# translation of DrakX-sl.po to
# translation of DrakX-sl.po to Slovenščina
# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
# Matjaž Kaše <matjaz.kase@g-kabel.si>, 2004.
# Aljoša Ločičnik <aljosa.locicnik@mandrakeprinas.org>, 2005.
# Gregor Pirnaver <gregor.pirnaver@sdm-si.org>, 2002,2004,2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX-sl\n"
"POT-Creation-Date: 2005-07-27 17:26+0200\n"
"PO-Revision-Date: 2005-04-02 09:47+0200\n"
"Last-Translator: Gregor Pirnaver <gregor.pirnaver@sdm-si.org>\n"
"Language-Team: <sl@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.9.1\n"
"Plural-Forms: nplurals=4; plural=(n%100==1 ? 0 : n%100==2 ? 1 : n%100==3 || "
"n%100==4 ? 2 : 3);\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Kateri USB ključ želite formatirati?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Formatirali boste sledečo USB napravo \"%s\". S tem boste izgubili vse "
"podatke na tej \n"
"napravi.\n"
"Prepričajte se da je izbrani USB ključ naprava, ki jo želite formatirati. \n"
"Priporočamo vam, da med to operacijo odklopite vse druge USB naprave za "
"shranjevanje podatkov"
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Zapisovanje na ključ ni mogoče."
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"Izgleda, da ima ključ omogočeno zaščito pred pisanjem. Prosimo,\n"
" da ga odklopite, odstranite zaščito in ga ponovno priklopite."
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Poizkusi ponovno"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Nadaljuj brez USB ključa"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Izgleda, da ima ključ omogočeno zaščito pred pisanjem, vendar ga trenutno\n"
"ni mogoče odklopiti.\n"
"\n"
"\n"
"Kliknite gumb za ponoven zagon računalnika, odklopite ključ, odstranite\n"
"zaščito, priklopite USB ključ in ponovno zaženite Mandriva Move."
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319
#, c-format
msgid "Reboot"
msgstr "Ponovni zagon"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Na vašem USB ključu ni veljavnega razdelka FAT za Okna,\n"
"ki je potreben za nadaljevanje. Poleg tega vam takšen razdelek \n"
"omogoča dostop do vaših podatkov na računalnikih, na katerih\n"
"tečejo Okna. Prosim, priklopite USB ključ, ki vsebuje FAT razdelek.\n"
"\n"
"\n"
"Nadaljujete lahko tudi brez USB ključa. Še vedno boste lahko\n"
"Mandriva Move uporabljali kot normalno živo distribucijo\n"
"operacijskega sistema Mandriva Linux."
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Sistem na vašem računalniku ni zaznal USB ključa. Če ga priključite\n"
" sedaj, bo lahko Mandriva Move shranil podatke v vašem domačem\n"
"imeniku in vaše sistemske nastavitve, ki jih bo uporabil ob naslednjem\n"
"zagonu na tem ali kakšnem drugem računalniku.\n"
"Opozorilo: Če ključ priključite zdaj, počakajte nekaj sekund preden\n"
"zaženete ponovno zaznavanje USB ključa.\n"
"\n"
"\n"
"Nadaljujete lahko tudi brez USB ključa. Še vedno boste lahko\n"
"Mandriva Move uporabljali kot normalno živo distribucijo\n"
"operacijskega sistema Mandriva Linux."
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Za shranjevanje vaših podatkov potrebujete USB ključ"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Ponovno zaznavanje USB ključa"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Nastavljanje USB ključa"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr ""
"Prosimo počakajte; ustvarjam datoteke za sistemske nastavitve na USB "
"ključu..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Vnesite svoje uporabniške podatke. Geslo bo uporabljeno za ohranjevalnik "
"zaslona."
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Samodejna nastavitev"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Prosimo, počakajte, zaznavanje in nastavljanje naprav..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209
#: install_any.pm:1730 install_any.pm:1782 install_steps.pm:81
#: install_steps_interactive.pm:37 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:819 network/netconnect.pm:923
#: network/netconnect.pm:927 network/netconnect.pm:931
#: network/netconnect.pm:936 network/netconnect.pm:1066
#: network/netconnect.pm:1070 network/netconnect.pm:1074
#: network/netconnect.pm:1078 network/netconnect.pm:1186
#: network/netconnect.pm:1191 network/netconnect.pm:1211
#: network/netconnect.pm:1364 network/thirdparty.pm:266
#: network/thirdparty.pm:273 network/thirdparty.pm:309
#: network/thirdparty.pm:311 network/thirdparty.pm:332
#: network/thirdparty.pm:356 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305
#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406
#: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592
#: standalone/drakTermServ:393 standalone/drakTermServ:467
#: standalone/drakTermServ:476 standalone/drakTermServ:771
#: standalone/drakTermServ:778 standalone/drakTermServ:801
#: standalone/drakTermServ:848 standalone/drakTermServ:1056
#: standalone/drakTermServ:1536 standalone/drakTermServ:1552
#: standalone/drakTermServ:1557 standalone/drakTermServ:1565
#: standalone/drakTermServ:1577 standalone/drakTermServ:1598
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1645 standalone/drakbackup:1801
#: standalone/drakbackup:2415 standalone/drakbackup:4104
#: standalone/drakbackup:4324 standalone/drakclock:124
#: standalone/drakconnect:672 standalone/drakconnect:676
#: standalone/drakconnect:681 standalone/drakconnect:696
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakgw:217
#: standalone/drakgw:258 standalone/drakgw:292 standalone/drakgw:394
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:597 standalone/draknfs:604 standalone/draknfs:611
#: standalone/drakroam:41 standalone/draksplash:15 standalone/draksplash:159
#: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168
#: standalone/logdrake:437 standalone/logdrake:442 standalone/net_applet:160
#: standalone/scannerdrake:59 standalone/scannerdrake:202
#: standalone/scannerdrake:261 standalone/scannerdrake:715
#: standalone/scannerdrake:726 standalone/scannerdrake:865
#: standalone/scannerdrake:876 standalone/scannerdrake:946 wizards.pm:95
#: wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Napaka"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Prišlo je do napake, ki je sistem na ustrezen način ne zna odpraviti.\n"
"Nadaljujte na lastno odgovornost."
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Prišlo je do napake"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Prišlo je do napake:\n"
"\n"
"\n"
"%s\n"
"\n"
"Do tega lahko pride zaradi poškodovanih nastavitvenih\n"
"datotek na USB ključu. V tem primeru bo pomagalo, če jih\n"
"odstranite in ponovno zaženete Mandriva Move. To storite\n"
"tako, da kliknete ustrezen gumb.\n"
"\n"
"\n"
"Lahko tudi ponovno zaženete računalnik in odstranite\n"
"USB ključ ter ga pregledate s kakšnim drugim operacijskim\n"
"sistemom."
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Odstrani datoteke s sistemskimi nastavitvami."
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Ponovni zagon"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Poganjate lahko samo brez podpore za CD-ROM"
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Pobij te programe"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Brez podpore za CD-ROM"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1046 diskdrake/interactive.pm:1056
#: diskdrake/interactive.pm:1109
#, c-format
msgid "Read carefully!"
msgstr "Pazljivo preberite!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr "Kadar tečejo programi:%s, ne morete uporabljati druge zgoščenke"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Kopiranje v spomin, da bo mogoče odstraniti zgoščenko"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB ali več"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "Strežnik X"
#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "Izberite strežnik X"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Nastavitev več grafičnih kartic"
#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Vaš sistem podpira nastavitev z več karticami.\n"
"Kaj želite storiti?"
#: Xconfig/card.pm:258
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Paketa Xorg %s ni mogoče namestiti."
#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Izberite velikost pomnilnika grafične kartice"
#: Xconfig/card.pm:345
#, c-format
msgid "Xorg configuration"
msgstr "Nastavitev Xorg"
#: Xconfig/card.pm:347
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Katero nastavitev strežnika Xorg želite?"
#: Xconfig/card.pm:380
#, c-format
msgid "Configure all heads independently"
msgstr "Nastavi vsako grafično kartico posebej"
#: Xconfig/card.pm:381
#, c-format
msgid "Use Xinerama extension"
msgstr "Uporabi razširitev Xinerama"
#: Xconfig/card.pm:386
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Nastavi samo kartico \"%s\"%s"
#: Xconfig/card.pm:398 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:405 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s s strojnim 3D pospeševanjem"
#: Xconfig/card.pm:407
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Vaša kartica lahko uporablja strojno 3D pospeševanje z Xorg %s."
#: Xconfig/card.pm:413
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s s strojnim 3D pospeševanjem (POSKUSNO!)"
#: Xconfig/card.pm:415
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Vaša kartica lahko uporablja strojno 3D pospeševanje z Xorg %s,\n"
"PODPORA JE ŠE V RAZVOJU, RAČUNALNIK SE LAHKO PRENEHA ODZIVATI."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963
#, c-format
msgid "Custom"
msgstr "Razno"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:85 install_steps_interactive.pm:1319
#: printer/printerdrake.pm:744 printer/printerdrake.pm:4401
#: printer/printerdrake.pm:4853 standalone/drakhosts:263 standalone/drakids:69
#: standalone/drakids:77 standalone/draksplash:85 standalone/logdrake:173
#: standalone/net_applet:81 standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Izhod"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Grafična kartica"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Zaslon"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286
#, c-format
msgid "Resolution"
msgstr "Ločljivost"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Preizkus"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "Možnosti"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "Vaše nastavitve za Xorg so napačne, zato ne bodo upoštevane."
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Ohrani spremembe?\n"
"Trenutna nastavitev:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Izberite zaslon za izhod (head) #%d"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Izberite zaslon"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Splošno"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Proizvajalec"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr ""
"Poizkus nastavitve Plug'n Play ni uspel. Prosim, izberite pravi zaslon:"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Kritična parametra sta: navpično osveževanje(hitrost, s katero se osvežuje "
"celoten zaslon) in najbolj pomembno, vodoravno osveževanje (hitrost, s "
"katero se osvežujejo vrstice).\n"
"\n"
"ZELO POMEMBNO je, da ne izberete zaslona z osvežitvami, ki presegajo "
"zmožnosti vašega zaslona, ker s tem lahko poškodujete zaslon!\n"
"Če ste v dvomih, izberite konservativno nastavitev."
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Vodoravno osveževanje"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Navpično osveževanje"
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 barv (8 bitov)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 tisoč barv (15 bitov)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 tisoč barv (16 bitov)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 milijonov barv (24 bitov)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Ločljivosti"
#: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1583 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Drugo"
#: Xconfig/resolution_and_depth.pm:357
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Izberite ločljivost in barvno globino"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Graphics card: %s"
msgstr "Grafična kartica: %s"
#: Xconfig/resolution_and_depth.pm:372 interactive.pm:432
#: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:200 standalone/drakTermServ:518
#: standalone/drakbackup:1347 standalone/drakbackup:3961
#: standalone/drakbackup:4021 standalone/drakbackup:4065
#: standalone/drakconnect:158 standalone/drakconnect:848
#: standalone/drakconnect:935 standalone/drakconnect:1031
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:169 standalone/drakups:212 standalone/net_monitor:340
#: ugtk2.pm:412 ugtk2.pm:510 ugtk2.pm:916 ugtk2.pm:939
#, c-format
msgid "Ok"
msgstr "V redu"
#: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:215 standalone/drakbackup:1347
#: standalone/drakbackup:3887 standalone/drakbackup:3891
#: standalone/drakbackup:3949 standalone/drakconnect:157
#: standalone/drakconnect:933 standalone/drakconnect:1030
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:169 standalone/drakups:219 standalone/logdrake:173
#: standalone/net_monitor:339 ugtk2.pm:406 ugtk2.pm:508 ugtk2.pm:517
#: ugtk2.pm:916
#, c-format
msgid "Cancel"
msgstr "Prekliči"
#: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527
#: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:285
#: standalone/drakbackup:3883 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:509 standalone/draknfs:208 standalone/drakperm:133
#: standalone/draksec:336 standalone/draksec:338 standalone/draksec:356
#: standalone/draksec:358 ugtk2.pm:1048 ugtk2.pm:1049
#, c-format
msgid "Help"
msgstr "Pomoč"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Preizkus nastavitev"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Želite preizkusiti nastavitev?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr ""
"Pozor: preizkušanje te grafične kartice lahko povzroči, da se računalnik "
"preneha odzivati."
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Prišlo je do napake:\n"
"%s\n"
"Spremenite katero od nastavitev"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Še %d sekund"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Je to prava nastavitev?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Razpored tipkovnice: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Vrsta miške: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Miška: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Zaslon: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Vodoravna frekvenca zaslona: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Navpična frekvenca zaslona: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafična kartica: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Grafični pomnilnik: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Barvna globina: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Ločljivost: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Gonilnik Xorg: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "Grafični vmesnik ob zagonu"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Računalnik lahko samodejno pri zagonu sistema zažene strežnik X.\n"
"Želite zagnati strežnik X pri zagonu?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Izgleda, da ima vaša grafična kartica TV izhod.\n"
"Lahko mu določite uporabo medpomnilnika.\n"
"\n"
"Da bi to dosegli, morate grafično kartico povezati s TV sprejemnikom, preden "
"zaženete računalnik,\n"
"nato pa izbrati vnos \"TVout\" v zagonskem nalagalniku.\n"
"\n"
"Ima vaša kartica TV izhod?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Kateri standard uporablja vaš TV sprejemnik?"
