From 88a07c82cece62903ae68e1e2c482d810bbf8560 Mon Sep 17 00:00:00 2001
From: Pascal Rigaux <pixel@mandriva.com>
Date: Thu, 29 Jul 1999 15:18:54 +0000
Subject: no_comment

---
 docs/diskdrake.TODO                  |  14 +
 docs/object_class.fig                |  32 ++
 perl-install/Makefile                |   5 +-
 perl-install/Xconfigurator.pm        | 450 ++++++++++++++++++++++++++++
 perl-install/Xconfigurator_consts.pm | 553 +++++++++++++++++++++++++++++++++++
 perl-install/common.pm               |  31 +-
 perl-install/detect_devices.pm       |   4 +-
 perl-install/install2.pm             |  19 +-
 perl-install/install_any.pm          |   3 +-
 perl-install/install_steps.pm        |   4 +-
 perl-install/install_steps_stdio.pm  | 148 +---------
 perl-install/interactive.pm          |  53 ++++
 perl-install/interactive_gtk.pm      |  37 +++
 perl-install/interactive_stdio.pm    |  80 +++++
 perl-install/keyboard.pm             |   2 +-
 perl-install/log.pm                  |   4 +-
 perl-install/my_gtk.pm               |  38 +--
 perl-install/partition_table.pm      |   1 +
 perl-install/partition_table_raw.pm  |   4 +-
 perl-install/pkgs.pm                 |  24 +-
 perl-install/resize_fat/fat.pm       |   2 +-
 perl-install/resize_fat/io.pm        |   2 +-
 perl-install/share/diskdrake.rc      |   2 +-
 23 files changed, 1316 insertions(+), 196 deletions(-)
 create mode 100644 docs/diskdrake.TODO
 create mode 100644 docs/object_class.fig
 create mode 100644 perl-install/Xconfigurator.pm
 create mode 100644 perl-install/Xconfigurator_consts.pm
 create mode 100644 perl-install/interactive.pm
 create mode 100644 perl-install/interactive_gtk.pm
 create mode 100644 perl-install/interactive_stdio.pm

diff --git a/docs/diskdrake.TODO b/docs/diskdrake.TODO
new file mode 100644
index 000000000..097789747
--- /dev/null
+++ b/docs/diskdrake.TODO
@@ -0,0 +1,14 @@
+text version
+
+save/restore partitions in a file
+
+display the information about the correspondance color2type
+
+have ``undo''
+
+handle the `luke' case (main extended partition must be extended)
+
+ajouter une verif apres fdiskReadPartitionTable pour s'assurer qu'on se 
+trompe pas sur la facon de calculer le start_cyl, end_cyl...
+Pas possible de le faire dans fdiskReadPartitionTable car start est relatif dans les etendues
+
diff --git a/docs/object_class.fig b/docs/object_class.fig
new file mode 100644
index 000000000..0c9ffaff5
--- /dev/null
+++ b/docs/object_class.fig
@@ -0,0 +1,32 @@
+#FIG 3.2
+Landscape
+Center
+Inches
+Letter  
+100.00
+Single
+-2
+1200 2
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 2625 1200 2625 1725
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 7575 1125 7575 1650
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 7575 2100 4350 3225
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 5025 2025 4350 3225
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 2625 2100 4350 3225
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 5025 2025 6075 4125
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 2625 1200 4950 1725
+2 1 0 1 0 7 100 0 -1 0.000 0 0 -1 0 0 2
+	 7575 1125 4950 1725
+4 0 0 100 0 0 12 0.0000 4 180 1755 1800 1050 install_steps_graphical\001
+4 0 0 100 0 0 12 0.0000 4 180 1440 6900 975 install_steps_stdio\001
+4 0 0 100 0 0 12 0.0000 4 180 1140 2100 1950 interactive_gtk\001
+4 0 0 100 0 0 12 0.0000 4 180 1275 6900 1950 interactive_stdio\001
+4 0 0 100 0 0 12 0.0000 4 180 1875 4125 1950 install_steps_interactive\001
+4 0 0 100 0 0 12 0.0000 4 135 810 3975 3450 interactive\001
+4 0 0 100 0 0 12 0.0000 4 180 975 5625 4350 install_steps\001
diff --git a/perl-install/Makefile b/perl-install/Makefile
index 3eaafc310..30ea0be7f 100644
--- a/perl-install/Makefile
+++ b/perl-install/Makefile
@@ -52,7 +52,7 @@ verify_c:
 	./verify_c $(PMS)
 
 gendepslist: %: %.cc
-	$(CXX) -I/usr/include/rpm $(CFLAGS) $< -lrpm -ldb -lz -o $@
+	$(CXX) -I/usr/include/rpm $(CFLAGS) $< -lrpm -ldb1 -lz -o $@
 
 depslist: gendepslist
 	./gendepslist $(ROOTDEST)/Mandrake/base/depslist /tmp/rhimage/Mandrake/RPMS/*.rpm
@@ -88,6 +88,7 @@ get_needed_files: $(SO_FILES)
 	install -d $(DEST)/usr/bin
 	install -d $(DEST)/usr/lib
 	install -d $(DEST)/usr/share
+	install -d $(ROOTDEST)/Mandrake/base
 	install -s $(LOCALFILES) $(DEST)/usr/bin
 
 	for i in `cat /tmp/list`; do \
@@ -138,7 +139,7 @@ full_stage2:
 stage2:
 	$(MAKE) install_pms
 	cd $(ROOTDEST) ; tar cfz /tmp/instimage-full.tgz Mandrake
-	cd $(ROOTDEST) ; tar cfz /tmp/instimage-light.tgz Mandrake/base/depslist Mandrake/instimage/usr/[bl]*
+	cd $(ROOTDEST) ; tar cfz /tmp/instimage-light.tgz Mandrake/base/compss Mandrake/instimage/usr/[bl]*
 
