From 2683c67adfc63dfbd68a13f199c5929d2877c9e5 Mon Sep 17 00:00:00 2001 From: Antoine Ginies Date: Sat, 3 Apr 2004 12:57:25 +0000 Subject: remove file already in cluster/mdkc2 cvs branch --- rescue/tree/ka/gen_modules_conf.pl | 156 ---------- rescue/tree/ka/hostnames | 225 -------------- rescue/tree/ka/install.sh | 595 ------------------------------------- rescue/tree/ka/ka-d-client | Bin 17048 -> 0 bytes rescue/tree/ka/make_initrd | 49 --- rescue/tree/ka/setup_network.sh | 65 ---- rescue/tree/ka/tftpserver | 1 - 7 files changed, 1091 deletions(-) delete mode 100644 rescue/tree/ka/gen_modules_conf.pl delete mode 100644 rescue/tree/ka/hostnames delete mode 100755 rescue/tree/ka/install.sh delete mode 100755 rescue/tree/ka/ka-d-client delete mode 100755 rescue/tree/ka/make_initrd delete mode 100755 rescue/tree/ka/setup_network.sh delete mode 100644 rescue/tree/ka/tftpserver (limited to 'rescue/tree') diff --git a/rescue/tree/ka/gen_modules_conf.pl b/rescue/tree/ka/gen_modules_conf.pl deleted file mode 100644 index ca721482a..000000000 --- a/rescue/tree/ka/gen_modules_conf.pl +++ /dev/null @@ -1,156 +0,0 @@ -$kinds2all_modules = { - 'usb' => [ - 'usb-uhci', - 'usb-ohci', - 'ehci-hcd' - ], - 'network' => [ - '3c501', - '3c503', - '3c505', - '3c507', - '3c509', - '3c515', - '82596', - 'abyss', - 'ac3200', - 'acenic', - 'aironet4500_card', - 'at1700', - 'atp', - 'com20020-pci', - 'cs89x0', - 'de600', - 'de620', - 'r8169', - 'defxx', - 'orinoco_plx', - 'depca', - 'dmfe', - 'e100', - 'e1000', - 'e2100', - 'eepro', - 'eepro100', - 'eexpress', - 'epic100', - 'eth16i', - 'ewrk3', - 'hamachi', - 'hp', - 'hp-plus', - 'hp100', - 'ibmtr', - 'lance', - 'natsemi', - 'ne', - 'ne2k-pci', - 'ni5010', - 'ni52', - 'ni65', - 'nvnet', - 'olympic', - 'pcnet32', - 'plip', - 'rcpci', - 'sb1000', - 'sis900', - 'sk98lin', - 'smc-ultra', - 'smc9194', - 'starfire', - 'tlan', - 'tmspci', - 'tulip', - 'via-rhine', - 'tg3', - 'bcm5700', - 'bcm5820', - 'bcm4400', - 'crc32', - 'wd', - 'winbond-840', - 'yellowfin', - 'ns83820', - 'iph5526', - '3c59x', - '8139too', - 'sundance', - 'dl2k', - 'pegasus', - 'kaweth', - 'usbnet', - 'catc', - 'CDCEther' - ], - 'scsi' => [ - '3w-xxxx', - 'AM53C974', - 'NCR53c406a', - 'a100u2w', - 'advansys', - 'aha1740', - 'atp870u', - 'dc395x_trm', - 'dtc', - 'fdomain', - 'g_NCR5380', - 'in2000', - 'initio', - 'pas16', - 'pci2220i', - 'psi240i', - 'qla1280', - 'qla2x00', - 'qlogicfas', - 'qlogicfc', - 'seagate', - 'sym53c416', - 'u14-34f', - 'ultrastor', - 'eata', - 'eata_pio', - 'eata_dma', - '53c7,8xx', - 'aic7xxx', - 'pci2000', - 'qlogicisp', - 'sym53c8xx', - 'mptscsih', - 'mptbase', - 'DAC960', - 'dpt_i2o', - 'megaraid', - 'aacraid', - 'ataraid', - 'cciss', - 'cpqarray', - 'gdth', - 'i2o_block', - 'qla2200', - 'qla2300', - 'cpqfc', - 'ips', - 'ppa', - 'imm' - ] - }; -my @l = map { /^(\S+)\s*:/ ? $1 : () } `lspcidrake`; - -my %kinds2modules = map { - $_ => [ intersection(\@l, $kinds2all_modules->{$_}) ]; -} keys %$kinds2all_modules; - -if (my @scsi = @{$kinds2modules{scsi}}) { - print "probeall scsi_hostadapter ", join(" ", @scsi), "\n"; -} -if (my @usb = @{$kinds2modules{usb}}) { - print "probeall usb-interface ", join(" ", @usb), "\n"; -} -my $eth = 0; -foreach (@{$kinds2modules{network}}) { - print "alias eth$eth $_\n"; - $eth++; -} - -sub intersection { my (%l, @m); @l{@{shift @_}} = (); foreach (@_) { @m = grep { exists $l{$_} } @$_; %l = (); @l{@m} = () } keys %l } diff --git a/rescue/tree/ka/hostnames b/rescue/tree/ka/hostnames deleted file mode 100644 index e30fac24a..000000000 --- a/rescue/tree/ka/hostnames +++ /dev/null @@ -1,225 +0,0 @@ -icluster1 129.88.96.1 -icluster2 129.88.96.2 -icluster3 129.88.96.3 -icluster4 129.88.96.4 -icluster5 129.88.96.51 -icluster6 129.88.96.6 -icluster7 129.88.96.7 -icluster8 129.88.96.8 -icluster9 129.88.96.9 -icluster10 129.88.96.10 -icluster11 129.88.96.11 -icluster12 129.88.96.12 -icluster13 129.88.96.13 -icluster14 129.88.96.14 -icluster15 129.88.96.15 -icluster16 129.88.96.16 -icluster17 129.88.96.17 -icluster18 129.88.96.18 -icluster19 129.88.96.19 -icluster20 129.88.96.20 -icluster21 129.88.96.21 -icluster22 129.88.96.22 -icluster23 129.88.96.23 -icluster24 129.88.96.24 -icluster25 129.88.96.25 -icluster26 129.88.96.26 -icluster27 129.88.96.27 -icluster28 129.88.96.28 -icluster29 129.88.96.29 -icluster30 129.88.96.30 -icluster31 129.88.96.31 -icluster32 129.88.96.32 -icluster33 129.88.96.33 -icluster34 129.88.96.34 -icluster35 129.88.96.35 -icluster36 129.88.96.36 -icluster37 129.88.96.37 -icluster38 129.88.96.38 -icluster39 129.88.96.39 -icluster40 129.88.96.40 -icluster41 129.88.96.41 -icluster42 129.88.96.42 -icluster43 129.88.96.43 -icluster44 129.88.96.44 -icluster45 129.88.96.45 -icluster46 129.88.96.46 -icluster47 129.88.96.47 -icluster48 129.88.96.48 -icluster49 129.88.96.49 -icluster50 129.88.96.50 -icluster51 129.88.96.51 -icluster52 129.88.96.52 -icluster53 129.88.96.53 -icluster54 129.88.96.54 -icluster55 129.88.96.55 -icluster56 129.88.96.56 -icluster57 129.88.96.57 -icluster58 129.88.96.58 -icluster59 129.88.96.59 -icluster60 129.88.96.60 -icluster61 129.88.96.61 -icluster62 129.88.96.62 -icluster63 129.88.96.63 -icluster64 129.88.96.64 -icluster65 129.88.96.65 -icluster66 129.88.96.66 -icluster67 129.88.96.67 -icluster68 129.88.96.68 -icluster69 129.88.96.69 -icluster70 129.88.96.70 -icluster71 129.88.96.71 -icluster72 129.88.96.72 -icluster73 129.88.96.73 -icluster74 129.88.96.74 -icluster75 129.88.96.75 -icluster76 129.88.96.76 -icluster77 129.88.96.77 -icluster78 129.88.96.78 -icluster79 129.88.96.79 -icluster80 129.88.96.80 -icluster81 129.88.96.81 -icluster82 129.88.96.82 -icluster83 129.88.96.83 -icluster84 129.88.96.84 -icluster85 129.88.96.85 -icluster86 129.88.96.86 -icluster87 129.88.96.87 -icluster88 129.88.96.88 -icluster89 129.88.96.89 -icluster90 129.88.96.90 -icluster91 129.88.96.91 -icluster92 129.88.96.92 -icluster93 129.88.96.93 -icluster94 129.88.96.94 -icluster95 129.88.96.95 -icluster96 129.88.96.96 -icluster97 129.88.96.97 -icluster98 129.88.96.98 -icluster99 129.88.96.99 -icluster100 129.88.96.100 -icluster101 129.88.96.101 -icluster102 129.88.96.102 -icluster103 129.88.96.103 -icluster104 129.88.96.104 -icluster105 129.88.96.105 -icluster106 129.88.96.106 -icluster107 129.88.96.107 -icluster108 129.88.96.108 -icluster109 129.88.96.109 -icluster110 129.88.96.110 -icluster111 129.88.96.111 -icluster112 129.88.96.112 -icluster113 129.88.96.113 -icluster114 129.88.96.114 -icluster115 129.88.96.115 -icluster116 129.88.96.116 -icluster117 129.88.96.117 -icluster118 129.88.96.118 -icluster119 129.88.96.119 -icluster120 129.88.96.120 -icluster121 129.88.96.121 -icluster122 129.88.96.122 -icluster123 129.88.96.123 -icluster124 129.88.96.124 -icluster125 129.88.96.125 -icluster126 129.88.96.126 -icluster127 129.88.96.127 -icluster128 129.88.96.128 -icluster129 129.88.96.129 -icluster130 129.88.96.130 -icluster131 129.88.96.131 -icluster132 129.88.96.132 -icluster133 129.88.96.133 -icluster134 129.88.96.134 -icluster135 129.88.96.135 -icluster136 129.88.96.136 -icluster137 129.88.96.137 -icluster138 129.88.96.138 -icluster139 129.88.96.139 -icluster140 129.88.96.140 -icluster141 129.88.96.141 -icluster142 129.88.96.142 -icluster143 129.88.96.143 -icluster144 129.88.96.144 -icluster145 129.88.96.145 -icluster146 129.88.96.146 -icluster147 129.88.96.147 -icluster148 129.88.96.148 -icluster149 129.88.96.149 -icluster150 129.88.96.150 -icluster151 129.88.96.151 -icluster152 129.88.96.152 -icluster153 129.88.96.153 -icluster154 129.88.96.154 -icluster155 129.88.96.155 -icluster156 129.88.96.156 -icluster157 129.88.96.157 -icluster158 129.88.96.158 -icluster159 129.88.96.159 -icluster160 129.88.96.160 -icluster161 129.88.96.161 -icluster162 129.88.96.162 -icluster163 129.88.96.163 -icluster164 129.88.96.164 -icluster165 129.88.96.165 -icluster166 129.88.96.166 -icluster167 129.88.96.167 -icluster168 129.88.96.168 -icluster169 129.88.96.169 -icluster170 129.88.96.170 -icluster171 129.88.96.171 -icluster172 129.88.96.172 -icluster173 129.88.96.173 -icluster174 129.88.96.174 -icluster175 129.88.96.175 -icluster176 129.88.96.176 -icluster177 129.88.96.177 -icluster178 129.88.96.178 -icluster179 129.88.96.179 -icluster180 129.88.96.180 -icluster181 129.88.96.181 -icluster182 129.88.96.182 -icluster183 129.88.96.183 -icluster184 129.88.96.184 -icluster185 129.88.96.185 -icluster186 129.88.96.186 -icluster187 129.88.96.187 -icluster188 129.88.96.188 -icluster189 129.88.96.189 -icluster190 129.88.96.190 -icluster191 129.88.96.191 -icluster192 129.88.96.192 -icluster193 129.88.96.193 -icluster194 129.88.96.194 -icluster195 129.88.96.195 -icluster196 129.88.96.196 -icluster197 129.88.96.197 -icluster198 129.88.96.198 -icluster199 129.88.96.199 -icluster200 129.88.96.200 -icluster201 129.88.96.201 -icluster202 129.88.96.202 -icluster203 129.88.96.203 -icluster204 129.88.96.204 -icluster205 129.88.96.205 -icluster206 129.88.96.206 -icluster207 129.88.96.207 -icluster208 129.88.96.208 -icluster209 129.88.96.209 -icluster210 129.88.96.210 -icluster211 129.88.96.211 -icluster212 129.88.96.212 -icluster213 129.88.96.213 -icluster214 129.88.96.214 -icluster215 129.88.96.215 -icluster216 129.88.96.216 -icluster217 129.88.96.217 -icluster218 129.88.96.218 -icluster219 129.88.96.219 -icluster220 129.88.96.220 -icluster221 129.88.96.221 -icluster222 129.88.96.222 -icluster223 129.88.96.223 -icluster224 129.88.96.224 -icluster225 129.88.96.225 diff --git a/rescue/tree/ka/install.sh b/rescue/tree/ka/install.sh deleted file mode 100755 index efc8169b8..000000000 --- a/rescue/tree/ka/install.sh +++ /dev/null @@ -1,595 +0,0 @@ -#!