the language.

	* install_steps_gtk.pm: fixed the trying to start a X server on
	live.

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* share/po/i18n_compssUsers: fake module ``c'' so that no need to
	build DrakX to use i18n_compssUsers

	* install_steps_interactive.pm (selectLanguage): update license

	* install_steps_gtk.pm (installPackages): add second license for
	shitty soft (commercial one)

2000-10-04  dam's  <damien@mandrakesoft.com>

	* draknet (netconnect.pm and network.pm): various translations
	corrected, network is restarted, buttons connect/disconnect
	debugged. 

2000-10-04  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (main): kill prefdm instead of autologin

	* install_any.pm (find_root_parts): don't use
	suggest_mount_points, it couldn't do what we wanted	
	(guess_mount_point): created, contains the common stuff between
	suggest_mount_points and find_root_parts

2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: fix some failing/untranslated i18n messages

	* share/po/fr.po: write translations according to drakgw
	
2000-10-04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: removed bad card for 3D Rage Pro.

	* install_any.pm: removed Aurora for SiS card, add more case for
	detecting right cdrom for live upgrade, fixed wrong list of
	packages for laptops.

	* c/stuff.xs.pm: added time interval of 200ms between update of
	progression bar of install, make sure the last step is seen.

2000-10-04  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (when_load): stricter regexp for $type is scsi or not
	(so that scsi_mod with is scsi_raw doesn't get an alias
	scsi_hostadapter)	

	* detect_devices.pm (isLS120Drive): extend the regexp to include
	"Caleb Technology - 144MB FDD UHD Floppy"

	* detect_devices.pm (burners, IDEburners): reworked, renamed, now
	works!	
	* c/stuff.xs.pm (isBurner): created

	* modules.pm (load_ide): make sure ide-cd is loaded!

	* install_steps_interactive.pm (chooseGroups): the label and help
	are now translated (at least will be), so use the translations

2000-10-03  Pixel  <pixel@mandrakesoft.com>

	* share/po/Makefile (DrakX.pot): added the to-be-translated from
	compssUsers
	* share/po/i18n_compssUsers: read the compssUsers's and output the
	to-be-translated in po format

	* log.pm (l): log to STDERR instead of STDOUT

	* install_any.pm (loadO): use first floppy drive available (won't
	help much though, as stage1 doesn't follow this...)

2000-10-03  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-03  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (autologin): don't propose autologin in
	security > 3

	* common.pm (availableRamMB): HACK HACK if i810 and memsize,
	returns 127

	* bootloader.pm (suggest): don't use grub if more than 800MB

2000-10-04  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/validate.pl: create this tool
	
	* share/po/fr.po: fix many typos

	* share/po/fr.po: make compssUsers translation

2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator_consts.pm: changed resolution allocation.

	* fs.pm: removed no more used log.

	* install2.pm: add exit button if live upgrade.

	* install_any.pm: increased minimal available size to 65Mb.

	* install_steps.pm, standalone/printerdrake: fixed cups to CUPS
	for mode.

	* printerdrake.pm: fixed not_edit for lpr mode of printerdrake.

	* share/Cards+: fixed Savage2000 entry.

2000-10-03  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: updated bad card with Rage Mobility card.

	* live_install: added test of root user, abort if not root.

2000-10-03  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/po/fr.po: fixed bug #518 and fixed other misc errors

2000-10-03  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-10-02  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm (Resize): fix to make ext2resizing work a little
	better	

	* install_steps.pm: fixed installation of urpmi configuration.

	* detect_devices.pm: updated comment about UltraDMA66/100
	management.

	* modules.pm: updated comment about UltraDMA66/100 management.

	* diskdrake.pm: adding a cylinder for the minimum of the resize
	and if there is nothing to do for resize, simply return.

	* install_any.pm: added missing require pkgs.

2000-10-02  Pixel  <pixel@mandrakesoft.com>

	* many files: remove many lnx4win special cases which are not
	needed anymore        
	
	* any.pm (addUsers): grpuser output goes to Mr Dave

	* bootloader.pm (install_lilo): change the default color of menu

	* install_steps_interactive.pm (choosePackages): add 300MB choice
	in desktop

	* mouse.pm (fullnames): fix i18n fix

	* install_steps.pm (miscellaneous): don't add ide2=0x... for
	ultra66 (otherwise chmouel is not happy, so is hdc being hde)
	
	* Xconfigurator.pm (main): add handling of icewm logout

	* c/stuff.xs.pm: changed the stepping of "Progressing installing package"

2000-10-02  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): infos are written only when needed.
	* netconnect.pm (intro): connection checking now works.
	
2000-10-02  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like
	jeff request.

2000-09-30  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-30  dam's  <damien@mandrakesoft.com>

	* netconnect.pm: a LOT of bugs fixed. draknet is now completely
	brok^H^H^H^Hfrozen.

2000-09-29  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-29  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (adsl_conf): dhcp should better work.

	* network.pm (configureNetwork): remove connection script if a
	gateway is given.

	* common.pm (setVarsInShMode): created. chmod the file with
	permissions passed in argument.

2000-09-29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* modules.pm (load): fixed when standalone, use modprobe.

	* pkgs.pm: added preference for wu-ftpd.

	* detect_devices.pm: added code to proble USB printer.

	* printer.pm: fixed missing PRINTER=yes on CUPS configuration for
	USB printer.

	* install_steps.pm: removed possibilty to add an user in urpmi
	group (jloup).

	* install_steps_interactive.pm: log if CD not ejectable.

2000-09-29  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: sync with latest packages

	* install_steps_interactive.pm (selectLanguage($)): s/42/43/ in
	  MandrakeSoft physical address 

2000-09-29  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-29  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (intro): detection of internet
	configuration/connexion state.
	
	* network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): add read_already_loaded cuz of
	pcmcia	

2000-09-28  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: add nasty DrakSync and DrakProfile with 50 0 50

2000-09-28  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): the minimum is 25
	in beginner, not 10

	* pkgs.pm (readCompssUsers): fix reading description

	* install_steps.pm (afterInstallPackages): remove the code to
	handle RPM-GPG-KEYS

2000-09-28  dam's  <damien@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_list_with_helpW): no more theme
	parsing, no more draknet.rc

	* netconnect.pm (read_net_conf): no adsl tree anymore.

	* netconnect.pm: drakgw called if enough card are installed.

	* netconnect.pm: minor bugs correction.

2000-09-28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Makefile.config: added livedrake for drakxtools.
	* diskdrake.pm: use corrected partition size when resizing a dos
	partition (like the others).
	* install_any.pm: no more pnm2ppa packages and others in package
	to copy when changing CD.
	* live_install: exec live_install2 instead.
	* live_install2: contains post live upgrade stuff now.
	* printerdrake.pm: protect set_help() usage by if $::isInstall,
	removed reference to package pnm2ppa and others.
	* standalone/livedrake: initial release for drakxtools.

2000-09-28  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-28  Pixel  <pixel@mandrakesoft.com>

	* install_interactive.pm (partitionWizardSolutions): fix the limit
	cases for lnx4win	

	* share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation	

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): set $size2install
	to $availableC in desktop install, as it should be

	* install2.pm (choosePackages): remove the code for removing kdesu
	in high security...

	* install_steps_interactive.pm (createBootdisk): format more
	nicely the text

	* install_steps_gtk.pm (installPackages): add 10 seconds to have a
	better estimation

	* install_steps_interactive.pm (chooseGroups): now returns a boolean
	(choosePackages): use chooseGroups return value to redo
	choosePackages	

	* install_steps_gtk.pm (selectMouse): if mouse type is none, then
	don't test!

	* Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom

	* various: replace all Rescue by Update

	* pkgs.pm (readCompssUsers): read description for groups
	
	* install_steps_interactive.pm (chooseGroups): add description for
	groups	

2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssUsers.desktop: added description

	* share/compssUsers: added description

	* share/compssUsers.desktop: added icon support, reordered,
	  renamed

	* share/compssUsers: reordered, renamed

2000-09-27  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectLanguage): intregrate
	license again

	* pkgs.pm (readCompssUsers): reads compssUsers.meta_class

	* diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/''
	(as should be)

	* install_steps_gtk.pm (selectInstallClass1): if @$l (list of
	install classes) contains only one element, call
	install_steps_interactive::selectInstallClass1	

	* install_steps_interactive.pm (choosePartitionsToFormat): fix for
	"no partitions selected to format"

	* my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie	

2000-09-27  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* share/compssList: more for gnupg, -11 for sucking things,
          changed compss-groups to be less than 70.

