2001/02/02 dam's * interactive_gtk.pm, standalone/draknet, netconnect.pm, my_gtk.pm, standalone/diskdrake: recoded wizard mode corrected some stuff. trying not to break draknet for cooker snapshot 2001/02/02 Pixel * Xconfigurator.pm (monitorConfiguration): better default for DDC probe fails and auto_install and not provided any info about the monitor * install_any.pm (setPackages): in auto_installs, default to all groups chosen, unless compssUsersChoice exist. Won't change anything unless compssListLevel is used of course * share/locales.tar.bz2: yet another LC_NUMERIC, seems like the previous i chose was glibc-2.1 :-( this one en_US and seems all right! * Xconfigurator_consts.pm: add low_default_monitor for default of auto_installs * Makefile, partition_table.pm, pkgs.pm, partition_table_raw.pm, diskdrake.pm: using the new formatXiB * install_steps.pm (configureXBefore): set XKB_IN_USE=no if !$has_xkb in /etc/sysconfig/i18n * common.pm (formatXiB): created, format a number in human readable format * mdk-stage1/disk.c (try_with_device): bloody guillaume changed /tmp/hdimage to /tmp/disk without even telling, changing it back as i don't see any good reason for the move. 2001/02/01 dam's * standalone/draknet: new draknet snapshot. Still unuseable * interactive_gtk.pm, netconnect.pm, my_gtk.pm: updated embedded mode in install. 2001/01/31 dam's * standalone/draknet: corected translation and conflict. 2001/01/31 Franois Pons * modules.pm: added missing die if modprobe failed on live upgrade. * pkgs.pm: added rpmrebuilddb directory cleaning before, remove old rpm file if everything has been successfull. * install_steps.pm: changed to clean selection for non expert as used for group selection because it is not cleaned, need better solution TODO. 2001/01/31 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * standalone/draknet: Fixed English typos (in English you DON'T PUT SPACES BEFORE COLON (:); and it is "Profile" and not "Profil") CV: ---------------------------------------------------------------------- 2001/01/31 Pixel * install_steps_interactive.pm (choosePackagesTree): created, simple ask_many_from_list to choose individual packages (choosePackages): log for debug (choosePackages): don't ask to install in beginner. Max is chosen (setRootPassword): help not based on installClass being server or not (selectInstallClass): remove installClass choice (was normal/devel/server) (chooseGroups): fix for individual package selection flag * netconnect.pm (get_net_device): more cleanup syntax (get_net_device): cleanup syntax * install_steps.pm (selectLanguage): warning for debug (miscellaneousBefore): don't use installClass to decide to use supermount or not. Choice is done on $::corporate. Can't say "no supermount in server installs" anymore (selectInstallClass): emptied (setupSCSI): don't configure PCMCIA if there is no PCMCIA * install_any.pm (g_auto_install): installClass removed (setPackages): do not preselect compssUsers entries * install2.pm (main): don't set installClass=normal meta_class desktop (deprecated) (miscellaneous): TYPE= removed (was installClass) (selectInstallClass): don't set $o->{partitions}. diskdrake will have to ask in a set of possibilities ($o): replace fclass by fbeginner and fexpert ($o): default security level to 2 since it can't be based on installClass (deprecated) * install_steps_gtk.pm: restore window size for time being * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate * Xconfigurator.pm (main): better error message for auto_install failing * interactive.pm (ask_many_from_list): fix sorting * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by drakx. Still need finding the guilty 2001/01/31 Pablo Saratxaga * keyboard.pm: more kbd corrections fixed soem keybopard values 2001/01/31 Pixel * install_steps_interactive.pm (choosePackagesTree): created, simple ask_many_from_list to choose individual packages (choosePackages): log for debug (choosePackages): don't ask to install in beginner. Max is chosen (setRootPassword): help not based on installClass being server or not (selectInstallClass): remove installClass choice (was normal/devel/server) (chooseGroups): fix for individual package selection flag * install_steps.pm (selectLanguage): warning for debug (miscellaneousBefore): don't use installClass to decide to use supermount or not. Choice is done on $::corporate. Can't say "no supermount in server installs" anymore (selectInstallClass): emptied (setupSCSI): don't configure PCMCIA if there is no PCMCIA * install_any.pm (g_auto_install): installClass removed (setPackages): do not preselect compssUsers entries * install2.pm (main): don't set installClass=normal meta_class desktop (deprecated) (miscellaneous): TYPE= removed (was installClass) (selectInstallClass): don't set $o->{partitions}. diskdrake will have to ask in a set of possibilities ($o): replace fclass by fbeginner and fexpert ($o): default security level to 2 since it can't be based on installClass (deprecated) * install_steps_gtk.pm: restore window size for time being * pkgs.pm (psUpdateHdlistsDeps): also copy rpmsrate * Xconfigurator.pm (main): better error message for auto_install failing * interactive.pm (ask_many_from_list): fix sorting * any.pm (set_autologin): log to ensure AUTOLOGIN is not badly set by drakx. Still need finding the guilty 2001/01/30 dam's * standalone/draknet: new draknet. unstable * netconnect.pm: updated debugged network card configuration after pixelisation. 2001/01/30 Guillaume Cottenceau * mdk-stage1/stdio-frontend.c, mdk-stage1/newt-frontend.c: prevent from trying to set progressbar to more than 100% (rescue is more compressed than drakx) * share/rpmsrate: add ldetect to config stuff I want to have on all installs (lspcidrake) 2001/01/30 Pixel * install_steps_interactive.pm, netconnect.pm, install_interactive.pm: adapt format functions given to ask_from_listf. $_ is no more set * mouse.pm (detect): replace commands::modprobe by modules::load as it should (or??) * perl2etags: adapt to new etags (emacs 21) format * raid.pm (make): replace commands::modprobe by modules::load as it should (or??) * perl2fcalls (@exclude_calls): add Eth as dam's use it quite a lot in his regexps * share/locales.tar.bz2: misc/LC_NUMERIC tells to use "," as number separator instead of ".". The sheer result is: "0.6" * 10 gives 0 "0,6" * 10 gives 6 So i have overwritten misc/LC_NUMERIC with /usr/share/locale/en/LC_NUMERIC and it works nicely now :) 2001/01/29 dam's * standalone/drakboot: corrected typo 2001/01/29 Guillaume Cottenceau * modules.pm: - deprecate "hdreiser.img" since we have room for "reiserfs.o" in "hd.img" - following deprecation of "other.img", reintegrate big modules in relevant boot disks 2001/01/29 Pablo Saratxaga * lang.pm, share/po/et.po: updated Estonian file 2001/01/29 Pixel * detect_devices.pm (getCompaqSmartArray): /proc/array/ida0 can contain more than one ida/c0d0p* 2001/01/28 dam's * share/help.xpm, network.pm, ChangeLog, netconnect.pm: updated 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): fixed horrible bug causing reiserfs partitions not to be displayed/asked for formatting. The default value being used. * any.pm (get_autologin): adapt to new format of sysconfig/desktop 2001/01/28 siegel * share/po/de.po: new german version 2001/01/26 dam's * interactive_gtk.pm: updated embedded mode * standalone/drakboot: added embedded mode 2001/01/26 Guillaume Cottenceau * mdk-stage1/dietlibc/include/stdio.h: adjust include files to compile bzlib * mdk-stage1/stage1.c: restore passing of pcmcia info to stage2 * mdk-stage1/bzlib/compress.c, mdk-stage1/bzlib/bzlib.c, mdk-stage1/bzlib/randtable.c, mdk-stage1/bzlib/huffman.c, mdk-stage1/modules.c, mdk-stage1/bzlib/crctable.c, mdk-stage1/bzlib/decompress.c, mdk-stage1/bzlib/Makefile, mdk-stage1/bzlib/bzlib_private.h, mdk-stage1/tools.c, mdk-stage1/Makefile, mdk-stage1/bzlib/blocksort.c: - use bzlib instead of zlib to reduce overall size - take home my own bzlib code to (1) reduce code size with good compile options (2) make it compile and link against dietlibc * mdk-stage1/mar/mar-extract-only.c, mdk-stage1/mar/mar-extract-only.h, mdk-stage1/mar/mar-frontend.c, mdk-stage1/mar/mar.h, mdk-stage1/mar/Makefile: mar now uses bzlib, no more zlib * mdk-stage1/pci-resource/update-pci-ids.pl: comply to new "mar -l" format 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/26 siegel * share/po/de.po: . 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/26 Pixel * install_steps_gtk.pm (installPackages): prepare for advertising... * interactive_newt.pm (ask_from_entries_refW): major rework for new format, still need work (ask_from_entries_refW): use NEWT_FLAG_PASSWORD (aka 1<<11) instead of NEWT_FLAG_HIDDEN (myTextbox): wrap the text if needed (myTextbox): use a vertical scrollbar if needed * Newt/Newt.xs (newtFormAddGrid): new name for newtGridAddComponentsToForm, swap parameters for much better understanding (newtListboxGetCurrent): returns a SV (together with newtListboxAddEntry) (newtListboxAddEntry): data is now a SV 2001/01/25 dam's * install2.pm: disable steps 'packages choice', 'configure X', and 'configure' 'printer' * install_steps_interactive.pm: don't oblige user addition * network.pm: display ethernet module * netconnect.pm: network informations filled into $prefix/var/lib/naat/configuration 2001/01/25 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: restore symlink /sbin/sh -> /usr/bin/sh for stage2 * mdk-stage1/probing.h: better tightness of probing stuff * mdk-stage1/probing.c: better tightness of probing stuff print warning message when insmod of PCI-detected device fails * mdk-stage1/stage1.c: - mdk-stage1: now linux-2.4 uses floppy.o to access floppy drives - remove fat/vfat modules from some boot floppies now that we don't need it anymore * mdk-stage1/pci-resource/update-pci-ids.pl: re-integrate autoprobe of tulip network cards, kernel-2.4 has strange way to classify some of its net modules.. 2001/01/25 Pablo Saratxaga * share/po/it.po: Waw, italian translator is very fast :) updated Indonesian and Italian fiels * share/po/id.po: updated Indonesian and Italian fiels * share/locales.tar.bz2: added iso9 locale definitions * lang.pm: fixed LANGUAGE for mk locale 2001/01/25 Pixel * install_any.pm (spawnShell): fix error message 2001/01/24 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: - clean up deprecated symlinks (insmod, rmmod, cardmgr) - remove unecessary device files * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia 2001/01/24 Pixel * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun * install_steps.pm (afterInstallPackages): cleanup * interactive.pm: better documentation of ask_from_entries_refH features (entry) 2001/01/24 Guillaume Cottenceau * mdk-stage1/stage1-data/stage1.tar.bz2: - clean up deprecated symlinks (insmod, rmmod, cardmgr) - remove unecessary device files * mdk-stage1/pcmcia/cardmgr.c, mdk-stage1/pcmcia/lex_config.c, mdk-stage1/pcmcia/vg468.h, mdk-stage1/pcmcia/cardmgr.h, mdk-stage1/pcmcia/bulkmem.h, mdk-stage1/pcmcia/i82365.h, mdk-stage1/pcmcia/cirrus.h, mdk-stage1/pcmcia/driver_ops.h, mdk-stage1/pcmcia/config.h, mdk-stage1/pcmcia/version.h, mdk-stage1/pcmcia/cistpl.h, mdk-stage1/stage1.c, mdk-stage1/pcmcia_config.patch, mdk-stage1/pcmcia/cs.h, mdk-stage1/pcmcia/Makefile, mdk-stage1/pcmcia/ds.h, mdk-stage1/pcmcia/pcmcia.h, mdk-stage1/pcmcia/cs_types.h, mdk-stage1/pcmcia/yacc_config.c, mdk-stage1/Makefile, mdk-stage1/pcmcia/tcic.h, mdk-stage1/pcmcia/yacc_config.h, mdk-stage1/pcmcia/pcmcia_probe.c: stage1: add pcmcia 2001/01/24 Pixel * partition_table.pm (%types): s|Compaq|Compaq/HP| per request of fpitoun * install_steps.pm (afterInstallPackages): cleanup * interactive.pm: better documentation of ask_from_entries_refH features (entry) 2001/01/23 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Greek file 2001/01/22 dam's * install_steps_interactive.pm, netconnect.pm: corrected slide bar, and added network conf save in /root/networking.tmp 2001/01/22 Guillaume Cottenceau * mdk-stage1/network.c: add automatic support in choice of NET device, in case of multiple NET devices consistent dot-terminated error messages, consistent no-dot log messages re-put Netmask input per default (void entry -> automatic guess) * mdk-stage1/stage1.c, mdk-stage1/dhcp.c, mdk-stage1/modules.c: consistent dot-terminated error messages, consistent no-dot log messages 2001/01/22 Pablo Saratxaga * share/po/id.po: updated Indonesian file * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/pl.po, netconnect.pm, share/po/no.po, share/po/fi.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated po files * share/po/wa.po: updated po files updated pot file * install2.pm, lang.pm: fixed the places where console fonts and related files are put under /etc/sysconfig to the places really used by console-tools * share/po/DrakX.pot: updated pot file * share/po/hr.po: updated po files updated Croatian file 2001/01/22 Pixel * pkgs.pm (read_rpmsrate): if $packages is undef, ignore it. That way, read_rpmsrate can be called standalone. * network.pm, install_steps_interactive.pm, netconnect.pm, my_gtk.pm, install_interactive.pm, install2.pm, partition_table.pm, install_any.pm, any.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: $::beginner is deprecated, replaced by !$::expert 2001/01/21 Guillaume Cottenceau * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in network/ftp installs 2001/01/21 Pixel * interactive_gtk.pm (create_ctree): fix case with formatted list 2001/01/21 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's * mdk-stage1/url.c, mdk-stage1/network.c: allow providing void password in network/ftp installs 2001/01/21 Pixel * interactive_gtk.pm (create_ctree): fix case with formatted list 2001/01/21 Guillaume Cottenceau * mdk-stage1/stage1.c, mdk-stage1/nfsmount.c: fix remaining perror's 2001/01/21 Pablo Saratxaga * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files 2001/01/21 Guillaume Cottenceau * mdk-stage1/nfsmount.c: fix remaining perror's * mdk-stage1/stage1.c: fix remaining perror's - better msg in fatal errors - do not include code to spawn a shell for releases 2001/01/21 Pablo Saratxaga * share/po/pt_BR.po, share/po/da.po: updated Danish and Brazilian files 2001/01/21 Pixel * install_steps_interactive.pm (selectMouse): use ask_from_treelist_ * interactive.pm (ask_from_treelist_): created, split with the separator, call translate on words, then re-join. 2001/01/19 Franois Pons * install_any.pm: fixes for CD not changeable. * install_steps_interactive.pm: fixed unselect group and inoperant individual package selection. removed expert mode and install class. 2001/01/18 Franois Pons * install_steps.pm: fixed obligation of relative large install, now minimum is lesser. * install_steps_gtk.pm: make sure no ratio above 1 can occur, still need to see why as it happens on install-abort-choices-install or install-abort-choices-fs-format(none)-choices-install * live_install: update live install to match /tmp/image instead of /tmp/rhimage. 2001/01/17 Franois Pons * install_steps.pm, install_any.pm: fixes with /tmp/rhimage and /tmp/image. * pkgs.pm: update to use new header file format in hdlist (added arch) but depslist has not it... * install2.pm: fixes with /tmp/rhimage and /tmp/image 2001/01/16 Pablo Saratxaga * share/po/bg.po: updated bulgarian file 2001/01/12 Guillaume Cottenceau * mdk-stage1/url.c: use strrchr instead of doing it by hand * mdk-stage1/insmod-busybox/busybox.h, mdk-stage1/insmod-busybox/utility.c, mdk-stage1/insmod-busybox/insmod.c: - replace remaining perror's with log_perror's - little code cleanup * mdk-stage1/stage1-data/stage1.tar.bz2, mdk-stage1/stage1-data/stage1-with-sash.tar.bz2: add /dev/fd0 * mdk-stage1/stage1.c, mdk-stage1/modules.h, mdk-stage1/tools.c, mdk-stage1/tools.h, mdk-stage1/disk.c, mdk-stage1/modules.c: - add load of third party modules in Expert mode (PS rulz) 2001/01/12 siegel * share/po/de.po: updates 2001/01/12 Franois Pons * install_steps_interactive.pm: fixed addUser for invocation of any::ask_users. fixed bad invocation of installation of X server. 2001/01/12 Guillaume Cottenceau * mdk-stage1/cdrom.c: add more memory carefulness with CDROM install - add wait_message for initializing of CDROM's (it can be long when it's SCSI) - print CDROM drive names (model) in dialogs * mdk-stage1/mount.c, mdk-stage1/lomount.c, mdk-stage1/disk.c: - fix behaviour with bad ISO images (DISK installs) - better dialogs for DISK installs 2001/01/12 Pablo Saratxaga * lang.pm: make lang list in format for tree-selector 2001/01/11 Guillaume Cottenceau * mdk-stage1/disk.c: fix failing umount for DISK installs in some failing loopback situations act nicely when no partitions are found on some disk * mdk-stage1/modules.h: polish generic blank.img situation (no modules and/or modules.dep available) * mdk-stage1/lomount.c: fix failing umount for DISK installs in some failing loopback situations better log messages continue anyway when insmod'ing of modules fail (for blank.img) * mdk-stage1/probing.c: close some fd's * mdk-stage1/stage1.c, mdk-stage1/modules.c: polish generic blank.img situation (no modules and/or modules.dep available) continue anyway when insmod'ing of modules fail (for blank.img) 2001/01/11 Guillaume Cottenceau * mdk-stage1/Makefile, mdk-stage1/disk.c: - add DISK install from ISO image file - add FTP - add HTTP - use single place for mountpoints and static directories * mdk-stage1/hack, mdk-stage1/lomount.c, mdk-stage1/lomount.h: - add DISK install from ISO image file * mdk-stage1/stage1.c, mdk-stage1/config-stage1.h, mdk-stage1/stage1.h, mdk-stage1/tools.c, mdk-stage1/stdio-frontend.c, mdk-stage1/cdrom.c, mdk-stage1/tools.h, mdk-stage1/newt-frontend.c, mdk-stage1/network.c: - add FTP - add HTTP - use single place for mountpoints and static directories * mdk-stage1/insmod-busybox/Config.h: tweak config 2001/01/11 Pixel * standalone/adduserdrake: adduserdrake may handles autologin * install_steps.pm (addUser): set autologin * install2.pm (addUser): moved setAuthentication to install_steps::addUser * install_steps_interactive.pm (addUser): fix 2001/01/11 dam's * install_steps.pm, install_steps_interactive.pm, ChangeLog, netconnect.pm: updated 2001/01/11 Guillaume Cottenceau * mdk-stage1/pci-resource/update-pci-ids.pl: remove nasty messages when mar or marfiles not available to perform consistency check 2001/01/11 Pixel * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * interactive_gtk.pm (create_ctree): fix default value selecting failing (in case of "format") (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/11 Pixel * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/11 Pixel * Xconfigurator.pm (autologin): moved to package any * interactive_gtk.pm (ask_from_entries_refW): apply "format" on label when icon is missing for iconlist (ask_from_entries_refW): handle "canceled" callback. Permits to overrule the cancel. * install_steps.pm (configureX): call directly $o->pkg_install, no need to add 'XFree86-' at the beginning (addUser): use any::write_passwd_user (setRootPassword): use any::write_passwd_user (configureX): fix bad $install given to Xconfigurator::main * any.pm (write_passwd_user): add or update an entry in /etc/passwd (ask_users): created, interactively ask users to add (used in adduserdrake and install) (allocUsers, addUsers): changed the prototype (setupBootloader): grep out fat partitions for the "Boot device" propositions (people are too stupid) * my_gtk.pm (main): third argument is a function to call before leaving in case of "cancel" clicked. * install_any.pm (g_auto_install): deep copy of $o->{users} because we're modifying it * Makefile.config (STANDALONEPMS): remove netdrake (which is deprecated) * install_steps_interactive.pm (addUser): use any::ask_users * standalone/adduserdrake: use any::ask_users * Xconfig.pm (getinfoFromDDC): removed devices::make("/dev/zero") (now in install2::main) * install2.pm (main): move devices::make("/dev/zero") needed by ddcxinfos here * interactive.pm (ask_from_entries_refH_powered_normalize): "canceled" callback defaults to "sub { 0 }" 2001/01/10 Guillaume Cottenceau * mdk-stage1/dietlibc/dietfeatures.h: tweak dietlibc config to get minimal size * mdk-stage1/dietlibc/lib/vsscanf.c, mdk-stage1/dietlibc/lib/ttyname.c: remove warnings from compile 2001/01/10 Pixel * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' callback on clist/list/ctree * install_steps.pm (addUser): use any::pack_passwd (setRootPassword): use any::unpack_passwd and any::pack_passwd * Xconfigurator.pm (cardConfiguration): adapt for $install which is generic (autologin): use $install which is now generic * install_steps_interactive.pm (selectLanguage): many_languages choice moved there as advanced * my_gtk.pm (create_packtable): yet another try to have something nice :) !! uses Gtk::Table::attach_raw which is available in perl-GTK-0.7004-6mdk !! (create_box_with_title): with the size given to set_usize for the scroll containing the text widget in case of long text. and don't let the scroll grow. (gtktext_insert): remove adding an ending "\n" (no more needed?) * any.pm (setAutologin): cleanup (pack_passwd, unpack_passwd): created 2001/01/10 dam's * install_steps_interactive.pm: corrected last message . firewall 2001/01/10 Guillaume Cottenceau * modules.pm: fix modules.pm for modules to be skept in stage1 (ppa, imm, parport*, plip) 2001/01/10 Pixel * interactive_gtk.pm (ask_from_entries_refW): add handling of 'changed' callback on clist/list/ctree * install_steps.pm (addUser): use any::pack_passwd (setRootPassword): use any::unpack_passwd and any::pack_passwd * my_gtk.pm (create_packtable): yet another try to have something nice :) !! uses Gtk::Table::attach_raw which is available in perl-GTK-0.7004-6mdk !! (create_box_with_title): with the size given to set_usize for the scroll containing the text widget in case of long text. and don't let the scroll grow. (gtktext_insert): remove adding an ending "\n" (no more needed?) * any.pm (setAutologin): cleanup (pack_passwd, unpack_passwd): created * Xconfigurator.pm (cardConfiguration): adapt for $install which is generic (autologin): use $install which is now generic * install_steps_interactive.pm (selectLanguage): many_languages choice moved there as advanced * standalone/printerdrake, standalone/keyboarddrake, standalone/draknet2, standalone/livedrake, standalone/drakboot, standalone/draksec, standalone/netdrake, standalone/mousedrake, standalone/drakgw, standalone/drakxservices, standalone.pm, standalone/draknet, standalone/XFdrake, standalone/diskdrake, standalone/adduserdrake, standalone/drakxconf: use standalone and standalone::pkgs_install 2001/01/09 Pixel * any.pm (drakx_version): nicer (4gc) * install2.pm (main): log::l the drakx_version * my_gtk.pm (create_packtable): no_expand option added * interactive.pm (ask_from_entries_refH_powered_normalize): field "disabled" added, "advanced_messages" added * lang.pm (langs): created (transform the $o->{langs} hash ref in a list) (pack_langs): use lang::langs * install_steps.pm (selectLanguage): $o->{langs} is now a ref so initialize as such * Makefile (get_needed_files): generate /usr/share/VERSION which contains the version of ChangeLog (which is updated at each upload) * install_steps_interactive.pm (choosePartitionsToFormat): handle "check for bad blocks" as advanced (setRootPassword): remove choosing non-md5 or non-shadow passwords. * install_any.pm (setPackages): use lang::langs instead of using $o->{langs} as a array ref (it is not so anymore) (spawnShell): print the drakx_version 2001/01/08 Pixel * interactive.pm: fixes (ask_from_treelistf, ask_from_treelist): now use ask_from_entries_refH (ask_from_entries_refH_powered): remove "1;" (was there for debugging) * interactive_gtk.pm: fixes (ask_from_treelistW): removed (create_ctree): created, used for ``type => treelist'' entries * my_gtk.pm: fixes * ChangeLog: New snapshot uploaded 2001/01/07 Pablo Saratxaga * share/po/sr.po, share/po/sp.po, share/po/no.po, share/po/cs.po: updated Czech, Norwegian and Serbian files 2001/01/07 Pixel * install_steps_interactive.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered (selectLanguage, selectKeyboard): use ask_from_entries_refH instead of ask_from_listf_, it enables the use of advanced * any.pm, printerdrake.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered * interactive.pm: update code for new ask_from_entries_refH which doesn't handle optional ok/cancel names in arg 1. must be handled via ask_from_entries_refH_powered (ask_from_listf_no_check): replaces ask_from_list_no_check (ask_from_entries_refH_powered): sorts the list if needed or wanted * partition_table_raw.pm (test_for_bad_drives): created - ugly stuff needed mainly for Western Digital IDE drives - try writing what we've just read, yells if it fails - testing on last sector of head #0 (unused in 99% cases) * ftp.pm (getFile): make it work (it used to dead-loop when getFile'ing an non-existent file, stressing the ftp server :-/ ) for the moment, just release cdrom.img, hd.img and hdreiser.img others should should come... * install_steps.pm: for the moment, just release cdrom.img, hd.img and hdreiser.img others should should come... * interactive_gtk.pm (ask_from_listW): removed (create_list): calls "format" on list elems before prompting them (create_clist): created (ask_from_entries_refW): calls create_clist in case of list with no help * install_steps_gtk.pm (installPackages): autoflush stdout before beeping (installPackages): don't take into account the time when prompting the user * common.pm (may_apply): added * install_any.pm (getHds): test_for_bad_drives called on hard drives (getHds): ensure $o->{hds} is not set until the hard drives are checked 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * ChangeLog: New snapshot uploaded New snapshot uploaded 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * ChangeLog: New snapshot uploaded 2001/01/06 Pixel * keyboard.pm (setup): don't xmodmap if DISPLAY is unset * standalone/rpmdrake: deprecated (and has been for a long time now) * network.pm, install_steps_interactive.pm, netconnect.pm, install_interactive.pm, standalone/adduserdrake, any.pm, Makefile.config, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: ask_from_entries_refH parameter format has changed so change all accesses to it. 2001/01/05 Franois Pons * lang.pm, keyboard.pm: forget _exit in child process after a fork of DrakX removed need of packdrake binary * Xconfigurator.pm: use of SHARE_PATH for MonitorsDB, Cards+, CardsNames * live_install2: cleanup to keep libperl.so but the right one * live_install: no more copy of files on live system, now use environment variable by DrakX cleanup * perl2fcalls: added packdrake call (via new but incomplete) and package * install_any.pm, commands.pm, pkgs.pm: removed need of packdrake binary * netconnect.pm: fixed syntax error * modules.pm: eval insmoding ide-cd (just in case) removed need of packdrake binary 2001/01/05 Pablo Saratxaga * share/po/ja.po, share/po/ca.po, share/po/az.po: updated Azeri, Catalan and Japanese files 2001/01/05 Pixel * mouse.pm: help cperl-mode * interactive_gtk.pm, network.pm, install_steps_interactive.pm, my_gtk.pm, interactive.pm, printerdrake.pm, Xconfigurator.pm, diskdrake.pm: move to new ask_from's: - ask_from_entries_ref is deprecated, use ask_from_entries_refH - ask_from_list now calls ask_from_entries_refH_powered still not done: - ask_from_treelist should use ask_from_entries_refH_powered, and lists with no help should use CList (List is bad) - keyboard and mouse binding is still rough - enhance the look * keyboard.pm: add the percentage of each keyboard types (as a comment for now) 2001/01/04 dam's * netconnect.pm: cleaned... everything should be buggy. 2001/01/04 Franois Pons * pkgs.pm: fixed some old $p->{file} by new $p->[$FILE] code cleanup and fixes for lilo not upgrade 2001/01/04 Pablo Saratxaga * install_any.pm: fixed the functions doing the lists of languages * lang.pm: fixed the functions doing the lists of languages The list of languages now has complete locale names insted of just language code (that is needed to differentiate zh_CN and zh_TW among others) * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Brazilian file * share/po/eu.po: updated Basque file updated Brazilian file 2001/01/04 Pixel * Xconfigurator.pm: some pixelization using the new if_ * install_steps_interactive.pm (setRootPassword): fix pixelization keep $o->{langs} unpacked to simplify things if_ pixelization * common.pm (%EXPORT_TAGS): add if_ in "common" exported tags (if_): created. Use it to replace things like ($::expert ? $val : ()) by if_($::expert, $val) * keyboard.pm: nl keyboard is not used, so defaults to us_intl * lang.pm, install_steps.pm, pkgs.pm, install_any.pm: keep $o->{langs} unpacked to simplify things * netconnect.pm: quite a few clean-up (and buggying) 2001/01/03 dam's * install_steps_interactive.pm: admin user removed before beeing added * netconnect.pm: corrected typo LAN is configured with default value if firewall 2001/01/03 Franois Pons * diskdrake.pm: fixed invocation of change_type by clicking on legend unless expert * install2.pm: fixed usage with testing * install_steps.pm: fixed some other services to start in case something gets wrong, this fixes some deadlock on upgrade from 7.0. fixed usage with testing * partition_table.pm: fixed overlapping partitions between one extended and one regular primary. should be accepted (log printed instead of error) as diskdrake allow their creation in expert. 2001/01/03 Guillaume Cottenceau * modules.pm: add checks of dependencies on marfiles fix a couple of broken dependencies in modules.pm 2001/01/03 Pablo Saratxaga * lang.pm, share/locales.tar.bz2: locales in glibc 2.2 format 2001/01/03 Pixel * install2.pm (main): move the setting of PATH and spawnShell *after* setting $prefix 2000/12/31 Pablo Saratxaga * share/rpmsrate: added a few locales dependences 2000/12/29 Pixel * install_steps.pm (addUser): typo fix * ChangeLog: New snapshot uploaded * ftp.pm (getFile): recall getFile after rewindGetFile 2000/12/29 Pixel * install_steps.pm (addUser): typo fix * ftp.pm (getFile): recall getFile after rewindGetFile 2000/12/28 Pixel * Makefile: now /usr/lib/X11 is a relative symlink to please mirrors and jako 2000/12/26 Chmouel Boudjnah * keyboard.pm: Add the very ghost option REMOVE_MOD_META_L. 2000/12/26 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated Lithuanian file 2000/12/22 dam's * install_steps.pm, install_steps_interactive.pm: corrected admin user setting for firewall install. 2000/12/22 Franois Pons * modules.pm: fixed load_multi on live. added back all removed module with the new great mdk-stage1 of gg. 2000/12/22 Guillaume Cottenceau * modules.pm: make them work with kernel-2.4 by disabling non existent modules 2000/12/22 Pixel * interactive_gtk.pm, install2.pm: commit symlink /tmp/image /tmp/rhimage 2000/12/21 Pixel * ChangeLog: New snapshot uploaded 2000/12/21 dam's * install2.pm: firewall : automatic class set when firewall (beginner=0) * install_steps_interactive.pm: if firewall, admin password obliged * install_steps.pm: added setAdminpassword (a little bit redundant, sorry) * any.pm: corrected module stuff.. Thanx to pixel 2000/12/20 Pixel * install_steps_gtk.pm (selectMouse): unsure the device exists * unused/christmas-karaoke.patch: handle isa cards 2000/12/19 Pixel * ChangeLog: New snapshot uploaded New snapshot uploaded 2000/12/19 dam's * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/draknet3.xpm: added control-center. 2000/12/19 Pixel * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss * unused/christmas-karaoke.patch: Happy Christmas :) * install_any.pm: spawnShell: set DISPLAY, just in case :) * install2.pm: set PATH before doing spawnShell * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) * ChangeLog: New snapshot uploaded 2000/12/18 dam's * interactive_gtk.pm: added embedded support for control-center corrected embedded support. new control center and related * netconnect.pm: corrected typo corrected typo * standalone/drakxservices, standalone/control-center, ChangeLog, standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, standalone/drakboot: new control center and related * install_gtk.pm: added firewall support * install2.pm: included firewall handling changed firewall comportement * install_steps_interactive.pm: changed firewall comportement * modules.pm: corrected bad mergeinconf 2000/12/18 Pixel * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more cfI/xfI remove isdndb.net 2000/12/19 dam's * standalone/pixmaps/logo1.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/draknet4.xpm, standalone/pixmaps/draknet1.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/logo2.xpm, standalone/pixmaps/util6.gif, standalone/pixmaps/unknown.xpm, standalone/pixmaps/drakgw.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/draknet5.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/draknet2.xpm, standalone/pixmaps/logo3.xpm, standalone/pixmaps/util7.gif, standalone/pixmaps/port.xpm, standalone/pixmaps/draknet.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/isdn.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/draknet3.xpm: added control-center. 2000/12/19 Pixel * modules.pm: when loading /snd-card-/ module, load snd-pcm-oss * unused/christmas-karaoke.patch: Happy Christmas :) * install_any.pm: spawnShell: set DISPLAY, just in case :) * install2.pm: set PATH before doing spawnShell * Makefile: /usr/lib/X11 now exists on non-sparc (was only for sparc) 2000/12/18 dam's * interactive_gtk.pm: added embedded support for control-center corrected embedded support. new control center and related * netconnect.pm: corrected typo corrected typo * standalone/drakxservices, standalone/control-center, ChangeLog, standalone/XFdrake, standalone/draknet2, standalone/adduserdrake, standalone/drakboot: new control center and related * install_gtk.pm: added firewall support * install2.pm: included firewall handling changed firewall comportement * install_steps_interactive.pm: changed firewall comportement * modules.pm: corrected bad mergeinconf 2000/12/18 Pixel * Makefile, share/keymaps_generate: tar and bzip2 is cfj/xfj and no more cfI/xfI remove isdndb.net 2000/12/16 Pixel * standalone/mousedrake, standalone/drakgw: use ldetect-lst * Makefile.drakxtools: fix daminetsex use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * share/list: use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * any.pm: fix daminetsex * modules.pm, live_install, install2.pm, standalone/lspcidrake, pkgs.pm, mouse.pm: use ldetect-lst for usb => now auto detects mice types :) * c/stuff.xs.pm, detect_devices.pm: use ldetect-lst for usb => now auto detects mice types :) use ldetect-lst pci_probing now done by libldetect config files moved in package ldetect-lst * Makefile.config: fix daminetsex use ldetect-lst * Makefile: use ldetect-lst for usb => now auto detects mice types :) use ldetect-lst * netconnect.pm, share/CardsNames, c/Makefile.PL, Xconfigurator_new.pm, Xconfigurator.pm, share/Cards+, share/MonitorsDB, share/isdndb.net, share/Cards2CardsNames: pci_probing now done by libldetect config files moved in package ldetect-lst 2000/12/15 Pixel * Xconfigurator.pm: Cards+ and CardsNames are moved to ldetect-lst * install_steps.pm: clean all unneeded stuff 2000/12/14 dam's * any_new.pm, netconnect_new.pm: preparing for big jump. * netconnect.pm: Big jump. The *_new.pm are replaced by *.pm Everything should work, but you better test :) * standalone/control-center: big improvement and cosmetic changes a lot of improvement. Is able to launch multiples soft passing in arguments. new file. Its location should change soon. * any.pm: Big jump. The *_new.pm are replaced by *.pm Everything should work, but you better test :) corrected typo. 2000/12/14 Pixel * share/compssList: obsoleted by rpmsrate * share/rpmsrate: obsoletes compssList * share/compssUsers, install_steps.pm, install_steps_interactive.pm, Makefile, install_steps_gtk.pm, install2.pm, pkgs.pm, install_any.pm: move from compssList to rpmsrate * Newt/Newt.xs: cleanup (use of alloca to pass parameters) 2000/12/13 Pablo Saratxaga * share/po/it.po: updated Italian file 2000/12/12 dam's * netconnect.pm: typo + if firewall, don't display 'disable network' * standalone/draknet2: new version... still working on it * ChangeLog: commit * share/themes-mdk-Firewall.rc: added firewall theme * modules.pm: my fault, corrected renaud's patch incorporation * share/logo-mandrake-Firewall.xpm: new logo 2000/12/12 Franois Pons * share/list: added packdrake.pm as packdrake has been splited. * pkgs.pm: fixed versionCompare to always return number. added checking of version to select obsoletes on upgrade. 2000/12/11 Franois Pons * install_any.pm: Radeon uses 3D now. * lang.pm: fixed write_langs for upgrade. i18n sucking fixes. * Xconfigurator.pm: Radeon uses 3D hw accel theoritically now. 2000/12/09 Pablo Saratxaga * lang.pm: Added configuration of Vietnamese input server 2000/12/09 Pixel * standalone/adduserdrake: remove debugging code * install2.pm (selectInstallClass): give $clicked to selectInstallClass * interactive_newt.pm (ask_from_entries_refW): reset all hidden entries to null in case of error on hidden entry cuz newt doesn't display null entries, disturbing * install_steps_interactive.pm (formatMountPartitions): the format partition dialog created at first use, so that it doesn't appear if no partitions are formatted. (selectInstallClass): ensure expert choice is kept if it was prechosen (selectInstallClass): if expert pre-chosen, ensure expert is kept * interactive_gtk.pm, install_steps.pm: small renicing 2000/12/08 Franois Pons * pkgs.pm: fixed bug in list of packages provided by another one. 2000/12/08 Pablo Saratxaga * share/po/pt_BR.po, share/po/no.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/wa.po, share/po/da.po, share/po/de.po, share/po/az.po, share/po/tr.po: updated Brazilian file 2000/12/08 Pixel * install2.pm (main): warn if VERSION file doesn't exist (formatPartitions): call rotate_logs after mounting the partitions * mouse.pm (write_conf): fix to make make test_pms happy * install_steps.pm (exitInstall): save the report.bug in /root/report.bug * any.pm (rotate_logs): created, rotates ddebug.log and install.log in /root * ftp.pm (new): retry in case of ftp connection/login * commands.pm: report_bug: created, returns a string 2000/12/07 dam's * netconnect.pm: corrected ADSL connection choice. corrected typo 2000/12/06 dam's * install2.pm: erare humanum es firewall begins to infect the install :). new meta_class. * share/logo-mandrake-Firewall.xpm: aded logo for firewall * install_gtk.pm: corrected errors left pixmap centered if firewall improved the firewall theme. errare humanum es firewall infects the install. The logo is changed if firewall. 2000/12/06 Pixel * standalone/keyboarddrake: add possibility to use keyboarddrake non-interactive (aka give the keyboard as first parameter) * lang.pm, install_steps.pm, install_steps_interactive.pm, install2.pm, install_any.pm: adapt to the fact that RPM_INSTALL_LANG is obsoloted. Now rpm uses %_install_langs in /etc/rpm/macros 2000/12/05 Franois Pons * pkgs.pm: final fixes to versionCompare to make sure no deadlock can occurs. * Xconfigurator.pm: restored Matrox G200/G400 hw 3d accel configuration. 2000/12/05 Pablo Saratxaga * share/po/pt_BR.po, share/po/pl.po, share/po/da.po, share/po/fi.po, share/po/es.po: updated several pofiles 2000/12/04 Franois Pons * install_steps_interactive.pm: use isCdNotEjectable. * common.pm: added function isCdNotEjectable. * share/Cards+: SiS620 card are said to be unsupported by XF4. * pkgs.pm: load only one hdlist in memory if CD is not ejectable (low memory). fixed compareVersion for deadlock. removed silly CODE print on deporder problems. * Xconfigurator.pm: add Options sw_cursor for SiS 6326 in XF3 mode. 2000/12/03 dam's * mouse.pm: incorporated cmodifications in the firewall branch * netconnect.pm: netconnect_new > netconnect.pm * netconnect_consts.pm: incorporated in the firewall branch. * standalone/draknet2: incoporated in the firewall branch * any_new.pm: any_new > any, so we remove it now. * netconnect_new.pm: netconnect_new > netconnect, so we remove it now. incorporated in the firewall branch * modules.pm: incorporated modifications to the firewall branch. Hope they won't break anything... 2000/12/02 dam's * share/po/az.po: correction in firewall incorporated * ChangeLog: first attempt ro build the firewall install * standalone/mousedrake: incorporated in the firewall branch * share/po/ru.po, share/po/no.po, share/po/sk.po: correction incorporated in the firewall branch 2000/11/28 dam's * modules.pm: included reno's patches. Now should work without kudzu. branch to build the firewall install. * standalone/pixmaps/port.xpm, standalone/pixmaps/.xvpics/px4.xpm, standalone/pixmaps/ethernet.xpm, standalone/pixmaps/.xvpics/px1.xpm, standalone/pixmaps/px2.xpm, standalone/pixmaps/unknown.xpm, standalone/pixmaps/.xvpics/px3.xpm, standalone/pixmaps/px4.xpm, standalone/pixmaps/px1.xpm, standalone/pixmaps/.xvpics/px2.xpm, standalone/pixmaps/px3.xpm, standalone/pixmaps/modem.xpm, standalone/pixmaps/isdn.xpm: Initial revision branch to build the firewall install. * partition_table_dos.pm, share/po/bg.po, share/po/sr.po, share/template.in/cdrom.kdelnk.in, share/template.in/cdrom.fsdev.kdelnk.in, share/po/hr.po, c/silo.c, Makefile, share/consolefonts/lat0-sun16, share/themes/DarkMarble-check_off.png, share/themes/marble3d-button_def.png, share/locales.tar.bz2.sparc, do_resize_fat, share/po/wa.po, share/po/is.po, share/themes/DarkMarble-button3_out_prelight.png, resize_fat/main.pm, class_discard.pm, .cvsignore, share/step-orange.xpm, share/reload.xpm, install_interactive.pm, c/README, Xconfig.pm, share/themes.rc, share/themes/marble3d-bg1.png, perl2fcalls, share/themes-blackwhite.rc, share/themes-blueHeart.rc, pkgs.pm, keyboard.pm, share/rpm-installed.xpm, share/po/gl.po, share/po/lv.po, standalone/icons/ftout.xpm, Makefile.drakxtools, http.pm, share/step-green-click.xpm, partition_table_sun.pm, share/themes/focus.png, share/keymaps_generate, lang.pm, verify_c, share/po/.cvsignore, share/ftin.xpm, standalone/draksec, resize_fat/info_sector.pm, share/compssUsers, share/step-orange-on.xpm, Makefile.config, share/list.sparc, share/po/hu.po, run_program.pm, share/themes/marble3d-button4.png, share/rpm-unselected.xpm, share/list.i386, netconnect.pm, share/themes/DarkMarble-button3_out.png, c/md5_crypt.c, share/themes/mdk-toggle_on.png, partition_table.pm, standalone/livedrake, share/diskdrake.rc, share/themes/DarkMarble-check_on.png, standalone/draknet, share/po/br.po, Newt/typemap, share/themes/blueHeart-button2.png, share/po/ro.po, share/list, share/po/cs.po, share/po/be.po, share/po/sp.po, share/step-orange-click.xpm, modparm.pm, share/step-green.xpm, share/rpm-base.xpm, share/themes/marble3d-check1.png, crypto.pm, share/po/eu.po, share/themes/marble3d-button1.png, c/stuff.pm, install_steps.pm, share/Cards2CardsNames, Newt/Makefile.PL, share/themes/mdk-Desktop-bg.png, netconnect_consts.pm, share/po/id.po, share/themes/mdk-check_on.png, share/po/fi.po, share/po/sk.po, standalone/icons/findf.xpm, share/po/lt.po, share/themes/mdk-check_off.png, fs.pm, c/.cvsignore, share/themes/mdk-toggle_off.png, share/po/ca.po, timezone.pm, detect_devices.pm, share/consolefonts/ruscii_8x16, diskdrake.pm, standalone/icons/reload.xpm, share/rpm-selected.xpm, resize_fat/io.pm, Newt/Newt.xs, Newt/.cvsignore, install2, share/po/pt_BR.po, share/themes-marble3d.rc, resize_fat/fat.pm, sbus_probing/main.pm, share/template.in/floppy.fsdev.kdelnk.in, printer.pm, share/po/it.po, resize_fat/.cvsignore, install_steps_interactive.pm, share/themes/mdk-button4.png, live_install, standalone/draknet2, any_new.pm, share/list.alpha, share/rpm-semiselected.xpm, c.pm, share/logo-mandrake-Desktop.xpm, printerdrake.pm, network.pm, share/step-red-on.xpm, share/themes-mdk.rc, share/po/validate.pl, swap.pm, share/themes/blueHeart-button4.png, standalone/keyboarddrake, g_auto_install, share/po/es.po, standalone/lspcidrake, share/po/de.po, partition_table_mac.pm, standalone/mousedrake, devices.pm, share/po/ru.po, resize_fat/c_rewritten.xs, share/po/cy.po, share/themes/mdk-button1.png, netconnect_new.pm, install_any.pm, share/po/nl.po, share/aliases, share/keyboards.tar.bz2, share/po/sv.po, Newt/Av_CharPtrPtr.c, c/stuff.xs.pm, share/themes-DarkMarble.rc, share/step-red.xpm, Newt/Av_CharPtrPtr.h, c/smp.c, share/po/zh_CN.GB2312.po, commands.pm, standalone/icons/find.xpm, perl2etags, share/po/Changelog, standalone/drakboot, resize_fat/dir_entry.pm, share/fonts.tar.bz2, share/install.rc, share/themes/blueHeart-button1.png, share/Cards+, share/po/uk.po, share/MonitorsDB, share/template.in/Dos_.kdelnk.in, standalone/printerdrake, services.pm, share/kmap2bkmap, share/themes/blueHeart-button_def.png, share/po/az.po, share/po/tr.po, common.pm, getpkgs_deps, standalone/drakxconf, share/ftout.xpm, install_gtk.pm, Xconfigurator_consts.pm, share/consolefonts/lat2-sun16, share/po/no.po, resize_fat/boot_sector.pm, share/CardsNames, c/Makefile.PL, share/themes-mdk-Desktop.rc, share/themes/blueHeart-brown_bg1.png, share/logo-mandrake.xpm, share/consolefonts/Cyr_a8x16, standalone/netdrake, standalone/drakgw, share/po/sl.po, standalone/rpmdrake, share/makedev.sh, share/themes/DarkMarble-button3_in_prelight.png, share/themes-blue.rc, install_steps_newt.pm, resize_fat/Makefile.PL, partition_table_empty.pm, my_gtk.pm, share/po/i18n_compssUsers, install2.pm, share/compssList, share/po/fr.po, share/themes/DarkMarble-button3_in.png, standalone/icons/ftin.xpm, share/modparm.lst, raid.pm, standalone/diskdrake, share/po/ko.po, share/template.in/zip.fsdev.kdelnk.in, share/compssUsers.desktop, share/po/ja.po, any.pm, share/isdndb.net, share/template.in/floppy.kdelnk.in, share/step-green-on.xpm, share/step-red-click.xpm, share/po/Makefile, help.pm, share/po/zh_TW.Big5.po, c/sbus.c, genmodparm, share/po/pl.po, share/themes-savane.rc, install_steps_stdio.pm, share/po/th.po, loopback.pm, resize_fat/any.pm, share/po/el.po, install_steps_gtk.pm, Newt/Newt.pm, Xconfigurator.pm, interactive_gtk.pm, standalone/drakxservices, resize_fat/Makefile, fsedit.pm, interactive_stdio.pm, live_install2, resize_fat/directory.pm, share/po/pt.po, install_steps_auto_install.pm, share/po/DrakX.pot, share/themes/mdk-bg.png, share/list.ppc, share/po/ga.po, share/po/et.po, share/keymaps.tar.bz2, partition_table_bsd.pm, c/md5.c, share/help.xpm, share/themes/marble3d-check2.png, ftp.pm, c/md5.h, standalone/adduserdrake, share/themes/marble3d-button2.png, partition_table_raw.pm, share/template.in/zip.kdelnk.in, share/locales.tar.bz2, standalone/icons/fileopen.xpm, share/template.in/kppprc.in, ChangeLog, resize_fat/README, mouse.pm, commands, standalone/XFdrake, share/gconv.tar.bz2, share/po/eo.po, interactive.pm, log.pm, share/themes/DarkMarble-gloom2.png, interactive_newt.pm, share/po/da.po, resize_fat/c_rewritten.pm, bootloader.pm, share/po/af.po: branch to build the firewall install. 