#!/usr/bin/perl $::isInstall = 1; # for /root/drakx/ddebug.log use strict; #use lib qw(/usr/lib/libDrakX); use lib "../perl-install"; use standalone; use interactive; use common; use partition_table; use fsedit; use fs; use any; use pkgs; use class_discard; use run_program; use log; # my $in = interactive->vnew; $::isStandalone = undef; # for /tmp/ddebug.log my (%options, @new_ARGV); foreach (@ARGV) { if (/^--(.*)/) { $options{$1} = 1; } else { push @new_ARGV, $_; } } my $rescue; if ($0 =~ /restore_globetrotter/) { %options = (install => 1, post => 1); $rescue = 1; } @ARGV = @new_ARGV; my @suggestions = ( { mntpoint => "/", size => 4500 << 11, type => 0x483, ratio => 1, maxsize => 6000 << 11 }, # splited / and /usr: # { mntpoint => "/", size => 250 << 11, type => 0x483, ratio => 1, maxsize => 2000 << 11 }, # { mntpoint => "/usr", size => 300 << 11, type => 0x483, ratio => 4, maxsize => 4000 << 11 }, { mntpoint => "/home", size => 100 << 11, type => 0x483, ratio => 3 }, # share partition with windows: { mntpoint => "/mnt/share", size => 2000 << 11, type => 0xb, ratio => 2, maxsize => 10000 << 11 }, { mntpoint => "/mnt/packages", size => 7500 << 11, type => 0x483, ratio => 3, maxsize => 7500 << 11 }, # allocated last b/c end of disk is usually faster: { mntpoint => "swap", size => 64 << 11, type => 0x82, ratio => 1, maxsize => 500 << 11 }, ); sub get_hds() { my $all_hds = fsedit::get_hds(); my $other; ($all_hds->{hds}, $other) = partition { $_->{usb_description} eq 'LaCie|LaCie Hard Drive USB' } @{$all_hds->{hds}}; die "I did not found any LaCie disk\n" if !$all_hds->{hds}[0]; $all_hds, $all_hds->{hds}[0]; # $other } sub prepare_disk() { # repartion the hard disk: print "PARTITIONNING\n"; my ($all_hds, $hd, $other) = get_hds(); # partition_table::remove($hd, $_) while partition_table::get_normal_parts($hd); run_program::run("swapoff", "/dev/$all_hds->{hds}[0]{device}8") if any { /$all_hds->{hds}[0]{device}/ } cat_("/proc/partitions"); partition_table::raw::zero_MBR_and_dirty($hd); fsedit::allocatePartitions($all_hds, \@suggestions); require diskdrake::interactive; require class_discard; # diskdrake::interactive::write_partitions(class_discard->new, $_, 'skip_check_rebootNeeded') foreach (@{$all_hds->{hds}}); foreach (@{$all_hds->{hds}}) { local $::isStandalone = undef; print "WRITE PARTITION ON $_->{file}\n"; diskdrake::interactive::write_partitions(class_discard->new, $_, 'skip_check_rebootNeeded') } # partition_table::write(@{$all_hds->{hds}}); ($all_hds, $hd, $other); } sub formatdisk { my ($hd) = @_; print "FORMATTING\n"; foreach (partition_table::get_normal_parts($hd)) { print qq(Formatting "$_->{device}" ($_->{mntpoint})\n); fs::format_part(undef, $_, $::prefix, undef) if !$::testing; } } #@ARGV <= 1 or die "usage: make_live [live_location=/tmp/live_tree]\n"; if (!find { m!/proc/bus/usb! } run_program::get_stdout('mount')) { warn "USB service is *NOT* started" if !