#: Xconfig/xfree.pm:646
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "ostalo"
#: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
#: standalone/service_harddrake:206
#, c-format
msgid "Please wait"
msgstr "Prosim, počakajte!"
#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Teče nameščanje zagonskega nalagalnika."
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO želi nastaviti nov ID enoti pogona %s. Vendar je spreminjanje ID enote\n"
"zagonskega diska za Windows NT, 2000 ali XP za Windows usodna napaka.\n"
"To opozorilo ne velja za Windows 95 ali 98, oz. podatkovne diske NT.\n"
"\n"
"Nastavim nov ID enoti?"
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr ""
"Namestitev zagonskega nalagalnika ni uspela. Prišlo je do naslednje napake:"
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Da bi omogočili zagonski nalagalnik, boste verjetno morali\n"
"zamenjati zagonsko napravo Open Firmware.\n"
"Če se ob ponovnem zagonu ne prikaže okno za nastavitev\n"
"zagona, držite \"Command-Option-O-F\" med ponovnim zagonom\n"
"in vpišite \"setenv boot-device %s,\\\\:tbxi\"\n"
"in nato še \"shut-down\"\n"
"Ob naslednjem zagonu se bo pojavilo zagonsko okno."
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Odločili ste se za namestitev zagonskega nalagalnika na razdelek.\n"
"Kaže, da imate na trdem disku že nameščen zagonski nalagalnik (n.pr. System "
"Commander).\n"
"Kako se zaganja vaš računalnik?"
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Na prvi sektor pogona (MBR)"
#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Na prvi sektor korenskega razdelka"
#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "Na zagonsko disketo"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "Preskoči"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Namestitev LILO/grub"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Kam želite namestiti zagonski nalagalnik?"
#: any.pm:267 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "Nastavitev zagonskega stila"
#: any.pm:269 any.pm:301
#, c-format
msgid "Bootloader main options"
msgstr "Glavne možnosti zagonskega nalagalnika"
#: any.pm:273
#, c-format
msgid "Give the ram size in MB"
msgstr "Navedite velikost pomnilnika v MB"
#: any.pm:275
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "Možnost ``Omejitev možnosti ukazne vrstice'' ni uporabna brez gesla"
#: any.pm:276 any.pm:609 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "Gesli se ne ujemata."
#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1306
#, c-format
msgid "Please try again"
msgstr "Prosim, poskusite ponovno!"
#: any.pm:281 any.pm:304
#, c-format
msgid "Bootloader to use"
msgstr "Kateri zagonski nalagalnik želite uporabiti?"
#: any.pm:283 any.pm:306
#, c-format
msgid "Boot device"
msgstr "Zagonska naprava"
#: any.pm:285
#, c-format
msgid "Delay before booting default image"
msgstr "Pavza pred zaganjanjem privzete slike"
#: any.pm:286
#, c-format
msgid "Enable ACPI"
msgstr "Omogoči ACPI"
#: any.pm:288
#, c-format
msgid "Force no APIC"
msgstr "Onemogoči APIC"
#: any.pm:290
#, c-format
msgid "Force No Local APIC"
msgstr "Prisili \"No Local APIC\""
#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179
#: network/netconnect.pm:573 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1627
#: standalone/drakbackup:3490 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Geslo"
#: any.pm:293 any.pm:644 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "Geslo (ponovno)"
#: any.pm:294
#, c-format
msgid "Restrict command line options"
msgstr "Omejitev možnosti ukazne vrstice"
#: any.pm:294
#, c-format
msgid "restrict"
msgstr "omeji"
#: any.pm:296
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Ob vsakem zagonu počisti /tmp"
#: any.pm:297
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Natančna velikost pomnilnika RAM, če je potrebno (najdeno %d MB)"
#: any.pm:305
#, c-format
msgid "Init Message"
msgstr "Začetno (init) sporočilo"
#: any.pm:307
#, c-format
msgid "Open Firmware Delay"
msgstr "Pavza pred zagonom Open Firmware"
#: any.pm:308
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Pavza pred zagonom jedra"
#: any.pm:309
#, c-format
msgid "Enable CD Boot?"
msgstr "Omogočim zagon s CD pogona?"
#: any.pm:310
#, c-format
msgid "Enable OF Boot?"
msgstr "Izbira zagona OF?"
#: any.pm:311
#, c-format
msgid "Default OS?"
msgstr "Privzeti operacijski sistem?"
#: any.pm:364
#, c-format
msgid "Image"
msgstr "Slika"
#: any.pm:365 any.pm:375
#, c-format
msgid "Root"
msgstr "Korenski razdelek"
#: any.pm:366 any.pm:388
#, c-format
msgid "Append"
msgstr "Pripni"
#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "Grafični način"
#: any.pm:370
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:371
#, c-format
msgid "Network profile"
msgstr "Omrežni profil"
#: any.pm:380 any.pm:385 any.pm:387
#, c-format
msgid "Label"
msgstr "Oznaka"
#: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Privzeto"
#: any.pm:389
#, c-format
msgid "Initrd-size"
msgstr "Velikost initrd"
#: any.pm:391
#, c-format
msgid "NoVideo"
msgstr "Brez grafike"
#: any.pm:402
#, c-format
msgid "Empty label not allowed"
msgstr "Oznaka ne sme biti prazna"
#: any.pm:403
#, c-format
msgid "You must specify a kernel image"
msgstr "Določiti morate sliko jedra."
#: any.pm:403
#, c-format
msgid "You must specify a root partition"
msgstr "Določiti morate korenski razdelek."
#: any.pm:404
#, c-format
msgid "This label is already used"
msgstr "Ta oznaka je že uporabljena."
#: any.pm:418
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Kakšno vrsto vnosa želite dodati?"
#: any.pm:419
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:419
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Drug OS (SunOS...)"
#: any.pm:420
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Drug OS (MacOS...)"
#: any.pm:420
#, c-format
msgid "Other OS (Windows...)"
msgstr "Drug OS (Windows...)"
#: any.pm:448
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"To so dosedanje možnosti zagona.\n"
"Lahko dodajate nove ali spreminjate obstoječe."
#: any.pm:595
#, c-format
msgid "access to X programs"
msgstr "dostop do programov X"
#: any.pm:596
#, c-format
msgid "access to rpm tools"
msgstr "dostop do rpm orodij"
#: any.pm:597
#, c-format
msgid "allow \"su\""
msgstr "omogoči nadomestnega uporabnika \"su\""
#: any.pm:598
#, c-format
msgid "access to administrative files"
msgstr "dostop do upraviteljskih datotek"
#: any.pm:599
#, c-format
msgid "access to network tools"
msgstr "dostop do mrežnih orodij"
#: any.pm:600
#, c-format
msgid "access to compilation tools"
msgstr "dostop do orodij za prevajanje (compilation tools)"
#: any.pm:605
#, c-format
msgid "(already added %s)"
msgstr "(že dodano %s)"
#: any.pm:610
#, c-format
msgid "This password is too simple"
msgstr "Geslo je preveč preprosto."
#: any.pm:611
#, c-format
msgid "Please give a user name"
msgstr "Vnesite uporabniško ime:"
#: any.pm:612
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Uporabniško ime mora vsebovati samo male črke, številke, `-' in `_'"
#: any.pm:613
#, c-format
msgid "The user name is too long"
msgstr "Uporabniško ime je predolgo."
#: any.pm:614
#, c-format
msgid "This user name has already been added"
msgstr "To uporabniško ime je že dodano."
#: any.pm:615 any.pm:646
#, c-format
msgid "User ID"
msgstr "ID uporabnika"
#: any.pm:616 any.pm:647
#, c-format
msgid "Group ID"
msgstr "ID skupine"
#: any.pm:619
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "Nastavitev %s mora biti številka!"
#: any.pm:620
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""
#: any.pm:625
#, c-format
msgid "Add user"
msgstr "Dodajanje uporabnika"
#: any.pm:626
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Vnesite uporabnika\n"
"%s"
#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4853
#: standalone/drakbackup:2703 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Končano"
#: any.pm:630 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Sprejmi uporabnika"
#: any.pm:641
#, c-format
msgid "Real name"
msgstr "Pravo ime"
#: any.pm:642 standalone/drakbackup:1622
#, c-format
msgid "Login name"
msgstr "Ime za prijavo"
#: any.pm:645
#, c-format
msgid "Shell"
msgstr "Lupina"
#: any.pm:649
#, c-format
msgid "Icon"
msgstr "Ikona"
#: any.pm:696 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Samodejna prijava"
#: any.pm:697
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Računalnik lahko samodejno prijavi enega uporabnika."
#: any.pm:698
#, fuzzy, c-format
msgid "Use this feature"
msgstr "Želite uporabiti to možnost?"
#: any.pm:699
#, c-format
msgid "Choose the default user:"
msgstr "Izberite privzetega uporabnika:"
#: any.pm:700
#, c-format
msgid "Choose the window manager to run:"
msgstr "Izberite okenskega upravitelja, ki naj se zažene:"
#: any.pm:712 any.pm:779
#, c-format
msgid "Please choose a language to use."
msgstr "Prosim, izberite jezik."
#: any.pm:713 any.pm:780
#, c-format
msgid "Language choice"
msgstr "Izbira jezika"
#: any.pm:740
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux omogoča večjezično podporo. Izberite\n"
"jezike, ki jih želite namestiti. Nameščeni jeziki bodo dosegljivi,\n"
"ko boste dokončali namestitev in znova zagnali računalnik."
#: any.pm:759 any.pm:788 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Kot privzeto kodiranje uporabi Unicode"
#: any.pm:760 help.pm:647
#, c-format
msgid "All languages"
msgstr "Vsi jeziki"
#: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952
#, c-format
msgid "Country / Region"
msgstr "Država"
#: any.pm:836
#, c-format
msgid "Please choose your country."
msgstr "Izberite državo:"
#: any.pm:838
#, c-format
msgid "Here is the full list of available countries"
msgstr "Izbirate lahko med naslednjimi državami:"
#: any.pm:839
#, c-format
msgid "Other Countries"
msgstr "Druge države"
#: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:393
#, c-format
msgid "Advanced"
msgstr "Napredno"
#: any.pm:847
#, c-format
msgid "Input method:"
msgstr "Način vnosa:"
#: any.pm:848 install_any.pm:421 network/netconnect.pm:154
#: network/netconnect.pm:314 network/netconnect.pm:319
#: network/netconnect.pm:1177 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "Ne"
#: any.pm:963
#, c-format
msgid "No sharing"
msgstr "Brez skupne rabe"
#: any.pm:963
#, c-format
msgid "Allow all users"
msgstr "Dovoli vsem uporabnikom"
#: any.pm:967
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr "Želite uporabnikom omogočiti, da dajo svoje mape v skupno rabo?\n"
#: any.pm:979
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS je tradicionalni UNIXov sistem za datoteke v skupni rabi, z manj podpore "
"na Macih in Windowsih."
#: any.pm:982
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB je sistem za datoteke v skupni rabi, ki ga uporabljajo Windowsi, Mac OS "
"X in mnogi moderni sistemi Linux."
#: any.pm:990
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Za datoteke v skupni rabi lahko uporabljate sistema NFS in SMB. Prosim "
"izberite, katerega želite uporabiti."
#: any.pm:1015
#, c-format
msgid "Launch userdrake"
msgstr "Zaženi upravitelja uporabnikov."
#: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5162 standalone/drakTermServ:295
#: standalone/drakbackup:4083 standalone/drakbug:126 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:118
#: standalone/printerdrake:548
#, c-format
msgid "Close"
msgstr "Zapri"
#: any.pm:1017
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Skupno rabo datotek uporablja skupina \"fileshare\". \n"
"Tej skupini lahko dodate uporabnika s pomočjo upravitelja uporabnikov."
#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Krajevna datoteka"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP (Lightweight Directory Access Protocol)"
#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS (Network Information Service)\t"
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Pametna kartica (Smart Card)"
#: authentication.pm:27 authentication.pm:152
#, c-format
msgid "Windows Domain"
msgstr "Domena za Okna (Windows)"
#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Aktivni imenik, ki vsebuje SFU (Windows services for Unix)"
#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Aktivni imenik, ki vsebuje Winbind"
#: authentication.pm:55
#, c-format
msgid "Local file:"
msgstr "Krajevna datoteka:"
#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"Uporabi krajevno za vsa overjanja in podatke, ki jih uporabniki navedejo v "
"krajevni datoteki."
#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"Določi, naj računalnik za vsa ali za nekatera LDAP overjanja utrdi določene "
"vrste podatkov znotraj vaše organizacije."
#: authentication.pm:57
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"Dovoli zagon skupine računalnikov znotraj iste NIS domene z enotnim geslom "
"in skupno datoteko."
#: authentication.pm:58
#, c-format
msgid "Windows Domain:"
msgstr "Domena za Okna (Windows):"
#: authentication.pm:58
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"Winbind sistemu dovoli, da pridobi podatke in preveri uporabnike v domeni za "
"Okna."
#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr "Aktivni imenik, ki vsebuje SFU (Windows services for Unix)"
#: authentication.pm:59 authentication.pm:60
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
"Kerberos je varen sistem za zagotavljanje omrežnih storitev za overjanje"
#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Aktivni imenik, ki vsebuje Winbind"
#: authentication.pm:85
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP overjanje"
#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr "Osnovno domensko ime LDAP"
#: authentication.pm:87 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "Strežnik LDAP"
#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "preprosto"
#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS (Transport Layer Security protocol)"
#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL ( Secure Sockets Layer.)"
