updated pot file

55 files changed, 697740 insertions, 671309 deletions

diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index d01bae879..68de457b8 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2003-05-15 18:30+0200\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -66,6 +66,11 @@ msgstr ""
 msgid "Restore partition table"
 msgstr ""
 
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Post-install configuration"
@@ -81,70 +86,6 @@ msgstr ""
 msgid "Type"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \\\"%s\\\": this option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \\\"%s\\\": the wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \\\"%s\\\": if Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
-"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
-"partition. Resizing can be performed without the loss of any data, provided\n"
-"you have previously defragmented the Windows partition and that it uses the\n"
-"FAT format. Backing up your data is strongly recommended.. Using this\n"
-"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
-"Windows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \\\"%s\\\": if you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandrake Linux system,\n"
-"choose this option. Be careful, because you will not be able to undo your\n"
-"choice after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \\\"%s\\\": this will simply erase everything on the drive and begin fresh,\n"
-"partitioning everything from scratch. All data on your disk will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \\\"%s\\\": choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
-"Guide''."
-msgstr ""
-
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -218,11 +159,6 @@ msgid ""
 "Try to reconfigure your connection."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \\\"%s\\\"."
-msgstr ""
-
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -381,11 +317,6 @@ msgstr ""
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Vietnamese \\\"numeric row\\\" QWERTY"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
 msgid "Swiss (French layout)"
 msgstr ""
 
@@ -409,13 +340,10 @@ msgstr ""
 msgid "Soundcard"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \\\"Share\\\" in konqueror and nautilus.\n"
-"\n"
-"\\\"Custom\\\" permit a per-user granularity.\n"
+"To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
 ""
 msgstr ""
 
@@ -535,6 +463,11 @@ msgstr ""
 msgid "Username"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Left \"Windows\" key"
+msgstr ""
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "dhcpd Server Configuration"
@@ -552,6 +485,11 @@ msgstr ""
 msgid "Guyana"
 msgstr ""
 
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
+
 #: ../../standalone/drakfloppy:1
 #, c-format
 msgid "Remove a module"
@@ -590,6 +528,11 @@ msgstr ""
 msgid "Choose an existing RAID to add to"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (modern \"Q\" model)"
+msgstr ""
+
 #: ../../standalone/drakboot:1
 #, c-format
 msgid "Lilo message not found"
@@ -617,47 +560,6 @@ msgstr ""
 msgid "/Autodetect _jazz drives"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \\\"root\\\" password. \\\"Root\\\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \\\"root\\\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \\\"root\\\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\\\"root\\\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \\\"root\\\" password -- it makes it far\n"
-"too easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will be the one you will have use the first time you\n"
-"connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \\\"%s\\\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \\\"%s\\\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, if your computer\n"
-"will never be connected to the internet or that you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \\\"%s\\\"."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -699,6 +601,88 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../install_messages.pm:1
+#, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this License. \n"
+"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
+"with the terms and conditions of this License is void and will terminate your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
+"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
+"of the possession and use of software components or arising out of  downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
+"and conditions of the license agreement for each component before using any component. Any question \n"
+"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of France.\n"
+"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+""
+msgstr ""
+
 #: ../../standalone/draksplash:1
 #, c-format
 msgid ""
@@ -716,23 +700,14 @@ msgstr ""
 msgid "LPD - Line Printer Daemon"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
 "\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \\\"%s\\\" to create a new entry; selecting an entry and\n"
-"clicking \\\"%s\\\" or \\\"%s\\\" to modify or remove it. \\\"%s\\\" validates your\n"
-"changes.\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
 "\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
+""
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -782,6 +757,110 @@ msgstr ""
 msgid "Show only for the selected day"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+""
+msgstr ""
+
 #: ../../Xconfig/card.pm:1
 #, c-format
 msgid "512 kB"
@@ -817,6 +896,14 @@ msgstr ""
 msgid "Security"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
+""
+msgstr ""
+
 #: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
 msgid "<control>Q"
@@ -883,6 +970,11 @@ msgstr ""
 msgid "You have not configured X. Are you sure you really want this?"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "What type of partitioning?"
@@ -977,11 +1069,6 @@ msgstr ""
 msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Network printer \\\"%s\\\", port %s"
-msgstr ""
-
 #: ../../network/drakfirewall.pm:1
 #, c-format
 msgid "POP and IMAP Server"
@@ -1022,9 +1109,45 @@ msgstr ""
 msgid "Remote lpd Printer Options"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ", TCP/IP host \\\"%s\\\", port %s"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
 
 #: ../../standalone/drakconnect:1
@@ -1248,11 +1371,6 @@ msgstr ""
 msgid "User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \\\"%s\\\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
 #: ../../fsedit.pm:1
 #, c-format
 msgid ""
@@ -1325,6 +1443,11 @@ msgstr ""
 msgid "Phone number"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Printer name, description, location"
@@ -1469,6 +1592,11 @@ msgid ""
 "in number of characters"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Enabling servers..."
@@ -1479,26 +1607,75 @@ msgstr ""
 msgid "Printing test page(s)..."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../fsedit.pm:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134\n"
-"module in \\\"/etc/modules\\\") nor installed xawtv, please send the\n"
-"results of \\\"lspcidrake -v -f\\\" to \\\"install\\@mandrakesoft.com\\\"\n"
-"with subject \\\"undetected TV card\\\".\n"
-"\n"
-"\n"
-"You can install it by typing \\\"urpmi xawtv\\\" as root, in a console."
+"There is already a partition with mount point %s\n"
+""
 msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"There is already a partition with mount point %s\n"
-""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 
 #: ../../lang.pm:1
@@ -1536,6 +1713,31 @@ msgstr ""
 msgid " / Region"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+""
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -1577,9 +1779,27 @@ msgstr ""
 msgid "Is this the correct setting?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Running \\\"%s\\\" ..."
+msgid ""
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
@@ -1602,9 +1822,9 @@ msgstr ""
 msgid "Can't use broadcast with no NIS domain"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Georgian (\\\"Russian\\\" layout)"
+msgid "Removing printer \"%s\"..."
 msgstr ""
 
 #: ../../standalone/drakfloppy:1
@@ -1637,11 +1857,6 @@ msgstr ""
 msgid " on device: %s"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on Novell server \\\"%s\\\", printer \\\"%s\\\""
-msgstr ""
-
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "Remove Windows(TM)"
@@ -1738,6 +1953,35 @@ msgstr ""
 msgid "French Polynesia"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid "Support the OKI 4w and compatible winprinters."
@@ -1755,6 +1999,11 @@ msgstr ""
 msgid "Installing driver for %s card %s"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
+msgstr ""
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Enable Server"
@@ -1785,11 +2034,37 @@ msgstr ""
 msgid "Remove Windows"
 msgstr ""
 
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the applications menu."
+msgstr ""
+
 #: ../../harddrake/data.pm:1
 #, c-format
 msgid "Firewire controllers"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+
 #: ../../standalone/drakboot:1
 #, c-format
 msgid "System mode"
@@ -1815,6 +2090,20 @@ msgstr ""
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
+msgstr ""
+
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
@@ -1843,6 +2132,11 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Network printer \"%s\", port %s"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Please choose what network adapter will be connected to your Local Area Network."
@@ -1993,6 +2287,11 @@ msgstr ""
 msgid "Buttons emulation"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -2085,11 +2384,6 @@ msgstr ""
 msgid "Please wait, setting security options..."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Every printer needs a name (for example \\\"printer\\\"). The Description and Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-
 #: ../../harddrake/v4l.pm:1
 #, c-format
 msgid "Unknown|CPH05X (bt878) [many vendors]"
@@ -2156,18 +2450,6 @@ msgstr ""
 msgid "Normal modem connection"
 msgstr ""
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your computer.\n"
-"Then choose the \\\"TVout\\\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
-
 #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
 msgid "File Selection"
@@ -2243,13 +2525,6 @@ msgstr ""
 msgid "Palau"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"This command you can also use in the \\\"Printing command\\\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
-""
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "level"
@@ -2432,35 +2707,6 @@ msgstr ""
 msgid "Host %s"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
-"is best suited to particular types of configuration.\n"
-"\n"
-" * \\\"%s\\\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\\\"%s\\\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"with networks.) It's recommended that you use \\\"pdq\\\" if this is your first\n"
-"experience with GNU/Linux.\n"
-"\n"
-" * \\\"%s\\\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\\\"lpd \\\" printing system, so it compatible with older operating systems\n"
-"which may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \\\"pdq\\\". If you need to emulate a \\\"lpd\\\" server, make\n"
-"sure you turn on the \\\"cups-lpd \\\" daemon. \\\"%s\\\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Armenia"
@@ -2511,45 +2757,6 @@ msgstr ""
 msgid "Control and Shift keys simultaneously"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose which one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \\\"Linux name\\\", \\\"Windows name\\\"\n"
-"\\\"Capacity\\\".\n"
-"\n"
-"\\\"Linux name\\\" is structured: \\\"hard drive type\\\", \\\"hard drive number\\\",\n"
-"\\\"partition number\\\" (for example, \\\"hda1\\\").\n"
-"\n"
-"\\\"Hard drive type\\\" is \\\"hd\\\" if your hard dive is an IDE hard drive and\n"
-"\\\"sd\\\" if it is a SCSI hard drive.\n"
-"\n"
-"\\\"Hard drive number\\\" is always a letter after \\\"hd\\\" or \\\"sd\\\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \\\"a\\\" means \\\"master hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"b\\\" means \\\"slave hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"c\\\" means \\\"master hard drive on the secondary IDE controller\\\";\n"
-"\n"
-" * \\\"d\\\" means \\\"slave hard drive on the secondary IDE controller\\\".\n"
-"\n"
-"With SCSI hard drives, an \\\"a\\\" means \\\"lowest SCSI ID\\\", a \\\"b\\\" means\n"
-"\\\"second lowest SCSI ID\\\", etc.\n"
-"\n"
-"\\\"Windows name\\\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \\\"C:\\\")."
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \\\"halt\\\" instruction is used"
-msgstr ""
-
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid "secondary"
@@ -2621,24 +2828,19 @@ msgstr ""
 msgid "Auto-detect printers connected to this machine"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you may not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may have a Swiss\n"
-"keyboard. Or if you speak English but are located in Quebec, you may find\n"
-"yourself in the same situation where your native language and keyboard do\n"
-"not match. In either case, this installation step will allow you to select\n"
-"an appropriate keyboard from a list.\n"
+"XawTV isn't installed!\n"
 "\n"
-"Click on the \\\"%s\\\" button to be presented with the complete list of\n"
-"supported keyboards.\n"
 "\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"If you do have a TV card but DrakX has neither detected it (no bttv nor saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
 #: ../../any.pm:1
@@ -2651,6 +2853,14 @@ msgstr ""
 msgid "Bolivia"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"\n"
+""
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Bad package"
@@ -2666,6 +2876,15 @@ msgstr ""
 msgid "DrakSec Basic Options"
 msgstr ""
 
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type \"sndconfig\" in a console."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Romania"
@@ -2733,6 +2952,11 @@ msgid ""
 "Remove the loopback first"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the Mandrake Control Center, section \"Hardware\"/\"Printer\""
+msgstr ""
+
 #: ../../harddrake/data.pm:1
 #, c-format
 msgid "USB controllers"
@@ -2771,14 +2995,6 @@ msgid ""
 "%s"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You can also use the graphical interface \\\"xpdq\\\" for setting options and handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \\\"panic button\\\", an icon on the desktop, labeled with \\\"STOP Printer!\\\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
-""
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Remove the loopback file?"
@@ -2799,13 +3015,6 @@ msgstr ""
 msgid "Please choose your country."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \\\"%s\\\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-
 #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
 #, c-format
 msgid "Hard Disk Backup files..."
@@ -2940,14 +3149,6 @@ msgstr ""
 msgid "Mouse"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"The \\\"%s\\\" and \\\"%s\\\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
 #: ../../bootloader.pm:1
 #, c-format
 msgid "not enough room in /boot"
@@ -2986,42 +3187,56 @@ msgstr ""
 #: ../../help.pm:1
 #, c-format
 msgid ""
-"GNU/Linux is a multi-user system, meaning each user may have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \\\"root\\\", who is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configurations, protecting the system from unintentional or malicious\n"
-"changes that impact on the system as a whole. You will have to create at\n"
-"least one regular user for yourself -- this is the account which you should\n"
-"use for routine, day-to-day use. Although it is very easy to log in as\n"
-"\\\"root\\\" to do anything and everything, it may also be very dangerous! A\n"
-"very simple mistake could mean that your system will not work any more. If\n"
-"you make a serious mistake as a regular user, the worst that will happen is\n"
-"that you will lose some information, but not affect the entire system.\n"
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
 "\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in this field and copy it to the \\\"%s\\\" field, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the username. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \\\"root\\\" password, but that is no reason to neglect\n"
-"it by making it blank or too simple: after all, your files could be the\n"
-"ones at risk.\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
 "\n"
-"Once you click on \\\"%s\\\", you can add other users. Add a user for each one\n"
-"of your friends: your father or your sister, for example. Click \\\"%s\\\" when\n"
-"you have finished adding users.\n"
+"For Linux, there are a few possible options:\n"
 "\n"
-"Clicking the \\\"%s\\\" button allows you to change the default \\\"shell\\\" for\n"
-"that user (bash by default).\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
 "\n"
-"When you have finished adding users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \\\"%s\\\".\n"
-"If you are not interested in this feature, uncheck the \\\"%s\\\" box."
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
 #: ../../standalone/drakTermServ:1
@@ -3029,6 +3244,14 @@ msgstr ""
 msgid "No floppy drive available!"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+""
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Continue anyway?"
@@ -3068,6 +3291,11 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing on the printer \"%s\""
+msgstr ""
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
@@ -3078,16 +3306,6 @@ msgstr ""
 msgid "Restore From Tape"
 msgstr ""
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \\\"irq\\\" and \\\"io\\\" of your card.\n"
-""
-msgstr ""
-
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Choose the profile to configure"
@@ -3125,20 +3343,6 @@ msgid ""
 "Add the name as an exception to the handling of password aging by msec."
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \\\"lilo\\\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \\\"XSane\\\" from Multimedia/Graphics in the applications menu."
-msgstr ""
-
 #: ../../modules/interactive.pm:1
 #, c-format
 msgid "See hardware info"
@@ -3201,11 +3405,28 @@ msgstr ""
 msgid "Modify"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
+""
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Need hostname, username and password!"
 msgstr ""
 
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "HardDrake"
@@ -3266,6 +3487,11 @@ msgstr ""
 msgid "Connect..."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "not configured"
@@ -3281,20 +3507,6 @@ msgstr ""
 msgid "About"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \\\"localhost\\\" as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
-msgstr ""
-
 #: ../../network/network.pm:1
 #, c-format
 msgid "Proxies configuration"
@@ -3434,13 +3646,6 @@ msgstr ""
 msgid "Mount points must begin with a leading /"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \\\"COM1\\\" port under\n"
-"Windows is named \\\"ttyS0\\\" under GNU/Linux."
-msgstr ""
-
 #: ../../standalone/logdrake:1
 #, c-format
 msgid "Postfix Mail Server"
@@ -3739,11 +3944,6 @@ msgstr ""
 msgid "France"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \\\"%s\\\" on SMB/Windows server \\\"%s\\\""
-msgstr ""
-
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "browse"
@@ -3771,106 +3971,29 @@ msgstr ""
 msgid "Turkey"
 msgstr ""
 
-#: ../../install_messages.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake Linux distribution \n"
-"shall be called the \\\"Software Products\\\" hereafter. The Software Products include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this License. \n"
-"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
-"with the terms and conditions of this License is void and will terminate your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \\\"as is\\\", with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
-"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
-"of the possession and use of software components or arising out of  downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU General Public \n"
-"Licence, hereafter called \\\"GPL\\\", or of similar licenses. Most of these licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
-"and conditions of the license agreement for each component before using any component. Any question \n"
-"on a component license should be addressed to the component author and not to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\\\"Mandrake\\\", \\\"Mandrake Linux\\\" and associated logos are trademarks of MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of France.\n"
-"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-""
+msgid "Alcatel speedtouch usb"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \\\"%s\\\""
+msgid "Number of buttons"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Alcatel speedtouch usb"
+msgid "Vietnamese \"numeric row\" QWERTY"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Number of buttons"
+msgid "Module"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Module"
+msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
 msgstr ""
 
 #: ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
@@ -3903,6 +4026,11 @@ msgstr ""
 msgid "Configure all heads independently"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "NTP Server"
@@ -3913,11 +4041,6 @@ msgstr ""
 msgid "Load/Save on floppy"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
 #: ../../standalone/draksplash:1 ../../standalone/draksplash:1
 #, c-format
 msgid "This theme does not yet have a bootsplash in %s !"
@@ -3981,6 +4104,81 @@ msgstr ""
 #: ../../help.pm:1
 #, c-format
 msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
 "Graphic Card\n"
 "\n"
 "   The installer will normally automatically detect and configure the\n"
@@ -4022,6 +4220,13 @@ msgstr ""
 msgid "Macedonia"
 msgstr ""
 
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Slovenian"
@@ -4032,11 +4237,6 @@ msgstr ""
 msgid "Libya"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", network printer \\\"%s\\\", port %s"
-msgstr ""
-
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Configuring scripts, installing software, starting servers..."
@@ -4150,31 +4350,6 @@ msgid ""
 "- Save to Tape on device: %s"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \\\"lspcidrake -v | fgrep AUDIO\\\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \\\"grep sound-slot /etc/modules.conf\\\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \\\"/sbin/lsmod\\\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \\\"/sbin/chkconfig --list sound\\\" and \\\"/sbin/chkconfig --list alsa\\\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \\\"aumix -q\\\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \\\"/sbin/fuser -v /dev/dsp\\\" will tell which program uses the sound card.\n"
-""
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "East Timor"
@@ -4273,16 +4448,6 @@ msgstr ""
 msgid "Start sector: "
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \\\"Pre-Windows 2000 Compatible Access\\\" everyone /add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are good."
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Congo (Brazzaville)"
@@ -4298,6 +4463,16 @@ msgstr ""
 msgid "Seychelles"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Bad password on %s"
@@ -4310,13 +4485,6 @@ msgid ""
 "There is one unknown printer directly connected to your system"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \\\"Ok\\\" to install 'ImageMagick' or \\\"Cancel\\\" to quit"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Zambia"
@@ -4337,11 +4505,6 @@ msgstr ""
 msgid "Romanian (qwerty)"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on SMB/Windows server \\\"%s\\\", share \\\"%s\\\""
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Under Devel ... please wait."
@@ -4372,6 +4535,14 @@ msgstr ""
 msgid "Import Fonts"
 msgstr ""
 
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Suppress Temporary Files"
@@ -4455,6 +4626,13 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
+""
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid "Currently, no alternative possibility is available"
 msgstr ""
 
@@ -4494,11 +4672,6 @@ msgstr ""
 msgid "Browse"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "In addition, queues not created with this program or \\\"foomatic-configure\\\" cannot be transferred."
-msgstr ""
-
 #: ../../harddrake/data.pm:1
 #, c-format
 msgid "CDROM"
@@ -4519,19 +4692,6 @@ msgstr ""
 msgid "Do you have an ISA sound card?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
 #: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
@@ -4549,35 +4709,6 @@ msgstr ""
 msgid "Can't make screenshots before partitioning"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \\\"/\\\", \\\"/usr\\\" or \\\"/var\\\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\\\"/home\\\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \\\"%s\\\" when you are ready to format partitions.\n"
-"\n"
-"Click on \\\"%s\\\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \\\"%s\\\" if you wish to select partitions that will be checked for\n"
-"bad blocks on the disk."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Host Name"
@@ -4588,6 +4719,11 @@ msgstr ""
 msgid "/File/Save _As"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "%s is not in the scanner database, configure it manually?"
@@ -4708,13 +4844,6 @@ msgstr ""
 msgid "USA (cable-hrc)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\\\"%s\\\")\n"
-"as the default printer?"
-msgstr ""
-
 #: ../../diskdrake/hd_gtk.pm:1
 #, c-format
 msgid "Journalised FS"
@@ -4804,11 +4933,6 @@ msgstr ""
 msgid "Size"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "You have transferred your former default printer (\\\"%s\\\"), Should it be also the default printer under the new printing system %s?"
-msgstr ""
-
 #: ../../help.pm:1
 #, c-format
 msgid "GRUB"
@@ -4843,6 +4967,36 @@ msgstr ""
 msgid "Delete All NBIs"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
+
 #: ../../security/help.pm:1
 #, c-format
 msgid "if set, send the mail report to this email address else send it to root."
@@ -4853,11 +5007,6 @@ msgstr ""
 msgid "Which configuration of XFree do you want to have?"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\\\"Menu\\\" key"
-msgstr ""
-
 #: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "More"
@@ -4871,11 +5020,6 @@ msgid ""
 "connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \\\"MtoolsFM\\\" (Menu: \\\"Applications\\\" -> \\\"File tools\\\" -> \\\"MTools File Manager\\\") or the command line utilities \\\"mtools\\\" (enter \\\"man mtools\\\" on the command line for more info). You find the card's file system under the drive letter \\\"p:\\\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \\\"MtoolsFM\\\" you can switch between drive letters with the field at the upper-right corners of the file lists."
-msgstr ""
-
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Account Password"
@@ -4938,6 +5082,13 @@ msgstr ""
 msgid "Choose the network or host on which the local printers should be made available:"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
+""
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Japan"
@@ -4968,19 +5119,16 @@ msgstr ""
 msgid "Warning, another internet connection has been detected, maybe using your network"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "Cd-Rom labeled \"%s\""
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \\\"Raw printer\\\" is highlighted."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
 
 #: ../../install_steps_interactive.pm:1
@@ -5011,6 +5159,11 @@ msgstr ""
 msgid "I don't know"
 msgstr ""
 
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ""
+
 #: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
@@ -5023,6 +5176,14 @@ msgid ""
 "Do you want to continue?"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
+msgstr ""
+
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Post Uninstall"
@@ -5092,70 +5253,6 @@ msgstr ""
 msgid "Uruguay"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented with a list of different parameters to change to get\n"
-"an optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is correct, you can choose from\n"
-"this list the monitor you actually have connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \\\"%s\\\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\\\"%s\\\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the list shown below or click on the \\\"Print option list\\\" button.%s%s%s\n"
-"\n"
-""
-msgstr ""
-
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Path selection"
@@ -5191,11 +5288,6 @@ msgstr ""
 msgid "Please check all users that you want to include in your backup."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Scanning/Photo Cards on \\\"%s\\\""
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
@@ -5203,16 +5295,6 @@ msgid ""
 "You can launch printerdrake from the Mandrake Control Center in Hardware section."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \\\"The model is correct\\\" if so and if not, click \\\"Select model manually\\\" so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Bangladesh"
@@ -5223,6 +5305,21 @@ msgstr ""
 msgid "Japan (cable)"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+msgstr ""
+
 #: ../../standalone/drakfont:1 ../../standalone/drakfont:1
 #, c-format
 msgid "Initial tests"
@@ -5238,6 +5335,15 @@ msgstr ""
 msgid "Custom Restore"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+
 #: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Script-based"
@@ -5270,17 +5376,6 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \\\"Print\\\" command of your application (usually in the \\\"File\\\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \\\"Printer\\\" in the \\\"Hardware\\\" section of the Mandrake Control Center."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
 msgstr ""
 
@@ -5617,6 +5712,11 @@ msgid ""
 "Do you really want to configure printing on this machine?"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host \"%s\", port %s"
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "This partition can't be used for loopback"
@@ -5672,11 +5772,6 @@ msgstr ""
 msgid "Click on a device in the left tree in order to display its information here."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Cd-Rom labeled \\\"%s\\\""
-msgstr ""
-
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "XawTV isn't installed!"
@@ -5704,6 +5799,21 @@ msgstr ""
 msgid "This label is already used"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
@@ -5871,14 +5981,14 @@ msgstr ""
 msgid "Choose file"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Left \\\"Windows\\\" key"
+msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
 msgstr ""
 
-#: ../../network/shorewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
+msgid "Printing/Photo Card Access on \"%s\""
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -5898,6 +6008,11 @@ msgstr ""
 msgid "Generic PS2 Wheel Mouse"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr ""
+
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid "Select a device !"
@@ -5940,7 +6055,7 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Removing old printer \\\"%s\\\"..."
+msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists."
 msgstr ""
 
 #: ../../steps.pm:1
@@ -5971,19 +6086,16 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\\\"Transfer\\\"."
+msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
 
 #: ../../help.pm:1
 #, c-format
 msgid ""
-"\\\"%s\\\": check the current country selection. If you are not in this\n"
-"country, click on the \\\"%s\\\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \\\"%s\\\" button to get the complete\n"
-"country list."
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
 
 #: ../../lang.pm:1
@@ -6051,16 +6163,6 @@ msgstr ""
 msgid "You can't use JFS for partitions smaller than 16MB"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"The old \\\"%s\\\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \\\"%s\\\" driver'll only be used on next bootstrap."
-msgstr ""
-
 #: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
@@ -6096,11 +6198,6 @@ msgstr ""
 msgid "These are the machines on which the locally connected scanner(s) should be available:"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "No sound card detected. Try \\\"harddrake\\\" after installation"
-msgstr ""
-
 #: ../../standalone/drakpxe:1
 #, c-format
 msgid "The DHCP end ip"
@@ -6239,11 +6336,24 @@ msgstr ""
 msgid "Armenian (old)"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+
 #: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
 msgid "Find the solutions of your problems via MandrakeSoft's online support platform."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", host \"%s\", port %s"
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Monaco"
@@ -6264,11 +6374,6 @@ msgstr ""
 msgid "Canada (cable)"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \\\"Windows\\\" key"
-msgstr ""
-
 #: ../../help.pm:1 ../../help.pm:1
 #, c-format
 msgid "Upgrade"
@@ -6291,11 +6396,6 @@ msgstr ""
 msgid "Kyrgyzstan"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do you really want to remove the printer \\\"%s\\\"?"
-msgstr ""
-
 #: ../../help.pm:1
 #, c-format
 msgid "With basic documentation"
@@ -6367,20 +6467,6 @@ msgstr ""
 msgid "Please test the mouse"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to install\n"
-"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used with\n"
-"the Mandrake rescue image, making it much easier to recover from severe system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the first\n"
-"drive and press \\\"Ok\\\"."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Other Media"
@@ -6498,11 +6584,6 @@ msgid ""
 ""
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" is set as the default printer now."
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Senegal"
@@ -6513,6 +6594,11 @@ msgstr ""
 msgid "Command line"
 msgstr ""
 
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "Our full range of Linux solutions, as well as special offers on products and other \"goodies\", are available on our e-store:"
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "access to administrative files"
@@ -6656,11 +6742,6 @@ msgstr ""
 msgid "Internet Connection Sharing is now disabled."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuring printer \\\"%s\\\"..."
-msgstr ""
-
 #: ../../security/help.pm:1
 #, c-format
 msgid "if set to yes, verify checksum of the suid/sgid files."
@@ -6728,6 +6809,18 @@ msgstr ""
 msgid "Install"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+
 #: ../../steps.pm:1
 #, c-format
 msgid "Exit install"
@@ -6775,20 +6868,6 @@ msgstr ""
 msgid "Devanagari"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \\\"ps auxwww\\\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \\\"GUEST\\\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \\\"%s\\\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
@@ -6859,11 +6938,6 @@ msgstr ""
 msgid "Backup User files..."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Removing printer \\\"%s\\\"..."
-msgstr ""
-
 #: ../../steps.pm:1
 #, c-format
 msgid "Install system"
@@ -6904,6 +6978,11 @@ msgstr ""
 msgid "load setting"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr ""
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Floppy can be removed now"
@@ -6919,35 +6998,6 @@ msgstr ""
 msgid "Denmark"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \\\"%s\\\" button, a mouse image is displayed on-screen. Scroll\n"
-"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
-"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-"buttons and check that the mouse pointer moves on-screen as you move your\n"
-"mouse."
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Moving partition..."
@@ -6968,9 +7018,42 @@ msgstr ""
 msgid "Installing %s ..."
 msgstr ""
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../help.pm:1
 #, c-format
-msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \\\"Community\\\" webpages."
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
 
 #: ../../diskdrake/interactive.pm:1
@@ -7051,74 +7134,14 @@ msgid ""
 ""
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"As a review, DrakX will present a summary of information it has about your\n"
-"system. Depending on your installed hardware, you may have some or all of\n"
-"the following entries. Each entry is made up of the configuration item to\n"
-"be configured, followed by a quick summary of the current configuration.\n"
-"Click on the corresponding \\\"%s\\\" button to change that.\n"
-"\n"
-" * \\\"%s\\\": check the current keyboard map configuration and change that if\n"
-"necessary.\n"
-"\n"
-" * \\\"%s\\\": check the current country selection. If you are not in this\n"
-"country, click on the \\\"%s\\\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \\\"%s\\\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \\\"%s\\\": By default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \\\"%s\\\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \\\"%s\\\": check the current mouse configuration and click on the button to\n"
-"change it if necessary.\n"
-"\n"
-" * \\\"%s\\\": clicking on the \\\"%s\\\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \\\"%s\\\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \\\"%s\\\": by default, DrakX configures your graphical interface in\n"
-"\\\"800x600\\\" or \\\"1024x768\\\" resolution. If that does not suit you, click on\n"
-"\\\"%s\\\" to reconfigure your graphical interface.\n"
-"\n"
-" * \\\"%s\\\": if a TV card is detected on your system, it is displayed here.\n"
-"If you have a TV card and it is not detected, click on \\\"%s\\\" to try to\n"
-"configure it manually.\n"
-"\n"
-" * \\\"%s\\\": if an ISDN card is detected on your system, it will be displayed\n"
-"here. You can click on \\\"%s\\\" to change the parameters associated with the\n"
-"card.\n"
-"\n"
-" * \\\"%s\\\": If you want to configure your Internet or local network access\n"
-"now.\n"
-"\n"
-" * \\\"%s\\\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \\\"%s\\\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \\\"%s\\\": if you wish to change your bootloader configuration, click that\n"
-"button. This should be reserved to advanced users.\n"
-"\n"
-" * \\\"%s\\\": here you'll be able to fine control which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
+msgid "Type of install"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Type of install"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
 msgstr ""
 
 #: ../../standalone/drakbackup:1
@@ -7134,14 +7157,6 @@ msgstr ""
 msgid "%d comma separated numbers"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\\\"%s\\\" driver (default driver for your card is \\\"%s\\\")"
-msgstr ""
-
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -7318,6 +7333,11 @@ msgstr ""
 msgid "Pakistan"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
+msgstr ""
+
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Permissions"
@@ -7335,11 +7355,6 @@ msgid ""
 ""
 msgstr ""
 
-#: ../../printer/cups.pm:1
-#, c-format
-msgid "On CUPS server \\\"%s\\\""
-msgstr ""
-
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid ""
@@ -7425,14 +7440,6 @@ msgid ""
 "Do you want to have the automatic starting of the printing system turned on again?"
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \\\"Resize\\\")"
-msgstr ""
-
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -7445,6 +7452,25 @@ msgstr ""
 msgid "Add host"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"If you really think that you know which driver is the right one for your card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
+""
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
@@ -7462,6 +7488,11 @@ msgstr ""
 msgid "Use quota for backup files."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr ""
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Internet connection"
@@ -7479,21 +7510,6 @@ msgstr ""
 msgid "Welcome to the Open Source world."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Bosnia and Herzegovina"
@@ -7528,6 +7544,11 @@ msgstr ""
 msgid "Internal ISDN card"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
+msgstr ""
+
 #: ../../network/modem.pm:1
 #, c-format
 msgid "Title"
@@ -7553,19 +7574,6 @@ msgstr ""
 msgid "replay"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \\\"%s\\\" box. If not, simply turn off your computer."
-msgstr ""
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Freq should have the suffix k, M or G (for example, \\\"2.46G\\\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
-msgstr ""
-
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "detected %s"
@@ -7712,9 +7720,9 @@ msgstr ""
 msgid "Connection timeout (in sec)"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Turkish (modern \\\"Q\\\" model)"
+msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
 msgstr ""
 
 #: ../../keyboard.pm:1
@@ -7844,6 +7852,11 @@ msgstr ""
 msgid "primary"
 msgstr ""
 
+#: ../../printer/main.pm:1
+#, c-format
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
+
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -7875,11 +7888,6 @@ msgstr ""
 msgid "Niue"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \\\"Drivers\\\" link. Then choose your model and afterwards \\\"Linux\\\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \\\"lexmarkmaintain\\\" and adjust the head alignment settings with this program."
-msgstr ""
-
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -7892,13 +7900,6 @@ msgstr ""
 msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
 #: ../../pkgs.pm:1
 #, c-format
 msgid "important"
@@ -8007,11 +8008,6 @@ msgstr ""
 msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \\\"benchmark\\\" the cpu."
-msgstr ""
-
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
@@ -8191,11 +8187,6 @@ msgstr ""
 msgid "Other OS (MacOS...)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \\\"%s\\\", port %s"
-msgstr ""
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "To activate the mouse,"
@@ -8211,6 +8202,40 @@ msgstr ""
 msgid "Screenshots will be available after install in %s"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Tanzania"
@@ -8455,23 +8480,6 @@ msgstr ""
 msgid "Italian"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\\\"%s\\\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same timezone. This is useful when the machine\n"
-"also hosts another operating system like Windows.\n"
-"\n"
-"The \\\"%s\\\" option will automatically regulate the clock by connecting to a\n"
-"remote time server on the Internet. For this feature to work, you must have\n"
-"a working Internet connection. It is best to choose a time server located\n"
-"near you. This option actually installs a time server that can used by\n"
-"other machines on your local network as well."
-msgstr ""
-
 #: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
 msgid "Basic"
@@ -8589,11 +8597,6 @@ msgstr ""
 msgid "access to compilation tools"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \\\"Automatically find available printers on remote machines\\\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \\\"Remote printers\\\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Please select data to restore..."
@@ -8611,15 +8614,6 @@ msgstr ""
 msgid "Standard test page"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \\\"%s\\\" sound card is \\\"%s\\\" "
-msgstr ""
-
 #: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Create"
@@ -8655,16 +8649,6 @@ msgstr ""
 msgid "Gujarati"
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Configure only card \\\"%s\\\"%s"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to remove the printer \\\"%s\\\" from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
 #: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
@@ -8753,6 +8737,40 @@ msgstr ""
 msgid "Automatic IP"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+
 #: ../../mouse.pm:1 ../../mouse.pm:1
 #, c-format
 msgid "Kensington Thinking Mouse"
@@ -8980,6 +8998,15 @@ msgstr ""
 msgid "Close"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
+msgstr ""
+
 #: ../../standalone/logdrake:1
 #, c-format
 msgid "Calendar"
@@ -9027,6 +9054,16 @@ msgstr ""
 msgid "Expand Tree"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
+
 #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
 msgid "Expert Mode"
@@ -9042,13 +9079,6 @@ msgstr ""
 msgid "Local Network adress"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"The \\\"%s\\\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \\\"%s <file>\\\". "
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Backup your System files. (/etc directory)"
@@ -9273,6 +9303,13 @@ msgstr ""
 msgid "Send mail report after each backup to:"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
+""
+msgstr ""
+
 #: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
 msgid "Resolution"
@@ -9385,13 +9422,6 @@ msgid ""
 " need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid ""
-"Some devices in the \\\"%s\\\" hardware class were removed:\n"
-""
-msgstr ""
-
 #: ../../network/tools.pm:1
 #, c-format
 msgid "Please fill or check the field below"
@@ -9469,11 +9499,6 @@ msgstr ""
 msgid "Inuktitut"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Turkish (traditional \\\"F\\\" model)"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Morocco"
@@ -9521,14 +9546,6 @@ msgstr ""
 msgid "commands before booting, or 'c' for a command-line."
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \\\"port/tcp\\\" or \\\"port/udp\\\", \n"
-"where port is between 1 and 65535."
-msgstr ""
-
 #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
 msgid "Problems installing package %s"
@@ -9587,6 +9604,48 @@ msgstr ""
 msgid "Tuner type:"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
+msgstr ""
+
 #: ../../standalone/draksec:1
 #, c-format
 msgid "Security Administrator:"
@@ -9609,34 +9668,6 @@ msgid ""
 "Create one first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \\\"%s\\\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if you will\n"
-"host users from Spain on your machine, select English as the default\n"
-"language in the tree view and \\\"%s\\\" in the Advanced section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \\\"%s\\\"\n"
-"box. Selecting support for a language means translations, fonts, spell\n"
-"checkers, etc. for that language will be installed. Additionally, the\n"
-"\\\"%s\\\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
-"however that this is an experimental feature. If you select different\n"
-"languages requiring different encoding the unicode support will be\n"
-"installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \\\"/usr/sbin/localedrake\\\" command as \\\"root\\\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Fonts copy"
@@ -9652,6 +9683,11 @@ msgstr ""
 msgid "Do you want to test the configuration?"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP."
+msgstr ""
+
 #: ../../standalone/draksec:1
 #, c-format
 msgid ""
@@ -9724,21 +9760,11 @@ msgid ""
 "the following error occured: %s"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \\\"Manual configuration\\\"."
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Which sector do you want to move it to?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessable after booting your system and correct the configuration using the Mandrake Control Center, section \\\"Network & Internet\\\"/\\\"Connection\\\", and afterwards set up the printer, also using the Mandrake Control Center, section \\\"Hardware\\\"/\\\"Printer\\\""
-msgstr ""
-
 #: ../../interactive/stdio.pm:1
 #, c-format
 msgid "Do you want to click on this button?"
@@ -9801,6 +9827,11 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
 "You are configuring an OKI laser winprinter. These printers\n"
 "use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
@@ -9835,21 +9866,6 @@ msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it.\n"
-"\n"
-" Click on \\\"Next\\\" when you are ready, and on \\\"Cancel\\\" if you do not want to set up your printer(s) now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
 msgstr ""
 
@@ -9902,6 +9918,13 @@ msgstr ""
 msgid "xfs restart"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "No partition available"
@@ -9937,15 +9960,6 @@ msgstr ""
 msgid "True Type install done"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\\\"%s\\\": clicking on the \\\"%s\\\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to setup a new printer. The interface presented there is\n"
-"similar to the one used during installation."
-msgstr ""
-
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid "Detection in progress"
@@ -9966,11 +9980,6 @@ msgstr ""
 msgid "Please insert the Update Modules floppy in drive %s"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \\\"phonetic\\\" QWERTY"
-msgstr ""
-
 #: ../../standalone/drakboot:1
 #, c-format
 msgid "Bootsplash"
@@ -9990,6 +9999,13 @@ msgstr ""
 msgid "Printer sharing on hosts/networks: "
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
+msgstr ""
+
 #: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
@@ -10047,11 +10063,6 @@ msgid ""
 "Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Interface \\\"%s\\\""
-msgstr ""
-
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
@@ -10222,13 +10233,6 @@ msgid ""
 "during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \\\"%s <file>\\\" or \\\"%s <file>\\\".\n"
-""
-msgstr ""
-
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Automatic reconfiguration"
@@ -10331,36 +10335,6 @@ msgid ""
 ""
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This dialog allows you to fine tune your bootloader:\n"
-"\n"
-" * \\\"%s\\\": there are three choices for your bootloader:\n"
-"\n"
-"    * \\\"%s\\\": if you prefer grub (text menu).\n"
-"\n"
-"    * \\\"%s\\\": if you prefer LILO with its text menu interface.\n"
-"\n"
-"    * \\\"%s\\\": if you prefer LILO with its graphical interface.\n"
-"\n"
-" * \\\"%s\\\": in most cases, you will not change the default (\\\"%s\\\"), but if\n"
-"you prefer, the bootloader can be installed on the second hard drive\n"
-"(\\\"%s\\\"), or even on a floppy disk (\\\"%s\\\");\n"
-"\n"
-" * \\\"%s\\\": after a boot or a reboot of the computer, this is the delay\n"
-"given to the user at the console to select a boot entry other than the\n"
-"default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\\\"%s\\\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you are doing before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \\\"%s\\\" button in this dialog will offer advanced options which\n"
-"are normally reserved for the expert user."
-msgstr ""
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Portuguese"
@@ -10430,6 +10404,13 @@ msgstr ""
 msgid "LVM name?"
 msgstr ""
 
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid ""
+"Some devices in the \"%s\" hardware class were removed:\n"
+""
+msgstr ""
+
 #: ../../modules/interactive.pm:1
 #, c-format
 msgid "Found %s %s interfaces"
@@ -10494,15 +10475,6 @@ msgstr ""
 msgid "Choose the floppy drive you want to use to make the bootdisk"
 msgstr ""
 
-#: ../../install_steps.pm:1
-#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \\\"rpm -qpl Mandrake/RPMS/*.rpm\\\"\n"
-""
-msgstr ""
-
 #: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
 msgid "LILO with text menu"
@@ -10695,6 +10667,17 @@ msgstr ""
 msgid "Winmodem connection"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the Mandrake Control Center."
+msgstr ""
+
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
@@ -10721,6 +10704,23 @@ msgstr ""
 msgid "%s on %s"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Which is your timezone?"
@@ -10869,16 +10869,16 @@ msgstr ""
 msgid "matching"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \\\"Printing command\\\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
-""
+msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
 msgstr ""
 
-#: ../../install2.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Can't access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
 #: ../../install_steps_gtk.pm:1
@@ -10896,13 +10896,6 @@ msgstr ""
 msgid "Use existing partitions"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use the command \\\"%s <file>\\\" or a graphical printing tool: \\\"xpp <file>\\\" or \\\"kprinter <file>\\\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
-""
-msgstr ""
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Canadian (Quebec)"
@@ -10933,6 +10926,17 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "We are now going to configure the %s connection."
@@ -10991,6 +10995,11 @@ msgstr ""
 msgid "A valid URI must be entered!"
 msgstr ""
 
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Re-configure interface and DHCP server"
@@ -11088,6 +11097,71 @@ msgid ""
 "Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
+"\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Comoros"
@@ -11115,6 +11189,13 @@ msgstr ""
 msgid "USA (cable)"
 msgstr ""
 
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgstr ""
+
 #: ../../mouse.pm:1
 #, c-format
 msgid "Generic 3 Button Mouse"
@@ -11182,6 +11263,11 @@ msgstr ""
 msgid "Network & Internet"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr ""
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Net Boot Images"
@@ -11314,81 +11400,6 @@ msgstr ""
 msgid "2 MB"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \\\"%s\\\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \\\"%s\\\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\\\"%s\\\": gives access to additional features:\n"
-"\n"
-" * \\\"%s\\\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \\\"%s\\\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \\\"%s\\\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it doesn't always\n"
-"work.\n"
-"\n"
-" * \\\"%s\\\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \\\"%s\\\": unchecking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \\\"%s\\\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \\\"%s\\\": use this option to cancel your changes.\n"
-"\n"
-" * \\\"%s\\\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \\\"%s\\\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-
 #: ../../standalone.pm:1
 #, c-format
 msgid ""
@@ -11421,6 +11432,11 @@ msgstr ""
 msgid "Generating preview ..."
 msgstr ""
 
+#: ../../network/network.pm:1
+#, c-format
+msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
+msgstr ""
+
 #: ../../mouse.pm:1
 #, c-format
 msgid "serial"
@@ -11431,6 +11447,11 @@ msgstr ""
 msgid "DVD-ROM"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr ""
+
 #: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
 msgid "Get the best items with Mandrake Linux Strategic partners"
@@ -11453,11 +11474,6 @@ msgstr ""
 msgid "Kenya"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "allow \\\"su\\\""
-msgstr ""
-
 #: ../../diskdrake/hd_gtk.pm:1
 #, c-format
 msgid "Use ``Unmount'' first"
@@ -11468,11 +11484,6 @@ msgstr ""
 msgid "Installing mtools packages..."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printer \\\"%s\\\" was successfully removed from Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "You must specify a root partition"
@@ -11562,45 +11573,6 @@ msgstr ""
 msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \\\"%s\\\" on SMB/Windows server \\\"%s\\\""
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \\\"%s\\\" to reboot the system. The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"bootloader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \\\"%s\\\" button shows two more buttons to:\n"
-"\n"
-" * \\\"%s\\\": to create an installation floppy disk that will automatically\n"
-"perform a whole installation without the help of an operator, similar to\n"
-"the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \\\"%s\\\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-"    * \\\"%s\\\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \\\"%s\\\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key and type >>linux\n"
-"defcfg=\\\"floppy\\\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\\\"mformat a:\\\")"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Virgin Islands (British)"
@@ -11623,6 +11595,40 @@ msgid ""
 "please click Wizard or Advanced."
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+
 #: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
 msgid "Remove"
@@ -11719,6 +11725,11 @@ msgid ""
 " in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
+#: ../../network/network.pm:1
+#, c-format
+msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
+msgstr ""
+
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "Choose the connection you want to configure"
@@ -11825,6 +11836,62 @@ msgstr ""
 msgid "Empty"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
+
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "text width"
@@ -11840,6 +11907,11 @@ msgstr ""
 msgid "The default lease (in seconds)"
 msgstr ""
 
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "With basic documentation (recommended!)"
@@ -11890,11 +11962,6 @@ msgstr ""
 msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\\\"Information\\\")"
-msgstr ""
-
 #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 ../../standalone/harddrake2:1
 #, c-format
 msgid "Vendor"
@@ -11935,56 +12002,6 @@ msgstr ""
 msgid "Launch userdrake"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \\\"root\\\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
-"variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \\\"root\\\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \\\"root\\\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Is this an install or an upgrade?"
@@ -11995,9 +12012,9 @@ msgstr ""
 msgid "ISDN card"
 msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Found \\\"%s\\\" interface do you want to use it ?"
+msgid "To share your own knowledge and help build Linux software, join our discussion forums on our \"Community\" webpages."
 msgstr ""
 
 #: ../../network/netconnect.pm:1
@@ -12016,14 +12033,38 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
+
 #: ../../printer/main.pm:1
 #, c-format
 msgid "Printer on remote CUPS server"
 msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "\\\"%s\\\" based winmodem detected, do you want to install needed software ?"
+msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
 #: ../../standalone/drakperm:1
@@ -12175,18 +12216,6 @@ msgstr ""
 msgid "Network configuration (%d adapters)"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \\\"%s\\\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \\\"%s\\\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \\\"%s\\\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
 #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
 msgid "Mandatory package %s is missing"
@@ -12264,11 +12293,6 @@ msgstr ""
 msgid "Lilo screen"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \\\"Manual configuration\\\"."
-msgstr ""
-
 #: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
 msgid "LILO with graphical menu"
@@ -12284,6 +12308,11 @@ msgstr ""
 msgid "You can't unselect this package. It is already installed"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Go on anyway?"
@@ -12314,9 +12343,18 @@ msgstr ""
 msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Printing/Photo Card Access on \\\"%s\\\""
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to install\n"
+"SILO on your system, or another operating system removes SILO, or SILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used with\n"
+"the Mandrake rescue image, making it much easier to recover from severe system\n"
+"failures.\n"
+"\n"
+"If you want to create a bootdisk for your system, insert a floppy in the first\n"
+"drive and press \"Ok\"."
 msgstr ""
 
 #: ../../fsedit.pm:1
@@ -12461,6 +12499,11 @@ msgstr ""
 msgid "The encryption keys do not match"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Right \"Windows\" key"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "CDROM / DVDROM"
@@ -12471,6 +12514,14 @@ msgstr ""
 msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -12601,14 +12652,19 @@ msgstr ""
 msgid "European protocol"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ""
+
 #: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/interactive.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
 msgid "Error"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid " on LPD server \\\"%s\\\", printer \\\"%s\\\""
+msgid "allow \"su\""
 msgstr ""
 
 #: ../../lang.pm:1 ../../standalone/drakxtv:1
@@ -12621,6 +12677,11 @@ msgstr ""
 msgid "please wait during ttmkfdir..."
 msgstr ""
 
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr ""
+
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid "Level"
@@ -12653,11 +12714,21 @@ msgstr ""
 msgid "mount failed: "
 msgstr ""
 
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu."
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "Image"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid "Remote Administration"
@@ -12678,15 +12749,6 @@ msgstr ""
 msgid "CUPS - Common Unix Printing System"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\\\"%s\\\": if a sound card is detected on your system, it is displayed here.\n"
-"If you notice the sound card displayed is not the one that is actually\n"
-"present on your system, you can click on the button and choose another\n"
-"driver."
-msgstr ""
-
 #: ../../standalone/logdrake:1
 #, c-format
 msgid "Webmin Service"
@@ -12712,15 +12774,6 @@ msgstr ""
 msgid "Greece"
 msgstr ""
 
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \\\"New\\\"."
-msgstr ""
-
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "An error occurred"
@@ -12772,27 +12825,11 @@ msgstr ""
 msgid "Give the ram size in MB"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "Real name"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Options\n"
-"\n"
-"   Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\\\"%s\\\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
-
 #: ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1 ../../standalone/drakfont:1
 #, c-format
 msgid "done"
@@ -12902,11 +12939,6 @@ msgstr ""
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \\\"%s\\\", port %s"
-msgstr ""
-
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Up"
@@ -12987,59 +13019,6 @@ msgstr ""
 msgid "Do you have another one?"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various groups, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' group installed.\n"
-"\n"
-" * \\\"%s\\\": if you plan to use your machine as a workstation, select one or\n"
-"more of the applications that are in the workstation group.\n"
-"\n"
-" * \\\"%s\\\": if plan on using your machine for programming, choose the\n"
-"appropriate packages from that group.\n"
-"\n"
-" * \\\"%s\\\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \\\"%s\\\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \\\"%s\\\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \\\"%s\\\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \\\"%s\\\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command line interface. The total size of this installation is about 65\n"
-"megabytes.\n"
-"\n"
-"You can check the \\\"%s\\\" box, which is useful if you are familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you started the installation in \\\"%s\\\" mode, you can unselect all groups\n"
-"to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
 #: ../../printer/main.pm:1
 #, c-format
 msgid ", printing to %s"
@@ -13050,23 +13029,6 @@ msgstr ""
 msgid "Assign host name from DHCP address"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. Now you can scan with \\\"scanimage\\\" (\\\"scanimage -d hp:%s\\\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \\\"xscanimage\\\" or \\\"xsane\\\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \\\"File\\\"/\\\"Acquire\\\" menu. Call also \\\"man scanimage\\\" on the command line to get more information.\n"
-"\n"
-"Do not use \\\"scannerdrake\\\" for this device!"
-msgstr ""
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Change your Cd-Rom!\n"
-"\n"
-"Please insert the Cd-Rom labelled \\\"%s\\\" in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Toggle to normal mode"
@@ -13196,11 +13158,6 @@ msgstr ""
 msgid "Suriname"
 msgstr ""
 
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid "Our full range of Linux solutions, as well as special offers on products and other \\\"goodies\\\", are available on our e-store:"
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "Enable ACPI"
@@ -13284,6 +13241,26 @@ msgstr ""
 msgid "Username required"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "SMB (Windows 9x/NT) Printer Options"
@@ -13441,14 +13418,6 @@ msgstr ""
 msgid "Normal Mode"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"A printer named \\\"%s\\\" already exists under %s. \n"
-"Click \\\"Transfer\\\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -13492,6 +13461,11 @@ msgstr ""
 msgid "Restarting CUPS..."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr ""
+
 #: ../../install_steps.pm:1
 #, c-format
 msgid "Duplicate mount point %s"
@@ -13512,6 +13486,22 @@ msgstr ""
 msgid "Unknown|Generic"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakperm:1 ../../standalone/draksplash:1 ../../standalone/harddrake2:1 ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
 #, c-format
 msgid "Quit"
@@ -13537,43 +13527,22 @@ msgstr ""
 msgid "Other MultiMedia devices"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
+#, c-format
+msgid "No remote machines"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\\\"/\\\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \\\"/home\\\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \\\"Name\\\", \\\"Capacity\\\".\n"
-"\n"
-"\\\"Name\\\" is structured: \\\"hard drive type\\\", \\\"hard drive number\\\",\n"
-"\\\"partition number\\\" (for example, \\\"hda1\\\").\n"
 "\n"
-"\\\"Hard drive type\\\" is \\\"hd\\\" if your hard drive is an IDE hard drive and\n"
-"\\\"sd\\\" if it is a SCSI hard drive.\n"
-"\n"
-"\\\"Hard drive number\\\" is always a letter after \\\"hd\\\" or \\\"sd\\\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \\\"a\\\" means \\\"master hard drive on the primary IDE controller\\\";\n"
-"\n"
-" * \\\"b\\\" means \\\"slave hard drive on the primary IDE controller\\\";\n"
+"Welcome to the Printer Setup Wizard\n"
 "\n"
-" * \\\"c\\\" means \\\"master hard drive on the secondary IDE controller\\\";\n"
+"This wizard will help you to install your printer(s) connected to this computer.\n"
 "\n"
-" * \\\"d\\\" means \\\"slave hard drive on the secondary IDE controller\\\".\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
 "\n"
-"With SCSI hard drives, an \\\"a\\\" means \\\"lowest SCSI ID\\\", a \\\"b\\\" means\n"
-"\\\"second lowest SCSI ID\\\", etc."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
 msgstr ""
 
 #: ../../install_steps_interactive.pm:1
@@ -13611,13 +13580,6 @@ msgstr ""
 msgid "Thailand"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \\\"fileshare\\\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Routers:"
@@ -13658,108 +13620,13 @@ msgstr ""
 msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \\\"i386/boot/boot-3c509.2.4.18-6mdk.nbi\\\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \\\"#type\\\" entry is only used by drakTermServ.  Clients can either be \\\"thin\\\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Change your Cd-Rom!\n"
 "\n"
-""
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
 
 #: ../../keyboard.pm:1
@@ -13859,6 +13726,35 @@ msgstr ""
 msgid "Your choice? (0/1, default `%s') "
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
+"\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
+
 #: ../../keyboard.pm:1 ../../keyboard.pm:1
 #, c-format
 msgid "French"
@@ -13889,15 +13785,6 @@ msgstr ""
 msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig program.  Just type \\\"sndconfig\\\" in a console."
-msgstr ""
-
 #: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
 #, c-format
 msgid "Next"
@@ -13934,6 +13821,18 @@ msgstr ""
 msgid "Puerto Rico"
 msgstr ""
 
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr ""
+
 #: ../../install_any.pm:1
 #, c-format
 msgid ""
@@ -14023,11 +13922,6 @@ msgstr ""
 msgid "Restore from Hard Disk."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Run \\\"sndconfig\\\" after installation to configure your sound card"
-msgstr ""
-
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Add to LVM"
@@ -14105,11 +13999,6 @@ msgstr ""
 msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing on the printer \\\"%s\\\""
-msgstr ""
-
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -14152,11 +14041,6 @@ msgstr ""
 msgid "ethernet card(s) detected"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Error: The \\\"%s\\\" driver for your sound card is unlisted"
-msgstr ""
-
 #: ../../standalone/logdrake:1
 #, c-format
 msgid "Syslog"
@@ -14182,6 +14066,11 @@ msgstr ""
 msgid "Set root password"
 msgstr ""
 
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
@@ -14207,11 +14096,6 @@ msgstr ""
 msgid "/_About..."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing/Scanning on \\\"%s\\\""
-msgstr ""
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Bengali"
@@ -14282,11 +14166,6 @@ msgstr ""
 msgid "Done"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "To get a list of the options available for the current printer click on the \\\"Print option list\\\" button."
-msgstr ""
-
 #: ../../network/drakfirewall.pm:1
 #, c-format
 msgid "Web Server"
@@ -14309,6 +14188,14 @@ msgstr ""
 msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "(already added %s)"
@@ -14319,11 +14206,6 @@ msgstr ""
 msgid ", using command %s"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to configure printer \\\"%s\\\"!"
-msgstr ""
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Alt and Shift keys simultaneously"
@@ -14402,6 +14284,47 @@ msgstr ""
 #: ../../help.pm:1
 #, c-format
 msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
+"\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
+"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
+"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
 "At this point, DrakX will allow you to choose the security level desired\n"
 "for the machine. As a rule of thumb, the security level should be set\n"
 "higher if the machine will contain crucial data, or if it will be a machine\n"
@@ -14426,44 +14349,6 @@ msgstr ""
 msgid "Boot Floppy"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes were discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \\\"%s\\\". Clicking \\\"%s\\\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \\\"%s\\\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages have relationships between each other such\n"
-"that installation of a package requires that some other program is also\n"
-"rerquired to be installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
 #: ../../keyboard.pm:1 ../../keyboard.pm:1
 #, c-format
 msgid "Norwegian"
@@ -14474,11 +14359,6 @@ msgstr ""
 msgid "Searching for new scanners ..."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \\\"number row\\\" QWERTY"
-msgstr ""
-
 #: ../../standalone/logdrake:1
 #, c-format
 msgid "Apache World Wide Web Server"
@@ -14499,30 +14379,6 @@ msgstr ""
 msgid "Configure bootsplash picture"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \\\"%s\\\": For the most part, this completely wipes out the old system. If\n"
-"you wish to change how your hard drives are partitioned, or change the file\n"
-"system, you should use this option. However, depending on your partitioning\n"
-"scheme, you can prevent some of your existing data from being over-written.\n"
-"\n"
-" * \\\"%s\\\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \\\"8.1\\\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \\\"8.1\\\" is not recommended."
-msgstr ""
-
 #: ../../lang.pm:1 ../../lang.pm:1
 #, c-format
 msgid "China"
@@ -14587,20 +14443,9 @@ msgstr ""
 msgid "SCSI controllers"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \\\"%s\\\"\n"
-"if you have a working Internet connection, or \\\"%s\\\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \\\"%s\\\" will display a list of places from which updates can be\n"
-"retrieved. You should choose one nearer to you. A package-selection tree\n"
-"will appear: review the selection, and press \\\"%s\\\" to retrieve and install\n"
-"the selected package(s), or \\\"%s\\\" to abort."
+msgid " on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
 #: ../../standalone/drakedm:1
@@ -14638,32 +14483,22 @@ msgstr ""
 msgid "I can't find needed image file `%s'."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Shell"
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \\\"%s\\\".\n"
-"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
-"this detection fails, uncheck the \\\"%s\\\" box. You may also choose not to\n"
-"configure the network, or to do it later, in which case clicking the \\\"%s\\\"\n"
-"button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
 msgstr ""
 
 #: ../../network/isdn.pm:1
@@ -14860,6 +14695,14 @@ msgid ""
 "Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+
 #: ../../printer/data.pm:1
 #, c-format
 msgid "PDQ"
@@ -14915,11 +14758,37 @@ msgstr ""
 msgid "Panama"
 msgstr ""
 
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+
 #: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Monitor"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
+"\n"
+""
+msgstr ""
+
 #: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
 msgid "65 thousand colors (16 bits)"
@@ -15007,11 +14876,6 @@ msgstr ""
 msgid "/File/_Save"
 msgstr ""
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "Rate should have the suffix k, M or G (for example, \\\"11M\\\" for 11M), or add enough '0' (zeroes)."
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Mali"
@@ -15054,6 +14918,11 @@ msgstr ""
 msgid "Allow Thin Clients"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Russian\" layout)"
+msgstr ""
+
 #: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
 msgid "/_Options"
@@ -15164,6 +15033,16 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are good."
+msgstr ""
+
 #: ../../printer/main.pm:1
 #, c-format
 msgid "%s (Port %s)"
@@ -15182,6 +15061,59 @@ msgid ""
 " Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+
 #: ../../any.pm:1 ../../help.pm:1
 #, c-format
 msgid "Accept user"
@@ -15224,6 +15156,11 @@ msgstr ""
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr ""
 
+#: ../../network/modem.pm:1
+#, c-format
+msgid "\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Looking at packages already installed..."
@@ -15309,6 +15246,11 @@ msgstr ""
 msgid "Austria"
 msgstr ""
 
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+
 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
 msgid "Collapse Tree"
@@ -15329,6 +15271,34 @@ msgstr ""
 msgid "Where do you want to install the bootloader?"
 msgstr ""
 
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+
 #: ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1 ../../standalone/scannerdrake:1
 #, c-format
 msgid "The %s is not supported by this version of Mandrake Linux."
@@ -15568,6 +15538,11 @@ msgstr ""
 msgid "Configure X"
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (traditional \"F\" model)"
+msgstr ""
+
 #: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 ../../standalone/scannerdrake:1
 #, c-format
 msgid "Congratulations!"
@@ -15593,6 +15568,13 @@ msgstr ""
 msgid "Install rpm"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
+""
+msgstr ""
+
 #: ../../install_steps_gtk.pm:1
 #, c-format
 msgid "Time remaining "
@@ -15746,11 +15728,6 @@ msgid ""
 ""
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \\\"%s\\\" on server \\\"%s\\\""
-msgstr ""
-
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Choose the packages you want to install"
@@ -15771,6 +15748,13 @@ msgstr ""
 msgid "Make kernel message quiet by default"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "The DHCP end range"
@@ -15813,6 +15797,11 @@ msgstr ""
 msgid "dismiss"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr ""
+
 #: ../../standalone/drakfloppy:1
 #, c-format
 msgid "omit raid modules"
@@ -15835,6 +15824,11 @@ msgstr ""
 msgid "comma separated numbers"
 msgstr ""
 
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
+msgstr ""
+
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Move selected rule up one level"
@@ -15850,6 +15844,11 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr ""
+
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "I can't find any room for installing"
@@ -15896,19 +15895,6 @@ msgstr ""
 msgid "Liberia"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \\\"%s\\\" connection type in Printerdrake.\n"
-"\n"
-""
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\\\"Latin\\\" layout)"
-msgstr ""
-
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -15936,6 +15922,11 @@ msgstr ""
 msgid "Automatic correction of CUPS configuration"
 msgstr ""
 
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Running \"%s\" ..."
+msgstr ""
+
 #: ../../harddrake/v4l.pm:1
 #, c-format
 msgid "enable radio support"
@@ -16065,6 +16056,15 @@ msgstr ""
 msgid "No image found"
 msgstr ""
 
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
+""
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Detected model: %s"
diff --git a/perl-install/share/po/af.po b/perl-install/share/po/af.po
index 3906813e8..0dd888b07 100644
--- a/perl-install/share/po/af.po
+++ b/perl-install/share/po/af.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2001-08-20 21:28-0000\n"
 "Last-Translator: Schalk W. Cronjй <schalkc@uk.ntaba.com>\n"
 "Language-Team: Afrikaans <mandrake@af.org.za>\n"
@@ -15,2157 +15,1244 @@ msgstr ""
 "Content-Type: text/plain; charset=iso-8859-1\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Kanselleer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Hegpunte vir partisies word nou gesoek"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
+msgid "if set to yes, check additions/removals of suid root files."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "\t\tErase=%s"
 msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
 
 #
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "Aangepaste"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Voeg 'n gebruiker by"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS word gelaai"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Nog"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Wat is u muistoestel?"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Resolusie"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Country"
-msgstr "Heg"
+msgid "network printer port"
+msgstr "Netwerkdrukker (sok)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "All languages"
-msgstr "Kies u taal"
+msgid "Please insert floppy disk:"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
+"Wil u voortgaan?"
 
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Kies asb. 'n taal om te gebruik."
-
-#
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "Kies die vensterbestuurder om te loop:"
+msgid "Which username"
+msgstr "Gebruikerskode"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Kies die verstek gebruiker:"
+msgid "Which type of entry do you want to add?"
+msgstr "Watter tipe inskrywing wil u byvoeg?"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Wil u aboot gebruik?"
+msgid "Restore partition table"
+msgstr "Reddingspartisietabel"
 
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
 #, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
-"Verlang u hierdie funksionaliteit?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Outointeken"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Ikoon"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "Dop"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Wagwoord (weer)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Wagwoord"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Gebruikerskode"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS-bediener IP:"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Real name"
-msgstr "Regte naam"
+msgid "Post-install configuration"
+msgstr "Postinstallasiekonfigurasie"
 
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Aanvaar gebruiker"
+msgid "Use ``%s'' instead"
+msgstr "Gebruik ``%s'' instede."
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Done"
-msgstr "Klaar"
+msgid "Type"
+msgstr "Tipe"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
-"Tik 'n gebruiker in\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Voeg gebruiker by"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Hierdie genruikerskode bestaan alreeds"
+msgid "Sri Lanka"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Hierdie genruikerskode bestaan alreeds"
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "Gee asb. 'n gebruikerskode"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Die wagwoorde is te eenvoudig"
+msgid "Central African Republic"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Probeer asb. weer"
+msgid "Gateway device"
+msgstr "Netwerkportaaltoestel"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
+msgid "Net Method:"
+msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s alreeds bygevoeg)"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Ethernetcard"
+msgstr "Ethernetkaart"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "access to compilation tools"
-msgstr ""
+msgid "Parameters"
+msgstr "Parameters"
 
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect"
+msgstr "Gebruik outobespeuring"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "access to administrative files"
-msgstr ""
+msgid "Interface:"
+msgstr "Koppelvlak:"
 
-#: ../../any.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "allow \"su\""
-msgstr ""
+msgid "Select installation class"
+msgstr "Kies installasieklas"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "access to rpm tools"
+msgid "on CDROM"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
 msgstr ""
+"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
+"Probeer om u stelsel te herkonfigureer."
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
-"Hier is die huidige inskrywings\n"
-"U kan byvoeg or verwyder soos nodig."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "Ander bedryfstelsel (windows...)"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Ander bedryfstelsel (MacOS...)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belarus"
+msgstr "Belarussies"
 
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Ander bedryfstelsel (SunOS...)"
+msgid "Error writing to file %s"
+msgstr "Fout in die skryf van %s"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"apmd word gebruik om battery status te monitor en dit dan te log via "
+"syslog.\n"
+"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
+"swak is."
 
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Watter tipe inskrywing wil u byvoeg?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use tape to backup"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../any.pm:1
+#
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "This label is already used"
-msgstr "Hierdie etiket is alreeds in gebruik"
+msgid "The following packages are going to be installed"
+msgstr "Die volgende pakkette gaan installeer word"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "U moet oor 'n ruilpartisie beskik"
+msgid "CUPS configuration"
+msgstr "Konfigurasie"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You must specify a kernel image"
+msgid "Hong Kong"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "Leл etiket word nie toegelaat nie"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Verstek"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "Geen video"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-grootte"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Aanlas"
-
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Label"
-msgstr "Etiket"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Unsafe"
-msgstr "Onveilig"
+msgid "Moving"
+msgstr "Verskuiwing"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Table"
-msgstr "Tabel"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Root"
-msgstr "Basis"
+msgid "("
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Lees-skryf"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Welkom by die Netwerkkonfigurasie-assistent\n"
+"\n"
+"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
+"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Video mode"
-msgstr "Videomodus"
+msgid "Lebanon"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Image"
-msgstr "Beeld"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Verstek bedryfstelsel?"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Sektor"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Laat OF-herlaai toe?"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s bespeur"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Laat CD-herlaai toe?"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Selekteer lOer"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Tydsbeperking vir stelselkernlaai"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Armenies (Foneties)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Open Firmware Delay"
+msgid "The DHCP start ip"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Herlaaitoestel"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Beginboodskap"
-
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Bootloader to use"
-msgstr "Herlaaistelsel om te gebruik"
+msgid "256 kB"
+msgstr "256 kB"
 
 #: ../../any.pm:1
 #, c-format
 msgid "Bootloader main options"
 msgstr "Herlaaistelsel hoofopsies"
 
-#: ../../any.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "Gee die geheuegrootte in MB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Gebruik multiprofiele"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Maak /tmp skoon met elke herlaai"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Maar 'n herlaaiskyf"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "beperk"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Beperk instruksielynopsies"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Laat CD-herlaai toe?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Wagperiode voro verstekstelsel gelaai word"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "kompak"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "Kompak"
+msgid "Tape"
+msgstr "Tipe"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Herlaaiprogram installasie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Konneksie word begin..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Eerste sektor van skyf (MBR)"
+msgid "Malaysia"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Swiss (French layout)"
+msgstr "Switsers (Franse uitleg)"
 
-#: ../../any.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub installasie"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO installasie"
+msgid "Webcam"
+msgstr ""
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Skip"
-msgstr "Mis hierdie stap"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Stoor op floppie"
+msgid "size of the (second level) cpu cache"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Eerste sektor van herlaaipartisie"
+msgid "Soundcard"
+msgstr "Klankkaart"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "Herlaaiskyf word geskryf"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Sit 'n skyf in aandrywer %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Tweede sagteskyfaandrywer"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Eerste sagteskyfaandrywer"
-
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
+msgid "Level %s\n"
+msgstr "Vlak %s\n"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+msgid "Luxembourg"
 msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
-"LILO\n"
-"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
+"                      DrakBackup Daemon Report\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
 msgstr ""
-"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
-"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
-"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
-"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
-"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
-"ernstige stelselfalings te herstel.\n"
-"\n"
-"Indien u 'n herlaaiskyf wil maak,\n"
-"plaas 'n skyf in die aandrywer en druk \"OK\"."
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Waar wil u die herlaaistelsel installeer"
+msgid "Iran"
+msgstr "Iranies"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "nie genoeg spasie in /boot nie"
+msgid "Bus"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
+msgid "Iraq"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
+msgid "Configuring..."
+msgstr "Konfigurasie in aabou..."
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
-"word."
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
 
-#: ../../bootloader.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Password (again)"
+msgstr "Wagwoord (weer)"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Search installed fonts"
+msgstr ""
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO met tekskieskaart"
+msgid "Venezuela"
+msgstr ""
 
-#: ../../bootloader.pm:1
+#
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO met grafiese kieskaart"
+msgid "IP address"
+msgstr "IP adres"
 
-#: ../../bootloader.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Choose the sizes"
+msgstr "Kies die groottes"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"List of data corrupted:\n"
 "\n"
 msgstr ""
-"Welkom by %s die bedryfstelselkeuseprogram!\n"
-"\n"
-"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
-"%d sekonde vir die verstekopsie.\n"
-"\n"
 
-#: ../../common.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "consolehelper missing"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
 msgstr ""
 
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "kdesu is weg"
+msgid "Choose another partition"
+msgstr "Kies 'n ander partisie"
 
-#: ../../common.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Current user"
+msgstr "Aanvaar gebruiker"
 
-#: ../../common.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Ek kan nie meer partisies byvoeg nie"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d sekondes"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 minuut"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d minute"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
+msgid "Username"
+msgstr "Gebruikerskode"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "United States"
+msgid "Left \"Windows\" key"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "seriaal"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Italy"
-msgstr "Italiaans"
+msgid "dhcpd Server Configuration"
+msgstr "Sluit konfigurasie af"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Netherlands"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Sien"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norweegs"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Grieks"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Germany"
-msgstr "Duitsland"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Czech Republic"
+msgid "Guyana"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belgies"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "France"
-msgstr "Frankryk"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Costa Rica"
+msgid " on Novell server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Four om %s in skryfmode te open: %s"
-
-#: ../../fsedit.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "U benodig 'n ware lкerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
+msgid "Remove a module"
+msgstr "Verwyder module"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Hierdie lкergids moet altyd in die wortellкerstelsel bly"
+msgid "Password"
+msgstr "Wagwoord"
 
-#: ../../fsedit.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
 msgstr ""
-"U het 'n sagteware RAID-partisie as wortel (/).\n"
-"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
-"Onthou om 'n /boot by te voeg."
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Sluit konfigurasie af"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mount points should contain only alphanumerical characters"
+msgid "Scanning on your HP multi-function device"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Hegpunte moet met 'n / begin"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
-
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to loose all the partitions?\n"
-msgstr ""
-"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
-"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
-"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
-"(fout is %s)\n"
-"\n"
-"Will u al die partisies verwyder?\n"
+msgid "Root"
+msgstr "Basis"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Error"
-msgstr "Fout"
+msgid "Choose an existing RAID to add to"
+msgstr "Kies 'n bestaande RAID om by toe te voeg"
 
-#: ../../fsedit.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "server"
-msgstr "bediener"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Turks (moderne \"Q\" modem)"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "with /usr"
+msgid "Lilo message not found"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "eenvoudig"
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "fout met onthegting van %s: %s"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "if needed"
+msgstr "indien nodig"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Partisie %s word formateer"
+msgid "Restore Failed..."
+msgstr "Herstel vanaf lкer"
 
-#: ../../fs.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Checking %s"
-msgstr "LPD word verwyder..."
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Partisie %s word formateer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "Lкer %s word geskep en formatteer"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Ek weet nie om %s as tipe %s te formateer nie"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering ban %s het gefaal"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
+msgid "/Autodetect _jazz drives"
+msgstr "Gebruik outobespeuring"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
+"Description:\n"
 "\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
 "\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
 "\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
 "\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
 "\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
 "\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
 "\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
+"Introduction\n"
 "\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
 "\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
 "\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
+"1. License Agreement\n"
 "\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
 "\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
 "\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
+"2. Limited Warranty\n"
 "\n"
-"For Linux, there are a few possible options:\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
 "\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
 "\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
 "\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
 "\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
+"3. The GPL License and Related Licenses\n"
 "\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
 "\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
 "\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
+"4. Intellectual Property Rights\n"
 "\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
 "\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
 "\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
+"5. Governing Laws \n"
 "\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Lyndrukkerdiensprogram"
+
+#: ../../network/isdn.pm:1
+#, c-format
 msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
 "\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
 "\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
 msgstr ""
-"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
-"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
-"dit outomaties installeer word.\n"
 "\n"
-"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
-"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
-"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
-"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
-"\n"
-"\n"
-"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
-"spesifiekeopsies.\n"
-"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
-"gewoonlik die beste.\n"
+"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
+"wees.\n"
 "\n"
-"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
-"Windows-bedryfstelsel te bekom.\n"
-"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
+"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "Druk toetsbladsy(e)"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Gurmukhi"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Force No APIC"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Sleutelbord"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP instaanbediener"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
+"Change\n"
+"Restore Path"
+msgstr "Herstel vanaf lкer"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Show only for the selected day"
 msgstr ""
-"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
-"enige ander\n"
-"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
-"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
-"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
-"\n"
-"\n"
-"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
-"nodige\n"
-"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
-"betrokke bedryfstelsels te laai."
 
-#: ../../help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This dialog allows to finely tune your bootloader:\n"
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
 "\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
 "\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
 "\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
 "\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
 "\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
 "\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
 "\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
 "\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../help.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+msgid "Logs"
 msgstr ""
-"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
-"ttyS0 onder GNU/Linux is."
 
-#: ../../help.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
+msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "What kind of card do you have?"
+msgstr "Oor watter tipe kaart beskik u?"
 
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "Security"
+msgstr "Sekuriteit"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "<control>Q"
+msgstr "<control>Q"
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Onbekende model"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "This server is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "Network Configuration"
+msgstr "Netwerkkonfigurasie"
 
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
 msgstr ""
+"Protokol vir die res vd wкreld \n"
+" geen D-Kanaal nie (bruikhuurlyne)"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr "Opsie %s moet 'n nommer wees"
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "Geen video"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
+"Arguments: (arg)\n"
 "\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+" Activate/Disable daily security check."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"Arguments: (arg)\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
+msgid "You have not configured X. Are you sure you really want this?"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "What type of partitioning?"
+msgstr "Watter tipe van partisionering?"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Koppelvlak"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
+"Options Description:\n"
 "\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
 "\n"
+" - Backup User Files: \n"
 "\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
 "\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+" - Backup Other Files: \n"
 "\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
 "\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-"Options\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Formateer partisies"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "These are the machines from which the scanners should be used:"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
-"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
-"wat die rol van die diens verduidelik.\n"
-"\n"
-"Wees versigtig met hierdie stap. Indien u beplan om diй rekenaar as 'n\n"
-"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
+msgid "Messages"
+msgstr "Beginboodskap"
 
-#: ../../help.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "LDAP-bediener"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Muis"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Formatering"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+msgid "Rwanda"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Do you have any %s interfaces?"
+msgstr "Het u enige %s koppelvlakke?"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Switzerland"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+msgid "Brunei Darussalam"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
+msgid "Remote lpd Printer Options"
+msgstr "Eksterne lpd drukkeropsies"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
 "preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
 "system administrator, the users you add at this point will not be\n"
 "authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
 "The first field asks you for a real name. Of course, this is not mandatory\n"
 "-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
 "that can automatically log into the system when the computer boots up. If\n"
 "you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
 "GNU/Linux is 'n multigebruikerstelsel en dit beteken dat elke gebruiker sy "
 "eie\n"
@@ -2208,4024 +1295,4516 @@ msgstr ""
 "gebruiker wil verander.\n"
 "Dit is bash by verstek."
 
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Internet Access..."
+msgstr "Konfigureer internettoegang..."
+
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
+msgid "Norway"
+msgstr "Norweegs"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Danish"
+msgstr "Deens"
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
 msgstr ""
-"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
-"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
-"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
-"installasie stop sit. Om met die installasie voort te gaan kliek op die "
-"Aanvaar\n"
-"knoppie."
 
-#: ../../install2.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "You must also format %s"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
 msgstr ""
+"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
+"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
+"(1.2.3.4) gegee word."
 
-#: ../../install2.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Processors"
 msgstr ""
-"'n Fout het voorgekom - geen geldige toestelle om die nuwe lкerstelsels op "
-"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "Hongaars"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Fout met die les van lкer %s"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
 msgstr ""
-"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
-"\"linux defcfg=floppy\""
 
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Hierdie floppie is nie in FAT-formaat nie"
+msgid "partition %s is now known as %s"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "Korrupte rugsteunlкer"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+msgid "SMB server IP"
+msgstr "SMB-bediener IP:"
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
+msgid "Congo (Kinshasa)"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Partisietabel van skyf %s gaan opdateer word!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "Installeer pakket %s"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
 msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie LILO (of Grub) op u stelsel wil installeer nie, 'n ander bedryfstelsel "
+"LILO\n"
+"verwyder of LILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel. Wil u 'n herlaaiskyf maak?\n"
+"%s"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No"
-msgstr "Nee"
+msgid ", USB printer \\#%s"
+msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Ja"
+msgid "Latvian"
+msgstr "Latvies"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "monthly"
 msgstr ""
 
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "Modulenaam"
 
-#: ../../install_gtk.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO installasie"
+msgid "Start at boot"
+msgstr "Gelaai tydens herlaaityd"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bringing down the network"
-msgstr "Netwerk op pad af"
+msgid "Use Incremental Backups"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Netwerk op pad op"
+msgid "First sector of drive (MBR)"
+msgstr "Eerste sektor van skyf (MBR)"
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Partisionering het misluk: %s"
+msgid "Joystick"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
+msgid "El Salvador"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Ek kon geen plek vir installasie vind nie."
+msgid "Use Unicode by default"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr ""
-"U het nou partisie %s partisioneer.\n"
-"Wanneer u klaar is, stoor u veranderinge met 'w'."
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use fdisk"
-msgstr "Gebruik fdisk"
+msgid "Trying to rescue partition table"
+msgstr "Partisietabel Reddingspoging"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "Gespesialiseerde skyfpartisionering"
+msgid "Option %s must be an integer number!"
+msgstr "Opsie %s moet 'n heeltal wees!"
 
-#: ../../install_interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Kon nie die intydse opgradering begin nie !!!\n"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Wis hele skyf"
+msgid "Name: "
+msgstr "Naam: "
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Remove Windows(TM)"
-msgstr "Verwyder Windows(TM)"
+msgid "16 million colors (24 bits)"
+msgstr "16-miljoen kleure (24 bis)"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid "Allow all users"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
 msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
 
 #: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
+msgid "Resizing"
+msgstr "Grootteverandering"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabelkonneksie"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Gebruikerskode"
+
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
 msgstr ""
+"Ek kan nie u partisietabel lees nie, dit is te korrup.\n"
+"Ek sal die nodige partisies skoonmaak, maar alle data sal vernietig word.\n"
+"Die ander opsie is om DrakX te belet om die partisietabel te verander.\n"
+"(fout is %s)\n"
+"\n"
+"Will u al die partisies verwyder?\n"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT-grootteverandering het gefaal: %s"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Drukkerbedienernaam"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Naam: "
+
+#: ../../raid.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Windowslкerstelselgrense word bereken"
+msgid "mkraid failed"
+msgstr "mkraid het gefaal"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Resizing"
-msgstr "Grootteverandering"
+msgid "Button 3 Emulation"
+msgstr "Knop-3 emulasie"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "Stoor in lкer"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "partisie %s"
+msgid "Israeli (Phonetic)"
+msgstr "Israelies (Foneties)"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Watter grootte wil u vir Windows behou?"
+msgid "access to rpm tools"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "edit"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+msgid "You must choose/enter a printer/device!"
+msgstr "Tik  drukkertoestel URI in"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Permission problem accessing CD."
 msgstr ""
-"WAARSKUWING\n"
-"\n"
-"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
-"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
-"installasie\n"
-"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
-"na\n"
-"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
-"OK."
 
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
+msgid "Phone number"
+msgstr "Telefoonnommer"
 
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Printer name, description, location"
+msgstr "Drukkernaam,. beskrywing, ligging"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
 msgstr ""
-"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
-"Fout: %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Watter partisie se grootte wil u verander?"
+msgid "Use Xinerama extension"
+msgstr "Gebruik Xinerama-ekstensies"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
+msgid "Loopback"
+msgstr "Teruglus"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"Kon nie mkbootdisk ordentelik afsluit nie:\n"
+" %s \n"
+" %s"
+
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgid "West Europe"
+msgstr "Europa"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
-"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
-"spasie nie) te gebruik nie"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Hardeskyfdeteksie."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ruilpartisiegrootte in MB: "
+msgid "Copying %s"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Kies 'n monitor"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Basispartisiegrootte in MB:"
+msgid "Dominican Republic"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Kies die groottes"
+msgid "Swaziland"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Watter partisie wil u vir Linux4Win gebruik?"
+msgid "Set-UID"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Gebruik vir die Windows-partisie vir teruglus"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "Daar is geen bestaande partisies om te gebruik nie"
+msgid " on parallel port \\#%s"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Gebruik bestaande partisies"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr ""
+"Gebruik die %c en %c sleutels om die inskrywing te kies wat uitgelig moet "
+"word."
 
-#: ../../install_interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Generic 2 Button Mouse"
+msgstr "Generiese 2-knop muis"
 
-#: ../../install_interactive.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid "Use free space"
-msgstr "Gebruik beskikbare spasie"
+msgid "Remove the logical volumes first\n"
+msgstr "Verwyder eers die logiese volumes\n"
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Die uitgeligte inskrywing sal outomaties in %ds gelaai word."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
-"U het nie 'n ruilpartisie nie\n"
-"\n"
-"Wil u steeds voortgaan?"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Internettoegang"
+
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"U moet 'n wortelpartisie definieer.\n"
-"Skep 'n partisie of kliek op 'n bestaande een.\n"
-"Kies dan Hegpunt en stel dit dan '/'."
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
-"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
-" U kan inligting hieroorvind by %s"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Bedieneers word aktiveer..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Toetsbladsy(e) word gedruk..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Daar is alreeds 'n partisie met hegpunt %s\n"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
 "\n"
-"%s\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
 "\n"
+"Depending on your hard drive configuration, several options are available:\n"
 "\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Geluk, installasie is afgehandel.\n"
-"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
 "\n"
-"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
-"bekyk die errata beskikbaar op\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
+"   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-"%s\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
-"hoofstuk in die Offisiлle Liux-Mandrake Gebruikersgids."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "Ukranies"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Magtiging"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "External ISDN modem"
+msgstr "Eksterne ISDN-kaart"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result by mail."
 msgstr ""
 
-#: ../../install_messages.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "Your choice? (default %s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../install_messages.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Resolusie"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
 "\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"4. Intellectual Property Rights\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"5. Governing Laws \n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "Gaan stap '%s' binne\n"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Drukstatus:\n"
+"%s\n"
+"\n"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Help"
+msgid "daily"
 msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "not configured"
-msgstr "herkonfigureer"
+msgid "and one unknown printer"
+msgstr "Voeg drukker by"
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "Konfigureer"
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Yslandies"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "Gaan steeds voort?"
+msgid "kernel version"
+msgstr "bedryfstelselkernweergawe"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "         Restore Configuration       "
+msgstr "Netwerkkonfigurasie"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "Daar was 'n fout met pakkette:"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Is dit korrek?"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Verander u CDROM!\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
 "\n"
-"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
-"nie\n"
-"hieroor beskik nie, druk Kanselleer om installasies vanaf diй CDROM te vermy."
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
+msgstr ""
 
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Weier"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "Konfigurasie"
 
-#
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Accept"
-msgstr "Aanvaar "
+msgid "Autoprobe"
+msgstr "Aftas"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Installeer pakket %s"
+msgid "Backup system files..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d pakkette"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Kan nie uitsaau sonder 'n NIS-domein nie"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No details"
-msgstr "Detail"
+msgid "Removing printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Details"
-msgstr "Detail"
+msgid "drakfloppy"
+msgstr "drakfloppy"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Wag asb. installasie word voorberei"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Time remaining "
-msgstr "Tyd oor "
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Estimating"
-msgstr "Skatting"
+msgid "Peru"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Muistoestel: %s\n"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Installing"
-msgstr "Besig met installasie"
+msgid "Remove Windows(TM)"
+msgstr "Verwyder Windows(TM)"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Minimal install"
-msgstr "Minimale installasie"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Pakketseleksie word opgedateer"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Laai/Stoor op floppie"
+msgid "Madagascar"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Vorige"
+msgid "Urpmi"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Install"
-msgstr "Installasie"
+msgid "Cron not available yet as non-root"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Show automatically selected packages"
-msgstr "Wys outogeselekteerde pakkette."
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "System"
+msgstr "Stelselmode"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Wil u aboot gebruik?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "Arabic"
 msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geпnstalleer"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "Opsies"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Wagwoord"
 
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "%d minutes"
+msgstr "%d minute"
 
-#
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Die volgende pakkette gaan installeer word"
+msgid "Graphics card: %s"
+msgstr "Videokaart: %s"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "WebDAV transfer failed!"
 msgstr ""
-"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
-"beskikbaar is nie"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "Belangrikheid: %s\n"
+msgid "XFree configuration"
+msgstr "XFree-konfigurasie"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Groote: %d KB\n"
+msgid "Choose action"
+msgstr "Kies aksie"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Weergawe: %s\n"
+msgid "French Polynesia"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Naam: %s\n"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "Foutiewe pakket"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Other"
-msgstr "Ander"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Totale grootte: %d / %d MB"
+msgid "Installing driver for %s card %s"
+msgstr "Drywer vir %s kaart %s in installasieproses"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Volgende ->"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Individual package selection"
-msgstr "Individuele pakketseleksie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Datbasis"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Kies pakketgroepe"
+msgid "Ukrainian"
+msgstr "Ukranies"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
 msgstr ""
-"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
-"die installering\n"
-"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
-"Daarvoor moet u\n"
-"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
-"instruksielyn intik."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Stoor pakketseleksie"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Automated"
-msgstr "Outomaties"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "geen netwerkkaart gevind nie"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Replay"
-msgstr "Herspeel"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Verwyder Windows(TM)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Skep outoinstallasieskyf"
+msgid "Firewire controllers"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Reboot"
-msgstr "Basis"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
 msgid ""
-"Some steps are not completed.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
 "\n"
-"Do you really want to quit now?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
-"Bepaalde stappe is nie afgehandel nie.\n"
+"LILO (Die LInux LOader) en Grub is herlaaistelsels. Beide kan GNU/Linux of "
+"enige ander\n"
+"bedryfstelsel wat op u rekenar teenwoordig is, laai. Gewoonlik word hierdie\n"
+"beryfstelsels reg bespeur en bygevoeg. Indien nie, kan u 'n inskrywing maak\n"
+"op hierdie skerm. Maak seker u kies die korrekte paramters.\n"
 "\n"
-"Wil u werklik nou aborteer?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Creating auto install floppy..."
-msgstr "Outoinstallasieskyf word geskep."
+"\n"
+"U mag dalk toegang tot ander bedryfstelsels beperk, in welke geval u die "
+"nodige\n"
+"inskrywings kan uitvee. Maar dan het u die nodige herlaaiskywe nodig om die\n"
+"betrokke bedryfstelsels te laai."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Sit 'n leл floppie in aandrywer %s"
+msgid "System mode"
+msgstr "Stelselmode"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
+"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
+"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
+"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
+"die drukkernaam; toepaslike gebruikerskode en wagwoord."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
+#
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmasker"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Herlaaistelselinstallasie"
+msgid "Append"
+msgstr "Aanlas"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
-"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
-"word die eerste partisie vernietig?"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Do you want to use aboot?"
-msgstr "Wil u aboot gebruik?"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Herlaaistelsel word voorberei"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Domain Admin Password"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Domeinnaam"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS-domein"
-
-#: ../../install_steps_interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "LDAP-magtiging"
+msgid "Network printer \"%s\", port %s"
+msgstr "Netwerkdrukker (sok)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
+"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "NIS Server"
-msgstr "NIS-bediener"
+msgid "OK to restore the other files."
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "NIS-domein"
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Authentication NIS"
-msgstr "NIS-magtiging"
+msgid "Printer Device URI"
+msgstr "Drukkertoestel URI"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "LDAP Server"
-msgstr "LDAP-bediener"
+msgid "Terminal-based"
+msgstr "Terminaaltipe"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Basis-dn"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP-magtiging"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Hierdie genruikerskode bestaan alreeds"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "LDAP"
-msgstr "KDAP"
+msgid "Other OS (windows...)"
+msgstr "Ander bedryfstelsel (windows...)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Local files"
-msgstr "Plaaslike lкers"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
-#, c-format
-msgid "Authentication"
-msgstr "Magtiging"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Drukkerdata word gelees..."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
+msgid "Generate auto install floppy"
+msgstr "Skep outoinstallasieskyf"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No password"
-msgstr "Geen wagwoord"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Kies 'root' se wagwoord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS-domein"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "No open source driver"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, c-format
-msgid "Services: %d activated for %d registered"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
 msgstr ""
+"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
+"Sekuriteitseienskappe is maksimaal."
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Services"
-msgstr "Dienste"
-
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "Stelselmode"
+msgid "Nicaragua"
+msgstr ""
 
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Poort"
+msgid "New Caledonia"
+msgstr "Masedonies"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Herlaaistelsel om te gebruik"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Europese protokol (EDSS1)"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Basis"
+#: ../../any.pm:1
+#, c-format
+msgid "Video mode"
+msgstr "Videomodus"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "disabled"
-msgstr "deaktiveer"
+msgid "Please enter your email address below "
+msgstr "Probeer asb. weer"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "activated"
-msgstr "Aktiveer nou dadelik"
+msgid "Oman"
+msgstr "NIS-domein"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Firewall"
-msgstr "Vuurmuur/Netwerkroteerder"
+msgid "Network Monitoring"
+msgstr "Netwerkkonfigurasie"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Security"
-msgstr "Sekuriteit"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "New size in MB: "
+msgstr "Nuwe grootte in MB: "
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "Netwerkkoppelvlak"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "Partisietabeltipe: %s\n"
 
 #: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Netwerkkoppelvlak"
+msgid "Authentication Windows Domain"
+msgstr "LDAP-magtiging"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X met herlaai"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard"
+msgstr "VSA sleutelbord"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "Knoppie-emulasie"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV-kaaer"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Beskik u oor nog?"
+msgid "Sending Speed:"
+msgstr "Stoor in lкer"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sound card"
-msgstr "Klankkaart"
+msgid "Halt bug"
+msgstr ""
 
-#
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Verwyder CUPS-bediener"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Konfigurasie"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Geen drukker"
+msgid "Tokelau"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer"
-msgstr "Drukker"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniaans"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Muis"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Wag asb."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Timezone"
-msgstr "Tydsone"
+msgid "Connection speed"
+msgstr "Konneksiespoed"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Keyboard"
-msgstr "Sleutelbord"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Summary"
-msgstr "Opsomming"
+msgid "Namibia"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NTP Server"
-msgstr "NTP-bediener"
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Datbasis"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Outotydsinkronisasie met NTP"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Hardewareklok gestel vir GMT"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Wat is u tydsone?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
+"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Kon nie vurk nie: %s"
+msgid "Please wait, setting security options..."
+msgstr "Wag asb. installasie word voorberei"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Spieлl word gekontak vir die lys van pakkette"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Kies 'n spieлl waar die pakkette verkry kan word"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Spieлl word gekontak vir die lys van pakkette"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Laai X-Windowstelsel met herlaai"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "hourly"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
+msgid "          Successfuly Restored on %s       "
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Postinstallasiekonfigurasie"
+msgid "Antigua and Barbuda"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
 msgstr ""
-"Installeer nou pakket %s\n"
-"%d%%"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "Berei installasie voor"
+msgid "Spanish"
+msgstr "Spaans"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CDROM getiteld \"%s\""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Toestand"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
 msgstr ""
-"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
-"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
-"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "Alles"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Konfigureer drukker"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normale modemkonneksie"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "With X"
-msgstr "Wag"
+msgid "File Selection"
+msgstr "Pakketkeuse"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Type of install"
-msgstr "Kies pakket om te installeer"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr "Geselekteerde grootte is groter as beskikbare spasie."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Loading from floppy"
-msgstr "Oplaai vanaf floppie"
+msgid "Run config tool"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Package selection"
-msgstr "Pakketkeuse"
+msgid "Bootloader installation"
+msgstr "Herlaaiprogram installasie"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "Stoor op floppie"
+msgid "Root partition size in MB: "
+msgstr "Basispartisiegrootte in MB:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Laai vanaf floppie"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Hierdie is 'n verpligte pakket. Dit kan nie uitgehaal word nie."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Etherboot ISO image is %s"
 msgstr ""
-"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
-"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
+#: ../../services.pm:1
+#, fuzzy, c-format
 msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
 msgstr ""
-"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
+"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
+"rekenaarname na IP-adresse toe om te skakel."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Looking for available packages..."
-msgstr "Soek vir beskikbare pakkette"
+msgid "Disconnect..."
+msgstr "Diskonnekteer..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Soek vir pakkette om op te gradeer."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geпnstalleer"
+msgid "Saint Lucia"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Soek vir beskikbare pakkette"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
+msgid "Report"
+msgstr "Poort"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+msgid "Palau"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "Toets vir foutiewe areas?"
+msgid "level"
+msgstr "vlak"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Kies die partisies om te formatteer"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
+msgid "Package Group Selection"
+msgstr "Kies pakketgroepe"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Restore Via Network Protocol: %s"
 msgstr ""
-"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
-"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
-"herlaai."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Choose the mount points"
-msgstr "Kies die hegpunte"
+msgid "You can configure each parameter of the module here."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Hegpunte vir partisies word nou gesoek"
+msgid "Choose the resolution and the color depth"
+msgstr "Kies die resolusie en kleurdiepte"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "No partition available"
-msgstr "geen beskikbare partisies"
+msgid "Emulate third button?"
+msgstr "Emuleer derde knop?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "IDE word opgestel"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Mount"
+msgstr "Heg"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Stel PCMCIA op..."
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Outoinstallasieskyf word geskep."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Installeer stelsel"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "Knop-3 emulasie"
+msgid "text box height"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "Knop-2 Emulasie"
+msgid "State"
+msgstr "Toestand"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Knoppie-emulasie"
+msgid "Be sure a media is present for the device %s"
+msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid "Enable multiple profiles"
+msgstr "Gebruik multiprofiele"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Muispoort"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Wat is u muistoestel?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Opgradeer"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Is hierdie 'n installasie of opgradering?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Installeer/Opgradeer"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Local printer"
+msgstr "Plaaslike drukker"
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Quit"
-msgstr "Verlaat"
+msgid "Files Restored..."
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "License agreement"
-msgstr "Lisensieooreenkoms"
+msgid "Package selection"
+msgstr "Pakketkeuse"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "An error occurred"
-msgstr "'n Fout het voorgekom"
+msgid "Mauritania"
+msgstr ""
 
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
 msgstr ""
-" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Mandrake Linux Installasie %s"
 
-#: ../../install_steps.pm:1
-#, c-format
-msgid "No floppy drive available"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "Welkom by %s"
-
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
 msgstr ""
-"Sekere belangrike pakkette het nie korrek geпnstalleer nie.\n"
-"Уf die CDROM-aandrywer уf die CD is foutief.\n"
-"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "Duplikaat hegpunt %s"
+msgid "All primary partitions are used"
+msgstr "Alle primкre partisies is gebruik"
 
-#: ../../install_steps.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
-"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
-"nie. Gaan op u eie risiko voort."
+"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
+"om die rekenaarnaamveranderingprobleem te voorkom."
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../services.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Wag asb."
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Sluit konfigurasie af"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Ok"
-msgstr "OK"
+msgid "Configuring IDE"
+msgstr "IDE word opgestel"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor is nie opgestel nie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Stel muistoestel op"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Finish"
+msgid "Cocos (Keeling) Islands"
 msgstr ""
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Konnekteer aan die internet"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Basic"
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
 
-#: ../../interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Advanced"
-msgstr "Gevorderd"
+msgid "Provider phone number"
+msgstr "Voorsiener se telefoonnommer"
 
 #
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Remove"
-msgstr "Verwyder drukker"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#, c-format
-msgid "Modify"
-msgstr "Verander"
+msgid "Host %s"
+msgstr "Rekenaarnaam"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "Voeg by"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "Armenies (oud)"
 
-#: ../../interactive.pm:1
-#, c-format
-msgid "Choose a file"
-msgstr "Kies 'n lкer"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Fiji"
+msgstr "Finnies"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "Second floppy drive"
+msgstr "Tweede sagteskyfaandrywer"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "\"Menu\" key"
+msgid "About Harddrake"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Drive capacity"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
 msgstr ""
+"Sit 'n floppie in die aandrywer.\n"
+"Alle data op hierdie floppie sal verloor word."
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Size: %s"
+msgstr "Grootte: %s"
 
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Control and Shift keys simultaneously"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Both Shift keys simultaneously"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d sekondes"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right Alt key"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "Netwerkkonfigurasie"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Jugoslaavs (latynse uitleg)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Viлtnamees \"nommerry\" QWERTY"
+msgid "No password"
+msgstr "Geen wagwoord"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "VSA internasionale sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "seriaal"
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "VSA sleutelbord"
+msgid "There is no existing partition to use"
+msgstr "Daar is geen bestaande partisies om te gebruik nie"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "UK keyboard"
-msgstr "VK sleutelbord"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ukrainian"
-msgstr "Ukranies"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
+"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
+"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
+"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
+"wat saam met die hardeware gekom het."
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Turks (moderne \"Q\" modem)"
+msgid "Hard drive information"
+msgstr "Hardeskyfinligting"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Turks (tradisionele \"F\" model)"
+msgid "Russian"
+msgstr "Russies"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tajik keyboard"
-msgstr "Tajik sleutelbord"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Iranies"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Thai keyboard"
-msgstr "Thai sleutelbord"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid het gefaal"
 
-#: ../../keyboard.pm:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Armenies (tikmasjien)"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Eksterne drukker"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Tamil (ISCII-layout)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Serwies (Kirillies)"
+msgid "Sorry, no floppy drive available"
+msgstr "Jammer, geen sagteskyfaandrywer beskikbaar nie"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovaaks (QWERTY)"
+msgid "Bolivia"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovaaks (QWERTZ)"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Slovenian"
-msgstr "Sloveens"
+msgid "Bad package"
+msgstr "Foutiewe pakket"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Swedish"
-msgstr "Sweeds"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Russian (Yawerty)"
-msgstr "Russue (Yawerty)"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "Opsies"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Russian"
-msgstr "Russies"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwerty)"
-msgstr "Romanies (QWERTY)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "NIS-domein"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Romanian (qwertz)"
-msgstr "Romanies (QWERTZ)"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "Herlaaitoestel"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Canada"
 msgstr "Kanadees (Quebec)"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Portugees"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Pools (QWERTZ uitleg)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Pools (QWERTY uitleg)"
+msgid "Remove from LVM"
+msgstr "Verwyder uit LVM"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Norweegs"
+msgid "Timezone"
+msgstr "Tydsone"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "Nederlands"
+msgid "German"
+msgstr "Duits"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "Next ->"
+msgstr "Volgende ->"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Maltese (UK)"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Serwies (Kirillies)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
+"\n"
+"Dis hoogs waarskynlik dat hierdie partisie\n"
+"drywerpartisie is en verkieslik alleen gelos\n"
+"moet word.\n"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Macedonian"
-msgstr "Masedonies"
-
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Malayalam"
+msgid "Guinea-Bissau"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Latvies"
-
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Lituanies \"foneties\" QWERTY"
+msgid "Horizontal refresh rate"
+msgstr "Horisontale verfristempo"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Lituanies \"nommerry\" QWERTY"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
+"gebruik word. Verwyder eers die teruglus."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lituanies AZERTY (nuut)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lituanies AZERTY (oud)"
+msgid "USB controllers"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, fuzzy, c-format
-msgid "Laotian"
-msgstr "Latvies"
+msgid "What norm is your TV using?"
+msgstr "Watter tipe is u ISDN-konneksie?"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Latin American"
-msgstr "Latyns-Amerikaans"
+msgid "Type:"
+msgstr "Tipe:"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Koreaanse sleutelbord"
+msgid "Share name"
+msgstr "Drukkernaam:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanees 106 sleutels"
+msgid "enable"
+msgstr "Aktiveer"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Spieлl word gekontak vir die lys van pakkette"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Inuktitut"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
 msgstr ""
+"Daar was 'n probleem met die herlaai van die netwerk.\n"
+"\n"
+"%s"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "Italiaans"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "Terugluslкer %s word geformateer"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Icelandic"
-msgstr "Yslandies"
+msgid "Selected size is larger than available space"
+msgstr "Geselekteerde grootte is groter as beskikbare spasie."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Iranian"
-msgstr "Iranies"
+msgid "NCP server name missing!"
+msgstr "NCP-bedienernaam ontbreek!"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Israelies (Foneties)"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Wat is u muistoestel?"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Israeli"
-msgstr "Israelies"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Korrupte rugsteunlкer"
 
 #: ../../keyboard.pm:1
-#, c-format
-msgid "Croatian"
-msgstr "Kroaties"
+#, fuzzy, c-format
+msgid "Laotian"
+msgstr "Latvies"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "Hongaars"
+msgid "Samoa"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Gurmukhi"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
 msgstr ""
+"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
+"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gujarati"
+msgid "Re-generating list of configured scanners ..."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Grieks"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Selekteer 'n videokaart"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Georgies (Latynse uitleg)"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Georgies (Russiese uitleg)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr ""
+"Die gebruikerskode maag alleenlikui kleinletter, nommers, '-' en '_' bestaan"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Frans"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "verpligtend"
 
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "Finnies"
+msgid "Welcome To Crackers"
+msgstr "Krakers welkom"
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "Spaans"
+msgid "Module options:"
+msgstr "Module opsies:"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Estonian"
-msgstr "Estoniaans"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (VSA)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norweegs)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (VSA)"
+msgid "Go on without configuring the network"
+msgstr "Stel netwerk op"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Deens"
+msgid "Abort"
+msgstr "Aborteer"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Devanagari"
+msgid "No password prompt on %s at port %s"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Duits (geen dooie sleutels)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German"
-msgstr "Duits"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Gebruik beskikbare spasie"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Tseggies (QWERTY)"
+msgid "\t-CDROM.\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Tseggies (QWERTZ)"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "U Windows-partisie is te gefragmenteer. Loop eers 'defrag' asb."
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Switsers (Franse uitleg)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norweegs)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Switsers (Duitse uitleg)"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Belarusian"
-msgstr "Belarussies"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniaans"
+msgid "Unable to fork: %s"
+msgstr "Kon nie vurk nie: %s"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brasiliaans (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulgaars"
+msgid "Type: "
+msgstr "Tipe:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Armenies (Foneties)"
+msgid "<-- Edit Client"
+msgstr "DHCP-Kliлnt"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Bengali"
-msgstr "Aktiveer"
+msgid "no fonts found"
+msgstr "%s is nie gevind nie"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Belgies"
+msgid "Mouse"
+msgstr "Muis"
 
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latyns)"
+msgid "not enough room in /boot"
+msgstr "nie genoeg spasie in /boot nie"
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Arabic"
+msgid "Choosing an arbitratry driver"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Armenies (Foneties)"
-
-#: ../../keyboard.pm:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Armenies (tikmasjien)"
+msgid "Host name"
+msgstr "Rekenaarnaam"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Armenies (oud)"
+msgid "Liechtenstein"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Albanian"
-msgstr "Albanies"
+msgid "the color of the progress bar"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Polish"
-msgstr "Pools"
+msgid "Suppress Fonts Files"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "moontlik"
+msgid "Add to RAID"
+msgstr "Voeg by RAID"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Zambia"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
 msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "South Africa"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Serbia"
-msgstr "seriaal"
+msgid "No floppy drive available!"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mayotte"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Yemen"
-msgstr ""
+msgid "Continue anyway?"
+msgstr "Wil u in elk geval voortgaan?"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Samoa"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Printer"
+msgstr "Drukker"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Vanuatu"
+msgid "Saudi Arabia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Vietnam"
-msgstr ""
+msgid "Internet"
+msgstr "Internet"
 
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
+msgid "Some devices were added:\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Netwerk op pad af"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Vatican"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Uzbekistan"
-msgstr ""
+msgid "Restore From Tape"
+msgstr "Reddingspartisietabel"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Uruguay"
-msgstr ""
+msgid "Choose the profile to configure"
+msgstr "Kies die profiel om te konfigureer"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Uganda"
-msgstr "Opgradeer"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Ukraine"
-msgstr "Ukranies"
+msgid "Backup Now from configuration file"
+msgstr "Netwerkkonfigurasie"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Tanzania"
+msgid "Mount points should contain only alphanumerical characters"
 msgstr ""
 
-#: ../../lang.pm:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Latvies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+msgid "Restarting printing system..."
+msgstr "Watter drukkerstelsel verlang u?"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Turkey"
-msgstr ""
+msgid "See hardware info"
+msgstr "Sien hardeware inligting"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Tonga"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Eerste sektor van herlaaipartisie"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr ""
+msgid "Printer manufacturer, model"
+msgstr "Drukkervervaardiger, model"
 
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Druk sonder drukkertou"
 
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "East Timor"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Tokelau"
+msgid "Subnet Mask:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Tajikistan"
+msgid "LiLo and Bootsplash themes installation successfull"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Thailand"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
 msgstr ""
+"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
+"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
+"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
+"belangrikste.\n"
+"\n"
+"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite diй van u\n"
+"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
+"kies konservatief."
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Togo"
-msgstr ""
+msgid "Modify"
+msgstr "Verander"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "French Southern Territories"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Chad"
+msgid "Need hostname, username and password!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Swaziland"
+msgid "HardDrake"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Syria"
-msgstr ""
+msgid "new"
+msgstr "nuut"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "El Salvador"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "Drukkernaam:"
+msgid "Wizard"
+msgstr "Assistent"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS-domein"
+msgid "Edit selected server"
+msgstr "%s bespeur"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Senegal"
-msgstr "Aktiveer"
+msgid "Please choose where you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "San Marino"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "U moet herlaai om die partisietabelveranderinge te aktiveer"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sierra Leone"
+msgid "Do not include the browser cache"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "Sloveens"
-
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+msgid "Please, choose your keyboard layout."
+msgstr "Wat is u sleutelborduitleg?"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "Sloveens"
+#: ../../mouse.pm:1 ../../security/level.pm:1
+#, c-format
+msgid "Standard"
+msgstr "Standaard"
 
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Saint Helena"
-msgstr ""
+msgid "Please choose your mouse type."
+msgstr "Wat is u muistoestel?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Singapore"
-msgstr ""
+msgid "Connect..."
+msgstr "Konnekteer..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Konfigureer drukker"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Seychelles"
-msgstr "Dop"
+msgid "not configured"
+msgstr "herkonfigureer"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saudi Arabia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Aborteer"
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Russies"
+msgid "Proxies configuration"
+msgstr "Instaanbedienerkonfigurasie"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS-domein"
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "Resolusie"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "Begin: sektor %s\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Qatar"
-msgstr "Toestand"
+msgid "Network interface already configured"
+msgstr "Monitor is nie opgestel nie"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Palau"
+msgid "Couldn't access the floppy!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Paraguay"
+msgid "connecting to Bugzilla wizard ..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Portugal"
-msgstr "Poort"
+msgid "Mail Server"
+msgstr "Datbasis"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Stoor pakketseleksie"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Please click on a partition"
+msgstr "Kliek asb. op 'n partisie"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protokol"
+#: ../../any.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "Druk"
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Have a nice day!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "across Network"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Poland"
-msgstr "Yslandies"
+msgid "Upgrade %s"
+msgstr "Opgradeer"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Pakistan"
-msgstr ""
+msgid "Select Printer Connection"
+msgstr "Kies drukkerkonneksie"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Philippines"
+msgid "Scanning for TV channels in progress ..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Papua New Guinea"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "French Polynesia"
+msgid "IP Range Start:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Peru"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
 msgstr ""
+"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
+"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
+"vir\n"
+"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
+"waarvoor\n"
+"inetd verantwoordelik is."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Panama"
+msgid "the height of the progress bar"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS-domein"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New Zealand"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niue"
-msgstr "Geen video"
-
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Nauru"
+msgid "Argentina"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Nepal"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Nicaragua"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Domeinnaam"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Nigeria"
-msgstr "seriaal"
+msgid "Security Level:"
+msgstr "Sekuriteitsvlak word gestel."
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Norfolk Island"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Hoog"
+msgid "Mount points must begin with a leading /"
+msgstr "Hegpunte moet met 'n / begin"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Masedonies"
+msgid "Postfix Mail Server"
+msgstr "Postfix e-posbediener, Inn netnuusbediener"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Namibia"
-msgstr ""
+msgid "Quit without saving"
+msgstr "Verlaat, maar moenie iets stoor nie"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mozambique"
+msgid "Yemen"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Malaysia"
+msgid "This product is available on the MandrakeStore Web site."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Muis"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Malawi"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Maldives"
+msgid "=> There are many things to choose from (%s).\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mauritius"
-msgstr "Verskeie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Hard drive detection"
+msgstr "Hardeskyfdeteksie."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Malta"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
 msgstr ""
 
-#: ../../lang.pm:1
+#
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "Montserrat"
-msgstr "Muispoort"
+msgid "Please enter the WebDAV server URL"
+msgstr "Toets asb. die muis"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mauritania"
+msgid "Tajikistan"
 msgstr ""
 
-#: ../../lang.pm:1
+#
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Martinique"
-msgstr ""
+msgid "Accept"
+msgstr "Aanvaar "
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr ""
+msgid "Description"
+msgstr "Beskrywing"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr ""
+msgid "Error opening %s for writing: %s"
+msgstr "Four om %s in skryfmode te open: %s"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Myanmar"
-msgstr ""
+msgid "Mouse type: %s\n"
+msgstr "Muistipe: %s\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Mali"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
 msgstr ""
+"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Masedonies"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Wat is u sleutelborduitleg?"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Marshall Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Madagascar"
-msgstr ""
+msgid "Expert Area"
+msgstr "Kundige area"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Moldova"
-msgstr ""
+msgid "Choose a monitor"
+msgstr "Kies 'n monitor"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "Monitor"
+#: ../../any.pm:1
+#, c-format
+msgid "Empty label not allowed"
+msgstr "Leл etiket word nie toegelaat nie"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Morocco"
+msgid "Maltese (UK)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Libya"
-msgstr ""
+msgid "I can't add any more partition"
+msgstr "Ek kan nie meer partisies byvoeg nie"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Latvia"
-msgstr "Latvies"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Size in MB: "
+msgstr "Grootte in MB: "
 
-#: ../../lang.pm:1
+#
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Remote printer"
+msgstr "Eksterne drukker"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Kies asb. 'n taal om te gebruik."
+
+#: ../../network/network.pm:1
 #, c-format
-msgid "Lithuania"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
 msgstr ""
+"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
+"konnekteer.\n"
+"U kan die toestel net so aanvaar.\n"
+"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
 msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties een gebruiker in te teken.\n"
+"Verlang u hierdie funksionaliteit?"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Liberia"
-msgstr "seriaal"
+msgid "Floppy format"
+msgstr "Formatteer"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sri Lanka"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Drukker"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Liechtenstein"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Saint Lucia"
+msgid "The scanners on this machine are available to other computers"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Eerste sektor van herlaaipartisie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Alternatiewe toetsbladsy (A4)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lebanon"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Laos"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Maak boom toe"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Kazakhstan"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Cayman Islands"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
 msgstr ""
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Kuwait"
-msgstr "Verlaat"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Korea"
-msgstr "Nog"
+msgid "Guam"
+msgstr "Speletjies"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Korea (North)"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Opsies/Toets"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Comoros"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
 msgstr ""
+"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
+"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
+"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
+"wagwoord\n"
+"toegang nie."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Kiribati"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "Partisie %s word formateer"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr ""
+msgid "User name"
+msgstr "Gebruikerskode"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr ""
+msgid "New configuration (isdn-light)"
+msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Kenya"
-msgstr "Sleutelbord"
+msgid "Userdrake"
+msgstr "Drukker"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Japan"
-msgstr ""
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Watter partisie wil u vir Linux4Win gebruik?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iranies"
+msgid "Backup system"
+msgstr "Stel lкerstelsels op"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Jamaica"
+msgid "Test pages"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"List of data to restore:\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Iceland"
-msgstr "Yslandies"
+msgid "Checking %s"
+msgstr "LPD word verwyder..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Iran"
-msgstr "Iranies"
+msgid "TCP/Socket Printer Options"
+msgstr "Sokdrukkeropsies"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Iraq"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Kaartgeheue (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "British Indian Ocean Territory"
+msgid "France"
+msgstr "Frankryk"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "browse"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "Iranies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking installed software..."
+msgstr "Installeerde sagteware word deursoek..."
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Israelies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote printer name missing!"
+msgstr "Eksterne drukkernam ontbreek!"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Ireland"
-msgstr "Yslandies"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
 
 #: ../../lang.pm:1
+#, c-format
+msgid "Turkey"
+msgstr ""
+
+#: ../../network/adsl.pm:1
 #, fuzzy, c-format
-msgid "Indonesia"
-msgstr "niks"
+msgid "Alcatel speedtouch usb"
+msgstr "speedtouch USB"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Hungary"
-msgstr "Hongaars"
+msgid "Number of buttons"
+msgstr "2 knoppies"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Haiti"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Viлtnamees \"nommerry\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Croatia"
-msgstr "Kroaties"
+msgid "Module"
+msgstr "Muis"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Honduras"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Heard and McDonald Islands"
+msgid "Hardware"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hong Kong"
+msgid "Ctrl and Alt keys simultaneously"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "China"
+msgid "United States"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Guyana"
-msgstr ""
+msgid "Default OS?"
+msgstr "Verstek bedryfstelsel?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guam"
-msgstr "Speletjies"
+msgid "Swiss (German layout)"
+msgstr "Switsers (Duitse uitleg)"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Portaal"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure all heads independently"
+msgstr "Konfigureer skyfkoppe afsonderlik"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr ""
+msgid "NTP Server"
+msgstr "NTP-bediener"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Guadeloupe"
+msgid "Load/Save on floppy"
+msgstr "Laai/Stoor op floppie"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "This theme does not yet have a bootsplash in %s !"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "nice"
+msgstr "oulik"
+
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Guinea"
-msgstr "Algemeen"
+msgid "Leaving in %d seconds"
+msgstr "%d sekondes"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Gambia"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Greenland"
-msgstr "Yslandies"
+msgid "Country"
+msgstr "Heg"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Poort"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Gibraltar"
+msgid "Ghostscript"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN Configuration"
+msgstr "LAN konfigurasie"
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Ghana"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Frans"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Path or Module required"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Georgia"
-msgstr "Norweegs"
+msgid "Advanced Options"
+msgstr "Sluit konfigurasie af"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Grenada"
+msgid "Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "United Kingdom"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Gabon"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "Yslandies"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Masedonies"
-
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Fiji"
-msgstr "Finnies"
+msgid "Lexmark inkjet configuration"
+msgstr "Internetkonfigurasie"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Finland"
-msgstr ""
+msgid "Undo"
+msgstr "Herroep"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estoniaans"
+msgid "Save partition table"
+msgstr "Skryf partisietabel"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "Spaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Finnish"
+msgstr "Finnies"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Eritrea"
-msgstr "Kundige area"
+msgid "Macedonia"
+msgstr "Masedonies"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Western Sahara"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Leeg"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estoniaans"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "Sloveens"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Ecuador"
+msgid "Libya"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "seriaal"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dominican Republic"
+msgid ""
+"\n"
+"- Burn to CD"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS-domein"
+#: ../../any.pm:1
+#, c-format
+msgid "Table"
+msgstr "Tabel"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Denmark"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "Ek weet nie om %s as tipe %s te formateer nie"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Djibouti"
-msgstr "Aborteer"
+msgid "Model"
+msgstr "Muis"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Cyprus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Christmas Island"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Maak boom toe"
+msgid "Modem"
+msgstr "Muis"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Cuba"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Colombia"
+msgid "Tuvalu"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Cameroon"
+msgid "Use auto detection"
+msgstr "Gebruik outobespeuring"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
 msgstr ""
+"GPM verleen muisvermoлns aan teksgebaseerde Linuxapplikasies soos\n"
+"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
+"konsole toe asook opspringkieskaarte."
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Chile"
-msgstr "Sluit af"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Started on boot"
+msgstr "Gelaai tydens herlaaityd"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Cook Islands"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Switzerland"
+msgid "Automatically find available printers on remote machines"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Central African Republic"
+msgid "East Timor"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "Del profile..."
+msgstr "Vee profiel uit..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Canada"
-msgstr "Kanadees (Quebec)"
+msgid "Installing Foomatic..."
+msgstr "Installeer pakket %s"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belize"
-msgstr "Verstel Grootte"
+#: ../../standalone/XFdrake:1
+#, c-format
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Belarus"
-msgstr "Belarussies"
+msgid "detected"
+msgstr "%s bespeur"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estoniaans"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Bouvet Island"
+msgid "The network needs to be restarted. Do you want to restart it ?"
 msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bhutan"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Pakketkeuse"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bahamas"
+msgid "Can't write /etc/sysconfig/bootsplash."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Brazil"
+msgid "SECURITY WARNING!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Kantoor"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bolivia"
-msgstr ""
+msgid "No, I don't want autologin"
+msgstr "Nee, ek verlang outo-aanteken"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Brunei Darussalam"
+msgid "Windows Migration tool"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Bermuda"
-msgstr "Duits"
+msgid "All languages"
+msgstr "Kies u taal"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Benin"
-msgstr "Belgies"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Removing %s"
+msgstr "LPD word verwyder..."
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Bahrain"
-msgstr ""
+msgid "Testing your connection..."
+msgstr "Konneksie word getoets..."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "Hongaars"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr ""
+msgid "Cache size"
+msgstr "blokgrootte"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Bangladesh"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
 msgstr ""
+"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
+"aanbeveel nie."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Barbados"
-msgstr ""
+msgid "Start sector: "
+msgstr "Kies sektor: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Bosnia and Herzegovina"
+msgid "Congo (Brazzaville)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Albanies"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "seriaal"
+msgid "Seychelles"
+msgstr "Dop"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "American Samoa"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
 msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Geen wagwoord"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Argentina"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
+msgid "Zambia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Angola"
+msgid "Security Administrator (login or email)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Netherlands Antilles"
+msgid "Sorry, we support only 2.4 kernels."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "Armenies (oud)"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Albanies"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Romanian (qwerty)"
+msgstr "Romanies (QWERTY)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anguilla"
+msgid "Under Devel ... please wait."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
+msgid "Czech Republic"
 msgstr ""
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Egypt"
+msgstr "Leeg"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr ""
+msgid "Old configuration (isdn4net)"
+msgstr "Ou konfigurasie (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Sound card"
+msgstr "Klankkaart"
+
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Andorra"
-msgstr "Herroep"
+msgid "Import Fonts"
+msgstr "Formateer partisies"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Albanies"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"U het een massiewe FAT partisie. \n"
+"(gewoonlik deur DOS/Windows gebruik)\n"
+"Ek stel voor u verstel eers die grootte van diй partisie\n"
+"(kliek daarop en kliek dan op \"Verstel Grootte\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../loopback.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Sirkulкre heg %s\n"
+msgid "Change partition type"
+msgstr "Verander partisietipe"
 
-#: ../../lvm.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Verwyder eers die logiese volumes\n"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../modules.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"Display theme\n"
+"under console"
 msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "BEWEEG DIE WIEL!"
+msgid "Statistics"
+msgstr ""
 
-#
-#: ../../mouse.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "To activate the mouse,"
-msgstr "Om die muis te aktiveer"
+msgid "(on %s)"
+msgstr "(op %s)"
 
-#
 #: ../../mouse.pm:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Toets asb. die muis"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "No mouse"
-msgstr "Geen muis"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "none"
-msgstr "niks"
+msgid "average"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 knoppies"
+msgid "New printer name"
+msgstr "Nuwe drukkernaam"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 knoppies"
+msgid "Equatorial Guinea"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "1 button"
-msgstr "1 knop"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "busmouse"
-msgstr "busmuis"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Romanian (qwertz)"
+msgstr "Romanies (QWERTZ)"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "herkonfigureer"
 
-#: ../../mouse.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
+"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
+"meer komplekse protokolle nodig vir komplekse netwerke."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Kiribati"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Reeks (seriaal)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Browse"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "CDROM"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Wil u nou aan die internet konnekteer?"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generiese 3-knop muis"
+msgid "Belgian"
+msgstr "Belgies"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generiese 2-knop muis"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "Beskik u oor nog?"
 
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "serial"
-msgstr "seriaal"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie.\n"
+"Ek kan nie hierdie konneksietipe opstel nie."
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Windows"
+msgstr "NIS-domein"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Ek kan nie meer partisies byvoeg nie"
 
 #
-#: ../../mouse.pm:1
-#, c-format
-msgid "Wheel"
-msgstr "Wiel"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Rekenaarnaam"
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Generic"
-msgstr "Generies"
+msgid "/File/Save _As"
+msgstr "/Lкer/Stoor _as"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generiese PS2 wielmuis"
+msgid "Delay before booting default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
 
-#: ../../mouse.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Restrict command line options"
+msgstr "Beperk instruksielynopsies"
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
-#, c-format
-msgid "Standard"
-msgstr "Standaard"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Europa"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Muis"
+msgid "Use free space"
+msgstr "Gebruik beskikbare spasie"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Skakel tussen plat- en groepsortering"
+msgid "use dhcp"
+msgstr "gebruik dhcp"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "Maak boom toe"
+msgid "Mail alert"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Maak boom oop"
+msgid "Internet configuration"
+msgstr "Internetkonfigurasie"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Info"
-msgstr "Info"
+msgid "Uzbekistan"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Is dit korrek?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s bespeur"
 
-#: ../../my_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "/Autodetect _printers"
+msgstr "Gebruik outobespeuring"
 
-#: ../../partition_table.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Fout in die skryf van %s"
+msgid "Finish"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Bad backup file"
-msgstr "Korrupte rugsteunlкer"
+msgid "Show automatically selected packages"
+msgstr "Wys outogeselekteerde pakkette."
 
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Herstel van lйer %s het gefaal: %s"
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Togo"
 msgstr ""
-"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
-"Die enigste oplossing is om die primкre partisie te skuif sodat die gat\n"
-"langs die ekstensie partisies is"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "heg het gefaal"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../pkgs.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "maybe"
-msgstr "moontlik"
+msgid "Please try again"
+msgstr "Probeer asb. weer"
 
-#: ../../pkgs.pm:1
-#, c-format
-msgid "nice"
-msgstr "oulik"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "Is dit korrek?"
 
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "very nice"
-msgstr "baie oulik"
+msgid "FAT resizing failed: %s"
+msgstr "FAT-grootteverandering het gefaal: %s"
 
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "important"
-msgstr "belangrik"
+msgid "Individual package selection"
+msgstr "Individuele pakketseleksie"
 
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "must have"
-msgstr "benodig"
+msgid "This partition is not resizeable"
+msgstr "Hierdie partisie se greootte kan nie verstel word nie"
 
-#: ../../raid.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
+msgid "Location"
+msgstr "Ligging"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid het gefaal"
+msgid "USA (cable-hrc)"
+msgstr ""
 
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "Gejoernaliseer"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Portaal"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(op hierdie rekenaar)"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid het gefaal. Dalk is 'raidtools' nie beskikbaar nie."
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Kan nie 'n partisie by geformatteerde RAID md%d byvoeg nie"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr ""
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Toestand"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "laat SCSI-modules weg"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "On boot"
-msgstr "met herlaai"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
 msgstr ""
+"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
+"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
+"& Netwerkkonneksie te herkonfigureer.\n"
 
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "Sleutelbord uitleg: %s\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "stopped"
-msgstr "onaktief"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "running"
-msgstr "aktief"
+msgid "Maltese (US)"
+msgstr ""
 
 #: ../../services.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Heg en ontheg all netwerklкerstels (NFS), SMB (Lan Manger/Windows)\n"
+"en NCP (Netware) hegpunte."
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Database Server"
-msgstr "Datbasis"
+msgid "Tvcard"
+msgstr "TV-kaaer"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "Toggle between normal/expert mode"
+msgstr "Skakel oor na normale gebruiksvlak"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "Grootte"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Internet"
-msgstr "Internet"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Printing"
-msgstr "Druk"
+msgid "Greenland"
+msgstr "Yslandies"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Laai die X-fontbediener (dis nodig vir XFree)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Laai die drywers vir u USB-toestelle"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
-"te log na 'n verskeidenheid loglкers. Dit is altyd goed om syslog te loop."
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans aktief.\n"
+"\n"
+"Wat wil u doen?"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Laai die klankstelsel op u rekenaar"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Selekteer lOer"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
 msgstr ""
-"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
-"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
-"'finger')."
 
-#: ../../services.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
 msgstr ""
-"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
-"aangeteken is op ander samewerkende rekenaars."
 
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"Die 'rstat' protokol laat gebruikers op 'n netwerk toe om\n"
-"werksverrigtinginligting oor enige rekenaar op die netwerk te onttrek."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Watter tipe XFree-konfigurasie verlang u?"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
+msgid "More"
+msgstr "Nog"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
 msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
 msgstr ""
-"Die 'routed' diensprogram hanteer outomatiese IP-roeteertabelopdatering\n"
-"via die RIP protokol. Alhoewel RIP baie gebruik word in klein netwerke, is\n"
-"meer komplekse protokolle nodig vir komplekse netwerke."
+"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
+"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliлnte\n"
+"af kan aanvaar."
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Wagwoord"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tajik keyboard"
+msgstr "Tajik sleutelbord"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
-"Stoor en herstel die stelselentropiepoel vir hoл kwaliteit,\n"
-"lukraaknommergenerasie."
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
-"van een bediener na 'n ander oordra."
+msgid "Font List"
+msgstr "Hegpunt"
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 msgstr ""
-"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
-"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
-"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
 msgstr ""
-"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
-"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
-"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
-"veilig om op rekenaars te hк wat dit nie nodig het nie."
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Ondersteun die OKI-4W en aanpasbare WIN-drukkers"
+msgid "Select file"
+msgstr "Selekteer lOer"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
-"NFS is 'n populкre protokol vir lкerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens vorosien die NFS-lкersluitfunksionaliteit."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Japan"
 msgstr ""
-"NFS is 'n populкre protokol vir lкerdeling oor TCP/IP netwerke.\n"
-"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
-"die /etc/exports lкer opgestel."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Drukkeropsies"
+
+#: ../../standalone/localedrake:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
 msgstr ""
-"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
-"herlaaityf te begin."
 
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS bediener"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
+msgstr "NCP-tounaam ontbreek!"
+
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
 msgstr ""
-"Heg en ontheg all netwerklкerstels (NFS), SMB (Lan Manger/Windows)\n"
-"en NCP (Netware) hegpunte."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CDROM getiteld \"%s\""
 
 #: ../../services.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
-"named (BIND) is die domeinnaamdiens (DNS) wat gebruik word om\n"
-"rekenaarname na IP-adresse toe om te skakel."
+"Stoor en herstel die stelselentropiepoel vir hoл kwaliteit,\n"
+"lukraaknommergenerasie."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "Turn your computer into a reliable server"
 msgstr ""
-"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
-"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
 
-#: ../../services.pm:1
+#: ../../network/network.pm:1
 #, c-format
+msgid " (driver %s)"
+msgstr "(drywer %s)"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
 msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr "Teruglus lкer(s): %s\n"
 
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Outobespeuring en hardewarekonfigurasie met herlaaityd."
+msgid "I don't know"
+msgstr "Ek weet nie"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid ", TCP/IP host \"%s\", port %s"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
-"keyboard\n"
-"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
-"dit\n"
-"op meeste rekenaars ongesper laat."
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Verlaay installasie"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid " ("
 msgstr ""
-"Die internetsuperbedienerdiensprogram (gewoonlik inetd genoem) laai 'n\n"
-"verskeidenheid internetdienste soos nodig. Dit is gewoonlik verantwoordelik "
-"vir\n"
-"telnet, ftp, rsh en rlogin. As inetd gesper word, sper dit ook die dienste "
-"waarvoor\n"
-"inetd verantwoordelik is."
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache is 'n WWW-bediener.\n"
-"Dit kan HTML-lкers uitstuur en CGI's hanteer"
+msgid "Add a module"
+msgstr "Voeg module by"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
+msgid "Profile to delete:"
+msgstr "Profiel om uit te vee..."
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Plaaslike lкers"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM verleen muisvermoлns aan teksgebaseerde Linuxapplikasies soos\n"
-"Midnight Commander. Dit laat muisgebaseerde knip-en-plak aksies op die\n"
-"konsole toe asook opspringkieskaarte."
+msgid "busmouse"
+msgstr "busmuis"
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
-"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
-"funksionaliteit\n"
-"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
-"konfigurasie."
+msgid "Account Login (user name)"
+msgstr "Gebruikerskode"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Fdiv bug"
 msgstr ""
-"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
-"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
 
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
 msgstr ""
-"apmd word gebruik om battery status te monitor en dit dan te log via "
-"syslog.\n"
-"Dit kan ook gebruik word om die rekenaar af te bring wanneer die battery "
-"swak is."
 
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron is skeduleerder vir periodiese instruksies."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Belgies"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Loop die ALSA (Gevorderde Linux Klankargitektuur) klankstelsel"
+msgid "Uruguay"
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Installeer pakket %s"
+msgid "Path selection"
+msgstr "Stoor pakketseleksie"
 
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
 msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
 msgstr ""
+"Iets vrots gebeur op u hardeskyf.\n"
+"'n Dataintegriteitstoets het misluk.\n"
+"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
+"eindig."
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Drukkerbedienernaam ontbreek!"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Kies die pakkette wat u wil installeer"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgid "Bangladesh"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
 "\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Beginboodskap"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Gaan voort"
 
-#: ../../standalone.pm:1
+#
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Sleutelbord"
+msgid "Custom Restore"
+msgstr "Aangepaste"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skriptipe"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "Fout met die les van lкer %s"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "Formatering"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "U moet oor 'n FAT partisie wat as /boot/efi geheg is, beskik"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
 msgstr ""
+"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
+"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
+"spoelprogramme ondersteun nie."
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "Ander bedryfstelsel (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Installeer/Opgradeer"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d pakkette"
 
 #: ../../standalone.pm:1
 #, c-format
@@ -6243,3364 +5822,3807 @@ msgid ""
 "--version             : show version number.\n"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Magtiging"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Exit install"
-msgstr "Verlaay installasie"
+msgid "Costa Rica"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Install updates"
-msgstr "Installeer stelsel"
+msgid "Use libsafe for servers"
+msgstr "Selekteer opsies vir bediener"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Konfigureer dienste"
+msgid "Icelandic"
+msgstr "Yslandies"
 
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "Stel X op"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Installeer herlaaistelsel"
+msgid "Please relog into %s to activate the changes"
+msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure networking"
-msgstr "Stel netwerk op"
+#: ../../my_gtk.pm:1
+#, fuzzy, c-format
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Add a user"
-msgstr "Voeg 'n gebruiker by"
+msgid "Lilo/grub mode"
+msgstr "LILO/GRUB metode"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Root password"
-msgstr "Kies 'root' se wagwoord"
+msgid "Output"
+msgstr "Uitset"
 
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Installeer stelsel"
+msgid "Circular mounts %s\n"
+msgstr "Sirkulкre heg %s\n"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Kies pakkette om te installeer"
+msgid "Martinique"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Format partitions"
-msgstr "Formateer partisies"
+msgid "HardDrive / NFS"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
 #, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Druk"
+msgid "a number"
+msgstr "Telefoonnommer"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "Kies u sleutelbord"
+msgid "Swedish"
+msgstr "Sweeds"
 
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Kies installasieklas"
+msgid "Which %s driver should I try?"
+msgstr "Watter %s drywer meot ek probeer?"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Hardeskyfdeteksie."
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Stel muistoestel op"
+msgid "Filesystem types:"
+msgstr "LOersteltipes:"
 
-#: ../../steps.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "License"
+msgid ", multi-function device on HP JetDirect"
 msgstr ""
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Language"
-msgstr "Kies u taal"
-
-#: ../../ugtk2.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "utopia 25"
+msgid "Northern Mariana Islands"
 msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "OK"
-msgstr "OK"
+msgid "none"
+msgstr "niks"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Gebruikerskode"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "Probeer asb. weer"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "logdrake"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
 msgstr ""
 
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "Stoor op floppie"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (installasievertoondrywer)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Kliek asb. op 'n partisie"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "Ghostscript referencing"
 msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Bootloader"
+msgstr "Herlaaistelsel om te gebruik"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
+msgid "Move"
+msgstr "Skuif"
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"U videokaart kan vir 3D-hardewareversnelling ondestuen word in XFree %s."
+msgid "Bootloader to use"
+msgstr "Herlaaistelsel om te gebruik"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s met 3D-hardwareversnelling"
+msgid "SMB server host"
+msgstr "SMB-bedienernaam"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS-bediener"
+
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
-"bied,\n"
-"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES.\n"
-"U kaart word deur XFree %s ondersteun, wat beter 2D-ondersteuning bied."
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
-"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "4 billion colors (32 bits)"
+msgstr "4 biljoen kleure (32 bis)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Konfigureer net die \"%s\" kaart (%s)"
+msgid "Micronesia"
+msgstr "Masedonies"
 
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Gebruik Xinerama-ekstensies"
+msgid "License"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "Konfigureer skyfkoppe afsonderlik"
+msgid "This may take a moment to generate the keys."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Watter tipe XFree-konfigurasie verlang u?"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "XFree-konfigurasie"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Kies die geheue grootte van u videokaart"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
-"U stelsel onderstuen multikopkonfigurasie.\n"
-"Wat wil u doen?"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Multi-head configuration"
-msgstr "Multikopkonfigurasie"
+"'n Fout het voorgekom - geen geldige toestelle om die nuwe lкerstelsels op "
+"te skep, is gevind nie. Deursoek asb. die hardeware vir die oorsaak."
 
-#: ../../Xconfig/card.pm:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Kies 'n X-bediener"
+msgid "Starting the printing system at boot time"
+msgstr "Watter drukkerstelsel verlang u?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "X server"
-msgstr "X-bediener"
+msgid "Do you want to start the connection at boot?"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64MB of meer"
+msgid "Processor ID"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Sound trouble shooting"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Polish (qwerty layout)"
+msgstr "Pools (QWERTY uitleg)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "activate now"
+msgstr "Aktiveer nou dadelik"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Host \"%s\", port %s"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "This partition can't be used for loopback"
+msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "File already exists. Use it?"
+msgstr "Lкer bestaan alreeds. Moet dit gebruik word?"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+msgid "received: "
 msgstr ""
-"Behou die veranderinge?\n"
-"Huidige konfigurasie is:\n"
-"\n"
-"%s"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Opsies"
-
-#: ../../Xconfig/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Test"
+msgid "Right Alt key"
 msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Resolution"
-msgstr "Resolusie"
+msgid "the list of alternative drivers for this sound card"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Monitor"
-msgstr "Monitor"
+msgid "Gateway"
+msgstr "Portaal"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Videokaart"
+msgid "Scanner sharing"
+msgstr "Druk"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Vertikale verfristempo"
+msgid "Tonga"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Horisontale verfristempo"
+msgid "Tunisia"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Die kritiese twee parameters is die vertikale verfristempo (die tempo\n"
-"waarteen die hele skerm verfris) en die horisontale sinkronisasietempo (die\n"
-"tempo waarteen die horisontale skandeerlyne vertoon word). Lg. is die\n"
-"belangrikste.\n"
-"\n"
-"Dit is BAIE BELANGRIK dat u nie 'n sinkronisasie bereik buite diй van u\n"
-"monitor spesifiseer nie, dit kan die monitor beskadig. Indien u twyfel,\n"
-"kies konservatief."
+msgid "Profile: "
+msgstr "Profiel:"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "Herroep"
-
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Plug'n Play"
+msgid "XawTV isn't installed!"
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Kies 'n monitor"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Videokaart: %s"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Kies die resolusie en kleurdiepte"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Resolutions"
-msgstr "Resolusies"
+msgid "This label is already used"
+msgstr "Hierdie etiket is alreeds in gebruik"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 biljoen kleure (32 bis)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16-miljoen kleure (24 bis)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met formatering."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65-duisend kleure (16 bis)"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Konneksietipe:"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32-duisend kleure (15 bis)"
+msgid "select perm file to see/edit"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 kleure (8 bis)"
+msgid ""
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
+msgstr ""
+"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
+"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Is dit korrek?"
+msgid "Use group id for execution"
+msgstr "Gebruik outobespeuring"
 
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d sekondes"
+#: ../../any.pm:1
+#, c-format
+msgid "Choose the default user:"
+msgstr "Kies die verstek gebruiker:"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+msgid "Gabon"
 msgstr ""
 
-#: ../../Xconfig/test.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Waarskuwing: Toetsing is gevaarlik met hierdie videokaart"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Wil u die konfigurasie toets?"
+msgid ""
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
+msgstr ""
+"\n"
+"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
+"op te stel nie; drukkers wod outomaties bespeur.\n"
+"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
 
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Toets konfigurasie"
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
 
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Domain"
+msgstr "NIS-domein"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Presiese RAM grootte indien nodig (%d MB bespeur)"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"Do you have this feature?"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
-"Wil u X begin met 'n herlaai?"
+msgid "Provider dns 2 (optional)"
+msgstr "Voorsiener DNS 2 (opsioneel)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Graphical interface at startup"
-msgstr "X met herlaai"
+msgid "Boot device"
+msgstr "Herlaaitoestel"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86-drywer: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Watter partisie se grootte wil u verander?"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 bediener: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Resolusie: %s\n"
+msgid "A tool to monitor your logs"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "Aborteer"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Kleurdiepte: %s\n"
+msgid "detected on port %s"
+msgstr "Op poort %s bespeur"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Video geheue: %s kB\n"
+msgid "LPD"
+msgstr "LPD"
 
 #: ../../Xconfig/various.pm:1
 #, c-format
 msgid "Graphics card: %s\n"
 msgstr "Videokaart: %s\n"
 
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitor VertVerfris: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitor HoriSink: %s\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Kliek asb. op 'n partisie"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Stoor pakketseleksie"
 
-#: ../../Xconfig/various.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Muistoestel: %s\n"
+msgid "Extended partition not supported on this platform"
+msgstr "Ekstensiepartisie word nie op hierdie platform ondersteun nie"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Muistipe: %s\n"
+msgid "ISDN Configuration"
+msgstr "ISDN Konfigurasie"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Hoog"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Sleutelbord uitleg: %s\n"
+msgid "Internet Connection Sharing"
+msgstr "Internetkonneksiedeling"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Options: %s"
-msgstr "Opsies: %s"
+msgid "Choose file"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Mount point: "
-msgstr "Hegpunt:"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
+"dietyd self regstellings moet aanbring."
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Server: "
-msgstr "Bediener"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Netwerk op pad af"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr ""
 
-#
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Toets asb. die muis"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Hegpunt"
+msgid "Printer default settings"
+msgstr "Drukkermodelkeuse"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Server"
-msgstr "Bediener"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generiese PS2 wielmuis"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "Heg"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Drukkerdata word gelees..."
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Unmount"
-msgstr "Ontheg"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Selekteer 'n videokaart"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "New"
-msgstr "nuut"
+msgid "Remove selected server"
+msgstr "Verwyder tou"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+msgid "French Southern Territories"
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Gebruik ``%s'' instede."
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Type"
-msgstr "Tipe"
+msgid "the vendor name of the processor"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Gebruik ``Ontheg'' eerste"
+msgid "All data on this partition should be backed-up"
+msgstr "Alle data om hierdie partisie moet gerugsteun word."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Delete"
-msgstr "Uitwis"
+msgid "Installing package %s"
+msgstr "Installeer pakket %s"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Create"
-msgstr "Skep"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "LOersteltipes:"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr ""
+"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
+"skep"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Leeg"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS-domein"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Choose packages to install"
+msgstr "Kies pakkette om te installeer"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Ruilarea"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "Gejoernaliseer"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Alle bestaande partisies en data sal uitgewis word op skyf %s"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"U stelsel het nie genoeg plek vir 'n installasie of opgradering nie (%d > %d)"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Plaaslike drukker"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Elke drukker benodig  naam (bv. lp).\n"
+"Die Beskrywing- en Liggingvelde is opsioneel.\n"
+"Hulle dien as inligting vir gebruikers."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
-"U het een massiewe FAT partisie. \n"
-"(gewoonlik deur DOS/Windows gebruik)\n"
-"Ek stel voor u verstel eers die grootte van diй partisie\n"
-"(kliek daarop en kliek dan op \"Verstel Grootte\")"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose action"
-msgstr "Kies aksie"
+msgid "Bhutan"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Wizard"
-msgstr "Assistent"
+msgid "Network interface"
+msgstr "Netwerkkoppelvlak"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
-"van die skyf. (2048 sektors is genoeg)."
+msgid "Reading printer data..."
+msgstr "Drukkerdata word gelees..."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Rugsteun u data eers asb."
+msgid "Korean keyboard"
+msgstr "Koreaanse sleutelbord"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Lees noukeurig!"
+msgid "Not connected"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "Greek"
+msgstr "Grieks"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr ""
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Die wagwoorde stem nie ooreen nie."
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
 msgstr ""
-"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
+msgid "Saint Kitts and Nevis"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "LOerstelseltipe: "
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Tipe:"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "op bus %d id %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "Partisietabeltipe: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-skywe %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Info:"
+msgid "Enable OF Boot?"
+msgstr "Laat OF-herlaai toe?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Geometrie: %s silinders, %s koppe, %s sektore\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "U kan nie JFS vir partisies kleiner as 16MB gebruik nie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Grootte: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitor VertVerfris: %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Read-only"
+msgid "path"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Device: "
-msgstr "Toestel:"
+msgid "Mount point"
+msgstr "Hegpunt"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"\n"
-"Hierdie spesiale herlaaipartisie\n"
-"is om u stelsel te duolaai.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
+msgid "Restore system"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
 msgstr ""
-"\n"
-"Dis hoogs waarskynlik dat hierdie partisie\n"
-"drywerpartisie is en verkieslik alleen gelos\n"
-"moet word.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Teruglus lкernaam: %s"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-skywe %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Internet"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Blokgrootte %s\n"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Vlak %s\n"
+msgid "Colombia"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Verstekpartisie vir herlaai\n"
-"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Teruglus lкer(s): %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Plug'n Play"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Geheg\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Reunion"
+msgstr "Resolusie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Nie geformatter\n"
+msgid "Details"
+msgstr "Detail"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Formatted\n"
-msgstr "Geformateer\n"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silinder %d na silinder %d\n"
+msgid "Checking your system..."
+msgstr "Watter drukkerstelsel verlang u?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", %s sectors"
-msgstr ", %s sektore"
+msgid "Print"
+msgstr "Druk"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size: %s"
-msgstr "Grootte: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "Begin: sektor %s\n"
+msgid "Mongolia"
+msgstr ""
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Naam: "
+msgid "Mounted\n"
+msgstr "Geheg\n"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS-skyfletter: %s ('n raaiskoot)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X met herlaai"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Herstel vanaf lкer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s"
-msgstr "LPD word verwyder..."
+msgid "Encryption key for %s"
+msgstr "Die wagwoorde stem nie ooreen nie."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
+"Portmapper bestuur RPC-konneksies wat deur protokolle soos NFS en NIS\n"
+"gebruik word. Portmap moet loop op rekenaars wat as bedieners vir hierdie\n"
+"protokolle, en ander protokolle wat die RPC meganisme gebruik, dien."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "Detected hardware"
+msgstr "Sien hardeware inligting"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mauritius"
+msgstr "Verskeie"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Myanmar (Burmese)"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid het gefaal"
+msgid "Enabling swap partition %s"
+msgstr "Partisie %s word formateer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met formatering."
+msgid "Armenian (old)"
+msgstr "Armenies (oud)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "U sal moet herlaai voor die veranderinge geaktiveer kan word"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Partisietabel van skyf %s gaan opdateer word!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
 msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "Watter tipe van partisionering?"
+msgid ", host \"%s\", port %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "Monitor"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "blokgrootte"
+msgid "%s formatting of %s failed"
+msgstr "%s formatering ban %s het gefaal"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "level"
-msgstr "vlak"
+msgid "Partitioning failed: %s"
+msgstr "Partisionering het misluk: %s"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "toestel"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Kanadees (Quebec)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Opgradeer"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Various"
-msgstr "Verskeie"
+msgid "Workstation"
+msgstr "Werkstasie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mount options"
-msgstr "Hegopsies:"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Installeer nou pakket %s\n"
+"%d%%"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Lкer bestaan alreeds. Moet dit gebruik word?"
+msgid "Kyrgyzstan"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Lкer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
+msgid "With basic documentation"
+msgstr "dokumentasie"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Regte naam"
+#: ../../services.pm:1
+#, c-format
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron is skeduleerder vir periodiese instruksies."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "LOerstelseltipe: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"U moet 'n wortelpartisie definieer.\n"
+"Skep 'n partisie of kliek op 'n bestaande een.\n"
+"Kies dan Hegpunt en stel dit dan '/'."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Size in MB: "
-msgstr "Grootte in MB: "
+msgid "Proxy should be http://..."
+msgstr "Instaanbediener moet begin met http://"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Teruglus lкernaam:"
+msgid "South Africa"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Loopback"
-msgstr "Teruglus"
+msgid "Western Sahara"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Hierdie partisie kan nie vir teruglus gebruik word nie."
+msgid "Etherboot Floppy/ISO"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "LVM naam?"
+msgid "Modify printer configuration"
+msgstr "Verander drukkerkonfigurasie"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "new"
-msgstr "nuut"
+msgid "Choose a partition"
+msgstr "Kies 'n partisie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Kies 'n bestaande LVM om by toe te voeg"
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Kies 'n bestaande RAID om by toe te voeg"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Partisie word verskuif..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#
+#: ../../mouse.pm:1
 #, c-format
-msgid "Moving"
-msgstr "Verskuiwing"
+msgid "Please test the mouse"
+msgstr "Toets asb. die muis"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Ander"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Korrupte rugsteunlкer"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "Na watter sektor wil u skuif?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Sector"
 msgstr "Sektor"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "Na watter skyf wil u skuif?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "Skuif"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Qatar"
+msgstr "Toestand"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New size in MB: "
-msgstr "Nuwe grootte in MB: "
+msgid "LDAP Base dn"
+msgstr "LDAP Basis-dn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Kies die nuwe grootte"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"U kan nie hierdie pakket selekteer nie, omdat daar nie meer spasie "
+"beskikbaar is nie"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Verstel Grootte"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Skep outoinstallasieskyf"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
+msgid "Dialing mode"
+msgstr "Belmetode"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Alle data om hierdie partisie moet gerugsteun word."
+msgid "File sharing"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Hierdie partisie se greootte kan nie verstel word nie"
+msgid "Clean /tmp at each boot"
+msgstr "Maak /tmp skoon met elke herlaai"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "FAT lкerstelselgrense word bereken"
+msgid "Malawi"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "Please choose your type of mouse."
+msgstr "Wat is u muistoestel?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
-"Kan nie hegpunt ontset nie, omdat hierdie partisie vir teruglus\n"
-"gebruik word. Verwyder eers die teruglus."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Waar wil u toestel %s heg?"
+msgid "United Kingdom"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Waar wil u terugluslкer %s heg?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "aktief"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Oorskakeling van ext2 na ext3"
+msgid "default"
+msgstr "verstek"
 
-#
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "niks"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "Frankryk"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "Watter lкerstelsel verlang u?"
+msgid "restrict"
+msgstr "beperk"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Verander partisietipe"
+msgid "must have"
+msgstr "benodig"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
-"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
-"partisietipe"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Terugluslкer %s word geformateer"
+msgid "Senegal"
+msgstr "Aktiveer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Domeinnaam"
+
+#: ../../share/advertising/08-store.pl:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "Voorkeure: "
+msgid "access to administrative files"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start sector: "
-msgstr "Kies sektor: "
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Kies 'n nuwe grootte"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Gebruik vir teruglus"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "Verander RAID"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Montserrat"
+msgstr "Muispoort"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Verwyder uit LVM"
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Verwyder uit RAID"
+msgid "Swap"
+msgstr "Ruilarea"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "Voeg by LVM"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Konnekteer aan die internet"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "Voeg by RAID"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Herstel vanaf lкer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Format"
-msgstr "Formatteer"
+msgid "TV card"
+msgstr "TV-kaaer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Gedetaileerde inligting"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Partisietabel Reddingspoging"
+msgid ", "
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
-"Sit 'n floppie in die aandrywer.\n"
-"Alle data op hierdie floppie sal verloor word."
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Waarskuwing"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Verwyder tou"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"POstfix is 'n E-posoordragagent (MTA). Dit is die program wat E-pos\n"
+"van een bediener na 'n ander oordra."
+
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Select file"
-msgstr "Selekteer lOer"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
 msgstr ""
-"Die rugsteunpartisietabel het nie dieselfde grootte nie\n"
-"Wil u voortgaan?"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Verwyderbare media"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Reddingspartisietabel"
+msgid "Network Hotplugging"
+msgstr "Netwerkkonfigurasie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Reddingspartisietabel"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Reddingspartisietabel"
+msgid "Restore From CD"
+msgstr "Herstel vanaf floppie"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Skryf partisietabel"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Om meer partisies te verkry, verwyder asb. een om 'n ektensiepartisiete kan "
-"skep"
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "Ek kan nie meer partisies byvoeg nie"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Alle primкre partisies is gebruik"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Hard drive information"
-msgstr "Hardeskyfinligting"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Outo-allokeer"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Internetkonneksiedeling is gedeaktiveer"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Clear all"
-msgstr "Verwydeer almal"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Wil u die /etc/fstab veranderinge stoor?"
+msgid "Latin American"
+msgstr "Latyns-Amerikaans"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Stel netwerk op"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Verlaat, maar moenie iets stoor nie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Selekteer lOer"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Wil u in elk geval voortgaan?"
+msgid "Info: "
+msgstr "Info:"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Skakel oor na kundige gebruiksvlak"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Opsies: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Skakel oor na normale gebruiksvlak"
+msgid "Please wait"
+msgstr "Wag asb."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Undo"
-msgstr "Herroep"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "Verlaat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Klaar"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose a partition"
-msgstr "Kies 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Is dit korrek?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose another partition"
-msgstr "Kies 'n ander partisie"
+msgid "Ethernet Card"
+msgstr "Ethernetkaart"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Change type"
-msgstr "Verander tipe"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS bediener"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS-domein"
+msgid "Info"
+msgstr "Info"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username"
-msgstr "Gebruikerskode"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Installasie"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
 msgstr ""
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Magtiging"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Internet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Gebruikerskode"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Verlaay installasie"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Verwyder CUPS-bediener"
 
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Muis"
 
-#: ../../harddrake/data.pm:1
+#
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
 msgstr ""
+"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
+"\n"
+"%s\n"
+"\n"
+"Ek gaan nou u LAN met daardie kaart opstel."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Minimal install"
+msgstr "Minimale installasie"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estoniaans"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "Totale grootte: %d / %d MB"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Scanner"
-msgstr "Selekteer 'n videokaart"
+msgid "disabled"
+msgstr "deaktiveer"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generies"
+msgid "Search for new scanners"
+msgstr "Plaaslike drukker"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Disabling servers..."
+msgstr "Bedieners word gedeaktiveer..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Modem"
-msgstr "Muis"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernetkaart"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Processors"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Webcam"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Klankkaart"
+msgid "Network printer (TCP/Socket)"
+msgstr "Netwerkdrukker (sok)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Ander"
+msgid "Backup User files..."
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV-kaaer"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Installeer stelsel"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Videomodus"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Eerste DNS-bediener (opsioneel)"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Tape"
-msgstr "Tipe"
+msgid "dhcpd Config..."
+msgstr "Konfigurasie in aabou..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grub installasie"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "CDROM"
-msgstr ""
+msgid "Israeli"
+msgstr "Israelies"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Disk"
-msgstr "Deens"
+msgid "load setting"
+msgstr "Formatering"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Netwerk op pad af"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Floppy"
-msgstr "Stoor op floppie"
+msgid "Truly minimal install"
+msgstr "Minimale installasie"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Let me pick any driver"
+msgid "Denmark"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "Partisie word verskuif..."
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Driver:"
-msgstr "Drywer"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS-bediener IP:"
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "Toets konfigurasie"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "Installeer pakket %s"
 
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Unkown driver"
-msgstr "Onbekende model"
+msgid "Andorra"
+msgstr "Herroep"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
+msgid "Sierra Leone"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Botswana"
+msgstr "Estoniaans"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Verstek)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Alternative test page (Letter)"
+msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Kies 'n X-bediener"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "No open source driver"
+msgid "Swap partition size in MB: "
+msgstr "Ruilpartisiegrootte in MB: "
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "Korrupte rugsteunlкer"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Wag asb... Konfigurasie word toegpas"
+msgid "Formatted\n"
+msgstr "Geformateer\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Kies pakket om te installeer"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
 "\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"- Daemon (%s) include:\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Trouble shooting"
+msgid "%d comma separated numbers"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
 msgstr ""
+"Die 'rusers' protokol laat netwerkgebruikers toe om te bepaal wie\n"
+"aangeteken is op ander samewerkende rekenaars."
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Outomatiese Stappe Konfigurasie"
+
+#: ../../share/advertising/02-community.pl:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "Barbados"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Konfigurasie"
+msgid "Please select data to backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "No alternative driver"
+msgid "received"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "enable radio support"
-msgstr ""
+msgid "/File/_New"
+msgstr "/Lкer/_Nuut"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "CUPS-bediener IP:"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Radio support:"
+msgid "IP Range End:"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "Formatering"
+#: ../../security/level.pm:1
+#, c-format
+msgid "High"
+msgstr "Hoog"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "NoVideo"
+msgstr "Geen video"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Number of capture buffers:"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Verander tipe"
+msgid "Local Printers"
+msgstr "Plaaslike drukker"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kaartgeheue (DMA)"
+msgid "Installation image directory"
+msgstr "Xpmac (installasievertoondrywer)"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS-bediener"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generies"
+msgid "Port: %s"
+msgstr "Poort"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "Spaans"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Hierdie genruikerskode bestaan alreeds"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "Choose a file"
+msgstr "Kies 'n lкer"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "Pas toe"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Auto-detect"
+msgid "Auto-detect available ports"
 msgstr "Gebruik outobespeuring"
 
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Internetkonneksiedeling is gesper"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "San Marino"
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Do"
-msgstr "Klaar"
+msgid "Belgium"
+msgstr "Belgies"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "Verlaat"
+
+#
+#: ../../any.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Choose the window manager to run:"
+msgstr "Kies die vensterbestuurder om te loop:"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "Swak keuse, probeer weer\n"
+msgid "sub generation of the cpu"
+msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Re-submit"
+msgid "First Time Wizard"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
+"'n Fout het plaasgevind en ek weet nie hoe om dit veilig te hanteer\n"
+"nie. Gaan op u eie risiko voort."
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "please wait, parsing file: %s"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "Latvies"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Pakistan"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "U keuse? (verstek %s) "
+msgid "Permissions"
+msgstr "Weergawe: %s\n"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid " enter `void' for void entry"
+msgid "Provider name (ex provider.net)"
+msgstr "Voorsienernaam (bv voorsiener.co.za)"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Version: %s\n"
+msgstr "Weergawe: %s\n"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
+"U stelsel het min hulpbronne beskikbaar. U mag dalk probleme ondervind met "
+"die installering\n"
+"van Mandrake Linux. In so 'n geval probeer eerder die teksinstallasie. "
+"Daarvoor moet u\n"
+"'F1' druk wanneer u vanaf die CDROM herlaai en dan 'text' op die "
+"instruksielyn intik."
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use the Windows partition for loopback"
+msgstr "Gebruik vir die Windows-partisie vir teruglus"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (typewriter)"
+msgstr "Armenies (tikmasjien)"
+
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Connection type: "
+msgstr "Konneksietipe:"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Wil u aboot gebruik?"
+msgid "Graphical interface"
+msgstr "X met herlaai"
 
-#: ../../interactive/stdio.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s met 3D-hardwareversnelling"
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Opsies: %s"
+msgid "India"
+msgstr "Iranies"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "U keuse? (verstek %s) "
+msgid "Slovakia"
+msgstr "Sloveens"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Singapore"
 msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Cambodia"
 msgstr ""
-"Laai van module %s het gefaal.\n"
-"Wil u ander parameters probeer?"
 
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Specify options"
-msgstr "Spesifieer opsies"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitor HoriSink: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Aftas"
+msgid "Path"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
-"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
-"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
-"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
-"ophang, maar dit sal nie skade veroorsaak nie."
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "Watter %s drywer meot ek probeer?"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Drukker %s: %s %s\n"
+"Wil u hierdie drukker verander?"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Voeg gebruiker by"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
-"U kan noue die opsies voorsien vir module %s.\n"
-"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
-"Bv. ``io=0x300 irq-7''"
 
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "(module %s)"
-msgstr "(module %s)"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Kies asb. die laai of stoor pakketkeuse op die floppie.\n"
+"Die formaat is dieselfde as outoinstallasie-genereerde floppies."
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Drywer vir %s kaart %s in installasieproses"
+msgid "China (broadcast)"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Sien hardeware inligting"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use quota for backup files."
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Konfigureer drukker"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Het u enige %s koppelvlakke?"
+msgid "Internet connection"
+msgstr "Internetkonneksie"
 
 #: ../../modules/interactive.pm:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "Beskik u oor nog?"
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"Laai van module %s het gefaal.\n"
+"Wil u ander parameters probeer?"
 
-#: ../../modules/interactive.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Het %s %s koppelvlakke gevind"
+msgid "Welcome to the Open Source world."
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Bosnia and Herzegovina"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Formateer partisies"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr "U benodig 'n ware lкerstelsel (ext2, reiserfs) vir hierdie hegpunt\n"
 
-#: ../../modules/parameters.pm:1
+#
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Toets asb. die muis"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "comma separated numbers"
+msgid "Netherlands"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Stoor in lкer"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "%d comma separated strings"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "Interne ISDN-kaart"
 
-#: ../../modules/parameters.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "a number"
-msgstr "Telefoonnommer"
+msgid "Title"
+msgstr "Tabel"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Install & convert Fonts"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "WARNING"
 msgstr ""
-"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
-"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
-"Indien u nie weet nie, kies 'gebruik pppoe'."
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Konnekteer aan die internet"
-
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+msgid "Installing bootloader"
+msgstr "Herlaaistelselinstallasie"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "speedtouch USB"
+msgid "replay"
+msgstr "Herspeel"
 
-#: ../../network/adsl.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "use dhcp"
-msgstr "gebruik dhcp"
+msgid "detected %s"
+msgstr "%s bespeur"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "gebruik pptp"
+msgid "Virgin Islands (U.S.)"
+msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "gebruik pppoe"
+msgid "Bad backup file"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Other ports"
-msgstr "Toets poorte"
+msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
+"Dis tans gedeaktiveer.\n"
+"\n"
+"Wat wil u doen?"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Everything (no firewall)"
+msgid "Enter IP address and port of the host whose printers you want to use."
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Pipe into command"
+msgstr "Pyk drukstuk na program"
+
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
 msgstr ""
+"Sekere hardeware op u rekenaar benodig geslote drywers.\n"
+" U kan inligting hieroorvind by %s"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "Detecting devices..."
+msgstr "Toestel word afgetas..."
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Click here to launch the wizard ->"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Haiti"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"drakfirewall configurator\n"
+"Description of the fields:\n"
 "\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "the name of the CPU"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No network card"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Refreshing printer data..."
+msgstr "Drukkerdata word gelees..."
 
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "LDAP-bediener"
+#: ../../install2.pm:1
+#, c-format
+msgid "You must also format %s"
+msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Be careful: this operation is dangerous."
+msgstr "Wees versigtig: hierdie is 'n gevaarlike operasie"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "Sit 'n floppie met die pakketkeuse in aandrywer "
+
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Datbasis"
+msgid "Server: "
+msgstr "Bediener"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Domeinnaam"
+msgid "Security Alerts:"
+msgstr "Sekuriteitsvlak word gestel."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Web Server"
-msgstr "Bediener"
+msgid "Sweden"
+msgstr "Sien"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Use Expect for SSH"
 msgstr ""
 
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Poland"
+msgstr "Yslandies"
+
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Host name"
-msgstr "Rekenaarnaam"
+msgid "Importance: %s\n"
+msgstr "Belangrikheid: %s\n"
 
-#
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Rekenaarnaam"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "Toets poorte"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Configuring network"
-msgstr "Stel netwerk op"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
 
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+msgid "SMBus controllers"
+msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Kies die netwerkkoppelvlak"
+msgid "Connection timeout (in sec)"
+msgstr "Konneksie tydlimiet (in sekondes)"
 
-#: ../../network/ethernet.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie.\n"
-"Ek kan nie hierdie konneksietipe opstel nie."
 
-#: ../../network/ethernet.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Watter DCHP-kliлnt wil u gebruik?\n"
-"Verstek is dhcp-client"
+msgid "Croatian"
+msgstr "Kroaties"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Gebruik bestaande partisies"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Kon nie vurk nie: %s"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
+msgid "/Help/_About..."
+msgstr "/Help/_Aangaande..."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Remove user directories before restore."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
-"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
-"PCI-kaart op die volgende skerm."
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Wat is u ISDN-kaart?"
+msgid "CUPS printer configuration"
+msgstr "Verander drukkerkonfigurasie"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN Konfigurasie"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Abort"
-msgstr "Aborteer"
+msgid "F00f bug"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Continue"
-msgstr "Gaan voort"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/isdn.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
 msgstr ""
-"\n"
-"Indien u 'n ISA-kaart het, behoort die waardes op die volgende skerm reg te "
-"wees.\n"
-"\n"
-"Indien u 'n PCMCIA kaart het, moet u die IRQ en I/O van u kaart weet.\n"
+"Watter DCHP-kliлnt wil u gebruik?\n"
+"Verstek is dhcp-client"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "Ek weet nie"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Domain Name:"
+msgstr "Domeinnaam"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Stoor op floppie"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "Herstel vanaf lкer"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Oor watter tipe kaart beskik u?"
+msgid "Looking for available packages..."
+msgstr "Soek vir beskikbare pakkette"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr ""
+msgid "Init Message"
+msgstr "Beginboodskap"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Watter protokol verlang u?"
+msgid "Rescue partition table"
+msgstr "Reddingspartisietabel"
 
-#
-#: ../../network/isdn.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Konneksiespoed"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Protokol vir die res van die wкreld"
+msgid "Cyprus"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "Remove from RAID"
+msgstr "Verwyder uit RAID"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr ""
-"Protokol vir die res vd wкreld \n"
-" geen D-Kanaal nie (bruikhuurlyne)"
+"Hierdie wagwoord is te eenvoudig. Dit moet ten minste %d karakters bevat."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "European protocol"
-msgstr "Europese protokol"
+msgid "Configuration Wizards"
+msgstr "Netwerkkonfigurasie-assistent"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Europese protokol (EDSS1)"
+msgid "ISDN connection"
+msgstr "ISDN konneksie"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
 msgstr ""
-"Kies u internetdiensvoorsiener.\n"
-"Indien nie in die lys nie kies Ongelys"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "Eksterne ISDN-kaart"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Interne ISDN-kaart"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"U kan nou dienste kies wat by herlaaityd moet afskop.\n"
+"Wanneer u die muis oor 'n item beweeg, sal 'n klein ballon opspring\n"
+"wat die rol van die diens verduidelik.\n"
+"\n"
+"Wees versigtig met hierdie stap. Indien u beplan om diй rekenaar as 'n\n"
+"bediener te gebruik wil u nie dienste afskop wat u nie gaan gebruik nie."
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Watter tipe is u ISDN-konneksie?"
+msgid "Skip"
+msgstr "Mis hierdie stap"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niue"
+msgstr "Geen video"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Aktiveer/Deaktiveer all netwerkkoppelvlakke wat opgestel is om by\n"
+"herlaaityf te begin."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Ou konfigurasie (isdn4net)"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Nuwe konfigurasie (Ligte ISDN/isdn-light)"
+msgid "important"
+msgstr "belangrik"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
+msgid "Total Progress"
+msgstr ""
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Which ISDN configuration do you prefer?\n"
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"We recommand the light configuration.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
 msgstr ""
+"DrakX sal probeer om vir PCI SCSI-kaarte te soek.\n"
+"Indien DrakX 'n SCSI-kaart bespeur en weet watter drywer omte gebruik sal "
+"dit outomaties installeer word.\n"
+"\n"
+"Indien u nie oor 'n SCSI-kaart, beskik nie of  oor  'n ISA SCSI-kaart of 'n "
+"PCI SCSI-kaart beskik wat DrakX nie kan herken nie, sal u gevra word of daar "
+"enige SCSI-kaarte in diestelsel is. Indien daar geen is nie kliek op 'Nee', "
+"andersins op 'Ja'. U sal dan uit'n drywerlys kan kies.\n"
+"\n"
+"\n"
+"Indien u self 'n drywer moes spesifiseer, sal DrakX u ook vra vir enige "
+"spesifiekeopsies.\n"
+"U kan egter DrakX toelaat om self die hardeware te ondervra. DIt werk "
+"gewoonlik die beste.\n"
+"\n"
+"Lees die installasie inligting hoe om hierdie tipe inligting m.b.v. die "
+"Windows-bedryfstelsel te bekom.\n"
+"U kan dit ook vanaf die internet onttrek indien u sulke toegang het."
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Do nothing"
-msgstr "CUPS word gelaai"
+msgid "Users"
+msgstr "Gebruikerskode"
 
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Installasie"
+msgid "Aruba"
+msgstr "Grub"
 
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr ""
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Tabel"
+msgid "Preparing bootloader..."
+msgstr "Herlaaistelsel word voorberei"
 
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+msgid "Gateway (e.g. %s)"
 msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Tweede DNS-bediener (opsioneel)"
+msgid "The passwords do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "First DNS Server (optional)"
-msgstr "Eerste DNS-bediener (opsioneel)"
+msgid "Examples for correct IPs:\n"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Domain name"
-msgstr "Domeinnaam"
+msgid "Frequency (MHz)"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
+msgstr ""
+"Om hierdie gestoorde pakketkeuse te gebruik, herlaai die installasie met "
+"\"linux defcfg=floppy\""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Script-based"
-msgstr "Skriptipe"
+msgid "the number of the processor"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Terminaaltipe"
+msgid "Hardware clock set to GMT"
+msgstr "Hardewareklok gestel vir GMT"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "PAP"
-msgstr "PAP"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "Regte naam"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Login ID"
-msgstr "Aantekenkode"
+msgid "Change Cd-Rom"
+msgstr "Verander CDROM"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Telefoonnommer"
+msgid "Paraguay"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Connection name"
-msgstr "Konneksienaam"
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Dialup options"
-msgstr "Opbelopsies"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid "force"
+msgstr "forseer"
 
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Network Configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Exit"
+msgstr "Verlaat"
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
-"Nadat dit klaar is, sal dit beter wes om u X-omgewing te herlaai\n"
-"om die rekenaarnaamveranderingprobleem te voorkom."
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
-"\n"
-"Die kongiurasie gaan op u stelsel toegepas word.\n"
+msgid "Estonian"
+msgstr "Estoniaans"
 
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
 msgstr ""
-"Daar was 'n probleem met die herlaai van die netwerk.\n"
-"\n"
-"%s"
+"Apache is 'n WWW-bediener.\n"
+"Dit kan HTML-lкers uitstuur en CGI's hanteer"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Hierdie pakket moet opgradeer word\n"
-"Is u seker u wil dit deselekteer?"
+msgid "Add/Del Clients"
+msgstr "DHCP-Kliлnt"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Network configuration"
-msgstr "Netwerkkonfigurasie"
+msgid "Choose the network interface"
+msgstr "Kies die netwerkkoppelvlak"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Unknown Model"
+msgstr "Onbekende model"
 
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Internet connection"
-msgstr "Internetkonneksie"
+msgid "CD/DVD burners"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
 msgstr ""
-"U het meer as een internetkonneksiemetode opgste.\n"
-"Kies die een wat u verlang.\n"
-"\n"
+"Verstekpartisie vir herlaai\n"
+"  (vir MS_DOS doeleindes, nie LILO s'n nie)\n"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Kies die konneksie wat u wil konfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Kies 'n lкer"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet kaart(e) bespeur"
+msgid "Firewalling configuration detected!"
+msgstr "Vuurmuurkonfigurasie gevind!"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN connection"
-msgstr "LAN konneksie"
+msgid "Connection name"
+msgstr "Konneksienaam"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "cable connection detected"
-msgstr "Kabelkonneksie bespeur"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Cable connection"
-msgstr "Kabelkonneksie"
+msgid "Updating package selection"
+msgstr "Pakketseleksie word opgedateer"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "detected"
-msgstr "%s bespeur"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Waar wil u terugluslкer %s heg?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "ADSL connection"
-msgstr "ADSL konneksie"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
+"Die floppie is sukselvol geskep.\n"
+"U kan nou weer 'n installasie uitspeel."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 knoppies"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "detected %s"
-msgstr "%s bespeur"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ISDN connection"
-msgstr "ISDN konneksie"
+msgid "Replay"
+msgstr "Herspeel"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup other files"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "detected on port %s"
-msgstr "Op poort %s bespeur"
+msgid "No floppy drive available"
+msgstr "Geen sagteskyaandrywer beskikbaar nie"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Normale modemkonneksie"
+msgid "Backup files are corrupted"
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Toestel word afgetas..."
+msgid "TV norm:"
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Kundige bedryfsvlak"
+msgid "Cpuid family"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Gebruik outobespeuring"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Kies die profiel om te konfigureer"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lituanies AZERTY (nuut)"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
 msgstr ""
-"Welkom by die Netwerkkonfigurasie-assistent\n"
-"\n"
-"Ons gaan nou u internet/netwerkkonneksie konfigureer.\n"
-"Iniden u nie outobespeuring verlang nie, deselekteer die opsie.\n"
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
 msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
 msgstr ""
-"Omdat u  netwerk installasie doen, is u netwerk aslreeds opgestel.\n"
-"Kliek op OK om hierdee konfigurasie te behou, of op Kanselleer om u Internet "
-"& Netwerkkonneksie te herkonfigureer.\n"
+"U het 'n sagteware RAID-partisie as wortel (/).\n"
+"Geen herlaaistelsel sal dit kan hanteer sonder 'n /boot partisie nie.\n"
+"Onthou om 'n /boot by te voeg."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Previous"
+msgstr "<- Vorige"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "Ander bedryfstelsel (MacOS...)"
+
+#
+#: ../../mouse.pm:1
+#, c-format
+msgid "To activate the mouse,"
+msgstr "Om die muis te aktiveer"
+
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing up the network"
+msgstr "Netwerk op pad op"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
 "\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
 "\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
 "\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
 "\n"
-"Press OK to continue."
-msgstr ""
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
 "\n"
-"Ons gan nou die %s konneksie konfigureer.\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
 "\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
 "\n"
-"Drk OK om voort te gaan."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Ons gaan nou die %s konneksie herkonfigureer."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Internetkonneksie en konfigurasie"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Stel netwerk op"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Disconnect"
-msgstr "Diskonnekteer"
+msgid "Tanzania"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Connect"
-msgstr "Konnekteer"
+msgid "Computing FAT filesystem bounds"
+msgstr "FAT lкerstelselgrense word bereken"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"You can reconfigure your connection."
+"Backup Sources: \n"
 msgstr ""
-"\n"
-"U kan u konneksie herkonfigureer."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "Content of the file"
 msgstr ""
-"\n"
-"U kan aan die internet konnekter of u konneksie herkonfigureer."
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "U is nie tans aan die internet gekonnekteer nie."
+msgid "Authentication LDAP"
+msgstr "LDAP-magtiging"
 
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+msgid "Let me pick any driver"
 msgstr ""
-"\n"
-"U kan diskonnekteer or herkonfigureer."
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "U is tans aan die internet gekonnekteer."
-
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Instaanbediener moet begin met http://"
+msgid "Profile "
+msgstr "Profiel:"
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Instaanbediener moet begin met http://"
+msgid "transmitted"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "FTP proxy"
-msgstr "FTP instaanbediener"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Stoor pakketseleksie"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP instaanbediener"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "Instaanbedienerkonfigurasie"
+msgid "%d comma separated strings"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Here is the full list of keyboards available"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Theme name"
+msgstr "Drukkernaam:"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Gateway device"
-msgstr "Netwerkportaaltoestel"
+msgid "/_Help"
+msgstr "/_Help"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS bediener"
+msgid "the width of the progress bar"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Cook Islands"
 msgstr ""
-"Tik asb die rekenaarnaam in.\n"
-"Dit moet 'n volle gekwalifiseerde naam wees,\n"
-"bv. ``myne.mywerk.co.za''.\n"
-"U mag ook die netwerkhek byvoeg indien daar een is"
 
-#: ../../network/network.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "Formatting partition %s"
+msgstr "Partisie %s word formateer"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Bedienernaam:"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Unselect fonts installed"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+msgid "Cancel"
+msgstr "Kanselleer"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Gelaai tydens herlaaityd"
+msgid "Searching for configured scanners ..."
+msgstr "Plaaslike drukker"
 
 #
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Toets asb. die muis"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "Wiel"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Netwerkkonfigurasie"
+msgid "Videocard"
+msgstr "Videomodus"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
 
-#
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Rekenaarnaam"
+msgid "Remove Selected"
+msgstr "Verwyder tou"
 
-#
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmasker"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Gebruik outobespeuring"
 
 #
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address"
-msgstr "IP adres"
+msgid "Remove printer"
+msgstr "Verwyder drukker"
 
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Automatic IP"
-msgstr "Outomatiese IP"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr "(drywer %s)"
-
-#: ../../network/network.pm:1
-#, c-format
-msgid "Configuring network device %s"
-msgstr "Konfigureer netwerktoestel %s"
-
-#: ../../network/network.pm:1
-#, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
 msgstr ""
-"Gee asb die IP-konfigurasie vir hierdie rekenaar.\n"
-"Elke item moet as 'n IP-adres in dotdesimalenotasie\n"
-"(1.2.3.4) gegee word."
+"WAARSKUWING\n"
+"\n"
+"DrakX moet nou u WIndowspartisie se grootte verander. Hierdie operasie\n"
+"IS GEVAARLIK. Indien u nie alreeds so gemaak het nie, moet u hierdie "
+"installasie\n"
+"verlaat, scandisk onder Windows loop en dalk ook defrag. Dan kan u terugkeer "
+"na\n"
+"hierdie installasie. Rugstuen ook u data. Insien u skeer is van u saak, kies "
+"OK."
 
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
 msgstr ""
-"WAARSKUWING: Die toestel is alreeds opgestel om aan die internette "
-"konnekteer.\n"
-"U kan die toestel net so aanvaar.\n"
-"Veranderinge aan onderstaande velde sal hierdie konfigurasie oorskryf."
 
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
 msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
-"Waarskuwing! 'n Bestaande vuurmuurkonfigurasie is bespeur. U sal dalk na "
-"dietyd self regstellings moet aanbring."
+"Welkom by die proksiekonfigurasienutsprogram.\n"
+"\n"
+"Hier kan u die HTTP en FTP-instaanbedieners\n"
+"opstel met of sonder aantekenkodes en wagwoorde\n"
 
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Vuurmuurkonfigurasie gevind!"
+msgid "Other"
+msgstr "Ander"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "Wagwoord"
+msgid "Default"
+msgstr "Verstek"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Gebruikerskode"
+msgid "Button 2 Emulation"
+msgstr "Knop-2 Emulasie"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Konneksie tydlimiet (in sekondes)"
+msgid "type1inst building"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Connection speed"
-msgstr "Konneksiespoed"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Abiword"
+msgstr "Aborteer"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Kies 'n lкer"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Belmetode"
+msgid "X server"
+msgstr "X-bediener"
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Domain Admin User Name"
+msgstr "Domeinnaam"
+
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "There was an error while scanning for TV channels"
+msgstr "Daar was 'n fout met die installasie van die pakkette:"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose your country"
-msgstr "Kies u land"
+msgid "US keyboard (international)"
+msgstr "VSA internasionale sleutelbord"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "Verlaay installasie"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Voorsiener DNS 2 (opsioneel)"
+msgid "LAN connection"
+msgstr "LAN konneksie"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Voorsiener DNS 1 (opsioneel)"
+msgid "/File/-"
+msgstr "/Lкer/-"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Voorsiener se telefoonnommer"
+msgid "Italian"
+msgstr "Italiaans"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Voorsienernaam (bv voorsiener.co.za)"
+msgid "Basic"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "U persoonlike telefoonnommer"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Kaart IO_1"
+msgid "Honduras"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Kaart IO_0"
+msgid "pdq"
+msgstr ""
 
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Card IO"
 msgstr "Kaart I/O"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Kaartgeheue (DMA)"
+msgid "when checked, owner and group won't be changed"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "Kaart IRQ"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Hierdie spesiale herlaaipartisie\n"
+"is om u stelsel te duolaai.\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "Vul asb. die velde hieronder in"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
 
-#
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Konneksiekonfigurasie"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
 msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
-"Die tselsel blyk nie aan die internet gekonnekteer te wees nie.\n"
-"Probeer om u stelsel te herkonfigureer."
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Russue (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Vir sekuriteitsredes, word u nou gediskonnekteer."
+msgid "You must enter a device or file name!"
+msgstr "Tik  drukkertoestel URI in"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Die stelsel is nou aan die internet gekonnekteer."
+msgid "/_Quit"
+msgstr "Verlaat"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Konneksie word getoets..."
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Wil u nou aan die internet konnekteer?"
+msgid "Graphics memory: %s kB\n"
+msgstr "Video geheue: %s kB\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Internetkonfigurasie"
-
-#: ../../partition_table/raw.pm:1
-#, fuzzy, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
-"Iets vrots gebeur op u hardeskyf.\n"
-"'n Dataintegriteitstoets het misluk.\n"
-"Dit beteken dat enigiets wat na u hardeskyf geskryf word as gemors sal "
-"eindig."
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (Verstek)"
-
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS-bediener IP:"
+msgid "access to compilation tools"
+msgstr ""
 
-#
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Eksterne drukker"
+msgid "Please select data to restore..."
+msgstr "Kies asb. 'n taal om te gebruik."
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Indien u beplan om 'aboot' te gebruik, los spasie aan die begin\n"
+"van die skyf. (2048 sektors is genoeg)."
 
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(op hierdie rekenaar)"
+msgid "Standard test page"
+msgstr "Standaard toetsbladsy"
 
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "(on %s)"
-msgstr "(op %s)"
+msgid "Create"
+msgstr "Skep"
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "What"
+msgstr "Wag"
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "There was an error ordering packages:"
+msgstr "Daar was 'n fout met pakkette:"
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - Nuwe generasie LPR"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (BDS)"
+msgstr "Bulgaars"
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPD"
-msgstr "LPD"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "Datbasis"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "LOerstelseltipe: "
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Lyndrukkerdiensprogram"
+msgid "Gujarati"
+msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "Installeer stelsel"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "Werkgroep:"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Druk sonder drukkertou"
+msgid "Brazil"
+msgstr ""
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Unknown Model"
-msgstr "Onbekende model"
+msgid "Auto Install"
+msgstr "Installasie"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Unknown model"
-msgstr "Onbekende model"
+msgid "Network Configuration Wizard"
+msgstr "Netwerkkonfigurasie-assistent"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Poort"
+msgid "Removable media automounting"
+msgstr "Verwyderbare media"
 
-#
-#: ../../printer/main.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Host %s"
-msgstr "Rekenaarnaam"
+msgid "Printing"
+msgstr "Druk"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Network %s"
-msgstr "Netwerkkoppelvlak"
+msgid "Unkown driver"
+msgstr "Onbekende model"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create a new partition"
+msgstr "Kies 'n nuwe grootte"
+
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Koppelvlak %s"
+msgid "Driver:"
+msgstr "Drywer"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "geen netwerkkaart gevind nie"
+msgid "unknown"
+msgstr "Onbekende model"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "Use fdisk"
+msgstr "Gebruik fdisk"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "BEWEEG DIE WIEL!"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid "sent: "
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr ""
+msgid "Automatic IP"
+msgstr "Outomatiese IP"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Fout in die skryf van %s"
+msgid "Configuration of a remote printer"
+msgstr "Konfigureer drukker"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", multi-function device"
+msgid "Moldova"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../printer/main.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid ", multi-function device on USB"
+msgid "An online platform to respond to enterprise support needs."
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Instaanbediener moet begin met http://"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Geen drukker"
+msgid "Add a new rule at the end"
+msgstr "Voeg drukker by"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
 msgstr ""
+"U kan noue die opsies voorsien vir module %s.\n"
+"Opsies is in die formaat ``naam=waarde naam2=waarde2 ...''.\n"
+"Bv. ``io=0x300 irq-7''"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Pipe job into a command"
-msgstr "Pyk drukstuk na program"
+msgid "Quit without writing the partition table?"
+msgstr "Wil u verlaat, sonder om die partisietabel op te dateer?"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "Tik  drukkertoestel URI in"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on NetWare server"
-msgstr "Eksterne Netware-drukker"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "Installing packages..."
+msgstr "Installeer pakket %s"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Dutch"
+msgstr "Nederlands"
 
 #
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Netwerkdrukker (sok)"
+msgid "The following packages need to be installed:\n"
+msgstr "Die volgende pakkette gaan installeer word"
 
-#
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Eksterne LPD-drukker"
+msgid "Angola"
+msgstr ""
 
-#
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Eksterne CUPS-drukker"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "service setting"
+msgstr "interessant"
 
 #
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Remote printer"
-msgstr "Eksterne drukker"
-
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Konfigureer drukker"
+msgid "Custom"
+msgstr "Aangepaste"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Drukker"
+msgid "File is already used by another loopback, choose another one"
+msgstr "Lкer word alreeds deur 'n ander teruglus gebruik,kies 'n ander een"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Read-only"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Wil u die werklik die drukker verwyder?"
+msgid "Latvia"
+msgstr "Latvies"
 
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Remove printer"
-msgstr "Verwyder drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Wil u die konfigurasie toets?"
+msgid "No known driver"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Druk toetsbladsy(e)"
+msgid "1 MB"
+msgstr "1 MB"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "Stel plaaslike netwerk op..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Launch the sound system on your machine"
+msgstr "Laai die klankstelsel op u rekenaar"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#, fuzzy, c-format
+msgid "Preparing printer database..."
+msgstr "Drukkerdata word gelees..."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Information"
+msgstr "Vertoon inligting"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "No network card"
+msgstr "geen netwerkkaart gevind nie"
 
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Which filesystem do you want?"
+msgstr "Watter lкerstelsel verlang u?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Drukker \"%s\" is nou die verstekdrukker"
+msgid "3 buttons"
+msgstr "3 knoppies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default printer"
-msgstr "Verstek drukker"
+msgid "Detailed information"
+msgstr "Gedetaileerde inligting"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Maak hierdie die verstekdrukker"
+msgid "Malta"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Drukkeropsies"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr "Drukkervervaardiger, model"
+msgid "This floppy is not FAT formatted"
+msgstr "Hierdie floppie is nie in FAT-formaat nie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Drukkervervaardiger, model, drywer"
+msgid "Configuring network"
+msgstr "Stel netwerk op"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Drukkerdata word gelees..."
+msgid "Graphic Card"
+msgstr "Videokaart"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Drukkernaam,. beskrywing, ligging"
+msgid "Resizing Windows partition"
+msgstr "Windowslкerstelselgrense word bereken"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Drukkerkonneksietipe"
+msgid "Provider dns 1 (optional)"
+msgstr "Voorsiener DNS 1 (opsioneel)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "Geen drukker"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cameroon"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Gaan voort!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"U het nou partisie %s partisioneer.\n"
+"Wanneer u klaar is, stoor u veranderinge met 'w'."
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -9609,419 +9631,342 @@ msgstr "Gaan voort!"
 msgid "Close"
 msgstr "Sluit af"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"Drukker %s: %s %s\n"
-"Wil u hierdie drukker verander?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Modify printer configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Voeg drukker by"
+msgid "Calendar"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal Mode"
-msgstr "Normale modus"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Stel netwerk op"
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
+msgstr ""
+"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
+"van die drukkkerbediener en die naam van die drukkertou\n"
+"voorsien word."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Konfigurasie"
+msgid "Iceland"
+msgstr "Yslandies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "consolehelper missing"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "stopped"
+msgstr "onaktief"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Whether the FPU has an irq vector"
 msgstr ""
-"Hier is die bestaande drukkertoue.\n"
-"U kan byvoeg or verwyder soos nodig."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Printing system: "
-msgstr "Drukkerstelsel:"
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Installeerde sagteware word deursoek..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Konfigureer drukker"
+msgid "Expand Tree"
+msgstr "Maak boom oop"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Drukkerdata word gelees..."
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
 
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
+msgid "Expert Mode"
+msgstr "Kundige bedryfsvlak"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Kies drukkerspoelprogram"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Verstek drukker"
+msgid "Printer options"
+msgstr "Drukkeropsies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Installeer pakket %s"
+msgid "Local Network adress"
+msgstr "geen netwerkkaart gevind nie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "LPD word verwyder..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
 msgstr ""
 
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Watter drukkerstelsel verlang u?"
+msgid "Samba Server"
+msgstr "NIS-bediener"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "Australian Optus cable TV"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoпes"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "Hoog"
-
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
+" <Tab>/<Alt-Tab> tussen elemente  | <Space> selekteer | <F12> volgende skerm "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+msgid "Subnet:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Stel netwerk op"
+msgid "Zimbabwe"
+msgstr "moontlik"
 
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Toets asb. die muis"
 
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "When"
+msgstr "Wiel"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Konneksie word begin..."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Tweede DNS-bediener (opsioneel)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Drukkerdata word gelees..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Color depth: %s\n"
+msgstr "Kleurdiepte: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "%s word oorgedra..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "U kan nie hierdie pakket deselekteer nie. Dit moet opgradeer word."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Nuwe drukkernaam"
+msgid "Loading from floppy"
+msgstr "Oplaai vanaf floppie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transfer"
-msgstr "Oordrag"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Sloveens"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
 msgstr ""
+"Tik 'n gebruiker in\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Moet nie drukkers oordra nie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Drukkermodelkeuse"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
+"Hier is die huidige inskrywings\n"
+"U kan byvoeg or verwyder soos nodig."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
+"Loop instruksies deur 'at' geskeduleer op die tyd deur 'at' gespesifiseer. "
+"Loop ook instruksiebondels wanneer die stelsellas laag genoeg is."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Radio support:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+#, fuzzy, c-format
+msgid "Installing SANE packages..."
+msgstr "Installeer pakket %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "herlaaiskyfskepping"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Toetsbladsy(e) word gedruk..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Drukkeropsies"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Netwerk op pad af"
+msgid "LDAP"
+msgstr "KDAP"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Change type"
+msgstr "Verander tipe"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Netwerk op pad af"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO installasie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
+"Geluk, installasie is afgehandel.\n"
+"Verwyder die herlaaimedium en druk 'enter' om te herlaai.\n"
+"\n"
+"\n"
+"Vir lapinligting oor hierdie vrystelling vanMandrake Linux,\n"
+"bekyk die errata beskikbaar op\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Inligting oor stelskonfigurasie is beskikbaar in die postinstallasie-\n"
+"hoofstuk in die Offisiлle Liux-Mandrake Gebruikersgids."
 
 #: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Paranoпes"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Send mail report after each backup to:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10032,241 +9977,213 @@ msgid ""
 "because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Resolution"
+msgstr "Resolusie"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
+"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
+"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
+"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
+"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "reconfigure"
+msgstr "herkonfigureer"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
+"Hierdie kaart kan ondersteuning vir 3D-hardewareversnelling onder XFree86 %s "
+"bied,\n"
+"MAAR LET DAAROP DAT DIT EKSPERIMENTEEL IS EN DIE REKENAAR MAG VRIES."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "Drukkerbediener"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+msgid "access to network tools"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr "Het dit reg gewerk?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
-"Toetsbladsy(e) is na die drukker gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
+"Die 'aboot' installasie het gefaal. Wil u 'n installasie afwurg al\n"
+"word die eerste partisie vernietig?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
 "\n"
-msgstr ""
-"Toetsbladsy(e) is na die drukkerstelsel gestuur.\n"
-"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
-"Drukstatus:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
 "\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Druk toetsbladsy(e)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Fototoetsbladsy"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Alternatiewe toetsbladsy (A4)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Alternatiewe toetsbladsy (Lettergrootte)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "Verwyder tou"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Standard test page"
-msgstr "Standaard toetsbladsy"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Print"
-msgstr "Druk"
+msgid "Please fill or check the field below"
+msgstr "Vul asb. die velde hieronder in"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No test pages"
-msgstr "Geen toetsbladsye"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Wil u die /etc/fstab veranderinge stoor?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
+msgid "Boot Protocol"
+msgstr "Herlaaiprotokol"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Test pages"
-msgstr "Toetsbladsye"
+msgid "LVM-disks %s\n"
+msgstr "LVM-skywe %s\n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "The package %s is needed. Install it?"
 msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Option %s out of range!"
-msgstr "Opsie %s is buite bereik!"
+msgid "On boot"
+msgstr "met herlaai"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s must be a number!"
-msgstr "Opsie %s moet 'n nommer wees"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Bus identification"
+msgstr "Magtiging"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Opsie %s moet 'n heeltal wees!"
+msgid "Please make a backup of your data first"
+msgstr "Rugsteun u data eers asb."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
+msgid "Vatican"
+msgstr "Latvies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "U het meer as een hardeskyf, waar wil u Linux installeer?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Internetkonfigurasie"
+msgid "Eritrea"
+msgstr "Kundige area"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
+#
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Verwyder drukker"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Verander drukkerkonfigurasie"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+msgid "Inuktitut"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+msgid "Morocco"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10275,1456 +10192,1270 @@ msgid "Which printer model do you have?"
 msgstr "Oor watter tipe drukker beskik u?"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer model selection"
-msgstr "Drukkermodelkeuse"
-
-#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Drukkerdata word gelees..."
+msgid "Add a new printer"
+msgstr "Voeg drukker by"
 
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Eksterne drukkernaam"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "          All of your selected data have been          "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Is dit korrek?"
+msgid "<-- Delete"
+msgstr "Uitwis"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "Nepal"
 msgstr ""
 
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Eksterne drukkernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Drukkerdata word gelees..."
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Location"
-msgstr "Ligging"
+msgid "chunk size"
+msgstr "blokgrootte"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Description"
-msgstr "Beskrywing"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "instruksies voor herlaai, of 'c' vir 'n instruksielyn."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Name of printer"
-msgstr "Drukkernaam"
+msgid "Problems installing package %s"
+msgstr "Probleme met Installasue van pakket %s"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
 msgstr ""
-"Elke drukker benodig  naam (bv. lp).\n"
-"Die Beskrywing- en Liggingvelde is opsioneel.\n"
-"Hulle dien as inligting vir gebruikers."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Enter Printer Name and Comments"
+msgid ""
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Making printer port available for CUPS..."
+msgid "Add a scanner manually"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Reload partition table"
+msgstr "Reddingspartisietabel"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "The Local Network did not finish with `.0', bailing out."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Installeer pakket %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Installeer pakket %s"
+msgid "Boot"
+msgstr "Basis"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Installeer pakket %s"
+msgid "Tuner type:"
+msgstr "Verander tipe"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "A command line must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "Domeinnaam"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "\"Menu\" key"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Pipe into command"
-msgstr "Pyk drukstuk na program"
+msgid "Security Administrator:"
+msgstr "Eksterne lpd drukkeropsies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s bespeur"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A valid URI must be entered!"
-msgstr "'n Geldige URI moet verskaf word!"
+msgid "Please enter your login"
+msgstr "Probeer asb. weer"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "Drukkertoestel URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
-"U kan die URI om die drukker te bereik direk spesifiseer. Die URI moet in "
-"CUPS- of Foomatic-formaat wees. Nie alle UTI-tipes moet deur al die "
-"spoelprogramme ondersteun nie."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Poort"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Drukkerbedienernaam"
+msgid "Fonts copy"
+msgstr "Formatteer floppie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The port number should be an integer!"
-msgstr "Die poortnommer moet  heeltal wees."
+msgid "Automated"
+msgstr "Outomaties"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Drukkerbedienernaam ontbreek!"
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Wil u die konfigurasie toets?"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
-"Om aan 'n sokdrukker te konnekteer, moet u die rekenaarnaam van die\n"
-"drukker voorsien en dalk ook 'n poortnommer voorsien.\n"
-"Met HP JetDirect-bedieners is die poortnommer gewoonlik 9100,\n"
-"maar dit mag anders wees met ander bedieners. Raadpleeg die handleiding\n"
-"wat saam met die hardeware gekom het."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
+"\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
+"\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save packages selection"
+msgstr "Stoor pakketseleksie"
+
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Sokdrukkeropsies"
+msgid "Remove the last item"
+msgstr "Terugluslкer %s word geformateer"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Host \"%s\", port %s"
+msgid "User list to restore (only the most recent date per user is important)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ", host \"%s\", port %s"
+msgid "No net boot images created!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Konneksie word begin..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "NCP queue name missing!"
-msgstr "NCP-tounaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "NCP server name missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+msgid "use pptp"
+msgstr "gebruik pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Print Queue Name"
-msgstr "Drukkertounaam"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Kies watter dienste moet outomaties begin met herlaaityd."
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Drukkerbediener"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Wil u die konfigurasie toets?"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Om na 'n Netware drukker te druk moet u die volgende voorsien:\n"
-"Netware rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP\n"
-"rekenaarnaam nie); moontlik die IP adres van die drukkerbediener;\n"
-"die drukkernaam; toepaslike gebruikerskode en wagwoord."
+msgid "Configure the network now"
+msgstr "Stel netwerk op"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare drukkeropsies"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Kies 'n spieлl waar die pakkette verkry kan word"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
+"Die FAT-verstellingsprogram kan nie u partisie hanteer nie.\n"
+"Fout: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Which sector do you want to move it to?"
+msgstr "Na watter sektor wil u skuif?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "Wil u aboot gebruik?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
+msgid "Bahamas"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Samba share name missing!"
-msgstr "SAMBA-deelnaam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Уf die bedienernaam уf die bediener-IP moet verskaf word!"
-
-#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Gebruik outobespeuring"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Workgroup"
-msgstr "Werkgroep:"
+msgid "Manual configuration"
+msgstr "Kleurkonfigurasie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Share name"
-msgstr "Drukkernaam:"
+msgid "search"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "SMB server IP"
-msgstr "SMB-bediener IP:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Hierdie pakket laai die sleutelbordkaart soos dit in /etc/sysconfig/"
+"keyboard\n"
+"opgestel is. Dit kan vernader word met die kbdconfig nutsprogram. U moet "
+"dit\n"
+"op meeste rekenaars ongesper laat."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "SMB-bedienernaam"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (installasievertoondrywer)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-"Om na 'n SMB drukker te druk moet u die volgende voorsien:\n"
-"SMB rekenaarnaam (dis nie noodwendig dieselfde as die TCP/IP rekenaarnaam\n"
-"nie); moontlik die IP adres van die drukkerbediener; die drukkernaam; \n"
-"toepaslike gebruikerskode en wagwoord; werkgroepnaam."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) drukkeropsies"
+"Syslog is die fasiliteit wat baie diensprogramme gebruik om boodskappe\n"
+"te log na 'n verskeidenheid loglкers. Dit is altyd goed om syslog te loop."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Netwerk op pad af"
+msgid "Unknown/Others"
+msgstr "Generies"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "No TV Card detected!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote printer name missing!"
-msgstr "Eksterne drukkernam ontbreek!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Eksterne bedienernaam ontbreek!"
+msgid "Options"
+msgstr "Opsies"
 
-#
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Eksterne drukkernaam"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Drukker \"%s\" is nou die verstekdrukker"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote host name"
-msgstr "Eksterne bedienernaam"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
-"Om 'n eksterne lpd drukkertou te gebruik,moett die naam\n"
-"van die drukkkerbediener en die naam van die drukkertou\n"
-"voorsien word."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Eksterne lpd drukkeropsies"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Auto-detected"
+msgstr "Gebruik outobespeuring"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Tik  drukkertoestel URI in"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
+"Nou dat u internetkonfigurasie opgestel is,\n"
+"moet u die rekenaar opstel om dit te deel.\n"
+"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
+"stel.\n"
+"\n"
+"Wil u internetdeling opstel?\n"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+"Geen beskikbare 1MB herlaaipartisie nie! Installasie sal voortgaan, maar u "
+"sal  herlaaipartisie met DiskDrake moet skep indien u die stelsel wil "
+"herlaai."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Refuse"
+msgstr "Weier"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "HFS"
+msgstr "HFS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
 
 #
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Dei volgende pakkette gaan verwyder word"
+msgid "Remote Printers"
+msgstr "Eksterne drukker"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Lкer %s word geskep en formatteer"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "Plaaslike drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Plaaslike drukker"
+msgid "Choose an existing LVM to add to"
+msgstr "Kies 'n bestaande LVM om by toe te voeg"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Tik  drukkertoestel URI in"
+msgid "xfs restart"
+msgstr "beperk"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Plaaslike drukker"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "geen beskikbare partisies"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Geen drukker"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Drukkerbedienernaam"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Domain Name Resolver"
+msgstr "Domeinnaam"
 
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Netwerkdrukker (sok)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key (again)"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s bespeur"
+#, c-format
+msgid "Samba share name missing!"
+msgstr "SAMBA-deelnaam ontbreek!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "True Type install done"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
+msgid "Detection in progress"
+msgstr "Op poort %s bespeur"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Build Whole Kernel -->"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Welcome to %s"
+msgstr "Welkom by %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Sit asb. die module-opdateringsfloppie in aandrywer %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Bootsplash"
 msgstr ""
 
-#
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Eksterne drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Druk"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"In sekere gevalle sal die %s drywer ekstra inligting benodig, alhoewel in\n"
+"meeste gevalle dit nie nodig wees nie. Wil u ekstra opsies voorsien od moet\n"
+"rekenaar self daarvoor aftas. In uitsonderlike gevalle mag die rekenaar\n"
+"ophang, maar dit sal nie skade veroorsaak nie."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
 msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
 "\n"
+"%s\n"
 "\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid ")"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+"Click on Configure to launch the setup wizard."
+msgstr "Internetkonneksiedeling"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
+msgid "Cuba"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Konfigureer drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "Plaaslike drukker"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Verstel Grootte"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
+msgstr "Tydsbeperking vir stelselkernlaai"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"U videokaart kan slegs 3D-versnelling onder XFree %s ondersteun.\n"
+"DIt word wel onder XFree %s ondersteun wat dalk beter 2D-ondersteuning het."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Wil u die konneksie met herlaaityd aanskakel?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Die DrakX partisioneringsassistent het die volgende oplossings:"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr ""
-"Wil u hierdie drukker (\"%s\")\n"
-"die verstek drukker maak?"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Hungarian"
+msgstr "Hongaars"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"Kies u internetdiensvoorsiener.\n"
+"Indien nie in die lys nie kies Ongelys"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Outotydsinkronisasie met NTP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
+msgid "LDAP Server"
+msgstr "LDAP-bediener"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
+"PCMCIA is gewoonlik nodig om ondersteuning te verleen aan\n"
+"toestelle soos ethernet en modems in skootrekenaars. Dit sal nie\n"
+"gelaai word, behalwe as dit konfigureer is nie en dit is derhalwe\n"
+"veilig om op rekenaars te hк wat dit nie nodig het nie."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Choose your country"
+msgstr "Kies u land"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid ""
-"The following printers\n"
 "\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Voeg drukker by"
+"- System Files:\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Voeg drukker by"
+msgid "Standalone Tools"
+msgstr "Konsole hulpprogramme"
 
 #
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Watter drukkerstelsel verlang u?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Laai dit"
+msgid "Where"
+msgstr "Wiel"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Is dit korrek?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "NCP-bedienernaam ontbreek!"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Stel PCMCIA op..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu is weg"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
 msgstr ""
 
-#
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Eksterne CUPS-drukker"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Verwyder tou"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s bespeur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Voeg gebruiker by"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Installasie van herlaaiprogram het gefaal a.g.v. hierdie fout: "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Set this printer as the default"
+msgstr "Maak hierdie die verstekdrukker"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "partisie %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Paranoпes"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Host/network IP address missing."
+msgid "NIS"
+msgstr "NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
 msgstr "Plaaslike drukker"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Verwyder tou"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Wis hele skyf"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Verstek)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
 msgstr "Outomatiese CUPS konfigurasie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Stel netwerk op"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Klaar"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS-bediener IP:"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "No remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "permissions"
+msgstr "partisie %s"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Kleurkonfigurasie"
+#, c-format
+msgid "<- Previous"
+msgstr "<- Vorige"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Druk"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "Internetkonneksiedelingkonfigurasie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Skakel tussen plat- en groepsortering"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Opsies: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"U gebruik huidig %s as herlaaibestuurder.\n"
+"Kliek op Konfigureer om opstelassistent te laai."
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
 msgstr "Verander drukkerkonfigurasie"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"Bepaalde stappe is nie afgehandel nie.\n"
 "\n"
-"Met 'n eksterne CUPS-bediener, hoef u glad nie 'n drukker hier\n"
-"op te stel nie; drukkers wod outomaties bespeur.\n"
-"Indien u twyfel, kies \"Eksterne CUPS-drukker\"."
+"Wil u werklik nou aborteer?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Hoe is die drukker gekonekteer?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Kies drukkerkonneksie"
+msgid "Polish (qwertz layout)"
+msgstr "Pools (QWERTZ uitleg)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
 msgstr ""
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the user umask."
 msgstr ""
+"Welkom by %s die bedryfstelselkeuseprogram!\n"
+"\n"
+"Kies u bedryfstelsel uit die bogelyste opsies of wag\n"
+"%d sekonde vir die verstekopsie.\n"
+"\n"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portugees"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Teruglus lкernaam:"
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "seriaal"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Hierdie lкergids moet altyd in die wortellкerstelsel bly"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Installeer herlaaistelsel"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Kies die geheue grootte van u videokaart"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM naam?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Het %s %s koppelvlakke gevind"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Installasie"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Nuwe drukkernaam"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kaart IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "logdrake"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Kies die sagteskyfaandrywer wat u wil gebruik"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO met tekskieskaart"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Klaar"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Spieлl word gekontak vir die lys van pakkette"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lituanies AZERTY (oud)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brasiliaans (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO installasie"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Lкer/_Oopmaak"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Outoinstallasieskyf word geskep."
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "Hongaars"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Toetsbladsye"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Kleurkonfigurasie"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Wat is u muistoestel?"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "Switching from ext2 to ext3"
+msgstr "Oorskakeling van ext2 na ext3"
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "LPRng"
+msgstr "LPRng"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
 "\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Voeg drukker by"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Geen ISDN PCI-kaart gevind nie. Kies asb. een op die volgende skerm."
 
-#: ../../security/help.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "GB"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Gee asb. 'n gebruikerskode"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "Laat CD-herlaai toe?"
 
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normale modemkonneksie"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -11732,743 +11463,543 @@ msgstr ""
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Selekteer opsies vir bediener"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Nie genoeg ruilarea om die installasie te voltooi. Voeg asb. by."
 
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Security level"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "%s on %s"
+msgstr "Poort"
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Gebruik sekuriteitsvlak"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Opsies"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Wat is u tydsone?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Hierdie is Vlak-4 sekuriteit, maar die stelsel is afgeslote.\n"
-"Sekuriteitseienskappe is maksimaal."
+msgid "Guinea"
+msgstr "Algemeen"
 
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Met hierdie sekuriteitsvlak, kan die stelsel as 'n bediener gebruik word.\n"
-"Die sekuriteit is goed genoeg sodat 'n stelsel konneksies wat baie kliлnte\n"
-"af kan aanvaar."
+msgid "The system is now connected to the Internet."
+msgstr "Die stelsel is nou aan die internet gekonnekteer."
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
 msgstr ""
-"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
-"wat aan die internet as 'n kliлnt konnekteer. Daar is heelwat "
-"sekuriteitstoetse."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
 msgstr ""
-"Wagwoorde is nou ontsper, maar gebruik as 'n netwerkrekenaar word nie "
-"aanbeveel nie."
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
 msgstr ""
-"Hierdie vlak moet met sorg gebruik word. Dit maak 'n stelsel baie maklik\n"
-"om te gebruik, maar is baie sensitief. Dit moet nie gebruik vir 'n rekenaar\n"
-"wat aan ander rekenaars of die internet gekoppel is nie. Daar is geen "
-"wagwoord\n"
-"toegang nie."
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Paranoпes"
+msgid "Icon"
+msgstr "Ikoon"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Higher"
-msgstr "Hoog"
+msgid "Please choose what you want to backup"
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "High"
-msgstr "Hoog"
+msgid "256 colors (8 bits)"
+msgstr "256 kleure (8 bis)"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "Swak"
+msgid "Read-write"
+msgstr "Lees-skryf"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Krakers welkom"
+msgid "Size: %s\n"
+msgstr "Grootte: %s\n"
 
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Teken asb. weer in %s om veranderinge te aktiveer"
+msgid "Hostname: "
+msgstr "Bedienernaam:"
 
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Teken uit en gebruik dan Ctrl-Alt-Backspace"
+msgid "Chunk size %s\n"
+msgstr "Blokgrootte %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Geen sagteskyaandrywer beskikbaar nie"
-
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "ADSL konneksie"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Sit 'n herlaaiskyf wat gebruik is, in aandrywer %s"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Write Config"
-msgstr "herkonfigureer"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "Error!"
+msgstr "Fout!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "cable connection detected"
+msgstr "Kabelkonneksie bespeur"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IP Range End:"
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "IP Range Start:"
+msgid "/_Report Bug"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS-bediener"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "Verstel Grootte"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Domeinnaam"
+msgid "Dominica"
+msgstr "NIS-domein"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Resolusie: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Routers:"
+msgid "matching"
 msgstr ""
 
-#
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmasker"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
+"Kies asb. die korrekte poort. Onthou dat COM1 onder MS Windows \n"
+"ttyS0 onder GNU/Linux is."
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Konfigurasie in aabou..."
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP-Kliлnt"
+#
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Dei volgende pakkette gaan verwyder word"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP-Kliлnt"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Konnekteer aan die internet"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Gebruik bestaande partisies"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP-Kliлnt"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "Kanadees (Quebec)"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP-Kliлnt"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Muistoestel: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "Tipe:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Voeg gebruiker by"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Selekteer lOer"
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Ons gaan nou die %s konneksie herkonfigureer."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Uitwis"
+msgid "MandrakeExpert Corporate"
+msgstr "Kundige"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Gebruik outobespeuring"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "You've not selected any font"
+msgstr "Verwyder tou"
 
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "Kies u taal"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid "Printer model selection"
+msgstr "Drukkermodelkeuse"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
 msgstr ""
+"Alle data om hierdie partisie %s sal uitgewis word na verandering van die "
+"partisietipe"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d sekondes"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Sit 'n leл floppie in aandrywer %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "A valid URI must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP-Kliлnt"
+msgid "Sound configuration"
+msgstr "Konfigurasie"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Voeg gebruiker by"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Photo test page"
+msgstr "Fototoetsbladsy"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Gespesialiseerde skyfpartisionering"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS-bediener"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Datbasis"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Datbasis"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
 #: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Dra drukkerkonfigurasie oor"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Terugluslкer %s word geformateer"
+msgid "type: %s"
+msgstr "Tipe:"
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Voeg 'n gebruiker by"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovaaks (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"Die floppie is sukselvol geskep.\n"
-"U kan nou weer 'n installasie uitspeel."
+msgid "No Sound Card detected!"
+msgstr "Nie gekonnekteer nieKabelkonneksie"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Congratulations!"
-msgstr "Geluk!"
+msgid "Mouse Port"
+msgstr "Muispoort"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Ftp Server"
+msgstr "NIS-bediener"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "manual"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Outomatiese Stappe Konfigurasie"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "replay"
-msgstr "Herspeel"
+msgid "Uganda"
+msgstr "Opgradeer"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
 "\n"
-"Do you want to continue?"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "Outoinstallasiekonfigurasieprogram"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Error!"
-msgstr "Fout!"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
-"\n"
+msgid "Comoros"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
 "\n"
 "\n"
-msgstr ""
+"Ons gan nou die %s konneksie konfigureer.\n"
+"\n"
+"\n"
+"Drk OK om voort te gaan."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot metode"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generiese 3-knop muis"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Wat is u muistoestel?"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Drukkernaam:"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12480,4603 +12011,5110 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
 " \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore"
-msgstr "Herstel vanaf lкer"
+msgid "Network & Internet"
+msgstr "Netwerkkoppelvlak"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Stel lкerstelsels op"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Lituanies \"foneties\" QWERTY"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Konfigurasie"
+msgid "Sharing of local scanners"
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Netwerkkonfigurasie"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Netwerkkonfigurasie"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Netwerkkonfigurasie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote host name missing!"
+msgstr "Eksterne bedienernaam ontbreek!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
+msgid "with /usr"
 msgstr ""
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Stoor in lкer"
+msgid "Network"
+msgstr "Netwerkkoppelvlak"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Korrupte rugsteunlкer"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Die wagwoorde is te eenvoudig"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovaaks (QWERTZ)"
+
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Korrupte rugsteunlкer"
+msgid ""
+"  Transfer  \n"
+"Now"
+msgstr "Oordrag"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Korrupte rugsteunlкer"
+msgid "Use daemon"
+msgstr "Gebruikerskode"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Under Devel ... please wait."
+msgid "Authentication"
+msgstr "Magtiging"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "CUPS-bediener IP:"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Where do you want to mount %s?"
+msgstr "Waar wil u toestel %s heg?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Restore Via Network"
+msgstr "Herstel vanaf lкer"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Kies asb. 'n taal om te gebruik."
+msgid "Algeria"
+msgstr "seriaal"
 
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Die volgende pakkette gaan installeer word"
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-grootte"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Teks"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- Vorige"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Save"
-msgstr "Toestand"
+msgid "Setting Default Printer..."
+msgstr "Verstek drukker"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Korrupte rugsteunlкer"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Koppelvlak %s (met module %s)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Herstel vanaf lкer"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Naam: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Reddingspartisietabel"
+msgid "Generating preview ..."
+msgstr "Toestel word afgetas..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "seriaal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
 msgstr ""
 
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Aangepaste"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Georgies (Latynse uitleg)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Herstel vanaf lкer"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Bedienernaam:"
+msgid "Kenya"
+msgstr "Sleutelbord"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "Gebruik ``Ontheg'' eerste"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Username required"
-msgstr "Gebruikerskode"
+msgid "Installing mtools packages..."
+msgstr "Installeer pakket %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Password required"
-msgstr "Wagwoord"
+msgid "You must specify a root partition"
+msgstr "U moet oor 'n ruilpartisie beskik"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "herlaaiskyfskepping"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
 msgstr ""
 
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Host Name"
-msgstr "Rekenaarnaam"
+msgid "Select a scanner model"
+msgstr "Selekteer 'n videokaart"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - Nuwe generasie LPR"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Herstel vanaf lкer"
+msgid "Drakbackup Configuration"
+msgstr "Netwerkkonfigurasie"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid "Save as.."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Reddingspartisietabel"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Outointeken"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Herstel vanaf floppie"
+msgid "System configuration"
+msgstr "Kleurkonfigurasie"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
 msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Herstel vanaf lкer"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Verwyder tou"
+msgid "Configuring printer ..."
+msgstr "Konfigureer drukker"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Wat is u muistoestel?"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Herstel vanaf lкer"
+msgid "Bermuda"
+msgstr "Duits"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Herstel vanaf lкer"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Installeer stelsel"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Ander"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Wat is u muistoestel?"
+msgid "Remove"
+msgstr "Verwyder drukker"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "Lesotho"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Herstel vanaf floppie"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Korrupte rugsteunlкer"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr "Pyk drukstuk na program"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
 
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Toets asb. die muis"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "Ja"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Korrupte rugsteunlкer"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Watter protokol verlang u?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Wat is u muistoestel?"
+msgid "Restore Progress"
+msgstr "Herstel vanaf lкer"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Korrupte rugsteunlкer"
+msgid "Estonia"
+msgstr "Estoniaans"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
+"U het 'n gat die partisietabel maar ek kan dit nie gebruik nie.\n"
+"Die enigste oplossing is om die primкre partisie te skuif sodat die gat\n"
+"langs die ekstensie partisies is"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
+msgid "Channel"
+msgstr "Kanselleer"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
+msgid "Add"
+msgstr "Voeg by"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Op watter seriaalpoort is u modem gekoppel?"
+msgid " Error while sending mail. \n"
+msgstr "Fout met die les van lкer %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Sleutelbord"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Kies die konneksie wat u wil konfigureer"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Sekuriteitsvlak word gestel."
+
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Konfigureer netwerktoestel %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Aktiveer nou dadelik"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Soek vir pakkette om op te gradeer."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Tape \n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Hegpunt:"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "\t-CDROM.\n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "With X"
+msgstr "Wag"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Multikopkonfigurasie"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Daemon (%s) include:\n"
+"%s"
 msgstr ""
+"Behou die veranderinge?\n"
+"Huidige konfigurasie is:\n"
+"\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "U kan nie ReiserFS vir partisies kleiner as 32MB gebruik nie"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
+"Die 'rwho' protokol laat eksterne gebruikers toe om te sien wie\n"
+"ingeteken is op 'n rkeneaar wat die 'rwho' diensprogram loop.  (Amper soos "
+"'finger')."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "Domeinnaam"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Opsies"
+msgid "Sharing of local printers"
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Plaaslike drukker"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "Leeg"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Waar wil u toestel %s heg?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Muistoestel: %s\n"
+msgid "Interface \"%s\""
+msgstr "Koppelvlak %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "1 button"
+msgstr "1 knop"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- Delete hard drive tar files after backup.\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "Test"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"- Other Files:\n"
+"Allow/Forbid direct root login."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "Nog"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "U keuse? (verstek %s) "
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Geen drukker"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Herroep"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
+msgid "Interface %s"
+msgstr "Koppelvlak %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Stel muistoestel op"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Kies die hegpunte"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Backup Users"
+msgid "OK"
+msgstr "OK"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Yugoslavian (latin)"
+msgstr "Jugoslaavs (latynse uitleg)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Besig met installasie"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Backup system"
-msgstr "Stel lкerstelsels op"
+msgid "Is this an install or an upgrade?"
+msgstr "Is hierdie 'n installasie of opgradering?"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "ISDN card"
+msgstr "Interne ISDN-kaart"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
+"Geluk, die netwerk en internetkonfigurasie is voltooi.\n"
+"\n"
+"Die kongiurasie gaan op u stelsel toegepas word.\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Eksterne CUPS-drukker"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "When"
-msgstr "Wiel"
+msgid "delete"
+msgstr "Uitwis"
 
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Where"
-msgstr "Wiel"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "What"
-msgstr "Wag"
+msgid "DHCP host name"
+msgstr "Rekenaarnaam"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid "The maximum lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Send mail report after each backup to:"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Aan watter seriaalpoort is u muis gekoppel?"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Did it work properly?"
+msgstr "Het dit reg gewerk?"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Poor"
+msgstr "Swak"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Kies asb. 'n taal om te gebruik."
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Onveilig"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Gebruikerskode"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektore"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "monthly"
-msgstr ""
+msgid "No"
+msgstr "Nee"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "weekly"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "daily"
+msgid "Guadeloupe"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "hourly"
+msgid "could not find any font.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "HardDrive / NFS"
+msgid "Do you want the BackSpace to return Delete in console?"
 msgstr ""
+"Wil u hк dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
+"terugstuur)?"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "Vertikale verfristempo"
 
-#
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Toets asb. die muis"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Gaan stap '%s' binne\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Removing %s ..."
+msgstr "LPD word verwyder..."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Niger"
+msgstr "Hoog"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "No printer"
+msgstr "Geen drukker"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Korrupte rugsteunlкer"
+msgid "alert configuration"
+msgstr "Kleurkonfigurasie"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Selekteer lOer"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "NetWare drukkeropsies"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Kliek asb. op 'n partisie"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Erase Now "
-msgstr "Oordrag"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "Algemeen"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr "Drukkerstelsel:"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Kliek asb. op 'n partisie"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Voeg 'n gebruiker by"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Wat is u sleutelborduitleg?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "Netwerkkonfigurasie (%d toestelle)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "OK"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Geen wagwoord"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Drukkertounaam"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Probeer asb. weer"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Wil u aboot gebruik?"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Probeer asb. weer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarussies"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 
-#
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Toets asb. die muis"
+msgid "Move files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr "Oordrag"
+msgid "Restore From Catalog"
+msgstr "Reddingspartisietabel"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Druk"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Werkgroep:"
+
+#: ../../fs.pm:1
 #, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Korrupte rugsteunlкer"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Gebruikerskode"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO met grafiese kieskaart"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Verwyder Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Skatting"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geпnstalleer"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Verwyder tou"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Eksterne SMB/Windows 95/98/NT-drukker"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Gaan steeds voort?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Kies die pakkette wat u wil installeer"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Soek vir beskikbare pakkette"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Spesifieer opsies"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
+msgid "Vanuatu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Korrupte rugsteunlкer"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Уf die bedienernaam уf die bediener-IP moet verskaf word!"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"'n Spesiale herlaaiskyf voorsien ;n metode waarby u Linux kan laai sonder\n"
+"die gebruik van 'n normale herlaaistelsel. Dit is veral bruikbaar wanneer\n"
+"u nie SILO op u stelsel wil installeer nie, 'n ander bedryfstelsel SILO\n"
+"verwyder of SILO nie met u stelsel werk nie. Hierdie herlaaiskyf kan ook\n"
+"met die Mandrake reddingsbeeld gebruik word, wat dit makliker maak om van\n"
+"ernstige stelselfalings te herstel.\n"
+"\n"
+"Indien u 'n herlaaiskyf wil maak,\n"
+"plaas 'n skyf in die aandrywer en druk \"OK\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "File Selection"
-msgstr "Pakketkeuse"
+msgid "Theme installation failed!"
+msgstr "Kies installasieklas"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Fout met die les van lкer %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Gebruik vir teruglus"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "gebruik pppoe"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s met EKSPERIMENTELE 3D-hardewareversnelling"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Gevorderd"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "Transfer"
+msgstr "Oordrag"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Korrupte rugsteunlкer"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (VSA)"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Korrupte rugsteunlкer"
+msgid "More Options"
+msgstr "Module opsies:"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Korrupte rugsteunlкer"
+msgid "Afghanistan"
+msgstr "Albanies"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Korrupte rugsteunlкer"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron is die standaard UNIX program om gebruikergespesifiseerde programme\n"
+"op periodies geskeduleerde tye te loop. vixie cron voeg addisionele "
+"funksionaliteit\n"
+"by die standaard UNIX cron, insluitende beter sekuriteit en 'n kragtiger "
+"konfigurasie."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Lees noukeurig!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not erasable media!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Poort"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Toetsbladsye"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Druk ENTER om die gekose bedryfstelsel te laai, 'e' om te redigeer."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s not responding"
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Kan nie %s oopmaak nie: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Die wagwoorde stem nie ooreen nie."
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Geen wagwoord"
-
-#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "This may take a moment to generate the keys."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
+"Voordat u voortgaan, lees asb die lisensieterme noukeurig deur. Dit dek\n"
+"die hele Mandrake Lnux distirbusie, and indien u nie saamstem met al die\n"
+"terme daarin bevat nie, kliek om die Weier knoppie. Dit sal onmiddelik die\n"
+"installasie stop sit. Om met die installasie voort te gaan kliek op die "
+"Aanvaar\n"
+"knoppie."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
+msgid "Resolutions"
+msgstr "Resolusies"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
+"drakfirewall configurator\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Verwyder tou"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "Netwerkkonfigurasie"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS word gelaai"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
 msgstr ""
 
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Kliek asb. op 'n partisie"
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid "FATAL"
 msgstr "FAT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Uitwis"
 
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s installasie het gefaal a.g.v. hierdie fout: "
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Nee, ek verlang outo-aanteken"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Ek kan u rekenaar so opstel om X outomaties te laai.\n"
+"Wil u X begin met 'n herlaai?"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Ja, ek verlang outoaanteken met hierdie (gebruiker,werkskerm)"
+msgid "Build the disk"
+msgstr "Bou die skyf"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Diskonnekteer"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Laai X-Windowstelsel met herlaai"
+msgid "Status:"
+msgstr "Status:"
 
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "System mode"
-msgstr "Stelselmode"
+msgid "HTTP proxy"
+msgstr "HTTP instaanbediener"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS-bediener"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Europese protokol"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "Fout"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Themes"
+msgid "allow \"su\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Stoor pakketseleksie"
+msgid "Australia"
+msgstr "seriaal"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
 msgstr ""
-"U gebruik huidig %s as herlaaibestuurder.\n"
-"Kliek op Konfigureer om opstelassistent te laai."
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "Konfigureer net die \"%s\" kaart (%s)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Kies installasieklas"
+msgid "Level"
+msgstr "vlak"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Notice"
-msgstr "Geen video"
+msgid "Change the printing system"
+msgstr "Stel netwerk op"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"U stelsel onderstuen multikopkonfigurasie.\n"
+"Wat wil u doen?"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Relaunch 'lilo'"
+msgid "Configure services"
+msgstr "Konfigureer dienste"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
+#, c-format
+msgid "mount failed: "
+msgstr "heg het gefaal"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Image"
+msgstr "Beeld"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Eksterne lpd drukkeropsies"
+
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
+msgid "Selected All"
+msgstr "Selekteer lOer"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Generiese Unixdrukstelsel (Common Unix Printing System) "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Webmin Service"
+msgstr "Dienste"
+
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "device"
+msgstr "toestel"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "All"
+msgstr "Alles"
 
-#: ../../standalone/drakboot:1
+#
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr ""
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Watter drukkerstelsel (spoelprogram) verlang u?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Kies 'n nuwe grootte"
+msgid "Greece"
+msgstr "Grieks"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "'n Fout het voorgekom"
+
+#: ../../install_steps_gtk.pm:1
 #, c-format
 msgid ""
-"Display theme\n"
-"under console"
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
 msgstr ""
+"Hierdie pakket moet opgradeer word\n"
+"Is u seker u wil dit deselekteer?"
 
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Install themes"
-msgstr "Installeer stelsel"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Armenies (tikmasjien)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "LILO/GRUB metode"
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot metode"
+msgid "Printer manufacturer, model, driver"
+msgstr "Drukkervervaardiger, model, drywer"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Daar is geen medium for toestel %s nie.\n"
+"Sit asb. een in."
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Lкer/_Verlaat"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "/_File"
-msgstr "/_Lкer"
+msgid "Printer on NetWare server"
+msgstr "Eksterne Netware-drukker"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Herlaaistylkonfigurasie"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "U kan ander tale selekteer wat na installasie beskikbaar sal wees."
+msgid "Give the ram size in MB"
+msgstr "Gee die geheuegrootte in MB"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Real name"
+msgstr "Regte naam"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Verlaay installasie"
+msgid "done"
+msgstr "Klaar"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Not installed"
-msgstr "Verlaay installasie"
+msgid "Please uncheck or remove it on next time."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsole hulpprogramme"
+msgid "Higher"
+msgstr "Hoog"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "Poort"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Kies die partisies om te formatteer"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Release: "
-msgstr "Wag asb."
+msgid "Can't find %s on %s"
+msgstr "Kan nie %s oopmaak nie: %s\n"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Pakketkeuse"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "Magtiging"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Netwerkkonfigurasie-assistent"
+msgid "Japanese 106 keys"
+msgstr "Japanees 106 sleutels"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Drukker"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Windows Migration tool"
+msgid "Burkina Faso"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Urpmi"
+msgid "Use scanners on remote computers"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Drukkernaam:"
+msgid "Delete selected rule"
+msgstr "Verwyder tou"
 
 #
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Eksterne drukker"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Eksterne CUPS-drukker"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Msec"
-msgstr "Muis"
+msgid "Insert a floppy in %s"
+msgstr "Sit 'n skyf in aandrywer %s"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "verpligtend"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Beheersentrum"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "kompak"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "1 minute"
+msgstr "1 minuut"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "op bus %d id %d\n"
+
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "First Time Wizard"
+msgid "Laos"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Beheersentrum"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr ""
+"Daar is geen FAT partisies om te verander of om as teruglus (nie genoeg "
+"spasie nie) te gebruik nie"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Vuurmuur/Netwerkroteerder"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Area:"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP-Kliлnt"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernetkaart"
+msgid "Printer Server"
+msgstr "Drukkerbediener"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "Portaal"
+msgid "Disconnection from the Internet complete."
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Konneksietipe:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "Kleurkonfigurasie"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Profiel:"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Internetkonneksiekonfigurasie"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "activate now"
-msgstr "Aktiveer nou dadelik"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Portugal"
+msgstr "Poort"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "deaktiveer nou dadelik"
+msgid "Do you have another one?"
+msgstr "Beskik u oor nog?"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP-kliлnt"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid ", printing to %s"
+msgstr "Fout in die skryf van %s"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Started on boot"
-msgstr "Gelaai tydens herlaaityd"
+#
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Toets asb. die muis"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Herlaaiprotokol"
+msgid "Toggle to normal mode"
+msgstr "Skakel oor na normale gebruiksvlak"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Toestel %s: %s"
+msgid "Generic"
+msgstr "Generies"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silinder %d na silinder %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "LAN konfigurasie"
+msgid "New profile..."
+msgstr "Nuwe profiel..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN configuration"
-msgstr "LAN-konfigurasie"
+msgid "Which disk do you want to move it to?"
+msgstr "Na watter skyf wil u skuif?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "Konnekteer..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS-domein"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "Diskonnekteer..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Koppelvlak %s (met module %s)"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "INFO"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connected"
-msgstr "Gekonnekteer"
+msgid "Wallis and Futuna"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Interface:"
-msgstr "Koppelvlak:"
+msgid "Is FPU present"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway:"
-msgstr "Portaal:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Apply"
-msgstr "Pas toe"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Assistent..."
+msgid "Is this correct?"
+msgstr "Is dit korrek?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Status:"
-msgstr "Status:"
+msgid "Marshall Islands"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "Tipe:"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "Verwyder Windows(TM)"
 
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Internet access"
-msgstr "Internettoegang"
+msgid "Root password"
+msgstr "Kies 'root' se wagwoord"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Hostname: "
-msgstr "Bedienernaam:"
+msgid "Build All Kernels -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Stel plaaslike netwerk op..."
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "State"
-msgstr "Toestand"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"U het nie 'n ruilpartisie nie\n"
+"\n"
+"Wil u steeds voortgaan?"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Drywer"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "NCP-bedienernaam ontbreek!"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "Drukkernaam:"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Koppelvlak"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Laat CD-herlaai toe?"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "Konfigureer internettoegang..."
+msgid "Graphical Environment"
+msgstr "Grafiese omgewing"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Wait please"
+msgid "Gibraltar"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "on Tape Device"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Nuwe profiel..."
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "CUPS word gelaai"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Profile to delete:"
-msgstr "Profiel om uit te vee..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP-Kliлnt"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Del profile..."
-msgstr "Vee profiel uit..."
+msgid "Filesystem type: "
+msgstr "LOerstelseltipe: "
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Netwerkkonfigurasie (%d toestelle)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "Konneksie word begin..."
 
-#: ../../standalone/drakedm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Vietnam"
 msgstr ""
 
-#: ../../standalone/drakedm:1
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Beskrywing"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Optimize your security by using Mandrake Linux"
 msgstr ""
-"Kon nie mkbootdisk ordentelik afsluit nie:\n"
-" %s \n"
-" %s"
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "Kon nie vurk nie: %s"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+msgid "Help"
 msgstr ""
-"Daar is geen medium for toestel %s nie.\n"
-"Sit asb. een in."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "versker asb dat die regte mediatipe vir toestel %s beskikbaar is"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Bou die skyf"
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Output"
-msgstr "Uitset"
+msgid "Your personal phone number"
+msgstr "U persoonlike telefoonnommer"
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Remove a module"
-msgstr "Verwyder module"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Watter grootte wil u vir Windows behou?"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add a module"
-msgstr "Voeg module by"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Toetsbladsy(e) is na die drukker gestuur.\n"
+"Dit mag 'n tydjie neem voordat drukwerk begin.\n"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "laat SCSI-modules weg"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Gebruikerskode"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
-msgid "if needed"
-msgstr "indien nodig"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "laat RAID-modules weg"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) drukkeropsies"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "force"
-msgstr "forseer"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
 
 #: ../../standalone/drakfloppy:1
 #, c-format
 msgid "mkinitrd optional arguments"
 msgstr "mkinitrd opsionele parameters"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Expert Area"
-msgstr "Kundige area"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "kernel version"
-msgstr "bedryfstelselkernweergawe"
+msgid "Protocol for the rest of the world"
+msgstr "Protokol vir die res van die wкreld"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "default"
-msgstr "verstek"
+msgid "Print test pages"
+msgstr "Druk toetsbladsy(e)"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "General"
-msgstr "Algemeen"
+msgid "64 MB or more"
+msgstr "64MB of meer"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "herlaaiskyfskepping"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Size"
-msgstr "Grootte"
+msgid "Not formatted\n"
+msgstr "Nie geformatter\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Module name"
-msgstr "Modulenaam"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Verlaay installasie"
+msgid "Periodic Checks"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "PXE Server Configuration"
+msgstr "Sluit konfigurasie af"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Beginboodskap"
+msgid "Backup the system files before:"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Post Install"
-msgstr "Installasie"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
 msgstr ""
+"Hierdie is die standaard sekuriteitsvlak wat aanbeveel word vir rekenaars\n"
+"wat aan die internet as 'n kliлnt konnekteer. Daar is heelwat "
+"sekuriteitstoetse."
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "Eerste sagteskyfaandrywer"
 
-#
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Verwyder drukker"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Lкer/_Verlaat"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Selekteer lOer"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Choose the new size"
+msgstr "Kies die nuwe grootte"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "here if no."
+msgid "Media class"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "click here if you are sure."
+msgid "The %s is not known by this version of Scannerdrake."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Install List"
-msgstr "Installeer stelsel"
+msgid "Faroe Islands"
+msgstr "Yslandies"
 
 #: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Restart XFS"
+msgstr "Laai dit"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Drukker"
+msgid "Please enter the directory to save to:"
+msgstr "Toets asb. die muis"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Abiword"
-msgstr "Aborteer"
+msgid "Model name"
+msgstr "Modulenaam"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Kantoor"
+msgid "Albania"
+msgstr "Albanies"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Kies die partisies om te formatteer"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normale modus"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "Aborteer"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Hegpunt"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "Drukkerkonneksietipe"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Sluit konfigurasie af"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Deпnstallasie van RPMs"
+msgid "Network %s"
+msgstr "Netwerkkoppelvlak"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Get Windows Fonts"
+msgid "Malayalam"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Formateer partisies"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s out of range!"
+msgstr "Opsie %s is buite bereik!"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "done"
-msgstr "Klaar"
+msgid "Connect %s"
+msgstr "Konnekteer"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "xfs restart"
-msgstr "beperk"
-
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Restarting CUPS..."
+msgstr "Laai dit"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "Laai dit"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Netwerk op pad af"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Duplikaat hegpunt %s"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "type1inst building"
+msgid "if set to yes, run chkrootkit checks."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#
+#: ../../network/tools.pm:1
 #, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Konneksiekonfigurasie"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Generies"
+
+#: ../../help.pm:1
 #, c-format
-msgid "ttf fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Quit"
+msgstr "Verlaat"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fonts conversion"
+msgid "Myanmar"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Outo-allokeer"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "Toets vir foutiewe areas?"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Berei installasie voor"
+msgid "Other MultiMedia devices"
+msgstr "Ander"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Formatteer floppie"
+msgid "No remote machines"
+msgstr "(op hierdie rekenaar)"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search for fonts in installed list"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS-magtiging"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Reselect correct fonts"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
 msgstr ""
+"Opsie ``Beperk instruksielynopsies'' kan nie sonder wagwoord gebruikword nie"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Internetkonneksiedeling is ontsper"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "%s is nie gevind nie"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_0"
+msgstr "Kaart IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "parse all fonts"
+msgid "United Arab Emirates"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Unselect fonts installed"
+msgid "Card IO_1"
+msgstr "Kaart IO_1"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Search installed fonts"
+msgid "Routers:"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Internetkonneksiedeling"
+#: ../../lang.pm:1
+#, c-format
+msgid "Kazakhstan"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Internetkonneksiedelingkonfigurasie"
+msgid "Display all available remote CUPS printers"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Geen internetkonneksiedeling is al gekonfigureer nie."
+msgid "Mandrake Linux Installation %s"
+msgstr "Mandrake Linux Installasie %s"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Die opstelling is alreeds gedoen en is alreeds ook geaktiveer."
+msgid "Thai keyboard"
+msgstr "Thai sleutelbord"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Die opstelling van is alreeds gedoen, maar is tans gedeaktiveer."
+msgid "Dialup options"
+msgstr "Opbelopsies"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "Bouvet Island"
 msgstr ""
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "Probleme met Installasue van pakket %s"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"Skrips word konfigureer, sagterware installeer en bedieners afgeskop..."
+"Verander u CDROM!\n"
+"\n"
+"Sit asb. die CDROM getiteld \"%s\" in die aandrywer en druk OK. Indien u "
+"nie\n"
+"hieroor beskik nie, druk Kanselleer om installasies vanaf diй CDROM te vermy."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "Konfigurasie in aabou..."
+msgid "Polish"
+msgstr "Pools"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Moontlike LAN-adresbotsing gevind in konfigurasie %s!\n"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Beheersentrum"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "\t-Network by webdav.\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
+"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
+"hardewarekonfigurasieprogram."
 
+#
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Netmask"
+msgstr "Netmasker"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Plaaslike drukker"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Reeks (seriaal)"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 knoppies"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Watter tipe is u ISDN-konneksie?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
+#, c-format
+msgid "Label"
+msgstr "Etiket"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Save on floppy"
+msgstr "Stoor op floppie"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Nuwe drukkernaam"
+msgid "Printer auto-detection"
+msgstr "Gebruik outobespeuring"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Which of the following is your ISDN card?"
+msgstr "Wat is u ISDN-kaart?"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS is 'n populкre protokol vir lкerdeling oor TCP/IP netwerke.\n"
+"Hierdie diens voorsien NFS-bedienerfunksionaliteit. Dit word via\n"
+"die /etc/exports lкer opgestel."
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS-bediener IP:"
+msgid "Msec"
+msgstr "Muis"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "geen netwerkkaart gevind nie"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "U keuse? (verstek %s) "
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
 "\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
 
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "Frans"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Tseggies (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "Op poort %s bespeur"
+
 #: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Drukkerbediener"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Opsomming"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "Next"
+msgstr "Teks"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Verander drukkerkonfigurasie"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Waar wil u die herlaaistelsel installeer"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Outomatiese CUPS konfigurasie"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor is nie opgestel nie"
+msgid "Puerto Rico"
+msgstr "Protokol"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
-"Kies asb. die netwerkkaart wat aan die loakel area netwerk gekoppel is."
 
-#
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Lituanies \"nommerry\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"Daar is net een konfigureerde netwerkkaart op u stelsel.\n"
-"\n"
-"%s\n"
-"\n"
-"Ek gaan nou u LAN met daardie kaart opstel."
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Netwerkkoppelvlak"
+msgid "Anguilla"
+msgstr ""
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS-domein"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
-"Geen ethernetkaart is op die stelsel gevind nie. Gebruik asb. die "
-"hardewarekonfigurasieprogram."
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Antarctica"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Koppelvlak %s"
+msgid "Mount options"
+msgstr "Hegopsies:"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "Drukkerbediener"
+msgid "Jamaica"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "Internetkonneksiedeling"
+msgid "Please wait, preparing installation..."
+msgstr "Wag asb. installasie word voorberei"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Internetkonneksiedeling is geaktiveer"
+msgid "Czech (QWERTZ)"
+msgstr "Tseggies (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Bedieneers word aktiveer..."
+msgid "Track network card id (useful for laptops)"
+msgstr "Volg netwerkkart ID. (nuttig vir skootrekenaars)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "ignoreer/sien oor"
+msgid "The port number should be an integer!"
+msgstr "Die poortnommer moet  heeltal wees."
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "herkonfigureer"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Tik  drukkertoestel URI in"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "Herstel vanaf floppie"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "enable"
-msgstr "Aktiveer"
+msgid "Add to LVM"
+msgstr "Voeg by LVM"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans gedeaktiveer.\n"
-"\n"
-"Wat wil u doen?"
+#: ../../network/network.pm:1
+#, c-format
+msgid "DNS server"
+msgstr "DNS bediener"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Internetkonneksiedeling is gesper"
+msgid "Trinidad and Tobago"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Internetkonneksiedeling is gedeaktiveer"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD en LPRng ondersteun nie IPP-drukkers nie.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Bedieners word gedeaktiveer..."
+msgid "simple"
+msgstr "eenvoudig"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "disable"
-msgstr "deaktiveer"
+msgid "Clear all"
+msgstr "Verwydeer almal"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Die opstelling van die Internetkonnkesiedeling is alreeds gedoen.\n"
-"Dis tans aktief.\n"
-"\n"
-"Wat wil u doen?"
+msgid "No test pages"
+msgstr "Geen toetsbladsye"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Internetkonneksiedeling is ontsper"
+msgid "Adapter %s: %s"
+msgstr "Toestel %s: %s"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Falkland Islands (Malvinas)"
 msgstr ""
 
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Unknown model"
+msgstr "Onbekende model"
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "group :"
-msgstr "Werkgroep:"
+msgid "authentication"
+msgstr "Magtiging"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "user :"
-msgstr "Gebruikerskode"
+msgid "Backup Now"
+msgstr "Stel lкerstelsels op"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Stoor pakketseleksie"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_Lкer"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set-UID"
+msgid "Mayotte"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "Outoinstallasieskyf word geskep."
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Property"
-msgstr "Poort"
+msgid "Searching for scanners ..."
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Permissions"
-msgstr "Weergawe: %s\n"
+msgid "Partitioning"
+msgstr "Druk"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Current user"
-msgstr "Aanvaar gebruiker"
+msgid "Russia"
+msgstr "Russies"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "browse"
+msgid "ethernet card(s) detected"
+msgstr "ethernet kaart(e) bespeur"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Syslog"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Verwyder tou"
+msgid "Not enough free space for auto-allocating"
+msgstr "Nie genoeg spasie beskikbaar om nuwe partisies toe te ken nie"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Uitwis"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "Kies 'root' se wagwoord"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Voeg drukker by"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Voeg module by"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Alle data om partisie %s sal uitgewis word met die grootteverandering"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Move selected rule down one level"
+msgid "Internet connection configuration"
+msgstr "Internetkonneksiekonfigurasie"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "/_About..."
+msgstr "/_Aangaande..."
+
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Down"
-msgstr "Klaar"
+msgid "Bengali"
+msgstr "Aktiveer"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Preference: "
+msgstr "Voorkeure: "
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Up"
-msgstr ""
+msgid "Wizard..."
+msgstr "Assistent..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "select perm file to see/edit"
+msgid "Services: %d activated for %d registered"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Create a bootdisk"
+msgstr "Maar 'n herlaaiskyf"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "partisie %s"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(module %s)"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
 msgstr "Werkgroep:"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "user"
-msgstr "Gebruikerskode"
+msgid "Printer host name or IP"
+msgstr "Drukkerbedienernaam"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "path"
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr ""
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Outoinstallasieskyf word geskep."
+msgid "Show current interface configuration"
+msgstr "Verander drukkerkonfigurasie"
 
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "Ontwikkeling"
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Done"
+msgstr "Klaar"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "No image found"
-msgstr "Plaaslike drukker"
+msgid "Web Server"
+msgstr "Bediener"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (installasievertoondrywer)"
+msgid "Chile"
+msgstr "Sluit af"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP end ip"
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s alreeds bygevoeg)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid ", using command %s"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Koppelvlak %s (met module %s)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Kies asb. die netwerkkoppelvlak wat u wil gebruik vir die internet."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
 msgstr ""
-"Nou dat u internetkonfigurasie opgestel is,\n"
-"moet u die rekenaar opstel om dit te deel.\n"
-"LW: U benodig 'n ware netwerkkaart om 'n lokalearea netwerk (LAN) op te "
-"stel.\n"
-"\n"
-"Wil u internetdeling opstel?\n"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Sluit konfigurasie af"
+msgid "Add/Del Users"
+msgstr "Voeg gebruiker by"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Sluit konfigurasie af"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Wag asb. installasie word voorberei"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "System Options"
-msgstr "Module opsies:"
+msgid "Here is the full list of available countries"
+msgstr "Hierdie is die volledige lys van beskikbare sleutelborde"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Module opsies:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Alternatiewe toetsbladsy (A4)"
 
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"Indien u oor al die gelyste CD's beskik, kliek OK.\n"
+"Indien u oor geen van die gelyste CD's beskik nie, kliek Kanselleer.\n"
+"Indien u net oor sekere CDs beskik, deselekteer die ander en kliek OK."
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Eksterne lpd drukkeropsies"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Sekuriteitsvlak word gestel."
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Sekuriteitsvlak word gestel."
+msgid "Backup user files"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Verstek)"
+msgid "New"
+msgstr "nuut"
 
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Load from floppy"
+msgstr "Laai vanaf floppie"
+
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Nie gekonnekteer nieKabelkonneksie"
+msgid "The following printer was auto-detected. "
+msgstr "Dei volgende pakkette gaan verwyder word"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Toestel word afgetas..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Tik  drukkertoestel URI in"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norweegs"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Drukkermodelkeuse"
+msgid "Searching for new scanners ..."
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Kies 'n lкer"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "choose image"
-msgstr "Kies 'n lкer"
+msgid "select path to restore (instead of /)"
+msgstr "Wat is u muistoestel?"
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
 msgid "Configure bootsplash picture"
 msgstr "Konfigureer dienste"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Make kernel message quiet by default"
+msgid "China"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Display logo on Console"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Choose color"
-msgstr "Kies 'n monitor"
+msgid "Georgia"
+msgstr "Norweegs"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Save theme"
-msgstr "Installeer stelsel"
+msgid "Reading data of installed printers..."
+msgstr "Plaaslike drukker"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Preview"
-msgstr "toestel"
+msgid " Erase Now "
+msgstr "Oordrag"
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "the color of the progress bar"
+msgid "server"
+msgstr "bediener"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Sit 'n FAT-geformatteerde skyf in aandrywer %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "the height of the progress bar"
+msgid "Please Wait... Applying the configuration"
+msgstr "Wag asb... Konfigurasie word toegpas"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welkom by GRUB, die bedryfstelselkieskaart!"
+
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "the width of the progress bar"
+msgid " on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "Choosing a display manager"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Rekenaarnaam"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Voeg 'n gebruiker by"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "text box height"
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "text width"
+msgid "I can't find needed image file `%s'."
+msgstr "Ek kan nie die nodige herlaaibeeld '%s' kry nie."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Shell"
+msgstr "Dop"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "PCI"
+msgstr "PCI"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Browse"
+msgid "Can't login using username %s (bad password?)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "Drukkernaam:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani (latyns)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "final resolution"
-msgstr "Resolusie"
+msgid "Package not installed"
+msgstr "Verlaay installasie"
 
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, fuzzy, c-format
-msgid "first step creation"
-msgstr "herlaaiskyfskepping"
+msgid "Become a MandrakeExpert"
+msgstr "Kundige"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgid "American Samoa"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Copy fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "No TV Card detected!"
+msgid "Harddrake help"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid "Bogomips"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Have a nice day!"
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "XawTV isn't installed!"
+msgid "Restore all backups"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Daar was 'n fout met die installasie van die pakkette:"
-
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Scanning for TV channels"
+msgid "if set to yes, check open ports."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid "This may take a moment to erase the media."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Area:"
-msgstr ""
+msgid "You can't select/unselect this package"
+msgstr "U kan nie hierdie pakket selekteer/deselekteer nie"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "Warning"
+msgstr "Waarskuwing"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Please,\n"
-"type in your tv norm and country"
+"\n"
+"- Other Files:\n"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
-msgstr ""
+msgid "Remote host name"
+msgstr "Eksterne bedienernaam"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Newzealand"
+msgid "deactivate now"
+msgstr "deaktiveer nou dadelik"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Frankryk"
+msgid "Computing the size of the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
 
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "East Europe"
-msgstr "Europa"
+msgid "Italy"
+msgstr "Italiaans"
 
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "West Europe"
-msgstr "Europa"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer"
+msgstr "Drukkernaam"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "disable"
+msgstr "deaktiveer"
 
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Japan (cable)"
+msgid "error unmounting %s: %s"
+msgstr "fout met onthegting van %s: %s"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Do it!"
+msgstr "Gaan voort!"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cayman Islands"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (broadcast)"
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Kanadees (Quebec)"
+msgid "Select model manually"
+msgstr "Eksterne drukkernaam"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "Format"
+msgstr "Formatteer"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "USA (cable)"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
 msgstr ""
+"Die mees algemene metode vir ADSL is om  pppoe te gebruik.\n"
+"Daar is wel sekere konneksie wat pptp of DHCP gebruik.\n"
+"Indien u nie weet nie, kies 'gebruik pppoe'."
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "USA (broadcast)"
+msgid "Various"
+msgstr "Verskeie"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
 "\n"
 "\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "primary"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d sekondes"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Click on a device in the left tree in order to display its information here."
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Onbekende model"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Onbekende model"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Drukkerdata word gelees..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Albanies"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Run config tool"
+msgid "Lithuania"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Stel muistoestel op"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Information"
-msgstr "Vertoon inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Sien hardeware inligting"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Hardeskyfdeteksie."
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Kompak"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Op poort %s bespeur"
+msgid "Detected model: %s %s"
+msgstr "%s bespeur"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Author:"
-msgstr "Aftas"
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
 
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "Local files"
+msgstr "Plaaslike lкers"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "/_About..."
-msgstr "/_Aangaande..."
+msgid "maybe"
+msgstr "moontlik"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Report Bug"
+msgid "Panama"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Selekteer 'n videokaart"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Monitor"
+msgstr "Monitor"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Harddrake help"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65-duisend kleure (16 bis)"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Beskrywing"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Help"
+msgid "Size: %d KB\n"
+msgstr "Groote: %d KB\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Verlaat"
+msgid "Remove fonts on your system"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Gebruik outobespeuring"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Gebruik outobespeuring"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "X met herlaai"
 
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Gebruik outobespeuring"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#, c-format
-msgid "/_Options"
-msgstr "/_Opsies"
+msgid "Please enter the directory to save:"
+msgstr "Toets asb. die muis"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "the vendor name of the processor"
+msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
-msgid "the vendor name of the device"
-msgstr ""
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Nie genoeg partisies vir RAID vlak %d nie\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Aan watter seriaalpoort is u muis gekoppel?"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"Hier is die bestaande drukkertoue.\n"
+"U kan byvoeg or verwyder soos nodig."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr ""
+msgid "Connected"
+msgstr "Gekonnekteer"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Formatering"
+msgid "USB printer \\#%s"
+msgstr "Geen drukker"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "Macedonian"
+msgstr "Masedonies"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Processor ID"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Netwerkdrukker (sok)"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Save"
+msgstr "/Lкer/_Stoor"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "the name of the CPU"
+msgid "Mali"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Naam: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 knoppies"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 knoppies"
+msgid "No details"
+msgstr "Detail"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "very nice"
+msgstr "baie oulik"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Model name"
-msgstr "Modulenaam"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr ""
+msgid "Preview"
+msgstr "toestel"
 
-#: ../../standalone/harddrake2:1
+#
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Model"
-msgstr "Muis"
+msgid "Remote Control"
+msgstr "Eksterne drukker"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kaartgeheue (DMA)"
+msgid "Please select media for backup..."
+msgstr "Kies asb. 'n taal om te gebruik."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 bediener: %s\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Media class"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP-Kliлnt"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "vlak"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Georgies (Russiese uitleg)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Opsies"
 
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Formatteer"
+msgid "Your printer model"
+msgstr "Eksterne drukkernaam"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Dra drukkerkonfigurasie oor"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Toestand"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "The %s is unsupported"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Laai die drywers vir u USB-toestelle"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Disk"
+msgstr "Deens"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Tik  drukkertoestel URI in"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Fdiv bug"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "Israelies"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "Frans"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Flags"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "add a rule"
+msgstr "Voeg module by"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Module"
-msgstr "Muis"
+msgid "A command line must be entered!"
+msgstr "'n Geldige URI moet verskaf word!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "Select user manually"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer printer configuration"
+msgstr "Dra drukkerkonfigurasie oor"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Netwerkportaaltoestel"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Wil u die konneksie met herlaaityd aanskakel?"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "old static device name used in dev package"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Old device file"
-msgstr "Selekteer lOer"
+msgid "%s (Port %s)"
+msgstr "Poort"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "This field describes the device"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Korrupte rugsteunlкer"
 
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Sekuriteitsvlak word gestel."
-
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr ""
+msgid "Accept user"
+msgstr "Aanvaar gebruiker"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "Bediener"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Swak keuse, probeer weer\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Coma bug"
+msgid "Heard and McDonald Islands"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid "No alternative driver"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Skakel oor na kundige gebruiksvlak"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "(on this machine)"
+msgstr "(op hierdie rekenaar)"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Cache size"
-msgstr "blokgrootte"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP-adres moet in 1.2.3.4. formaat wees"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Location on the bus"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "U kan nie heirdie pakket verwyder nie. Dis alreeds geпnstalleer"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Magtiging"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Drywer"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bogomips"
-msgstr ""
+msgid "Printer on remote lpd server"
+msgstr "Eksterne LPD-drukker"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "EIDE/SCSI channel"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Kanselleer"
-
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bus"
-msgstr ""
+msgid "No mouse"
+msgstr "Geen muis"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "Germany"
+msgstr "Duitsland"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Alternatiewe toetsbladsy (A4)"
+msgid "Austria"
+msgstr "seriaal"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
 msgstr ""
-"Wil u hк dat die 'BackSpace' sleutel moet uitvee in die konsole ('n 'Delete' "
-"terugstuur)?"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Wat is u sleutelborduitleg?"
+msgid "Collapse Tree"
+msgstr "Maak boom toe"
 
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Kon nie die intydse opgradering begin nie !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Outoinstallasiekonfigurasieprogram"
 
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Dit asb. die instasllasie CDROM in die aandrywer en druk OK. Indien u nie\n"
-"hieroor beskik nie, druk Kanselleer om die intydse opgradering te vermy."
+msgid "Configure networking"
+msgstr "Stel netwerk op"
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Verander CDROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "Waar wil u die herlaaistelsel installeer"
 
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Save as.."
+msgid "The %s is not supported by this version of Mandrake Linux."
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Probeer asb. weer"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "DHCP client"
+msgstr "DHCP-kliлnt"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Kleurkonfigurasie"
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Restoring from file %s failed: %s"
+msgstr "Herstel van lйer %s het gefaal: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Muis (seriaal, ou C7 tipe)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Are you sure that you want to set up printing on this machine?\n"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "load setting"
-msgstr "Formatering"
+msgid "New devfs device"
+msgstr "Netwerkportaaltoestel"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "interessant"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Herlaaistylkonfigurasie"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Drukkerbediener"
+msgid "Automatic time synchronization"
+msgstr "Outotydsinkronisasie met NTP"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "Dienste"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup files not found at %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS-bediener"
+#: ../../share/advertising/01-thanks.pl:1
+#, c-format
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS-bediener"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "Armenies (Foneties)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix e-posbediener, Inn netnuusbediener"
+msgid "Card model:"
+msgstr "Kaartgeheue (DMA)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS-bediener"
+msgid "Thin Client"
+msgstr "DHCP-Kliлnt"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Domeinnaam"
+msgid "Start Server"
+msgstr "NIS-bediener"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Apache World Wide Web Server"
+msgid "Turkmenistan"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
-msgstr ""
-"Welkom by die proksiekonfigurasienutsprogram.\n"
-"\n"
-"Hier kan u die HTTP en FTP-instaanbedieners\n"
-"opstel met of sonder aantekenkodes en wagwoorde\n"
+msgid "All remote machines"
+msgstr "(op hierdie rekenaar)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Konfigurasie"
+msgid "Install themes"
+msgstr "Installeer stelsel"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mail alert"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
+msgid "Espanol"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Content of the file"
-msgstr ""
+msgid "Preparing installation"
+msgstr "Berei installasie voor"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Calendar"
+msgid "Edit selected host/network"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Choose file"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Voeg gebruiker by"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "but not matching"
+msgid "Nauru"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "matching"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "Berei installasie voor"
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Settings"
+msgid "Auto-detect printers connected directly to the local network"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr ""
+msgid "LAN configuration"
+msgstr "LAN-konfigurasie"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "search"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "hard disk model"
+msgstr "Kaartgeheue (DMA)"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "U kan nie  LVM logiese volume vir hegpunt %s gebruik nie."
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Syslog"
+msgid "Get Windows Fonts"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "Beginboodskap"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "User"
-msgstr "Gebruikerskode"
-
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "/Help/_About..."
-msgstr "/Help/_Aangaande..."
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Opsies/Toets"
+msgid "Iranian"
+msgstr "Iranies"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Lкer/-"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Croatia"
+msgstr "Kroaties"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Lкer/Stoor _as"
+msgid "Gateway:"
+msgstr "Portaal:"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Voeg gebruiker by"
 
-#: ../../standalone/logdrake:1
+#
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Lкer/_Stoor"
+msgid "Remote printer name"
+msgstr "Eksterne drukkernaam"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Lкer/_Oopmaak"
+msgid "Device: "
+msgstr "Toestel:"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#, fuzzy, c-format
+msgid "Printerdrake"
+msgstr "Drukker"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Lкer/_Nuut"
+msgid "License agreement"
+msgstr "Lisensieooreenkoms"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "Module opsies:"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Show only for the selected day"
+msgid "Please enter the directory where backups are stored"
 msgstr ""
 
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "Emuleer derde knop?"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Gebruik sekuriteitsvlak"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Wat is u muistoestel?"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Konnekteer"
+msgid ", USB printer"
+msgstr "Geen drukker"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Diskonnekteer"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Choose the applications that will support the fonts:"
+msgstr "Kies die partisies om te formatteer"
 
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
 #, c-format
-msgid "received"
-msgstr ""
+msgid "Configure X"
+msgstr "Stel X op"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Turks (tradisionele \"F\" model)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "received: "
-msgstr ""
+msgid "Congratulations!"
+msgstr "Geluk!"
 