2000/11/28 Franois Pons * install2.pm: change upgrade section for keyboard. * install_steps_gtk.pm: extended chooseSizeToInstall. * install_steps.pm: updated comment. * pkgs.pm: fixed misuse of map with values returing list which are indexed afterward. * install_any.pm: removed some more logs. * keyboard.pm: keep track of unknown keyboard (for upgrade) * install_steps_interactive.pm: modified def_mark to 59 (gl hw acceleration level) and upgrade use this level for newbies so. make sure a recommended upgrade get the minimum and a little more (80). choose default size according to a default mark (currently 49). 2000/11/27 dam's * netconnect_consts.pm: added isdn Gazel card 10b5 1151 2000/11/27 Pixel * partition_table.pm (@bad_types): list of the different type of extended partitions (important_types): remove @bad_types from important_types 2000/11/25 Pablo Saratxaga * share/po/ru.po: updated Russian file 2000/11/24 dam's * mouse.pm: doc + split * netconnect_new.pm: added depmod after having writed modules.conf * standalone/mousedrake: splited 2000/11/24 Franois Pons * pkgs.pm: avoid .la files for selection. * install_steps.pm: added missing portmap. 2000/11/23 dam's * standalone/draknet2: progressbar. 2000/11/23 Franois Pons * install_steps_interactive.pm, install_steps_gtk.pm: updated with structural change of pkgs. * install_any.pm: removed some ugly logs. updated with structural change of pkgs. * install_steps.pm: added tempory fix for initscripts %post. updated with structural change of pkgs. * pkgs.pm: synced versionCompare() with rpmtools-2.1-4mdk. removed ugly log on transaction. added special case to avoid counting kernels space when upgrading as these package are not upgraded (just installed). Memory usage optimization, change structure of storing package informations. lot of fork to make sure of freeing memory by perl (no free on used hashes or arrays usable by other than perl), now upgrade takes as much as install which takes at least 0.5Mb less than before. 2000/11/23 Guillaume Cottenceau * share/compssList: put all tina stuff to weight 0 2000/11/21 Franois Pons * Xconfig.pm: added more subtil upgrade from /etc/X11/XF86Config* files, keep wacom entries. * Xconfigurator.pm: upgrade for XF86Config, take care of resolution and depth wanted. * install_steps.pm: always try to get default from /etc/X11/XF86Config removing logs. * pkgs.pm: cosmetic changes for upgrade, removing some logs. * install_steps_interactive.pm: removed code to ask if take care of /etc/X11/XF86Config* files. added wait message during rebuild of rpm database as it takes some time. * Xconfigurator_new.pm: WARNING 2000/11/21 Pablo Saratxaga * share/po/az.po: updated Azeri file 2000/11/20 Franois Pons * pkgs.pm: clean up as today filelist is no more. use parsehdlist from rpmtools-2.1-3mdk or above instead of perl code from DrakX forking to simulate a filelist server. this increase performance by 100 to 150% on selection of packages to upgrade. * share/list: added parsehdlist. * c/stuff.xs.pm: removed logs. 2000/11/20 Pixel * share/Cards+: add radeon * install_steps_auto_install.pm (exitInstall): fix message * install_steps.pm (afterInstallPackages): moved the writeandclean_ldsoconf here * fsedit.pm: add /var/ftp and /var/www in the list of propose mount-points 2000/11/17 Guillaume Cottenceau * install_any.pm: add openuniverse to the list of gl apps 2000/11/16 dam's * netconnect_new.pm: corrected isdn_get_{list, info} 2000/11/16 Franois Pons * share/list: include /usr/lib/rpm/macros else rpmlib gets crazy :-) * modules.pm: tempory version for current glibc, a lot of module have been removed due to problem of stage1 increase in size when compiled with glibc-2.2 and current modutils. * c/Makefile.PL: updated with rpmlib 4. * c/stuff.xs.pm: completed something that seems to work almost correctly at the first look with rpmlib 4. 2000/11/16 Guillaume Cottenceau * share/compssList: add netscape-german, thx to florin isdn4k-utils gets same weight as isdn4net, thx to Florin 2000/11/16 Pablo Saratxaga * share/po/no.po: updated Norwegian file * share/po/sk.po: updated Slovak file 2000/11/15 dam's * netconnect_new.pm: added isdn_get_list and isdn_get_info calls modules::write_conf to fill the modules.conf. * Xconfigurator_new.pm: added to fork frontends backends. Not operationnal at all for now. * modules.pm: when loading a new module, add an alias for it, even in standalone mode. 2000/11/15 Franois Pons * c/stuff.xs.pm: updated for rpm 4. * pkgs.pm: rpmdepOrder again (for new TAGp) 2000/11/15 Pixel * c/Makefile.PL: add librpmio * c/stuff.xs.pm: workaround for kernel-headers not in sync with glibc (dev_t) 2000/11/14 dam's * netconnect_new.pm: better structure for the ethx-driver. added call to add_alias and write_conf * standalone/draknet2: updated 2000/11/14 Franois Pons * pkgs.pm: removed foreach (<... which are eating memory fork install on upgrade for searching trhough filelist, this saves about 20Mb of memory before rpmlib transaction are started so its is more than 2 times faster for upgrading a system, sorry it was effectively a machine two overloaded that makes the upgrade slower. make rpmlib not to check size as DrakX should do it. added special cases for selection of packages according to files, avoid all kde-i18n packages if their locales-$lang is not selected, avoid a -devel package if only one files is updated (typical for fixes on package by moving files around). deactivated rpmdepOrder as it should be done directly in depslist.ordered file. fixed obsoletes which never run correctly, even if almost no package are selected explicitely this way. added log during selection of packages to upgrade to keep a track of what DrakX is doing. * modules.pm, network.pm, netconnect.pm, common.pm, modparm.pm, Xconfig.pm, commands.pm, lang.pm, fsedit.pm, detect_devices.pm, printer.pm, Xconfigurator.pm: removed foreach (<... which are eating memory 2000/11/14 Pablo Saratxaga * share/po/da.po: updated Danish file 2000/11/13 Guillaume Cottenceau * standalone/drakgw: Integrate Till's patches for better work with Cups. 2000/11/12 Pixel * standalone/mousedrake: fix for bug #1350 (mousedrake dies with: Undefined subroutine &mouse::serial_ports_names) * pkgs.pm (psUpdateHdlistsDeps): fixed an ugly typo (uses .cz2 for .cz and .cz22 for .cz2) that makes for than one CD install breaks :-( 2000/11/11 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file 2000/11/10 dam's * standalone/draknet2: draknet2 : new version of draknet, post-install only, uses only libDrakX backend, beautyfull * netconnect_new.pm: completed adsl_conf_backend corrected conf_network_card_backend : return interface and module separately splitted pppconfig. 2000/11/10 Franois Pons * share/po/fr.po: typo fixing * printerdrake.pm: fixed wrong case for managing IP for remove CUPS server updated typo for remote CUPS server configuration dialog 2000/11/10 Pablo Saratxaga * share/po/sk.po, share/po/lv.po: updated Latvian and Slovak files * share/po/wa.po, share/po/da.po: updated Danish and Walloon files 2000/11/10 Pixel * c/stuff.xs.pm: initIMPS2 move where it should be (in non-C_RPM dependent section) 2000/11/09 dam's * netconnect.pm: added handling for 2 ethernet cards with the same module 2000/11/09 Franois Pons * share/po/fr.po: add some missing translation (mainly printer for CUPS remote config) * printer.pm: make sure to restart cups when cupsd.conf is modified. * printerdrake.pm: fixed modification of BrowsePoll on a existing file. 2000/11/08 dam's * netconnect_new.pm: updated 2000/11/08 Franois Pons * Xconfigurator.pm: make sure class discarding do not destroy result * pkgs.pm: added new function for selected or installed accessor on pkg make sure package already installed for oem are marked as selected, as some code refer to this state to perform some actions (install_urpmi) * install_steps.pm: fixed for urpmi again; * printerdrake.pm: add management of BrowsePoll : in /etc/cups/cupsd.conf * printer.pm: add minimal management of /etc/cups/cupsd.conf 2000/11/08 Guillaume Cottenceau * share/MonitorsDB: Fixed Samsung SyncMaster 3Ne (bug #1136) 2000/11/08 Pablo Saratxaga * share/po/es.po: updated Spanish file 2000/11/07 dam's * mouse.pm: now there are 8 ttyS* available for configuration. Used for internal modem configuration that uses ttyS* > 3 * netconnect_new.pm: ttyS0 -> ttyS7 available for configuration some doc 2000/11/07 Franois Pons * Xconfigurator.pm: fixed text for card prefered in XFree 3.3 (RIVA128). * install_steps_interactive.pm: use of install_any::boot_medium to avoid listing medium used for boot * install_any.pm: use of $boot_medium where the boot medium is used (default 1) 2000/11/07 Guillaume Cottenceau * share/Cards+: fix tseng server for ET4000 W32i, W32p thanks to 2000/11/07 Pixel * install2.pm (main): in oem, configureX automatic (main): $::oem is now global :-( (needed in install_steps.pm) * install_steps.pm (afterInstallPackages): give medium 'cdrom' to install_urpmi in case of $::oem 2000/11/06 dam's * netconnect_new.pm: backend/frontend fork complete * any_new.pm: load_thiskind changed to load_thiskind_backend, the wait function is passed by argument * network.pm: configureNetwork2 commented. 2000/11/06 Franois Pons * pkgs.pm: created function for examining already installed package on install (oem). * install2.pm: add a flag to allow by default formating / * install_steps.pm: conditionnal format of / and use already installed packages if any on install. 2000/11/06 Guillaume Cottenceau * share/MonitorsDB: added Hitachi CM753 contributed by Adam Julius 2000/11/06 Pablo Saratxaga * share/po/DrakX.pot, share/po/ru.po, share/po/uk.po: updated pot file GRUB/LILO/SILO messages *must* be in ascii only. Changed cyrillic to ascii transliteration for them * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/az.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * keyboard.pm, ChangeLog: added the 3 kbd layouts for CZ and SK kbds 2000/11/06 Pixel * install2.pm (formatPartitions): formatMountPartitions done even in upgrade (main): set $o->{partitioning}{use_existing_root} in oem * install_steps.pm (doPartitionDisksAfter): remove the mount_all which is plain dumb (doPartitionDisksAfter): fs::mount_all moved here (doPartitionDisks): use $o->{partitioning}{use_existing_root} * install_any.pm (use_root_part): fs::mount_all really removed (use_root_part): fs::mount_all removed * install_steps_interactive.pm (choosePartitionsToFormat): don't propose already mounted partitions (installCrypto): nicer layout 2000/11/05 dam's * mouse.pm: changed 'IntelliMouse label' to 'Generic PS2 Wheel Mouse' 2000/11/05 Guillaume Cottenceau * share/MonitorsDB: added LG StudioWorks520Si contributed by Yves Maniette 2000/11/01 Pablo Saratxaga * share/po/eo.po: updated Esperanto file 2000/10/31 dam's * netconnect_new.pm: continuing forking frontend - backend. adsl ist nearly finished * any_new.pm: added this file to fork frontends and backends in any.pm 2000/10/30 Guillaume Cottenceau * share/compssList: heartbeat pixel wonderful un chien vaut mieux que deux tu damsera 2000/10/30 Pablo Saratxaga * share/po/wa.po: updated Walloon file * share/keyboards.tar.bz2: updated keyboards 2000/10/30 Pixel * lang.pm (load_po): backslash @ in po strings, otherwise the eval fails 2000/10/28 dam's * netconnect_new.pm: new version of draknet. Splited frontends - backends 2000/10/28 Pablo Saratxaga * share/po/tr.po: updated Turkish file 2000/10/27 Franois Pons * install_any.pm: remove the noising rpm output command line when loging installed rpm size (only usefull for live_update and just for conveniance). * pkgs.pm: Make sure $meta_class is defined in readCompsUsers (for HTTP hack) before reading a compssUsers file. * live_install: add VERSION in list of file that have to be symlinked. * common.pm: list_skels returns list of existing directory and writeable. * live_install2: Make sure to remove font path in /tmp/drakx before exiting. 2000/10/26 Pablo Saratxaga * share/po/DrakX.pot, share/po/tr.po, share/po/it.po: updated Italian and Turkish files 2000/10/24 Guillaume Cottenceau * share/compssList: fortune-mod gets 10/0/10 on request from egil 2000/10/24 Pablo Saratxaga * share/po/pl.po: updated Polish file 2000/10/23 Pablo Saratxaga * share/po/ca.po: updated Catalan file 2000/10/23 Pixel * install_steps.pm, ChangeLog, diskdrake.pm: added some carriage returns to please jl :) * detect_devices.pm (floppies, probeall): add require "modules" as it should be * install_interactive.pm (partitionWizardSolutions): add "require resize_fat::main" as it should be 2000/10/22 Guillaume Cottenceau * share/compssList: linuxconf-gui got -1/-1/-1 while gnome-linuxconf has 74/0/74 2000/10/21 Pablo Saratxaga * share/po/uk.po, share/po/tr.po, share/po/az.po: updated Azeri, Turkish and Ukrainian files 2000/10/20 fabman * share/po/es.po: updated 2000/10/20 Guillaume Cottenceau * share/compssList: ntp to -1/-1/-1 2000/10/19 Guillaume Cottenceau * share/compssList: put all packages requiring kde1-compat to 0 except kisdn-free aumix now gets a high weight (79) because it's required to save the mixer settings at shutdown 2000/10/19 Pixel * share/locales.tar.bz2: fix symlink zh_CN.GB2312 (was zh_CN.G23212) 2000/10/19 tlb * share/po/da.po: 100%, Troels Liebe Bentsen. 2000/10/18 Pablo Saratxaga * share/po/az.po: Added AZeri file * share/po/no.po: updated Norwegian file 2000/10/17 dam's * interactive_gtk.pm, netconnect.pm, netconnect_consts.pm: removed unused code in ineractive_gtk added some isdn card in pcitable corrected typos, and made ISA isdn work 2000/10/17 Pablo Saratxaga * share/po/lv.po: updated Latvian file 2000/10/16 Pablo Saratxaga * share/po/be.po, share/po/sp.po, share/po/pt.po, share/po/DrakX.pot, share/po/es.po, share/po/fr.po, share/po/bg.po, share/po/ga.po, share/po/sr.po, share/po/de.po, share/po/et.po, share/po/tr.po, share/po/eu.po, share/po/ru.po, share/po/pt_BR.po, share/po/hr.po, share/po/ko.po, share/po/cy.po, share/po/nl.po, share/po/ja.po, share/po/wa.po, share/po/sv.po, share/po/is.po, share/po/hu.po, share/po/zh_TW.Big5.po, share/po/it.po, share/po/id.po, share/po/pl.po, share/po/fi.po, share/po/no.po, share/po/zh_CN.GB2312.po, share/po/th.po, share/po/el.po, share/po/sk.po, share/po/lt.po, share/po/sl.po, share/po/br.po, share/po/ca.po, share/po/gl.po, share/po/lv.po, share/po/uk.po, share/po/eo.po, share/po/ro.po, share/po/da.po, share/po/cs.po, share/po/af.po: updated pot file * standalone/keyboarddrake, keyboard.pm, ChangeLog: corrected BackSpace setting 2000/10/16 Pixel * detect_devices.pm (cdroms): fix the setting of scdX for ide burners * share/compssList: sympa is -1 except for server * keyboard.pm (write): small pixelization (neater now) * install_steps.pm (installPackages): don't run ldconfig in g_auto_install 2000/10/15 Pablo Saratxaga * share/po/nl.po: updated Dutch file 2000/10/14 Pablo Saratxaga * lang.pm, keyboard.pm: small fix for Swedish locale * share/po/DrakX.pot, share/po/es.po, share/po/bg.po, share/po/fr.po, share/po/wa.po, share/po/de.po: updated Bulgarian file 2000/10/13 Franois Pons * partition_table_empty.pm: empty partition table as assumed only if the MBR is really composed of only null chars. 2000/10/13 Guillaume Cottenceau * share/compssList: added viavoicemenu 2000/10/12 Pixel * install_steps.pm (ask_mntpoint_s): dqs 2000/10/11 Pixel * .cvsignore: ignore flog files * install2.pm (main): test * ChangeLog: qsdqsd * install_steps_interactive.pm: * (selectKeyboard): set default $o->{langs} to $o->{lang} 2000/10/10 Guillaume Cottenceau * standalone/drakgw, ChangeLog: make only one call to urpmi in order to install all the needed rpm's 2000/10/10 Pablo Saratxaga * share/po/no.po, share/po/es.po: updated Norwegian file * share/po/pl.po: updated Polish file * share/po/zh_CN.GB2312.po, share/po/zh_TW.Big5.po: updated Chinese file 2000/10/10 tlb * share/po/da.po: 99%. 2000-10-10 Guillaume Cottenceau * standalone/drakgw: make only one call to urpmi in order to install all the needed rpm's 2000-10-10 DrakX * snapshot uploaded 2000-10-10 Pixel * install2.pm: increase $::VERSION 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Guillaume Cottenceau * share/po/fr.po: update after Dam's new messages in netconnect 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_any.pm (kdeicons_postinstall): remove the handling of doc desktop icons. see dadou 2000-10-09 Guillaume Cottenceau * share/compssUsers: new list (with icons) * share/list: add icons for compssUsers 2000-10-09 dam's * standalone/draknet: added wait message 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * share/themes-*.rc: change the fg[INSENSITIVE] entry 2000-10-09 Franois Pons * install_any.pm: added tuxracer in OpenGL games to install if an accelerated card has been found. 2000-10-09 dam's * netconnect.pm (main): asking connection after writing start/stop scripts. (adsl_conf): if during install, don't use chkconfig, make the links directly for the adsl init script. 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_steps.pm (afterInstallPackages): UserView in kdmrc is now true by default. So put false if security >= 3 instead of removing it. 2000-10-09 Franois Pons * any.pm: default speed of modem set to 115200. * fs.pm: fixed format of RAID partition. * install_interactive.pm: take into account RAID partitions for searching / partition. 2000-10-09 DrakX * snapshot uploaded 2000-10-09 Pixel * install_steps.pm (selectKeyboard): don't assume $o->{langs} is set (selectLanguage): don't set $o->{langs} (so that you can go back and it works) * common.pm (round_up, round_down): ensure number is an integer * install_steps_interactive.pm (chooseGroups): take into account the min_level to compute the size 2000-10-08 Pixel * install_steps_interactive.pm (choosePackages): move the computing of max_size before calling chooseGroups (not the one for desktop meta_class) (chooseGroups): compute the size of Miscellaneous 2000-10-07 DrakX * snapshot uploaded 2000-10-07 Pixel * share/compssList: don't install locales-* even in 'all' install (those files are usefull if RPM_INSTALL_LANG doesn't include that lang) 2000-10-07 DrakX * snapshot uploaded 2000-10-07 Pixel * pkgs.pm (install): log the gonna be installed packages (-> be able to track not installed packages that should have been installed) 2000-10-06 DrakX * snapshot uploaded 2000-10-06 dam's * netconnect.pm (pppConfig): the domain used for kppp is copied in resolv.conf (intro): connection detection improved : now use "ifconfig | grep interface" (pppConfig): corrected cnx_up/down 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Pixel * install_steps.pm (afterInstallPackages): don't fail if kdeglobals file is not there * share/compssUsers.desktop: fix icons * detect_devices.pm (cdroms): fix for scsi cdrom drives * pci_probing/pcitable: put cs46xx instead of snd-card-cs461x (dixit jeff) * diskdrake.pm (Resize): comment ext2&reiserfs resizing for the moment 2000-10-06 Frederic Lepied * Xconfigurator.pm (write_XF86Config): added mode of wacom devices 2000-10-06 dam's * netconnect.pm (ask_connect_now): connection is now tested. 2000-10-06 Franois Pons * install_steps_interactive.pm, install_steps_gtk.pm: updated license. * Xconfigurator.pm: removed Matrox G200/G400 3D acceleration by DRI, use only Mesa with Utah GLX, fixed autologin for avoiding drakres and no wm available, moved Riva128 card from experimental to stable, fixed presentations of text. * pci_probing/pcitable: fixed Cirrus Logic sound card. 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Franois Pons * install2.pm: fixed bad call to hasUsb... * share/Cards+: fixed wrong use of SiS card with 4.0.1, only keep 530, 620 and 6326 with XFree 4.0.1. 2000-10-06 DrakX * snapshot uploaded 2000-10-06 Pixel * share/list: remove /usr/X11R6/lib/X11/Cards, not needed anymore * install_steps.pm (afterInstallPackages): put the Charset in kdeglobals, otherwise kde uses charset iso8859-1 :( * lang.pm (charset): created * common.pm (update_userkderc): fix it, change the argument passing 2000-10-05 Pixel * share/compssList: raise kde-i18n-*, should be installed whenever kdebase is installed * pci_probing/pcitable: integrate patch from viet (concerns sym53c8xx cards) * share/compssUsers: use "documentation" as the database icon * install_steps_interactive.pm (chooseGroups): fix to accept icons not in the format "*_section.xpm" * install2.pm (miscellaneous): put yes/no in sysconfig/usb entries 2000-10-05 dam's * netconnect.pm (adsl_conf): updated pppoe conf. (main): added $netc->{minus_one} to avoid to count dhcp configured eth when asking to share the connection. (adsl-pppoe): improvement. Should work now. (miscellaneous): corrected chmod 755 to 744 for connections scripts * netconnect.pm (main): network is stopped then started, instead of restarted. 2000-10-05 Franois Pons * live_install: added icons (this fixes the yellow on white tooltips problem). * install_any.pm: added ghostscript-utils in the list of packages to copy when changing CD. * printerdrake.pm: install ghostscript-utils if a lexmark printer is selected on cups. 2000-10-05 DrakX * snapshot uploaded 2000-10-05 Pixel * install_any.pm (loadO): look for auto_inst.cfg in /, not in /Mandrake/base 2000-10-05 Franois Pons * netconnect.pm: fixed syntax error. * share/po/i18n_compssUsers: simplified version and fixed dependancies to pkgs.pm (for building drakxtools). 2000-10-04 Franois Pons * install_gtk.pm: removed 80 pixel on height for live upgrade. * install_steps.pm: do not set keyboard when live upgrade after setting the language. * install_steps_gtk.pm: fixed the trying to start a X server on live. 2000-10-04 Pixel * share/po/i18n_compssUsers: fake module ``c'' so that no need to build DrakX to use i18n_compssUsers * install_steps_interactive.pm (selectLanguage): update license * install_steps_gtk.pm (installPackages): add second license for shitty soft (commercial one) 2000-10-04 dam's * draknet (netconnect.pm and network.pm): various translations corrected, network is restarted, buttons connect/disconnect debugged. 2000-10-04 DrakX * snapshot uploaded 2000-10-04 Pixel * Xconfigurator.pm (main): kill prefdm instead of autologin * install_any.pm (find_root_parts): don't use suggest_mount_points, it couldn't do what we wanted (guess_mount_point): created, contains the common stuff between suggest_mount_points and find_root_parts 2000-10-04 Guillaume Cottenceau * standalone/drakgw: fix some failing/untranslated i18n messages * share/po/fr.po: write translations according to drakgw 2000-10-04 Franois Pons * Xconfigurator.pm: removed bad card for 3D Rage Pro. * install_any.pm: removed Aurora for SiS card, add more case for detecting right cdrom for live upgrade, fixed wrong list of packages for laptops. * c/stuff.xs.pm: added time interval of 200ms between update of progression bar of install, make sure the last step is seen. 2000-10-04 DrakX * snapshot uploaded 2000-10-04 Pixel * modules.pm (when_load): stricter regexp for $type is scsi or not (so that scsi_mod with is scsi_raw doesn't get an alias scsi_hostadapter) * detect_devices.pm (isLS120Drive): extend the regexp to include "Caleb Technology - 144MB FDD UHD Floppy" * detect_devices.pm (burners, IDEburners): reworked, renamed, now works! * c/stuff.xs.pm (isBurner): created * modules.pm (load_ide): make sure ide-cd is loaded! * install_steps_interactive.pm (chooseGroups): the label and help are now translated (at least will be), so use the translations 2000-10-03 Pixel * share/po/Makefile (DrakX.pot): added the to-be-translated from compssUsers * share/po/i18n_compssUsers: read the compssUsers's and output the to-be-translated in po format * log.pm (l): log to STDERR instead of STDOUT * install_any.pm (loadO): use first floppy drive available (won't help much though, as stage1 doesn't follow this...) 2000-10-03 DrakX * snapshot uploaded 2000-10-03 Pixel * Xconfigurator.pm (autologin): don't propose autologin in security > 3 * common.pm (availableRamMB): HACK HACK if i810 and memsize, returns 127 * bootloader.pm (suggest): don't use grub if more than 800MB 2000-10-04 Guillaume Cottenceau * share/po/validate.pl: create this tool * share/po/fr.po: fix many typos * share/po/fr.po: make compssUsers translation 2000-10-03 Franois Pons * Xconfigurator_consts.pm: changed resolution allocation. * fs.pm: removed no more used log. * install2.pm: add exit button if live upgrade. * install_any.pm: increased minimal available size to 65Mb. * install_steps.pm, standalone/printerdrake: fixed cups to CUPS for mode. * printerdrake.pm: fixed not_edit for lpr mode of printerdrake. * share/Cards+: fixed Savage2000 entry. 2000-10-03 DrakX * snapshot uploaded 2000-10-03 Franois Pons * Xconfigurator.pm: updated bad card with Rage Mobility card. * live_install: added test of root user, abort if not root. 2000-10-03 Guillaume Cottenceau * share/po/fr.po: fixed bug #518 and fixed other misc errors 2000-10-03 DrakX * snapshot uploaded 2000-10-02 Franois Pons * diskdrake.pm (Resize): fix to make ext2resizing work a little better * install_steps.pm: fixed installation of urpmi configuration. * detect_devices.pm: updated comment about UltraDMA66/100 management. * modules.pm: updated comment about UltraDMA66/100 management. * diskdrake.pm: adding a cylinder for the minimum of the resize and if there is nothing to do for resize, simply return. * install_any.pm: added missing require pkgs. 2000-10-02 Pixel * many files: remove many lnx4win special cases which are not needed anymore * any.pm (addUsers): grpuser output goes to Mr Dave * bootloader.pm (install_lilo): change the default color of menu * install_steps_interactive.pm (choosePackages): add 300MB choice in desktop * mouse.pm (fullnames): fix i18n fix * install_steps.pm (miscellaneous): don't add ide2=0x... for ultra66 (otherwise chmouel is not happy, so is hdc being hde) * Xconfigurator.pm (main): add handling of icewm logout * c/stuff.xs.pm: changed the stepping of "Progressing installing package" 2000-10-02 dam's * netconnect.pm (main): infos are written only when needed. * netconnect.pm (intro): connection checking now works. 2000-10-02 Chmouel Boudjnah * pci_probing/pcitable: s|snd-card-via686a|via82cxxx_audio|; like jeff request. 2000-09-30 DrakX * snapshot uploaded 2000-09-30 dam's * netconnect.pm: a LOT of bugs fixed. draknet is now completely brok^H^H^H^Hfrozen. 2000-09-29 DrakX * snapshot uploaded 2000-09-29 dam's * netconnect.pm (adsl_conf): dhcp should better work. * network.pm (configureNetwork): remove connection script if a gateway is given. * common.pm (setVarsInShMode): created. chmod the file with permissions passed in argument. 2000-09-29 Franois Pons * modules.pm (load): fixed when standalone, use modprobe. * pkgs.pm: added preference for wu-ftpd. * detect_devices.pm: added code to proble USB printer. * printer.pm: fixed missing PRINTER=yes on CUPS configuration for USB printer. * install_steps.pm: removed possibilty to add an user in urpmi group (jloup). * install_steps_interactive.pm: log if CD not ejectable. 2000-09-29 Guillaume Cottenceau * share/compssList: sync with latest packages * install_steps_interactive.pm (selectLanguage($)): s/42/43/ in MandrakeSoft physical address 2000-09-29 DrakX * snapshot uploaded 2000-09-29 dam's * netconnect.pm (intro): detection of internet configuration/connexion state. * network.pm (write_resolv_conf): better "ppp temp nameserver" in resolv.conf 2000-09-28 Pixel * modules.pm (load_thiskind): add read_already_loaded cuz of pcmcia 2000-09-28 Guillaume Cottenceau * share/compssList: add nasty DrakSync and DrakProfile with 50 0 50 2000-09-28 DrakX * snapshot uploaded 2000-09-28 Pixel * install_steps_interactive.pm (choosePackages): the minimum is 25 in beginner, not 10 * pkgs.pm (readCompssUsers): fix reading description * install_steps.pm (afterInstallPackages): remove the code to handle RPM-GPG-KEYS 2000-09-28 dam's * interactive_gtk.pm (ask_from_list_with_helpW): no more theme parsing, no more draknet.rc * netconnect.pm (read_net_conf): no adsl tree anymore. * netconnect.pm: drakgw called if enough card are installed. * netconnect.pm: minor bugs correction. 2000-09-28 Franois Pons * Makefile.config: added livedrake for drakxtools. * diskdrake.pm: use corrected partition size when resizing a dos partition (like the others). * install_any.pm: no more pnm2ppa packages and others in package to copy when changing CD. * live_install: exec live_install2 instead. * live_install2: contains post live upgrade stuff now. * printerdrake.pm: protect set_help() usage by if $::isInstall, removed reference to package pnm2ppa and others. * standalone/livedrake: initial release for drakxtools. 2000-09-28 DrakX * snapshot uploaded 2000-09-28 Pixel * install_interactive.pm (partitionWizardSolutions): fix the limit cases for lnx4win * share/po/Makefile ($(PMSCFILES)): fix the DrakX.pot generation 2000-09-27 Pixel * install_steps_interactive.pm (choosePackages): set $size2install to $availableC in desktop install, as it should be * install2.pm (choosePackages): remove the code for removing kdesu in high security... * install_steps_interactive.pm (createBootdisk): format more nicely the text * install_steps_gtk.pm (installPackages): add 10 seconds to have a better estimation * install_steps_interactive.pm (chooseGroups): now returns a boolean (choosePackages): use chooseGroups return value to redo choosePackages * install_steps_gtk.pm (selectMouse): if mouse type is none, then don't test! * Xconfigurator.pm (monitorConfiguration): rename Unlisted to Custom * various: replace all Rescue by Update * pkgs.pm (readCompssUsers): read description for groups * install_steps_interactive.pm (chooseGroups): add description for groups 2000-09-27 Guillaume Cottenceau * share/compssUsers.desktop: added description * share/compssUsers: added description * share/compssUsers.desktop: added icon support, reordered, renamed * share/compssUsers: reordered, renamed 2000-09-27 DrakX * snapshot uploaded 2000-09-27 Pixel * install_steps_interactive.pm (selectLanguage): intregrate license again * pkgs.pm (readCompssUsers): reads compssUsers.meta_class * diskdrake.pm (Create): replace ``ne "i386"'' by ``!~ /i.86/'' (as should be) * install_steps_gtk.pm (selectInstallClass1): if @$l (list of install classes) contains only one element, call install_steps_interactive::selectInstallClass1 * install_steps_interactive.pm (choosePartitionsToFormat): fix for "no partitions selected to format" * my_gtk.pm (_create_window): alt-e now *toggles* expert/newbie 2000-09-27 Guillaume Cottenceau * share/compssList: more for gnupg, -11 for sucking things, changed compss-groups to be less than 70. * share/compssUsers: modified compssUsers with Warly, added compssUsers.desktop, simplified for KD (now uses Graphical Desktop/KDE instead of listing all relevant packages) 2000-09-27 dam's * netconnect.pm (get_info_adsl_providers, read_adsl_providers): Created. adsl provider tree. (set_net_conf): better informations storing. * my_gtk.pm (new): windows are always centered if standalone. 2000-09-27 Franois Pons * Xconfigurator.pm: added option "sw_cursor" for S3 Trio3D. fixed 3D hw acceleration for i815 (VideoRam). prefer XF3 for all NeoMagic cards. * install_gtk.pm: re-enabled themes on live upgrade but without modifying background image. * install_steps_gtk.pm: fixed missing help. * live_install: lot of fixes to enable DrakX font, keep upgraded system clean (libperl.so which allows graphical login). * pkgs.pm: added function allowedToUpgrade to filter kernel package. 2000-09-27 DrakX * snapshot uploaded 2000-09-27 Pixel * install_steps_interactive.pm (configureX): if `clicked' don't go to auto mode * Xconfigurator.pm (monitorConfiguration): fix the translated 'Generic' which is not so (and must not be so) anymore 2000-09-26 Pixel * pkgs.pm: remove all Unskip code * my_gtk.pm (_create_window): add shortcut alt-e to switch to expert * Xconfigurator.pm (resolutionsConfiguration): fix for setting legal resolution * install_steps_interactive.pm (selectLanguage): use formatAlaTeX on the license 2000-09-26 Franois Pons * fs.pm: added mounting of swap partition when mounting them all (this can help :-) * pkgs.pm: fixed correction size code to make (really) a true bijection between corrected and rpm size. 2000-09-26 DrakX * snapshot uploaded 2000-09-26 Pixel * install_steps_interactive.pm (selectLanguage): integrate the license (temporary one) * modules.pm (write_conf): fix the /etc/modules generation * interactive_gtk.pm (ask_many_from_listW): if more than 5 entries in icon format, use scrollbar. In non-icon format, use scrollbar for more than 11 entries. * commands.pm (bug): add ddcxinfos * pci_probing/pcitable: replace tulip by de4x5 for 2104x cards 2000-09-26 Franois Pons * Xconfigurator.pm: added more 3D Rage Pro card for 3D acceleration with Utah-GLX (Rage Mobility, Rage XC/XL), modified identification for checking acceleration. * install_any.pm: added automatic installation (up 60) for OpenGL games if a graphic card MAY BE accelerated. * live_install: fixed perl idioms in pure shell script and added packdrake symlink if not already installed. * share/compssList: changed level to -1 for all needing 3D hw acceleration packages. 2000-09-26 dam's * network.pm (write_resolv_conf): write temp dns line to be used with new initscripts package. Use to set dns live. 2000-09-26 DrakX * snapshot uploaded 2000-09-26 Pixel * mouse.pm (read): catch exception if fullname2mouse fails (eg: old FULLNAME format) 2000-09-25 Pixel * share/MonitorsDB: merge with latest redhat MonitorsDB * pci_probing/pcitable: major merge with latest redhat pcitable * share/Cards+: added "Intel 815", renamed "Rage 128 (generic)" to "Rage 128", added "Rage 128 Mobility" * install_any.pm (getAvailableSpace): keep 10% of free space on big partitions * Xconfigurator.pm (readMonitorsDB): don't translate Generic (otherwise, only a part is translated, see MonitorsDB for the non-translated part) * interactive.pm (ask_many_from_list): fix sorting * install_gtk.pm (test_mouse): smaller box to fit in 640x480 * install_steps.pm (afterInstallPackages, beforeInstallPackages): RPM-GPG-KEYS is copied before installing packages * pkgs.pm (readCompssUsers): handle icons in compssUsers * common.pm (truncate_list): ensure the list is not too big * install_steps_gtk.pm (choosePackagesTree): restrict the list to 20 elements if it is too big (use truncate_list) 2000-09-25 Franois Pons * bootloader.pm: add Video mode for entry. * fs.pm: updated for live upgrade. * install2.pm: dropped unuseful steps filtering. * install_any.pm: fixed wrong Device3Dfx package name and clean postinstall rpms directory on upgrade before filling it. * install_gtk.pm: removed window restrictions of live upgrade. * install_steps.pm: fixed initrd symlink following in case of upgrade. * install_steps_gtk.pm, install_steps_interactive.pm: keep always upgrade on live upgrade. * modules.pm: may fixed pcmcia lost driver (typically on network). * pkgs.pm: fixed (uggly?) usage of floating perl data on perl script :-) * printer.pm: back to "Generic PostScript" for default printer (jloup). * printerdrake.pm: make sure an expert can choose among available devices. 2000-09-25 dam's * network.pm (write_resolv_conf): write '# ppp temp entry adsl' in /etc/resolv.conf if needed. * netconnect.pm : adsl connection does'nt need any dns anymore. * netconnect.pm (read_net_conf): created. draknet now stores and reload the config. * netconnect.pm (main): if the user is french and uses french keyboard, don't ask his country. 2000-09-25 Pixel * modules.pm: added 8139too * share/Cards+: GeForce2 DDR is handled by driver "nv" * Xconfigurator.pm (main): in killall X for Xdrakres, also killall kdm/xdm/gdm/autologin :) 2000-09-25 DrakX * snapshot uploaded 2000-09-25 dam's * network.pm (configureNetwork): Warn user if he already configured the interface. 2000-09-24 Pixel * modules.pm (mergein_conf): created. call read_conf, fills %modules::conf and set $modules::scsi 2000-09-24 Guillaume Cottenceau * standalone/drakgw (fatal_quit($)): add log of reason of fatal_quit 2000-09-24 DrakX * snapshot uploaded 2000-09-24 Pixel * commands.pm (bug): use first floppy drive instead of fd0 hard coded (nice for LS120's) * install_steps_gtk.pm (selectMouse): if device changed, do the test * standalone/mousedrake: fix for serial mice * install_steps_interactive.pm (selectMouse): fix for serial mice 2000-09-23 dam's * netconnect.pm (conf_network_card): now displays the modules of detected ethernet cards. 2000-09-22 dam's * netconnect.pm (main): calls drakegw. * netconnect.pm (get_net_device): fixed 2000-09-22 Guillaume Cottenceau * standalone/drakgw: - added logs - added verbose mode - fixed wrong stopping of named in other languages than english * netconnect.pm (get_net_device): try to fix it.. 2000-09-22 Pixel * install_steps_interactive.pm (selectKeyboard, choosePartitionsToFormat, chooseCD, installCrypto): use new ask_many_from_list (): * interactive.pm (ask_many_from_list): now only ask_many_from_list exists, obsoleting ask_many_from_list_ref and ask_many_from_list_with_help. More flexible and nicer * interactive_newt.pm (ask_many_from_listW): adapted to new calling type * interactive_gtk.pm (ask_many_from_listW): adapted to new calling type, handle 'shadow' and 'icon2f' 2000-09-22 Pixel * install2.pm (main): if /lnx4win/i in VERSION, set $o->{lnx4win} * Xconfigurator.pm (cardConfiguration): fix setting 4MB of meg for i810 (testFinalConfig): i810 is a verybad_card, aka can't test anything on it :-( (main): fork to background and stay there while waiting for the WM to exit (testFinalConfig): update the backgroung image path * interactive_gtk.pm (exit): flush X before leaving (otherwise the mousecursor is not restored) * run_program.pm (rooted): don't redirect the stdout and stderr to ddebug.log if not $::isInstall * log.pm (l): log on stdout/stderr if !isInstall and !isStandalone * modules.pm (load_raw): redirect stderr to tty5 * install2.pm (main): set variable $::isInstall 2000-09-22 DrakX * snapshot uploaded 2000-09-22 Guillaume Cottenceau * standalone/drakgw: now includes information from netconnect to ignore the interface used for Internet connection 2000-09-22 dam's * install_steps_gtk.pm (selectInstallClass1): pixel's typo. * netconnect.pm (get_net_device): added get_net_device to know which interface has been used to configure the internet connection. (conf_network_card): ask to restart network if dhcp too. (main): enable dialing when modem. * network.pm (configureNetworkIntf): changed label to warn people about already configured eth cards. 2000-09-22 Franois Pons * install_gtk.pm: added Desktop themes. * share/themes-mdk-Desktop.rc, share/themes/mdk-Desktop-bg.png: initial release. * install2.pm: moved back to all steps for live upgrade. * install_gtk.pm: select right logo if desktop. * install_steps_interactive, install_steps_gtk.pm: avoid asking if upgrade for a live upgrade. 2000-09-22 Pixel * install_steps.pm: add some call to log_sizes to log the installed size * install_steps_gtk.pm (installPackages): beep before changeMedium 2000-09-21 Pixel * interactive.pm (ask_from_listf): try to call the f translation function on the default value with the index * install_steps.pm (afterInstallPackages): make the gpg code work, changed the call to "gpg --fast-import --homedir /etc/rpm /root/tmp/RPM-GPG-KEYS" * detect_devices.pm: cleanup and removed unused code 2000-09-21 Guillaume Cottenceau * detect_devices.pm (getNet()): really remove plip in standalone 2000-09-21 Franois Pons * install_steps.pm, netconnect.pm: changed NETWORKING reference from false to no. * printer.pm: changed timeout from 30 to 60. * printerdrake.pm: added wait message when waiting for cups to start. * pci_probing/pcitable: added erwan VIA Rhine board. * network.pm: added DHCP_HOSTNAME reference. 2000-09-21 DrakX * snapshot uploaded 2000-09-21 Pixel * standalone/keyboarddrake: fix for XF4 * Xconfigurator.pm (write_XF86Config): comment the omit xfree86-dga * install_steps.pm (afterInstallPackages): configure GPG public keyring with mandrake key * standalone/mousedrake: updated/fixed for new mouse handling * install2.pm (main): update for handling oem installs * many files: relGetFile cleanup, updated calls to getFile and getAndSaveFile accordingly * Xconfigurator.pm (testFinalConfig): new XFdrake-image-test.jpg * detect_devices.pm (@netdevices): plip removed in standalone, otherwise plip is always there (because of kmod) * install_steps_interactive.pm (choosePartitionsToFormat): replace the die "cancel" by die "already displayed", so that no error is displayed. * pci_probing/pcitable: replace some rtl8139 by 8139too, added cards DELTA8139 and ADDTRON8139 (for jeff) * Xconfigurator.pm (show_info): also show the colordepth and resolution. don't show server if none, show XF4 driver if there's one. (main): change the "Forget the changes" to "Keep the changes?" with displaying the current configuration. 2000-09-21 Franois Pons * printer.pm: changed "PostScript" ppd default description to "Raw queue (no filtering)", asked by Till. * Xconfigurator.pm: add log of what user select for 3D hw acceleration. * share/compssList: changed XFree86-glide-module to -2 because the level is the same for XFree86-Glide* which may have multiple different version installed due to dependancies of the first one. 2000-09-21 dam's * netconnect.pm (conf_network_card): added check when dhcp. Cable connection should now work. 2000-09-21 DrakX * snapshot uploaded 2000-09-21 Pixel * install_steps_interactive.pm (exitInstall): call $o->exit if "Some steps are not completed" 2000-09-20 Pixel * bootloader.pm (install_loadlin_config_sys, install_loadlin_desktop): extracted from install_loadlin, do not call them anymore (remove it?) (suggest): put grub in lnx4win install * common.pm (availableRamMB): fixed (round to a multiple of 4) 2000-09-20 dam's * netconnect.pm (get_info_isdn_providers & read_isdn_providers): read file in /usr/share and $prefix/usr/share (isdn_write_config): corrected file to be sh compliant. (isdn_write_config): added default route settings for isdn. 2000-09-20 DrakX * snapshot uploaded 2000-09-20 Pixel * pci_probing/pcitable: replace es1371 by snd-card-ens1371 2000-09-20 dam's * Xconfigurator.pm (autologin): for urpmi, added `--best-output' and suspend/resume 2000-09-20 Guillaume Cottenceau * standalone/printerdrake: for urpmi, added `--best-output' and suspend/resume * standalone/XFdrake: for urpmi, added `--best-output' and suspend/resume 2000-09-20 dam's * standalone/draknet: used new package install function. 2000-09-20 Pixel * detect_devices.pm (isFloppyOrHD): detects wether a device is a floppy or not based on its size (for scsi floppy) * Xconfigurator.pm (testFinalConfig): check if "server" OR "driver" field is set (otherwise XF4 only card won't pass) * bootloader.pm (suggest): fix for ``installing the last cooker from kenobi:/I on an smp machine i don't get anymore an entry for linux-up'' (c chmouel) 2000-09-20 dam's * netconnect.pm (read_isdn_providers): corrected typo ($_ -> $_[0]) 2000-09-20 DrakX * snapshot uploaded 2000-09-19 Pixel * modules.pm (get_pcmcia_devices): fix (especially, now ethernet should be detected) * lang.pm (get_langs): created, gives rpm install langs * install_any.pm (setPackages): give langs::get_langs() to readCompssList * pkgs.pm (readCompssList): don't use RPM_INSTALL_LANG, use given $langs instead. This fixes the RPM_INSTALL_LANG=all install. 2000-09-19 Pablo Saratxaga * netconnect.pm: make dhcp-client, pump and such not translatable. Those are program names and should therefore not be translated, that only confuses translators 2000-09-19 dam's * Xconfigurator.pm (autologin): corrected @users definition and passwd cat. 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * many files: changed some access to get_root to get_root_ * install_steps_interactive.pm (choosePackages): added code for desktop meta_class install type * install_steps_gtk.pm (selectMouse): cleanup, give parameter emulate3buttons to setMouseLive * c/stuff.xs.pm (setMouseLive): add argument emulate3buttons 2000-09-19 Guillaume Cottenceau * interactive*.pm: changed `suspend' and `resume' to behave as expected, added `enter_console' and `leave_console' 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * install2.pm (miscellaneous): replaced LITTLE_FRIED_OIGNONS by META_CLASS * Xconfigurator.pm (cardConfiguration): when ddcxinfos gives false result (not enough VideoRam), also remove the found resolutions * Xconfigurator.pm (main): remove the automatic searching of resolutions * Xconfigurator.pm (resolutionsConfiguration): cleanup, remove the automatic searching of resolutions. * mouse.pm (fullnames): changed the `_' in `[' before Other (nicer, uh?) * install2.pm (selectMouse): changed clicked to !first_time 2000-09-19 DrakX * snapshot uploaded 2000-09-19 Pixel * Xconfigurator.pm (testFinalConfig): remove the bloody prototype 2000-09-19 DrakX * snapshot uploaded 2000-09-18 Dam's * Xconfigurator (autologin): do it eve, if newbie. Autologin is now in separated function. 