#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "Varnostne nastavitve (SASL/Kerberos)"
#: authentication.pm:110 authentication.pm:148
#, c-format
msgid "Authentication Active Directory"
msgstr "Aktivni imenik za overjanje"
#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180
#, c-format
msgid "Domain"
msgstr "Domena"
#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:270
#, c-format
msgid "Server"
msgstr "Strežnik"
#: authentication.pm:114
#, c-format
msgid "LDAP users database"
msgstr "Zbirka podatkov o uporabnikih LDAP"
#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr "Uporabi anonimno prijavo BIND (Berkeley Internet Name Domain)"
#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "Uporabnik LDAP, ki ima dovoljenje za brskanje po aktivnem imeniku"
#: authentication.pm:117
#, c-format
msgid "Password for user"
msgstr "Uporabniško geslo"
#: authentication.pm:118
#, c-format
msgid "Encryption"
msgstr "Šifriranje"
#: authentication.pm:129
#, c-format
msgid "Authentication NIS"
msgstr "Overjanje NIS"
#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "Domena NIS "
#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "Strežnik NIS"
#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Da bi to delovalo z Win2000 Primary Domain Controller - (PDC), boste "
"verjetno morali kot administrator zagnati: C:\\>net localgroup \"Pre-Windows "
"2000 Compatible Access\" everyone in ponovno zagnati strežnik.\n"
"Da bi lahko dodali računalnik domeni za Okna, boste potrebovali tudi "
"uporabniško ime in geslo Administratorja Domene.\n"
"Če omrežna povezava še ni vzpostavljena, se bo Drakx poskusil povezati z "
"domeno po naslednjem koraku nastavitev.\n"
"Če bi nastavljanje overjanja spodletelo, po ponovnem zagonu zaženite "
"'smbpasswd -j DOMAIN -U USER%%PASSWORD' z vašo domeno za Okna in ob uporabi "
"administratorjevega uporabniškega imena in gesla.\n"
"Z ukazom 'wbinfo -t' lahko preizkusite, če so vaše nastavitve overjanja v "
"redu."
#: authentication.pm:148
#, c-format
msgid "Authentication Windows Domain"
msgstr "Overjanje domene za Okna (Windows)"
#: authentication.pm:153
#, c-format
msgid "Domain Admin User Name"
msgstr "Uporabniško ime skrbnika domene"
#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr "Geslo skrbnika domene"
#: authentication.pm:155
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr "Za shranjevanje UID/SID uporabi Idmap"
#: authentication.pm:156
#, c-format
msgid "Default Idmap "
msgstr "Privzeta Idmap"
#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr "Nastavitev gesla uporabnika root in načina omrežnega overjanja"
#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password"
msgstr "Nastavitev gesla uporabnika root"
#: authentication.pm:172 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Način overjanja"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "Brez gesla"
#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Geslo je prekratko (imeti mora najmanj %d znakov)."
#: authentication.pm:188 network/netconnect.pm:319 network/netconnect.pm:574
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Overjanje"
#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Brez domene NIS oddajanje ni mogoče."
# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:753
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Pozdravljeni!\n"
"\n"
"Lahko izbirate med operacijski sistemi s seznama.\n"
"Po desetih sekundah bo stekel zagon privzetega sistema.\n"
"\n"
#: bootloader.pm:853
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO v grafičnem načinu"
#: bootloader.pm:854
#, c-format
msgid "LILO with text menu"
msgstr "LILO v besedilnem načinu."
#: bootloader.pm:855
#, c-format
msgid "GRUB with graphical menu"
msgstr ""
#: bootloader.pm:856
#, c-format
msgid "GRUB with text menu"
msgstr ""
#: bootloader.pm:857
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:935
#, c-format
msgid "not enough room in /boot"
msgstr "V /boot ni dovolj prostora."
#: bootloader.pm:1414
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Zagonskega nalagalnika ni mogoče namestiti na razdelek %s.\n"
#: bootloader.pm:1448
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"Nastavitve zagonskega nalagalnika je potrebno posodobiti zaradi "
"preštevilčenja razdelkov."
#: bootloader.pm:1461
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Zagonskega nalagalnika ni mogoče namestiti pravilno. Izvesti morate zagon za "
"reševanje sistema in izbrati \"%s\"."
#: bootloader.pm:1462
#, c-format
msgid "Re-install Boot Loader"
msgstr "Ponovno namesti zagonski nalagalnik."
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d minut"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 minuta"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d sekund"
#: common.pm:253
#, c-format
msgid "kdesu missing"
msgstr "manjka kdesu"
#: common.pm:256
#, c-format
msgid "consolehelper missing"
msgstr "manjka consolehelper"
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Avstrija"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Avstralija"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Belgija"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brazilija"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Kanada"
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Švica"
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Kostarika"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Češka"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Nemčija"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Danska"
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estonija"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Španija"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Finska"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Francija"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grčija"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Madžarska"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Irska"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Izrael"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Italija"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Japonska"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Nizozemska"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Norveška"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Nova Zelandija"
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Poljska"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugalska"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Rusija"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Švedska"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Slovaška"
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Tajska"
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Tajvan"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Južna Afrika"
#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Združene države Amerike"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"S pomočjo protokola WebDAV lahko mapo z omrežnega strežnika priklopite "
"lokalno\n"
"in jo obravnavate kot lokalno mapo (v primeru, da je mrežni strežnik "
"nastavljen kot WebDAV strežnik\n"
"Če želite dodati WebDAV priklopne točke, izberite \"Novo\"."
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Novo"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Odklopi"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Priklopi"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Priklopna točka"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Vnesite URL naslov WebDAV strežnika"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "Url naslov se mora pričeti s http:// ali s https://"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Strežnik:"
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1266
#, c-format
msgid "Mount point: "
msgstr "Priklopna točka: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1273
#, c-format
msgid "Options: %s"
msgstr "Možnosti: %s"
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Najprej naredite varnostno kopijo podatkov"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Če nameravate uporabiti aboot, pustite dovolj prostega prostora (2048 "
"sektorjev zadošča)\n"
"na začetku diska."
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Čarovnik"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Izberite dejanje"
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Imate en velik razdelek FAT (Navadno ga uporabljajo Okna (Windows/DOS))\n"
"Predlagam, da najprej spremenite velikost tega razdelka\n"
"(kliknite nanj, nato pa na \"Spremeni velikost\")"
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Kliknite na razdelek"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr "Podrobnosti"
#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Ne najdem trdega diska"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Okna (Windows)"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1203
#, c-format
msgid "Empty"
msgstr "Prazno"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Vrste datotečnih sistemov:"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Rajši uporabite ``%s''"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "Ustvari"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Vrsta"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:236
#, c-format
msgid "Delete"
msgstr "Izbriši"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Najprej uporabite ``Odklopi''"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Izberite drug razdelek"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Izberite razdelek"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Izhod"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Razveljavi"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Spremeni v normalni način"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Spremeni v napredni način"
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Vseeno nadaljujem?"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Zapri brez shranjevanja sprememb"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Zapri brez zapisovanja razdelitvene tabele?"
#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Želite shraniti spremembe v /etc/fstab?"
#: diskdrake/interactive.pm:292 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr ""
"Da bi uveljavili spremembe razdelitvene tabele, morate ponovno zagnati "
"računalnik."
#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Razdelek %s bi morali formatirati.\n"
"Drugače vnos za priklopno točko %s ne bo vpisan v fstab.\n"
"Vseeno končam?"
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Izbriši vse"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Samodejno dodeljevanje"
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:121
#, c-format
msgid "More"
msgstr "Več"
#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Informacije o trdem disku"
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Vsi primarni razdelki so že zasedeni"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Dodajanje novih razdelkov ni mogoče"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Če želite imeti več razdelkov, morate enega izbrisati, tako da bo možno "
"ustvariti razširjen razdelek"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr "Brez supermount"
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr "Supermount"
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "Supermount, razen za pogone CDROM"
#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Shrani razdelitveno tabelo"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Obnovi razdelitveno tabelo"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Reševanje razdelitvene tabele"
#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Ponovno naloži razdelitveno tabelo"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Samodejni priklop odstranljivih medijev"
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Izberite datoteko"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Varnostna kopija zagonske tabele nima enake velikosti\n"
"Vseeno nadaljujem?"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Reševanje razdelitvene tabele"
#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Podrobne informacije"
#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "Spremeni velikost"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "Formatiraj"
#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "Dodaj k RAID"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "Dodaj k LVM"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "Odstrani iz RAID"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "Odstrani iz LVM"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "Spremeni RAID"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "Uporabi za povratno zanko (loopback)"
#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "Ustvarjanje novega razdelka"
#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "Začetni sektor: "
#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:926
#, c-format
msgid "Size in MB: "
msgstr "Velikost v MB: "
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:927
#, c-format
msgid "Filesystem type: "
msgstr "Vrsta datotečnega sistema: "
#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "Lastnosti:"
#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "Ime logičnega pogona"
#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Ne morete ustvariti novega razdelka\n"
"(imate največje dopustno število primarnih razdelkov)\n"
"Najprej odstranite en primarni razdelek in ustvarite podaljšan razdelek."
#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "Izbrišem datoteko loopback?"
#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Po spremembi tipa razdelka %s, bodo vsi podatki na tem razdelku izgubljeni"
#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "Spremeni vrsto razdelka"
#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Kateri datotečni sistem želite?"
#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Preklapljam z ext2 na ext3"
#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Kam želite priklopiti loopback datoteko %s?"
#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Kam želite priklopiti napravo %s?"
#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Ne morem odstraniti priklopne točke, ker ta razdelek uporablja loopback.\n"
"Najprej odstranite loopback"
#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Kam želite priklopiti napravo %s?"
#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Spreminjanje velikosti"
#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Računanje mej FAT datotečnega sistema"
#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "Temu razdelku ni mogoče spremeniti velikosti"
#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Svetujem, da napravite varnostno kopijo podatkov s tega razdelka"
#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr ""
"Po spremembi velikosti razdelka %s bodo vsi podatki na tem razdelku "
"izgubljeni"
#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "Izberite novo velikost"
#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "Nova velikost v MB: "
#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Ko boste naslednjič zagnali Okna (Windows),\n"
" se bo zagnal program za preverjanje datotečnega sistema."
#: diskdrake/interactive.pm:840
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Izberite obstoječ RAID za dodajanje"
#: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859
#, c-format
msgid "new"
msgstr "nov"
#: diskdrake/interactive.pm:857
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Izberite obstoječ LVM za dodajanje"
#: diskdrake/interactive.pm:863
#, c-format
msgid "LVM name?"
msgstr "Ime LVM?"
#: diskdrake/interactive.pm:891
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""
#: diskdrake/interactive.pm:893
#, c-format
msgid "Moving physical extents"
msgstr ""
#: diskdrake/interactive.pm:911
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Tega razdelka ne morete uporabiti za povratno zanko (loopback)."
#: diskdrake/interactive.pm:924
#, c-format
msgid "Loopback"
msgstr "Povratna zanka (loopback)"
#: diskdrake/interactive.pm:925
#, c-format
msgid "Loopback file name: "
msgstr "Ime loopback datoteke: "
#: diskdrake/interactive.pm:930
#, c-format
msgid "Give a file name"
msgstr "Vnesite ime datoteke"
#: diskdrake/interactive.pm:933
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr ""
"To datoteko že uporablja druga povratna zanka (looback), izberite drugo."
#: diskdrake/interactive.pm:934
#, c-format
msgid "File already exists. Use it?"
msgstr "Datoteka že obstaja. Jo uporabim?"
#: diskdrake/interactive.pm:957
#, c-format
msgid "Mount options"
msgstr "Možnosti priklopa"
#: diskdrake/interactive.pm:964
#, c-format
msgid "Various"
msgstr "Dodatne možnosti"
#: diskdrake/interactive.pm:1028
#, c-format
msgid "device"
msgstr "naprava"
#: diskdrake/interactive.pm:1029
#, c-format
msgid "level"
msgstr "raven"
#: diskdrake/interactive.pm:1030
#, c-format
msgid "chunk size in KiB"
msgstr "velikost dela v KiB"
#: diskdrake/interactive.pm:1047
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "Bodite previdni: Ta operacija je nevarna."
#: diskdrake/interactive.pm:1062
#, c-format
msgid "What type of partitioning?"
msgstr "Vrsta razdelitve?"
#: diskdrake/interactive.pm:1100
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Da bi uveljavili spremembe, morate ponovno zagnati računalnik."
#: diskdrake/interactive.pm:1109
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Razdelitvena tabela pogona %s bo zapisana na disk!"
#: diskdrake/interactive.pm:1118
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"Po formatiranju razdelka %s bodo vsi podatki na tem razdelku izgubljeni."