	* share/compssUsers: modified compssUsers with Warly, added
          compssUsers.desktop, simplified for KD (now uses Graphical
	  Desktop/KDE instead of listing all relevant packages)

2000-09-27  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (get_info_adsl_providers, read_adsl_providers):
	Created. adsl provider tree. 
	(set_net_conf): better informations storing.

	* my_gtk.pm (new): windows are always centered if standalone.

2000-09-27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed
	3D hw acceleration for i815 (VideoRam). prefer XF3 for all
	NeoMagic cards.
	* install_gtk.pm: re-enabled themes on live upgrade but without
	modifying background image.
	* install_steps_gtk.pm: fixed missing help.
	* live_install: lot of fixes to enable DrakX font, keep upgraded
	system clean (libperl.so which allows graphical login).
	* pkgs.pm: added function allowedToUpgrade to filter kernel
	package.

2000-09-27  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (configureX): if `clicked' don't go
	to auto mode

	* Xconfigurator.pm (monitorConfiguration): fix the translated
	'Generic' which is not so (and must not be so) anymore

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm: remove all Unskip code

	* my_gtk.pm (_create_window): add shortcut alt-e to switch to
	expert

	* Xconfigurator.pm (resolutionsConfiguration): fix for setting
	legal resolution

	* install_steps_interactive.pm (selectLanguage): use formatAlaTeX
	on the license

2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* fs.pm: added mounting of swap partition when mounting them
	all (this can help :-) 
	* pkgs.pm: fixed correction size code to make (really) a true
	bijection between corrected and rpm size.

2000-09-26  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectLanguage): integrate the
	license (temporary one)

	* modules.pm (write_conf): fix the /etc/modules generation

	* interactive_gtk.pm (ask_many_from_listW): if more than 5 entries
	in icon format, use scrollbar. In non-icon format, use scrollbar
	for more than 11 entries.

	* commands.pm (bug): add ddcxinfos

	* pci_probing/pcitable: replace tulip by de4x5 for 2104x cards	

2000-09-26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added more 3D Rage Pro card for 3D
	acceleration with Utah-GLX (Rage Mobility, Rage XC/XL),
	modified identification for checking acceleration.
	* install_any.pm: added automatic installation (up 60) for
	OpenGL games if a graphic card MAY BE accelerated.
	* live_install: fixed perl idioms in pure shell script and added
	packdrake symlink if not already installed.
	* share/compssList: changed level to -1 for all needing 3D hw
	acceleration packages.

2000-09-26  dam's  <damien@mandrakesoft.com>

	* network.pm (write_resolv_conf): write temp dns line to be used
	with new initscripts package. Use to set dns live.

2000-09-26  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-26  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (read): catch exception if fullname2mouse fails (eg:
	old FULLNAME format)

2000-09-25  Pixel  <pixel@mandrakesoft.com>

	* share/MonitorsDB: merge with latest redhat MonitorsDB

	* pci_probing/pcitable: major merge with latest redhat pcitable

	* share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to
	"Rage 128", added "Rage 128 Mobility"

	* install_any.pm (getAvailableSpace): keep 10% of free space on
	big partitions

	* Xconfigurator.pm (readMonitorsDB): don't translate Generic
	(otherwise, only a part is translated, see MonitorsDB for the
	non-translated part)

	* interactive.pm (ask_many_from_list): fix sorting

	* install_gtk.pm (test_mouse): smaller box to fit in 640x480

	* install_steps.pm (afterInstallPackages, beforeInstallPackages):
	RPM-GPG-KEYS is copied before installing packages

	* pkgs.pm (readCompssUsers): handle icons in compssUsers

	* common.pm (truncate_list): ensure the list is not too big

	* install_steps_gtk.pm (choosePackagesTree): restrict the list to
	20 elements if it is too big (use truncate_list)

2000-09-25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: add Video mode for entry.
	* fs.pm: updated for live upgrade.
	* install2.pm: dropped unuseful steps filtering.
	* install_any.pm: fixed wrong Device3Dfx package name and clean
	postinstall rpms directory on upgrade before filling it.
	* install_gtk.pm: removed window restrictions of live upgrade.
	* install_steps.pm: fixed initrd symlink following in case of
	upgrade.
	* install_steps_gtk.pm, install_steps_interactive.pm: keep always
	upgrade on live upgrade.
	* modules.pm: may fixed pcmcia lost driver (typically on network).
	* pkgs.pm: fixed (uggly?) usage of floating perl data on perl
	script :-)
	* printer.pm: back to "Generic PostScript" for default printer (jloup).
	* printerdrake.pm: make sure an expert can choose among available
	devices.

2000-09-25  dam's  <damien@mandrakesoft.com>

	* network.pm (write_resolv_conf): write '# ppp temp entry adsl' in
	/etc/resolv.conf if needed.

	* netconnect.pm : adsl connection does'nt need any dns anymore.

	* netconnect.pm (read_net_conf): created. draknet now stores and
	reload the config.
	
	* netconnect.pm (main): if the user is french and uses french
	keyboard, don't ask his country.

2000-09-25  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: added 8139too

	* share/Cards+: GeForce2 DDR is handled by driver "nv"

	* Xconfigurator.pm (main): in killall X for Xdrakres, also killall
	kdm/xdm/gdm/autologin :)

2000-09-25  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-25  dam's  <damien@mandrakesoft.com>

	* network.pm (configureNetwork): Warn user if he already
	configured the interface.

2000-09-24  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (mergein_conf): created. call read_conf, fills
	%modules::conf and set $modules::scsi

2000-09-24  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit

2000-09-24  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-24  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (bug): use first floppy drive instead of fd0 hard
	coded (nice for LS120's)

	* install_steps_gtk.pm (selectMouse): if device changed, do the
	test	
	* standalone/mousedrake: fix for serial mice
	* install_steps_interactive.pm (selectMouse): fix for serial mice

2000-09-23  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (conf_network_card): now displays the modules of
	detected ethernet cards.

2000-09-22  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (main): calls drakegw.
	* netconnect.pm (get_net_device): fixed

2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw:
	  - added logs
	  - added verbose mode
          - fixed wrong stopping of named in other languages than english

	* netconnect.pm (get_net_device): try to fix it..

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard,
	choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list
	(): 

	* interactive.pm (ask_many_from_list): now only ask_many_from_list
	exists, obsoleting ask_many_from_list_ref and
	ask_many_from_list_with_help. More flexible and nicer
	* interactive_newt.pm (ask_many_from_listW): adapted to new
	calling type
	* interactive_gtk.pm (ask_many_from_listW): adapted to new calling
	type, handle 'shadow' and 'icon2f'

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win}

	* Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for
	i810	
	(testFinalConfig): i810 is a verybad_card, aka can't test anything
	on it :-(
	(main): fork to background and stay there while waiting for the WM
	to exit
	(testFinalConfig): update the backgroung image path

	* interactive_gtk.pm (exit): flush X before leaving (otherwise the
	mousecursor is not restored)

	* run_program.pm (rooted): don't redirect the stdout and stderr to
	ddebug.log if not $::isInstall

	* log.pm (l): log on stdout/stderr if !isInstall and !isStandalone

	* modules.pm (load_raw): redirect stderr to tty5

	* install2.pm (main): set variable $::isInstall

2000-09-22  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-22  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/drakgw: now includes information from netconnect to
	ignore the interface used for Internet connection

2000-09-22  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm (selectInstallClass1): pixel's typo.

	* netconnect.pm (get_net_device): added get_net_device to know
	which interface has been used to configure the internet connection.
	(conf_network_card): ask to restart network if dhcp too.
	(main): enable dialing when modem.

	* network.pm (configureNetworkIntf): changed label to warn people
	about already configured eth cards.

2000-09-22  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_gtk.pm: added Desktop themes.
	* share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png:
	initial release.
	* install2.pm: moved back to all steps for live upgrade.
	* install_gtk.pm: select right logo if desktop.
	* install_steps_interactive, install_steps_gtk.pm: avoid asking if
	upgrade for a live upgrade.