 	@#rm -rf /mnt/initrd/*
 	@#cp -a $(DEST)/* /mnt/initrd
diff --git a/perl-install/Xconfigurator.pm b/perl-install/Xconfigurator.pm
new file mode 100644
index 000000000..9749884d2
--- /dev/null
+++ b/perl-install/Xconfigurator.pm
@@ -0,0 +1,450 @@
+package Xconfigurator;
+
+use diagnostics;
+use strict;
+use vars qw($in $resolution_wanted @depths @resolutions @accelservers @allservers %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate @vsync_range %standard_monitors $intro_text $finalcomment_text $s3_comment $cirrus_comment $probeonlywarning_text $monitorintro_text $hsyncintro_text $vsyncintro_text $XF86firstchunk_text $keyboardsection_start $keyboardsection_part2 $keyboardsection_end $pointersection_text1 $pointersection_text2 $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text $devicesection_text $screensection_text1);
+
+use pci_probing::main;
+use common qw(:common :file);
+use log;
+
+use Xconfigurator_consts;
+
+1;
+
+sub setVirtual($) {
+    my $vt = '';
+    local *C; 
+    sysopen C, "/dev/console", 2 or die "failed to open /dev/console: $!";
+    ioctl(C, c::VT_GETSTATE(), $vt) or die "ioctl VT_GETSTATE failed";
+    ioctl(C, c::VT_ACTIVATE(), $_[0]) or die "ioctl VT_ACTIVATE failed";
+    ioctl(C, c::VT_WAITACTIVE(), $_[0]) or die "ioctl VT_WAITACTIVE failed";
+    unpack "S", $vt;
+}
+
+sub readCardsDB {
+    my ($file) = @_;
+    my ($card, %cards);
+
+    local *F;
+    open F, $file or die "file $file not found";
+
+    my $lineno = 0; foreach (<F>) { $lineno++;
+	s/\s+$//;
+	/^#/ and next;
+	/^$/ and next;
+	/^END/ and last;
+
+	my ($cmd, $val) = /(\S+)\s*(.*)/ or log::l("bad line $lineno ($_)"), next;
+
+	my $f = $ {{ 
+	    LINE => sub { push @{$card->{lines}}, $val unless $val eq "VideoRam" },
+	    NAME => sub {
+		$cards{$card->{type}} = $card if $card;
+		$card = { type => $val };
+	    },
+	    SEE => sub {
+		my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
+    
+		push @{$card->{lines}}, @{$c->{lines} || []};
+		add2hash($card->{flags}, $c->{flags});
+		add2hash($card, $c);
+	    },
+	    CHIPSET => sub { $card->{chipset} = $val; 
+			     $card->{flags}->{needVideoRam} if member($val, qw(RIVA128));
+			 },
+	    SERVER => sub { $card->{server} = $val; },
+	    RAMDAC => sub { $card->{ramdac} = $val; },
+	    DACSPEED => sub { $card->{dacspeed} = $val; },
+	    CLOCKCHIP => sub { $card->{clockchip} = $val; $card->{flags}->{noclockprobe} = 1; },
+	    NOCLOCKPROBE => sub { $card->{flags}->{noclockprobe} = 1 },
+	    UNSUPPORTED => sub { $card->{flags}->{unsupported} = 1 },
+	}}{$cmd};
+
+	$f ? &$f() : log::l("unknown line $lineno ($_)");
+    }
+    push @{$cards{S3}->{lines}}, $s3_comment;
+    push @{$cards{'CL-GD'}->{lines}}, $cirrus_comment;
+
+    # this entry is broken in X11R6 cards db 
+    $cards{I128}->{flags}->{noclockprobe} = 1;
+
+    %cards;
+}
+
+sub readMonitorsDB {
+    my ($file) = @_;
+    my %monitors;
+
+    local *F;
+    open F, $file or die "can't open monitors database ($file): ?!";
+    my $lineno = 0; foreach (<F>) {
+	$lineno++;
+	s/\s+$//;
+	/^#/ and next;
+	/^$/ and next;
+
+	my @fields = qw(type bandwidth hsyncrange vsyncrange);
+	my @l = split /\s*;\s*/;
+	@l == @fields or log::l("bad line $lineno ($_)"), next;
+	
+	my %l; @l{@fields} = @l;
+	$monitors{$l{type}} = \%l;
+    }
+    while (my ($k, $v) = each %standard_monitors) {
+	$monitors{$k} = 
+	  $monitors{$v->[0]} = 
+	    { hsyncrange => $v->[1], vsyncrange => $v->[2] };
+    }
+    %monitors;
+}
+
+sub rewriteInittab {
+    my ($runlevel) = @_;
+    {
+	local (*F, *G);
+	open F, "/etc/inittab" or die "cannot open /etc/inittab: $!";
+	open G, "> /etc/inittab-" or die "cannot write in /etc/inittab-: $!";
+    
+	foreach (<F>) {
+	    print G /^id:/ ? "id:$runlevel:initdefault:\n" : $_;
+	}
+    }
+    unlink("/etc/inittab");
+    rename("/etc/inittab-", "/etc/inittab");
+}
+
+sub findLegalModes {
+    my ($card) = @_;
+    my $mem = $card->{memory} || 1000000;
+
+    foreach (@resolutions) {
+	my ($h, $v) = split 'x';
+	
+	foreach $_ (@depths) {
+	    push @{$card->{depth}->{$_}}, [ $h, $v ] if 1024 * $mem >= $h * $v * $_ / 8;
+	}
+    }
+}
+
+sub cardConfigurationAuto() {
+    my $card;
+    if (my ($c) = pci_probing::main::probe('video')) {
+	local $_;
+	($card->{identifier}, $_) = @$c;
+	$card->{type} = $1 if /Card:(.*)/;
+	$card->{server} = $1 if /Server:(.*)/;
+    }
+    $card;
+}
+
+sub cardConfiguration(;$) {
+    my $card = shift || {};
+
+    my %cards = readCardsDB("/usr/X11R6/lib/X11/Cards");
+
+    add2hash($card, cardConfigurationAuto()) unless $card->{type} || $card->{server} || $::expert;
+    add2hash($card, { type => $in->ask_from_list('', _("Choose a graphic card"), [keys %cards]) }) unless $card->{type} || $card->{server};
+    add2hash($card, $cards{$card->{type}}) if $card->{type};
+    add2hash($card, { vendor => "Unknown", board => "Unknown" });
+    $card;
+}
+
+sub monitorConfiguration(;$) {
+    my $monitor = shift || {};
+
+    my %monitors = readMonitorsDB("MonitorsDB");
+
+    add2hash($monitor, { type => $in->ask_from_list('', _("Choose a monitor"), [keys %monitors]) }) unless $monitor->{type};
+    add2hash($monitor, $monitors{$monitor->{type}});
+    add2hash($monitor, { vendor => "Unknown", model => "Unknown" });
+    $monitor;
+}
+
+sub testConfig($) {
+    my ($o) = @_;
+    my ($resolutions, $clocklines);
+
+    write_XF86Config($o, "/tmp/Xconfig");
+
+    local *F;
+    open F, "/etc/X11/X :9 -probeonly -pn -xf86config /tmp/Xconfig 2>&1 |";
+    foreach (<F>) {
+	#$videomemory = $2 if /(videoram|Video RAM):\s*(\d*)/;
+	# look for clocks
+	push @$clocklines, $1 if /clocks: (.*)/ && !/(pixel |num)clocks:/;
+
+	push @$resolutions, [ $1, $2 ] if /: Mode "(\d+)x(\d+)": mode clock/;
+    }
+    close F or die "X probeonly failed";
+
+    ($resolutions, $clocklines);
+}
+
+sub autoResolutions($) {
+    my ($o) = @_;
+    my $card = $o->{card};
+
+    my $hres_wanted = first(split 'x', $o->{resolution_wanted});
+
+    # For the mono and vga16 server, no further configuration is required.
+    return if member($card->{server}, "Mono", "VGA16");
+
+    # Configure the modes order.
+    my ($ok, $best);
+    foreach (@depths) {
+	local $card->{default_depth} = $_;
+
+	my ($resolutions, $clocklines) = eval { testConfig($o) };
+	if ($@) {
+	    delete $card->{depth}->{$_};
+	} else {
+	    $card->{clocklines} ||= $clocklines unless $card->{flags}->{noclockprobe};
+	    $card->{depth}->{$_} = $resolutions;
+
+	    $ok ||= $resolutions;
+	    my ($b) = sort { $b->[0] <=> $a->[0] } @$resolutions;
+
+	    # require $resolution_wanted, no matter what bpp this requires
+	    $best = $_ if $b->[0] >= $hres_wanted;
+	}
+    }
+    $ok or die "no valid modes";
+
+    $card->{default_depth} = $best;
+}
+
+
+sub moreCardConfiguration {
+    my ($o) = @_;
+    my $card = $o->{card};
+
+    $card->{vendor} ||= "Unknown";
+    $card->{model} ||= "Unknown";
+
+    unless ($card->{type}) {
+	$card->{flags}->{noclockprobe} = member($card->{server}, qw(I128 S3 S3V Mach64));
+    }
+
+    my $manual;
+    # some of these guys hate to be poked               
+    # if we dont know then its at the user's discretion
+    #my $manual = 
+    #  $card->{server} =~ /^(TGA|Mach32)/ || 
+    #  $card->{name} =~ /^Riva 128/ ||
+    #  $card->{chipset} =~ /^(RIVA128|mgag)/ ||
+    #  $::expert;
+    #
+    #my $unknown = 
+    #  member($card->{server}, qw(S3 S3V I128 Mach64)) ||
+    #  member($card->{type}, 
+    #	      "Matrox Millennium (MGA)",
+    #	      "Matrox Millennium II",
+    #	      "Matrox Millennium II AGP",
+    #	      "Matrox Mystique",
+    #	      "Matrox Mystique",
+    #	      "S3",
+    #	      "S3V",
+    #	      "I128",
+    #	     ) ||
+    #  $card->{type} =~ /S3 ViRGE/;
+    #
+    #$unknown and $manual ||= !$in->ask_okcancel('', [ _("I can try to autodetect information about graphic card, but it may freeze :("),
+    #						       _("Do you want to try?") ]);
+    
+    $card->{flags}->{needVideoRam} and
+      $card->{memory} ||= 
+	$videomemory{$in->ask_from_list_('', 
+					 _("Give your graphic card memory size"), 
+					 [ sort { $videomemory{$a} <=> $videomemory{$b} } 
+					   keys %videomemory])};
+
+    findLegalModes($o->{card});
+
+    unless ($manual || $::expert) {
+	# swith to virtual console 1 (hopefully not X :)
+	my $vt = setVirtual(1);
+
+	autoMemoryAndClocksline($o);
+	autoResolutions($o);
+
+	# restore the virtual console
+	setVirtual($vt);
+    }
+}
+
+
+# * Create the XF86Config file. 
+sub write_XF86Config {
+    my ($o, $file) = @_;
+    my $O;
+
+    local *F;
+    open F, ">$file" or die "can't write XF86Config in $file: $!";
+
+    print F $XF86firstchunk_text;
+
+    # Write keyboard section.     
+    $O = $o->{keyboard};
+    print F $keyboardsection_start;
+
+    print F "    RightAlt        ", ($O->{altmeta} ? "ModeShift" : "Meta"), "\n";
+    print F $keyboardsection_part2;
+    print F qq(    XkbLayout       "$O->{xkb_keymap}"\n);
+    print F $keyboardsection_end;
+
+    # Write pointer section.     
+    $O = $o->{mouse};
+    print F $pointersection_text1;
+    print F qq(    Protocol    "$O->{type}"\n);
+    print F qq(    Device      "$O->{device}"\n);
+    # this will enable the "wheel" or "knob" functionality if the mouse supports it 
+    print F "    ZAxisMapping 4 5\n" if
+      member($O->{type}, qw(IntelliMouse IMPS/2 ThinkingMousePS/2 NetScrollPS/2 NetMousePS/2 MouseManPlusPS/2));
+
+    print F $pointersection_text2;
+    print F "#" unless $O->{emulate3buttons};
+    print F "    Emulate3Buttons\n";
+    print F "#" unless $O->{emulate3buttons};
+    print F "    Emulate3Timeout    50\n\n";
+    print F "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
+    print F "#" unless $O->{chordmiddle};
+    print F "    ChordMiddle\n\n";
+    print F "    ClearDTR\n" if $O->{cleardtrrts};
+    print F "    ClearRTS\n\n"  if $O->{cleardtrrts};
+    print F "EndSection\n\n\n";
+
+    # Write monitor section.     
+    $O = $o->{monitor};
+    print F $monitorsection_text1;
+    print F qq(    Identifier "$O->{type}"\n);
+    print F qq(    VendorName "$O->{vendor}"\n);
+    print F qq(    ModelName  "$O->{model}"\n);
+    print F "\n";
+    print F $monitorsection_text2;
+    print F qq(    HorizSync  $O->{hsyncrange}\n);
+    print F "\n";
+    print F $monitorsection_text3;
+    print F qq(    VertRefresh $O->{vsyncrange}\n);
+    print F "\n";
+    print F $monitorsection_text4;
+    print F ($o->{card}->{type} eq "TG 96" ? 
+	     $modelines_text_Trident_TG_96xx :
+	     $modelines_text);
+    print F "EndSection\n\n\n";
+
+    # Write Device section.     
+    $O = $o->{card};
+    print F $devicesection_text;
+    print F qq(Section "Device"\n);
+    print F qq(    Identifier  "$O->{type}"\n);
+    print F qq(    VendorName  "$O->{vendor}"\n);
+    print F qq(    BoardName   "$O->{board}"\n);
+
+    print F "#" if $O->{memory} && !$O->{flags}->{needVideoRam};
+    print F "    VideoRam    $O->{memory}\n" if $O->{memory};
+
+    print F map { "    $_\n" } @{$O->{lines}};
+
+    print F qq(    Ramdac      "$O->{ramdac}"\n) if $O->{ramdac};
+    print F qq(    Dacspeed    "$O->{dacspeed}"\n) if $O->{dacspeed};
+
+    if ($O->{clockchip}) {
+	print F qq(    Clockchip   "$O->{clockchip}"\n);
+    } else {
+	print F "    # Clock lines\n";
+	print F "    Clocks $_\n" foreach (@{$O->{clocklines}});
+    }
+    print F "EndSection\n\n\n";
+
+    # Write Screen sections.     
+    print F $screensection_text1;
+
+    my $screen = sub {
+	my ($server, $defdepth, $device, $depths) = @_;
+	print F qq(
+
+Section "Screen"
+    Driver "$server"
+    Device      "$device"
+    Monitor     "$o->{monitor}->{type}"
+);
+	print F "    DefaultColorDepth $defdepth\n" if $defdepth;
+
+        foreach (sort { $a <=> $b } keys %$depths) {
+	    my $m = join(" ", 
+			 map { '"' . join("x", @$_) . '"' }
+			 sort { $b->[0] <=> $a->[0] } @{$depths->{$_}});
+	    print F qq(    Subsection "Display"\n);
+	    print F qq(        Depth       $_\n) if $_;
+	    print F qq(        Modes       $m\n);
+	    print F qq(        ViewPort    0 0\n);