#: diskdrake/interactive.pm:1134
#, c-format
msgid "Move files to the new partition"
msgstr "Premakni datoteke na novi razdelek"
#: diskdrake/interactive.pm:1134
#, c-format
msgid "Hide files"
msgstr "Skrij datoteke"
#: diskdrake/interactive.pm:1135
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Mapa %s ni prazna\n"
"(%s)"
#: diskdrake/interactive.pm:1146
#, c-format
msgid "Moving files to the new partition"
msgstr "Premikanje podatkov na novi razdelek"
#: diskdrake/interactive.pm:1150
#, c-format
msgid "Copying %s"
msgstr "Kopiranje %s"
#: diskdrake/interactive.pm:1154
#, c-format
msgid "Removing %s"
msgstr "Odstranjevanje %s"
#: diskdrake/interactive.pm:1168
#, c-format
msgid "partition %s is now known as %s"
msgstr "Razdelek %s ima novo oznako %s"
#: diskdrake/interactive.pm:1169
#, c-format
msgid "Partitions have been renumbered: "
msgstr "Razdelki so bili preštevilčeni"
#: diskdrake/interactive.pm:1189 diskdrake/interactive.pm:1251
#, c-format
msgid "Device: "
msgstr "Naprava:"
#: diskdrake/interactive.pm:1190
#, c-format
msgid "Devfs name: "
msgstr "Ime devfs: "
#: diskdrake/interactive.pm:1191
#, c-format
msgid "Volume label: "
msgstr "Oznaka enote: "
#: diskdrake/interactive.pm:1192
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Črka DOS pogona: %s (ugibanje)\n"
#: diskdrake/interactive.pm:1196 diskdrake/interactive.pm:1205
#: diskdrake/interactive.pm:1269
#, c-format
msgid "Type: "
msgstr "Vrsta:"
#: diskdrake/interactive.pm:1200 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "Ime:"
#: diskdrake/interactive.pm:1207
#, c-format
msgid "Start: sector %s\n"
msgstr "Začetni sektor %s\n"
#: diskdrake/interactive.pm:1208
#, c-format
msgid "Size: %s"
msgstr "Velikost: %s"
#: diskdrake/interactive.pm:1210
#, c-format
msgid ", %s sectors"
msgstr ", %s sektorjev"
#: diskdrake/interactive.pm:1212
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Cilinder %d do %d\n"
#: diskdrake/interactive.pm:1213
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1214
#, c-format
msgid "Formatted\n"
msgstr "Formatirano\n"
#: diskdrake/interactive.pm:1215
#, c-format
msgid "Not formatted\n"
msgstr "Neformatirano\n"
#: diskdrake/interactive.pm:1216
#, c-format
msgid "Mounted\n"
msgstr "Priklopljeno\n"
#: diskdrake/interactive.pm:1217
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1222
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr "Datoteka(e) loopback: %s\n"
#: diskdrake/interactive.pm:1223
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Privzeti zagonski razdelek\n"
" (za zagon MS-DOS, ne za lilo)\n"
#: diskdrake/interactive.pm:1225
#, c-format
msgid "Level %s\n"
msgstr "Raven %s\n"
#: diskdrake/interactive.pm:1226
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "Velikost dela %d KiB\n"
#: diskdrake/interactive.pm:1227
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-diski %s\n"
#: diskdrake/interactive.pm:1229
#, c-format
msgid "Loopback file name: %s"
msgstr "Ime loopback datoteke: %s"
#: diskdrake/interactive.pm:1232
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Lahko, da je to razdelek\n"
"z gonilniki. Najbolje bo,\n"
"da ga ne spreminjate.\n"
#: diskdrake/interactive.pm:1235
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"To je razdelek za začetno nalaganje\n"
"in se uporablja za dvojni zagon.\n"
#: diskdrake/interactive.pm:1252
#, c-format
msgid "Read-only"
msgstr "Samo za branje"
#: diskdrake/interactive.pm:1253
#, c-format
msgid "Size: %s\n"
msgstr "Velikost: %s\n"
#: diskdrake/interactive.pm:1254
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Geometrija: %s cilindrov, %s glav, %s sektorjev\n"
#: diskdrake/interactive.pm:1255
#, c-format
msgid "Info: "
msgstr "Informacije: "
#: diskdrake/interactive.pm:1256
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-diski %s\n"
#: diskdrake/interactive.pm:1257
#, c-format
msgid "Partition table type: %s\n"
msgstr "Vrsta razdelitvene tabele: %s\n"
#: diskdrake/interactive.pm:1258
#, c-format
msgid "on channel %d id %d\n"
msgstr "na kanalu %d id %d\n"
#: diskdrake/interactive.pm:1301
#, c-format
msgid "Filesystem encryption key"
msgstr "Šifrirni ključ datotečnega sistema: "
#: diskdrake/interactive.pm:1302
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Izberite šifrirni ključ datotečnega sistema"
#: diskdrake/interactive.pm:1305
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Šifrirni ključ datotečnega sistema je preveč preprost.(vsebovati mora vsaj %"
"d znakov)"
#: diskdrake/interactive.pm:1306
#, c-format
msgid "The encryption keys do not match"
msgstr "Šifrirna ključa se ne ujemata"
#: diskdrake/interactive.pm:1309 network/netconnect.pm:1022
#: standalone/drakconnect:419
#, c-format
msgid "Encryption key"
msgstr "Šifrirni ključ"
#: diskdrake/interactive.pm:1310
#, c-format
msgid "Encryption key (again)"
msgstr "Šifrirni ključ (ponovno)"
#: diskdrake/interactive.pm:1311 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "Algoritem za šifriranje"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Spremeni vrsto"
#: diskdrake/smbnfs_gtk.pm:162
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "Z uporabniškim imenom %s se ni mogoče prijaviti (napačno geslo?)"
#: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175
#, c-format
msgid "Domain Authentication Required"
msgstr "Potrebno je preverjanje domene."
#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Which username"
msgstr "Katero uporabniško ime?"
#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Another one"
msgstr "Drugo"
#: diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Prosim vpišite vaše uporabniško ime, geslo in domeno za dostop do gostitelja."
#: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "Uporabniško ime"
#: diskdrake/smbnfs_gtk.pm:204
#, c-format
msgid "Search servers"
msgstr "Iskanje strežnikov"
#: diskdrake/smbnfs_gtk.pm:209
#, c-format
msgid "Search new servers"
msgstr "Iskanje novih strežnikov"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Potrebno je namestiti paket %s. Naj ga namestim?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Manjka nepogrešljivi paket %s."
#: do_pkgs.pm:182
#, c-format
msgid "Installing packages..."
msgstr "Nameščanje paketov ..."
#: do_pkgs.pm:227
#, c-format
msgid "Removing packages..."
msgstr "Odstranjevanje paketov ..."
#: fs/format.pm:57 fs/format.pm:64
#, c-format
msgid "Formatting partition %s"
msgstr "Formatiranje razdelka %s"
#: fs/format.pm:61
#, c-format
msgid "Creating and formatting file %s"
msgstr "Ustvarjanje in formatiranje datoteke %s"
#: fs/format.pm:114
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "Ne morem formatirati %s z vrsto %s. "
#: fs/format.pm:119 fs/format.pm:121
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s formatiranje %s ni uspelo"
#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Krožni priklopi %s\n"
#: fs/mount.pm:72
#, c-format
msgid "Mounting partition %s"
msgstr "Priklapljanje razdelka %s"
#: fs/mount.pm:73
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "Priklapljanje razdelka %s v imenik %s ni uspelo. "
#: fs/mount.pm:78 fs/mount.pm:95
#, c-format
msgid "Checking %s"
msgstr "Preverjanje %s"
#: fs/mount.pm:111 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "napaka pri odklapljanju %s: %s"
#: fs/mount.pm:140
#, c-format
msgid "Enabling swap partition %s"
msgstr "Omogočanje izmenjalnega razdelka (swap) %s"
#: fs/mount_options.pm:111
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:113
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"Na tem datotečnem sistemu ne spreminjajte časa dostopanja do podatkovne "
"strukture (inode).\n"
"(n.pr. za hitrejši dostop do novičarskih strežnikov)."
#: fs/mount_options.pm:116
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"Priklop mogoč samo na izrecno zahtevo\n"
"(možnost -a ne bo povzročila priklopa tega datototečnega sistema)."
#: fs/mount_options.pm:119
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
"Ne tolmači posebnih znakovnih ali blokovnih naprav v datotečnem sistemu."
#: fs/mount_options.pm:121
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"Ne dovoli zagona izvedljivih programov na priklopljenem datotečnem\n"
" sistemu. Ta nastavitev je koristna pri strežnikih z datotečnimi sistemi,\n"
" ki vsebujejo izvedljive programe za datotečne sisteme z drugačno "
"arhitekturo od njihove."
#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"Ne dovoli, da bita set-user-identifier in set-group-identifier delujeta.\n"
"(To se zdi varno, a je pravzaprav nevarno, če imate nameščen\n"
"suidperl(1).)"
#: fs/mount_options.pm:129
#, c-format
msgid "Mount the file system read-only."
msgstr "Datotečni sistem priklopi samo za branje."
#: fs/mount_options.pm:131
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
"Vsa priklapljanja in odklapljanja na datotečni sistem morajobiti izvedena "
"istočasno."
#: fs/mount_options.pm:135
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"Dovoli priklop sistema navadnemu uporabniku\n"
"Njegovo ime bo dodano v datoteko \"mtab\", tako da bo lahko datotečni sistem "
"tudi odklopil.\n"
"Ta nastavitev samodejno omogoči tudi možnosti noexec,\n"
" nosuid in nodev."
#: fs/mount_options.pm:141
#, c-format
msgid ""
"Enable user disk quota accounting enabled, and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:143
#, c-format
msgid "Give write access to ordinary users"
msgstr "Dovoli zapisovanje navadnim uporabnikom"
#: fs/mount_options.pm:145
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "Dovoli navadnim uporabnikom dostop samo za branje"
#: fs/type.pm:375
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "JFS ne morete uporabiti na razdelkih, manjših od 16MB"
#: fs/type.pm:376
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "ReiserFS ne morete uporabiti na razdelkih, manjših od 32MB"
#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "z /usr"
#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "strežnik"
#: fsedit.pm:210
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Razdelitvene tabele naprave %s ne morem prebrati, ker ima preveč napak.\n"
"Lahko poskusim nadaljevati in izbrišem slabe razdelke. (VSI PODATKI BODO "
"IZGUBLJENI!)\n"
"Druga možnost je, da orodju DrakX ne dovolite spreminjanja razdelitvene "
"tabele.\n"
"(Napaka je %s)\n"
"Soglašate z izgubo vseh razdelkov?\n"
#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Priklopne točke se morajo začeti z /"
#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Priklopne točke smejo vsebovati samo alfanumerične znake."
#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Razdelek s priklopno točko %s že obstaja.\n"
#: fsedit.pm:385
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Za korenski (/) razdelek ste izbrali programski razdelek RAID.\n"
"Nobeden zagonski nalagalnik ne bo deloval brez /boot razdelka.\n"
"Ne pozabite dodati /boot razdelka"
#: fsedit.pm:390
#, c-format
msgid ""
"You can not use a LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr ""
#: fsedit.pm:392
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Ta imenik bi moral ostati v okviru korenskega datotečnega sistema."
#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Za to priklopno točko potrebujete pravi datotečni sistem (ext2/ext3, "
"reiserfs, xfs, ali jfs)\n"
#: fsedit.pm:404
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr ""
"Za priklopno točko %s ni mogoče uporabiti šifriranega datotečnega sistema."
#: fsedit.pm:465
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Za samodejno razdeljevanje ni dovolj prostora."
#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr "Napraviti ni mogoče ničesar."
#: harddrake/data.pm:62 install_any.pm:1665
#, c-format
msgid "Floppy"
msgstr "Disketna enota"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:88 install_any.pm:1666
#, c-format
msgid "Hard Disk"
msgstr "Hard Disk"
#: harddrake/data.pm:97 install_any.pm:1667
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD zapisovalniki"
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:127 standalone/drakbackup:2036
#, c-format
msgid "Tape"
msgstr "Tračna enota"
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Grafična kartica"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "TV kartica"
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Druge naprave za grafiko, video in zvok"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Zvočna kartica"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Spletna kamera"
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Procesne enote"
#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN modemi"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Mrežna kartica"
#: harddrake/data.pm:282 network/netconnect.pm:488
#, c-format
msgid "Modem"
msgstr "Modem"
#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "ADSL modemi"
#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Pomnilnik"
#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "krmilniki AGP"
#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:984
#, c-format
msgid "Printer"
msgstr "Tiskalnik"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Igralna palica"
#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "krmilniki SATA"
#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "krmilniki RAID"
#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "krmilniki IDE/ATA"
#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "krmilniki Firewire"
#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "krmilniki PCMCIA"
#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "krmilniki SCSI"
#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "krmilniki USB"
#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "vrata USB"
#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "krmilniki SMBus"
#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "Sistemski mostički in krmilniki"
#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117
#: install_steps_interactive.pm:944 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Tipkovnica"
#: harddrake/data.pm:460
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977
#, c-format
msgid "Mouse"
msgstr "Miška"
#: harddrake/data.pm:483
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:492
#, c-format
msgid "Scanner"
msgstr "Optični čitalnik"
#: harddrake/data.pm:502 standalone/harddrake2:442
#, c-format
msgid "Unknown/Others"
msgstr "Neznane naprave"
#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr "Centralna procesna enota # "
#: harddrake/sound.pm:190 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Prosim počakajte... Uveljavljanje nastavitev"
#: harddrake/sound.pm:226
#, c-format
msgid "No alternative driver"
msgstr "Ne najdem nadomestnega gonilnika"
#: harddrake/sound.pm:227
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Ne najdem OSS/ALSA nadomestnega gonilnika za zvočno kartico (%s), ki "
"trenutno uporablja\"%s\" "
#: harddrake/sound.pm:233
#, c-format
msgid "Sound configuration"
msgstr "Nastavitve zvoka"
#: harddrake/sound.pm:235
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Izbirate lahko med naštetimi nadomestnimi gonilniki (OSS ali ALSA) za vašo "
"zvočno kartico (%s)."
