From 22dbbe3229fd6eb79108edac3209a828e1f917a7 Mon Sep 17 00:00:00 2001 From: Till Kamppeter Date: Thu, 29 Aug 2002 01:14:56 +0000 Subject: s/||/or/ between commands, the high-precedence "||" lead to problems sometimes. --- perl-install/printer.pm | 70 ++++++++++++++++++++++++------------------------- 1 file changed, 35 insertions(+), 35 deletions(-) (limited to 'perl-install') diff --git a/perl-install/printer.pm b/perl-install/printer.pm index 3cde49185..c00739394 100644 --- a/perl-install/printer.pm +++ b/perl-install/printer.pm @@ -106,7 +106,7 @@ sub set_default_spooler ($) { # Make Foomatic config directory if it does not exist yet mkdir "$prefix$FOOMATICCONFDIR" if (!(-d "$prefix$FOOMATICCONFDIR")); # Mark the default driver in a file - open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" || + open DEFSPOOL, "> $prefix$FOOMATIC_DEFAULT_SPOOLER" or die "Cannot create $prefix$FOOMATIC_DEFAULT_SPOOLER!"; print DEFSPOOL $printer->{SPOOLER}; close DEFSPOOL; @@ -120,16 +120,16 @@ sub set_permissions { if (!$::isInstall) { return 1 } if ($owner && $group) { run_program::rooted($prefix, "/bin/chown", "$owner.$group", $file) - || die "Could not start chown!"; + or die "Could not start chown!"; } elsif ($owner) { run_program::rooted($prefix, "/bin/chown", $owner, $file) - || die "Could not start chown!"; + or die "Could not start chown!"; } elsif ($group) { run_program::rooted($prefix, "/bin/chgrp", $group, $file) - || die "Could not start chgrp!"; + or die "Could not start chgrp!"; } run_program::rooted($prefix, "/bin/chmod", $perms, $file) - || die "Could not start chmod!"; + or die "Could not start chmod!"; } sub restart_service ($) { @@ -192,7 +192,7 @@ sub service_starts_on_boot ($) { my ($service) = @_; local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" || + "/bin/sh -c \"export LC_ALL=C; /sbin/chkconfig --list $service 2>&1\" |" or return 0; while (my $line = ) { chomp $line; @@ -208,7 +208,7 @@ sub service_starts_on_boot ($) { sub start_service_on_boot ($) { my ($service) = @_; run_program::rooted($prefix, "/sbin/chkconfig", "--add", $service) - || return 0; + or return 0; return 1; } @@ -276,7 +276,7 @@ sub assure_device_is_available_for_cups { my ($device) = @_; local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" || + "/bin/sh -c \"export LC_ALL=C; /usr/sbin/lpinfo -v\" |" or die "Could not run \"lpinfo\"!"; while (my $line = ) { if ($line =~ /$device/) { # Found a line containing the device name, @@ -293,7 +293,7 @@ sub network_running { # If the network is not running return 0, otherwise 1. local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" || + "/bin/sh -c \"export LC_ALL=C; /sbin/ifconfig\" |" or die "Could not run \"ifconfig\"!"; while (my $line = ) { if (($line !~ /^lo\s+/) && # The loopback device can have been @@ -319,7 +319,7 @@ sub getSNMPModel { # SNMP request to auto-detect model local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "/bin/sh -c \"scli -1 -c 'show printer info' $host\" |" || + "/bin/sh -c \"scli -1 -c 'show printer info' $host\" |" or return { CLASS => 'PRINTER', MODEL => _("Unknown Model"), MANUFACTURER => "", @@ -389,7 +389,7 @@ sub getSMBPrinterShares { # SMB request to auto-detect shares local *F; open F, ($::testing ? "" : "chroot $prefix/ ") . - "/bin/sh -c \"export LC_ALL=C; smbclient -N -L $host\" |" || return (); + "/bin/sh -c \"export LC_ALL=C; smbclient -N -L $host\" |" or return (); my $insharelist = 0; my @shares; while (my $l = ) { @@ -495,7 +495,7 @@ sub whatNetPrinter { local *F; open F, ($::testing ? "" : "chroot $prefix/ ") . "/bin/sh -c \"export LC_ALL=C; nmap -r -P0 -p $portlist $hostlist\" |" - || return @res; + or return @res; my $host = ""; my $ip = ""; my $port = ""; @@ -563,7 +563,7 @@ sub spooler_in_security_level { $file = "$prefix/etc/security/msec/server.