From a4220a32aa17b97eafef4b3c1fdfa870c692785e Mon Sep 17 00:00:00 2001 From: Thierry Vignaud Date: Fri, 13 Jan 2012 18:38:22 +0000 Subject: kill 10 years old snapshot of pppd & pppoe (now using upstream pppd & pppoe) --- mdk-stage1/ppp/sample/auth-down | 17 ---- mdk-stage1/ppp/sample/auth-up | 17 ---- mdk-stage1/ppp/sample/ip-down | 22 ------ mdk-stage1/ppp/sample/ip-up | 23 ------ mdk-stage1/ppp/sample/options | 153 ------------------------------------ mdk-stage1/ppp/sample/options.ttyXX | 14 ---- mdk-stage1/ppp/sample/pap-secrets | 28 ------- 7 files changed, 274 deletions(-) delete mode 100644 mdk-stage1/ppp/sample/auth-down delete mode 100644 mdk-stage1/ppp/sample/auth-up delete mode 100644 mdk-stage1/ppp/sample/ip-down delete mode 100644 mdk-stage1/ppp/sample/ip-up delete mode 100644 mdk-stage1/ppp/sample/options delete mode 100644 mdk-stage1/ppp/sample/options.ttyXX delete mode 100644 mdk-stage1/ppp/sample/pap-secrets (limited to 'mdk-stage1/ppp/sample') diff --git a/mdk-stage1/ppp/sample/auth-down b/mdk-stage1/ppp/sample/auth-down deleted file mode 100644 index edde65db1..000000000 --- a/mdk-stage1/ppp/sample/auth-down +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh -# -# A program or script which is executed after the remote system -# successfully authenticates itself. It is executed with the parameters -# -# - -# -# The environment is cleared before executing this script -# so the path must be reset -# -PATH=/usr/sbin:/sbin:/usr/bin:/bin -export PATH - -echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats - -# last line diff --git a/mdk-stage1/ppp/sample/auth-up b/mdk-stage1/ppp/sample/auth-up deleted file mode 100644 index 54722a3c0..000000000 --- a/mdk-stage1/ppp/sample/auth-up +++ /dev/null @@ -1,17 +0,0 @@ -#!/bin/sh -# -# A program or script which is executed after the remote system -# successfully authenticates itself. It is executed with the parameters -# -# - -# -# The environment is cleared before executing this script -# so the path must be reset -# -PATH=/usr/sbin:/sbin:/usr/bin:/bin -export PATH - -echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats - -# last line diff --git a/mdk-stage1/ppp/sample/ip-down b/mdk-stage1/ppp/sample/ip-down deleted file mode 100644 index b771fb644..000000000 --- a/mdk-stage1/ppp/sample/ip-down +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/sh -# -# This script is run by the pppd _after_ the link is brought down. -# It should be used to delete routes, unset IP addresses etc. -# -# This script is called with the following arguments: -# Arg Name Example -# $1 Interface name ppp0 -# $2 The tty ttyS1 -# $3 The link speed 38400 -# $4 Local IP number 12.34.56.78 -# $5 Peer IP number 12.34.56.99 -# - -# -# The environment is cleared before executing this script -# so the path must be reset -# -PATH=/usr/sbin:/sbin:/usr/bin:/bin -export PATH - -# last line diff --git a/mdk-stage1/ppp/sample/ip-up b/mdk-stage1/ppp/sample/ip-up deleted file mode 100644 index 02bb71c44..000000000 --- a/mdk-stage1/ppp/sample/ip-up +++ /dev/null @@ -1,23 +0,0 @@ -#!/bin/sh -# -# This script is run by the pppd after the link is established. -# It should be used to add routes, set IP address, run the mailq -# etc. -# -# This script is called with the following arguments: -# Arg Name Example -# $1 Interface name ppp0 -# $2 The tty ttyS1 -# $3 The link speed 38400 -# $4 Local IP number 12.34.56.78 -# $5 Peer IP number 12.34.56.99 -# - -# -# The environment is cleared before executing this script -# so the path must be reset -# -PATH=/usr/sbin:/sbin:/usr/bin:/bin -export PATH - -# last line diff --git a/mdk-stage1/ppp/sample/options b/mdk-stage1/ppp/sample/options deleted file mode 100644 index 8d0a3f963..000000000 --- a/mdk-stage1/ppp/sample/options +++ /dev/null @@ -1,153 +0,0 @@ -# /etc/ppp/options - -# The name of this server. Often, the FQDN is used here. -#name - -# Enforce the use of the