2000-09-18 Pixel * Xconfigurator.pm (testFinalConfig): don't skip the test in auto if called via "Test again" * Xconfigurator.pm (resolutionsConfiguration): ensure all depth are bounded * bootloader.pm (suggest): don't put "linux-nonfb" if "linux" is classic and no-fb * fsedit.pm (check_mntpoint): add a check for /etc /lib... which must not be mount points. Also check that /home, /tmp and /usr are on trueFS * interactive.pm (ask_from_entries_ref): add bounding of "val" in case of type "range". die if min > max. 2000-09-18 DrakX * snapshot uploaded 2000-09-18 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): nicer partition/device display * partition_table_raw.pm (zero_MBR): add on the fly require of the good partition_table_$type * detect_devices.pm (cdroms): fix (yet again) the scd$nb device assignment to ide burners * install_steps.pm (afterInstallPackages): comment out a part of the icons mess messing * Xconfigurator.pm (cardConfiguration): move Unlisted to Other/Unlisted * share/CardsNames: updated (for Voodoo5) * install_steps_gtk.pm (selectMouse): fix the test to know wether the guy has changed the mouse type (to know wether to test the mouse or not) * install_steps_interactive.pm (selectLanguage): add the license * install_steps_interactive.pm (choosePackages): have the "Recommended" size be the default (in the choice Minimum/Recommanded/Complete) * diskdrake.pm (Type): fix a typo * install_steps.pm (doPartitionDisksAfter): mark partition as mounted 2000-09-17 DrakX * snapshot uploaded 2000-09-17 Pixel * install/pcmcia_config.patch: cleaned * diskdrake.pm (Create, Type): have type field not_editable * tools/make_mdkinst_stage2: use TMPDIR if available 2000-09-16 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): move the setting of toFormat before asking for bad blocks, seems to fix things?? weird :-/ * network.pm (miscellaneousNetwork): fix the setting of focus on error (tx2Thomas Poindessous :) * install_steps_interactive.pm (configurePrinter): changed "Cancel" to "None" (for Thomas Poindessous :) * printer.pm (poll_ppd_base): max polling time raised from 10s to 30s (for Till) * install_steps.pm (ask_mntpoint_s): don't force partition type to be ext2 (at least if it's a known fs) (for Warly) 2000-09-15 DrakX * snapshot uploaded 2000-09-15 Pixel * install_steps_gtk.pm (set_help): save the help message displayed in $o->{current_help} * install_gtk.pm (create_big_help): display $o->{current_help} * mouse.pm: reworked quite a lot. Now sorts/categorize nicely the mice. * install_steps_interactive.pm (selectMouse): adapted for reworked mouse.pm * install2.pm (selectMouse): adapted for mouse::read now returning an hash ref * detect_devices.pm (hasMousePS2): remove hasMouseMacUSB, do it in one function (now takes the device in the parameter) * interactive.pm (ask_from_treelistf): added (just like ask_from_listf, but with a tree) * Xconfigurator.pm: the reference is now nbuttons to know wether to put Emulate3Buttons or ZAxisMapping. * Xconfigurator.pm (cardConfiguration): install Glide_V3-DRI on Banshee too. * Xconfig.pm: guess nbuttons based on Emulate3Buttons and ZAxisMapping. * common.pm (availableRamMB): replace availableRam, now use the size of /proc/kcore (what else to find the real ramsize?) * common.pm (cat__): created * install2.pm (main): add field meta_class in $o. Can be 'desktop', in case option desktop is given, or if /desktop/i is found in /VERSION * install_steps.pm (miscellaneous): for lnx4win, always have 'mem=' (so that the initrd is visible by both windows * install2.pm (main): add option "desktop" * install_any.pm (generate_ks_cfg): fix for new(?) $o->{intf} format * install_interactive.pm (partitionWizardSolutions): use only TrueFS for existing_part (partitionWizard): have only "loopback" for lnx4win * pci_probing/pcitable: associate Voodoo5 with Voodoo5 * share/Cards+: add Voodoo5 * bootloader.pm (suggest): add entry linux-nonfb (called linux-up for smp) 2000-09-14 DrakX * snapshot uploaded 2000-09-12 Franois Pons * detect_devices.pm, mouse.pm: moved probing serial port before to detect a wacom tablet (even if a PS/2 or USB mouse is found). * help.pm: corrected reference to previous version of LM (jloup). * install2.pm: removed duplicate code for getting network configuration, using network module. * netconnect.pm: intf is now a hash and no more an array. * network.pm: changed nature of intf to hash from array, reworked write_resolv_conf function to keep old code in comment but only when not used anymore (to make it easier by hand modification). * printer.pm: SOCKET accessible to expert only (jloup). * printerdrake.pm: local port only available for expert if a printer has been detected (jloup). 2000-09-11 Franois Pons * Xconfigurator.pm: reorganized choices of 3D optimizations, added experimental support for expert users. * install_steps_interactive.pm: removed question to keep XF3. 2000-09-05 Franois Pons * printerdrake.pm: removed all previous URI specific mode and added socket and expert URI general mode. * printer.pm: fixed bugs, start lo interface before cups. 2000-09-04 Franois Pons * printerdrake.pm: added pnm2ppa and lm110 support in cups configuration. probe for printer device (parallel) and try to install usb for printer. * printer.pm: removed local printer configuration for cups (keep only local configuration using URI). 2000-09-01 Franois Pons * Xconfigurator.pm: fixes to configure XF86Config-4 when XFree-3.3 is installed, make 16bits by default on 3D hardware acceleration, fixed selection of hardware for hardware acceleration. * install_steps.pm: add cups for printer configuration, used for auto_install. added new function to add packages only if requires are already satisfied. * standalone/printerdrake: updated. 2000-08-31 dam's * moved many things to network.pm and any.pm * everything should be broken now. 2000-08-31 Franois Pons * install2.pm: removed printer default config (now obsoleted). * install_steps_interactive.pm: add cups support. * printerdrake.pm: add cups support. * printer.pm: add cups support. 2000-08-31 Frederic Lepied * install_any.pm (setPackages): install the right glide module according to the Voodoo card detected. * Xconfigurator.pm (write_XF86Config): ZAxisMapping for XF 4. (autoDefaultDepth): default depth to 16 for Voodoo cards except for Voodo5 ones. 2000-08-29 dam's * moved pppConfig in netconnect.pm and any.pm * moved miscellaneousNetwork in any * modem configuration is now useable in standalone mode. 2000-08-29 David BAUDENS * install_steps_interactive.pm: change Small/Normal/Full -> Minimum/Recommanded/Complete (aka make FredB happy) 2000-08-28 dam's * draknet (netconnect): renamed drakfuck -> draknet. standard ADSL and french alcatel ADSL implemented. * Xconfigurator.pm (autologin) : use of the new autologin system. 2000-08-24 Franois Pons * ../update_kernel*: changed reference from extract_archive to packadrake. * Makefile*: added live_install and live_install2. * Xconfigurator.pm: updated Mach64 acceleration to only 3D Rage Pro AGP card type, commented SiS and S3ViRGE support by GLX. * commands.pm, keyboard.pm, lang.pm, pkgs.pm, list, tools/*: updated to use packdrake now. * install2.pm, install_steps.pm, install_steps_gtk, Makefile*: manage live upgrade. * modules.pm: use standard modprobe command for load in live upgrade. * netconnect.pm: added minimal modification for being compilable. * rescue/list: added packdrake and sfdisk. * live_install, live_install2: live upgrade of package. 2000-08-22 dam's * drakfuck (netconnect):finished isdn PCI/ISA card implemetation * added isdndb.net: providers database 2000-08-20 dam's * moved Netconnect.pm to netconnect.pm * moved DrakFuck to drakfuck 2000-08-18 Pixel * share/Cards+: for i810, force VideoRam 2000-08-18 dam's * modules.pm: added isdn type in @drivers_by_category. corrected load_thiskind (thx pixel) : it's not unsafe anymore * Netconnect.pm: just display PCI isdn card recognized. 2000-08-17 Pixel * install_any.pm: many cleanup. moved some functions to common, any or install_interactive (newly created) 2000-08-16 dam's * install_steps_interactive.pm(configureNetwork): added call to isdn configuration * added standalone/DrakFuck: standalone entry point to configure internet connexion. * added Netconnect.pm: internet connexion functions. 2000-08-11 Pixel * install_steps_interactive.pm (selectInstallClass): yet a bigger warning so that people don't choose expert installs. Also set the focus on "Custom" by default. * install_steps_interactive.pm (doPartitionDisks): created, calls the wizard. * install_steps.pm (doPartitionDisksBefore, doPartitionDisksAfter): created (was mainly in install2::doPartitionDisks) * install2.pm (doPartitionDisks): much cleanup * install_any.pm (partitionWizard): working state (still rough) 2000-08-08 Pixel * standalone/rpmdrake (AddMedia): fix the ftp addmedia, fix the cdrom addmedia 2000-08-07 Pixel * diskdrake.pm (Resize): * install_steps_gtk.pm (doPartitionDisks): remove the before_leaving ensuring the filehandle is closed * resize_fat/main.pm (DESTROY): use a better solution for ensuring the filehandle is closed 2000-08-07 Franois Pons * Xconfigurator.pm: added SiS6326 in the list of chipset that needVideoRam, reported on ml. * install_steps.pm: fixed auto install of printer. 2000-08-06 Pixel * interactive.pm (ask_from_listf): created this GREAT function that should have been created a long time ago. * any.pm, install_any.pm, install_steps_gtk.pm, install_steps_interactive.pm: a lot of rewrite to use the new ask_from_listf, a lot of nice cleanup! * fs.pm (df): created, returns the free space of the part. Save it in $part->{free} * install_steps_gtk.pm (doPartitionDisks): ensure the closing of the device in case of error * resize_fat/main.pm (new): ensure the closing of the device in case of error * install_any.pm (partitionWizard): the great partitioning wizard is created. Not finished yet (nor called from anywhere) * install_steps.pm (doPartitionDisksLnx4win): created function out of doPartitionDisks * install_steps_gtk.pm (installPackages): removed the displaying of size to install (people are bothered cuz not the same size) 2000-08-06 dam's * install_steps_gtk.pm (create_steps_window): use drawing area instead of button. Implemented all steps events. 2000-08-05 Pixel * mouse.pm (detect): test a hack for usb mouse via hub (sparhawk@enteract.com) * fsedit.pm (undo): force isDirty and needKernelReread only if hd hasBeenDirty, otherwise believe the flag saved * partition_table.pm (write): flag hd as hasBeenDirty * install2.pm: a few renaming of methods so that the step names correspond to install2 function and install_steps* methods (eg: configureX & setupXfree unified to configureX) 2000-08-04 dam's * any.pm (setAutoLogin): added this method to write xdm-config * Xconfigurator.pm: clenead autologin code and use of above method 2000-08-04 Pixel * pkgs.pm (setSelectedFromCompssList): save $nb to able to restore it in case of max_size reached. only purpose is the log! * install_steps_interactive.pm (choosePackages): in newbie, ask between Small/Medium/Full install * install_steps_interactive.pm (choosePackages): in expert, have the min_mark be 0 instead of 1 * common.pm (find_index): added this nice function * install_any.pm (getAvailableSpace_mounted): use common::df * loopback.pm (getFree): use common::df * commands.pm (df): use common::df * common.pm (df): added * diskdrake.pm (Resize)): add resizing of reiserfs * share/list.i386: add resize_reiserfs 2000-08-02 dam's * Xconfigurator.pm : autologin is functionall. When wmsession.d is more up to date, I'll add the list of wm to launch at boot. It writes in /etc/X11/xdm/xdm-config. 2000-08-01 Pixel * install2.pm (miscellaneous): modify as chmouel want (aka, "" instead of "no" for MOUSE and KEYBOARD in sysconfig/usb) * services.pm: separation between interaction and action. * install_steps.pm (servicesConfig): the job is now done here * install_steps_interactive.pm (servicesConfig): only the asking part 2000-08-01 Franois Pons * pkgs.pm: fixed the below fixe, now ok. * Xconfigurator.pm: fixed a bug for using default card flags setting, add support for GeForce DDR for both 3.3 and 4.0. * pci_probing/pcitable: fixed NV15 (GeForce2) card entry, now use XFree 3.3 as unsupported in XFree 4.0. * share/Cards+: added "NVIDIA GeForce2 DDR (generic)". 2000-07-31 Franois Pons * pkgs.pm: fixed provided package with choice in deps used with a base package, complicated but kernel-fb or similar can be unselected now. 2000-07-27 Franois Pons * install_steps_interactive.pm: changed expert message to ask using XFree 3.3 instead of XFree 4.0 used by default (server). * Xconfigurator.pm: make sure only one server is installed, default to XFree 4.0 if supported unless XFree 3.3 accept 3D acceleration and not XFree 4.0, ask user in such case. * pci_probing/pcitable: added Intel 815 pci ids. 2000-07-26 dam's * install_steps_gtk.pm: applied new LN stars, logo title and help logo. improved steps appearences. * modified share/step-*.xpm * added share/help.xpm * updated ../HACKING to ling help logo. 2000-07-21 Franois Pons * Xconfigurator.pm: enable 3D acceleration configuration with XFree86, use /usr/X11R6/lib/modules/glx-3.so for X version 3 Utah-GLX accelerated module. 2000-07-20 dam's * Xconfigurator.pm: use {miscellaneous}{autologuser} instead of {miscellaneous}{autologuser} + {miscellaneous}{autologing}. * move some README content to ../HACKING 2000-07-19 dam's * Xconfigurator.pm: added autologin boxes. result is in {miscellaneous}{autologin} and in {miscellaneous}{autologuser} 2000-07-19 Franois Pons * any.pm: added default root to existing root device when adding an entry in bootloader. * bootloader.pm: avoid duplicating entry (floppy and old-floppy) when they are identical. manage hackkernel by suggest an entry by default if installed. * install_steps.pm: reworked symlink closure for bootloader to keep previous configuration. 2000-07-11 Franois Pons * bootloader.pm: merged lilo.pm and silo.pm inside bootloader.pm, this include a configure_entry from silo.pm to build a initrd if used. * share/compssList: added kde2 packages. * share/compssUsers: added kde2 group, renamed kde to kde1 group specific. 2000-07-07 Franois Pons * install2.pm (choosePackages): always execute setPackage to copy hdlist* and depslist files (support mixed partitionDisks and choosePackages). * install_any.pm (setPackages): avoid clearing upgrade flag. * install_steps.pm (choosePackages): use $first_time to avoid reselection of packages according to compssList. * install_steps_interactive (choosePackages): use $first_time and $individual to avoid reselection of packages according if user go back to step choosePackages. * pkgs.pm: added psUpdateHdlistsDeps to restore hdlist* and depslist files in /var/lib/urpmi. * diskdrake.pm: fixed uneditable combo for Mount point action. 2000-06-23 Franois Pons * Xconfigurator.pm: better approach for Sun* server in newbie. * fs.pm: added romfs support for mount. * fsedit.pm: changed auto allocation for partitions for sparc*. * install2.pm: restored bootdisk creation and auto install boot disk creation for sparc*. * install_any.pm: changed vfat to romfs when mounting kickstart floppy on sparc*. * install_steps.pm: avoid proposing formating sunos partition. * install_steps_interactive.pm: boot disk for sparc* and support for installation of SILO on /boot partition (sparc*). * install_steps_newt.pm: removed cylinder 0 bug warning. * interactive.pm: fixed typo for not_edit set to 1 by default. * partition_table.pm: fixed get_holes on sparc* where a whole disk partition caused problems. * partition_table_sun.pm: removed cylinder 0 bug as found in mke2fs. * silo.pm: handle /boot partition, install silo.conf in /boot and make a symlink from /etc. * share/list.sparc: added losetup and genromfs for boot disk creation. 2000-06-21 Pablo Saratxaga * lang.pm: changed the way console font data is written; not all of the [0], [1], [2] values must defined, so three cases must be used. Also added a variable $CHARSET for /etc/sysconfig/i18n; it can then be used by console-tools to load the proper compose table 2000-06-20 Franois Pons * c/sbus.c: added some functions for silo.c integration. * c/silo.c: initial release including write in prom, and translation of disk name from openprom to linux, rh version modified. * silo.pm: added write in prom, support of sunos boot from silo. * partition_table.pm: added support for ufs partition like windows one. * install_steps_interactive.pm: added other entries in silo. * install_steps.pm: support sunos partition. * install_any.pm: automatically mount sunos partition with diskdrake. * fsedit.pm: added /mnt/sunos suggested mount point. * fs.pm: added ufs support for mount. 2000-06-19 Franois Pons * crypto.pm: modified for getting sparc crypto file for sparc*. * modules.pm: make sure to load sd_mod when needed. * pci_probing/main.pm: always use loaw_endian in pci structs. * pci_probing/translate-pcitable.pl: added arch specific module name translation. 2000-06-16 Pixel * modules.pm (write_conf): rename conf.modules to modules.conf if needed. Outputs to modules.conf * detect_devices.pm (cdroms): fix using scd0 for ide-burners when already a scsi cdrom drive 2000-06-13 Pablo Saratxaga * pkgs.pm: added 'acon' requirement for all right-to-left languages 2000-06-07 Franois Pons * diskdrake.pm: added SunOS partition as blue for diskdrake. * install_steps_interactive.pm: make sure of no division by zero may happen. * install_steps_newt.pm: added WARNING for fdisk on sparc*. * modules.pm: make sure of loading sd_mod module after any scsi module. * sbus_probing/main.pm: insmod openprom before trying sbus probing. * pkgs.pm: corrected by use of parabolic solution for size approximation. * silo.pm: try with "silo -p 2 -t" if "silo -t" has failed due to bad probe. 2000-06-05 Pablo Saratxaga * install_steps.pm,lang.pm: added load_console_font, to load the proper console fonts (text mode install is not very useful otherwise) 2000-06-03 Pixel * diskdrake.pm (Create): don't accept less than 32MB part for reiserfs * diskdrake.pm (Type): don't accept less than 32MB part for reiserfs 2000-06-01 Pablo Saratxaga * share/fonts.tar.bz2: replaced the Korean 16pt fonts by a 12pt font; it fits better with the other fonts. Added a 'README' file with some comments and the required copyright notice 2000-05-29 Franois Pons * Xconfigurator.pm: added support for SBUS card autodetection. * commands.pm: added lssbus to list SBUS devices detected. * detect_devices.pm: removed alpha restriction on USB. * install_steps_interactive.pm: added SBUS support. * c/sbus.c: initial revision, core SBUS support (inspired from kudzu). * c/stuff.xs.pm: added wrapper for sbus.c interface. * sbus_probing/main.pm: initial revision (inspired from kudzu). 2000-05-27 Adam Lebsack * share/list.ppc: various PPC modifications, for HFS * partition_table_mac.pm: bug fixes * partition_table.pm: various HFS fixes, isHiddenMacPart() * diskdrake.pm: added HFS to top buttons when run on PPC * keyboard.pm: fixed name of mac-fr2-ext keymap * install_steps_gtk.pm: added Xpmac server support for PPC. * install_steps_interactive.pm: disallow hardware configuration on PPC for now. All drivers should be in the kernel. setup_this_kind(). * fsedit.pm: fixed verify_hds for PPC, /proc/partitions will never match our partition table read. Added PPC grep condition for PPC in get_visible_fstab. * fs.pm: fix argument for HFS formatting. * Makefile: special installation of PPC files. 2000-05-25 Chmouel Boudjnah * standalone/drakboot: Don't display Configure-/LILO/GRUB/ on alpha|sparc. 2000-05-25 Franois Pons * silo.pm: added configure_entry to try creating an initrd for an image entry in bootloader. fixed wrong usage of run_programm::rooted with 2>. * commands.pm: fixed insmod command to take modules64.cz* on sparc* * install2.pm: removed create boot disk and create auto install disk on sparc*. force writing of /etc/conf.modules for step setupBootloader. * install_steps.pm: fixed upgrade for sparc* and disable supermount for sparc*. * install_steps_interactive.pm: added missing $prefix for glob_. call configure_entry in setupSILO. fixed cancel or None entry on setupBootloader. * modules.pm: updated alias for sparc*. * any.pm: fixed proprable wrong test for setupBootloader in beginner at the very beginning. * printer.pm: fixed typo. * Xconfigurator.pm: avoid testing if using a Sun* server, added depth and resolution for these server too. 2000-05-24 Franois Pons * partition_tabel.pm: fixed wrong detection of DOS partition on sparc*. * partition_table_sun.pm: fixed a bug when reading partition table with unused partition in the middle of the table. 2000-05-23 Franois Pons * common.pm: update arch to take into account sparc and sparc64. added better_arch and compat_arch function. * silo.pm: fixed adding new kernel automatically. * install2.pm: removed create boot disk stuff for sparc*. * install_steps.pm: added initrd generation for alpha. added ldconfig at end of installation. removed /usr/bin/dumpkeys existence test on sparc*, should be added in the future. * install_steps_interactive.pm: removed supermount for sparc*. * install_steps_gtk.pm: added /dev/kbd device creation and permedia2 support for sparc*. removed screen limit of 1024x768. * detect_devices.pm: fixed problem on machine with really no IDE interface. * modules.pm: added support for 32 and 64 bit architectures on sparc*. * install_any.pm: fixed getAvailableSpace_mounted if /usr is not a separate partition. * pkgs.pm: added support for multi-arch rpm file (need for sparc*), fixed correctSize and invCorrectSize to take back a linear approximation above 9Gb approximatively. removed ftp rewind as broken currently. * keyboard.pm: fixed bad list of available keyboard (broke sparc*), fixed globing (removed) against existing '*'. * partition_table.pm: removed support for non SUN partition table, as it may freeze the kernel or may be blanked? * Xconfigurator.pm: take Sun24 server by default on sparc*, add support for permedia2 card (3DLabs server). * share/list.sparc: added perl-5.6.0 for sparc*, fixed for sparc*. * Makefile: added support for modules and modules64 for sparc*. * c/stuff.xs.pm: added kernel_arch function for getting the current true architecture provided by the kernel (uname -m). 2000-05-09 Pixel * install_any.pm (kdeicons_postinstall): the URL link to doc must be $lang/index.html, not only $lang. * standalone/mousedrake: add handling of XF86Config-4 * any.pm (setupBootloader): fix bug (was adding 2 glob_'s) 2000-05-08 Pixel * install2.pm (main): move the touch of some files here to please linuxconf * install2.pm (miscellaneous): s/KBD/KEYBOARD/ * lilo.pm (install_grub): don't keep symlinks for reiserfs * lilo.pm (suggest): allow grub everytime now (not only if !reiserfs) * install_any.pm (getHds): default mount point for windobe in lowercased for StartOffice(!) 2000-05-08 Pablo Saratxaga * share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards * keyboard.pm: Added new Lithuanian keyboard and changed the string for brazilian ABNT-2 to state more clearly its ABNT nature (it is not a standard PC keyboard; it uses some different keycodes) 2000-05-07 Pixel * install_steps.pm (choosePackages): return availableCorrected instead of available * pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's) * modules.pm (text2driver): same as text2lang below * keyboard.pm (text2keyboard): same as text2lang below * lang.pm (text2lang): replace the while (... each) by a foreach (keys) (because each is dangerous if loop is exited) * install_steps_interactive.pm (selectKeyboard): better handling of multiple langs question. * ftp.pm (new): Timeout set to 60 (seconds), was default (120) * install_steps_interactive.pm (setup_thiskind): remove ide-* from modules displayed as loaded. 2000-05-06 Pixel * fsedit.pm (check_mntpoint): verify that standard mntpoints (/ /usr) are not on not trueFS * any.pm (setupBootloader): add $prefix for the 2 glob_'s 2000-05-07 Pablo Saratxaga * share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua 2000-05-06 Pablo Saratxaga * printerdrake.pm: fixed English error 2000-05-05 Pixel * Xconfigurator.pm (monitorConfiguration): remove the special case for fbdev. * install_steps_interactive.pm (setup_thiskind): replace return by next in case load_module fails. * install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade * Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's * Xconfigurator.pm (testFinalConfig): force $bad_card for xf4 * pkgs.pm (correctSize): updated for 7.1 * install_any.pm (getAvailableSpace): move the removing of $minAvailableSize here. 2000-05-04 Pixel * install2.pm (configurePrinter): give clicked to printerConfig * interactive.pm (ask_from_entries_ref): set default val if not_edit * interactive_newt.pm (ask_from_entries_refW): remove setting of default val. Now done in interactive::ask_from_entries_ref * interactive_gtk.pm (ask_from_entries_refW): handle empty value * modules.pm (read_already_loaded): ensure that already loaded modules are put in %loaded. * modules.pm (load_ide): add loading if ide-probe-mod (for new kernel) * lilo.pm (install_lilo): truncate label's to 15 chars * install_any.pm (generate_ks_cfg): fix missing space * install_any.pm (generate_ks_cfg): fix bug for nfs comand * install2.pm: get rid of autoformat * install_steps.pm (choosePartitionsToFormat): get rid of autoformat 2000-05-03 Pixel * any.pm (setupBootloader): replace ask_many_from_list by ask_from_list for bootloader choice * services.pm (drakxservices): stop immediately service if removed * install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd * install_steps.pm (afterInstallPackages): touch some files to please linuxconf 2000-05-03 Franois Pons * install_steps.pm: updated min size, fixed kppprc generation. * install_any.pm: make sure postinstall-rpm is here before erasing (avoid error on reboot only). 2000-05-02 Pixel * raid.pm (format_part): don't call raid::make if part is already formatted (as raidstop fails) * Xconfigurator_consts.pm: Rage128 and 3dfx are not available any more * install_steps_interactive.pm (setup_thiskind): make insmod'ing fail a simple warning. * Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB * share/MonitorsDB: take new one from RedHat * standalone/drakboot: added kfloppy * g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly not to have it) 2000-05-01 Pixel * install_steps_interactive.pm (setRootPassword): remove NIS_server, use NIS instead * install_any.pm (setAuthentication): remove NIS_server, use NIS instead * standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist 2000-04-28 Pixel * install_steps.pm (afterInstallPackages): fix yet another bug for ttf from windobe handling * install_steps_interactive.pm (selectInstallClass): hide beginner mode in corporate. Display special help. 2000-04-29 Pablo Saratxaga * my_gtk.pm: added call to Gtk->init; that makes 16 bit locales text to be properly aligned (reported by Craig Chang ) * common.pm: now that po handling is correct, I changed the order of reading variables so that it follows the standards ($LANGUAGE first) * share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251 2000-04-28 Franois Pons * install_steps*.pm: added support for selection of package during upgrade the same way it is done for installation. added check of minimal size, abort else (at least let the user know about :-) fixed crypto if no network interface available. * install2.pm: fixed problem during upgrade that lost network configuration. 2000-04-28 Pixel * modules.pm (load_raw): don't call commands::insmod, do it in place. Merge with load_multi * install_steps.pm (afterInstallPackages): fix windobe ttfonts symlinking * Xconfigurator.pm (cardConfiguration): load module agpgart for i810 * install_any.pm (getHds): changed the mount point setting for windows partitions as device_windobe is not unique 2000-04-27 Pixel * install_steps_gtk.pm (create_steps_window): changed to adapt to new hidden format * install2.pm (@installSteps): changed the way hidden is handled. Now it is a true perl expression (great power now) * install_steps_gtk.pm (selectInstallClass1): update steps window before asking normal/devel/server. Nicer! * install_steps_interactive.pm (configureNetwork): when "Cancel" pressed at network interface configuration do not skip all configuration. 2000-04-26 Franois Pons * install_steps.pm (pppConfig): modified a lot, removed template file for ifcfg and chat file. 2000-04-26 Pixel * install_steps_gtk.pm (choosePackagesTree): use a fix width for the tree column (so that the checkbox are always visible without scrolling) * standalone/drakboot: drakfloppy and gfloppy are X only, no need to propose them in console * install_any.pm (relGetFile): added auto_inst to files to get from Mandrake/base * install2.pm (main): changed auto_inst behaviour * standalone/adduserdrake: fix a bug (s/$o/$in/g) * interactive_newt.pm (ask_from_entries_refW): now handling complete/changed/focus_out callbacks (at least more than before) * Newt/Newt.xs: added rough callback handling 2000-04-25 Franois Pons * printerdrake.pm: added support for PPA more easily, allow printers entry using ppa driver event if pnm2ppa not installed, install it if neccessary after. * network.pm, install_steps.pm, install_steps_interactive.pm: added support for stoping a network interface, usefull for ppp0 to avoid using it too long. * install_steps.pm: fixed missing local on pap_secrets file. 2000-04-25 Pixel * lilo.pm (install): moved the generation of the keytable here. It is used by both lilo & grub (lilo is not always installed as was assumed) * common.pm (formatAlaTeX): remove bounding spaces * pkgs.pm (setSelectedFromCompssList): remove the hack for min mark 25 in beginner * install_steps_interactive.pm (choosePackages): set $min_mark to 25 in beginner 2000-04-24 Pixel * install_steps_interactive.pm (setupXfree): add a yesorno question for choosing between XF4 and XF3 in expert * install_steps_gtk.pm (choosePackagesTree): enlarge the tree window * install_any.pm (update_userkderc): make sure uid and gid are kept * diskdrake.pm (Create): add Extended_0x85 as a choice for expert * partition_table.pm (add_extended): handle a 3rd arg, $extended_type to tell which kind of extended partition is wanted * partition_table.pm (adjust_main_extended): in non-expert, automatically set extended to linux-extended if there's only linux-type partitions. 2000-04-22 Pablo Saratxaga * install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit and not for byte. RAM is expressed in megabytes -> MB 2000-04-19 Franois Pons * install_steps_interactive.pm: fixed crazy mutli CD manipulation. * printer.pm: fixed wrong prototype of print_pages. * install2.pm: set version to 7.1 for crypto stuff. * crypto.pm: commented ackbar crypto site. 2000-04-17 Pixel * lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by linuxconf) 2000-04-14 Pixel * install_steps_interactive.pm (choosePartitionsToFormat): don't ask about checking bad blocks for reiserfs, cuz not handled * fs.pm (mount): reiserfs handling * fs.pm (format_reiserfs): added * fs.pm (write_fstab): add option "notail" for reiserfs if the partition holds the kernel (/boot or /) * partition_table.pm (isTrueFS): added, replaces most occurences of isExt2 2000-04-12 Franois Pons * install2.pm: force installation step if package have been selected on step choose packages. * install_any.pm: protected against die in perl (setstep or theme_changed). 2000-04-11 Franois Pons * resize_fat: added some limits verification. * interactive_gtk.pm: corrected swap of arg with help adding. 2000-04-10 Franois Pons * interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list, which is used by printerdrake only. drops key bindings. 2000-04-07 Franois Pons * tools/serial_probe: obsoleting pnp_serial which is now replaced by this one, taken from kudzu, really faster and probe all serial devices at one time. modified to probe correctly modem :-) * mouse.pm: updated to use serial_probe interface of detect_devices.pm. * detect_devices.pm: modified to use serial_probe, cache probed devices to avoid reprobing. 2000-04-06 Franois Pons * install_steps_interactive.pm, install_steps.pm: added support for peerdns options of ppp, so removed dns address unless expert. 2000-04-05 Franois Pons * crypto.pm, install_steps_interactive.pm, install2.pm, install_steps.pm: added crypto stuff to support hdlist-crypto.cz2 and depslist-crypto. dependancies are not supported but with a simpler format of depslist file where closure are not done and only package name are used for dependancies. * pkgs.pm: added better support for multi CD manipulation, including selection and refus. 2000-04-04 Franois Pons * pkgs.pm: modified selection packages from compssList by incremental selection, much more quickly. added selected medium for selecting a package. * install_any.pm: refused media hash transfered to selected value of media table. @needToCopy list should only have package of default medium. 2000-04-03 Pixel * fs.pm (format_ext2): add options "-b 1024 -O none" for alpha 2000-03-31 Franois Pons * install_steps_gtk.pm: made changeMedium sub modification permanent. * pkgs.pm: modified upgrade to avoid use of header. 2000-03-31 Pablo Saratxaga * keyboard.pm: some more choices for PPC keyboards 2000-03-30 Franois Pons * install2pm: added eval around loading af_packet and postinstall copy of RPMS. * devices.pm: added /dev/kdb for SPARC. * install_any.pm: modified multi CD management, postinstall copy of RPMS. * install_steps_gtk.pm: added support for Xsun server for SPARC. * install_steps_interactive.pm: added multi CD dialog box for selecting CD available. Serialized ethernet configuration and ppp configuration. * pkgs.pm: added check for infinite recursion for bad depslist. * printer.pm: better test for reparse of printerdb. * Xconfigurator.pm: added support for Xsun server for SPARC. 2000-03-30 Pixel * install_steps_gtk.pm (choosePackagesTree): enhance tree selection 2000-03-29 Pixel * interactive_gtk.pm (wait_messageW): add some padding (nicer) * install_steps_interactive.pm (generateAutoInstFloppy): created, creates a floppy for auto installs. * install_any.pm (generate_ks_cfg): created, generates stage1 ks.cfg file * share/po/DrakX.pot: added special comment for grub entry 2000-03-28 Pixel * install_steps_interactive.pm (selectKeyboard): sort langs for many-lang install * mouse.pm (write): add WHEEL telling if a wheel mouse is there 2000-03-28 Pablo Saratxaga * keyboard.pm: added entries for all three Armenian keyboards 2000-03-26 Pixel * install_any.pm (install_urpmi): full support for multi-hdlist's * pkgs.pm (extractHeaders): look for hdlist in /tmp instead of $prefix/var/lib/urpmi * pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a fake name. Access via /tmp/$hdlist is given for non-fake name * detect_devices.pm (hasHPT): return undef if no htp (silly me :-/) 2000-03-25 Pixel * lilo.pm: updated to the new format of entries. It was an hash. Now the key is field kernel_or_dev, and entries is an array. (get): added, it returns the entry using a kernel (needed because entries is no more a hash) * install_steps_interactive.pm (setupLILO): adapted to the new format * Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling * fsedit.pm (suggest_part): if suggested part contains a field "hd", ensure the partition is created on this hard drive * install2.pm (main): before leaving installation, remove /var/lib/urpmi if urpmi not installed * diskdrake.pm (Resize): ext2resize to size $part->{size} instead of $size 2000-03-24 Pixel * detect_devices.pm (hasHPT): added. Now nice handling of hpt366 (ultra66) without rebooting and making special floppy :) * lilo.pm (install_grub): much better grub configuration (better than lilo's :pp) * install_steps.pm (setupBootloaderBefore): remove entry floppy for security > 3 2000-03-23 Pixel * install_steps_gtk.pm (selectMouse): added, takes care of telling the X server if the user changed the mouse type. Only done if a serial mouse is chosen. * install_steps_newt.pm (doPartitionDisks): add a call to * mouse.pm (write): added "device=" in etc/sysconfig/mouse for devfs (it looses the symlink /dev/mouse) 2000-03-22 Pixel * pci_probing/pcitable: replace Server:Rage128 by proper XFree entry 2000-03-20 Franois Pons * detect_devices.pm, fs.pm, install_any.pm: added supports for LS-120 floppy drive and icons on desktop of KDE (untested). * printer.pm, printerdrake.pm: added supports for PPA interface in new rhs-printfilters, always enable "Print text as postscript" option for such printers. 2000-03-20 Pablo Saratxaga * keyboard.pm: changed XKB name for Swedish keyboard changed XKB names for Russian and German keyboards added a choice for "Croatian" keyboard * share/compss{,List}: added various new locales-*, ispell-* and netscape-* files. changed ppa to pnm2ppa. 2000-03-17 Franois Pons * install_steps.pm: added setup for all configured queue. * install_steps_interactive.pm: modified for retrieving packages or current configuration. * printer.pm: correction, tested retrieve of printer configuration without printtool comments in printcap file: added update of entry according to gsdriver used (untested again). * printerdrake.pm: better handling of cancel, manage of multiple queue definition together (as lp|My printer). 2000-03-16 Franois Pons * install_steps_interactive.pm: moved in printerdrake.pm the test of printer usage. * printerdrake.pm: heavy modification to handle multiple queue, corrected some bugs too, added much more features as printtool. * printer.pm: added more features for filter, allow printer to be retrieved without help of printtool id in printcap file (untested). 2000-03-14 Pixel * diskdrake.pm (Loopback): handling of the file loopback: test existence of the file and take its size. 2000-03-14 Franois Pons * install_any.pm: corrected for duplicate file on other CD. 2000-03-13 Pixel * detect_devices.pm (floppies): don't return hash but the device name 2000-03-13 Franois Pons * pkgs.pm, install_any.pm: small correction for multiple media installation. * tools/syncrpms: added for handling synchronisation of multiple source rpm directories (and multiple target), include cleaning. * tools/closurepkgs: tools to get rpm that may be installed by DrakX after normal packages installation (printer, network, X11...), may be used to duplicate on other CD some important stuff of the first one. 2000-03-12 Pixel * install_steps_interactive.pm (choosePackages): compute the max_size very simply (sum of all package sizes), otherwise too costly * pkgs.pm (install): call cleanHeaders at the end * pkgs.pm (cleanHeaders): created * install2.pm (miscellaneous): /etc/msec/init.sh is now /usr/sbin/msec (yoann thanks for not telling :pp) * pkgs.pm (install): remove the $prefix of mountpoints for not enough room to install error message 2000-03-11 Pixel * my_gtk.pm (_create_window): add callback on focus to ensure_focus. The result is no more 3 focus states with 2 buttons. * interactive_gtk.pm (ask_from_treelistW): better keyboard handling * raid.pm (make): check the result of mkraid. Suggest raidtools are missing in standalone diskdrake * devices.pm (set_loop): created, searches for an available loopback and sets the file to it * lilo.pm (dev2grub): fixed a missing slash * interactive_gtk.pm (wait_message_nextW): do not update if same message, otherwise silly gtk won't do anything and we'll wait forever :( 2000-03-10 Franois Pons * *.pm: heavy modification to take into account multiple media installation. 2000-03-10 Pixel * install2.pm (@install_classes): cleanup, no more i18n (is now in install_steps_interactive), remove old entries 2000-03-09 Pixel * modules.pm (write_conf): don't add alias block-major-11 in every case * modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss) * fs.pm (format_*): move the @options before the device * loopback.pm: created, added a lot of stuff for loopback in diskdrake.pm, fs.pm... 2000-03-08 Pixel * partition_table.pm: %type2fs replaced ox402 by 0x402 * detect_devices.pm (cdroms): fix "scd" (should be "scd0") * install_any.pm (install_urpmi): update for new hdlist.cz2 2000-03-07 Pixel * interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/ * install_steps_interactive.pm (addUser): force add a normal user for security 4 2000-03-05 Pixel * my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row (tis the Gtk-Perl 0.7002 was of doing) 2000-03-04 Pixel * modules.pm (write_conf): add ide-floppy to the modprobes of post-install supermount 2000-03-03 Pixel * commands.pm (ps): add RSS to ps command 2000-03-02 Adam Lebsack * mouse.pm: added mac mouse detection to mouse::detect. * detect_devices.pm: added a routine to probe /dev/usbmouse on macs. 2000-03-01 Franois Pons * *.pm: heavy modification to take into account smaller transaction during installation. still a lot of test to perform, no provides updated currently and building of hdlist.cz2 and depslist.ordered need old files... nothing done for hdlist.gz during post installation, but hdlist.cz2 is already copied in /var/lib/urpmi [and is used during installation of packages as extract_archive need a true file]. 2000-03-01 Pixel * lilo.pm (install_grub): creation * network.pm (write_interface_conf): ONBOOT = !pcmcia * install_steps_gtk.pm (new): more intelligent SIGCHLD handler 2000-02-29 Pixel * modules.pm: moved common network stuff from "net" to "network" (modules like nfs lockd...) * fs.pm (write_fstab): moved the sort to the right place * services.pm (drakxservices): chkconfig --list is i18n'ed :( set LANGUAGE=C before * partition_table_raw.pm (get_geometry): geom{cylinders} must not be a decimal value :) * install_steps_gtk.pm (create_logo_window): set_name logo for logo window * share/install.rc: force disabling of background image theme * install_steps_gtk.pm (enteringStep): add step information for console 1 * any.pm (addKdmIcon): new function * install_steps.pm (addUser): handle field icon * install_steps_interactive.pm (addUser): add choice of kdm icon * standalone/adduserdrake: add choice of kdm icon * diskdrake.pm (ask_all_data...): change for easier i18n * install_steps.pm (miscellaneous): add CLEAN_TMP handling (need cleaning?) * install_steps_interactive.pm (miscellaneous): add CLEAN_TMP option in expert * install2.pm (miscellaneous): add CLEAN_TMP option for /etc/sysconfig/system * install_steps_interactive.pm (miscellaneous): forbidden useSupermount if high security. * mouse.pm (detect): fix bug (ttyS instead of ttyS0) 2000-02-28 Pixel * install_steps_gtk.pm (createXconf): do not use "Generic VGA" for svga and accel. SVGA also wants 16 bpp. added ugly modeline for 800x600. * partition_table_raw.pm (get_geometry): when the HDIO_GET_IDENTITY fails, defaults to what GETGEO gave * install2.pm (main): use modules::load_multi to increase boot start time * modules.pm (load_multi): added this function for loading many modules at once. * install_steps_gtk.pm (new): increase time before timeout * detect_devices.pm (cdroms): change the device associated with ide-burners (hdX -> scdX). Problem is how to know the X in scdX :( * modules.pm (write_conf): sort scsi_hostadapter's 2000-02-27 Pixel * install2.pm (main): load ide-probe and the like in 'prereq' type so no aliases are added to conf.modules 2000-02-25 Pixel * devices.pm (make): small code cleanup * partition_table_raw.pm (adjustEnd): more explicit error message * fsedit.pm (allocatePartitions): fix a bug (size was getting too big after each allocation) making adjustEnd cry 2000-02-24 Pixel * interactive_gtk.pm (new): added the "new" method to initialize windowheight for isStandalone * install_steps_gtk.pm (new): returns undef in case no X server works * install2.pm (main): moved the ejectCdrom from install_steps::END to here * install2.pm (main): fix the $SIG{SEGV} handler * install2.pm (main): added a "try again" in text install if the "new" fails * install_steps_interactive.pm (createBootdisk): fix an error for non fdX choice of floppy drive * install_steps_interactive.pm (setup_thiskind): remove the "defined @l" 2000-02-23 Pixel * install2.pm (%suggestedPartitions): remove any /boot entries * install2.pm (selectInstallClass): removed the special code to /boot entries from suggestedPartitions for on non-intel (and it was buggy :) * fsedit.pm (@suggestions): remove the /boot entry * fsedit.pm (check_mntpoint): remove the 1024 cylinder check * fsedit.pm (suggest_part): remove the 1024 cylinder special case * install_steps_interactive.pm (setupLILO): replace linear option by lba32 * lilo.pm (suggest): add lba32 by default * install_steps_interactive.pm (load_thiskind): moved the HPT stuff to install_any::ultra66 and call it. Add sound card configuration (3 lines :) * my_gtk.pm and interactive_gtk: resize the list and tree based on root window size * install_steps_gtk: $width and $height goes $::rootwidth and $::rootheight, also other dimensions goes global (main::) * commands.pm (strings): replace the typo \{$n,} by {$n,} 2000-02-23 Franois Pons * build_archive, extract_archive: changed format of TOC to speed up extraction of archive, now 5 to 6 times faster to read TOC :-) 2000-02-22 Pixel * Xconfigurator.pm: load "Cards" database only to translate NAME to fields. Added file CardsNames created from Cards using share/Cards2CardsNames. Kind of list of normalized NAMEs * MonitorsDB: replace the ` ' separator for vendor by `|' * install_steps_interactive.pm (timeConfig): use ask_from_treelist * interactive_gtk.pm (ask_from_treelist): creation of ask_from_treelist. Usage is just the same as ask_from_list with one more argument (the separator eg: |, /) 2000-02-21 Franois Pons * diskdrake.pm: fixed deadlock while trying to create partition when available space is equal or less than 2 cylinders. fixed Create action on corrupted partition by removing stalling window. Blocked partition table writing if there are error by forcing user to correct partition table. * partition_table.pm: fixed typo in verifyParts with cdie, added verifyParts on Resize action. 2000-02-21 Pixel * install_steps_gtk.pm (create_big_help): display the help in full screen * my_gtk.pm (_create_window): add big help on F1 * common.pm (add2hash): now returns the first parameter * mouse.pm (detect): really defaults to serial mouse * interactive.pm: add ask_many_from_list_with_help and ask_many_from_list_with_help_ref * services.pm: creation, it handles what was in standalone/drakxservices 2000-02-18 Pixel * install_steps_gtk.pm (createXconf): added /dev/ (X wants "/dev/psaux" and not "psaux") * diskdrake.pm (Create): show start sector even for non-expert on non-i386 2000-02-16 Pixel * mouse.pm (detect): add defaults to serial mouse * install_steps_gtk.pm (createXconf): remove the defaults to serial mouse 2000-02-15 Pixel * diskdrake.pm: "After %s partition %s," inlined otherwise does not please pablo and translators... 2000-02-14 Pixel * diskdrake.pm (Create): hide start sector choice for non-expert 2000-02-11 Pixel * partition_table_raw.pm (get_geometry): do not use the cylinder number given by HDIO_GETGEO cuz limited to 16bits. Compute using the total_sectors using HDIO_GET_IDENTITY * c/stuff.xs.pm: added total_sectors (gives the number of sector of a drive) * modules.pm (load): ignore error in loading prereq's * modules.pm (@drivers_by_category): rcpci instead of rcpci45, z85230 added * commands.pm (mount): add modules::load_deps otherwise the fs::mount won't succeed insmoding vfat if needed 2000-02-11 Franois Pons * fixed diskdrake to handle limit case when creating and resizing partition table, address size limit and start sector limit. 