From 5521ae98ce86e69166df6f72126bf0c300c069f4 Mon Sep 17 00:00:00 2001 From: Pascal Rigaux Date: Wed, 13 Oct 1999 11:06:12 +0000 Subject: no_comment --- perl-install/share/po/DrakX.pot | 2310 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 2310 insertions(+) create mode 100644 perl-install/share/po/DrakX.pot (limited to 'perl-install') diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot new file mode 100644 index 000000000..9ecc97e38 --- /dev/null +++ b/perl-install/share/po/DrakX.pot @@ -0,0 +1,2310 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Free Software Foundation, Inc. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"POT-Creation-Date: 1999-10-13 00:04+0200\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: ENCODING\n" + +#: ../Xconfigurator.pm_.c:164 +msgid "Select a graphic card" +msgstr "" + +#: ../Xconfigurator.pm_.c:165 +msgid "Choose a X server" +msgstr "" + +#: ../Xconfigurator.pm_.c:184 +msgid "Select the memory size of your graphic card" +msgstr "" + +#: ../Xconfigurator.pm_.c:197 +msgid "Choose a monitor" +msgstr "" + +#: ../Xconfigurator.pm_.c:200 +msgid "" +"The two critical parameters are the vertical refresh rate, which is the " +"rate\n" +"at which the whole screen is refreshed, and most importantly the horizontal\n" +"sync rate, which is the rate at which scanlines are displayed.\n" +"\n" +"It is VERY IMPORTANT that you do not specify a monitor type with a sync " +"range\n" +"that is beyond the capabilities of your monitor: you may damage your " +"monitor.\n" +" If in doubt, choose a conservative setting." +msgstr "" + +#: ../Xconfigurator.pm_.c:207 +msgid "Horizontal refresh rate" +msgstr "" + +#: ../Xconfigurator.pm_.c:207 +msgid "Vertical refresh rate" +msgstr "" + +#: ../Xconfigurator.pm_.c:246 +msgid "Monitor not configured" +msgstr "" + +#: ../Xconfigurator.pm_.c:249 +msgid "Graphic card not configured yet" +msgstr "" + +#: ../Xconfigurator.pm_.c:252 +msgid "Resolutions not chosen yet" +msgstr "" + +#: ../Xconfigurator.pm_.c:259 +msgid "Do you want to test the configuration?" +msgstr "" + +#: ../Xconfigurator.pm_.c:259 +msgid "Test configuration" +msgstr "" + +#: ../Xconfigurator.pm_.c:289 +msgid "An error occurred:" +msgstr "" + +#: ../Xconfigurator.pm_.c:291 +msgid "" +"\n" +"try changing some parameters" +msgstr "" + +#: ../Xconfigurator.pm_.c:312 +#, c-format +msgid "(leaving in %d seconds)" +msgstr "" + +#: ../Xconfigurator.pm_.c:316 ../my_gtk.pm_.c:348 +msgid "Is this correct?" +msgstr "" + +#: ../Xconfigurator.pm_.c:324 +msgid "An error occurred, try changing some parameters" +msgstr "" + +#: ../Xconfigurator.pm_.c:332 ../Xconfigurator.pm_.c:481 +msgid "Automatic resolutions" +msgstr "" + +#: ../Xconfigurator.pm_.c:333 +msgid "" +"To find the available resolutions I will try different ones.\n" +"Your screen will blink...\n" +"You can switch if off if you want, you'll hear a beep when it's over" +msgstr "" + +#: ../Xconfigurator.pm_.c:380 ../install_steps_interactive.pm_.c:450 +#: ../install_steps_interactive.pm_.c:451 +msgid "Resolution" +msgstr "" + +#: ../Xconfigurator.pm_.c:414 +msgid "Choose resolution and color depth" +msgstr "" + +#: ../Xconfigurator.pm_.c:422 +msgid "Show all" +msgstr "" + +#: ../Xconfigurator.pm_.c:482 +msgid "" +"I can try to find the available resolutions (eg: 800x600).\n" +"Sometimes, though, it may hang the machine.\n" +"Do you want to try?" +msgstr "" + +#: ../Xconfigurator.pm_.c:487 +msgid "" +"No valid modes found\n" +"Try with another video card or monitor" +msgstr "" + +#: ../Xconfigurator.pm_.c:672 +#, c-format +msgid "Keyboard layout: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:673 +#, c-format +msgid "Mouse type: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:674 +#, c-format +msgid "Mouse device: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:675 +#, c-format +msgid "Monitor: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:676 +#, c-format +msgid "Monitor HorizSync: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:677 +#, c-format +msgid "Monitor VertRefresh: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:678 +#, c-format +msgid "Graphic card: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:679 +#, c-format +msgid "Graphic memory: %s kB\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:680 +#, c-format +msgid "XFree86 server: %s\n" +msgstr "" + +#: ../Xconfigurator.pm_.c:705 +msgid "Change Monitor" +msgstr "" + +#: ../Xconfigurator.pm_.c:706 +msgid "Change Graphic card" +msgstr "" + +#: ../Xconfigurator.pm_.c:707 +msgid "Change Resolution" +msgstr "" + +#: ../Xconfigurator.pm_.c:708 +msgid "Automatical resolutions search" +msgstr "" + +#: ../Xconfigurator.pm_.c:712 +msgid "Show information" +msgstr "" + +#: ../Xconfigurator.pm_.c:713 +msgid "Test again" +msgstr "" + +#: ../Xconfigurator.pm_.c:714 +msgid "Quit" +msgstr "" + +#: ../Xconfigurator.pm_.c:717 +msgid "What do you want to do?" +msgstr "" + +#: ../Xconfigurator.pm_.c:722 +msgid "X at startup" +msgstr "" + +#: ../Xconfigurator.pm_.c:723 +msgid "" +"I can set up your computer to automatically start X upon booting.\n" +"Would you like X to start when you reboot?" +msgstr "" + +#: ../Xconfigurator.pm_.c:728 +msgid "X successfully configured" +msgstr "" + +#: ../Xconfigurator.pm_.c:729 +msgid "" +"Configuration file has been written. Take a look at it before running " +"'startx'.\n" +"Within the server, press Ctrl, Alt and '+' simultaneously to cycle through " +"video resolutions.\n" +"Pressing Ctrl, Alt and Backspace simultaneously immediately exits the " +"server\n" +"For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config." +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:4 +msgid "256 colors" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:5 +msgid "32 thousand colors" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:6 +msgid "65 thousand colors" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:7 +msgid "16 million colors" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:8 +msgid "4 billion colors" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:57 +msgid "256 kB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:58 +msgid "512 kB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:59 +msgid "1 MB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:60 +msgid "2 MB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:61 +msgid "4 MB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:62 +msgid "8 MB" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:63 +msgid "16 MB or more" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:67 ../Xconfigurator_consts.pm_.c:68 +msgid "Standard VGA, 640x480 at 60 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:69 +msgid "Super VGA, 800x600 at 56 