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "sent: "
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Use owner id for execution"
+msgstr "Gebruik outobespeuring"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Local measure"
-msgstr "Plaaslike lкers"
+msgid "Down"
+msgstr "Klaar"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "average"
+msgid "Raw printer (No driver)"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Kleurkonfigurasie"
+msgid "Install rpm"
+msgstr "Installasie"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Konneksiespoed"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Tyd oor "
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "UK keyboard"
+msgstr "VK sleutelbord"
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
-msgstr ""
+msgid "Unmount"
+msgstr "Ontheg"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Uninstall Fonts"
+msgstr "Deпnstallasie van RPMs"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Konnekteer aan die internet"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Konneksie word getoets..."
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Duits (geen dooie sleutels)"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logs"
-msgstr ""
+msgid "Transferring %s..."
+msgstr "%s word oorgedra..."
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Konneksietipe:"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32-duisend kleure (15 bis)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "Receiving Speed:"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Stoor in lкer"
+msgid "Reboot"
+msgstr "Basis"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Statistics"
+msgid "Gambia"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profiel:"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Netwerkkonfigurasie"
-
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Plaaslike drukker"
+msgid "Mandrake Control Center"
+msgstr "Beheersentrum"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Name/IP address of host:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Selekteer 'n videokaart"
-
-#
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Toets asb. die muis"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "\t-Tape \n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(op hierdie rekenaar)"
+#: ../../standalone/drakhelp:1
+#, c-format
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Verwyder tou"
+msgid "Remember this password"
+msgstr "Geen wagwoord"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s bespeur"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Internetkonneksiedeling is geaktiveer"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Voeg gebruiker by"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by SSH.\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Gebruik beskikbare spasie"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Gebruik die beskikbare spasie op die Windowspartisie"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(op hierdie rekenaar)"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Wil u 'n drukwerk nou konfigureer?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Use the scanners on hosts: "
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86-drywer: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Druk"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Kies die pakkette wat u wil installeer"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Papua New Guinea"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Serbian (cyrillic)"
+msgstr "Serwies (Kirillies)"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Make kernel message quiet by default"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
 msgstr ""
+"Wil u hierdie drukker (\"%s\")\n"
+"die verstek drukker maak?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Plaaslike drukker"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Druk"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Add a scanner manually"
-msgstr ""
+msgid "Creating bootdisk..."
+msgstr "Herlaaiskyf word geskryf"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Plaaslike drukker"
+msgid "Wait please, testing your connection..."
+msgstr "Konneksie word getoets..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+msgid "Bringing down the network"
+msgstr "Netwerk op pad af"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Aantekenkode"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS is 'n populкre protokol vir lкerdeling oor TCP/IP netwerke.\n"
+"Hierdie diens vorosien die NFS-lкersluitfunksionaliteit."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "Herlaaitoestel"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP-Kliлnt"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Plaaslike drukker"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "dismiss"
+msgstr "ignoreer/sien oor"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Gebruik outobespeuring"
+msgid "Printing/Scanning on \"%s\""
+msgstr "Netwerk op pad af"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "laat RAID-modules weg"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd is die drukkerdiensprogram en is nodig vir lpr om te funksioneer.\n"
+"Dit is 'n diens wat drukstukke na drukkers toe reguleer."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The %s is unsupported"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "Internetkonneksiekonfigurasie"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "comma separated numbers"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Poort"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ", "
+msgid "Move selected rule up one level"
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s bespeur"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid " ("
-msgstr ""
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Daar is geen netwerkkaart op hierdie rekenaar nie!"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Selekteer 'n videokaart"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Wil u die werklik die drukker verwyder?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Wil u 'n drukwerk nou konfigureer?"
+msgid "I can't find any room for installing"
+msgstr "Ek kon geen plek vir installasie vind nie."
 
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Op poort %s bespeur"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Default printer"
+msgstr "Verstek drukker"
 
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
+"U het meer as een internetkonneksiemetode opgste.\n"
+"Kies die een wat u verlang.\n"
+"\n"
 
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Verander RAID"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
+"Ek het 'n ISDB PCI-kaart gevind, maar ek ken nie die tipe nie. Kies asb.'n "
+"PCI-kaart op die volgende skerm."
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Add user"
+msgstr "Voeg gebruiker by"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-skywe %s\n"
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "seriaal"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Kies u sleutelbord"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
+msgid "Format partitions"
+msgstr "Formateer partisies"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Outomatiese CUPS konfigurasie"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Drukkerdata word gelees..."
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+msgid "enable radio support"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Druk"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Teruglus lкernaam: %s"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Op watter seriaalpoort is u modem gekoppel?"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "Moet nie drukkers oordra nie"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Dra drukkerkonfigurasie oor"
+msgid "Delay before booting the default image"
+msgstr "Wagperiode voro verstekstelsel gelaai word"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Kliek asb. op 'n partisie"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Gebruikerskode"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Korrupte rugsteunlкer"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Configure"
+msgstr "Konfigureer"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Selekteer 'n videokaart"
+
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgid "Backup Users"
 msgstr ""
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"Tik asb die rekenaarnaam in.\n"
+"Dit moet 'n volle gekwalifiseerde naam wees,\n"
+"bv. ``myne.mywerk.co.za''.\n"
+"U mag ook die netwerkhek byvoeg indien daar een is"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Select Printer Spooler"
+msgstr "Kies drukkerspoelprogram"
 
-#: ../../share/advertising/08-store.pl:1
-#, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Kies 'n nuwe grootte"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
 msgstr ""
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Plaaslike drukker"
+
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Sekere belangrike pakkette het nie korrek geпnstalleer nie.\n"
+"Уf die CDROM-aandrywer уf die CD is foutief.\n"
+"Toets die CD op 'n werkende Linux installasie met \"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s bespeur"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
-#, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Azerbaijan"
+msgstr "Albanies"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (VSA)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Hoe is die drukker gekonekteer?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Kundige"
+msgid "Security level"
+msgstr "Sekuriteitsvlak word gestel."
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Resolusie"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Dienste"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Kundige"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -17091,10 +17129,6 @@ msgstr ""
 "gnumeric), PDF-sigprogramme, ens."
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Werkstasie"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Speletjiesrekenaar"
 
@@ -17170,10 +17204,6 @@ msgstr ""
 "versameling bygaande hulpprogramme"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Grafiese omgewing"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome werkstasie"
 
@@ -17194,10 +17224,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, ens."
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Ontwikkeling"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C en C++ ontwikkelingsprogrammateke, programme en insluitlкers"
 
@@ -17269,40 +17295,82 @@ msgstr "NFS, SMB, Instaan- , SSH (Bedieners)"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Multimediastasie"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
+"en om ook die web deur te blaai."
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Internetkonneksie en konfigurasie"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Configure the connection"
+#~ msgstr "Stel netwerk op"
+
+#~ msgid "Disconnect"
+#~ msgstr "Diskonnekteer"
+
+#~ msgid "Connect"
+#~ msgstr "Konnekteer"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan u konneksie herkonfigureer."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan aan die internet konnekter of u konneksie herkonfigureer."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "U is nie tans aan die internet gekonnekteer nie."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "U kan diskonnekteer or herkonfigureer."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "U is tans aan die internet gekonnekteer."
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Klank- en videospelers/redigeerders"
+#~ msgid "Author:"
+#~ msgstr "Aftas"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Speletjiesrekenaar"
+#~ msgid "Audio station"
+#~ msgstr "Multimediastasie"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Grafiese programme soos Die GIMP"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Stel hulpprogramme om e-pos en netnuus te lees en te stuur (pine, mutt, tin) "
-"en om ook die web deur te blaai."
+#~ msgid "Video station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Klank- en videospelers/redigeerders"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Speletjiesrekenaar"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Grafiese programme soos Die GIMP"
 
 #, fuzzy
 #~ msgid "Printer sharing"
@@ -17473,10 +17541,6 @@ msgstr ""
 #~ "nie, dan het u nie /boot nodig nie."
 
 #, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Opgradeer"
-
-#, fuzzy
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "Wil u die konfigurasie toets?"
 
diff --git a/perl-install/share/po/ar.po b/perl-install/share/po/ar.po
index 788f85633..634899b82 100644
--- a/perl-install/share/po/ar.po
+++ b/perl-install/share/po/ar.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2003-03-04 16:58-0300\n"
 "Last-Translator: Mohammed Gamal <f2c2001@yahoo.com>\n"
 "Language-Team: Arabic\n"
@@ -15,948 +15,1756 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 0.9.6\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш№Щ…Щ„ Щ…ШіШ­ Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ШҐЩЉШ¬Ш§ШЇ Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr "if set to yes, check additions/removals of suid root files."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr "\t\tErase=%s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "Щ…Щ†ЩЃШ° Ш·Ш§ШЁШ№Ш© Ш§Щ„ШґШЁЩѓШ©"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ†:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
-"Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ… ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш© \"fileshare\".\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШіШЄШ®ШЇЩ… userdrake Щ„ШҐШ¶Ш§ЩЃШ© Щ…ШіШЄШ®ШЇЩ… ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©."
+"Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ… Ш§Щ„Щ…Ш­ЩЃЩ€Шё Щ„ЩЉШі ШЁЩ†ЩЃШі Ш§Щ„Ш­Ш¬Щ…\n"
+"Щ„Ш§ ШІЩ„ШЄ ШЄШ±ЩЉШЇ Ш§Щ„ШҐЩѓЩ…Ш§Щ„Шџ"
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Cancel"
-msgstr "Ш§Щ„ШєШ§ШЎ"
+msgid "Which username"
+msgstr "ШЈЩЉ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Launch userdrake"
-msgstr "ШґШєЩ‘Щ„ userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Щ…Ш§ Щ†Щ€Ш№ Ш§Щ„Щ…ШЇШ®Щ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§Ш¶Ш§ЩЃШЄЩ‡Шџ"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… CUPS \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Ш§ШіШЄШ®ШЇЩ… ``%s'' ШЁШЇЩ„Ш§ Щ…Щ† Ш°Щ„Щѓ"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Ш§Щ„Щ†Щ€Ш№"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
 "\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„ШіЩ…Ш§Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁЩ…ШґШ§Ш±ЩѓШ© ШЁШ№Ш¶ Ш§Щ„ШЈШЇЩ„Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Щ…Шџ\n"
-"Ш§Щ„ШіЩ…Ш§Ш­ ШЁШ°Щ„Щѓ ШіЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁШЈЩ† ЩЉЩ†Щ‚Ш±Щ€Ш§ ШІШ± Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© ЩЃЩЉ ЩѓЩ€Щ†ЩѓЩЉЩ€Ш±Ш± Щ€ Щ†Щ€ШЄЩЉЩ„Щ€Ші.\n"
 "\n"
-"\"Щ…Ш®ШµШµ\" ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШ№Щ…Щ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш®Ш§Шµ Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ….\n"
+"ШЈЩЉШ¶Ш§Щ‹ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ‡ЩЉШ¦Ш© ШЁЩ…Щ„ЩЃШ§ШЄ PPD Щ…Щ† Щ…ШµЩ†Щ‘Ш№ЩЉЩ‡Ш§ ШЈЩ€ ШЁЩ…ШґШєЩ„Ш§ШЄ CUPS Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§ Щ„Ш§ "
+"ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„Щ‡Ш§."
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Ш§Щ„Ш­ШІЩ…Ш© Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉШ© %s Щ…ЩЃЩ‚Щ€ШЇШ©"
+msgid "Sri Lanka"
+msgstr "ШіШ±ЩЉЩ„Ш§Щ†ЩѓШ§"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr "ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШµШЇЩЉШ± ШЁШ§ШіШЄШ®ШЇШ§Щ… NFS ШЈЩ€ Samba. ШЈЩЉ Щ…Щ†Щ‡Щ…Ш§ ШЄШ±ЩЉШЇ"
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr ""
+"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
+"\n"
+"%s%s\n"
+"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Ш§Щ„Ш­ШІЩ…Ш© %s ЩЉШ¬ШЁ ШЈЩ† ШЄЩЏШ«ШЁЩ‘ШЄ. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§Шџ"
+msgid "Central African Republic"
+msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Щ€ШіШ· ШЈЩЃШ±ЩЉЩ‚ЩЉШ©"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Щ…Ш®ШµШµ"
+msgid "Gateway device"
+msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШЁЩ€Ш§ШЁШ©"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Allow all users"
-msgstr "Ш§ШіЩ…Ш­ Щ„ЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†"
+msgid "Net Method:"
+msgstr "Net Method:"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "No sharing"
-msgstr "Щ„Ш§ Щ…ШґШ§Ш±ЩѓШ©"
+msgid "Ethernetcard"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§ЩЉШ«Ш±Щ†ШЄ"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "More"
-msgstr "Ш§Щ„Щ…ШІЩЉШЇ"
+msgid "Parameters"
+msgstr "Parameters"
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Here is the full list of available countries"
-msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„ШЁЩ„Ш§ШЇ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid "Auto-detect"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please choose your country."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± ШЁЩ„ШЇЩѓ."
+msgid "Interface:"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©:"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Ш±ЩЉЩ€Щ†ЩЉЩ€Щ†"
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Country"
-msgstr "Ш§Щ„ШЁЩ„ШЇ"
+msgid "on CDROM"
+msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
 
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "All languages"
-msgstr "ЩѓЩ„ Ш§Щ„Щ„ШєШ§ШЄ"
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Щ„Ш§ ЩЉШЁШЇЩ€ ШЈЩ† Ш§Щ„Щ†ШёШ§Щ… Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"Ш­Ш§Щ€Щ„ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use Unicode by default"
-msgstr "Ш§ШіШЄШ®ШЇЩ… ЩЉЩ€Щ†ЩЉЩѓЩ€ШЇ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Щ€ШµЩ‘Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Щ„ЩЉЩ†ЩѓШі Щ€ Ш§Ш¬Ш№Щ„ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Windows ШЄШЄШµЩ„ ШЁЩ‡ ЩѓШ№Щ…Щ„Ш§ШЎ.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Щ…ШЄШ§ШЁШ№Ш© Ш§Ш№ШЇШ§ШЇ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩѓЩ…Ш§ ШЄЩЃШ№Щ„ Ш§Щ„ШўЩ†Шџ"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Ш±Щ€ШіЩЉШ§ Ш§Щ„ШЁЩЉШ¶Ш§ШЎ"
+
+#: ../../partition_table.pm:1
+#, c-format
+msgid "Error writing to file %s"
+msgstr "Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ЩѓШЄШ§ШЁШ© Ш§Щ„Щ‰ Ш§Щ„Щ…Щ„ЩЃ %s"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
-"ЩЉШЇШ№Щ… Mandrake Linux Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Щ„ШєШ§ШЄ. Ш§Ш®ШЄШ±\n"
-"Ш§Щ„Щ„ШєШ§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§. ШіШЄЩѓЩ€Щ† Щ‡Ш°Щ‡ Щ…ШЄЩ€ЩЃШ±Ш©Щ‹ Ш№Щ†ШЇ\n"
-"Ш§ЩѓШЄЩ…Ш§Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ€ Ш§Ш№ШЇШ§Ш© ШЄШґШєЩЉЩ„ Ш§Щ„Щ†ШёШ§Щ…."
+"ШЄЩЏШіШЄШ®ШЇЩ… apmd Щ„Щ…Ш±Ш§Щ‚ШЁШ© Ш­Ш§Щ„Ш© Ш§Щ„ШЁШ·Ш§Ш±ЩЉШ© Щ€ ШЄШіШ¬ЩЉЩ„Щ‡Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚ syslog.\n"
+"ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ШҐШєЩ„Ш§Щ‚ Ш§Щ„Ш¬Щ‡Ш§ШІ Ш№Щ†ШЇ Ш¶Ш№ЩЃ Ш§Щ„ШЁШ·Ш§Ш±ЩЉШ©."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose a language to use."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ„ШєШ© Ш§Щ„Ш§ШіШЄШ®ШЇШ§Щ…."
+msgid "Use tape to backup"
+msgstr "Ш§ШіШЄШ®Щ… Ш§Щ„ШґШ±ЩЉШ· Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Ш§Ш®ШЄШ± Щ…ШЇЩЉШ± Ш§Щ„Щ†Щ€Ш§ЩЃШ° Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡:"
+msgid "The following packages are going to be installed"
+msgstr "ШіЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉ:"
+msgid "CUPS configuration"
+msgstr "CUPS ШЄЩ‡ЩЉШ¦Ш©"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to use this feature?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©Шџ"
+msgid "Hong Kong"
+msgstr "Щ‡Щ€Щ†Ш¬ ЩѓЩ€Щ†Ш¬"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr "ЩЉЩ…ЩѓЩ† Ш§Ш№ШЇШ§ШЇ Ш¬Щ‡Ш§ШІЩѓ Щ„ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ ШўЩ„ЩЉШ§Щ‹ Щ„Щ…ШіШЄШ®ШЇЩ… Щ…Ш№ЩЉЩ†."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© Щ„Ш№Щ…Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Ш¬ШЇЩЉШЇШ©"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Autologin"
-msgstr "ШЇШ®Щ€Щ„ ШўЩ„ЩЉ"
+msgid "Moving"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Щ†Щ‚Щ„"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Icon"
-msgstr "ШЈЩЉЩ‚Щ€Щ†Ш©"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
+"\n"
+"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚ %s:\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Shell"
-msgstr "Ш§Щ„ШєЩ„Ш§ЩЃ"
+msgid "("
+msgstr "("
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Password (again)"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± (Ш«Ш§Щ†ЩЉШ©)"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓ ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©.\n"
+"\n"
+"Щ†Ш­Щ† Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ.\n"
+"Ш§Ш°Ш§ Щ„Щ… ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ, Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† Ш№Щ„Щ‰ Ш§Щ„ШµЩ†ШЇЩ€Щ‚.\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Password"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
+msgid ")"
+msgstr ")"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "User name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Lebanon"
+msgstr "Щ„ШЁЩ†Ш§Щ†"
 
-#: ../../any.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Real name"
-msgstr "Ш§Щ„Ш§ШіЩ… Ш§Щ„Ш­Щ‚ЩЉЩ‚ЩЉ"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Щ€Ш§ЩЃЩ‚ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Stop"
+msgstr "ШЄЩ€Щ‚ЩЃ"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Done"
-msgstr "Ш§Щ†ШЄЩ‡Щ‰"
+msgid "Edit selected host"
+msgstr "Ш­Ш±Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No CD device defined!"
+msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ№Ш±ЩЉЩЃ Ш¬Щ‡Ш§ШІ Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬!"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Ш§Щ„ШЁЩ„ШєШ§Ш±ЩЉШ© (ШµЩ€ШЄЩЉШ©)"
+
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "The DHCP start ip"
+msgstr "DHCP start ip"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
 
 #: ../../any.pm:1
 #, c-format
+msgid "Bootloader main options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©"
+
+#: ../../standalone.pm:1
+#, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
-"ШЈШЇШ®Щ„ Щ…ШіШЄШ®ШЇЩ…\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Add user"
-msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ®ШЇЩ…"
+msgid "Tape"
+msgstr "ШґШ±ЩЉШ· Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ…ЩЏШ¶Ш§ЩЃ Щ…ШіШЁЩ‚Ш§"
+msgid "Scanning network..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ…ШіШ­ Ш§Щ„ШґШЁЩѓШ©..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The user name is too long"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш·Щ€ЩЉЩ„ Ш¬ШЇШ§Щ‹"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
+"ШЁЩ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш± ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ±Ш¬Ш§Ш№ ШЈЩЉ Щ†ШіШ®Ш© Щ…Щ†\n"
+" ШЇЩ„ЩЉЩ„ /etc Ш§Щ„Ш®Ш§Шµ ШЁЩѓ."
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„Ш­Ш±Щ€ЩЃ Ш§Щ„ШµШєЩЉШ±Ш©, Ш§Щ„ШЈШ±Щ‚Ш§Щ…, `-' Щ€ `_'"
+msgid "Malaysia"
+msgstr "Щ…Ш§Щ„ЩЉШІЩЉШ§"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Ш±Ш¬Ш§ШЎЩ‹ Щ‚Щ… ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…"
+msgid "Swiss (French layout)"
+msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ© (ШЄШµЩ…ЩЉЩ… ЩЃШ±Щ†ШіЩЉ)"
 
-#: ../../any.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ‡Ш°Щ‡ ШЁШіЩЉШ·Ш© Ш¬ШЇШ§"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "ЩЃШґЩ„ mkraid (Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Ш­ШІЩ…Ш© raidtools Щ…ЩЃЩ‚Щ€ШЇШ©Шџ)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
+msgstr "ЩѓШ§Щ…ЩЉШ±Ш§ШЄ Ш§Щ„Щ€ЩЉШЁ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Ш­Ш¬Щ… (Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„Ш«Ш§Щ†ЩЉ)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Soundcard"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr "Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± \"%s <file>\".\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Ш±Ш¬Ш§ШЎ Ш¬Ш§Щ€Щ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰"
+msgid "Level %s\n"
+msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰ %s\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± ШєЩЉШ± Щ…ШЄШ·Ш§ШЁЩ‚Ш©"
+msgid "Luxembourg"
+msgstr "Щ„Щ€ЩѓШіЩ…ШЁЩ€Ш±Шє"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(ШЄЩ… Ш§Ш¶Ш§ЩЃШ© %s Щ…ШіШЁЩ‚Ш§)"
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+"                      ШЄЩ‚Ш±ЩЉШ± Щ…Ш±Ш§Щ‚ШЁ DrakBackup\n"
+"\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to compilation tools"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ Ш§Щ„ШЄШ¬Щ…ЩЉШ№"
+msgid "Iran"
+msgstr "Ш§ЩЉШ±Ш§Щ†"
 
-#: ../../any.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "access to network tools"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Bus"
+msgstr "Bus‏"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to administrative files"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШҐШЇШ§Ш±Ш©"
+msgid "Iraq"
+msgstr "Ш§Щ„Ш№Ш±Ш§Щ‚"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "allow \"su\""
-msgstr "Ш§ШіЩ…Ш­ ШЁЩЂ\"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr ""
+"ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЄШ№Ш§Ш±Ш¶ ЩЃЩЉ Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Ш§Щ„Щ…ШЁШЇШ¦ЩЉ ЩЃЩЉ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ЩЂ%s!\n"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to rpm tools"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ rpm"
+msgid "Configuring..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШ№ШЇШ§ШЇ..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to X programs"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ±Ш§Щ…Ш¬ X"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄЩ†ШµЩЉШЁ, Щ€ Щ‡Щ€ Щ…Щ…ЩѓЩ‘ЩЋЩ† Ш§Щ„ШўЩ†."
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"Щ‡Ш§ Щ‡Щ†Ш§ Ш§Щ„Щ…ШЇШ®Щ„Ш§ШЄ Ш§Щ„Щ…Ш®ШЄЩ„ЩЃШ©.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш¶Ш§ЩЃШ© Щ…ШЇШ®Щ„Ш§ШЄ ШЈШ®Ш±Щ‰ ШЈЩ€ ШЄШєЩЉЩЉШ± Ш§Щ„Щ…Щ€Ш¬Щ€ШЇЩЉЩ†."
+"Щ„ШЈШєЩ„ШЁ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ Ш§Щ„Ш­ШЇЩЉШ«Ш©, Щ€Ш­ШЇШ© bttv Щ„Щ†Щ€Ш§Ш© Щ„ЩЉЩ†ЩѓШі ЩЉЩ…ЩѓЩ†Щ‡Ш§ Ш§Щ„ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† "
+"Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ Ш§Щ„ШµШ­ЩЉШ­Ш©.\n"
+"Ш§Ш°Ш§ ШЄЩ… Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„ШЁШ·Ш§Щ‚Ш© ШЁШґЩѓЩ„ Ш®Ш§Ш·Ш¦, ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЇШ®Ш§Щ„ Ш§Щ„ШЄЩ€Щ†Ш± Щ€ Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµШ­ЩЉШ­ "
+"Щ‡Щ†Ш§. ЩЃЩ‚Ш· Ш§Ш®ШЄШ± Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©."
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (Windows...)"
+msgid "Password (again)"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± (Ш«Ш§Щ†ЩЉШ©)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (MacOS...)"
+msgid "Search installed fonts"
+msgstr "Ш§ШЁШ­Ш« ЩЃЩЉ Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ…Ш«ШЁШЄШ©"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (SunOS...)"
+msgid "Venezuela"
+msgstr "ЩЃЩЉЩ†ШІЩ€ЩЉЩ„Ш§"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Linux"
-msgstr "Щ„ЩЉЩ†ЩѓШі"
+msgid "IP address"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Щ…Ш§ Щ†Щ€Ш№ Ш§Щ„Щ…ШЇШ®Щ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§Ш¶Ш§ЩЃШЄЩ‡Шџ"
+msgid "Choose the sizes"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЈШ­Ш¬Ш§Щ…"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This label is already used"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Щ…ШіШЄШ®ШЇЩ…Ш© Щ…ШіШЁЩ‚Ш§"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
+"Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ЩЃШ§ШіШЇШ©:\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "You must specify a root partition"
-msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЄШ­ШЇЩЉШЇ ШЄЩ‚ШіЩЉЩ… Ш¬Ш°Ш±"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Ш§Щ„Щ…Щ€ШЇЩ… Щ„ШЇЩЉЩѓ ШєЩЉШ± Щ…ШЇШ№Щ€Щ… Щ…Щ† Ш§Щ„Щ†ШёШ§Щ….\n"
+"Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ http://www.linmodems.org"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You must specify a kernel image"
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЇШЇ ШµЩ€Ш±Ш© Ш§Щ„Щ†Щ€Ш§Ш©"
+msgid "Choose another partition"
+msgstr "ШҐШ®ШЄШ± ШґШ§ШґШ©"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "ШєЩЉШ± Щ…ШіЩ…Щ€Ш­ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш§ШЄ Ш§Щ„ЩЃШ§Ш±ШєШ©"
+msgid "Current user"
+msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш­Ш§Щ„ЩЉ"
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Default"
-msgstr "Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ"
+msgid "Username"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "NoVideo"
-msgstr "Щ„Ш§ ЩЃЩЉШЇЩЉЩ€"
+msgid "Left \"Windows\" key"
+msgstr "Щ…ЩЃШЄШ§Ш­ \"Windows\" Ш§Щ„ШЈЩЉШіШ±"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Initrd-size"
-msgstr "Ш­Ш¬Щ… Initrd"
+msgid "dhcpd Server Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… dhcpd"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Append"
-msgstr "Ш§Щ„Ш­Ш§Щ‚"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
+"ЩЉЩЏШіШЄШ®ШЇЩ… Щ„Щ„ШЇЩ„ЩЉЩ„:\n"
+" ЩЉЩ…ЩѓЩ† ЩЃЩ‚Ш· Щ„Щ…Ш§Щ„Щѓ Щ‡Ш°Ш§ Ш§Щ„ШЇЩ„ЩЉЩ„ ШЈЩ€ Ш§Щ„Щ…Щ„ЩЃ Ш§Щ„ШєШ§Ш¤Щ‡"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Label"
-msgstr "Ш№Щ†Щ€Ш§Щ†"
+msgid "Guyana"
+msgstr "ШєЩ€ЩЉШ§Щ†Ш§"
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Unsafe"
-msgstr "ШєЩЉШ± ШўЩ…Щ†"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… Novell \"%s\", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Table"
-msgstr "Ш§Щ„Ш¬ШЇЩ€Щ„"
+msgid "Remove a module"
+msgstr "Ш§ШІШ§Щ„Ш© Щ€Ш­ШЇШ©"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Password"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Advanced Configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ Щ…ШЄЩ‚ШЇЩ…"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Scanning on your HP multi-function device"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Щ…ШіШ­ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ HP Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
 
 #: ../../any.pm:1
 #, c-format
 msgid "Root"
 msgstr "Ш§Щ„Ш¬Ш°Ш±"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Щ„Щ„Щ‚Ш±Ш§ШЎШ© Щ€ Ш§Щ„ЩѓШЄШ§ШЁШ©"
+msgid "Choose an existing RAID to add to"
+msgstr "Ш§Ш®ШЄШ± RAID Щ…Щ€Ш¬Щ€ШЇ Щ„Щ„Ш§Ш¶Ш§ЩЃШ©"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Ш§Щ„ШЄШ±ЩѓЩЉШ© (Ш·Ш±Ш§ШІ \"Q\" Ш§Щ„Ш­ШЇЩЉШ«)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Video mode"
-msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
+msgid "Lilo message not found"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш±ШіШ§Щ„Ш© Lilo"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Image"
-msgstr "ШµЩ€Ш±Ш©"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Ш§Ш№Ш§ШЇШ© ШЄЩ€Щ„ЩЉШЇ ШўЩ„ЩЉШ© Щ„ШЄШ±Щ€ЩЉШіШ© Ш§Щ„Щ†Щ€Ш§Ш© ЩЃЩЉ ШЇЩ„ЩЉЩ„ /boot Щ„ЩЂ\n"
+"/usr/include/linux/{autoconf,version}.h"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Default OS?"
-msgstr "Щ†ШёШ§Щ… Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШџ"
+msgid "if needed"
+msgstr "Ш§Ш°Ш§ Ш§Ш­ШЄШ¬ШЄЩ‡"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Enable OF Boot?"
-msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ‚Щ„Ш§Ш№ OFШџ"
+msgid "Restore Failed..."
+msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©..."
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Enable CD Boot?"
-msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬Шџ"
+msgid "/Autodetect _jazz drives"
+msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† _ШіЩ€Ш§Щ‚Ш§ШЄ Jazz"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ†Щ€Ш§Ш©"
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Boot device"
-msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШіЩЉЩ†ЩЉ Щ„Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„ШЈШ№Щ„Щ‰\n"
+"Щ„ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Init Message"
-msgstr "Ш±ШіШ§Щ„Ш© Init"
+msgid "Current interface configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
 
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Bootloader to use"
-msgstr "Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…ЩЏШіШЄШ®ШЇЩ…"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Line Printer Daemon"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ISA, ЩЃШҐЩ† Ш§Щ„Щ‚ЩЉЩ… Ш§Щ„ШЄЩЉ ШіШЄШ№Ш±Ш¶ Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ© ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† "
+"ШµШ­ЩЉШ­Ш©.\n"
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© PCMCIA, ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШ№Ш±ЩЃ Щ‚ЩЉЩ… \"irq\" Щ€ \"io\" Ш§Щ„Ш®Ш§ШµШ© "
+"ШЁШЁШ·Ш§Щ‚ШЄЩѓ.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Ш®ЩЉШ§Ш± ``ШЄШґШЇЩЉШЇ Ш®ЩЉШ§Ш±Ш§ШЄ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±`` ШЁШЇЩ€Щ† Щ‚Ш§Ш¦ШЇШ© Щ…Щ† ШЇЩ€Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±"
+msgid "Do not print any test page"
+msgstr "Щ„Ш§ ШЄШ·ШЁШ№ ШЈЩЉ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Ш§ЩѓШЄШЁ Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Gurmukhi"
+msgstr "ШєЩ€Ш±Щ…Щ€ЩѓЩ‡ЩЉ"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Enable multiple profiles"
-msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШЄШґЩѓЩЉЩ„Ш§ШЄ Ш§Щ„Щ…ШЄШ№ШЇШЇШ©"
+msgid "Force No APIC"
+msgstr "Ш§Ш¬ШЁШ§Ш± Ш№Щ„Щ‰ Ш№ШЇЩ… Ш§ШіШЄШ®ШЇШ§Щ… APIC"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш§Щ„ШЇЩ‚ЩЉЩ‚ Ш№Щ†ШЇ Ш§Щ„Ш­Ш§Ш¬Ш© )ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ %d Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ("
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€ Щ‡Ш°Щ‡ Щ‚ШµЩЉШ±Ш© Ш¬ШЇШ§Щ‹ (ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† %d Ш±Щ…Щ€ШІ Ш№Щ„Щ‰ Ш§Щ„ШЈЩ‚Щ„)"
 
-#: ../../any.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Щ‚Щ… ШЁШЄЩ†ШёЩЉЩЃ /tmp Ш№Щ†ШЇ ЩѓЩ„ ШҐЩ‚Щ„Ш§Ш№"
+msgid "[keyboard]"
+msgstr "[keyboard]"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Create a bootdisk"
-msgstr "ШЈЩ†ШґШ¦ Щ‚Ш±Шµ ШҐЩ‚Щ„Ш§Ш№"
+msgid "FTP proxy"
+msgstr "ШЁШ±Щ€ЩѓШіЩЉ FTP"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "restrict"
-msgstr "ШЄШґШЇЩЉШЇ"
+msgid "Install List"
+msgstr "Ш«ШЁЩ‘ШЄ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "ШЄШґШЇЩЉШЇ Ш®ЩЉШ§Ш±Ш§ШЄ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"ШєЩЉЩ‘Ш±\n"
+"Щ…ШіШ§Ш± Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Force No APIC"
-msgstr "Ш§Ш¬ШЁШ§Ш± Ш№Щ„Щ‰ Ш№ШЇЩ… Ш§ШіШЄШ®ШЇШ§Щ… APIC"
+msgid "Show only for the selected day"
+msgstr "ШҐШ№Ш±Ш¶ ШіШ¬Щ„Ш§ШЄ Ш§Щ„ЩЉЩ€Щ… Ш§Щ„Щ…Ш®ШЄШ§Ш± ЩЃЩ‚Ш·"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Enable ACPI"
-msgstr "ШЄЩ…ЩѓЩЉЩ† ACPI"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "ШЄЩ€Щ‚ЩЉШЄ Щ…Ш§ Щ‚ШЁЩ„ Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШµЩ€Ш±Ш© Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©"
+msgid "512 kB"
+msgstr "512 ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "compact"
-msgstr "Щ…ШЇЩ…Ш¬"
+msgid "Logs"
+msgstr "Ш§Щ„ШіШ¬Щ„Ш§ШЄ"
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Compact"
-msgstr "Щ…ШЇЩ…Ш¬"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr "(Щ…Щ„Ш­Щ€ШёШ©: Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ© Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹)"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Bootloader installation"
-msgstr "ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ€Щ„ Щ…Щ† ШЄШ¬ШІШ¦Ш© Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "What kind of card do you have?"
+msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш© Щ„ШЇЩЉЩѓШџ"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ„ШЈЩ€Щ„ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ (MBR)"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
+msgid "Security"
+msgstr "Ш§Щ„ШЈЩ…Щ†"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "ШЄШ«ШЁЩЉШЄ LILO/grub"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Ш±ШіЩ€Щ…ЩЉ \"xpdq\" Щ„ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ€ Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ "
+"Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш©.\n"
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ№Щ…ШЁ ЩѓЩЉШЇЩЉ ЩѓШЁЩЉШ¦Ш© ШіШ·Ш­ Щ…ЩѓШЄШЁ ЩЃЩ„ШЇЩЉЩѓ ШЈЩЉЩ‚Щ€Щ†Ш© \"Щ„Щ„Ш·Щ€Ш§Ш±Ш¦\", Ш§ШіЩ…Щ‡Ш§ \"STOP "
+"Printer!\", ШЄЩ‚Щ€Щ… ШЁШҐЩЉЩ‚Ш§ЩЃ ЩѓЩ„ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЃЩ€Ш±Ш§Щ‹ Ш№Щ†ШЇ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„ЩЉЩ‡Ш§. Щ‡Ш°Ш§ Ш§Щ„Щ…Ш«Ш§Щ„ "
+"Щ…ЩЃЩЉШЇ Щ„Щ„Ш­Ш§Щ„Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ­ШµЩ„ ЩЃЩЉЩ‡Ш§ ШЄШ№Ш«Ш± ЩЃЩЉ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ€Ш±Щ‚.\n"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "SILO Installation"
-msgstr "ШЄШ«ШЁЩЉШЄ SILO"
+msgid "<control>Q"
+msgstr "<control>Q"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Skip"
-msgstr "ШЄШ®Ш·ЩЉ"
+msgid "Unknown"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "On Floppy"
-msgstr "Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Ш®Ш§ШЇЩ… Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "First sector of the root partition"
-msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ„ШЈЩ€Щ„ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ©"
+msgid "Network Configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
 msgstr ""
-"Щ„Щ‚ШЇ Щ‚Ш±Ш±ШЄ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш©.\n"
-"Щ‡Ш°Ш§ ЩЉШ№Щ†ЩЉ ШЈЩ†Щ‡ Щ„ШЇЩЉЩѓ Щ…Ш­Щ…Щ‘Щ„ ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Ш°ЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡ Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ (Щ…Ш«Ш§Щ„: System "
-"Commander).\n"
-"\n"
-"Ш№Щ„Щ‰ ШЈЩЉ Щ‚Ш±Шµ ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Щ„ШЁЩ‚ЩЉШ© Ш§Щ„Ш№Ш§Щ„Щ…\n"
+"Щ„Ш§ D-Channel (Ш®Ш·Щ€Ш· Щ…Ш¤Ш¬Ш±Ш©)"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№..."
+msgid "Option %s must be a number!"
+msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ…Ш§Щ‹!"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Insert a floppy in %s"
-msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃЩЉ %s"
+msgid "Notice"
+msgstr "Щ…Щ„Ш§Ш­ШёШ©"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Ш§Ш®ШЄШ± ШіЩ€Ш§Щ‚Ш© Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„Щ…Ш±Щ†Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„Ш№Щ…Щ„ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„Ш«Ш§Щ†ЩЉШ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "First floppy drive"
-msgstr "ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„ШЈЩ€Щ„Щ‰"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Щ„Щ… ШЄЩ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… X. Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ Ш°Щ„ЩѓШџ"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ШўШіЩЃ , Щ„Ш§ Щ…ШЇШ®Щ„ Щ…Ш±Щ† Щ…ШЄШ§Ш­"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШіЩЉШ№Щ…Щ„ ШЁШґЩѓЩ„ ШўЩ„ЩЉ. Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш·Ш§ШЁШ№ШЄЩѓ ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­ ШЈЩ€ Ш§Ш°Ш§ "
+"ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„ Ш§Ш№ШЇШ§ШЇ Щ…Ш®ШµШµ ШґШєЩ‘Щ„ \"ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©\"."
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "ШЈЩЉ Щ†Щ€Ш№ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш©Шџ"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
-"Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ ЩЉЩ€ЩЃШ± Ш·Ш±ЩЉЩ‚Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЇЩ€Щ†\n"
-"Ш§Щ„ШҐШ№ШЄЩ…Ш§ШЇ Ш№Щ„Щ‰ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„ШҐШ№ШЄЩЉШ§ШЇЩЉ. Щ‡Ш°Ш§ Щ…ЩЃЩЉШЇ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ\n"
-"LILO (ШЈЩ€ grub) Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШЈЩ€ Ш§Ш°Ш§ ШЈШІШ§Щ„ Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± LILO, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ€Ш§ЩЃЩ‚ "
-"LILO\n"
-"Щ…Ш№ ШЄЩ‡ЩЉШ¦Ш© Щ†ШёШ§Щ…Щѓ. ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ Щ…Ш№\n"
-"Mandrake rescue image, Щ…Щ…Ш§ ЩЉШ¬Ш№Щ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш© Щ…Щ† Ш§Щ†Щ‡ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Ш®Ш·ЩЉШ±Ш© ШЈЩѓШ«Ш± "
-"ШіЩ‡Щ€Щ„Ш©.\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш№Щ…Щ„ Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ„Щ†ШёШ§Щ…ЩѓШџ\n"
-"%s"
+"Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Ш±ШіЩ„Ш© Щ…Щ† FTP: %s\n"
+" "
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
+msgid "Interface"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
 "\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
 msgstr ""
+"options description:\n"
+"\n"
+" - Backup system files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User files: \n"
+"\n"
+"\tThis option allows you select all users that you want \n"
+"\tto backup.\n"
+"\tTo preserve disk space, it is recommended that you \n"
+"\tdo not include the web browser's cache.\n"
+"\n"
+" - Backup Other files: \n"
+"\n"
+"\tThis option allows you to add more data to save.\n"
+"\tWith the other backup it's not possible at the \n"
+"\tmoment to select incremental backup.\t\t\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful \n"
+"\toption for backup. This option allows you \n"
+"\tto backup all your data the first time, and \n"
+"\tonly the changed data afterward.\n"
+"\tThen you will be able, during the restore\n"
+"\tstep, to restore your data from a specified\n"
+"\tdate.\n"
+"\tIf you have not selected this option all\n"
+"\told backups are deleted before each backup.    \n"
 "\n"
 "\n"
-"(ШЄШ­Ш°ЩЉШ±! ШЈЩ†ШЄ ШЄШіШЄШ®ШЇЩ… XFS Щ„Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ©,\n"
-"Ш№Щ…Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ Щ‚ШЇ ЩЉЩЃШґЩ„ Ш№Щ„Щ‰ Ш§Щ„ШЈШ±Ш¬Ш­,\n"
-"Щ„ШЈЩ† XFS ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШґШєЩ„ ЩѓШЁЩЉШ± Ш§Щ„Ш­Ш¬Щ…)."
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ ЩЉЩ€ЩЃШ± Ш·Ш±ЩЉЩ‚Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЇЩ€Щ†\n"
-"Ш§Щ„ШҐШ№ШЄЩ…Ш§ШЇ Ш№Щ„Щ‰ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„ШҐШ№ШЄЩЉШ§ШЇЩЉ. Щ‡Ш°Ш§ Щ…ЩЃЩЉШЇ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ\n"
-"SILO Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШЈЩ€ Ш§Ш°Ш§ ШЈШІШ§Щ„ Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± LILO, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ€Ш§ЩЃЩ‚ SILO\n"
-"Щ…Ш№ ШЄЩ‡ЩЉШ¦Ш© Щ†ШёШ§Щ…Щѓ. ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ Щ…Ш№\n"
-"Mandrake rescue image, Щ…Щ…Ш§ ЩЉШ¬Ш№Щ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш© Щ…Щ† Ш§Щ†Щ‡ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Ш®Ш·ЩЉШ±Ш© ШЈЩѓШ«Ш± "
-"ШіЩ‡Щ€Щ„Ш©.\n"
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ„Щ†ШёШ§Щ…Щѓ, ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©\n"
-"Ш§Щ„ШЈЩ€Щ„Щ‰ Щ€ Ш§Ш¶ШєШ· \"Щ…Щ€Ш§ЩЃЩ‚\"."
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s\n"
+msgid "comma separated strings"
+msgstr "Ш­Ш±ЩЃЩЉШ§ШЄ Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Щ€ ЩѓШ§ЩЃЩЉШ© ЩЃЩЉ /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr "ШЄЩ€Ш¬ШЇ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Щ…Щ†Щ‡Ш§:"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+msgid "Messages"
+msgstr "Ш§Щ„Ш±ШіШ§Ш¦Щ„"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|CPH06X (bt878) [Щ…ШµЩ†Ш№Щ€Щ† ЩѓШ«ЩЉШ±Щ€Щ†]"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+msgid "POP and IMAP Server"
+msgstr "Ш®Ш§ШЇЩ… POP Щ€ IMAP"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+msgid "Mexico"
+msgstr "Ш§Щ„Щ…ЩѓШіЩЉЩѓ"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+msgid "Model stepping"
+msgstr "Model stepping"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Ш±Щ€Ш§Щ†ШЇШ§"
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Щ‡Щ„ Щ„ШЇЩЉЩѓ ШЈЩЉ Щ€Ш§Ш¬Щ‡Ш§ШЄ %sШџ"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO Щ…Ш№ Щ‚Ш§Ш¦Щ…Ш© Щ†ШµЩЉШ©"
+msgid "Switzerland"
+msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ©"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO Щ…Ш№ Щ‚Ш§Ш¦Щ…Ш© Ш±ШіЩ€Щ…ЩЉШ©"
+msgid "Brunei Darussalam"
+msgstr "ШіЩ„Ш·Щ†Ш© ШЁШ±Щ€Щ†Ш§ЩЉ"
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© lpd Ш§Щ„ШЁШ№ЩЉШЇ"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
 
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "consolehelper missing"
-msgstr "consolehelper missing"
+msgid "Configure Internet Access..."
+msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ..."
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "kdesu missing"
+msgid "Norway"
+msgstr "Ш§Щ„Щ†Ш±Щ€ЩЉШ¬"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "ШіШЄЩѓЩ€Щ† Щ„Щ‚Ш·Ш§ШЄ Ш§Щ„ШґШ§ШґШ© Щ…Щ€Ш¬Щ€ШЇШ© ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ %s"
+msgid "Danish"
+msgstr "Ш§Щ„ШЇЩ†Щ…Ш§Ш±ЩѓЩЉШ©"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ ШєЩ…Щ„ Щ„Щ‚Ш·Ш§ШЄ Щ„Щ„ШґШ§ШґШ© Щ‚ШЁЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"ШЄЩ‚Щ€Щ… ШЁШЄШґШєЩЉЩ„ Щ…ЩЃШЄШ§Ш­ numlock ШўЩ„ЩЉШ§Щ‹ ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±\n"
+"Щ€ XFree Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d Ш«Щ€Ш§Щ†"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ ШЄЩ‡ЩЉШ¦Ш© IP Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©.\n"
+"ЩѓЩ„ Щ…Ш§ШЇШ© ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„Щ‡Ш§ ЩѓШ№Щ†Щ€Ш§Щ† IP ШЁШґЩѓЩ„ Щ…Щ†Щ‚Щ€Ш·\n"
+"(Щ…Ш«Щ„Ш§Щ‹, 1.2.3.4)."
 
-#: ../../common.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "1 minute"
-msgstr "ШЇЩ‚ЩЉЩ‚Ш© Щ€Ш§Ш­ШЇШ©"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"ШЄШ«ШЁЩЉШЄ Mandrake Linux Щ…Щ€ШІШ№ Ш№Щ„Щ‰ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЈЩ‚Ш±Ш§Шµ. DrakX\n"
+"ЩЉШ№Щ„Щ… ШҐШ°Ш§ ЩѓШ§Щ†ШЄ Ш­ШІЩ…Ш© Щ…Ш§ ЩЃЩЉ Щ‚Ш±Шµ ШўШ®Ш± Щ€ ШіЩЉШ®Ш±Ш¬ Ш§Щ„Щ‚Ш±Шµ\n"
+"Ш§Щ„Ш­Ш§Щ„ЩЉ Щ€ ШіЩЉШ·Щ„ШЁ Щ…Щ†Щѓ ШЈЩ† ШЄШЇШ®Щ„ Щ‚Ш±ШµШ§Щ‹ Щ…Ш®ШЄЩ„ЩЃШ§ ЩѓЩ…Ш§ Щ‡Щ€ Щ…Ш·Щ„Щ€ШЁ."
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d ШЇЩ‚Ш§Ш¦Щ‚"
+msgid "Processors"
+msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TB"
-msgstr "ШЄЩЉШ±Ш§ШЁШ§ЩЉШЄ"
+msgid "Bulgaria"
+msgstr "ШЁЩ„ШєШ§Ш±ЩЉШ§"
 
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "GB"
-msgstr "ШєЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "No NIC selected!"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± NIC!"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MB"
-msgstr "Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Ш¬ШІШ± ШіЩЃШ§Щ„ШЁШ§Ш±ШЇ Щ€ Ш¬Ш§Щ† Щ…Ш§ЩЉЩ†"
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "KB"
-msgstr "ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"ШёЩ‡Ш±ШЄ Щ…ШґШ§ЩѓЩ„ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
+"Ш§Ш®ШЄШЁШ± Ш§Щ„Щ€ШµЩ„Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… net_monitor ШЈЩ€ mcc. Ш§Ш°Ш§ Щ„Щ… ШЄШ№Щ…Щ„ Ш§Щ„Щ€ШµЩ„Ш©, ЩЃЩ‚ШЇ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© "
+"Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©."
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "United States"
-msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©"
+msgid "partition %s is now known as %s"
+msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш© %s Щ…Ш№Ш±Щ€ЩЃШ© Ш§Щ„ШўЩ† ШЁШ§Щ„ШҐШіЩ… %s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Austria"
-msgstr "Ш§Щ„Щ†Щ…ШіШ§"
+msgid "Backup Other files..."
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ ШЈШ®Ш±Щ‰..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Italy"
-msgstr "ШҐЩЉШ·Ш§Щ„ЩЉШ§"
+msgid "SMB server IP"
+msgstr "IP Ш®Ш§ШЇЩ… SMB"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Netherlands"
-msgstr "Щ‡Щ€Щ„Щ†ШЇШ§"
+msgid "Congo (Kinshasa)"
+msgstr "Ш§Щ„ЩѓЩ€Щ†ШєЩ€ ЩѓЩЉЩ†ШґШ§ШіШ§"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sweden"
-msgstr "Ш§Щ„ШіЩ€ЩЉШЇ"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Ш¬ШЇЩ€Щ„ Ш§ШЄШЄЩ‚ШіЩЉЩ… Щ„Щ„Щ‚Ш±Шµ %s ШіЩЉШЄЩ… ЩѓШЄШ§ШЁШЄЩ‡ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ!"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Norway"
-msgstr "Ш§Щ„Щ†Ш±Щ€ЩЉШ¬"
+msgid "Installing HPOJ package..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш­ШІЩ…Ш© HPOJ..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Greece"
-msgstr "Ш§Щ„ЩЉЩ€Щ†Ш§Щ†"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ ЩЉЩ€ЩЃШ± Ш·Ш±ЩЉЩ‚Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЇЩ€Щ†\n"
+"Ш§Щ„ШҐШ№ШЄЩ…Ш§ШЇ Ш№Щ„Щ‰ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„ШҐШ№ШЄЩЉШ§ШЇЩЉ. Щ‡Ш°Ш§ Щ…ЩЃЩЉШЇ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ\n"
+"LILO (ШЈЩ€ grub) Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШЈЩ€ Ш§Ш°Ш§ ШЈШІШ§Щ„ Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± LILO, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ€Ш§ЩЃЩ‚ "
+"LILO\n"
+"Щ…Ш№ ШЄЩ‡ЩЉШ¦Ш© Щ†ШёШ§Щ…Щѓ. ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ Щ…Ш№\n"
+"Mandrake rescue image, Щ…Щ…Ш§ ЩЉШ¬Ш№Щ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш© Щ…Щ† Ш§Щ†Щ‡ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Ш®Ш·ЩЉШ±Ш© ШЈЩѓШ«Ш± "
+"ШіЩ‡Щ€Щ„Ш©.\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш№Щ…Щ„ Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ„Щ†ШёШ§Щ…ЩѓШџ\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Germany"
-msgstr "ШЈЩ„Щ…Ш§Щ†ЩЉШ§"
+msgid ", USB printer \\#%s"
+msgstr ", Ш·Ш§ШЁШ№Ш© USB \\#%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Ш§Щ„ШЄШґЩЉЩѓ"
+msgid "Latvian"
+msgstr "Ш§Щ„Щ„Ш§ШЄЩЃЩЉШ©"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Belgium"
-msgstr "ШЁЩ„Ш¬ЩЉЩѓШ§"
+msgid "monthly"
+msgstr "ШґЩ‡Ш±ЩЉШ§"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "France"
-msgstr "ЩЃШ±Щ†ШіШ§"
+msgid "Module name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ€Ш­ШЇШ©"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Costa Rica"
-msgstr "ЩѓЩ€ШіШЄШ§Ш±ЩЉЩѓШ§"
+msgid "Start at boot"
+msgstr "Ш§ШЁШЇШЈ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental Backups"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШЄШ±Ш§ЩѓЩ…ЩЉ (Щ„Ш§ ШЄШіШЄШЁШЇЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ‚ШЇЩЉЩ…Ш©)"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr " ЩЃШЄШ­Ш© Ш§Щ„Ш®Ш·ШҐ  %s Щ„Щ„ЩѓШЄШ§ШЁШ© :%s"
+msgid "First sector of drive (MBR)"
+msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ„ШЈЩ€Щ„ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ (MBR)"
 
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Nothing to do"
-msgstr "Щ„Ш§ ШґЩЉШ¦ Щ„Щ„Ш№Щ…Щ„"
+msgid "Joystick"
+msgstr "Ш№ШµШ§ Ш§Щ„ШЈЩ„Ш№Ш§ШЁ"
 
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ„Щ„ШЄШ­ШЇЩЉШЇ Ш§Щ„ШўЩ„ЩЉ"
+msgid "El Salvador"
+msgstr "Ш§Щ„ШіЩ„ЩЃШ§ШЇЩ€Ш±"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Щ…Ш±Щ…Щ‘ШІ Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s"
+msgid "Use Unicode by default"
+msgstr "Ш§ШіШЄШ®ШЇЩ… ЩЉЩ€Щ†ЩЉЩѓЩ€ШЇ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr ""
-"ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Ш­Щ‚ЩЉЩ‚ЩЉ (ext2/ext3, resierfs, xfs, ШЈЩ€ jfs) Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ "
-"Щ‡Ш°Щ‡\n"
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr "Щ€Ш­ШЇШ© Щ†Щ€Ш§Ш© Щ„ЩЉЩ†ЩѓШі Ш§Щ„ШЄЩЉ ШЄШЄШ№Ш§Щ…Щ„ Щ…Ш№ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„ШЇЩ„ЩЉЩ„ ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† ЩЃЩЉ Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш¬Ш°Ш±ЩЉ"
+msgid "Trying to rescue partition table"
+msgstr "Ш¬Ш§Ш±ЩЉ Щ…Ш­Ш§Щ€Щ„Ш© Ш§Щ†Щ‚Ш§Ш° Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… LVM Logical Volume Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s"
+msgid "Option %s must be an integer number!"
+msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ…Ш§ ШµШ­ЩЉШ­Ш§Щ‹!"
 
-#: ../../fsedit.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Щ„Щ‚ШЇ Ш§Ш®ШЄШ±ШЄ ШЄШ¬ШІШ¦Ш© RAID ШЁШ±Щ…Ш¬ЩЉШ© ЩѓШЄШ¬ШІШ¦Ш© Ш¬Ш°Ш±ЩЉШ© (/).\n"
-"Щ„Ш§ ЩЉШіШЄШ·ЩЉШ№ ШЈЩЉ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ Ш°Щ„Щѓ ШЁШЇЩ€Щ† ШЄШ¬ШІШ¦Ш© /boot.\n"
-"ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Ш§Ш¶Ш§ЩЃШ© ШЄШ¬ШІШ¦Ш© /boot"
+"Entries you'll have to fill:\n"
+"%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Щ‡Щ†Ш§Щѓ ШЄШ¬ШІШ¦Ш© Щ…Ш№ Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s Щ…ШіШЁЩ‚Ш§Щ‹\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† ШЁШЇШЎ Ш§Щ„ШЄШ±Щ‚ЩЉШ© Ш§Щ„Ш­ЩЉШ© !!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Щ†Щ‚Ш§ Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„Ш­Ш±Щ€ЩЃ Щ€/ШЈЩ€ Ш§Щ„ШўШ±Щ‚Ш§Щ…"
+msgid "Name: "
+msgstr "Ш§Щ„Ш§ШіЩ…: "
 
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ШЄШЁШЇШЈ Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© /"
+msgid "16 million colors (24 bits)"
+msgstr "16 Щ…Щ„ЩЉЩ€Щ† Щ„Щ€Щ† (24 ШЁШЄ)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… ReiserFS Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ ШЈШµШєШ± Щ…Щ† 32 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Allow all users"
+msgstr "Ш§ШіЩ…Ш­ Щ„ЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†"
 
-#: ../../fsedit.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… JFS Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ ШЈШµШєШ± Щ…Щ† 16 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "The official MandrakeSoft Store"
+msgstr "Щ…ШЄШ¬Ш± MandrakeSoft Ш§Щ„Ш±ШіЩ…ЩЉ"
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Щ€ШµЩ„Ш© ЩѓЩЉШЁЩ„"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "User"
+msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
 #: ../../fsedit.pm:1
 #, c-format
@@ -975,1001 +1783,257 @@ msgstr ""
 "\n"
 "Щ‡Щ„ ШЈЩ†ШЄ Щ…Щ€Ш§ЩЃЩ‚ Ш№Щ„Щ‰ Ш®ШіШ§Ш±Ш© ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄШџ\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Ш®Ш·ШЈ"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr "Щ‚Щ… ШЁЩ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ Ш¬ШЇЩЉШЇ ЩЃШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© (ЩЃЩ‚Ш· Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ…ШЄШЇШ±Ш¬Ш©)"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "server"
-msgstr "Ш®Ш§ШЇЩ…"
+msgid "Printer on parallel port \\#%s"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "with /usr"
-msgstr "Щ…Ш№ /usr"
+msgid "Name"
+msgstr "Ш§Щ„Ш§ШіЩ…"
 
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "simple"
-msgstr "ШЁШіЩЉШ·"
+msgid "mkraid failed"
+msgstr "ЩЃШґЩ„ mkraid"
 
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Enabling swap partition %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ…ЩѓЩЉЩ† ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„ %s"
+msgid "Button 3 Emulation"
+msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± 3"
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "Ш®Ш·ШЈ ЩЃЩЉ Ш§ШІШ§Щ„Ш© ШЄШ­Щ…ЩЉЩ„ %s: %s"
+msgid "Sending files..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ..."
 
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "ЩЃШґЩ„ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s ЩЃЩЉ Ш§Щ„ШЇЩ„ЩЉЩ„ %s"
+msgid "Israeli (Phonetic)"
+msgstr "Ш§Щ„Ш№ШЁШ±ЩЉШ© (ШµЩ€ШЄЩЉШ©)"
 
-# y, c-format
-#: ../../fs.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mounting partition %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
+msgid "access to rpm tools"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ rpm"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Checking %s"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† %s"
+msgid "edit"
+msgstr "Ш­Ш±Щ‘Ш±"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„/Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш§ШЁШ№Ш©/Ш¬Щ‡Ш§ШІ"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ€ ШЄШ¬Щ‡ЩЉШІ Ш§Щ„Щ…Щ„ЩЃ %s"
+msgid "Permission problem accessing CD."
+msgstr "ШЄЩ€Ш¬ШЇ Щ…ШґЩѓЩ„Ш© ЩЃЩЉ Ш§Щ„ШЄШµШ±ЩЉШ­ Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬."
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Щ„Ш§ ШЈШ№Ш±ЩЃ ЩѓЩЉЩЃ ШЈШ¬Щ‡ШІ %s ЩЃЩЉ Ш§Щ„Щ†Щ€Ш№ %s"
+msgid "Phone number"
+msgstr "Ш±Щ‚Щ… Ш§Щ„ШЄЩ‘Щ„ЩЉЩЃЩ€Щ† "
 
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s ШЄШ¬Щ‡ЩЉШІ %s Щ‚ШЇ ЩЃШґЩ„"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Ш®Ш·ШЈ: Щ…ШґШєЩ„ \"%s\" Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Ш§Ш¶ШєШ· \"Ш§Щ„ШЄШ§Щ„ЩЉ ->\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃ ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ\n"
-"Ш§Щ„ШµЩ„ШЁ. Ш®Ш° Ш­Ш°Ш±Щѓ, ШЁШ№ШЇ Щ†Щ‚Ш±Щѓ Щ„ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ ->\" Щ„Щ† ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш§ШіШЄШ№Ш§ШЇШ©\n"
-"ШЈЩЉ ШЁЩЉШ§Щ†Ш§ШЄ ШЈЩ€ ШЄШ¬ШІШ¦Ш§ШЄ ЩѓШ§Щ†ШЄ Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ.\n"
-"ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ ШЁЩЉШ§Щ†Ш§ШЄ Windows\n"
-"Ш§Щ†Щ‚Ш± \"<- Ш§Щ„ШіШ§ШЁЩ‚\" Щ„ШҐЩЉЩ‚Ш§ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© ШЇЩ€Щ† Ш®ШіШ§Ш±Ш© ШЈЩЉ ШЁЩЉШ§Щ†Ш§ШЄ ШЈЩ€ ШЄШ¬ШІШ¦Ш§ШЄ\n"
-"Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ."
+msgid "Printer name, description, location"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Щ€ШµЩЃ, Ш§Щ„Щ…ЩѓШ§Щ†"
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Ш§Ш®ШЄШ± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Щ…Ш­Щ€Щ‡ Щ„ШЄШ«ШЁЩЉШЄ ШЄШ¬ШІШ¦Ш©\n"
-"Mandrake Linux Ш§Щ„Ш¬ШЇЩЉШЇШ©. Ш®Ш° Ш­Ш°Ш±Щѓ, ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Ш№Щ„ЩЉЩ‡ ШіШЄШ¶ЩЉШ№\n"
-"Щ€ Щ„Щ† ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Ш§!"
+msgid "USA (broadcast)"
+msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш© (broadcast)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
 msgstr ""
+"Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ±\n"
+"Щ€ШіЩЉШ· Ш§Щ„Щ†ШіШ® Ш§Щ„Ш§Ш­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-"\"ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ\": Ш§Ш°Ш§ ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШіЩЉШЄЩ… Ш№Ш±Ш¶Щ‡Ш§\n"
-"Щ‡Щ†Ш§. Ш§Ш°Ш§ Щ„Ш§Ш­ШёШЄ ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Щ…Ш№Ш±Щ€Ш¶Ш© Щ‡Щ†Ш§ Щ„ЩЉШіШЄ ШЄЩ„Щѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©\n"
-"ЩЃШ№Щ„Ш§Щ‹ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ Ш§Щ„ШІШ± Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„\n"
-"ШўШ®Ш±."
+msgid "Use Xinerama extension"
+msgstr "Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ…ШЄШЇШ§ШЇ Xinerama"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"ШЄШ№Ш°Ш± ШєЩ„Щ‚ mkbootdisk: \n"
+" %s \n"
+" %s"
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"ШіЩЉЩ‚Щ€Щ… DrakX ШЈЩ€?Щ‹ ШЁШ§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Щ€Ш¬Щ€ШЇ ШЈШ¬Щ‡ШІШ© IDE Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±. ШіЩЉЩ‚Щ€Щ…\n"
-"ШЈЩЉШ¶Ш§Щ‹ ШЁШ§Щ„ШЁШ­Ш« Ш№Щ† ШЁШ·Ш§Щ‚Ш§ШЄ PCI SCSI Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ. Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш©\n"
-"SCSI,ШіЩЉЩ‚Щ€Щ… DrakX ШЁШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Щ…Щ†Ш§ШіШЁ ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉШ§Щ‹.\n"
-"\n"
-"Щ€ ?Щ† Ш№Щ…Щ„ЩЉШ© Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ Щ„ЩЉШіШЄ Ш®Ш§Щ„ЩЉШ© Щ…Щ† Ш§?Ш®Ш·Ш§ШЎ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШіШ¤Ш§Щ„Щѓ Ш№Щ…Щ‘Ш§ "
-"Ш§Ш°Ш§\n"
-"ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© PCI SCSI. Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ \"Щ†Ш№Щ…\" ШіЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШЁШ·Ш§Щ‚Ш§ШЄ SCSI\n"
-"Щ„ШЄШ®ШЄШ§Ш± Щ…Щ†Щ‡Ш§. Ш§Щ†Щ‚Ш± \"?\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ№Щ„Щ… ШЈЩ†Щ‡ ? ШЄЩ€Ш¬ШЇ ШЁШ·Ш§Щ‚Ш§ШЄ SCSI Ш№Щ„Щ‰\n"
-"Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§Щ‹, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§\n"
-"Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Ш®ШЄЩЉШ§Ш± \"Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ\" Щ€ Щ†Щ‚Ш±\n"
-"\"Ш§Щ„ШЄШ§Щ„ЩЉ->\". ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш«Щ… Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ\n"
-"->\" Щ„Щ„Ш№Щ€ШЇШ© Ш§Щ„Щ‰ ШґШ¤Ш§Щ„ Щ€Ш§Ш¬Щ‡Ш© SCSI.\n"
-"\n"
-"Ш§Ш°Ш§ Ш§Ш¶Ш·Ш±Ш±ШЄ Ш§Щ„Щ‰ ШЄШ­ШЇЩЉШЇ Щ…Щ€Ш§Ш¦Щ… PCI SCSI ЩЉШЇЩ€ЩЉШ§Щ‹, ЩЃШіЩЉШіШЈЩ„Щѓ DrakX Ш№Щ…Щ‘Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ\n"
-"ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§. ЩЉШ¬ШЁ ШЈЩ† ШЄШіЩ…Ш­ Щ„ЩЂ DrakX ШЁШЈЩ† ЩЉШЄШ­Щ‚Щ‚ Щ…Щ†\n"
-"Ш§Щ„Ш№ШЄШ§ШЇ Щ„Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„ШЁШ·Ш§Щ‚Ш© Щ€ Ш§Щ„ШЄЩЉ ЩЉЩЊЩЏШ­ШЄШ§Ш¬ Ш§Щ„ЩЉЩ‡Ш§ Щ„ЩЉШЄЩ… ШЁШЇШЎ\n"
-"Ш№Щ…Щ„ Ш§Щ„ШЁШ·Ш§Щ‚Ш©. ЩЃЩЉ ШЈШєЩ„ШЁ Ш§?Щ€Щ‚Ш§ШЄ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШ§Щ„Ш®Ш·Щ€Ш© ШЇЩ€Щ† ШЈЩЉ\n"
-"Щ…ШґШ§ЩѓЩ„.\n"
-"\n"
-"Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ…ЩѓЩ† DrakX Щ…Щ† Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉШ©Щ„ШЄЩ…Ш±ЩЉШ±Щ‡Ш§\n"
-"Ш§Щ„Щ‰ Ш§Щ„Ш№ШЄШ§ШЇ, ЩЃЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш©\n"
-"Ш§Щ„Щ…ШґШєЩ‘Щ„ ЩЉШЇЩ€ЩЉШ§Щ‹."
+msgid "West Europe"
+msgstr "ШЈЩ€Ш±Щ€ШЁЩ‘Ш§ Ш§Щ„ШєШ±ШЁЩЉЩ‘Ш©"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
-"Ш§?Щ†, Ш­Ш§Щ† Щ€Щ‚ШЄ Ш§Ш®ШЄЩЉШ§Ш± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ„Щ†ШёШ§Щ…Щѓ. ШЄЩ€ЩЃШ± ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰\n"
-"Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© Щ€Ш§Ш­ШЇ, Щ„ЩѓЩ† Mandrake Linux ЩЉЩ€ЩЃШ± Щ„Щѓ Щ†ШёШ§Щ…ЩЉЩ†. ЩѓЩ„ Щ†ШёШ§Щ… Щ…Щ†Ш§ШіШЁ\n"
-"Щ„Щ†Щ€Шє Щ…Ш№ЩЉЩ† Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©.\n"
-"\n"
-" * \"pdq\"--Щ€ Щ‡Щ€ Ш§Ш®ШЄШµШ§Ш± Щ„ЩЂ``print, don't queue'' ШЈЩЉ ``Ш§Ш·ШЁШ№ Щ€ ? ШЄШµЩЃ'', Щ‡Ш°Ш§ Щ‡Щ€ "
-"Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш© ШЁШ§Щ„Ш·Ш§ШЁШ№Ш©, Щ€ ШЄШ±ЩЉШЇ ШЄЩЃШ§ШЇЩЉ ШЈЩЉ Ш§Ш±ШЄШЁШ§Щѓ ЩЃЩЉ Ш§Щ„Ш·Ш§ШЁШ№Ш©\n"
-"Щ€ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©.(ЩЉЩ‚Щ€Щ… \"pdq\" ШЁШ§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ Ш­Ш§?ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЁШіЩЉШ·Ш©\n"
-"Щ€ ЩЉШ№ЩЉШЁЩ‡ Ш§Щ„ШЁШ·Ш¦ Ш№Щ†ШЇ Ш§?ШіШЄШ®ШЇШ§Щ… Щ…Ш№ Ш§Щ„ШґШЁЩѓШ§ШЄ). Щ…Щ† Ш§?ЩЃШ¶Щ„ ШЈЩ† ШЄШіШЄШ®ШЇЩ… \"pdq\" Ш§Ш°Ш§.\n"
-"ЩѓШ§Щ†ШЄ Щ‡Ш°Щ‡ ШЄШ¬Ш±ШЁШЄЩѓ Ш§?Щ€Щ„Щ‰ Щ…Ш№ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі.\n"
-"\n"
-" * \"CUPS\" - ``Common UNIX Printing System'', Щ‡Щ€ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
-"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш·Ш§ШЁШ№ШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ€ Ш­ШЄЩ‰ Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш© ЩЃЩЉ Ш§Щ„Щ†ШµЩЃ Ш§?Ш®Ш± Щ…Щ† Ш§Щ„ЩѓЩ€ЩѓШЁ. Ш§Щ†Щ‡\n"
-"ШіЩ‡Щ„ Ш§?Ш№ШЇШ§ШЇ Щ€ ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉШЄШµШ±ЩЃ ЩѓШ®Ш§ШЇЩ… ШЈЩ€ ЩѓШ№Щ…ЩЉЩ„ ?Щ†ШёЩ…Ш© Ш·ШЁШ§Ш№Ш© \"lpd\"\n"
-"Ш§Щ„Щ‚ШЇЩЉЩ…Ш©, Щ„Ш°Ш§ ЩЃШҐЩ†Щ‡ Щ…ШЄЩ€Ш§ЩЃЩ‚ Щ…Ш№ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ‚ШЇЩЉЩ…Ш©\n"
-"Ш§Щ„ШЄЩЉ ? ШЄШІШ§Щ„ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш©.ШЁЩЉЩ†Щ…Ш§ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШіЩ‡Щ„Ш©\n"
-"Щ€ Щ‚Щ€ЩЉШ© Щ…Ш«Щ„ \"pdq\". Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Ш­Ш§ЩѓШ§Ш© Ш®Ш§ШЇЩ… \"lpd\", ШЄШЈЩѓШЇ\n"
-"Щ…Щ† ШЄШґШєЩЉЩ„ Щ…Ш±Ш§Щ‚ШЁ \"cups-lpd\". ЩЉШ­ШЄЩ€ЩЉ CUPS Ш№Щ„Щ‰ Щ€Ш§Ш¬Щ‡Ш§ШЄ\n"
-"Ш±ШіЩ€Щ…ЩЉШ© Щ„Щ„Ш·ШЁШ§Ш№Ш© ШЈЩ€ Ш§Ш®ШЄЩЉШ§Ш± Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ ШҐШЇШ§Ш±Ш©\n"
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"Ш§Ш°Ш§ Щ‚Щ…ШЄ ЩЉШЄЩ‚Ш±ЩЉШ± Ш§Ш®ШЄЩЉШ§Ш±Щѓ Ш§?Щ†, Ш«Щ… Щ„Щ… ЩЉШ№Ш¬ШЁЩѓ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©\n"
-"ЩЃЩЉЩ…Ш§ ШЁШ№ШЇ, ЩЉЩ…ЩѓЩ†Щѓ ШЄШєЩЉЩЉШ±Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЄШґШєЩЉЩ„ PrinterDrake Щ…Щ† Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake\n"
-"Щ€ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ ШІШ± Ш§Щ„Ш®ШЁЩЉШ±."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 Ш§Щ„ШҐШµШЇШ§Ш± %s"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"ШЁШ№ШЇЩ…Ш§ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш№Ш§Щ…?ШЄ Ш§Щ„Ш№Ш§Щ…Ш© Щ„Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, ЩЃШіЩЉШЄЩ…\n"
-"Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§?Щ‚Щ„Ш§Ш№ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ ШЈЩ†ШёЩ…Ш© ШЄШґШєЩЉЩ„ ШЈШ®Ш±Щ‰ Щ…Ш«ШЁШЄШ© Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ ЩЃШіЩЉШЄЩ… Ш§Ш¶Ш§ЩЃШЄЩ‡Ш§\n"
-"ШўЩ„ЩЉШ§Щ‹ Ш§Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© Ш§?Щ‚Щ„Ш§Ш№. ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ­ЩѓЩ… ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ\n"
-"Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ШЁЩ†Щ‚Ш± \"Ш§Ш¶ЩЃ\" ?Щ†ШґШ§ШЎ Щ…ШЇШ®Щ„ Ш¬ШЇЩЉШЇ, Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШЇШ®Щ„ Щ€\n"
-"Щ†Щ‚Ш± \"ШЄШ№ШЇЩЉЩ„\" ШЈЩ€ \"Ш­Ш°ЩЃ\" Щ„ШЄШ№ШЇЩЉЩ„ ШЈЩ€ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ®Щ„. \"Щ…Щ€Ш§ЩЃЩ‚\" ЩЉШЄШЈЩѓШЇ\n"
-"Щ…Щ† ШЄШєЩЉЩЉШ±Ш§ШЄЩѓ.\n"
-"\n"
-"Ш±ШЁЩ…Ш§ ? ШЄШ±ЩЉШЇ ?ЩЉ ШґШ®Шµ ЩЉШЄЩ…ЩѓЩ† Щ…Щ† Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ЩЉШіШЄШ·ЩЉШ№\n"
-"Ш§Щ„Щ€ШµЩ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰. ЩЉЩ…ЩѓЩ†Щѓ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ§Ш®Щ„ Ш§Щ„Щ…Щ‚Ш§ШЁЩ„Ш©\n"
-"?Щ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Щ„Ш­Ш°ЩЃЩ‡Ш§ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, Щ„ЩѓЩ† ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш© ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‚Ш±Шµ\n"
-"Щ…Ш±Щ† Щ„Щ„ШҐЩ‚?Ш№ ЩѓЩЉ ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш©\n"
-"Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰!"
+msgid "Copying %s"
+msgstr "Ш¬Ш§Ш±ЩЉ Щ†ШіШ® %s"
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "ШҐШ®ШЄШ± Ш§Щ„Щ„Щ€Щ†"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-"Щ‡Ш°Щ‡ Щ‡ЩЉ ШЈЩ‡Щ… Ш®Ш·Щ€Ш© ШЄШЄШ®Ш°Щ‡Ш§ ?Щ…Щ† Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ\n"
-"ШЁЩѓ: Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\" (root) Щ€ Щ‡Щ€\n"
-"Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ… Щ€ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Щ€Ш­ЩЉШЇ Ш§Щ„Щ…Ш®Щ€Щ„ ШЁШЄШ­ШЇЩЉШ« Ш§Щ„Щ†ШёШ§Щ…, Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†,\n"
-"ШЄШєЩЉЩЉШ± ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ…, Ш§Щ„Ш®. ШЁШ§Ш®ШЄШµШ§Ш± ЩЉЩ…ЩѓЩ† Щ„Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\" ШЈЩ† ЩЉЩЃШ№Щ„\n"
-"ЩѓЩ„ ШґШ¦! Щ„Ш°Ш§ Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ШµШ№ШЁШ©\n"
-"Ш§Щ„ШЄШ®Щ…ЩЉЩ† - ШіЩЉШ®ШЁШ±Щѓ DrakX Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ ШіЩ‡Щ„Ш©. ЩѓЩ…Ш§\n"
-"ШЄШ±Щ‰, Щ„ШіШЄ Щ…Ш¬ШЁШ±Ш§Щ‹ Ш№Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±, Щ„ЩѓЩ†Щ†Ш§ Щ†Щ†ШµШ­ ШЁШґШЇШ© ?Щ† Ш§Ш­ШЄЩ…Ш§Щ„ Ш­ШЇЩ€Ш«\n"
-"ШЈШ®Ш·Ш§ШЎ Щ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш№Ш§ШЇЩЉ Щ…Ш«Щ„ ШЁШ§Щ‚ЩЉ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰. Щ€ ШЁЩ…Ш§ ШЈЩ† \"Ш§Щ„Ш¬Ш°Ш±\" ЩЉЩ…ЩѓЩ†Щ‡\n"
-"ШЄШ№ШЇЩЉ ЩѓЩ„ Ш§Щ„Ш­ШЇЩ€ШЇ Щ€ Щ‚ШЇ ЩЉШ­Ш°ЩЃ ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Щ…Щ† ШЇЩ€Щ† Щ‚ШµШЇ, Щ„Ш°Ш§ ЩЃЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…Щ†\n"
-"Ш§Щ„ШµШ№ШЁ ШЈЩ† ШЄШµШЁШ­ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\".\n"
-"\n"
-"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш®Щ„ЩЉШ·Ш§Щ‹ Щ…Щ† Ш§Щ„Ш­Ш±Щ€ЩЃ Щ€ Ш§?Ш±Щ‚Ш§Щ… ЩѓЩ…Ш§ ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЄЩ€ЩЉ\n"
-"Ш№Щ„Щ‰ 8 Ш­Ш±Щ€ЩЃ Ш№Щ„Щ‰ Ш§?Щ‚Щ„. ? ШЄЩѓШЄШЁ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± \"Ш§Щ„Ш¬Ш°Ш±\" Ш№Щ„Щ‰ Щ€Ш±Щ‚ -- Щ‡Ш°Ш§ ЩЉШіЩ‡Щ‘Щ„\n"
-"Ш§Ш®ШЄШ±Ш§Щ‚ Ш§Щ„Щ†ШёШ§Щ… Ш§Ш°Ш§ Ш±ШЈЩ‰ ШЈШ­ШЇ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±.\n"
-"\n"
-"Щ†ШµЩЉШ­Ш© ШЈШ®Ш±Щ‰ -- ? ШЄШ¬Ш№Щ„ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш·Щ€ЩЉЩ„Ш© Ш¬ШЇШ§Щ‹ ШЈЩ€ Щ…Ш№Щ‚Щ‘ШЇШ© ?Щ†Щѓ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ†\n"
-"Щ‚Ш§ШЇШ±Ш§Щ‹ Ш№Щ„Щ‰ ШЄШ°ЩѓШ±Щ‡Ш§!\n"
-"\n"
-"Щ„Щ† ЩЉШЄЩ… Ш№Ш±Ш¶ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ©. Щ„ШЄЩ‚Щ„ЩЉЩ„ ЩЃШ±ШµШ© Ш­ШЇЩ€Ш«\n"
-"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ЩѓШЄШ§ШЁШ©, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ…Ш±ШЄЩЉЩ†.\n"
-"Ш§Ш°Ш§ ШЈШ®Ш·ШЈШЄ ЩЃЩЉ Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩЉ Ш§Щ„Щ…Ш±ШЄЩЉЩ†, ЩЃШіЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ… ЩѓЩ„Щ…Ш©\n"
-"Ш§Щ„Щ…Ш±Щ€Ш± \"Ш§Щ„Ш®Ш§Ш·Ш¦Ш©\" ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§?Щ€Щ„Щ‰ Ш§Щ„ШЄЩЉ ШЄШЇШ®Щ„ ЩЃЩЉЩ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ….\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ„ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­ЩѓЩ… ШЁЩѓ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-"Ш®Ш§ШЇЩ… Щ…ШµШ§ШЇЩ‚Ш©, Ш§Ш¶ШєШ· ШІШ± \"Щ…ШЄЩ‚ШЇЩ…\".\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШґШЁЩѓШЄЩѓ ШЄШіШЄШ®ШЇЩ… LDAP, NIS, ШЈЩ€ PDC Windows Domain Authentication "
-"Services\n"
-"Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®ЩЉШ§Ш± Ш§Щ„Щ…Щ†Ш§ШіШЁ ЩѓЩЂ\"Щ…ШµШ§ШЇЩ‚Ш©\". Ш§Ш°Ш§ Щ„Щ… ШЄШ№Щ„Щ… ШЈЩЉ Щ…Щ†Щ‡Ш§ ШЄШ±ЩЉШЇ\n"
-"Ш§ШіШЄШ®ШЇШ§Щ…Щ‡, Ш§ШіШЈЩ„ Щ…ШЇЩЉШ± Ш§Щ„ШґШЁЩѓШ© Щ„ШЇЩЉЩѓ.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ…ШґЩѓЩ„Ш© ЩЃЩЉ ШЄШ°ЩѓШ± ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш±, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±\n"
-"\"? ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±\" Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ…ШЄШµЩ„Ш§Щ‹ ШЁШ§?Щ†ШЄШ±Щ†ШЄ,\n"
-"ШЈЩ€ ШЈЩ†Щѓ ШЄШ«Щ‚ ЩЃЩЉ Ш§Щ„Щ„Ш°ЩЉЩ† ЩЉШЇШ®Щ„Щ€Щ† Ш§Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ…."
+msgid "Dominican Republic"
+msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Ш§Щ„ШЇЩ€Щ…ЩЉЩ†ЩЉЩѓШ§Щ†"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШµШ­ЩЉШ­. Щ…Ш«Щ„Ш§Щ‹ Щ„Щ…Щ†ЩЃШ° \"COM1\" ЩЃЩЉ\n"
-"Windows Ш§ШіЩ…Щ‡ \"ttys0\" ЩЃЩЉ Щ„ЩЉЩ†ЩѓШі."
+msgid "Swaziland"
+msgstr "ШіЩ€Ш§ШІЩЉЩ„Ш§Щ†ШЇ"
 
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Set-UID"
+msgstr "Set-UID"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Щ„ШєШ© Ш§Щ„Щ…ЩЃШ¶Щ„Ш© ШіЩЉШ¤Ш«Ш± Ш№Щ„Щ‰ Щ„ШєШ© Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ©\n"
-"Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ€ Ш§Щ„Щ†ШёШ§Щ… ШЁШґЩѓЩ„ Ш№Ш§Щ…. ШЈЩ€?Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШЄЩЉ\n"
-"ШЄШЄЩ€Ш§Ш¬ШЇ ЩЃЩЉЩ‡Ш§, Ш«Щ… Ш§Щ„Щ„ШєШ© Ш§Щ„ШЄЩЉ ШЄШЄШ­ШЇШ« ШЁЩ‡Ш§.\n"
-"\n"
-"Ш¶ШєШ· ШІШ± \"Щ…ШЄЩ‚ШЇЩ…\" ШіЩЉШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш± Щ„ШєШ§ШЄ\n"
-"ШЈШ®Ш±Щ‰ Щ„ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄЩ‡Ш§ Ш№Щ„Щ‰ Щ…Ш­Ш·Ш© Ш§Щ„Ш№Щ…Щ„ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ,Щ€ Щ…Щ† Ш«Щ…\n"
-"ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„Щ„ШєШ§ШЄ Щ„Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ© Щ€ Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ, Щ…Ш«Щ„Ш§Щ‹\n"
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШіШЄШіШЄШ¶ЩЉЩЃ Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Щ…Щ† ШЈШіШЁШ§Щ†ЩЉШ§ Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ, Ш§Ш®ШЄШ± Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ©\n"
-"ЩѓЩ„ШєШ© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© ЩЃЩЉ Ш§Щ„Щ†Щ…Ш· Ш§Щ„ШґШ¬Ш±ЩЉ Щ€ \"Ш§?ШіШЁШ§Щ†ЩЉШ©\" ЩЃЩЉ Ш§Щ„Щ‚ШіЩ…\n"
-"Ш§Щ„Щ…ШЄЩ‚ШЇЩ….\n"
-"?Ш­Шё ШЈЩ†Щѓ Щ„ШіШЄ Щ…Щ‚ЩЉШЇШ§Щ‹ ШЁШ§Ш®ШЄЩЉШ§Ш± Щ„ШєШ© Щ€Ш§Ш­ШЇШ© Ш§Ш¶Ш§ЩЃЩЉШ©. Ш­Ш§Щ„\n"
-"Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©, Ш§Ш¶ШєШ· ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ ->\"\n"
-"Щ„Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
-"\n"
-"Щ„Щ„ШЄШєЩЉЩЉШ± ШЁЩЉЩ† Ш§Щ„Щ„ШєШ§ШЄ Ш§Щ„Щ…ШЄШ№ШЇШЇШ© Ш§Щ„Щ…Ш«ШЁШЄШ© Ш№Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ…, ЩЉЩ…ЩѓЩ†Щѓ\n"
-"ШЄШґШєЩЉЩ„ Ш§?Щ…Ш± \"/usr/sbin/localedrake\"ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± Щ„ШЄШєЩЉЩЉШ±\n"
-"Ш§Щ„Щ„ШєШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Щ†ШёШ§Щ… ЩѓЩѓЩ„. ШЄШґШєЩЉЩ„ Ш§?Щ…Ш± ЩѓЩ…ШіШЄШ®ШЇЩ… Ш№Ш§ШЇЩЉ\n"
-"ШіЩЉШєЩЉШ± ЩЃЩ‚Ш· Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ„ШєШ© Щ„Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЃЩ‚Ш·."
+msgid "Please check if you are using CDRW media"
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Щ€ШіЩЉШ· CDRW"
 
 #: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
-"Ш§Ш№ШЄЩ…Ш§ШЇШ§Щ‹ Ш№Щ„Щ‰ Ш§Щ„Щ„ШєШ© Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§ ЩЃЩЉ Щ‡Ш°Ш§ Ш§Щ„Щ‚ШіЩ…, ШіЩЉЩ‚Щ€Щ… DrakX\n"
-"ШЁШ§Ш®ШЄЩЉШ§Ш± ШЄЩ‡ЩЉШ¦Ш© Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШўЩ„ЩЉШ§Щ‹. Ш№Щ…Щ€Щ…Ш§Щ‹,\n"
-"Ш±ШЁЩ…Ш§ Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ‚Ш§ШЁЩ„Ш© ШЁШґЩѓЩ„ Щ…ШЁШ§ШґШ± Щ„Щ„ШєШЄЩѓ:\n"
-"Щ…Ш«Щ„Ш§Щ‹ Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Ш№Ш±ШЁЩЉШ§Щ‹ Щ…ШЄЩѓЩ„Щ…Ш§Щ‹ ШЁШ§Щ„Щ„ШєШ© Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ©, Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ\n"
-"Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ ШіЩ€ЩЉШіШ±ЩЉШ©. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШЄЩѓЩ„Щ… Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ© Щ„ЩѓЩ† Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ ЩѓЩЉШЁЩѓ, Ш±ШЁЩ…Ш§\n"
-"ШЄШ¬ШЇ Щ†ЩЃШіЩѓ ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ…Щ€Щ‚ЩЃ Ш­ЩЉШ« ? ШЄШЄШ·Ш§ШЁЩ‚ Щ„ШєШЄЩѓ Щ…Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­.\n"
-"ЩЃЩЉ Ш§Щ„Ш­Ш§Щ„ШЄЩЉЩ†, ШіШЄШіЩ…Ш­ Щ„Щѓ Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ ШіШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш±\n"
-"Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ†Ш§ШіШЁШ© Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©.\n"
-"\n"
-"Ш§Щ†Щ‚Ш± ШІШ± \"Ш§Щ„Щ…ШІЩЉШЇ\" Щ„Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­\n"
-"Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш©.\n"
-"\n"
-"Ш§Ш°Ш§ Ш§Ш®ШЄШ±ШЄ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ„Ш­Ш±Щ€ЩЃ ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©, ЩЃШіЩЉШіЩ…Ш­ Щ„Щѓ\n"
-"Щ…Ш±ШЁШ№ Ш§Щ„Ш­Щ€Ш§Ш± Ш§Щ„ШЄШ§Щ„ЩЉ ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Ш®ШЄШµШ§Ш±Ш§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄЩЉ\n"
-"ШіШЄШєЩЉШ± Щ€Ш¶Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШЁЩЉЩ† Ш§Щ„Ш­Ш±Щ€ЩЃ Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉШ© Щ€ Ш§Щ„ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©."
+"Ш§Ш®ШЄШ± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Щ…Ш­Щ€Щ‡ Щ„ШЄШ«ШЁЩЉШЄ ШЄШ¬ШІШ¦Ш©\n"
+"Mandrake Linux Ш§Щ„Ш¬ШЇЩЉШЇШ©. Ш®Ш° Ш­Ш°Ш±Щѓ, ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Ш№Щ„ЩЉЩ‡ ШіШЄШ¶ЩЉШ№\n"
+"Щ€ Щ„Щ† ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Ш§!"
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
-"ЩЉШЄЩ… ШЄЩ†ШґЩЉШ· Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш·Щ€Ш© ЩЃЩ‚Ш· Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЄШ¬ШІШ¦Ш© Щ„ЩЉЩ†ЩѓШі Щ‚ШЇЩЉЩ…Ш©\n"
-"Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ.\n"
-"\n"
-"ЩЉШ­ШЄШ§Ш¬ DrakX Ш§?Щ† Ш§Щ„Щ‰ ШЈЩ† ЩЉШ№Щ„Щ… Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† Ш§Щ„ШµЩЃШ± ШЈЩ€\n"
-"ШЄШ±ЩЉШЇ ШЄШ±Щ‚ЩЉШ© Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Щ„ШЇЩЉЩѓ Щ…ШіШЁЩ‚Ш§Щ‹:\n"
-"\n"
-" * \"ШЄШ«ШЁЩЉШЄ\": ЩЃЩЉ Ш§?ШєЩ„ШЁ ШЄЩ‚Щ€Щ… ШЁШ§ШІШ§Щ„Ш© Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Щ‚ШЇЩЉЩ…\n"
-"ЩѓЩ„ЩЉШ§Щ‹. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШєЩЉЩЉШ± ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ, ШЈЩ€ ШЄШ±ЩЉШЇ\n"
-"ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ, Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±. Ш№Щ…Щ€Щ…Ш§Щ‹ Ш§Ш№ШЄЩ…Ш§ШЇШ§\n"
-"Ш№Щ„Щ‰ ЩѓЩЉЩЃЩЉШ© ШЄШ¬ШІШ¦Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„ШЇЩЉЩѓ. ЩЉЩ…ЩѓЩ†Щѓ Щ…Щ†Ш№ Ш§ШІШ§Щ„Ш© ШЁШ№Ш¶\n"
-"ШЁЩЉШ§Щ†Ш§ШЄЩѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹.\n"
-" * \"ШЄШ±Щ‚ЩЉШ©\": ЩЃШ¦Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄШ­ШЇЩЉШ« Ш§Щ„Ш­ШІЩ…\n"
-"Ш№Щ„Щ‰ Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Щ„Щ† ЩЉШЄЩ… ШЄШєЩЉЩЉШ±\n"
-"ШЁЩЉШ§Щ†Ш§ШЄЩѓ ШЈЩ€ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ. ШЈШєЩ„ШЁ Ш®Ш·Щ€Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§?Ш®Ш±Щ‰\n"
-"Щ„Ш§ ШЄШІШ§Щ„ Щ…Щ€Ш¬Щ€ШЇШ©, Щ…Ш«Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш§Ш№ШЄЩЉШ§ШЇЩЉ.\n"
-"\n"
-"Ш§ШіШЄШ®ШЇШ§Щ… Ш®ЩЉШ§Ш± ``Ш§Щ„ШЄШ±Щ‚ЩЉШ©'' ЩЉШ¬ШЁ ШЈЩ† ЩЉШ№Щ…Щ„ ШЁШґЩѓЩ„ Ш¬ЩЉШЇ Ш№Щ„Щ‰\n"
-"Ш§ШµШЇШ§Ш±Ш§ШЄ Mandrake Linux \"8.1\" ШЈЩ€ Щ…Ш§ ЩЃЩ€Щ‚. ? ЩЉЩ†ШµШ­ ШЁШ§Щ„ШЄШ±Щ‚ЩЉШ©\n"
-"Щ…Щ† Ш§ШµШ§ШЇШ±Ш§ШЄ Mandrake Linux Щ‚ШЁЩ„ \"8.1\"."
+msgid " on parallel port \\#%s"
+msgstr " Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-"\"Ш§Щ„ШЁЩ„ШЇ\": ШЄШЈЩѓШЇ Щ…Щ† Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШЁЩ„ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ЩЃЩЉ Щ‡Ш°Ш§\n"
-"Ш§Щ„ШЁЩ„ШЇ, Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"ШЄЩ‡ЩЉШ¦Ш©\" Щ€ Ш§Ш®ШЄШ± ШЁЩ„ШЇШ§Щ‹ ШўШ®Ш±. Ш§Ш°Ш§ Щ„Щѓ ШЄЩѓЩ†\n"
-"ШЁЩ„ШЇЩѓ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Ш¶ШєШ· ШІШ± \"Ш§Щ„Щ…ШІЩЉШЇ\" Щ„ШҐШёЩ‡Ш± Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш©\n"
-"ШЁШ§Щ„ШЁЩ„ШЇШ§Щ†."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Generic 2 Button Mouse"
 
-#: ../../help.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "Ш§Ш­Ш°ЩЃ logical volumes ШЈЩ€Щ„Ш§Щ‹\n"
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"Ш№Щ†ШЇ Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш·Ш©, ШіЩЉШіЩ…Ш­ Щ„Щѓ DrakX ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш§Щ„Ш°ЩЉ ШЄШ±ШєШЁ ШЁЩ‡\n"
-"Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©. ШЁШЇЩЉЩ‡ЩЉШ§Щ‹, ЩЉШ¬ШЁ ШЄШ№ЩЉЩЉЩ† Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ\n"
-"Ш№Ш§Щ„ЩЌ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Щ‡Ш§Щ…Ш©, ШЈЩ€ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©\n"
-"ШіШЄЩЏШіШЄШ®ШЇЩ… Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ. Ш§Щ† Ш§ШіШЄШ®ШЇШ§Щ… Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ЩЉШЈШЄЩЉ\n"
-"Ш№Ш§ШЇШ© Ш№Щ„Щ‰ Ш­ШіШ§ШЁ ШіЩ‡Щ€Щ„Ш© Ш§Щ„ШҐШіШЄШ®ШЇШ§Щ….\n"
-"\n"
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Щ„ШҐШ®ШЄЩЉШ§Ш±, Ш§Ш­ЩЃШё Ш§Щ„Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ."
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
 
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
-"ЩЃЩЉ Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Ш°ЩЉ ШЄЩ‚Щ€Щ… ЩЃЩЉЩ‡ ШЁШЄШ«ШЁЩЉШЄ Mandrake Linux, Щ‚ШЇ ЩЉЩѓЩ€Щ† ШЄЩ… ШЄШ­ШЇЩЉШ«\n"
-"ШЁШ№Ш¶ Ш§Щ„Ш­ШІЩ… Щ…Щ†Ш° Ш§?ШµШЇШ§Ш± Ш§Щ„Щ…ШЁШЇШ¦ЩЉ, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ШЄЩ… Ш§ШµЩ„Ш§Ш­ ШЁШ№Ш¶ Ш§Щ„Ш№ЩЉЩ€ШЁ\n"
-"ШЈЩ€ ШЄЩ… Ш­Щ„ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Ш§?Щ…Щ†ЩЉШ©. Щ„ЩѓЩЉ ШЄШіШЄЩЃЩЉШЇ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ,ЩЉЩ…ЩѓЩ†Щѓ\n"
-"Ш§?Щ† ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ Ш№ШЁШ± Ш§?Щ†ШЄШ±Щ†ШЄ. Ш§Ш®ШЄШ±\n"
-"\"Щ†Ш№Щ…\" Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ Ш№Ш§Щ…Щ„Ш©, ШЈЩ€ \"?\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„\n"
-"ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ ?Ш­Щ‚Ш§Щ‹.\n"
-"\n"
-"Ш§Ш®ШЄЩЉШ§Ш± \"Щ†Ш№Щ…\" ЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§?Щ…Ш§ЩѓЩ† Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† Щ…Щ†Щ‡Ш§ Ш§Щ„Ш­ШµЩ€Щ„\n"
-"Ш№Щ„Щ‰ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ. Ш§Ш®ШЄШ± Ш§Щ„Щ…ЩѓШ§Щ† Ш§Щ„ШЈЩ‚Ш±ШЁ Ш§Щ„ЩЉЩѓ. ШіЩЉШЄЩ… Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш­ШІЩ…\n"
-"Ш±Ш§Ш¬Ш№ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ, Ш«Щ… Ш§Ш¶ШєШ· \"Ш«ШЁЩ‘ШЄ\" Щ„ШЄЩ†ШІЩЉЩ„ Щ€ ШЄШ«ШЁЩЉШЄ\n"
-"Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©, ШЈЩ€ \"Ш§Щ„ШєШ§ШЎ\" ?Ш­ШЁШ§Ш· Ш§Щ„ШЄШ­ШЇЩЉШ«."
+"ШЄШ№Ш°Ш±ШЄ ЩѓШЄШ§ШЁШ© /etc/sysconfig/bootsplash\n"
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ…Щ„ЩЃ."
 
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
+"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШµШ§ШЇЩЉ Щ„Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ\n"
+"ШЁШ№ШЇШЇ Ш§Щ„Ш­Ш±Щ€ЩЃ"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
+"Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"Щ‚Ш§Ш¦Щ…Ш© "
+"Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©\"."
 
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
+msgid "Enabling servers..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш®Щ€Ш§ШЇЩ…..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш·ШЁШ§Ш№Ш© Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ©..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Щ‡Щ†Ш§Щѓ ШЄШ¬ШІШ¦Ш© Щ…Ш№ Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s Щ…ШіШЁЩ‚Ш§Щ‹\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
 "At this point, you need to decide where you want to install the Mandrake\n"
 "Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -1987,51 +2051,49 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 "ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш·Ш©, Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄЩ‚Ш±Ш± ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ†ШёШ§Щ…\n"
 "Ш§Щ„ШЄШґШєЩЉЩ„ Mandrake Linux Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\n"
@@ -2092,231 +2154,138 @@ msgstr ""
 "Ш±Ш§Ш¬Ш№ Щ‚ШіЩ… ``Ш§ШЇШ§Ш±Ш© Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ'' ЩЃЩЉ\n"
 "``ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШЁШЄШЇШ¦''."
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"ЩЃЩЉ Ш§Щ„Щ†Щ‡Ш§ЩЉШ©, ШіЩЉШЄЩ… ШіШ¤Ш§Щ„Щѓ Ш№Щ† Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЁШЇШЎ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©\n"
-"Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„Щ†ШёШ§Щ…. Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ ШіЩЉШЄЩ… ШіШ¤Ш§Щ„Щѓ Щ‡Ш°Ш§ Ш§Щ„ШіШ¤Ш§Щ„ Ш­ШЄЩ‰ Щ„Щ€ Ш§Ш®ШЄШ±ШЄ Ш№ШЇЩ… Ш§Ш®ШЄШЁШ§Ш±\n"
-"Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, ШЁЩѓЩ„ Щ€Ш¶Щ€Ш­, ШіШЄШ®ШЄШ§Ш± \"Щ„Ш§\" Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ ШіШЄШіШЄШ®ШЇЩ… ЩѓШ¬Щ‡Ш§ШІ\n"
-"Ш®Ш§ШЇЩ…, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ШЄЩ†Ш¬Ш­ ЩЃЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№Ш±Ш¶\n"
-"ШЁШґЩѓЩ„ ШµШ­ЩЉШ­."
+msgid "Ukraine"
+msgstr "ШЈЩ€ЩѓШ±Ш§Щ†ЩЉШ§"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Ш®Ш§ШЇЩ…Ш§ШЄ Щ…Ш®ШЄЩ„ЩЃШ© Щ„Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ, Щ…Ш№ ШЈЩ€\n"
-"ШЇЩ€Щ† ШЄШіШ±ЩЉШ№ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Ш°ЩЉ\n"
-"ЩЉЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ."
+msgid "Application:"
+msgstr "Ш§Щ„ШЄШ·ШЁЩЉЩ‚:"
 
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
-"ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶\n"
-"\n"
-"   ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ€ Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ† ЩЃЩЉ Ш§Щ„Ш­ШЇЩ€ШЇ\n"
-"Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш№ШЄШ§ШЇ. Ш§Ш®ШЄШ± ШЄЩ„Щѓ Ш§Щ„ШЄЩЉ ШЄЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ (Щ„Ш§ ШЄШІШ§Щ„\n"
-"ШЄШіШЄШ·ЩЉШ№ ШЄШєЩЉЩЉШ± ШЄЩ„Щѓ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ). ЩЉШЄЩ… Ш№Ш±Ш¶ Ш№ЩЉЩ†Ш©\n"
-"Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ©."
+msgid "External ISDN modem"
+msgstr "Щ…Щ€ШЇЩ… ISDN Ш®Ш§Ш±Ш¬ЩЉ"
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
-"Ш§Щ„ШґШ§ШґШ©\n"
-"\n"
-"   ЩЉЩ…ЩѓЩ† Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§ЩѓШЄШґШ§ЩЃ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШ§ШґШ© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†ШЄЩѓ\n"
-"ШўЩ„ЩЉШ§Щ‹. Ш§Щ† Щ„Щ… ЩЉШµЩ„ Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄЩЉ Щ„ШЇЩЉЩѓ\n"
-"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©."
+msgid "if set to yes, report check result by mail."
+msgstr "if set to yes, report check result by mail."
 
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Ш§Ш®ШЄЩЉШ§Ш±Щѓ  ? (default %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr "Ш­Щ„ Ш§Щ„Щ…ШґШ§ЩѓЩ„"
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Ш±ЩЉЩ€Щ†ЩЉЩ€Щ†"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
-"Monitor\n"
 "\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
-"Resolution\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
 msgstr ""
-"ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ…\n"
-"\n"
-"   ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЉЩ‚Щ€Щ… ШЁШ§ЩѓШЄШґШ§ЩЃ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ\n"
-"ШЁШґЩѓЩ„ ШўЩ„ЩЉ. Ш§Щ† Щ„Щ… ЩЉШ­ШµЩ„ Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩЉ Щ„ШЇЩЉЩѓ ШЁШ§Щ„ЩЃШ№Щ„\n"
-"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©.\n"
+"ШЄЩ… Ш§Ш±ШіШ§Щ„ Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Ш­ШЄЩ‰ ШЄШЁШЇШЈ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"Ш­Ш§Щ„Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш©:\n"
+"%s\n"
 "\n"
-"   ЩЃЩЉ Ш­Ш§Щ„ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Ш®Ш§ШЇЩ…Ш§ШЄ Ш±ШіЩ€Щ…ЩЉШ© Щ…Ш®ШЄЩ„ЩЃШ© Щ„ШЁШ·Ш§Щ‚ШЄЩѓ, Щ…Ш№ ШЈЩ€ ШЁШЇЩ€Щ†\n"
-"ШЄШіШ±ЩЉШ№ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ, ЩЉЩ…ЩѓЩ†Щѓ ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Ш°ЩЉ\n"
-"ЩЉЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ ШЈЩѓШ«Ш±."
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
-"ЩЉЩ‚Щ€Щ… Щ„ЩЉЩ†ЩѓШі ШЁШҐШЇШ§Ш±Ш© Ш§Щ„Щ€Щ‚ШЄ Ш­ШіШЁ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ Ш«Щ… ЩЉШЄШ±Ш¬Щ…Щ‡ Ш§Щ„Щ‰\n"
-"Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ Ш­ШіШЁ Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШІЩ…Щ†ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§. Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„ШіШ§Ш№Ш©\n"
-"Ш§Щ„ШЄЩЉ ЩЃЩЉ Ш§Щ„Щ„Щ€Ш­Ш© Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ© Щ…Ш¶ШЁЩ€Ш·Ш© Ш№Щ„Щ‰ Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ, ЩЉЩ…ЩѓЩ†Щѓ Ш§ШІШ§Щ„Ш© ШЄЩ†ШґЩЉШ· Ш°Щ„Щѓ\n"
-"Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† \"ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш¶ШЁЩ€ШёШ© Ш№Щ„Щ‰ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ\" Щ€ Ш§Щ„ШЄЩЉ "
-"ШіШЄШ¬Ш№Щ„\n"
-"Щ„ЩЉЩ†ЩѓШі ЩЉШ№Щ„Щ… ШЈЩ† ШіШ§Ш№Ш© Ш§Щ„Щ†ШёШ§Щ… Щ€ ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Ш№Щ„Щ‰ Щ†ЩЃШі Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ. Щ‡Ш°Ш§\n"
-"Щ…ЩЃЩЉШЇ Ш№Щ†ШЇЩ…Ш§ ШЄШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± Щ…Ш«Щ„ Windows.\n"
-"\n"
-"Ш®ЩЉШ§Ш± \"ШЄШІШ§Щ…Щ† ШўЩ„ЩЉ Щ„Щ„Щ€Щ‚ШЄ\" ШіЩЉЩ‚Щ€Щ… ШўЩ„ЩЉШ§Щ‹ ШЁШ¶ШЁШ· Ш§Щ„ШіШ§Ш№Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-"Ш§?ШЄШµШ§Щ„ ШЁШ®Ш§ШЇЩ… Щ€Щ‚ШЄ ШЁШ№ЩЉШЇ Ш№Щ„Щ‰ Ш§?Щ†ШЄШ±Щ†ШЄ. ЩѓЩЉ ШЄШ№Щ…Щ„ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©,\n"
-"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ Ш№Ш§Щ…Щ„Ш©. Щ…Щ† Ш§?ЩЃШ¶Щ„ Ш§Ш®ШЄЩЉШ§Ш± Ш®Ш§ШЇЩ…\n"
-"Ш§Щ„Щ€Щ‚ШЄ Ш§?Щ‚Ш±ШЁ Ш§Щ„ЩЉЩѓ. Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш± ЩЉШ«ШЁШЄ Ш®Ш§ШЇЩ… Щ€Щ‚ШЄ\n"
-"ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§?Ш®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
+msgid "daily"
+msgstr "ЩЉЩ€Щ…ЩЉЩ‘Ш§Щ‹"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш·Щ€Ш© Щ‡ЩЉ ?Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡Ш§ Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„.\n"
-"\n"
-"ШіЩЉЩ‚Щ€Щ… DrakX ШЁШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ Щ‡Ш°Ш§ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
-"Ш±Ш§Ш¬Ш№ ЩѓЩ„ Ш®ШЇЩ…Ш© ШЁШЄЩ…Ш№Щ† Щ€ Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† ШЄЩ„Щѓ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ? ШЄШ­ШЄШ§Ш¬Щ‡Ш§\n"
-"ШЁШґЩѓЩ„ ШЇШ§Ш¦Щ… Ш№Щ†ШЇ Ш§?Щ‚Щ„Ш§Ш№.\n"
-"\n"
-"ШіЩЉШЄЩ… Ш№Ш±Ш¶ ШґШ±Ш­ Щ‚ШµЩЉШ± Ш­Щ€Щ„ Ш§Щ„Ш®ШЇЩ…Ш© Ш№Щ†ШЇ\n"
-"Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§. Ш№Щ…Щ€Щ…Ш§Щ‹, Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇ Щ…Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш®ШЇЩ…Ш© Щ…ЩЃЩЉШЇШ© ШЈЩ… ?,\n"
-"ЩЃЩ…Щ† Ш§?ЩЃШ¶Щ„ ШЄШ±Щѓ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉ.\n"
-"\n"
-"!! ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш±Ш­Щ„Ш© ЩѓЩ† Ш­Ш°Ш±Ш§ЩЏ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ\n"
-"ЩѓШ®Ш§ШЇЩ…: Ш±ШЁЩ…Ш§ Щ„Щ† ШЄШ±ЩЉШЇ ШЁШЇШЎ ШЈЩЉ Ш®ШЇЩ…Ш§ШЄ ? ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
-"ЩЃШ¶Щ„Ш§Щ‹ ШЄШ°ЩѓШ± ШЈЩ† Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Щ‚ШЇ ШЄЩѓЩ€Щ† Ш®Ш·Ш±Ш© Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ\n"
-"Щ…ШЄШ§Ш­Ш© Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…. ШЁШґЩѓЩ„ Ш№Ш§Щ… Ш§Ш®ШЄШ± ЩЃЩ‚Ш· Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
-"!!"
+msgid "and one unknown printer"
+msgstr "Щ€ Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ©"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
-"\"Ш§Щ„Ш·Ш§ШЁШ№Ш©\": Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ \"ШЄЩ‡ЩЉШ¦Ш©\" ШіЩЉЩЃШЄШ­ Щ…Ш№Ш§Щ„Ш¬ ШЄЩ‡ЩЉШ¦Ш©\n"
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Щ‚Ш±ШЈ Ш§Щ„ЩЃШ¶Щ„ Ш§Щ„Щ…Ш®ШЄШµ ЩЃЩЉ ``ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШЁШЄШЇШ¦''\n"
-"Щ„ЩѓШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш№Щ† ЩѓЩЉЩЃЩЉШ© Ш§Ш№ШЇШ§ШЇ Ш·Ш§ШЁШ№Ш© Ш¬ШЇЩЉШЇШ©. Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©\n"
-"Щ‡Щ†Ш§Щѓ Щ…Щ…Ш§Ш«Щ„Ш© Щ„ШЄЩ„Щѓ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Ш© ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ."
+msgid "Ireland"
+msgstr "ШЈЩЉШ±Щ„Щ†ШЇШ§"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "Ш§ШµШЇШ§Ш±Ш© Ш§Щ„Щ„ШЁ"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr "          ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©       "
+
+#: ../../Xconfig/test.pm:1
 #, c-format
+msgid "Is this the correct setting?"
+msgstr "Щ‡Щ„ Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШµШ­ЩЉШ­Шџ"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2349,4338 +2318,4175 @@ msgstr ""
 "``ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШЁШЄШЇШ¦'' Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„ Ш­Щ€Щ„ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, ШЈЩ€ ШЁШЁШіШ§Ш·Ш© Ш§Щ†ШЄШёШ± Ш­ШЄЩ‰ ЩЉШЄЩ…\n"
 "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ… Щ€ Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Щ…Ш°ЩѓЩ€Ш± Щ‡Щ†Ш§Щѓ ?Ш№ШЇШ§ШЇ Ш§Щ„Щ€ШµЩ„Ш©."
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-"ШЄШ«ШЁЩЉШЄ Mandrake Linux Щ…Щ€ШІШ№ Ш№Щ„Щ‰ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЈЩ‚Ш±Ш§Шµ. DrakX\n"
-"ЩЉШ№Щ„Щ… ШҐШ°Ш§ ЩѓШ§Щ†ШЄ Ш­ШІЩ…Ш© Щ…Ш§ ЩЃЩЉ Щ‚Ш±Шµ ШўШ®Ш± Щ€ ШіЩЉШ®Ш±Ш¬ Ш§Щ„Щ‚Ш±Шµ\n"
-"Ш§Щ„Ш­Ш§Щ„ЩЉ Щ€ ШіЩЉШ·Щ„ШЁ Щ…Щ†Щѓ ШЈЩ† ШЄШЇШ®Щ„ Щ‚Ш±ШµШ§Щ‹ Щ…Ш®ШЄЩ„ЩЃШ§ ЩѓЩ…Ш§ Щ‡Щ€ Щ…Ш·Щ„Щ€ШЁ."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"ЩЃЩЉ Ш§Щ„ШЈШ№Щ„Щ‰ ШіШЄШ¬ШЇ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Щ„ЩЉЩ†ЩѓШі Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ€ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ "
-"Ш§Щ„Ш®Ш§Шµ ШЁЩѓ.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄЩЏШЁЩ‚ЩЉ ШҐШ®ШЄЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬, Щ€ Щ‡ЩЉ Ш¬ЩЉШЇШ© Щ„ШЈШєЩ„ШЁ ШЈЩ†Щ€Ш§Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
-"ШҐШ°Ш§ Щ‚Щ…ШЄ ШЁШ№Щ…Щ„ ШЈЩЉ ШЄШєЩЉЩЉШ±Ш§ШЄ ЩЃЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШ№Ш±ЩЃ Ш§Щ„ШЄЩ‚ШіЩЉЩ… Ш§Щ„Ш¬Ш°Ш± (\"/\"). Щ„Ш§ ШЄШ®ШЄШ±\n"
-"ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш¶ШєЩЉШ±Ш© Ш¬ШЇШ§ Щ€ ШҐЩ„Ш§ Щ„Щ† ШЄШіШЄШ·ЩЉШ№ ШЄШ«ШЁЩЉШЄ ШЁШ±Ш§Щ…Ш¬ ЩѓШ§ЩЃЩЉШ©. ШҐШ°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШ®ШІЩЉЩ† "
-"Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ\n"
-"Ш№Щ„Щ‰ ШЄЩ‚ШіЩЉЩ… Щ…ШіШЄЩ‚Щ„ ЩЃШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш№Щ…Щ„ ШЄЩ‚ШіЩЉЩ… Щ„ЩЂ\"/home\"\n"
-"(Щ…Щ…ЩѓЩ† ЩЃЩ‚Ш· ШҐШ°Ш§ ЩѓШ§Щ† Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† ШЄЩ‚ШіЩЉЩ… Щ„Щ„ЩЉЩ†ЩѓШі).\n"
-"\n"
-"ЩѓЩ„ ШЄЩ‚ШіЩЉЩ… Щ…ЩЏШ№Ш·Щ‰ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Ш§Щ„ШҐШіЩ…\", \"Ш§Щ„ШіШ№Ш©\".\n"
-"\n"
-"\"Ш§Щ„ШҐШіЩ…\" Щ…Ш±ЩѓШЁ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Щ†Щ€Ш№ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\", \"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\",\n"
-"\"Ш±Щ‚Щ… Ш§Щ„ШЄЩ‚ШіЩЉЩ…\" (Щ…Ш«Щ„Ш§, \"hda1\").\n"
-"\n"
-"\"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\" ШЇШ§Ш¦Щ…Ш§ Щ‡Щ€ Ш­Ш±ЩЃ ШЁШ№ШЇ \"hd\" ШЈЩ€ \"sd\". ШЁШ§Щ„Щ†ШіШЁШ© Щ„Щ„ШЈЩ‚Ш±Ш§Шµ "
-"Ш§Щ„ШµЩ„ШЁШ©\n"
-"Щ…Щ† Щ†Щ€Ш№ IDE ЩЃШҐЩ†:\n"
-" * \"a\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
-"\n"
-" * \"b\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
-"\n"
-" * \"c\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
-"\n"
-" * \"d\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
-"\n"
-"ШЈЩ…Ш§ ШЁШ§Щ„Щ†ШіШЁШ© Щ„ШЈЩ‚Ш±Ш§Шµ ШіЩѓШІЩЉ SCSI ЩЃШ§Щ„Ш­Ш±ЩЃ \"a\" ЩЉШ№Щ†ЩЉ \"ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Щ€ Ш§Щ„Ш­Ш±ЩЃ \"b"
-"\"\n"
-"ЩЉШ№Щ†ЩЉ \"Ш«Ш§Щ†ЩЉ ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Ш§Щ„Ш®."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©, Ш№Щ„ЩЉЩѓ Щ‚Ш±Ш§ШЎШ© ШЁЩ†Щ€ШЇ Ш§Щ„ШЄШ±Ш®ЩЉШµ Ш¬ЩЉШЇШ§Щ‹. Ш§Щ†Щ‡Ш§\n"
-"ШЄШєШ·ЩЉ ЩѓЩ„ ШЄЩ€ШІЩЉШ№Ш© Mandrake Linux. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩ€Ш§ЩЃЩ‚ Ш№Щ„Щ‰ ЩѓЩ„ Ш§Щ„ШЁЩ†Щ€ШЇ\n"
-"Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉЩ‡Ш§, Щ‚Щ… ШЁШ§Щ„ШЄШЈШґШЁШ± Ш№Щ„Щ‰ ШµЩ†ШЇЩ€Щ‚ \"Ш§Щ‚ШЁЩ„\". Ш§Щ† Щ„Щ… ШЄЩ‚ШЁЩ„, Щ‚Щ… ШЁШҐШєЩ„Ш§Щ‚\n"
-"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±."
-
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr "Ш№Щ„ЩЉЩѓ ШЈЩЉШ¶Ш§ ШЄШ¬Щ‡ЩЉШІ %s"
-
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
-"ШЄШ№Ш°Ш± Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ€Ш­ШЇШ§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Щ€Ш§Ш© Ш§Щ„Щ†ШёШ§Щ… (Ш§Щ„Щ…Щ„ЩЃ %s Щ…ЩЃЩ‚Щ€ШЇ), ШЁШґЩѓЩ„ Ш№Ш§Щ… "
-"ЩЉШ№Щ†ЩЉ Щ‡Ш°Ш§ ШЈЩ† Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…Ш±Щ† Щ„ЩЉШі Щ…Ш­ШЇЩ‘Ш«Ш§Щ‹ Щ…Ш№ Щ€ШіЩЉШ· Ш§Щ„ШЄШ«ШЁЩЉШЄ (ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐЩ†ШґШ§ШЎ Щ‚Ш±Шµ "
-"Ш§Щ‚Щ„Ш§Ш№ Ш¬ШЇЩЉШЇ)"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
-msgstr ""
-"Щ„Щ‚ШЇ ШёЩ‡Ш± Ш®Ш·ШЈ - Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЈШ¬Щ‡ШІШ© ШµШ§Щ„Ш­Ш© ЩЉЩ…ЩѓЩ† Ш§Щ†ШґШ§ШЎ ШЈЩ†ШёЩ…Ш© Щ…Щ„ЩЃШ§ШЄ Ш¬ШЇЩЉШЇШ©. ШЄШЈЩѓШЇ Щ…Щ† "
-"Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ„Щ…Ш№Ш±ЩЃШ© ШґШЁШЁ Щ‡Ш°Щ‡ Ш§Щ„Щ…ШґЩѓЩ„Ш©"
-
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "Ш®Ш·ШЈ ЩЃЩЉ Щ‚Ш±Ш§ШЎШ© Ш§Щ„Щ…Щ„ЩЃ %s"
-
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-msgstr ""
-"Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ Ш§Щ„Щ…Ш­ЩЃЩ€ШёШ© Щ„Щ„Ш­ШІЩ…, Щ‚Щ… ШЁШЁШЇШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Ш№ Ш®ЩЉШ§Ш± ``linux "
-"defcfg=floppy''"
+msgid "Wizard Configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../install_any.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† ШєЩЉШ± Щ…Ш¬Щ‡ШІ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT"
+msgid "Autoprobe"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† Щ…Ш¬Щ‡ШІ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
+msgid "Backup system files..."
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…..."
 
 #: ../../install_any.pm:1
 #, c-format
 msgid "Can't use broadcast with no NIS domain"
 msgstr "Can't use broadcast with no NIS domain"
 
-#: ../../install_any.pm:1
-#, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
-"ШіЩЉШЄЩ… Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ… Щ„ЩѓЩЉ ШЄШЄЩ… ШЄШ±Щ‚ЩЉШ© Ш§Щ„Щ†ШёШ§Щ…: %s\n"
-"\n"
-"\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ… ЩЃШ№Щ„Ш§Щ‹Шџ\n"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No"
-msgstr "Щ„Ш§"
+msgid "Removing printer \"%s\"..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ..."
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Yes"
-msgstr "Щ†Ш№Щ…"
+msgid "drakfloppy"
+msgstr "ШЇШ±ЩЉЩѓ Щ„Щ„Ш§Щ‚Ш±Ш§Шµ Ш§Щ„Щ…Ш±Щ†Ш©"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"Please indicate where the auto_install.cfg file is located.\n"
 "\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"Do you really want to install these servers?\n"
 msgstr ""
-"Щ„Щ‚ШЇ Ш§Ш®ШЄШ±ШЄ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©: %s\n"
-"\n"
-"\n"
-"Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Щ…ЩЃШ№Щ‘Щ„Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹, Щ€ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ„Щ‡Щ… Щ…ШґШ§ЩѓЩ„ ШЈЩ…Щ†ЩЉШ©\n"
-"Щ…Ш№Ш±Щ€ЩЃШ©, Щ€ Щ„ЩѓЩ† Щ‚ШЇ ШЄЩѓШЄШґЩЃ ШЁШ№Ш¶ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Ш§Щ„Ш¬ШЇЩЉШЇШ©. ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш©, ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†\n"
-"ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ±Щ‚ЩЉШ© ЩЃЩЉ ШЈЩ‚Ш±ШЁ Щ€Щ‚ШЄ Щ…Щ…ЩѓЩ†.\n"
-"\n"
+"ЩЃШ¶Щ„Ш§Щ‹ Ш­ШЇШЇ Щ…ЩѓШ§Щ† Щ…Щ„ЩЃ auto_install.cfg.\n"
 "\n"
-"Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШўЩ†Шџ\n"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ…"
-
-#: ../../install_gtk.pm:1
-#, c-format
-msgid "System installation"
-msgstr "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ…"
+"Ш§ШЄШ±Щѓ Ш§Щ„Ш­Щ‚Щ„ ЩЃШ§Ш±ШєШ§Щ‹ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇ Щ€Ш¶Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш§Щ„ЩЉ.\n"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШєЩ„Ш§Щ‚ Ш§Щ„ШґШЁЩѓШ©"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„ЩЉЩ‡Ш§ Щ…Щ† ШЄШ№Щ„ЩЉЩ…Ш§ШЄ cpuid"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Peru"
+msgstr "ШЁЩЉШ±Щ€"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШЄШ¬ШІШ¦Ш©: %s"
+msgid " on device: %s"
+msgstr " Ш№Щ„Щ‰ Ш§Щ„Ш¬Щ‡Ш§ШІ: %s"
 
 #: ../../install_interactive.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Ш№Ш«Ш± Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШЄШ¬ШІШ¦Ш© ЩЃЩЉ DrakX Ш№Щ„Щ‰ Ш§Щ„Ш­Щ„Щ€Щ„ Ш§Щ„ШЄШ§Щ„ЩЉШ©:"
+msgid "Remove Windows(TM)"
+msgstr "Ш§Ш­Ш°ЩЃ Windows(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§ЩЉШ¬Ш§ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© Щ„Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "ШЄШЁШЇШЈ Ш®Ш§ШЇЩ… Ш®Ш·Щ€Ш· X (Щ‡Ш°Ш§ Ш§Щ„ШІШ§Щ…ЩЉ Щ„ЩѓЩЉ ЩЉШ№Щ…Щ„ XFree)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† ШЄШ¬ШІШ¦Ш© %s.\n"
-"Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ Щ„Ш§ ШЄЩ†ШіЩ‰ Ш§Щ„Ш­ЩЃШё ШЁШ§ШіШЄШ®ШЇШ§Щ… `w'"
+"ШЄЩ… Ш§ШіШЄШ®Ш±Ш§Ш¬ ШЈШєЩ„ШЁ Щ‡Ш°Щ‡ Ш§Щ„Щ‚ЩЉЩ…\n"
+"Щ…Щ† Ш§Щ„Щ†ШёШ§Щ….\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ№ШЇЩЉЩ„ Ш§Ш°Ш§ Ш§Ш­ШЄШ¬ШЄ Щ„Ш°Щ„Щѓ."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Use fdisk"
-msgstr "Ш§ШіШЄШ®ШЇЩ… fdisk"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ ШЈЩ€ ШЇЩ„ЩЉЩ„ Ш§Щ„Ш®Ш·Щ€Ш· Щ€ Ш§Ш¶ШєШ· 'Ш§Ш¶Ш§ЩЃШ©'"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "ШЄШ¬ШІШ¦Ш© Щ…Ш®ШµШµШ©"
+msgid "Madagascar"
+msgstr "Щ…ШЇШєШґЩ‚Ш±"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ€ ШЁЩЉШ§Щ†Ш§ШЄЩ‡Ш§ ШіШЄШ¶ЩЉШ№ Щ…Щ† Ш№Щ„Щ‰ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
+msgid "Urpmi"
+msgstr "Urpmi"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Щ‚Ш±Шµ ШµЩ„ШЁ, ЩЃЩЉ ШЈЩЉЩ‡Щ… ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ„ЩЉЩ†ЩѓШіШџ"
+msgid "Cron not available yet as non-root"
+msgstr "Cron ШєЩЉШ± Щ…ШЄЩ€ЩЃШ± Ш­ШЄЩ‰ Ш§Щ„ШўЩ† Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШєЩЉШ± Ш§Щ„Ш¬Ш°Ш±"
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Ш§Щ…ШіШ­ ЩѓЩ„ Ш§Щ„Щ‚Ш±Шµ"
+msgid "System"
+msgstr "Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Remove Windows(TM)"
-msgstr "Ш§Ш­Ш°ЩЃ Windows(TM)"
+msgid "Do you want to use this feature?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©Шџ"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© FAT Щ‚Ш§ШЁЩ„ Щ„ШЄШєЩЉЩЉШ± Ш­Ш¬Щ…Щ‡Ш§ (ШЈЩ€ Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ©)"
+msgid "Arabic"
+msgstr "Ш§Щ„Ш№Ш±ШЁЩЉШ©"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"\n"
+"- Options:\n"
 msgstr ""
-"Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ ШЁШ№ШЇ Ш§Ш№Ш§ШЇШ© ШЄШ­Ш¬ЩЉЩ… Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ, \n"
-"ШіЩЉШЄЩ… Ш§Щ„ШЇЩ‚ЩЉЩ‚ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ†ШЇ Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ‚Ш§ШЇЩ… Щ„ЩЂ Windows(TM)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "ЩЃШґЩ„ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… FAT: %s"
+"\n"
+"- Ш®ЩЉШ§Ш±Ш§ШЄ:\n"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Windows"
+msgid "Password required"
+msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Resizing"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
+msgid "%d minutes"
+msgstr "%d ШЇЩ‚Ш§Ш¦Щ‚"
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
+msgid "Graphics card: %s"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Ш№Щ„Щ‰ ШЈЩЉ Щ…ШіШ§Ш­Ш© ШЄШ±ЩЉШЇ Ш­ЩЃШё Windows"
+msgid "WebDAV transfer failed!"
+msgstr "ЩЃШґЩ„ШЄ Ш№Щ…Щ„ЩЉШ© Щ†Щ‚Щ„ WebDAV!"
 
-#: ../../install_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ШЄШ­Ш°ЩЉШ±!\n"
-"\n"
-"DrakX ШіЩЉЩ‚Щ€Щ… Ш§Щ„ШўЩ† ШЁШЄШєЩЉЩЉШ± Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Windows. ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹:\n"
-"Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Ш®Ш·Ш±Ш©. ЩЃШҐШ°Ш§ Щ„Щ… ШЄЩѓЩ† ЩЃШ№Щ„ШЄ Ш°Щ„Щѓ,\n"
-"ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ€Щ„Ш§Щ‹ Ш§Щ„Ш®Ш±Щ€Ш¬ Щ…Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ, Ш«Щ… ШґШєЩ‘Щ„ scandisk\n"
-"ЩЃЩЉ Windows (Щ€ Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ§Щ‹ defrag), Ш«Щ… ШЈШ№ШЇ\n"
-"Ш§Щ„ШЄШ«ШЁЩЉШЄ. ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ЩѓШ°Щ„Щѓ Ш№Щ…Щ„ Щ†ШіШ®Ш© Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ© Щ…Щ† ШЁЩЉШ§Щ†Ш§ШЄЩѓ.\n"
-"Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШЄШЈЩѓШЇШ§Щ‹, Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚."
+msgid "XFree configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ XFree"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+msgid "Choose action"
+msgstr "Ш§Ш®ШЄШ± Ш­ШЇШ«"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш­ШіШ§ШЁ Щ…ШіШ§Ш­Ш© ШЄШ¬ШІШ¦Ш© Windows"
+msgid "French Polynesia"
+msgstr "ШЁЩ€Щ„ЩЉЩ†ЩЉШіЩЉШ§ Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
-"Щ„Щ… ШЄШЄЩ…ЩѓЩ† ШЈШЇШ§Ш© ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… FAT Щ…Щ† Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ ШЄШ¬ШІШ¦ШЄЩѓ, \n"
-"ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЄШ±ЩЉШЇ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ…Щ‡Ш§Шџ"
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„ЩЃШ§Ш±ШєШ© Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Windows"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "ШЇШ№Щ… Ш·Ш§ШЁШ№Ш§ШЄ OKI 4w Щ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€Ш§ЩЃЩ‚Ш©."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© FAT Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ ЩѓЩЂ loopback (ШЈЩ€ Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ©)"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "ШЄШґШєЩ‘Щ„ Щ†ШёШ§Щ… Ш§Щ„ШµЩ€ШЄ ALSA (Advanced Linux Sound Arachitecture)"
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„ ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Installing driver for %s card %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Щ…ШґШєЩ„ %s Щ„Щ„ШЁШ·Ш§Щ‚Ш© %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Ш­Ш¬Щ… Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ© ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
+"Щ„Щ‚ШЇ Щ‚Щ…ШЄ ШЁЩ†Щ‚Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШіШ§ШЁЩ‚Ш© (\"%s\"), Щ‡Щ„ ЩЉШ¬ШЁ ШЈЩЉШ¶Ш§Щ‹ ШЈЩ† ШЄЩѓЩ€Щ† "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© ШЄШ­ШЄ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Ш¬ШЇЩЉШЇ %sШџ"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЈШ­Ш¬Ш§Щ…"
+msgid "Enable Server"
+msgstr "Щ…ЩѓЩ‘Щ† Ш§Щ„Ш®Ш§ШЇЩ…"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ…Щ† ШЈШ¬Щ„ Linux4Win"
+msgid "Ukrainian"
+msgstr "Ш§Щ„ШЈЩ€ЩѓШ±Ш§Щ†ЩЉШ©"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Ш§ШіШЄШ®ШЇЩ… ШЄШ¬ШІШ¦Ш© Windows ЩѓЩЂ loopback"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ„Ш§ ЩЉШ№Щ…Щ„ Щ€ Щ„Щ… ЩЉЩ…ЩѓЩ† ШЁШЇШ¤Щ‡. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Щ„ШЇЩЉЩѓ Щ€ Ш§Щ„Ш№ШЄШ§ШЇ "
+"Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Ш«Щ… Ш­Ш§Щ€Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ© Щ…Ш±Ш© ШЈШ®Ш±Щ‰."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Ш°ЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡ ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©"
+msgid "Local network(s)"
+msgstr "Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© Щ„Ш№Щ…Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Ш¬ШЇЩЉШЇШ©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Ш§Ш­Ш°ЩЃ Windows(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Use free space"
-msgstr "Ш§ШіШЄШ№Щ…Щ„ Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„ЩЃШ§Ш±ШєШ©"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
+"ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ %s.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Щ…ШіШ­ Ш§Щ„Щ…ШіШЄЩ†ШЇШ§ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… \"XSane\" Щ…Щ† ЩЃШ±Ш№ Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ©/ШЁШ±Ш§Щ…Ш¬ Ш±ШіЩ€Щ…ЩЉШ© "
+"ЩЃЩЉ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ."
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© FAT ШЄЩ… ШЄШ­Щ…ЩЉЩ„Щ‡Ш§ Ш№Щ„Щ‰ /boot/efi"
+msgid "Firewire controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ Firewire"
 
-#: ../../install_interactive.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"You don't have a swap partition.\n"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
 "\n"
-"Continue anyway?"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
-"Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© ШЄШЁШЇЩЉЩ„.\n"
+"ШЁШ№ШЇЩ…Ш§ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш№Ш§Щ…?ШЄ Ш§Щ„Ш№Ш§Щ…Ш© Щ„Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, ЩЃШіЩЉШЄЩ…\n"
+"Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§?Щ‚Щ„Ш§Ш№ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„.\n"
 "\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ ШЈЩ†ШёЩ…Ш© ШЄШґШєЩЉЩ„ ШЈШ®Ш±Щ‰ Щ…Ш«ШЁШЄШ© Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ ЩЃШіЩЉШЄЩ… Ш§Ш¶Ш§ЩЃШЄЩ‡Ш§\n"
+"ШўЩ„ЩЉШ§Щ‹ Ш§Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© Ш§?Щ‚Щ„Ш§Ш№. ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ­ЩѓЩ… ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ\n"
+"Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ШЁЩ†Щ‚Ш± \"Ш§Ш¶ЩЃ\" ?Щ†ШґШ§ШЎ Щ…ШЇШ®Щ„ Ш¬ШЇЩЉШЇ, Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШЇШ®Щ„ Щ€\n"
+"Щ†Щ‚Ш± \"ШЄШ№ШЇЩЉЩ„\" ШЈЩ€ \"Ш­Ш°ЩЃ\" Щ„ШЄШ№ШЇЩЉЩ„ ШЈЩ€ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ®Щ„. \"Щ…Щ€Ш§ЩЃЩ‚\" ЩЉШЄШЈЩѓШЇ\n"
+"Щ…Щ† ШЄШєЩЉЩЉШ±Ш§ШЄЩѓ.\n"
+"\n"
+"Ш±ШЁЩ…Ш§ ? ШЄШ±ЩЉШЇ ?ЩЉ ШґШ®Шµ ЩЉШЄЩ…ЩѓЩ† Щ…Щ† Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ЩЉШіШЄШ·ЩЉШ№\n"
+"Ш§Щ„Щ€ШµЩ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰. ЩЉЩ…ЩѓЩ†Щѓ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ§Ш®Щ„ Ш§Щ„Щ…Щ‚Ш§ШЁЩ„Ш©\n"
+"?Щ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Щ„Ш­Ш°ЩЃЩ‡Ш§ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, Щ„ЩѓЩ† ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш© ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‚Ш±Шµ\n"
+"Щ…Ш±Щ† Щ„Щ„ШҐЩ‚?Ш№ ЩѓЩЉ ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш©\n"
+"Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰!"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© Ш¬Ш°Ш±ЩЉШ©.\n"
-"Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶ Ш§Щ†ШґШ¦ ШЄШ¬ШІШ¦Ш© (ШЈЩ€ Ш§Щ†Щ‚Ш± Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Щ…Щ€Ш¬Щ€ШЇШ©).\n"
-"Ш«Щ… Ш§Ш®ШЄШ± ``Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„'' Щ€ Ш§Ш¬Ш№Щ„Щ‡Ш§ `/'"
+msgid "System mode"
+msgstr "Щ€Ш¶Ш№ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
-"ШЁШ№Ш¶ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШґШєЩ„Ш§ШЄ ``ШЄШ¬Ш§Ш±ЩЉШ©'' ЩѓЩЉ ШЄШ№Щ…Щ„.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§ЩЉШ¬Ш§ШЇ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш№Щ†Щ‡Ш§ ЩЃЩЉ: %s"
+"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш© NetWare, ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш®Ш§ШЇЩ… Ш·ШЁШ§Ш№Ш© NetWare (Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ "
+"Щ‚ШЇ ЩЉШ®ШЄЩ„ЩЃ Ш№Щ† Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP!) ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„ШµЩЃ Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ Ш±ШєШЁ ЩЃЩЉ "
+"Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡Ш§ ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ… Щ€ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Щ…Щ†Ш§ШіШЁШЄЩЉЩ†."
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ‚ШЇ Ш§Щ†ШЄЩ‡Щ‰.\n"
-"Ш§Ш­Ш°ЩЃ Щ€ШіЩЉШ· Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ€ Ш§Ш¶ШєШ· ШІШ± Ш§ШЇШ®Щ„ Щ„ШҐШ№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„.\n"
-"\n"
-"\n"
-"Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„ Ш§Щ„ШҐШµЩ„Ш§Ш­Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Mandrake Linux,\n"
-"ШІШ± ШµЩЃШ­Ш© ШЄШµШ­ЩЉШ­ Ш§Щ„ШЈШ®Ш·Ш§ШЎ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ…Щ†:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ… Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ ЩЃШµЩ„\n"
-"Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ ШЇЩ„ЩЉЩ„ Щ…ШіШЄШ®ШЇЩ… Mandrake Ш§Щ„Ш±ШіЩ…ЩЉ."
+msgid "Netmask:"
+msgstr "Netmask:"
 
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Append"
+msgstr "Ш§Щ„Ш­Ш§Щ‚"
 
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr "ШЈШ№ШЇ ШЄШ­Щ…ЩЉЩ„ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ (Щ„Ш№Ш±Ш¶ ЩѓЩ„ Ш·Ш§ШЁШ№Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©)"
 
-#: ../../install_messages.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
 "\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
 "\n"
-"2. Limited Warranty\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
 "\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
 "\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
+"Ш№Щ†ШЇ ШЄШґШєЩЉЩ„ Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±, ЩЃШ№Щ†ШЇ ЩѓЩ„ ШЁШЇШ§ЩЉШ© ШЄШґШєЩЉЩ„ Щ„ЩЂCUPS ШіЩЉШЄЩ… Ш§Щ„ШЄШЈЩѓШЇ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Щ…Ш§\n"
 "\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
+"- Ш§Ш°Ш§ ЩѓШ§Щ† LPD/LPRng Щ…Ш«ШЁШЄШ§Щ‹, Щ„Щ† ШЄШЄЩ… Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚ /etc/printcap Ш№Щ† Ш·Ш±ЩЉЩ‚ CUPS\n"
 "\n"
+"- Ш§Ш°Ш§ ЩѓШ§Щ† /etc/cups/cupsd.conf Щ…ЩЃЩ‚Щ€ШЇ, ШіЩЉШЄЩ… Ш§Щ†ШґШ§Ш¤Щ‡ ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„\n"
 "\n"
-"3. The GPL License and Related Licenses\n"
+"- Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ†ШґЩ€Ш±Ш©, ШЈЩЉ ШЈЩ†Щ‡Ш§ Щ„Ш§ ШЄШ­ШЄЩ€ЩЉ \"localhost\" ЩѓШҐШіЩ… "
+"Щ„Щ„Ш®Ш§ШЇЩ….\n"
 "\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШЁШ№Ш¶ Щ‡Ш°Щ‡ Ш§Щ„ШҐШ¬Ш±Ш§ШЎШ§ШЄ Щ‚ШЇ ШЄШіШЁШЁШЄ ШЁЩ…ШґШ§ЩѓЩ„ Щ„Щѓ, Ш№Ш·Щ‘Щ„ Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±, Щ„ЩѓЩ† ЩЃЩЉ Щ‡Ш°Щ‡ "
+"Ш§Щ„Ш­Ш§Щ„ Ш№Щ„ЩЉЩѓ Ш§Щ„ШҐЩ†ШЄШЁШ§Щ‡ Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш§Ш·."
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
-"4. Intellectual Property Rights\n"
+"It also provides a much higher API than OSS.\n"
 "\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
-"5. Governing Laws \n"
+"It also provides a much higher API than OSS.\n"
 "\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "Entering step `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Help"
-msgstr "Щ…ШіШ§Ш№ШЇШ©"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "not configured"
-msgstr "ШєЩЉШ± Щ…Ш№ШЇЩ‘"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "ШҐШ№ШЇШ§ШЇ"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ЩЃЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…:"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error ordering packages:"
-msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ЩЃЩЉ ШЄШ±ШЄЩЉШЁ Ш§Щ„Ш­ШІЩ…:"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You may prefer to replay the installation.\n"
 msgstr ""
-"ШєЩЉШ± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬!\n"
+"Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Щ‚ШЇ ЩЉШЄЩ… ШЁШґЩѓЩ„ ШЄЩ„Щ‚Ш§Ш¦ЩЉ Ш§Ш°Ш§ ШЈШ±ШЇШЄ Ш°Щ„Щѓ,\n"
+"ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш© ШіЩЉШіШЄЩ€Щ„ЩЉ Ш№Щ„Щ‰ ЩѓЩ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„ШЇЩЉЩѓ!!\n"
+"(Щ‡Ш°Ш§ ШЁШ§Щ„Щ†ШіШЁШ© Щ„Щ„ШЄШ«ШЁЩЉШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ ШўШ®Ш±).\n"
 "\n"
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш§Щ„Щ…ШіЩ…Щ‰ \"%s\" ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© Щ€ Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚ Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ.\n"
-"Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Ш§Щ„Щ‚Ш±Шµ Щ„ШЇЩЉЩѓ, Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ Щ„ШЄШ¬Щ†ШЁ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬."
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "Ш§Ш±ЩЃШ¶"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Ш§Щ‚ШЁЩ„"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Installing package %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "%d packages"
-msgstr "%d Ш­ШІЩ…"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "No details"
-msgstr "Щ„Ш§ ШЄЩЃШ§ШµЩЉЩ„"
+"Ш±ШЁЩ…Ш§ ШЄЩЃШ¶Щ„ Ш§Ш№Ш§ШЇШ© Ш№Щ…Щ„ЩЉШ© Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Details"
-msgstr "ШЄЩЃШ§ШµЩЉЩ„"
+msgid "Network printer \"%s\", port %s"
+msgstr "Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Ш§Щ†ШЄШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Ш¶ЩЉШ± Щ„Щ„ШЄШ«ШЁЩЉШЄ..."
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… ШЁЩ‡ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Time remaining "
-msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Щ…ШЄШЁЩ‚ЩЉ"
+msgid "OK to restore the other files."
+msgstr "Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Щ„Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ„ЩЃШ§ШЄ Ш§Ш®Ш±Щ‰"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Estimating"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш­ШіШ§ШЁ Ш§Щ„ШЄЩ‚Ш±ЩЉШЁЩЉ"
+msgid "Please choose your keyboard layout."
+msgstr "Ш±Ш¬Ш§ШЎ, Ш§Ш®ШЄШ± Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­."
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Installing"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Printer Device URI"
+msgstr "URI Ш¬Щ‡Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§"
+msgid "Not erasable media!"
+msgstr "Щ€ШіЩЉШ· ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„Щ„Щ…ШіШ­!"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Minimal install"
-msgstr "ШЄШ«ШЁЩЉШЄ Щ…ШµШєЩ‘Ш±"
+msgid "Terminal-based"
+msgstr "Terminal-based"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­ШЇЩЉШ« Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
+msgid "Installing a printing system in the %s security level"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© ЩЃЩЉ Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ† %s"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Ш­Щ…Щ‘Щ„/Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
+msgid "The user name is too long"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш·Щ€ЩЉЩ„ Ш¬ШЇШ§Щ‹"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Ш§Щ„ШіШ§ШЁЩ‚ "
+msgid "Other OS (windows...)"
+msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (Windows...)"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Install"
-msgstr "Ш«ШЁЩ‘ШЄ"
+msgid "WebDAV remote site already in sync!"
+msgstr "Щ…Щ€Щ‚Ш№ WebDAV Ш§Щ„ШЁШ№ЩЉШЇ Щ…ШЄШІШ§Щ…Щ† Щ…ШіШЁЩ‚Ш§Щ‹!"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "ШЈШёЩ‡Ш± Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШЈЩ„ЩЉШ§Щ‹"
+msgid "Reading printer database..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©. ЩЉШ¬ШЁ ШЄШ±Щ‚ЩЉШЄЩ‡Ш§"
+msgid "Generate auto install floppy"
+msgstr "Ш§Щ†ШґШ¦ Щ‚Ш±Шµ ШЄШ«ШЁЩЉШЄ ШўЩ„ЩЉ"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
 msgstr ""
-"ЩЉШ¬ШЁ ШЄШ±Щ‚ЩЉШ© Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©.\n"
-"Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ Щ„Ш§ ШЄШ±ЩЉШЇ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§Шџ"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…. Ш§Щ†Щ‡Ш§ Щ…Ш«ШЁШЄШ© Щ…ШіШЁЩ‚Ш§Щ‹"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© Ш§Щ„ШІШ§Щ…ЩЉШ©, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш№ШЇЩ… Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§"
-
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±/Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©"
+"\t\t Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…: %s\n"
+"\t\t Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш±: %s\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "ШіЩЉШЄЩ… Ш­Ш°ЩЃ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©"
+msgid "Somalia"
+msgstr "Ш§Щ„ШµЩ€Щ…Ш§Щ„"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "ШіЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©"
+msgid "No open source driver"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…ЩЃШЄЩ€Ш­ Ш§Щ„Щ…ШµШЇШ±"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© Щ„ШЈЩ†Щ‡ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ© Щ„ШЄШ«ШЁЩЉШЄЩ‡Ш§"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
+"Щ‡Ш°Ш§ Щ…Щ…Ш§Ш«Щ„ Щ„Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШіШ§ШЁЩ‚, Щ€ Щ„ЩѓЩ† Ш§Щ„Щ†ШёШ§Щ… Щ…ШєЩ„Щ‚ ЩѓЩ„ЩЉШ§Щ‹ Щ€ Ш§Щ„Щ…ШІШ§ЩЉШ§ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Щ„Щ‰ Ш­ШЇЩ‡Ш§ "
+"Ш§Щ„ШЈЩ‚ШµЩ‰."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "Ш§Щ„ШЈЩ‡Щ…ЩЉШ©: %s\n"
+msgid "Nicaragua"
+msgstr "Щ†ЩЉЩѓШ§Ш±Ш§ШєЩ€Ш§"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Ш§Щ„Ш­Ш¬Щ…: %d ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ\n"
+msgid "New Caledonia"
+msgstr "Щ†ЩЉЩ€ЩѓШ§Щ„ЩЉШЇЩ€Щ†ЩЉШ§"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Ш§Щ„ШҐШµШЇШ§Ш±: %s\n"
+msgid "European protocol (EDSS1)"
+msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШЈЩ€Ш±Щ€ШЁЩЉ (EDSS1)"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Ш§Щ„ШҐШіЩ…: %s\n"
+msgid "Video mode"
+msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Bad package"
-msgstr "Ш­ШІЩ…Ш© ШіЩЉШ¦Ш©"
+msgid "Please enter your email address below "
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† ШЁШ±ЩЉШЇЩѓ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ ШЈШЇЩ†Ш§Щ‡ "
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other"
-msgstr "ШЈШ®Ш±Щ‰"
+msgid "Oman"
+msgstr "Ш№Щ…Ш§Щ†"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„ШҐШ¬Щ…Ш§Щ„ЩЉ: %d / %d Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Network Monitoring"
+msgstr "Щ…Ш±Ш§Щ‚ШЁШ© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Ш§Щ„ШЄШ§Щ„ЩЉ ->"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± Щ…ЩЃШ±ШЇ Щ„Щ„Ш­ШІЩ…"
+msgid "New size in MB: "
+msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Ш¬ШЇЩЉШЇ ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ: "
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± Щ…Ш¬Щ…Щ€Ш№Ш§ШЄ Ш§Щ„Ш­ШІЩ…"
+msgid "Partition table type: %s\n"
+msgstr "Щ†Щ€Ш№ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…: %s\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Ш§Щ„Щ†ШёШ§Щ… Щ„ШЇЩЉЩѓ Щ‚Щ„ЩЉЩ„ Ш§Щ„Щ…Щ€Ш§Ш±ШЇ. Щ‚ШЇ ШЄЩ‚Ш§ШЁЩ„ ШЁШ№Ш¶ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Щ‚ЩЉ ШЄШ«ШЁЩЉШЄ\n"
-"Mandrake Linux. Ш§Ш°Ш§ Ш­ШЇШ« Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ Щ€Ш¶Ш№ Щ†ШµЩЉ, Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶,\n"
-"Ш§Ш¶ШєШ· `F1' Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬, Щ€ Ш§ЩѓШЄШЁ `text'."
+msgid "Authentication Windows Domain"
+msgstr "ШЄШ­Щ‚Щ‚ Щ†Ш·Ш§Щ‚ Windows"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Ш§Ш­ЩЃШё Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
+msgid "US keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ©"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Automated"
-msgstr "ШўЩ„ЩЉ"
+msgid "Buttons emulation"
+msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШЈШІШ±Ш§Ш±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Replay"
-msgstr "Ш§Ш№Ш§ШЇШ©"
+msgid ", network printer \"%s\", port %s"
+msgstr ", Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
 "\n"
-"You may prefer to replay the installation.\n"
+"Drakbackup activities via tape:\n"
+"\n"
 msgstr ""
-"Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Щ‚ШЇ ЩЉШЄЩ… ШЁШґЩѓЩ„ ШЄЩ„Щ‚Ш§Ш¦ЩЉ Ш§Ш°Ш§ ШЈШ±ШЇШЄ Ш°Щ„Щѓ,\n"
-"ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш© ШіЩЉШіШЄЩ€Щ„ЩЉ Ш№Щ„Щ‰ ЩѓЩ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„ШЇЩЉЩѓ!!\n"
-"(Щ‡Ш°Ш§ ШЁШ§Щ„Щ†ШіШЁШ© Щ„Щ„ШЄШ«ШЁЩЉШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ ШўШ®Ш±).\n"
 "\n"
-"Ш±ШЁЩ…Ш§ ШЄЩЃШ¶Щ„ Ш§Ш№Ш§ШЇШ© Ш№Щ…Щ„ЩЉШ© Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "Ш§Щ†ШґШ¦ Щ‚Ш±Шµ ШЄШ«ШЁЩЉШЄ ШўЩ„ЩЉ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Reboot"
-msgstr "Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„"
+"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚ ШґШ±ЩЉШ· Ш§Щ„ШЄШ®ШІЩЉЩ†:\n"
+"\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Some steps are not completed.\n"
 "\n"
-"Do you really want to quit now?"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
-"ШЁШ№Ш¶ Ш§Щ„Ш®Ш·Щ€Ш§ШЄ Щ„Щ… ЩЉШЄЩ… ШЄЩѓЩ…Щ„ШЄЩ‡Ш§.\n"
 "\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш®Ш±Щ€Ш¬ Ш§Щ„ШўЩ† ЩЃШ№Щ„Ш§Щ‹Шџ"
+" Щ…ШґЩѓЩ„Ш© ЩЃЩЉ Щ€ШµЩ„Ш© FTP: Щ„Щ… ЩЉЩѓЩ† ШЁШ§Щ„ШҐЩ…ЩѓШ§Щ† Ш§Ш±ШіШ§Щ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ "
+"ШЁШ§ШіШЄШ®ШЇШ§Щ… FTP.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ..."
+msgid "Sending Speed:"
+msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШ±ШіШ§Щ„:"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃШ§Ш±Шє ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
+msgid "Halt bug"
+msgstr "Halt bug"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "Mail alert configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© ШЄЩ†ШЁЩЉЩ‡ Ш§Щ„ШЁШ±ЩЉШЇ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№. ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ:"
+msgid "Tokelau"
+msgstr "ШЄЩ€ЩѓЩ„Ш§Щ€"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉЩ† Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Bosnian"
+msgstr "Ш§Щ„ШЁЩ€ШіЩ†ЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ ШЄШ«ШЁЩЉШЄ aboot, \n"
-"Ш­Ш§Щ€Щ„ Ш§Щ„ШҐШ¬ШЁШ§Ш± Ш№Щ„Щ‰ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш­ШЄЩ‰ Щ€ Щ„Щ€ ШЈШЇЩЉ Ш°Щ„Щѓ Щ„ШЄШЇЩ…ЩЉШ± Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЈЩ€Щ„Щ‰Шџ"
+msgid "Release: "
+msgstr "Ш§Щ„ШҐШµШЇШ§Ш±:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… abootШџ"
+msgid "Connection speed"
+msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШЄШµШ§Щ„"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
 msgstr ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing bootloader..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Ш¶ЩЉШ± Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№..."
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ Щ†ШіШ® Ш§Щ„ШЈЩ‚Ш±Ш§Шµ\n"
+" Щ…Ш«Ш§Щ„: 0,1,0"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Domain Admin Password"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ„Щ…ШЇЩЉШ± Ш§Щ„Щ†Ш·Ш§Щ‚"
+msgid "Namibia"
+msgstr "Щ†Ш§Щ…ЩЉШЁЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Domain Admin User Name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ…ШЇЩЉШ± Ш§Щ„Щ†Ш·Ш§Щ‚"
+msgid "Database Server"
+msgstr "Ш®Ш§ШЇЩ… Щ‚Щ€Ш§Ш№ШЇ ШЁЩЉШ§Щ†Ш§ШЄ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Windows Domain"
-msgstr "Щ†Ш·Ш§Щ‚ Windows"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr "Ш§Щ…ЩѓШ§Щ†ЩЉШ§ШЄ Щ…Щ…ЩЉШІШ© Щ„Щ‡Ш°Ш§ Ш§Щ„Щ…ШґШєЩ„ (Ш§Щ…ЩѓШ§Щ†ЩЉШ© Ш§Щ„Щ†ШіШ® ШЈЩ€ ШЇШ№Щ… DVD)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Authentication Windows Domain"
-msgstr "ШЄШ­Щ‚Щ‚ Щ†Ш·Ш§Щ‚ Windows"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШ© ШЄШ¬ШІШ¦Ш© Ш§Щ„Щ‰ RAID _Ш§Щ„Щ…Ш¬Щ‡ШІ_ md%d"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "Ш®Ш§ШЇЩ… NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Domain"
-msgstr "Щ†Ш·Ш§Щ‚ NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Authentication NIS"
-msgstr "ШЄШ­Щ‚Щ‚ NIS"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS"
-msgstr "NIS"
+"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„ШЄЩ…ШЄШ№ ШЁШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ„ЩѓЩ† ЩЃЩ‚Ш· Щ…Ш№ XFree %s, \n"
+"Щ„Ш§Ш­Шё ШЈЩ† Щ‡Ш°Ш§ Ш§Щ„ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ€ Щ‚ШЇ ЩЉШЄШіШЁШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ.\n"
+"ШЁШ·Ш§Щ‚ШЄЩѓ Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ XFree %s Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЇШ№Щ€Щ…Ш© ШЁШґЩѓЩ„ ШЈЩЃШ¶Щ„ ЩЃЩЉ Щ€Ш¶Ш№ЩЉШ© "
+"Ш§Щ„Ш±ШіЩ€Щ… Ш«Щ†Ш§Ш¦ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "LDAP Server"
-msgstr "Ш®Ш§ШЇЩ… LDAP"
+msgid "Please wait, setting security options..."
+msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЈЩ…Щ†..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Base dn"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|CPH05X (bt878) [Щ…ШµЩ†Ш№Щ€Щ† ЩѓШ«ЩЉШ±Щ€Щ†]"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Authentication LDAP"
-msgstr "ШЄШ­Щ‚Щ‚ LDAP"
+msgid "Launch the graphical environment when your system starts"
+msgstr "ШґШєЩ‘Щ„ X-Window Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "hourly"
+msgstr "ЩѓЩ„Щ‘ ШіШ§Ш№Ш© "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Local files"
-msgstr "Щ…Щ„ЩЃШ§ШЄ Щ…Ш­Щ„ЩЉШ©"
+msgid "          Successfuly Restored on %s       "
+msgstr "          ШЄЩ…ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© ШЁЩ†Ш¬Ш§Ш­ Ш№Щ„Щ‰ %s       "
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚"
+msgid "Making printer port available for CUPS..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш¬Ш№Щ„ Щ…Щ†ЩЃШ° Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€ЩЃШ±Ш§Щ‹ Щ„ЩЂCUPS..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€ Щ‡Ш°Щ‡ Щ‚ШµЩЉШ±Ш© Ш¬ШЇШ§Щ‹ (ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† %d Ш±Щ…Щ€ШІ Ш№Щ„Щ‰ Ш§Щ„ШЈЩ‚Щ„)"
+msgid "Antigua and Barbuda"
+msgstr "ШЈЩ†ШЄЩЉШєЩ€Ш§ Щ€ ШЁШ§Ш±ШЁЩ€ШЇШ§"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "No password"
-msgstr "Щ„Ш§ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
+"!!! ШЄШёЩ‡Ш± Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Щ…Ш®ШЄЩ„ЩЃШ©\n"
+"Ш№Щ† ШЄЩ„Щѓ Ш§Щ„ШЄЩЉ Щ„Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш±ЩЃЩЉШ§ШЄ.\n"
+"Ш§Ш­Ш°ЩЃ/ШЈШ№ШЇ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш±ЩЃЩЉШ§ШЄ Щ„ШЄЩ…ЩѓЩЉЩ† ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Set root password"
-msgstr "Ш№ЩЉЩ‘Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш¬Ш°Ш±"
+msgid "Spanish"
+msgstr "Ш§Щ„ШҐШіШЁШ§Щ†ЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Щ„Щ… ШЄЩ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… X. Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ Ш°Щ„ЩѓШџ"
+msgid "Start"
+msgstr "Ш§ШЁШЇШЈ"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ: %d Щ…Щ†ШґЩ‘Ш·Ш© Щ„ЩЂ %d Щ…ШіШ¬Щ„Ш©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Services"
-msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
+msgid "Configuring applications..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ..."
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "System"
-msgstr "Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Normal modem connection"
+msgstr "Щ€ШµЩ„Ш© Щ…Щ€ШЇЩ… Ш№Ш§ШЇЩЉШ©"
 
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "%s on %s"
-msgstr "%s Ш№Щ„Щ‰ %s"
+msgid "File Selection"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Bootloader"
-msgstr "Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
+"Щ…Ш§ Щ‡ЩЉ ШЄЩ‡ЩЉШ¦Ш© ISDN Ш§Щ„ШЄЩЉ ШЄЩЃШ¶Щ„Щ‡Ш§Шџ\n"
+"\n"
+"* Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ‚ШЇЩЉЩ…Ш© ШЄШіШЄШ®ШЇЩ… isdn4net. Щ€ Щ‡ЩЉ ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ\n"
+"  Щ‚Щ€ЩЉШ© Щ€ Щ„ЩѓЩ†Щ‡Ш§ ШµШ№ШЁШ© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, Щ€ ШєЩЉШ± Щ‚ЩЉШ§ШіЩЉШ©.\n"
+"\n"
+"* Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ© ШЈШіЩ‡Щ„ ЩЃЩЉ Ш§Щ„ЩЃЩ‡Щ…, Щ€ ШЈЩѓШ«Ш±\n"
+"  Щ‚ЩЉШ§ШіЩЉШ©, Щ€ Щ„ЩѓЩ† Щ…Ш№ ШЈШЇЩ€Ш§ШЄ ШЈЩ‚Щ„.\n"
+"\n"
+"Щ†Ш­Щ† Щ†ЩЃШ¶Щ‘Щ„ Щ„Щѓ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ЩЃЩЉЩЃШ©.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Boot"
-msgstr "Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "disabled"
-msgstr "Щ…Ш№Ш·Щ„"
+msgid "Run config tool"
+msgstr "ШґШєЩ‘Щ„ ШЈШЇШ§Ш© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "activated"
-msgstr "Щ…Щ†ШґЩ‘Ш·"
+msgid "Bootloader installation"
+msgstr "ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Firewall"
-msgstr "Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ"
+msgid "Root partition size in MB: "
+msgstr "Ш­Ш¬Щ… Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ© ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Security"
-msgstr "Ш§Щ„ШЈЩ…Щ†"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© Ш§Щ„ШІШ§Щ…ЩЉШ©, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш№ШЇЩ… Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Security Level"
-msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
+msgid "Etherboot ISO image is %s"
+msgstr "Etherboot ISO image Щ‡ЩЉ %s"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Network"
-msgstr "Ш§Щ„ШґШЁЩѓШ©"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) Щ‡Щ€ Ш®Ш§ШЇЩ… ШЈШіЩ…Ш§ШЎ Щ†Ш·Ш§Щ‚ (DNS) Щ€ Ш§Щ„Ш°ЩЉ ЩЉШіШЄШ®ШЇЩ… Щ„Щ…Ш№Ш±ЩЃШ© ШЈШіЩ…Ш§ШЎ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ "
+"ШЈЩ€ Ш№Щ†Ш§Щ€ЩЉЩ† IP."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Network & Internet"
-msgstr "Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Disconnect..."
+msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Graphical interface"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©"
+msgid "Saint Lucia"
+msgstr "ШіШ§Щ†ШЄ Щ„Щ€ШіЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Hardware"
-msgstr "Ш§Щ„Ш№ШЄШ§ШЇ"
+msgid "Report"
+msgstr "ШЄЩ‚Ш±ЩЉШ±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TV card"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
+msgid "Palau"
+msgstr "ШЁШ§Щ„Ш§Щ€"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ. Ш­Ш§Щ€Щ„ ШЄШґШєЩЉЩ„ \"harddrake\" ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "level"
+msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr "ШґШєЩ‘Щ„ \"sndconfig\" ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЄЩ‡ЩЉШ¦Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr "ЩѓЩ„ Щ…ШґЩѓЩ„Ш© ШіЩЉШЄЩ… ШЄШЄШЁШ№Щ‡Ш§ Щ…Щ† Ш®ШЁЩЉШ± Щ€Ш§Ш­ШЇ Щ…Ш№ШЄЩ…ШЇ Щ…Щ† MandrakeSoft."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Щ‡Щ„ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ ISAШџ"
+msgid "Package Group Selection"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± Щ…Ш¬Щ…Щ€Ш№Ш§ШЄ Ш§Щ„Ш­ШІЩ…"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sound card"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
+msgid "Restore Via Network Protocol: %s"
+msgstr "Ш§ШіШЄШ№ШЇ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШґШЁЩѓШ©: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Ш®Ш§ШЇЩ… CUPS ШЁШ№ЩЉШЇ"
+msgid "You can configure each parameter of the module here."
+msgstr "ЩЉЩ…ЩѓЩ†Щѓ ШЄЩ‡ЩЉШ¦Ш© ЩѓЩ„ Щ…Ш№Ш§Щ…Щ„ Щ„Щ„Щ€Ш­ШЇШ© Щ‡Щ†Ш§."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Щ„Ш§ Ш·Ш§ШЁШ№Ш©"
+msgid "Choose the resolution and the color depth"
+msgstr "Ш§Ш®ШЄШ± ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ€ Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ…"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Printer"
-msgstr "Ш·Ш§ШЁШ№Ш©"
+msgid "Emulate third button?"
+msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± Ш§Щ„Ш«Ш§Щ„Ш«Шџ"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mouse"
-msgstr "Ш§Щ„ЩЃШЈШ±Ш©"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
+"Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©\n"
+"(Щ„ШЈЩ†Щѓ Щ€ШµЩ„ШЄ Ш§Щ„Щ‰ Ш§Щ„Ш№ШЇШЇ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ©).\n"
+"ШЈЩ€Щ„Ш§Щ‹ Ш§Ш®Ш°ЩЃ ШЄШ¬ШІШ¦Ш© ШЈШіШ§ШіЩЉШ© Щ€ Щ‚Щ… ШЁШҐЩ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш© Щ…Щ…ШЄШЇШ©."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Timezone"
-msgstr "Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШІЩ…Щ†ЩЉШ©"
+msgid "Mount"
+msgstr "Ш­Щ…Щ„"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­"
+msgid "Creating auto install floppy"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Summary"
-msgstr "Щ…Щ„Ш®Шµ"
+msgid "Install updates"
+msgstr "ШЄШ«ШЁЩЉШЄ ШЄШ­ШЇЩЉШ«Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "NTP Server"
-msgstr "Ш®Ш§ШЇЩ… NTP"
+msgid "text box height"
+msgstr "Ш§Ш±ШЄЩЃШ§Ш№ Ш§Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "ШЄШІШ§Щ…Щ† Щ€Щ‚ШЄ ШўЩ„ЩЉ (ШЁШ§ШіШЄШ®ШЇШ§Щ… NTP)"
+msgid "State"
+msgstr "Ш§Щ„Ш­Ш§Щ„Ш©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш¶ШЁЩ€Ш·Ш© Ш№Щ„Щ‰ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ"
+msgid "Be sure a media is present for the device %s"
+msgstr "ШЄШЈЩѓШЇ Щ…Щ† Щ€Ш¬Щ€ШЇ Ш§Щ„Щ€ШіЩЉШ· Щ„Щ„Щ€Ш­ШЇШ©  %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Щ…Ш§ Щ‡ЩЉ Щ…Щ†Ш·Щ‚ШЄЩѓ Ш§Щ„ШІЩ…Щ†ЩЉШ©Шџ"
+msgid "Enable multiple profiles"
+msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШЄШґЩѓЩЉЩ„Ш§ШЄ Ш§Щ„Щ…ШЄШ№ШЇШЇШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Would you like to try again?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…Ш­Ш§Щ€Щ„Ш© Щ…Ш±Ш©Щ‹ ШЈШ®Ш±Щ‰Шџ"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ЩЉЩ…ЩѓЩ†Щ‡Ш§ Щ†ШіШ® Щ€ Ш§ШіШЄШ±Ш¬Ш§Ш№ ЩѓЩ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ ЩЃЩЉ ШЇЩ„ЩЉЩ„ /etc.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Unable to contact mirror %s"
-msgstr "ШЄШ№Ш°Ш± Ш§?ШЄШµШ§Щ„ ШЁШ§Щ„Щ…Ш±ШўШ© %s"
+msgid "Local printer"
+msgstr "Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„Щ…Ш±ШўШ© Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
+msgid "Files Restored..."
+msgstr "Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ№Ш§ШЇШ©..."
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Ш§Ш®ШЄШ± Щ…Ш±ШўШ© ШіЩЉШЄЩ… Щ…Щ† Ш®Щ„Ш§Щ„Щ‡Ш§ ШЄЩ†ШІЩЉЩ„ Ш§Щ„Ш­ШІЩ…"
+msgid "Package selection"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr ""
-"Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩ…Щ€Щ‚Ш№ Mandrake Linux Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Щ…Ш±Ш§ЩЉШ§ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
+msgid "Mauritania"
+msgstr "Щ…Щ€Ш±ЩЉШЄШ§Щ†ЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
 "\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
 "\n"
-"Do you want to install the updates ?"
 msgstr ""
-"ШЄШіШЄШ·ЩЉШ№ Ш§Щ„ШўЩ† ШЄЩ†ШІЩЉЩ„ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш­ШЇЩ‘Ш«Ш©. Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…\n"
-"ШЄЩ… ШЄШ­ШЇЩЉШ«Щ‡Ш§ ШЁШ№ШЇ Ш§ШµШЇШ§Ш± Ш§Щ„ШЄЩ€ШІЩЉШ№Ш©. Щ‚ШЇ\n"
-"ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Ш§ШµЩ„Ш§Ш­Ш§ШЄ ШЈЩ…Щ†ЩЉШ© ШЈЩ€ Ш§ШµЩ„Ш§Ш­Ш§ШЄ Щ„Ш№ЩЉЩ€ШЁ ШЁШ±Щ…Ш¬ЩЉШ©.\n"
+"ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш­ЩЃШё Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Щ€ Ш§ЩЃШЄШ±Ш§Ш¶ ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… DHCP Щ…ШіШЁЩ‚Ш§Щ‹; ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ "
+"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щ†ЩЉ ШЈШіШЄШ·ЩЉШ№ Щ‚Ш±Ш§ШЎШ© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ Щ„Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­; "
+"ШіШЈЩ‚Щ€Щ… ШЁШҐШ№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Щ€ Щ„Щ† ШЈЩ‚Щ€Щ… ШЁШЈЩЉ ШґШ¦ ШЄШ¬Ш§Щ‡ ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
 "\n"
-"Щ„ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…, ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ Ш§ШЄШµШ§Щ„ \n"
-"ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"Щ…ШЇШ®Щ„ DNS Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ Ш§ШіЩ… Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЁШ¦ЩЉ Ш№Щ„Щ‰ Ш§Щ„Ш¬ШЇШ§Ш± Ш§Щ„Щ†Ш§Ш±ЩЉ. ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЁШЇШ§Щ„ Ш°Щ„Щѓ "
+"ШЁШ№Щ†Щ€Ш§Щ† IP Щ„Щ„ЩЂDNS Ш§Щ„Ш®Ш§Шµ ШЁЩ…Щ€ЩЃШ± Ш®ШЇЩ…Ш© Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ, Щ…Ш«Щ„.\n"
+"\t\t      \n"
+"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Щ€ Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP Щ„Щѓ.\n"
 "\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ Шџ"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ€Ш­ШЇШ§ШЄ Ш§Щ„ШЄШ­ШЇЩЉШ« ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Ш°ЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡ ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Post-install configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
 msgstr ""
-"Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s\n"
-"%d%%"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Preparing installation"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Ш¶ЩЉШ± Щ„Щ„ШЄШ«ШЁЩЉШЄ"
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©! Щ„ШЄШ«ШЁЩЉШЄ Ш·Ш§ШЁШ№Ш© ЩЉШЇЩ€ЩЉШ§Щ‹ Ш§ШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ "
+"Ш§Щ„ШҐШЇШ®Ш§Щ„ (Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ©: /dev/lp0, /dev/lp1, ..., Щ…Щ…Ш§Ш«Щ„Ш© Щ„ЩЂLPT1:, "
+"LPT2:, ..., Ш·Ш§ШЁШ№Ш© USB Ш§Щ„ШЈЩ€Щ„Щ‰: /dev/usb/lp0, Ш·Ш§ШЁШ№Ш© USB Ш§Щ„Ш«Ш§Щ†ЩЉШ©: /dev/usb/"
+"lp1, ...)."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш§Щ„Щ…ШіЩ…Щ‰ \"%s\""
+msgid "All primary partitions are used"
+msgstr "ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ© Щ…ШіШЄШ®ШЇЩ…Ш©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ‚Щ„ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШЇЩ†Ш§Щ‡, Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚.\n"
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩ…ЩѓЩ† Щ„ШЇЩЉЩѓ ШЈЩЉ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ, Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ.\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШЁШ№Ш¶ Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Щ…ЩЃЩ‚Щ€ШЇШ©, Щ‚Щ… ШЁШ§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§Ш«Щ… Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚."
+"ШЁШ№ШЇ Ш№Щ…Щ„ Ш°Щ„Щѓ, Щ†Щ†ШµШ­ ШЁШҐШ№Ш§ШЇШ© ШЄШґШєЩЉЩ„ ШЁЩЉШ¦Ш© X Щ„ШЇЩЉЩѓ Щ„ШЄЩЃШ§ШЇЩЉ ШЈЩЉ Щ…ШґШ§ЩѓЩ„ ШЄШЄШ№Щ„Щ‚ ШЁШҐШіЩ… "
+"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
 #, c-format
-msgid "All"
-msgstr "Ш§Щ„ЩѓЩ„"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "ШЄШ­Щ‚Щ‚ Щ€ ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ© Щ„Щ„Ш№ШЄШ§ШЇ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "ШЄШ«ШЁЩЉШЄ Щ…ШµШєЩ‘Ш± ЩЃШ№Щ„Ш§Щ‹ (Ш®ШµЩ€ШµШ§Щ‹ ШЁШЇЩ€Щ† urpmi)"
+msgid "Installation Server Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш§Щ„Ш«ШЁЩЉШЄ"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "Щ…Ш№ Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ© Ш§Щ„ШЈШіШ§ШіЩЉШ© (Щ…ЩЃШ¶Щ‘Щ„)"
+msgid "Configuring IDE"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© IDE"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "With X"
-msgstr "Щ…Ш№ X"
+msgid "Network functionality not configured"
+msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ­ШЇЩЉШЇ Щ€ШёЩЉЩЃЩЉШ© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
-"Щ„Щ… ШЄШ®ШЄШ± ШЈЩЉ Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш§Щ„Ш­ШІЩ….\n"
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…ШµШєШ± Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇЩ‡:"
+msgid "Configure module"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш­ШЇШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Type of install"
-msgstr "Щ†Щ€Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Cocos (Keeling) Islands"
+msgstr "Ш¬ШІШ± Ш§Щ„ЩѓЩ€ЩѓЩ€Ші"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Щ…Ш®ШЄШ§Ш± ШЈЩѓШЁШ± Щ…Щ† Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid "Disconnecting from the Internet "
+msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "ШЈШЇШ®Щ‡Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„Щ…Ш­ШЄЩ€Щ‰ Ш№Щ„Щ‰ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш­ШІЩ…"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„ Щ‚ШЁЩ„ ШЈЩ† ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШ№ШЇЩЉЩ„Ш§ШЄ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Loading from floppy"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†"
+msgid "Provider phone number"
+msgstr "Ш±Щ‚Щ… Щ‡Ш§ШЄЩЃ Ш§Щ„Щ…Щ€ЩЃШ±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Package selection"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
+msgid "Host %s"
+msgstr "Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
+msgid "Armenia"
+msgstr "ШЈШ±Щ…ЩЉЩ†ЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Ш­Щ…Щ‘Щ„ Щ…Щ† Щ‚Ш±Шµ Щ…Ш±Щ†"
+msgid "Fiji"
+msgstr "ЩЃЩЉШ¬ЩЉ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
-"ЩЃШ¶Щ„Ш§ЩЏ Ш§Ш®ШЄШ± Ш­ЩЃШё ШЈЩ€ ШЄШ­Щ…ЩЉЩ„ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ Щ„Щ„Ш­ШІЩ… Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†.\n"
-"Ш§Щ„Щ†ШіЩ‚ Щ…ШґШ§ШЁЩ‡ Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Ш§Щ„Щ…Ш±Щ†Ш©."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ ЩЃЩЉ Щ†ШёШ§Щ…Щѓ Щ…ШіШ§Ш­Ш© Щ…ШЄШЁЩ‚Ш© ШЄЩѓЩЃЩЉ Щ„Щ„ШЄШ«ШЁЩЉШЄ ШЈЩ€ Ш§Щ„ШЄШ±Щ‚ЩЉШ© (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш№Ш«Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШіШЄШЄЩ… ШЄШ±Щ‚ЩЉШЄЩ‡Ш§..."
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Looking at packages already installed..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш«ШЁШЄШ© Щ…ШіШЁЩ‚Ш§Щ‹..."
+msgid "Second floppy drive"
+msgstr "ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„Ш«Ш§Щ†ЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ€ Ш§Ш№ШЇШ§Ш© ШЁЩ†Ш§ШЎ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ rpm..."
+msgid "About Harddrake"
+msgstr "Ш­Щ€Щ„ HardDrake"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ШЄШЁШЇЩЉЩ„ ЩѓШ§ЩЃЩЉШ© Щ„Щ„Щ‚ЩЉШ§Щ… ШЁШ§Щ„ШЄШ«ШЁЩЉШЄ, ЩЃШ¶Щ„Ш§Щ‹ ШІШЇ Щ…ШіШ§Ш­Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„"
+msgid "Drive capacity"
+msgstr "Ш­Ш¬Щ… Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
 msgstr ""
-"ШЄШ№Ш°Ш± Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Щ†ШёШ§Щ… Ш§Щ„Щ…ЩЃШ§ШЄ %s. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШµШ­ЩЉШ­ Ш§Щ„ШЈШ®Ш·Ш§ШЎ (ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹, ЩЉЩ…ЩѓЩ† ШЈЩ† "
-"ШЄШ®ШіШ± ШЁЩЉШ§Щ†Ш§ШЄ)"
+"ШЈШЇШ®Щ„ Щ‚Ш±ШµШ§ Щ…Ш±Щ†Ш§ ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©\n"
+"ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ ШіШЄЩ…Ш­Щ‰"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЁЩ„Щ€ЩѓШ§ШЄ Ш§Щ„ШіЩЉШ¦Ш©Шџ"
+msgid "Size: %s"
+msgstr "Ш§Щ„Ш­Ш¬Щ…: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ¬Щ‡ЩЉШІЩ‡Ш§"
+msgid "Control and Shift keys simultaneously"
+msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Control Щ€ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№ШЇШ§Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШ№ШЇЩЉЩ„Ш§ШЄ Ш№Щ„Щ‰ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ"
+msgid "secondary"
+msgstr "Ш«Ш§Щ†Щ€ЩЉ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
-msgstr ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "View Backup Configuration."
+msgstr "Ш§Ш№Ш±Ш¶ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the mount points"
-msgstr "Ш§Ш®ШЄШ± Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid "if set to yes, report check result to syslog."
+msgstr "if set to yes, report check result to syslog."
 
-#: ../../install_steps_interactive.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш№Щ…Щ„ Щ…ШіШ­ Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ШҐЩЉШ¬Ш§ШЇ Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid "No password"
+msgstr "Щ„Ш§ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш©"
+msgid "Nigeria"
+msgstr "Щ†ЩЉШ¬ЩЉШ±ЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© IDE"
+msgid "There is no existing partition to use"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr ""
+"Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
+"\n"
+"%s\n"
+"Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ†ШёШ§Щ…Щѓ.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© ШЁШ·Ш§Щ‚Ш§ШЄ PCMCIA..."
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш·Ш§ШЁШ№Ш© TCP ШЈЩ€ socket, ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP "
+"Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ§Щ‹ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш¶Ш§ЩЃШ© Ш±Щ‚Щ… Щ…Щ†ЩЃШ° Ш§Щ„Ш·Ш§ШЁШ№Ш© (Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ 9100). "
+"Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ HP JetDirect ЩЉЩѓЩ€Щ† Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш№Ш§ШЇШ©Щ‹ Щ‡Щ€ 9100, Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ "
+"ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Ш§Щ„Ш±Щ‚Щ… ШєЩЉШ± Ш°Щ„Щѓ. Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ„Ш№ШЄШ§ШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Hard drive information"
+msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± 3"
+msgid "Russian"
+msgstr "Ш§Щ„Ш±Щ€ШіЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± 2"
+msgid "Jordan"
+msgstr "Ш§Щ„ШЈШ±ШЇЩ†"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШЈШІШ±Ш§Ш±"
+msgid "Hide files"
+msgstr "Ш®ШЁШ¦ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШЄШіЩ„ШіЩ„ЩЉ Ш§Щ„Щ…Щ€ШµЩ„Ш© ШЁЩ‡ Ш§Щ„ЩЃШЈШ±Ш©"
+msgid "Auto-detect printers connected to this machine"
+msgstr "ШЄШ­Щ‚Щ‚ ШЈЩ„ЩЉШ§ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Щ…Щ†ЩЃШ° Ш§Щ„ЩЃШЈШ±Ш©"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
+"XawTV ШєЩЉШ± Щ…Ш«ШЁЩ‘ШЄ!\n"
+"\n"
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ Щ„ЩѓЩ† Щ„Щ… ЩЉШіШЄШ·Ш№ DrakX Ш§ЩѓШЄШґШ§ЩЃЩ‡Ш§ (Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ€Ш­ШЇШ§ШЄ bttv "
+"Щ€Щ„Ш§ saa7134\n"
+"ЩЃЩЉ \"/etc/modules\") ШЈЩ€ Щ„Щ… ШЄШ«ШЁЩ‘ШЄ xawtv, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШ±ШіШ§Щ„ Щ†ШЄШ§Ш¦Ш¬\n"
+"Ш§Щ„ШЈЩ…Ш± \"lspcidrake -v -f\" Ш§Щ„Щ‰ \"install\\@mandrakesoft.com\"\n"
+"Щ…Ш№ Ш§Щ„Ш№Щ†Щ€Ш§Щ† \"undetected TV card\".\n"
+"\n"
+"\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ XawTV ШЁЩѓШЄШ§ШЁШ© Ш§Щ„ШЈЩ…Ш± \"urpmi xawtv\" ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose your type of mouse."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш©."
+msgid "Sorry, no floppy drive available"
+msgstr "ШўШіЩЃ , Щ„Ш§ Щ…ШЇШ®Щ„ Щ…Ш±Щ† Щ…ШЄШ§Ш­"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bolivia"
+msgstr "ШЁЩ€Щ„ЩЉЩЃЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Upgrade %s"
-msgstr "ШЄШ±Щ‚ЩЉШ© %s"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… Windows Щ„Ш¬Ш№Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…ШЄЩ€ЩЃШ±Ш© ШЄШ­ШЄ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ IPP Щ€ Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ "
+"Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© \"%s\" ЩЃЩЉ Printerdrake.\n"
+"\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Щ‡Щ„ Щ‡Ш°Ш§ ШЄШ«ШЁЩЉШЄ ШЈЩ… ШЄШ±Щ‚ЩЉШ©Шџ"
+msgid "Bad package"
+msgstr "Ш­ШІЩ…Ш© ШіЩЉШ¦Ш©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Install/Upgrade"
-msgstr "ШЄШ«ШЁЩЉШЄ/ШЄШ±Щ‚ЩЉШ©"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Ш­Щ€Щ‘Щ„ Ш¬Щ‡Ш§ШІЩѓ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Щ„ЩЉЩ†ЩѓШі Щ‚Щ€ЩЉ ШЁЩ†Щ‚Ш±Ш§ШЄ Щ‚Щ„ЩЉЩ„Ш© Щ…Щ† Ш§Щ„ЩЃШЈШ±Ш©: Ш®Ш§ШЇЩ… Щ€ЩЉШЁ, ШЁШ±ЩЉШЇ, Ш¬ШЇШ§Ш± "
+"Щ†Ш§Ш±ЩЉ, Щ…Щ€Ш¬Щ‘Щ‡, Ш®Ш§ШЇЩ… Щ…Щ„ЩЃШ§ШЄ Щ€ Ш·ШЁШ§Ш№Ш©, ..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid "DrakSec Basic Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ DrakSec Ш§Щ„ШЈШіШ§ШіЩЉШ©"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Ш±Ш¬Ш§ШЎ, Ш§Ш®ШЄШ± Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­."
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
+"\n"
+"\n"
+"\n"
+"Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ ISA PnP, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіШЄШ®ШЇШ§Щ… ШЁШ±Щ†Ш§Щ…Ш¬ "
+"sndconfig. ЩЃЩ‚Ш· Ш№Щ„ЩЉЩѓ ЩѓШЄШ§ШЁШ© \"sndconfig\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Quit"
-msgstr "Ш®Ш±Щ€Ш¬"
+msgid "Romania"
+msgstr "Ш±Щ€Щ…Ш§Щ†ЩЉШ§"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "License agreement"
-msgstr "Ш§ШЄЩЃШ§Щ‚ЩЉШ© Ш§Щ„ШЄШ±Ш®ЩЉШµ"
+msgid "choose device"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш¬Щ‡Ш§ШІ "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "An error occurred"
-msgstr "ШёЩ‡Ш± Ш®Ш·ШЈ"
+msgid "Canada"
+msgstr "ЩѓЩ†ШЇШ§"
 
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid "Remove from LVM"
+msgstr "Ш§ШІШ§Щ„Ш© Щ…Щ† LVM"
 
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "ШЄШ«ШЁЩЉШЄ Mandrake Linux %s"
+msgid "Timezone"
+msgstr "Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШІЩ…Щ†ЩЉШ©"
 
-#: ../../install_steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШіЩ€Ш§Щ‚Ш© ШЈЩ‚Ш±Ш§Шµ Щ…Ш±Щ†Ш©"
+msgid "German"
+msgstr "Ш§Щ„ШЈЩ„Щ…Ш§Щ†ЩЉШ©"
 
-#: ../../install_steps.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "ШЈЩ‡Щ„Ш§ ШЁЩѓЩ… ЩЃЩЉ %s"
+msgid "Next ->"
+msgstr "Ш§Щ„ШЄШ§Щ„ЩЉ ->"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
-"Щ„Щ… ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ ШЁШ№Ш¶ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Щ‡Щ…Ш© ШЁШґЩ„ ШµШ­ЩЉШ­.\n"
-"ШҐЩ…Ш§ ШЈЩ† ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЈЩ€ ШЈЩ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Щ†ЩЃШіЩ‡ ШЁЩ‡ Ш№ЩЉШЁ Щ…Ш§.\n"
-"ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш№Щ„Щ‰ ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ…Ш«ШЁЩ‘ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± \"rpm -qpl Mandrake/"
-"RPMS/*.rpm\"\n"
-
-#: ../../install_steps.pm:1
-#, c-format
-msgid "Duplicate mount point %s"
-msgstr "Щ†Щ‚Ш·Ш© ШЄШ­Щ…ЩЉЩ„ Щ…ЩѓШ±Ш±Щ‘Ш© %s"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
-"ШёЩ‡Ш± Ш®Ш·ШЈ Щ€ Щ„Ш§ ШЈШ№Ш±ЩЃ ЩѓЩЉЩЃ ШЈШЄШ№Ш§Щ…Щ„ Щ…Ш№Щ‡ ШЁШЈШіЩ„Щ€ШЁ Ш¬ЩЉШЇ.\n"
-"ШЄШ§ШЁШ№ Ш№Щ„Щ‰ Щ…ШіШ¤Щ€Щ„ЩЉШЄЩѓ."
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Щ†ШЄШёШ±"
+msgid "Guinea-Bissau"
+msgstr "ШєЩЉЩ†ЩЉШ§-ШЁЩЉШіШ§Щ€"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Ok"
-msgstr "Щ…Щ€Ш§ЩЃЩ‚"
+msgid "Horizontal refresh rate"
+msgstr "Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„ШЈЩЃЩ‚ЩЉ"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Finish"
-msgstr "ШҐЩ†ШЄЩ‡Ш§ШЎ"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Щ„Щ… ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© ШЄШ№ЩЉЩЉЩ† Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ†ШёШ±Ш§ Щ„ШЈЩ† Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© Щ…ШіШЄШ®ШЇЩ…Ш© Щ„ЩЂloop back.\n"
+"Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ЩЂloopback ШЈЩ€Щ„Ш§"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Basic"
-msgstr "ШЈШіШ§ШіЩЉ"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
+"Щ„Ш§ ЩЉЩ…ЩѓЩ† ШЁШЇШЎ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШЄЩ… Ш№Щ…Щ„Щ‡Ш§ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ†. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Ш§Ш°Ш§ ЩѓШ§Щ† "
+"ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЁШ№ШЇ  Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„Щ†ШёШ§Щ… Щ€ ШµШ­Щ‘Ш­ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… "
+"Mandrake ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ\"/\"Ш§Щ„Щ€ШµЩ„Ш§ШЄ\", Щ€ ШЁШ№ШЇ Ш°Щ„Щѓ Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©, ЩѓШ°Щ„Щѓ ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш№ШЄШ§ШЇ\"/\"Ш§Щ„Ш·Ш§ШЁШ№Ш©\""
 
-#: ../../interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "Щ…ШЄЩ‚ШЇЩ…"
+msgid "USB controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ USB"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Remove"
-msgstr "Ш§Ш­Ш°ЩЃ"
+msgid "What norm is your TV using?"
+msgstr "ШЈЩЉ Щ†ШёШ§Щ… ЩЉШіШЄШ®ШЇЩ…Щ‡ Ш¬Щ‡Ш§ШІ Ш§Щ„ШЄЩ„ЩЃШ§ШІ Щ„ШЇЩЉЩѓШџ"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Modify"
-msgstr "ШЄШ№ШЇЩЉЩ„"
+msgid "Type:"
+msgstr "Ш§Щ„Щ†Щ€Ш№:"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add"
-msgstr "Ш§Ш¶Ш§ЩЃШ©"
+msgid "Share name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШґШ§Ш±ЩѓШ©"
 
-#: ../../interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Choose a file"
-msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ"
+msgid "enable"
+msgstr "ШЄЩ…ЩѓЩЉЩ†"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
 msgstr ""
-"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш®ШЄШµШ§Ш±Ш§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄЩЉ \n"
-"ШіШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Щ„ШЄШЁШЇЩЉЩ„ ШЁЩЉЩ† Щ„ШєШ§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…Ш®ШЄЩ„ЩЃШ©\n"
-"(Щ…Ш«Щ„Ш§Щ‹: Щ„Ш§ШЄЩЉЩ†ЩЉ Щ€ ШєЩЉШ± Щ„Ш§ШЄЩЉЩ†ЩЉ)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Щ…ЩЃШЄШ§Ш­ \"Windows\" Ш§Щ„ШЈЩЉЩ…Щ†"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Щ…ЩЃШЄШ§Ш­ \"Windows\" Ш§Щ„ШЈЩЉШіШ±"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "Щ…ЩЃШЄШ§Ш­ \"Menu\""
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Alt Щ€ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
+"Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩ…Щ€Щ‚Ш№ Mandrake Linux Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Щ…Ш±Ш§ЩЉШ§ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Ctrl Щ€ Alt ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"ШёЩ‡Ш±ШЄ Щ…ШґЩѓЩ„Ш© ШЈШ«Щ†Ш§ШЎ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©: \n"
+"\n"
+"%s"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr "Щ…ЩЃШЄШ§Ш­ CapsLock"
+msgid "Remove the loopback file?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШІШ§Щ„Ш© Щ…Щ„ЩЃ loopbackШџ"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Control Щ€ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
+msgid "Selected size is larger than available space"
+msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Щ…Ш®ШЄШ§Ш± ШЈЩѓШЁШ± Щ…Щ† Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Щ…ЩЃШЄШ§Ш­ЩЉЩ‘ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
+msgid "NCP server name missing!"
+msgstr "Ш§ШіЩ… Ш®Ш§ШЇЩ… NCP Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Right Alt key"
-msgstr "Щ…ЩЃШЄШ§Ш­ Alt Ш§Щ„ШЈЩЉЩ…Щ†"
+msgid "Please choose your country."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± ШЁЩ„ШЇЩѓ."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Ш§Щ„ЩЉЩ€ШєЩ€ШіЩ„Ш§ЩЃЩЉШ© (Щ„Ш§ШЄЩЉЩ†ЩЉ)"
+msgid "Hard Disk Backup files..."
+msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ„Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ..."
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Ш§ЩЃЩЉШЄЩ†Ш§Щ…ЩЉШ© \"ШµЩЃ Ш±Щ‚Щ…ЩЉ\" QWERTY"
+msgid "Laotian"
+msgstr "Ш§Щ„Щ„Ш§Щ€ШіЩЉШ©"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ ШЈЩ…Ш±ЩЉЩѓЩЉШ© (ШЇЩ€Щ„ЩЉ)"
+msgid "Samoa"
+msgstr "ШіШ§Щ…Щ€Ш§"
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ©"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rstat ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЁШ§ШіШЄШ±Ш¬Ш§Ш№\n"
+"Ш§Ш­ШµШ§Ш¦ЩЉШ§ШЄ ШўШЇШ§ШЎ ШЈЩЉ Ш¬Щ‡Ш§ШІ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШґШЁЩѓШ©."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "UK keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ©"
+msgid "Re-generating list of configured scanners ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄЩ€Щ„ЩЉШЇ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш№ШЇЩ‘Ш© ..."
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Ш§Щ„ШЈЩ€ЩѓШ±Ш§Щ†ЩЉШ©"
+msgid "Scanner"
+msgstr "Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Ш§Щ„ШЄШ±ЩѓЩЉШ© (Ш·Ш±Ш§ШІ \"Q\" Ш§Щ„Ш­ШЇЩЉШ«)"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "ШЄШ­Ш°ЩЉШ±: Ш§Ш®ШЄШЁШ§Ш± ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ‡Ш°Щ‡ Щ‚ШЇ ЩЉШЄШіШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Ш§Щ„ШЄЩ‘Ш±ЩѓЩЉШ© (Ш·Ш±Ш§ШІ \"F\" Ш§Щ„ШЄЩ‚Щ„ЩЉШЇЩЉ)"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„Ш­Ш±Щ€ЩЃ Ш§Щ„ШµШєЩЉШ±Ш©, Ш§Щ„ШЈШ±Щ‚Ш§Щ…, `-' Щ€ `_'"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Tajik keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Ш·Ш§Ш¬ЩЉЩѓЩЉШ©"
+msgid "Menudrake"
+msgstr "Menudrake"
 
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄШ§ЩЉЩ„Ш§Щ†ШЇЩЉШ©"
+msgid "Welcome To Crackers"
+msgstr "Щ…Ш±Ш­ШЁШ§ ШЁШ§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†"
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Ш§Щ„ШЄШ§Щ…ЩЉЩ„ (ШўЩ„Ш© ЩѓШ§ШЄШЁШ©)"
+msgid "Module options:"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ€Ш­ШЇШ©:"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Ш§Щ„ШЄШ§Щ…ЩЉЩ„ (ISCII)"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Ш§Щ„ШµШ±ШЁЩЉШ© (ШіЩЉШ±ЩЉЩ„ЩЉ)"
+msgid "Go on without configuring the network"
+msgstr "ШЄШ§ШЁШ№ ШЇЩ€Щ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Ш§Щ„ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ© (QWERTY)"
+msgid "Abort"
+msgstr "ШҐЩ†Щ‡Ш§ШЎ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Ш§Щ„ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ© (QWERTZ)"
+msgid "No password prompt on %s at port %s"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Ш·Щ„ШЁ ЩѓЩ„Щ…Ш© ШіШ± ЩЃЩЉ %s Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Slovenian"
-msgstr "Ш§Щ„ШіЩ„Щ€ЩЃЩЉЩ†ЩЉШ©"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr ""
+"ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш¬Щ‡Ш§ШІ ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„Щ„Ш±Ш¬Щ€Ш№ Ш§Щ„Щ‰ Ш§Щ„Ш®Щ„ЩЃ."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Swedish"
-msgstr "Ш§Щ„ШіЩ€ЩЉШЇЩЉШ©"
+msgid "Usage of remote scanners"
+msgstr "Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Ш§Щ„Ш±Щ‘Щ€ШіЩЉШ© (Yawerty)"
+msgid "\t-CDROM.\n"
+msgstr "\t-Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬.\n"
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Russian"
-msgstr "Ш§Щ„Ш±Щ€ШіЩЉШ©"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Romanian (qwerty)"
-msgstr "Ш§Щ„Ш±Щ€Щ…Ш§Щ†ЩЉШ© (qwertz)"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Щ†Ш±Щ€ЩЉШ¬ЩЉШ©Щ‘)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Romanian (qwertz)"
-msgstr "Ш§Щ„Ш±Щ€Щ…Ш§Щ†ЩЉШ© (qwertz)"
+msgid "Hard Disk Backup Progress..."
+msgstr "Ш§Щ„ШЄЩ‚ШЇЩ… ЩЃЩЉ Щ†ШіШ® Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ..."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "Ш§Щ„ЩѓЩ†ШЇЩЉЩ‘Ш© (ЩѓЩЉШЁЩЉЩѓ)"
+msgid "Unable to fork: %s"
+msgstr "ШЄШ№Ш°Ш± ШЄЩ†ЩЃЩЉШ°: %s"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "Ш§Щ„ШЁШ±ШЄШєШ§Щ„ЩЉШ©"
+msgid "Type: "
+msgstr "Ш§Щ„Щ†Щ€Ш№: "
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ© (qwertz layout)"
+msgid "<-- Edit Client"
+msgstr "<-- ШЄШ­Ш±ЩЉШ± Ш§Щ„Ш№Щ…ЩЉЩ„"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ© (qwerty layout)"
+msgid "no fonts found"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Ш®Ш·Щ€Ш·"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Ш§Щ„Щ†Ш±Щ€ЩЉШ¬ЩЉШ©"
+msgid "Mouse"
+msgstr "Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../keyboard.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "Ш§Щ„Щ‡Щ€Щ„Щ†ШЇЩЉШ©"
+msgid "not enough room in /boot"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Щ€ ЩѓШ§ЩЃЩЉШ© ЩЃЩЉ /boot"
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr "Ш§Щ„Щ…Ш§Щ„Ш·ЩЉШ© (ШЈЩ…Ш±ЩЉЩѓШ§)"
+msgid "Choosing an arbitratry driver"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„ Ш№Ш§Щ…"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Maltese (UK)"
-msgstr "Ш§Щ„Щ…Ш§Щ„Ш·ЩЉШ© (ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ§)"
+msgid "Host name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Ш§Щ„Щ…Щ†ШєЩ€Щ„ЩЉШ© (ШіЩЉШ±ЩЉЩ„ЩЉШ©)"
+msgid "Liechtenstein"
+msgstr "Щ„ЩЉШґШЄЩ†ШґШЄШ§ЩЉЩ†"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Щ…ЩЉШ§Щ†Щ…Ш§Ш± (Ш§Щ„ШЁЩ€Ш±Щ…ЩЉШ©)"
+msgid "the color of the progress bar"
+msgstr "Щ„Щ€Щ† ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Macedonian"
-msgstr "Ш§Щ„Щ…Щ‚ШЇЩ€Щ†ЩЉШ©"
+msgid "Suppress Fonts Files"
+msgstr "ШЈШЁШ·Щ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Malayalam"
-msgstr "Ш§Щ„Щ…Ш§Щ„Ш§ЩЉШ§Щ„Ш§Щ…"
+msgid "Add to RAID"
+msgstr "Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ RAID"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Latvian"
-msgstr "Ш§Щ„Щ„Ш§ШЄЩЃЩЉШ©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
+"or a variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© \"ШµЩ€ШЄЩЉ\" QWERTY"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr "ШЄЩ…ШЄ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP ШЁЩ†Ш¬Ш§Ш­."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© \"ШµЩЃ Ш±Щ‚Щ…ЩЉ\" QWERTY"
+msgid "No floppy drive available!"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШіЩ€Ш§Щ‚Ш© Щ‚Ш±Шµ Щ…Ш±Щ†!"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© AZERTY (Ш¬ШЇЩЉШЇ)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
+"Щ„Щ„Щ…Ш№Ш±ЩЃШ© Ш­Щ€Щ„ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©, ШҐЩ…Ш§ ШЈЩ† ШЄЩ‚Ш±ШЈ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШЇЩ†Ш§Щ‡ Щ€ "
+"Ш§Щ†Щ‚Ш± \"Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©\".%s%s\n"
+"\n"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© AZERTY (Щ‚ШЇЩЉЩ…)"
+msgid "Continue anyway?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш§ЩѓЩ…Ш§Щ„ Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Laotian"
-msgstr "Ш§Щ„Щ„Ш§Щ€ШіЩЉШ©"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Ш·Ш§ШЁШ№ШЄ Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©, ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€Ш§ЩЃЩ‚Ш© (Ш§Щ†ШёШ± ШЇЩ„ЩЉЩ„  "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©) ШЈЩ€ Ш§Ш®ШЄШ± Ш·Ш§ШЁШ№Ш© Щ…Щ…Ш§Ш«Щ„Ш©."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Latin American"
-msgstr "Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ© Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉШ©"
+msgid "Printer"
+msgstr "Ш·Ш§ШЁШ№Ш©"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ЩѓЩ€Ш±ЩЉШ©"
+msgid "Saudi Arabia"
+msgstr "Ш§Щ„ШіШ№Щ€ШЇЩЉШ©"
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ†ЩЉШ© 106 Щ…ЩЃШ§ШЄЩЉШ­"
+msgid "Internet"
+msgstr "Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Inuktitut"
-msgstr "Ш§ЩЉЩ†Щ€ЩѓШЄЩЉШЄЩ€ШЄ"
+msgid "Some devices were added:\n"
+msgstr "ШЄЩ…ШЄ Ш§Ш¶Ш§ЩЃШ© ШЁШ№Ш¶ Ш§Щ„Ш№ШЄШ§ШЇ:\n"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Italian"
-msgstr "Ш§Щ„ШҐЩЉШ·Ш§Щ„ЩЉШ©"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Ш§Щ„Щ‡Щ†ШЇШіШ©: %s Ш§ШіШ·Щ€Ш§Щ†Ш©, %s Ш±ШЈШі, %s Щ‚Ш·Ш§Ш№\n"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Icelandic"
-msgstr "Ш§Щ„ШўЩЉШіЩ„Ш§Щ†ШЇЩЉШ©"
+msgid "Printing on the printer \"%s\""
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Iranian"
-msgstr "Ш§Щ„ШҐЩЉШ±Ш§Щ†ЩЉЩ‘Ш©"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr "/etc/hosts.allow Щ€ /etc/hosts.deny Щ…Ш№ШЇЩ‘Ш§Щ† Щ…ШіШЁЩ‚Ш§Щ‹ - Щ„Щ… ЩЉШЄЩ… Ш§Щ„ШЄШєЩЉЩЉШ±"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Ш§Щ„Ш№ШЁШ±ЩЉШ© (ШµЩ€ШЄЩЉШ©)"
+msgid "Restore From Tape"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„ШґШ±ЩЉШ·"
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "Ш§Щ„Ш№ШЁШ±ЩЉШ©"
+msgid "Choose the profile to configure"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Croatian"
-msgstr "Ш§Щ„ЩѓШ±Щ€Ш§ШЄЩЉШ©"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+"\n"
+"\n"
+"ШЈШЇШ®Щ„ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf ШЁШЇЩ€Щ† ШЈЩЉ Щ†Щ‚Ш§Ш· Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ\n"
+"Ш§ШіШЄШ®ШЇШ§Щ… Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hungarian"
-msgstr "Ш§Щ„Щ…Ш¬Ш±ЩЉШ©"
+msgid "Backup Now from configuration file"
+msgstr "Щ‚Щ… ШЁШ§Щ„Щ†ШіШ® Ш§Щ„ШўЩ† Щ…Щ† Щ…Щ„ЩЃ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Gurmukhi"
-msgstr "ШєЩ€Ш±Щ…Щ€ЩѓЩ‡ЩЉ"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Щ†Щ‚Ш§ Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„Ш­Ш±Щ€ЩЃ Щ€/ШЈЩ€ Ш§Щ„ШўШ±Щ‚Ш§Щ…"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gujarati"
-msgstr "ШєЩ€Ш¬Ш§Ш±Ш§ШЄЩЉ"
+msgid "Restarting printing system..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©..."
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Greek"
-msgstr "Ш§Щ„ЩЉЩ€Щ†Ш§Щ†ЩЉШ©"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Ш§Щ„Ш¬Щ€Ш±Ш¬ЩЉШ©Щ‘ (Ш§Щ„ШЄШµЩ…ЩЉЩ… Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉ)"
+msgid "See hardware info"
+msgstr "Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Ш§Щ„Ш¬Щ€Ш±Ш¬ЩЉШ© (Ш§Щ„ШЄШµЩ…ЩЉЩ… Ш§Щ„Ш±Щ€ШіЩЉ)"
+msgid "First sector of boot partition"
+msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ€Щ„ Щ…Щ† ШЄШ¬ШІШ¦Ш© Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "French"
-msgstr "Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
+msgid "Printer manufacturer, model"
+msgstr "Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Ш·Ш±Ш§ШІ"
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "Ш§Щ„ЩЃЩ†Щ„Щ†ШЇЩЉШ©"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Print, Don't Queue"
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "Ш§Щ„ШҐШіШЁШ§Щ†ЩЉШ©"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Estonian"
-msgstr "Ш§Щ„ШҐШіШЄЩ€Щ†ЩЉШ©"
+msgid "Subnet Mask:"
+msgstr "Subnet Mask:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (ШіЩ€ЩЉШЇЩЉШ©)"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "ШЄЩ… ШЄШ«ШЁЩЉШЄ ШіЩ…Ш§ШЄ LiLo Щ€ Bootsplash ШЁЩ†Ш¬Ш§Ш­"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Щ†Ш±Щ€ЩЉШ¬ЩЉШ©Щ‘)"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§Щ† Ш§Щ„Щ…Щ‡Щ…Ш§Щ† Ш¬ШЇШ§ Щ‡Щ…Ш§ Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„ШЈЩЃЩ‚ЩЉ, Щ€ Щ‡ЩЉ Ш§Щ„Щ†ШіШЁШ© Ш§Щ„ШЄЩЉ\n"
+"ЩЉШЄЩ… ЩЃЩЉЩ‡Ш§ Ш§Щ†Ш№Ш§Шґ Ш§Щ„ШґШ§ШґШ© ЩѓШ§Щ…Щ„Ш©, Щ€ Ш§Щ„ШЈЩ‡Щ… Щ‡Щ€ Щ†ШіШЁШ© Ш§Щ„ШЄШІШ§Щ…Щ† Ш§Щ„ШЈЩЃЩ‚ЩЉ\n"
+"Щ€ Ш§Щ„ШЄЩЉ ЩЃЩЉ Ш®Щ„Ш§Щ„Щ‡Ш§ ЩЉШЄЩ… Ш№Ш±Ш¶ Ш®Ш·Щ€Ш· Ш§Щ„Щ…ШіШ­.\n"
+"\n"
+"Щ…Щ† *Ш§Щ„Щ…Щ‡Щ… Ш¬ШЇШ§* ШЈЩ† Щ„Ш§ ШЄШ­ШЇШЇ Щ†Щ€Ш№ ШґШ§ШґШ© Щ…Ш№ Щ…ШЄЩ€ШіШ· ШЄШІШ§Щ…Щ†\n"
+"ШЈЩѓШЁШ± Щ…Щ† Щ…Щ‚ШЇШ±Ш© ШґШ§ШґШЄЩѓ Щ„ШЈЩ†Щѓ ШЁЩ‡Ш°Ш§ Щ‚ШЇ ШЄШЇЩ…Ш± ШґШ§ШґШЄЩѓ.\n"
+" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш№Ш§ШЇЩЉШ©."
 
-# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
-# it displays on screen as "(US) Dvorak", following the same schema
-# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
-# that way the entry is also listed together with the other "Dvorak" entries.
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak‏ (US)"
+msgid "Modify"
+msgstr "ШЄШ№ШЇЩЉЩ„"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Ш§Щ„ШЇЩ†Щ…Ш§Ш±ЩѓЩЉШ©"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Ш§Щ„ШЈЩ€Ш§Щ…Ш± \"%s\" Щ€ \"%s\" ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ€ШёЩЉЩЃШ© Ш·ШЁШ§Ш№Ш© Щ…Ш­ШЇШЇШ©. "
+"ШЁШЁШіШ§Ш·Ш© Щ‚Щ… ШЁШҐШ¶Ш§ЩЃШ© Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш§Щ„Щ‰ ШіШ·Ш± Ш§Щ„ШўЩ€Ш§Щ…Ш±, Щ…Ш«Ш§Щ„ \"%s <file>\".\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Devanagari"
-msgstr "ШЇЩЉЩЃШ§Щ†ШєШ§Ш±ЩЉ"
+msgid "Need hostname, username and password!"
+msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ€ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ€ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±!"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "Ш§Щ„ШЈЩ„Щ…Ш§Щ†ЩЉШ© (Щ„Ш§ Щ…ЩЃШ§ШЄЩЉШ­ Щ…ЩЉШЄШ©)"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
+"WebDAV Щ‡Щ€ ШЁШ±ШЄЩ€ЩѓЩ€Щ„ ЩЉШіЩ…Ш¬ Щ„Щѓ ШЁШЄШ­Щ…ЩЉЩ„ ШЇЩ„ЩЉЩ„ ЩЃЩЉ Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ ШЁШґЩѓЩ„\n"
+"Щ…Ш­Щ„ЩЉ, Щ€ Щ…Ш№Ш§Щ…Щ„ШЄЩ‡ ЩѓЩ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Щ…Ш­Щ„ЩЉ (ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ Щ…Ш№ШЇЩ‘\n"
+"ЩѓШ®Ш§ШЇЩ… WebDAV). Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Ш¶Ш§ЩЃШ© Щ†Щ‚Ш§Ш· ШЄШ­Щ…ЩЉЩ„\n"
+"WebDAV, Ш§Ш®ШЄШ± \"Ш¬ШЇЩЉШЇ\"."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "German"
-msgstr "Ш§Щ„ШЈЩ„Щ…Ш§Щ†ЩЉШ©"
+msgid "HardDrake"
+msgstr "HardDrake"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Ш§Щ„ШЄШґЩЉЩѓЩЉШ© (QWERTY)"
+msgid "new"
+msgstr "Ш¬ШЇЩЉШЇ"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Ш§Щ„ШЄШґЩЉЩѓЩЉШ© (QWERTZ)"
+msgid "Would you like to try again?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…Ш­Ш§Щ€Щ„Ш© Щ…Ш±Ш©Щ‹ ШЈШ®Ш±Щ‰Шџ"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ© (ШЄШµЩ…ЩЉЩ… ЩЃШ±Щ†ШіЩЉ)"
+msgid "Wizard"
+msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ© (ШЄШµЩ…ЩЉЩ… ШЈЩ„Щ…Ш§Щ†ЩЉ)"
+msgid "Edit selected server"
+msgstr "Ш­Ш±Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Belarusian"
-msgstr "Ш§Щ„ШЁЩЉЩ„Ш§Ш±Щ€ШіЩЉШ©"
+msgid "Please choose where you want to backup"
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЈЩЉЩ† ШЄШ±ЩЉШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„Ш§Ш­ШЄЩЉШ§Ш·ЩЉ."
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bosnian"
-msgstr "Ш§Щ„ШЁЩ€ШіЩ†ЩЉШ©"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№ШЇШ§Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШ№ШЇЩЉЩ„Ш§ШЄ Ш№Щ„Щ‰ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Ш§Щ„ШЁШ±Ш§ШІЩЉЩ„ЩЉШ© (ABNT-2)"
+msgid "Do not include the browser cache"
+msgstr "Щ„Ш§ ШЄШіШЄШ®ШЇЩ… Ш°Ш§ЩѓШ±Ш© Ш§Щ„Щ…ШЄШµЩЃШ­ Ш§Щ„Щ…Ш®ШЁШ¦ЩЉШ©"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Ш§Щ„ШЁЩ„ШєШ§Ш±ЩЉШ© (BDS)"
+msgid "Please, choose your keyboard layout."
+msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Ш®ШЄШ± ШЄШµЩ…ЩЉЩ… Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­Щѓ"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Ш§Щ„ШЁЩ„ШєШ§Ш±ЩЉШ© (ШµЩ€ШЄЩЉШ©)"
+msgid "Standard"
+msgstr "Ш§Щ„Щ‚ЩЉШ§ШіЩЉ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Bengali"
-msgstr "Ш§Щ„ШЁЩ†ШєШ§Щ„ЩЉШ©"
+msgid "Please choose your mouse type."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹, Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Belgian"
-msgstr "Ш§Щ„ШЁЩ„Ш¬ЩЉЩѓЩЉШ©"
+msgid "Connect..."
+msgstr "Ш§ШЄШµЩ„..."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Ш§Щ„ШЈШ°Ш±ШЁЩЉШ¬Ш§Щ†ЩЉШ© (Щ„Ш§ШЄЩЉЩ†ЩЉ)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ШЄШ№Ш°Ш±ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\"!"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Arabic"
-msgstr "Ш§Щ„Ш№Ш±ШЁЩЉШ©"
+msgid "not configured"
+msgstr "ШєЩЉШ± Щ…Ш№ШЇЩ‘"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Armenian (phonetic)"
-msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (ШµЩ€ШЄЩЉ)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (ШўЩ„Ш© ЩѓШ§ШЄШЁШ©)"
+msgid "About"
+msgstr "Ш­Щ€Щ„"
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (Щ‚ШЇЩЉЩ…)"
+msgid "Proxies configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЁШ±Щ€ЩѓШіЩЉ"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Albanian"
-msgstr "Ш§Щ„ШЈЩ„ШЁШ§Щ†ЩЉШ©Щ‘"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish"
-msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ©"
+msgid "Start: sector %s\n"
+msgstr "Ш§Щ„ШЁШЇШ§ЩЉШ©: Щ‚Ш·Ш§Ш№ %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Network interface already configured"
+msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© Щ…Ш№ШЇЩ‘Ш© Щ…ШіШЁЩ‚Ш§!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "ШІЩЉЩ…ШЁШ§ШЁЩ€ЩЉ"
+msgid "Couldn't access the floppy!"
+msgstr "ШЄШ№Ш°Ш± Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Zambia"
-msgstr "ШІШ§Щ…ШЁЩЉШ§"
+msgid "connecting to Bugzilla wizard ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩ…Ш№Ш§Щ„Ш¬ Bugzilla ..."
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "South Africa"
-msgstr "Ш¬Щ†Щ€ШЁ ШЈЩЃШ±ЩЉЩ‚ЩЉШ§ "
+msgid "Mail Server"
+msgstr "Ш®Ш§ШЇЩ… ШЁШ±ЩЉШЇ"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Serbia"
-msgstr "ШµШ±ШЁЩЉШ§"
+msgid "Please click on a partition"
+msgstr "ЩЃШ¶Щ„Ш§ Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш©"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Mayotte"
-msgstr "Щ…Ш§ЩЉЩ€ШЄ"
+msgid "Linux"
+msgstr "Щ„ЩЉЩ†ЩѓШі"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Yemen"
-msgstr "Ш§Щ„ЩЉЩ…Щ†"
+msgid "Have a nice day!"
+msgstr "Щ†ШЄЩ…Щ†Щ‰ Щ„Щѓ ЩЉЩ€Щ…Ш§Щ‹ ШіШ№ЩЉШЇШ§Щ‹!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Samoa"
-msgstr "ШіШ§Щ…Щ€Ш§"
+msgid "across Network"
+msgstr "Ш№ШЁШ± Ш§Щ„ШґЩ‘ШЁЩѓШ©"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Wallis and Futuna"
-msgstr "Щ€Ш§Щ„ЩЉШі Щ€ ЩЃЩ€ШЄЩ€Щ†Ш§"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Vanuatu"
-msgstr "ЩЃШ§Щ†Ш§ШЄЩ€"
+msgid "Upgrade %s"
+msgstr "ШЄШ±Щ‚ЩЉШ© %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Vietnam"
-msgstr "ЩЃЩЉЩЉШЄЩ†Ш§Щ…"
+msgid "Select Printer Connection"
+msgstr "Ш§Ш®ШЄШ± Щ€ШµЩ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Ш§Щ„Ш¬ШІШ± Ш§Щ„Ш№Ш°Ш±Ш§ШЎ (Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©)"
+msgid "Scanning for TV channels in progress ..."
+msgstr "Ш¶ЩЉШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ ЩЃЩЉ ШЄЩ‚ШЇЩ… ..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Ш§Щ„Ш¬ШІШ± Ш§Щ„Ш№Ш°Ш±Ш§ШЎ (ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ§)"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
+"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃ Ш№ЩЉШ± FTP.\n"
+" ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШµШ­ЩЉШ­ Ш§Ш№ШЇШ§ШЇШ§ШЄ FTP."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Venezuela"
-msgstr "ЩЃЩЉЩ†ШІЩ€ЩЉЩ„Ш§"
+msgid "IP Range Start:"
+msgstr "IP Range Start:"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "ШіШ§Щ†ШЄ ЩЃЩЉЩ†ШіЩ†ШЄ Щ€ Ш§Щ„ШєШ±ЩЉЩ†Ш§ШЇЩЉЩ†"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Щ…Ш±Ш§Щ‚ШЁ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШЈШіШ§ШіЩЉ (ЩЉШіЩ…Щ‰ Ш№Ш§ШЇШ©Щ‹ ШЁЩЂ inetd) ЩЉШЁШЇШЈ\n"
+"Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ†ШЇ Ш§Щ„Ш­Ш§Ш¬Ш©. Ш§Щ†Щ‡ Щ…ШіШ¤Щ€Щ„ Ш№Щ† ШЁШЇШЎ\n"
+"Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Ш®ШЇЩ…Ш§ШЄ, ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ telnet, ftp, rsh, Щ€ rlogin. ШЄШ№Ш·ЩЉЩ„ inetd ШіЩЉШ№Ш·Щ„\n"
+"ЩѓЩ„ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш©."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Vatican"
-msgstr "Ш§Щ„ЩЃШ§ШЄЩЉЩѓШ§Щ†"
+msgid "the height of the progress bar"
+msgstr "Ш§Ш±ШЄЩЃШ§Ш№ ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "ШЈЩ€ШІШЁЩѓШіШЄШ§Щ†"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
+"\n"
+"- Ш§Ш­ЩЃШё Ш№ШЁШ± %s Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ: %s\n"
 
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Uruguay"
-msgstr "ШЈЩ€Ш±Щ€ШєЩ€Ш§ЩЉ"
+msgid "Argentina"
+msgstr "Ш§Щ„ШЈШ±Ш¬Щ†ШЄЩЉЩ† "
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Ш¬ШІШ± Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
 
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Uganda"
-msgstr "ШЈЩ€ШєЩ†ШЇШ§"
+msgid "Domain Name Server"
+msgstr "Ш®Ш§ШЇЩ… Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Ukraine"
-msgstr "ШЈЩ€ЩѓШ±Ш§Щ†ЩЉШ§"
+msgid "Security Level:"
+msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†:"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Tanzania"
-msgstr "ШЄЩ†ШІШ§Щ†ЩЉШ§"
+msgid "Mount points must begin with a leading /"
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ШЄШЁШЇШЈ Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© /"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Taiwan"
-msgstr "ШЄШ§ЩЉЩ€Ш§Щ†"
+msgid "Postfix Mail Server"
+msgstr "Ш®Ш§ШЇЩ… Ш§Щ„ШЁШ±ЩЉШЇ Postfix"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Tuvalu"
-msgstr "ШЄЩ€ЩЃШ§Щ„Щ€"
+msgid "Quit without saving"
+msgstr "Ш§Щ„Ш®Ш±Щ€Ш¬ ШЁШЇЩ€Щ† Ш§Щ„Ш­ЩЃШё"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr "ШЄШ±ЩЉЩ†ЩЉШ§ШЇ Щ€ ШЄЩ€ШЁШ§Ш¬Щ€"
+msgid "Yemen"
+msgstr "Ш§Щ„ЩЉЩ…Щ†"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Turkey"
-msgstr "ШЄШ±ЩѓЩЉШ§"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…Щ†ШЄШ¬ Щ…ШЄЩ€ЩЃШ± Ш№Щ„Щ‰ Щ…Щ€Щ‚Ш№ MandrakeStore"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tonga"
-msgstr "ШЄЩ€Щ†Ш¬Щ€"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш­Ш¬Щ… Ш§Щ„ШЈЩ‚ШµЩ‰\n"
+" Ш§Щ„Щ…ШіЩ…Щ€Ш­ ШЁЩ‡ Щ„ЩЂDrakbackup"
 
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr "ШЄЩ€Щ†Ші"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> There are many things to choose from (%s).\n"
 
-#: ../../lang.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Turkmenistan"
-msgstr "ШЄШ±ЩѓЩ…Ш§Щ†ШіШЄШ§Щ†"
+msgid "Hard drive detection"
+msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ©"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "East Timor"
-msgstr "ШЄЩЉЩ…Щ€Ш± Ш§Щ„ШґШ±Щ‚ЩЉШ©"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Щ„Щ… ШЄШ®ШЄШ± ШЈЩЉ Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш§Щ„Ш­ШІЩ….\n"
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…ШµШєШ± Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇЩ‡:"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Tokelau"
-msgstr "ШЄЩ€ЩѓЩ„Ш§Щ€"
+msgid "Please enter the WebDAV server URL"
+msgstr "Ш±Ш¬Ш§ШЎ ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† Ш®Ш§ШЇЩ… WebDav"
 
 #: ../../lang.pm:1
 #, c-format
 msgid "Tajikistan"
 msgstr "Ш·Ш§Ш¬ЩѓШіШЄШ§Щ†"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr "ШЄШ§ЩЉЩ„Ш§Щ†ШЇ"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr "ШЄЩ€Ш¬Щ€"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "French Southern Territories"
-msgstr "Щ…Щ†Ш§Ш·Щ‚ Ш¬Щ†Щ€ШЁ ЩЃШ±Щ†ШіШ§"
-
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Chad"
-msgstr "ШЄШґШ§ШЇ"
+msgid "Accept"
+msgstr "Ш§Щ‚ШЁЩ„"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Ш¬ШІШ± Ш§Щ„ШЄШ±Щѓ Щ€ Ш§Щ„ЩѓШ§ЩЉЩѓЩ€Ші"
+msgid "Description"
+msgstr "Ш§Щ„Щ€ШµЩЃ"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Swaziland"
-msgstr "ШіЩ€Ш§ШІЩЉЩ„Ш§Щ†ШЇ"
+msgid "Error opening %s for writing: %s"
+msgstr " ЩЃШЄШ­Ш© Ш§Щ„Ш®Ш·ШҐ  %s Щ„Щ„ЩѓШЄШ§ШЁШ© :%s"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Syria"
-msgstr "ШіЩ€Ш±ЩЉШ©"
+msgid "Mouse type: %s\n"
+msgstr "Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш©: %s\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "El Salvador"
-msgstr "Ш§Щ„ШіЩ„ЩЃШ§ШЇЩ€Ш±"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ…Ш№ XFree %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr "ШіШ§Щ€ ШЄЩ€Щ…ЩЉ Щ€ Ш§Щ„ШЁШ±ЩЉЩ†ШіЩЉШЁ"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…ШіШ§Ш­Ш© Щ€ШіЩЉШ· CD/DVD (ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ)"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Suriname"
-msgstr "ШіЩ€Ш±ЩЉЩ†Ш§Щ…"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Somalia"
-msgstr "Ш§Щ„ШµЩ€Щ…Ш§Щ„"
+msgid "Expert Area"
+msgstr "Щ…Щ†Ш·Щ‚Ш© Ш§Щ„Ш®ШЁШ±Ш§ШЎ"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Senegal"
-msgstr "Ш§Щ„ШіЩ†ШєШ§Щ„"
+msgid "Choose a monitor"
+msgstr "ШҐШ®ШЄШ± ШґШ§ШґШ©"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "San Marino"
-msgstr "ШіШ§Щ† Щ…Ш§Ш±ЩЉЩ†Щ€"
+msgid "Empty label not allowed"
+msgstr "ШєЩЉШ± Щ…ШіЩ…Щ€Ш­ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш§ШЄ Ш§Щ„ЩЃШ§Ш±ШєШ©"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Sierra Leone"
-msgstr "ШіЩЉШ±Ш§Щ„ЩЉЩ€Щ†"
+msgid "Maltese (UK)"
+msgstr "Ш§Щ„Щ…Ш§Щ„Ш·ЩЉШ© (ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ§)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Slovakia"
-msgstr "ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ§"
+msgid "I can't add any more partition"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш¶Ш§ЩЃШ© ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЈШ®Ш±Щ‰"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Ш¬ШІШ± ШіЩЃШ§Щ„ШЁШ§Ш±ШЇ Щ€ Ш¬Ш§Щ† Щ…Ш§ЩЉЩ†"
+msgid "Size in MB: "
+msgstr "Ш§Щ„Ш­Ш¬Щ… ШЁШ§Щ„ЩЉШєШ§ШЁШ§ЩЉШЄ: "
 
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Slovenia"
-msgstr "ШіЩ„Щ€ЩЃЩЉЩ†ЩЉШ§"
+msgid "Remote printer"
+msgstr "Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Saint Helena"
-msgstr "ШіШ§Щ†ШЄ Щ‡ЩЉЩ„Ш§Щ†Ш©"
+msgid "Please choose a language to use."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ„ШєШ© Ш§Щ„Ш§ШіШЄШ®ШЇШ§Щ…."
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Singapore"
-msgstr "ШіЩ†ШєШ§ЩЃЩ€Ш±Ш©"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ШЄШ­Ш°ЩЉШ±: ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ ШіШ§ШЁЩ‚Ш§Щ‹ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"ШЁЩѓЩ„ ШЁШіШ§Ш·Ш© Ш§Щ‚ШЁЩ„ ШЈЩ† ШЄЩЏШЁЩ‚ЩЉ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш№ШЇЩ‘.\n"
+"ШЄШ№ШЇЩЉЩ„ Ш§Щ„Ш­Щ‚Щ€Щ„ ШЈШЇЩ†Ш§Щ‡ ШіЩЉШєЩЉЩ‘Ш± Щ‡Ш°Щ‡ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©."
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sudan"
-msgstr "Ш§Щ„ШіЩ€ШЇШ§Щ†"
+msgid "I can set up your computer to automatically log on one user."
+msgstr "ЩЉЩ…ЩѓЩ† Ш§Ш№ШЇШ§ШЇ Ш¬Щ‡Ш§ШІЩѓ Щ„ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ ШўЩ„ЩЉШ§Щ‹ Щ„Щ…ШіШЄШ®ШЇЩ… Щ…Ш№ЩЉЩ†."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Seychelles"
-msgstr "Ш¬ШІШ± ШіЩЉШґЩ„"
+msgid "Floppy format"
+msgstr "Щ†ШіЩ‚ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Solomon Islands"
-msgstr "Ш¬ШІШ± ШіЩ„ЩЉЩ…Ш§Щ†"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr "Ш§Щ„ШіШ№Щ€ШЇЩЉШ©"
+msgid "Generic Printers"
+msgstr "Ш·Ш§ШЁШ№Ш§ШЄ Ш№Ш§ШЇЩЉШ© (Generic)"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr "Ш±Щ€Ш§Щ†ШЇШ§"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄШ°Щ‡ШЁ Ш§Щ„ЩЉЩ‡Ш§ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… "
+"Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Russia"
-msgstr "Ш±Щ€ШіЩЉШ§"
+msgid "The scanners on this machine are available to other computers"
+msgstr "Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Romania"
-msgstr "Ш±Щ€Щ…Ш§Щ†ЩЉШ§"
+msgid "First sector of the root partition"
+msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№ Ш§Щ„ШЈЩ€Щ„ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Reunion"
-msgstr "Ш±ЩЉЩ€Щ†ЩЉЩ€Щ†"
+msgid "Alternative drivers"
+msgstr "Щ…ШґШєЩ„Ш§ШЄ ШЁШЇЩЉЩ„Ш©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Qatar"
-msgstr "Щ‚Ш·Ш±"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
+"\n"
+"ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Ш№Щ„Щ‰ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Palau"
-msgstr "ШЁШ§Щ„Ш§Щ€"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Paraguay"
-msgstr "Ш§Щ„ШЁШ§Ш±Ш¬Щ€Ш§ЩЉ"
+msgid "Cape Verde"
+msgstr "ЩѓЩЉШЁ ЩЃЩЉШ±ШЇЩЉ"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Portugal"
-msgstr "Ш§Щ„ШЁШ±ШЄШєШ§Щ„"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr "Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Щ„ШЇЩЉЩ‡ Cyrix 6x86 Coma bug"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Palestine"
-msgstr "ЩЃЩ„ШіШ·ЩЉЩ†"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr "Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ pentium Ш§Щ„Щ‚ШЇЩЉЩ…Ш© ЩѓШ§Щ†ШЄ ШЄШЄЩ€Щ‚ЩЃ Ш№Щ† Ш§Щ„Ш№Щ…Щ„ Ш№Щ†ШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ЩѓЩ€ШЇ F00F"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "ШЁЩ€Ш±ШЄЩ€Ш±ЩЉЩѓЩ€"
+msgid "Guam"
+msgstr "ШєЩ€Ш§Щ…"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Pitcairn"
-msgstr "ШЁЩЉШЄЩѓШ§ЩЉШ±Щ†"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "ШіШ§Щ†ШЄ ШЁЩЉЩЉШ± Щ€ Щ…ЩЉЩѓЩЉЩ„Щ€Щ†"
+msgid "/Options/Test"
+msgstr "/Ш®ЩЉШ§Ш±Ш§ШЄ/Ш§Ш®ШЄШЁШ§Ш±"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Poland"
-msgstr "ШЁЩ€Щ„Щ†ШЇШ§"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"ЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ ШЁШ­Ш°Ш±. ЩЃЩ‡Щ€ ЩЉШ¬Ш№Щ„ Щ†ШёШ§Щ…Щѓ ШЈШіЩ‡Щ„ ЩЃЩЉ Ш§Щ„ШҐШіШЄШ®ШЇШ§Щ…,\n"
+"Щ„ЩѓЩ† ЩЉЩ…Щ€Щ† Ш­ШіШ§ШіШ§Щ‹ Ш¬ШЇШ§Щ‹. Щ„Ш°Ш§ Щ„Ш§ ЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄШµЩ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЈШ®Ш±Щ‰\n"
+"ШЈЩ€ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ. Щ„Ш§ ЩЉЩ€Ш¬ШЇ ШЇШ®Щ€Щ„ ШЁЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±."
 