2000-02-11 Pixel * install2.pm (main): add a callback on SEGV -> message printed -> that way, ENDs are called (otherwise skipped) * install_steps_interactive.pm (setup_thiskind): handles the undef value returned by load_thiskind * install_steps_interactive.pm (exitInstall): do not call install_steps::exitInstall * install_steps (exitInstall): removed * install_steps (END): added (it does ejectCdrom) * install_steps_interactive.pm (load_thiskind): returns undef if error loading a module * fs.pm (format_part): changed the prototype from $;$@ to $;@ otherwise, @options always have a value (mostly undef) and mkdosfs fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32) * install_steps_interactive.pm (setup_thiskind): add a $auto_probe_pci that overrules $o->{auto_probe_pci} (that way no pci probe the second time) 2000-02-10 Franois Pons * heavy modification of build_archive and extract_archive to manage a TOC directly in archive file, handle bzip2 or gzip compression, extract_archive can extract multiple files a time, with minimal invocation of uncompress program and follow symlink and expand directory contents. * use build_archive/extract_archive for locales. * fixed a min/max in install_steps_gtk for Resize/Create partition. * fixed adjustEnd with dos partition table, take care of magic 63 sectors at beginning of partitions, a more solid method should be used for that. 2000-02-10 Pixel * modules.pm (load_thiskind): skip modules "unknown" and "ignore" 2000-02-09 Pixel * partition_table.pm (add): cdie if maximum number of partitions handled by linux is reached * Xconfigurator.pm (chooseResolutionsGtk): display the graphic card or server found * install_any.pm (relGetFile): for mdkinst files, take care not to have a double '/' (see debbugs #591) * install_steps_interactive.pm (configureNetwork): purpose: add ability to configure both modem and lan clean up the behaviour * fs.pm (write_fstab): purpose: sort the fstab per mount point (cuz /usr must be before /usr/local) also: rewrite of the part writing the fstab. 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725 8726 8727 8728 8729 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 8779 8780 8781 8782 8783 8784 8785 8786 8787 8788 8789 8790 8791 8792 8793 8794 8795 8796 8797 8798 8799 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 8820 8821 8822 8823 8824 8825 8826 8827 8828 8829 8830 8831 8832 8833 8834 8835 8836 8837 8838 8839 8840 8841 8842 8843 8844 8845 8846 8847 8848 8849 8850 8851 8852 8853 8854 8855 8856 8857 8858 8859 8860 8861 8862 8863 8864 8865 8866 8867 8868 8869 8870 8871 8872 8873 8874 8875 8876 8877 8878 8879 8880 8881 8882 8883 8884 8885 8886 8887 8888 8889 8890 8891 8892 8893 8894 8895 8896 8897 8898 8899 8900 8901 8902 8903 8904 8905 8906 8907 8908 8909 8910 8911 8912 8913 8914 8915 8916 8917 8918 8919 8920 8921 8922 8923 8924 8925 8926 8927 8928 8929 8930 8931 8932 8933 8934 8935 8936 8937 8938 8939 8940 8941 8942 8943 8944 8945 8946 8947 8948 8949 8950 8951 8952 8953 8954 8955 8956 8957 8958 8959 8960 8961 8962 8963 8964 8965 8966 8967 8968 8969 8970 8971 8972 8973 8974 8975 8976 8977 8978 8979 8980 8981 8982 8983 8984 8985 8986 8987 8988 8989 8990 8991 8992 8993 8994 8995 8996 8997 8998 8999 9000 9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9011 9012 9013 9014 9015 9016 9017 9018 9019 9020 9021 9022 9023 9024 9025 9026 9027 9028 9029 9030 9031 9032 9033 9034 9035 9036 9037 9038 9039 9040 9041 9042 9043 9044 9045 9046 9047 9048 9049 9050 9051 9052 9053 9054 9055 9056 9057 9058 9059 9060 9061 9062 9063 9064 9065 9066 9067 9068 9069 9070 9071 9072 9073 9074 9075 9076 9077 9078 9079 9080 9081 9082 9083 9084 9085 9086 9087 9088 9089 9090 9091 9092 9093 9094 9095 9096 9097 9098 9099 9100 9101 9102 9103 9104 9105 9106 9107 9108 9109 9110 9111 9112 9113 9114 9115 9116 9117 9118 9119 9120 9121 9122 9123 9124 9125 9126 9127 9128 9129 9130 9131 9132 9133 9134 9135 9136 9137 9138 9139 9140 9141 9142 9143 9144 9145 9146 9147 9148 9149 9150 9151 9152 9153 9154 9155 9156 9157 9158 9159 9160 9161 9162 9163 9164 9165 9166 9167 9168 9169 9170 9171 9172 9173 9174 9175 9176 9177 9178 9179 9180 9181 9182 9183 9184 9185 9186 9187 9188 9189 9190 9191 9192 9193 9194 9195 9196 9197 9198 9199 9200 9201 9202 9203 9204 9205 9206 9207 9208 9209 9210 9211 9212 9213 9214 9215 9216 9217 9218 9219 9220 9221 9222 9223 9224 9225 9226 9227 9228 9229 9230 9231 9232 9233 9234 9235 9236 9237 9238 9239 9240 9241 9242 9243 9244 9245 9246 9247 9248 9249 9250 9251 9252 9253 9254 9255 9256 9257 9258 9259 9260 9261 9262 9263 9264 9265 9266 9267 9268 9269 9270 9271 9272 9273 9274 9275 9276 9277 9278 9279 9280 9281 9282 9283 9284 9285 9286 9287 9288 9289 9290 9291 9292 9293 9294 9295 9296 9297 9298 9299 9300 9301 9302 9303 9304 9305 9306 9307 9308 9309 9310 9311 9312 9313 9314 9315 9316 9317 9318 9319 9320 9321 9322 9323 9324 9325 9326 9327 9328 9329 9330 9331 9332 9333 9334 9335 9336 9337 9338 9339 9340 9341 9342 9343 9344 9345 9346 9347 9348 9349 9350 9351 9352 9353 9354 9355 9356 9357 9358 9359 9360 9361 9362 9363 9364 9365 9366 9367 9368 9369 9370 9371 9372 9373 9374 9375 9376 9377 9378 9379 9380 9381 9382 9383 9384 9385 9386 9387 9388 9389 9390 9391 9392 9393 9394 9395 9396 9397 9398 9399 9400 9401 9402 9403 9404 9405 9406 9407 9408 9409 9410 9411 9412 9413 9414 9415 9416 9417 9418 9419 9420 9421 9422 9423 9424 9425 9426 9427 9428 9429 9430 9431 9432 9433 9434 9435 9436 9437 9438 9439 9440 9441 9442 9443 9444 9445 9446 9447 9448 9449 9450 9451 9452 9453 9454 9455 9456 9457 9458 9459 9460 9461 9462 9463 9464 9465 9466 9467 9468 9469 9470 9471 9472 9473 9474 9475 9476 9477 9478 9479 9480 9481 9482 9483 9484 9485 9486 9487 9488 9489 9490 9491 9492 9493 9494 9495 9496 9497 9498 9499 9500 9501 9502 9503 9504 9505 9506 9507 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9562 9563 9564 9565 9566 9567 9568 9569 9570 9571 9572 9573 9574 9575 9576 9577 9578 9579 9580 9581 9582 9583 9584 9585 9586 9587 9588 9589 9590 9591 9592 9593 9594 9595 9596 9597 9598 9599 9600 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 9670 9671 9672 9673 9674 9675 9676 9677 9678 9679 9680 9681 9682 9683 9684 9685 9686 9687 9688 9689 9690 9691 9692 9693 9694 9695 9696 9697 9698 9699 9700 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9743 9744 9745 9746 9747 9748 9749 9750 9751 9752 9753 9754 9755 9756 9757 9758 9759 9760 9761 9762 9763 9764 9765 9766 9767 9768 9769 9770 9771 9772 9773 9774 9775 9776 9777 9778 9779 9780 9781 9782 9783 9784 9785 9786 9787 9788 9789 9790 9791 9792 9793 9794 9795 9796 9797 9798 9799 9800 9801 9802 9803 9804 9805 9806 9807 9808 9809 9810 9811 9812 9813 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9843 9844 9845 9846 9847 9848 9849 9850 9851 9852 9853 9854 9855 9856 9857 9858 9859 9860 9861 9862 9863 9864 9865 9866 9867 9868 9869 9870 9871 9872 9873 9874 9875 9876 9877 9878 9879 9880 9881 9882 9883 9884 9885 9886 9887 9888 9889 9890 9891 9892 9893 9894 9895 9896 9897 9898 9899 9900 9901 9902 9903 9904 9905 9906 9907 9908 9909 9910 9911 9912 9913 9914 9915 9916 9917 9918 9919 9920 9921 9922 9923 9924 9925 9926 9927 9928 9929 9930 9931 9932 9933 9934 9935 9936 9937 9938 9939 9940 9941 9942 9943 9944 9945 9946 9947 9948 9949 9950 9951 9952 9953 9954 9955 9956 9957 9958 9959 9960 9961 9962 9963 9964 9965 9966 9967 9968 9969 9970 9971 9972 9973 9974 9975 9976 9977 9978 9979 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 9995 9996 9997 9998 9999 10000 10001 10002 10003 10004 10005 10006 10007 10008 10009 10010 10011 10012 10013 10014 10015 10016 10017 10018 10019 10020 10021 10022 10023 10024 10025 10026 10027 10028 10029 10030 10031 10032 10033 10034 10035 10036 10037 10038 10039 10040 10041 10042 10043 10044 10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059 10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074 10075 10076 10077 10078 10079 10080 10081 10082 10083 10084 10085 10086 10087 10088 10089 10090 10091 10092 10093 10094 10095 10096 10097 10098 10099 10100 10101 10102 10103 10104 10105 10106 10107 10108 10109 10110 10111 10112 10113 10114 10115 10116 10117 10118 10119 10120 10121 10122 10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10133 10134 10135 10136 10137 10138 10139 10140 10141 10142 10143 10144 10145 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10157 10158 10159 10160 10161 10162 10163 10164 10165 10166 10167 10168 10169 10170 10171 10172 10173 10174 10175 10176 10177 10178 10179 10180 10181 10182 10183 10184 10185 10186 10187 10188 10189 10190 10191 10192 10193 10194 10195 10196 10197 10198 10199 10200 10201 10202 10203 10204 10205 10206 10207 10208 10209 10210 10211 10212 10213 10214 10215 10216 10217 10218 10219 10220 10221 10222 10223 10224 10225 10226 10227 10228 10229 10230 10231 10232 10233 10234 10235 10236 10237 10238 10239 10240 10241 10242 10243 10244 10245 10246 10247 10248 10249 10250 10251 10252 10253 10254 10255 10256 10257 10258 10259 10260 10261 10262 10263 10264 10265 10266 10267 10268 10269 10270 10271 10272 10273 10274 10275 10276 10277 10278 10279 10280 10281 10282 10283 10284 10285 10286 10287 10288 10289 10290 10291 10292 10293 10294 10295 10296 10297 10298 10299 10300 10301 10302 10303 10304 10305 10306 10307 10308 10309 10310 10311 10312 10313 10314 10315 10316 10317 10318 10319 10320 10321 10322 10323 10324 10325 10326 10327 10328 10329 10330 10331 10332 10333 10334 10335 10336 10337 10338 10339 10340 10341 10342 10343 10344 10345 10346 10347 10348 10349 10350 10351 10352 10353 10354 10355 10356 10357 10358 10359 10360 10361 10362 10363 10364 10365 10366 10367 10368 10369 10370 10371 10372 10373 10374 10375 10376 10377 10378 10379 10380 10381 10382 10383 10384 10385 10386 10387 10388 10389 10390 10391 10392 10393 10394 10395 10396 10397 10398 10399 10400 10401 10402 10403 10404 10405 10406 10407 10408 10409 10410 10411 10412 10413 10414 10415 10416 10417 10418 10419 10420 10421 10422 10423 10424 10425 10426 10427 10428 10429 10430 10431 10432 10433 10434 10435 10436 10437 10438 10439 10440 10441 10442 10443 10444 10445 10446 10447 10448 10449 10450 10451 10452 10453 10454 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548 10549 10550 10551 10552 10553 10554 10555 10556 10557 10558 10559 10560 10561 10562 10563 10564 10565 10566 10567 10568 10569 10570 10571 10572 10573 10574 10575 10576 10577 10578 10579 10580 10581 10582 10583 10584 10585 10586 10587 10588 10589 10590 10591 10592 10593 10594 10595 10596 10597 10598 10599 10600 10601 10602 10603 10604 10605 10606 10607 10608 10609 10610 10611 10612 10613 10614 10615 10616 10617 10618 10619 10620 10621 10622 10623 10624 10625 10626 10627 10628 10629 10630 10631 10632 10633 10634 10635 10636 10637 10638 10639 10640 10641 10642 10643 10644 10645 10646 10647 10648 10649 10650 10651 10652 10653 10654 10655 10656 10657 10658 10659 10660 10661 10662 10663 10664 10665 10666 10667 10668 10669 10670 10671 10672 10673 10674 10675 10676 10677 10678 10679 10680 10681 10682 10683 10684 10685 10686 10687 10688 10689 10690 10691 10692 10693 10694 10695 10696 10697 10698 10699 10700 10701 10702 10703 10704 10705 10706 10707 10708 10709 10710 10711 10712 10713 10714 10715 10716 10717 10718 10719 10720 10721 10722 10723 10724 10725 10726 10727 10728 10729 10730 10731 10732 10733 10734 10735 10736 10737 10738 10739 10740 10741 10742 10743 10744 10745 10746 10747 10748 10749 10750 10751 10752 10753 10754 10755 10756 10757 10758 10759 10760 10761 10762 10763 10764 10765 10766 10767 10768 10769 10770 10771 10772 10773 10774 10775 10776 10777 10778 10779 10780 10781 10782 10783 10784 10785 10786 10787 10788 10789 10790 10791 10792 10793 10794 10795 10796 10797 10798 10799 10800 10801 10802 10803 10804 10805 10806 10807 10808 10809 10810 10811 10812 10813 10814 10815 10816 10817 10818 10819 10820 10821 10822 10823 10824 10825 10826 10827 10828 10829 10830 10831 10832 10833 10834 10835 10836 10837 10838 10839 10840 10841 10842 10843 10844 10845 10846 10847 10848 10849 10850 10851 10852 10853 10854 10855 10856 10857 10858 10859 10860 10861 10862 10863 10864 10865 10866 10867 10868 10869 10870 10871 10872 10873 10874 10875 10876 10877 10878 10879 10880 10881 10882 10883 10884 10885 10886 10887 10888 10889 10890 10891 10892 10893 10894 10895 10896 10897 10898 10899 10900 10901 10902 10903 10904 10905 10906 10907 10908 10909 10910 10911 10912 10913 10914 10915 10916 10917 10918 10919 10920 10921 10922 10923 10924 10925 10926 10927 10928 10929 10930 10931 10932 10933 10934 10935 10936 10937 10938 10939 10940 10941 10942 10943 10944 10945 10946 10947 10948 10949 10950 10951 10952 10953 10954 10955 10956 10957 10958 10959 10960 10961 10962 10963 10964 10965 10966 10967 10968 10969 10970 10971 10972 10973 10974 10975 10976 10977 10978 10979 10980 10981 10982 10983 10984 10985 10986 10987 10988 10989 10990 10991 10992 10993 10994 10995 10996 10997 10998 10999 11000 11001 11002 11003 11004 11005 11006 11007 11008 11009 11010 11011 11012 11013 11014 11015 11016 11017 11018 11019 11020 11021 11022 11023 11024 11025 11026 11027 11028 11029 11030 11031 11032 11033 11034 11035 11036 11037 11038 11039 11040 11041 11042 11043 11044 11045 11046 11047 11048 11049 11050 11051 11052 11053 11054 11055 11056 11057 11058 11059 11060 11061 11062 11063 11064 11065 11066 11067 11068 11069 11070 11071 11072 11073 11074 11075 11076 11077 11078 11079 11080 11081 11082 11083 11084 11085 11086 11087 11088 11089 11090 11091 11092 11093 11094 11095 11096 11097 11098 11099 11100 11101 11102 11103 11104 11105 11106 11107 11108 11109 11110 11111 11112 11113 11114 11115 11116 11117 11118 11119 11120 11121 11122 11123 11124 11125 11126 11127 11128 11129 11130 11131 11132 11133 11134 11135 11136 11137 11138 11139 11140 11141 11142 11143 11144 11145 11146 11147 11148 11149 11150 11151 11152 11153 11154 11155 11156 11157 11158 11159 11160 11161 11162 11163 11164 11165 11166 11167 11168 11169 11170 11171 11172 11173 11174 11175 11176 11177 11178 11179 11180 11181 11182 11183 11184 11185 11186 11187 11188 11189 11190 11191 11192 11193 11194 11195 11196 11197 11198 11199 11200 11201 11202 11203 11204 11205 11206 11207 11208 11209 11210 11211 11212 11213 11214 11215 11216 11217 11218 11219 11220 11221 11222 11223 11224 11225 11226 11227 11228 11229 11230 11231 11232 11233 11234 11235 11236 11237 11238 11239 11240 11241 11242 11243 11244 11245 11246 11247 11248 11249 11250 11251 11252 11253 11254 11255 11256 11257 11258 11259 11260 11261 11262 11263 11264 11265 11266 11267 11268 11269 11270 11271 11272 11273 11274 11275 11276 11277 11278 11279 11280 11281 11282 11283 11284 11285 11286 11287 11288 11289 11290 11291 11292 11293 11294 11295 11296 11297 11298 11299 11300 11301 11302 11303 11304 11305 11306 11307 11308 11309 11310 11311 11312 11313 11314 11315 11316 11317 11318 11319 11320 11321 11322 11323 11324 11325 11326 11327 11328 11329 11330 11331 11332 11333 11334 11335 11336 11337 11338 11339 11340 11341 11342 11343 11344 11345 11346 11347 11348 11349 11350 11351 11352 11353 11354 11355 11356 11357 11358 11359 11360 11361 11362 11363 11364 11365 11366 11367 11368 11369 11370 11371 11372 11373 11374 11375 11376 11377 11378 11379 11380 11381 11382 11383 11384 11385 11386 11387 11388 11389 11390 11391 11392 11393 11394 11395 11396 11397 11398 11399 11400 11401 11402 11403 11404 11405 11406 11407 11408 11409 11410 11411 11412 11413 11414 11415 11416 11417 11418 11419 11420 11421 11422 11423 11424 11425 11426 11427 11428 11429 11430 11431 11432 11433 11434 11435 11436 11437 11438 11439 11440 11441 11442 11443 11444 11445 11446 11447 11448 11449 11450 11451 11452 11453 11454 11455 11456 11457 11458 11459 11460 11461 11462 11463 11464 11465 11466 11467 11468 11469 11470 11471 11472 11473 11474 11475 11476 11477 11478 11479 11480 11481 11482 11483 11484 11485 11486 11487 11488 11489 11490 11491 11492 11493 11494 11495 11496 11497 11498 11499 11500 11501 11502 11503 11504 11505 11506 11507 11508 11509 11510 11511 11512 11513 11514 11515 11516 11517 11518 11519 11520 11521 11522 11523 11524 11525 11526 11527 11528 11529 11530 11531 11532 11533 11534 11535 11536 11537 11538 11539 11540 11541 11542 11543 11544 11545 11546 11547 11548 11549 11550 11551 11552 11553 11554 11555 11556 11557 11558 11559 11560 11561 11562 11563 11564 11565 11566 11567 11568 11569 11570 11571 11572 11573 11574 11575 11576 11577 11578 11579 11580 11581 11582 11583 11584 11585 11586 11587 11588 11589 11590 11591 11592 11593 11594 11595 11596 11597 11598 11599 11600 11601 11602 11603 11604 11605 11606 11607 11608 11609 11610 11611 11612 11613 11614 11615 11616 11617 11618 11619 11620 11621 11622 11623 11624 11625 11626 11627 11628 11629 11630 11631 11632 11633 11634 11635 11636 11637 11638 11639 11640 11641 11642 11643 11644 11645 11646 11647 11648 11649 11650 11651 11652 11653 11654 11655 11656 11657 11658 11659 11660 11661 11662 11663 11664 11665 11666 11667 11668 11669 11670 11671 11672 11673 11674 11675 11676 11677 11678 11679 11680 11681 11682 11683 11684 11685 11686 11687 11688 11689 11690 11691 11692 11693 11694 11695 11696 11697 11698 11699 11700 11701 11702 11703 11704 11705 11706 11707 11708 11709 11710 11711 11712 11713 11714 11715 11716 11717 11718 11719 11720 11721 11722 11723 11724 11725 11726 11727 11728 11729 11730 11731 11732 11733 11734 11735 11736 11737 11738 11739 11740 11741 11742 11743 11744 11745 11746 11747 11748 11749 11750 11751 11752 11753 11754 11755 11756 11757 11758 11759 11760 11761 11762 11763 11764 11765 11766 11767 11768 11769 11770 11771 11772 11773 11774 11775 11776 11777 11778 11779 11780 11781 11782 11783 11784 11785 11786 11787 11788 11789 11790 11791 11792 11793 11794 11795 11796 11797 11798 11799 11800 11801 11802 11803 11804 11805 11806 11807 11808 11809 11810 11811 11812 11813 11814 11815 11816 11817 11818 11819 11820 11821 11822 11823 11824 11825 11826 11827 11828 11829 11830 11831 11832 11833 11834 11835 11836 11837 11838 11839 11840 11841 11842 11843 11844 11845 11846 11847 11848 11849 11850 11851 11852 11853 11854 11855 11856 11857 11858 11859 11860 11861 11862 11863 11864 11865 11866 11867 11868 11869 11870 11871 11872 11873 11874 11875 11876 11877 11878 11879 11880 11881 11882 11883 11884 11885 11886 11887 11888 11889 11890 11891 11892 11893 11894 11895 11896 11897 11898 11899 11900 11901 11902 11903 11904 11905 11906 11907 11908 11909 11910 11911 11912 11913 11914 11915 11916 11917 11918 11919 11920 11921 11922 11923 11924 11925 11926 11927 11928 11929 11930 11931 11932 11933 11934 11935 11936 11937 11938 11939 11940 11941 11942 11943 11944 11945 11946 11947 11948 11949 11950 11951 11952 11953 11954 11955 11956 11957 11958 11959 11960 11961 11962 11963 11964 11965 11966 11967 11968 11969 11970 11971 11972 11973 11974 11975 11976 11977 11978 11979 11980 11981 11982 11983 11984 11985 11986 11987 11988 11989 11990 11991 11992 11993 11994 11995 11996 11997 11998 11999 12000 12001 12002 12003 12004 12005 12006 12007 12008 12009 12010 12011 12012 12013 12014 12015 12016 12017 12018 12019 12020 12021 12022 12023 12024 12025 12026 12027 12028 12029 12030 12031 12032 12033 12034 12035 12036 12037 12038 12039 12040 12041 12042 12043 12044 12045 12046 12047 12048 12049 12050 12051 12052 12053 12054 12055 12056 12057 12058 12059 12060 12061 12062 12063 12064 12065 12066 12067 12068 12069 12070 12071 12072 12073 12074 12075 12076 12077 12078 12079 12080 12081 12082 12083 12084 12085 12086 12087 12088 12089 12090 12091 12092 12093 12094 12095 12096 12097 12098 12099 12100 12101 12102 12103 12104 12105 12106 12107 12108 12109 12110 12111 12112 12113 12114 12115 12116 12117 12118 12119 12120 12121 12122 12123 12124 12125 12126 12127 12128 12129 12130 12131 12132 12133 12134 12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146 12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182 12183 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203 12204 12205 12206 12207 12208 12209 12210 12211 12212 12213 12214 12215 12216 12217 12218 12219 12220 12221 12222 12223 12224 12225 12226 12227 12228 12229 12230 12231 12232 12233 12234 12235 12236 12237 12238 12239 12240 12241 12242 12243 12244 12245 12246 12247 12248 12249 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 12260 12261 12262 12263 12264 12265 12266 12267 12268 12269 12270 12271 12272 12273 12274 12275 12276 12277 12278 12279 12280 12281 12282 12283 12284 12285 12286 12287 12288 12289 12290 12291 12292 12293 12294 12295 12296 12297 12298 12299 12300 12301 12302 12303 12304 12305 12306 12307 12308 12309 12310 12311 12312 12313 12314 12315 12316 12317 12318 12319 12320 12321 12322 12323 12324 12325 12326 12327 12328 12329 12330 12331 12332 12333 12334 12335 12336 12337 12338 12339 12340 12341 12342 12343 12344 12345 12346 12347 12348 12349 12350 12351 12352 12353 12354 12355 12356 12357 12358 12359 12360 12361 12362 12363 12364 12365 12366 12367 12368 12369 12370 12371 12372 12373 12374 12375 12376 12377 12378 12379 12380 12381 12382 12383 12384 12385 12386 12387 12388 12389 12390 12391 12392 12393 12394 12395 12396 12397 12398 12399 12400 12401 12402 12403 12404 12405 12406 12407 12408 12409 12410 12411 12412 12413 12414 12415 12416 12417 12418 12419 12420 12421 12422 12423 12424 12425 12426 12427 12428 12429 12430 12431 12432 12433 12434 12435 12436 12437 12438 12439 12440 12441 12442 12443 12444 12445 12446 12447 12448 12449 12450 12451 12452 12453 12454 12455 12456 12457 12458 12459 12460 12461 12462 12463 12464 12465 12466 12467 12468 12469 12470 12471 12472 12473 12474 12475 12476 12477 12478 12479 12480 12481 12482 12483 12484 12485 12486 12487 12488 12489 12490 12491 12492 12493 12494 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513 12514 12515 12516 12517 12518 12519 12520 12521 12522 12523 12524 12525 12526 12527 12528 12529 12530 12531 12532 12533 12534 12535 12536 12537 12538 12539 12540 12541 12542 12543 12544 12545 12546 12547 12548 12549 12550 12551 12552 12553 12554 12555 12556 12557 12558 12559 12560 12561 12562 12563 12564 12565 12566 12567 12568 12569 12570 12571 12572 12573 12574 12575 12576 12577 12578 12579 12580 12581 12582 12583 12584 12585 12586 12587 12588 12589 12590 12591 12592 12593 12594 12595 12596 12597 12598 12599 12600 12601 12602 12603 12604 12605 12606 12607 12608 12609 12610 12611 12612 12613 12614 12615 12616 12617 12618 12619 12620 12621 12622 12623 12624 12625 12626 12627 12628 12629 12630 12631 12632 12633 12634 12635 12636 12637 12638 12639 12640 12641 12642 12643 12644 12645 12646 12647 12648 12649 12650 12651 12652 12653 12654 12655 12656 12657 12658 12659 12660 12661 12662 12663 12664 12665 12666 12667 12668 12669 12670 12671 12672 12673 12674 12675 12676 12677 12678 12679 12680 12681 12682 12683 12684 12685 12686 12687 12688 12689 12690 12691 12692 12693 12694 12695 12696 12697 12698 12699 12700 12701 12702 12703 12704 12705 12706 12707 12708 12709 12710 12711 12712 12713 12714 12715 12716 12717 12718 12719 12720 12721 12722 12723 12724 12725 12726 12727 12728 12729 12730 12731 12732 12733 12734 12735 12736 12737 12738 12739 12740 12741 12742 12743 12744 12745 12746 12747 12748 12749 12750 12751 12752 12753 12754 12755 12756 12757 12758 12759 12760 12761 12762 12763 12764 12765 12766 12767 12768 12769 12770 12771 12772 12773 12774 12775 12776 12777 12778 12779 12780 12781 12782 12783 12784 12785 12786 12787 12788 12789 12790 12791 12792 12793 12794 12795 12796 12797 12798 12799 12800 12801 12802 12803 12804 12805 12806 12807 12808 12809 12810 12811 12812 12813 12814 12815 12816 12817 12818 12819 12820 12821 12822 12823 12824 12825 12826 12827 12828 12829 12830 12831 12832 12833 12834 12835 12836 12837 12838 12839 12840 12841 12842 12843 12844 12845 12846 12847 12848 12849 12850 12851 12852 12853 12854 12855 12856 12857 12858 12859 12860 12861 12862 12863 12864 12865 12866 12867 12868 12869 12870 12871 12872 12873 12874 12875 12876 12877 12878 12879 12880 12881 12882 12883 12884 12885 12886 12887 12888 12889 12890 12891 12892 12893 12894 12895 12896 12897 12898 12899 12900 12901 12902 12903 12904 12905 12906 12907 12908 12909 12910 12911 12912 12913 12914 12915 12916 12917 12918 12919 12920 12921 12922 12923 12924 12925 12926 12927 12928 12929 12930 12931 12932 12933 12934 12935 12936 12937 12938 12939 12940 12941 12942 12943 12944 12945 12946 12947 12948 12949 12950 12951 12952 12953 12954 12955 12956 12957 12958 12959 12960 12961 12962 12963 12964 12965 12966 12967 12968 12969 12970 12971 12972 12973 12974 12975 12976 12977 12978 12979 12980 12981 12982 12983 12984 12985 12986 12987 12988 12989 12990 12991 12992 12993 12994 12995 12996 12997 12998 12999 13000 13001 13002 13003 13004 13005 13006 13007 13008 13009 13010 13011 13012 13013 13014 13015 13016 13017 13018 13019 13020 13021 13022 13023 13024 13025 13026 13027 13028 13029 13030 13031 13032 13033 13034 13035 13036 13037 13038 13039 13040 13041 13042 13043 13044 13045 13046 13047 13048 13049 13050 13051 13052 13053 13054 13055 13056 13057 13058 13059 13060 13061 13062 13063 13064 13065 13066 13067 13068 13069 13070 13071 13072 13073 13074 13075 13076 13077 13078 13079 13080 13081 13082 13083 13084 13085 13086 13087 13088 13089 13090 13091 13092 13093 13094 13095 13096 13097 13098 13099 13100 13101 13102 13103 13104 13105 13106 13107 13108 13109 13110 13111 13112 13113 13114 13115 13116 13117 13118 13119 13120 13121 13122 13123 13124 13125 13126 13127 13128 13129 13130 13131 13132 13133 13134 13135 13136 13137 13138 13139 13140 13141 13142 13143 13144 13145 13146 13147 13148 13149 13150 13151 13152 13153 13154 13155 13156 13157 13158 13159 13160 13161 13162 13163 13164 13165 13166 13167 13168 13169 13170 13171 13172 13173 13174 13175 13176 13177 13178 13179 13180 13181 13182 13183 13184 13185 13186 13187 13188 13189 13190 13191 13192 13193 13194 13195 13196 13197 13198 13199 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 13210 13211 13212 13213 13214 13215 13216 13217 13218 13219 13220 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238 13239 13240 13241 13242 13243 13244 13245 13246 13247 13248 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264 13265 13266 13267 13268 13269 13270 13271 13272 13273 13274 13275 13276 13277 13278 13279 13280 13281 13282 13283 13284 13285 13286 13287 13288 13289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13391 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619 13620 13621 13622 13623 13624 13625 13626 13627 13628 13629 13630 13631 13632 13633 13634 13635 13636 13637 13638 13639 13640 13641 13642 13643 13644 13645 13646 13647 13648 13649 13650 13651 13652 13653 13654 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677 13678 13679 13680 13681 13682 13683 13684 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696 13697 13698 13699 13700 13701 13702 13703 13704 13705 13706 13707 13708 13709 13710 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784 13785 13786 13787 13788 13789 13790 13791 13792 13793 13794 13795 13796 13797 13798 13799 13800 13801 13802 13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13821 13822 13823 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878 13879 13880 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13892 13893 13894 13895 13896 13897 13898 13899 13900 13901 13902 13903 13904 13905 13906 13907 13908 13909 13910 13911 13912 13913 13914 13915 13916 13917 13918 13919 13920 13921 13922 13923 13924 13925 13926 13927 13928 13929 13930 13931 13932 13933 13934 13935 13936 13937 13938 13939 13940 13941 13942 13943 13944 13945 13946 13947 13948 13949 13950 13951 13952 13953 13954 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13983 13984 13985 13986 13987 13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13998 13999 14000 14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025 14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101 14102 14103 14104 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114 14115 14116 14117 14118 14119 14120 14121 14122 14123 14124 14125 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 14150 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222 14223 14224 14225 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273 14274 14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 14316 14317 14318 14319 14320 14321 14322 14323 14324 14325 14326 14327 14328 14329 14330 14331 14332 14333 14334 14335 14336 14337 14338 14339 14340 14341 14342 14343 14344 14345 14346 14347 14348 14349 14350 14351 14352 14353 14354 14355 14356 14357 14358 14359 14360 14361 14362 14363 14364 14365 14366 14367 14368 14369 14370 14371 14372 14373 14374 14375 14376 14377 14378 14379 14380 14381 14382 14383 14384 14385 14386 14387 14388 14389 14390 14391 14392 14393 14394 14395 14396 14397 14398 14399 14400 14401 14402 14403 14404 14405 14406 14407 14408 14409 14410 14411 14412 14413 14414 14415 14416 14417 14418 14419 14420 14421 14422 14423 14424 14425 14426 14427 14428 14429 14430 14431 14432 14433 14434 14435 14436 14437 14438 14439 14440 14441 14442 14443 14444 14445 14446 14447 14448 14449 14450 14451 14452 14453 14454 14455 14456 14457 14458 14459 14460 14461 14462 14463 14464 14465 14466 14467 14468 14469 14470 14471 14472 14473 14474 14475 14476 14477 14478 14479 14480 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592 14593 14594 14595 14596 14597 14598 14599 14600 14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14623 14624 14625 14626 14627 14628 14629 14630 14631 14632 14633 14634 14635 14636 14637 14638 14639 14640 14641 14642 14643 14644 14645 14646 14647 14648 14649 14650 14651 14652 14653 14654 14655 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681 14682 14683 14684 14685 14686 14687 14688 14689 14690 14691 14692 14693 14694 14695 14696 14697 14698 14699 14700 14701 14702 14703 14704 14705 14706 14707 14708 14709 14710 14711 14712 14713 14714 14715 14716 14717 14718 14719 14720 14721 14722 14723 14724 14725 14726 14727 14728 14729 14730 14731 14732 14733 14734 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746 14747 14748 14749 14750 14751 14752 14753 14754 14755 14756 14757 14758 14759 14760 14761 14762 14763 14764 14765 14766 14767 14768 14769 14770 14771 14772 14773 14774 14775 14776 14777 14778 14779 14780 14781 14782 14783 14784 14785 14786 14787 14788 14789 14790 14791 14792 14793 14794 14795 14796 14797 14798 14799 14800 14801 14802 14803 14804 14805 14806 14807 14808 14809 14810 14811 14812 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14823 14824 14825 14826 14827 14828 14829 14830 14831 14832 14833 14834 14835 14836 14837 14838 14839 14840 14841 14842 14843 14844 14845 14846 14847 14848 14849 14850 14851 14852 14853 14854 14855 14856 14857 14858 14859 14860 14861 14862 14863 14864 14865 14866 14867 14868 14869 14870 14871 14872 14873 14874 14875 14876 14877 14878 14879 14880 14881 14882 14883 14884 14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902 14903 14904 14905 14906 14907 14908 14909 14910 14911 14912 14913 14914 14915 14916 14917 14918 14919 14920 14921 14922 14923 14924 14925 14926 14927 14928 14929 14930 14931 14932 14933 14934 14935 14936 14937 14938 14939 14940 14941 14942 14943 14944 14945 14946 14947 14948 14949 14950 14951 14952 14953 14954 14955 14956 14957 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973 14974 14975 14976 14977 14978 14979 14980 14981 14982 14983 14984 14985 14986 14987 14988 14989 14990 14991 14992 14993 14994 14995 14996 14997 14998 14999 15000 15001 15002 15003 15004 15005 15006 15007 15008 15009 15010 15011 15012 15013 15014 15015 15016 15017 15018 15019 15020 15021 15022 15023 15024 15025 15026 15027 15028 15029 15030 15031 15032 15033 15034 15035 15036 15037 15038 15039 15040 15041 15042 15043 15044 15045 15046 15047 15048 15049 15050 15051 15052 15053 15054 15055 15056 15057 15058 15059 15060 15061 15062 15063 15064 15065 15066 15067 15068 15069 15070 15071 15072 15073 15074 15075 15076 15077 15078 15079 15080 15081 15082 15083 15084 15085 15086 15087 15088 15089 15090 15091 15092 15093 15094 15095 15096 15097 15098 15099 15100 15101 15102 15103 15104 15105 15106 15107 15108 15109 15110 15111 15112 15113 15114 15115 15116 15117 15118 15119 15120 15121 15122 15123 15124 15125 15126 15127 15128 15129 15130 15131 15132 15133 15134 15135 15136 15137 15138 15139 15140 15141 15142 15143 15144 15145 15146 15147 15148 15149 15150 15151 15152 15153 15154 15155 15156 15157 15158 15159 15160 15161 15162 15163 15164 15165 15166 15167 15168 15169 15170 15171 15172 15173 15174 15175 15176 15177 15178 15179 15180 15181 15182 15183 15184 15185 15186 15187 15188 15189 15190 15191 15192 15193 15194 15195 15196 15197 15198 15199 15200 15201 15202 15203 15204 15205 15206 15207 15208 15209 15210 15211 15212 15213 15214 15215 15216 15217 15218 15219 15220 15221 15222 15223 15224 15225 15226 15227 15228 15229 15230 15231 15232 15233 15234 15235 15236 15237 15238 15239 15240 15241 15242 15243 15244 15245 15246 15247 15248 15249 15250 15251 15252 15253 15254 15255 15256 15257 15258 15259 15260 15261 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 15284 15285 15286 15287 15288 15289 15290 15291 15292 15293 15294 15295 15296 15297 15298 15299 15300 15301 15302 15303 15304 15305 15306 15307 15308 15309 15310 15311 15312 15313 15314 15315 15316 15317 15318 15319 15320 15321 15322 15323 15324 15325 15326 15327 15328 15329 15330 15331 15332 15333 15334 15335 15336 15337 15338 15339 15340 15341 15342 15343 15344 15345 15346 15347 15348 15349 15350 15351 15352 15353 15354 15355 15356 15357 15358 15359 15360 15361 15362 15363 15364 15365 15366 15367 15368 15369 15370 15371 15372 15373 15374 15375 15376 15377 15378 15379 15380 15381 15382 15383 15384 15385 15386 15387 15388 15389 15390 15391 15392 15393 15394 15395 15396 15397 15398 15399 15400 15401 15402 15403 15404 15405 15406 15407 15408 15409 15410 15411 15412 15413 15414 15415 15416 15417 15418 15419 15420 15421 15422 15423 15424 15425 15426 15427 15428 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 15440 15441 15442 15443 15444 15445 15446 15447 15448 15449 15450 15451 15452 15453 15454 15455 15456 15457 15458 15459 15460 15461 15462 15463 15464 15465 15466 15467 15468 15469 15470 15471 15472 15473 15474 15475 15476 15477 15478 15479 15480 15481 15482 15483 15484 15485 15486 15487 15488 15489 15490 15491 15492 15493 15494 15495 15496 15497 15498 15499 15500 15501 15502 15503 15504 15505 15506 15507 15508 15509 15510 15511 15512 15513 15514 15515 15516 15517 15518 15519 15520 15521 15522 15523 15524 15525 15526 15527 15528 15529 15530 15531 15532 15533 15534 15535 15536 15537 15538 15539 15540 15541 15542 15543 15544 15545 15546 15547 15548 15549 15550 15551 15552 15553 15554 15555 15556 15557 15558 15559 15560 15561 15562 15563 15564 15565 15566 15567 15568 15569 15570 15571 15572 15573 15574 15575 15576 15577 15578 15579 15580 15581 15582 15583 15584 15585 15586 15587 15588 15589 15590 15591 15592 15593 15594 15595 15596 15597 15598 15599 15600 15601 15602 15603 15604 15605 15606 15607 15608 15609 15610 15611 15612 15613 15614 15615 15616 15617 15618 15619 15620 15621 15622 15623 15624 15625 15626 15627 15628 15629 15630 15631 15632 15633 15634 15635 15636 15637 15638 15639 15640 15641 15642 15643 15644 15645 15646 15647 15648 15649 15650 15651 15652 15653 15654 15655 15656 15657 15658 15659 15660 15661 15662 15663 15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15684 15685 15686 15687 15688 15689 15690 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703 15704 15705 15706 15707 15708 15709 15710 15711 15712 15713 15714 15715 15716 15717 15718 15719 15720 15721 15722 15723 15724 15725 15726 15727 15728 15729 15730 15731 15732 15733 15734 15735 15736 15737 15738 15739 15740 15741 15742 15743 15744 15745 15746 15747 15748 15749 15750 15751 15752 15753 15754 15755 15756 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773 15774 15775 15776 15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796 15797 15798 15799 15800 15801 15802 15803 15804 15805 15806 15807 15808 15809 15810 15811 15812 15813 15814 15815 15816 15817 15818 15819 15820 15821 15822 15823 15824 15825 15826 15827 15828 15829 15830 15831 15832 15833 15834 15835 15836 15837 15838 15839 15840 15841 15842 15843 15844 15845 15846 15847 15848 15849 15850 15851 15852 15853 15854 15855 15856 15857 15858 15859 15860 15861 15862 15863 15864 15865 15866 15867 15868 15869 15870 15871 15872 15873 15874 15875 15876 15877 15878 15879 15880 15881 15882 15883 15884 15885 15886 15887 15888 15889 15890 15891 15892 15893 15894 15895 15896 15897 15898 15899 15900 15901 15902 15903 15904 15905 15906 15907 15908 15909 15910 15911 15912 15913 15914 15915 15916 15917 15918 15919 15920 15921 15922 15923 15924 15925 15926 15927 15928 15929 15930 15931 15932 15933 15934 15935 15936 15937 15938 15939 15940 15941 15942 15943 15944 15945 15946 15947 15948 15949 15950 15951 15952 15953 15954 15955 15956 15957 15958 15959 15960 15961 15962 15963 15964 15965 15966 15967 15968 15969 15970 15971 15972 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984 15985 15986 15987 15988 15989 15990 15991 15992 15993 15994 15995 15996 15997 15998 15999 16000 16001 16002 16003 16004 16005 16006 16007 16008 16009 16010 16011 16012 16013 16014 16015 16016 16017 16018 16019 16020 16021 16022 16023 16024 16025 16026 16027 16028 16029 16030 16031 16032 16033 16034 16035 16036 16037 16038 16039 16040 16041 16042 16043 16044 16045 16046 16047 16048 16049 16050 16051 16052 16053 16054 16055 16056 16057 16058 16059 16060 16061 16062 16063 16064 16065 16066 16067 16068 16069 16070 16071 16072 16073 16074 16075 16076 16077 16078 16079 16080 16081 16082 16083 16084 16085 16086 16087 16088 16089 16090 16091 16092 16093 16094 16095 16096 16097 16098 16099 16100 16101 16102 16103 16104 16105 16106 16107 16108 16109 16110 16111 16112 16113 16114 16115 16116 16117 16118 16119 16120 16121 16122 16123 16124 16125 16126 16127 16128 16129 16130 16131 16132 16133 16134 16135 16136 16137 16138 16139 16140 16141 16142 16143 16144 16145 16146 16147 16148 16149 16150 16151 16152 16153 16154 16155 16156 16157 16158 16159 16160 16161 16162 16163 16164 16165 16166 16167 16168 16169 16170 16171 16172 16173 16174 16175 16176 16177 16178 16179 16180 16181 16182 16183 16184 16185 16186 16187 16188 16189 16190 16191 16192 16193 16194 16195 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 16220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16237 16238 16239 16240 16241 16242 16243 16244 16245 16246 16247 16248 16249 16250 16251 16252 16253 16254 16255 16256 16257 16258 16259 16260 16261 16262 16263 16264 16265 16266 16267 16268 16269 16270 16271 16272 16273 16274 16275 16276 16277 16278 16279 16280 16281 16282 16283 16284 16285 16286 16287 16288 16289 16290 16291 16292 16293 16294 16295 16296 16297 16298 16299 16300 16301 16302 16303 16304 16305 16306 16307 16308 16309 16310 16311 16312 16313 16314 16315 16316 16317 16318 16319 16320 16321 16322 16323 16324 16325 16326 16327 16328 16329 16330 16331 16332 16333 16334 16335 16336 16337 16338 16339 16340 16341 16342 16343 16344 16345 16346 16347 16348 16349 16350 16351 16352 16353 16354 16355 16356 16357 16358 16359 16360 16361 16362 16363 16364 16365 16366 16367 16368 16369 16370 16371 16372 16373 16374 16375 16376 16377 16378 16379 16380 16381 16382 16383 16384 16385 16386 16387 16388 16389 16390 16391 16392 16393 16394 16395 16396 16397 16398 16399 16400 16401 16402 16403 16404 16405 16406 16407 16408 16409 16410 16411 16412 16413 16414 16415 16416 16417 16418 16419 16420 16421 16422 16423 16424 16425 16426 16427 16428 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 16440 16441 16442 16443 16444 16445 16446 16447 16448 16449 16450 16451 16452 16453 16454 16455 16456 16457 16458 16459 16460 16461 16462 16463 16464 16465 16466 16467 16468 16469 16470 16471 16472 16473 16474 16475 16476 16477 16478 16479 16480 16481 16482 16483 16484 16485 16486 16487 16488 16489 16490 16491 16492 16493 16494 16495 16496 16497 16498 16499 16500 16501 16502 16503 16504 16505 16506 16507 16508 16509 16510 16511 16512 16513 16514 16515 16516 16517 16518 16519 16520 16521 16522 16523 16524 16525 16526 16527 16528 16529 16530 16531 16532 16533 16534 16535 16536 16537 16538 16539 16540 16541 16542 16543 16544 16545 16546 16547 16548 16549 16550 16551 16552 16553 16554 16555 16556 16557 16558 16559 16560 16561 16562 16563 16564 16565 16566 16567 16568 16569 16570 16571 16572 16573 16574 16575 16576 16577 16578 16579 16580 16581 16582 16583 16584 16585 16586 16587 16588 16589 16590 16591 16592 16593 16594 16595 16596 16597 16598 16599 16600 16601 16602 16603 16604 16605 16606 16607 16608 16609 16610 16611 16612 16613 16614 16615 16616 16617 16618 16619 16620 16621 16622 16623 16624 16625 16626 16627 16628 16629 16630 16631 16632 16633 16634 16635 16636 16637 16638 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380 20381 20382 20383 20384 20385 20386 20387 20388 20389 20390 20391 20392 20393 20394 20395 20396 20397 20398 20399 20400 20401 20402 20403 20404 20405 20406 20407 20408 20409 20410 20411 20412 20413 20414 20415 20416 20417 20418 20419 20420 20421 20422 20423 20424 20425 20426 20427 20428 20429 20430 20431 20432 20433 20434 20435 20436 20437 20438 20439 20440 20441 20442 20443 20444 20445 20446 20447 20448 20449 20450 20451 20452 20453 20454 20455 20456 20457 20458 20459 20460 20461 20462 20463 20464 20465 20466 20467 20468 20469 20470 20471 20472 20473 20474 20475 20476 20477 20478 20479 20480 20481 20482 20483 20484 20485 20486 20487 20488 20489 20490 20491 20492 20493 20494 20495 20496 20497 20498 20499 20500 20501 20502 20503 20504 20505 20506 20507 20508 20509 20510 20511 20512 20513 20514 20515 20516 20517 20518 20519 20520 20521 20522 20523 20524 20525 20526 20527 20528 20529 20530 20531 20532 20533 20534 20535 20536 20537 20538 20539 20540 20541 20542 20543 20544 20545 20546 20547 20548 20549 20550 20551 20552 20553 20554 20555 20556 20557 20558 20559 20560 20561 20562 20563 20564 20565 20566 20567 20568 20569 20570 20571 20572 20573 20574 20575 20576 20577 20578 20579 20580 20581 20582 20583 20584 20585 20586 20587 20588 20589 20590 20591 20592 20593 20594 20595 20596 20597 20598 20599 20600 20601 20602 20603 20604 20605 20606 20607 20608 20609 20610 20611 20612 20613 20614 20615 20616 20617 20618 20619 20620 20621 20622 20623 20624 20625 20626 20627 20628 20629 20630 20631 20632 20633 20634 20635 20636 20637 20638 20639 20640 20641 20642 20643 20644 20645 20646 20647 20648 20649 20650 20651 20652 20653 20654 20655 20656 20657 20658 20659 20660 20661 20662 20663 20664 20665 20666 20667 20668 20669 20670 20671 20672 20673 20674 20675 20676 20677 20678 20679 20680 20681 20682 20683 20684 20685 20686 20687 20688 20689 20690 20691 20692 20693 20694 20695 20696 20697 20698 20699 20700 20701 20702 20703 20704 20705 20706 20707 20708 20709 20710 20711 20712 20713 20714 20715 20716 20717 20718 20719 20720 20721 20722 20723 20724 20725 20726 20727 20728 20729 20730 20731 20732 20733 20734 20735 20736 20737 20738 20739 20740 20741 20742 20743 20744 20745 20746 20747 20748 20749 20750 20751 20752 20753 20754 20755 20756 20757 20758 20759 20760 20761 20762 20763 20764 20765 20766 20767 20768 20769 20770 20771 20772 20773 20774 20775 20776 20777 20778 20779 20780 20781 20782 20783 20784 20785 20786 20787 20788 20789 20790 20791 20792 20793 20794 20795 20796 20797 20798 20799 20800 20801 20802 20803 20804 20805 20806 20807 20808 20809 20810 20811 20812 20813 20814 20815 20816 20817 20818 20819 20820 20821 20822 20823 20824 20825 20826 20827 20828 20829 20830 20831 20832 20833 20834 20835 20836 20837 20838 20839 20840 20841 20842 20843 20844 20845 20846 20847 20848 20849 20850 20851 20852 20853 20854 20855 20856 20857 20858 20859 20860 20861 20862 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877 20878 20879 20880 20881 20882 20883 20884 20885 20886 20887 20888 20889 20890 20891 20892 20893 20894 20895 20896 20897 20898 20899 20900 20901 20902 20903 20904 20905 20906 20907 20908 20909 20910 20911 20912 20913 20914 20915 20916 20917 20918 20919 20920 20921 20922 20923 20924 20925 20926 20927 20928 20929 20930 20931 20932 20933 20934 20935 20936 20937 20938 20939 20940 20941 20942 20943 20944 20945 20946 20947 20948 20949 20950 20951 20952 20953 20954 20955 20956 20957 20958 20959 20960 20961 20962 20963 20964 20965 20966 20967 20968 20969 20970 20971 20972 20973 20974 20975 20976 20977 20978 20979 20980 20981 20982 20983 20984 20985 20986 20987 20988 20989 20990 20991 20992 20993 20994 20995 20996 20997 20998 20999 21000 21001 21002 21003 21004 21005 21006 21007 21008 21009 21010 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21032 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21043 21044 21045 21046 21047 21048 21049 21050 21051 21052 21053 21054 21055 21056 21057 21058 21059 21060 21061 21062 21063 21064 21065 21066 21067 21068 21069 21070 21071 21072 21073 21074 21075 21076 21077 21078 21079 21080 21081 21082 21083 21084 21085 21086 21087 21088 21089 21090 21091 21092 21093 21094 21095 21096 21097 21098 21099 21100 21101 21102 21103 21104 21105 21106 21107 21108 21109 21110 21111 21112 21113 21114 21115 21116 21117 21118 21119 21120 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 21131 21132 21133 21134 21135 21136 21137 21138 21139 21140 21141 21142 21143 21144 21145 21146 21147 21148 21149 21150 21151 21152 21153 21154 21155 21156 21157 21158 21159 21160 21161 21162 21163 21164 21165 21166 21167 21168 21169 21170 21171 21172 21173 21174 21175 21176 21177 21178 21179 21180 21181 21182 21183 21184 21185 21186 21187 21188 21189 21190 21191 21192 21193 21194 21195 21196 21197 21198 21199 21200 21201 21202 21203 21204 21205 21206 21207 21208 21209 21210 21211 21212 21213 21214 21215 21216 21217 21218 21219 21220 21221 21222 21223 21224 21225 21226 21227 21228 21229 21230 21231 21232 21233 21234 21235 21236 21237 21238 21239 21240 21241 21242 21243 21244 21245 21246 21247 21248 21249 21250 21251 21252 21253 21254 21255 21256 21257 21258 21259 21260 21261 21262 21263 21264 21265 21266 21267 21268 21269 21270 21271 21272 21273 21274 21275 21276 21277 21278 21279 21280 21281 21282 21283 21284 21285 21286 21287 21288 21289 21290 21291 21292 21293 21294 21295 21296 21297 21298 21299 21300 21301 21302 21303 21304 21305 21306 21307 21308 21309 21310 21311 21312 21313 21314 21315 21316 21317 21318 21319 21320 21321 21322 21323 21324 21325 21326 21327 21328 21329 21330 21331 21332 21333 21334 21335 21336 21337 21338 21339 21340 21341 21342 21343 21344 21345 21346 21347 21348 21349 21350 21351 21352 21353 21354 21355 21356 21357 21358 21359 21360 21361 21362 21363 21364 21365 21366 21367 21368 21369 21370 21371 21372 21373 21374 21375 21376 21377 21378 21379 21380 21381 21382 21383 21384 21385 21386 21387 21388 21389 21390 21391 21392 21393 21394 21395 21396 21397 21398 21399 21400 21401 21402 21403 21404 21405 21406 21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417 21418 21419 21420 21421 21422 21423 21424 21425 21426 21427 21428 21429 21430 21431 21432 21433 21434 21435 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21449 21450 21451 21452 21453 
# translation of DrakX.po to Icelandic
# translation of DrakX-is_n.po to Icelandic
# translation of DrakX-is.po to Icelandic
# Translation file for Mandrake graphic install, DrakX
# Copyright (C) 1999,2003 Free Software Foundation, Inc.
# Copyright (C) 1999 Mandrakesoft
# Jóhann Þorvarðarson <johann.torvardarson@lais.is>, 1999-2000
# Þórarinn (Tony) R. Einarsson <thori@mindspring.com>, 1999-2000
# Pjetur G. Hjaltason <pjetur@pjetur.net>, 2003
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2004-02-19 18:02+0100\n"
"PO-Revision-Date: 2003-09-18 10:44GMT\n"
"Last-Translator: Pjetur G. Hjaltason <pjetur@pjetur.net>\n"
"Language-Team: Icelandic <kde-isl@molar.is>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.0.1\n"

