# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR Free Software Foundation, Inc.
# Wachara Chinsettawong <wachara@yahoo.com>, 2001
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-08-30 18:05+0800\n"
"PO-Revision-Date: 2001-09-10 14:24GMT+7\n"
"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
"Language-Team: Thai <th@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.5\n"
#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr ""
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "ลองใหม่"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1324
#, c-format
msgid "Reboot"
msgstr ""
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr ""
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "การคอนฟิก"
#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "เลือกระดับระบบรักษาความปลอดภัย"
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:37 fsedit.pm:209 install_any.pm:1730 install_any.pm:1782
#: install_steps.pm:81 install_steps_interactive.pm:37 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:910 network/netconnect.pm:914
#: network/netconnect.pm:918 network/netconnect.pm:923
#: network/netconnect.pm:1067 network/netconnect.pm:1071
#: network/netconnect.pm:1189 network/netconnect.pm:1194
#: network/netconnect.pm:1214 network/netconnect.pm:1367
#: network/thirdparty.pm:266 network/thirdparty.pm:273
#: network/thirdparty.pm:309 network/thirdparty.pm:311
#: network/thirdparty.pm:332 network/thirdparty.pm:356
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1575
#: printer/printerdrake.pm:1623 printer/printerdrake.pm:1660
#: printer/printerdrake.pm:1705 printer/printerdrake.pm:1709
#: printer/printerdrake.pm:1723 printer/printerdrake.pm:1815
#: printer/printerdrake.pm:1896 printer/printerdrake.pm:1900
#: printer/printerdrake.pm:1904 printer/printerdrake.pm:1953
#: printer/printerdrake.pm:2011 printer/printerdrake.pm:2015
#: printer/printerdrake.pm:2029 printer/printerdrake.pm:2149
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2196
#: printer/printerdrake.pm:2271 printer/printerdrake.pm:2289
#: printer/printerdrake.pm:2298 printer/printerdrake.pm:2307
#: printer/printerdrake.pm:2318 printer/printerdrake.pm:2382
#: printer/printerdrake.pm:2477 printer/printerdrake.pm:3026
#: printer/printerdrake.pm:3310 printer/printerdrake.pm:3316
#: printer/printerdrake.pm:3880 printer/printerdrake.pm:3884
#: printer/printerdrake.pm:3888 printer/printerdrake.pm:4349
#: printer/printerdrake.pm:4590 printer/printerdrake.pm:4614
#: printer/printerdrake.pm:4691 printer/printerdrake.pm:4757
#: printer/printerdrake.pm:4877 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1588 standalone/drakTermServ:1593
#: standalone/drakTermServ:1601 standalone/drakTermServ:1613
#: standalone/drakTermServ:1634 standalone/drakauth:36
#: standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1093 standalone/drakbackup:1125
#: standalone/drakbackup:1648 standalone/drakbackup:1804
#: standalone/drakbackup:2429 standalone/drakbackup:4118
#: standalone/drakbackup:4338 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:304 standalone/draknfs:593 standalone/draknfs:600
#: standalone/draknfs:607 standalone/drakroam:41 standalone/draksambashare:379
#: standalone/draksambashare:383 standalone/draksambashare:386
#: standalone/draksambashare:389 standalone/draksambashare:449
#: standalone/draksambashare:473 standalone/draksambashare:547
#: standalone/draksambashare:629 standalone/draksambashare:696
#: standalone/draksambashare:796 standalone/draksambashare:803
#: standalone/draksambashare:938 standalone/draksambashare:1129
#: standalone/draksambashare:1138 standalone/draksambashare:1147
#: standalone/draksambashare:1168 standalone/draksambashare:1177
#: standalone/draksambashare:1186 standalone/draksambashare:1206
#: standalone/draksambashare:1214 standalone/draksambashare:1226
#: standalone/draksplash:150 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:168
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "ผิดพลาด"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
"หากทำงานต่ออาจเกิดความเสียหายได้"
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "มีปัญหาเกิดขึ้น"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "ฟอร์แมต loopback file %s"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "ชนิดแฟ้มและโปรแกรมที่ใช้"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "โปรดอ่านอย่างถี่ถ้วน!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB หรือมากกว่า"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X เซิร์ฟเวอร์"
#: Xconfig/card.pm:156
#, fuzzy, c-format
msgid "Choose an X server"
msgstr "เลือก X เซิร์ฟเวอร์"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head configuration"
#: Xconfig/card.pm:189
#, fuzzy, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
"คุณต้องการทำอะไร?"
#: Xconfig/card.pm:258
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"
#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"
#: Xconfig/card.pm:351
#, c-format
msgid "Xorg configuration"
msgstr "การคอนฟิก Xorg"
#: Xconfig/card.pm:353
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Xorg ชนิดใหนที่คุณต้องการมี"
#: Xconfig/card.pm:386
#, c-format
msgid "Configure all heads independently"
msgstr "Configure all heads independently"
#: Xconfig/card.pm:387
#, c-format
msgid "Use Xinerama extension"
msgstr "Use Xinerama extension"
#: Xconfig/card.pm:392
#, fuzzy, c-format
msgid "Configure only card \"%s\"%s"
msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"
#: Xconfig/card.pm:404 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:411 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s with 3D hardware acceleration"
#: Xconfig/card.pm:413
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Your card can have 3D hardware acceleration support with Xorg %s."
#: Xconfig/card.pm:419
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
#: Xconfig/card.pm:421
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:971
#, c-format
msgid "Custom"
msgstr "แบบปรับแก้ได้ (Customized) "
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1324
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4686 printer/printerdrake.pm:5141
#: standalone/drakhosts:263 standalone/drakids:62 standalone/drakids:71
#: standalone/drakids:79 standalone/draksplash:81 standalone/logdrake:173
#: standalone/net_applet:82 standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "ออก"
#: Xconfig/main.pm:117
#, fuzzy, c-format
msgid "Graphic Card"
msgstr "กราฟฟิคการ์ด"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "จอภาพ"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "ขนาดจอภาพ"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "ทดสอบ"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1125 standalone/drakfont:491
#: standalone/drakfont:554
#, c-format
msgid "Options"
msgstr "อ็อปชั่น"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"เก็บการเปลี่ยนแปลง\n"
"การปรับแต่งปัจจุบัณคือ:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "เลือกจอภาพ"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "เลือกจอภาพ"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr ""
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Generic"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "เวนเดอร์"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "อัตราการรีเฟรชตามแนวนอน"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "อัตราการรีเฟรชตามแนวตั้ง"
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 สี (8 บิต)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "สามหมื่นสองพันสี (15 บิต)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "หกหมื่นห้าพันสี (16 บิต)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "สิบหกล้านสี (24 บิต)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "ความละเอียด"
#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1586 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "อื่นๆ"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "เลือกขนาดจอภาพและความละเอียดสี"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "กราฟฟิคการ์ด: %s"
#: Xconfig/resolution_and_depth.pm:373 interactive.pm:432
#: interactive/gtk.pm:811 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1350 standalone/drakbackup:3975
#: standalone/drakbackup:4035 standalone/drakbackup:4079
#: standalone/drakconnect:158 standalone/drakconnect:852
#: standalone/drakconnect:939 standalone/drakconnect:1030
#: standalone/drakfont:575 standalone/drakfont:585 standalone/drakroam:392
#: standalone/draksplash:161 standalone/drakups:212 standalone/net_monitor:340
#: ugtk2.pm:412 ugtk2.pm:510 ugtk2.pm:918 ugtk2.pm:941
#, c-format
msgid "Ok"
msgstr "ตกลง"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:485 install_steps_interactive.pm:425
#: install_steps_interactive.pm:834 interactive.pm:433 interactive/gtk.pm:815
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3960
#: standalone/drakautoinst:215 standalone/drakbackup:1350
#: standalone/drakbackup:3901 standalone/drakbackup:3905
#: standalone/drakbackup:3963 standalone/drakconnect:157
#: standalone/drakconnect:937 standalone/drakconnect:1029
#: standalone/drakfont:585 standalone/drakfont:663 standalone/drakfont:740
#: standalone/draksplash:161 standalone/drakups:219 standalone/logdrake:173
#: standalone/net_monitor:339 ugtk2.pm:406 ugtk2.pm:508 ugtk2.pm:517
#: ugtk2.pm:918
#, c-format
msgid "Cancel"
msgstr "ยกเลิก"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:636 interactive.pm:527
#: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
#: standalone/drakbackup:3897 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:314 standalone/draksec:336 standalone/draksec:338
#: standalone/draksec:356 standalone/draksec:358 ugtk2.pm:1050 ugtk2.pm:1051
#, c-format
msgid "Help"
msgstr "ความช่วยเหลือ"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "ทดสอบการคอนฟิก"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
#: Xconfig/test.pm:31
#, fuzzy, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Leaving in %d seconds"
msgstr "%d วินาที"
#: Xconfig/test.pm:129
#, fuzzy, c-format
msgid "Is this the correct setting?"
