From f833b05a6fcb54bf64bacaedb4c3ce3c698c2ef5 Mon Sep 17 00:00:00 2001 From: Pablo Saratxaga Date: Tue, 3 Sep 2002 05:13:58 +0000 Subject: updated Chinese file --- perl-install/share/po/zh_CN.po | 5115 +++++++++++++++++++++------------------- 1 file changed, 2637 insertions(+), 2478 deletions(-) (limited to 'perl-install') diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po index d9520eaf8..5c3d2128f 100644 --- a/perl-install/share/po/zh_CN.po +++ b/perl-install/share/po/zh_CN.po @@ -1,22 +1,20 @@ # drakbootdisk messages in Simplified Chinese # Copyright (C) 2000 Free Software Foundation, Inc. -# -# Jesse Kuang , 2002 # Danny Zeng , 2000, 2002 -# -# Last translator # Jesse Kuang , 2002 # +# msgid "" msgstr "" "Project-Id-Version: DrakX 9.0\n" -"POT-Creation-Date: 2002-08-21 15:44+0200\n" -"PO-Revision-Date: 2002-08-15 22:30+0800\n" +"POT-Creation-Date: 2002-09-02 20:14+0200\n" +"PO-Revision-Date: 2002-09-03 11:55+0800\n" "Last-Translator: Danny Zeng \n" -"Language-Team: Chinese \n" +"Language-Team: Simplified Chinese \n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=gb2312\n" "Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 0.9.5\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" @@ -54,19 +52,19 @@ msgstr "32 MB" msgid "64 MB or more" msgstr "64 MB 或以上" -#: ../../Xconfig/card.pm_.c:201 +#: ../../Xconfig/card.pm_.c:203 msgid "Choose a X server" msgstr "请选择一种 X 服务器" -#: ../../Xconfig/card.pm_.c:201 +#: ../../Xconfig/card.pm_.c:203 msgid "X server" msgstr "X 服务器" -#: ../../Xconfig/card.pm_.c:228 +#: ../../Xconfig/card.pm_.c:230 msgid "Multi-head configuration" msgstr "多显示器配置" -#: ../../Xconfig/card.pm_.c:229 +#: ../../Xconfig/card.pm_.c:231 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" @@ -74,27 +72,27 @@ msgstr "" "您的系统支持多显示器.\n" "是否进行配置?" -#: ../../Xconfig/card.pm_.c:284 +#: ../../Xconfig/card.pm_.c:286 msgid "Select the memory size of your graphics card" msgstr "请选择您显示卡上内存的大小" -#: ../../Xconfig/card.pm_.c:345 +#: ../../Xconfig/card.pm_.c:347 msgid "XFree configuration" msgstr "XFree 配置" -#: ../../Xconfig/card.pm_.c:347 +#: ../../Xconfig/card.pm_.c:349 msgid "Which configuration of XFree do you want to have?" msgstr "您希望拥有哪个 XFree 配置?" -#: ../../Xconfig/card.pm_.c:379 +#: ../../Xconfig/card.pm_.c:381 msgid "Configure all heads independently" msgstr "配置所有显示器" -#: ../../Xconfig/card.pm_.c:380 +#: ../../Xconfig/card.pm_.c:382 msgid "Use Xinerama extension" msgstr "使用 Xinerama 扩展" -#: ../../Xconfig/card.pm_.c:384 +#: ../../Xconfig/card.pm_.c:386 #, c-format msgid "Configure only card \"%s\"%s" msgstr "只配置 \"%s\"%s 卡" @@ -105,13 +103,13 @@ msgstr "只 msgid "XFree %s" msgstr "XFree %s" -#: ../../Xconfig/card.pm_.c:409 ../../Xconfig/card.pm_.c:435 +#: ../../Xconfig/card.pm_.c:410 ../../Xconfig/card.pm_.c:436 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s 带有硬件 3D 加速的支持" -#: ../../Xconfig/card.pm_.c:412 +#: ../../Xconfig/card.pm_.c:413 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" @@ -120,17 +118,17 @@ msgstr "" "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持.\n" "XFree %s 支持您的显示卡, 它能提供更好的 2D 支持." -#: ../../Xconfig/card.pm_.c:414 ../../Xconfig/card.pm_.c:437 +#: ../../Xconfig/card.pm_.c:415 ../../Xconfig/card.pm_.c:438 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持." -#: ../../Xconfig/card.pm_.c:422 ../../Xconfig/card.pm_.c:443 +#: ../../Xconfig/card.pm_.c:423 ../../Xconfig/card.pm_.c:444 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s 带有试验阶段的3D硬件加速支持" -#: ../../Xconfig/card.pm_.c:425 +#: ../../Xconfig/card.pm_.c:426 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" @@ -141,7 +139,7 @@ msgstr "" "注意这是试验阶段的支持, 它可能会使您的电脑失去反应\n" "XFree %s 支持您的显示卡, 它能提供更好的 2D 支持." -#: ../../Xconfig/card.pm_.c:428 ../../Xconfig/card.pm_.c:445 +#: ../../Xconfig/card.pm_.c:429 ../../Xconfig/card.pm_.c:446 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" @@ -150,52 +148,53 @@ msgstr "" "使用 XFree %s, 您的显示卡可以得到 3D 硬件加速支持.\n" "注意这是试验阶段的支持, 它可能会使您的电脑失去反应." -#: ../../Xconfig/card.pm_.c:451 +#: ../../Xconfig/card.pm_.c:452 msgid "Xpmac (installation display driver)" msgstr "Xpmac (安装显卡驱动)" -#: ../../Xconfig/main.pm_.c:78 ../../Xconfig/main.pm_.c:79 -#: ../../Xconfig/monitor.pm_.c:94 ../../any.pm_.c:974 +#: ../../Xconfig/main.pm_.c:76 ../../Xconfig/main.pm_.c:77 +#: ../../Xconfig/monitor.pm_.c:96 ../../any.pm_.c:977 msgid "Custom" msgstr "定制" -#: ../../Xconfig/main.pm_.c:104 +#: ../../Xconfig/main.pm_.c:102 msgid "Graphic Card" msgstr "图形卡" -#: ../../Xconfig/main.pm_.c:107 ../../Xconfig/monitor.pm_.c:91 +#: ../../Xconfig/main.pm_.c:105 ../../Xconfig/monitor.pm_.c:93 msgid "Monitor" msgstr "显示器" -#: ../../Xconfig/main.pm_.c:110 ../../Xconfig/resolution_and_depth.pm_.c:209 +#: ../../Xconfig/main.pm_.c:108 ../../Xconfig/resolution_and_depth.pm_.c:209 msgid "Resolution" msgstr "屏幕分辨率" -#: ../../Xconfig/main.pm_.c:114 +#: ../../Xconfig/main.pm_.c:113 msgid "Test" msgstr "测试" -#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:59 -#: ../../diskdrake/interactive.pm_.c:377 ../../diskdrake/removable.pm_.c:25 +#: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:63 +#: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "选项" #: ../../Xconfig/main.pm_.c:121 ../../Xconfig/resolution_and_depth.pm_.c:268 -#: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:281 +#: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:275 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 -#: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:104 +#: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 -#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:156 -#: ../../my_gtk.pm_.c:284 ../../my_gtk.pm_.c:307 -#: ../../standalone/drakbackup_.c:3324 ../../standalone/drakbackup_.c:3419 -#: ../../standalone/drakbackup_.c:3438 +#: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:159 +#: ../../my_gtk.pm_.c:287 ../../my_gtk.pm_.c:310 +#: ../../standalone/drakbackup_.c:3972 ../../standalone/drakbackup_.c:4067 +#: ../../standalone/drakbackup_.c:4086 msgid "Ok" msgstr "确定" #: ../../Xconfig/main.pm_.c:121 ../../diskdrake/dav.pm_.c:24 -#: ../../printerdrake.pm_.c:2933 ../../standalone/logdrake_.c:224 +#: ../../harddrake/ui.pm_.c:98 ../../printerdrake.pm_.c:3155 +#: ../../standalone/logdrake_.c:224 msgid "Quit" msgstr "结束" @@ -212,27 +211,27 @@ msgstr "" "\n" "%s" -#: ../../Xconfig/monitor.pm_.c:91 +#: ../../Xconfig/monitor.pm_.c:93 msgid "Choose a monitor" msgstr "请选择一种显示器" -#: ../../Xconfig/monitor.pm_.c:95 +#: ../../Xconfig/monitor.pm_.c:97 msgid "Plug'n Play" msgstr "即插即用" -#: ../../Xconfig/monitor.pm_.c:96 ../../mouse.pm_.c:45 +#: ../../Xconfig/monitor.pm_.c:98 ../../mouse.pm_.c:46 msgid "Generic" msgstr "普通" -#: ../../Xconfig/monitor.pm_.c:97 ../../harddrake/ui.pm_.c:36 +#: ../../Xconfig/monitor.pm_.c:99 ../../harddrake/ui.pm_.c:37 msgid "Vendor" msgstr "厂家" -#: ../../Xconfig/monitor.pm_.c:107 +#: ../../Xconfig/monitor.pm_.c:109 msgid "Plug'n Play probing failed. Please choose a precise monitor" -msgstr "" +msgstr "即插即用检测失败. 请明确选择一个显示器" -#: ../../Xconfig/monitor.pm_.c:112 +#: ../../Xconfig/monitor.pm_.c:114 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" @@ -253,11 +252,11 @@ msgstr "" "不恰当的设置可能会损害您的显示器!\n" "所以没把握时, 您可以选择保守的设定." -#: ../../Xconfig/monitor.pm_.c:119 +#: ../../Xconfig/monitor.pm_.c:121 msgid "Horizontal refresh rate" msgstr "水平更新频率" -#: ../../Xconfig/monitor.pm_.c:120 +#: ../../Xconfig/monitor.pm_.c:122 msgid "Vertical refresh rate" msgstr "垂直更新频率" @@ -294,36 +293,40 @@ msgstr "选取 msgid "Graphics card: %s" msgstr "显示卡: %s" -#: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1015 -#: ../../bootlook.pm_.c:334 ../../diskdrake/smbnfs_gtk.pm_.c:87 -#: ../../install_steps_gtk.pm_.c:412 ../../install_steps_gtk.pm_.c:470 -#: ../../install_steps_interactive.pm_.c:576 ../../interactive.pm_.c:142 -#: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:105 +#: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1018 +#: ../../bootlook.pm_.c:338 ../../diskdrake/smbnfs_gtk.pm_.c:87 +#: ../../install_steps_gtk.pm_.c:406 ../../install_steps_gtk.pm_.c:464 +#: ../../install_steps_interactive.pm_.c:560 ../../interactive.pm_.c:142 +#: ../../interactive.pm_.c:354 ../../interactive/http.pm_.c:105 #: ../../interactive/newt.pm_.c:174 ../../interactive/stdio.pm_.c:39 -#: ../../interactive/stdio.pm_.c:143 ../../my_gtk.pm_.c:155 -#: ../../my_gtk.pm_.c:159 ../../my_gtk.pm_.c:284 -#: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:1990 -#: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3278 -#: ../../standalone/drakbackup_.c:3311 ../../standalone/drakbackup_.c:3337 -#: ../../standalone/drakbackup_.c:3364 ../../standalone/drakbackup_.c:3391 -#: ../../standalone/drakbackup_.c:3451 ../../standalone/drakbackup_.c:3478 -#: ../../standalone/drakbackup_.c:3504 ../../standalone/drakconnect_.c:115 -#: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 -#: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 -#: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfloppy_.c:383 -#: ../../standalone/drakfont_.c:970 ../../standalone/drakgw_.c:598 -#: ../../standalone/logdrake_.c:224 ../../standalone/logdrake_.c:528 -#: ../../standalone/tinyfirewall_.c:64 +#: ../../interactive/stdio.pm_.c:143 ../../my_gtk.pm_.c:158 +#: ../../my_gtk.pm_.c:162 ../../my_gtk.pm_.c:287 +#: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:2124 +#: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3926 +#: ../../standalone/drakbackup_.c:3959 ../../standalone/drakbackup_.c:3985 +#: ../../standalone/drakbackup_.c:4012 ../../standalone/drakbackup_.c:4039 +#: ../../standalone/drakbackup_.c:4099 ../../standalone/drakbackup_.c:4126 +#: ../../standalone/drakbackup_.c:4156 ../../standalone/drakbackup_.c:4182 +#: ../../standalone/drakconnect_.c:115 ../../standalone/drakconnect_.c:147 +#: ../../standalone/drakconnect_.c:289 ../../standalone/drakconnect_.c:537 +#: ../../standalone/drakconnect_.c:679 ../../standalone/drakfloppy_.c:234 +#: ../../standalone/drakfloppy_.c:383 ../../standalone/drakfont_.c:970 +#: ../../standalone/drakgw_.c:536 ../../standalone/logdrake_.c:224 +#: ../../standalone/logdrake_.c:526 msgid "Cancel" msgstr "取消" -#: ../../Xconfig/test.pm_.c:26 +#: ../../Xconfig/test.pm_.c:30 +msgid "Test of the configuration" +msgstr "测试设定值" + +#: ../../Xconfig/test.pm_.c:31 msgid "Do you want to test the configuration?" msgstr "您想要测试您的设定值吗 ?" -#: ../../Xconfig/test.pm_.c:26 -msgid "Test of the configuration" -msgstr "测试设定值" +#: ../../Xconfig/test.pm_.c:31 +msgid "Warning: testing this graphic card may freeze your computer" +msgstr "警告: 测试这个图形卡可能会锁定您的电脑" #: ../../Xconfig/various.pm_.c:29 #, c-format @@ -465,26 +468,22 @@ msgstr " msgid "Yaboot" msgstr "根分区" -#: ../../any.pm_.c:158 ../../any.pm_.c:190 +#: ../../any.pm_.c:159 ../../any.pm_.c:190 msgid "Bootloader main options" msgstr "开机引导程序的主要选项" -#: ../../any.pm_.c:159 ../../any.pm_.c:191 +#: ../../any.pm_.c:160 ../../any.pm_.c:191 msgid "Bootloader to use" msgstr "开机引导程序" -#: ../../any.pm_.c:161 +#: ../../any.pm_.c:162 msgid "Bootloader installation" msgstr "开机引导程序安装" -#: ../../any.pm_.c:163 ../../any.pm_.c:193 +#: ../../any.pm_.c:164 ../../any.pm_.c:193 msgid "Boot device" msgstr "开机引导设备" -#: ../../any.pm_.c:164 -msgid "LBA (doesn't work on old BIOSes)" -msgstr "LBA (在老旧的 BIOS 上不能工作)" - #: ../../any.pm_.c:165 msgid "Compact" msgstr "紧凑" @@ -501,16 +500,17 @@ msgstr " msgid "Delay before booting default image" msgstr "开机等候时间" -#: ../../any.pm_.c:170 ../../any.pm_.c:786 +#: ../../any.pm_.c:170 ../../any.pm_.c:788 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 -#: ../../install_steps_interactive.pm_.c:1111 ../../network/modem.pm_.c:48 -#: ../../printerdrake.pm_.c:743 ../../printerdrake.pm_.c:858 -#: ../../standalone/drakconnect_.c:624 ../../standalone/drakconnect_.c:649 +#: ../../install_steps_interactive.pm_.c:1096 ../../network/modem.pm_.c:48 +#: ../../printerdrake.pm_.c:850 ../../printerdrake.pm_.c:965 +#: ../../standalone/drakbackup_.c:3528 ../../standalone/drakconnect_.c:624 +#: ../../standalone/drakconnect_.c:649 msgid "Password" msgstr "口令" -#: ../../any.pm_.c:171 ../../any.pm_.c:787 -#: ../../install_steps_interactive.pm_.c:1112 +#: ../../any.pm_.c:171 ../../any.pm_.c:789 +#: ../../install_steps_interactive.pm_.c:1097 msgid "Password (again)" msgstr "口令 (再一次)" @@ -544,14 +544,14 @@ msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "没有口令不能使用 ``限定参数选项''" -#: ../../any.pm_.c:184 ../../any.pm_.c:762 -#: ../../diskdrake/interactive.pm_.c:1180 -#: ../../install_steps_interactive.pm_.c:1106 +#: ../../any.pm_.c:184 ../../any.pm_.c:764 +#: ../../diskdrake/interactive.pm_.c:1191 +#: ../../install_steps_interactive.pm_.c:1091 msgid "Please try again" msgstr "请再试一次" -#: ../../any.pm_.c:184 ../../any.pm_.c:762 -#: ../../install_steps_interactive.pm_.c:1106 +#: ../../any.pm_.c:184 ../../any.pm_.c:764 +#: ../../install_steps_interactive.pm_.c:1091 msgid "The passwords do not match" msgstr "两次口令不符" @@ -601,16 +601,16 @@ msgstr "" "现在有下列条目.\n" "您可以增加或是更改已存在的条目" -#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1483 -#: ../../standalone/drakbackup_.c:1596 ../../standalone/drakfont_.c:1011 +#: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1558 +#: ../../standalone/drakbackup_.c:1671 ../../standalone/drakfont_.c:1011 #: ../../standalone/drakfont_.c:1054 msgid "Add" msgstr "增加" -#: ../../any.pm_.c:257 ../../any.pm_.c:774 ../../diskdrake/dav.pm_.c:60 +#: ../../any.pm_.c:257 ../../any.pm_.c:776 ../../diskdrake/dav.pm_.c:64 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 -#: ../../standalone/drakbackup_.c:2696 +#: ../../printerdrake.pm_.c:3155 ../../standalone/drakbackup_.c:2772 msgid "Done" msgstr "完成" @@ -622,7 +622,7 @@ msgstr " msgid "Which type of entry do you want to add?" msgstr "要增加的条目是什么类型?" -#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1630 +#: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1705 msgid "Linux" msgstr "Linux" @@ -716,13 +716,13 @@ msgstr " msgid "Do you have any %s interfaces?" msgstr "您还有其他 %s 接口吗 ?" -#: ../../any.pm_.c:660 ../../any.pm_.c:821 ../../interactive.pm_.c:132 -#: ../../my_gtk.pm_.c:283 +#: ../../any.pm_.c:660 ../../any.pm_.c:823 ../../interactive.pm_.c:132 +#: ../../my_gtk.pm_.c:286 msgid "No" msgstr "否" -#: ../../any.pm_.c:660 ../../any.pm_.c:820 ../../interactive.pm_.c:132 -#: ../../my_gtk.pm_.c:283 +#: ../../any.pm_.c:660 ../../any.pm_.c:822 ../../interactive.pm_.c:132 +#: ../../my_gtk.pm_.c:286 msgid "Yes" msgstr "是" @@ -821,37 +821,45 @@ msgstr " msgid "access to administrative files" msgstr "允许访问系统配置文件" -#: ../../any.pm_.c:758 +#: ../../any.pm_.c:754 +msgid "access to network tools" +msgstr "允许使用网络工具" + +#: ../../any.pm_.c:755 +msgid "access to compilation tools" +msgstr "允许使用编译工具" + +#: ../../any.pm_.c:760 #, c-format msgid "(already added %s)" msgstr "(已经增加了 %s)" -#: ../../any.pm_.c:763 +#: ../../any.pm_.c:765 msgid "This password is too simple" msgstr "口令太简单" -#: ../../any.pm_.c:764 +#: ../../any.pm_.c:766 msgid "Please give a user name" msgstr "请给出有关用户名" -#: ../../any.pm_.c:765 +#: ../../any.pm_.c:767 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "用户名只能有小写字母、数字，`-' 和 `_'" -#: ../../any.pm_.c:766 +#: ../../any.pm_.c:768 msgid "The user name is too long" msgstr "该用户名太长" -#: ../../any.pm_.c:767 +#: ../../any.pm_.c:769 msgid "This user name is already added" msgstr "该用户名已经存在" -#: ../../any.pm_.c:771 +#: ../../any.pm_.c:773 msgid "Add user" msgstr "增加新用户" -#: ../../any.pm_.c:772 +#: ../../any.pm_.c:774 #, c-format msgid "" "Enter a user\n" @@ -860,32 +868,32 @@ msgstr "" "请输入一个用户名\n" "%s" -#: ../../any.pm_.c:773 +#: ../../any.pm_.c:775 msgid "Accept user" msgstr "接受该用户" -#: ../../any.pm_.c:784 +#: ../../any.pm_.c:786 msgid "Real name" msgstr "用户真实姓名" -#: ../../any.pm_.c:785 ../../printerdrake.pm_.c:742 -#: ../../printerdrake.pm_.c:857 +#: ../../any.pm_.c:787 ../../printerdrake.pm_.c:849 +#: ../../printerdrake.pm_.c:964 msgid "User name" msgstr "用户登录名" -#: ../../any.pm_.c:788 +#: ../../any.pm_.c:790 msgid "Shell" msgstr "Shell" -#: ../../any.pm_.c:790 +#: ../../any.pm_.c:792 msgid "Icon" msgstr "图标" -#: ../../any.pm_.c:817 +#: ../../any.pm_.c:819 msgid "Autologin" msgstr "自动登录" -#: ../../any.pm_.c:818 +#: ../../any.pm_.c:820 msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" @@ -893,54 +901,54 @@ msgstr "" "您可以在这里设定开机时自动以某用户的身份登入系统.\n" "您希望使用这个特性吗 ?" -#: ../../any.pm_.c:822 +#: ../../any.pm_.c:824 msgid "Choose the default user:" msgstr "选择缺省的用户:" -#: ../../any.pm_.c:823 +#: ../../any.pm_.c:825 msgid "Choose the window manager to run:" msgstr "选择要运行的窗口管理程序:" -#: ../../any.pm_.c:838 +#: ../../any.pm_.c:840 msgid "Please choose a language to use." msgstr "请选择系统缺省使用的语言." -#: ../../any.pm_.c:840 +#: ../../any.pm_.c:842 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "您可以在这里增加系统中其他可用的语言" -#: ../../any.pm_.c:854 ../../install_steps_interactive.pm_.c:708 +#: ../../any.pm_.c:856 ../../install_steps_interactive.pm_.c:692 #: ../../standalone/drakxtv_.c:73 msgid "All" msgstr "全部" -#: ../../any.pm_.c:974 +#: ../../any.pm_.c:977 msgid "Allow all users" msgstr "允许所有用户使用" -#: ../../any.pm_.c:974 +#: ../../any.pm_.c:977 msgid "No sharing" msgstr "禁止共享" -#: ../../any.pm_.c:984 ../../standalone.pm_.c:57 +#: ../../any.pm_.c:987 ../../install_any.pm_.c:1183 ../../standalone.pm_.c:58 #, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "需要安装软件包 %s .您同意安装吗 ?" -#: ../../any.pm_.c:987 +#: ../../any.pm_.c:990 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "您可以通过 NFS 或 Samba 来共享文件. 您希望使用哪一个? " -#: ../../any.pm_.c:995 ../../standalone.pm_.c:61 +#: ../../any.pm_.c:998 ../../install_any.pm_.c:1188 ../../standalone.pm_.c:63 #, c-format msgid "Mandatory package %s is missing" msgstr "无法找到必需的软件包 %s" -#: ../../any.pm_.c:1001 +#: ../../any.pm_.c:1004 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " @@ -952,11 +960,11 @@ msgstr "" "在这里选择允许, 用户将可以在 KDE 和 Gnome 的文件管理器中点击 \"共享\"菜单项\n" "\"定制\" 允许按照不同用户细分设置.\n" -#: ../../any.pm_.c:1015 +#: ../../any.pm_.c:1018 msgid "Launch userdrake" msgstr "运行 Userdrake魔力用户管理" -#: ../../any.pm_.c:1017 +#: ../../any.pm_.c:1020 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." @@ -964,31 +972,31 @@ msgstr "" "按用户的共享使用组\"fileshare\". \n" "您可以使用 userdrake 添加一个用户到这个组." -#: ../../any.pm_.c:1068 +#: ../../any.pm_.c:1071 msgid "Welcome To Crackers" msgstr "欢迎入侵者" -#: ../../any.pm_.c:1069 +#: ../../any.pm_.c:1072 msgid "Poor" msgstr "差" -#: ../../any.pm_.c:1070 ../../mouse.pm_.c:31 +#: ../../any.pm_.c:1073 ../../mouse.pm_.c:31 msgid "Standard" msgstr "标准" -#: ../../any.pm_.c:1071 +#: ../../any.pm_.c:1074 msgid "High" msgstr "高" -#: ../../any.pm_.c:1072 +#: ../../any.pm_.c:1075 msgid "Higher" msgstr "更高" -#: ../../any.pm_.c:1073 +#: ../../any.pm_.c:1076 msgid "Paranoid" msgstr "苛刻" -#: ../../any.pm_.c:1076 +#: ../../any.pm_.c:1079 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" @@ -998,13 +1006,13 @@ msgstr "" "这一级别应慎重使用. 它是您的系统使用更简单, 然而也更脆弱:\n" "假如这台机器将要和其他机器联网或者接入互联网, 绝对不要采用这个级别." -#: ../../any.pm_.c:1079 +#: ../../any.pm_.c:1082 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "启用了口令检查功能. 但是仍不建议用于联网的电脑." -#: ../../any.pm_.c:1080 +#: ../../any.pm_.c:1083 msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." @@ -1012,13 +1020,13 @@ msgstr "" "标准安全级别: \n" "推荐在作为客户联接互联网的电脑上使用." -#: ../../any.pm_.c:1081 +#: ../../any.pm_.c:1084 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "添加了某些限制, 每天夜间自动执行更多检查." -#: ../../any.pm_.c:1082 +#: ../../any.pm_.c:1085 msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" @@ -1031,7 +1039,7 @@ msgstr "" "拥有足够的安全性, 系统可以作为服务器接受来自众多客户的连接.注意: 如果您的机器" "不在互联网上提供服务, 请选择一个较低级别." -#: ../../any.pm_.c:1085 +#: ../../any.pm_.c:1088 msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." @@ -1039,28 +1047,28 @@ msgstr "" "类似于前一安全级别, 不过系统处于完全封闭状态.\n" "所有安全特性达到最大限度." -#: ../../any.pm_.c:1091 +#: ../../any.pm_.c:1094 msgid "DrakSec Basic Options" msgstr "DrakSec安全配置精灵 基本选项" -#: ../../any.pm_.c:1092 +#: ../../any.pm_.c:1095 msgid "Please choose the desired security level" msgstr "请选择期望的安全级别" -#: ../../any.pm_.c:1095 +#: ../../any.pm_.c:1098 msgid "Security level" msgstr "安全级别" -#: ../../any.pm_.c:1097 +#: ../../any.pm_.c:1100 msgid "Use libsafe for servers" msgstr "服务器使用 libsafe" -#: ../../any.pm_.c:1098 +#: ../../any.pm_.c:1101 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "防止缓冲溢出和串格式攻击" -#: ../../any.pm_.c:1099 +#: ../../any.pm_.c:1102 msgid "Security Administrator (login or email)" msgstr "安全管理员 (登录名或 email)" @@ -1092,57 +1100,57 @@ msgstr "" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:935 +#: ../../bootloader.pm_.c:932 msgid "Welcome to GRUB the operating system chooser!" msgstr "Welcome to GRUB the operating system chooser!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:938 +#: ../../bootloader.pm_.c:935 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:941 +#: ../../bootloader.pm_.c:938 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Press enter to boot the selected OS, 'e' to edit the" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:944 +#: ../../bootloader.pm_.c:941 msgid "commands before booting, or 'c' for a command-line." msgstr "commands before booting, or 'c' for a command-line." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long -#: ../../bootloader.pm_.c:947 +#: ../../bootloader.pm_.c:944 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "The highlighted entry will be booted automatically in %d seconds." -#: ../../bootloader.pm_.c:951 +#: ../../bootloader.pm_.c:948 msgid "not enough room in /boot" msgstr " /boot 中没有足够空间" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language -#: ../../bootloader.pm_.c:1051 +#: ../../bootloader.pm_.c:1048 msgid "Desktop" msgstr "桌面" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows -#: ../../bootloader.pm_.c:1053 +#: ../../bootloader.pm_.c:1050 msgid "Start Menu" msgstr "开始菜单" -#: ../../bootloader.pm_.c:1072 +#: ../../bootloader.pm_.c:1069 #, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "%s 分区不能安装开机引导程序\n" -#: ../../bootlook.pm_.c:45 +#: ../../bootlook.pm_.c:45 ../../standalone/draksplash_.c:25 msgid "no help implemented yet.\n" msgstr "帮助功能未实现.\n" @@ -1150,8 +1158,8 @@ msgstr " msgid "Boot Style Configuration" msgstr "启动配置" -#: ../../bootlook.pm_.c:78 ../../harddrake/ui.pm_.c:59 -#: ../../harddrake/ui.pm_.c:60 ../../standalone/drakfloppy_.c:81 +#: ../../bootlook.pm_.c:78 ../../harddrake/ui.pm_.c:62 +#: ../../harddrake/ui.pm_.c:63 ../../standalone/drakfloppy_.c:81 #: ../../standalone/logdrake_.c:101 msgid "/_File" msgstr "/_F 文件" @@ -1161,7 +1169,7 @@ msgstr "/_F msgid "/File/_Quit" msgstr "/F 文件/_Q 退出" -#: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:60 +#: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:63 #: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107 msgid "Q" msgstr "Q" @@ -1202,54 +1210,59 @@ msgstr " msgid "Display theme under console" msgstr "控制台下显示主题" -#: ../../bootlook.pm_.c:166 +#: ../../bootlook.pm_.c:145 +msgid "Create new theme" +msgstr "创建新的主题" + +#: ../../bootlook.pm_.c:169 msgid "Can't create Bootsplash preview" msgstr "无法创建开机画面预览" -#: ../../bootlook.pm_.c:166 ../../bootlook.pm_.c:184 ../../bootlook.pm_.c:187 -#: ../../bootlook.pm_.c:190 ../../bootlook.pm_.c:220 ../../bootlook.pm_.c:222 -#: ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:241 ../../bootlook.pm_.c:248 -#: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:336 -#: ../../diskdrake/interactive.pm_.c:351 ../../diskdrake/interactive.pm_.c:464 -#: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/smbnfs_gtk.pm_.c:45 +#: ../../bootlook.pm_.c:169 ../../bootlook.pm_.c:187 ../../bootlook.pm_.c:190 +#: ../../bootlook.pm_.c:193 ../../bootlook.pm_.c:223 ../../bootlook.pm_.c:225 +#: ../../bootlook.pm_.c:235 ../../bootlook.pm_.c:244 ../../bootlook.pm_.c:251 +#: ../../diskdrake/dav.pm_.c:73 ../../diskdrake/hd_gtk.pm_.c:116 +#: ../../diskdrake/interactive.pm_.c:340 ../../diskdrake/interactive.pm_.c:355 +#: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/interactive.pm_.c:474 +#: ../../diskdrake/smbnfs_gtk.pm_.c:45 ../../fsedit.pm_.c:239 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67 -#: ../../install_steps_interactive.pm_.c:365 ../../interactive/http.pm_.c:119 -#: ../../interactive/http.pm_.c:120 ../../standalone/diskdrake_.c:80 +#: ../../interactive/http.pm_.c:119 ../../interactive/http.pm_.c:120 +#: ../../standalone/draksplash_.c:32 msgid "Error" msgstr "错误" -#: ../../bootlook.pm_.c:183 +#: ../../bootlook.pm_.c:186 #, c-format msgid "Backup %s to %s.old" msgstr "把 %s 备份到 %s.old" -#: ../../bootlook.pm_.c:184 +#: ../../bootlook.pm_.c:187 msgid "unable to backup lilo message" msgstr "无法备份 LILO 消息" -#: ../../bootlook.pm_.c:186 +#: ../../bootlook.pm_.c:189 #, c-format msgid "Copy %s to %s" msgstr "把 %s 复制到 %s" -#: ../../bootlook.pm_.c:187 +#: ../../bootlook.pm_.c:190 msgid "can't change lilo message" msgstr "无法修改 LILO 消息" -#: ../../bootlook.pm_.c:190 +#: ../../bootlook.pm_.c:193 msgid "Lilo message not found" msgstr "没有找到 LILO 消息" -#: ../../bootlook.pm_.c:220 +#: ../../bootlook.pm_.c:223 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "无法写入 /etc/sysconfig/bootsplash." -#: ../../bootlook.pm_.c:220 +#: ../../bootlook.pm_.c:223 #, c-format msgid "Write %s" msgstr "写入 %s" -#: ../../bootlook.pm_.c:222 +#: ../../bootlook.pm_.c:225 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." @@ -1257,17 +1270,17 @@ msgstr "" "无法写入 /etc/sysconfig/bootsplash.\n" "没有找到文件." -#: ../../bootlook.pm_.c:233 +#: ../../bootlook.pm_.c:236 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "无法打开 mkinitrd -f /boot/initrd-%s.img %s." -#: ../../bootlook.pm_.c:236 +#: ../../bootlook.pm_.c:239 #, c-format -msgid "Make initrd 'mkinird -f /boot/initrd-%s.img %s'." -msgstr "建造 initrd 'mkinird -f /boot/initrd-%s.img %s'." +msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'." +msgstr "建造 initrd 'mkinitrd -f /boot/initrd-%s.img %s'." -#: ../../bootlook.pm_.c:242 +#: ../../bootlook.pm_.c:245 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." @@ -1275,23 +1288,24 @@ msgstr "" "无法重新起动 LiLo!\n" "以 root 身分运行 \"lilo\" 命令, 以完成 LiLo 主题安装." -#: ../../bootlook.pm_.c:246 +#: ../../bootlook.pm_.c:249 msgid "Relaunch 'lilo'" msgstr "重新起动 'liLo'" -#: ../../bootlook.pm_.c:248 +#: ../../bootlook.pm_.c:251 ../../standalone/draksplash_.c:161 +#: ../../standalone/draksplash_.c:330 ../../standalone/draksplash_.c:454 msgid "Notice" msgstr "注意" -#: ../../bootlook.pm_.c:249 +#: ../../bootlook.pm_.c:252 msgid "LiLo and Bootsplash themes installation successfull" msgstr "LiLo 和 Bootsplash 主题安装成功" -#: ../../bootlook.pm_.c:249 +#: ../../bootlook.pm_.c:252 msgid "Theme installation failed!" msgstr "主题安装失败!" -#: ../../bootlook.pm_.c:258 +#: ../../bootlook.pm_.c:261 #, c-format msgid "" "You are currently using %s as your boot manager.\n" @@ -1300,22 +1314,21 @@ msgstr "" "你目前使用 %s 作为开机程序管理器.\n" "点击 '配置' 按钮运行配置精灵." -#: ../../bootlook.pm_.c:260 ../../standalone/drakbackup_.c:2352 -#: ../../standalone/drakbackup_.c:2362 ../../standalone/drakbackup_.c:2372 -#: ../../standalone/drakbackup_.c:2380 ../../standalone/drakgw_.c:592 -#: ../../standalone/tinyfirewall_.c:58 +#: ../../bootlook.pm_.c:263 ../../standalone/drakbackup_.c:2427 +#: ../../standalone/drakbackup_.c:2437 ../../standalone/drakbackup_.c:2447 +#: ../../standalone/drakbackup_.c:2455 ../../standalone/drakgw_.c:530 msgid "Configure" msgstr "配置" -#: ../../bootlook.pm_.c:267 +#: ../../bootlook.pm_.c:270 msgid "Splash selection" msgstr "选择起动画面" -#: ../../bootlook.pm_.c:270 +#: ../../bootlook.pm_.c:273 msgid "Themes" msgstr "主题" -#: ../../bootlook.pm_.c:272 +#: ../../bootlook.pm_.c:275 msgid "" "\n" "Select a theme for\n" @@ -1327,44 +1340,44 @@ msgstr "" "选择用于 lilo 和 bootsplash 的主题,\n" "您可以分别选择" -#: ../../bootlook.pm_.c:275 +#: ../../bootlook.pm_.c:278 msgid "Lilo screen" msgstr "Lilo 屏幕" -#: ../../bootlook.pm_.c:279 +#: ../../bootlook.pm_.c:283 msgid "Bootsplash" msgstr "Bootsplash 开机画面" -#: ../../bootlook.pm_.c:314 +#: ../../bootlook.pm_.c:318 msgid "System mode" msgstr "系统模式" -#: ../../bootlook.pm_.c:316 +#: ../../bootlook.pm_.c:320 msgid "Launch the graphical environment when your system starts" msgstr "启动时运行X窗口" -#: ../../bootlook.pm_.c:321 +#: ../../bootlook.pm_.c:325 msgid "No, I don't want autologin" msgstr "不，不要自动录入" -#: ../../bootlook.pm_.c:323 +#: ../../bootlook.pm_.c:327 msgid "Yes, I want autologin with this (user, desktop)" msgstr "是, 以(用户,桌面)录入" -#: ../../bootlook.pm_.c:333 ../../network/netconnect.pm_.c:101 +#: ../../bootlook.pm_.c:337 ../../network/netconnect.pm_.c:101 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 -#: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:3513 -#: ../../standalone/drakbackup_.c:4290 ../../standalone/drakconnect_.c:108 +#: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:4191 +#: ../../standalone/drakbackup_.c:4952 ../../standalone/drakconnect_.c:108 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667 #: ../../standalone/drakfloppy_.c:376 ../../standalone/drakfont_.c:612 #: ../../standalone/drakfont_.c:799 ../../standalone/drakfont_.c:876 -#: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:521 +#: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:519 msgid "OK" msgstr "确定" -#: ../../bootlook.pm_.c:403 +#: ../../bootlook.pm_.c:407 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "无法打开 /etc/inittab 读: %s" @@ -1461,49 +1474,50 @@ msgstr " msgid "United States" msgstr "美国" -#: ../../detect_devices.pm_.c:599 ../../detect_devices.pm_.c:641 -#: ../../detect_devices.pm_.c:803 -msgid "Unknown Model" -msgstr "未知型号" - #: ../../diskdrake/dav.pm_.c:23 -#, fuzzy msgid "New" msgstr "新建" -#: ../../diskdrake/dav.pm_.c:57 +#: ../../diskdrake/dav.pm_.c:59 ../../diskdrake/interactive.pm_.c:388 +#: ../../diskdrake/smbnfs_gtk.pm_.c:81 +msgid "Unmount" +msgstr "卸载" + +#: ../../diskdrake/dav.pm_.c:60 ../../diskdrake/interactive.pm_.c:385 +#: ../../diskdrake/smbnfs_gtk.pm_.c:82 +msgid "Mount" +msgstr "装载" + +#: ../../diskdrake/dav.pm_.c:61 msgid "Server" msgstr "服务器" -#: ../../diskdrake/dav.pm_.c:58 ../../diskdrake/interactive.pm_.c:375 -#: ../../diskdrake/interactive.pm_.c:558 ../../diskdrake/interactive.pm_.c:585 +#: ../../diskdrake/dav.pm_.c:62 ../../diskdrake/interactive.pm_.c:379 +#: ../../diskdrake/interactive.pm_.c:568 ../../diskdrake/interactive.pm_.c:595 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15 #: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "装载点" -#: ../../diskdrake/dav.pm_.c:68 -#, fuzzy +#: ../../diskdrake/dav.pm_.c:81 msgid "Please enter the WebDAV server URL" -msgstr "请输入刻盘机速度." +msgstr "请输入 WebDAV 服务器的 URL" -#: ../../diskdrake/dav.pm_.c:71 -#, fuzzy +#: ../../diskdrake/dav.pm_.c:84 msgid "The URL must begin with http:// or https://" -msgstr "Url 应该是以 'ftp:' 或 'http:'开头" +msgstr "Url 应该是以 'http://' 或 'https://'开头" -#: ../../diskdrake/dav.pm_.c:92 -#, fuzzy +#: ../../diskdrake/dav.pm_.c:105 msgid "Server: " -msgstr "服务器" +msgstr "服务器:" -#: ../../diskdrake/dav.pm_.c:93 ../../diskdrake/interactive.pm_.c:435 -#: ../../diskdrake/interactive.pm_.c:1079 -#: ../../diskdrake/interactive.pm_.c:1153 +#: ../../diskdrake/dav.pm_.c:106 ../../diskdrake/interactive.pm_.c:440 +#: ../../diskdrake/interactive.pm_.c:1089 +#: ../../diskdrake/interactive.pm_.c:1164 msgid "Mount point: " msgstr "加载点:" -#: ../../diskdrake/dav.pm_.c:94 ../../diskdrake/interactive.pm_.c:1159 +#: ../../diskdrake/dav.pm_.c:107 ../../diskdrake/interactive.pm_.c:1170 #, c-format msgid "Options: %s" msgstr "选项: %s" @@ -1512,8 +1526,9 @@ msgstr "选 msgid "Please make a backup of your data first" msgstr "请先备份您的数据" -#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:924 -#: ../../diskdrake/interactive.pm_.c:933 ../../diskdrake/interactive.pm_.c:999 +#: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:934 +#: ../../diskdrake/interactive.pm_.c:943 +#: ../../diskdrake/interactive.pm_.c:1009 msgid "Read carefully!" msgstr "请仔细阅读!" @@ -1551,10 +1566,14 @@ msgid "Please click on a partition" msgstr "请选中一个分区" #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 -#: ../../install_steps_gtk.pm_.c:471 +#: ../../install_steps_gtk.pm_.c:465 msgid "Details" msgstr "详细情况" +#: ../../diskdrake/hd_gtk.pm_.c:252 +msgid "No hard drives found" +msgstr "没有发现打印机" + #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2" @@ -1579,13 +1598,13 @@ msgstr "SunOS" msgid "Swap" msgstr "交换分区" -#: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1095 +#: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1105 msgid "Empty" msgstr "空" -#: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:331 -#: ../../install_steps_gtk.pm_.c:389 ../../mouse.pm_.c:162 -#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1679 +#: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:325 +#: ../../install_steps_gtk.pm_.c:383 ../../mouse.pm_.c:165 +#: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1754 msgid "Other" msgstr "其他" @@ -1593,12 +1612,12 @@ msgstr " msgid "Filesystem types:" msgstr "文件系统类型:" -#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:397 +#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:402 msgid "Create" msgstr "新建" -#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:376 -#: ../../diskdrake/interactive.pm_.c:521 ../../diskdrake/removable.pm_.c:26 +#: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:380 +#: ../../diskdrake/interactive.pm_.c:531 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "类型" @@ -1608,7 +1627,7 @@ msgstr " msgid "Use ``%s'' instead" msgstr "用 ``%s'' 代替" -#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:385 +#: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:389 msgid "Delete" msgstr "删除" @@ -1616,108 +1635,108 @@ msgstr "删 msgid "Use ``Unmount'' first" msgstr "请先做 ``Unmount'' " -#: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:513 +#: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:518 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "在改变分区表 %s 的类型之后, 在这个分区上的所有资料将要被清除" -#: ../../diskdrake/interactive.pm_.c:173 +#: ../../diskdrake/interactive.pm_.c:174 msgid "Choose a partition" msgstr "选择分区" -#: ../../diskdrake/interactive.pm_.c:173 +#: ../../diskdrake/interactive.pm_.c:174 msgid "Choose another partition" msgstr "选择其他分区" -#: ../../diskdrake/interactive.pm_.c:198 +#: ../../diskdrake/interactive.pm_.c:199 msgid "Exit" msgstr "退出" -#: ../../diskdrake/interactive.pm_.c:220 +#: ../../diskdrake/interactive.pm_.c:221 msgid "Toggle to expert mode" msgstr "进入专家模式" -#: ../../diskdrake/interactive.pm_.c:220 +#: ../../diskdrake/interactive.pm_.c:221 msgid "Toggle to normal mode" msgstr "进入正常模式" -#: ../../diskdrake/interactive.pm_.c:220 +#: ../../diskdrake/interactive.pm_.c:221 msgid "Undo" msgstr "撤销" -#: ../../diskdrake/interactive.pm_.c:239 +#: ../../diskdrake/interactive.pm_.c:240 msgid "Continue anyway?" msgstr "冒险继续执行?" -#: ../../diskdrake/interactive.pm_.c:244 +#: ../../diskdrake/interactive.pm_.c:245 msgid "Quit without saving" msgstr "不保存改变就退出" -#: ../../diskdrake/interactive.pm_.c:244 +#: ../../diskdrake/interactive.pm_.c:245 msgid "Quit without writing the partition table?" msgstr "不写入分区表而退出?" -#: ../../diskdrake/interactive.pm_.c:249 +#: ../../diskdrake/interactive.pm_.c:250 msgid "Do you want to save /etc/fstab modifications" msgstr "您想要保存 /etc/fstab 修改吗 ?" -#: ../../diskdrake/interactive.pm_.c:261 +#: ../../diskdrake/interactive.pm_.c:263 msgid "Auto allocate" msgstr "自动分配" -#: ../../diskdrake/interactive.pm_.c:261 +#: ../../diskdrake/interactive.pm_.c:263 msgid "Clear all" msgstr "全部清除" -#: ../../diskdrake/interactive.pm_.c:261 +#: ../../diskdrake/interactive.pm_.c:263 #: ../../install_steps_interactive.pm_.c:214 msgid "More" msgstr "更多" -#: ../../diskdrake/interactive.pm_.c:264 +#: ../../diskdrake/interactive.pm_.c:267 msgid "Hard drive information" msgstr "硬盘信息" -#: ../../diskdrake/interactive.pm_.c:294 +#: ../../diskdrake/interactive.pm_.c:298 msgid "All primary partitions are used" msgstr "主区数目已经满了" -#: ../../diskdrake/interactive.pm_.c:295 +#: ../../diskdrake/interactive.pm_.c:299 msgid "I can't add any more partition" msgstr "我无法再新增任何分区了" -#: ../../diskdrake/interactive.pm_.c:296 +#: ../../diskdrake/interactive.pm_.c:300 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "如果需要更多的分区，请删除一个主分区以创建扩展分区" -#: ../../diskdrake/interactive.pm_.c:306 +#: ../../diskdrake/interactive.pm_.c:310 msgid "Save partition table" msgstr "保存分区表" -#: ../../diskdrake/interactive.pm_.c:307 +#: ../../diskdrake/interactive.pm_.c:311 msgid "Restore partition table" msgstr "正在尝试恢复分区表" -#: ../../diskdrake/interactive.pm_.c:308 +#: ../../diskdrake/interactive.pm_.c:312 msgid "Rescue partition table" msgstr "正在尝试修复分区表" -#: ../../diskdrake/interactive.pm_.c:310 +#: ../../diskdrake/interactive.pm_.c:314 msgid "Reload partition table" msgstr "重新读取分区表" -#: ../../diskdrake/interactive.pm_.c:315 +#: ../../diskdrake/interactive.pm_.c:319 msgid "Removable media automounting" msgstr "自动装载可移动介质" -#: ../../diskdrake/interactive.pm_.c:324 ../../diskdrake/interactive.pm_.c:344 +#: ../../diskdrake/interactive.pm_.c:328 ../../diskdrake/interactive.pm_.c:348 msgid "Select file" msgstr "选择文件" -#: ../../diskdrake/interactive.pm_.c:331 +#: ../../diskdrake/interactive.pm_.c:335 msgid "" "The backup partition table has not the same size\n" "Still continue?" @@ -1725,11 +1744,11 @@ msgstr "" "备份分区表的大小和原来的不同\n" "继续吗 ?" -#: ../../diskdrake/interactive.pm_.c:345 +#: ../../diskdrake/interactive.pm_.c:349 msgid "Warning" msgstr "警告" -#: ../../diskdrake/interactive.pm_.c:346 +#: ../../diskdrake/interactive.pm_.c:350 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" @@ -1737,79 +1756,71 @@ msgstr "" "请在驱动器中插入一张软盘\n" "这张软盘上所有的数据将要被清除" -#: ../../diskdrake/interactive.pm_.c:357 +#: ../../diskdrake/interactive.pm_.c:361 msgid "Trying to rescue partition table" msgstr "正在尝试恢复分区表" -#: ../../diskdrake/interactive.pm_.c:363 +#: ../../diskdrake/interactive.pm_.c:367 msgid "Detailed information" msgstr "详细信息" -#: ../../diskdrake/interactive.pm_.c:378 ../../diskdrake/interactive.pm_.c:652 +#: ../../diskdrake/interactive.pm_.c:382 ../../diskdrake/interactive.pm_.c:662 msgid "Resize" msgstr "改变大小" -#: ../../diskdrake/interactive.pm_.c:379 ../../diskdrake/interactive.pm_.c:705 +#: ../../diskdrake/interactive.pm_.c:383 ../../diskdrake/interactive.pm_.c:715 msgid "Move" msgstr "移动" -#: ../../diskdrake/interactive.pm_.c:380 +#: ../../diskdrake/interactive.pm_.c:384 msgid "Format" msgstr "格式化" -#: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/smbnfs_gtk.pm_.c:82 -msgid "Mount" -msgstr "装载" - -#: ../../diskdrake/interactive.pm_.c:382 +#: ../../diskdrake/interactive.pm_.c:386 msgid "Add to RAID" msgstr "加入磁盘阵列" -#: ../../diskdrake/interactive.pm_.c:383 +#: ../../diskdrake/interactive.pm_.c:387 msgid "Add to LVM" msgstr "加入磁盘阵列" -#: ../../diskdrake/interactive.pm_.c:384 ../../diskdrake/smbnfs_gtk.pm_.c:81 -msgid "Unmount" -msgstr "卸载" - -#: ../../diskdrake/interactive.pm_.c:386 +#: ../../diskdrake/interactive.pm_.c:390 msgid "Remove from RAID" msgstr "从磁盘阵列中移出" -#: ../../diskdrake/interactive.pm_.c:387 +#: ../../diskdrake/interactive.pm_.c:391 msgid "Remove from LVM" msgstr "从磁盘阵列中移出" -#: ../../diskdrake/interactive.pm_.c:388 +#: ../../diskdrake/interactive.pm_.c:392 msgid "Modify RAID" msgstr "更改磁盘阵列设定" -#: ../../diskdrake/interactive.pm_.c:389 +#: ../../diskdrake/interactive.pm_.c:393 msgid "Use for loopback" msgstr "用于回环" -#: ../../diskdrake/interactive.pm_.c:428 +#: ../../diskdrake/interactive.pm_.c:433 msgid "Create a new partition" msgstr "创建一个新的分区" -#: ../../diskdrake/interactive.pm_.c:431 +#: ../../diskdrake/interactive.pm_.c:436 msgid "Start sector: " msgstr "开始扇区: " -#: ../../diskdrake/interactive.pm_.c:433 ../../diskdrake/interactive.pm_.c:805 +#: ../../diskdrake/interactive.pm_.c:438 ../../diskdrake/interactive.pm_.c:815 msgid "Size in MB: " msgstr "大小 (MB) " -#: ../../diskdrake/interactive.pm_.c:434 ../../diskdrake/interactive.pm_.c:806 +#: ../../diskdrake/interactive.pm_.c:439 ../../diskdrake/interactive.pm_.c:816 msgid "Filesystem type: " msgstr "文件系统类型: " -#: ../../diskdrake/interactive.pm_.c:439 +#: ../../diskdrake/interactive.pm_.c:444 msgid "Preference: " msgstr "偏好设定" -#: ../../diskdrake/interactive.pm_.c:464 +#: ../../diskdrake/interactive.pm_.c:469 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" @@ -1819,33 +1830,33 @@ msgstr "" "(您超过了允许的主分区数量).