2000-05-09  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (kdeicons_postinstall): the URL link to doc must
	be $lang/index.html, not only $lang.

	* standalone/mousedrake: add handling of XF86Config-4

	* any.pm (setupBootloader): fix bug (was adding 2 glob_'s)

2000-05-08  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): move the touch of some files here to please linuxconf
	
	* install2.pm (miscellaneous): s/KBD/KEYBOARD/

	* lilo.pm (install_grub): don't keep symlinks for reiserfs
	* lilo.pm (suggest): allow grub everytime now (not only if !reiserfs)

	* install_any.pm (getHds): default mount point for windobe in
	lowercased for StartOffice(!)

2000-05-08  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: Fixed Brazilian keyboard (.br); added
	  Iranian (.ir), Arabic (.ar) and new Lithuanian (.lt_new) keyboards
	* keyboard.pm: Added new Lithuanian keyboard and changed the
	  string for brazilian ABNT-2 to state more clearly its ABNT nature
	  (it is not a standard PC keyboard; it uses some different keycodes)

2000-05-07  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (choosePackages): return availableCorrected
	instead of available

	* pkgs.pm (correctSize): add 18MB for full multi-cd (many hdlist's)

	* modules.pm (text2driver): same as text2lang below
	* keyboard.pm (text2keyboard): same as text2lang below
	* lang.pm (text2lang): replace the while (... each) by a foreach
	(keys) (because each is dangerous if loop is exited)

	* install_steps_interactive.pm (selectKeyboard): better handling
	of multiple langs question.

	* ftp.pm (new): Timeout set to 60 (seconds), was default (120)

	* install_steps_interactive.pm (setup_thiskind): remove ide-*
	from modules displayed as loaded.

2000-05-06  Pixel  <pixel@mandrakesoft.com>

	* fsedit.pm (check_mntpoint): verify that standard mntpoints (/
	/usr) are not on not trueFS

	* any.pm (setupBootloader): add $prefix for the 2 glob_'s

2000-05-07  Pablo Saratxaga <pablo@mandrakesoft.com>

	* share/keyboards.tar.bz2: added Ukrainian keyboard xmodmap.ua

2000-05-06  Pablo Saratxaga <pablo@mandrakesoft.com>

	* printerdrake.pm: fixed English error

2000-05-05  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm (monitorConfiguration): remove the special case
	for fbdev.

	* install_steps_interactive.pm (setup_thiskind): replace return by
	next in case load_module fails.

	* install_steps_gtk.pm (selectInstallClass1): translate Install/Upgrade

	* Xconfigurator.pm (cardConfiguration): force xf4 for rage 128's
	* Xconfigurator.pm (testFinalConfig): force $bad_card for xf4

	* pkgs.pm (correctSize): updated for 7.1

	* install_any.pm (getAvailableSpace): move the removing of
	$minAvailableSize here.

2000-05-04  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (configurePrinter): give clicked to printerConfig

	* interactive.pm (ask_from_entries_ref): set default val if not_edit

	* interactive_newt.pm (ask_from_entries_refW): remove setting of
	default val. Now done in interactive::ask_from_entries_ref

	* interactive_gtk.pm (ask_from_entries_refW): handle empty value

	* modules.pm (read_already_loaded): ensure that already loaded
	modules are put in %loaded.
	* modules.pm (load_ide): add loading if ide-probe-mod (for new kernel)

	* lilo.pm (install_lilo): truncate label's to 15 chars

	* install_any.pm (generate_ks_cfg): fix missing space
	* install_any.pm (generate_ks_cfg): fix bug for nfs comand

	* install2.pm: get rid of autoformat
	* install_steps.pm (choosePartitionsToFormat): get rid of autoformat

2000-05-03  Pixel  <pixel@mandrakesoft.com>

	* any.pm (setupBootloader): replace ask_many_from_list by
	ask_from_list for bootloader choice

	* services.pm (drakxservices): stop immediately service if removed

	* install_steps.pm (configureNetwork): replaced dhcpxd by dhcpcd
	* install_steps.pm (afterInstallPackages): touch some files to
	please linuxconf

2000-05-03  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: updated min size, fixed kppprc generation.
	* install_any.pm: make sure postinstall-rpm is here before
	erasing (avoid error on reboot only).