msgstr "ถูกต้องหรือไม่?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "เลือกชนิดของเม้าส์: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "ดีไวซ์ของเม้าส์: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "จอภาพ: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "กราฟฟิคการ์ด: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "อความละเอียดสี: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "ความละเอียดของภาพ %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "ไดร์เวอร์ Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
#: Xconfig/various.pm:99
#, fuzzy, c-format
msgid "What norm is your TV using?"
msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
#: Xconfig/xfree.pm:647
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:142 harddrake/sound.pm:192 interactive.pm:470 pkgs.pm:461
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
#: standalone/service_harddrake:207
#, c-format
msgid "Please wait"
msgstr "โปรดรอสักครู่"
#: any.pm:142
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "การติดตั้ง Bootloader"
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"
#: any.pm:232
#, fuzzy, c-format
msgid "First sector of the root partition"
msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
#: any.pm:234
#, fuzzy, c-format
msgid "On Floppy"
msgstr "บันทึกลงแผ่นฟล้อปปี้"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4346
#, c-format
msgid "Skip"
msgstr "ข้ามไป"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "การติดตั้ง LILO/grub"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
#: any.pm:267 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "Boot Style Configuration"
#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "อ๊อปชั่นหลักของ Bootloader"
#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"
#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"
#: any.pm:278 any.pm:613 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"
#: any.pm:278 any.pm:613 authentication.pm:181 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "โปรดลองอีกครั้ง"
#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Bootloader ที่จะใช้"
#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "อุปกรณ์บูต"
#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
#: any.pm:288
#, fuzzy, c-format
msgid "Enable ACPI"
msgstr "Enable CD Boot?"
#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr ""
#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr ""
#: any.pm:294 any.pm:648 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:565 printer/printerdrake.pm:1887
#: printer/printerdrake.pm:2008 standalone/drakbackup:1630
#: standalone/drakbackup:3504 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "รหัสผ่าน"
#: any.pm:295 any.pm:649 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "รหัสผ่าน (ใส่อีกครั้ง)"
#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"
#: any.pm:296
#, c-format
msgid "restrict"
msgstr "จำเพาะ"
#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "ลบ /tmp ตอน boot ทุกครั้ง"
#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"
#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "ข้อความ init"
#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "Open Firmware Delay"
#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Kernel Boot Timeout"
#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Enable CD Boot?"
#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "Enable OF Boot?"
#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "Default OS?"
#: any.pm:368
#, c-format
msgid "Image"
msgstr "Image"
#: any.pm:369 any.pm:379
#, c-format
msgid "Root"
msgstr "Root"
#: any.pm:370 any.pm:392
#, c-format
msgid "Append"
msgstr "Append"
#: any.pm:372 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "โหมดของการแสดงผล"
#: any.pm:374
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:375
#, fuzzy, c-format
msgid "Network profile"
msgstr "โปรแกรมค้นหาเครือข่าย"
#: any.pm:384 any.pm:389 any.pm:391
#, c-format
msgid "Label"
msgstr "Label"
#: any.pm:386 any.pm:396 harddrake/v4l.pm:368 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Default"
#: any.pm:393
#, c-format
msgid "Initrd-size"
msgstr "Initrd-size"
#: any.pm:395
#, c-format
msgid "NoVideo"
msgstr "NoVideo"
#: any.pm:406
#, c-format
msgid "Empty label not allowed"
msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"
#: any.pm:407
#, c-format
msgid "You must specify a kernel image"
msgstr ""
#: any.pm:407
#, fuzzy, c-format
msgid "You must specify a root partition"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
#: any.pm:408
#, c-format
msgid "This label is already used"
msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"
#: any.pm:422
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
#: any.pm:423
#, c-format
msgid "Linux"
msgstr "ลีนุกซ์"
#: any.pm:423
#, c-format
msgid "Other OS (SunOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"
#: any.pm:424
#, c-format
msgid "Other OS (MacOS...)"
msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"
#: any.pm:424
#, c-format
msgid "Other OS (Windows...)"
msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"
#: any.pm:452
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
#: any.pm:599
#, c-format
msgid "access to X programs"
msgstr ""
#: any.pm:600
#, c-format
msgid "access to rpm tools"
msgstr ""
#: any.pm:601
#, c-format
msgid "allow \"su\""
msgstr ""
#: any.pm:602
#, c-format
msgid "access to administrative files"
msgstr ""
#: any.pm:603
#, c-format
msgid "access to network tools"
msgstr ""
#: any.pm:604
#, c-format
msgid "access to compilation tools"
msgstr ""
#: any.pm:609
#, c-format
msgid "(already added %s)"
msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"
#: any.pm:614
#, c-format
msgid "This password is too simple"
msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
#: any.pm:615
#, c-format
msgid "Please give a user name"
msgstr "โปรดป้อนชื่อผู้ใช้"
#: any.pm:616
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"
#: any.pm:617
#, c-format
msgid "The user name is too long"
msgstr "ชื่อผู้ใช้ยาวเกินไป"
#: any.pm:618
#, c-format
msgid "This user name has already been added"
msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
#: any.pm:619 any.pm:651
#, c-format
msgid "User ID"
msgstr "รหัสผู้ใช้"
#: any.pm:620 any.pm:652
#, c-format
msgid "Group ID"
msgstr "รหัสกลุ่ม"
#: any.pm:623
#, c-format
msgid "%s must be a number"
msgstr ""
#: any.pm:624
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""
#: any.pm:629 standalone/draksambashare:1210
#, c-format
msgid "Add user"
msgstr "เพิ่มผู้ใช้"
#: any.pm:631
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"ให้ใส่ผู้ใช้\n"
"%s"
#: any.pm:634 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:5141
#: standalone/drakbackup:2717 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "ทำเรียบร้อยแล้ว"
#: any.pm:635 help.pm:51
#, c-format
msgid "Accept user"
msgstr "ยอมรับผู้ใช้"
#: any.pm:646
#, c-format
msgid "Real name"
msgstr "ชื่อเต็ม"
#: any.pm:647 standalone/drakbackup:1625
#, fuzzy, c-format
msgid "Login name"
msgstr "ชื่อโดเมน"
#: any.pm:650
#, c-format
msgid "Shell"
msgstr "เชลล์ที่ใช้"
#: any.pm:654
#, c-format
msgid "Icon"
msgstr "Icon"
#: any.pm:701 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"
#: any.pm:702
#, fuzzy, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"
#: any.pm:703
#, fuzzy, c-format
msgid "Use this feature"
msgstr "คุณต้องการใช้ aboot หรือไม่"
#: any.pm:704
#, c-format
msgid "Choose the default user:"
msgstr "เลือกผู้ใช้ default"
#: any.pm:705
#, c-format
msgid "Choose the window manager to run:"
msgstr "เลือก window manager:"
#: any.pm:717 any.pm:785
#, fuzzy, c-format
msgid "Please choose a language to use."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
#: any.pm:718 any.pm:786
#, fuzzy, c-format
msgid "Language choice"
msgstr "เลือกภาษาที่คุณใช้"
#: any.pm:746
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
#: any.pm:749
#, c-format
msgid "Multi languages"
msgstr ""
#: any.pm:765 any.pm:794 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr ""
#: any.pm:766 help.pm:647
#, fuzzy, c-format
msgid "All languages"
msgstr "เลือกภาษาที่คุณใช้"
#: any.pm:838 help.pm:566 help.pm:855 install_steps_interactive.pm:955
#, fuzzy, c-format
msgid "Country / Region"
msgstr "ขนาดจอภาพ"
#: any.pm:840
#, fuzzy, c-format
msgid "Please choose your country."
msgstr "คุณมีเม้าส์ชนิดใด"
#: any.pm:842
#, fuzzy, c-format
msgid "Here is the full list of available countries"
msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
#: any.pm:843
#, fuzzy, c-format
msgid "Other Countries"
msgstr "กำลังตรวจสอบพอร์ต"
#: any.pm:843 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:393
#, c-format
msgid "Advanced"
msgstr "Advanced"
#: any.pm:851
#, c-format
msgid "Input method:"
msgstr ""
#: any.pm:854 install_any.pm:421 network/netconnect.pm:303
#: network/netconnect.pm:308 network/netconnect.pm:1180 network/wireless.pm:7
#: printer/printerdrake.pm:105 printer/printerdrake.pm:2429
#, c-format
msgid "None"
msgstr "ไม่มี"
#: any.pm:971
#, fuzzy, c-format
msgid "No sharing"
msgstr "ไม่มีเครื่องพิมพ์"
#: any.pm:971
#, fuzzy, c-format
msgid "Allow all users"
msgstr "เพิ่มผู้ใช้"
#: any.pm:975
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
#: any.pm:987
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
#: any.pm:990
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
#: any.pm:998
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
#: any.pm:1023
#, c-format
msgid "Launch userdrake"
msgstr ""
#: any.pm:1023 printer/printerdrake.pm:4185 printer/printerdrake.pm:4188
#: printer/printerdrake.pm:4189 printer/printerdrake.pm:4190
#: printer/printerdrake.pm:5453 standalone/drakTermServ:294
#: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498
#: standalone/drakroam:242 standalone/net_monitor:118
#: standalone/printerdrake:565
#, c-format
msgid "Close"
msgstr "ปิด"
#: any.pm:1025
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
#: authentication.pm:23
#, fuzzy, c-format
msgid "Local file"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr ""
#: authentication.pm:25
#, fuzzy, c-format
msgid "NIS"
msgstr "ใช้ NIS"
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr ""
#: authentication.pm:27 authentication.pm:152
#, fuzzy, c-format
msgid "Windows Domain"
msgstr "โดเมน NIS"
#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr ""
#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr ""
#: authentication.pm:55
#, fuzzy, c-format
msgid "Local file:"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง):"
#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr ":"
#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:57
#, fuzzy, c-format
msgid "NIS:"
msgstr "ใช้ NIS:"
#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:58
#, fuzzy, c-format
msgid "Windows Domain:"
msgstr "โดเมน NIS:"
#: authentication.pm:58
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr ""
#: authentication.pm:59 authentication.pm:60
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""
#: authentication.pm:85
#, fuzzy, c-format
msgid "Authentication LDAP"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr ""
#: authentication.pm:87 share/compssUsers.pl:102
#, fuzzy, c-format
msgid "LDAP Server"
msgstr "เซิร์ฟเวอร์ NIS"
#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "ง่าย"
#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:110 authentication.pm:148
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "โดเมน"
#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "เซิร์ฟเวอร์"
#: authentication.pm:114
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr ""
#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:117
#, fuzzy, c-format
msgid "Password for user"
msgstr "รหัสผ่าน"
#: authentication.pm:118
#, c-format
msgid "Encryption"
msgstr "การเช้ารหัส"
#: authentication.pm:129
#, fuzzy, c-format
msgid "Authentication NIS"
msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"
#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "โดเมน NIS"
#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "เซิร์ฟเวอร์ NIS"
#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
#: authentication.pm:148
#, fuzzy, c-format
msgid "Authentication Windows Domain"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: authentication.pm:153
#, fuzzy, c-format
msgid "Domain Admin User Name"
msgstr "ชื่อโดเมน"
#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr ""
#: authentication.pm:155
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""
#: authentication.pm:156
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Default"
#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
#: authentication.pm:171
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "เซ็ตรหัสผ่านรูท"
#: authentication.pm:172 standalone/drakvpn:1111
#, fuzzy, c-format
msgid "Authentication method"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "ไม่มีรหัสผ่าน"
#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
#: authentication.pm:188 network/netconnect.pm:308 network/netconnect.pm:566
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr ""
# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:765
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
#: bootloader.pm:865
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO แบบ graphical menu"
#: bootloader.pm:866
#, c-format
msgid "LILO with text menu"
msgstr "LILO แบบ text menu"
#: bootloader.pm:867
#, c-format
msgid "GRUB with graphical menu"
msgstr ""
#: bootloader.pm:868
#, c-format
msgid "GRUB with text menu"
msgstr ""
#: bootloader.pm:869
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:947
#, c-format
msgid "not enough room in /boot"
msgstr "ไม่มีที่พอใน /boot"
#: bootloader.pm:1433
#, fuzzy, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
#: bootloader.pm:1473
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
#: bootloader.pm:1486
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1487
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "ติดตั้งบูตโหลดเดอร์"
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d นาที"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 นาที"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d วินาที"
#: common.pm:253
#, c-format
msgid "kdesu missing"
msgstr "ไม่มี kdesu "
#: common.pm:256
#, c-format
msgid "consolehelper missing"
msgstr ""
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "ออสเตรีย"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "ออสเตรเลีย"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "เบลเยียม"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "บราซิล"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "แคนาดา"
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr ""