\n" "请先删除一个主分区, 然后创建一个扩展分区." -#: ../../diskdrake/interactive.pm_.c:494 +#: ../../diskdrake/interactive.pm_.c:499 msgid "Remove the loopback file?" msgstr "删除回环(loopback)文件?" -#: ../../diskdrake/interactive.pm_.c:519 +#: ../../diskdrake/interactive.pm_.c:529 msgid "Change partition type" msgstr "改变分区类型" -#: ../../diskdrake/interactive.pm_.c:520 ../../diskdrake/removable.pm_.c:48 +#: ../../diskdrake/interactive.pm_.c:530 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "您希望使用哪种文件系统?" -#: ../../diskdrake/interactive.pm_.c:526 +#: ../../diskdrake/interactive.pm_.c:536 msgid "Switching from ext2 to ext3" msgstr "把ext2升级到ext3" -#: ../../diskdrake/interactive.pm_.c:556 +#: ../../diskdrake/interactive.pm_.c:566 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "您想把回环(loopback)文件 %s 装载到哪里?" -#: ../../diskdrake/interactive.pm_.c:557 +#: ../../diskdrake/interactive.pm_.c:567 #, c-format msgid "Where do you want to mount device %s?" msgstr "您想把设备 %s 装载到哪里?" -#: ../../diskdrake/interactive.pm_.c:563 +#: ../../diskdrake/interactive.pm_.c:573 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" @@ -1853,135 +1864,135 @@ msgstr "" "无法取消设定的装载点, 这个分区正用于回环.\n" "请先删除回环" -#: ../../diskdrake/interactive.pm_.c:584 -#, fuzzy, c-format +#: ../../diskdrake/interactive.pm_.c:594 +#, c-format msgid "Where do you want to mount %s?" -msgstr "您想把设备 %s 装载到哪里?" +msgstr "您想把 %s 装载到哪里?" -#: ../../diskdrake/interactive.pm_.c:608 +#: ../../diskdrake/interactive.pm_.c:618 msgid "Computing FAT filesystem bounds" msgstr "计算 FAT 文件系统的边界" -#: ../../diskdrake/interactive.pm_.c:608 ../../diskdrake/interactive.pm_.c:667 -#: ../../install_interactive.pm_.c:131 +#: ../../diskdrake/interactive.pm_.c:618 ../../diskdrake/interactive.pm_.c:677 +#: ../../install_interactive.pm_.c:133 msgid "Resizing" msgstr "正在改变大小" -#: ../../diskdrake/interactive.pm_.c:640 +#: ../../diskdrake/interactive.pm_.c:650 msgid "This partition is not resizeable" msgstr "不能改变这个分区的大小" -#: ../../diskdrake/interactive.pm_.c:645 +#: ../../diskdrake/interactive.pm_.c:655 msgid "All data on this partition should be backed-up" msgstr "应该先备份在这个分区上的所有数据" -#: ../../diskdrake/interactive.pm_.c:647 +#: ../../diskdrake/interactive.pm_.c:657 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除" -#: ../../diskdrake/interactive.pm_.c:652 +#: ../../diskdrake/interactive.pm_.c:662 msgid "Choose the new size" msgstr "选择新的大小" -#: ../../diskdrake/interactive.pm_.c:653 +#: ../../diskdrake/interactive.pm_.c:663 msgid "New size in MB: " msgstr "新大小 (MB): " -#: ../../diskdrake/interactive.pm_.c:706 +#: ../../diskdrake/interactive.pm_.c:716 msgid "Which disk do you want to move it to?" msgstr "您想移动到哪个盘 ?" -#: ../../diskdrake/interactive.pm_.c:707 +#: ../../diskdrake/interactive.pm_.c:717 msgid "Sector" msgstr "扇区" -#: ../../diskdrake/interactive.pm_.c:708 +#: ../../diskdrake/interactive.pm_.c:718 msgid "Which sector do you want to move it to?" msgstr "您想移动到哪个扇区 ?" -#: ../../diskdrake/interactive.pm_.c:711 +#: ../../diskdrake/interactive.pm_.c:721 msgid "Moving" msgstr "移动中" -#: ../../diskdrake/interactive.pm_.c:711 +#: ../../diskdrake/interactive.pm_.c:721 msgid "Moving partition..." msgstr "正在移动分区..." -#: ../../diskdrake/interactive.pm_.c:728 +#: ../../diskdrake/interactive.pm_.c:738 msgid "Choose an existing RAID to add to" msgstr "选择加入一个已存在的 RAID" -#: ../../diskdrake/interactive.pm_.c:729 ../../diskdrake/interactive.pm_.c:746 +#: ../../diskdrake/interactive.pm_.c:739 ../../diskdrake/interactive.pm_.c:756 msgid "new" msgstr "新建" -#: ../../diskdrake/interactive.pm_.c:744 +#: ../../diskdrake/interactive.pm_.c:754 msgid "Choose an existing LVM to add to" msgstr "选择加入一个已存在的 LVM" -#: ../../diskdrake/interactive.pm_.c:749 +#: ../../diskdrake/interactive.pm_.c:759 msgid "LVM name?" msgstr "LVM名称?" -#: ../../diskdrake/interactive.pm_.c:790 +#: ../../diskdrake/interactive.pm_.c:800 msgid "This partition can't be used for loopback" msgstr "这个分区不能被用于回环" -#: ../../diskdrake/interactive.pm_.c:803 +#: ../../diskdrake/interactive.pm_.c:813 msgid "Loopback" msgstr "回环" -#: ../../diskdrake/interactive.pm_.c:804 +#: ../../diskdrake/interactive.pm_.c:814 msgid "Loopback file name: " msgstr "回环文件名: " -#: ../../diskdrake/interactive.pm_.c:809 +#: ../../diskdrake/interactive.pm_.c:819 msgid "Give a file name" msgstr "文件名" -#: ../../diskdrake/interactive.pm_.c:812 +#: ../../diskdrake/interactive.pm_.c:822 msgid "File already used by another loopback, choose another one" msgstr "文件已经被另一个回环使用, 请选择其他" -#: ../../diskdrake/interactive.pm_.c:813 +#: ../../diskdrake/interactive.pm_.c:823 msgid "File already exists. Use it?" msgstr "文件已经存在. 使用现有的文件?" -#: ../../diskdrake/interactive.pm_.c:836 +#: ../../diskdrake/interactive.pm_.c:846 msgid "Mount options" msgstr "装载选项" -#: ../../diskdrake/interactive.pm_.c:843 +#: ../../diskdrake/interactive.pm_.c:853 msgid "Various" msgstr "变量" -#: ../../diskdrake/interactive.pm_.c:907 ../../standalone/drakfloppy_.c:103 +#: ../../diskdrake/interactive.pm_.c:917 ../../standalone/drakfloppy_.c:103 msgid "device" msgstr "设备" -#: ../../diskdrake/interactive.pm_.c:908 +#: ../../diskdrake/interactive.pm_.c:918 msgid "level" msgstr "级别" -#: ../../diskdrake/interactive.pm_.c:909 +#: ../../diskdrake/interactive.pm_.c:919 msgid "chunk size" msgstr "组块大小" -#: ../../diskdrake/interactive.pm_.c:924 +#: ../../diskdrake/interactive.pm_.c:934 msgid "Be careful: this operation is dangerous." msgstr "小心: 这个操作有危险." -#: ../../diskdrake/interactive.pm_.c:939 +#: ../../diskdrake/interactive.pm_.c:949 msgid "What type of partitioning?" msgstr "请问您分区类型?" -#: ../../diskdrake/interactive.pm_.c:955 +#: ../../diskdrake/interactive.pm_.c:965 #, c-format msgid "The package %s is needed. Install it?" msgstr "需要安装软件包 %s . 您同意安装吗?" -#: ../../diskdrake/interactive.pm_.c:969 +#: ../../diskdrake/interactive.pm_.c:979 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" @@ -1992,7 +2003,7 @@ msgstr "" "如果您使用 LILO, 它没法正常工作; 假如您不使用 LILO, \n" "则不需要创建 /boot 分区" -#: ../../diskdrake/interactive.pm_.c:973 +#: ../../diskdrake/interactive.pm_.c:983 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" @@ -2003,7 +2014,7 @@ msgstr "" "并且您没有创建 /boot 分区.\n" "如果您计划使用 LILO 启动管理程序, 请在适当位置加入 /boot 分区." -#: ../../diskdrake/interactive.pm_.c:979 +#: ../../diskdrake/interactive.pm_.c:989 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" @@ -2013,44 +2024,44 @@ msgstr "" "如果没有 /boot 分区, 开机引导程序无法处理这种情况.\n" "所以, 请增加一个 /boot 分区." -#: ../../diskdrake/interactive.pm_.c:999 +#: ../../diskdrake/interactive.pm_.c:1009 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "驱动器 %s 的分区表将会写入磁盘中 !" -#: ../../diskdrake/interactive.pm_.c:1003 +#: ../../diskdrake/interactive.pm_.c:1013 msgid "You'll need to reboot before the modification can take place" msgstr "您必需重新开机使您做的更动生效" -#: ../../diskdrake/interactive.pm_.c:1014 +#: ../../diskdrake/interactive.pm_.c:1024 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "格式化分区 %s 之后, 在这个分区上的所有资料将要被清除" -#: ../../diskdrake/interactive.pm_.c:1016 +#: ../../diskdrake/interactive.pm_.c:1026 msgid "Formatting" msgstr "正在格式化" -#: ../../diskdrake/interactive.pm_.c:1017 +#: ../../diskdrake/interactive.pm_.c:1027 #, c-format msgid "Formatting loopback file %s" msgstr "正在格式化回环(loopback)文件 %s" -#: ../../diskdrake/interactive.pm_.c:1018 -#: ../../install_steps_interactive.pm_.c:476 +#: ../../diskdrake/interactive.pm_.c:1028 +#: ../../install_steps_interactive.pm_.c:459 #, c-format msgid "Formatting partition %s" msgstr "正在格式化分区 %s" -#: ../../diskdrake/interactive.pm_.c:1029 +#: ../../diskdrake/interactive.pm_.c:1039 msgid "Hide files" msgstr "隐藏文件" -#: ../../diskdrake/interactive.pm_.c:1029 +#: ../../diskdrake/interactive.pm_.c:1039 msgid "Move files to the new partition" msgstr "移动文件到新分区" -#: ../../diskdrake/interactive.pm_.c:1030 +#: ../../diskdrake/interactive.pm_.c:1040 #, c-format msgid "" "Directory %s already contains data\n" @@ -2059,83 +2070,83 @@ msgstr "" "目录 %s 已经包含数据\n" "(%s)" -#: ../../diskdrake/interactive.pm_.c:1041 +#: ../../diskdrake/interactive.pm_.c:1051 msgid "Moving files to the new partition" msgstr "正在移动文件到新分区" -#: ../../diskdrake/interactive.pm_.c:1045 +#: ../../diskdrake/interactive.pm_.c:1055 #, c-format msgid "Copying %s" msgstr "拷贝 %s" -#: ../../diskdrake/interactive.pm_.c:1049 +#: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "Removing %s" msgstr "删除 %s" -#: ../../diskdrake/interactive.pm_.c:1059 +#: ../../diskdrake/interactive.pm_.c:1069 #, c-format msgid "partition %s is now known as %s" msgstr "分区 %s 现在成为 %s" -#: ../../diskdrake/interactive.pm_.c:1080 -#: ../../diskdrake/interactive.pm_.c:1139 +#: ../../diskdrake/interactive.pm_.c:1090 +#: ../../diskdrake/interactive.pm_.c:1149 msgid "Device: " msgstr "设备: " -#: ../../diskdrake/interactive.pm_.c:1081 +#: ../../diskdrake/interactive.pm_.c:1091 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "DOS 下的盘符: %s ( 只是猜测 )\n" -#: ../../diskdrake/interactive.pm_.c:1085 -#: ../../diskdrake/interactive.pm_.c:1093 -#: ../../diskdrake/interactive.pm_.c:1157 +#: ../../diskdrake/interactive.pm_.c:1095 +#: ../../diskdrake/interactive.pm_.c:1103 +#: ../../diskdrake/interactive.pm_.c:1168 msgid "Type: " msgstr "类型: " -#: ../../diskdrake/interactive.pm_.c:1089 +#: ../../diskdrake/interactive.pm_.c:1099 msgid "Name: " msgstr "名称: " -#: ../../diskdrake/interactive.pm_.c:1097 +#: ../../diskdrake/interactive.pm_.c:1107 #, c-format msgid "Start: sector %s\n" msgstr "开始: 第 %s 扇区\n" -#: ../../diskdrake/interactive.pm_.c:1098 +#: ../../diskdrake/interactive.pm_.c:1108 #, c-format msgid "Size: %s" msgstr "大小: %s" -#: ../../diskdrake/interactive.pm_.c:1100 +#: ../../diskdrake/interactive.pm_.c:1110 #, c-format msgid ", %s sectors" msgstr ", 第 %s 扇区" -#: ../../diskdrake/interactive.pm_.c:1102 +#: ../../diskdrake/interactive.pm_.c:1112 #, c-format msgid "Cylinder %d to %d\n" msgstr " 柱面 %d 到 %d\n" -#: ../../diskdrake/interactive.pm_.c:1103 +#: ../../diskdrake/interactive.pm_.c:1113 msgid "Formatted\n" msgstr "已格式化\n" -#: ../../diskdrake/interactive.pm_.c:1104 +#: ../../diskdrake/interactive.pm_.c:1114 msgid "Not formatted\n" msgstr "未格式化\n" -#: ../../diskdrake/interactive.pm_.c:1105 +#: ../../diskdrake/interactive.pm_.c:1115 msgid "Mounted\n" msgstr "已装载\n" -#: ../../diskdrake/interactive.pm_.c:1106 +#: ../../diskdrake/interactive.pm_.c:1116 #, c-format msgid "RAID md%s\n" msgstr "磁盘阵列 (RAID) md%s\n" -#: ../../diskdrake/interactive.pm_.c:1108 +#: ../../diskdrake/interactive.pm_.c:1118 #, c-format msgid "" "Loopback file(s):\n" @@ -2144,7 +2155,7 @@ msgstr "" "回环文件:\n" " %s\n" -#: ../../diskdrake/interactive.pm_.c:1109 +#: ../../diskdrake/interactive.pm_.c:1119 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" @@ -2152,27 +2163,27 @@ msgstr "" "预设的开机分区\n" " (给 MS-DOS 开机程序用的, 跟 lilo 无关)\n" -#: ../../diskdrake/interactive.pm_.c:1111 +#: ../../diskdrake/interactive.pm_.c:1121 #, c-format msgid "Level %s\n" msgstr "级别 %s\n" -#: ../../diskdrake/interactive.pm_.c:1112 +#: ../../diskdrake/interactive.pm_.c:1122 #, c-format msgid "Chunk size %s\n" msgstr "组块大小 %s\n" -#: ../../diskdrake/interactive.pm_.c:1113 +#: ../../diskdrake/interactive.pm_.c:1123 #, c-format msgid "RAID-disks %s\n" msgstr "RAID 磁盘 %s\n" -#: ../../diskdrake/interactive.pm_.c:1115 +#: ../../diskdrake/interactive.pm_.c:1125 #, c-format msgid "Loopback file name: %s" msgstr "回环文件名称: %s" -#: ../../diskdrake/interactive.pm_.c:1118 +#: ../../diskdrake/interactive.pm_.c:1128 msgid "" "\n" "Chances are, this partition is\n" @@ -2183,7 +2194,7 @@ msgstr "" "本分区是驱动分区\n" "请不要更改.\n" -#: ../../diskdrake/interactive.pm_.c:1121 +#: ../../diskdrake/interactive.pm_.c:1131 msgid "" "\n" "This special Bootstrap\n" @@ -2194,57 +2205,61 @@ msgstr "" "该启动分区特别\n" "是保留给双重启动系统\n" -#: ../../diskdrake/interactive.pm_.c:1140 +#: ../../diskdrake/interactive.pm_.c:1150 +msgid "Read-only" +msgstr "只读" + +#: ../../diskdrake/interactive.pm_.c:1151 #, c-format msgid "Size: %s\n" msgstr "大小: %s\n" -#: ../../diskdrake/interactive.pm_.c:1141 +#: ../../diskdrake/interactive.pm_.c:1152 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n" -#: ../../diskdrake/interactive.pm_.c:1142 +#: ../../diskdrake/interactive.pm_.c:1153 msgid "Info: " msgstr "信息: " -#: ../../diskdrake/interactive.pm_.c:1143 +#: ../../diskdrake/interactive.pm_.c:1154 #, c-format msgid "LVM-disks %s\n" msgstr "LVM 磁盘 %s\n" -#: ../../diskdrake/interactive.pm_.c:1144 +#: ../../diskdrake/interactive.pm_.c:1155 #, c-format msgid "Partition table type: %s\n" msgstr "分区表类型: %s\n" -#: ../../diskdrake/interactive.pm_.c:1145 +#: ../../diskdrake/interactive.pm_.c:1156 #, c-format msgid "on channel %d id %d\n" msgstr "通道 %d id %d\n" -#: ../../diskdrake/interactive.pm_.c:1175 +#: ../../diskdrake/interactive.pm_.c:1186 msgid "Filesystem encryption key" msgstr "文件系统口令" -#: ../../diskdrake/interactive.pm_.c:1176 +#: ../../diskdrake/interactive.pm_.c:1187 msgid "Choose your filesystem encryption key" msgstr "请选择该文件系统的口令" -#: ../../diskdrake/interactive.pm_.c:1179 +#: ../../diskdrake/interactive.pm_.c:1190 #, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "这个口令太简单了 (至少要有 %d 个字符)" -#: ../../diskdrake/interactive.pm_.c:1180 +#: ../../diskdrake/interactive.pm_.c:1191 msgid "The encryption keys do not match" msgstr "两次口令不符" -#: ../../diskdrake/interactive.pm_.c:1183 +#: ../../diskdrake/interactive.pm_.c:1194 msgid "Encryption key" msgstr "口令" -#: ../../diskdrake/interactive.pm_.c:1184 +#: ../../diskdrake/interactive.pm_.c:1195 msgid "Encryption key (again)" msgstr "口令 (再一次)" @@ -2278,7 +2293,7 @@ msgid "" "Please enter your username, password and domain name to access this host." msgstr "要访问此主机, 请输入您的用户名, 口令和域名" -#: ../../diskdrake/smbnfs_gtk.pm_.c:178 +#: ../../diskdrake/smbnfs_gtk.pm_.c:178 ../../standalone/drakbackup_.c:3527 msgid "Username" msgstr "用户名" @@ -2290,23 +2305,23 @@ msgstr " msgid "Search servers" msgstr "搜索服务器" -#: ../../fs.pm_.c:552 ../../fs.pm_.c:562 ../../fs.pm_.c:566 ../../fs.pm_.c:570 -#: ../../fs.pm_.c:574 ../../fs.pm_.c:578 +#: ../../fs.pm_.c:544 ../../fs.pm_.c:554 ../../fs.pm_.c:558 ../../fs.pm_.c:562 +#: ../../fs.pm_.c:566 ../../fs.pm_.c:570 #, c-format msgid "%s formatting of %s failed" msgstr "%s, 格式化 %s 失败" -#: ../../fs.pm_.c:615 +#: ../../fs.pm_.c:607 #, c-format msgid "I don't know how to format %s in type %s" msgstr "不知道如何格式化 %s 成 %s 类型" -#: ../../fs.pm_.c:687 ../../fs.pm_.c:731 +#: ../../fs.pm_.c:681 ../../fs.pm_.c:724 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "将分区 %s 加载于目录 %s 失败" -#: ../../fs.pm_.c:746 ../../partition_table.pm_.c:602 +#: ../../fs.pm_.c:739 ../../partition_table.pm_.c:598 #, c-format msgid "error unmounting %s: %s" msgstr "卸载 %s 失败: %s" @@ -2323,134 +2338,192 @@ msgstr " msgid "server" msgstr "服务器" -#: ../../fsedit.pm_.c:472 +#: ../../fsedit.pm_.c:240 +#, c-format +msgid "" +"I can't read the partition table of device %s, it's too corrupted for me :(\n" +"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" +"The other solution is to not allow DrakX to modify the partition table.\n" +"(the error is %s)\n" +"\n" +"Do you agree to loose all the partitions?\n" +msgstr "" +"我无法读取设备 %s 的分区表, 这个分区表破坏得太严重了 :(\n" +"我可以尝试清除坏分区 (所有的数据将被清除!) 然后继续.\n" +"另外一个解决办法是禁止 DrakX 修改分区表.\n" +"(错误是 %s)\n" +"\n" +"您同意清除所有分区吗?\n" + +#: ../../fsedit.pm_.c:501 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "您不能把 JFS 用于小于 16 MB 的分区" -#: ../../fsedit.pm_.c:473 +#: ../../fsedit.pm_.c:502 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "您不能把 ReiserFS 用于小于 32 MB 的分区" -#: ../../fsedit.pm_.c:492 +#: ../../fsedit.pm_.c:521 msgid "Mount points must begin with a leading /" msgstr "载入点必需要以 / 为开头" -#: ../../fsedit.pm_.c:493 +#: ../../fsedit.pm_.c:522 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "已经有一个分区的装载点是 %s\n" -#: ../../fsedit.pm_.c:497 +#: ../../fsedit.pm_.c:526 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "不能用LVM逻辑卷做 %s 载入点" -#: ../../fsedit.pm_.c:499 +#: ../../fsedit.pm_.c:528 msgid "This directory should remain within the root filesystem" msgstr "这个目录应该保留在根分区内" -#: ../../fsedit.pm_.c:501 +#: ../../fsedit.pm_.c:530 msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "这个加载点需要一个真正的文件系统(ext2/ext3, reiserfs, xfs 或 jfs)\n" -#: ../../fsedit.pm_.c:503 +#: ../../fsedit.pm_.c:532 #, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "载入点 %s 不能使用用加密的文件系统" -#: ../../fsedit.pm_.c:570 +#: ../../fsedit.pm_.c:599 msgid "Not enough free space for auto-allocating" msgstr "没有足够的空闲空间供自动分配" -#: ../../fsedit.pm_.c:572 +#: ../../fsedit.pm_.c:601 msgid "Nothing to do" msgstr "已完成" -#: ../../fsedit.pm_.c:665 +#: ../../fsedit.pm_.c:694 #, c-format msgid "Error opening %s for writing: %s" msgstr "在打开 %s 写入时发生错误: %s" -#: ../../fsedit.pm_.c:750 +#: ../../harddrake/sound.pm_.c:155 +msgid "No alternative driver" +msgstr "没有替代的驱动程序" + +#: ../../harddrake/sound.pm_.c:156 +#, c-format +msgid "There's no known OSS/ALSA alternative driver for your sound card (%s)" +msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡 (%s) 上" + +#: ../../harddrake/sound.pm_.c:158 +msgid "Sound configuration" +msgstr "声音配置" + +#: ../../harddrake/sound.pm_.c:159 +#, c-format msgid "" -"An error occurred - no valid devices were found on which to create new " -"filesystems. Please check your hardware for the cause of this problem" +"Here you can select an alternative driver (either OSS or ALSA) for your " +"sound card (%s)" msgstr "" -"发生错误! 新建文件系统时找不到可用的设备。\n" -"请检查您的硬件以确定问题的原因 !" +"您可以在这里配置可以用在您的声卡 (%s) 上的替代驱动程序 (可以选择OSS 或 ALSA)" -#: ../../fsedit.pm_.c:773 -msgid "You don't have any partitions!" -msgstr "您现在一个分区也没有!" +#: ../../harddrake/sound.pm_.c:162 +msgid "Driver:" +msgstr "驱动程序:" + +#: ../../harddrake/sound.pm_.c:173 +msgid "No known driver" +msgstr "没有已知驱动程序" + +#: ../../harddrake/sound.pm_.c:174 +#, c-format +msgid "There's no known driver for your sound card (%s)" +msgstr "没有已知的驱动程序可以用在您的声卡 (%s) 上" + +#: ../../harddrake/sound.pm_.c:177 +msgid "Unkown driver" +msgstr "未知的驱动程序" + +#: ../../harddrake/sound.pm_.c:178 +#, c-format +msgid "" +"The \"%s\" driver for your sound card is unlisted\n" +"\n" +"Please send the output of the \"lspcidrake -v\" command to\n" +"\n" +"with subject: unlisted sound driver \"%s\"" +msgstr "" +"您的声卡的 \"%s\" 驱动程序不在列表中\n" +"\n" +"请执行\"lspcidrake -v\" 命令, 把结果发给\n" +"\n" +"标题写: unlisted sound driver \"%s\"" -#: ../../harddrake/ui.pm_.c:15 +#: ../../harddrake/ui.pm_.c:16 msgid "Model" msgstr "型号" -#: ../../harddrake/ui.pm_.c:15 +#: ../../harddrake/ui.pm_.c:16 msgid "hard disk model" msgstr "硬盘型号" -#: ../../harddrake/ui.pm_.c:16 +#: ../../harddrake/ui.pm_.c:17 msgid "Channel" msgstr "通道" -#: ../../harddrake/ui.pm_.c:16 +#: ../../harddrake/ui.pm_.c:17 msgid "EIDE/SCSI channel" msgstr "EIDE/SCSI 通道" -#: ../../harddrake/ui.pm_.c:18 +#: ../../harddrake/ui.pm_.c:19 msgid "Bus" msgstr "总线" -#: ../../harddrake/ui.pm_.c:19 +#: ../../harddrake/ui.pm_.c:20 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "设备所插在的物理总线 (例如: PCI, USB, ...)" -#: ../../harddrake/ui.pm_.c:20 +#: ../../harddrake/ui.pm_.c:21 msgid "Module" msgstr "模块" -#: ../../harddrake/ui.pm_.c:20 +#: ../../harddrake/ui.pm_.c:21 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "管理该设备的 GNU/Linux 内核模块" -#: ../../harddrake/ui.pm_.c:21 +#: ../../harddrake/ui.pm_.c:22 msgid "Media class" msgstr "介质分类" -#: ../../harddrake/ui.pm_.c:21 +#: ../../harddrake/ui.pm_.c:22 msgid "class of hardware device" msgstr "硬件设备的分类" -#: ../../harddrake/ui.pm_.c:22 ../../printerdrake.pm_.c:1404 +#: ../../harddrake/ui.pm_.c:23 ../../printerdrake.pm_.c:1517 msgid "Description" msgstr "描述" -#: ../../harddrake/ui.pm_.c:22 +#: ../../harddrake/ui.pm_.c:23 msgid "this field describe the device" msgstr "设备的描述" -#: ../../harddrake/ui.pm_.c:24 +#: ../../harddrake/ui.pm_.c:25 msgid "Bus identification" msgstr "总线标识" -#: ../../harddrake/ui.pm_.c:25 +#: ../../harddrake/ui.pm_.c:26 msgid "" -"- PCI and USB devices : this list the vendor, device, subvendor and " -"subdevice PCI/USB ids" +"- PCI and USB devices: this list the vendor, device, subvendor and subdevice " +"PCI/USB ids" msgstr "" "- PCI 和 USB 设备 :列出 PCI/USB 的 vendor, device, subvendor 和 subdevice 代" "码" -#: ../../harddrake/ui.pm_.c:27 +#: ../../harddrake/ui.pm_.c:28 msgid "Location on the bus" msgstr "在总线上的位置" -#: ../../harddrake/ui.pm_.c:28 +#: ../../harddrake/ui.pm_.c:29 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" @@ -2460,48 +2533,56 @@ msgstr "" "- eide 设备: 主设备或从设备\n" "- scsi 设备: 列出 scsi 总线和 scsi 设备号" -#: ../../harddrake/ui.pm_.c:31 +#: ../../harddrake/ui.pm_.c:32 msgid "Old device file" msgstr "旧的设备文件" -#: ../../harddrake/ui.pm_.c:32 +#: ../../harddrake/ui.pm_.c:33 msgid "old static device name used in dev package" msgstr "dev 软件包中使用的旧的静态设备名" -#: ../../harddrake/ui.pm_.c:33 +#: ../../harddrake/ui.pm_.c:34 msgid "New devfs device" msgstr "新的 devfs 设备" -#: ../../harddrake/ui.pm_.c:34 +#: ../../harddrake/ui.pm_.c:35 msgid "new dinamic device name generated by incore kernel devfs" msgstr "内核自代的 devfs 中使用的新的动态设备名" -#: ../../harddrake/ui.pm_.c:35 +#: ../../harddrake/ui.pm_.c:36 msgid "Number of buttons" msgstr "按键数目" -#: ../../harddrake/ui.pm_.c:36 +#: ../../harddrake/ui.pm_.c:37 msgid "the vendor name of the device" msgstr "设备的厂家名称" -#: ../../harddrake/ui.pm_.c:60 +#: ../../harddrake/ui.pm_.c:38 +msgid "Alternative drivers" +msgstr "替代的驱动程序" + +#: ../../harddrake/ui.pm_.c:39 +msgid "the list of alternative drivers for this sound card" +msgstr "这个声卡的替代驱动程序列表" + +#: ../../harddrake/ui.pm_.c:63 msgid "/_Quit" msgstr "_Q 结束" -#: ../../harddrake/ui.pm_.c:61 ../../harddrake/ui.pm_.c:62 -#: ../../harddrake/ui.pm_.c:68 ../../standalone/logdrake_.c:110 +#: ../../harddrake/ui.pm_.c:64 ../../harddrake/ui.pm_.c:65 +#: ../../harddrake/ui.pm_.c:71 ../../standalone/logdrake_.c:110 msgid "/_Help" msgstr "/_H 帮助" -#: ../../harddrake/ui.pm_.c:62 +#: ../../harddrake/ui.pm_.c:65 msgid "/_Help..." msgstr "/_H 帮助..." -#: ../../harddrake/ui.pm_.c:63 +#: ../../harddrake/ui.pm_.c:66 msgid "Harddrake help" msgstr "Harddrake 帮助" -#: ../../harddrake/ui.pm_.c:64 +#: ../../harddrake/ui.pm_.c:67 msgid "" "Description of the fields:\n" "\n" @@ -2509,15 +2590,15 @@ msgstr "" "各个字段的描述:\n" "\n" -#: ../../harddrake/ui.pm_.c:68 +#: ../../harddrake/ui.pm_.c:71 msgid "/_About..." msgstr "/_A 关于..." -#: ../../harddrake/ui.pm_.c:69 +#: ../../harddrake/ui.pm_.c:72 msgid "About Harddrake" msgstr "关于 Harddrake魔力硬件配置" -#: ../../harddrake/ui.pm_.c:70 +#: ../../harddrake/ui.pm_.c:73 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" @@ -2525,51 +2606,51 @@ msgstr "" "这是 Harddrake魔力硬件配置, Mandrake 的硬件配置工具.\n" "版本 :" -#: ../../harddrake/ui.pm_.c:71 +#: ../../harddrake/ui.pm_.c:74 msgid "Author:" msgstr "作者 :" -#: ../../harddrake/ui.pm_.c:83 +#: ../../harddrake/ui.pm_.c:86 msgid "Harddrake2 version " msgstr "Harddrake2 版本 " -#: ../../harddrake/ui.pm_.c:91 +#: ../../harddrake/ui.pm_.c:103 msgid "Detected hardware" msgstr "检测到的硬件" -#: ../../harddrake/ui.pm_.c:92 +#: ../../harddrake/ui.pm_.c:105 +msgid "Information" +msgstr "信息" + +#: ../../harddrake/ui.pm_.c:108 msgid "Configure module" msgstr "配置模块" -#: ../../harddrake/ui.pm_.c:92 -msgid "Informations" -msgstr "信息" - -#: ../../harddrake/ui.pm_.c:92 +#: ../../harddrake/ui.pm_.c:109 msgid "Run config tool" msgstr "运行配置工具" -#: ../../harddrake/ui.pm_.c:96 +#: ../../harddrake/ui.pm_.c:113 msgid "Detection in progress" msgstr "检测进行中" -#: ../../harddrake/ui.pm_.c:96 ../../interactive.pm_.c:388 +#: ../../harddrake/ui.pm_.c:113 ../../interactive.pm_.c:391 msgid "Please wait" msgstr "请稍候" -#: ../../harddrake/ui.pm_.c:139 +#: ../../harddrake/ui.pm_.c:156 msgid "primary" msgstr "主" -#: ../../harddrake/ui.pm_.c:139 +#: ../../harddrake/ui.pm_.c:156 msgid "secondary" msgstr "次" -#: ../../harddrake/ui.pm_.c:176 +#: ../../harddrake/ui.pm_.c:197 msgid "You can configure each parameter of the module here." msgstr "您可以配置模块的各个参数" -#: ../../harddrake/ui.pm_.c:192 +#: ../../harddrake/ui.pm_.c:213 #, c-format msgid "Running \"%s\" ..." msgstr "正在运行 \"%s\" ..." @@ -2602,15 +2683,15 @@ msgstr "" "时才设置电视卡参数" #: ../../harddrake/v4l.pm_.c:213 -msgid "Card model :" +msgid "Card model:" msgstr "卡的型号 :" #: ../../harddrake/v4l.pm_.c:214 -msgid "Tuner type :" +msgid "Tuner type:" msgstr "调协器类型 :" #: ../../harddrake/v4l.pm_.c:215 -msgid "Number of capture buffers :" +msgid "Number of capture buffers:" msgstr "捕获缓冲区数量 :" #: ../../harddrake/v4l.pm_.c:215 @@ -2618,11 +2699,11 @@ msgid "number of capture buffers for mmap'ed capture" msgstr "用于mmap捕获的缓冲区数量 :" #: ../../harddrake/v4l.pm_.c:217 -msgid "PLL setting :" +msgid "PLL setting:" msgstr "PLL 设置 :" #: ../../harddrake/v4l.pm_.c:218 -msgid "Radio support :" +msgid "Radio support:" msgstr "无线电支持 :" #: ../../harddrake/v4l.pm_.c:218 @@ -2634,22 +2715,22 @@ msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" -"you will add here will not be entitled to change anything except their own\n" -"files and their own configuration. You will have to create at least one\n" -"regular user for yourself. That account is where you should log in for\n" -"routine use. Although it is very practical to log in as \"root\" everyday,\n" -"it may also be very dangerous! The slightest mistake could mean that your\n" -"system would not work any more. If you make a serious mistake as a regular\n" -"user, you may only lose some information, but not the entire system.\n" +"you add here will not be entitled to change anything except their own files\n" +"and their own configuration. You will have to create at least one regular\n" +"user for yourself. That account is where you should log in for routine use.\n" +"Although it is very practical to log in as \"root\" everyday, it may also\n" +"be very dangerous! The slightest mistake could mean that your system would\n" +"not work any more. If you make a serious mistake as a regular user, you may\n" +"only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" -"non-privileged (regular) user's password is not as crucial as \"root\"' one\n" -"from a security point of view, but that is no reason to neglect it: after\n" -"all, your files are at risk.\n" +"non-privileged (regular) user's password is not as crucial as the \"root\"'\n" +"one from a security point of view, but that is no reason to neglect it:\n" +"after all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" @@ -2761,7 +2842,7 @@ msgid "" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" -"text about that group. If you deselect all groups when performing a regular\n" +"text about that group. If you unselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" @@ -2822,10 +2903,10 @@ msgstr "" #: ../../help.pm_.c:128 msgid "" -"Finally, depending on whether or not you selected individual packages, you\n" -"will be presented a tree containing all packages classified by groups and\n" -"subgroups. While browsing the tree, you can select entire groups,\n" -"subgroups, or individual packages.\n" +"Finally, depending on whether or not you chose to be able to select\n" +"individual packages, you will be presented a tree containing all packages\n" +"classified by groups and subgroups. While browsing the tree, you can select\n" +"entire groups, subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" @@ -2885,11 +2966,11 @@ msgstr "" #: ../../help.pm_.c:164 msgid "" -"You are now proposed to set up your Internet/network connection. If you\n" -"wish to connect your computer to the Internet or to a local network, click\n" -"\"OK\". The autodetection of network devices and modem will be launched. If\n" -"this detection fails, uncheck the \"Use auto detection\" box next time. You\n" -"may also choose not to configure the network, or do it later; in that case,\n" +"You are now able to set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click \"OK\".\n" +"The autodetection of network devices and modem will be launched. If this\n" +"detection fails, uncheck the \"Use auto detection\" box next time. You may\n" +"also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" @@ -2959,7 +3040,7 @@ msgstr "" msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" -"to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" +"to deactivate this by unselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" @@ -2998,7 +3079,9 @@ msgid "" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" -"after 10 seconds, restoring the screen." +"after 10 seconds, restoring the screen. Refer then to the Video\n" +"configuration section of the user guide for more information on how to\n" +"configure your display." msgstr "" "X (窗口系统) 是 GNU/Linux 的图形界面的中心, Mandrake Linux 的各种\n" "图形环境(KDE, GNOME, AfterStep, WindowMaker, 等等.)都依靠它.\n" @@ -3013,27 +3096,7 @@ msgstr "" "如果您可以看到测试的提问, 并回答 \"是\", DrakX 会进入下一步.\n" "如果您不能看到提问, 显然配置有错误, 测试会在 10 秒钟后结束并恢复显示." -#: ../../help.pm_.c:237 -msgid "" -"The first time you try the X configuration, you may not be very satisfied\n" -"with its display (screen is too small, shifted left or right...). Hence,\n" -"even if X starts up correctly, DrakX then asks you if the configuration\n" -"suits you. It will also propose to change it by displaying a list of valid\n" -"modes it could find, asking you to select one.\n" -"\n" -"As a last resort, if you still cannot get X to work, choose \"Change\n" -"graphics card\", select \"Unlisted card\", and when prompted on which\n" -"server, choose \"FBDev\". This is a failsafe option which works with any\n" -"modern graphics card. Then choose \"Test again\" to be sure." -msgstr "" -"自动检测的结果未必总令您满意(屏幕太小, 偏左或偏右...), 所以\n" -"DrakX 会问您配置是否合适. 它还可以列出所有可用的显示模式请您选择.\n" -"\n" -"最后,如果 DrakX 仍然无法正确配置, 你可在\n" -"\"改变图形卡\",选择\"其它卡\", 再选择\"FBDev\", \n" -"这个可以保证在所有现代图形卡上工作. 选择\"重新测试\"来确认." - -#: ../../help.pm_.c:249 +#: ../../help.pm_.c:239 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" @@ -3045,7 +3108,7 @@ msgstr "" "问题\n" "显然, 如果这个机器将作为服务器, 或者您的显示配置还没有成功, 您应该选择\"否\"." -#: ../../help.pm_.c:256 +#: ../../help.pm_.c:246 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" @@ -3065,29 +3128,30 @@ msgid "" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" -"When you click on this step, you will be asked to enter a disk inside the\n" -"drive. The floppy disk you will insert must be empty or contain data which\n" -"you do not need. You will not have to format it since DrakX will rewrite\n" -"the whole disk." +"If you say \"Yes\", you will be asked to enter a disk inside the drive. The\n" +"floppy disk you will insert must be empty or contain data which you do not\n" +"need. You will not have to format it since DrakX will rewrite the whole\n" +"disk." msgstr "" "Mandrake Linux CD-ROM 有内置的急救功能. 如果您用光盘起动机器,\n" "在开机画面按 >>F1<< 键, 然后在提示处输入 >>rescue<<, 就会进入急救模式.\n" -"如果您的机器不能从光盘起动, CD-ROM, 至少有两种情况您可以回到这一步得到帮助:\n" +"万一您的机器不能从光盘起动, 至少有两种情况 您可以回到这一步得到帮助:\n" "\n" " * 在安装开机引导程序时, DrakX 会重写您的主硬盘的主引导记录(MBR)\n" -"(除非您不安装新的开机引导程序). 假设您的电脑也安装了Windows, 而某天您需要\n" -"重新安装 Windows, Microsoft 的安装程序清除了主引导记录, \n" -"结果您无法进入 GNU/Linux!\n" +"(除非您使用其它开机引导程序) 以便您选择要启动的操作系统(假设您的\n" +"电脑也安装了其他操作系统), 万一某天您需要重新安装 Windows,\n" +"Microsoft 的安装程序会清除主引导记录, 结果您将无法进入 GNU/Linux!\n" "\n" -" * 假如出了什么问题, 您的 GNU/Linux 从硬盘起动, 这个引导软盘是您进入 GNU/" -"Linux 的唯一途径.\n" -"它包含了各种有用的工具, 可以修复因为停电, 忘记口令, 不幸的错误命令等等原因造" -"成的\n" -"系统崩溃.\n" +" * 假如出了什么问题, 您的 GNU/Linux 无法从硬盘起动, \n" +"这个引导软盘是您启动 GNU/Linux 的唯一途径.\n" +"它包含了各种有用的工具, 可以修复因为停电, 忘记口令,\n" +"不幸的错误命令, 口令中的打字错误等等原因造成的系统崩溃.\n" "\n" -"您需要准备一张空的软盘, DrakX 会重写整个盘片, 所以不必事先格式化." +"如果您选择\"是\", 会提示您在软盘驱动器中放一片软盘. \n" +"您使用的软盘必须是空的或者您不再需要上面的数据.\n" +"DrakX 会重写整个盘片, 所以您不必事先格式化." -#: ../../help.pm_.c:280 +#: ../../help.pm_.c:270 msgid "" "At this point, you need to choose where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" @@ -3120,7 +3184,9 @@ msgid "" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" -"option;\n" +"option. You will then be asked to choose the mount points associated to\n" +"each of the partitions. The legacy mount points are selected by default,\n" +"and you should generally keep them.\n" "\n" " * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" "is installed on your hard drive and takes all the space available on it,\n" @@ -3153,7 +3219,9 @@ msgid "" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" -"know what you are doing." +"know what you are doing. To know how do use the DiskDrake utility used\n" +"here, refer to the section ``Managing Your Partitions'' of the ````User\n" +"Guide''''" msgstr "" "这里, 您需要在硬盘上选择用来安装 Mandrake Linux 操作系统的位置.\n" "如果磁盘是空的, 或者现存的操作系统使用了磁盘上的全部空间, 您需要\n" @@ -3202,7 +3270,7 @@ msgstr "" " 开始之前请仔细考虑. 这个方法非常有力也非常危险.\n" " 您可能轻易的毁坏所有的数据. 如果您不清楚请不要使用它.." -#: ../../help.pm_.c:347 +#: ../../help.pm_.c:341 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" @@ -3257,7 +3325,7 @@ msgstr "" "(*) 您需要 FAT 格式化的软盘 (要在 GNU/Linux 下面制作, 输入命令\n" "\"mformat a:\")" -#: ../../help.pm_.c:378 +#: ../../help.pm_.c:372 msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem).\n" @@ -3298,7 +3366,7 @@ msgstr "" "\n" "点击\"取消\"选择其他分区安装 Mandrake Linux 系统." -#: ../../help.pm_.c:404 +#: ../../help.pm_.c:398 msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" @@ -3313,12 +3381,12 @@ msgstr "" "\n" "请耐心等待." -#: ../../help.pm_.c:412 +#: ../../help.pm_.c:406 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" -"updates, you are now proposed to download them from the Internet. Choose\n" +"updates, you are now able to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" @@ -3338,7 +3406,7 @@ msgstr "" "之后会出现一个可以下载的软件包清单: 检查选项然后点击 \"安装\" 来获取\n" "并安装选中的软件包, 也停止请选择\"取消\"." -#: ../../help.pm_.c:425 +#: ../../help.pm_.c:419 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" @@ -3351,14 +3419,14 @@ msgstr "" "全部条款, 请点击 \"拒绝\" 按钮, 安装过程将立即停止. \n" "点击\"接受\" 按钮将继续安装." -#: ../../help.pm_.c:432 +#: ../../help.pm_.c:426 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" -"easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" -"to get more information about the meaning of these levels.\n" +"ease of use. Refer to the \"msec\" chapter of the ``Reference Manual'' to\n" +"get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" @@ -3370,7 +3438,7 @@ msgstr "" "\n" "没有特别需要就采用缺省设置." -#: ../../help.pm_.c:442 +#: ../../help.pm_.c:436 msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" @@ -3387,26 +3455,26 @@ msgid "" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" -" * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" -"and swap partitions in free space of your hard drive;\n" +" * \"Auto allocate\": this option enables to automatically create ext3 and\n" +"swap partitions in free space of your hard drive;\n" "\n" -" * \"More\": gives access to additional features:\n" +"\"More\": gives access to additional features:\n" "\n" -" * \"Save partition table\": saves the partition table to a floppy.\n" -"Useful for later partition-table recovery if necessary. It is strongly\n" -"recommended to perform this step;\n" +" * \"Save partition table\": saves the partition table to a floppy. Useful\n" +"for later partition-table recovery if necessary. It is strongly recommended\n" +"to perform this step;\n" "\n" -" * \"Restore partition table\": allows to restore a previously saved\n" +" * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" -" * \"Rescue partition table\": if your partition table is damaged, you\n" -"can try to recover it using this option. Please be careful and remember\n" -"that it can fail;\n" +" * \"Rescue partition table\": if your partition table is damaged, you can\n" +"try to recover it using this option. Please be careful and remember that it\n" +"can fail;\n" "\n" -" * \"Reload partition table\": discards all changes and loads your\n" -"initial partition table;\n" +" * \"Reload partition table\": discards all changes and loads your initial\n" +"partition table;\n" "\n" -" * \"Removable media automounting\": unchecking this option will force\n" +" * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" @@ -3434,7 +3502,7 @@ msgid "" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" -"read the ext2fs chapter from the ``Reference Manual''.\n" +"read the ext2FS chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" @@ -3498,7 +3566,7 @@ msgstr "" "1MB, 它将用于安装开机程序 yaboot. 如果您想让这个分区更大一些, 比如 50MB, \n" "您会发现这里很适合存放紧急起动时会用到的备用内核, 以及 ramdisk 镜像." -#: ../../help.pm_.c:513 +#: ../../help.pm_.c:507 msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" @@ -3536,34 +3604,34 @@ msgstr "" "\n" "分区按 \"Linux 名称\", \"Windows 名称\", \"容量\"列表." -#: ../../help.pm_.c:544 +#: ../../help.pm_.c:538 msgid "Please be patient. This operation can take several minutes." msgstr "请耐心等待. 该操作可能花好几分钟." -#: ../../help.pm_.c:547 +#: ../../help.pm_.c:541 msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" -" * \"Install\": completely wipes out the old system. In fact, depending on\n" -"what currently holds your machine, you will be able to keep some old (Linux\n" -"or other) partitions unchanged;\n" +" * \"Install\": completely wipes out the old system, however, depending on\n" +"what is currently installed on your machine, you may be able to keep some\n" +"old partitions (Linux or otherwise) unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps the\n" "current partitions of your hard drives as well as user configurations. All\n" -"other configuration steps remain available with respect to plain\n" +"other configuration steps remain available, similar to a normal\n" "installation;\n" "\n" -" * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" -"existing Mandrake Linux system while keeping all system configurations\n" -"unchanged. Adding new packages to the current installation is also\n" -"possible.\n" +" * \"Upgrade Packages Only\": this new installation class allows you to\n" +"upgrade an existing Mandrake Linux system while keeping all system\n" +"configurations unchanged. Adding new packages to the current installation\n" +"is also possible.\n" "\n" -"Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" -"release.\n" +"Upgrades should work fine on Mandrake Linux systems containing version\n" +"\"8.1\" or later.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" @@ -3572,11 +3640,11 @@ msgid "" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" -" * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" -"installation class. The expert installation will allow you to perform a\n" -"highly-customized installation. Answering some of the questions can be\n" -"difficult if you do not have a good knowledge of GNU/Linux, so do not\n" -"choose this unless you know what you are doing." +" * Expert: if you have a good understanding of GNU/Linux, you may wish to\n" +"perform a highly customized installation. Some of the decisions you will\n" +"have to make may be difficult if you do not have good knowledge of\n" +"GNU/Linux, so it is not recommended that those without a fair amount of\n" +"experience select this installation class." msgstr "" "DrakX 现在需要知道你选择缺省的(\"建议\")安装还是愿意自己控制局面(\"专家\").\n" "您还可以选择做全新安装, 或者升级一个现有的 Mandrake Linux 系统.\n" @@ -3604,27 +3672,32 @@ msgstr "" " 的了解, 您将很难回答某些问题. 所以, 如果您不清楚会发生什么, 请不要选择这个级" "别." -#: ../../help.pm_.c:584 +#: ../../help.pm_.c:578 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" -"language you have chosen) and you won't even see this step. However, you\n" -"might not have a keyboard that corresponds exactly to your language: for\n" -"example, if you are an English speaking Swiss person, you may still want\n" -"your keyboard to be a Swiss keyboard. Or if you speak English but are\n" -"located in Quebec, you may find yourself in the same situation. In both\n" -"cases, you will have to go back to this installation step and select an\n" -"appropriate keyboard from the list.\n" +"language you have chosen). However, you might not have a keyboard that\n" +"corresponds exactly to your language: for example, if you are an English\n" +"speaking Swiss person, you may still want your keyboard to be a Swiss\n" +"keyboard. Or if you speak English but are located in Quebec, you may find\n" +"yourself in the same situation. In both cases, you will have to go back to\n" +"this installation step and select an appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" -"supported keyboards." +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-latin alphabet, you will be\n" +"asked on next dialog to choose the key binding that will switch the\n" +"keyboard layout between the latin and non latin layouts." msgstr "" "通常, DrakX 根据您选择的语言选择配置合适的键盘. \n" "如果您的键盘并不严格符合语言的要求, 您可以从列表中选择需要的键盘.\n" "\n" "点击 \"更多\" 按钮将列出所有支持的键盘." -#: ../../help.pm_.c:597 +#: ../../help.pm_.c:594 msgid "" +"The first step is to choose your preferred language.\n" +"\n" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" @@ -3645,7 +3718,7 @@ msgstr "" "\n" "您可以选择多种附加的语言和地区设置, 点击\"确认\" 继续." -#: ../../help.pm_.c:610 +#: ../../help.pm_.c:609 msgid "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" @@ -3658,7 +3731,14 @@ msgid "" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" -"to \"Cancel\" and choose again." +"to \"Cancel\" and choose again.\n" +"\n" +"Wheel mouses are sometimes not automatically detected. You will need to\n" +"manually select it in the list. Be sure to select the one corresponding to\n" +"the correct port it is attached to. After you have pressed the \"OK\"\n" +"button, a mouse image is displayed. You then need to move the wheel of your\n" +"mouse to activate it correctly. Then test all buttons and movements are\n" +"correct." msgstr "" "DrakX 通常能检测您的鼠标有多少按键. 如果没有检测到, 它假设您有两键鼠标,\n" "并设置模拟第三键. DrakX 会自动分辨 PS/2, 串口, 或 USB 鼠标.\n" @@ -3668,7 +3748,7 @@ msgstr "" "如果您选择的不是缺省设置, 会出现测试窗口, 您可以按各个按键和滚轮, 确认\n" "设置正确, 如果鼠标不正常工作, 按空格键或 [Return] 可以 \"取消\" 然后重新选择." -#: ../../help.pm_.c:624 +#: ../../help.pm_.c:630 msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." @@ -3676,7 +3756,7 @@ msgstr "" "请选择正确的端口. 例如, \n" "MS Windows 里的 COM1, 在 GNU/Linux 里面叫做 ttyS0." -#: ../../help.pm_.c:628 +#: ../../help.pm_.c:634 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" @@ -3706,9 +3786,9 @@ msgid "" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" -"If your network uses the LDAP (or NIS) protocol for authentication, select\n" -"\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" -"network administrator.\n" +"If your network uses either of the LDAP, NIS, or PDC Windows Domain\n" +"authentication services, select the appropriate one as \"authentication\".\n" +"If you do not know, ask your network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." @@ -3747,7 +3827,7 @@ msgstr "" "如果您的电脑没有和网络连接, 您可以选择\n" "使用 \"本地文件\" 认证." -#: ../../help.pm_.c:664 +#: ../../help.pm_.c:670 msgid "" "LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" @@ -3786,16 +3866,7 @@ msgid "" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" -"options, which are reserved to the expert user.\n" -"\n" -"After you have configured the general bootloader parameters, the list of\n" -"boot options which will be available at boot time will be displayed.\n" -"\n" -"If there is another operating system installed on your machine, it will\n" -"automatically be added to the boot menu. Here, you can choose to fine-tune\n" -"the existing options. Select an entry and click \"Modify\" to modify or\n" -"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" -"installation step." +"options, which are reserved for the expert user." msgstr "" "LILO 和 grub 是 GNU/Linux 开机引导程序. 这个步骤通常是\n" "全自动的. DrakX 会分析磁盘的引导扇区, 并根据\n" @@ -3845,13 +3916,16 @@ msgstr "" "\"添加\" 创建一个新条目; 而\"完成\" 将进入\n" "下一个安装步骤." -#: ../../help.pm_.c:713 +#: ../../help.pm_.c:710 msgid "" -"LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n" -"either GNU/Linux or any other operating system present on your computer.\n" -"Normally, these other operating systems are correctly detected and\n" -"installed. If this is not the case, you can add an entry by hand in this\n" -"screen. Be careful to choose the correct parameters.\n" +"After you have configured the general bootloader parameters, the list of\n" +"boot options which will be available at boot time will be displayed.\n" +"\n" +"If there is another operating system installed on your machine, it will\n" +"automatically be added to the boot menu. Here, you can choose to fine-tune\n" +"the existing options. Select an entry and click \"Modify\" to modify or\n" +"remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" +"installation step.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" @@ -3937,18 +4011,18 @@ msgstr "" #: ../../help.pm_.c:759 msgid "" -"DrakX now detects any IDE device present in your computer. It will also\n" -"scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" +"DrakX now detects any IDE devices present in your computer. It will also\n" +"scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" -"be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" -"no SCSI hardware. If you are unsure, you can check the list of hardware\n" -"detected in your machine by selecting \"See hardware info\" and clicking\n" -"\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" -"return to the SCSI interface question.\n" +"be presented with a list of SCSI cards to choose from. Click \"No\" if you\n" +"have no SCSI hardware. If you are unsure, you can check the list of\n" +"hardware detected in your machine by selecting \"See hardware info\" and\n" +"clicking \"OK\". Examine the list of hardware and then click on the \"OK\"\n" +"button to return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" @@ -4151,7 +4225,9 @@ msgid "" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" -"configuration wizard;\n" +"configuration wizard. Consult the corresponding chapter of the ``User\n" +"Guide'' for more information on how to setup a new printer. The interface\n" +"presented there is similar to the one used during installation;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" @@ -4191,7 +4267,7 @@ msgstr "" "它会在这里显示. 您可以点击按钮, \n" "修改与它有关的参数." -#: ../../help.pm_.c:894 +#: ../../help.pm_.c:896 msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" @@ -4200,7 +4276,7 @@ msgstr "" "选择硬盘您准备清空来安装 Mandrake分区.\n" "注意，所有数据将丢失并且无法恢复." -#: ../../help.pm_.c:899 +#: ../../help.pm_.c:901 msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" @@ -4231,7 +4307,7 @@ msgstr "" msgid "You must also format %s" msgstr "您还必须格式化 %s" -#: ../../install_any.pm_.c:418 +#: ../../install_any.pm_.c:423 #, c-format msgid "" "You have selected the following server(s): %s\n" @@ -4254,30 +4330,51 @@ msgstr "" "\n" "果真安装这些服务?\n" -#: ../../install_any.pm_.c:453 +#: ../../install_any.pm_.c:441 +#, c-format +msgid "" +"The following packages will be removed to allow upgrading your system: %s\n" +"\n" +"\n" +"Do you really want to remove these packages?\n" +msgstr "" +"为了能升级您的系统, 将要删除下列的软件包: %s\n" +"\n" +"\n" +"您确定要删除这些软件包吗?\n" + +#: ../../install_any.pm_.c:471 msgid "Can't use broadcast with no NIS domain" msgstr "没有NIS域， 无法使用广播" -#: ../../install_any.pm_.c:841 +#: ../../install_any.pm_.c:862 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "请插入一张DOS软盘到驱动器 %s" -#: ../../install_any.pm_.c:845 +#: ../../install_any.pm_.c:866 msgid "This floppy is not FAT formatted" msgstr "不是DOS格式的软盘" -#: ../../install_any.pm_.c:857 +#: ../../install_any.pm_.c:878 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "使用保存的软件包选择, 以''linux defcfg=floppy''启动" -#: ../../install_any.pm_.c:880 ../../partition_table.pm_.c:771 +#: ../../install_any.pm_.c:901 ../../partition_table.pm_.c:767 #, c-format msgid "Error reading file %s" msgstr "请取文件 %s 出错 " +#: ../../install_any.pm_.c:1023 +msgid "" +"An error occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" +msgstr "" +"发生错误! 新建文件系统时找不到可用的设备。\n" +"请检查您的硬件以确定问题的原因 !" + #: ../../install_interactive.pm_.c:23 #, c-format msgid "" @@ -4311,59 +4408,59 @@ msgstr "" "\n" "要继续吗?" -#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:168 +#: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:169 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "您必须有一个FAT分区 载入 /boot/efi" -#: ../../install_interactive.pm_.c:91 +#: ../../install_interactive.pm_.c:92 msgid "Use free space" msgstr "使用空闲空间" -#: ../../install_interactive.pm_.c:93 +#: ../../install_interactive.pm_.c:94 msgid "Not enough free space to allocate new partitions" msgstr "没有足够空闲空间分配给新分区" -#: ../../install_interactive.pm_.c:101 +#: ../../install_interactive.pm_.c:102 msgid "Use existing partitions" msgstr "使用现存的分区" -#: ../../install_interactive.pm_.c:103 +#: ../../install_interactive.pm_.c:104 msgid "There is no existing partition to use" msgstr "现存的分区无法使用" -#: ../../install_interactive.pm_.c:110 +#: ../../install_interactive.pm_.c:111 msgid "Use the Windows partition for loopback" msgstr "利用 Windows 分区进行回送" -#: ../../install_interactive.pm_.c:113 +#: ../../install_interactive.pm_.c:114 msgid "Which partition do you want to use for Linux4Win?" msgstr "请问您要在哪一个分区里放 Linux4Win?" -#: ../../install_interactive.pm_.c:115 +#: ../../install_interactive.pm_.c:116 msgid "Choose the sizes" msgstr "选择大小" -#: ../../install_interactive.pm_.c:116 +#: ../../install_interactive.pm_.c:117 msgid "Root partition size in MB: " msgstr "根分区大小(MB): " -#: ../../install_interactive.pm_.c:117 +#: ../../install_interactive.pm_.c:118 msgid "Swap partition size in MB: " msgstr "交换分区大小 (MB): " -#: ../../install_interactive.pm_.c:126 +#: ../../install_interactive.pm_.c:128 msgid "Use the free space on the Windows partition" msgstr "使用在 Windows 分区上的空闲空间" -#: ../../install_interactive.pm_.c:129 +#: ../../install_interactive.pm_.c:131 msgid "Which partition do you want to resize?" msgstr "您需要改变哪个分区的大小?" -#: ../../install_interactive.pm_.c:131 +#: ../../install_interactive.pm_.c:133 msgid "Resizing Windows partition" msgstr "计算 Windows 文件系统的边界" -#: ../../install_interactive.pm_.c:134 +#: ../../install_interactive.pm_.c:136 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" @@ -4372,7 +4469,7 @@ msgstr "" "改变 FAT 分区大小的程序无法处理这个分区, \n" "发生了如下错误: %s" -#: ../../install_interactive.pm_.c:137 +#: ../../install_interactive.pm_.c:139 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " @@ -4381,7 +4478,7 @@ msgstr "" "您的 Windows 分区有太多碎片, 请重新起动, 进入 Windows, 运行 ``defrag''然后重" "新开始安装 Mandrake Linux" -#: ../../install_interactive.pm_.c:138 +#: ../../install_interactive.pm_.c:140 msgid "" "WARNING!\n" "\n" @@ -4399,52 +4496,52 @@ msgstr "" "准备, 然后重新开始安装.\n" "一切就绪后, 请按 \"确定\"." -#: ../../install_interactive.pm_.c:148 +#: ../../install_interactive.pm_.c:150 msgid "Which size do you want to keep for Windows on" msgstr "您将保留多少空间给 windows?" -#: ../../install_interactive.pm_.c:149 +#: ../../install_interactive.pm_.c:151 #, c-format msgid "partition %s" msgstr "分区 %s" -#: ../../install_interactive.pm_.c:156 +#: ../../install_interactive.pm_.c:158 #, c-format msgid "FAT resizing failed: %s" msgstr "自动调整大小失败: %s" -#: ../../install_interactive.pm_.c:171 +#: ../../install_interactive.pm_.c:173 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "没有可以调整大小或者用作回环的 FAT 分区 (或者没有足够剩余空间)" -#: ../../install_interactive.pm_.c:177 +#: ../../install_interactive.pm_.c:179 msgid "Erase entire disk" msgstr "清除整个磁盘" -#: ../../install_interactive.pm_.c:177 +#: ../../install_interactive.pm_.c:179 msgid "Remove Windows(TM)" msgstr "删除 Windows(TM)" -#: ../../install_interactive.pm_.c:180 +#: ../../install_interactive.pm_.c:182 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "您有不只一个硬盘, 您要在哪个上面安装 Linux?" -#: ../../install_interactive.pm_.c:183 +#: ../../install_interactive.pm_.c:185 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "磁盘 %s 上现存的所有分区及其资料将被清除" -#: ../../install_interactive.pm_.c:191 +#: ../../install_interactive.pm_.c:193 msgid "Custom disk partitioning" msgstr "定制分区" -#: ../../install_interactive.pm_.c:195 +#: ../../install_interactive.pm_.c:197 msgid "Use fdisk" msgstr "使用 fdisk" -#: ../../install_interactive.pm_.c:198 +#: ../../install_interactive.pm_.c:200 #, c-format msgid "" "You can now partition %s.\n" @@ -4453,28 +4550,28 @@ msgstr "" "您现在可以在 %s 上做分区\n" "做完之后, 不要忘记用 `w' 命令保存您的修改" -#: ../../install_interactive.pm_.c:227 +#: ../../install_interactive.pm_.c:229 msgid "You don't have enough free space on your Windows partition" msgstr "在 Windows 分区上没有足够的空闲空间" -#: ../../install_interactive.pm_.c:243 +#: ../../install_interactive.pm_.c:245 msgid "I can't find any room for installing" msgstr "我无法找到安装需要的空间" -#: ../../install_interactive.pm_.c:246 +#: ../../install_interactive.pm_.c:248 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "DrakX 分区大师建议这些解决办法:" -#: ../../install_interactive.pm_.c:250 +#: ../../install_interactive.pm_.c:252 #, c-format msgid "Partitioning failed: %s" msgstr "分区失败: %s" -#: ../../install_interactive.pm_.c:260 +#: ../../install_interactive.pm_.c:262 msgid "Bringing up the network" msgstr "网络正在启动" -#: ../../install_interactive.pm_.c:265 +#: ../../install_interactive.pm_.c:267 msgid "Bringing down the network" msgstr "正在禁用网络功能" @@ -4486,12 +4583,12 @@ msgstr "" "发生错误, 可是我不知道该怎样处理才好.\n" "继续下去会怎样就看您的运气了." -#: ../../install_steps.pm_.c:210 +#: ../../install_steps.pm_.c:211 #, c-format msgid "Duplicate mount point %s" msgstr "重复的装载点 %s" -#: ../../install_steps.pm_.c:379 +#: ../../install_steps.pm_.c:380 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" @@ -4502,12 +4599,12 @@ msgstr "" "请在一台安装好的电脑上检查光盘, 命令是\n" "\"rpm -qpl Mandrake/RPMS/*.rpm\"\n" -#: ../../install_steps.pm_.c:451 +#: ../../install_steps.pm_.c:452 #, c-format msgid "Welcome to %s" msgstr "欢迎来到 %s" -#: ../../install_steps.pm_.c:530 ../../install_steps.pm_.c:770 +#: ../../install_steps.pm_.c:531 ../../install_steps.pm_.c:772 msgid "No floppy drive available" msgstr "没有可用的软盘驱动器." @@ -4536,69 +4633,69 @@ msgstr " msgid "Please choose one of the following classes of installation:" msgstr "请从下列安装类别里选择一个:" -#: ../../install_steps_gtk.pm_.c:243 ../../install_steps_interactive.pm_.c:694 +#: ../../install_steps_gtk.pm_.c:237 ../../install_steps_interactive.pm_.c:678 msgid "Package Group Selection" msgstr "程序组选择" -#: ../../install_steps_gtk.pm_.c:276 ../../install_steps_interactive.pm_.c:709 +#: ../../install_steps_gtk.pm_.c:270 ../../install_steps_interactive.pm_.c:693 msgid "Individual package selection" msgstr "选择单个软件包" -#: ../../install_steps_gtk.pm_.c:299 ../../install_steps_interactive.pm_.c:633 +#: ../../install_steps_gtk.pm_.c:293 ../../install_steps_interactive.pm_.c:617 #, c-format msgid "Total size: %d / %d MB" msgstr "总共大小: %d / %d MB" -#: ../../install_steps_gtk.pm_.c:341 +#: ../../install_steps_gtk.pm_.c:335 msgid "Bad package" msgstr "有错的软件包" -#: ../../install_steps_gtk.pm_.c:342 +#: ../../install_steps_gtk.pm_.c:336 #, c-format msgid "Name: %s\n" msgstr "名称: %s\n" -#: ../../install_steps_gtk.pm_.c:343 +#: ../../install_steps_gtk.pm_.c:337 #, c-format msgid "Version: %s\n" msgstr "版本: %s\n" -#: ../../install_steps_gtk.pm_.c:344 +#: ../../install_steps_gtk.pm_.c:338 #, c-format msgid "Size: %d KB\n" msgstr "大小: %d KB\n" -#: ../../install_steps_gtk.pm_.c:345 +#: ../../install_steps_gtk.pm_.c:339 #, c-format msgid "Importance: %s\n" msgstr "重要性: %s\n" -#: ../../install_steps_gtk.pm_.c:367 +#: ../../install_steps_gtk.pm_.c:361 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "您不可以选择这个软件包. 没有足够空间安装它." -#: ../../install_steps_gtk.pm_.c:372 +#: ../../install_steps_gtk.pm_.c:366 msgid "The following packages are going to be installed" msgstr "下列软件包将要被安装" -#: ../../install_steps_gtk.pm_.c:373 +#: ../../install_steps_gtk.pm_.c:367 msgid "The following packages are going to be removed" msgstr "下列软件包将要被卸载" -#: ../../install_steps_gtk.pm_.c:385 +#: ../../install_steps_gtk.pm_.c:379 msgid "You can't select/unselect this package" msgstr "您不能改变这个软件包的选定" -#: ../../install_steps_gtk.pm_.c:397 +#: ../../install_steps_gtk.pm_.c:391 msgid "This is a mandatory package, it can't be unselected" msgstr "这个软件包是必需的, 不能取消选定" -#: ../../install_steps_gtk.pm_.c:399 +#: ../../install_steps_gtk.pm_.c:393 msgid "You can't unselect this package. It is already installed" msgstr "您不可以取消选择这个软件包. 它已经安装过了." -#: ../../install_steps_gtk.pm_.c:402 +#: ../../install_steps_gtk.pm_.c:396 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" @@ -4606,74 +4703,74 @@ msgstr "" "这个软件包必须进行升级.\n" "您真的要删除它吗?" -#: ../../install_steps_gtk.pm_.c:405 +#: ../../install_steps_gtk.pm_.c:399 msgid "You can't unselect this package. It must be upgraded" msgstr "您不能不选择这个软件包, 它必须升级" -#: ../../install_steps_gtk.pm_.c:410 +#: ../../install_steps_gtk.pm_.c:404 msgid "Show automatically selected packages" msgstr "显示自动选中的软件包" -#: ../../install_steps_gtk.pm_.c:411 ../../install_steps_interactive.pm_.c:255 +#: ../../install_steps_gtk.pm_.c:405 ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 -#: ../../standalone/drakbackup_.c:3600 +#: ../../standalone/drakbackup_.c:4257 msgid "Install" msgstr "安装" -#: ../../install_steps_gtk.pm_.c:414 +#: ../../install_steps_gtk.pm_.c:408 msgid "Load/Save on floppy" msgstr "软盘载入/保存" -#: ../../install_steps_gtk.pm_.c:415 +#: ../../install_steps_gtk.pm_.c:409 msgid "Updating package selection" msgstr "更新软件包选择" -#: ../../install_steps_gtk.pm_.c:420 +#: ../../install_steps_gtk.pm_.c:414 msgid "Minimal install" msgstr "最小安装" -#: ../../install_steps_gtk.pm_.c:435 ../../install_steps_interactive.pm_.c:538 +#: ../../install_steps_gtk.pm_.c:429 ../../install_steps_interactive.pm_.c:522 msgid "Choose the packages you want to install" msgstr "选择您要安装的软件包" -#: ../../install_steps_gtk.pm_.c:451 ../../install_steps_interactive.pm_.c:778 +#: ../../install_steps_gtk.pm_.c:445 ../../install_steps_interactive.pm_.c:762 msgid "Installing" msgstr "正在安装" -#: ../../install_steps_gtk.pm_.c:457 +#: ../../install_steps_gtk.pm_.c:451 msgid "Estimating" msgstr "正在估计" -#: ../../install_steps_gtk.pm_.c:464 +#: ../../install_steps_gtk.pm_.c:458 msgid "Time remaining " msgstr "剩余时间" -#: ../../install_steps_gtk.pm_.c:476 +#: ../../install_steps_gtk.pm_.c:470 msgid "Please wait, preparing installation..." msgstr "正在准备安装" -#: ../../install_steps_gtk.pm_.c:560 +#: ../../install_steps_gtk.pm_.c:554 #, c-format msgid "%d packages" msgstr "%d 软件包" -#: ../../install_steps_gtk.pm_.c:565 +#: ../../install_steps_gtk.pm_.c:559 #, c-format msgid "Installing package %s" msgstr "正在安装程序 %s" -#: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 -#: ../../install_steps_interactive.pm_.c:802 +#: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 +#: ../../install_steps_interactive.pm_.c:786 #: ../../standalone/drakautoinst_.c:202 msgid "Accept" msgstr "接受" -#: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 -#: ../../install_steps_interactive.pm_.c:802 +#: ../../install_steps_gtk.pm_.c:596 ../../install_steps_interactive.pm_.c:189 +#: ../../install_steps_interactive.pm_.c:786 msgid "Refuse" msgstr "拒绝" -#: ../../install_steps_gtk.pm_.c:603 ../../install_steps_interactive.pm_.c:803 +#: ../../install_steps_gtk.pm_.c:597 ../../install_steps_interactive.pm_.c:787 #, c-format msgid "" "Change your Cd-Rom!\n" @@ -4687,17 +4784,17 @@ msgstr "" "请在驱动器中插入标有 \"%s\" 的光盘, 然后点击 '确定'.\n" "如果您没有这张光盘, 请点击 '取消', 放弃安装这个光盘上的软件." -#: ../../install_steps_gtk.pm_.c:617 ../../install_steps_gtk.pm_.c:621 -#: ../../install_steps_interactive.pm_.c:815 -#: ../../install_steps_interactive.pm_.c:819 +#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_gtk.pm_.c:615 +#: ../../install_steps_interactive.pm_.c:799 +#: ../../install_steps_interactive.pm_.c:803 msgid "Go on anyway?" msgstr "真的要继续" -#: ../../install_steps_gtk.pm_.c:617 ../../install_steps_interactive.pm_.c:815 +#: ../../install_steps_gtk.pm_.c:611 ../../install_steps_interactive.pm_.c:799 msgid "There was an error ordering packages:" msgstr "排列软件包时出错" -#: ../../install_steps_gtk.pm_.c:621 ../../install_steps_interactive.pm_.c:819 +#: ../../install_steps_gtk.pm_.c:615 ../../install_steps_interactive.pm_.c:803 msgid "There was an error installing packages:" msgstr "安装软件包时出错:" @@ -5016,7 +5113,7 @@ msgid "Are you sure you refuse the licence?" msgstr "您真的要拒绝这个许可协议吗?" #: ../../install_steps_interactive.pm_.c:211 -#: ../../install_steps_interactive.pm_.c:1038 +#: ../../install_steps_interactive.pm_.c:1023 #: ../../standalone/keyboarddrake_.c:31 msgid "Keyboard" msgstr "键盘" @@ -5064,11 +5161,11 @@ msgstr "只 msgid "Please choose the type of your mouse." msgstr "请选择您的鼠标类型." -#: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:59 +#: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:60 msgid "Mouse Port" msgstr "鼠标端口" -#: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:60 +#: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:61 msgid "Please choose on which serial port your mouse is connected to." msgstr "请选择您的鼠标是连接到那个串行口 ?" @@ -5100,44 +5197,19 @@ msgstr " msgid "IDE" msgstr "IDE" -#: ../../install_steps_interactive.pm_.c:336 +#: ../../install_steps_interactive.pm_.c:338 msgid "No partition available" msgstr "没有可用的硬盘分区" -#: ../../install_steps_interactive.pm_.c:339 +#: ../../install_steps_interactive.pm_.c:341 msgid "Scanning partitions to find mount points" msgstr "正在扫描各个分区以寻找装载点" -#: ../../install_steps_interactive.pm_.c:347 +#: ../../install_steps_interactive.pm_.c:349 msgid "Choose the mount points" msgstr "选择装载点" -#: ../../install_steps_interactive.pm_.c:366 -#, c-format -msgid "" -"I can't read your partition table, it's too corrupted for me :(\n" -"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" -"The other solution is to not allow DrakX to modify the partition table.\n" -"(the error is %s)\n" -"\n" -"Do you agree to loose all the partitions?\n" -msgstr "" -"我无法读取您的分区表, 这个分区表破坏得太严重了 :(\n" -"我可以尝试清除坏分区 (所有的数据将被清除!)\n" -"另外一个解决办法是禁止 DrakX 修改分区表.\n" -"(错误是 %s)\n" -"\n" -"您同意清除所有分区吗?\n" - -#: ../../install_steps_interactive.pm_.c:379 -msgid "" -"DiskDrake failed to read correctly the partition table.\n" -"Continue at your own risk!" -msgstr "" -"DiskDrake 无法正确读出分区表的内容.\n" -"继续下去会怎样就看您的运气了!" - -#: ../../install_steps_interactive.pm_.c:396 +#: ../../install_steps_interactive.pm_.c:379 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" @@ -5145,74 +5217,74 @@ msgstr "" "无法创建开机启动空间(1MB)! 安装将继续, 但如需启动系统, 您可用DiskDrake创建启" "动分区" -#: ../../install_steps_interactive.pm_.c:405 +#: ../../install_steps_interactive.pm_.c:388 msgid "No root partition found to perform an upgrade" msgstr "升级没有找到根目录分区" -#: ../../install_steps_interactive.pm_.c:406 +#: ../../install_steps_interactive.pm_.c:389 msgid "Root Partition" msgstr "根目录分区" -#: ../../install_steps_interactive.pm_.c:407 +#: ../../install_steps_interactive.pm_.c:390 msgid "What is the root partition (/) of your system?" msgstr "您的根目录分区(/)是哪一个 ?" -#: ../../install_steps_interactive.pm_.c:421 +#: ../../install_steps_interactive.pm_.c:404 msgid "You need to reboot for the partition table modifications to take place" msgstr "您将需要重新启动使改变生效" -#: ../../install_steps_interactive.pm_.c:445 +#: ../../install_steps_interactive.pm_.c:428 msgid "Choose the partitions you want to format" msgstr "请选择您要格式化的分区" -#: ../../install_steps_interactive.pm_.c:446 +#: ../../install_steps_interactive.pm_.c:429 msgid "Check bad blocks?" msgstr "是否检查坏磁块?" -#: ../../install_steps_interactive.pm_.c:473 +#: ../../install_steps_interactive.pm_.c:456 msgid "Formatting partitions" msgstr "正在格式化各个分区" -#: ../../install_steps_interactive.pm_.c:475 +#: ../../install_steps_interactive.pm_.c:458 #, c-format msgid "Creating and formatting file %s" msgstr "正在创建和格式化文件 %s" -#: ../../install_steps_interactive.pm_.c:480 +#: ../../install_steps_interactive.pm_.c:463 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "无法检查文件系统 %s. 您想修复错误吗? (注意, 有可能丢失数据)" -#: ../../install_steps_interactive.pm_.c:482 +#: ../../install_steps_interactive.pm_.c:465 msgid "Not enough swap space to fulfill installation, please add some" msgstr "对换空间太少, 无法完成安装, 请扩大交换分区." -#: ../../install_steps_interactive.pm_.c:489 +#: ../../install_steps_interactive.pm_.c:472 msgid "Looking for available packages and rebuilding rpm database..." msgstr "寻找可安装的程序并重建 rpm 数据库..." -#: ../../install_steps_interactive.pm_.c:490 +#: ../../install_steps_interactive.pm_.c:473 msgid "Looking for available packages..." msgstr "寻找可安装的程序..." -#: ../../install_steps_interactive.pm_.c:493 +#: ../../install_steps_interactive.pm_.c:476 msgid "Looking at packages already installed..." msgstr "查找已经安装过的软件包." -#: ../../install_steps_interactive.pm_.c:497 +#: ../../install_steps_interactive.pm_.c:480 msgid "Finding packages to upgrade..." msgstr "寻找可升级的程序..." -#: ../../install_steps_interactive.pm_.c:515 +#: ../../install_steps_interactive.pm_.c:498 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "您的系统所剩余的空间不够进行安装或升级 (%d > %d)" -#: ../../install_steps_interactive.pm_.c:550 +#: ../../install_steps_interactive.pm_.c:534 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." @@ -5220,53 +5292,53 @@ msgstr "" "请选择用软盘载入或保存软件包选择信息.\n" "格式与自动安装生成的软盘一样" -#: ../../install_steps_interactive.pm_.c:553 +#: ../../install_steps_interactive.pm_.c:537 msgid "Load from floppy" msgstr "从软盘载入" -#: ../../install_steps_interactive.pm_.c:555 +#: ../../install_steps_interactive.pm_.c:539 msgid "Loading from floppy" msgstr "正从软盘载入" -#: ../../install_steps_interactive.pm_.c:555 +#: ../../install_steps_interactive.pm_.c:539 msgid "Package selection" msgstr "软件包选择" -#: ../../install_steps_interactive.pm_.c:560 +#: ../../install_steps_interactive.pm_.c:544 msgid "Insert a floppy containing package selection" msgstr "请插入软件包选择软盘" -#: ../../install_steps_interactive.pm_.c:572 +#: ../../install_steps_interactive.pm_.c:556 msgid "Save on floppy" msgstr "保存入软盘" -#: ../../install_steps_interactive.pm_.c:646 +#: ../../install_steps_interactive.pm_.c:630 msgid "Selected size is larger than available space" msgstr "您选择的超过可用空间" -#: ../../install_steps_interactive.pm_.c:660 +#: ../../install_steps_interactive.pm_.c:644 msgid "Type of install" msgstr "安装类型" -#: ../../install_steps_interactive.pm_.c:661 +#: ../../install_steps_interactive.pm_.c:645 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "您没有选择任何的组件, 请选择最小安装" -#: ../../install_steps_interactive.pm_.c:664 +#: ../../install_steps_interactive.pm_.c:648 msgid "With X" msgstr "安装 X Window 系统" -#: ../../install_steps_interactive.pm_.c:666 +#: ../../install_steps_interactive.pm_.c:650 msgid "With basic documentation (recommended!)" msgstr "安装基础文档 (建议)" -#: ../../install_steps_interactive.pm_.c:667 +#: ../../install_steps_interactive.pm_.c:651 msgid "Truly minimal install (especially no urpmi)" msgstr "最小安装 (无包管理工具)" -#: ../../install_steps_interactive.pm_.c:752 +#: ../../install_steps_interactive.pm_.c:736 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" @@ -5276,16 +5348,16 @@ msgstr "" "如果您没有任何一张, 点击 取消.\n" "如果您只缺其中一些, 不选中它, 然后点击 确认." -#: ../../install_steps_interactive.pm_.c:757 +#: ../../install_steps_interactive.pm_.c:741 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "标号 %s 的CD-ROM " -#: ../../install_steps_interactive.pm_.c:778 +#: ../../install_steps_interactive.pm_.c:762 msgid "Preparing installation" msgstr "正在准备安装" -#: ../../install_steps_interactive.pm_.c:787 +#: ../../install_steps_interactive.pm_.c:771 #, c-format msgid "" "Installing package %s\n" @@ -5294,21 +5366,21 @@ msgstr "" "正在安装软件包 %s \n" "%d%%" -#: ../../install_steps_interactive.pm_.c:833 +#: ../../install_steps_interactive.pm_.c:817 msgid "Post-install configuration" msgstr "安装后的配置" -#: ../../install_steps_interactive.pm_.c:839 +#: ../../install_steps_interactive.pm_.c:823 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "请插入一张启动软盘到驱动器 %s" -#: ../../install_steps_interactive.pm_.c:845 +#: ../../install_steps_interactive.pm_.c:829 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "请在驱动器 %s 中插入一张更新模块软盘" -#: ../../install_steps_interactive.pm_.c:865 +#: ../../install_steps_interactive.pm_.c:849 msgid "" "You now have the opportunity to download encryption software.\n" "\n" @@ -5371,7 +5443,7 @@ msgstr "" "Altadena California 91001\n" "USA" -#: ../../install_steps_interactive.pm_.c:904 +#: ../../install_steps_interactive.pm_.c:888 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" @@ -5386,154 +5458,154 @@ msgstr "" "\n" "您是否要安装升级?" -#: ../../install_steps_interactive.pm_.c:919 +#: ../../install_steps_interactive.pm_.c:903 msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "正在连接 Mandrake Linux 网站以获得镜像网站列表..." -#: ../../install_steps_interactive.pm_.c:924 +#: ../../install_steps_interactive.pm_.c:908 msgid "Choose a mirror from which to get the packages" msgstr "选择一个镜象网站来取得程序" -#: ../../install_steps_interactive.pm_.c:933 +#: ../../install_steps_interactive.pm_.c:917 msgid "Contacting the mirror to get the list of available packages..." msgstr "正在连接镜象网站以取得可供安装程序的列表..." -#: ../../install_steps_interactive.pm_.c:960 +#: ../../install_steps_interactive.pm_.c:945 msgid "Which is your timezone?" msgstr "您处在的时区?" -#: ../../install_steps_interactive.pm_.c:965 +#: ../../install_steps_interactive.pm_.c:950 msgid "Hardware clock set to GMT" msgstr "您的系统时钟设定为 GMT" -#: ../../install_steps_interactive.pm_.c:966 +#: ../../install_steps_interactive.pm_.c:951 msgid "Automatic time synchronization (using NTP)" msgstr "自动时间同步(使用NTP)" -#: ../../install_steps_interactive.pm_.c:973 +#: ../../install_steps_interactive.pm_.c:958 msgid "NTP Server" msgstr "NTP 服务器" -#: ../../install_steps_interactive.pm_.c:1007 -#: ../../install_steps_interactive.pm_.c:1015 +#: ../../install_steps_interactive.pm_.c:992 +#: ../../install_steps_interactive.pm_.c:1000 msgid "Remote CUPS server" msgstr "远程 CUPS 服务器" -#: ../../install_steps_interactive.pm_.c:1008 +#: ../../install_steps_interactive.pm_.c:993 msgid "No printer" msgstr "没有打印机" -#: ../../install_steps_interactive.pm_.c:1025 +#: ../../install_steps_interactive.pm_.c:1010 msgid "Do you have an ISA sound card?" msgstr "您有 ISA 声卡吗?" -#: ../../install_steps_interactive.pm_.c:1027 +#: ../../install_steps_interactive.pm_.c:1012 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "安装之后运行 \"sndconfig\"来配置您的声卡" -#: ../../install_steps_interactive.pm_.c:1029 +#: ../../install_steps_interactive.pm_.c:1014 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "没有找到声卡. 