2000-09-22  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm: add some call to log_sizes to log the
	installed size

	* install_steps_gtk.pm (installPackages): beep before changeMedium		

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf): try to call the f translation
	function on the default value with the index

	* install_steps.pm (afterInstallPackages): make the gpg code work,
	changed the call to 
	"gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS"

	* detect_devices.pm: cleanup and removed unused code

2000-09-21  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* detect_devices.pm (getNet()): really remove plip in standalone

2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm, netconnect.pm: changed NETWORKING reference
	from false to no.
	* printer.pm: changed timeout from 30 to 60.
	* printerdrake.pm: added wait message when waiting for cups to
	start.
	* pci_probing/pcitable: added erwan VIA Rhine board.
	* network.pm: added DHCP_HOSTNAME reference.

2000-09-21  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* standalone/keyboarddrake: fix for XF4

	* Xconfigurator.pm (write_XF86Config): comment the omit
	xfree86-dga	

	* install_steps.pm (afterInstallPackages): configure GPG public
	keyring with mandrake key	

	* standalone/mousedrake: updated/fixed for new mouse handling	

	* install2.pm (main): update for handling oem installs

	* many files: relGetFile cleanup, updated calls to getFile and
	getAndSaveFile accordingly

	* Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg

	* detect_devices.pm (@netdevices): plip removed in standalone,
	otherwise plip is always there (because of kmod)

	* install_steps_interactive.pm (choosePartitionsToFormat): replace
	the die "cancel" by die "already displayed", so that no error is
	displayed.

	* pci_probing/pcitable: replace some rtl8139 by 8139too, added
	cards DELTA8139 and ADDTRON8139 (for jeff)

	* Xconfigurator.pm (show_info): also show the colordepth and
	resolution. don't show server if none, show XF4 driver if there's
	one.	
	(main): change the "Forget the changes" to "Keep the changes?"
	with displaying the current configuration.

2000-09-21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printer.pm: changed "PostScript" ppd default description to "Raw
	queue (no filtering)", asked by Till.
	* Xconfigurator.pm: add log of what user select for 3D hw
	acceleration.
	* share/compssList: changed XFree86-glide-module to -2 because the
	level is the same for XFree86-Glide* which may have multiple
	different version installed due to dependancies of the first one.

2000-09-21  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (conf_network_card): added check when dhcp. Cable connection
	should now work.

2000-09-21  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (exitInstall): call $o->exit if
	"Some steps are not completed"

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* bootloader.pm (install_loadlin_config_sys,
	install_loadlin_desktop): extracted from install_loadlin, do not
	call them anymore (remove it?)
	(suggest): put grub in lnx4win install

	* common.pm (availableRamMB): fixed (round to a multiple of 4)	

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (get_info_isdn_providers & read_isdn_providers):
	read file in /usr/share and $prefix/usr/share 
	(isdn_write_config): corrected file to be sh compliant.
	(isdn_write_config): added default route settings for isdn.

2000-09-20  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace es1371 by snd-card-ens1371

2000-09-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 

2000-09-20  Guillaume Cottenceau  <gc@mandrakesoft.com>

	* standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume 

	* standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 

2000-09-20  dam's  <damien@mandrakesoft.com>

	* standalone/draknet: used new package install function.

2000-09-20  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (isFloppyOrHD): detects wether a device is a
	floppy or not based on its size (for scsi floppy)

	* Xconfigurator.pm (testFinalConfig): check if "server" OR
	"driver" field is set (otherwise XF4 only card won't pass)

	* bootloader.pm (suggest): fix for ``installing the last cooker
	from kenobi:/I on an smp machine i don't get anymore an entry for
	linux-up'' (c chmouel)

2000-09-20  dam's  <damien@mandrakesoft.com>

	* netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0])

2000-09-20  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (get_pcmcia_devices): fix (especially, now ethernet
	should be detected)

	* lang.pm (get_langs): created, gives rpm install langs
	* install_any.pm (setPackages): give langs::get_langs() to
	readCompssList	
	* pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given
	$langs instead. This fixes the RPM_INSTALL_LANG=all install.

2000-09-19  Pablo Saratxaga <pablo@mandrakesoft.com>

	* netconnect.pm: make dhcp-client, pump and such not translatable.
	Those are program names and should therefore not be translated,
	that only confuses translators

2000-09-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm (autologin): corrected @users definition and
	passwd cat.

2000-09-19  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* many files: changed some access to get_root to get_root_	
	
	* install_steps_interactive.pm (choosePackages): added code for
	desktop meta_class install type

	* install_steps_gtk.pm (selectMouse): cleanup, give parameter
	emulate3buttons to setMouseLive
	* c/stuff.xs.pm (setMouseLive): add argument emulate3buttons

2000-09-19  Guillaume Cottenceau <gc@mandrakesoft.com>

	* interactive*.pm: changed `suspend' and `resume' to behave as expected,
	added `enter_console' and `leave_console'

2000-09-19  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by
	META_CLASS

	* Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false
	result (not enough VideoRam), also remove the found resolutions
	* Xconfigurator.pm (main): remove the automatic searching of
	resolutions	
	* Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the
	automatic searching of resolutions.

	* mouse.pm (fullnames): changed the `_' in `[' before Other
	(nicer, uh?)

	* install2.pm (selectMouse): changed clicked to !first_time

2000-09-19  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-19  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): remove the bloody prototype

2000-09-19  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-18  Dam's  <damien@mandrakesoft.com>

	* Xconfigurator (autologin): do it eve, if newbie. Autologin is
	now in separated function.
	
2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (testFinalConfig): don't skip the test in auto
	if called via "Test again"
	* Xconfigurator.pm (resolutionsConfiguration): ensure all depth
	are bounded

	* bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is
	classic and no-fb

	* fsedit.pm (check_mntpoint): add a check for /etc /lib... which
	must not be mount points. Also check that /home, /tmp and /usr are
	on trueFS

	* interactive.pm (ask_from_entries_ref): add bounding of "val" in
	case of type "range". die if min > max.

2000-09-18  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): nicer
	partition/device display

	* partition_table_raw.pm (zero_MBR): add on the fly require of the
	good partition_table_$type

	* detect_devices.pm (cdroms): fix (yet again) the scd$nb device
	assignment to ide burners

	* install_steps.pm (afterInstallPackages): comment out a part of
	the icons mess messing

	* Xconfigurator.pm (cardConfiguration): move Unlisted to
	Other/Unlisted
	* share/CardsNames: updated (for Voodoo5)

	* install_steps_gtk.pm (selectMouse): fix the test to know wether
	the guy has changed the mouse type (to know wether to test the
	mouse or not)

	* install_steps_interactive.pm (selectLanguage): add the license
	
	* install_steps_interactive.pm (choosePackages): have the
	"Recommended" size be the default 
	(in the choice Minimum/Recommanded/Complete)
	
	* diskdrake.pm (Type): fix a typo

	* install_steps.pm (doPartitionDisksAfter): mark partition as
	mounted	

2000-09-17  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-17  Pixel  <pixel@mandrakesoft.com>

	* install/pcmcia_config.patch: cleaned
	
	* diskdrake.pm (Create, Type): have type field not_editable

	* tools/make_mdkinst_stage2: use TMPDIR if available

2000-09-16  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): move
	the setting of toFormat before asking for bad blocks, seems to fix
	things?? weird :-/

	* network.pm (miscellaneousNetwork): fix the setting of focus on
	error (tx2Thomas Poindessous :)	

	* install_steps_interactive.pm (configurePrinter): changed
	"Cancel" to "None" (for Thomas Poindessous :)

	* printer.pm (poll_ppd_base): max polling time raised from 10s to
	30s (for Till)	

	* install_steps.pm (ask_mntpoint_s): don't force partition type to
	be ext2 (at least if it's a known fs) (for Warly)

2000-09-15  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-15  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (set_help): save the help message displayed
	in $o->{current_help}
	* install_gtk.pm (create_big_help): display $o->{current_help}

	* mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice.	
	* install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm
	* install2.pm (selectMouse): adapted for mouse::read now returning
	an hash ref

	* detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in
	one function (now takes the device in the parameter)

	* interactive.pm (ask_from_treelistf): added (just like
	ask_from_listf, but with a tree)

	* Xconfigurator.pm: the reference is now nbuttons to
	know wether to put Emulate3Buttons or ZAxisMapping.
	* Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on
	Banshee too.