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:70 +msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:71 +msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:72 +msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:73 +msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:74 +msgid "High Frequency SVGA, 1024x768 at 70 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:75 +msgid "Multi-frequency that can do 1280x1024 at 60 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:76 +msgid "Multi-frequency that can do 1280x1024 at 74 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:77 +msgid "Multi-frequency that can do 1280x1024 at 76 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:78 +msgid "Monitor that can do 1600x1200 at 70 Hz" +msgstr "" + +#: ../Xconfigurator_consts.pm_.c:79 +msgid "Monitor that can do 1600x1200 at 76 Hz" +msgstr "" + +#: ../diskdrake.pm_.c:15 +msgid "Create" +msgstr "" + +#: ../diskdrake.pm_.c:16 +msgid "Unmount" +msgstr "" + +#: ../diskdrake.pm_.c:17 +msgid "Delete" +msgstr "" + +#: ../diskdrake.pm_.c:17 +msgid "Format" +msgstr "" + +#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:376 +msgid "Move" +msgstr "" + +#: ../diskdrake.pm_.c:17 ../diskdrake.pm_.c:434 +msgid "Resize" +msgstr "" + +#: ../diskdrake.pm_.c:17 +msgid "Type" +msgstr "" + +#: ../diskdrake.pm_.c:18 +msgid "Mount_point" +msgstr "" + +#: ../diskdrake.pm_.c:32 +msgid "Write /etc/fstab" +msgstr "" + +#: ../diskdrake.pm_.c:33 +msgid "Normal > Expert" +msgstr "" + +#: ../diskdrake.pm_.c:34 +msgid "Expert > Normal" +msgstr "" + +#: ../diskdrake.pm_.c:35 +msgid "Restore from file" +msgstr "" + +#: ../diskdrake.pm_.c:36 +msgid "Save in file" +msgstr "" + +#: ../diskdrake.pm_.c:37 +msgid "Restore from floppy" +msgstr "" + +#: ../diskdrake.pm_.c:38 +msgid "Save on floppy" +msgstr "" + +#: ../diskdrake.pm_.c:39 ../install_steps_interactive.pm_.c:533 +#: ../install_steps_interactive.pm_.c:642 +msgid "Done" +msgstr "" + +#: ../diskdrake.pm_.c:42 +msgid "Clear all" +msgstr "" + +#: ../diskdrake.pm_.c:43 +msgid "Format all" +msgstr "" + +#: ../diskdrake.pm_.c:44 +msgid "Auto allocate" +msgstr "" + +#: ../diskdrake.pm_.c:47 +msgid "All primary partitions are used" +msgstr "" + +#: ../diskdrake.pm_.c:47 +msgid "I can't add any more partition" +msgstr "" + +#: ../diskdrake.pm_.c:47 +msgid "" +"To have more partitions, please delete one to be able to create an extended " +"partition" +msgstr "" + +#: ../diskdrake.pm_.c:50 +msgid "Rescue partition table" +msgstr "" + +#: ../diskdrake.pm_.c:51 +msgid "Undo" +msgstr "" + +#: ../diskdrake.pm_.c:52 +msgid "Write partition table" +msgstr "" + +#: ../diskdrake.pm_.c:94 +msgid "Details" +msgstr "" + +#: ../diskdrake.pm_.c:98 +msgid "Legend" +msgstr "" + +#: ../diskdrake.pm_.c:100 +msgid "Empty" +msgstr "" + +#: ../diskdrake.pm_.c:100 +msgid "Ext2" +msgstr "" + +#: ../diskdrake.pm_.c:100 +msgid "FAT" +msgstr "" + +#: ../diskdrake.pm_.c:100 +msgid "Other" +msgstr "" + +#: ../diskdrake.pm_.c:100 +msgid "Swap" +msgstr "" + +#: ../diskdrake.pm_.c:120 +#, c-format +msgid "After %s partition %s," +msgstr "" + +#: ../diskdrake.pm_.c:120 ../diskdrake.pm_.c:367 ../diskdrake.pm_.c:394 +msgid "Read carefully!" +msgstr "" + +#: ../diskdrake.pm_.c:120 +msgid "all data on this partition will be lost" +msgstr "" + +#: ../diskdrake.pm_.c:138 ../install_any.pm_.c:177 ../install_steps.pm_.c:67 +#: ../install_steps_interactive.pm_.c:37 +msgid "Error" +msgstr "" + +#: ../diskdrake.pm_.c:159 ../diskdrake.pm_.c:511 +msgid "Mount point: " +msgstr "" + +#: ../diskdrake.pm_.c:160 ../diskdrake.pm_.c:182 +msgid "Device: " +msgstr "" + +#: ../diskdrake.pm_.c:161 +#, c-format +msgid "DOS drive letter: %s (just a guess)\n" +msgstr "" + +#: ../diskdrake.pm_.c:162 ../diskdrake.pm_.c:185 +msgid "Type: " +msgstr "" + +#: ../diskdrake.pm_.c:163 +#, c-format +msgid "Start: sector /*%s\n" +msgstr "" + +#: ../diskdrake.pm_.c:164 +msgid "Size: %s MB (%s%%)" +msgstr "" + +#: ../diskdrake.pm_.c:165 +#, c-format +msgid ", %s sectors" +msgstr "" + +#: ../diskdrake.pm_.c:167 +#, c-format +msgid "Cylinder %d to cylinder %d\n" +msgstr "" + +#: ../diskdrake.pm_.c:168 +msgid "Formatted\n" +msgstr "" + +#: ../diskdrake.pm_.c:169 +msgid "Not formatted\n" +msgstr "" + +#: ../diskdrake.pm_.c:170 +msgid "Mounted\n" +msgstr "" + +#: ../diskdrake.pm_.c:171 +msgid "" +"Partition booted by default\n" +" (for MS-DOS boot, not for lilo)\n" +msgstr "" + +#: ../diskdrake.pm_.c:183 +#, c-format +msgid "Size: %d MB\n" +msgstr "" + +#: ../diskdrake.pm_.c:184 +#, c-format +msgid "Geometry: %s cylinders, %s heads, %s sectors\n" +msgstr "" + +#: ../diskdrake.pm_.c:186 +#, c-format +msgid "on bus %d id %d\n" +msgstr "" + +#: ../diskdrake.pm_.c:198 +msgid "Mount" +msgstr "" + +#: ../diskdrake.pm_.c:200 +msgid "Active" +msgstr "" + +#: ../diskdrake.pm_.c:289 +msgid "" +"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " +"1024).\n" +"Either you use LILO and it won't work, or you don't use LILO and you don't " +"need /boot" +msgstr "" + +#: ../diskdrake.pm_.c:293 +msgid "" +"The partition you've selected to add as root (/) is physically located " +"beyond\n" +"the 1024th cylinder of the hard drive, and you have no /boot partition.\n" +"If you plan to use the LILO boot manager, be careful to add a /boot partition" +msgstr "" + +#: ../diskdrake.pm_.c:307 +msgid "Quit without saving" +msgstr "" + +#: ../diskdrake.pm_.c:307 +msgid "Quit without writing the partition table?" +msgstr "" + +#: ../diskdrake.pm_.c:322 +msgid "changing type of" +msgstr "" + +#: ../diskdrake.pm_.c:324 +msgid "Change partition type" +msgstr "" + +#: ../diskdrake.pm_.c:325 +msgid "Which partition type do you want?" +msgstr "" + +#: ../diskdrake.pm_.c:339 +#, c-format +msgid "Where do you want to mount device %s?" +msgstr "" + +#: ../diskdrake.pm_.c:340 +msgid "Mount point" +msgstr "" + +#: ../diskdrake.pm_.c:361 +msgid "formatting" +msgstr "" + +#: ../diskdrake.pm_.c:367 +msgid "After formatting all partitions," +msgstr "" + +#: ../diskdrake.pm_.c:367 +msgid "all data on these partitions will be lost" +msgstr "" + +#: ../diskdrake.pm_.c:377 +msgid "Which disk do you want to move to?" +msgstr "" + +#: ../diskdrake.pm_.c:381 +msgid "Sector" +msgstr "" + +#: ../diskdrake.pm_.c:382 +msgid "Which sector do you want to move to?" +msgstr "" + +#: ../diskdrake.pm_.c:385 +msgid "Moving" +msgstr "" + +#: ../diskdrake.pm_.c:385 +msgid "Moving partition..." +msgstr "" + +#: ../diskdrake.pm_.c:394 +#, c-format +msgid "Partition table of drive %s is going to be written to disk!" +msgstr "" + +#: ../diskdrake.pm_.c:396 +msgid "You'll need to reboot before the modification can take place" +msgstr "" + +#: ../diskdrake.pm_.c:417 +msgid "Computing fat filesystem bounds" +msgstr "" + +#: ../diskdrake.pm_.c:417 ../diskdrake.pm_.c:462 +msgid "Resizing" +msgstr "" + +#: ../diskdrake.pm_.c:431 +msgid "resizing" +msgstr "" + +#: ../diskdrake.pm_.c:441 +msgid "Choose the new size" +msgstr "" + +#: ../diskdrake.pm_.c:441 ../install_steps_graphical.pm_.c:303 +msgid "MB" +msgstr "" + +#: ../diskdrake.pm_.c:488 +msgid "Create a new partition" +msgstr "" + +#: ../diskdrake.pm_.c:504 +msgid "Start sector: " +msgstr "" + +#: ../diskdrake.pm_.c:507 +msgid "Size in MB: " +msgstr "" + +#: ../diskdrake.pm_.c:510 +msgid "Filesystem type: " +msgstr "" + +#: ../diskdrake.pm_.c:512 +msgid "Preference: " +msgstr "" + +#: ../diskdrake.pm_.c:554 ../diskdrake.pm_.c:570 +msgid "Select file" +msgstr "" + +#: ../diskdrake.pm_.c:563 +msgid "" +"The backup partition table has not the same size\n" +"Still continue?" +msgstr "" + +#: ../diskdrake.pm_.c:571 +msgid "Warning" +msgstr "" + +#: ../diskdrake.pm_.c:572 +msgid "" +"Insert a floppy in drive\n" +"All data on this floppy will be lost" +msgstr "" + +#: ../diskdrake.pm_.c:586 +msgid "Trying to rescue partition table" +msgstr "" + +#: ../fs.pm_.c:67 ../fs.pm_.c:73 +#, c-format +msgid "%s formatting of %s failed" +msgstr "" + +#: ../fs.pm_.c:92 +#, c-format +msgid "don't know how to format %s in type %s" +msgstr "" + +#: ../fs.pm_.c:105 +msgid "nfs mount failed" +msgstr "" + +#: ../fs.pm_.c:122 +msgid "mount failed: " +msgstr "" + +#: ../fs.pm_.c:133 +#, c-format +msgid "error unmounting %s: %s" +msgstr "" + +#: ../fsedit.pm_.c:162 +msgid "Mount points must begin with a leading /" +msgstr "" + +#: ../fsedit.pm_.c:165 +#, c-format +msgid "There is already a partition with mount point %s" +msgstr "" + +#: ../fsedit.pm_.c:294 +#, c-format +msgid "Error opening %s for writing: %s" +msgstr "" + +#: ../fsedit.pm_.c:363 +msgid "" +"An error has occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" +msgstr "" + +#: ../fsedit.pm_.c:378 +msgid "You don't have any partitions!" +msgstr "" + +#: ../help.pm_.c:7 ../help.pm_.c:238 +msgid "Choose preferred language for install and system usage." +msgstr "" + +#: ../help.pm_.c:10 ../help.pm_.c:241 +msgid "Choose the layout corresponding to your keyboard from the list above" +msgstr "" + +#: ../help.pm_.c:13 ../help.pm_.c:244 +msgid "" +"Choose \"Installation\" if there are no previous versions of Linux\n" +"installed, or if you wish use to multiple distributions or versions.\n" +"\n" +"\n" +"Choose \"Update\" if you wish to update a previous version of Mandrake\n" +"Linux: 5.1 (Venice), 5.2 (Leeloo), 5.3 (Festen) or 6.0 (Venus)." +msgstr "" + +#: ../help.pm_.c:21 ../help.pm_.c:252 +msgid "" +"Select:\n" +"\n" +" - Beginner: If you have never installed Linux before, and wish to\n" +"install the distribution elected \"Product of the year\" for 1999,\n" +"click here.\n" +"\n" +" - Developer: If you are familiar with Linux and will be using the\n" +"computer primarily for software development, you will find happiness\n" +"here.\n" +"\n" +" - Server: If you wish to install a general purpose server, or the\n" +"Linux distribution elected \"Distribution/Server\" for 1999, select\n" +"this.\n" +"\n" +" - Expert: If you are fluent with GNU/Linux and want to perform\n" +"a highly customized installation, this Install Class is for you." +msgstr "" + +#: ../help.pm_.c:39 ../help.pm_.c:270 +msgid "" +"DrakX will attempt at first to look for one or more PCI\n" +"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" +"to use, it will insert it (them) automatically.\n" +"\n" +"If your SCSI adapter is ISA, or is PCI but DrakX doesn't know\n" +"which driver to use for this card, or if you have no SCSI adapters\n" +"at all, you will then be prompted on whether you have one or not.\n" +"If you have none, answer \"No\". If you have one or more, answer\n" +"\"Yes\". A list of drivers will then pop up, from which you will\n" +"have to select one.\n" +"\n" +"After you have selected the driver, DrakX will ask if you\n" +"want to specify options for it. First, try and let the driver\n" +"probe for the hardware: it usually works fine.\n" +"\n" +"If not, do not forget the information on your hardware that you\n" +"could get from Windows (if you have it on your system), as\n" +"suggested by the installation guide. These are the options\n" +"you will need to provide to the driver." +msgstr "" + +#: ../help.pm_.c:60 ../help.pm_.c:291 +msgid "" +"At this point, hard drive partitions must be defined. (Unless you\n" +"are overwriting a previous install of Linux and have already defined\n" +"your hard drive partitions as desired.) This operation consists of\n" +"logically dividing the computer's hard drive capacity into separate\n" +"areas for use.\n" +"\n" +"\n" +"Two common partition are: the root partition (/), which is the starting\n" +"point of the filesystem's directory hierarchy, and /boot, which contains\n" +"all files necessary to start the operating system when the\n" +"computer is first turned on.\n" +"\n" +"\n" +"Because the effects of this process are usually irreversible, partitioning\n" +"can be intimidating and stressful to the unexperienced. DiskDrake\n" +"simplifies the process so that it need not be. Consult the documentation\n" +"and take your time before proceeding." +msgstr "" + +#: ../help.pm_.c:79 ../help.pm_.c:310 +msgid "" +"Any partitions that have been newly defined must be formatted for\n" +"use (formatting meaning creating a filesystem). At this time, you may\n" +"wish to re-format some already existing partitions to erase the data\n" +"they contain. Note: it is not necessary to re-format pre-existing\n" +"partitions, particularly if they contain files or data you wish to keep.\n" +"Typically retained are /home and /usr/local." +msgstr "" + +#: ../help.pm_.c:87 ../help.pm_.c:318 +msgid "" +"You may now select the packages you wish to install.\n" +"\n" +"\n" +"Please note that some packages require the installation of others.\n" +"These are referred to as package dependencies. The packages you select,\n" +"and the packages they require will be automatically selected for\n" +"install. It is impossible to install a package without installing all\n" +"of its dependencies.\n" +"\n" +"\n" +"Information on each category and specific package is available in the\n" +"area titled \"Info\", located between list of packages and the five\n" +"buttons \"Go\", \"Select more/less\" and \"Show more/less\"." +msgstr "" + +#: ../help.pm_.c:102 ../help.pm_.c:333 +msgid "" +"The packages selected are now being installed. This operation\n" +"should only take a few minutes." +msgstr "" + +#: ../help.pm_.c:106 ../help.pm_.c:337 +msgid "" +"If DrakX failed to find your mouse, or if you want to\n" +"check what it has done, you will be presented the list of mice\n" +"above.