请在安装之后尝试\"harddrake\"." -#: ../../install_steps_interactive.pm_.c:1034 ../../steps.pm_.c:27 +#: ../../install_steps_interactive.pm_.c:1019 ../../steps.pm_.c:27 msgid "Summary" msgstr "概要" -#: ../../install_steps_interactive.pm_.c:1037 +#: ../../install_steps_interactive.pm_.c:1022 msgid "Mouse" msgstr "鼠标" -#: ../../install_steps_interactive.pm_.c:1039 +#: ../../install_steps_interactive.pm_.c:1024 msgid "Timezone" msgstr "时区" -#: ../../install_steps_interactive.pm_.c:1040 ../../printerdrake.pm_.c:2728 -#: ../../printerdrake.pm_.c:2814 +#: ../../install_steps_interactive.pm_.c:1025 ../../printerdrake.pm_.c:2937 +#: ../../printerdrake.pm_.c:3026 msgid "Printer" msgstr "打印机" -#: ../../install_steps_interactive.pm_.c:1042 +#: ../../install_steps_interactive.pm_.c:1027 msgid "ISDN card" msgstr "内置 ISDN 卡" -#: ../../install_steps_interactive.pm_.c:1045 -#: ../../install_steps_interactive.pm_.c:1047 +#: ../../install_steps_interactive.pm_.c:1030 +#: ../../install_steps_interactive.pm_.c:1032 msgid "Sound card" msgstr "声卡" -#: ../../install_steps_interactive.pm_.c:1049 +#: ../../install_steps_interactive.pm_.c:1034 msgid "TV card" msgstr "TV 卡" -#: ../../install_steps_interactive.pm_.c:1089 -#: ../../install_steps_interactive.pm_.c:1114 -#: ../../install_steps_interactive.pm_.c:1118 +#: ../../install_steps_interactive.pm_.c:1074 +#: ../../install_steps_interactive.pm_.c:1099 +#: ../../install_steps_interactive.pm_.c:1103 msgid "LDAP" msgstr "LDAP" -#: ../../install_steps_interactive.pm_.c:1090 -#: ../../install_steps_interactive.pm_.c:1114 -#: ../../install_steps_interactive.pm_.c:1127 +#: ../../install_steps_interactive.pm_.c:1075 +#: ../../install_steps_interactive.pm_.c:1099 +#: ../../install_steps_interactive.pm_.c:1112 msgid "NIS" msgstr "使用NIS" -#: ../../install_steps_interactive.pm_.c:1091 -#: ../../install_steps_interactive.pm_.c:1114 -#: ../../install_steps_interactive.pm_.c:1135 -#: ../../install_steps_interactive.pm_.c:1141 +#: ../../install_steps_interactive.pm_.c:1076 +#: ../../install_steps_interactive.pm_.c:1099 +#: ../../install_steps_interactive.pm_.c:1120 +#: ../../install_steps_interactive.pm_.c:1126 msgid "Windows Domain" msgstr "Windows 域" -#: ../../install_steps_interactive.pm_.c:1092 -#: ../../install_steps_interactive.pm_.c:1114 +#: ../../install_steps_interactive.pm_.c:1077 +#: ../../install_steps_interactive.pm_.c:1099 msgid "Local files" msgstr "本机文件" -#: ../../install_steps_interactive.pm_.c:1101 -#: ../../install_steps_interactive.pm_.c:1102 ../../steps.pm_.c:24 +#: ../../install_steps_interactive.pm_.c:1086 +#: ../../install_steps_interactive.pm_.c:1087 ../../steps.pm_.c:24 msgid "Set root password" msgstr "超级用户口令" -#: ../../install_steps_interactive.pm_.c:1103 +#: ../../install_steps_interactive.pm_.c:1088 msgid "No password" msgstr "没有口令" -#: ../../install_steps_interactive.pm_.c:1108 +#: ../../install_steps_interactive.pm_.c:1093 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "这个口令太简单了 (至少要有 %d 个字符)" -#: ../../install_steps_interactive.pm_.c:1114 ../../network/modem.pm_.c:49 +#: ../../install_steps_interactive.pm_.c:1099 ../../network/modem.pm_.c:49 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172 msgid "Authentication" msgstr "认证" -#: ../../install_steps_interactive.pm_.c:1122 +#: ../../install_steps_interactive.pm_.c:1107 msgid "Authentication LDAP" msgstr "LDAP 认证" -#: ../../install_steps_interactive.pm_.c:1123 +#: ../../install_steps_interactive.pm_.c:1108 msgid "LDAP Base dn" msgstr "LDAP 基本目录名 dn" -#: ../../install_steps_interactive.pm_.c:1124 +#: ../../install_steps_interactive.pm_.c:1109 msgid "LDAP Server" msgstr "LDAP 服务器" -#: ../../install_steps_interactive.pm_.c:1130 +#: ../../install_steps_interactive.pm_.c:1115 msgid "Authentication NIS" msgstr "NIS 认证" -#: ../../install_steps_interactive.pm_.c:1131 +#: ../../install_steps_interactive.pm_.c:1116 msgid "NIS Domain" msgstr "NIS 网域" -#: ../../install_steps_interactive.pm_.c:1132 +#: ../../install_steps_interactive.pm_.c:1117 msgid "NIS Server" msgstr "NIS 服务器" -#: ../../install_steps_interactive.pm_.c:1138 +#: ../../install_steps_interactive.pm_.c:1123 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" @@ -5557,19 +5629,19 @@ msgstr "" "域名 -U 用户%口令' 填入您的 Windows(tm) 域名, 和管理员的用户名/口令.\n" "命令 'wbinfo -t' 会测试您的认证密码是否完好." -#: ../../install_steps_interactive.pm_.c:1140 +#: ../../install_steps_interactive.pm_.c:1125 msgid "Authentication Windows Domain" msgstr "认证 Windows 域" -#: ../../install_steps_interactive.pm_.c:1142 +#: ../../install_steps_interactive.pm_.c:1127 msgid "Domain Admin User Name" msgstr "域管理员用户名" -#: ../../install_steps_interactive.pm_.c:1143 +#: ../../install_steps_interactive.pm_.c:1128 msgid "Domain Admin Password" msgstr "域管理员口令" -#: ../../install_steps_interactive.pm_.c:1178 +#: ../../install_steps_interactive.pm_.c:1163 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " @@ -5593,19 +5665,19 @@ msgstr "" "现在就给您的系统做一张开机软盘, 好吗? \n" "在第一个软盘驱动器里放一片软盘, 然后按\"确定\"" -#: ../../install_steps_interactive.pm_.c:1194 +#: ../../install_steps_interactive.pm_.c:1179 msgid "First floppy drive" msgstr "第一个软盘驱动器" -#: ../../install_steps_interactive.pm_.c:1195 +#: ../../install_steps_interactive.pm_.c:1180 msgid "Second floppy drive" msgstr "第二个软盘驱动器" -#: ../../install_steps_interactive.pm_.c:1196 ../../printerdrake.pm_.c:2277 +#: ../../install_steps_interactive.pm_.c:1181 ../../printerdrake.pm_.c:2470 msgid "Skip" msgstr "略过" -#: ../../install_steps_interactive.pm_.c:1201 +#: ../../install_steps_interactive.pm_.c:1186 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" @@ -5627,7 +5699,7 @@ msgstr "" "现在就给您的系统做一张开机软盘, 好吗?\n" "%s" -#: ../../install_steps_interactive.pm_.c:1207 +#: ../../install_steps_interactive.pm_.c:1192 msgid "" "\n" "\n" @@ -5641,28 +5713,28 @@ msgstr "" "很可能无法在一个 1.44 Mb 软盘上创建起动盘,\n" "因为 XFS 需要一个很大的驱动程序)." -#: ../../install_steps_interactive.pm_.c:1215 +#: ../../install_steps_interactive.pm_.c:1200 msgid "Sorry, no floppy drive available" msgstr "抱歉，没有可用的软盘机" -#: ../../install_steps_interactive.pm_.c:1219 +#: ../../install_steps_interactive.pm_.c:1204 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "选择您要制作开机软盘的软盘机" -#: ../../install_steps_interactive.pm_.c:1223 +#: ../../install_steps_interactive.pm_.c:1208 #, c-format msgid "Insert a floppy in %s" msgstr "请插入一张软盘到驱动器 %s" -#: ../../install_steps_interactive.pm_.c:1226 +#: ../../install_steps_interactive.pm_.c:1211 msgid "Creating bootdisk..." msgstr "正在制作开机软盘" -#: ../../install_steps_interactive.pm_.c:1233 +#: ../../install_steps_interactive.pm_.c:1218 msgid "Preparing bootloader..." msgstr "准备开机引导程序" -#: ../../install_steps_interactive.pm_.c:1244 +#: ../../install_steps_interactive.pm_.c:1229 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" @@ -5673,11 +5745,11 @@ msgstr "" "yaboot无法开机启动.\n" "要继续安装, 你得使用BootX启动" -#: ../../install_steps_interactive.pm_.c:1250 +#: ../../install_steps_interactive.pm_.c:1235 msgid "Do you want to use aboot?" msgstr "您要使用 aboot 吗?" -#: ../../install_steps_interactive.pm_.c:1253 +#: ../../install_steps_interactive.pm_.c:1238 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" @@ -5685,15 +5757,15 @@ msgstr "" "安装 aboot 时出错, \n" "强迫安装会毁坏第一个分区, 要继续吗?" -#: ../../install_steps_interactive.pm_.c:1260 +#: ../../install_steps_interactive.pm_.c:1245 msgid "Installing bootloader" msgstr "安装引导程序" -#: ../../install_steps_interactive.pm_.c:1266 +#: ../../install_steps_interactive.pm_.c:1251 msgid "Installation of bootloader failed. The following error occured:" msgstr "安装系统引导程序失败，出现下列错误:" -#: ../../install_steps_interactive.pm_.c:1274 +#: ../../install_steps_interactive.pm_.c:1259 #, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" @@ -5709,17 +5781,17 @@ msgstr "" " 然后输入: shut-down\n" "你将在下次开机时看到引导程序提示." -#: ../../install_steps_interactive.pm_.c:1308 +#: ../../install_steps_interactive.pm_.c:1293 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "请在驱动器 %s 中插入一张空白软盘" -#: ../../install_steps_interactive.pm_.c:1312 +#: ../../install_steps_interactive.pm_.c:1297 msgid "Creating auto install floppy..." msgstr "正在创建自动安装软盘" -#: ../../install_steps_interactive.pm_.c:1323 +#: ../../install_steps_interactive.pm_.c:1308 msgid "" "Some steps are not completed.\n" "\n" @@ -5729,7 +5801,7 @@ msgstr "" "\n" "您确信要现在退出吗?" -#: ../../install_steps_interactive.pm_.c:1334 +#: ../../install_steps_interactive.pm_.c:1319 #, c-format msgid "" "Congratulations, installation is complete.\n" @@ -5760,15 +5832,15 @@ msgstr "" "\n" "关于如何配置您的系统, 请查看 Mandrake Linux 用户手册." -#: ../../install_steps_interactive.pm_.c:1347 +#: ../../install_steps_interactive.pm_.c:1332 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "http://www.mandrakelinux.com/en/90errata.php3" -#: ../../install_steps_interactive.pm_.c:1352 +#: ../../install_steps_interactive.pm_.c:1337 msgid "Generate auto install floppy" msgstr "正在创建自动安装软盘" -#: ../../install_steps_interactive.pm_.c:1354 +#: ../../install_steps_interactive.pm_.c:1339 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" @@ -5777,15 +5849,15 @@ msgid "" "You may prefer to replay the installation.\n" msgstr "自动安装能全自动处理硬盘安装, 你可能愿意重现安装.\n" -#: ../../install_steps_interactive.pm_.c:1359 +#: ../../install_steps_interactive.pm_.c:1344 msgid "Automated" msgstr "自动" -#: ../../install_steps_interactive.pm_.c:1359 +#: ../../install_steps_interactive.pm_.c:1344 msgid "Replay" msgstr "重现" -#: ../../install_steps_interactive.pm_.c:1362 +#: ../../install_steps_interactive.pm_.c:1347 msgid "Save packages selection" msgstr "保存软件包选择" @@ -5794,7 +5866,8 @@ msgstr " msgid "Mandrake Linux Installation %s" msgstr "Mandrake Linux 安装 %s" -#: ../../install_steps_newt.pm_.c:34 +#. -PO This string must fit in a 80-char wide text screen +#: ../../install_steps_newt.pm_.c:35 msgid "" " / between elements | selects | next screen " msgstr " / 在项目间移动 | 选择 | 下个画面 " @@ -5811,22 +5884,22 @@ msgstr "缺 msgid "Choose a file" msgstr "选择文件" -#: ../../interactive.pm_.c:317 +#: ../../interactive.pm_.c:320 msgid "Advanced" msgstr "高级" -#: ../../interactive.pm_.c:318 +#: ../../interactive.pm_.c:321 msgid "Basic" msgstr "基本" -#: ../../interactive/newt.pm_.c:174 ../../my_gtk.pm_.c:155 -#: ../../printerdrake.pm_.c:1990 +#: ../../interactive/newt.pm_.c:174 ../../my_gtk.pm_.c:158 +#: ../../printerdrake.pm_.c:2124 msgid "<- Previous" msgstr "<-前一步" #: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176 -#: ../../standalone/drakbackup_.c:3464 ../../standalone/drakbackup_.c:3491 -#: ../../standalone/drakbackup_.c:3517 +#: ../../standalone/drakbackup_.c:4112 ../../standalone/drakbackup_.c:4139 +#: ../../standalone/drakbackup_.c:4169 ../../standalone/drakbackup_.c:4195 msgid "Next" msgstr "下一步" @@ -5856,7 +5929,7 @@ msgstr " #: ../../interactive/stdio.pm_.c:95 #, c-format msgid "Button `%s': %s" -msgstr "按钮: %s : %s" +msgstr "按钮: %s: %s" #: ../../interactive/stdio.pm_.c:96 msgid "Do you want to click on this button?" @@ -5899,375 +5972,371 @@ msgstr "" msgid "Re-submit" msgstr "重新提交" -#: ../../keyboard.pm_.c:173 ../../keyboard.pm_.c:208 +#: ../../keyboard.pm_.c:152 ../../keyboard.pm_.c:187 msgid "Czech (QWERTZ)" msgstr "捷克 (QWERTZ)" -#: ../../keyboard.pm_.c:174 ../../keyboard.pm_.c:210 +#: ../../keyboard.pm_.c:153 ../../keyboard.pm_.c:189 msgid "German" msgstr "德国" -#: ../../keyboard.pm_.c:175 +#: ../../keyboard.pm_.c:154 msgid "Dvorak" msgstr "Dvorak" -#: ../../keyboard.pm_.c:176 ../../keyboard.pm_.c:218 +#: ../../keyboard.pm_.c:155 ../../keyboard.pm_.c:197 msgid "Spanish" msgstr "西班牙" -#: ../../keyboard.pm_.c:177 ../../keyboard.pm_.c:219 +#: ../../keyboard.pm_.c:156 ../../keyboard.pm_.c:198 msgid "Finnish" msgstr "芬兰" -#: ../../keyboard.pm_.c:178 ../../keyboard.pm_.c:220 +#: ../../keyboard.pm_.c:157 ../../keyboard.pm_.c:199 msgid "French" msgstr "法国" -#: ../../keyboard.pm_.c:179 ../../keyboard.pm_.c:252 +#: ../../keyboard.pm_.c:158 ../../keyboard.pm_.c:231 msgid "Norwegian" msgstr "挪威" -#: ../../keyboard.pm_.c:180 +#: ../../keyboard.pm_.c:159 msgid "Polish" msgstr "波兰" -#: ../../keyboard.pm_.c:181 ../../keyboard.pm_.c:260 +#: ../../keyboard.pm_.c:160 ../../keyboard.pm_.c:239 msgid "Russian" msgstr "俄国" -#: ../../keyboard.pm_.c:183 ../../keyboard.pm_.c:262 +#: ../../keyboard.pm_.c:162 ../../keyboard.pm_.c:241 msgid "Swedish" msgstr "瑞典语" -#: ../../keyboard.pm_.c:184 ../../keyboard.pm_.c:278 +#: ../../keyboard.pm_.c:163 ../../keyboard.pm_.c:257 msgid "UK keyboard" msgstr "英国" -#: ../../keyboard.pm_.c:185 ../../keyboard.pm_.c:279 +#: ../../keyboard.pm_.c:164 ../../keyboard.pm_.c:258 msgid "US keyboard" msgstr "美国键盘" -#: ../../keyboard.pm_.c:187 +#: ../../keyboard.pm_.c:166 msgid "Albanian" msgstr "阿尔巴尼亚" -#: ../../keyboard.pm_.c:188 +#: ../../keyboard.pm_.c:167 msgid "Armenian (old)" msgstr "美国 (老式)" -#: ../../keyboard.pm_.c:189 +#: ../../keyboard.pm_.c:168 msgid "Armenian (typewriter)" msgstr "美国 (打字)" -#: ../../keyboard.pm_.c:190 +#: ../../keyboard.pm_.c:169 msgid "Armenian (phonetic)" msgstr "美国 (音标)" -#: ../../keyboard.pm_.c:195 +#: ../../keyboard.pm_.c:174 msgid "Azerbaidjani (latin)" msgstr "Azerbaidjani (latin)" -#: ../../keyboard.pm_.c:197 +#: ../../keyboard.pm_.c:176 msgid "Belgian" msgstr "比利时" -#: ../../keyboard.pm_.c:198 -#, fuzzy +#: ../../keyboard.pm_.c:177 msgid "Bengali" -msgstr "启动" +msgstr "孟加拉" -#: ../../keyboard.pm_.c:199 +#: ../../keyboard.pm_.c:178 msgid "Bulgarian (phonetic)" msgstr "保加利亚 (音标)" -#: ../../keyboard.pm_.c:200 +#: ../../keyboard.pm_.c:179 msgid "Bulgarian (BDS)" msgstr "保加利亚 (BDS)" -#: ../../keyboard.pm_.c:201 +#: ../../keyboard.pm_.c:180 msgid "Brazilian (ABNT-2)" msgstr "巴西 (ABNT-2)" -#: ../../keyboard.pm_.c:204 -#, fuzzy +#: ../../keyboard.pm_.c:183 msgid "Bosnian" -msgstr "埃斯托尼亚" +msgstr "波斯尼亚" -#: ../../keyboard.pm_.c:205 +#: ../../keyboard.pm_.c:184 msgid "Belarusian" msgstr "白俄罗斯" -#: ../../keyboard.pm_.c:206 +#: ../../keyboard.pm_.c:185 msgid "Swiss (German layout)" msgstr "瑞士 (德语布局)" -#: ../../keyboard.pm_.c:207 +#: ../../keyboard.pm_.c:186 msgid "Swiss (French layout)" msgstr "瑞士 (法语布局)" -#: ../../keyboard.pm_.c:209 +#: ../../keyboard.pm_.c:188 msgid "Czech (QWERTY)" msgstr "捷克 (QWERTY)" -#: ../../keyboard.pm_.c:211 +#: ../../keyboard.pm_.c:190 msgid "German (no dead keys)" msgstr "德国 (没有dead keys)" -#: ../../keyboard.pm_.c:212 +#: ../../keyboard.pm_.c:191 msgid "Devanagari" -msgstr "" +msgstr "梵文" -#: ../../keyboard.pm_.c:213 +#: ../../keyboard.pm_.c:192 msgid "Danish" msgstr "丹麦" -#: ../../keyboard.pm_.c:214 +#: ../../keyboard.pm_.c:193 msgid "Dvorak (US)" msgstr "Dvorak (US)" -#: ../../keyboard.pm_.c:215 +#: ../../keyboard.pm_.c:194 msgid "Dvorak (Norwegian)" msgstr "Dvorak (Norwegian)" -#: ../../keyboard.pm_.c:216 +#: ../../keyboard.pm_.c:195 msgid "Dvorak (Swedish)" msgstr "Dvorak (Swedish)" -#: ../../keyboard.pm_.c:217 +#: ../../keyboard.pm_.c:196 msgid "Estonian" msgstr "埃斯托尼亚" -#: ../../keyboard.pm_.c:221 +#: ../../keyboard.pm_.c:200 msgid "Georgian (\"Russian\" layout)" msgstr "格鲁吉亚(\"俄语\"布局)" -#: ../../keyboard.pm_.c:222 +#: ../../keyboard.pm_.c:201 msgid "Georgian (\"Latin\" layout)" msgstr "格鲁吉亚(\"拉丁\" 布局)" -#: ../../keyboard.pm_.c:223 +#: ../../keyboard.pm_.c:202 msgid "Greek" msgstr "希腊" -#: ../../keyboard.pm_.c:224 +#: ../../keyboard.pm_.c:203 msgid "Gujarati" -msgstr "" +msgstr "Gujarati" -#: ../../keyboard.pm_.c:225 +#: ../../keyboard.pm_.c:204 msgid "Gurmukhi" -msgstr "" +msgstr "Gurmukhi" -#: ../../keyboard.pm_.c:226 +#: ../../keyboard.pm_.c:205 msgid "Hungarian" msgstr "匈牙利" -#: ../../keyboard.pm_.c:227 +#: ../../keyboard.pm_.c:206 msgid "Croatian" msgstr "克罗地亚" -#: ../../keyboard.pm_.c:228 +#: ../../keyboard.pm_.c:207 msgid "Israeli" msgstr "以色列" -#: ../../keyboard.pm_.c:229 +#: ../../keyboard.pm_.c:208 msgid "Israeli (Phonetic)" msgstr "以色列 (音标)" -#: ../../keyboard.pm_.c:230 +#: ../../keyboard.pm_.c:209 msgid "Iranian" msgstr "伊朗" -#: ../../keyboard.pm_.c:231 +#: ../../keyboard.pm_.c:210 msgid "Icelandic" msgstr "冰岛" -#: ../../keyboard.pm_.c:232 +#: ../../keyboard.pm_.c:211 msgid "Italian" msgstr "意大利" -#: ../../keyboard.pm_.c:233 +#: ../../keyboard.pm_.c:212 msgid "Inuktitut" -msgstr "" +msgstr "Inuktitut" -#: ../../keyboard.pm_.c:234 +#: ../../keyboard.pm_.c:213 msgid "Japanese 106 keys" msgstr "日文106键盘" -#: ../../keyboard.pm_.c:237 +#: ../../keyboard.pm_.c:216 msgid "Korean keyboard" msgstr "韩国键盘" -#: ../../keyboard.pm_.c:238 +#: ../../keyboard.pm_.c:217 msgid "Latin American" msgstr "拉美键盘" -#: ../../keyboard.pm_.c:239 -#, fuzzy +#: ../../keyboard.pm_.c:218 msgid "Laotian" -msgstr "拉脱维亚" +msgstr "老挝" -#: ../../keyboard.pm_.c:240 +#: ../../keyboard.pm_.c:219 msgid "Lithuanian AZERTY (old)" msgstr "立陶宛 AZERTY (老式)" -#: ../../keyboard.pm_.c:242 +#: ../../keyboard.pm_.c:221 msgid "Lithuanian AZERTY (new)" msgstr "立陶宛 AZERTY (新式)" -#: ../../keyboard.pm_.c:243 +#: ../../keyboard.pm_.c:222 msgid "Lithuanian \"number row\" QWERTY" msgstr "立陶宛 \"number row\" QWERTY" -#: ../../keyboard.pm_.c:244 +#: ../../keyboard.pm_.c:223 msgid "Lithuanian \"phonetic\" QWERTY" msgstr "立陶宛 \"phonetic\" QWERTY" -#: ../../keyboard.pm_.c:245 +#: ../../keyboard.pm_.c:224 msgid "Latvian" msgstr "拉脱维亚" -#: ../../keyboard.pm_.c:246 +#: ../../keyboard.pm_.c:225 msgid "Macedonian" msgstr "马其顿" -#: ../../keyboard.pm_.c:247 +#: ../../keyboard.pm_.c:226 msgid "Myanmar (Burmese)" -msgstr "" +msgstr "缅甸 (Burmese)" -#: ../../keyboard.pm_.c:248 -#, fuzzy +#: ../../keyboard.pm_.c:227 msgid "Mongolian (cyrillic)" -msgstr "赛尔维亚 (cyrillic)" +msgstr "蒙古 (cyrillic)" -#: ../../keyboard.pm_.c:249 +#: ../../keyboard.pm_.c:228 msgid "Maltese (UK)" -msgstr "" +msgstr "Maltese (UK)" -#: ../../keyboard.pm_.c:250 +#: ../../keyboard.pm_.c:229 msgid "Maltese (US)" -msgstr "" +msgstr "Maltese (US)" -#: ../../keyboard.pm_.c:251 +#: ../../keyboard.pm_.c:230 msgid "Dutch" msgstr "荷兰" -#: ../../keyboard.pm_.c:253 +#: ../../keyboard.pm_.c:232 msgid "Polish (qwerty layout)" msgstr "波兰 (QWERTY 布局)" -#: ../../keyboard.pm_.c:254 +#: ../../keyboard.pm_.c:233 msgid "Polish (qwertz layout)" msgstr "波兰 (QWERTZ 布局)" -#: ../../keyboard.pm_.c:255 +#: ../../keyboard.pm_.c:234 msgid "Portuguese" msgstr "葡萄牙语" -#: ../../keyboard.pm_.c:256 +#: ../../keyboard.pm_.c:235 msgid "Canadian (Quebec)" msgstr "加拿大 (魁北克)" -#: ../../keyboard.pm_.c:258 +#: ../../keyboard.pm_.c:237 msgid "Romanian (qwertz)" msgstr "罗马尼亚 (QWERTZ 布局)" -#: ../../keyboard.pm_.c:259 +#: ../../keyboard.pm_.c:238 msgid "Romanian (qwerty)" msgstr "罗马尼亚 (QWERTY 布局)" -#: ../../keyboard.pm_.c:261 +#: ../../keyboard.pm_.c:240 msgid "Russian (Yawerty)" msgstr "俄语 (YAWERTY 布局)" -#: ../../keyboard.pm_.c:263 +#: ../../keyboard.pm_.c:242 msgid "Slovenian" msgstr "斯洛文尼亚" -#: ../../keyboard.pm_.c:264 +#: ../../keyboard.pm_.c:243 msgid "Slovakian (QWERTZ)" msgstr "斯洛伐克 (QWERTZ 布局)" -#: ../../keyboard.pm_.c:265 +#: ../../keyboard.pm_.c:244 msgid "Slovakian (QWERTY)" msgstr "斯洛伐克 (QWERTY 布局)" -#: ../../keyboard.pm_.c:267 +#: ../../keyboard.pm_.c:246 msgid "Serbian (cyrillic)" msgstr "赛尔维亚 (cyrillic)" -#: ../../keyboard.pm_.c:269 +#: ../../keyboard.pm_.c:248 msgid "Tamil (Unicode)" msgstr "坦米尔 (Unicode)" -#: ../../keyboard.pm_.c:270 +#: ../../keyboard.pm_.c:249 msgid "Tamil (TSCII)" msgstr "坦米尔 (TSCII)" -#: ../../keyboard.pm_.c:271 +#: ../../keyboard.pm_.c:250 msgid "Thai keyboard" msgstr "泰国键盘" -#: ../../keyboard.pm_.c:273 +#: ../../keyboard.pm_.c:252 msgid "Tajik keyboard" msgstr "泰国语" -#: ../../keyboard.pm_.c:274 +#: ../../keyboard.pm_.c:253 msgid "Turkish (traditional \"F\" model)" msgstr "土耳其 (传统 \"F\" 式)" -#: ../../keyboard.pm_.c:275 +#: ../../keyboard.pm_.c:254 msgid "Turkish (modern \"Q\" model)" msgstr "土耳其 (现代 \"Q\" 式)" -#: ../../keyboard.pm_.c:277 +#: ../../keyboard.pm_.c:256 msgid "Ukrainian" msgstr "乌克兰" -#: ../../keyboard.pm_.c:280 +#: ../../keyboard.pm_.c:259 msgid "US keyboard (international)" msgstr "美式键盘 (国际)" -#: ../../keyboard.pm_.c:281 +#: ../../keyboard.pm_.c:260 msgid "Vietnamese \"numeric row\" QWERTY" msgstr "越南键盘 \"number row\" QWERTY" -#: ../../keyboard.pm_.c:282 +#: ../../keyboard.pm_.c:261 msgid "Yugoslavian (latin)" msgstr "南斯拉夫 (拉丁)" -#: ../../keyboard.pm_.c:289 +#: ../../keyboard.pm_.c:268 msgid "Right Alt key" msgstr "右边的 ALT 键" -#: ../../keyboard.pm_.c:290 +#: ../../keyboard.pm_.c:269 msgid "Both Shift keys simultaneously" msgstr "同时按两个 Shift 键" -#: ../../keyboard.pm_.c:291 +#: ../../keyboard.pm_.c:270 msgid "Control and Shift keys simultaneously" msgstr "同时按 Ctrl 和 Shift 键" -#: ../../keyboard.pm_.c:292 +#: ../../keyboard.pm_.c:271 msgid "CapsLock key" msgstr "CapsLock 键" -#: ../../keyboard.pm_.c:293 +#: ../../keyboard.pm_.c:272 msgid "Ctrl and Alt keys simultaneously" msgstr "同时按 Ctrl 和 Alt 键" -#: ../../keyboard.pm_.c:294 +#: ../../keyboard.pm_.c:273 msgid "Alt and Shift keys simultaneously" msgstr "同时按 Alt 和 Shift 键" -#: ../../keyboard.pm_.c:295 +#: ../../keyboard.pm_.c:274 msgid "\"Menu\" key" msgstr "\"菜单\"键" -#: ../../keyboard.pm_.c:296 +#: ../../keyboard.pm_.c:275 msgid "Left \"Windows\" key" msgstr "左 \"窗口\" 键" -#: ../../keyboard.pm_.c:297 +#: ../../keyboard.pm_.c:276 msgid "Right \"Windows\" key" msgstr "右 \"窗口\" 键" @@ -6323,11 +6392,11 @@ msgstr " msgid "GlidePoint" msgstr "GlidePoint" -#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:63 +#: ../../mouse.pm_.c:36 ../../mouse.pm_.c:65 msgid "Kensington Thinking Mouse" msgstr "Kensington Thinking Mouse" -#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:59 +#: ../../mouse.pm_.c:37 ../../mouse.pm_.c:61 msgid "Genius NetMouse" msgstr "Genius NetMouse" @@ -6335,115 +6404,123 @@ msgstr "Genius NetMouse" msgid "Genius NetScroll" msgstr "Genius NetScroll" -#: ../../mouse.pm_.c:43 ../../mouse.pm_.c:68 +#: ../../mouse.pm_.c:39 ../../mouse.pm_.c:48 +msgid "Microsoft Explorer" +msgstr "微软浏览器" + +#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:70 msgid "1 button" msgstr "单 键" -#: ../../mouse.pm_.c:44 ../../mouse.pm_.c:51 +#: ../../mouse.pm_.c:45 ../../mouse.pm_.c:53 msgid "Generic 2 Button Mouse" msgstr "普通 2 键鼠标" -#: ../../mouse.pm_.c:46 +#: ../../mouse.pm_.c:47 msgid "Wheel" msgstr "滚轮" -#: ../../mouse.pm_.c:49 +#: ../../mouse.pm_.c:51 msgid "serial" msgstr "串行" -#: ../../mouse.pm_.c:52 +#: ../../mouse.pm_.c:54 msgid "Generic 3 Button Mouse" msgstr "普通 3 键鼠标" -#: ../../mouse.pm_.c:53 +#: ../../mouse.pm_.c:55 msgid "Microsoft IntelliMouse" msgstr "微软智能鼠标" -#: ../../mouse.pm_.c:54 +#: ../../mouse.pm_.c:56 msgid "Logitech MouseMan" msgstr "罗技 MouseMan" -#: ../../mouse.pm_.c:55 +#: ../../mouse.pm_.c:57 msgid "Mouse Systems" msgstr "Mouse Systems" -#: ../../mouse.pm_.c:57 +#: ../../mouse.pm_.c:59 msgid "Logitech CC Series" msgstr "Logitech CC Series" -#: ../../mouse.pm_.c:58 +#: ../../mouse.pm_.c:60 msgid "Logitech MouseMan+/FirstMouse+" msgstr "Logitech MouseMan+/FirstMouse+" -#: ../../mouse.pm_.c:60 +#: ../../mouse.pm_.c:62 msgid "MM Series" msgstr "MM Series" -#: ../../mouse.pm_.c:61 +#: ../../mouse.pm_.c:63 msgid "MM HitTablet" msgstr "MM HitTablet" -#: ../../mouse.pm_.c:62 +#: ../../mouse.pm_.c:64 msgid "Logitech Mouse (serial, old C7 type)" msgstr "Logitech Mouse (serial, old C7 type)" -#: ../../mouse.pm_.c:66 +#: ../../mouse.pm_.c:68 msgid "busmouse" msgstr "busmouse" -#: ../../mouse.pm_.c:69 +#: ../../mouse.pm_.c:71 msgid "2 buttons" msgstr "2 键" -#: ../../mouse.pm_.c:70 +#: ../../mouse.pm_.c:72 msgid "3 buttons" msgstr "3 键" -#: ../../mouse.pm_.c:73 +#: ../../mouse.pm_.c:75 msgid "none" msgstr "没有" -#: ../../mouse.pm_.c:75 +#: ../../mouse.pm_.c:77 msgid "No mouse" msgstr "没有鼠标" -#: ../../mouse.pm_.c:445 +#: ../../mouse.pm_.c:482 msgid "Please test the mouse" msgstr "请测试您的鼠标." -#: ../../mouse.pm_.c:446 +#: ../../mouse.pm_.c:483 msgid "To activate the mouse," msgstr "要激活鼠标," -#: ../../mouse.pm_.c:447 +#: ../../mouse.pm_.c:484 msgid "MOVE YOUR WHEEL!" msgstr "转动滚轮!" -#: ../../my_gtk.pm_.c:156 +#: ../../my_gtk.pm_.c:64 +msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" +msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*" + +#: ../../my_gtk.pm_.c:159 msgid "Finish" msgstr "完成" -#: ../../my_gtk.pm_.c:156 ../../printerdrake.pm_.c:1992 +#: ../../my_gtk.pm_.c:159 ../../printerdrake.pm_.c:2126 msgid "Next ->" msgstr "下一步 ->" -#: ../../my_gtk.pm_.c:284 +#: ../../my_gtk.pm_.c:287 msgid "Is this correct?" msgstr "这样正确吗?" -#: ../../my_gtk.pm_.c:356 ../../services.pm_.c:222 +#: ../../my_gtk.pm_.c:359 ../../services.pm_.c:222 msgid "Info" msgstr "信息" -#: ../../my_gtk.pm_.c:377 +#: ../../my_gtk.pm_.c:380 msgid "Expand Tree" msgstr "展开分类树" -#: ../../my_gtk.pm_.c:378 +#: ../../my_gtk.pm_.c:381 msgid "Collapse Tree" msgstr "收缩分类树" -#: ../../my_gtk.pm_.c:379 +#: ../../my_gtk.pm_.c:382 msgid "Toggle between flat and group sorted" msgstr "切换平铺或分组排列" @@ -6481,6 +6558,73 @@ msgstr "使 msgid "use pptp" msgstr "使用 pptp" +#: ../../network/drakfirewall.pm_.c:12 +msgid "Web Server" +msgstr "WEB 服务器" + +#: ../../network/drakfirewall.pm_.c:17 +msgid "Domain Name Server" +msgstr "域名服务器" + +#: ../../network/drakfirewall.pm_.c:32 +msgid "Mail Server" +msgstr "邮件服务器" + +#: ../../network/drakfirewall.pm_.c:37 +msgid "POP and IMAP Server" +msgstr "POP 和 IMAP 服务器" + +#: ../../network/drakfirewall.pm_.c:111 +msgid "No network card" +msgstr "没有网络卡" + +#: ../../network/drakfirewall.pm_.c:129 +msgid "" +"drakfirewall configurator\n" +"\n" +"This configures a personal firewall for this Mandrake Linux machine.\n" +"For a powerful dedicated firewall solution, please look to the\n" +"specialized MandrakeSecurity Firewall distribution." +msgstr "" +"drakfirewall 防火墙配置\n" +"\n" +"这个程序为您的 Mandrake Linux 机器配置个人防火墙.\n" +"如果要配置强大的专用防火墙, 请考虑使用专门的\n" +"MandrakeSecurity 防火墙发行版." + +#: ../../network/drakfirewall.pm_.c:147 +msgid "Which services would you like to allow the Internet to connect to?" +msgstr "您想要允许互联网连接到哪些服务?" + +#: ../../network/drakfirewall.pm_.c:148 +msgid "" +"You can enter miscellaneous ports. \n" +"Valid examples are: 139/tcp 139/udp.\n" +"Have a look at /etc/services for information." +msgstr "" +"您可以输入各种端口. \n" +"例如, 可以这样: 139/tcp 139/udp.\n" +"请参考 /etc/services 文件." + +#: ../../network/drakfirewall.pm_.c:154 +#, c-format +msgid "" +"Invalid port given: %s.\n" +"The proper format is \"port/tcp\" or \"port/udp\", \n" +"where port is between 1 and 65535." +msgstr "" +"指定的端口无效: %s.\n" +"正确的格式是 \"port/tcp\" 或 \"port/udp\", \n" +"其中 port 要在 1 和 65535 之间." + +#: ../../network/drakfirewall.pm_.c:162 +msgid "Everything (no firewall)" +msgstr "全部 (不过滤)" + +#: ../../network/drakfirewall.pm_.c:164 +msgid "Other ports" +msgstr "其它端口" + #: ../../network/ethernet.pm_.c:37 msgid "" "Which dhcp client do you want to use?\n" @@ -6497,7 +6641,7 @@ msgstr "" "没有在您的系统里发现以太网卡. \n" "无法设置这个连接类型." -#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:247 +#: ../../network/ethernet.pm_.c:92 ../../standalone/drakgw_.c:240 msgid "Choose the network interface" msgstr "选择网络接口" @@ -6510,7 +6654,7 @@ msgstr " msgid "no network card found" msgstr "找不到网络卡" -#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:365 +#: ../../network/ethernet.pm_.c:202 ../../network/network.pm_.c:366 msgid "Configuring network" msgstr "正在配置网络" @@ -6526,7 +6670,7 @@ msgstr "" "您的主机名称必需是个完全限定主机名字，\n" "例如 ``mybox.mylab.myco.com''" -#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:370 +#: ../../network/ethernet.pm_.c:207 ../../network/network.pm_.c:371 msgid "Host name" msgstr "主机名字" @@ -6822,13 +6966,13 @@ msgstr "选 msgid "Use auto detection" msgstr "使用自动检测" -#: ../../network/netconnect.pm_.c:172 ../../printerdrake.pm_.c:2930 +#: ../../network/netconnect.pm_.c:172 ../../printerdrake.pm_.c:3151 #: ../../standalone/drakconnect_.c:274 ../../standalone/drakconnect_.c:277 #: ../../standalone/drakfloppy_.c:145 msgid "Expert Mode" msgstr "专家模式" -#: ../../network/netconnect.pm_.c:178 ../../printerdrake.pm_.c:283 +#: ../../network/netconnect.pm_.c:178 ../../printerdrake.pm_.c:386 msgid "Detecting devices..." msgstr "正在探测设备..." @@ -6990,11 +7134,11 @@ msgstr " msgid "Start at boot" msgstr "开机时启动" -#: ../../network/network.pm_.c:336 ../../printerdrake.pm_.c:753 +#: ../../network/network.pm_.c:336 ../../printerdrake.pm_.c:860 msgid "IP address should be in format 1.2.3.4" msgstr "IP 地址的格式应该是 1.2.3.4" -#: ../../network/network.pm_.c:366 +#: ../../network/network.pm_.c:367 msgid "" "Please enter your host name.\n" "Your host name should be a fully-qualified host name,\n" @@ -7005,43 +7149,55 @@ msgstr "" "您的主机名称必需是个完全限定的名称，例如 ``mybox.mylab.myco.com''\n" "如果您有网关的话，也请输入其 IP 地址" -#: ../../network/network.pm_.c:371 +#: ../../network/network.pm_.c:372 msgid "DNS server" msgstr "DNS 服务器" -#: ../../network/network.pm_.c:372 +#: ../../network/network.pm_.c:373 #, c-format msgid "Gateway (e.g. %s)" msgstr "网关 (如 %s )" -#: ../../network/network.pm_.c:374 +#: ../../network/network.pm_.c:375 msgid "Gateway device" msgstr "网关设备" -#: ../../network/network.pm_.c:386 +#: ../../network/network.pm_.c:387 msgid "Proxies configuration" msgstr "代理服务器配置" -#: ../../network/network.pm_.c:387 +#: ../../network/network.pm_.c:388 msgid "HTTP proxy" msgstr "HTTP 代理服务器" -#: ../../network/network.pm_.c:388 +#: ../../network/network.pm_.c:389 msgid "FTP proxy" msgstr "FTP 代理服务器" -#: ../../network/network.pm_.c:389 +#: ../../network/network.pm_.c:390 msgid "Track network card id (useful for laptops)" msgstr "记录网卡标志" -#: ../../network/network.pm_.c:392 +#: ../../network/network.pm_.c:393 msgid "Proxy should be http://..." msgstr "代理服务器应该是象 http://..." -#: ../../network/network.pm_.c:393 +#: ../../network/network.pm_.c:394 msgid "Proxy should be ftp://..." msgstr "代理服务器应该是象 ftp://..." +#: ../../network/shorewall.pm_.c:24 +msgid "Firewalling configuration detected!" +msgstr "发现防火墙配置!" + +#: ../../network/shorewall.pm_.c:25 +msgid "" +"Warning! An existing firewalling configuration has been detected. You may " +"need some manual fix after installation." +msgstr "" +"警告! 发现原来的配置利用了防火墙功能.\n" +"您需要在安装之后手工修改." + #: ../../network/tools.pm_.c:41 msgid "Internet configuration" msgstr "互联网设定" @@ -7147,15 +7303,15 @@ msgstr " msgid "United Kingdom" msgstr "英国" -#: ../../partition_table.pm_.c:606 +#: ../../partition_table.pm_.c:602 msgid "mount failed: " msgstr "装载失败: " -#: ../../partition_table.pm_.c:670 +#: ../../partition_table.pm_.c:666 msgid "Extended partition not supported on this platform" msgstr "这个平台上不支持扩展分区" -#: ../../partition_table.pm_.c:688 +#: ../../partition_table.pm_.c:684 msgid "" "You have a hole in your partition table but I can't use it.\n" "The only solution is to move your primary partitions to have the hole next " @@ -7164,21 +7320,21 @@ msgstr "" "分区表里有一段是空的, 可是我没法使用它.\n" "唯一的办法是移动您的主分区, 把空闲部分换到与扩展分区相邻的位置." -#: ../../partition_table.pm_.c:778 +#: ../../partition_table.pm_.c:774 #, c-format msgid "Restoring from file %s failed: %s" msgstr "从文件 %s 恢复失败: %s" -#: ../../partition_table.pm_.c:780 +#: ../../partition_table.pm_.c:776 msgid "Bad backup file" msgstr "错误的备份文件" -#: ../../partition_table.pm_.c:802 +#: ../../partition_table.pm_.c:798 #, c-format msgid "Error writing to file %s" msgstr "写入文件 %s 失败" -#: ../../partition_table/raw.pm_.c:187 +#: ../../partition_table/raw.pm_.c:189 msgid "" "Something bad is happening on your drive. \n" "A test to check the integrity of data has failed. \n" @@ -7224,150 +7380,154 @@ msgstr "LPD - msgid "PDQ - Print, Don't Queue" msgstr "PDQ - 打印， 不排队列" -#: ../../printer.pm_.c:35 ../../printer.pm_.c:854 +#: ../../printer.pm_.c:34 ../../printer.pm_.c:1125 msgid "CUPS" msgstr "CUPS" -#: ../../printer.pm_.c:36 +#: ../../printer.pm_.c:35 msgid "LPRng" msgstr "LPRng" -#: ../../printer.pm_.c:37 +#: ../../printer.pm_.c:36 msgid "LPD" msgstr "LPD" -#: ../../printer.pm_.c:38 +#: ../../printer.pm_.c:37 msgid "PDQ" msgstr "PDQ" -#: ../../printer.pm_.c:50 +#: ../../printer.pm_.c:49 msgid "Local printer" msgstr "本机打印机" -#: ../../printer.pm_.c:51 +#: ../../printer.pm_.c:50 msgid "Remote printer" msgstr "远程打印机" -#: ../../printer.pm_.c:52 +#: ../../printer.pm_.c:51 msgid "Printer on remote CUPS server" msgstr "远程 CUPS 服务器的打印机" -#: ../../printer.pm_.c:53 ../../printerdrake.pm_.c:776 +#: ../../printer.pm_.c:52 ../../printerdrake.pm_.c:883 msgid "Printer on remote lpd server" msgstr "远端 lpd 服务器的打印机" -#: ../../printer.pm_.c:54 +#: ../../printer.pm_.c:53 msgid "Network printer (TCP/Socket)" msgstr "网络打印机 (TCP/Socket)" -#: ../../printer.pm_.c:55 +#: ../../printer.pm_.c:54 msgid "Printer on SMB/Windows 95/98/NT server" msgstr "SMB/Windows 95/98/NT上的打印机" -#: ../../printer.pm_.c:56 +#: ../../printer.pm_.c:55 msgid "Printer on NetWare server" msgstr "Novell服务器打印机" -#: ../../printer.pm_.c:57 ../../printerdrake.pm_.c:780 +#: ../../printer.pm_.c:56 ../../printerdrake.pm_.c:887 msgid "Enter a printer device URI" msgstr "打印机设备URI" -#: ../../printer.pm_.c:58 +#: ../../printer.pm_.c:57 msgid "Pipe job into a command" msgstr "作业pipe定向到命令" -#: ../../printer.pm_.c:487 ../../printer.pm_.c:678 ../../printer.pm_.c:1000 -#: ../../printerdrake.pm_.c:2070 ../../printerdrake.pm_.c:3189 +#: ../../printer.pm_.c:324 ../../printer.pm_.c:366 ../../printer.pm_.c:533 +msgid "Unknown Model" +msgstr "未知型号" + +#: ../../printer.pm_.c:735 ../../printer.pm_.c:926 ../../printer.pm_.c:1318 +#: ../../printerdrake.pm_.c:2260 ../../printerdrake.pm_.c:3414 msgid "Unknown model" msgstr "未知模式" -#: ../../printer.pm_.c:515 +#: ../../printer.pm_.c:763 msgid "Local Printers" msgstr "本机打印机" -#: ../../printer.pm_.c:517 ../../printer.pm_.c:855 +#: ../../printer.pm_.c:765 ../../printer.pm_.c:1126 msgid "Remote Printers" msgstr "远程打印机" -#: ../../printer.pm_.c:524 ../../printerdrake.pm_.c:301 +#: ../../printer.pm_.c:772 ../../printerdrake.pm_.c:404 #, c-format msgid " on parallel port \\/*%s" msgstr " 并行口 \\/*%s" -#: ../../printer.pm_.c:527 ../../printerdrake.pm_.c:303 +#: ../../printer.pm_.c:775 ../../printerdrake.pm_.c:406 #, c-format msgid ", USB printer \\/*%s" msgstr ", USB 打印机 \\/*%s" -#: ../../printer.pm_.c:532 +#: ../../printer.pm_.c:780 #, c-format msgid ", multi-function device on parallel port \\/*%s" msgstr ", 并行端口上的多功能设备 \\/*%s" -#: ../../printer.pm_.c:535 +#: ../../printer.pm_.c:783 msgid ", multi-function device on USB" msgstr ", USB 端口上的多功能设备" -#: ../../printer.pm_.c:537 +#: ../../printer.pm_.c:785 msgid ", multi-function device on HP JetDirect" msgstr ", HP JetDirect 打印服务器上的多功能设备" -#: ../../printer.pm_.c:539 +#: ../../printer.pm_.c:787 msgid ", multi-function device" msgstr ", 多功能设备" -#: ../../printer.pm_.c:542 +#: ../../printer.pm_.c:790 #, c-format msgid ", printing to %s" msgstr ", 打印到 %s" -#: ../../printer.pm_.c:544 +#: ../../printer.pm_.c:792 #, c-format msgid " on LPD server \"%s\", printer \"%s\"" msgstr "LPD 服务器 \"%s\" 上的打印机 \"%s\"" -#: ../../printer.pm_.c:546 +#: ../../printer.pm_.c:794 #, c-format msgid ", TCP/IP host \"%s\", port %s" msgstr ", TCP/IP 主机 \"%s\", 端口 %s" -#: ../../printer.pm_.c:550 +#: ../../printer.pm_.c:798 #, c-format msgid " on SMB/Windows server \"%s\", share \"%s\"" msgstr "SMB/Windows 服务器 \"%s\" 上的共享 \"%s\"" -#: ../../printer.pm_.c:554 +#: ../../printer.pm_.c:802 #, c-format msgid " on Novell server \"%s\", printer \"%s\"" msgstr "Novell 打印服务器 \"%s\"上的打印机 \"%s\"" -#: ../../printer.pm_.c:556 +#: ../../printer.pm_.c:804 #, c-format msgid ", using command %s" msgstr ", 使用命令 %s" -#: ../../printer.pm_.c:675 ../../printerdrake.pm_.c:1540 +#: ../../printer.pm_.c:923 ../../printerdrake.pm_.c:1656 msgid "Raw printer (No driver)" msgstr "直接打印输出 (不使用驱动程序)" -#: ../../printer.pm_.c:824 +#: ../../printer.pm_.c:1095 #, c-format msgid "(on %s)" msgstr "(在 %s)" -#: ../../printer.pm_.c:826 +#: ../../printer.pm_.c:1097 msgid "(on this machine)" msgstr "(在该机器上)" -#: ../../printer.pm_.c:851 +#: ../../printer.pm_.c:1122 #, c-format msgid "On CUPS server \"%s\"" msgstr "在 CUPS 服务器 \"%s\"" -#: ../../printer.pm_.c:857 ../../printerdrake.pm_.c:2851 -#: ../../printerdrake.pm_.c:2862 ../../printerdrake.pm_.c:3078 -#: ../../printerdrake.pm_.c:3130 ../../printerdrake.pm_.c:3156 -#: ../../printerdrake.pm_.c:3326 ../../printerdrake.pm_.c:3328 +#: ../../printer.pm_.c:1128 ../../printerdrake.pm_.c:3071 +#: ../../printerdrake.pm_.c:3082 ../../printerdrake.pm_.c:3303 +#: ../../printerdrake.pm_.c:3355 ../../printerdrake.pm_.c:3381 +#: ../../printerdrake.pm_.c:3556 ../../printerdrake.pm_.c:3558 msgid " (Default)" msgstr " (缺省)" @@ -7392,11 +7552,11 @@ msgstr "" msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" msgstr "打印机自动检测 (本地, TCP/Socket 和 SMB 打印机)" -#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:2914 +#: ../../printerdrake.pm_.c:84 ../../printerdrake.pm_.c:3135 msgid "CUPS configuration" msgstr "CUPS 打印配置" -#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:2915 +#: ../../printerdrake.pm_.c:85 ../../printerdrake.pm_.c:3136 msgid "Specify CUPS server" msgstr "指定 CUPS 打印服务器" @@ -7435,7 +7595,7 @@ msgstr "" msgid "The IP address should look like 192.168.1.20" msgstr "IP 地址的格式应该是象 1.2.3.4" -#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:987 +#: ../../printerdrake.pm_.c:95 ../../printerdrake.pm_.c:1094 msgid "The port number should be an integer!" msgstr "端口须为数字!" @@ -7443,7 +7603,7 @@ msgstr " msgid "CUPS server IP" msgstr "CUPS 服务器 IP" -#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1007 +#: ../../printerdrake.pm_.c:103 ../../printerdrake.pm_.c:1114 msgid "Port" msgstr "端口" @@ -7451,42 +7611,169 @@ msgstr " msgid "Automatic CUPS configuration" msgstr "CUPS自动步骤配置" -#: ../../printerdrake.pm_.c:183 ../../printerdrake.pm_.c:192 -#: ../../printerdrake.pm_.c:2897 ../../printerdrake.pm_.c:3017 -msgid "Add a new printer" -msgstr "增加打印机" +#: ../../printerdrake.pm_.c:177 ../../printerdrake.pm_.c:247 +#: ../../printerdrake.pm_.c:1529 ../../printerdrake.pm_.c:1533 +#: ../../printerdrake.pm_.c:1651 ../../printerdrake.pm_.c:2203 +#: ../../printerdrake.pm_.c:2356 ../../printerdrake.pm_.c:2415 +#: ../../printerdrake.pm_.c:2488 ../../printerdrake.pm_.c:2509 +#: ../../printerdrake.pm_.c:2699 ../../printerdrake.pm_.c:2740 +#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2779 +#: ../../printerdrake.pm_.c:2784 ../../printerdrake.pm_.c:2821 +#: ../../printerdrake.pm_.c:2874 ../../printerdrake.pm_.c:2894 +#: ../../printerdrake.pm_.c:2908 ../../printerdrake.pm_.c:2942 +#: ../../printerdrake.pm_.c:2988 ../../printerdrake.pm_.c:3006 +#: ../../printerdrake.pm_.c:3095 ../../printerdrake.pm_.c:3169 +#: ../../printerdrake.pm_.c:3471 ../../printerdrake.pm_.c:3526 +#: ../../printerdrake.pm_.c:3579 ../../standalone/printerdrake_.c:57 +msgid "Printerdrake" +msgstr "打印机配置向导" + +#: ../../printerdrake.pm_.c:178 +msgid "Checking your system..." +msgstr "检查您的系统 ..." + +#: ../../printerdrake.pm_.c:186 +msgid "" +"There are no printers found which are directly connected to your machine" +msgstr "没有发现打印机直接连接在您的机器上" -#: ../../printerdrake.pm_.c:184 +#: ../../printerdrake.pm_.c:198 msgid "" +"The following printers\n" "\n" -"Welcome to the Printer Setup Wizard\n" +msgstr "" +"下列软件包将要被卸载\n" "\n" -"This wizard allows you to install local or remote printers to be used from " -"this machine and also from other machines in the network.