-#: ../../lang.pm:1
+# y, c-format
+#: ../../fs.pm:1
 #, c-format
-msgid "Pakistan"
-msgstr "ШЁШ§ЩѓШіШЄШ§Щ†"
+msgid "Mounting partition %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Ш§Щ„ЩЃЩЉЩ„ЩЉШЁЩЉЩ†"
+msgid "User name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Papua New Guinea"
-msgstr "ШЁШ§ШЁЩ€Ш§ ШєЩЉЩ†ЩЉШ§ Ш§Щ„Ш¬ШЇЩЉШЇШ©"
+msgid "New configuration (isdn-light)"
+msgstr "ШҐШ№ШЇШ§ШЇ Ш¬ШЇЩЉШЇ (isdn-light)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "French Polynesia"
-msgstr "ШЁЩ€Щ„ЩЉЩ†ЩЉШіЩЉШ§ Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
+msgid "Userdrake"
+msgstr "Userdrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Peru"
-msgstr "ШЁЩЉШ±Щ€"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ…Щ† ШЈШ¬Щ„ Linux4Win"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Panama"
-msgstr "ШЁЩ†Щ…Ш§"
+msgid "Backup system"
+msgstr "Щ†ШёШ§Щ… Ш§Щ„Щ…ШіШ§Ш№ШЇ"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Oman"
-msgstr "Ш№Щ…Ш§Щ†"
+msgid "Test pages"
+msgstr "ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New Zealand"
-msgstr "Щ†ЩЉЩ€ШІЩЉЩ„Щ†ШЇШ§"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
+"Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… Ш§ШіШЄШ±Ш¬Ш§Ш№Щ‡Ш§:\n"
+"\n"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Niue"
-msgstr "Щ†ЩЉЩ€ЩЉ"
+msgid "Checking %s"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Nauru"
-msgstr "Щ†Ш§Щ€Ш±Щ€"
+msgid "TCP/Socket Printer Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© TCP/Socket"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Nepal"
-msgstr "Щ†ЩЉШЁШ§Щ„"
+msgid "Card mem (DMA)"
+msgstr "Card mem (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Щ†ЩЉЩѓШ§Ш±Ш§ШєЩ€Ш§"
+msgid "France"
+msgstr "ЩЃШ±Щ†ШіШ§"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Nigeria"
-msgstr "Щ†ЩЉШ¬ЩЉШ±ЩЉШ§"
+msgid "browse"
+msgstr "Ш§ШіШЄШ№Ш±Ш¶"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Norfolk Island"
-msgstr "Ш¬ШІЩЉШ±Ш© Щ†Щ€Ш±ЩЃЩ€Щ„Щѓ"
+msgid "Checking installed software..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш«ШЁЩ‘ШЄШ©..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Niger"
-msgstr "Ш§Щ„Щ†ЩЉШ¬Ш±"
+msgid "Remote printer name missing!"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ© Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New Caledonia"
-msgstr "Щ†ЩЉЩ€ЩѓШ§Щ„ЩЉШЇЩ€Щ†ЩЉШ§"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©Шџ\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Namibia"
-msgstr "Щ†Ш§Щ…ЩЉШЁЩЉШ§"
+msgid "Turkey"
+msgstr "ШЄШ±ЩѓЩЉШ§"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr "Щ…Щ€ШІЩ…ШЁЩЉЩ‚"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch usb"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Malaysia"
-msgstr "Щ…Ш§Щ„ЩЉШІЩЉШ§"
+msgid "Number of buttons"
+msgstr "Ш№ШЇШЇ Ш§Щ„ШЈШІШ±Ш§Ш±"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Mexico"
-msgstr "Ш§Щ„Щ…ЩѓШіЩЉЩѓ"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Ш§ЩЃЩЉШЄЩ†Ш§Щ…ЩЉШ© \"ШµЩЃ Ш±Щ‚Щ…ЩЉ\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Malawi"
-msgstr "Щ…Ш§Щ„Ш§Щ€ЩЉ"
+msgid "Module"
+msgstr "Щ€Ш­ШЇШ©"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Maldives"
-msgstr "Ш¬ШІШ± Ш§Щ„Щ…Ш§Щ„ШЇЩЉЩЃ"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш°Щ„Щѓ, ЩЃШҐЩ† Ш§Щ„ШµЩЃЩ€ЩЃ Ш§Щ„ШЄЩЉ Щ„Щ… ЩЉШЄЩ… Ш№Щ…Щ„Щ‡Ш§ ШЁЩ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш­ ШЈЩ€ \"foomatic-"
+"configure\" Щ„Ш§ ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„Щ‡Ш§."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mauritius"
-msgstr "Щ…Щ€Ш±ЩЉШґЩЉЩ€Ші"
+msgid "Hardware"
+msgstr "Ш§Щ„Ш№ШЄШ§ШЇ"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Malta"
-msgstr "Щ…Ш§Щ„Ш·Ш©"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Ctrl Щ€ Alt ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Montserrat"
-msgstr "Щ…Щ€Щ†ШЄШіЩЉШ±Ш§ШЄ"
+msgid "United States"
+msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mauritania"
-msgstr "Щ…Щ€Ш±ЩЉШЄШ§Щ†ЩЉШ§"
+msgid "Default OS?"
+msgstr "Щ†ШёШ§Щ… Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШџ"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Martinique"
-msgstr "Щ…Ш§Ш±ШЄЩЉЩ†ЩЉЩѓ"
+msgid "Swiss (German layout)"
+msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ© (ШЄШµЩ…ЩЉЩ… ШЈЩ„Щ…Ш§Щ†ЩЉ)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr "Ш¬ШІШ± Щ…Ш§Ш±ЩЉШ§Щ†Ш§ Ш§Щ„ШґЩ…Ш§Щ„ЩЉШ©"
+msgid "Configure all heads independently"
+msgstr "Ш§Ш№ШЇШ§ШЇ ЩѓЩ„ Ш§Щ„Ш±Ш¤Щ€Ші ШЁШґЩѓЩ„ Щ…ШіШЄЩ‚Щ„"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr "Щ…Щ†ШєЩ€Щ„ЩЉШ§"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇЩ‡Ш§. Ш§Ш№ШЇШ§ШЇ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШіЩЉШ№Щ…Щ„ ШўЩ„ЩЉШ§Щ‹. Ш§Щ† Щ„Щ… ЩЉШЄЩ… "
+"Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­ ШЈЩ€ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„ ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ© ШґШєЩ„ \"ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©\"."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Myanmar"
-msgstr "Щ…ЩЉШ§Щ†Щ…Ш§Ш±"
+msgid "NTP Server"
+msgstr "Ш®Ш§ШЇЩ… NTP"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Mali"
-msgstr "Щ…Ш§Щ„ЩЉ"
+msgid "Load/Save on floppy"
+msgstr "Ш­Щ…Щ‘Щ„/Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Macedonia"
-msgstr "Щ…Щ‚ШЇЩ€Щ†ЩЉШ§"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„ШіЩ…Ш© Щ„ЩЉШі Щ„Щ‡Ш§ bootsplash ЩЃЩЉ %s !"
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "Ш¬ШІШ± Щ…Ш§Ш±ШґШ§Щ„"
+msgid "nice"
+msgstr "ШёШ±ЩЉЩЃ"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Madagascar"
-msgstr "Щ…ШЇШєШґЩ‚Ш±"
+msgid "Leaving in %d seconds"
+msgstr "ШіШЄШЄЩ… Ш§Щ„Щ…ШєШ§ШЇШ±Ш© ЩЃЩЉ %d Ш«Щ€Ш§Щ†"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Moldova"
-msgstr "Щ…Щ€Щ„ШЇЩ€ЩЃШ§"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШЄШіЩ„ШіЩ„ЩЉ Ш§Щ„Щ…Ш±ШЄШЁШ· ШЁЩ‡ Ш§Щ„Щ…Щ€ШЇЩ… Щ„ШЇЩЉЩѓ."
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Monaco"
-msgstr "Щ…Щ€Щ†Ш§ЩѓЩ€"
+msgid "Country"
+msgstr "Ш§Щ„ШЁЩ„ШЇ"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Morocco"
-msgstr "Ш§Щ„Щ…ШєШ±ШЁ"
+msgid "Property"
+msgstr "Ш§Щ„Ш®Ш§ШµЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Libya"
-msgstr "Щ„ЩЉШЁЩЉШ§"
+msgid "Ghostscript"
+msgstr "Ghostscript"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Latvia"
-msgstr "Щ„Ш§ШЄЩЃЩЉШ§"
+msgid "LAN Configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ LAN"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr "Щ„Щ€ЩѓШіЩ…ШЁЩ€Ш±Шє"
+msgid "Ghana"
+msgstr "ШєШ§Щ†Ш§"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuania"
-msgstr "Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ§"
+msgid "Path or Module required"
+msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШіШ§Ш± ШЈЩ€ Щ€Ш­ШЇШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Lesotho"
-msgstr "Щ„ЩЉШіЩ€ШЄЩ€"
+msgid "Advanced Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Щ…ШЄЩ‚ШЇЩ…Ш©"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Liberia"
-msgstr "Щ„ЩЉШЁШ±ЩЉШ§"
+msgid "Coma bug"
+msgstr "Coma bug"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "ШіШ±ЩЉЩ„Ш§Щ†ЩѓШ§"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Liechtenstein"
-msgstr "Щ„ЩЉШґШЄЩ†ШґШЄШ§ЩЉЩ†"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
+"ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ…\n"
+"\n"
+"   ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЉЩ‚Щ€Щ… ШЁШ§ЩѓШЄШґШ§ЩЃ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ\n"
+"ШЁШґЩѓЩ„ ШўЩ„ЩЉ. Ш§Щ† Щ„Щ… ЩЉШ­ШµЩ„ Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩЉ Щ„ШЇЩЉЩѓ ШЁШ§Щ„ЩЃШ№Щ„\n"
+"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©.\n"
+"\n"
+"   ЩЃЩЉ Ш­Ш§Щ„ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Ш®Ш§ШЇЩ…Ш§ШЄ Ш±ШіЩ€Щ…ЩЉШ© Щ…Ш®ШЄЩ„ЩЃШ© Щ„ШЁШ·Ш§Щ‚ШЄЩѓ, Щ…Ш№ ШЈЩ€ ШЁШЇЩ€Щ†\n"
+"ШЄШіШ±ЩЉШ№ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ, ЩЉЩ…ЩѓЩ†Щѓ ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Ш°ЩЉ\n"
+"ЩЉЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ ШЈЩѓШ«Ш±."
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr "ШіШ§Щ†ШЄ Щ„Щ€ШіЩЉШ§"
+msgid "There was an error installing packages:"
+msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ЩЃЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lebanon"
-msgstr "Щ„ШЁЩ†Ш§Щ†"
+msgid "Lexmark inkjet configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ Lexmark Inkjet"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Laos"
-msgstr "Щ„Ш§Щ€Ші"
+msgid "Undo"
+msgstr "ШЄШ±Ш§Ш¬Ш№"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "ЩѓШ§ШІШ§Ш®ШіШЄШ§Щ†"
+msgid "Save partition table"
+msgstr "Ш­ЩЃШё Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cayman Islands"
-msgstr "Ш¬ШІШ± ЩѓШ§ЩЉЩ…Ш§Щ†"
+msgid "Finnish"
+msgstr "Ш§Щ„ЩЃЩ†Щ„Щ†ШЇЩЉШ©"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Kuwait"
-msgstr "Ш§Щ„ЩѓЩ€ЩЉШЄ"
+msgid "Macedonia"
+msgstr "Щ…Щ‚ШЇЩ€Щ†ЩЉШ§"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Korea"
-msgstr "ЩѓЩ€Ш±ЩЉШ§"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ… ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш© \"fileshare\".\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШіШЄШ®ШЇЩ… userdrake Щ„ШҐШ¶Ш§ЩЃШ© Щ…ШіШЄШ®ШЇЩ… ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Korea (North)"
-msgstr "ЩѓЩ€Ш±ЩЉШ§ Ш§Щ„ШґЩ…Ш§Щ„ЩЉШ©"
+msgid "Slovenian"
+msgstr "Ш§Щ„ШіЩ„Щ€ЩЃЩЉЩ†ЩЉШ©"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "ШіШ§Щ†ШЄ ЩѓЩЉШЄШі Щ€ Щ†ЩЉЩЃЩЉШі"
+msgid "Libya"
+msgstr "Щ„ЩЉШЁЩЉШ§"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Comoros"
-msgstr "Ш¬ШІШ± Ш§Щ„Щ‚Щ…Ш±"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ†ШµЩ€Шµ Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ© Щ€ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Щ€ ШЁШЇШЎ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Kiribati"
-msgstr "ЩѓЩЉШ±ЩЉШЁШ§ШЄЩЉ"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+"\n"
+"- Ш§Щ†ШіШ® Ш§Щ„Щ‰ Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr "ЩѓЩ…ШЁЩ€ШЇЩЉШ§"
+msgid "Table"
+msgstr "Ш§Щ„Ш¬ШЇЩ€Щ„"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "Щ‚ЩЉШ±ШєЩЉШІШіШЄШ§Щ†"
+msgid "I don't know how to format %s in type %s"
+msgstr "Щ„Ш§ ШЈШ№Ш±ЩЃ ЩѓЩЉЩЃ ШЈШ¬Щ‡ШІ %s ЩЃЩЉ Ш§Щ„Щ†Щ€Ш№ %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Kenya"
-msgstr "ЩѓЩЉЩ†ЩЉШ§"
+msgid "Model"
+msgstr "Ш§Щ„Ш·Ш±Ш§ШІ"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Japan"
-msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ†"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Jordan"
-msgstr "Ш§Щ„ШЈШ±ШЇЩ†"
+msgid "Stop Server"
+msgstr "ШЈЩ€Щ‚ЩЃ Ш§Щ„Ш®Ш§ШЇЩ…"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Jamaica"
-msgstr "Ш¬Ш§Щ…Ш§ЩЉЩѓШ§"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+"\n"
+"Ш§Ш®ШЄШ± ШіЩ…Ш©\n"
+"Lilo Щ€ bootsplash,\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Щ…\n"
+"ШЁШґЩѓЩ„ Щ…Щ†ЩЃШµЩ„"
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Iceland"
-msgstr "ШўЩЉШіЩ„Щ†ШЇШ§"
+msgid "Modem"
+msgstr "Ш§Щ„Щ…Щ€ШЇЩ…"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Iran"
-msgstr "Ш§ЩЉШ±Ш§Щ†"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Iraq"
-msgstr "Ш§Щ„Ш№Ш±Ш§Щ‚"
+msgid "Tuvalu"
+msgstr "ШЄЩ€ЩЃШ§Щ„Щ€"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Щ…Щ†Ш·Щ‚Ш© Ш¬ШІШ± Ш§Щ„Щ…Ш­ЩЉШ· Ш§Щ„Щ‡Ш§ШЇЩЉ Ш§Щ„ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ©"
+msgid "Use auto detection"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "India"
-msgstr "Ш§Щ„Щ‡Щ†ШЇ"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"ЩЉЩ‚Щ€Щ… GPM ШЁШҐШ¶Ш§ЩЃШ© ШЇШ№Щ… Ш§Щ„ЩЃШЈШ±Ш© Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Щ„ЩЉЩ†ЩѓШі ЩЃЩЉ Ш§Щ„Щ€Ш¶Ш№ Ш§Щ„Щ†ШµЩЉ Щ…Ш«Щ„\n"
+"Midnight Commander. Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш°Щ„Щѓ ЩЃШҐЩ†Щ‡ ЩЉШіЩ…Ш­ ШЁШ№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Щ‚Шµ Щ€ Ш§Щ„Щ„ШµЩ‚ ЩЃЩЉ ШіШ·Ш± "
+"Ш§Щ„ШЈЩ€Ш§Щ…Ш±,\n"
+"ЩѓЩ…Ш§ ЩЉШЄШ¶Щ…Щ† ШЇШ№Щ… Ш§Щ„Щ‚Щ€Ш§Ш¦Щ… Ш§Щ„Щ…Ш®ШЄШµШ±Ш© ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Israel"
-msgstr "Ш§ШіШ±Ш§Ш¦ЩЉЩ„"
+msgid "Started on boot"
+msgstr "ЩЉШЄЩ… ШЁШЇШЎЩ‡ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Ireland"
-msgstr "ШЈЩЉШ±Щ„Щ†ШЇШ§"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
+"Ш§Щ„ШЄШ­Щ‚ ШЁЩЃШ±ЩЉЩ‚ Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ ЩЃЩЉ MandrakeSoft Щ€ Щ…Ш¬ШЄЩ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ„Щ…ШґШ§Ш±ЩѓШ© "
+"Щ…Ш№Щ„Щ€Щ…Ш§ШЄЩѓ Щ€ Щ…ШіШ§Ш№ШЇШ© Ш§Щ„ШўШ®Ш±ЩЉЩ† ШЁШЈЩ† ШЄШµШЁШ­ Ш®ШЁЩЉШ±Ш§Щ‹ Щ…Ш№ШЄЩ…ЩЋШЇШ§Щ‹ ЩЃЩЉ Щ…Щ€Щ‚Ш№Щ†Ш§ Щ„Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Ш№Щ„Щ‰ "
+"Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ:"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Indonesia"
-msgstr "Ш§Щ†ШЇЩ€Щ†ЩЉШіЩЉШ§"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
+"ЩЉЩ…ЩѓЩ† ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ© Щ„ШЄШ®ШµЩЉШµ\n"
+"ШЈЩ…Щ† Ш§Щ„Щ†ШёШ§Щ…. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„ШґШ±Ш­, Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш№ШЇШ©.\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hungary"
-msgstr "Ш§Щ„Щ…Ш¬Ш±"
+msgid "Automatically find available printers on remote machines"
+msgstr "Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ШўЩ„ЩЉШ§Щ‹"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Haiti"
-msgstr "Щ‡Ш§ЩЉШЄЩЉ"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
+"\n"
+"- Ш§Ш­ЩЃШё Ш§Щ„Щ‰ Ш§Щ„ШґШ±ЩЉШ· Ш№Щ„Щ‰ Ш§Щ„Ш¬Щ‡Ш§ШІ: %s"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Croatia"
-msgstr "ЩѓШ±Щ€Ш§ШЄЩЉШ§"
+msgid "East Timor"
+msgstr "ШЄЩЉЩ…Щ€Ш± Ш§Щ„ШґШ±Щ‚ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Honduras"
-msgstr "Щ‡Щ†ШЇЩ€Ш±Ш§Ші"
+msgid "Del profile..."
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШґЩѓЩЉЩ„..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Ш¬ШІШ± Щ‡ЩЉШ±ШЇ Щ€ Щ…Ш§ЩѓШЇЩ€Щ†Ш§Щ„ШЇ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hong Kong"
-msgstr "Щ‡Щ€Щ†Ш¬ ЩѓЩ€Щ†Ш¬"
+msgid "Installing Foomatic..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Foomatic..."
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "China"
-msgstr "Ш§Щ„ШµЩЉЩ†"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "ЩЉШ±Ш¬Щ‰ ШЄШіШ¬ЩЉЩ„ Ш§Щ„Ш®Ш±Щ€Ш¬ Ш«Щ… Ш§ШіШЄШ®ШЇЩ… Ctrl-Alt-BackSpace"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "ШєЩ€ЩЉШ§Щ†Ш§"
+msgid "detected"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃЩ‡"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "ШєЩЉЩ†ЩЉШ§-ШЁЩЉШіШ§Щ€"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "ЩЉШ¬ШЁ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©. Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„Щ‡Ш§ Шџ"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Guam"
-msgstr "ШєЩ€Ш§Щ…"
+msgid "Package: "
+msgstr "Ш§Щ„Ш¬ШІЩ…Ш©: "
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Guatemala"
-msgstr "ШєЩ€Ш§ШЄЩЉЩ…Ш§Щ„Ш§"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "ШЄШ№Ш°Ш±ШЄ ЩѓШЄШ§ШЁШ© /etc/sysconfig/bootsplash."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Ш¬Щ€Ш¬ЩЉШ§ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉШ© Щ€ Ш¬ШІШ± ШіШ§Щ†ШЇЩ€ЩЉШЄШґ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉШ©"
+msgid "SECURITY WARNING!"
+msgstr "ШЄШ­Ш°ЩЉШ± ШЈЩ…Щ†ЩЉ!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr "ШєЩЉЩ†ЩЉШ§ Ш§Щ„ШҐШіШЄЩ€Ш§Ш¦ЩЉШ©"
+msgid "StarOffice"
+msgstr "StarOffice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Guadeloupe"
-msgstr "ШєЩ€Ш§ШЇЩЉЩ„Щ€ШЁ"
+msgid "No, I don't want autologin"
+msgstr "Щ„Ш§, Щ„Ш§ ШЈШ±ЩЉШЇ ШЇШ®Щ€Щ„Ш§ ШЈЩ„ЩЉШ§"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Guinea"
-msgstr "ШєЩЉЩ†ЩЉШ§"
+msgid "Windows Migration tool"
+msgstr "ШЈШЇШ§Ш© Ш§Щ„ШҐЩ†ШЄЩ‚Ш§Щ„ Щ…Щ† Windows"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Gambia"
-msgstr "ШєШ§Щ…ШЁЩЉШ§"
+msgid "All languages"
+msgstr "ЩѓЩ„ Ш§Щ„Щ„ШєШ§ШЄ"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Greenland"
-msgstr "ШєШ±ЩЉЩ†Щ„Ш§Щ†ШЇ"
+msgid "Removing %s"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© %s"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Gibraltar"
-msgstr "Ш¬ШЁЩ„ Ш·Ш§Ш±Щ‚"
+msgid "Testing your connection..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„Щ€ШµЩ„Ш©..."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Ghana"
-msgstr "ШєШ§Щ†Ш§"
+msgid "Cache size"
+msgstr "Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш§Щ„Щ…Ш®ШЁШ¦ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "French Guiana"
-msgstr "ШєЩ€ЩЉШ§Щ†Ш§ Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr "ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± Щ…Щ…ЩѓЩ‘Щ†Ш© Ш§Щ„ШўЩ†, Щ„ЩѓЩ† Ш§Щ„Ш§ШіШЄШ®ШЇШ§Щ… ЩѓШ­Ш§ШіШЁ ЩЃЩЉ ШґШЁЩѓШ© ЩЉШІШ§Щ„ ШєЩЉШ± Щ…ЩЃШ¶Щ‘Щ„."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Georgia"
-msgstr "Ш¬Щ€Ш±Ш¬ЩЉШ§"
+msgid "Start sector: "
+msgstr "Щ‚Ш·Ш§Ш№ Ш§Щ„ШЁШЇШ§ЩЉШ©: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Grenada"
-msgstr "Ш№Ш±ЩЉЩ†Ш§ШЇШ§"
+msgid "Congo (Brazzaville)"
+msgstr "Ш§Щ„ЩѓЩ€Щ†ШєЩ€ ШЁШ±Ш§ШІШ§ЩЃЩЉЩ„"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "United Kingdom"
-msgstr "Ш§Щ„Щ…Щ…Щ„ЩѓШ© Ш§Щ„Щ…ШЄШ­ШЇШ©"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Ш§Щ„Ш­ШІЩ…Ш© %s ЩЉШ¬ШЁ ШЈЩ† ШЄЩЏШ«ШЁЩ‘ШЄ. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§Шџ"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Gabon"
-msgstr "Ш§Щ„ШєШ§ШЁЩ€Щ†"
+msgid "Seychelles"
+msgstr "Ш¬ШІШ± ШіЩЉШґЩ„"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Ш¬ШІШ± Ш§Щ„ЩЃЩЉШ±Щ€"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
+"Щ‚Ш§Щ… Printerdrake ШЁЩ…Щ‚Ш§Ш±Щ†Ш© Ш§ШіЩ… Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„Щ†Ш§ШЄШ¬ Ш№Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…Ш№ "
+"Ш§Щ„Ш·Ш±Ш§ШІШ§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЈЩЃШ¶Щ„ ШЄЩ€Ш§ЩЃЩ‚. Щ‡Ш°Ш§ "
+"Ш§Щ„ШҐШ®ШЄЩЉШ§Ш± Щ‚ШЇ ЩЉЩѓЩ€Щ† Ш®Ш§Ш·Ш¦Ш§Щ‹, Ш®ШµЩ€ШµШ§Щ‹ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇШ© Ш§Ш·Щ„Ш§Щ‚Ш§Щ‹ ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© "
+"ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ. Щ„Ш°Ш§ ШЄШЈЩѓШЇ Ш§Ш° ЩѓШ§Щ† Ш§Ш®ШЄЩЉШ§Ш±Щѓ ШµШ­ЩЉШ­Ш§Щ‹ Щ€ Ш§Щ†Щ‚Ш± \"Ш§Щ„Ш·Ш±Ш§ШІ ШµШ­ЩЉШ­\", ШЈЩ…Ш§ "
+"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Ш§Щ„Ш·Ш§ШІ ШµШ­ЩЉШ­Ш§Щ‹, Ш§Щ†Щ‚Ш± \"Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±Ш§ШІ ЩЉШЇЩ€ЩЉШ§Щ‹\" ЩѓЩЉ ЩЉШЄШіЩ†Щ‰ Щ„Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш±Ш§ШІ "
+"Ш·Ш§ШЁШ№ШЄЩѓ ЩЉШЇЩ€ЩЉШ§Щ‹ Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©.\n"
+"\n"
+"Щ„Ш·Ш§ШЁШ№ШЄЩѓ Щ€Ш¬ШЇ Printerdrake:\n"
+"\n"
+"%s"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Micronesia"
-msgstr "Щ…ЩЉЩѓШ±Щ€Щ†ЩЉШІЩЉШ§"
+msgid "Bad password on %s"
+msgstr "ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± ШіЩЉШ¦Ш© Ш№Щ„Щ‰ %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Ш¬ШІШ± ЩЃЩ€ЩѓЩ„Ш§Щ†ШЇ"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"ШЄЩ€Ш¬ШЇ Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ© Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Fiji"
-msgstr "ЩЃЩЉШ¬ЩЉ"
+msgid "Zambia"
+msgstr "ШІШ§Щ…ШЁЩЉШ§"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Finland"
-msgstr "ЩЃЩ†Щ„Щ†ШЇШ§"
+msgid "Security Administrator (login or email)"
+msgstr "Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ… (Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„ ШЈЩ€ Ш§Щ„ШЁШ±ШЇЩЉ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Ш§Ш«ЩЉЩ€ШЁЩЉШ§"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr "ШўШіЩЃЩ€Щ†, Щ†Ш­Щ† Щ†ШЇШ№Щ… Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© 2.4"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Spain"
-msgstr "ШЈШіШЁШ§Щ†ЩЉШ§"
+msgid "Romanian (qwerty)"
+msgstr "Ш§Щ„Ш±Щ€Щ…Ш§Щ†ЩЉШ© (qwertz)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Eritrea"
-msgstr "Ш§Ш±ЩЉШЄШ±ЩЉШ§"
+msgid "Under Devel ... please wait."
+msgstr "ШЄШ­ШЄ Ш§Щ„ШЄШ·Щ€ЩЉШ± ... Ш§Щ†ШЄШёШ± ЩЃШ¶Щ„Ш§"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Western Sahara"
-msgstr "Ш§Щ„ШµШ­Ш±Ш§ШЎ Ш§Щ„ШєШ±ШЁЩЉШ©"
+msgid "Czech Republic"
+msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Ш§Щ„ШЄШґЩЉЩѓ"
 
 #: ../../lang.pm:1
 #, c-format
 msgid "Egypt"
 msgstr "Щ…ШµШ±"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Estonia"
-msgstr "Ш§ШіШЄЩ€Щ†ЩЉШ§"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ecuador"
-msgstr "Ш§Щ„ШҐЩѓЩ€Ш§ШЇЩ€Ш±"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Algeria"
-msgstr "Ш§Щ„Ш¬ШІШ§Ш¦Ш±"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Ш§Щ„ШЇЩ€Щ…ЩЉЩ†ЩЉЩѓШ§Щ†"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominica"
-msgstr "ШЇЩ€Щ…ЩЉЩ†ЩЉЩѓШ§"
-
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Denmark"
-msgstr "Ш§Щ„ШЇЩ†Щ…Ш§Ш±Щѓ"
+msgid "Old configuration (isdn4net)"
+msgstr "ШҐШ№ШЇШ§ШЇ Щ‚ШЇЩЉЩ… (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Djibouti"
-msgstr "Ш¬ЩЉШЁЩ€ШЄЩЉ"
+msgid "Sound card"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Cyprus"
-msgstr "Щ‚ШЁШ±Шµ"
+msgid "Import Fonts"
+msgstr "Ш§ШіШЄЩЉШ±Ш§ШЇ Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Christmas Island"
-msgstr "Ш¬ШІШ± Ш§Щ„ЩѓШ±ЩЉШіЩ…Ш§Ші"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© Microsofr Windows ЩѓШЁЩЉШ±Ш©.\n"
+"Ш§Щ‚ШЄШ±Ш­ ШЈЩ† ШЄШєЩЉШ± Ш­Ш¬Щ… Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш©\n"
+"(Ш§Ш¶ШєШ· Ш№Щ„ЩЉЩ‡Ш§ Ш«Щ… Ш§Ш®ШЄШ± \"ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Cape Verde"
-msgstr "ЩѓЩЉШЁ ЩЃЩЉШ±ШЇЩЉ"
+msgid "Suppress Temporary Files"
+msgstr "ШЈШЁШ·Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Ш¤Щ‚ШЄШ©"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cuba"
-msgstr "ЩѓЩ€ШЁШ§"
+msgid "Change partition type"
+msgstr "ШєЩЉШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Colombia"
-msgstr "ЩѓЩ€Щ„Щ€Щ…ШЁЩЉШ§"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
+"ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶\n"
+"\n"
+"   ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ€ Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ† ЩЃЩЉ Ш§Щ„Ш­ШЇЩ€ШЇ\n"
+"Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш№ШЄШ§ШЇ. Ш§Ш®ШЄШ± ШЄЩ„Щѓ Ш§Щ„ШЄЩЉ ШЄЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ (Щ„Ш§ ШЄШІШ§Щ„\n"
+"ШЄШіШЄШ·ЩЉШ№ ШЄШєЩЉЩЉШ± ШЄЩ„Щѓ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ). ЩЉШЄЩ… Ш№Ш±Ш¶ Ш№ЩЉЩ†Ш©\n"
+"Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ©."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Cameroon"
-msgstr "Ш§Щ„ЩѓШ§Щ…ЩЉШ±Щ€Щ†"
+msgid "Network Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ ШґШЁЩѓШ©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Chile"
-msgstr "ШЄШґЩЉЩ„ЩЉ"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Ш§Ш№Ш±Ш¶ Ш§Щ„ШіЩ…Ш§ШЄ\n"
+"ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Ш¬ШІШ± Ш§Щ„ЩѓЩ€Щѓ"
+msgid "Statistics"
+msgstr "Ш§Ш­ШµШ§Ш¦ЩЉШ§ШЄ"
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "ЩѓЩ€ШЄ ШЇЩЉЩЃЩ€Ш§Ш±"
+msgid "(on %s)"
+msgstr "(Ш№Щ„Щ‰ %s)"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr "Ш§Щ„ШіЩ€ЩЉШіШ±ЩЉШ©"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Ш§Щ„ЩѓЩ€Щ†ШєЩ€ ШЁШ±Ш§ШІШ§ЩЃЩЉЩ„"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr "Щ…ЩѓШЄШЁШ© ШЄШ­Щ…ЩЉ Щ…Щ† Щ‡Ш¬Щ…Ш§ШЄ buffer overflow Щ€ format string"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Central African Republic"
-msgstr "Ш¬Щ…Щ‡Щ€Ш±ЩЉШ© Щ€ШіШ· ШЈЩЃШ±ЩЉЩ‚ЩЉШ©"
+msgid "average"
+msgstr "Щ…ШЄЩ€ШіШ·"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Ш§Щ„ЩѓЩ€Щ†ШєЩ€ ЩѓЩЉЩ†ШґШ§ШіШ§"
+msgid "New printer name"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ©"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Ш¬ШІШ± Ш§Щ„ЩѓЩ€ЩѓЩ€Ші"
+msgid "Equatorial Guinea"
+msgstr "ШєЩЉЩ†ЩЉШ§ Ш§Щ„ШҐШіШЄЩ€Ш§Ш¦ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Canada"
-msgstr "ЩѓЩ†ШЇШ§"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Belize"
-msgstr "ШЁЩЉЩ„ЩЉШІ"
+msgid "Build Backup"
+msgstr "Ш§ШЁЩ†ЩЉ Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Belarus"
-msgstr "Ш±Щ€ШіЩЉШ§ Ш§Щ„ШЁЩЉШ¶Ш§ШЎ"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr "Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЈЩ…Ш± \"%s <file> ШЈЩ€ \"%s <file>\".\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Botswana"
-msgstr "ШЁЩ€ШЄШіЩ€Ш§Щ†Ш§"
+msgid "Currently, no alternative possibility is available"
+msgstr "Ш­Ш§Щ„ЩЉШ§Щ‹ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Ш§Ш­ШЄЩ…Ш§Щ„ ШЁШЇЩЉЩ„"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bouvet Island"
-msgstr "Ш¬ШІЩЉШ±Ш© ШЁЩ€ЩЃЩЉЩ‡"
+msgid "Romanian (qwertz)"
+msgstr "Ш§Щ„Ш±Щ€Щ…Ш§Щ†ЩЉШ© (qwertz)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Bhutan"
-msgstr "ШЁЩ€ШЄШ§Щ†"
+msgid "Write Config"
+msgstr "Ш§ЩѓШЄШЁ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Bahamas"
-msgstr "Ш¬ШІШ± Ш§Щ„ШЁШ§Щ‡Ш§Щ…Ш§"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"Щ…Ш±Ш§Щ‚ШЁ routed ЩЉШіЩ…Ш­ ШЁШЄШ­ШЇЩЉШ« Ш¬ШЇЩ€Щ„ Щ…Щ€Ш¬Щ‡ IP Ш§Щ„ШўЩ„ЩЉ (IP router table) Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ RIP. ШЁЩЉЩ†Щ…Ш§ ЩЉШіШЄШ®ШЇЩ… RIP Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШµШєЩЉШ±Ш©, ШЄШ­ШЄШ§Ш¬ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШЈЩѓШЁШ±\n"
+"Ш§Щ„Щ‰ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ ШЄЩ€Ш¬ЩЉЩ‡ Щ…Ш№Щ‚ШЇШ© ШЈЩѓШ«Ш±."
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Brazil"
-msgstr "Ш§Щ„ШЁШ±Ш§ШІЩЉЩ„"
+msgid "Kiribati"
+msgstr "ЩѓЩЉШ±ЩЉШЁШ§ШЄЩЉ"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bolivia"
-msgstr "ШЁЩ€Щ„ЩЉЩЃЩЉШ§"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr "ШіЩ„Ш·Щ†Ш© ШЁШ±Щ€Щ†Ш§ЩЉ"
+msgid "Browse"
+msgstr "Ш§ШіШЄШ№Ш±Ш¶"
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Bermuda"
-msgstr "ШЁШ±Щ…Щ€ШЇШ§"
+msgid "CDROM"
+msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Benin"
-msgstr "ШЁЩ†ЩЉЩ†"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЈЩ† ШЄШ­Ш§Щ€Щ„ ШЈЩ† ШЄШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШўЩ†Шџ"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Burundi"
-msgstr "ШЁЩ€Ш±Щ€Щ†ШЇЩЉ"
+msgid "Belgian"
+msgstr "Ш§Щ„ШЁЩ„Ш¬ЩЉЩѓЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bahrain"
-msgstr "Ш§Щ„ШЁШ­Ш±ЩЉЩ†"
+msgid "Do you have an ISA sound card?"
+msgstr "Щ‡Щ„ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ ISAШџ"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Bulgaria"
-msgstr "ШЁЩ„ШєШ§Ш±ЩЉШ§"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЈЩЉ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Ш§ЩЉШ«Ш±Щ†ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ.\n"
+"Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш№ШЇШ§ШЇ Щ†Щ€Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ Щ‡Ш°Ш§."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Burkina Faso"
-msgstr "ШЁЩ€Ш±ЩѓЩЉЩ†Ш§ЩЃШ§ШіЩ€"
+msgid "Windows"
+msgstr "Windows"
 
-#: ../../lang.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Bangladesh"
-msgstr "ШЁЩ†ШєЩ„Ш§ШЇЩЉШґ"
+msgid "Can't make screenshots before partitioning"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ ШєЩ…Щ„ Щ„Щ‚Ш·Ш§ШЄ Щ„Щ„ШґШ§ШґШ© Щ‚ШЁЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Barbados"
-msgstr "ШЁШ§Ш±ШЁШ§ШЇЩ€Ші"
+msgid "Host Name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Ш§Щ„ШЁЩ€ШіЩ†Ш© Щ€ Ш§Щ„Щ‡Ш±ШіЩѓ"
+msgid "/File/Save _As"
+msgstr "/Щ…Щ„ЩЃ/Ш­ЩЃШё _ШЁШ§ШіЩ…"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "ШЈШ°Ш±ШЁЩЉШ¬Ш§Щ†"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
+"Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЄШ­ШЄШ§Ш¬ ЩЃЩ‚Ш· Ш§Щ„Щ‰ "
+"ШЄШґШєЩЉЩ„ Ш®ЩЉШ§Ш± \"Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©\"; ШіШЄЩ‚Щ€Щ… "
+"Ш®Ш§ШЇЩ…Ш§ШЄ CUPS ШЁШҐШ№Щ„Ш§Щ… Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш№Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ„ШЇЩЉЩ‡Ш§. ЩѓШ§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ… "
+"Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„ЩЉЩ‡Ш§ Щ…Щ† Щ‚ЩђШЁЩ„ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©\" Ш№Щ„Щ‰ Щ†Ш§ЩЃШ°Ш© "
+"Printerdrake Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Ш®Ш§ШЇЩ…Ш§ШЄ CUPS ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ©, ЩЃШ№Щ„ЩЉЩѓ ШЈЩ† "
+"ШЄЩ‚Щ€Щ… ШЁШҐШЇШ®Ш§Щ„ Ш№Щ†Ш§Щ€ЩЉЩ† IP Щ€ ШЈШ±Щ‚Ш§Щ… Ш§Щ„Щ…Щ†Ш§ЩЃШ° (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ) Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ "
+"Щ…Щ† Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ."
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Aruba"
-msgstr "ШЈШ±Щ€ШЁШ§"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©, Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡ ЩЉШЇЩ€ЩЉШ§Щ‹Шџ"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "Australia"
-msgstr "ШЈЩ€ШіШЄШ±Ш§Щ„ЩЉШ§"
+msgid "Delay before booting default image"
+msgstr "ШЄЩ€Щ‚ЩЉШЄ Щ…Ш§ Щ‚ШЁЩ„ Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШµЩ€Ш±Ш© Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "American Samoa"
-msgstr "ШіШ§Щ…Щ€Ш§ Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ©"
+msgid "Restrict command line options"
+msgstr "ШЄШґШЇЩЉШЇ Ш®ЩЉШ§Ш±Ш§ШЄ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Argentina"
-msgstr "Ш§Щ„ШЈШ±Ш¬Щ†ШЄЩЉЩ† "
+msgid "East Europe"
+msgstr "ШЈЩ€Ш±Щ€ШЁЩ‘Ш§ Ш§Щ„ШґЩ‘Ш±Щ‚ЩЉЩ‘Ш©"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Ш§Щ„Щ‚Ш·ШЁ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉ"
+msgid "Use free space"
+msgstr "Ш§ШіШЄШ№Щ…Щ„ Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„ЩЃШ§Ш±ШєШ©"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Angola"
-msgstr "ШЈЩ†ШєЩ€Щ„Ш§"
+msgid "use dhcp"
+msgstr "Ш§ШіШЄШ®ШЇЩ… dhcp"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "ШЈЩ†ШЄЩЉЩ„ Щ‡Щ€Щ„Щ†ШЇШ§"
+msgid "Mail alert"
+msgstr "ШЄЩ†ШЁЩЉШ© ШЁШ±ЩЉШЇЩЉ"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "ШЈШ±Щ…ЩЉЩ†ЩЉШ§"
+msgid "Internet configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Albania"
-msgstr "ШЈЩ„ШЁШ§Щ†ЩЉШ§"
+msgid "Uzbekistan"
+msgstr "ШЈЩ€ШІШЁЩѓШіШЄШ§Щ†"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Anguilla"
-msgstr "ШЈЩ†ШєЩ€ЩЉЩ„Ш§"
+msgid "Detected %s"
+msgstr "ШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "ШЈЩ†ШЄЩЉШєЩ€Ш§ Щ€ ШЁШ§Ш±ШЁЩ€ШЇШ§"
+msgid "/Autodetect _printers"
+msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† Ш§Щ„_Ш·Ш§ШЁШ№Ш§ШЄ"
 
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "Ш§Щ„ШҐЩ…Ш§Ш±Ш§ШЄ Ш§Щ„Ш№Ш±ШЁЩЉШ© Ш§Щ„Щ…ШЄШ­ШЇШ©"
+msgid "Finish"
+msgstr "ШҐЩ†ШЄЩ‡Ш§ШЎ"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Andorra"
-msgstr "ШЈЩ†ШЇЩ€Ш±Ш§"
+msgid "Show automatically selected packages"
+msgstr "ШЈШёЩ‡Ш± Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШЈЩ„ЩЉШ§Щ‹"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Afghanistan"
-msgstr "ШЈЩЃШєШ§Щ†ШіШЄШ§Щ†"
+msgid "CPU flags reported by the kernel"
+msgstr "CPU flags reported by the kernel"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:RTL"
-
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
-
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Ш§Ш­Ш°ЩЃ logical volumes ШЈЩ€Щ„Ш§Щ‹\n"
-
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
-"ШЇШ№Щ… PCMCIA ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ШЁШ№ШЇ Ш§Щ„ШўЩ† Щ„ШҐШµШЇШ§Ш± Ш§Щ„Щ†Щ€Ш§Ш© 2.2. ЩЃШ¶Щ„Ш§ Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШҐШµШЇШ§Ш± 2.4"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Ш­Ш±Щѓ Ш№Ш¬Щ„Ш© Ш§Щ„ЩЃШЈШ±Ш©!"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ЩЃШЈШ±Ш©,"
-
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
-msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Ш®ШЄШЁШ± Ш§Щ„ЩЃШЈШ±Ш©"
+msgid "Togo"
+msgstr "ШЄЩ€Ш¬Щ€"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "No mouse"
-msgstr "Щ„Ш§ ЩЃШЈШ±Ш©"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Ш­ШµЩ„ ШґШ¦ Ш®Ш·ШЈ! - Щ‡Щ„ ШЄЩ… ШЄШ«ШЁЩЉШЄ mkisofs?"
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "none"
-msgstr "Щ„Ш§ ШґШ¦"
+msgid "16 MB"
+msgstr "16 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../mouse.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 ШЈШІШ±Ш§Ш±"
+msgid "Please try again"
+msgstr "Ш±Ш¬Ш§ШЎ Ш¬Ш§Щ€Щ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "2 buttons"
-msgstr "ШІШ±Щ‘ЩЉЩ†"
+msgid "The model is correct"
+msgstr "Ш§Щ„Ш·Ш±Ш§ШІ ШµШ­ЩЉШ­"
 
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "1 button"
-msgstr "ШІШ± Щ€Ш§Ш­ШЇ"
+msgid "FAT resizing failed: %s"
+msgstr "ЩЃШґЩ„ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… FAT: %s"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Individual package selection"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± Щ…ЩЃШ±ШЇ Щ„Щ„Ш­ШІЩ…"
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "This partition is not resizeable"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„ШЄЩ‚ШіЩЉЩ… ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (serial, old C7 type)"
+msgid "Location"
+msgstr "Ш§Щ„Щ…ЩѓШ§Щ†"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "USA (cable-hrc)"
+msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш©  (cable-hrc)"
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Journalised FS"
+msgstr "Journalised FS"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Guatemala"
+msgstr "ШєЩ€Ш§ШЄЩЉЩ…Ш§Щ„Ш§"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "This machine"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©"
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Ш­Ш±ЩЃ ШіЩ€Ш§Щ‚Ш© DOS: %s (Щ…Ш¬Ш±ШЇ ШЄШ®Щ…ЩЉЩ†)\n"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select the files or directories and click on 'OK'"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ„ЩЃШ§ШЄ ШЈЩ€ Ш§Щ„ШЈШЇЩ„Ш© Ш«Щ… Ш§Щ†Щ‚Ш± 'ШЈШ¶ЩЃ'"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bahrain"
+msgstr "Ш§Щ„ШЁШ­Ш±ЩЉЩ†"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "omit scsi modules"
+msgstr "SCSI Ш§Щ‡Щ…Щ„ Щ€Ш­ШЇШ§ШЄ Ш§Щ„"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Generic 3 Button Mouse"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "Ш№Ш§Ш¦Щ„Ш© Ш§Щ„Щ…Ш№Ш§Щ„Ш­ (Щ…Ш«Щ„Ш§: 6 Щ„ЩЃШ¦Ш© i686)"
 
-#: ../../mouse.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Щ„ШЈЩ†Щѓ ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ«ШЁЩЉШЄ Ш№ШЁШ± Ш§Щ„ШґШЁЩѓШ©, ЩЃЩ‚ШЇ ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+"Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚ Щ„Ш­ЩЃШё Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ, ШЈЩ€ Ш§Щ†Щ‚Ш± Ш§Щ„ШєШ§ШЎ Щ„ШҐШ№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
+"Щ€ Ш§Щ„ШґШЁЩѓШ©.\n"
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Keyboard layout: %s\n"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­: %s\n"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШ®ШЄШ§Ш± Ш§Ш°Ш§ ЩѓШ§Щ† ЩЉШ¬ШЁ Щ„Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© "
+"Щ„Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©."
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid "Maltese (US)"
+msgstr "Ш§Щ„Щ…Ш§Щ„Ш·ЩЉШ© (ШЈЩ…Ш±ЩЉЩѓШ§)"
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Generic"
-msgstr "Generic"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"ШЄШ­Щ…Щ‘Щ„ Щ€ ШЄШІЩЉЩ„ ШЄШ­Щ…ЩЉЩ„ ЩѓЩ„ Щ†Щ‚Ш§Ш· ШЄШ­Щ…ЩЉЩ„ ШЈЩ†ШёЩ…Ш© Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШґШЁЩѓШ© (NFS)Щ€ SMB (Щ…ШЇЩЉШ±\n"
+"Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©/Windows) Щ€ NCP (NetWare)."
 
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Tvcard"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Ш§Щ„Ш§Щ†ШЄЩ‚Ш§Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ€Ш¶Ш№ Ш§Щ„Ш№Ш§ШЇЩЉ"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
+msgid "Size"
+msgstr "Ш­Ш¬Щ…"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "ШєЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Ш§Щ„Щ‚ЩЉШ§ШіЩЉ"
+msgid "Greenland"
+msgstr "ШєШ±ЩЉЩ†Щ„Ш§Щ†ШЇ"
 
 #: ../../mouse.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Toggle between flat and group sorted"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Collapse Tree"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Expand Tree"
-msgstr "Expand Tree"
-
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Info"
-msgstr "Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ"
-
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Щ‡Щ„ Щ‡Ш°Ш§ ШµШ­ЩЉШ­ ? "
-
-#: ../../my_gtk.pm:1
-#, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ЩѓШЄШ§ШЁШ© Ш§Щ„Щ‰ Ш§Щ„Щ…Щ„ЩЃ %s"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Щ…Щ„ЩЃ Щ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ ШіЩЉШ¦"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„Щ…Щ„ЩЃ %s: %s"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr "Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШґШ±ЩЉШ· Щ„ЩЉШіШЄ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШµШ­ЩЉШ­Ш©. Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШґШ±ЩЉШ· Щ‡ЩЉ %s."
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© ЩЃЩЉ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ШЇЩЉЩѓ Щ„ЩѓЩ†ЩЉ Щ„Ш§ ШЈШіШЄШ·ЩЉШ№ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§.\n"
-"Ш§Щ„Ш­Щ„ Ш§Щ„Щ€Ш­ЩЉШЇ Щ‡Щ€ ШЈЩ† ШЄЩ†Щ‚Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ© Щ„ШЄШ­ШµЩ„ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш­Ш© ШЁЩЉЩ† Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ "
-"Ш§Щ„Щ…Щ…ШЄШЇШ©."
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ…ШЄШЇШ© ШєЩЉШ± Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЁЩЉШ¦Ш©"
-
-#: ../../partition_table.pm:1
-#, c-format
-msgid "mount failed: "
-msgstr "ЩЃШґЩ„ Ш§Щ„ШЄШ­Щ…ЩЉЩ„: "
-
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "Ш±ШЁЩ…Ш§"
+"ШЄЩ… Ш№Щ…Щ„ Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+"Щ€ Щ‡ЩЉ Щ…Щ…ЩѓЩ‘Щ†Ш© Ш­Ш§Щ„ЩЉШ§Щ‹.\n"
+"\n"
+"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "nice"
-msgstr "ШёШ±ЩЉЩЃ"
+msgid "Delete All NBIs"
+msgstr "Ш§Ш­Ш°ЩЃ ЩѓЩ„ NBI"
 
-#: ../../pkgs.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "very nice"
-msgstr "ШёШ±ЩЉЩЃ Ш¬ШЇШ§Щ‹"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "important"
-msgstr "Щ…Щ‡Щ…"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
+"if set, send the mail report to this email address else send it to root."
 
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "must have"
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Щ„ШЇЩЉЩѓ"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "ШЈЩЉ Ш§Ш№ШЇШ§ШЇ Щ„ЩЂXFree ШЄШ±ЩЉШЇШџ"
 
-#: ../../raid.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ЩЉШіШЄ ЩѓШ§ЩЃЩЉШ© Щ„Щ…ШіШЄЩ€Щ‰ RAID %d\n"
+msgid "More"
+msgstr "Ш§Щ„Щ…ШІЩЉШЇ"
 
-#: ../../raid.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "ЩЃШґЩ„ mkraid"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"ШЁЩ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ, ЩЉЩѓЩ€Щ† Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШµШЁШ­ Щ…Щ…ЩѓЩ†Ш§Щ‹.\n"
+"Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ШЁШґЩѓЩ„ ЩѓШ§ЩЃЩЉ Щ„Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШіШЄШ·ЩЉШ№ Щ‚ШЁЩ€Щ„\n"
+"Ш§ШЄШµШ§Щ„Ш§ШЄ Щ…Щ† Ш№Щ…Щ„Ш§ШЎ ЩѓШ«ЩЉШ±ЩЉЩ†. Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Щ…Ш¬Ш±ШЇ Ш№Щ…ЩЉЩ„ Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
+"ЩЃШ§Щ„ШЈШ¬ШЇШ± ШЁЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ ШЈЩ‚Щ„."
 
-#: ../../raid.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "ЩЃШґЩ„ mkraid (Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Ш­ШІЩ…Ш© raidtools Щ…ЩЃЩ‚Щ€ШЇШ©Шџ)"
+msgid "Account Password"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ„Щ„Ш­ШіШ§ШЁ"
 
-#: ../../raid.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШ© ШЄШ¬ШІШ¦Ш© Ш§Щ„Щ‰ RAID _Ш§Щ„Щ…Ш¬Щ‡ШІ_ md%d"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Щ„Щ‚ШЇ Щ‚Ш±Ш±ШЄ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш©.\n"
+"Щ‡Ш°Ш§ ЩЉШ№Щ†ЩЉ ШЈЩ†Щ‡ Щ„ШЇЩЉЩѓ Щ…Ш­Щ…Щ‘Щ„ ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Ш°ЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡ Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ (Щ…Ш«Ш§Щ„: System "
+"Commander).\n"
+"\n"
+"Ш№Щ„Щ‰ ШЈЩЉ Щ‚Ш±Шµ ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Stop"
-msgstr "ШЄЩ€Щ‚ЩЃ"
+msgid "Tajik keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Ш·Ш§Ш¬ЩЉЩѓЩЉШ©"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Start"
-msgstr "Ш§ШЁШЇШЈ"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ Щ†Щ‚Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ… Ш№Щ…Щ„Щ‡Ш§ Щ„Щ„ЩЂSpooler %s Ш§Щ„Щ‰ %s, Ш§Щ„ЩЂspooler "
+"Ш§Щ„Ш­Ш§Щ„ЩЉ. ЩѓЩ„ ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© (Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Щ€ШµЩЃ, Ш§Щ„Щ…ЩѓШ§Щ†, Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш©, Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ "
+"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ) ЩЉШЄЩ… ШЈШ®Ш°Щ‡Ш§, Щ„ЩѓЩ† Щ„Щ† ЩЉШЄЩ… Щ†Щ‚Щ„ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ.\n"
+"Щ„Ш§ ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„ ЩѓЩ„ Ш§Щ„ШµЩЃЩ€ЩЃ Щ„Щ„ШЈШіШЁШ§ШЁ Ш§Щ„ШЄШ§Щ„ЩЉШ©:\n"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "On boot"
-msgstr "Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Font List"
+msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 msgstr ""
-"Ш№ЩЃЩ€Ш§Щ‹, Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ\n"
-"Ш§Ш¶Ш§ЩЃЩЉШ© Ш­ШІЩ„ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Щ€ Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "stopped"
-msgstr "Щ…ШЄЩ€Щ‚ЩЃШ©"
+msgid "Select file"
+msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "running"
-msgstr "ШЄШ№Щ…Щ„"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШґШЁЩѓШ© ШЈЩ€ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡:"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Ш§Ш®ШЄШ± ШЈЩЉ Ш®ШЇЩ…Ш§ШЄ ШЄШ±ЩЉШЇЩ‡Ш§ ШЈЩ† ШЄШЁШЇШЈ ШўЩ„ЩЉШ§Щ‹ Ш№Щ†ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ€Ш§Щ…Ш± ШЈЩЉШ¶Ш§Щ‹ ЩЃЩЉ Ш­Щ‚Щ„ \"ШЈЩ…Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш©\" ЩЃЩЉ Щ…Ш±ШЁШ№Ш§ШЄ Ш­Щ€Ш§Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш© "
+"ЩЃЩЉ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ, Щ„ЩѓЩ† Щ„Ш§ ШЄЩ‚Щ… Щ‡Щ†Ш§ ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…Щ„ЩЃ Щ„ШЈЩ† Ш§Щ„Щ…Щ„ЩЃ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ "
+"Ш·ШЁШ§Ш№ШЄЩ‡ ЩЉШЄЩ… Ш§Ш№Ш·Ш§Ш¤Щ‡ Щ…Щ† Щ‚ШЁЩ„ Ш§Щ„ШЄШ·ШЁЩЉЩ‚.\n"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Database Server"
-msgstr "Ш®Ш§ШЇЩ… Щ‚Щ€Ш§Ш№ШЇ ШЁЩЉШ§Щ†Ш§ШЄ"
+msgid "Japan"
+msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ†"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote Administration"
-msgstr "Ш§ШЇШ§Ш±Ш© Ш№Щ† ШЁШ№ШЇ"
+msgid "Print option list"
+msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../services.pm:1
+#: ../../standalone/localedrake:1
 #, c-format
-msgid "File sharing"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
+msgid "The change is done, but to be effective you must logout"
+msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄШєЩЉЩЉШ±, Щ€ Щ„ЩѓЩ† Щ„ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„Щ‡ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Щ„Ш®Ш±Щ€Ш¬"
 
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Internet"
-msgstr "Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Search servers"
+msgstr "Ш§ШЁШ­Ш« ЩЃЩЉ ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§ШЇЩ…"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printing"
-msgstr "Ш§Щ„Ш·ШЁШ§Ш№Ш©"
+msgid "NCP queue name missing!"
+msgstr "Ш§ШіЩ… ШµЩЃ NCP Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "ШЄШЁШЇШЈ Ш®Ш§ШЇЩ… Ш®Ш·Щ€Ш· X (Щ‡Ш°Ш§ Ш§Щ„ШІШ§Щ…ЩЉ Щ„ЩѓЩЉ ЩЉШ№Щ…Щ„ XFree)"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr "ШЄШ­Ш°ЩЉШ±, ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§ШЄШµШ§Щ„ ШҐЩ†ШЄШ±Щ†ШЄ ШўШ®Ш±, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ЩЉШіШЄШ®ШЇЩ… ШґШЁЩѓШЄЩѓ"
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Ш­Щ…Щ‘Щ„ Щ…ШґШєЩ„Ш§ШЄ ШЈШ¬Щ‡ШІШ© USB."
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш§Щ„Щ…ШіЩ…Щ‰ \"%s\""
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
-"Syslog Щ‡ЩЉ Ш§Щ„Щ€ШіЩЉЩ„Ш© Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ Щ„ШЄШіШ¬ЩЉЩ„ Ш§Щ„Ш±ШіШ§Ш¦Щ„\n"
-"Ш§Щ„Щ‰ Щ…Щ„ЩЃШ§ШЄ ШіШ¬Щ„Ш§ШЄ Ш№ШЇЩЉШЇШ©. Ш§Щ†Щ‡Ш§ ЩЃЩѓШ±Ш© Ш¬ЩЉШЇШ© ШЈЩ† ШЄЩ‚Щ€Щ… ШЇШ§Ш¦Щ…Ш§Щ‹ ШЁШЄШґШєЩЉЩ„ syslog."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "ЩЉШґШєЩ„ Щ†ШёШ§Щ… Ш§Щ„ШµЩ€ШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ"
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
 msgstr ""
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rwho ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„ШЁШ№ЩЉШЇЩЉЩ† ШЁШ§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†\n"
-"Ш§Щ„Ш°ЩЉЩ† ШіШ¬Щ„Щ€Ш§ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш¬Щ‡Ш§ШІ ЩЉШґШєЩ‘Щ„ Щ…Ш±Ш§Щ‚ШЁ rwho (Щ…Щ…Ш§Ш«Щ„ Щ„ЩЂ finger)."
+"ШЄШ№Ш°Ш± Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Щ†ШёШ§Щ… Ш§Щ„Щ…ЩЃШ§ШЄ %s. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШµШ­ЩЉШ­ Ш§Щ„ШЈШ®Ш·Ш§ШЎ (ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹, ЩЉЩ…ЩѓЩ† ШЈЩ† "
+"ШЄШ®ШіШ± ШЁЩЉШ§Щ†Ш§ШЄ)"
 
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rusers ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЈЩ† ЩЉШЄШ№Ш±ЩЃЩ€Ш§ Ш№Щ„Щ‰ Щ…Щ†\n"
-"ШіШ¬Щ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Щ…ШіШЄШ¬ЩЉШЁШ© Ш§Щ„ШЈШ®Ш±Щ‰."
+msgid "Turn your computer into a reliable server"
+msgstr "Ш§Ш¬Ш№Щ„ Ш¬Щ‡Ш§ШІЩѓ Ш®Ш§ШЇЩ…Ш§Щ‹ ЩЉШ№ШЄЩ…ШЇ Ш№Щ„ЩЉЩ‡"
 
-#: ../../services.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rstat ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЁШ§ШіШЄШ±Ш¬Ш§Ш№\n"
-"Ш§Ш­ШµШ§Ш¦ЩЉШ§ШЄ ШўШЇШ§ШЎ ШЈЩЉ Ш¬Щ‡Ш§ШІ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШґШЁЩѓШ©."
+msgid " (driver %s)"
+msgstr " (driver %s)"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+"Loopback file(s):\n"
+"   %s\n"
 msgstr ""
-"Щ…Ш±Ш§Щ‚ШЁ routed ЩЉШіЩ…Ш­ ШЁШЄШ­ШЇЩЉШ« Ш¬ШЇЩ€Щ„ Щ…Щ€Ш¬Щ‡ IP Ш§Щ„ШўЩ„ЩЉ (IP router table) Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ RIP. ШЁЩЉЩ†Щ…Ш§ ЩЉШіШЄШ®ШЇЩ… RIP Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШµШєЩЉШ±Ш©, ШЄШ­ШЄШ§Ш¬ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШЈЩѓШЁШ±\n"
-"Ш§Щ„Щ‰ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ ШЄЩ€Ш¬ЩЉЩ‡ Щ…Ш№Щ‚ШЇШ© ШЈЩѓШ«Ш±."
+"Щ…Щ„ЩЃ(Ш§ШЄ) Loopback:\n"
+"   %s\n"
 
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Ш№ЩЉЩ† Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§Щ… Ш§Щ„Щ‰ ШЈШ¬Щ‡ШІШ© ЩЃЩЉ Щ€Ш¶Ш№ Ш§Щ„ЩѓЩ„ЩЉШґЩЉЩ‡ (Щ…Ш«Щ„ ШЄШ¬ШІШ¦Ш§ШЄ\n"
-"Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ©), Щ„Щ„Ш§ШіШЄШ®Ш§Щ… ЩЃЩЉ ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Щ…Ш«Щ„ Oracle ШЈЩ€ Щ…ШґШєЩ„Ш§ШЄ DVD"
+msgid "I don't know"
+msgstr "Щ„Ш§ ШЈШ№Ш±ЩЃ "
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° \"%s\""
 
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"Postfix Щ‡Щ€ Ш№Щ…ЩЉЩ„ Щ„Щ†Щ‚Щ„ Ш§Щ„ШЁШ±ЩЉШЇ, ШЈЩЉ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Ш°ЩЉ ЩЉЩ†Щ‚Щ„ Ш§Щ„ШЁШ±ЩЉШЇ Щ…Щ† Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‰ ШўШ®Ш±."
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Щ‚Ш±Шµ Щ„Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ. Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© Ш®Ш·Ш±Ш© ШЁШ№Ш¶ Ш§Щ„ШґШ¦ Щ€ ЩЉШ¬ШЁ "
+"Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ ШЁШ­Ш°Ш±.\n"
+"\n"
+"ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© Ш№Щ…Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш°ЩЉ Щ‚Щ…ШЄ ШЁЩ‡ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±, Щ…Ш№ ШЄЩ†ШЁЩЉЩ‡Щѓ "
+"Щ„ШЁШ№Ш¶ Ш§Щ„Ш®Ш·Щ€Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ЩЃЩЉЩ‡Ш§ ШЄШєЩЉЩЉШ± Ш§Щ„Щ‚ЩЉЩ…, Ш­ШЄЩ‰ ШЄШЄЩ…ЩѓЩ† Щ…Щ† ШЄШєЩЉЩЉШ±Щ‡Ш§.\n"
+"\n"
+"Щ„ШЈЩ‚ШµЩ‰ Ш­ШЇ Щ…Щ† Ш§Щ„ШЈЩ…Ш§Щ†, ШіШЄШЄЩ… ШЄШ¬ШІШ¦Ш© Щ€ ШЄШ¬Щ‡ЩЉШІ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ© ШЁШґЩѓЩ„ ШўЩ„ЩЉ, Щ…Ш«Щ„Щ…Ш§ Ш§Ш®ШЄШ±ШЄ "
+"ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©Шџ"
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
 msgstr ""
-"ЩЉЩ‚Щ€Щ… portmapper ШЁШҐШЇШ§Ш±Ш© Ш§ШЄШµШ§Щ„Ш§ШЄ RPC, Щ€ Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ… Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ Щ…Ш«Щ„ NFS Щ€ NIS. Ш®Ш§ШЇЩ… portmap Щ…Щ† Ш§Щ„Щ„Ш§ШІЩ… ШЈЩ† ЩЉШ№Щ…Щ„ Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ©\n"
-"Ш§Щ„ШЄЩЉ ШЄШ№Щ…Щ„ ЩѓШ®Ш§ШЇЩ…Ш§ШЄ ШЄШіШЄШ®ШЇЩ… Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШіШЄЩЃЩЉШЇ Щ…Щ† ШўЩ„ЩЉШ© Ш№Щ…Щ„ RPC."
+"\n"
+"\n"
+"ШЁШ·Ш§Щ‚ШЄЩѓ ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ…ШґШєЩ„ %s\"%s\" Ш­Ш§Щ„ЩЉШ§Щ‹ (Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Щ‡Щ€ \"%s\")"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
-msgstr ""
-"ШЇШ№Щ… PCMCIA Щ…Щ‡Щ… Щ„ШЇШ№Щ… ШЈШґЩЉШ§ШЎ Щ…Ш«Щ„ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШҐЩЉШ«Ш±Щ†ШЄ Щ€\n"
-"Ш§Щ„Щ…Щ€ШЇЩ…Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЇЩЃШЄШ±ЩЉШ©. Щ„Щ† ЩЉШЄЩ… ШЁШЇШЎ Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© Ш§Щ„Ш§ Ш№Щ†ШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Щ„Ш°Ш§ ЩЃЩ„Ш§ "
-"Щ…ШіЩѓЩ„Ш© Ш№Щ†ШЇ ШЄШґШєЩЉЩ„Щ‡\n"
-"Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЄЩЉ Щ„Ш§ ШЄШ­ШЄШ§Ш¬Щ‡."
+msgid "Post Uninstall"
+msgstr "Щ…Ш§ ШЁШ№ШЇ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "ШЇШ№Щ… Ш·Ш§ШЁШ№Ш§ШЄ OKI 4w Щ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€Ш§ЩЃЩ‚Ш©."
+msgid " ("
+msgstr " ("
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"ШЄЩ‚Щ€Щ… ШЁШЄШґШєЩЉЩ„ Щ…ЩЃШЄШ§Ш­ numlock ШўЩ„ЩЉШ§Щ‹ ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±\n"
-"Щ€ XFree Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
+msgid "Cpuid level"
+msgstr "Щ…ШіШЄЩ€Щ‰ Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ ШґШ§Ш¦Ш№ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ„Щ‰ ШґШЁЩѓШ§ШЄ\n"
-"TCP/IP. Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© ШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Щ„ШЄШ­ЩѓЩ… ШЁШ§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚ NFS."
+msgid "Mongolian (cyrillic)"
+msgstr "Ш§Щ„Щ…Щ†ШєЩ€Щ„ЩЉШ© (ШіЩЉШ±ЩЉЩ„ЩЉШ©)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ ШґШ§Ш¦Ш№ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ„Щ‰ ШґШЁЩѓШ§ШЄ TCP/IP.\n"
-"Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© ШЄЩ€ЩЃШ± Щ€ШёШ§Ш¦ЩЃ NFS Щ„Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§ШЇЩ…Ш©, Щ€ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-"Щ…Щ„ЩЃ /etc/exports."
+msgid "Add a module"
+msgstr "Ш§Ш¶Ш§ЩЃШ© Щ€Ш­ШЇШ©"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"ШЄЩ†ШґШ·/ШЄШ®Щ…ШЇ ЩѓЩ„ Щ€Ш§Ш¬Щ‡Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Щ‡ЩЉШ¦Ш© ЩѓЩЉ ШЄШЁШЇШЈ\n"
-"Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
+msgid "Profile to delete:"
+msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш­Ш°ЩЃЩ‡:"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"ШЄШ­Щ…Щ‘Щ„ Щ€ ШЄШІЩЉЩ„ ШЄШ­Щ…ЩЉЩ„ ЩѓЩ„ Щ†Щ‚Ш§Ш· ШЄШ­Щ…ЩЉЩ„ ШЈЩ†ШёЩ…Ш© Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШґШЁЩѓШ© (NFS)Щ€ SMB (Щ…ШЇЩЉШ±\n"
-"Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©/Windows) Щ€ NCP (NetWare)."
+msgid "Local measure"
+msgstr "Ш§Ш¬Ш±Ш§ШЎ Щ…Ш­Щ„ЩЉ"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) Щ‡Щ€ Ш®Ш§ШЇЩ… ШЈШіЩ…Ш§ШЎ Щ†Ш·Ш§Щ‚ (DNS) Щ€ Ш§Щ„Ш°ЩЉ ЩЉШіШЄШ®ШЇЩ… Щ„Щ…Ш№Ш±ЩЃШ© ШЈШіЩ…Ш§ШЎ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ "
-"ШЈЩ€ Ш№Щ†Ш§Щ€ЩЉЩ† IP."
+msgid "busmouse"
+msgstr "busmouse"
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
-msgstr ""
-"Linux Virtual Server, ЩЉШіШЄШ®ШЇЩ… Щ„Ш№Щ…Щ„ Ш®Ш§ШЇЩ… Ш№Ш§Щ„ЩЉ Ш§Щ„ШЈШЇШ§ШЎ\n"
-"Щ€ ЩЉШ№ШЄЩ…ШЇ Ш№Щ„ЩЉЩ‡."
+msgid "Account Login (user name)"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШЇШ®Щ€Щ„ Щ„Щ„Ш­ШіШ§ШЁ"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd Щ‡Щ€ Щ…Ш±Ш§Щ‚ШЁ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Ш°ЩЉ ЩЉШ­ШЄШ§Ш¬Щ‡ ШЈЩ…Ш± lpr Щ„Щ„Ш№Щ…Щ„ ШЁШґЩ„ ШµШ­ЩЉШ­. ШЈШіШ§ШіШ§Щ‹\n"
-"Щ‡Щ€ Ш®Ш§ШЇЩ… ЩЉЩ€ШµЩ„ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ."
+msgid "Fdiv bug"
+msgstr "Fdiv bug"
 
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
 msgstr ""
-"Linuxconf ЩЉЩ‚Щ€Щ… ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ† ШЁШ§Щ„ШЄШ±ШЄЩЉШЁ Щ„Ш№Щ…Щ„ ШЁШ№Ш¶ Ш§Щ„ШЈШ№Щ…Ш§Щ„\n"
-"Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ„Щ„Щ…Ш­Ш§ЩЃШёШ© Ш№Щ„Щ‰ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…."
+"ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© DrakFirewall\n"
+"\n"
+"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§ШЄШµШ§Щ„Щѓ ШЁШ§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ…\n"
+"drakconnect Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "ШЄШ­Щ‚Щ‚ Щ€ ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ© Щ„Щ„Ш№ШЄШ§ШЇ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
+msgid "Benin"
+msgstr "ШЁЩ†ЩЉЩ†"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Ш§Ш№Ш§ШЇШ© ШЄЩ€Щ„ЩЉШЇ ШўЩ„ЩЉШ© Щ„ШЄШ±Щ€ЩЉШіШ© Ш§Щ„Щ†Щ€Ш§Ш© ЩЃЩЉ ШЇЩ„ЩЉЩ„ /boot Щ„ЩЂ\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "Uruguay"
+msgstr "ШЈЩ€Ш±Щ€ШєЩ€Ш§ЩЉ"
 
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© ШЄЩ‚Щ€Щ… ШЁШЄШ­Щ…ЩЉЩ„ Ш®Ш±ЩЉШ·Ш© Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ЩѓЩ…Ш§\n"
-"ШЄЩ… ШЄШ№ЩЉЩЉЩ†Щ‡Ш§ ЩЃЩЉ /etc/sysconfig/keyboard. ЩЉЩ…ЩѓЩ† Ш§Ш®ШЄЩЉШ§Ш± Щ„Щ€Ш®Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШЁШ§ШіШЄШ®ШЇШ§Щ… "
-"ШЈШЇШ§Ш© kbdconfig.\n"
-"ЩЉШ¬ШЁ ШЄШ±ЩѓЩ‡Ш§ Щ…Щ…ЩѓЩ‘Щ†Ш© ЩЃЩЉ ШЈШєЩ„ШЁ Ш§Щ„ШЈШ¬Щ‡ШІШ©."
+msgid "Path selection"
+msgstr "ШҐШ®ШЄЩЉШ§Ш± Ш§Щ„Щ…ШіШ§Ш±"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Name/IP address of host:"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP/Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ:"
 
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Monitor: %s\n"
+msgstr "Ш§Щ„ШґШ§ШґШ©: %s\n"
+
+#: ../../partition_table/raw.pm:1
 #, c-format
 msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
 msgstr ""
-"Щ…Ш±Ш§Щ‚ШЁ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШЈШіШ§ШіЩЉ (ЩЉШіЩ…Щ‰ Ш№Ш§ШЇШ©Щ‹ ШЁЩЂ inetd) ЩЉШЁШЇШЈ\n"
-"Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ†ШЇ Ш§Щ„Ш­Ш§Ш¬Ш©. Ш§Щ†Щ‡ Щ…ШіШ¤Щ€Щ„ Ш№Щ† ШЁШЇШЎ\n"
-"Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Ш®ШЇЩ…Ш§ШЄ, ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ telnet, ftp, rsh, Щ€ rlogin. ШЄШ№Ш·ЩЉЩ„ inetd ШіЩЉШ№Ш·Щ„\n"
-"ЩѓЩ„ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш©."
+"Щ‡Щ†Ш§Щѓ ШґШ¦ ШіЩЉШ¦ ЩЉШ­ШµЩ„ Щ„Щ„Щ‚Ш±Шµ. \n"
+"Щ„Щ‚ШЇ ЩЃШґЩ„ Ш§Ш®ШЄШЁШ§Ш± Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ. \n"
+"Щ‡Ш°Ш§ ЩЉШ№Щ†ЩЉ ШЈЩ† ЩѓШЄШ§ШЁШ© ШЈЩЉ ШґШ¦ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ ШіЩЉЩ†ШЄЩ‡ЩЉ ШЁШЁЩЉШ§Щ†Ш§ШЄ Ш№ШґЩ€Ш§Ш¦ЩЉШ© Щ€ ЩЃШ§ШіШЇШ©."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache Щ‡Щ€ Ш®Ш§ШЇЩ… Щ€ЩЉШЁ. Щ€ ЩЉЩЏШіШЄШ®ШЇЩ… Щ„Ш®ШЇЩ…Ш© Щ…Щ„ЩЃШ§ШЄ HTML Щ€ CGI."
+msgid "Printer host name or IP missing!"
+msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ Ш§Щ„ЩЂ IP Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake ЩЉЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ, Щ€ ЩЉЩ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ\n"
-"Ш§Щ„Ш¬ШЇЩЉШЇ/Ш§Щ„Щ…ШЄШєЩЉШ± ШЁШґЩѓЩ„ Ш§Ш®ШЄЩЉШ§Ш±ЩЉ."
+msgid "Please check all users that you want to include in your backup."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„Ш°ЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ¶Щ…ЩЉЩ†Щ‡Щ… ЩЃЩЉ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
 msgstr ""
-"ЩЉЩ‚Щ€Щ… GPM ШЁШҐШ¶Ш§ЩЃШ© ШЇШ№Щ… Ш§Щ„ЩЃШЈШ±Ш© Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Щ„ЩЉЩ†ЩѓШі ЩЃЩЉ Ш§Щ„Щ€Ш¶Ш№ Ш§Щ„Щ†ШµЩЉ Щ…Ш«Щ„\n"
-"Midnight Commander. Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш°Щ„Щѓ ЩЃШҐЩ†Щ‡ ЩЉШіЩ…Ш­ ШЁШ№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Щ‚Шµ Щ€ Ш§Щ„Щ„ШµЩ‚ ЩЃЩЉ ШіШ·Ш± "
-"Ш§Щ„ШЈЩ€Ш§Щ…Ш±,\n"
-"ЩѓЩ…Ш§ ЩЉШЄШ¶Щ…Щ† ШЇШ№Щ… Ш§Щ„Щ‚Щ€Ш§Ш¦Щ… Ш§Щ„Щ…Ш®ШЄШµШ±Ш© ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
+"Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ %s ЩЉШ¬ШЁ Ш§Ш№ШЇШ§ШЇЩ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ PrinterDrake.\n"
+"ЩЉЩ…ЩѓЩ† ШЄШґШєЩЉЩ„ PrinterDrake Щ…Щ† Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake ЩЃЩЉ Щ‚ШіЩ… Ш§Щ„Ш№ШЄШ§ШЇ."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ UNIX Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш­ШЇШЇШ© Щ…Щ† Щ‚ШЁЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…\n"
-"Ш№Щ†ШЇ ШЈШЇЩ€Щ‚Ш§ШЄ Щ…Ш­ШЇШЇШ© ШЇЩ€Ш±ЩЉШ§Щ‹. vixie cron ЩЉШ¶ЩЉЩЃ Ш№ШЇШЇШ§Щ‹ Щ…Щ† Ш§Щ„Щ…ШІШ§ЩЉШ§ Ш§Щ„Щ‰ UNIX\n"
-"cron Ш§Щ„ШЈШіШ§ШіЩЉ, ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ Ш­Щ…Ш§ЩЉШ© ШЈЩ…Щ†ЩЉШ© ШЈЩЃШ¶Щ„, Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ ШЄЩ‡ЩЉШ¦Ш© ШЈЩ‚Щ€Щ‰."
+msgid "Bangladesh"
+msgstr "ШЁЩ†ШєЩ„Ш§ШЇЩЉШґ"
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
-msgstr ""
-"ШЄШґШєЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§Щ„Щ…ЩЏШ¬ШЇЩ€Щ„Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЈЩ…Ш± at Ш№Щ†ШЇ Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Щ…Ш­ШЇШЇ\n"
-"Щ„ШЄШґШєЩЉЩ„ at, Щ€ ШЄЩ‚Щ€Щ… ШЁШЄШґШєЩЉЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§Щ„ШЇЩ‚Ш№ЩЉШ© Ш№Щ†ШЇЩ…Ш§ ЩЉЩѓЩ€Щ† Щ…ШЄЩ€ШіШ· Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ‚Щ„ЩЉЩ„Ш§ЩЋ."
+msgid "Japan (cable)"
+msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ† (cable)"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
-"ШЄЩЏШіШЄШ®ШЇЩ… apmd Щ„Щ…Ш±Ш§Щ‚ШЁШ© Ш­Ш§Щ„Ш© Ш§Щ„ШЁШ·Ш§Ш±ЩЉШ© Щ€ ШЄШіШ¬ЩЉЩ„Щ‡Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚ syslog.\n"
-"ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ШҐШєЩ„Ш§Щ‚ Ш§Щ„Ш¬Щ‡Ш§ШІ Ш№Щ†ШЇ Ш¶Ш№ЩЃ Ш§Щ„ШЁШ·Ш§Ш±ЩЉШ©."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron ШЈШЇШ§Ш© Щ„ШЄШґШєЩЉЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± ЩЃЩЉ ШЈЩ€Щ‚Ш§ШЄ Щ…Ш­ШЇШЇШ©."
+"\n"
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
+"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ШЈЩ€ "
+"Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ© ШЈЩ€ ШЁЩ…Ш§ЩѓЩЉЩ†Ш© Windows ШЁШ№ЩЉШЇШ©.\n"
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
+"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹. ШЈЩЉШ¶Ш§Щ‹ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш·Ш§ШЁШ№Ш©/"
+"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ€ ШЈШ¬Щ‡ШІШ© Windows Щ…Щ€ШµЩ€Щ„Ш© Щ€ Щ…ШґШєЩ‘Щ„Ш©.\n"
+"\n"
+"Щ„Ш§Ш­Шё ШЈЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ ШЈШ·Щ€Щ„ Щ…Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ "
+"Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЃЩ‚Ш·. Щ„Ш°Ш§ Щ‚Щ… ШЁШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† "
+"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ€/ШЈЩ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШіШЄШ¶Ш§ЩЃШ© Щ…Щ† Windows Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‡Ш°Щ‡ "
+"Ш§Щ„Щ…ЩЉШІШ©.\n"
+"\n"
+" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ШЄШґШєЩ‘Щ„ Щ†ШёШ§Щ… Ш§Щ„ШµЩ€ШЄ ALSA (Advanced Linux Sound Arachitecture)"
+msgid "Initial tests"
+msgstr "Ш§Щ„ШҐШ®ШЄШЁШ§Ш±Ш§ШЄ Ш§Щ„ШЈЩ€Щ„ЩЉШ©"
 
-#: ../../standalone.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Installing packages..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ±ЩѓЩЉШЁ Ш§Щ„Ш¬ШІЩ…..."
+msgid "Continue"
+msgstr "ШЄШ§ШЁШ№"
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Custom Restore"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Ш®ШµШµШ©"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
 msgstr ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"\"%s\": Ш§Ш°Ш§ ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШіЩЉШЄЩ… Ш№Ш±Ш¶Щ‡Ш§\n"
+"Щ‡Щ†Ш§. Ш§Ш°Ш§ Щ„Ш§Ш­ШёШЄ ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Щ…Ш№Ш±Щ€Ш¶Ш© Щ‡Щ†Ш§ Щ„ЩЉШіШЄ ШЄЩ„Щѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©\n"
+"ЩЃШ№Щ„Ш§Щ‹ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ Ш§Щ„ШІШ± Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„\n"
+"ШўШ®Ш±."
 
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "Script-based"
+msgstr "Script-based"
 
-#: ../../standalone.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgid "Error reading file %s"
+msgstr "Ш®Ш·ШЈ ЩЃЩЉ Щ‚Ш±Ш§ШЎШ© Ш§Щ„Щ…Щ„ЩЃ %s"
 
-#: ../../standalone.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "PLL setting:"
+msgstr "Ш§Ш№ШЇШ§ШЇ PLL:"
 
-#: ../../standalone.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© FAT ШЄЩ… ШЄШ­Щ…ЩЉЩ„Щ‡Ш§ Ш№Щ„Щ‰ /boot/efi"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid " on "
+msgstr " Ш№Щ„Щ‰ "
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "[keyboard]"
-msgstr "[keyboard]"
+msgid "The URL must begin with http:// or https://"
+msgstr "Ш§Щ„Ш№Щ†Щ€Ш§Щ† ЩЉШ¬ШЁ ШЈЩ† ЩЉШЁШЇШЈ ШЁЩЂ http:// ШЈЩ€ https://"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
 msgstr ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ Ш§Щ„ЩЂURI Щ…ШЁШ§ШґШ±Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Щ„ЩЂURI ЩЉШ¬ШЁ ШЈЩ† ЩЉШЄЩ€Ш§ЩЃЩ‚ Щ…Ш№ "
+"Щ…ШЄШ·Щ„ШЁШ§ШЄ CUPS ШЈЩ€ Foomatic. Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ Щ„ЩЉШіШЄ ЩѓЩ„ ШЈЩ†Щ€Ш§Ш№ Ш§Щ„ЩЂURI Щ…ШЇШ№Щ€Щ…Ш© Щ…Щ† "
+"Ш§Щ„ЩЂspoolers."
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+msgid "Other OS (SunOS...)"
+msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (SunOS...)"
 
-#: ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
-msgstr ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
+msgid "Install/Upgrade"
+msgstr "ШЄШ«ШЁЩЉШЄ/ШЄШ±Щ‚ЩЉШ©"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d Ш­ШІЩ…"
 
 #: ../../standalone.pm:1
 #, c-format
@@ -6709,4807 +6515,5162 @@ msgstr ""
 "--help                : show this message.\n"
 "--version             : show version number.\n"
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Domain Authentication Required"
+msgstr "Domain Authentication Required"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
-" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш­Ш±; ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ€ШІЩЉШ№Ш© Щ€/ШЈЩ€ ШЄШ№ШЇЩЉЩ„Щ‡\n"
-" ШЄШ­ШЄ ШЁЩ†Щ€ШЇ Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© (GPL) ЩѓЩ…Ш§ Щ†ЩЏШґЩђШ±ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-" Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш©; ШҐЩ…Ш§ Ш§ШҐШµШЇШ§Ш± Ш§Щ„Ш«Ш§Щ†ЩЉ Щ…Щ† Ш§Щ„ШЄШ±Ш®ЩЉШµ ШЈЩ€\n"
-" ШЈЩЉ Щ†ШіШ®Ш© ШЄШ§Щ„ЩЉШ© (Ш­ШіШЁ Ш§Ш®ШЄЩЉШ§Ш±Щѓ).\n"
 "\n"
-" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ ЩЉЩЏЩ€ШІЩ‘ЩЋШ№ Ш№Щ„Щ‰ ШЈЩ…Щ„ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…ЩЃЩЉШЇШ§,\n"
-" لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n"
-" Щ„Щ„ШҐШЄШ¬Ш§Ш± ШЈЩ€ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШєШ±Ш¶ Щ…Ш№ЩЉЩ†. Ш§Щ†ШёШ±\n"
-" Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„.\n"
 "\n"
-" ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ‚ШЇ ШЄШіЩ„Щ…ШЄ Щ†ШіШ®Ш© Щ…Щ† ШЄШ±Ш®ЩЉШµ GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш©\n"
-" Щ…Ш№ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬; ЩЃЩЉ Ш­Ш§Щ„Ш© Ш№ШЇЩ… ШЄШіЩ„Щ… Ш§Щ„Ш±Ш®ШµШ© Ш±Ш§ШіЩ„ Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш© Ш№Щ„Щ‰ Ш§Щ„Ш№Щ†Щ€Ш§Щ† "
-"Ш§Щ„ШЄШ§Щ„ЩЉ\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307,\n"
-" USA.\n"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Ш§Щ„Ш®Ш±Щ€Ш¬ Щ…Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Install updates"
-msgstr "ШЄШ«ШЁЩЉШЄ ШЄШ­ШЇЩЉШ«Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
+" ШґЩѓШ± Ш®Ш§Шµ:\n"
+"\t- Щ…ШґШ±Щ€Ш№ LTSP http://www.ltsp.org\n"
+"\t- Щ…Ш§ЩЉЩѓЩ„ ШЁШ±Ш§Щ€Щ† <mbrown\\@fensystems.co.uk>\n"
+"\n"
 
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
+msgid "Costa Rica"
+msgstr "ЩѓЩ€ШіШЄШ§Ш±ЩЉЩѓШ§"
 
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© X"
+msgid "Use libsafe for servers"
+msgstr "ШҐШіШЄШ®ШЇЩ… libsafe Щ„Щ„Щ…Щ„Щ‚Щ…Ш§ШЄ"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘ЩђЩ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Icelandic"
+msgstr "Ш§Щ„ШўЩЉШіЩ„Ш§Щ†ШЇЩЉШ©"
 
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Configure networking"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
 
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Add a user"
-msgstr "ШЈШ¶ЩЃ Щ…ШіШЄШ®ШЇЩ…"
+msgid "Please relog into %s to activate the changes"
+msgstr "ЩЉШ±Ш¬Щ‰ Ш§Ш№Ш§ШЇШ© ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ %s Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄ"
 
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "Root password"
-msgstr "ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш¬Ш°Ш±"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Install system"
-msgstr "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Lilo/grub mode"
+msgstr "Щ€Ш¶Ш№ Lilo/grub"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШіШЄЩЏШ«ШЁЩ‘ЩЋШЄ"
+msgid "Output"
+msgstr "Ш§Щ„Щ†Ш§ШЄШ¬"
 
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "Format partitions"
-msgstr "ШЄШ¬Щ‡ЩЉШІ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ"
+msgid "Circular mounts %s\n"
+msgstr "Circular mounts %s\n"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Partitioning"
-msgstr "ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЈЩ‚Ш±Ш§Шµ"
+msgid "Martinique"
+msgstr "Щ…Ш§Ш±ШЄЩЉЩ†ЩЉЩѓ"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "Ш§Ш®ШЄШ± Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
+msgid "HardDrive / NFS"
+msgstr "HardDrive / NFS"
 
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "a number"
+msgstr "Ш±Щ‚Щ…"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ©"
+msgid "Swedish"
+msgstr "Ш§Щ„ШіЩ€ЩЉШЇЩЉШ©"
 
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ЩЃШЈШ±Ш©"
+msgid "Which %s driver should I try?"
+msgstr "ШЈЩЉ Щ…ШґШєЩ„ %s ЩЉШ¬ШЁ ШЈЩ† Ш§ШіШЄШ®ШЇЩ…Щ‡Шџ"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "License"
-msgstr "Ш§Щ„ШЄШ±Ш®ЩЉШµ"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr "ШіЩ€ЩЃ ШЄШіШЄЩ„Щ… ШЄЩ†ШЁЩЉЩ‡Ш§Щ‹ ШҐШ°Ш§ ЩѓШ§Щ†ШЄ ШЈШ­ШЇ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШєЩЉШ± Ш№Ш§Щ…Щ„Ш©."
 
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Language"
-msgstr "Ш§Ш®ШЄШ± Щ„ШєШЄЩѓ"
+msgid "Filesystem types:"
+msgstr "ШЈЩ†Щ€Ш§Ш№ ШЈЩ†ШёЩ…Ш© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ:"
 
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ HP JetDirect"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "OK"
-msgstr "Щ…Щ€Ш§ЩЃЩ‚"
+msgid "Northern Mariana Islands"
+msgstr "Ш¬ШІШ± Щ…Ш§Ш±ЩЉШ§Щ†Ш§ Ш§Щ„ШґЩ…Ш§Щ„ЩЉШ©"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "Щ„Ш§ ШґШ¦"
 
-#: ../../ugtk.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "user :"
+msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ… :"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (Щ…ШґШєЩ„ Ш№Ш±Ш¶ Ш§Щ„ШЄШ«ШЁЩЉШЄ)"
+msgid "Please enter your password"
+msgstr "Ш±Ш¬Ш§ШЎ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
 msgstr ""
-"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„ШЄЩ…ШЄШ№ ШЁШЇШ№Щ… Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ…Ш№ XFree %s, \n"
-"Щ„Ш§Ш­Шё ШЈЩ† Щ‡Ш°Ш§ Ш§Щ„ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ€ Щ‚ШЇ ЩЉШЄШіШЁШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s Щ…Ш№ ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ…Ш№ XFree %s"
+"Щ„ШҐШіЩ… Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіШЄШ№Щ…Щ„Щ‡ (Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш¬ШЇЩЉШЇ ЩЉШЄЩ… Ш№Щ…Щ„Щ‡ ЩѓЩ†ШіШ®Ш© Щ…Щ† Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ) :"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s Щ…Ш№ ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ"
+msgid "Floppy"
+msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Please check if you want to erase your RW media (1st Session)"
 msgstr ""
-"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„ШЄЩ…ШЄШ№ ШЁШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ„ЩѓЩ† ЩЃЩ‚Ш· Щ…Ш№ XFree %s, \n"
-"Щ„Ш§Ш­Шё ШЈЩ† Щ‡Ш°Ш§ Ш§Щ„ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ€ Щ‚ШЇ ЩЉШЄШіШЁШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ.\n"
-"ШЁШ·Ш§Щ‚ШЄЩѓ Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ XFree %s Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЇШ№Щ€Щ…Ш© ШЁШґЩѓЩ„ ШЈЩЃШ¶Щ„ ЩЃЩЉ Щ€Ш¶Ш№ЩЉШ© "
-"Ш§Щ„Ш±ШіЩ€Щ… Ш«Щ†Ш§Ш¦ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ."
+"ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Щ…ШіШ­ Ш§Щ„Щ€ШіЩЉШ· Ш§Щ„Щ‚Ш§ШЁЩ„ Щ„ШҐШ№Ш§ШЇШ© Ш§Щ„ЩѓШЄШ§ШЁШ© (Ш§Щ„Ш¬Щ„ШіШ© "
+"Ш§Щ„ШЈЩ€Щ„Щ‰)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ„ЩѓЩ† ЩЃЩ‚Ш· Щ…Ш№ XFree %s.\n"
-"ШЁШ·Ш§Щ‚ШЄЩѓ Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ XFree %s Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЇШ№Щ€Щ…Ш© ШЁШґЩ„ ШЈЩЃШ¶Щ„ ЩЃЩЉ Ш§Щ„Щ€Ш¶Ш№ "
-"Ш«Щ†Ш§Ш¦ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ."
+msgid "Ghostscript referencing"
+msgstr "Ghostscript referencing"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Bootloader"
+msgstr "Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШЁШ·Ш§Щ‚Ш© \"%s\"%s ЩЃЩ‚Ш·"
+msgid "Move"
+msgstr "Щ†Щ‚Щ„"
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ…ШЄШЇШ§ШЇ Xinerama"
+msgid "Bootloader to use"
+msgstr "Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…ЩЏШіШЄШ®ШЇЩ…"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "Ш§Ш№ШЇШ§ШЇ ЩѓЩ„ Ш§Щ„Ш±Ш¤Щ€Ші ШЁШґЩѓЩ„ Щ…ШіШЄЩ‚Щ„"
+msgid "SMB server host"
+msgstr "Щ…ШіШЄШ¶ЩЉЩЃ Ш®Ш§ШЇЩ… SMB"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "ШЈЩЉ Ш§Ш№ШЇШ§ШЇ Щ„ЩЂXFree ШЄШ±ЩЉШЇШџ"
+msgid "Name Servers:"
+msgstr "Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШҐШіЩ…:"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "ШҐШ®ШЄШ± Ш­Ш¬Щ… Ш°Ш§ЩѓШ±Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ш§Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…Щ† Star Office/OpenOffice.org/GIMP"
 
-#: ../../Xconfig/card.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"Щ†ШёШ§Щ…Щѓ ЩЉШЇШ№Щ… Ш§Щ„ШҐШ№ШЇШ§ШЇ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш±Ш¤Щ€Ші.\n"
-"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
+"Linux Virtual Server, ЩЉШіШЄШ®ШЇЩ… Щ„Ш№Щ…Щ„ Ш®Ш§ШЇЩ… Ш№Ш§Щ„ЩЉ Ш§Щ„ШЈШЇШ§ШЎ\n"
+"Щ€ ЩЉШ№ШЄЩ…ШЇ Ш№Щ„ЩЉЩ‡."
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш±Ш¤Щ€Ші"
+msgid "4 billion colors (32 bits)"
+msgstr "4 ШЁЩ„ЩЉЩ€Щ† Щ„Щ€Щ† (32 ШЁШЄ)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose an X server"
-msgstr "ШҐШ®ШЄШ± Ш®Ш§ШЇЩ… X"
+msgid "Micronesia"
+msgstr "Щ…ЩЉЩѓШ±Щ€Щ†ЩЉШІЩЉШ§"
 
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "X server"
-msgstr "Ш®Ш§ШЇЩ… X"
+msgid "License"
+msgstr "Ш§Щ„ШЄШ±Ш®ЩЉШµ"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ ШЈЩ€ ШЈЩѓШ«Ш±"
+msgid "This may take a moment to generate the keys."
+msgstr "Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Щ„ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­."
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ (Щ…Ш­Щ„ЩЉШ©, TCP/Socket, Щ€ SMB)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (using pppoa) usb"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "8 MB"
-msgstr "8 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Щ„Щ‚ШЇ ШёЩ‡Ш± Ш®Ш·ШЈ - Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЈШ¬Щ‡ШІШ© ШµШ§Щ„Ш­Ш© ЩЉЩ…ЩѓЩ† Ш§Щ†ШґШ§ШЎ ШЈЩ†ШёЩ…Ш© Щ…Щ„ЩЃШ§ШЄ Ш¬ШЇЩЉШЇШ©. ШЄШЈЩѓШЇ Щ…Щ† "
+"Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ„Щ…Ш№Ш±ЩЃШ© ШґШЁШЁ Щ‡Ш°Щ‡ Ш§Щ„Щ…ШґЩѓЩ„Ш©"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Starting the printing system at boot time"
+msgstr "ШЁШЇШЎ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Do you want to start the connection at boot?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЁШЇШЎ Ш§Щ„Щ€ШµЩ„Ш© Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "1 MB"
-msgstr "1 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
+msgid "Processor ID"
+msgstr "Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
+msgid "Sound trouble shooting"
+msgstr "Ш­Щ„ Щ…ШґШ§ЩѓЩ„ Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
+msgid "Polish (qwerty layout)"
+msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ© (qwerty layout)"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "activate now"
+msgstr "Щ‚Щ… ШЁШ§Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШўЩ†"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
 "\n"
-"%s"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­ЩЃШё Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄШџ\n"
-"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ‡Щ€:\n"
 "\n"
-"%s"
+"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚  Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬:\n"
+"\n"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄШ«ШЁЩЉШЄ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© %s Ш№Щ„Щ‰ Щ†ШёШ§Щ… ЩЉШ№Щ…Щ„ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ %s.\n"
+"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЉШґШєЩ‘Щ„ Щ…Ш±Ш§Щ‚ШЁ (Ш№Щ…Щ„ЩЉШ© Ш®Щ„ЩЃЩЉШ©) ЩЉЩ‚Щ€Щ… ШЁШ§Щ†ШЄШёШ§Ш± Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ€ ЩЉШЄШ№Ш§Щ…Щ„ "
+"Щ…Ш№Щ‡Ш§. Щ‡Ш°Ш§ Ш§Щ„Щ…Ш±Ш§Щ‚ШЁ ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡ Ш№Щ† Щ…Щ† Щ‚ЩђШЁЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ€ "
+"Щ„Ш°Ш§ ЩЃЩ‚ШЇ ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Щ†Щ‚Ш·Ш© Щ…ШЁШЇШ¦ЩЉШ© Щ„Щ‡Ш¬Щ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†. Щ„Щ‡Ш°Ш§ ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ‚Щ„ЩЉЩ„ Щ…Щ† "
+"Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ Щ„ШЄШґШєЩЉЩ„Щ‡Ш§ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©Шџ"
 
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Test"
-msgstr "Ш§Ш®ШЄШЁШ§Ш±"
+msgid "Host \"%s\", port %s"
+msgstr "Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Resolution"
-msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶"
+msgid "This partition can't be used for loopback"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ЩЂloopback"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Monitor"
-msgstr "Ш§Щ„ШґШ§ШґШ©"
+msgid "File already exists. Use it?"
+msgstr "Ш§Щ„Щ…Щ„ЩЃ Щ…Щ€Ш¬Щ€ШЇ Щ…ШіШЁЩ‚Ш§, Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Шџ"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Graphic Card"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©"
+msgid "received: "
+msgstr "Щ…ЩЏШіШЄЩ‚ШЁЩ„: "
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„Ш±ШЈШіЩЉ"
+msgid "Right Alt key"
+msgstr "Щ…ЩЃШЄШ§Ш­ Alt Ш§Щ„ШЈЩЉЩ…Щ†"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„ШЈЩЃЩ‚ЩЉ"
+msgid "the list of alternative drivers for this sound card"
+msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШґШєЩ„Ш§ШЄ Ш§Щ„ШЁШЇЩЉЩ„Ш© Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
-msgstr ""
-"Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§Щ† Ш§Щ„Щ…Щ‡Щ…Ш§Щ† Ш¬ШЇШ§ Щ‡Щ…Ш§ Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„ШЈЩЃЩ‚ЩЉ, Щ€ Щ‡ЩЉ Ш§Щ„Щ†ШіШЁШ© Ш§Щ„ШЄЩЉ\n"
-"ЩЉШЄЩ… ЩЃЩЉЩ‡Ш§ Ш§Щ†Ш№Ш§Шґ Ш§Щ„ШґШ§ШґШ© ЩѓШ§Щ…Щ„Ш©, Щ€ Ш§Щ„ШЈЩ‡Щ… Щ‡Щ€ Щ†ШіШЁШ© Ш§Щ„ШЄШІШ§Щ…Щ† Ш§Щ„ШЈЩЃЩ‚ЩЉ\n"
-"Щ€ Ш§Щ„ШЄЩЉ ЩЃЩЉ Ш®Щ„Ш§Щ„Щ‡Ш§ ЩЉШЄЩ… Ш№Ш±Ш¶ Ш®Ш·Щ€Ш· Ш§Щ„Щ…ШіШ­.\n"
-"\n"
-"Щ…Щ† *Ш§Щ„Щ…Щ‡Щ… Ш¬ШЇШ§* ШЈЩ† Щ„Ш§ ШЄШ­ШЇШЇ Щ†Щ€Ш№ ШґШ§ШґШ© Щ…Ш№ Щ…ШЄЩ€ШіШ· ШЄШІШ§Щ…Щ†\n"
-"ШЈЩѓШЁШ± Щ…Щ† Щ…Щ‚ШЇШ±Ш© ШґШ§ШґШЄЩѓ Щ„ШЈЩ†Щѓ ШЁЩ‡Ш°Ш§ Щ‚ШЇ ШЄШЇЩ…Ш± ШґШ§ШґШЄЩѓ.\n"
-" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш№Ш§ШЇЩЉШ©."
+msgid "Gateway"
+msgstr "Gateway"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "ШЄШ№Ш°Ш± Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ€Ш¬Щ€ШЇ Plug 'n Play. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШµШ­ЩЉШ­Ш©"
+msgid "Scanner sharing"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©"
 
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Vendor"
-msgstr "Ш§Щ„Щ…ШµЩ†Ш№"
+msgid "Tonga"
+msgstr "ШЄЩ€Щ†Ш¬Щ€"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Plug'n Play"
-msgstr "Plug'n Play"
+msgid "Tunisia"
+msgstr "ШЄЩ€Щ†Ші"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "ШҐШ®ШЄШ± ШґШ§ШґШ©"
+msgid "Profile: "
+msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„:"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "Ш§Щ†Щ‚Ш± Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„ШіЩ„ШіЩ„Ш© Ш§Щ„ЩЉШіШ±Щ‰ Щ„Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄЩ‡ Щ‡Щ†Ш§."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Ш§Ш®ШЄШ± ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ€ Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ…"
+msgid "XawTV isn't installed!"
+msgstr "XawTV ШєЩЉШ± Щ…Ш«ШЁШЄ!"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Resolutions"
-msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
+"Ш§Щ†ШґШ¦/Щ„Щ†Щ‚Щ„\n"
+"Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ„ЩЂSSH"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 ШЁЩ„ЩЉЩ€Щ† Щ„Щ€Щ† (32 ШЁШЄ)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Щ„Ш§ ШЄЩЏШ¶Щ…Щ‘Щ† Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Щ‡Щ…Ш© (passws, group,fstab)"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 Щ…Щ„ЩЉЩ€Щ† Щ„Щ€Щ† (24 ШЁШЄ)"
+msgid "old static device name used in dev package"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‚ШЇЩЉЩ… Ш§Щ„ШіШ§ЩѓЩ† Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЃЩЉ Ш­ШІЩ…Ш© dev"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 ШЈЩ„ЩЃ Щ„Щ€Щ† (16 ШЁШЄ)"
+msgid "This label is already used"
+msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Щ…ШіШЄШ®ШЇЩ…Ш© Щ…ШіШЁЩ‚Ш§"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 ШЈЩ„ЩЃ Щ„Щ€Щ† (15 ШЁШЄ)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
+"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ШЈЩ€ "
+"Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ©.\n"
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
+"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹. ШЈЩЉШ¶Ш§Щ‹ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш·Ш§ШЁШ№Ш©/"
+"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ…Щ€ШµЩ€Щ„Ш© Щ€ Щ…ШґШєЩ‘Щ„Ш©.\n"
+"\n"
+"Щ„Ш§Ш­Шё ШЈЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ ШЈШ·Щ€Щ„ Щ…Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ "
+"Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЃЩ‚Ш·. Щ„Ш°Ш§ Щ‚Щ… ШЁШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† "
+"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©.\n"
+"\n"
+" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 Щ„Щ€Щ† (8 ШЁШЄ)"
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "ШЁШ№ШЇ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЄЩ‚ШіЩЉЩ… %s, ЩЃШҐЩ† ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© ШіШЄЩЃЩ‚ШЇ"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Is this the correct setting?"
-msgstr "Щ‡Щ„ Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШµШ­ЩЉШ­Шџ"
+msgid "Connection Time: "
+msgstr "Щ€Щ‚ШЄ Ш§Щ„ШҐШЄШµШ§Щ„:"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Leaving in %d seconds"
-msgstr "ШіШЄШЄЩ… Ш§Щ„Щ…ШєШ§ШЇШ±Ш© ЩЃЩЉ %d Ш«Щ€Ш§Щ†"
+msgid "select perm file to see/edit"
+msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ ШЄШµШ§Ш±ЩЉШ­ Щ„Ш±Ш¤ЩЉШЄЩ‡/ШЄШ­Ш±ЩЉШ±Щ‡"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
-"ШёЩ‡Ш± Ш®Ш·ШЈ:\n"
-"%s\n"
-"Ш­Ш§Щ€Щ„ ШЄШєЩЉЩЉШ± ШЁШ№Ш¶ Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ"
-
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ШЄШ­Ш°ЩЉШ±: Ш§Ш®ШЄШЁШ§Ш± ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Щ‡Ш°Щ‡ Щ‚ШЇ ЩЉШЄШіШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ"
+"ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ ШіЩ€Ш§Щ‚ШЄЩѓ Щ€ Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ.\n"
+"ШҐШ°Ш§ Щ„Щ… ЩЉЩѓЩ† Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЇЩЉЩѓ Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ Щ„Щ„ШҐЩ…ШЄЩ†Ш§Ш№ Ш№Щ† Ш§Щ„ШЄШ­ШЇЩЉШ« Ш§Щ„Ш­ЩЉ."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ¬Ш±ШЁШ© Ш§Щ„ШҐШ№ШЇШ§ШЇШџ"
+msgid "Use group id for execution"
+msgstr "Ш§ШіШЄШ®ШЇЩ… group id Щ„Щ„ШЄЩ†ЩЃЩЉШ°"
 
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„ШҐШ№ШЇШ§ШЇ"
+msgid "Choose the default user:"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉ:"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "What norm is your TV using?"
-msgstr "ШЈЩЉ Щ†ШёШ§Щ… ЩЉШіШЄШ®ШЇЩ…Щ‡ Ш¬Щ‡Ш§ШІ Ш§Щ„ШЄЩ„ЩЃШ§ШІ Щ„ШЇЩЉЩѓШџ"
+msgid "Gabon"
+msgstr "Ш§Щ„ШєШ§ШЁЩ€Щ†"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
 "\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
-"ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ ЩЉШЁШЇЩ€ ШЈЩ†Щ‡Ш§ ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Щ…Щ€ШµЩ„ Щ„Щ„ШЄЩ„ЩЃШ§ШІ.\n"
-"ЩЉЩ…ЩѓЩ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ·Ш§Щ‚Ш© Щ„Щ„Ш№Щ…Щ„ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ЩЂ frame-buffer.\n"
-"\n"
-"Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЄЩ€ШµЩЉЩ„ ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ… ШЁШ§Щ„ШЄЩ„ЩЃШ§ШІ Щ‚ШЁЩ„ ШЁШЇШЎ ШЄШґШєЩЉЩ„ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
-"Ш«Щ… Ш§Ш®ШЄШ± \"TVout\" Щ…Щ† Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№\n"
 "\n"
-"Щ‡Щ„ Щ„ШЇЩЉЩѓ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©Шџ"
+"Щ„Ш§ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ©; Щ‡Ш°Щ‡ Ш§Щ„ЩѓШ§ШЁШ№Ш§ШЄ ЩЉЩ…ЩѓЩ† "
+"Ш§ЩѓШЄШґЩ„ЩЃЩ‡Ш§ ШўЩ„ЩЉШ§Щ‹."
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш¬Ш№Щ„ Ш¬Щ‡Ш§ШІЩѓ ЩЉШЁШЇШЈ X ШЁШґЩѓЩ„ ШўЩ„ЩЉ ШЁШ№ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№.\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ X ШЈЩ† ШЁЩЉШЇШЈ ШЁШ№ШЇ ШҐШ№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш¬Щ‡Ш§ШІЩѓШџ"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш±ШіЩ€Щ…ЩЉШ© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„"
+"ЩЉШЇШ№Щ… Mandrake Linux Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Щ„ШєШ§ШЄ. Ш§Ш®ШЄШ±\n"
+"Ш§Щ„Щ„ШєШ§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§. ШіШЄЩѓЩ€Щ† Щ‡Ш°Щ‡ Щ…ШЄЩ€ЩЃШ±Ш©Щ‹ Ш№Щ†ШЇ\n"
+"Ш§ЩѓШЄЩ…Ш§Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ€ Ш§Ш№ШЇШ§Ш© ШЄШґШєЩЉЩ„ Ш§Щ„Щ†ШёШ§Щ…."
 
-#: ../../Xconfig/various.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Щ…ШґШєЩ„ XFree86: %s\n"
+msgid "Domain"
+msgstr "Ш§Щ„Щ†Ш·Ш§Щ‚"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Ш®Ш§ШЇЩ… XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш§Щ„ШЇЩ‚ЩЉЩ‚ Ш№Щ†ШЇ Ш§Щ„Ш­Ш§Ш¬Ш© )ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ %d Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ("
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ†: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS Ш§Щ„Ш«Ш§Щ†ЩЉ Щ„Щ„Щ…Щ€ЩЃШ± (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ш°Ш§ЩѓШ±Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ\n"
+msgid "Boot device"
+msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЄШ±ЩЉШЇ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ…Щ‡Ш§Шџ"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Ш§Щ†Ш№Ш§Шґ Ш§Щ„ШґШ§ШґШ© Ш§Щ„Ш±ШЈШіЩЉ: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Ш¬ШІШ± Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "ШЄШІШ§Щ…Щ† Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЈЩЃЩ‚ЩЉ: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "ШЈШЇШ§Ш© Щ„Щ…Ш±Ш§Щ‚ШЁШ© ШіШ¬Щ„Ш§ШЄ Щ†ШёШ§Щ…Щѓ"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Ш§Щ„ШґШ§ШґШ©: %s\n"
+msgid "Djibouti"
+msgstr "Ш¬ЩЉШЁЩ€ШЄЩЉ"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ЩЃШЈШ±Ш©: %s\n"
+msgid "detected on port %s"
+msgstr "ШЄЩ…  Ш§ЩѓШЄШґШ§ЩЃЩ‡ Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш©: %s\n"
+msgid "LPD"
+msgstr "LPD"
 
 #: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s\n"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mount point: "
-msgstr "Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Ш¬Щ‡Ш§ШІ DVDRAM"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Server: "
-msgstr "Ш§Щ„Ш®Ш§ШЇЩ…: "
+msgid "Splash selection"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШґШ§ШґШ§ШЄ"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "Ш§Щ„Ш№Щ†Щ€Ш§Щ† ЩЉШ¬ШЁ ШЈЩ† ЩЉШЁШЇШЈ ШЁЩЂ http:// ШЈЩ€ https://"
+msgid "Extended partition not supported on this platform"
+msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ…ШЄШЇШ© ШєЩЉШ± Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЁЩЉШ¦Ш©"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Ш±Ш¬Ш§ШЎ ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† Ш®Ш§ШЇЩ… WebDav"
+msgid "ISDN Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© ISDN"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mount point"
-msgstr "Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid "high"
+msgstr "Щ…Ш±ШЄЩЃШ№"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Server"
-msgstr "Ш®Ш§ШЇЩ…"
+msgid "Internet Connection Sharing"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Mount"
-msgstr "Ш­Щ…Щ„"
+msgid "Choose file"
+msgstr "Ш§Ш­ШЄЩЉШ§Ш± Щ…Щ„ЩЃ"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Unmount"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"ШЄШ­Ш°ЩЉШ±! ШЄЩ… ШҐЩЉШ¬Ш§ШЇ ШҐШ№ШЇШ§ШЇ Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ Щ…Щ€Ш¬Щ€ШЇ Щ…ШіШЁЩ‚Ш§. Ш±ШЁЩ…Ш§ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШµЩ„Ш§Ш­ ЩЉШЇЩ€ЩЉ ШЁШ№ШЇ "
+"Ш§Щ„ШЄШ«ШЁЩЉШЄ."
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New"
-msgstr "Ш¬ШЇЩЉШЇ"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Printing/Photo Card Access on \"%s\""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr ""
-"WebDAV Щ‡Щ€ ШЁШ±ШЄЩ€ЩѓЩ€Щ„ ЩЉШіЩ…Ш¬ Щ„Щѓ ШЁШЄШ­Щ…ЩЉЩ„ ШЇЩ„ЩЉЩ„ ЩЃЩЉ Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ ШЁШґЩѓЩ„\n"
-"Щ…Ш­Щ„ЩЉ, Щ€ Щ…Ш№Ш§Щ…Щ„ШЄЩ‡ ЩѓЩ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Щ…Ш­Щ„ЩЉ (ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ Щ…Ш№ШЇЩ‘\n"
-"ЩѓШ®Ш§ШЇЩ… WebDAV). Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Ш¶Ш§ЩЃШ© Щ†Щ‚Ш§Ш· ШЄШ­Щ…ЩЉЩ„\n"
-"WebDAV, Ш§Ш®ШЄШ± \"Ш¬ШЇЩЉШЇ\"."
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш© ШЈШ№Щ„Ш§Щ‡ ШЈЩ… Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© "
+"Ш§Щ„Щ…Ш­Щ„ЩЉШ©Шџ\n"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use ``%s'' instead"
-msgstr "Ш§ШіШЄШ®ШЇЩ… ``%s'' ШЁШЇЩ„Ш§ Щ…Щ† Ш°Щ„Щѓ"
+msgid "Printer default settings"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Type"
-msgstr "Ш§Щ„Щ†Щ€Ш№"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generic PS2 Wheel Mouse"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Ш§ШіШЄШ®ШЇЩ… ``Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„'' ШЈЩ€Щ„Ш§"
+msgid "Removing old printer \"%s\"..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‚ШЇЩЉЩ…Ш© \"%s\" ..."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Delete"
-msgstr "ШҐЩ„ШєШ§ШЎ"
+msgid "Select a device !"
+msgstr "Ш§Ш®ШЄШ± Ш¬Щ‡Ш§ШІШ§Щ‹!"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Create"
-msgstr "Ш§Щ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш©"
+msgid "Remove selected server"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "ШЈЩ†Щ€Ш§Ш№ ШЈЩ†ШёЩ…Ш© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ:"
+msgid "French Southern Territories"
+msgstr "Щ…Щ†Ш§Ш·Щ‚ Ш¬Щ†Щ€ШЁ ЩЃШ±Щ†ШіШ§"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Empty"
-msgstr "ЩЃШ§Ш±Шє"
+msgid "the vendor name of the processor"
+msgstr "Ш§ШіЩ… Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid "All data on this partition should be backed-up"
+msgstr "ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© ЩЉШ¬ШЁ Ш­ЩЃШёЩ‡Ш§ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Installing package %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Ш¬Щ‡Ш§ШІ Щ€ ШЄЩ‡ЩЉШ¦Ш© HPOJ..."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Ш§Щ„ШЄШЁШЇЩЉЩ„"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "Щ„ЩѓЩЉ ШЄЩ…ШЄЩ„Щѓ ШЄШ¬ШІШ¦Ш§ШЄ ШЈЩѓШ«Ш±, ЩЉШ±Ш¬Щ‰ Ш§Щ„ШєШ§ШЎ ШЄШ¬ШІШ¦Ш© ЩѓЩЉ ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш№Щ…Щ„ ШЄШ¬ШІШ¦Ш© Щ…Щ…ШЄШЇШ©"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Journalised FS"
-msgstr "Journalised FS"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
+"ШЄЩ… ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© ШўЩ„ЩЉШ§Щ‹ Щ„ЩѓЩЉ ШЄШ№Ш·ЩЉЩѓ Ш§Щ„Щ‚ШЇШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШіЩ€Ш§Щ‚Ш§ШЄ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШµЩ€Ш± "
+"Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ Ш§Щ„ШґШ®ШµЩЉ. ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШµЩ€Ш± ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ "
+"Ш§Щ„Ш±ШіЩ€Щ…ЩЉ \"MToolsFM\" (Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©: \"ШЄШ·ШЁЩЉЩ‚Ш§ШЄ\" -> \"ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ\" -> \"Щ…ШЇЩЉШ± "
+"Щ…Щ„ЩЃШ§ШЄ MTools\") ШЈЩ€ ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЈШЇЩ€Ш§ШЄ \"mtools\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± (ШЈШЇШ®Щ„ \"man "
+"mtools\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ„Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ). ЩЉЩ…ЩѓЩ†Щѓ Ш§ЩЉШ¬Ш§ШЇ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШЁШ·Ш§Щ‚Ш© "
+"ШЄШ­ШЄ Ш­Ш±ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш© \"p:\", ШЈЩ€ Ш­Ш±Щ€ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Ш·Ш§ШЁШ№Ш© "
+"HP Щ…Ш№ ШіЩ€Ш§Щ‚Ш§ШЄ ШЁШ·Ш§Щ‚Ш§ШЄ ШµЩ€Ш±. ЩЃЩЉ \"MToolsFM\" ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ­Щ€ЩЉЩ„ ШЁЩЉЩ† Ш­Ш±Щ€ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш§ШЄ Ш№Щ„Щ‰ "
+"Ш§Щ„Ш­Щ‚Щ„ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„Щ‰ Ш§Щ„ШЈШ№Щ„Щ‰ ЩЃЩЉ Щ‚Щ€Ш§Ш¦Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Choose packages to install"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШіШЄЩЏШ«ШЁЩ‘ЩЋШЄ"
 
-#
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No hard drives found"
-msgstr "Щ†Ш№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШЈЩ‚Ш±Ш§Шµ ШµЩ„ШЁШ©"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
+"\n"
+" ШЁШ№Ш¶ ШЈШ®Ш·Ш§ШЎ sendmail ЩЉЩѓЩ€Щ† ШіШЁШЁЩ‡Ш§ \n"
+" ШЄЩ‡ЩЉШ¦Ш© ШіЩЉШ¦Ш© Щ…Щ† postfix. Щ„Ш­Щ„ Щ‡Ш°Ш§ Ш§Щ„Щ…ШґЩѓЩ„Ш© Ш№Щ„ЩЉЩѓ\n"
+" ШЄШ№ЩЉЩЉЩ† myhostname ШЈЩ€ mydomain ЩЃЩЉ Щ…Щ„ЩЃ /etc/postfix/main.cf\n"
+"\n"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "ЩЃШ¶Щ„Ш§ Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш©"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ€ ШЁЩЉШ§Щ†Ш§ШЄЩ‡Ш§ ШіШЄШ¶ЩЉШ№ Щ…Щ† Ш№Щ„Щ‰ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ ЩЃЩЉ Щ†ШёШ§Щ…Щѓ Щ…ШіШ§Ш­Ш© Щ…ШЄШЁЩ‚Ш© ШЄЩѓЩЃЩЉ Щ„Щ„ШЄШ«ШЁЩЉШЄ ШЈЩ€ Ш§Щ„ШЄШ±Щ‚ЩЉШ© (%d > %d)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
-"Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© Microsofr Windows ЩѓШЁЩЉШ±Ш©.\n"
-"Ш§Щ‚ШЄШ±Ш­ ШЈЩ† ШЄШєЩЉШ± Ш­Ш¬Щ… Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш©\n"
-"(Ш§Ш¶ШєШ· Ш№Щ„ЩЉЩ‡Ш§ Ш«Щ… Ш§Ш®ШЄШ± \"ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…\")"
+"ЩѓЩ„ Ш·Ш§ШЁШ№Ш© ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… (Щ…Ш«Ш§Щ„ \"printer\"). Ш­Щ‚Щ€Щ„ Ш§Щ„Щ€ШµЩЃ Щ€ Ш§Щ„Щ…ЩѓШ§Щ† Щ„ЩЉШі Щ…Щ† "
+"Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉ Щ…Щ„Ш¤Щ‡Ш§. Ш§Щ†Щ‡Ш§ Щ…Ш¬Ш±ШЇ Щ…Щ„Ш§Ш­ШёШ§ШЄ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
+"\"%s\": Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ \"%s\" ШіЩЉЩЃШЄШ­ Щ…Ш№Ш§Щ„Ш¬ ШЄЩ‡ЩЉШ¦Ш©\n"
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Щ‚Ш±ШЈ Ш§Щ„ЩЃШ¶Щ„ Ш§Щ„Щ…Ш®ШЄШµ ЩЃЩЉ ``ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШЁШЄШЇШ¦''\n"
+"Щ„ЩѓШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш№Щ† ЩѓЩЉЩЃЩЉШ© Ш§Ш№ШЇШ§ШЇ Ш·Ш§ШЁШ№Ш© Ш¬ШЇЩЉШЇШ©. Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©\n"
+"Щ‡Щ†Ш§Щѓ Щ…Щ…Ш§Ш«Щ„Ш© Щ„ШЄЩ„Щѓ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Ш© ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose action"
-msgstr "Ш§Ш®ШЄШ± Ш­ШЇШ«"
+msgid "Bhutan"
+msgstr "ШЁЩ€ШЄШ§Щ†"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Wizard"
-msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Network interface"
+msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© "
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… aboot, ЩЃЩ„Ш§ ШЄЩ†ШіЩ‰ ШЈЩ† ШЄШЄШ±Щѓ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© ЩЃЩЉ\n"
-"ШЁШЇШ§ЩЉШ© Ш§Щ„Щ‚Ш±Шµ (2048 Щ‚Ш·Ш§Ш№Ш§ШЄ ЩѓШ§ЩЃЩЉШ©)"
+msgid "Reading printer data..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©..."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Ш±Ш¬Ш§ШЎ Щ‚Щ… ШЁШ№Щ…Щ„ Щ†ШіШ®Ш© Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ© Щ…Щ† ШЁЩЉШ§Щ†Ш§ШЄЩѓ ШЈЩ€Щ„Ш§"
+msgid "Korean keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ЩѓЩ€Ш±ЩЉШ©"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Ш§Щ‚Ш±ШЈ Ш¬ЩЉШЇШ§!"
+msgid "Not connected"
+msgstr "ШєЩЉШ± Щ…ШЄШµЩ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ± (Щ…Ш±Ш© ШЈШ®Ш±Щ‰)"
+msgid "Greek"
+msgstr "Ш§Щ„ЩЉЩ€Щ†Ш§Щ†ЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ±"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The encryption keys do not match"
-msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄШґЩЃЩЉШ± ШєЩЉШ± Щ…ШЄШ·Ш§ШЁЩ‚Ш©"
+msgid "Saint Kitts and Nevis"
+msgstr "ШіШ§Щ†ШЄ ЩѓЩЉШЄШі Щ€ Щ†ЩЉЩЃЩЉШі"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Щ…ЩЃШЄШ§Ш­ Ш§Щ„ШЄШґЩЃЩЉШ± Щ‡Ш°Ш§ ШЁШіЩЉШ· Ш¬ШЇШ§ (ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† %d Ш­Ш±ЩЃШ§ Ш№Щ„Щ‰ Ш§Щ„ШЈЩ‚Щ„)"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
+"ШЄЩ… Ш§Щ„Щ†Щ‚Щ„ ШЁЩ†Ш¬Ш§Ш­\n"
+"Ш±ШЁЩ…Ш§ ШЄШ±ЩЉШЇ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Ш°Ш§ ЩѓШ§Щ† ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… ШЁШ§Щ„ШЈЩ…Ш±:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"ШЇЩ€Щ† ШЄЩ†ШЁЩЉЩ‡Щѓ Ш§Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Ш§Ш®ШЄШ± Щ…ЩЃШЄШ§Ш­ ШЄШґЩЃЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
+msgid "Enable OF Boot?"
+msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ‚Щ„Ш§Ш№ OFШџ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Filesystem encryption key"
-msgstr "Щ…ЩЃШЄШ§Ш­ ШЄШґЩЃЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… JFS Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ ШЈШµШєШ± Щ…Щ† 16 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Type: "
-msgstr "Ш§Щ„Щ†Щ€Ш№: "
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Ш§Щ†Ш№Ш§Шґ Ш§Щ„ШґШ§ШґШ© Ш§Щ„Ш±ШЈШіЩЉ: %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "on channel %d id %d\n"
-msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Щ†Ш§Ш© %d id %d\n"
+msgid "path"
+msgstr "Ш§Щ„Щ…ШіШ§Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Щ†Щ€Ш№ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…: %s\n"
+msgid "Mount point"
+msgstr "Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "ШЈЩ‚Ш±Ш§Шµ LVM %s\n"
+msgid ""
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
+msgstr ""
+"ШёЩ‡Ш± Ш®Ш·ШЈ:\n"
+"%s\n"
+"Ш­Ш§Щ€Щ„ ШЄШєЩЉЩЉШ± ШЁШ№Ш¶ Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Info: "
-msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ: "
+msgid "Restore system"
+msgstr "Ш§ШіШЄШ№ШЇ Ш§Щ„Щ†Щ‘ШёШ§Щ…"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Ш§Щ„Щ‡Щ†ШЇШіШ©: %s Ш§ШіШ·Щ€Ш§Щ†Ш©, %s Ш±ШЈШі, %s Щ‚Ш·Ш§Ш№\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr "ШЄЩ€Ш­ШЇ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…Ш­Щ„ЩЉШ§Щ‹ Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш§:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Ш§Щ„Ш­Ш¬Щ…: %s\n"
+msgid "The DHCP end ip"
+msgstr "DHCP end ip"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Read-only"
-msgstr "Щ„Щ„Щ‚Ш±Ш§ШЎШ© ЩЃЩ‚Ш·"
+msgid "Another one"
+msgstr "ШўШ®Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Device: "
-msgstr "Ш§Щ„Ш¬Щ‡Ш§ШІ: "
+msgid "Drakbackup"
+msgstr "Drakbackup"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"ШЄШ¬ШІШ¦Ш© Ш§Щ„ШҐЩ‚Щ„Ш§Ш№\n"
-"Щ‡Ш°Щ‡ Щ‡ЩЉ\n"
-"Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…ШІШЇЩ€Ш¬ ЩЃЩЉ Щ†ШёШ§Щ…Щѓ.\n"
+msgid "Colombia"
+msgstr "ЩѓЩ€Щ„Щ€Щ…ШЁЩЉШ§"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
+"Current configuration of `%s':\n"
 "\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
+"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ЩЂ`%s':\n"
 "\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Ш§Щ„ШґШЁЩѓШ©: %s\n"
+"Ш№Щ†Щ€Ш§Щ† Ш§Щ„ЩЂIP: %s\n"
+"ШµЩЃШ© Ш§Щ„ЩЂIP: %s\n"
+"Ш§Щ„Щ…ШґШєЩ„: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Ш§ШіЩ… Щ…Щ„ЩЃ Loopback: %s"
+msgid "Plug'n Play"
+msgstr "Plug'n Play"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "ШЈЩ‚Ш±Ш§Шµ RAID %s\n"
+msgid "Reunion"
+msgstr "Ш±ЩЉЩ€Щ†ЩЉЩ€Щ†"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Ш­Ш¬Щ… Chunk %s\n"
+msgid "Details"
+msgstr "ШЄЩЃШ§ШµЩЉЩ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰ %s\n"
+msgid "For security reasons, it will be disconnected now."
+msgstr "Щ„ШЈШіШЁШ§ШЁ ШЈЩ…Щ†ЩЉШ©, ШіЩЉШЄЩ… Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ Ш§Щ„ШўЩ†."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
-msgstr ""
-"Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§Щ‚Щ„Ш§Ш№Щ‡Ш§ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§\n"
-"    (Щ„ЩЂ MS-DOS Щ€ Щ„ЩЉШі Щ„ЩЂ lilo)\n"
+msgid "Synchronization tool"
+msgstr "DrakSync"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Checking your system..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ†ШёШ§Щ…Щѓ..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print"
+msgstr "ШҐШ·ШЁШ№"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
 msgstr ""
-"Щ…Щ„ЩЃ(Ш§ШЄ) Loopback:\n"
-"   %s\n"
+"ШЈШЇШ®Щ„ Ш§Щ„ШґШ±ЩЉШ· ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© %s\n"
+" ЩЃЩЉ Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШ±ЩЉШ· %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Mongolia"
+msgstr "Щ…Щ†ШєЩ€Щ„ЩЉШ§"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Mounted\n"
 msgstr "Щ…Ш­Щ…Щ„\n"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "ШєЩЉШ± Щ…Ш¬Щ‡ШІ\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Formatted\n"
-msgstr "Щ…Ш¬Щ‡ШІ\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Ш§Щ„Ш§ШіШ·Щ€Ш§Щ†Ш© %d Ш§Щ„Щ‰ %d\n"
+msgid "Restore Users"
+msgstr "ШЈШ№ШЇ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† "
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s Щ‚Ш·Ш§Ш№"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Size: %s"
-msgstr "Ш§Щ„Ш­Ш¬Щ…: %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"ЩЉЩ‚Щ€Щ… portmapper ШЁШҐШЇШ§Ш±Ш© Ш§ШЄШµШ§Щ„Ш§ШЄ RPC, Щ€ Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ… Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ Щ…Ш«Щ„ NFS Щ€ NIS. Ш®Ш§ШЇЩ… portmap Щ…Щ† Ш§Щ„Щ„Ш§ШІЩ… ШЈЩ† ЩЉШ№Щ…Щ„ Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ©\n"
+"Ш§Щ„ШЄЩЉ ШЄШ№Щ…Щ„ ЩѓШ®Ш§ШЇЩ…Ш§ШЄ ШЄШіШЄШ®ШЇЩ… Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШіШЄЩЃЩЉШЇ Щ…Щ† ШўЩ„ЩЉШ© Ш№Щ…Щ„ RPC."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "Ш§Щ„ШЁШЇШ§ЩЉШ©: Щ‚Ш·Ш§Ш№ %s\n"
+msgid "Detected hardware"
+msgstr "Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ЩЏЩѓШЄШґЩЃ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Ш§Щ„Ш§ШіЩ…: "
+msgid "Mauritius"
+msgstr "Щ…Щ€Ш±ЩЉШґЩЉЩ€Ші"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Ш­Ш±ЩЃ ШіЩ€Ш§Щ‚Ш© DOS: %s (Щ…Ш¬Ш±ШЇ ШЄШ®Щ…ЩЉЩ†)\n"
+msgid "Myanmar (Burmese)"
+msgstr "Щ…ЩЉШ§Щ†Щ…Ш§Ш± (Ш§Щ„ШЁЩ€Ш±Щ…ЩЉШ©)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "partition %s is now known as %s"
-msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш© %s Щ…Ш№Ш±Щ€ЩЃШ© Ш§Щ„ШўЩ† ШЁШ§Щ„ШҐШіЩ… %s"
+msgid "Enabling swap partition %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ…ЩѓЩЉЩ† ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„ %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Removing %s"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© %s"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr ""
+"Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© FAT Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ ЩѓЩЂ loopback (ШЈЩ€ Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ©)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Copying %s"
-msgstr "Ш¬Ш§Ш±ЩЉ Щ†ШіШ® %s"
+msgid "Armenian (old)"
+msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (Щ‚ШЇЩЉЩ…)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Moving files to the new partition"
-msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ©"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…ШіЩ…Ш§Ш© \"%s\" Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§ ШЄШ­ШЄ %s. \n"
+"Ш§Щ†Щ‚Ш± \"Ш§Щ†Щ‚Щ„\" Щ„Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚Щ‡.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ЩѓШЄШ§ШЁШ© Ш§ШіЩ… Ш¬ШЇЩЉШЇ ШЈЩ€ ШЄШ­Ш·ЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
 msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
 msgstr ""
-"Ш§Щ„ШЇЩ„ЩЉЩ„ %s ЩЉШ­ШЄЩ€ЩЉ Щ…ШіШЁЩ‚Ш§ Ш№Щ„Щ‰ ШЁШ№Ш¶ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ\n"
-"(%s)"
+"Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш­Щ„Щ€Щ„ Щ„Щ…ШґШ§ЩѓЩ„Щѓ ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЁЩЉШ¦Ш© Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩЃЩЉ MandrakeSoft"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hide files"
-msgstr "Ш®ШЁШ¦ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
+msgid ", host \"%s\", port %s"
+msgstr ", Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Move files to the new partition"
-msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©"
+msgid "Monaco"
+msgstr "Щ…Щ€Щ†Ш§ЩѓЩ€"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "ШЁШ№ШЇ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЄЩ‚ШіЩЉЩ… %s, ЩЃШҐЩ† ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© ШіШЄЩЃЩ‚ШЇ"
+msgid "%s formatting of %s failed"
+msgstr "%s ШЄШ¬Щ‡ЩЉШІ %s Щ‚ШЇ ЩЃШґЩ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„ Щ‚ШЁЩ„ ШЈЩ† ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШ№ШЇЩЉЩ„Ш§ШЄ"
+msgid "Partitioning failed: %s"
+msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШЄШ¬ШІШ¦Ш©: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Ш¬ШЇЩ€Щ„ Ш§ШЄШЄЩ‚ШіЩЉЩ… Щ„Щ„Щ‚Ш±Шµ %s ШіЩЉШЄЩ… ЩѓШЄШ§ШЁШЄЩ‡ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ!"
+msgid "Canada (cable)"
+msgstr "ЩѓЩ†ШЇШ© (cable)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Ш§Щ„Ш­ШІЩ…Ш© %s ЩЉШ¬ШЁ ШЈЩ† ШЄЩЏШ«ШЁЩ‘ШЄ. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§Шџ"
+msgid "Upgrade"
+msgstr "ШЄШ±Щ‚ЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "ШЈЩЉ Щ†Щ€Ш№ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш©Шџ"
+msgid "Workstation"
+msgstr "Щ…Ш­Ш·Ш© Ш№Щ…Щ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ЩѓЩ† Ш­Ш°Ш±Ш§: Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Ш®Ш·ЩЉШ±Ш©"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s\n"
+"%d%%"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "Ш­Ш¬Щ… chunk"
+msgid "Kyrgyzstan"
+msgstr "Щ‚ЩЉШ±ШєЩЉШІШіШЄШ§Щ†"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "level"
-msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Щ…Ш№ Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ© Ш§Щ„ШЈШіШ§ШіЩЉШ© (Щ…ЩЃШ¶Щ‘Щ„)"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../services.pm:1
 #, c-format
-msgid "device"
-msgstr "Щ€Ш­ШЇШ©"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron ШЈШЇШ§Ш© Щ„ШЄШґШєЩЉЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± ЩЃЩЉ ШЈЩ€Щ‚Ш§ШЄ Щ…Ш­ШЇШЇШ©."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Various"
-msgstr "Щ…ШЄЩ†Щ€Ш№Ш©"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© Ш¬Ш°Ш±ЩЉШ©.\n"
+"Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶ Ш§Щ†ШґШ¦ ШЄШ¬ШІШ¦Ш© (ШЈЩ€ Ш§Щ†Щ‚Ш± Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Щ…Щ€Ш¬Щ€ШЇШ©).\n"
+"Ш«Щ… Ш§Ш®ШЄШ± ``Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„'' Щ€ Ш§Ш¬Ш№Щ„Щ‡Ш§ `/'"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Mount options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid "Proxy should be http://..."
+msgstr "Ш§Щ„ШЁШ±Щ€ЩѓШіЩЉ ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† http://..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Ш§Щ„Щ…Щ„ЩЃ Щ…Щ€Ш¬Щ€ШЇ Щ…ШіШЁЩ‚Ш§, Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Шџ"
+msgid "South Africa"
+msgstr "Ш¬Щ†Щ€ШЁ ШЈЩЃШ±ЩЉЩ‚ЩЉШ§ "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…Щ„ЩЃ Щ…ШіШЄШ®ШЇЩ… Щ…Щ† loopback ШЈШ®Ш±Щ‰, Ш§Ш®ШЄШ± Щ…Щ„ЩЃШ§ ШўШ®Ш±"
+msgid "Western Sahara"
+msgstr "Ш§Щ„ШµШ­Ш±Ш§ШЎ Ш§Щ„ШєШ±ШЁЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Give a file name"
-msgstr "Ш§Ш№Ш· Ш§ШіЩ… Щ…Щ„ЩЃ"
+msgid "Etherboot Floppy/ISO"
+msgstr "Etherboot Floppy/ISO"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Щ†Щ€Ш№ Щ†ШёШ§Щ… Ш§Щ„Щ…ЩЃШ§ШЄ: "
+msgid "Modify printer configuration"
+msgstr "ШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Size in MB: "
-msgstr "Ш§Щ„Ш­Ш¬Щ… ШЁШ§Щ„ЩЉШєШ§ШЁШ§ЩЉШЄ: "
+msgid "Choose a partition"
+msgstr "ШҐШ®ШЄШ± ШЄШ¬ШІШ¦Ш©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Ш§ШіЩ… Щ…Щ„ЩЃ Loopback: "
+msgid "Edit current rule"
+msgstr "Ш­Ш±Щ‘Ш± Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "%s"
+msgstr "%s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ЩЂloopback"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "Ш§ШіЩ… LVMШџ"
+msgid "Please test the mouse"
+msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Ш®ШЄШЁШ± Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new"
-msgstr "Ш¬ШЇЩЉШЇ"
+msgid "Other Media"
+msgstr "Щ€ШіЩЉШ· ШўШ®Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Ш§Ш®ШЄШ± LVM l,Ш¬Щ€ШЇ Щ„Щ„Ш§Ш¶Ш§ЩЃШ©"
+msgid "Backup system files"
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Ш§Ш®ШЄШ± RAID Щ…Щ€Ш¬Щ€ШЇ Щ„Щ„Ш§Ш¶Ш§ЩЃШ©"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш©..."
+msgid "Sector"
+msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Moving"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Щ†Щ‚Щ„"
+msgid "Qatar"
+msgstr "Щ‚Ш·Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "ШЈЩЉ Щ‚Ш·Ш§Ш№ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Шџ"
+msgid "LDAP Base dn"
+msgstr "LDAP Base dn"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Ш§Щ„Щ‚Ш·Ш§Ш№"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© Щ„ШЈЩ†Щ‡ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ© Щ„ШЄШ«ШЁЩЉШЄЩ‡Ш§"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "ШЈЩЉ Щ‚Ш±Шµ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Шџ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Ш§Щ†ШґШ¦ Щ‚Ш±Шµ ШЄШ«ШЁЩЉШЄ ШўЩ„ЩЉ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Move"
-msgstr "Щ†Щ‚Щ„"
+msgid "Dialing mode"
+msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„ШҐШЄШµШ§Щ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "New size in MB: "
-msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Ш¬ШЇЩЉШЇ ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ: "
+msgid "File sharing"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Ш¬ШЇЩЉШЇ"
+msgid "Clean /tmp at each boot"
+msgstr "Щ‚Щ… ШЁШЄЩ†ШёЩЉЩЃ /tmp Ш№Щ†ШЇ ЩѓЩ„ ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Resize"
-msgstr "ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
+msgid "Malawi"
+msgstr "Щ…Ш§Щ„Ш§Щ€ЩЉ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "ШЁШ№ШЇ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… Ш§Щ„ШЄШ¬ШІШ¦Ш© %s, ЩЃШҐЩ† ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© ШіШЄЩЃЩ‚ШЇ"
+msgid "Please choose your type of mouse."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш©."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© ЩЉШ¬ШЁ Ш­ЩЃШёЩ‡Ш§ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§"
+msgid "class of hardware device"
+msgstr "ЩЃШ¦Ш© Ш¬Щ‡Ш§ШІ Ш§Щ„Ш№ШЄШ§ШЇ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„ШЄЩ‚ШіЩЉЩ… ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
+"Щ‡Ш°Щ‡ Щ‡ЩЉ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Щ€ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш§:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш­ШіШ§ШЁ Ш±Щ€Ш§ШЁШ· Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT"
+msgid "United Kingdom"
+msgstr "Ш§Щ„Щ…Щ…Щ„ЩѓШ© Ш§Щ„Щ…ШЄШ­ШЇШ©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Where do you want to mount %s?"
-msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ %sШџ"
+msgid "running"
+msgstr "ШЄШ№Щ…Щ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Щ„Щ… ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© ШЄШ№ЩЉЩЉЩ† Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ†ШёШ±Ш§ Щ„ШЈЩ† Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© Щ…ШіШЄШ®ШЇЩ…Ш© Щ„ЩЂloop back.\n"
-"Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ЩЂloopback ШЈЩ€Щ„Ш§"
+msgid "default"
+msgstr "Ш§Щ„Щ…Ш±Ш¬Ш№"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ %sШџ"
+msgid "Indonesia"
+msgstr "Ш§Щ†ШЇЩ€Щ†ЩЉШіЩЉШ§"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Щ…Щ„ЩЃ loopback %sШџ"
+msgid "France [SECAM]"
+msgstr "ЩЃШ±Щ†ШіШ§ [ШіЩЉЩѓШ§Щ…]"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШєЩЉЩЉШ± Щ…Щ† ext2 Ш§Щ„Щ‰ ext3"
+msgid "restrict"
+msgstr "ШЄШґШЇЩЉШЇ"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "ШЈЩЉ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ ШЄШ±ЩЉШЇШџ"
+msgid "must have"
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Щ„ШЇЩЉЩѓ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "ШєЩЉШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
+"CUPS Щ„Ш§ ЩЉШЇШ№Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ ШЈШ¬Щ‡ШІШ© Novell Ш§Щ„Ш®Ш§ШЇЩ…Ш© ШЈЩ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ШіЩ„ "
+"Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ‰ ШЈЩ…Ш± Ш­Ш±.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "ШЁШ№ШЇ ШЄШєЩЉЩЉШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s, ЩЃШҐЩ†Щѓ ШіШЄШіШ®Ш± ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
+msgid "Senegal"
+msgstr "Ш§Щ„ШіЩ†ШєШ§Щ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the loopback file?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШІШ§Щ„Ш© Щ…Щ„ЩЃ loopbackШџ"
+msgid "Command line"
+msgstr "ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
 msgstr ""
-"Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©\n"
-"(Щ„ШЈЩ†Щѓ Щ€ШµЩ„ШЄ Ш§Щ„Щ‰ Ш§Щ„Ш№ШЇШЇ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ…Щ† Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ©).\n"
-"ШЈЩ€Щ„Ш§Щ‹ Ш§Ш®Ш°ЩЃ ШЄШ¬ШІШ¦Ш© ШЈШіШ§ШіЩЉШ© Щ€ Щ‚Щ… ШЁШҐЩ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш© Щ…Щ…ШЄШЇШ©."
+"Ш®ЩЉШ§Ш±Ш§ШЄЩ†Ш§ Ш§Щ„ЩѓШ«ЩЉШ± Щ…Щ† Ш­Щ„Щ€Щ„ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§Щ„Ш№Ш±Щ€Ш¶ Ш§Щ„Ш®Ш§ШµШ© Щ€ Ш§Щ„Щ…Щ†ШЄШ¬Ш§ШЄ "
+"Ш§Щ„ШЈШ®Ш±Щ‰Щ‰ Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ Щ…ШЄШ¬Ш±Щ†Ш§ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "Ш§Щ„ШЄЩЃШ¶ЩЉЩ„: "
+msgid "access to administrative files"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШҐШЇШ§Ш±Ш©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start sector: "
-msgstr "Щ‚Ш·Ш§Ш№ Ш§Щ„ШЁШЇШ§ЩЉШ©: "
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
+"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ.\n"
+" Щ„Щ… ЩЉШЄЩ… Ш§Ш±ШіШ§Щ„ ШЄЩ‚Ш±ЩЉШ± Ш§Щ„ШЁШ±ЩЉШЇ.\n"
+" ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ sendmail"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Ш§Щ†ШґШ¦ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Щ„ЩЂloopback"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Modify RAID"
-msgstr "ШЄШ№ШЇЩЉЩ„ RAID"
+msgid "Montserrat"
+msgstr "Щ…Щ€Щ†ШЄШіЩЉШ±Ш§ШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Ш§ШІШ§Щ„Ш© Щ…Щ† LVM"
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Ш§ШІШ§Щ„Ш© Щ…Щ† RAID"
+msgid "Swap"
+msgstr "Ш§Щ„ШЄШЁШЇЩЉЩ„"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Add to LVM"
-msgstr "Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ LVM"
+msgid "Connecting to the Internet "
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to RAID"
-msgstr "Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ RAID"
+msgid "Restore Other"
+msgstr "Ш§ШіШЄШ№ШЇ ШўШ®Ш±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Format"
-msgstr "ШЄЩ†ШіЩЉЩ‚"
+msgid "TV card"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Щ…ЩЃШµЩ‘Щ„Ш©"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows 95/98/NT"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Ш¬Ш§Ш±ЩЉ Щ…Ш­Ш§Щ€Щ„Ш© Ш§Щ†Щ‚Ш§Ш° Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+msgid ", "
+msgstr ", "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
-"ШЈШЇШ®Щ„ Щ‚Ш±ШµШ§ Щ…Ш±Щ†Ш§ ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©\n"
-"ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ ШіШЄЩ…Ш­Щ‰"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "ШЄШ­Ш°ЩЉШ±"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select file"
-msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ"
+msgid "Remove selected host/network"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
 msgstr ""
-"Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ… Ш§Щ„Щ…Ш­ЩЃЩ€Шё Щ„ЩЉШі ШЁЩ†ЩЃШі Ш§Щ„Ш­Ш¬Щ…\n"
-"Щ„Ш§ ШІЩ„ШЄ ШЄШ±ЩЉШЇ Ш§Щ„ШҐЩѓЩ…Ш§Щ„Шџ"
+"Postfix Щ‡Щ€ Ш№Щ…ЩЉЩ„ Щ„Щ†Щ‚Щ„ Ш§Щ„ШЁШ±ЩЉШЇ, ШЈЩЉ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Ш°ЩЉ ЩЉЩ†Щ‚Щ„ Ш§Щ„ШЁШ±ЩЉШЇ Щ…Щ† Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‰ ШўШ®Ш±."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Removable media automounting"
-msgstr "Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШўЩ„ЩЉ Щ„Щ„Щ€ШіШ§Ш¦Ш· Ш§Щ„Щ‚Ш§ШЁЩ„Ш© Щ„Щ„ШҐШІШ§Щ„Ш©"
+msgid "Disconnection from the Internet failed."
+msgstr "ЩЃШґЩ„ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Reload partition table"
-msgstr "ШҐШ№Ш§ШЇШ© ШЄШ­Щ…ЩЉЩ„ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш®ШЄШµШ§Ш±Ш§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄЩЉ \n"
+"ШіШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Щ„ШЄШЁШЇЩЉЩ„ ШЁЩЉЩ† Щ„ШєШ§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…Ш®ШЄЩ„ЩЃШ©\n"
+"(Щ…Ш«Щ„Ш§Щ‹: Щ„Ш§ШЄЩЉЩ†ЩЉ Щ€ ШєЩЉШ± Щ„Ш§ШЄЩЉЩ†ЩЉ)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "ШҐЩ†Щ‚Ш§Ш° Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+msgid "Network Hotplugging"
+msgstr "Network Hotplugging"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Restore partition table"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+msgid "if set to yes, reports check result to tty."
+msgstr "if set to yes, reports check result to tty."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Save partition table"
-msgstr "Ш­ЩЃШё Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
+msgid "Restore From CD"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Щ„ЩѓЩЉ ШЄЩ…ШЄЩ„Щѓ ШЄШ¬ШІШ¦Ш§ШЄ ШЈЩѓШ«Ш±, ЩЉШ±Ш¬Щ‰ Ш§Щ„ШєШ§ШЎ ШЄШ¬ШІШ¦Ш© ЩѓЩЉ ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш№Щ…Щ„ ШЄШ¬ШІШ¦Ш© Щ…Щ…ШЄШЇШ©"
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІЩѓ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ШіЩЉЩ…ЩѓЩ† Щ„Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ† ШЄШіШЄШ®ШЇЩ… Щ€ШµЩ„Ш© "
+"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ„Щ‡Ш°Ш§ Ш§Щ„Ш­Ш§ШіЩ€ШЁ.\n"
+"\n"
+"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… drakconnect Щ‚ШЁЩ„ "
+"Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
+"\n"
+"Щ…Щ„Ш­Щ€ШёШ©: ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Щ€Ш§Ш¦Щ… Щ„Щ„ШґШЁЩѓШ© ЩѓЩЉ ШЄЩ‚Щ€Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© (LAN)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш¶Ш§ЩЃШ© ШЈЩЉ ШЄШ¬ШІШ¦Ш© ШЈШ®Ш±Щ‰"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ© Щ…ШіШЄШ®ШЇЩ…Ш©"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ HP Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Hard drive information"
-msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
+#: ../../share/advertising/09-mdksecure.pl:1
+#, fuzzy, c-format
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
+"MandrakeSoft ШЄШ№Щ…Щ„ Ш¬Щ†ШЁШ§Щ‹ Ш§Щ„Щ‰ Ш¬Щ†ШЁ Щ…Ш№ ШЈЩЃШ¶Щ„ Ш§Щ„ШґШ±ЩѓШ§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ€ЩЃШ± Ш­Щ„Щ€Щ„ Щ„Ш­ШЄШ±Ш§ЩЃЩЉШ© "
+"Щ…ШЄЩ€Ш§ЩЃЩ‚Ш© Щ…Ш№ Mandrake Linux. ШЄЩ€Ш¬ШЇ Щ‚Ш§Ш¦Щ…Ш© ШЁЩ‡Ш¤Щ„Ш§ШЎ Ш§Щ„ШґШ±ЩѓШ§ШЎ ЩЃЩЉ MandrakeStore"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Auto allocate"
-msgstr "ШЄШ­ШЇЩЉШЇ ШўЩ„ЩЉ"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШєЩЉШ± Щ…Щ…ЩѓЩ‘ЩЋЩ†Ш© Ш§Щ„ШўЩ†."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Clear all"
-msgstr "ШЈЩ…ШіШ­ Ш§Щ„ЩѓЩ„"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr "if set to yes, verify checksum of the suid/sgid files."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­ЩЃШё ШЄШ№ШЇЩЉЩ„Ш§ШЄ /etc/fstab"
+msgid "Latin American"
+msgstr "Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ© Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉШ©"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш®Ш±Щ€Ш¬ ШЁШЇЩ€Щ† ЩѓШЄШ§ШЁШ© Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…Шџ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Quit without saving"
-msgstr "Ш§Щ„Ш®Ш±Щ€Ш¬ ШЁШЇЩ€Щ† Ш§Щ„Ш­ЩЃШё"
+msgid "Old device file"
+msgstr "Щ…Щ„ЩЃ Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‚ШЇЩЉЩ…"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш§ЩѓЩ…Ш§Щ„ Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
+msgid "Info: "
+msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Ш§Щ„Щ†ШЄЩ‚Ш§Щ„ Ш§Щ„Щ‰ Щ€Ш¶Ш№ЩЉШ© Ш§Щ„Ш®ШЁЩЉШ±"
+msgid "Button `%s': %s"
+msgstr "Button `%s': %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Ш§Щ„Ш§Щ†ШЄЩ‚Ш§Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ€Ш¶Ш№ Ш§Щ„Ш№Ш§ШЇЩЉ"
+msgid "Please wait"
+msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Щ†ШЄШёШ±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Undo"
-msgstr "ШЄШ±Ш§Ш¬Ш№"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Exit"
-msgstr "Ш®Ш±Щ€Ш¬"
+msgid "None"
+msgstr "Щ€Щ„Ш§ ШґШ¦"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose a partition"
-msgstr "ШҐШ®ШЄШ± ШЄШ¬ШІШ¦Ш©"
+msgid "The entered IP is not correct.\n"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Щ…ШЇЩЏШ®Щ„ ШєЩЉШ± ШµШ­ЩЉШ­.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose another partition"
-msgstr "ШҐШ®ШЄШ± ШґШ§ШґШ©"
+msgid "Ethernet Card"
+msgstr "Ethernet Card"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Change type"
-msgstr "ШєЩЉЩ‘Ш± Ш§Щ„Щ†Щ€Ш№"
+msgid "Info"
+msgstr "Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Search servers"
-msgstr "Ш§ШЁШ­Ш« ЩЃЩЉ ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§ШЇЩ…"
+msgid "Install"
+msgstr "Ш«ШЁЩ‘ШЄ"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Domain"
-msgstr "Ш§Щ„Щ†Ш·Ш§Щ‚"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Ш§Ш¶ШєШ· \"%s\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃ ЩѓЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ\n"
+"Ш§Щ„ШµЩ„ШЁ. Ш®Ш° Ш­Ш°Ш±Щѓ, ШЁШ№ШЇ Щ†Щ‚Ш±Щѓ Щ„ШІШ± \"%s\" Щ„Щ† ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш§ШіШЄШ№Ш§ШЇШ©\n"
+"ШЈЩЉ ШЁЩЉШ§Щ†Ш§ШЄ ШЈЩ€ ШЄШ¬ШІШ¦Ш§ШЄ ЩѓШ§Щ†ШЄ Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ.\n"
+"ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ ШЁЩЉШ§Щ†Ш§ШЄ Windows\n"
+"Ш§Щ†Щ‚Ш± \"%s\" Щ„ШҐЩЉЩ‚Ш§ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© ШЇЩ€Щ† Ш®ШіШ§Ш±Ш© ШЈЩЉ ШЁЩЉШ§Щ†Ш§ШЄ ШЈЩ€ ШЄШ¬ШІШ¦Ш§ШЄ\n"
+"Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Username"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Exit install"
+msgstr "Ш§Щ„Ш®Ш±Щ€Ш¬ Щ…Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ€ Ш§Щ„Щ†Ш·Ш§Щ‚ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ„Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
-"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
+"ШЄЩ… ШҐШ№ШЇШ§ШЇ ЩѓЩ„ ШґШ¦.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Ш№ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЈШ®Ш±Щ‰ ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… "
+"ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉ (DHCP)."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Domain Authentication Required"
-msgstr "Domain Authentication Required"
+msgid "Remote CUPS server"
+msgstr "Ш®Ш§ШЇЩ… CUPS ШЁШ№ЩЉШЇ"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Another one"
-msgstr "ШўШ®Ш±"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which username"
-msgstr "ШЈЩЉ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"ЩЉЩ€Ш¬ШЇ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Щ€Ш§Ш­ШЇ ЩЃЩ‚Ш· Щ…Ш№ШЇЩ‘ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ:\n"
+"\n"
+"%s\n"
+"\n"
+"Щ†Ш­Щ† Ш№Щ„Щ‰ Щ€ШґЩѓ Ш§Ш№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ…Щ€Ш§Ш¦Щ…."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "ШЄШ№Ш°Ш± Ш§Щ„ШЇШ®Щ€Щ„ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… %s (ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± ШіЩЉШ¦Ш©Шџ)"
+msgid "Minimal install"
+msgstr "ШЄШ«ШЁЩЉШЄ Щ…ШµШєЩ‘Ш±"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "cpu # "
-msgstr "cpu # "
+msgid "Ethiopia"
+msgstr "Ш§Ш«ЩЉЩ€ШЁЩЉШ§"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ SMBus"
+msgid "Devanagari"
+msgstr "ШЇЩЉЩЃШ§Щ†ШєШ§Ш±ЩЉ"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "USB controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ USB"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
+"- ШЈШ¬Щ‡ШІШ© pci: ШЄШ№Ш·ЩЉ Щ…Щ†ЩЃШ° PCI, Ш§Щ„Ш¬Щ‡Ш§ШІ Щ€ Щ€ШёЩЉЩЃШ© Щ‡Ш°Щ‡ Ш§Щ„ШЁШ·Ш§Щ‚Ш©\n"
+"- ШЈШ¬Щ‡ШІШ© eide: Ш§Щ„Ш¬Щ‡Ш§ШІ ШҐЩ…Ш§ ШЈЩ† ЩЉЩѓЩ€Щ† Ш¬Щ‡Ш§ШІ slave ШЈЩ€ master\n"
+"- ШЈШ¬Щ‡ШІШ© scsi: scsi bus Щ€ Щ‡Щ€ЩЉШ© Ш¬Щ‡Ш§ШІ scsi"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ SCSI"
+msgid "Total size: %d / %d MB"
+msgstr "Ш§Щ„Ш­Ш¬Щ… Ш§Щ„ШҐШ¬Щ…Ш§Щ„ЩЉ: %d / %d Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Firewire controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ Firewire"
+msgid "disabled"
+msgstr "Щ…Ш№Ш·Щ„"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ (E)IDE/ATA"
+msgid "Search for new scanners"
+msgstr "Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Ш¬ШЇЩЉШЇШ©..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Joystick"
-msgstr "Ш№ШµШ§ Ш§Щ„ШЈЩ„Ш№Ш§ШЁ"
+msgid "Disabling servers..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ№Ш·ЩЉЩ„ Ш§Щ„Ш®Щ€Ш§ШЇЩ…..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Scanner"
-msgstr "Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr ""
+"ЩЃШ¶Щ„Ш§ Ш§Ш®ШЄШ± Ш§Щ„ЩЃШЄШ±Ш© \n"
+"Щ…Ш§ ШЁЩЉЩ† ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Unknown/Others"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ/ШЈШ®Ш±Щ‰"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ %s. ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ:"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "ШЄШ№Ш°Ш± ШЄШґШєЩЉЩ„ mkinitrd -f /boot/initrd-%s.img %s."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Modem"
-msgstr "Ш§Щ„Щ…Щ€ШЇЩ…"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Щ„Щ‚ШЇ Ш§Ш®ШЄШ±ШЄ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©: %s\n"
+"\n"
+"\n"
+"Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Щ…ЩЃШ№Щ‘Щ„Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹, Щ€ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ„Щ‡Щ… Щ…ШґШ§ЩѓЩ„ ШЈЩ…Щ†ЩЉШ©\n"
+"Щ…Ш№Ш±Щ€ЩЃШ©, Щ€ Щ„ЩѓЩ† Щ‚ШЇ ШЄЩѓШЄШґЩЃ ШЁШ№Ш¶ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Ш§Щ„Ш¬ШЇЩЉШЇШ©. ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш©, ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†\n"
+"ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ±Щ‚ЩЉШ© ЩЃЩЉ ШЈЩ‚Ш±ШЁ Щ€Щ‚ШЄ Щ…Щ…ЩѓЩ†.\n"
+"\n"
+"\n"
+"Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШўЩ†Шџ\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Ethernetcard"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§ЩЉШ«Ш±Щ†ШЄ"
+msgid "Network printer (TCP/Socket)"
+msgstr "Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© (TCP/Socket)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Processors"
-msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ"
+msgid "Backup User files..."
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†..."
 
-#: ../../harddrake/data.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Webcam"
-msgstr "ЩѓШ§Щ…ЩЉШ±Ш§ШЄ Ш§Щ„Щ€ЩЉШЁ"
+msgid "Install system"
+msgstr "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../harddrake/data.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Soundcard"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
+msgid "First DNS Server (optional)"
+msgstr "Ш®Ш§ШЇЩ… DNS Ш§Щ„ШЈЩ€Щ„ (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Other MultiMedia devices"
-msgstr "ШЈШ¬Щ‡ШІ Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ© ШЈШ®Ш±Щ‰"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr "ШЁШЇЩ„Ш§Щ‹ Щ…Щ† Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Ш§ Ш§Щ„ШҐШЇШ®Ш§Щ„"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Tvcard"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
+msgid "dhcpd Config..."
+msgstr "ШЄЩ‡ЩЉШ¦Ш© dhcpd..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Videocard"
-msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄЩ†ШµЩЉШЁ, Щ€ Щ„ЩѓЩ†Щ‡ ШєЩЉШ± Щ…Щ…ЩѓЩ‘ЩЋЩ† Ш§Щ„ШўЩ†"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Tape"
-msgstr "ШґШ±ЩЉШ· Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ"
+msgid "LILO/grub Installation"
+msgstr "ШЄШ«ШЁЩЉШЄ LILO/grub"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Israeli"
+msgstr "Ш§Щ„Ш№ШЁШ±ЩЉШ©"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr "ШЈШ¬Щ‡ШІШ© Щ†ШіШ® CD/DVD"
+msgid "load setting"
+msgstr "Ш­Щ…Щ„ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CDROM"
-msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ… \"%s\""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Disk"
-msgstr "Ш§Щ„Щ‚Ш±Шµ"
+msgid "Floppy can be removed now"
+msgstr "ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„ШўЩ†"
 
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Zip"
-msgstr "Zip"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "ШЄШ«ШЁЩЉШЄ Щ…ШµШєЩ‘Ш±"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Floppy"
-msgstr "Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†"
+msgid "Denmark"
+msgstr "Ш§Щ„ШЇЩ†Щ…Ш§Ш±Щѓ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Let me pick any driver"
-msgstr "Ш§ШіЩ…Ш­ Щ„ЩЉ ШЈЩ† ШЈШ®ШЄШ§Ш± Щ…ШґШєЩ„"
+msgid "Moving partition..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш©..."
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Driver:"
-msgstr "Ш§Щ„Щ…ШґШєЩ„:"
+msgid "(This) DHCP Server IP"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Ш®Ш§ШЇЩ… DHCP (Щ‡Ш°Ш§)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ№ШЄЩ‚ШЇ ЩЃШ№Щ„Ш§Щ‹ ШЈЩ†Щѓ ШЄШ№Ш±ЩЃ Щ…Ш§ Щ‡Щ€ Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„ШµШ­ЩЉШ­ Щ„ШЁШ·Ш§Щ‚ШЄЩѓ\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±Щ‡ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШ№Щ„Ш§Щ‡.\n"
-"\n"
-"Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ \"%s\" Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ Щ‡Щ€ \"%s\" "
+msgid "Test of the configuration"
+msgstr "Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„ШҐШ№ШЇШ§ШЇ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„ Ш№Ш§Щ…"
+msgid "Installing %s ..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ %s ..."
 
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Sound trouble shooting"
-msgstr "Ш­Щ„ Щ…ШґШ§ЩѓЩ„ Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Ш®Ш·ШЈ: Щ…ШґШєЩ„ \"%s\" Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
+msgid "Choose your filesystem encryption key"
+msgstr "Ш§Ш®ШЄШ± Щ…ЩЃШЄШ§Ш­ ШЄШґЩЃЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unkown driver"
-msgstr "Щ…ШґШєЩ„ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш¬Щ‡Ш§ШІ CD/DVD Ш§Щ„Ш®Ш§Шµ ШЁЩѓ\n"
+"(Ш§Ш¶ШєШ· Ш§ШЇШ®Ш§Щ„ Щ„Щ†ШґШ± Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ Щ„Ш­Щ‚Щ€Щ„ ШЈШ®Ш±Щ‰.\n"
+"Щ‡Ш°Ш§ Ш§Щ„Ш­Щ‚Щ„ Щ„ЩЉШі Ш¶Ш±Щ€Ш±ЩЉШ§Щ‹, Ш§Щ†Щ‡ Щ…Ш¬Ш±ШЇ ШЈШЇШ§Ш© Щ„Щ…Щ„ШЎ Ш§Щ„ШҐШіШЄЩ…Ш§Ш±Ш©.)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…Ш№Ш±Щ€ЩЃ Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s)"
+msgid "Andorra"
+msgstr "ШЈЩ†ШЇЩ€Ш±Ш§"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No known driver"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…Ш№Ш±Щ€ЩЃ"
+msgid "Sierra Leone"
+msgstr "ШіЩЉШ±Ш§Щ„ЩЉЩ€Щ†"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
-msgstr ""
-"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…ЩЃШЄЩ€Ш­ Ш§Щ„Щ…ШµШЇШ± Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s), Щ„ЩѓЩ† Щ‡Щ†Ш§Щѓ Щ…ШґШєЩ„ ШЄШ¬Ш§Ш±ЩЉ ЩЃЩЉ \"%s\"."
+msgid "Botswana"
+msgstr "ШЁЩ€ШЄШіЩ€Ш§Щ†Ш§"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "No open source driver"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…ЩЃШЄЩ€Ш­ Ш§Щ„Щ…ШµШЇШ±"
+msgid "(default value: %s)"
+msgstr "(Ш§Щ„Щ‚ЩЉЩ…Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©: %s)"
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "ЩЉШ±Ш¬Щ‰ Ш§Щ„ШҐЩ†ШЄШёШ§Ш±... Ш¬Ш§Ш±ЩЉ ШЄШ·ШЁЩЉЩ‚ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
+msgid "Alternative test page (Letter)"
+msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© ШЁШЇЩЉЩ„Ш© (Letter)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"DHCP Server Configuration.\n"
 "\n"
-"It has been reported to oops the kernel on unloading.\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
 "\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
-"Щ…ШґШєЩ„ \"%s\" Ш§Щ„Щ‚ШЇЩЉЩ… Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШіЩ€ШЇШ§ШЎ.\n"
+"ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
 "\n"
-"ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„Ш­Ш§Щ„Ш§ШЄ Щ‚ЩЉЩ„ ШЈЩ†Щ‡ ЩЉШіШЁШЁ Ш§Щ†Щ‡ЩЉШ§Ш± ЩЃЩЉ Ш§Щ„Щ†Щ€Ш§Ш© Ш№Щ†ШЇ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„.\n"
+"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш®ЩЉШ§Ш±Ш§ШЄ Щ…Ш®ШЄЩ„ЩЃШ© Щ„ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ†Щ‡Щ„Щ… Щ…Ш§Ш°Ш§ ЩЉШ№Щ†ЩЉ Ш§Щ„Ш®ЩЉШ§Ш± ЩЃЩѓЩ„ Щ…Ш§ Ш№Щ„ЩЉЩѓ Щ‡Щ€ ШЄШ±ЩѓЩ‡ ЩѓЩ…Ш§ Щ‡Щ€.\n"
 "\n"
-"Щ…ШґШєЩ„ \"%s\" Ш§Щ„Ш¬ШЇЩЉШЇ ШіЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Ш№Щ†ШЇ ШЄШґШєЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§Щ„Щ‚Ш§ШЇЩ…Ш©."
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Trouble shooting"
-msgstr "Ш­Щ„ Ш§Щ„Щ…ШґШ§ЩѓЩ„"
+msgid "Choose an X server"
+msgstr "ШҐШ®ШЄШ± Ш®Ш§ШЇЩ… X"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "Swap partition size in MB: "
+msgstr "Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„ ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Other (not drakbackup)\n"
+"keys in place already"
 msgstr ""
-"\n"
-"\n"
-"ШЁШ·Ш§Щ‚ШЄЩѓ ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ…ШґШєЩ„ %s\"%s\" Ш­Ш§Щ„ЩЉШ§Щ‹ (Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Щ‡Щ€ \"%s\")"
+"Щ…ЩЃШ§ШЄЩЉШ­ ШЈШ®Ш±Щ‰\n"
+"(ШєЩЉШ± drakbackup) Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr "ЩЉЩ…ЩѓЩ†Щѓ Щ‡Щ†Ш§ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„ ШЁШЇЩЉЩ„ (ALSA ШЈЩ€ OSS) Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s)."
+msgid "No changes to backup!"
+msgstr "Щ„Ш§ ШЄШєЩЉЩЉШ±Ш§Щ† Щ„Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©!"
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sound configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШµЩ€ШЄ"
+msgid "Formatted\n"
+msgstr "Щ…Ш¬Щ‡ШІ\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ ШЁШЇЩЉЩ„ (ALSA ШЈЩ€ OSS) Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s) Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ… \"%s\""
+msgid "Type of install"
+msgstr "Щ†Щ€Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No alternative driver"
-msgstr "Щ„Ш§ Щ…ШґШєЩ„ ШЁШЇЩЉЩ„"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "enable radio support"
-msgstr "ШЄЩ…ЩѓЩЉЩ† ШЇШ№Щ… Ш§Щ„Ш±Ш§ШЇЩЉЩ€"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
+"\n"
+"- Daemon (%s) include :\n"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Radio support:"
-msgstr "ШЇШ№Щ… Ш§Щ„Ш±Ш§ШЇЩЉЩ€:"
+msgid "%d comma separated numbers"
+msgstr "%d ШЈШ±Щ‚Ш§Щ… Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "PLL setting:"
-msgstr "Ш§Ш№ШЇШ§ШЇ PLL:"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rusers ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЈЩ† ЩЉШЄШ№Ш±ЩЃЩ€Ш§ Ш№Щ„Щ‰ Щ…Щ†\n"
+"ШіШ¬Щ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Щ…ШіШЄШ¬ЩЉШЁШ© Ш§Щ„ШЈШ®Ш±Щ‰."
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr "number of capture buffers for mmap'ed capture"
+msgid "Automatic Steps Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ© Щ„Щ„Ш®Ш·Щ€Ш§ШЄ"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Number of capture buffers:"
-msgstr "Number of capture buffers:"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Щ…Ш№Ш±ЩЃШ© Ш§Щ„Щ…ШІЩЉШЇ Ш№Щ† Щ…Ш¬ШЄЩ…Ш№ Ш§Щ„Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ЩЃШЄЩ€Ш­Ш©Шџ ЩѓЩ† Ш¬ШІШЎШ§Щ‹ Щ…Щ† Ш№Ш§Щ„Щ… Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ "
+"Ш§Щ„Ш­Ш±Ш©"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tuner type:"
-msgstr "Щ†Щ€Ш№ Ш§Щ„ШЄЩ€Щ†Ш±:"
+msgid "Barbados"
+msgstr "ШЁШ§Ш±ШЁШ§ШЇЩ€Ші"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Card model:"
-msgstr "Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш©"
+msgid "Please select data to backup..."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Щ†ШіШ®Щ‡Ш§ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§..."
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
-"Щ„ШЈШєЩ„ШЁ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ Ш§Щ„Ш­ШЇЩЉШ«Ш©, Щ€Ш­ШЇШ© bttv Щ„Щ†Щ€Ш§Ш© Щ„ЩЉЩ†ЩѓШі ЩЉЩ…ЩѓЩ†Щ‡Ш§ Ш§Щ„ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† "
-"Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ Ш§Щ„ШµШ­ЩЉШ­Ш©.\n"
-"Ш§Ш°Ш§ ШЄЩ… Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„ШЁШ·Ш§Щ‚Ш© ШЁШґЩѓЩ„ Ш®Ш§Ш·Ш¦, ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЇШ®Ш§Щ„ Ш§Щ„ШЄЩ€Щ†Ш± Щ€ Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµШ­ЩЉШ­ "
-"Щ‡Щ†Ш§. ЩЃЩ‚Ш· Ш§Ш®ШЄШ± Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©."
+"ЩЃШґЩ„ Ш§Щ„ШҐШЄШµШ§Щ„.\n"
+"ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Щ€ШµЩ„Ш© ЩЃЩЉ Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake."
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Unknown|Generic"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|Ш№Ш§Щ…"
+msgid "received"
+msgstr "Щ…ЩЏШіШЄЩ‚ШЁЩ„Ш©"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|CPH06X (bt878) [Щ…ШµЩ†Ш№Щ€Щ† ЩѓШ«ЩЉШ±Щ€Щ†]"
+msgid "/File/_New"
+msgstr "/Щ…Щ„ЩЃ/_Ш¬ШЇЩЉШЇ"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|CPH05X (bt878) [Щ…ШµЩ†Ш№Щ€Щ† ЩѓШ«ЩЉШ±Щ€Щ†]"
+msgid "The DNS Server IP"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Ш®Ш§ШЇЩ… DNS"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect"
-msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
+msgid "IP Range End:"
+msgstr "IP Range End:"
 
-#: ../../interactive/newt.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Do"
-msgstr "Ш§ЩЃШ№Щ„"
+msgid "High"
+msgstr "Щ…Ш±ШЄЩЃШ№"
 
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ш§Ш®ШЄЩЉШ§Ш±Щѓ  ? (default %s) "
+msgid "NoVideo"
+msgstr "Щ„Ш§ ЩЃЩЉШЇЩЉЩ€"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± ШіЩЉШ¦, Ш­Ш§Щ€Щ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰\n"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Ш­Щ‚Щ„ ЩЉШµЩЃ Ш§Щ„Ш¬Щ‡Ш§ШІ"
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Re-submit"
-msgstr "ШҐШ№Ш§ШЇШ© ШЄШіЩ„ЩЉЩ…"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP"
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
-"=> Notice, a label changed:\n"
-"%s"
+msgid "Local Printers"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Installation image directory"
+msgstr "ШЇЩ„ЩЉЩ„ ШµЩ€Ш±Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> There are many things to choose from (%s).\n"
+msgid "NIS Server"
+msgstr "Ш®Ш§ШЇЩ… NIS"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Your choice? (default `%s'%s) "
+msgid "Port: %s"
+msgstr "Ш§Щ„Щ…Щ†ЩЃШ°: %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid " enter `void' for void entry"
-msgstr " enter `void' for void entry"
+msgid "Spain"
+msgstr "ШЈШіШЁШ§Щ†ЩЉШ§"
 
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Do you want to click on this button?"
-msgstr "Do you want to click on this button?"
+msgid "This user name has already been added"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ…ЩЏШ¶Ш§ЩЃ Щ…ШіШЁЩ‚Ш§"
 
-#: ../../interactive/stdio.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Button `%s': %s"
-msgstr "Button `%s': %s"
+msgid "Choose a file"
+msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Your choice? (0/1, default `%s') "
+msgid "Apply"
+msgstr "ШЄШ·ШЁЩЉЩ‚"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "Auto-detect available ports"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"ЩЃШґЩ„ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Щ€Ш­ШЇШ© %s.\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…Ш­Ш§Щ€Щ„Ш© Ш«Ш§Щ†ЩЉШ© ШЁЩ…Ш№Ш§Щ…Щ„Ш§ШЄ ШЈШ®Ш±Щ‰Шџ"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Specify options"
-msgstr "Ш­ШЇШЇ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ"
+msgid "San Marino"
+msgstr "ШіШ§Щ† Щ…Ш§Ш±ЩЉЩ†Щ€"
 
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
+msgid "Belgium"
+msgstr "ШЁЩ„Ш¬ЩЉЩѓШ§"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ† ЩЉШ­ШЄШ§Ш¬ Щ…ШґШєЩ„ %s Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Ш¶Ш§ЩЃЩЉШ© Щ„ЩѓЩЉ ЩЉШ№Щ…Щ„\n"
-"ШЁШґЩѓЩ„ ШµШ­ЩЉШ­, Ш§Щ„Ш§ ШЈЩ†Щ‡ ЩЉЩ…ЩѓЩ†Щ‡ Ш§Щ„Ш№Щ…Щ„ Ш¬ЩЉШЇШ§ ШЁШЇЩ€Щ†Щ‡Ш§. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ­ШЇЩЉШЇ\n"
-"Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Ш¶Ш§ЩЃЩЉШ© Щ„Щ‡ ШЈЩ€ ШЄШіЩ…Ш­ Щ„Щ„Щ…ШґШєЩ„ ШЁШ§Щ„ШЄШ­Щ‚Щ‚ ЩЃЩЉ Ш¬Щ‡Ш§ШІЩѓ\n"
-"Ш№Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШ­ШЄШ§Ш¬Щ‡Ш§Шџ ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ†, Щ‚ШЇ ЩЉШЄШіШЁШЁ Ш§Щ„ШЄШ­Щ‚Щ‚ ЩЃЩЉ ШЄШ№Щ„ЩЉЩ‚ Ш§Щ„Ш¬Щ‡Ш§ШІ, "
-"Щ„ЩѓЩ†\n"
-"Щ„Ш§ ЩЉШ¬ШЁ ШЈЩ† ЩЉШЄШіШЁШЁ Ш°Щ„Щѓ ЩЃЩЉ ШЈЩЉ Щ…ШґШ§ЩѓЩ„."
+msgid "Kuwait"
+msgstr "Ш§Щ„ЩѓЩ€ЩЉШЄ"
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "ШЈЩЉ Щ…ШґШєЩ„ %s ЩЉШ¬ШЁ ШЈЩ† Ш§ШіШЄШ®ШЇЩ…Щ‡Шџ"
+msgid "Choose the window manager to run:"
+msgstr "Ш§Ш®ШЄШ± Щ…ШЇЩЉШ± Ш§Щ„Щ†Щ€Ш§ЩЃШ° Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡:"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ€Ш­ШЇШ©:"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "sub generation of the cpu"
+msgstr "Ш§Щ„Ш¬ЩЉЩ„ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Щ„Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш·Ш§ШЎ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ„Щ€Ш­ШЇШ© %s.\n"
-"Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ЩЃЩЉ Щ‡ЩЉШ¦Ш© ``name=value name2=value2 ...'' \n"
-"Щ…Ш«Щ„Ш§, ``io=0x300 irq=7''"
+msgid "First Time Wizard"
+msgstr "Щ…Ш№Ш§Щ„Ш¬ First Time"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш·Ш§ШЎ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ„Щ€Ш­ШЇШ© %s.\n"
-"Щ„Ш§Ш­Шё ШЈЩ† ШЈЩЉ Ш№Щ†Щ€Ш§Щ† ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„Щ‡ Щ…ШіШЁЩ€Щ‚Ш§Щ‹ ШЁЩЂ 0x Щ…Ш«Щ„ '0x123'"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(Ш§Щ„Щ€Ш­ШЇШ© %s)"
+"ШёЩ‡Ш± Ш®Ш·ШЈ Щ€ Щ„Ш§ ШЈШ№Ш±ЩЃ ЩѓЩЉЩЃ ШЈШЄШ№Ш§Щ…Щ„ Щ…Ш№Щ‡ ШЁШЈШіЩ„Щ€ШЁ Ш¬ЩЉШЇ.\n"
+"ШЄШ§ШЁШ№ Ш№Щ„Щ‰ Щ…ШіШ¤Щ€Щ„ЩЉШЄЩѓ."
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Щ…ШґШєЩ„ %s Щ„Щ„ШЁШ·Ш§Щ‚Ш© %s"
+msgid "please wait, parsing file: %s"
+msgstr "ЩЉШ±Ш¬Щ‰ Ш§Щ„ШҐЩ†ШЄШёШ§Ш±, Ш¬Ш§Ш±ЩЉ ШЄШ­Щ„ЩЉЩ„ Ш§Щ„Щ…Щ„ЩЃ: %s"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "See hardware info"
-msgstr "Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ"
+msgid "Taiwan"
+msgstr "ШЄШ§ЩЉЩ€Ш§Щ†"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Щ‡Щ„ Щ„ШЇЩЉЩѓ ШЈЩЉ Щ€Ш§Ш¬Щ‡Ш§ШЄ %sШџ"
+msgid "Pakistan"
+msgstr "ШЁШ§ЩѓШіШЄШ§Щ†"
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "Щ‡Щ„ Ш№Щ†ШЇЩѓ Щ€Ш§Ш­ШЇШ© ШЈШ®Ш±Щ‰Шџ"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ %s %s Щ€Ш§Ш¬Щ‡Ш§ШЄ"
+msgid "Permissions"
+msgstr "Ш§Щ„ШЄШµШ§Ш±ЩЉШ­"
 
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "ЩЉЩ…ЩѓЩ†Щѓ ШЄЩ‡ЩЉШ¦Ш© ЩѓЩ„ Щ…Ш№Ш§Щ…Щ„ Щ„Щ„Щ€Ш­ШЇШ© Щ‡Щ†Ш§."
+msgid "Provider name (ex provider.net)"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…Щ€ЩЃШ± (Щ…Ш«Щ„Ш§Щ‹ provider.net)"
 
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "comma separated strings"
-msgstr "Ш­Ш±ЩЃЩЉШ§ШЄ Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
+msgid "Version: %s\n"
+msgstr "Ш§Щ„ШҐШµШЇШ§Ш±: %s\n"
 
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "comma separated numbers"
-msgstr "ШЈШ±Щ‚Ш§Щ… Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Ш§Щ„Щ†ШёШ§Щ… Щ„ШЇЩЉЩѓ Щ‚Щ„ЩЉЩ„ Ш§Щ„Щ…Щ€Ш§Ш±ШЇ. Щ‚ШЇ ШЄЩ‚Ш§ШЁЩ„ ШЁШ№Ш¶ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Щ‚ЩЉ ШЄШ«ШЁЩЉШЄ\n"
+"Mandrake Linux. Ш§Ш°Ш§ Ш­ШЇШ« Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ Щ€Ш¶Ш№ Щ†ШµЩЉ, Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶,\n"
+"Ш§Ш¶ШєШ· `F1' Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬, Щ€ Ш§ЩѓШЄШЁ `text'."
 
-#: ../../modules/parameters.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "%d comma separated strings"
-msgstr "%d Ш­Ш±ЩЃЩЉШ§ШЄ Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
+msgid "Use the Windows partition for loopback"
+msgstr "Ш§ШіШЄШ®ШЇЩ… ШЄШ¬ШІШ¦Ш© Windows ЩѓЩЂ loopback"
 
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "%d comma separated numbers"
-msgstr "%d ШЈШ±Щ‚Ш§Щ… Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
+msgid "Armenian (typewriter)"
+msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (ШўЩ„Ш© ЩѓШ§ШЄШЁШ©)"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "a number"
-msgstr "Ш±Щ‚Щ…"
+msgid "Connection type: "
+msgstr "Щ†Щ€Ш№ Ш§Щ„Ш№Щ„Ш§Щ‚Ш©"
 
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
-msgstr ""
-"ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ alcatel microcode.\n"
-"Щ‚Щ… ШЁШЄЩ†ШІЩЉЩ„Щ‡Ш§ Ш№Щ„Щ‰\n"
-"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
-"Щ€ Ш§Щ†ШіШ® Ш§Щ„Щ…Щ„ЩЃ mgmt.o Ш§Щ„Щ‰ /usr/share/speedtouch"
+msgid "Graphical interface"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©"
 
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
-"Ш§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„ШЈЩѓШ«Ш± ШґЩЉЩ€Ш№Ш§Щ‹ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁЩЂ adsl Щ‡ЩЉ pppoe.\n"
-"ШЁШ№Ш¶ Ш§Щ„ШҐШЄШµШ§Щ„Ш§ШЄ ШЄШіШЄШ®ШЇЩ… pptp, Щ€ Ш§Щ„Щ‚Щ„ЩЉЩ„ ШЄШіШЄШ®ШЇЩ… dhcp.\n"
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ№Щ„Щ…, Ш§Ш®ШЄШ± 'Ш§ШіШЄШ®ШЇЩ… pppoe'"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s Щ…Ш№ ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connect to the Internet"
-msgstr "Щ€ШµЩ‘Щ„ ШҐЩ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
+msgid "India"
+msgstr "Ш§Щ„Щ‡Щ†ШЇ"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (using pppoa) usb"
+msgid "Chad"
+msgstr "ШЄШґШ§ШЇ"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch usb"
+msgid "Slovakia"
+msgstr "ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ§"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "use dhcp"
-msgstr "Ш§ШіШЄШ®ШЇЩ… dhcp"
+msgid "Singapore"
+msgstr "ШіЩ†ШєШ§ЩЃЩ€Ш±Ш©"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "Ш§ШіШЄШ®ШЇЩ… pptp"
+msgid "Cambodia"
+msgstr "ЩѓЩ…ШЁЩ€ШЇЩЉШ§"
 
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "Ш§ШіШЄШ®ШЇЩ… pppoe"
+msgid "Monitor HorizSync: %s\n"
+msgstr "ШЄШІШ§Щ…Щ† Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЈЩЃЩ‚ЩЉ: %s\n"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Other ports"
-msgstr "Щ…Щ†Ш§ЩЃШ° ШЈШ®Ш±Щ‰"
+msgid "Path"
+msgstr "Ш§Щ„Щ…ШіШ§Ш±"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Everything (no firewall)"
-msgstr "ЩѓЩ„ ШґШ¦ (Щ„Ш§ Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ)"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
+"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ ШЈЩЉ ШЈЩ…Ш± Щ‡Щ„Ш§Щ…ЩЉ ЩЉЩ…ЩѓЩ† ШЄШ­Щ€ЩЉЩ„ Щ€ШёЩЉЩЃШ© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„ЩЉЩ‡ ШЁШЇЩ„Ш§Щ‹ Щ…Щ† Ш§Ш±ШіШ§Щ„Щ‡Ш§ "
+"Щ…ШЁШ§ШґШ±Ш©Щ‹ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
-"ШЄЩ… Ш§Ш№Ш·Ш§ШЎ Щ…Щ†ЩЃШ° ШєЩЉШ± ШµШ§Щ„Ш­: %s.\n"
-"Ш§Щ„Щ†ШіЩ‚ Ш§Щ„ШµШ­ЩЉШ­ Щ‡Щ€ \"port/tcp\" ШЈЩ€ \"port/udp\", \n"
-"ЩЃЩЉ Ш­ЩЉЩ† ЩЉЩѓЩ€Щ† Ш§Щ„Щ…Щ†ЩЃШ° (port) ШЁЩЉЩ† 1 Щ€ 65535."
+"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© (%s) Щ„Щ† ЩЉШЄЩ… ШЁШЇШ¤Щ‡ ШЁШґЩѓЩ„ ШўЩ„ЩЉ Ш№Щ†ШЇ ШЁШЇШЎ ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©.\n"
+"\n"
+"Щ…Щ† Ш§Щ„Щ…Щ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Щ‚ШЇ ШЄЩ… ШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЁШЇШЎ Ш§Щ„ШўЩ„ЩЉ ШЁШіШЁШЁ Ш§Щ„ШЄШєЩЉЩЉШ± Ш§Щ„Щ‰ Щ…ШіШЄЩ€Щ‰ ШЈШ№Щ„Щ‰ Щ„ШЈЩ† "
+"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ‚ШЇ ЩЉЩѓЩ€Щ† Щ†Щ‚Ш·Ш© Щ…ШЁШЇШ¦ЩЉШ© Щ„Щ‡Ш¬Щ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШЁШЇШЎ Ш§Щ„ШўЩ„ЩЉ Щ„Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰Шџ"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Printer %s\n"
+"What do you want to modify on this printer?"
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЇШ®Ш§Щ„ Щ…Щ†Ш§ЩЃШ° Щ…ШЄЩ†Щ€Ш№Ш©. \n"
-"ШЈЩ…Ш«Щ„Ш© ШµШ§Щ„Ш­Ш© Щ‡ЩЉ: 139/tcp 139/udp.\n"
-"Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ /etc/services Щ„Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ."
+"Ш§Щ„Ш·Ш§ШЁШ№Ш© %s\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ№ШЇЩЉЩ„ ШЄЩ„Щѓ Ш§Щ„Ш·Ш§ШЁШ№Ш©Шџ"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr "ШЈЩЉ Ш®ШЇЩ…Ш© ШЄШ±ЩЉШЇ Ш§Щ„ШіЩ…Ш§Ш­ Щ„Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЈЩ† ШЄШЄШµЩ„ ШЁЩ‡Ш§Шџ"
+msgid "Add host"
+msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ¶ЩЉЩЃ"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"drakfirewall configurator\n"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
 "\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
-"ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© DrakFirewall\n"
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ№ШЄЩ‚ШЇ ЩЃШ№Щ„Ш§Щ‹ ШЈЩ†Щѓ ШЄШ№Ш±ЩЃ Щ…Ш§ Щ‡Щ€ Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„ШµШ­ЩЉШ­ Щ„ШЁШ·Ш§Щ‚ШЄЩѓ\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±Щ‡ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШ№Щ„Ш§Щ‡.\n"
 "\n"
-"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§ШЄШµШ§Щ„Щѓ ШЁШ§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ…\n"
-"drakconnect Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©."
+"Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ \"%s\" Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ Щ‡Щ€ \"%s\" "
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"drakfirewall configurator\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
-"ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© drakfirewall\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„ШіЩ…Ш§Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁЩ…ШґШ§Ш±ЩѓШ© ШЁШ№Ш¶ Ш§Щ„ШЈШЇЩ„Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Щ…Шџ\n"
+"Ш§Щ„ШіЩ…Ш§Ш­ ШЁШ°Щ„Щѓ ШіЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁШЈЩ† ЩЉЩ†Щ‚Ш±Щ€Ш§ ШІШ± Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© ЩЃЩЉ ЩѓЩ€Щ†ЩѓЩЉЩ€Ш±Ш± Щ€ Щ†Щ€ШЄЩЉЩ„Щ€Ші.\n"
 "\n"
-"Щ‡Ш°Щ‡ Ш§Щ„ШЈШЇШ§Ш© ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄЩ‡ЩЉШ¦Ш© Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ ШґШ®ШµЩЉ Щ„Щ†ШёШ§Щ… Mandrake Linux Щ‡Ш°Ш§.\n"
-"ШҐШ°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш¬ШЇШ§Ш±Ш§ Щ†Ш§Ш±ЩЉШ§ Щ…ШЄШ®ШµШµШ§, Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰\n"
-"ШЄЩ€ШІЩЉШ№Ш© MandrakeSecurity Firewall."
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "No network card"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЁШ·Ш§Щ‚Ш© ШґШЁЩѓШ©"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "POP and IMAP Server"
-msgstr "Ш®Ш§ШЇЩ… POP Щ€ IMAP"
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Mail Server"
-msgstr "Ш®Ш§ШЇЩ… ШЁШ±ЩЉШЇ"
+"\"Щ…Ш®ШµШµ\" ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШ№Щ…Щ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш®Ш§Шµ Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ….\n"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Domain Name Server"
-msgstr "Ш®Ш§ШЇЩ… Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"ЩЃШ¶Щ„Ш§ЩЏ Ш§Ш®ШЄШ± Ш­ЩЃШё ШЈЩ€ ШЄШ­Щ…ЩЉЩ„ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ Щ„Щ„Ш­ШІЩ… Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†.\n"
+"Ш§Щ„Щ†ШіЩ‚ Щ…ШґШ§ШЁЩ‡ Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Ш§Щ„Щ…Ш±Щ†Ш©."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Web Server"
-msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ"
+msgid "China (broadcast)"
+msgstr "Ш§Щ„ШµЩЉЩ† (broadcast)"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf Ш№Щ„Щ‰ ."
+msgid "Use quota for backup files."
+msgstr "Ш§ШіШЄШ®ШЇЩ… quota Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Host name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
+msgid "Configuring printer \"%s\"..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ..."
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Zeroconf Host name"
-msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf"
+msgid "Internet connection"
+msgstr "Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
-"\n"
-"\n"
-"ШЈШЇШ®Щ„ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf ШЁШЇЩ€Щ† ШЈЩЉ Щ†Щ‚Ш§Ш· Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ\n"
-"Ш§ШіШЄШ®ШЇШ§Щ… Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ."
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ©"
-
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ."
+"ЩЃШґЩ„ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Щ€Ш­ШЇШ© %s.\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…Ш­Ш§Щ€Щ„Ш© Ш«Ш§Щ†ЩЉШ© ШЁЩ…Ш№Ш§Щ…Щ„Ш§ШЄ ШЈШ®Ш±Щ‰Шџ"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Ш§Ш®ШЄШ± Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ©"
+msgid "Welcome to the Open Source world."
+msgstr "ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓ ЩЃЩЉ Ш№Ш§Щ„Щ… Ш§Щ„Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ЩЃШЄЩ€Ш­Ш©"
 
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
-msgstr ""
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЈЩЉ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Ш§ЩЉШ«Ш±Щ†ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ.\n"
-"Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш№ШЇШ§ШЇ Щ†Щ€Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ Щ‡Ш°Ш§."
+msgid "Bosnia and Herzegovina"
+msgstr "Ш§Щ„ШЁЩ€ШіЩ†Ш© Щ€ Ш§Щ„Щ‡Ш±ШіЩѓ"
 
-#: ../../network/ethernet.pm:1
+#: ../../fsedit.pm:1
 #, c-format
 msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
-"ШЈЩЉ Ш№Щ…ЩЉЩ„ DHCP ШЄШ±ЩЉШЇ ШЈЩ† ШЄШіШЄШ®ШЇЩ…Шџ\n"
-"Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ dhcp-client."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш§ШЄ ISDN PCI. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ€Ш§Ш­ШЇШ© ЩЃЩЉ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©."
+"ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Ш­Щ‚ЩЉЩ‚ЩЉ (ext2/ext3, resierfs, xfs, ШЈЩ€ jfs) Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ "
+"Щ‡Ш°Щ‡\n"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш© ISDN PCI, Щ„ЩѓЩ† Щ„Щ… ЩЉШЄЩ… Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Щ†Щ€Ш№Щ‡Ш§. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± ШЁШ·Ш§Щ‚Ш© PCI "
-"ЩЃЩЉ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©."
+msgid "You must enter a host name or an IP address.\n"
+msgstr "ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP.\n"
 
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "ШЈЩЉ Щ…Щ† Ш§Щ„ШўШЄЩЉ Щ‡ЩЉ ШЁШ·Ш§Щ‚Ш© ISDN Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓШџ"
+msgid "Netherlands"
+msgstr "Щ‡Щ€Щ„Щ†ШЇШ§"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© ISDN"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ..."
 
 #: ../../network/isdn.pm:1
 #, c-format
-msgid "Abort"
-msgstr "ШҐЩ†Щ‡Ш§ШЎ"
+msgid "Internal ISDN card"
+msgstr "ШЁШ·Ш§Щ‚Ш© ISDN ШЇШ§Ш®Щ„ЩЉШ©"
 
-#: ../../network/isdn.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Continue"
-msgstr "ШЄШ§ШЁШ№"
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ ШЁШЇЩЉЩ„ (ALSA ШЈЩ€ OSS) Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s) Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ… \"%s\""
 
-#: ../../network/isdn.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ISA, ЩЃШҐЩ† Ш§Щ„Щ‚ЩЉЩ… Ш§Щ„ШЄЩЉ ШіШЄШ№Ш±Ш¶ Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ© ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† "
-"ШµШ­ЩЉШ­Ш©.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© PCMCIA, ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШ№Ш±ЩЃ Щ‚ЩЉЩ… \"irq\" Щ€ \"io\" Ш§Щ„Ш®Ш§ШµШ© "
-"ШЁШЁШ·Ш§Щ‚ШЄЩѓ.\n"
+msgid "Title"
+msgstr "Ш§Щ„Ш№Щ†Щ€Ш§Щ†"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "I don't know"
-msgstr "Щ„Ш§ ШЈШ№Ш±ЩЃ "
+msgid "Install & convert Fonts"
+msgstr "Ш«ШЁЩ‘ШЄ Щ€ Ш­Щ€Щ‘Щ„ Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "WARNING"
+msgstr "WARNING"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Installing bootloader"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉЩ† Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш© Щ„ШЇЩЉЩѓШџ"
+msgid "replay"
+msgstr "Ш§Ш№Ш§ШЇШ©"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© \"%s\" Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§Шџ"
+msgid "detected %s"
+msgstr "ШЄЩ… Ш§ЩѓШЄШіШ§ЩЃ %s"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Щ…Ш§ Щ‡Щ€ Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Шџ"
+msgid "Virgin Islands (U.S.)"
+msgstr "Ш§Щ„Ш¬ШІШ± Ш§Щ„Ш№Ш°Ш±Ш§ШЎ (Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄШ­ШЇШ©)"
 
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Щ„ШЁЩ‚ЩЉШ© Ш§Щ„Ш№Ш§Щ„Щ…"
+msgid "Bad backup file"
+msgstr "Щ…Щ„ЩЃ Щ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ ШіЩЉШ¦"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Щ„ШЁЩ‚ЩЉШ© Ш§Щ„Ш№Ш§Щ„Щ…\n"
-"Щ„Ш§ D-Channel (Ш®Ш·Щ€Ш· Щ…Ш¤Ш¬Ш±Ш©)"
+"ШЄЩ… ШЄЩ†ШµЩЉШЁ Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+"Щ€ Щ‡ЩЉ Щ…Ш№Ш·Щ„Ш© Ш­Ш§Щ„ЩЉШ§Щ‹.\n"
+"\n"
+"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "European protocol"
-msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШЈЩ€Ш±Щ€ШЁЩЉ"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr "ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† IP Щ€ Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш§ШЄЩ‡."
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШЈЩ€Ш±Щ€ШЁЩЉ (EDSS1)"
+msgid "Pipe into command"
+msgstr "Ш­Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШЈЩ…Ш±"
 
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
 msgstr ""
-"Ш§Ш®ШЄШ± Щ…Щ€ЩЃШ± Ш§Щ„Ш®ШЇЩ…Ш© Ш§Щ„Ш®Ш§Шµ ШЁЩѓ.\n"
-"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Щ…Щ€Ш¬Щ€ШЇШ§Щ‹ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©, Ш§Ш®ШЄШ± ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Щ…Щ€ШЇЩ… ISDN Ш®Ш§Ш±Ш¬ЩЉ"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "ШЁШ·Ш§Щ‚Ш© ISDN ШЇШ§Ш®Щ„ЩЉШ©"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Щ€ШµЩ„Ш© ISDN Щ„ШЇЩЉЩѓШџ"
+"ШЁШ№Ш¶ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШґШєЩ„Ш§ШЄ ``ШЄШ¬Ш§Ш±ЩЉШ©'' ЩѓЩЉ ШЄШ№Щ…Щ„.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§ЩЉШ¬Ш§ШЇ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш№Щ†Щ‡Ш§ ЩЃЩЉ: %s"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Щ…Ш№Ш§Щ„Ш¬ ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Detecting devices..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЈШ¬Щ‡ШІШ©..."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "ШҐШ№ШЇШ§ШЇ Щ‚ШЇЩЉЩ… (isdn4net)"
+msgid "Click here to launch the wizard ->"
+msgstr "Ш§Щ†Щ‚Ш± Щ‡Щ†Ш§ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ->"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "New configuration (isdn-light)"
-msgstr "ШҐШ№ШЇШ§ШЇ Ш¬ШЇЩЉШЇ (isdn-light)"
+msgid "Haiti"
+msgstr "Щ‡Ш§ЩЉШЄЩЉ"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
+"Description of the fields:\n"
 "\n"
-"We recommand the light configuration.\n"
 msgstr ""
-"Щ…Ш§ Щ‡ЩЉ ШЄЩ‡ЩЉШ¦Ш© ISDN Ш§Щ„ШЄЩЉ ШЄЩЃШ¶Щ„Щ‡Ш§Шџ\n"
-"\n"
-"* Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ‚ШЇЩЉЩ…Ш© ШЄШіШЄШ®ШЇЩ… isdn4net. Щ€ Щ‡ЩЉ ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ\n"
-"  Щ‚Щ€ЩЉШ© Щ€ Щ„ЩѓЩ†Щ‡Ш§ ШµШ№ШЁШ© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, Щ€ ШєЩЉШ± Щ‚ЩЉШ§ШіЩЉШ©.\n"
-"\n"
-"* Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ© ШЈШіЩ‡Щ„ ЩЃЩЉ Ш§Щ„ЩЃЩ‡Щ…, Щ€ ШЈЩѓШ«Ш±\n"
-"  Щ‚ЩЉШ§ШіЩЉШ©, Щ€ Щ„ЩѓЩ† Щ…Ш№ ШЈШЇЩ€Ш§ШЄ ШЈЩ‚Щ„.\n"
+"Щ€ШµЩЃ Ш§Щ„Ш­Щ‚Щ€Щ„:\n"
 "\n"
-"Щ†Ш­Щ† Щ†ЩЃШ¶Щ‘Щ„ Щ„Щѓ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ЩЃЩЉЩЃШ©.\n"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Do nothing"
-msgstr "Щ„Ш§ ШЄЩЃШ№Щ„ ШґЩЉШ¦Ш§Щ‹"
+msgid "the name of the CPU"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Install rpm"
-msgstr "Ш«ШЁШЄ rpm"
+msgid "Refreshing printer data..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШ­Щ…ЩЉЩ„ ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ©..."
 
-#: ../../network/modem.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
-msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ€ЩЉЩ†Щ…Щ€ШЇЩ… \"%s\", Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш·Щ„Щ€ШЁШ© Шџ"
+msgid "You must also format %s"
+msgstr "Ш№Щ„ЩЉЩѓ ШЈЩЉШ¶Ш§ ШЄШ¬Щ‡ЩЉШІ %s"
 
-#: ../../network/modem.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Title"
-msgstr "Ш§Щ„Ш№Щ†Щ€Ш§Щ†"
+msgid "Be careful: this operation is dangerous."
+msgstr "ЩѓЩ† Ш­Ш°Ш±Ш§: Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Ш®Ш·ЩЉШ±Ш©"
 
-#: ../../network/modem.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-"Ш§Щ„Щ…Щ€ШЇЩ… Щ„ШЇЩЉЩѓ ШєЩЉШ± Щ…ШЇШ№Щ€Щ… Щ…Щ† Ш§Щ„Щ†ШёШ§Щ….\n"
-"Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ http://www.linmodems.org"
+msgid "Insert a floppy containing package selection"
+msgstr "ШЈШЇШ®Щ‡Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„Щ…Ш­ШЄЩ€Щ‰ Ш№Щ„Щ‰ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш­ШІЩ…"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Ш®Ш§ШЇЩ… DNS Ш§Щ„Ш«Ш§Щ†ЩЉ (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
+msgid "Server: "
+msgstr "Ш§Щ„Ш®Ш§ШЇЩ…: "
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "First DNS Server (optional)"
-msgstr "Ш®Ш§ШЇЩ… DNS Ш§Щ„ШЈЩ€Щ„ (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
+msgid "Security Alerts:"
+msgstr "ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ ШЈЩ…Щ†ЩЉШ©:"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Domain name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚"
+msgid "Sweden"
+msgstr "Ш§Щ„ШіЩ€ЩЉШЇ"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Use Expect for SSH"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Expect Щ„ЩЂSSH"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Script-based"
-msgstr "Script-based"
+msgid "Poland"
+msgstr "ШЁЩ€Щ„Щ†ШЇШ§"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Terminal-based"
+msgid "Importance: %s\n"
+msgstr "Ш§Щ„ШЈЩ‡Щ…ЩЉШ©: %s\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+# c-format
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Ш®Ш±Ш§Ш¬ Ш§Щ„ШґШ±ЩЉШ· ШЁШ№ШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Login ID"
-msgstr "Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„"
+msgid "Other ports"
+msgstr "Щ…Щ†Ш§ЩЃШ° ШЈШ®Ш±Щ‰"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Ш±Щ‚Щ… Ш§Щ„ШЄЩ‘Щ„ЩЉЩЃЩ€Щ† "
+msgid "number of capture buffers for mmap'ed capture"
+msgstr "number of capture buffers for mmap'ed capture"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Connection name"
-msgstr "Ш§ШіЩ… Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "SMBus controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ SMBus"
 
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Dialup options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "Connection timeout (in sec)"
+msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ„Щ„Ш§ШЄШµШ§Щ„ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШЄШіЩ„ШіЩ„ЩЉ Ш§Щ„Щ…Ш±ШЄШЁШ· ШЁЩ‡ Ш§Щ„Щ…Щ€ШЇЩ… Щ„ШЇЩЉЩѓ."
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Network Configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Croatian"
+msgstr "Ш§Щ„ЩѓШ±Щ€Ш§ШЄЩЉШ©"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
-"ШёЩ‡Ш±ШЄ Щ…ШґШ§ЩѓЩ„ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
-"Ш§Ш®ШЄШЁШ± Ш§Щ„Щ€ШµЩ„Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… net_monitor ШЈЩ€ mcc. Ш§Ш°Ш§ Щ„Щ… ШЄШ№Щ…Щ„ Ш§Щ„Щ€ШµЩ„Ш©, ЩЃЩ‚ШЇ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© "
-"Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©."
+msgid "Unable to contact mirror %s"
+msgstr "ШЄШ№Ш°Ш± Ш§?ШЄШµШ§Щ„ ШЁШ§Щ„Щ…Ш±ШўШ© %s"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"ШЁШ№ШЇ Ш№Щ…Щ„ Ш°Щ„Щѓ, Щ†Щ†ШµШ­ ШЁШҐШ№Ш§ШЇШ© ШЄШґШєЩЉЩ„ ШЁЩЉШ¦Ш© X Щ„ШЇЩЉЩѓ Щ„ШЄЩЃШ§ШЇЩЉ ШЈЩЉ Щ…ШґШ§ЩѓЩ„ ШЄШЄШ№Щ„Щ‚ ШЁШҐШіЩ… "
-"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
+msgid "/Help/_About..."
+msgstr "/Щ…ШіШ§Ш№ШЇШ©/_Ш­Щ€Щ„ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬..."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, Ш§Щ†ШЄЩ‡ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"ШіЩЉШЄЩ… ШЄШ·ШЁЩЉЩ‚ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ Ш§Щ„ШўЩ†.\n"
-"\n"
+msgid "Remove user directories before restore."
+msgstr "Ш§Ш­Ш°ЩЃ ШЈШЇЩ„Ш© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Щ‚ШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
-"ШёЩ‡Ш±ШЄ Щ…ШґЩѓЩ„Ш© ШЈШ«Щ†Ш§ШЎ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©: \n"
-"\n"
-"%s"
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©. Щ‡Ш°Ш§ ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЈЩ† ШЄЩѓЩ€Щ† Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ© ШЄШ№Щ…Щ„ Щ€ Щ„ЩѓЩ† "
+"Ш§Щ„ШґШЁЩѓШ© Щ„Щ… ЩЉШЄЩ… Ш§Ш№ШЇШ§ШЇЩ‡Ш§ Ш­ШЄЩ‰ Ш§Щ„ШўЩ†. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© ШЇЩ€Щ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©, "
+"ШіШЄЩѓЩ€Щ† Щ‚Ш§ШЇШ±Ш§Щ‹ Ш№Щ„Щ‰ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ‚Ш©Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш§Щ„ШўЩ†. ЩѓЩЉЩЃ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©Шџ"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "ЩЉШ¬ШЁ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©. Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„Щ‡Ш§ Шџ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Щ…ШґШ§Ш±ЩѓШ© Ш·Ш§ШЁШ№Ш§ШЄ CUPS"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Network configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ©"
+msgid "could not find any font in your mounted partitions"
+msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† Ш§ЩЉШ¬Ш§ШЇ ШЈЩЉ Ш®Ш·Щ€Ш· ЩЃЩЉ ШЄШ¬ШІШ¦Ш§ШЄЩѓ Ш§Щ„Щ…Ш­Щ…Щ„Ш©"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЁШЇШЎ Ш§Щ„Щ€ШµЩ„Ш© Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
+msgid "F00f bug"
+msgstr "F00f bug"
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Internet connection"
-msgstr "Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
 msgstr ""
-"Щ„Щ‚ШЇ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш·Ш±Щ‚ Щ…ШЄШ№ШЇШЇШ© Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§.\n"
-"\n"
+"ШЈЩЉ Ш№Щ…ЩЉЩ„ DHCP ШЄШ±ЩЉШЇ ШЈЩ† ШЄШіШЄШ®ШЇЩ…Шџ\n"
+"Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ dhcp-client."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ€ШµЩ„Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§"
+msgid "Domain Name:"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚:"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш©/ШЁШ·Ш§Щ‚Ш§ШЄ Ш§ЩЉШ«Ш±Щ†ШЄ"
+msgid "On Floppy"
+msgstr "Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LAN connection"
-msgstr "Щ€ШµЩ„Ш© LAN"
+msgid "Restore"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ©"
 
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "cable connection detected"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Щ€ШµЩ„Ш© ЩѓЩЉШЁЩ„"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
+msgstr "if set to yes, check if the network devices are in promiscuous mode."
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cable connection"
-msgstr "Щ€ШµЩ„Ш© ЩѓЩЉШЁЩ„"
+msgid "Looking for available packages..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш№Ш«Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "detected"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃЩ‡"
+msgid "Init Message"
+msgstr "Ш±ШіШ§Щ„Ш© Init"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "ADSL connection"
-msgstr "Щ€ШµЩ„Ш© ADSL"
+msgid "Rescue partition table"
+msgstr "ШҐЩ†Щ‚Ш§Ш° Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "detected %s"
-msgstr "ШЄЩ… Ш§ЩѓШЄШіШ§ЩЃ %s"
+msgid "Connection complete."
+msgstr "ШЄЩ… Ш§Щ„ШҐШЄШµШ§Щ„."
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "ISDN connection"
-msgstr "Щ€ШµЩ„Ш© ISDN"
+msgid "Cyprus"
+msgstr "Щ‚ШЁШ±Шµ"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Winmodem connection"
-msgstr "Щ€ШµЩ„Ш© Winmodem"
+msgid "Remove from RAID"
+msgstr "Ш§ШІШ§Щ„Ш© Щ…Щ† RAID"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "detected on port %s"
-msgstr "ШЄЩ…  Ш§ЩѓШЄШґШ§ЩЃЩ‡ Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Щ…ЩЃШЄШ§Ш­ Ш§Щ„ШЄШґЩЃЩЉШ± Щ‡Ш°Ш§ ШЁШіЩЉШ· Ш¬ШЇШ§ (ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† %d Ш­Ш±ЩЃШ§ Ш№Щ„Щ‰ Ш§Щ„ШЈЩ‚Щ„)"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Configuration Wizards"
+msgstr "Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
 
 #: ../../network/netconnect.pm:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Щ€ШµЩ„Ш© Щ…Щ€ШЇЩ… Ш№Ш§ШЇЩЉШ©"
+msgid "ISDN connection"
+msgstr "Щ€ШµЩ„Ш© ISDN"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЈШ¬Щ‡ШІШ©..."
+msgid "primary"
+msgstr "ШЈШіШ§ШіЩЉ"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„Ш®ШЁЩЉШ±"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\", Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© \"%s\""
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш·Щ€Ш© Щ‡ЩЉ ?Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡Ш§ Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„.\n"
+"\n"
+"ШіЩЉЩ‚Щ€Щ… DrakX ШЁШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ Щ‡Ш°Ш§ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
+"Ш±Ш§Ш¬Ш№ ЩѓЩ„ Ш®ШЇЩ…Ш© ШЁШЄЩ…Ш№Щ† Щ€ Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† ШЄЩ„Щѓ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ? ШЄШ­ШЄШ§Ш¬Щ‡Ш§\n"
+"ШЁШґЩѓЩ„ ШЇШ§Ш¦Щ… Ш№Щ†ШЇ Ш§?Щ‚Щ„Ш§Ш№.\n"
+"\n"
+"ШіЩЉШЄЩ… Ш№Ш±Ш¶ ШґШ±Ш­ Щ‚ШµЩЉШ± Ш­Щ€Щ„ Ш§Щ„Ш®ШЇЩ…Ш© Ш№Щ†ШЇ\n"
+"Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§. Ш№Щ…Щ€Щ…Ш§Щ‹, Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇ Щ…Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш®ШЇЩ…Ш© Щ…ЩЃЩЉШЇШ© ШЈЩ… ?,\n"
+"ЩЃЩ…Щ† Ш§?ЩЃШ¶Щ„ ШЄШ±Щѓ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉ.\n"
+"\n"
+"!! ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш±Ш­Щ„Ш© ЩѓЩ† Ш­Ш°Ш±Ш§ЩЏ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ\n"
+"ЩѓШ®Ш§ШЇЩ…: Ш±ШЁЩ…Ш§ Щ„Щ† ШЄШ±ЩЉШЇ ШЁШЇШЎ ШЈЩЉ Ш®ШЇЩ…Ш§ШЄ ? ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
+"ЩЃШ¶Щ„Ш§Щ‹ ШЄШ°ЩѓШ± ШЈЩ† Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Щ‚ШЇ ШЄЩѓЩ€Щ† Ш®Ш·Ш±Ш© Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ\n"
+"Щ…ШЄШ§Ш­Ш© Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…. ШЁШґЩѓЩ„ Ш№Ш§Щ… Ш§Ш®ШЄШ± ЩЃЩ‚Ш· Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
+"!!"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ"
+msgid "Skip"
+msgstr "ШЄШ®Ш·ЩЉ"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡"
+msgid "Niue"
+msgstr "Щ†ЩЉЩ€ЩЉ"
 
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓ ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©.\n"
-"\n"
-"Щ†Ш­Щ† Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ.\n"
-"Ш§Ш°Ш§ Щ„Щ… ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ, Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† Ш№Щ„Щ‰ Ш§Щ„ШµЩ†ШЇЩ€Щ‚.\n"
+"ШЄЩ†ШґШ·/ШЄШ®Щ…ШЇ ЩѓЩ„ Щ€Ш§Ш¬Щ‡Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Щ‡ЩЉШ¦Ш© ЩѓЩЉ ШЄШЁШЇШЈ\n"
+"Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№."
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"Щ„ШЈЩ†Щѓ ШЄЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ«ШЁЩЉШЄ Ш№ШЁШ± Ш§Щ„ШґШЁЩѓШ©, ЩЃЩ‚ШЇ ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Щ…ШіШЁЩ‚Ш§Щ‹.\n"
-"Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚ Щ„Ш­ЩЃШё Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ, ШЈЩ€ Ш§Щ†Щ‚Ш± Ш§Щ„ШєШ§ШЎ Щ„ШҐШ№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
-"Щ€ Ш§Щ„ШґШЁЩѓШ©.\n"
+"ШЄШ±ШЇШЇ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШЁШ§Щ„Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ (Ш§Щ„Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ ШЄШґЩЉШ± Ш§Щ„Щ‰ Ш§Щ„Ш№ШЇШЇ Ш§Щ„ШЄЩ‚Ш±ЩЉШЁЩЉ Щ…Щ† Ш§Щ„ШЄШ№Щ„ЩЉЩ…Ш§ШЄ "
+"Ш§Щ„ШЄЩЉ ЩЉШіШЄШ·ЩЉШ№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШЄЩ†ЩЃЩЉШ°Щ‡Ш§ ЩЃЩЉ Ш§Щ„Ш«Ш§Щ†ЩЉШ© Ш§Щ„Щ€Ш§Ш­ШЇШ©)"
 
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "important"
+msgstr "Щ…Щ‡Щ…"
+
+#: ../../standalone/drakbackup:1
 #, c-format
+msgid "Total Progress"
+msgstr "Ш§Ш¬Щ…Ш§Щ„ЩЉ Ш§Щ„ШЄЩ‚ШЇЩ…"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
 msgstr ""
+"ШіЩЉЩ‚Щ€Щ… DrakX ШЈЩ€?Щ‹ ШЁШ§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Щ€Ш¬Щ€ШЇ ШЈШ¬Щ‡ШІШ© IDE Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±. ШіЩЉЩ‚Щ€Щ…\n"
+"ШЈЩЉШ¶Ш§Щ‹ ШЁШ§Щ„ШЁШ­Ш« Ш№Щ† ШЁШ·Ш§Щ‚Ш§ШЄ PCI SCSI Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ. Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш©\n"
+"SCSI,ШіЩЉЩ‚Щ€Щ… DrakX ШЁШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Щ…Щ†Ш§ШіШЁ ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉШ§Щ‹.\n"
 "\n"
+"Щ€ ?Щ† Ш№Щ…Щ„ЩЉШ© Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ Щ„ЩЉШіШЄ Ш®Ш§Щ„ЩЉШ© Щ…Щ† Ш§?Ш®Ш·Ш§ШЎ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШіШ¤Ш§Щ„Щѓ Ш№Щ…Щ‘Ш§ "
+"Ш§Ш°Ш§\n"
+"ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© PCI SCSI. Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ \"Щ†Ш№Щ…\" ШіЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШЁШ·Ш§Щ‚Ш§ШЄ SCSI\n"
+"Щ„ШЄШ®ШЄШ§Ш± Щ…Щ†Щ‡Ш§. Ш§Щ†Щ‚Ш± \"?\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ№Щ„Щ… ШЈЩ†Щ‡ ? ШЄЩ€Ш¬ШЇ ШЁШ·Ш§Щ‚Ш§ШЄ SCSI Ш№Щ„Щ‰\n"
+"Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§Щ‹, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§\n"
+"Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Ш®ШЄЩЉШ§Ш± \"Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ\" Щ€ Щ†Щ‚Ш±\n"
+"\"Ш§Щ„ШЄШ§Щ„ЩЉ->\". ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш«Щ… Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ\n"
+"->\" Щ„Щ„Ш№Щ€ШЇШ© Ш§Щ„Щ‰ ШґШ¤Ш§Щ„ Щ€Ш§Ш¬Щ‡Ш© SCSI.\n"
 "\n"
+"Ш§Ш°Ш§ Ш§Ш¶Ш·Ш±Ш±ШЄ Ш§Щ„Щ‰ ШЄШ­ШЇЩЉШЇ Щ…Щ€Ш§Ш¦Щ… PCI SCSI ЩЉШЇЩ€ЩЉШ§Щ‹, ЩЃШіЩЉШіШЈЩ„Щѓ DrakX Ш№Щ…Щ‘Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ\n"
+"ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§. ЩЉШ¬ШЁ ШЈЩ† ШЄШіЩ…Ш­ Щ„ЩЂ DrakX ШЁШЈЩ† ЩЉШЄШ­Щ‚Щ‚ Щ…Щ†\n"
+"Ш§Щ„Ш№ШЄШ§ШЇ Щ„Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„ШЁШ·Ш§Щ‚Ш© Щ€ Ш§Щ„ШЄЩЉ ЩЉЩЊЩЏШ­ШЄШ§Ш¬ Ш§Щ„ЩЉЩ‡Ш§ Щ„ЩЉШЄЩ… ШЁШЇШЎ\n"
+"Ш№Щ…Щ„ Ш§Щ„ШЁШ·Ш§Щ‚Ш©. ЩЃЩЉ ШЈШєЩ„ШЁ Ш§?Щ€Щ‚Ш§ШЄ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШ§Щ„Ш®Ш·Щ€Ш© ШЇЩ€Щ† ШЈЩЉ\n"
+"Щ…ШґШ§ЩѓЩ„.\n"
 "\n"
-"Щ†Ш­Щ† Ш§Щ„ШўЩ† ШіЩ†Щ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш© %s.\n"
-"\n"
-"Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Щ„Щ„Щ…ШЄШ§ШЁШ№Ш©."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Щ†Ш­Щ† Ш§Щ„ШўЩ† ШіЩ†Щ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш© %s."
+"Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ…ЩѓЩ† DrakX Щ…Щ† Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉШ©Щ„ШЄЩ…Ш±ЩЉШ±Щ‡Ш§\n"
+"Ш§Щ„Щ‰ Ш§Щ„Ш№ШЄШ§ШЇ, ЩЃЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш©\n"
+"Ш§Щ„Щ…ШґШєЩ‘Щ„ ЩЉШЇЩ€ЩЉШ§Щ‹."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Internet connection & configuration"
-msgstr "Щ€ШµЩ„Ш© Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ€ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
+msgid "Users"
+msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Щ€Щ†"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure the connection"
-msgstr "Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "Aruba"
+msgstr "ШЈШ±Щ€ШЁШ§"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Disconnect"
-msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "Preparing bootloader..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Ш¶ЩЉШ± Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№..."
 
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Connect"
-msgstr "Ш§ШЄШµЩ„"
+msgid "Gateway (e.g. %s)"
+msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ© (Щ…Ш«Щ„Ш§Щ‹ %s)"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
-msgstr ""
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+msgid "The passwords do not match"
+msgstr "ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± ШєЩЉШ± Щ…ШЄШ·Ш§ШЁЩ‚Ш©"
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+msgid "Examples for correct IPs:\n"
+msgstr "ШЈЩ…Ш«Щ„Ш© Щ„Ш№Щ†Ш§Щ€ЩЉЩ† IP ШµШ­ЩЉШ­Ш©:\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "ШЈЩ†ШЄ Щ„ШіШЄ Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш­Ш§Щ„ЩЉШ§Щ‹"
+msgid "Frequency (MHz)"
+msgstr "Ш§Щ„ШЄШ±ШЇШЇ (Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ)"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ШЈЩ†ШЄ Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш­Ш§Щ„ЩЉШ§Щ‹"
+"Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ Ш§Щ„Щ…Ш­ЩЃЩ€ШёШ© Щ„Щ„Ш­ШІЩ…, Щ‚Щ… ШЁШЁШЇШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Ш№ Ш®ЩЉШ§Ш± ``linux "
+"defcfg=floppy''"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉШЁШЇШЈ Ш§Щ„Ш№Щ†Щ€Ш§Щ† ШЁЩЂ 'ftp:' ШЈЩ€ 'http:'"
+msgid "the number of the processor"
+msgstr "Ш±Щ‚Щ… Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Ш§Щ„ШЁШ±Щ€ЩѓШіЩЉ ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† http://..."
+msgid "Hardware clock set to GMT"
+msgstr "ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш¶ШЁЩ€Ш·Ш© Ш№Щ„Щ‰ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "FTP proxy"
-msgstr "ШЁШ±Щ€ЩѓШіЩЉ FTP"
+msgid "Give a file name"
+msgstr "Ш§Ш№Ш· Ш§ШіЩ… Щ…Щ„ЩЃ"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "ШЁШ±Щ€ЩѓШіЩЉ HTTP"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…Щ€ШµЩ„Ш© ШҐЩ„ЩЉЩ‡ Ш·Ш§ШЁШ№ШЄЩѓ."
 
-#: ../../network/network.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЁШ±Щ€ЩѓШіЩЉ"
+msgid "Change Cd-Rom"
+msgstr "ШєЩЉЩ‘Ш± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШЁЩ€Ш§ШЁШ§ШЄ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
+msgid "Paraguay"
+msgstr "Ш§Щ„ШЁШ§Ш±Ш¬Щ€Ш§ЩЉ"
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "Ш№Щ†Щ€Ш§Щ† Ш®Ш§ШЇЩ… DNS ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШЄШ±Ш§ЩѓЩ…ЩЉ (Щ„Ш§ ШЄШіШЄШЁШЇЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ‚ШЇЩЉЩ…Ш©)"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШЁЩ€Ш§ШЁШ©"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…Ш№Ш±Щ€ЩЃ Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s)"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ© (Щ…Ш«Щ„Ш§Щ‹ %s)"
+msgid "force"
+msgstr "Ш§Ш¬ШЁШ§Ш±"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "Ш®Ш§ШЇЩ… DNS"
+msgid "Exit"
+msgstr "Ш®Ш±Щ€Ш¬"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ.\n"
-"ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШµШ§Щ„Ш­Ш§Щ‹ Щ€ ЩѓШ§Щ…Щ„Ш§Щ‹,\n"
-"Щ…Ш«Щ„ ``mybox.mylab.myco.com''.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ Ш§ШЇШ®Ш§Щ„ Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„ШЁЩ€Ш§ШЁШ© Ш§Щ† Щ€ЩЏШ¬ШЇШЄ."
+"Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш№ШЄЩ…Ш§ШЇШ§Щ‹ Ш№Щ„Щ‰ Ш·Ш±Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЃШіЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш­Щ€Ш§Щ„ЩЉ %d "
+"Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ Щ…Щ† Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©."
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Щ„Щ… ШЄЩ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© ШЈЩЉ Щ€Ш§Ш¬Щ‡Ш§ШЄ.\n"
+"Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Щ… ШЈЩ€Щ„Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Ш¶ШєШ· Ш№Щ„Щ‰ 'ШЄЩ‡ЩЉШ¦Ш©'"
 
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "Estonian"
+msgstr "Ш§Щ„ШҐШіШЄЩ€Щ†ЩЉШ©"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache Щ‡Щ€ Ш®Ш§ШЇЩ… Щ€ЩЉШЁ. Щ€ ЩЉЩЏШіШЄШ®ШЇЩ… Щ„Ш®ШЇЩ…Ш© Щ…Щ„ЩЃШ§ШЄ HTML Щ€ CGI."
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Start at boot"
-msgstr "Ш§ШЁШЇШЈ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Add/Del Clients"
+msgstr "ШЈШ¶ЩЃ/Ш§Ш­Ш°ЩЃ Ш§Щ„Ш№Щ…Щ„Ш§ШЎ"
 
-#: ../../network/network.pm:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Ш№ЩЉЩ‘Щ† Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ…Щ† Ш№Щ†Щ€Ш§Щ† DHCP"
+msgid "Choose the network interface"
+msgstr "Ш§Ш®ШЄШ± Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../network/network.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Network Hotplugging"
-msgstr "Network Hotplugging"
+msgid "Unknown Model"
+msgstr "Ш·Ш±Ш§ШІ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "ШЄШЄШЁШ№ Щ‡Щ€ЩЉШ© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШЁЩѓШ© (Щ…ЩЃЩЉШЇ Щ„Щ„Ш¬Ш§ШіШЁШ§ШЄ Ш§Щ„ШЇЩЃШЄШ±ЩЉШ©)"
+msgid "CD/DVD burners"
+msgstr "ШЈШ¬Щ‡ШІШ© Щ†ШіШ® CD/DVD"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DHCP host name"
-msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ DHCP"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§Щ‚Щ„Ш§Ш№Щ‡Ш§ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§\n"
+"    (Щ„ЩЂ MS-DOS Щ€ Щ„ЩЉШі Щ„ЩЂ lilo)\n"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ ШµЩ€Ш±Ш©"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "IP address"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP"
+msgid "Firewalling configuration detected!"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШҐШ№ШЇШ§ШЇ Щ„Щ„Ш¬ШЇШ§Ш± Ш§Щ„Щ†Ш§Ш±ЩЉ!"
 
-#: ../../network/network.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "Connection name"
+msgstr "Ш§ШіЩ… Ш§Щ„ШҐШЄШµШ§Щ„"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Automatic IP"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
+msgstr ""
+"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШіЩЉЩ†ЩЉ Щ„Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ\n"
+"ШЁШ№ШЇШЇ Ш§Щ„Ш­Ш±Щ€ЩЃ"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
+msgid "Updating package selection"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­ШЇЩЉШ« Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШЁЩѓШ© %s"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Щ…Щ„ЩЃ loopback %sШџ"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ ШЄЩ‡ЩЉШ¦Ш© IP Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©.\n"
-"ЩѓЩ„ Щ…Ш§ШЇШ© ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„Щ‡Ш§ ЩѓШ№Щ†Щ€Ш§Щ† IP ШЁШґЩѓЩ„ Щ…Щ†Щ‚Щ€Ш·\n"
-"(Щ…Ш«Щ„Ш§Щ‹, 1.2.3.4)."
+"ШЄЩ… ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† ШЁЩ†Ш¬Ш§Ш­.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШ«ШЁЩЉШЄ."
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"ШЄШ­Ш°ЩЉШ±: ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ ШіШ§ШЁЩ‚Ш§Щ‹ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"ШЁЩѓЩ„ ШЁШіШ§Ш·Ш© Ш§Щ‚ШЁЩ„ ШЈЩ† ШЄЩЏШЁЩ‚ЩЉ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш№ШЇЩ‘.\n"
-"ШЄШ№ШЇЩЉЩ„ Ш§Щ„Ш­Щ‚Щ€Щ„ ШЈШЇЩ†Ш§Щ‡ ШіЩЉШєЩЉЩ‘Ш± Щ‡Ш°Щ‡ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©."
+msgid "the number of buttons the mouse has"
+msgstr "Ш№ШЇШЇ ШЈШІШ±Ш§Ш± Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../network/shorewall.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
 msgstr ""
-"ШЄШ­Ш°ЩЉШ±! ШЄЩ… ШҐЩЉШ¬Ш§ШЇ ШҐШ№ШЇШ§ШЇ Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ Щ…Щ€Ш¬Щ€ШЇ Щ…ШіШЁЩ‚Ш§. Ш±ШЁЩ…Ш§ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШµЩ„Ш§Ш­ ЩЉШЇЩ€ЩЉ ШЁШ№ШЇ "
-"Ш§Щ„ШЄШ«ШЁЩЉШЄ."
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШҐШ№ШЇШ§ШЇ Щ„Щ„Ш¬ШЇШ§Ш± Ш§Щ„Щ†Ш§Ш±ЩЉ!"
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„ШЇЩ„ЩЉЩ„ (ШЈЩ€ Ш§Щ„Щ€Ш­ШЇШ©) Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… ЩЃЩЉЩ‡Ш§ Щ€Ш¶Ш№\n"
+" Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ„Щ„Ш­ШіШ§ШЁ"
+msgid "Replay"
+msgstr "Ш§Ш№Ш§ШЇШ©"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШЇШ®Щ€Щ„ Щ„Щ„Ш­ШіШ§ШЁ"
+msgid "Backup other files"
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ ШЈШ®Ш±Щ‰"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ„Щ„Ш§ШЄШµШ§Щ„ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
+msgid "No floppy drive available"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШіЩ€Ш§Щ‚Ш© ШЈЩ‚Ш±Ш§Шµ Щ…Ш±Щ†Ш©"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Connection speed"
-msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "Backup files are corrupted"
+msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ЩЃШ§ШіШЇШ©"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„ШҐШЄШµШ§Щ„"
+msgid "TV norm:"
+msgstr "TV norm :"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Choose your country"
-msgstr "ШҐШ®ШЄШ± ШЁЩ„ШЇЩѓ"
+msgid "Cpuid family"
+msgstr "Ш№Ш§Ш¦Щ„Ш© Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS Ш§Щ„Ш«Ш§Щ†ЩЉ Щ„Щ„Щ…Щ€ЩЃШ± (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
+msgid "32 MB"
+msgstr "32 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS Ш§Щ„ШЈЩ€Щ„ Щ„Щ„Щ…Щ€ЩЃШ± (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© AZERTY (Ш¬ШЇЩЉШЇ)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Ш±Щ‚Щ… Щ‡Ш§ШЄЩЃ Ш§Щ„Щ…Щ€ЩЃШ±"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr "Щ†Ш№Щ… ШЄШ№Щ†ЩЉ ШЈЩ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„Щ…ШіШ§Ш№ШЇ Щ„Щ„Ш№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Ш­ШіШ§ШЁЩЉШ© Щ„ШЇЩЉЩ‡ Щ…ШЄШ¬Щ‡ Щ„Щ„ШҐШіШЄШ«Щ†Ш§ШЎШ§ШЄ"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…Щ€ЩЃШ± (Щ…Ш«Щ„Ш§Щ‹ provider.net)"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Щ„Щ‚ШЇ Ш§Ш®ШЄШ±ШЄ ШЄШ¬ШІШ¦Ш© RAID ШЁШ±Щ…Ш¬ЩЉШ© ЩѓШЄШ¬ШІШ¦Ш© Ш¬Ш°Ш±ЩЉШ© (/).\n"
+"Щ„Ш§ ЩЉШіШЄШ·ЩЉШ№ ШЈЩЉ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ Ш°Щ„Щѓ ШЁШЇЩ€Щ† ШЄШ¬ШІШ¦Ш© /boot.\n"
+"ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Ш§Ш¶Ш§ЩЃШ© ШЄШ¬ШІШ¦Ш© /boot"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Ш±Щ‚Щ… Ш§Щ„Щ‡Ш§ШЄЩЃ Ш§Щ„ШґШ®ШµЩЉ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ"
+msgid "Previous"
+msgstr "Ш§Щ„ШіШ§ШЁЩ‚"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Card IO_1"
+msgid "Other OS (MacOS...)"
+msgstr "Щ†ШёШ§Щ… ШўШ®Ш± (MacOS...)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Card IO_0"
+msgid "To activate the mouse,"
+msgstr "Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ЩЃШЈШ±Ш©,"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Card IO"
-msgstr "Card IO"
+msgid "Bringing up the network"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШґШєЩЉЩ„ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../common.pm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
+msgid "Screenshots will be available after install in %s"
+msgstr "ШіШЄЩѓЩ€Щ† Щ„Щ‚Ш·Ш§ШЄ Ш§Щ„ШґШ§ШґШ© Щ…Щ€Ш¬Щ€ШЇШ© ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ %s"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IRQ"
-msgstr "Card IRQ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"ЩЃЩЉ Ш§Щ„ШЈШ№Щ„Щ‰ ШіШЄШ¬ШЇ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Щ„ЩЉЩ†ЩѓШі Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ€ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ "
+"Ш§Щ„Ш®Ш§Шµ ШЁЩѓ.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄЩЏШЁЩ‚ЩЉ ШҐШ®ШЄЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬, Щ€ Щ‡ЩЉ Ш¬ЩЉШЇШ© Щ„ШЈШєЩ„ШЁ ШЈЩ†Щ€Ш§Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
+"ШҐШ°Ш§ Щ‚Щ…ШЄ ШЁШ№Щ…Щ„ ШЈЩЉ ШЄШєЩЉЩЉШ±Ш§ШЄ ЩЃЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШ№Ш±ЩЃ Ш§Щ„ШЄЩ‚ШіЩЉЩ… Ш§Щ„Ш¬Ш°Ш± (\"/\"). Щ„Ш§ ШЄШ®ШЄШ±\n"
+"ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш¶ШєЩЉШ±Ш© Ш¬ШЇШ§ Щ€ ШҐЩ„Ш§ Щ„Щ† ШЄШіШЄШ·ЩЉШ№ ШЄШ«ШЁЩЉШЄ ШЁШ±Ш§Щ…Ш¬ ЩѓШ§ЩЃЩЉШ©. ШҐШ°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШ®ШІЩЉЩ† "
+"Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ\n"
+"Ш№Щ„Щ‰ ШЄЩ‚ШіЩЉЩ… Щ…ШіШЄЩ‚Щ„ ЩЃШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш№Щ…Щ„ ШЄЩ‚ШіЩЉЩ… Щ„ЩЂ\"/home\"\n"
+"(Щ…Щ…ЩѓЩ† ЩЃЩ‚Ш· ШҐШ°Ш§ ЩѓШ§Щ† Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† ШЄЩ‚ШіЩЉЩ… Щ„Щ„ЩЉЩ†ЩѓШі).\n"
+"\n"
+"ЩѓЩ„ ШЄЩ‚ШіЩЉЩ… Щ…ЩЏШ№Ш·Щ‰ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Ш§Щ„ШҐШіЩ…\", \"Ш§Щ„ШіШ№Ш©\".\n"
+"\n"
+"\"Ш§Щ„ШҐШіЩ…\" Щ…Ш±ЩѓШЁ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Щ†Щ€Ш№ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\", \"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\",\n"
+"\"Ш±Щ‚Щ… Ш§Щ„ШЄЩ‚ШіЩЉЩ…\" (Щ…Ш«Щ„Ш§, \"hda1\").\n"
+"\n"
+"\"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\" ШЇШ§Ш¦Щ…Ш§ Щ‡Щ€ Ш­Ш±ЩЃ ШЁШ№ШЇ \"hd\" ШЈЩ€ \"sd\". ШЁШ§Щ„Щ†ШіШЁШ© Щ„Щ„ШЈЩ‚Ш±Ш§Шµ "
+"Ш§Щ„ШµЩ„ШЁШ©\n"
+"Щ…Щ† Щ†Щ€Ш№ IDE ЩЃШҐЩ†:\n"
+" * \"a\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
+"\n"
+" * \"b\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
+"\n"
+" * \"c\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
+"\n"
+" * \"d\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
+"\n"
+"ШЈЩ…Ш§ ШЁШ§Щ„Щ†ШіШЁШ© Щ„ШЈЩ‚Ш±Ш§Шµ ШіЩѓШІЩЉ SCSI ЩЃШ§Щ„Ш­Ш±ЩЃ \"a\" ЩЉШ№Щ†ЩЉ \"ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Щ€ Ш§Щ„Ш­Ш±ЩЃ \"b"
+"\"\n"
+"ЩЉШ№Щ†ЩЉ \"Ш«Ш§Щ†ЩЉ ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Ш§Щ„Ш®."
 
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ…Щ„ШЈ ШЈЩ€ ШЈШґЩ‘Ш± Ш№Щ„Щ‰ Ш§Щ„Ш­Щ‚Щ„ ШЈШЇЩ†Ш§Щ‡"
+msgid "Tanzania"
+msgstr "ШЄЩ†ШІШ§Щ†ЩЉШ§"
 
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ€ШµЩ„Ш©"
+msgid "Computing FAT filesystem bounds"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш­ШіШ§ШЁ Ш±Щ€Ш§ШЁШ· Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"\n"
+"Backup Sources: \n"
 msgstr ""
-"Щ„Ш§ ЩЉШЁШЇЩ€ ШЈЩ† Ш§Щ„Щ†ШёШ§Щ… Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"Ш­Ш§Щ€Щ„ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+"\n"
+"Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ШіШ§Ш№ШЇ :\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "Щ„ШЈШіШЁШ§ШЁ ШЈЩ…Щ†ЩЉШ©, ШіЩЉШЄЩ… Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ Ш§Щ„ШўЩ†."
+msgid "Content of the file"
+msgstr "Щ…Ш­ШЄЩ€ЩЉШ§ШЄ Ш§Щ„Щ…Щ„ЩЃ"
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„ШўЩ† Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Authentication LDAP"
+msgstr "ШЄШ­Щ‚Щ‚ LDAP"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„Щ€ШµЩ„Ш©..."
+msgid "Let me pick any driver"
+msgstr "Ш§ШіЩ…Ш­ Щ„ЩЉ ШЈЩ† ШЈШ®ШЄШ§Ш± Щ…ШґШєЩ„"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЈЩ† ШЄШ­Ш§Щ€Щ„ ШЈЩ† ШЄШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш§Щ„ШўЩ†Шџ"
+msgid "Profile "
+msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„:"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "transmitted"
+msgstr "Щ…ШЁШ№Щ€Ш«Ш©"
 
-#: ../../partition_table/raw.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
-"Щ‡Щ†Ш§Щѓ ШґШ¦ ШіЩЉШ¦ ЩЉШ­ШµЩ„ Щ„Щ„Щ‚Ш±Шµ. \n"
-"Щ„Щ‚ШЇ ЩЃШґЩ„ Ш§Ш®ШЄШЁШ§Ш± Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ. \n"
-"Щ‡Ш°Ш§ ЩЉШ№Щ†ЩЉ ШЈЩ† ЩѓШЄШ§ШЁШ© ШЈЩЉ ШґШ¦ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ ШіЩЉЩ†ШЄЩ‡ЩЉ ШЁШЁЩЉШ§Щ†Ш§ШЄ Ш№ШґЩ€Ш§Ш¦ЩЉШ© Щ€ ЩЃШ§ШіШЇШ©."
+msgid "Palestine"
+msgstr "ЩЃЩ„ШіШ·ЩЉЩ†"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (Ш§ЩЃШЄШ±Ш§Ш¶ЩЉ)"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../printer/cups.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "On CUPS server \"%s\""
-msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… CUPS \"%s\""
+msgid "%d comma separated strings"
+msgstr "%d Ш­Ш±ЩЃЩЉШ§ШЄ Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Remote Printers"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Here is the full list of keyboards available"
+msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Theme name"
+msgstr "Ш§ШіЩ… Ш§Щ„ШіЩ…Ш©"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ)"
+msgid "/_Help"
+msgstr "/_Щ…ШіШ§Ш№ШЇШ©"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "(on %s)"
-msgstr "(Ш№Щ„Щ‰ %s)"
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ "
+"Ш§Щ„ЩЉЩ‡Ш§ Щ…Щ† Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© Щ€ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЈЩЉ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЁШ№ЩЉШЇШ©."
 
