From 381f87cf6aa42618d604746bd3ada6aa7389017d Mon Sep 17 00:00:00 2001 From: Till Kamppeter Date: Fri, 26 Jul 2002 00:56:19 +0000 Subject: First step of automatic HP multi-function device configuration with HPOJ 0.9. --- perl-install/printer.pm | 293 +++++++++++++++++++++++++++++++++--------------- 1 file changed, 203 insertions(+), 90 deletions(-) diff --git a/perl-install/printer.pm b/perl-install/printer.pm index 60ac7036c..49170e209 100644 --- a/perl-install/printer.pm +++ b/perl-install/printer.pm @@ -1454,23 +1454,60 @@ sub copy_foomatic_queue { sub configure_hpoj { my ($device, @autodetected) = @_; + + # Make the subroutines of /usr/sbin/ptal-init available + local *PTALINIT; + open PTALINIT, "/usr/sbin/ptal-init" || do { + die "unable to open /usr/sbin/ptal-init"; + }; + my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init + while() { + if (m!sub main!) { + last; + } elsif (m!^[^\#]!) { + push (@ptalinitfunctions, $_); + } + } + close PTALINIT; + eval "@ptalinitfunctions + sub getDevnames { + return (%devnames) + } + sub getConfigInfo { + return (%configInfo) + }"; + + # Read the HPOJ config file and check whether this device is already + # configured + setupVariables(); + readDeviceInfo(); + # Get the model ID as auto-detected $device =~ m!^/dev/\S*lp(\d+)$!; my $model = $1; + my $serialnumber = ""; my $device_ok = 1; + my $bus; + my $address_arg = ""; + my $base_address = ""; + if ($device =~ /usb/) { + $bus = "usb"; + } else { + $bus = "par"; + $address_arg = parport_addr($device); + $address_arg =~ /^\s*-base\s+(\S+)/; + eval ("$base_address = $1;"); + } + my $devdata; + foreach (@autodetected) { $device eq $_->{port} or next; + $devdata = $_; $model = $_->{val}{MODEL}; + $serialnumber = $_->{val}{SERIALNUMBER}; + undef $_->{val}{CARDREADER}; # Check if the device is really an HP multi-function device stop_service("hpoj"); - my $bus; - my $address_arg = ""; - if ($device =~ /usb/) { - $bus = "usb"; - } else { - $bus = "par"; - $address_arg = parport_addr($device); - } run_program::rooted($prefix, "ptal-mlcd", "$bus:probe", "-device", "$device", split(' ',$address_arg)); @@ -1479,7 +1516,12 @@ sub configure_hpoj { if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/ptal-devid mlc:$bus:probe |") { my $devid = join("", ); close F; - if ($devid) {$device_ok = 1}; + if ($devid) { + $device_ok = 1; + if (cardReaderDetected("mlc:$bus:probe")) { + $_->{val}{CARDREADER} = 1; + } + } } if (open F, ($::testing ? "$prefix" : "chroot $prefix/ ") . "ps auxwww | grep \"ptal-mlcd $bus:probe\" | grep -v grep | ") { my $line = ; @@ -1495,89 +1537,162 @@ sub configure_hpoj { # No, it is not an HP multi-function device. return "" if (!$device_ok); #$device = "/dev/usb/lp1"; $model = "DeskJet 990C"; - # Read the HPOJ config file and check whether this device is already - # configured - my $deviceconfigured = 0; - my $ptaldevice; - my $hpoj_config = "/etc/ptal-start.conf"; - local *HPOJCONFIG; - if (open HPOJCONFIG, ("< $prefix$hpoj_config")) { - while ($line = ) { - chomp $line; - # Comment or blank line - next if (($line =~ /^\s*\#/) || ($line =~ /^\s*$/)); - # Only lines beginning with "ptal-mlcd" are interesting. - next if ($line !~ /^\s*ptal-mlcd\s+(\S+)\s+/); - $ptaldevice = "mlc:$1"; - if ($ptaldevice =~ /^mlc:par:(\d+)$/) { - # Parallel device - next if ($device =~ /usb/); - if ($line =~ m!-device\s+$device!) { - # Our new device is parallel and already configured - # by the current line - $deviceconfigured = 1; - last; - } - } elsif ($ptaldevice =~ /^mlc:usb:(.+)$/) { - # USB device - next if ($device !