$rescue; run_program::get_stdout('service', 'usb', 'start'); } my $pkg_dev; if ($rescue) { system("mount -t tmpfs none /tmp"); # let be able to see USB devices: system("mount -t usbfs none /proc/bus/usb"); system("modprobe usb-storage; modprobe sd_mod"); # let be able to detect SCSI hds: mkdir("/sys"); system("mount -t sysfs none /sys"); my ($all_hds, $hd, $other) = get_hds(); print "Looking for the package partition\n"; my @parts = partition_table::get_normal_parts($hd); my $pkg_dev = find { member(fs::type2fs($_), qw(ext2 ext3)) && chomp_(`e2label /dev/$_->{device} 2>/dev/root`) eq "MDK-PKGS" } @parts; die "I cannot find the package partition which is needed in order to restore the system!" if is_empty_hash_ref($pkg_dev) || !$pkg_dev->{device}; my $root = find { member(fs::type2fs($_), qw(ext2 ext3)) && chomp_(`e2label /dev/$_->{device} 2>/dev/root`) eq "MDK-ROOT" } @parts; $root = find { $_->{device} eq "sda1" } @parts if is_empty_hash_ref($root); die "I cannot find any hard disk to restore!" if is_empty_hash_ref($root) || !$root->{device}; print "Please wait, disk reinstallation is in progress, this can take quite some time\n"; print "Formating $root->{device}\n"; system("mkfs.ext2 -j /dev/$root->{device} > /dev/null\n"); } sub installPackages() { local $::testing = undef; # for a gconftool-2 cleaner: my $pid = fork(); !defined $pid and die("cannot fork: $!"); !$pid and do { while (1) { sleep(10); run_program::run('/usr/bin/killall', 'gconftool-2') if -x '/usr/bin/killall'; } }; my $_b = before_leaving { kill 'TERM', $pid if $pid }; # ensure no %_install_langs: output_p("$::prefix/etc/rpm/macros", "%_install_langs all\n"); # ensure boot from USB will work: output_p("$::prefix/etc/sysconfig/mkinitrd", "forceusb=yes\n"); mkdir_p("$::prefix/var/lib/rpm"); mkdir_p("$::prefix/root/drakx"); undef *install_any::setDefaultPackages; *install_any::setDefaultPackages = sub {}; undef *install_any::getFile; *install_any::getFile = sub { my ($f, $o_method) = @_; log::l("getFile $f:$o_method"); open(my $F, '/export/' . install_any::relGetFile($f)) or return; $F; }; undef *c::kernel_version; *c::kernel_version = sub { #my @l = glob_('/export/Mandrake/RPMS/kernel-enterprise-2.6*'); my @l = glob_('/export/Mandrake/RPMS/kernel-2.6*'); @l >= 1 or die "can't find kernel"; @l <= 1 or die "too many kernels"; first(`rpm -qp --qf '%{name}' $l[0]` =~ /kernel-(.*)/); }; my $kernel_version = c::kernel_version(); print "INSTALLING\n"; install_any::setPackages(my $o = $::o = { prefix => $::prefix, meta_class => 'desktop', default_packages => [ #- for screenshots: qw(fb2png), qw(XFree86-server XFree86-xfs XFree86-FBDev), qw(openssh-server), #- fred wants it qw(alsa-utils cdialog newt), qw(k3b-dvd), qw(davfs nfs-utils samba-server sane-backends xsane xsane-gimp ntp), qw(acpi acpid), #- so that removing acpi=ht will work qw(mountloop), #- crypted folders qw(mandrake-doc-en mandrake-doc-fr mandrake-doc-drakxtools-en mandrake-doc-drakxtools-fr), qw(autologin), qw(synaptics), #- network conf: qw(wireless-tools pcmcia-cs), #- zeroconf: qw(zcip dhcpcd tmdns), #- cnx stuff: qw(dhcp-client ppp kdenetwork-kppp ppp-pppoatm ppp-pppoe pptp-linux pptp-adsl rp-pppoe), #- ISDN stuff: # qw(isdn4net ibod isdn4k-utils), # not installed since it provides an interface (will be automatically installed by drakconnect) #- network file sharing: qw(nfs-utils-clients samba-client), #- network drivers and firmwares: qw(eagle-usb speedtouch speedtouch_mgmt unicorn), #- alt kernels: # glob_('/export/Mandrake/RPMS/kernel-2.4*'), #- for ISDN #- configuration: qw(drakconf