2000-05-02  Pixel  <pixel@mandrakesoft.com>

	* raid.pm (format_part): don't call raid::make if part is already
	formatted (as raidstop fails)

	* Xconfigurator_consts.pm: Rage128 and 3dfx are not available any
	more	

	* install_steps_interactive.pm (setup_thiskind): make insmod'ing
	fail a simple warning.

	* Xconfigurator.pm (readMonitorsDB): adapt to new MonitorsDB
	* share/MonitorsDB: take new one from RedHat

	* standalone/drakboot: added kfloppy

	* g_auto_install: add $dir/lib to LD_LIBRARY_PATH (it was silly
	not to have it)

2000-05-01  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setRootPassword): remove
	NIS_server, use NIS instead
	* install_any.pm (setAuthentication): remove NIS_server, use NIS instead

	* standalone/rpmdrake (AddMedia): hdlist.cz2 instead of hdlist

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps.pm (afterInstallPackages): fix yet another bug for
	ttf from windobe handling

	* install_steps_interactive.pm (selectInstallClass): hide beginner
	mode in corporate. Display special help.

2000-04-29  Pablo Saratxaga <pablo@mandrakesoft.com>

	* my_gtk.pm: added call to Gtk->init; that makes 16 bit locales
	text to be properly aligned (reported by Craig Chang
	<craig_chang@taipei.siscomm.com.tw>)
	* common.pm: now that po handling is correct, I changed the order
	of reading variables so that it follows the standards ($LANGUAGE first)
	* share/fonts.tar.bz2, lang.pm: added an 8pt font for cp1251

2000-04-28  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps*.pm: added support for selection of package during
	upgrade the same way it is done for installation. added check of
	minimal size, abort else (at least let the user know about :-)
	fixed crypto if no network interface available.
	* install2.pm: fixed problem during upgrade that lost network
	configuration.

2000-04-28  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_raw): don't call commands::insmod, do it in
	place. Merge with load_multi

	* install_steps.pm (afterInstallPackages): fix windobe ttfonts
	symlinking	

	* Xconfigurator.pm (cardConfiguration): load module agpgart for
	i810
	
	* install_any.pm (getHds): changed the mount point setting for
	windows partitions as device_windobe is not unique

2000-04-27  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_steps_window): changed to adapt to
	new hidden format

	* install2.pm (@installSteps): changed the way hidden is handled.
	Now it is a true perl expression (great power now)

	* install_steps_gtk.pm (selectInstallClass1): update steps window
	before asking normal/devel/server. Nicer!

	* install_steps_interactive.pm (configureNetwork): when "Cancel"
	pressed at network interface configuration do not skip all
	configuration.	

2000-04-26  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm (pppConfig): modified a lot, removed template
	file for ifcfg and chat file.

2000-04-26  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): use a fix width for
	the tree column (so that the checkbox are always visible without
	scrolling)	

	* standalone/drakboot: drakfloppy and gfloppy are X only, no need
	to propose them in console
	
	* install_any.pm (relGetFile): added auto_inst to files to get
	from Mandrake/base

	* install2.pm (main): changed auto_inst behaviour

	* standalone/adduserdrake: fix a bug (s/$o/$in/g)

	* interactive_newt.pm (ask_from_entries_refW): now handling
	complete/changed/focus_out callbacks (at least more than before)	

	* Newt/Newt.xs: added rough callback handling

2000-04-25  Fran�ois Pons  <fpons@mandrakesoft.com>

	* printerdrake.pm: added support for PPA more easily, allow
	printers entry using ppa driver event if pnm2ppa not installed,
	install it if neccessary after.
	* network.pm, install_steps.pm, install_steps_interactive.pm:
	added support for stoping a network interface, usefull for ppp0 to
	avoid using it too long.
	* install_steps.pm: fixed missing local on pap_secrets file.

2000-04-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install): moved the generation of the keytable here. It
	is used by both lilo & grub (lilo is not always installed as was
	assumed)	

	* common.pm (formatAlaTeX): remove bounding spaces

	* pkgs.pm (setSelectedFromCompssList): remove the hack for min
	mark 25 in beginner
	* install_steps_interactive.pm (choosePackages): set $min_mark to
	25 in beginner

2000-04-24  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (setupXfree): add a yesorno
	question for choosing between XF4 and XF3 in expert

	* install_steps_gtk.pm (choosePackagesTree): enlarge the tree window

	* install_any.pm (update_userkderc): make sure uid and gid are kept

	* diskdrake.pm (Create): add Extended_0x85 as a choice for expert

	* partition_table.pm (add_extended): handle a 3rd arg,
	$extended_type to tell which kind of extended partition is wanted
	* partition_table.pm (adjust_main_extended): in non-expert,
	automatically set extended to linux-extended if there's only
	linux-type partitions.	