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "คอสตาริกา"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "สาธารณรัฐเช็ค"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "เยอรมนี"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr ""
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, fuzzy, c-format
msgid "Estonia"
msgstr "Estonian"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "สเปน"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "ฟินแลนด์"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "ฝรั่งเศส"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "กรืซ"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, fuzzy, c-format
msgid "Hungary"
msgstr "อังการี"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, fuzzy, c-format
msgid "Ireland"
msgstr "ไอซ์แลนด์"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "อิสราเอล"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "อิตาลี"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "ญี่ปุ่น"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "เนเธอร์แลนด์"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "นอร์เวย์"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr ""
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "โปแลนด๋"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "โปรตุเกส"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "รัสเซีย"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "สวีเดน"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, fuzzy, c-format
msgid "Slovakia"
msgstr "สโลวาเนีย"
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr ""
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "ไต้หวัน"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr ""
#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "สหรัฐอเมริกา"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "ใหม่"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "เลิกเม้าท์์ระบบไฟล์"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "เม้าท์"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "กำหนดจุดเม้าท์"
#: diskdrake/dav.pm:83
#, fuzzy, c-format
msgid "Please enter the WebDAV server URL"
msgstr "กรุณาทดสอบเม้าส์"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr ""
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "เซิร์ฟเวอร์: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "จุดเม้าท์: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, fuzzy, c-format
msgid "Options: %s"
msgstr "พาร์ติชั่น %s"
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "กรุณาทำ backup ก่อน"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
"ด้านหน้าของ disk"
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Wizard"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "เลือกกิจกรรม"
#: diskdrake/hd_gtk.pm:189
#, fuzzy, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
"(กดที่มันแล้วกด \"ปรับขนาด\")"
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "โปรดเลือกพาร์ติชั่น"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:487
#: standalone/drakbackup:2952 standalone/drakbackup:3012
#, c-format
msgid "Details"
msgstr "รายละเอียด"
#: diskdrake/hd_gtk.pm:251
#, fuzzy, c-format
msgid "No hard drives found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, fuzzy, c-format
msgid "Journalised FS"
msgstr "การเม้าท์ล้มเหลว"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "สวอป"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "หน้าต่าง"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "ว่าง"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "ประเภทของระบบไฟล์:"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "ใช้ ``%s'' แทน"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "สร้าง"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "ประเภท"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:246
#, c-format
msgid "Delete"
msgstr "ลบ"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "ใช้ ``Unmount'' ก่อน"
#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose another partition"
msgstr "สร้างพาร์ติชั่นใหม่"
#: diskdrake/interactive.pm:194
#, fuzzy, c-format
msgid "Choose a partition"
msgstr "เลือกกิจกรรม"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "เลิกทำงาน"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "ยกเลิก"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "ปกติ > สำหรับผู้ชำนาญ"
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "ทำงานต่อหรือไม่?"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "ออกโดยไม่ต้องบันทึก"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:285
#, fuzzy, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
#: diskdrake/interactive.pm:292 install_steps_interactive.pm:332
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "ล้างทั้งหมด"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "กำหนดแบบอัตโนมัติ"
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "More"
#: diskdrake/interactive.pm:317
#, fuzzy, c-format
msgid "Hard drive information"
msgstr "การตรวจหาฮาร์ดไดรว์"
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
"พาร์ติชั่นแบบ extended ได้"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""
#: diskdrake/interactive.pm:368 help.pm:530
#, fuzzy, c-format
msgid "Save partition table"
msgstr "บันทึกตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:369 help.pm:530
#, fuzzy, c-format
msgid "Restore partition table"
msgstr "กู้ตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "กู้ตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:372 help.pm:530
#, fuzzy, c-format
msgid "Reload partition table"
msgstr "กู้ตารางพาร์ติชั่น"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr ""
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "เลือกไฟล์"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
"ต้องการทำต่อหรือไม่?"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"
#: diskdrake/interactive.pm:434
#, fuzzy, c-format
msgid "Detailed information"
msgstr "แสดงข้อมูล"
#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "เปลี่ยนขนาด"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "ฟอร์แมต"
#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "เพิ่มให้ RAID"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "เพิ่มให้ LVM"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "ลบออกจาก RAID"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "ลบออกจาก LVM"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "แก้ไข RAID"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "ใช้สำหรับ loopback"
#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "สร้างพาร์ติชั่นใหม่"
#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "เริ่มเซ็กเตอร์: "
#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "ขนาดเป็น MB: "
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "ประเภทของระบบไฟล์: "
#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "ข้อกำหนด: "
#: diskdrake/interactive.pm:528
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
#: diskdrake/interactive.pm:588
#, fuzzy, c-format
msgid "Remove the loopback file?"
msgstr "ฟอร์แมต loopback file %s"
#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"
#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "คุณต้องการเลือก filesystem ใด"
#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr ""
#: diskdrake/interactive.pm:657
#, fuzzy, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"
#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
#: diskdrake/interactive.pm:688
#, fuzzy, c-format
msgid "Where do you want to mount %s?"
msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "ปรับขนาด"
#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "คำนวณขอบเขตของระบบไฟล์"
#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"
#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"
#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"
#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "เลือกขนาดใหม่"
#: diskdrake/interactive.pm:761
#, fuzzy, c-format
msgid "New size in MB: "
msgstr "ขนาดเป็น MB: "
#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
#: diskdrake/interactive.pm:843
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"
#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
#, c-format
msgid "new"
msgstr "ใหม่"
#: diskdrake/interactive.pm:860
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"
#: diskdrake/interactive.pm:866
#, c-format
msgid "LVM name?"
msgstr "ชื่อ LVM"
#: diskdrake/interactive.pm:894
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""
#: diskdrake/interactive.pm:896
#, c-format
msgid "Moving physical extents"
msgstr ""
#: diskdrake/interactive.pm:914
#, c-format
msgid "This partition can not be used for loopback"
msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"
#: diskdrake/interactive.pm:927
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback file name: "
msgstr "ชื่อ Loopback file: "
#: diskdrake/interactive.pm:933
#, fuzzy, c-format
msgid "Give a file name"
msgstr "ชื่อเต็ม"
#: diskdrake/interactive.pm:936
#, fuzzy, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "File already used by another loopback, choose another one"
#: diskdrake/interactive.pm:937
#, c-format
msgid "File already exists. Use it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
#: diskdrake/interactive.pm:960
#, fuzzy, c-format
msgid "Mount options"
msgstr "อ๊อปชั่นของโมดูล:"
#: diskdrake/interactive.pm:967
#, c-format
msgid "Various"
msgstr ""
#: diskdrake/interactive.pm:1034
#, c-format
msgid "device"
msgstr "อุปกรณ์"
#: diskdrake/interactive.pm:1035
#, c-format
msgid "level"
msgstr "ระดับ"
#: diskdrake/interactive.pm:1036
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "ขนาดของ chunk"
#: diskdrake/interactive.pm:1053
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "ระวัง การทำงานนี้อันตราย"
#: diskdrake/interactive.pm:1068
#, c-format
msgid "What type of partitioning?"
msgstr "การทำ partitioning ชนิดใด?"