\n" +"\n" +"\n" +"If you agree with DrakX' settings, just jump to the section\n" +"you want by clicking on it in the menu on the left. Otherwise,\n" +"choose a mouse type in the menu which you think is the closest\n" +"match for your mouse.\n" +"\n" +"In case of a serial mouse, you will also have to tell DrakX\n" +"which serial port it is connected to." +msgstr "" + +#: ../help.pm_.c:120 ../help.pm_.c:351 +msgid "" +"This section is dedicated to configuring a local area network,\n" +"or LAN. If you answer \"Yes\" here, DrakX will try to find an\n" +"Ethernet adapter on your machine. PCI adapters should be found and\n" +"initialized automatically. However, if your peripheral is ISA,\n" +"autodetection will not work, and you will have to choose a driver\n" +"from the list that will appear then.\n" +"\n" +"\n" +"As for SCSI adapters, you can let the driver probe for the adapter\n" +"in the first time, otherwise you will have to specify the options\n" +"to the driver that you will have fetched from Windows' control\n" +"panel.\n" +"\n" +"\n" +"If you install a Linux-Mandrake system on a machine which is part\n" +"of an already existing network, the network administrator will\n" +"have given you all necessary information (IP address, network\n" +"submask or netmask for short, and hostname). If you're setting\n" +"up a private network at home for example, you should choose\n" +"addresses " +msgstr "" + +#: ../help.pm_.c:142 ../help.pm_.c:145 ../help.pm_.c:232 ../help.pm_.c:373 +#: ../help.pm_.c:376 ../help.pm_.c:463 ../install2.pm_.c:65 +msgid "Help" +msgstr "" + +#: ../help.pm_.c:148 +msgid "" +"Linux can deal with many types of printer. Each of these\n" +"types require a different setup.\n" +"\n" +"\n" +"If your printer is directly connected to your computer, select\n" +"\"Local printer\". You will then have to tell which port your\n" +"printer is connected to, and select the appropriate filter.\n" +"\n" +"\n" +"If you want to access a printer located on a remote Unix machine,\n" +"you will have to select \"Remote lpd queue\". In order to make\n" +"it work, no username or password is required, but you will need\n" +"to know the name of the printing queue on this server.\n" +"\n" +"\n" +"If you want to access a SMB printer (which means, a printer located\n" +"on a remote Windows 9x/NT machine), you will have to specify its\n" +"SMB name (which is not its TCP/IP name), and possibly its IP address,\n" +"plus the username, workgroup and password required in order to\n" +"access the printer, and of course the name of the printer. The same goes\n" +"for a NetWare printer, except that you need no workgroup information." +msgstr "" + +#: ../help.pm_.c:171 ../help.pm_.c:402 +msgid "" +"You must now enter the root password for your Linux-Mandrake\n" +"system. The password must be entered twice to verify that both\n" +"password entries are identical.\n" +"\n" +"\n" +"Root is the administrator of the system, and is the only user\n" +"allowed to modify the system configuration. Therefore, choose\n" +"this password carefully! Unauthorized use of the root account can\n" +"be extremely dangerous to the integrity of the system and its data,\n" +"and other systems connected to it. The password should be a\n" +"mixture of alphanumeric characters and a least 8 characters long. It\n" +"should *never* be written down. Do not make the password too long or\n" +"complicated, though: you must be able to remember without too much\n" +"effort." +msgstr "" + +#: ../help.pm_.c:187 ../help.pm_.c:418 +msgid "" +"You may now create one or more \"regular\" user account(s), as\n" +"opposed to the \"priviledged\" user account, root. You can create\n" +"one or more account(s) for each person you want to allow to use\n" +"the computer. Note that each user account will have its own\n" +"preferences (graphical environment, program settings, etc.)\n" +"and its own \"home directory\", in which these preferences are\n" +"stored.\n" +"\n" +"\n" +"First of all, create an account for yourself! Even if you will be the only " +"user\n" +"of the machine, you may NOT connect as root for daily use of the system: " +"it's a\n" +"very high security risk. Making the system unusable is very often a typo " +"away.\n" +"\n" +"\n" +"Therefore, you should connect to the system using the user account\n" +"you will have created here, and login as root only for administration\n" +"and maintenance purposes." +msgstr "" + +#: ../help.pm_.c:206 ../help.pm_.c:437 +msgid "" +"Please, please, answer \"Yes\" here! Just for example, when you\n" +"reinstall Windows, it will overwrite the boot sector. Unless you have\n" +"made the bootdisk as suggested, you won't be able to boot into Linux\n" +"any more!" +msgstr "" + +#: ../help.pm_.c:212 ../help.pm_.c:443 +msgid "" +"You need to indicate where you wish\n" +"to place the information required to boot to Linux.\n" +"\n" +"\n" +"Unless you know exactly what you are doing, choose \"First sector of\n" +"drive (MBR)\"." +msgstr "" + +#: ../help.pm_.c:220 ../help.pm_.c:451 +msgid "" +"Now it's time to configure the X Window System, which is the\n" +"core of the Linux GUI (Graphical User Interface). For this purpose,\n" +"you must configure your video card and monitor. Most of these\n" +"steps are automated, though, therefore your work may only consist\n" +"of verifying what has been done and accept the settings :)\n" +"\n" +"When the configuration is over, X will be started (unless you\n" +"ask DrakX not to) so that you can check and see if the\n" +"settings suit you. If they don't, you can come back and\n" +"change them, as many times as necessary." +msgstr "" + +#: ../help.pm_.c:379 +msgid "" +"Linux can deal with many types of printer. Each of these\n" +"types require a different setup.\n" +"\n" +"\n" +"If your printer is directly connected to your computer, select\n" +"\"Local printer\". You will then have to tell which port your\n" +"printer is connected to, and select the appropriate filter.\n" +"\n" +"\n" +"If you want to access a printer located on a remote Unix machine,\n" +"you will have to select \"Remote lpd queue\". In order to make\n" +"it work, no username or password is required, but you will need\n" +"to know the name of the printing queue on this server.