use lower case 'i' in iwconfig/iwpriv/iwspy (#18031)

73 files changed, 577 insertions, 577 deletions

diff --git a/perl-install/network/netconnect.pm b/perl-install/network/netconnect.pm
index 3c4ac84d9..19db78127 100644
--- a/perl-install/network/netconnect.pm
+++ b/perl-install/network/netconnect.pm
@@ -1030,7 +1030,7 @@ packet size disable the scheme. You may also set this parameter to auto, fixed
 or off.")
                              },
                              { label => N("Fragmentation"), val => \$ethntf->{WIRELESS_FRAG}, advanced => 1 },
-                             { label => N("Iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
+                             { label => N("iwconfig command extra arguments"), val => \$ethntf->{WIRELESS_IWCONFIG}, advanced => 1,
                                help => N("Here, one can configure some extra wireless parameters such as:
 ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).
 
@@ -1038,8 +1038,8 @@ See iwconfig(8) man page for further information."),
                              },
                              { label =>
                                #-PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-                               N("Iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
-                               help => N("Iwspy is used to set a list of addresses in a wireless network
+                               N("iwspy command extra arguments"), val => \$ethntf->{WIRELESS_IWSPY}, advanced => 1,
+                               help => N("iwspy is used to set a list of addresses in a wireless network
 interface and to read back quality of link information for each of those.
 
 This information is the same as the one available in /proc/net/wireless :
@@ -1048,11 +1048,11 @@ quality of the link, signal strength and noise level.
 See iwpspy(8) man page for further information."),
  },
                              if_(!$need_rt2x00_iwpriv,
-                                 { label => N("Iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
-                                   help => N("Iwpriv enable to set up optionals (private) parameters of a wireless network
+                                 { label => N("iwpriv command extra arguments"), val => \$ethntf->{WIRELESS_IWPRIV}, advanced => 1,
+                                   help => N("iwpriv enable to set up optionals (private) parameters of a wireless network
 interface.
 
-Iwpriv deals with parameters and setting specific to each driver (as opposed to
+iwpriv deals with parameters and setting specific to each driver (as opposed to
 iwconfig which deals with generic ones).
 
 In theory, the documentation of each device driver should indicate how to use
diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 3358ef262..9a5ffd6b9 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -9242,7 +9242,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9257,13 +9257,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9274,16 +9274,16 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless network\n"
+"iwpriv enable to set up optionals (private) parameters of a wireless network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
+"iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
 "In theory, the documentation of each device driver should indicate how to use\n"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index ebe591f84..b1cd9b08c 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -10837,8 +10837,8 @@ msgstr "Fragmentasie"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig program se ekstra argumente"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig program se ekstra argumente"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10857,13 +10857,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy program se ekstra argumente"
+msgid "iwspy command extra arguments"
+msgstr "iwspy program se ekstra argumente"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10871,7 +10871,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+"iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 "\n"
 "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
@@ -10881,17 +10881,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv program se ekstra argumente"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv program se ekstra argumente"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10901,10 +10901,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv stel u in staat om privaatheidsverstellings aan\n"
+"iwpriv stel u in staat om privaatheidsverstellings aan\n"
 "die draadlose netwerkkoppelvlak aan te bring.\n"
 "\n"
-"Iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
+"iwpriv maak verstellings aan die spesifieke drywers (in teenstelling met "
 "iwconfig wat generiese verstellings doen)\n"
 "\n"
 "In teorie, behoort u al die nodige inligting vanaf die drywer\n"
@@ -28254,7 +28254,7 @@ msgstr "Installasie het gefaal!"
 #~ "Bv. ``io=0x300 irq-7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
@@ -28263,7 +28263,7 @@ msgstr "Installasie het gefaal!"
 #~ "\n"
 #~ "See iwpspy(8) man page for further information."
 #~ msgstr ""
-#~ "Iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
+#~ "iwspy word gebruik om 'n lys op te stel van adresse in 'n draadlose\n"
 #~ "netwerk asook om die gehalte van elke koppeling van elk te lees.\n"
 #~ "\n"
 #~ "Hierdie inligting kan ook bekom word in /proc/net/wireless :\n"
diff --git a/perl-install/share/po/am.po b/perl-install/share/po/am.po
index 4af65be87..c1a964714 100644
--- a/perl-install/share/po/am.po
+++ b/perl-install/share/po/am.po
@@ -9616,7 +9616,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9632,13 +9632,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9649,17 +9649,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 3038b9586..f4373ba53 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -10995,8 +10995,8 @@ msgstr "مستوى التّجزّء"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "المُعطيات الإضافية لأمر Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "المُعطيات الإضافية لأمر iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11016,13 +11016,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11040,17 +11040,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "المُعطيات الإضافيّة لأمر Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "المُعطيات الإضافيّة لأمر iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11060,10 +11060,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"يمكنك Iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
+"يمكنك iwpriv من إعداد المُعطيات الاختياريّة (الخاصّة) لواجهة الشّبكة\n"
 "اللّاسلكيّة.\n"
 "\n"
-"يتعامل Iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
+"يتعامل iwpriv مع المُعطيات وتحديد الخواصّ لكل مشغّل (بعكس\n"
 "iwconfig والذي يتعامل مع الأشياء العامّة).\n"
 "\n"
 "نظريّاً، يجب أن يُبيّن مواثقة كلّ مشغّل جهاز كيفيّة استخدام\n"
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 08119bcc6..58c1a2ef6 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -10965,8 +10965,8 @@ msgstr "Fraqmentasiya"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig əmri əlavə arqumentləri"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10981,13 +10981,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy əmri əlavə arqumentləri"
+msgid "iwspy command extra arguments"
+msgstr "iwspy əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10998,17 +10998,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv əmri əlavə arqumentləri"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv əmri əlavə arqumentləri"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index 475a821d0..bcc20e386 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -9720,7 +9720,7 @@ msgstr "Аўтэнтыфікацыя"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9736,13 +9736,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9753,17 +9753,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index b6e475851..62e84b53a 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po
@@ -10567,7 +10567,7 @@ msgstr "Игрална станция"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10583,13 +10583,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10600,17 +10600,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bn.po b/perl-install/share/po/bn.po
index 7a356a31a..8136da312 100644
--- a/perl-install/share/po/bn.po
+++ b/perl-install/share/po/bn.po
@@ -10567,7 +10567,7 @@ msgstr "ফ্রাগমেন্টেশন"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Iwকন্‌ফিগ কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1034
@@ -10589,13 +10589,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Iwস্পাই কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1042
 #, fuzzy, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10603,23 +10603,23 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy  ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n"
+"iwspy  ব্যবহার করা হয় ওয়্যারলেস নেটওয়ার্ক ইন্টারফেসে একটি ঠিকানার\n"
 "তালিকা সেট করা এবং তার প্রতিটির সংযোগ এর মান সংক্রান্ত তথ্য পড়ার জন্য।\n"
 "\n"
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv কমান্ড অতিরিক্ত আর্গুমেন্ট"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/br.po b/perl-install/share/po/br.po
index c82fdcc65..d55833b9b 100644
--- a/perl-install/share/po/br.po
+++ b/perl-install/share/po/br.po
@@ -9779,7 +9779,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9795,13 +9795,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9812,17 +9812,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 24670c30d..c7c305256 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po
@@ -11114,7 +11114,7 @@ msgstr "Fragmentacija"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Dodatni parametri naredbe iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11135,13 +11135,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Dodatni parametri naredbe iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11159,17 +11159,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Dodatni parametri naredbe iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11179,10 +11179,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
+"iwpriv omogućuje podešavanje opcionalnih (privatnih) parametara bežičnog\n"
 "mrežnog interfejsa.\n"
 "\n"
-"Iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
+"iwpriv se bavi parametrima i postavkama specifičnim za svaki drajver (za "
 "razliku\n"
 "od iwconfig koji se bavi opštim parametrima).\n"
 "\n"
diff --git a/perl-install/share/po/ca.po b/perl-install/share/po/ca.po
index 3fb27600d..fd3ef84bb 100644
--- a/perl-install/share/po/ca.po
+++ b/perl-install/share/po/ca.po
@@ -11206,7 +11206,7 @@ msgstr "Fragmentació"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Arguments extra per a lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11222,13 +11222,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Arguments extra per a lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11239,17 +11239,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Arguments extra per a lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/cs.po b/perl-install/share/po/cs.po
index 37a26b5e7..427007b1c 100644
--- a/perl-install/share/po/cs.po
+++ b/perl-install/share/po/cs.po
@@ -11110,8 +11110,8 @@ msgstr "Fragmentace"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "dodatečné parametry příkazu Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "dodatečné parametry příkazu iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11131,13 +11131,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "dodatečné parametry příkazu lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11155,17 +11155,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "dodatečné parametry příkazu lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/cy.po b/perl-install/share/po/cy.po
index 44e39d109..bc6f90b40 100644
--- a/perl-install/share/po/cy.po
+++ b/perl-install/share/po/cy.po
@@ -11066,8 +11066,8 @@ msgstr "Darniad"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "ymresymiadau ychwanegol gorchymyn iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11087,13 +11087,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "ymresymiadau ychwanegol gorchymyn lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11111,17 +11111,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ymresymiadau ychwanegol gorchymyn Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "ymresymiadau ychwanegol gorchymyn iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/da.po b/perl-install/share/po/da.po
index 318e7c486..a85519cac 100644
--- a/perl-install/share/po/da.po
+++ b/perl-install/share/po/da.po
@@ -11026,8 +11026,8 @@ msgstr "Fragmentation"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "ekstra argumenter til Iwconfig kommando"
+msgid "iwconfig command extra arguments"
+msgstr "ekstra argumenter til iwconfig kommando"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11047,13 +11047,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "ekstra argumenter til Iwspy-kommando"
+msgid "iwspy command extra arguments"
+msgstr "ekstra argumenter til iwspy-kommando"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11061,7 +11061,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
+"iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
 "netværksgrænseflade\n"
 "og for at læse tilbage kvalitet på en link for hver af dem.\n"
 "\n"
@@ -11073,17 +11073,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "ekstra argumenter til Iwpriv-kommando"
+msgid "iwpriv command extra arguments"
+msgstr "ekstra argumenter til iwpriv-kommando"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11093,10 +11093,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv gør det muligt at opsætte valgfrie (private) parametre for en trådløs "
+"iwpriv gør det muligt at opsætte valgfrie (private) parametre for en trådløs "
 "netværksgrænseflade.\n"
 "\n"
-"Iwpriv hånderer parametre og opsætning specifikt for hver driver (i "
+"iwpriv hånderer parametre og opsætning specifikt for hver driver (i "
 "modsætning til\n"
 "iwconfig som håndterer generelle).\n"
 "\n"
@@ -28629,7 +28629,7 @@ msgstr "Installation mislykkedes"
 #~ "F.eks., ``io=0x300 irq=7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
@@ -28638,7 +28638,7 @@ msgstr "Installation mislykkedes"
 #~ "\n"
 #~ "See iwpspy(8) man page for further information."
 #~ msgstr ""
-#~ "Iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
+#~ "iwspy bliver brugt til at sætte en liste med adresser i en trådløs "
 #~ "netværksgrænseflade\n"
 #~ "og for at læse tilbage kvalitet på en link for hver af dem.\n"
 #~ "\n"
diff --git a/perl-install/share/po/de.po b/perl-install/share/po/de.po
index 239754d3f..2557ffa7b 100644
--- a/perl-install/share/po/de.po
+++ b/perl-install/share/po/de.po
@@ -11252,7 +11252,7 @@ msgstr "Fragmentierung"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Zusätzlche Schalter für den Befehl lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11272,13 +11272,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Zusätzliche Schalter für den Befehl lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11296,17 +11296,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Extra-Schalter für den Befehl lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/el.po b/perl-install/share/po/el.po
index fadb5d98d..7b25e0bd7 100644
--- a/perl-install/share/po/el.po
+++ b/perl-install/share/po/el.po
@@ -10789,7 +10789,7 @@ msgstr "Σταθμός παιχνιδιών"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10805,13 +10805,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10822,17 +10822,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/eo.po b/perl-install/share/po/eo.po
index a7173beeb..73a926629 100644
--- a/perl-install/share/po/eo.po
+++ b/perl-install/share/po/eo.po
@@ -9985,7 +9985,7 @@ msgstr "Dokumentaro"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10001,13 +10001,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10018,17 +10018,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/es.po b/perl-install/share/po/es.po
index 781b86d86..b6f6dabbd 100644
--- a/perl-install/share/po/es.po
+++ b/perl-install/share/po/es.po
@@ -11259,7 +11259,7 @@ msgstr "Fragmentación"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Argumentos extra del comando lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11280,13 +11280,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "argumentos extra para el comando lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11294,7 +11294,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy se usa para ajustar una lista de direcciones en una interfaz de red\n"
+"iwspy se usa para ajustar una lista de direcciones en una interfaz de red\n"
 "inalámbrica y para leer la calidad del vínculo de información para cada una "
 "de ellas.\n"
 "\n"
@@ -11305,17 +11305,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "argumentos extra para el comando Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "argumentos extra para el comando iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11325,11 +11325,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permite configurar parámetros (privados) opcionales de una interfaz "
+"iwpriv permite configurar parámetros (privados) opcionales de una interfaz "
 "de red\n"
 "inalámbrica.\n"
 "\n"
-"Iwpriv maneja los parámetros y ajustes específicos para cada controlador (a "
+"iwpriv maneja los parámetros y ajustes específicos para cada controlador (a "
 "diferencia de\n"
 "iwconfig que maneja los parámetros genéricos).\n"
 "\n"
diff --git a/perl-install/share/po/et.po b/perl-install/share/po/et.po
index d83c46c1e..dc18b86f9 100644
--- a/perl-install/share/po/et.po
+++ b/perl-install/share/po/et.po
@@ -11092,7 +11092,7 @@ msgstr "Killustus"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Käsu iwconfig lisaargumendid"
 