	* Xconfig.pm: guess nbuttons based on Emulate3Buttons and
	ZAxisMapping.

	* common.pm (availableRamMB): replace availableRam, now use the
	size of /proc/kcore (what else to find the real ramsize?)

	* common.pm (cat__): created

	* install2.pm (main): add field meta_class in $o. Can be
	'desktop', in case option desktop is given, or if /desktop/i is
	found in /VERSION

	* install_steps.pm (miscellaneous): for lnx4win, always have
	'mem=' (so that the initrd is visible by both windows

	* install2.pm (main): add option "desktop"

	* install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format

	* install_interactive.pm (partitionWizardSolutions): 
	use only TrueFS for existing_part
	(partitionWizard): have only "loopback" for lnx4win

	* pci_probing/pcitable: associate Voodoo5 with Voodoo5

	* share/Cards+: add Voodoo5

	* bootloader.pm (suggest): add entry linux-nonfb (called linux-up
	for smp)

2000-09-14  DrakX <install@mandrakesoft.com>

	* snapshot uploaded

2000-09-12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, mouse.pm: moved probing serial port before to
	detect a wacom tablet (even if a PS/2 or USB mouse is found).
	* help.pm: corrected reference to previous version of LM (jloup).
	* install2.pm: removed duplicate code for getting network
	configuration, using network module.
	* netconnect.pm: intf is now a hash and no more an array.
	* network.pm: changed nature of intf to hash from array, reworked
	write_resolv_conf function to keep old code in comment but only
	when not used anymore (to make it easier by hand modification).
	* printer.pm: SOCKET accessible to expert only (jloup).
	* printerdrake.pm: local port only available for expert if a
	printer has been detected (jloup).

2000-09-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: reorganized choices of 3D optimizations, added
	experimental support for expert users.
	* install_steps_interactive.pm: removed question to keep XF3.

2000-09-05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: removed all previous URI specific mode and
	added socket and expert URI general mode.
	* printer.pm: fixed bugs, start lo interface before cups.

2000-09-04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added pnm2ppa and lm110 support in cups
	configuration. probe for printer device (parallel) and try to
	install usb for printer.
	* printer.pm: removed local printer configuration for cups (keep
	only local configuration using URI).

2000-09-01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3
	is installed, make 16bits by default on 3D hardware acceleration,
	fixed selection of hardware for hardware acceleration.
	* install_steps.pm: add cups for printer configuration, used for
	auto_install. added new function to add packages only if requires
	are already satisfied.
	* standalone/printerdrake: updated.

2000-08-31  dam's  <damien@mandrakesoft.com>

	* moved many things to network.pm and any.pm
	* everything should be broken now.

2000-08-31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: removed printer default config (now obsoleted).
	* install_steps_interactive.pm: add cups support.
	* printerdrake.pm: add cups support.
	* printer.pm: add cups support.

2000-08-31  Frederic Lepied  <flepied@mandrakesoft.com>

	* install_any.pm (setPackages): install the right glide module
	according to the Voodoo card detected.

	* Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4.
	(autoDefaultDepth): default depth to 16 for Voodoo cards except
	for Voodo5 ones.

2000-08-29  dam's  <damien@mandrakesoft.com>

	* moved pppConfig in netconnect.pm and any.pm
	* moved miscellaneousNetwork in any
	* modem configuration is now useable in standalone mode.

2000-08-29 David BAUDENS <baudens@mandrakesoft.com>

	* install_steps_interactive.pm: change Small/Normal/Full ->
	  Minimum/Recommanded/Complete (aka make FredB happy)

2000-08-28  dam's  <damien@mandrakesoft.com>

	* draknet (netconnect): renamed drakfuck -> draknet. standard ADSL
	and french alcatel ADSL implemented.
	* Xconfigurator.pm (autologin) : use of the new autologin system.

2000-08-24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* ../update_kernel*: changed reference from extract_archive to
	packadrake.
	* Makefile*: added live_install and live_install2.
	* Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage
	Pro AGP card type, commented SiS and S3ViRGE support by GLX.
	* commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*:
	updated to use packdrake now.
	* install2.pm, install_steps.pm, install_steps_gtk, Makefile*:
	manage live upgrade.
	* modules.pm: use standard modprobe command for load in live
	upgrade.
	* netconnect.pm: added minimal modification for being compilable.
	* rescue/list: added packdrake and sfdisk.
	* live_install, live_install2: live upgrade of package.

2000-08-22  dam's  <damien@mandrakesoft.com>

	* drakfuck (netconnect):finished isdn PCI/ISA card implemetation
	* added isdndb.net: providers database

2000-08-20  dam's  <damien@mandrakesoft.com>

	* moved Netconnect.pm to netconnect.pm
	* moved DrakFuck to drakfuck

2000-08-18  Pixel  <pixel@mandrakesoft.com>

	* share/Cards+: for i810, force VideoRam

2000-08-18  dam's  <damien@mandrakesoft.com>

	* modules.pm: added isdn type in @drivers_by_category. corrected
	load_thiskind (thx pixel) : it's not unsafe anymore
	* Netconnect.pm: just display PCI isdn card recognized.
	
2000-08-17  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm: many cleanup. moved some functions to common,
	any or install_interactive (newly created)

2000-08-16  dam's  <damien@mandrakesoft.com>

	* install_steps_interactive.pm(configureNetwork): added call to
	isdn configuration
	* added standalone/DrakFuck: standalone entry point to configure
	internet connexion.
	* added Netconnect.pm: internet connexion functions.

2000-08-11  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectInstallClass): yet a bigger
	warning so that people don't choose expert installs. Also set the
	focus on "Custom" by default.
	
	* install_steps_interactive.pm (doPartitionDisks): created, calls
	the wizard.
	* install_steps.pm (doPartitionDisksBefore,
	doPartitionDisksAfter): created (was mainly in
	install2::doPartitionDisks)
	* install2.pm (doPartitionDisks): much cleanup
	* install_any.pm (partitionWizard): working state (still rough)

2000-08-08  Pixel  <pixel@mandrakesoft.com>

	* standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the
	cdrom addmedia

2000-08-07  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Resize): 
	* install_steps_gtk.pm (doPartitionDisks): remove the
	before_leaving ensuring the filehandle is closed
	* resize_fat/main.pm (DESTROY): use a better solution for ensuring
	the filehandle is closed

2000-08-07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added SiS6326 in the list of chipset that
	needVideoRam, reported on ml.
	* install_steps.pm: fixed auto install of printer.

2000-08-06  Pixel  <pixel@mandrakesoft.com>

	* interactive.pm (ask_from_listf): created this GREAT function
	that should have been created a long time ago.
	* any.pm, install_any.pm, install_steps_gtk.pm,
	install_steps_interactive.pm: a lot of rewrite to use the new
	ask_from_listf, a lot of nice cleanup!

	* fs.pm (df): created, returns the free space of the part. Save it
	in $part->{free}

	* install_steps_gtk.pm (doPartitionDisks): ensure the closing of
	the device in case of error
	* resize_fat/main.pm (new): ensure the closing of the device in
	case of error

	* install_any.pm (partitionWizard): the great partitioning wizard
	is created. Not finished yet (nor called from anywhere)

	* install_steps.pm (doPartitionDisksLnx4win): created function out
	of doPartitionDisks

	* install_steps_gtk.pm (installPackages): removed the displaying
	of size to install (people are bothered cuz not the same size)

2000-08-06  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): use drawing area
	instead of button. Implemented all steps events. 

2000-08-05  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): test a hack for usb mouse via hub
	(sparhawk@enteract.com)	

	* fsedit.pm (undo): force isDirty and needKernelReread only if hd
	hasBeenDirty, otherwise believe the flag saved
	* partition_table.pm (write): flag hd as hasBeenDirty

	* install2.pm: a few renaming of methods so that the step names
	correspond to install2 function and install_steps* methods (eg:
	configureX & setupXfree unified to configureX)

2000-08-04  dam's  <damien@mandrakesoft.com>

	* any.pm (setAutoLogin): added this method to write xdm-config
	* Xconfigurator.pm: clenead autologin code and use of above method

2000-08-04  Pixel  <pixel@mandrakesoft.com>

	* pkgs.pm (setSelectedFromCompssList): save $nb to able to restore
	it in case of max_size reached. only purpose is the log!