hostname as the name of the local system for -# authentication purposes (overrides the name option). -usehostname - -# If no local IP address is given, pppd will use the first IP address -# that belongs to the local hostname. If "noipdefault" is given, this -# is disabled and the peer will have to supply an IP address. -noipdefault - -# With this option, pppd will accept the peer's idea of our local IP -# address, even if the local IP address was specified in an option. -#ipcp-accept-local - -# With this option, pppd will accept the peer's idea of its (remote) IP -# address, even if the remote IP address was specified in an option. -#ipcp-accept-remote - -# Specify which DNS Servers the incoming Win95 or WinNT Connection should use -# Two Servers can be remotely configured -#ms-dns 192.168.1.1 -#ms-dns 192.168.1.2 - -# Specify which WINS Servers the incoming connection Win95 or WinNT should use -#wins-addr 192.168.1.50 -#wins-addr 192.168.1.51 - -# enable this on a server that already has a permanent default route -#nodefaultroute - -# Run the executable or shell command specified after pppd has terminated -# the link. This script could, for example, issue commands to the modem -# to cause it to hang up if hardware modem control signals were not -# available. -# If mgetty is running, it will reset the modem anyway. So there is no need -# to do it here. -#disconnect "chat -- \d+++\d\c OK ath0 OK" - -# Increase debugging level (same as -d). The debug output is written -# to syslog LOG_LOCAL2. -debug - -# Enable debugging code in the kernel-level PPP driver. The argument n -# is a number which is the sum of the following values: 1 to enable -# general debug messages, 2 to request that the contents of received -# packets be printed, and 4 to request that the contents of transmitted -# packets be printed. -#kdebug n - -# Require the peer to authenticate itself before allowing network -# packets to be sent or received. -# Please do not disable this setting. It is expected to be standard in -# future releases of pppd. Use the call option (see manpage) to disable -# authentication for specific peers. -#auth - -# authentication can either be pap or chap. As most people only want to -# use pap, you can also disable chap: -#require-pap -#refuse-chap - -# Use hardware flow control (i.e. RTS/CTS) to control the flow of data -# on the serial port. -crtscts - -# Specifies that pppd should use a UUCP-style lock on the serial device -# to ensure exclusive access to the device. -lock - -# Use the modem control lines. -modem - -# async character map -- 32-bit hex; each bit is a character -# that needs to be escaped for pppd to receive it. 0x00000001 -# represents '\x01', and 0x80000000 represents '\x1f'. -# To allow pppd to work over a rlogin/telnet connection, ou should escape -# XON (^Q), XOFF (^S) and ^]: (The peer should use "escape ff".) -#asyncmap 200a0000 -asyncmap 0 - -# Specifies that certain characters should be escaped on transmission -# (regardless of whether the peer requests them to be escaped with its -# async control character map). The characters to be escaped are -# specified as a list of hex numbers separated by commas. Note that -# almost any character can be specified for the escape option, unlike -# the asyncmap option which only allows control characters to be -# specified. The characters which may not be escaped are those with hex -# values 0x20 - 0x3f or 0x5e. -#escape 11,13,ff - -# Set the MRU [Maximum Receive Unit] value to for negotiation. pppd -# will ask the peer to send packets of no more than bytes. The -# minimum MRU value is 128. The default MRU value is 1500. A value of -# 296 is recommended for slow links (40 bytes for TCP/IP header + 256 -# bytes of data). -#mru 542 - -# Set the MTU [Maximum Transmit Unit] value to . Unless the peer -# requests a smaller value via MRU negotiation, pppd will request that -# the kernel