+	    print F qq(    EndSubsection\n);
+	}
+	print F "EndSection\n";
+    };
+    
+    # SVGA screen section.
+    print F qq(
+# The Colour SVGA server
+);
+
+    if ($O->{server} eq 'SVGA') {
+	&$screen("svga", $O->{default_depth}, $O->{type}, $O->{depth});
+    } else {
+	&$screen("svga", '', "Generic VGA", { 8 => [[ 320, 200 ]] });
+    }
+
+    &$screen("vga16", '',
+	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"), 
+	     { '' => [[ 640, 480 ], [ 800, 600 ]]});
+
+    &$screen("vga2", '',
+	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"), 
+	     { '' => [[ 640, 480 ], [ 800, 600 ]]});
+
+    &$screen("accel", $O->{default_depth}, $O->{type}, $O->{depth});
+}
+
+sub XF86check_link {
+    my ($void) = @_;
+
+    my $f = "/etc/X11/XF86Config";
+    touch($f);
+
+    my $l = "/usr/X11R6/lib/X11/XF86Config";
+
+    if (-e $l && (stat($f))[1] != (stat($l))[1]) { # compare the inode, must be the sames
+	-e $l and unlink($l) || die "can't remove bad $l";
+	symlink "../../../../etc/X11/XF86Config", $l;
+    }
+}
+
+# * Program entry point. 
+sub main {
+    my ($default, $interact) = @_;
+    my $o = $default;
+    $in = $interact;
+
+    $o->{resolution_wanted} ||= $resolution_wanted;
+    
+    XF86check_link();
+
+    $o->{card} = cardConfiguration($o->{card});
+
+    unless ($::testing) {
+	my $prog = "/usr/X11R6/bin/XF86_$o->{card}->{server}";
+	-x $prog or die "server $o->{card}->{server} is not available (should be in $prog)";
+	unlink("/etc/X11/X");
+	symlink("../../$prog", "/etc/X11/X");
+    }
+
+    $o->{monitor} = monitorConfiguration($o->{monitor});
+
+    moreCardConfiguration($o);
+
+    write_XF86Config($o, "/tmp/Xconfig");
+
+    # Success 
+    rewriteInittab(rc & STARTX ? 5 : 3);
+}
diff --git a/perl-install/Xconfigurator_consts.pm b/perl-install/Xconfigurator_consts.pm
new file mode 100644
index 000000000..976f65d9e
--- /dev/null
+++ b/perl-install/Xconfigurator_consts.pm
@@ -0,0 +1,553 @@
+use common qw(:common);
+
+%keymap_translate = (
+    uk => "gb", 
+);
+
+@depths = qw(8 15 16 24 32);
+
+$resolution_wanted = "1024x768";
+@resolutions = qw(640x480 800x600 1024x768 1152x864 1280x1024 1600x1200);
+
+
+@accelservers = qw(S3 Mach32 Mach8 8514 P9000 AGX W32 Mach64 I128 S3V 3DLabs);
+@allservers = (qw(Mono VGA16 SVGA), @accelservers);
+
+%videomemory = (
+    __("256 kb") => 256, 
+    __("512 kb") => 512, 
+    __("1 mb") => 1024, 
+    __("2 mb") => 2048, 
+    __("4 mb") => 4096, 
+    __("8 mb") => 8192,
+    __("16 mb or more") => 16384,
+);
+
+%standard_monitors = (
+  __("Standard VGA, 640x480 in 60 Hz")                             => [ '640x480@60',      "31.5"            , "60" ],
+  __("Super VGA, 800x600 in 56 Hz") 				   => [ '800x600@56',      "31.5-35.1"       , "55-60" ],
+  __("8514 Compatible, 1024x768 in 87 Hz interlaced (no 800x600)") => [ '8514 compatible', "31.5,35.5"       , "60,70,87" ],
+  __("Super VGA, 1024x768 in 87 Hz interlaced, 800x600 in 56 Hz")  => [ '1024x768@87i',    "31.5,35.15,35.5" , "55-90" ],
+  __("Extended Super VGA, 800x600 in 60 Hz, 640x480 in 72 Hz")     => [ '800x600@60',      "31.5-37.9"       , "55-90" ],
+  __("Non-Interlaced SVGA, 1024x768 in 60 Hz, 800x600 in 72 Hz")   => [ '1024x768@60',     "31.5-48.5"       , "55-90" ],
+  __("High Frequency SVGA, 1024x768 in 70 Hz") 		           => [ '1024x768@70',     "31.5-57.0"       , "50-90" ],
+  __("Multi-frequency that can do 1280x1024 in 60 Hz") 	           => [ '1280x1024@60',    "31.5-64.3"       , "50-90" ],
+  __("Multi-frequency that can do 1280x1024 in 74 Hz") 	           => [ '1280x1024@74',    "31.5-79.0"       , "50-100" ],
+  __("Multi-frequency that can do 1280x1024 in 76 Hz") 	           => [ '1280x1024@76',    "31.5-82.0"       , "40-100" ],
+  __("Monitor that can do 1600x1200 in 70 Hz")                     => [ '1600x1200@70',    "31.5-88.0"       , "50-120" ],
+  __("Monitor that can do 1600x1200 in 76 Hz")		           => [ '1600x1200@76',    "31.5-94.0"       , "50-160" ],
+);
+
+# * Screen/video card configuration. 
+%ramdacs = (
+    __("No RAMDAC Setting (recommended)")               => '',
+    __("AT&T 20C490 (S3 and AGX servers, ARK driver)"), => 'att20c490',
+    __("AT&T 20C498/21C498/22C498 (S3, autodetected)"),	=> 'att20c498',
+    __("AT&T 20C409/20C499 (S3, autodetected)"),	=> 'att20c409',
+    __("AT&T 20C505 (S3)"),				=> 'att20c505',
+    __("BrookTree BT481 (AGX)"),			=> 'bt481',
+    __("BrookTree BT482 (AGX)"),			=> 'bt482',
+    __("BrookTree BT485/9485 (S3)"),			=> 'bt485',
+    __("Sierra SC15025 (S3, AGX)"),			=> 'sc15025',
+    __("S3 GenDAC (86C708) (autodetected)"),		=> 's3gendac',
+    __("S3 SDAC (86C716) (autodetected)"),		=> 's3_sdac',
+    __("STG-1700 (S3, autodetected)"),			=> 'stg1700',
+    __("STG-1703 (S3, autodetected)"),			=> 'stg1703',
+    __("TI 3020 (S3)"),					=> 'ti3020',
+    __("TI 3025 (S3, autodetected)"),			=> 'ti3025',
+    __("TI 3026 (S3, autodetected)"),			=> 'ti3026',
+    __("IBM RGB 514 (S3, autodetected)"),		=> 'ibm_rgb514',
+    __("IBM RGB 524 (S3, autodetected)"),		=> 'ibm_rgb524',
+    __("IBM RGB 525 (S3, autodetected)"),		=> 'ibm_rgb525',
+    __("IBM RGB 526 (S3)"),				=> 'ibm_rgb526',
+    __("IBM RGB 528 (S3, autodetected)"),		=> 'ibm_rgb528',
+    __("ICS5342 (S3, ARK)"),				=> 'ics5342',
+    __("ICS5341 (W32)"),				=> 'ics5341',
+    __("IC Works w30C516 ZoomDac (ARK)"),		=> 'zoomdac',
+    __("Normal DAC"),					=> 'normal',
+);
+
+@clockchip_name = (
+    __("No Clockchip Setting (recommended)")                         => '',
+    __("Chrontel 8391")                                              => 'ch8391',
+    __("ICD2061A and compatibles (ICS9161A => DCS2824)")	     => 'icd2061a',
+    __("ICS2595")                                                    => 'ics2595',
+    __("ICS5342 (similar to SDAC, but not completely compatible)")   => 'ics5342',
+    __("ICS5341")						     => 'ics5341',
+    __("S3 GenDAC (86C708) and ICS5300 (autodetected)")	             => 's3gendac',
+    __("S3 SDAC (86C716)")					     => 's3_sdac',
+    __("STG 1703 (autodetected)")				     => 'stg1703',
+    __("Sierra SC11412")					     => 'sc11412',
+    __("TI 3025 (autodetected)")				     => 'ti3025',
+    __("TI 3026 (autodetected)")				     => 'ti3026',
+    __("IBM RGB 51x/52x (autodetected)")			     => 'ibm_rgb5xx',
+);
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+$intro_text = "
+This program will create a basic XF86Config file, based on menu selections you make.
+
+The XF86Config file usually resides in /usr/X11R6/lib/X11 or /etc/X11. A 
+sample XF86Config file is supplied with XFree86; it is configured for a 
+standard VGA card and monitor with 640x480 resolution. 
+
+You can either take the sample XF86Config as a base and edit it for your 
+configuration, or let this program produce a base XF86Config file for your 
+configuration and fine-tune it. Refer to /usr/X11R6/lib/X11/doc/README.Config 
+for a detailed overview of the configuration process. 
+
+For accelerated servers (including accelerated drivers in the SVGA server), 
+there are many chipset and card-specific options and settings. This program 
+does not know about these. On some configurations some of these settings must 
+be specified. Refer to the server man pages and chipset-specific READMEs. 
+
+Before continuing with this program, make sure you know the chipset and 
+amount of video memory on your video card. SuperProbe can help with this.  
+It is also helpful if you know what server you want to run.";
+
+$finalcomment_text = "
+configuration file has been written. Take a look at it before running 'startx'.
+Note that the XF86Config file must be in one of the directories searched by the
+server (e.g. /etc/X11/XF86Config) in order to be used. Within the server press
+ctrl, alt and '+' simultaneously to cycle video resolutions. Pressing ctrl, alt
+and backspace simultaneously immediately exits the server (use if the monitor
+doesn't sync for a particular mode).
+
+For further configuration, refer to /usr/X11R6/lib/X11/doc/README.Config.
+";
+
+$s3_comment = '
+# Use Option "nolinear" if the server doesn\'t start up correctly
+# (this avoids the linear framebuffer probe). If that fails try
+# option \"nomemaccess\".
+#
+# Refer to /usr/X11R6/lib/doc/README.S3, and the XF86_S3 man page.
+';
+
+$cirrus_comment = '
+# Use Option \"no_bitblt\" if you have graphics problems. If that fails
+# try Option \"noaccel\".
+# Refer to /usr/X11R6/lib/doc/README.cirrus.
+# To allow linear addressing, uncomment the Option line and the
+# address that the card maps the framebuffer to.
+';
+
+$probeonlywarning_text = '
+It is possible that the hardware detection routines in the server some how 
+cause the system to crash and the screen to remain blank. If this is the 
+case, skip this step the next time. The server may need a 
+Ramdac, ClockChip or special option (e.g. "nolinear" for S3) to probe 
+and start-up correctly.
+';
+
+$monitorintro_text = __('
+Now we want to set the specifications of the monitor. The two critical 
+parameters are the vertical refresh rate, which is the rate at which the 
+the whole screen is refreshed, and most importantly the horizontal sync rate, 
+which is the rate at which scanlines are displayed.
+
+The valid range for horizontal sync and vertical sync should be documented 
+in the manual of your monitor. If in doubt, check the monitor database 
+/usr/X11R6/lib/X11/doc/Monitors to see if your monitor is there.
+');
+
+$hsyncintro_text = __('
+You must indicate the horizontal sync range of your monitor. You can either 
+select one of the predefined ranges below that correspond to industry-
+standard monitor types, or give a specific range.
+
+It is VERY IMPORTANT that you do not specify a monitor type with a horizontal 
+sync range that is beyond the capabilities of your monitor. If in doubt, 
+choose a conservative setting.
+');
+
+$vsyncintro_text = __('
+You must indicate the vertical sync range of your monitor. You can either 
+select one of the predefined ranges below that correspond to industry-
+standard monitor types, or give a specific range. For interlaced modes, 
+the number that counts is the high one (e.g. 87 Hz rather than 43 Hz).
+');
+
+$XF86firstchunk_text = '
+# File generated by XConfigurator.
+
+# **********************************************************************
+# Refer to the XF86Config(4/5) man page for details about the format of 
+# this file.
+# **********************************************************************
+
+# **********************************************************************
+# Files section.  This allows default font and rgb paths to be set
+# **********************************************************************
+
+Section "Files"
+
+# The location of the RGB database.  Note, this is the name of the
+# file minus the extension (like ".txt" or ".db").  There is normally
+# no need to change the default.
+
+    RgbPath	"/usr/X11R6/lib/X11/rgb"
+
+# Multiple FontPath entries are allowed (they are concatenated together)
+# By default, Red Hat 6.0 and later now use a font server independent of
+# the X server to render fonts.
+
+    FontPath   "unix/:-1"
+
+EndSection
+
+# **********************************************************************
+# Server flags section.
+# **********************************************************************
+
+Section "ServerFlags"
+
+    # Uncomment this to cause a core dump at the spot where a signal is 
+    # received.  This may leave the console in an unusable state, but may
+    # provide a better stack trace in the core dump to aid in debugging
+    #NoTrapSignals
+
+    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
+    # This allows clients to receive this key event.
+    #DontZap
+
+    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
+    # sequences.  This allows clients to receive these key events.
+    #DontZoom
+
+EndSection
+
+# **********************************************************************
+# Input devices
+# **********************************************************************
+';
+
+$keyboardsection_start = '