drakcronat drakfirsttime drakxtools harddrake-ui mdkonline rpmdrake userdrake2), qw(cups cups-drivers foomatic-db gimpprint hpoj libnet-snmp mtools mtoolsfm nmap printer-filters printer-testpages printer-utils scli xojpanel xpp), #- printer stuff "ATI_kernel-$kernel_version", qw(ATI_GLX ATI_GLX-utils NVIDIA_GLX libMesaGLU1), # ATI_GLX requires ATI_kernel "NVIDIA_kernel-$kernel_version", # qw(hcfpcimodem hsflinmodem ltmodem), #- 2.4.x only qw(xinput), #- for some mice qw(bash-completion binutils emacs-X11 ntsysv perl-doc perl-Term-Readline-Gnu), #- allow debugging qw(openssh-askpass-gnome), #- openssh-askpass for mountloop doesn't allow to click on ok/cancel buttons qw(clanbomber freeciv-client freeciv-server crack-attack kdegames), #- more games qw(numlock), # shorewall # not installed since its default config breaks network (will be automatically installed by drakfirewall) qw(xawtv zapping), #- tv apps qw(scribus scribus-i18n-de scribus-i18n-fr), #- John Jablonski says it's so much useful (map { "OpenOffice.org-l10n-$_" } qw(ar ca cs da de el en es eu fi fr it ja ko nl pl pt pt_BR ru sk sv tr zh_CN zh_TW)), qw(dosfstools mtools), qw(koffice konsole), qw(devfsd dynamic harddrake hotplug magicdev mandrake-globetrotter netprofile), qw(gnome2), qw(alsa-utils), qw(ipw2100 ipw2100_kernel ipw2100_kernel-2.6.3.13mdk), # ipw2100_kernel-$kernel_version, #- fonts: qw(XFree86-100dpi-fonts XFree86-75dpi-fonts), qw(fonts-bitmap-tscii fonts-hebrew-elmar), (map { "fonts-ttf-$_" } qw(arabic armenian bengali big5 decoratives ethiopic gb2312 japanese kannada korean latex tamil thai tscii vera west_european)), (map { "fonts-type1-$_" } qw(cyrillic greek hebrew)), ], }); my %compssUsersChoice = map { $_ => 1 } map { @{$_->{flags}} } values %{$o->{compssUsers}}; $compssUsersChoice{$_} = 1 foreach 'SYSTEM', 'DVD', 'USB', 'SOUND', 'BURNER', 'UTF8', 'DOCS', 'TV', '3D', 'INSTALL'; $compssUsersChoice{qq(LOCALES"$_")} = 1 foreach lang::langsLANGUAGE({ all => 1 }); pkgs::setSelectedFromCompssList($o->{packages}, \%compssUsersChoice, 4, 0); my $unselect = sub { my ($pkg) = @_; my $p = pkgs::packageByName($o->{packages}, $pkg); pkgs::unselectPackage($o->{packages}, $p) if $p; }; # unselect some packages whose services fsck up the box and whose services are not enabled by appropriate tools: # (shorewall must be deselected before iptables is) $unselect->($_) foreach qw(at hpoj shorewall iptables ntp tmdns zcip ); # unselect uim since uim IM break first time wizard when selecting english: $unselect->($_) foreach qw(uim-applet uim libuim0); my @toInstall = pkgs::packagesToInstall($o->{packages}); local $ENV{DURING_INSTALL} = 1; $ENV{LD_LIBRARY_PATH} = "/lib:/usr/lib:/usr/X11R6/lib:/usr/lib/qt3/lib"; pkgs::install($::prefix, 0, \@toInstall, $o->{packages}); eval { fs::umount("$::prefix/proc") }; } sub config_X_proprietary_drivers() { unlink "$::prefix/usr/lib/libGL.so"; my %name_to_Driver = (NVIDIA_GLX => 'nvidia', ATI_GLX => 'fglrx'); my $lib = 'libGL.so.1'; symlinkf("/etc/X11/$lib", "$::prefix/usr/lib/$lib"); foreach (keys %name_to_Driver) { my ($full_name) = run_program::rooted_get_stdout($::prefix, 'rpm', '-ql', $_) =~ m!/usr/lib/(\Q$lib\E\..*)! or die ''; symlinkf($full_name, "$::prefix/usr/lib/$lib.