#: ../move/move.pm:359
#, c-format
msgid ""
"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:369
#, c-format
msgid ""
"We didn't detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:380
#, c-format
msgid "Need a key to save your data"
msgstr ""

#: ../move/move.pm:382
#, c-format
msgid "Detect USB key again"
msgstr ""

#: ../move/move.pm:383 ../move/move.pm:413
#, c-format
msgid "Continue without USB key"
msgstr ""

#: ../move/move.pm:394 ../move/move.pm:408
#, fuzzy, c-format
msgid "Key isn't writable"
msgstr "XawTV er ekki sett upp!"

#: ../move/move.pm:396
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can't safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""

#: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1310
#, c-format
msgid "Reboot"
msgstr "Endurræsa"

#: ../move/move.pm:410
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""

#: ../move/move.pm:412
#, fuzzy, c-format
msgid "Retry"
msgstr "Endurheimta"

#: ../move/move.pm:423
#, c-format
msgid "Setting up USB key"
msgstr ""

#: ../move/move.pm:423
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Augnablik, stilli öryggisþrep..."

#: ../move/move.pm:445
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Sérsniðin uppsetning"

#: ../move/move.pm:455
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Augnablik, stilli öryggisþrep..."

#: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563
#: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117
#: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228
#: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384
#: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510
#: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82
#: install_steps_interactive.pm:40 interactive/http.pm:118
#: interactive/http.pm:119 network/netconnect.pm:753 network/netconnect.pm:846
#: network/netconnect.pm:849 network/netconnect.pm:894
#: network/netconnect.pm:898 network/netconnect.pm:965
#: network/netconnect.pm:1014 network/netconnect.pm:1019
#: network/netconnect.pm:1034 printer/printerdrake.pm:213
#: printer/printerdrake.pm:220 printer/printerdrake.pm:245
#: printer/printerdrake.pm:393 printer/printerdrake.pm:398
#: printer/printerdrake.pm:411 printer/printerdrake.pm:421
#: printer/printerdrake.pm:1052 printer/printerdrake.pm:1099
#: printer/printerdrake.pm:1174 printer/printerdrake.pm:1178
#: printer/printerdrake.pm:1349 printer/printerdrake.pm:1353
#: printer/printerdrake.pm:1357 printer/printerdrake.pm:1457
#: printer/printerdrake.pm:1461 printer/printerdrake.pm:1578
#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1668
#: printer/printerdrake.pm:1755 printer/printerdrake.pm:2153
#: printer/printerdrake.pm:2419 printer/printerdrake.pm:2425
#: printer/printerdrake.pm:2842 printer/printerdrake.pm:2846
#: printer/printerdrake.pm:2850 printer/printerdrake.pm:3241
#: standalone/drakTermServ:399 standalone/drakTermServ:730
#: standalone/drakTermServ:737 standalone/drakTermServ:931
#: standalone/drakTermServ:1330 standalone/drakTermServ:1335
#: standalone/drakTermServ:1342 standalone/drakTermServ:1353
#: standalone/drakTermServ:1372 standalone/drakauth:36
#: standalone/drakbackup:766 standalone/drakbackup:881
#: standalone/drakbackup:1455 standalone/drakbackup:1488
#: standalone/drakbackup:2004 standalone/drakbackup:2177
#: standalone/drakbackup:2738 standalone/drakbackup:2805
#: standalone/drakbackup:4826 standalone/drakboot:235 standalone/drakbug:267
#: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:569
#: standalone/drakconnect:571 standalone/drakconnect:587
#: standalone/drakfloppy:301 standalone/drakfloppy:305
#: standalone/drakfloppy:311 standalone/drakfont:208 standalone/drakfont:221
#: standalone/drakfont:257 standalone/drakfont:597 standalone/draksplash:21
#: standalone/logdrake:171 standalone/logdrake:415 standalone/logdrake:420
#: standalone/scannerdrake:52 standalone/scannerdrake:194
#: standalone/scannerdrake:253 standalone/scannerdrake:676
#: standalone/scannerdrake:687 standalone/scannerdrake:826
#: standalone/scannerdrake:837 standalone/scannerdrake:902 wizards.pm:95
#: wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Villa"

#: ../move/move.pm:503 install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I don't know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Óþekkt villa kom upp sem ekki er hægt að meðhöndla.\n"
"Haltu áfram á eigin ábyrgð."

#: ../move/move.pm:559 install_steps_interactive.pm:40
#, c-format
msgid "An error occurred"
msgstr "Villa kom upp"

#: ../move/move.pm:565
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:580
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Fjarlægja sýndardisk-skrá?"

#: ../move/move.pm:581
#, c-format
msgid "Simply reboot"
msgstr ""

#: ../move/tree/mdk_totem:60
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""

#: ../move/tree/mdk_totem:81
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "aðgengi að X forritum"

#: ../move/tree/mdk_totem:82
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Útvarpsstuðningur:"

#: ../move/tree/mdk_totem:87
#, c-format
msgid ""
"You can't use another CDROM when the following programs are running: \n"
"%s"
msgstr ""

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""

#: Xconfig/card.pm:16
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:17
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:18
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:22
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:23
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:24
#, c-format
msgid "64 MB or more"
msgstr "64 MB eða meira"

#: Xconfig/card.pm:211
#, c-format
msgid "X server"
msgstr "X miðlari"

#: Xconfig/card.pm:212
#, c-format
msgid "Choose an X server"
msgstr "Veldu X miðlara"

#: Xconfig/card.pm:244
#, c-format
msgid "Multi-head configuration"
msgstr "Fjölskjáa-uppsetning"

#: Xconfig/card.pm:245
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Kerfið styður við marga skjái samtímis.\n"
"Hvað viltu gera?"

#: Xconfig/card.pm:312
#, fuzzy, c-format
msgid "Can't install XFree package: %s"
msgstr "Set inn pakka %s"

#: Xconfig/card.pm:322
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Veldu minnisstærð skjákortsins"

#: Xconfig/card.pm:398
#, c-format
msgid "XFree configuration"
msgstr "XFree uppsetning"

#: Xconfig/card.pm:400
#, c-format
msgid "Which configuration of XFree do you want to have?"
msgstr "Hvaða uppsetningu af XFree viltu nota?"

#: Xconfig/card.pm:434
#, c-format
msgid "Configure all heads independently"
msgstr ""

#: Xconfig/card.pm:435
#, c-format
msgid "Use Xinerama extension"
msgstr ""

#: Xconfig/card.pm:440
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Stilla aðeins kort \"%s\"%s"

#: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23
#, c-format
msgid "XFree %s"
msgstr "XFree %s"

#: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23
#, c-format
msgid "XFree %s with 3D hardware acceleration"
msgstr ""

#: Xconfig/card.pm:470
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""

#: Xconfig/card.pm:472 Xconfig/card.pm:495
#, c-format
msgid "Your card can have 3D hardware acceleration support with XFree %s."
msgstr ""

#: Xconfig/card.pm:480 Xconfig/card.pm:501
#, c-format
msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
msgstr ""

#: Xconfig/card.pm:483
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""

#: Xconfig/card.pm:486 Xconfig/card.pm:503
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with XFree %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""

#: Xconfig/card.pm:509
#, c-format
msgid "Xpmac (installation display driver)"
msgstr "Xpmac (installation display driver)"

#: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:818
#, c-format
msgid "Custom"
msgstr "Sérsniðið"

#: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14
#: install_steps_interactive.pm:83 printer/printerdrake.pm:3871
#: standalone/draksplash:114 standalone/harddrake2:187 standalone/logdrake:176
#: standalone/scannerdrake:438
#, c-format
msgid "Quit"
msgstr "Hætta"

#: Xconfig/main.pm:115
#, c-format
msgid "Graphic Card"
msgstr "Skjákort"

#: Xconfig/main.pm:118 Xconfig/monitor.pm:100
#, c-format
msgid "Monitor"
msgstr "Skjár"

#: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228
#, c-format
msgid "Resolution"
msgstr "Upplausn"

#: Xconfig/main.pm:126
#, c-format
msgid "Test"
msgstr "Prófa"

#: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410
#: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80
#: standalone/drakconnect:254 standalone/drakconnect:263
#: standalone/drakconnect:277 standalone/drakconnect:283
#: standalone/drakconnect:381 standalone/drakconnect:382
#: standalone/drakconnect:540 standalone/drakfont:491 standalone/drakfont:551
#: standalone/harddrake2:184
#, c-format
msgid "Options"
msgstr "Valkostir"

#: Xconfig/main.pm:180
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Vista stillingar?\n"
"núverandi stilling er:\n"
"\n"
"%s"

#: Xconfig/monitor.pm:101
#, c-format
msgid "Choose a monitor"
msgstr "Veldu skjá"

#: Xconfig/monitor.pm:107
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"

#: Xconfig/monitor.pm:108 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Almenn"

#: Xconfig/monitor.pm:109 standalone/drakconnect:520 standalone/harddrake2:68
#: standalone/harddrake2:69
#, c-format
msgid "Vendor"
msgstr "Framleiðandi"

#: Xconfig/monitor.pm:119
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play skönnun mistókst, vinsamlega veldu réttan skjá"

#: Xconfig/monitor.pm:124
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Hér þarf að gefa upp 'horizontal sync' tíðni skjásins þíns. Þú getur\n"
"valið tíðnisvið að neðan sem passar við staðlaða skjái eða gefið upp\n"
"eitthvað annað.\n"
"\n"
"það er MJÖG MIKILVÆGT að velja ekki of hátt tíðnisvið fyrir skjáinn. Hafir\n"
"þú einhverjar efasemdir, veldu þá lægri stillingar."

#: Xconfig/monitor.pm:131
#, c-format
msgid "Horizontal refresh rate"
msgstr "Lárétt tíðni"

#: Xconfig/monitor.pm:132
#, c-format
msgid "Vertical refresh rate"
msgstr "Lóðrétt tíðni"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 litir (8 bits)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 þúsund litir (15 bits)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 þúsund litir (16 bits)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 miljón litir (24 bits)"

#: Xconfig/resolution_and_depth.pm:16
#, c-format
msgid "4 billion colors (32 bits)"
msgstr "4 miljarðar lita (32 bits)"

#: Xconfig/resolution_and_depth.pm:141
#, c-format
msgid "Resolutions"
msgstr "Upplausnir"

#: Xconfig/resolution_and_depth.pm:275
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Veldu upplausn og fjölda lita"

#: Xconfig/resolution_and_depth.pm:276
#, c-format
msgid "Graphics card: %s"
msgstr "Skjákort: %s"

#: Xconfig/resolution_and_depth.pm:289 interactive.pm:403
#: interactive/gtk.pm:734 interactive/http.pm:103 interactive/http.pm:157
#: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakbackup:4320 standalone/drakbackup:4352
#: standalone/drakbackup:4445 standalone/drakbackup:4462
#: standalone/drakbackup:4563 standalone/drakconnect:162
#: standalone/drakconnect:734 standalone/drakconnect:821
#: standalone/drakconnect:964 standalone/net_monitor:303 ugtk2.pm:412
#: ugtk2.pm:509 ugtk2.pm:1047 ugtk2.pm:1070
#, c-format
msgid "Ok"
msgstr "Í lagi"

#: Xconfig/resolution_and_depth.pm:289 any.pm:858 diskdrake/smbnfs_gtk.pm:81
#: help.pm:197 help.pm:457 install_steps_gtk.pm:488
#: install_steps_interactive.pm:787 interactive.pm:404 interactive/gtk.pm:738
#: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307
#: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:2920
#: standalone/drakautoinst:200 standalone/drakbackup:4284
#: standalone/drakbackup:4311 standalone/drakbackup:4336
#: standalone/drakbackup:4369 standalone/drakbackup:4395
#: standalone/drakbackup:4421 standalone/drakbackup:4478
#: standalone/drakbackup:4504 standalone/drakbackup:4534
#: standalone/drakbackup:4558 standalone/drakconnect:161
#: standalone/drakconnect:819 standalone/drakconnect:973
#: standalone/drakfont:657 standalone/drakfont:734 standalone/logdrake:176
#: standalone/net_monitor:299 ugtk2.pm:406 ugtk2.pm:507 ugtk2.pm:516
#: ugtk2.pm:1047
#, c-format
msgid "Cancel"
msgstr "Hætta við"

#: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154
#: install_steps_gtk.pm:267 install_steps_gtk.pm:667 interactive.pm:498
#: interactive/gtk.pm:620 interactive/gtk.pm:622 standalone/drakTermServ:313
#: standalone/drakbackup:4281 standalone/drakbackup:4308
#: standalone/drakbackup:4333 standalone/drakbackup:4366
#: standalone/drakbackup:4392 standalone/drakbackup:4418
#: standalone/drakbackup:4459 standalone/drakbackup:4475
#: standalone/drakbackup:4501 standalone/drakbackup:4530
#: standalone/drakbackup:4555 standalone/drakbackup:4580
#: standalone/drakbug:157 standalone/drakconnect:157
#: standalone/drakconnect:227 standalone/drakfont:509 standalone/drakperm:134
#: standalone/draksec:285 standalone/harddrake2:183 ugtk2.pm:1160
#: ugtk2.pm:1161
#, c-format
msgid "Help"
msgstr "Hjálp"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Prófun á stillingum"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Viltu prófa stillingarnar?"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Viðvörun: Prófun á þessu skjákorti gæti fryst tölvuna þína"

#: Xconfig/test.pm:71
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Villa kom  upp:\n"
"%s\n"
"Reyndu að breyta einhverjum stillingum"

#: Xconfig/test.pm:149
#, c-format
msgid "Leaving in %d seconds"
msgstr "Hætti eftir %d sekúndur"

#: Xconfig/test.pm:149
#, c-format
msgid "Is this the correct setting?"
msgstr "Er þetta rétt stilling?"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Tegund lyklaborðs: %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Tegund músar: %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Mús: %s\n"

#: Xconfig/various.pm:32
#, c-format
msgid "Monitor: %s\n"
msgstr "Skjár: %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Lárétt tíðni skjás: %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Lóðrétt tíðni skjás: %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Graphics card: %s\n"
msgstr "Skjákort: %s\n"

#: Xconfig/various.pm:36
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Skjákortsminni: %s kB\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Color depth: %s\n"
msgstr "Litadýpt: %s\n"

#: Xconfig/various.pm:39
#, c-format
msgid "Resolution: %s\n"
msgstr "Upplausnir: %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "XFree86 server: %s\n"
msgstr "XFree86 miðlari: %s\n"

#: Xconfig/various.pm:42
#, c-format
msgid "XFree86 driver: %s\n"
msgstr "XFree86 rekill: %s\n"

#: Xconfig/various.pm:71
#, c-format
msgid "Graphical interface at startup"
msgstr "Grafískt viðmót í ræsingu"

#: Xconfig/various.pm:73
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(XFree) upon booting.\n"
"Would you like XFree to start when you reboot?"
msgstr ""
"Ég get stillt tölvuna þína til að kveikja sjálfvirkt á X við ræsingu\n"
"Vilt þú kveikja á X við endurræsingu?"

#: Xconfig/various.pm:86
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""

#: Xconfig/various.pm:98
#, c-format
msgid "What norm is your TV using?"
msgstr "Hvaða staðal notar sjónvarpið þitt?"

#: any.pm:98 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259
#: standalone/drakconnect:164 standalone/drakxtv:90 standalone/harddrake2:133
#: standalone/service_harddrake:94
#, c-format
msgid "Please wait"
msgstr "Augnablik..."

#: any.pm:98
#, c-format
msgid "Bootloader installation in progress"
msgstr "Er að setja upp ræsistjóra"

#: any.pm:137
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Þú ákvaðst að setja ræsiforritið á disksneið.\n"
"Þetta gefur til kynna að þú hafir nú þegar ræsiforrit á harða disknum sem þú "
"ræsir af (t.d. System Commander).\n"
"\n"
"Af hvaða disk ræsir þú?"

#: any.pm:160 any.pm:192 help.pm:800
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Í ræsifærsluna (MBR)"

#: any.pm:161
#, c-format
msgid "First sector of the root partition"
msgstr "Á fyrsta geira ræsidisksneiðar"

#: any.pm:163
#, c-format
msgid "On Floppy"
msgstr "Á diskling"

#: any.pm:165 help.pm:768 help.pm:800 printer/printerdrake.pm:3238
#, c-format
msgid "Skip"
msgstr "Sleppa"

#: any.pm:170
#, c-format
msgid "SILO Installation"
msgstr "SILO uppsetning"

#: any.pm:170
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub uppsetning"

#: any.pm:171
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Hvert viltu setja ræsistjórann?"

#: any.pm:192
#, c-format
msgid "First sector of boot partition"
msgstr "Á fyrsta geira ræsidisksneiðar"

#: any.pm:204 any.pm:239
#, c-format
msgid "Bootloader main options"
msgstr "Aðalvalmöguleikar ræsiforrits"

#: any.pm:205
#, c-format
msgid "Boot Style Configuration"
msgstr "Uppsetning ræsistíls"

#: any.pm:209
#, c-format
msgid "Give the ram size in MB"
msgstr "Sláðu inn vinnsluminni í MB"

#: any.pm:211
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Valkosturinn ``Takmarka alla rofa á skipanalínu'' gerir ekkert án lykilorðs"

#: any.pm:212 any.pm:519 install_steps_interactive.pm:1158
#, c-format
msgid "The passwords do not match"
msgstr "Mismunandi lykilorð"

#: any.pm:212 any.pm:519 diskdrake/interactive.pm:1255
#: install_steps_interactive.pm:1158
#, c-format
msgid "Please try again"
msgstr "Reyndu aftur"

#: any.pm:217 any.pm:242 help.pm:768
#, c-format
msgid "Bootloader to use"
msgstr "Ræsiforrit sem á að nota"

#: any.pm:219
#, c-format
msgid "Bootloader installation"
msgstr "Uppsetning ræsistjóra"

#: any.pm:221 any.pm:244 help.pm:768
#, c-format
msgid "Boot device"
msgstr "Ræsitæki"

#: any.pm:223
#, c-format
msgid "Delay before booting default image"
msgstr "Töf áður en sjálfgefin ræsing byrjar"

#: any.pm:224 help.pm:768
#, c-format
msgid "Enable ACPI"
msgstr "Virkja ACPI"

#: any.pm:225
#, c-format
msgid "Force No APIC"
msgstr "Þvinga engan APIC"

#: any.pm:227 any.pm:546 diskdrake/smbnfs_gtk.pm:180
#: install_steps_interactive.pm:1163 network/netconnect.pm:491
#: printer/printerdrake.pm:1340 printer/printerdrake.pm:1454
#: standalone/drakbackup:1990 standalone/drakbackup:3875
#: standalone/drakconnect:916 standalone/drakconnect:944
#, c-format
msgid "Password"
msgstr "Lykilorð"

#: any.pm:228 any.pm:547 install_steps_interactive.pm:1164
#, c-format
msgid "Password (again)"
msgstr "Lykilorð (aftur)"

#: any.pm:229
#, c-format
msgid "Restrict command line options"
msgstr "Takmarka alla rofa á skipanlínu"

#: any.pm:229
#, c-format
msgid "restrict"
msgstr "takmarka"

#: any.pm:231
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Hreinsa /tmp við hverja ræsingu"

#: any.pm:232
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Nákvæm stærð vinnsluminnis (fann %d MB)"

#: any.pm:234
#, c-format
msgid "Enable multiple profiles"
msgstr "Virkja mörg snið"

#: any.pm:243
#, c-format
msgid "Init Message"
msgstr "Init skilaboð"

#: any.pm:245
#, c-format
msgid "Open Firmware Delay"
msgstr ""

#: any.pm:246
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Kjarna ræsibið:"

#: any.pm:247
#, c-format
msgid "Enable CD Boot?"
msgstr "Virkja CD ræsingu?"

#: any.pm:248
#, c-format
msgid "Enable OF Boot?"
msgstr "Virkja OF ræsingu?"

#: any.pm:249
#, c-format
msgid "Default OS?"
msgstr "Sjálfgefið stýrikerfi?"

#: any.pm:290
#, c-format
msgid "Image"
msgstr "Ræsikjarna"

#: any.pm:291 any.pm:300
#, c-format
msgid "Root"
msgstr "Rót"

#: any.pm:292 any.pm:313
#, c-format
msgid "Append"
msgstr "Bæta aftan við"

#: any.pm:294
#, c-format
msgid "Video mode"
msgstr "Skjáhamur"

#: any.pm:296
#, c-format
msgid "Initrd"
msgstr "Initrd"

#: any.pm:305 any.pm:310 any.pm:312
#, c-format
msgid "Label"
msgstr "Nafn"

#: any.pm:307 any.pm:317 harddrake/v4l.pm:236 standalone/drakfloppy:88
#: standalone/drakfloppy:94
#, c-format
msgid "Default"
msgstr "Sjálfgefið"

#: any.pm:314
#, c-format
msgid "Initrd-size"
msgstr "Initrd-stærð"

#: any.pm:316
#, c-format
msgid "NoVideo"
msgstr "NoVideo"

#: any.pm:327
#, c-format
msgid "Empty label not allowed"
msgstr "Autt er ekki leyft"

#: any.pm:328
#, c-format
msgid "You must specify a kernel image"
msgstr "Þú verður að skilgreina ræsikjarna"

#: any.pm:328
#, c-format
msgid "You must specify a root partition"
msgstr "Þú verður að hafa disksneið fyrir rótina"

#: any.pm:329
#, c-format
msgid "This label is already used"
msgstr "Þetta nafn er nú þegar í notkun."

#: any.pm:342
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Hverju viltu bæta við?"

#: any.pm:343 standalone/drakbackup:1904
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:343
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Öðru stýrikerfi (SunOS...)"

#: any.pm:344
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Öðru stýrikerfi (MacOS...)"

#: any.pm:344
#, c-format
msgid "Other OS (windows...)"
msgstr "Öðru stýrikerfi (Windows...)"

#: any.pm:372
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Hérna eru núverandi stillingar á ræsivalmynd .\n"
"Þú getur bætt við fleirum eða breytt þessum."

#: any.pm:504
#, c-format
msgid "access to X programs"
msgstr "aðgengi að X forritum"

#: any.pm:505
#, c-format
msgid "access to rpm tools"
msgstr "aðgengi að rpm tólum"

#: any.pm:506
#, c-format
msgid "allow \"su\""
msgstr "leyfa \"su\""

#: any.pm:507
#, c-format
msgid "access to administrative files"
msgstr "aðgengi að stýrikerfisskrám"

#: any.pm:508
#, c-format
msgid "access to network tools"
msgstr "aðgengi að nettólum"

#: any.pm:509
#, c-format
msgid "access to compilation tools"
msgstr "aðgengi að þróunartólum"

#: any.pm:515
#, c-format
msgid "(already added %s)"
msgstr "(%s er nú þegar til)"

#: any.pm:520
#, c-format
msgid "This password is too simple"
msgstr "Þetta lykilorð er of einfalt"

#: any.pm:521
#, c-format
msgid "Please give a user name"
msgstr "Vinsamlega sláðu inn notandanafn"

#: any.pm:522
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Notandanafnið má bara innihalda litla stafi, tölustafi, `-' og `_'"

#: any.pm:523
#, c-format
msgid "The user name is too long"
msgstr "Þetta notandanafn er of langt"

#: any.pm:524
#, c-format
msgid "This user name has already been added"
msgstr "Þetta notandanafn er nú þegar til"

#: any.pm:528
#, c-format
msgid "Add user"
msgstr "Bæta við notanda"

#: any.pm:529
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Sláðu inn notanda\n"
"%s"

#: any.pm:532 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158
#: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544
#: interactive/http.pm:152 printer/printerdrake.pm:165
#: printer/printerdrake.pm:352 printer/printerdrake.pm:3871
#: standalone/drakbackup:3094 standalone/scannerdrake:629
#: standalone/scannerdrake:779
#, c-format
msgid "Done"
msgstr "Búið"

#: any.pm:533 help.pm:52
#, c-format
msgid "Accept user"
msgstr "Samþykkja notanda"

#: any.pm:544
#, c-format
msgid "Real name"
msgstr "Nafn notanda"

#: any.pm:545 help.pm:52 printer/printerdrake.pm:1339
#: printer/printerdrake.pm:1453
#, c-format
msgid "User name"
msgstr "Notandanafn"

#: any.pm:548
#, c-format
msgid "Shell"
msgstr "Skel"

#: any.pm:550
#, c-format
msgid "Icon"
msgstr "Táknmynd"

#: any.pm:591 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"

#: any.pm:592
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Ég get stillt tölvuna þína til að stimpla sjálfkrafa inn einn notanda."

#: any.pm:593 help.pm:52
#, c-format
msgid "Do you want to use this feature?"
msgstr "Viltu nota þennan eiginleika?"

#: any.pm:594
#, c-format
msgid "Choose the default user:"
msgstr "Veldu sjálfgefinn notanda:"

#: any.pm:595
#, c-format
msgid "Choose the window manager to run:"
msgstr "Veldu gluggastjórann sem þú vilt nota:"

#: any.pm:607
#, c-format
msgid "Please choose a language to use."
msgstr "Vinsamlega veldu tungumál sem á að nota."

#: any.pm:628
#, c-format
msgid ""
"Mandrake Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrake linux getur stutt mörg tungumál.  Veldu tungumál\n"
"sem þú vilt setja upp stuðning fyrir.  Þau verða tiltæk þegar\n"
"uppsetningu er lokið. og þú endurræsir kerfið."

#: any.pm:646 help.pm:660
#, c-format
msgid "Use Unicode by default"
msgstr "Sjálfgefið að nota Unicode"

#: any.pm:647 help.pm:660
#, c-format
msgid "All languages"
msgstr "Öll tungumál"

#: any.pm:683 help.pm:581 help.pm:991 install_steps_interactive.pm:907
#, c-format
msgid "Country / Region"
msgstr "Land / Svæði"

#: any.pm:684
#, c-format
msgid "Please choose your country."
msgstr "Veldu þér land,"

#: any.pm:686
#, c-format
msgid "Here is the full list of available countries"
msgstr "Hér er listi af tiltækum löndum"

#: any.pm:687 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621
#: help.pm:991 install_steps_interactive.pm:114
#, c-format
msgid "More"
msgstr "Meira"

#: any.pm:818
#, c-format
msgid "No sharing"
msgstr "Engin miðlun"

#: any.pm:818
#, c-format
msgid "Allow all users"
msgstr "Leyfa öllum notendum"

#: any.pm:822
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"viltu leyfa notendum að miðla sínum möppum?\n"
"Ef þú leyfir þetta þá geta notendur einfaldlega smellt á \"Sameign\" í "
"Konqueror og Nautilus.\n"
"\n"
"\"Sérsniðið\" leyfir að stilla fyrir hvern notanda.\n"

#: any.pm:838
#, c-format
msgid ""
"You can export using NFS or Samba. Please select which you'd like to use."
msgstr "Þú getur miðlað með NFS eða Samba. Veldu hvort þú vilt nota."

#: any.pm:846
#, fuzzy, c-format
msgid "The package %s is going to be removed."
msgstr "Eftirfarandi pakkar verða fjarlægðir"

#: any.pm:858
#, c-format
msgid "Launch userdrake"
msgstr "Ræsa userdrake"

#: any.pm:860
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Netmiðlun einstakra notanda notar hópinn \"fileshare\". \n"
"Þú getur notað userdrake til að bæta notendum í þennan hóp."

#: authentication.pm:12
#, c-format
msgid "Local files"
msgstr "Staðbundnar skrár"

#: authentication.pm:12
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:12
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:12 authentication.pm:50
#, c-format
msgid "Windows Domain"
msgstr "Windows Lén"

#: authentication.pm:33
#, c-format
msgid "Authentication LDAP"
msgstr "Auðkenning LDAP"

#: authentication.pm:34
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Grunn DN"

#: authentication.pm:35
#, c-format
msgid "LDAP Server"
msgstr "LDAP þjónn"

#: authentication.pm:40
#, c-format
msgid "Authentication NIS"
msgstr "Auðkenning NIS"

#: authentication.pm:41
#, c-format
msgid "NIS Domain"
msgstr "NIS lén"

#: authentication.pm:42
#, c-format
msgid "NIS Server"
msgstr "NIS þjónn"

#: authentication.pm:47
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""

#: authentication.pm:49
#, c-format
msgid "Authentication Windows Domain"
msgstr "Auðkenning Windows Léns"

#: authentication.pm:51
#, c-format
msgid "Domain Admin User Name"
msgstr "Notandanafn kerfisstjóra léns"

#: authentication.pm:52
#, c-format
msgid "Domain Admin Password"
msgstr "Lykilorð kerfisstjóra léns"

#: authentication.pm:83
#, c-format
msgid "Can't use broadcast with no NIS domain"
msgstr "Get ekki notað útsendingu án NIS léns"

# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:542
#, fuzzy, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Velkomin(n) i %s styrikerfis-raesistjorann!\n"
"\n"
"Sladu a <TAB> til ad fa lista yfir mogulega valkosti.\n"
"\n"
"Til raesa einn af theim, sladu inn nafnid og sidan a <ENTER>\n"
"eda biddu i %d sekundur thar til sjalfgefin raesing hefst.\n"
"\n"

#: bootloader.pm:674
#, c-format
msgid "SILO"
msgstr "SILO"

#: bootloader.pm:676 help.pm:768
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO með grafískri valmynd"

#: bootloader.pm:677 help.pm:768
#, c-format
msgid "LILO with text menu"
msgstr "LILO með textavalmynd"

#: bootloader.pm:679
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:681
#, c-format
msgid "Yaboot"
msgstr "Yaboot"

#: bootloader.pm:1150
#, c-format
msgid "not enough room in /boot"
msgstr "ekki nægilegt pláss í /boot"

#: bootloader.pm:1178
#, c-format
msgid "You can't install the bootloader on a %s partition\n"
msgstr "Þú getur ekki sett ræsistjórann á %s disksneiðina\n"

#: bootloader.pm:1218
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""

#: bootloader.pm:1225
#, c-format
msgid ""
"The bootloader can't be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""

#: bootloader.pm:1226
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Setja inn ræsistjóra"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d mínútur"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 mínútu"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d sekúndur"

#: common.pm:196
#, c-format
msgid "Can't make screenshots before partitioning"
msgstr "Get ekki tekið skjámyndir fyrr en disksneiðar hafa verið skilgreindar"

#: common.pm:203
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "Skjámyndir verða tiltækar eftir uppsetningu í %s"

#: common.pm:268
#, c-format
msgid "kdesu missing"
msgstr "kdesu vantar"

#: common.pm:271
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper vantar"

#: crypto.pm:14 crypto.pm:28 lang.pm:231 network/adsl_consts.pm:37
#: network/adsl_consts.pm:48 network/adsl_consts.pm:58
#: network/adsl_consts.pm:68 network/adsl_consts.pm:79
#: network/adsl_consts.pm:90 network/adsl_consts.pm:100
#: network/adsl_consts.pm:110 network/netconnect.pm:46
#, c-format
msgid "France"
msgstr "Frakkland"

#: crypto.pm:15 lang.pm:207
#, c-format
msgid "Costa Rica"
msgstr "Kosta Ríka"

#: crypto.pm:16 crypto.pm:29 lang.pm:179 network/adsl_consts.pm:20
#: network/adsl_consts.pm:30 network/netconnect.pm:49
#, c-format
msgid "Belgium"
msgstr "Belgía"

#: crypto.pm:17 crypto.pm:30 lang.pm:212
#, c-format
msgid "Czech Republic"
msgstr "Tékkland"

#: crypto.pm:18 crypto.pm:31 lang.pm:213 network/adsl_consts.pm:126
#: network/adsl_consts.pm:134
#, c-format
msgid "Germany"
msgstr "Þýskaland"

#: crypto.pm:19 crypto.pm:32 lang.pm:244
#, c-format
msgid "Greece"
msgstr "Grikkland"

#: crypto.pm:20 crypto.pm:33 lang.pm:317
#, c-format
msgid "Norway"
msgstr "Noregur"

#: crypto.pm:21 crypto.pm:34 lang.pm:346 network/adsl_consts.pm:230
#, c-format
msgid "Sweden"
msgstr "Svíþjóð"

#: crypto.pm:22 crypto.pm:36 lang.pm:316 network/adsl_consts.pm:170
#: network/netconnect.pm:47
#, c-format
msgid "Netherlands"
msgstr "Holland"

#: crypto.pm:23 crypto.pm:37 lang.pm:264 network/adsl_consts.pm:150
#: network/adsl_consts.pm:160 network/netconnect.pm:48 standalone/drakxtv:48
#, c-format
msgid "Italy"
msgstr "Ítalía"

#: crypto.pm:24 crypto.pm:38 lang.pm:172
#, c-format
msgid "Austria"
msgstr "Austurríki"

#: crypto.pm:35 crypto.pm:61 lang.pm:380 network/netconnect.pm:50
#, c-format
msgid "United States"
msgstr "Bandaríkin"

#: diskdrake/dav.pm:19
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:27
#, c-format
msgid "New"
msgstr "Ný"

#: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "Aftengja"

#: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "Tengipunktur"

#: diskdrake/dav.pm:65 help.pm:137
#, c-format
msgid "Server"
msgstr "Þjónn"

#: diskdrake/dav.pm:66 diskdrake/interactive.pm:408
#: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "Tengipunktur"

#: diskdrake/dav.pm:85
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Vinsamlega gefið upp WebDAV slóð miðlara"

#: diskdrake/dav.pm:89
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "Slóðin verður að byrja á http:// eða https://"

#: diskdrake/dav.pm:111
#, c-format
msgid "Server: "
msgstr "Þjónn: "

#: diskdrake/dav.pm:112 diskdrake/interactive.pm:469
#: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225
#, c-format
msgid "Mount point: "
msgstr "Tengipunktur: "

#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233
#, c-format
msgid "Options: %s"
msgstr "Valkostir: %s"

#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995
#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065
#, c-format
msgid "Read carefully!"
msgstr "Lestu vandlega!"

#: diskdrake/hd_gtk.pm:96
#, c-format
msgid "Please make a backup of your data first"
msgstr "Vinsamlega taktu fyrst afrit af öllum gögnum"

#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""

#: diskdrake/hd_gtk.pm:156 help.pm:544
#, c-format
msgid "Wizard"
msgstr "Álfur"

#: diskdrake/hd_gtk.pm:189
#, c-format
msgid "Choose action"
msgstr "Veldu aðgerð"

#: diskdrake/hd_gtk.pm:193
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Þú hefur eina stóra FAT disksneið.\n"
"(venjulega notuð af Microsoft DOS/Windows).\n"
"Ég legg til að þú endursníðir hana\n"
"(smelltu á hana, síðan á \"Endursníða\")"

#: diskdrake/hd_gtk.pm:195
#, c-format
msgid "Please click on a partition"
msgstr "Smelltu á disksneið"

#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:475
#, c-format
msgid "Details"
msgstr "Ítarlegar"

#: diskdrake/hd_gtk.pm:255
#, c-format
msgid "No hard drives found"
msgstr "Engir harðir diskar fundust"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Swap"
msgstr "Diskminni"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:326
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:327 mouse.pm:167
#: services.pm:164 standalone/drakbackup:1947 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Annað"

#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165
#, c-format
msgid "Empty"
msgstr "Tóm"

#: diskdrake/hd_gtk.pm:331
#, c-format
msgid "Filesystem types:"
msgstr "Tegundir skráakerfa:"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``%s'' instead"
msgstr "Nota ``%s'' í staðinn"

#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353
#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569
#: diskdrake/removable.pm:26 diskdrake/removable.pm:49
#: standalone/harddrake2:67
#, c-format
msgid "Type"
msgstr "Tegund"

#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431
#, c-format
msgid "Create"
msgstr "Búa til"

#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418
#: standalone/drakperm:124 standalone/printerdrake:231
#, c-format
msgid "Delete"
msgstr "Eyða"

#: diskdrake/hd_gtk.pm:353
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Nota ``Aftengja'' fyrst"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose another partition"
msgstr "Veldu aðra disksneið"

#: diskdrake/interactive.pm:179
#, c-format
msgid "Choose a partition"
msgstr "Veldu disksneið"

#: diskdrake/interactive.pm:208
#, c-format
msgid "Exit"
msgstr "Hætta"

#: diskdrake/interactive.pm:241 help.pm:544
#, c-format
msgid "Undo"
msgstr "Afturkalla"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to normal mode"
msgstr "Fara í venjulegan ham"

#: diskdrake/interactive.pm:241
#, c-format
msgid "Toggle to expert mode"
msgstr "Færa í snillingsham"

#: diskdrake/interactive.pm:260
#, c-format
msgid "Continue anyway?"
msgstr "Halda samt áfram?"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without saving"
msgstr "Hætta án þess að vista"

#: diskdrake/interactive.pm:265
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Hætta án þess að skrifa sneiðatöfluna?"

#: diskdrake/interactive.pm:270
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Viltu vista /etc/fstab breytingar"

#: diskdrake/interactive.pm:277 install_steps_interactive.pm:301
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Þú verður að ræsa tölvuna aftur svo breytingar á sneiðatöflunni taki gildi"

#: diskdrake/interactive.pm:290 help.pm:544
#, c-format
msgid "Clear all"
msgstr "Hreinsa allt"

#: diskdrake/interactive.pm:291 help.pm:544
#, c-format
msgid "Auto allocate"
msgstr "Ráðstafa skjálfkrafa"

#: diskdrake/interactive.pm:297
#, c-format
msgid "Hard drive information"
msgstr "Sýna upplýsingar um harðan disk"

#: diskdrake/interactive.pm:329
#, c-format
msgid "All primary partitions are used"
msgstr "Allar aðal-skráarsneiðar eru í notkun"

#: diskdrake/interactive.pm:330
#, c-format
msgid "I can't add any more partition"
msgstr "Get ekki bætt við disksneiðum"

#: diskdrake/interactive.pm:331
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Til að fá fleiri disksneiðar, vinsamlega eyddu einni til að búa til "
"viðbótarsneið"

#: diskdrake/interactive.pm:342 help.pm:544
#, c-format
msgid "Save partition table"
msgstr "Vista sneiðatöflu"

#: diskdrake/interactive.pm:343 help.pm:544
#, c-format
msgid "Restore partition table"
msgstr "Endurheimta sneiðatöflunna"

#: diskdrake/interactive.pm:344 help.pm:544
#, c-format
msgid "Rescue partition table"
msgstr "Bjarga sneiðatöflunni"

#: diskdrake/interactive.pm:346 help.pm:544
#, c-format
msgid "Reload partition table"
msgstr "Endurhlaða sneiðatöflunna"

# ## skrytid
#: diskdrake/interactive.pm:348
#, c-format
msgid "Removable media automounting"
msgstr "Sjálfvirk tenging aukatækja"

#: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377
#, c-format
msgid "Select file"
msgstr "Veljið skrá"

#: diskdrake/interactive.pm:364
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Disksneiðin sem var tekin sem afrit er ekki af sömu stærð\n"
"Halda áfram?"

#: diskdrake/interactive.pm:378 harddrake/sound.pm:222 keyboard.pm:311
#: network/netconnect.pm:353 printer/printerdrake.pm:2159
#: printer/printerdrake.pm:3246 printer/printerdrake.pm:3365
#: printer/printerdrake.pm:4338 standalone/drakTermServ:1040
#: standalone/drakTermServ:1715 standalone/drakbackup:765
#: standalone/drakbackup:865 standalone/drakboot:137 standalone/drakclock:200
#: standalone/drakconnect:856 standalone/drakfloppy:295
#, c-format
msgid "Warning"
msgstr "Aðvörun"

#: diskdrake/interactive.pm:379
#, c-format
msgid ""
"Insert a floppy in drive\n"
"All data on this floppy will be lost"
msgstr ""
"Settu diskling í drifið\n"
"Öll gögn á þessum diskling tapast"

#: diskdrake/interactive.pm:390
#, c-format
msgid "Trying to rescue partition table"
msgstr "Reyni að endurheimta disksneiðatöfluna"

#: diskdrake/interactive.pm:396
#, c-format
msgid "Detailed information"
msgstr "Ítarlegri upplýsingar"

#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706
#, c-format
msgid "Resize"
msgstr "Breyta stærð"

#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774
#, c-format
msgid "Move"
msgstr "Færa"

#: diskdrake/interactive.pm:413
#, c-format
msgid "Format"
msgstr "Forsníða"

#: diskdrake/interactive.pm:415
#, c-format
msgid "Add to RAID"
msgstr "Bæta við RAID"

#: diskdrake/interactive.pm:416
#, c-format
msgid "Add to LVM"
msgstr "Bæta við LVM"

#: diskdrake/interactive.pm:419
#, c-format
msgid "Remove from RAID"
msgstr "Taka úr RAID"

#: diskdrake/interactive.pm:420
#, c-format
msgid "Remove from LVM"
msgstr "Taka úr LVM"

#: diskdrake/interactive.pm:421
#, c-format
msgid "Modify RAID"
msgstr "Breyta RAID"

#: diskdrake/interactive.pm:422
#, c-format
msgid "Use for loopback"
msgstr "Nota fyrir sýndardisk"

#: diskdrake/interactive.pm:462
#, c-format
msgid "Create a new partition"
msgstr "Búa til nýja disksneið"

#: diskdrake/interactive.pm:465
#, c-format
msgid "Start sector: "
msgstr "Byrjunar geiri"

#: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876
#, c-format
msgid "Size in MB: "
msgstr "Stærð í MB: "

#: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877
#, c-format
msgid "Filesystem type: "
msgstr "Tegund skráakerfis:"

#: diskdrake/interactive.pm:473
#, c-format
msgid "Preference: "
msgstr "Valkostur:"

#: diskdrake/interactive.pm:476
#, c-format
msgid "Logical volume name "
msgstr "Nafn lógiskrar disksneiðar"

#: diskdrake/interactive.pm:505
#, c-format
msgid ""
"You can't create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""

#: diskdrake/interactive.pm:535
#, c-format
msgid "Remove the loopback file?"
msgstr "Fjarlægja sýndardisk-skrá?"

#: diskdrake/interactive.pm:554
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "Eftir breytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"

#: diskdrake/interactive.pm:565
#, c-format
msgid "Change partition type"
msgstr "Breyta tegund sneiðar"

#: diskdrake/interactive.pm:566 diskdrake/removable.pm:48
#, c-format
msgid "Which filesystem do you want?"
msgstr "Hvaða skráarkerfi viltu?"

#: diskdrake/interactive.pm:574
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Breyti frá ext2 í ext3"

#: diskdrake/interactive.pm:603
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Hvar viltu tengja sýndardisk-skrá %s?"

#: diskdrake/interactive.pm:604
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Hvar viltu tengja tæki %s?"

#: diskdrake/interactive.pm:609
#, c-format
msgid ""
"Can't unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Get ekki aftengt tengipunkt þar sem þessi disksneið inniheldur\n"
"sýndardisk-skrá.  Fjarlægðu sýndardiskinn fyrst (aftengdu)."

#: diskdrake/interactive.pm:634
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Hvar viltu tengja tæki %s?"

#: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738
#: install_interactive.pm:156 install_interactive.pm:186
#, c-format
msgid "Resizing"
msgstr "Breyta stærð"

#: diskdrake/interactive.pm:658
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Reikna takmarkanir FAT skráarkerfis"

#: diskdrake/interactive.pm:694
#, c-format
msgid "This partition is not resizeable"
msgstr "Ekki er hægt að breyta stærð á þessarri disksneið"

#: diskdrake/interactive.pm:699
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Öll gögn á þessari disksneið ætti að afrita"

#: diskdrake/interactive.pm:701
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Eftir stærðarbreytingu á sneið %s, hafa öll gögn á þessari disksneið tapast"

#: diskdrake/interactive.pm:706
#, c-format
msgid "Choose the new size"
msgstr "Veldu nýja stærð"

#: diskdrake/interactive.pm:707
#, c-format
msgid "New size in MB: "
msgstr "Stærð í MB: "

#: diskdrake/interactive.pm:751 install_interactive.pm:194
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:775
#, c-format
msgid "Which disk do you want to move it to?"
msgstr "Hvaða disk viltu færa til?"

#: diskdrake/interactive.pm:776
#, c-format
msgid "Sector"
msgstr "Geiri"

#: diskdrake/interactive.pm:777
#, c-format
msgid "Which sector do you want to move it to?"
msgstr "Hvaða geira viltu færa gögn til?"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving"
msgstr "Færi"

#: diskdrake/interactive.pm:780
#, c-format
msgid "Moving partition..."
msgstr "Færi disksneið..."

#: diskdrake/interactive.pm:802
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Veldu RAID sem til er fyrir til að bæta við"

#: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820
#, c-format
msgid "new"
msgstr "ný"

#: diskdrake/interactive.pm:818
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Veldu LVM sem til er fyrir til að bæta við"

#: diskdrake/interactive.pm:824
#, c-format
msgid "LVM name?"
msgstr "LVM nafn?"

#: diskdrake/interactive.pm:861
#, c-format
msgid "This partition can't be used for loopback"
msgstr "Það er ekki hægt að nota þessa sneið fyrir sýndardisk"

#: diskdrake/interactive.pm:874
#, c-format
msgid "Loopback"
msgstr "Sýndardiskur"

#: diskdrake/interactive.pm:875
#, c-format
msgid "Loopback file name: "
msgstr "Skráarnafn sýndardisks: "

#: diskdrake/interactive.pm:880
#, c-format
msgid "Give a file name"
msgstr "Gefðu upp skráarnafn"

#: diskdrake/interactive.pm:883
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""

#: diskdrake/interactive.pm:884
#, c-format
msgid "File already exists. Use it?"
msgstr "Skráin er þegar til, nota hana?"

#: diskdrake/interactive.pm:907
#, c-format
msgid "Mount options"
msgstr "Tengistillingar"

#: diskdrake/interactive.pm:914
#, c-format
msgid "Various"
msgstr "Ýmislegt"

#: diskdrake/interactive.pm:978
#, c-format
msgid "device"
msgstr "tæki"

#: diskdrake/interactive.pm:979
#, c-format
msgid "level"
msgstr "stig"

#: diskdrake/interactive.pm:980
#, c-format
msgid "chunk size"
msgstr "stærð hlutar"

#: diskdrake/interactive.pm:996
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Varaðu þig: þessi aðgerð er hættuleg."

#: diskdrake/interactive.pm:1011
#, c-format
msgid "What type of partitioning?"
msgstr "Hvaða tegund af disksneiðingu?"

#: diskdrake/interactive.pm:1027
#, c-format
msgid "The package %s is needed. Install it?"
msgstr "Pakka %s er þörf, setja hann inn?"

#: diskdrake/interactive.pm:1056
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Þú þarft að endurræsa áður en breytingar taka gildi"

#: diskdrake/interactive.pm:1065
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Disksneiðatafla drifs %s mun verða skrifuð á disk!"