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:240
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Vaša kartica trenutno uporablja gonilnik %s\"%s\" (privzeti gonilnik za vašo "
"kartico je \"%s\")"
#: harddrake/sound.pm:242
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Odprt Zvočni Sistem) je bil prvi API (vmesnik za aplikacijsko "
"programiranje) za zvok. Je od operacijskega sistema neodvisen API za zvok."
"(Najdemo ga na večini UNIX(tm) sistemov, vendar je zelo enostaven in omejen "
"API.)\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) je napredna arhitektura zvoka, ki\n"
"podpira večino ISA, USB in PCI zvočnih katric in\n"
"\n"
"zagotavlja boljši API kot OSS.\n"
"\n"
"ALSA lahko uporabljamo:\n"
"-s starim OSS API\n"
"-z novim ALSA API, ki vsebuje mnoge izboljšave, vendar zahteva uporabo ALSA "
"knjižnice.\n"
#: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Gonilnik:"
#: harddrake/sound.pm:261
#, c-format
msgid "Trouble shooting"
msgstr "Odpravljanje napak"
#: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078
#: network/ndiswrapper.pm:95 network/netconnect.pm:467
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310
#: standalone/drakTermServ:326 standalone/drakTermServ:1169
#: standalone/drakTermServ:1230 standalone/drakTermServ:1895
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:969 standalone/drakups:27
#: standalone/harddrake2:480 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Opozorilo"
#: harddrake/sound.pm:269
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"Stari \"%s\" gonilnik je na črni listi,\n"
"\n"
"ker povzroči napako ob razbremenitvi jedra.\n"
"\n"
"Novi \"%s\" gonilnik bo uporabljen ob ponovnem zagonu."
#: harddrake/sound.pm:277
#, c-format
msgid "No open source driver"
msgstr "Ni odprtokodnega gonilnika."
#: harddrake/sound.pm:278
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Ne najdem prostega gonilnika za to zvočo kartico (%s), lastniški gonilnik pa "
"je dostopen na \"%s\"."
#: harddrake/sound.pm:281
#, c-format
msgid "No known driver"
msgstr "Ni znanega gonilnika"
#: harddrake/sound.pm:282
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Za to zvočno kartico ni znanega gonilnika (%s)"
#: harddrake/sound.pm:286
#, c-format
msgid "Unknown driver"
msgstr "Neznan gonilnik"
#: harddrake/sound.pm:287
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Napaka: Gonilnika \"%s\" za vašo zvočno katico ni na seznamu."
#: harddrake/sound.pm:301
#, c-format
msgid "Sound trouble shooting"
msgstr "Odpravljanje napak pri zvoku"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:304
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Orodje za preizkus zvoka izvede naslednje ukaze:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" pove, kateri je privzeti gonilnik za vašo "
"zvočno kartico\n"
"- \"grep sound-slot /etc/modules.conf\" pove, kateri gonilnik je\n"
"trenutno v uporabi\n"
"\n"
"- \"/sbin/lsmod\" preveri, ali je modul (gonilnik) za vašo kartico naložen\n"
"\n"
"- \"/sbin/chkconfig --list sound\" in \"/sbin/chkconfig --list alsa\" "
"povesta\n"
"ali sta storitvi za zvok in ALSA nastavljeni tako, da delujeta v delovnem\n"
"nivoju init 3\n"
"\n"
"- \"aumix -q\" pove, ali je jakost zvoka nastavljena na \"nemo\"ali ne\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" pove, kateri program uporablja zvočna "
"kartica.\n"
#: harddrake/sound.pm:330
#, c-format
msgid "Let me pick any driver"
msgstr "Dovolite, da izberem katerikoli gonilnik"
#: harddrake/sound.pm:333
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Izbiram poljuben gonilnik"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:336
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Če ste prepričani, da veste, kateri gonilnik je pravi za vašo zvočno "
"kartico,\n"
"ga izberite iz spodnjega seznama:\n"
"\n"
"Trenutno vaša zvočna kartica \"%s\" uporablja gonilnik \"%s\" "
#: harddrake/v4l.pm:12 standalone/net_applet:63 standalone/net_applet:64
#: standalone/net_applet:66
#, c-format
msgid "Auto-detect"
msgstr "Samodejna zanava"
#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Neznano|Generic"
#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Neznano|CPH05X (bt878) [različni proizvajalci]"
#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Neznano|CPH06X (bt878) [različni proizvajalci]"
#: harddrake/v4l.pm:392
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"Za velik odstotek modem TV kartic,modul jedra bttv GNU/Linuxa samodejno "
"zazna prave nastavitve.\n"
"Če vaša kartica ni pravilno nastavljena, lahko spremenite kartico tukaj. "
"Samo izberite nastavitve vaše tv kartice."
#: harddrake/v4l.pm:395
#, c-format
msgid "Card model:"
msgstr "Model kartice:"
#: harddrake/v4l.pm:396
#, c-format
msgid "Tuner type:"
msgstr "Tip tv kartice:"
#: harddrake/v4l.pm:397
#, c-format
msgid "Number of capture buffers:"
msgstr "Število capture medpomnilnikov:"
#: harddrake/v4l.pm:397
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "število capture medpomnilnikov za mmap'ed capture"
#: harddrake/v4l.pm:399
#, c-format
msgid "PLL setting:"
msgstr "nastavitve PLL:"
#: harddrake/v4l.pm:400
#, c-format
msgid "Radio support:"
msgstr "Radio podpora:"
#: harddrake/v4l.pm:400
#, c-format
msgid "enable radio support"
msgstr "omogoči radio podporo"
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Preden nadaljujete, pozorno preberite pogoje licenčne pogodbe,\n"
"ki se nanaša na celotno distribucijo Mandriva Linux. Če se strinjate z "
"vsemi\n"
"pogoji licenčne pogodbe, označite okence \"%s\". Če se s pogoji pogodbe\n"
"ne strinjate, pa označite okence \"%s\" in vaš računalnik se bo ponovno "
"zagnal."
#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Sprejmem"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux je večuporabniški sistem, kar pomeni, da ima lahko vsak\n"
"uporabnik svoje nastavitve, svoje datoteke itd. Več o tem si lahko\n"
" preberete v dokumentaciji. Razen sistemskega, \"root\" upravitelja,\n"
"uporabniki, ki jih boste dodali, ne bodo imeli dovoljenj, ki so potrebna za\n"
"spreminjanje tistih datotek in nastavitev, ki vplivajo na celoten sistem.\n"
"Tako je sistem zaščiten pred nenamernimi ali zlonamernimi spremembami.\n"
"Dodati morate vsaj enega navadnega uporabnika. Tako boste ustvarili\n"
"svoj uporabniški račun, ki ga boste uporabljali za vsakdanje delo z\n"
"računalnikom. Čeprav se je v sistem kot sistemski upravitelj zelo lahko\n"
"prijaviti, vam to odsvetujemo, saj že najmanjša napaka lahko povzroči, da\n"
"sistem preneha delovati. Če pa napravite resno napako kot navaden "
"uporabnik,\n"
"je najhuje, kar se vam lahko zgodi, da izbrišete kakšne podatke,\n"
"ne morete pa vplivati na celoten sistem.\n"
"\n"
"V prvo vnosno polje lahko, če to želite, vpišete svoje pravo ime.\n"
"Vpis pravega imena seveda ni obvezen; lahko vpišete poljubno ime.\n"
"Prvo besedo, ki jo boste vpisali, bo program DrakX uporabil kot uporabniško "
"ime\n"
"in jo prepisal v polje \"%s\" kot ime, s katerim se boste prijavljali\n"
"v sistem. Če želite, lahko uporabniško ime spremenite. V naslednje polje "
"vnesite\n"
"geslo. S stališča varnosti geslo navadnega uporabnika ni tako pomembno, kot "
"geslo\n"
"upravitelja sistema, zato to polje lahko pustite prazno. Vendar vam "
"priporočamo,\n"
"da geslo določite in tako zaščitite svoje datoteke in podatke.\n"
"\n"
"Ko klilnete \"%s\", lahko dodate tudi druge navadne uporabnike.\n"
"Posebene uporabniške račune lahko ustvarite za svoje prijatelje\n"
"in za člane svoje družine.\n"
"\n"
"Ko boste dokončali z dodajanjem uporabniških računov, kliknite \"%s\".\n"
"\n"
"S klikom na \"%s\" lahko spremenite \"lupino\" (shell) za posameznega\n"
"uporabnika. Privzeta lupina je \"bash\".\n"
"\n"
"Ko boste končali z dodajanjem uporabnikov, boste imeli možnost,\n"
" da izberete uporabnika, za katerega želite, da se ob zagonu samodejno\n"
"prijavi v sistem. Če želite uporabiti to možnost, izberite uporabnika in\n"
"namizno okolje ter kliknite \"%s\". Če te možnosti ne želite izbrati,\n"
"odstranite oznako iz okenca \"%s\"."
#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "Uporabniško ime"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321
#: network/thirdparty.pm:322 printer/printerdrake.pm:3678
#: standalone/drakTermServ:383 standalone/drakbackup:3940
#: standalone/drakbackup:4034 standalone/drakbackup:4051
#: standalone/drakbackup:4069 ugtk2.pm:510
#, c-format
msgid "Next"
msgstr "Naprej"
#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Želite uporabiti to možnost?"
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Na seznamu so razdelki za Linux, ki jih je čarovnik zaznal na vašem\n"
"trdem disku. Lahko obdržite nastavitve, ki jih je izbral čarovnik, saj so\n"
"primerne za večino običajnih namestitev. Če boste te nastavitve "
"spreminjali,\n"
"morate določiti vsaj korenski razdelek (\"/\"). Razdelek naj ne bo "
"premajhen,\n"
"da boste lahko namestili dovolj programja. Če želite svoje podatke shraniti\n"
" na poseben razdelek, ustvarite tudi domači razdelek \"/home\".\n"
"(To je mogoče samo, če imate na disku več razdelkov za Linux.)\n"
"\n"
"Vsak razdelek je predstavljen na naslednji način: \"Ime\", \"Zmogljivost\".\n"
"\n"
"\"Ime\" sestavljajo: \"Vrsta trdega diska\", \"Številka trdega diska\",\n"
"\"Številka razdelka\" (n.pr. \"hda1\".\n"
"\n"
"\"Vrsta trdega diska\" je \"hd\", če gre za IDE disk in \"sd\", če gre za\n"
"SCSI disk\n"
"\n"
"\"Številka trdega diska\" je vedno črka, ki sledi oznaki \"hd\" ali \"sd\".\n"
"Za IDE trdi disk:\n"
" * \"a\" pomeni \"glavni trdi disk na primarnem IDE vodilu\"\n"
"\n"
" * \"b\" pomeni \"suženjski trdi disk na primarnem IDE vodilu\"\n"
"\n"
" * \"c\" pomeni \"glavni trdi disk na sekundarnem IDE vodilu\"\n"
"\n"
" * \"d\" pomeni \"suženjski trdi disk na sekundarnem IDE vodilu\"\n"
"\n"
"Pri SCSI trdih diskih pomeni \"a\" \"najnižji SCSI ID\", \"b\"\n"
"\"drugi najnižji SCSI ID\" itd."
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Namestitev za Mandriva Linux je shranjena na več zgoščenkah.\n"
"Če je izbrani paket shranjen na drugi zgoščeniki, bo DrakX izvrgel\n"
"trenutno in vas pozval, da v pogon vstavite pravo zgoščenko.\n"
"če prave zgoščenke nimate, kliknite \"%s\" in željeni paketi ne\n"
"bodo nameščeni."
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"Za Mandriva Linux je dostopnih na tisoče različnih programskih paketov.\n"
"Da bi bilo upravljanje s paketi bolj preprosto, so razvrščeni v skupine\n"
"vsebinsko povezanih paketov.\n"
"\n"
"Skupine paketov so razvrščene v štiri kategorije, ki ustrezajo različnim \n"
"načinom uporabe\n"
"računalnika. Pakete iz različnih kategorij lahko poljubno dodajate ali \n"
"odstranjujete,\n"
"tako da namestitev kategorije \"Delovna postaja\" lahko vsebuje tudi pakete\n"
" iz kategorije\n"
"\"Razvoj\".\n"
"\n"
" * \"%s\" : Če nameravate računalnik uporabljati predvsem kot delovno \n"
"postajo,\n"
"izberite eno ali več skupin iz te kategorije.\n"
"\n"
" * \"%s\" : Če boste računalnik uporabljali za programiranje, izberite\n"
" ustrezne\n"
"skupine paketov iz te kategorije.\n"
"\n"
" Če boste izbrali skupino \"LSB\", bo namesto privzetega jedra iz\n"
"serije \"2.6\" nameščeno jedro iz serije \"2.4\".\n"
"\n"
" * \"%s\" : Če bo vaš računalnik služil za strežnik, izberite storitve, ki \n"
"jih želite namestiti.\n"
"\n"
" * \"%s\" : Tukaj lahko izberete svoje željeno grafično okolje. Če želite,\n"
" da bo grafični\n"
"vmesnik dostopen, morate izbrati vsaj eno grafično okolje.\n"
"\n"
"Če premaknete miškin kazalec na ime skupine, se bo prikazalo kratko \n"
"pojasnilo\n"
"o tej skupini. Če med običajno namestitvijo (ne pa tudi med "
"posodobitvijo!) \n"
"izločite\n"
"vse skupine paketov, se bo odprlo pogovorno okno s predlogi za najmanjšo\n"
"možno namestitev:\n"
" * \"%s\" : Namesti najmanjše število paketov, ki še omogoča uporabo \n"
"grafičnega namizja.\n"
" * \"%s\" : Namesti osnovni sistem in osnovna orodja s pripadajočo \n"
"dokumentacijo.\n"
"To je primerna namestitev za postavitev strežnika.\n"
"\n"
" * \"%s\" : Namesti res najmanjše mogoče število paketov, ki so potrebni "
"za \n"
"delujoč\n"
"GNU/Linux sistem. Pri tej namestitvi boste kot vmesnik lahko uporabljali \n"
"samo\n"
"ukazno vrstico. Celotna velikost te namestitve znaša 65 MB.\n"
"\n"
"Če želite imeti popoln nadzor nad izbiro paketov, ki bodo nameščeni, \n"
"označite\n"
"okence\"%s\". \n"
"\n"
"Če ste za vrsto namestitve izbrali \"%s\", lahko izločite vse skupine. "
"Tako \n"
"ne bo\n"
"na novo nameščen noben paket. Ta način je primeren za nadgrajevanje\n"
"ali za popravljanje namestitve."