~ /usb/); - if ($line =~ /-devidmatch\s+(\"[^\"]*\")/) { - $configuredmodel = $1; - $configuredmodel =~ s/\"//g; - $configuredmodel =~ s/^mdl://; - $configuredmodel =~ s/^model://; - $configuredmodel =~ s/;$//; - if ($configuredmodel eq $model) { - # Our new device is USB and already configured - # by the current line - $deviceconfigured = 1; - last; - } - } elsif ($line =~ m!-device\s+(/dev/usb/lp\d+)!) { - if ($1 eq $device) { - # Our new device is USB and already configured - # by the current line - $deviceconfigured = 1; - last; - } - } + + # Determine the ptal device name + my $ptaldevice = lookupDevname("mlc:$bus:", $model, $serialnumber, + $base_address); + + + + # It's all done for us, the device is already configured + return $ptaldevice if defined($ptaldevice); + + # Determine the ptal name for the device + $ptaldevice = $model; + $ptaldevice =~ s![\s/]+!_!g; + $ptaldevice = "mlc:$bus:$ptaldevice"; + + # Delete any old/conflicting devices + &deleteDevice($ptaldevice); + if ($bus eq "par") { + while (1) { + my $oldDevname=&lookupDevname("mlc:par:",undef,undef, + $base_address); + if (!defined($oldDevname)) { + last; } + &deleteDevice($oldDevname); } - close HPOJCONFIG; } - # It's all done for us, the device is already configured - return $ptaldevice if $deviceconfigured; - # Configure the device - my $entry; - if ($device =~ /usb/) { - # USB device - my $ptaldevicemodel = $model; - $ptaldevicemodel =~ s/\s+/_/g; - if ($model =~ /^\d+$/) { - $entry = "\nptal-mlcd usb:$ptaldevicemodel -device $device \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n"; - } else { - $entry = "\nptal-mlcd usb:$ptaldevicemodel -device /dev/usb/lp* -devidmatch \"$model;\" \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:usb:$ptaldevicemodel \$PTAL_PRINTD_CMDLINE_APPEND\n"; + + # Open configuration file + local *CONFIG; + open(CONFIG,"> /etc/ptal/$ptaldevice") || + die "Could not open /etc/ptal/$ptaldevice for writing!\n"; + + # Write file header. + $_=`date`; + chomp; + print CONFIG + "# Added $_ by \"printerdrake\".\n". + "\n". + "# The basic format for this file is \"key[+]=value\".\n". + "# If you say \"+=\" instead of \"=\", then the value is appended to any\n". + "# value already defined for this key, rather than replacing it.\n". + "\n". + "# Comments must start at the beginning of the line. Otherwise, they may\n". + "# be interpreted as being part of the value.\n". + "\n". + "# If you have multiple devices and want to define options that apply to\n". + "# all of them, then put them in the file /etc/ptal/defaults, which is read\n". + "# in before this file.\n". + "\n". + "# The format version of this file:\n". + "# ptal-init ignores devices with incorrect/missing versions.\n". + "init.version=1\n"; + + # Write model string. + if ($model !~ /\S/) { + print CONFIG + "\n". + "# \"printerdrake\" couldn't read the model but added this device anyway:\n". + "# "; + } else { + print CONFIG + "\n". + "# The device model that was originally detected on this port:\n". + "# If this ever changes, then you should re-run \"printerdrake\"\n". + "# to delete and re-configure this device.\n"; + if ($bus eq "par") { + print CONFIG + "# Comment out if you don't care what model is really connected to this\n". + "# parallel port.\n"; } - $ptaldevice = "mlc:usb:$ptaldevicemodel"; + } + print CONFIG + "init.mlcd.append+=-devidmatch \"$model\"\n"; + + # Write serial-number string. + if ($serialnumber!~/\S/) { + print CONFIG + "\n". + "# The device's serial number is unknown.\n". + "# "; } else { - # parallel device - # auto-detect the parallel port addresses - $device =~ m!