#: diskdrake/interactive.pm:1078
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Eftir að diskssneið %s hefur verið forsniðin, hafa öll gögn á þessari "
"disksneið tapast"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Move files to the new partition"
msgstr "Flytja skrár á nýju disksneiðina"

#: diskdrake/interactive.pm:1095
#, c-format
msgid "Hide files"
msgstr "Fela skrár"

#: diskdrake/interactive.pm:1096
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Mappa %s inniheldur nú þegar gögn\n"
"(%s)"

#: diskdrake/interactive.pm:1107
#, c-format
msgid "Moving files to the new partition"
msgstr "Færi skrár á nýju disksneiðina"

#: diskdrake/interactive.pm:1111
#, c-format
msgid "Copying %s"
msgstr "Afrita %s"

#: diskdrake/interactive.pm:1115
#, c-format
msgid "Removing %s"
msgstr "Fjarlægi %s"

#: diskdrake/interactive.pm:1129
#, c-format
msgid "partition %s is now known as %s"
msgstr "disksneið %s er þekkt sem %s"

#: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210
#, c-format
msgid "Device: "
msgstr "Tæki: "

#: diskdrake/interactive.pm:1151
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS drifstafur: %s (bara ágiskun)\n"

#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Type: "
msgstr "Tegund: "

#: diskdrake/interactive.pm:1159 install_steps_gtk.pm:339
#, c-format
msgid "Name: "
msgstr "Nafn: "

#: diskdrake/interactive.pm:1167
#, c-format
msgid "Start: sector %s\n"
msgstr "Byrja: geiri %s\n"

#: diskdrake/interactive.pm:1168
#, c-format
msgid "Size: %s"
msgstr "Stærð: %s"

#: diskdrake/interactive.pm:1170
#, c-format
msgid ", %s sectors"
msgstr ", %s geirar"

#: diskdrake/interactive.pm:1172
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Sívalningur %d til %d\n"

#: diskdrake/interactive.pm:1173
#, c-format
msgid "Number of logical extents: %d"
msgstr ""

#: diskdrake/interactive.pm:1174
#, c-format
msgid "Formatted\n"
msgstr "Forsniðinn\n"

#: diskdrake/interactive.pm:1175
#, c-format
msgid "Not formatted\n"
msgstr "Ekki forsniðinn\n"

#: diskdrake/interactive.pm:1176
#, c-format
msgid "Mounted\n"
msgstr "Tengdur\n"

#: diskdrake/interactive.pm:1177
#, c-format
msgid "RAID md%s\n"
msgstr "RAID md%s\n"

#: diskdrake/interactive.pm:1179
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""

#: diskdrake/interactive.pm:1180
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Sjálfgefin disksneið ræst\n"
"    (fyrir MS-DOS ræsingu, ekki fyrir LILO)\n"

#: diskdrake/interactive.pm:1182
#, c-format
msgid "Level %s\n"
msgstr "Stig %s\n"

#: diskdrake/interactive.pm:1183
#, c-format
msgid "Chunk size %s\n"
msgstr "Hlunkastærð %s\n"

#: diskdrake/interactive.pm:1184
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diskar %s\n"

#: diskdrake/interactive.pm:1186
#, c-format
msgid "Loopback file name: %s"
msgstr ""

#: diskdrake/interactive.pm:1189
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""

#: diskdrake/interactive.pm:1192
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""

#: diskdrake/interactive.pm:1211
#, c-format
msgid "Read-only"
msgstr "Ritvarið"

#: diskdrake/interactive.pm:1212
#, c-format
msgid "Size: %s\n"
msgstr "Stærð: %s\n"

#: diskdrake/interactive.pm:1213
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Skilgreining: %s sívalningar, %s hausar, %s geirar\n"

#: diskdrake/interactive.pm:1214
#, c-format
msgid "Info: "
msgstr "Upplýsingar: "

#: diskdrake/interactive.pm:1215
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diskar %s\n"

#: diskdrake/interactive.pm:1216
#, c-format
msgid "Partition table type: %s\n"
msgstr "Disksneiðartöflu tegund: %s\n"

#: diskdrake/interactive.pm:1217
#, c-format
msgid "on channel %d id %d\n"
msgstr "á gagnabraut %d id %d\n"

#: diskdrake/interactive.pm:1250
#, c-format
msgid "Filesystem encryption key"
msgstr "Dulritunarlykill skráakerfis"

#: diskdrake/interactive.pm:1251
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Veldu dulritunarlykil fyrir skráarkerfið"

#: diskdrake/interactive.pm:1254
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"

#: diskdrake/interactive.pm:1255
#, c-format
msgid "The encryption keys do not match"
msgstr "Dulritunarlyklarnir eru mismunandi"

#: diskdrake/interactive.pm:1258 network/netconnect.pm:889
#: standalone/drakconnect:370
#, c-format
msgid "Encryption key"
msgstr "Dulritunarlykill"

#: diskdrake/interactive.pm:1259
#, c-format
msgid "Encryption key (again)"
msgstr "Dulritunarlykill (aftur)"

#: diskdrake/removable.pm:47
#, c-format
msgid "Change type"
msgstr "Breyta tegund"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can't login using username %s (bad password?)"
msgstr "Get ekki tengst sem notandi %s (vitlaust lykilorð?)"

#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "Lénsauðkenningar er þörf"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "hvaða notandanafn"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "Önnur"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Vinsamlega gefðu upp notandanafn, lykilorð og nafn léns til að fá aðgang að "
"þessum miðlara"

#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3874
#, c-format
msgid "Username"
msgstr "Notandanafn"

#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Lén"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "Leita að þjónum"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "Leita að nýjum þjónum"

#: do_pkgs.pm:21
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Pakkinn %s þarfnast innsetningar, viltu setja hann inn?"

#: do_pkgs.pm:26
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Vantar nauðsynlegan pakka %s"

#: do_pkgs.pm:136
#, c-format
msgid "Installing packages..."
msgstr "Set inn pakka..."

#: do_pkgs.pm:210
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Fjarlægi %s..."

#: fs.pm:399
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs.pm:402
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs.pm:405
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs.pm:407
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs.pm:411
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs.pm:415
#, c-format
msgid "Mount the file system read-only."
msgstr ""

#: fs.pm:417
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs.pm:421
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""

#: fs.pm:429
#, c-format
msgid "Give write access to ordinary users"
msgstr "Veita skrifleyfi til venjulegra notenda"

#: fs.pm:565 fs.pm:575 fs.pm:579 fs.pm:583 fs.pm:587 fs.pm:591 swap.pm:12
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s forsniðið á %s mistókst"

#: fs.pm:628
#, c-format
msgid "I don't know how to format %s in type %s"
msgstr "kann ekki að forsníða %s af tegundinni %s"

#: fs.pm:635 fs.pm:642
#, c-format
msgid "Formatting partition %s"
msgstr "Forsníð disksneið %s"

#: fs.pm:639
#, c-format
msgid "Creating and formatting file %s"
msgstr "bý til og forsníð skrá %s"

#: fs.pm:705 fs.pm:758
#, c-format
msgid "Mounting partition %s"
msgstr "Tengi disksneið %s"

#: fs.pm:706 fs.pm:759
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "tenging disksneiðar %s í möppu %s mistókst"

#: fs.pm:726 fs.pm:734
#, c-format
msgid "Checking %s"
msgstr "Athuga %s"

#: fs.pm:775 partition_table.pm:636
#, c-format
msgid "error unmounting %s: %s"
msgstr "villa við að aftengja %s: %s"

#: fs.pm:807
#, c-format
msgid "Enabling swap partition %s"
msgstr "Virkja diskminni á disksneið %s"

#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr "einfalt"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "með /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "netþjónn"

#: fsedit.pm:254
#, c-format
msgid ""
"I can't read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Ég get ekki lesið disksneiðatöflu þína á tæki %s, hún er of skemmd fyrir "
"mig :(\n"
"Ég mun reyna að halda áfram með því að hreinsa skemmdar disksneiðar \n"
"(Öll gögn tapast!). Önnur lausn er að láta DrakX ekki breyta "
"disksneiðatöflunni\n"
"(villan er %s)\n"
"\n"
"Viltu eyða öllum þessum disksneiðum?\n"

#: fsedit.pm:514
#, c-format
msgid "You can't use JFS for partitions smaller than 16MB"
msgstr "Þú getur ekki notað JFS á disksneiðar minni en 16MB"

#: fsedit.pm:515
#, c-format
msgid "You can't use ReiserFS for partitions smaller than 32MB"
msgstr "Þú getur ekki notað ReiserFs á disksneiðar minni en 32MB"

#: fsedit.pm:534
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Heiti tengipunkta verða að byrja á /."

#: fsedit.pm:535
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Heiti tengipunkta eiga aðeins að innihalda bókstafi og tölur"

#: fsedit.pm:536
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Það er þegar disksneið með tengipunktinn %s\n"

#: fsedit.pm:538
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Þú hefur valið að nota RAID hugbúnað til að stjórna rótarsneið (/).\\ Enginn "
"ræsistjóri ræður við þetta án sérstakrar /boot sneiðar.\n"
"Vinsamlega passaðu uppá að bæta við sneið fyrir /boot"

#: fsedit.pm:541
#, c-format
msgid "You can't use a LVM Logical Volume for mount point %s"
msgstr "Þú gtur ekki notað LVM sýndardisk fyrir tengipunkt %s"

#: fsedit.pm:543
#, c-format
msgid ""
"You may not be able to install lilo (since lilo doesn't handle a LV on "
"multiple PVs)"
msgstr ""

#: fsedit.pm:546 fsedit.pm:548
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Þessi mappa ætti að vera í rótarskráarkerfinu"

#: fsedit.pm:550
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Þú þarft raunverulegt skráarkerfi (ext2/ext3, reiserfs, xfs, eða jfs) fyrir "
"þennan tengipunkt\n"

#: fsedit.pm:552
#, c-format
msgid "You can't use an encrypted file system for mount point %s"
msgstr "Þú getur ekki notað dulritað skráarkerfi á tengipunkt %s"

#: fsedit.pm:613
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Ekki nægilegt pláss til sjálfvirkrar úthlutunar"

#: fsedit.pm:615
#, c-format
msgid "Nothing to do"
msgstr "Ekkert að gera"

#: fsedit.pm:711
#, c-format
msgid "Error opening %s for writing: %s"
msgstr "Villa við að opna %s til skriftar: %s"

#: harddrake/data.pm:53
#, c-format
msgid "Floppy"
msgstr "Disklingadrif"

#: harddrake/data.pm:54
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:55
#, c-format
msgid "Disk"
msgstr "Diskur"

#: harddrake/data.pm:56
#, c-format
msgid "CDROM"
msgstr "CDROM"

#: harddrake/data.pm:57
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD skrifarar"

#: harddrake/data.pm:58
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:59 standalone/drakbackup:2409
#, c-format
msgid "Tape"
msgstr "Segulband"

#: harddrake/data.pm:60
#, c-format
msgid "Videocard"
msgstr "Skjákort"

#: harddrake/data.pm:61
#, c-format
msgid "Tvcard"
msgstr "Sjónvarpskort"

#: harddrake/data.pm:62
#, c-format
msgid "Other MultiMedia devices"
msgstr "Önnur margmiðlunartæki"

#: harddrake/data.pm:63
#, c-format
msgid "Soundcard"
msgstr "Hljóðkort"

#: harddrake/data.pm:64
#, c-format
msgid "Webcam"
msgstr "Vefmyndavél"

#: harddrake/data.pm:68
#, c-format
msgid "Processors"
msgstr "Örgjörvar"

#: harddrake/data.pm:69
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "ISDN spjald"

#: harddrake/data.pm:71
#, c-format
msgid "Ethernetcard"
msgstr "Netkort"

#: harddrake/data.pm:79 network/netconnect.pm:366 standalone/drakconnect:277
#: standalone/drakconnect:447 standalone/drakconnect:448
#: standalone/drakconnect:540
#, c-format
msgid "Modem"
msgstr "Módald"

#: harddrake/data.pm:80
#, c-format
msgid "ADSL adapters"
msgstr ""

#: harddrake/data.pm:82
#, c-format
msgid "Bridges and system controllers"
msgstr "Brýr og kerfisstýringar"

#: harddrake/data.pm:83 help.pm:203 help.pm:991
#: install_steps_interactive.pm:935 printer/printerdrake.pm:680
#: printer/printerdrake.pm:3970
#, c-format
msgid "Printer"
msgstr "Prentari"

#: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:928
#, c-format
msgid "Mouse"
msgstr "Mús"

#: harddrake/data.pm:90
#, c-format
msgid "Joystick"
msgstr "Gleðigandur"

#: harddrake/data.pm:92
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA stýringar"

#: harddrake/data.pm:93
#, c-format
msgid "Firewire controllers"
msgstr "Firewire stýringar"

#: harddrake/data.pm:94
#, c-format
msgid "SCSI controllers"
msgstr "SCSI stýringar"

#: harddrake/data.pm:95
#, c-format
msgid "USB controllers"
msgstr "USB stýringar"

#: harddrake/data.pm:96
#, c-format
msgid "SMBus controllers"
msgstr "SMBus stýringar"

#: harddrake/data.pm:97
#, c-format
msgid "Scanner"
msgstr "Myndskanni"

#: harddrake/data.pm:99 standalone/harddrake2:315
#, c-format
msgid "Unknown/Others"
msgstr "Óþekkt/annað"

#: harddrake/data.pm:113
#, c-format
msgid "cpu # "
msgstr "cpu # "

#: harddrake/sound.pm:150 standalone/drakconnect:166
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Augnablik... Framkvæmi stillingar"

#: harddrake/sound.pm:182
#, c-format
msgid "No alternative driver"
msgstr "Enginn aukarekill"

#: harddrake/sound.pm:183
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Það er enginn þekktur OSS/ALSA aukarekill fyrir hljóðkortið þitt (%s) sem nú "
"notar \"%s\""

#: harddrake/sound.pm:189
#, c-format
msgid "Sound configuration"
msgstr "Hljóðuppsetning"

#: harddrake/sound.pm:191
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Hér getur þú valið annan rekil (annað hvort OSS eða ALSA) fyrir hljóðkortið "
"þitt (%s)"

#: harddrake/sound.pm:193
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Kortið þitt notar rekilinn %s\"%s\" (sjálfgefið fyrir kortið þitt er \"%s\")"

#: harddrake/sound.pm:195
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:209 harddrake/sound.pm:289
#, c-format
msgid "Driver:"
msgstr "Rekill:"

#: harddrake/sound.pm:214
#, c-format
msgid "Trouble shooting"
msgstr "Vandamálaleit"

#: harddrake/sound.pm:222
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:230
#, c-format
msgid "No open source driver"
msgstr "Enginn \"frjáls hugbúnaðar\" rekill"

#: harddrake/sound.pm:231
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Það er enginn \"frjáls\" rekill fyrir hljóðkortið þitt (%s) en það er til "
"rekill framleiðanda á \"%s\"."

#: harddrake/sound.pm:234
#, c-format
msgid "No known driver"
msgstr "Enginn þekktur rekill"

#: harddrake/sound.pm:235
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Það er enginn þekktur rekill fyrir hljóðkortið þitt (%s)"

#: harddrake/sound.pm:239
#, c-format
msgid "Unknown driver"
msgstr "Óþekktur rekill"

#: harddrake/sound.pm:240
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Villa: rekillinn \"%s\" er ekki á listanum"

#: harddrake/sound.pm:253
#, c-format
msgid "Sound trouble shooting"
msgstr "Vandamálaleit hljóðkorta"

#: harddrake/sound.pm:254
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:280
#, c-format
msgid "Let me pick any driver"
msgstr "Lyfðu mér að velja rekil"

#: harddrake/sound.pm:283
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Velja einhvern rekil"

#: harddrake/sound.pm:284
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Ef þú heldur að þú vitir hvaða rekill sé réttur fyrir kortið þitt\n"
"þá getur þú valið einn í listanum hér að ofan\n"
"\n"
"Núverandi rekill fyrir \"%s\" hljóðkortið er \"%s\"."

#: harddrake/v4l.pm:14 harddrake/v4l.pm:66
#, c-format
msgid "Auto-detect"
msgstr "Finna sjálfkrafa"

#: harddrake/v4l.pm:67 harddrake/v4l.pm:219
#, c-format
msgid "Unknown|Generic"
msgstr "Óþekkt|almennt"

#: harddrake/v4l.pm:100
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"

#: harddrake/v4l.pm:101
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Óþekkt|CPH06X (bt878) [margir framleiðendur]"

#: harddrake/v4l.pm:245
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"GNU/Linux 'bttv' einingin finnur sjálfkrafa uppsetningu á flestum nútíma "
"sjónvarpskortum.\n"
"Ef kortið þitt er ekki sett rétt upp þá getur þú stillt móttakarann og "
"korttegundir hér. Veldu viðföng fyrir kortið þitt ef þess er þörf."

#: harddrake/v4l.pm:248
#, c-format
msgid "Card model:"
msgstr "Kort tegund:"

#: harddrake/v4l.pm:249
#, c-format
msgid "Tuner type:"
msgstr "Útvarpstegund:"

#: harddrake/v4l.pm:250
#, c-format
msgid "Number of capture buffers:"
msgstr ""

#: harddrake/v4l.pm:250
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:252
#, c-format
msgid "PLL setting:"
msgstr "PLL stilling:"

#: harddrake/v4l.pm:253
#, c-format
msgid "Radio support:"
msgstr "Útvarpsstuðningur:"

#: harddrake/v4l.pm:253
#, c-format
msgid "enable radio support"
msgstr "virkja útvarps stuðning"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
"terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
"will reboot your computer."
msgstr ""

#: help.pm:14 install_steps_gtk.pm:596 install_steps_interactive.pm:88
#: install_steps_interactive.pm:697 standalone/drakautoinst:199
#, c-format
msgid "Accept"
msgstr "Samþykkja"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system, meaning each user may have their own\n"
"preferences, their own files and so on. You can read the ``Starter Guide''\n"
"to learn more about multi-user systems. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be\n"
"authorized to change anything except their own files and their own\n"
"configurations, protecting the system from unintentional or malicious\n"
"changes that impact on the system as a whole. You will have to create at\n"
"least one regular user for yourself -- this is the account which you should\n"
"use for routine, day-to-day use. Although it is very easy to log in as\n"
"\"root\" to do anything and everything, it may also be very dangerous! A\n"
"very simple mistake could mean that your system will not work any more. If\n"
"you make a serious mistake as a regular user, the worst that will happen is\n"
"that you will lose some information, but not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you typed in this field and copy it to the \"%s\" field, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that is no reason to neglect\n"
"it by making it blank or too simple: after all, your files could be the\n"
"ones at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends: your father or your sister, for example. Click \"%s\" when\n"
"you have finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you have finished adding users, you will be asked to choose a user who\n"
"can automatically log into the system when the computer boots up. If you\n"
"are interested in that feature (and do not care much about local security),\n"
"choose the desired user and window manager, then click \"%s\". If you are\n"
"not interested in this feature, uncheck the \"%s\" box."
msgstr ""

#: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005
#: install_steps_gtk.pm:275 interactive.pm:403 interactive/newt.pm:308
#: network/netconnect.pm:242 network/tools.pm:208 printer/printerdrake.pm:2922
#: standalone/drakTermServ:392 standalone/drakbackup:4487
#: standalone/drakbackup:4513 standalone/drakbackup:4543
#: standalone/drakbackup:4567 ugtk2.pm:509
#, c-format
msgid "Next"
msgstr "Næsta"

#: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768
#: interactive.pm:371
#, c-format
msgid "Advanced"
msgstr "Ítarlegra"

#: help.pm:55
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""

#: help.pm:86
#, c-format
msgid ""
"The Mandrake Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the correct CD as required."
msgstr ""

#: help.pm:91
#, c-format
msgid ""
"It is now time to specify which programs you wish to install on your\n"
"system. There are thousands of packages available for Mandrake Linux, and\n"
"to make it simpler to manage the packages have been placed into groups of\n"
"similar applications.\n"
"\n"
"Packages are sorted into groups corresponding to a particular use of your\n"
"machine. Mandrake Linux sorts packages groups in four categories. You can\n"
"mix and match applications from the various categories, so a\n"
"``Workstation'' installation can still have applications from the\n"
"``Development'' category installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups that are in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group. If you unselect all groups when performing a regular\n"
"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
"different options for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command line interface. The total size of this installation is about 65\n"
"megabytes.\n"
"\n"
"You can check the \"%s\" box, which is useful if you are familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you started the installation in \"%s\" mode, you can unselect all groups\n"
"to avoid installing any new package. This is useful for repairing or\n"
"updating an existing system."
msgstr ""

#: help.pm:137
#, c-format
msgid "Workstation"
msgstr "Vinnustöð"

#: help.pm:137
#, c-format
msgid "Development"
msgstr "Forritunartól"

#: help.pm:137
#, c-format
msgid "Graphical Environment"
msgstr "Grafískt viðmót"

#: help.pm:137 install_steps_interactive.pm:559
#, c-format
msgid "With X"
msgstr "Með X"

#: help.pm:137
#, c-format
msgid "With basic documentation"
msgstr "Með grunn handbókum"

#: help.pm:137
#, c-format
msgid "Truly minimal install"
msgstr "Alger lágmarksuppsetning"

#: help.pm:137 install_steps_gtk.pm:270 install_steps_interactive.pm:605
#, c-format
msgid "Individual package selection"
msgstr "Val á einstökum pökkum"

#: help.pm:137 help.pm:602
#, c-format
msgid "Upgrade"
msgstr "Uppfæra"

#: help.pm:140
#, c-format
msgid ""
"If you told the installer that you wanted to individually select packages,\n"
"it will present a tree containing all packages classified by groups and\n"
"subgroups. While browsing the tree, you can select entire groups,\n"
"subgroups, or individual packages.\n"
"\n"
"Whenever you select a package on the tree, a description appears on the\n"
"right to let you know the purpose of the package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you will be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrake Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that that\n"
"security holes were discovered after this version of Mandrake Linux was\n"
"finalized. If you do not know what a particular service is supposed to do\n"
"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
"install the listed services and they will be started automatically by\n"
"default during boot. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages have relationships between each them such\n"
"that installation of one package requires that some other program is also\n"
"required to be installed. The installer can determine which packages are\n"
"required to satisfy a dependency to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert a floppy disk previously created at the\n"
"end of another installation. See the second tip of last step on how to\n"
"create such a floppy."
msgstr ""

#: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:422
#: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:218
#: ugtk2.pm:1046 wizards.pm:156
#, c-format
msgid "No"
msgstr "Nei"

#: help.pm:172 help.pm:301 help.pm:457 install_any.pm:422 interactive.pm:149
#: modules/interactive.pm:71 standalone/drakgw:280 standalone/drakgw:281
#: standalone/drakgw:289 standalone/drakgw:299 standalone/harddrake2:217
#: ugtk2.pm:1046 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Já"

#: help.pm:172
#, c-format
msgid "Automatic dependencies"
msgstr ""

#: help.pm:175
#, c-format
msgid ""
"You will now set up your Internet/network connection. If you wish to\n"
"connect your computer to the Internet or to a local network, click \"%s\".\n"
"Mandrake Linux will attempt to auto-detect network devices and modems. If\n"
"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
"configure the network, or to do it later, in which case clicking the \"%s\"\n"
"button will take you to the next step.\n"
"\n"
"When configuring your network, the available connections options are:\n"
"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n"
"cable modem, and finally a simple LAN connection (Ethernet).\n"
"\n"
"We will not detail each configuration option - just make sure that you have\n"
"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
"from your Internet Service Provider or system administrator.\n"
"\n"
"About Winmodem Connection. Winmodems are special integrated low-end modems\n"
"that require additional software to work compared to Normal modems. Some of\n"
"those modems actually work under Mandrake Linux, some others do not. You\n"
"can consult the list of supported modems at LinModems.\n"
"\n"
"You can consult the ``Starter Guide'' chapter about Internet connections\n"
"for details about the configuration, or simply wait until your system is\n"
"installed and use the program described there to configure your connection."
msgstr ""

#: help.pm:197
#, c-format
msgid "Use auto detection"
msgstr "Finna sjálfvirkt"

#: help.pm:200
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to setup a new printer. The interface presented there is\n"
"similar to the one used during installation."
msgstr ""

#: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:646
#: standalone/drakbackup:2688 standalone/drakbackup:2696
#: standalone/drakbackup:2704 standalone/drakbackup:2712
#, c-format
msgid "Configure"
msgstr "Stilla"

#: help.pm:206
#, c-format
msgid ""
"This dialog is used to choose which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all the services available on the current installation.\n"
"Review each one carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you are not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you will probably not want to start any services that you do not\n"
"need. Please remember that several services can be dangerous if they are\n"
"enabled on a server. In general, select only the services you really need.\n"
"!!"
msgstr ""

#: help.pm:224
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system like Windows.\n"
"\n"
"The \"%s\" option will automatically regulate the clock by connecting to a\n"
"remote time server on the Internet. For this feature to work, you must have\n"
"a working Internet connection. It is best to choose a time server located\n"
"near you. This option actually installs a time server that can be used by\n"
"other machines on your local network as well."
msgstr ""

#: help.pm:235 install_steps_interactive.pm:834
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Tölvuklukkan stillt á GMT"

#: help.pm:235
#, c-format
msgid "Automatic time synchronization"
msgstr "Sjálfvirk tímastilling"

#: help.pm:238
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs."
msgstr ""

#: help.pm:249
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
"\n"
"You will be presented with a list of different parameters to change to get\n"
"an optimal graphical display: Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If it is not the case, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you are asked to choose the server that\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   the system will try to open a graphical screen at the desired\n"
"resolution. If you can see the message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you cannot see the message, it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds, bringing you back to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: help.pm:304
#, c-format
msgid ""
"Monitor\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"monitor connected to your machine. If it is incorrect, you can choose from\n"
"this list the monitor you actually have connected to your computer."
msgstr ""

#: help.pm:311
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"hardware. Choose the one that best suits your needs (you will be able to\n"
"change that after installation though). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""

#: help.pm:319
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you are asked to choose the server that best\n"
"suits your needs."
msgstr ""

#: help.pm:324
#, c-format
msgid ""
"Options\n"
"\n"
"   Here you can choose whether you want to have your machine automatically\n"
"switch to a graphical interface at boot. Obviously, you want to check\n"
"\"%s\" if your machine is to act as a server, or if you were not successful\n"
"in getting the display configured."
msgstr ""

#: help.pm:332
#, c-format
msgid ""
"At this point, you need to decide where you want to install the Mandrake\n"
"Linux operating system on your hard drive. If your hard drive is empty or\n"
"if an existing operating system is using all the available space you will\n"
"have to partition the drive. Basically, partitioning a hard drive consists\n"
"of logically dividing it to create the space needed to install your new\n"
"Mandrake Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to lost data if there is an existing operating system already\n"
"installed on the drive, partitioning can be intimidating and stressful if\n"
"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on your hard drive configuration, several options are available:\n"
"\n"
" * \"%s\": this option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you have previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended.. Using this option is\n"
"recommended if you want to use both Mandrake Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"then when you started. You will have less free space under Microsoft\n"
"Windows to store your data or to install new software.\n"
"\n"
" * \"%s\": if you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrake Linux system,\n"
"choose this option. Be careful, because you will not be able to undo your\n"
"choice after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
"partitioning everything from scratch. All data on your disk will be lost.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\": choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""

#: help.pm:389 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Nota laust pláss"

#: help.pm:389
#, c-format
msgid "Use existing partition"
msgstr "Nota núverandi disksneið"

#: help.pm:389 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Nota laust pláss á Windows disksneiðinni"

#: help.pm:389 install_interactive.pm:211
#, c-format
msgid "Erase entire disk"
msgstr "Eyða öllu á disknum"

#: help.pm:389
#, c-format
msgid "Remove Windows"
msgstr "Fjarlægja Windows"

#: help.pm:389 install_interactive.pm:226
#, c-format
msgid "Custom disk partitioning"
msgstr "Sérsniðin disksneiðing"

#: help.pm:392
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to use. Just click \"%s\" to reboot the system. Don't forget to\n"
"remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"bootloader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": to create an installation floppy disk that will automatically\n"
"perform a whole installation without the help of an operator, similar to\n"
"the installation you just configured.\n"
"\n"
"   Note that two different options are available after clicking the button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing a number of similar machines.\n"
"See the Auto install section on our web site for more information.\n"
"\n"
" * \"%s\": saves a list of the packages selected in this installation. To\n"
"use this selection with another installation, insert the floppy and start\n"
"the installation. At the prompt, press the [F1] key and type >>linux\n"
"defcfg=\"floppy\" <<."
msgstr ""

#: help.pm:418
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "Búa til diskling fyrir sjálfvirka uppsetningu"

#: help.pm:418 install_steps_interactive.pm:1320
#, c-format
msgid "Replay"
msgstr "Spila aftur"

#: help.pm:418 install_steps_interactive.pm:1320
#, c-format
msgid "Automated"
msgstr "Sjálfvirkt"

#: help.pm:418 install_steps_interactive.pm:1323
#, c-format
msgid "Save packages selection"
msgstr "Vista val á pakkahóp"

#: help.pm:421
#, c-format
msgid ""
"Any partitions that have been newly defined must be formatted for use\n"
"(formatting means creating a file system).\n"
"\n"
"At this time, you may wish to reformat some already existing partitions to\n"
"erase any data they contain. If you wish to do that, please select those\n"
"partitions as well.\n"
"\n"
"Please note that it is not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
"reformat partitions containing data that you wish to keep (typically\n"
"\"/home\").\n"
"\n"
"Please be careful when selecting partitions. After formatting, all data on\n"
"the selected partitions will be deleted and you will not be able to recover\n"
"it.\n"
"\n"
"Click on \"%s\" when you are ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrake Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions that will be checked for\n"
"bad blocks on the disk."
msgstr ""

#: help.pm:444 help.pm:1005 install_steps_gtk.pm:431 interactive.pm:404
#: interactive/newt.pm:307 printer/printerdrake.pm:2920
#: standalone/drakTermServ:371 standalone/drakbackup:4288
#: standalone/drakbackup:4316 standalone/drakbackup:4374
#: standalone/drakbackup:4400 standalone/drakbackup:4426
#: standalone/drakbackup:4483 standalone/drakbackup:4509
#: standalone/drakbackup:4539 standalone/drakbackup:4563 ugtk2.pm:507
#, c-format
msgid "Previous"
msgstr "Fyrri"

#: help.pm:447
#, c-format
msgid ""
"At the time you are installing Mandrake Linux, it is likely that some\n"
"packages will have been updated since the initial release. Bugs may have\n"
"been fixed, security issues resolved. To allow you to benefit from these\n"
"updates, you are now able to download them from the Internet. Check \"%s\"\n"
"if you have a working Internet connection, or \"%s\" if you prefer to\n"
"install updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of places from which updates can be\n"
"retrieved. You should choose one near to you. A package-selection tree will\n"
"appear: review the selection, and press \"%s\" to retrieve and install the\n"
"selected package(s), or \"%s\" to abort."
msgstr ""

#: help.pm:457 help.pm:602 install_steps_gtk.pm:430
#: install_steps_interactive.pm:148 standalone/drakbackup:4602
#, c-format
msgid "Install"
msgstr "Innsetning"

#: help.pm:460
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level desired\n"
"for the machine. As a rule of thumb, the security level should be set\n"
"higher if the machine will contain crucial data, or if it will be a machine\n"
"directly exposed to the Internet. The trade-off of a higher security level\n"
"is generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, stay with the default option. You will\n"
"be able to change that security level later with tool draksec from the\n"
"Mandrake Control Center.\n"
"\n"
"The \"%s\" field can inform the system of the user on this computer who\n"
"will be responsible for security. Security messages will be sent to that\n"
"address."
msgstr ""

#: help.pm:472
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "Öryggisfulltrúi:"

#: help.pm:475
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrake Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it doesn't always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""

# ## skrytid
#: help.pm:544
#, fuzzy, c-format
msgid "Removable media auto-mounting"
msgstr "Sjálfvirk tenging aukatækja"

#: help.pm:544
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Víxla milli venjulegs/sérfræðings-hams"

#: help.pm:547
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrake Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""

#: help.pm:578
#, c-format
msgid ""
"\"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list."
msgstr ""

#: help.pm:584
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new install or an upgrade\n"
"of an existing Mandrake Linux system:\n"
"\n"
" * \"%s\": For the most part, this completely wipes out the old system. If\n"
"you wish to change how your hard drives are partitioned, or change the file\n"
"system, you should use this option. However, depending on your partitioning\n"
"scheme, you can prevent some of your existing data from being over-written.\n"
"\n"
" * \"%s\": this installation class allows you to update the packages\n"
"currently installed on your Mandrake Linux system. Your current\n"
"partitioning scheme and user data is not altered. Most of other\n"
"configuration steps remain available, similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:605
#, c-format
msgid ""
"Depending on the language you chose in section , DrakX will automatically\n"
"select a particular type of keyboard configuration. Check that the\n"
"selection suits you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard that corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be presented with the complete list of\n"
"supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding that will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""

#: help.pm:624
#, c-format
msgid ""
"Your choice of preferred language will affect the language of the\n"
"documentation, the installer and the system in general. Select first the\n"
"region you are located in, and then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if you will\n"
"host users from Spain on your machine, select English as the default\n"
"language in the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. Though full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrake Linux will be using it\n"
"or not depending on the user choices:\n"
"\n"
" * If you choose a languages with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for the system at user request by\n"
"selecting option \"%s\" independently of which language(s) have been\n"
"chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several ones, or even install them all by selecting the \"%s\"\n"
"box. Selecting support for a language means translations, fonts, spell\n"
"checkers, etc. for that language will also be installed.\n"
"\n"
"To switch between the various languages installed on the system, you can\n"
"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
"language used by the entire system. Running the command as a regular user\n"
"will only change the language settings for that particular user."
msgstr ""

#: help.pm:660
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:663
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n"
"that says \"%s\". DrakX will then configure your mouse so that you can\n"
"simulate the wheel with it: to do so, press the middle button and move your\n"
"mouse up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"If you choose a mouse other than the default, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and to\n"
"go back to the list of choices.\n"
"\n"
"Wheel mice are occasionally not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
"buttons and check that the mouse pointer moves on-screen as you move your\n"
"mouse."
msgstr ""

#: help.pm:691
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "3 hnappar með skrunhermi"

#: help.pm:694
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Veldu tengið sem þú vilt nota.  Tengið COM1 í MS Windows er kallað\n"
"ttyS0 í GNU/Linux, COM2 er ttyS1, o.s.frv."

#: help.pm:698
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you have to enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That is why you must choose a password that is difficult to\n"
"guess - DrakX will tell you if the password you chose is too easy. As you\n"
"can see, you are not forced to enter a password, but we strongly advise you\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise a system.\n"
"\n"
"One caveat -- do not make the password too long or complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it in. To reduce\n"
"the chance of a blind typing error you will need to enter the password\n"
"twice. If you do happen to make the same typing error twice, this\n"
"``incorrect'' password will be the one you will have use the first time you\n"
"connect.\n"
"\n"
"If you wish access to this computer to be controlled by an authentication\n"
"server, click the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, if your computer\n"
"will never be connected to the Internet and you absolutely trust everybody\n"
"who uses your computer, you can choose to have \"%s\"."
msgstr ""

#: help.pm:733
#, c-format
msgid "authentication"
msgstr "auðkenning"

#. -PO: keep this short or else the buttons will not fit in the window
#: help.pm:733 install_steps_interactive.pm:1154
#, c-format
msgid "No password"
msgstr "Ekkert lykilorð"

#: help.pm:736
#, c-format
msgid ""
"This dialog allows you to fine tune your bootloader:\n"
"\n"
" * \"%s\": there are three choices for your bootloader:\n"
"\n"
"    * \"%s\": if you prefer GRUB (text menu).\n"
"\n"
"    * \"%s\": if you prefer LILO with its text menu interface.\n"
"\n"
"    * \"%s\": if you prefer LILO with its graphical interface.\n"
"\n"
" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
"you prefer, the bootloader can be installed on the second hard drive\n"
"(\"%s\"), or even on a floppy disk (\"%s\");\n"
"\n"
" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
"given to the user at the console to select a boot entry other than the\n"
"default.\n"
"\n"
" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
"management, notably for laptops. If you know your hardware supports it and\n"
"you need it, check this box.\n"
"\n"
" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n"
"instabilities, machine freeze, ...) you should try disabling APIC by\n"
"checking this box.\n"
"\n"
"!! Be aware that if you choose not to install a bootloader (by selecting\n"
"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
"system! Be sure you know what you are doing before changing any of the\n"
"options. !!\n"
"\n"
"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
"are normally reserved for the expert user."
msgstr ""

#: help.pm:768
#, c-format
msgid "GRUB"
msgstr "GRUB"

#: help.pm:768
#, c-format
msgid "/dev/hda"
msgstr "/dev/hda"

#: help.pm:768
#, c-format
msgid "/dev/hdb"
msgstr "/dev/hdb"

#: help.pm:768
#, c-format
msgid "/dev/fd0"
msgstr "/dev/fd0"

#: help.pm:768
#, c-format
msgid "Delay before booting the default image"
msgstr "Töf áður en sjálfgefin ræsing byrjar"

#: help.pm:768
#, fuzzy, c-format
msgid "Force no APIC"
msgstr "Þvinga engan APIC"

#: help.pm:771
#, c-format
msgid ""
"After you have configured the general bootloader parameters, the list of\n"
"boot options that will be available at boot time will be displayed.\n"
"\n"
"If there are other operating systems installed on your machine they will\n"
"automatically be added to the boot menu. You can fine-tune the existing\n"
"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
"changes.\n"
"\n"
"You may also not want to give access to these other operating systems to\n"
"anyone who goes to the console and reboots the machine. You can delete the\n"
"corresponding entries for the operating systems to remove them from the\n"
"bootloader menu, but you will need a boot disk in order to boot those other\n"
"operating systems!"
msgstr ""

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakbackup:1843 standalone/drakfont:586 standalone/drakfont:649
#: standalone/drakvpn:329 standalone/drakvpn:690
#, c-format
msgid "Add"
msgstr "Bæta við"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#, c-format
msgid "Modify"
msgstr "Breyta"

#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#: standalone/drakvpn:329 standalone/drakvpn:690
#, c-format
msgid "Remove"
msgstr "Fjarlægja"

#: help.pm:787
#, c-format
msgid ""
"LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
"automated. DrakX will analyze the disk boot sector and act according to\n"
"what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you will be able to load either GNU/Linux or any\n"
"other OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
"one.\n"
"\n"
"If it cannot make a determination, DrakX will ask you where to place the\n"
"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
"won't install any bootloader. Use it only if you know what you are doing."
msgstr ""

#: help.pm:803
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other OSs may\n"
"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
"is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
"experience with GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
"printing to your local printer or to one halfway around the planet. It is\n"
"simple to configure and can act as a server or a client for the ancient\n"
"\"lpd \" printing system, so it is compatible with older operating systems\n"
"which may still need print services. While quite powerful, the basic setup\n"
"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
"front-ends for printing or choosing printer options and for managing the\n"
"printer.\n"
"\n"
"If you make a choice now, and later find that you don't like your printing\n"
"system you may change it by running PrinterDrake from the Mandrake Control\n"
"Center and clicking the expert button."
msgstr ""

#: help.pm:826
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:826 printer/cups.pm:99 printer/data.pm:82
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:829
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""

#: help.pm:847
#, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
"alternate kernels, or for an emergency boot image.\n"
"\n"
"For other OSs, the entry consists only of a label and the \"root\"\n"
"partition.\n"
"\n"
"For Linux, there are a few possible options:\n"
"\n"
" * Label: this is the name you will have to type at the yaboot prompt to\n"
"select this boot option.\n"
"\n"
" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
"variation of vmlinux with an extension.\n"
"\n"
" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
"\n"
" * Append: on Apple hardware, the kernel append option is often used to\n"
"assist in initializing video hardware, or to enable keyboard mouse button\n"
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
"   \t      video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
"   \t      video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
"boot situation.\n"
"\n"
" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
"need to allocate a large ramdisk, this option can be used to specify a\n"
"ramdisk larger than the default.\n"
"\n"
" * Read-write: normally the \"root\" partition is initially mounted as\n"
"read-only, to allow a file system check before the system becomes ``live''.\n"
"You can override the default with this option.\n"
"\n"
" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
"problematic, you can select this option to boot in ``novideo'' mode, with\n"
"native frame buffer support.\n"
"\n"
" * Default: selects this entry as being the default Linux selection,\n"
"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""

#: help.pm:894
#, c-format
msgid ""
"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
"detected and installed in the bootloader menu. If this is not the case, you\n"
"can add an entry by hand in this screen. Take care to choose the correct\n"
"parameters.\n"
"\n"
"Yaboot's main options are:\n"
"\n"
" * Init Message: a simple text message displayed before the boot prompt.\n"
"\n"
" * Boot Device: indicates where you want to place the information required\n"
"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
"to hold this information.\n"
"\n"
" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
"yaboot. The first delay is measured in seconds and at this point, you can\n"
"choose between CD, OF boot, MacOS or Linux;\n"
"\n"
" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
"After selecting Linux, you will have this delay in 0.1 second increments\n"
"before your default kernel description is selected;\n"
"\n"
" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
"at the first boot prompt.\n"
"\n"
" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
"Open Firmware at the first boot prompt.\n"
"\n"
" * Default OS: you can select which OS will boot by default when the Open\n"
"Firmware Delay expires."
msgstr ""

#: help.pm:926
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
"If you notice the sound card displayed is not the one that is actually\n"
"present on your system, you can click on the button and choose another\n"
"driver."
msgstr ""

#: help.pm:929 help.pm:991 install_steps_interactive.pm:962
#: install_steps_interactive.pm:979
#, c-format
msgid "Sound card"
msgstr "Hljóðkort"

#: help.pm:932
#, fuzzy, c-format
msgid ""
"As a review, DrakX will present a summary of information it has about your\n"
"system. Depending on your installed hardware, you may have some or all of\n"
"the following entries. Each entry is made up of the configuration item to\n"
"be configured, followed by a quick summary of the current configuration.\n"
"Click on the corresponding \"%s\" button to change that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your country\n"
"is not in the first list shown, click the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button to\n"
"change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is displayed\n"
"here. If you notice the sound card displayed is not the one that is\n"
"actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
"configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
"here. You can click on \"%s\" to change the parameters associated with the\n"
"card.\n"
"\n"
" * \"%s\": If you wish to configure your Internet or local network access\n"
"now.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click that\n"
"button. This should be reserved to advanced users.\n"
"\n"
" * \"%s\": here you'll be able to fine control which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
"As a review, DrakX will present a summary of various information it has\n"
"about your system. Depending on your installed hardware, you may have some\n"
"or all of the following entries. Each entry is made up of the configuration\n"
"item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to change\n"
"that.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change\n"
"that if necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you are not in this\n"
"country, click on the \"%s\" button and choose another one. If your\n"
"country is not in the first list shown, click the \"%s\" button to get\n"
"the complete country list.\n"
"\n"
" * \"%s\": By default, DrakX deduces your time zone based on the\n"
"country you have chosen. You can click on the \"%s\" button here if\n"
"this is not correct.\n"
"\n"
" * \"%s\": check the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to setup a new printer. The interface\n"
"presented there is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it is\n"
"displayed here. If you notice the sound card displayed is not the one that\n"
"is actually present on your system, you can click on the button and choose\n"
"another driver.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical\n"
"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
"you, click on \"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if a TV card is detected on your system, it is displayed\n"
"here. If you have a TV card and it is not detected, click on \"%s\"\n"
"to try to configure it manually.\n"
"\n"
" * \"%s\": if an ISDN card is detected on your system, it will be\n"
"displayed here. You can click on \"%s\" to change the parameters\n"
"associated with the card.\n"
"\n"
" * \"%s\": Ef þú vilt stilla Internet eða aðrar nettengingar núna.\n"
"\n"
" * \"%s\": hér getur þú endurstillt öryggisþrep sem þú settir áður\n"
"í fyrra þrepi ().\n"
"\n"
" * \"%s\": ef þú ætlar að tengja vélina þína Internetinu, þá er\n"
"góð hugmynd að vernda vélina þína með því að setja upp eldvvegg.\n"
"Lestu viðeigandi kafla í um uppsetningu eldveggs í ``Starter Guide''.\n"
"\n"
" * \"%s\": ef þú villt breyta stillingum ræsistjóra, smelltu á\n"
"þennan hnapp. Þetta ætti þó ekki að gera nema af kunnugum.\n"
"\n"
" * \"%s\": hér getur þú fínstillt hvaða þjónustur verða ræstar á\n"
"tölvunni þinni. Ef þú ætlar að nota þessa vél sem miðlara þá er góð\n"
"hugmynd að fara vel yfir þessa uppsetningu."

#: help.pm:991 install_steps_interactive.pm:110
#: install_steps_interactive.pm:899 standalone/keyboarddrake:23
#, c-format
msgid "Keyboard"
msgstr "Lyklaborð"

#: help.pm:991 install_steps_interactive.pm:921
#, c-format
msgid "Timezone"
msgstr "Tímabelti"

#: help.pm:991
#, c-format
msgid "Graphical Interface"
msgstr "Grafískt viðmót"

#: help.pm:991 install_steps_interactive.pm:995
#, c-format
msgid "TV card"
msgstr "Sjónvarpskort"

#: help.pm:991
#, c-format
msgid "ISDN card"
msgstr "ISDN spjald"

#: help.pm:991 install_steps_interactive.pm:1013 standalone/drakbackup:2394
#, c-format
msgid "Network"
msgstr "Net"

#: help.pm:991 install_steps_interactive.pm:1039
#, c-format
msgid "Security Level"
msgstr "Öryggisþrep"

#: help.pm:991 install_steps_interactive.pm:1053
#, c-format
msgid "Firewall"
msgstr "Eldveggur"

#: help.pm:991 install_steps_interactive.pm:1067
#, c-format
msgid "Bootloader"
msgstr "Ræsistjóri"

#: help.pm:991 install_steps_interactive.pm:1077 services.pm:195
#, c-format
msgid "Services"
msgstr "Þjónustur"

#: help.pm:994
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrake Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"Veldu harða diskinn sem þú vilt hreinsa allt af til að setja upp nýja\n"
"Mandrake Linux disksneið.  Varúð, öllum gögnum á disknum verður\n"
"eytt, og það er ekki hægt að sækja þau aftur!"

#: help.pm:999
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"Smelltu á \"%s\" ef þú vilt eyða öllum gögnum og disksneiðum\n"
"á þesum harða disk.  Varúð! Eftir að þú hefur smellt á \"%s\", getur\n"
"þú ekki endurheimt nein gögn eða disksneiðar sem eru nú á þessum diski,\n"
"Þar með talin Windows gögn.\n"
"\n"
"Smelltu á \"%s\" til að stöðva þessa aðgerð án þess að tapa gögnum\n"
"og disksneiðum sem nú eru á þessum harða diski."

#: install2.pm:119
#, c-format
msgid ""
"Can't access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""

#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr "Þú verður einnig að forsníða %s"

#: install_any.pm:413
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They don't have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""

#: install_any.pm:434
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"Eftrfarandi pakkar verða fjarlægðir til að uppfærsla takist eðlilega: %s\n"
"\n"
"\n"
"Viltu í alvöru fjarlægja þessa pakka?\n"

#: install_any.pm:812
#, c-format
msgid "Insert a FAT formatted floppy in drive %s"
msgstr "Settu tóman FAT forsniðinn diskling í drif %s"

#: install_any.pm:816
#, c-format
msgid "This floppy is not FAT formatted"
msgstr "Þessi disklingur er ekki FAT forsniðinn"

#: install_any.pm:828
#, c-format
msgid ""
"To use this saved packages selection, boot installation with ``linux "
"defcfg=floppy''"
msgstr ""

#: install_any.pm:856 partition_table.pm:845
#, c-format
msgid "Error reading file %s"
msgstr "Villa við lestur úr skránni %s"

#: install_any.pm:973
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"Það kom upp villa. Engin tæki fundust sem unnt er að búa til ný skráakerfi "
"á. Vinsamlegast athugaðu vélbúnaðinn í leit að orsök vandamálsins."

#: install_gtk.pm:161
#, c-format
msgid "System installation"
msgstr "Kerfisuppsetning"

#: install_gtk.pm:164
#, c-format
msgid "System configuration"
msgstr "Kerfisstillingar"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"Þú verður að hafa rótarsneið fyrir Linux.  Búðu því annaðhvort\n"
"til rótarsneið eða veldu sneið sem nú þegar er til á disknum.\n"
"Veldu síðan ``Tengipunktur'' og sláðu inn `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You don't have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"Þú hefur enga diskminnis-sneið\n"
"\n"
"Halda samt áfram?"

#: install_interactive.pm:70 install_steps.pm:206
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "Þú verður að hafa FAT disksneið tengda í /boot/efi"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "Ekki nóg laust pláss til að búa til nýjar disksneiðar"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "Nota núverandi disksneiðar"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "það eru engar núverandi disksneiðar til að nota"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr ""

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "Hvaða disksneið vilt þú nota fyrir Linux4Win?"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "Veldu stærðir"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "Stærð rótardisksneiðar í MB: "

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "Stærð diskminnis í MB: "

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr ""

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "Hvaða disksneið viltu breyta stærð á?"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occured: %s"
msgstr ""

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "Reikna stærð Windows disksneiðar"

#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
"installation."
msgstr ""

#: install_interactive.pm:164
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"AÐVÖRUN\n"
"\n"
"DrakX ætlar nú að breyta stærð Windows sneiðarinnar. Athugið:\n"
"Þetta getur verið hættulegt. Ef þú ert ekki búin(n) að því, þá ættir þú "
"fyrst að\n"
"hætta við uppsetninguna, keyra \"chkdsk c:\" frá skipanalínunni (DOS)\n"
"(Varúð: það er ekki nóg að keyra grafíska forritið \"scandisk\", verið \n"
"viss um að nota \"chkdisk\" úr skipanalínunni!),\n"
"Þið gætuð einnig keyrt defrag.  Endurræsið síðan uppsetninguna\n"
"Þú ættir einnig að taka afrit af gögnunum þínum.\n"
"Þegar þú ert viss, sláðu á \"Í lagi\" til að halda áfram."