2000-04-22 Pablo Saratxaga <pablo@madrakesoft.com>

	* install_steps_interactive.pm: s/Mb/MB/ as 'b' is symbol for bit
	  and not for byte. RAM is expressed in megabytes -> MB

2000-04-19  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: fixed crazy mutli CD manipulation.
	* printer.pm: fixed wrong prototype of print_pages.
	* install2.pm: set version to 7.1 for crypto stuff.
	* crypto.pm: commented ackbar crypto site.

2000-04-17  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (suggest): in failsafe, runlevel ASKRUNLEVEL (handled by
	linuxconf)	

2000-04-14  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePartitionsToFormat): don't
	ask about checking bad blocks for reiserfs, cuz not handled

	* fs.pm (mount): reiserfs handling
	* fs.pm (format_reiserfs): added
	* fs.pm (write_fstab): add option "notail" for reiserfs if
	the partition holds the kernel (/boot or /)

	* partition_table.pm (isTrueFS): added, replaces most occurences
	of isExt2

2000-04-12  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2.pm: force installation step if package have been
	selected on step choose packages.
	* install_any.pm: protected against die in perl (setstep or
	theme_changed).

2000-04-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* resize_fat: added some limits verification.
	* interactive_gtk.pm: corrected swap of arg with help adding.

2000-04-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* interactive_gtk.pm, my_gtk.pm: added tooltips for ask_from_list,
	which is used by printerdrake only. drops key bindings.

2000-04-07  Fran�ois Pons  <fpons@mandrakesoft.com>

	* tools/serial_probe: obsoleting pnp_serial which is now replaced
	by this one, taken from kudzu, really faster and probe all serial
	devices at one time. modified to probe correctly modem :-)
	* mouse.pm: updated to use serial_probe interface of
	detect_devices.pm.
	* detect_devices.pm: modified to use serial_probe, cache probed
	devices to avoid reprobing.

2000-04-06  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm, install_steps.pm: added support
	for peerdns options of ppp, so removed dns address unless expert.

2000-04-05  Fran�ois Pons  <fpons@mandrakesoft.com>

	* crypto.pm, install_steps_interactive.pm, install2.pm,
	install_steps.pm: added crypto stuff to support hdlist-crypto.cz2
	and depslist-crypto. dependancies are not supported but with a
	simpler format of depslist file where closure are not done and
	only package name are used for dependancies.
	* pkgs.pm: added better support for multi CD manipulation,
	including selection and refus.

2000-04-04  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm: modified selection packages from compssList by
	incremental selection, much more quickly.
	added selected medium for selecting a package.
	* install_any.pm: refused media hash transfered to selected value
	of media table.
	@needToCopy list should only have package of default medium.

2000-04-03  Pixel  <pixel@mandrakesoft.com>

	* fs.pm (format_ext2): add options "-b 1024 -O none" for alpha

2000-03-31  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_gtk.pm: made changeMedium sub modification
	permanent.
	* pkgs.pm: modified upgrade to avoid use of header.

2000-03-31  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: some more choices for PPC keyboards

2000-03-30  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install2pm: added eval around loading af_packet and postinstall
	copy of RPMS.
	* devices.pm: added /dev/kdb for SPARC.
	* install_any.pm: modified multi CD management, postinstall copy
	of RPMS.
	* install_steps_gtk.pm: added support for Xsun server for SPARC.
	* install_steps_interactive.pm: added multi CD dialog box for
	selecting CD available. Serialized ethernet configuration and ppp
	configuration.
	* pkgs.pm: added check for infinite recursion for bad depslist.
	* printer.pm: better test for reparse of printerdb.
	* Xconfigurator.pm: added support for Xsun server for SPARC.

2000-03-30  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (choosePackagesTree): enhance tree selection

2000-03-29  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (wait_messageW): add some padding (nicer)

	* install_steps_interactive.pm (generateAutoInstFloppy): created,
	creates a floppy for auto installs.