+# **********************************************************************
+# Keyboard section
+# **********************************************************************
+
+Section "Keyboard"
+
+    Protocol    "Standard"
+
+    # when using XQUEUE, comment out the above line, and uncomment the
+    # following line
+    #Protocol   "Xqueue"
+
+    AutoRepeat  500 5
+
+    # Let the server do the NumLock processing.  This should only be 
+    # required when using pre-R6 clients
+    #ServerNumLock
+
+    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
+    #Xleds      1 2 3
+
+    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
+    #RightCtl key to Compose, and ScrollLock key to ModeLock:
+
+    LeftAlt        Meta
+';
+
+$keyboardsection_part2 = '
+   ScrollLock      Compose
+   RightCtl        Control
+
+# To disable the XKEYBOARD extension, uncomment XkbDisable.
+
+#    XkbDisable
+
+# To customise the XKB settings to suit your keyboard, modify the
+# lines below (which are the defaults).  For example, for a non-U.S.
+# keyboard, you will probably want to use:
+#    XkbModel    "pc102"
+# If you have a US Microsoft Natural keyboard, you can use:
+#    XkbModel    "microsoft"
+#
+# Then to change the language, change the Layout setting.
+# For example, a german layout can be obtained with:
+#    XkbLayout   "de"
+# or:
+#    XkbLayout   "de"
+#    XkbVariant  "nodeadkeys"
+#
+# If you\'d like to switch the positions of your capslock and
+# control keys, use:
+#    XkbOptions  "ctrl:swapcaps"
+
+# These are the default XKB settings for XFree86
+#    XkbRules    "xfree86"
+#    XkbModel    "pc101"
+#    XkbLayout   "us"
+#    XkbVariant  ""
+#    XkbOptions  ""
+
+   XkbKeycodes     "xfree86"
+   XkbTypes        "default"
+   XkbCompat       "default"
+   XkbSymbols      "us(pc101)"
+   XkbGeometry     "pc"
+   XkbRules        "xfree86"
+   XkbModel        "pc101"
+';
+
+$keyboardsection_end = '
+EndSection
+';
+
+$pointersection_text1 = '
+# **********************************************************************
+# Pointer section
+# **********************************************************************
+
+Section "Pointer"
+';
+
+$pointersection_text2 = '
+
+# When using XQUEUE, comment out the above two lines, and uncomment
+# the following line.
+
+#    Protocol	"Xqueue"
+
+# Baudrate and SampleRate are only for some Logitech mice
+
+#    BaudRate	9600
+#    SampleRate	150
+
+# Emulate3Buttons is an option for 2-button Microsoft mice
+# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
+';
+
+$monitorsection_text1 = '
+# **********************************************************************
+# Monitor section
+# **********************************************************************
+
+# Any number of monitor sections may be present
+
+Section "Monitor"
+';
+
+$monitorsection_text2 = '
+# HorizSync is in kHz unless units are specified.
+# HorizSync may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR\'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
+';
+
+$monitorsection_text3 = '
+# VertRefresh is in Hz unless units are specified.
+# VertRefresh may be a comma separated list of discrete values, or a
+# comma separated list of ranges of values.
+# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR\'S
+# USER MANUAL FOR THE CORRECT NUMBERS.
+';
+
+$monitorsection_text4 = '
+# Modes can be specified in two formats.  A compact one-line format, or
+# a multi-line format.
+
+# These two are equivalent
+
+#    ModeLine "1024x768i" 45 1024 1048 1208 1264 768 776 784 817 Interlace
+
+#    Mode "1024x768i"
+#        DotClock	45
+#        HTimings	1024 1048 1208 1264
+#        VTimings	768 776 784 817
+#        Flags		"Interlace"
+#    EndMode
+';
+
+$modelines_text_Trident_TG_96xx = '
+# This is a set of standard mode timings. Modes that are out of monitor spec
+# are automatically deleted by the server (provided the HorizSync and
+# VertRefresh lines are correct), so there\'s no immediate need to
+# delete mode timings (unless particular mode timings don\'t work on your
+# monitor). With these modes, the best standard mode that your monitor
+# and video card can support for a given resolution is automatically
+# used.
+
+# These are special modelines for Trident Providia 9685. It is for VA Linux
+# systems only.
+# 640x480 @ 72 Hz, 36.5 kHz hsync
+Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
+# 800x600 @ 72 Hz, 48.0 kHz hsync
+Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
+# 1024x768 @ 60 Hz, 48.4 kHz hsync
+#Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
+# 1024x768 @ 70 Hz, 56.5 kHz hsync
+Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
+';
+$modelines_text = '
+# This is a set of standard mode timings. Modes that are out of monitor spec
+# are automatically deleted by the server (provided the HorizSync and
+# VertRefresh lines are correct), so there\'s no immediate need to
+# delete mode timings (unless particular mode timings don\'t work on your
+# monitor). With these modes, the best standard mode that your monitor
+# and video card can support for a given resolution is automatically
+# used.
+
+# 640x400 @ 70 Hz, 31.5 kHz hsync
+Modeline "640x400"     25.175 640  664  760  800   400  409  411  450
+# 640x480 @ 60 Hz, 31.5 kHz hsync
+Modeline "640x480"     25.175 640  664  760  800   480  491  493  525
+# 800x600 @ 56 Hz, 35.15 kHz hsync
+ModeLine "800x600"     36     800  824  896 1024   600  601  603  625
+# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
+Modeline "1024x768"    44.9  1024 1048 1208 1264   768  776  784  817 Interlace
+
+# 640x400 @ 85 Hz, 37.86 kHz hsync
+Modeline "640x400"     31.5   640  672 736   832   400  401  404  445 -HSync +VSync
+# 640x480 @ 72 Hz, 36.5 kHz hsync
+Modeline "640x480"     31.5   640  680  720  864   480  488  491  521
+# 640x480 @ 75 Hz, 37.50 kHz hsync
+ModeLine  "640x480"    31.5   640  656  720  840   480  481  484  500 -HSync -VSync
+# 800x600 @ 60 Hz, 37.8 kHz hsync
+Modeline "800x600"     40     800  840  968 1056   600  601  605  628 +hsync +vsync
+
+# 640x480 @ 85 Hz, 43.27 kHz hsync
+Modeline "640x480"     36     640  696  752  832   480  481  484  509 -HSync -VSync
+# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
+ModeLine "1152x864"    65    1152 1168 1384 1480   864  865  875  985 Interlace
+
+# 800x600 @ 72 Hz, 48.0 kHz hsync
+Modeline "800x600"     50     800  856  976 1040   600  637  643  666 +hsync +vsync
+# 1024x768 @ 60 Hz, 48.4 kHz hsync
+Modeline "1024x768"    65    1024 1032 1176 1344   768  771  777  806 -hsync -vsync
+
+# 640x480 @ 100 Hz, 53.01 kHz hsync
+Modeline "640x480"     45.8   640  672  768  864   480  488  494  530 -HSync -VSync
+# 1152x864 @ 60 Hz, 53.5 kHz hsync
+Modeline  "1152x864"   89.9  1152 1216 1472 1680   864  868  876  892 -HSync -VSync
+# 800x600 @ 85 Hz, 55.84 kHz hsync
+Modeline  "800x600"    60.75  800  864  928 1088   600  616  621  657 -HSync -VSync
+
+# 1024x768 @ 70 Hz, 56.5 kHz hsync
+Modeline "1024x768"    75    1024 1048 1184 1328   768  771  777  806 -hsync -vsync
+# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
+Modeline "1280x1024"   80    1280 1296 1512 1568  1024 1025 1037 1165 Interlace
+
+# 800x600 @ 100 Hz, 64.02 kHz hsync
+Modeline  "800x600"    69.65  800  864  928 1088   600  604  610  640 -HSync -VSync
+# 1024x768 @ 76 Hz, 62.5 kHz hsync
+Modeline "1024x768"    85    1024 1032 1152 1360   768  784  787  823
+# 1152x864 @ 70 Hz, 62.4 kHz hsync
+Modeline  "1152x864"   92    1152 1208 1368 1474   864  865  875  895
+# 1280x1024 @ 61 Hz, 64.2 kHz hsync
+Modeline "1280x1024"  110    1280 1328 1512 1712  1024 1025 1028 1054
+
+# 1024x768 @ 85 Hz, 70.24 kHz hsync
+Modeline "1024x768"   98.9  1024 1056 1216 1408   768 782 788 822 -HSync -VSync
+# 1152x864 @ 78 Hz, 70.8 kHz hsync
+Modeline "1152x864"   110   1152 1240 1324 1552   864  864  876  908
+
+# 1280x1024 @ 70 Hz, 74.59 kHz hsync
+Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024 1032 1040 1068 -HSync -VSync
+# 1600x1200 @ 60Hz, 75.00 kHz hsync
+Modeline "1600x1200"  162   1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
+# 1152x864 @ 84 Hz, 76.0 kHz hsync
+Modeline "1152x864"   135    1152 1464 1592 1776   864  864  876  908
+
+# 1280x1024 @ 74 Hz, 78.85 kHz hsync
+Modeline "1280x1024"  135    1280 1312 1456 1712  1024 1027 1030 1064
+
+# 1024x768 @ 100Hz, 80.21 kHz hsync
+Modeline "1024x768"   115.5  1024 1056 1248 1440  768  771  781  802 -HSync -VSync
+# 1280x1024 @ 76 Hz, 81.13 kHz hsync
+Modeline "1280x1024"  135    1280 1312 1416 1664  1024 1027 1030 1064
+
+# 1600x1200 @ 70 Hz, 87.50 kHz hsync
+Modeline "1600x1200"  189    1600 1664 1856 2160  1200 1201 1204 1250 -HSync -VSync
+# 1152x864 @ 100 Hz, 89.62 kHz hsync
+Modeline "1152x864"   137.65 1152 1184 1312 1536   864  866  885  902 -HSync -VSync
+# 1280x1024 @ 85 Hz, 91.15 kHz hsync
+Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024 1025 1028 1072 +HSync +VSync
+# 1600x1200 @ 75 Hz, 93.75 kHz hsync
+Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200 1201 1204 1250 +HSync +VSync
+# 1600x1200 @ 85 Hz, 105.77 kHz hsync
+Modeline "1600x1200"  220    1600 1616 1808 2080  1200 1204 1207 1244 +HSync +VSync
+# 1280x1024 @ 100 Hz, 107.16 kHz hsync
+Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024 1031 1046 1072 -HSync -VSync
+
+# 1800x1440 @ 64Hz, 96.15 kHz hsync 
+ModeLine "1800X1440"  230    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
+# 1800x1440 @ 70Hz, 104.52 kHz hsync 
+ModeLine "1800X1440"  250    1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
+
+# 512x384 @ 78 Hz, 31.50 kHz hsync
+Modeline "512x384"    20.160 512  528  592  640   384  385  388  404 -HSync -VSync
+# 512x384 @ 85 Hz, 34.38 kHz hsync
+Modeline "512x384"    22     512  528  592  640   384  385  388  404 -HSync -VSync
+
+# Low-res Doublescan modes
+# If your chipset does not support doublescan, you get a \'squashed\'
+# resolution like 320x400.
+
+# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
+Modeline "320x200"     12.588 320  336  384  400   200  204  205  225 Doublescan
+# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
+Modeline "320x240"     12.588 320  336  384  400   240  245  246  262 Doublescan
+# 320x240 @ 72 Hz, 36.5 kHz hsync
+Modeline "320x240"     15.750 320  336  384  400   240  244  246  262 Doublescan
+# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
+ModeLine "400x300"     18     400  416  448  512   300  301  302  312 Doublescan
+# 400x300 @ 60 Hz, 37.8 kHz hsync
+Modeline "400x300"     20     400  416  480  528   300  301  303  314 Doublescan
+# 400x300 @ 72 Hz, 48.0 kHz hsync
+Modeline "400x300"     25     400  424  488  520   300  319  322  333 Doublescan
+# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
+ModeLine "480x300"     21.656 480  496  536  616   300  301  302  312 Doublescan
+# 480x300 @ 60 Hz, 37.8 kHz hsync
+Modeline "480x300"     23.890 480  496  576  632   300  301  303  314 Doublescan
+# 480x300 @ 63 Hz, 39.6 kHz hsync
+Modeline "480x300"     25     480  496  576  632   300  301  303  314 Doublescan
+# 480x300 @ 72 Hz, 48.0 kHz hsync
+Modeline "480x300"     29.952 480  504  584  624   300  319  322  333 Doublescan
+
+';
+
+$devicesection_text = '
+# **********************************************************************
+# Graphics device section
+# **********************************************************************
+
+# Any number of graphics device sections may be present
+
+Section "Device"
+    Identifier        "Generic VGA"
+    VendorName        "Unknown"
+    BoardName "Unknown"
+    Chipset   "generic"
+
+#    VideoRam 256
+
+#    Clocks   25.2 28.3
+
+EndSection
+
+# Device configured by Xconfigurator:
+';
+
+$screensection_text1 = '
+# **********************************************************************
+# Screen sections
+# **********************************************************************
+';
+
diff --git a/perl-install/common.pm b/perl-install/common.pm
index ce4d599e9..ec8f92366 100644
--- a/perl-install/common.pm
+++ b/perl-install/common.pm
@@ -6,8 +6,9 @@ use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK $printable_chars $sizeof_int $bitof_int
 