#: diskdrake/interactive.pm:1106
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"
#: diskdrake/interactive.pm:1138
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
#: diskdrake/interactive.pm:1154
#, fuzzy, c-format
msgid "Move files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
#: diskdrake/interactive.pm:1154 standalone/draksambashare:75
#: standalone/draksambashare:138
#, fuzzy, c-format
msgid "Hide files"
msgstr "mkraid failed"
#: diskdrake/interactive.pm:1155
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
#: diskdrake/interactive.pm:1166
#, fuzzy, c-format
msgid "Moving files to the new partition"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
#: diskdrake/interactive.pm:1170
#, c-format
msgid "Copying %s"
msgstr ""
#: diskdrake/interactive.pm:1174
#, fuzzy, c-format
msgid "Removing %s"
msgstr "ความละเอียดของภาพ %s\n"
#: diskdrake/interactive.pm:1188
#, c-format
msgid "partition %s is now known as %s"
msgstr ""
#: diskdrake/interactive.pm:1189
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""
#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
#, c-format
msgid "Device: "
msgstr "อุปกรณ์: "
#: diskdrake/interactive.pm:1210
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "ชื่อโฮสต์:"
#: diskdrake/interactive.pm:1211
#, c-format
msgid "Volume label: "
msgstr ""
#: diskdrake/interactive.pm:1212
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"
#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
#: diskdrake/interactive.pm:1289
#, c-format
msgid "Type: "
msgstr "ประเภท: "
#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "ชื่อ: "
#: diskdrake/interactive.pm:1227
#, c-format
msgid "Start: sector %s\n"
msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"
#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s"
msgstr "ขนาด: %s"
#: diskdrake/interactive.pm:1230
#, c-format
msgid ", %s sectors"
msgstr ", %s เซ็กเตอร์"
#: diskdrake/interactive.pm:1232
#, fuzzy, c-format
msgid "Cylinder %d to %d\n"
msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"
#: diskdrake/interactive.pm:1233
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1234
#, c-format
msgid "Formatted\n"
msgstr "ฟอร์แมต\n"
#: diskdrake/interactive.pm:1235
#, c-format
msgid "Not formatted\n"
msgstr "ยังไม่ได้ฟอร์แมต\n"
#: diskdrake/interactive.pm:1236
#, c-format
msgid "Mounted\n"
msgstr "เม้าท์\n"
#: diskdrake/interactive.pm:1237
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1242
#, fuzzy, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr "Loopback file(s): %s\n"
#: diskdrake/interactive.pm:1243
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
" (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"
#: diskdrake/interactive.pm:1245
#, c-format
msgid "Level %s\n"
msgstr "ระดับ %s\n"
#: diskdrake/interactive.pm:1246
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "ขนาดของ Chunk %s\n"
#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID-disks %s\n"
msgstr "ดิสก์แบบ RAID %s\n"
#: diskdrake/interactive.pm:1249
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback file name: %s"
#: diskdrake/interactive.pm:1252
#, fuzzy, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
"ปล่อยมันทิ้งไว้แบบนี้\n"
#: diskdrake/interactive.pm:1255
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
#: diskdrake/interactive.pm:1272
#, c-format
msgid "Read-only"
msgstr "อ่านได้อย่างเดียว"
#: diskdrake/interactive.pm:1273
#, c-format
msgid "Size: %s\n"
msgstr "ขนาด: %s\n"
#: diskdrake/interactive.pm:1274
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"
#: diskdrake/interactive.pm:1275
#, c-format
msgid "Info: "
msgstr "ข้อมูล: "
#: diskdrake/interactive.pm:1276
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-disks %s\n"
#: diskdrake/interactive.pm:1277
#, c-format
msgid "Partition table type: %s\n"
msgstr "ชนิดตารางพาร์ติชั่น: %s\n"
#: diskdrake/interactive.pm:1278
#, fuzzy, c-format
msgid "on channel %d id %d\n"
msgstr "บนบัส %d id %d\n"
#: diskdrake/interactive.pm:1321
#, fuzzy, c-format
msgid "Filesystem encryption key"
msgstr "ประเภทของระบบไฟล์: "
#: diskdrake/interactive.pm:1322
#, c-format
msgid "Choose your filesystem encryption key"
msgstr ""
#: diskdrake/interactive.pm:1325
#, fuzzy, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
#: diskdrake/interactive.pm:1326
#, fuzzy, c-format
msgid "The encryption keys do not match"
msgstr "รหัสผ่านไม่เหมือนกัน"
#: diskdrake/interactive.pm:1329 network/netconnect.pm:1018
#: standalone/drakconnect:419
#, c-format
msgid "Encryption key"
msgstr ""
#: diskdrake/interactive.pm:1330
#, c-format
msgid "Encryption key (again)"
msgstr ""
#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: diskdrake/removable.pm:46
#, fuzzy, c-format
msgid "Change type"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr ""
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, fuzzy, c-format
msgid "Domain Authentication Required"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Which username"
msgstr "ชื่อผู้ใช้"
#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
msgid "Another one"
msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3503
#, c-format
msgid "Username"
msgstr "ชื่อผู้ใช้"
#: diskdrake/smbnfs_gtk.pm:205
#, fuzzy, c-format
msgid "Search servers"
msgstr "เซิร์ฟเวอร์ DNS"
#: diskdrake/smbnfs_gtk.pm:210
#, fuzzy, c-format
msgid "Search new servers"
msgstr "เซิร์ฟเวอร์ DNS"
#: do_pkgs.pm:16 do_pkgs.pm:34
#, fuzzy, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr ""
"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
#: do_pkgs.pm:19 do_pkgs.pm:37 printer/printerdrake.pm:4026
#, fuzzy, c-format
msgid "Could not install the %s package!"
msgstr "กำลังติดตั้งแพ็คเก็จ %s"
#: do_pkgs.pm:24 do_pkgs.pm:42
#, c-format
msgid "Mandatory package %s is missing"
msgstr ""
#: do_pkgs.pm:187
#, fuzzy, c-format
msgid "Installing packages..."
msgstr "กำลังติดตั้งแพ็คเก็จ %s"
#: do_pkgs.pm:232
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "ความละเอียดของภาพ %s\n"
#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"
#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "กำลังสร้างและ format ไฟล์ %s"
#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"
#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"
#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Circular mounts %s\n"
#: fs/mount.pm:74
#, fuzzy, c-format
msgid "Mounting partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"
#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr ""
#: fs/mount.pm:80 fs/mount.pm:97
#, fuzzy, c-format
msgid "Checking %s"
msgstr "ความละเอียดของภาพ %s\n"
#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"
#: fs/mount.pm:142
#, fuzzy, c-format
msgid "Enabling swap partition %s"
msgstr "ฟอร์แมตพาร์ติชั่น %s"
#: fs/mount_options.pm:111
#, fuzzy, c-format
msgid "Use an encrypted file system"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
#: fs/mount_options.pm:113
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs/mount_options.pm:118
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:121
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:123
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs/mount_options.pm:127
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:131
#, c-format
msgid "Mount the file system read-only."