	* install_any.pm (generate_ks_cfg): created, generates stage1
	ks.cfg file

	* share/po/DrakX.pot: added special comment for grub entry

2000-03-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (selectKeyboard): sort langs for
	many-lang install

	* mouse.pm (write): add WHEEL telling if a wheel mouse is there

2000-03-28  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: added entries for all three Armenian keyboards

2000-03-26  Pixel  <pixel@mandrakesoft.com>

	* install_any.pm (install_urpmi): full support for multi-hdlist's	

	* pkgs.pm (extractHeaders): look for hdlist in /tmp instead of
	$prefix/var/lib/urpmi
	* pkgs.pm (psUsingHdlists): put hdlist's in /var/lib/urpmi with a
	fake name. Access via /tmp/$hdlist is given for non-fake name

	* detect_devices.pm (hasHPT): return undef if no htp (silly me :-/)

2000-03-25  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm: updated to the new format of entries. It was an hash.
	Now the key is field kernel_or_dev, and entries is an array.
	
	(get): added, it returns the entry using a kernel
	   (needed because entries is no more a hash)

	* install_steps_interactive.pm (setupLILO): adapted to the new format

	* Xconfigurator.pm (write_XF86Config): basic XF86Config-4 handling	

	* fsedit.pm (suggest_part): if suggested part contains a field
	"hd", ensure the partition is created on this hard drive

	* install2.pm (main): before leaving installation, remove
	/var/lib/urpmi if urpmi not installed	

	* diskdrake.pm (Resize): ext2resize to size $part->{size} instead
	of $size

2000-03-24  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (hasHPT): added. Now nice handling of hpt366
	(ultra66) without rebooting and making special floppy :)

	* lilo.pm (install_grub): much better grub configuration (better
	than lilo's :pp)

	* install_steps.pm (setupBootloaderBefore): remove entry floppy
	for security > 3

2000-03-23  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (selectMouse): added, takes care of telling
	the X server if the user changed the mouse type. Only done if
	a serial mouse is chosen.

	* install_steps_newt.pm (doPartitionDisks): add a call to

	* mouse.pm (write): added "device=" in etc/sysconfig/mouse for
	devfs (it looses the symlink /dev/mouse)

2000-03-22  Pixel  <pixel@mandrakesoft.com>

	* pci_probing/pcitable: replace Server:Rage128 by proper XFree entry

2000-03-20  Fran�ois Pons  <fpons@mandrakesoft.com>

	* detect_devices.pm, fs.pm, install_any.pm: added supports for
	LS-120 floppy drive and icons on desktop of KDE (untested).
	* printer.pm, printerdrake.pm: added supports for PPA interface in
	new rhs-printfilters, always enable "Print text as postscript"
	option for such printers.

2000-03-20  Pablo Saratxaga <pablo@mandrakesoft.com>

	* keyboard.pm: changed XKB name for Swedish keyboard
	  changed XKB names for Russian and German keyboards
	  added a choice for "Croatian" keyboard
	* share/compss{,List}: added various new locales-*, ispell-* 
	  and netscape-* files. changed ppa to pnm2ppa.

2000-03-17  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps.pm: added setup for all configured queue.
	* install_steps_interactive.pm: modified for retrieving packages
	or current configuration.
	* printer.pm: correction, tested retrieve of printer
	configuration without printtool comments in printcap file: added
	update of entry according to gsdriver used (untested again).
	* printerdrake.pm: better handling of cancel, manage of multiple
	queue definition together (as lp|My printer).

2000-03-16  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_steps_interactive.pm: moved in printerdrake.pm the test
	of printer usage.
	* printerdrake.pm: heavy modification to handle multiple queue,
	corrected some bugs too, added much more features as printtool.
	* printer.pm: added more features for filter, allow printer to be
	retrieved without help of printtool id in printcap file (untested).

2000-03-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Loopback): handling of the file loopback: test
	existence of the file and take its size.

2000-03-14  Fran�ois Pons  <fpons@mandrakesoft.com>

	* install_any.pm: corrected for duplicate file on other CD.

2000-03-13  Pixel  <pixel@mandrakesoft.com>

	* detect_devices.pm (floppies): don't return hash but the device name

2000-03-13  Fran�ois Pons  <fpons@mandrakesoft.com>

	* pkgs.pm, install_any.pm: small correction for multiple media
	installation.
	* tools/syncrpms: added for handling synchronisation of multiple source
	rpm directories (and multiple target), include cleaning.
	* tools/closurepkgs: tools to get rpm that may be installed by DrakX
	after normal packages installation (printer, network, X11...), may
	be used to duplicate on other CD some important stuff of the first
	one.