 #: network/netconnect.pm:1034
@@ -11113,13 +11113,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Käsu iwspy lisaargumendid"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11137,17 +11137,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Käsu iwpriv lisaargumendid"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11157,9 +11157,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv lubab määrata traadita võrgu liidesele (privaatsed) lisaparameetrid.\n"
+"iwpriv lubab määrata traadita võrgu liidesele (privaatsed) lisaparameetrid.\n"
 "\n"
-"Iwpriv tegeleb iga draiveri parameetrite ja seadistustega eraldi (erinevalt\n"
+"iwpriv tegeleb iga draiveri parameetrite ja seadistustega eraldi (erinevalt\n"
 "iwconfig-ist, mis tegeleb üldiste parameetritega).\n"
 "\n"
 "Teoreetiliselt peaks iga seadmedraiveri dokumentatsioon selgitama liidese\n"
diff --git a/perl-install/share/po/eu.po b/perl-install/share/po/eu.po
index e0fe2571c..c2263569f 100644
--- a/perl-install/share/po/eu.po
+++ b/perl-install/share/po/eu.po
@@ -11163,8 +11163,8 @@ msgstr "Fragmentazioa"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig komandoko argumentu estrak"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig komandoko argumentu estrak"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11184,13 +11184,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy komandoko argumentu estrak"
+msgid "iwspy command extra arguments"
+msgstr "iwspy komandoko argumentu estrak"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11198,7 +11198,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy erabiltzen da helbide-zerrenda bat ezartzeko haririk gabeko\n"
+"iwspy erabiltzen da helbide-zerrenda bat ezartzeko haririk gabeko\n"
 "sare-interfazean eta horietako bakoitzaren esteka-informazioaren \n"
 "kalitatea irakurtzeko.\n"
 "\n"
@@ -11209,17 +11209,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv komandoko argumentu estrak"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv komandoko argumentu estrak"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11229,11 +11229,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv-ek haririk gabeko sare-interfaze batean aukerako parametroak "
+"iwpriv-ek haririk gabeko sare-interfaze batean aukerako parametroak "
 "(pribatuak)\n"
 "ezartzeko aukera ematen du.\n"
 "\n"
-"Iwpriv-ek kontrolatzaile bakoitzaren parametro eta ezarpen espezifikoak "
+"iwpriv-ek kontrolatzaile bakoitzaren parametro eta ezarpen espezifikoak "
 "kudeatzen\n"
 "ditu (iwconfig-ek generikoak kudeatzen dituen bitartean).\n"
 "\n"
diff --git a/perl-install/share/po/fa.po b/perl-install/share/po/fa.po
index 4f40e8529..053860d54 100644
--- a/perl-install/share/po/fa.po
+++ b/perl-install/share/po/fa.po
@@ -11051,7 +11051,7 @@ msgstr "درهم‌ریختگی"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "آرگومان‌های اضافی فرمان iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11072,13 +11072,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "آرگومان‌های اضافی فرمان iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11086,7 +11086,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy برای گذاشتن لیستی از نشانی‌ها در واسط شبکه‌ی بی‌سیم و برای بازخوانی\n"
+"iwspy برای گذاشتن لیستی از نشانی‌ها در واسط شبکه‌ی بی‌سیم و برای بازخوانی\n"
 "کیفیت اطلاعات پیوند هر یک از آنها استفاده می‌شود.\n"
 "\n"
 "این اطلاعات همان است که در /proc/net/wireless وجود دارد :\n"
@@ -11096,17 +11096,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "آرگومان‌های اضافی فرمان Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "آرگومان‌های اضافی فرمان iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11116,10 +11116,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv برپاسازی پارامترهای اختیاری (خصوصی) یک واسط شبکه‌ی بی‌سیم را قادر "
+"iwpriv برپاسازی پارامترهای اختیاری (خصوصی) یک واسط شبکه‌ی بی‌سیم را قادر "
 "می‌سازد.\n"
 "\n"
-"Iwpriv با پارامترها و تنظیم مخصوص به هر راه‌انداز سر و کار دارد (در مقابله "
+"iwpriv با پارامترها و تنظیم مخصوص به هر راه‌انداز سر و کار دارد (در مقابله "
 "با \n"
 "iwconfig که با عمومی آنها سر و کار دارد).\n"
 "\n"
diff --git a/perl-install/share/po/fi.po b/perl-install/share/po/fi.po
index 4b6a1414a..dcf3f2d71 100644
--- a/perl-install/share/po/fi.po
+++ b/perl-install/share/po/fi.po
@@ -11223,8 +11223,8 @@ msgstr "Pirstoutuminen"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Komennon Iwconfig ylimääräiset parametrit"
+msgid "iwconfig command extra arguments"
+msgstr "Komennon iwconfig ylimääräiset parametrit"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11244,13 +11244,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Komennon Iwspy ylimääräiset parametrit"
+msgid "iwspy command extra arguments"
+msgstr "Komennon iwspy ylimääräiset parametrit"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11258,7 +11258,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy käytetään asettamaan lista osoitteita langattomaan verkkoliitäntään\n"
+"iwspy käytetään asettamaan lista osoitteita langattomaan verkkoliitäntään\n"
 "ja tarkistamaan jokaisesta yhteyden laatu.\n"
 "\n"
 "Nämä tiedot ovat samat jotka löytyvät /proc/net/wireless:\n"
@@ -11268,17 +11268,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Komennon Iwpriv ylimääräiset parametrit"
+msgid "iwpriv command extra arguments"
+msgstr "Komennon iwpriv ylimääräiset parametrit"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11288,10 +11288,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv mahdollistaa langattoman verkkoliitännän lisäasetusten (private)\n"
+"iwpriv mahdollistaa langattoman verkkoliitännän lisäasetusten (private)\n"
 "asettamisen.\n"
 "\n"
-"Iwpriv käsittelee kullekin ajurille ominaiset parametrit ja asetukset\n"
+"iwpriv käsittelee kullekin ajurille ominaiset parametrit ja asetukset\n"
 "(toisin kuin iwconfig joka käsittelee yleiset asetukset).\n"
 "\n"
 "Teoriassa kunkin laiteajurin dokumentaation tulisi kertoa kuinka käyttää\n"
diff --git a/perl-install/share/po/fr.po b/perl-install/share/po/fr.po
index 8f0d56813..cdb674c3b 100644
--- a/perl-install/share/po/fr.po
+++ b/perl-install/share/po/fr.po
@@ -11317,7 +11317,7 @@ msgstr "Fragmentation"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwconfig"
@@ -11341,7 +11341,7 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwspy"
@@ -11349,7 +11349,7 @@ msgstr ""
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11357,7 +11357,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy est utilisé pour définir une liste d'adresses au niveau d'une\n"
+"iwspy est utilisé pour définir une liste d'adresses au niveau d'une\n"
 "interface réseau sans fil afin d'obtenir la qualité du signal pour\n"
 "chacune d'entre elles.\n"
 "\n"
@@ -11368,7 +11368,7 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 "Arguments supplémentaires\n"
 "pour la commande iwpriv"
@@ -11376,11 +11376,11 @@ msgstr ""
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11390,7 +11390,7 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permet de spécifier des paramètres optionnels (et privés) d'une "
+"iwpriv permet de spécifier des paramètres optionnels (et privés) d'une "
 "interface réseau sans fil.\n"
 "\n"
 "Impriv permet de manipuler les paramètres et réglages spécifiques à\n"
diff --git a/perl-install/share/po/fur.po b/perl-install/share/po/fur.po
index d7697cec4..2bd793f30 100644
--- a/perl-install/share/po/fur.po
+++ b/perl-install/share/po/fur.po
@@ -9644,7 +9644,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9660,13 +9660,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9677,17 +9677,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ga.po b/perl-install/share/po/ga.po
index ed6d26124..1bb867a0f 100644
--- a/perl-install/share/po/ga.po
+++ b/perl-install/share/po/ga.po
@@ -9684,7 +9684,7 @@ msgstr "Stáisiún Cluichí"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9700,13 +9700,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9717,17 +9717,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/gl.po b/perl-install/share/po/gl.po
index 202885043..c7e5df03a 100644
--- a/perl-install/share/po/gl.po
+++ b/perl-install/share/po/gl.po
@@ -10882,7 +10882,7 @@ msgstr "Fragmentación"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Argumentos extra do comando iwconfig"
 