 @ISA = qw(Exporter);
 %EXPORT_TAGS = (
-    common => [ qw(_ __ min max bool member divide is_empty_array_ref set_new set_add round_up round_down first second top uniq translate untranslate) ],
-    file => [ qw(dirname basename all glob_ cat_ chop_ mode) ],
+    common => [ qw(_ __ min max sum bool member divide is_empty_array_ref add2hash set_new set_add round_up round_down first second top uniq translate untranslate) ],
+    functional => [ qw(fold_left) ],
+    file => [ qw(dirname basename touch all glob_ cat_ chop_ mode) ],
     system => [ qw(sync makedev unmakedev psizeof strcpy gettimeofday syscall_ crypt_) ],
     constant => [ qw($printable_chars $sizeof_int $bitof_int $SECTORSIZE) ],
 );
@@ -22,12 +23,14 @@ $SECTORSIZE = 512;
 
 sub _ { my $s = shift @_; sprintf translate($s), @_ }
 sub __ { $_[0] }
-sub min { my $min = shift; grep { $_ < $min and $min = $_; } @_; $min }
-sub max { my $max = shift; grep { $_ > $max and $max = $_; } @_; $max }
+sub min { fold_left(sub { $a < $b ? $a : $b }, @_) }
+sub max { fold_left(sub { $a > $b ? $a : $b }, @_) }
+sub sum { fold_left(sub { $a + $b }, @_) }
 sub first { $_[0] }
 sub second { $_[1] }
 sub top { $_[$#_] }
 sub uniq { my %l; @l{@_} = (); keys %l }
+sub add2hash { my ($a, $b) = @_; while (my ($k, $v) = each %{$b || {}}) { $a->{$k} ||= $v } }
 sub member { my $e = shift; foreach (@_) { $e eq $_ and return 1 } 0 }
 sub dirname { @_ == 1 or die "usage: dirname <name>\n"; local $_ = shift; s|[^/]*/*\s*$||; s|(.)/*$|$1|; $_ || '.' }
 sub basename { @_ == 1 or die "usage: basename <name>\n"; local $_ = shift; s|/*\s*$||; s|.*/||; $_ }
@@ -50,6 +53,24 @@ sub remove_spaces { local $_ = shift; s/^ +//; s/ +$//; $_ }
 sub mode { my @l = stat $_[0] or die "unable to get mode of file $_[0]: $!\n"; $l[2] }
 sub psizeof { length pack $_[0] }
 