/bin/bash - -# this script is run by at startup on the nfs_root system, and runs the ka-deploy client -# it also updates the 'step file' on the tftp server - -# $Revision$ -# $Author$ -# $Date$ -# $Header$ -# $Id$ -# $Log$ -# Revision 1.2 2004/04/02 14:03:41 aginies -# first relsease -# -# Revision 1.6 2001/12/03 16:28:02 sderr -# Completely new install script -# -# Revision 1.5 2001/10/10 13:55:04 sderr -# Updates in documentation -# -# Revision 1.4 2001/06/29 09:31:45 sderr -# *** empty log message *** -# -# Revision 1.3 2001/05/31 08:51:43 sderr -# scripts/doc update to match new command-line syntax -# -# Revision 1.2 2001/05/03 12:34:41 sderr -# Added CVS Keywords to most files. Mostly useless. -# -# $State$ - -# This script is provided as an exmaple and should probably not be run as is - - -unset LANG -unset LANGUAGE - -# needed for some for i in foo* loops -shopt -s nullglob - -bash < /dev/tty2 >/dev/tty2 2>&1 & - -# IDEA : maybe this option could be overriden by a kaopt= in the kernel command line ? -KA_SESSION_BASE="-s kainstall" - -ka_call_num=0 - -inc_ka_session() -{ - (( ka_call_num++ )) - cur_ka_session=$KA_SESSION_BASE$ka_call_num -} - - -# testing ? -- NOT FULLY IMPLEMENTED !!!!!!!!!!!!!!!!!!!! -#DONTWRITE=yes -DONTWRITE=no - -# Let's find out what our IP is -ip=`/sbin/ifconfig | grep -v 127.0.0.1 | grep "inet addr" | sed 's/^.*inet addr:\([^ ]*\) .*$/\1/g' | head -n 1` - -# the file tftpserver should contain the name of the .. tftpserver -server=`cat tftpserver` - - -# reverse a file -tac() -{ - awk '{ x[NR] = $0 } END { for (i = NR; i >= 1; i--) print x[i] }' -} - -# run a command, hide its output and print OK if it suceeds, print FAILED and show the output otherwise. -runcom() -{ - echo -n "$1..." 1>&2 - shift; - out=`"$@" 2>&1` - ret=$? - if [ $ret -eq 0 ]; then - echo $C_S"OK"$C_N 1>&2 - else - echo $C_F"Failed"$C_N 1>&2 - echo $C_W"$out"$C_N 1>&2 - fi - return $ret - -} - -# 5 4 3 2 1 zero ignition -countdown() -{ - t=$1 - while [ "$t" -ne 0 ]; do - echo -n "$t " - sleep 1 - # move the cursor back - # I use now tr instead of sed because busybox's sed adds a non-wanted carriage return - # busybox's tr does not seem to know about the [: :] stuff (?) - echo -n "$t " | tr " 0-9" $'\x08' - (( t-- )) - done - # backspace only moves the cursor back, so at this point there's still a "1" to erase - if [ "$1" -ne 0 ] ;then - echo -n " "$'\x08\x08' - fi -} - - -int_shell() -{ - echo $C_H"starting an interactive shell"$C_N - exec /bin/bash -} - -fail() -{ - echo $* - echo $C_F"--- The installation program FAILED ---"$C_N - echo "Check your configuration -- try to read previous error messages" - echo "This machine is going to reboot (Ctrl-S to block it) (Ctrl-C for an interactive shell)" - trap int_shell SIGINT - countdown 30 - do_reboot -} - -do_reboot() -{ - reboot - sleep 1234567 # do not continue the install script (/sbin/reboot does not block) -} - - - -# ahem this LILO function should be fixed someday -# right now this function assumes there is a properly configured lilo on the duplicated linux system -do_lilo() -{ - - -chroot /disk << EOF -lilo -EOF - - -} - - -run_chroot_command() -{ - - chroot /disk $* - -} - - -log() -{ - echo $* 1>&2 - echo $* >> /tmp/ginstlog -} - -# version for the standard tftp client -std_tftp_put_file() -{ - remotef=$2 - localf=$1 - err=`echo put $localf $remotef | tftp $server 2>&1` - err=`echo $err | grep Sent` - if [ -z "$err" ]; then - log tftp error: could not get/put file - return 1 - fi - return 0 -} - -# version for the tftp client built in busybox -busybox_tftp_put_file() -{ - remotef=$2 - localf=$1 - err=`tftp -p -l $localf -r $remotef $server 2>&1` - if [ $? -ne 0 ]; then - log tftp error: could not get/put file $err - return 1 - fi - return 0 -} - - -busybox_tftp_get_file() -{ - remotef=$1 - localf=$2 - err=`tftp -g -l $localf -r $remotef $server 2>&1` - if [ $? -ne 0 ]; then - log tftp error: could not get/put file $err - return 1 - fi - return 0 -} - - -std_tftp_get_file() -{ - remotef=$1 - localf=$2 - err=`echo get $remotef $localf | tftp $server 2>&1` - err=`echo $err | grep Received` - if [ -z "$err" ]; then - echo tftp error: could not get/put file - return 1 - fi - return 0 -} - -tftp_get_file() -{ - busybox_tftp_get_file "$@" -} - -tftp_put_file() -{ - busybox_tftp_put_file "$@" -} - -# write a string ($2) in a remote file ($1) -tftp_put_in() -{ - echo "$2" > $temp - err=`echo put $temp "$1" | tftp $server 2>&1` - rm -f $temp - err=`echo $err | grep Sent` - if [ -z "$err" ]; then - log tftp error: could not get/put file - return 1 - fi - return 0 -} - -get_var_bis() -{ - while read a; do - echo "$a" | grep -s -q "^ *#.*" - if [ $? -eq 0 ]; then - continue - fi - val=`echo "$a" | sed 's/[^"]*"\(.*[^\\]\)".*/\1/'` - var=`echo "$a" | sed 's/[^"]*".*[^\\]" *\$\([^ ]*\)/\1/'` - if [ "$var" = "$1" ]; then - echo $val - return 0 - fi - done - return 1 -} - -# fetch variable $2 from file $1 -get_var() -{ - (cat $1; echo) | get_var_bis $2 -} - -# find the current step in the kernel command line -get_step() -{ - step=install -# step=`cat /proc/cmdline | sed 's/.*kastep=\([^ ]*\).*/\1/'` - if [ "$step" ]; then - echo $step > /tmp/step - return 0 - fi - return 1 -} - - -# write a new file on the tftp server -# this file is a pxelinux config file -# do this by getting the 'template file' and adding a DEFAULT at the beginning -set_step() -{ - step=$1 - - - runcom "Getting template file" tftp_get_file "ka/pxelinux.cfg/template" /tmp/template || return 1 - - echo DEFAULT $step > /tmp/newcfg - cat /tmp/template >> /tmp/newcfg - - runcom "Sending back new pxelinux config file" tftp_put_file /tmp/newcfg "ka/pxelinux.cfg/IP/$ip" || return 1 - - return 0 -} - - - -# the mount_partition calls must be done in the same shell (NOT a subshell) because the global variable below has to be updated -# idea : maybe use a file instead of this variable (and since the tac function now exists, why not ?) -mounted_fs="" - -# mount a partition UNDER /disk !!! (/disk is prepended to $2) -mount_partition() -{ - dev=$1 - point=$2 - - echo -n "Mounting $C_H$1$C_N as /disk$C_H$point$C_N" - mkdir -p /disk$point - test -d /disk$point || return 1 - runcom "..." mount $dev /disk/$point || return 1 - mounted_fs="$dev $mounted_fs" - return 0 -} - -# umount all mounted partitions under /disk, in the reverse order -umount_partitions() -{ - for dev in $mounted_fs; do - retries=0 - while ! runcom "Umounting $dev" umount $dev ; do - sleep 3 - (( retries++ )) - if [ $retries -gt 3 ]; then - echo Failed too many times. giving up. - break - fi - done - done -} - - -# recreate excluded directories -# read stdin like this : u=rwx g=rwx o=rwx uid gid filename -recreate_dirs() -{ - while read line; do - declare -a fields - fields=( $line ) - file=/disk/${fields[5]} -# echo $file -# note : it is possible that the directory exists already, if it was a mount point -# we need to set the permissions/users anyway - mkdir -p $file -# echo chmod ${fields[0]},${fields[1]},${fields[2]} $file - chmod ${fields[0]},${fields[1]},${fields[2]} $file - # argl !! chmod o+t does not work with busybox's chmod ! - # we have to handle it alone - if echo ${fields[2]} | grep -q t; then - chmod +t $file - fi - chown ${fields[3]}.${fields[4]} $file - done -} - -make_partitions() -{ - # we must be in the partfiles directory - for file in partition_tab*; do - drive=`echo $file | sed 's/partition_tab//'` - cat $file | runcom "Writing partition table for $drive using sfdisk" /sbin/sfdisk /dev/$drive -uS --force || fail "error with sfdisk" - done - - for file in fdisk_commands*; do - drive=`echo $file | sed 's/fdisk_commands//'` - cat $file | runcom "Writing partition table for $drive using fdisk" fdisk /dev/$drive || fail "error with fdisk" - done - -} -checkDevEntries() -{ - if ! test -r /disk/dev/hda ; then - (cd /dev && tar c *) | (cd /disk/dev && tar x) - fi -} - -write_MBRs() -{ -# we must be in the partfiles directory also - for file in MBR*; do - drive=`echo $file | sed 's/MBR//'` - runcom "Writing new MBR for $drive" dd if=$file of=/dev/$drive bs=1 count=446 - done -} - - -# Colors -# Success -C_S=$'\033[1;32m' -# Failure -C_F=$'\033[1;31m' -# Warning -C_W=$'\033[1;33m' -# Normal -C_N=$'\033[0;39m' -# Hilight -C_H=$'\033[1;39m' - - -# Clear screen, fancy startup message. -echo $'\033'[2J$'\033'[H -echo "------| $C_H"Ka"$C_N |---- Install starting..." - -temp=/tmp/ginst - -# activate dma ? -- obsolete stuff I think -# runcom "Setting HD optimizations" hdparm -c1 -d1 -K1 $HD - -delay=0 - -if ! runcom "Getting step name" get_step; then - echo "Error: Could not get current step " - fail -else - step=`cat /tmp/step` -fi - -echo Next Server is `cat /ka/tftpserver` - -echo Current step for $ip is : \"$C_H$step$C_N\" - -echo -n "Finding install type : " -case $step in - shell) - echo No install, but interactive shell - ## drop the user to an interactive shell - exec /bin/bash - ;; - install) - install_type=install - nextstep=ready - echo Install Linux - ;; - test_install) - install_type=test_install - nextstep=ready - echo TEST TEST TEST - countdown 10 - echo Install Linux TEST - ;; -esac - - -if [ -z "$install_type" ]; then - echo FATAL : Could not recognize this step name - echo "Aborting... " - fail -fi - - - -# receive the partition table, fstab, etc from the source node -mkdir /tmp/partfiles -inc_ka_session -echo Current session is $cur_ka_session -runcom "Receiving partitions information" /ka/ka-d-client -w $cur_ka_session -e "( cd /tmp/partfiles && tar xvf - )" || fail - - - - -cd /tmp/partfiles -make_partitions - - -test -f /tmp/partfiles/streams || fail "Missing streams file" -first_stream=`cat /tmp/partfiles/streams | head -n 1` - -if [ "$first_stream" = linux ]; then - rcv_linux=yes -else - rcv_linux=no -fi - - - -#if we must receive a linux system, we