#: install_interactive.pm:176
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "Hvaða stærð viltu skilja eftir fyrir Windows á"

#: install_interactive.pm:177
#, c-format
msgid "partition %s"
msgstr "disksneið %s"

#: install_interactive.pm:186
#, c-format
msgid "Resizing Windows partition"
msgstr "Breyta stærð Windows skráarkerfis"

#      ******************************************
#      *****   Byrjaði hérna 4. jan 2000  *******
#      ***  ATH: Það er sumt eftir fyrir ofan ***
#      ******************************************
#: install_interactive.pm:191
#, c-format
msgid "FAT resizing failed: %s"
msgstr "Breyting á FAT mistókst: %s"

#: install_interactive.pm:206
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr ""

#: install_interactive.pm:211
#, c-format
msgid "Remove Windows(TM)"
msgstr "Fjarlægja Windows(TM)"

#: install_interactive.pm:213
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "Þú hefur meir en einn harðan disk. Hvar viltu setja upp Linux?"

#: install_interactive.pm:217
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "Allar disksneiðar og öll gögn á diski %s  tapast"

#: install_interactive.pm:230
#, c-format
msgid "Use fdisk"
msgstr "Nota fdisk"

#: install_interactive.pm:233
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, don't forget to save using `w'"
msgstr ""

#: install_interactive.pm:269
#, c-format
msgid "I can't find any room for installing"
msgstr "Get ekki fundið meira pláss fyrir uppsetningu"

#: install_interactive.pm:273
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr ""

#: install_interactive.pm:279
#, c-format
msgid "Partitioning failed: %s"
msgstr "Skipting disks í sneiðar mistókst: %s"

#: install_interactive.pm:286
#, c-format
msgid "Bringing up the network"
msgstr "Keyri upp netið"

#: install_interactive.pm:291
#, c-format
msgid "Bringing down the network"
msgstr "Keyri niður netið"

#: install_messages.pm:9
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrake "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandrake Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and  \n"
"MandrakeSoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
"law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or "
"inability to use the Software \n"
"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
"in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of  "
"downloading software components \n"
"from one of Mandrake Linux sites  which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to MandrakeSoft.\n"
"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
"Documentation written \n"
"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
"Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
"MandrakeSoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact MandrakeSoft S.A.  \n"
msgstr ""

#: install_messages.pm:89
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#: install_messages.pm:96
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""

#: install_messages.pm:128
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrake "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
"Til hamingju! Innsetningu er lokið.\n"
"Taktu disklinginn eða geisladiskinn úr drifinu og sláðu á ENTER.\n"
"\n"
"\n"
"viðbætur og/eða lagfæringar á göllum sem gætu verið til\n"
"staðar í þessari útgáfu af Mandrake Linux má finna á \n"
"\n"
"\n"
"%s \n"
"\n"
"Frekari upplýsingar um hvernig á að stilla vélina eftir innsetninguna er að\n"
"finna í viðeigandi kafla í Official Mandrake Linux User's Guide bókinni."

#: install_messages.pm:141
#, c-format
msgid "http://www.mandrakelinux.com/en/100errata.php3"
msgstr "http://www.mandrakelinux.com/en/100errata.php3"

#: install_steps.pm:241
#, c-format
msgid "Duplicate mount point %s"
msgstr "%s tengipunktur er nú þegar til"

#: install_steps.pm:410
#, c-format
msgid ""
"Some important packages didn't get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
"\"\n"
msgstr ""
"Sumir mikilvægir pakkar voru ekki uppsettir eðlilega.\n"
"Annaðhvort er geisladiskurinn eða drifið skemmt.\n"
"Athugaðu geisladiskinn á uppsettri vél með skipuninni\n"
"\"rpm -qpl Mandrake/RPMS/*.rpm\"\n"

#: install_steps.pm:541
#, c-format
msgid "No floppy drive available"
msgstr "Ekkert disklingadrif aðgengilegt"

#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "Hef skref `%s'\n"

#: install_steps_gtk.pm:178
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrake Linux. If that occurs, you can try a text install instead. For "
"this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""

#: install_steps_gtk.pm:232 install_steps_interactive.pm:587
#, c-format
msgid "Package Group Selection"
msgstr "Val á pakkahóp"

#: install_steps_gtk.pm:292 install_steps_interactive.pm:519
#, c-format
msgid "Total size: %d / %d MB"
msgstr "Heildarstærð: %d / %d MB"

#: install_steps_gtk.pm:338
#, c-format
msgid "Bad package"
msgstr "Skemmdur pakki"

#: install_steps_gtk.pm:340
#, c-format
msgid "Version: "
msgstr "Útgáfa: "

#: install_steps_gtk.pm:341
#, c-format
msgid "Size: "
msgstr "Stærð: "

#: install_steps_gtk.pm:341
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:342
#, c-format
msgid "Importance: "
msgstr "Mikilvægi: "

#: install_steps_gtk.pm:375
#, c-format
msgid "You can't select/unselect this package"
msgstr "Þú getur ekki vali/afvalið þennan pakka"

#: install_steps_gtk.pm:379
#, fuzzy, c-format
msgid "due to missing %s"
msgstr "kdesu vantar"

#: install_steps_gtk.pm:380
#, c-format
msgid "due to unsatisfied %s"
msgstr ""

#: install_steps_gtk.pm:381
#, c-format
msgid "trying to promote %s"
msgstr ""

#: install_steps_gtk.pm:382
#, c-format
msgid "in order to keep %s"
msgstr ""

#: install_steps_gtk.pm:387
#, c-format
msgid ""
"You can't select this package as there is not enough space left to install it"
msgstr "Þú getur ekki valið þennan pakka því það er ekki nægilegt pláss"

#: install_steps_gtk.pm:390
#, c-format
msgid "The following packages are going to be installed"
msgstr "Eftirfarandi pakkar verða settir inn"

#: install_steps_gtk.pm:391
#, c-format
msgid "The following packages are going to be removed"
msgstr "Eftirfarandi pakkar verða fjarlægðir"

#: install_steps_gtk.pm:415
#, c-format
msgid "This is a mandatory package, it can't be unselected"
msgstr "Þessi pakki verður að vera uppsettur, þú getur ekki afvalið hann"

#: install_steps_gtk.pm:417
#, c-format
msgid "You can't unselect this package. It is already installed"
msgstr "Þú getur ekki afvalið þennan pakka hann er þegar uppsettur"

#: install_steps_gtk.pm:420
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"það verður að uppfæra þennan pakka\n"
"Ertu viss um að þú viljir afvelja hann?"

#: install_steps_gtk.pm:423
#, c-format
msgid "You can't unselect this package. It must be upgraded"
msgstr "Þú getur ekki afvalið þennan pakka, það verður að uppfæra hann"

#: install_steps_gtk.pm:428
#, c-format
msgid "Show automatically selected packages"
msgstr "Sýna sjálfvirkt valda pakka"

#: install_steps_gtk.pm:433
#, c-format
msgid "Load/Save on floppy"
msgstr "Hlaða/Vista á diskling"

#: install_steps_gtk.pm:434
#, c-format
msgid "Updating package selection"
msgstr "Uppfæri val á pökkum"

#: install_steps_gtk.pm:439
#, c-format
msgid "Minimal install"
msgstr "Minimal uppsetning"

#: install_steps_gtk.pm:453 install_steps_interactive.pm:427
#, c-format
msgid "Choose the packages you want to install"
msgstr "Veldu pakkana sem þú vilt setja inn"

#: install_steps_gtk.pm:469 install_steps_interactive.pm:673
#, c-format
msgid "Installing"
msgstr "Set inn"

#: install_steps_gtk.pm:475
#, c-format
msgid "No details"
msgstr "Engar upplýsingar"

#: install_steps_gtk.pm:476
#, c-format
msgid "Estimating"
msgstr "Áætla"

#: install_steps_gtk.pm:482
#, c-format
msgid "Time remaining "
msgstr "Tími eftir "

#: install_steps_gtk.pm:494
#, c-format
msgid "Please wait, preparing installation..."
msgstr "Augnablik, undirbý innsetningu..."

#: install_steps_gtk.pm:555
#, c-format
msgid "%d packages"
msgstr "%d pakkar"

#: install_steps_gtk.pm:560
#, c-format
msgid "Installing package %s"
msgstr "Set inn pakka %s"

#: install_steps_gtk.pm:596 install_steps_interactive.pm:88
#: install_steps_interactive.pm:697
#, c-format
msgid "Refuse"
msgstr "Neita"

#: install_steps_gtk.pm:597 install_steps_interactive.pm:698
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done.\n"
"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""

#: install_steps_gtk.pm:612 install_steps_interactive.pm:710
#, c-format
msgid "There was an error ordering packages:"
msgstr "Það kom upp villa við að raða pökkum:"

#: install_steps_gtk.pm:612 install_steps_gtk.pm:616
#: install_steps_interactive.pm:710 install_steps_interactive.pm:714
#, c-format
msgid "Go on anyway?"
msgstr "Viltu samt halda áfram?"

#: install_steps_gtk.pm:616 install_steps_interactive.pm:714
#, c-format
msgid "There was an error installing packages:"
msgstr "Það kom upp villa við innsetningu pakka:"

#: install_steps_gtk.pm:656 install_steps_interactive.pm:881
#: install_steps_interactive.pm:1029
#, c-format
msgid "not configured"
msgstr "Ekki stillt"

#: install_steps_interactive.pm:81
#, c-format
msgid "Do you want to recover your system?"
msgstr "Viltu endurbyggja kerfið þitt?"

#: install_steps_interactive.pm:82
#, c-format
msgid "License agreement"
msgstr "Notkunarskilmálar"

#: install_steps_interactive.pm:111
#, c-format
msgid "Please choose your keyboard layout."
msgstr "Hvaða lyklaborðsuppsetningu viltu?"

#: install_steps_interactive.pm:113
#, c-format
msgid "Here is the full list of keyboards available"
msgstr "Hér er listi af mögulegum lyklaborðsuppsetningum"

#: install_steps_interactive.pm:143
#, c-format
msgid "Install/Upgrade"
msgstr "Innsetning/Uppfærsla"

#: install_steps_interactive.pm:144
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "Er þetta innsetning eða uppfærsla?"

#: install_steps_interactive.pm:150
#, c-format
msgid "Upgrade %s"
msgstr "Uppfæra %s"

#: install_steps_interactive.pm:160
#, c-format
msgid "Encryption key for %s"
msgstr "Dulritunarlykill fyrir %s"

#: install_steps_interactive.pm:177
#, c-format
msgid "Please choose your type of mouse."
msgstr "Hvernig mús ertu með?"

#: install_steps_interactive.pm:186 standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "Músartengi"

#: install_steps_interactive.pm:187 standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "Við hvaða raðtengi er músin þín tengd?"

#: install_steps_interactive.pm:197
#, c-format
msgid "Buttons emulation"
msgstr "Hnappahermir"

#: install_steps_interactive.pm:199
#, c-format
msgid "Button 2 Emulation"
msgstr "Tveggja hnappa hermir"

#: install_steps_interactive.pm:200
#, c-format
msgid "Button 3 Emulation"
msgstr "Herma eftir miðhnappi"

#: install_steps_interactive.pm:221
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:221
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "Stilli PCMCIA kort..."

#: install_steps_interactive.pm:228
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:228
#, c-format
msgid "Configuring IDE"
msgstr "Uppsetning IDE"

#: install_steps_interactive.pm:248 network/tools.pm:197
#, c-format
msgid "No partition available"
msgstr "Engin tiltæk disksneið"

#: install_steps_interactive.pm:251
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "Leita á disksneiðum að tengipunktum"

#: install_steps_interactive.pm:258
#, c-format
msgid "Choose the mount points"
msgstr "Veldu tengipunktana"

#: install_steps_interactive.pm:288
#, c-format
msgid ""
"No free space for 1MB bootstrap! Install will continue, but to boot your "
"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""

#: install_steps_interactive.pm:325
#, c-format
msgid "Choose the partitions you want to format"
msgstr "Veldu þær disksneiðar sem á að forsníða"

#: install_steps_interactive.pm:327
#, c-format
msgid "Check bad blocks?"
msgstr "Athuga skemmdar blokkir?"

#: install_steps_interactive.pm:359
#, c-format
msgid ""
"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
"you can lose data)"
msgstr ""

#: install_steps_interactive.pm:362
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "Ekki nægjanlegt diskminni fyrir innsetningu.  Bættu við það"

#: install_steps_interactive.pm:369
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "Leita að fáanlegum pökkum og endurbyggi rpm gagnagrunn..."

#: install_steps_interactive.pm:370 install_steps_interactive.pm:389
#, c-format
msgid "Looking for available packages..."
msgstr "Leita að fáanlegum pökkum..."

#: install_steps_interactive.pm:373
#, c-format
msgid "Looking at packages already installed..."
msgstr "Leita að þegar uppsettum pökkum"

#: install_steps_interactive.pm:377
#, c-format
msgid "Finding packages to upgrade..."
msgstr "Leita að pökkum til að uppfæra..."

#: install_steps_interactive.pm:398
#, c-format
msgid ""
"Your system does not have enough space left for installation or upgrade (%d "
"> %d)"
msgstr ""
"Það er ekki nægilegt pláss á kerfinu þínu fyrir uppsetningu eða uppfærslu (%"
"d > %d)"

#: install_steps_interactive.pm:439
#, c-format
msgid ""
"Please choose load or save package selection on floppy.\n"
"The format is the same as auto_install generated floppies."
msgstr ""

#: install_steps_interactive.pm:441
#, c-format
msgid "Load from floppy"
msgstr "Hlaða frá diskling"

#: install_steps_interactive.pm:441
#, c-format
msgid "Save on floppy"
msgstr "Vista á diskling"

#: install_steps_interactive.pm:445
#, c-format
msgid "Package selection"
msgstr "Val á pökkum"

#: install_steps_interactive.pm:445
#, c-format
msgid "Loading from floppy"
msgstr "Hleð inn frá diskling"

#: install_steps_interactive.pm:450
#, c-format
msgid "Insert a floppy containing package selection"
msgstr "Settu inn diskling sem inniheldur pakkaval"

#: install_steps_interactive.pm:533
#, c-format
msgid ""
"Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
"tests, the 2.4 series kernel will be installed as the default to insure\n"
"compliance under the \"LSB\" group selection."
msgstr ""

#: install_steps_interactive.pm:540
#, c-format
msgid "Selected size is larger than available space"
msgstr "Valin stærð er stærri en tiltækt pláss"

#: install_steps_interactive.pm:555
#, c-format
msgid "Type of install"
msgstr "Tegund uppsetningar"

#: install_steps_interactive.pm:556
#, c-format
msgid ""
"You haven't selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"Þú hefur ekki valið neina pakkahópa.\n"
"Veldu lágmarksuppsetningu sem þú vilt:"

#: install_steps_interactive.pm:560
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "Með grunn handbókum (mælt með!)"

#: install_steps_interactive.pm:561
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "Alger lágmarksuppsetning (ekkert urpmi)"

#: install_steps_interactive.pm:604 standalone/drakxtv:53
#, c-format
msgid "All"
msgstr "Allt"

#: install_steps_interactive.pm:648
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"Ef þú hefur alla geisladiskana í listanum hér að neðan smelltu þá á 'Í "
"lagi'\n"
"Ef þú hefur engan þessara geisladiska smelltu þá á 'Hætta'\n"
"Ef einhverja diska vantar, afveldu þá og smelltu síðan á 'Í lagi'"

#: install_steps_interactive.pm:653
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "Cd-ROM merkt \"%s\""

#: install_steps_interactive.pm:673
#, c-format
msgid "Preparing installation"
msgstr "Undirbý innsetningu"

#: install_steps_interactive.pm:682
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"Set inn pakka %s\n"
"%d%%"

#: install_steps_interactive.pm:728
#, c-format
msgid "Post-install configuration"
msgstr "Lokauppsetning"

#: install_steps_interactive.pm:734
#, c-format
msgid "Please insert the Boot floppy used in drive %s"
msgstr "Settu ræsidiskling í drif %s"

#: install_steps_interactive.pm:740
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "Settu uppfærslu-diskling í drif %s"

#: install_steps_interactive.pm:761
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates ?"
msgstr ""
"Þú hefur nú möguleika á að sækja uppfærða pakka.  Þessir pakkar\n"
"hafa verið uppfærðir eftir að dreifingin ver send úr húsi.  Þeir kunna\n"
"að innihalda villuleiðréttingar eða öryggisuppfærslur.\n"
"\n"
"Til að sækja þessa pakka þá verður þú að vera tengdur Internetinu.\n"
"\n"
"Viltu sækja uppfærslurnar?"

#: install_steps_interactive.pm:782
#, c-format
msgid ""
"Contacting Mandrake Linux web site to get the list of available mirrors..."
msgstr ""
"Hef samband við Mandrake Linux vefinn til að sækja lista yfir fáanlega "
"spegla..."

#: install_steps_interactive.pm:786
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "Veldu spegilvélina þaðan sem á að sækja pakkanna"

#: install_steps_interactive.pm:800
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "Hef samband við vélina til að sækja lista yfir fáanlega pakka"

#: install_steps_interactive.pm:804
#, c-format
msgid "Unable to contact mirror %s"
msgstr "Get ekki tengst spegilvél %s"

#: install_steps_interactive.pm:804
#, c-format
msgid "Would you like to try again?"
msgstr "Viltu reyna aftur?"

#: install_steps_interactive.pm:830 standalone/drakclock:42
#, c-format
msgid "Which is your timezone?"
msgstr "Hvert er þitt tímabelti?"

#: install_steps_interactive.pm:835
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "Sjálfvirk tímastilling (með NTP)"

#: install_steps_interactive.pm:843
#, c-format
msgid "NTP Server"
msgstr "NTP þjónn"

#: install_steps_interactive.pm:885 steps.pm:30
#, c-format
msgid "Summary"
msgstr "Yfirlit"

#: install_steps_interactive.pm:898 install_steps_interactive.pm:906
#: install_steps_interactive.pm:920 install_steps_interactive.pm:927
#: install_steps_interactive.pm:1076 services.pm:135
#: standalone/drakbackup:1937
#, c-format
msgid "System"
msgstr "Kerfi"

#: install_steps_interactive.pm:934 install_steps_interactive.pm:961
#: install_steps_interactive.pm:978 install_steps_interactive.pm:994
#: install_steps_interactive.pm:1005
#, c-format
msgid "Hardware"
msgstr "Vélbúnaður"

#: install_steps_interactive.pm:940 install_steps_interactive.pm:949
#, c-format
msgid "Remote CUPS server"
msgstr "Fjarlægur CUPS þjónn"

#: install_steps_interactive.pm:940
#, c-format
msgid "No printer"
msgstr "Enginn prentari"

#: install_steps_interactive.pm:982
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "Er kannski ISA hhljóðkort í vélinni?"

#: install_steps_interactive.pm:984
#, c-format
msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr "Keyrðu \"sndconfig\" eftir uppsetningu til að stilla hljóðkortið þitt"

#: install_steps_interactive.pm:986
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
"Ekkert hljóðkort fannst reyndu að keyra \"harddrake\" eftir uppsetningu"

#: install_steps_interactive.pm:1006
#, c-format
msgid "Graphical interface"
msgstr "Grafískt viðmót"

#: install_steps_interactive.pm:1012 install_steps_interactive.pm:1027
#, c-format
msgid "Network & Internet"
msgstr "Staðarnet og Internet"

#: install_steps_interactive.pm:1028
#, fuzzy, c-format
msgid "Proxies"
msgstr "Snið "

#: install_steps_interactive.pm:1029
#, fuzzy, c-format
msgid "configured"
msgstr "endurstilla"

#: install_steps_interactive.pm:1038 install_steps_interactive.pm:1052
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "Öryggi"

#: install_steps_interactive.pm:1057
#, c-format
msgid "activated"
msgstr "Virk"

#: install_steps_interactive.pm:1057
#, c-format
msgid "disabled"
msgstr "óvirkt"

#: install_steps_interactive.pm:1066
#, c-format
msgid "Boot"
msgstr "Ræsing"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1070
#, c-format
msgid "%s on %s"
msgstr "%s á %s"

#: install_steps_interactive.pm:1081 services.pm:177
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "Þjónustur: %d ræstar af %d skráðum"

#: install_steps_interactive.pm:1091
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "Þú hefur ekki sett upp X, ertu viss um að þú viljir þetta?"

#: install_steps_interactive.pm:1149
#, c-format
msgid "Set root password and network authentication methods"
msgstr ""

#: install_steps_interactive.pm:1150
#, c-format
msgid "Set root password"
msgstr "Ákveða rótarlykilorð"

#: install_steps_interactive.pm:1160
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Þetta lykilorð er of einfalt (verður að vera minnst %d stafa langt)"

#: install_steps_interactive.pm:1165 network/netconnect.pm:492
#: standalone/drakauth:26 standalone/drakconnect:428
#: standalone/drakconnect:917
#, c-format
msgid "Authentication"
msgstr "Auðkenning"

#: install_steps_interactive.pm:1196
#, c-format
msgid "Preparing bootloader..."
msgstr "Set upp ræsistjórann..."

#: install_steps_interactive.pm:1206
#, c-format
msgid ""
"You appear to have an OldWorld or Unknown\n"
" machine, the yaboot bootloader will not work for you.\n"
"The install will continue, but you'll\n"
" need to use BootX or some other means to boot your machine"
msgstr ""

#: install_steps_interactive.pm:1212
#, c-format
msgid "Do you want to use aboot?"
msgstr "Viltu nota aboot?"

#: install_steps_interactive.pm:1215
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""

#: install_steps_interactive.pm:1226
#, c-format
msgid "Installing bootloader"
msgstr "Setja inn ræsistjórann"

#: install_steps_interactive.pm:1233
#, c-format
msgid "Installation of bootloader failed. The following error occured:"
msgstr "Innsetning ræsiforrits brást sökum eftirfarandi villu:"

#: install_steps_interactive.pm:1238
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you don't see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""

#: install_steps_interactive.pm:1251
#, c-format
msgid ""
"In this security level, access to the files in the Windows partition is "
"restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1283 standalone/drakautoinst:75
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "Settu tóman diskling í drif %s"

#: install_steps_interactive.pm:1287
#, c-format
msgid "Creating auto install floppy..."
msgstr "Bý til diskling fyrir sjálfvirka uppsetningu..."

#: install_steps_interactive.pm:1298
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"Sum skref eru ennþá eftir.\n"
"\n"
"Viltu virkilega hætta núna?"

#: install_steps_interactive.pm:1313
#, c-format
msgid "Generate auto install floppy"
msgstr "Búa til diskling fyrir sjálfvirka uppsetningu"

#: install_steps_interactive.pm:1315
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrake Linux Installation %s"
msgstr "Mandrake Linux innsetning %s"

#: install_steps_newt.pm:33
#, c-format
msgid ""
"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr ""
"  <Tab>/<Alt-Tab> milli hluta   |   <Bilslá> velur   |   <F12> næsti skjár "

#: interactive.pm:170
#, c-format
msgid "Choose a file"
msgstr "Veldu skrá"

#: interactive.pm:372
#, c-format
msgid "Basic"
msgstr "Einfalt"

#: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:509
#, c-format
msgid "Finish"
msgstr "Ljúka"

#: interactive/newt.pm:83
#, c-format
msgid "Do"
msgstr "Áfram"

#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "Rangt val, reyndu aftur\n"

#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "Þitt val? (sjálfgefið %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"Svæði sem þú verður að fylla:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "Þitt val? (0/1, sjálfgefið %s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "Hnappur %s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "Viltu smella á þennan hnapp?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "Þitt val? (sjálfgefið %s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " sláið inn 'void' fyrir autt val"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> Það er úr mörgu að velja (%s).\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "Endursenda"

#: keyboard.pm:137 keyboard.pm:169
#, c-format
msgid "Czech (QWERTZ)"
msgstr "Tékkneskt (QWERTZ)"

#: keyboard.pm:138 keyboard.pm:171
#, c-format
msgid "German"
msgstr "Þýskt"

#: keyboard.pm:139
#, c-format
msgid "Dvorak"
msgstr "Dvorak"

#: keyboard.pm:140 keyboard.pm:179
#, c-format
msgid "Spanish"
msgstr "Spænskt"

#: keyboard.pm:141 keyboard.pm:180
#, c-format
msgid "Finnish"
msgstr "Finnskt"

#: keyboard.pm:142 keyboard.pm:181
#, c-format
msgid "French"
msgstr "Franskt"

#: keyboard.pm:143 keyboard.pm:217
#, c-format
msgid "Norwegian"
msgstr "Norskt"

#: keyboard.pm:144
#, c-format
msgid "Polish"
msgstr "Pólskt"

#: keyboard.pm:145 keyboard.pm:226
#, c-format
msgid "Russian"
msgstr "Rússneskt"

#: keyboard.pm:147 keyboard.pm:230
#, c-format
msgid "Swedish"
msgstr "Sænskt"

#: keyboard.pm:148 keyboard.pm:249
#, c-format
msgid "UK keyboard"
msgstr "Breskt lyklaborð"

#: keyboard.pm:149 keyboard.pm:250
#, c-format
msgid "US keyboard"
msgstr "Bandarískt lyklaborð"

#: keyboard.pm:151
#, c-format
msgid "Albanian"
msgstr "Albanskt"

#: keyboard.pm:152
#, c-format
msgid "Armenian (old)"
msgstr "Armenskt (gamalt)"

#: keyboard.pm:153
#, c-format
msgid "Armenian (typewriter)"
msgstr "Armenskt (hljóðfræðilegt)"

#: keyboard.pm:154
#, c-format
msgid "Armenian (phonetic)"
msgstr "Armenskt (hljóðfræðilegt)"

#: keyboard.pm:155
#, c-format
msgid "Arabic"
msgstr "Arabískt"

#: keyboard.pm:156
#, c-format
msgid "Azerbaidjani (latin)"
msgstr "Adzerbadjanskt (latneskt)"

#: keyboard.pm:158
#, c-format
msgid "Belgian"
msgstr "Belgískt"

#: keyboard.pm:159
#, c-format
msgid "Bengali"
msgstr "Bengalskt"

#: keyboard.pm:160
#, c-format
msgid "Bulgarian (phonetic)"
msgstr "Búlgarskt (hljóðfræðilegt)"

#: keyboard.pm:161
#, c-format
msgid "Bulgarian (BDS)"
msgstr "Búlgarskt (BDS)"

#: keyboard.pm:162
#, c-format
msgid "Brazilian (ABNT-2)"
msgstr "Brasilískt (ABNT 2)"

#: keyboard.pm:165
#, c-format
msgid "Bosnian"
msgstr "Bosnískt"

#: keyboard.pm:166
#, c-format
msgid "Belarusian"
msgstr "Hvít-Rússneskt"

#: keyboard.pm:167
#, c-format
msgid "Swiss (German layout)"
msgstr "Svissneskt (þýsk uppsetn.)"

#: keyboard.pm:168
#, c-format
msgid "Swiss (French layout)"
msgstr "Svissneskt (frönsk uppsetn.)"

#: keyboard.pm:170
#, c-format
msgid "Czech (QWERTY)"
msgstr "Tékkneskt (QWERTY)"

#: keyboard.pm:172
#, c-format
msgid "German (no dead keys)"
msgstr "Þýskt (engir dauðir lyklar)"

#: keyboard.pm:173
#, c-format
msgid "Devanagari"
msgstr "Devanagari"

#: keyboard.pm:174
#, c-format
msgid "Danish"
msgstr "Danskt"

#: keyboard.pm:175
#, c-format
msgid "Dvorak (US)"
msgstr "Dvorak (US)"

#: keyboard.pm:176
#, c-format
msgid "Dvorak (Norwegian)"
msgstr "Dvorak (Norskt)"

#: keyboard.pm:177
#, c-format
msgid "Dvorak (Swedish)"
msgstr "Dvorak (Sænskt)"

#: keyboard.pm:178
#, c-format
msgid "Estonian"
msgstr "Eistlenskt"

#: keyboard.pm:182
#, c-format
msgid "Georgian (\"Russian\" layout)"
msgstr "Georgískt (\"Rússneskt\")"

#: keyboard.pm:183
#, c-format
msgid "Georgian (\"Latin\" layout)"
msgstr "Georgískt (\"Latínu\")"

#: keyboard.pm:184
#, c-format
msgid "Greek"
msgstr "Grískt"

#: keyboard.pm:185
#, c-format
msgid "Greek (polytonic)"
msgstr ""

#: keyboard.pm:186
#, c-format
msgid "Gujarati"
msgstr "Gujarati"

#: keyboard.pm:187
#, c-format
msgid "Gurmukhi"
msgstr "Gurmukhi"

#: keyboard.pm:188
#, c-format
msgid "Hungarian"
msgstr "Ungverskt"

#: keyboard.pm:189
#, c-format
msgid "Croatian"
msgstr "Króatískt"

#: keyboard.pm:190
#, c-format
msgid "Irish"
msgstr ""

#: keyboard.pm:191
#, c-format
msgid "Israeli"
msgstr "Ísraelskt"

#: keyboard.pm:192
#, c-format
msgid "Israeli (Phonetic)"
msgstr "Ísraelískt (hljóðfr.)"

#: keyboard.pm:193
#, c-format
msgid "Iranian"
msgstr "Íranskt"

#: keyboard.pm:194
#, c-format
msgid "Icelandic"
msgstr "Íslenskt"

#: keyboard.pm:195
#, c-format
msgid "Italian"
msgstr "Ítalskt"

#: keyboard.pm:196
#, c-format
msgid "Inuktitut"
msgstr "Inuktitut"

#: keyboard.pm:197
#, c-format
msgid "Japanese 106 keys"
msgstr "Japanskt 106 lykla"

#: keyboard.pm:198
#, c-format
msgid "Kannada"
msgstr "Kanada"

#: keyboard.pm:201
#, c-format
msgid "Korean keyboard"
msgstr "Kóreskt lyklaborð"

#: keyboard.pm:202
#, c-format
msgid "Latin American"
msgstr "Suður amerískt"

#: keyboard.pm:203
#, c-format
msgid "Laotian"
msgstr "Laotian"

#: keyboard.pm:204
#, c-format
msgid "Lithuanian AZERTY (old)"
msgstr "Litháenískt AZERTY (gamalt)"

#: keyboard.pm:206
#, c-format
msgid "Lithuanian AZERTY (new)"
msgstr "Litháenískt AZERTY (nýtt)"

#: keyboard.pm:207
#, c-format
msgid "Lithuanian \"number row\" QWERTY"
msgstr "Litháenískt \"töluröð\" QWERTY"

#: keyboard.pm:208
#, c-format
msgid "Lithuanian \"phonetic\" QWERTY"
msgstr "Litháenískt \"hljóðfræðilegt\" QWERTY"

#: keyboard.pm:209
#, c-format
msgid "Latvian"
msgstr "Lettneska"

#: keyboard.pm:210
#, c-format
msgid "Malayalam"
msgstr "Malayalam"

#: keyboard.pm:211
#, c-format
msgid "Macedonian"
msgstr "Makedónískt"

#: keyboard.pm:212
#, c-format
msgid "Myanmar (Burmese)"
msgstr "Myanmar (Búrmenskt)"

#: keyboard.pm:213
#, c-format
msgid "Mongolian (cyrillic)"
msgstr "Mongólskt (kýrílskt)"

#: keyboard.pm:214
#, c-format
msgid "Maltese (UK)"
msgstr "Maltneskt (UK)"

#: keyboard.pm:215
#, c-format
msgid "Maltese (US)"
msgstr "Maltneskt (US)"

#: keyboard.pm:216
#, c-format
msgid "Dutch"
msgstr "Hollenskt"

#: keyboard.pm:218
#, c-format
msgid "Oriya"
msgstr "Oriya"

#: keyboard.pm:219
#, c-format
msgid "Polish (qwerty layout)"
msgstr "Pólskt (qwerty)"

#: keyboard.pm:220
#, c-format
msgid "Polish (qwertz layout)"
msgstr "Pólskt (qwertz)"

#: keyboard.pm:221
#, c-format
msgid "Portuguese"
msgstr "Portúgalskt"

#: keyboard.pm:222
#, c-format
msgid "Canadian (Quebec)"
msgstr "Kanadískt (Quebec)"

#: keyboard.pm:224
#, c-format
msgid "Romanian (qwertz)"
msgstr "Rúmenskt (qwertz)"

#: keyboard.pm:225
#, c-format
msgid "Romanian (qwerty)"
msgstr "Rúmenskt (qwerty)"

#: keyboard.pm:227
#, c-format
msgid "Russian (Phonetic)"
msgstr "Rússneskt (hljóðfræðilegt)"

#: keyboard.pm:228
#, c-format
msgid "Saami (norwegian)"
msgstr "Saami (Norskt)"

#: keyboard.pm:229
#, c-format
msgid "Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:231
#, c-format
msgid "Slovenian"
msgstr "Slóvenskt"

#: keyboard.pm:232
#, c-format
msgid "Slovakian (QWERTZ)"
msgstr "Slóvakískt (QWERTZ)"

#: keyboard.pm:233
#, c-format
msgid "Slovakian (QWERTY)"
msgstr "Slóvakískt (QWERTY)"

#: keyboard.pm:235
#, c-format
msgid "Serbian (cyrillic)"
msgstr "Serbneskt (kýrílskt)"

#: keyboard.pm:236
#, c-format
msgid "Syriac"
msgstr "Sýrland"

#: keyboard.pm:237
#, c-format
msgid "Syriac (phonetic)"
msgstr "Sýrlenskt (hljóðfræðilegt)"

#: keyboard.pm:238
#, c-format
msgid "Telugu"
msgstr "Telugu"

#: keyboard.pm:240
#, c-format
msgid "Tamil (ISCII-layout)"
msgstr "Tamílskt (ISCII uppsetning)"

#: keyboard.pm:241
#, c-format
msgid "Tamil (Typewriter-layout)"
msgstr "Tamílskt (ritvélaruppsetning)"

#: keyboard.pm:242
#, c-format
msgid "Thai keyboard"
msgstr "Tælenskt lyklaborð"

#: keyboard.pm:244
#, c-format
msgid "Tajik keyboard"
msgstr "Tajik lyklaborð"

#: keyboard.pm:245
#, c-format
msgid "Turkish (traditional \"F\" model)"
msgstr "Tyrkneskt (hefðbundið \"F\" módel)"

#: keyboard.pm:246
#, c-format
msgid "Turkish (modern \"Q\" model)"
msgstr "Tyrkneskt (nútíma \"Q\" módel)"

#: keyboard.pm:248
#, c-format
msgid "Ukrainian"
msgstr "Úkraínskt"

#: keyboard.pm:251
#, c-format
msgid "US keyboard (international)"
msgstr "Bandarískt (alþjóðlegt)"

#: keyboard.pm:252
#, c-format
msgid "Uzbek (cyrillic)"
msgstr "Úsbeskt (kýrílskt)"

#: keyboard.pm:253
#, c-format
msgid "Vietnamese \"numeric row\" QWERTY"
msgstr "Víetnamskt \"töluröð\" QWERTY"

#: keyboard.pm:254
#, c-format
msgid "Yugoslavian (latin)"
msgstr "Júgoslavneskt (Latínu upps.)"

#: keyboard.pm:261
#, c-format
msgid "Right Alt key"
msgstr "Hægri Alt lykill"

#: keyboard.pm:262
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "Báðir Shift lyklar samtímis"

#: keyboard.pm:263
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Ctrl og Shift lyklar samtímis"

#: keyboard.pm:264
#, c-format
msgid "CapsLock key"
msgstr "CapsLock lykill"

#: keyboard.pm:265
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl og Alt lyklar samtímis"

#: keyboard.pm:266
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt og Shift lyklar samtímis"

#: keyboard.pm:267
#, c-format
msgid "\"Menu\" key"
msgstr "\"Menu\" lykill"

#: keyboard.pm:268
#, c-format
msgid "Left \"Windows\" key"
msgstr "Vinstri \"Windows\" lykill"

#: keyboard.pm:269
#, c-format
msgid "Right \"Windows\" key"
msgstr "Hægri \"Windows\" lykill"

#: keyboard.pm:270
#, c-format
msgid "Both Control keys simultaneously"
msgstr "Báðir Ctrl lyklar samtímis"

#: keyboard.pm:271
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "Báðir Alt lyklar samtímis"

#: keyboard.pm:272
#, c-format
msgid "Left Shift key"
msgstr "Vinstri Shift lykill"

#: keyboard.pm:273
#, c-format
msgid "Right Shift key"
msgstr "Hægri Shift lykill"

#: keyboard.pm:274
#, c-format
msgid "Left Alt key"
msgstr "Vinstri Alt lykill"

#: keyboard.pm:275
#, c-format
msgid "Left Control key"
msgstr "Vinstri Ctrl lykill"

#: keyboard.pm:276
#, c-format
msgid "Right Control key"
msgstr "Hægri Ctrl lykill"

#: keyboard.pm:307
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"Hér getur þú valið lykla eða lyklasamsetningar sem skipta \n"
"milli mismunandi lykilboðsuppsetninga (t.d íslenskt/enskt)"

#: keyboard.pm:312
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#: lang.pm:144
#, c-format
msgid "default:LTR"
msgstr "Sjálfgefið:LTR"

#: lang.pm:160
#, c-format
msgid "Afghanistan"
msgstr "Afganistan"

#: lang.pm:161
#, c-format
msgid "Andorra"
msgstr "Andorra"

#: lang.pm:162
#, c-format
msgid "United Arab Emirates"
msgstr "Sameinuðu Arabísku Furstadæmin"

#: lang.pm:163
#, c-format
msgid "Antigua and Barbuda"
msgstr "Antigua og Barbuda"

#: lang.pm:164
#, c-format
msgid "Anguilla"
msgstr "Anguilla"

#: lang.pm:165
#, c-format
msgid "Albania"
msgstr "Albanía"

#: lang.pm:166
#, c-format
msgid "Armenia"
msgstr "Armenía"

#: lang.pm:167
#, c-format
msgid "Netherlands Antilles"
msgstr "Holland, Antilleyjar"

#: lang.pm:168
#, c-format
msgid "Angola"
msgstr "Angóla"

#: lang.pm:169
#, c-format
msgid "Antarctica"
msgstr "Suðurskautslandið"

#: lang.pm:170 standalone/drakxtv:51
#, c-format
msgid "Argentina"
msgstr "Argentína"

#: lang.pm:171
#, c-format
msgid "American Samoa"
msgstr "Ameríku Samóeyjar"

#: lang.pm:173 standalone/drakxtv:49
#, c-format
msgid "Australia"
msgstr "Ástralía"

#: lang.pm:174
#, c-format
msgid "Aruba"
msgstr "Aruba"

#: lang.pm:175
#, c-format
msgid "Azerbaijan"
msgstr "Asjerbæjan"

#: lang.pm:176
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "Bosnía og Herzegónía"

#: lang.pm:177
#, c-format
msgid "Barbados"
msgstr "Barbados"

#: lang.pm:178
#, c-format
msgid "Bangladesh"
msgstr "Bangladesh"

#: lang.pm:180
#, c-format
msgid "Burkina Faso"
msgstr "Burkina Faso"

#: lang.pm:181
#, c-format
msgid "Bulgaria"
msgstr "Búlgaría"

#: lang.pm:182
#, c-format
msgid "Bahrain"
msgstr "Bahrain"

#: lang.pm:183
#, c-format
msgid "Burundi"
msgstr "Búrúndi"

#: lang.pm:184
#, c-format
msgid "Benin"
msgstr "Benín"

#: lang.pm:185
#, c-format
msgid "Bermuda"
msgstr "Bermúda"

#: lang.pm:186
#, c-format
msgid "Brunei Darussalam"
msgstr "Brunei Darussalam"

#: lang.pm:187
#, c-format
msgid "Bolivia"
msgstr "Bólivía"

#: lang.pm:188
#, c-format
msgid "Brazil"
msgstr "Brasilía"

#: lang.pm:189
#, c-format
msgid "Bahamas"
msgstr "Bahamaeyjar"

#: lang.pm:190
#, c-format
msgid "Bhutan"
msgstr "Bútan"

#: lang.pm:191
#, c-format
msgid "Bouvet Island"
msgstr "Bouvet eyja"

#: lang.pm:192
#, c-format
msgid "Botswana"
msgstr "Botswana"

#: lang.pm:193
#, c-format
msgid "Belarus"
msgstr "Hvítarússland"

#: lang.pm:194
#, c-format
msgid "Belize"
msgstr "Belís"

#: lang.pm:195
#, c-format
msgid "Canada"
msgstr "Kanada"

#: lang.pm:196
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "Kókos (Keeling) eyjar"

#: lang.pm:197
#, c-format
msgid "Congo (Kinshasa)"
msgstr "Kongó (Kinshasa)"

#: lang.pm:198
#, c-format
msgid "Central African Republic"
msgstr "Miðafríkulýðveldið"

#: lang.pm:199
#, c-format
msgid "Congo (Brazzaville)"
msgstr "Kongó (brassaville)"

#: lang.pm:200
#, c-format
msgid "Switzerland"
msgstr "Sviss"

#: lang.pm:201
#, c-format
msgid "Cote d'Ivoire"
msgstr "Cote d'Ivoire"

#: lang.pm:202
#, c-format
msgid "Cook Islands"
msgstr "Cook eyjar"

#: lang.pm:203
#, c-format
msgid "Chile"
msgstr "Chíle"

#: lang.pm:204
#, c-format
msgid "Cameroon"
msgstr "Kamerún"

#: lang.pm:205
#, c-format
msgid "China"
msgstr "Kína"

#: lang.pm:206
#, c-format
msgid "Colombia"
msgstr "Kólumbía"

#: lang.pm:208
#, c-format
msgid "Cuba"
msgstr "Kúba"

#: lang.pm:209
#, c-format
msgid "Cape Verde"
msgstr "Grænhöfðaeyjar"

#: lang.pm:210
#, c-format
msgid "Christmas Island"
msgstr "Jólaeyjar"

#: lang.pm:211
#, c-format
msgid "Cyprus"
msgstr "Kýpur"

#: lang.pm:214
#, c-format
msgid "Djibouti"
msgstr "Djibútí"

#: lang.pm:215
#, c-format
msgid "Denmark"
msgstr "Danmörk"

#: lang.pm:216
#, c-format
msgid "Dominica"
msgstr "Dominiká"

#: lang.pm:217
#, c-format
msgid "Dominican Republic"
msgstr "Dóminíska lýðveldið"

#: lang.pm:218
#, c-format
msgid "Algeria"
msgstr "Algería"

#: lang.pm:219
#, c-format
msgid "Ecuador"
msgstr "Ekvador"

#: lang.pm:220
#, c-format
msgid "Estonia"
msgstr "Eistland"

#: lang.pm:221
#, c-format
msgid "Egypt"
msgstr "Egyptaland"

#: lang.pm:222
#, c-format
msgid "Western Sahara"
msgstr "Vestur Sahara"

#: lang.pm:223
#, c-format
msgid "Eritrea"
msgstr "Erítrea"

#: lang.pm:224 network/adsl_consts.pm:193 network/adsl_consts.pm:200
#: network/adsl_consts.pm:209 network/adsl_consts.pm:220
#, c-format
msgid "Spain"
msgstr "Spánn"

#: lang.pm:225
#, c-format
msgid "Ethiopia"
msgstr "Eþíópía"

#: lang.pm:226 network/adsl_consts.pm:119
#, c-format
msgid "Finland"
msgstr "Finnland"

#: lang.pm:227
#, c-format
msgid "Fiji"
msgstr "Fíjí"

#: lang.pm:228
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "Falklandseyjar (Malvinas)"

#: lang.pm:229
#, c-format
msgid "Micronesia"
msgstr "Míkrónesía"

#: lang.pm:230
#, c-format
msgid "Faroe Islands"
msgstr "Færeyjar"

#: lang.pm:232
#, c-format
msgid "Gabon"
msgstr "Gabon"

#: lang.pm:233 network/adsl_consts.pm:237 network/adsl_consts.pm:244
#: network/netconnect.pm:51
#, c-format
msgid "United Kingdom"
msgstr "Stóra Bretland"

#: lang.pm:234
#, c-format
msgid "Grenada"
msgstr "Grenada"

#: lang.pm:235
#, c-format
msgid "Georgia"
msgstr "Georgía"

#: lang.pm:236
#, c-format
msgid "French Guiana"
msgstr "Franska Gínea"

#: lang.pm:237
#, c-format
msgid "Ghana"
msgstr "Gana"

#: lang.pm:238
#, c-format
msgid "Gibraltar"
msgstr "Gíbraltar"

#: lang.pm:239
#, c-format
msgid "Greenland"
msgstr "Grænland"

#: lang.pm:240
#, c-format
msgid "Gambia"
msgstr "Gambía"

#: lang.pm:241
#, c-format
msgid "Guinea"
msgstr "Gínea"

#: lang.pm:242
#, c-format
msgid "Guadeloupe"
msgstr "Gvadalúp"

#: lang.pm:243
#, c-format
msgid "Equatorial Guinea"
msgstr "Miðbaugs Gínea"

#: lang.pm:245
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr "Suður Georgía og suður samlokueyjar"

#: lang.pm:246
#, c-format
msgid "Guatemala"
msgstr "Gvatemala"

#: lang.pm:247
#, c-format
msgid "Guam"
msgstr "Guam"

#: lang.pm:248
#, c-format
msgid "Guinea-Bissau"
msgstr "Gínea-Bissáu"

#: lang.pm:249
#, c-format
msgid "Guyana"
msgstr "Gvíana"

#: lang.pm:250
#, fuzzy, c-format
msgid "China (Hong Kong)"
msgstr "Hong Kong"

#: lang.pm:251
#, c-format
msgid "Heard and McDonald Islands"
msgstr "Heard og McDonald eyjar"

#: lang.pm:252
#, c-format
msgid "Honduras"
msgstr "Hondúras"

#: lang.pm:253
#, c-format
msgid "Croatia"
msgstr "Króvatía"

#: lang.pm:254
#, c-format
msgid "Haiti"
msgstr "Haíti"

#: lang.pm:255 network/adsl_consts.pm:144
#, c-format
msgid "Hungary"
msgstr "Ungverjaland"

#: lang.pm:256
#, c-format
msgid "Indonesia"
msgstr "Indónesía"

#: lang.pm:257 standalone/drakxtv:48
#, c-format
msgid "Ireland"
msgstr "Írland"

#: lang.pm:258
#, c-format
msgid "Israel"
msgstr "Ísrael"

#: lang.pm:259
#, c-format
msgid "India"
msgstr "Indland"

#: lang.pm:260
#, c-format
msgid "British Indian Ocean Territory"
msgstr "Bresku indíueyjar"

#: lang.pm:261
#, c-format
msgid "Iraq"
msgstr "Írak"

#: lang.pm:262
#, c-format
msgid "Iran"
msgstr "Íran"

#: lang.pm:263
#, c-format
msgid "Iceland"
msgstr "Ísland"

#: lang.pm:265
#, c-format
msgid "Jamaica"
msgstr "Jamaíka"

#: lang.pm:266
#, c-format
msgid "Jordan"
msgstr "Jórdanía"

#: lang.pm:267
#, c-format
msgid "Japan"
msgstr "Japan"

#: lang.pm:268
#, c-format
msgid "Kenya"
msgstr "Kenía"

#: lang.pm:269
#, c-format
msgid "Kyrgyzstan"
msgstr "Kirgistan"

#: lang.pm:270
#, c-format
msgid "Cambodia"
msgstr "Kambódía"

#: lang.pm:271
#, c-format
msgid "Kiribati"
msgstr "Kiribati"

#: lang.pm:272
#, c-format
msgid "Comoros"
msgstr "Kómoros"

#: lang.pm:273
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "Saint Kitts og Nevis"

#: lang.pm:274
#, c-format
msgid "Korea (North)"
msgstr "Kórea (norður)"

#: lang.pm:275
#, c-format
msgid "Korea"
msgstr "Kórea"

#: lang.pm:276
#, c-format
msgid "Kuwait"
msgstr "Kúvæt"

#: lang.pm:277
#, c-format
msgid "Cayman Islands"
msgstr "Keyman eyjar"

#: lang.pm:278
#, c-format
msgid "Kazakhstan"
msgstr "Kasakstan"

#: lang.pm:279
#, c-format
msgid "Laos"
msgstr "Laos"

#: lang.pm:280
#, c-format
msgid "Lebanon"
msgstr "Líbanon"

#: lang.pm:281
#, c-format
msgid "Saint Lucia"
msgstr "Sankti Lúsía"