 #: network/netconnect.pm:1034
@@ -10903,13 +10903,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Argumentos extra do comando iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10920,17 +10920,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Argumentos extra do comando iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/he.po b/perl-install/share/po/he.po
index 7d5971878..7af78203c 100644
--- a/perl-install/share/po/he.po
+++ b/perl-install/share/po/he.po
@@ -10432,7 +10432,7 @@ msgstr "פיצוליות"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwconfig"
 
 #: network/netconnect.pm:1034
@@ -10453,13 +10453,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10467,7 +10467,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"הפקודה Iwspyמשמשת להגדרת טווח כתובות ברשת אלחוטית\n"
+"הפקודה iwspyמשמשת להגדרת טווח כתובות ברשת אלחוטית\n"
 "לצורך בדיקת איכות החיבור לכל אחת מכתובות אלו.\n"
 "\n"
 "מידע זה זמין גם ב /proc/net/wireless :\n"
@@ -10477,17 +10477,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "משתנים נוספים עבור פקודת lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10497,9 +10497,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"הפקודה Iwpriv מאפשרת להגדיר משתנים (פרטיים) של רשת אלחוטית\n"
+"הפקודה iwpriv מאפשרת להגדיר משתנים (פרטיים) של רשת אלחוטית\n"
 "\n"
-"הפקודה Iwpriv מאפשרת להגדיר משתנים ומאפיינים ייחודיים לכל מנהל התקן\n"
+"הפקודה iwpriv מאפשרת להגדיר משתנים ומאפיינים ייחודיים לכל מנהל התקן\n"
 "(בניגוד ל-iwconfig שמגדירה את המאפיינים המשותפים).\n"
 "\n"
 "בתיאוריה, התיעוד של כל מנהל התקן אמור להסביר למה כל משתנה מיועד\n"
diff --git a/perl-install/share/po/hi.po b/perl-install/share/po/hi.po
index cc0d8d152..1de667e73 100644
--- a/perl-install/share/po/hi.po
+++ b/perl-install/share/po/hi.po
@@ -10543,7 +10543,7 @@ msgstr "विखंडीकरण"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "एलडब्लूकॉन्फ़िग कॉमाण्ड के अतिरिक्त प्राचर (आरगूमेन्ट)"
 