\n" + +#: ../../printerdrake.pm_.c:199 +msgid "" +"The following printer\n" "\n" -"It asks you for all necessary information to set up the printer and gives " -"you access to all available printer drivers, driver options, and printer " -"connection types." msgstr "" +"下列打印机\n" "\n" -"欢迎使用打印机设置精灵\n" -"\n" -"帮助您设置本机或网络上的打印机." -#: ../../printerdrake.pm_.c:193 +#: ../../printerdrake.pm_.c:201 msgid "" "\n" -"Welcome to the Printer Setup Wizard\n" +"and one unknown printer are " +msgstr "" "\n" -"This wizard will help you to install your printer(s) connected to this " -"computer, connected directly to the network or to a remote Windows machine.\n" +"以及一个未知的打印机 " + +#: ../../printerdrake.pm_.c:203 +#, c-format +msgid "" "\n" -"If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that they can be auto-detected. Also " -"your network printer(s) and you Windows machines must be connected and " -"turned on.\n" +"and %d unknown printers are " +msgstr "" "\n" -"Note that auto-detecting printers on the network takes longer than the auto-" +"和 %d 个未知的打印机 " + +#: ../../printerdrake.pm_.c:207 +msgid "" +"\n" +"are " +msgstr "" +"\n" +" " + +#: ../../printerdrake.pm_.c:208 +msgid "" +"\n" +"is " +msgstr "" +"\n" +" " + +#: ../../printerdrake.pm_.c:210 +msgid "directly connected to your system" +msgstr "直接连接在您的系统" + +#: ../../printerdrake.pm_.c:213 +msgid "" +"\n" +"There is one unknown printer directly connected to your system" +msgstr "" +"\n" +"有一个未知的打印机直接连接在您的系统" + +#: ../../printerdrake.pm_.c:215 +#, c-format +msgid "" +"\n" +"There are %d unknown printers directly connected to your system" +msgstr "" +"\n" +"有 %d 个未知的打印机直接连接在您的系统" + +#: ../../printerdrake.pm_.c:221 +msgid " (Make sure that all your printers are connected and turned on).\n" +msgstr " (请确认您的打印机已经连接好并且接通了电源).\n" + +#: ../../printerdrake.pm_.c:235 +msgid "" +"Do you want to enable printing on the printers mentioned above or on " +"printers in the local network?\n" +msgstr "您想激活上述打印机的打印功能, 还是要使用本地网络的打印机来打印?\n" + +#: ../../printerdrake.pm_.c:236 +msgid "Do you want to enable printing on printers in the local network?\n" +msgstr "您想使用本地网络的打印机来打印吗?\n" + +#: ../../printerdrake.pm_.c:238 +msgid "Do you want to enable printing on the printers mentioned above?\n" +msgstr "您是否希望在上述的打印机上进行打印?\n" + +#: ../../printerdrake.pm_.c:239 +msgid "Are you sure that you want to set up printing on this machine?\n" +msgstr "您确定要在这台机器上设置打印吗?\n" + +#: ../../printerdrake.pm_.c:240 +#, c-format +msgid "" +"NOTE: Depending on the printer model and the printing system up to %d MB of " +"additional software will be installed." +msgstr "" +"注意: 根据不同的打印机型号和打印系统, 需要安装附加的软件, 最多会需要 %d MB 空" +"间." + +#: ../../printerdrake.pm_.c:269 ../../printerdrake.pm_.c:278 +#: ../../printerdrake.pm_.c:3117 ../../printerdrake.pm_.c:3242 +msgid "Add a new printer" +msgstr "增加打印机" + +#: ../../printerdrake.pm_.c:270 +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard allows you to install local or remote printers to be used from " +"this machine and also from other machines in the network.\n" +"\n" +"It asks you for all necessary information to set up the printer and gives " +"you access to all available printer drivers, driver options, and printer " +"connection types." +msgstr "" +"\n" +"欢迎使用打印机设置精灵\n" +"\n" +"帮助您设置本机或网络上的打印机." + +#: ../../printerdrake.pm_.c:280 +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer, connected directly to the network or to a remote Windows machine.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) and you Windows machines must be connected and " +"turned on.\n" +"\n" +"Note that auto-detecting printers on the network takes longer than the auto-" "detection of only the printers connected to this machine. So turn off the " "auto-detection of network and/or Windows-hosted printers when you don't need " "it.\n" @@ -7501,14 +7788,38 @@ msgstr "" "在远程的 Windows 机器上.\n" "\n" "如果您的打印机要直接连在这台电脑, 请把它(们)插接到 这台电脑并打开电源, 这样才" -"能自动检测. 而 您的网络打印机或 Windows 机器也必须连接好 并且开电.\n" +"能自动检测. 您的网络打印机和您的 Windows 机器也要连接好并开通电源.\n" "\n" "注意自动检测网络上的打印机比检测连接在本机的打印机花费时间要长. 如果 您不需" "要, 请关闭对网络打印机或Windows打印机的自动检测.\n" "\n" "准备好就点击 \"下一步\" , 如果您不想现在配置打印机, 点击 \"取消\"." -#: ../../printerdrake.pm_.c:202 +#: ../../printerdrake.pm_.c:289 ../../printerdrake.pm_.c:306 +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " +"want to set up your printer(s) now." +msgstr "" +"\n" +"打印机配置精灵欢迎您!\n" +"\n" +"我将帮助您配置直接连接在这台电脑的打印机.\n" +"\n" +"如果您的打印机直接连在这台电脑, 请把它(们)插接到 这台电脑并打开电源, 这样才能" +"自动检测.\n" +"\n" +"准备好就点击 \"下一步\" , 如果您不想现在配置打印机, 点击 \"取消\"." + +#: ../../printerdrake.pm_.c:297 msgid "" "\n" "Welcome to the Printer Setup Wizard\n" @@ -7517,7 +7828,7 @@ msgid "" "computer or connected directly to the network.\n" "\n" "If you have printer(s) connected to this machine, Please plug it/them in on " -"this computer and turn it/them on so that they can be auto-detected. Also " +"this computer and turn it/them on so that it/they can be auto-detected. Also " "your network printer(s) must be connected and turned on.\n" "\n" "Note that auto-detecting printers on the network takes longer than the auto-" @@ -7530,35 +7841,34 @@ msgstr "" "\n" "打印机配置精灵欢迎您!\n" "\n" -"我将帮助您配置您的打印机, 不论是直接连接在 这台电脑, 直接连接在网络, 还是连接" -"在远程的 Windows 机器上.\n" +"我将帮助您配置您的打印机, 不论是连接在 这台电脑, 还是直接连接在网络.\n" "\n" "如果您的打印机要直接连在这台电脑, 请把它(们)插接到 这台电脑并打开电源, 这样才" -"能自动检测. 而 您的网络打印机或 Windows 机器也必须连接好 并且开电.\n" +"能自动检测. 您的网络打印机也要连接好并开通电源..\n" "\n" "注意自动检测网络上的打印机比检测连接在本机的打印机花费时间要长. 如果 您不需" -"要, 请关闭对网络打印机或Windows打印机的自动检测.\n" +"要, 请关闭对网络打印机的自动检测.\n" "\n" "准备好就点击 \"下一步\" , 如果您不想现在配置打印机, 点击 \"取消\"." -#: ../../printerdrake.pm_.c:213 +#: ../../printerdrake.pm_.c:315 msgid "Auto-detect printers connected to this machine" msgstr "自动探测这台机器连接的打印机" -#: ../../printerdrake.pm_.c:215 +#: ../../printerdrake.pm_.c:318 msgid "Auto-detect printers connected directly to the local network" msgstr "自动探测直接连接到本地网络的打印机" -#: ../../printerdrake.pm_.c:218 +#: ../../printerdrake.pm_.c:321 msgid "Auto-detect printers connected to machines running Microsoft Windows" msgstr "自动探测运行 Microsoft Windows 的机器连接的打印机" -#: ../../printerdrake.pm_.c:245 ../../printerdrake.pm_.c:459 -#: ../../printerdrake.pm_.c:484 +#: ../../printerdrake.pm_.c:348 ../../printerdrake.pm_.c:562 +#: ../../printerdrake.pm_.c:587 msgid "Local Printer" msgstr "本机打印机" -#: ../../printerdrake.pm_.c:246 +#: ../../printerdrake.pm_.c:349 msgid "" "\n" "Congratulations, your printer is now installed and configured!\n" @@ -7579,49 +7889,49 @@ msgstr "" "如果以后要添加, 删除打印机, 改变打印机名字, 或者需要修改缺省打印参数 (进纸" "盘, 输出质量, ...), 在 Mandrake 控制中心的 \"硬件\"部分选择\"打印机\"." -#: ../../printerdrake.pm_.c:283 ../../printerdrake.pm_.c:474 -#: ../../printerdrake.pm_.c:683 ../../printerdrake.pm_.c:923 +#: ../../printerdrake.pm_.c:386 ../../printerdrake.pm_.c:577 +#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030 msgid "Printer auto-detection" msgstr "打印机自动检测" -#: ../../printerdrake.pm_.c:305 +#: ../../printerdrake.pm_.c:408 #, c-format msgid ", network printer \"%s\", port %s" msgstr ", 网络打印机 \"%s\", 端口 %s" -#: ../../printerdrake.pm_.c:307 +#: ../../printerdrake.pm_.c:410 #, c-format msgid ", printer \"%s\" on SMB/Windows server \"%s\"" msgstr ", 打印机 \"%s\" 在 SMB/Windows 服务器 \"%s\" 上" -#: ../../printerdrake.pm_.c:313 +#: ../../printerdrake.pm_.c:416 #, c-format msgid "Detected %s" msgstr "检测到 %s" -#: ../../printerdrake.pm_.c:317 ../../printerdrake.pm_.c:348 -#: ../../printerdrake.pm_.c:367 +#: ../../printerdrake.pm_.c:420 ../../printerdrake.pm_.c:451 +#: ../../printerdrake.pm_.c:470 #, c-format msgid "Printer on parallel port \\/*%s" msgstr "并行端口打印机 \\/*%s" -#: ../../printerdrake.pm_.c:319 ../../printerdrake.pm_.c:350 -#: ../../printerdrake.pm_.c:372 +#: ../../printerdrake.pm_.c:422 ../../printerdrake.pm_.c:453 +#: ../../printerdrake.pm_.c:475 #, c-format msgid "USB printer \\/*%s" msgstr "USB 打印机 \\/*%s" -#: ../../printerdrake.pm_.c:321 +#: ../../printerdrake.pm_.c:424 #, c-format msgid "Network printer \"%s\", port %s" msgstr "网络打印机 \"%s\", 端口 %s" -#: ../../printerdrake.pm_.c:323 +#: ../../printerdrake.pm_.c:426 #, c-format msgid "Printer \"%s\" on SMB/Windows server \"%s\"" msgstr "打印机 \"%s\" 在 SMB/Windows 服务器打印机 \"%s\" 上" -#: ../../printerdrake.pm_.c:460 +#: ../../printerdrake.pm_.c:563 msgid "" "No local printer found! To manually install a printer enter a device name/" "file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " @@ -7632,19 +7942,19 @@ msgstr "" "lp0, /dev/lp1, ..., 相当于 LPT1:, LPT2:, ..., 第一个 USB 打印机: /dev/usb/" "lp0, 第二个 USB 打印机: /dev/usb/lp1, ...)." -#: ../../printerdrake.pm_.c:464 +#: ../../printerdrake.pm_.c:567 msgid "You must enter a device or file name!" msgstr "您需要输入打印机设备名或一文件名!" -#: ../../printerdrake.pm_.c:475 +#: ../../printerdrake.pm_.c:578 msgid "No printer found!" msgstr "没有发现打印机!" -#: ../../printerdrake.pm_.c:485 +#: ../../printerdrake.pm_.c:588 msgid "Available printers" msgstr "可用打印机" -#: ../../printerdrake.pm_.c:489 +#: ../../printerdrake.pm_.c:592 msgid "" "The following printer was auto-detected, if it is not the one you want to " "configure, enter a device name/file name in the input line" @@ -7652,7 +7962,7 @@ msgstr "" "自动检测发现了下列打印机, 如果您要使用的打印机不在其中请在输入行输入一个设备" "名或文件名" -#: ../../printerdrake.pm_.c:490 +#: ../../printerdrake.pm_.c:593 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up or enter a device name/file name in the input line" @@ -7660,7 +7970,7 @@ msgstr "" "自动检测发现了下列打印机, 请选择您要使用的打印机, 或者在输入行输入一个设备名" "或文件名" -#: ../../printerdrake.pm_.c:492 +#: ../../printerdrake.pm_.c:595 msgid "" "The following printer was auto-detected. The configuration of the printer " "will work fully automatically. If your printer was not correctly detected or " @@ -7670,7 +7980,7 @@ msgstr "" "自动检测发现了下列打印机, 打印机的配置 会完全自动工作. 如果您的打印机没有被正" "确检测 或者您想定制打印机配置, 选择 \"手工 配置\"." -#: ../../printerdrake.pm_.c:493 +#: ../../printerdrake.pm_.c:596 msgid "" "Here is a list of all auto-detected printers. Please choose the printer you " "want to set up. The configuration of the printer will work fully " @@ -7680,17 +7990,17 @@ msgstr "" "这里列出了所有检测到的打印机. 请选择您希望配置的打印机. 如果您的打印机没有被" "正确检测 或者您想定制打印机配置, 选择 \"手工 配置\"." -#: ../../printerdrake.pm_.c:495 +#: ../../printerdrake.pm_.c:598 msgid "" "Please choose the port where your printer is connected to or enter a device " "name/file name in the input line" msgstr "请选择您打印机使用的端口或输入栏内填入一合法设备或文件" -#: ../../printerdrake.pm_.c:496 +#: ../../printerdrake.pm_.c:599 msgid "Please choose the port where your printer is connected to." msgstr "请问您的打印机是连接到那个端口?" -#: ../../printerdrake.pm_.c:498 +#: ../../printerdrake.pm_.c:601 msgid "" " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " "1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." @@ -7698,19 +8008,19 @@ msgstr "" " (并行口: /dev/lp0, /dev/lp1, ..., 相当于 LPT1:, LPT2:, ..., 第一个 USB 设备" "口: /dev/usb/lp0, 第二个 USB 设备口: /dev/usb/lp1, ...)." -#: ../../printerdrake.pm_.c:503 +#: ../../printerdrake.pm_.c:606 msgid "You must choose/enter a printer/device!" msgstr "您需要配置一台打印机设备" -#: ../../printerdrake.pm_.c:523 +#: ../../printerdrake.pm_.c:626 msgid "Manual configuration" msgstr "手工配置" -#: ../../printerdrake.pm_.c:577 +#: ../../printerdrake.pm_.c:680 msgid "Remote lpd Printer Options" msgstr "远端 lpd 打印机选项" -#: ../../printerdrake.pm_.c:578 +#: ../../printerdrake.pm_.c:681 msgid "" "To use a remote lpd printer, you need to supply the hostname of the printer " "server and the printer name on that server." @@ -7718,46 +8028,46 @@ msgstr "" "要使用一个远端的 lpd 打印队列, 您需要指定打印服务器的\n" "主机名和打印任务要送往的打印队列的名字." -#: ../../printerdrake.pm_.c:579 +#: ../../printerdrake.pm_.c:682 msgid "Remote host name" msgstr "远端主机名" -#: ../../printerdrake.pm_.c:580 +#: ../../printerdrake.pm_.c:683 msgid "Remote printer name" msgstr "远程打印机名" -#: ../../printerdrake.pm_.c:583 +#: ../../printerdrake.pm_.c:686 msgid "Remote host name missing!" msgstr "未找到远端主机!" -#: ../../printerdrake.pm_.c:587 +#: ../../printerdrake.pm_.c:690 msgid "Remote printer name missing!" msgstr "没有找到远端打印机!" -#: ../../printerdrake.pm_.c:609 ../../printerdrake.pm_.c:1119 +#: ../../printerdrake.pm_.c:712 ../../printerdrake.pm_.c:1225 #, c-format msgid "Detected model: %s %s" msgstr "检测到型号: %s %s" -#: ../../printerdrake.pm_.c:683 ../../printerdrake.pm_.c:923 +#: ../../printerdrake.pm_.c:790 ../../printerdrake.pm_.c:1030 msgid "Scanning network..." msgstr "正在扫描网络..." -#: ../../printerdrake.pm_.c:692 ../../printerdrake.pm_.c:713 +#: ../../printerdrake.pm_.c:799 ../../printerdrake.pm_.c:820 #, c-format msgid ", printer \"%s\" on server \"%s\"" msgstr ", 打印机 \"%s\"在服务器 \"%s\"上" -#: ../../printerdrake.pm_.c:695 ../../printerdrake.pm_.c:716 +#: ../../printerdrake.pm_.c:802 ../../printerdrake.pm_.c:823 #, c-format msgid "Printer \"%s\" on server \"%s\"" msgstr "打印机 \"%s\"在服务器 \"%s\"上" -#: ../../printerdrake.pm_.c:736 +#: ../../printerdrake.pm_.c:843 msgid "SMB (Windows 9x/NT) Printer Options" msgstr "SMB (Windows 9x/NT) 打印机选项" -#: ../../printerdrake.pm_.c:737 +#: ../../printerdrake.pm_.c:844 msgid "" "To print to a SMB printer, you need to provide the SMB host name (Note! It " "may be different from its TCP/IP hostname!) and possibly the IP address of " @@ -7769,7 +8079,7 @@ msgstr "" "邻居里看到的主机名, 可能与它的 TCP/IP 主机名不同,), 可能还需要它的 IP 地址,\n" "以及有权访问打印机的用户名, 工作组和口令, 当然还有打印机的共享名. " -#: ../../printerdrake.pm_.c:738 +#: ../../printerdrake.pm_.c:845 msgid "" " If the desired printer was auto-detected, simply choose it from the list " "and then add user name, password, and/or workgroup if needed." @@ -7777,39 +8087,39 @@ msgstr "" "如果自动检测发现了想要的打印机, 只要从列表中选择它, 然后添加用户名, 口令, 以" "及可能需要的网络组名." -#: ../../printerdrake.pm_.c:739 +#: ../../printerdrake.pm_.c:846 msgid "SMB server host" msgstr "SMB 服务器主机" -#: ../../printerdrake.pm_.c:740 +#: ../../printerdrake.pm_.c:847 msgid "SMB server IP" msgstr "SMB 服务器 IP" -#: ../../printerdrake.pm_.c:741 +#: ../../printerdrake.pm_.c:848 msgid "Share name" msgstr "共享名" -#: ../../printerdrake.pm_.c:744 +#: ../../printerdrake.pm_.c:851 msgid "Workgroup" msgstr "工作组" -#: ../../printerdrake.pm_.c:746 +#: ../../printerdrake.pm_.c:853 msgid "Auto-detected" msgstr "自动检测到" -#: ../../printerdrake.pm_.c:757 +#: ../../printerdrake.pm_.c:864 msgid "Either the server name or the server's IP must be given!" msgstr "输入服务器名或服务器的IP" -#: ../../printerdrake.pm_.c:761 +#: ../../printerdrake.pm_.c:868 msgid "Samba share name missing!" msgstr "缺少 Samba 共享名!" -#: ../../printerdrake.pm_.c:767 +#: ../../printerdrake.pm_.c:874 msgid "SECURITY WARNING!" msgstr "安全警告!" -#: ../../printerdrake.pm_.c:768 +#: ../../printerdrake.pm_.c:875 #, c-format msgid "" "You are about to set up printing to a Windows account with password. Due to " @@ -7846,7 +8156,7 @@ msgstr "" "灵按照 \"%s\" 连接方式 配置打印机.\n" "\n" -#: ../../printerdrake.pm_.c:778 +#: ../../printerdrake.pm_.c:885 #, c-format msgid "" "Set up your Windows server to make the printer available under the IPP " @@ -7858,7 +8168,7 @@ msgstr "" "灵按照 \"%s\" 连接方式 配置打印机.\n" "\n" -#: ../../printerdrake.pm_.c:781 +#: ../../printerdrake.pm_.c:888 msgid "" "Connect your printer to a Linux server and let your Windows machine(s) " "connect to it as a client.\n" @@ -7869,11 +8179,11 @@ msgstr "" "\n" "您坚持要继续这样配置打印机吗?" -#: ../../printerdrake.pm_.c:853 +#: ../../printerdrake.pm_.c:960 msgid "NetWare Printer Options" msgstr "NetWare 打印机选项" -#: ../../printerdrake.pm_.c:854 +#: ../../printerdrake.pm_.c:961 msgid "" "To print on a NetWare printer, you need to provide the NetWare print server " "name (Note! it may be different from its TCP/IP hostname!) as well as the " @@ -7884,37 +8194,37 @@ msgstr "" "可能与它的 TCP/IP 主机名不同), 以及有权访问打印机的用户名和口令, \n" "当然还有打印机的打印队列名. " -#: ../../printerdrake.pm_.c:855 +#: ../../printerdrake.pm_.c:962 msgid "Printer Server" msgstr "打印服务器" -#: ../../printerdrake.pm_.c:856 +#: ../../printerdrake.pm_.c:963 msgid "Print Queue Name" msgstr "打印队列名" -#: ../../printerdrake.pm_.c:861 +#: ../../printerdrake.pm_.c:968 msgid "NCP server name missing!" msgstr "NCP 服务器未找到" -#: ../../printerdrake.pm_.c:865 +#: ../../printerdrake.pm_.c:972 msgid "NCP queue name missing!" msgstr "NCP 队列名未找到" -#: ../../printerdrake.pm_.c:932 ../../printerdrake.pm_.c:952 +#: ../../printerdrake.pm_.c:1039 ../../printerdrake.pm_.c:1059 #, c-format msgid ", host \"%s\", port %s" msgstr ", 主机 \"%s\", 端口 %s" -#: ../../printerdrake.pm_.c:935 ../../printerdrake.pm_.c:955 +#: ../../printerdrake.pm_.c:1042 ../../printerdrake.pm_.c:1062 #, c-format msgid "Host \"%s\", port %s" msgstr "主机 \"%s\", 端口 %s" -#: ../../printerdrake.pm_.c:975 +#: ../../printerdrake.pm_.c:1082 msgid "TCP/Socket Printer Options" msgstr "TCP/Socket 打印机选项" -#: ../../printerdrake.pm_.c:977 +#: ../../printerdrake.pm_.c:1084 msgid "" "Choose one of the auto-detected printers from the list or enter the hostname " "or IP and the optional port number (default is 9100) into the input fields." @@ -7922,7 +8232,7 @@ msgstr "" "从自动检测到的打印机列表中选择一个, 或者在输入字段中输入主机名或 IP, 以及可选" "的端口号 (缺省是 9100)." -#: ../../printerdrake.pm_.c:978 +#: ../../printerdrake.pm_.c:1085 msgid "" "To print to a TCP or socket printer, you need to provide the host name or IP " "of the printer and optionally the port number (default is 9100). On HP " @@ -7933,19 +8243,19 @@ msgstr "" "(缺省是 9100). HP JetDirect 打印服务器通常用端口9100, 其它服务器可能用其它的" "端口. 请查阅您的硬件手册." -#: ../../printerdrake.pm_.c:983 +#: ../../printerdrake.pm_.c:1090 msgid "Printer host name or IP missing!" msgstr "缺少打印机主机名或 IP 地址!" -#: ../../printerdrake.pm_.c:1005 +#: ../../printerdrake.pm_.c:1112 msgid "Printer host name or IP" msgstr "打印机主机名或 IP 地址" -#: ../../printerdrake.pm_.c:1054 ../../printerdrake.pm_.c:1056 +#: ../../printerdrake.pm_.c:1160 ../../printerdrake.pm_.c:1162 msgid "Printer Device URI" msgstr "打印机设备 URI" -#: ../../printerdrake.pm_.c:1055 +#: ../../printerdrake.pm_.c:1161 msgid "" "You can specify directly the URI to access the printer. The URI must fulfill " "either the CUPS or the Foomatic specifications. Note that not all URI types " @@ -7954,11 +8264,11 @@ msgstr "" "你可以直接使用 URI 访问打印机. URI 必须符合CUPS 或 Foomatic 规定.但注意不是所" "有的打印队列 (spooler) 都支持 URI." -#: ../../printerdrake.pm_.c:1070 +#: ../../printerdrake.pm_.c:1176 msgid "A valid URI must be entered!" msgstr "必须是有效的URI!" -#: ../../printerdrake.pm_.c:1402 +#: ../../printerdrake.pm_.c:1515 msgid "" "Every printer needs a name (for example \"printer\"). The Description and " "Location fields do not need to be filled in. They are comments for the users." @@ -7966,27 +8276,27 @@ msgstr "" "每台打印机需要一个名字(如 \"printer\").\n" "打印机描述和位置是可选项." -#: ../../printerdrake.pm_.c:1403 +#: ../../printerdrake.pm_.c:1516 msgid "Name of printer" msgstr "打印机名字" -#: ../../printerdrake.pm_.c:1405 +#: ../../printerdrake.pm_.c:1518 msgid "Location" msgstr "位置" -#: ../../printerdrake.pm_.c:1416 ../../printerdrake.pm_.c:1536 +#: ../../printerdrake.pm_.c:1530 ../../printerdrake.pm_.c:1652 msgid "Reading printer database..." msgstr "读取打印机数据库..." -#: ../../printerdrake.pm_.c:1419 +#: ../../printerdrake.pm_.c:1534 msgid "Preparing printer database..." msgstr "准备打印机数据..." -#: ../../printerdrake.pm_.c:1516 +#: ../../printerdrake.pm_.c:1631 msgid "Your printer model" msgstr "您的打印机型号" -#: ../../printerdrake.pm_.c:1517 +#: ../../printerdrake.pm_.c:1632 #, c-format msgid "" "Printerdrake has compared the model name resulting from the printer auto-" @@ -8009,24 +8319,24 @@ msgstr "" "\n" "%s" -#: ../../printerdrake.pm_.c:1522 ../../printerdrake.pm_.c:1525 +#: ../../printerdrake.pm_.c:1637 ../../printerdrake.pm_.c:1640 msgid "The model is correct" msgstr "型号正确" -#: ../../printerdrake.pm_.c:1523 ../../printerdrake.pm_.c:1524 -#: ../../printerdrake.pm_.c:1527 +#: ../../printerdrake.pm_.c:1638 ../../printerdrake.pm_.c:1639 +#: ../../printerdrake.pm_.c:1642 msgid "Select model manually" msgstr "手工选择型号" -#: ../../printerdrake.pm_.c:1543 +#: ../../printerdrake.pm_.c:1659 msgid "Printer model selection" msgstr "打印机型号选择" -#: ../../printerdrake.pm_.c:1544 +#: ../../printerdrake.pm_.c:1660 msgid "Which printer model do you have?" msgstr "请问您打印机的型号 ?" -#: ../../printerdrake.pm_.c:1545 +#: ../../printerdrake.pm_.c:1661 msgid "" "\n" "\n" @@ -8039,17 +8349,17 @@ msgstr "" "检查自动检测选择的型号是否正确. 用光标指定不正确的型号或\"未知打印机\", 然后" "从列表中选择正确的型号." -#: ../../printerdrake.pm_.c:1548 +#: ../../printerdrake.pm_.c:1664 msgid "" "If your printer is not listed, choose a compatible (see printer manual) or a " "similar one." msgstr "然后您的打印机不在列表中, 选择兼容的(参考打印机手册) 或类似的型号." -#: ../../printerdrake.pm_.c:1624 +#: ../../printerdrake.pm_.c:1741 msgid "OKI winprinter configuration" msgstr "OKI winprinter 打印机配置" -#: ../../printerdrake.pm_.c:1625 +#: ../../printerdrake.pm_.c:1742 msgid "" "You are configuring an OKI laser winprinter. These printers\n" "use a very special communication protocol and therefore they work only when " @@ -8059,34 +8369,79 @@ msgid "" "not work. Your connection type setting will be ignored by the driver." msgstr "你正在配置OKI win打印机, 因其使用特别的通讯协议, 只能连在第一个打印口." -#: ../../printerdrake.pm_.c:1668 ../../printerdrake.pm_.c:1695 +#: ../../printerdrake.pm_.c:1785 ../../printerdrake.pm_.c:1812 msgid "Lexmark inkjet configuration" msgstr "利盟(Lexmark)喷墨打印机设定" -#: ../../printerdrake.pm_.c:1669 +#: ../../printerdrake.pm_.c:1786 msgid "" "The inkjet printer drivers provided by Lexmark only support local printers, " "no printers on remote machines or print server boxes. Please connect your " "printer to a local port or configure it on the machine where it is connected " "to." -msgstr "利盟喷墨打印机仅仅支持本地打印." +msgstr "" +"利盟提供的喷墨打印机驱动程序仅仅支持本地打印机, 而非远程主机或打印服务盒上的" +"打印机.请把打印机连接到您的本机端口, 或者在连接了打印机的电脑上进行配置." -#: ../../printerdrake.pm_.c:1696 +#: ../../printerdrake.pm_.c:1813 msgid "" "To be able to print with your Lexmark inkjet and this configuration, you " "need the inkjet printer drivers provided by Lexmark (http://www.lexmark." -"com/). Go to the US site and click on the \"Drivers\" button. Then choose " -"your model and afterwards \"Linux\" as operating system. The drivers come as " -"RPM packages or shell scripts with interactive graphical installation. You " -"do not need to do this configuration by the graphical frontends. Cancel " -"directly after the license agreement. Then print printhead alignment pages " -"with \"lexmarkmaintain\" and adjust the head alignment settings with this " -"program." -msgstr "" -"配置利盟喷墨打印机需要从利盟网站(http://www.lexmark.com/)\n" -"下载\"Linux\"驱动." - -#: ../../printerdrake.pm_.c:1912 +"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " +"\"Linux\" as operating system. The drivers come as RPM packages or shell " +"scripts with interactive graphical installation. You do not need to do this " +"configuration by the graphical frontends. Cancel directly after the license " +"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " +"adjust the head alignment settings with this program." +msgstr "" +"要配置利盟喷墨打印机需要从利盟网站(http://www.lexmark.com/)\n" +"下载喷墨打印机驱动程序. 点击 \"Drivers\" 链接. 然后挑选您的型号 并选择\"Linux" +"\"操作系统. 驱动程序的形式有 RPM 包或带有互动式图形界面的脚本程序. 如果您使用" +"这个配置工具, 就不必使用图形界面的安装程序. 在许可协议之后直接按 Cancel. 用 " +"\"lexmarkmaintain\" 命令打印喷头对齐测试页, 然后用这个程序调节喷头对齐." + +#: ../../printerdrake.pm_.c:1816 +msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format" +msgstr "使用 Zenographics ZJ-Stream 格式的GDI 激光打印机" + +#: ../../printerdrake.pm_.c:1817 +msgid "" +"Your printer belongs to the group of GDI laser printers (winprinters) sold " +"by different manufacturers which uses the Zenographics ZJ-stream raster " +"format for the data sent to the printer. The driver for these printers is " +"still in a very early development stage and so it will perhaps not always " +"work properly. Especially it is possible that the printer only works when " +"you choose the A4 paper size.\n" +"\n" +"Some of these printers, as the HP LaserJet 1000, for which this driver was " +"originally created, need their firmware to be uploaded to them after they " +"are turned on. In the case of the HP LaserJet 1000 you have to search the " +"printer's Windows driver CD or your Windows partition for the file " +"\"sihp1000.img\" and upload the file to the printer with one of the " +"following commands:\n" +"\n" +" lpr -o raw sihp1000.img\n" +" cat sihp1000.img > /dev/usb/lp0\n" +"\n" +"The first command can be given by any normal user, the second must be given " +"as root. After having done so you can print normally.\n" +msgstr "" +"您的打印机属于GDI 激光打印机 (所谓 winprinter), 尽管牌子不同 它们都采用 " +"Zenographics ZJ-stream 光栅格式把数据传输到打印机. 这类打印机的驱动程序仍然处" +"于前期开发阶段, 所以它未必总能正常工作. 特别是打印机可能只有选择 A4 纸张尺寸" +"时才能工作.\n" +"\n" +"有些打印机如 HP LaserJet 1000, 需要在开机之后上载固件. 对 HP LaserJet 1000, " +"您需要在打印机的 Windows 驱动程序光盘或 Windows 磁盘分区上查找 \"sihp1000.img" +"\" 然后使用下列命令之一把这个文件传到打印机:\n" +"\n" +" lpr -o raw sihp1000.img\n" +" cat sihp1000.img > /dev/usb/lp0\n" +"\n" +"任何普通用户都可以使用第一个命令, 第二个命令必须由 root 执行.升级固件之后您就" +"可以正常打印了.\n" + +#: ../../printerdrake.pm_.c:2040 msgid "" "Printer default settings\n" "\n" @@ -8098,22 +8453,22 @@ msgstr "" "打印机缺省设置\n" "如纸张大小、墨水类型等等." -#: ../../printerdrake.pm_.c:1921 +#: ../../printerdrake.pm_.c:2049 #, c-format msgid "Option %s must be an integer number!" msgstr "选项 %s 必须是整数!" -#: ../../printerdrake.pm_.c:1925 +#: ../../printerdrake.pm_.c:2053 #, c-format msgid "Option %s must be a number!" msgstr "选项 %s 必须是数字!" -#: ../../printerdrake.pm_.c:1930 +#: ../../printerdrake.pm_.c:2058 #, c-format msgid "Option %s out of range!" msgstr "选项 %s 超出范围!" -#: ../../printerdrake.pm_.c:1969 +#: ../../printerdrake.pm_.c:2097 #, c-format msgid "" "Do you want to set this printer (\"%s\")\n" @@ -8122,11 +8477,11 @@ msgstr "" "你希望设置这个打印机(\"%s\")\n" "作为缺省打印机吗?" -#: ../../printerdrake.pm_.c:1986 +#: ../../printerdrake.pm_.c:2120 msgid "Test pages" msgstr "测试页" -#: ../../printerdrake.pm_.c:1987 +#: ../../printerdrake.pm_.c:2121 msgid "" "Please select the test pages you want to print.\n" "Note: the photo test page can take a rather long time to get printed and on " @@ -8137,39 +8492,39 @@ msgstr "" "注意: 在某些打印机上打印照片可能要花相当长的时间.\n" "一般请选择标准测试页." -#: ../../printerdrake.pm_.c:1991 +#: ../../printerdrake.pm_.c:2125 msgid "No test pages" msgstr "没有测试页" -#: ../../printerdrake.pm_.c:1992 +#: ../../printerdrake.pm_.c:2126 msgid "Print" msgstr "打印" -#: ../../printerdrake.pm_.c:1994 +#: ../../printerdrake.pm_.c:2183 msgid "Standard test page" msgstr "标准测试页" -#: ../../printerdrake.pm_.c:1997 +#: ../../printerdrake.pm_.c:2186 msgid "Alternative test page (Letter)" msgstr "可换测试页(信纸)" -#: ../../printerdrake.pm_.c:2000 +#: ../../printerdrake.pm_.c:2189 msgid "Alternative test page (A4)" msgstr "替换测试页 (A4)" -#: ../../printerdrake.pm_.c:2002 +#: ../../printerdrake.pm_.c:2191 msgid "Photo test page" msgstr "照片测试页" -#: ../../printerdrake.pm_.c:2006 +#: ../../printerdrake.pm_.c:2195 msgid "Do not print any test page" msgstr "不打印任何测试页" -#: ../../printerdrake.pm_.c:2014 ../../printerdrake.pm_.c:2166 +#: ../../printerdrake.pm_.c:2204 ../../printerdrake.pm_.c:2357 msgid "Printing test page(s)..." msgstr "正在打印测试页..." -#: ../../printerdrake.pm_.c:2039 +#: ../../printerdrake.pm_.c:2229 #, c-format msgid "" "Test page(s) have been sent to the printer.\n" @@ -8183,21 +8538,21 @@ msgstr "" "%s\n" "\n" -#: ../../printerdrake.pm_.c:2043 +#: ../../printerdrake.pm_.c:2233 msgid "" "Test page(s) have been sent to the printer.\n" "It may take some time before the printer starts.\n" msgstr "测试页已经发送到打印机后台程序. 过一少段时间打印机将开始工作.\n" -#: ../../printerdrake.pm_.c:2050 +#: ../../printerdrake.pm_.c:2240 msgid "Did it work properly?" msgstr "工作正常?" -#: ../../printerdrake.pm_.c:2072 ../../printerdrake.pm_.c:3191 +#: ../../printerdrake.pm_.c:2262 ../../printerdrake.pm_.c:3416 msgid "Raw printer" msgstr "裸打印机" -#: ../../printerdrake.pm_.c:2098 +#: ../../printerdrake.pm_.c:2288 #, c-format msgid "" "To print a file from the command line (terminal window) you can either use " @@ -8208,7 +8563,7 @@ msgstr "" "要从命令行打印文件可使用命令\"%s <文件>\" 或图形打印工具: \"xpp <文件>\" 或 " "\"kprinter <文件>\". 图形工具让您比较容易的选择打印机和修改打印选项.\n" -#: ../../printerdrake.pm_.c:2100 +#: ../../printerdrake.pm_.c:2290 msgid "" "These commands you can also use in the \"Printing command\" field of the " "printing dialogs of many applications, but here do not supply the file name " @@ -8217,8 +8572,8 @@ msgstr "" "该命令你可用在许多应用的打印对话框的\"打印命令\"中,因为应用程序会提供要打印的" "文件, 所以那里不用写文件名.\n" -#: ../../printerdrake.pm_.c:2103 ../../printerdrake.pm_.c:2120 -#: ../../printerdrake.pm_.c:2130 +#: ../../printerdrake.pm_.c:2293 ../../printerdrake.pm_.c:2310 +#: ../../printerdrake.pm_.c:2320 #, c-format msgid "" "\n" @@ -8229,7 +8584,7 @@ msgstr "" "\n" "\"%s\"命令也可用来修改打印作业的选项, 例如: \"%s \". " -#: ../../printerdrake.pm_.c:2106 ../../printerdrake.pm_.c:2146 +#: ../../printerdrake.pm_.c:2296 ../../printerdrake.pm_.c:2336 #, c-format msgid "" "To know about the options available for the current printer read either the " @@ -8239,7 +8594,7 @@ msgstr "" "要了解当前打印机可用的选项, 请看下面的列表, 或者点击\"打印选项列表\".%s%s\n" "\n" -#: ../../printerdrake.pm_.c:2110 +#: ../../printerdrake.pm_.c:2300 msgid "" "Here is a list of the available printing options for the current printer:\n" "\n" @@ -8247,35 +8602,35 @@ msgstr "" "以下是可用于当前打印机的一些打印选项: \n" "\n" -#: ../../printerdrake.pm_.c:2115 ../../printerdrake.pm_.c:2125 +#: ../../printerdrake.pm_.c:2305 ../../printerdrake.pm_.c:2315 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\".\n" msgstr "命令行打印文件使用命令\"%s <文件>\".\n" -#: ../../printerdrake.pm_.c:2117 ../../printerdrake.pm_.c:2127 -#: ../../printerdrake.pm_.c:2137 +#: ../../printerdrake.pm_.c:2307 ../../printerdrake.pm_.c:2317 +#: ../../printerdrake.pm_.c:2327 msgid "" "This command you can also use in the \"Printing command\" field of the " "printing dialogs of many applications. But here do not supply the file name " "because the file to print is provided by the application.\n" msgstr "该命令你可用在许多应用的打印对话框的\"打印命令\"项.\n" -#: ../../printerdrake.pm_.c:2122 ../../printerdrake.pm_.c:2132 +#: ../../printerdrake.pm_.c:2312 ../../printerdrake.pm_.c:2322 msgid "" "To get a list of the options available for the current printer click on the " "\"Print option list\" button." msgstr "点击\"打印选项\"按钮可以列举当前打印机的可用选项." -#: ../../printerdrake.pm_.c:2135 +#: ../../printerdrake.pm_.c:2325 #, c-format msgid "" "To print a file from the command line (terminal window) use the command \"%s " "\" or \"%s \".\n" msgstr "用命令\"%s <文件>\"或\"%s <文件>\"打印文件.\n" -#: ../../printerdrake.pm_.c:2139 +#: ../../printerdrake.pm_.c:2329 msgid "" "You can also use the graphical interface \"xpdq\" for setting options and " "handling printing jobs.\n" @@ -8287,7 +8642,7 @@ msgstr "" "你可以用图形接口\"xpdq\"设置打印选项和处理打印作业.\n" "如果你使用KDE, 桌面上有\"停止打印机!\"按钮用于取消打印作业.\n" -#: ../../printerdrake.pm_.c:2143 +#: ../../printerdrake.pm_.c:2333 #, c-format msgid "" "\n" @@ -8298,40 +8653,40 @@ msgstr "" "\n" "\"%s\"和\"%s\"命令允许修改打印作业的选项, 例如: \"%s \".\n" -#: ../../printerdrake.pm_.c:2153 +#: ../../printerdrake.pm_.c:2343 #, c-format msgid "Printing/Scanning/Photo Cards on \"%s\"" msgstr "在\"%s\"打印机上的打印/扫描/照片卡" -#: ../../printerdrake.pm_.c:2154 +#: ../../printerdrake.pm_.c:2344 #, c-format msgid "Printing/Scanning on \"%s\"" msgstr "在\"%s\"打印机上的打印/扫描" -#: ../../printerdrake.pm_.c:2156 +#: ../../printerdrake.pm_.c:2346 #, c-format msgid "Printing/Photo Card Access on \"%s\"" msgstr "\"%s\"打印机上的打印/照片卡访问" -#: ../../printerdrake.pm_.c:2157 +#: ../../printerdrake.pm_.c:2347 #, c-format msgid "Printing on the printer \"%s\"" msgstr "正在\"%s\"打印机上打印" -#: ../../printerdrake.pm_.c:2160 ../../printerdrake.pm_.c:2163 -#: ../../printerdrake.pm_.c:2164 ../../printerdrake.pm_.c:2165 -#: ../../printerdrake.pm_.c:3175 ../../standalone/drakTermServ_.c:248 -#: ../../standalone/drakbackup_.c:1485 ../../standalone/drakbackup_.c:3530 -#: ../../standalone/drakbug_.c:129 ../../standalone/drakfont_.c:705 +#: ../../printerdrake.pm_.c:2350 ../../printerdrake.pm_.c:2353 +#: ../../printerdrake.pm_.c:2354 ../../printerdrake.pm_.c:2355 +#: ../../printerdrake.pm_.c:3400 ../../standalone/drakTermServ_.c:248 +#: ../../standalone/drakbackup_.c:1560 ../../standalone/drakbackup_.c:4208 +#: ../../standalone/drakbug_.c:130 ../../standalone/drakfont_.c:705 #: ../../standalone/drakfont_.c:1014 msgid "Close" msgstr "关闭" -#: ../../printerdrake.pm_.c:2163 +#: ../../printerdrake.pm_.c:2353 msgid "Print option list" msgstr "打印机选项" -#: ../../printerdrake.pm_.c:2182 +#: ../../printerdrake.pm_.c:2373 #, c-format msgid "" "Your multi-function device was configured automatically to be able to scan. " @@ -8351,7 +8706,7 @@ msgstr "" "\n" "不要对这个设备使用 \"scannerdrake扫描仪配置工具\"!" -#: ../../printerdrake.pm_.c:2202 +#: ../../printerdrake.pm_.c:2394 msgid "" "Your printer was configured automatically to give you access to the photo " "card drives from your PC. Now you can access your photo cards using the " @@ -8370,17 +8725,17 @@ msgstr "" "持照片卡的 HP 打印机可以查看后续的盘符. 在 \"MtoolsFM\" 中 您可以在文件列表的" "右上角切换盘符." -#: ../../printerdrake.pm_.c:2223 ../../printerdrake.pm_.c:2673 -#: ../../printerdrake.pm_.c:2945 +#: ../../printerdrake.pm_.c:2416 ../../printerdrake.pm_.c:2875 +#: ../../printerdrake.pm_.c:3170 msgid "Reading printer data..." msgstr "读取打印机数据..." -#: ../../printerdrake.pm_.c:2243 ../../printerdrake.pm_.c:2271 -#: ../../printerdrake.pm_.c:2306 +#: ../../printerdrake.pm_.c:2436 ../../printerdrake.pm_.c:2464 +#: ../../printerdrake.pm_.c:2499 msgid "Transfer printer configuration" -msgstr "传送打印机配置" +msgstr "迁移打印机配置" -#: ../../printerdrake.pm_.c:2244 +#: ../../printerdrake.pm_.c:2437 #, c-format msgid "" "You can copy the printer configuration which you have done for the spooler %" @@ -8389,61 +8744,61 @@ msgid "" "overtaken, but jobs will not be transferred.\n" "Not all queues can be transferred due to the following reasons:\n" msgstr "" -"你可以复制做好的打印机配置从 %s 到当前的 %s .\n" -"所有配置数据将被覆盖，打印作业不会传送.\n" -"由于以下原因某些打印作业不会被传送:\n" +"你可以把做好的打印机配置从队列 %s 复制到 %s, 您当前的队列.\n" +"所有配置数据将被覆盖，但是打印作业不会迁移.\n" +"由于以下原因, 某些打印队列无法迁移:\n" -#: ../../printerdrake.pm_.c:2247 +#: ../../printerdrake.pm_.c:2440 msgid "" "CUPS does not support printers on Novell servers or printers sending the " "data into a free-formed command.\n" msgstr "CUPS不支持Novell服务器上的打印机及发送数据到无格式命令的打印机.\n" -#: ../../printerdrake.pm_.c:2249 +#: ../../printerdrake.pm_.c:2442 msgid "" "PDQ only supports local printers, remote LPD printers, and Socket/TCP " "printers.\n" -msgstr "PDQ只支持本地打印机,远程LPD打印机, 和 Socket/TCP 打印机.\n" +msgstr "PDQ只支持本地打印机, 远程LPD打印机, 和 Socket/TCP 打印机.\n" -#: ../../printerdrake.pm_.c:2251 +#: ../../printerdrake.pm_.c:2444 msgid "LPD and LPRng do not support IPP printers.\n" msgstr "LPD 和 LPRng不支持IPP打印机.