+sub touch {
+    my $f = shift;
+    unless (-e $f) {
+	local *F;
+	open F, ">$f";
+    }
+    my $now = time;
+    utime $now, $now, $f;
+}
+
+sub fold_left(&$@) {
+    my $f = shift;
+    local $a = shift;
+    foreach $b (@_) { $a = &$f() }
+    $a
+}
+
+
 sub all {
     my $d = shift;
 
@@ -89,7 +110,7 @@ sub unmakedev { $_[0] >> 8, $_[0] & 0xff }
 sub translate {
     my ($s) = @_;
     unless (defined %po::I18N::I18N) {
-	if (my ($lang) = ($ENV{LC_ALL} || $ENV{LANGUAGE} || $ENV{LC_MESSAGES} || $ENV{LANG}) =~ /(..)/) {
+	if (my ($lang) = substr($ENV{LC_ALL} || $ENV{LANGUAGE} || $ENV{LC_MESSAGES} || $ENV{LANG} || '', 0, 2)) {
 	    local $SIG{__DIE__} = 'none';
 	    eval { require "po/$lang.pm" };
 	}
diff --git a/perl-install/detect_devices.pm b/perl-install/detect_devices.pm
index 6cc170368..d226d033b 100644
--- a/perl-install/detect_devices.pm
+++ b/perl-install/detect_devices.pm
@@ -40,7 +40,7 @@ sub hasSCSI() {
     log::l("scsi devices are available");
     $scsiDeviceAvailable = 1;
 }
-sub hasIDE() { 1 }
+sub hasIDE() { -e "/proc/ide" }
 sub hasDAC960() { 1 }
 
 sub hasCompaqSmartArray() {
@@ -82,8 +82,6 @@ sub getSCSI() {
 sub getIDE() {
     my @idi;
 
-    -r "/proc/ide" or die "sorry, /proc/ide not available, seems like you have a pre-2.2 kernel\n => not handled yet :(";
-
     # Great. 2.2 kernel, things are much easier and less error prone. 
     foreach my $d (glob_('/proc/ide/hd*')) {
 	my ($t) = chop_(cat_("$d/media"));
diff --git a/perl-install/install2.pm b/perl-install/install2.pm
index bb97fdbcf..13b587060 100644
--- a/perl-install/install2.pm
+++ b/perl-install/install2.pm
@@ -224,18 +224,9 @@ sub setupBootloader {
     $o->{isUpgrade} or modules::read_conf("$o->{prefix}/etc/conf.modules");
     $o->setupBootloader;
 }
+sub configureX { $o->setupXfree }
+sub exitInstall { $o->exitInstall }
 
-sub configureX { $o->setupXfree; }
-
-sub exitInstall { 
-    $o->warn( 
-_"Congratulations, installation is complete.
-Remove the boot media and press return to reboot.
-For information on fixes which are available for this release of Linux Mandrake,
-consult the Errata available from http://www.linux-mandrake.com/.
-Information on configuring your system is available in the post
-install chapter of the Official Linux Mandrake User's Guide.");
-}
 
 sub main {
     $SIG{__DIE__} = sub { chomp $_[0]; log::l("ERROR: $_[0]") };
@@ -271,8 +262,10 @@ sub main {
 
     for (my $step = $o->{steps}->{first}; $step ne 'done'; $step = getNextStep($step)) {
 	$o->enteringStep($step);
-	eval { &{$install2::{$step}}() };
-	$@ and $o->warn($@);
+	#eval { 
+	    &{$install2::{$step}}();
+	#};
+	$o->errorInStep($@) if $@;
 	$o->leavingStep($step);
     }
     killCardServices();
diff --git a/perl-install/install_any.pm b/perl-install/install_any.pm
index 8d38cddc6..938323350 100644
--- a/perl-install/install_any.pm
+++ b/perl-install/install_any.pm
@@ -26,7 +26,8 @@ sub imageGetFile {
 }
 
 sub versionString {
-    my $kernel = $::o->{packages}->{kernel} or die "I couldn't find the kernel package!";
+    my $kernel = $::o->{packages}->{kernel};
+    $kernel && $kernel->{header} or die "I couldn't find the kernel package!";
     
     c::headerGetEntry($kernel->{header}, 'version') . "-" .
     c::headerGetEntry($kernel->{header}, 'release');
diff --git a/perl-install/install_steps.pm b/perl-install/install_steps.pm
index b25997932..a80807c1b 100644
--- a/perl-install/install_steps.pm
+++ b/perl-install/install_steps.pm
@@ -22,8 +22,6 @@ my $o;
 1;
 
 
-sub warn {}
-
 sub new($$) {
     my ($type, $o_) = @_;
 
@@ -39,6 +37,8 @@ sub leavingStep($$) {
     log::l("step `$step' finished");
 }
 
+sub errorInStep($$) {}
+
 sub chooseLanguage($) {
     $o->{default}->{lang};
 }
diff --git a/perl-install/install_steps_stdio.pm b/perl-install/install_steps_stdio.pm
index 22e171c22..908d14080 100644
--- a/perl-install/install_steps_stdio.pm
+++ b/perl-install/install_steps_stdio.pm
@@ -4,78 +4,27 @@ use diagnostics;
 use strict;
 use vars qw(@ISA);
 
-@ISA = qw(install_steps);
+@ISA = qw(install_steps_interactive interactive_stdio);
 
 use common qw(:common);
-use partition_table qw(:types);
 use devices;
 use run_program;
-use install_steps;
+use interactive_stdio;
+use install_steps_interactive;
 use install_any;
-use diskdrake;
-use lang;
 use log;
 
 1;
 
 sub enteringStep($$$) {
     my ($o, $step) = @_;
-    print "Starting step `$o->{steps}->{$step}->{text}'\n";
+    print _("Starting step `%s'\n", $o->{steps}->{$step}->{text});
 }
 sub leavingStep {
     my ($o) = @_;
     print "--------\n";
 }
 
-sub chooseLanguage($) {
-    my $lang = lang::text2lang(ask_from_list("Language", # no use translating this
-					     "Which language do you want?",
-					     [ lang::list() ]));
-    run_program::run('xmodmap', "/usr/bin/$lang.map");
-    $lang;
-}
-
-sub selectInstallOrUpgrade($) {
-    ask_yesorno('Install/Upgrade', 'Do you want to upgrade an already installed Mandrake?');
-}
-
-sub selectInstallClass($@) {
-    my ($o, @classes) = @_;
-    my $c = ask_from_list(_("Install Class"),
-			  _("What type of user will you have?"),
-			  [ map { translate($_) } @classes ]);
-    untranslate($c, @classes);
-}
-
-sub rebootNeeded($) {
-    my ($o) = @_;
-    ask_warn('', "You need to reboot for the partition table modifications to take place");
-    $o->SUPER::rebootNeeded;
-}
-
-sub choosePartitionsToFormat($$) {
-    my ($o, $fstab) = @_;
-    my @l = grep { $_->{mntpoint} && (isExt2($_) || isSwap($_)) } @$fstab;
-    my @r = ask_many_from_list('', "Choose the partitions you want to format", 
-			       [ map { $_->{mntpoint} } @l ], 
-			       [ map { $_->{notFormatted} } @l ]);
-    for (my $i = 0; $i < @l; $i++) {
-	$l[$i]->{toFormat} = $r[$i];
-    }
-}
-
-sub choosePackages($$$) {
-    my ($o, $packages, $compss) = @_;
-    my @r = ask_many_from_list('',
-			       "Choose the packages you want to install",
-			       [ map { $_->{name} } @$compss ], 
-			       [ map { $_->{selected} } @$compss ]);
-    
-    for (my $i = 0; $i < @$compss; $i++) {
-	$compss->[$i]->{selected} = $r[$i];
-    }
-}
-
 sub installPackages {
     my $o = shift;
 
@@ -97,9 +46,9 @@ sub setRootPassword($) {
     my (%w);
     do {
 	$w{password} and print "You must enter the same password, please try again\n";
-	print "Password: "; $w{password} = readln(); 
+	print "Password: "; $w{password} = $o->readln(); 
 	print "Password (again for confirmation): "; 
-    } until ($w{password} eq readln());
+    } until ($w{password} eq $o->readln());
 
     $o->{default}->{rootPassword} = $w{password};
     $o->SUPER::setRootPassword;
@@ -109,91 +58,16 @@ sub addUser($) {
     my ($o) = @_;
     my %w;
     print "\nCreating a normal user account:\n";
-    print "Name: "; $w{name} = readln() or return;
+    print "Name: "; $w{name} = $o->readln() or return;
     do {
 	$w{password} and print "You must enter the same password, please try again\n";
-	print "Password: "; $w{password} = readln(); 
+	print "Password: "; $w{password} = $o->readln(); 
 	print "Password (again for confirmation): "; 
-    } until ($w{password} eq readln());
-    print "Real name: "; $w{realname} = readln();
+    } until ($w{password} eq $o->readln());
+    print "Real name: "; $w{realname} = $o->readln();
     
-    $w{shell} = ask_from_list('', 'Shell', $o->{default}->{shells});
+    $w{shell} = $o->ask_from_list('', 'Shell', $o->{default}->{shells}, "/bin/bash");
     