	* install_steps_interactive.pm (choosePackages): in newbie, ask
	between Small/Medium/Full install
	* install_steps_interactive.pm (choosePackages): in expert, have
	the min_mark be 0 instead of 1

	* common.pm (find_index): added this nice function

	* install_any.pm (getAvailableSpace_mounted): use common::df
	* loopback.pm (getFree): use common::df
	* commands.pm (df): use common::df
	* common.pm (df): added

	* diskdrake.pm (Resize)): add resizing of reiserfs
	* share/list.i386: add resize_reiserfs


2000-08-02  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm : autologin is functionall. When wmsession.d is
	more up to date, I'll add the list of wm to launch at boot. It
	writes in /etc/X11/xdm/xdm-config.
	
2000-08-01  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (miscellaneous): modify as chmouel want (aka, ""
	instead of "no" for MOUSE and KEYBOARD in sysconfig/usb)

	* services.pm: separation between interaction and action.
	* install_steps.pm (servicesConfig): the job is now done here	
	* install_steps_interactive.pm (servicesConfig): only the asking
	part	

2000-08-01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed the below fixe, now ok.
	* Xconfigurator.pm: fixed a bug for using default card flags
	setting, add support for GeForce DDR for both 3.3 and 4.0.
	* pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use
	XFree 3.3 as unsupported in XFree 4.0.
	* share/Cards+: added "NVIDIA GeForce2 DDR (generic)".

2000-07-31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: fixed provided package with choice in deps used with a
	base package, complicated but kernel-fb or similar can be
	unselected now.

2000-07-27  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: changed expert message to ask
	using XFree 3.3 instead of XFree 4.0 used by default (server).
	* Xconfigurator.pm: make sure only one server is installed,
	default to XFree 4.0 if supported unless XFree 3.3 accept
	3D acceleration and not XFree 4.0, ask user in such case.
	* pci_probing/pcitable: added Intel 815 pci ids.

2000-07-26  dam's  <damien@mandrakesoft.com>

	* install_steps_gtk.pm: applied new LN stars, logo title and help
	logo. improved steps appearences.
	* modified share/step-*.xpm
	* added share/help.xpm
	* updated ../HACKING to ling help logo.

2000-07-21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: enable 3D acceleration configuration with
	XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3
	Utah-GLX accelerated module.

2000-07-20  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: use {miscellaneous}{autologuser} instead of
	{miscellaneous}{autologuser} + {miscellaneous}{autologing}.
	* move some README content to ../HACKING

2000-07-19  dam's  <damien@mandrakesoft.com>

	* Xconfigurator.pm: added autologin boxes.
	result is in {miscellaneous}{autologin} and in
	{miscellaneous}{autologuser}
	
2000-07-19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* any.pm: added default root to existing root device when adding
	an entry in bootloader.
	* bootloader.pm: avoid duplicating entry (floppy and old-floppy)
	when they are identical.
	manage hackkernel by suggest an entry by default if installed.
	* install_steps.pm: reworked symlink closure for bootloader
	to keep previous configuration.

2000-07-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm,
	this include a configure_entry from silo.pm to build a initrd if
	used.
	* share/compssList: added kde2 packages.
	* share/compssUsers: added kde2 group, renamed kde to kde1 group
	specific.

2000-07-07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm (choosePackages): always execute setPackage to copy
	hdlist* and depslist files (support mixed partitionDisks and
	choosePackages).
	* install_any.pm (setPackages): avoid clearing upgrade flag.
	* install_steps.pm (choosePackages): use $first_time to avoid
	reselection of packages according to compssList.
	* install_steps_interactive (choosePackages): use $first_time and
	$individual to avoid reselection of packages according if user go
	back to step choosePackages.
	* pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and
	depslist files in /var/lib/urpmi.
	* diskdrake.pm: fixed uneditable combo for Mount point action.

2000-06-23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: better approach for Sun* server in newbie.
	* fs.pm: added romfs support for mount.
	* fsedit.pm: changed auto allocation for partitions for sparc*.
	* install2.pm: restored bootdisk creation and auto install boot
	disk creation for sparc*.
	* install_any.pm: changed vfat to romfs when mounting kickstart
	floppy on sparc*.
	* install_steps.pm: avoid proposing formating sunos partition.
	* install_steps_interactive.pm: boot disk for sparc* and support for
	installation of SILO on /boot partition (sparc*).
	* install_steps_newt.pm: removed cylinder 0 bug warning.
	* interactive.pm: fixed typo for not_edit set to 1 by default.
	* partition_table.pm: fixed get_holes on sparc* where a whole disk
	partition caused problems.
	* partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs.
	* silo.pm: handle /boot partition, install silo.conf in /boot and
	make a symlink from /etc.
	* share/list.sparc: added losetup and genromfs for boot disk creation.

2000-06-21  Pablo Saratxaga <pablo@mandrakesoft.com>

	* lang.pm: changed the way console font data is written; not all
	of the [0], [1], [2] values must defined, so three cases must be used.
	Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then
	be used by console-tools to load the proper compose table

2000-06-20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* c/sbus.c: added some functions for silo.c integration.
	* c/silo.c: initial release including write in prom, and translation
	of disk name from openprom to linux, rh version modified.
	* silo.pm: added write in prom, support of sunos boot from silo.
	* partition_table.pm: added support for ufs partition like windows one.
	* install_steps_interactive.pm: added other entries in silo.
	* install_steps.pm: support sunos partition.
	* install_any.pm: automatically mount sunos partition with diskdrake.
	* fsedit.pm: added /mnt/sunos suggested mount point.
	* fs.pm: added ufs support for mount.

2000-06-19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* crypto.pm: modified for getting sparc crypto file for sparc*.
	* modules.pm: make sure to load sd_mod when needed.
	* pci_probing/main.pm: always use loaw_endian in pci structs.
	* pci_probing/translate-pcitable.pl: added arch specific module name
	translation.

2000-06-16  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): rename conf.modules to modules.conf if
	needed. Outputs to modules.conf

	* detect_devices.pm (cdroms): fix using scd0 for ide-burners when
	already a scsi cdrom drive

2000-06-13  Pablo Saratxaga <pablo@mandrakesoft.com>

	* pkgs.pm: added 'acon' requirement for all right-to-left languages

2000-06-07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: added SunOS partition as blue for diskdrake.
	* install_steps_interactive.pm: make sure of no division by zero may
	happen.
	* install_steps_newt.pm: added WARNING for fdisk on sparc*.
	* modules.pm: make sure of loading sd_mod module after any scsi module.
	* sbus_probing/main.pm: insmod openprom before trying sbus probing.
	* pkgs.pm: corrected by use of parabolic solution for size approximation.
	* silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe.

2000-06-05  Pablo Saratxaga <pablo@mandrakesoft.com>

	* install_steps.pm,lang.pm: added load_console_font, to load the 
	proper console fonts (text mode install is not very useful otherwise)

2000-06-03  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): don't accept less than 32MB part for reiserfs
	* diskdrake.pm (Type): don't accept less than 32MB part for reiserfs

2000-06-01  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font;
	it fits better with the other fonts. Added a 'README' file with
	some comments and the required copyright notice

2000-05-29  Fran�ois Pons  <fpons@mandrakesoft.com>

	* Xconfigurator.pm: added support for SBUS card autodetection.
	* commands.pm: added lssbus to list SBUS devices detected.
	* detect_devices.pm: removed alpha restriction on USB.
	* install_steps_interactive.pm: added SBUS support.
	* c/sbus.c: initial revision, core SBUS support (inspired from kudzu).
	* c/stuff.xs.pm: added wrapper for sbus.c interface.
	* sbus_probing/main.pm: initial revision (inspired from kudzu).

2000-05-27 Adam Lebsack <adam@mandrakesoft.com>

	* share/list.ppc: various PPC modifications, for HFS
	* partition_table_mac.pm: bug fixes
	* partition_table.pm: various HFS fixes, isHiddenMacPart()
	* diskdrake.pm: added HFS to top buttons when run on PPC
	* keyboard.pm: fixed name of mac-fr2-ext keymap
	* install_steps_gtk.pm: added Xpmac server support for PPC.
	* install_steps_interactive.pm: disallow hardware configuration on PPC for
	now.  All drivers should be in the kernel. setup_this_kind().
	* fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match
	our partition table read.  Added PPC grep condition for PPC in get_visible_fstab.
	* fs.pm: fix argument for HFS formatting.	
	* Makefile: special installation of PPC files.