\n" +"\n" +"\n" +"If you want to access a SMB printer (which means, a printer located\n" +"on a remote Windows 9x/NT machine), you will have to specify its\n" +"SMB name (which is not its TCP/IP name), and possibly its IP address,\n" +"plus the username, workgroup and password required in order to\n" +"access the printer, and of course the name of the printer.The same goes\n" +"for a NetWare printer, except that you need no workgroup information." +msgstr "" + +#: ../install2.pm_.c:39 +msgid "Choose your language" +msgstr "" + +#: ../install2.pm_.c:40 +msgid "Select installation class" +msgstr "" + +#: ../install2.pm_.c:41 +msgid "Setup SCSI" +msgstr "" + +#: ../install2.pm_.c:42 +msgid "Choose install or upgrade" +msgstr "" + +#: ../install2.pm_.c:43 +msgid "Configure mouse" +msgstr "" + +#: ../install2.pm_.c:44 +msgid "Choose your keyboard" +msgstr "" + +#: ../install2.pm_.c:45 +msgid "Setup filesystems" +msgstr "" + +#: ../install2.pm_.c:46 +msgid "Format partitions" +msgstr "" + +#: ../install2.pm_.c:47 +msgid "Choose packages to install" +msgstr "" + +#: ../install2.pm_.c:48 +msgid "Install system" +msgstr "" + +#: ../install2.pm_.c:49 +msgid "Configure networking" +msgstr "" + +#: ../install2.pm_.c:50 +msgid "Configure timezone" +msgstr "" + +#: ../install2.pm_.c:52 +msgid "Configure printer" +msgstr "" + +#: ../install2.pm_.c:53 ../install_steps_interactive.pm_.c:508 +#: ../install_steps_interactive.pm_.c:509 +msgid "Set root password" +msgstr "" + +#: ../install2.pm_.c:54 +msgid "Add a user" +msgstr "" + +#: ../install2.pm_.c:55 +msgid "Create a bootdisk" +msgstr "" + +#: ../install2.pm_.c:56 +msgid "Install bootloader" +msgstr "" + +#: ../install2.pm_.c:57 +msgid "Configure X" +msgstr "" + +#: ../install2.pm_.c:58 +msgid "Exit install" +msgstr "" + +#: ../install2.pm_.c:80 +msgid "beginner" +msgstr "" + +#: ../install2.pm_.c:80 +msgid "developer" +msgstr "" + +#: ../install2.pm_.c:80 +msgid "expert" +msgstr "" + +#: ../install2.pm_.c:80 +msgid "server" +msgstr "" + +#: ../install2.pm_.c:292 +msgid "Partitioning failed: no root filesystem" +msgstr "" + +#: ../install2.pm_.c:457 +msgid "Error reading file $f" +msgstr "" + +#: ../install2.pm_.c:462 +#, c-format +msgid "Bad kickstart file %s (failed %s)" +msgstr "" + +#: ../install_any.pm_.c:178 +msgid "" +"I can't read your partition table, it's too corrupted for me :(\n" +"I'll try to go on blanking bad partitions" +msgstr "" + +#: ../install_any.pm_.c:193 +msgid "" +"DiskDrake failed to read correctly the partition table.\n" +"Continue at your own risk!" +msgstr "" + +#: ../install_any.pm_.c:232 +msgid "Information" +msgstr "" + +#: ../install_any.pm_.c:233 +#, c-format +msgid "%s: This is not a root partition, please select another one." +msgstr "" + +#: ../install_any.pm_.c:235 +msgid "No root partition found" +msgstr "" + +#: ../install_steps.pm_.c:68 +msgid "" +"An error occurred, but I don't know how to handle it nicely,\n" +"so continue at your own risk :(" +msgstr "" + +#: ../install_steps.pm_.c:123 +#, c-format +msgid "Duplicate mount point %s" +msgstr "" + +#: ../install_steps.pm_.c:316 +msgid "No floppy drive available" +msgstr "" + +#: ../install_steps_graphical.pm_.c:256 +msgid "You must have a swap partition" +msgstr "" + +#: ../install_steps_graphical.pm_.c:259 +msgid "" +"You don't have a swap partition\n" +"Continue anyway?" +msgstr "" + +#: ../install_steps_graphical.pm_.c:303 +msgid "Total size: " +msgstr "" + +#: ../install_steps_graphical.pm_.c:313 +#, c-format +msgid "Version: %s\n" +msgstr "" + +#: ../install_steps_graphical.pm_.c:314 +#, c-format +msgid "Size: %d KB\n" +msgstr "" + +#: ../install_steps_graphical.pm_.c:315 +#, c-format +msgid "" +"Summary: %s\n" +"\n" +msgstr "" + +#: ../install_steps_graphical.pm_.c:404 +msgid "Choose the packages you want to install" +msgstr "" + +#: ../install_steps_graphical.pm_.c:407 +msgid "Info" +msgstr "" + +#: ../install_steps_graphical.pm_.c:415 +msgid "Go" +msgstr "" + +#: ../install_steps_graphical.pm_.c:416 +msgid "Select less" +msgstr "" + +#: ../install_steps_graphical.pm_.c:417 +msgid "Select more" +msgstr "" + +#: ../install_steps_graphical.pm_.c:418 +msgid "Show less" +msgstr "" + +#: ../install_steps_graphical.pm_.c:419 +msgid "Show more" +msgstr "" + +#: ../install_steps_graphical.pm_.c:437 +msgid "Installing" +msgstr "" + +#: ../install_steps_graphical.pm_.c:443 +msgid "Please wait, " +msgstr "" + +#: ../install_steps_graphical.pm_.c:445 +msgid "Time remaining " +msgstr "" + +#: ../install_steps_graphical.pm_.c:446 +msgid "Total time " +msgstr "" + +#: ../install_steps_graphical.pm_.c:451 +msgid "Preparing installation" +msgstr "" + +#: ../install_steps_graphical.pm_.c:472 +#, c-format +msgid "Installing package %s" +msgstr "" + +#: ../install_steps_graphical.pm_.c:497 +msgid "Go on anyway?" +msgstr "" + +#: ../install_steps_graphical.pm_.c:497 +msgid "There was an error ordering packages:" +msgstr "" + +#: ../install_steps_graphical.pm_.c:521 +msgid "Use existing configuration for X11?" +msgstr "" + +#: ../install_steps_graphical.pm_.c:594 ../interactive.pm_.c:47 +#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:194 ../my_gtk.pm_.c:348 +#: ../my_gtk.pm_.c:438 +msgid "Ok" +msgstr "" + +#: ../install_steps_interactive.pm_.c:37 +msgid "An error occurred" +msgstr "" + +#: ../install_steps_interactive.pm_.c:53 +msgid "Which language do you want?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:60 +msgid "Wanring no wrranty, be carfull it's gonna explose ytou romcpature" +msgstr "" + +#: ../install_steps_interactive.pm_.c:61 +msgid "Accept" +msgstr "" + +#: ../install_steps_interactive.pm_.c:61 +msgid "Refuse" +msgstr "" + +#: ../install_steps_interactive.pm_.c:69 +msgid "What is your keyboard layout?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:79 +msgid "Install/Upgrade" +msgstr "" + +#: ../install_steps_interactive.pm_.c:80 +msgid "Is this an install or an upgrade?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:81 +msgid "Install" +msgstr "" + +#: ../install_steps_interactive.pm_.c:81 +msgid "Upgrade" +msgstr "" + +#: ../install_steps_interactive.pm_.c:89 +msgid "Root Partition" +msgstr "" + +#: ../install_steps_interactive.pm_.c:90 +msgid "What is the root partition (/) of your system?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:99 +msgid "Install Class" +msgstr "" + +#: ../install_steps_interactive.pm_.c:100 +msgid "What installation class do you want?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:112 +msgid "What is the type of your mouse?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:116 +msgid "Emulate third button?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:119 +msgid "Mouse Port" +msgstr "" + +#: ../install_steps_interactive.pm_.c:120 +msgid "Which serial port is your mouse connected to?