     $o->{default}->{user} = { map { $_ => $w{$_}->get_text } qw(name password realname shell) };
     $o->SUPER::addUser;
 }
-
-sub createBootdisk($) {
-    my ($o) = @_;
-    
-    $o->SUPER::createBootdisk if 
-	$o->{default}->{mkbootdisk} = ask_yesorno('',
-"A custom bootdisk provides a way of booting into your Linux system without
-depending on the normal bootloader. This is useful if you don't want to install
-lilo on your system, or another operating system removes lilo, or lilo doesn't
-work with your hardware configuration. A custom bootdisk can also be used with
-the Mandrake rescue image, making it much easier to recover from severe system
-failures. Would you like to create a bootdisk for your system?");
-}
-
-sub readln {
-    my $l = <STDIN>;
-    chomp $l;
-    $l;
-}
-
-sub ask_warn {
-    my ($title, @msgs) = @_;
-    warn(@msgs);
-}
-
-sub ask_yesorno {
-    my ($title, @msgs) = @_;
-    print join("\n", @_);
-    print " (yes/No) "; readln() =~ /y/i;
-
-}
-
-sub check_it {
-    my ($i, $n) = @_;
-    $i =~ /^\s*\d+\s*$/ && 1 <= $i && $i <= $n    
-}
-
-sub ask_from_list {
-    my ($title, @msgs) = @_;
-    my $list = pop @msgs;
-    print map { "$_\n" } @msgs;
-    my $n = 0; foreach (@$list) { $n++; print "$n: $_\n"; }
-    my $i;
-    do {
-	defined $i and print "Bad choice, try again\n";
-	print "Your choice? (1/$n) ";
-	$i = readln();
-    } until (check_it($i, $n));
-    $list->[$i - 1];
-}
-
-sub ask_many_from_list {
-    my ($title, @msgs) = @_;
-    my $default = pop @msgs;
-    my $list = pop @msgs;
-    my @defaults;
-    print map { "$_\n" } @msgs;
-    my $n = 0; foreach (@$list) { 
-	$n++; 
-	print "$n: $_\n"; 
-	push @defaults, $n if $default->[$n - 1];
-    }
-    my $i;
-    TRY_AGAIN:
-    defined $i and print "Bad choice, try again\n";
-    print "Your choice? (default ", join(',', @defaults), "  enter `none' for none) ";
-    $i = readln();
-    my @t = split ',', $i;
-    foreach (@t) { check_it($_, $n) or goto TRY_AGAIN }
-
-    my @rr = (0) x @$list;
-    $rr[$_ - 1] = 1 foreach @t;
-    @rr;
-}
-
diff --git a/perl-install/interactive.pm b/perl-install/interactive.pm
new file mode 100644
index 000000000..977adea5a
--- /dev/null
+++ b/perl-install/interactive.pm
@@ -0,0 +1,53 @@
+package interactive;
+
+use diagnostics;
+use strict;
+
+use common qw(:common);
+
+1;
+
+sub new($$) {
+    my ($type) = @_;
+
+    bless {}, ref $type || $type;
+}
+
+
+sub ask_warn($$$) {
+    my ($o, $title, $message) = @_;
+    ask_from_list($o, $title, $message, [ _("Ok") ]);
+}
+sub ask_yesorno($$$) {
+    my ($o, $title, $message) = @_;
+    ask_from_list_($o, $title, $message, [ __("Yes"), __("No") ]) eq "Yes";
+}
+sub ask_okcancel($$$) {
+    my ($o, $title, $message) = @_;
+    ask_from_list_($o, $title, $message, [ __("Ok"), __("Cancel") ]) eq "Ok";
+}
+sub ask_from_list_($$$$;$) {
+    my ($o, $title, $message, $l, $def) = @_;
+    untranslate(
+       ask_from_list($o, $title, $message, [ map { translate($_) } @$l ], translate($def)),
+       @$l);
+}
+sub ask_from_list($$$$;$) {
+    my ($o, $title, $message, $l, $def) = @_;
+
+    $message = ref $message ? $message : [ $message ];
+
+    @$l > 10 and $l = [ sort @$l ];
+
+    $o->ask_from_listW($title, $message, $l, $def || $l->[0]);
+}
+sub ask_many_from_list($$$$;$) {
+    my ($o, $title, $message, $l, $def) = @_;
+
+    $message = ref $message ? $message : [ $message ];
+
+    $o->ask_many_from_listW($title, $message, $l, $def);
+}
+
+
+
diff --git a/perl-install/interactive_gtk.pm b/perl-install/interactive_gtk.pm
new file mode 100644
index 000000000..935766470
--- /dev/null
+++ b/perl-install/interactive_gtk.pm
@@ -0,0 +1,37 @@
+package interactive_gtk;
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(interactive);
+
+use interactive;
+use common qw(:common);
+use my_gtk qw(:helpers :wrappers);
+
+1;
+
+sub ask_from_listW {
+    my ($o, $title, $messages, $l, $def) = @_;
+
+    if (@$l < 5 && sum(map { length $_ } @$l) < 70) {
+	my $w = my_gtk->new($title);
+	my $f = sub { $w->{retval} = $_[1]; Gtk->main_quit };
+	gtkadd($w->{window},
+	       gtkpack(create_box_with_title($o, @$messages),
+		       gtkadd(create_hbox(),
+			      map {
+				  my $b = new Gtk::Button($_);
+				  $b->signal_connect(clicked => [ $f, $_ ]);
+				  $_ eq $def and $def = $b;
+				  $b;
+			      } @$l),
+		       ),
+	       );
+	$def->grab_focus if $def;
+	$w->main;
+    } else {
+	my_gtk::ask_from_list($title, $messages, $l, $def);
+    }
+}
diff --git a/perl-install/interactive_stdio.pm b/perl-install/interactive_stdio.pm
new file mode 100644
index 000000000..40dcdbb7c
--- /dev/null
+++ b/perl-install/interactive_stdio.pm
@@ -0,0 +1,80 @@
+package interactive_stdio;
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(interactive);
+
+use interactive;
+use common qw(:common);
+
+1;
+
+sub readln {
+    my $l = <STDIN>;
+    chomp $l;
+    $l;
+}
+
+sub check_it {
+    my ($i, $n) = @_;
+    $i =~ /^\s*\d+\s*$/ && 1 <= $i && $i <= $n    
+}
+
+sub ask_from_listW {
+    my ($o, $title, $messages, $list, $def) = @_;
+    my $i;
+    print map { "$_\n" } @$messages;
+
+    if (@$list < 10 && sum(map { length $_ } @$list) < 50) {
+	my @l;
+	do {
+	    if (defined $i) {
+		@l ? print _("Ambiguity (%s) be more precise\n", join(", ", @l)) :
+		     print _("Bad choice, try again\n");
+	    }
+	    @$list == 1 ? print @$list :
+	                  print join("/", @$list), _(" ? (default %s) ", $def);
+	    $i = readln() || $def;
+	    @l = grep { /^$i/ } @$list;
+	} until (@l == 1);
+	$l[0];
+    } else {
+	my $n = 0; foreach (@$list) { 
+	    $n++;
+	    $def eq $_ and $def = $n;
+	    print "$n: $_\n"; 
+	}
+	do {
+	    defined $i and print _("Bad choice, try again\n");
+	    print _("Your choice? (default %s) ", $def);
+	    $i = readln() || $def;
+	} until (check_it($i, $n));
+	$list->[$i - 1];
+    }
+}
+
+sub ask_many_from_listW {
+    my ($o, $title, $messages, $list, $default) = @_;
+    my @defaults;
+    print map { "$_\n" } @$messages;
+    my $n = 0; foreach (@$list) { 
+	$n++; 
+	print "$n: $_\n"; 
+	push @defaults, $n if $default->[$n - 1];
+    }
+    my $i;
+    TRY_AGAIN:
+    defined $i and print _("Bad choice, try again\n");
+    print _("Your choice? (default %s  enter `none' for none) ", join(',', @defaults));
+    $i = readln();
+    my @t = split ',', $i;
+    foreach (@t) { check_it($_, $n) or goto TRY_AGAIN }
+
+    my @rr = (0) x @$list;
+    $rr[$_ - 1] = 1 foreach @t;
+    @rr;
+}
+
+
diff --git a/perl-install/keyboard.pm b/perl-install/keyboard.pm
index 2c6b84858..5b59bd2c3 100644
--- a/perl-install/keyboard.pm
+++ b/perl-install/keyboard.pm
@@ -86,7 +86,7 @@ sub read($) {
 
     foreach (<F>) {
 	($_) = /^KEYTABLE=(.*)/ or log::l("unrecognized entry in keyboard configuration file ($_)"), next;
-	s/\"//g; 
+	s/^\s*"(.*)"\s*$/$1/;
 	s/\.[^.]*//; # remove extension
 	return basename($_);
     }
diff --git a/perl-install/log.pm b/perl-install/log.pm
index 0fe696f07..640349b70 100644
--- a/perl-install/log.pm
+++ b/perl-install/log.pm
@@ -22,9 +22,9 @@ sub openLog(;$) {
     if ($_[0]) { # useLocal
 	open LOG, "> $_[0]" or die "no log possible :(";
     } else {
-	open LOG, "> /dev/tty3" or open LOG, ">> /tmp/install.log" or die "no log possible :(";
+	open LOG, "> /dev/tty3" or open LOG, ">> /tmp/install.log";# or die "no log possible :(";
     } 
-    open LOG2, ">> /tmp/ddebug.log" or die "no log possible :(";
+    open LOG2, ">> /tmp/ddebug.log";# or die "no log possible :(";
     select((select(LOG), $| = 1)[0]);
     select((select(LOG2), $| = 1)[0]);
     exists $ENV{DEBUG} and $logDebugMessages = 1;
diff --git a/perl-install/my_gtk.pm b/perl-install/my_gtk.pm
index 78a308856..ff34324b0 100644
--- a/perl-install/my_gtk.pm
+++ b/perl-install/my_gtk.pm
@@ -6,8 +6,11 @@ use vars qw(@ISA %EXPORT_TAGS @EXPORT_OK);
 
 @ISA = qw(Exporter);
 %EXPORT_TAGS = (
-    all => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry ask_from_list create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_adjustment gtksignal_connect gtkpack gtkpack_ gtkappend gtkadd gtkset_usize gtkset_justify gtkset_active gtkshow gtkdestroy) ],
+    helpers => [ qw(create_okcancel createScrolledWindow create_menu create_notebook create_packtable create_hbox create_adjustment create_box_with_title) ],
+    wrappers => [ qw(gtksignal_connect gtkpack gtkpack_ gtkappend gtkadd gtkset_usize gtkset_justify gtkset_active gtkshow gtkdestroy) ],
+    ask => [ qw(ask_warn ask_okcancel ask_yesorno ask_from_entry ask_from_list ) ],
 );
+$EXPORT_TAGS{all} = [ map { @$_ } values %EXPORT_TAGS ];
 @EXPORT_OK = map { @$_ } values %EXPORT_TAGS;
 
 use Gtk;
@@ -25,7 +28,6 @@ sub new {
     my ($type, $title, @opts) = @_;
 