-#: ../../printer/data.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Common Unix Printing System"
+msgid "the width of the progress bar"
+msgstr "Ш№Ш±Ш¶ ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "Cook Islands"
+msgstr "Ш¬ШІШ± Ш§Щ„ЩѓЩ€Щѓ"
 
-#: ../../printer/data.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR New Generation"
+msgid "Formatting partition %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Hostname required"
+msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Line Printer Daemon"
+msgid "Unselect fonts installed"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ…Ш«ШЁШЄШ©"
 
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Cancel"
+msgstr "Ш§Щ„ШєШ§ШЎ"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Print, Don't Queue"
+msgid "Searching for configured scanners ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Щ…Ш№ШЇЩ‘Ш©..."
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Unknown Model"
-msgstr "Ш·Ш±Ш§ШІ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
+msgid "Wheel"
+msgstr "Wheel"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Unknown model"
-msgstr "Ш·Ш±Ш§ШІ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
+msgid "Videocard"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "%s (Port %s)"
-msgstr "%s (Ш§Щ„Щ…Щ†ЩЃШ° %s)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr "\tالنسخ الإحتياطية تستخدم tar و bzip2\n"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "Host %s"
-msgstr "Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ %s"
+msgid "Remove Selected"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…Ш§ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Network %s"
-msgstr "Ш§Щ„ШґШЁЩѓШ© %s"
+msgid "/Autodetect _modems"
+msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† ШЈ_Ш¬Щ‡ШІШ© Ш§Щ„Щ…Щ€ШЇЩ…"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Interface \"%s\""
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©  \"%s\""
+msgid "Remove printer"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Local network(s)"
-msgstr "Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"ШЄШ­Ш°ЩЉШ±!\n"
+"\n"
+"DrakX ШіЩЉЩ‚Щ€Щ… Ш§Щ„ШўЩ† ШЁШЄШєЩЉЩЉШ± Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Windows. ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹:\n"
+"Щ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Ш®Ш·Ш±Ш©. ЩЃШҐШ°Ш§ Щ„Щ… ШЄЩѓЩ† ЩЃШ№Щ„ШЄ Ш°Щ„Щѓ,\n"
+"ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ€Щ„Ш§Щ‹ Ш§Щ„Ш®Ш±Щ€Ш¬ Щ…Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ, Ш«Щ… ШґШєЩ‘Щ„ scandisk\n"
+"ЩЃЩЉ Windows (Щ€ Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ§Щ‹ defrag), Ш«Щ… ШЈШ№ШЇ\n"
+"Ш§Щ„ШЄШ«ШЁЩЉШЄ. ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ЩѓШ°Щ„Щѓ Ш№Щ…Щ„ Щ†ШіШ®Ш© Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ© Щ…Щ† ШЁЩЉШ§Щ†Ш§ШЄЩѓ.\n"
+"Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШЄШЈЩѓШЇШ§Щ‹, Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ… (Щ„Ш§ Щ…ШґШєЩ„)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr "ШЈЩЉ Ш®ШЇЩ…Ш© ШЄШ±ЩЉШЇ Ш§Щ„ШіЩ…Ш§Ш­ Щ„Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЈЩ† ШЄШЄШµЩ„ ШЁЩ‡Ш§Шџ"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ", using command %s"
-msgstr ", ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± %s"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
+"ШЈЩ‡Щ„Ш§ ШЁЩѓЩ… Ш§Щ„Щ‰ ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ±ЩЉШЇ.\n"
+"\n"
+"Щ‡Щ†Ш§ ШіЩЉЩ…ЩѓЩ†Щѓ ШҐШ№ШЇШ§ШЇ Щ†ШёШ§Щ… Ш§Щ„ШЄЩ†ШЁЩЉЩ‡\n"
 
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… Novell \"%s\", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
+msgid "Other"
+msgstr "ШЈШ®Ш±Щ‰"
 
-#: ../../printer/main.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\", Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© \"%s\""
+msgid "Default"
+msgstr "Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ"
 
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° \"%s\""
+msgid "Button 2 Emulation"
+msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± 2"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… LPD \"%s\", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
+msgid "type1inst building"
+msgstr "ШЁЩ†Ш§ШЎ type1inst"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ", printing to %s"
-msgstr ", Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ %s"
+msgid "Abiword"
+msgstr "Abiword"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ", multi-function device"
-msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
+msgid "choose image file"
+msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ ШµЩ€Ш±Ш©"
 
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ HP JetDirect"
+msgid "X server"
+msgstr "Ш®Ш§ШЇЩ… X"
 
-#: ../../printer/main.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ", multi-function device on USB"
-msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ Щ…Щ†ЩЃШ° USB"
+msgid "Domain Admin User Name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ…ШЇЩЉШ± Ш§Щ„Щ†Ш·Ш§Щ‚"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
+msgid "There was an error while scanning for TV channels"
+msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш¶ШЁШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ", USB printer"
-msgstr ", Ш·Ш§ШЁШ№Ш© USB"
+msgid "US keyboard (international)"
+msgstr "Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ ШЈЩ…Ш±ЩЉЩѓЩЉШ© (ШЇЩ€Щ„ЩЉ)"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ", USB printer \\#%s"
-msgstr ", Ш·Ш§ШЁШ№Ш© USB \\#%s"
+msgid "Not installed"
+msgstr "ШєЩЉШ± Щ…Ш«ШЁЩ‘ШЄ"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid " on parallel port \\#%s"
-msgstr " Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
+msgid "LAN connection"
+msgstr "Щ€ШµЩ„Ш© LAN"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Local Printers"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid "/File/-"
+msgstr "/Щ…Щ„ЩЃ/-"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Pipe job into a command"
-msgstr "Ш­Щ€Щ‘Щ„ Ш§Щ„Щ€ШёЩЉЩЃШ© Ш§Щ„Щ‰ Ш§Щ„ШЈЩ…Ш±"
+msgid "Italian"
+msgstr "Ш§Щ„ШҐЩЉШ·Ш§Щ„ЩЉШ©"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "ШЈШЇШ®Щ„ URI Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Basic"
+msgstr "ШЈШіШ§ШіЩЉ"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Printer on NetWare server"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… NetWare"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2002 Щ„ЩЂMandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows 95/98/NT"
+msgid "Honduras"
+msgstr "Щ‡Щ†ШЇЩ€Ш±Ш§Ші"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© (TCP/Socket)"
+msgid "pdq"
+msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… lpd ШЁШ№ЩЉШЇ"
+msgid "Card IO"
+msgstr "Card IO"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… CUPS ШЁШ№ЩЉШЇ"
+msgid "when checked, owner and group won't be changed"
+msgstr "Ш№Щ†ШЇ Ш§Щ„ШЄШЈШґЩЉШ± Щ„Щ† ЩЉШЄЩ… ШЄШєЩЉЩЉШ± Ш§Щ„Щ…Ш§Щ„Щѓ Щ€ Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Remote printer"
-msgstr "Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"ШЄШ¬ШІШ¦Ш© Ш§Щ„ШҐЩ‚Щ„Ш§Ш№\n"
+"Щ‡Ш°Щ‡ Щ‡ЩЉ\n"
+"Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…ШІШЇЩ€Ш¬ ЩЃЩЉ Щ†ШёШ§Щ…Щѓ.\n"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Local printer"
-msgstr "Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ„ЩѓЩ„ Ш®Ш·Щ€Ш© Ш§Ш°Ш§ ЩѓЩ†ШЄ ШіШЄЩ‚Щ€Щ… ШЁШҐШ№Ш§ШЇШЄЩ‡Ш§ ШўЩ„ЩЉШ§Щ‹ ШЈЩ… ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЈЩ† ЩЉЩѓЩ€Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ "
+"ШЁШґЩѓЩ„ ЩЉШЇЩ€ЩЉ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Configuring applications..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ..."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ ШЈЩ† ШЄЩ‚Ш±Ш± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ЩЉШ¬ШЁ "
+"ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш°Ш№ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "\t-Network by FTP.\n"
+msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ FTP.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ..."
+msgid "Russian (Yawerty)"
+msgstr "Ш§Щ„Ш±Щ‘Щ€ШіЩЉШ© (Yawerty)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\"Шџ"
+msgid "You must enter a device or file name!"
+msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„ Ш¬Щ‡Ш§ШІ ШЈЩ€ Ш§ШіЩ… Щ…Щ„ЩЃ!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove printer"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "/_Quit"
+msgstr "/_Ш®Ш±Щ€Ш¬"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Learn how to use this printer"
-msgstr "ШЄШ№Щ„Щ… ЩѓЩЉЩЃ ШЄШіШЄШ®ШЇЩ… Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
+"ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ alcatel microcode.\n"
+"Щ‚Щ… ШЁШЄЩ†ШІЩЉЩ„Щ‡Ш§ Ш№Щ„Щ‰\n"
+"http://www.speedtouchdsl.com/dvreg_lx.htm\n"
+"Щ€ Ш§Щ†ШіШ® Ш§Щ„Щ…Щ„ЩЃ mgmt.o Ш§Щ„Щ‰ /usr/share/speedtouch"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Ш§Ш·ШЁШ№ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ш°Ш§ЩѓШ±Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©: %s ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
-msgstr "ШЄШ№Ш°Ш± Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ† Star Office/OpenOffice.org/GIMP."
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
+" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш­Ш±; ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ€ШІЩЉШ№Ш© Щ€/ШЈЩ€ ШЄШ№ШЇЩЉЩ„Щ‡\n"
+" ШЄШ­ШЄ ШЁЩ†Щ€ШЇ Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© (GPL) ЩѓЩ…Ш§ Щ†ЩЏШґЩђШ±ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+" Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш©; ШҐЩ…Ш§ Ш§ШҐШµШЇШ§Ш± Ш§Щ„Ш«Ш§Щ†ЩЉ Щ…Щ† Ш§Щ„ШЄШ±Ш®ЩЉШµ ШЈЩ€\n"
+" ШЈЩЉ Щ†ШіШ®Ш© ШЄШ§Щ„ЩЉШ© (Ш­ШіШЁ Ш§Ш®ШЄЩЉШ§Ш±Щѓ).\n"
+"\n"
+" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ ЩЉЩЏЩ€ШІЩ‘ЩЋШ№ Ш№Щ„Щ‰ ШЈЩ…Щ„ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…ЩЃЩЉШЇШ§,\n"
+" لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n"
+" Щ„Щ„ШҐШЄШ¬Ш§Ш± ШЈЩ€ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШєШ±Ш¶ Щ…Ш№ЩЉЩ†. Ш§Щ†ШёШ±\n"
+" Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„.\n"
+"\n"
+" ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ‚ШЇ ШЄШіЩ„Щ…ШЄ Щ†ШіШ®Ш© Щ…Щ† ШЄШ±Ш®ЩЉШµ GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш©\n"
+" Щ…Ш№ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬; ЩЃЩЉ Ш­Ш§Щ„Ш© Ш№ШЇЩ… ШЄШіЩ„Щ… Ш§Щ„Ш±Ш®ШµШ© Ш±Ш§ШіЩ„ Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш© Ш№Щ„Щ‰ Ш§Щ„Ш№Щ†Щ€Ш§Щ† "
+"Ш§Щ„ШЄШ§Щ„ЩЉ\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307,\n"
+" USA.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "ШЄЩ… Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ† Star Office/OpenOffice.org/GIMP ШЁЩ†Ш¬Ш§Ш­."
+msgid "access to compilation tools"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ Ш§Щ„ШЄШ¬Щ…ЩЉШ№"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…Щ† Star Office/OpenOffice.org/GIMP"
+msgid "Please select data to restore..."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЄШ§Ш±ЩЉШ® Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Ш§Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…Щ† Star Office/OpenOffice.org/GIMP"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… aboot, ЩЃЩ„Ш§ ШЄЩ†ШіЩ‰ ШЈЩ† ШЄШЄШ±Щѓ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© ЩЃЩЉ\n"
+"ШЁШЇШ§ЩЉШ© Ш§Щ„Щ‚Ш±Шµ (2048 Щ‚Ш·Ш§Ш№Ш§ШЄ ЩѓШ§ЩЃЩЉШ©)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr "ШЄШ№Ш°Ш±ШЄ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP."
+msgid "Standard test page"
+msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© Щ‚ЩЉШ§ШіЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr "ШЄЩ…ШЄ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP ШЁЩ†Ш¬Ш§Ш­."
+msgid "Create"
+msgstr "Ш§Щ†ШґШ§ШЎ ШЄШ¬ШІШ¦Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP"
+msgid "What"
+msgstr "Щ…Ш§Ш°Ш§ "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "ШЈШ¶ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP"
+msgid "There was an error ordering packages:"
+msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ЩЃЩЉ ШЄШ±ШЄЩЉШЁ Ш§Щ„Ш­ШІЩ…:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "ШЄЩ… ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШўЩ†."
+msgid "Bulgarian (BDS)"
+msgstr "Ш§Щ„ШЁЩ„ШєШ§Ш±ЩЉШ© (BDS)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Default printer"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©"
+msgid "Disable Server"
+msgstr "Ш№Ш·Щ‘Щ„ Ш§Щ„Ш®Ш§ШЇЩ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Ш№ЩЉЩ‘Щ† Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©"
+msgid "Filesystem encryption key"
+msgstr "Щ…ЩЃШЄШ§Ш­ ШЄШґЩЃЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Gujarati"
+msgstr "ШєЩ€Ш¬Ш§Ш±Ш§ШЄЩЉ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr "Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Ш·Ш±Ш§ШІ"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Ш·Ш±Ш§ШІ, Ш§Щ„Щ…ШґШєЩ‘Щ„"
+msgid "Save theme"
+msgstr "Ш§Ш­ЩЃШё Ш§Щ„ШіЩ…Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШІШ§Щ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‚ШЇЩЉЩ…Ш© \"%s\" ..."
+msgid "group"
+msgstr "Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Щ€ШµЩЃ, Ш§Щ„Щ…ЩѓШ§Щ†"
+msgid "Brazil"
+msgstr "Ш§Щ„ШЁШ±Ш§ШІЩЉЩ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Щ†Щ€Ш№ Щ€ШµЩ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Auto Install"
+msgstr "ШЄШ«ШЁЩЉШЄ ШўЩ„ЩЉ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Raw printer"
-msgstr "Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ…"
+msgid "Network Configuration Wizard"
+msgstr "Щ…Ш№Ш§Щ„Ш¬ ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Ш§ЩЃШ№Щ„Щ‡Ш§!"
+msgid "Removable media automounting"
+msgstr "Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШўЩ„ЩЉ Щ„Щ„Щ€ШіШ§Ш¦Ш· Ш§Щ„Щ‚Ш§ШЁЩ„Ш© Щ„Щ„ШҐШІШ§Щ„Ш©"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../services.pm:1
 #, c-format
-msgid "Close"
-msgstr "ШҐШєЩ„Ш§Щ‚"
+msgid "Printing"
+msgstr "Ш§Щ„Ш·ШЁШ§Ш№Ш©"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Unkown driver"
+msgstr "Щ…ШґШєЩ„ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш© %s\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ№ШЇЩЉЩ„ ШЄЩ„Щѓ Ш§Щ„Ш·Ш§ШЁШ№Ш©Шџ"
+"There are no printers found which are directly connected to your machine"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Щ„Ш№Ш«Щ€Ш± Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш§ШЄ Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Modify printer configuration"
-msgstr "ШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Create a new partition"
+msgstr "Ш§Щ†ШґШ¦ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Add a new printer"
-msgstr "ШЈШ¶ЩЃ Ш·Ш§ШЁШ№Ш© Ш¬ШЇЩЉШЇШ©"
+msgid "Driver:"
+msgstr "Ш§Щ„Щ…ШґШєЩ„:"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+# ../../standalone/harddrake2:1, c-format
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Normal Mode"
-msgstr "Щ€Ш¶Ш№ Ш№Ш§ШЇЩЉ"
+msgid "unknown"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Change the printing system"
-msgstr "ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©"
+msgid "Use fdisk"
+msgstr "Ш§ШіШЄШ®ШЇЩ… fdisk"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CUPS configuration"
-msgstr "CUPS ШЄЩ‡ЩЉШ¦Ш©"
+msgid "MOVE YOUR WHEEL!"
+msgstr "Ш­Ш±Щѓ Ш№Ш¬Щ„Ш© Ш§Щ„ЩЃШЈШ±Ш©!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr "ШЈШ№ШЇ ШЄШ­Щ…ЩЉЩ„ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ (Щ„Ш№Ш±Ш¶ ЩѓЩ„ Ш·Ш§ШЁШ№Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©)"
+msgid "sent: "
+msgstr "Щ…ЩЏШ±ШіЩ„: "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Display all available remote CUPS printers"
-msgstr "Ш§Ш№Ш±Ш¶ ЩѓЩ„ Ш·Ш§ШЁШ№Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid "Automatic IP"
+msgstr "Automatic IP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
-"ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўШЄЩЉШ©. Ш§Щ†Щ‚Ш± Щ†Щ‚Ш±Ш© Щ…ШІШЇЩ€Ш¬Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ„ШЄШєЩЉЩЉШ± Ш§Ш№ШЇШ§ШЇШ§ШЄЩ‡Ш§ "
-"Щ„Ш¬Ш№Щ„Щ‡Ш§ Ш·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© ШЈЩ€ Щ„Ш±Ш¤ЩЉШ© Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„Щ‡Ш§."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Printing system: "
-msgstr "Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©: "
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш«ШЁЩ‘ШЄШ©..."
+msgid "Configuration of a remote printer"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing Foomatic..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Foomatic..."
+msgid "Moldova"
+msgstr "Щ…Щ€Щ„ШЇЩ€ЩЃШ§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ШЄШ№Ш°Ш±ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\"!"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Щ…ШіШ­ Ш§Щ„ШґШ±ЩЉШ· Щ‚ШЁЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ..."
+msgid "An online platform to respond to enterprise support needs."
+msgstr "ШЁЩЉШ¦Ш© Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ„Щ„ШҐШіШЄШ¬Ш§ШЁШ© Щ„Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄ Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Щ„Щ„ШґШ±ЩѓШ§ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©..."
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉШЁШЇШЈ Ш§Щ„Ш№Щ†Щ€Ш§Щ† ШЁЩЂ 'ftp:' ШЈЩ€ 'http:'"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ШЈЩЉ Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© ШЄШ±ЩЉШЇ ШЈЩ† ШЄШіШЄШ®ШЇЩ…Шџ"
+msgid "Add a new rule at the end"
+msgstr "ШЈШ¶ЩЃ Щ‚Ш§Ш№ШЇШ© Ш¬ШЇЩЉШЇШ© ЩЃЩЉ Ш§Щ„Щ†Щ‡Ш§ЩЉШ©"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Ш§Ш®ШЄШ± Printer Spooler"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ШЈЩ† ШЄЩ‚Ш±Ш± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЁШ№ЩЉШЇШ© ШЈЩ† "
+"ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© ШўЩ„ЩЉШ§Щ‹ Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Setting Default Printer..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш·Ш§ШЎ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ„Щ€Ш­ШЇШ© %s.\n"
+"Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ЩЃЩЉ Щ‡ЩЉШ¦Ш© ``name=value name2=value2 ...'' \n"
+"Щ…Ш«Щ„Ш§, ``io=0x300 irq=7''"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Installing %s ..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ %s ..."
+msgid "Quit without writing the partition table?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш®Ш±Щ€Ш¬ ШЁШЇЩ€Щ† ЩѓШЄШ§ШЁШ© Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Removing %s ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш­Ш°ЩЃ %s ..."
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© (%s) Щ„Щ† ЩЉШЄЩ… ШЁШЇШ¤Щ‡ ШЁШґЩѓЩ„ ШўЩ„ЩЉ Ш№Щ†ШЇ ШЁШЇШЎ ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©.\n"
-"\n"
-"Щ…Щ† Ш§Щ„Щ…Щ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Щ‚ШЇ ШЄЩ… ШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЁШЇШЎ Ш§Щ„ШўЩ„ЩЉ ШЁШіШЁШЁ Ш§Щ„ШЄШєЩЉЩЉШ± Ш§Щ„Щ‰ Щ…ШіШЄЩ€Щ‰ ШЈШ№Щ„Щ‰ Щ„ШЈЩ† "
-"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ‚ШЇ ЩЉЩѓЩ€Щ† Щ†Щ‚Ш·Ш© Щ…ШЁШЇШ¦ЩЉШ© Щ„Щ‡Ш¬Щ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†.\n"
-"\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШЁШЇШЎ Ш§Щ„ШўЩ„ЩЉ Щ„Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰Шџ"
+msgid "Installing packages..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ±ЩѓЩЉШЁ Ш§Щ„Ш¬ШІЩ…..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ШЁШЇШЎ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Dutch"
+msgstr "Ш§Щ„Щ‡Щ€Щ„Щ†ШЇЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
-msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄШ«ШЁЩЉШЄ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© %s Ш№Щ„Щ‰ Щ†ШёШ§Щ… ЩЉШ№Щ…Щ„ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ %s.\n"
-"Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЉШґШєЩ‘Щ„ Щ…Ш±Ш§Щ‚ШЁ (Ш№Щ…Щ„ЩЉШ© Ш®Щ„ЩЃЩЉШ©) ЩЉЩ‚Щ€Щ… ШЁШ§Щ†ШЄШёШ§Ш± Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ€ ЩЉШЄШ№Ш§Щ…Щ„ "
-"Щ…Ш№Щ‡Ш§. Щ‡Ш°Ш§ Ш§Щ„Щ…Ш±Ш§Щ‚ШЁ ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡ Ш№Щ† Щ…Щ† Щ‚ЩђШЁЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ€ "
-"Щ„Ш°Ш§ ЩЃЩ‚ШЇ ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Щ†Щ‚Ш·Ш© Щ…ШЁШЇШ¦ЩЉШ© Щ„Щ‡Ш¬Щ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†. Щ„Щ‡Ш°Ш§ ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ‚Щ„ЩЉЩ„ Щ…Щ† "
-"Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ Щ„ШЄШґШєЩЉЩ„Щ‡Ш§ Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ.\n"
-"\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©Шџ"
+msgid "The following packages need to be installed:\n"
+msgstr "ЩЉШ¬ШЁ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©:\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© ЩЃЩЉ Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ† %s"
+msgid "Angola"
+msgstr "ШЈЩ†ШєЩ€Щ„Ш§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "paranoid"
-msgstr "Щ…Ш±ШЄЩЃШ№ ШЁШ¬Щ†Щ€Щ†"
+msgid "service setting"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "high"
-msgstr "Щ…Ш±ШЄЩЃШ№"
+msgid "Custom"
+msgstr "Щ…Ш®ШµШµ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Restarting printing system..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…Щ„ЩЃ Щ…ШіШЄШ®ШЇЩ… Щ…Щ† loopback ШЈШ®Ш±Щ‰, Ш§Ш®ШЄШ± Щ…Щ„ЩЃШ§ ШўШ®Ш±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Configuration of a remote printer"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©"
+msgid "Read-only"
+msgstr "Щ„Щ„Щ‚Ш±Ш§ШЎШ© ЩЃЩ‚Ш·"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Щ„Ш§ШЄЩЃЩЉШ§"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "No known driver"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…Ш№Ш±Щ€ЩЃ"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
-"Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ„Ш§ ЩЉШ№Щ…Щ„ Щ€ Щ„Щ… ЩЉЩ…ЩѓЩ† ШЁШЇШ¤Щ‡. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Щ„ШЇЩЉЩѓ Щ€ Ш§Щ„Ш№ШЄШ§ШЇ "
-"Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Ш«Щ… Ш­Ш§Щ€Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ© Щ…Ш±Ш© ШЈШ®Ш±Щ‰."
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ‡Ш°Щ‡ Щ‡ЩЉ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§, ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
-"Щ„Ш§ ЩЉЩ…ЩѓЩ† ШЁШЇШЎ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШЄЩ… Ш№Щ…Щ„Щ‡Ш§ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ†. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Ш§Ш°Ш§ ЩѓШ§Щ† "
-"ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© ШЁШ№ШЇ  Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„Щ†ШёШ§Щ… Щ€ ШµШ­Щ‘Ш­ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… "
-"Mandrake ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ\"/\"Ш§Щ„Щ€ШµЩ„Ш§ШЄ\", Щ€ ШЁШ№ШЇ Ш°Щ„Щѓ Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©, ЩѓШ°Щ„Щѓ ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш№ШЄШ§ШЇ\"/\"Ш§Щ„Ш·Ш§ШЁШ№Ш©\""
+"ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш© Щ…Щ† "
+"Щ„ЩЉЩ†ЩѓШі Щ…Щ€ШµЩ€Щ„Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.\n"
+"\n"
+"\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШІЩЉШ§Ш±Ш© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ШЇШ№Щ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Ш§ Ш№Щ„Щ‰:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Configure the network now"
-msgstr "Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
+msgid "Configure Local Area Network..."
+msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Go on without configuring the network"
-msgstr "ШЄШ§ШЁШ№ ШЇЩ€Щ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
+msgid "Launch the sound system on your machine"
+msgstr "ЩЉШґШєЩ„ Щ†ШёШ§Щ… Ш§Щ„ШµЩ€ШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© ШЁШ№ЩЉШЇШ©. Щ‡Ш°Ш§ ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЈЩ† ШЄЩѓЩ€Щ† Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ© ШЄШ№Щ…Щ„ Щ€ Щ„ЩѓЩ† "
-"Ш§Щ„ШґШЁЩѓШ© Щ„Щ… ЩЉШЄЩ… Ш§Ш№ШЇШ§ШЇЩ‡Ш§ Ш­ШЄЩ‰ Ш§Щ„ШўЩ†. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© ШЇЩ€Щ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©, "
-"ШіШЄЩѓЩ€Щ† Щ‚Ш§ШЇШ±Ш§Щ‹ Ш№Щ„Щ‰ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ‚Ш©Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш§Щ„ШўЩ†. ЩѓЩЉЩЃ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©Шџ"
+msgid "Preparing printer database..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Ш¶ЩЉШ± Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Network functionality not configured"
-msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ­ШЇЩЉШЇ Щ€ШёЩЉЩЃЩЉШ© Ш§Щ„ШґШЁЩѓШ©"
+msgid "Information"
+msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Starting network..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЁШЇШЎ Ш§Щ„ШґШЁЩѓШ©..."
+msgid "No network card"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЁШ·Ш§Щ‚Ш© ШґШЁЩѓШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Refreshing printer data..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШ­Щ…ЩЉЩ„ ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ©..."
+msgid "Which filesystem do you want?"
+msgstr "ШЈЩЉ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ ШЄШ±ЩЉШЇШџ"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 ШЈШІШ±Ш§Ш±"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Detailed information"
+msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Щ…ЩЃШµЩ‘Щ„Ш©"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Malta"
+msgstr "Щ…Ш§Щ„Ш·Ш©"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
 msgstr ""
-"Щ„Щ‚ШЇ Щ‚Щ…ШЄ ШЁЩ†Щ‚Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШіШ§ШЁЩ‚Ш© (\"%s\"), Щ‡Щ„ ЩЉШ¬ШЁ ШЈЩЉШ¶Ш§Щ‹ ШЈЩ† ШЄЩѓЩ€Щ† "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© ШЄШ­ШЄ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Ш¬ШЇЩЉШЇ %sШџ"
+"Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©\n"
+"\n"
+"ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Щ„ШЄШЈЩѓШЇ Ш§Ш°Ш§ ЩѓШ§Щ† Ш­Ш¬Щ… Ш§Щ„ШµЩЃШ­Ш© Щ€ Щ†Щ€Ш№ Ш§Щ„Ш­ШЁШ±/Щ€Ш¶Ш№ Ш§Щ„Ш·ШЁШ§Ш№Ш© (Ш§Щ† Щ€Ш¬ШЇ) ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© "
+"Ш§Щ„Щ‰ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ„ЩЉШІШ± (Ш§Щ„Ш°Ш§ЩѓШ±Ш©, Щ€Ш­ШЇШ§ШЄ Ш§Щ„ШЇЩ€ШЁЩ„ЩѓШі, Ш§Щ„Щ…Щ†ШµШ§ШЄ "
+"Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©) Щ…Ш№ШЇЩ‘Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­. Щ„Ш§Ш­Шё ШЈЩ† Ш¬Щ€ШЇШ© Ш·ШЁШ§Ш№Ш© Ш№Ш§Щ„ЩЉШ© Ш¬ШЇШ§Щ‹ Щ‚ШЇ ШЄШ¬Щ‡Щ„ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЁШ·ЩЉШ¦Ш©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Щ†Щ‚Щ„ ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "This floppy is not FAT formatted"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† ШєЩЉШ± Щ…Ш¬Щ‡ШІ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ %s..."
+msgid "Configuring network"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ©"
+msgid "Graphic Card"
+msgstr "ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
-msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹,\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§Шџ"
+msgid "Resizing Windows partition"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… ШЄШ¬ШІШ¦Ш© Windows"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш­Ш±Щ€ЩЃ Щ€ ШЈШ±Щ‚Ш§Щ… Щ€ ШґШ§Ш±Ш·Ш§ШЄ ШЄШ­ШЄЩЉШ©"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS Ш§Щ„ШЈЩ€Щ„ Щ„Щ„Щ…Щ€ЩЃШ± (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Transfer"
-msgstr "Ш§Щ†Щ‚Щ„"
+msgid "Cameroon"
+msgstr "Ш§Щ„ЩѓШ§Щ…ЩЉШ±Щ€Щ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
 msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…ШіЩ…Ш§Ш© \"%s\" Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§ ШЄШ­ШЄ %s. \n"
-"Ш§Щ†Щ‚Ш± \"Ш§Щ†Щ‚Щ„\" Щ„Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚Щ‡.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ЩѓШЄШ§ШЁШ© Ш§ШіЩ… Ш¬ШЇЩЉШЇ ШЈЩ€ ШЄШ­Ш·ЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† ШЄШ¬ШІШ¦Ш© %s.\n"
+"Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ Щ„Ш§ ШЄЩ†ШіЩ‰ Ш§Щ„Ш­ЩЃШё ШЁШ§ШіШЄШ®ШЇШ§Щ… `w'"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Do not transfer printers"
-msgstr "Щ„Ш§ ШЄЩ†Щ‚Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
+msgid "Close"
+msgstr "ШҐШєЩ„Ш§Щ‚"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"\n"
-"Ш№Щ„Щ‘Щ… Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Ш§ Ш«Щ… Ш§Щ†Щ‚Ш± \n"
-"\"Ш§Щ†Щ‚Щ„\"."
+"\"%s\": ШЄШЈЩѓШЇ Щ…Щ† Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШЁЩ„ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ЩЃЩЉ Щ‡Ш°Ш§\n"
+"Ш§Щ„ШЁЩ„ШЇ, Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"%s\" Щ€ Ш§Ш®ШЄШ± ШЁЩ„ШЇШ§Щ‹ ШўШ®Ш±. Ш§Ш°Ш§ Щ„Щѓ ШЄЩѓЩ†\n"
+"ШЁЩ„ШЇЩѓ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Ш¶ШєШ· ШІШ± \"Ш§Щ„Щ…ШІЩЉШЇ\" Щ„ШҐШёЩ‡Ш± Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш©\n"
+"ШЁШ§Щ„ШЁЩ„ШЇШ§Щ†."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "Ш§Щ„ШЄЩ‚Щ€ЩЉЩ…"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
-"\n"
-"ШЈЩЉШ¶Ш§Щ‹ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ‡ЩЉШ¦Ш© ШЁЩ…Щ„ЩЃШ§ШЄ PPD Щ…Щ† Щ…ШµЩ†Щ‘Ш№ЩЉЩ‡Ш§ ШЈЩ€ ШЁЩ…ШґШєЩ„Ш§ШЄ CUPS Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§ Щ„Ш§ "
-"ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„Щ‡Ш§."
+"Ш§ШіШЄШ№ШЇ Щ…ШЇШ®Щ„\n"
+"Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє Ш§Щ„Щ…Ш®ШЄШ§Ш±"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
-"ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш°Щ„Щѓ, ЩЃШҐЩ† Ш§Щ„ШµЩЃЩ€ЩЃ Ш§Щ„ШЄЩЉ Щ„Щ… ЩЉШЄЩ… Ш№Щ…Щ„Щ‡Ш§ ШЁЩ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш­ ШЈЩ€ \"foomatic-"
-"configure\" Щ„Ш§ ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„Щ‡Ш§."
+"Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш© lpd ШЁШ№ЩЉШЇШ©, Ш№Щ„ЩЉЩѓ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© "
+"Ш№Щ„Щ‰ Ш°Щ„Щѓ Ш§Щ„Ш®Ш§ШЇЩ…."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD Щ€ LPRng Щ„Ш§ ШЄШЇШ№Щ… Ш·Ш§ШЁШ№Ш§ШЄ IPP.\n"
+msgid "Iceland"
+msgstr "ШўЩЉШіЩ„Щ†ШЇШ§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ ЩЉШЇШ№Щ… ЩЃЩ‚Ш· Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ€ Ш·Ш§ШЁШ№Ш§ШЄ LPD Ш§Щ„ШЁШ№ЩЉШЇШ© Щ€ Ш·Ш§ШЁШ№Ш§ШЄ Socket/TCP.\n"
+msgid "consolehelper missing"
+msgstr "consolehelper missing"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
-"CUPS Щ„Ш§ ЩЉШЇШ№Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ ШЈШ¬Щ‡ШІШ© Novell Ш§Щ„Ш®Ш§ШЇЩ…Ш© ШЈЩ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ШіЩ„ "
-"Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ‰ ШЈЩ…Ш± Ш­Ш±.\n"
+msgid "stopped"
+msgstr "Щ…ШЄЩ€Щ‚ЩЃШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Щ†Щ‚Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ… Ш№Щ…Щ„Щ‡Ш§ Щ„Щ„ЩЂSpooler %s Ш§Щ„Щ‰ %s, Ш§Щ„ЩЂspooler "
-"Ш§Щ„Ш­Ш§Щ„ЩЉ. ЩѓЩ„ ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© (Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Щ€ШµЩЃ, Ш§Щ„Щ…ЩѓШ§Щ†, Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш©, Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ "
-"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ) ЩЉШЄЩ… ШЈШ®Ш°Щ‡Ш§, Щ„ЩѓЩ† Щ„Щ† ЩЉШЄЩ… Щ†Щ‚Щ„ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ.\n"
-"Щ„Ш§ ЩЉЩ…ЩѓЩ† Щ†Щ‚Щ„ ЩѓЩ„ Ш§Щ„ШµЩЃЩ€ЩЃ Щ„Щ„ШЈШіШЁШ§ШЁ Ш§Щ„ШЄШ§Щ„ЩЉШ©:\n"
+msgid "Whether the FPU has an irq vector"
+msgstr "Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„ЩЂFPU Щ„ШЇЩЉЩ‡ Щ…ШЄШ¬Щ‡ IRQ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
-"ШЄЩ… ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш© ШўЩ„ЩЉШ§Щ‹ Щ„ЩѓЩЉ ШЄШ№Ш·ЩЉЩѓ Ш§Щ„Щ‚ШЇШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШіЩ€Ш§Щ‚Ш§ШЄ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШµЩ€Ш± "
-"Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ Ш§Щ„ШґШ®ШµЩЉ. ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШµЩ€Ш± ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ "
-"Ш§Щ„Ш±ШіЩ€Щ…ЩЉ \"MToolsFM\" (Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©: \"ШЄШ·ШЁЩЉЩ‚Ш§ШЄ\" -> \"ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ\" -> \"Щ…ШЇЩЉШ± "
-"Щ…Щ„ЩЃШ§ШЄ MTools\") ШЈЩ€ ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЈШЇЩ€Ш§ШЄ \"mtools\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± (ШЈШЇШ®Щ„ \"man "
-"mtools\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ„Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ). ЩЉЩ…ЩѓЩ†Щѓ Ш§ЩЉШ¬Ш§ШЇ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШЁШ·Ш§Щ‚Ш© "
-"ШЄШ­ШЄ Ш­Ш±ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш© \"p:\", ШЈЩ€ Ш­Ш±Щ€ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Ш·Ш§ШЁШ№Ш© "
-"HP Щ…Ш№ ШіЩ€Ш§Щ‚Ш§ШЄ ШЁШ·Ш§Щ‚Ш§ШЄ ШµЩ€Ш±. ЩЃЩЉ \"MToolsFM\" ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ­Щ€ЩЉЩ„ ШЁЩЉЩ† Ш­Ш±Щ€ЩЃ Ш§Щ„ШіЩ€Ш§Щ‚Ш§ШЄ Ш№Щ„Щ‰ "
-"Ш§Щ„Ш­Щ‚Щ„ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„Щ‰ Ш§Щ„ШЈШ№Щ„Щ‰ ЩЃЩЉ Щ‚Щ€Ш§Ш¦Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ."
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Expand Tree"
+msgstr "Expand Tree"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
+"The old \"%s\" driver is blacklisted.\n"
 "\n"
-"Do not use \"scannerdrake\" for this device!"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
-"Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЄЩ… ШЄЩ‡ЩЉШ¦ШЄЩ‡ ШўЩ„ЩЉШ§Щ‹ Щ„ЩЉШЄЩ…ЩѓЩ† Щ…Щ† Ш§Щ„Щ…ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ. ЩЉЩ…ЩѓЩ†Щѓ "
-"Ш§Щ„ШўЩ† Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…ШіШ® Ш§Щ„Ш¶Щ€Ш¦ЩЉ ШЁШ§ШіШЄШ®ШЇШ§Щ… \"scanimage\" (\"scanimage -d hp:%s\" "
-"Щ„ШЄШ­ШЇЩЉШЇ Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ Ш§Ш°Ш§ ЩѓШ§Щ† Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Щ€Ш§Ш­ШЇ) Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± ШЈЩ€ ШЁШ§Щ„ШЁШ±Ш§Щ…Ш¬ "
-"Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ© \"xscanimage\" ШЈЩ€ \"xsane\". Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… GIMP, ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ Ш§Щ„Щ…ШіШ­ "
-"Ш§Щ„Ш¶Щ€Ш¦ЩЉ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ‚Щ€Ш§Ш¦Щ… \"File\"/\"Acquire\". ШґШєЩ„ Ш§Щ„ШЈЩ…Ш± \"man scanimage\" ЩЃЩЉ "
-"ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ.\n"
+"Щ…ШґШєЩ„ \"%s\" Ш§Щ„Щ‚ШЇЩЉЩ… Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШіЩ€ШЇШ§ШЎ.\n"
 "\n"
-"Щ„Ш§ ШЄШіШЄШ®ШЇЩ… \"scannerdrake\" Щ„Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ!"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printing test page(s)..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш·ШЁШ§Ш№Ш© Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ©..."
+"ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„Ш­Ш§Щ„Ш§ШЄ Щ‚ЩЉЩ„ ШЈЩ†Щ‡ ЩЉШіШЁШЁ Ш§Щ†Щ‡ЩЉШ§Ш± ЩЃЩЉ Ш§Щ„Щ†Щ€Ш§Ш© Ш№Щ†ШЇ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„.\n"
+"\n"
+"Щ…ШґШєЩ„ \"%s\" Ш§Щ„Ш¬ШЇЩЉШЇ ШіЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Ш№Щ†ШЇ ШЄШґШєЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§Щ„Щ‚Ш§ШЇЩ…Ш©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Print option list"
-msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Expert Mode"
+msgstr "Щ€Ш¶Ш№ЩЉШ© Ш§Щ„Ш®ШЁЩЉШ±"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
+msgid "Printer options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Printing/Photo Card Access on \"%s\""
+msgid "Local Network adress"
+msgstr "Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш©/Ш§Щ„Щ…ШіШ­ Ш№Щ„Щ‰ \"%s\""
+msgid "Backup your System files. (/etc directory)"
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…: (ШЇЩ„ЩЉЩ„ /etc)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Printing/Scanning/Photo Cards on \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
 msgstr ""
-"Щ„Щ„Щ…Ш№Ш±ЩЃШ© Ш­Щ€Щ„ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©, ШҐЩ…Ш§ ШЈЩ† ШЄЩ‚Ш±ШЈ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШЇЩ†Ш§Щ‡ Щ€ "
-"Ш§Щ†Щ‚Ш± \"Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©\".%s%s\n"
+"ШЄШіШЄШ·ЩЉШ№ Ш§Щ„ШўЩ† ШЄЩ†ШІЩЉЩ„ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш­ШЇЩ‘Ш«Ш©. Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…\n"
+"ШЄЩ… ШЄШ­ШЇЩЉШ«Щ‡Ш§ ШЁШ№ШЇ Ш§ШµШЇШ§Ш± Ш§Щ„ШЄЩ€ШІЩЉШ№Ш©. Щ‚ШЇ\n"
+"ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Ш§ШµЩ„Ш§Ш­Ш§ШЄ ШЈЩ…Щ†ЩЉШ© ШЈЩ€ Ш§ШµЩ„Ш§Ш­Ш§ШЄ Щ„Ш№ЩЉЩ€ШЁ ШЁШ±Щ…Ш¬ЩЉШ©.\n"
+"\n"
+"Щ„ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…, ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ Ш§ШЄШµШ§Щ„ \n"
+"ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
 "\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Samba Server"
+msgstr "Ш®Ш§ШЇЩ… Samba"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg, alert=1)\n"
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
 msgstr ""
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Ш§Щ„ШЈЩ€Ш§Щ…Ш± \"%s\" Щ€ \"%s\" ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ€ШёЩЉЩЃШ© Ш·ШЁШ§Ш№Ш© Щ…Ш­ШЇШЇШ©. "
-"ШЁШЁШіШ§Ш·Ш© Щ‚Щ… ШЁШҐШ¶Ш§ЩЃШ© Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш§Щ„Щ‰ ШіШ·Ш± Ш§Щ„ШўЩ€Ш§Щ…Ш±, Щ…Ш«Ш§Щ„ \"%s <file>\".\n"
+"Enable/Disable IP spoofing protection."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Ш±ШіЩ€Щ…ЩЉ \"xpdq\" Щ„ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ€ Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ "
-"Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш©.\n"
-"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ№Щ…ШЁ ЩѓЩЉШЇЩЉ ЩѓШЁЩЉШ¦Ш© ШіШ·Ш­ Щ…ЩѓШЄШЁ ЩЃЩ„ШЇЩЉЩѓ ШЈЩЉЩ‚Щ€Щ†Ш© \"Щ„Щ„Ш·Щ€Ш§Ш±Ш¦\", Ш§ШіЩ…Щ‡Ш§ \"STOP "
-"Printer!\", ШЄЩ‚Щ€Щ… ШЁШҐЩЉЩ‚Ш§ЩЃ ЩѓЩ„ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЃЩ€Ш±Ш§Щ‹ Ш№Щ†ШЇ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„ЩЉЩ‡Ш§. Щ‡Ш°Ш§ Ш§Щ„Щ…Ш«Ш§Щ„ "
-"Щ…ЩЃЩЉШЇ Щ„Щ„Ш­Ш§Щ„Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ­ШµЩ„ ЩЃЩЉЩ‡Ш§ ШЄШ№Ш«Ш± ЩЃЩЉ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ€Ш±Щ‚.\n"
+msgid "Australian Optus cable TV"
+msgstr "Australian Optus cable TV"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„ШЈЩ…Ш± ШЈЩЉШ¶Ш§Щ‹ ЩЃЩЉ Ш­Щ‚Щ„ \"ШЈЩ…Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш©\" ЩЃЩЉ Щ…Ш±ШЁШ№Ш§ШЄ Ш­Щ€Ш§Ш± Ш§Щ„Ш·Ш§ШЁШ№Ш© "
-"ЩЃЩЉ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ. Щ„ЩѓЩ† Щ‡Щ†Ш§ Щ„Ш§ ШЄЩ‚Щ… ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…Щ„ЩЃ Щ„ШЈЩ† Щ…Щ„ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЉШЄЩ… "
-"ШЄЩ€ЩЃЩЉШ±Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„ШЄШ·ШЁЩЉЩ‚.\n"
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr "Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЈЩ…Ш± \"%s <file> ШЈЩ€ \"%s <file>\".\n"
+msgid "Subnet:"
+msgstr "Subnet:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
-"Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"Щ‚Ш§Ш¦Щ…Ш© "
-"Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©\"."
+msgid "Zimbabwe"
+msgstr "ШІЩЉЩ…ШЁШ§ШЁЩ€ЩЉ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
-msgstr ""
-"\n"
-"Ш§Щ„ШЈЩ…Ш± \"%s\" ЩЉШіЩ…Ш­ Щ„Щѓ ЩѓШ°Щ„Щѓ ЩЉШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ€ШёЩЉЩЃШ© Ш·ШЁШ§Ш№Ш© Щ…Ш­ШЇШЇШ©. ШЁЩѓЩ„ "
-"ШЁШіШ§Ш·Ш© ШЈШ¶ЩЃ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш§Щ„Щ‰ ШіШ·Ш± Ш§Щ„ШўЩ€Ш§Щ…Ш±, Щ…Ш«Ш§Щ„ \"%s <file>\". "
+msgid "Please enter the host name or IP."
+msgstr "ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr "Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± \"%s <file>\".\n"
+msgid "When"
+msgstr "Щ…ШЄЩ‰ "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "Ш®Ш§ШЇЩ… DNS Ш§Щ„Ш«Ш§Щ†ЩЉ (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ)"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "ЩЃЩ†Щ„Щ†ШЇШ§"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
+"Arguments: (arg)\n"
 "\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
-"Щ‡Ш°Щ‡ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©:\n"
+"Arguments: (arg)\n"
 "\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ€Ш§Щ…Ш± ШЈЩЉШ¶Ш§Щ‹ ЩЃЩЉ Ш­Щ‚Щ„ \"ШЈЩ…Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш©\" ЩЃЩЉ Щ…Ш±ШЁШ№Ш§ШЄ Ш­Щ€Ш§Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш© "
-"ЩЃЩЉ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ, Щ„ЩѓЩ† Щ„Ш§ ШЄЩ‚Щ… Щ‡Щ†Ш§ ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…Щ„ЩЃ Щ„ШЈЩ† Ш§Щ„Щ…Щ„ЩЃ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ "
-"Ш·ШЁШ§Ш№ШЄЩ‡ ЩЉШЄЩ… Ш§Ш№Ш·Ш§Ш¤Щ‡ Щ…Щ† Щ‚ШЁЩ„ Ш§Щ„ШЄШ·ШЁЩЉЩ‚.\n"
+msgid "Color depth: %s\n"
+msgstr "Ш№Щ…Щ‚ Ш§Щ„ШЈЩ„Щ€Ш§Щ†: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
-msgstr ""
-"Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШіШЄШ®ШЇЩ… Ш§Щ„ШЈЩ…Ш± \"%s <file>\" ШЈЩ€ ШЈЩ† ШЄШіШЄШ®ШЇЩ… "
-"ШЈШЇШ§Ш© Ш·ШЁШ§Ш№Ш© Ш±ШіЩ€Щ…ЩЉШ©: \"xpp <file>\" ШЈЩ€ \"kprinter <file>\". Ш§Щ„ШЈШЇЩ€Ш§ШЄ Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ© "
-"ШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ€ ШЄШ№ШЇЩЉЩ„ Ш®ЩЉШ§Ш±Ш§ШЄЩ‡Ш§ ШЁШіЩ‡Щ€Щ„Ш©.\n"
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©. ЩЉШ¬ШЁ ШЄШ±Щ‚ЩЉШЄЩ‡Ш§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr "Щ‡Щ„ Ш№Щ…Щ„ШЄ ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­Шџ"
+msgid "Loading from floppy"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
-"ШЄЩ… Ш§Ш±ШіШ§Щ„ Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
-"Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Ш­ШЄЩ‰ ШЄШЁШЇШЈ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"ЩЉЩЏШіШЄШ®ШЇЩ… Drakperm Щ„Ш§ШіШЄШ№Ш±Ш§Ш¶ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ШЄШ№ШЇЩЉЩ„ Ш§Щ„ШµЩ„Ш§Ш­ЩЉШ§ШЄ, Щ€ "
+"Ш§Щ„Щ…Щ„Ш§Щѓ Щ€ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁШ§ШіШЄШ®ШЇШ§Щ… msec.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ШЄШ­Ш±ЩЉШ± Щ‚Щ€Ш§Ш№ШЇЩѓ Ш§Щ„Ш®Ш§ШµШ© Ш§Щ„ШЄЩЉ ШіШЄЩЏЩѓШЄЩЋШЁ ЩЃЩ€Щ‚ Ш§Щ„Щ‚Щ€Ш§Щ‡ШЇ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"ШЄЩ… Ш§Ш±ШіШ§Щ„ Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
-"Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Ш­ШЄЩ‰ ШЄШЁШЇШЈ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
-"Ш­Ш§Щ„Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш©:\n"
-"%s\n"
-"\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do not print any test page"
-msgstr "Щ„Ш§ ШЄШ·ШЁШ№ ШЈЩЉ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
+msgid "Slovenia"
+msgstr "ШіЩ„Щ€ЩЃЩЉЩ†ЩЉШ§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Photo test page"
-msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© Щ„ШµЩ€Ш±Ш©"
+msgid ""
+"Enter a user\n"
+"%s"
+msgstr ""
+"ШЈШЇШ®Щ„ Щ…ШіШЄШ®ШЇЩ…\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Alternative test page (A4)"
-msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© ШЁШЇЩЉЩ„Ш© (A4)"
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
+"- ШЈШ¬Щ‡ШІШ© PCI Щ€ USB: Щ‡Ш°Ш§ ЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШµЩ†Ш№ЩЉЩ† Щ€ Ш§Щ„ШЈШ¬Щ‡ШІШ© Щ€ Ш§Щ„Щ…ШµЩ†Ш№ЩЉЩ† Ш§Щ„Ш«Ш§Щ†Щ€ЩЉЩЉЩ† Щ€ "
+"Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш«Ш§Щ†Щ€ЩЉШ© Щ„Щ‡Щ€ЩЉШ§ШЄ PCI/USB"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Alternative test page (Letter)"
-msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© ШЁШЇЩЉЩ„Ш© (Letter)"
+msgid "ProgressBar color selection"
+msgstr "ШҐШ®ШЄЩЉШ§Ш± Щ„Щ€Щ† ШґШ±ЩЉШ· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Standard test page"
-msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© Щ‚ЩЉШ§ШіЩЉШ©"
+msgid ""
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
+msgstr ""
+"Щ‡Ш§ Щ‡Щ†Ш§ Ш§Щ„Щ…ШЇШ®Щ„Ш§ШЄ Ш§Щ„Щ…Ш®ШЄЩ„ЩЃШ©.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш¶Ш§ЩЃШ© Щ…ШЇШ®Щ„Ш§ШЄ ШЈШ®Ш±Щ‰ ШЈЩ€ ШЄШєЩЉЩЉШ± Ш§Щ„Щ…Щ€Ш¬Щ€ШЇЩЉЩ†."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Print"
-msgstr "ШҐШ·ШЁШ№"
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "No test pages"
-msgstr "Щ„Ш§ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„ШЄЩЉ ШЄЩ€ШЇ Ш·ШЁШ§Ш№ШЄЩ‡Ш§.\n"
-"Щ…Щ„Ш­Щ€ШёШ©: Ш§Щ„ШµЩЃШ­Ш© Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Щ„ШµЩ€Ш±Ш© ШіШЄШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ Ш·Щ€ЩЉЩ„Ш§Щ‹ Щ„Ш·ШЁШ§Ш№ШЄЩ‡Ш§ Щ€ Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш§ШЄ "
-"Ш§Щ„Щ„ЩЉШІШ± ШЁЩѓЩ…ЩЉШ© Ш°Ш§ЩѓШ±Ш© Щ‚Щ„ЩЉЩ„Ш© Щ‚ШЇ Щ„Ш§ ЩЉШЄЩ… Ш·ШЁШ§Ш№ШЄЩ‡Ш§ Щ…Ш·Щ„Щ‚Ш§Щ‹. ЩЃЩЉ ШЈШєЩ„ШЁ Ш§Щ„ШЈШ­ЩЉШ§Щ† ЩЉЩѓЩЃЩЉ ШЈЩ† "
-"ШЄШ·ШЁШ№ Ш§Щ„ШµЩЃШ­Ш© Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‚ЩЉШ§ШіЩЉШ©."
+"ШЄШґШєЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§Щ„Щ…ЩЏШ¬ШЇЩ€Щ„Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЈЩ…Ш± at Ш№Щ†ШЇ Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Щ…Ш­ШЇШЇ\n"
+"Щ„ШЄШґШєЩЉЩ„ at, Щ€ ШЄЩ‚Щ€Щ… ШЁШЄШґШєЩЉЩ„ Ш§Щ„ШЈЩ€Ш§Щ…Ш± Ш§Щ„ШЇЩ‚Ш№ЩЉШ© Ш№Щ†ШЇЩ…Ш§ ЩЉЩѓЩ€Щ† Щ…ШЄЩ€ШіШ· Ш§Щ„ШЄШ­Щ…ЩЉЩ„ Щ‚Щ„ЩЉЩ„Ш§ЩЋ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Test pages"
-msgstr "ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
+msgid "Radio support:"
+msgstr "ШЇШ№Щ… Ш§Щ„Ш±Ш§ШЇЩЉЩ€:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ№ЩЉЩЉЩ† Щ‡Ш°Щ‡  Ш§Щ„Ш·Ш§ШЁШ№Ш© (\"%s\")\n"
-"ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©Шџ"
+msgid "Installing SANE packages..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш­ШІЩ… SANE..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Option %s out of range!"
-msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s Ш®Ш§Ш±Ш¬ Ш§Щ„Щ…ШЄЩ€ШіШ·!"
+msgid "boot disk creation"
+msgstr "ШµЩ†Ш№ Щ‚Ш±Шµ Щ…Ш±Щ† Щ„ШЁШЇШЎ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ…Ш§Щ‹!"
+msgid "LDAP"
+msgstr "LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ…Ш§ ШµШ­ЩЉШ­Ш§Щ‹!"
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Printer default settings"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©"
+msgid "Change type"
+msgstr "ШєЩЉЩ‘Ш± Ш§Щ„Щ†Щ€Ш№"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "ШЄШ«ШЁЩЉШЄ SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr "Ш§ШіШЄШ®ШЇЩ… CD/DVDROM Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"Printer default settings\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
 "\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
-"Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©\n"
+"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ‚ШЇ Ш§Щ†ШЄЩ‡Щ‰.\n"
+"Ш§Ш­Ш°ЩЃ Щ€ШіЩЉШ· Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ€ Ш§Ш¶ШєШ· ШІШ± Ш§ШЇШ®Щ„ Щ„ШҐШ№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„.\n"
 "\n"
-"ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Щ„ШЄШЈЩѓШЇ Ш§Ш°Ш§ ЩѓШ§Щ† Ш­Ш¬Щ… Ш§Щ„ШµЩЃШ­Ш© Щ€ Щ†Щ€Ш№ Ш§Щ„Ш­ШЁШ±/Щ€Ш¶Ш№ Ш§Щ„Ш·ШЁШ§Ш№Ш© (Ш§Щ† Щ€Ш¬ШЇ) ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© "
-"Ш§Щ„Щ‰ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ„ЩЉШІШ± (Ш§Щ„Ш°Ш§ЩѓШ±Ш©, Щ€Ш­ШЇШ§ШЄ Ш§Щ„ШЇЩ€ШЁЩ„ЩѓШі, Ш§Щ„Щ…Щ†ШµШ§ШЄ "
-"Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©) Щ…Ш№ШЇЩ‘Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­. Щ„Ш§Ш­Шё ШЈЩ† Ш¬Щ€ШЇШ© Ш·ШЁШ§Ш№Ш© Ш№Ш§Щ„ЩЉШ© Ш¬ШЇШ§Щ‹ Щ‚ШЇ ШЄШ¬Щ‡Щ„ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЁШ·ЩЉШ¦Ш©."
+"\n"
+"Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„ Ш§Щ„ШҐШµЩ„Ш§Ш­Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Mandrake Linux,\n"
+"ШІШ± ШµЩЃШ­Ш© ШЄШµШ­ЩЉШ­ Ш§Щ„ШЈШ®Ш·Ш§ШЎ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ…Щ†:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ… Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ ЩЃШµЩ„\n"
+"Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ ШЇЩ„ЩЉЩ„ Щ…ШіШЄШ®ШЇЩ… Mandrake Ш§Щ„Ш±ШіЩ…ЩЉ."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "paranoid"
+msgstr "Щ…Ш±ШЄЩЃШ№ ШЁШ¬Щ†Щ€Щ†"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr "ШЈШ±ШіЩ„ ШЄЩ‚Ш±ЩЉШ±Ш§Щ‹ ШЁШ±ЩЉШЇЩЉШ§Щ‹ ШЁШ№ШЇ ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ® Ш§Щ„Щ‰:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„ШЈЩ…Ш± ШЈЩЉШ¶Ш§Щ‹ ЩЃЩЉ Ш­Щ‚Щ„ \"ШЈЩ…Ш± Ш§Щ„Ш·ШЁШ§Ш№Ш©\" ЩЃЩЉ Щ…Ш±ШЁШ№Ш§ШЄ Ш­Щ€Ш§Ш± Ш§Щ„Ш·Ш§ШЁШ№Ш© "
+"ЩЃЩЉ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ. Щ„ЩѓЩ† Щ‡Щ†Ш§ Щ„Ш§ ШЄЩ‚Щ… ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…Щ„ЩЃ Щ„ШЈЩ† Щ…Щ„ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЉШЄЩ… "
+"ШЄЩ€ЩЃЩЉШ±Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„ШЄШ·ШЁЩЉЩ‚.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ Lexmark Inkjet"
+msgid "Resolution"
+msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
-"Щ…ШґШєЩ„Ш§ШЄ Ш·Ш§ШЁШ№ШЄЩѓ inkjet Ш§Щ„ШЄЩЉ ШЄЩ… ШЄЩ€ЩЃЩЉШ±Щ‡Ш§ Щ…Щ† Lexmark ШЄШЇШ№Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ЩЃЩ‚Ш·, "
-"Щ„Ш§ ЩЉШЇШ№Щ… Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ШЈЩ€ Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш©. ЩЃШ¶Щ„Ш§Щ‹ Щ€ШµЩ„ "
-"Ш·Ш§ШЁШ№ШЄЩѓ Ш§Щ„Щ‰ Щ…Щ†ЩЃШ° Щ…Ш­Щ„ЩЉ ШЈЩ€ Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Ш§Щ„Щ…Ш±ШЄШЁШ·Ш© ШЁЩ‡Ш§."
+"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш·Ш§ШЁШ№Ш© SMB, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ SMB (Щ…Щ„Ш­Щ€ШёШ©! Щ‚ШЇ ЩЉЩѓЩ€Щ† "
+"Щ…Ш®ШЄЩ„ЩЃШ§Щ‹ Ш№Щ† Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP!) Щ€ Ш±ШЁЩ…Ш§ Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Ш®Ш§Шµ ШЁШ®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ "
+"Ш§ШіЩ… Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ€ШЇ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡Ш§ ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© "
+"Щ…Ш±Щ€Ш±, Щ€ Щ…Ш¬Щ…Щ€Ш№Ш© Ш№Щ…Щ„ Щ…Щ†Ш§ШіШЁШ©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
 msgstr ""
-"ШЈЩ†ШЄ ШЄЩ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© OKI laser winprinter. Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
-"ШЄШіШЄШ®ШЇЩ… ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§ШЄШµШ§Щ„Ш§ШЄ Ш®Ш§Шµ Щ€ Щ„Ш°Ш§ ЩЃЩ‡ЩЉ ШЄШ№Щ…Щ„ ЩЃЩ‚Ш· Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШЄШµЩ„Ш© ШЁШ§Щ„Щ…Щ†ЩЃШ° "
-"Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ Ш§Щ„ШЈЩ€Щ„. Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄШµЩ„Ш© ШЁЩ…Щ†ЩЃШ° ШўШ®Ш± ШЈЩ€ ШЁШ®Ш§ШЇЩ… Ш·ШЁШ§Ш№Ш© ЩЃЩ…Щ† ЩЃШ¶Щ„Щѓ "
-"Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ Ш§Щ„ШЈЩ€Щ„ Щ‚ШЁЩ„ ШЈЩ† ШЄШ·ШЁШ№ ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©. Ш§Щ† Щ„Щ… "
-"ШЄЩЃШ№Щ„ Ш°Щ„Щѓ ЩЃЩ„Щ† ШЄШ№Щ…Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Ш№ШЇШ§ШЇ Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© ШіЩЉШЄЩ… ШЄШ¬Ш§Щ‡Щ„Щ‡ Щ…Щ† Ш§Щ„Щ…ШґШєЩ‘Щ„."
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "OKI winprinter configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ OKI WinPrinter"
+msgid "reconfigure"
+msgstr "ШҐШ№ШЇШ§Ш© Ш§Щ„ШҐШ№ШЇШ§ШЇ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Ш·Ш§ШЁШ№ШЄ Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©, ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€Ш§ЩЃЩ‚Ш© (Ш§Щ†ШёШ± ШЇЩ„ЩЉЩ„  "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©) ШЈЩ€ Ш§Ш®ШЄШ± Ш·Ш§ШЁШ№Ш© Щ…Щ…Ш§Ш«Щ„Ш©."
+"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„ШЄЩ…ШЄШ№ ШЁШЇШ№Щ… Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ…Ш№ XFree %s, \n"
+"Щ„Ш§Ш­Шё ШЈЩ† Щ‡Ш°Ш§ Ш§Щ„ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ€ Щ‚ШЇ ЩЉШЄШіШЁШЁ ЩЃЩЉ Ш§ЩЉЩ‚Ш§ЩЃ Ш¬Щ‡Ш§ШІЩѓ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
-"\n"
-"\n"
-"ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Щ‚ЩЉШ§Щ… Printerdrake ШЁШ§ЩѓШЄШґШ§ЩЃ Ш·Ш±Ш§ШІ Ш·Ш§ШЁШ№ШЄЩѓ ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.  Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ "
-"Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„ШµШ­ЩЉШ­ Ш§Ш°Ш§ ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш±Ш§ШІ Ш®Ш·ШЈ ШЈЩ€ \"Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ…\"."
+msgid "Xinetd Service"
+msgstr "Ш®ШЇЩ…Ш§ШЄ Xinetd"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which printer model do you have?"
-msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ„ШЇЩЉЩѓШџ"
+msgid "access to network tools"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈШЇЩ€Ш§ШЄ Ш§Щ„ШґШЁЩѓШ©"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer model selection"
-msgstr "ШҐШ®ШЄЩЉШ§Ш± Щ€Ш­ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Firmware-Upload for HP LaserJet 1000"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Reading printer database..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ..."
+msgid ""
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
+msgstr ""
+"Mandrake Linux 9.1 ЩЉЩ…ЩѓЩ‘Щ†Щѓ Щ…Щ† Ш§ШіШЄШ®ШЇШ§Щ… ШўШ®Ш± Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ "
+"Ш§Щ„ШµЩ€ШЄЩЉШ©, Щ€ ШЄШ­Ш±ЩЉШ± Ш§Щ„ШµЩ€Ш±, Щ€ ШЄШґШєЩЉЩ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select model manually"
-msgstr "ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ†Щ‘Щ…Щ€Ш°Ш¬ ЩЉШЇЩ€ЩЉЩ‘Щ‹Ш§"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШ­Щ‚Щ‘ЩЋЩ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹. "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The model is correct"
-msgstr "Ш§Щ„Ш·Ш±Ш§ШІ ШµШ­ЩЉШ­"
+msgid ""
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
+msgstr ""
+"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ ШЄШ«ШЁЩЉШЄ aboot, \n"
+"Ш­Ш§Щ€Щ„ Ш§Щ„ШҐШ¬ШЁШ§Ш± Ш№Щ„Щ‰ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш­ШЄЩ‰ Щ€ Щ„Щ€ ШЈШЇЩЉ Ш°Щ„Щѓ Щ„ШЄШЇЩ…ЩЉШ± Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЈЩ€Щ„Щ‰Шџ"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
+"Options Description:\n"
 "\n"
-"For your printer Printerdrake has found:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
 "\n"
-"%s"
 msgstr ""
-"Щ‚Ш§Щ… Printerdrake ШЁЩ…Щ‚Ш§Ш±Щ†Ш© Ш§ШіЩ… Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„Щ†Ш§ШЄШ¬ Ш№Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…Ш№ "
-"Ш§Щ„Ш·Ш±Ш§ШІШ§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЈЩЃШ¶Щ„ ШЄЩ€Ш§ЩЃЩ‚. Щ‡Ш°Ш§ "
-"Ш§Щ„ШҐШ®ШЄЩЉШ§Ш± Щ‚ШЇ ЩЉЩѓЩ€Щ† Ш®Ш§Ш·Ш¦Ш§Щ‹, Ш®ШµЩ€ШµШ§Щ‹ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇШ© Ш§Ш·Щ„Ш§Щ‚Ш§Щ‹ ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© "
-"ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ. Щ„Ш°Ш§ ШЄШЈЩѓШЇ Ш§Ш° ЩѓШ§Щ† Ш§Ш®ШЄЩЉШ§Ш±Щѓ ШµШ­ЩЉШ­Ш§Щ‹ Щ€ Ш§Щ†Щ‚Ш± \"Ш§Щ„Ш·Ш±Ш§ШІ ШµШ­ЩЉШ­\", ШЈЩ…Ш§ "
-"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Ш§Щ„Ш·Ш§ШІ ШµШ­ЩЉШ­Ш§Щ‹, Ш§Щ†Щ‚Ш± \"Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±Ш§ШІ ЩЉШЇЩ€ЩЉШ§Щ‹\" ЩѓЩЉ ЩЉШЄШіЩ†Щ‰ Щ„Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш±Ш§ШІ "
-"Ш·Ш§ШЁШ№ШЄЩѓ ЩЉШЇЩ€ЩЉШ§Щ‹ Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©.\n"
+"options description:\n"
 "\n"
-"Щ„Ш·Ш§ШЁШ№ШЄЩѓ Щ€Ш¬ШЇ Printerdrake:\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
 "\n"
-"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Your printer model"
-msgstr "Ш·Ш±Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Ш§ШіШЄШ№ШЇ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ\n"
+"Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Preparing printer database..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ­Ш¶ЩЉШ± Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ..."
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
+"%s Щ…Щ€Ш¬Щ€ШЇ, Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃЩ‡Шџ\n"
+"\n"
+"ШЄШ­Ш°ЩЉШ±: Ш§Ш°Ш§ Щ‚Щ…ШЄ ШЁЩ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Щ…ШіШЁЩ‚Ш§Щ‹ ШєШ§Щ„ШЁШ§Щ‹\n"
+" ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ®Щ„ Щ…Щ† authorized_keys Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Location"
-msgstr "Ш§Щ„Щ…ЩѓШ§Щ†"
+msgid "Please fill or check the field below"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ…Щ„ШЈ ШЈЩ€ ШЈШґЩ‘Ш± Ш№Щ„Щ‰ Ш§Щ„Ш­Щ‚Щ„ ШЈШЇЩ†Ш§Щ‡"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Description"
-msgstr "Ш§Щ„Щ€ШµЩЃ"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­ЩЃШё ШЄШ№ШЇЩЉЩ„Ш§ШЄ /etc/fstab"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Name of printer"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Boot Protocol"
+msgstr "ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
-"ЩѓЩ„ Ш·Ш§ШЁШ№Ш© ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… (Щ…Ш«Ш§Щ„ \"printer\"). Ш­Щ‚Щ€Щ„ Ш§Щ„Щ€ШµЩЃ Щ€ Ш§Щ„Щ…ЩѓШ§Щ† Щ„ЩЉШі Щ…Щ† "
-"Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉ Щ…Щ„Ш¤Щ‡Ш§. Ш§Щ†Щ‡Ш§ Щ…Ш¬Ш±ШЇ Щ…Щ„Ш§Ш­ШёШ§ШЄ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†."
+msgid "LVM-disks %s\n"
+msgstr "ШЈЩ‚Ш±Ш§Шµ LVM %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§Щ„ШЄШ№Щ„ЩЉЩ‚Ш§ШЄ"
+msgid "The package %s is needed. Install it?"
+msgstr "Ш§Щ„Ш­ШІЩ…Ш© %s ЩЉШ¬ШЁ ШЈЩ† ШЄЩЏШ«ШЁЩ‘ШЄ. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш¬Ш№Щ„ Щ…Щ†ЩЃШ° Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€ЩЃШ±Ш§Щ‹ Щ„ЩЂCUPS..."
+msgid "On boot"
+msgstr "Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../printer/printerdrake.pm:1
+# U+200F (RTL mark) has been inserted after "Bus" so the display
+# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
+# and not "Bus: datadatadata xxxxxxxx"
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Ш¬Щ‡Ш§ШІ Щ€ ШЄЩ‡ЩЉШ¦Ш© HPOJ..."
+msgid "Bus identification"
+msgstr "معرف الـ Bus‏"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ HP Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
+msgid "Please make a backup of your data first"
+msgstr "Ш±Ш¬Ш§ШЎ Щ‚Щ… ШЁШ№Щ…Щ„ Щ†ШіШ®Ш© Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ© Щ…Щ† ШЁЩЉШ§Щ†Ш§ШЄЩѓ ШЈЩ€Щ„Ш§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Щ…ШіШ­ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ HP Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
+msgid "Vatican"
+msgstr "Ш§Щ„ЩЃШ§ШЄЩЉЩѓШ§Щ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Installing mtools packages..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш­ШІЩ… mtools"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Щ‚Ш±Шµ ШµЩ„ШЁ, ЩЃЩЉ ШЈЩЉЩ‡Щ… ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ„ЩЉЩ†ЩѓШіШџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Installing SANE packages..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш­ШІЩ… SANE..."
+msgid "Boot ISO"
+msgstr "Щ…Щ„ЩЃ ISO Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing HPOJ package..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш­ШІЩ…Ш© HPOJ..."
+msgid "Eritrea"
+msgstr "Ш§Ш±ЩЉШЄШ±ЩЉШ§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш·Ш§ШЁШ№ШЄЩѓ Ш¬Щ‡Ш§ШІШ§Щ‹ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Щ…Щ† HP ШЈЩ€ Sony (OfficeJet, PSC, LaserJet "
-"1100/1200/1220/3200/3300 Щ…Ш№ Щ…Ш§ШіШ­ Ш¶Щ€Ш¦ЩЉ, Sony IPJ-V100) ШЈЩ€ Ш¬Щ‡Ш§ШІ HP PhotoSmart "
-"ШЈЩ€ HP LaserJet 2200?"
+msgid "Remove List"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid "A command line must be entered!"
-msgstr "ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„ ШіШ·Ш± ШЈЩ€Ш§Щ…Ш±"
+msgid "A customizable environment"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Command line"
-msgstr "ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
+msgid "Inuktitut"
+msgstr "Ш§ЩЉЩ†Щ€ЩѓШЄЩЉШЄЩ€ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
-msgstr ""
-"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ ШЈЩЉ ШЈЩ…Ш± Щ‡Щ„Ш§Щ…ЩЉ ЩЉЩ…ЩѓЩ† ШЄШ­Щ€ЩЉЩ„ Щ€ШёЩЉЩЃШ© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„ЩЉЩ‡ ШЁШЇЩ„Ш§Щ‹ Щ…Щ† Ш§Ш±ШіШ§Щ„Щ‡Ш§ "
-"Щ…ШЁШ§ШґШ±Ш©Щ‹ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
+msgid "Morocco"
+msgstr "Ш§Щ„Щ…ШєШ±ШЁ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Pipe into command"
-msgstr "Ш­Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШЈЩ…Ш±"
+msgid "Which printer model do you have?"
+msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ„ШЇЩЉЩѓШџ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detected model: %s %s"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш±Ш§ШІ: %s %s"
+msgid "Add a new printer"
+msgstr "ШЈШ¶ЩЃ Ш·Ш§ШЁШ№Ш© Ш¬ШЇЩЉШЇШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A valid URI must be entered!"
-msgstr "ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„ URI ШµШ§Щ„Ш­!"
+msgid "          All of your selected data have been          "
+msgstr "          ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШЄЩ…          "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "URI Ш¬Щ‡Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "<-- Delete"
+msgstr "<-- Ш­Ш°ЩЃ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ Ш§Щ„ЩЂURI Щ…ШЁШ§ШґШ±Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Щ„ЩЂURI ЩЉШ¬ШЁ ШЈЩ† ЩЉШЄЩ€Ш§ЩЃЩ‚ Щ…Ш№ "
-"Щ…ШЄШ·Щ„ШЁШ§ШЄ CUPS ШЈЩ€ Foomatic. Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ Щ„ЩЉШіШЄ ЩѓЩ„ ШЈЩ†Щ€Ш§Ш№ Ш§Щ„ЩЂURI Щ…ШЇШ№Щ€Щ…Ш© Щ…Щ† "
-"Ш§Щ„ЩЂspoolers."
+msgid "Nepal"
+msgstr "Щ†ЩЉШЁШ§Щ„"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Port"
-msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ©"
+msgid "cpu # "
+msgstr "cpu # "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer host name or IP"
-msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ Ш§Щ„ЩЂ IP"
+msgid "chunk size"
+msgstr "Ш­Ш¬Щ… chunk"
 
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "The port number should be an integer!"
-msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш±Щ‚Щ…Ш§Щ‹ ШµШ­ЩЉШ­Ш§Щ‹!"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ Ш§Щ„ЩЂ IP Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Problems installing package %s"
+msgstr "ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Щ…ШґШ§ЩѓЩ„ ЩЃЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш·Ш§ШЁШ№Ш© TCP ШЈЩ€ socket, ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP "
-"Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ§Щ‹ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш¶Ш§ЩЃШ© Ш±Щ‚Щ… Щ…Щ†ЩЃШ° Ш§Щ„Ш·Ш§ШЁШ№Ш© (Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ 9100). "
-"Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ HP JetDirect ЩЉЩѓЩ€Щ† Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш№Ш§ШЇШ©Щ‹ Щ‡Щ€ 9100, Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ "
-"ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉЩѓЩ€Щ† Ш§Щ„Ш±Щ‚Щ… ШєЩЉШ± Ш°Щ„Щѓ. Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ„Ш№ШЄШ§ШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ."
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "ШіЩ€ЩЃ ШЄШіШЄЩ„Щ… ШЄЩ†ШЁЩЉЩ‡Ш§ Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ШЈШ№Щ„Щ‰ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ‚ЩЉЩ…Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
-"Ш§Ш®ШЄШ± Щ€Ш§Ш­ШЇШ© Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… "
-"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш±Щ‚Щ… IP Щ€ Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШҐШ®ШЄЩЉШ§Ш±ЩЉ (Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ 9100) ЩЃЩЉ Ш­Щ‚Щ€Щ„ "
-"Ш§Щ„ШҐШЇШ®Ш§Щ„."
+"\n"
+"\n"
+"Щ„ШЄШіЩ„ЩЉЩ… ШЄЩ‚Ш±ЩЉШ± Ш§Щ„Ш№ЩЉЩ€ШЁ, Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± ШЄЩ‚Ш±ЩЉШ±.\n"
+"ШіЩЉЩ‚Щ€Щ… Щ‡Ш°Ш§ ШЁЩ‚ШЄШ­ Щ…ШЄШµЩЃШ­ Щ€ЩЉШЁ Ш№Щ„Щ‰ Ш§Щ„ШµЩЃШ­Ш© https://drakbug.mandrakesoft.com\n"
+" Ш­ЩЉШ« ШіШЄШ¬ШЇ Ш§ШіШЄЩ…Ш§Ш±Ш© Ш№Щ„ЩЉЩѓ Щ…Щ„Ш¤Щ‡Ш§. Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓШ±Ш© ШЈШ№Щ„Ш§Щ‡ ШіЩЉШЄЩ… Щ†Щ‚Щ„Щ‡Ш§\n"
+"Ш§Щ„Щ‰ Ш°Щ„Щѓ Ш§Щ„Ш®Ш§ШЇЩ…\n"
+"\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© TCP/Socket"
+msgid "Add a scanner manually"
+msgstr "ШЈШ¶ЩЃ Щ…Ш§ШіШ­ Ш¶Щ€Ш¦ЩЉ ЩЉШЇЩ€ЩЉШ§Щ‹"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "Reload partition table"
+msgstr "ШҐШ№Ш§ШЇШ© ШЄШ­Щ…ЩЉЩ„ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄЩ‚ШіЩЉЩ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Щ†Ш№Щ…, ШЈШ±ЩЉШЇ ШЇШ®Щ€Щ„Ш§ ШўЩ„ЩЉШ§ Щ…Ш№ Щ‡Ш°Ш§ )Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ШіШ·Ш­ Ш§Щ„Щ…ЩѓШЄШЁ("
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Scanning network..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ…ШіШ­ Ш§Щ„ШґШЁЩѓШ©..."
+msgid "Search for fonts in installed list"
+msgstr "Ш§ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш®Ш·Щ€Ш· ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Ш«ШЁШЄШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Printer auto-detection"
-msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr "Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ„Щ… ШЄЩ†ШЄЩ‡ ШЁЩЂ`0', Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш®Ш±Щ€Ш¬."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NCP queue name missing!"
-msgstr "Ш§ШіЩ… ШµЩЃ NCP Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Boot"
+msgstr "Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "NCP server name missing!"
-msgstr "Ш§ШіЩ… Ш®Ш§ШЇЩ… NCP Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Tuner type:"
+msgstr "Щ†Щ€Ш№ Ш§Щ„ШЄЩ€Щ†Ш±:"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Ш§ШіЩ… ШµЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
+msgstr ""
+"Ш§?Щ†, Ш­Ш§Щ† Щ€Щ‚ШЄ Ш§Ш®ШЄЩЉШ§Ш± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ„Щ†ШёШ§Щ…Щѓ. ШЄЩ€ЩЃШ± ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰\n"
+"Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© Щ€Ш§Ш­ШЇ, Щ„ЩѓЩ† Mandrake Linux ЩЉЩ€ЩЃШ± Щ„Щѓ Щ†ШёШ§Щ…ЩЉЩ†. ЩѓЩ„ Щ†ШёШ§Щ… Щ…Щ†Ш§ШіШЁ\n"
+"Щ„Щ†Щ€Шє Щ…Ш№ЩЉЩ† Щ…Щ† Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©.\n"
+"\n"
+" * \"%s\"--Щ€ Щ‡Щ€ Ш§Ш®ШЄШµШ§Ш± Щ„ЩЂ``print, don't queue'' ШЈЩЉ ``Ш§Ш·ШЁШ№ Щ€ ? ШЄШµЩЃ'', Щ‡Ш°Ш§ Щ‡Щ€ "
+"Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш© ШЁШ§Щ„Ш·Ш§ШЁШ№Ш©, Щ€ ШЄШ±ЩЉШЇ ШЄЩЃШ§ШЇЩЉ ШЈЩЉ Ш§Ш±ШЄШЁШ§Щѓ ЩЃЩЉ Ш§Щ„Ш·Ш§ШЁШ№Ш©\n"
+"Щ€ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©.(ЩЉЩ‚Щ€Щ… \"pdq\" ШЁШ§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ Ш­Ш§?ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЁШіЩЉШ·Ш©\n"
+"Щ€ ЩЉШ№ЩЉШЁЩ‡ Ш§Щ„ШЁШ·Ш¦ Ш№Щ†ШЇ Ш§?ШіШЄШ®ШЇШ§Щ… Щ…Ш№ Ш§Щ„ШґШЁЩѓШ§ШЄ). Щ…Щ† Ш§?ЩЃШ¶Щ„ ШЈЩ† ШЄШіШЄШ®ШЇЩ… \"pdq\" Ш§Ш°Ш§.\n"
+"ЩѓШ§Щ†ШЄ Щ‡Ш°Щ‡ ШЄШ¬Ш±ШЁШЄЩѓ Ш§?Щ€Щ„Щ‰ Щ…Ш№ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі.\n"
+"\n"
+" * \"%s\" - ``Common UNIX Printing System'', Щ‡Щ€ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
+"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш·Ш§ШЁШ№ШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ€ Ш­ШЄЩ‰ Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш© ЩЃЩЉ Ш§Щ„Щ†ШµЩЃ Ш§?Ш®Ш± Щ…Щ† Ш§Щ„ЩѓЩ€ЩѓШЁ. Ш§Щ†Щ‡\n"
+"ШіЩ‡Щ„ Ш§?Ш№ШЇШ§ШЇ Щ€ ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉШЄШµШ±ЩЃ ЩѓШ®Ш§ШЇЩ… ШЈЩ€ ЩѓШ№Щ…ЩЉЩ„ ?Щ†ШёЩ…Ш© Ш·ШЁШ§Ш№Ш© \"lpd\"\n"
+"Ш§Щ„Щ‚ШЇЩЉЩ…Ш©, Щ„Ш°Ш§ ЩЃШҐЩ†Щ‡ Щ…ШЄЩ€Ш§ЩЃЩ‚ Щ…Ш№ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ‚ШЇЩЉЩ…Ш©\n"
+"Ш§Щ„ШЄЩЉ ? ШЄШІШ§Щ„ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш©.ШЁЩЉЩ†Щ…Ш§ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШіЩ‡Щ„Ш©\n"
+"Щ€ Щ‚Щ€ЩЉШ© Щ…Ш«Щ„ \"pdq\". Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Ш­Ш§ЩѓШ§Ш© Ш®Ш§ШЇЩ… \"lpd\", ШЄШЈЩѓШЇ\n"
+"Щ…Щ† ШЄШґШєЩЉЩ„ Щ…Ш±Ш§Щ‚ШЁ \"cups-lpd\". ЩЉШ­ШЄЩ€ЩЉ %s Ш№Щ„Щ‰ Щ€Ш§Ш¬Щ‡Ш§ШЄ\n"
+"Ш±ШіЩ€Щ…ЩЉШ© Щ„Щ„Ш·ШЁШ§Ш№Ш© ШЈЩ€ Ш§Ш®ШЄЩЉШ§Ш± Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ ШҐШЇШ§Ш±Ш©\n"
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"\n"
+"Ш§Ш°Ш§ Щ‚Щ…ШЄ ЩЉШЄЩ‚Ш±ЩЉШ± Ш§Ш®ШЄЩЉШ§Ш±Щѓ Ш§?Щ†, Ш«Щ… Щ„Щ… ЩЉШ№Ш¬ШЁЩѓ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©\n"
+"ЩЃЩЉЩ…Ш§ ШЁШ№ШЇ, ЩЉЩ…ЩѓЩ†Щѓ ШЄШєЩЉЩЉШ±Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЄШґШєЩЉЩ„ PrinterDrake Щ…Щ† Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake\n"
+"Щ€ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ ШІШ± Ш§Щ„Ш®ШЁЩЉШ±."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer Server"
-msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "\"Menu\" key"
+msgstr "Щ…ЩЃШЄШ§Ш­ \"Menu\""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
-"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш© NetWare, ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш®Ш§ШЇЩ… Ш·ШЁШ§Ш№Ш© NetWare (Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ "
-"Щ‚ШЇ ЩЉШ®ШЄЩ„ЩЃ Ш№Щ† Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP!) ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„ШµЩЃ Щ„Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ Ш±ШєШЁ ЩЃЩЉ "
-"Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡Ш§ ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ… Щ€ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Щ…Щ†Ш§ШіШЁШЄЩЉЩ†."
+"\n"
+"\n"
+"ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† Щ‚ЩЉШ§Щ… Printerdrake ШЁШ§ЩѓШЄШґШ§ЩЃ Ш·Ш±Ш§ШІ Ш·Ш§ШЁШ№ШЄЩѓ ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.  Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ "
+"Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„ШµШ­ЩЉШ­ Ш§Ш°Ш§ ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш±Ш§ШІ Ш®Ш·ШЈ ШЈЩ€ \"Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ…\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© NetWare"
+msgid "Security Administrator:"
+msgstr "Щ…ШЇЩЉШ± Ш§Щ„ШЈЩ…Щ†:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter your login"
+msgstr "Ш±Ш¬Ш§ШЎ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr "if set to yes, check permissions of files in the users' home."
+
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
-"Щ€ШµЩ‘Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Щ„ЩЉЩ†ЩѓШі Щ€ Ш§Ш¬Ш№Щ„ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Windows ШЄШЄШµЩ„ ШЁЩ‡ ЩѓШ№Щ…Щ„Ш§ШЎ.\n"
-"\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Щ…ШЄШ§ШЁШ№Ш© Ш§Ш№ШЇШ§ШЇ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩѓЩ…Ш§ ШЄЩЃШ№Щ„ Ш§Щ„ШўЩ†Шџ"
+"Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ ШЈЩЉ Ш§ШЄШµШ§Щ„Ш§ШЄ ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"Щ‚Щ… ШЁШ№Щ…Щ„ Ш§ШЄШµШ§Щ„ ШЈЩ€Щ„Ш§ ШЁШ§ШіШЄШ®ШЇШ§Щ… 'ШЄЩ‡ЩЉШ¦Ш©'"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Fonts copy"
+msgstr "Щ†Щ‚Щ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "ШўЩ„ЩЉ"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ¬Ш±ШЁШ© Ш§Щ„ШҐШ№ШЇШ§ШЇШџ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
-"Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… Windows Щ„Ш¬Ш№Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…ШЄЩ€ЩЃШ±Ш© ШЄШ­ШЄ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ IPP Щ€ Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ "
-"Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© \"%s\" ЩЃЩЉ Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "ШЄЩ… Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ† Star Office/OpenOffice.org/GIMP ШЁЩ†Ш¬Ш§Ш­."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш­ШіШ§ШЁ ЩЃЩЉ Windows Щ…Ш№ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±. ШЁШіШЁШЁ Ш®Ш·ШЈ ЩЃЩЉ "
-"Щ‡ЩЉЩѓЩ„ЩЉШ© Ш№Щ…ЩЉЩ„ Samba, ЩЉШЄЩ… Щ€Ш¶Ш№ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ШЁЩ†Шµ Щ€Ш§Ш¶Ш­ ЩЃЩЉ ШіШ·Ш± ШЈЩ€Ш§Щ…Ш± Ш№Щ…ЩЉЩ„ Samba  "
-"Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ†Щ‚Щ„ Щ€ШёЩЉЩЃШ© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Windows. Щ„Ш°Ш§ ЩЃШҐЩ†Щ‡ ЩЉЩ…ЩѓЩ† Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ… Ш№Щ„Щ‰ "
-"Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ЩЉШ№Ш±Ш¶ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… ЩѓЩ„Щ…Ш§ШЄ Щ…Ш±Щ€Ш± Щ…Ш«Щ„ \"ps "
-"auxwww\".\n"
+"Щ‚ЩЉШ§ШіЩЉ: Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Ш§Щ„Щ…Щ†ШµЩ€Ш­ ШЁЩ‡ Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ЩЉЩ‚Щ€Щ… ШЁШ§Щ„ШҐШЄШµШ§Щ„\n"
+"               ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩѓШ№Щ…ЩЉЩ„.\n"
 "\n"
-"Щ†Ш­Щ† Щ†Щ†ШµШ­ ШЁШ§ШіШЄШ№Щ…Ш§Щ„ Щ€Ш§Ш­ШЇ Щ…Щ† Ш§Щ„ШЁШЇШ§Ш¦Щ„ Ш§Щ„ШЄШ§Щ„ЩЉШ© (ЩЃЩЉ ЩѓЩ„ Ш§Щ„Ш­Ш§?ШЄ Ш№Щ„ЩЉЩѓ Ш§Щ„ШЄШЈЩѓШЇ ШЈЩ† "
-"Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЄШіШЄШ·ЩЉШ№ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Windows, Ш№Щ† "
-"Ш·Ш±ЩЉЩ‚ Ш§ШіШЄШ®ШЇШ§Щ… Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ Щ…Ш«Щ„Ш§Щ‹):\n"
+"Щ…Ш±ШЄЩЃШ№:       ШЄЩ€Ш¬ШЇ ШЁШ№Ш¶ Ш§Щ„Щ‚ЩЉЩ€ШЇ Щ…ШіШЁЩ‚Ш§Щ‹, Щ€ ШЁШ№Ш¶ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±Ш§ШЄ ЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹ Ш№Щ†ШЇ ЩѓЩ„ "
+"Щ„ЩЉЩ„Ш©.\n"
 "\n"
-"Ш§ШіШЄШ®ШЇЩ… Ш­ШіШ§ШЁ ШЇЩ€Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… Windows, Щ…Ш«Щ„ Ш­ШіШ§ШЁ \"GUEST\" ШЈЩ€ Ш­ШіШ§ШЁ Ш®Ш§Шµ "
-"Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ„Ш·ШЁШ§Ш№Ш©. ? ШЄЩ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„Ш­Щ…Ш§ЩЉШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± Щ…Щ† Ш­ШіШ§ШЁЩѓ Ш§Щ„ШґШ®ШµЩЉ "
-"ШЈЩ€ Щ…Щ† Ш­ШіШ§ШЁ Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ….\n"
+"Щ…Ш±ШЄЩ‚Ш№ ШЈЩѓШ«Ш±:    Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ШЁШґЩѓЩ„ ЩѓШ§ЩЃЩЌ Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШіШЄШ·ЩЉШ№ ШЈЩ† "
+"ЩЉЩ‚ШЁЩ„\n"
+"              Ш§Щ„ШҐШЄШµШ§Щ„Ш§ШЄ Щ…Щ† Ш№Щ…Щ„Ш§ШЎ ЩѓШ«ЩЉШ±ЩЉЩ†. Ш§Ш°Ш§ ЩѓШ§Щ† Ш­Ш§ШіШЁЩѓ Щ…Ш¬Ш±ШЇ Ш№Щ…ЩЉЩ„ Ш№Щ„Щ‰ "
+"Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ\n"
+"\t      ЩЃЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШіШЄЩ€Щ‰ ШЈЩ‚Щ„.\n"
 "\n"
-"Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… Windows Щ„Ш¬Ш№Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€ЩЃШ±Ш© ШЄШ­ШЄ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ LPD. Ш«Щ… Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ "
-"Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…Ш№ Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© \"%s\" ЩЃЩЉ PrinterDrake.\n"
+"Щ…Ш±ШЄЩ‚Ш№ Ш¬ШЇШ§Щ‹: Щ‡Ш°Ш§ ЩЉЩ…Ш§Ш«Щ„ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШіШ§ШЁЩ‚, Щ„ЩѓЩ† Ш§Щ„Щ†ШёШ§Щ… ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ ЩЉЩѓЩ€Щ† Щ…ШєЩ„Щ‚Ш§Щ‹ Щ€ "
+"Ш§Щ„Щ…ШІШ§ЩЉШ§\n"
+"                Ш§Щ„ШЈЩ…Щ†ЩЉШ© ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ ШЈЩ‚ШµЩ‰ Ш­ШЇ\n"
 "\n"
+"Щ…ШЇЩЉШ± Ш§Щ„ШЈЩ…Щ†:\n"
+"               Ш§Ш°Ш§ ЩѓШ§Щ† Ш®ЩЉШ§Ш± 'Ш§Щ„ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ Ш§Щ„ШЈЩ…Щ†ЩЉШ©' Щ…Ш®ШЄШ§Ш±Ш§Щ‹, ЩЃШіЩЉШЄЩ… Ш§Ш±ШіШ§Щ„ ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ "
+"ШЈЩ…Щ†ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… (ШЁШҐШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…\n"
+"\t       ШЈЩ€ Ш§Щ„ШЁШ±ЩЉШЇ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr "ШЄШ­Ш°ЩЉШ± ШЈЩ…Щ†ЩЉ!"
+msgid "Save packages selection"
+msgstr "Ш§Ш­ЩЃШё Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш­ШІЩ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Samba share name missing!"
-msgstr "Ш§ШіЩ… Щ…ШґШ§Ш±ЩѓШ© Samba Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Remove the last item"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…Ш§ШЇШ© Ш§Щ„ШЈШ®ЩЉШ±Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "ЩЉШ¬ШЁ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Ш®Ш§ШЇЩ… ШЈЩ€ Ш±Щ‚Щ… IP Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш®Ш§ШЇЩ…!"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„Ш°ЩЉЩ† ШіЩЉШЄЩ… Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Щ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detected"
-msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
+msgid "No net boot images created!"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Щ†ШґШ§ШЎ ШµЩ€Ш± Ш§Щ‚Щ„Ш§Ш№ Ш№ШЁШ± Ш§Щ„ШґШЁЩѓШ©!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Щ…Ш¬Щ…Щ€Ш№Ш© Ш§Щ„Ш№Щ…Щ„"
+msgid "use pptp"
+msgstr "Ш§ШіШЄШ®ШЇЩ… pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШґШ§Ш±ЩѓШ©"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Ш§Ш®ШЄШ± ШЈЩЉ Ш®ШЇЩ…Ш§ШЄ ШЄШ±ЩЉШЇЩ‡Ш§ ШЈЩ† ШЄШЁШЇШЈ ШўЩ„ЩЉШ§Щ‹ Ш№Щ†ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server IP"
-msgstr "IP Ш®Ш§ШЇЩ… SMB"
+msgid "Learn how to use this printer"
+msgstr "ШЄШ№Щ„Щ… ЩѓЩЉЩЃ ШЄШіШЄШ®ШЇЩ… Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "Щ…ШіШЄШ¶ЩЉЩЃ Ш®Ш§ШЇЩ… SMB"
+msgid "Configure the network now"
+msgstr "Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-" Ш§Ш°Ш§ ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…Ш·Щ„Щ€ШЁШ© ШўЩ„ЩЉШ§Щ‹, ЩѓЩ„ Щ…Ш§ Ш№Щ„ЩЉЩѓ Щ‡Щ€ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш«Щ… "
-"ШЈШ¶ЩЃ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±, Щ€/ШЈЩ€ Щ…Ш¬Щ…Щ€Ш№Ш© Ш§Щ„Ш№Щ…Щ„ Ш§Щ† Ш§Ш­ШЄШ¬ШЄ Щ„Ш°Щ„Щѓ."
+msgid "Choose a mirror from which to get the packages"
+msgstr "Ш§Ш®ШЄШ± Щ…Ш±ШўШ© ШіЩЉШЄЩ… Щ…Щ† Ш®Щ„Ш§Щ„Щ‡Ш§ ШЄЩ†ШІЩЉЩ„ Ш§Щ„Ш­ШІЩ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш·Ш§ШЁШ№Ш© SMB, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ SMB (Щ…Щ„Ш­Щ€ШёШ©! Щ‚ШЇ ЩЉЩѓЩ€Щ† "
-"Щ…Ш®ШЄЩ„ЩЃШ§Щ‹ Ш№Щ† Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ TCP/IP!) Щ€ Ш±ШЁЩ…Ш§ Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Ш®Ш§Шµ ШЁШ®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ "
-"Ш§ШіЩ… Ш§Щ„Щ…ШґШ§Ш±ЩѓШ© Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄЩ€ШЇ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„ЩЉЩ‡Ш§ ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© "
-"Щ…Ш±Щ€Ш±, Щ€ Щ…Ш¬Щ…Щ€Ш№Ш© Ш№Щ…Щ„ Щ…Щ†Ш§ШіШЁШ©."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© SMB (Windows 9x/NT)"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ… \"%s\""
+"Щ„Щ… ШЄШЄЩ…ЩѓЩ† ШЈШЇШ§Ш© ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… FAT Щ…Щ† Ш§Щ„ШЄШ№Ш§Щ…Щ„ Щ…Ш№ ШЄШ¬ШІШ¦ШЄЩѓ, \n"
+"ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ… \"%s\""
+msgid "Which sector do you want to move it to?"
+msgstr "ШЈЩЉ Щ‚Ш·Ш§Ш№ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Remote printer name missing!"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ© Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Do you want to click on this button?"
+msgstr "Do you want to click on this button?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЁШ№ЩЉШЇ Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid "Bahamas"
+msgstr "Ш¬ШІШ± Ш§Щ„ШЁШ§Щ‡Ш§Щ…Ш§"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Manual configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Remote host name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЁШ№ЩЉШЇ"
+msgid "search"
+msgstr "ШЁШ­Ш«"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш© lpd ШЁШ№ЩЉШЇШ©, Ш№Щ„ЩЉЩѓ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© "
-"Ш№Щ„Щ‰ Ш°Щ„Щѓ Ш§Щ„Ш®Ш§ШЇЩ…."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© lpd Ш§Щ„ШЁШ№ЩЉШЇ"
+"Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш© ШЄЩ‚Щ€Щ… ШЁШЄШ­Щ…ЩЉЩ„ Ш®Ш±ЩЉШ·Ш© Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ЩѓЩ…Ш§\n"
+"ШЄЩ… ШЄШ№ЩЉЩЉЩ†Щ‡Ш§ ЩЃЩЉ /etc/sysconfig/keyboard. ЩЉЩ…ЩѓЩ† Ш§Ш®ШЄЩЉШ§Ш± Щ„Щ€Ш®Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШЁШ§ШіШЄШ®ШЇШ§Щ… "
+"ШЈШЇШ§Ш© kbdconfig.\n"
+"ЩЉШ¬ШЁ ШЄШ±ЩѓЩ‡Ш§ Щ…Щ…ЩѓЩ‘Щ†Ш© ЩЃЩЉ ШЈШєЩ„ШЁ Ш§Щ„ШЈШ¬Щ‡ШІШ©."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Manual configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (Щ…ШґШєЩ„ Ш№Ш±Ш¶ Ш§Щ„ШЄШ«ШЁЩЉШЄ)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„/Ш§Ш®ШЄЩЉШ§Ш± Ш·Ш§ШЁШ№Ш©/Ш¬Щ‡Ш§ШІ"
+msgid "Zeroconf host name must not contain a ."
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf Ш№Щ„Щ‰ ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-" (Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ©: /dev/lp0, /dev/lp1, ..., Щ…Щ…Ш§ШґЩ„ Щ„ЩЂ LPT1:, LPT2:, ..., "
-"Ш·Ш§ШЁШ№Ш© USB Ш§Щ„ШЈЩ€Щ„ЩЉ: /dev/usb/lp0, Ш·Ш§ШЁШ№Ш© USB Ш§Щ„Ш«Ш§Щ†ЩЉШ©: /dev/usb/lp1, ...)"
+"Syslog Щ‡ЩЉ Ш§Щ„Щ€ШіЩЉЩ„Ш© Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ Ш§Щ„Ш№ШЇЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ Щ„ШЄШіШ¬ЩЉЩ„ Ш§Щ„Ш±ШіШ§Ш¦Щ„\n"
+"Ш§Щ„Щ‰ Щ…Щ„ЩЃШ§ШЄ ШіШ¬Щ„Ш§ШЄ Ш№ШЇЩЉШЇШ©. Ш§Щ†Щ‡Ш§ ЩЃЩѓШ±Ш© Ш¬ЩЉШЇШ© ШЈЩ† ШЄЩ‚Щ€Щ… ШЇШ§Ш¦Щ…Ш§Щ‹ ШЁШЄШґШєЩЉЩ„ syslog."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…Щ€ШµЩ„Ш© ШҐЩ„ЩЉЩ‡ Ш·Ш§ШЁШ№ШЄЩѓ."
+msgid "Unknown/Others"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ/ШЈШ®Ш±Щ‰"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
+msgid "No TV Card detected!"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ!"
+
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШіШЄШ°Щ‡ШЁ Ш§Щ„ЩЉЩ‡Ш§ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш©."
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "ШЄЩ… ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШўЩ†."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇЩ‡Ш§. Ш§Ш№ШЇШ§ШЇ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШіЩЉШ№Щ…Щ„ ШўЩ„ЩЉШ§Щ‹. Ш§Щ† Щ„Щ… ЩЉШЄЩ… "
-"Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­ ШЈЩ€ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„ ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ© ШґШєЩ„ \"ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©\"."
+"ШЈЩ†ШЄ ШЄЩ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№Ш© OKI laser winprinter. Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
+"ШЄШіШЄШ®ШЇЩ… ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§ШЄШµШ§Щ„Ш§ШЄ Ш®Ш§Шµ Щ€ Щ„Ш°Ш§ ЩЃЩ‡ЩЉ ШЄШ№Щ…Щ„ ЩЃЩ‚Ш· Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШЄШµЩ„Ш© ШЁШ§Щ„Щ…Щ†ЩЃШ° "
+"Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ Ш§Щ„ШЈЩ€Щ„. Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄШµЩ„Ш© ШЁЩ…Щ†ЩЃШ° ШўШ®Ш± ШЈЩ€ ШЁШ®Ш§ШЇЩ… Ш·ШЁШ§Ш№Ш© ЩЃЩ…Щ† ЩЃШ¶Щ„Щѓ "
+"Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ Ш§Щ„ШЈЩ€Щ„ Щ‚ШЁЩ„ ШЈЩ† ШЄШ·ШЁШ№ ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©. Ш§Щ† Щ„Щ… "
+"ШЄЩЃШ№Щ„ Ш°Щ„Щѓ ЩЃЩ„Щ† ШЄШ№Щ…Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш©. Ш§Ш№ШЇШ§ШЇ Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© ШіЩЉШЄЩ… ШЄШ¬Ш§Щ‡Щ„Щ‡ Щ…Щ† Ш§Щ„Щ…ШґШєЩ‘Щ„."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШ­Щ‚Щ‘ЩЋЩ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹. "
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Ш¬ЩЉЩ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ (Щ…Ш«Ш§Щ„: 8 Щ„ШЁЩ†ШЄЩЉЩ€Щ… III, ...)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "Ш­Ш§Щ„ЩЉШ§Щ‹ Щ„Ш§ ЩЉЩ€Ш¬ШЇ Ш§Ш­ШЄЩ…Ш§Щ„ ШЁШЇЩЉЩ„"
+msgid "Auto-detected"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-"Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШіЩЉШ№Щ…Щ„ ШЁШґЩѓЩ„ ШўЩ„ЩЉ. Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш·Ш§ШЁШ№ШЄЩѓ ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­ ШЈЩ€ Ш§Ш°Ш§ "
-"ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„ Ш§Ш№ШЇШ§ШЇ Щ…Ш®ШµШµ ШґШєЩ‘Щ„ \"ШЄЩ‡ЩЉШ¦Ш© ЩЉШЇЩ€ЩЉШ©\"."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The following printer was auto-detected. "
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШўШЄЩЉШ© ШўЩ„ЩЉШ§Щ‹. "
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІЩѓ Щ„ШЄШ«ШЁЩЉШЄ Ш®Ш§ШЇЩ… PXE ЩѓШ®Ш§ШЇЩ… DHCP\n"
+"Щ€ Ш®Ш§ШЇЩ… TFTP Щ„ШЁЩ†Ш§ШЎ Ш®Ш§ШЇЩ… ШЄШ«ШЁЩЉШЄ.\n"
+"ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ШЄЩѓЩ€Щ† Ш§Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ‚Ш§ШЁЩ„Ш© Щ„Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† "
+"Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ.\n"
+"\n"
+"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… drakconnect Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
+"\n"
+"Щ…Щ„Ш­Щ€ШёШ©: ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Щ…Ш®ШµШµ Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© (LAN)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄШ°Щ‡ШЁ Ш§Щ„ЩЉЩ‡Ш§ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… "
-"Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -11519,1058 +11680,772 @@ msgid ""
 msgstr ""
 "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇЩ‡Ш§ ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr "ШЁШЇЩ„Ш§Щ‹ Щ…Щ† Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ ШЄШ­ШЇЩЉШЇ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Ш§ Ш§Щ„ШҐШЇШ®Ш§Щ„"
+msgid "Refuse"
+msgstr "Ш§Ш±ЩЃШ¶"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ‡Ш°Щ‡ Щ‡ЩЉ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§, ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ Ш§Щ„ШҐШЇШ®Ш§Щ„"
+"HardDrake ЩЉЩ‚Щ€Щ… ШЁШ§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ, Щ€ ЩЉЩ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ\n"
+"Ш§Щ„Ш¬ШЇЩЉШЇ/Ш§Щ„Щ…ШЄШєЩЉШ± ШЁШґЩѓЩ„ Ш§Ш®ШЄЩЉШ§Ш±ЩЉ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, c-format
-msgid "Available printers"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid "Remote Printers"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "No printer found!"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Ш·Ш§ШЁШ№Ш©!"
+msgid "Creating and formatting file %s"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ€ ШЄШ¬Щ‡ЩЉШІ Ш§Щ„Щ…Щ„ЩЃ %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You must enter a device or file name!"
-msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„ Ш¬Щ‡Ш§ШІ ШЈЩ€ Ш§ШіЩ… Щ…Щ„ЩЃ!"
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr "if set to yes, check additions/removals of sgid files."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©! Щ„ШЄШ«ШЁЩЉШЄ Ш·Ш§ШЁШ№Ш© ЩЉШЇЩ€ЩЉШ§Щ‹ Ш§ШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ/Ш§ШіЩ… Щ…Щ„ЩЃ ЩЃЩЉ Ш­Щ‚Щ„ "
-"Ш§Щ„ШҐШЇШ®Ш§Щ„ (Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ©: /dev/lp0, /dev/lp1, ..., Щ…Щ…Ш§Ш«Щ„Ш© Щ„ЩЂLPT1:, "
-"LPT2:, ..., Ш·Ш§ШЁШ№Ш© USB Ш§Щ„ШЈЩ€Щ„Щ‰: /dev/usb/lp0, Ш·Ш§ШЁШ№Ш© USB Ш§Щ„Ш«Ш§Щ†ЩЉШ©: /dev/usb/"
-"lp1, ...)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Local Printer"
-msgstr "Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©"
+msgid "Choose an existing LVM to add to"
+msgstr "Ш§Ш®ШЄШ± LVM l,Ш¬Щ€ШЇ Щ„Щ„Ш§Ш¶Ш§ЩЃШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "USB printer \\#%s"
-msgstr "Ш·Ш§ШЁШ№Ш© USB \\#%s"
+msgid "xfs restart"
+msgstr "xfs restart"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉ \\#%s"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹,\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\""
+msgid "No partition available"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "Use the scanners on hosts: "
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ: "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Detected %s"
-msgstr "ШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† %s"
+msgid "Unselected All"
+msgstr "ШЄЩ… Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ЩѓЩ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\""
+msgid "Domain Name Resolver"
+msgstr "Domain Name Resolver"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", Ш·Ш§ШЁШ№Ш© ШґШЁЩѓШ© \"%s\", Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "Encryption key (again)"
+msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ± (Щ…Ш±Ш© ШЈШ®Ш±Щ‰)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
-"\n"
-"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, ШЄЩ… ШЄШ«ШЁЩЉШЄ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№ШЄЩѓ!\n"
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЈЩ…Ш± \"Ш§Ш·ШЁШ№\" ЩЃЩЉ ШЄШ·ШЁЩЉЩ‚Ш§ШЄЩѓ (Ш№Ш§ШЇШ© ЩЃЩЉ Щ‚Ш§Ш¦Щ…Ш© \"Щ…Щ„ЩЃ\").\n"
-"\n"
-"Ш§Ш°Ш§ ШЈШ±ШЇШЄ Ш§Ш¶Ш§ЩЃШ© ШЈЩ€ Ш­Ш°ЩЃ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄШіЩ…ЩЉШ© Ш·Ш§ШЁШ№Ш©, ШЈШ© Ш§Ш°Ш§ ШЈШ±ШЇШЄ ШЄШєЩЉЩЉШ± Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© "
-"Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© (Ш¬Щ€ШЇШ© Ш§Щ„Ш·ШЁШ§Ш№Ш©, ШЄШєЩЉЩЉШ± Ш§Щ„Ш­ШЁШ±, ...), Ш§Ш®ШЄШ± \"Ш§Щ„Ш·Ш§ШЁШ№Ш©\" ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш№ШЄШ§ШЇ"
-"\" ЩЃЩЉ Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake."
+msgid "Samba share name missing!"
+msgstr "Ш§ШіЩ… Щ…ШґШ§Ш±ЩѓШ© Samba Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
-msgstr "ШЄШ­Щ‚Щ‘Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЄШ№Щ…Щ„ Ш№Щ„Щ‰ Microsoft Windows"
+msgid "True Type install done"
+msgstr "ШЄЩ… ШЄШ«ШЁЩЉШЄ Ш®Ш·Щ€Ш· True Type"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "ШЄШ­Щ‚Щ‘Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid "Detection in progress"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "ШЄШ­Щ‚Щ‚ ШЈЩ„ЩЉШ§ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ"
+msgid "Build Whole Kernel -->"
+msgstr "Ш§ШЁЩ†ЩЉ ЩѓЩ„ Ш§Щ„Щ†Щ€Ш§Ш© -->"
+
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "ШЈЩ‡Щ„Ш§ ШЁЩѓЩ… ЩЃЩЉ %s"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ€Ш­ШЇШ§ШЄ Ш§Щ„ШЄШ­ШЇЩЉШ« ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Bootsplash"
+msgstr "Bootsplash!"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"%s%s\n"
+"is directly connected to your system"
 msgstr ""
+"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
 "\n"
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
-"\n"
-"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
-"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹.\n"
-"\n"
-" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
+"%s%s\n"
+"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
-"\n"
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
-"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ШЈЩ€ "
-"Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ©.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
-"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹. ШЈЩЉШ¶Ш§Щ‹ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш·Ш§ШЁШ№Ш©/"
-"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ…Щ€ШµЩ€Щ„Ш© Щ€ Щ…ШґШєЩ‘Щ„Ш©.\n"
-"\n"
-"Щ„Ш§Ш­Шё ШЈЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ ШЈШ·Щ€Щ„ Щ…Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ "
-"Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЃЩ‚Ш·. Щ„Ш°Ш§ Щ‚Щ… ШЁШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† "
-"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©.\n"
-"\n"
-" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
+msgid "Printer sharing on hosts/networks: "
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ/Ш§Щ„ШґШЁЩѓШ§ШЄ: "
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 "\n"
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
-"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ШЈЩ€ "
-"Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ© ШЈЩ€ ШЁЩ…Ш§ЩѓЩЉЩ†Ш© Windows ШЁШ№ЩЉШЇШ©.\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
-"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹. ШЈЩЉШ¶Ш§Щ‹ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш·Ш§ШЁШ№Ш©/"
-"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ€ ШЈШ¬Щ‡ШІШ© Windows Щ…Щ€ШµЩ€Щ„Ш© Щ€ Щ…ШґШєЩ‘Щ„Ш©.\n"
-"\n"
-"Щ„Ш§Ш­Шё ШЈЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ ШЈШ·Щ€Щ„ Щ…Щ† Ш§Щ„ШЄШ­Щ‚Щ‚ "
-"Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЃЩ‚Ш·. Щ„Ш°Ш§ Щ‚Щ… ШЁШЄШ№Ш·ЩЉЩ„ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† "
-"Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШґШЁЩѓШ© Щ€/ШЈЩ€ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШіШЄШ¶Ш§ЩЃШ© Щ…Щ† Windows Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ‡Ш°Щ‡ "
-"Ш§Щ„Щ…ЩЉШІШ©.\n"
-"\n"
-" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
-"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
+"Ш§Щ„ШЈЩ…Ш± \"%s\" ЩЉШіЩ…Ш­ Щ„Щѓ ЩѓШ°Щ„Щѓ ЩЉШЄШ№ШЇЩЉЩ„ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ€ШёЩЉЩЃШ© Ш·ШЁШ§Ш№Ш© Щ…Ш­ШЇШЇШ©. ШЁЩѓЩ„ "
+"ШЁШіШ§Ш·Ш© ШЈШ¶ЩЃ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш§Щ„Щ‰ ШіШ·Ш± Ш§Щ„ШўЩ€Ш§Щ…Ш±, Щ…Ш«Ш§Щ„ \"%s <file>\". "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
-"\n"
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
-"\n"
-"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ€ Ш§Щ„ШЁШ№ЩЉШЇШ© Щ„ЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ…Щ† Щ‡Ш°Щ‡ "
-"Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Щ€ Щ€ Щ…Щ† Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©.\n"
-"\n"
-"ЩЉШіШЈЩ„Щѓ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Ш№Щ† ЩѓЩ„ Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ© Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ ШЄШ№Ш·ЩЉЩѓ Ш§Щ„Щ‚ШЇШ±Ш© Ш№Щ„Щ‰ "
-"Ш§Щ„Щ€ШµЩ€Щ„ Щ„ЩѓЩ„ Щ…ШґШєЩ„Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШґШєЩ„Ш§ШЄ Щ€ ШЈЩ†Щ€Ш§Ш№ Щ€ШµЩ„Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
+"ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ† ЩЉШ­ШЄШ§Ш¬ Щ…ШґШєЩ„ %s Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Ш¶Ш§ЩЃЩЉШ© Щ„ЩѓЩЉ ЩЉШ№Щ…Щ„\n"
+"ШЁШґЩѓЩ„ ШµШ­ЩЉШ­, Ш§Щ„Ш§ ШЈЩ†Щ‡ ЩЉЩ…ЩѓЩ†Щ‡ Ш§Щ„Ш№Щ…Щ„ Ш¬ЩЉШЇШ§ ШЁШЇЩ€Щ†Щ‡Ш§. Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ­ШЇЩЉШЇ\n"
+"Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Ш¶Ш§ЩЃЩЉШ© Щ„Щ‡ ШЈЩ€ ШЄШіЩ…Ш­ Щ„Щ„Щ…ШґШєЩ„ ШЁШ§Щ„ШЄШ­Щ‚Щ‚ ЩЃЩЉ Ш¬Щ‡Ш§ШІЩѓ\n"
+"Ш№Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШ­ШЄШ§Ш¬Щ‡Ш§Шџ ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ†, Щ‚ШЇ ЩЉШЄШіШЁШЁ Ш§Щ„ШЄШ­Щ‚Щ‚ ЩЃЩЉ ШЄШ№Щ„ЩЉЩ‚ Ш§Щ„Ш¬Щ‡Ш§ШІ, "
+"Щ„ЩѓЩ†\n"
+"Щ„Ш§ ЩЉШ¬ШЁ ШЈЩ† ЩЉШЄШіШЁШЁ Ш°Щ„Щѓ ЩЃЩЉ ШЈЩЉ Щ…ШґШ§ЩѓЩ„."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr "Ш№Щ„Ш§Щ…Ш© Ш§Щ„Щ‚Ш±Шµ Щ„ЩЉШіШЄ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШµШ­ЩЉШ­Ш©. Ш№Щ„Ш§Щ…Ш© Ш§Щ„Щ‚Ш±Шµ Щ‡ЩЉ %s."
+
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
 "\n"
+"%s\n"
 "\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"ШЈЩ‡Щ„Ш§ ШЁЩѓ ЩЃЩЉ ШЈШЇШ§Ш© Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ!\n"
 "\n"
+"%s\n"
 "\n"
-"Щ„Щ… ЩЉШЄЩ…ЩѓЩ† Printerdrake Щ…Щ† Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш·Ш±Ш§ШІ Ш·Ш§ШЁШ№ШЄЩѓ %s. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„ШµШ­ЩЉШ­ "
-"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©."
+"Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Щ„ШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШҐШ№ШЇШ§ШЇ."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid ")"
-msgstr ")"
+msgid "Cuba"
+msgstr "ЩѓЩ€ШЁШ§"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on "
-msgstr " Ш№Щ„Щ‰ "
+msgid "Searching for new printers..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш·Ш§ШЁШ№Ш§ШЄ Ш¬ШЇЩЉШЇШ©..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
-msgstr "("
+msgid "Belize"
+msgstr "ШЁЩЉЩ„ЩЉШІ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configuring printer ..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© ..."
+msgid " (multi-session)"
+msgstr " (Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш¬Щ„ШіШ§ШЄ)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Searching for new printers..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш·Ш§ШЁШ№Ш§ШЄ Ш¬ШЇЩЉШЇШ©..."
+msgid "Kernel Boot Timeout"
+msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„ШЈЩ‚ШµЩ‰ Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ†Щ€Ш§Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
-"Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш№ШЄЩ…Ш§ШЇШ§Щ‹ Ш№Щ„Щ‰ Ш·Ш±Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш© ЩЃШіЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш­Щ€Ш§Щ„ЩЉ %d "
-"Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ Щ…Щ† Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЄЩ†ШµЩЉШЁ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©Шџ\n"
+"ЩЉЩ…ЩѓЩ† Щ„ШЁШ·Ш§Щ‚ШЄЩѓ Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ ШЇШ№Щ… Щ„Щ„ШЄШіШ±ЩЉШ№ Ш«Щ„Ш§Ш«ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ Щ„ЩѓЩ† ЩЃЩ‚Ш· Щ…Ш№ XFree %s.\n"
+"ШЁШ·Ш§Щ‚ШЄЩѓ Щ…ШЇШ№Щ€Щ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ XFree %s Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЇШ№Щ€Щ…Ш© ШЁШґЩ„ ШЈЩЃШ¶Щ„ ЩЃЩЉ Ш§Щ„Щ€Ш¶Ш№ "
+"Ш«Щ†Ш§Ш¦ЩЉ Ш§Щ„ШЈШЁШ№Ш§ШЇ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш© ШЈШ№Щ„Ш§Щ‡Шџ\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Ш№Ш«Ш± Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШЄШ¬ШІШ¦Ш© ЩЃЩЉ DrakX Ш№Щ„Щ‰ Ш§Щ„Ш­Щ„Щ€Щ„ Ш§Щ„ШЄШ§Щ„ЩЉШ©:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©Шџ\n"
+msgid "Hungarian"
+msgstr "Ш§Щ„Щ…Ш¬Ш±ЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
-"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш© ШЈШ№Щ„Ш§Щ‡ ШЈЩ… Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© "
-"Ш§Щ„Щ…Ш­Щ„ЩЉШ©Шџ\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ЩѓЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© Щ€ ШЄШ№Щ…Щ„).\n"
+"Ш§Ш®ШЄШ± Щ…Щ€ЩЃШ± Ш§Щ„Ш®ШЇЩ…Ш© Ш§Щ„Ш®Ш§Шµ ШЁЩѓ.\n"
+"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Щ…Щ€Ш¬Щ€ШЇШ§Щ‹ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©, Ш§Ш®ШЄШ± ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Щ„Ш№Ш«Щ€Ш± Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш§ШЄ Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "ШЄШІШ§Щ…Щ† Щ€Щ‚ШЄ ШўЩ„ЩЉ (ШЁШ§ШіШЄШ®ШЇШ§Щ… NTP)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"ШЄЩ€Ш¬ШЇ %d Ш·Ш§ШЁШ№Ш§ШЄ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ© Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
+msgid "8 MB"
+msgstr "8 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"ШЄЩ€Ш¬ШЇ Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ© Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
+msgid "LDAP Server"
+msgstr "Ш®Ш§ШЇЩ… LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
-"\n"
-"%s%s\n"
-"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
+"ШЇШ№Щ… PCMCIA Щ…Щ‡Щ… Щ„ШЇШ№Щ… ШЈШґЩЉШ§ШЎ Щ…Ш«Щ„ ШЁШ·Ш§Щ‚Ш§ШЄ Ш§Щ„ШҐЩЉШ«Ш±Щ†ШЄ Щ€\n"
+"Ш§Щ„Щ…Щ€ШЇЩ…Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЇЩЃШЄШ±ЩЉШ©. Щ„Щ† ЩЉШЄЩ… ШЁШЇШЎ Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© Ш§Щ„Ш§ Ш№Щ†ШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Щ„Ш°Ш§ ЩЃЩ„Ш§ "
+"Щ…ШіЩѓЩ„Ш© Ш№Щ†ШЇ ШЄШґШєЩЉЩ„Щ‡\n"
+"Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЄЩЉ Щ„Ш§ ШЄШ­ШЄШ§Ш¬Щ‡."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
-"\n"
-"%s%s\n"
-"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
+msgid "Choose your country"
+msgstr "ШҐШ®ШЄШ± ШЁЩ„ШЇЩѓ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The following printers\n"
 "\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
 msgstr ""
-"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
 "\n"
-"%s%s\n"
-"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "Щ€ %d Ш·Ш§ШЁШ№Ш§ШЄ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ©"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and one unknown printer"
-msgstr "Щ€ Ш·Ш§ШЁШ№Ш© ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ©"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Checking your system..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ†ШёШ§Щ…Щѓ..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting CUPS..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ CUPS..."
+"-Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„Щ†Щ‘ШёШ§Щ…  :\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Ш®Ш§ШЇЩ… Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
+msgid "Standalone Tools"
+msgstr "Ш§Щ„ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…Щ†ЩЃШµЩ„Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "ШЈЩ…Ш«Щ„Ш© Щ„Ш№Щ†Ш§Щ€ЩЉЩ† IP ШµШ­ЩЉШ­Ш©:\n"
+msgid "Where"
+msgstr "ШЈЩЉЩ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Щ…ШЇЩЏШ®Щ„ ШєЩЉШ± ШµШ­ЩЉШ­.\n"
+msgid "but not matching"
+msgstr "Щ„ЩѓЩ† Щ„ЩЉШі Щ…Щ€Ш§Ш¦Щ…Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Server IP missing!"
-msgstr "IP Ш§Щ„Ш®Ш§ШЇЩ… Щ…ЩЃЩ‚Щ€ШЇ!"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
+msgstr "ЩЉЩ…ЩѓЩ†Щѓ Щ‡Щ†Ш§ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„ ШЁШЇЩЉЩ„ (ALSA ШЈЩ€ OSS) Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "Configuring PCMCIA cards..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© ШЁШ·Ш§Щ‚Ш§ШЄ PCMCIA..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr "ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† IP Щ€ Щ…Щ†ЩЃШ° Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш§ШЄЩ‡."
+msgid "kdesu missing"
+msgstr "kdesu missing"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Encryption key"
+msgstr "Щ…ЩЃШ§ШЄШ­ Ш§Щ„ШЄШґЩЃЩЉШ±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Remove selected server"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Edit selected server"
-msgstr "Ш­Ш±Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+msgid "Christmas Island"
+msgstr "Ш¬ШІШ± Ш§Щ„ЩѓШ±ЩЉШіЩ…Ш§Ші"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add server"
-msgstr "Ш§Ш¶ЩЃ Ш®Ш§ШЇЩ…"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№. ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
-"ШЈШЇШ®Щ„ Щ‡Щ†Ш§ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш§ШЄЩ‡Ш§. ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш№Щ…Щ„ Ш°Щ„Щѓ ЩЃЩ‚Ш· Ш§Щ† Щ„Щ… "
-"ШЄЩ‚Щ… Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ ШЁЩ†ШґШ± Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
+msgid "EIDE/SCSI channel"
+msgstr "Щ‚Щ†Ш§Ш© EIDE/SCSI"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ©:"
+msgid "Set this printer as the default"
+msgstr "Ш№ЩЉЩ‘Щ† Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
+msgid "partition %s"
+msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш© %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Щ…ШЇЩЏШ®Щ„ Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© ШєЩЉШ± ШµШ­ЩЉШ­.\n"
+msgid "Paranoid"
+msgstr "Щ…Ш±ШЄЩЃШ№ Ш¬ШЇШ§"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Host/network IP address missing."
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Щ…ЩЃЩ‚Щ€ШЇ."
+msgid "NIS"
+msgstr "NIS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШґШЁЩѓШ© ШЈЩ€ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡:"
+msgid "<-- Del User"
+msgstr "<-- Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sharing of local printers"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid "Location on the bus"
+msgstr "Ш§Щ„Щ…ЩѓШ§Щ† Ш№Щ„Щ‰ Ш§Щ„ЩЂbus"
 
+#
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove selected host/network"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
+msgid "No printer found!"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Ш·Ш§ШЁШ№Ш©!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
-msgstr "Ш­Ш±Щ‘Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
+msgid "the vendor name of the device"
+msgstr "Ш§ШіЩ… Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш¬Щ‡Ш§ШІ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr "ШЈШ¶ЩЃ Щ…ШіШЄШ¶ЩЉЩЃ/ШґШЁЩѓШ©"
+msgid "Erase entire disk"
+msgstr "Ш§Щ…ШіШ­ ЩѓЩ„ Ш§Щ„Щ‚Ш±Шµ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Щ‡Ш°Щ‡ Щ‡ЩЉ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Щ€ Ш§Щ„ШґШЁЩѓШ§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш§:"
+msgid " (Default)"
+msgstr " (Ш§ЩЃШЄШ±Ш§Ш¶ЩЉ)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
-"Ш№Щ†ШЇ ШЄШґШєЩЉЩ„ Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±, ЩЃШ№Щ†ШЇ ЩѓЩ„ ШЁШЇШ§ЩЉШ© ШЄШґШєЩЉЩ„ Щ„ЩЂCUPS ШіЩЉШЄЩ… Ш§Щ„ШЄШЈЩѓШЇ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Щ…Ш§\n"
-"\n"
-"- Ш§Ш°Ш§ ЩѓШ§Щ† LPD/LPRng Щ…Ш«ШЁШЄШ§Щ‹, Щ„Щ† ШЄШЄЩ… Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩ€Щ‚ /etc/printcap Ш№Щ† Ш·Ш±ЩЉЩ‚ CUPS\n"
-"\n"
-"- Ш§Ш°Ш§ ЩѓШ§Щ† /etc/cups/cupsd.conf Щ…ЩЃЩ‚Щ€ШЇ, ШіЩЉШЄЩ… Ш§Щ†ШґШ§Ш¤Щ‡ ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„\n"
-"\n"
-"- Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ†ШґЩ€Ш±Ш©, ШЈЩЉ ШЈЩ†Щ‡Ш§ Щ„Ш§ ШЄШ­ШЄЩ€ЩЉ \"localhost\" ЩѓШҐШіЩ… "
-"Щ„Щ„Ш®Ш§ШЇЩ….\n"
+"Arguments: ()\n"
 "\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШЁШ№Ш¶ Щ‡Ш°Щ‡ Ш§Щ„ШҐШ¬Ш±Ш§ШЎШ§ШЄ Щ‚ШЇ ШЄШіШЁШЁШЄ ШЁЩ…ШґШ§ЩѓЩ„ Щ„Щѓ, Ш№Ш·Щ‘Щ„ Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±, Щ„ЩѓЩ† ЩЃЩЉ Щ‡Ш°Щ‡ "
-"Ш§Щ„Ш­Ш§Щ„ Ш№Щ„ЩЉЩѓ Ш§Щ„ШҐЩ†ШЄШЁШ§Щ‡ Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш§Ш·."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "ШЄШµШ­ЩЉШ­ ШўЩ„ЩЉ Щ„ШЄЩ‡ЩЉШ¦Ш© CUPS"
+msgid "Automatic reconfiguration"
+msgstr "Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©"
+msgid "Receiving Speed:"
+msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШіШЄЩ‚ШЁШ§Щ„"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-"Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЄШ­ШЄШ§Ш¬ ЩЃЩ‚Ш· Ш§Щ„Щ‰ "
-"ШЄШґШєЩЉЩ„ Ш®ЩЉШ§Ш± \"Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©\"; ШіШЄЩ‚Щ€Щ… "
-"Ш®Ш§ШЇЩ…Ш§ШЄ CUPS ШЁШҐШ№Щ„Ш§Щ… Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш№Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ„ШЇЩЉЩ‡Ш§. ЩѓШ§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ… "
-"Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„ЩЉЩ‡Ш§ Щ…Щ† Щ‚ЩђШЁЩ„ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©\" Ш№Щ„Щ‰ Щ†Ш§ЩЃШ°Ш© "
-"Printerdrake Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Ш®Ш§ШЇЩ…Ш§ШЄ CUPS ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ©, ЩЃШ№Щ„ЩЉЩѓ ШЈЩ† "
-"ШЄЩ‚Щ€Щ… ШЁШҐШЇШ®Ш§Щ„ Ш№Щ†Ш§Щ€ЩЉЩ† IP Щ€ ШЈШ±Щ‚Ш§Щ… Ш§Щ„Щ…Щ†Ш§ЩЃШ° (Ш§Ш®ШЄЩЉШ§Ш±ЩЉ) Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ "
-"Щ…Щ† Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ."
+msgid "Turks and Caicos Islands"
+msgstr "Ш¬ШІШ± Ш§Щ„ШЄШ±Щѓ Щ€ Ш§Щ„ЩѓШ§ЩЉЩѓЩ€Ші"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "None"
-msgstr "Щ€Щ„Ш§ ШґШ¦"
+msgid "permissions"
+msgstr "Ш§Щ„ШЄШµШ§Ш±ЩЉШ­"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Additional CUPS servers: "
-msgstr "Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "No remote machines"
-msgstr "Щ„Ш§ ШЈШ¬Щ‡ШІШ© ШЁШ№ЩЉШЇШ©"
+msgid "<- Previous"
+msgstr "<- Ш§Щ„ШіШ§ШЁЩ‚ "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Custom configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Щ…Ш®ШµШµШ©"
+msgid "Internet Connection Sharing configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Щ…ШґШ§Ш±ЩѓШ© ШҐШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ/Ш§Щ„ШґШЁЩѓШ§ШЄ: "
+msgid "Toggle between flat and group sorted"
+msgstr "Toggle between flat and group sorted"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ШўЩ„ЩЉШ§Щ‹"
+msgid "Themes"
+msgstr "Ш§Щ„ШіЩ…Ш§ШЄ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЈШ®Ш±Щ‰"
+msgid "Options: %s"
+msgstr "Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ШЈЩ† ШЄЩ‚Ш±Ш± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЁШ№ЩЉШЇШ© ШЈЩ† "
-"ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© ШўЩ„ЩЉШ§Щ‹ Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©."
+"ШЈЩ†ШЄ ШЄШіШЄШ®ШЇЩ… %s ЩѓЩ…ШЇЩЉШ± Ш§Щ‚Щ„Ш§Ш№ Ш­Ш§Щ„ЩЉШ§.\n"
+"Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Щ„ШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШҐШ№ШЇШ§ШЇ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШ®ШЄШ§Ш± Ш§Ш°Ш§ ЩѓШ§Щ† ЩЉШ¬ШЁ Щ„Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© "
-"Щ„Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©."
+msgid "OKI winprinter configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ OKI WinPrinter"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Щ…ШґШ§Ш±ЩѓШ© Ш·Ш§ШЁШ№Ш§ШЄ CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "ШіШ§Щ†ШЄ Щ‡ЩЉЩ„Ш§Щ†Ш©"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Щ„ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ (Щ…Ш­Щ„ЩЉШ©, TCP/Socket, Щ€ SMB)"
+msgid "Security Level"
+msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"ШЁШ№Ш¶ Ш§Щ„Ш®Ш·Щ€Ш§ШЄ Щ„Щ… ЩЉШЄЩ… ШЄЩѓЩ…Щ„ШЄЩ‡Ш§.\n"
 "\n"
-"Щ„Ш§ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ©; Щ‡Ш°Щ‡ Ш§Щ„ЩѓШ§ШЁШ№Ш§ШЄ ЩЉЩ…ЩѓЩ† "
-"Ш§ЩѓШЄШґЩ„ЩЃЩ‡Ш§ ШўЩ„ЩЉШ§Щ‹."
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Ш®Ш±Щ€Ш¬ Ш§Щ„ШўЩ† ЩЃШ№Щ„Ш§Щ‹Шџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Щ…Ш§ Щ‡ЩЉ Ш·Ш±ЩЉЩ‚Ш© ШЄЩ€ШµЩЉЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш©Шџ"
+msgid "Sudan"
+msgstr "Ш§Щ„ШіЩ€ШЇШ§Щ†"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Ш§Ш®ШЄШ± Щ€ШµЩ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш©"
+msgid "Polish (qwertz layout)"
+msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ© (qwertz layout)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "ШіЩ€Ш±ЩЉШ©"
 
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the user umask."
-msgstr ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-"Arguments: (val)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
+msgid "Portuguese"
+msgstr "Ш§Щ„ШЁШ±ШЄШєШ§Щ„ЩЉШ©"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr "if set to yes, check additions/removals of sgid files."
+msgid "Loopback file name: "
+msgstr "Ш§ШіЩ… Щ…Щ„ЩЃ Loopback: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr "if set to yes, check open ports."
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "Ш№Щ†Щ€Ш§Щ† Ш®Ш§ШЇЩ… DNS ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
-"if set, send the mail report to this email address else send it to root."
+msgid "Serbia"
+msgstr "ШµШ±ШЁЩЉШ§"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "if set to yes, report check result by mail."
+msgid "Newzealand"
+msgstr "Щ†ЩЉЩ€ШІЩЉЩ„Щ†ШЇШ§ "
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr "if set to yes, check files/directories writable by everybody."
+msgid "This directory should remain within the root filesystem"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„ШЇЩ„ЩЉЩ„ ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† ЩЃЩЉ Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш¬Ш°Ш±ЩЉ"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "if set to yes, reports check result to tty."
+msgid "CapsLock key"
+msgstr "Щ…ЩЃШЄШ§Ш­ CapsLock"
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr "if set to yes, run some checks against the rpm database."
+msgid "Install bootloader"
+msgstr "ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘ЩђЩ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr "if set to yes, check if the network devices are in promiscuous mode."
+msgid "Select the memory size of your graphics card"
+msgstr "ШҐШ®ШЄШ± Ш­Ш¬Щ… Ш°Ш§ЩѓШ±Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШ§ШґШ©"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
+msgstr ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
+msgstr "Dynamic IP Address Pool:"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
+msgstr "Ш§ШіЩ… LVMШџ"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgstr "ШЄЩ…ШЄ Ш§ШІШ§Щ„Ш© ШЁШ№Ш¶ Ш§Щ„ШЈШ¬Щ‡ШІШ© ЩЃЩЉ ЩЃШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ \"%s\":\n"
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Found %s %s interfaces"
+msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ %s %s Щ€Ш§Ш¬Щ‡Ш§ШЄ"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr "if set to yes, run the daily security checks"
+msgid "sticky-bit"
+msgstr "sticky-bit"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr "if set to yes, verify checksum of the suid/sgid files."
+msgid "Post Install"
+msgstr "Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr "if set to yes, check empty password in /etc/shadow."
+msgid "The internal domain name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚ Ш§Щ„ШЇШ§Ш®Щ„ЩЉ"
 
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr "if set to yes, report unowned files."
+msgid "Card IRQ"
+msgstr "Card IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (umask)\n"
 "\n"
-"Set the root umask."
+"Set the user umask."
 msgstr ""
 "Arguments: (umask)\n"
 "\n"
-"Set the root umask."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
-msgstr ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Ш§Ш®ШЄШ± ШіЩ€Ш§Щ‚Ш© Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„Щ…Ш±Щ†Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„Ш№Щ…Щ„ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "LILO with text menu"
+msgstr "LILO Щ…Ш№ Щ‚Ш§Ш¦Щ…Ш© Щ†ШµЩЉШ©"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "Everything (no firewall)"
+msgstr "ЩѓЩ„ ШґШ¦ (Щ„Ш§ Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ)"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "You must specify a kernel image"
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЇШЇ ШµЩ€Ш±Ш© Ш§Щ„Щ†Щ€Ш§Ш©"
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid ", multi-function device on USB"
+msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш№Щ„Щ‰ Щ…Щ†ЩЃШ° USB"
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Do"
+msgstr "Ш§ЩЃШ№Щ„"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„Щ…Ш±ШўШ© Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©..."
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+msgid "Lithuanian AZERTY (old)"
+msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© AZERTY (Щ‚ШЇЩЉЩ…)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Brazilian (ABNT-2)"
+msgstr "Ш§Щ„ШЁШ±Ш§ШІЩЉЩ„ЩЉШ© (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "IP address of host/network:"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ©:"
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШµШ§ШЇЩЉ Щ„Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„ШЈШ№Щ„Щ‰\n"
+"Щ„ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "System installation"
+msgstr "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "Saint Vincent and the Grenadines"
+msgstr "ШіШ§Щ†ШЄ ЩЃЩЉЩ†ШіЩ†ШЄ Щ€ Ш§Щ„ШєШ±ЩЉЩ†Ш§ШЇЩЉЩ†"
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "/File/_Open"
+msgstr "/Щ…Щ„ЩЃ/_ЩЃШЄШ­"
 
 #: ../../security/help.pm:1
 #, c-format
@@ -12585,1075 +12460,753 @@ msgstr ""
 "The argument specifies if clients are authorized to connect\n"
 "to the X server on the tcp port 6000 or not."
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Location of auto_install.cfg file"
+msgstr "Ш§Щ„Щ…ЩѓШ§Щ† Ш№Щ„Щ‰ Щ…Щ„ЩЃ install.cfg"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Delay"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "Hungary"
+msgstr "Ш§Щ„Щ…Ш¬Ш±"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Total progess"
+msgstr "Ш§Ш¬Щ…Ш§Щ„ЩЉ Ш§Щ„ШЄЩ‚ШЇЩ…"
 
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Accept/Refuse bogus IPv4 error messages."
+msgid "Color configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЈЩ„Щ€Ш§Щ†"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ… (Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„ ШЈЩ€ Ш§Щ„ШЁШ±ШЇЩЉ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ)"
+msgid "New Zealand"
+msgstr "Щ†ЩЉЩ€ШІЩЉЩ„Щ†ШЇШ§"
 
 #: ../../security/level.pm:1
 #, c-format
 msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr "Щ…ЩѓШЄШЁШ© ШЄШ­Щ…ЩЉ Щ…Щ† Щ‡Ш¬Щ…Ш§ШЄ buffer overflow Щ€ format string"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Use libsafe for servers"
-msgstr "ШҐШіШЄШ®ШЇЩ… libsafe Щ„Щ„Щ…Щ„Щ‚Щ…Ш§ШЄ"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Security level"
-msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr ""
+"ШЄЩ€Ш¬ШЇ ШЁШ№Ш¶ Ш§Щ„Щ‚ЩЉЩ€ШЇ, ЩѓЩ…Ш§ ЩЉШЄЩ… ШЄШґШєЩЉЩ„ ШЁШ±Ш§Щ…Ш¬ Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Щ†ШёШ§Щ… ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉШ§Щ‹ ЩѓЩ„ Щ„ЩЉЩ„Ш©."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose the desired security level"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ† Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇЩ‡"
+msgid "please choose the date to restore"
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЄШ§Ш±ЩЉШ® Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DrakSec Basic Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ DrakSec Ш§Щ„ШЈШіШ§ШіЩЉШ©"
+msgid "Switching from ext2 to ext3"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШєЩЉЩЉШ± Щ…Щ† ext2 Ш§Щ„Щ‰ ext3"
 
-#: ../../security/level.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Щ‡Ш°Ш§ Щ…Щ…Ш§Ш«Щ„ Щ„Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШіШ§ШЁЩ‚, Щ€ Щ„ЩѓЩ† Ш§Щ„Щ†ШёШ§Щ… Щ…ШєЩ„Щ‚ ЩѓЩ„ЩЉШ§Щ‹ Щ€ Ш§Щ„Щ…ШІШ§ЩЉШ§ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Щ„Щ‰ Ш­ШЇЩ‡Ш§ "
-"Ш§Щ„ШЈЩ‚ШµЩ‰."
+msgid "LPRng"
+msgstr "LPRng"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"ШЁЩ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ, ЩЉЩѓЩ€Щ† Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШµШЁШ­ Щ…Щ…ЩѓЩ†Ш§Щ‹.\n"
-"Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ШЁШґЩѓЩ„ ЩѓШ§ЩЃЩЉ Щ„Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШіШЄШ·ЩЉШ№ Щ‚ШЁЩ€Щ„\n"
-"Ш§ШЄШµШ§Щ„Ш§ШЄ Щ…Щ† Ш№Щ…Щ„Ш§ШЎ ЩѓШ«ЩЉШ±ЩЉЩ†. Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Щ…Ш¬Ш±ШЇ Ш№Щ…ЩЉЩ„ Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
-"ЩЃШ§Щ„ШЈШ¬ШЇШ± ШЁЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ ШЈЩ‚Щ„."
+msgid "Netherlands Antilles"
+msgstr "ШЈЩ†ШЄЩЉЩ„ Щ‡Щ€Щ„Щ†ШЇШ§"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"ШЄЩ€Ш¬ШЇ ШЁШ№Ш¶ Ш§Щ„Щ‚ЩЉЩ€ШЇ, ЩѓЩ…Ш§ ЩЉШЄЩ… ШЄШґШєЩЉЩ„ ШЁШ±Ш§Щ…Ш¬ Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Щ†ШёШ§Щ… ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉШ§Щ‹ ЩѓЩ„ Щ„ЩЉЩ„Ш©."
+msgid "Browse to new restore repository."
+msgstr "Ш§ШіШЄШ№Ш±Ш¶ Ш§Щ„Щ‰ Щ…ШіШЄЩ€ШЇШ№ Ш§ШіШЄШ№Ш§ШЇШ© Ш¬ШЇЩЉШЇ."
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
-"Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Щ„Щ„Ш­Ш§ШіЩ€ШЁ Ш§Щ„Ш°ЩЉ ШіЩЉШіШЄШ®ШЇЩ… Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩѓШ№Щ…ЩЉЩ„."
+"\n"
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
+"\n"
+"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ€ Ш§Щ„ШЁШ№ЩЉШЇШ© Щ„ЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ…Щ† Щ‡Ш°Щ‡ "
+"Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Щ€ Щ€ Щ…Щ† Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ©.\n"
+"\n"
+"ЩЉШіШЈЩ„Щѓ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Ш№Щ† ЩѓЩ„ Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ© Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ ШЄШ№Ш·ЩЉЩѓ Ш§Щ„Щ‚ШЇШ±Ш© Ш№Щ„Щ‰ "
+"Ш§Щ„Щ€ШµЩ€Щ„ Щ„ЩѓЩ„ Щ…ШґШєЩ„Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШґШєЩ„Ш§ШЄ Щ€ ШЈЩ†Щ€Ш§Ш№ Щ€ШµЩ„Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©."
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
-msgstr "ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± Щ…Щ…ЩѓЩ‘Щ†Ш© Ш§Щ„ШўЩ†, Щ„ЩѓЩ† Ш§Щ„Ш§ШіШЄШ®ШЇШ§Щ… ЩѓШ­Ш§ШіШЁ ЩЃЩЉ ШґШЁЩѓШ© ЩЉШІШ§Щ„ ШєЩЉШ± Щ…ЩЃШ¶Щ‘Щ„."
+msgid "and %d unknown printers"
+msgstr "Щ€ %d Ш·Ш§ШЁШ№Ш§ШЄ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ©"
 
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
-"ЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ ШЁШ­Ш°Ш±. ЩЃЩ‡Щ€ ЩЉШ¬Ш№Щ„ Щ†ШёШ§Щ…Щѓ ШЈШіЩ‡Щ„ ЩЃЩЉ Ш§Щ„ШҐШіШЄШ®ШЇШ§Щ…,\n"
-"Щ„ЩѓЩ† ЩЉЩ…Щ€Щ† Ш­ШіШ§ШіШ§Щ‹ Ш¬ШЇШ§Щ‹. Щ„Ш°Ш§ Щ„Ш§ ЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄШµЩ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЈШ®Ш±Щ‰\n"
-"ШЈЩ€ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ. Щ„Ш§ ЩЉЩ€Ш¬ШЇ ШЇШ®Щ€Щ„ ШЁЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Щ…Ш±ШЄЩЃШ№ Ш¬ШЇШ§"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш§ШЄ ISDN PCI. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ€Ш§Ш­ШЇШ© ЩЃЩЉ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©."
 
-#: ../../security/level.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Higher"
-msgstr "Щ…Ш±ШЄЩЃШ№ ШЈЩѓШ«Ш±"
+msgid "GB"
+msgstr "ШєЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "High"
-msgstr "Щ…Ш±ШЄЩЃШ№"
+msgid "Please give a user name"
+msgstr "Ш±Ш¬Ш§ШЎЩ‹ Щ‚Щ… ШЁШҐШ№Ш·Ш§ШЎ Ш§ШіЩ… Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "ЩЃЩ‚ЩЉШ±"
+msgid "Enable CD Boot?"
+msgstr "ШЄЩ…ЩѓЩЉЩ† Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬Шџ"
 
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Щ…Ш±Ш­ШЁШ§ ШЁШ§Щ„Щ…Ш®ШЄШ±Щ‚ЩЉЩ†"
+msgid " enter `void' for void entry"
+msgstr " enter `void' for void entry"
 
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "ЩЉШ±Ш¬Щ‰ Ш§Ш№Ш§ШЇШ© ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ %s Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄ"
+msgid "on Hard Drive"
+msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ‘Щ„ШЁ"
 
-#: ../../standalone/XFdrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "ЩЉШ±Ш¬Щ‰ ШЄШіШ¬ЩЉЩ„ Ш§Щ„Ш®Ш±Щ€Ш¬ Ш«Щ… Ш§ШіШЄШ®ШЇЩ… Ctrl-Alt-BackSpace"
+msgid "Winmodem connection"
+msgstr "Щ€ШµЩ„Ш© Winmodem"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
-msgstr "/etc/hosts.allow Щ€ /etc/hosts.deny Щ…Ш№ШЇЩ‘Ш§Щ† Щ…ШіШЁЩ‚Ш§Щ‹ - Щ„Щ… ЩЉШЄЩ… Ш§Щ„ШЄШєЩЉЩЉШ±"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
+msgstr ""
+"\n"
+"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, ШЄЩ… ШЄШ«ШЁЩЉШЄ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш·Ш§ШЁШ№ШЄЩѓ!\n"
+"\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Ш·ШЁШ§Ш№Ш© ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЈЩ…Ш± \"Ш§Ш·ШЁШ№\" ЩЃЩЉ ШЄШ·ШЁЩЉЩ‚Ш§ШЄЩѓ (Ш№Ш§ШЇШ© ЩЃЩЉ Щ‚Ш§Ш¦Щ…Ш© \"Щ…Щ„ЩЃ\").\n"
+"\n"
+"Ш§Ш°Ш§ ШЈШ±ШЇШЄ Ш§Ш¶Ш§ЩЃШ© ШЈЩ€ Ш­Ш°ЩЃ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄШіЩ…ЩЉШ© Ш·Ш§ШЁШ№Ш©, ШЈШ© Ш§Ш°Ш§ ШЈШ±ШЇШЄ ШЄШєЩЉЩЉШ± Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш© "
+"Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ© (Ш¬Щ€ШЇШ© Ш§Щ„Ш·ШЁШ§Ш№Ш©, ШЄШєЩЉЩЉШ± Ш§Щ„Ш­ШЁШ±, ...), Ш§Ш®ШЄШ± \"Ш§Щ„Ш·Ш§ШЁШ№Ш©\" ЩЃЩЉ Щ‚ШіЩ… \"Ш§Щ„Ш№ШЄШ§ШЇ"
+"\" ЩЃЩЉ Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake."
 
-#: ../../standalone/drakTermServ:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Щ„Ш§ Ш­Ш§Ш¬Ш© Ш§Щ„Щ‰ Ш§Щ†ШґШ§ШЎ /etc/dhcpd.conf ШЈЩ€Щ„Ш§Щ‹!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Ш­ШµЩ„ ШґШ¦ Ш®Ш·ШЈ! - Щ‡Щ„ ШЄЩ… ШЄШ«ШЁЩЉШЄ mkisofs?"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr "Ш§Щ„ШўЩ† ЩЉЩ…ЩѓЩ†Щѓ ШЄШґШєЩЉЩ„ XawTV (ЩЃЩЉ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©!) !\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
-msgstr "Etherboot ISO image Щ‡ЩЉ %s"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ШЄШЁШЇЩЉЩ„ ЩѓШ§ЩЃЩЉШ© Щ„Щ„Щ‚ЩЉШ§Щ… ШЁШ§Щ„ШЄШ«ШЁЩЉШЄ, ЩЃШ¶Щ„Ш§Щ‹ ШІШЇ Щ…ШіШ§Ш­Ш© Ш§Щ„ШЄШЁШЇЩЉЩ„"
 
-#: ../../standalone/drakTermServ:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No floppy drive available!"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШіЩ€Ш§Щ‚Ш© Щ‚Ш±Шµ Щ…Ш±Щ†!"
+msgid "%s on %s"
+msgstr "%s Ш№Щ„Щ‰ %s"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr "ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„ШўЩ†"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
+"ЩЉЩ‚Щ€Щ… Щ„ЩЉЩ†ЩѓШі ШЁШҐШЇШ§Ш±Ш© Ш§Щ„Щ€Щ‚ШЄ Ш­ШіШЁ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ Ш«Щ… ЩЉШЄШ±Ш¬Щ…Щ‡ Ш§Щ„Щ‰\n"
+"Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ Ш­ШіШЁ Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШІЩ…Щ†ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§. Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„ШіШ§Ш№Ш©\n"
+"Ш§Щ„ШЄЩЉ ЩЃЩЉ Ш§Щ„Щ„Щ€Ш­Ш© Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ© Щ…Ш¶ШЁЩ€Ш·Ш© Ш№Щ„Щ‰ Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ, ЩЉЩ…ЩѓЩ†Щѓ Ш§ШІШ§Щ„Ш© ШЄЩ†ШґЩЉШ· Ш°Щ„Щѓ\n"
+"Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† \"ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш¶ШЁЩ€ШёШ© Ш№Щ„Щ‰ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ\" Щ€ Ш§Щ„ШЄЩЉ "
+"ШіШЄШ¬Ш№Щ„\n"
+"Щ„ЩЉЩ†ЩѓШі ЩЉШ№Щ„Щ… ШЈЩ† ШіШ§Ш№Ш© Ш§Щ„Щ†ШёШ§Щ… Щ€ ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Ш№Щ„Щ‰ Щ†ЩЃШі Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ. Щ‡Ш°Ш§\n"
+"Щ…ЩЃЩЉШЇ Ш№Щ†ШЇЩ…Ш§ ШЄШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± Щ…Ш«Щ„ Windows.\n"
+"\n"
+"Ш®ЩЉШ§Ш± \"ШЄШІШ§Щ…Щ† ШўЩ„ЩЉ Щ„Щ„Щ€Щ‚ШЄ\" ШіЩЉЩ‚Щ€Щ… ШўЩ„ЩЉШ§Щ‹ ШЁШ¶ШЁШ· Ш§Щ„ШіШ§Ш№Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+"Ш§?ШЄШµШ§Щ„ ШЁШ®Ш§ШЇЩ… Щ€Щ‚ШЄ ШЁШ№ЩЉШЇ Ш№Щ„Щ‰ Ш§?Щ†ШЄШ±Щ†ШЄ. ЩѓЩЉ ШЄШ№Щ…Щ„ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©,\n"
+"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ Ш№Ш§Щ…Щ„Ш©. Щ…Щ† Ш§?ЩЃШ¶Щ„ Ш§Ш®ШЄЩЉШ§Ш± Ш®Ш§ШЇЩ…\n"
+"Ш§Щ„Щ€Щ‚ШЄ Ш§?Щ‚Ш±ШЁ Ш§Щ„ЩЉЩѓ. Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш± ЩЉШ«ШЁШЄ Ш®Ш§ШЇЩ… Щ€Щ‚ШЄ\n"
+"ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§?Ш®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Couldn't access the floppy!"
-msgstr "ШЄШ№Ш°Ш± Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ†!"
+msgid "Which is your timezone?"
+msgstr "Щ…Ш§ Щ‡ЩЉ Щ…Щ†Ш·Щ‚ШЄЩѓ Ш§Щ„ШІЩ…Щ†ЩЉШ©Шџ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please insert floppy disk:"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ†:"
+msgid "Guinea"
+msgstr "ШєЩЉЩ†ЩЉШ§"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Write Config"
-msgstr "Ш§ЩѓШЄШЁ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
+msgid "The system is now connected to the Internet."
+msgstr "Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„ШўЩ† Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Dynamic IP Address Pool:"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Ш¬Щ€Ш¬ЩЉШ§ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉШ© Щ€ Ш¬ШІШ± ШіШ§Щ†ШЇЩ€ЩЉШЄШґ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉШ©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
-"ШЄЩ… Ш§ШіШЄШ®Ш±Ш§Ш¬ ШЈШєЩ„ШЁ Щ‡Ш°Щ‡ Ш§Щ„Щ‚ЩЉЩ…\n"
-"Щ…Щ† Ш§Щ„Щ†ШёШ§Щ….\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ№ШЇЩЉЩ„ Ш§Ш°Ш§ Ш§Ш­ШЄШ¬ШЄ Щ„Ш°Щ„Щѓ."
+msgid "Japan (broadcast)"
+msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ† (broadcast)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "dhcpd Server Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… dhcpd"
+msgid "Mozambique"
+msgstr "Щ…Щ€ШІЩ…ШЁЩЉЩ‚"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "IP Range End:"
-msgstr "IP Range End:"
+msgid "Icon"
+msgstr "ШЈЩЉЩ‚Щ€Щ†Ш©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IP Range Start:"
-msgstr "IP Range Start:"
+msgid "Please choose what you want to backup"
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ…Ш§ ШЄШ±ЩЉШЇ Щ†ШіШ®Щ‡ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§Щ‹"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Name Servers:"
-msgstr "Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„ШҐШіЩ…:"
+msgid "256 colors (8 bits)"
+msgstr "256 Щ„Щ€Щ† (8 ШЁШЄ)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Domain Name:"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚:"
+msgid "Read-write"
+msgstr "Щ„Щ„Щ‚Ш±Ш§ШЎШ© Щ€ Ш§Щ„ЩѓШЄШ§ШЁШ©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr "Ш№Щ†Щ€Ш§Щ† Broadcast:"
+msgid "Size: %s\n"
+msgstr "Ш§Щ„Ш­Ш¬Щ…: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr "Subnet Mask:"
+msgid "Hostname: "
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ :"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Routers:"
-msgstr "Ш§Щ„Щ…Щ€Ш¬Щ‡Ш§ШЄ:"
+msgid "Chunk size %s\n"
+msgstr "Ш­Ш¬Щ… Chunk %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Netmask:"
-msgstr "Netmask:"
+msgid "Build the future of Linux!"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Subnet:"
-msgstr "Subnet:"
+msgid "Local Printer"
+msgstr "Ш·Ш§ШЁШ№Ш© Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
-"ЩЉШ¬ШЁ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Щ…ШЇЩЉШ± Ш§Щ„Ш№Ш±Ш¶ Щ„ЩѓЩЉ ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄ. \n"
-"(service dm restart - ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "ШЄЩ‡ЩЉШ¦Ш© dhcpd..."
+" Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2001 MandrakeSoft Щ…Щ† ШЇЩ€ШЁЩ€Щ† ШіЩЉШЁШ§ШіШЄЩЉШ§Щ† <dupont_s"
+"\\@epita.fr>"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Delete Client"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш№Щ…ЩЉЩ„"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "<-- Edit Client"
-msgstr "<-- ШЄШ­Ш±ЩЉШ± Ш§Щ„Ш№Щ…ЩЉЩ„"
+msgid "ADSL connection"
+msgstr "Щ€ШµЩ„Ш© ADSL"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add Client -->"
-msgstr "Ш§Ш¶Ш§ЩЃШ© Ш№Щ…ЩЉЩ„ -->"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr "Щ„Ш§ ШЄЩ‡ЩЉШ¦Ш©, Ш§Ш¶ШєШ· Щ…Ш№Ш§Щ„Ш¬ ШЈЩ€ Щ…ШЄЩ‚ШЇЩ….\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Allow Thin Clients"
-msgstr "Ш§ШіЩ…Ш­ Щ„Щ„Ш№Щ…Щ„Ш§ШЎ Ш§Щ„Щ†Ш­Ш§ЩЃ (Thin Clients)"
+msgid "Error!"
+msgstr "Ш®Ш·ШЈ ! "
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Thin Client"
-msgstr "Ш№Щ…ЩЉЩ„ Щ†Ш­ЩЉЩЃ (Thin Client)"
+msgid "cable connection detected"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Щ€ШµЩ„Ш© ЩѓЩЉШЁЩ„"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No net boot images created!"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Щ†ШґШ§ШЎ ШµЩ€Ш± Ш§Щ‚Щ„Ш§Ш№ Ш№ШЁШ± Ш§Щ„ШґШЁЩѓШ©!"
+msgid "Permission denied transferring %s to %s"
+msgstr "ШЄЩ… Ш±ЩЃШ¶ Щ„Ш§ШЄШµШ±ЩЉШ­ ШЁЩ†Щ‚Щ„ %s Ш§Щ„Щ‰ %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "type: %s"
-msgstr "Ш§Щ„Щ†Щ€Ш№: %s"
+msgid "/_Report Bug"
+msgstr "/_ШЄЩ‚Ш±ЩЉШ± Ш®Ш·ШЈ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "<-- Del User"
-msgstr "<-- Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Resize"
+msgstr "ШЄШєЩЉЩЉШ± Ш§Щ„Ш­Ш¬Щ…"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add User -->"
-msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ®ШЇЩ… -->"
+msgid "Dominica"
+msgstr "ШЇЩ€Щ…ЩЉЩ†ЩЉЩѓШ§"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
-msgstr ""
-"!!! ШЄШёЩ‡Ш± Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Щ…Ш®ШЄЩ„ЩЃШ©\n"
-"Ш№Щ† ШЄЩ„Щѓ Ш§Щ„ШЄЩЉ Щ„Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш±ЩЃЩЉШ§ШЄ.\n"
-"Ш§Ш­Ш°ЩЃ/ШЈШ№ШЇ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш±ЩЃЩЉШ§ШЄ Щ„ШЄЩ…ЩѓЩЉЩ† ШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„."
+msgid "Please enter the device name to use for backup"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Delete All NBIs"
-msgstr "Ш§Ш­Ш°ЩЃ ЩѓЩ„ NBI"
+msgid "Resolution: %s\n"
+msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "<-- Delete"
-msgstr "<-- Ш­Ш°ЩЃ"
+msgid "matching"
+msgstr "Ш§Щ„Щ…Щ€Ш§Ш¦Щ…Ш©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "This will take a few minutes."
-msgstr "ШіЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ¶Ш№ ШЇЩ‚Ш§Ш¦Щ‚."
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
+"ШЄШ№Ш°Ш± Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ€Ш­ШЇШ§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Щ€Ш§Ш© Ш§Щ„Щ†ШёШ§Щ… (Ш§Щ„Щ…Щ„ЩЃ %s Щ…ЩЃЩ‚Щ€ШЇ), ШЁШґЩѓЩ„ Ш№Ш§Щ… "
+"ЩЉШ№Щ†ЩЉ Щ‡Ш°Ш§ ШЈЩ† Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„Щ…Ш±Щ† Щ„ЩЉШі Щ…Ш­ШЇЩ‘Ш«Ш§Щ‹ Щ…Ш№ Щ€ШіЩЉШ· Ш§Щ„ШЄШ«ШЁЩЉШЄ (ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐЩ†ШґШ§ШЎ Щ‚Ш±Шµ "
+"Ш§Щ‚Щ„Ш§Ш№ Ш¬ШЇЩЉШЇ)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "Build All Kernels -->"
-msgstr "Ш§ШЁЩ†ЩЉ ЩѓЩ„ Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШµШ­ЩЉШ­. Щ…Ш«Щ„Ш§Щ‹ Щ„Щ…Щ†ЩЃШ° \"COM1\" ЩЃЩЉ\n"
+"Windows Ш§ШіЩ…Щ‡ \"ttys0\" ЩЃЩЉ Щ„ЩЉЩ†ЩѓШі."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "No NIC selected!"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± NIC!"
+msgid "The following packages are going to be removed"
+msgstr "ШіЩЉШЄЩ… Ш­Ш°ЩЃ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr "Ш§ШЁЩ†ЩЉ NIC Щ€Ш§Ш­ШЇШ© -->"
+msgid "Connect to the Internet"
+msgstr "Щ€ШµЩ‘Щ„ ШҐЩ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ "
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Щ†Щ€Ш§Ш©!"
+msgid "Use existing partitions"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Ш§ШЁЩ†ЩЉ ЩѓЩ„ Ш§Щ„Щ†Щ€Ш§Ш© -->"
+msgid "Canadian (Quebec)"
+msgstr "Ш§Щ„ЩѓЩ†ШЇЩЉЩ‘Ш© (ЩѓЩЉШЁЩЉЩѓ)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr "Щ…Щ„ЩЃ ISO Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Mouse device: %s\n"
+msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ЩЃШЈШ±Ш©: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Boot Floppy"
-msgstr "Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Reselect correct fonts"
+msgstr "ШЈШ№ШЇ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„ШµШ­ЩЉШ­Ш©"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
+"Options Description:\n"
 "\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
 "\n"
 msgstr ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
+"Щ€ШµЩЃ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ:\n"
 "\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Щ…Щ† ЩЃШ¶Щ„Щѓ ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹ Ш№Щ†ШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш№ШЁШ± FTP, Щ„ШЈЩ† \n"
+"Ш§Щ„Щ†ШіШ® Ш§Щ„Щ…ШЁЩ†ЩЉШ© Щ…ШіШЁЩ‚Ш§Щ‹ ЩЃЩ‚Ш· Щ‡ЩЉ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§Ш±ШіШ§Щ„Щ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ….\n"
+"Щ„Ш°Ш§ ЩЃШ§Щ„ШўЩ† Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШЁЩ†ЩЉ Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ \n"
+"Ш§Щ„ШµЩ„ШЁ Щ‚ШЁЩ„ Ш§Ш±ШіШ§Щ„Щ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ….\n"
 "\n"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
+"Options\n"
 "\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
-"\n"
-"\n"
-" ШґЩѓШ± Ш®Ш§Шµ:\n"
-"\t- Щ…ШґШ±Щ€Ш№ LTSP http://www.ltsp.org\n"
-"\t- Щ…Ш§ЩЉЩѓЩ„ ШЁШ±Ш§Щ€Щ† <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"ЩЃЩЉ Ш§Щ„Щ†Щ‡Ш§ЩЉШ©, ШіЩЉШЄЩ… ШіШ¤Ш§Щ„Щѓ Ш№Щ† Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЁШЇШЎ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©\n"
+"Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„Щ†ШёШ§Щ…. Щ„Ш§Ш­Ш· ШЈЩ†Щ‡ ШіЩЉШЄЩ… ШіШ¤Ш§Щ„Щѓ Щ‡Ш°Ш§ Ш§Щ„ШіШ¤Ш§Щ„ Ш­ШЄЩ‰ Щ„Щ€ Ш§Ш®ШЄШ±ШЄ Ш№ШЇЩ… Ш§Ш®ШЄШЁШ§Ш±\n"
+"Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, ШЁЩѓЩ„ Щ€Ш¶Щ€Ш­, ШіШЄШ®ШЄШ§Ш± \"Щ„Ш§\" Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ ШіШЄШіШЄШ®ШЇЩ… ЩѓШ¬Щ‡Ш§ШІ\n"
+"Ш®Ш§ШЇЩ…, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ШЄЩ†Ш¬Ш­ ЩЃЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№Ш±Ш¶\n"
+"ШЁШґЩѓЩ„ ШµШ­ЩЉШ­."
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
-"\n"
-" Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2002 Щ„ЩЂMandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "We are now going to configure the %s connection."
+msgstr "Щ†Ш­Щ† Ш§Щ„ШўЩ† ШіЩ†Щ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш© %s."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Add/Del Clients"
-msgstr "ШЈШ¶ЩЃ/Ш§Ш­Ш°ЩЃ Ш§Щ„Ш№Щ…Щ„Ш§ШЎ"
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert Щ„Щ„ШґШ±ЩѓШ§ШЄ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Add/Del Users"
-msgstr "ШЈШ¶ЩЃ/Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†"
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
+msgstr ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† ШҐЩЉШ¬Ш§ШЇ ШЈЩЉ Ш®Ш·.\n"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Net Boot Images"
-msgstr "ШµЩ€Ш± Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Language"
+msgstr "Ш§Ш®ШЄШ± Щ„ШєШЄЩѓ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Etherboot Floppy/ISO"
+msgid "Printer model selection"
+msgstr "ШҐШ®ШЄЩЉШ§Ш± Щ€Ш­ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Stop Server"
-msgstr "ШЈЩ€Щ‚ЩЃ Ш§Щ„Ш®Ш§ШЇЩ…"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "ШЁШ№ШЇ ШЄШєЩЉЩЉШ± Щ†Щ€Ш№ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s, ЩЃШҐЩ†Щѓ ШіШЄШіШ®Ш± ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш©"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Start Server"
-msgstr "Ш§ШЁШЇШЈ Ш§Щ„Ш®Ш§ШЇЩ…"
+msgid "%d seconds"
+msgstr "%d Ш«Щ€Ш§Щ†"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Disable Server"
-msgstr "Ш№Ш·Щ‘Щ„ Ш§Щ„Ш®Ш§ШЇЩ…"
+msgid "Insert a blank floppy in drive %s"
+msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃШ§Ш±Шє ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Enable Server"
-msgstr "Щ…ЩѓЩ‘Щ† Ш§Щ„Ш®Ш§ШЇЩ…"
+msgid "A valid URI must be entered!"
+msgstr "ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„ URI ШµШ§Щ„Ш­!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш·Ш±ЩЃЩЉШ§ШЄ Mandrake"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© \"%s\" Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§Шџ"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Remove the last item"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…Ш§ШЇШ© Ш§Щ„ШЈШ®ЩЉШ±Ш©"
+msgid "Re-configure interface and DHCP server"
+msgstr "ШҐШ№Ш§ШЇШ© ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Щ€ Ш®Ш§ШЇЩ… DHCP"
 
-#: ../../standalone/drakautoinst:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Add an item"
-msgstr "ШЈШ¶ЩЃ Щ…Ш§ШЇШ©"
+msgid "Sound configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto Install"
-msgstr "ШЄШ«ШЁЩЉШЄ ШўЩ„ЩЉ"
+msgid "Photo test page"
+msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© Щ„ШµЩ€Ш±Ш©"
 
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
-"ШЄЩ… ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† ШЁЩ†Ш¬Ш§Ш­.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШ«ШЁЩЉШЄ."
+msgid "Custom disk partitioning"
+msgstr "ШЄШ¬ШІШ¦Ш© Щ…Ш®ШµШµШ©"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Congratulations!"
-msgstr "ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§!"
+msgid "Enter Printer Name and Comments"
+msgstr "ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ€ Ш§Щ„ШЄШ№Щ„ЩЉЩ‚Ш§ШЄ"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
+"The following printers\n"
 "\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
+"Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
 "\n"
-"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ….\n"
-"\n"
-"Щ…Ш№Ш§Щ€Щ…Щ„Ш§ШЄ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚ШіЩ… Ш§Щ„ШЈЩЉШіШ±"
+"%s%s\n"
+"Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Creating auto install floppy"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ"
+msgid "type: %s"
+msgstr "Ш§Щ„Щ†Щ€Ш№: %s"
 
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "manual"
-msgstr "ЩЉШЇЩ€ЩЉ"
+msgid "Slovakian (QWERTY)"
+msgstr "Ш§Щ„ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ© (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ„ЩѓЩ„ Ш®Ш·Щ€Ш© Ш§Ш°Ш§ ЩѓЩ†ШЄ ШіШЄЩ‚Щ€Щ… ШЁШҐШ№Ш§ШЇШЄЩ‡Ш§ ШўЩ„ЩЉШ§Щ‹ ШЈЩ… ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЈЩ† ЩЉЩѓЩ€Щ† Ш§Щ„ШЄШ«ШЁЩЉШЄ "
-"ШЁШґЩѓЩ„ ЩЉШЇЩ€ЩЉ."
+msgid "No Sound Card detected!"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ"
 
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Automatic Steps Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ© Щ„Щ„Ш®Ш·Щ€Ш§ШЄ"
+msgid "Mouse Port"
+msgstr "Щ…Щ†ЩЃШ° Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "replay"
-msgstr "Ш§Ш№Ш§ШЇШ©"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
+msgstr ""
+"ЩЉШ¬ШЁ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Щ…ШЇЩЉШ± Ш§Щ„Ш№Ш±Ш¶ Щ„ЩѓЩЉ ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„ Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄ. \n"
+"(service dm restart - ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Ftp Server"
+msgstr "Ш§Щ„Ш®Ш§ШЇЩ… FTP"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
 "\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
 msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Щ‚Ш±Шµ Щ„Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ. Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© Ш®Ш·Ш±Ш© ШЁШ№Ш¶ Ш§Щ„ШґШ¦ Щ€ ЩЉШ¬ШЁ "
-"Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ ШЁШ­Ш°Ш±.\n"
-"\n"
-"ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© Ш№Щ…Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш°ЩЉ Щ‚Щ…ШЄ ШЁЩ‡ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±, Щ…Ш№ ШЄЩ†ШЁЩЉЩ‡Щѓ "
-"Щ„ШЁШ№Ш¶ Ш§Щ„Ш®Ш·Щ€Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ЩЃЩЉЩ‡Ш§ ШЄШєЩЉЩЉШ± Ш§Щ„Щ‚ЩЉЩ…, Ш­ШЄЩ‰ ШЄШЄЩ…ЩѓЩ† Щ…Щ† ШЄШєЩЉЩЉШ±Щ‡Ш§.\n"
-"\n"
-"Щ„ШЈЩ‚ШµЩ‰ Ш­ШЇ Щ…Щ† Ш§Щ„ШЈЩ…Ш§Щ†, ШіШЄШЄЩ… ШЄШ¬ШІШ¦Ш© Щ€ ШЄШ¬Щ‡ЩЉШІ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ© ШЁШґЩѓЩ„ ШўЩ„ЩЉ, Щ…Ш«Щ„Щ…Ш§ Ш§Ш®ШЄШ±ШЄ "
-"ШЈШ«Щ†Ш§ШЎ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
+"Arguments: (arg)\n"
 "\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©Шџ"
+"Enable/Disable msec hourly security check."
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Auto Install Configurator"
-msgstr "ШЈШЇШ§Ш© Ш§Ш№ШЇШ§ШЇ Ш§Щ„Щ…Ш«ШЁЩ‘ШЄ Ш§Щ„ШўЩ„ЩЉ"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "%s fonts conversion"
+msgstr "ШЄШ­Щ€ЩЉЩ„ Ш®Ш·Щ€Ш· pfm"
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§ЩЉШ¬Ш§ШЇ Щ…Щ„ЩЃ Ш§Щ„ШµЩ€Ш±Ш© `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Щ†Щ€Ш№ Ш§Щ„ЩЂbus Ш§Щ„Щ…Ш±ШЄШЁШ·Ш© ШЁЩ‡ Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error!"
-msgstr "Ш®Ш·ШЈ ! "
+msgid "Uganda"
+msgstr "ШЈЩ€ШєЩ†ШЇШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (size)\n"
 "\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
+"Arguments: (size)\n"
 "\n"
-"Щ…ШґШ§ЩѓЩ„ Ш§ШіШЄШ№Ш§ШЇШ© Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©:\n"
-"\n"
-"ШЈШ«Щ†Ш§ШЎ Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ, ШіЩЉЩ‚Щ€Щ… Drakbackup ШЁШ§Щ„ШЄШЈЩѓШЇ Щ…Щ† ЩѓЩ„ Щ…Щ„ЩЃШ§ШЄ\n"
-"Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ‚ШЁЩ„ Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Ш§.\n"
-"Щ‚ШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© ШіЩЉЩ‚Щ€Щ… drakbackup ШЁШ­Ш°ЩЃ \n"
-"Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„ШЈШµЩ„ЩЉ Щ€ ШіШЄШ®ШіШ± ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩЉ \n"
-"Ш№Щ„ЩЉЩ‡. Щ…Щ† Ш§Щ„Щ…Щ‡Щ… ШЈЩ† ШЄЩѓЩ€Щ† Ш­Ш°Ш±Ш§Щ‹ Щ€ Щ„Ш§ ШЄЩ‚Щ€Щ… ШЁШЄШ№ШЇЩЉЩ„ \n"
-"ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ЩЉШЇЩ€ЩЉШ§Щ‹.\n"
+"Set shell commands history size. A value of -1 means unlimited."
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-msgstr ""
-"Щ€ШµЩЃ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Щ…Щ† ЩЃШ¶Щ„Щѓ ЩѓЩ† Ш­Ш°Ш±Ш§Щ‹ Ш№Щ†ШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш№ШЁШ± FTP, Щ„ШЈЩ† \n"
-"Ш§Щ„Щ†ШіШ® Ш§Щ„Щ…ШЁЩ†ЩЉШ© Щ…ШіШЁЩ‚Ш§Щ‹ ЩЃЩ‚Ш· Щ‡ЩЉ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§Ш±ШіШ§Щ„Щ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ….\n"
-"Щ„Ш°Ш§ ЩЃШ§Щ„ШўЩ† Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШЁЩ†ЩЉ Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ \n"
-"Ш§Щ„ШµЩ„ШЁ Щ‚ШЁЩ„ Ш§Ш±ШіШ§Щ„Щ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ….\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
 "\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
 "\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
 "\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
-"Description:\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Ш¬ШІШ± Ш§Щ„Щ‚Щ…Ш±"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
 "\n"
 "\n"
+"Щ†Ш­Щ† Ш§Щ„ШўЩ† ШіЩ†Щ‚Щ€Щ… ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш© %s.\n"
+"\n"
+"Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Щ„Щ„Щ…ШЄШ§ШЁШ№Ш©."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
-msgstr ""
-" ШЄШ­ШЇЩЉШ«Ш§ШЄ 2002 MandrakeSoft Щ…Щ† Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Щ€Ш¶Ш№ Yaboot"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш© (cable)"
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
-" Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2001 MandrakeSoft Щ…Щ† ШЇЩ€ШЁЩ€Щ† ШіЩЉШЁШ§ШіШЄЩЉШ§Щ† <dupont_s"
-"\\@epita.fr>"
+"ШЄШ№Ш°Ш±ШЄ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ LiLo!\n"
+"ШґШєЩ‘Щ„ \"lilo\" ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ€ ШЈЩѓЩ…Щ„ ШЄШ«ШЁЩЉШЄ ШіЩ…Ш§ШЄ LiLo."
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Generic 3 Button Mouse"
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "Select another media to restore from"
+msgstr "Ш§Ш®ШЄШ± Щ€ШіЩЉШ· ШўШ®Ш± Щ„Щ„Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ†Щ‡"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Щ…ШЇЩЉШ± Ш§Щ„ШЁШ±Ш§Щ…Ш¬"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -13665,17 +13218,19 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 "restore description:\n"
@@ -13703,5009 +13258,5520 @@ msgstr ""
 "\n"
 "\n"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
-msgstr ""
-"\n"
-" ШЁШ№Ш¶ ШЈШ®Ш·Ш§ШЎ sendmail ЩЉЩѓЩ€Щ† ШіШЁШЁЩ‡Ш§ \n"
-" ШЄЩ‡ЩЉШ¦Ш© ШіЩЉШ¦Ш© Щ…Щ† postfix. Щ„Ш­Щ„ Щ‡Ш°Ш§ Ш§Щ„Щ…ШґЩѓЩ„Ш© Ш№Щ„ЩЉЩѓ\n"
-" ШЄШ№ЩЉЩЉЩ† myhostname ШЈЩ€ mydomain ЩЃЩЉ Щ…Щ„ЩЃ /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
+msgstr "ШҐШ№Ш§ШЇШ© ШЄШіЩ„ЩЉЩ…"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
+msgstr "Ш§Щ„Щ‚Ш±Шµ ЩЃЩЉ Ш§Щ„Щ…ЩѓШ§Щ† Ш§Щ„ШµШ­ЩЉШ­ - ШЄШ§ШЁШ№"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr "Drakbackup"
+msgid "KB"
+msgstr "ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restore"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ©"
+msgid "Network & Internet"
+msgstr "Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup Now"
-msgstr "Щ‚Щ… ШЁШ§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш§Щ„ШўЩ†"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© \"ШµЩ€ШЄЩЉ\" QWERTY"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Advanced Configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ Щ…ШЄЩ‚ШЇЩ…"
+msgid "Net Boot Images"
+msgstr "ШµЩ€Ш± Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Wizard Configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Sharing of local scanners"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "View Backup Configuration."
-msgstr "Ш§Ш№Ш±Ш¶ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "ШЄШ№Ш°Ш± Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ€Ш¬Щ€ШЇ Plug 'n Play. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШµШ­ЩЉШ­Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup Now from configuration file"
-msgstr "Щ‚Щ… ШЁШ§Щ„Щ†ШіШ® Ш§Щ„ШўЩ† Щ…Щ† Щ…Щ„ЩЃ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
+msgid "Services and deamons"
+msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Щ€ Ш§Щ„Щ…Ш±Ш§Щ‚ШЁШ§ШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Drakbackup Configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Drakbackup"
+msgid "Remote host name missing!"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЁШ№ЩЉШЇ Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
-msgstr "Ш§Ш¬Щ…Ш§Щ„ЩЉ Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid "with /usr"
+msgstr "Щ…Ш№ /usr"
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sending files..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ..."
+msgid "Network"
+msgstr "Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
-msgstr "Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚ FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr "ШЄШ­Щ‚Щ‘Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЄШ№Щ…Щ„ Ш№Щ„Щ‰ Microsoft Windows"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup other files"
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ ШЈШ®Ш±Щ‰"
+msgid "This password is too simple"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ‡Ш°Щ‡ ШЁШіЩЉШ·Ш© Ш¬ШЇШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup user files"
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Slovakian (QWERTZ)"
+msgstr "Ш§Щ„ШіЩ„Щ€ЩЃШ§ЩѓЩЉШ© (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "Backup system files"
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
-msgstr "ШЄШ­ШЄ Ш§Щ„ШЄШ·Щ€ЩЉШ± ... Ш§Щ†ШЄШёШ± ЩЃШ¶Щ„Ш§"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "ШЄШ«ШЁЩЉШЄ Щ…ШµШєЩ‘Ш± ЩЃШ№Щ„Ш§Щ‹ (Ш®ШµЩ€ШµШ§Щ‹ ШЁШЇЩ€Щ† urpmi)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"  Transfer  \n"
+"Now"
 msgstr ""
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Щ…Щ„ЩЃ ШЄЩ‡ЩЉШ¦Ш© \n"
-"ЩЃШ¶Щ„Ш§ Ш§Ш¶ШєШ· Щ…Ш№Ш§Щ„Ш¬ Щ„ШЈЩ€ Щ…ШЄЩ‚ШЇЩ…."
+"  Ш§Щ†Щ‚Щ„  \n"
+"Ш§Щ„ШўЩ†"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please select data to backup..."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Щ†ШіШ®Щ‡Ш§ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§..."
+msgid "Use daemon"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш±Ш§Щ‚ШЁ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Please select media for backup..."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ€ШіЩЉШ· Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ..."
+msgid "Authentication"
+msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please select data to restore..."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЄШ§Ш±ЩЉШ® Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©..."
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "ШЈШ¶ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "ЩЉШ¬ШЁ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄШ§Щ„ЩЉШ©:\n"
+msgid "Additional CUPS servers: "
+msgstr "Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШҐШ¶Ш§ЩЃЩЉШ©: "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
-"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃ Ш№ЩЉШ± FTP.\n"
-" ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШµШ­ЩЉШ­ Ш§Ш№ШЇШ§ШЇШ§ШЄ FTP."
+"Ш§Ш®ШЄШ± Щ€Ш§Ш­ШЇШ© Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈЩ€ ШЈШЇШ®Щ„ Ш§ШіЩ… "
+"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш±Щ‚Щ… IP Щ€ Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШҐШ®ШЄЩЉШ§Ш±ЩЉ (Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ 9100) ЩЃЩЉ Ш­Щ‚Щ€Щ„ "
+"Ш§Щ„ШҐШЇШ®Ш§Щ„."
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount %s?"
+msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ %sШџ"
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "Restore Via Network"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„ШґШЁЩѓШ©"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "Ш§Щ„Ш¬ШІШ§Ш¦Ш±"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Ш­Ш¬Щ… Initrd"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
-"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ.\n"
-" Щ„Щ… ЩЉШЄЩ… Ш§Ш±ШіШ§Щ„ ШЄЩ‚Ш±ЩЉШ± Ш§Щ„ШЁШ±ЩЉШЇ.\n"
-" ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ sendmail"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Ш®Ш§ШЇЩ…Ш§ШЄ Щ…Ш®ШЄЩ„ЩЃШ© Щ„Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ, Щ…Ш№ ШЈЩ€\n"
+"ШЇЩ€Щ† ШЄШіШ±ЩЉШ№ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Ш°ЩЉ\n"
+"ЩЉЩ†Ш§ШіШЁ Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄЩѓ."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Next"
-msgstr "Ш§Щ„ШЄШ§Щ„ЩЉ"
+msgid "\tBackups use tar and gzip\n"
+msgstr "\tالنسخ الإحتياطية تستخدم tar و gzip\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Previous"
-msgstr "Ш§Щ„ШіШ§ШЁЩ‚"
+msgid "2 MB"
+msgstr "2 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Save"
-msgstr "Ш­ЩЃШё"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Build Backup"
-msgstr "Ш§ШЁЩ†ЩЉ Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
+msgid "Setting Default Printer..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Restore Progress"
-msgstr "ШЄЩ‚ШЇЩ… Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
+msgid "Interface %s (using module %s)"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© %s (ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ€Ш­ШЇШ© %s)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Restore From Catalog"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє"
+msgid "Name: %s\n"
+msgstr "Ш§Щ„ШҐШіЩ…: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Browse to new restore repository."
-msgstr "Ш§ШіШЄШ№Ш±Ш¶ Ш§Щ„Щ‰ Щ…ШіШЄЩ€ШЇШ№ Ш§ШіШЄШ№Ш§ШЇШ© Ш¬ШЇЩЉШЇ."
+msgid "Generating preview ..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ…Ш№Ш§ЩЉЩ†Ш© ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "CD in place - continue."
-msgstr "Ш§Щ„Щ‚Ш±Шµ ЩЃЩЉ Ш§Щ„Щ…ЩѓШ§Щ† Ш§Щ„ШµШ­ЩЉШ­ - ШЄШ§ШЁШ№"
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Custom Restore"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Ш®ШµШµШ©"
+msgid "serial"
+msgstr "serial"
 
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Restore all backups"
-msgstr "Ш§ШіШЄШ№ШЇ ЩѓЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Failed..."
-msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Ш§Щ„Ш¬Щ€Ш±Ш¬ЩЉШ©Щ‘ (Ш§Щ„ШЄШµЩ…ЩЉЩ… Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Files Restored..."
-msgstr "Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ№Ш§ШЇШ©..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Path or Module required"
-msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШіШ§Ш± ШЈЩ€ Щ€Ш­ШЇШ©"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Ш№Ш·Ш§ШЎ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Щ„Щ„Щ€Ш­ШЇШ© %s.\n"
+"Щ„Ш§Ш­Шё ШЈЩ† ШЈЩЉ Ш№Щ†Щ€Ш§Щ† ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„Щ‡ Щ…ШіШЁЩ€Щ‚Ш§Щ‹ ШЁЩЂ 0x Щ…Ш«Щ„ '0x123'"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Hostname required"
-msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Username required"
-msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Kenya"
+msgstr "ЩѓЩЉЩ†ЩЉШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Password required"
-msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
+msgid "Use ``Unmount'' first"
+msgstr "Ш§ШіШЄШ®ШЇЩ… ``Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„'' ШЈЩ€Щ„Ш§"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Host Path or Module"
-msgstr "Щ€Ш­ШЇШ© ШЈЩ€ Щ…ШіШ§Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
+msgid "Installing mtools packages..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ«ШЁЩЉШЄ Ш­ШІЩ… mtools"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Host Name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
+msgid "You must specify a root partition"
+msgstr "ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЄШ­ШЇЩЉШЇ ШЄЩ‚ШіЩЉЩ… Ш¬Ш°Ш±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr "Ш§ШіШЄШ№ШЇ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШґШЁЩѓШ©: %s"
+msgid "first step creation"
+msgstr "Ш§Щ†ШґШ§ШЎ Ш§Щ„Ш®Ш·Щ€Ш© Ш§Щ„ШЈЩ€Щ„Щ‰"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Via Network"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Both Shift keys simultaneously"
+msgstr "Щ…ЩЃШЄШ§Ш­ЩЉЩ‘ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr "Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШґШ±ЩЉШ· Щ„ЩЉШіШЄ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШµШ­ЩЉШ­Ш©. Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШґШ±ЩЉШ· Щ‡ЩЉ %s."
+msgid "Select a scanner model"
+msgstr "Ш§Ш®ШЄШ± Ш·Ш±Ш§ШІ Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
-"ШЈШЇШ®Щ„ Ш§Щ„ШґШ±ЩЉШ· ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© %s\n"
-" ЩЃЩЉ Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШ±ЩЉШ· %s"
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR New Generation"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore From Tape"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„ШґШ±ЩЉШ·"
+msgid "Drakbackup Configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Drakbackup"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr "Ш№Щ„Ш§Щ…Ш© Ш§Щ„Щ‚Ш±Шµ Щ„ЩЉШіШЄ Ш§Щ„Ш№Щ„Ш§Щ…Ш© Ш§Щ„ШµШ­ЩЉШ­Ш©. Ш№Щ„Ш§Щ…Ш© Ш§Щ„Щ‚Ш±Шµ Щ‡ЩЉ %s."
+msgid "Save as.."
+msgstr "Ш­ЩЃШё ШЁШҐШіЩ….."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
-"ШЈШЇШ®Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© %s\n"
-" ЩЃЩЉ ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЄШ­ШЄ Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ /mnt/cdrom"
+"Щ„Щ… ЩЉШЄЩ… ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© ШЁШ№ШЇ.\n"
+"Щ‚Щ… ШЁШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ЩЃЩЉ Ш§Щ„Щ†Ш§ЩЃШ°Ш© Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore From CD"
-msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
+msgid "Korea (North)"
+msgstr "ЩѓЩ€Ш±ЩЉШ§ Ш§Щ„ШґЩ…Ш§Щ„ЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup files not found at %s."
-msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ %s"
+msgid "Autologin"
+msgstr "ШЇШ®Щ€Щ„ ШўЩ„ЩЉ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"ШєЩЉЩ‘Ш±\n"
-"Щ…ШіШ§Ш± Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
+msgid "System configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Domain Admin Password"
+msgstr "ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ„Щ…ШЇЩЉШ± Ш§Щ„Щ†Ш·Ш§Щ‚"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
 msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
 msgstr ""
-"Ш§ШіШЄШ№ШЇ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ\n"
-"Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
+"ЩЉЩ€ЩЃШ± Mandrake Linux 9.1 11 Щ€Ш§Ш¬Щ‡Ш© Ш§ШіШЄШ®ШЇШ§Щ… ЩЉЩ…ЩѓЩ† ШЄШ№ШЇЩЉЩ„Щ‡Ш§ ЩѓШ§Щ…Щ„Ш©Щ‹: ЩѓЩЉШЇЩЉ 3, Ш¬Щ†Щ€Щ… 2, "
+"WindowsMaker, ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Configuring printer ..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш© ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
-"Ш§ШіШЄШ№ШЇ Щ…ШЇШ®Щ„\n"
-"Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+"Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ ШЁШ№ШЇ Ш§Ш№Ш§ШЇШ© ШЄШ­Ш¬ЩЉЩ… Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ, \n"
+"ШіЩЉШЄЩ… Ш§Щ„ШЇЩ‚ЩЉЩ‚ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ†ШЇ Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ‚Ш§ШЇЩ… Щ„ЩЂ Windows(TM)"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr "Ш§Ш­Ш°ЩЃ ШЈШЇЩ„Ш© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Щ‚ШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
+msgid "MB"
+msgstr "Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr "Щ‚Щ… ШЁЩ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ Ш¬ШЇЩЉШЇ ЩЃШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© (ЩЃЩ‚Ш· Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ…ШЄШЇШ±Ш¬Ш©)"
+msgid "if set to yes, run some checks against the rpm database."
+msgstr "if set to yes, run some checks against the rpm database."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Ш§Ш®ШЄШ± Щ…ШіШ§Ш± Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© (ШЁШЇЩ„Ш§Щ‹ Щ…Щ† / )"
+msgid "Virgin Islands (British)"
+msgstr "Ш§Щ„Ш¬ШІШ± Ш§Щ„Ш№Ш°Ш±Ш§ШЎ (ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ§)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Other"
-msgstr "Ш§ШіШЄШ№ШЇ ШўШ®Ш±"
+msgid "Bermuda"
+msgstr "ШЁШ±Щ…Щ€ШЇШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Restore Users"
-msgstr "ШЈШ№ШЇ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† "
+msgid "click here if you are sure."
+msgstr "Ш§Ш¶ШєШ· Щ‡Щ†Ш§ ШҐШ°Ш§ ЩѓЩ†ШЄ Щ…ШЄШЈЩѓШЇШ§."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore system"
-msgstr "Ш§ШіШЄШ№ШЇ Ш§Щ„Щ†Щ‘ШёШ§Щ…"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Щ…Щ„ЩЃ ШЄЩ‡ЩЉШ¦Ш© \n"
+"ЩЃШ¶Щ„Ш§ Ш§Ш¶ШєШ· Щ…Ш№Ш§Щ„Ш¬ Щ„ШЈЩ€ Щ…ШЄЩ‚ШЇЩ…."
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"ЩЃЩЉ Ш§Щ„ШЈШ№Щ„Щ‰ ШіШЄШ¬ШЇ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Щ„ЩЉЩ†ЩѓШі Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ€ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§ Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ "
+"Ш§Щ„Ш®Ш§Шµ ШЁЩѓ.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄЩЏШЁЩ‚ЩЉ ШҐШ®ШЄЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬, Щ€ Щ‡ЩЉ Ш¬ЩЉШЇШ© Щ„ШЈШєЩ„ШЁ ШЈЩ†Щ€Ш§Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
+"ШҐШ°Ш§ Щ‚Щ…ШЄ ШЁШ№Щ…Щ„ ШЈЩЉ ШЄШєЩЉЩЉШ±Ш§ШЄ ЩЃЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЈЩ† ШЄШ№Ш±ЩЃ Ш§Щ„ШЄЩ‚ШіЩЉЩ… Ш§Щ„Ш¬Ш°Ш± (\"/\"). Щ„Ш§ ШЄШ®ШЄШ±\n"
+"ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш¶ШєЩЉШ±Ш© Ш¬ШЇШ§ Щ€ ШҐЩ„Ш§ Щ„Щ† ШЄШіШЄШ·ЩЉШ№ ШЄШ«ШЁЩЉШЄ ШЁШ±Ш§Щ…Ш¬ ЩѓШ§ЩЃЩЉШ©. ШҐШ°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШ®ШІЩЉЩ† "
+"Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ\n"
+"Ш№Щ„Щ‰ ШЄЩ‚ШіЩЉЩ… Щ…ШіШЄЩ‚Щ„ ЩЃШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш№Щ…Щ„ ШЄЩ‚ШіЩЉЩ… Щ„ЩЂ\"/home\"\n"
+"(Щ…Щ…ЩѓЩ† ЩЃЩ‚Ш· ШҐШ°Ш§ ЩѓШ§Щ† Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† ШЄЩ‚ШіЩЉЩ… Щ„Щ„ЩЉЩ†ЩѓШі).\n"
+"\n"
+"ЩѓЩ„ ШЄЩ‚ШіЩЉЩ… Щ…ЩЏШ№Ш·Щ‰ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Ш§Щ„ШҐШіЩ…\", \"Ш§Щ„ШіШ№Ш©\".\n"
+"\n"
+"\"Ш§Щ„ШҐШіЩ…\" Щ…Ш±ЩѓШЁ ШЁШ§Щ„ШіЩѓЩ„ Ш§Щ„ШЄШ§Щ„ЩЉ: \"Щ†Щ€Ш№ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\", \"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\",\n"
+"\"Ш±Щ‚Щ… Ш§Щ„ШЄЩ‚ШіЩЉЩ…\" (Щ…Ш«Щ„Ш§, \"hda1\").\n"
+"\n"
+"\"Ш±Щ‚Щ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ\" ШЇШ§Ш¦Щ…Ш§ Щ‡Щ€ Ш­Ш±ЩЃ ШЁШ№ШЇ \"hd\" ШЈЩ€ \"sd\". ШЁШ§Щ„Щ†ШіШЁШ© Щ„Щ„ШЈЩ‚Ш±Ш§Шµ "
+"Ш§Щ„ШµЩ„ШЁШ©\n"
+"Щ…Щ† Щ†Щ€Ш№ IDE ЩЃШҐЩ†:\n"
+" * \"a\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
+"\n"
+" * \"b\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„ШЈШіШ§ШіЩЉ\",\n"
+"\n"
+" * \"c\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„ШЈШіШ§ШіЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
+"\n"
+" * \"d\" ШЄШ№Щ†ЩЉ \"Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Ш№Щ„Щ‰ Щ…ШЄШ­ЩѓЩ… IDE Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ\",\n"
+"\n"
+"ШЈЩ…Ш§ ШЁШ§Щ„Щ†ШіШЁШ© Щ„ШЈЩ‚Ш±Ш§Шµ ШіЩѓШІЩЉ SCSI ЩЃШ§Щ„Ш­Ш±ЩЃ \"a\" ЩЉШ№Щ†ЩЉ \"ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Щ€ Ш§Щ„Ш­Ш±ЩЃ \"b"
+"\"\n"
+"ЩЉШ№Щ†ЩЉ \"Ш«Ш§Щ†ЩЉ ШЈЩ‚Щ„ Щ…Ш№Ш±ЩЃ SCSI\", Ш§Щ„Ш®."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Other Media"
-msgstr "Щ€ШіЩЉШ· ШўШ®Ш±"
+msgid "Remove"
+msgstr "Ш§Ш­Ш°ЩЃ"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select another media to restore from"
-msgstr "Ш§Ш®ШЄШ± Щ€ШіЩЉШ· ШўШ®Ш± Щ„Щ„Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ†Щ‡"
+msgid "Lesotho"
+msgstr "Щ„ЩЉШіЩ€ШЄЩ€"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉЩ‡ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
+msgid "utopia 25"
+msgstr "utopia 25"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Restore from Hard Disk."
-msgstr "Ш§ШіШЄШ№ШЇ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
+msgid "Pipe job into a command"
+msgstr "Ш­Щ€Щ‘Щ„ Ш§Щ„Щ€ШёЩЉЩЃШ© Ш§Щ„Щ‰ Ш§Щ„ШЈЩ…Ш±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Use quota for backup files."
-msgstr "Ш§ШіШЄШ®ШЇЩ… quota Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "Ш§Ші Щ…Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„ШЇЩЉЩ†Ш§Щ…ЩЉЩѓЩЉ Ш§Щ„Ш¬ШЇЩЉШЇ Ш§Щ„Ш°ЩЉ ЩЉШЄЩ… ШЄЩ€Щ„ЩЉШЇЩ‡ Щ…Щ† devfs"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Ш­Ш¬Щ… Ш§Щ„ШЈЩ‚ШµЩ‰\n"
-" Ш§Щ„Щ…ШіЩ…Щ€Ш­ ШЁЩ‡ Щ„ЩЂDrakbackup"
+msgid "Yes"
+msgstr "Щ†Ш№Щ…"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory to save:"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… Ш­ЩЃШёЩ‡:"
+msgid "Cote d'Ivoire"
+msgstr "ЩѓЩ€ШЄ ШЇЩЉЩЃЩ€Ш§Ш±"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "Which protocol do you want to use?"
+msgstr "Щ…Ш§ Щ‡Щ€ Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Шџ"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "please choose the date to restore"
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЄШ§Ш±ЩЉШ® Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
+msgid "Restore Progress"
+msgstr "ШЄЩ‚ШЇЩ… Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup the system files before:"
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ… Щ‚ШЁЩ„:"
+msgid "Estonia"
+msgstr "Ш§ШіШЄЩ€Щ†ЩЉШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
-msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„Ш°ЩЉЩ† ШіЩЉШЄЩ… Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Щ…"
+msgid "Choose the host on which the local scanners should be made available:"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄШЄЩ€ЩЃШ± Щ„Щ‡ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©:"
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
-msgstr "Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Щ„Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ„ЩЃШ§ШЄ Ш§Ш®Ш±Щ‰"
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© ЩЃЩЉ Ш¬ШЇЩ€Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ШЇЩЉЩѓ Щ„ЩѓЩ†ЩЉ Щ„Ш§ ШЈШіШЄШ·ЩЉШ№ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§.\n"
+"Ш§Щ„Ш­Щ„ Ш§Щ„Щ€Ш­ЩЉШЇ Щ‡Щ€ ШЈЩ† ШЄЩ†Щ‚Щ„ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЈШіШ§ШіЩЉШ© Щ„ШЄШ­ШµЩ„ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш­Ш© ШЁЩЉЩ† Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ "
+"Ш§Щ„Щ…Щ…ШЄШЇШ©."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "         Restore Configuration       "
-msgstr "          ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ©       "
+msgid "Channel"
+msgstr "Ш§Щ„Щ‚Щ†Ш§Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr "          ШЄЩ…ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© ШЁЩ†Ш¬Ш§Ш­ Ш№Щ„Щ‰ %s       "
+msgid "Add"
+msgstr "Ш§Ш¶Ш§ЩЃШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr "          ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШЄЩ…          "
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш№ШЇШ§ШЇ ШЈЩЉ Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ЩЃШ§ШіШЇШ©"
+msgid " Error while sending mail. \n"
+msgstr " Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ. \n"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± ШЈЩ€ Ш§Ш­Ш°ЩЃЩ‡Ш§ ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§Щ„Щ‚Ш§ШЇЩ…Ш©."
+msgid "Keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
-"Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ЩЃШ§ШіШЇШ©:\n"
-"\n"
+"ШЈШЇШ®Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЁШ§Щ„Ш№Щ„Ш§Щ…Ш© %s\n"
+" ЩЃЩЉ ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЄШ­ШЄ Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ /mnt/cdrom"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
-"Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… Ш§ШіШЄШ±Ш¬Ш§Ш№Щ‡Ш§:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr "Щ„Ш§ ШЄЩ‡ЩЉШ¦Ш©, Ш§Ш¶ШєШ· Щ…Ш№Ш§Щ„Ш¬ ШЈЩ€ Щ…ШЄЩ‚ШЇЩ….\n"
+msgid "Choose the connection you want to configure"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ€ШµЩ„Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ webdav.\n"
+msgid "Please wait, setting security level..."
+msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†.."
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ rsync.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 Щ‡ЩЉ Ш§Щ„ШЁЩЉШ¦Ш© Ш§Щ„ШЈЩ…Ш«Щ„ Щ„ШЄШ·Щ€ЩЉШ± Ш§Щ„ШЁШ±Ш§Щ…Ш¬"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ SSH.\n"
+msgid "Configuring network device %s"
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШЁЩѓШ© %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
-msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ FTP.\n"
+msgid "activated"
+msgstr "Щ…Щ†ШґЩ‘Ш·"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "\t-Tape \n"
-msgstr "\t-Ш§Щ„ШґШ±ЩЉШ· \n"
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "Ш§Ш®ШЄШ± Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„Ш®Ш§ШЇЩ… DHCP."
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr "\t-Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬.\n"
+msgid "Finding packages to upgrade..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШіШЄШЄЩ… ШЄШ±Щ‚ЩЉШЄЩ‡Ш§..."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr "\t-Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ.\n"
+msgid "Mount point: "
+msgstr "Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
-"\n"
-"- Daemon (%s) include :\n"
+msgid "parse all fonts"
+msgstr "ШЄШ­Щ„ЩЉЩ„ ЩѓЩ„ Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr "\tالنسخ الإحتياطية تستخدم tar و gzip\n"
+msgid "With X"
+msgstr "Щ…Ш№ X"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr "\tالنسخ الإحتياطية تستخدم tar و bzip2\n"
+msgid "Multi-head configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш±Ш¤Щ€Ші"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr "\tЩ„Ш§ ШЄЩЏШ¶Щ…Щ† Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…\n"
+msgid "No browser available! Please install one"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШЄШµЩЃШ­ Щ…ШЄЩ€ЩЃШ±! ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШ«ШЁЩЉШЄ Щ…ШЄШµЩЃШ­"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Options:\n"
+"%s"
 msgstr ""
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­ЩЃШё Ш§Щ„ШЄШєЩЉЩЉШ±Ш§ШЄШџ\n"
+"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ‡Щ€:\n"
 "\n"
-"- Ш®ЩЉШ§Ш±Ш§ШЄ:\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
-"\t\t Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…: %s\n"
-"\t\t Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш±: %s\n"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… ReiserFS Щ„Щ„ШЄШ¬ШІШ¦Ш§ШЄ ШЈШµШєШ± Щ…Щ† 32 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
-"\n"
-"- Ш§Ш­ЩЃШё Ш№ШЁШ± %s Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ: %s\n"
+"ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ rwho ЩЉШіЩ…Ш­ Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„ШЁШ№ЩЉШЇЩЉЩ† ШЁШ§Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†\n"
+"Ш§Щ„Ш°ЩЉЩ† ШіШ¬Щ„Щ€Ш§ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш¬Щ‡Ш§ШІ ЩЉШґШєЩ‘Щ„ Щ…Ш±Ш§Щ‚ШЁ rwho (Щ…Щ…Ш§Ш«Щ„ Щ„ЩЂ finger)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr "\t\tErase=%s"
+msgid "Domain name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
-"\n"
-"- Ш§Ш­ЩЃШё Ш§Щ„Щ‰ Ш§Щ„ШґШ±ЩЉШ· Ш№Щ„Щ‰ Ш§Щ„Ш¬Щ‡Ш§ШІ: %s"
+msgid "Sharing of local printers"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid " (multi-session)"
-msgstr " (Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш¬Щ„ШіШ§ШЄ)"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on device: %s"
-msgstr " Ш№Щ„Щ‰ Ш§Щ„Ш¬Щ‡Ш§ШІ: %s"
+msgid "Available printers"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "RW"
-msgstr "RW"
+msgid "Empty"
+msgstr "ЩЃШ§Ш±Шє"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Burn to CD"
-msgstr ""
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
 "\n"
-"- Ш§Щ†ШіШ® Ш§Щ„Щ‰ Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
 "\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
 "\n"
-"- Ш§Ш­Ш°ЩЃ ЩѓЩ„ Щ…Щ„ЩЃШ§ШЄ tar Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ ШЁШ№ШЇ ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ®.\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
 "\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
 "\n"
-"- Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш±:%s\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+"Monitor\n"
 "\n"
-"- Other Files:\n"
-msgstr ""
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
 "\n"
-"-Ш§Щ„Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰:\n"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
 "\n"
-"- User Files:\n"
-msgstr ""
 "\n"
-"-Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…:\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text width"
+msgstr "Ш№Ш±Ш¶ Ш§Щ„Щ†Шµ"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Where do you want to mount device %s?"
+msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„Ш¬Щ‡Ш§ШІ %sШџ"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The default lease (in seconds)"
+msgstr "Ш§Щ„ШҐЩЉШ¬Ш§Ш± Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Interface \"%s\""
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©  \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "Щ…Ш№ Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ© Ш§Щ„ШЈШіШ§ШіЩЉШ© (Щ…ЩЃШ¶Щ‘Щ„)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "ШІШ± Щ€Ш§Ш­ШЇ"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 "\n"
-"-Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„Щ†Щ‘ШёШ§Щ…  :\n"
+"ШЄЩ€Ш¬ШЇ %d Ш·Ш§ШЁШ№Ш§ШЄ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃШ© Щ…ШЄШµЩ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁЩ†ШёШ§Щ…Щѓ"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Ш§Ш®ШЄШЁШ§Ш±"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
 msgstr ""
+"Arguments: (arg)\n"
 "\n"
-"Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ШіШ§Ш№ШЇ :\n"
+"Allow/Forbid direct root login."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select user manually"
-msgstr "Ш§Ш®ШЄШ±Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЉШЇЩ€ЩЉЩ‘Щ‹Ш§"
+msgid "Korea"
+msgstr "ЩѓЩ€Ш±ЩЉШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Backup Users"
-msgstr "Щ…ШіШЄШ®ШЇЩ…Щ€ Ш§Щ„Щ…ШіШ§Ш№ШЇ"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Your choice? (default `%s'%s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup system"
-msgstr "Щ†ШёШ§Щ… Ш§Щ„Щ…ШіШ§Ш№ШЇ"
+msgid "Raw printer"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ…"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ…Ш§ ШЄШ±ЩЉШЇ Щ†ШіШ®Щ‡ Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§Щ‹"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "Ш§Щ„ШҐШіЩ… Ш§Щ„Ш±ШіЩ…ЩЉ Щ„Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "on Tape Device"
-msgstr "Ш№Щ„Щ‰ Ш§Щ„ШґШ±ЩЉШ·"
+msgid "Vendor"
+msgstr "Ш§Щ„Щ…ШµЩ†Ш№"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "on CDROM"
-msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
+msgid "Interface %s"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©  %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "across Network"
-msgstr "Ш№ШЁШ± Ш§Щ„ШґЩ‘ШЁЩѓШ©"
+msgid "Configure mouse"
+msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "on Hard Drive"
-msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ‘Щ„ШЁ"
+msgid "Choose the mount points"
+msgstr "Ш§Ш®ШЄШ± Щ†Щ‚Ш§Ш· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Please choose where you want to backup"
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ШЈЩЉЩ† ШЄШ±ЩЉШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„Ш§Ш­ШЄЩЉШ§Ш·ЩЉ."
+msgid "OK"
+msgstr "Щ…Щ€Ш§ЩЃЩ‚"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "More Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ ШЈЩѓШ«Ш±"
+msgid "Yugoslavian (latin)"
+msgstr "Ш§Щ„ЩЉЩ€ШєЩ€ШіЩ„Ш§ЩЃЩЉШ© (Щ„Ш§ШЄЩЉЩ†ЩЉ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "When"
-msgstr "Щ…ШЄЩ‰ "
+msgid "Installing"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Where"
-msgstr "ШЈЩЉЩ†"
+msgid "Launch userdrake"
+msgstr "ШґШєЩ‘Щ„ userdrake"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "What"
-msgstr "Щ…Ш§Ш°Ш§ "
+msgid "Is this an install or an upgrade?"
+msgstr "Щ‡Щ„ Щ‡Ш°Ш§ ШЄШ«ШЁЩЉШЄ ШЈЩ… ШЄШ±Щ‚ЩЉШ©Шџ"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr "Ш§Щ„Шє Щ…Щ„ЩЃШ§ШЄ tar Ш§Щ„Ш®Щ„ШµШ© ШЁШ§Щ„Щ‚Ш±Шµ ШЄШ§ШµЩ„ШЁ ШЁШ№ШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„Щ‰ Щ€ШіЩЉШ· ШўШ®Ш±."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "ISDN card"
+msgstr "ШЁШ·Ш§Щ‚Ш© ISDN ШЇШ§Ш®Щ„ЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Send mail report after each backup to:"
-msgstr "ШЈШ±ШіЩ„ ШЄЩ‚Ш±ЩЉШ±Ш§Щ‹ ШЁШ±ЩЉШЇЩЉШ§Щ‹ ШЁШ№ШЇ ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ® Ш§Щ„Щ‰:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
+msgstr ""
+"Щ„Щ…ШґШ§Ш±ЩѓШЄЩ†Ш§ ШЁЩ…Ш№Ш±ЩЃШЄЩѓ Щ€ Щ„Щ„Щ…ШіШ§Ш№ШЇШ© ЩЃЩЉ ШЁЩ†Ш§ШЎ ШЈШЇЩ€Ш§ШЄ Щ„ЩЉЩ†ЩѓШі, Ш§Щ†Ш¶Щ… Ш§Щ„Щ‰  Щ…Щ†ШЄШЇЩЉШ§ШЄ Ш§Щ„Щ†Щ‚Ш§Шґ "
+"Ш§Щ„ШЄЩЉ ШіШЄШ¬ШЇЩ‡Ш§ ЩЃЩЉ ШµЩЃШ­Ш© \"Community\" Ш№Щ„Щ‰ Щ…Щ€Щ‚Ш№Щ†Ш§"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
-"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† Щ…Ш±Ш§Щ‚ШЁ cron Щ…Щ€Ш¬Щ€ШЇ Ш¶Щ…Щ† Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…. \n"
+"ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§, Ш§Щ†ШЄЩ‡ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ© Щ€ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"ШіЩЉШЄЩ… ШЄШ·ШЁЩЉЩ‚ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ Ш§Щ„ШўЩ†.\n"
 "\n"
-"Щ„Ш§Ш­Шё ШЈЩ† ЩѓЩ„ Щ€ШіШ§Ш¦Ш· Ш§Щ„ШґШЁЩѓШ© ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ."
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "\t-Hard drive.\n"
+msgstr "\t-Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ.\n"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Please choose the\n"
-"media for backup."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
-"Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ±\n"
-"Щ€ШіЩЉШ· Ш§Щ„Щ†ШіШ® Ш§Щ„Ш§Ш­ШЄЩЉШ§Ш·ЩЉ"
+"ЩЉШЄЩ… ШЄЩ†ШґЩЉШ· Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш·Щ€Ш© ЩЃЩ‚Ш· Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЄШ¬ШІШ¦Ш© Щ„ЩЉЩ†ЩѓШі Щ‚ШЇЩЉЩ…Ш©\n"
+"Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ.\n"
+"\n"
+"ЩЉШ­ШЄШ§Ш¬ DrakX Ш§?Щ† Ш§Щ„Щ‰ ШЈЩ† ЩЉШ№Щ„Щ… Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† Ш§Щ„ШµЩЃШ± ШЈЩ€\n"
+"ШЄШ±ЩЉШЇ ШЄШ±Щ‚ЩЉШ© Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Щ„ШЇЩЉЩѓ Щ…ШіШЁЩ‚Ш§Щ‹:\n"
+"\n"
+" * \"ШЄШ«ШЁЩЉШЄ\": ЩЃЩЉ Ш§?ШєЩ„ШЁ ШЄЩ‚Щ€Щ… ШЁШ§ШІШ§Щ„Ш© Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Щ‚ШЇЩЉЩ…\n"
+"ЩѓЩ„ЩЉШ§Щ‹. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШєЩЉЩЉШ± ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ, ШЈЩ€ ШЄШ±ЩЉШЇ\n"
+"ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ, Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±. Ш№Щ…Щ€Щ…Ш§Щ‹ Ш§Ш№ШЄЩ…Ш§ШЇШ§\n"
+"Ш№Щ„Щ‰ ЩѓЩЉЩЃЩЉШ© ШЄШ¬ШІШ¦Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„ШЇЩЉЩѓ. ЩЉЩ…ЩѓЩ†Щѓ Щ…Щ†Ш№ Ш§ШІШ§Щ„Ш© ШЁШ№Ш¶\n"
+"ШЁЩЉШ§Щ†Ш§ШЄЩѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+" * \"ШЄШ±Щ‚ЩЉШ©\": ЩЃШ¦Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄШ­ШЇЩЉШ« Ш§Щ„Ш­ШІЩ…\n"
+"Ш№Щ„Щ‰ Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Щ„Щ† ЩЉШЄЩ… ШЄШєЩЉЩЉШ±\n"
+"ШЁЩЉШ§Щ†Ш§ШЄЩѓ ШЈЩ€ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ. ШЈШєЩ„ШЁ Ш®Ш·Щ€Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§?Ш®Ш±Щ‰\n"
+"Щ„Ш§ ШЄШІШ§Щ„ Щ…Щ€Ш¬Щ€ШЇШ©, Щ…Ш«Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш§Ш№ШЄЩЉШ§ШЇЩЉ.\n"
+"\n"
+"Ш§ШіШЄШ®ШЇШ§Щ… Ш®ЩЉШ§Ш± ``Ш§Щ„ШЄШ±Щ‚ЩЉШ©'' ЩЉШ¬ШЁ ШЈЩ† ЩЉШ№Щ…Щ„ ШЁШґЩѓЩ„ Ш¬ЩЉШЇ Ш№Щ„Щ‰\n"
+"Ш§ШµШЇШ§Ш±Ш§ШЄ Mandrake Linux \"8.1\" ШЈЩ€ Щ…Ш§ ЩЃЩ€Щ‚. ? ЩЉЩ†ШµШ­ ШЁШ§Щ„ШЄШ±Щ‚ЩЉШ©\n"
+"Щ…Щ† Ш§ШµШ§ШЇШ±Ш§ШЄ Mandrake Linux Щ‚ШЁЩ„ \"8.1\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… CUPS ШЁШ№ЩЉШЇ"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr ""
-"ЩЃШ¶Щ„Ш§ Ш§Ш®ШЄШ± Ш§Щ„ЩЃШЄШ±Ш© \n"
-"Щ…Ш§ ШЁЩЉЩ† ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ® Ш§Ш­ШЄЩЉШ§Ш·ЩЉ"
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr "ШЄШ№Ш°Ш± Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Щ…Щ† Star Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Use daemon"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш±Ш§Щ‚ШЁ"
+msgid "delete"
+msgstr "Ш­Ш°ЩЃ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "monthly"
-msgstr "ШґЩ‡Ш±ЩЉШ§"
+msgid "here if no."
+msgstr "ШҐШ¶ШєШ· Щ‡Щ†Ш§ ШҐШ°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "weekly"
-msgstr "ШЈШіШЁЩ€Ш№ЩЉЩ‘Ш§"
+msgid "DHCP host name"
+msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ DHCP"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "daily"
-msgstr "ЩЉЩ€Щ…ЩЉЩ‘Ш§Щ‹"
+msgid "The maximum lease (in seconds)"
+msgstr "Ш§Щ„ШҐЩЉШ¬Ш§Ш± Ш§Щ„ШЈЩ‚ШµЩ‰ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "hourly"
-msgstr "ЩѓЩ„Щ‘ ШіШ§Ш№Ш© "
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†ЩЃШ° Ш§Щ„ШЄШіЩ„ШіЩ„ЩЉ Ш§Щ„Щ…Щ€ШµЩ„Ш© ШЁЩ‡ Ш§Щ„ЩЃШЈШ±Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "HardDrive / NFS"
-msgstr "HardDrive / NFS"
+msgid "Did it work properly?"
+msgstr "Щ‡Щ„ Ш№Щ…Щ„ШЄ ШЁШ§Щ„ШґЩѓЩ„ Ш§Щ„ШµШ­ЩЉШ­Шџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Poor"
+msgstr "ЩЃЩ‚ЩЉШ±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please enter the directory to save to:"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… Ш§Щ„Ш­ЩЃШё ЩЃЩЉЩ‡:"
+msgid "The DHCP start range"
+msgstr "Ш­ШЇЩ€ШЇ DHCP start"
 
-# c-format
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Ш®Ш±Ш§Ш¬ Ш§Щ„ШґШ±ЩЉШ· ШЁШ№ШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
+msgid "Grenada"
+msgstr "Ш№Ш±ЩЉЩ†Ш§ШЇШ§"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Щ…ШіШ­ Ш§Щ„ШґШ±ЩЉШ· Щ‚ШЁЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
+msgid "Unsafe"
+msgstr "ШєЩЉШ± ШўЩ…Щ†"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please check if you want to use the non-rewinding device."
+msgid ", %s sectors"
+msgstr ", %s Щ‚Ш·Ш§Ш№"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Щ„Ш§"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
-"ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш¬Щ‡Ш§ШІ ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„Щ„Ш±Ш¬Щ€Ш№ Ш§Щ„Щ‰ Ш§Щ„Ш®Щ„ЩЃ."
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш·Ш§ШЁШ№ШЄЩѓ Ш¬Щ‡Ш§ШІШ§Щ‹ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Щ…Щ† HP ШЈЩ€ Sony (OfficeJet, PSC, LaserJet "
+"1100/1200/1220/3200/3300 Щ…Ш№ Щ…Ш§ШіШ­ Ш¶Щ€Ш¦ЩЉ, Sony IPJ-V100) ШЈЩ€ Ш¬Щ‡Ш§ШІ HP PhotoSmart "
+"ШЈЩ€ HP LaserJet 2200?"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "Guadeloupe"
+msgstr "ШєЩ€Ш§ШЇЩЉЩ„Щ€ШЁ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Use tape to backup"
-msgstr "Ш§ШіШЄШ®Щ… Ш§Щ„ШґШ±ЩЉШ· Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "could not find any font.\n"
+msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† ШҐЩЉШ¬Ш§ШЇ ШЈЩЉ Ш®Ш·.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "No CD device defined!"
-msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ№Ш±ЩЉЩЃ Ш¬Щ‡Ш§ШІ Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬!"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЈЩ† ЩЉЩ‚Щ€Щ… ШІШ± BackSpace ШЁШ№Щ…Щ„ Щ€ШёЩЉЩЃШ© ШІШ± Delete ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±Шџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш¬Щ‡Ш§ШІ Щ†ШіШ® Ш§Щ„ШЈЩ‚Ш±Ш§Шµ\n"
-" Щ…Ш«Ш§Щ„: 0,1,0"
+msgid "Vertical refresh rate"
+msgstr "Щ†ШіШЁШ© Ш§Щ„ШҐЩ†Ш№Ш§Шґ Ш§Щ„Ш±ШЈШіЩЉ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
 #, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Ш¬Щ‡Ш§ШІ DVDRAM"
+msgid "Entering step `%s'\n"
+msgstr "Entering step `%s'\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Ш¬Щ‡Ш§ШІ DVDR"
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " Erase Now "
-msgstr " Ш§Щ…Ш­Щђ Ш§Щ„ШўЩ† "
+msgid "Removing %s ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш­Ш°ЩЃ %s ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr ""
-"ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Щ…ШіШ­ Ш§Щ„Щ€ШіЩЉШ· Ш§Щ„Щ‚Ш§ШЁЩ„ Щ„ШҐШ№Ш§ШЇШ© Ш§Щ„ЩѓШЄШ§ШЁШ© (Ш§Щ„Ш¬Щ„ШіШ© "
-"Ш§Щ„ШЈЩ€Щ„Щ‰)"
+msgid "Niger"
+msgstr "Ш§Щ„Щ†ЩЉШ¬Ш±"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Щ€ШіЩЉШ· CDRW"
+msgid "No printer"
+msgstr "Щ„Ш§ Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Please check for multisession CD"
-msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш¬Щ„ШіШ§ШЄ"
+msgid "alert configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЄЩ†ШЁЩЉЩ‡"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…ШіШ§Ш­Ш© Щ€ШіЩЉШ· CD/DVD (ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ)"
+msgid "NetWare Printer Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© NetWare"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш¬Щ‡Ш§ШІ CD/DVD Ш§Щ„Ш®Ш§Шµ ШЁЩѓ\n"
-"(Ш§Ш¶ШєШ· Ш§ШЇШ®Ш§Щ„ Щ„Щ†ШґШ± Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ Щ„Ш­Щ‚Щ€Щ„ ШЈШ®Ш±Щ‰.\n"
-"Щ‡Ш°Ш§ Ш§Щ„Ш­Щ‚Щ„ Щ„ЩЉШі Ш¶Ш±Щ€Ш±ЩЉШ§Щ‹, Ш§Щ†Щ‡ Щ…Ш¬Ш±ШЇ ШЈШЇШ§Ш© Щ„Щ…Щ„ШЎ Ш§Щ„ШҐШіШЄЩ…Ш§Ш±Ш©.)"
+msgid "%s BootSplash (%s) preview"
+msgstr "%s BootSplash (%s) Щ…Ш№Ш§ЩЉЩ†Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr "Ш§ШіШЄШ®ШЇЩ… CD/DVDROM Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "General"
+msgstr "Ш№Ш§Щ…"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ€ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ€ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±!"
+msgid "Printing system: "
+msgstr "Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©: "
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Remember this password"
-msgstr "ШЄШ°ЩѓЩ‘Ш± ЩѓЩ„Щ…Ш© Ш§Щ„ШіШ± Щ‡Ш°Щ‡"
+msgid "Add a user"
+msgstr "ШЈШ¶ЩЃ Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please enter your password"
-msgstr "Ш±Ш¬Ш§ШЎ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±"
+msgid "Network configuration (%d adapters)"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ© (%d Щ…Щ€Ш§Ш¦Щ…Ш§ШЄ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Please enter your login"
-msgstr "Ш±Ш¬Ш§ШЎ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„"
+msgid "Mandatory package %s is missing"
+msgstr "Ш§Щ„Ш­ШІЩ…Ш© Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉШ© %s Щ…ЩЃЩ‚Щ€ШЇШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„ШЇЩ„ЩЉЩ„ (ШЈЩ€ Ш§Щ„Щ€Ш­ШЇШ©) Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… ЩЃЩЉЩ‡Ш§ Щ€Ш¶Ш№\n"
-" Ш§Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
+msgid "Philippines"
+msgstr "Ш§Щ„ЩЃЩЉЩ„ЩЉШЁЩЉЩ†"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
 #, c-format
-msgid "Please enter the host name or IP."
-msgstr "ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP."
+msgid "Ok"
+msgstr "Щ…Щ€Ш§ЩЃЩ‚"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
-"Щ…ЩЃШ§ШЄЩЉШ­ ШЈШ®Ш±Щ‰\n"
-"(ШєЩЉШ± drakbackup) Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹"
+msgid "Print Queue Name"
+msgstr "Ш§ШіЩ… ШµЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… abootШџ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Ш§Щ„ШЁЩЉЩ„Ш§Ш±Щ€ШіЩЉШ©"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"  Transfer  \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
-"  Ш§Щ†Щ‚Щ„  \n"
-"Ш§Щ„ШўЩ†"
+"PDQ ЩЉШЇШ№Щ… ЩЃЩ‚Ш· Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ€ Ш·Ш§ШЁШ№Ш§ШЄ LPD Ш§Щ„ШЁШ№ЩЉШЇШ© Щ€ Ш·Ш§ШЁШ№Ш§ШЄ Socket/TCP.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Ш¬ШЇЩЉШЇШ©"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
-"Ш§Щ†ШґШ¦/Щ„Щ†Щ‚Щ„\n"
-"Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ„ЩЂSSH"
+"ШЈШЇШ®Щ„ Щ‡Щ†Ш§ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш·Ш§ШЁШ№Ш§ШЄЩ‡Ш§. ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш№Щ…Щ„ Ш°Щ„Щѓ ЩЃЩ‚Ш· Ш§Щ† Щ„Щ… "
+"ШЄЩ‚Щ… Ш§Щ„Ш®Ш§ШЇЩ…Ш§ШЄ ШЁЩ†ШґШ± Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Expect for SSH"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Expect Щ„ЩЂSSH"
+msgid "Restore From Catalog"
+msgstr "Ш§ШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Net Method:"
-msgstr "Net Method:"
+msgid "Pitcairn"
+msgstr "ШЁЩЉШЄЩѓШ§ЩЉШ±Щ†"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use network connection to backup"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШґШЁЩѓШ© Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Users"
-msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Щ€Щ†"
+msgid "group :"
+msgstr "Щ…Ш¬Щ…Щ€Ш№Ш© :"
 
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "ЩЃШґЩ„ ШЄШ­Щ…ЩЉЩ„ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s ЩЃЩЉ Ш§Щ„ШЇЩ„ЩЉЩ„ %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШЄШ±Ш§ЩѓЩ…ЩЉ (Щ„Ш§ ШЄШіШЄШЁШЇЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ‚ШЇЩЉЩ…Ш©)"
+msgid "Lilo screen"
+msgstr "ШґШ§ШґШ© Lilo"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid "Remove Selected"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…Ш§ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
+msgid "LILO with graphical menu"
+msgstr "LILO Щ…Ш№ Щ‚Ш§Ш¦Щ…Ш© Ш±ШіЩ€Щ…ЩЉШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr "Щ„Ш§ ШЄШіШЄШ®ШЇЩ… Ш°Ш§ЩѓШ±Ш© Ш§Щ„Щ…ШЄШµЩЃШ­ Ш§Щ„Щ…Ш®ШЁШ¦ЩЉШ©"
+msgid "Estimating"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш­ШіШ§ШЁ Ш§Щ„ШЄЩ‚Ш±ЩЉШЁЩЉ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± ЩѓЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Ш§Щ„Ш°ЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ¶Щ…ЩЉЩ†Щ‡Щ… ЩЃЩЉ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ."
+msgid "You can't unselect this package. It is already installed"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…. Ш§Щ†Щ‡Ш§ Щ…Ш«ШЁШЄШ© Щ…ШіШЁЩ‚Ш§Щ‹"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
-"ШЁЩ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш± ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ±Ш¬Ш§Ш№ ШЈЩЉ Щ†ШіШ®Ш© Щ…Щ†\n"
-" ШЇЩ„ЩЉЩ„ /etc Ш§Щ„Ш®Ш§Шµ ШЁЩѓ."
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… SMB/Windows \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Щ„Ш§ ШЄЩЏШ¶Щ…Щ‘Щ† Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Щ‡Щ…Ш© (passws, group,fstab)"
+msgid "Go on anyway?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШЄШ±Ш§ЩѓЩ…ЩЉ (Щ„Ш§ ШЄШіШЄШЁШЇЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ‚ШЇЩЉЩ…Ш©)"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ€ Ш§Ш№ШЇШ§Ш© ШЁЩ†Ш§ШЎ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ rpm..."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…: (ШЇЩ„ЩЉЩ„ /etc)"
+msgid "Does not appear to be recordable media!"
+msgstr "Щ„Ш§ ЩЉШЁШЇЩ€ Щ€ШіЩЉШ· Щ‚Ш§ШЁЩ„ Щ„Щ„ЩѓШЄШ§ШЁШ©!"
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ ЩЉЩ…ЩѓЩ†Щ‡Ш§ Щ†ШіШ® Щ€ Ш§ШіШЄШ±Ш¬Ш§Ш№ ЩѓЩ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ ЩЃЩЉ ШЇЩ„ЩЉЩ„ /etc.\n"
+msgid "Specify options"
+msgstr "Ш­ШЇШЇ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Vanuatu"
+msgstr "ЩЃШ§Щ†Ш§ШЄЩ€"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "ЩЉШ¬ШЁ Ш§Ш№Ш·Ш§ШЎ Ш§ШіЩ… Ш§Щ„Ш®Ш§ШЇЩ… ШЈЩ€ Ш±Щ‚Щ… IP Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш®Ш§ШЇЩ…!"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
-"\n"
-"ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Ш№Щ„Щ‰ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ­ШЄШ§Ш¬Щ‡Ш§.\n"
+"Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ ЩЉЩ€ЩЃШ± Ш·Ш±ЩЉЩ‚Ш© Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЇЩ€Щ†\n"
+"Ш§Щ„ШҐШ№ШЄЩ…Ш§ШЇ Ш№Щ„Щ‰ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш§Щ„ШҐШ№ШЄЩЉШ§ШЇЩЉ. Щ‡Ш°Ш§ Щ…ЩЃЩЉШЇ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ\n"
+"SILO Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШЈЩ€ Ш§Ш°Ш§ ШЈШІШ§Щ„ Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± LILO, ШЈЩ€ Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ€Ш§ЩЃЩ‚ SILO\n"
+"Щ…Ш№ ШЄЩ‡ЩЉШ¦Ш© Щ†ШёШ§Щ…Щѓ. ЩЉЩ…ЩѓЩ† ЩѓШ°Щ„Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ…Ш®ШµШµ Щ…Ш№\n"
+"Mandrake rescue image, Щ…Щ…Ш§ ЩЉШ¬Ш№Щ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬Ш© Щ…Щ† Ш§Щ†Щ‡ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Ш®Ш·ЩЉШ±Ш© ШЈЩѓШ«Ш± "
+"ШіЩ‡Щ€Щ„Ш©.\n"
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ‚Щ„Ш§Ш№ Щ„Щ†ШёШ§Щ…Щѓ, ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©\n"
+"Ш§Щ„ШЈЩ€Щ„Щ‰ Щ€ Ш§Ш¶ШєШ· \"Щ…Щ€Ш§ЩЃЩ‚\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ„ЩЃШ§ШЄ ШЈЩ€ Ш§Щ„ШЈШЇЩ„Ш© Ш«Щ… Ш§Щ†Щ‚Ш± 'ШЈШ¶ЩЃ'"
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ Щ…Ш±Щ…Щ‘ШІ Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File Selection"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ…Щ„ЩЃШ§ШЄ"
+msgid "Norfolk Island"
+msgstr "Ш¬ШІЩЉШ±Ш© Щ†Щ€Ш±ЩЃЩ€Щ„Щѓ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Can't create catalog!"
-msgstr "ШЄШ№Ш°Ш± Ш§Щ†ШґШ§ШЎ Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє!"
+msgid "Theme installation failed!"
+msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШіЩ…Ш§ШЄ"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid " Error while sending mail. \n"
-msgstr " Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ. \n"
+msgid "Nothing to do"
+msgstr "Щ„Ш§ ШґЩЉШ¦ Щ„Щ„Ш№Щ…Щ„"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
-"\n"
-"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚ ШґШ±ЩЉШ· Ш§Щ„ШЄШ®ШІЩЉЩ†:\n"
-"\n"
+msgid "Use for loopback"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Щ„ЩЂloopback"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
-"\n"
-"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚  Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
+msgstr "ШЈШЇШ§Ш© ШЄЩ‚Ш±ЩЉШ± Ш§Щ„Ш№ЩЉЩ€ШЁ ЩЃЩЉ Mandrake"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
-"\n"
-"Щ†ШґШ§Ш·Ш§ШЄ Drakbackup Ш№Щ† Ш·Ш±ЩЉЩ‚ %s:\n"
-"\n"
+msgid "use pppoe"
+msgstr "Ш§ШіШЄШ®ШЇЩ… pppoe"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving files to the new partition"
+msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬ШЇЩЉШЇШ©"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s Щ…Ш№ ШЇШ№Щ… ШЄШ¬Ш±ЩЉШЁЩЉ Щ„Щ„Ш±ШіЩ€Щ… Ш«Щ„Ш§Ш«ЩЉШ© Ш§Щ„ШЈШЁШ№Ш§ШЇ"
+
+#: ../../help.pm:1 ../../interactive.pm:1
+#, c-format
+msgid "Advanced"
+msgstr "Щ…ШЄЩ‚ШЇЩ…"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Ш§Щ†Щ‚Щ„"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (ШіЩ€ЩЉШЇЩЉШ©)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
-"\n"
-" Щ…ШґЩѓЩ„Ш© ЩЃЩЉ Щ€ШµЩ„Ш© FTP: Щ„Щ… ЩЉЩѓЩ† ШЁШ§Щ„ШҐЩ…ЩѓШ§Щ† Ш§Ш±ШіШ§Щ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ "
-"ШЁШ§ШіШЄШ®ШЇШ§Щ… FTP.\n"
+msgid "More Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ ШЈЩѓШ«Ш±"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "ШЈЩЃШєШ§Щ†ШіШЄШ§Щ†"
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "Delete Hard Drive tar files after backup to other media."
+msgstr "Ш§Щ„Шє Щ…Щ„ЩЃШ§ШЄ tar Ш§Щ„Ш®Щ„ШµШ© ШЁШ§Щ„Щ‚Ш±Шµ ШЄШ§ШµЩ„ШЁ ШЁШ№ШЇ Ш§Щ„Щ†ШіШ® Ш§Щ„Щ‰ Щ€ШіЩЉШ· ШўШ®Ш±."
+
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"file list sent by FTP: %s\n"
-" "
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
-"Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Ш±ШіЩ„Ш© Щ…Щ† FTP: %s\n"
-" "
+"cron Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ UNIX Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш­ШЇШЇШ© Щ…Щ† Щ‚ШЁЩ„ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…\n"
+"Ш№Щ†ШЇ ШЈШЇЩ€Щ‚Ш§ШЄ Щ…Ш­ШЇШЇШ© ШЇЩ€Ш±ЩЉШ§Щ‹. vixie cron ЩЉШ¶ЩЉЩЃ Ш№ШЇШЇШ§Щ‹ Щ…Щ† Ш§Щ„Щ…ШІШ§ЩЉШ§ Ш§Щ„Щ‰ UNIX\n"
+"cron Ш§Щ„ШЈШіШ§ШіЩЉ, ШЁЩ…Ш§ ЩЃЩЉЩ‡Ш§ Ш­Щ…Ш§ЩЉШ© ШЈЩ…Щ†ЩЉШ© ШЈЩЃШ¶Щ„, Щ€ Ш®ЩЉШ§Ш±Ш§ШЄ ШЄЩ‡ЩЉШ¦Ш© ШЈЩ‚Щ€Щ‰."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No changes to backup!"
-msgstr "Щ„Ш§ ШЄШєЩЉЩЉШ±Ш§Щ† Щ„Щ„Щ†ШіШ®Ш© Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©!"
+msgid "Burundi"
+msgstr "ШЁЩ€Ш±Щ€Щ†ШЇЩЉ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ„Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ..."
+msgid "Add Client -->"
+msgstr "Ш§Ш¶Ш§ЩЃШ© Ш№Щ…ЩЉЩ„ -->"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Backup Other files..."
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ ШЈШ®Ш±Щ‰..."
+msgid "Read carefully!"
+msgstr "Ш§Щ‚Ш±ШЈ Ш¬ЩЉШЇШ§!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Ш§Щ„ШЄЩ‚ШЇЩ… ЩЃЩЉ Щ†ШіШ® Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ..."
+msgid "RW"
+msgstr "RW"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup User files..."
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†..."
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹,\n"
+"Ш§Ш·ШЁШ№ tv norm Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ€ ШЁЩ„ШЇЩѓ"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Backup system files..."
-msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…..."
+msgid "Port"
+msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "No tape in %s!"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ ШґШ±ЩЉШ· ЩЃЩЉ %s!"
+msgid "No (experts only)"
+msgstr "Щ„Ш§ (Щ„Щ„Ш®ШЁШ±Ш§ШЎ ЩЃЩ‚Ш·)"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
-msgstr "ШЄЩ€Ш¬ШЇ Щ…ШґЩѓЩ„Ш© ЩЃЩЉ Ш§Щ„ШЄШµШ±ЩЉШ­ Щ„Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬."
+msgid "No kernel selected!"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Щ†Щ€Ш§Ш©!"
 
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr "Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ…ШіШ­ Ш§Щ„Щ€ШіЩЉШ· ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ."
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Not erasable media!"
-msgstr "Щ€ШіЩЉШ· ШєЩЉШ± Щ‚Ш§ШЁЩ„ Щ„Щ„Щ…ШіШ­!"
+msgid "Set-GID"
+msgstr "Set-GID"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Does not appear to be recordable media!"
-msgstr "Щ„Ш§ ЩЉШЁШЇЩ€ Щ€ШіЩЉШ· Щ‚Ш§ШЁЩ„ Щ„Щ„ЩѓШЄШ§ШЁШ©!"
+msgid "The encryption keys do not match"
+msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄШґЩЃЩЉШ± ШєЩЉШ± Щ…ШЄШ·Ш§ШЁЩ‚Ш©"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ‚Ш±Шµ CD-R/DVD-R ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
+msgid "Right \"Windows\" key"
+msgstr "Щ…ЩЃШЄШ§Ш­ \"Windows\" Ш§Щ„ШЈЩЉЩ…Щ†"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "WebDAV transfer failed!"
-msgstr "ЩЃШґЩ„ШЄ Ш№Щ…Щ„ЩЉШ© Щ†Щ‚Щ„ WebDAV!"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr "Щ…Щ€Щ‚Ш№ WebDAV Ш§Щ„ШЁШ№ЩЉШЇ Щ…ШЄШІШ§Щ…Щ† Щ…ШіШЁЩ‚Ш§Щ‹!"
+msgid "if set to yes, check empty password in /etc/shadow."
+msgstr "if set to yes, check empty password in /etc/shadow."
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr "Ш§Ш¬Щ…Ш§Щ„ЩЉ Ш§Щ„ШЄЩ‚ШЇЩ…"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgstr ""
+"Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©, Ш№Щ„ЩЉЩѓ Щ‚Ш±Ш§ШЎШ© ШЁЩ†Щ€ШЇ Ш§Щ„ШЄШ±Ш®ЩЉШµ Ш¬ЩЉШЇШ§Щ‹. Ш§Щ†Щ‡Ш§\n"
+"ШЄШєШ·ЩЉ ЩѓЩ„ ШЄЩ€ШІЩЉШ№Ш© Mandrake Linux. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩ€Ш§ЩЃЩ‚ Ш№Щ„Щ‰ ЩѓЩ„ Ш§Щ„ШЁЩ†Щ€ШЇ\n"
+"Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉЩ‡Ш§, Щ‚Щ… ШЁШ§Щ„ШЄШЈШґШЁШ± Ш№Щ„Щ‰ ШµЩ†ШЇЩ€Щ‚ \"Ш§Щ‚ШЁЩ„\". Ш§Щ† Щ„Щ… ШЄЩ‚ШЁЩ„, Щ‚Щ… ШЁШҐШєЩ„Ш§Щ‚\n"
+"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
-"without being prompted for a password."
 msgstr ""
-"ШЄЩ… Ш§Щ„Щ†Щ‚Щ„ ШЁЩ†Ш¬Ш§Ш­\n"
-"Ш±ШЁЩ…Ш§ ШЄШ±ЩЉШЇ Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§Ш°Ш§ ЩѓШ§Щ† ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… ШЁШ§Щ„ШЈЩ…Ш±:\n"
+"Щ‡Ш°Щ‡ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©:\n"
 "\n"
-"ssh -i %s %s\\@%s\n"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
+msgid ""
+"drakfirewall configurator\n"
 "\n"
-"ШЇЩ€Щ† ШЄЩ†ШЁЩЉЩ‡Щѓ Ш§Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
+msgstr ""
+"ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© drakfirewall\n"
+"\n"
+"Щ‡Ш°Щ‡ Ш§Щ„ШЈШЇШ§Ш© ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄЩ‡ЩЉШ¦Ш© Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ ШґШ®ШµЩЉ Щ„Щ†ШёШ§Щ… Mandrake Linux Щ‡Ш°Ш§.\n"
+"ШҐШ°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш¬ШЇШ§Ш±Ш§ Щ†Ш§Ш±ЩЉШ§ Щ…ШЄШ®ШµШµШ§, Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰\n"
+"ШЄЩ€ШІЩЉШ№Ш© MandrakeSecurity Firewall."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "%s not responding"
-msgstr "%s Щ„Ш§ ЩЉШіШЄШ¬ЩЉШЁ"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ€ Ш§Щ„Щ†Ш·Ш§Щ‚ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ„Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
+"Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Can't find %s on %s"
-msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ %s Ш№Щ„Щ‰ %s"
+msgid "Remove selected host"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш®ШЄШ§Ш±"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr "ШЄЩ… Ш±ЩЃШ¶ Щ„Ш§ШЄШµШ±ЩЉШ­ ШЁЩ†Щ‚Щ„ %s Ш§Щ„Щ‰ %s"
+msgid "Network configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bad password on %s"
-msgstr "ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± ШіЩЉШ¦Ш© Ш№Щ„Щ‰ %s"
+msgid "No sharing"
+msgstr "Щ„Ш§ Щ…ШґШ§Ш±ЩѓШ©"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "No password prompt on %s at port %s"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Ш·Щ„ШЁ ЩѓЩ„Щ…Ш© ШіШ± ЩЃЩЉ %s Ш№Щ„Щ‰ Ш§Щ„Щ…Щ†ЩЃШ° %s"
+msgid "Move selected rule down one level"
+msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Щ„Щ‰ ШЄШ­ШЄ ШЁЩ…ШіШЄЩ€Щ‰ Щ€Ш§Ш­ШЇ"
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
-msgstr "ERROR: Cannot spawn %s."
+msgid "TB"
+msgstr "ШЄЩЉШ±Ш§ШЁШ§ЩЉШЄ"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "This may take a moment to generate the keys."
-msgstr "Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Щ„ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­."
+msgid "Please check if you are using a DVDR device"
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Ш¬Щ‡Ш§ШІ DVDR"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
-msgstr ""
-"%s Щ…Щ€Ш¬Щ€ШЇ, Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃЩ‡Шџ\n"
-"\n"
-"ШЄШ­Ш°ЩЉШ±: Ш§Ш°Ш§ Щ‚Щ…ШЄ ШЁЩ‡Ш°Щ‡ Ш§Щ„Ш№Щ…Щ„ЩЉШ© Щ…ШіШЁЩ‚Ш§Щ‹ ШєШ§Щ„ШЁШ§Щ‹\n"
-" ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ®Щ„ Щ…Щ† authorized_keys Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ…."
+msgid "FATAL"
+msgstr "FATAL"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
 "\n"
-"                    DrakBackup Report Details\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
 "\n"
 msgstr ""
+"ШіЩЉШіЩ…Ш­ Ш®Ш§ШЇЩ… DHCP Щ„Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ ШЁШ§Щ„ШҐЩ‚Щ„Ш§Ш№ ШЁШ§ШіШЄШ®ШЇШ§Щ… PXE ЩЃЩЉ Ш­ШЇЩ€ШЇ Ш§Щ„Ш№Щ†Ш§Щ€ЩЉЩ† "
+"Ш§Щ„Щ…Ш№Ш·Ш§Ш©.\n"
 "\n"
-"                    ШЄЩЃШ§ШµЩЉЩ„ ШЄЩ‚Ш±ЩЉШ± DrakBackup\n"
-"\n"
+"Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© %s ЩЉШіШЄШ®ШЇЩ… netmask %s.\n"
 "\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "ШҐЩ„ШєШ§ШЎ"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
 msgstr ""
+"Arguments: (arg)\n"
 "\n"
-"                      ШЄЩ‚Ш±ЩЉШ± Щ…Ш±Ш§Щ‚ШЁ DrakBackup\n"
-"\n"
-"\n"
+"Allow/Forbid reboot by the console user."
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
 msgstr ""
-"\n"
-"                      ШЄЩ‚Ш±ЩЉШ± DrakBackup \n"
-"\n"
+"ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш¬Ш№Щ„ Ш¬Щ‡Ш§ШІЩѓ ЩЉШЁШЇШЈ X ШЁШґЩѓЩ„ ШўЩ„ЩЉ ШЁШ№ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№.\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ X ШЈЩ† ШЁЩЉШЇШЈ ШЁШ№ШЇ ШҐШ№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш¬Щ‡Ш§ШІЩѓШџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "INFO"
-msgstr "INFO"
+msgid "Build the disk"
+msgstr "Ш¬Щ‡ШІ Ш§Щ„Щ‚Ш±Шµ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "FATAL"
-msgstr "FATAL"
+msgid "Disconnect %s"
+msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩЂ %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "WARNING"
-msgstr "WARNING"
+msgid "Status:"
+msgstr "Ш§Щ„Ш­Ш§Щ„Ш©:"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr "Cron ШєЩЉШ± Щ…ШЄЩ€ЩЃШ± Ш­ШЄЩ‰ Ш§Щ„ШўЩ† Щ„Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШєЩЉШ± Ш§Щ„Ш¬Ш°Ш±"
+msgid "HTTP proxy"
+msgstr "ШЁШ±Щ€ЩѓШіЩЉ HTTP"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ %s. ШёЩ‡Ш± Ш§Щ„Ш®Ш·ШЈ Ш§Щ„ШЄШ§Щ„ЩЉ:"
+msgid "SSH Server"
+msgstr "Ш®Ш§ШЇЩ… SSH"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Щ„Ш§, Щ„Ш§ ШЈШ±ЩЉШЇ ШЇШ®Щ€Щ„Ш§ ШЈЩ„ЩЉШ§"
+msgid "\t-Network by rsync.\n"
+msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ rsync.\n"
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Щ†Ш№Щ…, ШЈШ±ЩЉШЇ ШЇШ®Щ€Щ„Ш§ ШўЩ„ЩЉШ§ Щ…Ш№ Щ‡Ш°Ш§ )Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ШіШ·Ш­ Ш§Щ„Щ…ЩѓШЄШЁ("
+msgid "European protocol"
+msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШЈЩ€Ш±Щ€ШЁЩЉ"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "ШґШєЩ‘Щ„ X-Window Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш№Щ„Щ‰ Ш§Щ„Ш®Ш§ШЇЩ… \"%s\""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid "System mode"
-msgstr "Щ€Ш¶Ш№ Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Error"
+msgstr "Ш®Ш·ШЈ"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bootsplash"
-msgstr "Bootsplash!"
+msgid "allow \"su\""
+msgstr "Ш§ШіЩ…Ш­ ШЁЩЂ\"su\""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Lilo screen"
-msgstr "ШґШ§ШґШ© Lilo"
+msgid "Australia"
+msgstr "ШЈЩ€ШіШЄШ±Ш§Щ„ЩЉШ§"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
-"\n"
-"Ш§Ш®ШЄШ± ШіЩ…Ш©\n"
-"Lilo Щ€ bootsplash,\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Щ…\n"
-"ШЁШґЩѓЩ„ Щ…Щ†ЩЃШµЩ„"
+msgid "please wait during ttmkfdir..."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Щ†ШЄШёШ± ШЈШ«Щ†Ш§ШЎ Ш№Щ…Щ„ЩЉШ© ttmkfdir..."
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Themes"
-msgstr "Ш§Щ„ШіЩ…Ш§ШЄ"
+msgid "Configure only card \"%s\"%s"
+msgstr "Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШЁШ·Ш§Щ‚Ш© \"%s\"%s ЩЃЩ‚Ш·"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Splash selection"
-msgstr "Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШґШ§ШґШ§ШЄ"
+msgid "Level"
+msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ШЈЩ†ШЄ ШЄШіШЄШ®ШЇЩ… %s ЩѓЩ…ШЇЩЉШ± Ш§Щ‚Щ„Ш§Ш№ Ш­Ш§Щ„ЩЉШ§.\n"
-"Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Щ„ШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШҐШ№ШЇШ§ШЇ"
+msgid "Change the printing system"
+msgstr "ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Ш·ШЁШ§Ш№Ш©"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "ШЄЩ… ШЄШ«ШЁЩЉШЄ ШіЩ…Ш§ШЄ LiLo Щ€ Bootsplash ШЁЩ†Ш¬Ш§Ш­"
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
+msgstr ""
+"Щ†ШёШ§Щ…Щѓ ЩЉШЇШ№Щ… Ш§Щ„ШҐШ№ШЇШ§ШЇ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш±Ш¤Щ€Ші.\n"
+"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Theme installation failed!"
-msgstr "ЩЃШґЩ„ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШіЩ…Ш§ШЄ"
+msgid "Configure services"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Notice"
-msgstr "Щ…Щ„Ш§Ш­ШёШ©"
+msgid "Broadcast Address:"
+msgstr "Ш№Щ†Щ€Ш§Щ† Broadcast:"
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Relaunch 'lilo'"
-msgstr "ШЈШ№ШЇ ШЄШґШєЩЉЩ„ 'lilo'"
+msgid "mount failed: "
+msgstr "ЩЃШґЩ„ Ш§Щ„ШЄШ­Щ…ЩЉЩ„: "
 
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
-"ШЄШ№Ш°Ш±ШЄ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ LiLo!\n"
-"ШґШєЩ‘Щ„ \"lilo\" ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ€ ШЈЩѓЩ…Щ„ ШЄШ«ШЁЩЉШЄ ШіЩ…Ш§ШЄ LiLo."
+"Щ†Щ€Ш§Ш© ЩЉЩ†ЩѓШі ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄШґШєЩЉЩ„ Ш­Щ„Щ‚Ш© Ш­ШіШ§ШЁЩЉШ© (Calculation Loop) Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ„ШЄЩ†ШґЩЉШ· "
+"ШЈШЇШ§Ш© Ш№ШЇ Ш§Щ„Щ€Щ‚ШЄ. ЩЉШЄЩ… Ш­ЩЃШё Ш§Щ„Щ†ШЄЩЉШ¬Ш© ЩѓЩЂbogomips ЩѓШ·Ш±ЩЉЩ‚Ш© Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬."
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Ш§Ш¬Ш№Щ„ initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "ШµЩ€Ш±Ш©"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "ШЄШ№Ш°Ш± ШЄШґШєЩЉЩ„ mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr "ШЄШ№Ш°Ш±ШЄ Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\" Ш§Щ„Щ‰ Star Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Ш§ШЇШ§Ш±Ш© Ш№Щ† ШЁШ№ШЇ"
+
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
-"ШЄШ№Ш°Ш±ШЄ ЩѓШЄШ§ШЁШ© /etc/sysconfig/bootsplash\n"
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ…Щ„ЩЃ."
+"ШЇШ№Щ… PCMCIA ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ШЁШ№ШЇ Ш§Щ„ШўЩ† Щ„ШҐШµШЇШ§Ш± Ш§Щ„Щ†Щ€Ш§Ш© 2.2. ЩЃШ¶Щ„Ш§ Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШҐШµШЇШ§Ш± 2.4"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Write %s"
-msgstr "Ш§ЩѓШЄШЁ %s"
+msgid "Selected All"
+msgstr "ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ЩѓЩ„"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "ШЄШ№Ш°Ш±ШЄ ЩѓШЄШ§ШЁШ© /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Common Unix Printing System"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Lilo message not found"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш±ШіШ§Щ„Ш© Lilo"
+msgid "Webmin Service"
+msgstr "Ш®ШЇЩ…Ш§ШЄ Webmin"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr "Ш§Щ†ШіШ® %s Ш§Щ„Щ‰ %s"
+msgid "device"
+msgstr "Щ€Ш­ШЇШ©"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr "Ш§Щ†ШіШ® %s Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§Щ‹ Ш§Щ„Щ‰ %s.old"
+msgid "All"
+msgstr "Ш§Щ„ЩѓЩ„"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Create new theme"
-msgstr "Ш§Щ†ШґШ¦ ШіЩ…Ш© Ш¬ШЇЩЉШЇШ©"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ШЈЩЉ Щ†ШёШ§Щ… Ш·ШЁШ§Ш№Ш© ШЄШ±ЩЉШЇ ШЈЩ† ШЄШіШЄШ®ШЇЩ…Шџ"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Ш§Ш№Ш±Ш¶ Ш§Щ„ШіЩ…Ш§ШЄ\n"
-"ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
+msgid "Greece"
+msgstr "Ш§Щ„ЩЉЩ€Щ†Ш§Щ†"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Install themes"
-msgstr "Ш«ШЁШЄ Ш§Щ„ШіЩ…Ш§ШЄ"
+msgid "An error occurred"
+msgstr "ШёЩ‡Ш± Ш®Ш·ШЈ"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Щ€Ш¶Ш№ Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"ЩЉШ¬ШЁ ШЄШ±Щ‚ЩЉШ© Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©.\n"
+"Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ Щ„Ш§ ШЄШ±ЩЉШЇ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§Шџ"
 
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Щ€Ш¶Ш№ Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Ш§Щ„ШЄШ§Щ…ЩЉЩ„ (ШўЩ„Ш© ЩѓШ§ШЄШЁШ©)"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "ЩЉШЇЩ€ЩЉ"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Щ…Щ„ЩЃ/_Ш®Ш±Щ€Ш¬"
+msgid "Printer manufacturer, model, driver"
+msgstr "Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш·Ш§ШЁШ№Ш©, Ш§Щ„Ш·Ш±Ш§ШІ, Ш§Щ„Щ…ШґШєЩ‘Щ„"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "/_File"
-msgstr "/_Щ…Щ„ЩЃ"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ€ШіШ· ШЈЩ€ Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† Ш§Щ„Щ€ШіШ· Щ…Ш­Щ…ЩЉ Щ…Щ† Ш§Щ„Щ‚Ш±Ш§ШЎШ© Щ„Щ„Ш¬Щ‡Ш§ШІ  %s.\n"
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§ШЇШ®Щ„ Щ€ШіШ· ЩЃЩ‰ Ш§Щ„Щ€Ш­ШЇШ©."
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Ш§Ш№ШЇШ§ШЇ ШЈШіЩ„Щ€ШЁ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Ш§Щ„ШЇЩ„ЩЉЩ„ %s ЩЉШ­ШЄЩ€ЩЉ Щ…ШіШЁЩ‚Ш§ Ш№Щ„Щ‰ ШЁШ№Ш¶ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ\n"
+"(%s)"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "No browser available! Please install one"
-msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШЄШµЩЃШ­ Щ…ШЄЩ€ЩЃШ±! ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШ«ШЁЩЉШЄ Щ…ШЄШµЩЃШ­"
+msgid "Printer on NetWare server"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… NetWare"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩ…Ш№Ш§Щ„Ш¬ Bugzilla ..."
+msgid "Give the ram size in MB"
+msgstr "Ш§ЩѓШЄШЁ Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© ШЁШ§Щ„Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Package not installed"
-msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш©"
+msgid "Real name"
+msgstr "Ш§Щ„Ш§ШіЩ… Ш§Щ„Ш­Щ‚ЩЉЩ‚ЩЉ"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Not installed"
-msgstr "ШєЩЉШ± Щ…Ш«ШЁЩ‘ШЄ"
+msgid "done"
+msgstr "Ш§Щ†ШЄЩ‡Щ‰"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Standalone Tools"
-msgstr "Ш§Щ„ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…Щ†ЩЃШµЩ„Ш©"
+msgid "Please uncheck or remove it on next time."
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± ШЈЩ€ Ш§Ш­Ш°ЩЃЩ‡Ш§ ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§Щ„Щ‚Ш§ШЇЩ…Ш©."
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Report"
-msgstr "ШЄЩ‚Ш±ЩЉШ±"
+msgid "Higher"
+msgstr "Щ…Ш±ШЄЩЃШ№ ШЈЩѓШ«Ш±"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ¬Щ‡ЩЉШІЩ‡Ш§"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ЩЃЩЉШЇЩЉЩ€/Ш§Щ„ШЄЩ„ЩЃШ§ШІ "
+"Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш© ЩЃЩЉ Щ„ЩЉЩ†ЩѓШі Щ…Щ€ШµЩ€Щ„Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.\n"
 "\n"
 "\n"
-"Щ„ШЄШіЩ„ЩЉЩ… ШЄЩ‚Ш±ЩЉШ± Ш§Щ„Ш№ЩЉЩ€ШЁ, Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± ШЄЩ‚Ш±ЩЉШ±.\n"
-"ШіЩЉЩ‚Щ€Щ… Щ‡Ш°Ш§ ШЁЩ‚ШЄШ­ Щ…ШЄШµЩЃШ­ Щ€ЩЉШЁ Ш№Щ„Щ‰ Ш§Щ„ШµЩЃШ­Ш© https://drakbug.mandrakesoft.com\n"
-" Ш­ЩЉШ« ШіШЄШ¬ШЇ Ш§ШіШЄЩ…Ш§Ш±Ш© Ш№Щ„ЩЉЩѓ Щ…Щ„Ш¤Щ‡Ш§. Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓШ±Ш© ШЈШ№Щ„Ш§Щ‡ ШіЩЉШЄЩ… Щ†Щ‚Щ„Щ‡Ш§\n"
-"Ш§Щ„Щ‰ Ш°Щ„Щѓ Ш§Щ„Ш®Ш§ШЇЩ…\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШІЩЉШ§Ш±Ш© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ШЇШ№Щ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Ш§ Ш№Щ„Щ‰:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Release: "
-msgstr "Ш§Щ„ШҐШµШЇШ§Ш±:"
+msgid "Can't find %s on %s"
+msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ %s Ш№Щ„Щ‰ %s"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr "Ш§Щ„Щ†Щ€Ш§Ш©:"
+msgid "Japanese 106 keys"
+msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ†ЩЉШ© 106 Щ…ЩЃШ§ШЄЩЉШ­"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Package: "
-msgstr "Ш§Щ„Ш¬ШІЩ…Ш©: "
+msgid "This will take a few minutes."
+msgstr "ШіЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ¶Ш№ ШЇЩ‚Ш§Ш¦Щ‚."
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Application:"
-msgstr "Ш§Щ„ШЄШ·ШЁЩЉЩ‚:"
+msgid "Burkina Faso"
+msgstr "ШЁЩ€Ш±ЩѓЩЉЩ†Ш§ЩЃШ§ШіЩ€"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Configuration Wizards"
-msgstr "Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
+msgid "Use scanners on remote computers"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Ш­Щ€Ш§ЩЉШіШЁ Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Delete selected rule"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Windows Migration tool"
-msgstr "ШЈШЇШ§Ш© Ш§Щ„ШҐЩ†ШЄЩ‚Ш§Щ„ Щ…Щ† Windows"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш®Ш§ШЇЩ…Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Urpmi"
-msgstr "Urpmi"
+msgid "Insert a floppy in %s"
+msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† ЩЃЩЉ %s"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Software Manager"
-msgstr "Щ…ШЇЩЉШ± Ш§Щ„ШЁШ±Ш§Щ…Ш¬"
+msgid "Maldives"
+msgstr "Ш¬ШІШ± Ш§Щ„Щ…Ш§Щ„ШЇЩЉЩЃ"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Control"
-msgstr "Ш§Щ„ШЄШ­ЩѓЩ… Ш№Щ† ШЁШ№ШЇ"
+msgid "compact"
+msgstr "Щ…ШЇЩ…Ш¬"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "Msec"
-msgstr "Msec"
+msgid "1 minute"
+msgstr "ШЇЩ‚ЩЉЩ‚Ш© Щ€Ш§Ш­ШЇШ©"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "on channel %d id %d\n"
+msgstr "Ш№Щ„Щ‰ Ш§Щ„Щ‚Щ†Ш§Ш© %d id %d\n"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid ", multi-function device"
+msgstr ", Ш¬Щ‡Ш§ШІ Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "HardDrake"
-msgstr "HardDrake"
+msgid "Laos"
+msgstr "Щ„Ш§Щ€Ші"
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Synchronization tool"
-msgstr "DrakSync"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ ШЄШ¬ШІШ¦Ш© FAT Щ‚Ш§ШЁЩ„ Щ„ШЄШєЩЉЩЉШ± Ш­Ш¬Щ…Щ‡Ш§ (ШЈЩ€ Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ…ШЄШЁЩ‚ЩЉШ©)"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "First Time Wizard"
-msgstr "Щ…Ш№Ш§Щ„Ш¬ First Time"
+msgid "Up"
+msgstr "ЩЃЩ€Щ‚"
 
-#: ../../standalone/drakbug:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mandrake Control Center"
-msgstr "Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake"
+msgid "Firewall"
+msgstr "Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr "ШЈШЇШ§Ш© ШЄЩ‚Ш±ЩЉШ± Ш§Щ„Ш№ЩЉЩ€ШЁ ЩЃЩЉ Mandrake"
+msgid "Area:"
+msgstr "Ш§Щ„Щ…Щ†Ш·Щ‚Ш© :"
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Parameters"
-msgstr "Parameters"
+msgid "(E)IDE/ATA controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ (E)IDE/ATA"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Printer Server"
+msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP Ш§Щ„Ш№Щ…ЩЉЩ„"
+msgid "Disconnection from the Internet complete."
+msgstr "Ш§ЩѓШЄЩ…Щ„ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
+msgid "Custom configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Щ…Ш®ШµШµШ©"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШ®ШЁШ± Ш№Щ† Щ…ЩѓШ§Щ† ШµЩ€Ш±Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
+"\n"
+"Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Щ‡Щ†Ш§Щѓ ШЇЩ„ЩЉЩ„ Щ…Щ€Ш¬Щ€ШЇ, ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ†ШіШ® Щ…Ш­ШЄЩ€ЩЉШ§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЈЩ€ Щ‚Ш±Шµ DVD.\n"
+"\n"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connection type: "
-msgstr "Щ†Щ€Ш№ Ш§Щ„Ш№Щ„Ш§Щ‚Ш©"
+msgid "Saint Pierre and Miquelon"
+msgstr "ШіШ§Щ†ШЄ ШЁЩЉЩЉШ± Щ€ Щ…ЩЉЩѓЩЉЩ„Щ€Щ†"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Profile: "
-msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„:"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
+msgstr ""
+"\n"
+"Щ…ШґШ§ЩѓЩ„ Ш§ШіШЄШ№Ш§ШЇШ© Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©:\n"
+"\n"
+"ШЈШ«Щ†Ш§ШЎ Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ, ШіЩЉЩ‚Щ€Щ… Drakbackup ШЁШ§Щ„ШЄШЈЩѓШЇ Щ…Щ† ЩѓЩ„ Щ…Щ„ЩЃШ§ШЄ\n"
+"Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Щ‚ШЁЩ„ Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Ш§.\n"
+"Щ‚ШЁЩ„ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© ШіЩЉЩ‚Щ€Щ… drakbackup ШЁШ­Ш°ЩЃ \n"
+"Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„ШЈШµЩ„ЩЉ Щ€ ШіШЄШ®ШіШ± ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„ШЄЩЉ \n"
+"Ш№Щ„ЩЉЩ‡. Щ…Щ† Ш§Щ„Щ…Щ‡Щ… ШЈЩ† ШЄЩѓЩ€Щ† Ш­Ш°Ш±Ш§Щ‹ Щ€ Щ„Ш§ ШЄЩ‚Щ€Щ… ШЁШЄШ№ШЇЩЉЩ„ \n"
+"ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ЩЉШЇЩ€ЩЉШ§Щ‹.\n"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "saving Bootsplash theme..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш­ЩЃШё ШіЩ…Ш© Bootsplash..."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
-msgstr ""
-"Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ ШЈЩЉ Ш§ШЄШµШ§Щ„Ш§ШЄ ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"Щ‚Щ… ШЁШ№Щ…Щ„ Ш§ШЄШµШ§Щ„ ШЈЩ€Щ„Ш§ ШЁШ§ШіШЄШ®ШЇШ§Щ… 'ШЄЩ‡ЩЉШ¦Ш©'"
+msgid "Portugal"
+msgstr "Ш§Щ„ШЁШ±ШЄШєШ§Щ„"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
-msgstr ""
-"Щ„Щ… ЩЉШЄЩ… ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© ШЁШ№ШЇ.\n"
-"Щ‚Щ… ШЁШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ЩЃЩЉ Ш§Щ„Щ†Ш§ЩЃШ°Ш© Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ©"
+msgid "Do you have another one?"
+msgstr "Щ‡Щ„ Ш№Щ†ШЇЩѓ Щ€Ш§Ш­ШЇШ© ШЈШ®Ш±Щ‰Шџ"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "activate now"
-msgstr "Щ‚Щ… ШЁШ§Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШўЩ†"
+msgid ", printing to %s"
+msgstr ", Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШўЩ†"
+msgid "Assign host name from DHCP address"
+msgstr "Ш№ЩЉЩ‘Щ† Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ…Щ† Ш№Щ†Щ€Ш§Щ† DHCP"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "DHCP client"
-msgstr "DHCP Ш§Щ„Ш№Щ…ЩЉЩ„ "
+msgid "Toggle to normal mode"
+msgstr "Ш§Щ„Ш§Щ†ШЄЩ‚Ш§Щ„ Ш§Щ„Щ‰ Ш§Щ„Щ€Ш¶Ш№ Ш§Щ„Ш№Ш§ШЇЩЉ"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "ЩЉШЄЩ… ШЁШЇШЎЩ‡ Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Generic"
+msgstr "Generic"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
+msgid "Cylinder %d to %d\n"
+msgstr "Ш§Щ„Ш§ШіШ·Щ€Ш§Щ†Ш© %d Ш§Щ„Щ‰ %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Ш§Щ„Щ…Ш­Щ€Щ‘Щ„ %s: %s"
+msgid "New profile..."
+msgstr "ШЄШґЩѓЩЉЩ„ Ш¬ШЇЩЉШЇ..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "ШЈЩЉ Щ‚Ш±Шµ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Шџ"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "LAN configuration"
-msgstr "ШҐШ№ШЇШ§ШЇ LAN"
+msgid "Display logo on Console"
+msgstr "Ш§Ш№Ш±Ш¶ Ш§Щ„ШґШ№Ш§Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Щ„Щ… ШЄЩ‚Щ… ШЁШЄЩ‡ЩЉШ¦Ш© ШЈЩЉ Щ€Ш§Ш¬Щ‡Ш§ШЄ.\n"
-"Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Щ… ШЈЩ€Щ„Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Ш¶ШєШ· Ш№Щ„Щ‰ 'ШЄЩ‡ЩЉШ¦Ш©'"
+msgid "Windows Domain"
+msgstr "Щ†Ш·Ш§Щ‚ Windows"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Connect..."
-msgstr "Ш§ШЄШµЩ„..."
+msgid "Interface %s (on network %s)"
+msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© %s (Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© %s)"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Disconnect..."
-msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„..."
+msgid "INFO"
+msgstr "INFO"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not connected"
-msgstr "ШєЩЉШ± Щ…ШЄШµЩ„"
+msgid "Wallis and Futuna"
+msgstr "Щ€Ш§Щ„ЩЉШі Щ€ ЩЃЩ€ШЄЩ€Щ†Ш§"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Connected"
-msgstr "Щ…ШЄЩ‘ШµЩ„"
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Щ„Ш§ Ш­Ш§Ш¬Ш© Ш§Щ„Щ‰ Ш§Щ†ШґШ§ШЎ /etc/dhcpd.conf ШЈЩ€Щ„Ш§Щ‹!"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
-msgstr "ШЄШ­Ш°ЩЉШ±, ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§ШЄШµШ§Щ„ ШҐЩ†ШЄШ±Щ†ШЄ ШўШ®Ш±, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ЩЉШіШЄШ®ШЇЩ… ШґШЁЩѓШЄЩѓ"
+msgid "Is FPU present"
+msgstr "Щ‡Щ„ FPU Щ…Щ€Ш¬Щ€ШЇ"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Interface:"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ.\n"
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Gateway:"
-msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ©:"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Ш№ЩЃЩ€Ш§Щ‹, Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ\n"
+"Ш§Ш¶Ш§ЩЃЩЉШ© Ш­ШІЩ„ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Apply"
-msgstr "ШЄШ·ШЁЩЉЩ‚"
+msgid "Build Single NIC -->"
+msgstr "Ш§ШЁЩ†ЩЉ NIC Щ€Ш§Ш­ШЇШ© -->"
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Ш§Щ†Щ‚Ш± Щ‡Щ†Ш§ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ->"
+msgid "Is this correct?"
+msgstr "Щ‡Щ„ Щ‡Ш°Ш§ ШµШ­ЩЉШ­ ? "
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬..."
+msgid "Marshall Islands"
+msgstr "Ш¬ШІШ± Щ…Ш§Ш±ШґШ§Щ„"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Status:"
-msgstr "Ш§Щ„Ш­Ш§Щ„Ш©:"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
 
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Type:"
-msgstr "Ш§Щ„Щ†Щ€Ш№:"
+msgid "Root password"
+msgstr "ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш¬Ш°Ш±"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Internet access"
-msgstr "Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Build All Kernels -->"
+msgstr "Ш§ШЁЩ†ЩЉ ЩѓЩ„ Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© -->"
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ :"
+msgid "if set to yes, report unowned files."
+msgstr "if set to yes, report unowned files."
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ ШЄШ¬ШІШ¦Ш© ШЄШЁШЇЩЉЩ„.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш© Ш№Щ„Щ‰ ШЈЩЉ Ш­Ш§Щ„Шџ"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "State"
-msgstr "Ш§Щ„Ш­Ш§Щ„Ш©"
+msgid "Server IP missing!"
+msgstr "IP Ш§Щ„Ш®Ш§ШЇЩ… Щ…ЩЃЩ‚Щ€ШЇ!"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Driver"
-msgstr "Ш§Щ„Щ…Ш­Ш±Щѓ"
+msgid "Suriname"
+msgstr "ШіЩ€Ш±ЩЉЩ†Ш§Щ…"
 
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Protocol"
-msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„"
+msgid "Enable ACPI"
+msgstr "ШЄЩ…ЩѓЩЉЩ† ACPI"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©"
+msgid "Graphical Environment"
+msgstr "ШЁЩЉШ¦Ш§ШЄ Ш±ШіЩ€Щ…ЩЉШ©"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "ШҐШ№ШЇШ§ШЇ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ..."
+msgid "Gibraltar"
+msgstr "Ш¬ШЁЩ„ Ш·Ш§Ш±Щ‚"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wait please"
-msgstr "Ш§Щ„Ш§Щ†ШЄШёШ§Ш± Щ…Щ† ЩЃШ¶Щ„Щѓ"
+msgid "on Tape Device"
+msgstr "Ш№Щ„Щ‰ Ш§Щ„ШґШ±ЩЉШ·"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Щ„ШҐШіЩ… Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіШЄШ№Щ…Щ„Щ‡ (Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш¬ШЇЩЉШЇ ЩЉШЄЩ… Ш№Щ…Щ„Щ‡ ЩѓЩ†ШіШ®Ш© Щ…Щ† Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Ш­Ш§Щ„ЩЉ) :"
+msgid "Do nothing"
+msgstr "Щ„Ш§ ШЄЩЃШ№Щ„ ШґЩЉШ¦Ш§Щ‹"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "New profile..."
-msgstr "ШЄШґЩѓЩЉЩ„ Ш¬ШЇЩЉШЇ..."
+msgid "Delete Client"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш№Щ…ЩЉЩ„"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„ Ш§Щ„Щ…Ш·Щ„Щ€ШЁ Ш­Ш°ЩЃЩ‡:"
+msgid "Filesystem type: "
+msgstr "Щ†Щ€Ш№ Щ†ШёШ§Щ… Ш§Щ„Щ…ЩЃШ§ШЄ: "
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Del profile..."
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШґЩѓЩЉЩ„..."
+msgid "Starting network..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЁШЇШЎ Ш§Щ„ШґШЁЩѓШ©..."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШґШЁЩѓШ© (%d Щ…Щ€Ш§Ш¦Щ…Ш§ШЄ)"
+msgid "Vietnam"
+msgstr "ЩЃЩЉЩЉШЄЩ†Ш§Щ…"
 
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
-"Щ…ШЇЩЉШ± Ш№Ш±Ш¶ X11 ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰\n"
-"Щ†ШёШ§Щ…Щѓ Щ…Ш№ ШЄШґШєЩЉЩ„ Ш®Ш§ШЇЩ… Ш§Щ„Щ†Щ€Ш§ЩЃШ° X Щ€ ЩЉШЇШ№Щ… ШЄШґШєЩЉЩ„\n"
-"Ш№ШЇШ© Ш¬Щ„ШіШ§ШЄ X Щ…Ш®ШЄЩ„ЩЃШ© Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ."
+msgid "/_Fields description"
+msgstr "/_Щ€ШµЩЃ Ш§Щ„Ш­Щ‚Щ€Щ„"
 
-#: ../../standalone/drakedm:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШЇЩЉШ± Ш§Щ„Ш№Ш±Ш¶"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Ш­ШіЩ‘Щ† Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"ШЄШ№Ш°Ш± ШєЩ„Щ‚ mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Help"
+msgstr "Щ…ШіШ§Ш№ШЇШ©"
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "ШЄШ№Ш°Ш± ШЄЩ†ЩЃЩЉШ°: %s"
+msgid "Your personal phone number"
+msgstr "Ш±Щ‚Щ… Ш§Щ„Щ‡Ш§ШЄЩЃ Ш§Щ„ШґШ®ШµЩЉ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ"
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Ш№Щ„Щ‰ ШЈЩЉ Щ…ШіШ§Ш­Ш© ШЄШ±ЩЉШЇ Ш­ЩЃШё Windows"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
-"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ€ШіШ· ШЈЩ€ Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† Ш§Щ„Щ€ШіШ· Щ…Ш­Щ…ЩЉ Щ…Щ† Ш§Щ„Щ‚Ш±Ш§ШЎШ© Щ„Щ„Ш¬Щ‡Ш§ШІ  %s.\n"
-"ЩЃШ¶Щ„Ш§Щ‹ Ш§ШЇШ®Щ„ Щ€ШіШ· ЩЃЩ‰ Ш§Щ„Щ€Ш­ШЇШ©."
+"ШЄЩ… Ш§Ш±ШіШ§Щ„ Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
+"Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ‡Ш°Ш§ ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ Ш­ШЄЩ‰ ШЄШЁШЇШЈ Ш§Щ„Ш·Ш§ШЁШ№Ш©.\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "ШЄШЈЩѓШЇ Щ…Щ† Щ€Ш¬Щ€ШЇ Ш§Щ„Щ€ШіЩЉШ· Щ„Щ„Щ€Ш­ШЇШ©  %s"
+msgid "Username required"
+msgstr "ЩЉЩЏШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
+"Ш§Ш№ШЄЩ…Ш§ШЇШ§Щ‹ Ш№Щ„Щ‰ Ш§Щ„Щ„ШєШ© Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§ ЩЃЩЉ Щ‡Ш°Ш§ Ш§Щ„Щ‚ШіЩ…, ШіЩЉЩ‚Щ€Щ… DrakX\n"
+"ШЁШ§Ш®ШЄЩЉШ§Ш± ШЄЩ‡ЩЉШ¦Ш© Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШўЩ„ЩЉШ§Щ‹. Ш№Щ…Щ€Щ…Ш§Щ‹,\n"
+"Ш±ШЁЩ…Ш§ Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ‚Ш§ШЁЩ„Ш© ШЁШґЩѓЩ„ Щ…ШЁШ§ШґШ± Щ„Щ„ШєШЄЩѓ:\n"
+"Щ…Ш«Щ„Ш§Щ‹ Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Ш№Ш±ШЁЩЉШ§Щ‹ Щ…ШЄЩѓЩ„Щ…Ш§Щ‹ ШЁШ§Щ„Щ„ШєШ© Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ©, Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ\n"
+"Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ ШіЩ€ЩЉШіШ±ЩЉШ©. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШЄЩѓЩ„Щ… Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ© Щ„ЩѓЩ† Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ ЩѓЩЉШЁЩѓ, Ш±ШЁЩ…Ш§\n"
+"ШЄШ¬ШЇ Щ†ЩЃШіЩѓ ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ…Щ€Щ‚ЩЃ Ш­ЩЉШ« ? ШЄШЄШ·Ш§ШЁЩ‚ Щ„ШєШЄЩѓ Щ…Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­.\n"
+"ЩЃЩЉ Ш§Щ„Ш­Ш§Щ„ШЄЩЉЩ†, ШіШЄШіЩ…Ш­ Щ„Щѓ Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ ШіШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш±\n"
+"Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ†Ш§ШіШЁШ© Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©.\n"
+"\n"
+"Ш§Щ†Щ‚Ш± ШІШ± \"Ш§Щ„Щ…ШІЩЉШЇ\" Щ„Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­\n"
+"Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш©.\n"
+"\n"
+"Ш§Ш°Ш§ Ш§Ш®ШЄШ±ШЄ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ„Ш­Ш±Щ€ЩЃ ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©, ЩЃШіЩЉШіЩ…Ш­ Щ„Щѓ\n"
+"Щ…Ш±ШЁШ№ Ш§Щ„Ш­Щ€Ш§Ш± Ш§Щ„ШЄШ§Щ„ЩЉ ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Ш®ШЄШµШ§Ш±Ш§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄЩЉ\n"
+"ШіШЄШєЩЉШ± Щ€Ш¶Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШЁЩЉЩ† Ш§Щ„Ш­Ш±Щ€ЩЃ Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉШ© Щ€ Ш§Щ„ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©."
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Build the disk"
-msgstr "Ш¬Щ‡ШІ Ш§Щ„Щ‚Ш±Шµ"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш·Ш§ШЁШ№Ш© SMB (Windows 9x/NT)"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Output"
-msgstr "Ш§Щ„Щ†Ш§ШЄШ¬"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Remove a module"
-msgstr "Ш§ШІШ§Щ„Ш© Щ€Ш­ШЇШ©"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd Ш§Щ„Ш®ШµШ§Ш¦Шµ Ш§Щ„Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ©"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Add a module"
-msgstr "Ш§Ш¶Ш§ЩЃШ© Щ€Ш­ШЇШ©"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "SCSI Ш§Щ‡Щ…Щ„ Щ€Ш­ШЇШ§ШЄ Ш§Щ„"
+msgid "Protocol for the rest of the world"
+msgstr "ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ Щ„ШЁЩ‚ЩЉШ© Ш§Щ„Ш№Ш§Щ„Щ…"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "if needed"
-msgstr "Ш§Ш°Ш§ Ш§Ш­ШЄШ¬ШЄЩ‡"
+msgid "Print test pages"
+msgstr "Ш§Ш·ШЁШ№ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "RAID Ш§Щ‡Щ…Щ„ Щ€Ш­ШЇШ§ШЄ Ш§Щ„"
+msgid "64 MB or more"
+msgstr "64 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ ШЈЩ€ ШЈЩѓШ«Ш±"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "force"
-msgstr "Ш§Ш¬ШЁШ§Ш±"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШµЩЃШ­Ш§ШЄ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„ШЄЩЉ ШЄЩ€ШЇ Ш·ШЁШ§Ш№ШЄЩ‡Ш§.\n"
+"Щ…Щ„Ш­Щ€ШёШ©: Ш§Щ„ШµЩЃШ­Ш© Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Щ„ШµЩ€Ш±Ш© ШіШЄШіШЄШєШ±Щ‚ Щ€Щ‚ШЄШ§Щ‹ Ш·Щ€ЩЉЩ„Ш§Щ‹ Щ„Ш·ШЁШ§Ш№ШЄЩ‡Ш§ Щ€ Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш§ШЄ "
+"Ш§Щ„Щ„ЩЉШІШ± ШЁЩѓЩ…ЩЉШ© Ш°Ш§ЩѓШ±Ш© Щ‚Щ„ЩЉЩ„Ш© Щ‚ШЇ Щ„Ш§ ЩЉШЄЩ… Ш·ШЁШ§Ш№ШЄЩ‡Ш§ Щ…Ш·Щ„Щ‚Ш§Щ‹. ЩЃЩЉ ШЈШєЩ„ШЁ Ш§Щ„ШЈШ­ЩЉШ§Щ† ЩЉЩѓЩЃЩЉ ШЈЩ† "
+"ШЄШ·ШЁШ№ Ш§Щ„ШµЩЃШ­Ш© Ш§Щ„ШҐШ®ШЄШЁШ§Ш±ЩЉШ© Ш§Щ„Щ‚ЩЉШ§ШіЩЉШ©."
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd Ш§Щ„Ш®ШµШ§Ш¦Шµ Ш§Щ„Ш§Ш®ШЄЩЉШ§Ш±ЩЉШ©"
+msgid "Please select the device where your %s is attached"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ…ШЄШµЩ„ ШЁЩ‡ %s"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Expert Area"
-msgstr "Щ…Щ†Ш·Щ‚Ш© Ш§Щ„Ш®ШЁШ±Ш§ШЎ"
+msgid "Not formatted\n"
+msgstr "ШєЩЉШ± Щ…Ш¬Щ‡ШІ\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "kernel version"
-msgstr "Ш§ШµШЇШ§Ш±Ш© Ш§Щ„Щ„ШЁ"
+msgid "Periodic Checks"
+msgstr "ШЄШЈЩѓШЇ ШЇЩ€Ш±ЩЉ"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "default"
-msgstr "Ш§Щ„Щ…Ш±Ш¬Ш№"
+msgid "PXE Server Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… PXE"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "General"
-msgstr "Ш№Ш§Щ…"
+msgid "Backup the system files before:"
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ… Щ‚ШЁЩ„:"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "ШµЩ†Ш№ Щ‚Ш±Шµ Щ…Ш±Щ† Щ„ШЁШЇШЎ Ш§Щ„Щ†ШёШ§Щ…"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Щ„Щ„Ш­Ш§ШіЩ€ШЁ Ш§Щ„Ш°ЩЉ ШіЩЉШіШЄШ®ШЇЩ… Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩѓШ№Щ…ЩЉЩ„."
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "drakfloppy"
-msgstr "ШЇШ±ЩЉЩѓ Щ„Щ„Ш§Щ‚Ш±Ш§Шµ Ш§Щ„Щ…Ш±Щ†Ш©"
+msgid "First floppy drive"
+msgstr "ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…Ш±Щ† Ш§Щ„ШЈЩ€Щ„Щ‰"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Size"
-msgstr "Ш­Ш¬Щ…"
+msgid "/File/_Quit"
+msgstr "/Щ…Щ„ЩЃ/_Ш®Ш±Щ€Ш¬"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Module name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ€Ш­ШЇШ©"
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Post Uninstall"
-msgstr "Щ…Ш§ ШЁШ№ШЇ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Choose the new size"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­Ш¬Щ… Ш§Щ„Ш¬ШЇЩЉШЇ"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove fonts on your system"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш®Ш·Щ€Ш· Щ…Щ† Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Media class"
+msgstr "ЩЃШ¦Ш© Ш§Щ„Щ€ШіЩЉШ·"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Initial tests"
-msgstr "Ш§Щ„ШҐШ®ШЄШЁШ§Ш±Ш§ШЄ Ш§Щ„ШЈЩ€Щ„ЩЉШ©"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr "Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ Щ…Щ† Щ‚ШЁЩ„ Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Scannerdrake."
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Post Install"
-msgstr "Щ…Ш§ ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Faroe Islands"
+msgstr "Ш¬ШІШ± Ш§Щ„ЩЃЩЉШ±Щ€"
 
 #: ../../standalone/drakfont:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr "Ш«ШЁЩ‘ШЄ Щ€ Ш­Щ€Щ‘Щ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Restart XFS"
+msgstr "ШЈШ№ШЇ ШЄШґШєЩЉЩ„ XFS"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy fonts on your system"
-msgstr "Ш§Щ†ШіШ® Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ‰ Щ†ШёШ§Щ…Щѓ"
+msgid "Add host/network"
+msgstr "ШЈШ¶ЩЃ Щ…ШіШЄШ¶ЩЉЩЃ/ШґШЁЩѓШ©"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Remove List"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Selected All"
-msgstr "ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ЩѓЩ„"
+msgid "Please enter the directory to save to:"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… Ш§Щ„Ш­ЩЃШё ЩЃЩЉЩ‡:"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Unselected All"
-msgstr "ШЄЩ… Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ЩѓЩ„"
+msgid "Model name"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш±Ш§ШІ"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
-msgstr "ШҐШ¶ШєШ· Щ‡Щ†Ш§ ШҐШ°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§."
+msgid "Albania"
+msgstr "ШЈЩ„ШЁШ§Щ†ЩЉШ§"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "click here if you are sure."
-msgstr "Ш§Ш¶ШєШ· Щ‡Щ†Ш§ ШҐШ°Ш§ ЩѓЩ†ШЄ Щ…ШЄШЈЩѓШЇШ§."
+msgid "No CDR/DVDR in drive!"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ‚Ш±Шµ CD-R/DVD-R ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install List"
-msgstr "Ш«ШЁЩ‘ШЄ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©"
+msgid "British Indian Ocean Territory"
+msgstr "Щ…Щ†Ш·Щ‚Ш© Ш¬ШІШ± Ш§Щ„Щ…Ш­ЩЉШ· Ш§Щ„Щ‡Ш§ШЇЩЉ Ш§Щ„ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ©"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ ШЈЩ€ ШЇЩ„ЩЉЩ„ Ш§Щ„Ш®Ш·Щ€Ш· Щ€ Ш§Ш¶ШєШ· 'Ш§Ш¶Ш§ЩЃШ©'"
+msgid "Normal Mode"
+msgstr "Щ€Ш¶Ш№ Ш№Ш§ШЇЩЉ"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
-"Щ‚ШЁЩ„ ШЄШ«ШЁЩЉШЄ ШЈЩЉ Ш®Ш·Щ€Ш· ШЄШЈЩѓШЇ ШЈЩ†Щ‡ Щ„ШЇЩЉЩѓ Ш§Щ„Ш­Щ‚ ШЁШ§ШіШЄШ®ШЇШ§Щ…Щ‡Щ… Щ€ ШЄШ«ШЁЩЉШЄЩ‡Щ… Ш№Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ….\n"
+"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† Щ…Ш±Ш§Щ‚ШЁ cron Щ…Щ€Ш¬Щ€ШЇ Ш¶Щ…Щ† Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…. \n"
 "\n"
-"-ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш®Ш·Щ€Ш· ШЁШ§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„Ш№Ш§ШЇЩЉШ©. ЩЃЩЉ Ш­Ш§Щ„Ш§ШЄ Щ†Ш§ШЇШ±Ш©, Щ‚ШЇ ШЄШЄШіШЁШЁ Ш§Щ„Ш®Ш·Щ€Ш· "
-"Ш§Щ„Щ…ШІЩЉЩЃШ© ЩЃЩЉ ШЄШ№Щ„ЩЉЩ‚ Ш®Ш§ШЇЩ… X."
+"Щ„Ш§Ш­Шё ШЈЩ† ЩѓЩ„ Щ€ШіШ§Ш¦Ш· Ш§Щ„ШґШЁЩѓШ© ШЄШіШЄШ®ШЇЩ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ."
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic Printers"
-msgstr "Ш·Ш§ШЁШ№Ш§ШЄ Ш№Ш§ШЇЩЉШ© (Generic)"
+msgid "Printer connection type"
+msgstr "Щ†Щ€Ш№ Щ€ШµЩ„Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Щ„Ш§ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Ш§Щ„ШґШЁЩѓШ© %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghostscript"
-msgstr "Ghostscript"
+msgid "Malayalam"
+msgstr "Ш§Щ„Щ…Ш§Щ„Ш§ЩЉШ§Щ„Ш§Щ…"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Ш§Щ„ШЄЩЉ ШіШЄШЇШ№Щ… Ш§Щ„Ш®Ш·Щ€Ш· :"
+msgid "Option %s out of range!"
+msgstr "Ш§Щ„Ш®ЩЉШ§Ш± %s Ш®Ш§Ш±Ш¬ Ш§Щ„Щ…ШЄЩ€ШіШ·!"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
-"\n"
-"Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2001-2002 Щ„ЩЂMandrakeSoft \n"
-"\tDUPONT Sebastien (Ш§Щ„ШҐШµШЇШ§Ш± Ш§Щ„ШЈШµЩ„ЩЉ)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш­Ш±; ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ€ШІЩЉШ№Ш© Щ€/ШЈЩ€ ШЄШ№ШЇЩЉЩ„Щ‡\n"
-" ШЄШ­ШЄ ШЁЩ†Щ€ШЇ Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© (GPL) ЩѓЩ…Ш§ Щ†ЩЏШґЩђШ±ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
-" Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш©; ШҐЩ…Ш§ Ш§ШҐШµШЇШ§Ш± Ш§Щ„Ш«Ш§Щ†ЩЉ Щ…Щ† Ш§Щ„ШЄШ±Ш®ЩЉШµ ШЈЩ€\n"
-" ШЈЩЉ Щ†ШіШ®Ш© ШЄШ§Щ„ЩЉШ© (Ш­ШіШЁ Ш§Ш®ШЄЩЉШ§Ш±Щѓ).\n"
-"\n"
-" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ ЩЉЩЏЩ€ШІЩ‘ЩЋШ№ Ш№Щ„Щ‰ ШЈЩ…Щ„ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…ЩЃЩЉШЇШ§,\n"
-" لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n"
-" Щ„Щ„ШҐШЄШ¬Ш§Ш± ШЈЩ€ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШєШ±Ш¶ Щ…Ш№ЩЉЩ†. Ш§Щ†ШёШ±\n"
-" Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„.\n"
-"\n"
-" ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ‚ШЇ ШЄШіЩ„Щ…ШЄ Щ†ШіШ®Ш© Щ…Щ† ШЄШ±Ш®ЩЉШµ GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш©\n"
-" Щ…Ш№ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬; ЩЃЩЉ Ш­Ш§Щ„Ш© Ш№ШЇЩ… ШЄШіЩ„Щ… Ш§Щ„Ш±Ш®ШµШ© Ш±Ш§ШіЩ„ Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш© Ш№Щ„Щ‰ "
-"Ш§Щ„Ш№Щ†Щ€Ш§Щ†  Ш§Щ„ШЄШ§Щ„ЩЉ\n"
-" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
-"02111-1307, USA.\n"
-"\n"
-" ШґЩѓШ± Ш®Ш§Шµ Ш§Щ„Щ‰:\n"
-"    -  pfm2afm:   \n"
-"\t Щ…Щ† Ken Borgendale:\n"
-"\t    ЩЉШ­Щ€Щ‘Щ„ Ш®Ш·Щ€Ш· .pfm ЩЃЩЉ Windows Ш§Щ„Щ‰ Ш®Ш·Щ€Ш· .afm (Adobe Font Matrix)\n"
-"    -  type1inst:\n"
-"\t Щ…Щ† James Macnicol:  \n"
-"\t    ЩЉЩ€Щ„ШЇ type1inst Щ…Щ„ЩЃШ§ШЄ fonts.dir Щ€ fonts.scale Щ€ Fontmap.\n"
-"    -  ttf2pt1:    \n"
-"\t  Щ…Щ† Andrew Weeks, Frank Siegert, Thomas Henlich Щ€ Sergey Babkin  \n"
-"             ЩЉШ­Щ€Щ„ Ш®Ш·Щ€Ш· ttf Ш§Щ„Щ‰ Ш®Ш·Щ€Ш· afm Щ€ pfb\n"
+msgid "Connect %s"
+msgstr "Ш§ШЄШµЩ„ ШЁЩЂ %s"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "About"
-msgstr "Ш­Щ€Щ„"
+msgid "Restarting CUPS..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ CUPS..."
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Font List"
-msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Printing/Scanning/Photo Cards on \"%s\""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Advanced Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Щ…ШЄЩ‚ШЇЩ…Ш©"
+msgid "Duplicate mount point %s"
+msgstr "Щ†Щ‚Ш·Ш© ШЄШ­Щ…ЩЉЩ„ Щ…ЩѓШ±Ш±Щ‘Ш© %s"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Uninstall Fonts"
-msgstr "Ш§Ш®Ш°ЩЃ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "if set to yes, run chkrootkit checks."
+msgstr "if set to yes, run chkrootkit checks."
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr "Ш§Ш­ШµЩ„ Ш№Щ„Щ‰ Ш®Ш·Щ€Ш· Windows"
+msgid "Connection Configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ€ШµЩ„Ш©"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Import Fonts"
-msgstr "Ш§ШіШЄЩЉШ±Ш§ШЇ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Unknown|Generic"
+msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ|Ш№Ш§Щ…"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
+"ЩЃЩЉ Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Ш°ЩЉ ШЄЩ‚Щ€Щ… ЩЃЩЉЩ‡ ШЁШЄШ«ШЁЩЉШЄ Mandrake Linux, Щ‚ШЇ ЩЉЩѓЩ€Щ† ШЄЩ… ШЄШ­ШЇЩЉШ«\n"
+"ШЁШ№Ш¶ Ш§Щ„Ш­ШІЩ… Щ…Щ†Ш° Ш§?ШµШЇШ§Ш± Ш§Щ„Щ…ШЁШЇШ¦ЩЉ, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ШЄЩ… Ш§ШµЩ„Ш§Ш­ ШЁШ№Ш¶ Ш§Щ„Ш№ЩЉЩ€ШЁ\n"
+"ШЈЩ€ ШЄЩ… Ш­Щ„ Ш§Щ„Щ…ШґШ§ЩѓЩ„ Ш§?Щ…Щ†ЩЉШ©. Щ„ЩѓЩЉ ШЄШіШЄЩЃЩЉШЇ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ,ЩЉЩ…ЩѓЩ†Щѓ\n"
+"Ш§?Щ† ШЄЩ†ШІЩЉЩ„ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ Ш№ШЁШ± Ш§?Щ†ШЄШ±Щ†ШЄ. Ш§Ш®ШЄШ±\n"
+"\"Щ†Ш№Щ…\" Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ Ш№Ш§Щ…Щ„Ш©, ШЈЩ€ \"?\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄЩЃШ¶Щ„\n"
+"ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ ?Ш­Щ‚Ш§Щ‹.\n"
+"\n"
+"Ш§Ш®ШЄЩЉШ§Ш± \"Щ†Ш№Щ…\" ЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§?Щ…Ш§ЩѓЩ† Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† Щ…Щ†Щ‡Ш§ Ш§Щ„Ш­ШµЩ€Щ„\n"
+"Ш№Щ„Щ‰ Ш§Щ„ШЄШ­ШЇЩЉШ«Ш§ШЄ. Ш§Ш®ШЄШ± Ш§Щ„Щ…ЩѓШ§Щ† Ш§Щ„ШЈЩ‚Ш±ШЁ Ш§Щ„ЩЉЩѓ. ШіЩЉШЄЩ… Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШ§Щ„Ш­ШІЩ…\n"
+"Ш±Ш§Ш¬Ш№ Ш§Ш®ШЄЩЉШ§Ш±Ш§ШЄЩѓ, Ш«Щ… Ш§Ш¶ШєШ· \"Ш«ШЁЩ‘ШЄ\" Щ„ШЄЩ†ШІЩЉЩ„ Щ€ ШЄШ«ШЁЩЉШЄ\n"
+"Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©, ШЈЩ€ \"Ш§Щ„ШєШ§ШЎ\" ?Ш­ШЁШ§Ш· Ш§Щ„ШЄШ­ШЇЩЉШ«."
+
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "done"
-msgstr "Ш§Щ†ШЄЩ‡Щ‰"
+msgid "Quit"
+msgstr "Ш®Ш±Щ€Ш¬"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "xfs restart"
-msgstr "xfs restart"
+msgid "Myanmar"
+msgstr "Щ…ЩЉШ§Щ†Щ…Ш§Ш±"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr "ШЈШЁШ·Щ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Auto allocate"
+msgstr "ШЄШ­ШЇЩЉШЇ ШўЩ„ЩЉ"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restart XFS"
-msgstr "ШЈШ№ШЇ ШЄШґШєЩЉЩ„ XFS"
+msgid "Check bad blocks?"
+msgstr "ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„ШЁЩ„Щ€ЩѓШ§ШЄ Ш§Щ„ШіЩЉШ¦Ш©Шџ"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr "ШЈШЁШ·Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…Ш¤Щ‚ШЄШ©"
+msgid "Other MultiMedia devices"
+msgstr "ШЈШ¬Щ‡ШІ Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ© ШЈШ®Ш±Щ‰"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "type1inst building"
-msgstr "ШЁЩ†Ш§ШЎ type1inst"
+msgid "No remote machines"
+msgstr "Щ„Ш§ ШЈШ¬Щ‡ШІШ© ШЁШ№ЩЉШЇШ©"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "pfm fonts conversion"
-msgstr "ШЄШ­Щ€ЩЉЩ„ Ш®Ш·Щ€Ш· pfm"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+"\n"
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ… ЩЃЩЉ Щ…Ш№Ш§Щ„Ш¬ Ш§Ш№ШЇШ§ШЇ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ\n"
+"\n"
+"Щ‡Ш°Ш§ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШіЩЉШіШ§Ш№ШЇЩѓ Ш№Щ„Щ‰ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
+"\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Ш·Ш§ШЁШ№Ш©/Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄЩ€ШµЩЉЩ„Щ‡Ш§ Ш§Щ„Щ‰ Щ‡Ш°Ш§ "
+"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ€ Щ‚Щ… ШЁШЄШґШєЩЉЩ„Щ‡Ш§ ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§/Щ…Щ†Щ‡Щ… ШўЩ„ЩЉШ§Щ‹.\n"
+"\n"
+" Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ\" Ш№Щ†ШЇЩ…Ш§ ШЄЩѓЩ€Щ† Щ…ШіШЄШ№ШЇШ§Щ‹, Щ€ Ш№Щ„Щ‰ \"Ш§Щ„ШєШ§ШЎ\" Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№ШЇШ§ШЇ "
+"Ш§Щ„Ш·Ш§ШЁШ№Ш©/Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўЩ†."
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr "ШЄШ­Щ€ЩЉЩ„ Ш®Ш·Щ€Ш· ttf"
+msgid "Authentication NIS"
+msgstr "ШЄШ­Щ‚Щ‚ NIS"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr "Ghostscript referencing"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Ш®ЩЉШ§Ш± ``ШЄШґШЇЩЉШЇ Ш®ЩЉШ§Ш±Ш§ШЄ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±`` ШЁШЇЩ€Щ† Щ‚Ш§Ш¦ШЇШ© Щ…Щ† ШЇЩ€Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Fonts conversion"
-msgstr "ШЄШ­Щ€ЩЉЩ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Щ…ЩѓЩ†Ш© Ш­Ш§Щ„ЩЉШ§"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type install done"
-msgstr "ШЄЩ… ШЄШ«ШЁЩЉШЄ Ш®Ш·Щ€Ш· True Type"
+msgid "Card IO_0"
+msgstr "Card IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr "Ш±Ш¬Ш§ШЎ Ш§Щ†ШЄШёШ± ШЈШ«Щ†Ш§ШЎ Ш№Щ…Щ„ЩЉШ© ttmkfdir..."
+msgid "United Arab Emirates"
+msgstr "Ш§Щ„ШҐЩ…Ш§Ш±Ш§ШЄ Ш§Щ„Ш№Ш±ШЁЩЉШ© Ш§Щ„Щ…ШЄШ­ШЇШ©"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type fonts installation"
-msgstr "ШЄШ«ШЁЩЉШЄ Ш®Ш·Щ€Ш· True Type"
+msgid "Card IO_1"
+msgstr "Card IO_1"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fonts copy"
-msgstr "Щ†Щ‚Щ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Thailand"
+msgstr "ШЄШ§ЩЉЩ„Ш§Щ†ШЇ"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Search for fonts in installed list"
-msgstr "Ш§ШЁШ­Ш« Ш№Щ† Ш§Щ„Ш®Ш·Щ€Ш· ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Ш«ШЁШЄШ©"
+msgid "Routers:"
+msgstr "Ш§Щ„Щ…Щ€Ш¬Щ‡Ш§ШЄ:"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† ШҐЩЉШ¬Ш§ШЇ ШЈЩЉ Ш®Ш·.\n"
+msgid "Kazakhstan"
+msgstr "ЩѓШ§ШІШ§Ш®ШіШЄШ§Щ†"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Reselect correct fonts"
-msgstr "ШЈШ№ШЇ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„ШµШ­ЩЉШ­Ш©"
+msgid "Display all available remote CUPS printers"
+msgstr "Ш§Ш№Ш±Ш¶ ЩѓЩ„ Ш·Ш§ШЁШ№Ш§ШЄ CUPS Ш§Щ„ШЁШ№ЩЉШЇШ© Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† Ш§ЩЉШ¬Ш§ШЇ ШЈЩЉ Ш®Ш·Щ€Ш· ЩЃЩЉ ШЄШ¬ШІШ¦Ш§ШЄЩѓ Ш§Щ„Щ…Ш­Щ…Щ„Ш©"
+msgid "Mandrake Linux Installation %s"
+msgstr "ШЄШ«ШЁЩЉШЄ Mandrake Linux %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "no fonts found"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Ш®Ш·Щ€Ш·"
+msgid "Thai keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄШ§ЩЉЩ„Ш§Щ†ШЇЩЉШ©"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "parse all fonts"
-msgstr "ШЄШ­Щ„ЩЉЩ„ ЩѓЩ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+msgid "Dialup options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ…Ш«ШЁШЄШ©"
+msgid "Bouvet Island"
+msgstr "Ш¬ШІЩЉШ±Ш© ШЁЩ€ЩЃЩЉЩ‡"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
-msgstr "Ш§ШЁШ­Ш« ЩЃЩЉ Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ…Ш«ШЁШЄШ©"
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"ШЈЩ‡Щ„Ш§ ШЁЩѓ ЩЃЩЉ ШЈШЇШ§Ш© Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ!\n"
-"\n"
-"%s\n"
+"ШєЩЉШ± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬!\n"
 "\n"
-"Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш© Щ„ШЄШґШєЩЉЩ„ Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„ШҐШ№ШЇШ§ШЇ."
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш§Щ„Щ…ШіЩ…Щ‰ \"%s\" ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© Щ€ Ш§Щ†Щ‚Ш± Щ…Щ€Ш§ЩЃЩ‚ Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ.\n"
+"Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Ш§Щ„Щ‚Ш±Шµ Щ„ШЇЩЉЩѓ, Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ Щ„ШЄШ¬Щ†ШЁ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† Щ‡Ш°Ш§ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Щ…ШґШ§Ш±ЩѓШ© ШҐШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Polish"
+msgstr "Ш§Щ„ШЁЩ€Щ„Щ†ШЇЩЉШ©"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш№ШЇШ§ШЇ ШЈЩЉ Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄЩ†ШµЩЉШЁ, Щ€ Щ‡Щ€ Щ…Щ…ЩѓЩ‘ЩЋЩ† Ш§Щ„ШўЩ†."
+msgid "\t-Network by webdav.\n"
+msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ webdav.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄЩ†ШµЩЉШЁ, Щ€ Щ„ЩѓЩ†Щ‡ ШєЩЉШ± Щ…Щ…ЩѓЩ‘ЩЋЩ† Ш§Щ„ШўЩ†"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Щ…Щ€Ш§Ш¦Щ… Ш§ЩЉШ«Ш±Щ†ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ. ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШґШєЩЉЩ„ ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ."
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
-msgstr ""
-"ШЄЩ… ШҐШ№ШЇШ§ШЇ ЩѓЩ„ ШґШ¦.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Ш№ Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЈШ®Ш±Щ‰ ЩЃЩЉ ШґШЁЩѓШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… "
-"ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉ (DHCP)."
+msgid "Netmask"
+msgstr "Netmask"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ Щ…ШґШ§ЩѓЩ„ ЩЃЩЉ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш© %s"
+msgid "No hard drives found"
+msgstr "Щ†Ш№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШЈЩ‚Ш±Ш§Шµ ШµЩ„ШЁШ©"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ†ШµЩ€Шµ Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ© Щ€ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Щ€ ШЁШЇШЎ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШ№ШЇШ§ШЇ..."
+msgid "2 buttons"
+msgstr "ШІШ±Щ‘ЩЉЩ†"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr ""
-"ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЄШ№Ш§Ш±Ш¶ ЩЃЩЉ Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Ш§Щ„Щ…ШЁШЇШ¦ЩЉ ЩЃЩЉ Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ЩЂ%s!\n"
+msgid "What kind is your ISDN connection?"
+msgstr "Щ…Ш§ Щ‡Щ€ Щ†Щ€Ш№ Щ€ШµЩ„Ш© ISDN Щ„ШЇЩЉЩѓШџ"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr "Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ„Щ… ШЄЩ†ШЄЩ‡ ШЁЩЂ`0', Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш®Ш±Щ€Ш¬."
+msgid "Label"
+msgstr "Ш№Щ†Щ€Ш§Щ†"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr "ШҐШ№Ш§ШЇШ© ШҐШ№ШЇШ§ШЇ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Щ€ Ш®Ш§ШЇЩ… DHCP"
+msgid "Save on floppy"
+msgstr "Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Щ‚Ш±Шµ Щ…Ш±Щ†"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr "Ш§Щ„ШҐЩЉШ¬Ш§Ш± Ш§Щ„ШЈЩ‚ШµЩ‰ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
+msgid "Printer auto-detection"
+msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr "Ш§Щ„ШҐЩЉШ¬Ш§Ш± Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ (ШЁШ§Щ„Ш«Щ€Ш§Щ†ЩЉ)"
+msgid "Which of the following is your ISDN card?"
+msgstr "ШЈЩЉ Щ…Щ† Ш§Щ„ШўШЄЩЉ Щ‡ЩЉ ШЁШ·Ш§Щ‚Ш© ISDN Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓШџ"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr "Ш­ШЇЩ€ШЇ DHCP end"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ ШґШ§Ш¦Ш№ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ„Щ‰ ШґШЁЩѓШ§ШЄ TCP/IP.\n"
+"Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© ШЄЩ€ЩЃШ± Щ€ШёШ§Ш¦ЩЃ NFS Щ„Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§ШЇЩ…Ш©, Щ€ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+"Щ…Щ„ЩЃ /etc/exports."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "The DHCP start range"
-msgstr "Ш­ШЇЩ€ШЇ DHCP start"
+msgid "Msec"
+msgstr "Msec"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "The internal domain name"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ†Ш·Ш§Щ‚ Ш§Щ„ШЇШ§Ш®Щ„ЩЉ"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> Notice, a label changed:\n"
+"%s"
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The DNS Server IP"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Ш®Ш§ШЇЩ… DNS"
+msgid "Number of capture buffers:"
+msgstr "Number of capture buffers:"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "(This) DHCP Server IP"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Ш®Ш§ШЇЩ… DHCP (Щ‡Ш°Ш§)"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Your choice? (0/1, default `%s') "
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
 "\n"
-msgstr ""
-"ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
 "\n"
-"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш®ЩЉШ§Ш±Ш§ШЄ Щ…Ш®ШЄЩ„ЩЃШ© Щ„ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
-"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ†Щ‡Щ„Щ… Щ…Ш§Ш°Ш§ ЩЉШ№Щ†ЩЉ Ш§Щ„Ш®ЩЉШ§Ш± ЩЃЩѓЩ„ Щ…Ш§ Ш№Щ„ЩЉЩѓ Щ‡Щ€ ШЄШ±ЩѓЩ‡ ЩѓЩ…Ш§ Щ‡Щ€.\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
 "\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Local Network adress"
-msgstr "Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid "French"
+msgstr "Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш­ЩЃШё Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Щ€ Ш§ЩЃШЄШ±Ш§Ш¶ ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… DHCP Щ…ШіШЁЩ‚Ш§Щ‹; ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ "
-"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щ†ЩЉ ШЈШіШЄШ·ЩЉШ№ Щ‚Ш±Ш§ШЎШ© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ Щ„Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­; "
-"ШіШЈЩ‚Щ€Щ… ШЁШҐШ№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Щ€ Щ„Щ† ШЈЩ‚Щ€Щ… ШЁШЈЩЉ ШґШ¦ ШЄШ¬Ш§Щ‡ ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP.\n"
-"\n"
-"Щ…ШЇШ®Щ„ DNS Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ Щ‡Щ€ Ш§ШіЩ… Ш§Щ„Ш®Ш§ШЇЩ… Ш§Щ„Щ…Ш®ШЁШ¦ЩЉ Ш№Щ„Щ‰ Ш§Щ„Ш¬ШЇШ§Ш± Ш§Щ„Щ†Ш§Ш±ЩЉ. ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЁШЇШ§Щ„ Ш°Щ„Щѓ "
-"ШЁШ№Щ†Щ€Ш§Щ† IP Щ„Щ„ЩЂDNS Ш§Щ„Ш®Ш§Шµ ШЁЩ…Щ€ЩЃШ± Ш®ШЇЩ…Ш© Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ, Щ…Ш«Щ„.\n"
-"\t\t      \n"
-"Ш§Щ† Щ„Щ… ЩЉЩѓЩ† Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Щ€ Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… DHCP Щ„Щѓ.\n"
-"\n"
+msgid "Czech (QWERTY)"
+msgstr "Ш§Щ„ШЄШґЩЉЩѓЩЉШ© (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ"
 
 #: ../../standalone/drakgw:1
 #, c-format
+msgid "Net Device"
+msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШЁЩѓШ©"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Щ…Щ„Ш®Шµ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
-"Ш§Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ Щ„ЩЂ`%s':\n"
-"\n"
-"Ш§Щ„ШґШЁЩѓШ©: %s\n"
-"Ш№Щ†Щ€Ш§Щ† Ш§Щ„ЩЂIP: %s\n"
-"ШµЩЃШ© Ш§Щ„ЩЂIP: %s\n"
-"Ш§Щ„Щ…ШґШєЩ„: %s"
+" (Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ©: /dev/lp0, /dev/lp1, ..., Щ…Щ…Ш§ШґЩ„ Щ„ЩЂ LPT1:, LPT2:, ..., "
+"Ш·Ш§ШЁШ№Ш© USB Ш§Щ„ШЈЩ€Щ„ЩЉ: /dev/usb/lp0, Ш·Ш§ШЁШ№Ш© USB Ш§Щ„Ш«Ш§Щ†ЩЉШ©: /dev/usb/lp1, ...)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Current interface configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
+msgid "Next"
+msgstr "Ш§Щ„ШЄШ§Щ„ЩЉ"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Show current interface configuration"
-msgstr "ШЈШёЩ‡Ш± ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Ш№Щ„Щ‰ Ш§Щ„ШЄШ¬ШІШ¦Ш© %s\n"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
-msgstr "Щ„Ш§ (Щ„Щ„Ш®ШЁШ±Ш§ШЎ ЩЃЩ‚Ш·)"
+msgid "CHAP"
+msgstr "CHAP"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Automatic reconfiguration"
-msgstr "Ш§Ш№ШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ©"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
-"ШЄШ­Ш°ЩЉШ±, Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШґШЁЩѓШ© (%s) Щ…Ш№ШЇЩ‘ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
 "\n"
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ§Щ‹?\n"
+"ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓЩ….\n"
 "\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Щ‚ЩЉШ§Щ… ШЁШ°Щ„Щѓ ЩЉШЇЩ€ЩЉШ§Щ‹ Щ„ЩѓЩ† ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ Ш№Щ„Щ… ШЁЩ…Ш§ ШЄЩЃШ№Щ„."
+"Щ…Ш№Ш§Щ€Щ…Щ„Ш§ШЄ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ Ш§Щ„Щ‚ШіЩ… Ш§Щ„ШЈЩЉШіШ±"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface already configured"
-msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© Щ…Ш№ШЇЩ‘Ш© Щ…ШіШЁЩ‚Ш§!"
+msgid "Puerto Rico"
+msgstr "ШЁЩ€Ш±ШЄЩ€Ш±ЩЉЩѓЩ€"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… ШЁЩ‡ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
+"Ш­ШІЩ…Ш© 'ImageMagick' Ш¶Ш±Щ€Ш±ЩЉШ© Щ„ЩѓЩЉ ЩЉШЄЩ… Ш§ЩѓЩ…Ш§Щ„ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©.\n"
+"Ш§Ш¶ШєШ· \"Щ…Щ€Ш§ЩЃЩ‚\" Щ„ШЄШ«ШЁЩЉШЄ 'ImageMagick' ШЈЩ€ \"Ш§Щ„ШєШ§ШЎ\" Щ„Щ„Ш®Ш±Щ€Ш¬"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Ш§Щ„Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ© \"ШµЩЃ Ш±Щ‚Щ…ЩЉ\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"ЩЉЩ€Ш¬ШЇ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Щ€Ш§Ш­ШЇ ЩЃЩ‚Ш· Щ…Ш№ШЇЩ‘ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ:\n"
+"ШіЩЉШЄЩ… Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ… Щ„ЩѓЩЉ ШЄШЄЩ… ШЄШ±Щ‚ЩЉШ© Ш§Щ„Щ†ШёШ§Щ…: %s\n"
 "\n"
-"%s\n"
 "\n"
-"Щ†Ш­Щ† Ш№Щ„Щ‰ Щ€ШґЩѓ Ш§Ш№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Ш§ Ш§Щ„Щ…Щ€Ш§Ш¦Щ…."
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш­Ш°ЩЃ Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ… ЩЃШ№Щ„Ш§Щ‹Шџ\n"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© "
+msgid "Anguilla"
+msgstr "ШЈЩ†ШєЩ€ЩЉЩ„Ш§"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Щ…Щ€Ш§Ш¦Щ… Ш§ЩЉШ«Ш±Щ†ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ. ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШґШєЩЉЩ„ ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ."
+msgid "NIS Domain"
+msgstr "Щ†Ш·Ш§Щ‚ NIS"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Щ„Ш§ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
+"\n"
+"-Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…:\n"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш©  %s"
+msgid "Antarctica"
+msgstr "Ш§Щ„Щ‚Ш·ШЁ Ш§Щ„Ш¬Щ†Щ€ШЁЩЉ"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© %s (ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ€Ш­ШЇШ© %s)"
+msgid "Mount options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Net Device"
-msgstr "Ш¬Щ‡Ш§ШІ Ш§Щ„ШґШЁЩѓШ©"
+msgid "Jamaica"
+msgstr "Ш¬Ш§Щ…Ш§ЩЉЩѓШ§"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"\n"
-"ШЈЩ…Ш«Щ„Ш©:\n"
-"\t\tppp+ Щ„Щ€ШµЩ„Ш§ШЄ Ш§Щ„Щ…Щ€ШЇЩ… Щ€ DSL, \n"
-"\t\teth0, ШЈЩ€ eth1 Щ„Щ€ШµЩ„Ш§ШЄ Ш§Щ„ЩѓЩЉШЁЩ„, \n"
-"\t\tippp+ Щ„Щ€ШµЩ„Ш§ШЄ ISDN.\n"
+"Ш№ЩЉЩ† Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш®Ш§Щ… Ш§Щ„Щ‰ ШЈШ¬Щ‡ШІШ© ЩЃЩЉ Щ€Ш¶Ш№ Ш§Щ„ЩѓЩ„ЩЉШґЩЉЩ‡ (Щ…Ш«Щ„ ШЄШ¬ШІШ¦Ш§ШЄ\n"
+"Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШµЩ„ШЁШ©), Щ„Щ„Ш§ШіШЄШ®Ш§Щ… ЩЃЩЉ ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Щ…Ш«Щ„ Oracle ШЈЩ€ Щ…ШґШєЩ„Ш§ШЄ DVD"
 
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІЩѓ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
-"ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ШіЩЉЩ…ЩѓЩ† Щ„Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰ ЩЃЩЉ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ† ШЄШіШЄШ®ШЇЩ… Щ€ШµЩ„Ш© "
-"Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ„Щ‡Ш°Ш§ Ш§Щ„Ш­Ш§ШіЩ€ШЁ.\n"
-"\n"
-"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Щ€ШµЩ„Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… drakconnect Щ‚ШЁЩ„ "
-"Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Щ…Щ„Ш­Щ€ШёШ©: ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Щ€Ш§Ш¦Щ… Щ„Щ„ШґШЁЩѓШ© ЩѓЩЉ ШЄЩ‚Щ€Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© (LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Please wait, preparing installation..."
+msgstr "Ш§Щ†ШЄШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Ш¶ЩЉШ± Щ„Щ„ШЄШ«ШЁЩЉШЄ..."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Щ…ШґШ§Ш±ЩѓШ© ШҐШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Щ…ЩѓЩ‘ЩЋЩ†Ш© Ш§Щ„ШўЩ†."
+msgid "Czech (QWERTZ)"
+msgstr "Ш§Щ„ШЄШґЩЉЩѓЩЉШ© (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш®Щ€Ш§ШЇЩ…..."
+msgid "Track network card id (useful for laptops)"
+msgstr "ШЄШЄШЁШ№ Щ‡Щ€ЩЉШ© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШґШЁЩѓШ© (Щ…ЩЃЩЉШЇ Щ„Щ„Ш¬Ш§ШіШЁШ§ШЄ Ш§Щ„ШЇЩЃШЄШ±ЩЉШ©)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "Ш§Щ‡Щ…Ш§Щ„"
+msgid "The port number should be an integer!"
+msgstr "ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш±Щ‚Щ… Ш§Щ„Щ…Щ†ЩЃШ° Ш±Щ‚Щ…Ш§Щ‹ ШµШ­ЩЉШ­Ш§Щ‹!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "reconfigure"
-msgstr "ШҐШ№ШЇШ§Ш© Ш§Щ„ШҐШ№ШЇШ§ШЇ"
+msgid "You must choose an image file first!"
+msgstr "ЩЉШ¬ШЁ Ш§Ш®ШЄЩЉШ§Ш± Щ…Щ„ЩЃ ШµЩ€Ш±Ш© ШЈЩ€Щ„Ш§Щ‹!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "enable"
-msgstr "ШЄЩ…ЩѓЩЉЩ†"
+msgid "Restore from Hard Disk."
+msgstr "Ш§ШіШЄШ№ШЇ Щ…Щ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ШЄЩ… ШЄЩ†ШµЩЉШЁ Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
-"Щ€ Щ‡ЩЉ Щ…Ш№Ш·Щ„Ш© Ш­Ш§Щ„ЩЉШ§Щ‹.\n"
-"\n"
-"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
+msgid "Add to LVM"
+msgstr "Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ‰ LVM"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "DNS server"
+msgstr "Ш®Ш§ШЇЩ… DNS"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§ШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШєЩЉШ± Щ…Щ…ЩѓЩ‘ЩЋЩ†Ш© Ш§Щ„ШўЩ†."
+msgid "Trinidad and Tobago"
+msgstr "ШЄШ±ЩЉЩ†ЩЉШ§ШЇ Щ€ ШЄЩ€ШЁШ§Ш¬Щ€"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШ№Ш·ЩЉЩ„ Ш§Щ„Ш®Щ€Ш§ШЇЩ…..."
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD Щ€ LPRng Щ„Ш§ ШЄШЇШ№Щ… Ш·Ш§ШЁШ№Ш§ШЄ IPP.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "disable"
-msgstr "ШЄШ№Ш·ЩЉЩ„"
+msgid "simple"
+msgstr "ШЁШіЩЉШ·"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"ШЄЩ… Ш№Щ…Щ„ Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
-"Щ€ Щ‡ЩЉ Щ…Щ…ЩѓЩ‘Щ†Ш© Ш­Ш§Щ„ЩЉШ§Щ‹.\n"
-"\n"
-"Щ…Ш§Ш°Ш§ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„Шџ"
+msgid "Clear all"
+msgstr "ШЈЩ…ШіШ­ Ш§Щ„ЩѓЩ„"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Щ…ЩѓЩ†Ш© Ш­Ш§Щ„ЩЉШ§"
+msgid "No test pages"
+msgstr "Щ„Ш§ ШµЩЃШ­Ш§ШЄ Ш§Ш®ШЄШЁШ§Ш±ЩЉШ©"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr "ШўШіЩЃЩ€Щ†, Щ†Ш­Щ† Щ†ШЇШ№Щ… Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„Щ†Щ€Ш§Ш© 2.4"
+msgid "Adapter %s: %s"
+msgstr "Ш§Щ„Щ…Ш­Щ€Щ‘Щ„ %s: %s"
 
-#: ../../standalone/drakhelp:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
-"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШЄШµЩЃШ­ Щ…Ш«ШЁШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШ«ШЁЩЉШЄ Щ…ШЄШµЩЃШ­ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ШєШЁ ЩЃЩЉ ШЄШµЩЃШ­ Щ†ШёШ§Щ… "
-"Ш§Щ„Щ…ШіШ§Ш№ШЇШ©"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Ш¬ШІШ± ЩЃЩ€ЩѓЩ„Ш§Щ†ШЇ"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Path"
-msgstr "Ш§Щ„Щ…ШіШ§Ш±"
+msgid "Unknown model"
+msgstr "Ш·Ш±Ш§ШІ ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "group :"
-msgstr "Щ…Ш¬Щ…Щ€Ш№Ш© :"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr "if set to yes, check files/directories writable by everybody."
 