$level"; if (-f $file) { local *F; - open F, "< $file" || return 0; + open F, "< $file" or return 0; while (my $line = ) { if ($line =~ /^\s*$sp\s*$/) { close F; @@ -582,7 +582,7 @@ sub add_spooler_to_security_level { $file = "$prefix/etc/security/msec/server.$level"; if (-f $file) { local *F; - open F, ">> $file" || return 0; + open F, ">> $file" or return 0; print F "$sp\n"; close F; } @@ -603,7 +603,7 @@ sub set_alternative { # Read the list of executables for the given command to find the number # of the desired executable open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" || + "/bin/sh -c \"export LC_ALL=C; /bin/echo | update-alternatives --config $command \" |" or die "Could not run \"update-alternatives\"!"; my $choice = 0; while (my $line = ) { @@ -628,7 +628,7 @@ sub pdq_panic_button { my $setting = $_[0]; if (-f "$prefix/usr/sbin/pdqpanicbutton") { run_program::rooted($prefix, "/usr/sbin/pdqpanicbutton", "--$setting") - || die "Could not $setting PDQ panic buttons!"; + or die "Could not $setting PDQ panic buttons!"; } } @@ -678,7 +678,7 @@ sub read_configured_queues($) { #- poll queue info local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "foomatic-configure -P -q -s $spooler |" || + "foomatic-configure -P -q -s $spooler |" or die "Could not run foomatic-configure"; eval (join('',())); close F; @@ -692,7 +692,7 @@ sub read_configured_queues($) { #- Poll the queues of the current default spooler local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "foomatic-configure -P -q -s $printer->{SPOOLER} |" || + "foomatic-configure -P -q -s $printer->{SPOOLER} |" or die "Could not run foomatic-configure"; eval (join('',())); close F; @@ -824,7 +824,7 @@ sub read_printer_db(;$) { # appropriate file when it is already generated if (!(-f $dbpath)) { open DBPATH, ($::testing ? $prefix : "chroot $prefix/ ") . - "foomatic-configure -O -q |" || + "foomatic-configure -O -q |" or die "Could not run foomatic-configure"; } else { open DBPATH, $dbpath or die "An error occurred on $dbpath : $!"; @@ -959,7 +959,7 @@ sub read_foomatic_options ($) { " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") . ($printer->{SPECIAL_OPTIONS} ? " $printer->{SPECIAL_OPTIONS}" : "") - . " |" || + . " |" or die "Could not run foomatic-configure"; eval (join('',())); close F; @@ -975,10 +975,10 @@ sub read_cups_options ($) { local *F; if ($queue_or_file =~ /.ppd.gz$/) { # compressed PPD file open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "gunzip -cd $queue_or_file | lphelp - |" || return 0; + "gunzip -cd $queue_or_file | lphelp - |" or return 0; } else { # PPD file not compressed or queue open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "lphelp $queue_or_file |" || return 0; + "lphelp $queue_or_file |" or return 0; } my $i; my $j; @@ -1083,7 +1083,7 @@ sub read_cups_printer_list { # daemon currently knows, including remote ones. local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "lpstat -v |" || return (); + "lpstat -v |" or return (); my @printerlist; my $line; while ($line = ) { @@ -1110,7 +1110,7 @@ sub get_cups_remote_queues { # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/ local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "lpstat -v |" || return (); + "lpstat -v |" or return (); my @printerlist; my $line; while ($line = ) { @@ -1231,7 +1231,7 @@ sub set_default_printer { my ($printer) = $_[0]; run_program::rooted($prefix, "foomatic-configure", "-D", "-q", "-s", $printer->{SPOOLER}, - "-n", $printer->{DEFAULT}) || return 0; + "-n", $printer->{DEFAULT}) or return 0; return 1; } @@ -1239,7 +1239,7 @@ sub get_default_printer { my $printer = $_[0]; local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "foomatic-configure -Q -q -s $printer->{SPOOLER} |" || return undef; + "foomatic-configure -Q -q -s $printer->{SPOOLER} |" or return undef; my $line; while ($line = ) { if ($line =~ m!^\s*(.*)\s*$!) { @@ -1689,7 +1689,7 @@ sub get_copiable_queues { my @queuelist; #- here we will list all Foomatic-generated queues # Get queue list with foomatic-configure open QUEUEOUTPUT, ($::testing ? $prefix : "chroot $prefix/ ") . - "foomatic-configure -Q -q -s $oldspooler |" || + "foomatic-configure -Q -q -s $oldspooler |" or die "Could not run foomatic-configure"; my $entry = {}; @@ -1777,7 +1777,7 @@ sub configure_hpoj { # the subroutine definitions stay valid after leaving this subroutine. if (!$ptalinitread) { local *PTALINIT; - open PTALINIT, "$prefix/usr/sbin/ptal-init" || do { + open PTALINIT, "$prefix/usr/sbin/ptal-init" or do { die "unable to open $prefix/usr/sbin/ptal-init"; }; my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init @@ -1961,7 +1961,7 @@ sub configure_hpoj { # Open configuration file local *CONFIG; - open(CONFIG,"> $prefix/etc/ptal/$ptaldevice") || + open(CONFIG,"> $prefix/etc/ptal/$ptaldevice") or die "Could not open /etc/ptal/$ptaldevice for writing!\n"; # Write file header. @@ -2723,7 +2723,7 @@ sub findopenofficeconfigfile { sub readsofficeconfigfile { my ($file) = @_; local *F; - open F, "< $prefix$file" || return ""; + open F, "< $prefix$file" or return ""; my $filecontent = join("", ); close F; return $filecontent; @@ -2732,7 +2732,7 @@ sub readsofficeconfigfile { sub writesofficeconfigfile { my ($file, $filecontent) = @_; local *F; - open F, "> $prefix$file" || return 0; + open F, "> $prefix$file" or return 0; print F $filecontent; close F; return 1; @@ -2744,7 +2744,7 @@ sub getcupsremotequeues { # "BrowsePoll" entries in the local /etc/cups/cupsd.conf local *F; open F, ($::testing ? $prefix : "chroot $prefix/ ") . - "lpstat -v |" || return (); + "lpstat -v |" or return (); my @printerlist; my $line; while ($line = ) { @@ -3072,7 +3072,7 @@ sub findgimpconfigfiles { } my @filestotreat; local *PASSWD; - open PASSWD, "< $prefix/etc/passwd" || die "Cannot read /etc/passwd!\n"; + open PASSWD, "< $prefix/etc/passwd" or die "Cannot read /etc/passwd!\n"; while () { chomp; if ($_ =~ /^([^:]+):[^:]*:([^:]+):([^:]+):[^:]*:([^:]+):[^:]*$/) { @@ -3111,7 +3111,7 @@ sub findgimpconfigfiles { sub readgimpconfigfile { my ($file) = @_; local *F; - open F, "< $prefix$file" || return ""; + open F, "< $prefix$file" or return ""; my $filecontent = join("", ); close F; return $filecontent; @@ -3120,7 +3120,7 @@ sub readgimpconfigfile { sub writegimpconfigfile { my ($file, $filecontent) = @_; local *F; - open F, "> $prefix$file" || return 0; + open F, "> $prefix$file" or return 0; print F $filecontent; close F; return 1; -- cgit v1.2.1