#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Delovna postaja"
#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Razvoj"
#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Grafično okolje"
#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Izbira posamičnih paketov"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Posodobitev "
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "Z X"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "Z osnovno dokumentacijo"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "Zares minimalna namestitev"
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"Če ste določili posamično izbiro paketov,\n"
"bodo vsi paketi prikazani v drevesnem pregledu in \n"
"razvrščeni v skupine in podskupine.\n"
"Izberete lahko namestitev cele skupine, podskupine\n"
"ali posamezne pakete.\n"
"\n"
"Ko izberete posamezen paket, se v levem oknu prikaže\n"
"njegov opis.\n"
"\n"
"!! Če izberete paket ali skupino paketov, ki vsebuje strežnik,\n"
"boste morali namestitev takšnega paketa na izrecno vprašanje\n"
"potrditi. Mandriva Linux namreč kot privzeto vključi vse\n"
" nameščene storitve ob zagonu sistema. Čeprav ob izdaji\n"
"te različice Mandriva Linuxa ni bilo znanih težav v zvezi z varnostjo,\n"
"je mogoče, da so bile odkrite varnostne luknje kasneje. Če za \n"
"določeno storitev ne veste, kaj je njena naloga, kliknite \"%s\" S klikom\n"
"na \"%s\"bodo nameščene naštete storitve, sistem pa jih bo samodejno\n"
"vključil ob vsakem zagonu.!!\n"
"\n"
"Če izberete \"%s\", boste onemogočili opozorilno okno, ki se prikaže\n"
"vsakokrat, ko program za nameščanje samodejno izbere paket za zadovoljitev\n"
"odvisnosti. Nekateri paketi so med seboj povezani, tako da namestitev\n"
"enega zahteva tudi namestitev drugih paketov. Program za nameščanje "
"samodejno\n"
"določi, katere med seboj odvisne pakete je potrebno namestiti,\n"
"da bo namestitev uspešna.\n"
"\n"
"Drobna ikona z disketo na dnu seznama vam omogoča, da naložite\n"
"seznam paketov, ki je bil oblikovan ob prejšnji namestitvi. To je koristno\n"
"zlasti v primeru, da želite na več računalnikih izvesti enako namestitev\n"
"Če kliknete na to ikono, vas bo program za nameščanje pozval, da v pogon "
"vstavite\n"
"disketo, ki ste jo ustvarili ob koncu neke druge namestitve.\n"
"Oglejte si drugi namig zadnjega koraka o tem, kako ustvariti takšno disketo"
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:904
#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:309 standalone/net_applet:374
#: ugtk2.pm:915 wizards.pm:156
#, c-format
msgid "No"
msgstr "Ne"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:904 interactive.pm:157
#: modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:308
#: standalone/net_applet:378 ugtk2.pm:915 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Da"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "Samodejne odvisnosti"
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\": S klikom na \"%s\" lahko zaženete čarovnika za nastavljanje "
"tiskalnikov.\n"
"V dokumentaciji lahko preberete več o priključitvi in nastavljanju "
"tiskalnikov.\n"
"Prikaz nastavljanja tiskalnikov v dokumentaciji je podoben prikazu na "
"zaslonu\n"
"med nastavljanjem."
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2327 standalone/drakbackup:2331
#: standalone/drakbackup:2335 standalone/drakbackup:2339
#, c-format
msgid "Configure"
msgstr "Nastavite"
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Izberite storitve, ki naj se vključijo ob zagonu računalnika.\n"
"\n"
"Pazljivo preglejte vse dostopne storitve in izločite tiste, ki jih ob "
"zagonu\n"
"ne potrebujete.\n"
"\n"
"Ko izberete posamezno storitev, se prikaže okno s kratkim pojasnilom.\n"
"Če niste prepričani, kakšno nalogo opravljajo posamezne storitve, bo\n"
"varneje, če ohranite privzeto nastavitev.\n"
"\n"
"!! V primeru, da nameravate svoj računalnik uporabljati kot strežnik,\n"
"verjetno nočete, da bi se ob zagonu vključila katera od storitev,\n"
"ki jih ne potrebujete. Mnoge storitve so namreč lahko nevarne,\n"
"če so omogočene na strežniku. Vsekakor omogočite samo tiste storitve,\n"
"ki jih resnično potrebujete!!"
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux uporablja za nastavitev časa GMT (Greenwich Mean Time), ki ga \n"
"lahko prevede v krajevni čas glede na časovni pas, ki ga izberete. Če je\n"
"čas na vaši matični plošči nastavljen na krajevni čas, lahko to izključite\n"
" z odstranitvijo oznake \"%s\". GNU/Linux bo tako zaznal, da sta ura "
"matične\n"
"plošče in sistemska ura nastavljeni na isti časovni pas. To je koristno "
"posebej\n"
"v primeru, da imate nameščen še kakšen operacijski sistem , na primer Okna\n"
"(Windows™)\n"
"\n"
"Če omogočite \"%s\", bo nastavitev sistemske ure potekala samodejno preko\n"
"internetne povezave z oddaljenim strežnikom. Da bi ta storitev delovala, "
"morate\n"
"imeti vzpostavljeno internetno povezavo. Najbolje je , če izberete strežnik "
"v vaši\n"
"bližini. Obenem boste namestili tudi časovni strežnik, s pomočjo katerega "
"lahko\n"
"uporabljajo tudi drugi računalniki v krajevnem omrežju."
#: help.pm:217 install_steps_interactive.pm:879
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Sistemska ura nastavljena na GTM"
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "Samodejno usklajevanje časa"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Grafična kartica\n"
"\n"
" Namestilnik navadno samodejno zazna in nastavi grafično\n"
"kartico, ki je priključena v računalniku. Če temu ni tako, lahko\n"
"s seznama izberete pravo kartico.\n"
"\n"
" Če vašo grafično kartico podpirajo različni strežniki, takšni s 3D\n"
"pospeševanjem in takšni brez, izberite strežnik, ki najbolj ustreza\n"
"vašim potrebam."
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X (X okenski sistem) je srce grafičnega vmesnika za GNU/Linux\n"
"na katerem so zgrajeni vsa v Mandriva Linux vključena grafična\n"
"okolja. (KDE,GNOME, AfterStep, WindowMaker. itd)\n"
"\n"
"Predočen vam bo seznam različnih vrednosti, ki jih lahko spreminjate,\n"
"tako, da dosežete najboljši grafični prikaz: Grafična kartica\n"
"\n"
" Program za nameščanje navadno samodejno zazna in nastavi grafično\n"
"kartico, ki je priključena v računalniku. Če temu ni tako, lahko\n"
"s seznama izberete pravo kartico.\n"
"\n"
" Če vašo grafično kartico podpirajo različni strežniki, takšni s 3D\n"
"pospeševanjem in takšni brez, izberite strežnik, ki najbolj ustreza\n"
"vašim potrebam.\n"
"\n"
"\n"
"\n"
"Zaslon\n"
" Program za nameščanje navadno samodejno zazna in nastavi zaslon,\n"
"ki je priključen na računalnik. Če temu ni tako, lahko\n"
"s seznama izberete pravi zaslon.\n"
"\n"
"\n"
"\n"
"Ločljivost\n"
"...Izberite ustrezno ločljivost in barvno globino za vašo strojno opremo.\n"
"Izberite vrednosti, ki vam najbolj ustrezajo. Te vrednosti boste lahko\n"
"spreminjali tudi po namestitvi. Primer namestitve je prikazan na sliki\n"
"zaslona.\n"
"\n"
"\n"
"\n"
"Preizkus\n"
"\n"
" Ali se bo ta vnos pojavil, je odvisno od vaše strojne opreme.\n"
"\n"
" Sistem bo skušal odpreti grafični zaslon z željeno ločljivostjo.\n"
"Če boste med preizkusom videli sporočilo in odgovorili \"%s\",\n"
"bo DrakX nadaljeval k naslednjemu koraku. Če se sporočilo ne bo\n"
"prikazalo, potem samodejna nastavitev ni pravilna.\n"
"Po izteku 12 sekund se boste vrnili k nastavitvam. Spreminjajte nastavitve,\n"
"dokler na zaslonu ne dobite pravilnega prikaza.\n"
"\n"
"\n"
"\n"
"Izbire\n"
"\n"
"Izberite, ali želite, da se grafični vmesnik vključi ob zagonu računalnika.\n"
"Če tega ne želite, če bo vaš računalnik deloval kot strežnik\n"
"ali če vam ni uspelo nastaviti zaslona, označite \"%s\"."
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"Zaslon\n"
"\n"
"...Namestilnik običajno samodejno zazna in nastavi zaslon, ki je\n"
"priključen na računalnik. Če je samodejna nastavitev napačna, lahko\n"
"s seznama izberete pravi zaslon."
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"Ločljivost\n"
"\n"
"...Izberite ločljivost in barvno globino, ki ustreza vaši strojni opremi.\n"
"Te nastavitve boste lahko spreminjali tudi po končani namestitvi.\n"
"Primer izbrane nastavitve je prikazan na sliki zaslona."
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"Če je za vašo grafično kartico na voljo več strežnikov, takšnih, ki\n"
"omogočajo 3D pospeševaje in takšnih, ki tega ne omogočajo,\n"
"izberite strežnik, ki ustreza vašim potrebam."
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"Izbire\n"
"\n"
" Izberite, ali želite, da se grafični vmesnik vključi ob zagonu "
"računalnika.\n"
"Če tega ne želite, če bo vaš računalnik deloval kot strežnik\n"
"ali če vam ni uspelo nastaviti zaslona, označite \"%s\"."
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"Določite, na katerem delu trdega diska naj bo nameščen operacijski\n"
"sistem Mandriva Linux. Če je trdi disk prazen ali če na njem nameščeni\n"
"operacijski sistem zaseda celoten prostor, boste morali disk razdeliti na\n"
"posamezne razdelke. Razdeljevanje trdega diska izvede logično\n"
"razdelitev, ki zagotovi potrebni prostor za namestitev operacijskega\n"
"sistema Mandriva Linux.\n"
"\n"
"Trdega diska po izvršenem razdeljevanju običajno ni mogoče povrniti v "
"prejšnje stanje.\n"
"Če imate na disku že nameščen operacijski sitem,lahko med razdeljevanjem\n"
"trdega diska pride do izgube podatkov. Če ste neizkušeni, je razdeljevanje\n"
"diska lahko zelo stresno opravilo. Na srečo pa je v DrakX vključen "
"čarovnik,\n"
"ki razdeljevanje zelo olajša. Vzemite si čas in pred nadaljevanjem pozorno\n"
"preberite nadaljevanje tega sestavka.\n"
"\n"
"Na voljo je več možnosti, ki so odvisne od nastavitev vašega diska.\n"
"\n"
" * \"%s\": To možnost izberite, če imate prazen disk. Čarovnik bo disk "
"razdelil\n"
"samodejno in razdeljevanje bo s tem končano.\n"
"\n"
" * \"%s\": Čarovnik je na vašem trem disku zaznal enega ali več razdelkov\n"
"za Linux. Če želite za namestitev uporabiti zaznane razdelke, izberite to "
"možnost.\n"
"Čarovnik vas bo v nadaljevanj pozval, da določite priklopne točke "
"posameznim\n"
"razdelkom. Običajno je najbolje obdržati priklopne točke, ki jih predlaga "
"čarovnik.\n"
"\n"
" * \"%s\": Če imate na disku nameščena Okna (Windows™), tako da zasedajo\n"
"celoten disk, bo potrebno ustvariti prazen prostor za namestitev GNU/"
"Linuxa.\n"
"To lahko storite tako, da izbrišete razdelek z Okni ali tako, da razdelku\n"
"FAT ali NTFS z nameščenimi Okni spremenite velikost. Pri tem podatkov na\n"
"razdelku ne boste izgubili, če najprej v Oknih defragmentirate disk.\n"
"Vsekakor pa priporočamo, da pred nadaljevanjem napravite varnostno\n"
"kopijo podatkov. Če želite uporabljati oba operacijska sistema, Mandriva "
"Linux\n"
"in Okna (Windows™), vam priporočamo, da izberete to možnost.\n"
"\n"
" Če se odločite za to možnost, morate vedeti, da bo po končanem postopku\n"
"razdelek z Okni manjši in imeli boste manj prostora za shranjevanje podatkov "
"ali\n"
" nameščanje novih programov v Oknih.\n"
"\n"
" * \"%s\": Če želite izbrisati vse obstoječe razdelke z vsemi podatki in "
"jih \n"
"nadomestiti s sistemom Mandriva Linux, izberite to možnost.\n"
"Bodite previdni, ko boste potrdili to izbiro, prejšnjega stanja ne bo več "
"mogoče vzpostaviti.\n"
"\n"
" !!Če izberete to možnost, boste z diska izbrisali vse podatke.!!\n"
"\n"
" * \"%s\":Ta možnost se pojavi, če celotni disk zaseda jo Okna.\n"
" S tem boste s trdega diska preprosto izbrisali vse, kar je njem\n"
"in pričeli z novim razdeljevanjem diska.\n"
"\n"
" !!Če izberete to možnost, boste z diska izbrisali vse podatke.!!\n"
"\n"
" * \"%s\": Če želite disk razdeliti ročno, izberite to možnost. Pazite, \n"
"to je sicer močno, vendar nevarno orodje, saj lahko z njim kaj hitro "
"zbrišete\n"
"podatke na disku. To možnost zares priporočamo samo tistim, ki že imajo\n"
"nekaj izkušenj z razdeljevanjem diskov. Obsežnejša navodila za delo\n"
" z orodjem DiskDrake boste našli v dokumentaciji."