need to format and mount the partitions -if [ $rcv_linux = yes ]; then - # format partitions - format_partitions() - { - while read line; do - declare -a fields - fields=( $line ) - - case ${fields[2]} in - - ext3 ) - runcom "Formatting ${fields[0]} as ext3" mke2fs -j ${fields[0]} || fail - ;; - ext2 ) - runcom "Formatting ${fields[0]} as ext2" mke2fs ${fields[0]} || fail - ;; - swap ) - runcom "Formatting ${fields[0]} as swap" mkswap ${fields[0]} || fail - ;; - esac - done - } - - format_partitions < /tmp/partfiles/pfstab - - - # mount the partitions - - mount_partitions() - { - while read line; do - declare -a fields - fields=( $line ) - - case ${fields[2]} in - ext3 ) - insmod /modules/jbd.o - insmod /modules/ext3.o - mount_partition ${fields[0]} ${fields[1]} || fail - ;; - ext2 ) - mount_partition ${fields[0]} ${fields[1]} || fail - ;; - esac - done - } - - # NOTE - # I replaced cat truc | mount_partitions by mount_partitions < truc - # because in the former case mount_partitions runs in a subshell and the $mounted_fs value is lost - mount_partitions < /tmp/partfiles/pfstab - - echo ++++++++++++++++++++++++++ - mount - echo ++++++++++++++++++++++++++ - - delay=0 -else - delay=10 -fi - -if [ $DONTWRITE != yes ]; then - for stream in `cat /tmp/partfiles/streams`; do - if [ "$stream" = "linux" ]; then - # partitions already formatted/mounted, just copy now - # untar data from the master 'on the fly' - echo -n "Linux copy is about to start " - countdown $delay - echo - inc_ka_session - /ka/ka-d-client -w $cur_ka_session -e "(cd /disk; tar --extract --read-full-records --same-permissions --numeric-owner --sparse --file - )" || fail - echo Linux copy done. - echo Creating excluded directories - cat /tmp/partfiles/excluded | recreate_dirs - echo Setting up networking - /ka/setup_network.sh - delay=10 - else - # maybe receive some raw partition dumps - echo Raw copy of $stream is about to start - countdown $delay - inc_ka_session - /ka/ka-d-client -w $cur_ka_session -e "dd of=$stream bs=65536" || fail - delay=10 - fi - done - - cd /tmp/partfiles - write_MBRs - - - if test -f /tmp/partfiles/command; then - checkDevEntries - command_to_run=`cat /tmp/partfiles/command` - runcom "Running $command_to_run" run_chroot_command "$command_to_run" - fi - -else - echo " I would run ka-deploy(s) and then lilo/mbr " - sleep 1 -fi - - -runcom "Syncing disks" sync - -umount_partitions - -# maybe there is a last dummy ka-deploy for synchronization -if test -f /tmp/partfiles/delay; then - sleep 1 - inc_ka_session - runcom "Waiting source node signal to end installation" /ka/ka-d-client -w $cur_ka_session -e "cat" || fail -fi - - -# Update the step file on the tftp server -#runcom 'Sending back new $step' set_step $nextstep || fail - -echo -n Rebooting... -countdown 3 -do_reboot diff --git a/rescue/tree/ka/ka-d-client b/rescue/tree/ka/ka-d-client deleted file mode 100755 index c1dd2c610..000000000 Binary files a/rescue/tree/ka/ka-d-client and /dev/null differ diff --git a/rescue/tree/ka/make_initrd b/rescue/tree/ka/make_initrd deleted file mode 100755 index d6f15a951..000000000 --- a/rescue/tree/ka/make_initrd +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/bash -echo Looking for default kernel -CHROOT=/mnt/disk -IMG=`cat $CHROOT/etc/lilo.conf | grep default | cut -d "=" -f 2` -KERN="x" -INITRD="" -LABEL="x" - -modprobe loop - -for i in `cat $CHROOT/etc/lilo.conf`; do - - if echo $i | grep image >/dev/null; then - KERN=$CHROOT`echo $i | cut -d "=" -f 2` - INITRD="" - LABEL="x" - - fi - - if echo $i | grep label >/dev/null; then - LABEL=`echo $i | cut -d "=" -f 2` - fi - - if echo $i | grep initrd >/dev/null; then - INITRD=`echo $i | cut -d "=" -f 2` - fi - - if [ ${LABEL} == ${IMG} ] && [ ! -z ${INITRD} ]; then - echo "Kernel name is $KERN" - echo "Initrd name is $INITRD" - KERN_VERSION=`strings $KERN | grep "^2\.[2.4]"| cut -d " " -f 1` - if [ -z $KERN_VERSION ]; then - echo "No kernel version found !" - read - fi - - chroot $CHROOT mount /proc - chroot $CHROOT MAKEDEV loop - chroot $CHROOT MAKEDEV fd - chroot $CHROOT MAKEDEV hd - chroot $CHROOT MAKEDEV sd - chroot $CHROOT MAKEDEV md - chroot $CHROOT MAKEDEV zero - chroot $CHROOT mkinitrd -f $INITRD $KERN_VERSION - chroot $CHROOT umount /proc - - exit - fi -done diff --git a/rescue/tree/ka/setup_network.sh b/rescue/tree/ka/setup_network.sh deleted file mode 100755 index 718e065f9..000000000 --- a/rescue/tree/ka/setup_network.sh +++ /dev/null @@ -1,65 +0,0 @@ -#!/bin/bash - -# this script setups the network on the cloned system -# puts a correct hostname -# changes the IP if static -- for only ONE device (dunno what will happen with multiple NICs) -# needs the file /ka/hostnames - - -curdir=`pwd` - - -# current hostname has been set up in rc.sysinit -ip=`hostname | tr _ .` - -echo My IP is $ip -cd /ka - -# the sed command will remove unwanted spaces -if test -f hostnames ; then - myname=`cat hostnames | sed -e 's/ / /g' -e 's/ *$//' | grep " $ip\$" | cut -d ' ' -f 1` - nbfound=`echo "$myname" | wc -l` -fi - -if [ $nbfound -ne 1 ] || [ -z "$myname" ]; then - # try DNS - echo IP not found in /ka/hostnames, Trying DNS - myname=`host $ip | grep "domain name" | cut -d " " -f 5` -# myname=`nslookup $ip | grep ^Name: | tail -n +2 | head -n 1 | sed 's/Name: *//'` -fi - -if [ -z "$myname" ]; then - myname=`hostname` - echo WARNING:HOSTNAME NOT FOUND -fi - -echo My hostname is $myname - -# change hostname in the network file -old=/disk/etc/sysconfig/network.beforeka -new=/disk/etc/sysconfig/network - -rm -f "$old" -mv "$new" "$old" -cat "$old" | grep -v ^HOSTNAME= > "$new" -echo "HOSTNAME=$myname" >> "$new" - -# assume first NIC is the gatewaydev (right ? wrong ?) -firstnic=`grep ^GATEWAYDEV "$new" | cut -d = -f 2 | tr -d \"` -echo GATEWAYDEV=$firstnic - -# see if IP has to be written -proto=`grep ^BOOTPROTO /disk/etc/sysconfig/network-scripts/ifcfg-$firstnic | cut -d = -f 2 | tr -d \"` -echo PROTO=$proto -if [ $proto != dhcp ]; then - # proto is static, write the new IP in the config file - old=/disk/etc/sysconfig/network-scripts/ifcfg-$firstnic.beforeka - new=/disk/etc/sysconfig/network-scripts/ifcfg-$firstnic - - rm -f "$old" - mv "$new" "$old" - cat "$old" | grep -v ^IPADDR= > "$new" - echo IPADDR=$ip >> "$new" -fi - -cd $curdir diff --git a/rescue/tree/ka/tftpserver b/rescue/tree/ka/tftpserver deleted file mode 100644 index deed6748f..000000000 --- a/rescue/tree/ka/tftpserver +++ /dev/null @@ -1 +0,0 @@ -192.168.200.10 -- cgit v1.2.1