msgstr ""
#: fs/mount_options.pm:133
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:137
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs/mount_options.pm:143
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr ""
#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""
#: fs/type.pm:376
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"
#: fs/type.pm:377
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"
#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr ""
#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "เซิร์ฟเวอร์"
#: fsedit.pm:210
#, fuzzy, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
"ข้อความผิดพลาดคือ %s\n"
"\n"
"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"
#: fsedit.pm:378
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"
#: fsedit.pm:379
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr ""
#: fsedit.pm:380
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"
#: fsedit.pm:382
#, fuzzy, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"
#: fsedit.pm:387
#, c-format
msgid ""
"You can not use a LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""
#: fsedit.pm:389
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
#: fsedit.pm:393 fsedit.pm:395
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "This directory should remain within the root filesystem"
#: fsedit.pm:397 fsedit.pm:399
#, fuzzy, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
#: fsedit.pm:401
#, fuzzy, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
#: fsedit.pm:462
#, fuzzy, c-format
msgid "Not enough free space for auto-allocating"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"
#: fsedit.pm:464
#, c-format
msgid "Nothing to do"
msgstr ""
#: harddrake/data.pm:62 install_any.pm:1665
#, c-format
msgid "Floppy"
msgstr "ฟล้อปปี้"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "ซิปไดร์ฟ"
#: harddrake/data.pm:88 install_any.pm:1666
#, fuzzy, c-format
msgid "Hard Disk"
msgstr "เดนมาร์ก"
#: harddrake/data.pm:97 install_any.pm:1667
#, c-format
msgid "CDROM"
msgstr ""
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr ""
#: harddrake/data.pm:117
#, fuzzy, c-format
msgid "DVD-ROM"
msgstr "ซีดี-รอม"
#: harddrake/data.pm:127 standalone/drakbackup:2050
#, fuzzy, c-format
msgid "Tape"
msgstr "ประเภท"
#: harddrake/data.pm:136
#, fuzzy, c-format
msgid "Videocard"
msgstr "โหมดของการแสดงผล"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, fuzzy, c-format
msgid "Tvcard"
msgstr "TV card"
#: harddrake/data.pm:163
#, fuzzy, c-format
msgid "Other MultiMedia devices"
msgstr "อื่นๆ"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "การ์ดเสียง"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr ""
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr ""
#: harddrake/data.pm:209
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Internal ISDN card"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, fuzzy, c-format
msgid "Ethernetcard"
msgstr "Ethernet Card"
#: harddrake/data.pm:282 network/netconnect.pm:478
#, c-format
msgid "Modem"
msgstr "โมเด็ม"
#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""
#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "หน่วยความจำ"
#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr ""
#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:987
#, c-format
msgid "Printer"
msgstr "เครื่องพิมพ์"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Joystick"
#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr ""
#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr ""
#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr ""
#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr ""
#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr ""
#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr ""
#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr ""
#: harddrake/data.pm:420
#, fuzzy, c-format
msgid "USB ports"
msgstr "ไม่มีเครื่องพิมพ์"
#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr ""
#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr ""
#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:947 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "คีย์บอร์ด"
#: harddrake/data.pm:460
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:980
#, c-format
msgid "Mouse"
msgstr "Mouse"
#: harddrake/data.pm:483
#, fuzzy, c-format
msgid "UPS"
msgstr "HFS"
#: harddrake/data.pm:492
#, fuzzy, c-format
msgid "Scanner"
msgstr "เลือกกราฟฟิคการ์ด"
#: harddrake/data.pm:502 standalone/harddrake2:442
#, fuzzy, c-format
msgid "Unknown/Others"
msgstr "Generic"
#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr ""
#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "กรุณารอสักครู่ ..."
#: harddrake/sound.pm:228
#, c-format
msgid "No alternative driver"
msgstr ""
#: harddrake/sound.pm:229
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
#: harddrake/sound.pm:235
#, fuzzy, c-format
msgid "Sound configuration"
msgstr "การปรับแต่ง LAN"
#: harddrake/sound.pm:237
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:242
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
#: harddrake/sound.pm:244
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
#: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146
#, fuzzy, c-format
msgid "Driver:"
msgstr "Driver"
#: harddrake/sound.pm:263
#, c-format
msgid "Trouble shooting"
msgstr ""
#: harddrake/sound.pm:271 install_steps_interactive.pm:1309 keyboard.pm:391
#: network/ndiswrapper.pm:95 network/netconnect.pm:457
#: printer/printerdrake.pm:1429 printer/printerdrake.pm:2460
#: printer/printerdrake.pm:2559 printer/printerdrake.pm:2605
#: printer/printerdrake.pm:2672 printer/printerdrake.pm:2707
#: printer/printerdrake.pm:3032 printer/printerdrake.pm:3039
#: printer/printerdrake.pm:4025 printer/printerdrake.pm:4354
#: printer/printerdrake.pm:4474 printer/printerdrake.pm:5614
#: standalone/drakTermServ:326 standalone/drakTermServ:1205
#: standalone/drakTermServ:1266 standalone/drakTermServ:1931
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakups:27
#: standalone/harddrake2:479 standalone/localedrake:43
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "คำเตือน"
#: harddrake/sound.pm:271
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
#: harddrake/sound.pm:279
#, c-format
msgid "No open source driver"
msgstr ""
#: harddrake/sound.pm:280
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
#: harddrake/sound.pm:283
#, c-format
msgid "No known driver"
msgstr ""
#: harddrake/sound.pm:284
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr ""
#: harddrake/sound.pm:288
#, c-format
msgid "Unknown driver"
msgstr ""
#: harddrake/sound.pm:289
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr ""
#: harddrake/sound.pm:303
#, c-format
msgid "Sound trouble shooting"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:306
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
#: harddrake/sound.pm:332
#, c-format
msgid "Let me pick any driver"
msgstr ""
#: harddrake/sound.pm:335
#, c-format
msgid "Choosing an arbitrary driver"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:338
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "ตรวจสอบอัตโนมัติ"
#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, fuzzy, c-format
msgid "Unknown|Generic"
msgstr "Generic"
#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr ""
#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
#: harddrake/v4l.pm:407
#, fuzzy, c-format
msgid "Card model:"
msgstr "Card mem (DMA)"
#: harddrake/v4l.pm:408
#, fuzzy, c-format
msgid "Tuner type:"
msgstr "เปลี่ยนประเภทพาร์ติชั่น"
#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr ""
#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""
#: harddrake/v4l.pm:411
#, fuzzy, c-format
msgid "PLL setting:"
msgstr "ฟอร์แมต"
#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr ""
#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr ""
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
#: help.pm:14 install_steps_gtk.pm:559 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "ยอมรับ"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
#: help.pm:51 printer/printerdrake.pm:1886 printer/printerdrake.pm:2007
#: standalone/draksambashare:54
#, c-format
msgid "User name"
msgstr "ชื่อผู้ใช้"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:701 interactive.pm:432 interactive/newt.pm:321
#: network/thirdparty.pm:322 printer/printerdrake.pm:3962
#: standalone/drakTermServ:384 standalone/drakbackup:3954
#: standalone/drakbackup:4048 standalone/drakbackup:4065
#: standalone/drakbackup:4083 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Next"
#: help.pm:51
#, fuzzy, c-format
msgid "Do you want to use this feature?"