2000-03-12  Pixel  <pixel@mandrakesoft.com>

	* install_steps_interactive.pm (choosePackages): compute the
	max_size very simply (sum of all package sizes), otherwise too costly

	* pkgs.pm (install): call cleanHeaders at the end
	* pkgs.pm (cleanHeaders): created

	* install2.pm (miscellaneous): /etc/msec/init.sh is now
	/usr/sbin/msec (yoann thanks for not telling :pp)

	* pkgs.pm (install): remove the $prefix of mountpoints for not
	enough room to install error message

2000-03-11  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_create_window): add callback on focus to
	ensure_focus. The result is no more 3 focus states with 2 buttons.

	* interactive_gtk.pm (ask_from_treelistW): better keyboard handling

	* raid.pm (make): check the result of mkraid. Suggest raidtools
	are missing in standalone diskdrake

	* devices.pm (set_loop): created, searches for an available
	loopback and sets the file to it

	* lilo.pm (dev2grub): fixed a missing slash

	* interactive_gtk.pm (wait_message_nextW): do not update if same
	message, otherwise silly gtk won't do anything and we'll wait
	forever :(

2000-03-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account multiple media
	installation.

2000-03-10  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (@install_classes): cleanup, no more i18n (is now in
	install_steps_interactive), remove old entries

2000-03-09  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): don't add alias block-major-11 in every case
	* modules.pm (add_alias): special case oss (post-installs modprobe snd-pcm-oss)

	* fs.pm (format_*): move the @options before the device

	* loopback.pm: created, added a lot of stuff for loopback in
	diskdrake.pm, fs.pm...

2000-03-08  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm: %type2fs replaced ox402 by 0x402

	* detect_devices.pm (cdroms): fix "scd" (should be "scd0")

	* install_any.pm (install_urpmi): update for new hdlist.cz2

2000-03-07  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (ask_from_treelistW): s/focus_row/set_focus_row/

	* install_steps_interactive.pm (addUser): force add a normal user
	for security 4

2000-03-05  Pixel  <pixel@mandrakesoft.com>

	* my_gtk.pm (_ask_from_list): replace focus_row with set_focus_row
	(tis the Gtk-Perl 0.7002 was of doing)

2000-03-04  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (write_conf): add ide-floppy to the modprobes of
	post-install supermount

2000-03-03  Pixel  <pixel@mandrakesoft.com>

	* commands.pm (ps): add RSS to ps command

2000-03-02 Adam Lebsack <adam@mandrakesoft.com>

	* mouse.pm: added mac mouse detection to mouse::detect.
	* detect_devices.pm: added a routine to probe /dev/usbmouse on macs.

2000-03-01  Fran�ois Pons  <fpons@mandrakesoft.com>

	* *.pm: heavy modification to take into account smaller
	transaction during installation.
	still a lot of test to perform, no provides updated currently and
	building of hdlist.cz2 and depslist.ordered need old files...
	nothing done for hdlist.gz during post installation, but
	hdlist.cz2 is already copied in /var/lib/urpmi [and is used during
	installation of packages as extract_archive need a true file].

2000-03-01  Pixel  <pixel@mandrakesoft.com>

	* lilo.pm (install_grub): creation

	* network.pm (write_interface_conf): ONBOOT = !pcmcia

	* install_steps_gtk.pm (new): more intelligent SIGCHLD handler

2000-02-29  Pixel  <pixel@mandrakesoft.com>

	* modules.pm: moved common network stuff from "net" to "network"
	(modules like nfs lockd...)

	* fs.pm (write_fstab): moved the sort to the right place

	* services.pm (drakxservices): chkconfig --list is i18n'ed :(
	set LANGUAGE=C before

	* partition_table_raw.pm (get_geometry): geom{cylinders} must not
	be a decimal value :)

	* install_steps_gtk.pm (create_logo_window): set_name logo for
	logo window
	* share/install.rc: force disabling of background image theme

	* install_steps_gtk.pm (enteringStep): add step information for
	console 1

	* any.pm (addKdmIcon): new function
	* install_steps.pm (addUser): handle field icon
	* install_steps_interactive.pm (addUser): add choice of kdm icon
	* standalone/adduserdrake: add choice of kdm icon

	* diskdrake.pm (ask_all_data...): change for easier i18n

	* install_steps.pm (miscellaneous): add CLEAN_TMP handling
	(need cleaning?)
	* install_steps_interactive.pm (miscellaneous): add CLEAN_TMP
	option in expert
	* install2.pm (miscellaneous): add CLEAN_TMP option for
	/etc/sysconfig/system	

	* install_steps_interactive.pm (miscellaneous): forbidden
	useSupermount if high security.	