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:133 +msgid "no available partitions" +msgstr "" + +#: ../install_steps_interactive.pm_.c:135 +#, c-format +msgid "(%dMb)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:142 +msgid "Which partition do you want to use as your root partition" +msgstr "" + +#: ../install_steps_interactive.pm_.c:149 +msgid "Choose the mount points" +msgstr "" + +#: ../install_steps_interactive.pm_.c:161 +msgid "You need to reboot for the partition table modifications to take place" +msgstr "" + +#: ../install_steps_interactive.pm_.c:177 +msgid "Choose the partitions you want to format" +msgstr "" + +#: ../install_steps_interactive.pm_.c:187 +#, c-format +msgid "Formatting partition %s" +msgstr "" + +#: ../install_steps_interactive.pm_.c:195 +msgid "Looking for available packages" +msgstr "" + +#: ../install_steps_interactive.pm_.c:201 +msgid "Finding packages to upgrade" +msgstr "" + +#: ../install_steps_interactive.pm_.c:211 +msgid "Keep the current IP configuration" +msgstr "" + +#: ../install_steps_interactive.pm_.c:212 +msgid "Reconfigure network now" +msgstr "" + +#: ../install_steps_interactive.pm_.c:213 +msgid "Do not set up networking" +msgstr "" + +#: ../install_steps_interactive.pm_.c:215 +#: ../install_steps_interactive.pm_.c:221 +msgid "Network Configuration" +msgstr "" + +#: ../install_steps_interactive.pm_.c:216 +msgid "Local networking has already been configured. Do you want to:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:222 +msgid "Do you want to configure LAN (not dialup) networking for your system?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:229 +msgid "no network card found" +msgstr "" + +#: ../install_steps_interactive.pm_.c:256 +#, c-format +msgid "Configuring network device %s" +msgstr "" + +#: ../install_steps_interactive.pm_.c:257 +msgid "" +"Please enter the IP configuration for this machine.\n" +"Each item should be entered as an IP address in dotted-decimal\n" +"notation (for example, 1.2.3.4)." +msgstr "" + +#: ../install_steps_interactive.pm_.c:260 +msgid "IP address:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:260 +msgid "Netmask:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:265 +#: ../install_steps_interactive.pm_.c:404 +msgid "IP address should be in format 1.2.3.4" +msgstr "" + +#: ../install_steps_interactive.pm_.c:283 +msgid "Configuring network" +msgstr "" + +#: ../install_steps_interactive.pm_.c:284 +msgid "" +"Please enter your host name.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''.\n" +"You may also enter the IP address of the gateway if you have one" +msgstr "" + +#: ../install_steps_interactive.pm_.c:288 +msgid "DNS server:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:288 +msgid "Gateway device:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:288 +msgid "Gateway:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:288 +msgid "Host name:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:298 +msgid "Is your hardware clock set to GMT?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:300 +msgid "Which is your timezone?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:310 +msgid "Printer" +msgstr "" + +#: ../install_steps_interactive.pm_.c:311 +msgid "Would you like to configure a printer?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:327 +msgid "Local Printer Options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:328 +msgid "" +"Every print queue (which print jobs are directed to) needs a\n" +"name (often lp) and a spool directory associated with it. What\n" +"name and directory should be used for this queue?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:331 +msgid "Name of queue:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:331 +msgid "Spool directory:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:342 +msgid "Select Printer Connection" +msgstr "" + +#: ../install_steps_interactive.pm_.c:343 +msgid "How is the printer connected?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:351 +msgid "Detecting devices..." +msgstr "" + +#: ../install_steps_interactive.pm_.c:351 +msgid "Test ports" +msgstr "" + +#: ../install_steps_interactive.pm_.c:364 +#, c-format +msgid "A printer, model \"%s\", has been detected on " +msgstr "" + +#: ../install_steps_interactive.pm_.c:371 +msgid "Local Printer Device" +msgstr "" + +#: ../install_steps_interactive.pm_.c:372 +msgid "" +"What device is your printer connected to \n" +"(note that /dev/lp0 is equivalent to LPT1:)?\n" +msgstr "" + +#: ../install_steps_interactive.pm_.c:373 +msgid "Printer Device:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:379 +msgid "Remote lpd Printer Options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:380 +msgid "" +"To use a remote lpd print queue, you need to supply\n" +"the hostname of the printer server and the queue name\n" +"on that server which jobs should be placed in." +msgstr "" + +#: ../install_steps_interactive.pm_.c:383 +msgid "Remote hostname:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:383 +msgid "Remote queue:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:389 +msgid "SMB (Windows 9x/NT) Printer Options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:390 +msgid "" +"To print to a SMB printer, you need to provide the\n" +"SMB host name (Note! It may be different from its\n" +"TCP/IP hostname!) and possibly the IP address of the print server, as\n" +"well as the share name for the printer you wish to access and any\n" +"applicable user name, password, and workgroup information." +msgstr "" + +#: ../install_steps_interactive.pm_.c:395 +msgid "SMB server IP:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:395 +msgid "SMB server host:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:396 +#: ../install_steps_interactive.pm_.c:418 +#: ../install_steps_interactive.pm_.c:510 +msgid "Password:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:396 +msgid "Share name:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:396 +#: ../install_steps_interactive.pm_.c:418 +msgid "User name:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:397 +msgid "Workgroup:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:412 +msgid "NetWare Printer Options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:413 +msgid "" +"To print to a NetWare printer, you need to provide the\n" +"NetWare print server name (Note! it may be different from its\n" +"TCP/IP hostname!) as well as the print queue name for the printer you\n" +"wish to access and any applicable user name and password." +msgstr "" + +#: ../install_steps_interactive.pm_.c:417 +msgid "Print Queue Name:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:417 +msgid "Printer Server:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:428 +msgid "Configure Printer" +msgstr "" + +#: ../install_steps_interactive.pm_.c:429 +msgid "What type of printer do you have?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:440 +#: ../install_steps_interactive.pm_.c:441 +msgid "Paper Size" +msgstr "" + +#: ../install_steps_interactive.pm_.c:460 +msgid "CRLF" +msgstr "" + +#: ../install_steps_interactive.pm_.c:461 +msgid "Fix stair-stepping text?