msgstr "คุณต้องการใช้ aboot หรือไม่"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
#: help.pm:146 share/compssUsers.pl:24
#, fuzzy, c-format
msgid "Workstation"
msgstr "Workstation ที่ทำงาน"
#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "พัฒนาซอฟท์แวร์ (Development)"
#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "การทำงานแบบกราฟฟิก"
#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:645
#, c-format
msgid "Individual package selection"
msgstr "Individual package selection"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "อัพเกรด"
#: help.pm:146 install_steps_interactive.pm:603
#, c-format
msgid "With X"
msgstr ""
#: help.pm:146
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "ตำแหน่ง"
#: help.pm:146
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "ออกจากการติดตั้ง"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904
#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2517
#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:917 wizards.pm:156
#, c-format
msgid "No"
msgstr "ไม่ต้อง"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2517
#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:917 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "ใช่"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:614
#: standalone/drakbackup:2341 standalone/drakbackup:2345
#: standalone/drakbackup:2349 standalone/drakbackup:2353
#, c-format
msgid "Configure"
msgstr "การปรับแต่ง"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
#: help.pm:217 install_steps_interactive.pm:882
#, fuzzy, c-format
msgid "Hardware clock set to GMT"
msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
#: help.pm:217
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Boot Style Configuration"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "ใช้พื้นที่ที่ว่าง"
#: help.pm:374
#, fuzzy, c-format
msgid "Use existing partition"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "ลบ disk ทั้งหมด"
#: help.pm:374
#, fuzzy, c-format
msgid "Remove Windows"
msgstr "ลบ Windows(TM)"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "กำลังพาร์ติชั่น Custom disk"
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
#: help.pm:409
#, fuzzy, c-format
msgid "Generate auto-install floppy"
msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
#: help.pm:409 install_steps_interactive.pm:1335
#, c-format
msgid "Replay"
msgstr "เรียกอีกครั้ง"
#: help.pm:409 install_steps_interactive.pm:1335
#, c-format
msgid "Automated"
msgstr "อัตโนมัติ"
#: help.pm:409 install_steps_interactive.pm:1338
#, c-format
msgid "Save packages selection"
msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:433
#: interactive/newt.pm:318 printer/printerdrake.pm:3960
#: standalone/drakTermServ:363 standalone/drakbackup:3914
#: standalone/drakbackup:3953 standalone/drakbackup:4064
#: standalone/drakbackup:4079 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "ก่อน"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157 standalone/drakbackup:4111
#, c-format
msgid "Install"
msgstr "ติดตั้ง"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
#: help.pm:458
#, fuzzy, c-format
msgid "Security Administrator"
msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr ""
#: help.pm:530
#, fuzzy, c-format
msgid "Toggle between normal/expert mode"
msgstr "สำหรับผู้ชำนาญ > ปกติ"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
#: help.pm:681
#, fuzzy, c-format
msgid "with Wheel emulation"
msgstr "Logitech MouseMan"
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr ""
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
#: help.pm:722
#, fuzzy, c-format
msgid "authentication"
msgstr "การตรวจสอบสิทธิ์การใช้งาน"
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""
#: help.pm:765 printer/cups.pm:115 printer/data.pm:121
#, c-format
msgid "CUPS"
msgstr ""
#: help.pm:765
#, fuzzy, c-format
msgid "Expert"
msgstr "โหมดผู้เชี่ยวชาญ"
#: help.pm:768
#, fuzzy, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX จะพยายามหา PCI SCSI adapter(s) ถ้า DrakX\n"
"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
"ถูกติดตั้งโดยออโตเมติก\n"
"\n"
"\n"
"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
"ไม่สามารถหาเจอ คุณจะโดนถามว่ามี SCSI adapter ในเครื่องของคุณ\n"
"หรือไม่ ถ้าไม่มีกรุณากดที่ \"ไม่\" แต่ถ้าคุณกดลงที่ \"ไช่\" คุณจะต้องเลือก\n"
"ชนิดของ adapter ที่คุณมีอยู่\n"
"\n"
"\n"
"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
"Option หรือไม่ ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
"\n"
"\n"
"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง คุณควรหาข้อมูลเพิ่ม\n"
"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"
#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""
#: help.pm:788 help.pm:855 install_steps_interactive.pm:1014
#: install_steps_interactive.pm:1031
#, c-format
msgid "Sound card"
msgstr "Sound card"
#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandriva Linux Control Center after the installation has finished to "
"benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandriva Linux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""
#: help.pm:855 install_steps_interactive.pm:878
#: install_steps_interactive.pm:973 standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "โซนเวลา"
#: help.pm:855 install_steps_interactive.pm:1047
#, c-format
msgid "TV card"
msgstr "TV card"
#: help.pm:855
#, fuzzy, c-format
msgid "ISDN card"
msgstr "Internal ISDN card"
#: help.pm:855
#, fuzzy, c-format
msgid "Graphical Interface"
msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
#: help.pm:855 install_any.pm:1688 install_steps_interactive.pm:1065
#: standalone/drakbackup:2035
#, c-format
msgid "Network"
msgstr "ระบบเครือข่าย"
#: help.pm:855 install_steps_interactive.pm:1077
#, fuzzy, c-format
msgid "Proxies"
msgstr "Profile: "
#: help.pm:855 install_steps_interactive.pm:1088
#, c-format
msgid "Security Level"
msgstr "ระดับความปลอดภัย"
#: help.pm:855 install_steps_interactive.pm:1102 network/drakfirewall.pm:182
#, c-format
msgid "Firewall"
msgstr ""
#: help.pm:855 install_steps_interactive.pm:1118
#, fuzzy, c-format
msgid "Bootloader"
msgstr "Bootloader ที่จะใช้"
#: help.pm:855 install_steps_interactive.pm:1131 services.pm:114
#: services.pm:157 services.pm:193
#, c-format
msgid "Services"
msgstr "บริการ"
#: help.pm:858
#, fuzzy, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandriva Linux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"เลือก harddisk ที่ต้องการลบและลง Mandriva Linux\n"
"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
"และจะไม่สามารถกู้คืนได้"
#: help.pm:863
#, fuzzy, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
"\n"
"\n"
"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"
#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "Next ->"
#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- ก่อน"
#: install2.pm:115
#, c-format
msgid ""
"Can not access kernel modules corresponding to your kernel (file %s is "
"missing), this generally means your boot floppy in not in sync with the "
"Installation medium (please create a newer boot floppy)"
msgstr ""
#: install2.pm:169
#, c-format
msgid "You must also format %s"
msgstr ""
#: install_any.pm:405
#, fuzzy, c-format
msgid "Do you have further supplementary media?"
msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:408
#, fuzzy, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
#: install_any.pm:421 printer/printerdrake.pm:3290
#: printer/printerdrake.pm:3297 standalone/scannerdrake:182
#: standalone/scannerdrake:190 standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "ซีดี-รอม"
#: install_any.pm:421
#, fuzzy, c-format
msgid "Network (HTTP)"
msgstr "Network interface"
#: install_any.pm:421
#, fuzzy, c-format
msgid "Network (FTP)"
msgstr "Network interface"
#: install_any.pm:421
#, c-format
msgid "Network (NFS)"
msgstr ""
#: install_any.pm:451
#, c-format
msgid "Insert the CD 1 again"
msgstr ""
#: install_any.pm:477 standalone/drakbackup:112
#, fuzzy, c-format
msgid "No device found"
msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
#: install_any.pm:482
#, c-format
msgid "Insert the CD"
msgstr ""
#: install_any.pm:487
#, fuzzy, c-format
msgid "Unable to mount CD-ROM"
msgstr "ไม่สามารถ forkได้.%s"
#: install_any.pm:520 install_any.pm:539
#, c-format
msgid "URL of the mirror?"