 #: network/netconnect.pm:1034
@@ -10564,13 +10564,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "एलडब्लूस्पाई कॉमाण्ड के अतिरिक्त प्राचर"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10588,17 +10588,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "एलडब्लूप्रिव कॉमाण्ड के अतिरिक्त प्राचर"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10608,11 +10608,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"एलडब्लूप्रिव (Iwpriv) एक बेतार नेटवर्क इन्टरफ़ेस के वैकल्पिक (व्यक्तिगत) पैरामीटरों की "
+"एलडब्लूप्रिव (iwpriv) एक बेतार नेटवर्क इन्टरफ़ेस के वैकल्पिक (व्यक्तिगत) पैरामीटरों की "
 "स्थापना को सक्रिय\n"
 "करता है।\n"
 "\n"
-"एलडब्लूप्रिव (Iwpriv) पैरामीटरों के साथ व्यवहार करता है और प्रत्येक चालक के लिए विशिष्ट "
+"एलडब्लूप्रिव (iwpriv) पैरामीटरों के साथ व्यवहार करता है और प्रत्येक चालक के लिए विशिष्ट "
 "समायोजनों को करता है\n"
 "(ना कि आईडब्लूकॉन्फ़िग के जैसे जो कि सामान्य जैसों के साथ व्यवहार करता है।\n"
 "\n"
@@ -27002,7 +27002,7 @@ msgstr "संसाधन असफ़ल"
 #~ "जैसे कि, ``io=0x300 irq=7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
diff --git a/perl-install/share/po/hr.po b/perl-install/share/po/hr.po
index cb8042317..8a0943f5f 100644
--- a/perl-install/share/po/hr.po
+++ b/perl-install/share/po/hr.po
@@ -10737,7 +10737,7 @@ msgstr "Igračka radna stanica"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10753,13 +10753,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10770,17 +10770,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/hu.po b/perl-install/share/po/hu.po
index 2eca925e8..b354cca51 100644
--- a/perl-install/share/po/hu.po
+++ b/perl-install/share/po/hu.po
@@ -11214,8 +11214,8 @@ msgstr "Töredezés"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Az Iwconfig program extra argumentumai"
+msgid "iwconfig command extra arguments"
+msgstr "Az iwconfig program extra argumentumai"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11235,13 +11235,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Az Iwspy program extra argumentumai"
+msgid "iwspy command extra arguments"
+msgstr "Az iwspy program extra argumentumai"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11249,7 +11249,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Az Iwspy program funkciója vezeték nélküli hálózati csatolók\n"
+"Az iwspy program funkciója vezeték nélküli hálózati csatolók\n"
 "címlistáinak beállítása és kapcsolatminőségi információk lekérdezése\n"
 "azoktól.\n"
 "\n"
@@ -11260,17 +11260,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Az Iwpriv program extra argumentumai"
+msgid "iwpriv command extra arguments"
+msgstr "Az iwpriv program extra argumentumai"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11280,11 +11280,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Az Iwpriv lehetővé teszi egy vezeték nélküli hálózati csatoló\n"
+"Az iwpriv lehetővé teszi egy vezeték nélküli hálózati csatoló\n"
 "opcionális paramétereinek beállítását.\n"
 "\n"
-"Az Iwpriv meghajtónként elkülönülten kezeli a paramétereket és\n"
-"beállításokat (szemben az Iwconfig programmal, amely általános\n"
+"Az iwpriv meghajtónként elkülönülten kezeli a paramétereket és\n"
+"beállításokat (szemben az iwconfig programmal, amely általános\n"
 "beállításokat kezel).\n"
 "\n"
 "Elméletileg az eszközmeghajtók dokumentációja információt tartalmaz\n"
diff --git a/perl-install/share/po/id.po b/perl-install/share/po/id.po
index 02fdc1b25..3bb967c2a 100644
--- a/perl-install/share/po/id.po
+++ b/perl-install/share/po/id.po
@@ -11348,8 +11348,8 @@ msgstr "Fragmentasi"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Argumen tambahan perintah Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Argumen tambahan perintah iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11369,13 +11369,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Argumen tambahan perintah Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Argumen tambahan perintah iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11383,7 +11383,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy digunakan untuk menentukan daftar alamat pada antarmuka\n"
+"iwspy digunakan untuk menentukan daftar alamat pada antarmuka\n"
 "jaringan nirkabel dan membaca kualitas informasi link dari \n"
 "setiap alamat.\n"
 "\n"
@@ -11394,17 +11394,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Argumen tambahan perintah Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Argumen tambahan perintah iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11414,10 +11414,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv aktif untuk menentukan paramater opsional (privat) dari antarmuka\n"
+"iwpriv aktif untuk menentukan paramater opsional (privat) dari antarmuka\n"
 "jaringan nirkabel.\n"
 "\n"
-"Iwpriv berhubungan dengan parameter dan setting khusus untuk setiap driver\n"
+"iwpriv berhubungan dengan parameter dan setting khusus untuk setiap driver\n"
 "(kebalikan dengan iwconfig yang berhubungan dengan setting umum).\n"
 "\n"
 "Secara teori, dokumentasi untuk setiap driver divais harus mengindikasikan\n"
diff --git a/perl-install/share/po/is.po b/perl-install/share/po/is.po
index a638e7392..4f94030ce 100644
--- a/perl-install/share/po/is.po
+++ b/perl-install/share/po/is.po
@@ -11055,7 +11055,7 @@ msgstr "Slitnir-pakkar"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Aukaviðföng fyrir iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11077,13 +11077,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Auka viðföng fyrir iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11091,7 +11091,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy er notað til að setja lista af addressum á þráðlausri nettengingu\n"
+"iwspy er notað til að setja lista af addressum á þráðlausri nettengingu\n"
 "og lesa síðan til baka gæði tengingar við hvern og einn.\n"
 "\n"
 "Þetta eru sömu upplýsingarnar og eru í /proc/net/wireless :\n"
@@ -11101,17 +11101,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Auka viðföng fyrir Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Auka viðföng fyrir iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11121,9 +11121,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv er notað til að setja aukaleg (prívat) viðföng á þráðlausu neti\n"
+"iwpriv er notað til að setja aukaleg (prívat) viðföng á þráðlausu neti\n"
 "\n"
-"Iwpriv sér um sérhæfð viðföng og stillingar fyrir hvern rekil (andstætt\n"
+"iwpriv sér um sérhæfð viðföng og stillingar fyrir hvern rekil (andstætt\n"
 "við iwconfig sem sér um þessa almennu).\n"
 "\n"
 "Samkvæmt bókinni ætti hver rekill að segja til um sín mismunandi vistföng,\n"
diff --git a/perl-install/share/po/it.po b/perl-install/share/po/it.po
index 5fadbe458..dc9c1f8b0 100644
--- a/perl-install/share/po/it.po
+++ b/perl-install/share/po/it.po
@@ -11232,7 +11232,7 @@ msgstr "Frammentazione"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 "Argomenti supplementari per il\n"
 "comando iwconfig"
@@ -11255,7 +11255,7 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 "Argomenti supplementari per il\n"
 "comando iwspy"
@@ -11263,7 +11263,7 @@ msgstr ""
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11271,7 +11271,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy è utilizzato per preparare un elenco di indirizzi di una interfaccia "
+"iwspy è utilizzato per preparare un elenco di indirizzi di una interfaccia "
 "di\n"
 "rete wireless e verificare la qualità del collegamento con ognuno di essi.\n"
 "\n"
@@ -11282,7 +11282,7 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 "Argomenti supplementari per\n"
 "il comando iwpriv"
@@ -11290,11 +11290,11 @@ msgstr ""
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11304,10 +11304,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv permette di impostare dei parametri opzionali (privati) per una\n"
+"iwpriv permette di impostare dei parametri opzionali (privati) per una\n"
 "interfaccia di rete wireless\n"
 "\n"
-"Iwpriv gestisce parametri e impostazioni specifici per ogni driver\n"
+"iwpriv gestisce parametri e impostazioni specifici per ogni driver\n"
 "(al contrario di iwconfig che gestisce quelli generali).\n"
 "In teoria, il relativo manuale dovrebbe indicare come utilizzare questi\n"
 "parametri specifici del dispositivo e il loro effetto.\n"
diff --git a/perl-install/share/po/ja.po b/perl-install/share/po/ja.po
index fa3dd15d9..a14678bf6 100644
--- a/perl-install/share/po/ja.po
+++ b/perl-install/share/po/ja.po
@@ -10914,7 +10914,7 @@ msgstr "フラグメンテーション"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "iwconfigコマンドの補助引数"
 