     Gtk->init;
-    parse Gtk::Rc "$ENV{HOME}/etc/any/Gtkrc";
     my $o = bless { @opts }, $type;
     $o->{window} = $o->_create_window($title);
     $o;
@@ -136,9 +138,9 @@ sub create_okcancel($;$$) {
 
 sub create_box_with_title($@) {
     my $o = shift;
-    $o->{box} = gtkpack(new Gtk::VBox(0,0),
-		       map({ new Gtk::Label("  $_  ") } @_),
-		       new Gtk::HSeparator,
+    $o->{box} = gtkpack_(new Gtk::VBox(0,0),
+			 0, map({ new Gtk::Label("  $_  ") } @_),
+			 0, new Gtk::HSeparator,
 		       )
 }
 
@@ -227,7 +229,7 @@ sub ask_warn       { my $w = my_gtk->new(shift @_); $w->_ask_warn(@_); main($w);
 sub ask_yesorno    { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Yes"), _("No")); main($w); }
 sub ask_okcancel   { my $w = my_gtk->new(shift @_); $w->_ask_okcancel(@_, _("Is it ok?"), _("Ok"), _("Cancel")); main($w); }
 sub ask_from_entry { my $w = my_gtk->new(shift @_); $w->_ask_from_entry(@_); main($w); }
-sub ask_from_list  { my $w = my_gtk->new(shift @_); $w->_ask_from_list(pop @_, @_); main($w); }
+sub ask_from_list  { my $w = my_gtk->new(shift @_); $w->_ask_from_list(@_); main($w); }
 
 sub _ask_from_entry($$@) {
     my ($o, @msgs) = @_;
@@ -243,19 +245,19 @@ sub _ask_from_entry($$@) {
 	  );
     $entry->grab_focus();
 }
-sub _ask_from_list($$$@) {
-    my ($o, $l, @msgs) = @_;
+sub _ask_from_list($$$$) {
+    my ($o, $messages, $l, $def) = @_;
     my $list = new Gtk::List;
     my ($first_time, $starting_word) = (1, '');
     my (@widgets, $timeout);
-    my @sorted = sort @$l;
     $list->signal_connect(select_child => sub {
-	$o->{retval} = $sorted[$list->child_position($_[1])];
+	$o->{retval} = $l->[$list->child_position($_[1])];
 	Gtk->main_quit;
     });
-    for (my $i = 0; $i < @sorted; $i++) {
+    for (my $i = 0; $i < @$l; $i++) {
 	my $focused = $i;
-	my $w = new Gtk::ListItem($sorted[$i]);
+	$def = $i if $l->[$i] eq $def;
+	my $w = new Gtk::ListItem($l->[$i]);
 	my $id = $w->signal_connect(key_press_event => sub {
              my ($w, $e)= @_;
 	     my $c = chr $e->{keyval};
@@ -271,12 +273,12 @@ sub _ask_from_list($$$@) {
 		   my $curr = $focused + bool($starting_word eq '' || $starting_word eq $c);
 		   $starting_word .= $c unless $starting_word eq $c;
 	
-		   my $j; for ($j = 0; $j < @sorted; $j++) {
-		       $sorted[($j + $curr) % @sorted] =~ /^$starting_word/i and last;
+		   my $j; for ($j = 0; $j < @$l; $j++) {
+		       $l->[($j + $curr) % @$l] =~ /^$starting_word/i and last;
 		   }
-		   $j == @sorted ?
+		   $j == @$l ?
 		     $starting_word = '' :
-		     $widgets[($j + $curr) % @sorted]->grab_focus;
+		     $widgets[($j + $curr) % @$l]->grab_focus;
 	
 		   $w->{timeout} = $timeout = Gtk->timeout_add($forgetTime, sub { $timeout = $starting_word = ''; 0 } );
 	     }
@@ -287,11 +289,11 @@ sub _ask_from_list($$$@) {
     }
     gtkadd($list, @widgets);
     gtkadd($o->{window}, 
-	   gtkpack($o->create_box_with_title(@msgs), 
+	   gtkpack($o->create_box_with_title(@$messages), 
 		   @widgets > 15 ? 
 		     gtkset_usize(createScrolledWindow($list), 0, 300) : 
 		     $list));
-    $widgets[0]->grab_focus;
+    $widgets[$def]->grab_focus;
 }
 
 sub _ask_warn($@) {
diff --git a/perl-install/partition_table.pm b/perl-install/partition_table.pm
index 1986e4dd9..a9f20cd10 100644
--- a/perl-install/partition_table.pm
+++ b/perl-install/partition_table.pm
@@ -78,6 +78,7 @@ my %fs2type = reverse %type2fs;
 
 1;
 
+sub important_types { $_[0] and return sort values %types; @important_types } 
 sub type2name($) { $types{$_[0]} || 'unknown' }
 sub type2fs($) { $type2fs{$_[0]} }
 sub name2type($) { $types_rev{$_[0]} }
diff --git a/perl-install/partition_table_raw.pm b/perl-install/partition_table_raw.pm
index d85789a50..973961f5a 100644
--- a/perl-install/partition_table_raw.pm
+++ b/perl-install/partition_table_raw.pm
@@ -93,9 +93,9 @@ sub write($$$) {
 	compute_CHS($hd, $_);
 	local $_->{start} = $_->{local_start} || 0;
 	$_->{active} ||= 0; $_->{type} ||= 0; $_->{size} ||= 0; # for no warning
-	syswrite F, pack($format, @$_{@fields}) or return 0;
+	syswrite F, pack($format, @$_{@fields}), psizeof($format) or return 0;
     }
-    syswrite F, $magic or return 0;
+    syswrite F, $magic, length $magic or return 0;
     1;
 }
 sub zero_MBR($) { &write($_[0], 0, [ {} x $nb_primary ]); }
diff --git a/perl-install/pkgs.pm b/perl-install/pkgs.pm
index 7795a7f8a..f56e43cee 100644
--- a/perl-install/pkgs.pm
+++ b/perl-install/pkgs.pm
@@ -9,6 +9,7 @@ use install_any;
 use log;
 use smp;
 use fs;
+use lang;
 
 my @skipThesesPackages = qw(XFree86-8514 XFree86-AGX XFree86-FBDev XFree86-Mach32 XFree86-Mach64 
 	XFree86-Mach8 XFree86-Mono XFree86-P9000 XFree86-S3 XFree86-S3V
@@ -31,9 +32,11 @@ sub select($$;$) {
     my @l = @{$p->{deps}};
     while (@l) {
 	my $n = shift @l;
+	$n =~ /|/ and $n = first(split '\|', $n); #TODO better handling of choice
 	my $i = Package($packages, $n);
 	$i->{base} = $base;
-	push @l, @{$i->{deps}} unless $i->{selected};
+	$i->{deps} or log::l("missing deps for $n");
+	push @l, @{$i->{deps} || []} unless $i->{selected};
 	$i->{selected}++ unless $i->{selected} == -1;
     }
 }
@@ -56,7 +59,7 @@ sub unselect($$) {
 
 	$i->{selected} <= 0 and next;
 	if (--$i->{selected} == 0) {
-	    push @$l, @{$i->{deps}};
+	    push @$l, @{$i->{deps} || []};
 	}
     }
 
@@ -221,6 +224,17 @@ sub init_db {
     $isUpgrade ? c::rpmdbRebuild($prefix) : c::rpmdbInit($prefix, 0644) or die "creation/rebuilding of rpm database failed: ", c::rpmErrorString();
 }
 
+sub getHeader($) {
+    my ($p) = @_;
+
+    unless ($p->{header}) {
+	local *F;
+	open F, $p->{file} or die "error opening package $p->{name} (file $p->{file})";
+	$p->{header} = c::rpmReadPackageHeader(fileno F);
+    }
+    $p->{header};
+}
+
 sub install {
     my ($prefix, $toInstall, $isUpgrade, $force) = @_;
 
@@ -232,11 +246,7 @@ sub install {
     my ($total, $nb);
 
     foreach my $p (@$toInstall) {
-	local *F;
-	open F, $p->{file} or die "error opening package $p->{name} (file $p->{file})";
-	$p->{header} = c::rpmReadPackageHeader(fileno F);
-
-	c::rpmtransAddPackage($trans, $p->{header}, $p->{file}, $isUpgrade);
+	c::rpmtransAddPackage($trans, getHeader($p), $p->{file}, $isUpgrade);
 	$nb++;
 	$total += $p->{size};
     }
diff --git a/perl-install/resize_fat/fat.pm b/perl-install/resize_fat/fat.pm
index 2b64bd6f7..371e90feb 100644
--- a/perl-install/resize_fat/fat.pm
+++ b/perl-install/resize_fat/fat.pm
@@ -36,7 +36,7 @@ sub write($) {
 
     sysseek $fs->{fd}, $fs->{fat_offset}, 0 or die "write_fat: seek failed";
     foreach (1..$fs->{nb_fats}) {
-	syswrite $fs->{fd}, $fs->{fat}, $fs->{fat_size} or die "write_fat: write failed";
+	syswrite $fs->{fd}, $fs->{fat} or die "write_fat: write failed";
     }
 }
 
diff --git a/perl-install/resize_fat/io.pm b/perl-install/resize_fat/io.pm
index 8ffaa8355..4d1a37158 100644
--- a/perl-install/resize_fat/io.pm
+++ b/perl-install/resize_fat/io.pm
@@ -18,7 +18,7 @@ sub read($$$) {
 sub write($$$$) {
     my ($fs, $pos, $size, $buf) = @_;
     sysseek $fs->{fd}, $pos, 0 or die "seeking to byte #$pos failed on device $fs->{fs_name}";
-    syswrite $fs->{fd}, $buf, $size or die "writing at byte #$pos failed on device $fs->{fs_name}";
+    syswrite $fs->{fd}, $buf or die "writing at byte #$pos failed on device $fs->{fs_name}";
 }
 
 sub read_cluster($$) {
diff --git a/perl-install/share/diskdrake.rc b/perl-install/share/diskdrake.rc
index 13804f8ca..637b8f3b1 100644
--- a/perl-install/share/diskdrake.rc
+++ b/perl-install/share/diskdrake.rc
@@ -7,7 +7,7 @@ binding "bind"
 
 style "font"
 {
-  font = "-adobe-helvetica-medium-r-normal--*-80-*-*-*-*-*-*"
+  font = "-adobe-helvetica-medium-r-normal-*-*-80-*-*-p-*-iso8859-1"
 }
 
 
-- 
cgit v1.2.1