2000-05-25  Chmouel Boudjnah  <chmouel@mandrakesoft.com>

	* standalone/drakboot: Don't display Configure-/LILO/GRUB/ on
	alpha|sparc.

2000-05-25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* silo.pm: added configure_entry to try creating an initrd for an image
	entry in bootloader. fixed wrong usage of run_programm::rooted with 2>.
	* commands.pm: fixed insmod command to take modules64.cz* on sparc*
	* install2.pm: removed create boot disk and create auto install disk on
	sparc*. force writing of /etc/conf.modules for step setupBootloader.
	* install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*.
	* install_steps_interactive.pm: added missing $prefix for glob_. call
	configure_entry in setupSILO. fixed cancel or None entry on setupBootloader.
	* modules.pm: updated alias for sparc*.
	* any.pm: fixed proprable wrong test for setupBootloader in beginner at
	the very beginning.
	* printer.pm: fixed typo.
	* Xconfigurator.pm: avoid testing if using a Sun* server, added depth and
	resolution for these server too.

2000-05-24  Fran�ois Pons  <fpons@mandrakesoft.com>

	* partition_tabel.pm: fixed wrong detection of DOS partition on sparc*.
	* partition_table_sun.pm: fixed a bug when reading partition table
	with unused partition in the middle of the table.

2000-05-23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* common.pm: update arch to take into account sparc and sparc64. added
	better_arch and compat_arch function.
	* silo.pm: fixed adding new kernel automatically.
	* install2.pm: removed create boot disk stuff for sparc*.
	* install_steps.pm: added initrd generation for alpha. added ldconfig
	at end of installation. removed /usr/bin/dumpkeys existence test on
	sparc*, should be added in the future.
	* install_steps_interactive.pm: removed supermount for sparc*.
	* install_steps_gtk.pm: added /dev/kbd device creation and permedia2
	support for sparc*. removed screen limit of 1024x768.
	* detect_devices.pm: fixed problem on machine with really no IDE interface.
	* modules.pm: added support for 32 and 64 bit architectures on sparc*.
	* install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate
	partition.
	* pkgs.pm: added support for multi-arch rpm file (need for sparc*),
	fixed correctSize and invCorrectSize to take back a linear approximation
	above 9Gb approximatively. removed ftp rewind as broken currently.
	* keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed
	globing (removed) against existing '*'.
	* partition_table.pm: removed support for non SUN partition table, as it
	may freeze the kernel or may be blanked?
	* Xconfigurator.pm: take Sun24 server by default on sparc*, add support
	for permedia2 card (3DLabs server).
	* share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*.
	* Makefile: added support for modules and modules64 for sparc*.
	* c/stuff.xs.pm: added kernel_arch function for getting the current true
	architecture provided by the kernel (uname -m).

2000-05-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): the URL link to doc must
	be $lang/index.html, not only $lang.

	* standalone/mousedrake: add handling of XF86Config-4

	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)

2000-05-08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the touch of some files here to please linuxconf
	
	* install2.pm (miscellaneous): s/KBD/KEYBOARD/

	* lilo.pm (install_grub): don't keep symlinks for reiserfs
	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)

	* install_any.pm (getHds): default mount point for windobe in
	lowercased for StartOffice(!)

2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
	* keyboard.pm: Added new Lithuanian keyboard and changed the
	  string for brazilian ABNT-2 to state more clearly its ABNT nature
	  (it is not a standard PC keyboard; it uses some different keycodes)

2000-05-07  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): return availableCorrected
	instead of available

	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)

	* modules.pm (text2driver): same as text2lang below
	* keyboard.pm (text2keyboard): same as text2lang below
	* lang.pm (text2lang): replace the while (... each) by a foreach
	(keys) (because each is dangerous if loop is exited)

	* install_steps_interactive.pm (selectKeyboard): better handling
	of multiple langs question.

	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)

	* install_steps_interactive.pm (setup_thiskind): remove ide-*
	from modules displayed as loaded.

2000-05-06  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
	/usr) are not on not trueFS

	* any.pm (setupBootloader): add $prefix for the 2 glob_'s

2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua

2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* printerdrake.pm: fixed English error

2000-05-05  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): remove the special case
	for fbdev.

	* install_steps_interactive.pm (setup_thiskind): replace return by
	next in case load_module fails.

	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade

	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4

	* pkgs.pm (correctSize): updated for 7.1

	* install_any.pm (getAvailableSpace): move the removing of
	$minAvailableSize here.

2000-05-04  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (configurePrinter): give clicked to printerConfig

	* interactive.pm (ask_from_entries_ref): set default val if not_edit

	* interactive_newt.pm (ask_from_entries_refW): remove setting of
	default val. Now done in interactive::ask_from_entries_ref

	* interactive_gtk.pm (ask_from_entries_refW): handle empty value

	* modules.pm (read_already_loaded): ensure that already loaded
	modules are put in %loaded.
	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)

	* lilo.pm (install_lilo): truncate label's to 15 chars

	* install_any.pm (generate_ks_cfg): fix missing space
	* install_any.pm (generate_ks_cfg): fix bug for nfs comand

	* install2.pm: get rid of autoformat
	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat

2000-05-03  Pixel  <pixel@mandrakesoft.com>

	* any.pm (setupBootloader): replace ask_many_from_list by
	ask_from_list for bootloader choice

	* services.pm (drakxservices): stop immediately service if removed

	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
	* install_steps.pm (afterInstallPackages): touch some files to
	please linuxconf

2000-05-03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: updated min size, fixed kppprc generation.
	* install_any.pm: make sure postinstall-rpm is here before
	erasing (avoid error on reboot only).

2000-05-02  Pixel  <pixel@mandrakesoft.com>

	* raid.pm (format_part): don't call raid::make if part is already
	formatted (as raidstop fails)

	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
	more	

	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
	fail a simple warning.

	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
	* share/MonitorsDB: take new one from RedHat

	* standalone/drakboot: added kfloppy

	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
	not to have it)

2000-05-01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): remove
	NIS_server, use NIS instead
	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead

	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): fix yet another bug for
	ttf from windobe handling

	* install_steps_interactive.pm (selectInstallClass): hide beginner
	mode in corporate. Display special help.

2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
	text to be properly aligned (reported by Craig Chang
	<craig_chang@taipei.siscomm.com.tw>)
	* common.pm: now that po handling is correct, I changed the order
	of reading variables so that it follows the standards ($LANGUAGE first)
	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251

2000-04-28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps*.pm: added support for selection of package during
	upgrade the same way it is done for installation. added check of
	minimal size, abort else (at least let the user know about :-)
	fixed crypto if no network interface available.
	* install2.pm: fixed problem during upgrade that lost network
	configuration.

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_raw): don't call commands::insmod, do it in
	place. Merge with load_multi

	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
	symlinking	

	* Xconfigurator.pm (cardConfiguration): load module agpgart for
	i810
	
	* install_any.pm (getHds): changed the mount point setting for
	windows partitions as device_windobe is not unique

2000-04-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): changed to adapt to
	new hidden format

	* install2.pm (@installSteps): changed the way hidden is handled.
	Now it is a true perl expression (great power now)

	* install_steps_gtk.pm (selectInstallClass1): update steps window
	before asking normal/devel/server. Nicer!

	* install_steps_interactive.pm (configureNetwork): when "Cancel"
	pressed at network interface configuration do not skip all
	configuration.	

2000-04-26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm (pppConfig): modified a lot, removed template
	file for ifcfg and chat file.

2000-04-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
	the tree column (so that the checkbox are always visible without
	scrolling)	

	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
	to propose them in console
	
	* install_any.pm (relGetFile): added auto_inst to files to get
	from Mandrake/base

	* install2.pm (main): changed auto_inst behaviour

	* standalone/adduserdrake: fix a bug (s/$o/$in/g)

	* interactive_newt.pm (ask_from_entries_refW): now handling
	complete/changed/focus_out callbacks (at least more than before)	

	* Newt/Newt.xs: added rough callback handling

2000-04-25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added support for PPA more easily, allow
	printers entry using ppa driver event if pnm2ppa not installed,
	install it if neccessary after.
	* network.pm, install_steps.pm, install_steps_interactive.pm:
	added support for stoping a network interface, usefull for ppp0 to
	avoid using it too long.
	* install_steps.pm: fixed missing local on pap_secrets file.