 #: network/netconnect.pm:1034
@@ -10935,13 +10935,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "iwspyコマンドの補助引数"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10959,17 +10959,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "iwprivコマンドの補助引数"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ko.po b/perl-install/share/po/ko.po
index ac80bedd0..1f6db664c 100644
--- a/perl-install/share/po/ko.po
+++ b/perl-install/share/po/ko.po
@@ -10190,7 +10190,7 @@ msgstr "게임 스테이션"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10206,13 +10206,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10223,17 +10223,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ky.po b/perl-install/share/po/ky.po
index c4ed8e3cb..3770bf2d0 100644
--- a/perl-install/share/po/ky.po
+++ b/perl-install/share/po/ky.po
@@ -10373,7 +10373,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10389,13 +10389,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10406,17 +10406,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/lt.po b/perl-install/share/po/lt.po
index e75667883..78ab86076 100644
--- a/perl-install/share/po/lt.po
+++ b/perl-install/share/po/lt.po
@@ -10106,7 +10106,7 @@ msgstr "Žaidimų stotis"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10122,13 +10122,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10139,17 +10139,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ltg.po b/perl-install/share/po/ltg.po
index a9a1db367..9448b0e20 100644
--- a/perl-install/share/po/ltg.po
+++ b/perl-install/share/po/ltg.po
@@ -10292,7 +10292,7 @@ msgstr "Fragmentaceja"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10308,13 +10308,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10325,17 +10325,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/lv.po b/perl-install/share/po/lv.po
index c0325b688..1c75b9cfa 100644
--- a/perl-install/share/po/lv.po
+++ b/perl-install/share/po/lv.po
@@ -10228,7 +10228,7 @@ msgstr "Spēļu dators"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10244,13 +10244,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10261,17 +10261,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/mk.po b/perl-install/share/po/mk.po
index 272a8bd61..332117bbf 100644
--- a/perl-install/share/po/mk.po
+++ b/perl-install/share/po/mk.po
@@ -10925,7 +10925,7 @@ msgstr "Фрагментација"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10941,13 +10941,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10958,17 +10958,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/mn.po b/perl-install/share/po/mn.po
index 34ebc1474..aa19cc15c 100644
--- a/perl-install/share/po/mn.po
+++ b/perl-install/share/po/mn.po
@@ -9722,7 +9722,7 @@ msgstr "Тоглоом"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9738,13 +9738,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9755,17 +9755,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ms.po b/perl-install/share/po/ms.po
index a0345b3e5..46876d643 100644
--- a/perl-install/share/po/ms.po
+++ b/perl-install/share/po/ms.po
@@ -9766,7 +9766,7 @@ msgstr "Dokumentasi"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, fuzzy, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
 
 #: network/netconnect.pm:1034
@@ -9782,13 +9782,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, fuzzy, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9799,17 +9799,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, fuzzy, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Hujah teruk ke arahan pengguna\n"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/mt.po b/perl-install/share/po/mt.po
index 434471c90..09d50baf0 100644
--- a/perl-install/share/po/mt.po
+++ b/perl-install/share/po/mt.po
@@ -10961,7 +10961,7 @@ msgstr "Frammentazzjoni"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "parametri oħra għall-kmand iwconfig"
 
 #: network/netconnect.pm:1034
@@ -10982,13 +10982,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "parametri oħra għall-kmand iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10996,7 +10996,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy jintuża biex tissettja lista ta' indirizzi fuq interfaċċja tan-\n"
+"iwspy jintuża biex tissettja lista ta' indirizzi fuq interfaċċja tan-\n"
 "network wireless u biex taqra lura informazzjoni dwar il-kwalità tal-link\n"
 "minn kull wieħed minn dawn.\n"
 "\n"
@@ -11007,17 +11007,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "parametri oħra għall-kmand iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11027,10 +11027,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv jippermettilek tissettja parametri opzjonali (privati) għall-\n"
+"iwpriv jippermettilek tissettja parametri opzjonali (privati) għall-\n"
 "interfaċċja tan-network wireless.\n"
 "\n"
-"Iwpriv jittratta dwar parametri speċifiċi għal kull drajver (filwaqt li\n"
+"iwpriv jittratta dwar parametri speċifiċi għal kull drajver (filwaqt li\n"
 "iwconfig jittratta dwar parametri ġeneriċi).\n"
 "\n"
 "Teoretikament, id-dokumentazzjoni ta' kull drajver għandu jindika kif\n"
diff --git a/perl-install/share/po/nb.po b/perl-install/share/po/nb.po
index 5933ab737..24c1b1f57 100644
--- a/perl-install/share/po/nb.po
+++ b/perl-install/share/po/nb.po
@@ -11182,8 +11182,8 @@ msgstr "Fragmentering"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig-kommando ekstra argumenter"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig-kommando ekstra argumenter"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11203,13 +11203,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy-kommando ekstra argumenter"
+msgid "iwspy command extra arguments"
+msgstr "iwspy-kommando ekstra argumenter"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11217,7 +11217,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy blir brukt for å sette en liste med adresser i et trådløst "
+"iwspy blir brukt for å sette en liste med adresser i et trådløst "
 "nettverksgrensesnitt\n"
 "og for å lese tilbake kvalitet på en link for hver av dem.\n"
 "\n"
@@ -11229,17 +11229,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv-kommando ekstra argumenter"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv-kommando ekstra argumenter"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11249,10 +11249,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv gjør det mulig å sette opp valgfrie (private) parametre for et "
+"iwpriv gjør det mulig å sette opp valgfrie (private) parametre for et "
 "trådløst nettverksgrensesnitt.\n"
 "\n"
-"Iwpriv hånderer parametere og oppsett spesifikt for hver driver (i "
+"iwpriv hånderer parametere og oppsett spesifikt for hver driver (i "
 "motsetning til\n"
 "iwconfig som håndterer generelle).\n"
 "\n"
diff --git a/perl-install/share/po/nl.po b/perl-install/share/po/nl.po
index dea99b1c9..d2862a7ee 100644
--- a/perl-install/share/po/nl.po
+++ b/perl-install/share/po/nl.po
@@ -11230,7 +11230,7 @@ msgstr "Fragmentatie"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Extra argumenten voor iwconfig-opdracht"
 
 #: network/netconnect.pm:1034
@@ -11251,13 +11251,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Extra argumenten voor iwspy-opdracht"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11265,7 +11265,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy is bedoeld om een adressenlijst in een draadloze netwerkinterface\n"
+"iwspy is bedoeld om een adressenlijst in een draadloze netwerkinterface\n"
 "in te stellen en om informatie over de kwaliteit van de verbinding voor\n"
 "elk van deze adressen terug te lezen.\n"
 "\n"
@@ -11276,17 +11276,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Extra argumenten voor iwpriv-opdracht"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11296,10 +11296,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv maakt het mogelijk optionele (private) parameters van een draadloze\n"
+"iwpriv maakt het mogelijk optionele (private) parameters van een draadloze\n"
 "netwerkinterface in te stellen.\n"
 "\n"
-"Iwpriv gaat over parameters en instellingen specifiek voor ieder\n"
+"iwpriv gaat over parameters en instellingen specifiek voor ieder\n"
 "stuurprogramma (in tegenstelling tot iwconfig, die over algemene\n"
 "stuurprogramma's gaat).\n"
 "\n"
diff --git a/perl-install/share/po/nn.po b/perl-install/share/po/nn.po
index e1e9bc26d..7729c4d2d 100644
--- a/perl-install/share/po/nn.po
+++ b/perl-install/share/po/nn.po
@@ -10629,7 +10629,7 @@ msgstr "Fragmentering"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Ekstraargument for lwconfig-kommandoen"
 