networking code send data packets of no more than n bytes -# through the PPP network interface. -#mtu - -# Set the interface netmask to , a 32 bit netmask in "decimal dot" -# notation (e.g. 255.255.255.0). -#netmask 255.255.255.0 - -# Don't fork to become a background process (otherwise pppd will do so -# if a serial device is specified). -nodetach - -# Set the assumed name of the remote system for authentication purposes -# to . -#remotename - -# Add an entry to this system's ARP [Address Resolution Protocol] -# table with the IP address of the peer and the Ethernet address of this -# system. {proxyarp,noproxyarp} -proxyarp - -# Use the system password database for authenticating the peer using -# PAP. Note: mgetty already provides this option. If this is specified -# then dialin from users using a script under Linux to fire up ppp wont work. -#login - -# If this option is given, pppd will send an LCP echo-request frame to -# the peer every n seconds. Under Linux, the echo-request is sent when -# no packets have been received from the peer for n seconds. Normally -# the peer should respond to the echo-request by sending an echo-reply. -# This option can be used with the lcp-echo-failure option to detect -# that the peer is no longer connected. -lcp-echo-interval 30 - -# If this option is given, pppd will presume the peer to be dead if n -# LCP echo-requests are sent without receiving a valid LCP echo-reply. -# If this happens, pppd will terminate the connection. Use of this -# option requires a non-zero value for the lcp-echo-interval parameter. -# This option can be used to enable pppd to terminate after the physical -# connection has been broken (e.g., the modem has hung up) in -# situations where no hardware modem control lines are available. -lcp-echo-failure 4 - -# Specifies that pppd should disconnect if the link is idle for n seconds. -idle 600 - -# Disable the IPXCP and IPX protocols. -noipx - -# ------ diff --git a/mdk-stage1/ppp/sample/options.ttyXX b/mdk-stage1/ppp/sample/options.ttyXX deleted file mode 100644 index d4202f534..000000000 --- a/mdk-stage1/ppp/sample/options.ttyXX +++ /dev/null @@ -1,14 +0,0 @@ -# If you need to set up multiple serial lines then copy this file to -# options. for each tty with a modem on it. -# -# The options.tty file will assign an IP address to each PPP connection -# as it comes up. They must all be distinct! -# -# Example: -# options.ttyS1 for com2 under DOS. -# -# Edit the following line so that the first IP address -# mentioned is the ip address of the serial port while the second -# is the IP address of your host -# -hostname-s1:hostname diff --git a/mdk-stage1/ppp/sample/pap-secrets b/mdk-stage1/ppp/sample/pap-secrets deleted file mode 100644 index 098971b9f..000000000 --- a/mdk-stage1/ppp/sample/pap-secrets +++ /dev/null @@ -1,28 +0,0 @@ -# Secrets for authentication using PAP -# client server secret IP addresses - -# OUTBOUND CONNECTIONS -# Here you should add your userid password to connect to your providers via -# pap. The * means that the password is to be used for ANY host you connect -# to. Thus you do not have to worry about the foreign machine name. Just -# replace password with your password. -# If you have different providers with different passwords then you better -# remove the following line. -#hostname * password - -# INBOUND CONNECTIONS -#client hostname 192.168.1.1 - -# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config, -# all users in /etc/passwd can use their password for pap-authentication. -# -# Every regular user can use PPP and has to use passwords from /etc/passwd -#* hostname "" -# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any -# other accounts that should not be able to use pppd! Replace hostname -# with your local hostname. -#guest hostname "*" - -#master hostname "*" - -#root hostname "*" - -#support hostname "*" - -#stats hostname "*" - -- cgit v1.2.1