\n" -#: ../../printerdrake.pm_.c:2253 +#: ../../printerdrake.pm_.c:2446 msgid "" "In addition, queues not created with this program or \"foomatic-configure\" " "cannot be transferred." msgstr "" -"该程序没有建立队列或\n" -"\"foomatic 配置\"无法传送" +"另外, 如果队列不是由这个程序或者 \"foomatic-configure\" 所创建, 就无法迁移." -#: ../../printerdrake.pm_.c:2254 +#: ../../printerdrake.pm_.c:2447 msgid "" "\n" "Also printers configured with the PPD files provided by their manufacturers " "or with native CUPS drivers cannot be transferred." msgstr "" "\n" -"打印机产商提供的 PPD 或打印机的 CUPS 驱动程序无法传送." +"而且, 如果打印机需要使用厂商提供的 PPD文件配置, 或打印机带有内置的 CUPS 驱动" +"程序, 它将无法迁移." -#: ../../printerdrake.pm_.c:2255 +#: ../../printerdrake.pm_.c:2448 msgid "" "\n" "Mark the printers which you want to transfer and click \n" "\"Transfer\"." msgstr "" "\n" -"选择你要传送的打印机并点击\"传送\"." +"标记你要迁移的打印机并点击\"迁移\"." -#: ../../printerdrake.pm_.c:2258 +#: ../../printerdrake.pm_.c:2451 msgid "Do not transfer printers" -msgstr "不传送打印机" +msgstr "不迁移打印机" -#: ../../printerdrake.pm_.c:2259 ../../printerdrake.pm_.c:2276 +#: ../../printerdrake.pm_.c:2452 ../../printerdrake.pm_.c:2469 msgid "Transfer" -msgstr "传送" +msgstr "迁移" -#: ../../printerdrake.pm_.c:2272 +#: ../../printerdrake.pm_.c:2465 #, c-format msgid "" "A printer named \"%s\" already exists under %s. \n" @@ -8451,14 +8806,14 @@ msgid "" "You can also type a new name or skip this printer." msgstr "" "打印机\"%s\"已经在%s存在.\n" -"点击 \"传送\" 覆盖配置.\n" +"点击 \"迁移\" 覆盖配置.\n" "你也可以选择新的名称或略过该打印机." -#: ../../printerdrake.pm_.c:2280 +#: ../../printerdrake.pm_.c:2473 msgid "Name of printer should contain only letters, numbers and the underscore" msgstr "打印机名称可以包含字母, 数字 和 下划线" -#: ../../printerdrake.pm_.c:2285 +#: ../../printerdrake.pm_.c:2478 #, c-format msgid "" "The printer \"%s\" already exists,\n" @@ -8467,47 +8822,47 @@ msgstr "" "打印机 \"%s\"已经存在,\n" "真的覆盖配置?" -#: ../../printerdrake.pm_.c:2293 +#: ../../printerdrake.pm_.c:2486 msgid "New printer name" msgstr "新打印机名称" -#: ../../printerdrake.pm_.c:2296 +#: ../../printerdrake.pm_.c:2489 #, c-format msgid "Transferring %s..." -msgstr "传送 %s ..." +msgstr "迁移 %s ..." -#: ../../printerdrake.pm_.c:2307 +#: ../../printerdrake.pm_.c:2500 #, c-format msgid "" "You have transferred your former default printer (\"%s\"), Should it be also " "the default printer under the new printing system %s?" msgstr "" -"你已经传送以前系统中的缺省打印机(\"%s\"),\n" +"你已经迁移以前系统中的缺省打印机(\"%s\"),\n" "是否设置为新打印系统的缺省打印机 %s?" -#: ../../printerdrake.pm_.c:2316 +#: ../../printerdrake.pm_.c:2510 msgid "Refreshing printer data..." msgstr "刷新打印机数据..." -#: ../../printerdrake.pm_.c:2324 ../../printerdrake.pm_.c:2395 -#: ../../printerdrake.pm_.c:2407 +#: ../../printerdrake.pm_.c:2518 ../../printerdrake.pm_.c:2590 +#: ../../printerdrake.pm_.c:2602 msgid "Configuration of a remote printer" msgstr "配置远程打印机" -#: ../../printerdrake.pm_.c:2325 +#: ../../printerdrake.pm_.c:2519 msgid "Starting network..." msgstr "正在启动网络..." -#: ../../printerdrake.pm_.c:2359 ../../printerdrake.pm_.c:2363 -#: ../../printerdrake.pm_.c:2365 +#: ../../printerdrake.pm_.c:2554 ../../printerdrake.pm_.c:2558 +#: ../../printerdrake.pm_.c:2560 msgid "Configure the network now" msgstr "正在配置网络" -#: ../../printerdrake.pm_.c:2360 +#: ../../printerdrake.pm_.c:2555 msgid "Network functionality not configured" msgstr "尚未完成网络配置" -#: ../../printerdrake.pm_.c:2361 +#: ../../printerdrake.pm_.c:2556 msgid "" "You are going to configure a remote printer. This needs working network " "access, but your network is not configured yet. If you go on without network " @@ -8517,11 +8872,11 @@ msgstr "" "你在配置远程打印机. 配置远程打印需要网络访问,\n" "但你还没有配置网络. 继续吗?" -#: ../../printerdrake.pm_.c:2364 +#: ../../printerdrake.pm_.c:2559 msgid "Go on without configuring the network" msgstr "略过网络配置" -#: ../../printerdrake.pm_.c:2397 +#: ../../printerdrake.pm_.c:2592 msgid "" "The network configuration done during the installation cannot be started " "now. Please check whether the network gets accessable after booting your " @@ -8534,7 +8889,7 @@ msgstr "" "开机后检查网络或用 Mandrake 配置中心修改,节 \"网络和因特网\"/\"连接\", 然后用" "\"硬件\"/\"打印机\"配置打印机" -#: ../../printerdrake.pm_.c:2398 +#: ../../printerdrake.pm_.c:2593 msgid "" "The network access was not running and could not be started. Please check " "your configuration and your hardware. Then try to configure your remote " @@ -8543,24 +8898,24 @@ msgstr "" "网络访问出现错误.\n" "请检查硬件击配置. 然后再配置远程打印." -#: ../../printerdrake.pm_.c:2408 +#: ../../printerdrake.pm_.c:2603 msgid "Restarting printing system..." msgstr "重新启动打印机系统 ..." -#: ../../printerdrake.pm_.c:2446 +#: ../../printerdrake.pm_.c:2641 msgid "high" msgstr "高" -#: ../../printerdrake.pm_.c:2446 +#: ../../printerdrake.pm_.c:2641 msgid "paranoid" msgstr "严格" -#: ../../printerdrake.pm_.c:2447 +#: ../../printerdrake.pm_.c:2642 #, c-format msgid "Installing a printing system in the %s security level" msgstr "在 %s 安全级别上安装打印系统" -#: ../../printerdrake.pm_.c:2448 +#: ../../printerdrake.pm_.c:2643 #, c-format msgid "" "You are about to install the printing system %s on a system running in the %" @@ -8582,11 +8937,11 @@ msgstr "" "\n" "你要配置打印吗?" -#: ../../printerdrake.pm_.c:2480 +#: ../../printerdrake.pm_.c:2675 msgid "Starting the printing system at boot time" msgstr "开机时启动打印系统" -#: ../../printerdrake.pm_.c:2481 +#: ../../printerdrake.pm_.c:2676 #, c-format msgid "" "The printing system (%s) will not be started automatically when the machine " @@ -8603,74 +8958,71 @@ msgstr "" "\n" "你希望让打印系统自动启动吗?" -#: ../../printerdrake.pm_.c:2504 ../../printerdrake.pm_.c:2544 -#: ../../printerdrake.pm_.c:2581 ../../printerdrake.pm_.c:2621 -#: ../../printerdrake.pm_.c:2733 +#: ../../printerdrake.pm_.c:2700 ../../printerdrake.pm_.c:2741 +#: ../../printerdrake.pm_.c:2780 ../../printerdrake.pm_.c:2822 +#: ../../printerdrake.pm_.c:2943 msgid "Checking installed software..." msgstr "检查已经安装的软件..." -#: ../../printerdrake.pm_.c:2548 +#: ../../printerdrake.pm_.c:2746 msgid "Removing LPRng..." msgstr "删除 LPRng..." -#: ../../printerdrake.pm_.c:2585 +#: ../../printerdrake.pm_.c:2785 msgid "Removing LPD..." msgstr "删除 LPD ..." -#: ../../printerdrake.pm_.c:2657 +#: ../../printerdrake.pm_.c:2858 msgid "Select Printer Spooler" msgstr "选择打印机" -#: ../../printerdrake.pm_.c:2658 +#: ../../printerdrake.pm_.c:2859 msgid "Which printing system (spooler) do you want to use?" msgstr "您需要使用哪种打印系统?" -#: ../../printerdrake.pm_.c:2691 +#: ../../printerdrake.pm_.c:2895 #, c-format msgid "Configuring printer \"%s\"..." msgstr "正在设定打印机\"%s\" ..." -#: ../../printerdrake.pm_.c:2704 +#: ../../printerdrake.pm_.c:2909 msgid "Installing Foomatic..." msgstr "正在安装 Foomatic 程序..." -#: ../../printerdrake.pm_.c:2769 ../../printerdrake.pm_.c:2808 -#: ../../printerdrake.pm_.c:3192 ../../printerdrake.pm_.c:3262 +#: ../../printerdrake.pm_.c:2979 ../../printerdrake.pm_.c:3020 +#: ../../printerdrake.pm_.c:3417 ../../printerdrake.pm_.c:3490 msgid "Printer options" msgstr "打印机选项" -#: ../../printerdrake.pm_.c:2778 -msgid "Preparing PrinterDrake..." -msgstr "准备打印机配置向导..." +#: ../../printerdrake.pm_.c:2989 +msgid "Preparing Printerdrake..." +msgstr "准备打印机配置向导Printerdrake..." -#: ../../printerdrake.pm_.c:2795 ../../printerdrake.pm_.c:3349 +#: ../../printerdrake.pm_.c:3007 ../../printerdrake.pm_.c:3580 msgid "Configuring applications..." msgstr "配置应用程序 ..." -#: ../../printerdrake.pm_.c:2815 +#: ../../printerdrake.pm_.c:3027 msgid "Would you like to configure printing?" msgstr "您想要配置打印机吗 ?" -#: ../../printerdrake.pm_.c:2827 +#: ../../printerdrake.pm_.c:3039 msgid "Printing system: " msgstr "打印系统:" -#: ../../printerdrake.pm_.c:2875 -msgid "Printerdrake" -msgstr "打印机配置向导" - -#: ../../printerdrake.pm_.c:2879 +#: ../../printerdrake.pm_.c:3099 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; to view information about it; " "or to make a printer on a remote CUPS server available for Star Office/" -"OpenOffice.org." +"OpenOffice.org/GIMP." msgstr "" "下列打印机已配置.\n" "在打印机名称上双击可以修改它的设置; 把它设置成缺省打印机; 查看它的信息;\n" -"或者让 Star Office/OpenOffice.org 能在远程 CUPS 服务器的打印机上打印文档." +"或者让 Star Office/OpenOffice.org/GIMP 能在远程 CUPS 服务器的打印机上打印文" +"档." -#: ../../printerdrake.pm_.c:2880 +#: ../../printerdrake.pm_.c:3100 msgid "" "The following printers are configured. Double-click on a printer to change " "its settings; to make it the default printer; or to view information about " @@ -8680,28 +9032,28 @@ msgstr "" "点击去修改或读取信息,\n" "点击\"增加打印机\"增加新的打印机." -#: ../../printerdrake.pm_.c:2906 +#: ../../printerdrake.pm_.c:3127 msgid "Refresh printer list (to display all available remote CUPS printers)" msgstr "更新列表 (显示远程 CUPS 打印服务器)" -#: ../../printerdrake.pm_.c:2924 +#: ../../printerdrake.pm_.c:3145 msgid "Change the printing system" msgstr "修改打印系统" -#: ../../printerdrake.pm_.c:2929 ../../standalone/drakconnect_.c:277 +#: ../../printerdrake.pm_.c:3150 ../../standalone/drakconnect_.c:277 msgid "Normal Mode" msgstr "普通模式" -#: ../../printerdrake.pm_.c:3085 ../../printerdrake.pm_.c:3135 -#: ../../printerdrake.pm_.c:3343 +#: ../../printerdrake.pm_.c:3310 ../../printerdrake.pm_.c:3360 +#: ../../printerdrake.pm_.c:3573 msgid "Do you want to configure another printer?" msgstr "您想要配置其他打印机吗 ?" -#: ../../printerdrake.pm_.c:3170 +#: ../../printerdrake.pm_.c:3395 msgid "Modify printer configuration" msgstr "修改打印机配置" -#: ../../printerdrake.pm_.c:3172 +#: ../../printerdrake.pm_.c:3397 #, c-format msgid "" "Printer %s\n" @@ -8710,100 +9062,102 @@ msgstr "" "打印机 %s\n" "要修改吗?" -#: ../../printerdrake.pm_.c:3176 +#: ../../printerdrake.pm_.c:3401 msgid "Do it!" msgstr "执行!" -#: ../../printerdrake.pm_.c:3181 ../../printerdrake.pm_.c:3236 +#: ../../printerdrake.pm_.c:3406 ../../printerdrake.pm_.c:3461 msgid "Printer connection type" msgstr "打印机连接类型" -#: ../../printerdrake.pm_.c:3182 ../../printerdrake.pm_.c:3240 +#: ../../printerdrake.pm_.c:3407 ../../printerdrake.pm_.c:3465 msgid "Printer name, description, location" msgstr "打印机名称, 描述, 位置" -#: ../../printerdrake.pm_.c:3184 ../../printerdrake.pm_.c:3255 +#: ../../printerdrake.pm_.c:3409 ../../printerdrake.pm_.c:3483 msgid "Printer manufacturer, model, driver" msgstr "打印机厂家, 型号, 驱动" -#: ../../printerdrake.pm_.c:3185 ../../printerdrake.pm_.c:3256 +#: ../../printerdrake.pm_.c:3410 ../../printerdrake.pm_.c:3484 msgid "Printer manufacturer, model" msgstr "打印机厂家, 型号" -#: ../../printerdrake.pm_.c:3194 ../../printerdrake.pm_.c:3266 +#: ../../printerdrake.pm_.c:3419 ../../printerdrake.pm_.c:3494 msgid "Set this printer as the default" msgstr "设置该打印机为却省" -#: ../../printerdrake.pm_.c:3196 ../../printerdrake.pm_.c:3271 -msgid "Add this printer to Star Office/OpenOffice.org" -msgstr "把这个打印机添加到Star Office/OpenOffice.org" +#: ../../printerdrake.pm_.c:3421 ../../printerdrake.pm_.c:3499 +msgid "Add this printer to Star Office/OpenOffice.org/GIMP" +msgstr "把这个打印机添加到Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3197 ../../printerdrake.pm_.c:3280 -msgid "Remove this printer from Star Office/OpenOffice.org" -msgstr "从Star Office/OpenOffice.org删除这个打印机" +#: ../../printerdrake.pm_.c:3422 ../../printerdrake.pm_.c:3508 +msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" +msgstr "从Star Office/OpenOffice.org/GIMP删除这个打印机" -#: ../../printerdrake.pm_.c:3198 ../../printerdrake.pm_.c:3289 +#: ../../printerdrake.pm_.c:3423 ../../printerdrake.pm_.c:3517 msgid "Print test pages" msgstr "打印测试页" -#: ../../printerdrake.pm_.c:3199 ../../printerdrake.pm_.c:3291 +#: ../../printerdrake.pm_.c:3424 ../../printerdrake.pm_.c:3519 msgid "Know how to use this printer" msgstr "知道怎样使用此打印机" -#: ../../printerdrake.pm_.c:3201 ../../printerdrake.pm_.c:3293 +#: ../../printerdrake.pm_.c:3426 ../../printerdrake.pm_.c:3521 msgid "Remove printer" msgstr "删除打印机" -#: ../../printerdrake.pm_.c:3245 +#: ../../printerdrake.pm_.c:3472 #, c-format msgid "Removing old printer \"%s\"..." msgstr "删除旧打印机\"%s\" ..." -#: ../../printerdrake.pm_.c:3269 +#: ../../printerdrake.pm_.c:3497 msgid "Default printer" msgstr "缺省打印机" -#: ../../printerdrake.pm_.c:3270 +#: ../../printerdrake.pm_.c:3498 #, c-format msgid "The printer \"%s\" is set as the default printer now." msgstr "打印机 \"%s\" 设为却省打印机." -#: ../../printerdrake.pm_.c:3274 ../../printerdrake.pm_.c:3277 -msgid "Adding printer to Star Office/OpenOffice.org" -msgstr "添加打印机到Star Office/OpenOffice.org" +#: ../../printerdrake.pm_.c:3502 ../../printerdrake.pm_.c:3505 +msgid "Adding printer to Star Office/OpenOffice.org/GIMP" +msgstr "添加打印机到Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3275 +#: ../../printerdrake.pm_.c:3503 #, c-format msgid "" -"The printer \"%s\" was successfully added to Star Office/OpenOffice.org." -msgstr "打印机\"%s\"成功添加到Star Office/OpenOffice.org" +"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." +msgstr "打印机\"%s\"成功添加到Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3278 +#: ../../printerdrake.pm_.c:3506 #, c-format -msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org." -msgstr "未能添加打印机 \"%s\" 到Star Office/OpenOffice.org" +msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." +msgstr "未能添加打印机 \"%s\" 到Star Office/OpenOffice.org/GIMP" -#: ../../printerdrake.pm_.c:3283 ../../printerdrake.pm_.c:3286 -msgid "Removing printer from Star Office/OpenOffice.org" -msgstr "从 Star Office/OpenOffice.org 删除打印机" +#: ../../printerdrake.pm_.c:3511 ../../printerdrake.pm_.c:3514 +msgid "Removing printer from Star Office/OpenOffice.org/GIMP" +msgstr "从 Star Office/OpenOffice.org/GIMP 删除打印机" -#: ../../printerdrake.pm_.c:3284 +#: ../../printerdrake.pm_.c:3512 #, c-format msgid "" -"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org." -msgstr "成功的从 Star Office/OpenOffice.org 删除打印机 \"%s\"." +"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" +"GIMP." +msgstr "成功的从 Star Office/OpenOffice.org/GIMP 删除打印机 \"%s\"." -#: ../../printerdrake.pm_.c:3287 +#: ../../printerdrake.pm_.c:3515 #, c-format -msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org." -msgstr "未能从 Star Office/OpenOffice.org 删除打印机 \"%s\"." +msgid "" +"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." +msgstr "未能从 Star Office/OpenOffice.org/GIMP 删除打印机 \"%s\"." -#: ../../printerdrake.pm_.c:3295 +#: ../../printerdrake.pm_.c:3523 #, c-format msgid "Do you really want to remove the printer \"%s\"?" msgstr "真的要删除打印机\"%s\"?" -#: ../../printerdrake.pm_.c:3297 +#: ../../printerdrake.pm_.c:3527 #, c-format msgid "Removing printer \"%s\"..." msgstr "正在删除打印机\"%s\" ..." @@ -8959,9 +9313,7 @@ msgstr "" #: ../../services.pm_.c:28 msgid "" "Apache is a World Wide Web server. It is used to serve HTML files and CGI." -msgstr "" -"Apache 是一个 WWW 万维网服务器. 它提供 HTML 文件\n" -"和 CGI 等服务." +msgstr "Apache 是一个 WWW 万维网服务器. 它提供 HTML 文件和 CGI 等服务." #: ../../services.pm_.c:29 msgid "" @@ -8972,7 +9324,7 @@ msgid "" "disables\n" "all of the services it is responsible for." msgstr "" -"互联网超级后台服务器 (常称作 inetd) 在需要时启动很多其他的互联网服务.\n" +"超级互联网后台服务器 (常称作 inetd) 在需要时启动各种其他的互联网服务.\n" "它负责响应多种服务, 包括 telnet, ftp, rsh, 和 rlogin.\n" "禁止 inetd 就同时禁止了它负责的所有服务." @@ -9184,7 +9536,7 @@ msgstr " msgid "File sharing" msgstr "文件共享" -#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1669 +#: ../../services.pm_.c:128 ../../standalone/drakbackup_.c:1744 msgid "System" msgstr "系统" @@ -9235,204 +9587,239 @@ msgstr " msgid "Stop" msgstr "停止" -#: ../../share/advertising/00-thanks.pl_.c:9 -msgid "Thank you for choosing Mandrake Linux 8.2" -msgstr "感谢您选择 Mandrake Linux" +#: ../../share/advertising/01-thanks.pl_.c:9 +msgid "Thank you for choosing Mandrake Linux 9.0" +msgstr "感谢您选择 Mandrake Linux 9.0" -#: ../../share/advertising/00-thanks.pl_.c:10 +#: ../../share/advertising/01-thanks.pl_.c:10 msgid "Welcome to the Open Source world" -msgstr "欢迎进入开放源码世界" +msgstr "欢迎进入开放源代码世界" -#: ../../share/advertising/00-thanks.pl_.c:11 +#: ../../share/advertising/01-thanks.pl_.c:11 msgid "" "The success of MandrakeSoft is based upon the principle of Free Software. " "Your new operating system is the result of collaborative work on the part of " "the worldwide Linux Community" msgstr "" -"MandrakeSoft 的成功植根于自由软件的原则. 您所使用的新操作系统是全世界 Linux " -"爱好者合作的成果" +"MandrakeSoft 的成功植根于自由软件的原则. 您的新操作系统是全世界 Linux 社团合" +"作的成果" -#: ../../share/advertising/01-gnu.pl_.c:9 -msgid "Join the Free Software world" +#: ../../share/advertising/02-community.pl_.c:9 +msgid "Get involved in the Free Software world" msgstr "加入自由软件的世界" -#: ../../share/advertising/01-gnu.pl_.c:10 +#: ../../share/advertising/02-community.pl_.c:10 +msgid "Want to know more about the Open Source community?" +msgstr "想更多了解开放源代码社团?" + +#: ../../share/advertising/02-community.pl_.c:11 msgid "" -"Get to know the Open Source community and become a member. Learn, teach, and " -"help others by joining the many discussion forums that you will find in our " -"\"Community\" webpages" +"To share your own knowledge and help build Linux tools, join the discussions " +"forum you'll find on our \"Community\" webpages" msgstr "" -"来了解开放源码, 并成为社区的一员. 从我们的\"社区\"网页开始, 加入众多的讨论区" -"和其他人一起, 互相学习, 互相帮助" +"想与别人分享您的知识, 并帮助创造更好的 Linux 工具吗? 请加入我们的\"社团\"网页" +"的讨论区" -#: ../../share/advertising/02-internet.pl_.c:9 -msgid "Internet and Messaging" -msgstr "互联网和通信" +#: ../../share/advertising/03-internet.pl_.c:9 +msgid "Get the most from the Internet" +msgstr "充分利用互联网资源" -#: ../../share/advertising/02-internet.pl_.c:10 +#: ../../share/advertising/03-internet.pl_.c:10 msgid "" -"Mandrake Linux 8.2 provides the best software to access everything the " -"Internet has to offer: Surf the web & view animations with Mozilla and " -"Konqueror, exchange email & organize your personal information with " -"Evolution and Kmail, and much more" +"Mandrake Linux 9.0 has selected the best software for you. Surf the Web and " +"view animations with Mozilla and Konqueror, or read your mail and handle " +"your personal information with Evolution and Kmail" msgstr "" -"Mandrake Linux 提供了最好的软件来访问互联网上提供的各种好东西: Mozilla 和 " -"Konquerro 帮您网上冲浪, Evolution 和 Kmail 帮您收发电子邮件并整理您的个人信" -"息, 还有更多等您来尝试" +"Mandrake Linux 9.0 为您挑选了最好的软件. Mozilla 和 Konquerro 帮您网上冲浪和" +"欣赏动画, Evolution 和 Kmail 帮您收发电子邮件并整理您的个人信息" -#: ../../share/advertising/03-graphic.pl_.c:9 -msgid "Multimedia and Graphics" -msgstr "多媒体和图形" +#: ../../share/advertising/04-multimedia.pl_.c:9 +msgid "Discover the most up-to-date graphics and multimedia tools!" +msgstr "尝试最新的图象和多媒体工具!" -#: ../../share/advertising/03-graphic.pl_.c:10 +#: ../../share/advertising/04-multimedia.pl_.c:10 +msgid "Push multimedia to its limits!" +msgstr "把多媒体推向极致!" + +#: ../../share/advertising/04-multimedia.pl_.c:11 msgid "" -"Mandrake Linux 8.2 lets you push your multimedia computer to its limits! Use " -"the latest software to play music and audio files, edit and organize your " -"images and photos, watch TV and videos, and much more" +"Mandrake Linux 9.0 enables you to use the very latest software to play audio " +"files, edit and handle your images or photos, and play videos" msgstr "" -"Mandrake Linux 将您的多媒体电脑推向极限! 使用最新的软件来播放音乐和音频文件," -"编辑和组织您的图像和照片, 看电视和影片, 还有更多等您来尝试" +"Mandrake Linux 9.0 使用最新的软件来播放音乐和音频文件,编辑和组织您的图像和照" +"片, 播放电视和影片" -#: ../../share/advertising/04-develop.pl_.c:9 -msgid "Development" -msgstr "开发平台" +#: ../../share/advertising/05-games.pl_.c:9 +msgid "Games" +msgstr "游戏" -#: ../../share/advertising/04-develop.pl_.c:10 +#: ../../share/advertising/05-games.pl_.c:10 msgid "" -"Mandrake Linux 8.2 is the ultimate development platform. Discover the power " -"of the GNU gcc compiler as well as the best Open Source development " -"environments" +"Mandrake Linux 9.0 provides the best Open Source games - arcade, action, " +"cards, sports, strategy..." msgstr "" -"Mandrake Linux 是最终的开发平台. 来发现 GNU gcc 编译器的强大力量还有最棒的开" -"放源码开发环境" +"Mandrake Linux 9.0 包括了最好的开放源码游戏 - 闯关, 动作, 纸牌, 体育, 策略..." -#: ../../share/advertising/05-contcenter.pl_.c:9 -#: ../../standalone/drakbug_.c:69 +#: ../../share/advertising/06-mcc.pl_.c:9 ../../standalone/drakbug_.c:69 msgid "Mandrake Control Center" msgstr "Mandrake 控制中心" -#: ../../share/advertising/05-contcenter.pl_.c:10 +#: ../../share/advertising/06-mcc.pl_.c:10 msgid "" -"The Mandrake Linux 8.2 Control Center is a one-stop location for fully " -"customizing and configuring your Mandrake system" -msgstr "Mandrake Linux 控制中心让您从一个界面配置 Mandrake 系统的方方面面." +"Mandrake Linux 9.0 provides a powerful tool to fully customize and configure " +"your machine" +msgstr "Mandrake Linux 9.0 提供了强大的工具, 可以全面按照您的要求配置您的系统." -#: ../../share/advertising/06-user.pl_.c:9 +#: ../../share/advertising/07-desktop.pl_.c:9 msgid "User interfaces" msgstr "用户界面" -#: ../../share/advertising/06-user.pl_.c:10 +#: ../../share/advertising/07-desktop.pl_.c:10 msgid "" -"Mandrake Linux 8.2 provides 11 different graphical desktop environments and " -"window managers to choose from including GNOME 1.4, KDE 2.2.2, Window Maker " -"0.8, and the rest" +"Mandrake Linux 9.0 provides 11 user interfaces which can be fully modified: " +"KDE 3, Gnome 2, WindowMaker..." msgstr "" -"Mandrake Linux 提供了 11 种不同的图形桌面环境和窗口管理程序, 任您选择其中包" -"括 GNOME, KDE, Window Maker, 等等" +"Mandrake Linux 9.0 提供 11 种不同的全面改进的用户界面: KDE 3, Gnome 2, " +"WindowMaker..." + +#: ../../share/advertising/08-development.pl_.c:9 +msgid "Development simplified" +msgstr "简化的开发" + +#: ../../share/advertising/08-development.pl_.c:10 +msgid "Mandrake Linux 9.0 is the ultimate development platform" +msgstr "Mandrake Linux 9.0 是最终的开发平台" + +#: ../../share/advertising/08-development.pl_.c:11 +msgid "" +"Use the full power of the GNU gcc 3 compiler as well as the best Open Source " +"development environments" +msgstr "利用 GNU gcc 3 编译器的强大力量, 还有最棒的开放源码开发环境" -#: ../../share/advertising/07-server.pl_.c:9 -msgid "Server Software" -msgstr "服务器软件" +#: ../../share/advertising/09-server.pl_.c:9 +msgid "Turn your machine into a reliable server" +msgstr "把您的机器变成可靠运行的服务器" -#: ../../share/advertising/07-server.pl_.c:10 +#: ../../share/advertising/09-server.pl_.c:10 msgid "" -"Transform your machine into a powerful server with just a few clicks of the " -"mouse: Web server, email, firewall, router, file and print server, ..." +"Transform your machine into a powerful server in a few clicks of your mouse: " +"Web server, mail, firewall, router, file and print server..." msgstr "" -"鼠标点几点, 您的机器就能变成一台强大的服务器:网站服务, 电子邮件, 防火墙, 路由" -"器, 文件及打印服务, ..." +"鼠标点几点, 您的机器就能变成一台强大的服务器: 网站服务, 电子邮件, 防火墙, 路" +"由器, 文件及打印服务, ..." -#: ../../share/advertising/08-games.pl_.c:9 -msgid "Games" -msgstr "游戏" +#: ../../share/advertising/10-mnf.pl_.c:9 +msgid "Optimize your security" +msgstr "安全最优化" + +#: ../../share/advertising/10-mnf.pl_.c:10 +msgid "" +"The MandrakeSecurity range includes the Multi Network Firewall product (M.N." +"F.)" +msgstr "MandrakeSecurity 系列包括多网络防火墙 (M.N.F.)产品" -#: ../../share/advertising/08-games.pl_.c:10 +#: ../../share/advertising/10-mnf.pl_.c:11 msgid "" -"Mandrake Linux 8.2 provides the best Open Source games - arcade, action, " -"cards, sports, strategy, ..." -msgstr "Mandrake Linux 包括了最好的开放源码游戏 -闯关, 动作, 纸牌, 策略, ..." +"This firewall product includes network features which allow you to fulfill " +"all your security needs" +msgstr "这个防火墙产品提供的网络功能将满足您所有的安全性要求" + +#: ../../share/advertising/10-mnf.pl_.c:12 +msgid "This product is available on MandrakeStore website" +msgstr "此产品可以从 MandrakeStore 网站获得" -#: ../../share/advertising/09-MDKcampus.pl_.c:9 -msgid "MandrakeCampus" -msgstr "Mandrake校园" +#: ../../share/advertising/11-mdkstore.pl_.c:9 +msgid "The official MandrakeSoft store" +msgstr "MandrakeSoft 官方网上商店" -#: ../../share/advertising/09-MDKcampus.pl_.c:10 +#: ../../share/advertising/11-mdkstore.pl_.c:10 msgid "" -"Would you like to learn Linux simply, quickly, and for free? MandrakeSoft " -"provides free Linux training, as well as a way to test your progress, at " -"MandrakeCampus -- our online training center" -msgstr "" -"怎样简单, 快捷, 又省钱的学习 Linxu? MandrakeSoft 提供免费的 Linux 培训, 以及" -"测试您自己进步的办法, 就在 Mandrake校园 -- 我们的在线培训中心" +"Our full range of Linux solutions, as well as special offers on products and " +"'goodies', are available online at our e-store" +msgstr "全套的 Linux 产品和服务, 各种特供产品和好玩意儿, 就在我们的在线商场" -#: ../../share/advertising/10-MDKexpert.pl_.c:9 -msgid "MandrakeExpert" -msgstr "Mandrake专家" +#: ../../share/advertising/12-mdkstore.pl_.c:9 +msgid "Strategic partners" +msgstr "战略合作伙伴" -#: ../../share/advertising/10-MDKexpert.pl_.c:10 +#: ../../share/advertising/12-mdkstore.pl_.c:10 msgid "" -"Quality support from the Linux Community, and from MandrakeSoft, is just " -"around the corner. And if you're already a Linux veteran, become an \"Expert" -"\" and share your knowledge at our support website" +"MandrakeSoft works alongside a selection of companies offering professional " +"solutions compatible with Mandrake Linux; a list of these partners is " +"available on the MandrakeStore" msgstr "" -"来自 Linux 社区的优质支持服务, 近在咫尺的 Mandrake专家 -- 我们的在线支持中心." -"如果您精通 Linux, 您就是我们的\"专家\", 请来这里分享您的经验." +"MandrakeSoft 与一些经过挑选的公司合作, 提供与 Mandrake Linux 兼容的专业解决方" +"案; 在 MandrakeStore 可以找到这些合作伙伴" -#: ../../share/advertising/11-consul.pl_.c:9 -msgid "MandrakeConsulting" -msgstr "Mandrake顾问" +#: ../../share/advertising/13-mdkcampus.pl_.c:9 +msgid "Discover MandrakeSoft's training catalogue Linux-Campus" +msgstr "MandrakeSoft 的培训课程 Linux-Campus" -#: ../../share/advertising/11-consul.pl_.c:10 +#: ../../share/advertising/13-mdkcampus.pl_.c:10 msgid "" -"For all of your IT projects, our consultants are ready to analyze your " -"requirements and offer a customized solution. Benefit from MandrakeSoft's " -"vast experience as a Linux producer to provide a true IT alternative for " -"your business organization" +"The training program has been create to respond to the needs of both users " +"and experts (Network and System administrations)" +msgstr "应广大用户和网络和系统管理专家的要求, MandrakeSoft 创立了新的培训计划" + +#: ../../share/advertising/13-mdkcampus.pl_.c:11 +msgid "Certify yourself on Linux" +msgstr "获得您的 Linux 认证" + +#: ../../share/advertising/13-mdkcampus.pl_.c:12 +msgid "" +"Whether you choose to teach yourself online or via our network of training " +"partners, the Linux-Campus catalogue prepares you for the acknowledged LPI " +"certification program (worldwide professional technical certification)" msgstr "" -"我们的顾问队伍随时准备帮助您, 分析需求并实现您的 IT 项目.MandrakeSoft 作为 " -"Linux 提供商所积累的成功经验, 必将为您的企业提供更好的 IT 解决方案" +"不论您选择在线的自学或者参加我们的培训伙伴的课程, Linux-Campus 课程帮助您为" +"参加著名的 LPI 认证计划(全球的专业技术认证)做好准备" -#: ../../share/advertising/12-MDKstore.pl_.c:9 -msgid "MandrakeStore" -msgstr "Mandrake商场" +#: ../../share/advertising/14-mdkexpert.pl_.c:9 +msgid "Become a MandrakeExpert" +msgstr "成为 Mandrake 专家" -#: ../../share/advertising/12-MDKstore.pl_.c:10 +#: ../../share/advertising/14-mdkexpert.pl_.c:10 msgid "" -"A full range of Linux solutions, as well as special offers on products and " -"'goodies', are available online at our e-store" -msgstr "全套的 Linux 产品和服务, 各种特供产品和玩意儿, 就在我们的在线商场" +"Find the solutions to your problems via MandrakeSoft's online support " +"platform" +msgstr "您的问题可以在 MandrakeSoft 的在线支持平台找到答案" -#: ../../share/advertising/13-Nvert.pl_.c:9 +#: ../../share/advertising/14-mdkexpert.pl_.c:11 msgid "" -"For more information on MandrakeSoft's Professional Services and commercial " -"offerings, please see the following web page:" -msgstr "要更多了解 MandrakeSoft 的专业服务和合作机会, 请到下列网页:" +"Join the MandrakeSoft support teams and the Linux Community online to share " +"your knowledge and help others by becoming a recognized Expert on the online " +"technical support website:" +msgstr "" +"在线加入 MandrakeSoft 支持队伍和 Linux 社团, 分享您的知识, 帮助他人,在 " +"MandrakeSoft 的在线技术支持网站, 您就是众人瞩目的专家:" + +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:9 +msgid "MandrakeExpert Corporate" +msgstr "MandrakeExpert 企业版" -#: ../../share/advertising/13-Nvert.pl_.c:11 -msgid "http://www.mandrakesoft.com/sales/contact" -msgstr "http://www.mandrakesoft.com/sales/contact" +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:10 +msgid "An online platform to respond to company's specific support needs" +msgstr "专为响应企业的特殊要求提供专业服务的在线支持平台" + +#: ../../share/advertising/15-mdkexpert-corporate.pl_.c:11 +msgid "" +"All incidents will be followed up by a single qualified MandrakeSoft " +"technical expert." +msgstr "专职的 MandrakeSoft 技术专家会负责处理每个的事件" -#: ../../standalone.pm_.c:40 +#: ../../standalone.pm_.c:41 msgid "Installing packages..." msgstr "正在安装程序 ..." -#: ../../standalone/XFdrake_.c:143 +#: ../../standalone/XFdrake_.c:145 msgid "Please log out and then use Ctrl-Alt-BackSpace" msgstr "请退出, 然后同时按 Ctrl-Alt-BackSpace" -#: ../../standalone/XFdrake_.c:147 +#: ../../standalone/XFdrake_.c:149 #, c-format msgid "Please relog into %s to activate the changes" msgstr "请重新登录到 %s 使您所做的更改生效" -#: ../../standalone/diskdrake_.c:81 -msgid "" -"I can't read your partition table, it's too corrupted for me :(\n" -"I'll try to go on blanking bad partitions" -msgstr "" -"我读不出分区表, 这个分区表破坏得太严重了 :(\n" -"我现在尝试清除坏分区." - #: ../../standalone/drakTermServ_.c:188 msgid "Mandrake Terminal Server Configuration" msgstr "Mandrake 终端服务器配置" @@ -9469,12 +9856,13 @@ msgstr " msgid "Add/Del Clients" msgstr "增加/删除用户" -#: ../../standalone/drakTermServ_.c:246 ../../standalone/drakbackup_.c:3282 -#: ../../standalone/drakbackup_.c:3315 ../../standalone/drakbackup_.c:3341 -#: ../../standalone/drakbackup_.c:3368 ../../standalone/drakbackup_.c:3395 -#: ../../standalone/drakbackup_.c:3434 ../../standalone/drakbackup_.c:3455 -#: ../../standalone/drakbackup_.c:3482 ../../standalone/drakbackup_.c:3508 -#: ../../standalone/drakbackup_.c:3533 ../../standalone/drakfont_.c:700 +#: ../../standalone/drakTermServ_.c:246 ../../standalone/drakbackup_.c:3930 +#: ../../standalone/drakbackup_.c:3963 ../../standalone/drakbackup_.c:3989 +#: ../../standalone/drakbackup_.c:4016 ../../standalone/drakbackup_.c:4043 +#: ../../standalone/drakbackup_.c:4082 ../../standalone/drakbackup_.c:4103 +#: ../../standalone/drakbackup_.c:4130 ../../standalone/drakbackup_.c:4160 +#: ../../standalone/drakbackup_.c:4186 ../../standalone/drakbackup_.c:4211 +#: ../../standalone/drakfont_.c:700 msgid "Help" msgstr "帮助" @@ -9632,8 +10020,8 @@ msgstr "" "\n" "左边列出了自动安装可用的选项" -#: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:548 -#: ../../standalone/scannerdrake_.c:105 +#: ../../standalone/drakautoinst_.c:239 ../../standalone/drakgw_.c:484 +#: ../../standalone/scannerdrake_.c:119 msgid "Congratulations!" msgstr "恭喜!" @@ -9657,20 +10045,23 @@ msgstr " msgid "Remove the last item" msgstr "删除最后一项吗?" -#: ../../standalone/drakbackup_.c:625 +#: ../../standalone/drakbackup_.c:619 msgid "Cron not available yet as non-root" -msgstr "" +msgstr "非 root 用户还不能使用 cron" -#: ../../standalone/drakbackup_.c:731 +#: ../../standalone/drakbackup_.c:725 msgid "WARNING" -msgstr "" +msgstr "警告" -#: ../../standalone/drakbackup_.c:732 -#, fuzzy +#: ../../standalone/drakbackup_.c:726 msgid "FATAL" -msgstr "FAT" +msgstr "严重错误" -#: ../../standalone/drakbackup_.c:744 +#: ../../standalone/drakbackup_.c:727 +msgid "INFO" +msgstr "INFO - 信息" + +#: ../../standalone/drakbackup_.c:739 msgid "" "\n" " DrakBackup Report \n" @@ -9681,7 +10072,7 @@ msgstr "" " 魔力备份向导报告 \n" "\n" -#: ../../standalone/drakbackup_.c:745 +#: ../../standalone/drakbackup_.c:740 msgid "" "\n" " DrakBackup Daemon Report\n" @@ -9693,7 +10084,7 @@ msgstr "" " 魔力备份向导 守护进程报告\n" "\n" -#: ../../standalone/drakbackup_.c:749 +#: ../../standalone/drakbackup_.c:744 msgid "" "\n" " DrakBackup Report Details\n" @@ -9705,12 +10096,22 @@ msgstr "" " DrakBackup 详细报告\n" "\n" -#: ../../standalone/drakbackup_.c:770 ../../standalone/drakbackup_.c:840 -#: ../../standalone/drakbackup_.c:894 +#: ../../standalone/drakbackup_.c:765 ../../standalone/drakbackup_.c:835 +#: ../../standalone/drakbackup_.c:889 msgid "Total progess" msgstr "总进度" -#: ../../standalone/drakbackup_.c:822 +#: ../../standalone/drakbackup_.c:788 +msgid "" +"Sorry, perl-Expect is not installed/enabled. To use\n" +"this feature, install perl-Expect and comment lines 772-774,\n" +" as well as 788,789. Then uncomment line 787." +msgstr "" +"对不起, perl-Expect 没有安装或没有激活. 要使用\n" +"这个功能, 请安装 perl-Expect 并注释第\n" +" 772-774 行, 第 788,789 行. 并取消 787 行的注释." + +#: ../../standalone/drakbackup_.c:817 #, c-format msgid "" "%s exists, delete?\n" @@ -9723,16 +10124,41 @@ msgstr "" "警告: 如果您曾经做过这个步骤, 您可能需要\n" "从服务器的的 authorized_keys 删除该项目." -#: ../../standalone/drakbackup_.c:831 +#: ../../standalone/drakbackup_.c:826 msgid "This may take a moment to generate the keys." msgstr "生成一个钥匙需要一些时间." -#: ../../standalone/drakbackup_.c:838 +#: ../../standalone/drakbackup_.c:833 #, c-format msgid "ERROR: Cannot spawn %s." msgstr "错误: 无法进行 %s." -#: ../../standalone/drakbackup_.c:865 +#: ../../standalone/drakbackup_.c:850 +#, c-format +msgid "No password prompt on %s at port %s" +msgstr "%s 上的端口 %s 没有口令提示" + +#: ../../standalone/drakbackup_.c:851 +#, c-format +msgid "Bad password on %s" +msgstr "%s 口令无效" + +#: ../../standalone/drakbackup_.c:852 +#, c-format +msgid "Permission denied transferring %s to %s" +msgstr "没有权限把 %s 迁移到 %s" + +#: ../../standalone/drakbackup_.c:853 +#, c-format +msgid "Can't find %s on %s" +msgstr "没有 %s 在 %s 上" + +#: ../../standalone/drakbackup_.c:856 +#, c-format +msgid "%s not responding" +msgstr "%s 没有回应" + +#: ../../standalone/drakbackup_.c:860 #, c-format msgid "" "Transfer successful\n" @@ -9742,68 +10168,71 @@ msgid "" "\n" "without being prompted for a password." msgstr "" -"传送成功\n" +"迁移成功\n" "要验证您可以登录到服务器, 请运行:\n" "\n" "ssh -i %s %s\\@%s\n" "\n" "这样不会提问口令." -#: ../../standalone/drakbackup_.c:908 +#: ../../standalone/drakbackup_.c:903 msgid "WebDAV remote site already in sync!" -msgstr "" +msgstr "WebDAV 远程站点已经同步!" -#: ../../standalone/drakbackup_.c:912 +#: ../../standalone/drakbackup_.c:907 msgid "WebDAV transfer failed!" -msgstr "" +msgstr "WebDAV 传输失败!" -#: ../../standalone/drakbackup_.c:934 +#: ../../standalone/drakbackup_.c:928 msgid "No CDR/DVDR in drive!" -msgstr "" +msgstr "驱动器里没有 CDR/DVDR" -#: ../../standalone/drakbackup_.c:938 +#: ../../standalone/drakbackup_.c:932 msgid "Does not appear to be recordable media!" -msgstr "" +msgstr "介质不象是可以写入的!" -#: ../../standalone/drakbackup_.c:942 +#: ../../standalone/drakbackup_.c:936 msgid "Not erasable media!" -msgstr "" +msgstr "介质不能清除!" -#: ../../standalone/drakbackup_.c:981 -#, fuzzy +#: ../../standalone/drakbackup_.c:975 msgid "This may take a moment to erase the media." -msgstr "生成一个钥匙需要一些时间." +msgstr "清空介质需要一些时间." -#: ../../standalone/drakbackup_.c:1045 +#: ../../standalone/drakbackup_.c:1060 msgid "Permission problem accessing CD." -msgstr "" +msgstr "没有适当的权限读写 CD." -#: ../../standalone/drakbackup_.c:1144 ../../standalone/drakbackup_.c:1193 +#: ../../standalone/drakbackup_.c:1087 +#, c-format +msgid "No tape in %s!" +msgstr "%s 里没有磁带!" + +#: ../../standalone/drakbackup_.c:1199 ../../standalone/drakbackup_.c:1248 msgid "Backup system files..." msgstr "备份系统文件..." -#: ../../standalone/drakbackup_.c:1194 ../../standalone/drakbackup_.c:1261 +#: ../../standalone/drakbackup_.c:1249 ../../standalone/drakbackup_.c:1316 msgid "Hard Disk Backup files..." msgstr "备份硬盘文件..." -#: ../../standalone/drakbackup_.c:1206 +#: ../../standalone/drakbackup_.c:1261 msgid "Backup User files..." msgstr "备份用户文件..." -#: ../../standalone/drakbackup_.c:1207 +#: ../../standalone/drakbackup_.c:1262 msgid "Hard Disk Backup Progress..." msgstr "硬盘文件备份进度..." -#: ../../standalone/drakbackup_.c:1260 +#: ../../standalone/drakbackup_.c:1315 msgid "Backup Other files..." msgstr "备份其它文件..." -#: ../../standalone/drakbackup_.c:1266 -#, fuzzy +#: ../../standalone/drakbackup_.c:1321 msgid "No changes to backup!" -msgstr "使用磁带备份" +msgstr "没有需要备份的修改!" -#: ../../standalone/drakbackup_.c:1282 ../../standalone/drakbackup_.c:1305 +#: ../../standalone/drakbackup_.c:1337 ../../standalone/drakbackup_.c:1360 #, c-format msgid "" "\n" @@ -9814,62 +10243,62 @@ msgstr "" "Drakbackup 使用 %s:\n" "\n" -#: ../../standalone/drakbackup_.c:1289 +#: ../../standalone/drakbackup_.c:1344 #, c-format msgid "" -"file list sent by FTP : %s\n" +"file list sent by FTP: %s\n" " " msgstr "" "通过 FTP 发送的文件列表: %s\n" " " -#: ../../standalone/drakbackup_.c:1292 +#: ../../standalone/drakbackup_.c:1347 msgid "" "\n" " FTP connection problem: It was not possible to send your backup files by " "FTP.\n" msgstr "" "\n" -"FTP 联接错误: 无法通过 FTP 传送您的备份文件.\n" +"FTP 连接错误: 无法通过 FTP 传送您的备份文件.\n" -#: ../../standalone/drakbackup_.c:1310 +#: ../../standalone/drakbackup_.c:1365 msgid "" "\n" "Drakbackup activities via CD:\n" "\n" msgstr "" "\n" -"Drakbackup 使用 CD:\n" +"Drakbackup 的光盘操作:\n" "\n" -#: ../../standalone/drakbackup_.c:1315 +#: ../../standalone/drakbackup_.c:1370 msgid "" "\n" "Drakbackup activities via tape:\n" "\n" msgstr "" "\n" -"Drakbackup 使用磁带:\n" +"Drakbackup 的磁带操作:\n" "\n" -#: ../../standalone/drakbackup_.c:1324 +#: ../../standalone/drakbackup_.c:1379 msgid " Error during mail sending. \n" msgstr "发送电子邮件出错. \n" -#: ../../standalone/drakbackup_.c:1346 +#: ../../standalone/drakbackup_.c:1404 msgid "Can't create catalog!" -msgstr "" +msgstr "无法创建 catalog!" -#: ../../standalone/drakbackup_.c:1459 ../../standalone/drakbackup_.c:1470 -#: ../../standalone/drakbackup_.c:1481 ../../standalone/drakfont_.c:1004 +#: ../../standalone/drakbackup_.c:1517 ../../standalone/drakbackup_.c:1528 +#: ../../standalone/drakfont_.c:1004 msgid "File Selection" msgstr "选择文件" -#: ../../standalone/drakbackup_.c:1486 +#: ../../standalone/drakbackup_.c:1556 msgid "Select the files or directories and click on 'Add'" msgstr "选择文件或目录, 然后点击 '增加'" -#: ../../standalone/drakbackup_.c:1525 +#: ../../standalone/drakbackup_.c:1600 msgid "" "\n" "Please check all options that you need.