 #: network/netconnect.pm:1034
@@ -10650,13 +10650,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Ekstraargument for lwspy-kommandoen"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10664,7 +10664,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy vert brukt til å laga ei liste over adresser i eit trådlaust "
+"iwspy vert brukt til å laga ei liste over adresser i eit trådlaust "
 "nettverks- grensesnitt, og for å lesa tilbake sambandskvaliteten for kvar av "
 "desse.\n"
 "\n"
@@ -10675,17 +10675,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Ekstraargument for lwpriv-kommandoen"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10695,10 +10695,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv gjer det mogleg å setja opp valfrie (private) parametrar til "
+"iwpriv gjer det mogleg å setja opp valfrie (private) parametrar til "
 "trådlause nettverkgrensesnitt.\n"
 "\n"
-"Iwpriv handterer parametrar og innstillingar spesifikk til kvar drivar (i "
+"iwpriv handterer parametrar og innstillingar spesifikk til kvar drivar (i "
 "motsetning til\n"
 "iwconfig, som handterer generelle parametrar).\n"
 "\n"
diff --git a/perl-install/share/po/pa_IN.po b/perl-install/share/po/pa_IN.po
index 282fbcfab..fd24aff07 100644
--- a/perl-install/share/po/pa_IN.po
+++ b/perl-install/share/po/pa_IN.po
@@ -10045,8 +10045,8 @@ msgstr "ਵਿਭਾਗੀਕਰਨ"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10066,13 +10066,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
+msgid "iwspy command extra arguments"
+msgstr "iwspy ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10080,7 +10080,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy ਵਾਇਰਲੈੱਸ ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਵਿੱਚ ਸਿਰਨਾਵਿਆਂ ਦੀ ਸੂਚੀ ਨਿਰਧਾਰਿਤ ਕਰਨ\n"
+"iwspy ਵਾਇਰਲੈੱਸ ਨੈੱਟਵਰਕ ਇੰਟਰਫੇਸ ਵਿੱਚ ਸਿਰਨਾਵਿਆਂ ਦੀ ਸੂਚੀ ਨਿਰਧਾਰਿਤ ਕਰਨ\n"
 "ਲਈ ਅਤੇ ਉਹਨਾਂ ਲਈ ਸੰਬੰਧ ਜਾਣਕਾਰੀ ਦੀ ਪਿਛਲੀ ਖਾਸੀਅਤ ਪੜਨ ਲਈ ਵਰਤਿਆ ਜਾਂਦਾ ਹੈ।\n"
 "\n"
 "ਇਹ ਜਾਣਕਾਰੀ /proc/net/wireless ਵਿੱਚ ਉਪਲੱਬਧ ਜਾਣਕਾਰੀ :\n"
@@ -10090,17 +10090,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv ਕਮਾਂਡ ਵਾਧੂ ਆਰਗੂਮੈਂਟ"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/pl.po b/perl-install/share/po/pl.po
index 18eb3f39c..a9437664a 100644
--- a/perl-install/share/po/pl.po
+++ b/perl-install/share/po/pl.po
@@ -11157,7 +11157,7 @@ msgstr "Fragmentacja"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Dodatkowe argumenty dla polecenia iwconfig"
 
 #: network/netconnect.pm:1034
@@ -11179,13 +11179,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Dodatkowe argumenty polecenia iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11204,17 +11204,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Dodatkowe argumenty polecenia iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/pt.po b/perl-install/share/po/pt.po
index 9ce5f8605..d63ba0374 100644
--- a/perl-install/share/po/pt.po
+++ b/perl-install/share/po/pt.po
@@ -11115,8 +11115,8 @@ msgstr "Fragmentação"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Argumentos extra do comando Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Argumentos extra do comando iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11137,13 +11137,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Argumentos extra do comando lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11151,7 +11151,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"O Iwspy é usado para definir uma lista de endereços na interface\n"
+"O iwspy é usado para definir uma lista de endereços na interface\n"
 "de rede wireless e para monitorizar a informação da ligação para cada um\n"
 "\n"
 "Esta informação é a mesma que a disponível em /proc/net/wireless:\n"
@@ -11161,17 +11161,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Argumentos extra do comando lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11181,10 +11181,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"O Iwpriv permite configurar parâmetros opcionais (privados) de um\n"
+"O iwpriv permite configurar parâmetros opcionais (privados) de um\n"
 "interface de rede.\n"
 "\n"
-"O Iwpriv lida com parâmetros e definições específicas para cada driver (em\n"
+"O iwpriv lida com parâmetros e definições específicas para cada driver (em\n"
 "oposição ao iwconfig que lida com os genéricos).\n"
 "\n"
 "Em teoria, a documentação de cada dispositivo deve indicar como usar\n"
diff --git a/perl-install/share/po/pt_BR.po b/perl-install/share/po/pt_BR.po
index be4720843..775c46aa1 100644
--- a/perl-install/share/po/pt_BR.po
+++ b/perl-install/share/po/pt_BR.po
@@ -11455,8 +11455,8 @@ msgstr "Fragmentação"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Argumentos extras do comando Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Argumentos extras do comando iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11476,13 +11476,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Argumento extras do comando iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11490,7 +11490,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"O Iwspy é usado para configurar uma lista de endereços numa interface de \n"
+"O iwspy é usado para configurar uma lista de endereços numa interface de \n"
 "rede wireless e para identificar a qualidade do link para cada um deles.\n"
 "\n"
 "Esta é a mesma informação disponível em /proc/net/wireless: qualidade do\n"
@@ -11500,17 +11500,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Argumentos extras do comando iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11520,7 +11520,7 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"O Iwpriv possibilita a configuração de parâmetros opcionais (privados) de "
+"O iwpriv possibilita a configuração de parâmetros opcionais (privados) de "
 "uma interface de rede\n"
 "wireless \n"
 "\n"
diff --git a/perl-install/share/po/ro.po b/perl-install/share/po/ro.po
index 0e3271254..1a7cb72e9 100644
--- a/perl-install/share/po/ro.po
+++ b/perl-install/share/po/ro.po
@@ -9853,7 +9853,7 @@ msgstr "Staţie de lucru pt. jocuri"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9869,13 +9869,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9886,17 +9886,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ru.po b/perl-install/share/po/ru.po
index d79f1730c..4a288d48b 100644
--- a/perl-install/share/po/ru.po
+++ b/perl-install/share/po/ru.po
@@ -11153,8 +11153,8 @@ msgstr "Фрагментация"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Дополнительные аргументы команды Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Дополнительные аргументы команды iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11174,13 +11174,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Дополнительные аргументы команды Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Дополнительные аргументы команды iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11188,7 +11188,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy используется для настройки списка адресов беспроводного\n"
+"iwspy используется для настройки списка адресов беспроводного\n"
 "сетевого интерфейса и получения информации о качестве линка\n"
 "каждого из них.\n"
 "\n"
@@ -11199,17 +11199,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Дополнительные аргументы команды Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Дополнительные аргументы команды iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11219,11 +11219,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv позволяет установить опциональные (собственные) параметры "
+"iwpriv позволяет установить опциональные (собственные) параметры "
 "беспроводного сетевого\n"
 "интерфейса\n"
 "\n"
-"Iwpriv работает с параметрами и установками, специфичными для каждого "
+"iwpriv работает с параметрами и установками, специфичными для каждого "
 "драйвера (в то время как\n"
 "iwconfig работает только с общими параметрами).\n"
 "\n"
diff --git a/perl-install/share/po/sc.po b/perl-install/share/po/sc.po
index 52d8c459a..a31a0a040 100644
--- a/perl-install/share/po/sc.po
+++ b/perl-install/share/po/sc.po
@@ -9748,7 +9748,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9764,13 +9764,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9781,17 +9781,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/sk.po b/perl-install/share/po/sk.po
index 4f5ca2370..a9fe8a76c 100644
--- a/perl-install/share/po/sk.po
+++ b/perl-install/share/po/sk.po
@@ -11149,7 +11149,7 @@ msgstr "Fragmentácia"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "extra argumenty pre príkaz lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11171,13 +11171,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "extra argumenty pre príkaz lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11196,17 +11196,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "extra argumenty pre príkaz lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/sl.po b/perl-install/share/po/sl.po
index 34a3c3400..2ba87bfd2 100644
--- a/perl-install/share/po/sl.po
+++ b/perl-install/share/po/sl.po
@@ -11064,8 +11064,8 @@ msgstr "Drobitev (fragmentacija)"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Posebni argumenti ukaza Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Posebni argumenti ukaza iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11084,13 +11084,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Posebni argumenti ukaza Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Posebni argumenti ukaza iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11098,7 +11098,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy uporabljamo za sestavo seznama naslovov v brezžičnem omrežju\n"
+"iwspy uporabljamo za sestavo seznama naslovov v brezžičnem omrežju\n"
 "in za pridobivanje informacij o kakovosti povezave za vsakega izmed njih.\n"
 "\n"
 "Iste informacije lahko dobimo tudi tudi v /proc/net/wireless :\n"
@@ -11108,17 +11108,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Posebni argumenti ukaza Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Posebni argumenti ukaza iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11128,11 +11128,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv omogoča nastavitve poljubnih (zasebnih) nastavitev vmesnika za "
+"iwpriv omogoča nastavitve poljubnih (zasebnih) nastavitev vmesnika za "
 "brezžično omrežno\n"
 "povezavo.\n"
 "\n"
-"Iwpriv omogoča posebne nastavitve za vsak posmični gonilnik ( za razliko \n"
+"iwpriv omogoča posebne nastavitve za vsak posmični gonilnik ( za razliko \n"
 "od iwconfig, ki omogoča splošne nastavitve).\n"
 "\n"
 "Teoretično naj bi dokumentacija za vsak gonilnik vsebovala napotke o "
diff --git a/perl-install/share/po/sq.po b/perl-install/share/po/sq.po
index 8a29aac4e..0c36922e3 100644
--- a/perl-install/share/po/sq.po
+++ b/perl-install/share/po/sq.po
@@ -11007,7 +11007,7 @@ msgstr "Stacion Lojërash"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -11023,13 +11023,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11040,17 +11040,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/sr.po b/perl-install/share/po/sr.po
index 15b3d465c..c1fa5cc9b 100644
--- a/perl-install/share/po/sr.po
+++ b/perl-install/share/po/sr.po
@@ -10917,7 +10917,7 @@ msgstr "Станица за игру"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10933,13 +10933,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10950,17 +10950,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/sr@Latn.po b/perl-install/share/po/sr@Latn.po
index 565adf54e..06fd18a8a 100644
--- a/perl-install/share/po/sr@Latn.po
+++ b/perl-install/share/po/sr@Latn.po
@@ -10925,7 +10925,7 @@ msgstr "Stanica za igru"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10941,13 +10941,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10958,17 +10958,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/sv.po b/perl-install/share/po/sv.po
index 8d0446a8d..798b947fd 100644
--- a/perl-install/share/po/sv.po
+++ b/perl-install/share/po/sv.po
@@ -11101,7 +11101,7 @@ msgstr "Fragmentering"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "extra-argument för lwconfig-kommandot"
 