^/dev/lp(\d+)$!; - my $portnumber = $1; - my $address_arg = parport_addr($device); - $entry = "\nptal-mlcd par:$portnumber -device $device$address_arg \$PTAL_MLCD_CMDLINE_APPEND\nptal-printd mlc:par:$portnumber \$PTAL_PRINTD_CMDLINE_APPEND\n"; - $ptaldevice = "mlc:par:$portnumber"; - } - - # Add new entry to HPOJ's config file - open(HPOJCONFIG,">> $prefix$hpoj_config") || - die "Could not open $hpoj_config for writing!\n"; - print HPOJCONFIG $entry; - close HPOJCONFIG; + print CONFIG + "\n". + "# The serial number of the device that was originally detected on this port:\n" + ; + if ($bus=~/^[pu]/) { + print CONFIG + "# Comment out if you want to disable serial-number matching.\n"; + } + } + print CONFIG + "init.mlcd.append+=-devidmatch \"$serialnumber\"\n"; + + if ($bus=~/^[pu]/) { + print CONFIG + "\n". + "# Standard options passed to ptal-mlcd:\n". + "init.mlcd.append+="; + if ($bus eq "usb") { + # Important: don't put more quotes around /dev/usb/lp[0-9]*, + # because ptal-mlcd currently does no globbing: + print CONFIG "-device /dev/usb/lp[0-9]*"; + } elsif ($bus eq "par") { + print CONFIG "$address_arg -device $device"; + } + print CONFIG "\n". + "\n". + "# ptal-mlcd's remote console can be useful for debugging, but may be a\n". + "# security/DoS risk otherwise. In any case, it's accessible with the\n". + "# command \"ptal-connect mlc:: -service PTAL-MLCD-CONSOLE\".\n". + "# Uncomment the following line if you want to enable this feature for\n". + "# this device:\n". + "# init.mlcd.append+=-remconsole\n". + "\n". + "# If you need to pass any other command-line options to ptal-mlcd, then\n". + "# add them to the following line and uncomment the line:\n". + "# init.mlcd.append+=\n". + "\n". + "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n". + "# then you may not be able to use ptal-printd, and you can uncomment the\n". + "# following line to disable ptal-printd for this device:\n". + "# init.printd.start=0\n"; + } else { + print CONFIG + "\n". + "# By default ptal-printd isn't started for hpjd: devices.\n". + "# If for some reason you want to start it for this device, then\n". + "# uncomment the following line:\n". + "# init.printd.start=1\n"; + } + + print CONFIG + "\n". + "# If you need to pass any additional command-line options to ptal-printd,\n". + "# then add them to the following line and uncomment the line:\n". + "# init.printd.append+=\n"; + if (defined($_->{val}{CARDREADER})) { + print CONFIG + "\n". + "# Uncomment the following line to enable ptal-photod for this device:\n". + "init.photod.start=1\n". + "\n". + "# If you have more than one photo-card-capable peripheral and you want to\n". + "# assign particular TCP port numbers and mtools drive letters to each one,\n". + "# then change the line below to use the \"-portoffset \" option.\n". + "init.photod.append+=-maxaltports 26\n"; + } + close(CONFIG); + readOneDevice($ptaldevice); + # Restart HPOJ restart_service("hpoj"); + # Return HPOJ device name to form the URI return $ptaldevice; } @@ -1603,16 +1718,14 @@ sub parport_addr{ sub config_sane { my ($ptaldevice) = @_; - # Create config file for HP backend - output("$prefix/etc/sane.d/hp.conf", - "$ptaldevice\noption connect-ptal\n"); - - # Add HP backend to /etc/sane.d/dll.conf if needed - return if member("hp", chomp_(cat_("$prefix/etc/sane.d/dll.conf"))); + # Add HPOJ backend to /etc/sane.d/dll.conf if needed (no individual + # config file /etc/sane.d/hpoj.conf necessary, the HPOJ driver finds the + # scanner automatically) + return if member("hpoj", chomp_(cat_("$prefix/etc/sane.d/dll.conf"))); local *F; open F, ">> $prefix/etc/sane.d/dll.conf" or die "can't write SANE config in /etc/sane.d/dll.conf: $!"; - print F "hp\n"; + print F "hpoj\n"; close F; } -- cgit v1.2.1