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "Uporabi razpoložljivi prostor"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "Uporabi obstoječi razdelek"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "Uporabi razpoložljivi prostor v razdelku za Okna (Windows™)"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "Izbriši celoten disk"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "Odstrani Okna (Windows™)"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "Ročno razdeljevanje diska"
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"Namestitev je končana in vaš novi GNU/Linux je pripravljen za uporabo\n"
"Kliknite \"%s\" in sistem se bo ponovno zagnal. Ne pozabite odstraniti\n"
"vira namestitve (zgoščenke ali diskete) Neposredno po zagonu bo na\n"
"zaslonu prikazan meni zagonskega nalagalnika, s pomočjo katerega\n"
"lahko izberete, kateri operacijski sistem naj se zažene.\n"
"\n"
"Gumb \"%s\" vam prikaže dodatne gumbe:\n"
"\n"
" * \"%s\": za izdelavo namestitvene diskete, s pomočjo katere boste lahko\n"
"podobno namestitev, kot ste jo pravkar oblikovali, izvedli povsem\n"
"samodejno.\n"
"\n"
" Če kliknete na ta gumb, boste imeli na voljo dve nadaljnji možnosti:\n"
" * \"%s\": Delno samodejna namestitev. Ročno boste lahko izvedli\n"
"samo razdeljevanje diska.\n"
" * \"%s\": Povsem samodejna namestitev. Z diska bodo izbrisani vsi\n"
"podatki.\n"
" To je zelo uporabno za namestitev sistema na več podobnih\n"
"računalnikov. Več o tem najdete na spletni strani Mandriva.\n"
"\n"
" * \"%s\"(*):S tem shranite seznam paketov, ki so bili izbrani med to\n"
"namestitvijo. Če želite izvesti namestitev z enakim naborom paketov,\n"
"vstavite disketo v pogon in pričnite z namestitvijo. Pritisnite tipko\n"
"[F1] in vpišite >>linux defcfg=\"floppy\" <<. (*)potrebujete disketo, "
"formatirano v FAT datotečnem sistemu.\n"
"V GNU/Linux sistemu disketo formatirate z ukazom\n"
"\"mformat a:\", ali \"fdformat /dev/fd0\", ki mu sledi ukaz\n"
"\"mkfs.vfat /dev/fd0\"."
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "Ustvari disketo za samodejno namestitev"
#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Replay"
msgstr "Ponovi"
#: help.pm:409 install_steps_interactive.pm:1330
#, c-format
msgid "Automated"
msgstr "Samodejno"
#: help.pm:409 install_steps_interactive.pm:1333
#, c-format
msgid "Save packages selection"
msgstr "Shrani izbiro paketov"
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"Če želite na novo formatirati obstoječe razdelke, da bi z njih zbrisali\n"
"podatke, izberite tudi vse takšne razdelke.\n"
"\n"
"Ni potrebno, da ponovno formatirate vse obstoječe razdelke.\n"
"Formatirati morate razdelke, na katere boste namestili operacijski\n"
"sistem (npr. razdelke \"/\", \"/usr\", \"/var\"), ni pa vam treba "
"formatirati\n"
"razdelkov, ki vsebujejo podatke, ki bi jih radi obdržali (npr. \"/home\")\n"
"\n"
"Pri izbiri razdelkov ravnajte skrbno! Po formatiranju bodo vsi podatki "
"izgubljeni!\n"
"\n"
"Kliknite na \"%s\",ko boste pripravljeni na razdeljevanje.\n"
"\n"
"Kliknite na \"%s\", če želite za namestitev sistema Mandriva Linux\n"
"izbrati drug razdelek.\n"
"\n"
"Kliknite na \"%s\", če želite določiti razdelke, na katerih naj sistem\n"
"preveri poškodovane bloke."
#: help.pm:431 install_steps_gtk.pm:388 interactive.pm:433
#: interactive/newt.pm:318 printer/printerdrake.pm:3676
#: standalone/drakTermServ:362 standalone/drakbackup:3900
#: standalone/drakbackup:3939 standalone/drakbackup:4050
#: standalone/drakbackup:4065 ugtk2.pm:508
#, c-format
msgid "Previous"
msgstr "Nazaj"
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"Verjetno so bili od njegove izdaje pa do časa, ko nameščate\n"
"Mandriva Linux na svoj računalnik, nekateri paketi popravljeni\n"
"ali nadgrajeni z varnostnimi popravki ali z odstranitvijo hroščev.\n"
"Te popravke lahko prenesete z interneta. Če imate vzpostavljeno\n"
"internetno povezavo, označite \"%s\", če pa želite namestiti\n"
"popravke s paketi kasneje, označite \"%s\".\n"
"\n"
"Če izberete \"%s\", se bo prikazalo okno s seznamom spletnih\n"
"mest, od koder lahko prenesete pakete. Izberite mesto, ki vam\n"
"je najbliže, pritisnite \"%s\", da boste pakete prenesli in namestili\n"
"Če tega ne želite, pritisnite \"%s\"."
#: help.pm:444 help.pm:588 install_steps_gtk.pm:387
#: install_steps_interactive.pm:155 standalone/drakbackup:4097
#, c-format
msgid "Install"
msgstr "Namesti"
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"Izberite stopnjo varnosti za svoj računalnik. Če boste na računalniku\n"
"hranili pomembne podatke ali če imate neposredno povezavo z\n"
"internetom, nastavite višjo stopnjo varnosti. Uporaba sistema, ki ima\n"
"nastavljeno višjo stopnjo varnosti je običajno zahtevnejša.\n"
"\n"
"Če se ne morete odločiti, kako bi nastavili stopnjo varnosti,\n"
"pustite privzete nastavitve. Stopnjo varnosti lahko spremenite\n"
"tudi kasneje s pomočjo orodja \"draksec\" v Nadzornem središču.\n"
"\n"
"V polje \"%s\" lahko vnesete e-poštni naslov uporabnika, ki bo odgovoren za\n"
"varnost sistema. Vsa varnostna obvestila bodo poslana\n"
"temu uporabniku."
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "Upravitelj varnostnih nastavitev"
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"Izbrati morate razdelke, na katere boste namestitli sistem\n"
"Mandriva Linux. Če ste razdelke že izbrali ob kakšni predhodni\n"
"namestitvi GNU/Linux sistema s kakim drugim orodjem za\n"
"razdeljevanje, lahko uporabite obstoječe razdelke, sicer pa morate\n"
"razdelke trdega diska za namestitev določiti sedaj.\n"
"\n"
"Najprej izberite trdi disk, ki ga želite razdeliti. Če želite izbrati\n"
"disk na prvem IDE vodilu, kliknite na \"hda\", disk na drugem\n"
"IDE vodilu ima oznako \"hdb\", na prvem SCSI vodilu \"sda\" itd.\n"
"\n"
"Za razdelitev izbranega diska so vam na voljo naslednje možnosti:\n"
"\n"
" * \"%s\": brisanje vseh razdelkov na izbranem disku\n"
"\n"
" * \"%s\": samodejno ustvarjanje ext3 in izmenjalnih (swap) razdelkov\n"
"na prostem delu vašega trdega diska.\n"
"\n"
"\"%s\": dostop do dodatnih možnosti:\n"
"\n"
" * \"%s\": shranjevanje razdelitvene tabele na disketo, kar vam omogoči,\n"
"da razdelitveno tabelo obnovite, če je to potrebno.\n"
"Priporočamo vam, da ta korak izvedete!\n"
"\n"
" * \"%s\": obnovitev razdelitvene tabele z diskete.\n"
"\n"
" * \"%s\": popravilo poškodovane razdelitvene tabele, ki pa ne\n"
"učinkuje v vsakem primeru.\n"
"\n"
" * \"%s\": odstranitev vseh sprememb in obnovitev prvotne razdelitvene\n"
"tabele trdega diska.\n"
"\n"
" * \"%s\": če odstranite označitev te možnosti, bo moral uporabnik\n"
"ročno priklapljati odstranljive medije, kot sta disketni in CD pogon.\n"
"\n"
" * \"%s\": To možnost izberite, če želite za razdeljevanje diska\n"
"uporabiti čarovnika. To vam priporočamo, če razdeljevanja diska\n"
"ne obvladate v celoti.\n"
"\n"
" * \"%s\": preklic vseh sprememb.\n"
"\n"
" * \"%s\": dodatne možnosti nastavitev razdelkov (vrsta datotečnega\n"
"sistema, formatiranje, nastavitve) in prikaz obširnejših informacij o\n"
"trdem disku.\n"
"\n"
" * \"%s\": shranjevanje sprememb na trdi disk po končanem\n"
"razdeljevanju.\n"
"\n"
"Za določanje velikosti razdelka lahko uporabite tipke s puščicami\n"
"[Levo/Desno] na tipkovnici.\n"
"\n"
"Vsako možnost lahko dosežete z uporabo tipkovnice. Med razdelki\n"
"se premikate s tipko [TAB] ali s puščicami [Gor/Dol].\n"
"\n"
"Ko izberete razdelek, lahko uporabite naslednje ukaze:\n"
"\n"
" * Ctrl-c za ustvarjanje novega razdelka\n"
"\n"
" * Ctrl-d za brisanje razdelka\n"
"\n"
" * Ctrl-m za nastavitev priklopne točke\n"
"\n"
"Vse nadaljnje informacije o datotečnih sistemih boste našli v\n"
"dokumentaciji.\n"
"\n"
"Če Mandriva Linux nameščate na PPC računalnik, morate ustvariti\n"
"zagonski \"bootstrap'\" razdelek z velikostjo najmanj 1MB, ki ga\n"
"uporablja zagonski nalagalnik yaboot. Če ta razdelek nekoliko\n"
"povečate in mu namenite vsaj 50MB, boste nanj lahko shranjevali\n"
"potrebne datoteke za zasilni zagon sistema."
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "Samodejno priklapljanje odstranljivih medijev"
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "Preklapljanje med normalnim in izvedenskim načinom"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"Na vašem trdem disku je več kot en razdelek za Okna (Windows™).\n"
"Izberite razdelek, ki ga želite zmanjšati, da bi pridobili prostor za\n"
"namestitev sistema Mandriva Linux.\n"
"\n"
"Na seznamu so razdelki s podatki: \"Ime v Linuxu\", \"Ime v Oknih\"\n"
"\"Velikost\" \n"
"\"Ime v Linuxu\" vsebuje: \"vrsto trdega diska\", \"številko trdega diska\"\n"
"\"številko razdelka\" (n.pr. \"hda1\")\n"
"\n"
"\"Vrsta trdega diska\" je \"hd\", če gre za IDE disk in \"sd\", če gre za \n"
"SCSI disk.\n"
"\n"
"\"Številka trdega diska\" je vedno črka, ki sledi oznaki \"hd\" oziroma\n"
"\"sd\". Pri IDE diskih:\n"
"\n"
" * \"a\" pomeni \" glavni trdi disk na primarnem IDE vodilu\"\n"
"\n"
" * \"b\" pomeni \" podrejeni trdi disk na primarnem IDE vodilu\"\n"
"\n"
" * \"c\" pomeni \" glavni trdi diski na sekundarnem IDE vodilu\"\n"
"\n"
" * \"d\" pomeni \" podrejeni trdi diski na sekundarnem IDE vodilu\"\n"
"\n"
"Pri SCSI trdih diskih pomeni \"a\" \"najnižji SCSI ID\", \"b\"\n"
"\"drugi najnižji SCSI ID\" itd.\n"
"\n"
"\"Ime v Oknih\" je črka, s katero je disk označen v Oknih.\n"
"Prvi disk ali oziroma razdelek je označen s \"C:\"."
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\":Preverite, katero državo ste izbrali. Če v resnici niste v izbrani "
"državi,\n"
"kliknite \"%s\" in izberite drugo. Če država, v kateri ste, ni prikazana,\n"
"kliknite \"%s\" za prikaz celotnega seznama držav."