 #: network/netconnect.pm:1034
@@ -11123,7 +11123,7 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 "iwspy-kommandot\n"
 "extra-argument"
@@ -11131,7 +11131,7 @@ msgstr ""
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11151,17 +11151,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "iwpriv extra argument"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/ta.po b/perl-install/share/po/ta.po
index 4213dead8..378488cf3 100644
--- a/perl-install/share/po/ta.po
+++ b/perl-install/share/po/ta.po
@@ -10475,7 +10475,7 @@ msgstr "விளையாட்டுகள்"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10491,13 +10491,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10508,17 +10508,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/tg.po b/perl-install/share/po/tg.po
index cda15c16f..54f95da2f 100644
--- a/perl-install/share/po/tg.po
+++ b/perl-install/share/po/tg.po
@@ -11211,8 +11211,8 @@ msgstr "Фрагментатсия"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Нишонвандҳои иловгии фармони Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Нишонвандҳои иловгии фармони iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -11232,13 +11232,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Нишонвандҳои иловагии фармони Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Нишонвандҳои иловагии фармони iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11246,7 +11246,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy барои барпосозии рӯйхати суроғаҳо дар интерфейси беноқили шабакавӣ ва "
+"iwspy барои барпосозии рӯйхати суроғаҳо дар интерфейси беноқили шабакавӣ ва "
 "хондани маълумот оиди сифати пайвстшавӣ\n"
 "барои ҳар яки онҳо, истифода бурда мешавад.\n"
 "\n"
@@ -11257,17 +11257,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Нишонвандҳои иловагии фармони Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Нишонвандҳои иловагии фармони iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11277,11 +11277,11 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv имконияти барпосозии параметрҳои интихобӣ дар интерфейси беноқили "
+"iwpriv имконияти барпосозии параметрҳои интихобӣ дар интерфейси беноқили "
 "шабкавӣ\n"
 "медиҳад.\n"
 "\n"
-"Iwpriv бо параметрҳо ва гузоришҳое кор мекунад, ки барои ҳар як гардонанда "
+"iwpriv бо параметрҳо ва гузоришҳое кор мекунад, ки барои ҳар як гардонанда "
 "махсус аст (ҳоло он ки iwconfig\n"
 "бо параметрҳои умумӣ кор мекунад).\n"
 "\n"
diff --git a/perl-install/share/po/th.po b/perl-install/share/po/th.po
index 8edc8d7d4..4c7810516 100644
--- a/perl-install/share/po/th.po
+++ b/perl-install/share/po/th.po
@@ -9900,7 +9900,7 @@ msgstr "Workstation ที่ทำงาน"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9916,13 +9916,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9933,17 +9933,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/tl.po b/perl-install/share/po/tl.po
index 38910df9e..fb2f71aa0 100644
--- a/perl-install/share/po/tl.po
+++ b/perl-install/share/po/tl.po
@@ -11280,7 +11280,7 @@ msgstr "Fragmentation"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Mga extrang argument ng iwconfig na command"
 
 #: network/netconnect.pm:1034
@@ -11301,13 +11301,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Mga extrang argument ng iwspy na command"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11326,17 +11326,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Mga extrang argument ng iwpriv na command"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -28842,7 +28842,7 @@ msgstr "Pag-i-install nabigo"
 #~ "Halimbawa, ``io=0x300 irq=7''"
 
 #~ msgid ""
-#~ "Iwspy is used to set a list of addresses in a wireless network\n"
+#~ "iwspy is used to set a list of addresses in a wireless network\n"
 #~ "interface and to read back quality of link information for each of "
 #~ "those.\n"
 #~ "\n"
diff --git a/perl-install/share/po/tr.po b/perl-install/share/po/tr.po
index c41a96f9c..64128c879 100644
--- a/perl-install/share/po/tr.po
+++ b/perl-install/share/po/tr.po
@@ -10701,7 +10701,7 @@ msgstr "Oyun Konsolu"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10717,13 +10717,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10734,17 +10734,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/uk.po b/perl-install/share/po/uk.po
index b7e165372..8501f3a2a 100644
--- a/perl-install/share/po/uk.po
+++ b/perl-install/share/po/uk.po
@@ -11109,7 +11109,7 @@ msgstr "Фрагментація"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "додаткові аргументи команди lwconfig"
 