	* mouse.pm (detect): fix bug (ttyS instead of ttyS0)

2000-02-28  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): do not use "Generic VGA" for
	svga and accel. SVGA also wants 16 bpp. added ugly modeline for
	800x600.	

	* partition_table_raw.pm (get_geometry): when the
	HDIO_GET_IDENTITY fails, defaults to what GETGEO gave

	* install2.pm (main): use modules::load_multi to increase boot
	start time

	* modules.pm (load_multi): added this function for loading many
	modules at once.

	* install_steps_gtk.pm (new): increase time before timeout

	* detect_devices.pm (cdroms): change the device associated with
	ide-burners (hdX -> scdX). Problem is how to know the X in scdX :(	

	* modules.pm (write_conf): sort scsi_hostadapter's

2000-02-27  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): load ide-probe and the like in 'prereq' type
	so no aliases are added to conf.modules

2000-02-25  Pixel  <pixel@mandrakesoft.com>

	* devices.pm (make): small code cleanup

	* partition_table_raw.pm (adjustEnd): more explicit error message

	* fsedit.pm (allocatePartitions): fix a bug (size was getting too
	big after each allocation) making adjustEnd cry

2000-02-24  Pixel  <pixel@mandrakesoft.com>

	* interactive_gtk.pm (new): added the "new" method to initialize
	windowheight for isStandalone

	* install_steps_gtk.pm (new): returns undef in case no X server
	works	

	* install2.pm (main): moved the ejectCdrom from install_steps::END
	to here
	* install2.pm (main): fix the $SIG{SEGV} handler
	* install2.pm (main): added a "try again" in text install if the
	"new" fails

	* install_steps_interactive.pm (createBootdisk): fix an error for
	non fdX choice of floppy drive
	
	* install_steps_interactive.pm (setup_thiskind): remove the
	"defined @l"

2000-02-23  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (%suggestedPartitions): remove any /boot entries
	* install2.pm (selectInstallClass): removed the special code to
	/boot entries from suggestedPartitions for on non-intel (and it
	was buggy :)
	* fsedit.pm (@suggestions): remove the /boot entry
	* fsedit.pm (check_mntpoint): remove the 1024 cylinder check	
	* fsedit.pm (suggest_part): remove the 1024 cylinder special case

	* install_steps_interactive.pm (setupLILO): replace linear option
	by lba32

	* lilo.pm (suggest): add lba32 by default

	* install_steps_interactive.pm (load_thiskind): moved the HPT
	stuff to install_any::ultra66 and call it.
	Add sound card configuration (3 lines :)

	* my_gtk.pm and interactive_gtk: resize the list and tree based on
	root window size

	* install_steps_gtk: $width and $height goes $::rootwidth and
	$::rootheight, also other dimensions goes global (main::)

	* commands.pm (strings): replace the typo \{$n,} by {$n,}

2000-02-23  Fran�ois Pons  <fpons@mandrakesoft.com>

	* build_archive, extract_archive: changed format of TOC to speed
	up extraction of archive, now 5 to 6 times faster to read TOC :-)
	
2000-02-22  Pixel  <pixel@mandrakesoft.com>

	* Xconfigurator.pm: load "Cards" database only to translate NAME
	to fields. Added file CardsNames created from Cards using
	share/Cards2CardsNames. Kind of list of normalized NAMEs	

	* MonitorsDB: replace the ` ' separator for vendor by `|'

	* install_steps_interactive.pm (timeConfig): use ask_from_treelist	

	* interactive_gtk.pm (ask_from_treelist): creation of
	ask_from_treelist. Usage is just the same as ask_from_list with
	one more argument (the separator eg: |, /)

2000-02-21  Fran�ois Pons  <fpons@mandrakesoft.com>

	* diskdrake.pm: fixed deadlock while trying to create partition
	when available space is equal or less than 2 cylinders. fixed
	Create action on corrupted partition by removing stalling window.
	Blocked partition table writing if there are error by forcing user
	to correct partition table.
	* partition_table.pm: fixed typo in verifyParts with cdie, added
	verifyParts on Resize action.
	