2000-04-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install): moved the generation of the keytable here. It
	is used by both lilo & grub (lilo is not always installed as was
	assumed)	

	* common.pm (formatAlaTeX): remove bounding spaces

	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
	mark 25 in beginner
	* install_steps_interactive.pm (choosePackages): set $min_mark to
	25 in beginner

2000-04-24  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setupXfree): add a yesorno
	question for choosing between XF4 and XF3 in expert

	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window

	* install_any.pm (update_userkderc): make sure uid and gid are kept

	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert

	* partition_table.pm (add_extended): handle a 3rd arg,
	$extended_type to tell which kind of extended partition is wanted
	* partition_table.pm (adjust_main_extended): in non-expert,
	automatically set extended to linux-extended if there's only
	linux-type partitions.	

2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>

	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
	  and not for byte. RAM is expressed in megabytes -> MB

2000-04-19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
	* printer.pm: fixed wrong prototype of print_pages.
	* install2.pm: set version to 7.1 for crypto stuff.
	* crypto.pm: commented ackbar crypto site.

2000-04-17  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
	linuxconf)	

2000-04-14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): don't
	ask about checking bad blocks for reiserfs, cuz not handled

	* fs.pm (mount): reiserfs handling
	* fs.pm (format_reiserfs): added
	* fs.pm (write_fstab): add option "notail" for reiserfs if
	the partition holds the kernel (/boot or /)

	* partition_table.pm (isTrueFS): added, replaces most occurences
	of isExt2

2000-04-12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: force installation step if package have been
	selected on step choose packages.
	* install_any.pm: protected against die in perl (setstep or
	theme_changed).

2000-04-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* resize_fat: added some limits verification.
	* interactive_gtk.pm: corrected swap of arg with help adding.

2000-04-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
	which is used by printerdrake only. drops key bindings.

2000-04-07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/serial_probe: obsoleting pnp_serial which is now replaced
	by this one, taken from kudzu, really faster and probe all serial
	devices at one time. modified to probe correctly modem :-)
	* mouse.pm: updated to use serial_probe interface of
	detect_devices.pm.
	* detect_devices.pm: modified to use serial_probe, cache probed
	devices to avoid reprobing.

2000-04-06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps.pm: added support
	for peerdns options of ppp, so removed dns address unless expert.

2000-04-05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* crypto.pm, install_steps_interactive.pm, install2.pm,
	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
	and depslist-crypto. dependancies are not supported but with a
	simpler format of depslist file where closure are not done and
	only package name are used for dependancies.
	* pkgs.pm: added better support for multi CD manipulation,
	including selection and refus.

2000-04-04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: modified selection packages from compssList by
	incremental selection, much more quickly.
	added selected medium for selecting a package.
	* install_any.pm: refused media hash transfered to selected value
	of media table.
	@needToCopy list should only have package of default medium.

2000-04-03  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha

2000-03-31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: made changeMedium sub modification
	permanent.
	* pkgs.pm: modified upgrade to avoid use of header.

2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: some more choices for PPC keyboards

2000-03-30  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2pm: added eval around loading af_packet and postinstall
	copy of RPMS.
	* devices.pm: added /dev/kdb for SPARC.
	* install_any.pm: modified multi CD management, postinstall copy
	of RPMS.
	* install_steps_gtk.pm: added support for Xsun server for SPARC.
	* install_steps_interactive.pm: added multi CD dialog box for
	selecting CD available. Serialized ethernet configuration and ppp
	configuration.
	* pkgs.pm: added check for infinite recursion for bad depslist.
	* printer.pm: better test for reparse of printerdb.
	* Xconfigurator.pm: added support for Xsun server for SPARC.

2000-03-30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection

2000-03-29  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (wait_messageW): add some padding (nicer)

	* install_steps_interactive.pm (generateAutoInstFloppy): created,
	creates a floppy for auto installs.

	* install_any.pm (generate_ks_cfg): created, generates stage1
	ks.cfg file

	* share/po/DrakX.pot: added special comment for grub entry

2000-03-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): sort langs for
	many-lang install

	* mouse.pm (write): add WHEEL telling if a wheel mouse is there

2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added entries for all three Armenian keyboards

2000-03-26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (install_urpmi): full support for multi-hdlist's	

	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
	$prefix/var/lib/urpmi
	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
	fake name. Access via /tmp/$hdlist is given for non-fake name

	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)

2000-03-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm: updated to the new format of entries. It was an hash.
	Now the key is field kernel_or_dev, and entries is an array.
	
	(get): added, it returns the entry using a kernel
	   (needed because entries is no more a hash)

	* install_steps_interactive.pm (setupLILO): adapted to the new format

	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	

	* fsedit.pm (suggest_part): if suggested part contains a field
	"hd", ensure the partition is created on this hard drive

	* install2.pm (main): before leaving installation, remove
	/var/lib/urpmi if urpmi not installed	

	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
	of $size

2000-03-24  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
	(ultra66) without rebooting and making special floppy :)

	* lilo.pm (install_grub): much better grub configuration (better
	than lilo's :pp)

	* install_steps.pm (setupBootloaderBefore): remove entry floppy
	for security > 3

2000-03-23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): added, takes care of telling
	the X server if the user changed the mouse type. Only done if
	a serial mouse is chosen.

	* install_steps_newt.pm (doPartitionDisks): add a call to

	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
	devfs (it looses the symlink /dev/mouse)

2000-03-22  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry

2000-03-20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, fs.pm, install_any.pm: added supports for
	LS-120 floppy drive and icons on desktop of KDE (untested).
	* printer.pm, printerdrake.pm: added supports for PPA interface in
	new rhs-printfilters, always enable "Print text as postscript"
	option for such printers.

2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: changed XKB name for Swedish keyboard
	  changed XKB names for Russian and German keyboards
	  added a choice for "Croatian" keyboard
	* share/compss{,List}: added various new locales-*, ispell-* 
	  and netscape-* files. changed ppa to pnm2ppa.

2000-03-17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added setup for all configured queue.
	* install_steps_interactive.pm: modified for retrieving packages
	or current configuration.
	* printer.pm: correction, tested retrieve of printer
	configuration without printtool comments in printcap file: added
	update of entry according to gsdriver used (untested again).
	* printerdrake.pm: better handling of cancel, manage of multiple
	queue definition together (as lp|My printer).

2000-03-16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: moved in printerdrake.pm the test
	of printer usage.
	* printerdrake.pm: heavy modification to handle multiple queue,
	corrected some bugs too, added much more features as printtool.
	* printer.pm: added more features for filter, allow printer to be
	retrieved without help of printtool id in printcap file (untested).

2000-03-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Loopback): handling of the file loopback: test
	existence of the file and take its size.

2000-03-14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: corrected for duplicate file on other CD.

2000-03-13  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (floppies): don't return hash but the device name

2000-03-13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm, install_any.pm: small correction for multiple media
	installation.
	* tools/syncrpms: added for handling synchronisation of multiple source
	rpm directories (and multiple target), include cleaning.
	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
	after normal packages installation (printer, network, X11...), may
	be used to duplicate on other CD some important stuff of the first
	one.

2000-03-12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): compute the
	max_size very simply (sum of all package sizes), otherwise too costly

	* pkgs.pm (install): call cleanHeaders at the end
	* pkgs.pm (cleanHeaders): created

	* install2.pm (miscellaneous): /etc/msec/init.sh is now
	/usr/sbin/msec (yoann thanks for not telling :pp)

	* pkgs.pm (install): remove the $prefix of mountpoints for not
	enough room to install error message

2000-03-11  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_create_window): add callback on focus to
	ensure_focus. The result is no more 3 focus states with 2 buttons.

	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling

	* raid.pm (make): check the result of mkraid. Suggest raidtools
	are missing in standalone diskdrake

	* devices.pm (set_loop): created, searches for an available
	loopback and sets the file to it

	* lilo.pm (dev2grub): fixed a missing slash

	* interactive_gtk.pm (wait_message_nextW): do not update if same
	message, otherwise silly gtk won't do anything and we'll wait
	forever :(

2000-03-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account multiple media
	installation.