$name_to_Driver{$_}"); } #- remove the dirty hack done by NVIDIA_kernel-xxx proprietary package #- we do it by hand when needed substInFile { $_ = '' if $_ eq 'nvidia' } "$::prefix/etc/modules"; } $::prefix = $ARGV[0] || '/tmp/live_tree'; -d $::prefix or mkdir $::prefix; print "Making live in $::prefix directory.\n"; my ($all_hds, $hd, $other) = do { # here we want testing so that diskdrake still set mount points in data structure: local $::testing = !$options{partition}; prepare_disk(); }; formatdisk($hd) if $options{format}; add2hash($hd, $other); undef $::testing; my @parts = partition_table::get_normal_parts($hd); my ($root) = grep { $_->{mntpoint} eq "/" } @parts; print "Root is $root->{device}\n"; run_program::run('tune2fs', '-L', "MDK-ROOT", "/dev/$root->{device}"); # fs::mount_part($root, $::prefix); my $fstab = [ fsedit::get_all_fstab($all_hds) ]; # we need to mount every fs we want to see into /etc/fstab !!! fs::mount_part($_, $::prefix) foreach sort { $a->{mntpoint} cmp $b->{mntpoint} } @$fstab; symlink("$::prefix/mnt/packages", "/export") if $rescue; eval { print "Installing packages\n"; installPackages(); } if $options{install}; print "ERROR WHILE INSTALLING PACKAGES: $@\n" if $@; log::closeLog; sub doRootSubst { my ($file) = @_; substInFile { s!/dev/$root->{device}!LABEL=MDK-ROOT!g; } $file; } #fs::merge_info_from_mtab($fstab); fs::write_fstab($all_hds, $::prefix); append_to_file("$::prefix/etc/fstab", "none /dev/pts devpts mode=0620 0 0"); doRootSubst("$::prefix/etc/fstab"); my ($home) = grep { $_->{mntpoint} eq "/home" } @parts; my ($mnt_pkgs) = grep { $_->{mntpoint} eq "/mnt/packages" } @parts; run_program::run('tune2fs', '-L', "MDK-HOME", "/dev/$home->{device}") if $home; run_program::run('tune2fs', '-L', "MDK-PKGS", "/dev/$mnt_pkgs->{device}") if $mnt_pkgs; substInFile { s!defaults\s!defaults,ro ! if m!/mnt/packages!; s!defaults\s!defaults,umask=0000 ! if m!/mnt/share!; s!/dev/$home->{device}!LABEL=MDK-HOME!g; s!/dev/$mnt_pkgs->{device}!LABEL=MDK-PKGS!g; } "$::prefix/etc/fstab"; #------------------------------------------------------------------- #- Bootloader print "Configuring bootloader\n"; system("modprobe loop"); require keyboard; require bootloader; my $bootloader = { keytable => keyboard::keyboard2kmap(keyboard::lang2keyboard('fr')), bios => { '/dev/sda' => '0x80' }, }; bootloader::suggest($bootloader, $all_hds->{hds}, $fstab, vga_fb => 788, quiet => 1); # LILO failled to boot from SCSI: # $bootloader->{method} = 'lilo-graphic'; $bootloader->{method} = 'grub'; eval { bootloader::install($bootloader, $fstab, $all_hds->{hds}) }; doRootSubst("$::prefix/boot/grub/menu.lst"); run_program::rooted($::prefix, 'sh', '/boot/grub/install.sh'); # fix GRUB configuration: substInFile { # use FB by default on versionned entries so that the initial versionned entry behave like those created by /sbin/installkernel: s/$/ vga=788/ if /^kernel.*\d\.\d\.\d/; # set devfs=mount as well so that installkernel can properly install bootable 2.4.x kernels: s/$/ devfs=mount/ if /^kernel/ && !/failsafe/; } "$::prefix/boot/grub/menu.lst"; ## disable ISDN by default (bogus isdn4net came with an enabled interface :-(): #substInFile { # s/#ONBOOT.