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Ш§Щ„ШЄШ­Щ‚Щ‚"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "user :"
-msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ… :"
+msgid "Backup Now"
+msgstr "Щ‚Щ… ШЁШ§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ Ш§Щ„ШўЩ†"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Path selection"
-msgstr "ШҐШ®ШЄЩЉШ§Ш± Ш§Щ„Щ…ШіШ§Ш±"
+msgid "/_File"
+msgstr "/_Щ…Щ„ЩЃ"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "Ш№Щ†ШЇ Ш§Щ„ШЄШЈШґЩЉШ± Щ„Щ† ЩЉШЄЩ… ШЄШєЩЉЩЉШ± Ш§Щ„Щ…Ш§Щ„Щѓ Щ€ Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…Щ† Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Use group id for execution"
-msgstr "Ш§ШіШЄШ®ШЇЩ… group id Щ„Щ„ШЄЩ†ЩЃЩЉШ°"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Use owner id for execution"
-msgstr "Ш§ШіШЄШ®ШЇЩ… owner id Щ„Щ„ШЄЩ†ЩЃЩЉШ°"
+msgid "Tamil (ISCII-layout)"
+msgstr "Ш§Щ„ШЄШ§Щ…ЩЉЩ„ (ISCII)"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-"ЩЉЩЏШіШЄШ®ШЇЩ… Щ„Щ„ШЇЩ„ЩЉЩ„:\n"
-" ЩЉЩ…ЩѓЩ† ЩЃЩ‚Ш· Щ„Щ…Ш§Щ„Щѓ Щ‡Ш°Ш§ Ш§Щ„ШЇЩ„ЩЉЩ„ ШЈЩ€ Ш§Щ„Щ…Щ„ЩЃ Ш§Щ„ШєШ§Ш¤Щ‡"
+msgid "Mayotte"
+msgstr "Щ…Ш§ЩЉЩ€ШЄ"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Set-GID"
-msgstr "Set-GID"
+msgid "Creating auto install floppy..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„ШўЩ„ЩЉ..."
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Set-UID"
-msgstr "Set-UID"
+msgid "Searching for scanners ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©..."
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr "sticky-bit"
+msgid "Partitioning"
+msgstr "ШЄШ¬ШІШ¦Ш© Ш§Щ„ШЈЩ‚Ш±Ш§Шµ"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Property"
-msgstr "Ш§Щ„Ш®Ш§ШµЩЉШ©"
+msgid "Russia"
+msgstr "Ш±Щ€ШіЩЉШ§"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Permissions"
-msgstr "Ш§Щ„ШЄШµШ§Ш±ЩЉШ­"
+msgid "ethernet card(s) detected"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш©/ШЁШ·Ш§Щ‚Ш§ШЄ Ш§ЩЉШ«Ш±Щ†ШЄ"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Current user"
-msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш­Ш§Щ„ЩЉ"
+msgid "Syslog"
+msgstr "syslog"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "browse"
-msgstr "Ш§ШіШЄШ№Ш±Ш¶"
+msgid "Can't create catalog!"
+msgstr "ШЄШ№Ш°Ш± Ш§Щ†ШґШ§ШЎ Ш§Щ„ЩѓШЄШ§Щ„Щ€Шє!"
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Edit current rule"
-msgstr "Ш­Ш±Щ‘Ш± Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "edit"
-msgstr "Ш­Ш±Щ‘Ш±"
+msgid "Not enough free space for auto-allocating"
+msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…ШіШ§Ш­Ш© ЩѓШ§ЩЃЩЉШ© Щ„Щ„ШЄШ­ШЇЩЉШЇ Ш§Щ„ШўЩ„ЩЉ"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Delete selected rule"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
+msgid "Set root password"
+msgstr "Ш№ЩЉЩ‘Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Ш¬Ш°Ш±"
 
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "delete"
-msgstr "Ш­Ш°ЩЃ"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШґШєЩ„ Щ…ЩЃШЄЩ€Ш­ Ш§Щ„Щ…ШµШЇШ± Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ (%s), Щ„ЩѓЩ† Щ‡Щ†Ш§Щѓ Щ…ШґШєЩ„ ШЄШ¬Ш§Ш±ЩЉ ЩЃЩЉ \"%s\"."
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Add a new rule at the end"
-msgstr "ШЈШ¶ЩЃ Щ‚Ш§Ш№ШЇШ© Ш¬ШЇЩЉШЇШ© ЩЃЩЉ Ш§Щ„Щ†Щ‡Ш§ЩЉШ©"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "ШЁШ№ШЇ ШЄШєЩЉЩЉШ± Ш­Ш¬Щ… Ш§Щ„ШЄШ¬ШІШ¦Ш© %s, ЩЃШҐЩ† ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„ШЄШ¬ШІШ¦Ш© ШіШЄЩЃЩ‚ШЇ"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "add a rule"
-msgstr "Ш§Ш¶Ш§ЩЃШ© Щ‚Ш§Ш№ШЇШ©"
+msgid "Internet connection configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Move selected rule down one level"
-msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Щ„Щ‰ ШЄШ­ШЄ ШЁЩ…ШіШЄЩ€Щ‰ Щ€Ш§Ш­ШЇ"
+msgid "Scanning for TV channels"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш¶ШЁШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Down"
-msgstr "ШЄШ­ШЄ"
+msgid "Kernel:"
+msgstr "Ш§Щ„Щ†Щ€Ш§Ш©:"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Щ„Щ‰ ЩЃЩ€Щ‚ ШЁЩ…ШіШЄЩ€Щ‰ Щ€Ш§Ш­ШЇ"
+msgid "/_About..."
+msgstr "/_Ш­Щ€Щ„..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Up"
-msgstr "ЩЃЩ€Щ‚"
+msgid "Bengali"
+msgstr "Ш§Щ„ШЁЩ†ШєШ§Щ„ЩЉШ©"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr "Ш§Ш®ШЄШ± Щ…Щ„ЩЃ ШЄШµШ§Ш±ЩЉШ­ Щ„Ш±Ш¤ЩЉШЄЩ‡/ШЄШ­Ш±ЩЉШ±Щ‡"
+msgid "Preference: "
+msgstr "Ш§Щ„ШЄЩЃШ¶ЩЉЩ„: "
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
-"ЩЉЩЏШіШЄШ®ШЇЩ… Drakperm Щ„Ш§ШіШЄШ№Ш±Ш§Ш¶ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ШЄЩЉ ЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„ШЄШ№ШЇЩЉЩ„ Ш§Щ„ШµЩ„Ш§Ш­ЩЉШ§ШЄ, Щ€ "
-"Ш§Щ„Щ…Щ„Ш§Щѓ Щ€ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† ШЁШ§ШіШЄШ®ШЇШ§Щ… msec.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ЩѓШ°Щ„Щѓ ШЄШ­Ш±ЩЉШ± Щ‚Щ€Ш§Ш№ШЇЩѓ Ш§Щ„Ш®Ш§ШµШ© Ш§Щ„ШЄЩЉ ШіШЄЩЏЩѓШЄЩЋШЁ ЩЃЩ€Щ‚ Ш§Щ„Щ‚Щ€Ш§Щ‡ШЇ Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©."
+msgid "Wizard..."
+msgstr "Ш§Щ„Щ…Ш№Ш§Щ„Ш¬..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "permissions"
-msgstr "Ш§Щ„ШЄШµШ§Ш±ЩЉШ­"
+msgid "Services: %d activated for %d registered"
+msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ: %d Щ…Щ†ШґЩ‘Ш·Ш© Щ„ЩЂ %d Щ…ШіШ¬Щ„Ш©"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid "group"
-msgstr "Ш§Щ„Щ…Ш¬Щ…Щ€Ш№Ш©"
+msgid "Create a bootdisk"
+msgstr "ШЈЩ†ШґШ¦ Щ‚Ш±Шµ ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "user"
-msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Solomon Islands"
+msgstr "Ш¬ШІШ± ШіЩ„ЩЉЩ…Ш§Щ†"
 
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "path"
-msgstr "Ш§Щ„Щ…ШіШ§Ш±"
+msgid "(module %s)"
+msgstr "(Ш§Щ„Щ€Ш­ШЇШ© %s)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Ш§Щ„Щ…ЩѓШ§Щ† Ш№Щ„Щ‰ Щ…Щ„ЩЃ install.cfg"
+msgid "Workgroup"
+msgstr "Щ…Ш¬Щ…Щ€Ш№Ш© Ш§Щ„Ш№Щ…Щ„"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ Ш­ШЇШЇ Щ…ЩѓШ§Щ† Щ…Щ„ЩЃ auto_install.cfg.\n"
-"\n"
-"Ш§ШЄШ±Щѓ Ш§Щ„Ш­Щ‚Щ„ ЩЃШ§Ш±ШєШ§Щ‹ Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇ Щ€Ш¶Ш№ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш§Щ„ЩЉ.\n"
+msgid "Printer host name or IP"
+msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© ШЈЩ€ Ш§Щ„ЩЂ IP"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШµЩ€Ш±Ш© CD ШЈЩ€ DVD, ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ†ШіШ® ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉЩ† Щ€Щ…Щ„ЩЃШ§ШЄ rpm"
+msgid "Host Path or Module"
+msgstr "Щ€Ш­ШЇШ© ШЈЩ€ Щ…ШіШ§Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ"
 
-#
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No image found"
-msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШµЩ€Ш±Ш©"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© ЩЉШ¬ШЁ ШЈЩ† ЩЉШ­ШЄЩ€ЩЉ ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш­Ш±Щ€ЩЃ Щ€ ШЈШ±Щ‚Ш§Щ… Щ€ ШґШ§Ш±Ш·Ш§ШЄ ШЄШ­ШЄЩЉШ©"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Installation image directory"
-msgstr "ШЇЩ„ЩЉЩ„ ШµЩ€Ш±Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ"
+msgid "Show current interface configuration"
+msgstr "ШЈШёЩ‡Ш± ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш­Ш§Щ„ЩЉШ©"
 
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹ ШЈШ®ШЁШ± Ш№Щ† Щ…ЩѓШ§Щ† ШµЩ€Ш±Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ.\n"
-"\n"
-"Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Щ‡Щ†Ш§Щѓ ШЇЩ„ЩЉЩ„ Щ…Щ€Ш¬Щ€ШЇ, ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ†ШіШ® Щ…Ш­ШЄЩ€ЩЉШ§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЈЩ€ Щ‚Ш±Шµ DVD.\n"
-"\n"
+msgid "Development"
+msgstr "ШЄШ·Щ€ЩЉШ±"
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "The DHCP end ip"
-msgstr "DHCP end ip"
+msgid "Done"
+msgstr "Ш§Щ†ШЄЩ‡Щ‰"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "The DHCP start ip"
-msgstr "DHCP start ip"
+msgid "Web Server"
+msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-"ШіЩЉШіЩ…Ш­ Ш®Ш§ШЇЩ… DHCP Щ„Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰ ШЁШ§Щ„ШҐЩ‚Щ„Ш§Ш№ ШЁШ§ШіШЄШ®ШЇШ§Щ… PXE ЩЃЩЉ Ш­ШЇЩ€ШЇ Ш§Щ„Ш№Щ†Ш§Щ€ЩЉЩ† "
-"Ш§Щ„Щ…Ш№Ш·Ш§Ш©.\n"
-"\n"
-"Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШґШЁЩѓШ© %s ЩЉШіШЄШ®ШЇЩ… netmask %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
+msgstr "\tЩ„Ш§ ШЄЩЏШ¶Щ…Щ† Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…\n"
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© %s (Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© %s)"
+msgid "Chile"
+msgstr "ШЄШґЩЉЩ„ЩЉ"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "Ш§Ш®ШЄШ± Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„ШґШЁЩѓШ© Ш§Щ„ШЄЩЉ ШіЩЉШЄЩ… Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§ Щ„Ш®Ш§ШЇЩ… DHCP."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
+msgstr ""
+"Щ…ШґШєЩ„Ш§ШЄ Ш·Ш§ШЁШ№ШЄЩѓ inkjet Ш§Щ„ШЄЩЉ ШЄЩ… ШЄЩ€ЩЃЩЉШ±Щ‡Ш§ Щ…Щ† Lexmark ШЄШЇШ№Щ… Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ЩЃЩ‚Ш·, "
+"Щ„Ш§ ЩЉШЇШ№Щ… Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ШЈЩ€ Ш®Ш§ШЇЩ…Ш§ШЄ Ш§Щ„Ш·ШЁШ§Ш№Ш©. ЩЃШ¶Щ„Ш§Щ‹ Щ€ШµЩ„ "
+"Ш·Ш§ШЁШ№ШЄЩѓ Ш§Щ„Щ‰ Щ…Щ†ЩЃШ° Щ…Ш­Щ„ЩЉ ШЈЩ€ Щ‚Щ… ШЁШЄЩ‡ЩЉШ¦ШЄЩ‡Ш§ Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Ш§Щ„Щ…Ш±ШЄШЁШ·Ш© ШЁЩ‡Ш§."
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
-"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш¬Щ‡Ш§ШІЩѓ Щ„ШЄШ«ШЁЩЉШЄ Ш®Ш§ШЇЩ… PXE ЩѓШ®Ш§ШЇЩ… DHCP\n"
-"Щ€ Ш®Ш§ШЇЩ… TFTP Щ„ШЁЩ†Ш§ШЎ Ш®Ш§ШЇЩ… ШЄШ«ШЁЩЉШЄ.\n"
-"ШЁШ§ШіШЄШ®ШЇШ§Щ… Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ© ШЄЩѓЩ€Щ† Ш§Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© Щ‚Ш§ШЁЩ„Ш© Щ„Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† "
-"Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ.\n"
-"\n"
-"ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ†Щѓ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©/Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… drakconnect Щ‚ШЁЩ„ Ш§Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
+"Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ…ШЄШ№ШЇШЇ Ш§Щ„Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ ШЄЩ… ШЄЩ‡ЩЉШ¦ШЄЩ‡ ШўЩ„ЩЉШ§Щ‹ Щ„ЩЉШЄЩ…ЩѓЩ† Щ…Щ† Ш§Щ„Щ…ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ. ЩЉЩ…ЩѓЩ†Щѓ "
+"Ш§Щ„ШўЩ† Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…ШіШ® Ш§Щ„Ш¶Щ€Ш¦ЩЉ ШЁШ§ШіШЄШ®ШЇШ§Щ… \"scanimage\" (\"scanimage -d hp:%s\" "
+"Щ„ШЄШ­ШЇЩЉШЇ Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ Ш§Ш°Ш§ ЩѓШ§Щ† Щ„ШЇЩЉЩѓ ШЈЩѓШ«Ш± Щ…Щ† Щ€Ш§Ш­ШЇ) Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± ШЈЩ€ ШЁШ§Щ„ШЁШ±Ш§Щ…Ш¬ "
+"Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ© \"xscanimage\" ШЈЩ€ \"xsane\". Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… GIMP, ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ Ш§Щ„Щ…ШіШ­ "
+"Ш§Щ„Ш¶Щ€Ш¦ЩЉ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ‚Щ€Ш§Ш¦Щ… \"File\"/\"Acquire\". ШґШєЩ„ Ш§Щ„ШЈЩ…Ш± \"man scanimage\" ЩЃЩЉ "
+"ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± Щ„Щ„Ш­ШµЩ€Щ„ Ш№Щ„Щ‰ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ.\n"
 "\n"
-"Щ…Щ„Ш­Щ€ШёШ©: ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…Щ€Ш§Ш¦Щ… ШґШЁЩѓШ© Щ…Ш®ШµШµ Щ„ШҐШ№ШЇШ§ШЇ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© (LAN)."
+"Щ„Ш§ ШЄШіШЄШ®ШЇЩ… \"scannerdrake\" Щ„Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ!"
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installation Server Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш§Щ„Ш«ШЁЩЉШЄ"
+msgid "(already added %s)"
+msgstr "(ШЄЩ… Ш§Ш¶Ш§ЩЃШ© %s Щ…ШіШЁЩ‚Ш§)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "PXE Server Configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… PXE"
+msgid ", using command %s"
+msgstr ", ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± %s"
 
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please wait, setting security options..."
-msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЈЩ…Щ†..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Щ…ЩЃШ§ШЄЩЉШ­ Alt Щ€ Shift ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please wait, setting security level..."
-msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ ШЄШ№ЩЉЩЉЩ† Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†.."
+msgid "Flags"
+msgstr "Flags"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Periodic Checks"
-msgstr "ШЄШЈЩѓШЇ ШЇЩ€Ш±ЩЉ"
+msgid "Add/Del Users"
+msgstr "ШЈШ¶ЩЃ/Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "System Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
+msgid "Host/network IP address missing."
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Щ…ЩЃЩ‚Щ€ШЇ."
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network Options"
-msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ ШґШЁЩѓШ©"
+msgid "weekly"
+msgstr "ШЈШіШЁЩ€Ш№ЩЉЩ‘Ш§"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "Ш§Щ„Ш¶ШЁШ·"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Щ…ШЇЩЏШ®Щ„ Щ„Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© ШєЩЉШ± ШµШ­ЩЉШ­.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Щ‡Ш§ Щ‡ЩЉ Щ‚Ш§Ш¦Щ…Ш© ЩѓШ§Щ…Щ„Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„ШЁЩ„Ш§ШЇ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "ШµЩЃШ­Ш© Ш§Ш®ШЄШЁШ§Ш±ЩЉШ© ШЁШЇЩЉЩ„Ш© (A4)"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
-"ЩЉЩ…ЩѓЩ† ШЄШ№ЩЉЩЉЩ† Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄШ§Щ„ЩЉШ© Щ„ШЄШ®ШµЩЉШµ\n"
-"ШЈЩ…Щ† Ш§Щ„Щ†ШёШ§Щ…. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„ШґШ±Ш­, Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш№ШЇШ©.\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ‚Щ„ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© ШЈШЇЩ†Ш§Щ‡, Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚.\n"
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩ…ЩѓЩ† Щ„ШЇЩЉЩѓ ШЈЩЉ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ, Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ.\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШЁШ№Ш¶ Щ‡Ш°Щ‡ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Щ…ЩЃЩ‚Щ€ШЇШ©, Щ‚Щ… ШЁШ§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§Ш«Щ… Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚."
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Security Administrator:"
-msgstr "Щ…ШЇЩЉШ± Ш§Щ„ШЈЩ…Щ†:"
+msgid "Wait please"
+msgstr "Ш§Щ„Ш§Щ†ШЄШёШ§Ш± Щ…Щ† ЩЃШ¶Щ„Щѓ"
 
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Security Alerts:"
-msgstr "ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ ШЈЩ…Щ†ЩЉШ©:"
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Security Level:"
-msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†:"
+msgid "Backup user files"
+msgstr "Ш§Щ†ШіШ® Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "(default value: %s)"
-msgstr "(Ш§Щ„Щ‚ЩЉЩ…Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©: %s)"
+msgid "New"
+msgstr "Ш¬ШЇЩЉШЇ"
 
-#: ../../standalone/draksec:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-"Щ‚ЩЉШ§ШіЩЉ: Щ‡Ш°Ш§ Щ‡Щ€ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„Щ‚ЩЉШ§ШіЩЉ Ш§Щ„Щ…Щ†ШµЩ€Ш­ ШЁЩ‡ Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± ЩЉЩ‚Щ€Щ… ШЁШ§Щ„ШҐШЄШµШ§Щ„\n"
-"               ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩѓШ№Щ…ЩЉЩ„.\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Щ…Ш±ШЄЩЃШ№:       ШЄЩ€Ш¬ШЇ ШЁШ№Ш¶ Ш§Щ„Щ‚ЩЉЩ€ШЇ Щ…ШіШЁЩ‚Ш§Щ‹, Щ€ ШЁШ№Ш¶ Ш§Щ„ШҐШ®ШЄШЁШ§Ш±Ш§ШЄ ЩЉШЄЩ… ШЄШґШєЩЉЩ„Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹ Ш№Щ†ШЇ ЩѓЩ„ "
-"Щ„ЩЉЩ„Ш©.\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
-"Щ…Ш±ШЄЩ‚Ш№ ШЈЩѓШ«Ш±:    Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ШЁШґЩѓЩ„ ЩѓШ§ЩЃЩЌ Щ„Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ†ШёШ§Щ… ЩѓШ®Ш§ШЇЩ… ЩЉШіШЄШ·ЩЉШ№ ШЈЩ† "
-"ЩЉЩ‚ШЁЩ„\n"
-"              Ш§Щ„ШҐШЄШµШ§Щ„Ш§ШЄ Щ…Щ† Ш№Щ…Щ„Ш§ШЎ ЩѓШ«ЩЉШ±ЩЉЩ†. Ш§Ш°Ш§ ЩѓШ§Щ† Ш­Ш§ШіШЁЩѓ Щ…Ш¬Ш±ШЇ Ш№Щ…ЩЉЩ„ Ш№Щ„Щ‰ "
-"Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ\n"
-"\t      ЩЃЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШіШЄЩ€Щ‰ ШЈЩ‚Щ„.\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
-"Щ…Ш±ШЄЩ‚Ш№ Ш¬ШЇШ§Щ‹: Щ‡Ш°Ш§ ЩЉЩ…Ш§Ш«Щ„ Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШіШ§ШЁЩ‚, Щ„ЩѓЩ† Ш§Щ„Щ†ШёШ§Щ… ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ ЩЉЩѓЩ€Щ† Щ…ШєЩ„Щ‚Ш§Щ‹ Щ€ "
-"Ш§Щ„Щ…ШІШ§ЩЉШ§\n"
-"                Ш§Щ„ШЈЩ…Щ†ЩЉШ© ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ ШЈЩ‚ШµЩ‰ Ш­ШЇ\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Щ…ШЇЩЉШ± Ш§Щ„ШЈЩ…Щ†:\n"
-"               Ш§Ш°Ш§ ЩѓШ§Щ† Ш®ЩЉШ§Ш± 'Ш§Щ„ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ Ш§Щ„ШЈЩ…Щ†ЩЉШ©' Щ…Ш®ШЄШ§Ш±Ш§Щ‹, ЩЃШіЩЉШЄЩ… Ш§Ш±ШіШ§Щ„ ШЄЩ†ШЁЩЉЩ‡Ш§ШЄ "
-"ШЈЩ…Щ†ЩЉШ© Ш§Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… (ШЁШҐШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…\n"
-"\t       ШЈЩ€ Ш§Щ„ШЁШ±ЩЉШЇ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ)"
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
+msgstr ""
+"Щ‡Ш°Щ‡ Щ‡ЩЉ ШЈЩ‡Щ… Ш®Ш·Щ€Ш© ШЄШЄШ®Ш°Щ‡Ш§ ?Щ…Щ† Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі Ш§Щ„Ш®Ш§Шµ\n"
+"ШЁЩѓ: Ш№Щ„ЩЉЩѓ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш§Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\" (root) Щ€ Щ‡Щ€\n"
+"Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ… Щ€ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Ш§Щ„Щ€Ш­ЩЉШЇ Ш§Щ„Щ…Ш®Щ€Щ„ ШЁШЄШ­ШЇЩЉШ« Ш§Щ„Щ†ШёШ§Щ…, Ш§Ш¶Ш§ЩЃШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…ЩЉЩ†,\n"
+"ШЄШєЩЉЩЉШ± ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ†ШёШ§Щ…, Ш§Щ„Ш®. ШЁШ§Ш®ШЄШµШ§Ш± ЩЉЩ…ЩѓЩ† Щ„Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\" ШЈЩ† ЩЉЩЃШ№Щ„\n"
+"ЩѓЩ„ ШґШ¦! Щ„Ш°Ш§ Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ШµШ№ШЁШ©\n"
+"Ш§Щ„ШЄШ®Щ…ЩЉЩ† - ШіЩЉШ®ШЁШ±Щѓ DrakX Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш§Щ„ШЄЩЉ ШЄШіШЄШ®ШЇЩ…Щ‡Ш§ ШіЩ‡Щ„Ш©. ЩѓЩ…Ш§\n"
+"ШЄШ±Щ‰, Щ„ШіШЄ Щ…Ш¬ШЁШ±Ш§Щ‹ Ш№Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±, Щ„ЩѓЩ†Щ†Ш§ Щ†Щ†ШµШ­ ШЁШґШЇШ© ?Щ† Ш§Ш­ШЄЩ…Ш§Щ„ Ш­ШЇЩ€Ш«\n"
+"ШЈШ®Ш·Ш§ШЎ Щ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш№Ш§ШЇЩЉ Щ…Ш«Щ„ ШЁШ§Щ‚ЩЉ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰. Щ€ ШЁЩ…Ш§ ШЈЩ† \"Ш§Щ„Ш¬Ш°Ш±\" ЩЉЩ…ЩѓЩ†Щ‡\n"
+"ШЄШ№ШЇЩЉ ЩѓЩ„ Ш§Щ„Ш­ШЇЩ€ШЇ Щ€ Щ‚ШЇ ЩЉШ­Ш°ЩЃ ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Щ…Щ† ШЇЩ€Щ† Щ‚ШµШЇ, Щ„Ш°Ш§ ЩЃЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…Щ†\n"
+"Ш§Щ„ШµШ№ШЁ ШЈЩ† ШЄШµШЁШ­ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… \"Ш§Щ„Ш¬Ш°Ш±\".\n"
 "\n"
+"ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш®Щ„ЩЉШ·Ш§Щ‹ Щ…Щ† Ш§Щ„Ш­Ш±Щ€ЩЃ Щ€ Ш§?Ш±Щ‚Ш§Щ… ЩѓЩ…Ш§ ЩЉШ¬ШЁ ШЈЩ† ШЄШ­ШЄЩ€ЩЉ\n"
+"Ш№Щ„Щ‰ 8 Ш­Ш±Щ€ЩЃ Ш№Щ„Щ‰ Ш§?Щ‚Щ„. ? ШЄЩѓШЄШЁ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± \"Ш§Щ„Ш¬Ш°Ш±\" Ш№Щ„Щ‰ Щ€Ш±Щ‚ -- Щ‡Ш°Ш§ ЩЉШіЩ‡Щ‘Щ„\n"
+"Ш§Ш®ШЄШ±Ш§Щ‚ Ш§Щ„Щ†ШёШ§Щ… Ш§Ш°Ш§ Ш±ШЈЩ‰ ШЈШ­ШЇ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±.\n"
 "\n"
+"Щ†ШµЩЉШ­Ш© ШЈШ®Ш±Щ‰ -- ? ШЄШ¬Ш№Щ„ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш·Щ€ЩЉЩ„Ш© Ш¬ШЇШ§Щ‹ ШЈЩ€ Щ…Ш№Щ‚Щ‘ШЇШ© ?Щ†Щѓ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ†\n"
+"Щ‚Ш§ШЇШ±Ш§Щ‹ Ш№Щ„Щ‰ ШЄШ°ЩѓШ±Щ‡Ш§!\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
-msgstr ""
+"Щ„Щ† ЩЉШЄЩ… Ш№Ш±Ш¶ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ©. Щ„ШЄЩ‚Щ„ЩЉЩ„ ЩЃШ±ШµШ© Ш­ШЇЩ€Ш«\n"
+"Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш§Щ„ЩѓШЄШ§ШЁШ©, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШЇШ®Ш§Щ„ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Щ…Ш±ШЄЩЉЩ†.\n"
+"Ш§Ш°Ш§ ШЈШ®Ш·ШЈШЄ ЩЃЩЉ Ш§Щ„ЩѓШЄШ§ШЁШ© ЩЃЩЉ Ш§Щ„Щ…Ш±ШЄЩЉЩ†, ЩЃШіЩЉШ¬ШЁ Ш§ШіШЄШ®ШЇШ§Щ… ЩѓЩ„Щ…Ш©\n"
+"Ш§Щ„Щ…Ш±Щ€Ш± \"Ш§Щ„Ш®Ш§Ш·Ш¦Ш©\" ЩЃЩЉ Ш§Щ„Щ…Ш±Ш© Ш§?Щ€Щ„Щ‰ Ш§Щ„ШЄЩЉ ШЄШЇШ®Щ„ ЩЃЩЉЩ‡Ш§ Ш§Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ….\n"
 "\n"
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ„ЩѓЩЉ ЩЉШЄЩ… Ш§Щ„ШЄШ­ЩѓЩ… ШЁЩѓ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+"Ш®Ш§ШЇЩ… Щ…ШµШ§ШЇЩ‚Ш©, Ш§Ш¶ШєШ· ШІШ± \"%s\".\n"
 "\n"
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ ШґШЁЩѓШЄЩѓ ШЄШіШЄШ®ШЇЩ… LDAP, NIS, ШЈЩ€ PDC Windows Domain Authentication "
+"Services\n"
+"Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш®ЩЉШ§Ш± Ш§Щ„Щ…Щ†Ш§ШіШЁ ЩѓЩЂ\"Щ…ШµШ§ШЇЩ‚Ш©\". Ш§Ш°Ш§ Щ„Щ… ШЄШ№Щ„Щ… ШЈЩЉ Щ…Щ†Щ‡Ш§ ШЄШ±ЩЉШЇ\n"
+"Ш§ШіШЄШ®ШЇШ§Щ…Щ‡, Ш§ШіШЈЩ„ Щ…ШЇЩЉШ± Ш§Щ„ШґШЁЩѓШ© Щ„ШЇЩЉЩѓ.\n"
 "\n"
-"Щ…Щ„Ш­Щ€ШёШ©: Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ ISA PnP, ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Ш§ШіШЄШ®ШЇШ§Щ… ШЁШ±Щ†Ш§Щ…Ш¬ "
-"sndconfig. ЩЃЩ‚Ш· Ш№Щ„ЩЉЩѓ ЩѓШЄШ§ШЁШ© \"sndconfig\" ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
+"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ Щ…ШґЩѓЩ„Ш© ЩЃЩЉ ШЄШ°ЩѓШ± ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш±, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±\n"
+"\"? ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±\" Ш§Ш°Ш§ Щ„Щ… ЩЉЩѓЩ† Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ± Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ…ШЄШµЩ„Ш§Щ‹ ШЁШ§?Щ†ШЄШ±Щ†ШЄ,\n"
+"ШЈЩ€ ШЈЩ†Щѓ ШЄШ«Щ‚ ЩЃЩЉ Ш§Щ„Щ„Ш°ЩЉЩ† ЩЉШЇШ®Щ„Щ€Щ† Ш§Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ…."
 
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
-"ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш© Щ…Щ† "
-"Щ„ЩЉЩ†ЩѓШі Щ…Щ€ШµЩ€Щ„Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.\n"
-"\n"
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШІЩЉШ§Ш±Ш© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ШЇШ№Щ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Ш§ Ш№Щ„Щ‰:\n"
-"\n"
+"Ш№Щ†ШЇ Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш·Ш©, ШіЩЉШіЩ…Ш­ Щ„Щѓ DrakX ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш§Щ„Ш°ЩЉ ШЄШ±ШєШЁ ШЁЩ‡\n"
+"Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©. ШЁШЇЩЉЩ‡ЩЉШ§Щ‹, ЩЉШ¬ШЁ ШЄШ№ЩЉЩЉЩ† Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ\n"
+"Ш№Ш§Щ„ЩЌ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Щ‡Ш§Щ…Ш©, ШЈЩ€ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©\n"
+"ШіШЄЩЏШіШЄШ®ШЇЩ… Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ. Ш§Щ† Ш§ШіШЄШ®ШЇШ§Щ… Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ЩЉШЈШЄЩЉ\n"
+"Ш№Ш§ШЇШ© Ш№Щ„Щ‰ Ш­ШіШ§ШЁ ШіЩ‡Щ€Щ„Ш© Ш§Щ„ШҐШіШЄШ®ШЇШ§Щ….\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Щ„ШҐШ®ШЄЩЉШ§Ш±, Ш§Ш­ЩЃШё Ш§Щ„Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ."
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No Sound Card detected!"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ"
+msgid "Load from floppy"
+msgstr "Ш­Щ…Щ‘Щ„ Щ…Щ† Щ‚Ш±Шµ Щ…Ш±Щ†"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr "%s BootSplash (%s) Щ…Ш№Ш§ЩЉЩ†Ш©"
+msgid "The following printer was auto-detected. "
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШўШЄЩЉШ© ШўЩ„ЩЉШ§Щ‹. "
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Generating preview ..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄЩ€Щ„ЩЉШЇ Ш§Щ„Щ…Ш№Ш§ЩЉЩ†Ш© ..."
+msgid "Boot Floppy"
+msgstr "Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You must choose an image file first!"
-msgstr "ЩЉШ¬ШЁ Ш§Ш®ШЄЩЉШ§Ш± Щ…Щ„ЩЃ ШµЩ€Ш±Ш© ШЈЩ€Щ„Ш§Щ‹!"
+msgid "Norwegian"
+msgstr "Ш§Щ„Щ†Ш±Щ€ЩЉШ¬ЩЉШ©"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "ProgressBar color selection"
-msgstr "ШҐШ®ШЄЩЉШ§Ш± Щ„Щ€Щ† ШґШ±ЩЉШ· Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
+msgid "Searching for new scanners ..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Ш¬ШЇЩЉШЇШ©..."
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„ШіЩ…Ш© Щ„ЩЉШі Щ„Щ‡Ш§ bootsplash ЩЃЩЉ %s !"
+msgid "Apache World Wide Web Server"
+msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ Apache"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш­ЩЃШё ШіЩ…Ш© Bootsplash..."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr "Stepping of the cpu (sub model (generation) number)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "choose image file"
-msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ ШµЩ€Ш±Ш©"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "ШҐШ®ШЄШ± Щ…Щ„ЩЃ ШµЩ€Ш±Ш©"
+msgid "select path to restore (instead of /)"
+msgstr "Ш§Ш®ШЄШ± Щ…ШіШ§Ш± Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© (ШЁШЇЩ„Ш§Щ‹ Щ…Щ† / )"
 
 #: ../../standalone/draksplash:1
 #, c-format
 msgid "Configure bootsplash picture"
 msgstr "ШЄЩ‡ЩЉШ¦Ш© ШµЩ€Ш±Ш© Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr "Ш§Ш¬Ш№Щ„ Ш±ШіШ§Ш¦Щ„ Ш§Щ„Щ†Щ€Ш§Ш© ШµШ§Щ…ШЄШ© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹"
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr "Ш§Ш№Ш±Ш¶ Ш§Щ„ШґШ№Ш§Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±"
+msgid "China"
+msgstr "Ш§Щ„ШµЩЉЩ†"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose color"
-msgstr "ШҐШ®ШЄШ± Ш§Щ„Щ„Щ€Щ†"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ЩѓЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ…Щ€ШµЩ€Щ„Ш© Щ€ ШЄШ№Щ…Щ„).\n"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Save theme"
-msgstr "Ш§Ш­ЩЃШё Ш§Щ„ШіЩ…Ш©"
+msgid "Georgia"
+msgstr "Ш¬Щ€Ш±Ш¬ЩЉШ§"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, c-format
-msgid "Preview"
-msgstr "Щ…Ш№Ш§ЩЉЩ†Ш©"
+msgid "Reading data of installed printers..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш«ШЁШЄШ©..."
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr "Щ„Щ€Щ† ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid " Erase Now "
+msgstr " Ш§Щ…Ш­Щђ Ш§Щ„ШўЩ† "
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr "Ш§Ш±ШЄЩЃШ§Ш№ ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid "server"
+msgstr "Ш®Ш§ШЇЩ…"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr "Ш№Ш±Ш¶ ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "ШЈШЇШ®Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† Щ…Ш¬Щ‡ШІ Ш№Щ„Щ‰ Щ†ШёШ§Щ… Щ…Щ„ЩЃШ§ШЄ FAT ЩЃЩЉ Ш§Щ„ШіЩ€Ш§Щ‚Ш© %s"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШµШ§ШЇЩЉ Щ„Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„ШЈШ№Щ„Щ‰\n"
-"Щ„ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr "Щ†Ш№Щ… ШЄШ№Щ†ЩЉ ШЈЩ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Щ„ШЇЩЉЩ‡ Щ…Ш№Ш§Щ„Ш¬ Щ…ШіШ§Ш№ШЇ Щ„Щ„Ш№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Ш­ШіШ§ШЁЩЉШ©"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШіЩЉЩ†ЩЉ Щ„Щ„Ш±ЩѓЩ† Ш§Щ„ШЈЩЉШіШ± Ш§Щ„ШЈШ№Щ„Щ‰\n"
-"Щ„ШґШ±ЩЉШ· Ш§Щ„ШЄЩ‚ШЇЩ…"
+msgid "Please Wait... Applying the configuration"
+msgstr "ЩЉШ±Ш¬Щ‰ Ш§Щ„ШҐЩ†ШЄШёШ§Ш±... Ш¬Ш§Ш±ЩЉ ШЄШ·ШЁЩЉЩ‚ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
 
-#: ../../standalone/draksplash:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text box height"
-msgstr "Ш§Ш±ШЄЩЃШ§Ш№ Ш§Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text width"
-msgstr "Ш№Ш±Ш¶ Ш§Щ„Щ†Шµ"
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШµШ§ШЇЩЉ Щ„Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ\n"
-"ШЁШ№ШЇШЇ Ш§Щ„Ш­Ш±Щ€ЩЃ"
+msgid "SCSI controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ SCSI"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"Ш§Щ„ШҐШ­ШЇШ§Ш«ЩЉ Ш§Щ„ШіЩЉЩ†ЩЉ Щ„Щ„ШµЩ†ШЇЩ€Щ‚ Ш§Щ„Щ†ШµЩЉ\n"
-"ШЁШ№ШЇШЇ Ш§Щ„Ш­Ш±Щ€ЩЃ"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr "Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… LPD \"%s\", Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "Browse"
-msgstr "Ш§ШіШЄШ№Ш±Ш¶"
+msgid "Choosing a display manager"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШЇЩЉШ± Ш§Щ„Ш№Ш±Ш¶"
 
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Theme name"
-msgstr "Ш§ШіЩ… Ш§Щ„ШіЩ…Ш©"
+msgid "Zeroconf Host name"
+msgstr "Ш§ШіЩ… Щ…ШіШЄШ¶ЩЉЩЃ Zeroconf"
 
-#: ../../standalone/draksplash:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "final resolution"
-msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Ш§Щ„Щ†Щ‡Ш§Ш¦ЩЉШ©"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "Ш№Щ†Щ€Ш§Щ† IP ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "first step creation"
-msgstr "Ш§Щ†ШґШ§ШЎ Ш§Щ„Ш®Ш·Щ€Ш© Ш§Щ„ШЈЩ€Щ„Щ‰"
+msgid "Ecuador"
+msgstr "Ш§Щ„ШҐЩѓЩ€Ш§ШЇЩ€Ш±"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
-"Ш­ШІЩ…Ш© 'ImageMagick' Ш¶Ш±Щ€Ш±ЩЉШ© Щ„ЩѓЩЉ ЩЉШЄЩ… Ш§ЩѓЩ…Ш§Щ„ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©.\n"
-"Ш§Ш¶ШєШ· \"Щ…Щ€Ш§ЩЃЩ‚\" Щ„ШЄШ«ШЁЩЉШЄ 'ImageMagick' ШЈЩ€ \"Ш§Щ„ШєШ§ШЎ\" Щ„Щ„Ш®Ш±Щ€Ш¬"
+msgid "Add an item"
+msgstr "ШЈШ¶ЩЃ Щ…Ш§ШЇШ©"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
-"Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ. ЩЃШ¶Щ„Ш§Щ‹ ШЄШЈЩѓШЇ Щ…Щ† ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ЩЃЩЉШЇЩЉЩ€/Ш§Щ„ШЄЩ„ЩЃШ§ШІ "
-"Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш© ЩЃЩЉ Щ„ЩЉЩ†ЩѓШі Щ…Щ€ШµЩ€Щ„Ш© ШЁШґЩѓЩ„ ШµШ­ЩЉШ­.\n"
-"\n"
-"\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШІЩЉШ§Ш±Ш© Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ШЇШ№Щ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩ†Ш§ Ш№Щ„Щ‰:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "The printers on this machine are available to other computers"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„ШЈШ®Ш±Щ‰"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ!"
+msgid "I can't find needed image file `%s'."
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§ЩЉШ¬Ш§ШЇ Щ…Щ„ЩЃ Ш§Щ„ШµЩ€Ш±Ш© `%s'."
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr "Ш§Щ„ШўЩ† ЩЉЩ…ЩѓЩ†Щѓ ШЄШґШєЩЉЩ„ XawTV (ЩЃЩЉ Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ©!) !\n"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Щ„Щ… ЩЉШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ. Ш­Ш§Щ€Щ„ ШЄШґШєЩЉЩ„ \"harddrake\" ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Have a nice day!"
-msgstr "Щ†ШЄЩ…Щ†Щ‰ Щ„Щѓ ЩЉЩ€Щ…Ш§Щ‹ ШіШ№ЩЉШЇШ§Щ‹!"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
+msgstr ""
+"ШЄЩ… Ш§Ш№Ш·Ш§ШЎ Щ…Щ†ЩЃШ° ШєЩЉШ± ШµШ§Щ„Ш­: %s.\n"
+"Ш§Щ„Щ†ШіЩ‚ Ш§Щ„ШµШ­ЩЉШ­ Щ‡Щ€ \"port/tcp\" ШЈЩ€ \"port/udp\", \n"
+"ЩЃЩЉ Ш­ЩЉЩ† ЩЉЩѓЩ€Щ† Ш§Щ„Щ…Щ†ЩЃШ° (port) ШЁЩЉЩ† 1 Щ€ 65535."
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "XawTV isn't installed!"
-msgstr "XawTV ШєЩЉШ± Щ…Ш«ШЁШЄ!"
+msgid "Shell"
+msgstr "Ш§Щ„ШєЩ„Ш§ЩЃ"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "ЩѓШ§Щ† Щ‡Щ†Ш§Щѓ Ш®Ш·ШЈ ШЈШ«Щ†Ш§ШЎ Ш¶ШЁШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning for TV channels"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш¶ШЁШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ"
+msgid "Sao Tome and Principe"
+msgstr "ШіШ§Щ€ ШЄЩ€Щ…ЩЉ Щ€ Ш§Щ„ШЁШ±ЩЉЩ†ШіЩЉШЁ"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr "Ш¶ЩЉШ· Щ‚Щ†Щ€Ш§ШЄ Ш§Щ„ШЄЩ„ЩЃШ§ШІ ЩЃЩЉ ШЄЩ‚ШЇЩ… ..."
+msgid "Can't login using username %s (bad password?)"
+msgstr "ШЄШ№Ш°Ш± Ш§Щ„ШЇШ®Щ€Щ„ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ… %s (ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± ШіЩЉШ¦Ш©Шџ)"
 
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Area:"
-msgstr "Ш§Щ„Щ…Щ†Ш·Щ‚Ш© :"
+msgid "Azerbaidjani (latin)"
+msgstr "Ш§Щ„ШЈШ°Ш±ШЁЩЉШ¬Ш§Щ†ЩЉШ© (Щ„Ш§ШЄЩЉЩ†ЩЉ)"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "TV norm:"
-msgstr "TV norm :"
+msgid "Package not installed"
+msgstr "Щ„Щ… ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш­ШІЩ…Ш©"
 
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
-"ЩЃШ¶Щ„Ш§Щ‹,\n"
-"Ш§Ш·ШЁШ№ tv norm Ш§Щ„Ш®Ш§Шµ ШЁЩѓ Щ€ ШЁЩ„ШЇЩѓ"
+msgid "Become a MandrakeExpert"
+msgstr "ЩѓЩ† Ш®ШЁЩЉШ±Ш§Щ‹ ЩЃЩЉ MandrakeExpert"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
-msgstr "Australian Optus cable TV"
+msgid "American Samoa"
+msgstr "ШіШ§Щ…Щ€Ш§ Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉШ©"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Newzealand"
-msgstr "Щ†ЩЉЩ€ШІЩЉЩ„Щ†ШЇШ§ "
+msgid "Protocol"
+msgstr "Ш§Щ„ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "France [SECAM]"
-msgstr "ЩЃШ±Щ†ШіШ§ [ШіЩЉЩѓШ§Щ…]"
+msgid "Copy fonts on your system"
+msgstr "Ш§Щ†ШіШ® Ш§Щ„Ш®Ш·Щ€Ш· Ш§Щ„Щ‰ Щ†ШёШ§Щ…Щѓ"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "East Europe"
-msgstr "ШЈЩ€Ш±Щ€ШЁЩ‘Ш§ Ш§Щ„ШґЩ‘Ш±Щ‚ЩЉЩ‘Ш©"
+msgid "Harddrake help"
+msgstr "Щ…ШіШ§Ш№ШЇШ© Harddrake"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "West Europe"
-msgstr "ШЈЩ€Ш±Щ€ШЁЩ‘Ш§ Ш§Щ„ШєШ±ШЁЩЉЩ‘Ш©"
+msgid "Bogomips"
+msgstr "Bogomips"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "China (broadcast)"
-msgstr "Ш§Щ„ШµЩЉЩ† (broadcast)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш·Ш±ЩЃЩЉШ§ШЄ Mandrake"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (cable)"
-msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ† (cable)"
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+"                    ШЄЩЃШ§ШµЩЉЩ„ ШЄЩ‚Ш±ЩЉШ± DrakBackup\n"
+"\n"
+"\n"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr "Ш§Щ„ЩЉШ§ШЁШ§Щ† (broadcast)"
+msgid "Restore all backups"
+msgstr "Ш§ШіШЄШ№ШЇ ЩѓЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
 
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Canada (cable)"
-msgstr "ЩѓЩ†ШЇШ© (cable)"
+msgid "if set to yes, check open ports."
+msgstr "if set to yes, check open ports."
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш©  (cable-hrc)"
+msgid "This may take a moment to erase the media."
+msgstr "Щ‚ШЇ ЩЉШіШЄШєШ±Щ‚ Щ…ШіШ­ Ш§Щ„Щ€ШіЩЉШ· ШЁШ№Ш¶ Ш§Щ„Щ€Щ‚ШЄ."
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "USA (cable)"
-msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш© (cable)"
+msgid "You can't select/unselect this package"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш±/Ш§ШІШ§Щ„Ш© Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Щ‡ Ш§Щ„Ш­ШІЩ…Ш©"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr "Ш§Щ„Щ€Щ„Ш§ЩЉШ§ШЄ Ш§Щ„Щ…ШЄЩ‘Ш­ШЇШ© Ш§Щ„ШЈЩ…Ш±ЩЉЩѓЩЉЩ‘Ш© (broadcast)"
+msgid "Warning"
+msgstr "ШЄШ­Ш°ЩЉШ±"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"- Other Files:\n"
 msgstr ""
-"XawTV ШєЩЉШ± Щ…Ш«ШЁЩ‘ШЄ!\n"
-"\n"
-"\n"
-"Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© ШЄЩ„ЩЃШ§ШІ Щ„ЩѓЩ† Щ„Щ… ЩЉШіШЄШ·Ш№ DrakX Ш§ЩѓШЄШґШ§ЩЃЩ‡Ш§ (Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ€Ш­ШЇШ§ШЄ bttv "
-"Щ€Щ„Ш§ saa7134\n"
-"ЩЃЩЉ \"/etc/modules\") ШЈЩ€ Щ„Щ… ШЄШ«ШЁЩ‘ШЄ xawtv, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШҐШ±ШіШ§Щ„ Щ†ШЄШ§Ш¦Ш¬\n"
-"Ш§Щ„ШЈЩ…Ш± \"lspcidrake -v -f\" Ш§Щ„Щ‰ \"install\\@mandrakesoft.com\"\n"
-"Щ…Ш№ Ш§Щ„Ш№Щ†Щ€Ш§Щ† \"undetected TV card\".\n"
-"\n"
 "\n"
-"ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ XawTV ШЁЩѓШЄШ§ШЁШ© Ш§Щ„ШЈЩ…Ш± \"urpmi xawtv\" ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±."
+"-Ш§Щ„Щ…Щ„ЩЃЩ‘Ш§ШЄ Ш§Щ„ШЈШ®Ш±Щ‰:\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "primary"
-msgstr "ШЈШіШ§ШіЩЉ"
+msgid "Remote host name"
+msgstr "Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЁШ№ЩЉШЇ"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "secondary"
-msgstr "Ш«Ш§Щ†Щ€ЩЉ"
+msgid "deactivate now"
+msgstr "Щ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„ШЄЩ†ШґЩЉШ· Ш§Щ„ШўЩ†"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "Ш§Щ†Щ‚Ш± Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„ШіЩ„ШіЩ„Ш© Ш§Щ„ЩЉШіШ±Щ‰ Щ„Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄЩ‡ Щ‡Щ†Ш§."
+msgid "access to X programs"
+msgstr "Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЁШ±Ш§Щ…Ш¬ X"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Unknown"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
+msgid "Computing the size of the Windows partition"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш­ШіШ§ШЁ Щ…ШіШ§Ш­Ш© ШЄШ¬ШІШ¦Ш© Windows"
 
-# ../../standalone/harddrake2:1, c-format
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "unknown"
-msgstr "ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ"
+msgid "Italy"
+msgstr "ШҐЩЉШ·Ш§Щ„ЩЉШ§"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Running \"%s\" ..."
-msgstr "Ш¬Ш§Ш±ЩЉ ШЄШґШєЩЉЩ„ \"%s\" ..."
+msgid "Name of printer"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Run config tool"
-msgstr "ШґШєЩ‘Щ„ ШЈШЇШ§Ш© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©"
+msgid "disable"
+msgstr "ШЄШ№Ш·ЩЉЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Configure module"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€Ш­ШЇШ©"
+msgid "error unmounting %s: %s"
+msgstr "Ш®Ш·ШЈ ЩЃЩЉ Ш§ШІШ§Щ„Ш© ШЄШ­Щ…ЩЉЩ„ %s: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Information"
-msgstr "Щ…Ш№Щ„Щ€Щ…Ш§ШЄ"
+msgid "Do it!"
+msgstr "Ш§ЩЃШ№Щ„Щ‡Ш§!"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Detected hardware"
-msgstr "Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„Щ…ЩЏЩѓШЄШґЩЃ"
+msgid "Cayman Islands"
+msgstr "Ш¬ШІШ± ЩѓШ§ЩЉЩ…Ш§Щ†"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 Ш§Щ„ШҐШµШЇШ§Ш± "
+msgid "%s not responding"
+msgstr "%s Щ„Ш§ ЩЉШіШЄШ¬ЩЉШЁ"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detection in progress"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚"
+msgid "Select model manually"
+msgstr "ШЄЩ… Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ†Щ‘Щ…Щ€Ш°Ш¬ ЩЉШЇЩ€ЩЉЩ‘Щ‹Ш§"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Author:"
-msgstr "Ш§Щ„Щ…Ш¤Щ„ЩЃ:"
+msgid "Format"
+msgstr "ШЄЩ†ШіЩЉЩ‚"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
 msgstr ""
-"Щ‡Ш°Ш§ Щ‡Щ€ HardDrake, ШЈШЇШ§Ш© Mandrake Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ.\n"
-"Ш§Щ„ШҐШµШЇШ§Ш±:"
+"Ш§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„ШЈЩѓШ«Ш± ШґЩЉЩ€Ш№Ш§Щ‹ Щ„Щ„ШҐШЄШµШ§Щ„ ШЁЩЂ adsl Щ‡ЩЉ pppoe.\n"
+"ШЁШ№Ш¶ Ш§Щ„ШҐШЄШµШ§Щ„Ш§ШЄ ШЄШіШЄШ®ШЇЩ… pptp, Щ€ Ш§Щ„Щ‚Щ„ЩЉЩ„ ШЄШіШЄШ®ШЇЩ… dhcp.\n"
+"Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ№Щ„Щ…, Ш§Ш®ШЄШ± 'Ш§ШіШЄШ®ШЇЩ… pppoe'"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr "Ш­Щ€Щ„ HardDrake"
+msgid "Various"
+msgstr "Щ…ШЄЩ†Щ€Ш№Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "/_About..."
-msgstr "/_Ш­Щ€Щ„..."
+msgid "Zip"
+msgstr "Zip"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr "/_ШЄЩ‚Ш±ЩЉШ± Ш®Ш·ШЈ"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
+"\n"
+"\n"
+"Щ„Щ… ЩЉШЄЩ…ЩѓЩ† Printerdrake Щ…Щ† Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш·Ш±Ш§ШІ Ш·Ш§ШЁШ№ШЄЩѓ %s. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±Ш§ШІ Ш§Щ„ШµШ­ЩЉШ­ "
+"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
-"Ш№Щ†ШЇ Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Ш¬Щ‡Ш§ШІ, ШіШЄШіШЄШ·ЩЉШ№  Ш±Ш¤ЩЉШ© Щ…Ш№Щ„Щ€Щ…Ш§ШЄ ШЄШ§Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„Ш­Щ‚Щ€Щ„ Ш§Щ„Щ…Ш№Ш±Щ€Ш¶Ш© ЩЃЩЉ Ш§Щ„ШҐШ·Ш§Ш± "
-"Ш§Щ„ШЈЩЉЩ…Щ† (\"Щ…Ш№Щ„Щ€Щ…Ш§ШЄ\")"
+"\n"
+"Ш№Щ„Щ‘Щ… Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Щ†Щ‚Щ„Щ‡Ш§ Ш«Щ… Ш§Щ†Щ‚Ш± \n"
+"\"Ш§Щ†Щ‚Щ„\"."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Select a device !"
-msgstr "Ш§Ш®ШЄШ± Ш¬Щ‡Ш§ШІШ§Щ‹!"
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Albanian"
+msgstr "Ш§Щ„ШЈЩ„ШЁШ§Щ†ЩЉШ©Щ‘"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Lithuania"
+msgstr "Щ„ЩЉШЄЩ€Ш§Щ†ЩЉШ§"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Щ…ШЇЩ…Ш¬"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "Detected model: %s %s"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш±Ш§ШІ: %s %s"
+
+#: ../../share/advertising/03-software.pl:1
+#, c-format
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Description of the fields:\n"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
 "\n"
 msgstr ""
-"Щ€ШµЩЃ Ш§Щ„Ш­Щ‚Щ€Щ„:\n"
-"\n"
+"Щ‡Ш°Ш§ Щ‡Щ€ HardDrake, ШЈШЇШ§Ш© Mandrake Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ.\n"
+"Ш§Щ„ШҐШµШЇШ§Ш±:"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Harddrake help"
-msgstr "Щ…ШіШ§Ш№ШЇШ© Harddrake"
+msgid "Local files"
+msgstr "Щ…Щ„ЩЃШ§ШЄ Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "/_Fields description"
-msgstr "/_Щ€ШµЩЃ Ш§Щ„Ш­Щ‚Щ€Щ„"
+msgid "maybe"
+msgstr "Ш±ШЁЩ…Ш§"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Щ…ШіШ§Ш№ШЇШ©"
+msgid "Panama"
+msgstr "ШЁЩ†Щ…Ш§"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "/_Quit"
-msgstr "/_Ш®Ш±Щ€Ш¬"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
+msgstr ""
+"ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ… Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ ЩЉШЁШЇЩ€ ШЈЩ†Щ‡Ш§ ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Щ…Щ€ШµЩ„ Щ„Щ„ШЄЩ„ЩЃШ§ШІ.\n"
+"ЩЉЩ…ЩѓЩ† ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ·Ш§Щ‚Ш© Щ„Щ„Ш№Щ…Щ„ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ЩЂ frame-buffer.\n"
+"\n"
+"Щ„Щ‡Ш°Ш§ Ш§Щ„ШєШ±Ш¶ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ ШЄЩ€ШµЩЉЩ„ ШЁШ·Ш§Щ‚Ш© Ш§Щ„Ш±ШіЩ€Щ… ШЁШ§Щ„ШЄЩ„ЩЃШ§ШІ Щ‚ШЁЩ„ ШЁШЇШЎ ШЄШґШєЩЉЩ„ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±.\n"
+"Ш«Щ… Ш§Ш®ШЄШ± \"TVout\" Щ…Щ† Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№\n"
+"\n"
+"Щ‡Щ„ Щ„ШЇЩЉЩѓ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©Шџ"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† _ШіЩ€Ш§Щ‚Ш§ШЄ Jazz"
+msgid "Monitor"
+msgstr "Ш§Щ„ШґШ§ШґШ©"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Autodetect _modems"
-msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† ШЈ_Ш¬Щ‡ШІШ© Ш§Щ„Щ…Щ€ШЇЩ…"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
+"ШЈЩ†ШЄ Ш№Щ„Щ‰ Щ€ШґЩѓ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш­ШіШ§ШЁ ЩЃЩЉ Windows Щ…Ш№ ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш±. ШЁШіШЁШЁ Ш®Ш·ШЈ ЩЃЩЉ "
+"Щ‡ЩЉЩѓЩ„ЩЉШ© Ш№Щ…ЩЉЩ„ Samba, ЩЉШЄЩ… Щ€Ш¶Ш№ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± ШЁЩ†Шµ Щ€Ш§Ш¶Ш­ ЩЃЩЉ ШіШ·Ш± ШЈЩ€Ш§Щ…Ш± Ш№Щ…ЩЉЩ„ Samba  "
+"Ш§Щ„Щ…ШіШЄШ®ШЇЩ… Щ„Щ†Щ‚Щ„ Щ€ШёЩЉЩЃШ© Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Windows. Щ„Ш°Ш§ ЩЃШҐЩ†Щ‡ ЩЉЩ…ЩѓЩ† Щ„ЩѓЩ„ Щ…ШіШЄШ®ШЇЩ… Ш№Щ„Щ‰ "
+"Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ЩЉШ№Ш±Ш¶ ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш§Щ„ШґШ§ШґШ© ШЁШ§ШіШЄШ®ШЇШ§Щ… ЩѓЩ„Щ…Ш§ШЄ Щ…Ш±Щ€Ш± Щ…Ш«Щ„ \"ps "
+"auxwww\".\n"
+"\n"
+"Щ†Ш­Щ† Щ†Щ†ШµШ­ ШЁШ§ШіШЄШ№Щ…Ш§Щ„ Щ€Ш§Ш­ШЇ Щ…Щ† Ш§Щ„ШЁШЇШ§Ш¦Щ„ Ш§Щ„ШЄШ§Щ„ЩЉШ© (ЩЃЩЉ ЩѓЩ„ Ш§Щ„Ш­Ш§?ШЄ Ш№Щ„ЩЉЩѓ Ш§Щ„ШЄШЈЩѓШЇ ШЈЩ† "
+"Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩ‚Ш· Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЄШіШЄШ·ЩЉШ№ Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Windows, Ш№Щ† "
+"Ш·Ш±ЩЉЩ‚ Ш§ШіШЄШ®ШЇШ§Щ… Ш¬ШЇШ§Ш± Щ†Ш§Ш±ЩЉ Щ…Ш«Щ„Ш§Щ‹):\n"
+"\n"
+"Ш§ШіШЄШ®ШЇЩ… Ш­ШіШ§ШЁ ШЇЩ€Щ† ЩѓЩ„Щ…Ш© Щ…Ш±Щ€Ш± Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… Windows, Щ…Ш«Щ„ Ш­ШіШ§ШЁ \"GUEST\" ШЈЩ€ Ш­ШіШ§ШЁ Ш®Ш§Шµ "
+"Щ„Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Щ„Щ„Ш·ШЁШ§Ш№Ш©. ? ШЄЩ‚Щ… ШЁШҐШІШ§Щ„Ш© Ш§Щ„Ш­Щ…Ш§ЩЉШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ ЩѓЩ„Щ…Ш§ШЄ Ш§Щ„Щ…Ш±Щ€Ш± Щ…Щ† Ш­ШіШ§ШЁЩѓ Ш§Щ„ШґШ®ШµЩЉ "
+"ШЈЩ€ Щ…Щ† Ш­ШіШ§ШЁ Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ….\n"
+"\n"
+"Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш®Ш§ШЇЩ… Windows Щ„Ш¬Ш№Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ…ШЄЩ€ЩЃШ±Ш© ШЄШ­ШЄ ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ LPD. Ш«Щ… Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ "
+"Ш§Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…Ш№ Щ†Щ€Ш№ Ш§Щ„Щ€ШµЩ„Ш© \"%s\" ЩЃЩЉ PrinterDrake.\n"
+"\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "/Autodetect _printers"
-msgstr "/ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉ Щ…Щ† Ш§Щ„_Ш·Ш§ШЁШ№Ш§ШЄ"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 ШЈЩ„ЩЃ Щ„Щ€Щ† (16 ШЁШЄ)"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Ш®ЩЉШ§Ш±Ш§ШЄ"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
+"\n"
+"- Ш§Ш­ЩЃШё Ш№Щ„Щ‰ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШ§Ш±:%s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "the vendor name of the processor"
-msgstr "Ш§ШіЩ… Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Size: %d KB\n"
+msgstr "Ш§Щ„Ш­Ш¬Щ…: %d ЩѓЩЉЩ„Щ€ШЁШ§ЩЉШЄ\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "the vendor name of the device"
-msgstr "Ш§ШіЩ… Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Ш¬Щ‡Ш§ШІ"
+msgid "Remove fonts on your system"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Ш®Ш·Щ€Ш· Щ…Щ† Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Щ†Щ€Ш№ Ш§Щ„ЩЂbus Ш§Щ„Щ…Ш±ШЄШЁШ·Ш© ШЁЩ‡ Ш§Щ„ЩЃШЈШ±Ш©"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
+"ШЄШ­Ш°ЩЉШ±, Щ…Щ€Ш§Ш¦Щ… Ш§Щ„ШґШЁЩѓШ© (%s) Щ…Ш№ШЇЩ‘ Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+"\n"
+"Щ‡Щ„ ШЄШ±ЩЉШЇ Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШўЩ„ЩЉШ§Щ‹?\n"
+"\n"
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Щ‚ЩЉШ§Щ… ШЁШ°Щ„Щѓ ЩЉШЇЩ€ЩЉШ§Щ‹ Щ„ЩѓЩ† ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ Ш№Щ„Щ… ШЁЩ…Ш§ ШЄЩЃШ№Щ„."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
-msgstr "Stepping of the cpu (sub model (generation) number)"
+msgid "Graphical interface at startup"
+msgstr "Щ€Ш§Ш¬Щ‡Ш© Ш±ШіЩ€Щ…ЩЉШ© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Model stepping"
-msgstr "Model stepping"
+msgid "Please enter the directory to save:"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Ш°ЩЉ ШіЩЉШЄЩ… Ш­ЩЃШёЩ‡:"
 
 #: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "format of floppies supported by the drive"
+msgstr "Щ†ШіЩ‚ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШЄЩЉ ШЄЩ‚ШЁЩ„Щ‡Ш§ Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
+
+#: ../../raid.pm:1
 #, c-format
-msgid "the number of the processor"
-msgstr "Ш±Щ‚Щ… Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ Щ„ЩЉШіШЄ ЩѓШ§ЩЃЩЉШ© Щ„Щ…ШіШЄЩ€Щ‰ RAID %d\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Processor ID"
-msgstr "Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
+msgstr ""
+"ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„ШўШЄЩЉШ©. Ш§Щ†Щ‚Ш± Щ†Щ‚Ш±Ш© Щ…ШІШЇЩ€Ш¬Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш© Щ„ШЄШєЩЉЩЉШ± Ш§Ш№ШЇШ§ШЇШ§ШЄЩ‡Ш§ "
+"Щ„Ш¬Ш№Щ„Щ‡Ш§ Ш·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© ШЈЩ€ Щ„Ш±Ш¤ЩЉШ© Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш­Щ€Щ„Щ‡Ш§."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "network printer port"
-msgstr "Щ…Щ†ЩЃШ° Ш·Ш§ШЁШ№Ш© Ш§Щ„ШґШЁЩѓШ©"
+msgid "Connected"
+msgstr "Щ…ШЄЩ‘ШµЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the name of the CPU"
-msgstr "Ш§ШіЩ… Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "USB printer \\#%s"
+msgstr "Ш·Ш§ШЁШ№Ш© USB \\#%s"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Name"
-msgstr "Ш§Щ„Ш§ШіЩ…"
+msgid "Macedonian"
+msgstr "Ш§Щ„Щ…Щ‚ШЇЩ€Щ†ЩЉШ©"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "the number of buttons the mouse has"
-msgstr "Ш№ШЇШЇ ШЈШІШ±Ш§Ш± Ш§Щ„ЩЃШЈШ±Ш©"
+msgid "Bridges and system controllers"
+msgstr "Щ…ШЄШ­ЩѓЩ…Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Number of buttons"
-msgstr "Ш№ШЇШЇ Ш§Щ„ШЈШІШ±Ш§Ш±"
+msgid "/File/_Save"
+msgstr "/Щ…Щ„ЩЃ/_Ш­ЩЃШё"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Official vendor name of the cpu"
-msgstr "Ш§Щ„ШҐШіЩ… Ш§Щ„Ш±ШіЩ…ЩЉ Щ„Щ…ШµЩ†Щ‘Ш№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Mali"
+msgstr "Щ…Ш§Щ„ЩЉ"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Model name"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш±Ш§ШІ"
+msgid "No details"
+msgstr "Щ„Ш§ ШЄЩЃШ§ШµЩЉЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Ш¬ЩЉЩ„ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ (Щ…Ш«Ш§Щ„: 8 Щ„ШЁЩ†ШЄЩЉЩ€Щ… III, ...)"
+msgid "very nice"
+msgstr "ШёШ±ЩЉЩЃ Ш¬ШЇШ§Щ‹"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Model"
-msgstr "Ш§Щ„Ш·Ш±Ш§ШІ"
+msgid "Preview"
+msgstr "Щ…Ш№Ш§ЩЉЩ†Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "hard disk model"
-msgstr "Ш·Ш±Ш§ШІ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
+msgid "Remote Control"
+msgstr "Ш§Щ„ШЄШ­ЩѓЩ… Ш№Щ† ШЁШ№ШЇ"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "class of hardware device"
-msgstr "ЩЃШ¦Ш© Ш¬Щ‡Ш§ШІ Ш§Щ„Ш№ШЄШ§ШЇ"
+msgid "Please select media for backup..."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Щ€ШіЩЉШ· Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ..."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Media class"
-msgstr "ЩЃШ¦Ш© Ш§Щ„Щ€ШіЩЉШ·"
+msgid "XFree86 server: %s\n"
+msgstr "Ш®Ш§ШЇЩ… XFree86: %s\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Sub generation of the cpu"
-msgstr "Ш§Щ„Ш¬ЩЉЩ„ Ш§Щ„Ш«Ш§Щ†Щ€ЩЉ Щ„Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Allow Thin Clients"
+msgstr "Ш§ШіЩ…Ш­ Щ„Щ„Ш№Щ…Щ„Ш§ШЎ Ш§Щ„Щ†Ш­Ш§ЩЃ (Thin Clients)"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Level"
-msgstr "Ш§Щ„Щ…ШіШЄЩ€Щ‰"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Ш§Щ„Ш¬Щ€Ш±Ш¬ЩЉШ© (Ш§Щ„ШЄШµЩ…ЩЉЩ… Ш§Щ„Ш±Щ€ШіЩЉ)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr "Щ†ШіЩ‚ Ш§Щ„ШЈЩ‚Ш±Ш§Шµ Ш§Щ„ШЄЩЉ ШЄЩ‚ШЁЩ„Щ‡Ш§ Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
+msgid "/_Options"
+msgstr "/_Ш®ЩЉШ§Ш±Ш§ШЄ"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Floppy format"
-msgstr "Щ†ШіЩ‚ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
+msgid "Your printer model"
+msgstr "Ш·Ш±Ш§ШІ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(ШЄШ­Ш°ЩЉШ±! ШЈЩ†ШЄ ШЄШіШЄШ®ШЇЩ… XFS Щ„Щ„ШЄШ¬ШІШ¦Ш© Ш§Щ„Ш¬Ш°Ш±ЩЉШ©,\n"
+"Ш№Щ…Щ„ Щ‚Ш±Шµ Щ…Ш±Щ† Щ„Щ„ШҐЩ‚Щ„Ш§Ш№ Щ‚ШЇ ЩЉЩЃШґЩ„ Ш№Щ„Щ‰ Ш§Щ„ШЈШ±Ш¬Ш­,\n"
+"Щ„ШЈЩ† XFS ЩЉШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ Щ…ШґШєЩ„ ЩѓШЁЩЉШ± Ш§Щ„Ш­Ш¬Щ…)."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Halt bug"
-msgstr "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
+msgstr ""
+"\n"
+"- Ш§Ш­Ш°ЩЃ ЩѓЩ„ Щ…Щ„ЩЃШ§ШЄ tar Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ ШЁШ№ШЇ ЩѓЩ„ Ш№Щ…Щ„ЩЉШ© Щ†ШіШ®.\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr "Щ…Ш№Ш§Щ„Ш¬Ш§ШЄ pentium Ш§Щ„Щ‚ШЇЩЉЩ…Ш© ЩѓШ§Щ†ШЄ ШЄШЄЩ€Щ‚ЩЃ Ш№Щ† Ш§Щ„Ш№Щ…Щ„ Ш№Щ†ШЇ Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ЩѓЩ€ШЇ F00F"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШµЩ€Ш±Ш© CD ШЈЩ€ DVD, ЩЃШ¶Щ„Ш§Щ‹ Ш§Щ†ШіШ® ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉЩ† Щ€Щ…Щ„ЩЃШ§ШЄ rpm"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш·Ш±ЩЃЩЉШ§ШЄ Mandrake"
+
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "F00f bug"
-msgstr "F00f bug"
+msgid "Save"
+msgstr "Ш­ЩЃШё"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr "Щ†Ш№Щ… ШЄШ№Щ†ЩЉ ШЈЩ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Ш§Щ„Щ…ШіШ§Ш№ШЇ Щ„Щ„Ш№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Ш­ШіШ§ШЁЩЉШ© Щ„ШЇЩЉЩ‡ Щ…ШЄШ¬Щ‡ Щ„Щ„ШҐШіШЄШ«Щ†Ш§ШЎШ§ШЄ"
+msgid "The %s is unsupported"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…ШЇШ№Щ€Щ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr "Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„ЩЂFPU Щ„ШЇЩЉЩ‡ Щ…ШЄШ¬Щ‡ IRQ"
+msgid "Load the drivers for your usb devices."
+msgstr "Ш­Щ…Щ‘Щ„ Щ…ШґШєЩ„Ш§ШЄ ШЈШ¬Щ‡ШІШ© USB."
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr "Щ†Ш№Щ… ШЄШ№Щ†ЩЉ ШЈЩ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Щ„ШЇЩЉЩ‡ Щ…Ш№Ш§Щ„Ш¬ Щ…ШіШ§Ш№ШЇ Щ„Щ„Ш№Щ…Щ„ЩЉШ§ШЄ Ш§Щ„Ш­ШіШ§ШЁЩЉШ©"
+msgid "Disk"
+msgstr "Ш§Щ„Щ‚Ш±Шµ"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr "Щ‡Щ„ FPU Щ…Щ€Ш¬Щ€ШЇ"
+msgid "Enter a printer device URI"
+msgstr "ШЈШЇШ®Щ„ URI Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"Щ†Ш¬Ш§Ш­ MandrakeSoft Щ…ШЁЩ†ЩЉ Ш№Щ„Щ‰ Щ…ШЁШЇШЈ Ш­Ш±ЩЉШ© Ш§Щ„ШЁШ±Ш§Щ…Ш­. Щ†ШёШ§Щ… Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Ш¬ШЇЩЉШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ "
+"Щ‡Щ€ Щ†ШЄЩЉШ¬Ш© Щ„Щ„ШЄШ№Ш§Щ€Щ† Щ€ Ш§Щ„Ш№Щ…Щ„ Ш§Щ„Ш¬Ш§ШЇ Щ…Щ† Ш¬ШІШЎ Щ…Щ† Щ…Ш¬ШЄЩ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш­Щ€Щ„ Ш§Щ„Ш№Ш§Щ„Щ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fdiv bug"
-msgstr "Fdiv bug"
+msgid "Israel"
+msgstr "Ш§ШіШ±Ш§Ш¦ЩЉЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "CPU flags reported by the kernel"
+msgid "French Guiana"
+msgstr "ШєЩ€ЩЉШ§Щ†Ш§ Ш§Щ„ЩЃШ±Щ†ШіЩЉШ©"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Flags"
-msgstr "Flags"
+msgid "default:LTR"
+msgstr "default:RTL"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr "Щ€Ш­ШЇШ© Щ†Щ€Ш§Ш© Щ„ЩЉЩ†ЩѓШі Ш§Щ„ШЄЩЉ ШЄШЄШ№Ш§Щ…Щ„ Щ…Ш№ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ"
+msgid "add a rule"
+msgstr "Ш§Ш¶Ш§ЩЃШ© Щ‚Ш§Ш№ШЇШ©"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Module"
-msgstr "Щ€Ш­ШЇШ©"
+msgid "A command line must be entered!"
+msgstr "ЩЉШ¬ШЁ Ш§ШЇШ®Ш§Щ„ ШіШ·Ш± ШЈЩ€Ш§Щ…Ш±"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "Ш§Ші Щ…Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„ШЇЩЉЩ†Ш§Щ…ЩЉЩѓЩЉ Ш§Щ„Ш¬ШЇЩЉШЇ Ш§Щ„Ш°ЩЉ ЩЉШЄЩ… ШЄЩ€Щ„ЩЉШЇЩ‡ Щ…Щ† devfs"
+msgid "Select user manually"
+msgstr "Ш§Ш®ШЄШ±Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЉШЇЩ€ЩЉЩ‘Щ‹Ш§"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New devfs device"
-msgstr "Ш¬Щ‡Ш§ШІ devfs Ш¬ШЇЩЉШЇ"
+msgid "Transfer printer configuration"
+msgstr "Щ†Щ‚Щ„ ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "old static device name used in dev package"
-msgstr "Ш§ШіЩ… Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‚ШЇЩЉЩ… Ш§Щ„ШіШ§ЩѓЩ† Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЃЩЉ Ш­ШІЩ…Ш© dev"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ…ЩѓЩЉЩ† Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш°ЩѓЩ€Ш±Ш© ШЈШ№Щ„Ш§Щ‡Шџ\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Old device file"
-msgstr "Щ…Щ„ЩЃ Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ‚ШЇЩЉЩ…"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "This field describes the device"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Ш­Щ‚Щ„ ЩЉШµЩЃ Ш§Щ„Ш¬Щ‡Ш§ШІ"
+msgid "%s (Port %s)"
+msgstr "%s (Ш§Щ„Щ…Щ†ЩЃШ° %s)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use network connection to backup"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШґШЁЩѓШ© Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
-"ШЄШ±ШЇШЇ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШЁШ§Щ„Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ (Ш§Щ„Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ ШЄШґЩЉШ± Ш§Щ„Щ‰ Ш§Щ„Ш№ШЇШЇ Ш§Щ„ШЄЩ‚Ш±ЩЉШЁЩЉ Щ…Щ† Ш§Щ„ШЄШ№Щ„ЩЉЩ…Ш§ШЄ "
-"Ш§Щ„ШЄЩЉ ЩЉШіШЄШ·ЩЉШ№ Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ ШЄЩ†ЩЃЩЉШ°Щ‡Ш§ ЩЃЩЉ Ш§Щ„Ш«Ш§Щ†ЩЉШ© Ш§Щ„Щ€Ш§Ш­ШЇШ©)"
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr "Ш§Щ„ШЄШ±ШЇШЇ (Щ…ЩЉШєШ§Щ‡ЩЉШ±ШЄШІ)"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„ШЄЩЉ ЩЉЩ…ЩѓЩ† Ш§Щ„Ш­ШµЩ€Щ„ Ш№Щ„ЩЉЩ‡Ш§ Щ…Щ† ШЄШ№Щ„ЩЉЩ…Ш§ШЄ cpuid"
+msgid "Accept user"
+msgstr "Щ€Ш§ЩЃЩ‚ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Cpuid level"
-msgstr "Щ…ШіШЄЩ€Щ‰ Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Server"
+msgstr "Ш®Ш§ШЇЩ…"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "Ш№Ш§Ш¦Щ„Ш© Ш§Щ„Щ…Ш№Ш§Щ„Ш­ (Щ…Ш«Щ„Ш§: 6 Щ„ЩЃШ¦Ш© i686)"
+msgid "Bad choice, try again\n"
+msgstr "Ш§Ш®ШЄЩЉШ§Ш± ШіЩЉШ¦, Ш­Ш§Щ€Щ„ Щ…Ш±Ш© ШЈШ®Ш±Щ‰\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr "Ш№Ш§Ш¦Щ„Ш© Щ‡Щ€ЩЉШ© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬"
+msgid "Heard and McDonald Islands"
+msgstr "Ш¬ШІШ± Щ‡ЩЉШ±ШЇ Щ€ Щ…Ш§ЩѓШЇЩ€Щ†Ш§Щ„ШЇ"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr "Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„Щ…Ш№Ш§Щ„Ш¬ Щ„ШЇЩЉЩ‡ Cyrix 6x86 Coma bug"
+msgid "No alternative driver"
+msgstr "Щ„Ш§ Щ…ШґШєЩ„ ШЁШЇЩЉЩ„"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Coma bug"
-msgstr "Coma bug"
+msgid "Toggle to expert mode"
+msgstr "Ш§Щ„Щ†ШЄЩ‚Ш§Щ„ Ш§Щ„Щ‰ Щ€Ш¶Ш№ЩЉШ© Ш§Щ„Ш®ШЁЩЉШ±"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr "Ш§Щ…ЩѓШ§Щ†ЩЉШ§ШЄ Щ…Щ…ЩЉШІШ© Щ„Щ‡Ш°Ш§ Ш§Щ„Щ…ШґШєЩ„ (Ш§Щ…ЩѓШ§Щ†ЩЉШ© Ш§Щ„Щ†ШіШ® ШЈЩ€ ШЇШ№Щ… DVD)"
+msgid "(on this machine)"
+msgstr "(Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„Ш¬Щ‡Ш§ШІ)"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Drive capacity"
-msgstr "Ш­Ш¬Щ… Ш§Щ„ШіЩ€Ш§Щ‚Ш©"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Ш№Щ†Щ€Ш§Щ† Ш§Щ„ШЁЩ€Ш§ШЁШ§ШЄ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш№Щ„Щ‰ Ш§Щ„Щ†ШіЩ‚ 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Ш­Ш¬Щ… (Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„Ш«Ш§Щ†ЩЉ)"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr "ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§Щ„Щ€ЩЉЩ†Щ…Щ€ШЇЩ… \"%s\", Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Ш§Щ„Щ…Ш·Щ„Щ€ШЁШ© Шџ"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cache size"
-msgstr "Ш­Ш¬Щ… Ш§Щ„Ш°Ш§ЩѓШ±Ш© Ш§Щ„Щ…Ш®ШЁШ¦ЩЉШ©"
+msgid "Looking at packages already installed..."
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Ш«ШЁШЄШ© Щ…ШіШЁЩ‚Ш§Щ‹..."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+msgid "Use Differential Backups"
 msgstr ""
-"- ШЈШ¬Щ‡ШІШ© pci: ШЄШ№Ш·ЩЉ Щ…Щ†ЩЃШ° PCI, Ш§Щ„Ш¬Щ‡Ш§ШІ Щ€ Щ€ШёЩЉЩЃШ© Щ‡Ш°Щ‡ Ш§Щ„ШЁШ·Ш§Щ‚Ш©\n"
-"- ШЈШ¬Щ‡ШІШ© eide: Ш§Щ„Ш¬Щ‡Ш§ШІ ШҐЩ…Ш§ ШЈЩ† ЩЉЩѓЩ€Щ† Ш¬Щ‡Ш§ШІ slave ШЈЩ€ master\n"
-"- ШЈШ¬Щ‡ШІШ© scsi: scsi bus Щ€ Щ‡Щ€ЩЉШ© Ш¬Щ‡Ш§ШІ scsi"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Location on the bus"
-msgstr "Ш§Щ„Щ…ЩѓШ§Щ† Ш№Щ„Щ‰ Ш§Щ„ЩЂbus"
+msgid "Driver"
+msgstr "Ш§Щ„Щ…Ш­Ш±Щѓ"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
-"- ШЈШ¬Щ‡ШІШ© PCI Щ€ USB: Щ‡Ш°Ш§ ЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШµЩ†Ш№ЩЉЩ† Щ€ Ш§Щ„ШЈШ¬Щ‡ШІШ© Щ€ Ш§Щ„Щ…ШµЩ†Ш№ЩЉЩ† Ш§Щ„Ш«Ш§Щ†Щ€ЩЉЩЉЩ† Щ€ "
-"Ш§Щ„ШЈШ¬Щ‡ШІШ© Ш§Щ„Ш«Ш§Щ†Щ€ЩЉШ© Щ„Щ‡Щ€ЩЉШ§ШЄ PCI/USB"
+"Linuxconf ЩЉЩ‚Щ€Щ… ЩЃЩЉ ШЁШ№Ш¶ Ш§Щ„ШЈШ­ЩЉШ§Щ† ШЁШ§Щ„ШЄШ±ШЄЩЉШЁ Щ„Ш№Щ…Щ„ ШЁШ№Ш¶ Ш§Щ„ШЈШ№Щ…Ш§Щ„\n"
+"Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ„Щ„Щ…Ш­Ш§ЩЃШёШ© Ш№Щ„Щ‰ Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ†ШёШ§Щ…."
 
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus xxxxxxxx" (with xxxx arabic),
-# and not "Bus: datadatadata xxxxxxxx"
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bus identification"
-msgstr "معرف الـ Bus‏"
+msgid "Printer on remote lpd server"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш№Щ„Щ‰ Ш®Ш§ШЇЩ… lpd ШЁШ№ЩЉШЇ"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
-"Щ†Щ€Ш§Ш© ЩЉЩ†ЩѓШі ШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄШґШєЩЉЩ„ Ш­Щ„Щ‚Ш© Ш­ШіШ§ШЁЩЉШ© (Calculation Loop) Ш№Щ†ШЇ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№ Щ„ШЄЩ†ШґЩЉШ· "
-"ШЈШЇШ§Ш© Ш№ШЇ Ш§Щ„Щ€Щ‚ШЄ. ЩЉШЄЩ… Ш­ЩЃШё Ш§Щ„Щ†ШЄЩЉШ¬Ш© ЩѓЩЂbogomips ЩѓШ·Ш±ЩЉЩ‚Ш© Щ„Щ„ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„Щ…Ш№Ш§Щ„Ш¬."
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Bogomips"
+"Щ‚ШЁЩ„ ШЄШ«ШЁЩЉШЄ ШЈЩЉ Ш®Ш·Щ€Ш· ШЄШЈЩѓШЇ ШЈЩ†Щ‡ Щ„ШЇЩЉЩѓ Ш§Щ„Ш­Щ‚ ШЁШ§ШіШЄШ®ШЇШ§Щ…Щ‡Щ… Щ€ ШЄШ«ШЁЩЉШЄЩ‡Щ… Ш№Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ….\n"
+"\n"
+"-ЩЉЩ…ЩѓЩ†Щѓ ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш®Ш·Щ€Ш· ШЁШ§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„Ш№Ш§ШЇЩЉШ©. ЩЃЩЉ Ш­Ш§Щ„Ш§ШЄ Щ†Ш§ШЇШ±Ш©, Щ‚ШЇ ШЄШЄШіШЁШЁ Ш§Щ„Ш®Ш·Щ€Ш· "
+"Ш§Щ„Щ…ШІЩЉЩЃШ© ЩЃЩЉ ШЄШ№Щ„ЩЉЩ‚ Ш®Ш§ШЇЩ… X."
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr "Щ‚Щ†Ш§Ш© EIDE/SCSI"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second before your\n"
+"default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Channel"
-msgstr "Ш§Щ„Щ‚Щ†Ш§Ш©"
+msgid "No mouse"
+msgstr "Щ„Ш§ ЩЃШЈШ±Ш©"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "Germany"
+msgstr "ШЈЩ„Щ…Ш§Щ†ЩЉШ§"
 
-# U+200F (RTL mark) has been inserted after "Bus" so the display
-# on screen is correctly "datadatadata :Bus", and not "Bus: datadatadata"
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Bus"
-msgstr "Bus‏"
+msgid "Austria"
+msgstr "Ш§Щ„Щ†Щ…ШіШ§"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…ШґШєЩ„Ш§ШЄ Ш§Щ„ШЁШЇЩЉЩ„Ш© Щ„ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr "ШґШєЩ‘Щ„ \"sndconfig\" ШЁШ№ШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЄЩ‡ЩЉШ¦Ш© ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
 
-#: ../../standalone/harddrake2:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Alternative drivers"
-msgstr "Щ…ШґШєЩ„Ш§ШЄ ШЁШЇЩЉЩ„Ш©"
+msgid "Collapse Tree"
+msgstr "Collapse Tree"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЈЩ† ЩЉЩ‚Щ€Щ… ШІШ± BackSpace ШЁШ№Щ…Щ„ Щ€ШёЩЉЩЃШ© ШІШ± Delete ЩЃЩЉ ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш±Шџ"
+msgid "Auto Install Configurator"
+msgstr "ШЈШЇШ§Ш© Ш§Ш№ШЇШ§ШЇ Ш§Щ„Щ…Ш«ШЁЩ‘ШЄ Ш§Щ„ШўЩ„ЩЉ"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Щ…Щ† ЩЃШ¶Щ„Щѓ Ш§Ш®ШЄШ± ШЄШµЩ…ЩЉЩ… Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­Щѓ"
+msgid "Configure networking"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Щ„Щ… ШЈШЄЩ…ЩѓЩ† Щ…Щ† ШЁШЇШЎ Ш§Щ„ШЄШ±Щ‚ЩЉШ© Ш§Щ„Ш­ЩЉШ© !!!\n"
+msgid "Where do you want to install the bootloader?"
+msgstr "ШЈЩЉЩ† ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄ Щ…Ш­Щ…Щ‘Щ„ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№Шџ"
 
-#: ../../standalone/livedrake:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
-"ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ ЩЃЩЉ ШіЩ€Ш§Щ‚ШЄЩѓ Щ€ Ш§Ш¶ШєШ· Щ…Щ€Ш§ЩЃЩ‚ Ш№Щ†ШЇЩ…Ш§ ШЄЩ†ШЄЩ‡ЩЉ.\n"
-"ШҐШ°Ш§ Щ„Щ… ЩЉЩѓЩ† Щ‚Ш±Шµ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ„ШЇЩЉЩѓ Ш§Ш¶ШєШ· Ш§Щ„ШєШ§ШЎ Щ„Щ„ШҐЩ…ШЄЩ†Ш§Ш№ Ш№Щ† Ш§Щ„ШЄШ­ШЇЩЉШ« Ш§Щ„Ш­ЩЉ."
+"Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Щ„ШєШ© Ш§Щ„Щ…ЩЃШ¶Щ„Ш© ШіЩЉШ¤Ш«Ш± Ш№Щ„Щ‰ Щ„ШєШ© Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ©\n"
+"Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ€ Ш§Щ„Щ†ШёШ§Щ… ШЁШґЩѓЩ„ Ш№Ш§Щ…. ШЈЩ€?Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШЄЩЉ\n"
+"ШЄШЄЩ€Ш§Ш¬ШЇ ЩЃЩЉЩ‡Ш§, Ш«Щ… Ш§Щ„Щ„ШєШ© Ш§Щ„ШЄЩЉ ШЄШЄШ­ШЇШ« ШЁЩ‡Ш§.\n"
+"\n"
+"Ш¶ШєШ· ШІШ± \"Щ…ШЄЩ‚ШЇЩ…\" ШіЩЉШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш± Щ„ШєШ§ШЄ\n"
+"ШЈШ®Ш±Щ‰ Щ„ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄЩ‡Ш§ Ш№Щ„Щ‰ Щ…Ш­Ш·Ш© Ш§Щ„Ш№Щ…Щ„ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ,Щ€ Щ…Щ† Ш«Щ…\n"
+"ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„Щ„ШєШ§ШЄ Щ„Щ€Ш«Ш§Ш¦Щ‚ Ш§Щ„Щ…ШіШ§Ш№ШЇШ© Щ€ Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ, Щ…Ш«Щ„Ш§Щ‹\n"
+"Ш§Ш°Ш§ ЩѓЩ†ШЄ ШіШЄШіШЄШ¶ЩЉЩЃ Щ…ШіШЄШ®ШЇЩ…ЩЉЩ† Щ…Щ† ШЈШіШЁШ§Щ†ЩЉШ§ Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ, Ш§Ш®ШЄШ± Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ©\n"
+"ЩѓЩ„ШєШ© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ© ЩЃЩЉ Ш§Щ„Щ†Щ…Ш· Ш§Щ„ШґШ¬Ш±ЩЉ Щ€ \"Ш§?ШіШЁШ§Щ†ЩЉШ©\" ЩЃЩЉ Ш§Щ„Щ‚ШіЩ…\n"
+"Ш§Щ„Щ…ШЄЩ‚ШЇЩ….\n"
+"?Ш­Шё ШЈЩ†Щѓ Щ„ШіШЄ Щ…Щ‚ЩЉШЇШ§Щ‹ ШЁШ§Ш®ШЄЩЉШ§Ш± Щ„ШєШ© Щ€Ш§Ш­ШЇШ© Ш§Ш¶Ш§ЩЃЩЉШ©. Ш­Ш§Щ„\n"
+"Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ…Ш­Щ„ЩЉШ©, Ш§Ш¶ШєШ· ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ ->\"\n"
+"Щ„Щ„Щ…ШЄШ§ШЁШ№Ш©.\n"
+"\n"
+"Щ„Щ„ШЄШєЩЉЩЉШ± ШЁЩЉЩ† Ш§Щ„Щ„ШєШ§ШЄ Ш§Щ„Щ…ШЄШ№ШЇШЇШ© Ш§Щ„Щ…Ш«ШЁШЄШ© Ш№Щ„Щ‰ Ш§Щ„Щ†ШёШ§Щ…, ЩЉЩ…ЩѓЩ†Щѓ\n"
+"ШЄШґШєЩЉЩ„ Ш§?Щ…Ш± \"/usr/sbin/localedrake\"ЩѓЩ…ШіШЄШ®ШЇЩ… Ш¬Ш°Ш± Щ„ШЄШєЩЉЩЉШ±\n"
+"Ш§Щ„Щ„ШєШ© Ш§Щ„Щ…ШіШЄШ®ШЇЩ…Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Щ†ШёШ§Щ… ЩѓЩѓЩ„. ШЄШґШєЩЉЩ„ Ш§?Щ…Ш± ЩѓЩ…ШіШЄШ®ШЇЩ… Ш№Ш§ШЇЩЉ\n"
+"ШіЩЉШєЩЉШ± ЩЃЩ‚Ш· Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ„ШєШ© Щ„Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЃЩ‚Ш·."
 
-#: ../../standalone/livedrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "ШєЩЉЩ‘Ш± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…ШЇШ№Щ€Щ… Щ…Щ† Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Mandrake Linux."
 
-#: ../../standalone/localedrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "ШЄЩ… Ш№Щ…Щ„ Ш§Щ„ШЄШєЩЉЩЉШ±, Щ€ Щ„ЩѓЩ† Щ„ЩЉШЄЩ… ШЄЩЃШ№ЩЉЩ„Щ‡ ЩЉШ¬ШЁ Ш№Щ„ЩЉЩѓ Ш§Щ„Ш®Ш±Щ€Ш¬"
+msgid "DHCP client"
+msgstr "DHCP Ш§Щ„Ш№Щ…ЩЉЩ„ "
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Save as.."
-msgstr "Ш­ЩЃШё ШЁШҐШіЩ….."
+msgid "Restoring from file %s failed: %s"
+msgstr "ЩЃШґЩ„ШЄ Ш§Щ„ШҐШіШЄШ№Ш§ШЇШ© Щ…Щ† Ш§Щ„Щ…Щ„ЩЃ %s: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please enter your email address below "
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш№Щ†Щ€Ш§Щ† ШЁШ±ЩЉШЇЩѓ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ ШЈШЇЩ†Ш§Щ‡ "
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (serial, old C7 type)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "alert configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЄЩ†ШЁЩЉЩ‡"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Щ‡Щ„ ШЈЩ†ШЄ Щ…ШЄШЈЩѓШЇ ШЈЩ†Щѓ ШЄШ±ЩЉШЇ ШЄЩ†ШµЩЉШЁ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©Шџ\n"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "ШіЩ€ЩЃ ШЄШіШЄЩ„Щ… ШЄЩ†ШЁЩЉЩ‡Ш§ Ш§Ш°Ш§ ЩѓШ§Щ† Ш§Щ„ШЄШ­Щ…ЩЉЩ„ ШЈШ№Щ„Щ‰ Щ…Щ† Щ‡Ш°Щ‡ Ш§Щ„Щ‚ЩЉЩ…Ш©"
+msgid "New devfs device"
+msgstr "Ш¬Щ‡Ш§ШІ devfs Ш¬ШЇЩЉШЇ"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "load setting"
-msgstr "Ш­Щ…Щ„ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
+msgid "ERROR: Cannot spawn %s."
+msgstr "ERROR: Cannot spawn %s."
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
-msgstr "ШіЩ€ЩЃ ШЄШіШЄЩ„Щ… ШЄЩ†ШЁЩЉЩ‡Ш§Щ‹ ШҐШ°Ш§ ЩѓШ§Щ†ШЄ ШЈШ­ШЇ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© ШєЩЉШ± Ш№Ш§Щ…Щ„Ш©."
+msgid "Boot Style Configuration"
+msgstr "Ш§Ш№ШЇШ§ШЇ ШЈШіЩ„Щ€ШЁ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "ШЄШІШ§Щ…Щ† Щ€Щ‚ШЄ ШўЩ„ЩЉ (ШЁШ§ШіШЄШ®ШЇШ§Щ… NTP)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "service setting"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
+msgid "Backup files not found at %s."
+msgstr "Щ…Щ„ЩЃШ§ШЄ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇШ© Ш№Щ„Щ‰ %s"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Xinetd Service"
-msgstr "Ш®ШЇЩ…Ш§ШЄ Xinetd"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "ШґЩѓШ±Ш§Щ‹ Щ„Ш§Ш®ШЄЩЉШ§Ш±Щѓ Mandrake Linux 9.1"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Webmin Service"
-msgstr "Ш®ШЇЩ…Ш§ШЄ Webmin"
+msgid "Armenian (phonetic)"
+msgstr "Ш§Щ„ШЈШ±Щ…ЩЉЩ†ЩЉШ© (ШµЩ€ШЄЩЉ)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "SSH Server"
-msgstr "Ш®Ш§ШЇЩ… SSH"
+msgid "Card model:"
+msgstr "Щ†Щ€Ш№ Ш§Щ„ШЁШ·Ш§Щ‚Ш©"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Samba Server"
-msgstr "Ш®Ш§ШЇЩ… Samba"
+msgid "Thin Client"
+msgstr "Ш№Щ…ЩЉЩ„ Щ†Ш­ЩЉЩЃ (Thin Client)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Postfix Mail Server"
-msgstr "Ш®Ш§ШЇЩ… Ш§Щ„ШЁШ±ЩЉШЇ Postfix"
+msgid "Start Server"
+msgstr "Ш§ШЁШЇШЈ Ш§Щ„Ш®Ш§ШЇЩ…"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ftp Server"
-msgstr "Ш§Щ„Ш®Ш§ШЇЩ… FTP"
+msgid "Turkmenistan"
+msgstr "ШЄШ±ЩѓЩ…Ш§Щ†ШіШЄШ§Щ†"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Domain Name Resolver"
-msgstr "Domain Name Resolver"
+msgid "All remote machines"
+msgstr "ЩѓЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Ш®Ш§ШЇЩ… Ш§Щ„Щ€ЩЉШЁ Apache"
+msgid "Install themes"
+msgstr "Ш«ШЁШЄ Ш§Щ„ШіЩ…Ш§ШЄ"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
-"ШЈЩ‡Щ„Ш§ ШЁЩѓЩ… Ш§Щ„Щ‰ ШЈШЇШ§Ш© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШЁШ±ЩЉШЇ.\n"
-"\n"
-"Щ‡Щ†Ш§ ШіЩЉЩ…ЩѓЩ†Щѓ ШҐШ№ШЇШ§ШЇ Щ†ШёШ§Щ… Ш§Щ„ШЄЩ†ШЁЩЉЩ‡\n"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Mail alert configuration"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© ШЄЩ†ШЁЩЉЩ‡ Ш§Щ„ШЁШ±ЩЉШЇ"
+" ШЄШ­ШЇЩЉШ«Ш§ШЄ 2002 MandrakeSoft Щ…Щ† Stew Benedict <sbenedict\\@mandrakesoft.com>"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "Mail alert"
-msgstr "ШЄЩ†ШЁЩЉШ© ШЁШ±ЩЉШЇЩЉ"
+msgid "Espanol"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "ЩЉШ±Ш¬Щ‰ Ш§Щ„ШҐЩ†ШЄШёШ§Ш±, Ш¬Ш§Ш±ЩЉ ШЄШ­Щ„ЩЉЩ„ Ш§Щ„Щ…Щ„ЩЃ: %s"
+msgid "Preparing installation"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Ш¶ЩЉШ± Щ„Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Content of the file"
-msgstr "Щ…Ш­ШЄЩ€ЩЉШ§ШЄ Ш§Щ„Щ…Щ„ЩЃ"
+msgid "Edit selected host/network"
+msgstr "Ш­Ш±Щ‘Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш©"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Calendar"
-msgstr "Ш§Щ„ШЄЩ‚Щ€ЩЉЩ…"
+msgid "Add User -->"
+msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ®ШЇЩ… -->"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose file"
-msgstr "Ш§Ш­ШЄЩЉШ§Ш± Щ…Щ„ЩЃ"
+msgid "Nauru"
+msgstr "Щ†Ш§Щ€Ш±Щ€"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "but not matching"
-msgstr "Щ„ЩѓЩ† Щ„ЩЉШі Щ…Щ€Ш§Ш¦Щ…Ш©"
+msgid "True Type fonts installation"
+msgstr "ШЄШ«ШЁЩЉШЄ Ш®Ш·Щ€Ш· True Type"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "matching"
-msgstr "Ш§Щ„Щ…Щ€Ш§Ш¦Щ…Ш©"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "ШЄШ­Щ‚Щ‘Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…ШЁШ§ШґШ±Ш©Щ‹ ШЁШ§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Settings"
-msgstr "Ш§Щ„Ш¶ШЁШ·"
+msgid "LAN configuration"
+msgstr "ШҐШ№ШЇШ§ШЇ LAN"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "ШЈШЇШ§Ш© Щ„Щ…Ш±Ш§Щ‚ШЁШ© ШіШ¬Щ„Ш§ШЄ Щ†ШёШ§Щ…Щѓ"
+msgid "hard disk model"
+msgstr "Ш·Ш±Ш§ШІ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "search"
-msgstr "ШЁШ­Ш«"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§ШіШЄШ®ШЇШ§Щ… LVM Logical Volume Щ„Щ†Щ‚Ш·Ш© Ш§Щ„ШЄШ­Щ…ЩЉЩ„ %s"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr "ШґШ±Щ€Ш­ ШЈШЇЩ€Ш§ШЄ Mandrake"
+msgid "Get Windows Fonts"
+msgstr "Ш§Ш­ШµЩ„ Ш№Щ„Щ‰ Ш®Ш·Щ€Ш· Windows"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Syslog"
-msgstr "syslog"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Messages"
-msgstr "Ш§Щ„Ш±ШіШ§Ш¦Щ„"
+msgid "Iranian"
+msgstr "Ш§Щ„ШҐЩЉШ±Ш§Щ†ЩЉЩ‘Ш©"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "User"
-msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
+msgid "Croatia"
+msgstr "ЩѓШ±Щ€Ш§ШЄЩЉШ§"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "/Help/_About..."
-msgstr "/Щ…ШіШ§Ш№ШЇШ©/_Ш­Щ€Щ„ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬..."
+msgid "Gateway:"
+msgstr "Ш§Щ„ШЁЩ€Ш§ШЁШ©:"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Ш®ЩЉШ§Ш±Ш§ШЄ/Ш§Ш®ШЄШЁШ§Ш±"
+msgid "Add server"
+msgstr "Ш§Ш¶ЩЃ Ш®Ш§ШЇЩ…"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/-"
-msgstr "/Щ…Щ„ЩЃ/-"
+msgid "Remote printer name"
+msgstr "Ш§ШіЩ… Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЁШ№ЩЉШЇШ©"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Щ…Щ„ЩЃ/Ш­ЩЃШё _ШЁШ§ШіЩ…"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Device: "
+msgstr "Ш§Щ„Ш¬Щ‡Ш§ШІ: "
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Щ…Щ„ЩЃ/_Ш­ЩЃШё"
+msgid "Printerdrake"
+msgstr "Printerdrake"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "License agreement"
+msgstr "Ш§ШЄЩЃШ§Щ‚ЩЉШ© Ш§Щ„ШЄШ±Ш®ЩЉШµ"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Щ…Щ„ЩЃ/_ЩЃШЄШ­"
+msgid "System Options"
+msgstr "Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please enter the directory where backups are stored"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§Щ„ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ЩЃЩЉЩ‡ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ©"
 
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Щ…Щ„ЩЃ/_Ш¬ШЇЩЉШЇ"
+msgid "Please choose the desired security level"
+msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ† Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇЩ‡"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Show only for the selected day"
-msgstr "ШҐШ№Ш±Ш¶ ШіШ¬Щ„Ш§ШЄ Ш§Щ„ЩЉЩ€Щ… Ш§Щ„Щ…Ш®ШЄШ§Ш± ЩЃЩ‚Ш·"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
 
-#: ../../standalone/mousedrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "Щ…Ш­Ш§ЩѓШ§Ш© Ш§Щ„ШІШ± Ш§Щ„Ш«Ш§Щ„Ш«Шџ"
+msgid ", USB printer"
+msgstr ", Ш·Ш§ШЁШ№Ш© USB"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "ЩЃШ¶Щ„Ш§Щ‹, Ш§Ш®ШЄШ± Щ†Щ€Ш№ Ш§Щ„ЩЃШЈШ±Ш© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ."
+msgid "Choose the applications that will support the fonts:"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ Ш§Щ„ШЄЩЉ ШіШЄШЇШ№Щ… Ш§Щ„Ш®Ш·Щ€Ш· :"
 
-#: ../../standalone/net_monitor:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Connect %s"
-msgstr "Ш§ШЄШµЩ„ ШЁЩЂ %s"
+msgid "Configure X"
+msgstr "ШЄЩ‡ЩЉШ¦Ш© X"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Disconnect %s"
-msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁЩЂ %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Ш§Щ„ШЄЩ‘Ш±ЩѓЩЉШ© (Ш·Ш±Ш§ШІ \"F\" Ш§Щ„ШЄЩ‚Щ„ЩЉШЇЩЉ)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr "ШЄШ­Ш°ЩЉШ±, ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§ШЄШµШ§Щ„ ШҐЩ†ШЄШ±Щ†ШЄ ШўШ®Ш±, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ЩЉШіШЄШ®ШЇЩ… ШґШЁЩѓШЄЩѓ"
+msgid "Congratulations!"
+msgstr "ШЄЩ‡Ш§Щ†ЩЉЩ†Ш§!"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "received"
-msgstr "Щ…ЩЏШіШЄЩ‚ШЁЩ„Ш©"
+msgid "Use owner id for execution"
+msgstr "Ш§ШіШЄШ®ШЇЩ… owner id Щ„Щ„ШЄЩ†ЩЃЩЉШ°"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "transmitted"
-msgstr "Щ…ШЁШ№Щ€Ш«Ш©"
+msgid "Down"
+msgstr "ШЄШ­ШЄ"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "received: "
-msgstr "Щ…ЩЏШіШЄЩ‚ШЁЩ„: "
+msgid "Raw printer (No driver)"
+msgstr "Ш·Ш§ШЁШ№Ш© Ш®Ш§Щ… (Щ„Ш§ Щ…ШґШєЩ„)"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "sent: "
-msgstr "Щ…ЩЏШ±ШіЩ„: "
+msgid "Install rpm"
+msgstr "Ш«ШЁШЄ rpm"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Local measure"
-msgstr "Ш§Ш¬Ш±Ш§ШЎ Щ…Ш­Щ„ЩЉ"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"Щ„Ш·ШЁШ§Ш№Ш© Щ…Щ„ЩЃ Щ…Щ† ШіШ·Ш± Ш§Щ„ШЈЩ€Ш§Щ…Ш± ЩЉЩ…ЩѓЩ†Щѓ ШЈЩ† ШЄШіШЄШ®ШЇЩ… Ш§Щ„ШЈЩ…Ш± \"%s <file>\" ШЈЩ€ ШЈЩ† ШЄШіШЄШ®ШЇЩ… "
+"ШЈШЇШ§Ш© Ш·ШЁШ§Ш№Ш© Ш±ШіЩ€Щ…ЩЉШ©: \"xpp <file>\" ШЈЩ€ \"kprinter <file>\". Ш§Щ„ШЈШЇЩ€Ш§ШЄ Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ© "
+"ШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Щ€ ШЄШ№ШЇЩЉЩ„ Ш®ЩЉШ§Ш±Ш§ШЄЩ‡Ш§ ШЁШіЩ‡Щ€Щ„Ш©.\n"
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "average"
-msgstr "Щ…ШЄЩ€ШіШ·"
+msgid "Time remaining "
+msgstr "Ш§Щ„Щ€Щ‚ШЄ Ш§Щ„Щ…ШЄШЁЩ‚ЩЉ"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Color configuration"
-msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШЈЩ„Щ€Ш§Щ†"
+msgid "UK keyboard"
+msgstr "Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЁШ±ЩЉШ·Ш§Щ†ЩЉШ©"
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"ЩЃШґЩ„ Ш§Щ„ШҐШЄШµШ§Щ„.\n"
-"ШЄШЈЩѓШЇ Щ…Щ† Ш§Щ„Щ€ШµЩ„Ш© ЩЃЩЉ Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake."
+msgid "Unmount"
+msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„ШЄШ­Щ…ЩЉЩ„"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection complete."
-msgstr "ШЄЩ… Ш§Щ„ШҐШЄШµШ§Щ„."
+msgid "Uninstall Fonts"
+msgstr "Ш§Ш®Ш°ЩЃ Ш§Щ„Ш®Ш·Щ€Ш·"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Ш§ЩѓШЄЩ…Щ„ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "ЩЃШґЩ„ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "German (no dead keys)"
+msgstr "Ш§Щ„ШЈЩ„Щ…Ш§Щ†ЩЉШ© (Щ„Ш§ Щ…ЩЃШ§ШЄЩЉШ­ Щ…ЩЉШЄШ©)"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Connecting to the Internet "
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "Transferring %s..."
+msgstr "Ш¬Ш§Ш±ЩЉ Щ†Щ‚Щ„ %s..."
 
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 ШЈЩ„ЩЃ Щ„Щ€Щ† (15 ШЁШЄ)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„ШҐШЄШµШ§Щ„..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr "ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШµШЇЩЉШ± ШЁШ§ШіШЄШ®ШЇШ§Щ… NFS ШЈЩ€ Samba. ШЈЩЉ Щ…Щ†Щ‡Щ…Ш§ ШЄШ±ЩЉШЇ"
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Logs"
-msgstr "Ш§Щ„ШіШ¬Щ„Ш§ШЄ"
+msgid "Reboot"
+msgstr "Ш§Ш№Ш§ШЇШ© Ш§Щ„ШЄШґШєЩЉЩ„"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connection Time: "
-msgstr "Щ€Щ‚ШЄ Ш§Щ„ШҐШЄШµШ§Щ„:"
+msgid "Gambia"
+msgstr "ШєШ§Щ…ШЁЩЉШ§"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Receiving Speed:"
-msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШіШЄЩ‚ШЁШ§Щ„"
+msgid "Mandrake Control Center"
+msgstr "Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Sending Speed:"
-msgstr "ШіШ±Ш№Ш© Ш§Щ„ШҐШ±ШіШ§Щ„:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"ЩЉЩ…ЩѓЩ†Щѓ Ш§ШЇШ®Ш§Щ„ Щ…Щ†Ш§ЩЃШ° Щ…ШЄЩ†Щ€Ш№Ш©. \n"
+"ШЈЩ…Ш«Щ„Ш© ШµШ§Щ„Ш­Ш© Щ‡ЩЉ: 139/tcp 139/udp.\n"
+"Ш§Щ„Щ‚ Щ†ШёШ±Ш© Ш№Щ„Щ‰ /etc/services Щ„Щ…ШІЩЉШЇ Щ…Щ† Ш§Щ„Щ…Ш№Щ„Щ€Щ…Ш§ШЄ."
 
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Statistics"
-msgstr "Ш§Ш­ШµШ§Ш¦ЩЉШ§ШЄ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
+"Ш§Щ„ШґШ§ШґШ©\n"
+"\n"
+"   ЩЉЩ…ЩѓЩ† Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§ЩѓШЄШґШ§ЩЃ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШ§ШґШ© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†ШЄЩѓ\n"
+"ШўЩ„ЩЉШ§Щ‹. Ш§Щ† Щ„Щ… ЩЉШµЩ„ Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄЩЉ Щ„ШЇЩЉЩѓ\n"
+"Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©."
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Profile "
-msgstr "Ш§Щ„ШЄШґЩѓЩЉЩ„:"
+msgid "\t-Tape \n"
+msgstr "\t-Ш§Щ„ШґШ±ЩЉШ· \n"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Network Monitoring"
-msgstr "Щ…Ш±Ш§Щ‚ШЁШ© Ш§Щ„ШґШЁЩѓШ©"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
+"Щ„Ш§ ЩЉЩ€Ш¬ШЇ Щ…ШЄШµЩЃШ­ Щ…Ш«ШЁШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ЩЃШ¶Щ„Ш§Щ‹ Щ‚Щ… ШЁШЄШ«ШЁЩЉШЄ Щ…ШЄШµЩЃШ­ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ШєШЁ ЩЃЩЉ ШЄШµЩЃШ­ Щ†ШёШ§Щ… "
+"Ш§Щ„Щ…ШіШ§Ш№ШЇШ©"
 
-#: ../../standalone/printerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Reading data of installed printers..."
-msgstr "Ш¬Ш§Ш±ЩЉ Щ‚Ш±Ш§ШЎШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш§Щ„Щ…Ш«ШЁШЄШ©..."
+msgid "Remember this password"
+msgstr "ШЄШ°ЩѓЩ‘Ш± ЩѓЩ„Щ…Ш© Ш§Щ„ШіШ± Щ‡Ш°Щ‡"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Name/IP address of host:"
-msgstr "Ш№Щ†Щ€Ш§Щ† IP/Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ:"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Щ…ШґШ§Ш±ЩѓШ© ШҐШЄШµШ§Щ„ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ…Щ…ЩѓЩ‘ЩЋЩ†Ш© Ш§Щ„ШўЩ†."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
+msgid "\t-Network by SSH.\n"
+msgstr "\t-Ш§Щ„ШґШЁЩѓШ© Ш№Щ† Ш·Ш±ЩЉЩ‚ SSH.\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Scannerdrake"
-msgstr "Scannerdrake"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
+msgstr ""
+" Ш§Ш°Ш§ ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„Щ…Ш·Щ„Щ€ШЁШ© ШўЩ„ЩЉШ§Щ‹, ЩѓЩ„ Щ…Ш§ Ш№Щ„ЩЉЩѓ Щ‡Щ€ Ш§Ш®ШЄЩЉШ§Ш±Щ‡Ш§ Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Ш«Щ… "
+"ШЈШ¶ЩЃ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ®ШЇЩ…, ЩѓЩ„Щ…Ш© Ш§Щ„Щ…Ш±Щ€Ш±, Щ€/ШЈЩ€ Щ…Ш¬Щ…Щ€Ш№Ш© Ш§Щ„Ш№Щ…Щ„ Ш§Щ† Ш§Ш­ШЄШ¬ШЄ Щ„Ш°Щ„Щѓ."
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "ЩЃШ¶Щ„Ш§ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШЈЩ€ Ш№Щ†Щ€Ш§Щ† IP.\n"
+msgid "Use the free space on the Windows partition"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…ШіШ§Ш­Ш© Ш§Щ„ЩЃШ§Ш±ШєШ© Ш№Щ„Щ‰ ШЄШ¬ШІШ¦Ш© Windows"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„ШЄЩЉ ЩЉШ¬ШЁ ШЈЩ† ШЄШЄЩ€ЩЃШ± Щ„Щ‡ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©:"
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡ Ш№Щ„Щ‰ %s, Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡ ШўЩ„ЩЉШ§Щ‹Шџ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Sharing of local scanners"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "This machine"
-msgstr "Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©"
+msgid "XFree86 driver: %s\n"
+msgstr "Щ…ШґШєЩ„ XFree86: %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove selected host"
-msgstr "Ш§Ш­Ш°ЩЃ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ/Ш§Щ„ШґШЁЩѓШ© Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Ш§Щ„Щ‚Ш§Ш¦Щ…Ш© Щ…ШіШЁЩ‚Ш§Щ‹, Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Ш¶Ш§ЩЃШЄЩ‡ Щ…Ш±Ш© ШЈШ®Ш±Щ‰.\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Edit selected host"
-msgstr "Ш­Ш±Ш± Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш®ШЄШ§Ш±"
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
+msgstr ""
+"\n"
+"                      ШЄЩ‚Ш±ЩЉШ± DrakBackup \n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add host"
-msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ¶ЩЉЩЃ"
+msgid "Choose the packages you want to install"
+msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш­ШІЩ… Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ ШЄШ«ШЁЩЉШЄЩ‡Ш§"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr "ШЄЩ€Ш¬ШЇ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Щ…Щ†Щ‡Ш§:"
+msgid "Papua New Guinea"
+msgstr "ШЁШ§ШЁЩ€Ш§ ШєЩЉЩ†ЩЉШ§ Ш§Щ„Ш¬ШЇЩЉШЇШ©"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Usage of remote scanners"
-msgstr "Ш§ШіШЄШ®ШЇШ§Щ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Serbian (cyrillic)"
+msgstr "Ш§Щ„ШµШ±ШЁЩЉШ© (ШіЩЉШ±ЩЉЩ„ЩЉ)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "All remote machines"
-msgstr "ЩѓЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Make kernel message quiet by default"
+msgstr "Ш§Ш¬Ш№Щ„ Ш±ШіШ§Ш¦Щ„ Ш§Щ„Щ†Щ€Ш§Ш© ШµШ§Щ…ШЄШ© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ§Щ‹"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr "ШЄЩ€Ш­ШЇ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Щ€ШµЩ€Щ„Ш© Щ…Ш­Щ„ЩЉШ§Щ‹ Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш§:"
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr ""
+"Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ№ЩЉЩЉЩ† Щ‡Ш°Щ‡  Ш§Щ„Ш·Ш§ШЁШ№Ш© (\"%s\")\n"
+"ЩѓШ·Ш§ШЁШ№Ш© Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©Шџ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ: "
+msgid "The DHCP end range"
+msgstr "Ш­ШЇЩ€ШЇ DHCP end"
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use scanners on remote computers"
-msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Ш­Щ€Ш§ЩЉШіШЁ Ш§Щ„ШЁШ№ЩЉШЇШ©"
+msgid "Creating bootdisk..."
+msgstr "Ш§Щ†ШґШ§ШЎ Щ‚Ш±Шµ Ш§Щ„ШҐЩ‚Щ„Ш§Ш№..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ: "
+msgid "Wait please, testing your connection..."
+msgstr "Ш§Щ†ШЄШёШ± Щ…Щ† ЩЃШ¶Щ„Щѓ, Ш¬Ш§Ш±ЩЉ Ш§Ш®ШЄШЁШ§Ш± Ш§Щ„ШҐШЄШµШ§Щ„..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr "Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ„Ш­Щ€Ш§ШіЩЉШЁ Ш§Щ„ШЈШ®Ш±Щ‰"
+msgid "Bringing down the network"
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§ШєЩ„Ш§Щ‚ Ш§Щ„ШґШЁЩѓШ©"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
-msgstr ""
-"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ ШЈЩ† ШЄЩ‚Ш±Ш± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш№Щ„Щ‰ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© ЩЉШ¬ШЁ "
-"ШЈЩ† ШЄЩѓЩ€Щ† Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ‡Ш°Ш№ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©."
+msgid "Login ID"
+msgstr "Ш§ШіЩ… Ш§Щ„ШЇШ®Щ€Щ„"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
-"Щ‡Щ†Ш§ ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ЩЉЩ…ЩѓЩ† Ш§Щ„Щ€ШµЩ€Щ„ "
-"Ш§Щ„ЩЉЩ‡Ш§ Щ…Щ† Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§Щ„ШЁШ№ЩЉШЇШ© Щ€ Ш№Щ† Ш·Ш±ЩЉЩ‚ ШЈЩЉ Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ ШЁШ№ЩЉШЇШ©."
+"NFS ШЁШ±Щ€ШЄЩ€ЩѓЩ€Щ„ ШґШ§Ш¦Ш№ Щ„Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ„Щ‰ ШґШЁЩѓШ§ШЄ\n"
+"TCP/IP. Щ‡Ш°Щ‡ Ш§Щ„Ш®ШЇЩ…Ш© ШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Щ„ШЄШ­ЩѓЩ… ШЁШ§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚ NFS."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Ш№Ш§ШЇШ© ШЄЩ€Щ„ЩЉШЇ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„Щ…Ш№ШЇЩ‘Ш© ..."
+msgid "DHCP Client"
+msgstr "DHCP Ш§Щ„Ш№Щ…ЩЉЩ„"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Searching for new scanners ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Ш¬ШЇЩЉШЇШ©..."
+msgid "dismiss"
+msgstr "Ш§Щ‡Щ…Ш§Щ„"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Щ…Ш№ШЇЩ‘Ш©..."
+msgid "Printing/Scanning on \"%s\""
+msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„Ш·ШЁШ§Ш№Ш©/Ш§Щ„Щ…ШіШ­ Ш№Щ„Щ‰ \"%s\""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Scanner sharing"
-msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©"
+msgid "omit raid modules"
+msgstr "RAID Ш§Щ‡Щ…Щ„ Щ€Ш­ШЇШ§ШЄ Ш§Щ„"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
-msgid "Add a scanner manually"
-msgstr "ШЈШ¶ЩЃ Щ…Ш§ШіШ­ Ш¶Щ€Ш¦ЩЉ ЩЉШЇЩ€ЩЉШ§Щ‹"
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
+msgstr ""
+"lpd Щ‡Щ€ Щ…Ш±Ш§Щ‚ШЁ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Ш°ЩЉ ЩЉШ­ШЄШ§Ш¬Щ‡ ШЈЩ…Ш± lpr Щ„Щ„Ш№Щ…Щ„ ШЁШґЩ„ ШµШ­ЩЉШ­. ШЈШіШ§ШіШ§Щ‹\n"
+"Щ‡Щ€ Ш®Ш§ШЇЩ… ЩЉЩ€ШµЩ„ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш© Ш§Щ„Щ‰ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Search for new scanners"
-msgstr "Ш§Щ„ШЁШ­Ш« Ш№Щ† Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Ш¬ШЇЩЉШЇШ©..."
+msgid "Internet Connection Configuration"
+msgstr "ШҐШ№ШЇШ§ШЇШ§ШЄ Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr "Щ„Ш§ ШЄЩ€Ш¬ШЇ Щ…Ш§ШіШ­Ш§ШЄ Ш¶Щ€Ш¦ЩЉШ© Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ.\n"
+msgid "comma separated numbers"
+msgstr "ШЈШ±Щ‚Ш§Щ… Щ…ЩЃШµЩ€Щ„Ш© ШЁШ§Щ„ЩЃШ§ШµЩ„Ш©"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
-"Ш§Щ„Щ…Ш§ШіШ­Ш© Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
-"\n"
-"%s\n"
-"Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ†ШёШ§Щ…Щѓ.\n"
+"Ш№Щ†ШЇ Ш§Ш®ШЄЩЉШ§Ш±Щѓ Щ„Ш¬Щ‡Ш§ШІ, ШіШЄШіШЄШ·ЩЉШ№  Ш±Ш¤ЩЉШ© Щ…Ш№Щ„Щ€Щ…Ш§ШЄ ШЄШ§Ш¬Щ‡Ш§ШІ ЩЃЩЉ Ш§Щ„Ш­Щ‚Щ€Щ„ Ш§Щ„Щ…Ш№Ш±Щ€Ш¶Ш© ЩЃЩЉ Ш§Щ„ШҐШ·Ш§Ш± "
+"Ш§Щ„ШЈЩЉЩ…Щ† (\"Щ…Ш№Щ„Щ€Щ…Ш§ШЄ\")"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule up one level"
+msgstr "Ш§Щ†Щ‚Щ„ Ш§Щ„Щ‚Ш§Ш№ШЇШ© Ш§Щ„Щ…Ш®ШЄШ§Ш±Ш© Ш§Щ„Щ‰ ЩЃЩ€Щ‚ ШЁЩ…ШіШЄЩ€Щ‰ Щ€Ш§Ш­ШЇ"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"The following scanners\n"
+"The following scanner\n"
 "\n"
 "%s\n"
-"are available on your system.\n"
+"is available on your system.\n"
 msgstr ""
-"Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
+"Ш§Щ„Щ…Ш§ШіШ­Ш© Ш§Щ„Ш¶Щ€Ш¦ЩЉШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©\n"
 "\n"
 "%s\n"
 "Щ…ШЄЩ€ЩЃШ±Ш© Щ„Щ†ШёШ§Щ…Щѓ.\n"
 
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
-"ШЄЩ…ШЄ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ %s.\n"
-"ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Щ…ШіШ­ Ш§Щ„Щ…ШіШЄЩ†ШЇШ§ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… \"XSane\" Щ…Щ† ЩЃШ±Ш№ Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ©/ШЁШ±Ш§Щ…Ш¬ Ш±ШіЩ€Щ…ЩЉШ© "
-"ЩЃЩЉ Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„ШЄШ·ШЁЩЉЩ‚Ш§ШЄ."
-
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "choose device"
-msgstr "Ш§Ш®ШЄШ± Ш§Щ„Ш¬Щ‡Ш§ШІ "
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ЩЃШ№Щ„Ш§Щ‹ Ш­Ш°ЩЃ Ш§Щ„Ш·Ш§ШЁШ№Ш© \"%s\"Шџ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please select the device where your %s is attached"
-msgstr "ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± Ш§Щ„Ш¬Щ‡Ш§ШІ Ш§Щ„Щ…ШЄШµЩ„ ШЁЩ‡ %s"
+msgid "I can't find any room for installing"
+msgstr "Щ„Ш§ ЩЉЩ…ЩѓЩ†Щ†ЩЉ Ш§ЩЉШ¬Ш§ШЇ Щ…ШіШ§Ш­Ш© ЩЃШ§Ш±ШєШ© Щ„Щ„ШЄШ«ШЁЩЉШЄ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Searching for scanners ..."
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЁШ­Ш« Ш№Щ† Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©..."
+msgid "Default printer"
+msgstr "Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉШ©"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Auto-detect available ports"
-msgstr "ШЄШ­Щ‚Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш©"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
+msgstr ""
+"Щ„Щ‚ШЇ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш·Ш±Щ‚ Щ…ШЄШ№ШЇШЇШ© Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш±ЩЉЩ‚Ш© Ш§Щ„ШЄЩЉ ШЄШ±ЩЉШЇ Ш§ШіШЄШ®ШЇШ§Щ…Щ‡Ш§.\n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr "(Щ…Щ„Ш­Щ€ШёШ©: Ш§Щ„Щ…Щ†Ш§ЩЃШ° Ш§Щ„Щ…ШЄЩ€Ш§ШІЩЉШ© Щ„Ш§ ЩЉЩ…ЩѓЩ† Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ†Щ‡Ш§ ШўЩ„ЩЉШ§Щ‹)"
+msgid "Modify RAID"
+msgstr "ШЄШ№ШЇЩЉЩ„ RAID"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
-"Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ %s ЩЉШ¬ШЁ Ш§Ш№ШЇШ§ШЇЩ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ PrinterDrake.\n"
-"ЩЉЩ…ЩѓЩ† ШЄШґШєЩЉЩ„ PrinterDrake Щ…Щ† Щ…Ш±ЩѓШІ ШЄШ­ЩѓЩ… Mandrake ЩЃЩЉ Щ‚ШіЩ… Ш§Щ„Ш№ШЄШ§ШЇ."
+"ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш© ISDN PCI, Щ„ЩѓЩ† Щ„Щ… ЩЉШЄЩ… Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Щ†Щ€Ш№Щ‡Ш§. ЩЃШ¶Щ„Ш§Щ‹ Ш§Ш®ШЄШ± ШЁШ·Ш§Щ‚Ш© PCI "
+"ЩЃЩЉ Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄШ§Щ„ЩЉШ©."
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "The %s is unsupported"
-msgstr "Щ‡Ш°Ш§ Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…ШЇШ№Щ€Щ…"
+msgid "Add user"
+msgstr "Ш§Ш¶ЩЃ Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr "Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…Ш№Ш±Щ€ЩЃ Щ…Щ† Щ‚ШЁЩ„ Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Scannerdrake."
+msgid "RAID-disks %s\n"
+msgstr "ШЈЩ‚Ш±Ш§Шµ RAID %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "Ш§Щ„ЩЂ %s ШєЩЉШ± Щ…ШЇШ№Щ€Щ… Щ…Щ† Щ‡Ш°Ш§ Ш§Щ„ШҐШµШЇШ§Ш± Щ…Щ† Mandrake Linux."
+msgid "Liberia"
+msgstr "Щ„ЩЉШЁШ±ЩЉШ§"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Port: %s"
-msgstr "Ш§Щ„Щ…Щ†ЩЃШ°: %s"
+msgid ""
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
+msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ€Ш§Ш¬Щ‡Ш© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ.\n"
+"\n"
+"ШЈЩ…Ш«Щ„Ш©:\n"
+"\t\tppp+ Щ„Щ€ШµЩ„Ш§ШЄ Ш§Щ„Щ…Щ€ШЇЩ… Щ€ DSL, \n"
+"\t\teth0, ШЈЩ€ eth1 Щ„Щ€ШµЩ„Ш§ШЄ Ш§Щ„ЩѓЩЉШЁЩ„, \n"
+"\t\tippp+ Щ„Щ€ШµЩ„Ш§ШЄ ISDN.\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid ", "
-msgstr ", "
+msgid "Choose your keyboard"
+msgstr "Ш§Ш®ШЄШ± Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Detected model: %s"
-msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш±Ш§ШІ: %s"
+msgid "Format partitions"
+msgstr "ШЄШ¬Щ‡ЩЉШІ Ш§Щ„ШЄШ¬ШІШ¦Ш§ШЄ"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " ("
-msgstr " ("
+msgid "Automatic correction of CUPS configuration"
+msgstr "ШЄШµШ­ЩЉШ­ ШўЩ„ЩЉ Щ„ШЄЩ‡ЩЉШ¦Ш© CUPS"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Select a scanner model"
-msgstr "Ш§Ш®ШЄШ± Ш·Ш±Ш§ШІ Ш§Щ„Щ…Ш§ШіШ­ Ш§Щ„Ш¶Щ€Ш¦ЩЉ"
+msgid "Running \"%s\" ..."
+msgstr "Ш¬Ш§Ш±ЩЉ ШЄШґШєЩЉЩ„ \"%s\" ..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s ШєЩЉШ± Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ Щ‚Ш§Ш№ШЇШ© ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Ш§ШіШ­Ш§ШЄ Ш§Щ„Ш¶Щ€Ш¦ЩЉШ©, Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡ ЩЉШЇЩ€ЩЉШ§Щ‹Шџ"
+msgid "enable radio support"
+msgstr "ШЄЩ…ЩѓЩЉЩ† ШЇШ№Щ… Ш§Щ„Ш±Ш§ШЇЩЉЩ€"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡ Ш№Щ„Щ‰ %s, Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦ШЄЩ‡ ШўЩ„ЩЉШ§Щ‹Шџ"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Hardware probing in progress"
-msgstr "Ш¬Ш§Ш±ЩЉ Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ"
-
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices were added:\n"
-msgstr "ШЄЩ…ШЄ Ш§Ш¶Ш§ЩЃШ© ШЁШ№Ш¶ Ш§Щ„Ш№ШЄШ§ШЇ:\n"
+msgid "Scanner sharing to hosts: "
+msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ Ш№Щ„Щ‰ Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃШ§ШЄ: "
 
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr "ШЄЩ…ШЄ Ш§ШІШ§Щ„Ш© ШЁШ№Ш¶ Ш§Щ„ШЈШ¬Щ‡ШІШ© ЩЃЩЉ ЩЃШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ \"%s\":\n"
+msgid "Loopback file name: %s"
+msgstr "Ш§ШіЩ… Щ…Щ„ЩЃ Loopback: %s"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
-msgstr ""
-"Щ†Ш¬Ш§Ш­ MandrakeSoft Щ…ШЁЩ†ЩЉ Ш№Щ„Щ‰ Щ…ШЁШЇШЈ Ш­Ш±ЩЉШ© Ш§Щ„ШЁШ±Ш§Щ…Ш­. Щ†ШёШ§Щ… Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Ш¬ШЇЩЉШЇ Ш§Щ„Ш®Ш§Шµ ШЁЩѓ "
-"Щ‡Щ€ Щ†ШЄЩЉШ¬Ш© Щ„Щ„ШЄШ№Ш§Щ€Щ† Щ€ Ш§Щ„Ш№Щ…Щ„ Ш§Щ„Ш¬Ш§ШЇ Щ…Щ† Ш¬ШІШЎ Щ…Щ† Щ…Ш¬ШЄЩ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш­Щ€Щ„ Ш§Щ„Ш№Ш§Щ„Щ…"
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Ш±Ш¬Ш§ШЎ Ш§Ш®ШЄШ± Ш§Щ„Ш·Ш§ШЁШ№Ш© Ш§Щ„ШЄЩЉ ШіШЄШ°Щ‡ШЁ Ш§Щ„ЩЉЩ‡Ш§ Щ€ШёШ§Ш¦ЩЃ Ш§Щ„Ш·ШЁШ§Ш№Ш©."
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr "ШЈЩ‡Щ„Ш§Щ‹ ШЁЩѓ ЩЃЩЉ Ш№Ш§Щ„Щ… Ш§Щ„Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ЩЃШЄЩ€Ш­Ш©"
+msgid "Do not transfer printers"
+msgstr "Щ„Ш§ ШЄЩ†Щ‚Щ„ Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
 
-#: ../../share/advertising/01-thanks.pl:1
-#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "ШґЩѓШ±Ш§Щ‹ Щ„Ш§Ш®ШЄЩЉШ§Ш±Щѓ Mandrake Linux 9.1"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "ШЄЩ€Щ‚ЩЉШЄ Щ…Ш§ Щ‚ШЁЩ„ Ш§Щ‚Щ„Ш§Ш№ Ш§Щ„ШµЩ€Ш±Ш© Ш§Щ„Ш§ЩЃШЄШ±Ш§Ш¶ЩЉШ©"
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
 msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
-"Щ„Щ…ШґШ§Ш±ЩѓШЄЩ†Ш§ ШЁЩ…Ш№Ш±ЩЃШЄЩѓ Щ€ Щ„Щ„Щ…ШіШ§Ш№ШЇШ© ЩЃЩЉ ШЁЩ†Ш§ШЎ ШЈШЇЩ€Ш§ШЄ Щ„ЩЉЩ†ЩѓШі, Ш§Щ†Ш¶Щ… Ш§Щ„Щ‰  Щ…Щ†ШЄШЇЩЉШ§ШЄ Ш§Щ„Щ†Щ‚Ш§Шґ "
-"Ш§Щ„ШЄЩЉ ШіШЄШ¬ШЇЩ‡Ш§ ЩЃЩЉ ШµЩЃШ­Ш© \"Community\" Ш№Щ„Щ‰ Щ…Щ€Щ‚Ш№Щ†Ш§"
+"\n"
+"Ш¬Щ…ЩЉШ№ Ш§Щ„Ш­Щ‚Щ€Щ‚ Щ…Ш­ЩЃЩ€ШёШ© (C) 2001-2002 Щ„ЩЂMandrakeSoft \n"
+"\tDUPONT Sebastien (Ш§Щ„ШҐШµШЇШ§Ш± Ш§Щ„ШЈШµЩ„ЩЉ)\n"
+"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Щ‡Щ€ ШЁШ±Щ†Ш§Щ…Ш¬ Ш­Ш±; ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ€ШІЩЉШ№Ш© Щ€/ШЈЩ€ ШЄШ№ШЇЩЉЩ„Щ‡\n"
+" ШЄШ­ШЄ ШЁЩ†Щ€ШЇ Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© (GPL) ЩѓЩ…Ш§ Щ†ЩЏШґЩђШ±ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+" Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш©; ШҐЩ…Ш§ Ш§ШҐШµШЇШ§Ш± Ш§Щ„Ш«Ш§Щ†ЩЉ Щ…Щ† Ш§Щ„ШЄШ±Ш®ЩЉШµ ШЈЩ€\n"
+" ШЈЩЉ Щ†ШіШ®Ш© ШЄШ§Щ„ЩЉШ© (Ш­ШіШЁ Ш§Ш®ШЄЩЉШ§Ш±Щѓ).\n"
+"\n"
+" Щ‡Ш°Ш§ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ ЩЉЩЏЩ€ШІЩ‘ЩЋШ№ Ш№Щ„Щ‰ ШЈЩ…Щ„ ШЈЩ† ЩЉЩѓЩ€Щ† Щ…ЩЃЩЉШЇШ§,\n"
+" لكن دون أي ضمان’; حتى بدون الضمانة المفهومة\n"
+" Щ„Щ„ШҐШЄШ¬Ш§Ш± ШЈЩ€ Ш§Щ„Щ…Щ†Ш§ШіШЁШ© Щ„ШєШ±Ш¶ Щ…Ш№ЩЉЩ†. Ш§Щ†ШёШ±\n"
+" Ш±Ш®ШµШ© GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш© Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„.\n"
+"\n"
+" ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ‚ШЇ ШЄШіЩ„Щ…ШЄ Щ†ШіШ®Ш© Щ…Щ† ШЄШ±Ш®ЩЉШµ GNU Ш§Щ„Ш№Щ…Щ€Щ…ЩЉШ© Ш§Щ„ШґШ§Щ…Щ„Ш©\n"
+" Щ…Ш№ Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬; ЩЃЩЉ Ш­Ш§Щ„Ш© Ш№ШЇЩ… ШЄШіЩ„Щ… Ш§Щ„Ш±Ш®ШµШ© Ш±Ш§ШіЩ„ Ш¬Щ…Ш№ЩЉШ© Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ Ш§Щ„Ш­Ш±Ш© Ш№Щ„Щ‰ "
+"Ш§Щ„Ш№Щ†Щ€Ш§Щ†  Ш§Щ„ШЄШ§Щ„ЩЉ\n"
+" Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA "
+"02111-1307, USA.\n"
+"\n"
+" ШґЩѓШ± Ш®Ш§Шµ Ш§Щ„Щ‰:\n"
+"    -  pfm2afm:   \n"
+"\t Щ…Щ† Ken Borgendale:\n"
+"\t    ЩЉШ­Щ€Щ‘Щ„ Ш®Ш·Щ€Ш· .pfm ЩЃЩЉ Windows Ш§Щ„Щ‰ Ш®Ш·Щ€Ш· .afm (Adobe Font Matrix)\n"
+"    -  type1inst:\n"
+"\t Щ…Щ† James Macnicol:  \n"
+"\t    ЩЉЩ€Щ„ШЇ type1inst Щ…Щ„ЩЃШ§ШЄ fonts.dir Щ€ fonts.scale Щ€ Fontmap.\n"
+"    -  ttf2pt1:    \n"
+"\t  Щ…Щ† Andrew Weeks, Frank Siegert, Thomas Henlich Щ€ Sergey Babkin  \n"
+"             ЩЉШ­Щ€Щ„ Ш®Ш·Щ€Ш· ttf Ш§Щ„Щ‰ Ш®Ш·Щ€Ш· afm Щ€ pfb\n"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
-"Щ‡Щ„ ШЄШ±ЩЉШЇ Щ…Ш№Ш±ЩЃШ© Ш§Щ„Щ…ШІЩЉШЇ Ш№Щ† Щ…Ш¬ШЄЩ…Ш№ Ш§Щ„Щ…ШµШ§ШЇШ± Ш§Щ„Щ…ЩЃШЄЩ€Ш­Ш©Шџ ЩѓЩ† Ш¬ШІШЎШ§Щ‹ Щ…Щ† Ш№Ш§Щ„Щ… Ш§Щ„ШЁШ±Щ…Ш¬ЩЉШ§ШЄ "
-"Ш§Щ„Ш­Ш±Ш©"
+msgid "Please check for multisession CD"
+msgstr "ЩЃШ¶Щ„Ш§ Щ‚Щ… ШЁШ§Щ„ШЄШЈШґЩЉШ± Щ‡Щ†Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШіШЄШ®ШЇЩ… Щ‚Ш±Шµ Щ…ШЇЩ…Ш¬ Щ…ШЄШ№ШЇШЇ Ш§Щ„Ш¬Щ„ШіШ§ШЄ"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "user"
+msgstr "Ш§Щ„Щ…ШіШЄШ®ШЇЩ…"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 ЩЉЩ…ЩѓЩ‘Щ†Щѓ Щ…Щ† Ш§ШіШЄШ®ШЇШ§Щ… ШўШ®Ш± Ш§ШµШЇШ§Ш±Ш§ШЄ Ш§Щ„ШЁШ±Ш§Щ…Ш¬ Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ "
-"Ш§Щ„ШµЩ€ШЄЩЉШ©, Щ€ ШЄШ­Ш±ЩЉШ± Ш§Щ„ШµЩ€Ш±, Щ€ ШЄШґШєЩЉЩ„ Щ…Щ„ЩЃШ§ШЄ Ш§Щ„ЩЃЩЉШЇЩЉЩ€"
+msgid "Use Hard Disk to backup"
+msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉ"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Configure"
+msgstr "ШҐШ№ШЇШ§ШЇ"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Scannerdrake"
+msgstr "Scannerdrake"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
-
-#: ../../share/advertising/04-configuration.pl:1
-#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "ШЄЩ‡ЩЉШ¦Ш© Ш®Ш§ШЇЩ… Ш·Ш±ЩЃЩЉШ§ШЄ Mandrake"
-
-#: ../../share/advertising/05-desktop.pl:1
-#, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"ЩЉЩ€ЩЃШ± Mandrake Linux 9.1 11 Щ€Ш§Ш¬Щ‡Ш© Ш§ШіШЄШ®ШЇШ§Щ… ЩЉЩ…ЩѓЩ† ШЄШ№ШЇЩЉЩ„Щ‡Ш§ ЩѓШ§Щ…Щ„Ш©Щ‹: ЩѓЩЉШЇЩЉ 3, Ш¬Щ†Щ€Щ… 2, "
-"WindowsMaker, ..."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
+msgstr "ШЄШ­Ш°ЩЉШ±, ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ Ш§ШЄШµШ§Щ„ ШҐЩ†ШЄШ±Щ†ШЄ ШўШ®Ш±, Ш±ШЁЩ…Ш§ ЩЉЩѓЩ€Щ† ЩЉШіШЄШ®ШЇЩ… ШґШЁЩѓШЄЩѓ"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Backup Users"
+msgstr "Щ…ШіШЄШ®ШЇЩ…Щ€ Ш§Щ„Щ…ШіШ§Ш№ШЇ"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"ЩЃШ¶Щ„Ш§Щ‹ ШЈШЇШ®Щ„ Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ.\n"
+"ЩЉШ¬ШЁ ШЈЩ† ЩЉЩѓЩ€Щ† Ш§ШіЩ… Ш§Щ„Щ…ШіШЄШ¶ЩЉЩЃ ШµШ§Щ„Ш­Ш§Щ‹ Щ€ ЩѓШ§Щ…Щ„Ш§Щ‹,\n"
+"Щ…Ш«Щ„ ``mybox.mylab.myco.com''.\n"
+"ЩЉЩ…ЩѓЩ†Щѓ ШЈЩЉШ¶Ш§Щ‹ Ш§ШЇШ®Ш§Щ„ Ш№Щ†Щ€Ш§Щ† IP Ш§Щ„Ш®Ш§Шµ ШЁШ§Щ„ШЁЩ€Ш§ШЁШ© Ш§Щ† Щ€ЩЏШ¬ШЇШЄ."
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 Щ‡ЩЉ Ш§Щ„ШЁЩЉШ¦Ш© Ш§Щ„ШЈЩ…Ш«Щ„ Щ„ШЄШ·Щ€ЩЉШ± Ш§Щ„ШЁШ±Ш§Щ…Ш¬"
+msgid "Select Printer Spooler"
+msgstr "Ш§Ш®ШЄШ± Printer Spooler"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
-msgstr ""
-"Ш­Щ€Щ‘Щ„ Ш¬Щ‡Ш§ШІЩѓ Ш§Щ„Щ‰ Ш®Ш§ШЇЩ… Щ„ЩЉЩ†ЩѓШі Щ‚Щ€ЩЉ ШЁЩ†Щ‚Ш±Ш§ШЄ Щ‚Щ„ЩЉЩ„Ш© Щ…Щ† Ш§Щ„ЩЃШЈШ±Ш©: Ш®Ш§ШЇЩ… Щ€ЩЉШЁ, ШЁШ±ЩЉШЇ, Ш¬ШЇШ§Ш± "
-"Щ†Ш§Ш±ЩЉ, Щ…Щ€Ш¬Щ‘Щ‡, Ш®Ш§ШЇЩ… Щ…Щ„ЩЃШ§ШЄ Щ€ Ш·ШЁШ§Ш№Ш©, ..."
+msgid "Create new theme"
+msgstr "Ш§Щ†ШґШ¦ ШіЩ…Ш© Ш¬ШЇЩЉШЇШ©"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Ш§Ш¬Ш№Щ„ Ш¬Щ‡Ш§ШІЩѓ Ш®Ш§ШЇЩ…Ш§Щ‹ ЩЉШ№ШЄЩ…ШЇ Ш№Щ„ЩЉЩ‡"
+msgid "Mandrake Tools Explanation"
+msgstr "ШґШ±Щ€Ш­ ШЈШЇЩ€Ш§ШЄ Mandrake"
 
-#: ../../share/advertising/08-store.pl:1
+#
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
-"Ш®ЩЉШ§Ш±Ш§ШЄЩ†Ш§ Ш§Щ„ЩѓШ«ЩЉШ± Щ…Щ† Ш­Щ„Щ€Щ„ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі ШЁШ§Щ„ШҐШ¶Ш§ЩЃШ© Ш§Щ„Щ‰ Ш§Щ„Ш№Ш±Щ€Ш¶ Ш§Щ„Ш®Ш§ШµШ© Щ€ Ш§Щ„Щ…Щ†ШЄШ¬Ш§ШЄ "
-"Ш§Щ„ШЈШ®Ш±Щ‰Щ‰ Щ…ШЄЩ€ЩЃШ±Ш© ЩЃЩЉ Щ…ШЄШ¬Ш±Щ†Ш§ Ш§Щ„ШЈЩ„ЩѓШЄШ±Щ€Щ†ЩЉ:"
+msgid "No image found"
+msgstr "ШЄШ№Ш°Ш± Ш§ЩЉШ¬Ш§ШЇ ШµЩ€Ш±Ш©"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Щ…ШЄШ¬Ш± MandrakeSoft Ш§Щ„Ш±ШіЩ…ЩЉ"
-
-#: ../../share/advertising/09-mdksecure.pl:1
-#, fuzzy, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
-"MandrakeSoft ШЄШ№Щ…Щ„ Ш¬Щ†ШЁШ§Щ‹ Ш§Щ„Щ‰ Ш¬Щ†ШЁ Щ…Ш№ ШЈЩЃШ¶Щ„ Ш§Щ„ШґШ±ЩѓШ§ШЄ Ш§Щ„ШЄЩЉ ШЄЩ€ЩЃШ± Ш­Щ„Щ€Щ„ Щ„Ш­ШЄШ±Ш§ЩЃЩЉШ© "
-"Щ…ШЄЩ€Ш§ЩЃЩ‚Ш© Щ…Ш№ Mandrake Linux. ШЄЩ€Ш¬ШЇ Щ‚Ш§Ш¦Щ…Ш© ШЁЩ‡Ш¤Щ„Ш§ШЎ Ш§Щ„ШґШ±ЩѓШ§ШЎ ЩЃЩЉ MandrakeStore"
+"Щ„Щ… ЩЉШЄЩ… ШЄШ«ШЁЩЉШЄ ШЁШ№Ш¶ Ш§Щ„Ш­ШІЩ… Ш§Щ„Щ…Щ‡Щ…Ш© ШЁШґЩ„ ШµШ­ЩЉШ­.\n"
+"ШҐЩ…Ш§ ШЈЩ† ШіЩ€Ш§Щ‚Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ ШЈЩ€ ШЈЩ† Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Щ†ЩЃШіЩ‡ ШЁЩ‡ Ш№ЩЉШЁ Щ…Ш§.\n"
+"ШЄШЈЩѓШЇ Щ…Щ† ШµШ­Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„Щ…ШЇЩ…Ш¬ Ш№Щ„Щ‰ ЩѓЩ…ШЁЩЉЩ€ШЄШ± Щ…Ш«ШЁЩ‘ШЄ ШЁШ§ШіШЄШ®ШЇШ§Щ… Ш§Щ„ШЈЩ…Ш± \"rpm -qpl Mandrake/"
+"RPMS/*.rpm\"\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+msgid "Detected model: %s"
+msgstr "ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ Ш§Щ„Ш·Ш±Ш§ШІ: %s"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
+"Щ…ШЇЩЉШ± Ш№Ш±Ш¶ X11 ЩЉШіЩ…Ш­ Щ„Щѓ ШЁШЄШіШ¬ЩЉЩ„ Ш§Щ„ШЇШ®Щ€Щ„ Ш§Щ„Щ‰\n"
+"Щ†ШёШ§Щ…Щѓ Щ…Ш№ ШЄШґШєЩЉЩ„ Ш®Ш§ШЇЩ… Ш§Щ„Щ†Щ€Ш§ЩЃШ° X Щ€ ЩЉШЇШ№Щ… ШЄШґШєЩЉЩ„\n"
+"Ш№ШЇШ© Ш¬Щ„ШіШ§ШЄ X Щ…Ш®ШЄЩ„ЩЃШ© Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ€Щ‚ШЄ."
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Ш­ШіЩ‘Щ† Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
+msgid "if set to yes, run the daily security checks."
+msgstr "if set to yes, run the daily security checks"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Щ‡Ш°Ш§ Ш§Щ„Щ…Щ†ШЄШ¬ Щ…ШЄЩ€ЩЃШ± Ш№Щ„Щ‰ Щ…Щ€Щ‚Ш№ MandrakeStore"
+msgid "Azerbaijan"
+msgstr "ШЈШ°Ш±ШЁЩЉШ¬Ш§Щ†"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
-msgstr ""
+msgid "No tape in %s!"
+msgstr "Щ„Ш§ ЩЉЩ€Ш¬ШЇ ШґШ±ЩЉШ· ЩЃЩЉ %s!"
 
-#: ../../share/advertising/11-mnf.pl:1
+# U+200F (RTL mark) has been inserted between "Dvorak" and "(US)", so
+# it displays on screen as "(US) Dvorak", following the same schema
+# as others "Dvorak (xxxx)" with xxx in Arabic that display as "(xxxx) Dvorak"
+# that way the entry is also listed together with the other "Dvorak" entries.
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak‏ (US)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
-"Ш§Щ„ШЄШ­Щ‚ ШЁЩЃШ±ЩЉЩ‚ Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ ЩЃЩЉ MandrakeSoft Щ€ Щ…Ш¬ШЄЩ…Ш№ Щ„ЩЉЩ†ЩѓШі Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ„Щ…ШґШ§Ш±ЩѓШ© "
-"Щ…Ш№Щ„Щ€Щ…Ш§ШЄЩѓ Щ€ Щ…ШіШ§Ш№ШЇШ© Ш§Щ„ШўШ®Ш±ЩЉЩ† ШЁШЈЩ† ШЄШµШЁШ­ Ш®ШЁЩЉШ±Ш§Щ‹ Щ…Ш№ШЄЩ…ЩЋШЇШ§Щ‹ ЩЃЩЉ Щ…Щ€Щ‚Ш№Щ†Ш§ Щ„Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Ш№Щ„Щ‰ "
-"Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
-"Ш§Ш№Ш«Ш± Ш№Щ„Щ‰ Ш­Щ„Щ€Щ„ Щ„Щ…ШґШ§ЩѓЩ„Щѓ ШЁШ§ШіШЄШ®ШЇШ§Щ… ШЁЩЉШ¦Ш© Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ЩЃЩЉ MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "Щ…Ш§ Щ‡ЩЉ Ш·Ш±ЩЉЩ‚Ш© ШЄЩ€ШµЩЉЩ„ Ш§Щ„Ш·Ш§ШЁШ№Ш©Шџ"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Become a MandrakeExpert"
-msgstr "ЩѓЩ† Ш®ШЁЩЉШ±Ш§Щ‹ ЩЃЩЉ MandrakeExpert"
+msgid "Security level"
+msgstr "Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr "ЩѓЩ„ Щ…ШґЩѓЩ„Ш© ШіЩЉШЄЩ… ШЄШЄШЁШ№Щ‡Ш§ Щ…Щ† Ш®ШЁЩЉШ± Щ€Ш§Ш­ШЇ Щ…Ш№ШЄЩ…ШЇ Щ…Щ† MandrakeSoft."
+msgid "final resolution"
+msgstr "ШЇЩ‚Ш© Ш§Щ„Ш№Ш±Ш¶ Ш§Щ„Щ†Щ‡Ш§Ш¦ЩЉШ©"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr "ШЁЩЉШ¦Ш© Ш№Щ„Щ‰ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ„Щ„ШҐШіШЄШ¬Ш§ШЁШ© Щ„Ш§Ш­ШЄЩЉШ§Ш¬Ш§ШЄ Ш§Щ„ШЇШ№Щ… Ш§Щ„ЩЃЩ†ЩЉ Щ„Щ„ШґШ±ЩѓШ§ШЄ"
+msgid "Services"
+msgstr "Ш§Щ„Ш®ШЇЩ…Ш§ШЄ"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert Щ„Щ„ШґШ±ЩѓШ§ШЄ"
+msgid "4 MB"
+msgstr "4 Щ…ЩЉШєШ§ШЁШ§ЩЉШЄ"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -18720,10 +18786,6 @@ msgstr ""
 "gnumeric) , ШЁШ±Ш§Щ…Ш¬ Ш№Ш±Ш¶ pdf, Ш§Щ„Ш®"
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Щ…Ш­Ш·Ш© Ш№Щ…Щ„"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Щ…Ш­Ш·Ш© ШЈЩ„Ш№Ш§ШЁ"
 
@@ -18795,10 +18857,6 @@ msgstr ""
 "ШЁЩЉШ¦Ш© ШіШ·Ш­ Щ…ЩѓШЄШЁ ЩѓЩЉШЇЩЉ, Ш§Щ„ШЁЩЉШ¦Ш© Ш§Щ„Ш±ШіЩ€Щ…ЩЉШ© Ш§Щ„ШЈШіШ§ШіЩЉШ© Щ…Ш№ Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш§Щ„ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…ШµШ§Ш­ШЁШ©"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "ШЁЩЉШ¦Ш§ШЄ Ш±ШіЩ€Щ…ЩЉШ©"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Щ…Ш­Ш·Ш© Ш№Щ…Щ„ Ш¬Щ†Щ€Щ…"
 
@@ -18819,10 +18877,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, Ш§Щ„Ш®"
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "ШЄШ·Щ€ЩЉШ±"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "ШЁШ±Ш§Щ…Ш¬ Щ€ Щ…ЩѓШЄШЁШ§ШЄ ШЄШ·Щ€ЩЉШ± C Щ€ C++"
 
@@ -18892,40 +18946,523 @@ msgstr "Ш®Ш§ШЇЩ… NFS, Ш®Ш§ШЇЩ… SMB, Ш®Ш§ШЇЩ… ШЁШ±Щ€ЩѓШіЩЉ, Ш®Ш§ШЇЩ… ssh"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Щ…Ш­Ш·Ш© Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ©"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш§Щ„ШЈШЇЩ€Ш§ШЄ Щ„Щ‚Ш±Ш§ШЎШ© Щ€ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ Щ€ Ш§Щ„ШЈШ®ШЁШ§Ш± (pine, mutt, tin..) Щ€ "
+"Щ„ШЄШµЩЃШ­ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Щ€ШµЩ„Ш© Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Щ€ Ш§Щ„ШҐШ№ШЇШ§ШЇШ§ШЄ"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Щ‚Щ… ШЁШҐШ№ШЇШ§ШЇ Ш§Щ„ШҐШЄШµШ§Щ„"
+
+#~ msgid "Disconnect"
+#~ msgstr "Ш§Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„"
+
+#~ msgid "Connect"
+#~ msgstr "Ш§ШЄШµЩ„"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШўЩ† Ш§Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "ШЈЩ†ШЄ Щ„ШіШЄ Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш­Ш§Щ„ЩЉШ§Щ‹"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "ЩЉЩ…ЩѓЩ†Щѓ Щ‚Ш·Ш№ Ш§Щ„ШҐШЄШµШ§Щ„ ШЈЩ€ Ш§Ш№Ш§ШЇШ© ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ€ШµЩ„Ш©."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ШЈЩ†ШЄ Щ…ШЄШµЩ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ Ш­Ш§Щ„ЩЉШ§Щ‹"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "Ш§Ш±ШіШ§Щ„ Ш§Щ„Щ…Щ„ЩЃШ§ШЄ Ш№Щ† Ш·Ш±ЩЉЩ‚ FTP"
+
+#~ msgid "Use incremental backup  (do not replace old backups)"
+#~ msgstr "Ш§ШіШЄШ®ШЇЩ… Ш§Щ„Щ†ШіШ® Ш§Щ„ШЄШ±Ш§ЩѓЩ…ЩЉ (Щ„Ш§ ШЄШіШЄШЁШЇЩ„ Ш§Щ„Щ†ШіШ® Ш§Щ„ШҐШ­ШЄЩЉШ§Ш·ЩЉШ© Ш§Щ„Щ‚ШЇЩЉЩ…Ш©)"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "ШЈШ№ШЇ ШЄШґШєЩЉЩ„ 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Ш§Ш¬Ш№Щ„ initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Ш§ЩѓШЄШЁ %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Ш§Щ†ШіШ® %s Ш§Щ„Щ‰ %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Ш§Щ†ШіШ® %s Ш§Ш­ШЄЩЉШ§Ш·ЩЉШ§Щ‹ Ш§Щ„Щ‰ %s.old"
+
+#~ msgid "ttf fonts conversion"
+#~ msgstr "ШЄШ­Щ€ЩЉЩ„ Ш®Ш·Щ€Ш· ttf"
+
+#~ msgid "Fonts conversion"
+#~ msgstr "ШЄШ­Щ€ЩЉЩ„ Ш§Щ„Ш®Ш·Щ€Ш·"
+
+#~ msgid ""
+#~ "Choose the hard drive you want to erase in order to install your new\n"
+#~ "Mandrake Linux partition. Be careful, all data present on it will be "
+#~ "lost\n"
+#~ "and will not be recoverable!"
+#~ msgstr ""
+#~ "Ш§Ш®ШЄШ± Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Ш§Щ„Ш°ЩЉ ШЄШ±ЩЉШЇ Щ…Ш­Щ€Щ‡ Щ„ШЄШ«ШЁЩЉШЄ ШЄШ¬ШІШ¦Ш©\n"
+#~ "Mandrake Linux Ш§Щ„Ш¬ШЇЩЉШЇШ©. Ш®Ш° Ш­Ш°Ш±Щѓ, ЩѓЩ„ Ш§Щ„ШЁЩЉШ§Щ†Ш§ШЄ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Ш№Щ„ЩЉЩ‡ ШіШЄШ¶ЩЉШ№\n"
+#~ "Щ€ Щ„Щ† ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ№Ш§ШЇШЄЩ‡Ш§!"
+
+#~ msgid ""
+#~ "\"Sound card\": if a sound card is detected on your system, it is "
+#~ "displayed\n"
+#~ "here. If you notice the sound card displayed is not the one that is\n"
+#~ "actually present on your system, you can click on the button and choose\n"
+#~ "another driver."
+#~ msgstr ""
+#~ "\"ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ\": Ш§Ш°Ш§ ШЄЩ… Ш§ЩѓШЄШґШ§ЩЃ ШЁШ·Ш§Щ‚Ш© ШµЩ€ШЄ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ШіЩЉШЄЩ… Ш№Ш±Ш¶Щ‡Ш§\n"
+#~ "Щ‡Щ†Ш§. Ш§Ш°Ш§ Щ„Ш§Ш­ШёШЄ ШЈЩ† ШЁШ·Ш§Щ‚Ш© Ш§Щ„ШµЩ€ШЄ Ш§Щ„Щ…Ш№Ш±Щ€Ш¶Ш© Щ‡Щ†Ш§ Щ„ЩЉШіШЄ ШЄЩ„Щѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ©\n"
+#~ "ЩЃШ№Щ„Ш§Щ‹ Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ Ш§Щ„ШІШ± Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШґШєЩ„\n"
+#~ "ШўШ®Ш±."
+
+#~ msgid ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ "         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+#~ msgstr ""
+#~ "You can add additional entries in yaboot for other operating systems,\n"
+#~ "alternate kernels, or for an emergency boot image.\n"
+#~ "\n"
+#~ "For other OSs, the entry consists only of a label and the \"root\"\n"
+#~ "partition.\n"
+#~ "\n"
+#~ "For Linux, there are a few possible options:\n"
+#~ "\n"
+#~ " * Label: this is the name you will have to type at the yaboot prompt to\n"
+#~ "select this boot option.\n"
+#~ "\n"
+#~ " * Image: this would be the name of the kernel to boot. Typically, "
+#~ "vmlinux\n"
+#~ "or a variation of vmlinux with an extension.\n"
+#~ "\n"
+#~ " * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+#~ "\n"
+#~ " * Append: on Apple hardware, the kernel append option is often used to\n"
+#~ "assist in initializing video hardware, or to enable keyboard mouse "
+#~ "button\n"
+#~ "emulation for the missing 2nd and 3rd mouse buttons on a stock Apple "
+#~ "mouse.\n"
+#~ "The following are some examples:\n"
+#~ "\n"
+#~ "         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+#~ "hda=autotune\n"
+#~ "\n"
+#~ "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+#~ "\n"
+#~ " * Initrd: this option can be used either to load initial modules before\n"
+#~ "the boot device is available, or to load a ramdisk image for an "
+#~ "emergency\n"
+#~ "boot situation.\n"
+#~ "\n"
+#~ " * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If "
+#~ "you\n"
+#~ "need to allocate a large ramdisk, this option can be used to specify a\n"
+#~ "ramdisk larger than the default.\n"
+#~ "\n"
+#~ " * Read-write: normally the \"root\" partition is initially mounted as\n"
+#~ "read-only, to allow a file system check before the system becomes "
+#~ "``live''.\n"
+#~ "You can override the default with this option.\n"
+#~ "\n"
+#~ " * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+#~ "problematic, you can select this option to boot in ``novideo'' mode, "
+#~ "with\n"
+#~ "native frame buffer support.\n"
+#~ "\n"
+#~ " * Default: selects this entry as being the default Linux selection,\n"
+#~ "selectable by pressing ENTER at the yaboot prompt. This entry will also "
+#~ "be\n"
+#~ "highlighted with a ``*'' if you press [Tab] to see the boot selections."
+
+#~ msgid ""
+#~ "DrakX will first detect any IDE devices present in your computer. It "
+#~ "will\n"
+#~ "also scan for one or more PCI SCSI cards on your system. If a SCSI card "
+#~ "is\n"
+#~ "found, DrakX will automatically install the appropriate driver.\n"
+#~ "\n"
+#~ "Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+#~ "your hard drives. If so, You'll have to specify your hardware by hand.\n"
+#~ "\n"
+#~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
+#~ "you\n"
+#~ "want to configure options for it. You should allow DrakX to probe the\n"
+#~ "hardware for the card-specific options which are needed to initialize "
+#~ "the\n"
+#~ "adapter. Most of the time, DrakX will get through this step without any\n"
+#~ "issues.\n"
+#~ "\n"
+#~ "If DrakX is not able to probe for the options to automatically determine\n"
+#~ "which parameters need to be passed to the hardware, you'll need to "
+#~ "manually\n"
+#~ "configure the driver."
+#~ msgstr ""
+#~ "ШіЩЉЩ‚Щ€Щ… DrakX ШЈЩ€?Щ‹ ШЁШ§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Щ€Ш¬Щ€ШЇ ШЈШ¬Щ‡ШІШ© IDE Ш№Щ„Щ‰ Щ‡Ш°Ш§ Ш§Щ„ЩѓЩ…ШЁЩЉЩ€ШЄШ±. ШіЩЉЩ‚Щ€Щ…\n"
+#~ "ШЈЩЉШ¶Ш§Щ‹ ШЁШ§Щ„ШЁШ­Ш« Ш№Щ† ШЁШ·Ш§Щ‚Ш§ШЄ PCI SCSI Ш№Щ„Щ‰ Щ†ШёШ§Щ…Щѓ. Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЁШ·Ш§Щ‚Ш©\n"
+#~ "SCSI,ШіЩЉЩ‚Щ€Щ… DrakX ШЁШЄШ«ШЁЩЉШЄ Ш§Щ„Щ…ШґШєЩ„ Ш§Щ„Щ…Щ†Ш§ШіШЁ ШЈЩ€ШЄЩ€Щ…Ш§ШЄЩЉЩѓЩЉШ§Щ‹.\n"
+#~ "\n"
+#~ "Щ€ ?Щ† Ш№Щ…Щ„ЩЉШ© Ш§Щ„ШЄШ­Щ‚Щ‚ Щ…Щ† Ш§Щ„Ш№ШЄШ§ШЇ Щ„ЩЉШіШЄ Ш®Ш§Щ„ЩЉШ© Щ…Щ† Ш§?Ш®Ш·Ш§ШЎ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШіШ¤Ш§Щ„Щѓ Ш№Щ…Щ‘Ш§ "
+#~ "Ш§Ш°Ш§\n"
+#~ "ЩѓШ§Щ†ШЄ Щ„ШЇЩЉЩѓ ШЁШ·Ш§Щ‚Ш© PCI SCSI. Ш§Щ„Щ†Щ‚Ш± Ш№Щ„Щ‰ \"Щ†Ш№Щ…\" ШіЩЉШ№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁШЁШ·Ш§Щ‚Ш§ШЄ SCSI\n"
+#~ "Щ„ШЄШ®ШЄШ§Ш± Щ…Щ†Щ‡Ш§. Ш§Щ†Щ‚Ш± \"?\" Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ№Щ„Щ… ШЈЩ†Щ‡ ? ШЄЩ€Ш¬ШЇ ШЁШ·Ш§Щ‚Ш§ШЄ SCSI Ш№Щ„Щ‰\n"
+#~ "Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† Щ…ШЄШЈЩѓШЇШ§Щ‹, ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш§Щ„ШЄЩЉ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇЩ‡Ш§\n"
+#~ "Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Ш®ШЄЩЉШ§Ш± \"Ш№Ш±Ш¶ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Ш§Щ„Ш№ШЄШ§ШЇ\" Щ€ Щ†Щ‚Ш±\n"
+#~ "\"Ш§Щ„ШЄШ§Щ„ЩЉ->\". ШЄШЈЩѓШЇ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Ш§Щ„Ш№ШЄШ§ШЇ Ш«Щ… Ш§Ш¶ШєШ· Ш№Щ„Щ‰ ШІШ± \"Ш§Щ„ШЄШ§Щ„ЩЉ\n"
+#~ "->\" Щ„Щ„Ш№Щ€ШЇШ© Ш§Щ„Щ‰ ШґШ¤Ш§Щ„ Щ€Ш§Ш¬Щ‡Ш© SCSI.\n"
+#~ "\n"
+#~ "Ш§Ш°Ш§ Ш§Ш¶Ш·Ш±Ш±ШЄ Ш§Щ„Щ‰ ШЄШ­ШЇЩЉШЇ Щ…Щ€Ш§Ш¦Щ… PCI SCSI ЩЉШЇЩ€ЩЉШ§Щ‹, ЩЃШіЩЉШіШЈЩ„Щѓ DrakX Ш№Щ…Щ‘Ш§ Ш§Ш°Ш§ ЩѓЩ†ШЄ\n"
+#~ "ШЄШ±ЩЉШЇ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁЩ‡Ш§. ЩЉШ¬ШЁ ШЈЩ† ШЄШіЩ…Ш­ Щ„ЩЂ DrakX ШЁШЈЩ† ЩЉШЄШ­Щ‚Щ‚ Щ…Щ†\n"
+#~ "Ш§Щ„Ш№ШЄШ§ШЇ Щ„Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш®Ш§ШµШ© ШЁШ§Щ„ШЁШ·Ш§Щ‚Ш© Щ€ Ш§Щ„ШЄЩЉ ЩЉЩЊЩЏШ­ШЄШ§Ш¬ Ш§Щ„ЩЉЩ‡Ш§ Щ„ЩЉШЄЩ… ШЁШЇШЎ\n"
+#~ "Ш№Щ…Щ„ Ш§Щ„ШЁШ·Ш§Щ‚Ш©. ЩЃЩЉ ШЈШєЩ„ШЁ Ш§?Щ€Щ‚Ш§ШЄ, ШіЩЉЩ‚Щ€Щ… DrakX ШЁШ§Щ„Ш®Ш·Щ€Ш© ШЇЩ€Щ† ШЈЩЉ\n"
+#~ "Щ…ШґШ§ЩѓЩ„.\n"
+#~ "\n"
+#~ "Ш§Ш°Ш§ Щ„Щ… ЩЉШЄЩ…ЩѓЩ† DrakX Щ…Щ† Ш§Щ„ШЄШ№Ш±ЩЃ Ш№Щ„Щ‰ Ш§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„Ш¶Ш±Щ€Ш±ЩЉШ©Щ„ШЄЩ…Ш±ЩЉШ±Щ‡Ш§\n"
+#~ "Ш§Щ„Щ‰ Ш§Щ„Ш№ШЄШ§ШЇ, ЩЃЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„ ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ ШЄЩ‡ЩЉШ¦Ш©\n"
+#~ "Ш§Щ„Щ…ШґШєЩ‘Щ„ ЩЉШЇЩ€ЩЉШ§Щ‹."
+
+#~ msgid ""
+#~ "After you have configured the general bootloader parameters, the list of\n"
+#~ "boot options that will be available at boot time will be displayed.\n"
+#~ "\n"
+#~ "If there are other operating systems installed on your machine they will\n"
+#~ "automatically be added to the boot menu. You can fine-tune the existing\n"
+#~ "options by clicking \"Add\" to create a new entry; selecting an entry "
+#~ "and\n"
+#~ "clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" "
+#~ "validates\n"
+#~ "your changes.\n"
+#~ "\n"
+#~ "You may also not want to give access to these other operating systems to\n"
+#~ "anyone who goes to the console and reboots the machine. You can delete "
+#~ "the\n"
+#~ "corresponding entries for the operating systems to remove them from the\n"
+#~ "bootloader menu, but you will need a boot disk in order to boot those "
+#~ "other\n"
+#~ "operating systems!"
+#~ msgstr ""
+#~ "ШЁШ№ШЇЩ…Ш§ Щ‚Щ…ШЄ ШЁШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Щ…Ш№Ш§Щ…?ШЄ Ш§Щ„Ш№Ш§Щ…Ш© Щ„Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, ЩЃШіЩЉШЄЩ…\n"
+#~ "Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© Ш®ЩЉШ§Ш±Ш§ШЄ Ш§?Щ‚Щ„Ш§Ш№ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Ш№Щ†ШЇ ШЁШЇШЎ Ш§Щ„ШЄШґШєЩЉЩ„.\n"
+#~ "\n"
+#~ "Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Щ‡Щ†Ш§Щѓ ШЈЩ†ШёЩ…Ш© ШЄШґШєЩЉЩ„ ШЈШ®Ш±Щ‰ Щ…Ш«ШЁШЄШ© Ш№Щ„Щ‰ Щ…Ш§ЩѓЩЉЩ†ШЄЩѓ ЩЃШіЩЉШЄЩ… Ш§Ш¶Ш§ЩЃШЄЩ‡Ш§\n"
+#~ "ШўЩ„ЩЉШ§Щ‹ Ш§Щ„Щ‰ Щ‚Ш§Ш¦Щ…Ш© Ш§?Щ‚Щ„Ш§Ш№. ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„ШЄШ­ЩѓЩ… ШЁШ§Щ„Ш®ЩЉШ§Ш±Ш§ШЄ\n"
+#~ "Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© ШЁЩ†Щ‚Ш± \"Ш§Ш¶ЩЃ\" ?Щ†ШґШ§ШЎ Щ…ШЇШ®Щ„ Ш¬ШЇЩЉШЇ, Щ€ Ш§Ш®ШЄЩЉШ§Ш± Щ…ШЇШ®Щ„ Щ€\n"
+#~ "Щ†Щ‚Ш± \"ШЄШ№ШЇЩЉЩ„\" ШЈЩ€ \"Ш­Ш°ЩЃ\" Щ„ШЄШ№ШЇЩЉЩ„ ШЈЩ€ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ®Щ„. \"Щ…Щ€Ш§ЩЃЩ‚\" ЩЉШЄШЈЩѓШЇ\n"
+#~ "Щ…Щ† ШЄШєЩЉЩЉШ±Ш§ШЄЩѓ.\n"
+#~ "\n"
+#~ "Ш±ШЁЩ…Ш§ ? ШЄШ±ЩЉШЇ ?ЩЉ ШґШ®Шµ ЩЉШЄЩ…ЩѓЩ† Щ…Щ† Ш§Ш№Ш§ШЇШ© ШЄШґШєЩЉЩ„ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЈЩ† ЩЉШіШЄШ·ЩЉШ№\n"
+#~ "Ш§Щ„Щ€ШµЩ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰. ЩЉЩ…ЩѓЩ†Щѓ Ш­Ш°ЩЃ Ш§Щ„Щ…ШЇШ§Ш®Щ„ Ш§Щ„Щ…Щ‚Ш§ШЁЩ„Ш©\n"
+#~ "?Щ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Щ„Ш­Ш°ЩЃЩ‡Ш§ Щ…Щ† Щ‚Ш§Ш¦Щ…Ш© Щ…Ш­Щ…Щ‘Щ„ Ш§?Щ‚Щ„Ш§Ш№, Щ„ЩѓЩ† ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„Ш© ШіШЄШ­ШЄШ§Ш¬ Ш§Щ„Щ‰ "
+#~ "Щ‚Ш±Шµ\n"
+#~ "Щ…Ш±Щ† Щ„Щ„ШҐЩ‚?Ш№ ЩѓЩЉ ШЄШЄЩ…ЩѓЩ† Щ…Щ† Ш§Щ„Щ€ШµЩ€Щ„ Ш§Щ„Щ‰ ШЈЩ†ШёЩ…Ш©\n"
+#~ "Ш§Щ„ШЄШґШєЩЉЩ„ Ш§?Ш®Ш±Щ‰!"
+
+#~ msgid ""
+#~ "Depending on the default language you chose in Section , DrakX will\n"
+#~ "automatically select a particular type of keyboard configuration. "
+#~ "However,\n"
+#~ "you might not have a keyboard that corresponds exactly to your language:\n"
+#~ "for example, if you are an English speaking Swiss person, you may have a\n"
+#~ "Swiss keyboard. Or if you speak English but are located in Quebec, you "
+#~ "may\n"
+#~ "find yourself in the same situation where your native language and "
+#~ "keyboard\n"
+#~ "do not match. In either case, this installation step will allow you to\n"
+#~ "select an appropriate keyboard from a list.\n"
+#~ "\n"
+#~ "Click on the \"More \" button to be presented with the complete list of\n"
+#~ "supported keyboards.\n"
+#~ "\n"
+#~ "If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+#~ "dialog will allow you to choose the key binding that will switch the\n"
+#~ "keyboard between the Latin and non-Latin layouts."
+#~ msgstr ""
+#~ "Ш§Ш№ШЄЩ…Ш§ШЇШ§Щ‹ Ш№Щ„Щ‰ Ш§Щ„Щ„ШєШ© Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§ ЩЃЩЉ Щ‡Ш°Ш§ Ш§Щ„Щ‚ШіЩ…, ШіЩЉЩ‚Щ€Щ… DrakX\n"
+#~ "ШЁШ§Ш®ШЄЩЉШ§Ш± ШЄЩ‡ЩЉШ¦Ш© Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШўЩ„ЩЉШ§Щ‹. Ш№Щ…Щ€Щ…Ш§Щ‹,\n"
+#~ "Ш±ШЁЩ…Ш§ Щ„ЩЉШіШЄ Щ„ШЇЩЉЩѓ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ‚Ш§ШЁЩ„Ш© ШЁШґЩѓЩ„ Щ…ШЁШ§ШґШ± Щ„Щ„ШєШЄЩѓ:\n"
+#~ "Щ…Ш«Щ„Ш§Щ‹ Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Ш№Ш±ШЁЩЉШ§Щ‹ Щ…ШЄЩѓЩ„Щ…Ш§Щ‹ ШЁШ§Щ„Щ„ШєШ© Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ©, Ш±ШЁЩ…Ш§ ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ\n"
+#~ "Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ ШіЩ€ЩЉШіШ±ЩЉШ©. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШЄЩѓЩ„Щ… Ш§?Щ†Ш¬Щ„ЩЉШІЩЉШ© Щ„ЩѓЩ† Щ…Щ€Ш¬Щ€ШЇ ЩЃЩЉ ЩѓЩЉШЁЩѓ, Ш±ШЁЩ…Ш§\n"
+#~ "ШЄШ¬ШЇ Щ†ЩЃШіЩѓ ЩЃЩЉ Щ†ЩЃШі Ш§Щ„Щ…Щ€Щ‚ЩЃ Ш­ЩЉШ« ? ШЄШЄШ·Ш§ШЁЩ‚ Щ„ШєШЄЩѓ Щ…Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­.\n"
+#~ "ЩЃЩЉ Ш§Щ„Ш­Ш§Щ„ШЄЩЉЩ†, ШіШЄШіЩ…Ш­ Щ„Щѓ Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ ШіШЄШіЩ…Ш­ Щ„Щѓ ШЁШ§Ш®ШЄЩЉШ§Ш±\n"
+#~ "Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ…Щ†Ш§ШіШЁШ© Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©.\n"
+#~ "\n"
+#~ "Ш§Щ†Щ‚Ш± ШІШ± \"Ш§Щ„Щ…ШІЩЉШЇ\" Щ„Ш№Ш±Ш¶ Щ‚Ш§Ш¦Щ…Ш© ШЁЩѓЩ„ Щ„Щ€Ш­Ш§ШЄ Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­\n"
+#~ "Ш§Щ„Щ…ШЇШ№Щ€Щ…Ш©.\n"
+#~ "\n"
+#~ "Ш§Ш°Ш§ Ш§Ш®ШЄШ±ШЄ Щ„Щ€Ш­Ш© Щ…ЩЃШ§ШЄЩЉШ­ Щ„Ш­Ш±Щ€ЩЃ ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©, ЩЃШіЩЉШіЩ…Ш­ Щ„Щѓ\n"
+#~ "Щ…Ш±ШЁШ№ Ш§Щ„Ш­Щ€Ш§Ш± Ш§Щ„ШЄШ§Щ„ЩЉ ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Ш®ШЄШµШ§Ш±Ш§ШЄ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ Ш§Щ„ШЄЩЉ\n"
+#~ "ШіШЄШєЩЉШ± Щ€Ш¶Ш№ Щ„Щ€Ш­Ш© Ш§Щ„Щ…ЩЃШ§ШЄЩЉШ­ ШЁЩЉЩ† Ш§Щ„Ш­Ш±Щ€ЩЃ Ш§Щ„Щ„Ш§ШЄЩЉЩ†ЩЉШ© Щ€ Ш§Щ„ШєЩЉШ± ?ШЄЩЉЩ†ЩЉШ©."
+
+#~ msgid ""
+#~ "This step is activated only if an old GNU/Linux partition has been found "
+#~ "on\n"
+#~ "your machine.\n"
+#~ "\n"
+#~ "DrakX now needs to know if you want to perform a new install or an "
+#~ "upgrade\n"
+#~ "of an existing Mandrake Linux system:\n"
+#~ "\n"
+#~ " * \"Install\": For the most part, this completely wipes out the old\n"
+#~ "system. If you wish to change how your hard drives are partitioned, or\n"
+#~ "change the file system, you should use this option. However, depending "
+#~ "on\n"
+#~ "your partitioning scheme, you can prevent some of your existing data "
+#~ "from\n"
+#~ "being over- written.\n"
+#~ "\n"
+#~ " * \"Upgrade\": this installation class allows you to update the "
+#~ "packages\n"
+#~ "currently installed on your Mandrake Linux system. Your current\n"
+#~ "partitioning scheme and user data is not altered. Most of other\n"
+#~ "configuration steps remain available, similar to a standard "
+#~ "installation.\n"
+#~ "\n"
+#~ "Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+#~ "running version \"8.1\" or later. Performing an Upgrade on versions "
+#~ "prior\n"
+#~ "to Mandrake Linux version \"8.1\" is not recommended."
+#~ msgstr ""
+#~ "ЩЉШЄЩ… ШЄЩ†ШґЩЉШ· Щ‡Ш°Щ‡ Ш§Щ„Ш®Ш·Щ€Ш© ЩЃЩ‚Ш· Ш§Ш°Ш§ ШЄЩ… Ш§ЩЉШ¬Ш§ШЇ ШЄШ¬ШІШ¦Ш© Щ„ЩЉЩ†ЩѓШі Щ‚ШЇЩЉЩ…Ш©\n"
+#~ "Ш№Щ„Щ‰ Ш¬Щ‡Ш§ШІЩѓ.\n"
+#~ "\n"
+#~ "ЩЉШ­ШЄШ§Ш¬ DrakX Ш§?Щ† Ш§Щ„Щ‰ ШЈЩ† ЩЉШ№Щ„Щ… Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ…Щ† Ш§Щ„ШµЩЃШ± ШЈЩ€\n"
+#~ "ШЄШ±ЩЉШЇ ШЄШ±Щ‚ЩЉШ© Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Щ…Щ€Ш¬Щ€ШЇ Щ„ШЇЩЉЩѓ Щ…ШіШЁЩ‚Ш§Щ‹:\n"
+#~ "\n"
+#~ " * \"ШЄШ«ШЁЩЉШЄ\": ЩЃЩЉ Ш§?ШєЩ„ШЁ ШЄЩ‚Щ€Щ… ШЁШ§ШІШ§Щ„Ш© Ш§Щ„Щ†ШёШ§Щ… Ш§Щ„Щ‚ШЇЩЉЩ…\n"
+#~ "ЩѓЩ„ЩЉШ§Щ‹. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ ШЄШєЩЉЩЉШ± ШЄШ¬ШІШ¦Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ, ШЈЩ€ ШЄШ±ЩЉШЇ\n"
+#~ "ШЄШєЩЉЩЉШ± Щ†ШёШ§Щ… Ш§Щ„Щ…Щ„ЩЃШ§ШЄ, Ш№Щ„ЩЉЩѓ Ш§Ш®ШЄЩЉШ§Ш± Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш±. Ш№Щ…Щ€Щ…Ш§Щ‹ Ш§Ш№ШЄЩ…Ш§ШЇШ§\n"
+#~ "Ш№Щ„Щ‰ ЩѓЩЉЩЃЩЉШ© ШЄШ¬ШІШ¦Ш© Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ Щ„ШЇЩЉЩѓ. ЩЉЩ…ЩѓЩ†Щѓ Щ…Щ†Ш№ Ш§ШІШ§Щ„Ш© ШЁШ№Ш¶\n"
+#~ "ШЁЩЉШ§Щ†Ш§ШЄЩѓ Ш§Щ„Щ…Щ€Ш¬Щ€ШЇШ© Щ…ШіШЁЩ‚Ш§Щ‹.\n"
+#~ " * \"ШЄШ±Щ‚ЩЉШ©\": ЩЃШ¦Ш© Ш§Щ„ШЄШ«ШЁЩЉШЄ Щ‡Ш°Щ‡ ШЄШіЩ…Ш­ Щ„Щѓ ШЁШЄШ­ШЇЩЉШ« Ш§Щ„Ш­ШІЩ…\n"
+#~ "Ш№Щ„Щ‰ Щ†ШёШ§Щ… Mandrake Linux Ш§Щ„Ш®Ш§Шµ ШЁЩѓ. Щ„Щ† ЩЉШЄЩ… ШЄШєЩЉЩЉШ±\n"
+#~ "ШЁЩЉШ§Щ†Ш§ШЄЩѓ ШЈЩ€ ШЄЩ‚ШіЩЉЩ…Ш§ШЄ Ш§Щ„Щ‚Ш±Шµ Ш§Щ„ШµЩ„ШЁ. ШЈШєЩ„ШЁ Ш®Ш·Щ€Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§?Ш®Ш±Щ‰\n"
+#~ "Щ„Ш§ ШЄШІШ§Щ„ Щ…Щ€Ш¬Щ€ШЇШ©, Щ…Ш«Щ„ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§Щ„Ш§Ш№ШЄЩЉШ§ШЇЩЉ.\n"
+#~ "\n"
+#~ "Ш§ШіШЄШ®ШЇШ§Щ… Ш®ЩЉШ§Ш± ``Ш§Щ„ШЄШ±Щ‚ЩЉШ©'' ЩЉШ¬ШЁ ШЈЩ† ЩЉШ№Щ…Щ„ ШЁШґЩѓЩ„ Ш¬ЩЉШЇ Ш№Щ„Щ‰\n"
+#~ "Ш§ШµШЇШ§Ш±Ш§ШЄ Mandrake Linux \"8.1\" ШЈЩ€ Щ…Ш§ ЩЃЩ€Щ‚. ? ЩЉЩ†ШµШ­ ШЁШ§Щ„ШЄШ±Щ‚ЩЉШ©\n"
+#~ "Щ…Щ† Ш§ШµШ§ШЇШ±Ш§ШЄ Mandrake Linux Щ‚ШЁЩ„ \"8.1\"."
+
+#~ msgid ""
+#~ "At this point, DrakX will allow you to choose the security level desired\n"
+#~ "for the machine. As a rule of thumb, the security level should be set\n"
+#~ "higher if the machine will contain crucial data, or if it will be a "
+#~ "machine\n"
+#~ "directly exposed to the Internet. The trade-off of a higher security "
+#~ "level\n"
+#~ "is generally obtained at the expense of ease of use.\n"
+#~ "\n"
+#~ "If you do not know what to choose, keep the default option."
+#~ msgstr ""
+#~ "Ш№Щ†ШЇ Щ‡Ш°Щ‡ Ш§Щ„Щ†Щ‚Ш·Ш©, ШіЩЉШіЩ…Ш­ Щ„Щѓ DrakX ШЁШ§Ш®ШЄЩЉШ§Ш± Ш§Щ„Щ…ШіШЄЩ€Щ‰ Ш§Щ„ШЈЩ…Щ†ЩЉ Ш§Щ„Ш°ЩЉ ШЄШ±ШєШЁ ШЁЩ‡\n"
+#~ "Щ„Щ‡Ш°Щ‡ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©. ШЁШЇЩЉЩ‡ЩЉШ§Щ‹, ЩЉШ¬ШЁ ШЄШ№ЩЉЩЉЩ† Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ\n"
+#~ "Ш№Ш§Щ„ЩЌ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© ШЄШ­ШЄЩ€ЩЉ Ш№Щ„Щ‰ Щ…Ш№Щ„Щ€Щ…Ш§ШЄ Щ‡Ш§Щ…Ш©, ШЈЩ€ Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш©\n"
+#~ "ШіШЄЩЏШіШЄШ®ШЇЩ… Щ„Щ„ШҐШЄШµШ§Щ„ ШЁШ§Щ„ШҐЩ†ШЄШ±Щ†ШЄ. Ш§Щ† Ш§ШіШЄШ®ШЇШ§Щ… Щ…ШіШЄЩ€Щ‰ ШЈЩ…Щ†ЩЉ Ш№Ш§Щ„ЩЌ ЩЉШЈШЄЩЉ\n"
+#~ "Ш№Ш§ШЇШ© Ш№Щ„Щ‰ Ш­ШіШ§ШЁ ШіЩ‡Щ€Щ„Ш© Ш§Щ„ШҐШіШЄШ®ШЇШ§Щ….\n"
+#~ "\n"
+#~ "Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ШЄШ±ЩЉШЇ Ш§Щ„ШҐШ®ШЄЩЉШ§Ш±, Ш§Ш­ЩЃШё Ш§Щ„Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШҐЩЃШЄШ±Ш§Ш¶ЩЉ."
+
+#~ msgid ""
+#~ "Monitor\n"
+#~ "\n"
+#~ "   The installer can normally automatically detect and configure the\n"
+#~ "monitor connected to your machine. If it is not the case, you can choose "
+#~ "in\n"
+#~ "this list the monitor you actually own."
+#~ msgstr ""
+#~ "Ш§Щ„ШґШ§ШґШ©\n"
+#~ "\n"
+#~ "   ЩЉЩ…ЩѓЩ† Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„ШЄШ«ШЁЩЉШЄ Ш§ЩѓШЄШґШ§ЩЃ Щ€ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШ§ШґШ© Ш§Щ„Щ…ШЄШµЩ„Ш© ШЁЩ…Ш§ЩѓЩЉЩ†ШЄЩѓ\n"
+#~ "ШўЩ„ЩЉШ§Щ‹. Ш§Щ† Щ„Щ… ЩЉШµЩ„ Ш°Щ„Щѓ, ЩЉЩ…ЩѓЩ†Щѓ Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШґШ§ШґШ© Ш§Щ„ШЄЩЉ Щ„ШЇЩЉЩѓ\n"
+#~ "Щ…Щ† Ш§Щ„Щ‚Ш§Ш¦Щ…Ш©."
+
+#~ msgid ""
+#~ "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+#~ "local time according to the time zone you selected. If the clock on your\n"
+#~ "motherboard is set to local time, you may deactivate this by unselecting\n"
+#~ "\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
+#~ "system clock and the hardware clock are in the same timezone. This is\n"
+#~ "useful when the machine also hosts another operating system like "
+#~ "Windows.\n"
+#~ "\n"
+#~ "The \"Automatic time synchronization \" option will automatically "
+#~ "regulate\n"
+#~ "the clock by connecting to a remote time server on the Internet. For "
+#~ "this\n"
+#~ "feature to work, you must have a working Internet connection. It is best "
+#~ "to\n"
+#~ "choose a time server located near you. This option actually installs a "
+#~ "time\n"
+#~ "server that can used by other machines on your local network."
+#~ msgstr ""
+#~ "ЩЉЩ‚Щ€Щ… Щ„ЩЉЩ†ЩѓШі ШЁШҐШЇШ§Ш±Ш© Ш§Щ„Щ€Щ‚ШЄ Ш­ШіШЁ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ Ш«Щ… ЩЉШЄШ±Ш¬Щ…Щ‡ Ш§Щ„Щ‰\n"
+#~ "Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ Ш­ШіШЁ Ш§Щ„Щ…Щ†Ш·Щ‚Ш© Ш§Щ„ШІЩ…Щ†ЩЉШ© Ш§Щ„ШЄЩЉ Ш§Ш®ШЄШ±ШЄЩ‡Ш§. Ш§Ш°Ш§ ЩѓШ§Щ†ШЄ Ш§Щ„ШіШ§Ш№Ш©\n"
+#~ "Ш§Щ„ШЄЩЉ ЩЃЩЉ Ш§Щ„Щ„Щ€Ш­Ш© Ш§Щ„Ш±Ш¦ЩЉШіЩЉШ© Щ…Ш¶ШЁЩ€Ш·Ш© Ш№Щ„Щ‰ Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ Ш§Щ„Щ…Ш­Щ„ЩЉ, ЩЉЩ…ЩѓЩ†Щѓ Ш§ШІШ§Щ„Ш© ШЄЩ†ШґЩЉШ· Ш°Щ„Щѓ\n"
+#~ "Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§ШІШ§Щ„Ш© Ш§Щ„ШЄШЈШґЩЉШ± Щ…Щ† \"ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Щ…Ш¶ШЁЩ€ШёШ© Ш№Щ„Щ‰ ШЄЩ€Щ‚ЩЉШЄ ШєШ±ЩЉЩ†ШЄШґ\" Щ€ Ш§Щ„ШЄЩЉ "
+#~ "ШіШЄШ¬Ш№Щ„\n"
+#~ "Щ„ЩЉЩ†ЩѓШі ЩЉШ№Щ„Щ… ШЈЩ† ШіШ§Ш№Ш© Ш§Щ„Щ†ШёШ§Щ… Щ€ ШіШ§Ш№Ш© Ш§Щ„Ш¬Щ‡Ш§ШІ Ш№Щ„Щ‰ Щ†ЩЃШі Ш§Щ„ШЄЩ€Щ‚ЩЉШЄ. Щ‡Ш°Ш§\n"
+#~ "Щ…ЩЃЩЉШЇ Ш№Щ†ШЇЩ…Ш§ ШЄШіШЄШ¶ЩЉЩЃ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш© Щ†ШёШ§Щ… ШЄШґШєЩЉЩ„ ШўШ®Ш± Щ…Ш«Щ„ Windows.\n"
+#~ "\n"
+#~ "Ш®ЩЉШ§Ш± \"ШЄШІШ§Щ…Щ† ШўЩ„ЩЉ Щ„Щ„Щ€Щ‚ШЄ\" ШіЩЉЩ‚Щ€Щ… ШўЩ„ЩЉШ§Щ‹ ШЁШ¶ШЁШ· Ш§Щ„ШіШ§Ш№Ш© Ш№Щ† Ш·Ш±ЩЉЩ‚\n"
+#~ "Ш§?ШЄШµШ§Щ„ ШЁШ®Ш§ШЇЩ… Щ€Щ‚ШЄ ШЁШ№ЩЉШЇ Ш№Щ„Щ‰ Ш§?Щ†ШЄШ±Щ†ШЄ. ЩѓЩЉ ШЄШ№Щ…Щ„ Щ‡Ш°Щ‡ Ш§Щ„Щ…ЩЉШІШ©,\n"
+#~ "ЩЉШ¬ШЁ ШЈЩ† ШЄЩѓЩ€Щ† Щ„ШЇЩЉЩѓ Щ€ШµЩ„Ш© Ш§Щ†ШЄШ±Щ†ШЄ Ш№Ш§Щ…Щ„Ш©. Щ…Щ† Ш§?ЩЃШ¶Щ„ Ш§Ш®ШЄЩЉШ§Ш± Ш®Ш§ШЇЩ…\n"
+#~ "Ш§Щ„Щ€Щ‚ШЄ Ш§?Щ‚Ш±ШЁ Ш§Щ„ЩЉЩѓ. Щ‡Ш°Ш§ Ш§Щ„Ш®ЩЉШ§Ш± ЩЉШ«ШЁШЄ Ш®Ш§ШЇЩ… Щ€Щ‚ШЄ\n"
+#~ "ЩЉЩ…ЩѓЩ† Ш§ШіШЄШ®ШЇШ§Щ…Щ‡ Ш№Щ† Ш·Ш±ЩЉЩ‚ Ш§Щ„Щ…Ш§ЩѓЩЉЩ†Ш§ШЄ Ш§?Ш®Ш±Щ‰ Ш№Щ„Щ‰ Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©."
+
+#~ msgid ""
+#~ "You will now set up your Internet/network connection. If you wish to\n"
+#~ "connect your computer to the Internet or to a local network, click "
+#~ "\"Next\n"
+#~ "->\". Mandrake Linux will attempt to autodetect network devices and "
+#~ "modems.\n"
+#~ "If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
+#~ "also choose not to configure the network, or to do it later, in which "
+#~ "case\n"
+#~ "clicking the \"Cancel\" button will take you to the next step.\n"
+#~ "\n"
+#~ "When configuring your network, the available connections options are:\n"
+#~ "traditional modem, ISDN modem, ADSL connection, cable modem, and finally "
+#~ "a\n"
+#~ "simple LAN connection (Ethernet).\n"
+#~ "\n"
+#~ "We will not detail each configuration option - just make sure that you "
+#~ "have\n"
+#~ "all the parameters, such as IP address, default gateway, DNS servers, "
+#~ "etc.\n"
+#~ "from your Internet Service Provider or system administrator.\n"
+#~ "\n"
+#~ "You can consult the ``Starter Guide'' chapter about Internet connections\n"
+#~ "for details about the configuration, or simply wait until your system is\n"
+#~ "installed and use the program described there to configure your "
+#~ "connection."
+#~ msgstr ""
+#~ "ШіШЄЩ‚Щ€Щ… Ш§?Щ† ШЁШҐШ№ШЇШ§ШЇ Щ€ШµЩ„Ш© Ш§?Щ†ШЄШ±Щ†ШЄ/Ш§Щ„ШґШЁЩѓШ© Ш§Щ„Ш®Ш§ШµШ© ШЁЩѓ. Ш§Ш°Ш§ ЩѓЩ†ШЄ ШЄШ±ЩЉШЇ\n"
+#~ "ШЄЩ€ШµЩЉЩ„ Ш¬Щ‡Ш§ШІЩѓ ШЁШ§?Щ†ШЄШ±Щ†ШЄ ШЈЩ€ Щ„Щ„ШґШЁЩѓШ© Ш§Щ„Щ…Ш­Щ„ЩЉШ©, Ш§Щ†Щ‚Ш± \"Ш§Щ„ШЄШ§Щ„ЩЉ ->\"\n"
+#~ "ШіЩЉШ­Ш§Щ€Щ„ Mandrake Linux ШЈЩ† ЩЉШЄШ­Щ‚Щ‚ ШўЩ„ЩЉШ§Щ‹ Щ…Щ† Щ€Ш¬Щ€ШЇ Ш§?Ш¬Щ‡ШІШ© Щ€ Ш§Щ„Щ…Щ€ШЇЩ…Ш§ШЄ.\n"
+#~ "Ш§Ш°Ш§ ЩЃШґЩ„ Ш§Щ„ШЄШ­Щ‚Щ‚, ШЈШІЩ„ Ш§Щ„ШЄШЈШґШЁШ± Щ…Щ† \"Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЄШ­Щ‚Щ‚ Ш§?Щ„ЩЉ\". Ш±ШЁЩ…Ш§ ШЄШ®ШЄШ§Ш±\n"
+#~ "Ш№ШЇЩ… ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©, ШЈЩ€ ШЄШ±ЩЉШЇ ШЈЩ† ШЄЩЃШ№Щ„ Ш°Щ„Щѓ, ЩЃЩЉ Щ‡Ш°Щ‡ Ш§Щ„Ш­Ш§Щ„\n"
+#~ "ЩЃШҐЩ† Ш¶ШєШ· ШІШ± \"Ш§Щ„ШєШ§ШЎ\" ШіЩЉШЈШ®Ш°Щѓ Ш§Щ„Щ‰ Ш§Щ„Ш®Ш·Щ€Ш© Ш§Щ„ШЄШ§Щ„ЩЉШ©.\n"
+#~ "\n"
+#~ "ШЈШ«Щ†Ш§ШЎ ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„ШґШЁЩѓШ©, ЩЃШҐЩ† Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄЩ€ШµЩЉЩ„ Ш§Щ„Щ…ШЄЩ€ЩЃШ±Ш© Щ‡ЩЉ:\n"
+#~ "Щ…Щ€ШЇЩ… ШЄЩ‚Щ„ЩЉШЇЩЉ, Щ…Щ€ШЇЩ… ISDN, Щ€ШµЩ„Ш© ADSL, Щ…Щ€ШЇЩ… ЩѓЩЉШЁЩ„, Щ€ ШЈШ®ЩЉШ±Ш§Щ‹\n"
+#~ "Щ€ШµЩ„Ш© LAN ШЁШіЩЉШ·Ш© (Ш§ЩЉШ«Ш±Щ†ШЄ).\n"
+#~ "\n"
+#~ "Щ„Щ† Щ†Ш°ЩѓШ± ЩѓЩ„ Ш®ЩЉШ§Ш±Ш§ШЄ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш© ШЁШ§Щ„ШЄЩЃШµЩЉЩ„ - ЩЃЩ‚Ш· ШЄШЈЩѓШЇ ШЈЩ†Щ‡ Щ„ШЇЩЉЩѓ\n"
+#~ "ЩѓЩ„ Ш§Щ„Щ…Ш№Ш§Щ…Щ„Ш§ШЄ, Щ…Ш«Щ„ Ш№Щ†Щ€Ш§Щ† IP, Ш§Щ„ШЁЩ€Ш§ШЁШ© Ш§?ЩЃШЄШ±Ш§Ш¶ЩЉШ©, Ш®Ш§ШЇЩ…Ш§ШЄ DNS, Ш§Щ„Ш®.\n"
+#~ "Щ…Щ† Щ…Щ€ЩЃШ± Ш®ШЇЩ…Ш© Ш§?Щ†ШЄШ±Щ†ШЄ ШЈЩ€ Щ…ШЇЩЉШ± Ш§Щ„Щ†ШёШ§Щ….\n"
+#~ "\n"
+#~ "ЩЉЩ…ЩѓЩ†Щѓ Ш§Щ„Ш±Ш¬Щ€Ш№ Ш§Щ„Щ‰ Ш§Щ„ЩЃШµЩ„ Ш§Щ„Ш®Ш§Шµ ШЁШҐШ№ШЇШ§ШЇ Щ€ШµЩ„Ш© Ш§?Щ†ШЄШ±Щ†ШЄ ЩЃЩЉ\n"
+#~ "``ШЇЩ„ЩЉЩ„ Ш§Щ„Щ…ШЁШЄШЇШ¦'' Щ„Щ„ШЄЩЃШ§ШµЩЉЩ„ Ш­Щ€Щ„ Ш§Щ„ШЄЩ‡ЩЉШ¦Ш©, ШЈЩ€ ШЁШЁШіШ§Ш·Ш© Ш§Щ†ШЄШёШ± Ш­ШЄЩ‰ ЩЉШЄЩ…\n"
+#~ "ШЄШ«ШЁЩЉШЄ Ш§Щ„Щ†ШёШ§Щ… Щ€ Ш§ШіШЄШ®ШЇЩ… Ш§Щ„ШЁШ±Щ†Ш§Щ…Ш¬ Ш§Щ„Щ…Ш°ЩѓЩ€Ш± Щ‡Щ†Ш§Щѓ ?Ш№ШЇШ§ШЇ Ш§Щ„Щ€ШµЩ„Ш©."
+
+#~ msgid "Harddrake2 version "
+#~ msgstr "Harddrake2 Ш§Щ„ШҐШµШЇШ§Ш± "
+
+#~ msgid "Author:"
+#~ msgstr "Ш§Щ„Щ…Ш¤Щ„ЩЃ:"
+
+#~ msgid ""
+#~ "This is HardDrake, a Mandrake hardware configuration tool.\n"
+#~ "Version:"
+#~ msgstr ""
+#~ "Щ‡Ш°Ш§ Щ‡Щ€ HardDrake, ШЈШЇШ§Ш© Mandrake Щ„ШЄЩ‡ЩЉШ¦Ш© Ш§Щ„Ш№ШЄШ§ШЇ.\n"
+#~ "Ш§Щ„ШҐШµШЇШ§Ш±:"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "ШЁШ±Ш§Щ…Ш¬ ШЄШ­Ш±ЩЉШ±/ШЄШґШєЩЉЩ„ Ш§Щ„ЩЃЩЉШЇЩЉЩ€ Щ€ Ш§Щ„ШµЩ€ШЄ"
+#~ msgid "Audio station"
+#~ msgstr "Щ…Ш­Ш·Ш© Щ€ШіШ§Ш¦Ш· Щ…ШЄШ№ШЇШЇШ©"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Щ…Ш­Ш·Ш© ШЈЩ„Ш№Ш§ШЁ"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "ШЁШ±Ш§Щ…Ш¬ ШЄШ­Ш±ЩЉШ±/ШЄШґШєЩЉЩ„ Ш§Щ„ЩЃЩЉШЇЩЉЩ€ Щ€ Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "ШЁШ±Ш§Щ…Ш¬ ШЄШ­Ш±ЩЉШ±/ШЄШґШєЩЉЩ„ Ш§Щ„ЩЃЩЉШЇЩЉЩ€ Щ€ Ш§Щ„ШµЩ€ШЄ"
+#~ msgid "Video station"
+#~ msgstr "Щ…Ш­Ш·Ш© ШЈЩ„Ш№Ш§ШЁ"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Щ…Ш­Ш·Ш© ШЈЩ„Ш№Ш§ШЁ"
+#~ msgid "Video playing programs"
+#~ msgstr "ШЁШ±Ш§Щ…Ш¬ ШЄШ­Ш±ЩЉШ±/ШЄШґШєЩЉЩ„ Ш§Щ„ЩЃЩЉШЇЩЉЩ€ Щ€ Ш§Щ„ШµЩ€ШЄ"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "ШЁШ±Ш§Щ…Ш¬ Ш±ШіЩ€Щ…ЩЉШ§ШЄ Щ…Ш«Щ„ The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Щ…Ш­Ш·Ш© ШЈЩ„Ш№Ш§ШЁ"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Щ…Ш¬Щ…Щ€Ш№Ш© Щ…Щ† Ш§Щ„ШЈШЇЩ€Ш§ШЄ Щ„Щ‚Ш±Ш§ШЎШ© Щ€ Ш§Ш±ШіШ§Щ„ Ш§Щ„ШЁШ±ЩЉШЇ Щ€ Ш§Щ„ШЈШ®ШЁШ§Ш± (pine, mutt, tin..) Щ€ "
-"Щ„ШЄШµЩЃШ­ Ш§Щ„ШҐЩ†ШЄШ±Щ†ШЄ"
+#~ msgid "Graphics programs"
+#~ msgstr "ШЁШ±Ш§Щ…Ш¬ Ш±ШіЩ€Щ…ЩЉШ§ШЄ Щ…Ш«Щ„ The Gimp"
 
 #~ msgid "Printer sharing"
 #~ msgstr "Щ…ШґШ§Ш±ЩѓШ© Ш§Щ„Ш·Ш§ШЁШ№Ш§ШЄ"
@@ -18974,9 +19511,6 @@ msgstr ""
 #~ msgid "GDI Laser Printer using the Zenographics ZJ-Stream Format"
 #~ msgstr "GDI Laser Printer using the Zenographics ZJ-Stream Format"
 
-#~ msgid "%s"
-#~ msgstr "%s"
-
 #~ msgid "Office"
 #~ msgstr "ШЈШЇЩ€Ш§ШЄ Ш§Щ„Щ…ЩѓШЄШЁ"
 
@@ -19136,12 +19670,10 @@ msgstr ""
 #~ "button\n"
 #~ "to change it if necessary.\n"
 #~ "\n"
-#~ " * \"Keyboard\": check the current keyboard map configuration and click "
-#~ "on\n"
+#~ " * \"%s\": check the current keyboard map configuration and click on\n"
 #~ "the button to change that if necessary.\n"
 #~ "\n"
-#~ " * \"Country\": check the current country selection. If you are not in "
-#~ "this\n"
+#~ " * \"%s\": check the current country selection. If you are not in this\n"
 #~ "country, click on the button and choose another one.\n"
 #~ "\n"
 #~ " * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
@@ -19245,8 +19777,7 @@ msgstr ""
 #~ "your machine. If you're not sure, you can check the list of hardware\n"
 #~ "detected in your machine by selecting \"See hardware info \" and "
 #~ "clicking\n"
-#~ "the \"Next ->\". Examine the list of hardware and then click on the "
-#~ "\"Next\n"
+#~ "the \"%s\". Examine the list of hardware and then click on the \"Next\n"
 #~ "->\" button to return to the SCSI interface question.\n"
 #~ "\n"
 #~ "If you had to manually specify your PCI SCSI adapter, DrakX will ask if "
@@ -19302,8 +19833,7 @@ msgstr ""
 #~ "your\n"
 #~ "first experience with GNU/Linux.\n"
 #~ "\n"
-#~ " * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice "
-#~ "for\n"
+#~ " * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
 #~ "printing to your local printer or to one halfway around the planet. It "
 #~ "is\n"
 #~ "simple to configure and can act as a server or a client for the ancient\n"
@@ -19312,7 +19842,7 @@ msgstr ""
 #~ "setup\n"
 #~ "is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, "
 #~ "make\n"
-#~ "sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
+#~ "sure to turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
 #~ "front-ends for printing or choosing printer options and for managing the\n"
 #~ "printer.\n"
 #~ "\n"
@@ -19333,7 +19863,7 @@ msgstr ""
 #~ "Щ€ ЩЉШ№ЩЉШЁЩ‡ Ш§Щ„ШЁШ·Ш¦ Ш№Щ†ШЇ Ш§?ШіШЄШ®ШЇШ§Щ… Щ…Ш№ Ш§Щ„ШґШЁЩѓШ§ШЄ). Щ…Щ† Ш§?ЩЃШ¶Щ„ ШЈЩ† ШЄШіШЄШ®ШЇЩ… \"pdq\" Ш§Ш°Ш§.\n"
 #~ "ЩѓШ§Щ†ШЄ Щ‡Ш°Щ‡ ШЄШ¬Ш±ШЁШЄЩѓ Ш§?Щ€Щ„Щ‰ Щ…Ш№ Щ†ШёШ§Щ… Щ„ЩЉЩ†ЩѓШі.\n"
 #~ "\n"
-#~ " * \"CUPS\" - ``Common UNIX Printing System'', Щ‡Щ€ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
+#~ " * \"%s\" - ``Common UNIX Printing System'', Щ‡Щ€ Ш§Щ„Ш®ЩЉШ§Ш± Ш§?Щ…Ш«Щ„\n"
 #~ "Щ„Щ„Ш·ШЁШ§Ш№Ш© Ш№Щ„Щ‰ Ш·Ш§ШЁШ№ШЄЩѓ Ш§Щ„Щ…Ш­Щ„ЩЉШ© ШЈЩ€ Ш­ШЄЩ‰ Ш№Щ„Щ‰ Ш·Ш§ШЁШ№Ш© ЩЃЩЉ Ш§Щ„Щ†ШµЩЃ Ш§?Ш®Ш± Щ…Щ† Ш§Щ„ЩѓЩ€ЩѓШЁ. Ш§Щ†Щ‡\n"
 #~ "ШіЩ‡Щ„ Ш§?Ш№ШЇШ§ШЇ Щ€ ЩЉЩ…ЩѓЩ† ШЈЩ† ЩЉШЄШµШ±ЩЃ ЩѓШ®Ш§ШЇЩ… ШЈЩ€ ЩѓШ№Щ…ЩЉЩ„ ?Щ†ШёЩ…Ш© Ш·ШЁШ§Ш№Ш© \"lpd\"\n"
 #~ "Ш§Щ„Щ‚ШЇЩЉЩ…Ш©, Щ„Ш°Ш§ ЩЃШҐЩ†Щ‡ Щ…ШЄЩ€Ш§ЩЃЩ‚ Щ…Ш№ ШЈЩ†ШёЩ…Ш© Ш§Щ„ШЄШґШєЩЉЩ„ Ш§Щ„Щ‚ШЇЩЉЩ…Ш©\n"
@@ -19352,7 +19882,7 @@ msgstr ""
 #~ "documentation, the installer and the system in general. Select first the\n"
 #~ "region you are located in, and then the language you speak.\n"
 #~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
 #~ "languages to be installed on your workstation, thereby installing the\n"
 #~ "language-specific files for system documentation and applications. For\n"
 #~ "example, if you will host users from Spain on your machine, select "
@@ -19362,7 +19892,7 @@ msgstr ""
 #~ "\n"
 #~ "Note that you're not limited to choosing a single additional language. "
 #~ "Once\n"
-#~ "you have selected additional locales, click the \"Next ->\" button to\n"
+#~ "you have selected additional locales, click the \"%s\" button to\n"
 #~ "continue.\n"
 #~ "\n"
 #~ "To switch between the various languages installed on the system, you can\n"
@@ -19391,7 +19921,7 @@ msgstr ""
 #~ "ШіЩЉШєЩЉШ± ЩЃЩ‚Ш· Ш§Ш№ШЇШ§ШЇШ§ШЄ Ш§Щ„Щ„ШєШ© Щ„Щ‡Ш°Ш§ Ш§Щ„Щ…ШіШЄШ®ШЇЩ… ЩЃЩ‚Ш·."
 
 #~ msgid ""
-#~ "\"Country\": check the current country selection. If you are not in this\n"
+#~ "\"%s\": check the current country selection. If you are not in this\n"
 #~ "country, click on the button and choose another one."
 #~ msgstr ""
 #~ "\"Ш§Щ„ШЁЩ„ШЇ\": ШЄШЈЩѓШЇ Щ…Щ† Ш§Ш®ШЄЩЉШ§Ш± Ш§Щ„ШЁЩ„ШЇ Ш§Щ„Ш­Ш§Щ„ЩЉ. Ш§Ш°Ш§ Щ„Щ… ШЄЩѓЩ† ЩЃЩЉ Щ‡Ш°Ш§\n"
@@ -19809,9 +20339,6 @@ msgstr ""
 #~ msgid "Install system updates"
 #~ msgstr "ШЄШ«ШЁЩЉШЄ ШЄШ­ШЇЩЉШ«Ш§ШЄ Ш§Щ„Щ†ШёШ§Щ…"
 
-#~ msgid "Upgrade"
-#~ msgstr "ШЄШ±Щ‚ЩЉШ©"
-
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "Щ‡Щ„ ШЄШ±ЩЉШЇ ШЄШ¬Ш±ШЁШ© ШҐШ№ШЇШ§ШЇ Ш·Ш§ШЁШ№Ш© ШЈШ®Ш±Щ‰Шџ"
 
diff --git a/perl-install/share/po/az.po b/perl-install/share/po/az.po
index 20ae17419..78fa3b460 100644
--- a/perl-install/share/po/az.po
+++ b/perl-install/share/po/az.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2001-09-01 22:26GMT +0200\n"
 "Last-Translator: Vasif Д°smayД±loДџlu MD <azerb_linux@hotmail.com>\n"
 "Language-Team: Azerbaijani Turkish <linuxaz@azerimal.net>\n"
@@ -15,2989 +15,608 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 0.8\n"
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "LЙ™Дџv et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Bağlama nöqtələri üçün bölmələr daranır"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "if set to yes, check additions/removals of suid root files."
 msgstr ""
-"Bu paket yenilЙ™nmЙ™lidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "XГјsusi"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "CUPS baЕџlayД±r"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "Daha Г‡ox"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "Bütün mövcud klaviaturaların siyahısı"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Reyunion"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country"
-msgstr "Г–lkЙ™:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "İşlətdiyiniz dili seçin"
-
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Unicode by default"
+msgid "\t\tErase=%s"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the default user:"
-msgstr "Əsas istifadəçini seçin:"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
-
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"KompГјterinizi avtomatik olaraq bir istifadЙ™Г§i ilЙ™ baЕџlada bilЙ™rЙ™m.\n"
-"Д°stЙ™mirsiniz isЙ™ rЙ™dd edin."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Avtomatik GiriЕџ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Timsal"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "QabД±q"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "Parol (tЙ™krar)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "Parol"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "Д°stifadЙ™Г§i adД±"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Real name"
-msgstr "HЙ™qiqi adД±"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Accept user"
-msgstr "Д°stifadЙ™Г§ini qЙ™bul et"
-
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Done"
-msgstr "QurtardД±"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
-msgstr ""
-"Bir istifadЙ™Г§i girin\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This user name has already been added"
-msgstr "Bu istifadЙ™Г§i adД± artД±q vardД±r"
+msgid "network printer port"
+msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Bu istifadЙ™Г§i adД± artД±q vardД±r"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr ""
-"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
-"ola bilЙ™r"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "XahiЕџ edirik bir istifadЙ™Г§i adД± alД±n"
+msgid "Please insert floppy disk:"
+msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Zəif parol seçdiniz!"
+msgid "PCMCIA"
+msgstr "PCMCIA"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "Parollar uyДџun gЙ™lmir"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(%s artД±q Й™lavЙ™ edilmiЕџdir)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to rpm tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to X programs"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
-"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
-"ya da mövcud olanları dəyişdirə bilərsiniz."
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "DigЙ™r sistemlЙ™r (windows...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "DigЙ™r sistemlЙ™r (MacOS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "DigЙ™r sistemlЙ™r (SunOS...)"
+"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
+"Davam etmЙ™k istЙ™yirsiniz?"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "Linuks"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Which username"
+msgstr "Д°stifadЙ™Г§i adД±"
 
 #: ../../any.pm:1
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "Ne cГјr bir giriЕџ istЙ™yirsiniz?"
 