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:477 +msgid "Configure Uniprint Driver" +msgstr "" + +#: ../install_steps_interactive.pm_.c:478 +msgid "You may now set the Uniprint driver options for this printer." +msgstr "" + +#: ../install_steps_interactive.pm_.c:486 +msgid "Configure Color Depth" +msgstr "" + +#: ../install_steps_interactive.pm_.c:487 +msgid "You may now configure the color options for this printer." +msgstr "" + +#: ../install_steps_interactive.pm_.c:510 +msgid "Password (again):" +msgstr "" + +#: ../install_steps_interactive.pm_.c:514 +#: ../install_steps_interactive.pm_.c:546 +msgid "Please try again" +msgstr "" + +#: ../install_steps_interactive.pm_.c:514 +#: ../install_steps_interactive.pm_.c:546 +msgid "The passwords do not match" +msgstr "" + +#: ../install_steps_interactive.pm_.c:515 +msgid "This password is too simple" +msgstr "" + +#: ../install_steps_interactive.pm_.c:533 +msgid "Add user" +msgstr "" + +#: ../install_steps_interactive.pm_.c:534 +#, c-format +msgid "(already added %s)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:534 +#, c-format +msgid "" +"Enter a user\n" +"%s" +msgstr "" + +#: ../install_steps_interactive.pm_.c:535 +#: ../install_steps_interactive.pm_.c:620 +msgid "Password" +msgstr "" + +#: ../install_steps_interactive.pm_.c:535 +msgid "Password (again)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:535 +msgid "Real name" +msgstr "" + +#: ../install_steps_interactive.pm_.c:535 +msgid "Shell" +msgstr "" + +#: ../install_steps_interactive.pm_.c:535 +msgid "User name" +msgstr "" + +#: ../install_steps_interactive.pm_.c:548 +msgid "Please give a user name" +msgstr "" + +#: ../install_steps_interactive.pm_.c:549 +msgid "" +"The user name must contain only lower cased letters, numbers, `-' and `_'" +msgstr "" + +#: ../install_steps_interactive.pm_.c:569 +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"LILO on your system, or another operating system removes LILO, or LILO " +"doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures. Would you like to create a bootdisk for your system?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:577 +msgid "Sorry, no floppy drive available" +msgstr "" + +#: ../install_steps_interactive.pm_.c:580 +msgid "Choose the floppy drive you want to use to make the bootdisk" +msgstr "" + +#: ../install_steps_interactive.pm_.c:585 +#, c-format +msgid "Insert a floppy in drive %s" +msgstr "" + +#: ../install_steps_interactive.pm_.c:586 +msgid "Creating bootdisk" +msgstr "" + +#: ../install_steps_interactive.pm_.c:593 +msgid "Preparing bootloader" +msgstr "" + +#: ../install_steps_interactive.pm_.c:603 +msgid "First sector of boot partition" +msgstr "" + +#: ../install_steps_interactive.pm_.c:603 +msgid "First sector of drive (MBR)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:608 +msgid "LILO Installation" +msgstr "" + +#: ../install_steps_interactive.pm_.c:609 +msgid "Where do you want to install the bootloader?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:612 +msgid "Do you want to use LILO?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:615 +msgid "Boot device" +msgstr "" + +#: ../install_steps_interactive.pm_.c:616 +msgid "Linear (needed for some SCSI drives)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:616 +msgid "linear" +msgstr "" + +#: ../install_steps_interactive.pm_.c:617 +msgid "Compact" +msgstr "" + +#: ../install_steps_interactive.pm_.c:617 +msgid "compact" +msgstr "" + +#: ../install_steps_interactive.pm_.c:618 +msgid "Delay before booting default image" +msgstr "" + +#: ../install_steps_interactive.pm_.c:619 +msgid "Video mode" +msgstr "" + +#: ../install_steps_interactive.pm_.c:621 +msgid "Restrict command line options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:621 +msgid "restrict" +msgstr "" + +#: ../install_steps_interactive.pm_.c:627 +msgid "LILO main options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:631 +msgid "" +"Option ``Restrict command line options'' is of no use without a password" +msgstr "" + +#: ../install_steps_interactive.pm_.c:640 +msgid "" +"Here are the following entries in LILO.\n" +"You can add some more or change the existent ones." +msgstr "" + +#: ../install_steps_interactive.pm_.c:642 +msgid "Add" +msgstr "" + +#: ../install_steps_interactive.pm_.c:660 +msgid "Image" +msgstr "" + +#: ../install_steps_interactive.pm_.c:661 +#: ../install_steps_interactive.pm_.c:669 +msgid "Root" +msgstr "" + +#: ../install_steps_interactive.pm_.c:662 +msgid "Append" +msgstr "" + +#: ../install_steps_interactive.pm_.c:663 +msgid "Initrd" +msgstr "" + +#: ../install_steps_interactive.pm_.c:664 +msgid "Read-write" +msgstr "" + +#: ../install_steps_interactive.pm_.c:670 +msgid "Table" +msgstr "" + +#: ../install_steps_interactive.pm_.c:671 +msgid "Unsafe" +msgstr "" + +#: ../install_steps_interactive.pm_.c:676 +msgid "Label" +msgstr "" + +#: ../install_steps_interactive.pm_.c:678 +msgid "Default" +msgstr "" + +#: ../install_steps_interactive.pm_.c:697 +msgid "Installation of LILO failed. The following error occured:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:708 +msgid "" +"Some steps are not completed.\n" +"Do you really want to quit now?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:712 +msgid "" +"Congratulations, installation is complete.\n" +"Remove the boot media and press return to reboot.\n" +"For information on fixes which are available for this release of " +"Linux-Mandrake,\n" +"consult the Errata available from http://www.linux-mandrake.com/.\n" +"Information on configuring your system is available in the post\n" +"install chapter of the Official Linux-Mandrake User's Guide." +msgstr "" + +#: ../install_steps_interactive.pm_.c:729 +#, c-format +msgid "Installing driver for %s card %s" +msgstr "" + +#: ../install_steps_interactive.pm_.c:730 +#, c-format +msgid "(module %s)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:740 +#, c-format +msgid "What %s card do you have?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:747 +#, c-format +msgid "" +"In some cases, the %s driver needs to have extra information to work\n" +"properly, although it normally works fine without. Would you like to " +"specify\n" +"extra options for it or allow the driver to probe your machine for the\n" +"information it needs? Occasionally, probing will hang a computer, but it " +"should\n" +"not cause any damage." +msgstr "" + +#: ../install_steps_interactive.pm_.c:752 +msgid "Autoprobe" +msgstr "" + +#: ../install_steps_interactive.pm_.c:752 +msgid "Specify options" +msgstr "" + +#: ../install_steps_interactive.pm_.c:756 +#, c-format +msgid "You may now provide its options to module %s." +msgstr "" + +#: ../install_steps_interactive.pm_.c:762 +#, c-format +msgid "" +"You may now provide its options to module %s.\n" +"Options are in format ``name=value name2=value2 ...''