\n" @@ -9877,62 +10306,66 @@ msgstr "" "\n" "请选中您需要的所有选项.\n" -#: ../../standalone/drakbackup_.c:1526 +#: ../../standalone/drakbackup_.c:1601 msgid "" "These options can backup and restore all files in your /etc directory.\n" msgstr "这些选项将备份和恢复您的 /etc 目录中的全部文件\n" -#: ../../standalone/drakbackup_.c:1527 +#: ../../standalone/drakbackup_.c:1602 msgid "Backup your System files. (/etc directory)" msgstr "备份系统文件. (/etc 目录)" -#: ../../standalone/drakbackup_.c:1528 +#: ../../standalone/drakbackup_.c:1603 msgid "Use incremental backup (do not replace old backups)" msgstr "使用增量备份 (不破坏老备份)" -#: ../../standalone/drakbackup_.c:1529 +#: ../../standalone/drakbackup_.c:1604 msgid "Do not include critical files (passwd, group, fstab)" msgstr "不包括关键文件 (passwd, group, fstab) " -#: ../../standalone/drakbackup_.c:1530 +#: ../../standalone/drakbackup_.c:1605 msgid "" "With this option you will be able to restore any version\n" " of your /etc directory." msgstr "整个选项让您把/etc 目录可以恢复到任何以前的版本." -#: ../../standalone/drakbackup_.c:1547 +#: ../../standalone/drakbackup_.c:1622 msgid "Please check all users that you want to include in your backup." msgstr "请选择您希望备份的用户" -#: ../../standalone/drakbackup_.c:1574 +#: ../../standalone/drakbackup_.c:1649 msgid "Do not include the browser cache" msgstr "不包括浏览器缓存" -#: ../../standalone/drakbackup_.c:1575 ../../standalone/drakbackup_.c:1599 +#: ../../standalone/drakbackup_.c:1650 ../../standalone/drakbackup_.c:1674 msgid "Use Incremental Backups (do not replace old backups)" msgstr "使用增量备份 (不破坏老备份)" -#: ../../standalone/drakbackup_.c:1597 ../../standalone/drakfont_.c:1058 +#: ../../standalone/drakbackup_.c:1672 ../../standalone/drakfont_.c:1058 msgid "Remove Selected" msgstr "删除所有选中的" -#: ../../standalone/drakbackup_.c:1635 +#: ../../standalone/drakbackup_.c:1710 msgid "Windows (FAT32)" msgstr "Windows(FAT32)" -#: ../../standalone/drakbackup_.c:1674 +#: ../../standalone/drakbackup_.c:1749 msgid "Users" msgstr "用户" -#: ../../standalone/drakbackup_.c:1700 +#: ../../standalone/drakbackup_.c:1775 msgid "Use network connection to backup" msgstr "使用网络连接作备份" -#: ../../standalone/drakbackup_.c:1706 +#: ../../standalone/drakbackup_.c:1777 +msgid "Net Method:" +msgstr "网络方法:" + +#: ../../standalone/drakbackup_.c:1781 msgid "Use Expect for SSH" msgstr "把 Expect 用于 SSH" -#: ../../standalone/drakbackup_.c:1707 +#: ../../standalone/drakbackup_.c:1782 msgid "" "Create/Transfer\n" "backup keys for SSH" @@ -9940,7 +10373,7 @@ msgstr "" "创建/传送\n" " SSH 的备份密钥" -#: ../../standalone/drakbackup_.c:1708 +#: ../../standalone/drakbackup_.c:1783 msgid "" " Transfer \n" "Now" @@ -9948,15 +10381,15 @@ msgstr "" " 现在 \n" "传送" -#: ../../standalone/drakbackup_.c:1709 +#: ../../standalone/drakbackup_.c:1784 msgid "Keys in place already" msgstr "已经有密钥了" -#: ../../standalone/drakbackup_.c:1713 +#: ../../standalone/drakbackup_.c:1788 msgid "Please enter the host name or IP." msgstr "请输入主机名或 IP 地址." -#: ../../standalone/drakbackup_.c:1718 +#: ../../standalone/drakbackup_.c:1793 msgid "" "Please enter the directory (or module) to\n" " put the backup on this host." @@ -9964,67 +10397,62 @@ msgstr "" "请输入这个主机上存放备份的\n" " 目录(或模块)." -#: ../../standalone/drakbackup_.c:1723 +#: ../../standalone/drakbackup_.c:1798 msgid "Please enter your login" msgstr "请输入您的登录名" -#: ../../standalone/drakbackup_.c:1728 +#: ../../standalone/drakbackup_.c:1803 msgid "Please enter your password" msgstr "请输入您的口令" -#: ../../standalone/drakbackup_.c:1734 +#: ../../standalone/drakbackup_.c:1809 msgid "Remember this password" msgstr "记住口令" -#: ../../standalone/drakbackup_.c:1745 +#: ../../standalone/drakbackup_.c:1820 msgid "Need hostname, username and password!" msgstr "需要 主机名, 用户名, 和口令!" -#: ../../standalone/drakbackup_.c:1841 +#: ../../standalone/drakbackup_.c:1915 msgid "Use CD/DVDROM to backup" msgstr "使用 CD/DVDROM 备份" -#: ../../standalone/drakbackup_.c:1844 +#: ../../standalone/drakbackup_.c:1918 msgid "" "Please choose your CD/DVD device\n" "(Press Enter to propogate settings to other fields.\n" "This field isn't necessary, only a tool to fill in the form.)" msgstr "请选择您的 CD/DVD 设备" -#: ../../standalone/drakbackup_.c:1849 +#: ../../standalone/drakbackup_.c:1923 msgid "Please choose your CD/DVD media size" msgstr "请选择您使用的 CD/DVD 介质容量." -#: ../../standalone/drakbackup_.c:1855 -#, fuzzy +#: ../../standalone/drakbackup_.c:1929 msgid "Please check for multisession CD" -msgstr "如果您使用 CDRW 介质, 请选中这里" +msgstr "如果您使用多段 CD, 请选中这里" -#: ../../standalone/drakbackup_.c:1861 +#: ../../standalone/drakbackup_.c:1935 msgid "Please check if you are using CDRW media" msgstr "如果您使用 CDRW 介质, 请选中这里" -#: ../../standalone/drakbackup_.c:1867 -#, fuzzy +#: ../../standalone/drakbackup_.c:1941 msgid "Please check if you want to erase your RW media (1st Session)" -msgstr "如果您要清除您的 RW 介质, 请选中这里" +msgstr "如果您要清除您的 RW 介质(第一节), 请选中这里" -#: ../../standalone/drakbackup_.c:1868 -#, fuzzy +#: ../../standalone/drakbackup_.c:1942 msgid " Erase Now " -msgstr "" -" 现在 \n" -"传送" +msgstr " 现在清除 " -#: ../../standalone/drakbackup_.c:1874 +#: ../../standalone/drakbackup_.c:1948 msgid "Please check if you are using a DVDR device" msgstr "如果您使用 DVDR 设备, 请选中这里" -#: ../../standalone/drakbackup_.c:1880 +#: ../../standalone/drakbackup_.c:1954 msgid "Please check if you are using a DVDRAM device" msgstr "如果您使用 DVDRAM 设备, 请选中这里" -#: ../../standalone/drakbackup_.c:1893 +#: ../../standalone/drakbackup_.c:1967 msgid "" "Please enter your CD Writer device name\n" " ex: 0,1,0" @@ -10032,99 +10460,100 @@ msgstr "" "请输入您的刻盘机设备名\n" " 如: 0,1,0" -#: ../../standalone/drakbackup_.c:1926 -#, fuzzy +#: ../../standalone/drakbackup_.c:2000 msgid "No CD device defined!" -msgstr "旧的设备文件" +msgstr "没有发现 CD 设备!" -#: ../../standalone/drakbackup_.c:1974 +#: ../../standalone/drakbackup_.c:2048 msgid "Use tape to backup" msgstr "使用磁带备份" -#: ../../standalone/drakbackup_.c:1977 +#: ../../standalone/drakbackup_.c:2051 msgid "Please enter the device name to use for backup" msgstr "请输入用于备份的设备名" -#: ../../standalone/drakbackup_.c:1983 +#: ../../standalone/drakbackup_.c:2057 msgid "Please check if you want to use the non-rewinding device." msgstr "如果您使用不回卷的设备, 请选择这里." -#: ../../standalone/drakbackup_.c:1989 +#: ../../standalone/drakbackup_.c:2063 msgid "Please check if you want to erase your tape before the backup." msgstr "如果需要在备份前清除磁带, 请选择这里." -#: ../../standalone/drakbackup_.c:1995 +#: ../../standalone/drakbackup_.c:2069 msgid "Please check if you want to eject your tape after the backup." msgstr "如果需要在备份后, , 请选择这里." -#: ../../standalone/drakbackup_.c:2001 ../../standalone/drakbackup_.c:2074 -#: ../../standalone/drakbackup_.c:3025 +#: ../../standalone/drakbackup_.c:2075 ../../standalone/drakbackup_.c:2149 +#: ../../standalone/drakbackup_.c:3116 msgid "" "Please enter the maximum size\n" " allowed for Drakbackup" msgstr "请输入允许 Drakbackup 使用的最大空间" -#: ../../standalone/drakbackup_.c:2066 +#: ../../standalone/drakbackup_.c:2140 msgid "Please enter the directory to save to:" msgstr "请输入要保存文件的目录名:" -#: ../../standalone/drakbackup_.c:2080 ../../standalone/drakbackup_.c:3031 +#: ../../standalone/drakbackup_.c:2155 ../../standalone/drakbackup_.c:3122 msgid "Use quota for backup files." msgstr "使用限额备份文件." -#: ../../standalone/drakbackup_.c:2146 +#: ../../standalone/drakbackup_.c:2221 msgid "Network" msgstr "网络" -#: ../../standalone/drakbackup_.c:2151 +#: ../../standalone/drakbackup_.c:2226 msgid "CDROM / DVDROM" msgstr "CDROM / DVDROM" -#: ../../standalone/drakbackup_.c:2156 +#: ../../standalone/drakbackup_.c:2231 msgid "HardDrive / NFS" msgstr "硬盘 / NFS" -#: ../../standalone/drakbackup_.c:2161 +#: ../../standalone/drakbackup_.c:2236 msgid "Tape" msgstr "磁带" -#: ../../standalone/drakbackup_.c:2175 ../../standalone/drakbackup_.c:2179 -#: ../../standalone/drakbackup_.c:2183 +#: ../../standalone/drakbackup_.c:2250 ../../standalone/drakbackup_.c:2254 +#: ../../standalone/drakbackup_.c:2258 msgid "hourly" msgstr "每小时" -#: ../../standalone/drakbackup_.c:2176 ../../standalone/drakbackup_.c:2180 -#: ../../standalone/drakbackup_.c:2183 +#: ../../standalone/drakbackup_.c:2251 ../../standalone/drakbackup_.c:2255 +#: ../../standalone/drakbackup_.c:2258 msgid "daily" msgstr "每日" -#: ../../standalone/drakbackup_.c:2177 ../../standalone/drakbackup_.c:2181 -#: ../../standalone/drakbackup_.c:2183 +#: ../../standalone/drakbackup_.c:2252 ../../standalone/drakbackup_.c:2256 +#: ../../standalone/drakbackup_.c:2258 msgid "weekly" msgstr "每周" -#: ../../standalone/drakbackup_.c:2178 ../../standalone/drakbackup_.c:2182 -#: ../../standalone/drakbackup_.c:2183 +#: ../../standalone/drakbackup_.c:2253 ../../standalone/drakbackup_.c:2257 +#: ../../standalone/drakbackup_.c:2258 msgid "monthly" msgstr "每月" -#: ../../standalone/drakbackup_.c:2196 +#: ../../standalone/drakbackup_.c:2271 msgid "Use daemon" msgstr "使用守护进程" -#: ../../standalone/drakbackup_.c:2201 +#: ../../standalone/drakbackup_.c:2276 msgid "" "Please choose the time \n" "interval between each backup" msgstr "请选择您希望备份时间间隔" -#: ../../standalone/drakbackup_.c:2207 +#: ../../standalone/drakbackup_.c:2282 msgid "" "Please choose the\n" "media for backup." -msgstr "请选择备份介质." +msgstr "" +"请选择\n" +"备份使用的介质." -#: ../../standalone/drakbackup_.c:2214 +#: ../../standalone/drakbackup_.c:2289 msgid "" "Please be sure that the cron daemon is included in your services. \n" "\n" @@ -10134,71 +10563,71 @@ msgstr "" "\n" "请注意现在所有的 '网络' 介质都要利用硬盘." -#: ../../standalone/drakbackup_.c:2251 -msgid "Send mail report after each backup to :" +#: ../../standalone/drakbackup_.c:2326 +msgid "Send mail report after each backup to:" msgstr "在每次备份后发送邮件报告给 :" -#: ../../standalone/drakbackup_.c:2257 +#: ../../standalone/drakbackup_.c:2332 msgid "Delete Hard Drive tar files after backup to other media." -msgstr "" +msgstr "备份到其它介质之后删除硬盘上的 tar 文件." -#: ../../standalone/drakbackup_.c:2296 +#: ../../standalone/drakbackup_.c:2371 msgid "What" msgstr "内容" -#: ../../standalone/drakbackup_.c:2301 +#: ../../standalone/drakbackup_.c:2376 msgid "Where" msgstr "位置" -#: ../../standalone/drakbackup_.c:2306 +#: ../../standalone/drakbackup_.c:2381 msgid "When" msgstr "时间" -#: ../../standalone/drakbackup_.c:2311 +#: ../../standalone/drakbackup_.c:2386 msgid "More Options" msgstr "参数" -#: ../../standalone/drakbackup_.c:2330 ../../standalone/drakbackup_.c:3873 +#: ../../standalone/drakbackup_.c:2405 ../../standalone/drakbackup_.c:4530 msgid "Drakbackup Configuration" msgstr "DrakBackup 配置" -#: ../../standalone/drakbackup_.c:2348 +#: ../../standalone/drakbackup_.c:2423 msgid "Please choose where you want to backup" msgstr "请选择您希望在哪里做备份" -#: ../../standalone/drakbackup_.c:2350 +#: ../../standalone/drakbackup_.c:2425 msgid "on Hard Drive" msgstr "在硬盘上" -#: ../../standalone/drakbackup_.c:2360 +#: ../../standalone/drakbackup_.c:2435 msgid "across Network" msgstr "通过网络" -#: ../../standalone/drakbackup_.c:2370 +#: ../../standalone/drakbackup_.c:2445 msgid "on CDROM" msgstr "在CDROM上" -#: ../../standalone/drakbackup_.c:2378 +#: ../../standalone/drakbackup_.c:2453 msgid "on Tape Device" msgstr "在磁带机上" -#: ../../standalone/drakbackup_.c:2421 +#: ../../standalone/drakbackup_.c:2496 msgid "Please choose what you want to backup" msgstr "请选择您要备份的文件" -#: ../../standalone/drakbackup_.c:2422 +#: ../../standalone/drakbackup_.c:2497 msgid "Backup system" msgstr "备份系统" -#: ../../standalone/drakbackup_.c:2423 +#: ../../standalone/drakbackup_.c:2498 msgid "Backup Users" msgstr "备份用户" -#: ../../standalone/drakbackup_.c:2426 +#: ../../standalone/drakbackup_.c:2501 msgid "Select user manually" msgstr "手工选择用户" -#: ../../standalone/drakbackup_.c:2508 +#: ../../standalone/drakbackup_.c:2584 msgid "" "\n" "Backup Sources: \n" @@ -10206,7 +10635,7 @@ msgstr "" "\n" "备份来源 : \n" -#: ../../standalone/drakbackup_.c:2509 +#: ../../standalone/drakbackup_.c:2585 msgid "" "\n" "- System Files:\n" @@ -10214,7 +10643,7 @@ msgstr "" "\n" "- 系统文件:\n" -#: ../../standalone/drakbackup_.c:2511 +#: ../../standalone/drakbackup_.c:2587 msgid "" "\n" "- User Files:\n" @@ -10222,7 +10651,7 @@ msgstr "" "\n" "- 用户文件:\n" -#: ../../standalone/drakbackup_.c:2513 +#: ../../standalone/drakbackup_.c:2589 msgid "" "\n" "- Other Files:\n" @@ -10230,22 +10659,24 @@ msgstr "" "\n" "- 其他文件:\n" -#: ../../standalone/drakbackup_.c:2515 +#: ../../standalone/drakbackup_.c:2591 #, c-format msgid "" "\n" -"- Save on Hard drive on path : %s\n" +"- Save on Hard drive on path: %s\n" msgstr "" "\n" -"- 保存在硬盘路径 : %s\n" +"- 保存在硬盘路径: %s\n" -#: ../../standalone/drakbackup_.c:2518 +#: ../../standalone/drakbackup_.c:2594 msgid "" "\n" "- Delete hard drive tar files after backup.\n" msgstr "" +"\n" +"- 备份后删除硬盘的 tar 文件.\n" -#: ../../standalone/drakbackup_.c:2524 +#: ../../standalone/drakbackup_.c:2600 msgid "" "\n" "- Burn to CD" @@ -10253,43 +10684,43 @@ msgstr "" "\n" "- 烧光盘" -#: ../../standalone/drakbackup_.c:2525 +#: ../../standalone/drakbackup_.c:2601 msgid "RW" msgstr "RW" -#: ../../standalone/drakbackup_.c:2526 +#: ../../standalone/drakbackup_.c:2602 #, c-format -msgid " on device : %s" +msgid " on device: %s" msgstr " 使用设备: %s" -#: ../../standalone/drakbackup_.c:2527 +#: ../../standalone/drakbackup_.c:2603 msgid " (multi-session)" -msgstr "" +msgstr " (多道)" -#: ../../standalone/drakbackup_.c:2528 +#: ../../standalone/drakbackup_.c:2604 #, c-format msgid "" "\n" -"- Save to Tape on device : %s" +"- Save to Tape on device: %s" msgstr "" "\n" -"- 保存到磁带设备 : %s" +"- 保存到磁带设备: %s" -#: ../../standalone/drakbackup_.c:2529 +#: ../../standalone/drakbackup_.c:2605 #, c-format msgid "\t\tErase=%s" msgstr "\t\tErase=%s" -#: ../../standalone/drakbackup_.c:2532 +#: ../../standalone/drakbackup_.c:2608 #, c-format msgid "" "\n" -"- Save via %s on host : %s\n" +"- Save via %s on host: %s\n" msgstr "" "\n" -"- 通过 %s 保存到主机 : %s\n" +"- 通过 %s 保存到主机: %s\n" -#: ../../standalone/drakbackup_.c:2533 +#: ../../standalone/drakbackup_.c:2609 #, c-format msgid "" "\t\t user name: %s\n" @@ -10298,7 +10729,7 @@ msgstr "" "\t\t 用户名: %s\n" "\t\t 路径: %s \n" -#: ../../standalone/drakbackup_.c:2534 +#: ../../standalone/drakbackup_.c:2610 msgid "" "\n" "- Options:\n" @@ -10306,60 +10737,60 @@ msgstr "" "\n" "- 选项:\n" -#: ../../standalone/drakbackup_.c:2535 +#: ../../standalone/drakbackup_.c:2611 msgid "\tDo not include System Files\n" msgstr "\t不包括系统文件\n" -#: ../../standalone/drakbackup_.c:2538 +#: ../../standalone/drakbackup_.c:2614 msgid "\tBackups use tar and bzip2\n" msgstr "\t使用 tar 和 bzip2 备份\n" -#: ../../standalone/drakbackup_.c:2540 +#: ../../standalone/drakbackup_.c:2616 msgid "\tBackups use tar and gzip\n" msgstr "\t使用 tar 和 gzip 备份\n" -#: ../../standalone/drakbackup_.c:2543 +#: ../../standalone/drakbackup_.c:2619 #, c-format msgid "" "\n" -"- Daemon (%s) include :\n" +"- Daemon (%s) include:\n" msgstr "" "\n" -"- Daemon (%s) include :\n" +"- Daemon (%s) include:\n" -#: ../../standalone/drakbackup_.c:2544 +#: ../../standalone/drakbackup_.c:2620 msgid "\t-Hard drive.\n" msgstr "\t-硬盘.\n" -#: ../../standalone/drakbackup_.c:2545 +#: ../../standalone/drakbackup_.c:2621 msgid "\t-CDROM.\n" msgstr "\t-光盘.\n" -#: ../../standalone/drakbackup_.c:2546 +#: ../../standalone/drakbackup_.c:2622 msgid "\t-Tape \n" msgstr "\t-磁带 \n" -#: ../../standalone/drakbackup_.c:2547 +#: ../../standalone/drakbackup_.c:2623 msgid "\t-Network by FTP.\n" msgstr "\t-网络通过FTP.\n" -#: ../../standalone/drakbackup_.c:2548 +#: ../../standalone/drakbackup_.c:2624 msgid "\t-Network by SSH.\n" msgstr "\t-网络 通过SSH\n" -#: ../../standalone/drakbackup_.c:2549 +#: ../../standalone/drakbackup_.c:2625 msgid "\t-Network by rsync.\n" msgstr "\t-网络 通过 rsync.\n" -#: ../../standalone/drakbackup_.c:2550 +#: ../../standalone/drakbackup_.c:2626 msgid "\t-Network by webdav.\n" msgstr "\t-网络 通过webdav.\n" -#: ../../standalone/drakbackup_.c:2552 +#: ../../standalone/drakbackup_.c:2628 msgid "No configuration, please click Wizard or Advanced.\n" msgstr "没有配置, 请选择导师或高级.\n" -#: ../../standalone/drakbackup_.c:2558 +#: ../../standalone/drakbackup_.c:2634 msgid "" "List of data to restore:\n" "\n" @@ -10367,7 +10798,7 @@ msgstr "" "要恢复数据的清单:\n" "\n" -#: ../../standalone/drakbackup_.c:2725 +#: ../../standalone/drakbackup_.c:2801 msgid "" "List of data corrupted:\n" "\n" @@ -10375,147 +10806,262 @@ msgstr "" "已毁坏数据的清单:\n" "\n" -#: ../../standalone/drakbackup_.c:2727 +#: ../../standalone/drakbackup_.c:2803 msgid "Please uncheck or remove it on next time." msgstr "请取消选择并删除它." -#: ../../standalone/drakbackup_.c:2737 +#: ../../standalone/drakbackup_.c:2813 msgid "Backup files are corrupted" msgstr "备份文件损坏了" -#: ../../standalone/drakbackup_.c:2758 -#, fuzzy +#: ../../standalone/drakbackup_.c:2834 msgid " All of your selected data have been " -msgstr "\t您选择的全部数据已经\t" +msgstr " 您选择的全部数据已经 " -#: ../../standalone/drakbackup_.c:2759 +#: ../../standalone/drakbackup_.c:2835 #, c-format msgid " Successfuly Restored on %s " msgstr "\t成功的恢复到 %s " -#: ../../standalone/drakbackup_.c:2877 +#: ../../standalone/drakbackup_.c:2953 msgid " Restore Configuration " msgstr " 恢复的配置 " -#: ../../standalone/drakbackup_.c:2895 +#: ../../standalone/drakbackup_.c:2971 msgid "OK to restore the other files." msgstr "OK 将恢复其他文件" -#: ../../standalone/drakbackup_.c:2912 +#: ../../standalone/drakbackup_.c:2988 msgid "User list to restore (only the most recent date per user is important)" msgstr "可恢复的用户清单 (每个用户最近的数据是重要的)" -#: ../../standalone/drakbackup_.c:2975 +#: ../../standalone/drakbackup_.c:3066 msgid "Backup the system files before:" msgstr "先备份系统文件:" -#: ../../standalone/drakbackup_.c:2977 +#: ../../standalone/drakbackup_.c:3068 msgid "please choose the date to restore" msgstr "请选择需要恢复的数据" -#: ../../standalone/drakbackup_.c:3014 +#: ../../standalone/drakbackup_.c:3105 msgid "Use Hard Disk to backup" msgstr "使用硬盘备份文件" -#: ../../standalone/drakbackup_.c:3017 +#: ../../standalone/drakbackup_.c:3108 msgid "Please enter the directory to save:" msgstr "请输入目录名:" -#: ../../standalone/drakbackup_.c:3060 +#: ../../standalone/drakbackup_.c:3151 msgid "FTP Connection" msgstr "FTP 连接" -#: ../../standalone/drakbackup_.c:3067 +#: ../../standalone/drakbackup_.c:3158 msgid "Secure Connection" msgstr "加密连接" -#: ../../standalone/drakbackup_.c:3093 +#: ../../standalone/drakbackup_.c:3184 msgid "Restore from Hard Disk." msgstr "从硬盘恢复" -#: ../../standalone/drakbackup_.c:3095 +#: ../../standalone/drakbackup_.c:3186 msgid "Please enter the directory where backups are stored" msgstr "请输入保存备份的目录" -#: ../../standalone/drakbackup_.c:3157 +#: ../../standalone/drakbackup_.c:3254 msgid "Select another media to restore from" msgstr "请选择另一载体" -#: ../../standalone/drakbackup_.c:3159 +#: ../../standalone/drakbackup_.c:3256 msgid "Other Media" msgstr "载体" -#: ../../standalone/drakbackup_.c:3164 +#: ../../standalone/drakbackup_.c:3261 msgid "Restore system" msgstr "恢复系统" -#: ../../standalone/drakbackup_.c:3165 +#: ../../standalone/drakbackup_.c:3262 msgid "Restore Users" msgstr "恢复用户文件" -#: ../../standalone/drakbackup_.c:3166 +#: ../../standalone/drakbackup_.c:3263 msgid "Restore Other" msgstr "恢复其它文件" -#: ../../standalone/drakbackup_.c:3168 +#: ../../standalone/drakbackup_.c:3265 msgid "select path to restore (instead of /)" msgstr "选择将要恢复到的路径 (/ 除外)" -#: ../../standalone/drakbackup_.c:3172 +#: ../../standalone/drakbackup_.c:3269 msgid "Do new backup before restore (only for incremental backups.)" msgstr "恢复前做新的备份 (只适用于增量备份.)" -#: ../../standalone/drakbackup_.c:3174 +#: ../../standalone/drakbackup_.c:3271 msgid "Remove user directories before restore." msgstr "恢复前删除用户目录." -#: ../../standalone/drakbackup_.c:3232 +#: ../../standalone/drakbackup_.c:3384 +msgid "" +"Restore Selected\n" +"Catalog Entry" +msgstr "" +"恢复选中的\n" +"目录项" + +#: ../../standalone/drakbackup_.c:3394 +msgid "" +"Restore Selected\n" +"Files" +msgstr "" +"恢复选中的\n" +"文件" + +#: ../../standalone/drakbackup_.c:3411 +msgid "" +"Change\n" +"Restore Path" +msgstr "" +"修改\n" +"恢复路径" + +#: ../../standalone/drakbackup_.c:3477 +#, c-format +msgid "Backup files not found at %s." +msgstr "在 %s 没有发现备份文件." + +#: ../../standalone/drakbackup_.c:3490 +#, c-format +msgid "" +"Insert the CD with volume label %s\n" +" in the CD drive under mount point /mnt/cdrom" +msgstr "" +"请把卷标为 %s 的光盘插入\n" +"到加载于 /mnt/cdrom 的光盘驱动器" + +#: ../../standalone/drakbackup_.c:3490 +msgid "Restore From CD" +msgstr "从光盘恢复" + +#: ../../standalone/drakbackup_.c:3492 +#, c-format +msgid "Not the correct CD label. Disk is labelled %s." +msgstr "光盘盘标不对. 这张盘的卷标是 %s." + +#: ../../standalone/drakbackup_.c:3502 +#, c-format +msgid "" +"Insert the tape with volume label %s\n" +" in the tape drive device %s" +msgstr "" +"请把卷标为 %s 的磁带装进\n" +"磁带机 %s" + +#: ../../standalone/drakbackup_.c:3502 +msgid "Restore From Tape" +msgstr "从磁带恢复" + +#: ../../standalone/drakbackup_.c:3504 +#, c-format +msgid "Not the correct tape label. Tape is labelled %s." +msgstr "磁带标记不对. 这盘磁带是 %s" + +#: ../../standalone/drakbackup_.c:3524 +msgid "Restore Via Network" +msgstr "通过网络恢复" + +#: ../../standalone/drakbackup_.c:3524 +#, c-format +msgid "Restore Via Network Protocol: %s" +msgstr "恢复使用的网络协议: %s" + +#: ../../standalone/drakbackup_.c:3525 +msgid "Host Name" +msgstr "主机名" + +#: ../../standalone/drakbackup_.c:3526 +msgid "Host Path or Module" +msgstr "主机路径和模块" + +#: ../../standalone/drakbackup_.c:3533 +msgid "Password required" +msgstr "需要口令" + +#: ../../standalone/drakbackup_.c:3539 +msgid "Username required" +msgstr "需要用户名" + +#: ../../standalone/drakbackup_.c:3542 +msgid "Hostname required" +msgstr "需要主机名字" + +#: ../../standalone/drakbackup_.c:3547 +msgid "Path or Module required" +msgstr "要求提供路径或模块" + +#: ../../standalone/drakbackup_.c:3560 +msgid "Files Restored..." +msgstr "文件已恢复..." + +#: ../../standalone/drakbackup_.c:3563 +msgid "Restore Failed..." +msgstr "恢复失败..." + +#: ../../standalone/drakbackup_.c:3801 msgid "Restore all backups" msgstr "恢复所有备份" -#: ../../standalone/drakbackup_.c:3241 +#: ../../standalone/drakbackup_.c:3810 msgid "Custom Restore" msgstr "定制恢复" -#: ../../standalone/drakbackup_.c:3287 ../../standalone/drakbackup_.c:3320 -#: ../../standalone/drakbackup_.c:3346 ../../standalone/drakbackup_.c:3373 -#: ../../standalone/drakbackup_.c:3400 ../../standalone/drakbackup_.c:3460 -#: ../../standalone/drakbackup_.c:3487 ../../standalone/drakbackup_.c:3513 +#: ../../standalone/drakbackup_.c:3856 +msgid "CD in place - continue." +msgstr "光盘就绪 - 继续." + +#: ../../standalone/drakbackup_.c:3862 +msgid "Browse to new restore repository." +msgstr "浏览新的恢复仓库." + +#: ../../standalone/drakbackup_.c:3865 +msgid "Restore From Catalog" +msgstr "从目录恢复" + +#: ../../standalone/drakbackup_.c:3893 +#, fuzzy +msgid "Restore Progress" +msgstr "恢复用户文件" + +#: ../../standalone/drakbackup_.c:3935 ../../standalone/drakbackup_.c:3968 +#: ../../standalone/drakbackup_.c:3994 ../../standalone/drakbackup_.c:4021 +#: ../../standalone/drakbackup_.c:4048 ../../standalone/drakbackup_.c:4108 +#: ../../standalone/drakbackup_.c:4135 ../../standalone/drakbackup_.c:4165 +#: ../../standalone/drakbackup_.c:4191 msgid "Previous" msgstr "前一步" -#: ../../standalone/drakbackup_.c:3291 ../../standalone/drakbackup_.c:3377 +#: ../../standalone/drakbackup_.c:3939 ../../standalone/drakbackup_.c:4025 #: ../../standalone/logdrake_.c:223 msgid "Save" msgstr "保存" -#: ../../standalone/drakbackup_.c:3350 +#: ../../standalone/drakbackup_.c:3998 msgid "Build Backup" msgstr "正在备份" -#: ../../standalone/drakbackup_.c:3404 ../../standalone/drakbackup_.c:3974 +#: ../../standalone/drakbackup_.c:4052 ../../standalone/drakbackup_.c:4632 msgid "Restore" msgstr "恢复" -#: ../../standalone/drakbackup_.c:3553 -msgid "" -"Please Build backup before to restore it...\n" -" or verify that your path to save is correct." -msgstr "" -"先建立备份然后才能恢复它...\n" -" 或者检查您输入的保存路径是否正确." - -#: ../../standalone/drakbackup_.c:3574 +#: ../../standalone/drakbackup_.c:4231 msgid "" -"Error during sendmail\n" -" your report mail was not sent\n" +"Error during sendmail.\n" +" Your report mail was not sent.\n" " Please configure sendmail" msgstr "" "使用 sendmail 出错\n" -" 您的报告没有发出\n" +" 您的报告邮件没有发出.\n" " 请配置 sendmail" -#: ../../standalone/drakbackup_.c:3598 +#: ../../standalone/drakbackup_.c:4255 msgid "" "The following packages need to be installed:\n" " @list_of_rpm_to_install" @@ -10523,7 +11069,7 @@ msgstr "" "下列软件包将要被安装:\n" " @list_of_rpm_to_install" -#: ../../standalone/drakbackup_.c:3621 +#: ../../standalone/drakbackup_.c:4278 msgid "" "Error during sending file via FTP.\n" " Please correct your FTP configuration." @@ -10531,19 +11077,19 @@ msgstr "" "通过 FTP 发送文件出错.\n" " 请改正您的 FTP 配置." -#: ../../standalone/drakbackup_.c:3644 +#: ../../standalone/drakbackup_.c:4301 msgid "Please select data to restore..." msgstr "请选择要恢复的数据..." -#: ../../standalone/drakbackup_.c:3665 +#: ../../standalone/drakbackup_.c:4322 msgid "Please select media for backup..." msgstr "请选择使用的载体..." -#: ../../standalone/drakbackup_.c:3687 +#: ../../standalone/drakbackup_.c:4344 msgid "Please select data to backup..." msgstr "请选择需备份的数据..." -#: ../../standalone/drakbackup_.c:3709 +#: ../../standalone/drakbackup_.c:4366 msgid "" "No configuration file found \n" "please click Wizard or Advanced." @@ -10551,59 +11097,59 @@ msgstr "" "没有找到配置文件\n" "请点击向导或高级." -#: ../../standalone/drakbackup_.c:3730 +#: ../../standalone/drakbackup_.c:4387 msgid "Under Devel ... please wait." msgstr "开发中...请等待新版本." -#: ../../standalone/drakbackup_.c:3811 +#: ../../standalone/drakbackup_.c:4468 msgid "Backup system files" msgstr "备份系统文件" -#: ../../standalone/drakbackup_.c:3813 +#: ../../standalone/drakbackup_.c:4470 msgid "Backup user files" msgstr "备份用户文件" -#: ../../standalone/drakbackup_.c:3815 +#: ../../standalone/drakbackup_.c:4472 msgid "Backup other files" msgstr "备份其他文件" -#: ../../standalone/drakbackup_.c:3817 ../../standalone/drakbackup_.c:3850 +#: ../../standalone/drakbackup_.c:4474 ../../standalone/drakbackup_.c:4507 msgid "Total Progress" msgstr "总进展" -#: ../../standalone/drakbackup_.c:3841 +#: ../../standalone/drakbackup_.c:4498 msgid "files sending by FTP" msgstr "正在通过 FTP 发送文件" -#: ../../standalone/drakbackup_.c:3845 +#: ../../standalone/drakbackup_.c:4502 msgid "Sending files..." msgstr "正在发送文件..." -#: ../../standalone/drakbackup_.c:3931 +#: ../../standalone/drakbackup_.c:4588 msgid "Backup Now from configuration file" msgstr "现在备份,从配置文件" -#: ../../standalone/drakbackup_.c:3936 +#: ../../standalone/drakbackup_.c:4593 msgid "View Backup Configuration." msgstr "查看备份配置" -#: ../../standalone/drakbackup_.c:3956 +#: ../../standalone/drakbackup_.c:4614 msgid "Wizard Configuration" msgstr "向导配置" -#: ../../standalone/drakbackup_.c:3961 +#: ../../standalone/drakbackup_.c:4619 msgid "Advanced Configuration" msgstr "高级配置" -#: ../../standalone/drakbackup_.c:3966 +#: ../../standalone/drakbackup_.c:4624 msgid "Backup Now" msgstr "现在备份" -#: ../../standalone/drakbackup_.c:3996 +#: ../../standalone/drakbackup_.c:4658 msgid "Drakbackup" msgstr "魔力备份" -#: ../../standalone/drakbackup_.c:4045 +#: ../../standalone/drakbackup_.c:4707 msgid "" "options description:\n" "\n" @@ -10663,7 +11209,7 @@ msgstr "" " \n" "\n" -#: ../../standalone/drakbackup_.c:4075 +#: ../../standalone/drakbackup_.c:4737 msgid "" "\n" " Some errors during sendmail are caused by \n" @@ -10676,7 +11222,7 @@ msgstr "" " 您需要在 /etc/postfix/main.cf 中设置 myhostname 或 mydomain\n" "\n" -#: ../../standalone/drakbackup_.c:4083 +#: ../../standalone/drakbackup_.c:4745 msgid "" "options description:\n" "\n" @@ -10720,62 +11266,58 @@ msgstr "" "\n" " - 备份系统文件:\n" " \n" -"\tThis option allows you to backup your /etc directory,\n" -"\twhich contains all configuration files. Please be\n" -"\tcareful during the restore step to not overwrite:\n" +"\t这个选项允许您备份您的 /etc 目录,\n" +"\t它包含了所有的配置文件. 在恢复过程中\n" +"\t要小心, 不要覆盖:\n" "\t\t/etc/passwd \n" "\t\t/etc/group \n" "\t\t/etc/fstab\n" "\n" " - 备份用户文件: \n" "\n" -"\tThis option allows you select all users that you want \n" -"\tto backup.\n" -"\tTo preserve disk space, it is recommended that you \n" -"\tdo not include web browser's cache.\n" +"\t这个选项允许您备份您选择的所有用户 \n" +"\t为了节省磁盘空间, 建议您不要包括 \n" +"\t网络浏览器的缓存文件.\n" "\n" " - 备份其它文件: \n" "\n" -"\tThis option allows you to add more data to save.\n" -"\tWith the other backup it's not possible at the \n" -"\tmoment to select incremental backup.\t\t\n" +"\t这个选项允许您备份您添加的其他文件.\n" +"\t如果您选择备份其它文件 \n" +"\t就不能选择增量备份.\t\t\n" " \n" -" - Incremental Backups:\n" -"\n" -"\tThe incremental backup is the most powerful \n" -"\toption for backup. This option allows you \n" -"\tto backup all your data the first time, and \n" -"\tonly the changed afterward.\n" -"\tThen you will be able, during the restore\n" -"\tstep, to restore your data from a specified\n" -"\tdate.\n" -"\tIf you have not selected this option all\n" -"\told backups are deleted before each backup. \n" -"\n" -"\n" +" - 增量备份:\n" +"\t增量备份是功能最强大的选项.\n" +"\t您可以使用这个功能 \n" +"\t第一次备份您所有的数据,\n" +"\t以后只备份改变的部分.\n" +"\t这样在恢复时候,\n" +"\t您可以把数据恢复到指定\n" +"\t日期的状态.\n" +"\t如果不选择增量备份\n" +"\t每次备份之前会删除旧的备份.\n" -#: ../../standalone/drakbackup_.c:4122 +#: ../../standalone/drakbackup_.c:4784 msgid "" "restore description:\n" " \n" -"Only the most recent date will be used ,because with incremental \n" -"backups it is necesarry to restore one by one each older backups.\n" +"Only the most recent date will be used, because with incremental \n" +"backups it is necessary to restore one by one each older backup.\n" "\n" -"So if you don't like to restore a user please unselect all his\n" -"check box.\n" +"So if you don't want to restore a user please unselect all their\n" +"check boxes.\n" "\n" -"Otherwise, you are able to select only one of this\n" +"Otherwise, you are able to select only one of these.\n" "\n" " - Incremental Backups:\n" "\n" "\tThe incremental backup is the most powerful \n" -"\toption to use backup, this option allow you \n" -"\tto backup all your data the first time, and \n" -"\tonly the changed after.\n" -"\tSo you will be able during the restore\n" +"\toption to use. This option allows you to \n" +"\tbackup all of your data the first time, and \n" +"\tonly the changed data after.\n" +"\tSo you will be able, during the restore\n" "\tstep, to restore your data from a specified\n" "\tdate.\n" -"\tIf you have not selected this options all\n" +"\tIf you have not selected this option all\n" "\told backups are deleted before each backup. \n" "\n" "\n" @@ -10783,17 +11325,17 @@ msgid "" msgstr "" "恢复描述:\n" " \n" -"只能使用最近的日期 , 因为增量备份要求 \n" +"只能使用最近的日期 , 因为使用增量备份要求 \n" "一个接着一个恢复较早的备份.\n" "\n" -"如果不需要恢复某个用户, 请清空\n" +"如果不要恢复某个用户, 请清空\n" "他的所有选择框.\n" "\n" -"另外, 您只能选择下列之一\n" +"否则, 您可以选择下列之一\n" "\n" " - 增量备份:\n" "\n" -"\t最强大的备份功能, \n" +"\t增量备份是功能最强大的选项.\n" "\t您可以使用这个功能 \n" "\t第一次备份您所有的数据,\n" "\t以后只备份改变的部分.\n" @@ -10806,19 +11348,19 @@ msgstr "" "\n" "\n" -#: ../../standalone/drakbackup_.c:4148 ../../standalone/drakbackup_.c:4225 +#: ../../standalone/drakbackup_.c:4810 ../../standalone/drakbackup_.c:4887 msgid "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " msgstr "" " Copyright (C) 2001 MandrakeSoft by DUPONT Sebastien " -#: ../../standalone/drakbackup_.c:4150 ../../standalone/drakbackup_.c:4227 +#: ../../standalone/drakbackup_.c:4812 ../../standalone/drakbackup_.c:4889 msgid "" " updates 2002 MandrakeSoft by Stew Benedict " msgstr "" " updates 2002 MandrakeSoft by Stew Benedict " -#: ../../standalone/drakbackup_.c:4152 ../../standalone/drakbackup_.c:4229 +#: ../../standalone/drakbackup_.c:4814 ../../standalone/drakbackup_.c:4891 msgid "" " This program is free software; you can redistribute it and/or modify\n" " it under the terms of the GNU General Public License as published by\n" @@ -10849,7 +11391,7 @@ msgstr "" " 地址是 Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, " "MA 02111-1307, USA." -#: ../../standalone/drakbackup_.c:4166 +#: ../../standalone/drakbackup_.c:4828 msgid "" "Description:\n" "\n" @@ -10924,7 +11466,7 @@ msgstr "" " \n" "\n" -#: ../../standalone/drakbackup_.c:4204 +#: ../../standalone/drakbackup_.c:4866 msgid "" "options description:\n" "\n" @@ -10942,7 +11484,7 @@ msgstr "" "然后把它传到服务器.\n" "\n" -#: ../../standalone/drakbackup_.c:4213 +#: ../../standalone/drakbackup_.c:4875 msgid "" "\n" "Restore Backup Problems:\n" @@ -10963,7 +11505,7 @@ msgstr "" "一定不要手工修改备份数据文件.\n" ".\n" -#: ../../standalone/drakbackup_.c:4243 +#: ../../standalone/drakbackup_.c:4905 msgid "" "Description:\n" "\n" @@ -11071,9 +11613,8 @@ msgid " --report - program should be one of mandrake tools\n" msgstr " --report - 程序是 mandrake 的一个工具\n" #: ../../standalone/drakbug_.c:49 -#, fuzzy msgid " --incident - program should be one of mandrake tools\n" -msgstr " --report - 程序是 mandrake 的一个工具\n" +msgstr " --incident - 程序是一个 mandrake 的工具\n" #: ../../standalone/drakbug_.c:64 msgid "Mandrake Bug Report Tool" @@ -11087,9 +11628,9 @@ msgstr " msgid "Synchronization tool" msgstr "同步工具" -#: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:85 -#: ../../standalone/drakbug_.c:150 ../../standalone/drakbug_.c:152 -#: ../../standalone/drakbug_.c:156 +#: ../../standalone/drakbug_.c:72 ../../standalone/drakbug_.c:86 +#: ../../standalone/drakbug_.c:151 ../../standalone/drakbug_.c:153 +#: ../../standalone/drakbug_.c:157 msgid "Standalone Tools" msgstr "独立工具" @@ -11133,23 +11674,23 @@ msgstr "Userdrake魔 msgid "Configuration Wizards" msgstr "配置向导" -#: ../../standalone/drakbug_.c:96 +#: ../../standalone/drakbug_.c:97 msgid "Application:" msgstr "应用程序:" -#: ../../standalone/drakbug_.c:97 +#: ../../standalone/drakbug_.c:98 msgid "Package: " msgstr "软件包:" -#: ../../standalone/drakbug_.c:98 +#: ../../standalone/drakbug_.c:99 msgid "Kernel:" msgstr "内核:" -#: ../../standalone/drakbug_.c:99 +#: ../../standalone/drakbug_.c:100 msgid "Release: " msgstr "发行: " -#: ../../standalone/drakbug_.c:114 +#: ../../standalone/drakbug_.c:115 msgid "" "\n" "\n" @@ -11168,19 +11709,19 @@ msgstr "" "传送到服务器.\n" "\n" -#: ../../standalone/drakbug_.c:135 +#: ../../standalone/drakbug_.c:136 msgid "Report" msgstr "报告" -#: ../../standalone/drakbug_.c:165 +#: ../../standalone/drakbug_.c:166 msgid "Not installed" msgstr "没有安装" -#: ../../standalone/drakbug_.c:182 +#: ../../standalone/drakbug_.c:183 msgid "connecting to Bugzilla wizard ..." msgstr "连接 Bugzilla 故障报告精灵 ..." -#: ../../standalone/drakbug_.c:189 +#: ../../standalone/drakbug_.c:190 msgid "No browser available! Please install one" msgstr "没有可用的浏览器! 请安装一个" @@ -11622,7 +12163,7 @@ msgid "Font List" msgstr "所有字库" #: ../../standalone/drakfont_.c:909 -msgid "Choose the applications that will support the fonts :" +msgid "Choose the applications that will support the fonts:" msgstr "请选择使用新字体的应用程序 :" #: ../../standalone/drakfont_.c:918 @@ -11693,19 +12234,19 @@ msgstr "删 msgid "Post Uninstall" msgstr "删除后的设定" -#: ../../standalone/drakgw_.c:42 ../../standalone/drakgw_.c:195 +#: ../../standalone/drakgw_.c:43 ../../standalone/drakgw_.c:188 msgid "Internet Connection Sharing" msgstr "共享互联网连接" -#: ../../standalone/drakgw_.c:121 +#: ../../standalone/drakgw_.c:119 msgid "Sorry, we support only 2.4 kernels." msgstr "对不起, 我们只支持 2.4 内核" -#: ../../standalone/drakgw_.c:133 +#: ../../standalone/drakgw_.c:130 msgid "Internet Connection Sharing currently enabled" msgstr "互联网连接共享现在已经激活" -#: ../../standalone/drakgw_.c:134 +#: ../../standalone/drakgw_.c:131 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently enabled.\n" @@ -11717,31 +12258,31 @@ msgstr "" "\n" "您要做什么?" -#: ../../standalone/drakgw_.c:138 +#: ../../standalone/drakgw_.c:135 msgid "disable" msgstr "禁止" -#: ../../standalone/drakgw_.c:138 ../../standalone/drakgw_.c:163 +#: ../../standalone/drakgw_.c:135 ../../standalone/drakgw_.c:160 msgid "dismiss" msgstr "离开" -#: ../../standalone/drakgw_.c:138 ../../standalone/drakgw_.c:163 +#: ../../standalone/drakgw_.c:135 ../../standalone/drakgw_.c:160 msgid "reconfigure" msgstr "重新配置" -#: ../../standalone/drakgw_.c:141 +#: ../../standalone/drakgw_.c:138 msgid "Disabling servers..." msgstr "停止服务..." -#: ../../standalone/drakgw_.c:149 +#: ../../standalone/drakgw_.c:146 msgid "Internet connection sharing is now disabled." msgstr "互联网连接共享现在被禁止了" -#: ../../standalone/drakgw_.c:158 +#: ../../standalone/drakgw_.c:155 msgid "Internet Connection Sharing currently disabled" msgstr "互联网连接共享现在被禁止" -#: ../../standalone/drakgw_.c:159 +#: ../../standalone/drakgw_.c:156 msgid "" "The setup of Internet connection sharing has already been done.\n" "It's currently disabled.