msgstr ""
#: install_any.pm:525
#, c-format
msgid "NFS setup"
msgstr ""
#: install_any.pm:525
#, c-format
msgid "Please enter the hostname and directory of your NFS media"
msgstr ""
#: install_any.pm:526
#, c-format
msgid "Hostname of the NFS mount ?"
msgstr ""
#: install_any.pm:526
#, c-format
msgid "Directory"
msgstr ""
#: install_any.pm:575
#, fuzzy, c-format
msgid ""
"Can't find a package list file on this mirror. Make sure the location is "
"correct."
msgstr "Adapter %s: %s"
#: install_any.pm:740
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
"done."
msgstr ""
"เปลี่ยน CD-ROM\n"
"\n"
"กรุณาใส่ CD-ROM \"%s\" และกด OK"
#: install_any.pm:753
#, fuzzy, c-format
msgid "Copying in progress"
msgstr "ค้นหาเจอบน port %s"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:895
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:918
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
#: install_any.pm:1354 partition_table.pm:597
#, c-format
msgid "Error reading file %s"
msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
#: install_any.pm:1585
#, fuzzy, c-format
msgid "The following disk(s) were renamed:"
msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
#: install_any.pm:1587
#, c-format
msgid "%s (previously named as %s)"
msgstr ""
#: install_any.pm:1625
#, c-format
msgid ""
"An error occurred - no valid devices were found on which to create new "
"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"
#: install_any.pm:1669
#, c-format
msgid "HTTP"
msgstr "HTTP"
#: install_any.pm:1669
#, c-format
msgid "FTP"
msgstr "FTP"
#: install_any.pm:1669
#, c-format
msgid "NFS"
msgstr "NFS"
#: install_any.pm:1692
#, fuzzy, c-format
msgid "Please choose a media"
msgstr "กรุณาเลือก"
#: install_any.pm:1708
#, fuzzy, c-format
msgid "File already exists. Overwrite it?"
msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
#: install_any.pm:1712
#, c-format
msgid "Permission denied"
msgstr "สิทธิการทำงานถูกปฎิเสท"
#: install_any.pm:1761
#, c-format
msgid "Bad NFS name"
msgstr ""
#: install_any.pm:1782
#, fuzzy, c-format
msgid "Bad media %s"
msgstr "อุปกรณ์ที่ถูกเพิ่มเข้ามา %s"
#: install_any.pm:1829
#, fuzzy, c-format
msgid "Can not make screenshots before partitioning"
msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
#: install_any.pm:1836
#, fuzzy, c-format
msgid "Screenshots will be available after install in %s"
msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
#: install_gtk.pm:136
#, fuzzy, c-format
msgid "System installation"
msgstr "การติดตั้ง SILO"
#: install_gtk.pm:139
#, fuzzy, c-format
msgid "System configuration"
msgstr "การคอนฟิก"
#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"hardware บางชนิดต้องการ driver พิเศษ\n"
"คุณสามารถหาข้อมูลได้จาก: %s"
#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"คุณต้องมี root พาร์ติชั่น\n"
"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"
#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
"\n"
"ต้องการจะทำต่อหรือไม่?"
#: install_interactive.pm:70 install_steps.pm:218
#, fuzzy, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "ใช้พาร์ติชั่นที่มีอยู่"
#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"
#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "ใช้ windows partion สำหรับการ Loopback"
#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"
#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "เลือกขนาด"
#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "ขนาดของพาร์ติชั่นรูท MB:"
#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "
#: install_interactive.pm:130
#, fuzzy, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"
#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
"มีข้อผิดพลาดนี้เกิดขึ้น: %s"
#: install_interactive.pm:156
#, fuzzy, c-format
msgid "Computing the size of the Windows partition"
msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
#: install_interactive.pm:163
#, c-format
msgid ""
"Your Windows partition is too fragmented. Please reboot your computer under "
"Windows, run the ``defrag'' utility, then restart the Mandriva Linux "
"installation."
msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, fuzzy, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"ระวัง!\n"
"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่ และคุณสมควรที่จะทำการ\n"
"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
"เมื่อคุณแน่ใจแล้ว กด OK"
#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"
#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "พาร์ติชั่น %s"
#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"
#: install_interactive.pm:208
#, fuzzy, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "ลบ Windows(TM)"
#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "คุณมี harddisk มากกว่า 1 ตัว คุณต้องการลง linux บน harddisk ตัวใหน"
#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"
#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "ใช้ fdisk"
#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"
#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"
#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"
#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "การทำพาร์ติชั่นล้มเหลว: %s"
#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"
#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, fuzzy, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandriva Linux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A. \n"
msgstr ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandriva "
"Linux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products "
"include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related "
"to the operating \n"
"system and the different components of the Mandriva Linux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement "
"between you and \n"
"Mandriva S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you "
"explicitly \n"
"accept and fully agree to conform to the terms and conditions of this "
"License. \n"
"If you disagree with any portion of the License, you are not allowed to "
"install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner "
"which does not comply \n"
"with the terms and conditions of this License is void and will terminate "
"your rights under this \n"
"License. Upon termination of the License, you must immediately destroy all "
"copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", "
"with no warranty, to the \n"
"extent permitted by law.\n"
"Mandriva S.A. will, in no circumstances and to the extent permitted by law, "
"be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without "
"limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties "
"resulting from a court \n"
"judgment, or any other consequential loss) arising out of the use or "
"inability to use the Software \n"
"Products, even if Mandriva S.A. has been advised of the possibility or "
"occurence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
"COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandriva S.A. or its distributors will, in "
"no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever "
"(including without \n"
"limitation damages for loss of business, interruption of business, financial "
"loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential "
"loss) arising out \n"
"of the possession and use of software components or arising out of "
"downloading software components \n"
"from one of Mandriva Linux sites which are prohibited or restricted in some "
"countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong "
"cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
"entities. Most \n"
"of these components are governed under the terms and conditions of the GNU "
"General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
"licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please "
"read carefully the terms \n"
"and conditions of the license agreement for each component before using any "
"component. Any question \n"
"on a component license should be addressed to the component author and not "
"to Mandriva.\n"
"The programs developed by Mandriva S.A. are governed by the GPL License. "
"Documentation written \n"
"by Mandriva S.A. is governed by a specific license. Please refer to the "
"documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their "
"respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software "
"programs.\n"
"Mandriva S.A. reserves its rights to modify or adapt the Software Products, "
"as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandriva\", \"Mandriva Linux\" and associated logos are trademarks of "
"Mandriva S.A. \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a "
"court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other "
"applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of "
"France.\n"
"All disputes on the terms of this license will preferably be settled out of "
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
"For any question on this document, please contact Mandriva S.A. \n"
#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, "
"the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a "
"patent\n"
"may be applicable to you, check your local laws."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer, duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
#: install_messages.pm:131
#, fuzzy, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandriva "
"Linux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandriva Linux User's Guide."
msgstr ""
"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
"\n"
"\n"
"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
"โปรดอ่าน Errata ได้ที่ \n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
|