2000-02-21  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (create_big_help): display the help in full
	screen	

	* my_gtk.pm (_create_window): add big help on F1

	* common.pm (add2hash): now returns the first parameter

	* mouse.pm (detect): really defaults to serial mouse

	* interactive.pm: add ask_many_from_list_with_help and
	ask_many_from_list_with_help_ref

	* services.pm: creation, it handles what was in
	standalone/drakxservices

2000-02-18  Pixel  <pixel@mandrakesoft.com>

	* install_steps_gtk.pm (createXconf): added /dev/ (X wants
	"/dev/psaux" and not "psaux")

	* diskdrake.pm (Create): show start sector even for non-expert on
	non-i386

2000-02-16  Pixel  <pixel@mandrakesoft.com>

	* mouse.pm (detect): add defaults to serial mouse

	* install_steps_gtk.pm (createXconf): remove the defaults to
	serial mouse

2000-02-15  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm: "After %s partition %s," inlined otherwise does
	not please pablo and translators...

2000-02-14  Pixel  <pixel@mandrakesoft.com>

	* diskdrake.pm (Create): hide start sector choice for non-expert

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* partition_table_raw.pm (get_geometry): do not use the cylinder
	number given by HDIO_GETGEO cuz limited to 16bits. Compute using
	the total_sectors using HDIO_GET_IDENTITY

	* c/stuff.xs.pm: added total_sectors (gives the number of sector
	of a drive)

	* modules.pm (load): ignore error in loading prereq's
	
	* modules.pm (@drivers_by_category): rcpci instead of rcpci45,
	z85230 added

	* commands.pm (mount): add modules::load_deps otherwise the
	fs::mount won't succeed insmoding vfat if needed

2000-02-11  Fran�ois Pons  <fpons@mandrakesoft.com>

	* fixed diskdrake to handle limit case when creating and resizing
	partition table, address size limit and start sector limit.

2000-02-11  Pixel  <pixel@mandrakesoft.com>

	* install2.pm (main): add a callback on SEGV
	-> message printed
	-> that way, ENDs are called (otherwise skipped)

	* install_steps_interactive.pm (setup_thiskind): handles the undef
	value returned by load_thiskind
	
	* install_steps_interactive.pm (exitInstall): do not call
	install_steps::exitInstall

	* install_steps (exitInstall): removed
	* install_steps (END): added (it does ejectCdrom)

	* install_steps_interactive.pm (load_thiskind): returns undef if
	error loading a module

	* fs.pm (format_part): changed the prototype from $;$@ to $;@
	otherwise, @options always have a value (mostly undef) and mkdosfs
	fails (with "mkdosfs", "/dev/hdXX", undef, "-F", 32)

	* install_steps_interactive.pm (setup_thiskind):
	add a $auto_probe_pci that overrules $o->{auto_probe_pci}
	(that way no pci probe the second time)

2000-02-10  Fran�ois Pons  <fpons@mandrakesoft.com>

	* heavy modification of build_archive and extract_archive to manage
	a TOC directly in archive file, handle bzip2 or gzip compression,
	extract_archive can extract multiple files a time, with minimal
	invocation of uncompress program and follow symlink and expand
	directory contents.
	* use build_archive/extract_archive for locales.
	* fixed a min/max in install_steps_gtk for Resize/Create partition.
	* fixed adjustEnd with dos partition table, take care of magic 63
	sectors at beginning of partitions, a more solid method should be
	used for that.

2000-02-10  Pixel  <pixel@mandrakesoft.com>

	* modules.pm (load_thiskind): skip modules "unknown" and "ignore"

2000-02-09  Pixel  <pixel@mandrakesoft.com>

	* partition_table.pm (add): cdie if maximum number of partitions
	handled by linux is reached

	* Xconfigurator.pm (chooseResolutionsGtk): display the graphic
	card or server found

	* install_any.pm (relGetFile): for mdkinst files, take care not to
	have a double '/' (see debbugs #591)

	* install_steps_interactive.pm (configureNetwork):
	purpose: add ability to configure both modem and lan
	         clean up the behaviour

	* fs.pm (write_fstab): 
	purpose: sort the fstab per mount point (cuz /usr must be before /usr/local)
	also: rewrite of the part writing the fstab.