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandriva Linux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandriva Linux version \"8.1\" is not recommended."
msgstr ""
"Ta korak se zažene samo v primeru, da na vašem računalniku že obstaja\n"
"razdelek zaGNU/Linux.\n"
"\n"
"Lahko izbirate med novo namestitvijo in med posodobitvijo obstoječega\n"
"sistema Mandriva Linux.\n"
"\n"
" * \"%s\": S tem boste obstoječi sistem povsem odstranili. Če želite\n"
"spremeniti razdelitev trdega diska ali datotečni sistem, izberite to\n"
"možnost. V nekaterih primerih, odvisno od tega, kako je razdeljen\n"
"disk, lahko ohranite nekatere obstoječe podatke.\n"
"\n"
" * \"%s\": Ta način namestitve dopušča posodobitev obstoječih\n"
"paketov. S tem nista ogrožena niti razdelitev diska niti shranjeni\n"
"podatki. Večina preostalih korakov namestitve bo dosegljiva,\n"
"podobno kot pri običajni novi namestitvi.\n"
"\n"
"Možnost \"Posodobitev\" deluje, če imate nameščeno različico\n"
"sistema Mandriva Linux \"8.1\" ali novejšo. Posodobitve starejših\n"
"različic od \"8.1\" ne priporočamo."
#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"DrakX bo samodejno izbral razpored tipkovnice glede na jezik, ki ste\n"
"ga izbrali. Če vam to ne ustreza, zamenjajte razpored tipkovnice.\n"
"\n"
"Morda vam ustreza, da uporabljate drugačen razpored tipkovnice,\n"
"kot pripada izbranemu jeziku. Če sicer govorite angleško,\n"
"živite pa v Sloveniji, vam bo najbrž ustrezal slovenski razpored.\n"
"V tem koraku namestitve lahko izberete razpored tipkovnice, ki vam\n"
"najbolj ustreza.\n"
"\n"
"Kliknite na gumb \"%s\" in pojavil se bo seznam vseh tipkovnic, ki jih "
"sistem podpira.\n"
"\n"
"Če ste izbrali tipkovnico, ki temelji na nelatinični abecedi,\n"
"lahko v naslednjem koraku določite ukaz, ki vam bo omogočil\n"
"preklapljanje med latiničnim in nelatiničnim razporedom tipkovnice."
#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandriva Linux's use of UTF-8 "
"will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"Najprej izberite jezik, ki ga želite uporabljati.\n"
"\n"
"Izbira jezika bo vplivala na jezik namestitve, dokumentacije in \n"
"celotnega sistema. Najprej izberite celino oziroma regijo, kjer\n"
"živite in nato še jezik, ki ga govorite.\n"
"\n"
"Če kliknete na gumb \"%s\", boste lahko izbrali dodatne jezike,\n"
"ki jih želite namestiti. Če bodo uporabljali vaš sistem uporabniki,\n"
" ki govorijo različne jezike, lahko kot privzeti jezik namestite\n"
"slovenščino, tako da jo izberete v drevesnem pogledu. Kot dodatni\n"
"jezik pa lahko namestite na primer angleščino, tako da izberete \"%s\"v "
"naprednem načinu.\n"
"\n"
"Podpora Utf-8 (unicode) Unicode je kodiranje znakov, ki poizkuša\n"
"zagotoviti pravilen prikaz pisav vseh poznanih jezikov. Ker je unicode\n"
" za GNU/Linux še v razvoju, lahko določite, ali naj ga sistem uporablja\n"
"ali ne.\n"
"\n"
" * Če izberete jezike s kodiranjem latin1, kot so ruščina, japonščina,\n"
"grščina in večina jezikov ki uporabljajo nabor znakov iso-8859-2, bo\n"
"kot privzeto kodiranje nastavljeno latin1.\n"
"\n"
" * Ostali jeziki bodo kot privzeto kodiranje uporabljali unicode.\n"
"\n"
" * če izberete dva ali več jezikov, ki uporabljajo različna kodiranja,\n"
"bo unicode uporabljal celoten sistem.\n"
"\n"
" * Unicode lahko določite kot privzeto kodiranje tako, da izberete \"%s\"\n"
"ne glede na to, kateri jezik ste izbrali.\n"
"\n"
"Število dodatnih jezikov ni omejeno, lahko jih izberete več.\n"
"z izbiro \"%s\" pa lahko izberete vse jezike. Če boste izbrali to možnost\n"
"bodo nameščeni tudi paketi s pisavami, prevodi, črkovalniki itd.\n"
"za vse izbrane jezike.\n"
"\n"
"Za preklapljanje med različnimi jeziki poženete ukaz \"localedrake\"\n"
"kot \"root\". V tem primeru bo zamenjava jezika veljala za celoten sistem.\n"
"Če pa isti ukaz poženete kot navaden uporabnik, bo sprememba veljala\n"
"le za trenutnega uporabnika."
#: help.pm:647
#, c-format
msgid "Espanol"
msgstr "Angleščina"
#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"DrakX običajno nima težav z zaznavanjem števila tipk vaše miške.\n"
"V primeru, da pa se težave pojavijo, upošteva predpostavko, da ima\n"
"miška dve tipki, in nastavi emulacijo tretje tipke. Tretjo tipko\n"
"miške z dvema tipkama v tem primeru nadomešča istočasni pritisk na\n"
"obe tipki. DrakX samodejno zazna tudi, na kateri vmesnik je vaša\n"
"miška priključena. (PS/2, serijska vrata, USB,)\n"
"\n"
"Če imate miško s tremi tipkami, vendar brez kolesca, izberite miško\n"
"\"%s\". DrakX jo bo nastavil tako,\n"
"da boste kolesce lahko simulirali s pritiskom na srednjo\n"
"tipko ob istočasnem premikanju miške v smeri gor - dol.\n"
"\n"
"Če želite nastaviti drugačno vrsto miške, lahko to storite tako, da\n"
"jo izberete s seznama.\n"
"Z možnostjo \"%s\", boste izbrali generično miško, ki deluje skoraj\n"
"z vsemi vrstami mišk.\n"
"\n"
"Če izberete miško, različno od privzete, se bo prikazalo preizkusno\n"
"okno. Preizkusite delovanje vseh tipk in njihovih funkcij ter se "
"prepričajte,\n"
"da delujejo pravilno. Če miška ne deluje pravilno, pritisnite preslednico,\n"
"da se boste vrnili v okno za izbiro miške.\n"
"\n"
"Občasno se zgodi, da miške s koleščkom program za nameščanje ne zazna\n"
"samodejno. Prepričajte se, da je ročno izbrana miška priključena\n"
"na ista vrata, kot je v resnici priključena vaša miška. Ko boste izbrali "
"miško\n"
"in pritisnili na gumb \"%s\", se bo na zaslonu prikazala slika miške.\n"
"Zavrtite miškino kolesce, da se prepričate, ali deluje pravilno.\n"
"Preizkusite še delovanje tipk in ali miškin kazalec sledi gibanju\n"
"miške."
#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "z emulacijo kolesca"
#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "Univerzalna | Katera koli PS/2 ali USB miška"
#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"Izberite prava vrata. Vrata, ki so v Oknih (Windows™) označena \"COM1\", "
"imajo v\n"
"GNU/Linuxu oznako \"ttyS0\"."
#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because "
"you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"S stališča varnosti je to eden od najpomembnejših korakov namestitve\n"
"GNU/Linux operacijskega sistema: določitev gesla korenskega, \"root\"\n"
"uporabnika. Korenski uporabnik je upravitelj sistema in je pooblaščen\n"
"za spreminjanje sistemskih nastavitev, dodajanje uporabnikov, nameščanje\n"
"programov, skratka, \"root\" lahko stori karkoli! Zato določite geslo, ki ga "
"ni\n"
"lahko uganiti. DrakX vas bo opozoril, če je izbrano geslo prelahko.\n"
"Lahko se tudi odločite, da gesla sploh ne določite, vendar vam to zares\n"
"odsvetujemo. GNU/Linux je v enaki meri občutljiv za napake operaterja,\n"
"kot katerikoli drug operacijski sistem, zato se lahko zgodi, da nehote\n"
"napravite kakšno nepopravljivo napako. Prav zato pa je pomembno,\n"
"da postati \"root\" ni preveč enostavno.\n"
"\n"
"Geslo naj bo sestavljeno iz črk in številk, vsebuje pa naj vsaj osem\n"
"znakov. Gesla uporabnika root si nikoli ne zapišite!\n"
"\n"
"Nasvet: geslo naj ne bo predolgo ali preveč zapleteno. Izberite\n"
"geslo, ki si ga boste lahko zapomnili!\n"
"\n"
"Medtem, ko geslo vpisujete, ga ni mogoče videti. Da bi se izognili\n"
"napakam pri tipkanju, ga morate vpisati dvakrat.\n"
"\n"
"Če želite, da bi dostop do računalnika nadzirala storitev za overjanje,\n"
"kliknite na gumb \"%s\".\n"
"\n"
"Če vaše omrežje uporablja storitev za overjanje domene LDAP,\n"
"NIS ali Windows domain authentication, izberite ustrezno storitev\n"
"za \"%s\". Če ne veste, katero morate izbrati, vprašajte omrežnega\n"
"operaterja.\n"
"\n"
"Če si gesla težko zapomnite, če vaš računalnik ne bo povezan\n"
"z internetom in če v celoti zaupate vsem, ki bodo uporabljali\n"
"vaš računalnik, lahko izberete \"%s\"."
#: help.pm:722
#, c-format
msgid "authentication"
msgstr "Overjanje"
#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if "
"you\n"
"know what you're doing."
msgstr ""
"LILO in GRUB sta zagonska nalagalnika za GNU/Linux.\n"
"Zagonski nalagalnik je programček, ki ga računalnik zažene \n"
"ob zagonu. Poskrbi za zagon celotnega sistema\n"
"Običajno je ta del namestitve povsem samodejen. DrakX analizira zagonski\n"
"sektor diska in določi ustrezne nastavitve\n"
"\n"
" * Če odkrije zagonski sektor za Okna (Windows™), ga nadomesti\n"
"z LILO ali GRUB zagonskim sektorjem. Tako boste lahko naložili\n"
"GRUB, LILO ali drug na računalnik nameščen sistem.\n"
"\n"
" * Če odkrije zagonski sektor GRUB ali LILO, ga nadomesti z novim.\n"
"\n"
"Če Drakx ne more tega določiti samodejno, vas bo vprašal,\n"
"kje naj namesti zagonski nalagalnik. Običajno je najbolj varno\n"
"mesto \"%s\". Če izberete \"%s\", zagonski nalagalnik ne bo nameščen\n"
"To možnost izberite samo, če zares veste, kaj delate. "
#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandriva Linux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandriva Linux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"Izberite sistem za tiskanje. Drugi operacijski sistemi navadno nudijo\n"
"en sistem, Mandriva Linux pa vam daje na izbiro dva.\n"
"Od obeh sistemov je vsak primeren za svojo vrsto namestitve.\n"
"\n"
" * \"%s\"--je kratica za ``print, do not queue\" (tiskaj, ne vnesi v čakalno "
"vrsto).\n"
"Ta sistem izberite, če imate s tiskalnikom neposredno povezavo, če želite\n"
"imeti možnost zaustavitve tiskalnika ob napakah in nimate omrežnega\n"
"tiskalnika. (\"%s\" je uporaben le za enostavna omrežna opravila in\n"
"je za uporabo v omrežjih nekoliko počasen.) Uporabo \"pdq\" vam\n"
"priporočamo, če je to vaša prva izkušnja s sistemom GNU/Linux.\n"
"\n"
" * \"%s\" - `` Common Unix Printing System'' je izvrstna izbira tako za\n"
"tiskanje na vašem krajevnem tiskalniku, kot za tiskanje kjerkoli na svetu.\n"
"Je enostaven za nastavljanje in lahko služi kot strežnik ali kot uporabnik\n"
"v starodavnem \"lpd\" tiskalniškem sistemu, tako da je združljiv s "
"starejšimi\n"
"operacijskimi sistemi, ki še potrebujejo tiskalniške storitve. Kljub temu, "
"da\n"
"je zelo močan sistem, je za nastavljanje skoraj tako enostaven,\n"
"kot \"pdq\".\n"
"Če potrebujete emulacijo lpd strežnika, vključite možnost \"cups-lpd\".\n"
"\"%s\" vsebuje grafične nastavitve za izbiro možnosti tiskanja in za\n"
"nastavljanje tiskalnika.\n"
"\n"
"Če kasneje ugotovite, da vam nastavitve, ki ste jih izbrali, ne ustrezajo,\n"
"jih lahko spremenite z orodjem PrinterDrake v nadzornem središču, tako\n"
"da kliknete gumb \"%s\"."
#: help.pm:765
#, c-format
msgid "pdq"
msgstr "pdq"
#: help.pm:765 printer/cups.pm:115 printer/data.pm:122
#, c-format
msgid "CUPS"
msgstr "CUPS"
#: help.pm:765
#, c-format
msgid "Expert"
msgstr "Napredno"
#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX bo najprej zaznal vse naprave, ki so v vašem računalniku\n"
"priključene na IDE vodila in vse PCI SCSI kartice. Če bo zaznal\n"
"eno ali več PCI SCSI kartic, bo zanje namestil ustrezne gonilnike.\n"
"\n"
"Zaznavanje strojne opreme ni povsem zanesljivo. Če DrakX katere\n"
"od naprav ne bo zaznal, jo boste morali dodati ročno.\n"
"\n"
"Če ste morali ročno dodati PCI SCSI kartico, vas bo DrakX povprašal,\n"
|