#: lang.pm:282
#, c-format
msgid "Liechtenstein"
msgstr "Liechtenstein"

#: lang.pm:283
#, c-format
msgid "Sri Lanka"
msgstr "Sri Lanka"

#: lang.pm:284
#, c-format
msgid "Liberia"
msgstr "Líbería"

#: lang.pm:285
#, c-format
msgid "Lesotho"
msgstr "Lesótó"

#: lang.pm:286
#, c-format
msgid "Lithuania"
msgstr "Litháen"

#: lang.pm:287
#, c-format
msgid "Luxembourg"
msgstr "Lúxemborg"

#: lang.pm:288
#, c-format
msgid "Latvia"
msgstr "Lettland"

#: lang.pm:289
#, c-format
msgid "Libya"
msgstr "Líbía"

#: lang.pm:290
#, c-format
msgid "Morocco"
msgstr "Marokkó"

#: lang.pm:291
#, c-format
msgid "Monaco"
msgstr "Mónakó"

#: lang.pm:292
#, c-format
msgid "Moldova"
msgstr "Moldóvía"

#: lang.pm:293
#, c-format
msgid "Madagascar"
msgstr "Madagaskar"

#: lang.pm:294
#, c-format
msgid "Marshall Islands"
msgstr "Marshall eyjar"

#: lang.pm:295
#, c-format
msgid "Macedonia"
msgstr "Makedónía"

#: lang.pm:296
#, c-format
msgid "Mali"
msgstr "Malí"

#: lang.pm:297
#, c-format
msgid "Myanmar"
msgstr "Myanmar"

#: lang.pm:298
#, c-format
msgid "Mongolia"
msgstr "Mongólía"

#: lang.pm:299
#, c-format
msgid "Northern Mariana Islands"
msgstr "Norður Maríanaeyjar"

#: lang.pm:300
#, c-format
msgid "Martinique"
msgstr "Martiník"

#: lang.pm:301
#, c-format
msgid "Mauritania"
msgstr "Máritanía"

#: lang.pm:302
#, c-format
msgid "Montserrat"
msgstr "Montserrat"

#: lang.pm:303
#, c-format
msgid "Malta"
msgstr "Malta"

#: lang.pm:304
#, c-format
msgid "Mauritius"
msgstr "Máritus"

#: lang.pm:305
#, c-format
msgid "Maldives"
msgstr "Maldíví"

#: lang.pm:306
#, c-format
msgid "Malawi"
msgstr "Malaví"

#: lang.pm:307
#, c-format
msgid "Mexico"
msgstr "Mexíkó"

#: lang.pm:308
#, c-format
msgid "Malaysia"
msgstr "Malasía"

#: lang.pm:309
#, c-format
msgid "Mozambique"
msgstr "Mósabmbík"

#: lang.pm:310
#, c-format
msgid "Namibia"
msgstr "Namibía"

#: lang.pm:311
#, c-format
msgid "New Caledonia"
msgstr "Nýja Kaledónía"

#: lang.pm:312
#, c-format
msgid "Niger"
msgstr "Níger"

#: lang.pm:313
#, c-format
msgid "Norfolk Island"
msgstr "Norfolk eyjar"

#: lang.pm:314
#, c-format
msgid "Nigeria"
msgstr "Nígería"

#: lang.pm:315
#, c-format
msgid "Nicaragua"
msgstr "Nígarakúa"

#: lang.pm:318
#, c-format
msgid "Nepal"
msgstr "Nepal"

#: lang.pm:319
#, c-format
msgid "Nauru"
msgstr "Nárú"

#: lang.pm:320
#, c-format
msgid "Niue"
msgstr "Niue"

#: lang.pm:321
#, c-format
msgid "New Zealand"
msgstr "Nýja Sjáland"

#: lang.pm:322
#, c-format
msgid "Oman"
msgstr "Óman"

#: lang.pm:323
#, c-format
msgid "Panama"
msgstr "Panama"

#: lang.pm:324
#, c-format
msgid "Peru"
msgstr "Perú"

#: lang.pm:325
#, c-format
msgid "French Polynesia"
msgstr "Franska Pólínesía"

#: lang.pm:326
#, c-format
msgid "Papua New Guinea"
msgstr "Papúa Nýja-Gínea"

#: lang.pm:327
#, c-format
msgid "Philippines"
msgstr "Filippseyjar"

#: lang.pm:328
#, c-format
msgid "Pakistan"
msgstr "Pakistan"

#: lang.pm:329 network/adsl_consts.pm:177
#, c-format
msgid "Poland"
msgstr "Pólland"

#: lang.pm:330
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "Saint Pierre og Miquelon"

#: lang.pm:331
#, c-format
msgid "Pitcairn"
msgstr "Pitcairn"

#: lang.pm:332
#, c-format
msgid "Puerto Rico"
msgstr "Puerto Ríko"

#: lang.pm:333
#, c-format
msgid "Palestine"
msgstr "Palestína"

#: lang.pm:334 network/adsl_consts.pm:187
#, c-format
msgid "Portugal"
msgstr "Portúgal"

#: lang.pm:335
#, c-format
msgid "Paraguay"
msgstr "Paragvæ"

#: lang.pm:336
#, c-format
msgid "Palau"
msgstr "Palá"

#: lang.pm:337
#, c-format
msgid "Qatar"
msgstr "Kvatar"

#: lang.pm:338
#, c-format
msgid "Reunion"
msgstr "Reunion"

#: lang.pm:339
#, c-format
msgid "Romania"
msgstr "Rúmenía"

#: lang.pm:340
#, c-format
msgid "Russia"
msgstr "Rússland"

#: lang.pm:341
#, c-format
msgid "Rwanda"
msgstr "Rúanda"

#: lang.pm:342
#, c-format
msgid "Saudi Arabia"
msgstr "Sádiarabía"

#: lang.pm:343
#, c-format
msgid "Solomon Islands"
msgstr "Salómon eyjar"

#: lang.pm:344
#, c-format
msgid "Seychelles"
msgstr "Seychelles"

#: lang.pm:345
#, c-format
msgid "Sudan"
msgstr "Súdan"

#: lang.pm:347
#, c-format
msgid "Singapore"
msgstr "Singapúr"

#: lang.pm:348
#, c-format
msgid "Saint Helena"
msgstr "Saint Helena"

#: lang.pm:349
#, c-format
msgid "Slovenia"
msgstr "Slóvenía"

#: lang.pm:350
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "Svalbarði og Jan Mayen"

#: lang.pm:351
#, c-format
msgid "Slovakia"
msgstr "Slóvakía"

#: lang.pm:352
#, c-format
msgid "Sierra Leone"
msgstr "Síera Leóne"

#: lang.pm:353
#, c-format
msgid "San Marino"
msgstr "San Marínó"

#: lang.pm:354
#, c-format
msgid "Senegal"
msgstr "Senegal"

#: lang.pm:355
#, c-format
msgid "Somalia"
msgstr "Sómalía"

#: lang.pm:356
#, c-format
msgid "Suriname"
msgstr "Súrinam"

#: lang.pm:357
#, c-format
msgid "Sao Tome and Principe"
msgstr "Sao Tome og Prinsípe"

#: lang.pm:358
#, c-format
msgid "El Salvador"
msgstr "El Salvador"

#: lang.pm:359
#, c-format
msgid "Syria"
msgstr "Sýrland"

#: lang.pm:360
#, c-format
msgid "Swaziland"
msgstr "Svasiland"

#: lang.pm:361
#, c-format
msgid "Turks and Caicos Islands"
msgstr "Turks og Kaikós eyjar"

#: lang.pm:362
#, c-format
msgid "Chad"
msgstr "Chad"

#: lang.pm:363
#, c-format
msgid "French Southern Territories"
msgstr "Frönsku suðureyjar"

#: lang.pm:364
#, c-format
msgid "Togo"
msgstr "Tógó"

#: lang.pm:365
#, c-format
msgid "Thailand"
msgstr "Taíland"

#: lang.pm:366
#, c-format
msgid "Tajikistan"
msgstr "Tajikistan"

#: lang.pm:367
#, c-format
msgid "Tokelau"
msgstr "Tokelau"

#: lang.pm:368
#, c-format
msgid "East Timor"
msgstr "Austur Tímor"

#: lang.pm:369
#, c-format
msgid "Turkmenistan"
msgstr "Túrkmenistan"

#: lang.pm:370
#, c-format
msgid "Tunisia"
msgstr "Túnis"

#: lang.pm:371
#, c-format
msgid "Tonga"
msgstr "Tonga"

#: lang.pm:372
#, c-format
msgid "Turkey"
msgstr "Tyrkland"

#: lang.pm:373
#, c-format
msgid "Trinidad and Tobago"
msgstr "Trínidad og Tóbagó"

#: lang.pm:374
#, c-format
msgid "Tuvalu"
msgstr "Túvaú"

#: lang.pm:375
#, c-format
msgid "Taiwan"
msgstr "Tævan"

#: lang.pm:376
#, c-format
msgid "Tanzania"
msgstr "Tansanía"

#: lang.pm:377
#, c-format
msgid "Ukraine"
msgstr "Úkraína"

#: lang.pm:378
#, c-format
msgid "Uganda"
msgstr "Úganda"

#: lang.pm:379
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "Bandaríkin, smærri eyjar"

#: lang.pm:381
#, c-format
msgid "Uruguay"
msgstr "Úrúgvæ"

#: lang.pm:382
#, c-format
msgid "Uzbekistan"
msgstr "Úsbekistan"

#: lang.pm:383
#, c-format
msgid "Vatican"
msgstr "Vatikanið"

#: lang.pm:384
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "Saint Vincent og Grenadín"

#: lang.pm:385
#, c-format
msgid "Venezuela"
msgstr "Venesúela"

#: lang.pm:386
#, c-format
msgid "Virgin Islands (British)"
msgstr "Jómfrúreyjar (Breskt)"

#: lang.pm:387
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "Jómfrúreyjar (US)"

#: lang.pm:388
#, c-format
msgid "Vietnam"
msgstr "Víetnam"

#: lang.pm:389
#, c-format
msgid "Vanuatu"
msgstr "Vanuatú"

#: lang.pm:390
#, c-format
msgid "Wallis and Futuna"
msgstr "Wallis og Futuna"

#: lang.pm:391
#, c-format
msgid "Samoa"
msgstr "Samóa"

#: lang.pm:392
#, c-format
msgid "Yemen"
msgstr "Jemen"

#: lang.pm:393
#, c-format
msgid "Mayotte"
msgstr "Mayotte"

#: lang.pm:394
#, c-format
msgid "Serbia & Montenegro"
msgstr ""

#: lang.pm:395 standalone/drakxtv:50
#, c-format
msgid "South Africa"
msgstr "Suður Afríka"

#: lang.pm:396
#, c-format
msgid "Zambia"
msgstr "Sambía"

#: lang.pm:397
#, c-format
msgid "Zimbabwe"
msgstr "Simbave"

#: lang.pm:966
#, c-format
msgid "Welcome to %s"
msgstr "Velkomin(n) að %s"

#: loopback.pm:32
#, c-format
msgid "Circular mounts %s\n"
msgstr "Hringtenging %s\n"

#: lvm.pm:115
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "Fjarlægðu sýndardrifin fyrst\n"

#: modules/interactive.pm:21 standalone/drakconnect:962
#, c-format
msgid "Parameters"
msgstr "Viðföng"

#: modules/interactive.pm:21 standalone/draksec:44
#, c-format
msgid "NONE"
msgstr ""

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "Uppsetning eininga"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "Þú getur stillt öll viðföng einingarinnar hér"

#: modules/interactive.pm:63
#, c-format
msgid "Found %s %s interfaces"
msgstr "Fann %s %s tengi"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "Er kannski eitt enn í vélinni?"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "Eru einhver %s tengi í tölvunni?"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "Skoðaðu vélbúnaðarupplýsingar"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#. -PO: the second is the vendor+model name
#: modules/interactive.pm:87
#, c-format
msgid "Installing driver for %s card %s"
msgstr "Set inn rekil fyrir %s kortið %s"

#: modules/interactive.pm:87
#, c-format
msgid "(module %s)"
msgstr "(eining %s)"

#: modules/interactive.pm:98
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
"Athugið að vistföng eru gefin upp með formerki 0x eins og '0x123'"

# ## skrytid
#: modules/interactive.pm:104
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"Þú getur núna gefið upp viðföng fyrir eininguna %s.\n"
"Viðföng eru gefin upp sem ``viðfang=gildi viðfang2=gildi2 ...''.\n"
"Til dæmis: ``io=0x300 irq=7''"

#: modules/interactive.pm:106
#, c-format
msgid "Module options:"
msgstr "Stillingar kjarnaeininga:"

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:118
#, c-format
msgid "Which %s driver should I try?"
msgstr "Hvaða %s rekil viltu prófa?"

#: modules/interactive.pm:127
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to "
"specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it "
"should\n"
"not cause any damage."
msgstr ""
"Í sumum tilfellum þarf rekillinn %s auka viðföng svo hann virki rétt,\n"
" þó hann virki vel í flestum tilfellum án þeirra.  Viltu setja inn auka\n"
" viðföng eða leyfa reklinum sjálfum að leita að þeim upplýsingum sem\n"
" hann þarf?  Stundum frystir sjálfvirk stilling vélina en það ætti ekki\n"
"að skemma neitt."

#: modules/interactive.pm:131
#, c-format
msgid "Autoprobe"
msgstr "Stilla sjálfvirkt"

#: modules/interactive.pm:131
#, c-format
msgid "Specify options"
msgstr "Stilla handvirkt"

#: modules/interactive.pm:143
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"Innsetning á einingu %s mistókst.\n"
"Viltu prófa aftur með ólík viðföng?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "tala"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d tölur aðskildar með kommu"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d strengir aðskildir með kommu"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "tölur aðskildar með kommu"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "strengir aðskildir með kommu"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - mús"

#: mouse.pm:31 security/level.pm:12
#, c-format
msgid "Standard"
msgstr "Venjuleg"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "Almenn PS2 hjól-mús"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36 network/modem.pm:23 network/modem.pm:37 network/modem.pm:42
#: network/modem.pm:73 network/netconnect.pm:481 network/netconnect.pm:482
#: network/netconnect.pm:483 network/netconnect.pm:503
#: network/netconnect.pm:508 network/netconnect.pm:520
#: network/netconnect.pm:525 network/netconnect.pm:541
#: network/netconnect.pm:543
#, fuzzy, c-format
msgid "Automatic"
msgstr "Sjálfvirkt IP"

#: mouse.pm:39 mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40 mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42 mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47 mouse.pm:79
#, c-format
msgid "1 button"
msgstr "1 hnappur"

#: mouse.pm:48 mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "Almenn 2 hnappa mús"

#: mouse.pm:50 mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "Almenn þriggja hnappa mús með skrunhermi"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "Hjól"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "raðtengd"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "Almenn þriggja hnappa mús"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech MouseMan"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "Logitech MouseMan með skrunhermi"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "Logitech CC Series með skrunhermi"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech mús (raðtengd, gömul C7 tegund)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "Logitech mús (raðtengd, gömul C7 tegund) með skrunhermi"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "Kensington Thinking Mouse með skrunhermi"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmús"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "2 hnappar"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "3 hnappar"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "3 hnappar með skrunhermi"

#: mouse.pm:86
#, fuzzy, c-format
msgid "Universal"
msgstr "Eftirvinnsla"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr ""

#: mouse.pm:92
#, c-format
msgid "none"
msgstr "ekkert"

#: mouse.pm:94
#, c-format
msgid "No mouse"
msgstr "Engin mús"

#: mouse.pm:515
#, c-format
msgid "Please test the mouse"
msgstr "Vinsamlega prófaðu músina"

#: mouse.pm:517
#, c-format
msgid "To activate the mouse,"
msgstr "Til að virkja músina,"

#: mouse.pm:518
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "Hreyfðu hjólið!"

#: network/adsl.pm:19
#, c-format
msgid "use pppoe"
msgstr "nota pppoe"

#: network/adsl.pm:20
#, c-format
msgid "use pptp"
msgstr "nota pptp"

#: network/adsl.pm:21
#, c-format
msgid "use dhcp"
msgstr "nota dhcp"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel speedtouch usb"
msgstr "Alcatel speedtouch usb"

#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
msgid " - detected"
msgstr "skynjuð"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using pppoa) usb"
msgstr "Sagem (notar pppoa) usb"

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using dhcp) usb"
msgstr "Sagem (notar dhcp) usb"

#: network/adsl.pm:35 network/netconnect.pm:679
#, c-format
msgid "Connect to the Internet"
msgstr "Tengast Internetinu"

#: network/adsl.pm:36 network/netconnect.pm:680
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use pptp, a few use dhcp.\n"
"If you don't know, choose 'use pppoe'"
msgstr ""
"Algengast er að tengjast við ADSL með pppoe\n"
"sumir nota pptp (Ísland), nokkrir nota dhcp.\n"
"Ef þú veist ekki, veldu þá 'nota pptp' (Ísland)"

#: network/adsl.pm:41 network/netconnect.pm:684
#, fuzzy, c-format
msgid "ADSL connection type :"
msgstr "ADSL tenging"

#: network/drakfirewall.pm:12
#, c-format
msgid "Web Server"
msgstr "Vefmiðlari"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "Nafnaþjónn léns (DNS)"

#: network/drakfirewall.pm:22
#, fuzzy, c-format
msgid "SSH server"
msgstr "SSH Þjónn"

#: network/drakfirewall.pm:27
#, fuzzy, c-format
msgid "FTP server"
msgstr "NTP þjónn"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Póstþjónn"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP og IMAP þjónn"

#: network/drakfirewall.pm:42
#, fuzzy, c-format
msgid "Telnet server"
msgstr "X miðlari"

#: network/drakfirewall.pm:48
#, fuzzy, c-format
msgid "Samba server"
msgstr "Samba Miðlari"

#: network/drakfirewall.pm:54
#, fuzzy, c-format
msgid "CUPS server"
msgstr "Nafnamiðlari"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr ""

#: network/drakfirewall.pm:125
#, c-format
msgid "No network card"
msgstr "Ekkert netkort fannst"

#: network/drakfirewall.pm:146
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrake Linux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall stillingar\n"
"\n"
"Þessi eining stillir prívat eldvegg fyrir þessa Mandrake Linux vél\n"
"Fyrir öruggan og aflmikinn eldvegg líttu á hina sértæku\n"
"Mandrake eldveggs útgáfu."

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""
"drakfirewall uppsetning\n"
"\n"
"Vertu viss um að hafa sett upp Staðarnet/Internet aðgangur með drakconnect "
"áður en lengra er haldið."

#: network/drakfirewall.pm:169
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "Að hvaða þjónustum viltu leyfa Internetaðgang?"

#: network/drakfirewall.pm:170
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"Þú getur gefið upp ýmsar gáttir. \n"
"gild dæmi eru 139/tcp 139/udp.\n"
"Nánari upplýsingar eru t.d. í /etc/services"

#: network/drakfirewall.pm:176
#, fuzzy, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
"Ógild gátt gefin: %s.\n"
"Rétt form er \"gátt/tcp\" eða \"gátt/udp\". \n"
"þar sem gátt er á bilinu 1 til 65535"

#: network/drakfirewall.pm:186
#, c-format
msgid "Everything (no firewall)"
msgstr "Allt (enginn eldveggur)"

#: network/drakfirewall.pm:188
#, c-format
msgid "Other ports"
msgstr "aðrar gáttir"

#: network/isdn.pm:127 network/isdn.pm:145 network/isdn.pm:157
#: network/isdn.pm:163 network/isdn.pm:173 network/isdn.pm:183
#: network/netconnect.pm:332
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN uppsetning"

#: network/isdn.pm:127
#, c-format
msgid ""
"Select your provider.\n"
"If it isn't listed, choose Unlisted."
msgstr ""
"Veldu þjónustuaðila.\n"
"Ef hann er ekki á lista, veldu 'Ekki á lista'"

#: network/isdn.pm:140 standalone/drakconnect:503
#, c-format
msgid "European protocol (EDSS1)"
msgstr "Evrópskan samskiptastaðal (EDSSI)"

#: network/isdn.pm:140
#, c-format
msgid "European protocol"
msgstr "Evrópskan samskiptastaðal"

#: network/isdn.pm:142 standalone/drakconnect:504
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr "Samskiptaregla til tengingar við umheiminn"

#: network/isdn.pm:142
#, c-format
msgid "Protocol for the rest of the world"
msgstr "Samskiptaregla til tengingar við umheiminn"

#: network/isdn.pm:146
#, c-format
msgid "Which protocol do you want to use?"
msgstr "Hvaða samskiptareglu viltu nota?"

#: network/isdn.pm:157
#, c-format
msgid "Found \"%s\" interface do you want to use it ?"
msgstr "Fann \"%s\" kort vilu nota það ?"

#: network/isdn.pm:164
#, c-format
msgid "What kind of card do you have?"
msgstr "Hvernig kort ertu með?"

#: network/isdn.pm:165
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:165
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:165
#, fuzzy, c-format
msgid "USB"
msgstr "LSB"

#: network/isdn.pm:165
#, c-format
msgid "I don't know"
msgstr "Ég veit ekki"

#: network/isdn.pm:174
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
"card.\n"
msgstr ""
"\n"
"Ef þú ert með ISA kort þá ættu gildin á næsta skjá að vera rétt.\n"
"\n"
"Ef þú hefur PCMCIA kort, þá þarft þú að vita \"irq\" og \"io\" kortsins.\n"

#: network/isdn.pm:178
#, c-format
msgid "Continue"
msgstr "Áfram"

#: network/isdn.pm:178
#, c-format
msgid "Abort"
msgstr "Hætta við"

#: network/isdn.pm:184
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "Hvert af eftirfarandi er þitt ISDN kort?"

#: network/netconnect.pm:95
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:96
#, fuzzy, c-format
msgid "Managed"
msgstr "Veldu tungumál"

#: network/netconnect.pm:97
#, fuzzy, c-format
msgid "Master"
msgstr "Mayotte"

#: network/netconnect.pm:98
#, fuzzy, c-format
msgid "Repeater"
msgstr "Endurheimta"

#: network/netconnect.pm:99
#, fuzzy, c-format
msgid "Secondary"
msgstr "auka"

#: network/netconnect.pm:100
#, fuzzy, c-format
msgid "Auto"
msgstr "Um forrit"

#: network/netconnect.pm:103 printer/printerdrake.pm:1118
#, c-format
msgid "Manual configuration"
msgstr "Handvikr uppsetning"

#: network/netconnect.pm:104
#, fuzzy, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "Sjálfvirkt IP"

#: network/netconnect.pm:106
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""

#: network/netconnect.pm:156
#, fuzzy, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch usb"

#: network/netconnect.pm:157
#, c-format
msgid "Sagem USB modem"
msgstr ""

#: network/netconnect.pm:158
#, c-format
msgid "Bewan USB modem"
msgstr ""

#: network/netconnect.pm:159
#, c-format
msgid "Bewan PCI modem"
msgstr ""

#: network/netconnect.pm:160
#, c-format
msgid "ECI Hi-Focus modem"
msgstr ""

#: network/netconnect.pm:164
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:165
#, fuzzy, c-format
msgid "Manual TCP/IP configuration"
msgstr "Handvikr uppsetning"

#: network/netconnect.pm:166
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:167
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:168
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:172
#, fuzzy, c-format
msgid "Bridged Ethernet LLC"
msgstr "Ethernet-kort"

#: network/netconnect.pm:173
#, fuzzy, c-format
msgid "Bridged Ethernet VC"
msgstr "Ethernet-kort"

#: network/netconnect.pm:174
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:175
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:176
#, c-format
msgid "PPPOA LLC"
msgstr ""

#: network/netconnect.pm:177
#, c-format
msgid "PPPOA VC"
msgstr ""

#: network/netconnect.pm:181 standalone/drakconnect:443
#: standalone/drakconnect:917
#, c-format
msgid "Script-based"
msgstr "Með skriftu"

#: network/netconnect.pm:182 standalone/drakconnect:443
#: standalone/drakconnect:917
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:183 standalone/drakconnect:443
#: standalone/drakconnect:917
#, c-format
msgid "Terminal-based"
msgstr "Með skjáhermi"

#: network/netconnect.pm:184 standalone/drakconnect:443
#: standalone/drakconnect:917
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:185
#, fuzzy, c-format
msgid "PAP/CHAP"
msgstr "CHAP"

#: network/netconnect.pm:199 standalone/drakconnect:54
#, c-format
msgid "Network & Internet Configuration"
msgstr "Staðarnets og Internet stillingar"

#: network/netconnect.pm:205
#, fuzzy, c-format
msgid "(detected on port %s)"
msgstr "fundin á tengi %s"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:207
#, fuzzy, c-format
msgid "(detected %s)"
msgstr "skynjuð %s"

#: network/netconnect.pm:207
#, fuzzy, c-format
msgid "(detected)"
msgstr "skynjuð"

#: network/netconnect.pm:209
#, fuzzy, c-format
msgid "Modem connection"
msgstr "Winmodem tenging"

#: network/netconnect.pm:210
#, c-format
msgid "ISDN connection"
msgstr "ISDN tenging"

#: network/netconnect.pm:211
#, c-format
msgid "ADSL connection"
msgstr "ADSL tenging"

#: network/netconnect.pm:212
#, c-format
msgid "Cable connection"
msgstr "Breiðbandstenging"

#: network/netconnect.pm:213
#, c-format
msgid "LAN connection"
msgstr "Staðarnetstenging"

#: network/netconnect.pm:214 network/netconnect.pm:228
#, fuzzy, c-format
msgid "Wireless connection"
msgstr "Breiðbandstenging"

#: network/netconnect.pm:224
#, c-format
msgid "Choose the connection you want to configure"
msgstr "Veldu tenginguna sem þú vilt stilla"

#: network/netconnect.pm:241
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"Við ætlum nú að fara að stilla tenginguna %s.\n"
"\n"
"\n"
"Ýttu á \"%s\" til að halda áfram."

#: network/netconnect.pm:249 network/netconnect.pm:710
#, c-format
msgid "Connection Configuration"
msgstr "Tengi-stillingar"

#: network/netconnect.pm:250 network/netconnect.pm:711
#, c-format
msgid "Please fill or check the field below"
msgstr ""

#: network/netconnect.pm:256 standalone/drakconnect:494
#: standalone/drakconnect:899
#, c-format
msgid "Card IRQ"
msgstr "Kort IRQ"

#: network/netconnect.pm:257 standalone/drakconnect:495
#: standalone/drakconnect:900
#, c-format
msgid "Card mem (DMA)"
msgstr "Kortminni (DMA)"

#: network/netconnect.pm:258 standalone/drakconnect:496
#: standalone/drakconnect:901
#, c-format
msgid "Card IO"
msgstr "Kort IO"

#: network/netconnect.pm:259 standalone/drakconnect:497
#: standalone/drakconnect:902
#, c-format
msgid "Card IO_0"
msgstr "Kort IO_0"

#: network/netconnect.pm:260 standalone/drakconnect:903
#, c-format
msgid "Card IO_1"
msgstr "Kort IO_1"

#: network/netconnect.pm:261 standalone/drakconnect:904
#, c-format
msgid "Your personal phone number"
msgstr "Þitt símanúmer"

#: network/netconnect.pm:262 network/netconnect.pm:714
#: standalone/drakconnect:905
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "Nafn þjónustuaðila (t.d. simnet.is)"

#: network/netconnect.pm:263 standalone/drakconnect:440
#: standalone/drakconnect:906
#, c-format
msgid "Provider phone number"
msgstr "Símanúmer netþjónustu"

#: network/netconnect.pm:264
#, fuzzy, c-format
msgid "Provider DNS 1 (optional)"
msgstr "Nafnamiðlari 1 (ekki krafist)"

#: network/netconnect.pm:265
#, fuzzy, c-format
msgid "Provider DNS 2 (optional)"
msgstr "Nafnamiðlari 2 (ekki krafist)"

#: network/netconnect.pm:266 standalone/drakconnect:396
#: standalone/drakconnect:462 standalone/drakconnect:911
#, c-format
msgid "Dialing mode"
msgstr "Hringihamur"

#: network/netconnect.pm:267 standalone/drakconnect:401
#: standalone/drakconnect:459 standalone/drakconnect:923
#, c-format
msgid "Connection speed"
msgstr "Tengihraði"

#: network/netconnect.pm:268 standalone/drakconnect:406
#: standalone/drakconnect:924
#, c-format
msgid "Connection timeout (in sec)"
msgstr "Tenging fellur á tíma eftir (í sek)"

#: network/netconnect.pm:271 network/netconnect.pm:717
#: standalone/drakconnect:438 standalone/drakconnect:909
#, c-format
msgid "Account Login (user name)"
msgstr "Netþjónustu-notandanafn"

#: network/netconnect.pm:272 network/netconnect.pm:718
#: standalone/drakconnect:439 standalone/drakconnect:910
#: standalone/drakconnect:944
#, c-format
msgid "Account Password"
msgstr "Netþjónustu-lykilorð"

#: network/netconnect.pm:300
#, c-format
msgid "What kind is your ISDN connection?"
msgstr "Hvaða gerðar er ISDN tengingin þín?"

#: network/netconnect.pm:301
#, c-format
msgid "Internal ISDN card"
msgstr "Innvært ISDN mótald"

#: network/netconnect.pm:301
#, c-format
msgid "External ISDN modem"
msgstr "Útvært ISDN mótald"

#: network/netconnect.pm:332
#, c-format
msgid "Do you want to start a new configuration ?"
msgstr "Viltu prófa stillingarnar?"

#: network/netconnect.pm:335
#, c-format
msgid ""
"I have detected an ISDN PCI card, but I don't know its type. Please select a "
"PCI card on the next screen."
msgstr ""
"Ég hef fundið ISDN PCI kort, en ég veit ekki hvaða tegund. Vinsamlega veldu "
"tegund á næsta skjá."

#: network/netconnect.pm:344
#, c-format
msgid "No ISDN PCI card found. Please select one on the next screen."
msgstr "Ekkert ISDN-PCI kort fannst. Vinsamlega veldu eitt á næsta skjá."

#: network/netconnect.pm:353
#, c-format
msgid ""
"Your modem isn't supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"Mótaldið þitt er ekki stutt af kerfinu.\n"
"Líttu á http://www.linmodems.org"

#: network/netconnect.pm:364
#, fuzzy, c-format
msgid "Select the modem to configure:"
msgstr "Veldu netkort"

#: network/netconnect.pm:403
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "Hvaða raðtengi er mótaldið tengt við"

#: network/netconnect.pm:427
#, fuzzy, c-format
msgid "Select your provider:"
msgstr "Veldu biðraðastjóra"

#: network/netconnect.pm:429 network/netconnect.pm:599
#, fuzzy, c-format
msgid "Provider:"
msgstr "Snið: "

#: network/netconnect.pm:481 network/netconnect.pm:482
#: network/netconnect.pm:483 network/netconnect.pm:508
#: network/netconnect.pm:525 network/netconnect.pm:541
#, fuzzy, c-format
msgid "Manual"
msgstr "handvirkt"

#: network/netconnect.pm:485
#, fuzzy, c-format
msgid "Dialup: account options"
msgstr "Innhringistillingar"

#: network/netconnect.pm:488 standalone/drakconnect:913
#, c-format
msgid "Connection name"
msgstr "Nafn tengingar"

#: network/netconnect.pm:489 standalone/drakconnect:914
#, c-format
msgid "Phone number"
msgstr "Símanúmer"

#: network/netconnect.pm:490 standalone/drakconnect:915
#, c-format
msgid "Login ID"
msgstr "Notendanafn"

#: network/netconnect.pm:505 network/netconnect.pm:538
#, fuzzy, c-format
msgid "Dialup: IP parameters"
msgstr "Viðföng"

#: network/netconnect.pm:508
#, fuzzy, c-format
msgid "IP parameters"
msgstr "Viðföng"

#: network/netconnect.pm:509 network/netconnect.pm:829
#: printer/printerdrake.pm:431 standalone/drakconnect:113
#: standalone/drakconnect:306 standalone/drakconnect:764
#, c-format
msgid "IP address"
msgstr "IP vistfang:"

#: network/netconnect.pm:510
#, fuzzy, c-format
msgid "Subnet mask"
msgstr "Staðarnetsía:"

#: network/netconnect.pm:522
#, c-format
msgid "Dialup: DNS parameters"
msgstr ""

#: network/netconnect.pm:525
#, fuzzy, c-format
msgid "DNS"
msgstr "NIS"

#: network/netconnect.pm:526 standalone/drakconnect:918
#, c-format
msgid "Domain name"
msgstr "Nafn léns"

#: network/netconnect.pm:527 network/netconnect.pm:715
#: standalone/drakconnect:919
#, c-format
msgid "First DNS Server (optional)"
msgstr "Aðal nafnamiðlari (ekki krafist)"

#: network/netconnect.pm:528 network/netconnect.pm:716
#: standalone/drakconnect:920
#, c-format
msgid "Second DNS Server (optional)"
msgstr "Vara nafnamiðlari (ekki krafist)"

#: network/netconnect.pm:529
#, fuzzy, c-format
msgid "Set hostname from IP"
msgstr "Nafn á prentara-vél eða IP"

#: network/netconnect.pm:541 standalone/drakconnect:317
#: standalone/drakconnect:912
#, c-format
msgid "Gateway"
msgstr "Gátt"

#: network/netconnect.pm:542
#, fuzzy, c-format
msgid "Gateway IP address"
msgstr "IP vistfang:"

#: network/netconnect.pm:567
#, fuzzy, c-format
msgid "ADSL configuration"
msgstr "Staðarnets-uppsetning"

#: network/netconnect.pm:567 network/netconnect.pm:746
#, fuzzy, c-format
msgid "Select the network interface to configure:"
msgstr "Veldu netkort"

#: network/netconnect.pm:568 network/netconnect.pm:748 network/shorewall.pm:77
#: standalone/drakconnect:602 standalone/drakgw:218 standalone/drakvpn:217
#, c-format
msgid "Net Device"
msgstr "Nettæki"

#: network/netconnect.pm:597
#, fuzzy, c-format
msgid "Please choose your ADSL provider"
msgstr "Veldu þér land,"

#: network/netconnect.pm:616
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""

#: network/netconnect.pm:620 network/netconnect.pm:625
#, c-format
msgid "Use a floppy"
msgstr "Nota diskling"

#: network/netconnect.pm:620 network/netconnect.pm:629
#, c-format
msgid "Use my Windows partition"
msgstr "Nota Windows disksneið"

#: network/netconnect.pm:620 network/netconnect.pm:633
#, c-format
msgid "Do it later"
msgstr ""

#: network/netconnect.pm:640
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr ""

#: network/netconnect.pm:647
#, c-format
msgid "Firmware copy succeeded"
msgstr ""

#: network/netconnect.pm:662
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"Þú þarft Alcatel míkrókóða uppfærslu.\n"
"sæktu hana á:\n"
"%s\n"
"og afritaðu mgmt.o á /usr/share/speedtouch"

#: network/netconnect.pm:719
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:720
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:721
#, fuzzy, c-format
msgid "Encapsulation :"
msgstr "Dulritunarlykill"

#: network/netconnect.pm:736
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
"problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:753
#, fuzzy, c-format
msgid "No wireless network adapter on your system!"
msgstr "Ekkert nettengi á vélinni þinni!"

#: network/netconnect.pm:754 standalone/drakgw:240 standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "Ekkert nettengi á vélinni þinni!"

#: network/netconnect.pm:766
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the "
"Internet.\n"
"Simply accept to keep this device configured.\n"
"Modifying the fields below will override this configuration."
msgstr ""

#: network/netconnect.pm:784
#, fuzzy, c-format
msgid "Zeroconf hostname resolution"
msgstr "Zeroconf Heiti vélar"

#: network/netconnect.pm:785 network/netconnect.pm:816
#, fuzzy, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "Stilli nettæki %s"

#: network/netconnect.pm:786
#, c-format
msgid ""
"The following protocols can be used to configure an ethernet connection. "
"Please choose the one you want to use"
msgstr ""

#: network/netconnect.pm:817
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"Sláðu inn IP uppsetningu þessarar vélar. Hver færsla\n"
"á að vera IP tala rituð með punkt á milli.\n"
"(dæmi 1.2.3.4)"

#: network/netconnect.pm:824
#, c-format
msgid "Assign host name from DHCP address"
msgstr "Skilgreina nafn vélar frá DHCP vistfangi"

#: network/netconnect.pm:825
#, c-format
msgid "DHCP host name"
msgstr "DHCP vélarheiti:"

#: network/netconnect.pm:830 standalone/drakconnect:311
#: standalone/drakconnect:765 standalone/drakgw:313
#, c-format
msgid "Netmask"
msgstr "Netsía"

#: network/netconnect.pm:832 standalone/drakconnect:389
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr ""

#: network/netconnect.pm:833 standalone/drakconnect:390
#, c-format
msgid "Network Hotplugging"
msgstr "Netstillingar útskifanlegra tækja"

#: network/netconnect.pm:834 standalone/drakconnect:384
#, c-format
msgid "Start at boot"
msgstr "Ræsa við kerfisræsingu"

#: network/netconnect.pm:836 standalone/drakconnect:768
#, c-format
msgid "DHCP client"
msgstr "DHCP biðlari"

#: network/netconnect.pm:846 printer/printerdrake.pm:1349
#: standalone/drakconnect:569
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP vistfang á að vera á sniðinu 1.2.3.4"

#: network/netconnect.pm:849
#, c-format
msgid "Warning : IP address %s is usually reserved !"
msgstr ""

#: network/netconnect.pm:879 network/netconnect.pm:908
#, fuzzy, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "Sláðu inn nafn vélar eða IP."

#: network/netconnect.pm:882 standalone/drakconnect:355
#, fuzzy, c-format
msgid "Operating Mode"
msgstr "F. sérfræðinga"

#: network/netconnect.pm:884 standalone/drakconnect:356
#, c-format
msgid "Network name (ESSID)"
msgstr ""

#: network/netconnect.pm:885 standalone/drakconnect:357
#, fuzzy, c-format
msgid "Network ID"
msgstr "Net"

#: network/netconnect.pm:886 standalone/drakconnect:358
#, c-format
msgid "Operating frequency"
msgstr ""

#: network/netconnect.pm:887 standalone/drakconnect:359
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:888 standalone/drakconnect:360
#, c-format
msgid "Bitrate (in b/s)"
msgstr ""

#: network/netconnect.pm:894
#, c-format
msgid ""
"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
"frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:898
#, c-format
msgid ""
"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
"enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:911 standalone/drakconnect:371
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:912
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that "
"the\n"
"channel is clear. This adds overhead, but increase performance in case of "
"hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, "
"fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:919 standalone/drakconnect:372
#, fuzzy, c-format
msgid "Fragmentation"
msgstr "Leikja-(vinnu)stöð"

#: network/netconnect.pm:920 standalone/drakconnect:373
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:921
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
"as the hostname).\n"
"\n"
"See iwpconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:928 standalone/drakconnect:374
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:929
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:937 standalone/drakconnect:375
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:938
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless "
"network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed "
"to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to "
"use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:965
#, c-format
msgid ""
"No ethernet network adapter has been detected on your system.\n"
"I cannot set up this connection type."
msgstr ""
"Ekkert netkort hefur fundist á tölvunni þinni, Ég get ekki\n"
"sett upp þessa tengingu."

#: network/netconnect.pm:969 standalone/drakgw:254 standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "Veldu netkort"

#: network/netconnect.pm:970
#, c-format
msgid ""
"Please choose which network adapter you want to use to connect to Internet."
msgstr "Veldu hvaða netkort þú notar til að tengjast Internetinu."

#: network/netconnect.pm:991
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"Sláðu inn heiti vélarinnar.  Vélarheitið þarf að vera fullt \n"
"heiti, t.d. odinn.grimsey.is  Þú mátt líka slá inn IP \n"
"vistfang gáttarinnar ef þú veist hvað það vistfang er.\n"
"Gáttin gefur þér aðgang út úr staðarnetinu (t.d. á Internetið)."

#: network/netconnect.pm:995
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:997
#, fuzzy, c-format
msgid "Host name (optional)"
msgstr "Stilla nafn á vél"

#: network/netconnect.pm:997
#, c-format
msgid "Host name"
msgstr "Heiti vélar"

#: network/netconnect.pm:998
#, fuzzy, c-format
msgid "DNS server 1"
msgstr "Nafnamiðlari"

#: network/netconnect.pm:999
#, fuzzy, c-format
msgid "DNS server 2"
msgstr "Nafnamiðlari"

#: network/netconnect.pm:1000
#, fuzzy, c-format
msgid "DNS server 3"
msgstr "Nafnamiðlari"

#: network/netconnect.pm:1001
#, fuzzy, c-format
msgid "Search domain"
msgstr "NIS lén"

#: network/netconnect.pm:1002
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1003
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "Gátt (þ.e. %s)"

#: network/netconnect.pm:1005
#, c-format
msgid "Gateway device"
msgstr "Gátt (tækið)"

#: network/netconnect.pm:1014
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "Vistfang DNS-þjóns á að vera á sniðinu 1.2.3.4"

#: network/netconnect.pm:1019 standalone/drakconnect:571
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Vistfang Gáttar á að vera á sniðinu 1.2.3.4"

#: network/netconnect.pm:1030
#, c-format
msgid ""
"Enter a Zeroconf host name which will be the one that your machine will get "
"back to other machines on the network:"
msgstr ""

#: network/netconnect.pm:1031
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf Heiti vélar"

#: network/netconnect.pm:1034
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr "Zerocont vélarheiti má ekki innihalda ."

#: network/netconnect.pm:1044
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"Þú hefur skilgreint nokkrar leiðir til að tengjast Internetinu.\n"
"Veldi þá sem þú vilt nota.\n"
"\n"

#: network/netconnect.pm:1046
#, c-format
msgid "Internet connection"
msgstr "Internettenging"

#: network/netconnect.pm:1054
#, c-format
msgid "Configuration is complete, do you want to apply settings ?"
msgstr "Uppsetningu lokið, viltu virkja stillingar?"

#: network/netconnect.pm:1070
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "Viltu ræsa nettengingarnar þegar kerfi ræsir?"

#: network/netconnect.pm:1094
#, c-format
msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr "Það þarf að endurræsa netið, viltu endurræsa það núna?"

#: network/netconnect.pm:1100 network/netconnect.pm:1165
#, c-format
msgid "Network Configuration"
msgstr "Netstillingar"

#: network/netconnect.pm:1101
#, c-format
msgid ""
"A problem occured while restarting the network: \n"
"\n"
"%s"
msgstr ""
"Vandamál kom upp við enduræsingu nets: \n"
"\n"
"%s"

#: network/netconnect.pm:1110
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "Viltu reyna að tengjast Internetinu núna?"

#: network/netconnect.pm:1118 standalone/drakconnect:958
#, c-format
msgid "Testing your connection..."
msgstr "Prófa tenginguna þína..."

#: network/netconnect.pm:1134
#, c-format
msgid "The system is now connected to the Internet."
msgstr "Kerfið er nú tengt Internetinu"

#: network/netconnect.pm:1135
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "Af öryggisástæðum verður aftengt núna."

#: network/netconnect.pm:1136
#, c-format
msgid ""
"The system doesn't seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"Kerfið virðist ekki vera tengt við Internetið.\n"
"reyndu að endurstilla tenginguna."

#: network/netconnect.pm:1150
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"Til hamingju, staðarnets og Internets uppsetningu er lokið.\n"
"\n"

#: network/netconnect.pm:1153
#, c-format
msgid ""
"After this is done, we recommend that you restart your X environment to "
"avoid any hostname-related problems."
msgstr ""
"Eftir að þessu er lokið mælum við með að þú  endurræsir X umhverfið til að "
"koma í veg fyrir nafna-tengd vandamál."

#: network/netconnect.pm:1154
#, c-format
msgid ""
"Problems occured during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection doesn't "
"work, you might want to relaunch the configuration."
msgstr ""

#: network/netconnect.pm:1166
#, c-format
msgid ""
"Because you are doing a network installation, your network is already "
"configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your "
"Internet & Network connection.\n"
msgstr ""

#: network/network.pm:314
#, c-format
msgid "Proxies configuration"
msgstr "Seluppsetning"

#: network/network.pm:315
#, c-format
msgid "HTTP proxy"
msgstr "HTTP sel:"

#: network/network.pm:316
#, c-format
msgid "FTP proxy"
msgstr "FTP Sel:"

#: network/network.pm:319
#, c-format
msgid "Proxy should be http://..."
msgstr "Sel ætti að vera http://..."

#: network/network.pm:320
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "Slóð ætti að byrja á 'ftp' eða 'http'"

#: network/shorewall.pm:26
#, c-format
msgid "Firewalling configuration detected!"
msgstr "Fann eldveggsuppsetningu!"

#: network/shorewall.pm:27
#, c-format
msgid ""
"Warning! An existing firewalling configuration has been detected. You may "
"need some manual fixes after installation."
msgstr ""

#: network/shorewall.pm:70
#, c-format
msgid ""
"Please enter the name of the interface connected to the "
"internet.              \n"
"                \n"
"Examples:\n"
"                ppp+ for modem or DSL connections, \n"
"                eth0, or eth1 for cable connection, \n"
"                ippp+ for a isdn connection.\n"
msgstr ""

#: network/tools.pm:207
#, c-format
msgid "Insert floppy"
msgstr "Settu diskling í drif"

#: network/tools.pm:208
#, c-format
msgid ""
"Insert a FAT formatted floppy in drive %s with %s in root directory and "
"press %s"
msgstr ""
"Settu FAT forsniðinn diskling í drif %s með %s í rótarmöppu og ýttu á %s"

#: network/tools.pm:209
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "Diskettuvilla, get ekki tengt %s"

#: partition_table.pm:642
#, c-format
msgid "mount failed: "
msgstr "tókst ekki að tengja: "

#: partition_table.pm:747
#, c-format
msgid "Extended partition not supported on this platform"
msgstr ""

#: partition_table.pm:765
#, c-format
msgid ""
"You have a hole in your partition table but I can't use it.\n"
"The only solution is to move your primary partitions to have the hole next "
"to the extended partitions."
msgstr ""
"Það er gat í sneiðatöflunni þinni sem ekki er hægt að nota.\n"
"Eina lausnins er að færa aðalsneiðar svo að gatið verði við hliðina á "
"viðbótasneið"

#: partition_table.pm:852
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "Villa við lestur úr skránni %s: %s"

#: partition_table.pm:854
#, c-format
msgid "Bad backup file"
msgstr "Skemmd afritsskrá"

#: partition_table.pm:874
#, c-format
msgid "Error writing to file %s"
msgstr "Villa við að skrifa í skrána %s"

#: partition_table/raw.pm:181
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted "
"data."
msgstr ""
"Eitthvað slæmt er að gerast á disknum þínum.\n"
"Féll á prófi þar sem athugað var samræmi á \n"
"gögnum á disknum\n"
"Það þýðir að allt sem þú skrifar á diskinn endar á\n"
"óvissum stað 'einhverstaðar' sem ruglar málin en meir!"

#: pkgs.pm:24
#, c-format
msgid "must have"
msgstr "verð að fá"

#: pkgs.pm:25
#, c-format
msgid "important"
msgstr "áríðandi"

#: pkgs.pm:26
#, c-format
msgid "very nice"
msgstr "mjög þægilegt"

#: pkgs.pm:27
#, c-format
msgid "nice"
msgstr "þægilegt"

#: pkgs.pm:28
#, c-format
msgid "maybe"
msgstr "kannski"

#: printer/cups.pm:87
#, c-format
msgid "(on %s)"
msgstr "(á %s)"

#: printer/cups.pm:87
#, c-format
msgid "(on this machine)"
msgstr "(á þessarri vél)"

#: printer/cups.pm:99 standalone/printerdrake:197
#, c-format
msgid "Configured on other machines"
msgstr "Stillt á öðrum vélum"

#: printer/cups.pm:101
#, c-format
msgid "On CUPS server \"%s\""
msgstr "Á CUPS þjóni \"%s\""

#: printer/cups.pm:101 printer/printerdrake.pm:3784
#: printer/printerdrake.pm:3793 printer/printerdrake.pm:3934
#: printer/printerdrake.pm:3945 printer/printerdrake.pm:4157
#, c-format
msgid " (Default)"
msgstr " (Sjálfgefið)"

#: printer/data.pm:21
#, c-format
msgid "PDQ - Print, Don't Queue"
msgstr "PDQ - Print, Don't Queue"

#: printer/data.pm:22
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:33
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:34
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:55
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:56
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:81
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - Common Unix Printing System"