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "Bu etiket istifadЙ™ edilmЙ™z"
-
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Bir swap sahЙ™sinЙ™ ehtiyacД±nД±z var"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "BoЕџ etiket qЙ™bul edilЙ™ bilmЙ™z"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "ЖЏsas"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoVД°deo"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd böyüklüyü"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Sonuna Й™lavЙ™ et"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Etiket"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "E'tibarsД±z"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "CЙ™dvЙ™l"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Kök"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Oxu-yaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "Ekran modu"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "ЖЏks"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "ЖЏsas OS"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "OF Açılışı Fəallaşdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Çəkirdək Açılışı Vaxt Dolması"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Firmware Gecikməsini Aç"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "Açılış avadanlığı"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "Д°nit Д°smarД±cД±"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "Sistem yükləyicisi ana seçənəkləri"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr ""
-"``Əmr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "YaddaЕџ miqdarД±nД± Mb cinsindЙ™n verin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "BirdЙ™n artД±q profilЙ™ icazЙ™ ver"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Гњmumi yaddaЕџ miqdarД± (%d MB tapД±ldД±)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "/tmp-i hər açılışda təmizlə"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "Açılış disketi yarat"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "mЙ™hdudlaЕџdД±r"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "Əmr sətiri seçənəklərini məhdudlaşdır"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "Restore partition table"
+msgstr "Bölmə cədvəlini qurtar"
 
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
 #, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "CDdən Açılışı Fəallaşdırım?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "Açılışda gecikmə müddəti"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "bЙ™sit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "BЙ™sit"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Açılış yükləyici quruluşu"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "Açılış qisminin ilk sektoru"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Diskin ilk sektoru (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Sistem yГјklЙ™yicisini haraya qurmaq istЙ™yirsiniz?"
+msgid "On CUPS server \"%s\""
+msgstr "CUPS verici IP"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grup Qurulumu"
+msgid "Post-install configuration"
+msgstr "Qurulum sonrasД± qurДџular"
 
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO Qurulumu"
+msgid "Use ``%s'' instead"
+msgstr "YerinЙ™ ``%s'' iЕџlЙ™t"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Skip"
-msgstr "NЙ™zЙ™rЙ™ Alma"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "DisketЙ™ qeyd et"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Açılış qisminin ilk sektoru"
+msgid "Type"
+msgstr "Növ"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
 "\n"
-"On which drive are you booting?"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Açılış disketi yaradılır"
+msgid "Sri Lanka"
+msgstr "Ећri Lanka"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Д°kinci disket sГјrГјcГј"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Д°lk disket sГјrГјcГј"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "BaДџД±ЕџlayД±n, disket sГјrГјcГј yoxdur"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lГјzГјm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanД±z,\n"
-"ya da baЕџqa bir Й™mЙ™liyyat sistemi liloyu silЙ™rsa ya da lilo "
-"avadanlД±ДџД±nД±zlaiЕџlЙ™mЙ™zsЙ™\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rЙ™smini\n"
-"istifadЙ™ edЙ™rЙ™k dЙ™ bu disket yaradД±la bilЙ™r.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
-"yerlЙ™Еџdirin\n"
-"vЙ™ \"OLDU\" basД±n.\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
-"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
-msgstr ""
-"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
-"lГјzГјm\n"
-"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
-"qurmayacaqsanД±z,\n"
-"ya da baЕџqa bir Й™mЙ™liyyat sistemi liloyu silЙ™rsa ya da lilo "
-"avadanlД±ДџД±nД±zlaiЕџlЙ™mЙ™zsЙ™\n"
-"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
-"rЙ™smini\n"
-"istifadЙ™ edЙ™rЙ™k dЙ™ bu disket yaradД±la bilЙ™r.\n"
-"Açılış disketi yaratmaq istəyirsiniz?\n"
-"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
-"yerlЙ™Еџdirin\n"
-"vЙ™ \"OLDU\" basД±n."
-
-#: ../../bootloader.pm:1
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Sistem yГјklЙ™yicisini haraya qurmaq istЙ™yirsiniz?"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "/boot içində lazımi yer yoxdur"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr ""
-"acilisdan evvel emrleri duzeltmЙ™k ucun 'e', emr setiri ucun ise 'c' basin"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "%c ve %c duymeleri ile isД±qlandД±rД±lmД±s girisleri sece bilersiniz"
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Emeliyyat sistemi secici GRUB'a xos gЙ™lmissiniz!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "MЙ™tn menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "Qrafiki menyulu LILO"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "SILO"
-msgstr "SILO"
-
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
-msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"%s emeliyyat sistemi secki proqramina xos gЙ™lmissiniz!\n"
-"\n"
-"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
-"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"The following printer\n"
 "\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "kdesu Й™ksikdir"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "%d seconds"
-msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "GB"
-msgstr ""
+msgid "Central African Republic"
+msgstr "MЙ™rkЙ™zi Afrika RespublikasД±"
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Gateway device"
+msgstr "Keçit avadanlığı"
 
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "KB"
+msgid "Net Method:"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "BirlЙ™ЕџmiЕџ Ећtatlar"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "serial"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "Д°talyanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "Hollandiya"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "İsveçcə"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Norveçcə"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "Yunanca"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Germany"
-msgstr "Almanca"
+msgid "Ethernetcard"
+msgstr "Eternet KartД±"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Г‡ex RespublikasД±"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "Belçika dili"
+msgid "Parameters"
+msgstr "ParametrlЙ™r"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "France"
-msgstr "FransД±zca"
+msgid "Auto-detect"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Costa Rica"
-msgstr "Kosta Rika"
+msgid "Interface:"
+msgstr "Ara Гјz"
 
-#: ../../fsedit.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Yazmaq üçün açılan %s'də xəta: %s"
+msgid "Select installation class"
+msgstr "Quruluş sinifini seçin"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Nothing to do"
-msgstr ""
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+msgid "on CDROM"
 msgstr ""
-"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
-"ehtiyac vardД±r.\n"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
 
-#: ../../fsedit.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
 msgstr ""
-"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
-"etdiniz.\n"
-"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
-"Й™lavЙ™ etmЙ™yi unutmayД±n"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Г‡ap edici adД± tЙ™kcЙ™ hЙ™rf, rЙ™qЙ™m vЙ™ alt xЙ™tt daxil edЙ™ bilЙ™r"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Bağlama nöqtələri / ilə başlamalıdır"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
+"Sisteminiz Д°nternetЙ™ baДџlД± deyil.\n"
+"BaДџlantД±nД± yenidЙ™n quraЕџdД±rД±n"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
 msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
 "\n"
-"Do you agree to loose all the partitions?\n"
+"Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
-"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
-"Xarab olmuЕџ bolmЙ™lЙ™ri dГјzЙ™ltmЙ™yЙ™ Г§alД±Еџacam.\n"
-"Amma bГјtГјn mЙ™'lumatlar itЙ™cЙ™kdir.\n"
-"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
-"passivlЙ™ЕџdirmЙ™kdir.\n"
-"(xЙ™ta %s)\n"
-"\n"
-"Bütün bölmələri itirmək istəyirsiniz?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error"
-msgstr "XЙ™ta"
+msgid "Belarus"
+msgstr "Belarusiya"
 
-#: ../../fsedit.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "server"
-msgstr "verici"
+msgid "Error writing to file %s"
+msgstr "%s faylД±na yazarkЙ™n xЙ™ta oldu"
 
-#: ../../fsedit.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "with /usr"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
+"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
+"tutmaq üçün istifadə edilir.\n"
+"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "bЙ™sit"
-
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "error unmounting %s: %s"
-msgstr "%s ayrД±lД±rkЙ™n xЙ™ta oldu: %s"
+msgid "Use tape to backup"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../fs.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
+msgid "The following packages are going to be installed"
+msgstr "AЕџaДџД±dakД± paketlЙ™r qurulacaqdД±r"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "CUPS configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../fs.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Şəkilləndirilən bölmə: %s"
+msgid "Hong Kong"
+msgstr "Honq Konq"
 
-#: ../../fs.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "%s faylД± yaradД±lД±r vЙ™ ЕџЙ™killЙ™ndirilir"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Yeni bölmələr üçün boş sahə yoxdur"
 
-#: ../../fs.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
+msgid "Moving"
+msgstr "DaЕџД±nД±r"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s şəkilləndirilməsində %s bölmə xətası"
-
-#: ../../help.pm:1
-#, fuzzy, c-format
 msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
-"\"Oldu\" dГјymЙ™sinЙ™ basД±n. DiqqЙ™tli olun,\"Oldu\" dГјymЙ™sinЙ™ basdД±qdan sonra\n"
-"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
-"ЕџЙ™kildЙ™ silinЙ™cЙ™k.\n"
 "\n"
+"Drakbackup activities via %s:\n"
 "\n"
-"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
-"Й™mЙ™liyyatД± lЙ™Дџv edЙ™ bilЙ™rsiniz."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
 msgstr ""
-"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
-"DiqqЙ™tli olun, sГјrГјcГјdЙ™ki bГјtГјn mЙ™'lumatlar silinЙ™cЙ™k\n"
-"vЙ™ geri gЙ™lmЙ™yЙ™cЙ™k."
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "("
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
-"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
-"GNU/Linuks, MacOS, vЙ™ ya MacOSX sistemlЙ™rini kompГјterinizdЙ™ varsa, "
-"açacaqdır.\n"
-"Normalda, bu Й™mЙ™liyyat sistemlЙ™ri dГјzgГјn tapД±lД±b qurula bilirlЙ™r\n"
-"ЖЏgЙ™r belЙ™ olmazsa, bu ekrandan Й™llЙ™ lazД±mi qurДџularД± girЙ™ bilЙ™rsiniz.\n"
-"DГјzgГјn parametrlЙ™ri girib girmЙ™diyinizi yaxЕџД±ca bir yoxlayД±n.\n"
-"\n"
-"\n"
-"Yaboot ana seçənəkləri:\n"
-"\n"
-"\n"
-"  - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
-"\n"
-"\n"
-"  - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
-"ГњmumiyyЙ™tlЙ™ bu mЙ™'lumatД± daha Й™vvЙ™l \"bootstrap\" quraЕџdД±rД±lmasД± "
-"sД±rasД±ndabildirmiЕџ olacaqsД±nД±z.\n"
-"\n"
-"\n"
-"  - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
-"gecikmЙ™ vardД±r\n"
-"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
-"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
-"\n"
-"\n"
-"  - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
-"uyДџun gЙ™lir.  Linuksu\n"
-"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
-"qurulu olacaqdД±r.\n"
-"\n"
-"\n"
-"  - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
-"xarakteri ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
-"timsal edЙ™n 'N' xarakteri\n"
-"ilk açılışda çıxacaqdır.\n"
-"\n"
-"\n"
-"  - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
-"göstərir."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
-msgstr ""
-"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
-"kernellЙ™r,\n"
-" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
-"\n"
-"\n"
-"Başqa OSlər  üçün girişin mənası ad və kök çığırından ibarətdir.\n"
-"\n"
-"\n"
-"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
-"\n"
-"\n"
-"  - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
-"addД±r.\n"
-"\n"
-"\n"
-"  - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır.  Çox vaxt bu "
-"vmlinux vЙ™ ya\n"
-"bunun variasiyalarД±dД±r.\n"
-"\n"
-"\n"
-"  - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
-"\n"
-"\n"
-"  \n"
-"  - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
-"baЕџlanДџД±c\n"
-"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
-"emulyasiya\n"
-"imkanlarД± tanД±na bilir.  MЙ™sЙ™lЙ™n bunlar \n"
-"bir neçə nümunədir:\n"
-"\n"
-"\n"
-"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
-"hda=autotune\n"
-"\n"
-"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
-"\n"
-"\n"
-" \n"
-"  - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
-"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
-"imkanД± verir.\n"
-"\n"
-"\n"
-"  - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır.  Əgər daha "
-"geniЕџ ramdisk bildirЙ™\n"
-"bilərsiniz isə bu seçənəyi işlədin.\n"
-"\n"
-"\n"
-"  - Oxuma-yazma: Normalda sistemin 'dirilmЙ™sindЙ™n' Й™vvЙ™l bЙ™'zi sД±naqlarД±n "
-"aparıla bilməsi üçün\n"
-"'root' fayl sistemi bu moda soxulur.  Bu seçənəyi nəzərə almayabilərsiniz.\n"
-"\n"
-"\n"
-"  - NoVideo: BЙ™lkЙ™ Apple video avadanlД±ДџД± problem Г§Д±xarda bilЙ™r.Onda bu "
-"seçənəklə\n"
-"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
-"\n"
-"\n"
-"  - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
-"bilЙ™rsiniz.\n"
-"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır.  Bu giriş ayrıca "
-"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
-"'*' iЕџarЙ™tilЙ™ iЕџД±qlandД±rД±lacaqdД±r."
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"Welcome to The Network Configuration Wizard.\n"
 "\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
 msgstr ""
-"DrakX PCI SCSI adapterleri axtarmaДџa cЙ™hd edЙ™cЙ™k. ЖЏgЙ™ DrakX SCSI\n"
-"taparsa vЙ™ hansД± sГјrГјcГј iЕџlЙ™dilЙ™cЙ™yini bilЙ™rsЙ™, her Еџey Г¶z Г¶zГјnЙ™\n"
-"qurulacaq.\n"
-"\n"
-"\n"
-"ЖЏgЙ™r sisteminizdЙ™ SCSI adapteri yoxsa, DrakXin tanД±mayacaДџД± bir\n"
-"ISA SCSI vЙ™ ya PCI SCSI adapteri var isЙ™, sizЙ™ sisteminizdЙ™ SCSI\n"
-"adapteri olub olmadД±ДџД± soruЕџulacaq.\n"
-"ЖЏgЙ™r SCSI adapteriniz yox isЙ™, \"Yox\" tД±qlayД±n. ЖЏgЙ™r \"Var\"Д± "
-"tД±qlayarsanД±z.\n"
-"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
-"\n"
-"\n"
-"ЖЏgЙ™r Й™llЙ™ qurmaДџД± sЙ™Г§Й™rsЙ™niz, o zaman DrakX sizЙ™ adapterin xГјsusiyyЙ™tlЙ™rini\n"
-"soruЕџacaq. Д°mkan verin ki, DrakX sЙ™rbЙ™stcЙ™ Г¶zГј xГјsusiyyЙ™tlЙ™ri tapsД±n.\n"
-"Г‡oxunda bu iЕџЙ™ yarayД±r.\n"
-"\n"
-"\n"
-"Əgər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
-"göstərməlisiniz. Bunun üçün İstifadəçinin Əl Kitabçasına\n"
-"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
-"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
-"veb sЙ™hifЙ™sindЙ™n (ЖЏgЙ™r internetЙ™ Г§Д±xД±ЕџД±nД±z var isЙ™)\n"
-"ya da Microsoft Windowsdan (ЖЏgЙ™r sisteminizdЙ™ qurulu isЙ™)\n"
-"mЙ™'lumat alД±n."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
 "\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
+"Д°nternet/ЕћЙ™bЙ™kЙ™ qurДџularД±nД±zД± edЙ™cЙ™yik.\n"
+"Avtomatik tЙ™sbit istЙ™mirsiniz isЙ™ iЕџarЙ™ti qaldД±rД±n.\n"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid ")"
 msgstr ""
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
-"Linuks\n"
-"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
-"ЖЏsasЙ™n bu digЙ™r Й™mЙ™liyyat sistemlЙ™ri doДџru bir ЕџЙ™kilde tЙ™sbit edilib "
-"açılışa\n"
-"qurula bilЙ™rlЙ™r. ЖЏgЙ™r bir problem olarsa, buradan Й™llЙ™ Й™lavЙ™ edilЙ™ "
-"bilЙ™rlЙ™r.\n"
-"Parametrlər mövzusunda diqqətli olun."
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Lebanon"
+msgstr "Livan"
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../help.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
-"Linuksda ttyS0'dД±r."
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Stop"
+msgstr "Sektor"
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "%s tapД±ldД±"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
-"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
-"yenidənölçüləndirmək üzərə seçin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
-"adД±\"\"HЙ™cm\".\n"
-"\n"
-"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
-"nömrəsi\" (məsələn, \"hda\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yЙ™ni \"birinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yЙ™ni \"ikinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sГјrГјcГјlЙ™rindЙ™ \"a\" nД±n mЙ™nasД± \"birinci sГјrГјcГј\",\n"
-"\"b\"nin mЙ™nasД± \"ikinci sГјrГјcГј\"dГјr vs..."
+msgid "No CD device defined!"
+msgstr "Fayl seç"
 
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. Əgər "
-"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
-"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
-"onları seçin və istifadə edin.\n"
-"Yoxsa onlarД± bildirmЙ™lisiniz.\n"
-"\n"
-"\n"
-"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
-"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
-"\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n"
-"\n"
-"\n"
-"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
-"\n"
-"  *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
-"\n"
-"\n"
-"  *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
-"yaradar.\n"
-"\n"
-"\n"
-"  *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər.  Xahiş "
-"edirik\n"
-" diqqətli olun, çünkü bu da iflas edə bilər.\n"
-"\n"
-"\n"
-"  *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
-"\n"
-"\n"
-"  *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
-"cЙ™dvЙ™linЙ™ gЙ™lЙ™r.\n"
-"\n"
-"\n"
-"  *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
-"seçin.\n"
-"\n"
-"\n"
-" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
-"bölmə cədvəlini bərpa edin.\n"
-"\n"
-"\n"
-"  *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
-"edin.\n"
-"  Bu seçki şiddətlə tövsiyə edilir.\n"
-"\n"
-"\n"
-"  *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
-"edin.\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
-"klaviaturadan idarЙ™ edЙ™ bilЙ™rsiniz.\n"
-"\n"
-"\n"
-"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
-"\n"
-"      *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
-"\n"
-"      *Ctrl-d bölməni ləğv etmək üçün\n"
-"\n"
-"      *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
-"\n"
-"\n"
-"\n"
-"ЖЏgЙ™r PPC kompГјterdЙ™ qurulum aparД±rsД±nД±zsa, Й™n az 1 MBlД±q balaca bir HFC "
-"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
-"ЖЏgЙ™r daha Г§ox yeriniz varsa ; mЙ™sЙ™lЙ™n 50 MB, onda bГјtГјn kernel vЙ™ ramdisk "
-"əksini təcili açılış halları üçün saxlaya bilərsiniz."
+msgid "Bulgarian (phonetic)"
+msgstr "ErmenicЙ™ (fonetik)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+msgid "The DHCP start ip"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
-msgstr ""
+msgid "256 kB"
+msgstr "256 kB"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
-"(ЕџЙ™killЙ™ndirmЙ™k yЙ™ni fayl sistemi yaratmaq - format).\n"
-"\n"
-"\n"
-"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
-"ЕџЙ™killЙ™ndirmЙ™k istЙ™ya\n"
-"bilЙ™rsiniz.\n"
-"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
-"\n"
-"\n"
-"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
-"mЙ™cburi deyil.\n"
-"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
-"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
-"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
-"buraxa bilЙ™rsiniz.\n"
-"\n"
-"\n"
-"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
-"geri gЙ™lmЙ™z.\n"
-"\n"
-"\n"
-"ЕћЙ™killЙ™ndirmЙ™yЙ™ hazД±r isЙ™niz \"Oldu\" dГјymЙ™sini tД±qlayД±n.\n"
-"\n"
-"\n"
-"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
-"istЙ™yirsiniz isЙ™ \"LЙ™Дџv et\" dГјymЙ™sinЙ™ basД±n."
+#: ../../any.pm:1
+#, c-format
+msgid "Bootloader main options"
+msgstr "Sistem yükləyicisi ana seçənəkləri"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
-"\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
-"qЙ™rar verЙ™cЙ™ksiniz. ЖЏgЙ™r diskiniz boЕџ isЙ™ vЙ™ ya bir baЕџqa sistem\n"
-"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
-"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
-"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
-"\n"
-"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
-"bu iЕџ Г§ox gЙ™rgin vЙ™ yorucudur. ЖЏgЙ™r Г¶zГјnГјzЙ™ inanmД±rsД±nД±z isЙ™ bu\n"
-"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
-"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
-"\n"
-"\n"
-"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
-"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
-"\n"
-"\n"
-"Əgər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
-"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
-"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
-"\n"
-"\n"
-"Əgər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
-"Sisteminizin quruluЕџundan asД±lД± olaraq mГјxtЙ™lif imkanlarД±nД±z var:\n"
-"\n"
-"* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n"
-" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
-" SildiklЙ™riniz Й™sla geri gЙ™lmЙ™z.\n"
-"\n"
-"\n"
-"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
-" Microsoft Windows qurulu isЙ™ ve bГјtГјn diski Й™hatЙ™ edir isЙ™\n"
-" Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n"
-" ya bГјtГјn diski silmЙ™lisiniz (\"BГјtГјn diski sil\" bax ya da\n"
-" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
-"bir mЙ™'lumat itkisi olmadan da edilЙ™ bilЙ™r.Bunun baЕџqa adД±\n"
-" eyni kompГјterdЙ™ hЙ™m Linuks Mandrake hЙ™m dЙ™ Windows qurulu olmasД±dД±r.\n"
-"\n"
-"\n"
-"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
-"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
-" YЙ™'ni Windows altД±nda daha az disk sahЙ™sinЙ™ malik olacaqsД±nД±z.\n"
-"\n"
-"\n"
-"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
-"olun.\n"
-" Bu mod gГјГ§lГјdГјr amma bir o qЙ™dЙ™r dЙ™ tЙ™hlГјkЙ™lidir. DiskinizdЙ™ki bГјtГјn "
-"bilgiyi asandlД±qla itirЙ™ bilЙ™rsiniz.\n"
-" Təcrübəsiz isəniz bunu seçməyin."
+msgid "Tape"
+msgstr "Növ"
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "BaДџlantД±nД±z baЕџladД±lД±r..."
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Malaysia"
+msgstr "Malayziya"
 
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
-msgstr ""
+msgid "Swiss (French layout)"
+msgstr "İsveçcə (Fransız sırası)"
 
-#: ../../help.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid iflas etdi (raidtools Й™ksik ola bilЙ™r mi?)"
 
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "Webcam"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "size of the (second level) cpu cache"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
-"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
-"açıqlayan\n"
-"kiçik bir baloncuq ortaya çıxacaqdır.\n"
-"\n"
-"ЖЏgЙ™r kompГјterinizi bir verici olaraq istifadЙ™ edЙ™cЙ™ksЙ™niz bu addД±mda tam bir "
-"diqqЙ™t ayД±rmalД±sД±nД±z:\n"
-"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
+msgid "Soundcard"
+msgstr "SЙ™s kartД±"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
-msgstr ""
+msgid "Level %s\n"
+msgstr "SЙ™viyyЙ™ %s\n"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Luxembourg"
+msgstr "LГјksemburq"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
 "\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
+"                      DrakBackup Daemon Report\n"
 "\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
 "\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
-
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
-msgstr ""
-"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
-"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
-"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
-"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
-"Əgər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
-"bölməsi də yaratmalısınız (birdən çox Linuks\n"
-"bölməniz var isə).\n"
-"\n"
-"\n"
-"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
-"\n"
-"\n"
-"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
-"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
-"\n"
-"\n"
-"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
-"\"sd\"dir.\n"
-"\n"
-"\n"
-"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
-"sürücülər üçün:\n"
-"\n"
-"*\"a\" yЙ™ni \"birinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
-"\n"
-"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
-"\n"
-"*\"c\" yЙ™ni \"ikinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
-"\n"
-"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
-"\n"
-"\n"
-"SCSI sГјrГјcГјlЙ™rindЙ™ \"a\" nД±n mЙ™nasД± \"birinci sГјrГјcГј\",\n"
-"\"b\"nin mЙ™nasД± \"ikinci sГјrГјcГј\"dГјr vs..."
+msgid "Iran"
+msgstr "Д°raq"
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "Bus"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+msgid "Iraq"
+msgstr "Д°raq"
 
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "%s quДџusunda dЙ™yЙ™sЙ™n bir LAN Гјnvan Г§axД±ЕџmasД± tapД±ldД±!\n"
 
-#: ../../install2.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+msgid "Configuring..."
+msgstr "QuraЕџdД±rД±lД±r..."
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "QuraЕџdД±rma artД±q qurtarД±bdД±r vЙ™ fЙ™aliyyЙ™tdЙ™dir."
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
-"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "%s faylД± oxunurkan xЙ™ta oldu"
+msgid "Password (again)"
+msgstr "Parol (tЙ™krar)"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Search installed fonts"
 msgstr ""
-"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
-"defcfg=floppy''ilЙ™ baЕџladД±n."
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Bu floppi FAT ЕџЙ™klindЙ™ deyildir"
+msgid "Venezuela"
+msgstr "Venezuela"
 
-#: ../../install_any.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "%s sГјrГјcГјsГјnЙ™ FAT ЕџЙ™killЙ™ndirilmiЕџ bir disket taxД±n"
+msgid "IP address"
+msgstr "IP ГјnvanД±"
 
-#: ../../install_any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "NД°S domeyni olmadan translasiya iЕџlЙ™dilЙ™ bilmЙ™z"
+msgid "Choose the sizes"
+msgstr "Böyüklüklərini seçin"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
+"List of data corrupted:\n"
 "\n"
-"Do you really want to remove these packages?\n"
 msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "No"
-msgstr "Xeyr"
-
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Yes"
-msgstr "BЙ™li"
-
-#: ../../install_any.pm:1
-#, fuzzy, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
 msgstr ""
-"bu vericiləri seçdiniz: %s\n"
-"\n"
-"\n"
-"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
-"problemlЙ™ri yoxdur, amma bЙ™'zi xЙ™talar tapД±la bilЙ™r. BelЙ™ olsa, mГјmГјkГјn olan "
-"Й™n yaxД±n zamanda gГјncЙ™llЙ™mЙ™lisiniz.\n"
-"\n"
-"\n"
-"Bu vericilЙ™ri qurmaq istЙ™yirsiniz?\n"
 
-#: ../../install_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "System configuration"
-msgstr "QuraЕџdД±rma"
+msgid "Choose another partition"
+msgstr "Yeni bölmə yarat"
 
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "System installation"
-msgstr "SILO Qurulumu"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "ЕћЙ™bЙ™kЙ™ fЙ™allaЕџdД±rД±lД±r"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "Bölmə cədvəli növü: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "Artıq bölmə əlavə edilə bilməz"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
-"Д°Еџinizi bitirdiyinizdЙ™ `w' ilЙ™ qeyd etmЙ™yi unutmayД±n"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "Fdisk istifadЙ™ et"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "Hazırkı disk bölmələndirməsi"
+msgid "Current user"
+msgstr "Д°stifadЙ™Г§ini qЙ™bul et"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr ""
-"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
-"mЙ™'lumatlar silinЙ™cЙ™kdir"
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
+msgid "Left \"Windows\" key"
 msgstr ""
-"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
-"edЙ™cЙ™ksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "BГјtГјn diski sil"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "\"Windows\"u sil"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
+msgid "dhcpd Server Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
 msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
+msgid "Guyana"
+msgstr "Quyana"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Fat fayl sistemi uclarД± hesaplanД±r"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr ""
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Resizing"
-msgstr "Böyüklüyü dəyişdirilir"
+msgid "Remove a module"
+msgstr "Modulu Г§Д±xart"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "partition %s"
-msgstr "bölmə %s"
+msgid "Password"
+msgstr "Parol"
 
-#: ../../install_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "HansД± sektora daЕџД±maq istЙ™yirsiniz?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
 msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"DД°QQЖЏT!\n"
+"Arguments: (max, inactive=-1)\n"
 "\n"
-"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
-"tehlГјkЙ™li ola bilЙ™r. AЕџina deyil isЙ™niz qurulumdan Г§Д±xД±n vЙ™ \"Windows\" \n"
-"altД±nda \"Scandisk\" (lazД±m gЙ™lЙ™rsЙ™ \"defrag\" da) proqramД±nД± Г§alД±ЕџdД±rД±n. "
-"ArdД±ndan quruluma \n"
-"davam edin. VerilЙ™rinizin yedЙ™yini almaДџД± da unutmayД±n!"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
 msgstr ""
-"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
-"(defraq)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
+msgid "Advanced Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+msgid "Scanning on your HP multi-function device"
 msgstr ""
-"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
-"bu xЙ™ta oldu: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Windows bölməsindəki boş sahəni işlət"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "Swap sahəsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "Böyüklüklərini seçin"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Loopback üçün Windows bölməsini işlət"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
-
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Var olan bölmələri işlədimmi"
+msgid "Root"
+msgstr "Kök"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
+msgid "Choose an existing RAID to add to"
+msgstr "Əlavə etmək üçün mövcud bir RAID seçin"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Use free space"
-msgstr "BoЕџ sahЙ™ni istifadЙ™ et"
-
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
-#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Bir swap sahЙ™sinЙ™ ehtiyacД±nД±z var"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "TГјrkcЙ™ (mГјasir \"Q\" klaviatura)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Lilo message not found"
 msgstr ""
-"Bir swap sahЙ™niz yoxdur\n"
-"Davam edim?"
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
 msgstr ""
-"Bir root disk bölümüna ehtiyacınız var.\n"
-"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
-"ya da yeni birini baЕџdan yaradД±n. Sonra \"BaДџlama \n"
-"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
+"/usr/include/linux/{autoconf,version}.h üçün \n"
+"/boot-da avtomatik Г§Й™kirdЙ™k baЕџlД±ДџД± yaradД±lmasД±."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
-"duyar.\n"
-"Bunun haqqД±nda %s dЙ™/a lazД±mi malumatlarД± tapa bilЙ™rsiniz"
+msgid "if needed"
+msgstr "lazД±m olarsa"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"TЙ™briklЙ™r, quruluЕџ bitdi.\n"
-"Cdrom vЙ™ disketi Г§Д±xartdД±qtan sonra Enter'Й™ basaraq kompГјterinizi \n"
-"yenidЙ™n baЕџladД±n. Linuks Mandrake'nin bu buraxД±lД±ЕџД±ndakД± yamaqlar haqqД±nda \n"
-"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
-"baxД±n.\n"
-"Sisteminizin qurДџularД± haqqД±nda daha geniЕџ bilgiyi Linuks Mandrake \n"
-"Д°stifadЙ™Г§i KitabcД±ДџД±nda tapa bilЙ™rsiniz."
+msgid "Restore Failed..."
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Description:\n"
 "\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
 "\n"
-"Warning\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
 "\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
 "\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
 "\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a ЕџЙ™bЙ™kЙ™. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
 "\n"
 "\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgstr ""
 
 #: ../../install_messages.pm:1
 #, c-format
@@ -3238,3486 +857,5226 @@ msgstr ""
 "Paris - France.\n"
 "For any question on this document, please contact MandrakeSoft S.A.  \n"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "BaЕџlanДџД±c addД±mД± `%s'\n"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Д°nternet qurДџularД±"
+
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Help"
-msgstr "YardД±m"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"ISA kartД±nД±z var isЙ™ sonrakД± ekrandakД± qiymЙ™tlЙ™r doДџru olmalД±dД±r.\n"
+"\n"
+"PCMCIA kartД±nД±z var isЙ™ kartД±nД±zД±n irq vЙ™ ya io'sunu bilmЙ™lisiniz.\n"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "not configured"
-msgstr "yenidЙ™n quraЕџdД±r"
+msgid "Do not print any test page"
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configure"
-msgstr "Qur"
+msgid "Gurmukhi"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "YenЙ™ dЙ™ davam edЙ™k?"
+msgid "Force No APIC"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "There was an error installing packages:"
-msgstr "PaketlЙ™r qurulurkЙ™n bir xЙ™ta oldu:"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Bu parol Г§ox sadЙ™dir (en az %d xarakter boyunda olmalД±dД±r)"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Klaviatura"
+
+#: ../../network/network.pm:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "PaketlЙ™ri istЙ™rkЙ™n bir xЙ™ta oldu:"
+msgid "FTP proxy"
+msgstr "FTP vЙ™kil verici"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Sistemi qur"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Fayldan geri Г§aДџД±r"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Show only for the selected day"
+msgstr "Təkcə bu gününkünü göstər"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Cd-Romu dЙ™yiЕџdirin!\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
 "\n"
-"\"%s\" adlД± Cd-Romu sГјrГјcГјnГјzЙ™ taxД±n vЙ™ OLDU'ya basД±n.\n"
-"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Refuse"
-msgstr "RЙ™dd Et"
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Accept"
-msgstr "QЙ™bul Et"
+msgid "Logs"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Installing package %s"
-msgstr "%s paketi qurulur"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "%d packages"
-msgstr "%d paket"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "No details"
-msgstr "ЖЏtraflД±"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "What kind of card do you have?"
+msgstr "Hansı növ kartınız var?"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Details"
-msgstr "ЖЏtraflД±"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
+msgid "Security"
+msgstr "TЙ™hlГјkЙ™sizlik"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Time remaining "
-msgstr "Qalan mГјddЙ™t"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Estimating"
-msgstr "TЙ™xmini olaraq hesaplanД±r"
+msgid "<control>Q"
+msgstr "<control>Q"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Гњmumi"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Installing"
-msgstr "Qurulur"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Qurmaq istədiyiniz paketləri seçin"
+msgid "Network Configuration"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Qurulumdan Г§Д±x"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Paket seçkilərini saxla"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"BГјtГјn dГјnya \n"
+" D-Channel'lЙ™ xaric (kiralД±q xЙ™tlЙ™r)"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be a number!"
+msgstr ""
+
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "DisketЙ™ qeyd et"
+msgid "Notice"
+msgstr "NoVД°deo"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- ЖЏvvЙ™lki"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Install"
-msgstr "Qurulum"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "Avtomatik seçili paketləri göstər"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsiniz. YenilЙ™nmЙ™lidir"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Nəcə bölməlandirmə istəyirsən?"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
-"Bu paket yenilЙ™nmЙ™lidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsД±nД±z. ArtД±q qurulmuЕџdur."
+msgid "Interface"
+msgstr "Ara Гјz"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Bu lazД±mlД± bir paketdir, sistemdЙ™n Г§Д±xardД±la bilmЙ™z"
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
+msgid ""
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "Bölmə şəkilləndirilməsi"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "AЕџaДџД±dakД± paketlЙ™r sistemdЙ™n silinЙ™cЙ™klЙ™r"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ismarД±clar"
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "AЕџaДџД±dakД± paketlЙ™r qurulacaqdД±r"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "Verici"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
+msgid "Mexico"
+msgstr "Meksika"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "ЕћЙ™killЙ™ndirilir"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "ЖЏhЙ™miyyЙ™t: %s\n"
+msgid "Rwanda"
+msgstr "Rvanda"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Böyüklüyü: %d KB\n"
+msgid "Do you have any %s interfaces?"
+msgstr "Heç %s ara üzü var?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "BuraxД±lД±Еџ: %s\n"
+msgid "Switzerland"
+msgstr "İsveçrə"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Ad: %s\n"
+msgid "Brunei Darussalam"
+msgstr "Bruney DarГјssЙ™lim"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "XЙ™talД± paket"
+msgid "Remote lpd Printer Options"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "Other"
-msgstr "DigЙ™r"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Ümumi böyüklük: %d / %d Mb"
+msgid "Configure Internet Access..."
+msgstr "İnternet keçişini Qur..."
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "Norveçcə"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "SonrakД± ->"
+msgid "Danish"
+msgstr "Danimarka dili"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Fərdi paket seçkisi"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Açılışda XFree və konsolda numlock düyməsini\n"
+"avtomatik olaraq aç."
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Paket Qrup Seçkisi"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
 msgstr ""
-"Sizin sisteminizin qaynaqlarД± Г§atД±ЕџmД±r. Qurulum Й™rzindЙ™ problem yaЕџaya "
-"bilЙ™rsiniz\n"
-"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
-"dЙ™CDROMdan baЕџlatdД±ДџД±nД±z zaman,\n"
-" 'F1'Й™ basД±n vЙ™ 'text' yazaraq enter'Й™ basД±n."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Processors"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Automated"
-msgstr "AvtomatlaЕџdД±rД±lmД±Еџ"
+msgid "Bulgaria"
+msgstr "BolqarД±stan"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "BaДџlД± deyil"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Replay"
-msgstr "TЙ™krarla"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Svalbard vЙ™ Jan Mayen AdalarД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
 msgstr ""
-"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
-"bГјtГјn sabit disk mЙ™'lumatД± daxil edilЙ™cЙ™kdir!!\n"
-"(yə'ni başqa sistemi də qura bilmək üçün).\n"
-"\n"
-"Bu qurulumu takrar etmЙ™k istЙ™yЙ™ bilЙ™rsiniz axД±.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+msgid "partition %s is now known as %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Reboot"
-msgstr "Kök"
+msgid "Backup Other files..."
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
-msgstr ""
-"Bə'zi bölmələr bitdi.\n"
-"\n"
-"HЙ™qiqЙ™tЙ™n dЙ™ Г§Д±xmaq istЙ™yirsiniz?"
+msgid "SMB server IP"
+msgstr "SMB verici IP"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+msgid "Congo (Kinshasa)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "%s sГјrГјcГјsГјnЙ™ boЕџ bir disket yerlЙ™Еџdirin"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing HPOJ package..."
+msgstr "%s paketi qurulur"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
 msgstr ""
-"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
-"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Əmr-Seçənək-O-F düymələrini\n"
-" yenidЙ™n baЕџlarkЙ™n basД±n vЙ™ bunlarД± girin:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Sonra da bunlarД± yazД±n: shut-down\n"
-"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
+"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
+"lГјzГјm\n"
+"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
+"qurmayacaqsanД±z,\n"
+"ya da baЕџqa bir Й™mЙ™liyyat sistemi liloyu silЙ™rsa ya da lilo "
+"avadanlД±ДџД±nД±zlaiЕџlЙ™mЙ™zsЙ™\n"
+"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
+"rЙ™smini\n"
+"istifadЙ™ edЙ™rЙ™k dЙ™ bu disket yaradД±la bilЙ™r.\n"
+"Açılış disketi yaratmaq istəyirsiniz?\n"
+"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyədisklet "
+"yerlЙ™Еџdirin\n"
+"vЙ™ \"OLDU\" basД±n.\n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
+msgid ", USB printer \\#%s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Sistem yГјklЙ™yicini qur"
+msgid "Latvian"
+msgstr "Yeri"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "monthly"
 msgstr ""
-"aboot qurulumunda xata, \n"
-"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+msgid "Module name"
+msgstr "Modul adД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "Açılışda başladılır"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Use Incremental Backups"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Açılış yükləyici hazırlanır"
+msgid "First sector of drive (MBR)"
+msgstr "Diskin ilk sektoru (MBR)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Domain Admin Password"
+msgid "Joystick"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "SahЙ™(domain) adД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr "Elsalvador"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "NIS sahЙ™si"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "TanД±tma"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "NIS Server"
-msgstr "NIS Verici"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "TЙ™kmillЙ™ЕџdirmЙ™ iЕџi baЕџlaya bilmir !!!\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "NIS Domain"
-msgstr "NIS sahЙ™si"
+msgid "Name: "
+msgstr "Ad: "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "16 milyon rЙ™ng (24 bits)"
+
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "NIS"
+msgid "Allow all users"
+msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr ""
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Böyüklüyü dəyişdirilir"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "Kabel baДџlantД±sД±"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "NIS"
-msgstr "NIS istifadЙ™ et"
+msgid "User"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "Verici"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"Bölmə cədvəlinizi oxuya bilmirəm, dəyəsən biraz xarab olub:-(\n"
+"Xarab olmuЕџ bolmЙ™lЙ™ri dГјzЙ™ltmЙ™yЙ™ Г§alД±Еџacam.\n"
+"Amma bГјtГјn mЙ™'lumatlar itЙ™cЙ™kdir.\n"
+"Başqa bir yol isə DrakXin bölmə cədvəllərini yoxlamasını "
+"passivlЙ™ЕџdirmЙ™kdir.\n"
+"(xЙ™ta %s)\n"
+"\n"
+"Bütün bölmələri itirmək istəyirsiniz?\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LDAP Base dn"
+msgid "Do new backup before restore (only for incremental backups.)"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "TanД±tma"
+msgid "Printer on parallel port \\#%s"
+msgstr "Г‡ap Edici Ev sahibi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "Ad: "
+
+#: ../../raid.pm:1
 #, c-format
-msgid "LDAP"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid iflas etdi"
 
 #: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Button 3 Emulation"
+msgstr "DГјymЙ™ 3 emulyasiyasД±"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Local files"
-msgstr "Yerli Г‡ap Edici"
+msgid "Sending files..."
+msgstr "Fayla qeyd et"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "TanД±tma"
+msgid "Israeli (Phonetic)"
+msgstr "Д°srail (Fonetik)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Bu parol Г§ox sadЙ™dir (en az %d xarakter boyunda olmalД±dД±r)"
+msgid "access to rpm tools"
+msgstr ""
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "No password"
-msgstr "Parolsuz"
+msgid "edit"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Set root password"
-msgstr "Root parolunu qur"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must choose/enter a printer/device!"
+msgstr "Г‡ap Edici avadanlД±ДџД± URI"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Permission problem accessing CD."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Phone number"
+msgstr "Telefon nömrəsi"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Services"
-msgstr "avadanlД±q"
+msgid "Printer name, description, location"
+msgstr "Г‡ap Edici BaДџlantД±sД±"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "System"
-msgstr "Sistem modu"
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "Xahiş edirik istifadə üçün bir dil seçin."
 
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "QapД±"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Use Xinerama extension"
+msgstr "Xinerama ifadЙ™lЙ™rini iЕџlЙ™t"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "İstifadə ediləcək Açılış idarəcisi"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Kök"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"DГјzgГјn mkbootdisk aparД±la bilmir: \n"
+" %s \n"
+" %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "disabled"
-msgstr "passivlЙ™Еџdir"
+msgid "West Europe"
+msgstr "Avropa"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "FЙ™al"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Firewall"
-msgstr "Verici, Firewall/Ruter"
+msgid "Harddrake2 version %s"
+msgstr "Sabit disk seçkisi"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Security"
-msgstr "TЙ™hlГјkЙ™sizlik"
+msgid "Copying %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Security Level"
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+msgid "Choose color"
+msgstr "Monitorunuzu seçin"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Network"
-msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Dominikan RespublikasД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Svaziland"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
+msgid "Please check if you are using CDRW media"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "X ilə Açılış"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"Linuks Mandrakeni yükləmak üçün sürücüyü seçin.\n"
+"DiqqЙ™tli olun, sГјrГјcГјdЙ™ki bГјtГјn mЙ™'lumatlar silinЙ™cЙ™k\n"
+"vЙ™ geri gЙ™lmЙ™yЙ™cЙ™k."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hardware"
+msgid " on parallel port \\#%s"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV kartД±"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "%c ve %c duymeleri ile isД±qlandД±rД±lmД±s girisleri sece bilersiniz"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Sıravi 2 Düyməli Siçan"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Remove the logical volumes first\n"
+msgstr "MЙ™ntiqi ciltlЙ™ri birinci olaraq sil\n"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Isaretli secenek %d saniye icinde sistemi acacaq."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "BaЕџqa var?"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Д°nternet imkanД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Sound card"
-msgstr "SЙ™s kartД±"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "No printer"
-msgstr "Г‡ap Edicisiz"
+msgid "Enabling servers..."
+msgstr "XidmЙ™tlЙ™r fЙ™allaЕџdД±rД±lД±r..."
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Г‡ap Edici"
+msgid "Printing test page(s)..."
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Mouse"
-msgstr "Siçan"
+msgid "There is already a partition with mount point %s\n"
+msgstr "Onsuz da bağlama nöqtəsi %s olan bir bölmə var\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
+msgstr ""
+"Bu nöqtədə Linuks Mandrakeni sabit diskinizdə haraya quracağınıza\n"
+"qЙ™rar verЙ™cЙ™ksiniz. ЖЏgЙ™r diskiniz boЕџ isЙ™ vЙ™ ya bir baЕџqa sistem\n"
+"bütün yeri doldurmuş isə, o zaman diskinizdə Linuks Mandrake üçün\n"
+"yer açmalısınız. Ona görə də diski bölmələndirməlisiniz.\n"
+"Bölmələndirmə əsasən diskinizdə məntiqi sürücülər yaratmaqdan ibarətdir.\n"
+"\n"
+"Ümumiyyətlə bölmələndirmənin təsiri geri dönülməzdir.Ona görə də\n"
+"bu iЕџ Г§ox gЙ™rgin vЙ™ yorucudur. ЖЏgЙ™r Г¶zГјnГјzЙ™ inanmД±rsД±nД±z isЙ™ bu\n"
+"sehirbaz sizə yardım edər. Başlamadan əvvəl xahiş edirik əl kitabçanıza\n"
+"baxın. Və bu iş üçün bir az vaxt ayırın.\n"
+"\n"
+"\n"
+"Sizə ən az 2 bölmə lazımdır. Biri sistemin özünü köçürməsi üçün\n"
+"Digəri isə uydurma yaddaş (ya da digər adı ilə Swap) üçün.\n"
+"\n"
+"\n"
+"Əgər diskiniz onsuz da bölünmüş isə (əvvəlki sistemden ya da\n"
+"başqa bölmələndirmə vasitələri ilə hazırlanmış) quruluşda\n"
+"sadəcə olaraq o yerləri yükləmək üçün seçin.\n"
+"\n"
+"\n"
+"Əgər disk bölünməmiş ise, yuxarıdakı sehirbazdan istifadə edə bilərsiniz.\n"
+"Sisteminizin quruluЕџundan asД±lД± olaraq mГјxtЙ™lif imkanlarД±nД±z var:\n"
+"\n"
+"* Bütün diski sil: Linuks Mandrake qurmaq üçün bütün diskinizin\n"
+" üzərindəki bölmələri silər. Burada diqqətli olun.\n"
+" SildiklЙ™riniz Й™sla geri gЙ™lmЙ™z.\n"
+"\n"
+"\n"
+"* Windows bölməsindəki sahəni istifadə et: Sisteminizdə\n"
+" Microsoft Windows qurulu isЙ™ ve bГјtГјn diski Й™hatЙ™ edir isЙ™\n"
+" Linuks Mandrake üçün bir yer ayırmalısınız. Bunun üçün\n"
+" ya bГјtГјn diski silmЙ™lisiniz (\"BГјtГјn diski sil\" bax ya da\n"
+" \" Usta modu\" tövsiyələri) ya da yenidən bölmələndirməlisiniz.Bu iş heç "
+"bir mЙ™'lumat itkisi olmadan da edilЙ™ bilЙ™r.Bunun baЕџqa adД±\n"
+" eyni kompГјterdЙ™ hЙ™m Linuks Mandrake hЙ™m dЙ™ Windows qurulu olmasД±dД±r.\n"
+"\n"
+"\n"
+"t Bu seçkiyə getmədən əvvəl bir şeyi başa düşməlisiniz ki, yenidən "
+"bölmələndirmə ilə sizin Windows bölməsi kiçiləcəkdir.\n"
+" YЙ™'ni Windows altД±nda daha az disk sahЙ™sinЙ™ malik olacaqsД±nД±z.\n"
+"\n"
+"\n"
+"* Usta modu: Əgər əllə diski bölmək istəsəniz, bu modu seçin. Diqqətli "
+"olun.\n"
+" Bu mod gГјГ§lГјdГјr amma bir o qЙ™dЙ™r dЙ™ tЙ™hlГјkЙ™lidir. DiskinizdЙ™ki bГјtГјn "
+"bilgiyi asandlД±qla itirЙ™ bilЙ™rsiniz.\n"
+" Təcrübəsiz isəniz bunu seçməyin."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Timezone"
-msgstr "Vaxt Dilimi"
+msgid "Ukraine"
+msgstr "Ukrayna"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "TanД±tma"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Keyboard"
-msgstr "Klaviatura"
+msgid "External ISDN modem"
+msgstr "Xarici ISDN kart"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Summary"
-msgstr "MГјndЙ™ricat"
+msgid "if set to yes, report check result by mail."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Seçkiniz? (əsas %s) "
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS Verici"
+msgid " / Region"
+msgstr "Reyunion"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
+"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
+"Г‡ap vЙ™ziyyЙ™ti:\n"
+"%s\n"
+"\n"
+"DГјz mГј iЕџlЙ™yir?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Sisteminiz hansД± mЙ™qsЙ™dlЙ™ istifadЙ™ edilЙ™cЙ™k?"
+msgid "daily"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Bir Г§ap edici qurmaq istЙ™yirsiniz?"
+msgid "and one unknown printer"
+msgstr "Г‡ap Edicisiz"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Fork edilЙ™ bilmir: %s"
+msgid "Ireland"
+msgstr "Д°zlandiya dili"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "ЖЏks ГјnvanД±na baДџlantД± qurulur"
+msgid "kernel version"
+msgstr "Г§Й™yirdЙ™k buraxД±lД±ЕџД±"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "         Restore Configuration       "
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "ЖЏks ГјnvanД±na baДџlantД± qurulur"
+msgid "Is this the correct setting?"
+msgstr "DoДџrudur?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
 "\n"
-"Do you want to install the updates ?"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "%s sГјrГјcГјsГјnЙ™ boЕџ bir disket yerlЙ™Еџdirin"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
+msgid "Wizard Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Qurulum sonrasД± qurДџular"
+msgid "Autoprobe"
+msgstr "Avtomatik yoxla"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
+msgid "Backup system files..."
 msgstr ""
-"%s paketi qurulur\n"
-"%d%%"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "Qurulum hazД±rlanД±r"
+msgid "Can't use broadcast with no NIS domain"
+msgstr "NД°S domeyni olmadan translasiya iЕџlЙ™dilЙ™ bilmЙ™z"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "\"%s\" adlД± Cd-Rom"
+msgid "drakfloppy"
+msgstr "drakfloppy"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
 msgstr ""
-"AЕџaДџД±dakД± siyahД±dakД± bГјtГјn CD'lЙ™rЙ™ sahib isЙ™niz, OLDU'ya basД±n.\n"
-"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
-"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
-"basД±n."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "All"
-msgstr "HamД±sД±"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr ""
+msgid "Peru"
+msgstr "Peru"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Siçan avadanlığı: %s\n"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "\"Windows\"u sil"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "With X"
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
 msgstr ""
+"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Type of install"
+msgid "Select the font file or directory and click on 'Add'"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr "Seçili böyüklük var olandan daha böyükdür"
+msgid "Madagascar"
+msgstr "Madaqaskar"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Urpmi"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Cron not available yet as non-root"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "DisketdЙ™n geri Г§aДџД±r"
+msgid "System"
+msgstr "Sistem modu"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Package selection"
-msgstr "Paket Qrup Seçkisi"
+msgid "Do you want to use this feature?"
+msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "DisketЙ™ qeyd et"
+msgid "Arabic"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "DisketdЙ™n geri Г§aДџД±r"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
-msgstr ""
+"\n"
+"- Options:\n"
+msgstr "Seçənəklər"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Parol"
+
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "%d minutes"
 msgstr ""
-"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Looking for available packages..."
-msgstr "Mövcud olan paketlər axtarılır."
+msgid "Graphics card: %s"
+msgstr "Ekran kartД±: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Finding packages to upgrade..."
-msgstr "GГјncЙ™llЙ™nЙ™cЙ™k paketlar tapД±lД±r"
+msgid "WebDAV transfer failed!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsД±nД±z. ArtД±q qurulmuЕџdur."
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "XFree configuration"
+msgstr "XFree quraЕџdД±rД±lmasД±"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Mövcud olan paketlər axtarılır."
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Choose action"
+msgstr "Monitorunuzu seçin"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
+msgid "French Polynesia"
+msgstr "FransД±z PoloneziyasД±"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "XЙ™talД± bloklar sД±nansД±nmД±?"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "OKI 4w vЙ™ uyДџun Windows Г§ap edicilЙ™rini dЙ™stЙ™klЙ™."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "ALSA sЙ™s sistemini (Advanced Linux Sound Architecture) baЕџlat"
 
-#: ../../install_steps_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr ""
-"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
-"baЕџlatmalД±sД±nД±z."
+msgid "Installing driver for %s card %s"
+msgstr "%s kartı (%s) üçün sürücü yüklənir"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Bağlama nöqtələrini seçin"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "Databeyz"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Bağlama nöqtələri üçün bölmələr daranır"
+msgid "Ukrainian"
+msgstr "Ukrayna dili"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "uyğun bölmə tapılmadı"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring IDE"
-msgstr "IDE qapД±larД± qurulur"
+#, fuzzy, c-format
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "PCMCIA kartlar qurulur..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "\"Windows\"u sil"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "DГјymЙ™ 3 emulyasiyasД±"
+msgid "Firewire controllers"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Button 2 Emulation"
-msgstr "DГјymЙ™ 2 emulyasiyasД±"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
+"LILO (Linuks Yükləyici) və Grub açılış sistem yükləyiciləridir: sistemi "
+"Linuks\n"
+"ya da kompüterinizdə olan başqa bir əməliyyatiyle aça bilərlər.\n"
+"ЖЏsasЙ™n bu digЙ™r Й™mЙ™liyyat sistemlЙ™ri doДџru bir ЕџЙ™kilde tЙ™sbit edilib "
+"açılışa\n"
+"qurula bilЙ™rlЙ™r. ЖЏgЙ™r bir problem olarsa, buradan Й™llЙ™ Й™lavЙ™ edilЙ™ "
+"bilЙ™rlЙ™r.\n"
+"Parametrlər mövzusunda diqqətli olun."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "DГјymЙ™ emulyasiyasД±"
+msgid "System mode"
+msgstr "Sistem modu"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
+"edici \n"
+"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Netmask"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
+msgid "Append"
+msgstr "Sonuna Й™lavЙ™ et"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Siçan Qapısı"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Parollar uyДџun gЙ™lmir"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "GГјncЙ™llЙ™mЙ™"
+#, c-format
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"Avtomatik qurulum disketi hazırlanması seçilərsə,\n"
+"bГјtГјn sabit disk mЙ™'lumatД± daxil edilЙ™cЙ™kdir!!\n"
+"(yə'ni başqa sistemi də qura bilmək üçün).\n"
+"\n"
+"Bu qurulumu takrar etmЙ™k istЙ™yЙ™ bilЙ™rsiniz axД±.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Bu bir qurulum mu, yoxsa gГјncЙ™llЙ™mЙ™midir?"
+msgid "Network printer \"%s\", port %s"
+msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Qurulum/GГјncЙ™llЙ™mЙ™"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Bütün mövcud klaviaturaların siyahısı"
+msgid "OK to restore the other files."
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
 msgid "Please choose your keyboard layout."
 msgstr "Klaviatura quruluşunu seçiniz."
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Quit"
-msgstr "Г‡Д±x"
+msgid "Printer Device URI"
+msgstr "Г‡ap Edici avadanlД±ДџД± URI"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "License agreement"
-msgstr "Lisenziya sözləşməsi"
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "An error occurred"
-msgstr "Bir xЙ™ta oldu"
+msgid "Terminal-based"
+msgstr "Terminal Й™saslД±"
 
-#: ../../install_steps_newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid "Installing a printing system in the %s security level"
 msgstr ""
-"  <Tab>/<Alt-Tab> irЙ™li/geri  |  <BoЕџluq> iЕџarЙ™tlЙ™  |  <F12> sonrakД± ekran"
 
-#: ../../install_steps_newt.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Bu istifadЙ™Г§i adД± artД±q vardД±r"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Linuks-Mandrake Qurulumu %s"
+msgid "Other OS (windows...)"
+msgstr "DigЙ™r sistemlЙ™r (windows...)"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Disket sГјrГјcГј yoxdur"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "%s SisteminЙ™ XoЕџgЙ™lmiЕџsiniz"
+msgid "Generate auto install floppy"
+msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
 msgstr ""
-"BЙ™zi paketlЙ™r doДџru olaraq qurulumu bitirmЙ™di.\n"
-"cdrom sГјrГјcГјnГјz ya da cdromunuz dГјzgГјn iЕџlЙ™mir.\n"
-"ЖЏvvЙ™ldЙ™n Linuks qurulu bir sistemdЙ™ \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
-"istifadЙ™ edЙ™rЙ™k Cd-Rom'u yoxlayД±n.\n"
 
-#: ../../install_steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "%s bağlama nöqtəsini çoxalt"
+msgid "Somalia"
+msgstr "Somali"
 
-#: ../../install_steps.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
+msgid "No open source driver"
+msgstr ""
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
 msgstr ""
-"Bir xЙ™ta oldu, fЙ™qЙ™t necЙ™ dГјzЙ™ldilЙ™cЙ™yini bilmirЙ™m.\n"
-"Davam edin, riski sizЙ™ aitdir!"
+"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
+"tamamilЙ™ qapalД±dД±r.\n"
+"TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™si indi Й™n ГјstdЙ™dir."
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Xahiş edirik gözləyin"
+msgid "Nicaragua"
+msgstr "Nikaraqua"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ok"
-msgstr "Oldu"
+msgid "New Caledonia"
+msgstr "Yeni Kaledoniya"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
-#, c-format
-msgid "Finish"
-msgstr "Qurtar"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Avropa (EDSS1)"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../any.pm:1
 #, c-format
-msgid "Basic"
-msgstr ""
+msgid "Video mode"
+msgstr "Ekran modu"
 
-#: ../../interactive.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "ЖЏtraflД±"
+msgid "Oman"
+msgstr "Oman"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Remove"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Network Monitoring"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Modify"
-msgstr "TЙ™kmillЙ™Еџdir"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "MB cinsindən böyüklük: "
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Add"
-msgstr "ЖЏlavЙ™ et"
+msgid "Partition table type: %s\n"
+msgstr "Bölmə cədvəli növü: %s\n"
 
-#: ../../interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Monitorunuzu seçin"
+msgid "Authentication Windows Domain"
+msgstr "TanД±tma"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
-msgstr ""
+msgid "US keyboard"
+msgstr "Amerikan (US) klaviaturasД±"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
+msgid "Buttons emulation"
+msgstr "DГјymЙ™ emulyasiyasД±"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
+msgid ", network printer \"%s\", port %s"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "\"Menu\" key"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Fayla qeyd et"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Halt bug"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr ""
+msgid "Tokelau"
+msgstr "Tokelo"
 
 #: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bosnian"
+msgstr "Estoniya dili"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Xahiş edirik gözləyin"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "Bağlantı növü:"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Namibia"
+msgstr "Namibiya"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Databeyz"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "special capacities of the driver (burning ability and or DVD support)"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Right Alt key"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"Sizin kartД±nД±zД±n 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™yi ola bilЙ™r, amma sadecЙ™ olaraq "
+"XFree %s\n"
+"ilЙ™ dГјzgГјn iЕџlЙ™yЙ™r.\n"
+"DД°QQЖЏT! BU SINAQ MЖЏRHЖЏLЖЏSINDЖЏDIR VЖЏ KOMPГњTERД°NД°Z DONDURA BILЖЏR.\n"
+"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
+"bir seçki olar."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Yugoslavca (latД±n/kiril)"
+msgid "Please wait, setting security options..."
+msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vyetnam dili \"numeric row\" QWERTY"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "Amerikan (US) klaviaturasД± (beynЙ™lmilЙ™l)"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Açılışda X-Window sistemini başlat"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "US keyboard"
-msgstr "Amerikan (US) klaviaturasД±"
+msgid "hourly"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "UK keyboard"
-msgstr "Д°ngiliz (UK) klaviaturasД±"
+msgid "          Successfuly Restored on %s       "
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Ukrayna dili"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "TГјrkcЙ™ (mГјasir \"Q\" klaviatura)"
+msgid "Antigua and Barbuda"
+msgstr "Antiq vЙ™ Barbuda"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "TГјrkcЙ™ (Й™nЙ™nЙ™vi \"F\" klaviatura)"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
 
 #: ../../keyboard.pm:1
+#, c-format
+msgid "Spanish"
+msgstr "Д°spanca"
+
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Thai klaviatura"
+msgid "Start"
+msgstr "Hal:"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Thai klaviatura"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "ErmenicЙ™ (yazД± maЕџД±nД±)"
+msgid "Configuring applications..."
+msgstr "Г‡ap Edicini Qur"
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "Normal modem tЙ™sbiti"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "AzЙ™rbaycanca (kiril)"
+msgid "File Selection"
+msgstr "Paket Qrup Seçkisi"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Slovakca (QWERTY)"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Slovakca (QWERTZ)"
+msgid "CUPS"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Slovenian"
-msgstr "SlovencЙ™"
+msgid "Run config tool"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "İsveçcə"
+msgid "Bootloader installation"
+msgstr "Açılış yükləyici quruluşu"
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Rusca (Yawerty)"
+msgid "Root partition size in MB: "
+msgstr "Kök (root) bölməsi böyüklüyü (Mb): "
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Russian"
-msgstr "Rusca"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Bu lazД±mlД± bir paketdir, sistemdЙ™n Г§Д±xardД±la bilmЙ™z"
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "Rusca (Yawerty)"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Etherboot ISO image is %s"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "Rusca (Yawerty)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) verici adlarД±nД± IP ГјnvanlarД±na Г§evirЙ™n\n"
+"SahЙ™ AdД± Vericisidir(DNS)."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "FransД±zca (Kanada/Quebec)"
+msgid "Disconnect..."
+msgstr "BaДџlantД±nД± KЙ™s..."
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "Portuqalca"
+msgid "Saint Lucia"
+msgstr "MГјqЙ™ddЙ™s Lusiya"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "QapД±"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polyakca (QWERTZ sД±rasД±)"
+msgid "Palau"
+msgstr "Palau"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polyakca (QWERTY sД±rasД±)"
+msgid "level"
+msgstr "sЙ™viyyЙ™"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Norwegian"
-msgstr "Norveçcə"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "Hollandiya dili"
+msgid "Package Group Selection"
+msgstr "Paket Qrup Seçkisi"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Maltese (US)"
+msgid "Restore Via Network Protocol: %s"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Maltese (UK)"
+msgid "You can configure each parameter of the module here."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "AzЙ™rbaycanca (kiril)"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "Rezolyusiya və rəng dərinliyini seçin"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Myanmar (Burmese)"
+msgid "Emulate third button?"
+msgstr "3 dГјymЙ™ emulasiyasД±"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Macedonian"
-msgstr "Makedoniya dili"
+msgid "Mount"
+msgstr "BaДџla"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Creating auto install floppy"
+msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Sistemi qur"
+
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Malayalam"
+msgid "text box height"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Latvian"
-msgstr "Yeri"
+msgid "State"
+msgstr "Hal:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Litvanya dili \"Fonetik\" QWERTY"
+msgid "Be sure a media is present for the device %s"
+msgstr "%s avadanlД±ДџД±nda medya olduДџundan Й™min olun"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Litvanya dili \"number row\" QWERTY"
+msgid "Enable multiple profiles"
+msgstr "BirdЙ™n artД±q profilЙ™ icazЙ™ ver"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Litvanya dili AZERTY (yeni)"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Litvaniya dili AZERTY (köhnə)"
+msgid "Local printer"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Laotian"
-msgstr "Yeri"
+msgid "Package selection"
+msgstr "Paket Qrup Seçkisi"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Latin American"
-msgstr "LatД±n Amerika dili"
+msgid "Mauritania"
+msgstr "Mavritaniya"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Koreya klaviaturasД±"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Yaponca 106 dГјymЙ™li"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Inuktitut"
-msgstr ""
+msgid "All primary partitions are used"
+msgstr "Bütün birinci bölmələr istifadədədir"
 
-#: ../../keyboard.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Italian"
-msgstr "Д°talyanca"
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
+msgstr ""
+"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
+"verici adД± xЙ™sarЙ™tlЙ™ri meydana gЙ™lЙ™ bilЙ™r."
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Icelandic"
-msgstr "Д°zlandiya dili"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Iranian"
-msgstr "Farsca"
+msgid "Configuring IDE"
+msgstr "IDE qapД±larД± qurulur"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "Monitor qurulmayД±b"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "Siçan qurğuları"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Д°srail (Fonetik)"
+msgid "Cocos (Keeling) Islands"
+msgstr "Kokos AdasД±"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Д°nternetЙ™ baДџlan"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "Д°srail"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
 
-#: ../../keyboard.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Croatian"
-msgstr "XД±rvatca"
+msgid "Provider phone number"
+msgstr "İXM telefon nömrəsi"
 
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "Ev sahibi adД±"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "Macarca"
+msgid "Armenia"
+msgstr "ErmЙ™nistan"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Gurmukhi"
-msgstr ""
+msgid "Fiji"
+msgstr "Fici"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Greek"
-msgstr "Yunanca"
+msgid "Second floppy drive"
+msgstr "Д°kinci disket sГјrГјcГј"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "GГјrcГј dili (\"LatД±n\" sД±rasД±)"
+msgid "About Harddrake"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "GГјrcГј dili (\"Rus\" sД±rasД±)"
+msgid "Drive capacity"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "French"
-msgstr "FransД±zca"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Disket sГјrГјcГјyЙ™ bir disket yerlЙ™Еџdirin\n"
+"Bu disketdЙ™ki bГјtГјn mЙ™'lumatlar yox olacaqdД±r"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "FincЙ™"
+msgid "Size: %s"
+msgstr "Böyüklüyü: %s"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "Д°spanca"
+msgid "Control and Shift keys simultaneously"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Estonian"
-msgstr "Estoniya dili"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "secondary"
+msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "View Backup Configuration."
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norveçcə)"
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "No password"
+msgstr "Parolsuz"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Danimarka dili"
+msgid "Nigeria"
+msgstr "Nigeriya"
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Devanagari"
+msgid "There is no existing partition to use"
+msgstr "Bölmə cədvəli qurtarılmağa çalışılır"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
 msgstr ""
+"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi  adını ve "
+"mümkünsə, qapısının nömrəsini verməlisiniz."
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Almanca (Г¶lГј dГјymЙ™lЙ™r olmasД±n)"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hard drive information"
+msgstr "Sabit disk seçkisi"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "German"
-msgstr "Almanca"
+msgid "Russian"
+msgstr "Rusca"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Г‡ex dili (QWERTY)"
+msgid "Jordan"
+msgstr "Д°ordaniya"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid iflas etdi"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "Uzaq Г‡ap Edici"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Г‡ex dili (QWERTZ)"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "İsveçcə (Fransız sırası)"
+msgid "Sorry, no floppy drive available"
+msgstr "BaДџД±ЕџlayД±n, disket sГјrГјcГј yoxdur"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "İsveçcə (Alman sırası)"
+msgid "Bolivia"
+msgstr "Boliviya"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Belarusian"
-msgstr "Belarusca"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estoniya dili"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Bad package"
+msgstr "XЙ™talД± paket"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Brazilya dili (ABNT-2)"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Bulqarca"
+msgid "DrakSec Basic Options"
+msgstr "Seçənəklər"
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "ErmenicЙ™ (fonetik)"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Romania"
+msgstr "RuminД±ya"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Bengali"
-msgstr "fЙ™allaЕџdД±r"
+msgid "choose device"
+msgstr "Açılış avadanlığı"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Belçika dili"
+msgid "Canada"
+msgstr "Kanada"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "AzЙ™rbaycanca (latД±n)"
+msgid "Remove from LVM"
+msgstr "LVMdЙ™n ayД±r"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Arabic"
-msgstr ""
+msgid "Timezone"
+msgstr "Vaxt Dilimi"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Armenian (phonetic)"
-msgstr "ErmenicЙ™ (fonetik)"
+msgid "German"
+msgstr "Almanca"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "ErmenicЙ™ (yazД± maЕџД±nД±)"
+msgid "Next ->"
+msgstr "SonrakД± ->"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Ermenicə (köhnə) "
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Albanian"
-msgstr "Farsca"
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
+msgstr ""
+"\n"
+"Bəlkə də bu bir Sürücü bölməsidir.\n"
+"Onda bunu ele belЙ™cЙ™ buraxД±n.\n"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Polish"
-msgstr "Polyakca"
+msgid "Guinea-Bissau"
+msgstr "Qvineya Bissau"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Horizontal refresh rate"
+msgstr "ГњfГјqi yenilЙ™mЙ™ sГјr'Й™ti"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "Zimbabve"
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+msgstr ""
+"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
+"nöqtəsindən ayrıla bilinmir.\n"
+"ЖЏvvЙ™lcЙ™ loopback-Д± lЙ™Дџv edin."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Zambia"
-msgstr "Zambiya"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "South Africa"
-msgstr "CЙ™nubi Afrika"
+msgid "USB controllers"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, fuzzy, c-format
-msgid "Serbia"
-msgstr "serial"
+msgid "What norm is your TV using?"
+msgstr "ISDN bağlantınızın növü nədir?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Mayotte"
-msgstr "Mayot"
+msgid "Type:"
+msgstr "Növ: "
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yemen"
-msgstr "YЙ™mЙ™n"
+msgid "Share name"
+msgstr "PaylaЕџdД±rma adД±"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Samoa"
-msgstr "Samoa"
+msgid "enable"
+msgstr "fЙ™allaЕџdД±r"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Wallis and Futuna"
-msgstr "Vallis vЙ™ Futuna AdalarД±"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "ЖЏks ГјnvanД±na baДџlantД± qurulur"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Vanuatu"
-msgstr "Vanuatu"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr ""
+"ЕћЙ™bЙ™kЙ™nin yenidЙ™n baЕџladД±lmasД± sД±rasД±nda xЙ™ta oldu: \n"
+"\n"
+"%s"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Vietnam"
-msgstr "Vyetnam"
+msgid "Remove the loopback file?"
+msgstr "Loopback faylД± ЕџЙ™killЙ™ndirilir: %s"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Virgin AdalarД± (ABЕћ)"
+msgid "Selected size is larger than available space"
+msgstr "Seçili böyüklük var olandan daha böyükdür"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Virgin AdalarД± (Britaniya)"
+msgid "NCP server name missing!"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Venezuela"
-msgstr "Venezuela"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "Xahiş edirik siçanınızın növünü seçin."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "MГјqЙ™ddЙ™s Vinsent vЙ™ Qrenadin"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Vatican"
+msgid "Laotian"
 msgstr "Yeri"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "Г–zbЙ™kistan"
+msgid "Samoa"
+msgstr "Samoa"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Uruguay"
-msgstr "Uruqvay"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
+msgstr ""
+"rstat protokolu bir ЕџЙ™bЙ™kЙ™dЙ™kД± istifadЙ™Г§ilЙ™rin o ЕџЙ™bЙ™kЙ™dЙ™kД± hЙ™r hansД± bir\n"
+"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Birləşmiş Ştatlar yanı Kiçik Adalar"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Uganda"
-msgstr "Uqanda"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Ekran kartınızı seçin"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Ukraine"
-msgstr "Ukrayna"
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "DiqqЙ™t: Bu qrafika kartД± ilЙ™ edilЙ™cЙ™k sД±naq tЙ™hlГјkЙ™lidir"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Tanzania"
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr ""
+"İstifadəçi adında sadacə kiçik hərflər, rəqəmlər, `-' və `_' xarakterləri "
+"ola bilЙ™r"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Tayland"
+msgid "Menudrake"
+msgstr "Usta"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Tuvalu"
-msgstr "Tuvalu"
+msgid "Welcome To Crackers"
+msgstr "KrakerlЙ™rЙ™ xoЕџgЙ™lmiЕџsiniz"
 
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr "Trinidad vЙ™ Tobaqo"
+msgid "Module options:"
+msgstr "Modul seçənəkləri:"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Turkey"
-msgstr "TГјrkiyЙ™"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Tonqa"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "ЕћЙ™bЙ™kЙ™ QurДџularД±"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr "Tunis"
+msgid "Abort"
+msgstr "DayandД±r"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turkmenistan"
-msgstr "TГјrkmЙ™nistan"
+msgid "No password prompt on %s at port %s"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "ЕћЙ™rqi Timor"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr "Tokelo"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "BoЕџ sahЙ™ni istifadЙ™ et"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tajikistan"
-msgstr "Tacikistan"
+msgid "\t-CDROM.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Thailand"
-msgstr "Tayland"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Sizin Windows bölümü çox dağınıqdır. Daxiş edirik, əvvəlcə birləşdirin "
+"(defraq)"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Togo"
-msgstr "Toqo"
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norveçcə)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "French Southern Territories"
-msgstr "CЙ™nubi FransД±z SahЙ™lЙ™ri"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Chad"
-msgstr "Г‡ad"
+msgid "Unable to fork: %s"
+msgstr "Fork edilЙ™ bilmir: %s"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "TГјrk vЙ™ Kaykos AdalarД±"
+msgid "Type: "
+msgstr "Növ: "
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Swaziland"
-msgstr "Svaziland"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "DHCP AlД±cД±sД±"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Syria"
-msgstr "Surinam"
+msgid "no fonts found"
+msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "El Salvador"
-msgstr "Elsalvador"
+msgid "Mouse"
+msgstr "Siçan"
 
-#: ../../lang.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr "Sao Tome vЙ™ Prinsip"
+msgid "not enough room in /boot"
+msgstr "/boot içində lazımi yer yoxdur"
 
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Suriname"
-msgstr "Surinam"
+msgid "Choosing an arbitratry driver"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Somalia"
-msgstr "Somali"
+msgid "Host name"
+msgstr "Ev sahibi adД±"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Senegal"
-msgstr "Seneqal"
+msgid "Liechtenstein"
+msgstr "LixtenЕџteyn"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "San Marino"
-msgstr "San Marino"
+msgid "the color of the progress bar"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Sierra Leone"
-msgstr "Siera Lione"
+msgid "Suppress Fonts Files"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Slovakia"
-msgstr "Slovakiya"
+msgid "Add to RAID"
+msgstr "RAIDЙ™ Й™lavЙ™ et"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Svalbard vЙ™ Jan Mayen AdalarД±"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
+"Burada yaboot üçün həm başqa əməliyyat sistemləri, həm alternativ "
+"kernellЙ™r,\n"
+" ya da təcili yardım açılış əksləri əlavə edə bilərsiniz.\n"
+"\n"
+"\n"
+"Başqa OSlər  üçün girişin mənası ad və kök çığırından ibarətdir.\n"
+"\n"
+"\n"
+"Linuks üçün mühtəməl girişlər bunlar ola bilər: \n"
+"\n"
+"\n"
+"  - Ad: Bu sadəcə olaraq yaboot üçün açılacaq sistemi timsal edən bir "
+"addД±r.\n"
+"\n"
+"\n"
+"  - Əks: Bu isə açılacaq çəkirdəyin, yə'ni kernelin adıdır.  Çox vaxt bu "
+"vmlinux vЙ™ ya\n"
+"bunun variasiyalarД±dД±r.\n"
+"\n"
+"\n"
+"  - Kök: Linuks qurulumunun kök avadanlığı və ya '/'.\n"
+"\n"
+"\n"
+"  \n"
+"  - Əlavə: Apple avadanlıqlarında kernel əlavə seçənəkləri ilə sıxlıqla "
+"baЕџlanДџД±c\n"
+"video avadanlığı və ya sıx sıx xəta verən 2ci və 3cü siçan düymələri üçün "
+"emulyasiya\n"
+"imkanlarД± tanД±na bilir.  MЙ™sЙ™lЙ™n bunlar \n"
+"bir neçə nümunədir:\n"
+"\n"
+"\n"
+"\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"hda=autotune\n"
+"\n"
+"\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n"
+"\n"
+"\n"
+" \n"
+"  - Initrd: Açılış avadanlığından əvvəl bə'zi açılış modullarını seçmək\n"
+"üçün işlədilir, ya da təcili yardım açılışlarında ramdisk əksini yükləmək "
+"imkanД± verir.\n"
+"\n"
+"\n"
+"  - Initrd-size: Ana ramdisk böyüklüyü ümumiyyətlə 4096 baytdır.  Əgər daha "
+"geniЕџ ramdisk bildirЙ™\n"
+"bilərsiniz isə bu seçənəyi işlədin.\n"
+"\n"
+"\n"
+"  - Oxuma-yazma: Normalda sistemin 'dirilmЙ™sindЙ™n' Й™vvЙ™l bЙ™'zi sД±naqlarД±n "
+"aparıla bilməsi üçün\n"
+"'root' fayl sistemi bu moda soxulur.  Bu seçənəyi nəzərə almayabilərsiniz.\n"
+"\n"
+"\n"
+"  - NoVideo: BЙ™lkЙ™ Apple video avadanlД±ДџД± problem Г§Д±xarda bilЙ™r.Onda bu "
+"seçənəklə\n"
+"sistemi 'novideo' modda təbii framebuffer dəstəyi ilə aça bilərsiniz.\n"
+"\n"
+"\n"
+"  - Əsas: Bu seçənəklə Linuks sistemi əsas əməliyyat sistemi halına gətirə "
+"bilЙ™rsiniz.\n"
+"Onda ENTER düyməsinə basmaqla Linuks sistemi açılacaqdır.  Bu giriş ayrıca "
+"TAB ilə açılış seçkilərinə baxdığınız vaxt \n"
+"'*' iЕџarЙ™tilЙ™ iЕџД±qlandД±rД±lacaqdД±r."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Slovenia"
-msgstr "Sloveniya"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Helena"
-msgstr "MГјqЙ™ddЙ™s Helena"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "Disket sГјrГјcГј yoxdur"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Singapore"
-msgstr "Sinqapur"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sudan"
-msgstr "Sudan"
+msgid "Continue anyway?"
+msgstr "Davam edilsin?"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Seychelles"
-msgstr "SeyЕџel"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Solomon Islands"
-msgstr "Solomon AdalarД±"
+msgid "Printer"
+msgstr "Г‡ap Edici"
 
 #: ../../lang.pm:1
 #, c-format
 msgid "Saudi Arabia"
 msgstr "SЙ™udiyyЙ™ ЖЏrЙ™bistan"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr "Rvanda"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Rusca"
+msgid "Internet"
+msgstr "Д°nternet"
 
-#: ../../lang.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Romania"
-msgstr "RuminД±ya"
+msgid "Some devices were added:\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Reunion"
-msgstr "Reyunion"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "GeometriyasД±: %s silindr, %s baЕџ, %s sektor\n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Qatar"
-msgstr "Katar"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Palau"
-msgstr "Palau"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Tape"
+msgstr "Bölmə cədvəlini qurtar"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Paraguay"
-msgstr "Paraqvay"
+msgid "Choose the profile to configure"
+msgstr "Qurulacaq profili seçin"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Portugal"
-msgstr "Portuqaliya"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Palestine"
-msgstr "Paket seçkilərini saxla"
+msgid "Backup Now from configuration file"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Г‡ap edici adД± tЙ™kcЙ™ hЙ™rf, rЙ™qЙ™m vЙ™ alt xЙ™tt daxil edЙ™ bilЙ™r"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "Porto Riko"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Pitcairn"
-msgstr "Pitkairn"
+msgid "See hardware info"
+msgstr "AvadanlД±q mЙ™'lumatД±na bax"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "MГјqЙ™ddЙ™s Pyer vЙ™ Migelion"
+msgid "First sector of boot partition"
+msgstr "Açılış qisminin ilk sektoru"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Poland"
-msgstr "PolЕџa"
+msgid "Printer manufacturer, model"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Pakistan"
-msgstr "Pakistan"
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Filippin"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Papua New Guinea"
-msgstr "Papua Yeni Qvineya"
+msgid "Subnet Mask:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "French Polynesia"
-msgstr "FransД±z PoloneziyasД±"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Peru"
-msgstr "Peru"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Buradaki iki vacib parametr ГјfГјqi ve Еџaquli yenilЙ™mЙ™ sГјr'Й™tlЙ™ridir.\n"
+"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
+"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
+"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Panama"
-msgstr "Panama"
+msgid "Modify"
+msgstr "TЙ™kmillЙ™Еџdir"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Oman"
-msgstr "Oman"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New Zealand"
-msgstr "Yeni Zellandiya"
+msgid "Need hostname, username and password!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Niue"
-msgstr "Niu"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Nauru"
-msgstr "Nauru"
+msgid "HardDrake"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Nepal"
-msgstr "Nepal"
+msgid "new"
+msgstr "yeni"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Bir Г§ap edici qurmaq istЙ™yirsiniz?"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Nikaraqua"
+msgid "Wizard"
+msgstr "Sehirbaz"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "%s tapД±ldД±"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Nigeria"
-msgstr "Nigeriya"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr ""
+"Bölmə cəvəlindəki dəyişikliklərin daxil olması üçün kompüterinizi yenidən "
+"baЕџlatmalД±sД±nД±z."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Norfolk Island"
-msgstr "Norfolk AdalarД±"
+msgid "Do not include the browser cache"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Niger"
-msgstr "Niger"
+msgid "Please, choose your keyboard layout."
+msgstr "Klaviatura quruluşunu seçiniz."
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "New Caledonia"
-msgstr "Yeni Kaledoniya"
+msgid "Standard"
+msgstr "Standart"
 
-#: ../../lang.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Namibia"
-msgstr "Namibiya"
+msgid "Please choose your mouse type."
+msgstr "Xahiş edirik siçanınızın növünü seçin."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Mozambique"
-msgstr "Mozambiq"
+msgid "Connect..."
+msgstr "BaДџlan..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Г‡ap Edicini Qur"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "yenidЙ™n quraЕџdД±r"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Malaysia"
-msgstr "Malayziya"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "DayandД±r"
+
+#: ../../network/network.pm:1
 #, c-format
-msgid "Mexico"
-msgstr "Meksika"
+msgid "Proxies configuration"
+msgstr "VЙ™kil vericilЙ™r quraЕџdД±rД±lmasД±"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Malawi"
-msgstr "Malavi"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Maldives"
-msgstr "Maldiv"
+msgid "Start: sector %s\n"
+msgstr "BaЕџlanДџД±c: sektor %s\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "Monitor qurulmayД±b"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mauritius"
-msgstr "Maurit"
+msgid "Couldn't access the floppy!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Malta"
-msgstr "Malta"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Mail Server"
+msgstr "Databeyz"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Montserrat"
-msgstr "Montserrat"
+msgid "Please click on a partition"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Mauritania"
-msgstr "Mavritaniya"
+msgid "Linux"
+msgstr "Linuks"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Martinique"
-msgstr "Martiniq"
+msgid "Have a nice day!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr "Ећimali Marian AdalarД±"
+msgid "across Network"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Mongolia"
-msgstr "Monqolustan"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "GГјncЙ™llЙ™mЙ™"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Myanmar"
-msgstr "Myanmar"
+msgid "Select Printer Connection"
+msgstr "Çap Edici Bağlantısı Seçin"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Mali"
-msgstr "Mali"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Macedonia"
-msgstr "Makedoniya"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "MarЕџal AdalarД±"
+msgid "IP Range Start:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Madagascar"
-msgstr "Madaqaskar"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (qД±saca inetd ) bir Г§ox \n"
+"baЕџqa internet xidmЙ™tcisini lazД±m gЙ™ldiyi zaman iЕџa salД±r. Д°Г§indЙ™ telnet, "
+"ftp, rsh vЙ™ rlogin kimi proqramД±n olduДџu xidmЙ™tlЙ™ri iЕџЙ™ salmaqla mЙ™s'uldur.\n"
+"inetd-ni sistemden Г§Д±xarmaq, onun mЙ™s'ul olduДџu bГјtГјn xidmЙ™tlЙ™ri\n"
+"rЙ™dd etmЙ™k mЙ™nasД±nД± daЕџД±yД±r."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Moldova"
-msgstr "Moldova"
+msgid "the height of the progress bar"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Monaco"
-msgstr "Monako"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Morocco"
-msgstr "MЙ™rakeЕџ"
+msgid "Argentina"
+msgstr "Argentina"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Libya"
-msgstr "Liberiya"
+msgid "Domain Name Server"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Latvia"
-msgstr "Latviya"
+msgid "Mount points must begin with a leading /"
+msgstr "Bağlama nöqtələri / ilə başlamalıdır"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Postfix mЙ™ktub vericisi, Inn xЙ™bЙ™r vericisi"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr "LГјksemburq"
+msgid "Quit without saving"
+msgstr "Qeyd etmЙ™dЙ™n Г‡Д±x"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Lithuania"
-msgstr "Litvaniya"
+msgid "Yemen"
+msgstr "YЙ™mЙ™n"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Lesotho"
-msgstr "Lesoto"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Liberia"
-msgstr "Liberiya"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "Ећri Lanka"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Liechtenstein"
-msgstr "LixtenЕџteyn"
+msgid "Hard drive detection"
+msgstr "Sabit disk seçkisi"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr "MГјqЙ™ddЙ™s Lusiya"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Xahiş edirik siçanınızı seçin"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Lebanon"
-msgstr "Livan"
+msgid "Tajikistan"
+msgstr "Tacikistan"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Laos"
-msgstr ""
+msgid "Accept"
+msgstr "QЙ™bul Et"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "Qazaxstan"
+msgid "Description"
+msgstr "Д°zah"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Cayman Islands"
-msgstr "Kayman AdalarД±"
+msgid "Error opening %s for writing: %s"
+msgstr "Yazmaq üçün açılan %s'də xəta: %s"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Kuwait"
-msgstr "KГјveyt"
+msgid "Mouse type: %s\n"
+msgstr "Siçan növü: %s\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Sizin kartД±nД±zД±n XFree %s ilЙ™ 3D dЙ™stЙ™yi ola bilЙ™r."
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Korea"
-msgstr "Daha Г‡ox"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Klaviatura quruluşunu seçiniz."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Korea (North)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "MГјqЙ™ddЙ™s Kit vЙ™ Nevis"
+msgid "Expert Area"
+msgstr "UstalarД±n SahЙ™si"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Comoros"
-msgstr "Komor"
+msgid "Choose a monitor"
+msgstr "Monitorunuzu seçin"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Kiribati"
-msgstr "Kiribati"
+msgid "Empty label not allowed"
+msgstr "BoЕџ etiket qЙ™bul edilЙ™ bilmЙ™z"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cambodia"
-msgstr "Kambodiya"
+msgid "Maltese (UK)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "QД±rДџД±zД±stan"
+msgid "I can't add any more partition"
+msgstr "Artıq bölmə əlavə edilə bilməz"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Kenya"
-msgstr "Kenya"
+msgid "Size in MB: "
+msgstr "MB cinsindən böyüklük: "
 
-#: ../../lang.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Japan"
-msgstr "Yaponiya"
+msgid "Remote printer"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Jordan"
-msgstr "Д°ordaniya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose a language to use."
+msgstr "Xahiş edirik istifadə üçün bir dil seçin."
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Jamaica"
-msgstr "Yamayka"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
+"AvadanlД±ДџД±n qurДџularД±nД± dЙ™yiЕџdirmaЙ™k istЙ™mirsiniz isЙ™,\n"
+"OLDU ya basД±n.\n"
+"AЕџaДџД±dakД± giriЕџlЙ™ri dГјzЙ™ltmЙ™niz Г¶zГјnГј Й™vvЙ™lki qurДџularД±n ГјstГјnЙ™ yazacaqdД±r."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Iceland"
-msgstr "Д°slandiya"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"KompГјterinizi avtomatik olaraq bir istifadЙ™Г§i ilЙ™ baЕџlada bilЙ™rЙ™m.\n"
+"Д°stЙ™mirsiniz isЙ™ rЙ™dd edin."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Iran"
-msgstr "Д°raq"
+msgid "Floppy format"
+msgstr "ЕћЙ™killЙ™ndir"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Iraq"
-msgstr "Д°raq"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Britaniya Hind OkeanД± SahЙ™si"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Г‡ap Edici"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "India"
-msgstr "Hindistan"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Israel"
-msgstr "Д°srail"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Ireland"
-msgstr "Д°zlandiya dili"
+msgid "First sector of the root partition"
+msgstr "Açılış qisminin ilk sektoru"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Indonesia"
-msgstr "Д°ndoneziya"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hungary"
-msgstr "MacarД±stan"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Haiti"
-msgstr "Haiti"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Croatia"
-msgstr "XД±rvatД±stan"
+msgid "Cape Verde"
+msgstr "Keyp Verde"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Honduras"
-msgstr "Honduras"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Hird AdasД± vЙ™ Mkdonald AdalarД±"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Hong Kong"
-msgstr "Honq Konq"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "China"
-msgstr "Г‡in"
+msgid "Guam"
+msgstr "Quam"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "Quyana"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "Qvineya Bissau"
+msgid "/Options/Test"
+msgstr "/Seçənəklər/Sınaq"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Guam"
-msgstr "Quam"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
+"asand\n"
+"iЕџlЙ™dilЙ™cЙ™k, ancaq xЙ™talara qarЕџД± da hЙ™ssaiyyЙ™ti dЙ™ artacaqdД±r. Д°nternetЙ™ \n"
+"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Mounting partition %s"
+msgstr "Şəkilləndirilən bölmə: %s"
+
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Guatemala"
-msgstr "Quatemala"
+msgid "User name"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Cinubi Georgiya və Cənubi Sandviç Adası"
+msgid "New configuration (isdn-light)"
+msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Equatorial Guinea"
-msgstr "Ekvatorial Qvineya"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Г‡ap Edici"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Guadeloupe"
-msgstr "Quadelup"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Linuks4Win'i qurmaq üçün hansı disk bölməsini istifadə edəcəksiniz?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Guinea"
-msgstr "Qvineya"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Fayl sistemi qurДџularД±"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Gambia"
-msgstr "Qambiya"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "QapД±larД± sД±na"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Greenland"
-msgstr "Qrinland"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Gibraltar"
-msgstr "Gibraltar"
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "Rezolyusiya: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Soket Г‡ap Edici QurДџularД±"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Ghana"
-msgstr "Qana"
+msgid "Card mem (DMA)"
+msgstr "Kart mem (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "France"
+msgstr "FransД±zca"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "French Guiana"
-msgstr "FransД±z GvineyasД±"
+msgid "browse"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Georgia"
-msgstr "GГјrcГјstan"
+msgid "Checking installed software..."
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "UzaqdakД± ev sahibi adД±"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Г‡ap edicini sД±namaq istЙ™yirsiniz?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Grenada"
-msgstr "Qrenada"
+msgid "Turkey"
+msgstr "TГјrkiyЙ™"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "United Kingdom"
-msgstr "BirlЙ™ЕџmiЕџ KrallД±q"
+msgid "Alcatel speedtouch usb"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 dГјymЙ™li"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Gabon"
-msgstr "Qabon"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vyetnam dili \"numeric row\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Siçan"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Faro AdalarД±"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Micronesia"
-msgstr "Mikroneziya"
+msgid "Hardware"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Fokland AdalarД± (Malvin)"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Fiji"
-msgstr "Fici"
+msgid "United States"
+msgstr "BirlЙ™ЕџmiЕџ Ећtatlar"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Finland"
-msgstr "Finlandiya"
+msgid "Default OS?"
+msgstr "ЖЏsas OS"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Efiopiya"
+msgid "Swiss (German layout)"
+msgstr "İsveçcə (Alman sırası)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Spain"
-msgstr "Д°spaniya"
+msgid "Configure all heads independently"
+msgstr "BГјtГјn baЕџlД±qlarД± ayrД± ayrД± quraЕџdД±r"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Eritrea"
-msgstr "Eritre"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NTP Server"
+msgstr "NIS Verici"
+
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "DisketЙ™ qeyd et"
+
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Western Sahara"
-msgstr "QЙ™rbi Saxara"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Egypt"
-msgstr "Misir"
+msgid "nice"
+msgstr "gözəl"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Leaving in %d seconds"
+msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
+
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Estonia"
-msgstr "Estoniya"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Country"
+msgstr "Г–lkЙ™:"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "QapД±"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Ecuador"
-msgstr "Ekvador"
+msgid "Ghostscript"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Algeria"
-msgstr "ЖЏlcЙ™zair"
+msgid "LAN Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr "Dominikan RespublikasД±"
+msgid "Ghana"
+msgstr "Qana"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dominica"
-msgstr "Dominik"
+msgid "Path or Module required"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Denmark"
-msgstr "Danimarka"
+msgid "Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"Bu nöqtədə siz Linuks Mandrake yükləmək üçün bölmələri seçməlisiniz. Əgər "
+"əvvəldən bölmələr var isə (sistemdə əvvəllər qurulu olan GNU/Linuks "
+"bölmələri və ya başqa bölmələndirmə vasitələri ilə hazırladığınız bölmələr), "
+"onları seçin və istifadə edin.\n"
+"Yoxsa onlarД± bildirmЙ™lisiniz.\n"
+"\n"
+"\n"
+"Bölmələri yaratmaq üçün əvvəlci diski seçməlisiniz.\n"
+"Diski seçmək üçün birinci IDE sürücüsü üçün \"hda\" nı, ikinciyi seçmək üçün "
+"\"hdb\"ni, birinci SCSİ sürücüsü üçün ise \"sda\" vs tıqlamalısınız.\n"
+"\n"
+"\n"
+"Seçdiyiniz sürücüyə aşağıdakıları etməyə qadirsiniz:\n"
+"\n"
+"  *Hamısını təmizlə: seçili sürücüdə bütün bölmələri silər.\n"
+"\n"
+"\n"
+"  *Avtomatik: Sürücünüzdəki boş sahədə Ext2 və Swapbölmələrini avtomatik\n"
+"yaradar.\n"
+"\n"
+"\n"
+"  *Bölmə cədvəlini qurtar: Zədələnmiş bölmə cədvəlinibərpa edər.  Xahiş "
+"edirik\n"
+" diqqətli olun, çünkü bu da iflas edə bilər.\n"
+"\n"
+"\n"
+"  *Gəri dön: İstəmədiyiniz seçkilərinizdən geri döndərər.\n"
+"\n"
+"\n"
+"  *Yenidən yüklə: Bütün dəyişikliklərinizdən geri dönərbaşdakı bölmə "
+"cЙ™dvЙ™linЙ™ gЙ™lЙ™r.\n"
+"\n"
+"\n"
+"  *Sehirbaz: Bölmələndirməyi bir sehirbaz edər. Təcrübəsizisəniz bunu "
+"seçin.\n"
+"\n"
+"\n"
+" *Floppy-dən bərpa et: Bölmə cədvəlini əvvəllər flopy-yə qeydetdiniz isə, "
+"bölmə cədvəlini bərpa edin.\n"
+"\n"
+"\n"
+"  *Floppy-yə qeyd et: Daha sonradan bərpa etmek üçünbilgiləri floppy-yə qeyd "
+"edin.\n"
+"  Bu seçki şiddətlə tövsiyə edilir.\n"
+"\n"
+"\n"
+"  *Oldu: Bölmələndirmə bitdiyində, bunu seçərəkdəyişikliklərinizi qeyd "
+"edin.\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, istənilən seçkiyə Tab ve Aşağı/Yuxarı oxlarını da işlədərək "
+"klaviaturadan idarЙ™ edЙ™ bilЙ™rsiniz.\n"
+"\n"
+"\n"
+"Bölmə seçildiyi zaman bunları işlədə bilərsiniz:\n"
+"\n"
+"      *Ctrl-c yeni bölmə yaratmaq üçün (boş bölmə seçili olduğu zaman)\n"
+"\n"
+"      *Ctrl-d bölməni ləğv etmək üçün\n"
+"\n"
+"      *Ctrl-m bağlama nöqtəsini göstərmək üçün\n"
+"\n"
+"\n"
+"\n"
+"ЖЏgЙ™r PPC kompГјterdЙ™ qurulum aparД±rsД±nД±zsa, Й™n az 1 MBlД±q balaca bir HFC "
+"'bootstrap' bölməsini yaboot açılış yükləyicisi üçün seçmək istəyəcəksiniz.\n"
+"ЖЏgЙ™r daha Г§ox yeriniz varsa ; mЙ™sЙ™lЙ™n 50 MB, onda bГјtГјn kernel vЙ™ ramdisk "
+"əksini təcili açılış halları üçün saxlaya bilərsiniz."
+
+#: ../../help.pm:1
 #, c-format
-msgid "Djibouti"
-msgstr "Cibuti"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr "Kipr (Yunan vЙ™ TГјrk) "
+msgid "There was an error installing packages:"
+msgstr "PaketlЙ™r qurulurkЙ™n bir xЙ™ta oldu:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "Д°nternet qurДџularД±"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Christmas Island"
-msgstr "Kristmas AdasД±"
+msgid "Undo"
+msgstr "Geri al"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "Bölmə cədvəlini yaz"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cape Verde"
-msgstr "Keyp Verde"
+msgid "Finnish"
+msgstr "FincЙ™"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cuba"
-msgstr "Kuba"
+msgid "Macedonia"
+msgstr "Makedoniya"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Colombia"
-msgstr "Kolumbiya"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cameroon"
-msgstr "Kamerun"
+msgid "Slovenian"
+msgstr "SlovencЙ™"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Libya"
+msgstr "Liberiya"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Chile"
-msgstr "Г‡ili"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "SkriptlЙ™ qurulur, proqram tЙ™'minatД± qurulur, xidmЙ™tlЙ™r baЕџladД±lД±r..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Kuku AdalarД±"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "Kot Divuar"
+msgid "Table"
+msgstr "CЙ™dvЙ™l"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr "İsveçrə"
+msgid "I don't know how to format %s in type %s"
+msgstr "%s'i necə şəkilləndirəcəyimi bilmirəm (Növ: %s)"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Siçan"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Central African Republic"
-msgstr "MЙ™rkЙ™zi Afrika RespublikasД±"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS Verici"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Kokos AdasД±"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Siçan"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Canada"
-msgstr "Kanada"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Belize"
-msgstr "Beliz"
+msgid "Tuvalu"
+msgstr "Tuvalu"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Belarus"
-msgstr "Belarusiya"
+msgid "Use auto detection"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Botswana"
-msgstr "Botsvana"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
+"edЙ™r.\n"
+"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
+"Konsolda pop-up menyu dЙ™stЙ™yi verЙ™r."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bouvet Island"
-msgstr "Buvet AdasД±"
+msgid "Started on boot"
+msgstr "Açılışda başladılır"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Bhutan"
-msgstr "Butan"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Bahamas"
-msgstr "Bahama"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Brazil"
-msgstr "Braziliya"
+msgid "Automatically find available printers on remote machines"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bolivia"
-msgstr "Boliviya"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr "Bruney DarГјssЙ™lim"
+msgid "East Timor"
+msgstr "ЕћЙ™rqi Timor"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bermuda"
-msgstr "Bermuda"
+msgid "Del profile..."
+msgstr "Profili sil..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Benin"
-msgstr "Benin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Burundi"
-msgstr "Burundi"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "%s paketi qurulur"
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Bahrain"
-msgstr "Bahreyn"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "LГјtfen Г§Д±xД±n vЙ™ Ctrl-Alt-BackSpace dГјymЙ™lЙ™rinЙ™ basД±n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bulgaria"
-msgstr "BolqarД±stan"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "%s tapД±ldД±"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Burkina Faso"
-msgstr "Burkina Faso"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr ""
+"Bu paket yenilЙ™nmЙ™lidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr "BanqladeЕџ"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "Paket Qrup Seçkisi"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Barbados"
-msgstr "Barbados"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Bosniya vЙ™ Herzoqovina"
+msgid "SECURITY WARNING!"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "Д°Еџ Yeri"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "AzЙ™rbaycan"
+msgid "No, I don't want autologin"
+msgstr "Xeyr, Avtomatik giriЕџ istЙ™mirЙ™m"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Aruba"
-msgstr "Aruba"
+msgid "Windows Migration tool"
+msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Australia"
-msgstr "serial"
+msgid "All languages"
+msgstr "İşlətdiyiniz dili seçin"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "Rezolyusiya: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "American Samoa"
-msgstr "Amerikan Samoa"
+msgid "Testing your connection..."
+msgstr "BaДџlantД±nД±z sД±nanД±r..."
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "parça böyüklüyü"
+
+#: ../../security/level.pm:1
 #, c-format
-msgid "Argentina"
-msgstr "Argentina"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Parollar fЙ™allaЕџdД±rД±ldД±, yenЙ™ dЙ™ bir ЕџЙ™bЙ™kЙ™ ГјstГјndЙ™ istifadЙ™ edilmЙ™mЙ™si "
+"tövsiyə edilir."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Antarktika"
+msgid "Start sector: "
+msgstr "BaЕџlanДџД±Г§ sektoru: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Angola"
-msgstr "Anqola"
+msgid "Congo (Brazzaville)"
+msgstr ""
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Bu paket yenilЙ™nmЙ™lidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "Holland AntillЙ™ri"
+msgid "Seychelles"
+msgstr "SeyЕџel"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "ErmЙ™nistan"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Parolsuz"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Albania"
-msgstr "Albaniya"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Anguilla"
-msgstr "Anquilla"
+msgid "Zambia"
+msgstr "Zambiya"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "Antiq vЙ™ Barbuda"
+msgid "Security Administrator (login or email)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "BirlЙ™ЕџmiЕџ ЖЏrЙ™b ЖЏmirliklЙ™ri"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Andorra"
-msgstr "Andorra"
+msgid "Under Devel ... please wait."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Afghanistan"
-msgstr "ЖЏfqanД±stan"
+msgid "Czech Republic"
+msgstr "Г‡ex RespublikasД±"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "Egypt"
+msgstr "Misir"
 
-#: ../../loopback.pm:1
-#, c-format
-msgid "Circular mounts %s\n"
-msgstr "DairЙ™vi baДџlama %s\n"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Old configuration (isdn4net)"
+msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
 
-#: ../../lvm.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "MЙ™ntiqi ciltlЙ™ri birinci olaraq sil\n"
+msgid "Sound card"
+msgstr "SЙ™s kartД±"
 
-#: ../../modules.pm:1
-#, c-format
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Bölmə şəkilləndirilməsi"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
 msgstr ""
+"Tək bir böyük disk bölməniz var\n"
+"(Й™sasЙ™n MS DOS/Windows istifadЙ™ edЙ™r).\n"
+"Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
+"tövsiyə edirik. Əvvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
+"DЙ™yiЕџdir\" dГјymЙ™sinЙ™ tД±qlayД±n"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "TЖЏKЖЏRД° OYNADIN!"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "To activate the mouse,"
-msgstr "Siçanınızı işə salmaq üçün,"
+msgid "Change partition type"
+msgstr "Bölmə növünü Dəyişdir"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Xahiş edirik siçanınızı seçin"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Siçansızs"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "Modul seçənəkləri:"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "none"
-msgstr "heç biri"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 dГјymЙ™li"
+msgid "Statistics"
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 dГјymЙ™li"
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(modul %s)"
 
 #: ../../mouse.pm:1
 #, c-format
-msgid "1 button"
-msgstr "1 dГјymЙ™"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "average"
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Г‡ap Edicisiz"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Equatorial Guinea"
+msgstr "Ekvatorial Qvineya"
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwertz)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "yenidЙ™n quraЕџdД±r"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"routed vasitЙ™si avtomatik IP router cЙ™dvЙ™linin RIP protokolu tЙ™rЙ™findЙ™n\n"
+"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
+"daha böyük\n"
+"ЕџЙ™bЙ™kЙ™lЙ™rdЙ™ daha qarД±ЕџД±q routing protokollarД±na ehtiyacД± vardД±r."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Kiribati"
+msgstr "Kiribati"
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Browse"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Sıravi 3 Düyməli Siçan"
+msgid "CDROM"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Sıravi 2 Düyməli Siçan"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Д°nternete giriЕџi indi sД±namaq istЙ™yirsiniz?"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "serial"
-msgstr "serial"
+msgid "Belgian"
+msgstr "Belçika dili"
 
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you have an ISA sound card?"
+msgstr "BaЕџqa var?"
 
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Г‡Й™rx"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
+"Bu baДџlantД± ЕџЙ™klini qura bilmЙ™rЙ™m."
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Generic"
-msgstr "Гњmumi"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "NIS sahЙ™si"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "Artıq bölmə əlavə edilə bilməz"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Ev sahibi adД±"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "/File/Save _As"
+msgstr "/Fayl/_FЙ™rqli Qeyd Et"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Sıravi PS2 Çərxli Siçan"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Standart"
+msgid "Delay before booting default image"
+msgstr "Açılışda gecikmə müddəti"
 
-#: ../../mouse.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Siçan"
+msgid "Restrict command line options"
+msgstr "Əmr sətiri seçənəklərini məhdudlaşdır"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "Avropa"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Otaq vЙ™ grup sД±ralamasД± arasД±nda gЙ™z"
+msgid "Use free space"
+msgstr "BoЕџ sahЙ™ni istifadЙ™ et"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "AДџacД± Qapat"
+msgid "use dhcp"
+msgstr "dhcp istifadЙ™ et"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Ağacı Aç"
+msgid "Mail alert"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Info"
-msgstr "MЙ™'lumat"
+msgid "Internet configuration"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "DoДџrudur?"
+msgid "Uzbekistan"
+msgstr "Г–zbЙ™kistan"
 
-#: ../../my_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "%s tapД±ldД±"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr ""
+msgid "Finish"
+msgstr "Qurtar"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "%s faylД±na yazarkЙ™n xЙ™ta oldu"
+msgid "Show automatically selected packages"
+msgstr "Avtomatik seçili paketləri göstər"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Bad backup file"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "%s faylД±ndan qurtarД±lД±Еџda xЙ™ta: %s"
+msgid "Togo"
+msgstr "Toqo"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Something went wrong! - Is mkisofs installed?"
 msgstr ""
-"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
-"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
-"daЕџД±yaraq\n"
-"mЙ™sЙ™lЙ™ni hЙ™ll edЙ™ bilЙ™rsiniz."
 
-#: ../../partition_table.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../partition_table.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "baДџlama iflas etdi: "
+msgid "Please try again"
+msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
 
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "bЙ™lkЙ™"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "DoДџrudur?"
 
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "nice"
-msgstr "gözəl"
+msgid "FAT resizing failed: %s"
+msgstr "FAT böyüklüyü dəyişdirilməsi bacarılmadı: %s"
 
-#: ../../pkgs.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "very nice"
-msgstr "Й™la"
+msgid "Individual package selection"
+msgstr "Fərdi paket seçkisi"
 
-#: ../../pkgs.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "important"
-msgstr "vacib"
+msgid "This partition is not resizeable"
+msgstr "Hansı bölmə növünü istəyirsiniz?"
 
-#: ../../pkgs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "must have"
-msgstr "alД±nmalД±"
+msgid "Location"
+msgstr "Yeri"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
+msgid "USA (cable-hrc)"
+msgstr ""
 
-#: ../../raid.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "baДџlama iflas etdi"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid iflas etdi"
+msgid "Guatemala"
+msgstr "Quatemala"
 
-#: ../../raid.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "oxЕџayД±r"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid iflas etdi (raidtools Й™ksik ola bilЙ™r mi?)"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "DOS sГјrГјcГј hЙ™rfi: %s (sadЙ™cЙ™ tЙ™xmini)\n"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Şəkilləndirilmiş RAID md%d-yə disk bölməsi əlavə edilə bilinmədi"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Sektor"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bahrain"
+msgstr "Bahreyn"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Hal:"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "omit scsi modules"
+msgstr "scsi modulları keç"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "On boot"
-msgstr "Açılışda"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
 msgstr ""
-"Bu xidmЙ™t haqqД±nda tЙ™Й™sГјf ki,\n"
-"Й™lavЙ™ mЙ™'lumat yoxdur."
+"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
+"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
+"et'Й™ basД±n.\n"
 
-#: ../../services.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "XidmЙ™tlЙ™r vЙ™ vasitЙ™lЙ™r"
+msgid "Keyboard layout: %s\n"
+msgstr "Klavatura dГјzГјlГјЕџГј: %s\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "stopped"
-msgstr "dayandД±rД±lД±b"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "running"
-msgstr "iЕџlЙ™mir"
+msgid "Maltese (US)"
+msgstr ""
 
 #: ../../services.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"BГјtГјn ЕћЙ™bЙ™kЙ™ Fayl SistemlЙ™rini (NFS), SMB (Lan Manager/Windows), vЙ™ \n"
+"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Database Server"
-msgstr "Databeyz"
+msgid "Tvcard"
+msgstr "TV kartД±"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
+msgid "Toggle between normal/expert mode"
+msgstr "Normal moda keç"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "File sharing"
-msgstr ""
+msgid "Size"
+msgstr "Böyüklük"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Internet"
-msgstr "Д°nternet"
+msgid "GRUB"
+msgstr ""
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "Г‡ap Edici"
+#: ../../lang.pm:1
+#, c-format
+msgid "Greenland"
+msgstr "Qrinland"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr ""
-"X Font Vericisini açılışda işə salar (Bu, XFree icrası üçün məcburidir)."
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"Syslog, bir Г§ox vasitЙ™nin ismarД±clarД±nД± mГјxtЙ™lif sistem qeydlЙ™rindЙ™\n"
-"tutmalarД±na imkan verЙ™r. Syslog'un hЙ™r zaman iЕџlЙ™mЙ™si\n"
-"yaxЕџД± fikirdir."
+"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
+"VЙ™ artД±q fЙ™allaЕџdД±rД±lmД±ЕџdД±r.\n"
+"\n"
+"NЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr "KompГјterinizdЙ™ sЙ™s sistemД± baЕџladД±n"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Fayl seç"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
 msgstr ""
-"rwho protokolu, uzaq istifadЙ™Г§ilЙ™rin, rwho vasitЙ™si iЕџlЙ™dЙ™n bir kompГјterdЙ™\n"
-"olan bütün istifadəçiləri görmələrina imkan verər."
 
-#: ../../services.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
 msgstr ""
-"rusers protokolu bir ЕџЙ™bЙ™kЙ™dЙ™kД± istifadЙ™Г§ilЙ™rin o ЕџЙ™bЙ™kЙ™dЙ™kД± kompГјterlЙ™rdЙ™\n"
-"işləyən istifadəçiləri görməsinə imkan verər."
 
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
-"rstat protokolu bir ЕџЙ™bЙ™kЙ™dЙ™kД± istifadЙ™Г§ilЙ™rin o ЕџЙ™bЙ™kЙ™dЙ™kД± hЙ™r hansД± bir\n"
-"kompüter haqqındakı qabiliyyət ölçüləri ala bilmələrinə imkan verər."
+msgid "Which configuration of XFree do you want to have?"
+msgstr "NecЙ™ bir XFree qurДџusunu istЙ™yirsiniz?"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"routed vasitЙ™si avtomatik IP router cЙ™dvЙ™linin RIP protokolu tЙ™rЙ™findЙ™n\n"
-"yenilənməsinə imkan verər. RIP əsasən kiçik şəbəkələrdə istifadə edilir, "
-"daha böyük\n"
-"ЕџЙ™bЙ™kЙ™lЙ™rdЙ™ daha qarД±ЕџД±q routing protokollarД±na ehtiyacД± vardД±r."
+msgid "More"
+msgstr "Daha Г‡ox"
 
-#: ../../services.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
 msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
 msgstr ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle"
+"Bu tЙ™hlГјkЙ™sizlik sЙ™viyyЙ™siylЙ™ sistemin bir verici olaraq istifadЙ™si "
+"mГјmkГјndГјr.  \n"
+"TЙ™hlГјkЙ™sizlik, birdЙ™n Г§ox alД±cД±nД±n baДџlanmasД±na icazЙ™ verЙ™cЙ™k ЕџЙ™kildЙ™ "
+"artД±rД±lmД±ЕџdД±r. "
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "Hesap Parolu"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
 msgstr ""
-"YГјksЙ™k keyfiyyЙ™t tЙ™sadГјfi rЙ™qЙ™m istehsal edЙ™n sistem entropi hovuzunun \n"
-"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "Thai klaviatura"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
-"Posfix, elektronik mЙ™ktublarД±n bir kompГјterdЙ™n digЙ™rinЙ™ yollayan \n"
-"Elektronik MЙ™ktub Yollama VasitЙ™sidir."
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Bağlama nöqtəsi"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 msgstr ""
-"portmapper, NFS ve NIS kimi protokollar tЙ™rЙ™findЙ™n istifadЙ™ edilЙ™n RPC \n"
-"baДџlantД±larД±nД± tЙ™ЕџkilatlandД±rД±r. Portmap vericisi RPC mexanizmini iЕџlЙ™dЙ™n\n"
-"protokollarla xidmЙ™t edЙ™n kompГјterlЙ™rdЙ™ qurulmalД±dД±r vЙ™ iЕџlЙ™dilmЙ™lidir."
+"Siz Open Fİrmware açılış avadanlığınızı açılış yükləyicisini\n"
+"fəallaşdırmaq üçün dəyişdirməli ola bilərsiniz. Əmr-Seçənək-O-F düymələrini\n"
+" yenidЙ™n baЕџlarkЙ™n basД±n vЙ™ bunlarД± girin:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Sonra da bunlarД± yazД±n: shut-down\n"
+"Bir sonrakı başlanğıcda açılış yükləyicisi sətirini görməlisiniz."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
 msgstr ""
-"PCMCIA dЙ™stЙ™yi, laptoplarda eternet vЙ™ modem kimi avadanlД±qlarД±n "
-"dЙ™stЙ™klЙ™nmЙ™sinЙ™ imkan verЙ™r.\n"
-"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
-"kompГјterlЙ™rdЙ™ qurulu olmasД± problem yaratmaz."
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "OKI 4w vЙ™ uyДџun Windows Г§ap edicilЙ™rini dЙ™stЙ™klЙ™."
+msgid "Select file"
+msgstr "Fayl seç"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"Choose the network or host on which the local printers should be made "
+"available:"
 msgstr ""
-"Açılışda XFree və konsolda numlock düyməsini\n"
-"avtomatik olaraq aç."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
-"protokoldur. Bu xidmЙ™t NFS fayl qД±fД±lД± istifadЙ™sinЙ™ imkan verЙ™r."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
-"protokoldur.\n"
-"Bu xidmЙ™t, /etc/exports faylД±nda qurДџularД± olan NFS vericisinin\n"
-"istifadЙ™sinЙ™ imkan verЙ™r."
+msgid "Japan"
+msgstr "Yaponiya"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Çap edici seçənəkləri"
+
+#: ../../standalone/localedrake:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "The change is done, but to be effective you must logout"
 msgstr ""
-"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
-"fЙ™allaЕџdД±rД±r ya da qapatД±r."
 
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS verici"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "NCP queue name missing!"
 msgstr ""
-"BГјtГјn ЕћЙ™bЙ™kЙ™ Fayl SistemlЙ™rini (NFS), SMB (Lan Manager/Windows), vЙ™ \n"
-"NCP (NetWare) bağlama nöqtələrini bağlar və ayırır."
 
-#: ../../services.pm:1
-#, fuzzy, c-format
+#: ../../standalone/net_monitor:1
+#, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
 msgstr ""
-"named (BIND) verici adlarД±nД± IP ГјnvanlarД±na Г§evirЙ™n\n"
-"SahЙ™ AdД± Vericisidir(DNS)."
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "\"%s\" adlД± Cd-Rom"
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
-"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
+"YГјksЙ™k keyfiyyЙ™t tЙ™sadГјfi rЙ™qЙ™m istehsal edЙ™n sistem entropi hovuzunun \n"
+"saxlanması və yenidən köhnə halına gətirilməsinə imkan verər."
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
 msgstr ""
-"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
-"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
-"vericidir."
 
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Turn your computer into a reliable server"
 msgstr ""
-"Linuxconf sistem qurДџularД±nД±zД± idarЙ™ edЙ™n proqramlarД±\n"
-"müxtəlif vəzifələri açılışda icra edər."
 
-#: ../../services.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Texniki avadanlığın açılışda avtomatik təsbiti və qurulması."
+msgid " (driver %s)"
+msgstr " (sГјrГјcГј %s)"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"Loopback file(s):\n"
+"   %s\n"
 msgstr ""
-"/usr/include/linux/{autoconf,version}.h üçün \n"
-"/boot-da avtomatik Г§Й™kirdЙ™k baЕџlД±ДџД± yaradД±lmasД±."
+"Loopback faylД±:\n"
+"   %s\n"
 
-#: ../../services.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
-"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
-"Bu, mandrake qurulan bir Г§ox kompГјterdЙ™ fЙ™al buraxД±lmalД±dД±r."
+msgid "I don't know"
+msgstr "BilmirЙ™m"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid ", TCP/IP host \"%s\", port %s"
 msgstr ""
-"Linuks 2.2 seriyasД± Г§Й™kirdЙ™klЙ™rindЙ™ firewall\n"
-"qurmaq üçün üçün paket süzülməsini başlat."
 
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"Internet superserver daemon (qД±saca inetd ) bir Г§ox \n"
-"baЕџqa internet xidmЙ™tcisini lazД±m gЙ™ldiyi zaman iЕџa salД±r. Д°Г§indЙ™ telnet, "
-"ftp, rsh vЙ™ rlogin kimi proqramД±n olduДџu xidmЙ™tlЙ™ri iЕџЙ™ salmaqla mЙ™s'uldur.\n"
-"inetd-ni sistemden Г§Д±xarmaq, onun mЙ™s'ul olduДџu bГјtГјn xidmЙ™tlЙ™ri\n"
-"rЙ™dd etmЙ™k mЙ™nasД±nД± daЕџД±yД±r."
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
 msgstr ""
-"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
-"istifadЙ™ edilir."
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Qurulumdan Г§Д±x"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid " ("
 msgstr ""
-"HardDrake texniki tЙ™'minat sД±naДџД± aparar vЙ™ onlarД± bir Г¶n quraЕџdД±rmadan "
-"keçirər."
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "AzЙ™rbaycanca (kiril)"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM, Midnight Commander kimi mətn əsaslı tə'minatlara siçan dəstəyi əlavə "
-"edЙ™r.\n"
-"Ayrıca konsolda siçanla kəsmə və yapışdırma əməliyyatlarına da imkan verər.\n"
-"Konsolda pop-up menyu dЙ™stЙ™yi verЙ™r."
+msgid "Add a module"
+msgstr "Modul Й™lavЙ™ et"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron, istifadЙ™Г§ilЙ™rЙ™ xГјsusi Й™mrlЙ™ri periodik olaraq iЕџЙ™ sala bilЙ™n\n"
-"standart bir UNIX proqramД±dД±r. vixie cron, standart cron'a Й™lavЙ™ edilmiЕџ bir "
-"Г§ox\n"
-"yeni xГјsusiyyЙ™t daxildir."
+msgid "Profile to delete:"
+msgstr "SilinЙ™cЙ™k profil:"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "Yerli Г‡ap Edici"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "busmouse"
+msgstr "busmouse"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Login (user name)"
+msgstr "Hesab GiriЕџi (istifadЙ™Г§i adД±)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Fdiv bug"
 msgstr ""
-"at Й™mri, zamanlanan Й™mrlЙ™ri iЕџlЙ™mЙ™lЙ™ri lazД±m gЙ™lЙ™n vaxtda iЕџlЙ™dir.\n"
-"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
 
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
 msgstr ""
-"apmd batareya vəziyyətini izləmək üçün və syslog aracılığıyla bunun qeydini "
-"tutmaq üçün istifadə edilir.\n"
-"Ayrıca batareya azaldığında sistemi qapatmaq üçün də istifadə edilir."
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anakron, periodik Й™mr zamanlayД±cД±sД±"
+msgid "Benin"
+msgstr "Benin"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "ALSA sЙ™s sistemini (Advanced Linux Sound Architecture) baЕџlat"
+msgid "Uruguay"
+msgstr "Uruqvay"
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "%s paketi qurulur"
+msgid "Path selection"
+msgstr "Paket seçkilərini saxla"
 
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
+msgid "Monitor: %s\n"
+msgstr "Monitor: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
 msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
 msgstr ""
+"BЙ™'zЙ™n sГјrГјcГјnГјzdЙ™ pis ЕџeylЙ™r ola bilЙ™r.\n"
+"Datanın bütövlüyü yoxlaması bacarılmadı. \n"
+"Bu o demekdir ki diskЙ™ yazД±lan hЙ™r Еџey tЙ™sadГјfi olacaqdД±r"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Г‡ap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Bangladesh"
+msgstr "BanqladeЕџ"
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
 "\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "Д°nit Д°smarД±cД±"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "Davam et"
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Klaviatura"
+msgid "Custom Restore"
+msgstr "XГјsusi"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "Skript Й™saslД±"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "%s faylД± oxunurkan xЙ™ta oldu"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "ЕћЙ™killЙ™ndirilir"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Bir swap sahЙ™sinЙ™ ehtiyacД±nД±z var"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
 msgstr ""
 
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "DigЙ™r sistemlЙ™r (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Qurulum/GГјncЙ™llЙ™mЙ™"
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "%d paket"
+
 #: ../../standalone.pm:1
 #, c-format
 msgid ""
@@ -6734,3946 +6093,4265 @@ msgid ""
 "--version             : show version number.\n"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "TanД±tma"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Exit install"
-msgstr "Qurulumdan Г§Д±x"
+msgid "Costa Rica"
+msgstr "Kosta Rika"
 
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Install updates"
-msgstr "Sistemi qur"
+msgid "Use libsafe for servers"
+msgstr "X verici üçün seçənəkləri göstərin"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "XidmЙ™tlЙ™ri qur"
+msgid "Icelandic"
+msgstr "Д°zlandiya dili"
 
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "X qur"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Sistem yГјklЙ™yicini qur"
+msgid "Please relog into %s to activate the changes"
+msgstr "\"%s\"a(Й™) tЙ™krar girin vЙ™ dЙ™yiЕџikliklЙ™ri fЙ™allaЕџdД±rД±n"
 
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "Configure networking"
-msgstr "ЕћЙ™bЙ™kЙ™ni qur"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Add a user"
-msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
+msgid "Lilo/grub mode"
+msgstr "Lilo/grub modu"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Root password"
-msgstr "Root parolunu qur"
+msgid "Output"
+msgstr "NЙ™ticЙ™"
 
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Sistemi qur"
+msgid "Circular mounts %s\n"
+msgstr "DairЙ™vi baДџlama %s\n"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Qurulacaq paketləri seçin"
+msgid "Martinique"
+msgstr "Martiniq"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Format partitions"
-msgstr "Bölmə şəkilləndirilməsi"
+msgid "HardDrive / NFS"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../modules/parameters.pm:1
 #, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Г‡ap Edici"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Klaviaturanızı seçin"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "Quruluş sinifini seçin"
+msgid "a number"
+msgstr "Telefon nömrəsi"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Sabit disk seçkisi"
+msgid "Swedish"
+msgstr "İsveçcə"
 
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Siçan qurğuları"
+msgid "Which %s driver should I try?"
+msgstr "HansД± %s sГјrГјcГјsГј sД±nansД±n?"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "License"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Language"
-msgstr "İşlətdiyiniz dili seçin"
+msgid "Filesystem types:"
+msgstr "Fayl sistemi növü:"
 
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "utopia 25"
+msgid ", multi-function device on HP JetDirect"
 msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "OK"
-msgstr "Oldu"
+msgid "Northern Mariana Islands"
+msgstr "Ећimali Marian AdalarД±"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "heç biri"
 
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
 msgstr ""
-"Sizin kartД±nД±zД±n XFree %s ilЙ™ 3D dЙ™stЙ™yi ola bilЙ™r.\n"
-"DД°QQЖЏT! BU SINAQ MЖЏRHЖЏLЖЏSINDЖЏDIR VЖЏ KOMPГњTERД°NД°Z DONDURA BILЖЏR."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "SINAQ MЖЏRHЖЏLЖЏSД°NDЖЏKД° 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™kli XFree %s"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Sizin kartД±nД±zД±n XFree %s ilЙ™ 3D dЙ™stЙ™yi ola bilЙ™r."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "3D avadanlД±q sГјr'Й™tlЙ™ndirmЙ™si ilЙ™ XFree %s"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "DisketЙ™ qeyd et"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Sizin kartД±nД±zД±n 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™yi ola bilЙ™r, amma sadecЙ™ olaraq "
-"XFree %s\n"
-"ilЙ™ dГјzgГјn iЕџlЙ™yЙ™r.\n"
-"DД°QQЖЏT! BU SINAQ MЖЏRHЖЏLЖЏSINDЖЏDIR VЖЏ KOMPГњTERД°NД°Z DONDURA BILЖЏR.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir seçki olar."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Ghostscript referencing"
 msgstr ""
-"Sizin kartД±nД±zД±n 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™yi ola bilЙ™r, amma sadecЙ™ olaraq "
-"XFree %s\n"
-"ilЙ™ dГјzgГјn iЕџlЙ™yЙ™r.\n"
-"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
-"bir fikir olar."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "TЙ™kcЙ™ \"%s\" kartД±nД± qur (%s)"
+msgid "Bootloader"
+msgstr "İstifadə ediləcək Açılış idarəcisi"
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Xinerama ifadЙ™lЙ™rini iЕџlЙ™t"
+msgid "Move"
+msgstr "DaЕџД±"
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "BГјtГјn baЕџlД±qlarД± ayrД± ayrД± quraЕџdД±r"
+msgid "Bootloader to use"
+msgstr "İstifadə ediləcək Açılış idarəcisi"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "NecЙ™ bir XFree qurДџusunu istЙ™yirsiniz?"
+msgid "SMB server host"
+msgstr "SMB verici adД±"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS Verici"
+
+#: ../../install_messages.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "XFree quraЕџdД±rД±lmasД±"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a ЕџЙ™bЙ™kЙ™. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"Sizin sisteminiz Г§oxlu baЕџlД±q quraЕџdД±rmasД±nД± dЙ™stЙ™klЙ™yir.\n"
-"NЙ™ etmЙ™k istЙ™yirsiniz?"
+"Linuks Virtual Verici, yüksək qabiliyyətli vericilər qurmaq üçün işlədilir."
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "Г‡oxlu BaЕџlД±q quraЕџdД±rД±lmasД±"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Bir X vericisi seçin"
+msgid "4 billion colors (32 bits)"
+msgstr "4 milyard rЙ™ng (32 bits)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "X server"
-msgstr "X verici"
+msgid "Micronesia"
+msgstr "Mikroneziya"
 
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 MB vЙ™ ya daha Г§ox"
+msgid "License"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "This may take a moment to generate the keys."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"Bir xəta oldu. Yeni fayl sisteminin yaradılacağı hökmlü bir sürücü "
+"tapılmadı. Bu problemin qaynağı üçün avadanlığınızı yoxlayın"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polyakca (QWERTY sД±rasД±)"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "FЙ™al"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
 "\n"
-"%s"
-msgstr ""
-"Mövcud qurğuları saxlayım?\n"
-"Hal-hazД±rkД± qurДџular:\n"
+"Drakbackup activities via CD:\n"
 "\n"
-"%s"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Options"
-msgstr "Seçənəklər"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Test"
+msgid "Host \"%s\", port %s"
 msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Resolution"
-msgstr "Rezolyusiya"
+msgid "This partition can't be used for loopback"
+msgstr "Bu disk bölməsi loopback üçün işlədilməz"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Monitor"
-msgstr "Monitor"
-
-#: ../../Xconfig/main.pm:1
-#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Ekran kartД±"
+msgid "File already exists. Use it?"
+msgstr "Fayl onsuz da vardД±r. Д°ЕџlЙ™dilsin?"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Ећaquli yenilЙ™mЙ™ sГјr'Й™ti"
+msgid "received: "
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "ГњfГјqi yenilЙ™mЙ™ sГјr'Й™ti"
+msgid "Right Alt key"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+msgid "the list of alternative drivers for this sound card"
 msgstr ""
-"Buradaki iki vacib parametr ГјfГјqi ve Еџaquli yenilЙ™mЙ™ sГјr'Й™tlЙ™ridir.\n"
-"Seçərkən monitorunuzun qabiliyyətinin üstündə bir parametr\n"
-"seçməməyiniz çox vacibdir, əks halda monitor zərər görər.\n"
-"Seçərkən bir qərarsızlığa düşərsəniz, alçaq rezolyusiya seçin."
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
+msgid "Gateway"
+msgstr "Keçit"
 
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Vendor"
-msgstr "Geri al"
+msgid "Scanner sharing"
+msgstr "Г‡ap Edici"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Tonga"
+msgstr "Tonqa"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Monitorunuzu seçin"
+msgid "Tunisia"
+msgstr "Tunis"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Ekran kartД±: %s"
+msgid "Profile: "
+msgstr "Profil: "
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Rezolyusiya və rəng dərinliyini seçin"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Resolutions"
-msgstr "Rezolyusiyalar"
+msgid "XawTV isn't installed!"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 milyard rЙ™ng (32 bits)"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 milyon rЙ™ng (24 bits)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 min rЙ™ng (16 bits)"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 min rЙ™ng (15 bits)"
+msgid "This label is already used"
+msgstr "Bu etiket istifadЙ™ edilmЙ™z"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 rЙ™ng (8 bits)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "DoДџrudur?"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr ""
+"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
+"silinЙ™cЙ™kdir"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
+msgid "Connection Time: "
+msgstr "Bağlantı növü:"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "select perm file to see/edit"
+msgstr ""
+
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
+"Qurma Cd-Romunu sГјrГјcГјnГјzЙ™ taxД±n vЙ™ OLDUya basД±n.\n"
+"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün RƏDD ETə basın."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "DiqqЙ™t: Bu qrafika kartД± ilЙ™ edilЙ™cЙ™k sД±naq tЙ™hlГјkЙ™lidir"
+msgid "Use group id for execution"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
+msgid "Choose the default user:"
+msgstr "Əsas istifadəçini seçin:"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "QurДџularД±n sД±naДџД±"
+msgid "Gabon"
+msgstr "Qabon"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "ISDN bağlantınızın növü nədir?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
 msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
 "\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
+"BuradakД± hЙ™r Г§ap edici avtomatik tapД±lacaqdД±r.\n"
+"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
-"Açılışda X Window ilə başlamaq istəyirsiniz?"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "X ilə Açılış"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 sГјrГјcГј: %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS sahЙ™si"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 verici: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Гњmumi yaddaЕџ miqdarД± (%d MB tapД±ldД±)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Rezolyusiya: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "RЙ™ng dЙ™rinliyi: %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "Dns xidmətcisi 2 (arzuya görə)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Ekran kartД± yaddaЕџД±: %s KB\n"
+msgid "Boot device"
+msgstr "Açılış avadanlığı"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "Ekran kartД±: %s\n"
+msgid "Which partition do you want to resize?"
+msgstr "Hansı bölmənin böyüklüyünü dəyişdirəcəksiniz?"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Monitorun ГњfГјqi YenilЙ™mЙ™si: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr "Birləşmiş Ştatlar yanı Kiçik Adalar"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Monitorun Ећaquli DaramasД±: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "QeydlЙ™rinizЙ™ baxan vasitЙ™"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Monitor: %s\n"
+msgid "Djibouti"
+msgstr "Cibuti"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Siçan avadanlığı: %s\n"
+msgid "detected on port %s"
+msgstr "%s qapД±sД±nda tapД±ldД±"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Siçan növü: %s\n"
+msgid "LPD"
+msgstr ""
 
 #: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Klavatura dГјzГјlГјЕџГј: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "Ekran kartД±: %s\n"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Seçənəklər: %s"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "Bağlama nöqtəsi: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Server: "
-msgstr "Verici"
+msgid "Splash selection"
+msgstr "Paket seçkilərini saxla"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Xahiş edirik siçanınızı seçin"
+msgid "Extended partition not supported on this platform"
+msgstr "Bu platformda genişlədilmiş bölmələr dəstəklənmir"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Mount point"
-msgstr "Bağlama nöqtəsi"
+msgid "ISDN Configuration"
+msgstr "ISDN quraЕџdД±rД±lmasД±"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "YГјksЙ™k"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Server"
-msgstr "Verici"
+msgid "Internet Connection Sharing"
+msgstr "İnternet Bağlantısı Bölüşdürülməsi"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Mount"
-msgstr "BaДџla"
+msgid "Choose file"
+msgstr "Fayl seç"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Unmount"
-msgstr "AyД±r"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"DiqqЙ™t! Var olan Firewall qurДџusu tapД±ldД±. YГјklЙ™mЙ™dЙ™n sonra bir az Й™l "
+"gЙ™zdirЙ™ bilЙ™rsiniz."
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "New"
-msgstr "yeni"
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "YerinЙ™ ``%s'' iЕџlЙ™t"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Г‡ap Edici BaДџlantД±sД±"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Type"
-msgstr "Növ"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Sıravi PS2 Çərxli Siçan"
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "ЖЏvvЙ™lcЙ™ ``AyД±r'-Д± iЕџlЙ™t"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Sil"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Ekran kartınızı seçin"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Yarat"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Növbəni sil"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Fayl sistemi növü:"
+msgid "French Southern Territories"
+msgstr "CЙ™nubi FransД±z SahЙ™lЙ™ri"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Empty"
-msgstr "BoЕџ"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "NIS sahЙ™si"
+msgid "the vendor name of the processor"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "All data on this partition should be backed-up"
+msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Installing package %s"
+msgstr "%s paketi qurulur"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Swap"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "baДџlama iflas etdi"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Yerli Г‡ap Edici"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
+msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
-"Tək bir böyük disk bölməniz var\n"
-"(Й™sasЙ™n MS DOS/Windows istifadЙ™ edЙ™r).\n"
-"Əvvəlcə bu disk bölməsinin böyüklüyünü dəyişdirməyinizi\n"
-"tövsiyə edirik. Əvvəlcə bölmənin üstünə, sonra \"Böyüklüyü\n"
-"DЙ™yiЕџdir\" dГјymЙ™sinЙ™ tД±qlayД±n"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Monitorunuzu seçin"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Sehirbaz"
+msgid "Choose packages to install"
+msgstr "Qurulacaq paketləri seçin"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
 msgstr ""
-"Aboot istifadЙ™ etmЙ™yi istЙ™yirsinizsЙ™, boЕџ disk sahЙ™si (2048 sektor bЙ™sdir.)\n"
-"buraxmayД± unutmayД±n."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "ЖЏvvЙ™lcЙ™ datanД±zД±n yedЙ™yini alД±n"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr ""
+"%s bölüməsinin böyüklüyü dəyişdirildikdən sonra bu bölmədəki bütün "
+"mЙ™'lumatlar silinЙ™cЙ™kdir"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Read carefully!"
-msgstr "DiqqЙ™tlЙ™ Oxuyun!"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Sisteminizdə qurulum ya da güncəlləmə üçün lazımi boş yer yoxdur(%d > %d)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Encryption key"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Parollar uyДџun gЙ™lmir"
+#: ../../lang.pm:1
+#, c-format
+msgid "Bhutan"
+msgstr "Butan"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "Bu parol Г§ox sadЙ™dir (en az %d xarakter boyunda olmalД±dД±r)"
+msgid "Reading printer data..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "Korean keyboard"
+msgstr "Koreya klaviaturasД±"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Fayl sistemi növü: "
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Not connected"
+msgstr "BaДџlД± deyil"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Type: "
-msgstr "Növ: "
+msgid "Greek"
+msgstr "Yunanca"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "%d data yolunda, %d nö'li\n"
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Bölmə cədvəli növü: %s\n"
+msgid "Saint Kitts and Nevis"
+msgstr "MГјqЙ™ddЙ™s Kit vЙ™ Nevis"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disklЙ™ri %s\n"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Info: "
-msgstr "MЙ™'lumat: "
+msgid "Enable OF Boot?"
+msgstr "OF Açılışı Fəallaşdırım?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "GeometriyasД±: %s silindr, %s baЕџ, %s sektor\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "16MB dən kiçik disk bölmələrində JFS istifadə etməlisiniz"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Böyüklük: %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Monitorun ГњfГјqi YenilЙ™mЙ™si: %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Read-only"
+msgid "path"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Device: "
-msgstr "AvadanlД±q: "
+msgid "Mount point"
+msgstr "Bağlama nöqtəsi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"\n"
-"Bu, ikili açılış üçün xüsusi\n"
-"Bootstrap-dД±r.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
+msgid "Restore system"
+msgstr "Sistemi qur"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
 msgstr ""
-"\n"
-"Bəlkə də bu bir Sürücü bölməsidir.\n"
-"Onda bunu ele belЙ™cЙ™ buraxД±n.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback faylД± adД±: %s"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-disklЙ™ri %s\n"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Another one"
+msgstr "Д°nternet"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Parça böyüklüyü %s\n"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "SЙ™viyyЙ™ %s\n"
+msgid "Colombia"
+msgstr "Kolumbiya"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Ana açılma bölməsi\n"
-"    (MS-DOS açılışı üçün)\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+msgid "Plug'n Play"
 msgstr ""
-"Loopback faylД±:\n"
-"   %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Reunion"
+msgstr "Reyunion"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Mounted\n"
-msgstr "BaДџlД±\n"
+msgid "Details"
+msgstr "ЖЏtraflД±"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Not formatted\n"
-msgstr "ЕћЙ™killЙ™ndirilmЙ™miЕџ\n"
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™bЙ™bi ilЙ™ indi baДџlantД± qopacaqdД±r."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Formatted\n"
-msgstr "ЕћЙ™killЙ™ndirilmiЕџ\n"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Silindr %d -dЙ™n silindr %d-yЙ™\n"
+msgid "Checking your system..."
+msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s sektor"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Г‡ap Edici"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size: %s"
-msgstr "Böyüklüyü: %s"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "BaЕџlanДџД±c: sektor %s\n"
+msgid "Mongolia"
+msgstr "Monqolustan"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Ad: "
+msgid "Mounted\n"
+msgstr "BaДџlД±\n"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "DOS sГјrГјcГј hЙ™rfi: %s (sadЙ™cЙ™ tЙ™xmini)\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "X ilə Açılış"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Rezolyusiya: %s\n"
+msgid "Encryption key for %s"
+msgstr "Parollar uyДџun gЙ™lmir"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Copying %s"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
+"portmapper, NFS ve NIS kimi protokollar tЙ™rЙ™findЙ™n istifadЙ™ edilЙ™n RPC \n"
+"baДџlantД±larД±nД± tЙ™ЕџkilatlandД±rД±r. Portmap vericisi RPC mexanizmini iЕџlЙ™dЙ™n\n"
+"protokollarla xidmЙ™t edЙ™n kompГјterlЙ™rdЙ™ qurulmalД±dД±r vЙ™ iЕџlЙ™dilmЙ™lidir."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
+msgid "Detected hardware"
+msgstr "AvadanlД±q mЙ™'lumatД±na bax"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Mauritius"
+msgstr "Maurit"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Myanmar (Burmese)"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid iflas etdi"
+msgid "Enabling swap partition %s"
+msgstr "Şəkilləndirilən bölmə: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Yeni bölmələr üçün boş sahə yoxdur"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi şəkilləndirildikdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinЙ™cЙ™kdir"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Yeni qurğuların fəallaşmağı üçün sistemi yenidən başlatmalısınız"
+msgid "Armenian (old)"
+msgstr "Ermenicə (köhnə) "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "%s sürücüsünün bölmə cədvəli diskə yazılacaq!"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
 msgstr ""
-"Bu paket yenilЙ™nmЙ™lidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "What type of partitioning?"
-msgstr "Nəcə bölməlandirmə istəyirsən?"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "DiqqЙ™tlД± olun: bu Й™mЙ™liyyat tЙ™hlГјkЙ™lidir."
+msgid ", host \"%s\", port %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "parça böyüklüyü"
+msgid "Monaco"
+msgstr "Monako"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "level"
-msgstr "sЙ™viyyЙ™"
+msgid "%s formatting of %s failed"
+msgstr "%s şəkilləndirilməsində %s bölmə xətası"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "device"
-msgstr "avadanlД±q"
+msgid "Partitioning failed: %s"
+msgstr "Bölmə cədvəli növü: %s"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Various"
-msgstr ""
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "FransД±zca (Kanada/Quebec)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Mount options"
-msgstr "Modul seçənəkləri:"
+msgid "Upgrade"
+msgstr "GГјncЙ™llЙ™mЙ™"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Fayl onsuz da vardД±r. Д°ЕџlЙ™dilsin?"
+msgid "Workstation"
+msgstr "Masa ГјstГј"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"Installing package %s\n"
+"%d%%"
 msgstr ""
-"Fayl baЕџqa bir loopback tЙ™rЙ™findЙ™n istifadЙ™dЙ™dir, baЕџqa\n"
-"birini seçin"
+"%s paketi qurulur\n"
+"%d%%"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kyrgyzstan"
+msgstr "QД±rДџД±zД±stan"
+
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Give a file name"
-msgstr "HЙ™qiqi adД±"
+msgid "With basic documentation"
+msgstr "SЙ™nЙ™dlЙ™r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Fayl sistemi növü: "
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anakron, periodik Й™mr zamanlayД±cД±sД±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Size in MB: "
-msgstr "MB cinsindən böyüklük: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Bir root disk bölümüna ehtiyacınız var.\n"
+"Bunun üçün istər mövcud bir disk bölümü üzərina tıqlayın, \n"
+"ya da yeni birini baЕџdan yaradД±n. Sonra \"BaДџlama \n"
+"Nöqtəsi\"nə gəlin va burayı '/' olaraq dəyişdirin."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Loopback fayl adД±: "
+msgid "Proxy should be http://..."
+msgstr "VЙ™kil verici http://... ЕџЙ™klindЙ™ olmalД±dД±r."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "South Africa"
+msgstr "CЙ™nubi Afrika"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Bu disk bölməsi loopback üçün işlədilməz"
+msgid "Western Sahara"
+msgstr "QЙ™rbi Saxara"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "LVM name?"
-msgstr "LVM adД±?"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "yeni"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "Д°nternet qurДџularД±"
 
 #: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "Monitorunuzu seçin"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Əlavə etmək üçün mövcud bir LVM seçin"
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Əlavə etmək üçün mövcud bir RAID seçin"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Bölmə daşınır..."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Moving"
-msgstr "DaЕџД±nД±r"
+msgid "Please test the mouse"
+msgstr "Xahiş edirik siçanınızı seçin"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "DigЙ™r"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "HansД± sektora daЕџД±maq istЙ™yirsiniz?"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Sector"
 msgstr "Sektor"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "HansД± diskЙ™ daЕџД±maq istЙ™yirsiniz?"
+msgid "Qatar"
+msgstr "Katar"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Move"
-msgstr "DaЕџД±"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "MB cinsindən böyüklük: "
+msgid "LDAP Base dn"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Yeni böyüklük seçin"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "Bu paketi seçə bilməzsiniz, çünki qurmaq üçün yer çatmır."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Resize"
-msgstr "Böyüklüyünü Dəyişdir"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
-"silinЙ™cЙ™kdir"
+msgid "Dialing mode"
+msgstr "YД±Дџma modu"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Bu bölmədəki bütün mə'lumatlar yedəklənməlidir"
+msgid "File sharing"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Hansı bölmə növünü istəyirsiniz?"
+msgid "Clean /tmp at each boot"
+msgstr "/tmp-i hər açılışda təmizlə"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Fat fayl sistemi uclarД± hesaplanД±r"
+msgid "Malawi"
+msgstr "Malavi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "%s avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
+msgid "Please choose your type of mouse."
+msgstr "Xahiş edirik siçanınızın növünü seçin."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
-"Bu disk bölməsi loopback üçün istifadə edildiyindən ötrü bağlanma "
-"nöqtəsindən ayrıla bilinmir.\n"
-"ЖЏvvЙ™lcЙ™ loopback-Д± lЙ™Дџv edin."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "%s avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
+msgid "United Kingdom"
+msgstr "BirlЙ™ЕџmiЕџ KrallД±q"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "%s loopback avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
+#: ../../services.pm:1
+#, c-format
+msgid "running"
+msgstr "iЕџlЙ™mir"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "default"
+msgstr "Й™sas"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "HansД± dili istЙ™yirsiniz?"
+msgid "Indonesia"
+msgstr "Д°ndoneziya"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "FransД±zca"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Bölmə növünü Dəyişdir"
+msgid "restrict"
+msgstr "mЙ™hdudlaЕџdД±r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "must have"
+msgstr "alД±nmalД±"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
-"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
-"silinЙ™cЙ™kdir"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Senegal"
+msgstr "Seneqal"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Loopback faylД± ЕџЙ™killЙ™ndirilir: %s"
+msgid "Command line"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "XГјsusiyyЙ™tlЙ™r: "
+msgid "access to administrative files"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start sector: "
-msgstr "BaЕџlanДџД±Г§ sektoru: "
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Yeni bölmə yarat"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Loopback üçün istifadə et"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Modify RAID"
-msgstr "RAIDi dЙ™yiЕџdir"
+msgid "Montserrat"
+msgstr "Montserrat"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "LVMdЙ™n ayД±r"
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "RAIDdЙ™n ayД±r"
+msgid "Swap"
+msgstr "Swap"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to LVM"
-msgstr "LVMЙ™ Й™lavЙ™ et"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connecting to the Internet "
+msgstr "Д°nternetЙ™ baДџlan"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "RAIDЙ™ Й™lavЙ™ et"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Format"
-msgstr "ЕћЙ™killЙ™ndir"
+msgid "TV card"
+msgstr "TV kartД±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Mə'lumatı göstər"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Bölmə cədvəli qurtarılmağa cəhd edilir"
+msgid ", "
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
-"Disket sГјrГјcГјyЙ™ bir disket yerlЙ™Еџdirin\n"
-"Bu disketdЙ™ki bГјtГјn mЙ™'lumatlar yox olacaqdД±r"
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "XЙ™bЙ™rdarlД±q"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "Növbəni sil"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Posfix, elektronik mЙ™ktublarД±n bir kompГјterdЙ™n digЙ™rinЙ™ yollayan \n"
+"Elektronik MЙ™ktub Yollama VasitЙ™sidir."
+
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Select file"
-msgstr "Fayl seç"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
 msgstr ""
-"Yedək bölmə cədvəli eyni böyüklüyə sahib deyil\n"
-"Davam etmЙ™k istЙ™yirsiniz?"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Network Hotplugging"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Restore From CD"
+msgstr "DisketdЙ™n geri Г§aДџД±r"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Bölmə cədvəlini yaz"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
+"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
+"baДџlantД±nД±zdan faydalana bilЙ™cЙ™klЙ™r.\n"
+"\n"
+"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
+"ehtiyacД±nД±z var."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr "Artıq bölmə yaratmaq üçün, bir bölməni silib məntiqi bölmə yaradın"
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "Artıq bölmə əlavə edilə bilməz"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Bütün birinci bölmələr istifadədədir"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Sabit disk seçkisi"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Avtomatik ayД±r"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Clear all"
-msgstr "HamД±sД±nД± tЙ™mizlЙ™"
+msgid "Latin American"
+msgstr "LatД±n Amerika dili"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
+msgid "Japanese text printing mode"
+msgstr "ЕћЙ™bЙ™kЙ™ni qur"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Qeyd etmЙ™dЙ™n Г‡Д±x"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Old device file"
+msgstr "Fayl seç"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Davam edilsin?"
+msgid "Info: "
+msgstr "MЙ™'lumat: "
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to expert mode"
-msgstr "Usta moduna keç"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Seçənəklər: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Normal moda keç"
+msgid "Please wait"
+msgstr "Xahiş edirik gözləyin"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Undo"
-msgstr "Geri al"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Monitorunuzu seçin"
+msgid "None"
+msgstr "QurtardД±"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Yeni bölmə yarat"
+msgid "The entered IP is not correct.\n"
+msgstr "DoДџrudur?"
 
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Bölmə növünü Dəyişdir"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Ethernet Card"
+msgstr "Eternet KartД±"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS verici"
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "MЙ™'lumat"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS sahЙ™si"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "Qurulum"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Username"
-msgstr "Д°stifadЙ™Г§i adД±"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
 msgstr ""
+"Sürücüdəki bütün bilgiləri və bölmələri silmək üçün\n"
+"\"Oldu\" dГјymЙ™sinЙ™ basД±n. DiqqЙ™tli olun,\"Oldu\" dГјymЙ™sinЙ™ basdД±qdan sonra\n"
+"Windows bilgiləri də daxil olmaq üzərəbütün bölmə mə'lumatı geri dönməyəcək "
+"ЕџЙ™kildЙ™ silinЙ™cЙ™k.\n"
+"\n"
+"\n"
+"Bölmədəki mə'lumatları qoruyaraq \"Ləğv et\" düyməsinə\n"
+"Й™mЙ™liyyatД± lЙ™Дџv edЙ™ bilЙ™rsiniz."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "TanД±tma"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "Д°nternet"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Which username"
-msgstr "Д°stifadЙ™Г§i adД±"
+#: ../../steps.pm:1
+#, c-format
+msgid "Exit install"
+msgstr "Qurulumdan Г§Д±x"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
 msgstr ""
+"HЙ™r Еџey quruldu.\n"
+"Д°ndi isЙ™ Д°nternet baДџlantД±nД±zД± yerli ЕџЙ™bЙ™kЙ™dЙ™kД± baЕџqa kompГјterlЙ™r ilЙ™ "
+"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
+"iЕџlЙ™dilir."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "cpu # "
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
 
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Siçan"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "USB controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
 msgstr ""
+"SistemnizdЙ™ bir dЙ™nЙ™ qurulmuЕџ ЕџЙ™bЙ™kЙ™ adapteri var:\n"
+"\n"
+"%s\n"
+"\n"
+"Yerli ЕћЙ™bЙ™kЙ™ adapterinizi qurmaq ГјzЙ™rЙ™yЙ™m?"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Qurulumdan Г§Д±x"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "Ethiopia"
+msgstr "Efiopiya"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "Ümumi böyüklük: %d / %d Mb"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Scanner"
-msgstr "Ekran kartınızı seçin"
+msgid "disabled"
+msgstr "passivlЙ™Еџdir"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Гњmumi"
+msgid "Search for new scanners"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Modem"
-msgstr "Siçan"
+msgid "Disabling servers..."
+msgstr "VericilЙ™r baДџlanД±r..."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Eternet KartД±"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Processors"
-msgstr ""
+msgid "Installation of %s failed. The following error occured:"
+msgstr "%s qurulumu iflas etdi. Olan xЙ™ta:"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Webcam"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
 #, fuzzy, c-format
-msgid "Soundcard"
-msgstr "SЙ™s kartД±"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"bu vericiləri seçdiniz: %s\n"
+"\n"
+"\n"
+"bu vericilər əsasən fəallaşdırılır. Onların heç bir təhlükəsizlik\n"
+"problemlЙ™ri yoxdur, amma bЙ™'zi xЙ™talar tapД±la bilЙ™r. BelЙ™ olsa, mГјmГјkГјn olan "
+"Й™n yaxД±n zamanda gГјncЙ™llЙ™mЙ™lisiniz.\n"
+"\n"
+"\n"
+"Bu vericilЙ™ri qurmaq istЙ™yirsiniz?\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "DigЙ™r"
+msgid "Network printer (TCP/Socket)"
+msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV kartД±"
+msgid "Backup User files..."
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "Ekran modu"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "Sistemi qur"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "Növ"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "Birinci DNS Vericisi (arzuya görə)"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "DVD-ROM"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "QuraЕџdД±rД±lД±r..."
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "QuraЕџdД±rma artД±q qurtarД±bdД±r, amma fЙ™aliyyЙ™ti dayandД±rД±lД±b."
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "CDROM"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "LILO/grup Qurulumu"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Israeli"
+msgstr "Д°srail"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Disk"
-msgstr "Danimarka dili"
+msgid "load setting"
+msgstr "ЕћЙ™killЙ™ndirilir"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Floppy"
-msgstr "DisketЙ™ qeyd et"
+msgid "Truly minimal install"
+msgstr "Qurulumdan Г§Д±x"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Let me pick any driver"
-msgstr ""
+msgid "Denmark"
+msgstr "Danimarka"
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "Bölmə daşınır..."
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Driver:"
-msgstr "SГјrГјcГј"
+msgid "(This) DHCP Server IP"
+msgstr "CUPS verici IP"
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "QurДџularД±n sД±naДџД±"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "%s paketi qurulur"
 
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Andorra"
+msgstr "Andorra"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "Sierra Leone"
+msgstr "Siera Lione"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No known driver"
-msgstr ""
+msgid "Botswana"
+msgstr "Botsvana"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (ЖЏsas)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Alternative test page (Letter)"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "No open source driver"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "Bir X vericisi seçin"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
+msgid "Swap partition size in MB: "
+msgstr "Swap sahəsi böyüklüyü (Mb): "
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Other (not drakbackup)\n"
+"keys in place already"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Trouble shooting"
+msgid "Formatted\n"
+msgstr "ЕћЙ™killЙ™ndirilmiЕџ\n"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Type of install"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"- Daemon (%s) include:\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+msgid "%d comma separated numbers"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
 msgstr ""
+"rusers protokolu bir ЕџЙ™bЙ™kЙ™dЙ™kД± istifadЙ™Г§ilЙ™rin o ЕџЙ™bЙ™kЙ™dЙ™kД± kompГјterlЙ™rdЙ™\n"
+"işləyən istifadəçiləri görməsinə imkan verər."
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "Automatic Steps Configuration"
+msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
 
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
 msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No alternative driver"
-msgstr ""
+msgid "Barbados"
+msgstr "Barbados"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select data to backup..."
+msgstr "Xahiş edirik istifadə üçün bir dil seçin."
+
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "enable radio support"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Radio support:"
+msgid "received"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_New"
+msgstr "/Fayl/_TЙ™ze"
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "ЕћЙ™killЙ™ndirilir"
+msgid "The DNS Server IP"
+msgstr "CUPS verici IP"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "IP Range End:"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Number of capture buffers:"
+msgid "High"
+msgstr "YГјksЙ™k"
+
+#: ../../any.pm:1
+#, c-format
+msgid "NoVideo"
+msgstr "NoVД°deo"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Bölmə növünü Dəyişdir"
+msgid "Local Printers"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Card model:"
-msgstr "Kart mem (DMA)"
+msgid "Installation image directory"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS Verici"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Гњmumi"
+msgid "Port: %s"
+msgstr "QapД±"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr ""
+msgid "Spain"
+msgstr "Д°spaniya"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Bu istifadЙ™Г§i adД± artД±q vardД±r"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../interactive.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Choose a file"
+msgstr "Monitorunuzu seçin"
 
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Apply"
+msgstr "ЖЏlavЙ™ Et"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Do"
-msgstr "QurtardД±"
+msgid "Auto-detect available ports"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "Internet Connection Sharing currently disabled"
+msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "XЙ™talД± tЙ™rcih, tЙ™krar sД±nayД±n\n"
+msgid "San Marino"
+msgstr "San Marino"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr ""
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "Belgium"
+msgstr "Belçika dili"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "Kuwait"
+msgstr "KГјveyt"
 
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "İstifadə etmək istədiyiniz pəncərə idarəçisini seçin:"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "sub generation of the cpu"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "First Time Wizard"
+msgstr "Д°lk DЙ™fЙ™ SehirbazД±na XoЕџ GЙ™ldiniz"
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
+"Bir xЙ™ta oldu, fЙ™qЙ™t necЙ™ dГјzЙ™ldilЙ™cЙ™yini bilmirЙ™m.\n"
+"Davam edin, riski sizЙ™ aitdir!"
 
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
-
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Seçənəklər: %s"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "xahiş edirik, gözləyin, fayl daranır: %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Seçkiniz? (əsas %s) "
+msgid "Taiwan"
+msgstr "Tayland"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Pakistan"
+msgstr "Pakistan"
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
-"%s modulunun yГјklЙ™nmЙ™si iflas etdi.\n"
-"YenidЙ™n baЕџqa bir parametr ilЙ™ sД±namaq istЙ™yirsiniz?"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "BuraxД±lД±Еџ: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Specify options"
-msgstr "Seçənəkləri göstər"
+msgid "Provider name (ex provider.net)"
+msgstr "Д°nternet xidmЙ™t vericinizin adД± (mЙ™sЙ™lЙ™n azeronline.com)"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Avtomatik yoxla"
+msgid "Version: %s\n"
+msgstr "BuraxД±lД±Еџ: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
 msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
-"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
-"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
-"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
-"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
-"kompüterinizə heç bir şey olmaz."
+"Sizin sisteminizin qaynaqlarД± Г§atД±ЕџmД±r. Qurulum Й™rzindЙ™ problem yaЕџaya "
+"bilЙ™rsiniz\n"
+"Bu baş verərsə mətn aracılığı ilə qurulumu sınamalısınız. Bunun üçün "
+"dЙ™CDROMdan baЕџlatdД±ДџД±nД±z zaman,\n"
+" 'F1'Й™ basД±n vЙ™ 'text' yazaraq enter'Й™ basД±n."
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "HansД± %s sГјrГјcГјsГј sД±nansД±n?"
+msgid "Use the Windows partition for loopback"
+msgstr "Loopback üçün Windows bölməsini işlət"
 
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Module options:"
-msgstr "Modul seçənəkləri:"
+msgid "Armenian (typewriter)"
+msgstr "ErmenicЙ™ (yazД± maЕџД±nД±)"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
-"ParametrlЙ™r``ad=qiymЙ™t ad2=qiymЙ™t2...'' ЕџЙ™klindЙ™ olmalД±dД±r.\n"
-"MЙ™sЙ™lЙ™n ``io=0x300 irq=7''"
+msgid "Connection type: "
+msgstr "Bağlantı növü:"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "X ilə Açılış"
 
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "(module %s)"
-msgstr "(modul %s)"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "3D avadanlД±q sГјr'Й™tlЙ™ndirmЙ™si ilЙ™ XFree %s"
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "%s kartı (%s) üçün sürücü yüklənir"
+msgid "India"
+msgstr "Hindistan"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "See hardware info"
-msgstr "AvadanlД±q mЙ™'lumatД±na bax"
+msgid "Chad"
+msgstr "Г‡ad"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Heç %s ara üzü var?"
+msgid "Slovakia"
+msgstr "Slovakiya"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "BaЕџqa var?"
+msgid "Singapore"
+msgstr "Sinqapur"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "%s %s ara ГјzГј tapД±ldД±"
+msgid "Cambodia"
+msgstr "Kambodiya"
 
-#: ../../modules/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
-
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Bölmə şəkilləndirilməsi"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Monitorun Ећaquli DaramasД±: %s\n"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "comma separated numbers"
+msgid "Path"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%d comma separated numbers"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "a number"
-msgstr "Telefon nömrəsi"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
-"ADSL ilЙ™ internetЙ™ baДџlanmanД±n Й™n yaxЕџД± yolu pppoe'dur.\n"
-"BЙ™zi baДџlantД±lar pptp istifadЙ™ edir, Г§ox azД± isЙ™ dhcp iЕџlЙ™dir.\n"
-"Bilmirsiniz isə 'pppop istifadə et'i seçin"
-
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Д°nternetЙ™ baДџlan"
 
-#: ../../network/adsl.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Alcatel speedtouch usb"
+msgid "China (broadcast)"
 msgstr ""
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "dhcp istifadЙ™ et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "pptpe istifadЙ™ et"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pppoe"
-msgstr "pppoe istifadЙ™ et"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Other ports"
-msgstr "QapД±larД± sД±na"
+msgid "Use quota for backup files."
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "Г‡ap Edicini Qur"
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Internet connection"
+msgstr "İnternet Bağlantısı Bölüşdürülməsi"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
+"%s modulunun yГјklЙ™nmЙ™si iflas etdi.\n"
+"YenidЙ™n baЕџqa bir parametr ilЙ™ sД±namaq istЙ™yirsiniz?"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Welcome to the Open Source world."
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
+msgid "Bosnia and Herzegovina"
+msgstr "Bosniya vЙ™ Herzoqovina"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
 msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
-"tinyfirewall configurator\n"
-"\n"
-"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
-"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
-"Firewall\n"
-"buraxД±lД±ЕџД±nД± tЙ™dqiq edin."
+"Bu bağlama nöqtəsi üçün həqiqi bir fayl sisteminə (ext2, reisrfs)\n"
+"ehtiyac vardД±r.\n"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "No network card"
-msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Xahiş edirik siçanınızı seçin"
 
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "Verici"
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Netherlands"
+msgstr "Hollandiya"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Databeyz"
+msgid "Sending files by FTP"
+msgstr "Fayla qeyd et"
 
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "SahЙ™(domain) adД±"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Daxili ISDN kart"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
+msgstr ""
+
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "Web Server"
-msgstr "Verici"
+msgid "Title"
+msgstr "CЙ™dvЙ™l"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Install & convert Fonts"
 msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Host name"
-msgstr "Ev sahibi adД±"
+msgid "WARNING"
+msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Ev sahibi adД±"
+msgid "Installing bootloader"
+msgstr "Sistem yГјklЙ™yicini qur"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "replay"
+msgstr "TЙ™krarla"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Configuring network"
-msgstr "ЕћЙ™bЙ™kЙ™ QurДџularД±"
+msgid "detected %s"
+msgstr "%s tapД±ldД±"
 
-#: ../../network/ethernet.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
+msgid "Virgin Islands (U.S.)"
+msgstr "Virgin AdalarД± (ABЕћ)"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Şəbəkə ara üzünü seçin"
+msgid "Bad backup file"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"Sisteminizdə heç bir eternet şəbəkə adapteri tapıla bilmədi.\n"
-"Bu baДџlantД± ЕџЙ™klini qura bilmЙ™rЙ™m."
+"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
+"VЙ™ artД±q passivlЙ™ЕџdirilmiЕџdir.\n"
+"\n"
+"NЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../network/ethernet.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Enter IP address and port of the host whose printers you want to use."
 msgstr ""
-"HansД± dhcp alД±cД±sД±nД± istifadЙ™ edЙ™cЙ™ksiniz?\n"
-"ЖЏsasД± dhcp-client dir"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
+msgid "Pipe into command"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
 msgstr ""
-"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
-"kartlardan birini seçin."
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "HansД±sД± sizin ISDN kartД±nД±zdД±r?"
+"Sisteminizdaki bə'zi avadanlıqlar işləməsi üçün düzgün sürücülərə ehtiyac "
+"duyar.\n"
+"Bunun haqqД±nda %s dЙ™/a lazД±mi malumatlarД± tapa bilЙ™rsiniz"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "ISDN Configuration"
-msgstr "ISDN quraЕџdД±rД±lmasД±"
+msgid "Detecting devices..."
+msgstr "AvadanlД±qlar tanД±nД±r..."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Abort"
-msgstr "DayandД±r"
+msgid "Click here to launch the wizard ->"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Continue"
-msgstr "Davam et"
+msgid "Haiti"
+msgstr "Haiti"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
+"Description of the fields:\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
 msgstr ""
-"\n"
-"ISA kartД±nД±z var isЙ™ sonrakД± ekrandakД± qiymЙ™tlЙ™r doДџru olmalД±dД±r.\n"
-"\n"
-"PCMCIA kartД±nД±z var isЙ™ kartД±nД±zД±n irq vЙ™ ya io'sunu bilmЙ™lisiniz.\n"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "I don't know"
-msgstr "BilmirЙ™m"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "PCI"
-msgstr "PCI"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "the name of the CPU"
+msgstr ""
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Hansı növ kartınız var?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
 
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "You must also format %s"
 msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "HansД± protokolu istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+msgid "Be careful: this operation is dangerous."
+msgstr "DiqqЙ™tlД± olun: bu Й™mЙ™liyyat tЙ™hlГјkЙ™lidir."
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "BГјtГјn dГјnya"
+msgid "Insert a floppy containing package selection"
+msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"BГјtГјn dГјnya \n"
-" D-Channel'lЙ™ xaric (kiralД±q xЙ™tlЙ™r)"
+msgid "Server: "
+msgstr "Verici"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "European protocol"
-msgstr "Açılış Protokolu"
+msgid "Security Alerts:"
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
 
-#: ../../network/isdn.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Avropa (EDSS1)"
+msgid "Sweden"
+msgstr "İsveçcə"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "Use Expect for SSH"
 msgstr ""
-"İnternet xidmət vericinizi seçin.\n"
-"Siyahıda deyilsə Siyahıda deyil'i seçin."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "External ISDN modem"
-msgstr "Xarici ISDN kart"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Daxili ISDN kart"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "ISDN bağlantınızın növü nədir?"
+msgid "Poland"
+msgstr "PolЕџa"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД± SehirbazД±"
+msgid "Importance: %s\n"
+msgstr "ЖЏhЙ™miyyЙ™t: %s\n"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
 
-#: ../../network/isdn.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
+msgid "Other ports"
+msgstr "QapД±larД± sД±na"
 
-#: ../../network/isdn.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "amma oxЕџamД±r"
-
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Qurulum"
-
-#: ../../network/modem.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgid "SMBus controllers"
 msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Title"
-msgstr "CЙ™dvЙ™l"
+msgid "Connection timeout (in sec)"
+msgstr "Bağlantı növü:"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "İkinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Birinci DNS Vericisi (arzuya görə)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "SahЙ™(domain) adД±"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "Skript Й™saslД±"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Terminal-based"
-msgstr "Terminal Й™saslД±"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Croatian"
+msgstr "XД±rvatca"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "GiriЕџ adД±"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Var olan bölmələri işlədimmi"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "Telefon nömrəsi"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Fork edilЙ™ bilmir: %s"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Connection name"
-msgstr "BaДџlantД± adД±"
+msgid "/Help/_About..."
+msgstr "/Kömək/_Haqqında..."
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dialup options"
-msgstr "Çevirməli şəbəkə seçənəkləri"
+msgid "Remove user directories before restore."
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "could not find any font in your mounted partitions"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+msgid "F00f bug"
 msgstr ""
-"Bu edildikdən sonra Xdən çıxmağınızı tövsiyyə edirik, yoxsa\n"
-"verici adД± xЙ™sarЙ™tlЙ™ri meydana gЙ™lЙ™ bilЙ™r."
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"TЙ™brik edirik, internet vЙ™ ЕџЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД± qurtardД±.\n"
-"\n"
-"QurДџular indi sisteminizЙ™ Й™lavЙ™ edilЙ™cЙ™k.\n"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
 msgstr ""
-"ЕћЙ™bЙ™kЙ™nin yenidЙ™n baЕџladД±lmasД± sД±rasД±nda xЙ™ta oldu: \n"
-"\n"
-"%s"
+"HansД± dhcp alД±cД±sД±nД± istifadЙ™ edЙ™cЙ™ksiniz?\n"
+"ЖЏsasД± dhcp-client dir"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"Bu paket yenilЙ™nmЙ™lidir\n"
-"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+msgid "Domain Name:"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "DisketЙ™ qeyd et"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Internet connection"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
+msgid "Restore"
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "İstifadə edəcəyiniz vasitəni seçin"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages..."
+msgstr "Mövcud olan paketlər axtarılır."
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "eternet kart tapД±ldД±"
+msgid "Init Message"
+msgstr "Д°nit Д°smarД±cД±"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN connection"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+msgid "Rescue partition table"
+msgstr "Bölmə cədvəlini qurtar"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Kabel baДџlantД±sД±"
+msgid "Connection complete."
+msgstr "Bağlantı növü:"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Cable connection"
-msgstr "Kabel baДџlantД±sД±"
+msgid "Cyprus"
+msgstr "Kipr (Yunan vЙ™ TГјrk) "
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "%s tapД±ldД±"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove from RAID"
+msgstr "RAIDdЙ™n ayД±r"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "Bu parol Г§ox sadЙ™dir (en az %d xarakter boyunda olmalД±dД±r)"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected %s"
-msgstr "%s tapД±ldД±"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД± SehirbazД±"
 
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "ISDN connection"
 msgstr "ISDN BaДџlantД±sД±"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Normal modem tЙ™sbiti"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "detected on port %s"
-msgstr "%s qapД±sД±nda tapД±ldД±"
+msgid "primary"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Normal modem tЙ™sbiti"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detecting devices..."
-msgstr "AvadanlД±qlar tanД±nД±r..."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
+"İndi, açılışda avtomatik olaraq başlamasını istədiyiniz xidmətləri \n"
+"seçə bilərsiniz. Siçan bir maddənin üzərina gəldiyində o xidmətin rolunu "
+"açıqlayan\n"
+"kiçik bir baloncuq ortaya çıxacaqdır.\n"
+"\n"
+"ЖЏgЙ™r kompГјterinizi bir verici olaraq istifadЙ™ edЙ™cЙ™ksЙ™niz bu addД±mda tam bir "
+"diqqЙ™t ayД±rmalД±sД±nД±z:\n"
+"mühtəməldir ki lazımi heç bir xidməti başlatmaq istəməzsiniz."
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Usta Modu"
+msgid "Skip"
+msgstr "NЙ™zЙ™rЙ™ Alma"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Niue"
+msgstr "Niu"
 
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Qurulacaq profili seçin"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Açılış sırasında başlamaq üçün qurulmuş bütün şəbəkə axtar üzlərini "
+"fЙ™allaЕџdД±rД±r ya da qapatД±r."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"Şəbəkə Quraşdırma Sehirbazına Xoç Gəldiniz\n"
-"\n"
-"Д°nternet/ЕћЙ™bЙ™kЙ™ qurДџularД±nД±zД± edЙ™cЙ™yik.\n"
-"Avtomatik tЙ™sbit istЙ™mirsiniz isЙ™ iЕџarЙ™ti qaldД±rД±n.\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "important"
+msgstr "vacib"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
 msgstr ""
-"Şəbəkədən quraşdırması apardığınız üçün şəbəkəniz artıq qurulmuş olmalıdır.\n"
-"Şəbəkə/İnternet bağlantınızı yenidən quraşdırmaq üçün Oldu'ya yoxsa Ləğv "
-"et'Й™ basД±n.\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX PCI SCSI adapterleri axtarmaДџa cЙ™hd edЙ™cЙ™k. ЖЏgЙ™ DrakX SCSI\n"
+"taparsa vЙ™ hansД± sГјrГјcГј iЕџlЙ™dilЙ™cЙ™yini bilЙ™rsЙ™, her Еџey Г¶z Г¶zГјnЙ™\n"
+"qurulacaq.\n"
 "\n"
 "\n"
-"Press OK to continue."
-msgstr ""
+"ЖЏgЙ™r sisteminizdЙ™ SCSI adapteri yoxsa, DrakXin tanД±mayacaДџД± bir\n"
+"ISA SCSI vЙ™ ya PCI SCSI adapteri var isЙ™, sizЙ™ sisteminizdЙ™ SCSI\n"
+"adapteri olub olmadД±ДџД± soruЕџulacaq.\n"
+"ЖЏgЙ™r SCSI adapteriniz yox isЙ™, \"Yox\" tД±qlayД±n. ЖЏgЙ™r \"Var\"Д± "
+"tД±qlayarsanД±z.\n"
+"qarşınıza sürücüləin siyahısı çıxacaq, oradan sizə uyanını seçərsiniz.\n"
 "\n"
-"BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
-"bilЙ™rsiniz."
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
 "\n"
-"BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
-"bilЙ™rsiniz."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Д°nternet baДџlantД±sД± & quraЕџdД±rД±lmasД±"
+"ЖЏgЙ™r Й™llЙ™ qurmaДџД± sЙ™Г§Й™rsЙ™niz, o zaman DrakX sizЙ™ adapterin xГјsusiyyЙ™tlЙ™rini\n"
+"soruЕџacaq. Д°mkan verin ki, DrakX sЙ™rbЙ™stcЙ™ Г¶zГј xГјsusiyyЙ™tlЙ™ri tapsД±n.\n"
+"Г‡oxunda bu iЕџЙ™ yarayД±r.\n"
+"\n"
+"\n"
+"Əgər istəmirsəniz isə, o zaman adapter üçün xüsusiyyətləri özünüz\n"
+"göstərməlisiniz. Bunun üçün İstifadəçinin Əl Kitabçasına\n"
+"(başlıq 3, \"Avadanlığınız üçün kollektiv mə'lumat) bölməsinə\n"
+"baxın. Ya da avadanlığınızın əl kitabçasından və ya\n"
+"veb sЙ™hifЙ™sindЙ™n (ЖЏgЙ™r internetЙ™ Г§Д±xД±ЕџД±nД±z var isЙ™)\n"
+"ya da Microsoft Windowsdan (ЖЏgЙ™r sisteminizdЙ™ qurulu isЙ™)\n"
+"mЙ™'lumat alД±n."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "ЕћЙ™bЙ™kЙ™ni qur"
+msgid "Users"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Disconnect"
-msgstr "BaДџlantД±nД± kЙ™s"
+msgid "Aruba"
+msgstr "Aruba"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Connect"
-msgstr "BaДџlan"
+msgid "Preparing bootloader..."
+msgstr "Açılış yükləyici hazırlanır"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
+msgid "Gateway (e.g. %s)"
 msgstr ""
-"\n"
-"BaДџlantД±nД±zД± yenidЙ™n quraЕџdД±ra bilЙ™rsiniz."
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "The passwords do not match"
+msgstr "Parollar uyДџun gЙ™lmir"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
 msgstr ""
-"\n"
-"Д°stЙ™sЙ™niz Д°nternetЙ™ baДџlana bilЙ™rsiniz ya da yeniden quraЕџdД±ra bilЙ™rsiniz."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "HЙ™lЙ™ Д°nternetЙ™ baДџlД± deyilsiniz."
+msgid "Frequency (MHz)"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"\n"
-"BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
-"bilЙ™rsiniz."
+"Bu saxlanmış paketlər seçkisini işlətmək üçün qurulumu ``linux "
+"defcfg=floppy''ilЙ™ baЕџladД±n."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "ArtД±q Д°nternetЙ™ baДџlД±sД±nД±z."
+msgid "the number of the processor"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "VЙ™kil verici http://... ЕџЙ™klindЙ™ olmalД±dД±r."
+msgid "Hardware clock set to GMT"
+msgstr "Avadanlıq saatınız GMT-yə göra quruludur mu?"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "HЙ™qiqi adД±"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "VЙ™kil verici http://... ЕџЙ™klindЙ™ olmalД±dД±r."
+msgid "Change Cd-Rom"
+msgstr "Cd-Romu dЙ™yiЕџdir"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP vЙ™kil verici"
+msgid "Paraguay"
+msgstr "Paraqvay"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP vЙ™kil verici"
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "VЙ™kil vericilЙ™r quraЕџdД±rД±lmasД±"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr "zorla"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
+msgid "Exit"
+msgstr "Ext2"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "Keçit avadanlığı"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
+"Qurulu ara ГјzГјnГјz yoxdure.\n"
+"ЖЏvvЙ™lcЙ™ onlarД±  'QuraЕџdД±r'a basaraq qurun"
 
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS verici"
+msgid "Estonian"
+msgstr "Estoniya dili"
 
-#: ../../network/network.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
 msgstr ""
-"XahiЕџ edirik kompГјterinizn adД±nД± girin.\n"
-"MЙ™sЙ™lЙ™n``kompГјteradД±.sahЙ™adД±.com''.\n"
-"Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
+"Apache bir World Wide Web vericisidir. HTML faylları və CGI verilməsi üçün "
+"istifadЙ™ edilir."
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "DHCP AlД±cД±sД±"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Choose the network interface"
+msgstr "Şəbəkə ara üzünü seçin"
+
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown Model"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "CD/DVD burners"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Ana açılma bölməsi\n"
+"    (MS-DOS açılışı üçün)\n"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Açılışda başladılır"
+msgid "choose image"
+msgstr "Monitorunuzu seçin"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Xahiş edirik siçanınızı seçin"
+#: ../../network/shorewall.pm:1
+#, c-format
+msgid "Firewalling configuration detected!"
+msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr "BaДџlantД± adД±"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Ev sahibi adД±"
+msgid "Updating package selection"
+msgstr "Paket seçkilərini saxla"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "Netmask"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "%s loopback avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "IP address"
-msgstr "IP ГјnvanД±"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "the number of buttons the mouse has"
+msgstr "2 dГјymЙ™li"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Automatic IP"
-msgstr "AvtomatlaЕџdД±rД±lmД±Еџ IP"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (sГјrГјcГј %s)"
+msgid "Replay"
+msgstr "TЙ™krarla"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "%s ЕџЙ™bЙ™kЙ™ avadanlД±ДџД± qurulur"
+msgid "No floppy drive available"
+msgstr "Disket sГјrГјcГј yoxdur"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr "Xahiş edirik bu kompüter üçün IP qurğularını girin"
+msgid "Backup files are corrupted"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "TV norm:"
 msgstr ""
-"DİQQƏT: Bu avadanlıq daha əvvəl İntenetə bağlanmaq üçün qurulmuşdur.\n"
-"AvadanlД±ДџД±n qurДџularД±nД± dЙ™yiЕџdirmaЙ™k istЙ™mirsiniz isЙ™,\n"
-"OLDU ya basД±n.\n"
-"AЕџaДџД±dakД± giriЕџlЙ™ri dГјzЙ™ltmЙ™niz Г¶zГјnГј Й™vvЙ™lki qurДџularД±n ГјstГјnЙ™ yazacaqdД±r."
 
-#: ../../network/shorewall.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cpuid family"
 msgstr ""
-"DiqqЙ™t! Var olan Firewall qurДџusu tapД±ldД±. YГјklЙ™mЙ™dЙ™n sonra bir az Й™l "
-"gЙ™zdirЙ™ bilЙ™rsiniz."
 
-#: ../../network/shorewall.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Oddan divar (Firewall) quruluЕџu tapД±ldД±!"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "Hesap Parolu"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Litvanya dili AZERTY (yeni)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Hesab GiriЕџi (istifadЙ™Г§i adД±)"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Bağlantı növü:"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Bir proqram tə'minatlı RAID bölməsini kök qovluğu (/) olaraq tə'yin "
+"etdiniz.\n"
+"Əgər lilo ya da grub istifadə etmək istəyirsinizsə, bir /boot bölməsi\n"
+"Й™lavЙ™ etmЙ™yi unutmayД±n"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Bağlantı növü:"
+msgid "Previous"
+msgstr "<- ЖЏvvЙ™lki"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "YД±Дџma modu"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Klaviaturanızı seçin"
+msgid "Other OS (MacOS...)"
+msgstr "DigЙ™r sistemlЙ™r (MacOS...)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "Dns xidmətcisi 2 (arzuya görə)"
+msgid "To activate the mouse,"
+msgstr "Siçanınızı işə salmaq üçün,"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "Dns xidmətcisi 1 (arzuya görə)"
+msgid "Bringing up the network"
+msgstr "ЕћЙ™bЙ™kЙ™ fЙ™allaЕџdД±rД±lД±r"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "İXM telefon nömrəsi"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Д°nternet xidmЙ™t vericinizin adД± (mЙ™sЙ™lЙ™n azeronline.com)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
+"Sürücünüzdə bir və ya daha çox Windows bölməsi tapıldı.\n"
+"Xahiş edirik Linuks Mandrakeni qurmaq üçün onlardan birini "
+"yenidənölçüləndirmək üzərə seçin.\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, her bölmə bu cür sıralanıb; \"Linuks adı\",\"Windows\n"
+"adД±\"\"HЙ™cm\".\n"
+"\n"
+"\"Linuks adı\" bu cür kodlanıb: \"sürücü növü\", \"sürücü nömrəsi\",\"bölmə "
+"nömrəsi\" (məsələn, \"hda\").\n"
+"\n"
+"\n"
+"\"Sürücü növü\" sürücünüz IDE sürücü isə \"hd\"dirSCSI sürücü isə\n"
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
+"sürücülər üçün:\n"
+"\n"
+"*\"a\" yЙ™ni \"birinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
+"\n"
+"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
+"\n"
+"*\"c\" yЙ™ni \"ikinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
+"\n"
+"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
+"\n"
+"\n"
+"SCSI sГјrГјcГјlЙ™rindЙ™ \"a\" nД±n mЙ™nasД± \"birinci sГјrГјcГј\",\n"
+"\"b\"nin mЙ™nasД± \"ikinci sГјrГјcГј\"dГјr vs..."
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Sizin şəxsi telefon nömrəniz"
+msgid "Tanzania"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Kart IO_1"
+msgid "Computing FAT filesystem bounds"
+msgstr "Fat fayl sistemi uclarД± hesaplanД±r"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Kart IO_0"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Card IO"
-msgstr "Kart IO"
+msgid "Content of the file"
+msgstr "Fayl mЙ™zmunu"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Kart mem (DMA)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication LDAP"
+msgstr "TanД±tma"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "Kart IRQ"
+msgid "Let me pick any driver"
+msgstr ""
 
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profil: "
 
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "BaДџlantД± quraЕџdД±rД±lmasД±"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "transmitted"
 msgstr ""
-"Sisteminiz Д°nternetЙ™ baДџlД± deyil.\n"
-"BaДџlantД±nД± yenidЙ™n quraЕџdД±rД±n"
 
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™bЙ™bi ilЙ™ indi baДџlantД± qopacaqdД±r."
-
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Д°nternetЙ™ artД±q baДџlД±sД±nД±z"
+msgid "Palestine"
+msgstr "Paket seçkilərini saxla"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "BaДџlantД±nД±z sД±nanД±r..."
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/tools.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Д°nternete giriЕџi indi sД±namaq istЙ™yirsiniz?"
+msgid "%d comma separated strings"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Д°nternet qurДџularД±"
+msgid "Here is the full list of keyboards available"
+msgstr "Bütün mövcud klaviaturaların siyahısı"
 
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
+msgid "Theme name"
+msgstr "PaylaЕџdД±rma adД±"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Help"
+msgstr "/_Kömək"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
-"BЙ™'zЙ™n sГјrГјcГјnГјzdЙ™ pis ЕџeylЙ™r ola bilЙ™r.\n"
-"Datanın bütövlüyü yoxlaması bacarılmadı. \n"
-"Bu o demekdir ki diskЙ™ yazД±lan hЙ™r Еџey tЙ™sadГјfi olacaqdД±r"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid " (Default)"
-msgstr " (ЖЏsas)"
+msgid "the width of the progress bar"
+msgstr ""
 
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "CUPS verici IP"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr "Kuku AdalarД±"
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "Formatting partition %s"
+msgstr "Şəkilləndirilən bölmə: %s"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Hostname required"
+msgstr "Ev sahibi adД±:"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "CUPS"
+msgid "Unselect fonts installed"
 msgstr ""
 
-#: ../../printer/cups.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "Cancel"
+msgstr "LЙ™Дџv et"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(modul %s)"
+msgid "Searching for configured scanners ..."
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../printer/data.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Wheel"
+msgstr "Г‡Й™rx"
 
-#: ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "Ekran modu"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LPRng"
+msgid "\tBackups use tar and bzip2\n"
 msgstr ""
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "Növbəni sil"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "Uzaq Г‡ap Edici"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
 msgstr ""
+"DД°QQЖЏT!\n"
+"\n"
+"DrakX \"Windows\" disk bölmənizin böyüklüyünü dəyişdirəcək. Bu iş \n"
+"tehlГјkЙ™li ola bilЙ™r. AЕџina deyil isЙ™niz qurulumdan Г§Д±xД±n vЙ™ \"Windows\" \n"
+"altД±nda \"Scandisk\" (lazД±m gЙ™lЙ™rsЙ™ \"defrag\" da) proqramД±nД± Г§alД±ЕџdД±rД±n. "
+"ArdД±ndan quruluma \n"
+"davam edin. VerilЙ™rinizin yedЙ™yini almaДџД± da unutmayД±n!"
 
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "PDQ"
-msgstr ""
+msgid "Other"
+msgstr "DigЙ™r"
 
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Default"
+msgstr "ЖЏsas"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Button 2 Emulation"
+msgstr "DГјymЙ™ 2 emulyasiyasД±"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Unknown model"
+msgid "type1inst building"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "QapД±"
+msgid "Abiword"
+msgstr "DayandД±r"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Host %s"
-msgstr "Ev sahibi adД±"
+msgid "choose image file"
+msgstr "Monitorunuzu seçin"
 
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "X server"
+msgstr "X verici"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Network %s"
-msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
+msgid "Domain Admin User Name"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Ara Гјz %s"
+msgid "There was an error while scanning for TV channels"
+msgstr "PaketlЙ™r qurulurkЙ™n bir xЙ™ta oldu:"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard (international)"
+msgstr "Amerikan (US) klaviaturasД± (beynЙ™lmilЙ™l)"
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
+msgid "Not installed"
+msgstr "Qurulumdan Г§Д±x"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "LAN connection"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "/File/-"
+msgstr "/Fayl/-"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Italian"
+msgstr "Д°talyanca"
 
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "Basic"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "Honduras"
+msgstr "Honduras"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "%s faylД±na yazarkЙ™n xЙ™ta oldu"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO"
+msgstr "Kart IO"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ", multi-function device"
+msgid "when checked, owner and group won't be changed"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
 msgstr ""
+"\n"
+"Bu, ikili açılış üçün xüsusi\n"
+"Bootstrap-dД±r.\n"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t-Network by FTP.\n"
+msgstr ""
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "Rusca (Yawerty)"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Г‡ap Edicisiz"
+msgid "You must enter a device or file name!"
+msgstr "Г‡ap Edici avadanlД±ДџД± URI"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Quit"
+msgstr "Г‡Д±x"
+
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid " on parallel port \\#%s"
+msgid "Graphics memory: %s kB\n"
+msgstr "Ekran kartД± yaddaЕџД±: %s KB\n"
+
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "access to compilation tools"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Yerli Г‡ap Edici"
+msgid "Please select data to restore..."
+msgstr "Xahiş edirik istifadə üçün bir dil seçin."
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Pipe job into a command"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
 msgstr ""
+"Aboot istifadЙ™ etmЙ™yi istЙ™yirsinizsЙ™, boЕџ disk sahЙ™si (2048 sektor bЙ™sdir.)\n"
+"buraxmayД± unutmayД±n."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+msgid "Standard test page"
+msgstr "Standart"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Г‡ap Edici Vericisi"
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create"
+msgstr "Yarat"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "What"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "PaketlЙ™ri istЙ™rkЙ™n bir xЙ™ta oldu:"
+
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
+msgid "Bulgarian (BDS)"
+msgstr "Bulqarca"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Uzaq Г§ap edici vericisi(lpd)"
+msgid "Disable Server"
+msgstr "Databeyz"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Uzaq CUPS vericisi"
+msgid "Filesystem encryption key"
+msgstr "Fayl sistemi növü: "
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Remote printer"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Gujarati"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Yerli Г‡ap Edici"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Г‡ap Edicini Qur"
+msgid "Save theme"
+msgstr "Sistemi qur"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Г‡ap Edici"
+msgid "group"
+msgstr "Д°Еџ qrupu"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr "Braziliya"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "ЕћЙ™bЙ™kЙ™ni yenidЙ™n baЕџlatmaq istЙ™yirsiniz?"
+msgid "Auto Install"
+msgstr "Qurulum"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Uzaq Г‡ap Edici"
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#, c-format
+msgid "Network Configuration Wizard"
+msgstr "ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД± SehirbazД±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
+msgid "Removable media automounting"
+msgstr "Taxılıb sökülə bilən avadanlıqların avtomatik bağlanması"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Print test pages"
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
+msgid "Printing"
+msgstr "Г‡ap Edici"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "Yeni bölmə yarat"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "SГјrГјcГј"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "unknown"
+msgstr "bilinmЙ™yЙ™n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "Fdisk istifadЙ™ et"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "TЖЏKЖЏRД° OYNADIN!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Yerli Г‡ap Edici"
+msgid "Automatic IP"
+msgstr "AvtomatlaЕџdД±rД±lmД±Еџ IP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Çap edici seçənəkləri"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
+msgid "Configuration of a remote printer"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Moldova"
+msgstr "Moldova"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Г‡ap Edici BaДџlantД±sД±"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "VЙ™kil verici http://... ЕџЙ™klindЙ™ olmalД±dД±r."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
 msgstr "Г‡ap Edicisiz"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Close"
-msgstr "Qapat"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"İstəsəniz indi %s modulunun parametrlərini göstərə bilərsiniz.\n"
+"ParametrlЙ™r``ad=qiymЙ™t ad2=qiymЙ™t2...'' ЕџЙ™klindЙ™ olmalД±dД±r.\n"
+"MЙ™sЙ™lЙ™n ``io=0x300 irq=7''"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Д°nternet qurДџularД±"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "Bölmə cədvəlini qeyd etmədən çıxırsınız?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
+
+#: ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Г‡ap Edicisiz"
+msgid "Installing packages..."
+msgstr "%s paketi qurulur"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Normal Mode"
-msgstr "Normal Mod"
+msgid "Dutch"
+msgstr "Hollandiya dili"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "ЕћЙ™bЙ™kЙ™ni qur"
+msgid "The following packages need to be installed:\n"
+msgstr "AЕџaДџД±dakД± paketlЙ™r qurulacaqdД±r"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr "Anqola"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "service setting"
+msgstr "avadanlД±q"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "XГјsusi"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
 msgstr ""
+"Fayl baЕџqa bir loopback tЙ™rЙ™findЙ™n istifadЙ™dЙ™dir, baЕџqa\n"
+"birini seçin"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
-"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
+#: ../../lang.pm:1
+#, c-format
+msgid "Latvia"
+msgstr "Latviya"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Printing system: "
+msgid "No known driver"
 msgstr ""
 
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "%s paketi qurulur"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Г‡ap Edicini Qur"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Local Area Network..."
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ni QuraЕџdД±r..."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Г‡ap Edicini Qur"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr "KompГјterinizdЙ™ sЙ™s sistemД± baЕџladД±n"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
 msgstr "CUPS sГјrГјcГј datasД± oxunur..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+msgid "Information"
+msgstr "Mə'lumatı göstər"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Çap Edici Bağlantısı Seçin"
+msgid "No network card"
+msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Yerli Г‡ap Edici"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "HansД± dili istЙ™yirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "%s paketi qurulur"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 dГјymЙ™li"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Rezolyusiya: %s\n"
+msgid "Detailed information"
+msgstr "Mə'lumatı göstər"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+msgid "Malta"
+msgstr "Malta"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "Bu floppi FAT ЕџЙ™klindЙ™ deyildir"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "ЕћГјbhЙ™ci"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "ЕћЙ™bЙ™kЙ™ QurДџularД±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, fuzzy, c-format
-msgid "high"
-msgstr "YГјksЙ™k"
+msgid "Graphic Card"
+msgstr "Ekran kartД±"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Fat fayl sistemi uclarД± hesaplanД±r"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Configuration of a remote printer"
-msgstr ""
+msgid "Provider dns 1 (optional)"
+msgstr "Dns xidmətcisi 1 (arzuya görə)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
-msgstr ""
+msgid "Cameroon"
+msgstr "Kamerun"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
 msgstr ""
+"İndi %s sabit diskinizi bölmələndirə bilərsiniz\n"
+"Д°Еџinizi bitirdiyinizdЙ™ `w' ilЙ™ qeyd etmЙ™yi unutmayД±n"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "ЕћЙ™bЙ™kЙ™ni qur"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "ЕћЙ™bЙ™kЙ™ QurДџularД±"
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Close"
+msgstr "Qapat"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Monitor qurulmayД±b"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "BaДџlantД±nД±z baЕџladД±lД±r..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "TЙ™qvim"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Д°nternet qurДџularД±"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
+"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
+"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
+"adД±nД±nД± vermЙ™lisiniz."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "New printer name"
-msgstr "Г‡ap Edicisiz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Iceland"
+msgstr "Д°slandiya"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Г‡ap edici adД± tЙ™kcЙ™ hЙ™rf, rЙ™qЙ™m vЙ™ alt xЙ™tt daxil edЙ™ bilЙ™r"
+msgid "stopped"
+msgstr "dayandД±rД±lД±b"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "Ağacı Aç"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
+"The old \"%s\" driver is blacklisted.\n"
 "\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
 "\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "Usta Modu"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Çap edici seçənəkləri"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS Verici"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+msgid "Australian Optus cable TV"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
+"  <Tab>/<Alt-Tab> irЙ™li/geri  |  <BoЕџluq> iЕџarЙ™tlЙ™  |  <F12> sonrakД± ekran"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+msgid "Subnet:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Çap edici seçənəkləri"
+msgid "Zimbabwe"
+msgstr "Zimbabve"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+msgid "Please enter the host name or IP."
+msgstr "Xahiş edirik siçanınızı seçin"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+msgid "When"
+msgstr "Г‡Й™rx"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "İkinci DNS Vericisi (arzuya görə)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "Finlandiya"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Arguments: (arg)\n"
 "\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "RЙ™ng dЙ™rinliyi: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsiniz. YenilЙ™nmЙ™lidir"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "DisketdЙ™n geri Г§aДџД±r"
+
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
+msgid "Slovenia"
+msgstr "Sloveniya"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
 msgstr ""
+"Bir istifadЙ™Г§i girin\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Г‡ap Edici BaДџlantД±sД±"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
+"Buradakı bir birindən fərqli seçənəklərə yenilərini əlavə edə bilər,\n"
+"ya da mövcud olanları dəyişdirə bilərsiniz."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
+"at Й™mri, zamanlanan Й™mrlЙ™ri iЕџlЙ™mЙ™lЙ™ri lazД±m gЙ™lЙ™n vaxtda iЕџlЙ™dir.\n"
+"Sistem yükü lazımi qədər alçaq olduğunda yığma əmrləri işlədilir."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"DГјz mГј iЕџlЙ™yir?"
+msgid "Installing SANE packages..."
+msgstr "%s paketi qurulur"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "açılış disketi yaradılması"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
 msgstr ""
-"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
-"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
-"Г‡ap vЙ™ziyyЙ™ti:\n"
-"%s\n"
-"\n"
-"DГјz mГј iЕџlЙ™yir?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, fuzzy, c-format
-msgid "Photo test page"
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
+msgid "Change type"
+msgstr "Bölmə növünü Dəyişdir"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "SILO Qurulumu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
 #, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Standart"
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"TЙ™briklЙ™r, quruluЕџ bitdi.\n"
+"Cdrom vЙ™ disketi Г§Д±xartdД±qtan sonra Enter'Й™ basaraq kompГјterinizi \n"
+"yenidЙ™n baЕџladД±n. Linuks Mandrake'nin bu buraxД±lД±ЕџД±ndakД± yamaqlar haqqД±nda \n"
+"mə'lumat almaq üçün http://www.mandrakelinux.com ünvanından Errata'ya "
+"baxД±n.\n"
+"Sisteminizin qurДџularД± haqqД±nda daha geniЕџ bilgiyi Linuks Mandrake \n"
+"Д°stifadЙ™Г§i KitabcД±ДџД±nda tapa bilЙ™rsiniz."
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Print"
-msgstr "Г‡ap Edici"
+msgid "paranoid"
+msgstr "ЕћГјbhЙ™ci"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "BЙ™li, hЙ™r iki sД±naq sЙ™hifЙ™sini dЙ™ Г§ap et"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "QapД±larД± sД±na"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Rezolyusiya"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Г‡ap edicini sД±namaq istЙ™yirsiniz?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
+"vericisinin\n"
+"IP ГјnvanД±, Г§ap edicinin paylaЕџdД±rma adД±, iЕџlЙ™mЙ™ grupu, istifadЙ™Г§i adД± vЙ™ \n"
+"parol verilmЙ™lidir."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "reconfigure"
+msgstr "yenidЙ™n quraЕџdД±r"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
+"Sizin kartД±nД±zД±n XFree %s ilЙ™ 3D dЙ™stЙ™yi ola bilЙ™r.\n"
+"DД°QQЖЏT! BU SINAQ MЖЏRHЖЏLЖЏSINDЖЏDIR VЖЏ KOMPГњTERД°NД°Z DONDURA BILЖЏR."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Г‡ap Edici BaДџlantД±sД±"
+msgid "Xinetd Service"
+msgstr "Г‡ap Edici Vericisi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10681,554 +10359,566 @@ msgstr ""
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Д°nternet qurДџularД±"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
+"aboot qurulumunda xata, \n"
+"ilk disk bölməsini yox etsə belə yenə də qurulmasını istəyirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Д°nternet qurДџularД±"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Növbəni sil"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"%s exists, delete?\n"
 "\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "NЙ™ cГјr bir Г§ap ediciniz var?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Xahiş edirik aşağıdakıları doldurun ya da seçin"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Г‡ap Edici BaДџlantД±sД±"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "Açılış Protokolu"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Uzaq Г‡ap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-disklЙ™ri %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "The model is correct"
-msgstr "DoДџrudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "The package %s is needed. Install it?"
 msgstr ""
+"Bu paket yenilЙ™nmЙ™lidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Uzaq Г‡ap Edici"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "Açılışda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Location"
-msgstr "Yeri"
+msgid "Bus identification"
+msgstr "TanД±tma"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Description"
-msgstr "Д°zah"
+msgid "Please make a backup of your data first"
+msgstr "ЖЏvvЙ™lcЙ™ datanД±zД±n yedЙ™yini alД±n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer"
-msgstr "Г‡ap edici adД±"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Yeri"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr ""
+"Sizin birdən çox diskiniz var, linux qurmaq üçün hansını istifadə "
+"edЙ™cЙ™ksiniz?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Enter Printer Name and Comments"
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+msgid "Eritrea"
+msgstr "Eritre"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Uzaq Г‡ap Edici"
+
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr ""
+msgid "Morocco"
+msgstr "MЙ™rakeЕџ"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "%s paketi qurulur"
+msgid "Which printer model do you have?"
+msgstr "NЙ™ cГјr bir Г§ap ediciniz var?"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "%s paketi qurulur"
+msgid "Add a new printer"
+msgstr "Г‡ap Edicisiz"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "          All of your selected data have been          "
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "%s paketi qurulur"
+msgid "<-- Delete"
+msgstr "Sil"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+msgid "Nepal"
+msgstr "Nepal"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "cpu # "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "A command line must be entered!"
+msgid "chunk size"
+msgstr "parça böyüklüyü"
+
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "commands before booting, or 'c' for a command-line."
 msgstr ""
+"acilisdan evvel emrleri duzeltmЙ™k ucun 'e', emr setiri ucun ise 'c' basin"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Command line"
-msgstr "SahЙ™(domain) adД±"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "Problems installing package %s"
+msgstr "%s paketi qurulurkЙ™n xЙ™ta oldu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Pipe into command"
+msgid "Add a scanner manually"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "%s tapД±ldД±"
+msgid "Reload partition table"
+msgstr "Bölmə cədvəlini qurtar"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "A valid URI must be entered!"
+msgid "Yes, I want autologin with this (user, desktop)"
 msgstr ""
+"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Device URI"
-msgstr "Г‡ap Edici avadanlД±ДџД± URI"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Search for fonts in installed list"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Port"
-msgstr "QapД±"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Г‡ap Edici Ev sahibi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Г‡ap Edici Ev sahibi"
+msgid "Boot"
+msgstr "Kök"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Soket çap edicidən yekun almaq üçün, çap edicinin ev sahibi  adını ve "
-"mümkünsə, qapısının nömrəsini verməlisiniz."
+msgid "Tuner type:"
+msgstr "Bölmə növünü Dəyişdir"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Soket Г‡ap Edici QurДџularД±"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "BaДџlantД±nД±z baЕџladД±lД±r..."
+msgid "Security Administrator:"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Please enter your login"
+msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
+"Heç İnternet bağlantınız yoxdur.\n"
+"ЖЏvvЙ™lcЙ™ onlarД±  'QuraЕџdД±r'a basaraq qurun"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Çap Edici Növbə Adı"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Printer Server"
-msgstr "Г‡ap Edici Vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
+msgid "Fonts copy"
 msgstr ""
-"NetWare çap edicidən yekun almaq üçün, NetWare vericisinin adı və çap "
-"edici \n"
-"növbəsi adı ilə istifadəçi adı va parolu verilməlidir."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "NetWare Г‡ap Edici QurДџularД±"
+msgid "Automated"
+msgstr "AvtomatlaЕџdД±rД±lmД±Еџ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "Paket seçkilərini saxla"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Loopback faylД± ЕџЙ™killЙ™ndirilir: %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Д°Еџ qrupu"
+msgid "use pptp"
+msgstr "pptpe istifadЙ™ et"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "PaylaЕџdД±rma adД±"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Açılışda avtomatik olaraq başlayacaq xidmətləri seçin"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "SMB verici IP"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "SMB verici adД±"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "ЕћЙ™bЙ™kЙ™ni qur"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Paketleri almaq üçün bir əks ünvanı seçin"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Bir SMB çap edicidən yekun almaq üçün, SMB kompüter adı, çap edici "
-"vericisinin\n"
-"IP ГјnvanД±, Г§ap edicinin paylaЕџdД±rma adД±, iЕџlЙ™mЙ™ grupu, istifadЙ™Г§i adД± vЙ™ \n"
-"parol verilmЙ™lidir."
+"FAT tədqiqatçımız sizin bölümləri işlədə bilmir,\n"
+"bu xЙ™ta oldu: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
+msgid "Which sector do you want to move it to?"
+msgstr "HansД± sektora daЕџД±maq istЙ™yirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
+msgid "Do you want to click on this button?"
+msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "UzaqdakД± ev sahibi adД±"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "UzaqdakД± ev sahibi adД±"
+msgid "Bahamas"
+msgstr "Bahama"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Manual configuration"
+msgstr "QuraЕџdД±rma"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "UzaqdakД± ev sahibi adД±"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr "axtar"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Uzaqdakı bir lpd çap edici növbəsini istifadə etmək üçün, \n"
-"çap edicinin bağlı olduğu çap edici vericisinin adını və növbə \n"
-"adД±nД±nД± vermЙ™lisiniz."
+"Bu paket /etc/sysconfig/keyboard'dakı seçili klaviatura düzülüşünü yüklər.\n"
+"Hansı klaviatura düzülüşü istifadə ediləcəyi kbdconfig ilə seçilir.\n"
+"Bu, mandrake qurulan bir Г§ox kompГјterdЙ™ fЙ™al buraxД±lmalД±dД±r."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "QuraЕџdД±rma"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+msgid "Xpmac (installation display driver)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
+"Syslog, bir Г§ox vasitЙ™nin ismarД±clarД±nД± mГјxtЙ™lif sistem qeydlЙ™rindЙ™\n"
+"tutmalarД±na imkan verЙ™r. Syslog'un hЙ™r zaman iЕџlЙ™mЙ™si\n"
+"yaxЕџД± fikirdir."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid "Unknown/Others"
+msgstr "Гњmumi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Seçənəklər"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "AЕџaДџД±dakД± paketlЙ™r sistemdЙ™n silinЙ™cЙ™klЙ™r"
+msgid "Auto-detected"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
+"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
+"baДџlantД±nД±zdan faydalana bilЙ™cЙ™klЙ™r.\n"
+"\n"
+"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
+"ehtiyacД±nД±z var."
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -11238,944 +10928,877 @@ msgid ""
 "name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "RЙ™dd Et"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
+"HardDrake texniki tЙ™'minat sД±naДџД± aparar vЙ™ onlarД± bir Г¶n quraЕџdД±rmadan "
+"keçirər."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Available printers"
-msgstr "Yerli Г‡ap Edici"
+msgid "Remote Printers"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Yerli Г‡ap Edici"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "%s faylД± yaradД±lД±r vЙ™ ЕџЙ™killЙ™ndirilir"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Yerli Г‡ap Edici"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Əlavə etmək üçün mövcud bir LVM seçin"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Г‡ap Edicisiz"
+msgid "xfs restart"
+msgstr "mЙ™hdudlaЕџdД±r"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Г‡ap Edici Ev sahibi"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "uyğun bölmə tapılmadı"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "%s tapД±ldД±"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "%s qapД±sД±nda tapД±ldД±"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "%s SisteminЙ™ XoЕџgЙ™lmiЕџsiniz"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "%s sГјrГјcГјsГјnЙ™ boЕџ bir disket yerlЙ™Еџdirin"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Г‡ap Edici"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"Bəzi hallarda, %s sürücü düzgün işləməsi üçün əlavə mə'lumat istəyə bilər.\n"
+"Sürücüler üçün əlavə bir xüsusiyyət göstərmək mi istəyərsiniz, yoxsa\n"
+"sürücülərin lazımi mə'lumatlar üçün avadalığı tanımasını mı istəyərsiniz? \n"
+"Bə'zən tanımlama kompüterinizi dondura bilər amma donduğu üçün\n"
+"kompüterinizə heç bir şey olmaz."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid " on "
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
+"\n"
+"%s\n"
+"\n"
+"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Г‡ap Edicini Qur"
+msgid "Cuba"
+msgstr "Kuba"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "Yerli Г‡ap Edici"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
+msgid "Belize"
+msgstr "Beliz"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Г‡ap edicini sД±namaq istЙ™yirsiniz?"
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "Çəkirdək Açılışı Vaxt Dolması"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"Sizin kartД±nД±zД±n 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™yi ola bilЙ™r, amma sadecЙ™ olaraq "
+"XFree %s\n"
+"ilЙ™ dГјzgГјn iЕџlЙ™yЙ™r.\n"
+"Sizin kartınıza XFree %s tərəfindən dəstək verilir ve bu 2D üçün daha yaxşı "
+"bir fikir olar."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "DrakX bölmə sehirbazı bu yolu tapdı:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "Macarca"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"İnternet xidmət vericinizi seçin.\n"
+"Siyahıda deyilsə Siyahıda deyil'i seçin."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+msgid "LDAP Server"
+msgstr "Verici"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"PCMCIA dЙ™stЙ™yi, laptoplarda eternet vЙ™ modem kimi avadanlД±qlarД±n "
+"dЙ™stЙ™klЙ™nmЙ™sinЙ™ imkan verЙ™r.\n"
+"Qurulmadığı vaxtda açılışda işləməz, işləməsinə ehtiyac olmayan\n"
+"kompГјterlЙ™rdЙ™ qurulu olmasД± problem yaratmaz."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Г‡ap Edicisiz"
+msgid "Choose your country"
+msgstr "Klaviaturanızı seçin"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Г‡ap Edicisiz"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+msgid "Standalone Tools"
+msgstr "Konsol VasitЙ™lЙ™ri"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "mЙ™hdudlaЕџdД±r"
+msgid "Where"
+msgstr "Г‡Й™rx"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "but not matching"
+msgstr "amma oxЕџamД±r"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "DoДџrudur?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Г‡ap Edici Ev sahibi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "PCMCIA kartlar qurulur..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "kdesu Й™ksikdir"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Uzaq CUPS vericisi"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Növbəni sil"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "%s tapД±ldД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Kristmas AdasД±"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Açılış yükləyicisi qurulumu iflas etdi. Xəta:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "bölmə %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "ЕћГјbhЙ™ci"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "NIS istifadЙ™ et"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
 msgstr "Yerli Г‡ap Edici"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Növbəni sil"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "BГјtГјn diski sil"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (ЖЏsas)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
 msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "ЕћЙ™bЙ™kЙ™ni qur"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "QurtardД±"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "CUPS verici IP"
+msgid "Turks and Caicos Islands"
+msgstr "TГјrk vЙ™ Kaykos AdalarД±"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Uzaq Г‡ap Edici"
+msgid "permissions"
+msgstr "bölmə %s"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "QuraЕџdД±rma"
+#, c-format
+msgid "<- Previous"
+msgstr "<- ЖЏvvЙ™lki"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Г‡ap Edici"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing configuration"
+msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Otaq vЙ™ grup sД±ralamasД± arasД±nda gЙ™z"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+msgid "Themes"
+msgstr "Г–rtГјklЙ™r"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Seçənəklər: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
+"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
 msgstr "Д°nternet qurДџularД±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr ""
+msgid "Saint Helena"
+msgstr "MГјqЙ™ddЙ™s Helena"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
-"Uzaq CUPS vericiləri üçün heç bir quraşdırmağa lüzüm yoxdur\n"
-"BuradakД± hЙ™r Г§ap edici avtomatik tapД±lacaqdД±r.\n"
-"Olmazsa \"Uzaq CUPS vericisi\" ni seçin."
+"Bə'zi bölmələr bitdi.\n"
+"\n"
+"HЙ™qiqЙ™tЙ™n dЙ™ Г§Д±xmaq istЙ™yirsiniz?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Г‡ap ediciniz nЙ™ ЕџЙ™kildЙ™ baДџlД±dД±r?"
+msgid "Sudan"
+msgstr "Sudan"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Çap Edici Bağlantısı Seçin"
+msgid "Polish (qwertz layout)"
+msgstr "Polyakca (QWERTZ sД±rasД±)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Syria"
+msgstr "Surinam"
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the user umask."
 msgstr ""
+"%s emeliyyat sistemi secki proqramina xos gЙ™lmissiniz!\n"
+"\n"
+"Içlerinden birini acmaq ucun adini yazin ve <ENTER>\n"
+"duymesine basin ve ya esas acilis ucun %d saniye gozleyin.\n"
+"\n"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "Portuqalca"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Loopback fayl adД±: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "serial"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Bu qovluq kök fayl sistemi içərisində olmalıdır"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Sistem yГјklЙ™yicini qur"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Ekran kartınızın yaddaş böyüklüyünü seçin"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM adД±?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "%s %s ara ГјzГј tapД±ldД±"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Qurulum"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Г‡ap Edicisiz"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Kart IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Açılış disketi yaratmaq üçün istifadə ediləcək disket sürücüyü seçin"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "MЙ™tn menyulu LILO"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "QurtardД±"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "ЖЏks ГјnvanД±na baДџlantД± qurulur"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Litvaniya dili AZERTY (köhnə)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Brazilya dili (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "SILO Qurulumu"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "MГјqЙ™ddЙ™s Vinsent vЙ™ Qrenadin"
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Fayl/_Aç"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Enable/Disable the logging of IPv4 strange packets."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Firmware Gecikməsini Aç"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Hungary"
+msgstr "MacarД±stan"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "QapД±larД± sД±na"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "QuraЕџdД±rma"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "New Zealand"
+msgstr "Yeni Zellandiya"
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "Xahiş edirik siçanınızın növünü seçin."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "Netherlands Antilles"
+msgstr "Holland AntillЙ™ri"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
 "\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Г‡ap Edicisiz"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Heç bir ISDN PCI kart tapılmaı. Sonrakı ekrandakılardan seçin."
 
-#: ../../security/help.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "XahiЕџ edirik bir istifadЙ™Г§i adД± alД±n"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "CDdən Açılışı Fəallaşdırım?"
 
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Normal modem tЙ™sbiti"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -12183,740 +11806,541 @@ msgstr ""
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "X verici üçün seçənəkləri göstərin"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Təhlükəsizlik səviyyəsini seçin"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "Qurulumu bitirmək üçün lazımi sahə yoxdur, xahiş edirik əlavə edin"
 
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Seçənəklər"
+msgid "%s on %s"
+msgstr "QapД±"
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
 msgstr ""
-"Biz dördüncü səviyyə haqlarını verdik və sistem xarici bağlantılara qarşı "
-"tamamilЙ™ qapalД±dД±r.\n"
-"TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™si indi Й™n ГјstdЙ™dir."
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"Bu tЙ™hlГјkЙ™sizlik sЙ™viyyЙ™siylЙ™ sistemin bir verici olaraq istifadЙ™si "
-"mГјmkГјndГјr.  \n"
-"TЙ™hlГјkЙ™sizlik, birdЙ™n Г§ox alД±cД±nД±n baДџlanmasД±na icazЙ™ verЙ™cЙ™k ЕџЙ™kildЙ™ "
-"artД±rД±lmД±ЕџdД±r. "
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Sisteminiz hansД± mЙ™qsЙ™dlЙ™ istifadЙ™ edilЙ™cЙ™k?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+msgid "Guinea"
+msgstr "Qvineya"
 
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
-msgstr ""
-"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
-"tЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sidir."
+msgid "The system is now connected to the Internet."
+msgstr "Д°nternetЙ™ artД±q baДџlД±sД±nД±z"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Cinubi Georgiya və Cənubi Sandviç Adası"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
 msgstr ""
-"Parollar fЙ™allaЕџdД±rД±ldД±, yenЙ™ dЙ™ bir ЕџЙ™bЙ™kЙ™ ГјstГјndЙ™ istifadЙ™ edilmЙ™mЙ™si "
-"tövsiyə edilir."
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
-msgstr ""
-"Bu səviyyə RAID'i diqqətli istifadənizi tövsiyə edirik. Sisteminiz daha "
-"asand\n"
-"iЕџlЙ™dilЙ™cЙ™k, ancaq xЙ™talara qarЕџД± da hЙ™ssaiyyЙ™ti dЙ™ artacaqdД±r. Д°nternetЙ™ \n"
-"bağlı isəniz bunu tövsiyə etmirik. Parol ilə girilir."
+msgid "Mozambique"
+msgstr "Mozambiq"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "ЕћГјbhЙ™ci"
+msgid "Icon"
+msgstr "Timsal"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Higher"
-msgstr "YГјksЙ™k"
+msgid "Please choose what you want to backup"
+msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
 
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "High"
-msgstr "YГјksЙ™k"
+msgid "256 colors (8 bits)"
+msgstr "256 rЙ™ng (8 bits)"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "ZЙ™if"
+msgid "Read-write"
+msgstr "Oxu-yaz"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "KrakerlЙ™rЙ™ xoЕџgЙ™lmiЕџsiniz"
+msgid "Size: %s\n"
+msgstr "Böyüklük: %s\n"
 
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "\"%s\"a(Й™) tЙ™krar girin vЙ™ dЙ™yiЕџikliklЙ™ri fЙ™allaЕџdД±rД±n"
+msgid "Hostname: "
+msgstr "Ev sahibi adД±:"
 
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "LГјtfen Г§Д±xД±n vЙ™ Ctrl-Alt-BackSpace dГјymЙ™lЙ™rinЙ™ basД±n"
+msgid "Chunk size %s\n"
+msgstr "Parça böyüklüyü %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Disket sГјrГјcГј yoxdur"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
+msgid "Error!"
+msgstr "XЙ™ta"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Write Config"
-msgstr "yenidЙ™n quraЕџdД±r"
+msgid "cable connection detected"
+msgstr "Kabel baДџlantД±sД±"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "/_Report Bug"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resize"
+msgstr "Böyüklüyünü Dəyişdir"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "Dominica"
+msgstr "Dominik"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "IP Range Start:"
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "SahЙ™(domain) adД±"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Rezolyusiya: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "matching"
+msgstr "oxЕџayД±r"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Routers:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Netmask"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Xahiş edirik doğru qapını seçin. Məsələn, MS Windowsdakı COM1'in qarşılığı\n"
+"Linuksda ttyS0'dД±r."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Subnet:"
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "AЕџaДџД±dakД± paketlЙ™r sistemdЙ™n silinЙ™cЙ™klЙ™r"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
 #, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+msgid "Connect to the Internet"
+msgstr "Д°nternetЙ™ baДџlan"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "QuraЕџdД±rД±lД±r..."
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Use existing partitions"
+msgstr "Var olan bölmələri işlədimmi"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP AlД±cД±sД±"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "FransД±zca (Kanada/Quebec)"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP AlД±cД±sД±"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "Siçan avadanlığı: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Add Client -->"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP AlД±cД±sД±"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP AlД±cД±sД±"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "type: %s"
-msgstr "Növ: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
 msgstr ""
+"\n"
+"BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
+"bilЙ™rsiniz."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
+msgid "MandrakeExpert Corporate"
+msgstr "Usta"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Fayl seç"
+msgid "Write protection"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Sil"
+msgid "You've not selected any font"
+msgstr "Növbəni sil"
 
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
 #, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "Language"
+msgstr "İşlətdiyiniz dili seçin"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "Г‡ap Edici BaДџlantД±sД±"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Build All Kernels -->"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
 msgstr ""
+"%s bölməsinin növünü dəyişdirdikdən sonra, bu bölmədəki bütün mə'lumatlar "
+"silinЙ™cЙ™kdir"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "BaДџlД± deyil"
+msgid "%d seconds"
+msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "%s sГјrГјcГјsГјnЙ™ boЕџ bir disket yerlЙ™Еџdirin"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No kernel selected!"
+msgid "A valid URI must be entered!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
+msgid "Found \"%s\" interface do you want to use it ?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Boot ISO"
+msgid "Re-configure interface and DHCP server"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Boot Floppy"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "Hazırkı disk bölmələndirməsi"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Enter Printer Name and Comments"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
+"The following printers\n"
 "\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+"%s%s\n"
+"are directly connected to your system"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
 #: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP AlД±cД±sД±"
+msgid "type: %s"
+msgstr "Növ: "
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Slovakca (QWERTY)"
+
+#: ../../standalone/draksound:1
 #, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
+msgid "No Sound Card detected!"
+msgstr "BaДџlД± deyil"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Mouse Port"
+msgstr "Siçan Qapısı"
 
 #: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
+msgid ""
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS Verici"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Start Server"
+msgid "Ftp Server"
 msgstr "NIS Verici"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Databeyz"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Д°nternet qurДџularД±"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Loopback faylД± ЕџЙ™killЙ™ndirilir: %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Qurulum"
-
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "TЙ™briklЙ™r!"
-
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+msgid "%s fonts conversion"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, c-format
-msgid "manual"
-msgstr ""
+msgid "Uganda"
+msgstr "Uqanda"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Arguments: (size)\n"
+"\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "replay"
-msgstr "TЙ™krarla"
-
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Qurulum sonrasД± qurДџular"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "XЙ™ta"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
 "\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
 "\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
+msgid "Comoros"
+msgstr "Komor"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
-"\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
-"\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
-"\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
 "\n"
+"Press OK to continue."
 msgstr ""
+"\n"
+"BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
+"bilЙ™rsiniz."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgid "Yaboot mode"
+msgstr "Yaboot modu"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Sıravi 3 Düyməli Siçan"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "Xahiş edirik siçanınızın növünü seçin."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "PaylaЕџdД±rma adД±"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12928,4596 +12352,5209 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
 " \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
+msgid "KB"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore"
-msgstr "Fayldan geri Г§aДџД±r"
+msgid "Network & Internet"
+msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Fayl sistemi qurДџularД±"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Litvanya dili \"Fonetik\" QWERTY"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "Sharing of local scanners"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr "XidmЙ™tlЙ™r vЙ™ vasitЙ™lЙ™r"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+msgid "Remote host name missing!"
+msgstr "UzaqdakД± ev sahibi adД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
+msgid "with /usr"
 msgstr ""
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Fayla qeyd et"
+msgid "Network"
+msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Zəif parol seçdiniz!"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Slovakca (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"  Transfer  \n"
+"Now"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
+msgid "Use daemon"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#, c-format
+msgid "Authentication"
+msgstr "TanД±tma"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
+msgid "Additional CUPS servers: "
+msgstr "CUPS verici IP"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
+msgid "Where do you want to mount %s?"
+msgstr "%s avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "AЕџaДџД±dakД± paketlЙ™r qurulacaqdД±r"
+msgid "Restore Via Network"
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Algeria"
+msgstr "ЖЏlcЙ™zair"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd böyüklüyü"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "SonrakД± ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- ЖЏvvЙ™lki"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Save"
-msgstr "Hal:"
+msgid "Setting Default Printer..."
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Ara Гњz %s (%s modulu iЕџlЙ™dilir)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Fayldan geri Г§aДџД±r"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "Ad: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Bölmə cədvəlini qurtar"
+msgid "Generating preview ..."
+msgstr "AvadanlД±qlar tanД±nД±r..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "serial"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "XГјsusi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "GГјrcГј dili (\"LatД±n\" sД±rasД±)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Fayldan geri Г§aДџД±r"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Kenya"
+msgstr "Kenya"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "ЖЏvvЙ™lcЙ™ ``AyД±r'-Д± iЕџlЙ™t"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Ev sahibi adД±:"
+msgid "Installing mtools packages..."
+msgstr "%s paketi qurulur"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Username required"
-msgstr "Д°stifadЙ™Г§i adД±"
+msgid "You must specify a root partition"
+msgstr "Bir swap sahЙ™sinЙ™ ehtiyacД±nД±z var"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Password required"
-msgstr "Parol"
+msgid "first step creation"
+msgstr "açılış disketi yaradılması"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Host Name"
-msgstr "Ev sahibi adД±"
+msgid "Select a scanner model"
+msgstr "Ekran kartınızı seçin"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Fayldan geri Г§aДџД±r"
+msgid "Drakbackup Configuration"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "FЙ™rqli qeyd et..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Bölmə cədvəlini qurtar"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Avtomatik GiriЕџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "DisketdЙ™n geri Г§aДџД±r"
+msgid "System configuration"
+msgstr "QuraЕџdД±rma"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
 msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Fayldan geri Г§aДџД±r"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Növbəni sil"
+msgid "Configuring printer ..."
+msgstr "Г‡ap Edicini Qur"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Fayldan geri Г§aДџД±r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Fayldan geri Г§aДџД±r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "Sistemi qur"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "DigЙ™r"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr "Virgin AdalarД± (Britaniya)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
+#: ../../lang.pm:1
+#, c-format
+msgid "Bermuda"
+msgstr "Bermuda"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "click here if you are sure."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "DisketdЙ™n geri Г§aДџД±r"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
-
-#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+"No configuration file found \n"
+"please click Wizard or Advanced."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Xahiş edirik siçanınızı seçin"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Yuxarıda sürücünüzdə tapılan Linuks bölmələri sıralanıb\n"
+"Sehirbazın tövsiyələrinə uyun, onlar çox vaxt işə yarayır.\n"
+"Əgər bunu istəməsəniz en azından kök bölməsi (\"/\") seçməlisiniz\n"
+"Çox kiçik bölmə seçməyin. yoxsa çox proqram tə'minatı yükləyə bilməzsəniz.\n"
+"Əgər verilərinizi başqa bölmədə tutmaq istəyirsinizsə, ondabir de \"/home\" "
+"bölməsi də yaratmalısınız (birdən çox Linuks\n"
+"bölməniz var isə).\n"
+"\n"
+"\n"
+"Xəbəriniz olsun, hər bölmə aşağıdakı kimi sıralanıb: \"Ad\", \"Həcm\".\n"
+"\n"
+"\n"
+"\"Ad\" belə kodlanıb: \"sürücü növü\", \"sürücü mömrəsi\",\n"
+"\"bölmə nömrəsi\" (məsələn \"hda1\").\n"
+"\n"
+"\n"
+"\"Sürücü növü\" əgər sürücünüz IDE sürücüdürsə \"hd\"dirvə SCSI sürücü isə "
+"\"sd\"dir.\n"
+"\n"
+"\n"
+"\"Sürücü nömrəsi\" həmişə \"hd\" və ya \"sd\"dən sonrakı rəqəmdir.IDE "
+"sürücülər üçün:\n"
+"\n"
+"*\"a\" yЙ™ni \"birinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
+"\n"
+"*\"b\" yəni \"birinci IDE idarəcisində kölə sürücü\",\n"
+"\n"
+"*\"c\" yЙ™ni \"ikinci IDE idarЙ™cisindЙ™ ali sГјrГјcГј\",\n"
+"\n"
+"*\"d\" yəni \"ikinci IDE idarəcisində kölə sürücü\".\n"
+"\n"
+"\n"
+"SCSI sГјrГјcГјlЙ™rindЙ™ \"a\" nД±n mЙ™nasД± \"birinci sГјrГјcГј\",\n"
+"\"b\"nin mЙ™nasД± \"ikinci sГјrГјcГј\"dГјr vs..."
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "Xahiş edirik siçanınızın növünü seçin."
+msgid "Remove"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Lesotho"
+msgstr "Lesoto"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "utopia 25"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "OK to restore the other files."
+msgid "Pipe job into a command"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
-
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
+msgid "Yes"
+msgstr "BЙ™li"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "Cote d'Ivoire"
+msgstr "Kot Divuar"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "HansД± protokolu istifadЙ™ etmЙ™k istЙ™yirsiniz?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+msgid "Restore Progress"
+msgstr "Fayldan geri Г§aДџД±r"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Estonia"
+msgstr "Estoniya"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
+"Bölmə cədvəlinizdə bir boşluq var, amma o da işlədilə bilməz.\n"
+"Bu boşluğu, birinci bölmənizi en yaxınındakı genişlədilmiş bölməyə "
+"daЕџД±yaraq\n"
+"mЙ™sЙ™lЙ™ni hЙ™ll edЙ™ bilЙ™rsiniz."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "LЙ™Дџv et"
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Add"
+msgstr "ЖЏlavЙ™ et"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
 
 #: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "%s faylД± oxunurkan xЙ™ta oldu"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Klaviatura"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "İstifadə edəcəyiniz vasitəni seçin"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Tape \n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "%s ЕџЙ™bЙ™kЙ™ avadanlД±ДџД± qurulur"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "FЙ™al"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "GГјncЙ™llЙ™nЙ™cЙ™k paketlar tapД±lД±r"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Bağlama nöqtəsi: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "With X"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Г‡oxlu BaЕџlД±q quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Seçənəklər"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Save via %s on host: %s\n"
+"%s"
 msgstr ""
+"Mövcud qurğuları saxlayım?\n"
+"Hal-hazД±rkД± qurДџular:\n"
+"\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "32MB dən kiçik disk bölmələrində ReiserFS istifadə etməlisiniz"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
+"rwho protokolu, uzaq istifadЙ™Г§ilЙ™rin, rwho vasitЙ™si iЕџlЙ™dЙ™n bir kompГјterdЙ™\n"
+"olan bütün istifadəçiləri görmələrina imkan verər."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "SahЙ™(domain) adД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Siçan avadanlığı: %s\n"
+msgid "Sharing of local printers"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Yerli Г‡ap Edici"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "BoЕџ"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "%s avadanlД±ДџД±nД± haraya baДџlamaq istЙ™yirsiniz?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Ara Гјz %s"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 dГјymЙ™"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "Select user manually"
+msgid "Test"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup system"
-msgstr "Fayl sistemi qurДџularД±"
+msgid "Korea"
+msgstr "Daha Г‡ox"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+msgid "Your choice? (default `%s'%s) "
+msgstr "Seçkiniz? (əsas %s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "Г‡ap Edicisiz"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "on Tape Device"
+msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "Geri al"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "Ara Гјz %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Siçan qurğuları"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Bağlama nöqtələrini seçin"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "Oldu"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "More Options"
-msgstr "Modul seçənəkləri:"
+msgid "Yugoslavian (latin)"
+msgstr "Yugoslavca (latД±n/kiril)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Qurulur"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "When"
-msgstr "Г‡Й™rx"
+msgid "Is this an install or an upgrade?"
+msgstr "Bu bir qurulum mu, yoxsa gГјncЙ™llЙ™mЙ™midir?"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Where"
-msgstr "Г‡Й™rx"
+msgid "ISDN card"
+msgstr "Daxili ISDN kart"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "What"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
+"TЙ™brik edirik, internet vЙ™ ЕџЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД± qurtardД±.\n"
+"\n"
+"QurДџular indi sisteminizЙ™ Й™lavЙ™ edilЙ™cЙ™k.\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Send mail report after each backup to:"
+msgid "\t-Hard drive.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Xahiş edirik istifadə üçün bir dil seçin."
+msgid "Printer on remote CUPS server"
+msgstr "Uzaq CUPS vericisi"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Д°stifadЙ™Г§i adД±"
+msgid "delete"
+msgstr "Sil"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "monthly"
+msgid "here if no."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Ev sahibi adД±"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "weekly"
+msgid "The maximum lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "daily"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "hourly"
+msgid "Did it work properly?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "HardDrive / NFS"
-msgstr ""
+msgid "Poor"
+msgstr "ZЙ™if"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "CDROM / DVDROM"
+msgid "The DHCP start range"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Xahiş edirik siçanınızı seçin"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr "Qrenada"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "E'tibarsД±z"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s sektor"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "Xeyr"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Fayl seç"
+#: ../../lang.pm:1
+#, c-format
+msgid "Guadeloupe"
+msgstr "Quadelup"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "could not find any font.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Ећaquli yenilЙ™mЙ™ sГјr'Й™ti"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
 #, c-format
-msgid " Erase Now "
-msgstr ""
+msgid "Entering step `%s'\n"
+msgstr "BaЕџlanДџД±c addД±mД± `%s'\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+msgid "Removing %s ..."
+msgstr "Rezolyusiya: %s\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Niger"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No printer"
+msgstr "Г‡ap Edicisiz"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Klaviatura quruluşunu seçiniz."
+msgid "alert configuration"
+msgstr "QuraЕџdД±rma"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "NetWare Printer Options"
+msgstr "NetWare Г‡ap Edici QurДџularД±"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "General"
+msgstr "Гњmumi"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Need hostname, username and password!"
+msgid "Add a user"
+msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД± (%d adapter)"
+
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, c-format
+msgid "Mandatory package %s is missing"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Parolsuz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Philippines"
+msgstr "Filippin"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Oldu"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Çap Edici Növbə Adı"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "aboot istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusca"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Xahiş edirik siçanınızı seçin"
+msgid "Move files to the new partition"
+msgstr "Yeni bölmələr üçün boş sahə yoxdur"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "Bölmə cədvəlini qurtar"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Pitkairn"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Д°Еџ qrupu"
+
+#: ../../fs.pm:1
 #, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Д°stifadЙ™Г§i adД±"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "Qrafiki menyulu LILO"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "\"Windows\"u sil"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "TЙ™xmini olaraq hesaplanД±r"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsД±nД±z. ArtД±q qurulmuЕџdur."
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Növbəni sil"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "YenЙ™ dЙ™ davam edЙ™k?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Xahiş edirik qurmaq istədiyiniz paketləri seçin."
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Mövcud olan paketlər axtarılır."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Seçənəkləri göstər"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+msgid "Vanuatu"
+msgstr "Vanuatu"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"Xüsusi bir açılış disketi, Linuks sisteminizin normal bir sistem yükləyiciyə "
+"lГјzГјm\n"
+"olmadan açılmasına imkan verər. Əgə sisteminizə lilo (ya da grub) "
+"qurmayacaqsanД±z,\n"
+"ya da baЕџqa bir Й™mЙ™liyyat sistemi liloyu silЙ™rsa ya da lilo "
+"avadanlД±ДџД±nД±zlaiЕџlЙ™mЙ™zsЙ™\n"
+"bu disket sizə yardımçi olacaqdır. Sonradan Mandrake qurtarma disketi "
+"rЙ™smini\n"
+"istifadЙ™ edЙ™rЙ™k dЙ™ bu disket yaradД±la bilЙ™r.\n"
+"Açılış disketi yaratmaq istəyirsiniz?\n"
+"Açılış disketi yaratmaq istəyirsinizsə, birinci disket sürücüyə disket "
+"yerlЙ™Еџdirin\n"
+"vЙ™ \"OLDU\" basД±n."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
-msgstr ""
+msgid "Norfolk Island"
+msgstr "Norfolk AdalarД±"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "File Selection"
-msgstr "Paket Qrup Seçkisi"
+msgid "Theme installation failed!"
+msgstr "Quruluş sinifini seçin"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "%s faylД± oxunurkan xЙ™ta oldu"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Loopback üçün istifadə et"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "pppoe istifadЙ™ et"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Yeni bölmələr üçün boş sahə yoxdur"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "SINAQ MЖЏRHЖЏLЖЏSД°NDЖЏKД° 3D sГјr'Й™tlЙ™ndirmЙ™ dЙ™stЙ™kli XFree %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "ЖЏtraflД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+msgid "More Options"
+msgstr "Modul seçənəkləri:"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Afghanistan"
+msgstr "ЖЏfqanД±stan"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron, istifadЙ™Г§ilЙ™rЙ™ xГјsusi Й™mrlЙ™ri periodik olaraq iЕџЙ™ sala bilЙ™n\n"
+"standart bir UNIX proqramД±dД±r. vixie cron, standart cron'a Й™lavЙ™ edilmiЕџ bir "
+"Г§ox\n"
+"yeni xГјsusiyyЙ™t daxildir."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No tape in %s!"
-msgstr ""
+msgid "Burundi"
+msgstr "Burundi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "DiqqЙ™tlЙ™ Oxuyun!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not erasable media!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "QapД±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "QapД±larД± sД±na"
-
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Sistemi secili emeliyyat sistemiyle acmaq ucun entere,"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s not responding"
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "%s açıla bilmir: %s\n"
+msgid "The encryption keys do not match"
+msgstr "Parollar uyДџun gЙ™lmir"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Parolsuz"
-
-#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
+msgid "Resolutions"
+msgstr "Rezolyusiyalar"
+
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
 msgid ""
+"drakfirewall configurator\n"
 "\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
+"tinyfirewall configurator\n"
+"\n"
+"Bu, Linuks Mandrake sisteminiz üçün şəxsi bir firewall quraşdıracaqdır.\n"
+"Daha güclü və e'tibarlı sistem üçün xahiş edirik xüsusi MandrakeSecurity "
+"Firewall\n"
+"buraxД±lД±ЕџД±nД± tЙ™dqiq edin."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Növbəni sil"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+msgid "Network configuration"
+msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "CUPS baЕџlayД±r"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "INFO"
+msgid "TB"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid "FATAL"
 msgstr "FAT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "Sil"
 
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "%s qurulumu iflas etdi. Olan xЙ™ta:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Xeyr, Avtomatik giriЕџ istЙ™mirЙ™m"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Kompüterinizi avtomatik olaraq X ilə açılması üçün qura bilərəm.\n"
+"Açılışda X Window ilə başlamaq istəyirsiniz?"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr ""
-"Bəli, bu istifadəçi üçün avtomatik giriş istəyirəm (istifadəçi, masa üstü)"
+msgid "Build the disk"
+msgstr "Diski yarat"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "BaДџlantД±nД± kЙ™s"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Açılışda X-Window sistemini başlat"
+msgid "Status:"
+msgstr "Hal:"
 
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "System mode"
-msgstr "Sistem modu"
+msgid "HTTP proxy"
+msgstr "HTTP vЙ™kil verici"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS Verici"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Açılış Protokolu"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "XЙ™ta"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Themes"
-msgstr "Г–rtГјklЙ™r"
+msgid "allow \"su\""
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Australia"
+msgstr "serial"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+msgid "please wait during ttmkfdir..."
 msgstr ""
-"Açılış İdarəçisi olaraq hazırda %s işlədirsiniz.\n"
-"Quraşdırma sehirbazını başlatmaq üçün tıqlayın."
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Configure only card \"%s\"%s"
+msgstr "TЙ™kcЙ™ \"%s\" kartД±nД± qur (%s)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Quruluş sinifini seçin"
+msgid "Level"
+msgstr "sЙ™viyyЙ™"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Notice"
-msgstr "NoVД°deo"
+msgid "Change the printing system"
+msgstr "ЕћЙ™bЙ™kЙ™ni qur"
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
+"Sizin sisteminiz Г§oxlu baЕџlД±q quraЕџdД±rmasД±nД± dЙ™stЙ™klЙ™yir.\n"
+"NЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
+msgid "Configure services"
+msgstr "XidmЙ™tlЙ™ri qur"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "mount failed: "
+msgstr "baДџlama iflas etdi: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Image"
+msgstr "ЖЏks"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lilo message not found"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Copy %s to %s"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
 
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Yeni bölmə yarat"
+msgid "Selected All"
+msgstr "Fayl seç"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Install themes"
-msgstr "Sistemi qur"
+msgid "Webmin Service"
+msgstr "avadanlД±q"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Lilo/grub modu"
+msgid "device"
+msgstr "avadanlД±q"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Yaboot modu"
+msgid "All"
+msgstr "HamД±sД±"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "HansД± Г§ap edici sistemini istifadЙ™ etmЙ™k istЙ™yirsiniz?"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "Yunanca"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "An error occurred"
+msgstr "Bir xЙ™ta oldu"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Fayl/_Г‡Д±x"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Bu paket yenilЙ™nmЙ™lidir\n"
+"Sistemdən çıxarmaq mövzusunda ciddisiniz?"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "ErmenicЙ™ (yazД± maЕџД±nД±)"
+
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "/_File"
-msgstr "/_Fayl"
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Qurulumdan sonra istifadə edə biləcəyiniz başqa dillər seçə bilərsiniz"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"%s avadanlД±ДџД±nda medya yoxdur.\n"
+"XahiЕџ edirik. birini taxД±n."
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Qurulumdan Г§Д±x"
+msgid "Printer on NetWare server"
+msgstr "Г‡ap Edici Vericisi"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "YaddaЕџ miqdarД±nД± Mb cinsindЙ™n verin"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "HЙ™qiqi adД±"
+
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Not installed"
-msgstr "Qurulumdan Г§Д±x"
+msgid "done"
+msgstr "QurtardД±"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Konsol VasitЙ™lЙ™ri"
+msgid "Please uncheck or remove it on next time."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Report"
-msgstr "QapД±"
+msgid "Higher"
+msgstr "YГјksЙ™k"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
 "\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Release: "
-msgstr "Xahiş edirik gözləyin"
+msgid "Can't find %s on %s"
+msgstr "%s açıla bilmir: %s\n"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Paket Qrup Seçkisi"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "TanД±tma"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД± SehirbazД±"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Г‡ap Edici"
+msgid "Japanese 106 keys"
+msgstr "Yaponca 106 dГјymЙ™li"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Windows Migration tool"
+msgid "This will take a few minutes."
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Urpmi"
+msgid "Burkina Faso"
+msgstr "Burkina Faso"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use scanners on remote computers"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Software Manager"
-msgstr "PaylaЕџdД±rma adД±"
+msgid "Delete selected rule"
+msgstr "Növbəni sil"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Uzaq Г‡ap Edici"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Uzaq CUPS vericisi"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Msec"
-msgstr "Siçan"
+msgid "Insert a floppy in %s"
+msgstr "%s sГјrГјcГјsГјnЙ™ bir disket taxД±n"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "Usta"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr "Maldiv"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Д°darЙ™ MЙ™rkЙ™zi"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "bЙ™sit"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "HardDrake"
+msgid "1 minute"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "%d data yolunda, %d nö'li\n"
+
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
 msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Д°lk DЙ™fЙ™ SehirbazД±na XoЕџ GЙ™ldiniz"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Д°darЙ™ MЙ™rkЙ™zi"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "FAT bölməsi yoxdur ya da loopback üçün lazımi yer buraxılmayıb"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr "ParametrlЙ™r"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Firewall"
+msgstr "Verici, Firewall/Ruter"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Д°nternet BaДџlantД±sД± QuraЕџdД±rД±lmasД±"
+msgid "Area:"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP AlД±cД±sД±"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Eternet KartД±"
+msgid "Printer Server"
+msgstr "Г‡ap Edici Vericisi"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "Keçit"
+msgid "Disconnection from the Internet complete."
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "Bağlantı növü:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "QuraЕџdД±rma"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Profil: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Д°nternet baДџlantД±sД± quraЕџdД±rД±lmasД±"
+msgid "Saint Pierre and Miquelon"
+msgstr "MГјqЙ™ddЙ™s Pyer vЙ™ Migelion"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
-"Heç İnternet bağlantınız yoxdur.\n"
-"ЖЏvvЙ™lcЙ™ onlarД±  'QuraЕџdД±r'a basaraq qurun"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "FЙ™al"
+#: ../../lang.pm:1
+#, c-format
+msgid "Portugal"
+msgstr "Portuqaliya"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "BaЕџqa var?"
+
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "deactivate now"
-msgstr "FЙ™al"
+msgid ", printing to %s"
+msgstr "%s faylД±na yazarkЙ™n xЙ™ta oldu"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP alД±cД±sД±"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Xahiş edirik siçanınızı seçin"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "Açılışda başladılır"
+msgid "Toggle to normal mode"
+msgstr "Normal moda keç"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Açılış Protokolu"
+msgid "Generic"
+msgstr "Гњmumi"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "%s Adapteri: %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "Silindr %d -dЙ™n silindr %d-yЙ™\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "New profile..."
+msgstr "Yeni profil..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+msgid "Which disk do you want to move it to?"
+msgstr "HansД± diskЙ™ daЕџД±maq istЙ™yirsiniz?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
 msgstr ""
-"Qurulu ara ГјzГјnГјz yoxdure.\n"
-"ЖЏvvЙ™lcЙ™ onlarД±  'QuraЕџdД±r'a basaraq qurun"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "BaДџlan..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "NIS sahЙ™si"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "BaДџlantД±nД± KЙ™s..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Ara Гњz %s (%s modulu iЕџlЙ™dilir)"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "BaДџlД± deyil"
+msgid "INFO"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connected"
-msgstr "BaДџlandД±"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Wallis and Futuna"
+msgstr "Vallis vЙ™ Futuna AdalarД±"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Interface:"
-msgstr "Ara Гјz"
+msgid "Is FPU present"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway:"
-msgstr "Keçit:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Apply"
-msgstr "ЖЏlavЙ™ Et"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"Bu xidmЙ™t haqqД±nda tЙ™Й™sГјf ki,\n"
+"Й™lavЙ™ mЙ™'lumat yoxdur."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Sehirbaz..."
+msgid "Is this correct?"
+msgstr "DoДџrudur?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Status:"
-msgstr "Hal:"
+msgid "Marshall Islands"
+msgstr "MarЕџal AdalarД±"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "\"Windows\"u sil"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Type:"
-msgstr "Növ: "
+msgid "Root password"
+msgstr "Root parolunu qur"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Internet access"
-msgstr "Д°nternet imkanД±"
+msgid "Build All Kernels -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "Ev sahibi adД±:"
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ni QuraЕџdД±r..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Bir swap sahЙ™niz yoxdur\n"
+"Davam edim?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "State"
-msgstr "Hal:"
+msgid "Server IP missing!"
+msgstr "Г‡ap Edici Ev sahibi"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Driver"
-msgstr "SГјrГјcГј"
+msgid "Suriname"
+msgstr "Surinam"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protokol"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "CDdən Açılışı Fəallaşdırım?"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Ara Гјz"
+msgid "Graphical Environment"
+msgstr "Qrafiki Ara Гњz"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "İnternet keçişini Qur..."
+msgid "Gibraltar"
+msgstr "Gibraltar"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wait please"
+msgid "on Tape Device"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "amma oxЕџamД±r"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "Yeni profil..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP AlД±cД±sД±"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "SilinЙ™cЙ™k profil:"
+msgid "Filesystem type: "
+msgstr "Fayl sistemi növü: "
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Del profile..."
-msgstr "Profili sil..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "BaДџlantД±nД±z baЕџladД±lД±r..."
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД± (%d adapter)"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vietnam"
+msgstr "Vyetnam"
 
-#: ../../standalone/drakedm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "Д°zah"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "Optimize your security by using Mandrake Linux"
 msgstr ""
 
-#: ../../standalone/drakedm:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr ""
+msgid "Help"
+msgstr "YardД±m"
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-"DГјzgГјn mkbootdisk aparД±la bilmir: \n"
-" %s \n"
-" %s"
+msgid "Your personal phone number"
+msgstr "Sizin şəxsi telefon nömrəniz"
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "Fork edilЙ™ bilmir: %s"
+msgid "Which size do you want to keep for Windows on"
+msgstr "HansД± sektora daЕџД±maq istЙ™yirsiniz?"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
-"%s avadanlД±ДџД±nda medya yoxdur.\n"
-"XahiЕџ edirik. birini taxД±n."
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "%s avadanlД±ДџД±nda medya olduДџundan Й™min olun"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Build the disk"
-msgstr "Diski yarat"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr "NЙ™ticЙ™"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Remove a module"
-msgstr "Modulu Г§Д±xart"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Add a module"
-msgstr "Modul Й™lavЙ™ et"
+"Sınaq səhifəsi çap edici vasitəsinə göndərildi.\n"
+"Çap edicinin işləməsi üçün bir az vaxt keçər.\n"
+"DГјz mГј iЕџlЙ™yir?"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "omit scsi modules"
-msgstr "scsi modulları keç"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "Д°stifadЙ™Г§i adД±"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
-msgid "if needed"
-msgstr "lazД±m olarsa"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "raid modulları keç"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "SMB (Windows 9x/NT) Çap Edici Seçənəkləri"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "force"
-msgstr "zorla"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
 
 #: ../../standalone/drakfloppy:1
 #, c-format
 msgid "mkinitrd optional arguments"
 msgstr "mkinitrdin arzuya baДџlД± olan arqumentlЙ™ri"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Expert Area"
-msgstr "UstalarД±n SahЙ™si"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "kernel version"
-msgstr "Г§Й™yirdЙ™k buraxД±lД±ЕџД±"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "BГјtГјn dГјnya"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "Й™sas"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "General"
-msgstr "Гњmumi"
+msgid "64 MB or more"
+msgstr "64 MB vЙ™ ya daha Г§ox"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "açılış disketi yaradılması"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Please select the device where your %s is attached"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Size"
-msgstr "Böyüklük"
+msgid "Not formatted\n"
+msgstr "ЕћЙ™killЙ™ndirilmЙ™miЕџ\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Module name"
-msgstr "Modul adД±"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Qurulumdan Г§Д±x"
+msgid "Periodic Checks"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+msgid "PXE Server Configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Initial tests"
-msgstr "Д°nit Д°smarД±cД±"
+msgid "Backup the system files before:"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Post Install"
-msgstr "Qurulum"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"İnternetə bağlı bir kompüter üçün standart və tövsiyə edilən bir "
+"tЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sidir."
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "First floppy drive"
+msgstr "Д°lk disket sГјrГјcГј"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_Quit"
+msgstr "/Fayl/_Г‡Д±x"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "Uzaq Г‡ap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Selected All"
-msgstr "Fayl seç"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Yeni böyüklük seçin"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Unselected All"
+msgid "Media class"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "here if no."
+msgid "The %s is not known by this version of Scannerdrake."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "click here if you are sure."
-msgstr ""
+msgid "Faroe Islands"
+msgstr "Faro AdalarД±"
 
 #: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Install List"
-msgstr "Sistemi qur"
+msgid "Restart XFS"
+msgstr "mЙ™hdudlaЕџdД±r"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "Add host/network"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Г‡ap Edici"
+msgid "Please enter the directory to save to:"
+msgstr "Xahiş edirik siçanınızı seçin"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Abiword"
-msgstr "DayandД±r"
+msgid "Model name"
+msgstr "Modul adД±"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "Д°Еџ Yeri"
+#: ../../lang.pm:1
+#, c-format
+msgid "Albania"
+msgstr "Albaniya"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ghostscript"
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Britaniya Hind OkeanД± SahЙ™si"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Normal Mode"
+msgstr "Normal Mod"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "About"
-msgstr "DayandД±r"
+msgid "Printer connection type"
+msgstr "İnternet Bağlantısı Bölüşdürülməsi"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "Bağlama nöqtəsi"
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#, c-format
+msgid "No network adapter on your system!"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "Network %s"
+msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Uninstall Fonts"
+msgid "Malayalam"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Get Windows Fonts"
+msgid "Option %s out of range!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Bölmə şəkilləndirilməsi"
+msgid "Connect %s"
+msgstr "BaДџlan"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "done"
-msgstr "QurtardД±"
+msgid "Restarting CUPS..."
+msgstr "mЙ™hdudlaЕџdД±r"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "xfs restart"
-msgstr "mЙ™hdudlaЕџdД±r"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "mЙ™hdudlaЕџdД±r"
+msgid "Duplicate mount point %s"
+msgstr "%s bağlama nöqtəsini çoxalt"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
+msgid "if set to yes, run chkrootkit checks."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "BaДџlantД± quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Unknown|Generic"
+msgstr "Гњmumi"
+
+#: ../../help.pm:1
 #, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Quit"
+msgstr "Г‡Д±x"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Myanmar"
+msgstr "Myanmar"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Avtomatik ayД±r"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Check bad blocks?"
+msgstr "XЙ™talД± bloklar sД±nansД±nmД±?"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Other MultiMedia devices"
+msgstr "DigЙ™r"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "Uzaq Г‡ap Edici"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Qurulum hazД±rlanД±r"
+msgid "Authentication NIS"
+msgstr "NIS"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Fonts copy"
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
 msgstr ""
+"``Əmr sətiri seçənəklərini məhdudlaşdır`` seçənəyi parolsuz bir işə yaramaz"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Kart IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "BirlЙ™ЕџmiЕџ ЖЏrЙ™b ЖЏmirliklЙ™ri"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Card IO_1"
+msgstr "Kart IO_1"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Thailand"
+msgstr "Tayland"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "parse all fonts"
+msgid "Routers:"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Qazaxstan"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
+msgid "Display all available remote CUPS printers"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"İnternet Bağlantısı Bölüşdürmə vasitəsinə Xoş Gəldiniz!\n"
-"\n"
-"%s\n"
-"\n"
-"Quraşdırma sehirbazını açmaq üçün Quraşdıra tıqlayın."
+msgid "Mandrake Linux Installation %s"
+msgstr "Linuks-Mandrake Qurulumu %s"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "İnternet bağlantısı bölüşdürülməsi quraşdırılması"
+msgid "Thai keyboard"
+msgstr "Thai klaviatura"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "İnternet Bağlantısı Bölüşdürmə Quraşdırması aparılmayıb."
+msgid "Dialup options"
+msgstr "Çevirməli şəbəkə seçənəkləri"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "QuraЕџdД±rma artД±q qurtarД±bdД±r vЙ™ fЙ™aliyyЙ™tdЙ™dir."
+msgid "Bouvet Island"
+msgstr "Buvet AdasД±"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "QuraЕџdД±rma artД±q qurtarД±bdД±r, amma fЙ™aliyyЙ™ti dayandД±rД±lД±b."
+msgid "If no port is given, 631 will be taken as default."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"HЙ™r Еџey quruldu.\n"
-"Д°ndi isЙ™ Д°nternet baДџlantД±nД±zД± yerli ЕџЙ™bЙ™kЙ™dЙ™kД± baЕџqa kompГјterlЙ™r ilЙ™ "
-"bölüşdürə bilərsiniz, bunun üçün isə avtomatik şəbəkə quraşdırılması (DHCP) "
-"iЕџlЙ™dilir."
+"Cd-Romu dЙ™yiЕџdirin!\n"
+"\n"
+"\"%s\" adlД± Cd-Romu sГјrГјcГјnГјzЙ™ taxД±n vЙ™ OLDU'ya basД±n.\n"
+"Əgər Cd-Rom əlinizdə deyilsə bu Cd-Rom'dan qurmamaq üçün İMTİNA ET'ə basın."
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "%s paketi qurulurkЙ™n xЙ™ta oldu"
+msgid "Polish"
+msgstr "Polyakca"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "SkriptlЙ™ qurulur, proqram tЙ™'minatД± qurulur, xidmЙ™tlЙ™r baЕџladД±lД±r..."
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Д°darЙ™ MЙ™rkЙ™zi"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configuring..."
-msgstr "QuraЕџdД±rД±lД±r..."
+msgid "\t-Network by webdav.\n"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "%s quДџusunda dЙ™yЙ™sЙ™n bir LAN Гјnvan Г§axД±ЕџmasД± tapД±ldД±!\n"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr ""
+"SisteminizdЙ™ ЕџЙ™bЙ™kЙ™ kartД± tapД±la bilmЙ™yib.AvadanlД±ДџД± quran vasitЙ™ni iЕџЙ™ "
+"salД±n."
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "Netmask"
+msgstr "Netmask"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "Yerli Г‡ap Edici"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "2 buttons"
+msgstr "2 dГјymЙ™li"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "ISDN bağlantınızın növü nədir?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Label"
+msgstr "Etiket"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The DHCP start range"
-msgstr ""
+msgid "Save on floppy"
+msgstr "DisketЙ™ qeyd et"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Г‡ap Edicisiz"
+msgid "Printer auto-detection"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "CUPS verici IP"
+msgid "Which of the following is your ISDN card?"
+msgstr "HansД±sД± sizin ISDN kartД±nД±zdД±r?"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
+msgstr ""
+"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir "
+"protokoldur.\n"
+"Bu xidmЙ™t, /etc/exports faylД±nda qurДџularД± olan NFS vericisinin\n"
+"istifadЙ™sinЙ™ imkan verЙ™r."
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "CUPS verici IP"
+msgid "Msec"
+msgstr "Siçan"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+"=> Notice, a label changed:\n"
+"%s"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "ЕџЙ™bЙ™kЙ™ kartД± tapД±lmadД±"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Seçkiniz? (əsas %s) "
 
-#: ../../standalone/drakgw:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
 "\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
+"Yeni yaradılan bütün bölmələr şəkilləndirilməlidir\n"
+"(ЕџЙ™killЙ™ndirmЙ™k yЙ™ni fayl sistemi yaratmaq - format).\n"
+"\n"
+"\n"
+"Bu arada var olan hazır bölmələri də üstündəkiləri silmək üçünyenidən "
+"ЕџЙ™killЙ™ndirmЙ™k istЙ™ya\n"
+"bilЙ™rsiniz.\n"
+"Bunu istəyirsinizsə bu bölmələri də seçməlisiniz.\n"
+"\n"
+"\n"
+"Bunu ağlınızda tutun ki var olan bütün bölmələri şəkilləndirmək\n"
+"mЙ™cburi deyil.\n"
+"İşlətim sistəmini əmələ gətirən bölmələri (yəni\n"
+"\"/\", \"usr\" və ya \"var\"ı yenidən şəkilləndirmək üçün\n"
+"seçə bilərsiniz. Verilər olan \"home\"u məsələ toxunulmadan\n"
+"buraxa bilЙ™rsiniz.\n"
+"\n"
+"\n"
+"Diqqətli olun. şəkilləndirdiyiniz bölmələrdəki verilər\n"
+"geri gЙ™lmЙ™z.\n"
+"\n"
+"\n"
+"ЕћЙ™killЙ™ndirmЙ™yЙ™ hazД±r isЙ™niz \"Oldu\" dГјymЙ™sini tД±qlayД±n.\n"
+"\n"
+"\n"
+"Yeni Linuks Mandrake sisteminizi qurmaq üçün başqa bölmə seçmək\n"
+"istЙ™yirsiniz isЙ™ \"LЙ™Дџv et\" dГјymЙ™sinЙ™ basД±n."
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "FransД±zca"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "Г‡ex dili (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "%s qapД±sД±nda tapД±ldД±"
 
 #: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Г‡ap Edici Vericisi"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "MГјndЙ™ricat"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Д°nternet qurДџularД±"
+msgid "Next"
+msgstr "SonrakД± ->"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Д°nternet qurДџularД±"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Sistem yГјklЙ™yicisini haraya qurmaq istЙ™yirsiniz?"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
+msgid "CHAP"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Monitor qurulmayД±b"
+#: ../../lang.pm:1
+#, c-format
+msgid "Puerto Rico"
+msgstr "Porto Riko"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "Sizi Yerli Şəbəkəyə bağlayacaq adapteri seçin"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Litvanya dili \"number row\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"SistemnizdЙ™ bir dЙ™nЙ™ qurulmuЕџ ЕџЙ™bЙ™kЙ™ adapteri var:\n"
-"\n"
-"%s\n"
-"\n"
-"Yerli ЕћЙ™bЙ™kЙ™ adapterinizi qurmaq ГјzЙ™rЙ™yЙ™m?"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "ЕћЙ™bЙ™kЙ™ ara ГјzГј"
+msgid "Anguilla"
+msgstr "Anquilla"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS sahЙ™si"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
-"SisteminizdЙ™ ЕџЙ™bЙ™kЙ™ kartД± tapД±la bilmЙ™yib.AvadanlД±ДџД± quran vasitЙ™ni iЕџЙ™ "
-"salД±n."
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+msgid "Antarctica"
+msgstr "Antarktika"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Interface %s"
-msgstr "Ara Гјz %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Mount options"
+msgstr "Modul seçənəkləri:"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Ara Гњz %s (%s modulu iЕџlЙ™dilir)"
+msgid "Jamaica"
+msgstr "Yamayka"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "Г‡ap Edici Vericisi"
-
-#: ../../standalone/drakgw:1
-#, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"baДџlantД±nД±zdan faydalana bilЙ™cЙ™klЙ™r.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacД±nД±z var."
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi"
+msgid "Please wait, preparing installation..."
+msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
+msgid "Czech (QWERTZ)"
+msgstr "Г‡ex dili (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "XidmЙ™tlЙ™r fЙ™allaЕџdД±rД±lД±r..."
+msgid "Track network card id (useful for laptops)"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "Qapı nömrəsi rəqəmlə yazılmalıdır"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "DisketdЙ™n geri Г§aДџД±r"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "keç"
+msgid "Add to LVM"
+msgstr "LVMЙ™ Й™lavЙ™ et"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "reconfigure"
-msgstr "yenidЙ™n quraЕџdД±r"
+msgid "DNS server"
+msgstr "DNS verici"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "enable"
-msgstr "fЙ™allaЕџdД±r"
+msgid "Trinidad and Tobago"
+msgstr "Trinidad vЙ™ Tobaqo"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"VЙ™ artД±q passivlЙ™ЕџdirilmiЕџdir.\n"
-"\n"
-"NЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi passivləşdirildi"
+msgid "simple"
+msgstr "bЙ™sit"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "İnternet Bağlantısı Bölüşdürülməsi indi bağlandı"
+msgid "Clear all"
+msgstr "HamД±sД±nД± tЙ™mizlЙ™"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "BЙ™li, hЙ™r iki sД±naq sЙ™hifЙ™sini dЙ™ Г§ap et"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "VericilЙ™r baДџlanД±r..."
+msgid "Adapter %s: %s"
+msgstr "%s Adapteri: %s"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "disable"
-msgstr "passivlЙ™Еџdir"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Fokland AdalarД± (Malvin)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Unknown model"
 msgstr ""
-"İnternet Bağlantısı Bölüşdürülməsi qurulması artıq bitdi.\n"
-"VЙ™ artД±q fЙ™allaЕџdД±rД±lmД±ЕџdД±r.\n"
-"\n"
-"NЙ™ etmЙ™k istЙ™yirsiniz?"
 