*/ONBOOT="no"/ #} "$::prefix/etc/sysconfig/network-scripts/ifcfg-ippp0"; # print "Post install misc configuration\n"; # clean services: # cups-lpd ibod isdn4linux isdnlog)) { run_program::rooted($::prefix, '/sbin/chkconfig', '--del', $_) foreach qw(acon jserver oki4daemon); #foreach my $service (qw(acon atd cups-lpd hpoj ibod iptables isdn4linux isdnlog jserver ntpd oki4daemon shorewall tmdns)) { # run_program::rooted($::prefix, '/sbin/chkconfig', '--level', $_, $service, 'off') foreach qw(3 5); #} # probably useless: foreach my $service (qw(alsa dm harddrake hotplug sound)) { run_program::rooted($::prefix, '/sbin/chkconfig', '--level', $_, $service, 'on') foreach qw(3 5); } if ($options{post}) { #------------------------------------------------------------------- # save a few more files in profiles my $prof_cfg = "$::prefix/etc/netprofile/list"; my @files = map { chomp_($_) } cat_($prof_cfg); # do not save the whole /etc/sysconfig; push @files, (map { "/etc/X11/$_" } qw(XF86Config XF86Config-4)), (map { "/etc/sysconfig/$_" } qw(keyboard harddrake2/previous_hw harddisks)), (map { "/etc/$_" } qw(modprobe.conf modprobe.devfs modprobe.preload modules modules.conf modules.devfs)), qw(/etc/asound.state /etc/fstab /etc/ld.so.conf/GL.conf /etc/shorewall/); output($prof_cfg, join("\n", sort @files)); #------------------------------------------------------------------- #- regenerate library loader and fonts cache run_program::rooted($::prefix, 'ldconfig'); any::fix_broken_alternatives(); run_program::rooted($::prefix, 'fc-cache'); #- generate cache in all directories mentioned in config file #- XFree touch("$::prefix/etc/menu/enable_simplified"); { local $ENV{LC_ALL} = 'en_US'; #- update-menus doesn't work when there is no locale (aka locale "C") #local $ENV{HOME} = '/'; #- savekdemimetypes.pl needs this otherwise it's tmp file fails run_program::rooted($::prefix, 'update-menus', '-n'); } run_program::rooted($::prefix, 'nspluginscan'); #- must be run before kbuildsycoca for the ksycoca to be flash plugin aware $ENV{HELP_BROWSER} = "kfmclient openProfile webbrowsing"; $ENV{BROWSER} = "kfmclient openProfile webbrowsing"; $ENV{DESKTOP} = "kde"; #- faster boot: foreach my $lang (lang::list_langs()) { local $ENV{LC_ALL} = lang::getLANGUAGE($lang); unlink "$::prefix/usr/share/services/ksycoca"; run_program::rooted($::prefix, 'kbuildsycoca', '--global'); rename("$::prefix/usr/share/services/ksycoca", "$::prefix/usr/share/services/ksycoca-$lang"); } symlinkf('/etc/X11/ksycoca', "$::prefix/usr/share/services/ksycoca"); } # clean gconftool-2 mess: unlink $_ foreach glob("$::prefix/core.*"); ##- Mandrake #substInFile { # s!Mandrake(l| L)inux release (\S+) \(.*\)!Mandrakelinux Nomad, powered by LaCie Mobile Hard Drive)!; #} "$::prefix/etc/mandrake-release"; # system("rsync -rvltp /export/ $::prefix/mnt/packages/") if !$rescue; unlink $_ foreach glob("$::prefix/var/lib/urpmi/*"); run_program::rooted($::prefix, 'urpmi.addmedia', '-h', 'main', 'file:///mnt/packages/Mandrake/RPMS'); run_program::rooted($::prefix, 'urpmi.addmedia', '-h', 'contrib', 'file:///mnt/packages/Mandrake/RPMS2'); # for fast test replaying: run_program::rooted($::prefix, 'tar', 'cfj', '/root/etc.tar.bz2', '/etc'); system("umount $::prefix/proc"); eval { fs::umount_all($fstab, $::prefix) } or system("umount $::prefix");