\n" @@ -11753,19 +12294,19 @@ msgstr "" "\n" "您要做什么?" -#: ../../standalone/drakgw_.c:163 +#: ../../standalone/drakgw_.c:160 msgid "enable" msgstr "启动" -#: ../../standalone/drakgw_.c:170 +#: ../../standalone/drakgw_.c:167 msgid "Enabling servers..." msgstr "启动服务..." -#: ../../standalone/drakgw_.c:175 +#: ../../standalone/drakgw_.c:172 msgid "Internet connection sharing is now enabled." msgstr "互联网连接共享现在已经激活" -#: ../../standalone/drakgw_.c:196 +#: ../../standalone/drakgw_.c:189 msgid "" "You are about to configure your computer to share its Internet connection.\n" "With that feature, other computers on your local network will be able to use " @@ -11778,31 +12319,31 @@ msgstr "" "\n" "注意: 您需要有局域网(LAN)使用的网卡." -#: ../../standalone/drakgw_.c:222 +#: ../../standalone/drakgw_.c:215 #, c-format msgid "Interface %s (using module %s)" msgstr "网卡 %s (使用 %s 模块)" -#: ../../standalone/drakgw_.c:223 +#: ../../standalone/drakgw_.c:216 #, c-format msgid "Interface %s" msgstr "网卡 %s" -#: ../../standalone/drakgw_.c:231 +#: ../../standalone/drakgw_.c:224 msgid "No network adapter on your system!" msgstr "您系统中没有网络卡!" -#: ../../standalone/drakgw_.c:232 +#: ../../standalone/drakgw_.c:225 msgid "" "No ethernet network adapter has been detected on your system. Please run the " "hardware configuration tool." msgstr "您的系统里没有配置以太网卡. 请运行硬件配置工具." -#: ../../standalone/drakgw_.c:238 +#: ../../standalone/drakgw_.c:231 msgid "Network interface" msgstr "网络接口卡" -#: ../../standalone/drakgw_.c:239 +#: ../../standalone/drakgw_.c:232 #, c-format msgid "" "There is only one configured network adapter on your system:\n" @@ -11817,17 +12358,17 @@ msgstr "" "\n" "对这块网卡配置您的局域网." -#: ../../standalone/drakgw_.c:248 +#: ../../standalone/drakgw_.c:241 msgid "" "Please choose what network adapter will be connected to your Local Area " "Network." msgstr "请选择哪个网卡将连接您的局域网." -#: ../../standalone/drakgw_.c:266 +#: ../../standalone/drakgw_.c:259 msgid "Network interface already configured" msgstr "已完成网络配置" -#: ../../standalone/drakgw_.c:267 +#: ../../standalone/drakgw_.c:260 #, c-format msgid "" "Warning, the network adapter (%s) is already configured.\n" @@ -11842,15 +12383,15 @@ msgstr "" "\n" "如果您知道怎样做, 也可以手工配置." -#: ../../standalone/drakgw_.c:272 +#: ../../standalone/drakgw_.c:265 msgid "Automatic reconfiguration" msgstr "自动重新配置" -#: ../../standalone/drakgw_.c:273 +#: ../../standalone/drakgw_.c:266 msgid "Show current interface configuration" msgstr "修改当前网络界面的配置" -#: ../../standalone/drakgw_.c:275 +#: ../../standalone/drakgw_.c:268 #, c-format msgid "" "Current configuration of `%s':\n" @@ -11867,7 +12408,7 @@ msgstr "" "IP 属性: %s\n" "其它: %s" -#: ../../standalone/drakgw_.c:287 +#: ../../standalone/drakgw_.c:280 msgid "" "I can keep your current configuration and assume you already set up a DHCP " "server; in that case please verify I correctly read the C-Class Network that " @@ -11884,53 +12425,41 @@ msgstr "" "否则,我会重新配置网卡, 并重新配置您的 DHCP 服务.\n" "\n" -#: ../../standalone/drakgw_.c:292 +#: ../../standalone/drakgw_.c:285 msgid "C-Class Local Network" msgstr "C类本地网络" -#: ../../standalone/drakgw_.c:293 +#: ../../standalone/drakgw_.c:286 msgid "(This) DHCP Server IP" msgstr "DHCP 服务器 IP" -#: ../../standalone/drakgw_.c:294 +#: ../../standalone/drakgw_.c:287 msgid "Re-configure interface and DHCP server" msgstr "重新配置网络界面和 DHCP " -#: ../../standalone/drakgw_.c:301 +#: ../../standalone/drakgw_.c:294 msgid "The Local Network did not finish with `.0', bailing out." msgstr "本地网络没有以`.0'结束, 已经修改" -#: ../../standalone/drakgw_.c:312 +#: ../../standalone/drakgw_.c:305 #, c-format msgid "Potential LAN address conflict found in current config of %s!\n" msgstr "在当前的 %s 配置中发现可能的 LAN 地址冲突! \n" -#: ../../standalone/drakgw_.c:320 -msgid "Firewalling configuration detected!" -msgstr "发现防火墙配置!" - -#: ../../standalone/drakgw_.c:321 -msgid "" -"Warning! An existing firewalling configuration has been detected. You may " -"need some manual fix after installation." -msgstr "" -"警告! 发现原来的配置利用了防火墙功能.\n" -"您需要在安装之后手工修改." - -#: ../../standalone/drakgw_.c:328 +#: ../../standalone/drakgw_.c:315 msgid "Configuring..." msgstr "正在配置..." -#: ../../standalone/drakgw_.c:329 +#: ../../standalone/drakgw_.c:316 msgid "Configuring scripts, installing software, starting servers..." msgstr "正在配置脚本, 安装软件, 启动服务程序 ..." -#: ../../standalone/drakgw_.c:365 +#: ../../standalone/drakgw_.c:352 #, c-format msgid "Problems installing package %s" msgstr "安装 %s 软件包出现问题" -#: ../../standalone/drakgw_.c:549 +#: ../../standalone/drakgw_.c:485 msgid "" "Everything has been configured.\n" "You may now share Internet connection with other computers on your Local " @@ -11940,23 +12469,23 @@ msgstr "" "您现在可以利用自动网络设置 (DHCP).让您的局域网上其它的电脑共享您的互联网连接" "了." -#: ../../standalone/drakgw_.c:566 +#: ../../standalone/drakgw_.c:504 msgid "The setup has already been done, but it's currently disabled." msgstr "配置已经完成.它当前已经被禁止." -#: ../../standalone/drakgw_.c:567 +#: ../../standalone/drakgw_.c:505 msgid "The setup has already been done, and it's currently enabled." msgstr "配置已经完成.它当前已经被启动." -#: ../../standalone/drakgw_.c:568 +#: ../../standalone/drakgw_.c:506 msgid "No Internet Connection Sharing has ever been configured." msgstr "互联网连接共享没有配置" -#: ../../standalone/drakgw_.c:573 +#: ../../standalone/drakgw_.c:511 msgid "Internet connection sharing configuration" msgstr "互联网连接共享配置" -#: ../../standalone/drakgw_.c:580 +#: ../../standalone/drakgw_.c:518 #, c-format msgid "" "Welcome to the Internet Connection Sharing utility!\n" @@ -11971,8 +12500,152 @@ msgstr "" "\n" "点击''配置''运行配置精灵." +#: ../../standalone/draksound_.c:46 +msgid "No Sound Card detected!" +msgstr "没有发现声卡!" + +#: ../../standalone/draksound_.c:47 +msgid "" +"No Sound Card has been detected on your machine. Please verify that a Linux-" +"supported Sound Card is correctly plugged in.\n" +"\n" +"\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" +msgstr "" +"在您的机器上没有检测到声卡. 请检查您是否正确的安装了您的声卡, 它是否被 Linux " +"支持.\n" +"\n" +"\n" +"您可以访问硬件数据库:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" + +#: ../../standalone/draksplash_.c:32 +msgid "package ImageMagick is required for correct working" +msgstr "要正常工作需要软件包 ImageMagick" + +#: ../../standalone/draksplash_.c:76 +msgid "first step creation" +msgstr "第一步创建" + +#: ../../standalone/draksplash_.c:77 +msgid "final resolution" +msgstr "最终分辨率" + +#: ../../standalone/draksplash_.c:78 ../../standalone/draksplash_.c:170 +msgid "choose image file" +msgstr "选择图像文件" + +#: ../../standalone/draksplash_.c:79 +msgid "Theme name" +msgstr "主题名称" + +#: ../../standalone/draksplash_.c:81 +msgid "make bootsplash step 2" +msgstr "创建开机屏幕第二步" + +#: ../../standalone/draksplash_.c:82 +msgid "go to lilosplash configuration" +msgstr "继续 lilosplash 的配置" + +#: ../../standalone/draksplash_.c:83 +msgid "quit" +msgstr "退出" + +#: ../../standalone/draksplash_.c:84 +msgid "save theme" +msgstr "保存主题" + +#: ../../standalone/draksplash_.c:85 +msgid "browse" +msgstr "浏览" + +#: ../../standalone/draksplash_.c:98 ../../standalone/draksplash_.c:159 +msgid "Configure bootsplash picture" +msgstr "配置开机画面图片" + +#: ../../standalone/draksplash_.c:99 +msgid "x coordinate of text box in number of character" +msgstr "文本栏的 X 坐标, 按字符数计算" + +#: ../../standalone/draksplash_.c:100 +msgid "y coordinate of text box in number of character" +msgstr "文本栏的 Y 坐标, 按字符数计算" + +#: ../../standalone/draksplash_.c:101 +msgid "text width" +msgstr "文本宽度" + +#: ../../standalone/draksplash_.c:102 +msgid "text box height" +msgstr "文本栏高度" + +#: ../../standalone/draksplash_.c:103 +msgid "the progress bar x coordinate of its upper left corner" +msgstr "进展条的左上角的 X 坐标" + +#: ../../standalone/draksplash_.c:104 +msgid "the progress bar y coordinate of its upper left corner" +msgstr "进展条的左上角的 Y 坐标" + +#: ../../standalone/draksplash_.c:105 +msgid "the width of the progress bar" +msgstr "进展条的宽度" + +#: ../../standalone/draksplash_.c:106 +msgid "the heigth of the progress bar" +msgstr "进展条的高度" + +#: ../../standalone/draksplash_.c:107 +msgid "the color of the progress bar" +msgstr "进展条的颜色" + +#: ../../standalone/draksplash_.c:119 +msgid "go back" +msgstr "后退" + +#: ../../standalone/draksplash_.c:120 +msgid "preview" +msgstr "预览" + +#: ../../standalone/draksplash_.c:121 +msgid "choose color" +msgstr "选择颜色" + +#: ../../standalone/draksplash_.c:124 +msgid "Display logo on Console" +msgstr "在控制台显示 LOGO" + +#: ../../standalone/draksplash_.c:125 +msgid "Make kernel message quiet by default" +msgstr "缺省设定内核消息不显示" + +#: ../../standalone/draksplash_.c:161 ../../standalone/draksplash_.c:330 +#, c-format +msgid "This theme haven't yet any bootsplash in %s !" +msgstr "这个主题的 %s 里面还没有任何开机画面!" + +#: ../../standalone/draksplash_.c:213 +msgid "saving Bootsplash theme..." +msgstr "保存开机画面主题..." + +#: ../../standalone/draksplash_.c:436 +msgid "ProgressBar color selection" +msgstr "进展条颜色选择" + +#: ../../standalone/draksplash_.c:454 +msgid "You must choose an image file first!" +msgstr "您必须先选择一个图像文件!" + +#: ../../standalone/draksplash_.c:463 +msgid "Generating preview ..." +msgstr "正在生成预览 ..." + #: ../../standalone/drakxtv_.c:49 -#, fuzzy msgid "" "XawTV isn't installed!\n" "\n" @@ -11989,13 +12662,13 @@ msgstr "" "XawTV 没有安装!\n" "\n" "\n" -"如果您有电视卡但是 DrakX 即没有检测到它 ( bttv\n" -"模块不在 \"/etc/modules\"中) 也没有安装 xawtv, 请运行\n" +"如果您有电视卡但是 DrakX 即没有检测到它 ( bttv 或 saa7134 \n" +"模块都不在 \"/etc/modules\"中) 也没有安装 xawtv, 请运行\n" " \"lspcidrake -v -f\" 并把结果发送给 \"install\\@mandrakesoft.com\"\n" "标题写 \"undetected TV card\".\n" "\n" "\n" -"手工安装, 作为 root 从控制台运行 \"urpmi xawtv\"." +"您可以作为 root 从控制台运行 \"urpmi xawtv\" 来安装它." #: ../../standalone/drakxtv_.c:66 msgid "Canada (cable)" @@ -12059,7 +12732,7 @@ msgstr " #: ../../standalone/drakxtv_.c:72 msgid "Australian Optus cable TV" -msgstr "" +msgstr "Australian Optus cable TV" #: ../../standalone/drakxtv_.c:107 msgid "" @@ -12070,11 +12743,11 @@ msgstr "" "您的电视制式和国家" #: ../../standalone/drakxtv_.c:109 -msgid "TV norm :" +msgid "TV norm:" msgstr "电视制式 :" #: ../../standalone/drakxtv_.c:110 -msgid "Area :" +msgid "Area:" msgstr "地区 :" #: ../../standalone/drakxtv_.c:114 @@ -12156,7 +12829,7 @@ msgstr " msgid "The change is done, but to be effective you must logout" msgstr "修改已经完成, 不过您必须退出登录修改才会生效" -#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:517 +#: ../../standalone/logdrake_.c:85 ../../standalone/logdrake_.c:515 msgid "logdrake" msgstr "logdrake" @@ -12325,8 +12998,8 @@ msgstr " #: ../../standalone/logdrake_.c:431 msgid "" -"You will receive an alert if one of the selected service is no more running" -msgstr "如果选中的服务中有任何一个没有运行您将收到警报" +"You will receive an alert if one of the selected services is no more running" +msgstr "如果选中的服务中有任何一个停止运行您将收到警报" #: ../../standalone/logdrake_.c:443 msgid "load setting" @@ -12344,19 +13017,19 @@ msgstr " msgid "Please enter your email address below " msgstr "请输入您的邮件地址 " -#: ../../standalone/logdrake_.c:499 +#: ../../standalone/logdrake_.c:497 msgid "Save as.." msgstr "另存为.." -#: ../../standalone/mousedrake_.c:43 +#: ../../standalone/mousedrake_.c:45 msgid "Please, choose the type of your mouse." msgstr "请选择您的鼠标是那一种类型." -#: ../../standalone/mousedrake_.c:57 +#: ../../standalone/mousedrake_.c:58 msgid "Emulate third button?" msgstr "模拟三键" -#: ../../standalone/printerdrake_.c:48 +#: ../../standalone/printerdrake_.c:57 msgid "Reading printer data ..." msgstr "读取打印机数据..." @@ -12368,21 +13041,32 @@ msgstr " msgid "Test ports" msgstr "测试端口" -#: ../../standalone/scannerdrake_.c:52 +#: ../../standalone/scannerdrake_.c:53 ../../standalone/scannerdrake_.c:68 +#: ../../standalone/scannerdrake_.c:81 +#, c-format +msgid "The %s is not supported by this version of Mandrake Linux." +msgstr "这个版本的 Mandrake Linux 不支持 %s " + +#: ../../standalone/scannerdrake_.c:56 #, c-format -msgid "%s found on %s, configure it ?" -msgstr "发现 %s 连接在 %s, 是否配置 ?" +msgid "%s found on %s, configure it?" +msgstr "发现 %s 连接在 %s 上, 是否配置它?" #: ../../standalone/scannerdrake_.c:59 +#, c-format +msgid "%s is not in the scanner database, configure it manually?" +msgstr "扫描仪数据库中没有 %s, 要手工配置它吗?" + +#: ../../standalone/scannerdrake_.c:65 msgid "Select a scanner" msgstr "选择扫描仪" -#: ../../standalone/scannerdrake_.c:79 +#: ../../standalone/scannerdrake_.c:93 #, c-format msgid "This %s scanner is unsupported" msgstr "扫描仪 %s 暂时不支持" -#: ../../standalone/scannerdrake_.c:93 +#: ../../standalone/scannerdrake_.c:107 #, c-format msgid "" "Scannerdrake was not able to detect your %s scanner.\n" @@ -12391,11 +13075,11 @@ msgstr "" "Scannerdrake 没能检测到您的 %s 扫描仪.\n" "请选择您的扫描仪连接的设备." -#: ../../standalone/scannerdrake_.c:95 +#: ../../standalone/scannerdrake_.c:109 msgid "choose device" msgstr "选择设备" -#: ../../standalone/scannerdrake_.c:101 +#: ../../standalone/scannerdrake_.c:115 #, c-format msgid "" "This %s scanner must be configured by printerdrake.\n" @@ -12405,7 +13089,7 @@ msgstr "" "这个 %s 扫描仪必须使用 printerdrake 来配置.\n" "您可以在Mandrake 控制中心的硬件部分打开 printerdrake." -#: ../../standalone/scannerdrake_.c:106 +#: ../../standalone/scannerdrake_.c:120 #, c-format msgid "" "Your %s scanner has been configured.\n" @@ -12415,12 +13099,12 @@ msgstr "" "您的 %s 扫描仪已经配置好.\n" "现在您可以从应用程序菜单的 多媒体/图象 中使用 ``XSane'' 来扫描文档. " -#: ../../standalone/service_harddrake_.c:57 +#: ../../standalone/service_harddrake_.c:39 #, c-format msgid "Some devices in the \"%s\" hardware class were removed:\n" msgstr "删除了一些 \"%s\" 类别的设备:\n" -#: ../../standalone/service_harddrake_.c:61 +#: ../../standalone/service_harddrake_.c:43 #, c-format msgid "" "\n" @@ -12429,36 +13113,6 @@ msgstr "" "\n" "添加了一些 %s 类别的设备:\n" -#: ../../standalone/tinyfirewall_.c:30 -msgid "Firewalling Configuration" -msgstr "配置防火墙" - -#: ../../standalone/tinyfirewall_.c:43 -msgid "Firewalling configuration" -msgstr "配置防火墙" - -#: ../../standalone/tinyfirewall_.c:78 -msgid "" -"Firewalling\n" -"\n" -"You already have set up a firewall.\n" -"Click on Configure to change or remove the firewall" -msgstr "" -"防火墙\n" -"\n" -"你已经配置了防火墙.\n" -"点击 配置 修改或删除防火墙" - -#: ../../standalone/tinyfirewall_.c:82 -msgid "" -"Firewalling\n" -"\n" -"Click on Configure to set up a standard firewall" -msgstr "" -"防火墙\n" -"\n" -"点击 配置 设置一标准防火墙" - #: ../../steps.pm_.c:14 msgid "Choose your language" msgstr "选择语言" @@ -12531,208 +13185,7 @@ msgstr " msgid "Exit install" msgstr "退出安装" -#: ../../tinyfirewall.pm_.c:9 -msgid "" -"tinyfirewall configurator\n" -"\n" -"This configures a personal firewall for this Mandrake Linux machine.\n" -"For a powerful dedicated firewall solution, please look to the\n" -"specialized MandrakeSecurity Firewall distribution." -msgstr "" -"微型防火墙配置\n" -"\n" -"配置 Mandrake 个人防火墙.\n" -"如果要配置强大的专用防火墙, 请考虑使用专门的\n" -"MandrakeSecurity 防火墙发行版." - -#: ../../tinyfirewall.pm_.c:14 -msgid "" -"We'll now ask you questions about which services you'd like to allow\n" -"the Internet to connect to. Please think carefully about these\n" -"questions, as your computer's security is important.\n" -"\n" -"Please, if you're not currently using one of these services, firewall\n" -"it off. You can change this configuration anytime you like by\n" -"re-running this application!" -msgstr "" -"你得选择开放的服务, 防火墙将关闭不使用的服务. 你只有重新运行该程序才能改变配" -"置!" - -#: ../../tinyfirewall.pm_.c:21 -msgid "" -"Are you running a web server on this machine that you need the whole\n" -"Internet to see? If you are running a webserver that only needs to be\n" -"accessed by this machine, you can safely answer NO here.\n" -"\n" -msgstr "" -"允许互联网用户使用您的 Web 服务?\n" -"如果您的 Web 服务器只需要从本机访问, 请选择\"否\".\n" -"\n" - -#: ../../tinyfirewall.pm_.c:26 -msgid "" -"Are you running a name server on this machine? If you didn't set one\n" -"up to give away IP and zone information to the whole Internet, please\n" -"answer no.\n" -"\n" -msgstr "" -"您在这个机器上运行域名服务吗?\n" -"如果不需要对整个互联网提供 IP 地址的信息, 请您选择\"否\".\n" -"\n" - -#: ../../tinyfirewall.pm_.c:31 -msgid "" -"Do you want to allow incoming Secure Shell (ssh) connections? This\n" -"is a telnet-replacement that you might use to login. If you're using\n" -"telnet now, you should definitely switch to ssh. telnet is not\n" -"encrypted -- so some attackers can steal your password if you use\n" -"it. ssh is encrypted and doesn't allow for this eavesdropping." -msgstr "" -"您想允许安全命令界面ssh接入吗?这个服务可以替代 telnet 用于远程登录. 如果您现" -"在\n" -"正使用 telnet, 您绝对应该改用 ssh. telnet 没有\n" -"加密措施 -- 攻击者能够从网络上窃取您的口令.\n" -"而 ssh 的通信是加密的, 因此没有这种危险." - -#: ../../tinyfirewall.pm_.c:36 -msgid "" -"Do you want to allow incoming telnet connections?\n" -"This is horribly unsafe, as we explained in the previous screen. We\n" -"strongly recommend answering No here and using ssh in place of\n" -"telnet.\n" -msgstr "" -"您是否允许 telnet 接入?\n" -"如我们在前面解释过的, 这样做极其危险. \n" -"强烈建议您在这里选择 '否', 并用 ssh \n" -"代替 telnet.\n" - -#: ../../tinyfirewall.pm_.c:41 -msgid "" -"Are you running an FTP server here that you need accessible to the\n" -"Internet? If you are, we strongly recommend that you only use it for\n" -"Anonymous transfers. Any passwords sent by FTP can be stolen by some\n" -"attackers, since FTP also uses no encryption for transferring passwords.\n" -msgstr "" -"您是否需要从互联网上访问这里的 ftp 服务?\n" -"如果这样, 我们强烈建议您只使用匿名的 ftp 服务.\n" -"通过 FTP 传送的口令有可能被攻击者窃取,\n" -"因为 FTP 传送口令时不使用任何加密.\n" - -#: ../../tinyfirewall.pm_.c:46 -msgid "" -"Are you running a mail server here? If you're sending you \n" -"messages through pine, mutt or any other text-based mail client,\n" -"you probably are. Otherwise, you should firewall this off.\n" -"\n" -msgstr "" -"要运行 mail 服务器吗? 如果你用 pine, mutt 或其他命令行 email 客户端\n" -"发送email, 您就需要. 否则, 请让防火墙关掉 email 服务.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:51 -msgid "" -"Are you running a POP or IMAP server here? This would\n" -"be used to host non-web-based mail accounts for people via \n" -"this machine.\n" -"\n" -msgstr "" -"您运行POP和IMAP服务吗? \n" -"这些服务帮助其他用户通过该机器收取 email.\n" -"\n" - -#: ../../tinyfirewall.pm_.c:56 -msgid "" -"You appear to be running a 2.2 kernel. If your network IP\n" -"is automatically set by a computer in your home or office \n" -"(dynamically assigned), we need to allow for this. Is\n" -"this the case?\n" -msgstr "您好像在运行 2.2内核. 您的网络动态分配 IP，对不对?\n" - -#: ../../tinyfirewall.pm_.c:61 -msgid "" -"Is your computer getting time syncronized to another computer?\n" -"Mostly, this is used by medium-large Unix/Linux organizations\n" -"to synchronize time for logging and such. If you're not part\n" -"of a larger office and haven't heard of this, you probably \n" -"aren't." -msgstr "" -"您的计算机是否与其它机器同步时间?\n" -"通常，大中型 Unix/Linux组织需要同步计算机的时间用于日志等.\n" -"如果您不清楚，那您就不需要." - -#: ../../tinyfirewall.pm_.c:66 -msgid "" -"Configuration complete. May we write these changes to disk?\n" -"\n" -"\n" -"\n" -msgstr "" -"配置完成. 把修改写入硬盘?\n" -"\n" -"\n" -"\n" - -#: ../../tinyfirewall.pm_.c:82 -#, c-format -msgid "Can't open %s: %s\n" -msgstr "无法打开 %s: %s\n" - -#: ../../tinyfirewall.pm_.c:84 -#, c-format -msgid "Can't open %s for writing: %s\n" -msgstr "在打开 %s 写入时发生错误: %s\n" - -#: ../../tinyfirewall.pm_.c:178 -msgid "No I don't need DHCP" -msgstr "否 我不需要 DHCP" - -#: ../../tinyfirewall.pm_.c:178 -msgid "Yes I need DHCP" -msgstr "是 我需要 DHCP" - -#: ../../tinyfirewall.pm_.c:179 -msgid "No I don't need NTP" -msgstr "否 我不需要 NTP" - -#: ../../tinyfirewall.pm_.c:179 -msgid "Yes I need NTP" -msgstr "是 我需要 NTP" - -#: ../../tinyfirewall.pm_.c:180 ../../tinyfirewall.pm_.c:184 -msgid "Don't Save" -msgstr "不保存" - -#: ../../tinyfirewall.pm_.c:180 ../../tinyfirewall.pm_.c:184 -#: ../../tinyfirewall.pm_.c:204 -msgid "Save & Quit" -msgstr "保存并退出" - -#: ../../tinyfirewall.pm_.c:195 ../../tinyfirewall.pm_.c:199 -msgid "Firewall Configuration Wizard" -msgstr "防火墙配置向导" - -#: ../../tinyfirewall.pm_.c:197 -msgid "No (firewall this off from the internet)" -msgstr "不 (这个和互联网隔离)" - -#: ../../tinyfirewall.pm_.c:198 -msgid "Yes (allow this through the firewall)" -msgstr "是 (允许这个通过防火墙)" - -#: ../../tinyfirewall.pm_.c:230 -msgid "Please Wait... Verifying installed packages" -msgstr "请等候... 正在验证已安装的软件" - -#: ../../tinyfirewall.pm_.c:236 -#, c-format -msgid "" -"Failure installing the needed packages : %s and Bastille.\n" -" Try to install them manually." -msgstr "" -"未能安装需要的软件包 : %s 和 Bastille. \n" -" 尝试手工安装它们." - -#: ../../ugtk.pm_.c:619 +#: ../../ugtk.pm_.c:594 msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" @@ -12862,6 +13315,10 @@ msgstr "KDE msgid "Graphical Environment" msgstr "图形环境" +#: ../../share/compssUsers:999 +msgid "Development" +msgstr "开发平台" + #: ../../share/compssUsers:999 msgid "Apache, Pro-ftpd" msgstr "Apache和 Pro-ftpd" @@ -12970,426 +13427,128 @@ msgstr " msgid "Scientific Workstation" msgstr "科学计算工作站" -#~ msgid "\n" -#~ msgstr "\n" - -#~ msgid "$mode: $warning" -#~ msgstr "$mode: $warning" - #~ msgid "" +#~ "The first time you try the X configuration, you may not be very " +#~ "satisfied\n" +#~ "with its display (screen is too small, shifted left or right...). Hence,\n" +#~ "even if X starts up correctly, DrakX then asks you if the configuration\n" +#~ "suits you. It will also propose to change it by displaying a list of " +#~ "valid\n" +#~ "modes it could find, asking you to select one.\n" #~ "\n" -#~ "Drakbackup activities via $net_proto:\n" -#~ "\n" +#~ "As a last resort, if you still cannot get X to work, choose \"Change\n" +#~ "graphics card\", select \"Unlisted card\", and when prompted on which\n" +#~ "server, choose \"FBDev\". This is a failsafe option which works with any\n" +#~ "modern graphics card. Then choose \"Test again\" to be sure." #~ msgstr "" +#~ "自动检测的结果未必总令您满意(屏幕太小, 偏左或偏右...), 所以\n" +#~ "DrakX 会问您配置是否合适. 它还可以列出所有可用的显示模式请您选择.\n" #~ "\n" -#~ "Drakbackup 使用 $net_proto:\n" -#~ "\n" - -#~ msgid "" -#~ "This level is to be used with care. It makes your system more easy to " -#~ "use,\n" -#~ " but very sensitive: it must not be used for a machine " -#~ "connected to others\n" -#~ " or to the Internet. There is no password access." -#~ msgstr "" -#~ "这一级别应慎重使用. 它令您的系统使用更简单, 然而也更脆弱:\n" -#~ "假如这台机器将要和其他机器联网, 或者接入互联网, 绝对不要采用这个级别. 没有" -#~ "口令检查." - -#~ msgid "" -#~ "With this security level, the use of this system as a server becomes " -#~ "possible.\n" -#~ " The security is now high enough to use the system as a " -#~ "server which can accept\n" -#~ " connections from many clients. Note: if your machine is " -#~ "only a client on the Internet, you should choose a lower level." -#~ msgstr "" -#~ "推荐服务器使用这个安全级别.\n" -#~ "拥有足够的安全性, 系统可以作为服务器接受来自众多客户的连接.\n" -#~ "注意: 如果您的机器在互联网上只作为客户, 您最好选择较低的级别." - -#~ msgid "Basic Options" -#~ msgstr "基本选项" - -#~ msgid "Security Checks" -#~ msgstr "安全检查" +#~ "最后,如果 DrakX 仍然无法正确配置, 你可在\n" +#~ "\"改变图形卡\",选择\"其它卡\", 再选择\"FBDev\", \n" +#~ "这个可以保证在所有现代图形卡上工作. 选择\"重新测试\"来确认." -#~ msgid "WARNING: $warning" -#~ msgstr "警告: : $warning" +#~ msgid "Thank you for choosing Mandrake Linux 8.2" +#~ msgstr "感谢您选择 Mandrake Linux" -#~ msgid "$descr" -#~ msgstr "$descr" - -#~ msgid "Data list to include on CDROM." -#~ msgstr "光盘上要包括的文件." - -#~ msgid "Please choose your CD space" -#~ msgstr "请选择您使用的 CD 空间大小." - -#~ msgid "Please enter the cd writer speed" -#~ msgstr "请输入刻盘机速度." - -#~ msgid "Please check if you want to erase your CDRW before" -#~ msgstr "请先确认您是否要删除您的可重写光盘" - -#~ msgid "Please enter your CD Writer device name (ex: 0,1,0)" -#~ msgstr "请输入您的刻盘机的设备名 (如: 0,1,0)" - -#~ msgid "Please check if you want to include install boot on your CD." -#~ msgstr "请选择您是否要在光盘上包含安装启动" - -#~ msgid "Url should begin with 'ftp:'" -#~ msgstr "代理服务器应该是已 'ftp:'开头" +#~ msgid "Join the Free Software world" +#~ msgstr "加入自由软件的世界" #~ msgid "" -#~ "\n" -#~ "Welcome to the Printer Setup Wizard\n" -#~ "\n" -#~ "This wizard will help you to install your printer(s) connected to this " -#~ "computer.\n" -#~ "\n" -#~ "Please plug in your printer(s) on this computer and turn it/them on. " -#~ "Click on \"Next\" when you are ready, and on \"Cancel\" when you do not " -#~ "want to set up your printer(s) now.\n" -#~ "\n" -#~ "Note that some computers can crash during the printer auto-detection, " -#~ "turn off \"Auto-detect printers\" to do a printer installation without " -#~ "auto-detection. Use the \"Expert Mode\" of printerdrake when you want to " -#~ "set up printing on a remote printer if printerdrake does not list it " -#~ "automatically." -#~ msgstr "" -#~ "\n" -#~ "打印机配置精灵欢迎您\n" -#~ "\n" -#~ "这个精灵会帮助您配置连接到这个电脑的打印机.\n" -#~ "\n" -#~ "请把打印机连接到这个电脑, 并打开它的电源. 准备好后点击 \"下一步\", 如果您" -#~ "不想现在配置打印机,请点击\"取消\".\n" -#~ "\n" -#~ "注意自动检测打印机有可能使某些电脑死机,清除 \"自动检测打印机\"前面的选择方" -#~ "框可以不自动检测而安装打印机. 使用 \"专家\" 模式, 您可以设置没有检测到的远" -#~ "程打印机." - -#~ msgid "" -#~ "\n" -#~ "try to change some parameters" +#~ "Get to know the Open Source community and become a member. Learn, teach, " +#~ "and help others by joining the many discussion forums that you will find " +#~ "in our \"Community\" webpages" #~ msgstr "" -#~ "\n" -#~ "尝试改变一些参数" - -#~ msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" -#~ msgstr "8514 相容模式, 1024x768 at 87 Hz 隔行扫描 (no 800x600)" - -#~ msgid "An error occurred, try to change some parameters" -#~ msgstr "发生错误，请试着更改一些参数的值" - -#~ msgid "An error occurred:" -#~ msgstr "发生错误∶" - -#~ msgid "Auto-Detection of Printers" -#~ msgstr "自动探测打印机" - -#~ msgid "Change Graphics card" -#~ msgstr "改变显示卡" - -#~ msgid "Change Monitor" -#~ msgstr "改变显示器设定" - -#~ msgid "Change Resolution" -#~ msgstr "改变分辨率" - -#~ msgid "Change Server options" -#~ msgstr "改变服务器程序的参数" - -#~ msgid "Checking device and configuring HPOJ..." -#~ msgstr "检查设备并配置 HPOJ..." +#~ "来了解开放源码, 并成为社区的一员. 从我们的\"社区\"网页开始, 加入众多的讨论" +#~ "区和其他人一起, 互相学习, 互相帮助" -#~ msgid "Choose options for server" -#~ msgstr "请选择 X 服务器的参数" +#~ msgid "Internet and Messaging" +#~ msgstr "互联网和通信" -#~ msgid "Choose the tool you want to use" -#~ msgstr "选择您想要的工具" - -#~ msgid "Configure the way the system will alert you" -#~ msgstr "配置系统报警的方式" - -#~ msgid "Control Center" -#~ msgstr "控制中心" +#~ msgid "Multimedia and Graphics" +#~ msgstr "多媒体和图形" #~ msgid "" -#~ "Description of the fields:\n" -#~ "\n" -#~ "Bus: this is the physical bus on which the device is plugged (eg: PCI, " -#~ "USB, ...)\n" -#~ "\n" -#~ "Bus identification: \n" -#~ "- pci devices : this list the vendor, device, subvendor and subdevice PCI " -#~ "ids\n" -#~ "\n" -#~ "Description: this field describe the device\n" -#~ "\n" -#~ "Location on the bus: \n" -#~ "- pci devices: this gives the PCI slot, device and function of this card\n" -#~ "- eide devices: the device is either a slave or a master device\n" -#~ "- scsi devices: the scsi bus and the scsi device ids\n" -#~ "\n" -#~ "Media class: class of hardware device\n" -#~ "\n" -#~ "Module: the module of the GNU/Linux kernel that handle that device\n" -#~ "\n" -#~ "Vendor: the vendor name of the device\n" +#~ "Mandrake Linux 8.2 lets you push your multimedia computer to its limits! " +#~ "Use the latest software to play music and audio files, edit and organize " +#~ "your images and photos, watch TV and videos, and much more" #~ msgstr "" -#~ "各字段说明:\n" -#~ "\n" -#~ "总线: 设备所在的物理总线 (如: PCI, USB, ...)\n" -#~ "\n" -#~ "总线标识: \n" -#~ "- pci 设备 : 列出厂家, 设备, 子厂家, 子设备的 PCI 标识\n" -#~ "\n" -#~ "描述: 关于设备的说明\n" -#~ "\n" -#~ "总线上的位置: \n" -#~ "- pci 设备: 列出 PCI 插槽, 设备以及卡的功能\n" -#~ "- eide 设备: 说明设备是主设备或副设备\n" -#~ "- scsi 设备: scsi 总线和 scsi 设备编号\n" -#~ "\n" -#~ "介质类别: 硬件设备的分类\n" -#~ "\n" -#~ "模块: GNU/Linux 内核中控制此设备的模块\n" -#~ "\n" -#~ "厂家: 设备生产厂家的名称\n" - -#~ msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" -#~ msgstr "扩展 Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" +#~ "Mandrake Linux 将您的多媒体电脑推向极限! 使用最新的软件来播放音乐和音频文" +#~ "件,编辑和组织您的图像和照片, 看电视和影片, 还有更多等您来尝试" #~ msgid "" -#~ "For this to work for a W2K PDC, you will probably need to have the admin " -#~ "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" -#~ "add and reboot the server" +#~ "Mandrake Linux 8.2 is the ultimate development platform. Discover the " +#~ "power of the GNU gcc compiler as well as the best Open Source development " +#~ "environments" #~ msgstr "" -#~ "在 Windows2000 域主控服务器, 您可能需要以管理员权限运行下列命令:\n" -#~ "C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add并" -#~ "重新起动服务器" - -#~ msgid "Graphics card identification: %s\n" -#~ msgstr "显示卡: %s\n" - -#~ msgid "Graphics card not configured yet" -#~ msgstr "尚未完成显示卡设定" - -#~ msgid "High Frequency SVGA, 1024x768 at 70 Hz" -#~ msgstr "高频率 SVGA, 1024x768 at 70 Hz" +#~ "Mandrake Linux 是最终的开发平台. 来发现 GNU gcc 编译器的强大力量还有最棒" +#~ "的开放源码开发环境" #~ msgid "" -#~ "If you wish to install less than this size,\n" -#~ "select the percentage of packages that you want to install.\n" -#~ "\n" -#~ "A low percentage will install only the most important packages;\n" -#~ "a percentage of 100%% will install all selected packages." -#~ msgstr "" -#~ "如果您想使用更少的空间来安装, \n" -#~ "请决定安装已经选定的软件包的百分比?\n" -#~ "\n" -#~ "选择较低的百分比就只安装最重要的软件; 选择 100 %% 就安装所选的\n" -#~ "全部软件." - -#~ msgid "Installing HPOJ package..." -#~ msgstr "正在安装 HPOJ 程序 ..." - -#~ msgid "Installing SANE package..." -#~ msgstr "正在安装 SANE 程序..." - -#~ msgid "Is this the correct setting?" -#~ msgstr "这样设定正确吗?" +#~ "The Mandrake Linux 8.2 Control Center is a one-stop location for fully " +#~ "customizing and configuring your Mandrake system" +#~ msgstr "Mandrake Linux 控制中心让您从一个界面配置 Mandrake 系统的方方面面." #~ msgid "" -#~ "Is your printer a multi-function device from HP (OfficeJet, PSC, LaserJet " -#~ "1100/1200/1220/3200/3300 with scanner), an HP PhotoSmart P100 or 1315 or " -#~ "an HP LaserJet 2200?" +#~ "Mandrake Linux 8.2 provides 11 different graphical desktop environments " +#~ "and window managers to choose from including GNOME 1.4, KDE 2.2.2, Window " +#~ "Maker 0.8, and the rest" #~ msgstr "" -#~ "您的打印机是不是 HP惠普的多功能打印设备 (OfficeJet, PSC, 带有扫描仪的" -#~ "LaserJet 1100/1200/1220/3200/3300), HP PhotoSmart P100 或 1315 或者 HP " -#~ "LaserJet 2200?" - -#~ msgid "Leaving in %d seconds" -#~ msgstr "(在 %d 秒钟后离开)" - -#~ msgid "Making printer port available for CUPS..." -#~ msgstr "为 CUPS 设置打印机端口..." - -#~ msgid "Monitor not configured" -#~ msgstr "尚未完成显示器设定" +#~ "Mandrake Linux 提供了 11 种不同的图形桌面环境和窗口管理程序, 任您选择其中" +#~ "包括 GNOME, KDE, Window Maker, 等等" -#~ msgid "Monitor that can do 1600x1200 at 70 Hz" -#~ msgstr "您的显示器可使用 1600x1200 at 70 Hz" - -#~ msgid "Monitor that can do 1600x1200 at 76 Hz" -#~ msgstr "您的显示器可使用 1600x1200 at 76 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 60 Hz" -#~ msgstr "多频率, 最高达 1280x1024 at 60 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 74 Hz" -#~ msgstr "多频率, 最高达 1280x1024 at 74 Hz" - -#~ msgid "Multi-frequency that can do 1280x1024 at 76 Hz" -#~ msgstr "多频率, 最高达 1280x1024 at 76 Hz" +#~ msgid "Server Software" +#~ msgstr "服务器软件" #~ msgid "" -#~ "Network printers can only be installed after the installation. Choose " -#~ "\"Hardware\" and then \"Printer\" in the Mandrake Control Center." +#~ "Mandrake Linux 8.2 provides the best Open Source games - arcade, action, " +#~ "cards, sports, strategy, ..." #~ msgstr "" -#~ "只有系统安装之后才能安装网络打印机. 在 Mandrake 控制中心选择\"硬件\" 然后" -#~ "选择 \"打印机\"." - -#~ msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" -#~ msgstr "逐行扫描 SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" +#~ "Mandrake Linux 包括了最好的开放源码游戏 -闯关, 动作, 纸牌, 策略, ..." -#~ msgid "PDC Server Name" -#~ msgstr "域主控服务器名" - -#~ msgid "Package List to Install" -#~ msgstr "选择要安装的软件包" - -#~ msgid "Percentage of packages to install" -#~ msgstr "要安装软件包的百分比" +#~ msgid "MandrakeCampus" +#~ msgstr "Mandrake校园" #~ msgid "" -#~ "Please check if you want to include\n" -#~ " install boot on your CD." +#~ "Would you like to learn Linux simply, quickly, and for free? MandrakeSoft " +#~ "provides free Linux training, as well as a way to test your progress, at " +#~ "MandrakeCampus -- our online training center" #~ msgstr "" -#~ "请选中这里, 如果您希望制作启动光盘\n" -#~ "该光盘可自启动." - -#~ msgid "Preparing X-Window configuration" -#~ msgstr "正在准备 X-Window 的设定" +#~ "怎样简单, 快捷, 又省钱的学习 Linxu? MandrakeSoft 提供免费的 Linux 培训, 以" +#~ "及测试您自己进步的办法, 就在 Mandrake校园 -- 我们的在线培训中心" #~ msgid "" -#~ "Printerdrake is able to auto-detect your locally connected parallel and " -#~ "USB printers for you, but note that on some systems the auto-detection " -#~ "CAN FREEZE YOUR SYSTEM AND THIS CAN LEAD TO CORRUPTED FILE SYSTEMS! So do " -#~ "it ON YOUR OWN RISK!\n" -#~ "\n" -#~ "Do you really want to get your printers auto-detected?" +#~ "Quality support from the Linux Community, and from MandrakeSoft, is just " +#~ "around the corner. And if you're already a Linux veteran, become an " +#~ "\"Expert\" and share your knowledge at our support website" #~ msgstr "" -#~ "自动检测有锁死您的系统的风险,\n" -#~ "继续自动检测并行口和 USB 端口的打印机?" - -#~ msgid "Resolutions not chosen yet" -#~ msgstr "尚未选取要使用的分辨率" - -#~ msgid "Scanning on your HP multi-function device" -#~ msgstr "查找您的 HP 多功能设备" - -#~ msgid "Select a graphics card" -#~ msgstr "请选择一种显示卡" - -#~ msgid "Set up printer manually" -#~ msgstr "手工设置打印机" - -#~ msgid "Setting security level" -#~ msgstr "设定安全级别" - -#~ msgid "Show all" -#~ msgstr "显示全部" - -#~ msgid "Show information" -#~ msgstr "显示所有信息" - -#~ msgid "Standard VGA, 640x480 at 60 Hz" -#~ msgstr "标准 VGA 模式, 640x480 at 60 Hz" - -#~ msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" -#~ msgstr "Super VGA, 1024x768 at 87 Hz 隔行扫描, 800x600 at 56 Hz" - -#~ msgid "Super VGA, 800x600 at 56 Hz" -#~ msgstr "Super VGA, 800x600 at 56 Hz" - -#~ msgid "Tamil" -#~ msgstr "坦米尔" +#~ "来自 Linux 社区的优质支持服务, 近在咫尺的 Mandrake专家 -- 我们的在线支持中" +#~ "心.如果您精通 Linux, 您就是我们的\"专家\", 请来这里分享您的经验." -#~ msgid "Test again" -#~ msgstr "再次测试设定值" +#~ msgid "MandrakeConsulting" +#~ msgstr "Mandrake顾问" #~ msgid "" -#~ "The total size for the groups you have selected is approximately %d MB.\n" -#~ msgstr "被选择的组件安装所需硬盘空间约为 %d MB.\n" - -#~ msgid "" -#~ "To install network printers, click \"Cancel\", switch to the \"Expert Mode" -#~ "\", and click \"Add a new printer\" again." +#~ "For all of your IT projects, our consultants are ready to analyze your " +#~ "requirements and offer a customized solution. Benefit from MandrakeSoft's " +#~ "vast experience as a Linux producer to provide a true IT alternative for " +#~ "your business organization" #~ msgstr "" -#~ "要安装网络打印机, 点击 \"取消\", 变换到 \"专家模式\", 然后再次点击 \"添加" -#~ "新打印机\"." - -#~ msgid "Use FTP with daemon" -#~ msgstr "使用 FTP" - -#~ msgid "Use Hard Drive with daemon" -#~ msgstr "使用硬盘" - -#~ msgid "Warning: testing this graphics card may freeze your computer" -#~ msgstr "小心! 显示卡的测试可能会锁定您的电脑" +#~ "我们的顾问队伍随时准备帮助您, 分析需求并实现您的 IT 项目.MandrakeSoft 作" +#~ "为 Linux 提供商所积累的成功经验, 必将为您的企业提供更好的 IT 解决方案" -#~ msgid "What do you want to do?" -#~ msgstr "您打算怎么作 ?" - -#~ msgid "Windows PDC" -#~ msgstr "Windows 域主控服务器" - -#~ msgid "XFree86 server: %s" -#~ msgstr "XFree86 服务器: %s" +#~ msgid "MandrakeStore" +#~ msgstr "Mandrake商场" #~ msgid "" -#~ "You have space on your disk for only %d%% of these packages.\n" -#~ "\n" -#~ "If you wish to install less than this,\n" -#~ "select the percentage of packages that you want to install.\n" -#~ "A low percentage will install only the most important packages;\n" -#~ "a percentage of %d%% will install as many packages as possible." -#~ msgstr "" -#~ "您的磁盘空间只够安装所有这些软件包的 %d%%.\n" -#~ "如果您想少安装一些, \n" -#~ "请决定安装已经选定的软件包的百分之几?\n" -#~ "\n" -#~ "选择较低的百分比就只安装最重要的软件; 选择 %d%% 就安装所选的\n" -#~ "全部软件." - -#~ msgid "You will be able to choose them more specifically in the next step." -#~ msgstr "在下一个步骤您将可以更仔细的选择" +#~ "A full range of Linux solutions, as well as special offers on products " +#~ "and 'goodies', are available online at our e-store" +#~ msgstr "全套的 Linux 产品和服务, 各种特供产品和玩意儿, 就在我们的在线商场" #~ msgid "" -#~ "Your HP multi-function device was configured automatically to be able to " -#~ "scan. Now you can scan from the command line with \"ptal-hp %s scan ..." -#~ "\". Scanning via a graphical interface or from the GIMP is not supported " -#~ "yet for your device. More information you will find in the \"/usr/share/" -#~ "doc/hpoj-0.8/ptal-hp-scan.html\" file on your system. If you have an HP " -#~ "LaserJet 1100 or 1200 you can only scan when you have the scanner option " -#~ "installed.\n" -#~ "\n" -#~ "Do not use \"scannerdrake\" for this device!" -#~ msgstr "" -#~ "您的 HP 多功能设备已经被自动设置成可以扫描.您现在可以运行命令 \"ptal-hp %" -#~ "s scan ...\". 您的设备目前无法从图形界面或者 GIMP 内进行扫描. 要了解更多信" -#~ "息请查看您系统的 \"/usr/share/doc/hpoj-0.8/ptal-hp-scan.html\" 文件. 如果" -#~ "您有 HP LaserJet 1100 或 1200 只有安装了扫描仪组件时才能扫描.\n" -#~ "\n" -#~ "不要对这个设备运行\"scannerdrake\"!" - -#~ msgid "fsck failed with exit code %d or signal %d" -#~ msgstr "fsck 失败, 退出码 %d 或 信号 %d" - -#~ msgid "no serial_usb found\n" -#~ msgstr "找不到 serial_usb\n" - -#~ msgid "proftpd" -#~ msgstr "proftpd" - -#~ msgid "sshd" -#~ msgstr "sshd" - -#~ msgid "webmin" -#~ msgstr "webmin" +#~ "For more information on MandrakeSoft's Professional Services and " +#~ "commercial offerings, please see the following web page:" +#~ msgstr "要更多了解 MandrakeSoft 的专业服务和合作机会, 请到下列网页:" -#~ msgid "xinetd" -#~ msgstr "xinetd" +#~ msgid "http://www.mandrakesoft.com/sales/contact" +#~ msgstr "http://www.mandrakesoft.com/sales/contact" -- cgit v1.2.1