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "İnternet Bağlantısı Bölüşdürülməsi fəallaşdırıldı"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "TanД±tma"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now"
+msgstr "Fayl sistemi qurДџularД±"
+
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "/_File"
+msgstr "/_Fayl"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakhelp:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
+"Linuks 2.2 seriyasД± Г§Й™kirdЙ™klЙ™rindЙ™ firewall\n"
+"qurmaq üçün üçün paket süzülməsini başlat."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Path"
+msgid "Tamil (ISCII-layout)"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mayotte"
+msgstr "Mayot"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "group :"
-msgstr "Д°Еџ qrupu"
+msgid "Searching for scanners ..."
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "user :"
-msgstr "Д°stifadЙ™Г§i adД±"
+msgid "Partitioning"
+msgstr "Г‡ap Edici"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Path selection"
-msgstr "Paket seçkilərini saxla"
+msgid "Russia"
+msgstr "Rusca"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "eternet kart tapД±ldД±"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Syslog"
+msgstr "sistem qeydi"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Can't create catalog!"
+msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "Not enough free space for auto-allocating"
+msgstr "Avtomatik yerləşdirmə üçün boş sahə yoxdur"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Set-GID"
-msgstr ""
+msgid "Set root password"
+msgstr "Root parolunu qur"
 
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Set-UID"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "sticky-bit"
+msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr ""
+"%s bölməsi böyüklüyü dəyişdirildirkdən sonra bu bölmədəki bütün mə'lumatlar "
+"silinЙ™cЙ™kdir"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "QapД±"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "BuraxД±lД±Еџ: %s\n"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Current user"
-msgstr "Д°stifadЙ™Г§ini qЙ™bul et"
-
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "browse"
-msgstr ""
+msgid "Internet connection configuration"
+msgstr "Д°nternet baДџlantД±sД± quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Edit current rule"
+msgid "Scanning for TV channels"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "edit"
+msgid "Kernel:"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Növbəni sil"
+msgid "/_About..."
+msgstr "/Kömək/_Haqqında..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "delete"
-msgstr "Sil"
+msgid "Bengali"
+msgstr "fЙ™allaЕџdД±r"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Г‡ap Edicisiz"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Preference: "
+msgstr "XГјsusiyyЙ™tlЙ™r: "
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Modul Й™lavЙ™ et"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Wizard..."
+msgstr "Sehirbaz..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "Move selected rule down one level"
+msgid "Services: %d activated for %d registered"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Down"
-msgstr "QurtardД±"
+#: ../../any.pm:1
+#, c-format
+msgid "Create a bootdisk"
+msgstr "Açılış disketi yarat"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Solomon Islands"
+msgstr "Solomon AdalarД±"
 
-#: ../../standalone/drakperm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Up"
-msgstr ""
+msgid "(module %s)"
+msgstr "(modul %s)"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "Workgroup"
+msgstr "Д°Еџ qrupu"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "Г‡ap Edici Ev sahibi"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "bölmə %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Г‡ap edici adД± tЙ™kcЙ™ hЙ™rf, rЙ™qЙ™m vЙ™ alt xЙ™tt daxil edЙ™ bilЙ™r"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "group"
-msgstr "Д°Еџ qrupu"
+msgid "Show current interface configuration"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Д°stifadЙ™Г§i adД±"
+#: ../../help.pm:1
+#, c-format
+msgid "Development"
+msgstr "TЙ™crГјbi"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "path"
-msgstr ""
+msgid "Done"
+msgstr "QurtardД±"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Avtomatik qurulum disketi hazД±rlanД±r"
+msgid "Web Server"
+msgstr "Verici"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "\tDo not include System Files\n"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Chile"
+msgstr "Г‡ili"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Yerli Г‡ap Edici"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
-
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(%s artД±q Й™lavЙ™ edilmiЕџdir)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "The DHCP start ip"
+msgid ", using command %s"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "Alt and Shift keys simultaneously"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Ara Гњz %s (%s modulu iЕџlЙ™dilir)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "İnternetə bağlanmaq üçün şəbəkə adapteri seçin."
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
 msgstr ""
-"Kompüterınızi İnternet bağlantısını bölüşdürmək üçün quraşdırırsınız.\n"
-"Bu seçənəklə yerli şəbəkənizdəki başqa kompüterlər sizin İnternet "
-"baДџlantД±nД±zdan faydalana bilЙ™cЙ™klЙ™r.\n"
-"\n"
-"Xəbədarlıq: Yerli Şəbəkə (LAN) qurmaq üçün uyğun Şəbəkə Adapterinə "
-"ehtiyacД±nД±z var."
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+msgid "Add/Del Users"
+msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ QuraЕџdД±rД±lmasД±"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Xahiş edirik gözləyin, qurulum hazırlanır"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "QurДџular"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "System Options"
-msgstr "Modul seçənəkləri:"
+msgid "Here is the full list of available countries"
+msgstr "Bütün mövcud klaviaturaların siyahısı"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Network Options"
-msgstr "Modul seçənəkləri:"
+msgid "Alternative test page (A4)"
+msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
 
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"AЕџaДџД±dakД± siyahД±dakД± bГјtГјn CD'lЙ™rЙ™ sahib isЙ™niz, OLDU'ya basД±n.\n"
+"CD'lərin heç birinə sahib deyilsəniz, İMTİNA ET'ə basın.\n"
+"CD'lərdən bə'ziləi əksik isə, onları seçili vəziyyətdən çıxardıb OLDU'ya "
+"basД±n."
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Uzaq Çap Edici (lpd) Seçənəkləri"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Security Level:"
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+msgid "Backup user files"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (ЖЏsas)"
+msgid "New"
+msgstr "yeni"
 
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "BaДџlД± deyil"
+msgid "Load from floppy"
+msgstr "DisketdЙ™n geri Г§aДџД±r"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "AЕџaДџД±dakД± paketlЙ™r sistemdЙ™n silinЙ™cЙ™klЙ™r"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "AvadanlД±qlar tanД±nД±r..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Norveçcə"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Г‡ap Edici BaДџlantД±sД±"
+msgid "Searching for new scanners ..."
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Monitorunuzu seçin"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "choose image"
-msgstr "Monitorunuzu seçin"
+msgid "select path to restore (instead of /)"
+msgstr "Xahiş edirik siçanınızın növünü seçin."
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
 msgid "Configure bootsplash picture"
 msgstr "XidmЙ™tlЙ™ri qur"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "Г‡in"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Choose color"
-msgstr "Monitorunuzu seçin"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "Sistemi qur"
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "GГјrcГјstan"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Preview"
-msgstr "avadanlД±q"
+msgid "Reading data of installed printers..."
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "verici"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "%s sГјrГјcГјsГјnЙ™ FAT ЕџЙ™killЙ™ndirilmiЕџ bir disket taxД±n"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "Lütdən Gözləyin... Qurğular əlavə edilir"
 
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Emeliyyat sistemi secici GRUB'a xos gЙ™lmissiniz!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text width"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "PaylaЕџdД±rma adД±"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Rezolyusiya"
-
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "first step creation"
-msgstr "açılış disketi yaradılması"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "Ev sahibi adД±"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Ecuador"
+msgstr "Ekvador"
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "Д°stifadЙ™Г§i Й™lavЙ™ et"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Have a nice day!"
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "XawTV isn't installed!"
+msgid "I can't find needed image file `%s'."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "PaketlЙ™r qurulurkЙ™n bir xЙ™ta oldu:"
-
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Scanning for TV channels"
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "Area:"
-msgstr ""
+msgid "Shell"
+msgstr "QabД±q"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "Sao Tome and Principe"
+msgstr "Sao Tome vЙ™ Prinsip"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
+msgid "Can't login using username %s (bad password?)"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "FransД±zca"
+msgid "Azerbaidjani (latin)"
+msgstr "AzЙ™rbaycanca (latД±n)"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "East Europe"
-msgstr "Avropa"
+msgid "Package not installed"
+msgstr "Qurulumdan Г§Д±x"
 
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, fuzzy, c-format
-msgid "West Europe"
-msgstr "Avropa"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Usta"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "American Samoa"
+msgstr "Amerikan Samoa"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Protocol"
+msgstr "Protokol"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "FransД±zca (Kanada/Quebec)"
+msgid "Copy fonts on your system"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "USA (cable-hrc)"
+msgid "Harddrake help"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "USA (cable)"
+msgid "Bogomips"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
-"\n"
 "\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+"                    DrakBackup Report Details\n"
 "\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "primary"
+msgid "Restore all backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d saniyЙ™ sonra Г§Д±xД±lacaq"
-
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "if set to yes, check open ports."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Гњmumi"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "unknown"
-msgstr "bilinmЙ™yЙ™n"
+msgid "You can't select/unselect this package"
+msgstr "Bu paketi seçə bilməzsiniz/sistemdən çıxarda bilməzsınız"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "XЙ™bЙ™rdarlД±q"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Run config tool"
+msgid ""
+"\n"
+"- Other Files:\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "Siçan qurğuları"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Information"
-msgstr "Mə'lumatı göstər"
+msgid "Remote host name"
+msgstr "UzaqdakД± ev sahibi adД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "AvadanlД±q mЙ™'lumatД±na bax"
+msgid "deactivate now"
+msgstr "FЙ™al"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Sabit disk seçkisi"
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "%s qapД±sД±nda tapД±ldД±"
+msgid "Computing the size of the Windows partition"
+msgstr "Windows bölməsindəki boş sahəni işlət"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Author:"
-msgstr "Avtomatik yoxla"
+msgid "Italy"
+msgstr "Д°talyanca"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
-msgstr ""
+msgid "Name of printer"
+msgstr "Г‡ap edici adД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/Kömək/_Haqqında..."
+msgid "disable"
+msgstr "passivlЙ™Еџdir"
 
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "%s ayrД±lД±rkЙ™n xЙ™ta oldu: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Do it!"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Ekran kartınızı seçin"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Kayman AdalarД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Harddrake help"
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Д°zah"
+msgid "Select model manually"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Kömək"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Г‡Д±x"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Format"
+msgstr "ЕћЙ™killЙ™ndir"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Seçənəklər"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"ADSL ilЙ™ internetЙ™ baДџlanmanД±n Й™n yaxЕџД± yolu pppoe'dur.\n"
+"BЙ™zi baДџlantД±lar pptp istifadЙ™ edir, Г§ox azД± isЙ™ dhcp iЕџlЙ™dir.\n"
+"Bilmirsiniz isə 'pppop istifadə et'i seçin"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "the vendor name of the processor"
+msgid "Various"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "the vendor name of the device"
+msgid "Zip"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Siçanınızın bağlı olduğu serial Qapıyı seçin."
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ЕћЙ™killЙ™ndirilir"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the number of the processor"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Processor ID"
+msgid "PDQ"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "network printer port"
-msgstr "ЕћЙ™bЙ™kЙ™ Г‡ap Edicisi (soket) "
+msgid "Albanian"
+msgstr "Farsca"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "the name of the CPU"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "Ad: "
+msgid "Lithuania"
+msgstr "Litvaniya"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 dГјymЙ™li"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "BЙ™sit"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 dГјymЙ™li"
+msgid "Detected model: %s %s"
+msgstr "%s tapД±ldД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Official vendor name of the cpu"
+msgid "MandrakeSoft has selected the best software for you"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "Modul adД±"
-
-#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Siçan"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Kart mem (DMA)"
+msgid "Local files"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "maybe"
+msgstr "bЙ™lkЙ™"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Media class"
-msgstr ""
+msgid "Panama"
+msgstr "Panama"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "sЙ™viyyЙ™"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "ЕћЙ™killЙ™ndir"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 min rЙ™ng (16 bits)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "Böyüklüyü: %d KB\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "X ilə Açılış"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "Xahiş edirik siçanınızı seçin"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Is FPU present"
+msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "%d səviyyə RAID üçün çatmayan sayda disk bölməsi\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
 msgstr ""
+"Aşağıda yazıçıdakı növbələr verilmişdir.\n"
+"Yenilərini əlavə edə bilər, və ya mövcud olanları dəyişdirə bilərsiniz."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Connected"
+msgstr "BaДџlandД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "Г‡ap Edicisiz"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Macedonian"
+msgstr "Makedoniya dili"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Flags"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "/File/_Save"
+msgstr "/Fayl/_Qeyd Et"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
+msgstr "Mali"
+
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Module"
-msgstr "Siçan"
+msgid "No details"
+msgstr "ЖЏtraflД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "very nice"
+msgstr "Й™la"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Keçit avadanlığı"
+msgid "Preview"
+msgstr "avadanlД±q"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Old device file"
-msgstr "Fayl seç"
+msgid "Please select media for backup..."
+msgstr "Xahiş edirik istifadə üçün bir dil seçin."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "This field describes the device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 verici: %s\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP AlД±cД±sД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "GГјrcГј dili (\"Rus\" sД±rasД±)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Seçənəklər"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
+msgid "Your printer model"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cpuid family"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "Hal:"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Drive capacity"
+msgid "The %s is unsupported"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "USB avadanlığınız üçün sürücüləri yükləyin."
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Cache size"
-msgstr "parça böyüklüyü"
+msgid "Disk"
+msgstr "Danimarka dili"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "Г‡ap Edici avadanlД±ДџД± URI"
+
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Israel"
+msgstr "Д°srail"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "French Guiana"
+msgstr "FransД±z GvineyasД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
+
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Bus identification"
-msgstr "TanД±tma"
+msgid "add a rule"
+msgstr "Modul Й™lavЙ™ et"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "A command line must be entered!"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bogomips"
+msgid "Select user manually"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "Д°nternet qurДџularД±"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Channel"
-msgstr "LЙ™Дџv et"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Bağlantınızı açılışda başlatmaq istəyirsiniz?"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "QapД±"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bus"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "SД±naq sЙ™hifЙ™si Г§ap edilir..."
-
-#: ../../standalone/keyboarddrake:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Konsolda BackSpace'in Silmə funksyasını görməyini istəyirmisiniz?"
+msgid "Accept user"
+msgstr "Д°stifadЙ™Г§ini qЙ™bul et"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Klaviatura quruluşunu seçiniz."
+msgid "Server"
+msgstr "Verici"
 
-#: ../../standalone/livedrake:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "TЙ™kmillЙ™ЕџdirmЙ™ iЕџi baЕџlaya bilmir !!!\n"
+msgid "Bad choice, try again\n"
+msgstr "XЙ™talД± tЙ™rcih, tЙ™krar sД±nayД±n\n"
 
-#: ../../standalone/livedrake:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Heard and McDonald Islands"
+msgstr "Hird AdasД± vЙ™ Mkdonald AdalarД±"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+msgid "No alternative driver"
 msgstr ""
-"Qurma Cd-Romunu sГјrГјcГјnГјzЙ™ taxД±n vЙ™ OLDUya basД±n.\n"
-"Əgər Cd-Rom əlinizdə yox isə, bu Cd-Rom-dan qurmamaq üçün RƏDD ETə basın."
 
-#: ../../standalone/livedrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Cd-Romu dЙ™yiЕџdir"
+msgid "Toggle to expert mode"
+msgstr "Usta moduna keç"
 
-#: ../../standalone/localedrake:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "(on this machine)"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP ГјnvanД± 1.2.3.4 ЕџЙ™klindЙ™ olmalД±dД±r"
+
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Save as.."
-msgstr "FЙ™rqli qeyd et..."
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "XahiЕџ edirik tЙ™krar sД±nayД±n"
+msgid "Looking at packages already installed..."
+msgstr "Bu paketi sistemdЙ™n Г§Д±xarda bilmЙ™zsД±nД±z. ArtД±q qurulmuЕџdur."
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "QuraЕџdД±rma"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Driver"
+msgstr "SГјrГјcГј"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
+"Linuxconf sistem qurДџularД±nД±zД± idarЙ™ edЙ™n proqramlarД±\n"
+"müxtəlif vəzifələri açılışda icra edər."
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "load setting"
-msgstr "ЕћЙ™killЙ™ndirilir"
+msgid "Printer on remote lpd server"
+msgstr "Uzaq Г§ap edici vericisi(lpd)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "service setting"
-msgstr "avadanlД±q"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
+msgstr ""
+"Yaboot NewWorld MacIntosh avadalığı üçün açılış idarəcisidir. Ayrıca\n"
+"GNU/Linuks, MacOS, vЙ™ ya MacOSX sistemlЙ™rini kompГјterinizdЙ™ varsa, "
+"açacaqdır.\n"
+"Normalda, bu Й™mЙ™liyyat sistemlЙ™ri dГјzgГјn tapД±lД±b qurula bilirlЙ™r\n"
+"ЖЏgЙ™r belЙ™ olmazsa, bu ekrandan Й™llЙ™ lazД±mi qurДџularД± girЙ™ bilЙ™rsiniz.\n"
+"DГјzgГјn parametrlЙ™ri girib girmЙ™diyinizi yaxЕџД±ca bir yoxlayД±n.\n"
+"\n"
+"\n"
+"Yaboot ana seçənəkləri:\n"
+"\n"
+"\n"
+"  - Başlanğıc İsmarıcı: Açılışdan əvvəl çıxan sadə bir ismarıc.\n"
+"\n"
+"\n"
+"  - Açılış Avadanlığı: GNU/Linuksu hardan başlatmaq istədiyinizi bildirir."
+"ГњmumiyyЙ™tlЙ™ bu mЙ™'lumatД± daha Й™vvЙ™l \"bootstrap\" quraЕџdД±rД±lmasД± "
+"sД±rasД±ndabildirmiЕџ olacaqsД±nД±z.\n"
+"\n"
+"\n"
+"  - Açıq Firmware Gecikməsi: LILOdan fərqli olaraq, yabootda iki dənə "
+"gecikmЙ™ vardД±r\n"
+"Birinci gecikmə saniyələrlə ölçülür və bu arada siz\n"
+"CD, OF açılışı, MacOS və ya Linuks arasında seçki aparmalısınız.\n"
+"\n"
+"\n"
+"  - Kernel Açılış Vaxt Dolması: Bu vaxt dolması LILO açılış gecikməsinə "
+"uyДџun gЙ™lir.  Linuksu\n"
+"seçdikdən sonra ana kernel parametri olaraq bu gecikmə 0.1 saniyə olaraq "
+"qurulu olacaqdД±r.\n"
+"\n"
+"\n"
+"  - CD Açılışı Fəallaşsınmı?: Bu seçənəklə CDdən açılışı timsal edən 'C' "
+"xarakteri ilk açılışda çıxacaqdır.\n"
+"\n"
+"\n"
+"  - OF Açılışı Fəallaşsın?: Bu seçənəklə OFdən (Open Firmware) açılışını "
+"timsal edЙ™n 'N' xarakteri\n"
+"ilk açılışda çıxacaqdır.\n"
+"\n"
+"\n"
+"  - Ana OS: OF gecikməsi müddəti dolduğu vaxt hansı OSnin açılacağını "
+"göstərir."
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Г‡ap Edici Vericisi"
+#: ../../mouse.pm:1
+#, c-format
+msgid "No mouse"
+msgstr "Siçansızs"
 
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "avadanlД±q"
+msgid "Germany"
+msgstr "Almanca"
 
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS Verici"
+msgid "Austria"
+msgstr "serial"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS Verici"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix mЙ™ktub vericisi, Inn xЙ™bЙ™r vericisi"
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Collapse Tree"
+msgstr "AДџacД± Qapat"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS Verici"
+msgid "Auto Install Configurator"
+msgstr "Qurulum sonrasД± qurДџular"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "SahЙ™(domain) adД±"
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure networking"
+msgstr "ЕћЙ™bЙ™kЙ™ni qur"
 
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Apache World Wide Web Server"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "Sistem yГјklЙ™yicisini haraya qurmaq istЙ™yirsiniz?"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
 "\n"
-"Here, you'll be able to set up the alert system.\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Mail alert"
+msgid "The %s is not supported by this version of Mandrake Linux."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "xahiş edirik, gözləyin, fayl daranır: %s"
+msgid "DHCP client"
+msgstr "DHCP alД±cД±sД±"
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Content of the file"
-msgstr "Fayl mЙ™zmunu"
+msgid "Restoring from file %s failed: %s"
+msgstr "%s faylД±ndan qurtarД±lД±Еџda xЙ™ta: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Calendar"
-msgstr "TЙ™qvim"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech mouse (serial ya da köhnə C7 növü)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose file"
-msgstr "Fayl seç"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "amma oxЕџamД±r"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Keçit avadanlığı"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "matching"
-msgstr "oxЕџayД±r"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Settings"
-msgstr "QurДџular"
+msgid "Boot Style Configuration"
+msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "A tool to monitor your logs"
-msgstr "QeydlЙ™rinizЙ™ baxan vasitЙ™"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "search"
-msgstr "axtar"
+msgid "Backup files not found at %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Thank you for choosing Mandrake Linux 9.1"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Syslog"
-msgstr "sistem qeydi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "ErmenicЙ™ (fonetik)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Messages"
-msgstr "ismarД±clar"
+msgid "Card model:"
+msgstr "Kart mem (DMA)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "User"
-msgstr "Д°stifadЙ™Г§i adД±"
+msgid "Thin Client"
+msgstr "DHCP AlД±cД±sД±"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Kömək/_Haqqında..."
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "NIS Verici"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Seçənəklər/Sınaq"
+msgid "Turkmenistan"
+msgstr "TГјrkmЙ™nistan"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr "/Fayl/-"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "Uzaq Г‡ap Edici"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/Save _As"
-msgstr "/Fayl/_FЙ™rqli Qeyd Et"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Install themes"
+msgstr "Sistemi qur"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Fayl/_Qeyd Et"
+msgid "Espanol"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Preparing installation"
+msgstr "Qurulum hazД±rlanД±r"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Fayl/_Aç"
+msgid "Edit selected host/network"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add User -->"
+msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Fayl/_TЙ™ze"
+msgid "Nauru"
+msgstr "Nauru"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Show only for the selected day"
-msgstr "Təkcə bu gününkünü göstər"
+msgid "True Type fonts installation"
+msgstr "Qurulum hazД±rlanД±r"
 
-#: ../../standalone/mousedrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "3 dГјymЙ™ emulasiyasД±"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr ""
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Xahiş edirik siçanınızın növünü seçin."
+msgid "LAN configuration"
+msgstr "Yerli ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Connect %s"
-msgstr "BaДџlan"
+msgid "hard disk model"
+msgstr "Kart mem (DMA)"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "BaДџlantД±nД± kЙ™s"
+#: ../../fsedit.pm:1
+#, c-format
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "%s üçün LVM Məntiqi Cildini istifadə edə bilməzsiniz"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Get Windows Fonts"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "received"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Iranian"
+msgstr "Farsca"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "received: "
-msgstr ""
+msgid "Croatia"
+msgstr "XД±rvatД±stan"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "sent: "
-msgstr ""
+msgid "Gateway:"
+msgstr "Keçit:"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Local measure"
-msgstr "Yerli Г‡ap Edici"
+msgid "Add server"
+msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "Uzaq Г‡ap Edici"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "average"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "AvadanlД±q: "
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Color configuration"
-msgstr "QuraЕџdД±rma"
+msgid "Printerdrake"
+msgstr "Г‡ap Edici"
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "License agreement"
+msgstr "Lisenziya sözləşməsi"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Bağlantı növü:"
+msgid "System Options"
+msgstr "Modul seçənəkləri:"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Disconnection from the Internet complete."
+msgid "Please enter the directory where backups are stored"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "Təhlükəsizlik səviyyəsini seçin"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Disconnection from the Internet failed."
+msgid "This host is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Д°nternetЙ™ baДџlan"
+msgid ", USB printer"
+msgstr "Г‡ap Edicisiz"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Д°nternetЙ™ baДџlan"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Şəkilləndiriləcək disk bölmələrini seçin"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "BaДџlantД±nД±z sД±nanД±r..."
+#: ../../steps.pm:1
+#, c-format
+msgid "Configure X"
+msgstr "X qur"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Logs"
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "TГјrkcЙ™ (Й™nЙ™nЙ™vi \"F\" klaviatura)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Congratulations!"
+msgstr "TЙ™briklЙ™r!"
+
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Bağlantı növü:"
+msgid "Use owner id for execution"
+msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Down"
+msgstr "QurtardД±"
+
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Receiving Speed:"
+msgid "Raw printer (No driver)"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Fayla qeyd et"
+msgid "Install rpm"
+msgstr "Qurulum"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Statistics"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profil: "
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "ЕћЙ™bЙ™kЙ™ quraЕџdД±rД±lmasД±"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Time remaining "
+msgstr "Qalan mГјddЙ™t"
 
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Yerli Г‡ap Edici"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "UK keyboard"
+msgstr "Д°ngiliz (UK) klaviaturasД±"
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Name/IP address of host:"
-msgstr ""
+msgid "Unmount"
+msgstr "AyД±r"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Uninstall Fonts"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
 #, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Ekran kartınızı seçin"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Xahiş edirik siçanınızı seçin"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German (no dead keys)"
+msgstr "Almanca (Г¶lГј dГјymЙ™lЙ™r olmasД±n)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "Transferring %s..."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Yerli Г‡ap Edici"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 min rЙ™ng (15 bits)"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "oxЕџayД±r"
+#: ../../any.pm:1
+#, c-format
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Növbəni sil"
+msgid "Reboot"
+msgstr "Kök"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "%s tapД±ldД±"
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr "Qambiya"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Add host"
-msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
+msgid "Mandrake Control Center"
+msgstr "Д°darЙ™ MЙ™rkЙ™zi"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "BoЕџ sahЙ™ni istifadЙ™ et"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Uzaq Г‡ap Edici"
-
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use the scanners on hosts: "
+msgid "\t-Tape \n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Use scanners on remote computers"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Г‡ap Edici"
+msgid "Remember this password"
+msgstr "Parolsuz"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Internet Connection Sharing is now enabled."
+msgstr "İnternet Bağlantısı Bölüşdürülməsi indi açıldı"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "\t-Network by SSH.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Yerli Г‡ap Edici"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Yerli Г‡ap Edici"
+msgid "Use the free space on the Windows partition"
+msgstr "Windows bölməsindəki boş sahəni işlət"
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Г‡ap Edici"
+msgid "%s found on %s, configure it automatically?"
+msgstr "Bir Г§ap edici qurmaq istЙ™yirsiniz?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Add a scanner manually"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Yerli Г‡ap Edici"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 sГјrГјcГј: %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid ""
-"The following scanner\n"
 "\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+"                      DrakBackup Report \n"
+"\n"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Qurmaq istədiyiniz paketləri seçin"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Papua New Guinea"
+msgstr "Papua Yeni Qvineya"
+
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
+msgid "Serbian (cyrillic)"
+msgstr "AzЙ™rbaycanca (kiril)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+msgid "Make kernel message quiet by default"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "choose device"
-msgstr "Açılış avadanlığı"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "Г‡ap edicini sД±namaq istЙ™yirsiniz?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please select the device where your %s is attached"
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Yerli Г‡ap Edici"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Açılış disketi yaradılır"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Avtomatik tЙ™sbit iЕџlЙ™t"
+msgid "Wait please, testing your connection..."
+msgstr "BaДџlantД±nД±z sД±nanД±r..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
-msgstr ""
+msgid "Login ID"
+msgstr "GiriЕџ adД±"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
-msgid "The %s is unsupported"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS TCP/IP şəbəkələrində fayl bölüşülməsi üçün istifadə edilən məşhur bir \n"
+"protokoldur. Bu xidmЙ™t NFS fayl qД±fД±lД± istifadЙ™sinЙ™ imkan verЙ™r."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP AlД±cД±sД±"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr ""
+msgid "dismiss"
+msgstr "keç"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Port: %s"
-msgstr "QapД±"
+msgid "Printing/Scanning on \"%s\""
+msgstr "ЕћЙ™bЙ™kЙ™ dayandД±rД±lД±r"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ", "
+msgid "omit raid modules"
+msgstr "raid modulları keç"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd, lpr'nin düzgün olaraq işləməsi üçün lazımi çap edici vasitəsidir.\n"
+"lpd əsasən, çap vəzifələrini idarə edən və onları çap ediciyə göndərən "
+"vericidir."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "%s tapД±ldД±"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet Connection Configuration"
+msgstr "Д°nternet BaДџlantД±sД± QuraЕџdД±rД±lmasД±"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid " ("
+msgid "comma separated numbers"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Ekran kartınızı seçin"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "Move selected rule up one level"
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Bir Г§ap edici qurmaq istЙ™yirsiniz?"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "SiseminizdЙ™ ЕџЙ™bЙ™kЙ™ adapteri yoxdur!"
 
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "%s qapД±sД±nda tapД±ldД±"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "ЕћЙ™bЙ™kЙ™ni yenidЙ™n baЕџlatmaq istЙ™yirsiniz?"
 
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "I can't find any room for installing"
+msgstr "Artıq bölmə əlavə edilə bilməz"
 
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Yerli Г‡ap Edici"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "Modify RAID"
+msgstr "RAIDi dЙ™yiЕџdir"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
+"ISDN PCI kart tapdım, amma növünü bilmirəm. Xahiş edirik sonrakı ekrandakı "
+"kartlardan birini seçin."
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Add user"
+msgstr "Д°stifadЙ™Г§ini Й™lavЙ™ et"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
-msgstr ""
+msgid "RAID-disks %s\n"
+msgstr "RAID-disklЙ™ri %s\n"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Liberia"
+msgstr "Liberiya"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Klaviaturanızı seçin"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Format partitions"
+msgstr "Bölmə şəkilləndirilməsi"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Qurulum TЙ™rzi QuraЕџdД±rД±lmasД±"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "CUPS sГјrГјcГј datasД± oxunur..."
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
+msgid "enable radio support"
 msgstr ""
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Д°nternet qurДџularД±"
+msgid "Scanner sharing to hosts: "
+msgstr "Г‡ap Edici"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Loopback faylД± adД±: %s"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Modeminizin hansı serial qapıya bağlı olduğunu seçiniz"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "A customizable environment"
+msgid "Do not transfer printers"
 msgstr ""
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Açılışda gecikmə müddəti"
+
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Xahiş edirik bir bölmə üstünə tıqlayın"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Д°stifadЙ™Г§i adД±"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "XЙ™talД± yedЙ™klЙ™mЙ™ faylД±"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Configure"
+msgstr "Qur"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Ekran kartınızı seçin"
+
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Backup Users"
 msgstr ""
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"XahiЕџ edirik kompГјterinizn adД±nД± girin.\n"
+"MЙ™sЙ™lЙ™n``kompГјteradД±.sahЙ™adД±.com''.\n"
+"Əgər şəbəkə keçidi istifadə edirsinizsə bunun da IP nömrəsini girməlisiniz."
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Çap Edici Bağlantısı Seçin"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Yeni bölmə yarat"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The official MandrakeSoft Store"
+msgid "Mandrake Tools Explanation"
 msgstr ""
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Yerli Г‡ap Edici"
+
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"BЙ™zi paketlЙ™r doДџru olaraq qurulumu bitirmЙ™di.\n"
+"cdrom sГјrГјcГјnГјz ya da cdromunuz dГјzgГјn iЕџlЙ™mir.\n"
+"ЖЏvvЙ™ldЙ™n Linuks qurulu bir sistemdЙ™ \"rpm -qpl Mandrake/RPMS/*.rpm\"'yi\n"
+"istifadЙ™ edЙ™rЙ™k Cd-Rom'u yoxlayД±n.\n"
 
-#: ../../share/advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "%s tapД±ldД±"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "if set to yes, run the daily security checks."
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr ""
+msgid "Azerbaijan"
+msgstr "AzЙ™rbaycan"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "Г‡ap ediciniz nЙ™ ЕџЙ™kildЙ™ baДџlД±dД±r?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Usta"
-
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+msgid "Security level"
+msgstr "TЙ™hlГјkЙ™sizlik sЙ™viyyЙ™sinin quraЕџdД±rД±lmasД±"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Rezolyusiya"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "Usta"
+msgid "Services"
+msgstr "avadanlД±q"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -17532,10 +17569,6 @@ msgstr ""
 "göstəriciləri, vs."
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Masa ГјstГј"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Oyun stansiyasД±"
 
@@ -17606,10 +17639,6 @@ msgid ""
 msgstr "KDE, əsas qrafiki ara üz və yardımçi proqramlar kolleksiyası"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Qrafiki Ara Гњz"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome iЕџ stansiyasД±"
 
@@ -17629,10 +17658,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm, vs."
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "TЙ™crГјbi"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "C vЙ™ C++ inkiЕџaf kitabxanalarД±, proqramlarД± vЙ™ daxil edilЙ™cЙ™k fayllar"
 
@@ -17704,39 +17729,82 @@ msgstr "NFS vericisi, SMB vericisi, SSH vericisi, VЙ™kil Verici"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Multimedya stansiyasД±"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Elektronik mЙ™ktub vЙ™ xЙ™bЙ™r oxuyucusu (pine, mutt, tin..) vЙ™ Web sЙ™yyahlarД±"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Д°nternet baДџlantД±sД± & quraЕџdД±rД±lmasД±"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "SЙ™s vЙ™ video Г§alД±nmasД±/dГјzЙ™liЕџ proqramlarД±"
+#~ msgid "Configure the connection"
+#~ msgstr "ЕћЙ™bЙ™kЙ™ni qur"
+
+#~ msgid "Disconnect"
+#~ msgstr "BaДџlantД±nД± kЙ™s"
+
+#~ msgid "Connect"
+#~ msgstr "BaДџlan"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "BaДџlantД±nД±zД± yenidЙ™n quraЕџdД±ra bilЙ™rsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Д°stЙ™sЙ™niz Д°nternetЙ™ baДџlana bilЙ™rsiniz ya da yeniden quraЕџdД±ra bilЙ™rsiniz."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "HЙ™lЙ™ Д°nternetЙ™ baДџlД± deyilsiniz."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "BaДџlantД±nД±zД± kЙ™sЙ™ bilЙ™rsiniz. Ya da baДџlantД±nД± yenidЙ™n dЙ™ quraЕџdД±ra "
+#~ "bilЙ™rsiniz."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "ArtД±q Д°nternetЙ™ baДџlД±sД±nД±z."
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Oyun stansiyasД±"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "SЙ™s vЙ™ video Г§alД±nmasД±/dГјzЙ™liЕџ proqramlarД±"
+#~ msgid "Author:"
+#~ msgstr "Avtomatik yoxla"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Oyun stansiyasД±"
+#~ msgid "Audio station"
+#~ msgstr "Multimedya stansiyasД±"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Qrafika proqramlarД±, mЙ™sЙ™lЙ™n The Gimp"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "SЙ™s vЙ™ video Г§alД±nmasД±/dГјzЙ™liЕџ proqramlarД±"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Elektronik mЙ™ktub vЙ™ xЙ™bЙ™r oxuyucusu (pine, mutt, tin..) vЙ™ Web sЙ™yyahlarД±"
+#~ msgid "Video station"
+#~ msgstr "Oyun stansiyasД±"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "SЙ™s vЙ™ video Г§alД±nmasД±/dГјzЙ™liЕџ proqramlarД±"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Oyun stansiyasД±"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Qrafika proqramlarД±, mЙ™sЙ™lЙ™n The Gimp"
 
 #, fuzzy
 #~ msgid "Printer sharing"
@@ -17904,10 +17972,6 @@ msgstr ""
 #~ "iЕџlЙ™mЙ™yЙ™ bilЙ™r."
 
 #, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "GГјncЙ™llЙ™mЙ™"
-
-#, fuzzy
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "QurДџularД± sД±namaq istЙ™yirsiniz?"
 
diff --git a/perl-install/share/po/be.po b/perl-install/share/po/be.po
index d02b5504f..3fceb1332 100644
--- a/perl-install/share/po/be.po
+++ b/perl-install/share/po/be.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX VERSION\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2000-09-24 12:30 +0100\n"
 "Last-Translator: Alexander Bokovoy <ab@avilink.net>\n"
 "Language-Team: be\n"
@@ -13,933 +13,1474 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+msgid "Scanning partitions to find mount points"
 msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "Адмена"
-
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Launch userdrake"
+msgid "if set to yes, check additions/removals of suid root files."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid "\t\tErase=%s"
 msgstr ""
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "Сеткавы прынтэр (TCP/Socket)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "Устаўце дыскету ў дыскавод %s"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
+"Таблiца размяшчэння рэзервовага дыску мае iншы памер\n"
+"Працягваць далей?"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Which username"
+msgstr "Iмя карыстальнiку:"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Па выбару"
+msgid "Which type of entry do you want to add?"
+msgstr "Якi тып пункта жадаеце дадаць?"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Allow all users"
-msgstr "Дадаць карыстальнiка"
+msgid "Restore partition table"
+msgstr "Дадатковая таблiца раздзелаў"
 
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
 #, fuzzy, c-format
-msgid "No sharing"
-msgstr "Чакаецца"
+msgid "On CUPS server \"%s\""
+msgstr "IP сервера SMB"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "More"
-msgstr "Перанос"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "Настройка пасля ўсталявання"
 
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Here is the full list of available countries"
+msgid "Use ``%s'' instead"
+msgstr "Выкарыстоўвайце ``%s'' замест"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Тып"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "калi ласка, пазначце тып вашай мышы."
+#: ../../lang.pm:1
+#, c-format
+msgid "Sri Lanka"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " / Region"
-msgstr "Памеры экрану"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Central African Republic"
+msgstr ""
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Прылада-шлюз"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Country"
-msgstr "Манцiраванне"
+msgid "Ethernetcard"
+msgstr "цiкава"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Parameters"
+msgstr ""
+
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "All languages"
-msgstr "Выбар мовы"
+msgid "Auto-detect"
+msgstr "Аддалены прынтэр"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Use Unicode by default"
+msgid "Interface:"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../steps.pm:1
+#, c-format
+msgid "Select installation class"
+msgstr "Клас усталявання"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "on CDROM"
+msgstr ""
+
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"\n"
+"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "Калi ласка, абярыце мову для карыстання."
+msgid "Belarus"
+msgstr "Беларускі"
 
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Абярыце мэнэджар вокнаў:"
+msgid "Error writing to file %s"
+msgstr "Памылка запiсу ў файл %s"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Абярыце асноўнага карыстальнiка:"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
+msgstr ""
+"ampd выкарыстоўваецца для адслежвання статусу батарэi i вядзення "
+"статыстыкi.\n"
+"Яго можна выкарыстоўваць для выключэння машыны пры нiзкiм зарадзе батарэi."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
+msgid "Use tape to backup"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be installed"
+msgstr "Наступныя пакеты будуць даданы да сiстэмы"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"Можна настроiць сiстэму для аўтаматычнага ўваходу ў сiстэму для\n"
-"аднаго карыстальнiка. Калi Вы не жадаеце гэтага, нацiснiце \"Адмена\"."
+msgid "CUPS configuration"
+msgstr "Настройка"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Autologin"
-msgstr "Аўтаматычны ўваход у сiстэму"
+msgid "Hong Kong"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Icon"
-msgstr "Пiктаграма"
+msgid "Not enough free space to allocate new partitions"
+msgstr "Не хапае прасторы для стварэння новых раздзелаў"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Shell"
-msgstr "Абалонка:"
+msgid "Moving"
+msgstr "Пераносім"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Password (again)"
-msgstr "Паўтарыце пароль"
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Password"
-msgstr "Пароль"
+msgid "("
+msgstr ""
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "User name"
-msgstr "Iмя карыстальнiку:"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Real name"
-msgstr "Уласнае iмя"
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Прыняць карыстальнiка"
+msgid "Lebanon"
+msgstr ""
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Done"
-msgstr "Зроблена"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "Сектар"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "Выдалiць чаргу друку"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "Абярыце файл"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bulgarian (phonetic)"
+msgstr "Армянскi (фанетычны)"
+
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "The DHCP start ip"
 msgstr ""
-"Увядзiце iмя карыстальнiку\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Add user"
-msgstr "Дадаць карыстальнiка"
+msgid "256 kB"
+msgstr "256 РљР±"
 
 #: ../../any.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Гэта iмя карыстальнiку ўжо дададзена"
+msgid "Bootloader main options"
+msgstr "Галоўныя опцыi пачатковага загрузчыку"
 
-#: ../../any.pm:1
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
+msgstr ""
+
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "Гэта iмя карыстальнiку ўжо дададзена"
+msgid "Tape"
+msgstr "Тып: "
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "Якi тып вашага ISDN злучэння?"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
 msgstr ""
-"Iмя карыстальнiку павiнна змяшчаць лiтары толькi на нiжнiм рэгiстры, \n"
-"лiчбы, `-' i `_'"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Калi ласка, увядзiце iмя карыстальнiку"
+msgid "Malaysia"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Гэты пароль занадта просты"
+msgid "Swiss (French layout)"
+msgstr "Швейцарскi (Французская раскладка)"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Паспрабуйце яшчэ раз"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid не працаздольны (можа raid прылады адсутнiчаюць?)"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Паролi не супадаюць"
+msgid "Webcam"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(ужо дададзена %s)"
+msgid "size of the (second level) cpu cache"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Стандартны"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "access to compilation tools"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "access to network tools"
+msgid "Level %s\n"
+msgstr "Узровень %s\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Luxembourg"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "access to administrative files"
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Iранскi"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "allow \"su\""
+msgid "Bus"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to rpm tools"
+msgid "Iraq"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to X programs"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Патэнцыйны адрас ЛВС канфлiктуе з бягучай канфiгурацыяй %s!\n"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configuring..."
+msgstr "Настройка IDE"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The setup has already been done, and it's currently enabled."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"У меню маюцца наступныя пункты.\n"
-"Вы можаце дадаць яшчэ, альбо змянiць iснуючыя."
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Iншая АС (windows...)"
+msgid "Password (again)"
+msgstr "Паўтарыце пароль"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Iншая АС (MacOS,...)"
+msgid "Search installed fonts"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Iншая АС (SunOS,...)"
+msgid "Venezuela"
+msgstr ""
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP адрас"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Якi тып пункта жадаеце дадаць?"
+msgid "Choose the sizes"
+msgstr "Выбар памераў"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This label is already used"
-msgstr "Гэтая метка ўжо выкарыстоўваецца"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
+#, c-format
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "Вы павiнны мець раздзел swap"
+msgid "Choose another partition"
+msgstr "Стварэнне новага раздзелу"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "Прыняць карыстальнiка"
+
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "Iмя карыстальнiку:"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You must specify a kernel image"
+msgid "Left \"Windows\" key"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "Заканчэнне настройкi"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "Пустая метка не дазваляецца"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Default"
-msgstr "Па дамаўленню"
+msgid "Guyana"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "NoVideo"
+msgid " on Novell server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Initrd-size"
-msgstr "Initrd"
+msgid "Remove a module"
+msgstr "Адваротны парадак старонак"
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Append"
-msgstr "Далучыць"
+msgid "Password"
+msgstr "Пароль"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Label"
-msgstr "Метка"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "Ненадзейна"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Advanced Configuration"
+msgstr "Заканчэнне настройкi"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Table"
-msgstr "Таблiца"
+msgid "Scanning on your HP multi-function device"
+msgstr ""
 
 #: ../../any.pm:1
 #, c-format
 msgid "Root"
 msgstr "Root"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Чытанне-запiс"
+msgid "Choose an existing RAID to add to"
+msgstr "Абярыце iснуючы RAID для дадання"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Турэцкi (сучасная \"Q\" мадэль)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Video mode"
-msgstr "Вiдэа-рэжым"
+msgid "Lilo message not found"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Image"
-msgstr "Вобраз"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Default OS?"
-msgstr "Па дамаўленню"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Enable OF Boot?"
+msgid "if needed"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Failed..."
+msgstr "Аднаўленне з файлу"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _jazz drives"
+msgstr "Аддалены прынтэр"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Enable CD Boot?"
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Kernel Boot Timeout"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Open Firmware Delay"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
+
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Boot device"
-msgstr "Загрузачная прылада"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Init Message"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
 msgstr ""
+"\n"
+"Калi вы маеце ISA карту, велiчынi на наступным экране павiнны быць "
+"сапраўднымi.\n"
+"\n"
+"Калi вы маеце PCMCIA карту, вы павiнны ведаць irq i io вашай карты.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Bootloader to use"
-msgstr "Галоўныя опцыi пачатковага загрузчыку"
+msgid "Do not print any test page"
+msgstr "Друк тэставых старонак"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Галоўныя опцыi пачатковага загрузчыку"
+msgid "Gurmukhi"
+msgstr ""
 
 #: ../../any.pm:1
 #, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
+msgid "Force No APIC"
 msgstr ""
-"Опцыя ``Абмежаванне опцыяў каманднага радку'' не выкарыстоўваецца без пароля"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Пазначце памер RAM у Mб"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr ""
+"Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Даступна шмат профiляў"
+#: ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "[keyboard]"
+msgstr "Клавiятура"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Пазначце дакладны памер RAM (знойдзена %d Mб)"
+msgid "FTP proxy"
+msgstr "FTP proxy"
 
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Ачышчаць /tmp пры кожнай загрузцы"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "Аднаўленне з файлу"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Create a bootdisk"
-msgstr "Стварыць загр. дыск"
+msgid "Show only for the selected day"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "restrict"
-msgstr "абмежаванне"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "Абмежаванне опцыяў каманднага радка"
+msgid "512 kB"
+msgstr "512 РљР±"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Force No APIC"
+msgid "Logs"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Enable ACPI"
+msgid "(Note: Parallel ports cannot be auto-detected)"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "Затрымка перад загрузкай вобразу па дамаўленню"
+msgid "<control>N"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "compact"
-msgstr "кампактна"
+msgid "What kind of card do you have?"
+msgstr "Якi тып карты вы маеце?"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Compact"
-msgstr "Кампактна"
+msgid "<control>O"
+msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "Усталяванне загрузчыку"
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Security"
+msgstr "кучаравы"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Першы сектар загрузачнага раздзелу"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Першы сектар прылады (MBR)"
+msgid "<control>Q"
+msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Агульны"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "Усталяванне LILO/GRUB"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "SILO Installation"
-msgstr "Усталяванне SILO"
+msgid "Network Configuration"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Skip"
-msgstr "Прапусцiць"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "Захаванне на дыскету"
+msgid "<control>S"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Першы сектар загрузачнага раздзелу"
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
 msgstr ""
+"Падключэнне \n"
+" не праз D-канал (вылучаныя каналы)"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Стварэнне загрузачнай дыскеты"
+msgid "Option %s must be a number!"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
+msgid "Notice"
+msgstr "гальштук"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Абярыце дыскавод, у якiм будзе стварацца загрузачная дыскета"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "Другi дыскавод"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "First floppy drive"
-msgstr "Першы дыскавод"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Выбачайце, але дыскавод недаступны"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "What type of partitioning?"
+msgstr "Якi тып друкаркi вы маеце?"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
-"З дапамогай загрузачнага дыску вы зможаце загружаць Linux таксама як i \n"
-"стандартным загрузчыкам. Гэта можа быць якасна, калi вы не жадаеце \n"
-"ўсталёўваць LILO (цi Grub), калi iншая аперацыйная сiстэма выдаляе LILO,\n"
-"цi LILO не можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама "
-"можа\n"
-"быць выкарыстаны сумесна з рамонтнай дыскетай Mandrake Linux, якая вельмi \n"
-"палегчыць выратаванне сiстэмы пасля збою.\n"
-"\n"
-"Жадаеце стварыць загрузачны дыск зараз?\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Interface"
+msgstr "Сеткавы iнтэрфейс"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Options Description:\n"
 "\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"З дапамогай загрузачнага дыска вы зможаце загружаць Linux незалежна ад\n"
-" стандартнага загрузчыка. Гэта можа быць якасна, калi вы не жадаеце \n"
-"ўсталёўваць SILO, калi iншая аперацыйная сiстэма выдаляе SILO, цi SILO не \n"
-"можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама можа быць \n"
-"выкарыстан сумесна з выратавальнай дыскетай Mandrake Linux, якая вельмi \n"
-"палегчыць выратаванне сiстэмы пасля збою.\n"
-"\n"
-"Калi жадаеце стварыць загрузачны дыск зараз, устаўце дыскету ў першы\n"
-"дыскавод i нацiснiце \"Ok\"."
 
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
 #, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
+msgid "comma separated strings"
+msgstr "Фарматаванне раздзелаў"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "Не хапае дыскавай прасторы ў /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "The highlighted entry will be booted automatically in %d seconds."
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "Праверка партоў"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "commands before booting, or 'c' for a command-line."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Press enter to boot the selected OS, 'e' to edit the"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "сервер"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "Use the %c and %c keys for selecting which entry is highlighted."
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Mexico"
+msgstr "Порт мышы"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Welcome to GRUB the operating system chooser!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "фарматаванне"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr ""
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Цi ёсць у вас %s iнтэрфейс?"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
+msgid "Switzerland"
 msgstr ""
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
+msgid "Brunei Darussalam"
 msgstr ""
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Опцыi аддаленага прынтэру lpd"
 
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
 
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
-msgstr ""
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr ""
-
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
+msgid "Configure Internet Access..."
+msgstr "Настройка службаў"
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Дадаць раздзел немагчыма"
+msgid "Norway"
+msgstr "Нарвежскi"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d секундаў"
+msgid "Danish"
+msgstr "Дацкi"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "1 minute"
-msgstr "1 С…РІiР»iРЅР°"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d С…РІiР»iРЅ"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Калi ласка, увядзiце IP канфiгурацыю для вашай машыны.\n"
+"Кожны пункт павiнен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n"
+"натацыi (напрыклад, 1.2.3.4)."
 
-#: ../../common.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "TB"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
 msgstr ""
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "GB"
+msgid "Processors"
 msgstr ""
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Bulgaria"
+msgstr "Мадьярскi"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "Размеркаванне"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "MB"
-msgstr "РњР±"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "KB"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "United States"
+msgid "partition %s is now known as %s"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Austria"
-msgstr "паслядоўная"
+msgid "Backup Other files..."
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "Iтальянскi"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "SMB server IP"
+msgstr "IP сервера SMB"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Netherlands"
+msgid "Congo (Kinshasa)"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "Гл."
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "Нарвежскi"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Таблiца размяшчэння прылады %s будзе запiсана на дыск!"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Greece"
-msgstr "Грэчаскi"
+msgid "Installing HPOJ package..."
+msgstr "Усталяванне пакету %s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Germany"
-msgstr "Нямецкi"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"З дапамогай загрузачнага дыску вы зможаце загружаць Linux таксама як i \n"
+"стандартным загрузчыкам. Гэта можа быць якасна, калi вы не жадаеце \n"
+"ўсталёўваць LILO (цi Grub), калi iншая аперацыйная сiстэма выдаляе LILO,\n"
+"цi LILO не можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама "
+"можа\n"
+"быць выкарыстаны сумесна з рамонтнай дыскетай Mandrake Linux, якая вельмi \n"
+"палегчыць выратаванне сiстэмы пасля збою.\n"
+"\n"
+"Жадаеце стварыць загрузачны дыск зараз?\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Czech Republic"
+msgid ", USB printer \\#%s"
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Belgium"
-msgstr "Бельгiйскi"
+msgid "Latvian"
+msgstr "Размеркаванне"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "France"
-msgstr "Францыя"
+msgid "monthly"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Module name"
+msgstr "Опцыi модулю:"
+
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Start at boot"
+msgstr "Стварыць загр. дыск"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Costa Rica"
+msgid "Use Incremental Backups"
 msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Памылка адкрыцця %s для запiсу: %s"
+msgid "First sector of drive (MBR)"
+msgstr "Першы сектар прылады (MBR)"
 
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Nothing to do"
+msgid "Joystick"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
+#: ../../lang.pm:1
+#, c-format
+msgid "El Salvador"
+msgstr ""
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Use Unicode by default"
 msgstr ""
-"Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n"
-"для гэтай кропкi манцiравання\n"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr ""
-"Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n"
-"для гэтай кропкi манцiравання\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы"
+msgid "Trying to rescue partition table"
+msgstr "Паспрабуем выратаваць таблiцу раздзелаў"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
+msgid "Option %s must be an integer number!"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../interactive/stdio.pm:1
+#, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Вы абралi RAID раздзел як каранёвы.\n"
-"Няма загрузчыку, якi б загрузiўся без /boot раздзела.\n"
-"Дадайце раздел /boot, калi ласка."
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Ужо ёсць раздзел з пунктам манцiравання %s\n"
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Немагчыма запусціць live upgrade !!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
+msgid "Name: "
+msgstr "IРјСЏ: "
 
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Пункт манцiравання павiнен пачынацца з /"
+msgid "16 million colors (24 bits)"
+msgstr "16 мiльёнаў колераў (24 бiты)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "Дадаць карыстальнiка"
+
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 32 Мб"
+msgid "The official MandrakeSoft Store"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Resizing"
+msgstr "Змяненне памераў"
+
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 16 Мб"
+msgid "Cable connection"
+msgstr "Злучэнне прынтэру"
+
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "User"
+msgstr "Iмя карыстальнiку:"
 
 #: ../../fsedit.pm:1
 #, fuzzy, c-format
@@ -959,816 +1500,238 @@ msgstr ""
 "\n"
 "Цi жадаеце страцiць усе раздзелы?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Памылка"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "сервер"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on parallel port \\#%s"
+msgstr "Iмя прынтэру"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Name"
+msgstr "IРјСЏ: "
+
+#: ../../raid.pm:1
 #, c-format
-msgid "with /usr"
-msgstr ""
+msgid "mkraid failed"
+msgstr "mkraid не працаздольны"
 
-#: ../../fsedit.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "simple"
+msgid "Button 3 Emulation"
 msgstr ""
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "Фарматаванне раздзелу %s"
+msgid "Sending files..."
+msgstr "Захаванне ў файл"
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "памылка разманцiравання %s: %s"
+msgid "Israeli (Phonetic)"
+msgstr "Iўрыт (фанетычны)"
 
-#: ../../fs.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "access to rpm tools"
 msgstr ""
 
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "Фарматаванне раздзелу %s"
+msgid "edit"
+msgstr "РЎСЏСЂСЌРґРЅi"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Checking %s"
-msgstr "Памеры экрану: %s\n"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "Фарматаванне раздзелу %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "URI прынтэру"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "Стварэнне i фарматаванне файла %s"
+msgid "Permission problem accessing CD."
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "Не ведаю як адфарматаваць %s з тыпам %s"
+msgid "Phone number"
+msgstr "Нумар тэлефону"
 
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s памылка фарматавання %s"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Printer name, description, location"
+msgstr "Злучэнне прынтэру"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (broadcast)"
 msgstr ""
-"Націсніце \"Так\", калі жадаеце выдаліць усе дадзеныя\n"
-"і раздзелы на гэтым дыску. Будзце уважлівыя, пасля гэтай аперацыі вы не\n"
-"\n"
-"здолееце аднавіць любыя дадзеныя і раздзелы, улічваючы і дадзеныя Windows\n"
-"\n"
-"\n"
-"Націсніце \"Адмена\" каб адмяніць аперацыю без страты дадзеных і раздзелаў"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"Абярыце жорскі дыск які жадаеце ачысціць для ўсталявання\n"
-"новага раздзелу Mandrake Linux. Будзце ўважлівыя, усе дадзеныя на дыску "
-"будуць\n"
-" знішчаны і іх немагчыма будзе аднавіць."
+"Please choose the\n"
+"media for backup."
+msgstr "Калi ласка, абярыце мову для карыстання."
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "Use Xinerama extension"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback"
+msgstr "Вiртуальная файлавая сiстэма (loopback)"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "West Europe"
+msgstr "Еўропа"
+
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "Вызначэнне жорсткага дыску"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgid "Copying %s"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "Абярыце манiтор"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
+msgid "Dominican Republic"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Swaziland"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
+msgid "Set-UID"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (ад LInux LOader) i Grub - гэта загрузчыкi. Яны могуць загрузiць "
-"РґСЂСѓРіСѓСЋ\n"
-"GNU/Linux цi любую iншую аперацыйную сiстэму, усталяваную на кампутары.\n"
-"Звычайна, гэтыя iншыя аперацыйныя сiстэмы карэктна вызначаюцца i\n"
-"ўсталёўваюцца. Калi гэта не атрымалася, то вы можаце дадаць любы запiс\n"
-"самастойна. Будзьце ўпэўнены, што вы задалi карэктныя параметры.\n"
-"\n"
-"\n"
-"Таксама вы можаце пажадаць i не дабаўляць iншыя аперацыйныя сiстэмы.\n"
-"У такiм выпадку патрэбна выдалiць адпаведныя запiсы. Але ж тады вам \n"
-"патрэбна будзе загрузачная дыскета, каб загрузiцца!"
+msgid "Please check if you are using CDRW media"
+msgstr "Націсніце на раздзел"
 
 #: ../../help.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
+"Абярыце жорскі дыск які жадаеце ачысціць для ўсталявання\n"
+"новага раздзелу Mandrake Linux. Будзце ўважлівыя, усе дадзеныя на дыску "
+"будуць\n"
+" знішчаны і іх немагчыма будзе аднавіць."
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
+msgid " on parallel port \\#%s"
 msgstr ""
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "Use the %c and %c keys for selecting which entry is highlighted."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+msgid "Generic 2 Button Mouse"
+msgstr "Звычайная мыш з 2 кнопкамі"
 
-#: ../../help.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Remove the logical volumes first\n"
 msgstr ""
 
-#: ../../help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "The highlighted entry will be booted automatically in %d seconds."
 
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+msgid "Internet access"
 msgstr ""
-"На вашым дыску было знойдзена болей за адзін раздзел\n"
-"Windows. Калі ласка, абярыце той, памер якога жадаеце змяніць, "
-"кабусталяваць\n"
-"сістэму Mandrake Linux.\n"
-"\n"
-"\n"
-"Для iфармацыі, кожны раздзел адзначаны як: \"Linux імя\", \"Windows\n"
-"імя\" \"Cвойствы\".\n"
-"\"Linux Імя\" кадавана так - \"тып дыску\", \"нумар дыску\",\"нумар "
-"раздзелу\n"
-"(напрыклад, \"hda1\").\n"
-"\n"
-"\n"
-"\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n"
-"\n"
-"\"Нумар дыску\" - сімвал пасля \"hd\" ці \"sd\". Для IDE дыскаў:\n"
-"   * \"а\" \"master\" на першасным канале IDE \n"
-"   * \"b\" \"slave\" на першасным канале IDE\n"
-"   * \"c\" \"master\" на другасным канале IDE\n"
-"   * \"d\" \"slave\" на другасным канале IDE\n"
-"\n"
-"\n"
-"Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны "
-"жорскі дыск\", і г.д.\n"
-"\n"
-"\"Windows Імя\" сімвал вашага дыску ў Windows (першы дыск ці\n"
-"раздзел пазначаецца як \"C:\")."
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+msgid "Enabling servers..."
 msgstr ""
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
-"Усе раздзелы, якія былі толькі вызначаны павінны быць\n"
-"адфарматаваны (фарматаваць - значыць стварыць файлаваю сістэму).\n"
-"\n"
-"\n"
-"У той жа час, вы можаце перафарматаваць ужо існуючыя раздзелы, каб сцёрці\n"
-"дадзеныя якія яны ўтрымліваюць. Калі вы жадаеце зрабіць гэта, абярыце "
-"раздзелы\n"
-"якія жадаеце адфарматаваць.\n"
-"\n"
-"\n"
-"Заўважце, вы павінны перафарматаваць усе створаныя раздзелы. Вы павінны\n"
-"перафарматаваць раздзелы, якія ўтрымліваюць аперацыйную сістэму (тыпу \"/"
-"\",\n"
-"\"/usr\" ці \"/var\"), але не павінны перафарматаваць раздзелы, якія "
-"утрымліваюць\n"
-"дадзеныя, якія вы жадаеце захаваць (звычайна /home).\n"
-"\n"
-"\n"
-"Калі ласка, будзце ўважлівыя, абіраючы раздзелы, бо пасля фарматавання\n"
-"усе дадзеныя будуць незваротна выдаленыя.\n"
-"\n"
-"\n"
-"Націсніце \"Так\" калі вы гатовыя фарматаваць раздзеля.\n"
-"\n"
-"\n"
-"Націсніце \"Адмена\" калі жадаеце абраць іншыя раздзелы для "
-"усталяваннявашай\n"
-"новай аперацыйнай сістэмы Mandrake Linux."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Друк тэставых старонак"
 
-#: ../../help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "Ужо ёсць раздзел з пунктам манцiравання %s\n"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
@@ -1789,51 +1752,49 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 "У гэтым пункце, вы павінны абраць дзе на вашым жорскім \n"
 "дыску усталяваць аперацыйную сістэму Mandrake Linux. Калі дыск пусты\n"
@@ -1894,171 +1855,120 @@ msgstr ""
 " лёгка згубіць свае дадзеныя. Таму не абірайце гэтую опцыю калі выне ведаеце "
 "што робіце."
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "РЈРєСЂР°iРЅСЃРєi"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "Размеркаванне"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "External ISDN modem"
+msgstr "Унутраная ISDN карта"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
+msgid "if set to yes, report check result by mail."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "Your choice? (default %s) "
+msgstr "Ваш выбар? (змоўчанне %s) "
 
-#: ../../help.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "Памеры экрану"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
 msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
+"Тэставыя старонкi адпраўлены дэману друку.\n"
+"Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n"
+"Статус друку:\n"
+"%s\n"
 "\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+"Ён працуе нармальна?"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid "daily"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and one unknown printer"
+msgstr "Iмя друкаркi"
+
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "Iсландскi"
+
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "kernel version"
+msgstr "Настройка злучэння з Iнтэрнэтам"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "         Restore Configuration       "
+msgstr "Канфiгурацыя сеткi"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "Гэта дакладна?"
 
 #: ../../help.pm:1
 #, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2073,6369 +1983,6304 @@ msgid ""
 "installed and use the program described there to configure your connection."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "Настройка"
+
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
+msgid "Autoprobe"
+msgstr "Аўтапошук"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Backup system files..."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
+
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
+msgid "drakfloppy"
+msgstr "Аднаўленне з дыскеты"
+
+#: ../../standalone/drakpxe:1
+#, c-format
 msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
 "\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
 msgstr ""
-"Далей адзначаны усе існуючыя раздзелы Linux, знойдзеныя на вашым дыску,\n"
-" якія зроблены майстрам вылучэння дыскаў. Вы можаце пакінуць іх так і "
-"выкарыстўваць\n"
-" далей, бо яны добра падыходзяць для звычайнага выкарыстання. Калі вы\n"
-" ўносіце змены, вы павінны, вылучыць хаця раздзел (\"/\"). Рабіце\n"
-" раздзел не вельмі малым, бо ў адваротным выпадку вы ня здолееце усталяваць\n"
-" дастаткова праграмнага забеспячэння.Калі вы жадаеце захаваць вашыя "
-"дадзеныя\n"
-" на асобным раздзеле, вы павінны абраць пункт манціравання \"/home\".\n"
-"\n"
-"Кожны раздзел пазначаны наступным чынам \"Імя\", \"Свойствы\".\n"
-"\n"
-"\n"
-"\"Імя\" кадавана так - \"тып дыску\", \"нумар дыску\", \"нумар раздзелу\" \n"
-"(напрыклад, \"hda1\").\n"
-"\n"
-"\n"
-"\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n"
-"   * \"а\" \"master\" на першасным канале IDE \n"
-"   * \"b\" \"slave\" на першасным канале IDE\n"
-"   * \"c\" \"master\" на другасным канале IDE\n"
-"   * \"d\" \"slave\" на другасным канале IDE\n"
-"\n"
-"\n"
-"Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны "
-"жорскі дыск\", і г.д."
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
+msgid "Peru"
 msgstr ""
 
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "Мыш: %s\n"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "You must also format %s"
-msgstr ""
+msgid "Remove Windows(TM)"
+msgstr "Выдалiць Windows(TM)"
 
-#: ../../install2.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Запускае i прыпыняе X Font Server пры загрузцы i выключэннi."
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
 msgstr ""
-"Памылка: для стварэння новых файлавых сiстэмаў не знайдзены адпаведныя \n"
-"прылады. Праверце абсталяванне для пошуку iмавернай прычыны."
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Памылка чытання файлу %s"
+msgid "Madagascar"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This floppy is not FAT formatted"
+msgid "Cron not available yet as non-root"
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
+msgid "System"
+msgstr "Mouse Systems"
 
-#: ../../install_any.pm:1
-#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Немагчыма выкарыстоўваць broadcast без дамена NIS"
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "Вы жадаеце выкарыстоўваць aboot?"
 
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
 "\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
+msgstr "Опцыi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "Пароль"
+
+#: ../../common.pm:1
+#, c-format
+msgid "%d minutes"
+msgstr "%d С…РІiР»iРЅ"
+
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Graphics card: %s"
+msgstr "Вiдэакарта: %s"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "WebDAV transfer failed!"
 msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "No"
-msgstr "РќРµ"
+msgid "XFree configuration"
+msgstr "Настройка XFree"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Так"
+msgid "Choose action"
+msgstr "Абярыце дзеянне"
 
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "French Polynesia"
+msgstr ""
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
 "\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
 "\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
 "\n"
-"Do you really want to install these servers?\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
 msgstr ""
 
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "Настройка"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "Усталяванне SILO"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Bringing down the network"
-msgstr "Адлучэнне ад сеткi"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Далучэнне да сеткi"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Падрыхтоўка разделаў не ўдалася: %s"
+msgid "Installing driver for %s card %s"
+msgstr "Усталяванне драйверу для %s карты %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Майстар падрыхтоўкi раздзелаў DrakX знайшоў наступныя варыянты:"
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "I can't find any room for installing"
-msgstr "Дадаць раздзел немагчыма"
+msgid "Enable Server"
+msgstr "Сервер друку"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"Вы можаце цяпер разбiць ваш дыск %s\n"
-"Па заканчэннi не забудзьцеся захаваць змяненнi, скарыстаўшы `w'"
+msgid "Ukrainian"
+msgstr "РЈРєСЂР°iРЅСЃРєi"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use fdisk"
-msgstr "Выкарыстоўваць fdisk"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Custom disk partitioning"
-msgstr "Выкарыстоўваць iснуючы раздзел"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "Усе iснуючыя раздзелы на дыску %s i дадзеныя на iх будуць страчаны"
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local network(s)"
+msgstr "сеткавая карта не знойдзена"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "На якi з маючыхся жорсткiх дыскаў Вы жадаеце ўсталяваць Linux?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "Выдалiць Windows(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Сцёрцi дадзеныя на ўсiм дыску"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Remove Windows(TM)"
-msgstr "Выдалiць Windows(TM)"
+msgid "Firewire controllers"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
-"Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n"
-"ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)"
+"LILO (ад LInux LOader) i Grub - гэта загрузчыкi. Яны могуць загрузiць "
+"РґСЂСѓРіСѓСЋ\n"
+"GNU/Linux цi любую iншую аперацыйную сiстэму, усталяваную на кампутары.\n"
+"Звычайна, гэтыя iншыя аперацыйныя сiстэмы карэктна вызначаюцца i\n"
+"ўсталёўваюцца. Калi гэта не атрымалася, то вы можаце дадаць любы запiс\n"
+"самастойна. Будзьце ўпэўнены, што вы задалi карэктныя параметры.\n"
+"\n"
+"\n"
+"Таксама вы можаце пажадаць i не дабаўляць iншыя аперацыйныя сiстэмы.\n"
+"У такiм выпадку патрэбна выдалiць адпаведныя запiсы. Але ж тады вам \n"
+"патрэбна будзе загрузачная дыскета, каб загрузiцца!"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
+msgid "System mode"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
+"Для друку на прынтэры NetWare неабходна пазначыць iмя серверу друку NetWare "
+"(не заўсёды супадае з iменем у сетцы TCP/IP) i iмя чаргi друку, якая "
+"адпавядае абранаму прынтэру, а таксама iмя карыстальнiку i пароль."
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "Маска сеткi"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Вылiчэнне межаў файлавай сiстэмы Windows"
+msgid "Append"
+msgstr "Далучыць"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resizing"
-msgstr "Змяненне памераў"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "Раздзел %s"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Якую прастору захаваць для Windows?"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
 msgid ""
-"WARNING!\n"
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"УВАГА!\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
 "\n"
-"DrakX зараз павiнен змянiць памер вашага раздзела Windows.\n"
-"Будзьце ўважлiвы: гэтая аперацыя небяспечна. Калi вы  яшчэ не зрабiлi \n"
-"рэзервовую копiю дадзеных, то спачатку пакiньце праграму ўсталявання,"
-"выканайце scandisk i defrag на гэтым разделе, зрабiце рэзервовую копiю\n"
-"дадзеных i толькi потым зноў вярнiцеся да праграмы ўсталявання.\n"
-"Калi падрыхтавалiся, нацiснiце Ok."
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
-"Ваш раздзел з Windows занадта фрагментаваны. \n"
-"Рэкамендуем спачатку запусцiць праграму ``defrag''"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
+msgid "Network printer \"%s\", port %s"
+msgstr "Сеткавы прынтэр (TCP/Socket)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
-"У праграмы змены памераў раздзела FAT не атрымалася\n"
-"апрацаваць Ваш раздзел, памылка: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Памеры якога раздзела вы жадаеце змянiць?"
+"Калi ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да "
+"вашай лакальнай сеткi."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
+msgid "OK to restore the other files."
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n"
-"ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)"
+msgid "Please choose your keyboard layout."
+msgstr "Калi ласка, абярыце тып клавiятуры."
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Памер swap раздзелу ў Mб:"
+msgid "Printer Device URI"
+msgstr "URI прынтэру"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Каранёвы раздзел ў Mб: "
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Выбар памераў"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Памеры якога раздзела вы жадаеце змянiць?"
+msgid "Terminal-based"
+msgstr "на аснове тэрмiналу"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Выкарыстоўваць раздзел Windows для вiртуальнай файлавай сiстэмы"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "Няма iснуючых раздзелаў, якiя можна выкарыстаць"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "The user name is too long"
+msgstr "Гэта iмя карыстальнiку ўжо дададзена"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Выкарыстоўваць iснуючы раздзел"
+msgid "Other OS (windows...)"
+msgstr "Iншая АС (windows...)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "Выкарыстоўваць незанятую прастору"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Reading printer database..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Вы павiнны мець раздзел swap"
+msgid "Generate auto install floppy"
+msgstr "Стварэнне дыскеты для ўсталявання"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
 msgstr ""
-"Няма раздзела swap.\n"
-"\n"
-"Усё адно працягваць?"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"Вы павiнны мець каранёвы раздзел.\n"
-"Для гэтага стварыце раздзел (альбо адзначце ўжо iснуючы).\n"
-"Потым абярыце ``Кропка манцiравання'' i ўстанавiце яе ў `/'"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "NIS Domain"
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "No open source driver"
 msgstr ""
-"Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n"
-"Часткова інфармацыю пра іх можна атрымаць тут: %s"
 
-#: ../../install_messages.pm:1
-#, c-format
+#: ../../security/level.pm:1
+#, fuzzy, c-format
 msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
 msgstr ""
-"Вiншуем, усталяванне завершана.\n"
-"Выдалiце загрузачны дыск i нацiснiце enter для перазагрузкi.\n"
-"\n"
-"\n"
-"За iнфармацыяй пра змяненнi дадзенага выпуску Mandrake Linux,\n"
-"звяртайцесь на \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Iнфармацыя па настройке вашай сiстэмы ёсть ў пасля-ўсталёвачнай\n"
-"главе вашага Дапаможнiка Карыстальнiку з Афiцыйнага Mandrake Linux."
+"Прымаюцца ўласцiвасцi 4 узроўня, але зараз сiстэма поўнасцю зачынена.\n"
+"Параметры бяспекi ўстаноўлены на максiмум."
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "Nicaragua"
 msgstr ""
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "New Caledonia"
 msgstr ""
 
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol (EDSS1)"
+msgstr "Еўропа (EDSS1)"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "Пераход на крок `%s'\n"
+msgid "Video mode"
+msgstr "Вiдэа-рэжым"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "Паспрабуйце яшчэ раз"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "NIS Domain"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "Канфiгурацыя сеткi"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Help"
-msgstr "Дапамога"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "not configured"
-msgstr "Настройка X Window"
+msgid "New size in MB: "
+msgstr "Памер у Мб:"
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "Тып таблiцы раздзелаў: %s\n"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Configure"
-msgstr "Настройка X Window"
+msgid "Authentication Windows Domain"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "Усё роўна працягваць?"
+msgid "US keyboard"
+msgstr "US клавiятура"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "There was an error installing packages:"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
+msgid "Buttons emulation"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
-msgstr ""
-"Змянiце ваш Cd-Rom!\n"
+"Drakbackup activities via tape:\n"
 "\n"
-"Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк "
-"пасля.\n"
-"Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага "
-"Cd."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Refuse"
-msgstr "Адказаць"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Accept"
-msgstr "Прыняць"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Sending Speed:"
+msgstr "Захаванне ў файл"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Усталяванне пакету %s"
+msgid "Halt bug"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "Настройка ADSL"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d пакетаў"
+msgid "Tokelau"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "No details"
-msgstr "Падрабязнасцi"
+msgid "Bosnian"
+msgstr "Эстонскi"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Details"
-msgstr "Падрабязнасцi"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "Калi ласка, пачакайце"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Падрыхтоўка ўсталяваньня"
+msgid "Connection speed"
+msgstr "Iмя злучэння"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Time remaining "
-msgstr "Засталося часу "
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Estimating"
-msgstr "Чакаецца"
+msgid "Namibia"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Database Server"
+msgstr "Сервер друку"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Installing"
-msgstr "Усталёўваем"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Не атрымлiваецца дадаць раздзел на _адфармацiраваны_ RAID md%d"
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "Выдалiць з сiстэмы"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
+"s.\n"
+"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n"
+"ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша вiдэакарта падтрымлiваецца XFree %s, якi\n"
+"лепей падтрымлiвае карты з 2D-паскарэннем."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "Асабiсты выбар пакетаў"
+msgid "Please wait, setting security options..."
+msgstr "Падрыхтоўка ўсталяваньня"
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "Захаванне на дыскету"
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "<- Previous"
+msgid "Launch the graphical environment when your system starts"
 msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Install"
-msgstr "Усталёўка"
+msgid "hourly"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Show automatically selected packages"
+msgid "          Successfuly Restored on %s       "
 msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Яго патрэбна абнавiць"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
 msgstr ""
-"Гэты пакет павiнен быць абноўлены\n"
-"Вы ўпэўнены, што хочаце адмянiць вылучэнне?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
+msgid "Spanish"
+msgstr "Iспанскi"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "Стартавае меню"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмянiць"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "Настройка прынтэру"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету"
+msgid "Normal modem connection"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "Выбар групы пакетаў"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "Наступныя пакеты будуць выдалены"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Наступныя пакеты будуць даданы да сiстэмы"
+msgid "CUPS"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
+msgid "Run config tool"
 msgstr ""
-"Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "Значнасць: %s\n"
+msgid "Bootloader installation"
+msgstr "Усталяванне загрузчыку"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Памер: %d Kб\n"
+msgid "Root partition size in MB: "
+msgstr "Каранёвы раздзел ў Mб: "
 
 #: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Версiя: %s\n"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Гэта абавязковы пакет, яго вылучэнне нельга адмянiць"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "IРјСЏ: %s\n"
+msgid "Etherboot ISO image is %s"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) - гэта сервер даменных iмёнаў, якi выкарыстоўваецца для\n"
+"перакладання iмён вузлоў у IP адрасы."
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bad package"
-msgstr "Дрэнны пакет"
+msgid "Disconnect..."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other"
-msgstr "Іншыя"
+msgid "Saint Lucia"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "РџРѕСЂС‚"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Агульны памер: %d / %d Mб"
+msgid "Palau"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Next ->"
-msgstr "Далей ->"
+msgid "level"
+msgstr "узровень"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Асабiсты выбар пакетаў"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
 #: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Package Group Selection"
 msgstr "Выбар групы пакетаў"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "Restore Via Network Protocol: %s"
 msgstr ""
-"У Вашай сiстэме маецца недахоп рэсурсаў, таму магчымы праблемы\n"
-"пры ўсталяваннi Mandrake Linux. У гэтым выпадку паспрабуйце тэкставую\n"
-"праграму ўсталявання. Для гэтага нацiснiце `F1' у час загрузкi, а потым\n"
-"набярыце `text' i нацiснiце <ENTER>."
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Save packages selection"
-msgstr "Асабiсты выбар пакетаў"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "You can configure each parameter of the module here."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Automated"
-msgstr "Аўтаматычны"
+msgid "Choose the resolution and the color depth"
+msgstr "Выбар памераў экрану i глыбiнi колеру"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Replay"
-msgstr "Перазагрузiць"
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "Эмуляваць трэцюю кнопку?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount"
+msgstr "Манцiраванне"
+
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Generate auto install floppy"
+msgid "Creating auto install floppy"
 msgstr "Стварэнне дыскеты для ўсталявання"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Install updates"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "text box height"
 msgstr ""
-"Некаторыя крокi не завершаны.\n"
-"Вы сапраўды жадаеце выйсцi зараз?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "State"
+msgstr "Стартавае меню"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "Стварэнне дыскеты для ўсталявання"
+msgid "Be sure a media is present for the device %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../any.pm:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
+msgid "Enable multiple profiles"
+msgstr "Даступна шмат профiляў"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"These options can backup and restore all files in your /etc directory.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнiкла наступная памылка:"
+msgid "Local printer"
+msgstr "Лакальны прынтэр"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Files Restored..."
+msgstr ""
 
 #: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "Усталяванне загрузчыку"
+msgid "Package selection"
+msgstr "Выбар групы пакетаў"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Mauritania"
+msgstr ""
+
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
 msgstr ""
-"Памылка ўсталявання аboot, \n"
-"спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "All primary partitions are used"
+msgstr "Усе першасныя раздзелы выкарыстаны"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Падрыхтоўка загрузчыка"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Domain Admin Password"
-msgstr "Падцвердзiць пароль"
+msgid "Installation Server Configuration"
+msgstr "Заканчэнне настройкi"
 
 #: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "Iмя дамену"
+#, c-format
+msgid "Configuring IDE"
+msgstr "Настройка IDE"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "Навуковыя прыкладанні"
+msgid "Network functionality not configured"
+msgstr "Манiтор пакуль не настроены"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "Аўтэнтыфiкацыя"
+msgid "Configure module"
+msgstr "Настройка мышы"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "Cocos (Keeling) Islands"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "NIS сервер:"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "Далучэнне да Iнтэрнэту"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "NIS Domain"
-msgstr "NIS Domain"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Каб змяненнi ўступiлi ў дзеянне, необходна перазагрузiцца"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "Аўтэнтыфiкацыя NIS"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider phone number"
+msgstr "Нумар тэлефону правайдара"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "NIS"
-msgstr "Выкарыстоўваць NIS"
+msgid "Host %s"
+msgstr "Iмя машыны"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "сервер"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "LDAP Base dn"
-msgstr ""
+msgid "Armenia"
+msgstr "Армянскi (стары)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "Аўтэнтыфiкацыя"
+msgid "Fiji"
+msgstr "Р¤iРЅСЃРєi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "LDAP"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Local files"
-msgstr "Лакальны прынтэр"
-
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "Аўтэнтыфiкацыя"
+msgid "Second floppy drive"
+msgstr "Другi дыскавод"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
+msgid "About Harddrake"
 msgstr ""
-"Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "No password"
-msgstr "Няма паролю"
+msgid "Drive capacity"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Set root password"
-msgstr "Пароль для root"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Устаўце дыскету ў дыскавод\n"
+"Усе дадзеныя на гэтай дыскеце будуць страчаны"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr ""
+msgid "Size: %s"
+msgstr "Памер: %s"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Services: %d activated for %d registered"
+msgid "Control and Shift keys simultaneously"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Services"
-msgstr "прылада"
+msgid "secondary"
+msgstr "%d секундаў"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "System"
-msgstr "Mouse Systems"
+msgid "View Backup Configuration."
+msgstr "Канфiгурацыя сеткi"
 
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "РџРѕСЂС‚"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Галоўныя опцыi пачатковага загрузчыку"
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No password"
+msgstr "Няма паролю"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+msgid "Nigeria"
+msgstr "паслядоўная"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "Таблiца"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "There is no existing partition to use"
+msgstr "Няма iснуючых раздзелаў, якiя можна выкарыстаць"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "activated"
-msgstr "Актыўны"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Firewall"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
 msgstr ""
+"Каб друкаваць праз сокет друкаркi, вам неабходна забяспечыць\n"
+"iмя прынтэру i магчыма яго нумар порту."
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Security"
-msgstr "кучаравы"
+msgid "Hard drive information"
+msgstr "Iнфармацыя"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Настройкi ўзроўня бяспекi"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian"
+msgstr "Р СѓСЃРєi"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Network"
-msgstr "Сетка:"
+msgid "Jordan"
+msgstr "Iранскi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Сеткавы iнтэрфейс"
+msgid "Hide files"
+msgstr "mkraid не працаздольны"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "Запуск X пры старце сiстэмы"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Auto-detect printers connected to this machine"
+msgstr "Аддалены прынтэр"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "TV card"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "Выбачайце, але дыскавод недаступны"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Bolivia"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Цi ёсць у вас iншы?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Sound card"
-msgstr "Стандартны"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Remote CUPS server"
-msgstr "Аддалены сервер CUPS"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "No printer"
-msgstr "Iмя друкаркi"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Прынтэр"
-
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Mouse"
-msgstr "Порт мышы"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Timezone"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Keyboard"
-msgstr "Клавiятура"
+msgid "Bad package"
+msgstr "Дрэнны пакет"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Summary"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "NTP Server"
-msgstr "NIS сервер:"
+msgid "DrakSec Basic Options"
+msgstr "Опцыi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Ваш сiстэмны гадзiннiк усталяваны на GMT?"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Which is your timezone?"
-msgstr "Якi ваш часавы пояс?"
+msgid "Romania"
+msgstr "NIS Domain"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Жадаеце настроiць прынтэр?"
+msgid "choose device"
+msgstr "Загрузачная прылада"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Зрабiць неактыўным сеткавае злучэнне"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў"
+msgid "Canada"
+msgstr "Канадскi (Квебэк)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Выбар люстра для атрымання пакетаў"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў"
+msgid "Remove from LVM"
+msgstr "Выдалiць з LVM"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "Timezone"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "German"
+msgstr "Нямецкi"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Устаўце дыскету ў дыскавод %s"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Next ->"
+msgstr "Далей ->"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "Настройка пасля ўсталявання"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
-"Усталяванне пакету %s\n"
-"%d%%"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "Падрыхтоўка ўсталяваньня"
+msgid "Guinea-Bissau"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom пазначаны \"%s\""
+msgid "Horizontal refresh rate"
+msgstr "Часціня гарызантальный разгорткi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
 msgstr ""
-"Калi вы маеце ўсе CD дыскi са спiса нiжэй, нацiснiце Ок.\n"
-"Калi вы не маеце анi воднага з гэтых CD дыскаў, нацiснiце Адмянiць.\n"
-"Калi некаторых з CD дыскаў не маеце, адмянiце iх выдзяленне i нацiснiце Ок."
-
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "РЈСЃС‘"
+"Нельга ўсталяваць пункт манцiравання, таму што раздел выкарыстоўваецца для\n"
+"вiртуальнай файлавай сiстэмы.\n"
+"Спачатку выдалiце вiртуальную сiстэму"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "With basic documentation (recommended!)"
+msgid "USB controllers"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, fuzzy, c-format
-msgid "With X"
-msgstr "Чакайце"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+msgid "What norm is your TV using?"
+msgstr "Якi тып вашага ISDN злучэння?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Type of install"
-msgstr "Выбар пакетаў для усталявання"
+msgid "Type:"
+msgstr "Тып: "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Selected size is larger than available space"
-msgstr ""
+msgid "Share name"
+msgstr "Iмя для размеркаванага рэсурсу"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Устаўце дыскету ў дыскавод %s"
+msgid "enable"
+msgstr "Таблiца"
 
 #: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "Аднаўленне з дыскеты"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Package selection"
-msgstr "Выбар групы пакетаў"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "Захаванне на дыскету"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "Аднаўленне з дыскеты"
+msgid "Remove the loopback file?"
+msgstr "Фарматаванне вiртуальнага раздзелу %s"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Selected size is larger than available space"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "NCP server name missing!"
 msgstr ""
-"Ваша сiстэма не мае дастакова месца для ўсталявання цi абнаўлення (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Прагляд даступных пакетаў"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Пошук пакетаў для абнаўлення"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "калi ласка, пазначце тып вашай мышы."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
+msgid "Hard Disk Backup files..."
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Прагляд даступных пакетаў"
+msgid "Laotian"
+msgstr "Размеркаванне"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Samoa"
 msgstr ""
-"Не хапае месца ў буферы падкачкi (swap) для ўсталявання, павялiчце яго."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
 msgstr ""
+"Пратакол rstat дазваляе карыстальнiкам сеткi атрымлiваць\n"
+"памеры нагрузкi для кожнай машыны сеткi."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "Праверыць на наяўнасць дрэнных блокаў?"
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Выбар раздзелаў для фарматавання"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Scanner"
+msgstr "Абярыце вiдэакарту"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Каб мадыфiкацыя таблiцы раздзелаў здейснiлася, патрэбна перазагрузка."
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "Папярэджанне: тэсцiраванне на гэтай вiдэакарце небяспечна"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr ""
+"Iмя карыстальнiку павiнна змяшчаць лiтары толькi на нiжнiм рэгiстры, \n"
+"лiчбы, `-' i `_'"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "Абярыце пункты манцiравання"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "абавязкова"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "No partition available"
-msgstr "няма даступных раздзелаў"
+msgid "Welcome To Crackers"
+msgstr "Сардэчна запрашаем у Crackers"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Настройка IDE"
+msgid "Module options:"
+msgstr "Опцыi модулю:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Secure your networks with the Multi Network Firewall"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Настройка карт PCMCIA ..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "Настройка сеткi"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Abort"
+msgstr "Адмянiць"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Button 3 Emulation"
+msgid "No password prompt on %s at port %s"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Выбар пакетаў для ўсталявання"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Выкарыстоўваць незанятую прастору"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Button 2 Emulation"
+msgid "\t-CDROM.\n"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Buttons emulation"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
 msgstr ""
+"Ваш раздзел з Windows занадта фрагментаваны. \n"
+"Рэкамендуем спачатку запусцiць праграму ``defrag''"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Нарвежскi)"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Порт мышы"
+msgid "Hard Disk Backup Progress..."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "калi ласка, пазначце тып вашай мышы."
+msgid "Unable to fork: %s"
+msgstr "Зрабiць неактыўным сеткавае злучэнне"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Паролi не супадаюць"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Type: "
+msgstr "Тып: "
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Раздзел %s"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Edit Client"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Абярыце ўсталяванне цi абнаўленне"
+msgid "no fonts found"
+msgstr "Не знайшлi %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "Усталёўка"
+msgid "Mouse"
+msgstr "Порт мышы"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr ""
+msgid "not enough room in /boot"
+msgstr "Не хапае дыскавай прасторы ў /boot"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Калi ласка, абярыце тып клавiятуры."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Choosing an arbitratry driver"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Quit"
-msgstr "Выхад"
+msgid "Host name"
+msgstr "Iмя машыны"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "License agreement"
-msgstr "Ліцэнзійная дамова"
+msgid "Liechtenstein"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "An error occurred"
-msgstr "Адбылася памылка"
+msgid "the color of the progress bar"
+msgstr ""
 
-#: ../../install_steps_newt.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid "Suppress Fonts Files"
 msgstr ""
-"  <Tab>/<Alt-Tab> памiж элементамi  |  <Space> выбар  | <F12> наступны экран "
 
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Усталяванне Mandrake Linux %s"
+msgid "Add to RAID"
+msgstr "Дадаць да RAID"
 
-#: ../../install_steps.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Дыскавод недаступны"
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "Сардэчна запрашае� у %s"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "No floppy drive available!"
+msgstr "Дыскавод недаступны"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
 msgstr ""
-"Некаторыя важныя пакеты не былi ўсталяваны карэктна.\n"
-"Другi ваш cdrom дыск цi ваш cdrom маюць дэфекты.\n"
-"Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl Mandrake/RPMS/*."
-"rpm\"\n"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "Дубляванне пункту манцiравання %s"
+msgid "Continue anyway?"
+msgstr "Сапраўды працягваць?"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
 msgstr ""
-"Узнiкла памылка, якую не атрымліваецца карэктна апрацаваць,\n"
-"таму працягвайце на сваю рызыку."
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Калi ласка, пачакайце"
+msgid "Printer"
+msgstr "Прынтэр"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ok"
-msgstr "РћРє"
+msgid "Saudi Arabia"
+msgstr ""
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Finish"
-msgstr "Р¤iРЅСЃРєi"
+msgid "Internet"
+msgstr "цiкава"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Basic"
-msgstr "Простые"
+msgid "Some devices were added:\n"
+msgstr ""
 
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Advanced"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Геаметрыя: %s цылiндраў, %s галовак, %s сектараў\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "Адлучэнне ад сеткi"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
 msgstr ""
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remove"
-msgstr "Аддалены прынтэр"
+msgid "Restore From Tape"
+msgstr "Дадатковая таблiца раздзелаў"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Modify"
-msgstr "Змянiць RAID"
+msgid "Choose the profile to configure"
+msgstr "Абярыце асноўнага карыстальнiка:"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Add"
-msgstr "Дадаць"
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
 
-#: ../../interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Choose a file"
-msgstr "Абярыце дзеянне"
+msgid "Backup Now from configuration file"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+msgid "Mount points should contain only alphanumerical characters"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Right \"Windows\" key"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "See hardware info"
+msgstr "Гл. апiсанне абсталявання"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "First sector of boot partition"
+msgstr "Першы сектар загрузачнага раздзелу"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid "Printer manufacturer, model"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "PDQ - Print, Don't Queue"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "CapsLock key"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
+msgid "Subnet Mask:"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Both Shift keys simultaneously"
+msgid "LiLo and Bootsplash themes installation successfull"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Right Alt key"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
 msgstr ""
+"Два крытычных параметры - гэта часціня вертыкальнай разгорткi, цi\n"
+"часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n"
+"часціня гарызантальнай сiнхранiзацыi разгорткi, цi часціня вываду\n"
+"радкоў экрану.\n"
+"\n"
+"ВЕЛЬМI ВАЖНА, каб абраны вамi манiтор меў часціню сiнхранiзацыi, якая\n"
+"не перавышае фактычныя магчымасцi вашага манiтору: у процiлеглым выпадку\n"
+"вы можаце сапсаваць манiтор.\n"
+"Калi вы сумняваецеся, абярыце кансерватыўныя настройкi."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Азербайджанскі (latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Вьетнамскi \"нумар радка\" QWERTY"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard (international)"
-msgstr "US клавiятура (мiжнародная)"
+msgid "Modify"
+msgstr "Змянiць RAID"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "US keyboard"
-msgstr "US клавiятура"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "UK keyboard"
-msgstr "UK клавiятура"
+msgid "Need hostname, username and password!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "РЈРєСЂР°iРЅСЃРєi"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Турэцкi (сучасная \"Q\" мадэль)"
+msgid "HardDrake"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Турэцкi (традыцыёная \"F\" мадэль)"
+msgid "new"
+msgstr "РЅРѕРІС‹"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "Тайская клавiятура"
+msgid "Would you like to try again?"
+msgstr "Жадаеце настроiць прынтэр?"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Тайская клавiятура"
+msgid "Wizard"
+msgstr "Майстар стварэння"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "РђСЂРјСЏРЅСЃРєi (typewriter)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr ""
+msgid "Edit selected server"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Азербайджанскі (кірыліца)"
+msgid "Please choose where you want to backup"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Славацкi (QWERTY)"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Каб мадыфiкацыя таблiцы раздзелаў здейснiлася, патрэбна перазагрузка."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Славацкi (QWERTZ)"
+msgid "Do not include the browser cache"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Slovenian"
-msgstr "Славенскi"
+msgid "Please, choose your keyboard layout."
+msgstr "Калi ласка, абярыце тып клавiятуры."
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "Швецкi"
+msgid "Standard"
+msgstr "Стандартны"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
+msgid "Please choose your mouse type."
+msgstr "калi ласка, пазначце тып вашай мышы."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Russian"
-msgstr "Р СѓСЃРєi"
+msgid "Connect..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "Настройка прынтэру"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Canadian (Quebec)"
-msgstr "Канадскi (Квебэк)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Portuguese"
-msgstr "Партугальскi"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Польскi (qwertz раскладка)"
+msgid "not configured"
+msgstr "Настройка X Window"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Польскi (стандартная раскладка)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Norwegian"
-msgstr "Нарвежскi"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "Адмянiць"
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "Галандскi"
+msgid "Proxies configuration"
+msgstr "Настройка proxy кэшуючых сервераў"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Maltese (UK)"
-msgstr ""
+msgid "Start: sector %s\n"
+msgstr "Пачатак: сектар %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Азербайджанскі (кірыліца)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Myanmar (Burmese)"
-msgstr ""
+msgid "Network interface already configured"
+msgstr "Манiтор пакуль не настроены"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Macedonian"
+msgid "Couldn't access the floppy!"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Malayalam"
+msgid "connecting to Bugzilla wizard ..."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Latvian"
-msgstr "Размеркаванне"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Лiтоўскi \"фанетычны\" QWERTY"
+msgid "Mail Server"
+msgstr "Сервер друку"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Лiтоўскi \"нумар радка\" QWERTY"
+msgid "Please click on a partition"
+msgstr "Націсніце на раздзел"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Лiтоўскi AZERTY (новы)"
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Лiтоўскi AZERTY (стары)"
+msgid "Have a nice day!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Laotian"
-msgstr "Размеркаванне"
+msgid "across Network"
+msgstr "Сетка:"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Latin American"
-msgstr "Лацiна-Амерыканскi"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Korean keyboard"
-msgstr "UK клавiятура"
+msgid "Upgrade %s"
+msgstr "Раздзел %s"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Японскi 106 клавiш"
+msgid "Select Printer Connection"
+msgstr "Выбар тыпу злучэння прынтэру"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Inuktitut"
+msgid "Scanning for TV channels in progress ..."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Italian"
-msgstr "Iтальянскi"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Icelandic"
-msgstr "Iсландскi"
-
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Iranian"
-msgstr "Iранскi"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Iўрыт (фанетычны)"
+msgid "IP Range Start:"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "Iўрыт"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Iнтэрнэт суперсервер-дэман (завецца inetd) запускае пры старце \n"
+"колькасць розных iнтэрнэт службаў, якiя неабходны. Яго можна выкарыстоўваць "
+"для пуску\n"
+"шматлікіх службаў, уключаючы telnet, ftp, rsh i rlogin. Блакуючы inetd, "
+"блакуем\n"
+"усе службы, за якiя ён адказвае."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Croatian"
-msgstr "Харвацкi"
+msgid "the height of the progress bar"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hungarian"
-msgstr "Мадьярскi"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Gurmukhi"
+msgid "Argentina"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Gujarati"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Greek"
-msgstr "Грэчаскi"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Domain Name Server"
+msgstr "Iмя дамену"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Грузiнскi (\"Лацiнская\" раскладка)"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Level:"
+msgstr "Настройкi ўзроўня бяспекi"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Грузiнскi (\"Руская\" раскладка)"
+msgid "Mount points must begin with a leading /"
+msgstr "Пункт манцiравання павiнен пачынацца з /"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "French"
-msgstr "Французскi"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "Сервер друку"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "Р¤iРЅСЃРєi"
+msgid "Quit without saving"
+msgstr "Выйсцi без захавання"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "Iспанскi"
+msgid "Yemen"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Estonian"
-msgstr "Эстонскi"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Нарвежскi)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Дацкi"
+msgid "Hard drive detection"
+msgstr "Вызначэнне жорсткага дыску"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Devanagari"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "German (no dead keys)"
-msgstr "Нямецкi (няма заблакiраваных клавiш)"
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Please enter the WebDAV server URL"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "German"
-msgstr "Нямецкi"
+msgid "Tajikistan"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Чешскi (QWERTY)"
+msgid "Accept"
+msgstr "Прыняць"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Чешскi (QWERTZ)"
+msgid "Description"
+msgstr "Апiсанне"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Швейцарскi (Французская раскладка)"
+msgid "Error opening %s for writing: %s"
+msgstr "Памылка адкрыцця %s для запiсу: %s"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Швейцарскi (Нямецкая раскладка)"
+msgid "Mouse type: %s\n"
+msgstr "Тып мышы: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Belarusian"
-msgstr "Беларускі"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr ""
+"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
+"s."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Эстонскi"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Калi ласка, абярыце тып клавiятуры."
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Бразiльскi (ABNT-2)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Балгарскi"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Армянскi (фанетычны)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Bengali"
-msgstr "Таблiца"
+msgid "Expert Area"
+msgstr "Эксперт"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Бельгiйскi"
+msgid "Choose a monitor"
+msgstr "Абярыце манiтор"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Азербайджанскі (latin)"
+msgid "Empty label not allowed"
+msgstr "Пустая метка не дазваляецца"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Arabic"
+msgid "Maltese (UK)"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Армянскi (фанетычны)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (typewriter)"
-msgstr "РђСЂРјСЏРЅСЃРєi (typewriter)"
-
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Армянскi (стары)"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Albanian"
-msgstr "Iранскi"
+msgid "I can't add any more partition"
+msgstr "Дадаць раздзел немагчыма"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish"
-msgstr "Польскi"
+msgid "Size in MB: "
+msgstr "Памер у Мб:"
 
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Remote printer"
+msgstr "Аддалены прынтэр"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "можа быць"
+msgid "Please choose a language to use."
+msgstr "Калi ласка, абярыце мову для карыстання."
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Zambia"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
 msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "South Africa"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
 msgstr ""
+"Можна настроiць сiстэму для аўтаматычнага ўваходу ў сiстэму для\n"
+"аднаго карыстальнiка. Калi Вы не жадаеце гэтага, нацiснiце \"Адмена\"."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Serbia"
-msgstr "паслядоўная"
+msgid "Floppy format"
+msgstr "Фарматаванне"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Mayotte"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Yemen"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Прынтэр"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Samoa"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Wallis and Futuna"
+msgid "The scanners on this machine are available to other computers"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Vanuatu"
-msgstr ""
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "Першы сектар загрузачнага раздзелу"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Vietnam"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "Друк тэставых старонак"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "Згарнуць дрэва"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Venezuela"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
 msgstr ""
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Vatican"
-msgstr "Размеркаванне"
+msgid "Guam"
+msgstr "Забавы"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Uzbekistan"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Uruguay"
+msgid "/Options/Test"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
 msgstr ""
+"Гэты узровень неабходна выкарыстоўваць з асцярогай. Сiстэма будзе прасцей\n"
+"у карыстаннi, але i больш чутнай: гэты узровень бяспекi нельга "
+"выкарыстоўваць\n"
+"на машынах, якiя далучаны да сеткi цi да Internet. Уваход не абаронены "
+"паролем."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Uganda"
-msgstr "Адкат"
+msgid "Mounting partition %s"
+msgstr "Фарматаванне раздзелу %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "User name"
+msgstr "Iмя карыстальнiку:"
+
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Ukraine"
-msgstr "РЈРєСЂР°iРЅСЃРєi"
+msgid "New configuration (isdn-light)"
+msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tanzania"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "Выкарыстоўваць DiskDrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "Размеркаванне"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Памеры якога раздзела вы жадаеце змянiць?"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tuvalu"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "Настр. файлавых сiстэмаў"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "Праверка партоў"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turkey"
+msgid ""
+"List of data to restore:\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr ""
+#: ../../fs.pm:1
+#, fuzzy, c-format
+msgid "Checking %s"
+msgstr "Памеры экрану: %s\n"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "Опцыi сокету прынтэру"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Turkmenistan"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Адрасы памяці карты (DMA)"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "East Timor"
-msgstr ""
+msgid "France"
+msgstr "Францыя"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Tokelau"
+msgid "browse"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tajikistan"
+msgid "Checking installed software..."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Thailand"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "Аддалены вузел"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Togo"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Жадаеце пратэсцiраваць друк?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "French Southern Territories"
+msgid "Turkey"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Chad"
+msgid "Alcatel speedtouch usb"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Turks and Caicos Islands"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 РєРЅРѕРїРєi"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Swaziland"
-msgstr ""
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Вьетнамскi \"нумар радка\" QWERTY"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Syria"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Module"
+msgstr "Порт мышы"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "El Salvador"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
+msgid "Hardware"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Suriname"
-msgstr "Iмя для размеркаванага рэсурсу"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Somalia"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Senegal"
-msgstr "Таблiца"
-
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "San Marino"
+msgid "Ctrl and Alt keys simultaneously"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Sierra Leone"
+msgid "United States"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Slovakia"
-msgstr "Славенскi"
+msgid "Default OS?"
+msgstr "Па дамаўленню"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "Славенскi"
+msgid "Swiss (German layout)"
+msgstr "Швейцарскi (Нямецкая раскладка)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Saint Helena"
+msgid "Configure all heads independently"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Singapore"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "NTP Server"
+msgstr "NIS сервер:"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Seychelles"
-msgstr "Абалонка:"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid "Load/Save on floppy"
+msgstr "Захаванне на дыскету"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Saudi Arabia"
+msgid "This theme does not yet have a bootsplash in %s !"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Rwanda"
-msgstr ""
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Russia"
-msgstr "Р СѓСЃРєi"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "NIS Domain"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "Памеры экрану"
+msgid "nice"
+msgstr "РґРѕР±СЂР°"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Qatar"
-msgstr "Стартавае меню"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Palau"
-msgstr ""
+msgid "Leaving in %d seconds"
+msgstr "%d секундаў"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Paraguay"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Да якога паслядоўнага порту далучаны мадэм?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Portugal"
-msgstr "РџРѕСЂС‚"
+msgid "Country"
+msgstr "Манцiраванне"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Palestine"
-msgstr "Асабiсты выбар пакетаў"
+msgid "Property"
+msgstr "РџРѕСЂС‚"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Puerto Rico"
+msgid "Ghostscript"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "Прынтэр"
+msgid "LAN Configuration"
+msgstr "Настройка"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "Ghana"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Poland"
-msgstr "Iсландскi"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Pakistan"
+msgid "Path or Module required"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Philippines"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Advanced Options"
+msgstr "Заканчэнне настройкi"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Papua New Guinea"
+msgid "Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "French Polynesia"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Peru"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Panama"
-msgstr ""
+msgid "There was an error installing packages:"
+msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Oman"
-msgstr "NIS Domain"
+msgid "Lexmark inkjet configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "New Zealand"
-msgstr ""
+msgid "Undo"
+msgstr "Адкат"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Niue"
-msgstr "гальштук"
+msgid "Save partition table"
+msgstr "Запiс таблiцы раздзелаў"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Nauru"
-msgstr ""
+msgid "Finnish"
+msgstr "Р¤iРЅСЃРєi"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Nepal"
+msgid "Macedonia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Nicaragua"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "паслядоўная"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovenian"
+msgstr "Славенскi"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Norfolk Island"
+msgid "Libya"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "Высокi"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "New Caledonia"
-msgstr ""
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Namibia"
+msgid ""
+"\n"
+"- Burn to CD"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr ""
+msgid "Table"
+msgstr "Таблiца"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Malaysia"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "Не ведаю як адфарматаваць %s з тыпам %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Mexico"
+msgid "Model"
 msgstr "Порт мышы"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Malawi"
-msgstr ""
-
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Maldives"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Mauritius"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Stop Server"
+msgstr "NIS сервер:"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Malta"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Montserrat"
+msgid "Modem"
 msgstr "Порт мышы"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mauritania"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Martinique"
+msgid "Tuvalu"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Northern Mariana Islands"
+msgid "Use auto detection"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mongolia"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
 msgstr ""
+"GPM дадае падтрымку мышы да праграмаў, якiя працуюць у тэкставым рэжыме,\n"
+"такiх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры "
+"капiраваннi i ўстаўцы,\n"
+"i ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Myanmar"
+msgid "Started on boot"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Mali"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Macedonia"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Marshall Islands"
+msgid "Automatically find available printers on remote machines"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Madagascar"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Moldova"
+msgid "East Timor"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Monaco"
-msgstr "Манiтор"
-
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Morocco"
+msgid "Del profile..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Libya"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Latvia"
-msgstr "Размеркаванне"
+msgid "Installing Foomatic..."
+msgstr "Усталяванне пакету %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Калi ласка, выйдзiце, а потым скарыстайце Ctrl-Alt-BackSpace"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Lithuania"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "Аддалены прынтэр"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Lesotho"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Liberia"
-msgstr "паслядоўная"
+msgid "Package: "
+msgstr "Пакет"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Sri Lanka"
+msgid "Can't write /etc/sysconfig/bootsplash."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Liechtenstein"
+msgid "SECURITY WARNING!"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Lucia"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "РґРѕР±СЂР°"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Lebanon"
+msgid "No, I don't want autologin"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Windows Migration tool"
+msgstr "Навуковыя прыкладанні"
+
+#: ../../any.pm:1 ../../help.pm:1
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "Выбар мовы"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Removing %s"
+msgstr "Памеры экрану: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Testing your connection..."
+msgstr "Якi тып вашага ISDN злучэння?"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cache size"
+msgstr "памер блоку"
+
+#: ../../security/level.pm:1
 #, c-format
-msgid "Laos"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
 msgstr ""
+"Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасцi сеткавага\n"
+"таксама не рэкамендавана."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Kazakhstan"
-msgstr ""
+msgid "Start sector: "
+msgstr "Пачатковы сектар:"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cayman Islands"
+msgid "Congo (Brazzaville)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Kuwait"
-msgstr "Выхад"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr "Выбар пакетаў для ўсталявання"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Korea"
-msgstr "Перанос"
+msgid "Seychelles"
+msgstr "Абалонка:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Korea (North)"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Bad password on %s"
+msgstr "Няма паролю"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Comoros"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Kiribati"
+msgid "Zambia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Cambodia"
+msgid "Security Administrator (login or email)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Kyrgyzstan"
+msgid "Sorry, we support only 2.4 kernels."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Kenya"
-msgstr "Клавiятура"
+msgid "Romanian (qwerty)"
+msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Japan"
+msgid "Under Devel ... please wait."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iранскi"
-
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Jamaica"
+msgid "Czech Republic"
 msgstr ""
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Iceland"
-msgstr "Iсландскi"
+msgid "Egypt"
+msgstr "Пуста"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Iran"
-msgstr "Iранскi"
+msgid "Old configuration (isdn4net)"
+msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Iraq"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Sound card"
+msgstr "Стандартны"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "Фарматаванне раздзелаў"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
 msgstr ""
+"Зараз вы маеце толькi адзiн вялiкi раздзел FAT\n"
+"(які звычайна выкарыстоўвае MS Dos/Windows).\n"
+"Прапаную, па-першае, змянiць памеры раздзела\n"
+"(клiкнiце на яго, а потым на \"змяненне памераў\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "British Indian Ocean Territory"
+msgid "Suppress Temporary Files"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "Iранскi"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "Iўрыт"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Change partition type"
+msgstr "Змянiць тып раздзелу"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Ireland"
-msgstr "Iсландскi"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Indonesia"
-msgstr "РЅСЏРјР°"
+msgid "Network Options"
+msgstr "Опцыi модулю:"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Hungary"
-msgstr "Мадьярскi"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Haiti"
+msgid "Statistics"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, fuzzy, c-format
-msgid "Croatia"
-msgstr "Харвацкi"
+msgid "(on %s)"
+msgstr "(модуль %s)"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Honduras"
+msgid "MM Series"
+msgstr "MM Series"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Heard and McDonald Islands"
+msgid "average"
 msgstr ""
 
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "Iмя друкаркi"
+
 #: ../../lang.pm:1
 #, c-format
-msgid "Hong Kong"
+msgid "Equatorial Guinea"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "China"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Дрэнны файл рэзервовай копii"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Guyana"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Guinea-Bissau"
+msgid "Currently, no alternative possibility is available"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Guam"
-msgstr "Забавы"
+msgid "Romanian (qwertz)"
+msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Guatemala"
-msgstr "Шлюз"
+msgid "Write Config"
+msgstr "Настройка X Window"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
 msgstr ""
+"Дэман маршрутызацыi дазваляе дынамiчным таблiцам IP маршрутызацыi\n"
+"аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n"
+"складаныя пратаколы маршрутызацыi - у вялiкiх сетках."
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Equatorial Guinea"
+msgid "Kiribati"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Guadeloupe"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guinea"
-msgstr "Агульны"
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Browse"
+msgstr "Прагляд"
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Gambia"
+msgid "CDROM"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greenland"
-msgstr "Iсландскi"
-
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Gibraltar"
-msgstr ""
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Цi жадаеце зараз паспрабаваць далучыцца да Iнтэрнэту?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghana"
+msgid "Belgian"
+msgstr "Бельгiйскi"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Do you have an ISA sound card?"
+msgstr "Цi ёсць у вас iншы?"
+
+#: ../../network/ethernet.pm:1
+#, fuzzy, c-format
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
 msgstr ""
+"Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, "
+"скарыстайце канфiгурацыйны iнструмэнт."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "French Guiana"
-msgstr "Французскi"
+msgid "Windows"
+msgstr "Навуковыя прыкладанні"
 
-#: ../../lang.pm:1
+#: ../../common.pm:1
 #, fuzzy, c-format
-msgid "Georgia"
-msgstr "Нарвежскi"
+msgid "Can't make screenshots before partitioning"
+msgstr "Дадаць раздзел немагчыма"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "Iмя машыны"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Grenada"
+msgid "/File/Save _As"
 msgstr ""
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "United Kingdom"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gabon"
+msgid "%s is not in the scanner database, configure it manually?"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Delay before booting default image"
+msgstr "Затрымка перад загрузкай вобразу па дамаўленню"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Restrict command line options"
+msgstr "Абмежаванне опцыяў каманднага радка"
+
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "Iсландскi"
+msgid "East Europe"
+msgstr "Еўропа"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Micronesia"
+msgid "Use free space"
+msgstr "Выкарыстоўваць незанятую прастору"
+
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "use dhcp"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Mail alert"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Fiji"
-msgstr "Р¤iРЅСЃРєi"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Internet configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Finland"
+msgid "Uzbekistan"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Эстонскi"
+msgid "Detected %s"
+msgstr "Дубляванне пункту манцiравання %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Spain"
-msgstr "Iспанскi"
+msgid "/Autodetect _printers"
+msgstr "Аддалены прынтэр"
 
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, fuzzy, c-format
-msgid "Eritrea"
-msgstr "Эксперт"
+msgid "Finish"
+msgstr "Р¤iРЅСЃРєi"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Western Sahara"
+msgid "Show automatically selected packages"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Egypt"
-msgstr "Пуста"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
 #: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Эстонскi"
+#, c-format
+msgid "Togo"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Ecuador"
+msgid "Something went wrong! - Is mkisofs installed?"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Algeria"
-msgstr "паслядоўная"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "16 MB"
+msgstr "16 РњР±"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "Please try again"
+msgstr "Паспрабуйце яшчэ раз"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Dominica"
-msgstr "NIS Domain"
+msgid "The model is correct"
+msgstr "Гэта дакладна?"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Denmark"
-msgstr ""
+msgid "FAT resizing failed: %s"
+msgstr "Аўтазмяненне памераў не атрымалася для раздзелу FAT %s"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Individual package selection"
+msgstr "Асабiсты выбар пакетаў"
+
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Djibouti"
-msgstr "Адмянiць"
+msgid "This partition is not resizeable"
+msgstr "Памеры якога раздзела вы жадаеце змянiць?"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr ""
+msgid "Location"
+msgstr "Размеркаванне"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Christmas Island"
+msgid "USA (cable-hrc)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "Згарнуць дрэва"
+msgid "Journalised FS"
+msgstr "памылка манцiравання"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "Шлюз"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Cuba"
+msgid "This machine"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Colombia"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Лiтара для DOS-дыску: %s (наўгад)\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select the files or directories and click on 'OK'"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cameroon"
+msgid "Bahrain"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Chile"
-msgstr "Порт мышы"
+msgid "omit scsi modules"
+msgstr "Рэжым злучэння"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Cook Islands"
+msgid "family of the cpu (eg: 6 for i686 class)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "Тып клавiятуры: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Central African Republic"
+msgid "Maltese (US)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
 msgstr ""
+"Манцiраваць i разманцiраваць усе сеткавыя файлавыя сiстэмы (NFS),\n"
+" SMB (Lan Manager/Windows) i NCP (Netware) пункты манцiравання."
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
+msgid "Tvcard"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Canada"
-msgstr "Канадскi (Квебэк)"
+msgid "Toggle between normal/expert mode"
+msgstr "Звычайны рэжым"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Belize"
-msgstr "Змяненне памераў"
+msgid "Size"
+msgstr "Памер: %s"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Беларускі"
+#: ../../help.pm:1
+#, c-format
+msgid "GRUB"
+msgstr ""
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Botswana"
-msgstr "Эстонскi"
+msgid "Greenland"
+msgstr "Iсландскi"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bouvet Island"
-msgstr ""
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bhutan"
+msgid "Not the correct tape label. Tape is labelled %s."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bahamas"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete All NBIs"
+msgstr "Абярыце файл"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Brazil"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bolivia"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr ""
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Якую канфiгурацыю XFree вы жадаеце атрымаць?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Bermuda"
-msgstr "Нямецкi"
+msgid "More"
+msgstr "Перанос"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Benin"
-msgstr "Бельгiйскi"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"На гэтам узроўне бяспекi магчыма выкарыстанне сiстэмы ў якасцi\n"
+"серверу. Узровень бяспекi дастаткова высокi для работы\n"
+"серверу, якi дапускае злучэннi са шматлiкiмi клiентамi."
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Burundi"
-msgstr ""
+msgid "Account Password"
+msgstr "Пароль для ўваходу"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bahrain"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "Мадьярскi"
+msgid "Tajik keyboard"
+msgstr "Тайская клавiятура"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Burkina Faso"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Bangladesh"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "Кропка манцiравання"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Barbados"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bosnia and Herzegovina"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Iранскi"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Australia"
-msgstr "паслядоўная"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Select file"
+msgstr "Абярыце файл"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "American Samoa"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
 msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Argentina"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
+msgid "Japan"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "Опцыi прынтэру"
+
+#: ../../standalone/localedrake:1
 #, c-format
-msgid "Angola"
+msgid "The change is done, but to be effective you must logout"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Search servers"
+msgstr "DNS сервер"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Netherlands Antilles"
+msgid "NCP queue name missing!"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Armenia"
-msgstr "Армянскi (стары)"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Iранскi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom пазначаны \"%s\""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Anguilla"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
+"Захаваць i аднавiць сiстэмны энтрапiйны пул для высокай якасцi\n"
+"генерацыі выпадковых лікаў."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "United Arab Emirates"
+msgid "Turn your computer into a reliable server"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Andorra"
-msgstr "Адкат"
+msgid " (driver %s)"
+msgstr "Сервер XFree86: %s\n"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Iранскi"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr "Файл(ы) вiртуальнай файлавай сiстэмы: %s\n"
 
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Манцiраванне дыску %s\n"
+msgid "I don't know"
+msgstr "РќРµ РІСЏРґРѕРјР°"
 
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
+msgid ", TCP/IP host \"%s\", port %s"
 msgstr ""
 
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "Рушце колам мышы!"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "To activate the mouse,"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+msgid "Post Uninstall"
+msgstr "Заканчэнне ўсталявання"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+msgid " ("
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Няма мышы"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Настройкi ўзроўня бяспекi"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "none"
-msgstr "РЅСЏРјР°"
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Азербайджанскі (кірыліца)"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "3 buttons"
-msgstr "3 РєРЅРѕРїРєi"
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Add a module"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 РєРЅРѕРїРєi"
+msgid "Profile to delete:"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "1 button"
-msgstr "2 РєРЅРѕРїРєi"
+msgid "Local measure"
+msgstr "Лакальны прынтэр"
 
 #: ../../mouse.pm:1
 #, fuzzy, c-format
 msgid "busmouse"
 msgstr "Няма мышы"
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Iмя для ўваходу (iмя карыстальнiку)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (паслядоўная, стары тып C7)"
+msgid "Fdiv bug"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "Бельгiйскi"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Uruguay"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "Асабiсты выбар пакетаў"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Name/IP address of host:"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Monitor: %s\n"
+msgstr "Манiтор: %s\n"
 
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "Iмя прынтэру"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Выбар пакетаў для ўсталявання"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "Bangladesh"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Japan (cable)"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Звычайная мыш з 3 кнопкамі"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Звычайная мыш з 2 кнопкамі"
+msgid "Initial tests"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "serial"
-msgstr "паслядоўная"
+msgid "Continue"
+msgstr "Працягнуць"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Custom Restore"
+msgstr "Па выбару"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "З колам"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Generic"
-msgstr "Агульны"
+msgid "Script-based"
+msgstr "на аснове скрыпту"
 
-#: ../../mouse.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Error reading file %s"
+msgstr "Памылка чытання файлу %s"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "фарматаванне"
 
-#: ../../mouse.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, fuzzy, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Звычайная мыш з 2 кнопкамі"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Вы павiнны мець раздзел swap"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid " on "
+msgstr ""
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Стандартны"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Мыш"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Пераключэнне памiж упарадкаваннем па групе i асобках"
+msgid "Other OS (SunOS...)"
+msgstr "Iншая АС (SunOS,...)"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Collapse Tree"
-msgstr "Згарнуць дрэва"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "Усталёўка"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Разгарнуць дрэва"
+msgid "%d packages"
+msgstr "%d пакетаў"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Info"
-msgstr "Iнфармацыя"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#, c-format
-msgid "Is this correct?"
-msgstr "Гэта дакладна?"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../my_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid ""
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Памылка запiсу ў файл %s"
+msgid "Costa Rica"
+msgstr ""
 
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "Дрэнны файл рэзервовай копii"
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "Абярыце дадатковыя настройкi для сервера"
 
-#: ../../partition_table.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Аднаўленне з файла %s не атрымалася: %s"
+msgid "Icelandic"
+msgstr "Iсландскi"
 
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
 msgstr ""
-"Вы маеце дзiрку ў таблiцы радзелаў, але я не маю магчымасцi яе скарыстаць.\n"
-"Адзiны выхад у тым, каб перамясцiць першасныя раздзелы так, каб дзiрка iшла\n"
-"адразу за пашыраным (extended) раздзелам"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Пашыраны раздзел не падтрымлiваецца гэтай платформай"
+msgid "Please relog into %s to activate the changes"
+msgstr "Калi ласка, перайдзiце ў %s для актывацыi змяненняў"
 
-#: ../../partition_table.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "памылка манцiравання: "
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
 
-#: ../../pkgs.pm:1
-#, c-format
-msgid "maybe"
-msgstr "можа быць"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Lilo/grub mode"
+msgstr "Рэжым злучэння"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "nice"
-msgstr "РґРѕР±СЂР°"
+msgid "Output"
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "very nice"
-msgstr "вельмi добра"
+msgid "Circular mounts %s\n"
+msgstr "Манцiраванне дыску %s\n"
 
-#: ../../pkgs.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "important"
-msgstr "важна"
+msgid "Martinique"
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "must have"
-msgstr "павiнны мець"
+msgid "HardDrive / NFS"
+msgstr ""
 
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Недастаткова раздзелаў для RAID узроўня %d\n"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "a number"
+msgstr "Нумар тэлефону"
 
-#: ../../raid.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid не працаздольны"
+msgid "Swedish"
+msgstr "Швецкi"
 
-#: ../../raid.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid не працаздольны (можа raid прылады адсутнiчаюць?)"
+msgid "Which %s driver should I try?"
+msgstr "Якi драйвер %s паспрабаваць?"
 
-#: ../../raid.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Не атрымлiваецца дадаць раздзел на _адфармацiраваны_ RAID md%d"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "Сектар"
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Start"
-msgstr "Стартавае меню"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
+msgstr ""
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "On boot"
-msgstr "Yaboot"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Filesystem types:"
+msgstr "Тыпы файлавых сiстэмаў:"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid ", multi-function device on HP JetDirect"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Services and deamons"
+msgid "Northern Mariana Islands"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "none"
+msgstr "РЅСЏРјР°"
+
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "stopped"
-msgstr "Далучыць"
+msgid "user :"
+msgstr "Iмя карыстальнiку:"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "running"
-msgstr "Увага!"
+msgid "Please enter your password"
+msgstr "Паспрабуйце яшчэ раз"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Абярыце, якiя сервiсы запускаць аўтаматычна пры загрузцы"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Database Server"
-msgstr "Сервер друку"
+msgid "Floppy"
+msgstr "Захаванне на дыскету"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "Опцыi аддаленага прынтэру lpd"
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Націсніце на раздзел"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "File sharing"
+msgid "Ghostscript referencing"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Internet"
-msgstr "цiкава"
+msgid "Bootloader"
+msgstr "Галоўныя опцыi пачатковага загрузчыку"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Printing"
-msgstr "Прынтэр"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move"
+msgstr "Перанос"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Запускае i прыпыняе X Font Server пры загрузцы i выключэннi."
-
-#: ../../services.pm:1
-#, c-format
-msgid "Load the drivers for your usb devices."
-msgstr ""
+msgid "Bootloader to use"
+msgstr "Галоўныя опцыi пачатковага загрузчыку"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog - гэта сродак, з дапамогай якога многiя дэманы запiсваюць "
-"паведамленнi\n"
-"ў розныя файлы статыстыкi. Гэта вельмi добра для агляду працы розных службаў."
+msgid "SMB server host"
+msgstr "Iмя серверу SMB"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Launch the sound system on your machine"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS сервер:"
 
-#: ../../services.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"Пратакол rwho дае магчымасць карыстальнiкам атрымаць спiс ўсiх\n"
-"карыстальнiкаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
-"Пратакол rusers дазваляе карыстальнiкам сеткi вызначаць, хто\n"
-"ўвайшоў i працуе на машынах ў сетцы."
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"Пратакол rstat дазваляе карыстальнiкам сеткi атрымлiваць\n"
-"памеры нагрузкi для кожнай машыны сеткi."
 
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"Дэман маршрутызацыi дазваляе дынамiчным таблiцам IP маршрутызацыi\n"
-"аднаўляцца праз RIP пратакол. RIP выкарыстоўваецца ў малых сетках, больш\n"
-"складаныя пратаколы маршрутызацыi - у вялiкiх сетках."
+msgid "4 billion colors (32 bits)"
+msgstr "4 мiлiярда колераў (24 бiты)"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+msgid "Micronesia"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Захаваць i аднавiць сiстэмны энтрапiйны пул для высокай якасцi\n"
-"генерацыі выпадковых лікаў."
-
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "License"
 msgstr ""
-"Postfix -  гэта паштовы транспартны агент, праграма, якая\n"
-"перамяшчае пошту з адной машыны на йншую."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "This may take a moment to generate the keys."
 msgstr ""
-"Portmapper (аглядальнiк партоў) кiруе RPC злучэннямi, якiя звычайна\n"
-"выкарыстоўваюцца такiмi пратаколамi як NFS i NIS. Portmap сервер павiнен "
-"выконвацца\n"
-"на машынах якiя працуюць як серверы для пратаколаў, якiя скарыстоўваюць RPC."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
 msgstr ""
-"Падтрымка PCMCIA - гэта звычайна падтрымка такiх рэчаў, як Ethernet i\n"
-"мадэмы ў наўтбуках. Вам няма неабходнасцi канфiгураваць iх, калi на вашай\n"
-"машыне iх няма, цi яна не наўтбук."
 
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid "Sagem (using pppoa) usb"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
+"Памылка: для стварэння новых файлавых сiстэмаў не знайдзены адпаведныя \n"
+"прылады. Праверце абсталяванне для пошуку iмавернай прычыны."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS -  гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n"
-"сеткi. Гэтая служба ўплывае на наяўнасць сувязi памiж NFS файламi."
+msgid "Do you want to start the connection at boot?"
+msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Processor ID"
 msgstr ""
-"NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткi.\n"
-"Гэтая служба забяспечваецца NFS серверам, якi канфiгурыруеца праз\n"
-"/etc/exports файл."
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+msgid "Sound trouble shooting"
 msgstr ""
-"Актывiзаваць/дэактывiзаваць усе сеткавыя iнтэрфейсы, сканфiгураваныя для\n"
-"старту пры загрузцы сiстэмы."
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Манцiраваць i разманцiраваць усе сеткавыя файлавыя сiстэмы (NFS),\n"
-" SMB (Lan Manager/Windows) i NCP (Netware) пункты манцiравання."
+msgid "Polish (qwerty layout)"
+msgstr "Польскi (стандартная раскладка)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) - гэта сервер даменных iмёнаў, якi выкарыстоўваецца для\n"
-"перакладання iмён вузлоў у IP адрасы."
+msgid "activate now"
+msgstr "Актыўны"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
-"lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n"
-"сервер, якi кiруе працай прынтэру(аў)."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+msgid "Host \"%s\", port %s"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr ""
+msgid "This partition can't be used for loopback"
+msgstr "Гэты раздзел не можа быць выкарыстаны пад вiртуальную файлавую сiстэму"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+msgid "File already exists. Use it?"
+msgstr "Файл ужо iснуе. Выкарыстаць яго?"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+msgid "received: "
 msgstr ""
-"Гэты пакет загружае абраную раскладку клавiятуры як набор з\n"
-"/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай "
-"kbdconfig.\n"
-"Вы можаце зрабiць даступнай яе для шматлікіх машынаў."
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+msgid "Right Alt key"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid "the list of alternative drivers for this sound card"
 msgstr ""
-"Iнтэрнэт суперсервер-дэман (завецца inetd) запускае пры старце \n"
-"колькасць розных iнтэрнэт службаў, якiя неабходны. Яго можна выкарыстоўваць "
-"для пуску\n"
-"шматлікіх службаў, уключаючы telnet, ftp, rsh i rlogin. Блакуючы inetd, "
-"блакуем\n"
-"усе службы, за якiя ён адказвае."
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache - гэта World Wide Web сервер. Ён выкарыстоўзваеца для абслугоўвання\n"
-"HTML файлаў i CGI."
+msgid "Gateway"
+msgstr "Шлюз"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Прынтэр"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+msgid "Tonga"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
+msgid "Tunisia"
 msgstr ""
-"GPM дадае падтрымку мышы да праграмаў, якiя працуюць у тэкставым рэжыме,\n"
-"такiх як Midnight Commander. Гэта дазваляе выкарыстоўваць мыш пры "
-"капiраваннi i ўстаўцы,\n"
-"i ўключае падтрымку ўсплываючых (pop-up) меню ў тэкставым рэжыме."
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Profile: "
+msgstr "памылка манцiравання: "
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
-"cron - стандартная UNIX праграма, якая выконвае праграмы карыстальнiка\n"
-"праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да "
-"стандартнага\n"
-"UNIX cron, уключаючы лепшы ўзровень бяспекi i моцныя канфiгурацыйныя опцыi."
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
 msgstr ""
-"Каманды, якiя выконваюцца, фiксуюцца па камандзе i часе яе выканання\n"
-"i выконваюцца групы каманд, калi загрузка памяцi нiжэй дастатковай."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
 msgstr ""
-"ampd выкарыстоўваецца для адслежвання статусу батарэi i вядзення "
-"статыстыкi.\n"
-"Яго можна выкарыстоўваць для выключэння машыны пры нiзкiм зарадзе батарэi."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron, перыядычны камандны планавальнiк."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "old static device name used in dev package"
 msgstr ""
 
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "Усталяванне пакету %s"
+#: ../../any.pm:1
+#, c-format
+msgid "This label is already used"
+msgstr "Гэтая метка ўжо выкарыстоўваецца"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання"
 
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection Time: "
+msgstr "Iмя злучэння"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+msgid "select perm file to see/edit"
 msgstr ""
 
-#: ../../standalone.pm:1
-#, c-format
+#: ../../standalone/livedrake:1
+#, fuzzy, c-format
 msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
+"Змянiце ваш Cd-Rom!\n"
+"\n"
+"Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк "
+"пасля.\n"
+"Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага "
+"Cd."
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Use group id for execution"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
-msgstr ""
+msgid "Choose the default user:"
+msgstr "Абярыце асноўнага карыстальнiка:"
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "Gabon"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "Клавiятура"
-
-#: ../../standalone.pm:1
-#, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"Аддалены CUPS сервер не патрабуе ад Вас настройкі прынтэру\n"
+"на гэтай машыне, ён будзе знойдзены аўтаматычна.\n"
+"Калі Вы не ўпэўнены, абярыце \"Аддалены сервер CUPS\"."
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
-msgstr ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
 
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "NIS Domain"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Пазначце дакладны памер RAM (знойдзена %d Mб)"
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Exit install"
-msgstr "Заканчэнне ўсталявання"
-
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Install updates"
-msgstr "Усталяванне сiстэмы"
+msgid "Provider dns 2 (optional)"
+msgstr "DNS 2 правайдару"
 
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Настройка службаў"
+msgid "Boot device"
+msgstr "Загрузачная прылада"
 
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "Настройка X Window"
+msgid "Which partition do you want to resize?"
+msgstr "Памеры якога раздзела вы жадаеце змянiць?"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Усталяванне загрузчыку"
+msgid "United States Minor Outlying Islands"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configure networking"
-msgstr "Настройка сеткi"
+msgid "A tool to monitor your logs"
+msgstr ""
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Add a user"
-msgstr "Дадаць карыстальнiка"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "Адмянiць"
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Root password"
-msgstr "Пароль для root"
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected on port %s"
+msgstr "Дубляванне пункту манцiравання %s"
 
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Усталяванне сiстэмы"
+msgid "LPD"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Выбар пакетаў"
+msgid "Graphics card: %s\n"
+msgstr "Вiдэакарта: %s\n"
 
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Format partitions"
-msgstr "Фарматаванне раздзелаў"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Partitioning"
-msgstr "Прынтэр"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose your keyboard"
-msgstr "Выбар клавiятуры"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Націсніце на раздзел"
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "Клас усталявання"
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Асабiсты выбар пакетаў"
 
-#: ../../steps.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Вызначэнне жорсткага дыску"
+msgid "Extended partition not supported on this platform"
+msgstr "Пашыраны раздзел не падтрымлiваецца гэтай платформай"
 
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Настройка мышы"
+msgid "ISDN Configuration"
+msgstr "Настройка ISDN"
 
-#: ../../steps.pm:1
-#, c-format
-msgid "License"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "Высокi"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Language"
-msgstr "Выбар мовы"
+msgid "Internet Connection Sharing"
+msgstr "Сумеснае Iнтэрнэт-злучэнне"
 
-#: ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "utopia 25"
+msgid "Choose file"
 msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "OK"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
 msgstr ""
+"Увага! Знойдзена існуючая сiстэма сеткавай бяспекi (firewall). Вам магчыма "
+"спатрэбіцца скарэктаваць яе пасля ўсталявання."
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
-#, c-format
-msgid "logdrake"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Адлучэнне ад сеткi"
 
-#: ../../ugtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Злучэнне прынтэру"
+
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Звычайная мыш з 2 кнопкамі"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "Абярыце вiдэакарту"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Выдалiць чаргу друку"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Xpmac (installation display driver)"
+msgid "French Southern Territories"
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "the vendor name of the processor"
 msgstr ""
-"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
-"s.\n"
-"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n"
-"ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ."
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s з эксперыментальнай падтрымкай 3D-паскарэння"
+msgid "All data on this partition should be backed-up"
+msgstr "Усе дадзеныя ў гэтым раздзеле павiнны быць зархiваваныя"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr ""
-"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
-"s."
+msgid "Installing package %s"
+msgstr "Усталяванне пакету %s"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s з падтрымкай 3D-паскарэння"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
-"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
-"s.\n"
-"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n"
-"ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ. Ваша вiдэакарта падтрымлiваецца XFree %s, якi\n"
-"лепей падтрымлiвае карты з 2D-паскарэннем."
+"Каб зрабiць больш разделаў, выдалiце адзiн i стварыце пашыраны раздзел "
+"(extended)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
-"Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў XFree %s.\n"
-"XFree %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "Сервер XFree86 %s"
-
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Канфiгураваць маю карту"
+msgid "Choose packages to install"
+msgstr "Выбар пакетаў"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Xinerama extension"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr ""
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "Усе iснуючыя раздзелы на дыску %s i дадзеныя на iх будуць страчаны"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Якую канфiгурацыю XFree вы жадаеце атрымаць?"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr ""
+"Ваша сiстэма не мае дастакова месца для ўсталявання цi абнаўлення (%d > %d)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "Настройка XFree"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Пазначце памер вiдэапамяцi"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+msgid "Bhutan"
 msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Network interface"
+msgstr "Сеткавы iнтэрфейс"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Multi-head configuration"
-msgstr "чытанне настройкi"
+msgid "Reading printer data..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "Абярыце X сервер"
+msgid "Korean keyboard"
+msgstr "UK клавiятура"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "X server"
-msgstr "X сервер"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Not connected"
+msgstr "Размеркаванне"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 Мб цi болей"
+msgid "Greek"
+msgstr "Грэчаскi"
 
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 РњР±"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 РњР±"
+msgid "Saint Kitts and Nevis"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "8 MB"
-msgstr "8 РњР±"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 РњР±"
+msgid "Enable OF Boot?"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "2 MB"
-msgstr "2 РњР±"
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 16 Мб"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "1 MB"
-msgstr "1 РњР±"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Часціня верт.разг. манiтору: %s\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 РљР±"
+msgid "path"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 РљР±"
+msgid "Mount point"
+msgstr "Кропка манцiравання"
 
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"Ці жадаеце Вы захаваць змяненні?\n"
-"Бягучая канфігурацыя:\n"
-"\n"
-"%s"
 
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Опцыi"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Test"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
 msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolution"
-msgstr "Памеры экрану"
-
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Monitor"
-msgstr "Манiтор"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "Вiдэакарта"
+msgid "Another one"
+msgstr "цiкава"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Часціня вертыкальнай разгорткi"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Часціня гарызантальный разгорткi"
+msgid "Colombia"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Два крытычных параметры - гэта часціня вертыкальнай разгорткi, цi\n"
-"часціня аднаўлення ўсяго экрану, а таксама болей важны параметр -\n"
-"часціня гарызантальнай сiнхранiзацыi разгорткi, цi часціня вываду\n"
-"радкоў экрану.\n"
-"\n"
-"ВЕЛЬМI ВАЖНА, каб абраны вамi манiтор меў часціню сiнхранiзацыi, якая\n"
-"не перавышае фактычныя магчымасцi вашага манiтору: у процiлеглым выпадку\n"
-"вы можаце сапсаваць манiтор.\n"
-"Калi вы сумняваецеся, абярыце кансерватыўныя настройкi."
 
 #: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "Plug'n Play"
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Vendor"
-msgstr "Адкат"
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Reunion"
+msgstr "Памеры экрану"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Абярыце манiтор"
+msgid "Details"
+msgstr "Падрабязнасцi"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Вiдэакарта: %s"
+msgid "For security reasons, it will be disconnected now."
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Выбар памераў экрану i глыбiнi колеру"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "Памеры экрану"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Checking your system..."
+msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 мiлiярда колераў (24 бiты)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print"
+msgstr "Прынтэр"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 мiльёнаў колераў (24 бiты)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 тысяч колераў (16 бiтаў)"
+msgid "Mongolia"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 тысячы колераў (15 бiтаў)"
+msgid "Mounted\n"
+msgstr "Заманцiравана\n"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 колераў (8 бiтаў)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "Запуск X пры старце сiстэмы"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "Гэта дакладна?"
+msgid "Restore Users"
+msgstr "Аднаўленне з файлу"
 
-#: ../../Xconfig/test.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d секундаў"
+msgid "Encryption key for %s"
+msgstr "Паролi не супадаюць"
 
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
+"Portmapper (аглядальнiк партоў) кiруе RPC злучэннямi, якiя звычайна\n"
+"выкарыстоўваюцца такiмi пратаколамi як NFS i NIS. Portmap сервер павiнен "
+"выконвацца\n"
+"на машынах якiя працуюць як серверы для пратаколаў, якiя скарыстоўваюць RPC."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "Папярэджанне: тэсцiраванне на гэтай вiдэакарце небяспечна"
+msgid "Detected hardware"
+msgstr "Гл. апiсанне абсталявання"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+msgid "Mauritius"
+msgstr ""
 
-#: ../../Xconfig/test.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Праверка параметраў настройкi"
+msgid "Myanmar (Burmese)"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "Якi тып вашага ISDN злучэння?"
+msgid "Enabling swap partition %s"
+msgstr "Фарматаванне раздзелу %s"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
 msgstr ""
+"Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n"
+"ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Armenian (old)"
+msgstr "Армянскi (стары)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
 msgstr ""
-"Можна настроiць сiстэму для аўтаматычнага запуску X пасля старту сiстэмы.\n"
-"Жадаеце, каб X стартаваў пры рэстарце?"
 
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Graphical interface at startup"
-msgstr "Запуск X пры старце сiстэмы"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "Сервер XFree86: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "Сервер XFree86: %s\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "Манiтор"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Памеры экрану: %s\n"
+msgid "%s formatting of %s failed"
+msgstr "%s памылка фарматавання %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Параметры глыбiнi колеру: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Падрыхтоўка разделаў не ўдалася: %s"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Вiдэапамяць: %s Кб\n"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "Канадскi (Квебэк)"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics card: %s\n"
-msgstr "Вiдэакарта: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Раздзел %s"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Часціня верт.разг. манiтору: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Workstation"
+msgstr "Навуковыя прыкладанні"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Часціня гар.разг. манiтору: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Усталяванне пакету %s\n"
+"%d%%"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Манiтор: %s\n"
+msgid "Kyrgyzstan"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Mouse device: %s\n"
-msgstr "Мыш: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../Xconfig/various.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Тып мышы: %s\n"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron, перыядычны камандны планавальнiк."
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Тып клавiятуры: %s\n"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Вы павiнны мець каранёвы раздзел.\n"
+"Для гэтага стварыце раздзел (альбо адзначце ўжо iснуючы).\n"
+"Потым абярыце ``Кропка манцiравання'' i ўстанавiце яе ў `/'"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Опцыi: %s"
+msgid "Proxy should be http://..."
+msgstr "Proxy павiнен быць http://..."
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Mount point: "
-msgstr "Пункт манцiравання:"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "сервер"
+msgid "South Africa"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Western Sahara"
 msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount point"
-msgstr "Кропка манцiравання"
+msgid "Etherboot Floppy/ISO"
+msgstr "Стварыць загр. дыск"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Server"
-msgstr "сервер"
+msgid "Modify printer configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Mount"
-msgstr "Манцiраванне"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "Абярыце дзеянне"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Unmount"
-msgstr "Разманцiраваць"
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New"
-msgstr "РќРѕРІС‹"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "Выкарыстоўвайце ``%s'' замест"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "Тып"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Спачатку зрабiце ``Unmount''"
+msgid "Please test the mouse"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "Знiшчыць"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "Іншыя"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "Стварыць"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Тыпы файлавых сiстэмаў:"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Пуста"
+msgid "Sector"
+msgstr "Сектар"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Windows"
-msgstr "Навуковыя прыкладанні"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "Qatar"
+msgstr "Стартавае меню"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "LDAP Base dn"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Вы не можаце выбраць гэты пакет, таму як не хапае месца для яго ўсталявання"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "памылка манцiравання"
+msgid "generate auto-install floppy"
+msgstr "Стварэнне дыскеты для ўсталявання"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "Лакальны прынтэр"
+msgid "Dialing mode"
+msgstr "Рэжым злучэння"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Націсніце на раздзел"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+msgid "File sharing"
 msgstr ""
-"Зараз вы маеце толькi адзiн вялiкi раздзел FAT\n"
-"(які звычайна выкарыстоўвае MS Dos/Windows).\n"
-"Прапаную, па-першае, змянiць памеры раздзела\n"
-"(клiкнiце на яго, а потым на \"змяненне памераў\")"
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Абярыце дзеянне"
-
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Майстар стварэння"
+msgid "Clean /tmp at each boot"
+msgstr "Ачышчаць /tmp пры кожнай загрузцы"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+msgid "Malawi"
 msgstr ""
-"Калi вы плануеце выкарыстоўваць boot вобласць, тады размясцiце яе\n"
-" не далей за 2048 сектароў ад пачатку дыска"
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please make a backup of your data first"
-msgstr "Па-першае, зрабiце рэзервовую копiю вашых дадзеных"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your type of mouse."
+msgstr "калi ласка, пазначце тып вашай мышы."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Чытайце ўважлiва!"
+msgid "class of hardware device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Encryption key (again)"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Encryption key"
+msgid "United Kingdom"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "Паролi не супадаюць"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr ""
-"Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)"
+msgid "running"
+msgstr "Увага!"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Choose your filesystem encryption key"
-msgstr ""
+msgid "default"
+msgstr "Па дамаўленню"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "Тып файлавай сiстэмы:"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Тып: "
+msgid "Indonesia"
+msgstr "РЅСЏРјР°"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "на шыне %d id %d\n"
+msgid "France [SECAM]"
+msgstr "Францыя"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Тып таблiцы раздзелаў: %s\n"
+msgid "restrict"
+msgstr "абмежаванне"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-дыскi %s\n"
+msgid "must have"
+msgstr "павiнны мець"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Iнфармацыя: "
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Геаметрыя: %s цылiндраў, %s галовак, %s сектараў\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "Таблiца"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s\n"
-msgstr "Памер: %s\n"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Command line"
+msgstr "Iмя дамену"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "Read-only"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Device: "
-msgstr "Прылада:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "access to administrative files"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Iмя файлу вiртуальнай файлавай сiстэмы: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-дыскi %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Chunk size %s\n"
-msgstr "Памер фрагменту %s\n"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Узровень %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-"Загрузачны раздзел па дамаўленню\n"
-"    (для загрузкi MS-DOS, а не для lilo)\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Файл(ы) вiртуальнай файлавай сiстэмы: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "Заманцiравана\n"
+msgid "Montserrat"
+msgstr "Порт мышы"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Не адфарматавана\n"
+msgid "Automatic dependencies"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Formatted\n"
-msgstr "Фарматаванне\n"
+msgid "Swap"
+msgstr "Swap"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "Цылiндры з %d па %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s сектараў"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "Памер: %s"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Start: sector %s\n"
-msgstr "Пачатак: сектар %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Name: "
-msgstr "IРјСЏ: "
+msgid "Connecting to the Internet "
+msgstr "Далучэнне да Iнтэрнэту"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Лiтара для DOS-дыску: %s (наўгад)\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "Аднаўленне з файлу"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "partition %s is now known as %s"
+msgid "TV card"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Removing %s"
-msgstr "Памеры экрану: %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/Windows 95/98/NT"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Copying %s"
+msgid ", "
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid не працаздольны"
+msgid "Remove selected host/network"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "Не хапае прасторы для стварэння новых раздзелаў"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix -  гэта паштовы транспартны агент, праграма, якая\n"
+"перамяшчае пошту з адной машыны на йншую."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеные ў раздзеле %s будуць страчаны пасля фарматавання"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Каб змяненнi ўступiлi ў дзеянне, необходна перазагрузiцца"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Канфiгурацыя сеткi"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Таблiца размяшчэння прылады %s будзе запiсана на дыск!"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Restore From CD"
+msgstr "Аднаўленне з дыскеты"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "What type of partitioning?"
-msgstr "Якi тып друкаркi вы маеце?"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n"
+" Інтэрнэту (Internet Connection Sharing)?\n"
+"\n"
+"Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n"
+"\n"
+"Вы жадаеце усталяваць сумесны доступ да Internet?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Будзьце уважлiвы. Гэтую аперацыю нельга адмянiць"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr ""
+"Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для "
+"далучэння да iнтэрнэт"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "памер блоку"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "level"
-msgstr "узровень"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "прылада"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Various"
+msgid "if set to yes, verify checksum of the suid/sgid files."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "Опцыi модулю:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Файл ужо iснуе. Выкарыстаць яго?"
+msgid "Latin American"
+msgstr "Лацiна-Амерыканскi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr ""
-"Файл ужо выкарыстоўваецца iншай вiртуальнай сiстэмай. Калi ласка, \n"
-"абярыце iншую назву"
+msgid "Japanese text printing mode"
+msgstr "Настройка сеткi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Give a file name"
-msgstr "Уласнае iмя"
+msgid "Old device file"
+msgstr "Абярыце файл"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Тып файлавай сiстэмы:"
+msgid "Info: "
+msgstr "Iнфармацыя: "
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size in MB: "
-msgstr "Памер у Мб:"
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "Опцыi: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Iмя вiртуальнага раздзелу"
+msgid "Please wait"
+msgstr "Калi ласка, пачакайце"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Loopback"
-msgstr "Вiртуальная файлавая сiстэма (loopback)"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Гэты раздзел не можа быць выкарыстаны пад вiртуальную файлавую сiстэму"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Зроблена"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Гэта дакладна?"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "LVM name?"
+msgid "Ethernet Card"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "new"
-msgstr "РЅРѕРІС‹"
+msgid "Info"
+msgstr "Iнфармацыя"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Выбярыце iснуючы LVM для дабаўлення"
+msgid "Install"
+msgstr "Усталёўка"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Абярыце iснуючы RAID для дадання"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Націсніце \"Так\", калі жадаеце выдаліць усе дадзеныя\n"
+"і раздзелы на гэтым дыску. Будзце уважлівыя, пасля гэтай аперацыі вы не\n"
+"\n"
+"здолееце аднавіць любыя дадзеныя і раздзелы, улічваючы і дадзеныя Windows\n"
+"\n"
+"\n"
+"Націсніце \"Адмена\" каб адмяніць аперацыю без страты дадзеных і раздзелаў"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Пераносіцца раздзел..."
+msgid "Exit install"
+msgstr "Заканчэнне ўсталявання"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Moving"
-msgstr "Пераносім"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"Усе адканфігуравана.\n"
+"Зараз вы можаце сумесна выкарыстоўваць падключэнне да Internet\n"
+"з іншымі камп'ютэрамі ў  вашай ЛВС, карыстаючыся аўтаматычным\n"
+"канфігураваннем (DHCP)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "На якi сектар перанесці?"
+msgid "Remote CUPS server"
+msgstr "Аддалены сервер CUPS"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Сектар"
+msgid "Sun - Mouse"
+msgstr "Sun - Мыш"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "На якi дыск перанесці?"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Move"
-msgstr "Перанос"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "Выдалiць з сiстэмы"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "Памер у Мб:"
+msgid "Ethiopia"
+msgstr "Эстонскi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Выбар новых памераў"
+msgid "Devanagari"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Resize"
-msgstr "Змяненне памераў"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны"
+msgid "Total size: %d / %d MB"
+msgstr "Агульны памер: %d / %d Mб"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Усе дадзеныя ў гэтым раздзеле павiнны быць зархiваваныя"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "Таблiца"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "This partition is not resizeable"
-msgstr "Памеры якога раздзела вы жадаеце змянiць?"
+msgid "Search for new scanners"
+msgstr "Даступныя пакеты"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Падлік межаў файлавай сiстэмы FAT"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Disabling servers..."
+msgstr "Вызначэнне прыладаў..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Куды вы жадаеце манцiраваць прыладу %s?"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Усталяванне %s не атрымалася. Узнiкла наступная памылка:"
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr ""
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
 msgstr ""
-"Нельга ўсталяваць пункт манцiравання, таму што раздел выкарыстоўваецца для\n"
-"вiртуальнай файлавай сiстэмы.\n"
-"Спачатку выдалiце вiртуальную сiстэму"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Куды вы жадаеце манцiраваць прыладу %s?"
+msgid "Network printer (TCP/Socket)"
+msgstr "Сеткавы прынтэр (TCP/Socket)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Куды вы жадаеце манцiраваць вiртуальную прыладу %s?"
+msgid "Backup User files..."
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "Install system"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Which filesystem do you want?"
-msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Change partition type"
-msgstr "Змянiць тып раздзелу"
+msgid "First DNS Server (optional)"
+msgstr "Першы сервер DNS"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу"
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "Фарматаванне вiртуальнага раздзелу %s"
+msgid "dhcpd Config..."
+msgstr "Настройка IDE"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "The setup has already been done, but it's currently disabled."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "Параметры: "
+msgid "LILO/grub Installation"
+msgstr "Усталяванне LILO/GRUB"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Start sector: "
-msgstr "Пачатковы сектар:"
+msgid "Israeli"
+msgstr "Iўрыт"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create a new partition"
-msgstr "Стварэнне новага раздзелу"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "load setting"
+msgstr "фарматаванне"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Use for loopback"
-msgstr "Выкарыстоўваць для вiртуальнай файлавай сiстэмы"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Адлучэнне ад сеткi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Modify RAID"
-msgstr "Змянiць RAID"
+msgid "Floppy can be removed now"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "Выдалiць з LVM"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Выдалiць з сiстэмы"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Выдалiць з RAID"
+msgid "Denmark"
+msgstr ""
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Add to LVM"
-msgstr "Дадаць да LVM"
+msgid "Moving partition..."
+msgstr "Пераносіцца раздзел..."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "Дадаць да RAID"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "(This) DHCP Server IP"
+msgstr "IP сервера SMB"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Format"
-msgstr "Фарматаванне"
+msgid "Test of the configuration"
+msgstr "Праверка параметраў настройкi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Detailed information"
-msgstr "Iнфармацыя"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Trying to rescue partition table"
-msgstr "Паспрабуем выратаваць таблiцу раздзелаў"
+msgid "Installing %s ..."
+msgstr "Усталяванне пакету %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"Устаўце дыскету ў дыскавод\n"
-"Усе дадзеныя на гэтай дыскеце будуць страчаны"
-
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Warning"
-msgstr "Увага!"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Select file"
-msgstr "Абярыце файл"
+msgid "Choose your filesystem encryption key"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
 msgstr ""
-"Таблiца размяшчэння рэзервовага дыску мае iншы памер\n"
-"Працягваць далей?"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Removable media automounting"
-msgstr "Аўтаманцiраванне зменных назапашвальнікаў"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "Дадатковая таблiца раздзелаў"
+msgid "Andorra"
+msgstr "Адкат"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Дадатковая таблiца раздзелаў"
+msgid "Sierra Leone"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "Дадатковая таблiца раздзелаў"
+msgid "Botswana"
+msgstr "Эстонскi"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Save partition table"
-msgstr "Запiс таблiцы раздзелаў"
+msgid "(default value: %s)"
+msgstr " ? (змоўчанне %s) "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+msgid "Alternative test page (Letter)"
 msgstr ""
-"Каб зрабiць больш разделаў, выдалiце адзiн i стварыце пашыраны раздзел "
-"(extended)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Дадаць раздзел немагчыма"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Усе першасныя раздзелы выкарыстаны"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "Iнфармацыя"
+msgid "Choose an X server"
+msgstr "Абярыце X сервер"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Размеркаваць аўтаматычна"
+msgid "Swap partition size in MB: "
+msgstr "Памер swap раздзелу ў Mб:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Clear all"
-msgstr "Ачысцiць усё"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+msgid "No changes to backup!"
+msgstr "Дрэнны файл рэзервовай копii"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Выйсцi без запiсу таблiцы раздзелаў"
+msgid "Formatted\n"
+msgstr "Фарматаванне\n"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Выйсцi без захавання"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Type of install"
+msgstr "Выбар пакетаў для усталявання"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "Сапраўды працягваць?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Рэжым эксперту"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "Звычайны рэжым"
+msgid "%d comma separated numbers"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Undo"
-msgstr "Адкат"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "Абярыце дзеянне"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "Стварэнне новага раздзелу"
-
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "Змянiць тып раздзелу"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "DNS сервер"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "NIS Domain"
+msgid ""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
+msgstr ""
+"Пратакол rusers дазваляе карыстальнiкам сеткi вызначаць, хто\n"
+"ўвайшоў i працуе на машынах ў сетцы."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Username"
-msgstr "Iмя карыстальнiку:"
+msgid "Automatic Steps Configuration"
+msgstr "Настройка мадэму"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
 msgid ""
-"Please enter your username, password and domain name to access this host."
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "Аўтэнтыфiкацыя"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "цiкава"
+#: ../../lang.pm:1
+#, c-format
+msgid "Barbados"
+msgstr ""
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Which username"
-msgstr "Iмя карыстальнiку:"
+msgid "Please select data to backup..."
+msgstr "Калi ласка, абярыце мову для карыстання."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "cpu # "
+msgid "received"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "SMBus controllers"
+msgid "/File/_New"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The DNS Server IP"
+msgstr "IP сервера SMB"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "USB controllers"
+msgid "IP Range End:"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr ""
+msgid "High"
+msgstr "Высокi"
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid "NoVideo"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "this field describes the device"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Joystick"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Scanner"
-msgstr "Абярыце вiдэакарту"
+msgid "Local Printers"
+msgstr "Лакальны прынтэр"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Агульны"
+msgid "Installation image directory"
+msgstr "Заканчэнне настройкi"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "NIS Server"
+msgstr "NIS сервер:"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Modem"
-msgstr "Порт мышы"
+msgid "Port: %s"
+msgstr "РџРѕСЂС‚"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "цiкава"
+msgid "Spain"
+msgstr "Iспанскi"
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Processors"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "Гэта iмя карыстальнiку ўжо дададзена"
 
-#: ../../harddrake/data.pm:1
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a file"
+msgstr "Абярыце дзеянне"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Apply"
+msgstr "Применить"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Стандартны"
+msgid "Auto-detect available ports"
+msgstr "Аддалены прынтэр"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "Іншыя"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tvcard"
+msgid "San Marino"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Videocard"
-msgstr "Вiдэа-рэжым"
+msgid "Belgium"
+msgstr "Бельгiйскi"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Tape"
-msgstr "Тып: "
+msgid "Kuwait"
+msgstr "Выхад"
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "DVD-ROM"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "Абярыце мэнэджар вокнаў:"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "CD/DVD burners"
+msgid "sub generation of the cpu"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "CDROM"
+msgid "First Time Wizard"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Disk"
-msgstr "Дацкi"
+#: ../../install_steps.pm:1
+#, c-format
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"Узнiкла памылка, якую не атрымліваецца карэктна апрацаваць,\n"
+"таму працягвайце на сваю рызыку."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Zip"
+msgid "please wait, parsing file: %s"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Floppy"
-msgstr "Захаванне на дыскету"
+msgid "Taiwan"
+msgstr "Размеркаванне"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Let me pick any driver"
+msgid "Pakistan"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Driver:"
-msgstr "сервер"
-
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "Версiя: %s\n"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "Iмя правайдару, напрыклад правайдар.net"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
-msgstr ""
+msgid "Version: %s\n"
+msgstr "Версiя: %s\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Sound trouble shooting"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
 msgstr ""
+"У Вашай сiстэме маецца недахоп рэсурсаў, таму магчымы праблемы\n"
+"пры ўсталяваннi Mandrake Linux. У гэтым выпадку паспрабуйце тэкставую\n"
+"праграму ўсталявання. Для гэтага нацiснiце `F1' у час загрузкi, а потым\n"
+"набярыце `text' i нацiснiце <ENTER>."
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "Выкарыстоўваць раздзел Windows для вiртуальнай файлавай сiстэмы"
 
-#: ../../harddrake/sound.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Unkown driver"
-msgstr ""
+msgid "Armenian (typewriter)"
+msgstr "РђСЂРјСЏРЅСЃРєi (typewriter)"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection type: "
+msgstr "Iмя злучэння"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "Запуск X пры старце сiстэмы"
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s з падтрымкай 3D-паскарэння"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "Iранскi"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "No known driver"
+msgid "Chad"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovakia"
+msgstr "Славенскi"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+msgid "Singapore"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No open source driver"
+msgid "Cambodia"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Праверка параметраў настройкi"
-
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
+msgid "Monitor HorizSync: %s\n"
+msgstr "Часціня гар.разг. манiтору: %s\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Trouble shooting"
+msgid "Path"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
 "\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
 "\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "Настройка"
+msgid "Add host"
+msgstr "Дадаць карыстальнiка"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "No alternative driver"
+msgid ""
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "enable radio support"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Radio support:"
+msgid "China (broadcast)"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "фарматаванне"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Number of capture buffers:"
-msgstr ""
+msgid "Use quota for backup files."
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "Змянiць тып раздзелу"
+msgid "Configuring printer \"%s\"..."
+msgstr "Настройка прынтэру"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Card model:"
-msgstr "Адрасы памяці карты (DMA)"
+msgid "Internet connection"
+msgstr "Сумеснае Iнтэрнэт-злучэнне"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
+"Загрузка модулю %s не прайшла.\n"
+"Жадаеце паспрабаваць з iншымi параметрамi?"
 
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Агульны"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "Welcome to the Open Source world."
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "Bosnia and Herzegovina"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "Аддалены прынтэр"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr ""
+"Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n"
+"для гэтай кропкi манцiравання\n"
 
-#: ../../interactive/newt.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Do"
-msgstr "Зроблена"
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
 
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Ваш выбар? (змоўчанне %s) "
+msgid "Netherlands"
+msgstr ""
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "Дрэнны выбар, паспрабуйце яшче\n"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Захаванне ў файл"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Internal ISDN card"
+msgstr "Унутраная ISDN карта"
 
-#: ../../interactive/stdio.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Таблiца"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
+msgid "Install & convert Fonts"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Ваш выбар? (змоўчанне %s) "
-
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid " enter `void' for void entry"
+msgid "WARNING"
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "Вы жадаеце выкарыстоўваць aboot?"
-
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "Опцыi: %s"
+msgid "Installing bootloader"
+msgstr "Усталяванне загрузчыку"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Ваш выбар? (змоўчанне %s) "
+msgid "replay"
+msgstr "Перазагрузiць"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+msgid "detected %s"
 msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Virgin Islands (U.S.)"
 msgstr ""
-"Загрузка модулю %s не прайшла.\n"
-"Жадаеце паспрабаваць з iншымi параметрамi?"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "Пазначце параметры"
-
-#: ../../modules/interactive.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Аўтапошук"
+msgid "Bad backup file"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"У некаторых выпадках %s драйверу патрэбна некаторая дадатковая iнфармацыя,\n"
-"але звычайна гэта не патрабуецца. Цi не жадаеце вы задаць для яго\n"
-"дадатковыя опцыi, цi дазволiце драйверу пратэсцiраваць машыну\n"
-"ў пошуках неабходнай iнфармацыi? Магчыма, тэсцiраванне прывядзе\n"
-"да спынення камп'ютэру, але яно нiчога не сапсуе."
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Which %s driver should I try?"
-msgstr "Якi драйвер %s паспрабаваць?"
-
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Module options:"
-msgstr "Опцыi модулю:"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Pipe into command"
 msgstr ""
-"Вы не можаце задаць опцыi модулю %s.\n"
-"Опцыi - у фармаце ``iмя=значэнне iмя2=значэнне2 ...''.\n"
-"Напрыклад, ``io=0x300 irq=7''"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
 msgstr ""
+"Пэўнае абсталяванне патрабуе камерцыйных драйвераў для працы.\n"
+"Часткова інфармацыю пра іх можна атрымаць тут: %s"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(модуль %s)"
-
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Усталяванне драйверу для %s карты %s"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "See hardware info"
-msgstr "Гл. апiсанне абсталявання"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Цi ёсць у вас %s iнтэрфейс?"
-
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have another one?"
-msgstr "Цi ёсць у вас iншы?"
-
-#: ../../modules/interactive.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Знойдзены %s %s iнтэрфейсы"
+msgid "Detecting devices..."
+msgstr "Вызначэнне прыладаў..."
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "You can configure each parameter of the module here."
+msgid "Click here to launch the wizard ->"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
-#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "Фарматаванне раздзелаў"
-
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "comma separated numbers"
+msgid "Haiti"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Description of the fields:\n"
+"\n"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "%d comma separated numbers"
+msgid "the name of the CPU"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "a number"
-msgstr "Нумар тэлефону"
+msgid "Refreshing printer data..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
 
-#: ../../network/adsl.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "You must also format %s"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "Будзьце уважлiвы. Гэтую аперацыю нельга адмянiць"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Далучэнне да Iнтэрнэту"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr ""
+#: ../../diskdrake/dav.pm:1
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "сервер"
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "Alcatel speedtouch usb"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "Настройкi ўзроўня бяспекi"
 
-#: ../../network/adsl.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "Гл."
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "use dhcp"
+msgid "Use Expect for SSH"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "use pptp"
-msgstr "выкарыстоўваць pppoe"
+msgid "Poland"
+msgstr "Iсландскi"
 
-#: ../../network/adsl.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "выкарыстоўваць pppoe"
+msgid "Importance: %s\n"
+msgstr "Значнасць: %s\n"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Other ports"
-msgstr "Iншыя краiны"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "Выбар пакетаў для ўсталявання"
 
 #: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Everything (no firewall)"
-msgstr "Ўсё сканфiгуравана!"
+msgid "Other ports"
+msgstr "Iншыя краiны"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "number of capture buffers for mmap'ed capture"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+msgid "SMBus controllers"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "Iмя злучэння"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "сеткавая карта не знойдзена"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "сервер"
-
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "Сервер друку"
+msgid "Croatian"
+msgstr "Харвацкi"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "Iмя дамену"
+msgid "Use existing partition"
+msgstr "Выкарыстоўваць iснуючы раздзел"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Web Server"
-msgstr "сервер"
+msgid "Unable to contact mirror %s"
+msgstr "Зрабiць неактыўным сеткавае злучэнне"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "/Help/_About..."
 msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Host name"
-msgstr "Iмя машыны"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Iмя машыны"
+msgid "Remove user directories before restore."
+msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Настройка сеткi"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../network/ethernet.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
+msgid "could not find any font in your mounted partitions"
 msgstr ""
-"Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для "
-"далучэння да iнтэрнэт"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Пазначце сеткавы iнтэрфейс"
-
-#: ../../network/ethernet.pm:1
-#, fuzzy, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "F00f bug"
 msgstr ""
-"Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, "
-"скарыстайце канфiгурацыйны iнструмэнт."
+
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s"
+msgstr "Сервер XFree86 %s"
 
 #: ../../network/ethernet.pm:1
 #, c-format
@@ -8446,1746 +8291,1690 @@ msgstr ""
 "Якi dhcp клiент вы плануеце выкарыстоўваць?\n"
 "Па змоўчанню, гэта dhcp-client"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Карта ISDN PCI не знойдзена. Калi ласка, пазначце на наступным экране."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr ""
-"Вызначана ISDN PCI карта, але невядомы яе тып. Калi ласка, пазначце PCI "
-"карту на наступным экране."
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Якая ў вас ISDN карта?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Настройка ISDN"
+msgid "Domain Name:"
+msgstr "Iмя дамену"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Адмянiць"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "On Floppy"
+msgstr "Захаванне на дыскету"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Працягнуць"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "Аднаўленне з файлу"
 
-#: ../../network/isdn.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
-"\n"
-"Калi вы маеце ISA карту, велiчынi на наступным экране павiнны быць "
-"сапраўднымi.\n"
-"\n"
-"Калi вы маеце PCMCIA карту, вы павiнны ведаць irq i io вашай карты.\n"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "I don't know"
-msgstr "РќРµ РІСЏРґРѕРјР°"
+msgid "Looking for available packages..."
+msgstr "Прагляд даступных пакетаў"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Init Message"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Rescue partition table"
+msgstr "Дадатковая таблiца раздзелаў"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "What kind of card do you have?"
-msgstr "Якi тып карты вы маеце?"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "Iмя злучэння"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "Cyprus"
 msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Якi пратакол вы жадаеце выкарыстоўваць?"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Падключэнне"
+msgid "Remove from RAID"
+msgstr "Выдалiць з RAID"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr ""
-"Падключэнне \n"
-" не праз D-канал (вылучаныя каналы)"
+"Гэты пароль занадта просты (яго даўжыня павiнна быць не меней за %d лiтараў)"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "European protocol"
-msgstr "Еўропа (EDSS1)"
+msgid "Configuration Wizards"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Еўропа (EDSS1)"
+msgid "ISDN connection"
+msgstr "Настройка ISDN"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "primary"
 msgstr ""
-"Абярыце вашага правайдара.\n"
-"калi яго няма ў гэтым спiсе, абярыце тып ``Iншы''"
 
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "External ISDN modem"
-msgstr "Унутраная ISDN карта"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Унутраная ISDN карта"
-
-#: ../../network/isdn.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Якi тып вашага ISDN злучэння?"
-
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Network Configuration Wizard"
-msgstr "Канфiгурацыя сеткi"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Which ISDN configuration do you prefer?\n"
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
 "\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
 "\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
 "\n"
-"We recommand the light configuration.\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
 msgstr ""
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "Чакаецца"
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Skip"
+msgstr "Прапусцiць"
 
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Install rpm"
-msgstr "Усталёўка"
+msgid "Niue"
+msgstr "гальштук"
 
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
+"Актывiзаваць/дэактывiзаваць усе сеткавыя iнтэрфейсы, сканфiгураваныя для\n"
+"старту пры загрузцы сiстэмы."
 
-#: ../../network/modem.pm:1
-#, fuzzy, c-format
-msgid "Title"
-msgstr "Таблiца"
-
-#: ../../network/modem.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Другi сервер DNS:"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "First DNS Server (optional)"
-msgstr "Першы сервер DNS"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Domain name"
-msgstr "Iмя дамену"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "CHAP"
-msgstr "CHAP"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Script-based"
-msgstr "на аснове скрыпту"
+msgid "important"
+msgstr "важна"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Terminal-based"
-msgstr "на аснове тэрмiналу"
+msgid "Total Progress"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "IРјСЏ (login ID)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Users"
+msgstr "Iмя карыстальнiку:"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "Нумар тэлефону"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Aruba"
+msgstr "Grub"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Connection name"
-msgstr "Iмя злучэння"
+msgid "Preparing bootloader..."
+msgstr "Падрыхтоўка загрузчыка"
 
-#: ../../network/modem.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Dialup options"
-msgstr "Параметры камутаванага злучэння (Dialup)"
+msgid "Gateway (e.g. %s)"
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
+msgid "The passwords do not match"
+msgstr "Паролi не супадаюць"
 
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Network Configuration"
-msgstr "Канфiгурацыя сеткi"
+msgid "Examples for correct IPs:\n"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "Frequency (MHz)"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+msgid "the number of the processor"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+msgid "Hardware clock set to GMT"
+msgstr "Ваш сiстэмны гадзiннiк усталяваны на GMT?"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Give a file name"
+msgstr "Уласнае iмя"
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Network configuration"
-msgstr "Канфiгурацыя сеткi"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Да якога паслядоўнага порту далучаны мадэм?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/livedrake:1
 #, fuzzy, c-format
-msgid "Internet connection"
-msgstr "Сумеснае Iнтэрнэт-злучэнне"
+msgid "Change Cd-Rom"
+msgstr "Змянiць памеры экрану"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "Paraguay"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Абярыце iнструмент, якi жадаеце скарыстаць"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "ethernet card(s) detected"
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "LAN connection"
-msgstr "Размеркаванне"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "Злучэнне прынтэру"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Cable connection"
-msgstr "Злучэнне прынтэру"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "Аддалены прынтэр"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "Размеркаванне"
-
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "detected %s"
+msgid "There's no known driver for your sound card (%s)"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "ISDN connection"
-msgstr "Настройка ISDN"
+msgid "force"
+msgstr "Перанос"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "Злучэнне прынтэру"
+msgid "Exit"
+msgstr "Ext2"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected on port %s"
-msgstr "Дубляванне пункту манцiравання %s"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Normal modem connection"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Вызначэнне прыладаў..."
+msgid "Estonian"
+msgstr "Эстонскi"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Mode"
-msgstr "Эксперт"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr ""
+"Apache - гэта World Wide Web сервер. Ён выкарыстоўзваеца для абслугоўвання\n"
+"HTML файлаў i CGI."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Use auto detection"
+msgid "Add/Del Clients"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the profile to configure"
-msgstr "Абярыце асноўнага карыстальнiка:"
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid "Choose the network interface"
+msgstr "Пазначце сеткавы iнтэрфейс"
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgid "Unknown Model"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "CD/DVD burners"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
 msgid ""
-"\n"
-"\n"
-"\n"
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press OK to continue."
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
 msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
+"Загрузачны раздзел па дамаўленню\n"
+"    (для загрузкi MS-DOS, а не для lilo)\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
+msgid "choose image"
+msgstr "Абярыце дзеянне"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Internet connection & configuration"
-msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "Настройка сеткi"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Disconnect"
-msgstr "Настройка ISDN"
+msgid "Firewalling configuration detected!"
+msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Connect"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
 msgstr "Iмя злучэння"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: ../../standalone/draksplash:1
+#, c-format
 msgid ""
-"\n"
-"You can reconfigure your connection."
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
+msgid "Updating package selection"
+msgstr "Асабiсты выбар пакетаў"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Куды вы жадаеце манцiраваць вiртуальную прыладу %s?"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
 msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
+msgid "the number of buttons the mouse has"
+msgstr "2 РєРЅРѕРїРєi"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
 msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "You are currently connected to the Internet."
-msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
+msgid "Replay"
+msgstr "Перазагрузiць"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "Proxy павiнен быць http://..."
+msgid "Backup other files"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../network/network.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy павiнен быць http://..."
+msgid "No floppy drive available"
+msgstr "Дыскавод недаступны"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Backup files are corrupted"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "TV norm:"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "Настройка proxy кэшуючых сервераў"
+msgid "Cpuid family"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "32 MB"
+msgstr "32 РњР±"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (new)"
+msgstr "Лiтоўскi AZERTY (новы)"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Gateway device"
-msgstr "Прылада-шлюз"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Вы абралi RAID раздзел як каранёвы.\n"
+"Няма загрузчыку, якi б загрузiўся без /boot раздзела.\n"
+"Дадайце раздел /boot, калi ласка."
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Gateway (e.g. %s)"
+msgid "Previous"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS сервер"
+msgid "Other OS (MacOS...)"
+msgstr "Iншая АС (MacOS,...)"
 
-#: ../../network/network.pm:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "To activate the mouse,"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+
+#: ../../install_interactive.pm:1
 #, c-format
+msgid "Bringing up the network"
+msgstr "Далучэнне да сеткi"
+
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
 msgstr ""
-"Увядзiце iмя сваёй машыны (host).\n"
-"Iмя вашай машыны павiнна быць зададзена поўнасцю,\n"
-"напрыклад ``mybox.mylab.myco.com''.\n"
-"Вы можаце таксама ўвесцi IP адрас шлюзу, калi ён у вас ёсць."
+"На вашым дыску было знойдзена болей за адзін раздзел\n"
+"Windows. Калі ласка, абярыце той, памер якога жадаеце змяніць, "
+"кабусталяваць\n"
+"сістэму Mandrake Linux.\n"
+"\n"
+"\n"
+"Для iфармацыі, кожны раздзел адзначаны як: \"Linux імя\", \"Windows\n"
+"імя\" \"Cвойствы\".\n"
+"\"Linux Імя\" кадавана так - \"тып дыску\", \"нумар дыску\",\"нумар "
+"раздзелу\n"
+"(напрыклад, \"hda1\").\n"
+"\n"
+"\n"
+"\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n"
+"\n"
+"\"Нумар дыску\" - сімвал пасля \"hd\" ці \"sd\". Для IDE дыскаў:\n"
+"   * \"а\" \"master\" на першасным канале IDE \n"
+"   * \"b\" \"slave\" на першасным канале IDE\n"
+"   * \"c\" \"master\" на другасным канале IDE\n"
+"   * \"d\" \"slave\" на другасным канале IDE\n"
+"\n"
+"\n"
+"Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны "
+"жорскі дыск\", і г.д.\n"
+"\n"
+"\"Windows Імя\" сімвал вашага дыску ў Windows (першы дыск ці\n"
+"раздзел пазначаецца як \"C:\")."
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Tanzania"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "Падлік межаў файлавай сiстэмы FAT"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"\n"
+"Backup Sources: \n"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
+msgid "Content of the file"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Start at boot"
-msgstr "Стварыць загр. дыск"
+msgid "Authentication LDAP"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Let me pick any driver"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Канфiгурацыя сеткi"
+msgid "Profile "
+msgstr "памылка манцiравання: "
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
+msgid "transmitted"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Iмя машыны"
+msgid "Palestine"
+msgstr "Асабiсты выбар пакетаў"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Netmask"
-msgstr "Маска сеткi"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "IP address"
-msgstr "IP адрас"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "%d comma separated strings"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Аўтаматычны IP"
+msgid "Here is the full list of keyboards available"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid " (driver %s)"
-msgstr "Сервер XFree86: %s\n"
+msgid "Theme name"
+msgstr "Iмя для размеркаванага рэсурсу"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Настройка сеткавай прылады %s"
+msgid "/_Help"
+msgstr "/_Дапамога"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
-"Калi ласка, увядзiце IP канфiгурацыю для вашай машыны.\n"
-"Кожны пункт павiнен быць запоўнены як IP адрас ў дзесяткова-кропкавай \n"
-"натацыi (напрыклад, 1.2.3.4)."
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "the width of the progress bar"
 msgstr ""
 
-#: ../../network/shorewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cook Islands"
 msgstr ""
-"Увага! Знойдзена існуючая сiстэма сеткавай бяспекi (firewall). Вам магчыма "
-"спатрэбіцца скарэктаваць яе пасля ўсталявання."
 
-#: ../../network/shorewall.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Знойдзена сістэма сеткавай бяспекі (firewall)!"
+msgid "Formatting partition %s"
+msgstr "Фарматаванне раздзелу %s"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "Iмя машыны"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Account Password"
-msgstr "Пароль для ўваходу"
+msgid "Unselect fonts installed"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Iмя для ўваходу (iмя карыстальнiку)"
+msgid "Cancel"
+msgstr "Адмена"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Iмя злучэння"
+msgid "Searching for configured scanners ..."
+msgstr "Даступныя пакеты"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Wheel"
+msgstr "З колам"
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Connection speed"
-msgstr "Iмя злучэння"
+msgid "Videocard"
+msgstr "Вiдэа-рэжым"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Рэжым злучэння"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Choose your country"
-msgstr "Выбар клавiятуры"
+msgid "Remove Selected"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "DNS 2 правайдару"
+msgid "/Autodetect _modems"
+msgstr "Аддалены прынтэр"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "DNS 1 правайдару"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "Нумар тэлефону правайдара"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Iмя правайдару, напрыклад правайдар.net"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Your personal phone number"
-msgstr "Ваш асабiсты тэлефонны нумар"
-
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "IO_1 карты"
+msgid "Remove printer"
+msgstr "Аддалены прынтэр"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_0"
-msgstr "IO_0 карты"
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
+msgstr ""
+"УВАГА!\n"
+"\n"
+"DrakX зараз павiнен змянiць памер вашага раздзела Windows.\n"
+"Будзьце ўважлiвы: гэтая аперацыя небяспечна. Калi вы  яшчэ не зрабiлi \n"
+"рэзервовую копiю дадзеных, то спачатку пакiньце праграму ўсталявання,"
+"выканайце scandisk i defrag на гэтым разделе, зрабiце рэзервовую копiю\n"
+"дадзеных i толькi потым зноў вярнiцеся да праграмы ўсталявання.\n"
+"Калi падрыхтавалiся, нацiснiце Ok."
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Card IO"
-msgstr "IO карты"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Адрасы памяці карты (DMA)"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Card IRQ"
-msgstr "IRQ карты"
+msgid "Other"
+msgstr "Іншыя"
 
-#: ../../network/tools.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "Калi ласка, запоўнiце цi пазначце поле нiжэй"
+msgid "Default"
+msgstr "Па дамаўленню"
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Настройка далучэння да Iнтэрнэту"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "Button 2 Emulation"
 msgstr ""
-"\n"
-"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "For security reasons, it will be disconnected now."
+msgid "type1inst building"
 msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
+msgid "Abiword"
+msgstr "Адмянiць"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Testing your connection..."
-msgstr "Якi тып вашага ISDN злучэння?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Цi жадаеце зараз паспрабаваць далучыцца да Iнтэрнэту?"
-
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Internet configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
-
-#: ../../partition_table/raw.pm:1
-#, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
-msgstr ""
+msgid "choose image file"
+msgstr "Абярыце дзеянне"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (Па дамаўленню)"
+msgid "X server"
+msgstr "X сервер"
 
-#: ../../printer/cups.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "IP сервера SMB"
+msgid "Domain Admin User Name"
+msgstr "Iмя дамену"
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "Аддалены прынтэр"
-
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
-#, c-format
-msgid "CUPS"
-msgstr ""
+msgid "There was an error while scanning for TV channels"
+msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
 
-#: ../../printer/cups.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "US клавiятура (мiжнародная)"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(модуль %s)"
+msgid "Not installed"
+msgstr "Заканчэнне ўсталявання"
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "LAN connection"
+msgstr "Размеркаванне"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "LPRng"
+msgid "/File/-"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPRng - LPR New Generation"
-msgstr ""
+msgid "Italian"
+msgstr "Iтальянскi"
 
-#: ../../printer/data.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "LPD"
-msgstr ""
+msgid "Basic"
+msgstr "Простые"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "PDQ"
+msgid "Honduras"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
+msgid "pdq"
 msgstr ""
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Unknown Model"
-msgstr ""
+msgid "Card IO"
+msgstr "IO карты"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Unknown model"
+msgid "when checked, owner and group won't be changed"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "РџРѕСЂС‚"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "Iмя машыны"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Сетка:"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Сеткавы iнтэрфейс"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "сеткавая карта не знойдзена"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ", using command %s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "\t-Network by FTP.\n"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Russian (Yawerty)"
+msgstr "Р СѓСЃРєi (РЇ-Р’-Р•-Р -Рў-Р�)"
 
-#: ../../printer/main.pm:1
-#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "You must enter a device or file name!"
+msgstr "URI прынтэру"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "Памылка запiсу ў файл %s"
+msgid "/_Quit"
+msgstr "Выхад"
 
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ", multi-function device"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "Вiдэапамяць: %s Кб\n"
 
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ", multi-function device on USB"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid "access to compilation tools"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ", USB printer"
-msgstr "Iмя друкаркi"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", USB printer \\#%s"
-msgstr ""
+msgid "Please select data to restore..."
+msgstr "Калi ласка, абярыце мову для карыстання."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
 msgstr ""
+"Калi вы плануеце выкарыстоўваць boot вобласць, тады размясцiце яе\n"
+" не далей за 2048 сектароў ад пачатку дыска"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Local Printers"
-msgstr "Лакальны прынтэр"
+msgid "Standard test page"
+msgstr "Стандартны"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Pipe job into a command"
-msgstr ""
+msgid "Create"
+msgstr "Стварыць"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "URI прынтэру"
+msgid "What"
+msgstr "Чакайце"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "Сервер друку"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/Windows 95/98/NT"
-
-#: ../../printer/main.pm:1
-#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
+msgid "Bulgarian (BDS)"
+msgstr "Балгарскi"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "Аддалены сервер lpd"
+msgid "Disable Server"
+msgstr "Сервер друку"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Аддалены сервер CUPS"
+msgid "Filesystem encryption key"
+msgstr "Тып файлавай сiстэмы:"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Remote printer"
-msgstr "Аддалены прынтэр"
+msgid "Gujarati"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Лакальны прынтэр"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "Настройка прынтэру"
+msgid "Save theme"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "Прынтэр"
+msgid "group"
+msgstr "Працоўная група"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Brazil"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+msgid "Auto Install"
+msgstr "Усталёўка"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Remove printer"
-msgstr "Аддалены прынтэр"
+msgid "Network Configuration Wizard"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+msgid "Removable media automounting"
+msgstr "Аўтаманцiраванне зменных назапашвальнікаў"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Print test pages"
-msgstr "Друк тэставых старонак"
+msgid "Printing"
+msgstr "Прынтэр"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"There are no printers found which are directly connected to your machine"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "Стварэнне новага раздзелу"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "сервер"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgid "unknown"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+msgid "Use fdisk"
+msgstr "Выкарыстоўваць fdisk"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "MOVE YOUR WHEEL!"
+msgstr "Рушце колам мышы!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "sent: "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "Лакальны прынтэр"
+msgid "Automatic IP"
+msgstr "Аўтаматычны IP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Set this printer as the default"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Опцыi прынтэру"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer manufacturer, model"
-msgstr ""
+#, fuzzy, c-format
+msgid "Configuration of a remote printer"
+msgstr "Настройка прынтэру"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
+msgid "Moldova"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "Злучэнне прынтэру"
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "Сумеснае Iнтэрнэт-злучэнне"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "Proxy павiнен быць http://..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
 msgstr "Iмя друкаркi"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "Порт мышы"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../modules/interactive.pm:1
+#, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "Цi жадаеце пратэсцiраваць настройкi?"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Вы не можаце задаць опцыi модулю %s.\n"
+"Опцыi - у фармаце ``iмя=значэнне iмя2=значэнне2 ...''.\n"
+"Напрыклад, ``io=0x300 irq=7''"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "Выйсцi без запiсу таблiцы раздзелаў"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "Iмя друкаркi"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Normal Mode"
-msgstr "Звычайны"
+msgid "Installing packages..."
+msgstr "Усталяванне пакету %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dutch"
+msgstr "Галандскi"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "Настройка сеткi"
+msgid "The following packages need to be installed:\n"
+msgstr "Наступныя пакеты будуць даданы да сiстэмы"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr ""
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "Настройка"
+msgid "service setting"
+msgstr "прылада"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgid "Custom"
+msgstr "Па выбару"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
 msgstr ""
+"Файл ужо выкарыстоўваецца iншай вiртуальнай сiстэмай. Калi ласка, \n"
+"абярыце iншую назву"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"Тут змяшчаюцца чэргi друку.\n"
-"Вы можаце дадаць яшчэ, альбо змянiць iснуючыя."
+msgid "Latvia"
+msgstr "Размеркаванне"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Printing system: "
+msgid "No known driver"
 msgstr ""
 
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 РњР±"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "Усталяванне пакету %s"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "Настройка прынтэру"
+msgid "Configure Local Area Network..."
+msgstr "Настройка лакальнай сеткi"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Настройка прынтэру"
+#: ../../services.pm:1
+#, c-format
+msgid "Launch the sound system on your machine"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
 msgstr "Чытаю базу дадзеных драйвероў CUPS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
+msgid "Information"
+msgstr "Iнфармацыя"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "Выбар тыпу злучэння прынтэру"
+msgid "No network card"
+msgstr "сеткавая карта не знойдзена"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Лакальны прынтэр"
+msgid "Which filesystem do you want?"
+msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "Усталяванне пакету %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 РєРЅРѕРїРєi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "Памеры экрану: %s\n"
+msgid "Detailed information"
+msgstr "Iнфармацыя"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Malta"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
-
-#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Installing a printing system in the %s security level"
+msgid "This floppy is not FAT formatted"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Паранаiдальны"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "Настройка сеткi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, fuzzy, c-format
-msgid "high"
-msgstr "Высокi"
+msgid "Graphic Card"
+msgstr "Вiдэакарта"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "Вылiчэнне межаў файлавай сiстэмы Windows"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "Настройка прынтэру"
+msgid "Provider dns 1 (optional)"
+msgstr "DNS 1 правайдару"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Cameroon"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
 msgstr ""
+"Вы можаце цяпер разбiць ваш дыск %s\n"
+"Па заканчэннi не забудзьцеся захаваць змяненнi, скарыстаўшы `w'"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "Настройка сеткi"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "Настройка сеткi"
+msgid "Close"
+msgstr "Порт мышы"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "Манiтор пакуль не настроены"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "Якi тып вашага ISDN злучэння?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
+"Для настройкi аддаленай чаргi друку вам патрэбна\n"
+"пазначыць iмя аддаленага сервера i iмя чаргi друку,\n"
+"у якую аддалены сервер будзе адпраўляць заданнi."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "New printer name"
-msgstr "Iмя друкаркi"
+msgid "Iceland"
+msgstr "Iсландскi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "stopped"
+msgstr "Далучыць"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "Разгарнуць дрэва"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
+"The old \"%s\" driver is blacklisted.\n"
 "\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
 "\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Expert Mode"
+msgstr "Эксперт"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "Опцыi прынтэру"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "сеткавая карта не знойдзена"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "Дрэнны файл рэзервовай копii"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "NIS сервер:"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Australian Optus cable TV"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
+"  <Tab>/<Alt-Tab> памiж элементамi  |  <Space> выбар  | <F12> наступны экран "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Друк тэставых старонак"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "Опцыi прынтэру"
+msgid "Subnet:"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Адлучэнне ад сеткi"
+msgid "Zimbabwe"
+msgstr "можа быць"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Адлучэнне ад сеткi"
+msgid "Please enter the host name or IP."
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Адлучэнне ад сеткi"
+msgid "When"
+msgstr "З колам"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Адлучэнне ад сеткi"
+msgid "Second DNS Server (optional)"
+msgstr "Другi сервер DNS:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Finland"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "Параметры глыбiнi колеру: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Яго патрэбна абнавiць"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "Аднаўленне з дыскеты"
+
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "Славенскi"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Enter a user\n"
+"%s"
 msgstr ""
+"Увядзiце iмя карыстальнiку\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "Злучэнне прынтэру"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
+"У меню маюцца наступныя пункты.\n"
+"Вы можаце дадаць яшчэ, альбо змянiць iснуючыя."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
+"Каманды, якiя выконваюцца, фiксуюцца па камандзе i часе яе выканання\n"
+"i выконваюцца групы каманд, калi загрузка памяцi нiжэй дастатковай."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-msgstr ""
-"Тэставыя старонкi адпраўлены дэману друку.\n"
-"Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n"
-"Ён працуе нармальна?"
+msgid "Installing SANE packages..."
+msgstr "Усталяванне пакету %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
+msgid "boot disk creation"
+msgstr "Настройка пасля ўсталявання"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
 msgstr ""
-"Тэставыя старонкi адпраўлены дэману друку.\n"
-"Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n"
-"Статус друку:\n"
-"%s\n"
-"\n"
-"Ён працуе нармальна?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "Друк тэставых старонак"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, fuzzy, c-format
-msgid "Photo test page"
-msgstr "Друк тэставых старонак"
+msgid "Change type"
+msgstr "Змянiць тып раздзелу"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "Друк тэставых старонак"
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "Усталяванне SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative test page (Letter)"
+msgid "Use CD/DVDROM to backup"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "Стандартны"
+#: ../../install_messages.pm:1
+#, c-format
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
+msgstr ""
+"Вiншуем, усталяванне завершана.\n"
+"Выдалiце загрузачны дыск i нацiснiце enter для перазагрузкi.\n"
+"\n"
+"\n"
+"За iнфармацыяй пра змяненнi дадзенага выпуску Mandrake Linux,\n"
+"звяртайцесь на \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Iнфармацыя па настройке вашай сiстэмы ёсть ў пасля-ўсталёвачнай\n"
+"главе вашага Дапаможнiка Карыстальнiку з Афiцыйнага Mandrake Linux."
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Print"
-msgstr "Прынтэр"
+msgid "paranoid"
+msgstr "Паранаiдальны"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "Так,  надрукаваць абедзве старонкi тэксту"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "Праверка партоў"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "Памеры экрану"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "Жадаеце пратэсцiраваць друк?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Option %s out of range!"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
+"Для друку на прынтэры SMB неабходна пазначыць iмя хосту SMB (не заўсёды "
+"супадае з iменем у сетцы TCP/IP) i адрас IP сервера друку, а таксама iмя "
+"рэсурсу, якi спалучаны з выбраным прынтэрам, iмя карыстальнiку, пароль i "
+"iнфармацыю аб працоўнай групе."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Option %s must be a number!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "reconfigure"
+msgstr "Настройка X Window"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
+"Ваша вiдэакарта можа мець 3D-паскарэнне, якое падтрымлiваецца толькi XFree %"
+"s.\n"
+"МАЙЦЕ НА ЎВАЗЕ, ШТО ГЭТА ЭКСПЕРЫМЕНТАЛЬНАЯ ПАДТРЫМКА I МОЖА ПРЫВЕСЦI ДА\n"
+"ЗАВIСАННЯ ВАШАГА КАМП'ЮТЭРУ."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Злучэнне прынтэру"
+msgid "Xinetd Service"
+msgstr "Сервер друку"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10193,554 +9982,551 @@ msgstr ""
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
+"Памылка ўсталявання аboot, \n"
+"спрабаваць усталёўваць, негледзячы на магчымасць парушэння першага разделу?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"%s exists, delete?\n"
 "\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "Якi тып друкаркi вы маеце?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "Калi ласка, запоўнiце цi пазначце поле нiжэй"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "Злучэнне прынтэру"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "Аддалены прынтэр"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-дыскi %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "The model is correct"
-msgstr "Гэта дакладна?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "The package %s is needed. Install it?"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Your printer model"
-msgstr "Аддалены прынтэр"
+msgid "On boot"
+msgstr "Yaboot"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
+msgid "Bus identification"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Location"
-msgstr "Размеркаванне"
+msgid "Please make a backup of your data first"
+msgstr "Па-першае, зрабiце рэзервовую копiю вашых дадзеных"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Description"
-msgstr "Апiсанне"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "Размеркаванне"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Name of printer"
-msgstr "Iмя друкаркi"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "На якi з маючыхся жорсткiх дыскаў Вы жадаеце ўсталяваць Linux?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "Эксперт"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "Аддалены прынтэр"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "Усталяванне пакету %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "Усталяванне пакету %s"
+msgid "Which printer model do you have?"
+msgstr "Якi тып друкаркi вы маеце?"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "Усталяванне пакету %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Add a new printer"
+msgstr "Iмя друкаркi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A command line must be entered!"
+msgid "          All of your selected data have been          "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Command line"
-msgstr "Iмя дамену"
+msgid "<-- Delete"
+msgstr "Знiшчыць"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Nepal"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Pipe into command"
+msgid "cpu # "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "Дубляванне пункту манцiравання %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "памер блоку"
 
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "commands before booting, or 'c' for a command-line."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "URI прынтэру"
+msgid "Problems installing package %s"
+msgstr "Праблемы з усталяваннем пакету %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
+
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Port"
-msgstr "РџРѕСЂС‚"
+msgid "Add a scanner manually"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "Iмя прынтэру"
+msgid "Reload partition table"
+msgstr "Дадатковая таблiца раздзелаў"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The port number should be an integer!"
+msgid "Yes, I want autologin with this (user, desktop)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Search for fonts in installed list"
+msgstr ""
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Iмя прынтэру"
+msgid "Boot"
+msgstr "Root"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"Каб друкаваць праз сокет друкаркi, вам неабходна забяспечыць\n"
-"iмя прынтэру i магчыма яго нумар порту."
+msgid "Tuner type:"
+msgstr "Змянiць тып раздзелу"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "Опцыi сокету прынтэру"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host \"%s\", port %s"
+msgid "\"Menu\" key"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", host \"%s\", port %s"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "Якi тып вашага ISDN злучэння?"
+msgid "Security Administrator:"
+msgstr "Опцыi аддаленага прынтэру lpd"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "Аддалены прынтэр"
+msgid "Please enter your login"
+msgstr "Паспрабуйце яшчэ раз"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "NCP queue name missing!"
+msgid "if set to yes, check permissions of files in the users' home."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "NCP server name missing!"
+msgid ""
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "Iмя чаргi друку"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "Сервер друку"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"Для друку на прынтэры NetWare неабходна пазначыць iмя серверу друку NetWare "
-"(не заўсёды супадае з iменем у сетцы TCP/IP) i iмя чаргi друку, якая "
-"адпавядае абранаму прынтэру, а таксама iмя карыстальнiку i пароль."
+msgid "Fonts copy"
+msgstr "Фарматаваць дыскету"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "Опцыi прынтэру NetWare"
+msgid "Automated"
+msgstr "Аўтаматычны"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Save packages selection"
+msgstr "Асабiсты выбар пакетаў"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "Фарматаванне вiртуальнага раздзелу %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "Аддалены прынтэр"
+msgid "use pptp"
+msgstr "выкарыстоўваць pppoe"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Працоўная група"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Абярыце, якiя сервiсы запускаць аўтаматычна пры загрузцы"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Share name"
-msgstr "Iмя для размеркаванага рэсурсу"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "IP сервера SMB"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "Настройка сеткi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "Iмя серверу SMB"
+msgid "Choose a mirror from which to get the packages"
+msgstr "Выбар люстра для атрымання пакетаў"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"Для друку на прынтэры SMB неабходна пазначыць iмя хосту SMB (не заўсёды "
-"супадае з iменем у сетцы TCP/IP) i адрас IP сервера друку, а таксама iмя "
-"рэсурсу, якi спалучаны з выбраным прынтэрам, iмя карыстальнiку, пароль i "
-"iнфармацыю аб працоўнай групе."
+"У праграмы змены памераў раздзела FAT не атрымалася\n"
+"апрацаваць Ваш раздзел, памылка: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Опцыi прынтэру SMB (Windows 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "На якi сектар перанесці?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Адлучэнне ад сеткi"
+msgid "Do you want to click on this button?"
+msgstr "Вы жадаеце выкарыстоўваць aboot?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "Аддалены вузел"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "Аддалены вузел"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "Аддалены прынтэр"
+msgid "Manual configuration"
+msgstr "Настройка"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "Аддалены вузел"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"Для настройкi аддаленай чаргi друку вам патрэбна\n"
-"пазначыць iмя аддаленага сервера i iмя чаргi друку,\n"
-"у якую аддалены сервер будзе адпраўляць заданнi."
+"Гэты пакет загружае абраную раскладку клавiятуры як набор з\n"
+"/etc/sysconfig/keyboard. Ёна можа быць абрана таксама з дапамогай "
+"kbdconfig.\n"
+"Вы можаце зрабiць даступнай яе для шматлікіх машынаў."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Опцыi аддаленага прынтэру lpd"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "Настройка"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "URI прынтэру"
+msgid "Xpmac (installation display driver)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgid "Zeroconf host name must not contain a ."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
+"Syslog - гэта сродак, з дапамогай якога многiя дэманы запiсваюць "
+"паведамленнi\n"
+"ў розныя файлы статыстыкi. Гэта вельмi добра для агляду працы розных службаў."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
+msgid "Unknown/Others"
+msgstr "Агульны"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "No TV Card detected!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr ""
+msgid "Options"
+msgstr "Опцыi"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "The printer \"%s\" is set as the default printer now."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Наступныя пакеты будуць выдалены"
+msgid "Auto-detected"
+msgstr "Аддалены прынтэр"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n"
+" Інтэрнэту (Internet Connection Sharing)?\n"
+"\n"
+"Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n"
+"\n"
+"Вы жадаеце усталяваць сумесны доступ да Internet?"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10750,786 +10536,705 @@ msgid ""
 "name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "Адказаць"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Available printers"
-msgstr "Даступныя пакеты"
+msgid "Remote Printers"
+msgstr "Аддалены прынтэр"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "Лакальны прынтэр"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "Стварэнне i фарматаванне файла %s"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "URI прынтэру"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "Лакальны прынтэр"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "Выбярыце iснуючы LVM для дабаўлення"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "Iмя друкаркi"
+msgid "xfs restart"
+msgstr "абмежаванне"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Iмя прынтэру"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "няма даступных раздзелаў"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "Дубляванне пункту манцiравання %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/Windows 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "Iмя дамену"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "Дубляванне пункту манцiравання %s"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "Сардэчна запрашае� у %s"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Аддалены прынтэр"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "Прынтэр"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"У некаторых выпадках %s драйверу патрэбна некаторая дадатковая iнфармацыя,\n"
+"але звычайна гэта не патрабуецца. Цi не жадаеце вы задаць для яго\n"
+"дадатковыя опцыi, цi дазволiце драйверу пратэсцiраваць машыну\n"
+"ў пошуках неабходнай iнфармацыi? Магчыма, тэсцiраванне прывядзе\n"
+"да спынення камп'ютэру, але яно нiчога не сапсуе."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Сумеснае Iнтэрнэт-злучэнне"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
+msgid "Cuba"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Настройка прынтэру"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "Даступныя пакеты"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "Змяненне памераў"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "Kernel Boot Timeout"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Жадаеце пратэсцiраваць друк?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"Падтрымка 3D-паскарэння ў Вашай відэакарце выканана толькі ў XFree %s.\n"
+"XFree %s можа выкарыстоўваць толькі 2D-паскарэнне для гэтай відэакарты."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Майстар падрыхтоўкi раздзелаў DrakX знайшоў наступныя варыянты:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "Мадьярскi"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"Абярыце вашага правайдара.\n"
+"калi яго няма ў гэтым спiсе, абярыце тып ``Iншы''"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 РњР±"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+msgid "LDAP Server"
+msgstr "сервер"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"Падтрымка PCMCIA - гэта звычайна падтрымка такiх рэчаў, як Ethernet i\n"
+"мадэмы ў наўтбуках. Вам няма неабходнасцi канфiгураваць iх, калi на вашай\n"
+"машыне iх няма, цi яна не наўтбук."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "Iмя друкаркi"
+msgid "Choose your country"
+msgstr "Выбар клавiятуры"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "Iмя друкаркi"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- System Files:\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
+msgid "Standalone Tools"
+msgstr "Кансольныя інструментальныя сродкі"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "абмежаванне"
+msgid "Where"
+msgstr "З колам"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "but not matching"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Гэта дакладна?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Iмя прынтэру"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "Настройка карт PCMCIA ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid "kdesu missing"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid "Encryption key"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Аддалены сервер CUPS"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Выдалiць чаргу друку"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "Выдалiць чаргу друку"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Дадаць карыстальнiка"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Працэс усталявання загрузчыка не атрымаўся. Узнiкла наступная памылка:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "EIDE/SCSI channel"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
+msgid "Set this printer as the default"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
+msgid "partition %s"
+msgstr "Раздзел %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr ""
+msgid "Paranoid"
+msgstr "Паранаiдальны"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "Выкарыстоўваць NIS"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Host/network IP address missing."
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "Даступныя пакеты"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "Выдалiць чаргу друку"
+msgid "No printer found!"
+msgstr "Лакальны прынтэр"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "Сцёрцi дадзеныя на ўсiм дыску"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Па дамаўленню)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
 msgstr "Настройка мадэму"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Настройка сеткi"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Зроблена"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP сервера SMB"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "No remote machines"
-msgstr "Аддалены прынтэр"
+msgid "permissions"
+msgstr "Раздзел %s"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "Настройка"
+#, c-format
+msgid "<- Previous"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Прынтэр"
+msgid "Internet Connection Sharing configuration"
+msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "Пераключэнне памiж упарадкаваннем па групе i асобках"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr ""
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Themes"
+msgstr "Дрэва"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+msgid "Options: %s"
+msgstr "Опцыi: %s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
+msgstr "Сумеснае Iнтэрнэт-злучэнне"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
 msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "Настройкi ўзроўня бяспекi"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
-"Аддалены CUPS сервер не патрабуе ад Вас настройкі прынтэру\n"
-"на гэтай машыне, ён будзе знойдзены аўтаматычна.\n"
-"Калі Вы не ўпэўнены, абярыце \"Аддалены сервер CUPS\"."
+"Некаторыя крокi не завершаны.\n"
+"Вы сапраўды жадаеце выйсцi зараз?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "Як прынтар далучаны?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Выбар тыпу злучэння прынтэру"
+msgid "Polish (qwertz layout)"
+msgstr "Польскi (qwertz раскладка)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
 msgstr ""
 
-#: ../../security/help.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Portuguese"
+msgstr "Партугальскi"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "Iмя вiртуальнага раздзелу"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "паслядоўная"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, report check result by mail."
+msgid "Newzealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "Гэты каталог павінен знаходзіцца ўнутры каранёвай файлавай сістэмы"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
+msgid "CapsLock key"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Усталяванне загрузчыку"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Пазначце памер вiдэапамяцi"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "LVM name?"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Знойдзены %s %s iнтэрфейсы"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Усталёўка"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Iмя друкаркi"
 
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Card IRQ"
+msgstr "IRQ карты"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (umask)\n"
 "\n"
-"Set the root umask."
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "logdrake"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Абярыце дыскавод, у якiм будзе стварацца загрузачная дыскета"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
+msgid "LILO with text menu"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Everything (no firewall)"
+msgstr "Ўсё сканфiгуравана!"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
+msgid "You must specify a kernel image"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
+msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "Зроблена"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Сувязь з люрам для атрымання спiсу даступных пакетаў"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr "Лiтоўскi AZERTY (стары)"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Brazilian (ABNT-2)"
+msgstr "Бразiльскi (ABNT-2)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "Усталяванне SILO"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
+msgid "/File/_Open"
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -11537,157 +11242,147 @@ msgstr ""
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "Стварэнне дыскеты для ўсталявання"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
+msgid "Open Firmware Delay"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "Мадьярскi"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "Праверка партоў"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "Настройка"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "калi ласка, пазначце тып вашай мышы."
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
 "\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "Iмя друкаркi"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Карта ISDN PCI не знойдзена. Калi ласка, пазначце на наступным экране."
 
-#: ../../security/help.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
+msgid "GB"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "Калi ласка, увядзiце iмя карыстальнiку"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
+msgid "Enable CD Boot?"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "Злучэнне прынтэру"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -11695,740 +11390,536 @@ msgstr ""
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Not enough swap space to fulfill installation, please add some"
 msgstr ""
+"Не хапае месца ў буферы падкачкi (swap) для ўсталявання, павялiчце яго."
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "Абярыце дадатковыя настройкi для сервера"
-
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Security level"
-msgstr "Настройкi ўзроўня бяспекi"
+msgid "%s on %s"
+msgstr "РџРѕСЂС‚"
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "Узровень бяспекi"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
 
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "Опцыi"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Which is your timezone?"
+msgstr "Якi ваш часавы пояс?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
-msgstr ""
-"Прымаюцца ўласцiвасцi 4 узроўня, але зараз сiстэма поўнасцю зачынена.\n"
-"Параметры бяспекi ўстаноўлены на максiмум."
+msgid "Guinea"
+msgstr "Агульны"
 
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
-"На гэтам узроўне бяспекi магчыма выкарыстанне сiстэмы ў якасцi\n"
-"серверу. Узровень бяспекi дастаткова высокi для работы\n"
-"серверу, якi дапускае злучэннi са шматлiкiмi клiентамi."
+msgid "The system is now connected to the Internet."
+msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
 msgstr ""
-"Гэта стандартны узровень бяспекi, якi рэкамендаваны для камп'ютэру,\n"
-"якi далучаны да Internet у якасцi клiенту. Даданыя новыя праверкi\n"
-"бяспекi."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
 msgstr ""
-"Пароль зараз уключаны, але выкарыстанне камп'ютэру ў якасцi сеткавага\n"
-"таксама не рэкамендавана."
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
 msgstr ""
-"Гэты узровень неабходна выкарыстоўваць з асцярогай. Сiстэма будзе прасцей\n"
-"у карыстаннi, але i больш чутнай: гэты узровень бяспекi нельга "
-"выкарыстоўваць\n"
-"на машынах, якiя далучаны да сеткi цi да Internet. Уваход не абаронены "
-"паролем."
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Паранаiдальны"
+msgid "Icon"
+msgstr "Пiктаграма"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Higher"
-msgstr "Высокi"
+msgid "Please choose what you want to backup"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "High"
-msgstr "Высокi"
+msgid "256 colors (8 bits)"
+msgstr "256 колераў (8 бiтаў)"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "Зусім слабы"
+msgid "Read-write"
+msgstr "Чытанне-запiс"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Сардэчна запрашаем у Crackers"
+msgid "Size: %s\n"
+msgstr "Памер: %s\n"
 
-#: ../../standalone/XFdrake:1
-#, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Калi ласка, перайдзiце ў %s для актывацыi змяненняў"
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname: "
+msgstr "Iмя машыны"
 
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Калi ласка, выйдзiце, а потым скарыстайце Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "Памер фрагменту %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "Лакальны прынтэр"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "Дыскавод недаступны"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "Размеркаванне"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "Устаўце дыскету ў дыскавод %s"
+msgid "Error!"
+msgstr "Памылка"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Write Config"
-msgstr "Настройка X Window"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "cable connection detected"
+msgstr "Злучэнне прынтэру"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Заканчэнне настройкi"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "IP Range End:"
+msgid "/_Report Bug"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS сервер:"
+msgid "Resize"
+msgstr "Змяненне памераў"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "Iмя дамену"
+msgid "Dominica"
+msgstr "NIS Domain"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "Памеры экрану: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Routers:"
+msgid "matching"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "Маска сеткi"
-
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "Настройка IDE"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "Наступныя пакеты будуць выдалены"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "Знiшчыць"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "Далучэнне да Iнтэрнэту"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "<-- Edit Client"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "Выкарыстоўваць iснуючы раздзел"
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Canadian (Quebec)"
+msgstr "Канадскi (Квебэк)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Allow Thin Clients"
+msgid "Mouse device: %s\n"
+msgstr "Мыш: %s\n"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Thin Client"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "No net boot images created!"
+msgid ""
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "type: %s"
-msgstr "Тып: "
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Del User"
+msgid "We are now going to configure the %s connection."
 msgstr ""
+"\n"
+"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, fuzzy, c-format
-msgid "Add User -->"
-msgstr "Дадаць карыстальнiка"
+msgid "MandrakeExpert Corporate"
+msgstr "эксперт"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "Абярыце файл"
+msgid "Write protection"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "Знiшчыць"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr ""
+msgid "You've not selected any font"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+msgid "Language"
+msgstr "Выбар мовы"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "Размеркаванне"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Printer model selection"
+msgstr "Злучэнне прынтэру"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны пасля змены яго тыпу"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d секундаў"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Boot Floppy"
+msgid "A valid URI must be entered!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
-msgstr ""
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "Настройка"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Add/Del Clients"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "Друк тэставых старонак"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "Дадаць карыстальнiка"
+msgid "Custom disk partitioning"
+msgstr "Выкарыстоўваць iснуючы раздзел"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Net Boot Images"
+msgid "Enter Printer Name and Comments"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr "Стварыць загр. дыск"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
 #: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Stop Server"
-msgstr "NIS сервер:"
+msgid "type: %s"
+msgstr "Тып: "
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "NIS сервер:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "Славацкi (QWERTY)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/draksound:1
 #, fuzzy, c-format
-msgid "Disable Server"
-msgstr "Сервер друку"
+msgid "No Sound Card detected!"
+msgstr "Размеркаванне"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "Сервер друку"
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#, c-format
+msgid "Mouse Port"
+msgstr "Порт мышы"
 
 #: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "Фарматаванне вiртуальнага раздзелу %s"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "Дадаць карыстальнiка"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "Усталёўка"
-
-#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Congratulations!"
-msgstr "Прыміце вiншаваннi!"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Ftp Server"
+msgstr "NIS сервер:"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "Стварэнне дыскеты для ўсталявання"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "manual"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Настройка мадэму"
+msgid "the type of bus on which the mouse is connected"
+msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "replay"
-msgstr "Перазагрузiць"
+msgid "Uganda"
+msgstr "Адкат"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
 "\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "Настройка пасля ўсталявання"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "Памылка"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
 "\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
 "\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
 "\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
+msgid "Comoros"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
 msgstr ""
+"\n"
+"Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yaboot mode"
+msgstr "Загрузачная прылада"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
+msgstr ""
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Звычайная мыш з 3 кнопкамі"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "калi ласка, пазначце тып вашай мышы."
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "Iмя для размеркаванага рэсурсу"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12440,4574 +11931,5121 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
 " \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
+msgid "KB"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore"
-msgstr "Аднаўленне з файлу"
+msgid "Network & Internet"
+msgstr "Сеткавы iнтэрфейс"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "Настр. файлавых сiстэмаў"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Лiтоўскi \"фанетычны\" QWERTY"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "Заканчэнне настройкi"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "Настройка"
+msgid "Sharing of local scanners"
+msgstr "Даступныя пакеты"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "Канфiгурацыя сеткi"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Канфiгурацыя сеткi"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "Канфiгурацыя сеткi"
+msgid "Remote host name missing!"
+msgstr "Аддалены вузел"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
+msgid "with /usr"
 msgstr ""
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sending files..."
-msgstr "Захаванне ў файл"
+msgid "Network"
+msgstr "Сетка:"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "Дрэнны файл рэзервовай копii"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "Гэты пароль занадта просты"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "Дрэнны файл рэзервовай копii"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "Славацкi (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "Дрэнны файл рэзервовай копii"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"  Transfer  \n"
+"Now"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "Калi ласка, абярыце мову для карыстання."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "Калi ласка, абярыце мову для карыстання."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "Калi ласка, абярыце мову для карыстання."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Наступныя пакеты будуць даданы да сiстэмы"
+msgid "Use daemon"
+msgstr "Iмя карыстальнiку:"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
+msgid "Authentication"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Next"
-msgstr "РўСЌРєСЃС‚"
+msgid "Additional CUPS servers: "
+msgstr "IP сервера SMB"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Previous"
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Save"
-msgstr "Стартавае меню"
+msgid "Where do you want to mount %s?"
+msgstr "Куды вы жадаеце манцiраваць прыладу %s?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Restore Via Network"
+msgstr "Пераканфiгураваць лакальную сетку"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "Аднаўленне з файлу"
+msgid "Algeria"
+msgstr "паслядоўная"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "Дадатковая таблiца раздзелаў"
+msgid "Initrd-size"
+msgstr "Initrd"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "CD in place - continue."
+msgid "\tBackups use tar and gzip\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Па выбару"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 РњР±"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Restore all backups"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "Аднаўленне з файлу"
+msgid "Setting Default Printer..."
+msgstr "Лакальны прынтэр"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Files Restored..."
+msgid "Interface %s (using module %s)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Name: %s\n"
+msgstr "IРјСЏ: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Hostname required"
-msgstr "Iмя машыны"
+msgid "Generating preview ..."
+msgstr "Вызначэнне прыладаў..."
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Username required"
-msgstr "Iмя карыстальнiку:"
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Password required"
-msgstr "Пароль"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "паслядоўная"
 
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Host Path or Module"
+msgid "DVD-ROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host Name"
-msgstr "Iмя машыны"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Грузiнскi (\"Лацiнская\" раскладка)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "Get the best items with Mandrake Linux Strategic partners"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "Пераканфiгураваць лакальную сетку"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
 msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "Дадатковая таблiца раздзелаў"
+msgid "Kenya"
+msgstr "Клавiятура"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Use ``Unmount'' first"
+msgstr "Спачатку зрабiце ``Unmount''"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing mtools packages..."
+msgstr "Усталяванне пакету %s"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "You must specify a root partition"
+msgstr "Вы павiнны мець раздзел swap"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "Настройка пасля ўсталявання"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+msgid "Both Shift keys simultaneously"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "Аднаўленне з дыскеты"
+msgid "Select a scanner model"
+msgstr "Абярыце вiдэакарту"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Backup files not found at %s."
+msgid "LPRng - LPR New Generation"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr "Аднаўленне з файлу"
+msgid "Drakbackup Configuration"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "Выдалiць чаргу друку"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Save as.."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove user directories before restore."
+msgid "Korea (North)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
+msgid "Autologin"
+msgstr "Аўтаматычны ўваход у сiстэму"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "калi ласка, пазначце тып вашай мышы."
+msgid "System configuration"
+msgstr "Настройка"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore Other"
-msgstr "Аднаўленне з файлу"
+msgid "Domain Admin Password"
+msgstr "Падцвердзiць пароль"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "Аднаўленне з файлу"
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
+msgid ""
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Restore system"
-msgstr "Усталяванне сiстэмы"
+msgid "Configuring printer ..."
+msgstr "Настройка прынтэру"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "Іншыя"
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "калi ласка, пазначце тып вашай мышы."
+#: ../../common.pm:1
+#, c-format
+msgid "MB"
+msgstr "РњР±"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "Аднаўленне з дыскеты"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Bermuda"
+msgstr "Нямецкi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "click here if you are sure."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Дрэнны файл рэзервовай копii"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "калi ласка, пазначце тып вашай мышы."
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"Далей адзначаны усе існуючыя раздзелы Linux, знойдзеныя на вашым дыску,\n"
+" якія зроблены майстрам вылучэння дыскаў. Вы можаце пакінуць іх так і "
+"выкарыстўваць\n"
+" далей, бо яны добра падыходзяць для звычайнага выкарыстання. Калі вы\n"
+" ўносіце змены, вы павінны, вылучыць хаця раздзел (\"/\"). Рабіце\n"
+" раздзел не вельмі малым, бо ў адваротным выпадку вы ня здолееце усталяваць\n"
+" дастаткова праграмнага забеспячэння.Калі вы жадаеце захаваць вашыя "
+"дадзеныя\n"
+" на асобным раздзеле, вы павінны абраць пункт манціравання \"/home\".\n"
+"\n"
+"Кожны раздзел пазначаны наступным чынам \"Імя\", \"Свойствы\".\n"
+"\n"
+"\n"
+"\"Імя\" кадавана так - \"тып дыску\", \"нумар дыску\", \"нумар раздзелу\" \n"
+"(напрыклад, \"hda1\").\n"
+"\n"
+"\n"
+"\"Тып дыску\" кадаваны як \"hd\", калі гэта IDE, і \"sd\" калі SCSI.\n"
+"   * \"а\" \"master\" на першасным канале IDE \n"
+"   * \"b\" \"slave\" на першасным канале IDE\n"
+"   * \"c\" \"master\" на другасным канале IDE\n"
+"   * \"d\" \"slave\" на другасным канале IDE\n"
+"\n"
+"\n"
+"Для SCSI дыскаў - \"a\" гэта \"першасны жорскі дыск\", \"b\" - \"другасны "
+"жорскі дыск\", і г.д."
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Remove"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Lesotho"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "OK to restore the other files."
+msgid "utopia 25"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "Канфiгурацыя сеткi"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
+msgid "Pipe job into a command"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "          All of your selected data have been          "
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Backup files are corrupted"
+msgid "Yes"
+msgstr "Так"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
 msgstr ""
 
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Якi пратакол вы жадаеце выкарыстоўваць?"
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Да якога паслядоўнага порту далучаны мадэм?"
+msgid "Restore Progress"
+msgstr "Аднаўленне з файлу"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Estonia"
+msgstr "Эстонскi"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
+"Вы маеце дзiрку ў таблiцы радзелаў, але я не маю магчымасцi яе скарыстаць.\n"
+"Адзiны выхад у тым, каб перамясцiць першасныя раздзелы так, каб дзiрка iшла\n"
+"адразу за пашыраным (extended) раздзелам"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Channel"
+msgstr "Адмена"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Add"
+msgstr "Дадаць"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
 
 #: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " Error while sending mail. \n"
+msgstr "Памылка чытання файлу %s"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "Клавiятура"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "\t-Network by SSH.\n"
+msgid ""
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "\t-Tape \n"
-msgstr "Тып: "
+msgid "Choose the connection you want to configure"
+msgstr "Абярыце iнструмент, якi жадаеце скарыстаць"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "Настройкi ўзроўня бяспекi"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Hard drive.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "Configuring network device %s"
+msgstr "Настройка сеткавай прылады %s"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "Актыўны"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
 msgstr ""
+"Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для "
+"далучэння да iнтэрнэт"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Пошук пакетаў для абнаўлення"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Пункт манцiравання:"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "\tDo not include System Files\n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "Опцыi"
+msgid "With X"
+msgstr "Чакайце"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Multi-head configuration"
+msgstr "чытанне настройкi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
+
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Save via %s on host: %s\n"
+"%s"
 msgstr ""
+"Ці жадаеце Вы захаваць змяненні?\n"
+"Бягучая канфігурацыя:\n"
+"\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Вы не можаце разбiваць на разделы, памер якiх меней за 32 Мб"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
+"Пратакол rwho дае магчымасць карыстальнiкам атрымаць спiс ўсiх\n"
+"карыстальнiкаў, увайшоўшых на машыну, выканаў rwho дэман (падобны на finger)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "Domain name"
+msgstr "Iмя дамену"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " on device: %s"
-msgstr "Мыш: %s\n"
+msgid "Sharing of local printers"
+msgstr "Даступныя пакеты"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "RW"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "Даступныя пакеты"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "Empty"
+msgstr "Пуста"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Delete hard drive tar files after backup.\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "text width"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Куды вы жадаеце манцiраваць прыладу %s?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Interface \"%s\""
+msgstr "Сеткавы iнтэрфейс"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- System Files:\n"
+msgid "With basic documentation (recommended!)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
+#, fuzzy, c-format
+msgid "1 button"
+msgstr "2 РєРЅРѕРїРєi"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Backup Sources: \n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "Select user manually"
+msgid "Test"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Backup Users"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid direct root login."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup system"
-msgstr "Настр. файлавых сiстэмаў"
+msgid "Korea"
+msgstr "Перанос"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Ваш выбар? (змоўчанне %s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "on Tape Device"
-msgstr "Порт прынтэру"
+msgid "Raw printer"
+msgstr "Iмя друкаркi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "on CDROM"
+msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "across Network"
-msgstr "Сетка:"
+msgid "Vendor"
+msgstr "Адкат"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Interface %s"
+msgstr "Сеткавы iнтэрфейс"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "on Hard Drive"
+msgid "Configure mouse"
+msgstr "Настройка мышы"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the mount points"
+msgstr "Абярыце пункты манцiравання"
+
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Yugoslavian (latin)"
+msgstr "Азербайджанскі (latin)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "Опцыi модулю:"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "Усталёўваем"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "З колам"
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Where"
-msgstr "З колам"
+msgid "Is this an install or an upgrade?"
+msgstr "Абярыце ўсталяванне цi абнаўленне"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "What"
-msgstr "Чакайце"
+msgid "ISDN card"
+msgstr "Унутраная ISDN карта"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "\t-Hard drive.\n"
+msgstr ""
+
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
+msgid "Printer on remote CUPS server"
+msgstr "Аддалены сервер CUPS"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "Калi ласка, абярыце мову для карыстання."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "delete"
+msgstr "Знiшчыць"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Use daemon"
-msgstr "Iмя карыстальнiку:"
+msgid "DHCP host name"
+msgstr "Iмя машыны"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "monthly"
+msgid "The maximum lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "weekly"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Did it work properly?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "daily"
+msgid "Poor"
+msgstr "Зусім слабы"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "hourly"
+msgid "Grenada"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "HardDrive / NFS"
+msgid "Unsafe"
+msgstr "Ненадзейна"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s сектараў"
+
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "No"
+msgstr "РќРµ"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
+msgid "Guadeloupe"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "Выбар пакетаў для ўсталявання"
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "Выбар пакетаў для ўсталявання"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Vertical refresh rate"
+msgstr "Часціня вертыкальнай разгорткi"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Выбар пакетаў для ўсталявання"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "Пераход на крок `%s'\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Removing %s ..."
+msgstr "Памеры экрану: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "Абярыце файл"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
-msgstr ""
+msgid "Niger"
+msgstr "Высокi"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Націсніце на раздзел"
+msgid "No printer"
+msgstr "Iмя друкаркi"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Націсніце на раздзел"
+msgid "alert configuration"
+msgstr "Настройка"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " Erase Now "
+msgid "NetWare Printer Options"
+msgstr "Опцыi прынтэру NetWare"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Націсніце на раздзел"
+msgid "General"
+msgstr "Агульны"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Націсніце на раздзел"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing system: "
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Націсніце на раздзел"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Калi ласка, абярыце тып клавiятуры."
+msgid "Network configuration (%d adapters)"
+msgstr "Канфiгурацыя сеткi"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "РћРє"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "Няма паролю"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Iмя чаргi друку"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "Паспрабуйце яшчэ раз"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Вы жадаеце выкарыстоўваць aboot?"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "Паспрабуйце яшчэ раз"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Беларускі"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+msgid "Move files to the new partition"
+msgstr "Не хапае прасторы для стварэння новых раздзелаў"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "Дадатковая таблiца раздзелаў"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "Прынтэр"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "Працоўная група"
+
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+msgid "mounting partition %s in directory %s failed"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Use Expect for SSH"
+msgid "Lilo screen"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid "Net Method:"
+msgid "LILO with graphical menu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Дрэнны файл рэзервовай копii"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "Iмя карыстальнiку:"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "Выдалiць Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "Чакаецца"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "Выдалiць чаргу друку"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/Windows 95/98/NT"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "Усё роўна працягваць?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Выбар пакетаў для ўсталявання"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Прагляд даступных пакетаў"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "Пазначце параметры"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
+msgid "Vanuatu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Дрэнны файл рэзервовай копii"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"З дапамогай загрузачнага дыска вы зможаце загружаць Linux незалежна ад\n"
+" стандартнага загрузчыка. Гэта можа быць якасна, калi вы не жадаеце \n"
+"ўсталёўваць SILO, калi iншая аперацыйная сiстэма выдаляе SILO, цi SILO не \n"
+"можа працаваць у вашай канфiгурацыi. Загрузачны дыск таксама можа быць \n"
+"выкарыстан сумесна з выратавальнай дыскетай Mandrake Linux, якая вельмi \n"
+"палегчыць выратаванне сiстэмы пасля збою.\n"
+"\n"
+"Калi жадаеце стварыць загрузачны дыск зараз, устаўце дыскету ў першы\n"
+"дыскавод i нацiснiце \"Ok\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr ""
+"Вам неабходна задаць правiльны тып файлавай сiстэмы (ext2, reiserfs)\n"
+"для гэтай кропкi манцiравання\n"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "File Selection"
-msgstr "Выбар групы пакетаў"
+msgid "Theme installation failed!"
+msgstr "Клас усталявання"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "Памылка чытання файлу %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "Выкарыстоўваць для вiртуальнай файлавай сiстэмы"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "выкарыстоўваць pppoe"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "Не хапае прасторы для стварэння новых раздзелаў"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s з эксперыментальнай падтрымкай 3D-паскарэння"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+msgid "Advanced"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "More Options"
+msgstr "Опцыi модулю:"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "Дрэнны файл рэзервовай копii"
+msgid "Afghanistan"
+msgstr "Iранскi"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "Дрэнны файл рэзервовай копii"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron - стандартная UNIX праграма, якая выконвае праграмы карыстальнiка\n"
+"праз пазначаныя перыяды часу. Vixie cron дадае рад дапаўненняў да "
+"стандартнага\n"
+"UNIX cron, уключаючы лепшы ўзровень бяспекi i моцныя канфiгурацыйныя опцыi."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "Чытайце ўважлiва!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not erasable media!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "РџРѕСЂС‚"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Праверка партоў"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Press enter to boot the selected OS, 'e' to edit the"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s not responding"
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Памылка адкрыцця %s для запiсу: %s"
+msgid "The encryption keys do not match"
+msgstr "Паролi не супадаюць"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "Няма паролю"
-
-#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Памеры экрану"
+
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
+"drakfirewall configurator\n"
 "\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Выдалiць чаргу друку"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Network configuration"
+msgstr "Канфiгурацыя сеткi"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "Чакаецца"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+msgid "Move selected rule down one level"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "INFO"
+msgid "TB"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "FATAL"
-msgstr "FAT"
+msgid "Please check if you are using a DVDR device"
+msgstr "Націсніце на раздзел"
 
 #: ../../standalone/drakbackup:1
-#, c-format
-msgid "WARNING"
-msgstr ""
+#, fuzzy, c-format
+msgid "FATAL"
+msgstr "FAT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Cron not available yet as non-root"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Усталяванне %s не атрымалася. Узнiкла наступная памылка:"
+msgid "Delete"
+msgstr "Знiшчыць"
 
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "No, I don't want autologin"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
 msgstr ""
+"Можна настроiць сiстэму для аўтаматычнага запуску X пасля старту сiстэмы.\n"
+"Жадаеце, каб X стартаваў пры рэстарце?"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
+msgid "Build the disk"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "Настройка ISDN"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "System mode"
+msgid "Status:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Bootsplash"
-msgstr ""
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "NIS сервер:"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lilo screen"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Еўропа (EDSS1)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
+msgid ", printer \"%s\" on server \"%s\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Themes"
-msgstr "Дрэва"
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
+#, c-format
+msgid "Error"
+msgstr "Памылка"
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Асабiсты выбар пакетаў"
+#: ../../any.pm:1
+#, c-format
+msgid "allow \"su\""
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Сумеснае Iнтэрнэт-злучэнне"
+msgid "Australia"
+msgstr "паслядоўная"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "Клас усталявання"
+msgid "Configure only card \"%s\"%s"
+msgstr "Канфiгураваць маю карту"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Notice"
-msgstr "гальштук"
+msgid "Level"
+msgstr "узровень"
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "Настройка сеткi"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
-msgstr ""
-
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr ""
+msgid "Configure services"
+msgstr "Настройка службаў"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "Сервер XFree86 %s"
-
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "mount failed: "
+msgstr "памылка манцiравання: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Lilo message not found"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr ""
+msgid "Image"
+msgstr "Вобраз"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Create new theme"
-msgstr "Стварэнне новага раздзелу"
+msgid "Remote Administration"
+msgstr "Опцыi аддаленага прынтэру lpd"
 
-#: ../../standalone/drakboot:1
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Display theme\n"
-"under console"
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Install themes"
-msgstr "Усталяванне сiстэмы"
+msgid "Selected All"
+msgstr "Абярыце файл"
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "Рэжым злучэння"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "CUPS - Common Unix Printing System"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "Загрузачная прылада"
+msgid "Webmin Service"
+msgstr "прылада"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "<control>Q"
-msgstr ""
+msgid "device"
+msgstr "прылада"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "/File/_Quit"
-msgstr ""
+msgid "All"
+msgstr "РЈСЃС‘"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "/_File"
-msgstr "Файлы:\n"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Якую сiстэму друку Вы жадаеце выкарыстоўваць?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Boot Style Configuration"
-msgstr "Настройка мадэму"
+msgid "Greece"
+msgstr "Грэчаскi"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "Вы можаце абраць іншыя мовы, якiя будуць даступны пасля ўсталявання"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "An error occurred"
+msgstr "Адбылася памылка"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
 msgstr ""
+"Гэты пакет павiнен быць абноўлены\n"
+"Вы ўпэўнены, што хочаце адмянiць вылучэнне?"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Package not installed"
-msgstr "Заканчэнне ўсталявання"
+msgid "Tamil (Typewriter-layout)"
+msgstr "РђСЂРјСЏРЅСЃРєi (typewriter)"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "Заканчэнне ўсталявання"
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Кансольныя інструментальныя сродкі"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model, driver"
+msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Report"
-msgstr "РџРѕСЂС‚"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
-"\n"
+"Directory %s already contains data\n"
+"(%s)"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Release: "
-msgstr "Калi ласка, пачакайце"
+msgid "Printer on NetWare server"
+msgstr "Сервер друку"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Пазначце памер RAM у Mб"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "Пакет"
+#: ../../any.pm:1
+#, c-format
+msgid "Real name"
+msgstr "Уласнае iмя"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Application:"
-msgstr "Размеркаванне"
+msgid "done"
+msgstr "Зроблена"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Канфiгурацыя сеткi"
+msgid "Please uncheck or remove it on next time."
+msgstr "Да якога паслядоўнага порту далучаны мадэм?"
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Userdrake"
-msgstr "Выкарыстоўваць DiskDrake"
+msgid "Higher"
+msgstr "Высокi"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Windows Migration tool"
-msgstr "Навуковыя прыкладанні"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Выбар раздзелаў для фарматавання"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Urpmi"
+msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "Iмя для размеркаванага рэсурсу"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "Аддалены прынтэр"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Msec"
-msgstr "Порт мышы"
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Menudrake"
-msgstr "абавязкова"
+msgid "Can't find %s on %s"
+msgstr "Памылка адкрыцця %s для запiсу: %s"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Далучэнне да Iнтэрнэту"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Japanese 106 keys"
+msgstr "Японскi 106 клавiш"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "HardDrake"
+msgid "This will take a few minutes."
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid "Burkina Faso"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "First Time Wizard"
+msgid "Use scanners on remote computers"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Далучэнне да Iнтэрнэту"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Mandrake Bug Report Tool"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "Выдалiць чаргу друку"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Parameters"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Аддалены сервер CUPS"
 
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Internet Connection Configuration"
-msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
+msgid "Insert a floppy in %s"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "DHCP Client"
+msgid "Maldives"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr ""
+msgid "compact"
+msgstr "кампактна"
 
-#: ../../standalone/drakconnect:1
+#: ../../common.pm:1
 #, c-format
-msgid "Gateway"
-msgstr "Шлюз"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connection type: "
-msgstr "Iмя злучэння"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Profile: "
-msgstr "памылка манцiравання: "
+msgid "1 minute"
+msgstr "1 С…РІiР»iРЅР°"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Internet connection configuration"
-msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
+msgid "on channel %d id %d\n"
+msgstr "на шыне %d id %d\n"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+msgid ", multi-function device"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "Laos"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "activate now"
-msgstr "Актыўны"
-
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "deactivate now"
-msgstr "Актыўны"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
+msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr ""
+"Не знойдзена раздзелаў FAT для змянення памераў альбо выкарыстання\n"
+"ў якасцi вiртуальнай файлавай сiстэмы (цi недастаткова прасторы на дыску)"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Started on boot"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Boot Protocol"
+msgid "Firewall"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Adapter %s: %s"
+msgid "Area:"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN Configuration"
-msgstr "Настройка"
-
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "LAN configuration"
-msgstr "Настройка ADSL"
-
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "(E)IDE/ATA controllers"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Connect..."
-msgstr ""
+msgid "Printer Server"
+msgstr "Сервер друку"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Disconnect..."
+msgid "Disconnection from the Internet complete."
 msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Not connected"
-msgstr "Размеркаванне"
-
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Connected"
-msgstr "Iмя злучэння"
+msgid "Custom configuration"
+msgstr "Настройка"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface:"
+msgid "Saint Pierre and Miquelon"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Gateway:"
-msgstr "Шлюз:"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Apply"
-msgstr "Применить"
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Click here to launch the wizard ->"
+msgid ""
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Wizard..."
-msgstr "Майстар стварэння..."
-
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Status:"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Type:"
-msgstr "Тып: "
+msgid "Portugal"
+msgstr "РџРѕСЂС‚"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Internet access"
-msgstr ""
+msgid "Do you have another one?"
+msgstr "Цi ёсць у вас iншы?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Hostname: "
-msgstr "Iмя машыны"
+msgid ", printing to %s"
+msgstr "Памылка запiсу ў файл %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Configure Local Area Network..."
-msgstr "Настройка лакальнай сеткi"
+msgid "Assign host name from DHCP address"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
 
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "State"
-msgstr "Стартавае меню"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to normal mode"
+msgstr "Звычайны рэжым"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Generic"
+msgstr "Агульны"
+
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Driver"
-msgstr "сервер"
+msgid "Cylinder %d to %d\n"
+msgstr "Цылiндры з %d па %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "Protocol"
+msgid "New profile..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Which disk do you want to move it to?"
+msgstr "На якi дыск перанесці?"
+
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "Display logo on Console"
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Interface"
-msgstr "Сеткавы iнтэрфейс"
+msgid "Windows Domain"
+msgstr "Навуковыя прыкладанні"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Configure Internet Access..."
-msgstr "Настройка службаў"
+msgid "Interface %s (on network %s)"
+msgstr "Сеткавы iнтэрфейс"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wait please"
+msgid "INFO"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Wallis and Futuna"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "New profile..."
+msgid "Need to create /etc/dhcpd.conf first!"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Profile to delete:"
+msgid "Is FPU present"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Del profile..."
+msgid "There are no scanners found which are available on your system.\n"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Канфiгурацыя сеткi"
-
-#: ../../standalone/drakedm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"No additional information\n"
+"about this service, sorry."
 msgstr ""
 
-#: ../../standalone/drakedm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Choosing a display manager"
+msgid "Build Single NIC -->"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+msgid "Is this correct?"
+msgstr "Гэта дакладна?"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Marshall Islands"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Unable to fork: %s"
-msgstr "Зрабiць неактыўным сеткавае злучэнне"
+msgid "Windows (FAT32)"
+msgstr "Выдалiць Windows(TM)"
 
-#: ../../standalone/drakfloppy:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
-msgstr ""
+msgid "Root password"
+msgstr "Пароль для root"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Be sure a media is present for the device %s"
+msgid "Build All Kernels -->"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Build the disk"
+msgid "if set to yes, report unowned files."
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Output"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
 msgstr ""
+"Няма раздзела swap.\n"
+"\n"
+"Усё адно працягваць?"
 
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Remove a module"
-msgstr "Адваротны парадак старонак"
-
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Add a module"
-msgstr "Дадаць карыстальнiка"
+msgid "Server IP missing!"
+msgstr "Iмя прынтэру"
 
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "omit scsi modules"
-msgstr "Рэжым злучэння"
+msgid "Suriname"
+msgstr "Iмя для размеркаванага рэсурсу"
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "if needed"
+msgid "Enable ACPI"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
-msgid "omit raid modules"
+msgid "Graphical Environment"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "force"
-msgstr "Перанос"
-
-#: ../../standalone/drakfloppy:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mkinitrd optional arguments"
+msgid "Gibraltar"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Expert Area"
-msgstr "Эксперт"
-
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "kernel version"
-msgstr "Настройка злучэння з Iнтэрнэтам"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "default"
-msgstr "Па дамаўленню"
-
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "General"
-msgstr "Агульны"
+msgid "on Tape Device"
+msgstr "Порт прынтэру"
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "boot disk creation"
-msgstr "Настройка пасля ўсталявання"
+msgid "Do nothing"
+msgstr "Чакаецца"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "drakfloppy"
-msgstr "Аднаўленне з дыскеты"
+msgid "Delete Client"
+msgstr "Знiшчыць"
 
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Size"
-msgstr "Памер: %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Filesystem type: "
+msgstr "Тып файлавай сiстэмы:"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Module name"
-msgstr "Опцыi модулю:"
+msgid "Starting network..."
+msgstr "Якi тып вашага ISDN злучэння?"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Заканчэнне ўсталявання"
+#: ../../lang.pm:1
+#, c-format
+msgid "Vietnam"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+msgid "/_Fields description"
+msgstr "Апiсанне"
 
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Initial tests"
+msgid "Optimize your security by using Mandrake Linux"
 msgstr ""
 
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
 #: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Усталёўка"
+#, c-format
+msgid "Help"
+msgstr "Дапамога"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Ваш асабiсты тэлефонны нумар"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "Якую прастору захаваць для Windows?"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove List"
-msgstr "Аддалены прынтэр"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"Тэставыя старонкi адпраўлены дэману друку.\n"
+"Перад тым, як прынтэр запрацуе, можа прайсцi пэўны час.\n"
+"Ён працуе нармальна?"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Selected All"
-msgstr "Абярыце файл"
+msgid "Username required"
+msgstr "Iмя карыстальнiку:"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
-msgid "Unselected All"
+msgid ""
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "here if no."
-msgstr ""
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Опцыi прынтэру SMB (Windows 9x/NT)"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "click here if you are sure."
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "Усталяванне сiстэмы"
-
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "mkinitrd optional arguments"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Прынтэр"
+msgid "Protocol for the rest of the world"
+msgstr "Падключэнне"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Abiword"
-msgstr "Адмянiць"
+msgid "Print test pages"
+msgstr "Друк тэставых старонак"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "РґРѕР±СЂР°"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "64 MB or more"
+msgstr "64 Мб цi болей"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ghostscript"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Выбар раздзелаў для фарматавання"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Please select the device where your %s is attached"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
+msgid "Not formatted\n"
+msgstr "Не адфарматавана\n"
+
+#: ../../standalone/draksec:1
+#, c-format
+msgid "Periodic Checks"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "About"
-msgstr "Адмянiць"
+msgid "PXE Server Configuration"
+msgstr "Заканчэнне настройкi"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Font List"
-msgstr "Кропка манцiравання"
+msgid "Backup the system files before:"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../standalone/drakfont:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "Заканчэнне настройкi"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Гэта стандартны узровень бяспекi, якi рэкамендаваны для камп'ютэру,\n"
+"якi далучаны да Internet у якасцi клiенту. Даданыя новыя праверкi\n"
+"бяспекi."
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Uninstall Fonts"
-msgstr "Выдаленне выбраных RPM-пакетаў з сiстэмы"
+#: ../../any.pm:1
+#, c-format
+msgid "First floppy drive"
+msgstr "Першы дыскавод"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Get Windows Fonts"
+msgid "/File/_Quit"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "Фарматаванне раздзелаў"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "done"
-msgstr "Зроблена"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose the new size"
+msgstr "Выбар новых памераў"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "абмежаванне"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Media class"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Suppress Fonts Files"
+msgid "The %s is not known by this version of Scannerdrake."
 msgstr ""
 
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Faroe Islands"
+msgstr "Iсландскi"
+
 #: ../../standalone/drakfont:1
 #, fuzzy, c-format
 msgid "Restart XFS"
 msgstr "абмежаванне"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
+msgid "Add host/network"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "type1inst building"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save to:"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "Опцыi модулю:"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Albania"
+msgstr "Iранскi"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "pfm fonts conversion"
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "ttf fonts conversion"
+msgid "British Indian Ocean Territory"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Normal Mode"
+msgstr "Звычайны"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ghostscript referencing"
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer connection type"
+msgstr "Сумеснае Iнтэрнэт-злучэнне"
+
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "No network adapter on your system!"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Сетка:"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "True Type install done"
+msgid "Malayalam"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Option %s out of range!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "Падрыхтоўка ўсталяваньня"
+msgid "Connect %s"
+msgstr "Iмя злучэння"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "Фарматаваць дыскету"
+msgid "Restarting CUPS..."
+msgstr "абмежаванне"
 
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Адлучэнне ад сеткi"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Duplicate mount point %s"
+msgstr "Дубляванне пункту манцiравання %s"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Reselect correct fonts"
+msgid "if set to yes, run chkrootkit checks."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Connection Configuration"
+msgstr "Настройка далучэння да Iнтэрнэту"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "no fonts found"
-msgstr "Не знайшлi %s"
+msgid "Unknown|Generic"
+msgstr "Агульны"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
-msgid "parse all fonts"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Quit"
+msgstr "Выхад"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Search installed fonts"
+msgid "Myanmar"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
-"\n"
-"Click on Configure to launch the setup wizard."
-msgstr "Сумеснае Iнтэрнэт-злучэнне"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Auto allocate"
+msgstr "Размеркаваць аўтаматычна"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr "Праверыць на наяўнасць дрэнных блокаў?"
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
+msgid "Other MultiMedia devices"
+msgstr "Іншыя"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
+msgid "No remote machines"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication NIS"
+msgstr "Аўтэнтыфiкацыя NIS"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"Option ``Restrict command line options'' is of no use without a password"
 msgstr ""
-"Усе адканфігуравана.\n"
-"Зараз вы можаце сумесна выкарыстоўваць падключэнне да Internet\n"
-"з іншымі камп'ютэрамі ў  вашай ЛВС, карыстаючыся аўтаматычным\n"
-"канфігураваннем (DHCP)."
-
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
-#, c-format
-msgid "Problems installing package %s"
-msgstr "Праблемы з усталяваннем пакету %s"
+"Опцыя ``Абмежаванне опцыяў каманднага радку'' не выкарыстоўваецца без пароля"
 
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "Канфігурацыя сцэнараў, усталяванне ПЗ, запуск службаў..."
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Configuring..."
-msgstr "Настройка IDE"
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
 
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Патэнцыйны адрас ЛВС канфлiктуе з бягучай канфiгурацыяй %s!\n"
+msgid "Card IO_0"
+msgstr "IO_0 карты"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "United Arab Emirates"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Card IO_1"
+msgstr "IO_1 карты"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
+msgid "Thailand"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "The default lease (in seconds)"
+msgid "Routers:"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The DHCP end range"
+msgid "Kazakhstan"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP start range"
+msgid "Display all available remote CUPS printers"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Iмя друкаркi"
+#: ../../install_steps_newt.pm:1
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr "Усталяванне Mandrake Linux %s"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "IP сервера SMB"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Thai keyboard"
+msgstr "Тайская клавiятура"
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "IP сервера SMB"
+#: ../../network/modem.pm:1
+#, c-format
+msgid "Dialup options"
+msgstr "Параметры камутаванага злучэння (Dialup)"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
+msgid "Bouvet Island"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "сеткавая карта не знойдзена"
-
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
+msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Current configuration of `%s':\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
+"Змянiце ваш Cd-Rom!\n"
+"\n"
+"Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк "
+"пасля.\n"
+"Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага "
+"Cd."
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Polish"
+msgstr "Польскi"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "Настройка злучэння з Iнтэрнэтам"
+msgid "Mandrake Online"
+msgstr "Далучэнне да Iнтэрнэту"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No (experts only)"
+msgid "\t-Network by webdav.\n"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Настройка мадэму"
-
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
-"\n"
-"Do you want an automatic re-configuration?\n"
-"\n"
-"You can do it manually but you need to know what you're doing."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
+"Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, "
+"скарыстайце канфiгурацыйны iнструмэнт."
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
+#, c-format
+msgid "Netmask"
+msgstr "Маска сеткi"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "Манiтор пакуль не настроены"
+msgid "No hard drives found"
+msgstr "Лакальны прынтэр"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr ""
-"Калi ласка, абярыце сеткавы адаптар, які будзе выкарыстаны для далучэння да "
-"вашай лакальнай сеткi."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
-"\n"
-"I am about to setup your Local Area Network with that adapter."
-msgstr ""
+msgid "2 buttons"
+msgstr "2 РєРЅРѕРїРєi"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Сеткавы iнтэрфейс"
+msgid "What kind is your ISDN connection?"
+msgstr "Якi тып вашага ISDN злучэння?"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr ""
-"Нi водны ethernet сеткавы адаптар у вашай сiстэме не вызначаны. Калi ласка, "
-"скарыстайце канфiгурацыйны iнструмэнт."
+msgid "Label"
+msgstr "Метка"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+msgid "Save on floppy"
+msgstr "Захаванне на дыскету"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Interface %s"
-msgstr "Сеткавы iнтэрфейс"
+msgid "Printer auto-detection"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "Якая ў вас ISDN карта?"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
 msgstr ""
+"NFS - гэта вядомы пратакол для доступу да файлаў праз TCP/IP сеткi.\n"
+"Гэтая служба забяспечваецца NFS серверам, якi канфiгурыруеца праз\n"
+"/etc/exports файл."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "Сервер друку"
+msgid "Msec"
+msgstr "Порт мышы"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"=> Notice, a label changed:\n"
+"%s"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
+#, c-format
+msgid "Number of capture buffers:"
+msgstr ""
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Ваш выбар? (змоўчанне %s) "
+
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
-"Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n"
-" Інтэрнэту (Internet Connection Sharing)?\n"
+"Усе раздзелы, якія былі толькі вызначаны павінны быць\n"
+"адфарматаваны (фарматаваць - значыць стварыць файлаваю сістэму).\n"
 "\n"
-"Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n"
 "\n"
-"Вы жадаеце усталяваць сумесны доступ да Internet?"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Сумеснае Iнтэрнэт-злучэнне"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
+"У той жа час, вы можаце перафарматаваць ужо існуючыя раздзелы, каб сцёрці\n"
+"дадзеныя якія яны ўтрымліваюць. Калі вы жадаеце зрабіць гэта, абярыце "
+"раздзелы\n"
+"якія жадаеце адфарматаваць.\n"
+"\n"
+"\n"
+"Заўважце, вы павінны перафарматаваць усе створаныя раздзелы. Вы павінны\n"
+"перафарматаваць раздзелы, якія ўтрымліваюць аперацыйную сістэму (тыпу \"/"
+"\",\n"
+"\"/usr\" ці \"/var\"), але не павінны перафарматаваць раздзелы, якія "
+"утрымліваюць\n"
+"дадзеныя, якія вы жадаеце захаваць (звычайна /home).\n"
+"\n"
+"\n"
+"Калі ласка, будзце ўважлівыя, абіраючы раздзелы, бо пасля фарматавання\n"
+"усе дадзеныя будуць незваротна выдаленыя.\n"
+"\n"
+"\n"
+"Націсніце \"Так\" калі вы гатовыя фарматаваць раздзеля.\n"
+"\n"
+"\n"
+"Націсніце \"Адмена\" калі жадаеце абраць іншыя раздзелы для "
+"усталяваннявашай\n"
+"новай аперацыйнай сістэмы Mandrake Linux."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr ""
+msgid "French"
+msgstr "Французскi"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "dismiss"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Чешскi (QWERTY)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/service_harddrake:1
 #, fuzzy, c-format
-msgid "reconfigure"
-msgstr "Настройка X Window"
+msgid "Hardware probing in progress"
+msgstr "Дубляванне пункту манцiравання %s"
 
 #: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "enable"
-msgstr "Таблiца"
+msgid "Net Device"
+msgstr "Сервер друку"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Summary"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Сумеснае Iнтэрнэт-злучэнне зараз забаронена"
+msgid "Next"
+msgstr "РўСЌРєСЃС‚"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, fuzzy, c-format
-msgid "Disabling servers..."
-msgstr "Вызначэнне прыладаў..."
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "CHAP"
+msgstr "CHAP"
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "disable"
-msgstr "Таблiца"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
 "\n"
-"What would you like to do?"
+"Welcome.\n"
+"\n"
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
-
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Puerto Rico"
 msgstr ""
 
-#: ../../standalone/drakhelp:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Path"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group :"
-msgstr "Працоўная група"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user :"
-msgstr "Iмя карыстальнiку:"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "Асабiсты выбар пакетаў"
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Лiтоўскi \"нумар радка\" QWERTY"
 
-#: ../../standalone/drakperm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use group id for execution"
+msgid "Anguilla"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use owner id for execution"
-msgstr ""
+msgid "NIS Domain"
+msgstr "NIS Domain"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-GID"
-msgstr ""
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Set-UID"
+"\n"
+"- User Files:\n"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "sticky-bit"
+msgid "Antarctica"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Property"
-msgstr "РџРѕСЂС‚"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "Версiя: %s\n"
-
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Current user"
-msgstr "Прыняць карыстальнiка"
+msgid "Mount options"
+msgstr "Опцыi модулю:"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "browse"
+msgid "Jamaica"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Edit current rule"
+msgid ""
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "edit"
-msgstr "РЎСЏСЂСЌРґРЅi"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "Выдалiць чаргу друку"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "Знiшчыць"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "Iмя друкаркi"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "Дадаць карыстальнiка"
-
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Move selected rule down one level"
+msgid ""
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Down"
-msgstr "Зроблена"
-
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Please wait, preparing installation..."
+msgstr "Падрыхтоўка ўсталяваньня"
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Up"
-msgstr ""
+msgid "Czech (QWERTZ)"
+msgstr "Чешскi (QWERTZ)"
 
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "select perm file to see/edit"
+msgid "Track network card id (useful for laptops)"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "The port number should be an integer!"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "permissions"
-msgstr "Раздзел %s"
+msgid "You must choose an image file first!"
+msgstr "URI прынтэру"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "group"
-msgstr "Працоўная група"
+msgid "Restore from Hard Disk."
+msgstr "Аднаўленне з дыскеты"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "user"
-msgstr "Iмя карыстальнiку:"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Add to LVM"
+msgstr "Дадаць да LVM"
 
-#: ../../standalone/drakperm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "path"
-msgstr ""
+msgid "DNS server"
+msgstr "DNS сервер"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Стварэнне дыскеты для ўсталявання"
+#: ../../lang.pm:1
+#, c-format
+msgid "Trinidad and Tobago"
+msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
+msgid "LPD and LPRng do not support IPP printers.\n"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "simple"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Лакальны прынтэр"
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Clear all"
+msgstr "Ачысцiць усё"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Заканчэнне настройкi"
+msgid "No test pages"
+msgstr "Так,  надрукаваць абедзве старонкi тэксту"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Adapter %s: %s"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The DHCP end ip"
+msgid "Falkland Islands (Malvinas)"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP start ip"
+msgid "Unknown model"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Сеткавы iнтэрфейс"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr ""
-"Калi ласка, пазначце сеткавы адаптар, якi плануеце выкарыстоўваць для "
-"далучэння да iнтэрнэт"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+msgid "if set to yes, check files/directories writable by everybody."
 msgstr ""
-"Ваш камп'ютар можа быць сканфігураваны на сумеснае выкарыстанне\n"
-" Інтэрнэту (Internet Connection Sharing)?\n"
-"\n"
-"Заўвага: вам патрэбны сеткавы адаптар для падключэння да ЛВС.\n"
-"\n"
-"Вы жадаеце усталяваць сумесны доступ да Internet?"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "Заканчэнне настройкi"
-
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "Заканчэнне настройкi"
+msgid "authentication"
+msgstr "Аўтэнтыфiкацыя"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "Падрыхтоўка ўсталяваньня"
+msgid "Backup Now"
+msgstr "Настр. файлавых сiстэмаў"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "Настройкi ўзроўня бяспекi"
+msgid "/_File"
+msgstr "Файлы:\n"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "System Options"
-msgstr "Опцыi модулю:"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "Опцыi модулю:"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Tamil (ISCII-layout)"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+msgid "Mayotte"
 msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "Опцыi аддаленага прынтэру lpd"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "Стварэнне дыскеты для ўсталявання"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "Настройкi ўзроўня бяспекi"
+msgid "Searching for scanners ..."
+msgstr "Даступныя пакеты"
 
-#: ../../standalone/draksec:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Security Level:"
-msgstr "Настройкi ўзроўня бяспекi"
+msgid "Partitioning"
+msgstr "Прынтэр"
 
-#: ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " ? (змоўчанне %s) "
+msgid "Russia"
+msgstr "Р СѓСЃРєi"
 
-#: ../../standalone/draksec:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
-"\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
-"\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
-"\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
+msgid "ethernet card(s) detected"
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+msgid "Syslog"
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+msgid "Can't create catalog!"
 msgstr ""
 
-#: ../../standalone/draksound:1
-#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "Размеркаванне"
-
-#: ../../standalone/draksplash:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "Вызначэнне прыладаў..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "URI прынтэру"
-
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "Злучэнне прынтэру"
+msgid "Not enough free space for auto-allocating"
+msgstr "Не хапае прасторы для стварэння новых раздзелаў"
 
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
-msgstr ""
+msgid "Set root password"
+msgstr "Пароль для root"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "Абярыце дзеянне"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Абярыце дзеянне"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "Усе дадзеныя ў раздзеле %s будуць страчаны"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "Настройка службаў"
+msgid "Internet connection configuration"
+msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Make kernel message quiet by default"
+msgid "Scanning for TV channels"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Display logo on Console"
+msgid "Kernel:"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Choose color"
-msgstr "Абярыце манiтор"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Save theme"
-msgstr "Усталяванне сiстэмы"
+msgid "/_About..."
+msgstr "Адмянiць"
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Preview"
-msgstr "прылада"
+msgid "Bengali"
+msgstr "Таблiца"
 
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr ""
+msgid "Preference: "
+msgstr "Параметры: "
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "Wizard..."
+msgstr "Майстар стварэння..."
 