 #: network/netconnect.pm:1034
@@ -11131,13 +11131,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "додаткові аргументи команди lwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11156,17 +11156,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "додаткові аргументи команди lwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/uz.po b/perl-install/share/po/uz.po
index 6a69196e6..41fa3b4ae 100644
--- a/perl-install/share/po/uz.po
+++ b/perl-install/share/po/uz.po
@@ -9955,7 +9955,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9971,13 +9971,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -9988,17 +9988,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/uz@Latn.po b/perl-install/share/po/uz@Latn.po
index 857305a53..549650f38 100644
--- a/perl-install/share/po/uz@Latn.po
+++ b/perl-install/share/po/uz@Latn.po
@@ -9969,7 +9969,7 @@ msgstr ""
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -9985,13 +9985,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10002,17 +10002,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/share/po/vi.po b/perl-install/share/po/vi.po
index 661ddbc47..cfacfcccb 100644
--- a/perl-install/share/po/vi.po
+++ b/perl-install/share/po/vi.po
@@ -10968,8 +10968,8 @@ msgstr "Phân mảnh"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Tham số bổ sung cho lệnh Iwconfig"
+msgid "iwconfig command extra arguments"
+msgstr "Tham số bổ sung cho lệnh iwconfig"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10989,13 +10989,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Tham số bổ sung cho lệnh Iwspy"
+msgid "iwspy command extra arguments"
+msgstr "Tham số bổ sung cho lệnh iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11003,7 +11003,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy dùng để đặt ra danh sách các địa chỉ trong giao diện mạng\n"
+"iwspy dùng để đặt ra danh sách các địa chỉ trong giao diện mạng\n"
 "không dây và cho biết thông tin về chất lượng kết nối tới mỗi địa chỉ đó.\n"
 "\n"
 "Những thông tin này cũng giống như thông tin trong /proc/net/wireless :\n"
@@ -11012,17 +11012,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Tham số bổ sung cho lệnh Iwpriv"
+msgid "iwpriv command extra arguments"
+msgstr "Tham số bổ sung cho lệnh iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11032,10 +11032,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv có khả năng đặt các tham số tuỳ chọn (riêng biệt) cho giao diệnmạng "
+"iwpriv có khả năng đặt các tham số tuỳ chọn (riêng biệt) cho giao diệnmạng "
 "không dây.\n"
 "\n"
-"Iwpriv xử lý các tham số và tuỳ đặt cụ thể cho từng driver, (không giống "
+"iwpriv xử lý các tham số và tuỳ đặt cụ thể cho từng driver, (không giống "
 "nhưiwconfig làm việc với các driver thông thường).\n"
 "Về lý thuyết, tài liệu đi kèm mỗi driver các thiết bị sẽ hướng dẫn cách sử "
 "dụngcác lệnh đặc biệt và tác dụng của chúng.\n"
diff --git a/perl-install/share/po/wa.po b/perl-install/share/po/wa.po
index 94491de5e..c60ad3a0b 100644
--- a/perl-install/share/po/wa.po
+++ b/perl-install/share/po/wa.po
@@ -11049,7 +11049,7 @@ msgstr "Fragmintåcion"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr "Årgumints di rawete po iwconfig"
 
 # RATOURNAEDJE: ap, channel, commit, enc, power, retry, sens, txpower
@@ -11071,13 +11071,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr "Årgumints di rawete pol comande iwspy"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -11085,7 +11085,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy est eployî po defini ene djivêye d' adresses po ene eterface\n"
+"iwspy est eployî po defini ene djivêye d' adresses po ene eterface\n"
 "rantoele eyet po ndè lére l' informåcion sol cwålité do raloyaedje\n"
 "po tchaeskene di ces adresses la.\n"
 "\n"
@@ -11093,17 +11093,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr "Årgumints di rawete pol comande iwpriv"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -11113,10 +11113,10 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv vos permete di defini des tchuzes opcioneles (privêyes)\n"
+"iwpriv vos permete di defini des tchuzes opcioneles (privêyes)\n"
 "po ene eterface rantoele sins fyis.\n"
 "\n"
-"Iwpriv manaedje les parametes eyet apontiaedjes ki sont specifikes\n"
+"iwpriv manaedje les parametes eyet apontiaedjes ki sont specifikes\n"
 "a tchaeke mineu (adon ki iwconfig manaedje les cis ki sont djenerikes).\n"
 "\n"
 "E teyoreye, li documintåcion di tchaeke mineu dvreut dire\n"
diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index 16d750a48..0b0e6bef1 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -10779,8 +10779,8 @@ msgstr "块"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
-msgstr "Iwconfig 命令的额外参数"
+msgid "iwconfig command extra arguments"
+msgstr "iwconfig 命令的额外参数"
 
 #: network/netconnect.pm:1034
 #, c-format
@@ -10800,13 +10800,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
-msgstr "Iwspy 命令的额外参数"
+msgid "iwspy command extra arguments"
+msgstr "iwspy 命令的额外参数"
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10814,7 +10814,7 @@ msgid ""
 "\n"
 "See iwpspy(8) man page for further information."
 msgstr ""
-"Iwspy 可在无线网卡中设置地址列表, 并会逐一回读连接信息的质量。\n"
+"iwspy 可在无线网卡中设置地址列表, 并会逐一回读连接信息的质量。\n"
 "\n"
 "此信息与 /proc/net/wireless 中的相同: \n"
 "连接质量、信号强度和噪声级别。\n"
@@ -10823,17 +10823,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
-msgstr "Iwpriv 命令的额外参数"
+msgid "iwpriv command extra arguments"
+msgstr "iwpriv 命令的额外参数"
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
@@ -10843,9 +10843,9 @@ msgid ""
 "\n"
 "See iwpriv(8) man page for further information."
 msgstr ""
-"Iwpriv 允许为无线网卡设置可选(私有)的参数。\n"
+"iwpriv 允许为无线网卡设置可选(私有)的参数。\n"
 "\n"
-"Iwpriv 会分析您所给出的参数, 并对每个驱动程序分别加以设置(这与设置通用参数"
+"iwpriv 会分析您所给出的参数, 并对每个驱动程序分别加以设置(这与设置通用参数"
 "的\n"
 "iwconfig 刚好相反)。\n"
 "\n"
diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index d5b0a9e52..0b0cb289f 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -10486,7 +10486,7 @@ msgstr "破碎片段"
 
 #: network/netconnect.pm:1033 standalone/drakconnect:422
 #, c-format
-msgid "Iwconfig command extra arguments"
+msgid "iwconfig command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1034
@@ -10502,13 +10502,13 @@ msgstr ""
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
 #: network/netconnect.pm:1041 standalone/drakconnect:423
 #, c-format
-msgid "Iwspy command extra arguments"
+msgid "iwspy command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1042
 #, c-format
 msgid ""
-"Iwspy is used to set a list of addresses in a wireless network\n"
+"iwspy is used to set a list of addresses in a wireless network\n"
 "interface and to read back quality of link information for each of those.\n"
 "\n"
 "This information is the same as the one available in /proc/net/wireless :\n"
@@ -10519,17 +10519,17 @@ msgstr ""
 
 #: network/netconnect.pm:1051 standalone/drakconnect:424
 #, c-format
-msgid "Iwpriv command extra arguments"
+msgid "iwpriv command extra arguments"
 msgstr ""
 
 #: network/netconnect.pm:1052
 #, c-format
 msgid ""
-"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"iwpriv enable to set up optionals (private) parameters of a wireless "
 "network\n"
 "interface.\n"
 "\n"
-"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"iwpriv deals with parameters and setting specific to each driver (as opposed "
 "to\n"
 "iwconfig which deals with generic ones).\n"
 "\n"
diff --git a/perl-install/standalone/drakconnect b/perl-install/standalone/drakconnect
index 0c1ff1d7f..20c190f7d 100755
--- a/perl-install/standalone/drakconnect
+++ b/perl-install/standalone/drakconnect
@@ -23,7 +23,7 @@
 
 use strict;
 
-use lib qw(/usr/lib/libDrakX);
+#use lib qw(/usr/lib/libDrakX);
 
 use standalone;     #- warning, standalone must be loaded very first, for 'explanations'
 
@@ -419,9 +419,9 @@ sub build_notebook {
 			   } ([ N("Encryption key"), 'WIRELESS_ENC_KEY' ],
 			      [ N("RTS/CTS"), 'WIRELESS_RTS' ],
 			      [ N("Fragmentation"), 'WIRELESS_FRAG' ],
-			      [ N("Iwconfig command extra arguments"),  'WIRELESS_IWCONFIG' ],
-			      [ N("Iwspy command extra arguments"), 'WIRELESS_IWSPY' ],
-			      [ N("Iwpriv command extra arguments"), 'WIRELESS_IWPRIV' ],
+			      [ N("iwconfig command extra arguments"),  'WIRELESS_IWCONFIG' ],
+			      [ N("iwspy command extra arguments"), 'WIRELESS_IWSPY' ],
+			      [ N("iwpriv command extra arguments"), 'WIRELESS_IWPRIV' ],
 			     ),
 			),
 	       );