2000-03-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (@install_classes): cleanup, no more i18n (is now in
	install_steps_interactive), remove old entries

2000-03-09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): don't add alias block-major-11 in every case
	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)

	* fs.pm (format_*): move the @options before the device

	* loopback.pm: created, added a lot of stuff for loopback in
	diskdrake.pm, fs.pm...

2000-03-08  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: %type2fs replaced ox402 by 0x402

	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")

	* install_any.pm (install_urpmi): update for new hdlist.cz2

2000-03-07  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/

	* install_steps_interactive.pm (addUser): force add a normal user
	for security 4

2000-03-05  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
	(tis the Gtk-Perl 0.7002 was of doing)

2000-03-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): add ide-floppy to the modprobes of
	post-install supermount

2000-03-03  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (ps): add RSS to ps command

2000-03-02 Adam Lebsack <adam@mandrakesoft.com>

	* mouse.pm: added mac mouse detection to mouse::detect.
	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.

2000-03-01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account smaller
	transaction during installation.
	still a lot of test to perform, no provides updated currently and
	building of hdlist.cz2 and depslist.ordered need old files...
	nothing done for hdlist.gz during post installation, but
	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
	installation of packages as extract_archive need a true file].

2000-03-01  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install_grub): creation

	* network.pm (write_interface_conf): ONBOOT = !pcmcia

	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler

2000-02-29  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: moved common network stuff from "net" to "network"
	(modules like nfs lockd...)

	* fs.pm (write_fstab): moved the sort to the right place

	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
	set LANGUAGE=C before

	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
	be a decimal value :)

	* install_steps_gtk.pm (create_logo_window): set_name logo for
	logo window
	* share/install.rc: force disabling of background image theme

	* install_steps_gtk.pm (enteringStep): add step information for
	console 1

	* any.pm (addKdmIcon): new function
	* install_steps.pm (addUser): handle field icon
	* install_steps_interactive.pm (addUser): add choice of kdm icon
	* standalone/adduserdrake: add choice of kdm icon

	* diskdrake.pm (ask_all_data...): change for easier i18n

	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
	(need cleaning?)
	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
	option in expert
	* install2.pm (miscellaneous): add CLEAN_TMP option for
	/etc/sysconfig/system	

	* install_steps_interactive.pm (miscellaneous): forbidden
	useSupermount if high security.	

	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)

2000-02-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
	800x600.	

	* partition_table_raw.pm (get_geometry): when the
	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave

	* install2.pm (main): use modules::load_multi to increase boot
	start time

	* modules.pm (load_multi): added this function for loading many
	modules at once.

	* install_steps_gtk.pm (new): increase time before timeout

	* detect_devices.pm (cdroms): change the device associated with
	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	

	* modules.pm (write_conf): sort scsi_hostadapter's

2000-02-27  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): load ide-probe and the like in 'prereq' type
	so no aliases are added to conf.modules

2000-02-25  Pixel  <pixel@mandrakesoft.com>

	* devices.pm (make): small code cleanup

	* partition_table_raw.pm (adjustEnd): more explicit error message

	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
	big after each allocation) making adjustEnd cry

2000-02-24  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (new): added the "new" method to initialize
	windowheight for isStandalone

	* install_steps_gtk.pm (new): returns undef in case no X server
	works	

	* install2.pm (main): moved the ejectCdrom from install_steps::END
	to here
	* install2.pm (main): fix the $SIG{SEGV} handler
	* install2.pm (main): added a "try again" in text install if the
	"new" fails

	* install_steps_interactive.pm (createBootdisk): fix an error for
	non fdX choice of floppy drive
	
	* install_steps_interactive.pm (setup_thiskind): remove the
	"defined @l"

2000-02-23  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (%suggestedPartitions): remove any /boot entries
	* install2.pm (selectInstallClass): removed the special code to
	/boot entries from suggestedPartitions for on non-intel (and it
	was buggy :)
	* fsedit.pm (@suggestions): remove the /boot entry
	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
	* fsedit.pm (suggest_part): remove the 1024 cylinder special case

	* install_steps_interactive.pm (setupLILO): replace linear option
	by lba32

	* lilo.pm (suggest): add lba32 by default

	* install_steps_interactive.pm (load_thiskind): moved the HPT
	stuff to install_any::ultra66 and call it.
	Add sound card configuration (3 lines :)

	* my_gtk.pm and interactive_gtk: resize the list and tree based on
	root window size

	* install_steps_gtk: $width and $height goes $::rootwidth and
	$::rootheight, also other dimensions goes global (main::)

	* commands.pm (strings): replace the typo \{$n,} by {$n,}

2000-02-23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* build_archive, extract_archive: changed format of TOC to speed
	up extraction of archive, now 5 to 6 times faster to read TOC :-)
	
2000-02-22  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: load "Cards" database only to translate NAME
	to fields. Added file CardsNames created from Cards using
	share/Cards2CardsNames. Kind of list of normalized NAMEs	

	* MonitorsDB: replace the ` ' separator for vendor by `|'

	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	

	* interactive_gtk.pm (ask_from_treelist): creation of
	ask_from_treelist. Usage is just the same as ask_from_list with
	one more argument (the separator eg: |, /)

2000-02-21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed deadlock while trying to create partition
	when available space is equal or less than 2 cylinders. fixed
	Create action on corrupted partition by removing stalling window.
	Blocked partition table writing if there are error by forcing user
	to correct partition table.
	* partition_table.pm: fixed typo in verifyParts with cdie, added
	verifyParts on Resize action.
	
2000-02-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_big_help): display the help in full
	screen	

	* my_gtk.pm (_create_window): add big help on F1

	* common.pm (add2hash): now returns the first parameter

	* mouse.pm (detect): really defaults to serial mouse

	* interactive.pm: add ask_many_from_list_with_help and
	ask_many_from_list_with_help_ref

	* services.pm: creation, it handles what was in
	standalone/drakxservices

2000-02-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
	"/dev/psaux" and not "psaux")

	* diskdrake.pm (Create): show start sector even for non-expert on
	non-i386

2000-02-16  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): add defaults to serial mouse

	* install_steps_gtk.pm (createXconf): remove the defaults to
	serial mouse

2000-02-15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: "After %s partition %s," inlined otherwise does
	not please pablo and translators...

2000-02-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): hide start sector choice for non-expert

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm (get_geometry): do not use the cylinder
	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
	the total_sectors using HDIO_GET_IDENTITY

	* c/stuff.xs.pm: added total_sectors (gives the number of sector
	of a drive)

	* modules.pm (load): ignore error in loading prereq's
	
	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
	z85230 added

	* commands.pm (mount): add modules::load_deps otherwise the
	fs::mount won't succeed insmoding vfat if needed

2000-02-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* fixed diskdrake to handle limit case when creating and resizing
	partition table, address size limit and start sector limit.

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): add a callback on SEGV
	-> message printed
	-> that way, ENDs are called (otherwise skipped)

	* install_steps_interactive.pm (setup_thiskind): handles the undef
	value returned by load_thiskind
	
	* install_steps_interactive.pm (exitInstall): do not call
	install_steps::exitInstall

	* install_steps (exitInstall): removed
	* install_steps (END): added (it does ejectCdrom)

	* install_steps_interactive.pm (load_thiskind): returns undef if
	error loading a module

	* fs.pm (format_part): changed the prototype from $;$@ to $;@
	otherwise, @options always have a value (mostly undef) and mkdosfs
	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)

	* install_steps_interactive.pm (setup_thiskind):
	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
	(that way no pci probe the second time)

2000-02-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* heavy modification of build_archive and extract_archive to manage
	a TOC directly in archive file, handle bzip2 or gzip compression,
	extract_archive can extract multiple files a time, with minimal
	invocation of uncompress program and follow symlink and expand
	directory contents.
	* use build_archive/extract_archive for locales.
	* fixed a min/max in install_steps_gtk for Resize/Create partition.
	* fixed adjustEnd with dos partition table, take care of magic 63
	sectors at beginning of partitions, a more solid method should be
	used for that.

2000-02-10  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"

2000-02-09  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (add): cdie if maximum number of partitions
	handled by linux is reached

	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
	card or server found

	* install_any.pm (relGetFile): for mdkinst files, take care not to
	have a double '/' (see debbugs #591)

	* install_steps_interactive.pm (configureNetwork):
	purpose: add ability to configure both modem and lan
	         clean up the behaviour

	* fs.pm (write_fstab): 
	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
	also: rewrite of the part writing the fstab.