.\n" +"For instance, ``io=0x300 irq=7''" +msgstr "" + +#: ../install_steps_interactive.pm_.c:765 +msgid "Module options:" +msgstr "" + +#: ../install_steps_interactive.pm_.c:775 +#, c-format +msgid "" +"Loading module %s failed.\n" +"Do you want to try again with other parameters?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:788 +msgid "Skip PCMCIA probing" +msgstr "" + +#: ../install_steps_interactive.pm_.c:789 +msgid "Configuring PCMCIA cards..." +msgstr "" + +#: ../install_steps_interactive.pm_.c:789 +msgid "PCMCIA" +msgstr "" + +#: ../install_steps_interactive.pm_.c:796 +#, c-format +msgid "Skip %s PCI probing" +msgstr "" + +#: ../install_steps_interactive.pm_.c:800 +#, c-format +msgid "Found %s %s interfaces" +msgstr "" + +#: ../install_steps_interactive.pm_.c:801 +msgid "Do you have another one?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:802 +#, c-format +msgid "Do you have an %s interface?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52 +#: ../my_gtk.pm_.c:347 +msgid "No" +msgstr "" + +#: ../install_steps_interactive.pm_.c:804 ../interactive.pm_.c:52 +#: ../my_gtk.pm_.c:347 +msgid "Yes" +msgstr "" + +#: ../install_steps_interactive.pm_.c:805 +msgid "See hardware info" +msgstr "" + +#: ../install_steps_stdio.pm_.c:21 +#, c-format +msgid "Entering step `%s'\n" +msgstr "" + +#: ../interactive.pm_.c:57 ../my_gtk.pm_.c:195 ../my_gtk.pm_.c:348 +msgid "Cancel" +msgstr "" + +#: ../interactive.pm_.c:149 +msgid "Please wait" +msgstr "" + +#: ../interactive_stdio.pm_.c:34 +#, c-format +msgid "Ambiguity (%s), be more precise\n" +msgstr "" + +#: ../interactive_stdio.pm_.c:35 ../interactive_stdio.pm_.c:50 +#: ../interactive_stdio.pm_.c:69 +msgid "Bad choice, try again\n" +msgstr "" + +#: ../interactive_stdio.pm_.c:38 +#, c-format +msgid " ? (default %s) " +msgstr "" + +#: ../interactive_stdio.pm_.c:51 +#, c-format +msgid "Your choice? (default %s) " +msgstr "" + +#: ../interactive_stdio.pm_.c:70 +#, c-format +msgid "Your choice? (default %s enter `none' for none) " +msgstr "" + +#: ../keyboard.pm_.c:32 +msgid "Belgian" +msgstr "" + +#: ../keyboard.pm_.c:33 +msgid "Bulgarian" +msgstr "" + +#: ../keyboard.pm_.c:35 +msgid "Czech" +msgstr "" + +#: ../keyboard.pm_.c:36 +msgid "German" +msgstr "" + +#: ../keyboard.pm_.c:37 +msgid "Danish" +msgstr "" + +#: ../keyboard.pm_.c:38 +msgid "Dvorak" +msgstr "" + +#: ../keyboard.pm_.c:41 +msgid "Spanish" +msgstr "" + +#: ../keyboard.pm_.c:42 +msgid "Finnish" +msgstr "" + +#: ../keyboard.pm_.c:43 +msgid "French" +msgstr "" + +#: ../keyboard.pm_.c:48 +msgid "Greek" +msgstr "" + +#: ../keyboard.pm_.c:50 +msgid "Hungarian" +msgstr "" + +#: ../keyboard.pm_.c:52 +msgid "Israeli" +msgstr "" + +#: ../keyboard.pm_.c:53 +msgid "Icelandic" +msgstr "" + +#: ../keyboard.pm_.c:55 +msgid "Italian" +msgstr "" + +#: ../keyboard.pm_.c:56 +msgid "Latin American" +msgstr "" + +#: ../keyboard.pm_.c:58 +msgid "Dutch" +msgstr "" + +#: ../keyboard.pm_.c:62 +msgid "Norwegian" +msgstr "" + +#: ../keyboard.pm_.c:64 +msgid "Polish" +msgstr "" + +#: ../keyboard.pm_.c:65 +msgid "Portuguese" +msgstr "" + +#: ../keyboard.pm_.c:68 +msgid "Russian" +msgstr "" + +#: ../keyboard.pm_.c:69 +msgid "Swedish" +msgstr "" + +#: ../keyboard.pm_.c:71 +msgid "Swiss (French layout)" +msgstr "" + +#: ../keyboard.pm_.c:72 +msgid "Swiss (German layout)" +msgstr "" + +#: ../keyboard.pm_.c:77 +msgid "Turkish (traditional \"F\" model)" +msgstr "" + +#: ../keyboard.pm_.c:78 +msgid "Turkish (modern \"Q\" model)" +msgstr "" + +#: ../keyboard.pm_.c:80 +msgid "UK keyboard" +msgstr "" + +#: ../keyboard.pm_.c:82 +msgid "US keyboard" +msgstr "" + +#: ../lilo.pm_.c:111 +msgid "" +"Welcome to LILO the operating system chooser!\n" +"To list the possible choices, press \n" +msgstr "" + +#: ../mouse.pm_.c:15 +msgid "No Mouse" +msgstr "" + +#: ../mouse.pm_.c:16 +msgid "Microsoft Rev 2.1A or higher (serial)" +msgstr "" + +#: ../mouse.pm_.c:17 +msgid "Logitech CC Series (serial)" +msgstr "" + +#: ../mouse.pm_.c:18 +msgid "Logitech MouseMan+/FirstMouse+ (serial)" +msgstr "" + +#: ../mouse.pm_.c:19 +msgid "ASCII MieMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:20 +msgid "Genius NetMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:21 +msgid "Microsoft IntelliMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:22 +msgid "MM Series (serial)" +msgstr "" + +#: ../mouse.pm_.c:23 +msgid "MM HitTablet (serial)" +msgstr "" + +#: ../mouse.pm_.c:24 +msgid "Logitech Mouse (serial, old C7 type)" +msgstr "" + +#: ../mouse.pm_.c:25 +msgid "Logitech MouseMan/FirstMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:26 +msgid "Generic Mouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:27 +msgid "Microsoft compatible (serial)" +msgstr "" + +#: ../mouse.pm_.c:28 +msgid "Generic 3 Button Mouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:29 +msgid "Mouse Systems (serial)" +msgstr "" + +#: ../mouse.pm_.c:30 +msgid "Generic Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:31 +msgid "Logitech MouseMan/FirstMouse (ps/2)" +msgstr "" + +#: ../mouse.pm_.c:32 +msgid "Generic 3 Button Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:33 +msgid "ALPS GlidePoint (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:34 +msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:35 +msgid "Kensington Thinking Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:36 +msgid "ASCII MieMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:37 +msgid "Genius NetMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:38 +msgid "Genius NetMouse Pro (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:39 +msgid "Genius NetScroll (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:40 +msgid "Microsoft IntelliMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:41 +msgid "ATI Bus Mouse" +msgstr "" + +#: ../mouse.pm_.c:42 +msgid "Microsoft Bus Mouse" +msgstr "" + +#: ../mouse.pm_.c:43 +msgid "Logitech Bus Mouse" +msgstr "" + +#: ../partition_table.pm_.c:373 +msgid "" +"You have a hole in your partition table but I can't use it.\n" +"The only solution is to move your primary partitions to have the hole next " +"to the extended partitions" +msgstr "" + +#: ../partition_table.pm_.c:459 +#, c-format +msgid "Error reading file %s" +msgstr "" + +#: ../partition_table.pm_.c:466 +#, c-format +msgid "Restoring from file %s failed: %s" +msgstr "" + +#: ../partition_table.pm_.c:468 +msgid "Bad backup file" +msgstr "" + +#: ../partition_table.pm_.c:488 +#, c-format +msgid "Error writing to file %s" +msgstr "" + +#: ../printer.pm_.c:244 +msgid "Local printer" +msgstr "" + +#: ../printer.pm_.c:245 +msgid "Remote lpd" +msgstr "" + +#: ../printer.pm_.c:246 +msgid "SMB/Windows 95/NT" +msgstr "" + +#: ../printer.pm_.c:247 +msgid "NetWare" +msgstr "" -- cgit v1.2.1