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "the width of the progress bar"
+msgid "Services: %d activated for %d registered"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "Стварыць загр. дыск"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+msgid "Solomon Islands"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "text box height"
-msgstr ""
+msgid "(module %s)"
+msgstr "(модуль %s)"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "text width"
-msgstr ""
+msgid "Workgroup"
+msgstr "Працоўная група"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP"
+msgstr "Iмя прынтэру"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid "Name of printer should contain only letters, numbers and the underscore"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Browse"
-msgstr "Прагляд"
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Show current interface configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../standalone/draksplash:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Theme name"
-msgstr "Iмя для размеркаванага рэсурсу"
+msgid "Development"
+msgstr "распрацоўшчык"
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Done"
+msgstr "Зроблена"
+
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "final resolution"
-msgstr "Памеры экрану"
+msgid "Web Server"
+msgstr "сервер"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "first step creation"
-msgstr "Настройка пасля ўсталявання"
+msgid "Chile"
+msgstr "Порт мышы"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(ужо дададзена %s)"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid ", using command %s"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Have a nice day!"
+msgid "Alt and Shift keys simultaneously"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "XawTV isn't installed!"
+msgid "Flags"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Атрымалася памылка ўпарадкавання пакетаў:"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Add/Del Users"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Area:"
+msgid "Host/network IP address missing."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "TV norm:"
+msgid "weekly"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "Settings"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "Newzealand"
+msgid "Here is the full list of available countries"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "Францыя"
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "East Europe"
-msgstr "Еўропа"
-
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "West Europe"
-msgstr "Еўропа"
+msgid "Alternative test page (A4)"
+msgstr "Друк тэставых старонак"
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "China (broadcast)"
+msgid ""
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"Калi вы маеце ўсе CD дыскi са спiса нiжэй, нацiснiце Ок.\n"
+"Калi вы не маеце анi воднага з гэтых CD дыскаў, нацiснiце Адмянiць.\n"
+"Калi некаторых з CD дыскаў не маеце, адмянiце iх выдзяленне i нацiснiце Ок."
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Japan (cable)"
+msgid "Wait please"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "Канадскi (Квебэк)"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Backup user files"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "New"
+msgstr "РќРѕРІС‹"
 
-#: ../../standalone/drakxtv:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
-msgid "primary"
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "secondary"
-msgstr "%d секундаў"
+msgid "Load from floppy"
+msgstr "Аднаўленне з дыскеты"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "Наступныя пакеты будуць выдалены"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "Boot Floppy"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "Нарвежскi"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown"
-msgstr "Агульны"
+msgid "Searching for new scanners ..."
+msgstr "Даступныя пакеты"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "unknown"
+msgid "Apache World Wide Web Server"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "Чытаю базу дадзеных драйвероў CUPS"
-
-#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Run config tool"
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Configure module"
-msgstr "Настройка мышы"
+msgid "select path to restore (instead of /)"
+msgstr "калi ласка, пазначце тып вашай мышы."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Information"
-msgstr "Iнфармацыя"
+msgid "Configure bootsplash picture"
+msgstr "Настройка службаў"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "Гл. апiсанне абсталявання"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "Вызначэнне жорсткага дыску"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "Да якога паслядоўнага порту далучаны мадэм?"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "Дубляванне пункту манцiравання %s"
+msgid "Georgia"
+msgstr "Нарвежскi"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Author:"
-msgstr "Аўтапошук"
+msgid "Reading data of installed printers..."
+msgstr "Даступныя пакеты"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+msgid " Erase Now "
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr ""
+msgid "server"
+msgstr "сервер"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_any.pm:1
 #, fuzzy, c-format
-msgid "/_About..."
-msgstr "Адмянiць"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Устаўце дыскету ў дыскавод %s"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "/_Report Bug"
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Please Wait... Applying the configuration"
+msgstr "Праверка параметраў настройкi"
+
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Welcome to GRUB the operating system chooser!"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "Абярыце вiдэакарту"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Harddrake help"
+msgid " on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "Апiсанне"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Дапамога"
+msgid "Choosing a display manager"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "/_Quit"
-msgstr "Выхад"
+msgid "Zeroconf Host name"
+msgstr "Iмя машыны"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "Аддалены прынтэр"
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "Аддалены прынтэр"
+#: ../../lang.pm:1
+#, c-format
+msgid "Ecuador"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "Аддалены прынтэр"
+msgid "Add an item"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/_Options"
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "the vendor name of the processor"
+msgid "I can't find needed image file `%s'."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "the vendor name of the device"
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Калi ласка, пазначце послядоўны порт, да якога падключана вашая мыш."
-
-#: ../../standalone/harddrake2:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "фарматаванне"
+#: ../../any.pm:1
+#, c-format
+msgid "Shell"
+msgstr "Абалонка:"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "the number of the processor"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Processor ID"
+msgid "Sao Tome and Principe"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "Сеткавы прынтэр (TCP/Socket)"
-
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "the name of the CPU"
+msgid "Can't login using username %s (bad password?)"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "IРјСЏ: "
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Azerbaidjani (latin)"
+msgstr "Азербайджанскі (latin)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 РєРЅРѕРїРєi"
+msgid "Package not installed"
+msgstr "Заканчэнне ўсталявання"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 РєРЅРѕРїРєi"
+msgid "Become a MandrakeExpert"
+msgstr "эксперт"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Official vendor name of the cpu"
+msgid "American Samoa"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Protocol"
+msgstr ""
+
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Model name"
-msgstr "Опцыi модулю:"
+msgid "Copy fonts on your system"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid "Harddrake help"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Порт мышы"
+#, c-format
+msgid "Bogomips"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Адрасы памяці карты (DMA)"
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "class of hardware device"
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Media class"
+msgid "Restore all backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Sub generation of the cpu"
+msgid "if set to yes, check open ports."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "узровень"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Format of floppies supported by the drive"
+msgid "This may take a moment to erase the media."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "Фарматаванне"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "Вы не можаце вылучаць і адмяняць вылучэнне гэтага пакету"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Увага!"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"- Other Files:\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote host name"
+msgstr "Аддалены вузел"
+
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "deactivate now"
+msgstr "Актыўны"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Halt bug"
+msgid "access to X programs"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
+
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Italy"
+msgstr "Iтальянскi"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "Name of printer"
+msgstr "Iмя друкаркi"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "disable"
+msgstr "Таблiца"
+
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "памылка разманцiравання %s: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgid "Do it!"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
+msgid "Cayman Islands"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select model manually"
+msgstr "Аддалены прынтэр"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Format"
+msgstr "Фарматаванне"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Fdiv bug"
+msgid "Various"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
+msgid "Zip"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Flags"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Module"
-msgstr "Порт мышы"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "PDQ"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "New devfs device"
-msgstr "Прылада-шлюз"
+msgid "Albanian"
+msgstr "Iранскi"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "old static device name used in dev package"
+msgid "Lithuania"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "Кампактна"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Old device file"
-msgstr "Абярыце файл"
+msgid "Detected model: %s %s"
+msgstr "Дубляванне пункту манцiравання %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "This field describes the device"
+msgid "MandrakeSoft has selected the best software for you"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Local files"
+msgstr "Лакальны прынтэр"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Настройкi ўзроўня бяспекi"
+msgid "maybe"
+msgstr "можа быць"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid "Panama"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Cpuid family"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Monitor"
+msgstr "Манiтор"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Coma bug"
+msgid ""
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "65 тысяч колераў (16 бiтаў)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Drive capacity"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "Памер: %d Kб\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Cache size"
-msgstr "памер блоку"
+msgid "Remove fonts on your system"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
 msgstr ""
 
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphical interface at startup"
+msgstr "Запуск X пры старце сiстэмы"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Location on the bus"
+msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Недастаткова раздзелаў для RAID узроўня %d\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
 msgstr ""
+"Тут змяшчаюцца чэргi друку.\n"
+"Вы можаце дадаць яшчэ, альбо змянiць iснуючыя."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Bus identification"
-msgstr "Аўтэнтыфiкацыя"
+msgid "Connected"
+msgstr "Iмя злучэння"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "Iмя друкаркi"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bogomips"
+msgid "Macedonian"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "EIDE/SCSI channel"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "Адмена"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "/File/_Save"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bus"
+msgid "Mali"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "Падрабязнасцi"
+
+#: ../../pkgs.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+msgid "very nice"
+msgstr "вельмi добра"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "Друк тэставых старонак"
+msgid "Preview"
+msgstr "прылада"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "Аддалены прынтэр"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please select media for backup..."
+msgstr "Калi ласка, абярыце мову для карыстання."
+
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Вы жадаеце каб BackSpace працаваў у кансолі як Delete?"
+msgid "XFree86 server: %s\n"
+msgstr "Сервер XFree86: %s\n"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Калi ласка, абярыце тып клавiятуры."
+msgid "Allow Thin Clients"
+msgstr ""
 
-#: ../../standalone/livedrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Немагчыма запусціць live upgrade !!!\n"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Грузiнскi (\"Руская\" раскладка)"
 
-#: ../../standalone/livedrake:1
-#, fuzzy, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Options"
 msgstr ""
-"Змянiце ваш Cd-Rom!\n"
-"\n"
-"Калi ласка, устаўце Cd-Rom, пазначаны \"%s\", у ваш дыскавод i нацiснiце Oк "
-"пасля.\n"
-"Калi вы не маеце яго, нацiснiце Адмянiць, каб адмянiць усталяванне з гэтага "
-"Cd."
 
-#: ../../standalone/livedrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Change Cd-Rom"
-msgstr "Змянiць памеры экрану"
+msgid "Your printer model"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/localedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Save as.."
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakpxe:1
+#, c-format
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
+
+#: ../../share/advertising/04-configuration.pl:1
 #, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "Паспрабуйце яшчэ раз"
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
 #: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "alert configuration"
-msgstr "Настройка"
+msgid "Save"
+msgstr "Стартавае меню"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "The %s is unsupported"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../services.pm:1
+#, c-format
+msgid "Load the drivers for your usb devices."
+msgstr ""
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "load setting"
-msgstr "фарматаванне"
+msgid "Disk"
+msgstr "Дацкi"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "URI прынтэру"
+
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "service setting"
-msgstr "прылада"
+msgid "Israel"
+msgstr "Iўрыт"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "Сервер друку"
+msgid "French Guiana"
+msgstr "Французскi"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "прылада"
+#: ../../lang.pm:1
+#, c-format
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "SSH Server"
-msgstr "NIS сервер:"
+msgid "add a rule"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "A command line must be entered!"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Select user manually"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Samba Server"
-msgstr "NIS сервер:"
+msgid "Transfer printer configuration"
+msgstr "Настройка злучэння з Iнтэрнэтам"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "Сервер друку"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Вы жадаеце, каб гэтае злучэнне стартавала пры загрузцы?"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
+
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "NIS сервер:"
+msgid "%s (Port %s)"
+msgstr "РџРѕСЂС‚"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Iмя дамену"
+msgid "Use network connection to backup"
+msgstr "Дрэнны файл рэзервовай копii"
 
-#: ../../standalone/logdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Apache World Wide Web Server"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
 "\n"
-"Here, you'll be able to set up the alert system.\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1 ../../help.pm:1
+#, c-format
+msgid "Accept user"
+msgstr "Прыняць карыстальнiка"
+
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "Настройка ADSL"
+msgid "Server"
+msgstr "сервер"
 
-#: ../../standalone/logdrake:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Дрэнны выбар, паспрабуйце яшче\n"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
+msgid "Heard and McDonald Islands"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Content of the file"
+msgid "No alternative driver"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Calendar"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Рэжым эксперту"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Choose file"
+msgid "(on this machine)"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr ""
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "IP адрас павiнен быць у фармаце 1.2.3.4"
 
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "matching"
+msgid ""
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Looking at packages already installed..."
+msgstr "Вы не можаце адмянiць вылучэнне гэтага пакету. Ён ужо ўсталяваны"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Settings"
+msgid "Use Differential Backups"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Driver"
+msgstr "сервер"
+
+#: ../../services.pm:1
 #, c-format
-msgid "A tool to monitor your logs"
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer on remote lpd server"
+msgstr "Аддалены сервер lpd"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "search"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
+msgid ""
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Syslog"
-msgstr ""
+msgid "No mouse"
+msgstr "Няма мышы"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "Праверка партоў"
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Germany"
+msgstr "Нямецкi"
 
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "User"
-msgstr "Iмя карыстальнiку:"
+msgid "Austria"
+msgstr "паслядоўная"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "/Help/_About..."
+msgid "Run \"sndconfig\" after installation to configure your sound card"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr ""
+msgid "Collapse Tree"
+msgstr "Згарнуць дрэва"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/-"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "Настройка пасля ўсталявання"
 
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "/File/Save _As"
-msgstr ""
+msgid "Configure networking"
+msgstr "Настройка сеткi"
 
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "<control>S"
-msgstr ""
+msgid "Where do you want to install the bootloader?"
+msgstr "Куды вы жадаеце ўсталяваць пачатковы загрузчык?"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "/File/_Save"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "<control>O"
+msgid "The %s is not supported by this version of Mandrake Linux."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "/File/_Open"
+msgid "DHCP client"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "<control>N"
-msgstr ""
+msgid "Restoring from file %s failed: %s"
+msgstr "Аднаўленне з файла %s не атрымалася: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "/File/_New"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (паслядоўная, стары тып C7)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Show only for the selected day"
+msgid "Are you sure that you want to set up printing on this machine?\n"
 msgstr ""
 
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "Эмуляваць трэцюю кнопку?"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "New devfs device"
+msgstr "Прылада-шлюз"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "калi ласка, пазначце тып вашай мышы."
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Connect %s"
-msgstr "Iмя злучэння"
+msgid "Boot Style Configuration"
+msgstr "Настройка мадэму"
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "Настройка ISDN"
+msgid "Automatic time synchronization"
+msgstr "Настройка мадэму"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
+msgid "Backup files not found at %s."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "received"
+msgid "Thank you for choosing Mandrake Linux 9.1"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "transmitted"
-msgstr ""
+msgid "Armenian (phonetic)"
+msgstr "Армянскi (фанетычны)"
 
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received: "
-msgstr ""
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Card model:"
+msgstr "Адрасы памяці карты (DMA)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "sent: "
+msgid "Thin Client"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Local measure"
-msgstr "Лакальны прынтэр"
+msgid "Start Server"
+msgstr "NIS сервер:"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "average"
+msgid "Turkmenistan"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Color configuration"
-msgstr "Настройка"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
+msgid "All remote machines"
+msgstr "Аддалены прынтэр"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Connection complete."
-msgstr "Iмя злучэння"
+msgid "Install themes"
+msgstr "Усталяванне сiстэмы"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Disconnection from the Internet complete."
+msgid ""
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
+msgid "Espanol"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "Далучэнне да Iнтэрнэту"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Далучэнне да Iнтэрнэту"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Якi тып вашага ISDN злучэння?"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing installation"
+msgstr "Падрыхтоўка ўсталяваньня"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logs"
+msgid "Edit selected host/network"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "Iмя злучэння"
+msgid "Add User -->"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Receiving Speed:"
+msgid "Nauru"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "Захаванне ў файл"
+msgid "True Type fonts installation"
+msgstr "Падрыхтоўка ўсталяваньня"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Statistics"
+msgid "Auto-detect printers connected directly to the local network"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "памылка манцiравання: "
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "Канфiгурацыя сеткi"
+msgid "LAN configuration"
+msgstr "Настройка ADSL"
 
-#: ../../standalone/printerdrake:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Даступныя пакеты"
+msgid "hard disk model"
+msgstr "Адрасы памяці карты (DMA)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Name/IP address of host:"
+msgid "You can't use a LVM Logical Volume for mount point %s"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid "Get Windows Fonts"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Абярыце вiдэакарту"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Iranian"
+msgstr "Iранскi"
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Калі ласка, зрабіце некалькі рухаў мышшу."
+msgid "Croatia"
+msgstr "Харвацкi"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
+msgid "Gateway:"
+msgstr "Шлюз:"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Даступныя пакеты"
+msgid "Add server"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remote printer name"
+msgstr "Аддалены прынтэр"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "This machine"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "Прылада:"
+
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Выдалiць чаргу друку"
+msgid "Printerdrake"
+msgstr "Прынтэр"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "Ліцэнзійная дамова"
+
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "Выдалiць чаргу друку"
+msgid "System Options"
+msgstr "Опцыi модулю:"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please enter the directory where backups are stored"
+msgstr ""
+
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Add host"
-msgstr "Дадаць карыстальнiка"
+msgid "Please choose the desired security level"
+msgstr "Узровень бяспекi"
 
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Выкарыстоўваць незанятую прастору"
+msgid ", USB printer"
+msgstr "Iмя друкаркi"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "All remote machines"
-msgstr "Аддалены прынтэр"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Выбар раздзелаў для фарматавання"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
+msgid "Configure X"
+msgstr "Настройка X Window"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Турэцкi (традыцыёная \"F\" мадэль)"
 
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
 #: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Use scanners on remote computers"
+msgid "Congratulations!"
+msgstr "Прыміце вiншаваннi!"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Use owner id for execution"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Прынтэр"
+msgid "Down"
+msgstr "Зроблена"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
+msgid "Raw printer (No driver)"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Install rpm"
+msgstr "Усталёўка"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "Time remaining "
+msgstr "Засталося часу "
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
-msgstr ""
+msgid "UK keyboard"
+msgstr "UK клавiятура"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Даступныя пакеты"
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "Разманцiраваць"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Даступныя пакеты"
+msgid "Uninstall Fonts"
+msgstr "Выдаленне выбраных RPM-пакетаў з сiстэмы"
 
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
 #, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Прынтэр"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Add a scanner manually"
+msgid "German (no dead keys)"
+msgstr "Нямецкi (няма заблакiраваных клавiш)"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transferring %s..."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Даступныя пакеты"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "32 thousand colors (15 bits)"
+msgstr "32 тысячы колераў (15 бiтаў)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+msgid "Reboot"
+msgstr "Root"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Gambia"
+msgstr ""
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
+msgid "Mandrake Control Center"
+msgstr "Далучэнне да Iнтэрнэту"
+
+#: ../../network/drakfirewall.pm:1
+#, c-format
 msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "choose device"
-msgstr "Загрузачная прылада"
+msgid "\t-Tape \n"
+msgstr "Тып: "
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Please select the device where your %s is attached"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Даступныя пакеты"
+msgid "Remember this password"
+msgstr "Няма паролю"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Аддалены прынтэр"
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Сумеснае Iнтэрнэт-злучэнне зараз магчыма"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
+msgid "\t-Network by SSH.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
 
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Выкарыстоўваць незанятую прастору на раздзеле Windows"
+
 #: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "Жадаеце настроiць прынтэр?"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "The %s is unsupported"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "XFree86 driver: %s\n"
+msgstr "Сервер XFree86: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "РџРѕСЂС‚"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "Выбар пакетаў для ўсталявання"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", "
+msgid "Papua New Guinea"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "Дубляванне пункту манцiравання %s"
+msgid "Serbian (cyrillic)"
+msgstr "Азербайджанскі (кірыліца)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid " ("
+msgid "Make kernel message quiet by default"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Абярыце вiдэакарту"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "Жадаеце пратэсцiраваць друк?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "Жадаеце настроiць прынтэр?"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "Стварэнне загрузачнай дыскеты"
 
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "Дубляванне пункту манцiравання %s"
+msgid "Wait please, testing your connection..."
+msgstr "Якi тып вашага ISDN злучэння?"
 
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "Адлучэнне ад сеткi"
 
-#: ../../standalone/service_harddrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Login ID"
+msgstr "IРјСЏ (login ID)"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS -  гэта вядомы пратакол для доступу да файлаў праз TCP/IP\n"
+"сеткi. Гэтая служба ўплывае на наяўнасць сувязi памiж NFS файламi."
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Welcome to the Open Source world."
+msgid "DHCP Client"
 msgstr ""
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
+msgid "dismiss"
 msgstr ""
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "Адлучэнне ад сеткi"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
+msgid "omit raid modules"
 msgstr ""
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd - гэты дэман друку, патрэбны для карэктнай працы lpr. Гэта\n"
+"сервер, якi кiруе працай прынтэру(аў)."
 
-#: ../../share/advertising/02-community.pl:1
-#, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Internet Connection Configuration"
+msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "comma separated numbers"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid "Move selected rule up one level"
 msgstr ""
 
-#: ../../share/advertising/04-configuration.pl:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
 msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "У вашай сістэме няма нiводнага сеткавага адаптара!"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Настройка злучэння з Iнтэрнэтам"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Цi жадаеце пратэсцiраваць настройкi?"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid "I can't find any room for installing"
+msgstr "Дадаць раздзел немагчыма"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "Лакальны прынтэр"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Змянiць RAID"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
+"Вызначана ISDN PCI карта, але невядомы яе тып. Калi ласка, пазначце PCI "
+"карту на наступным экране."
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Add user"
+msgstr "Дадаць карыстальнiка"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "RAID-дыскi %s\n"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "паслядоўная"
+
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Выбар клавiятуры"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+msgid "Format partitions"
+msgstr "Фарматаванне раздзелаў"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Настройка мадэму"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "Чытаю базу дадзеных драйвероў CUPS"
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The official MandrakeSoft Store"
+msgid "enable radio support"
 msgstr ""
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "Прынтэр"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Iмя файлу вiртуальнай файлавай сiстэмы: %s"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Да якога паслядоўнага порту далучаны мадэм?"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid "Do not transfer printers"
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Затрымка перад загрузкай вобразу па дамаўленню"
+
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Націсніце на раздзел"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "Iмя карыстальнiку:"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Дрэнны файл рэзервовай копii"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Configure"
+msgstr "Настройка X Window"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Абярыце вiдэакарту"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid ""
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "Backup Users"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"Увядзiце iмя сваёй машыны (host).\n"
+"Iмя вашай машыны павiнна быць зададзена поўнасцю,\n"
+"напрыклад ``mybox.mylab.myco.com''.\n"
+"Вы можаце таксама ўвесцi IP адрас шлюзу, калi ён у вас ёсць."
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "Выбар тыпу злучэння прынтэру"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "Стварэнне новага раздзелу"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
+msgid "Mandrake Tools Explanation"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Лакальны прынтэр"
+
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Некаторыя важныя пакеты не былi ўсталяваны карэктна.\n"
+"Другi ваш cdrom дыск цi ваш cdrom маюць дэфекты.\n"
+"Праверце cdrom на вашым кампутары, выкарыстоўваючы\"rpm -qpl Mandrake/RPMS/*."
+"rpm\"\n"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "Дубляванне пункту манцiравання %s"
+
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run the daily security checks."
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "эксперт"
+msgid "Azerbaijan"
+msgstr "Iранскi"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "Як прынтар далучаны?"
+
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "эксперт"
+msgid "Security level"
+msgstr "Настройкi ўзроўня бяспекi"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Памеры экрану"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services"
+msgstr "прылада"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 РњР±"
 
 #: ../../share/compssUsers:999
 #, fuzzy
@@ -17024,11 +17062,6 @@ msgstr ""
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Workstation"
-msgstr "Навуковыя прыкладанні"
-
-#: ../../share/compssUsers:999
-#, fuzzy
 msgid "Game station"
 msgstr "Мультымедыя - гук"
 
@@ -17108,10 +17141,6 @@ msgstr ""
 "інструментальных сродкаў"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr ""
-
-#: ../../share/compssUsers:999
 #, fuzzy
 msgid "Gnome Workstation"
 msgstr "Навуковыя прыкладанні"
@@ -17133,11 +17162,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr ""
 
 #: ../../share/compssUsers:999
-#, fuzzy
-msgid "Development"
-msgstr "распрацоўшчык"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "Бібліятэкі і праграмы для распрацоўкі на С і С++"
 
@@ -17211,40 +17235,88 @@ msgstr ""
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Мультымедыя - гук"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Прыкладанні для чытання і адпраўкі пошты і навінаў (pine, mutt,  tin...), "
+"Web аглядальнікі"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Iнтэрнэт злучэнне i канфiгурацыя"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Рэдактары і прайгравальнікі гуку і відэа"
+#~ msgid "Configure the connection"
+#~ msgstr "Настройка сеткi"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Мультымедыя - гук"
+#~ msgid "Disconnect"
+#~ msgstr "Настройка ISDN"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Рэдактары і прайгравальнікі гуку і відэа"
+#~ msgid "Connect"
+#~ msgstr "Iмя злучэння"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Мультымедыя - гук"
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Графічныя праграмы тыпу The Gimp"
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Прыкладанні для чытання і адпраўкі пошты і навінаў (pine, mutt,  tin...), "
-"Web аглядальнікі"
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Вы можаце адключыцца ці пераканфігураваць вашае злучэнне."
+
+#, fuzzy
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "Як вы плануеце далучыцца да Iнтэрнэту?"
+
+#, fuzzy
+#~ msgid "Write %s"
+#~ msgstr "Сервер XFree86 %s"
+
+#, fuzzy
+#~ msgid "Author:"
+#~ msgstr "Аўтапошук"
+
+#, fuzzy
+#~ msgid "Audio station"
+#~ msgstr "Мультымедыя - гук"
+
+#, fuzzy
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Рэдактары і прайгравальнікі гуку і відэа"
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "Мультымедыя - гук"
+
+#, fuzzy
+#~ msgid "Video playing programs"
+#~ msgstr "Рэдактары і прайгравальнікі гуку і відэа"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Мультымедыя - гук"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "Графічныя праграмы тыпу The Gimp"
 
 #, fuzzy
 #~ msgid "Printer sharing"
diff --git a/perl-install/share/po/bg.po b/perl-install/share/po/bg.po
index 10964709c..f6e7d7368 100644
--- a/perl-install/share/po/bg.po
+++ b/perl-install/share/po/bg.po
@@ -3,1014 +3,1689 @@
 # Copyright (c) 2000 MandrakeSoft
 # Bozhan Boiadzhiev <bozhan@plov.omega.bg>, 2000.
 # Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>, 2003
+# Boyan Ivanov <boyan17@bulgaria.com>, 2003
 #
 #
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-bg\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
-"PO-Revision-Date: 2003-02-19 20:42+0200\n"
-"Last-Translator: Borislav Aleksandrov <B.Aleksandrov@cnsys.bg>\n"
-"Language-Team: Bulgarian <bg@li.org>\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
+"PO-Revision-Date: 2003-04-26 15:27+0300\n"
+"Last-Translator: Boyan Ivanov <boyan17@bulgaria.com>\n"
+"Language-Team: Bulgarian\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=CP1251\n"
 "Content-Transfer-Encoding: 8bit\n"
-"X-Generator: KBabel 1.0\n"
+"X-Generator: KBabel 1.0.1\n"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Scanning partitions to find mount points"
+msgstr "Претърсване на дяловете за намиране на точки на монтиране"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of suid root files."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\t\tErase=%s"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "network printer port"
+msgstr "порт на мрежов принтер "
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Please insert floppy disk:"
+msgstr "Сложете флопи дискета:"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "PCMCIA"
+msgstr "PCMCIA"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"The backup partition table has not the same size\n"
+"Still continue?"
 msgstr ""
+"Резервната таблица на дяловете не е със същата големина\n"
+"Да продължа ли все пак ?"
 
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Cancel"
-msgstr "Отказ"
+msgid "Which username"
+msgstr "Кое потребителско име"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Launch userdrake"
-msgstr "Стартира userdrake"
+msgid "Which type of entry do you want to add?"
+msgstr "Какъв тип информация искате да прибавите"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Restore partition table"
+msgstr "Възстанови таблицата с дяловете"
+
+#: ../../printer/cups.pm:1
+#, c-format
+msgid "On CUPS server \"%s\""
+msgstr "На CUPS сървър \"%s\""
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Post-install configuration"
+msgstr "След инсталационна настройка"
+
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``%s'' instead"
+msgstr "Вместо това използвайте ``%s''"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Type"
+msgstr "Вид"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
 "\n"
-"\"Custom\" permit a per-user granularity.\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
-"Искате ли да позволите на потребители да поделят техните директории?\n"
-"Разрешаването на това ще позволи на потребителите просто да цъкнат на "
-"\"Поделя\" в konqueror или nautilus.\n"
 "\n"
-"\"Клиентска\" позволява за потребител настройка.\n"
+"Също така, принтери настроени с PPD файлове предоставени от производителите "
+"им или с оригинални CUPS драйвери не могат да бъдат прехвърляни."
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
-msgstr "Задължителният пакет %s липсва"
+msgid "Sri Lanka"
+msgstr "Шри Ланка"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
-"Вие може да експортирате като използвате NFS или Samba. Моля, изберете какво "
-"искате да използвате."
+"Следния принтер\n"
+"\n"
+"%s%s\n"
+"е директно свързани към вашата система"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "Central African Republic"
+msgstr "Централноафриканска Република"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Gateway device"
+msgstr "Gateway устройство"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Net Method:"
 msgstr ""
-"Пакет %s трябва да бъде инсталиран\n"
-"Искате да го инсталирате?"
 
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Custom"
-msgstr "Клиентска"
+msgid "Ethernetcard"
+msgstr "Ethernet карта"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Allow all users"
-msgstr "Позволява на потребители"
+msgid "Parameters"
+msgstr "Параметри"
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "No sharing"
-msgstr "Не поделя"
+msgid "Auto-detect"
+msgstr "Автоматично засичане"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "More"
-msgstr "Още"
+msgid "Interface:"
+msgstr "Интерфейс:"
 
-#: ../../any.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Here is the full list of available countries"
-msgstr "Ето пълен списък на достръпните страни"
+msgid "Select installation class"
+msgstr "Избор на клас инсталация"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose your country."
-msgstr "Моля, изберете вашата страна."
+msgid "on CDROM"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "Риюниън"
+#: ../../network/tools.pm:1
+#, c-format
+msgid ""
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
+msgstr ""
+"Системата не изглежда свързана към Интернет.\n"
+"Опитайте се да пренастроите връзката."
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Country"
-msgstr "Страна"
+msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
+"\n"
+"Do you really want to continue setting up this printer as you are doing now?"
+msgstr ""
+"Свързва вашият принтер към Linux сървър и позволява Windows машини да се "
+"свързват към него като клиенти.\n"
+"\n"
+"Искате ли, да продължите настройките за този принтер както правехте до сега?"
 
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "Избор на език"
+#: ../../lang.pm:1
+#, c-format
+msgid "Belarus"
+msgstr "Беларус"
 
-#: ../../any.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Use Unicode by default"
-msgstr "Използва уникод по подразбиране"
+msgid "Error writing to file %s"
+msgstr "Грешка при запис във файла %s"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
-"Mandrake Linux може да подържа много езици. Изберете\n"
-"езиците които искате ад инсталирате. Те ще бъдат налични след\n"
-"като завърши инсталацията и вие престартирате системата."
+"apmd се използва за наблюдение на батерията и записвайки статуса чрез\n"
+"syslog. Може също да се използва за спиране на машината, когато батерията е "
+"изтощена."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please choose a language to use."
-msgstr "Моля, изберете език за използване."
+msgid "Use tape to backup"
+msgstr "Използва лента за резервно копие"
 
-#: ../../any.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Choose the window manager to run:"
-msgstr "Изберете мениджър на прозорци за стартиране:"
+msgid "The following packages are going to be installed"
+msgstr "Следните пакети ще бъдат инсталирани"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "Изберете подразбиращ се потребител :"
+msgid "CUPS configuration"
+msgstr "CUPS конфигурация"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Do you want to use this feature?"
-msgstr "Искате ли да използвате тази особеност?"
+msgid "Hong Kong"
+msgstr "Хонг Конг"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "I can set up your computer to automatically log on one user."
+msgid "Not enough free space to allocate new partitions"
+msgstr "Няма достатъчно място за създаване на нов дял"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving"
+msgstr "Местене"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
 msgstr ""
-"Мога да настроя компютъра ви за влизане в системата автоматично като някой "
-"потребител."
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Autologin"
-msgstr "Автоматично влиза"
+msgid "("
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Icon"
-msgstr "Икона"
+msgid ""
+"Welcome to The Network Configuration Wizard.\n"
+"\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
+msgstr ""
+"Добре дошли при магьосника за настройка на мрежа\n"
+"\n"
+"Вие сте на път да настроите Интернет/мрежовата си връзка.\n"
+"Ако не искате да използвате автоматично засичане, изключете кутийката.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "Shell"
-msgstr "Шел"
+msgid ")"
+msgstr ""
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Password (again)"
-msgstr "Парола (отново)"
+msgid "Lebanon"
+msgstr "Ливан"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Password"
-msgstr "Парола"
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "User name"
-msgstr "Потребителско име"
+msgid "Stop"
+msgstr "Стоп"
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "засечена %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Real name"
-msgstr "Истинско име"
+msgid "No CD device defined!"
+msgstr "Не е дифинирано CD устройство!"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "Приеми потребител"
+msgid "Bulgarian (phonetic)"
+msgstr "Българска (фонетичен)"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Done"
-msgstr "Готово"
+msgid "The DHCP start ip"
+msgstr ""
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "256 kB"
+msgstr "256 КБ"
 
 #: ../../any.pm:1
 #, c-format
+msgid "Bootloader main options"
+msgstr "Опции на зареждащата програма"
+
+#: ../../standalone.pm:1
+#, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
-"Въведете потребител\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Add user"
-msgstr "Добави потребител"
+msgid "Tape"
+msgstr "Лента"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "Това потребителско име вече е добавено"
+msgid "Scanning network..."
+msgstr "Стартиране мрежата...."
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The user name is too long"
-msgstr "Това име е твърде дълго"
+msgid ""
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgid "Malaysia"
+msgstr "Малайзия"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (French layout)"
+msgstr "Швейцарска (френски наредба)"
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid пропадна (може би raidtools липсват ?)"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Webcam"
 msgstr ""
-"Потребителското име може да включва само малки букви, номера, `-' и `_'"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "size of the (second level) cpu cache"
+msgstr "Размер на вторичен кеш на cpu"
+
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Please give a user name"
-msgstr "Моля, задайте потребителско име"
+msgid "Soundcard"
+msgstr "Звукова карта"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This password is too simple"
-msgstr "Тази парола е прекалено проста"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
+"За да изпечатате файл от командния ред (терминален прозорец) използвайте "
+"командата \"%s <file>\".\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please try again"
-msgstr "Моля, опитайте отново"
+msgid "Level %s\n"
+msgstr "Ниво %s\n"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The passwords do not match"
-msgstr "Паролите не съвпадат"
+msgid "Luxembourg"
+msgstr "Люксембург"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(already added %s)"
-msgstr "(вече прибавих %s)"
+msgid ""
+"\n"
+"                      DrakBackup Daemon Report\n"
+"\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to compilation tools"
-msgstr "достъп до инструменти за компилация"
+msgid "Iran"
+msgstr "Иран"
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "access to network tools"
-msgstr "достъп до мрежови инструменти"
+msgid "Bus"
+msgstr "Шина"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to administrative files"
-msgstr "достъп до файлове за администриране"
+msgid "Iraq"
+msgstr "Ирак"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "allow \"su\""
-msgstr "позволява \"su\""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "Възможен конфикт с адресите в LAN с настройката на %s!\n"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to rpm tools"
-msgstr "достъп до rpm инструменти"
+msgid "Configuring..."
+msgstr "Настройка ..."
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "access to X programs"
-msgstr "достъп до X програми"
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "Установката вече е направена и в момента е включена."
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
-"Това са различните записи.\n"
-"Можете да добавите още или да промените съществуващите."
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Other OS (windows...)"
-msgstr "Друга ОС (Windows...)"
+msgid "Password (again)"
+msgstr "Парола (отново)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Other OS (MacOS...)"
-msgstr "Друга ОС (MacOS...)"
+msgid "Search installed fonts"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Other OS (SunOS...)"
-msgstr "Друга ОС (SunOS...)"
+msgid "Venezuela"
+msgstr "Венецуела"
 
-#: ../../any.pm:1 ../../standalone/drakbackup:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Linux"
-msgstr "Linux"
+msgid "IP address"
+msgstr "IP адрес"
 
-#: ../../any.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "Какъв тип информация искате да прибавите"
+msgid "Choose the sizes"
+msgstr "Изберете големините"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This label is already used"
-msgstr "Този етикет вече се използва"
+msgid ""
+"List of data corrupted:\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "You must specify a root partition"
-msgstr "Трябва да зададете кореновият дял"
+msgid ""
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
+msgstr ""
+"Вашият модем не се поддържа от системата.\n"
+"Погледнете в http://www.linmodems.org"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You must specify a kernel image"
-msgstr "Трябва да зададете обаза на ядрото"
+msgid "Choose another partition"
+msgstr "Изберете друг дял"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Empty label not allowed"
-msgstr "Празен етикет не е разрешен"
+msgid "Current user"
+msgstr "Текущ потребител"
 
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Default"
-msgstr "По подразбиране"
+msgid "Username"
+msgstr "Потребителско име"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "NoVideo"
-msgstr "Без графика"
+msgid "Left \"Windows\" key"
+msgstr "Ляв \"Windows\" клавиш"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Initrd-size"
-msgstr "Initrd-големина"
+msgid "dhcpd Server Configuration"
+msgstr "Конфигуриране на dhcpd сървър"
 
-#: ../../any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Append"
-msgstr "Допълване"
+msgid ""
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Label"
-msgstr "Етикет"
+msgid "Guyana"
+msgstr "Гияна"
 
-#: ../../any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Unsafe"
-msgstr "Опасен"
+msgid " on Novell server \"%s\", printer \"%s\""
+msgstr " на Novell сървър \"%s\", принтер \"%s\""
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Table"
-msgstr "Таблица"
+msgid "Remove a module"
+msgstr "Премахни модула"
 
-#: ../../any.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Root"
-msgstr "Главен"
+msgid "Password"
+msgstr "Парола"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Read-write"
-msgstr "Четене-запис"
+msgid ""
+"Arguments: (max, inactive=-1)\n"
+"\n"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "Advanced Configuration"
+msgstr "Допълнителна конфигурация"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Video mode"
-msgstr "Видео режим"
+msgid "Scanning on your HP multi-function device"
+msgstr "Сканира на вашето HP многофункционално устройство"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Image"
-msgstr "Образ"
+msgid "Root"
+msgstr "Главен"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default OS?"
-msgstr "ОС по подразбиране ?"
+msgid "Choose an existing RAID to add to"
+msgstr "Изберете съществуващ RAID за прибавяне"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Enable OF Boot?"
-msgstr "Стартиране от OF ?"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "Турска (модерен \"Q\" модел)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Enable CD Boot?"
-msgstr "Стартиране от CD ?"
+msgid "Lilo message not found"
+msgstr "Lilo съобщение не е намерено"
 
-#: ../../any.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Изчакване за стартиране на ядрото"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
+msgstr ""
+"Автоматично регенериране на header-ите на адрото, в /boot за\n"
+"/usr/include/linux/{autoconf,version}.h"
 
-#: ../../any.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Open Firmware Delay"
-msgstr "Изчакване на Open Firmware"
+msgid "if needed"
+msgstr "ако е нужно"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Boot device"
-msgstr "Стартиращо устройство"
+msgid "Restore Failed..."
+msgstr "Възстановяването пропадна..."
 
-#: ../../any.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Init Message"
-msgstr "Стартово съобщение"
+msgid "/Autodetect _jazz drives"
+msgstr "/Автоматично открива _jazz устройства"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bootloader to use"
-msgstr "Използвана зареждащата програма"
+msgid ""
+"Description:\n"
+"\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
+"\n"
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
+"\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
+"\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
+"\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
+"\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid "Bootloader main options"
-msgstr "Опции на зареждащата програма"
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and  \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License,  you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of  the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of  "
+"downloading software components \n"
+"from one of Mandrake Linux sites  which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities.  Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A.  \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A.  \n"
+msgstr ""
+"Въведетние\n"
+"\n"
+"Операционната система и различните компоненти достъпни в Mandrake Linux "
+"дистрибуцията по-долу ще се\n"
+"наричат \"Софтуерен Продукти\". Софтуерните Продукти включват, но не се "
+"ограничават само до, набора\n"
+"програми, методи, правила и документация отнасяща се до операционната "
+"система и различните\n"
+"компоненти на Mandrake Linux дистрибуцията.\n"
+"\n"
+"\n"
+"1. Лицензионен договор\n"
+"\n"
+"Моля, прочетете внимателно този документ. Този документ е лицензионен "
+"договор между вас и\n"
+"MandrakeSoft S.A., който се отнася до Софтуерния Продукт. Чрез "
+"инсталирането, копирането\n"
+"или използването на Софтуерния Продукт по какъвто и да е начин вие изрично "
+"приемате и\n"
+"напълно се съгласявате да спазвате сроковете и условията на този Лиценз.\n"
+"Ако не се съгласявате с някоя част на Лиценза, нямате право да инсталирате, "
+"копирате или\n"
+"използвате Софтуерния Продукт. Опитите да се инсталира, копира или използва "
+"Софтуерния Продукт\n"
+"несъобразно със сроковете и условията на този Лиценз се забраняват и такива "
+"прекратяват правата\n"
+"ви по този Лиценз. При прекратяване на Лиценза, трябва незабавно да "
+"унижтожите всички\n"
+"копия на Софтуерния лиценз.\n"
+"\n"
+"\n"
+"2. Ограничена гаранция\n"
+"\n"
+"Софтуерните Продукти и приложената документация се предоставята \"такива "
+"каквито са\", без гаранция,\n"
+"в рамките на разрешеното от закона.\n"
+"MandrakeSoft S.A., при никакви обстоятелства и в рамките на закона, не е "
+"отговорна за каквито да e\n"
+"умишлени, случайни, преки или коствени щети (включително загуба на данни за "
+"работа, прекратяване на,\n"
+"работа, финансови загуби, законни данъци и наказания в резултат на съдебно "
+"решение или каквато и да е\n"
+"друга произлизащи от това загуби) произтичащи от употребата или от "
+"невъзможността да се употреби\n"
+"Софтуерния Продукт, даже ако MandrakeSoft S.A. да е известила за "
+"възможността или случването на такава загуба.\n"
+"\n"
+"ОГРАНИЧЕНА ОТГОВОРНОСТ СВЪРЗАНА С ПРИТЕЖАВАНЕТО ИЛИ ИЗПОЛЗВАНЕТО НА ЗАБРАНЕН "
+"СОФТУЕР В НЯКОИ СТРАНИ\n"
+"\n"
+"В рамките на закона, MandrakeSoft S.A. и нейните дистрибутори няма при "
+"никакви условия да бъдат\n"
+"отговорни за каквито и да било умишлени, случайни, преки или косвени щети "
+"(включително загуба на данни\n"
+"за работа, прекратяване на, работа, финансови загуби, законни данъци и "
+"наказания в резултат на\n"
+"съдебно решение или каквато и да е друга произлизащи от това загуби) "
+"произтичащи от притежаването\n"
+"и употребата на софтуерни компоненти и от изтеглянето на софтуерни "
+"компоненти от сайтовете на Mandrake Linux,\n"
+"които са забранени в някои страни от местното законодателство.\n"
+"Тази ограничена отговорност се отнася до, но не само за, мощните "
+"криптографски компоненти включени\n"
+"в Софтуерния Продукт.\n"
+"\n"
+"\n"
+"3. GPL Лиценза и придружаващи лицензи\n"
+"\n"
+"Софтуерният Продукт се състои от компоненти създадени от различни хора или "
+"организации. Повечето от\n"
+"тези компоненти се управляват от сроковете и условията на GNU Общия Публичен "
+"Лиценз, оттук нататък наричан\n"
+"\"GPL\", или подобни нему лицензи. Повечето от тези лицензи ви позволяват да "
+"използвате, копирате, или\n"
+"редистрибутирате компонентите, които те покриват. Моля, прочетете внимателно "
+"сроковете и условията на\n"
+"лицензионния договор на всеки компонент преди да го използвате. Всякакви "
+"въпроси относно лиценза\n"
+"на компонентите би трябвало да бъдат насочени към съответния им автор, а не "
+"към MandrakeSoft.\n"
+"Програмите разработени от MandrakeSoft S.A. се управляват от GPL Лиценза. "
+"Документацията написана\n"
+"от MandrakeSoft S.A. се управлява от специален лиценз. Моля, погледнете "
+"документацията за\n"
+"повече информация.\n"
+"\n"
+"\n"
+"4. Права за Интелектуална Собственост\n"
+"\n"
+"Всички права към компонентите на Софтуерния Продукт принадлежат на "
+"съответните им автори и са\n"
+"защитени от законите за интелектуалната собственост и за копиране прилагани "
+"за софтуерните програми.\n"
+"MandrakeSoft S.A. запазва правото си да модифицира и пригодява Софтуерния "
+"Продукт, като цяло или на\n"
+"части, по всякакъв начим о с всякакви цели.\n"
+"\"Mandrake\", \"Mandrake Linux\" и свързаните логота са запазена марка на "
+"MandrakeSoft S.A.\n"
+"\n"
+"\n"
+"5. Управляващи Закони\n"
+"\n"
+"Ако някоя част от този договор се води забранена, нелегална или неприложима "
+"според решение на съд,\n"
+"тази част се изключва от договора. Вие оставате ограничени от останалите "
+"приложими секции на договора.\n"
+"Сроковете и условията на този Лиценз се управляват от Законите на Франция.\n"
+"Всички спорове по условията на този лицез би било добре да се отнесат до "
+"съда. Като крайна мярка,\n"
+"споровете ще бъдат отнасяни до подходящия правни съдилища на Париж - "
+"Франция.\n"
+"За всякакви въпроси по този документ, моля, свържете се с MandrakeSoft S.A.\n"
+"\n"
+"ЗАБЕЛЕЖКА: Това е български приблизителен превод на документа, което "
+"означава, че той\n"
+"вероятно не е достатъчно точен. Като по-достоверен източник ползвайте "
+"неговия оригинал на\n"
+"английски.\n"
 
-#: ../../any.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "Опцията ``Ограничи опциите от командния ред'' е безполезна без парола"
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
+"лентата за прогрес x координати\n"
+"от горният ляв ъгъл"
 
-#: ../../any.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Give the ram size in MB"
-msgstr "Дава размера RAM-памет в Mb"
+msgid "Current interface configuration"
+msgstr "Конфигурация на текущият интерфейс"
 
-#: ../../any.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Enable multiple profiles"
-msgstr "Включва много профили"
+msgid "LPD - Line Printer Daemon"
+msgstr "LPD - Линеен Принтерен Демон"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "Точен размер на RAM-паметта, ако е необходимо (намерени %d MB)"
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
+msgstr ""
+"\n"
+"Ако имате ISA карта, стойностите на следващия екран трябва да са верни.\n"
+"\n"
+"Ако имате PCMCIA карта, ще трябва да знаете IRC и IO на картата си.\n"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Clean /tmp at each boot"
-msgstr "Почистване на /tmp при всяко зареждане"
+msgid "Do not print any test page"
+msgstr "Не печати никаква тестова страница"
 
-#: ../../any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Create a bootdisk"
-msgstr "Създаване на boot-дискета"
+msgid "Gurmukhi"
+msgstr "Гурмукчи"
 
 #: ../../any.pm:1
 #, c-format
-msgid "restrict"
-msgstr "ограничи"
+msgid "Force No APIC"
+msgstr "Без APIC"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restrict command line options"
-msgstr "Ограничи опциите, задавани от командния ред"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "Паролата е прекалено проста (трябва да бъде дълга поне %d символа)"
 
-#: ../../any.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "[keyboard]"
+msgstr "[клавиатура]"
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid "FTP proxy"
+msgstr "FTP proxy"
+
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Стартиране от CD ?"
+msgid "Install List"
+msgstr "Инсталиране на системата"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Delay before booting default image"
-msgstr "Забавяне преди стартирането на подразбиращият образ"
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr ""
+"Промяна\n"
+"пътя на възстановяване"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "compact"
-msgstr "компактен"
+msgid "Show only for the selected day"
+msgstr "Показва само за избраният ден"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Compact"
-msgstr "Компактен"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Bootloader installation"
-msgstr "Инсталация на Bootloader"
+msgid "512 kB"
+msgstr "512 КБ"
 
-#: ../../any.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "First sector of boot partition"
-msgstr "Първи сектор от стартиращия се дял"
+msgid "Logs"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "First sector of drive (MBR)"
-msgstr "Първият сектор от драйва (MBR)"
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "Къде искате да инсталирате bootloader-а?"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../any.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "LILO/grub Installation"
-msgstr "LILO/grub инсталация"
+msgid "What kind of card do you have?"
+msgstr "Какъв тип карта имате ?"
 
-#: ../../any.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "SILO Installation"
-msgstr "SILO инсталация"
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "Skip"
-msgstr "Прескача"
+msgid "Security"
+msgstr "Сигурност"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "On Floppy"
-msgstr "Запазва на дискета"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "Първи сектор от стартиращия се дял"
+msgid "Unknown"
+msgstr "Неизвестен модел"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "Network Configuration"
+msgstr "Настройка на мрежата"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "<control>S"
+msgstr "<control>S"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
 msgstr ""
+"Протокол за останалия свят\n"
+" без D-Канал (наета линия)"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Creating bootdisk..."
-msgstr "Създаване на стартираща дискета..."
+msgid "Option %s must be a number!"
+msgstr "Настройката %s трябва да е число !"
 
-#: ../../any.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Insert a floppy in %s"
-msgstr "Сложете дискета в устройство %s"
+msgid "Notice"
+msgstr "Бележка"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "Изберете флопи устройство, където да направите стартираща дискета"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+" Активира/Забранява ежедневна проверка за защита"
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Second floppy drive"
-msgstr "Второ флопи устройство"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "First floppy drive"
-msgstr "Първо флопи устройство"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr "Вие не сте конфигурирали X. Сигурни ли сте, че искате това?"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "Съжалявам няма флопи"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
+"Конфигурацията на принтера ще работи нашълно автоматично. Ако вашият принтер "
+"не е бил коректно открит или вие предпочитате на настроите принтера, "
+"включете на \"Ръчна конфигурация\"."
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "What type of partitioning?"
+msgstr "Какъв тип разделяне на дялове ?"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
+"file list sent by FTP: %s\n"
+" "
 msgstr ""
-"Клиентски bootdisk е необходим за стартиране в Linux системата ви "
-"независимо\n"
-"от обикновената зареждаща програма. Това е полезно, ако не искате да "
-"инсталирате\n"
-"LILO (или GRUB) на системата си или ако някоя друга операционна система "
-"махне LILO или LILO не\n"
-"работи с хардуерната ви настройка. Bootdisk-ът може да бъде използван със\n"
-"спасителната дискета на Mandrake, улесняваща възстановяването при редки\n"
-"случаи на срив. Искате ли да създам bootdisk за системата ви ?\n"
-"%s"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Interface"
+msgstr "Интерфейс"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Options Description:\n"
 "\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
 "\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
-msgstr ""
+" - Backup User Files: \n"
 "\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
 "\n"
-"(ПРЕДУПРЕЖДЕНИЕ! Вие използвате XFS за вашата коренова файлова система,\n"
-"създаването на bootdisk върху 1.44 Мб флопи няма да е успешно,\n"
-"понеже XFS се нуждае от много повече място)."
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"Клиентскят bootdisk е необходим за стартиране в Linux системата ви "
-"независимо\n"
-"от обикновения bootloader. Това е полезно, ако не искате да инсталирате\n"
-"SILO на системата си, ако някоя друга операционна система махне SILO\n"
-"или ако SILO не работи с хардуерната ви настройка. Клиентският bootdisk\n"
-"може да бъде използван със\n"
-"спасителният образ на Mandrake, улесняваки възстановяването при редки\n"
-"случаи на срив.\n"
-"\n"
-"Ако искате да създадете bootdisk за вашата система, поставете дискета в\n"
-"първото устройство и натиснете \"Ok\"."
 
-#: ../../bootloader.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "Не можете да инсталирате bootloader на дяла %s\n"
+msgid "comma separated strings"
+msgstr "низове разделени със запетая"
 
-#: ../../bootloader.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "not enough room in /boot"
-msgstr "няма достатъчно място за /boot"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "Подсветнатият запис ще зареди автоматично след %d секунди."
+msgid "Messages"
+msgstr "Съобщения"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "командите преди стартиране, или 'c' за команден ред."
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr "Неизвестен|CPH06X (bt878) [много производители]"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "Натиснете 'enter' за да стартирате избраната ОС, 'e' да редактирате"
+msgid "POP and IMAP Server"
+msgstr "POP и IMAP сървър"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr ""
-"Използва клавишите %c и %c  за избор на това кой запис да бъде подсветнат."
+msgid "Mexico"
+msgstr "Мексико"
 
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "Добре дошли в GRUB ,за избор на операционната система!"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "Форматиране"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
+msgid "Rwanda"
+msgstr "Руанда"
 
-#: ../../bootloader.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Grub"
-msgstr "Grub"
+msgid "Do you have any %s interfaces?"
+msgstr "Имате ли някакъв %s интерфейс?"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with text menu"
-msgstr "LILO с текстово меню"
+msgid "Switzerland"
+msgstr "Швейцария"
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO с графично меню"
+msgid "Brunei Darussalam"
+msgstr "Бруней"
 
-#: ../../bootloader.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Remote lpd Printer Options"
+msgstr "Опции на отдалечен lpd-принтер"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
 "\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
-"Добре дошли в %s - избиране на операционна система!\n"
+"GNU/Linux е многопотребителска система, която означава, че всеки потребител "
+"може\n"
+"да има свои предпочетания, файлове и т.н.. можете да прочетете Ръковоството "
+"на\n"
+"Потребителя, за да научите повече.\n"
+"За разлика от Root, който е администраторът, потребителите, които ще "
+"добавите тук\n"
+"няма да могат да променят нищо освен собствените си файлове и техните "
+"настройки.\n"
+"Ще трябва да създадете поне един обикновен потребител за себе си.\n"
+"С този акаунт ще трябва да влизате за рутинна дейност. Въпреки това "
+"практиката\n"
+"да влизате като root ежедневно, може да бъде много опасна ! И най-"
+"малкатагрешка\n"
+"може да означава, че системата ви няма да работи повече. Ако направите някоя "
+"сериозна\n"
+"грешка като потребител, това може са да доведе до загуба на част от "
+"информацията,\n"
+"но не и на цялата система.\n"
 "\n"
-"Изберете операционната система от горният списък или изчакайте\n"
-"%d секунди за подразбиращо стартиране.\n"
+"Първо, трябва да си въведете името. Това не е задължително, разбира се, "
+"всъщност\n"
+"можете да въведете каквото и да е. DrakX след това ще избере първата "
+"въведена\n"
+"в кутийката дума и ще го изкара като потребителско име. Това е името, с "
+"което\n"
+"всъщност определеният потребител ще влиза в системата. Можете да го "
+"промените.\n"
+"Трябва да въведете и парола тук. Паролата на непревилегирован (обикновен) "
+"потребител\n"
+"не е толкова фатална като тази на Root от гледна точка на сигурността, но "
+"все\n"
+"пак няма причина да я подценявата, тъй като рискувате файловете си.\n"
 "\n"
+"След като цъкнете на \"Приеми потребител\", можете да добавите колкото си "
+"искате.\n"
+"Добавете по един потребител за всеки от приятелите си: баща си, сестра си, "
+"например.\n"
+"Когато сте добавили всички потребители, които искате, цъкнете Готово.\n"
+"\n"
+"Цъкнете на бутона \"Напредничав\", за да промените обвивката по подразбиране "
+"на\n"
+"потребителя (bash по подразбиране)."
 
-#: ../../common.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "consolehelper missing"
-msgstr "липсва помощ на конзола"
+msgid "Configure Internet Access..."
+msgstr "Настройка на Интернет достъпа ..."
 
-#: ../../common.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "kdesu missing"
-msgstr "липсва kdesu"
+msgid "Norway"
+msgstr "Норвегия"
 
-#: ../../common.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "Снимки ще бъдат налични след инсталиране в %s"
+msgid "Danish"
+msgstr "Датска"
 
-#: ../../common.pm:1
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
+"Автоматично включване на numlock клавиша под конзола и\n"
+"XFree при стартитане."
+
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
+msgstr ""
+"Моля, въведете IP настройките за тази машина.\n"
+"Всяко устройство трябва да бъде въведено като IP адрес\n"
+"с точково-десетично означение (например, 1.2.3.4)."
+
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "Не мога да добавя повече дялове"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
+"Инсталацията на Mandrake Linux е разположена на няколко CDROM-а. DrakX\n"
+"знае дали избран пакет не се намира на друг CDROM или ще извади текущото\n"
+"CD и ще ви остави да вкарате това, от което има нужда."
 
-#: ../../common.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "%d seconds"
-msgstr "%d секунди"
+msgid "Processors"
+msgstr "Процесори"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "1 minute"
-msgstr "1 минута"
+msgid "Bulgaria"
+msgstr "България"
 
-#: ../../common.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "%d minutes"
-msgstr "%d минути"
+msgid "No NIC selected!"
+msgstr "Няма NIC избран!"
 
-#: ../../common.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "TB"
-msgstr "ТБ"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr "Свалбард и Ян Майен Острови"
 
-#: ../../common.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "GB"
-msgstr "ГБ"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
+msgstr ""
+"Появи се проблем при конфигурацията.\n"
+"Проверете вашата връзка през net_monitor или mcc. Ако вашата връзка не "
+"работи , вие трябва да преконфигурирате."
 
-#: ../../common.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "MB"
-msgstr "МБ"
+msgid "partition %s is now known as %s"
+msgstr "дял %s сега е известен като %s"
 
-#: ../../common.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "KB"
-msgstr "КБ"
+msgid "Backup Other files..."
+msgstr "Резервно копие на други файлове..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "United States"
-msgstr "САЩ"
+msgid "SMB server IP"
+msgstr "IP на SMB сървър:"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Austria"
-msgstr "Австрия"
+msgid "Congo (Kinshasa)"
+msgstr "Конго (Киншаса)"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Italy"
-msgstr "Италия"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "Таблицата на дяловете на устройство %s ще бъде записана върху диска !"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Netherlands"
-msgstr "Холандия"
+msgid "Installing HPOJ package..."
+msgstr "Инсталиране на HPOJ пакети ..."
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sweden"
-msgstr "Швеция"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
+msgstr ""
+"Клиентски bootdisk е необходим за стартиране в Linux системата ви "
+"независимо\n"
+"от обикновената зареждаща програма. Това е полезно, ако не искате да "
+"инсталирате\n"
+"LILO (или GRUB) на системата си или ако някоя друга операционна система "
+"махне LILO или LILO не\n"
+"работи с хардуерната ви настройка. Bootdisk-ът може да бъде използван със\n"
+"спасителната дискета на Mandrake, улесняваща възстановяването при редки\n"
+"случаи на срив. Искате ли да създам bootdisk за системата ви ?\n"
+"%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Norway"
-msgstr "Норвегия"
+msgid ", USB printer \\#%s"
+msgstr ", USB принтер \\#%s"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Greece"
-msgstr "Гърция"
+msgid "Latvian"
+msgstr "Латвийска"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Germany"
-msgstr "Германия"
+msgid "monthly"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Czech Republic"
-msgstr "Чешка Република"
+msgid "Module name"
+msgstr "Име на модул"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Belgium"
-msgstr "Белгия"
+msgid "Start at boot"
+msgstr "Изпълнение при стартиране"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "France"
-msgstr "Франция"
+msgid "Use Incremental Backups"
+msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Costa Rica"
-msgstr "Коста Рика"
+msgid "First sector of drive (MBR)"
+msgstr "Първият сектор от драйва (MBR)"
 
-#: ../../fsedit.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "Грешка при отваряне на %s за запис: %s"
+msgid "Joystick"
+msgstr "Джойстик"
 
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Nothing to do"
-msgstr "Няма нищо за правене"
+msgid "El Salvador"
+msgstr "Ел Салвадор"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "Няма достатъчно място за автоматично разпределяне"
+msgid "Use Unicode by default"
+msgstr "Използва уникод по подразбиране"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You can't use an encrypted file system for mount point %s"
+msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr ""
-"Вие не може да използвате криптирана файлова система за точка на монтиране %s"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "Опитвам се да спася таблицата на дяловете"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr "Настройката %s трябва да е цяло число !"
+
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
+"Entries you'll have to fill:\n"
+"%s"
 msgstr ""
-"Нуждаете се от истинска файлова система (ext2, reiserfs,xfs, или jfs) за "
-"тази точка на монтиране\n"
+"Записите които вие ще трябва да запълните:\n"
+"%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "Тази директория трябва да остане в рамките на root файловата система."
+msgid "Unable to start live upgrade !!!\n"
+msgstr "Не мога да пусна обновяването !!!\n"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "Не можете да използвате LVM тип за място на монтиране %s"
+msgid "Name: "
+msgstr "Име: "
 
-#: ../../fsedit.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"Маркирали сте софтуерен RAID дял като root (/).\n"
-"Няма зареждаща програма, която да може да се справи с него без /boot дял.\n"
-"Така че добавете /boot дял"
+msgid "16 million colors (24 bits)"
+msgstr "16 милиона цвята (24 бита)"
 
-#: ../../fsedit.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "Вече има дял монтиран на това място %s\n"
+msgid "Allow all users"
+msgstr "Позволява на потребители"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr "Името на принтера трябва да съдържа само букви, числа и подчертавка"
+#: ../../share/advertising/08-store.pl:1
+#, c-format
+msgid "The official MandrakeSoft Store"
+msgstr "Официалният източник на MandrakeSoft "
 
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "Точките на монтиране трябва да започват с /"
+msgid "Resizing"
+msgstr "Промяна на големината"
 
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "Не можете да инсталиране ReiserFS на дял по-малък от 32 МБ"
+msgid "Cable connection"
+msgstr "Кабелна връзка"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "Не можете да използвате JFS за дял по-малък от 16 МБ"
+msgid "User"
+msgstr "Потребител"
 
 #: ../../fsedit.pm:1
 #, c-format
@@ -1031,981 +1706,266 @@ msgstr ""
 "\n"
 "Съгласни ли сте да загубите всички дялове?\n"
 
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error"
-msgstr "Грешка"
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "server"
-msgstr "сървър"
+msgid "Printer on parallel port \\#%s"
+msgstr "Пример на паралелен порт \\#%s"
 
-#: ../../fsedit.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "with /usr"
-msgstr "с /usr"
+msgid "Name"
+msgstr "Име"
 
-#: ../../fsedit.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "simple"
-msgstr "прост"
+msgid "mkraid failed"
+msgstr "mkraid пропадна"
 
-#: ../../fs.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Enabling swap partition %s"
-msgstr "Разрешава swap дял %s"
+msgid "Button 3 Emulation"
+msgstr "Имитация на 3 бутона"
 
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "грешка при демонтиране на %s: %s"
+msgid "Sending files..."
+msgstr "Изпращам файлове..."
 
-#: ../../fs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr "монтирането на дял %s в директория %s пропадна"
+msgid "Israeli (Phonetic)"
+msgstr "Израелска (фонетична)"
 
-#: ../../fs.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mounting partition %s"
-msgstr "Форматира дял %s"
+msgid "access to rpm tools"
+msgstr "достъп до rpm инструменти"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Checking %s"
-msgstr "Проверка на %s"
+msgid "edit"
+msgstr "редактира"
 
-#: ../../fs.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Formatting partition %s"
-msgstr "Форматиране на дял %s"
+msgid "You must choose/enter a printer/device!"
+msgstr "Трябва да въведете/изберете принтер/устройство!"
 
-#: ../../fs.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Creating and formatting file %s"
-msgstr "Създаване и форматиране на файл %s"
+msgid "Permission problem accessing CD."
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "не знам как да форматирам %s в тип %s"
+msgid "Phone number"
+msgstr "Телефонен номер"
 
-#: ../../fs.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s форматиране от %s провалено"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr "Грешка: \"%s\" драйвер за вашата карта е инсталиран"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"Цъкнете \"OK\", ако искате да изтриете всички данни и\n"
-"дялове съществуващи на този твърд диск. Внимание, след цъкане на \"OK\", "
-"нямада можете да възстановите каквито и да било данни и дялове съществуващи "
-"на този твърд диск,\n"
-"включително каквито и да е Windows данни.\n"
-"\n"
-"Цъкнете \"Отмяна\", за да отмените тази операция без загуба да данните и\n"
-"дяловете съществуващи на този твърд диск."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer name, description, location"
+msgstr "Име на принтера, описание, местоположение"
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
+msgid "USA (broadcast)"
 msgstr ""
-"Изберете твърдия диск, който искате да изтрете, за да\n"
-"инсталирам новия ви Mandrake Linux дял. Внимание, всички данни на него ще "
-"бъдат загубени\n"
-"и няма да могат да се възстановят."
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+"Please choose the\n"
+"media for backup."
 msgstr ""
+"Моля, изберете\n"
+"носител за резервно копие."
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "Use Xinerama extension"
+msgstr "Използвай разширението Xinerama"
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
 msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
 msgstr ""
+"Неможе да се затвори правилно mkbootdisk: \n"
+" %s \n"
+" %s"
 
-#: ../../help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
+msgid "West Europe"
+msgstr "Западна Европа"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
+"[OPTIONS] [PROGRAM_NAME]\n"
 "\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
+msgid "Harddrake2 version %s"
+msgstr "Harddrake2 версия %s"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-"LILO (или LInux LOader) и Grub са bootloader-и: те мога да стартират\n"
-"GNU/Linux или коя да е друга операционна система съществуваща на компютъра "
-"ви.\n"
-"Обикновенно, тези други операционни система се засичат и инсталират\n"
-"правилно. Ако това не става при вас, можете да добавяте записи на ръка в\n"
-"този екран. Гледайте да изберете верни параметри.\n"
-"\n"
-"\n"
-"Може да не искате да давате достъп до тези операционни системи на никой,\n"
-"в който случай можете да изтриете съответните записи. Но в такъв случай,\n"
-"ще се нуждаете от boot-дискета, за да ги стартирате !"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Copying %s"
+msgstr "Копиране на %s"
 
-#: ../../help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
+msgid "Choose color"
+msgstr "Изберор на цвят"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
+msgid "Dominican Republic"
+msgstr "Доминиканска Република"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
-"Моля, изберете верния порт. Например, портът COM1 под Windows под GNU/Linux\n"
-"се нарича ttyS0."
+msgid "Swaziland"
+msgstr "Свазиленд"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
-"По подразбиране, DrakX предполага че имате двубутонна мишка и ще включи\n"
-"симулиране на три бутона. DrakX автоматично разбира дали е PS/2, серийна "
-"или\n"
-"USB мишка.\n"
-"\n"
-"Ако искате да определите друг тип на мишката, изберете подходящ от списъка,\n"
-"който ще ви бъде представен.\n"
-"\n"
-"Ако изберете мишка различна от тази по подразбиране, ще ви бъде предоставен\n"
-"екран за проба. Използвайте бутоните и колелцето, за да проверите, че\n"
-"настройката е дора. Ако мишката не работи, както трябва, натиснете интервал\n"
-"или СЕ ВЪРНЕТЕ към \"Отказ\" и изберете пак."
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Set-UID"
+msgstr "Задава-UID"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
-msgstr ""
-"Моля, цъкнете на предпочитания език на инсталация и системна употреба.\n"
-"\n"
-"Цъкането на бутона \"Напредничав\" ще ви позволи да изберете други езици\n"
-"да бъдат инсталирани на работната ви станция. Избирането на други езици\n"
-"ще инсталира файлове специвични за езиците за системна документация и\n"
-"приложения. Например, ако имате потребители от Изпания на машината си,\n"
-"изберете английски като главен език в дървовидната форма и в секция\n"
-"\"Напредничав\" цъкнете на сивата звезда съответстваща на\n"
-"\"Испански|Испания\".\n"
-"Отбележете, че могат да бъдат инсталирани няколко езика. Веднъж избран\n"
-"някакъв локал, цъкнете бутона \"OK\", за да продължите."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Please check if you are using CDRW media"
+msgstr "Моля, проверете дали използвате CDRW медия"
 
 #: ../../help.pm:1
-#, fuzzy, c-format
+#, c-format
 msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
 msgstr ""
-"Обикновено, DrakX би трябвало да избере правилната за вас клавиатура (в "
-"зависимост\n"
-"от езика, който сте избрали) и няма да се наложи да видите тази стъпка. "
-"Обаче може да\n"
-"нямате клавиатура съответстваща точно на вашия език: например, ако сте "
-"англоговорящ швед,\n"
-"може би ще искате клавиатурата ви да бъде шведска. Или ако говорите "
-"aнглийски, но сте\n"
-"в Квебек, може би ще сте в същата ситуация. И в двата случая, ще трябва да "
-"се върнете\n"
-"към тази инсталационна стъпка и да изберете правилната клавиатура от "
-"списъка.\n"
-"\n"
-"Всичко, което трябва да направите, е да посочите предпочитаната клавиатурна "
-"наредба\n"
-"от списъка, който ще се появи пред вас.\n"
-"\n"
-"Ако имате клавиатура от език различен от този използван по подразбиране, "
-"цъкнете\n"
-"на бутона \"Напредничав\". Ще ви бъде предоставен пълен списък с "
-"поддържаните клавиатури."
+"Изберете твърдия диск, който искате да изтриете, за да\n"
+"инсталирам новия ви Mandrake Linux дял. Внимание, всички данни на него ще "
+"бъдат загубени\n"
+"и няма да могат да се възстановят."
 
-#: ../../help.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid " on parallel port \\#%s"
+msgstr " на паралелен порт \\#%s"
 
-#: ../../help.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
 msgstr ""
+"Използва клавишите %c и %c  за избор на това кой запис да бъде подсветнат."
 
-#: ../../help.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
-msgstr ""
-"Беше засечен повече от един Microsoft Windows дял\n"
-"на твърдия ви диска. Изберете този, чиято дължина искате да промените, за "
-"да\n"
-"инсталирате Mandrake Linux операционна система.\n"
-"\n"
-"\n"
-"За информация, всеки дял е изброен както следва: \"Linux име\", \"Windows име"
-"\", \"Капацитет\".\n"
-"\n"
-"\"Linux името\" се кодира както следва: \"тип на диска\", \"номер на диска"
-"\",\n"
-"\"номер на дял\" (например, \"hda1\").\n"
-"\n"
-"\n"
-"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
-"е\n"
-"SCSI твърд диск.\n"
-"\n"
-"\n"
-"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
-"дискове:\n"
-"\n"
-"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
-"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
-"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
-"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
-"\n"
-"\n"
-"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
-"\"втори твърд диск\" и т.н..\n"
-"\n"
-"\"Windows името\" е буквата на твърдия ви диск под Windows (първият диск "
-"или\n"
-"дял се нарича \"C:\")."
+msgid "Generic 2 Button Mouse"
+msgstr "Обикновенна 2-бутонна мишка"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
-msgstr ""
-"В този момент трябва да изберете кой дялове да бъдат използвани за "
-"инсталация\n"
-"на вашата Mandrake Linux система. Ако дяловете вече са определени, дали от\n"
-"предишна инсталация на GNU/Linux или от друг инструмент за разделяне, "
-"можете\n"
-"да използвате съществуващите далове. В противен случай трябва да определите\n"
-"дялове от твърдия диск.\n"
-"\n"
-"За да създадете дялове, трябва първо да изберете твърд диск. Можете да\n"
-"изберете диск за разделяне, като цъкнете на \"hda\" за първо IDE "
-"устройство,\n"
-"\"hdb\" за второто, \"sda\" за първо SCSI устройство и т.н..\n"
-"\n"
-"За да разделите избрания твър диск, можете да използвате следния опции:\n"
-"\n"
-" * \"Изчисти всичко\": тази опция изтрива всички дялове на избрания диск.\n"
-"\n"
-" * \"Автоматично създаване\": тази опция позволява автоматично да съзадете\n"
-"Ext2 и swap дялове в свободното пространство на твърдия ви диск.\n"
-"\n"
-" * \"Спаси таблицата с дялове\": ако таблицата с дялове е повредена, можете\n"
-"да се опитате да я възстановите с тази опция. Моля, бъдете внимателни и\n"
-"помнете, че може да не стане.\n"
-"\n"
-" * \"Върни\": използвайте тази опция, за да отмените промените.\n"
-"\n"
-" * \"Презареди\": можете да използвате тази опция, ако искате да върнете\n"
-"всички промени и да заредите първоначалната таблица с дялове.\n"
-"\n"
-" * \"Магьосник\": използвайте тази опция, ако искате да използвате "
-"магьосник,\n"
-"да раздели твърдия ви диск. Това се препоръчва, ако нямате достатъчно "
-"познания\n"
-"за разделянето.\n"
-"\n"
-" * \"Възстанови от дискета\": тази опция ще ви позволи да възстановите "
-"запазена\n"
-"преди това на дискета таблица с дялове.\n"
-"\n"
-" * \"Запази на дискета\": запазва таблицата с дялове на дискета. Полезно е "
-"при\n"
-"евентуално възстановяване на таблицата при необходимост. Силно се "
-"препоръчва\n"
-"да направите това.\n"
-"\n"
-" * \"Готово\": когато сте свършили с разделянето на твърдия си диск, това "
-"ще\n"
-"запише промените върху диска.\n"
-"\n"
-"Забележета: можете да достигнете всяка опция използвайки клавиатурата.\n"
-"Минавайте през дяловете използвайки [Tab} и стрелките нагоре/надолу.\n"
-"\n"
-"Когато е избран дял, можете да използвате:\n"
-"\n"
-" * Ctrl-c, за да създадете нов дял (ако е избран празен дял);\n"
-"\n"
-" * Ctrl-d, за да изтриете дял;\n"
-"\n"
-" * Ctrl-m, за да установите точка на монтиране.\n"
-"\n"
-"Ако инсталите на PPC машина, сигурно ще искате да създадете малък HFS\n"
-"\"bootstrap\" дял от поне 1 МБ, който ще бъде използват от boot loader-ът\n"
-"yaboot. Ако смятате да направите дяла по-голям, например 50 МБ, можете да "
-"го\n"
-"намерите за полезно място, където да съхранявате някое ядро или image на\n"
-"ramdisk в случай на извънредни ситуации."
+#: ../../lvm.pm:1
+#, c-format
+msgid "Remove the logical volumes first\n"
+msgstr "Първо премахни логичните дялово\n"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
-"В този момент, трябва да изберете нивото на сигурност, което искате за\n"
-"машината. По правило, колкото повече машината ви е достъпна и колкото "
-"повече\n"
-"данни се съхраняват на нея, толкова по-високо трябва да е нивото на "
-"сигурност.\n"
-"Въпреки това, високата сигурност е за сметка на лекотата на работа.\n"
-"Обърнете се към главата MSEC на Reference Manual, за да получите повече "
-"информация\n"
-"за значението на тези нива.\n"
-"\n"
-"Ако не знаете както да изберете, изберете опцията по подразбиране."
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "Подсветнатият запис ще зареди автоматично след %d секунди."
 
-#: ../../help.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
+"Не мога да пиша в /etc/sysconfig/bootsplash\n"
+"Файла не е намерен."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Internet access"
+msgstr "Интернет достъп"
+
+#: ../../standalone/draksplash:1
+#, c-format
 msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Всички новодефинирани дялове трябва да бъдат форматирани, за да се "
-"използват\n"
-"(форматиране означава създаване на файлова система).\n"
-"\n"
-"В този момента може би искате да преформатирате някои съществуващи дялове, "
-"за\n"
-"да изтриете всякакви данни, които съдържат. Ако искате да го направите, "
-"моля\n"
-"изберете тях.\n"
-"\n"
-"Моля, отбележете, че не е необходимо да преформатирате всички дялове\n"
-"съществуващи отпреди. Трябва да преформатирате дяловете съдържащи\n"
-"операционната система (като \"/\", \"/usr\" или \"/var\"), но това не е\n"
-"задължително за дялове съдържащи данни, които искате да запазите "
-"(обикновено\n"
-"\"/home\").\n"
-"\n"
-"Моля, бъдете внимателни, когато избирате дяловете. След форматиране всички\n"
-"данни на посочените дялове ще бъдат изтрити и няма да можете да ги\n"
-"възстановите.\n"
-"\n"
-"Цъкнете \"OK\", когато сте готови да форматирате далове.\n"
-"\n"
-"Цъкнете \"Отказ\", ако искате да изберете други дялове за инсталация на "
-"новата\n"
-"си Mandrake Linux операционна система.\n"
-"\n"
-"Цъкнете \"Напредничав\", ако искате да изберете дялове, които да бъдат\n"
-"проверени за лоши блокове от диска."
+"y координати на текстовата рамка\n"
+"в брой символи"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
-"А така ! Инсталацията е завършена и GNU/Linux системата ви е готова за\n"
-"употреба. Просто цъкнете \"OK\", за да рестартирате системата. Можете да\n"
-"стартирате GNU/Linux или Windows, което предпочитате (ако имате две "
-"системи),\n"
-"веднага след като компютърът стартира отново.\n"
-"\n"
-"Бутона \"Напредничав\" (само в \"Експертен\") показва още два бутона за:\n"
-"\n"
-" * \"генериране на дискета за автоматична инсталация\": за да създадете\n"
-"инсталационна дискета, която след това автоматично да изчършва цялата\n"
-"инсталация без помощта на оператор, приличаща на инсталацията, която току-"
-"що\n"
-"сте извършили.\n"
-"\n"
-"   Отбележете, че две различни опции са достъни, чрез цъкане на бутона:\n"
-"\n"
-"    * \"Преиграй\". Това е частично автоматизирана инсталация като стъпките\n"
-"по разделяне на дялове остават интерактивни.\n"
-"\n"
-"    * \"Автоматична\". Напълно автоматична инсталация: твърдият диск се\n"
-"презаписва напълно, всякакви данни се загубват.\n"
-"\n"
-"   Тази особеност е много удобна, когато инсталирате голям брой подобно\n"
-"машини. Вижте секцията за автоматична инсталация на нашия web-сайт.\n"
-"\n"
-"    * \"Запази избора на пакети\"(*): запазва избора на пакети, така както "
-"е\n"
-"направен преди. Когато правите друга инсталация, вкарайте дискетата в\n"
-"устройството и пуснете инсталацията да върви чрез помощния екран, като\n"
-"натиснете клавиша [F1] и като напишете >>linux defcfg=\"floppy\"<<.\n"
-"\n"
-"(*) Трябва ви FAT-форматирана дискета (за да създадете таква под GNU/Linux,\n"
-"напишете \"mformat a:\")"
+"За да видите списък с достъпните опции за текущия принтер, цъкнете на бутона "
+"\"Списък с опции за печат\"."
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Enabling servers..."
+msgstr "Включване на сървъри ..."
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing test page(s)..."
+msgstr "Отпечатване на тестов(ата/ите) страниц(а/и) ..."
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "There is already a partition with mount point %s\n"
+msgstr "Вече има дял монтиран на това място %s\n"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
@@ -2026,51 +1986,49 @@ msgid ""
 "\n"
 "Depending on your hard drive configuration, several options are available:\n"
 "\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
 "\n"
 "   Before choosing this option, please understand that after this\n"
 "procedure, the size of your Microsoft Windows partition will be smaller\n"
 "then when you started. You will have less free space under Microsoft\n"
 "Windows to store your data or to install new software.\n"
 "\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be deleted. !!\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
 "\n"
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 "В този момент трябва изберете къде на твърдия си диска да инсталирате "
 "вашата\n"
@@ -2148,194 +2106,119 @@ msgstr ""
 "много лесно да загубите всички данни. Така че не избирайте това, ако не\n"
 "знаете какво правите."
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
-msgstr ""
-"Накрая, ще бъдете попитани дали искате да виждате графичния интерфейс при\n"
-"зареждане. Отбележете, че този въпрос ще ви бъде зададен даже ако изберете,\n"
-"да не тествате настройката. Очевидно, бихте отговорили с \"Не\", ако "
-"машината\n"
-"ще работи като сървър или ако няма успешно настроен дисплей."
+msgid "Ukraine"
+msgstr "Украйна"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Application:"
+msgstr "Приложение:"
 
-#: ../../help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
-msgstr ""
+msgid "External ISDN modem"
+msgstr "Външен ISDN модем"
 
-#: ../../help.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "if set to yes, report check result by mail."
+msgstr "ако е задаено да, изпраща по пощата съобщение за резултата."
+
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "Вашият избор ? (по подразбиране е %s)"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid " / Region"
+msgstr "/ Регион"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
+"The classic bug sound tester is to run the following commands:\n"
 "\n"
 "\n"
-"Test\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
 "\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
 "\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
 "\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
 "\n"
-"Options\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
 "\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
 "\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
 msgstr ""
+"Тестовите страници са изпратени към принтера.\n"
+"Може да отнеме малко време преди принтера да започне.\n"
+"Състояние на печата:\n"
+"%s\n"
+"\n"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
+msgid "daily"
 msgstr ""
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
-msgstr ""
-"Сега можете да изберете кои услуги да се пускат при стартиране.\n"
-"\n"
-"Тук са представени всички услуги, достъпни с настоящата инсталация.\n"
-"Прегледайте ги внимателно и изключете тези, които не ви трябват винаги при "
-"стартиране.\n"
-"\n"
-"Можете видите кратък обяснителен текст за услугата, като поставите курора на "
-"мишката си\n"
-"над името на услугата. Ако не сте сигурни, дали услугата е полезна или не, "
-"по-добре\n"
-"е да оставите избора по подразбиране.\n"
-"\n"
-"Внимавайте с тази стъпка, ако смятате да използвате машината си като "
-"сървър:\n"
-"сигурно не бихте искали да пускате услуги, от които не се нуждаете. Моля,\n"
-"запомнете, че някои услуги могат да бъдат опасни, ако са включени на "
-"сървъра.\n"
-"По принцип, избирайте само услугите, от които наистина се нуждаете."
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "and one unknown printer"
+msgstr "и един неизвестен принтер"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Ireland"
+msgstr "Ирландия"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "kernel version"
+msgstr "версия на ядрото"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "         Restore Configuration       "
+msgstr "         Конфигурация за възстановяване       "
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Is this the correct setting?"
+msgstr "Всичко правилно ли е ?"
 
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
 "You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
 "\n"
 "When configuring your network, the available connections options are:\n"
 "traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
@@ -2371,6155 +2254,6311 @@ msgstr ""
 "свършили\n"
 "с настройката на мрежата, цъкнете \"Отказ\"."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
-msgstr ""
-"Накрая, в зависимост от избора ви дали да избирате пакети един по един, ще\n"
-"ви бъде представено дърво съдържащо всички пакети подредени по групи и\n"
-"подргрупи. Докато обхождате дървото, можете да изберете цели групи, "
-"подгрупи\n"
-"или отделни пакети.\n"
-"\n"
-"Когато посочите пакет от дървото, ще се появи описание вдясно. Когато\n"
-"изборът е приключен, цъкнете бутона \"Инсталирай\", който ще пусне процеса\n"
-"на инсталация. В зависимост от скоростта на хардуера ви и броя на пакетите,\n"
-"които искате да бъдат инсталирани, процесът може да отнеме известно време.\n"
-"Очакваното време за приключване на процеса, че бъде показано на екрата, за\n"
-"да ви помогне да прецените дали имате достатъчно време да се насладите на\n"
-"чаша кафе.\n"
-"\n"
-"!! Ако е избран сървърен пакет, било то умишлено или защото е част от цяла\n"
-"група, ще бъдете помолени за потвърждение, че наистина искате този сървър\n"
-"да бъде инсталиран. В Mandrake Linux, всички сървъри тръгват по "
-"подразбиране\n"
-"при зареждане.Даже ако са сигурни и нямат известни проблеми, когато\n"
-"дистрибуцията се разпространява, може да се случи така, че да се появят\n"
-"дупки в сигурността, след като версията на Mandrake Linux е завършена. Ако\n"
-"не знаете за какво служи определена услуга или защо е инсталирана, цъкнете\n"
-"\"Не\". С цъкане на \"Да\"  ще инсталирате изброени услуги и те ще бъдат\n"
-"стартирани автоматично по подразбиране. !!\n"
-"\n"
-"Опцията \"Автоматични зависимости\" изключва предупредителните диалози,\n"
-"когато инсталаторът авоматично реши избере пакет. Това се случва, защото\n"
-"е решил, че се нуждае да задоволи зависимост с друг пакет, за да приключи\n"
-"успешно инсталацията.\n"
-"\n"
-"Малката иконка на дискетка в дъното на списъка позволява да заредите списък\n"
-"с пакети от предишна инсталация. Ако цъкнете на тази иконка, ще бъдете\n"
-"помолени да вкарате дискета създадена преди това в края на друга "
-"инсталация.\n"
-"Вижте втората подсказка по време на последната стъпка, за това как да\n"
-"създадете такава дискета."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Wizard Configuration"
+msgstr "Конфигурация на Магьосник"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
-"Сега е моментът да определите кои програми искате да бъдат инсталирани на\n"
-"системата ви. В Mandrake Linux дистрибуцията има хиляди пакети, но не е\n"
-"задължително да ги знаете наизуст.\n"
-"\n"
-"Ако извършвате стандартна инстлация от CDROM, първо ще бъдете попитани кои\n"
-"CD-та имате (в Експертен режим). Проверете заглавията на CD-тата и посочете\n"
-"кутийките съответстващи на CD-тата, с които разполагате. Цъкнете \"OK\",\n"
-"когато сте готови да продължите.\n"
-"\n"
-"Пакетите са подредени в групи съответстващи на практическата употреба на\n"
-"машината ви. Групите, сами по себе си, са подредени в четири секции:\n"
-"\n"
-" * \"Работна станция\": ако смятате да използвате машината си като работна "
-"станция,\n"
-"изберете една или повече съответните групи.\n"
-"\n"
-" * \"Разработка\": ако машината ви ще бъде използване за програмиране, "
-"изберете\n"
-"желаната(ите) група(и).\n"
-"\n"
-" * \"Сървър\": накрая, ако машината ви ще бъде използвана за сървър, ще\n"
-"можете да изберете кои от най-често използваните услуги искате да имате\n"
-"инсталирани на машината.\n"
-"\n"
-" * \"Графична среда\": тук можете да изберете предпочитаната графична "
-"среда.\n"
-"Поне една трябва да бъде избрана, ако искате да имате графична среда !\n"
-"\n"
-"Премествайки курсора на мишната над името на групата, ще видите кратък\n"
-"обясненителен текст за нея.\n"
-"\n"
-"Можете да цъкнете кутийката \"Индивидуален избор на пакети\", която е "
-"полезна,\n"
-"ако сте запознати с пакетите, които ще ви бъдат предложени или ако искате "
-"да\n"
-"имате пълен контрол над това, което да бъде инсталирано.\n"
-"\n"
-"Ако сте започнали инсталацията в режим на \"Обновяване\", можете да "
-"изключите\n"
-"всички групи, за да избегнете инсталирането на нови пакети. Това е полезно\n"
-"при поправка или обновяване на съществуващата система."
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Autoprobe"
+msgstr "Автоматично засичане"
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Backup system files..."
 msgstr ""
-"Инсталацията на Mandrake Linux е разположена на няколко CDROM-а. DrakX\n"
-"знае дали избран пакет не се намира на друг CDROM или ще извади текущото\n"
-"CD и ще ви остави да вкарате това, от което има нужда."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: ../../install_any.pm:1
+#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr "Не можете да използвате broadcast без NIS домейн"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "Изтриване на принтер \"%s\"..."
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: ../../standalone/drakpxe:1
+#, c-format
 msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"Please indicate where the auto_install.cfg file is located.\n"
 "\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
 "\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
 msgstr ""
-"По-горе са изброени засечените Linux дялове съществуващи\n"
-"на твърдия ви диск. Можете да запазите избора направен от магьосника, те са\n"
-"добри за обща употреба. Ако ги промените, трябва да поне да определите\n"
-"root дял (\"/\"). Не избирайте прекалено малки дялове, защото няма да "
-"можете\n"
-"да инсталирате достатъчно софтуер. Ако искате да съхранявате данните си на\n"
-"отделен дял, трябва да изберете \"/home\" (възможно е само, ако имате "
-"повече\n"
-"от един Linux дял).\n"
-"\n"
-"\n"
-"За информация, всеки дял е показан, както следва: \"Име\", \"Капацитет\".\n"
-"\n"
-"\n"
-"\"Името\" се кодира както следва: \"тип на диска\", \"номер на диска\",\n"
-"\"номер на дял\" (например, \"hda1\").\n"
-"\n"
-"\n"
-"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
-"е\n"
-"SCSI твърд диск.\n"
-"\n"
-"\n"
-"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
-"дискове:\n"
-"\n"
-"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
-"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
-"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
-"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
-"\n"
-"\n"
-"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
-"\"втори твърд диск\" и т.н.."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "information level that can be obtained through the cpuid instruction"
 msgstr ""
-"GNU/Linux е многопотребителска система, която означава, че всеки потребител "
-"може\n"
-"да има свои предпочетания, файлове и т.н.. можете да прочетете Ръковоството "
-"на\n"
-"Потребителя, за да научите повече.\n"
-"За разлика от Root, който е администраторът, потребителите, които ще "
-"добавите тук\n"
-"няма да могат да променят нищо освен собствените си файлове и техните "
-"настройки.\n"
-"Ще трябва да създадете поне един обикновен потребител за себе си.\n"
-"С този акаунт ще трябва да влизате за рутинна дейност. Въпреки това "
-"практиката\n"
-"да влизате като root ежедневно, може да бъде много опасна ! И най-"
-"малкатагрешка\n"
-"може да означава, че системата ви няма да работи повече. Ако направите някоя "
-"сериозна\n"
-"грешка като потребител, това може са да доведе до загуба на част от "
-"информацията,\n"
-"но не и на цялата система.\n"
-"\n"
-"Първо, трябва да си въведете името. Това не е задължително, разбира се, "
-"всъщност\n"
-"можете да въведете каквото и да е. DrakX след това ще избере първата "
-"въведена\n"
-"в кутийката дума и ще го изкара като потребителско име. Това е името, с "
-"което\n"
-"всъщност определеният потребител ще влиза в системата. Можете да го "
-"промените.\n"
-"Трябва да въведете и парола тук. Паролата на непревилегирован (обикновен) "
-"потребител\n"
-"не е толкова фатална като тази на Root от гледна точка на сигурността, но "
-"все\n"
-"пак няма причина да я подценявата, тъй като рискувате файловете си.\n"
-"\n"
-"След като цъкнете на \"Приеми потребител\", можете да добавите колкото си "
-"искате.\n"
-"Добавете по един потребител за всеки от приятелите си: баща си, сестра си, "
-"например.\n"
-"Когато сте добавили всички потребители, които искате, цъкнете Готово.\n"
-"\n"
-"Цъкнете на бутона \"Напредничав\", за да промените обвивката по подразбиране "
-"на\n"
-"потребителя (bash по подразбиране)."
 
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
-"Преди да продължите, трябва внимателно да прочетете условията на лиценза. "
-"Той\n"
-"покрива цялата Mandrake Linux дистрибуция, и, ако не сте съгласни с всички "
-"условия\n"
-"в него, цъкнете на бутона Отказ. Това незабавно ще приключи инсталацията. За "
-"да\n"
-"продължите с инсталацията, цъкнете на бутона Приеми."
+#: ../../lang.pm:1
+#, c-format
+msgid "Peru"
+msgstr "Перу"
 
-#: ../../install2.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "You must also format %s"
-msgstr "Вие трябва също да форматирате %s"
+msgid " on device: %s"
+msgstr " на устройство: %s"
 
-#: ../../install2.pm:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Remove Windows(TM)"
+msgstr "Премахни Windows(TM)"
+
+#: ../../services.pm:1
+#, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "Стартира X Font Server (това е задължително, за да тръгне XFree)."
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
-"Нямам достъп да модулите на ядрото съответстващи на вашият (файл %s липсва), "
-"това означава, че вашето флопи не е синхронизирано с инсталационният носител "
-"(моля направете ново boot флопи)"
+"Повечето от тези стойности са извлечени\n"
+"от вашата работеща система.\n"
+"Вие може да ги промените при необходимост."
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Select the font file or directory and click on 'Add'"
 msgstr ""
-"Появи се грешка - не са открити валидни устройства, върху които да бъдат "
-"създадени нови файлови системи. Моля проверете твърдия си диск си за "
-"причината за този проблем"
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error reading file %s"
-msgstr "Грешка при четенето на файла %s"
+msgid "Madagascar"
+msgstr "Мадагаскар"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid "Urpmi"
 msgstr ""
-"За да използвате запазен избор на пакети, стартирайте инсталацията с ``linux "
-"defcfg=floppy''"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "Тази дискета не е форматирана на FAT"
+msgid "Cron not available yet as non-root"
+msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "Сложете FAT форматирана дискета в устройство %s"
+msgid "System"
+msgstr "Система"
 
-#: ../../install_any.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr "Не можете да използвате broadcast без NIS домейн"
+msgid "Do you want to use this feature?"
+msgstr "Искате ли да използвате тази особеност?"
 
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
 "\n"
-"Do you really want to remove these packages?\n"
+"- Options:\n"
 msgstr ""
-"Следните пакети ще бъдат изтрити за да се позволи обновяване на системата: %"
-"s\n"
-"\n"
 "\n"
-"Действително ли искате да изтриете тези пакети?\n"
+"- Опции:\n"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No"
-msgstr "Не"
+msgid "Password required"
+msgstr "Изисква парола"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../common.pm:1
 #, c-format
-msgid "Yes"
-msgstr "Да"
+msgid "%d minutes"
+msgstr "%d минути"
 
-#: ../../install_any.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-"Избрали сте следния(те) сървър(и): %s\n"
-"\n"
-"\n"
-"Тези сървъри се активират по подразбиране. Те нямат известни проблеми със\n"
-"сигурността, но може да се намерят нови. В този случай, ще трябва да сте\n"
-"сигурни, че ще надграждате възможно най-бързо.\n"
-"\n"
-"\n"
-"Наистина ли искате да инсталирате тези сървъри ?\n"
+msgid "Graphics card: %s"
+msgstr "Графична карта: %s"
 
-#: ../../install_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "System configuration"
-msgstr "Конфигурация на система"
+msgid "WebDAV transfer failed!"
+msgstr ""
 
-#: ../../install_gtk.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "System installation"
-msgstr "Инсталация на система"
+msgid "XFree configuration"
+msgstr "Настройка на XFree"
 
-#: ../../install_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Bringing down the network"
-msgstr "Изключване на мрежата"
+msgid "Choose action"
+msgstr "Изберете действие"
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bringing up the network"
-msgstr "Включвам мрежата"
+msgid "French Polynesia"
+msgstr "Френска Полинезия"
 
-#: ../../install_interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
+"По подразбиране, DrakX предполага че имате двубутонна мишка и ще включи\n"
+"симулиране на три бутона. DrakX автоматично разбира дали е PS/2, серийна "
+"или\n"
+"USB мишка.\n"
+"\n"
+"Ако искате да определите друг тип на мишката, изберете подходящ от списъка,\n"
+"който ще ви бъде представен.\n"
+"\n"
+"Ако изберете мишка различна от тази по подразбиране, ще ви бъде предоставен\n"
+"екран за проба. Използвайте бутоните и колелцето, за да проверите, че\n"
+"настройката е дора. Ако мишката не работи, както трябва, натиснете интервал\n"
+"или СЕ ВЪРНЕТЕ към \"Отказ\" и изберете пак."
+
+#: ../../services.pm:1
 #, c-format
-msgid "Partitioning failed: %s"
-msgstr "Неуспешно разделяне на: %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr "Поддръжка на OKI 4w и съвместими win-принтери."
 
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "Помощникът за разделине на дялове на DrakX намери следните решения:"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr "Пусни ALSA (Advanced Linux Sound Architecture) звуковата система"
 
-#: ../../install_interactive.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "I can't find any room for installing"
-msgstr "Не мога да намеря никакво място за инсталация"
+msgid "Installing driver for %s card %s"
+msgstr "Инсталиране на драйвер за %s платка %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
 msgstr ""
-"Сега можете да разделите %s.\n"
-"Когато сте готови, не забравяйте да запишете използвайки `w'"
+"Прехвърлили сте принтер по подразбиране (\"%s\"), Искате ли да го оставите "
+"по подразбиране в новата принтерна система %s ?"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Use fdisk"
-msgstr "Използвай fdisk"
+msgid "Enable Server"
+msgstr "Включва Сървър"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Custom disk partitioning"
-msgstr "Клиентско разделяне на диска"
+msgid "Ukrainian"
+msgstr "Украинска"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ВСИЧКИ съществуващи дялове и даннитe върху тях на %s ще бъдат загубени"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
+msgstr ""
+"Нямаше достъп до мрежата и такъв не можеше да бъде установен. Моля, "
+"проверете настройката и хардуера си. Тогава опитайте да настроите "
+"отдалечения принтер отново."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "имате повече от един твърди дискове, кой да използвам за инсталацията?"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "Сложете стартиращата дискета в устройство %s"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Erase entire disk"
-msgstr "Изтрий целия диск"
+msgid "Local network(s)"
+msgstr "Локална мрежа(и)"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Remove Windows"
 msgstr "Премахни Windows(TM)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "Няма FAT дялове за смяна на големината (или няма достаъчно място)"
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
+msgstr ""
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Firewire controllers"
+msgstr "USB контролери"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
+"LILO (или LInux LOader) и Grub са bootloader-и: те мога да стартират\n"
+"GNU/Linux или коя да е друга операционна система съществуваща на компютъра "
+"ви.\n"
+"Обикновенно, тези други операционни система се засичат и инсталират\n"
+"правилно. Ако това не става при вас, можете да добавяте записи на ръка в\n"
+"този екран. Гледайте да изберете верни параметри.\n"
+"\n"
+"\n"
+"Може да не искате да давате достъп до тези операционни системи на никой,\n"
+"в който случай можете да изтриете съответните записи. Но в такъв случай,\n"
+"ще се нуждаете от boot-дискета, за да ги стартирате !"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "FAT resizing failed: %s"
-msgstr "Неуспешно преразделяне на FAT: %s"
+msgid "System mode"
+msgstr "Системен режим"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "Изчислявам границите на Windows файловата система"
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"За да печатите на NetWare принтер ,трябва да знаете имео му и възможно\n"
+"адреса на сървъра, както и името на опашката,потребителското име,парола. "
+"(забележка! той може да е различен от TCP/IP име на хост!)"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Resizing"
-msgstr "Промяна на големината"
+msgid "Netmask:"
+msgstr "Мрежова маска:"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "дял %s"
+msgid "Append"
+msgstr "Допълване"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "Колко искате да оставите за windows?"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"WARNING!\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
 "\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
 msgstr ""
-"ВНИМАНИЕ!\n"
+
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
 "\n"
-"DrakX трябва да прераздели Вашия Windows дял. Бъдете внимателни: тази "
-"операция е\n"
-"опасна. Ако още не сте го направили, трябва първо да пуснете scandisk (и\n"
-"евентуално да използвате defrag) под Windows върху този дял, тогава \n"
-"повторете инсталациаята. Би било добре да направите архив на данните си.\n"
-"Когато сте сигурни, натиснете ОК."
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
-"Вашият Windows дял е много фрагментиран, моля първо стартирайте ''defrag''"
+"Автоматичната инсталация може да бъде напълно автоматизирана,\n"
+"в такъв случай ще превземе твърдия ви диск !!!\n"
+"(това е за предназначено за инсталиране на друга машина).\n"
+"\n"
+"Може би искате да повторите инсталацията.\n"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "Изчислява свободното място на Windows дял"
+msgid "Network printer \"%s\", port %s"
+msgstr "Мрежов принтер \"%s\", порт %s"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
 msgstr ""
-"Не възможност за работа с вашия FAT дял, \n"
-"поради получената грешка: %s"
+"Моля изберете кой мрежов адаптер да бъде включен към локалната ви мрежа."
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which partition do you want to resize?"
-msgstr "Кой дял желаете да промените?"
+msgid "OK to restore the other files."
+msgstr "OK за възстановяване на други файлове."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "Използвай свободното място на Windows дяла"
+msgid "Please choose your keyboard layout."
+msgstr "Моля, изберете подреждане на клавиатурата."
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr ""
-"Няма FAT дялове за използване като loopback (или няма достатъчно място на "
-"диска)"
+msgid "Printer Device URI"
+msgstr "Печатащо устройство URI"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Swap partition size in MB: "
-msgstr "Големина на swap-дяла в MB: "
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Root partition size in MB: "
-msgstr "Големина на root-дяла в MB: "
+msgid "Terminal-based"
+msgstr "Базирана на терминал"
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the sizes"
-msgstr "Изберете големините"
+msgid "Installing a printing system in the %s security level"
+msgstr "Инсталиране на принтерната система в %s ниво на сигурност"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "Кой дял искате да използвате за Linux4Win ?"
+msgid "The user name is too long"
+msgstr "Това име е твърде дълго"
 
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "Използвай за Windows дялът за loopback"
+msgid "Other OS (windows...)"
+msgstr "Друга ОС (Windows...)"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "There is no existing partition to use"
-msgstr "Няма дял, който мога да използвам"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
 
-#: ../../install_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use existing partitions"
-msgstr "Изпозване на съществуващ дял"
+msgid "Reading printer database..."
+msgstr "Четене на базата данни от принтери ..."
 
-#: ../../install_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "Няма достатъчно място за създаване на нов дял"
+msgid "Generate auto install floppy"
+msgstr "Подготви дискета за автоматична инсталация"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use free space"
-msgstr "Използвай свободното място"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "Трябва да имате FAT дял монтиран в /boot/efi"
+msgid "Somalia"
+msgstr "Сомалия"
 
-#: ../../install_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "No open source driver"
 msgstr ""
-"Нямате swap-дял\n"
-"\n"
-"Да продължа ли все пак ?"
 
-#: ../../install_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
 msgstr ""
-"Трябва да имате root-дял.\n"
-"Затова създайте дял (или цъкнете на съществуващ).\n"
-"Тогава изберете действие ``Място на монтиране'' и го сложете `/'"
+"Подобно на предишното ниво, но системата е напълно затворена.\n"
+"Нивото на сигурност е на максимума си."
 
-#: ../../install_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"Част от хардуера на компютъра ви се нуждае от ``собствените си'' драйвери, "
-"за да работи.\n"
-"Можете да намерите повече информация за това на: %s"
+msgid "Nicaragua"
+msgstr "Никарагуа"
 
-#: ../../install_messages.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"Поздравления, инсталацията е преключена.\n"
-"Премахнете стартовото устройство и натисене Enter за да рестартирайте.\n"
-"\n"
-"\n"
-"За информация относно поправки, на тази версия на Mandrake Linux,\n"
-"се консултирайте с Errata, на адрес : \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Информация за настройване на системата ви можете да намерите в\n"
-"слединсталационната глава от Official Mandrake Linux User's Guide."
+msgid "New Caledonia"
+msgstr "Нова Каледония"
 
-#: ../../install_messages.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr "http://www.mandrakelinux.com/en/91errata.php3"
+msgid "European protocol (EDSS1)"
+msgstr "Протокол Европа (EDSS1)"
 
-#: ../../install_messages.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
-msgstr ""
-"\n"
-"Внимание\n"
-"\n"
-"Моля, прочетете условията по-долу. Ако не сте съгласни с някое от тях,\n"
-"не можете да продължите инсталацията на следващия CD носител. Натиснете\n"
-"'Откажи', за да продължите инсталацията без тези носители.\n"
-"\n"
-"\n"
-"Някои компоненти съдържащи се в следващия CD носител не са разпространяват\n"
-"под GPL Лиценза или подобен такъв. Всеки такъв компонент е под условията\n"
-"и положенията на специфичния му лиценз. Моля, прочетете внимателно и изцяло\n"
-"тези специфични лицензи преди да използвате или разпространявате "
-"споменатите\n"
-"компоненти.\n"
-"Такива лицензи по принцип предотвратява преноса, копирането (освен с цел\n"
-"съхранение), разпространяването, обратния инженеринг, деасемблирането\n"
-"декомпилацията или модификацията на компонентите.\n"
-"Всяко нарушаване на спогодбата незабавно преустановява правата ви по\n"
-"специфичния лиценз. Освен ако специфичния лиценз ви дава такива права,\n"
-"обикновено не можете да инсталирате програмите на повече от една система\n"
-"или да ги пригаждате за използване в мрежа. Ако не сте сигурни, моля\n"
-"свържете се с дистрибуция или редактора на компонена.\n"
-"Прехвърлянето на трети лица или копирането на всяка компонента, включително\n"
-"на документацията, обикновено са забранени.\n"
-"\n"
-"\n"
-"Всички права на компонентите от следващия CD носител принадлежат на\n"
-"съответните им автори и са защитени като интелектуална собственост от\n"
-"законите за авторски права приложими за софтуерните програми.\n"
+msgid "Video mode"
+msgstr "Видео режим"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and  \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License,  you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of  the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of  "
-"downloading software components \n"
-"from one of Mandrake Linux sites  which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities.  Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A.  \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A.  \n"
-msgstr ""
-"Въведетние\n"
-"\n"
-"Операционната система и различните компоненти достъпни в Mandrake Linux "
-"дистрибуцията по-долу ще се\n"
-"наричат \"Софтуерен Продукти\". Софтуерните Продукти включват, но не се "
-"ограничават само до, набора\n"
-"програми, методи, правила и документация отнасяща се до операционната "
-"система и различните\n"
-"компоненти на Mandrake Linux дистрибуцията.\n"
-"\n"
-"\n"
-"1. Лицензионен договор\n"
-"\n"
-"Моля, прочетете внимателно този документ. Този документ е лицензионен "
-"договор между вас и\n"
-"MandrakeSoft S.A., който се отнася до Софтуерния Продукт. Чрез "
-"инсталирането, копирането\n"
-"или използването на Софтуерния Продукт по какъвто и да е начин вие изрично "
-"приемате и\n"
-"напълно се съгласявате да спазвате сроковете и условията на този Лиценз.\n"
-"Ако не се съгласявате с някоя част на Лиценза, нямате право да инсталирате, "
-"копирате или\n"
-"използвате Софтуерния Продукт. Опитите да се инсталира, копира или използва "
-"Софтуерния Продукт\n"
-"несъобразно със сроковете и условията на този Лиценз се забраняват и такива "
-"прекратяват правата\n"
-"ви по този Лиценз. При прекратяване на Лиценза, трябва незабавно да "
-"унижтожите всички\n"
-"копия на Софтуерния лиценз.\n"
-"\n"
-"\n"
-"2. Ограничена гаранция\n"
-"\n"
-"Софтуерните Продукти и приложената документация се предоставята \"такива "
-"каквито са\", без гаранция,\n"
-"в рамките на разрешеното от закона.\n"
-"MandrakeSoft S.A., при никакви обстоятелства и в рамките на закона, не е "
-"отговорна за каквито да e\n"
-"умишлени, случайни, преки или коствени щети (включително загуба на данни за "
-"работа, прекратяване на,\n"
-"работа, финансови загуби, законни данъци и наказания в резултат на съдебно "
-"решение или каквато и да е\n"
-"друга произлизащи от това загуби) произтичащи от употребата или от "
-"невъзможността да се употреби\n"
-"Софтуерния Продукт, даже ако MandrakeSoft S.A. да е известила за "
-"възможността или случването на такава загуба.\n"
-"\n"
-"ОГРАНИЧЕНА ОТГОВОРНОСТ СВЪРЗАНА С ПРИТЕЖАВАНЕТО ИЛИ ИЗПОЛЗВАНЕТО НА ЗАБРАНЕН "
-"СОФТУЕР В НЯКОИ СТРАНИ\n"
-"\n"
-"В рамките на закона, MandrakeSoft S.A. и нейните дистрибутори няма при "
-"никакви условия да бъдат\n"
-"отговорни за каквито и да било умишлени, случайни, преки или косвени щети "
-"(включително загуба на данни\n"
-"за работа, прекратяване на, работа, финансови загуби, законни данъци и "
-"наказания в резултат на\n"
-"съдебно решение или каквато и да е друга произлизащи от това загуби) "
-"произтичащи от притежаването\n"
-"и употребата на софтуерни компоненти и от изтеглянето на софтуерни "
-"компоненти от сайтовете на Mandrake Linux,\n"
-"които са забранени в някои страни от местното законодателство.\n"
-"Тази ограничена отговорност се отнася до, но не само за, мощните "
-"криптографски компоненти включени\n"
-"в Софтуерния Продукт.\n"
-"\n"
-"\n"
-"3. GPL Лиценза и придружаващи лицензи\n"
-"\n"
-"Софтуерният Продукт се състои от компоненти създадени от различни хора или "
-"организации. Повечето от\n"
-"тези компоненти се управляват от сроковете и условията на GNU Общия Публичен "
-"Лиценз, оттук нататък наричан\n"
-"\"GPL\", или подобни нему лицензи. Повечето от тези лицензи ви позволяват да "
-"използвате, копирате, или\n"
-"редистрибутирате компонентите, които те покриват. Моля, прочетете внимателно "
-"сроковете и условията на\n"
-"лицензионния договор на всеки компонент преди да го използвате. Всякакви "
-"въпроси относно лиценза\n"
-"на компонентите би трябвало да бъдат насочени към съответния им автор, а не "
-"към MandrakeSoft.\n"
-"Програмите разработени от MandrakeSoft S.A. се управляват от GPL Лиценза. "
-"Документацията написана\n"
-"от MandrakeSoft S.A. се управлява от специален лиценз. Моля, погледнете "
-"документацията за\n"
-"повече информация.\n"
-"\n"
-"\n"
-"4. Права за Интелектуална Собственост\n"
-"\n"
-"Всички права към компонентите на Софтуерния Продукт принадлежат на "
-"съответните им автори и са\n"
-"защитени от законите за интелектуалната собственост и за копиране прилагани "
-"за софтуерните програми.\n"
-"MandrakeSoft S.A. запазва правото си да модифицира и пригодява Софтуерния "
-"Продукт, като цяло или на\n"
-"части, по всякакъв начим о с всякакви цели.\n"
-"\"Mandrake\", \"Mandrake Linux\" и свързаните логота са запазена марка на "
-"MandrakeSoft S.A.\n"
-"\n"
-"\n"
-"5. Управляващи Закони\n"
-"\n"
-"Ако някоя част от този договор се води забранена, нелегална или неприложима "
-"според решение на съд,\n"
-"тази част се изключва от договора. Вие оставате ограничени от останалите "
-"приложими секции на договора.\n"
-"Сроковете и условията на този Лиценз се управляват от Законите на Франция.\n"
-"Всички спорове по условията на този лицез би било добре да се отнесат до "
-"съда. Като крайна мярка,\n"
-"споровете ще бъдат отнасяни до подходящия правни съдилища на Париж - "
-"Франция.\n"
-"За всякакви въпроси по този документ, моля, свържете се с MandrakeSoft S.A.\n"
-"\n"
-"ЗАБЕЛЕЖКА: Това е български приблизителен превод на документа, което "
-"означава, че той\n"
-"вероятно не е достатъчно точен. Като по-достоверен източник ползвайте "
-"неговия оригинал на\n"
-"английски.\n"
+msgid "Please enter your email address below "
+msgstr "Моля, въведете долу вашият адрес на Ел. поща"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Entering step `%s'\n"
-msgstr "Навлизам в етап `%s'\n"
+msgid "Oman"
+msgstr "Оман"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Help"
-msgstr "Помощ"
+msgid "Network Monitoring"
+msgstr "Мониторинг на мрежата"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "not configured"
-msgstr "не е конфигуриран"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Configure"
-msgstr "Настрока"
+msgid "New size in MB: "
+msgstr "Нова големина в MB: "
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Go on anyway?"
-msgstr "Да продължа ли все пак ?"
+msgid "Partition table type: %s\n"
+msgstr "Тип на таблицата с дялове: %s\n"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "There was an error installing packages:"
-msgstr "Появи се грешка при инсталиране на пакетите:"
+msgid "Authentication Windows Domain"
+msgstr "Идентификация на Windows Домейн"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "Появи се грешка при поръчването на пакетите:"
+msgid "US keyboard"
+msgstr "US клавиатура"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Buttons emulation"
+msgstr "Имитация на бутони"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", network printer \"%s\", port %s"
+msgstr ", мрежови принтер \"%s\", порт %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"Drakbackup activities via tape:\n"
+"\n"
 msgstr ""
-"Сменете CD-ROM !\n"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
 "\n"
-"Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато "
-"сте готови.\n"
-"Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-"
-"ROM."
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Refuse"
-msgstr "Откажи"
+msgid "Sending Speed:"
+msgstr "Скорост на изпращане:"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Accept"
-msgstr "Приеми"
+msgid "Halt bug"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Installing package %s"
-msgstr "Инсталиране на пакета %s"
+msgid "Mail alert configuration"
+msgstr "Конфигурация за подредба на поща"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "%d пакета"
+msgid "Tokelau"
+msgstr "Токелау"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Bosnian"
+msgstr "Босненска"
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "No details"
-msgstr "Подробности"
+msgid "Release: "
+msgstr "Моля изчакайте"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Details"
-msgstr "Подробности"
+msgid "Connection speed"
+msgstr "Скорост на връзката"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please wait, preparing installation..."
-msgstr "Моля, изчакайте, подготвяне на инсталацията"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Time remaining "
-msgstr "Оставащо време "
+msgid "Namibia"
+msgstr "Намибия"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Estimating"
-msgstr "Пресмятане"
+msgid "Database Server"
+msgstr "Сървър Бази-данни"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Installing"
-msgstr "Инсталирам"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "Изберете пакетите, които искате да инсталирате"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Minimal install"
-msgstr "Миминална инсталация"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с XFree %"
+"s,\n"
+"ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И МОЖЕ ДА ЗАБИЕ КОМПЮТЪРА "
+"ВИ.\n"
+"Картата ви се поддържа от XFree %s, който може да има по-добра поддръжка на "
+"2D."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Updating package selection"
-msgstr "Обновяване на избора на пакети"
+msgid "Please wait, setting security options..."
+msgstr "Моля, изчакайте, установявам опциите по защита..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Load/Save on floppy"
-msgstr "Зареди/Запази на дискета"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgstr "Неизвестен|CPH05X (bt878) [много производители]"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- Предишен"
+msgid "Launch the graphical environment when your system starts"
+msgstr "Пусни X-Window системата при стартиране"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Install"
-msgstr "Инсталирай"
+msgid "hourly"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr "Покажи автоматично отбелязаните пакети"
+msgid "          Successfuly Restored on %s       "
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "Не можете да изключите този пакет. Той трябва да бъде обновен"
+msgid "Making printer port available for CUPS..."
+msgstr "Прави порта на принтера наличен за CUPS..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Antigua and Barbuda"
+msgstr "Антигуа и Барбуда"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
 msgstr ""
-"Този пакет трябва да бъде обновен\n"
-"Сигурни ли сте, че искате да го изключите ?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "Не можете да оставите този пакет немаркиран. Той вече е инсталиран"
+msgid "Spanish"
+msgstr "Испанска"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "Това е нужен пакет, не може да бъде немаркиран"
+msgid "Start"
+msgstr "Старт"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "Не можете да отбележете/деотбележете този пакет"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "Следните пакети ще бъдат премахнати"
+msgid "Configuring applications..."
+msgstr "Настройка на приложения..."
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "Следните пакети ще бъдат инсталирани"
+msgid "Normal modem connection"
+msgstr "Обикновена модемна връзка"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, c-format
+msgid "File Selection"
+msgstr "Избор на файл"
+
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"You can't select this package as there is not enough space left to install it"
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
 msgstr ""
-"Не можете да оставите пакета немаркиран, защото нямате място да го "
-"инсталирате"
+"Коя ISDN настройка предпочитате ?\n"
+"\n"
+"* Старата настройка използва isdn4net. Съдържа мощни инструменти\n"
+"  но е капризна за настройка и не е стандартна.\n"
+"\n"
+"* Новата настройка е по-лесна за разбиране, по стандартна,\n"
+"  но с по-малко инструменти.\n"
+"\n"
+"Препоръчваме ви олекотената настройка.\n"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "Важност: %s\n"
+msgid "CUPS"
+msgstr "CUPS"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Size: %d KB\n"
-msgstr "Големина: %d KB\n"
+msgid "Run config tool"
+msgstr "Изпълнява инструмент за конфигуриране"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "Версия: %s\n"
+msgid "Bootloader installation"
+msgstr "Инсталация на Bootloader"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "Име: %s\n"
+msgid "Root partition size in MB: "
+msgstr "Големина на root-дяла в MB: "
 
 #: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "Лош пакет"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "Това е нужен пакет, не може да бъде немаркиран"
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Other"
-msgstr "Друга"
+msgid "Etherboot ISO image is %s"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "Обща големина: %d / %d MB"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) е Domain Name Server (DNS), който се използва да превърне\n"
+"името на хоста до IP адрес."
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Next ->"
-msgstr "Следващ ->"
+msgid "Disconnect..."
+msgstr "Отвързване ..."
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Избиране на пакети един по един"
+msgid "Saint Lucia"
+msgstr "Санта Лучия"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "Избор на група пакети"
+msgid "Report"
+msgstr "Рапорт"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
-msgstr ""
-"Вашата система е с малки ресурси. Може да имате проблеми с инсталирането\n"
-"на Mandrake Linux. Ако се появи проблем опитайте с текстовата инсалация. "
-"Зацелта,\n"
-"натиснете 'F1', когато стартирате от CDROM и въведете 'теьт'."
+msgid "Palau"
+msgstr "Палау"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Save packages selection"
-msgstr "Запази избор на пакети"
+msgid "level"
+msgstr "ниво"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "Automated"
-msgstr "Автоматизиран"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Replay"
-msgstr "Повтори"
+msgid "Package Group Selection"
+msgstr "Избор на група пакети"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "Restore Via Network Protocol: %s"
 msgstr ""
-"Автоматичната инсталация може да бъде напълно автоматизирана,\n"
-"в такъв случай ще превземе твърдия ви диск !!!\n"
-"(това е за предназначено за инсталиране на друга машина).\n"
-"\n"
-"Може би искате да повторите инсталацията.\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Generate auto install floppy"
-msgstr "Подготви дискета за автоматична инсталация"
+msgid "You can configure each parameter of the module here."
+msgstr "Вие може да конфигурирате всеки параметър на модулът тук."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Reboot"
-msgstr "Престартира"
+msgid "Choose the resolution and the color depth"
+msgstr "Изберете разделителна способност и дълбочина на цветовете"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Emulate third button?"
+msgstr "Да симулирам ли трети бутон ?"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
 msgstr ""
-"Някои етапи не са завършени.\n"
-"\n"
-"Наистина ли искате да излезете сега ?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Creating auto install floppy..."
+msgid "Mount"
+msgstr "Монтирай"
+
+#: ../../standalone/drakautoinst:1
+#, c-format
+msgid "Creating auto install floppy"
 msgstr "Подготвям дискета с автоматична инсталация"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "Инсталиране на системата"
+
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "Сложете празна дискета в устройство %s"
+msgid "text box height"
+msgstr "височина на рамка за текст"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
-msgstr ""
-"Може би се нуждаете да промените Open Firmware стартовото устройство,\n"
-" за да пуснете зареждащата програма. Ако не виждате подсказката и при\n"
-" рестартиране, задръжте Command-Option-O-F при рестартиране и въведете:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" След което напишете: shut-down\n"
-"При следващото рестартиране би трябвало да видете подсказката."
+msgid "State"
+msgstr "Състояние"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "Инсталацията на bootloader провалена. Появи се следната грешка:"
+msgid "Be sure a media is present for the device %s"
+msgstr "Проверете имате ли дискета в устройството %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing bootloader"
-msgstr "Инсталиране на bootloader"
+msgid "Enable multiple profiles"
+msgstr "Включва много профили"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+"These options can backup and restore all files in your /etc directory.\n"
 msgstr ""
-"Грешка при инсталиране на aboot, \n"
-"да се опитам ли да продължа инсталацията дори, ако това унижтожи първия дял ?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "Искате ли да използвате aboot ?"
+msgid "Local printer"
+msgstr "Локален принтер"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Files Restored..."
 msgstr ""
-"Изглежда имате старовремска или неизвестна\n"
-"машина, на която yaboot няма да проработи.\n"
-"Инсталацията ще продължи, но ще трябва\n"
-"да иползвате BootX, за да стартирате машината си"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "Подготовка на bootloader"
+msgid "Package selection"
+msgstr "Избор на пакети"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Domain Admin Password"
-msgstr "Парола за администратор на домейн"
+msgid "Mauritania"
+msgstr "Мавритания"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Domain Admin User Name"
-msgstr "Име на администратор на домейн"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Windows Domain"
-msgstr "Windows домейн"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
+"Няма намерен локален принтер! За да инсталирате ръчно принтер, въведете име "
+"на устройство/име на файл във входното поле (Паралелни портове /dev/lp0, /"
+"dev/lp1, ..., съответсващи на LPT1:, LPT2:, ..., 1-ви USB принтер: /dev/usb/"
+"lp0, 2-ри USB принтер: /dev/usb/lp1, ...)."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Authentication Windows Domain"
-msgstr "Идентификация на Windows Домейн"
+msgid "All primary partitions are used"
+msgstr "Всички първични дялове се използват"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
+"След като стане това, препоръчваме ви да рестартирате X\n"
+"средата си, за да избегнете проблеми със смяната името на хоста."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "NIS Server"
-msgstr "NIS сървър"
+msgid "Automatic detection and configuration of hardware at boot."
+msgstr "Автоматично засичане и настройка на хардуера при стартиране."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "NIS Domain"
-msgstr "NIS домейн"
+msgid "Installation Server Configuration"
+msgstr "Конфигуриране на Инсталационен Сървър"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Authentication NIS"
-msgstr "NIS идентификация"
+msgid "Configuring IDE"
+msgstr "Настройка на IDE"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "NIS"
-msgstr "NIS"
+msgid "Network functionality not configured"
+msgstr "Функционалността на мрежата не е настроена"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "LDAP Server"
-msgstr "LDAP сървър"
+msgid "Configure module"
+msgstr "Настройка на модул"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "LDAP Base dn"
-msgstr "LDAP Базов dn"
+msgid "Cocos (Keeling) Islands"
+msgstr "Кокосови Острови"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Authentication LDAP"
-msgstr "LDAP ауторизация"
+msgid "Disconnecting from the Internet "
+msgstr "Разкачвам от Интернет "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LDAP"
-msgstr "LDAP"
+msgid "You'll need to reboot before the modification can take place"
+msgstr "Трябва да рестартирате, преди промените да влязат в сила"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Local files"
-msgstr "Локални файлове"
+msgid "Provider phone number"
+msgstr "Телефонен номер на доставчика"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Authentication"
-msgstr "Идентификация"
+msgid "Host %s"
+msgstr "Хост %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "Паролата е прекалено проста (трябва да бъде дълга поне %d символа)"
+msgid "Armenia"
+msgstr "Армения"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No password"
-msgstr "Без парола"
+msgid "Fiji"
+msgstr "Фиджи"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Set root password"
-msgstr "Въведете парола за root"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
+msgstr ""
+"Аргументи: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Задава за паролата минималната дължина, минимален брой цифри и минимален "
+"брой главни букви."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
-msgstr "Вие не сте конфигурирали X. Сигурни ли сте, че искате това?"
+msgid "Second floppy drive"
+msgstr "Второ флопи устройство"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Services: %d activated for %d registered"
-msgstr "Услуги: %d активирани от %d регистрирани"
+msgid "About Harddrake"
+msgstr "Относно Harddrake"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Services"
-msgstr "Услуги"
+msgid "Drive capacity"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "System"
-msgstr "Система"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Порт"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
+msgstr ""
+"Сложете дискета във флопито\n"
+"Всички данни, намиращи се върху дискетата, ще бъдат загубени"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Bootloader"
-msgstr "Bootloader"
+msgid "Size: %s"
+msgstr "Размер: %s"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Главен"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Control and Shift keys simultaneously"
+msgstr "Control и Shift клавиши едновремено"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "изключи"
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "secondary"
+msgstr "втори"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "activated"
-msgstr "активирай сега"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "View Backup Configuration."
+msgstr "Преглед на Конфигурация за резервно копие."
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Firewall"
-msgstr "Сървър, Firewall/Рутер"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, report check result to syslog."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Security"
-msgstr "Сигурност"
+msgid "No password"
+msgstr "Без парола"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Security Level"
-msgstr "Ниво на сигурност"
+#: ../../lang.pm:1
+#, c-format
+msgid "Nigeria"
+msgstr "Нигерия"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Network"
-msgstr "Мрежа"
+msgid "There is no existing partition to use"
+msgstr "Няма дял, който мога да използвам"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Мрежов интерфейс"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Graphical interface"
-msgstr "Графичен интерфайс"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "Нямате мрежов адаптер!"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hardware"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
 msgstr ""
+"За да печатате на socket или TCP принтер, трябва да предоставите името на "
+"хоста на принтера и, евентуално, номер на порт. На HP JetDirect сървъри, "
+"номерът на порта обикновенно е 9100, на други сървъри може да варира. Вижте "
+"ръковоството на хардуера си."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV карта"
+msgid "Hard drive information"
+msgstr "Информацията за твърдия диск"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
-msgstr "Няма открита звукова карта. Опитайте \"harddrake\" след инсталацията"
+msgid "Russian"
+msgstr "Руска"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Jordan"
+msgstr "Йордания"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
-msgstr ""
-"Изпълнете \"sndconfig\" след инсталация за да конфигурирате вашата звукова "
-"карта"
+msgid "Hide files"
+msgstr "Скрий файловете"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "Имате ли ISA звукова карта?"
+msgid "Auto-detect printers connected to this machine"
+msgstr "Автоматично открива принтери свързани към тази машина"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Sound card"
-msgstr "Звукова карта"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Отдалечен CUPS сървър"
+msgid "Sorry, no floppy drive available"
+msgstr "Съжалявам няма флопи"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No printer"
-msgstr "Няма принтер"
+msgid "Bolivia"
+msgstr "Боливия"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer"
-msgstr "Принтер"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Mouse"
-msgstr "Мишка"
+msgid "Bad package"
+msgstr "Лош пакет"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Timezone"
-msgstr "Часова зона"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
+msgstr ""
+"Превръща вашата машина в мощен Linux сървър с няколко цъквания на мишката: "
+"Web сървър, поща, firewall, router, файлов и принт сървър, ..."
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Keyboard"
-msgstr "Клавиатура"
+msgid "DrakSec Basic Options"
+msgstr "Основни опции на DrakSec "
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Summary"
-msgstr "Обобщение"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "NTP Server"
-msgstr "NTP сървър"
+msgid "Romania"
+msgstr "Румъния"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
-msgstr "Автоматична синхронизация на времето (използва NTP)"
+msgid "choose device"
+msgstr "избира устройство"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Hardware clock set to GMT"
-msgstr "Хадруерният ви часовник е настроен по GMT"
+msgid "Canada"
+msgstr "Канада"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "Коя е времевата ви зона ?"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "Искате ли да настроите печата ?"
+msgid "Remove from LVM"
+msgstr "Премахни от LVM"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "Не мога да направя 'fork': %s"
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Timezone"
+msgstr "Часова зона"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "Свързване с огледалния сървър за получаване на списъка с пакетите"
+msgid "German"
+msgstr "Немска"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "Изберете огледален сървър,от който да получите пакетите"
+msgid "Next ->"
+msgstr "Следващ ->"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
-"Свързване с Mandrake Linux web сайт за получаване на списъка с налични "
-"огледални сървъри..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
 "\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
+"\n"
+"Вероятно е този дял да е\n"
+"Драйвер-дял, може би трябва\n"
+"трябва да го оставите.\n"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "Сложете дискета за обновяване на модули в устройство %s"
-
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "Сложете стартиращата дискета в устройство %s"
+msgid "Guinea-Bissau"
+msgstr "Гвинея-Бисау"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "След инсталационна настройка"
+msgid "Horizontal refresh rate"
+msgstr "Хоризонтална скорост на възстановяване"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Installing package %s\n"
-"%d%%"
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
 msgstr ""
-"Инсталирам пакет %s\n"
-"%d%%"
+"Не мога да махна точката на монтиране, тъй като дялът се използва за "
+"loopback.\n"
+"Първо махнете loopback"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "Подготвям инсталацията"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "CD-ROM озаглавен \"%s\""
+msgid "USB controllers"
+msgstr "USB контролери"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"Ако имате всички CD-та от списъка по-горе, натиснете Ok.\n"
-"Ако нямате нито едно от тези CD-та, натиснете Отмяна.\n"
-"Ако ви липсват някои CD-та, махнете ги, и натиснете Ok. "
+msgid "What norm is your TV using?"
+msgstr "Какъв е типът на използваният TV ?"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "All"
-msgstr "Всички"
+msgid "Type:"
+msgstr "Тип: "
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
-msgstr "Наистина минимална инсталация (особенно без urpmi)"
+msgid "Share name"
+msgstr "Общо име"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "With basic documentation (recommended!)"
-msgstr "С базова документация (препоръчва се!)"
+msgid "enable"
+msgstr "включи"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "With X"
-msgstr "С X"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr ""
+"Свързване с Mandrake Linux web сайт за получаване на списъка с налични "
+"огледални сървъри..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
 msgstr ""
-"Вие не сте избрали никаква група от пакети.\n"
-"Моля, изберете минималната инсталация кояти искате:"
+"Изникна проблем при рестартирането на мрежата:\n"
+"\n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Type of install"
-msgstr "Тип инсталация"
+msgid "Remove the loopback file?"
+msgstr "Да премахна ли loopback файла ?"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Selected size is larger than available space"
 msgstr "Избраната големина е по-голяма от достъпното пространство"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "Сложете дискета съдържаща избор на пакети"
+msgid "NCP server name missing!"
+msgstr "Липсва име на NCP сървър !"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Loading from floppy"
-msgstr "Зареждане от дискета"
+msgid "Please choose your country."
+msgstr "Моля, изберете вашата страна."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Package selection"
-msgstr "Избор на пакети"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "Лош backup-файл"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "Запази на дискета"
+msgid "Laotian"
+msgstr "Лаоска"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Load from floppy"
-msgstr "Зареди от дискета"
+msgid "Samoa"
+msgstr "Самоа"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
 msgstr ""
-"Може изберете зареждане или запис на избора на пакети на флопи.\n"
-"Форматът е същият като auto_install генерираните дискети."
+"rstat протокола позволява на мрежовите потребители да извличат\n"
+"параметрите на възможностите за всяка машина на мрежата."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
+msgid "Re-generating list of configured scanners ..."
 msgstr ""
-"Системата ви няма достатъчно място за инсталация или обновяване (%d > %d)"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "Търся налични пакети..."
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "Търся пакети за обновяване"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking at packages already installed..."
-msgstr "Търси във вече инсталираните пакети..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "Търся налични пакети и препостроявам rpm базата данни..."
+msgid "Scanner"
+msgstr "Скенер"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
+msgid "Warning: testing this graphic card may freeze your computer"
 msgstr ""
-"Няма достатъчно swap за приключване на инсталацията, моля добавете малко"
+"Внимание: тестването на тази графична карта може да замрази компютъра ви"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr ""
-"Неуспешна проверка на файлва система %s. Искате ли да оправите грешките? "
-"(бъдете внимателни, може да загубите данни)"
+"Потребителското име може да включва само малки букви, номера, `-' и `_'"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Check bad blocks?"
-msgstr "Проверка за лоши сектори ?"
+msgid "Menudrake"
+msgstr "Menudrake"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "Изберете дяловете, които искате да форматирате"
+msgid "Welcome To Crackers"
+msgstr "Добре дошли при Cracker-ите"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "Налага се ра рестартирате, преди модификациите да предизвикат ефект"
+msgid "Module options:"
+msgstr "Опции на модула:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Secure your networks with the Multi Network Firewall"
 msgstr ""
-"Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, "
-"за да стартирате системата си, ще трябва да създадете стартиращо поле в "
-"DiskDrake"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the mount points"
-msgstr "Изберете места за монтиране"
+msgid "Go on without configuring the network"
+msgstr "Продължи без настойка на мрежата"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Претърсване на дяловете за намиране на точки на монтиране"
+msgid "Abort"
+msgstr "Отказ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No partition available"
-msgstr "няма дялове на разположение"
+msgid "No password prompt on %s at port %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "Настройка на IDE"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "Моля, проверете дали искте да изполвате непренавивашо се устройство."
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "Използвай свободното място"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "Настройка на PCMCIA картите ..."
+msgid "\t-CDROM.\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr ""
+"Вашият Windows дял е много фрагментиран, моля първо стартирайте ''defrag''"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Button 3 Emulation"
-msgstr "Имитация на 3 бутона"
+msgid "Dvorak (Norwegian)"
+msgstr "Дворак (Норвежка)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Button 2 Emulation"
-msgstr "Имитация на 2 бутона"
+msgid "Hard Disk Backup Progress..."
+msgstr "Прогрес за резервно копие на твърд диск..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Buttons emulation"
-msgstr "Имитация на бутони"
+msgid "Unable to fork: %s"
+msgstr "Не мога да направя 'fork': %s"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "Моля, изберете към кой сериен порт е свързана мишката ви."
+msgid "Type: "
+msgstr "Вид: "
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mouse Port"
-msgstr "Порт на мишката"
+msgid "<-- Edit Client"
+msgstr "<-- Редактира клиент"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Please choose your type of mouse."
-msgstr "Моля, изберете тип на мишката."
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "Ключ за криптиране"
+msgid "no fonts found"
+msgstr "няма намерени шрифтове"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Upgrade %s"
-msgstr "Обновява %s"
+msgid "Mouse"
+msgstr "Мишка"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "Това нова инсталация ли е или обновяване ?"
+msgid "not enough room in /boot"
+msgstr "няма достатъчно място за /boot"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Install/Upgrade"
-msgstr "Инсталирай/Обнови"
+msgid "Choosing an arbitratry driver"
+msgstr "Избор на случаен драйвер"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "Ето пълен списък на достръпните клавиатури"
+msgid "Host name"
+msgstr "Име на хост:"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please choose your keyboard layout."
-msgstr "Моля, изберете подреждане на клавиатурата."
+msgid "Liechtenstein"
+msgstr "Лихтенщайн"
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Quit"
-msgstr "Изход"
+msgid "the color of the progress bar"
+msgstr "цветът на лентата за прогрес"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "License agreement"
-msgstr "Лицензионен договор"
+msgid "Suppress Fonts Files"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "An error occurred"
-msgstr "Появи се грешка"
+msgid "Add to RAID"
+msgstr "Прибави към RAID"
 
-#: ../../install_steps_newt.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
 msgstr ""
-"  <Tab>/<Alt-Tab> между елементите  | <Space> избира  | <F12> следващ екран"
-
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "Инсталация на Mandrake Linux %s"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "Няма флопи устройство"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Принтерът \"%s\" е бил успешно добавен към Star Office/OpenOffice.org/GIMP."
 
-#: ../../install_steps.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "Добре дошли в %s"
+msgid "No floppy drive available!"
+msgstr "Няма флопи устройство!"
 
-#: ../../install_steps.pm:1
-#, c-format
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
 msgstr ""
-"Някои важни пакети не се инсталираха както трябва.\n"
-"Или CDROM устройството ви или компакт диска ви е дефектен.\n"
-"Проверете компакт диска на инсталирания компютър използвайки \"rpm -qpl "
-"Mandrake/RPMS/*.rpm\"\n"
+"За да видите списък на достъпните опции за текущия принтер, или прочетете "
+"списъка показан по-долу или цъкнете на бутона \"Списък с опции за печат\".%s%"
+"s\n"
 
-#: ../../install_steps.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "Дублирай точката на монтиране %s"
+msgid "Continue anyway?"
+msgstr "Продължение въпреки всичко ?"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
-msgstr ""
-"Появи се грешка, но не знам как да се справя с нея деликатно.\n"
-"Можете да продължите на свой риск."
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
+msgstr "Ако вашият принтер не е в списъка, изберете съвместим или подобен."
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please wait"
-msgstr "Моля изчакайте"
+msgid "Printer"
+msgstr "Принтер"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ok"
-msgstr "Ok"
+msgid "Saudi Arabia"
+msgstr "Саудитска Арабия"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Finish"
-msgstr "Завърши"
+msgid "Internet"
+msgstr "Интернет"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "Basic"
-msgstr "Базов"
+msgid "Some devices were added:\n"
+msgstr ""
 
-#: ../../interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Advanced"
-msgstr "Напредничав"
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "Геометрия: %s цилиндри, %s глави, %s сектори\n"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove"
-msgstr "Премахва"
+msgid "Printing on the printer \"%s\""
+msgstr "Печатане на принтер \"%s\""
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Modify"
-msgstr "Модифицира"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgstr ""
+"/etc/hosts.allow и /etc/hosts.deny вече са конфигурирани - не са променени"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add"
-msgstr "Добавя"
+msgid "Restore From Tape"
+msgstr "Възстановява от лента"
 
-#: ../../interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Choose a file"
-msgstr "Изберете файл"
+msgid "Choose the profile to configure"
+msgstr "Изберете профил за настройка"
 
-#: ../../keyboard.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
 msgstr ""
-"Тук може да изберете клавиш или клавишна комбинация, която \n"
-"ще ви позволи да избирате различни клавиатурни подредби\n"
-"(напр. latin и не latin)"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr "Десен \"Windows\" клавиш"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Left \"Windows\" key"
-msgstr "Ляв \"Windows\" клавиш"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "\"Menu\" key"
-msgstr "\"Menu\" клавиш"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "Настройка на мрежата"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Alt and Shift keys simultaneously"
-msgstr "Alt и Shift клавиши едновременно"
+msgid "Mount points should contain only alphanumerical characters"
+msgstr "Точките за монтиране трябва да съдържат само букви и цифри"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr "Ctrl и Alt клавиши едновременно"
+msgid "Restarting printing system..."
+msgstr "Рестартиране на принтерната система"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "CapsLock key"
-msgstr "CapsLock клавиш"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
-msgstr "Control и Shift клавиши едновремено"
+msgid "See hardware info"
+msgstr "Виж хардуерната информация"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Both Shift keys simultaneously"
-msgstr "Двата Shift клавиша едновременно"
+msgid "First sector of boot partition"
+msgstr "Първи сектор от стартиращия се дял"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Right Alt key"
-msgstr "Десен Alt клавиш"
+msgid "Printer manufacturer, model"
+msgstr "Производител на принтера, модел"
 
-#: ../../keyboard.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Yugoslavian (latin)"
-msgstr "Югославска (латиница)"
+msgid "PDQ - Print, Don't Queue"
+msgstr "PDQ - Печатай, Без Опашка"
 
-#: ../../keyboard.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Виетнамска \"числова редица\" QWERTY"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "US клавиатура (международна)"
+msgid "Subnet Mask:"
+msgstr "Маска на подмрежа:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "US keyboard"
-msgstr "US клавиатура"
+msgid "LiLo and Bootsplash themes installation successfull"
+msgstr "LiLo и Bootsplash теми са успешно инсталирани"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "UK keyboard"
-msgstr "UК клавиатура"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
+msgstr ""
+"Двата критични параметъра са вертикалната скорост на възстановяване, която "
+"отразява скоростта, \n"
+"с която целият екран се възстановява, и най-важното - хоризонталната\n"
+"синхронизационна скорост, която отразява скоростта, с която се изписват "
+"хоризонталните линии.\n"
+"\n"
+"МНОГО Е ВАЖНО да изберете такава синхронизационната скорост, която да "
+"отговаря на възможностите на Вашия монитор - в противен случай можете да "
+"повредите монитора си.\n"
+" Ако имате някакви съмнения, изберете консервативна настройка."
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Ukrainian"
-msgstr "Украинска"
+msgid "Modify"
+msgstr "Модифицира"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "Турска (модерен \"Q\" модел)"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
+msgstr ""
+"\n"
+"Командите \"%s\" и \"%s\" също така позволяват да поправяте избраните "
+"настройки за определена работа на принтера. Просто добавете исканите "
+"настройки към командния ред, напр. \"%s <file>\".\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "Турска (традиционен \"F\" модел)"
+msgid "Need hostname, username and password!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Tajik keyboard"
-msgstr "Таджикистанска клавиатура"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "Тайванска клавиатура"
+msgid "HardDrake"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "Тамилска (пишеща машина)"
+msgid "new"
+msgstr "нов"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Tamil (ISCII-layout)"
-msgstr "Тамилска (ISCII-подредба)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "Искате ли да настроите печата ?"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Сръбска (кирилица)"
+msgid "Wizard"
+msgstr "Магьосник"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "Словашка (QWERTY)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Edit selected server"
+msgstr "засечена %s"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "Словашка (QWERTZ)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "Моля, изберете пакетите, които искате да инсталирате."
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Slovenian"
-msgstr "Словенска"
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "Налага се ра рестартирате, преди модификациите да предизвикат ефект"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Swedish"
-msgstr "Шведска"
+msgid "Do not include the browser cache"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "Руска (Yawerty)"
+msgid "Please, choose your keyboard layout."
+msgstr "Моля, изберете подреждане на клавиатурата."
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
 #, c-format
-msgid "Russian"
-msgstr "Руска"
+msgid "Standard"
+msgstr "Стандартна"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Romanian (qwerty)"
-msgstr "Румънска (qwerty)"
+msgid "Please choose your mouse type."
+msgstr "Моля, изберете тип на мишката."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Romanian (qwertz)"
-msgstr "Румънска (qwertz)"
+msgid "Connect..."
+msgstr "Свързване ..."
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "Канадска (Квебек)"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "ННеуспешна настройка на принтер \"%s\"!"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "Португалска"
+msgid "not configured"
+msgstr "не е конфигуриран"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Полска (QWERTZ наредба)"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Полска (QWERTY наредба)"
+msgid "About"
+msgstr "Относно"
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "Норвежка"
+msgid "Proxies configuration"
+msgstr "Настройка на proxy"
 
-#: ../../keyboard.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "Холандска"
+msgid "GlidePoint"
+msgstr "GlidePoint"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Maltese (US)"
-msgstr "Малтийска (US)"
+msgid "Start: sector %s\n"
+msgstr "Начало: сектор %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Maltese (UK)"
-msgstr "Малтийска (UK)"
+msgid "Network interface already configured"
+msgstr "Мрежовият интерфейс вече е конфигуриран"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Монголска (кирилица)"
+msgid "Couldn't access the floppy!"
+msgstr "Нямам достъп до флопи!"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Myanmar (Burmese)"
-msgstr "Майнмар (бирманска)"
+msgid "connecting to Bugzilla wizard ..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Macedonian"
-msgstr "Македонска"
+msgid "Mail Server"
+msgstr "Пощенски сървър"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Malayalam"
-msgstr "Малайлам"
+msgid "Please click on a partition"
+msgstr "Моля, цъкнете на дяла"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Latvian"
-msgstr "Латвийска"
+msgid "Linux"
+msgstr "Linux"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "Литвийска \"фонетичен\" QWERTY"
+msgid "Have a nice day!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "Литвийска \"числова редица\" QWERTY"
+msgid "across Network"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Литвийска AZERTY (нова)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Литвийска AZERTY (стара)"
+msgid "Upgrade %s"
+msgstr "Обновява %s"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Laotian"
-msgstr "Лаоска"
+msgid "Select Printer Connection"
+msgstr "Изберете връзка към принтера"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Latin American"
-msgstr "Латиноамериканска"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Корейска клавиатура"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Японска 106 клавиша"
+msgid "IP Range Start:"
+msgstr "Начало на IP обхват:"
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Inuktitut"
-msgstr "Инуктитут"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (често наричан inetd) пуска различни други\n"
+"Интернет услуги. Той отговаря за пускането на много услуги от рода на\n"
+"telnet, ftp, rsh и rlogin. Изключването на inetd изключва всички услуги,\n"
+"за които отговаря."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Italian"
-msgstr "Италианска"
+msgid "the height of the progress bar"
+msgstr "височината на лентата за прогрес"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Icelandic"
-msgstr "Исландска"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Iranian"
-msgstr "Иранска"
+msgid "Argentina"
+msgstr "Аржентина"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "Израелска (фонетична)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Позволява/Забранява broadcasted icmp echo."
 
-#: ../../keyboard.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "Израелска"
+msgid "Domain Name Server"
+msgstr "Domain Name Server"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Croatian"
-msgstr "Хърватска"
+msgid "Security Level:"
+msgstr "Ниво на сигурност:"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "Унгарска"
+msgid "Mount points must begin with a leading /"
+msgstr "Точките на монтиране трябва да започват с /"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Gurmukhi"
-msgstr "Гурмукчи"
+msgid "Postfix Mail Server"
+msgstr "Postfix Пощенски сървър"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Gujarati"
-msgstr "Гуаджарати"
+msgid "Quit without saving"
+msgstr "Изход без запис"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Greek"
-msgstr "Гръцка"
+msgid "Yemen"
+msgstr "Йемен"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "Грузинска (\"Латинска\" наредба)"
+msgid "This product is available on the MandrakeStore Web site."
+msgstr "Този продукт е достъпен от web сайта на MandrakeStore"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "Грузинска (\"Руска\" наредба)"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
+msgstr ""
+"Моля, въведете максималният размер\n"
+" позволен за Drakbackup"
 
-#: ../../keyboard.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "French"
-msgstr "Френска"
+msgid "=> There are many things to choose from (%s).\n"
+msgstr "=> Има много неща за избор от (%s).\n"
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "Финландска"
+msgid "Hard drive detection"
+msgstr "Засичане на дисковете"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "Испанска"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
+"Вие не сте избрали никаква група от пакети.\n"
+"Моля, изберете минималната инсталация кояти искате:"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Estonian"
-msgstr "Естонска"
+msgid "Please enter the WebDAV server URL"
+msgstr "Моля въведете WebDAV сървър URL"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Дворак (Шведска)"
+msgid "Tajikistan"
+msgstr "Таджикистан"
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Дворак (Норвежка)"
+msgid "Accept"
+msgstr "Приеми"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Дворак (US)"
+msgid "Description"
+msgstr "Описание"
 
-#: ../../keyboard.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Danish"
-msgstr "Датска"
+msgid "Error opening %s for writing: %s"
+msgstr "Грешка при отваряне на %s за запис: %s"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Devanagari"
-msgstr "Давенаджари"
+msgid "Mouse type: %s\n"
+msgstr "Тип мишка: %s\n"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "Немска (без неработещи клавиши)"
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Картата ви може да има поддръжка на хардуерно 3D ускорение в XFree %s."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "German"
-msgstr "Немска"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "Моля, изберете размера на вашето CD/DVD (Mb)"
 
-#: ../../keyboard.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "Чешка (QWERTY)"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "Чешка (QWERTZ)"
+msgid "Expert Area"
+msgstr "Допълнителни"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "Швейцарска (френски наредба)"
+msgid "Choose a monitor"
+msgstr "Изберете монитор"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "Швейцарска (немска наредба)"
+msgid "Empty label not allowed"
+msgstr "Празен етикет не е разрешен"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Belarusian"
-msgstr "Беларуска"
+msgid "Maltese (UK)"
+msgstr "Малтийска (UK)"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Bosnian"
-msgstr "Босненска"
+msgid "I can't add any more partition"
+msgstr "Не мога да добавя повече дялове"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "Бразилска (ABNT-2)"
+msgid "Size in MB: "
+msgstr "Големина в MB: "
 
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Bulgarian (BDS)"
-msgstr "Българска (BDS)"
+msgid "Remote printer"
+msgstr "Отдалечен принтер"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "Българска (фонетичен)"
+msgid "Please choose a language to use."
+msgstr "Моля, изберете език за използване."
 
-#: ../../keyboard.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Bengali"
-msgstr "Бенгалска"
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"ВНИМАНИЕ: Това устройство вече е настроено да се свързва към Интернет.\n"
+"Просто приемете, за да оставите устройството настроено.\n"
+"Поправката на полетата по-долу ще презапише тази настройка."
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Belgian"
-msgstr "Белгийска"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"Мога да настроя компютъра ви за влизане в системата автоматично като някой "
+"потребител."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Азербайджанска (латиница)"
+msgid "Floppy format"
+msgstr "Форматира флопи"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Arabic"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "Арменска (фонетичен)"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Generic Printers"
+msgstr "Принтер"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "Арменска (пишеща машина)"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "Арменска (стара)"
+msgid "The scanners on this machine are available to other computers"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Albanian"
-msgstr "Албанска"
+msgid "First sector of the root partition"
+msgstr "Първи сектор от стартиращия се дял"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Polish"
-msgstr "Полска"
+msgid "Alternative drivers"
+msgstr "Алтернативни драйвери"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dvorak"
-msgstr "Дворак"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Zimbabwe"
-msgstr "Зимбабве"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Zambia"
-msgstr "Замбия"
+msgid "Cape Verde"
+msgstr "Капо Верде"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "South Africa"
-msgstr "Южна Африка"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Serbia"
-msgstr "Сръбия"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mayotte"
-msgstr "Майот"
+msgid "Guam"
+msgstr "Гуам"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Yemen"
-msgstr "Йемен"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
+msgstr ""
+"Моля, изберете порта на който вашият принтер е закачен или въведете име на "
+"устройство/име на файл във входното поле"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Samoa"
-msgstr "Самоа"
+msgid "/Options/Test"
+msgstr "/Опции/Тест"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Wallis and Futuna"
-msgstr "Уолис и Футуна Острови"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
+msgstr ""
+"Това ниво се използва с внимание. Това кара системата ви по-лесна за\n"
+"употреба, но е по-чувствително: не трябва да бъде използвана на машини\n"
+"свързани с други или по Интернет. Няма достъп с пароли."
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Vanuatu"
-msgstr "Вануату"
+msgid "Mounting partition %s"
+msgstr "Форматира дял %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Vietnam"
-msgstr "Виетнам"
+msgid "User name"
+msgstr "Потребителско име"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
-msgstr "Вирджински Острови (САЩ)"
+msgid "New configuration (isdn-light)"
+msgstr "Нова настройка (isdn-light)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Virgin Islands (British)"
-msgstr "Вирджински Острови (Британски)"
+msgid "Userdrake"
+msgstr "Userdrake"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Venezuela"
-msgstr "Венецуела"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "Кой дял искате да използвате за Linux4Win ?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
-msgstr "Свети Винсент и Гренадин"
+msgid "Backup system"
+msgstr "Система за съхранение"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Vatican"
-msgstr "Ватикана"
+msgid "Test pages"
+msgstr "Тестови страници"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Uzbekistan"
-msgstr "Узбекистан"
+msgid ""
+"List of data to restore:\n"
+"\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Uruguay"
-msgstr "Уругвай"
+msgid "Checking %s"
+msgstr "Проверка на %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr "Малки Острови по крайбрежието на САЩ"
+msgid "TCP/Socket Printer Options"
+msgstr "TCP/Socket Опции на принтер"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Uganda"
-msgstr "Уганда"
+msgid "Card mem (DMA)"
+msgstr "Памет (DMA) на картата"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Ukraine"
-msgstr "Украйна"
+msgid "France"
+msgstr "Франция"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Tanzania"
-msgstr "Танзания"
+msgid "browse"
+msgstr "преглед"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Taiwan"
-msgstr "Тайван"
+msgid "Checking installed software..."
+msgstr "Проверка на инсталирания софтуер..."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tuvalu"
-msgstr "Тувалу"
+msgid "Remote printer name missing!"
+msgstr "Липсва име на отдалечен принтер !"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr "Тринидад и Тобаго"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "Искате ли да разрешите печат на принтерите в локалната мрежа?\n"
 
 #: ../../lang.pm:1
 #, c-format
 msgid "Turkey"
 msgstr "Турция"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Tonga"
-msgstr "Тонга"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Tunisia"
-msgstr "Тунис"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Turkmenistan"
-msgstr "Туркменистан"
-
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "East Timor"
-msgstr "Източен Тимор"
+msgid "Alcatel speedtouch usb"
+msgstr "Alcatel speedtouch USB"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Tokelau"
-msgstr "Токелау"
+msgid "Number of buttons"
+msgstr "Брой бутони"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Tajikistan"
-msgstr "Таджикистан"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Виетнамска \"числова редица\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Thailand"
-msgstr "Тайланд"
+msgid "Module"
+msgstr "Модул"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Togo"
-msgstr "Того"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
+"Като допълнение, опашките не създадени с тази програма или \"foomatic-"
+"configure\" не могат да бъдат прехвърляни."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "French Southern Territories"
-msgstr "Франция Южни Територии"
+msgid "Hardware"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Chad"
-msgstr "Чад"
+msgid "Ctrl and Alt keys simultaneously"
+msgstr "Ctrl и Alt клавиши едновременно"
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Turks and Caicos Islands"
-msgstr "Тюрк и Кайкос Острови"
+msgid "United States"
+msgstr "САЩ"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Swaziland"
-msgstr "Свазиленд"
+msgid "Default OS?"
+msgstr "ОС по подразбиране ?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Syria"
-msgstr "Сирия"
+msgid "Swiss (German layout)"
+msgstr "Швейцарска (немска наредба)"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "El Salvador"
-msgstr "Ел Салвадор"
+msgid "Configure all heads independently"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
-msgstr "Сао Томе и Принсипи"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Suriname"
-msgstr "Суринам"
+msgid "NTP Server"
+msgstr "NTP сървър"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Somalia"
-msgstr "Сомалия"
+msgid "Load/Save on floppy"
+msgstr "Зареди/Запази на дискета"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Senegal"
-msgstr "Сенегал"
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "San Marino"
-msgstr "Сан Марино"
+msgid "nice"
+msgstr "добър"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Sierra Leone"
-msgstr "Сиера Леоне"
+msgid "Leaving in %d seconds"
+msgstr "Позволено в %d секунди"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Slovakia"
-msgstr "Словакия"
+msgid "Please choose which serial port your modem is connected to."
+msgstr "Моля, изберете сериен порт към който свързан модемът ви."
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr "Свалбард и Ян Майен Острови"
+msgid "Country"
+msgstr "Страна"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Slovenia"
-msgstr "Словения"
+msgid "Property"
+msgstr "Собственост"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Saint Helena"
-msgstr "Света Елена"
+msgid "Ghostscript"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Singapore"
-msgstr "Сингапур"
+msgid "LAN Configuration"
+msgstr "Настройка на локална мрежа"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Sudan"
-msgstr "Судан"
+msgid "Ghana"
+msgstr "Гана"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Seychelles"
-msgstr "Сейшели"
+msgid "Path or Module required"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Solomon Islands"
-msgstr "Соломонови Острови"
+msgid "Advanced Options"
+msgstr "Допълнителни опции"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr "Саудитска Арабия"
+msgid "Coma bug"
+msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Rwanda"
-msgstr "Руанда"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
+"В този момент трябва да изберете кой дялове да бъдат използвани за "
+"инсталация\n"
+"на вашата Mandrake Linux система. Ако дяловете вече са определени, дали от\n"
+"предишна инсталация на GNU/Linux или от друг инструмент за разделяне, "
+"можете\n"
+"да използвате съществуващите далове. В противен случай трябва да определите\n"
+"дялове от твърдия диск.\n"
+"\n"
+"За да създадете дялове, трябва първо да изберете твърд диск. Можете да\n"
+"изберете диск за разделяне, като цъкнете на \"hda\" за първо IDE "
+"устройство,\n"
+"\"hdb\" за второто, \"sda\" за първо SCSI устройство и т.н..\n"
+"\n"
+"За да разделите избрания твър диск, можете да използвате следния опции:\n"
+"\n"
+" * \"Изчисти всичко\": тази опция изтрива всички дялове на избрания диск.\n"
+"\n"
+" * \"Автоматично създаване\": тази опция позволява автоматично да съзадете\n"
+"Ext2 и swap дялове в свободното пространство на твърдия ви диск.\n"
+"\n"
+" * \"Спаси таблицата с дялове\": ако таблицата с дялове е повредена, можете\n"
+"да се опитате да я възстановите с тази опция. Моля, бъдете внимателни и\n"
+"помнете, че може да не стане.\n"
+"\n"
+" * \"Върни\": използвайте тази опция, за да отмените промените.\n"
+"\n"
+" * \"Презареди\": можете да използвате тази опция, ако искате да върнете\n"
+"всички промени и да заредите първоначалната таблица с дялове.\n"
+"\n"
+" * \"Магьосник\": използвайте тази опция, ако искате да използвате "
+"магьосник,\n"
+"да раздели твърдия ви диск. Това се препоръчва, ако нямате достатъчно "
+"познания\n"
+"за разделянето.\n"
+"\n"
+" * \"Възстанови от дискета\": тази опция ще ви позволи да възстановите "
+"запазена\n"
+"преди това на дискета таблица с дялове.\n"
+"\n"
+" * \"Запази на дискета\": запазва таблицата с дялове на дискета. Полезно е "
+"при\n"
+"евентуално възстановяване на таблицата при необходимост. Силно се "
+"препоръчва\n"
+"да направите това.\n"
+"\n"
+" * \"Готово\": когато сте свършили с разделянето на твърдия си диск, това "
+"ще\n"
+"запише промените върху диска.\n"
+"\n"
+"Забележета: можете да достигнете всяка опция използвайки клавиатурата.\n"
+"Минавайте през дяловете използвайки [Tab} и стрелките нагоре/надолу.\n"
+"\n"
+"Когато е избран дял, можете да използвате:\n"
+"\n"
+" * Ctrl-c, за да създадете нов дял (ако е избран празен дял);\n"
+"\n"
+" * Ctrl-d, за да изтриете дял;\n"
+"\n"
+" * Ctrl-m, за да установите точка на монтиране.\n"
+"\n"
+"Ако инсталите на PPC машина, сигурно ще искате да създадете малък HFS\n"
+"\"bootstrap\" дял от поне 1 МБ, който ще бъде използват от boot loader-ът\n"
+"yaboot. Ако смятате да направите дяла по-голям, например 50 МБ, можете да "
+"го\n"
+"намерите за полезно място, където да съхранявате някое ядро или image на\n"
+"ramdisk в случай на извънредни ситуации."
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Russia"
-msgstr "Русия"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Romania"
-msgstr "Румъния"
+msgid "There was an error installing packages:"
+msgstr "Появи се грешка при инсталиране на пакетите:"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Reunion"
-msgstr "Риюниън"
+msgid "Lexmark inkjet configuration"
+msgstr "Настройка на Lexmark inkjet"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Qatar"
-msgstr "Катар"
+msgid "Undo"
+msgstr "Върни"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Palau"
-msgstr "Палау"
+msgid "Save partition table"
+msgstr "Запази таблицата с дяловете"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Paraguay"
-msgstr "Парагвай"
+msgid "Finnish"
+msgstr "Финландска"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Portugal"
-msgstr "Португалия"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "Запази избор на пакети"
+msgid "Macedonia"
+msgstr "Македония"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Puerto Rico"
-msgstr "Пуерто Рико"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
+msgstr ""
+"Споделянето на потребителски директории използва група \"fileshare\".\n"
+"Може да използвате userdrake,за да добавите потребител към тази група."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Pitcairn"
-msgstr "Питкеърн"
+msgid "Slovenian"
+msgstr "Словенска"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr "Свети Пиер и Микелон"
+msgid "Libya"
+msgstr "Либия"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Poland"
-msgstr "Полша"
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr ""
+"Настройващи скриптове, инсталиране на софтуер, стартиране на сървъри..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Pakistan"
-msgstr "Пакистан"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Philippines"
-msgstr "Филипини"
+msgid "Table"
+msgstr "Таблица"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Papua New Guinea"
-msgstr "Папуа Нова Гвинея"
+msgid "I don't know how to format %s in type %s"
+msgstr "не знам как да форматирам %s в тип %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "French Polynesia"
-msgstr "Френска Полинезия"
+msgid "Model"
+msgstr "Модел"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Peru"
-msgstr "Перу"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Panama"
-msgstr "Панама"
+msgid "Stop Server"
+msgstr "Спира сървър"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Oman"
-msgstr "Оман"
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "New Zealand"
-msgstr "Нова Зеландия"
+msgid "Modem"
+msgstr "Модем"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Niue"
-msgstr "Нию"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Nauru"
-msgstr "Науру"
+msgid "Tuvalu"
+msgstr "Тувалу"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Nepal"
-msgstr "Непал"
+msgid "Use auto detection"
+msgstr "Използвай автоматично засичане"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Nicaragua"
-msgstr "Никарагуа"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM добавя поддръжка на мишка в текстово-базираните Linux приложения като\n"
+"Midnight Commander. Също така позволява базираните на мишка конзоли\n"
+"режи-и-лепи операции, и включва поддръжка на изкачащи менюта на козолата."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Nigeria"
-msgstr "Нигерия"
+msgid "Started on boot"
+msgstr "Пуснат при стартиране"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Norfolk Island"
-msgstr "Норфолк Остров"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Niger"
-msgstr "Нигер"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New Caledonia"
-msgstr "Нова Каледония"
+msgid "Automatically find available printers on remote machines"
+msgstr "Автоматично открива наличните принтери наотдалечените машини"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Namibia"
-msgstr "Намибия"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Mozambique"
-msgstr "Мозамбик"
+msgid "East Timor"
+msgstr "Източен Тимор"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Malaysia"
-msgstr "Малайзия"
+msgid "Del profile..."
+msgstr "Изтрой профил ..."
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mexico"
-msgstr "Мексико"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Malawi"
-msgstr "Малави"
+msgid "Installing Foomatic..."
+msgstr "Инсталиране на Foomatic..."
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Maldives"
-msgstr "Малдиви"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "Моля излезте от сесията и използвайте Ctrl-Alt-BackSpace"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Mauritius"
-msgstr "Мавриций"
+msgid "detected"
+msgstr "засечена "
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Malta"
-msgstr "Малта"
+msgid "The network needs to be restarted. Do you want to restart it ?"
+msgstr "Мрежата се нуждае от престартиране. Искате ли да я престартирам?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Montserrat"
-msgstr "Монсерат"
+msgid "Package: "
+msgstr "Пакет: "
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mauritania"
-msgstr "Мавритания"
+msgid "Can't write /etc/sysconfig/bootsplash."
+msgstr "Не мога да пиша в /etc/sysconfig/bootsplash."
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Martinique"
-msgstr "Мартиника"
+msgid "SECURITY WARNING!"
+msgstr "ПРЕДУПРЕЖДЕНИЕ ЗА СИГУРНОСТ!"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Northern Mariana Islands"
-msgstr "Северни Марианови Острови"
+msgid "StarOffice"
+msgstr "StarOffice"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mongolia"
-msgstr "Монголия"
+msgid "No, I don't want autologin"
+msgstr "Не, не искам autologin"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Myanmar"
-msgstr "Мианмар"
+msgid "Windows Migration tool"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Mali"
-msgstr "Мали"
+msgid "All languages"
+msgstr "Избор на език"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Macedonia"
-msgstr "Македония"
+msgid "Removing %s"
+msgstr "Изтриване на %s"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Marshall Islands"
-msgstr "Маршалови Острови"
+msgid "Testing your connection..."
+msgstr "Изпробване на връзката..."
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Madagascar"
-msgstr "Мадагаскар"
+msgid "Cache size"
+msgstr "Размер на кеш"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Moldova"
-msgstr "Молдова"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
+msgstr ""
+"Паролата сега е включена, но използването като мрежов компютър не е "
+"препоръчително."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Monaco"
-msgstr "Монако"
+msgid "Start sector: "
+msgstr "Начален сектор: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Morocco"
-msgstr "Мароко"
+msgid "Congo (Brazzaville)"
+msgstr "Конго (Бразивил)"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Libya"
-msgstr "Либия"
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"Пакет %s трябва да бъде инсталиран\n"
+"Искате да го инсталирате?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Latvia"
-msgstr "Латвия"
+msgid "Seychelles"
+msgstr "Сейшели"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr "Люксембург"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuania"
-msgstr "Литва"
+msgid "Bad password on %s"
+msgstr "Лоша парола на %s"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lesotho"
-msgstr "Лесото"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
+"\n"
+"Има един неизвестен принтер включен към вашата систенма"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Liberia"
-msgstr "Либерия"
+msgid "Zambia"
+msgstr "Замбия"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Sri Lanka"
-msgstr "Шри Ланка"
+msgid "Security Administrator (login or email)"
+msgstr "Администратор по сигурността (логин или Ел.поща)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Liechtenstein"
-msgstr "Лихтенщайн"
+msgid "Sorry, we support only 2.4 kernels."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Saint Lucia"
-msgstr "Санта Лучия"
+msgid "Romanian (qwerty)"
+msgstr "Румънска (qwerty)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lebanon"
-msgstr "Ливан"
+msgid "Under Devel ... please wait."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Laos"
-msgstr "Лаос"
+msgid "Czech Republic"
+msgstr "Чешка Република"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Kazakhstan"
-msgstr "Казахстан"
+msgid "Egypt"
+msgstr "Египет"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Cayman Islands"
-msgstr "Кайманови Острови"
+msgid "Old configuration (isdn4net)"
+msgstr "Стара настройка (isdn4net)"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Kuwait"
-msgstr "Кувейт"
+msgid "Sound card"
+msgstr "Звукова карта"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Korea"
-msgstr "Корея"
+msgid "Import Fonts"
+msgstr "Импортирт на шрифтове"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Korea (North)"
-msgstr "Корея (Северна)"
+msgid ""
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
+msgstr ""
+"Имате един голям FAT дял\n"
+"(по принцип се ползват от Microsoft Dos/Windows).\n"
+"Предлагам първо да промените големината на този дял\n"
+"(щракнете върху него, а след това щракнете върху \"Промени големината\")"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr "Свети Китс и Невис"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Comoros"
-msgstr "Комори"
+msgid "Change partition type"
+msgstr "Промяна типа на дяла"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Kiribati"
-msgstr "Кирибати"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Cambodia"
-msgstr "Камбоджа"
+msgid "Network Options"
+msgstr "Мрежови опции"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Kyrgyzstan"
-msgstr "Киргизтан"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
+"Показва тема\n"
+"на конзола"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Kenya"
-msgstr "Кения"
+msgid "Statistics"
+msgstr "Статистики"
 
-#: ../../lang.pm:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Japan"
-msgstr "Япония"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Йордания"
+msgid "(on %s)"
+msgstr "(на %s)"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Jamaica"
-msgstr "Ямайка"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Iceland"
-msgstr "Исландия"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
+"Библиотека, която осигурява защита от aтаки с препълване на буфер и форматни "
+"стрингове."
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Iran"
-msgstr "Иран"
+msgid "average"
+msgstr "средно"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Iraq"
-msgstr "Ирак"
+msgid "New printer name"
+msgstr "Ново име на принтер"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "British Indian Ocean Territory"
-msgstr "Английски територии в Индийския океан"
+msgid "Equatorial Guinea"
+msgstr "Екваториална Гвинея"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "India"
-msgstr "Индия"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Позволява/Забранява автоматично влизане."
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Israel"
-msgstr "Израел"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "Лош backup-файл"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ireland"
-msgstr "Ирландия"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
+"За да отпечатате файл от командния ред (терминален прозорец), използвайте "
+"командата \"%s <file>\" или \"%s <file>\".\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Indonesia"
-msgstr "Индонезия"
+msgid "Currently, no alternative possibility is available"
+msgstr "За сега, няма налична алтернатива"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hungary"
-msgstr "Унгария"
+msgid "Romanian (qwertz)"
+msgstr "Румънска (qwertz)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Haiti"
-msgstr "Хаити"
+msgid "Write Config"
+msgstr "Записва настройка"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Croatia"
-msgstr "Хърватия"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
+"touted демона позволява таблица за IP рутиране автоматично обновявана чрез\n"
+"RIP протокола. Докато RIP е широко използвана за малки мрежи, за по-сложни\n"
+"протоколи за рутиране са нужни за сложни мрежи. "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Honduras"
-msgstr "Хондурас"
+msgid "Kiribati"
+msgstr "Кирибати"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Heard and McDonald Islands"
-msgstr "Хърд и МакДоналд Острови"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Позволява/Забранява отдалечено влизане на root."
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Hong Kong"
-msgstr "Хонг Конг"
+msgid "Browse"
+msgstr "Преглед"
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "China"
-msgstr "Китай"
+msgid "CDROM"
+msgstr "CDROM"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Guyana"
-msgstr "Гияна"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "Искате ли сега да опитате връзка към Интернет ?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Guinea-Bissau"
-msgstr "Гвинея-Бисау"
+msgid "Belgian"
+msgstr "Белгийска"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Guam"
-msgstr "Гуам"
+msgid "Do you have an ISA sound card?"
+msgstr "Имате ли ISA звукова карта?"
 
-#: ../../lang.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Guatemala"
-msgstr "Гватемала"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"Не беше намерен мрежов адаптер в системата ви.\n"
+"Не можете да настроите такъв вид връзка."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
-msgstr "Южни Сандвичеви Острови и Южна Джорджия"
+msgid "Windows"
+msgstr "Windows"
 
-#: ../../lang.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr "Екваториална Гвинея"
+msgid "Can't make screenshots before partitioning"
+msgstr "Не мога да направя моментна \"снимка\" преди разделянето на диска "
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Guadeloupe"
-msgstr "Гваделупа"
+msgid "Host Name"
+msgstr "Име на хост"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Guinea"
-msgstr "Гвинея"
+msgid "/File/Save _As"
+msgstr "/Файл/Запис _като"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gambia"
-msgstr "Гамбия"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Greenland"
-msgstr "Гренландия"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr "%s не е в базата данни на скенера, да конфигурирам ръчно?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Gibraltar"
-msgstr "Гибралтар"
+msgid "Delay before booting default image"
+msgstr "Забавяне преди стартирането на подразбиращият образ"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ghana"
-msgstr "Гана"
+msgid "Restrict command line options"
+msgstr "Ограничи опциите, задавани от командния ред"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "French Guiana"
-msgstr "Френска Гвиана"
+msgid "East Europe"
+msgstr "Източна Европа"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Georgia"
-msgstr "Грузия"
+msgid "Use free space"
+msgstr "Използвай свободното място"
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Grenada"
-msgstr "Гренада"
+msgid "use dhcp"
+msgstr "използвай DHCP"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "United Kingdom"
-msgstr "Англия"
+msgid "Mail alert"
+msgstr "Подредба на поща"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Gabon"
-msgstr "Габон"
+msgid "Internet configuration"
+msgstr "Настройка на Интернет"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Faroe Islands"
-msgstr "Острови Фаро"
+msgid "Uzbekistan"
+msgstr "Узбекистан"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Micronesia"
-msgstr "Микронезия"
+msgid "Detected %s"
+msgstr "Засечен %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr "Фолклендски Острови (Малвини)"
+msgid "/Autodetect _printers"
+msgstr "/Автоматично открива _принтери"
 
-#: ../../lang.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Fiji"
-msgstr "Фиджи"
+msgid "Finish"
+msgstr "Завърши"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Finland"
-msgstr "Финландия"
+msgid "Show automatically selected packages"
+msgstr "Покажи автоматично отбелязаните пакети"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Ethiopia"
-msgstr "Етиопия"
+msgid "CPU flags reported by the kernel"
+msgstr "Флагове на CPU съобщени от ядрото"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Spain"
-msgstr "Испания"
+msgid "Togo"
+msgstr "Того"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Eritrea"
-msgstr "Еритрея"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr "Нещо беше грешно! - Дали mkisofs  е инсталиран?"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Western Sahara"
-msgstr "Западна Сахара"
+msgid "16 MB"
+msgstr "16 МБ"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Egypt"
-msgstr "Египет"
+msgid "Please try again"
+msgstr "Моля, опитайте отново"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Estonia"
-msgstr "Естония"
+msgid "The model is correct"
+msgstr "Този модел е правилен"
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Ecuador"
-msgstr "Еквадор"
+msgid "FAT resizing failed: %s"
+msgstr "Неуспешно преразделяне на FAT: %s"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Algeria"
-msgstr "Алжир"
+msgid "Individual package selection"
+msgstr "Избиране на пакети един по един"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr "Доминиканска Република"
+msgid "This partition is not resizeable"
+msgstr "Големината на дяла не може да бъде променена"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Dominica"
-msgstr "Доминика"
+msgid "Location"
+msgstr "Местоположение"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Denmark"
-msgstr "Дания"
+msgid "USA (cable-hrc)"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Djibouti"
-msgstr "Джибути"
+msgid "Journalised FS"
+msgstr "Журнална FS"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cyprus"
-msgstr "Кипър"
+msgid "Guatemala"
+msgstr "Гватемала"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Christmas Island"
-msgstr "Коледни Острови"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "(на тази машина)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cape Verde"
-msgstr "Капо Верде"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "Буква на устройството под DOS: %s (просто предположение)\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cuba"
-msgstr "Куба"
+msgid "Select the files or directories and click on 'OK'"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Colombia"
-msgstr "Колумбия"
+msgid "Bahrain"
+msgstr "Бахрейн"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Cameroon"
-msgstr "Камерун"
+msgid "omit scsi modules"
+msgstr "без scsi модули"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Chile"
-msgstr "Чили"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr "фамилия cpu (напр: 6 за i686 клас)"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Cook Islands"
-msgstr "Острови Кук"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"Тъй като правите мрежова инсталация, мрежата ви вече е настроена.\n"
+"Цъкнете Ok, за да запазите настройката, или Отмяна, за да пренастоите "
+"Интернет и мрежовата си връзка.\n"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr "Кот д'ивоар"
+msgid "Keyboard layout: %s\n"
+msgstr "Тип клавиатура: %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Switzerland"
-msgstr "Швейцария"
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
+"Тук може да решите дали принтерите свързани към вашата машина ще бъдат "
+"достъпни от отдалечените машини и от кой."
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
-msgstr "Конго (Бразивил)"
+msgid "Maltese (US)"
+msgstr "Малтийска (US)"
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Central African Republic"
-msgstr "Централноафриканска Република"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Монтира и демонтира всякакви Network File System (NFS), SMB (LAN\n"
+"Manager/Windows), и NCP (NetWare)."
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Congo (Kinshasa)"
-msgstr "Конго (Киншаса)"
+msgid "Tvcard"
+msgstr "TV карта"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Cocos (Keeling) Islands"
-msgstr "Кокосови Острови"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Toggle between normal/expert mode"
+msgstr "Премини в Нормален режим"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Canada"
-msgstr "Канада"
+msgid "Size"
+msgstr "Големина"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Belize"
-msgstr "Белиз"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "ГБ"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Belarus"
-msgstr "Беларус"
+msgid "Greenland"
+msgstr "Гренландия"
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Botswana"
-msgstr "Ботсвана"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bouvet Island"
-msgstr "Остров Бувет"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bhutan"
-msgstr "Бутан"
+msgid ""
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
+msgstr ""
+"Установката на Споделянето на Интернет връзката е завършена.\n"
+"В момента е включена.\n"
+"\n"
+"Какво искате да направите ?"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Bahamas"
-msgstr "Бахами"
+msgid "Delete All NBIs"
+msgstr "Изтрива всички NBI"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Brazil"
-msgstr "Бразилия"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bolivia"
-msgstr "Боливия"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Brunei Darussalam"
-msgstr "Бруней"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "Коя настройка на XFree искате да имате ?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Bermuda"
-msgstr "Бермуда"
+msgid "More"
+msgstr "Още"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Benin"
-msgstr "Бенин"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
+"С това ниво на сигурност, ползването на системата като сървър става "
+"възможно.\n"
+"Сигурността сега е достатъчно голяма да се използва системата като\n"
+"сървър приемащ връзки от много клиенти. "
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Burundi"
-msgstr "Бурунди"
+msgid "Account Password"
+msgstr "Парола на акаунта"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Bahrain"
-msgstr "Бахрейн"
+msgid ""
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
+msgstr ""
+"Избахте да инсталирате bootloader на дял\n"
+"Това предполага,че вече имате bootloader на диска(например:  System "
+"Commander).\n"
+"\n"
+"От кой диск зареждате ?"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Bulgaria"
-msgstr "България"
+msgid "Tajik keyboard"
+msgstr "Таджикистанска клавиатура"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Burkina Faso"
-msgstr "Буркина Фасо"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
+msgstr ""
+"Можете да копирате настройките на принтера, които сте извършили за spoller %"
+"s на %s, текущия spooler. Цялата информация за настройките (име не принтер, "
+"описание, местоположение, вид на връзката и настройки по подразбиране) се "
+"презаписват, но работите не се прехвърлят.\n"
+"Не всички опашки могат да бъдат прехвърлени по следните причини:\n"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Bangladesh"
-msgstr "Бангладеш"
+msgid "Font List"
+msgstr "Списък шрифтове"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Barbados"
-msgstr "Барбадос"
+msgid ""
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
+msgstr ""
+"Може би се нуждаете да промените Open Firmware стартовото устройство,\n"
+" за да пуснете зареждащата програма. Ако не виждате подсказката и при\n"
+" рестартиране, задръжте Command-Option-O-F при рестартиране и въведете:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" След което напишете: shut-down\n"
+"При следващото рестартиране би трябвало да видете подсказката."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bosnia and Herzegovina"
-msgstr "Босна и Херцеговина"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
+"Изглежда имате старовремска или неизвестна\n"
+"машина, на която yaboot няма да проработи.\n"
+"Инсталацията ще продължи, но ще трябва\n"
+"да иползвате BootX, за да стартирате машината си"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Azerbaijan"
-msgstr "Азербайджан"
+msgid "Select file"
+msgstr "Изберете файл"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Aruba"
-msgstr "Аруба"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr "Избор на мрежа или хост за който локалният принтер ще бъде разрешен:"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Australia"
-msgstr "Австралия"
+msgid ""
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
+"Можете да използвате тази команда и в полето \"Команда за печат\" на "
+"печатните диалози в мноѓо приложения. Но тўк не поставяйте името на файла, "
+"защото то се подава от приложението.\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "American Samoa"
-msgstr "Американска Самоа"
-
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "Argentina"
-msgstr "Аржентина"
+msgid "Japan"
+msgstr "Япония"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Antarctica"
-msgstr "Антарктика"
+msgid "Print option list"
+msgstr "Списък с принтерни опции"
 
-#: ../../lang.pm:1
+#: ../../standalone/localedrake:1
 #, c-format
-msgid "Angola"
-msgstr "Ангола"
+msgid "The change is done, but to be effective you must logout"
+msgstr "Промените са запазени, но за да бъдат ефективни трябва да излезете"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Netherlands Antilles"
-msgstr "Холандски Антили"
+msgid "Search servers"
+msgstr "Търси сървъри"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "Армения"
+msgid "NCP queue name missing!"
+msgstr "Липсва име на NCP опашка !"
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Albania"
-msgstr "Албания"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Anguilla"
-msgstr "Ангила"
+msgid "Cd-Rom labeled \"%s\""
+msgstr "CD-ROM озаглавен \"%s\""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
-msgstr "Антигуа и Барбуда"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
+"Запазва и възстановята потока на системна ентропия за по-голямо качество\n"
+"на произволно генериране на числа."
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "United Arab Emirates"
-msgstr "Обединени Арабски Емирства"
+msgid ""
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
+msgstr ""
+"Неуспешна проверка на файлва система %s. Искате ли да оправите грешките? "
+"(бъдете внимателни, може да загубите данни)"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Andorra"
-msgstr "Андора"
+msgid "Turn your computer into a reliable server"
+msgstr "Превърнете вашата машина в надежден сървър"
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Afghanistan"
-msgstr "Афганистан"
+msgid " (driver %s)"
+msgstr " (драйвер %s)"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid ""
+"Loopback file(s):\n"
+"   %s\n"
+msgstr ""
+"Loopback файл(ове):\n"
+"   %s\n"
 
-#: ../../loopback.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "\"Омагьосан кръг\" от монтирания: %s\n"
+msgid "I don't know"
+msgstr "Не знам"
 
-#: ../../lvm.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "Първо премахни логичните дялово\n"
+msgid ", TCP/IP host \"%s\", port %s"
+msgstr ", TCP/IP хост \"%s\", порт %s"
 
-#: ../../modules.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"PCMCIA подръжката няма повече да същесвтува за ядро 2.2. Моля, използвайте "
-"2.4"
 
-#: ../../mouse.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "БУТНЕТЕ ТОПЧЕТО !"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
+"\n"
+"\n"
+"Вашата карта в момента използва %s\"%s\" драйвер (подразбиращ драйвер за "
+"картата ви е \"%s\")"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "To activate the mouse,"
-msgstr "За да активирате мишката си,"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "Изход от инсталационната програма"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "Моля, пробвайте мишката си"
+msgid " ("
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "Без мишка"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "Ниво на сигурност"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "none"
-msgstr "няма"
+msgid "Mongolian (cyrillic)"
+msgstr "Монголска (кирилица)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 бутона"
+msgid "Add a module"
+msgstr "Добави модула"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "2 buttons"
-msgstr "2 бутона"
+msgid "Profile to delete:"
+msgstr "Профил за изтриване:"
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "1 button"
-msgstr "1 бутон"
+msgid "Local measure"
+msgstr "Локално измерване"
 
 #: ../../mouse.pm:1
 #, c-format
 msgid "busmouse"
 msgstr "BUS мишка"
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington THinking Mouse"
+msgid "Account Login (user name)"
+msgstr "Име на акаунта (потебителско име)"
 
-#: ../../mouse.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (серийна, от стария тип C7)"
+msgid "Fdiv bug"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
+msgstr ""
+"drakfirewall конфигурация\n"
+"\n"
+"Убедете се, че вие имате конфигуриран Интернет/Интранет достъп с\n"
+"drakconnect преди да правите други неща по-нататък."
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Benin"
+msgstr "Бенин"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genuis NetMouse"
+msgid "Uruguay"
+msgstr "Уругвай"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Path selection"
+msgstr "Избор на път"
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "Name/IP address of host:"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Monitor: %s\n"
+msgstr "Монитор: %s\n"
 
-#: ../../mouse.pm:1
+#: ../../partition_table/raw.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
+msgstr ""
+"Нещо лошо става с устройството ви.\n"
+"Теста за целост на данните пропадна.\n"
+"Това значи, че писането на каквото и било по диска ще превръща\n"
+"произволно в боклук"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Printer host name or IP missing!"
+msgstr "Липсва име на хост на принтерa или IP!"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "Обикновенна 3-бутонна мишка"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "Моля, изберете пакетите, които искате да инсталирате."
 
-#: ../../mouse.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Обикновенна 2-бутонна мишка"
+msgid ""
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "serial"
-msgstr "серийна"
+msgid "Bangladesh"
+msgstr "Бангладеш"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft Explorer"
+msgid "Japan (cable)"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Generic"
-msgstr "Общ"
+msgid "Initial tests"
+msgstr "Начални тестове"
 
-#: ../../mouse.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Continue"
+msgstr "Нататък"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Custom Restore"
+msgstr "Клиентска"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Обикновенна PS2 мишка"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
+msgstr ""
+"\"%s\"ако намеря звукова карта,ще видите съобщение за това.\n"
+"Ако забележите,че намерената звукова карта не отговаря на истината,\n"
+"можете да цъкнете на бутона и да изберете друг драйвер."
 
-#: ../../mouse.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Script-based"
+msgstr "Базирана на скрипт"
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../install_any.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "Standard"
-msgstr "Стандартна"
+msgid "Error reading file %s"
+msgstr "Грешка при четенето на файла %s"
 
-#: ../../mouse.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Мишка на Sun"
+msgid "PLL setting:"
+msgstr "PLL настройки:"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "Превключване между нормално и сортиране по групи"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "Трябва да имате FAT дял монтиран в /boot/efi"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "Изчисти дървото"
+msgid " on "
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "Разшири дървото"
+msgid "The URL must begin with http:// or https://"
+msgstr "URL трябва да започва с http:// или https://"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Info"
-msgstr "Информация"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
+msgstr ""
+"Трябва директно да определите URI за достъп до принтера. URI трябва да "
+"изпълни или CUPS или Foomatic спецификациите. Отбележете, че не всички "
+"типове URI се поддрържат от spooler-ите."
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "Всичко правилно ли е ?"
+msgid "Other OS (SunOS...)"
+msgstr "Друга ОС (SunOS...)"
 
-#: ../../my_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Install/Upgrade"
+msgstr "Инсталирай/Обнови"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Error writing to file %s"
-msgstr "Грешка при запис във файла %s"
+msgid "%d packages"
+msgstr "%d пакета"
 
-#: ../../partition_table.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Bad backup file"
-msgstr "Лош backup-файл"
+msgid ""
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default             : save default directories.\n"
+"--debug               : show all debug messages.\n"
+"--show-conf           : list of files or directories to backup.\n"
+"--config-info         : explain configuration file options (for non-X "
+"users).\n"
+"--daemon              : use daemon configuration. \n"
+"--help                : show this message.\n"
+"--version             : show version number.\n"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "Възстановяването от файла %s не успя: %s"
+msgid "Domain Authentication Required"
+msgstr "Изисква Идентификация за Домейн"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+"\n"
+"\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
-"Имате празнина в таблицата с дяловете, но не мога да я използвам.\n"
-"Единственият начин е да преместите главните си дялове, за да имате празно "
-"място след extended-дяловете"
+"\n"
+"\n"
+" Благодарности:\n"
+"\t- LTSP Проект http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 
-#: ../../partition_table.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Разширени дялове не се поддържат на тази платформа"
+msgid "Costa Rica"
+msgstr "Коста Рика"
 
-#: ../../partition_table.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "монтирането не успя: "
+msgid "Use libsafe for servers"
+msgstr "Използвайте libsafe за сървъри"
 
-#: ../../pkgs.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "maybe"
-msgstr "става"
+msgid "Icelandic"
+msgstr "Исландска"
 
-#: ../../pkgs.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "nice"
-msgstr "добър"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
+"\n"
+"Използване: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
 
-#: ../../pkgs.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "very nice"
-msgstr "много добър"
+msgid "Please relog into %s to activate the changes"
+msgstr "Моля влезте отново в %s, за да активирате промените"
 
-#: ../../pkgs.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "important"
-msgstr "важен"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "must have"
-msgstr "нужен"
+msgid "Lilo/grub mode"
+msgstr "Режим на Lilo/grub"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "Няма достатъчно дялове за RAID ниво %d\n"
+msgid "Output"
+msgstr "Резултат"
 
-#: ../../raid.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid пропадна"
+msgid "Circular mounts %s\n"
+msgstr "\"Омагьосан кръг\" от монтирания: %s\n"
 
-#: ../../raid.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid пропадна (може би raidtools липсват ?)"
+msgid "Martinique"
+msgstr "Мартиника"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "Не мога да прибавя дял към _форматиран_ RAID md%d"
+msgid "HardDrive / NFS"
+msgstr "Твърд диск / NFS"
 
-#: ../../services.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Stop"
-msgstr "Стоп"
+msgid "a number"
+msgstr "номер"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Start"
-msgstr "Старт"
+msgid "Swedish"
+msgstr "Шведска"
 
-#: ../../services.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "On boot"
-msgstr "При зареждане"
+msgid "Which %s driver should I try?"
+msgstr "Кой %s драйвер да пробвам ?"
 
-#: ../../services.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
 msgid ""
-"No additional information\n"
-"about this service, sorry."
+"You will receive an alert if one of the selected services is no longer "
+"running"
 msgstr ""
-"Няма допълнителна информация\n"
-"за тази услуга, съжелявам."
+"Вие ще получите тревога ако едно от изброените обслужвания не се изпълнява "
+"повече"
 
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Services and deamons"
-msgstr "Услуиги и демони"
+msgid "Filesystem types:"
+msgstr "Видове файлова система:"
 
-#: ../../services.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "stopped"
-msgstr "спряна"
+msgid ", multi-function device on HP JetDirect"
+msgstr ", многофункционално устройство на HP JetDirect"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "running"
-msgstr "стартиране"
+msgid "Northern Mariana Islands"
+msgstr "Северни Марианови Острови"
 
-#: ../../services.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "Избира услугите, които трябва да се пуснат при пускане на машината"
+msgid "none"
+msgstr "няма"
 
-#: ../../services.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Database Server"
-msgstr "Сървър Бази-данни"
+msgid "user :"
+msgstr "Потребител:"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Remote Administration"
-msgstr "Отдалечена администрация"
+msgid "Please enter your password"
+msgstr "Моля, въведете вашата парола"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "File sharing"
-msgstr "Поделяне на файлове"
+msgid ""
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
+msgstr ""
+"Име на създавания профил (новият профил се създава като копие на текущия):"
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Internet"
-msgstr "Интернет"
+msgid "Floppy"
+msgstr "Флопи"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "Моля, цъкнете на носителя"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Printing"
-msgstr "Печатане"
+msgid "Ghostscript referencing"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "Стартира X Font Server (това е задължително, за да тръгне XFree)."
+msgid "Bootloader"
+msgstr "Bootloader"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Load the drivers for your usb devices."
-msgstr "Зареждане драйвери за вашите USB устройства."
+msgid "Move"
+msgstr "Премести"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
-msgstr ""
-"Syslog е програма която много демони използват да запазват съобщения в\n"
-"различни системни файлове (логове). Добре е постоянно да я имате работеща."
+msgid "Bootloader to use"
+msgstr "Използвана зареждащата програма"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Launch the sound system on your machine"
-msgstr "Пуснкане звуковата система на машината ви"
+msgid "SMB server host"
+msgstr "Хост на SMB сървър"
 
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "NIS сървър"
+
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
 msgstr ""
-"rwho протокола позволява на отдалечени потребители да се сдобият със списък\n"
-"на всички потребители влезли на машина с работещ rwho демон (подобен на "
-"finger)."
+"\n"
+"Внимание\n"
+"\n"
+"Моля, прочетете условията по-долу. Ако не сте съгласни с някое от тях,\n"
+"не можете да продължите инсталацията на следващия CD носител. Натиснете\n"
+"'Откажи', за да продължите инсталацията без тези носители.\n"
+"\n"
+"\n"
+"Някои компоненти съдържащи се в следващия CD носител не са разпространяват\n"
+"под GPL Лиценза или подобен такъв. Всеки такъв компонент е под условията\n"
+"и положенията на специфичния му лиценз. Моля, прочетете внимателно и изцяло\n"
+"тези специфични лицензи преди да използвате или разпространявате "
+"споменатите\n"
+"компоненти.\n"
+"Такива лицензи по принцип предотвратява преноса, копирането (освен с цел\n"
+"съхранение), разпространяването, обратния инженеринг, деасемблирането\n"
+"декомпилацията или модификацията на компонентите.\n"
+"Всяко нарушаване на спогодбата незабавно преустановява правата ви по\n"
+"специфичния лиценз. Освен ако специфичния лиценз ви дава такива права,\n"
+"обикновено не можете да инсталирате програмите на повече от една система\n"
+"или да ги пригаждате за използване в мрежа. Ако не сте сигурни, моля\n"
+"свържете се с дистрибуция или редактора на компонена.\n"
+"Прехвърлянето на трети лица или копирането на всяка компонента, включително\n"
+"на документацията, обикновено са забранени.\n"
+"\n"
+"\n"
+"Всички права на компонентите от следващия CD носител принадлежат на\n"
+"съответните им автори и са защитени като интелектуална собственост от\n"
+"законите за авторски права приложими за софтуерните програми.\n"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
-"rusers протокола позволява на мрежовите потребители да проверяват кой е\n"
-"влязъл на друга отговарящата машина."
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Премахва този принтер от Star Office/OpenOffice.org/GIMP"
 
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"rstat протокола позволява на мрежовите потребители да извличат\n"
-"параметрите на възможностите за всяка машина на мрежата."
+"Linux Virtual Server се използва за изграждане на високопроизводителен\n"
+"и добре достъпен сървър."
 
-#: ../../services.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
-"touted демона позволява таблица за IP рутиране автоматично обновявана чрез\n"
-"RIP протокола. Докато RIP е широко използвана за малки мрежи, за по-сложни\n"
-"протоколи за рутиране са нужни за сложни мрежи. "
+msgid "4 billion colors (32 bits)"
+msgstr "4 милиарда цвята (32 бита)"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
-msgstr ""
-"Свържи чисти драйвери с блокови устройства (като дялове\n"
-"на твърдия диск), за употребята от приложения като Oracle"
+#: ../../lang.pm:1
+#, c-format
+msgid "Micronesia"
+msgstr "Микронезия"
 
-#: ../../services.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
-msgstr ""
-"Запазва и възстановята потока на системна ентропия за по-голямо качество\n"
-"на произволно генериране на числа."
+msgid "License"
+msgstr "Лиценз"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
+msgid "This may take a moment to generate the keys."
 msgstr ""
-"Postfix е Main Transport Agent (MTA), който е програма която пренася\n"
-"поща от машина на машина."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
-msgstr ""
-"portmapper се справя с RPC връзки, които се използват от протоколи като\n"
-"NFS и NIS. portmap сървъра трябва да е пуснат на машини, които работят като\n"
-"сървър за протоколи, които се нуждаят да използват RPC механизъм."
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr "Автоматично откриване на принтер (Локален, TCP/Socket, и SMB прентери)"
 
-#: ../../services.pm:1
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Sagem (using pppoa) usb"
+msgstr "Sagem (използва pppoa) usb"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
 msgstr ""
-"PCMCIA поддържката обикновенно поддържа неща като ethernet и модеми в\n"
-"laptop-и. Това няма да се стартира преди да бъде настроен, така че е\n"
-"по-добре да я имате инсталирана на машини, които не се нуждаят от нея."
+"Появи се грешка - не са открити валидни устройства, върху които да бъдат "
+"създадени нови файлови системи. Моля проверете твърдия си диск си за "
+"причината за този проблем"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr "Поддръжка на OKI 4w и съвместими win-принтери."
+msgid "Starting the printing system at boot time"
+msgstr "Стартиране на принтерната система при стартиране"
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
-"Автоматично включване на numlock клавиша под конзола и\n"
-"XFree при стартитане."
+msgid "Do you want to start the connection at boot?"
+msgstr "Искате ли да стартирате връзката си при зареждане ?"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
-msgstr ""
-"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
-"Тази услуга осигурява функционалността на заключването на NFS файловете."
+msgid "Processor ID"
+msgstr "Процесор ID"
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
-msgstr ""
-"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
-"Тази услуга осигурява функционалността на NFS сървъра, който се настройва\n"
-"чрез файла /etc/exports."
+msgid "Sound trouble shooting"
+msgstr "Затруднения при звук"
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Активира/деактивира всички мрежови интерфейси, настроени да се пускат\n"
-"при стартиране на машината."
+msgid "Polish (qwerty layout)"
+msgstr "Полска (QWERTY наредба)"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-msgstr ""
-"Монтира и демонтира всякакви Network File System (NFS), SMB (LAN\n"
-"Manager/Windows), и NCP (NetWare)."
+msgid "activate now"
+msgstr "активирай сега"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+"\n"
+"Drakbackup activities via CD:\n"
+"\n"
 msgstr ""
-"named (BIND) е Domain Name Server (DNS), който се използва да превърне\n"
-"името на хоста до IP адрес."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
-"Linux Virtual Server се използва за изграждане на високопроизводителен\n"
-"и добре достъпен сървър."
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
-msgstr ""
-"lpd е демона за печат необходим на lpr да работи нормално. Той просто е\n"
-"сървър, който определя работите за печат на принтер(а/ите)."
+msgid "Host \"%s\", port %s"
+msgstr "Хост \"%s\", порт %s"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
-msgstr ""
-"Linuxconf понякога урежда извършването на различни задачи\n"
-"при стартиране за поддръжка на системната настройка."
+msgid "This partition can't be used for loopback"
+msgstr "Този дял не може да бъде използван за loopback"
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
-msgstr "Автоматично засичане и настройка на хардуера при стартиране."
+msgid "File already exists. Use it?"
+msgstr "Файлът вече съшествува. Да го използвам ли ?"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
-"Автоматично регенериране на header-ите на адрото, в /boot за\n"
-"/usr/include/linux/{autoconf,version}.h"
+msgid "received: "
+msgstr "получено: "
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
-msgstr ""
-"Този пакет зарежда маркираната клавиатурна наредба в /etc/sysconfig/"
-"keyboard.\n"
-"Тя може да бъде избрана с инструмента kbdconfig. Трябва да оставите "
-"товавключено за повечето машини."
+msgid "Right Alt key"
+msgstr "Десен Alt клавиш"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
-msgstr ""
-"Включи филтрирането на пакети за Linux ядра серия 2.2, за\n"
-"настрока на защитната стена, s cel защитава на машината ви от\n"
-"мрежови атаки."
+msgid "the list of alternative drivers for this sound card"
+msgstr "списък на алтернативни драйвери за тази карта"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
-msgstr ""
-"Internet superserver daemon (често наричан inetd) пуска различни други\n"
-"Интернет услуги. Той отговаря за пускането на много услуги от рода на\n"
-"telnet, ftp, rsh и rlogin. Изключването на inetd изключва всички услуги,\n"
-"за които отговаря."
+msgid "Gateway"
+msgstr "Gateway"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "Поделяне на файлове"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr ""
-"Apache е World Wide Web (WWW) сървър. Той служи да обработва на HTML "
-"файлове\n"
-"и CGI."
+msgid "Tonga"
+msgstr "Тонга"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
-"HardDrake прави проби на хардуера, и евентуално настройва\n"
-"нов/променен хардуер."
+msgid "Tunisia"
+msgstr "Тунис"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM добавя поддръжка на мишка в текстово-базираните Linux приложения като\n"
-"Midnight Commander. Също така позволява базираните на мишка конзоли\n"
-"режи-и-лепи операции, и включва поддръжка на изкачащи менюта на козолата."
+msgid "Profile: "
+msgstr "Профил: "
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+"Click on a device in the left tree in order to display its information here."
 msgstr ""
-"cron е стандартна UNIX програма, която периодично пуска определени програми\n"
-"по разписание. vixie cron добавя множество преимущества над тези на простия\n"
-"UNIX cron, включително по-добра сигурност и мощни настройващи опции."
 
-#: ../../services.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "XawTV isn't installed!"
 msgstr ""
-"Пуска команди по разписание във време определено от командата at и пуска\n"
-"набор от други, когато натовареността спадне достатъчно."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"Create/Transfer\n"
+"backup keys for SSH"
 msgstr ""
-"apmd се използва за наблюдение на батерията и записвайки статуса чрез\n"
-"syslog. Може също да се използва за спиране на машината, когато батерията е "
-"изтощена."
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacrton - периодично изпълняване на команди по разписание."
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr "Не включва критични файлове (passwd, group, fstab)"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr "Пусни ALSA (Advanced Linux Sound Architecture) звуковата система"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing packages..."
-msgstr "Инсталиране на пакети ..."
+msgid "This label is already used"
+msgstr "Този етикет вече се използва"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-msgstr ""
+"Welcome to the Printer Setup Wizard\n"
 "\n"
-"Използване: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
-
-#: ../../standalone.pm:1
-#, c-format
-msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "След форматиране на дяла %s, всички данни върху него ще бъдат загубени"
 
-#: ../../standalone.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
-msgstr ""
+msgid "Connection Time: "
+msgstr "Време на връзката: "
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
-msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "select perm file to see/edit"
+msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
+"Моля, сложете Инсталационния CD-ROM в устройството и натиснете Ok, когато "
+"сте готови.\n"
+"Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-"
+"ROM."
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Use group id for execution"
+msgstr "Използва id на група при изпълнение"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "[keyboard]"
-msgstr "[клавиатура]"
+msgid "Choose the default user:"
+msgstr "Изберете подразбиращ се потребител :"
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
-msgstr ""
+msgid "Gabon"
+msgstr "Габон"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"\n"
+"Отдалечените на CUPS сървър принтери не трябва да настройвате\n"
+"тук; тези принтери ще бъдат засечени автоматично."
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
 msgstr ""
+"Mandrake Linux може да подържа много езици. Изберете\n"
+"езиците които искате ад инсталирате. Те ще бъдат налични след\n"
+"като завърши инсталацията и вие престартирате системата."
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default             : save default directories.\n"
-"--debug               : show all debug messages.\n"
-"--show-conf           : list of files or directories to backup.\n"
-"--config-info         : explain configuration file options (for non-X "
-"users).\n"
-"--daemon              : use daemon configuration. \n"
-"--help                : show this message.\n"
-"--version             : show version number.\n"
-msgstr ""
+msgid "Domain"
+msgstr "Домейн"
 
-#: ../../standalone.pm:1
+#: ../../any.pm:1
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "Точен размер на RAM-паметта, ако е необходимо (намерени %d MB)"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Exit install"
-msgstr "Изход от инсталационната програма"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Install updates"
-msgstr "Инсталиране на системата"
+msgid "Provider dns 2 (optional)"
+msgstr "2-ри DNS на доставчика (по желание)"
 
-#: ../../steps.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Configure services"
-msgstr "Настройка на услугите"
+msgid "Boot device"
+msgstr "Стартиращо устройство"
 
-#: ../../steps.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "Настройка на Х"
+msgid "Which partition do you want to resize?"
+msgstr "Кой дял желаете да промените?"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "Инсталиране на bootloader"
+msgid "United States Minor Outlying Islands"
+msgstr "Малки Острови по крайбрежието на САЩ"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configure networking"
-msgstr "Настойка на мрежата"
+msgid "A tool to monitor your logs"
+msgstr "Инструмент за преглеждане на вашите лог файлове"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add a user"
-msgstr "Добавяне на потребител"
+msgid "Djibouti"
+msgstr "Джибути"
 
-#: ../../steps.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Root password"
-msgstr "Въведете парола за root"
+msgid "detected on port %s"
+msgstr "засечен на порт %s"
 
-#: ../../steps.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Install system"
-msgstr "Инсталиране на системата"
+msgid "LPD"
+msgstr "LPD"
 
-#: ../../steps.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "Пакети за инсталиране"
+msgid "Graphics card: %s\n"
+msgstr "Графична карта: %s\n"
 
-#: ../../steps.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Format partitions"
-msgstr "Форматиране на дялове"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Partitioning"
-msgstr "Разделяне на дялове"
+msgid "Please check if you are using a DVDRAM device"
+msgstr "Моля, проверете дали използвате DVDRAM устройство"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Splash selection"
+msgstr "Запази избор на пакети"
+
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "Избор на клавиатура"
+msgid "Extended partition not supported on this platform"
+msgstr "Разширени дялове не се поддържат на тази платформа"
 
-#: ../../steps.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Select installation class"
-msgstr "Избор на клас инсталация"
+msgid "ISDN Configuration"
+msgstr "Настройка на IDSN"
 
-#: ../../steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "Засичане на дисковете"
+msgid "high"
+msgstr "високо"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Configure mouse"
-msgstr "Настройка на мишка"
+msgid "Internet Connection Sharing"
+msgstr "Споделяне на връзката с Интернет"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "License"
-msgstr "Лиценз"
+msgid "Choose file"
+msgstr "Изберете файл"
 
-#: ../../steps.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Language"
-msgstr "Избор на език"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
+msgstr ""
+"Внимание ! Открита е настройка на Защитна Стена. Може да се наложи някаква "
+"ръчна поправка след инсталацията."
 
-#: ../../ugtk2.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "Печатане на принтер \"%s\""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "utopia 25"
-msgstr "utopia 25"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
+"Искате ли да разрешите печат на принтерите споменати горе или на принтерите "
+"в локалната мрежа?\n"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "Избор модел на принтера"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Обикновенна PS2 мишка"
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "логдрейк"
+msgid "Removing old printer \"%s\"..."
+msgstr "Изтриване на стар принтер \"%s\"..."
 
-#: ../../ugtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgid "Select a device !"
+msgstr "Изберете устройство !"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "Изтриване на опашката"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Xpmac (installation display driver)"
-msgstr "Xpmac (инсталация графичен драйвер)"
+msgid "French Southern Territories"
+msgstr "Франция Южни Територии"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-msgstr ""
-"Картата ви може да има поддръжка на хардуерно 3D ускорение с XFree %s.\n"
-"ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И КОМПЮТЪРЪТ ВИ МОЖЕ ДА "
-"ЗАБИЕ."
+msgid "the vendor name of the processor"
+msgstr "името на производителя на процесора"
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s с ЕКСПЕРИМЕНТАЛНO хардуерно 3D ускорение"
+msgid "All data on this partition should be backed-up"
+msgstr "Всички данни на този дял трябва да бъдат архивирани"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Картата ви може да има поддръжка на хардуерно 3D ускорение в XFree %s."
+msgid "Installing package %s"
+msgstr "Инсталиране на пакета %s"
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s с хардуерно 3D ускорение"
+msgid "Checking device and configuring HPOJ..."
+msgstr "Проверка на устройство и конфигурация за HPOJ..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
-"Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с XFree %"
-"s,\n"
-"ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И МОЖЕ ДА ЗАБИЕ КОМПЮТЪРА "
-"ВИ.\n"
-"Картата ви се поддържа от XFree %s, който може да има по-добра поддръжка на "
-"2D."
+"Ако искате още дялове, моля изтрийте един, за да можете да създадете един "
+"разширен дял"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
 msgstr ""
-"Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с Xfree %"
-"s.\n"
-"Картата ви се поддържа от XFree %s, който може да има по-добра поддръжка на "
-"2D."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
+msgid "Choose packages to install"
+msgstr "Пакети за инсталиране"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "Настройка само на карта \"%s\"(%s)"
+msgid ""
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Използвай разширението Xinerama"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "ВСИЧКИ съществуващи дялове и даннитe върху тях на %s ще бъдат загубени"
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Configure all heads independently"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
 msgstr ""
+"Системата ви няма достатъчно място за инсталация или обновяване (%d > %d)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "Коя настройка на XFree искате да имате ?"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
+msgstr ""
+"Всеки принтер се нуждае от име (например \"printer\"). Полетата Описание и "
+"Местоположе не трябва да бъдат попълвани. Има коментари за потребителите."
 
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "Настройка на XFree"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "Изберете капацитет на паметта на графичната си карта"
+msgid "Bhutan"
+msgstr "Бутан"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
+msgid "Network interface"
+msgstr "Мрежов интерфейс"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr ""
+msgid "Reading printer data..."
+msgstr "Четене на данни от принтера ..."
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Choose an X server"
-msgstr "Изберете X сървър"
+msgid "Korean keyboard"
+msgstr "Корейска клавиатура"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "X server"
-msgstr "X сървър"
+msgid "Not connected"
+msgstr "Не свързан"
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 МБ или повече"
+msgid "Greek"
+msgstr "Гръцка"
 
-#: ../../Xconfig/card.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 МБ"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 МБ"
+msgid "Saint Kitts and Nevis"
+msgstr "Свети Китс и Невис"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "8 MB"
-msgstr "8 МБ"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s\\@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "4 MB"
-msgstr "4 МБ"
+msgid "Enable OF Boot?"
+msgstr "Стартиране от OF ?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 МБ"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "Не можете да използвате JFS за дял по-малък от 16 МБ"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "1 MB"
-msgstr "1 МБ"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "Вертикално опресняване на монитора: %s\n"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 КБ"
+msgid "path"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 КБ"
+msgid "Mount point"
+msgstr "Място на монтиране"
 
-#: ../../Xconfig/main.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
-"\n"
-"%s"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"Да запазя ли промените ?\n"
-"Текущата настройка е:\n"
-"\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Options"
-msgstr "Опции"
+"Появи се грешка:\n"
+"%s\n"
+"Опитайте да промените някой параметри"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Test"
-msgstr "Тест"
+msgid "Restore system"
+msgstr "Система за възстановяване"
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Resolution"
-msgstr "Разделителна способност"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Monitor"
-msgstr "Монитор"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphic Card"
-msgstr "Графична карта"
+msgid "Another one"
+msgstr "Друго"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "Вертикална скорост на възстановяване"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "Хоризонтална скорост на възстановяване"
+msgid "Colombia"
+msgstr "Колумбия"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"Current configuration of `%s':\n"
 "\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
 msgstr ""
-"Двата критични параметъра са вертикалната скорост на възстановяване, която "
-"отразява скоростта, \n"
-"с която целият екран се възстановява, и най-важното - хоризонталната\n"
-"синхронизационна скорост, която отразява скоростта, с която се изписват "
-"хоризонталните линии.\n"
-"\n"
-"МНОГО Е ВАЖНО да изберете такава синхронизационната скорост, която да "
-"отговаря на възможностите на Вашия монитор - в противен случай можете да "
-"повредите монитора си.\n"
-" Ако имате някакви съмнения, изберете консервативна настройка."
-
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr "Проба за Plug & Play е неуспешна. Моля, изберете правилен монитор"
-
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Vendor"
-msgstr "Производител"
 
 #: ../../Xconfig/monitor.pm:1
 #, c-format
 msgid "Plug'n Play"
 msgstr "Plug & Play"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "Изберете монитор"
+msgid "Reunion"
+msgstr "Риюниън"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "Графична карта: %s"
+msgid "Details"
+msgstr "Подробности"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "Изберете разделителна способност и дълбочина на цветовете"
+msgid "For security reasons, it will be disconnected now."
+msgstr "За ваша сигурност, сега тя ще бъдете отвързана."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Resolutions"
-msgstr "Разделителна способност"
+msgid "Synchronization tool"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 милиарда цвята (32 бита)"
+msgid "Checking your system..."
+msgstr "Проверка на вашата система..."
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "16 милиона цвята (24 бита)"
+msgid "Print"
+msgstr "Печат"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "65 хиляди цвята (16 бита)"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "32 хиляди цвята (15 бита)"
+msgid "Mongolia"
+msgstr "Монголия"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 цвята (8 бита)"
+msgid "Mounted\n"
+msgstr "Монтиран\n"
 
-#: ../../Xconfig/test.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Is this the correct setting?"
-msgstr "Всичко правилно ли е ?"
+msgid "Graphical Interface"
+msgstr "Графичен интерфейс"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Leaving in %d seconds"
-msgstr "Позволено в %d секунди"
+msgid "Restore Users"
+msgstr "Възстанови Потребители"
 
-#: ../../Xconfig/test.pm:1
-#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
-"Появи се грешка:\n"
-"%s\n"
-"Опитайте да промените някой параметри"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "Ключ за криптиране"
 
-#: ../../Xconfig/test.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
 msgstr ""
-"Внимание: тестването на тази графична карта може да замрази компютъра ви"
+"portmapper се справя с RPC връзки, които се използват от протоколи като\n"
+"NFS и NIS. portmap сървъра трябва да е пуснат на машини, които работят като\n"
+"сървър за протоколи, които се нуждаят да използват RPC механизъм."
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "Искате ли да тествате настройките?"
+msgid "Detected hardware"
+msgstr "Открит хардуер"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "Проверка на настройката"
+msgid "Mauritius"
+msgstr "Мавриций"
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "What norm is your TV using?"
-msgstr "Какъв е типът на използваният TV ?"
+msgid "Myanmar (Burmese)"
+msgstr "Майнмар (бирманска)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
-"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
-msgstr ""
+msgid "Enabling swap partition %s"
+msgstr "Разрешава swap дял %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
 msgstr ""
-"Kомпютъра ви може автоматично, да влезе в X при стартиране.\n"
-"Искате ли X да се стартира, когато рестартирате системата?"
+"Няма FAT дялове за използване като loopback (или няма достатъчно място на "
+"диска)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Graphical interface at startup"
-msgstr "X при стартиране на системата"
+msgid "Armenian (old)"
+msgstr "Арменска (стара)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "XFree86 драйвер: %s\n"
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
+"Принтер с име \"%s\" вече съществува в %s.\n"
+"Цъкнете \"Прехвърли\", за да го презапишете.\n"
+"Можете също така да напишете ново име или да пропуснте принтера."
 
-#: ../../Xconfig/various.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "XFree86 сървър: %s\n"
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr "намерете решения на вашите проблеми с подръжката на MandrakeSoft"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "Разделителна способност: %s\n"
+msgid ", host \"%s\", port %s"
+msgstr ", хост \"%s\", порт %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "Дълбочина на цвета: %s\n"
+msgid "Monaco"
+msgstr "Монако"
 
-#: ../../Xconfig/various.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "Графична памет: %s kB\n"
+msgid "%s formatting of %s failed"
+msgstr "%s форматиране от %s провалено"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "Графична карта: %s\n"
+msgid "Partitioning failed: %s"
+msgstr "Неуспешно разделяне на: %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "Вертикално опресняване на монитора: %s\n"
+msgid "Canada (cable)"
+msgstr "Канада (кабел)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "Хоризонтална синхронизация на монитора: %s\n"
+msgid "Upgrade"
+msgstr "Обновяване"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "Монитор: %s\n"
+msgid "Workstation"
+msgstr "Работна станция"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "Устройство на мишката: %s\n"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"Инсталирам пакет %s\n"
+"%d%%"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "Тип мишка: %s\n"
+msgid "Kyrgyzstan"
+msgstr "Киргизтан"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "Тип клавиатура: %s\n"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "С базова документация (препоръчва се!)"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Options: %s"
-msgstr "Опции: %s"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacrton - периодично изпълняване на команди по разписание."
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Mount point: "
-msgstr "Място на монтиране: "
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"Трябва да имате root-дял.\n"
+"Затова създайте дял (или цъкнете на съществуващ).\n"
+"Тогава изберете действие ``Място на монтиране'' и го сложете `/'"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Server: "
-msgstr "Сървър: "
+msgid "Proxy should be http://..."
+msgstr "Proxy-сървъра трябва да е http://..."
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr "URL трябва да започва с http:// или https://"
+msgid "South Africa"
+msgstr "Южна Африка"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "Моля въведете WebDAV сървър URL"
+msgid "Western Sahara"
+msgstr "Западна Сахара"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Mount point"
-msgstr "Място на монтиране"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Server"
-msgstr "Сървър"
+msgid "Modify printer configuration"
+msgstr "Поправи настройките на принтер"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mount"
-msgstr "Монтирай"
+msgid "Choose a partition"
+msgstr "Изберете дял"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Unmount"
-msgstr "Демонтирай"
+msgid "Edit current rule"
+msgstr "Редактира текущото правило"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "New"
-msgstr "Нов"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/dav.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Use ``%s'' instead"
-msgstr "Вместо това използвайте ``%s''"
+msgid "Please test the mouse"
+msgstr "Моля, пробвайте мишката си"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Type"
-msgstr "Вид"
+msgid "Other Media"
+msgstr "Друг носител"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "Първо използвайте 'Демонтиране'"
+msgid "Backup system files"
+msgstr "Резервно копие на системни файлове"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Delete"
-msgstr "Изтрий"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Create"
-msgstr "Създай"
+msgid "Sector"
+msgstr "Сектор"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Filesystem types:"
-msgstr "Видове файлова система:"
+msgid "Qatar"
+msgstr "Катар"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Empty"
-msgstr "Празен"
+msgid "LDAP Base dn"
+msgstr "LDAP Базов dn"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Windows"
-msgstr "Windows"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr ""
+"Не можете да оставите пакета немаркиран, защото нямате място да го "
+"инсталирате"
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "HFS"
-msgstr "HFS"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "generate auto-install floppy"
+msgstr "Подготви дискета за автоматична инсталация"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "Dialing mode"
+msgstr "Режим на набиране"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Swap"
-msgstr "Swap"
+msgid "File sharing"
+msgstr "Поделяне на файлове"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Journalised FS"
-msgstr "Журнална FS"
+msgid "Clean /tmp at each boot"
+msgstr "Почистване на /tmp при всяко зареждане"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid "Malawi"
+msgstr "Малави"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No hard drives found"
-msgstr "Не е намерен твърд диск"
+msgid "Please choose your type of mouse."
+msgstr "Моля, изберете тип на мишката."
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "Моля, цъкнете на дяла"
+msgid "class of hardware device"
+msgstr "клас хардуерно устройство"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
 msgstr ""
-"Имате един голям FAT дял\n"
-"(по принцип се ползват от Microsoft Dos/Windows).\n"
-"Предлагам първо да промените големината на този дял\n"
-"(щракнете върху него, а след това щракнете върху \"Промени големината\")"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Choose action"
-msgstr "Изберете действие"
+"Това са машините и мрежите за които локално свързаните принтери ще бъдат "
+"достъпни:"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Магьосник"
+msgid "United Kingdom"
+msgstr "Англия"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
-msgstr ""
-"Ако смятате да използвате aboot, оставете свободно пространство (2048 "
-"сектора\n"
-"са достатъчни) в началото на диска"
+msgid "running"
+msgstr "стартиране"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "Първо създайте backup на своите данни"
+msgid "default"
+msgstr "по подрабиране"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Read carefully!"
-msgstr "Прочетете внимателно !"
+msgid "Indonesia"
+msgstr "Индонезия"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Encryption key (again)"
-msgstr "Ключ за криптиране (отново)"
+msgid "France [SECAM]"
+msgstr "Франция [SECAM]"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Encryption key"
-msgstr "Ключ за криптиране"
+msgid "restrict"
+msgstr "ограничи"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "The encryption keys do not match"
-msgstr "Ключовете за криптиране не съвпадат"
+msgid "must have"
+msgstr "нужен"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
 msgstr ""
-"Криптиращ ключ е прекалено прост (трябва да бъде дълга поне %d символа)"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose your filesystem encryption key"
-msgstr "Избор на криптиращ ключ за еашата файлова система"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Filesystem encryption key"
-msgstr "Криптиращ ключ за файлова система"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Type: "
-msgstr "Вид: "
+"CUPS не поддържа принтери на Novell сървъри или принтери изпращащи данни във "
+"свободно-изградена команда.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "on channel %d id %d\n"
-msgstr "на канал %d id %d\n"
+msgid "Senegal"
+msgstr "Сенегал"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Partition table type: %s\n"
-msgstr "Тип на таблицата с дялове: %s\n"
+msgid "Command line"
+msgstr "Команден ред"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-дискове %s\n"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
+"Нашите пълни решения, както и специални предложения на продукти и други "
+"\"лакомства\" са достъпни в нашият 'e-източник':"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Info: "
-msgstr "Информация: "
+msgid "access to administrative files"
+msgstr "достъп до файлове за администриране"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "Геометрия: %s цилиндри, %s глави, %s сектори\n"
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "Размер: %s\n"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ", многофункционално устройство на на паралелен порт \\#%s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Read-only"
-msgstr "Само за четене"
+msgid ""
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Device: "
-msgstr "Устройство: "
+msgid "Montserrat"
+msgstr "Монсерат"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+msgid "Automatic dependencies"
 msgstr ""
-"\n"
-"Тази специална стартираща\n"
-"ивица на дяла е за двойно\n"
-"стартиране на системата ви.\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
-msgstr ""
-"\n"
-"Вероятно е този дял да е\n"
-"Драйвер-дял, може би трябва\n"
-"трябва да го оставите.\n"
+msgid "Swap"
+msgstr "Swap"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Име на loopback файла: %s"
+msgid "Connecting to the Internet "
+msgstr "Свързвам се към Интернет"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "RAID-дискове %s\n"
+msgid "Restore Other"
+msgstr "Възстанови други"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "Размер на парчето %s\n"
+msgid "TV card"
+msgstr "TV карта"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "Ниво %s\n"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "Принтер на SMB/Windows 95/98/NT сървър"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+msgid ", "
 msgstr ""
-"Дял, който се стартира по подразбиране\n"
-"    (за MS-DOS boot, не за lilo)\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Loopback file(s):\n"
-"   %s\n"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
-"Loopback файл(ове):\n"
-"   %s\n"
+"Аргументи: (umask)\n"
+"\n"
+"Установява за root umask."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Remove selected host/network"
+msgstr "Изтриване на избран хост/мрежа"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Mounted\n"
-msgstr "Монтиран\n"
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix е Main Transport Agent (MTA), който е програма която пренася\n"
+"поща от машина на машина."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "Неформатиран\n"
+msgid "Disconnection from the Internet failed."
+msgstr "Разкачването от Интернет е неуспешно"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Formatted\n"
-msgstr "Форматиран\n"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
+"Тук може да изберете клавиш или клавишна комбинация, която \n"
+"ще ви позволи да избирате различни клавиатурни подредби\n"
+"(напр. latin и не latin)"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "От цилиндър %d до цилиндър %d\n"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Network Hotplugging"
+msgstr "Настройка на мрежата"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ", %s sectors"
-msgstr ", %s сектора"
+msgid "if set to yes, reports check result to tty."
+msgstr "ако е задаено да, изпраща резултата от проверката на tty."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Size: %s"
-msgstr "Размер: %s"
+msgid "Restore From CD"
+msgstr "Възстановява от  CD"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "Начало: сектор %s\n"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
+"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
+"използват Интернет връзката на този компютър.\n"
+"\n"
+"Убедете се, че вие сте конфигурирали вашата Мрежа/Интернет достъп "
+"използвайки drakconnect преди да правите друго.\n"
+"\n"
+"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
+"вътрешната си мрежа (LAN)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Name: "
-msgstr "Име: "
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "Моля, изберете кой мрежов адаптер да използвам за връзка към Интернет"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "Буква на устройството под DOS: %s (просто предположение)\n"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "partition %s is now known as %s"
-msgstr "дял %s сега е известен като %s"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Removing %s"
-msgstr "Изтриване на %s"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "Споделянето на Интернет връзката в момента е изключено."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Copying %s"
-msgstr "Копиране на %s"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Moving files to the new partition"
-msgstr "Премести файловете на нов дял"
+msgid "Latin American"
+msgstr "Латиноамериканска"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
-msgstr ""
-"Директорията %s вече съдържа някакви данни\n"
-"(%s)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "Промяна системата за печат"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Hide files"
-msgstr "Скрий файловете"
+msgid "Old device file"
+msgstr "Стар файл на устроство"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Move files to the new partition"
-msgstr "Премести файловете на нов дял"
+msgid "Info: "
+msgstr "Информация: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "След форматиране на дяла %s, всички данни върху него ще бъдат загубени"
+msgid "Button `%s': %s"
+msgstr "Бутон `%s': %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "Трябва да рестартирате, преди промените да влязат в сила"
+msgid "Please wait"
+msgstr "Моля изчакайте"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "Таблицата на дяловете на устройство %s ще бъде записана върху диска !"
+msgid "Genius NetMouse"
+msgstr "Genuis NetMouse"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "The package %s is needed. Install it?"
-msgstr "Пакет %s е необходим. Да го инсталирам?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "None"
+msgstr "Готово"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "Какъв тип разделяне на дялове ?"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "Всичко правилно ли е ?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "Внимание: тази операция е опасна"
+msgid "Ethernet Card"
+msgstr "Ethernet карта"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "chunk size"
-msgstr "големина на парчето"
+msgid "Info"
+msgstr "Информация"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "level"
-msgstr "ниво"
+msgid "Install"
+msgstr "Инсталирай"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
-msgid "device"
-msgstr "устройство"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"Цъкнете на \"%s\", ако искате да изтриете всички данни и\n"
+"дялове съществуващи на този твърд диск. Внимание, след цъкане на \"%s\", "
+"няма да можете да възстановите каквито и да било данни и дялове съществуващи "
+"на този твърд диск,\n"
+"включително каквито и да е Windows данни.\n"
+"\n"
+"Цъкнете \"%s\", за да отмените тази операция без загуба да данните и\n"
+"дяловете съществуващи на този твърд диск."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Various"
-msgstr "Различни"
+msgid "Exit install"
+msgstr "Изход от инсталационната програма"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Mount options"
-msgstr "Опции за mount:"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
+msgstr ""
+"Всичко е настроено.\n"
+"Сега можете да споделите Интернет връзката си с други компютри в локалната "
+"ви мрежа използвайки автоматична мрежова настройка (DHCP)."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "Файлът вече съшествува. Да го използвам ли ?"
+msgid "Remote CUPS server"
+msgstr "Отдалечен CUPS сървър"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "Файлът вече се използва то друг loopback, изберете друг файл."
+msgid "Sun - Mouse"
+msgstr "Мишка на Sun"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Give a file name"
-msgstr "Дайте име на файл"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"В системата ви има само един настроен мрежов адаптер:\n"
+"\n"
+"%s\n"
+"\n"
+"Смятам да установя локалната ви мрежа на този адаптер."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "Вид файлова система: "
+msgid "Minimal install"
+msgstr "Миминална инсталация"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Size in MB: "
-msgstr "Големина в MB: "
+msgid "Ethiopia"
+msgstr "Етиопия"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "Име на loopback файла: "
+msgid "Devanagari"
+msgstr "Давенаджари"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "This partition can't be used for loopback"
-msgstr "Този дял не може да бъде използван за loopback"
+msgid "Total size: %d / %d MB"
+msgstr "Обща големина: %d / %d MB"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM name?"
-msgstr "LVM име ?"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "disabled"
+msgstr "изключи"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "new"
-msgstr "нов"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "Локален принтер"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "Изберете съществуващ LVM за прибавяне"
+msgid "Disabling servers..."
+msgstr "Изключване на сървъри ..."
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "Изберете съществуващ RAID за прибавяне"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "Моля, изберете пакетите, които искате да инсталирате."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Moving partition..."
-msgstr "Мествя дяла ... "
+msgid "Installation of %s failed. The following error occured:"
+msgstr "Инсталацията на %s провалена. Появи се следната грешка:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Moving"
-msgstr "Местене"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgstr "Не мога да стартирам mkinitrd -f /boot/initrd-%s.img %s."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "На кой сектор искате да го преместите?"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
+msgstr ""
+"Избрали сте следния(те) сървър(и): %s\n"
+"\n"
+"\n"
+"Тези сървъри се активират по подразбиране. Те нямат известни проблеми със\n"
+"сигурността, но може да се намерят нови. В този случай, ще трябва да сте\n"
+"сигурни, че ще надграждате възможно най-бързо.\n"
+"\n"
+"\n"
+"Наистина ли искате да инсталирате тези сървъри ?\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Sector"
-msgstr "Сектор"
+msgid "Network printer (TCP/Socket)"
+msgstr "Мрежов принтер (TCP/Socket)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "На кой диск искате да го преместите ?"
+msgid "Backup User files..."
+msgstr "Резервно копие на потребителски файлове..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Move"
-msgstr "Премести"
+msgid "Install system"
+msgstr "Инсталиране на системата"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "New size in MB: "
-msgstr "Нова големина в MB: "
+msgid "First DNS Server (optional)"
+msgstr "Първи DNS сървър (по избор)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "Изберете нова големина"
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+"Алтернативно, вие може да зададете име на устройство/файл в изходния ред"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Resize"
-msgstr "Промени големината"
+msgid "dhcpd Config..."
+msgstr "Настройка на dhcpd..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr ""
-"След промяна големината на дяла %s, данниte върху него ще бъдат загубени"
+msgid "The setup has already been done, but it's currently disabled."
+msgstr "Установката вече е направена, но в момента е изключена."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "Всички данни на този дял трябва да бъдат архивирани"
+msgid "LILO/grub Installation"
+msgstr "LILO/grub инсталация"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "Големината на дяла не може да бъде променена"
+msgid "Israeli"
+msgstr "Израелска"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "Изчислявам границите на fat файловата система"
+msgid "load setting"
+msgstr "установяване на натоварване"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Where do you want to mount %s?"
-msgstr "Къде искате да монтирате устройство %s ?"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "Принтер \"%s\" на сървър \"%s\""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Не мога да махна точката на монтиране, тъй като дялът се използва за "
-"loopback.\n"
-"Първо махнете loopback"
+msgid "Floppy can be removed now"
+msgstr "Флопито може да бъде извадено сега"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "Къде искате да монтирате устройство %s ?"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Truly minimal install"
+msgstr "Миминална инсталация"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "Къде искате да монтирате loopback-файла %s ?"
+msgid "Denmark"
+msgstr "Дания"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr "Преход от ext2 към ext3"
+msgid "Moving partition..."
+msgstr "Мествя дяла ... "
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "Коя файлова система искате ?"
+msgid "(This) DHCP Server IP"
+msgstr "(Този) DHCP сървър IP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "Промяна типа на дяла"
+msgid "Test of the configuration"
+msgstr "Проверка на настройката"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
+msgid "Installing %s ..."
+msgstr "Инсталира %s ..."
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
-"След промяна на типа на дяла %s, всички данни върху него ще бъдат загубени"
+"Накрая, в зависимост от избора ви дали да избирате пакети един по един, ще\n"
+"ви бъде представено дърво съдържащо всички пакети подредени по групи и\n"
+"подргрупи. Докато обхождате дървото, можете да изберете цели групи, "
+"подгрупи\n"
+"или отделни пакети.\n"
+"\n"
+"Когато посочите пакет от дървото, ще се появи описание вдясно. Когато\n"
+"изборът е приключен, цъкнете бутона \"Инсталирай\", който ще пусне процеса\n"
+"на инсталация. В зависимост от скоростта на хардуера ви и броя на пакетите,\n"
+"които искате да бъдат инсталирани, процесът може да отнеме известно време.\n"
+"Очакваното време за приключване на процеса, че бъде показано на екрата, за\n"
+"да ви помогне да прецените дали имате достатъчно време да се насладите на\n"
+"чаша кафе.\n"
+"\n"
+"!! Ако е избран сървърен пакет, било то умишлено или защото е част от цяла\n"
+"група, ще бъдете помолени за потвърждение, че наистина искате този сървър\n"
+"да бъде инсталиран. В Mandrake Linux, всички сървъри тръгват по "
+"подразбиране\n"
+"при зареждане.Даже ако са сигурни и нямат известни проблеми, когато\n"
+"дистрибуцията се разпространява, може да се случи така, че да се появят\n"
+"дупки в сигурността, след като версията на Mandrake Linux е завършена. Ако\n"
+"не знаете за какво служи определена услуга или защо е инсталирана, цъкнете\n"
+"\"Не\". С цъкане на \"Да\"  ще инсталирате изброени услуги и те ще бъдат\n"
+"стартирани автоматично по подразбиране. !!\n"
+"\n"
+"Опцията \"Автоматични зависимости\" изключва предупредителните диалози,\n"
+"когато инсталаторът авоматично реши избере пакет. Това се случва, защото\n"
+"е решил, че се нуждае да задоволи зависимост с друг пакет, за да приключи\n"
+"успешно инсталацията.\n"
+"\n"
+"Малката иконка на дискетка в дъното на списъка позволява да заредите списък\n"
+"с пакети от предишна инсталация. Ако цъкнете на тази иконка, ще бъдете\n"
+"помолени да вкарате дискета създадена преди това в края на друга "
+"инсталация.\n"
+"Вижте втората подсказка по време на последната стъпка, за това как да\n"
+"създадете такава дискета."
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Remove the loopback file?"
-msgstr "Да премахна ли loopback файла ?"
+msgid "Choose your filesystem encryption key"
+msgstr "Избор на криптиращ ключ за еашата файлова система"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "Предпочитание: "
+msgid "Andorra"
+msgstr "Андора"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Start sector: "
-msgstr "Начален сектор: "
+msgid "Sierra Leone"
+msgstr "Сиера Леоне"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "Създай нов дял"
+msgid "Botswana"
+msgstr "Ботсвана"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Use for loopback"
-msgstr "Използвай за loopback"
+msgid "(default value: %s)"
+msgstr "(подразбираща стойност: %s)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Modify RAID"
-msgstr "Модифицирай RAID"
+msgid "Alternative test page (Letter)"
+msgstr "Алтернативна тестова страница (Писмо)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Remove from LVM"
-msgstr "Премахни от LVM"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "Премахни от RAID"
+msgid "Choose an X server"
+msgstr "Изберете X сървър"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Add to LVM"
-msgstr "Прибави към LVM"
+msgid "Swap partition size in MB: "
+msgstr "Големина на swap-дяла в MB: "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Add to RAID"
-msgstr "Прибави към RAID"
+msgid ""
+"Other (not drakbackup)\n"
+"keys in place already"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Format"
-msgstr "Форматирай"
+msgid "No changes to backup!"
+msgstr "Няма промени за резервно копие!"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Detailed information"
-msgstr "Подробна информация"
+msgid "Formatted\n"
+msgstr "Форматиран\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "Опитвам се да спася таблицата на дяловете"
+msgid "Type of install"
+msgstr "Тип инсталация"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
-msgstr ""
-"Сложете дискета във флопито\n"
-"Всички данни, намиращи се върху дискетата, ще бъдат загубени"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "Принтер \"%s\" на SMB/Windows сървър \"%s\""
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Warning"
-msgstr "Предупреждение"
+msgid ""
+"\n"
+"- Daemon (%s) include:\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Select file"
-msgstr "Изберете файл"
+msgid "%d comma separated numbers"
+msgstr "%d със запетая разделени номера"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
 msgstr ""
-"Резервната таблица на дяловете не е със същата големина\n"
-"Да продължа ли все пак ?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Removable media automounting"
-msgstr "Автоматично монтиране на сменяем носител"
+"rusers протокола позволява на мрежовите потребители да проверяват кой е\n"
+"влязъл на друга отговарящата машина."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Reload partition table"
-msgstr "Презареди таблицата с дяловете"
+msgid "Automatic Steps Configuration"
+msgstr "Настройка на автоматичните стъпки"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "Спасяване таблицата с дяловете"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
+msgstr ""
+"Какво искате да знаете повече за общността на Отвореният изходен код? Влезте "
+"в света на Свободният Софтуер"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore partition table"
-msgstr "Възстанови таблицата с дяловете"
+msgid "Barbados"
+msgstr "Барбадос"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Save partition table"
-msgstr "Запази таблицата с дяловете"
+msgid "Please select data to backup..."
+msgstr "Моля, изберете данни за резервно копие..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
-"Ако искате още дялове, моля изтрийте един, за да можете да създадете един "
-"разширен дял"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "I can't add any more partition"
-msgstr "Не мога да добавя повече дялове"
+"Връзката пропадна.\n"
+"Проверете си конфигурацията в Контролен център на Mandrake."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "Всички първични дялове се използват"
+msgid "received"
+msgstr "получени"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Hard drive information"
-msgstr "Информацията за твърдия диск"
+msgid "/File/_New"
+msgstr "/Файл/_Нов"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Auto allocate"
-msgstr "Автоматично създаване"
+msgid "The DNS Server IP"
+msgstr "DNS сървър IP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Clear all"
-msgstr "Изчисти всичко"
+msgid "IP Range End:"
+msgstr "Край на IP обхват:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "Искате ли да запазите промените в /etc/fstab"
+msgid "High"
+msgstr "Високо"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "Изход, без да запис на таблицата на дяловете ?"
+msgid "NoVideo"
+msgstr "Без графика"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without saving"
-msgstr "Изход без запис"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "this field describes the device"
+msgstr "Това поле описва устройството"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "Продължение въпреки всичко ?"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Добавяне на принтер на Star Office/OpenOffice.org/GIMP"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "Премини в Експертен режим"
+msgid "Local Printers"
+msgstr "Локални принтери"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Toggle to normal mode"
-msgstr "Премини в Нормален режим"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Installation image directory"
+msgstr "Xpmac (инсталация графичен драйвер)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Undo"
-msgstr "Върни"
+msgid "NIS Server"
+msgstr "NIS сървър"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Exit"
-msgstr "Излез"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Порт"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a partition"
-msgstr "Изберете дял"
+msgid "Spain"
+msgstr "Испания"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Choose another partition"
-msgstr "Изберете друг дял"
+msgid "This user name has already been added"
+msgstr "Това потребителско име вече е добавено"
 
-#: ../../diskdrake/removable.pm:1
+#: ../../interactive.pm:1
 #, c-format
-msgid "Change type"
-msgstr "Промяни типа"
+msgid "Choose a file"
+msgstr "Изберете файл"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Search servers"
-msgstr "Търси сървъри"
+msgid "Apply"
+msgstr "Приложи"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, c-format
-msgid "Domain"
-msgstr "Домейн"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "Използвай автоматично засичане"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Username"
-msgstr "Потребителско име"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "Споделянето на Интернет връзката е изключено."
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
-"Моля, въведете вашето име, парола и име на домейн за достъп до този хост."
+msgid "San Marino"
+msgstr "Сан Марино"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Domain Authentication Required"
-msgstr "Изисква Идентификация за Домейн"
+msgid "Belgium"
+msgstr "Белгия"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Another one"
-msgstr "Друго"
+msgid "Kuwait"
+msgstr "Кувейт"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which username"
-msgstr "Кое потребителско име"
+msgid "Choose the window manager to run:"
+msgstr "Изберете мениджър на прозорци за стартиране:"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr "Не мога да вляза като използвам име %s (грешна парола?)"
+msgid "sub generation of the cpu"
+msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "cpu # "
-msgstr "cpu # "
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "First Time Wizard"
+msgstr "Добре дошли в първоначалния помощник"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr "SMBus контролери"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"Появи се грешка, но не знам как да се справя с нея деликатно.\n"
+"Можете да продължите на свой риск."
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "USB controllers"
-msgstr "USB контролери"
+msgid "please wait, parsing file: %s"
+msgstr "моля изчакайте, правя разбор на файл: %s"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "SCSI controllers"
-msgstr "SCSI контролери"
-
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Firewire controllers"
-msgstr "USB контролери"
+msgid "Taiwan"
+msgstr "Тайван"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
-msgstr "(E)IDE/ATA контролери"
+msgid "Pakistan"
+msgstr "Пакистан"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Joystick"
-msgstr "Джойстик"
+msgid ""
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Scanner"
-msgstr "Скенер"
+msgid "Permissions"
+msgstr "Права"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Unknown/Others"
-msgstr "Неизвестни/Други"
+msgid "Provider name (ex provider.net)"
+msgstr "Име на доставчика (напр. provider.net)"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr "Бриджове и системни контролери"
+msgid "Version: %s\n"
+msgstr "Версия: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Modem"
-msgstr "Модем"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"Вашата система е с малки ресурси. Може да имате проблеми с инсталирането\n"
+"на Mandrake Linux. Ако се появи проблем опитайте с текстовата инсалация. "
+"Зацелта,\n"
+"натиснете 'F1', когато стартирате от CDROM и въведете 'теьт'."
 
-#: ../../harddrake/data.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet карта"
+msgid "Use the Windows partition for loopback"
+msgstr "Използвай за Windows дялът за loopback"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Processors"
-msgstr "Процесори"
+msgid "Armenian (typewriter)"
+msgstr "Арменска (пишеща машина)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Connection type: "
+msgstr "Тип на връзката: "
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Soundcard"
-msgstr "Звукова карта"
+msgid "Graphical interface"
+msgstr "Графичен интерфайс"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "Other MultiMedia devices"
-msgstr "Друга мултимедийни устройства"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s с хардуерно 3D ускорение"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tvcard"
-msgstr "TV карта"
+msgid "India"
+msgstr "Индия"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Videocard"
-msgstr "Видео карта"
+msgid "Chad"
+msgstr "Чад"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Tape"
-msgstr "Лента"
+msgid "Slovakia"
+msgstr "Словакия"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "DVD-ROM"
-msgstr "DVD-ROM"
+msgid "Singapore"
+msgstr "Сингапур"
 
-#: ../../harddrake/data.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr "CD/DVD записващо"
+msgid "Cambodia"
+msgstr "Камбоджа"
 
-#: ../../harddrake/data.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "CDROM"
-msgstr "CDROM"
+msgid "Monitor HorizSync: %s\n"
+msgstr "Хоризонтална синхронизация на монитора: %s\n"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Disk"
-msgstr "Диск"
+msgid "Path"
+msgstr "Път"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Zip"
-msgstr "Zip устройство"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
+msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Floppy"
-msgstr "Флопи"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Let me pick any driver"
-msgstr "Нека избера драйвер"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr ""
+"Принтер %s\n"
+"Какво искате да поправите по този принтер ?"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Driver:"
-msgstr "Драйвер: "
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "Добави потребител"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8535,140 +8574,97 @@ msgstr ""
 "\n"
 "Текущо използваният драйвер за вашата \"%s\" звукова карта е \"%s\" "
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr "Избор на случаен драйвер"
-
-#: ../../harddrake/sound.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
+"Искате ли да позволите на потребители да поделят техните директории?\n"
+"Разрешаването на това ще позволи на потребителите просто да цъкнат на "
+"\"Поделя\" в konqueror или nautilus.\n"
+"\n"
+"\"Клиентска\" позволява за потребител настройка.\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
-msgstr "Затруднения при звук"
+msgid ""
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
+msgstr ""
+"Може изберете зареждане или запис на избора на пакети на флопи.\n"
+"Форматът е същият като auto_install генерираните дискети."
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr "Грешка: \"%s\" драйвер за вашата карта е инсталиран"
+msgid "China (broadcast)"
+msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unkown driver"
-msgstr "Неизвестен драйвер"
+msgid "Use quota for backup files."
+msgstr "Използва квота за файлове на резервно копие."
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr "Няма драйвер за вашата звукова карта (%s)"
+msgid "Configuring printer \"%s\"..."
+msgstr "Настройка на принтера \"%s\"..."
 
-#: ../../harddrake/sound.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No known driver"
-msgstr "Няма известен драйвер"
+msgid "Internet connection"
+msgstr "Интернет връзка"
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
 msgstr ""
-"Няма свободен драйвер за вашата звукова карта (%s), но има собствени драйвер "
-"на \"%s\"."
+"Зареждането на модула %s не успя.\n"
+"Искате ли да опитате отново с други параметри ?"
 
-#: ../../harddrake/sound.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "No open source driver"
-msgstr ""
+msgid "Welcome to the Open Source world."
+msgstr "Добре дошли в света на Отвореният Изходен код"
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "Моля, почакайте ... Прилагане на настройките"
+msgid "Bosnia and Herzegovina"
+msgstr "Босна и Херцеговина"
 
-#: ../../harddrake/sound.pm:1
+#: ../../fsedit.pm:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
-msgstr ""
-
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Trouble shooting"
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
 msgstr ""
+"Нуждаете се от истинска файлова система (ext2, reiserfs,xfs, или jfs) за "
+"тази точка на монтиране\n"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "Моля, пробвайте мишката си"
 
-#: ../../harddrake/sound.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
-msgstr ""
-"\n"
-"\n"
-"Вашата карта в момента използва %s\"%s\" драйвер (подразбиращ драйвер за "
-"картата ви е \"%s\")"
+msgid "Netherlands"
+msgstr "Холандия"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
-msgstr ""
-"Тук може да изберете алтернативен драйвер (OSS или ALSA) за вашата звукова "
-"карта (%s)."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "Изпращам файлове..."
 
-#: ../../harddrake/sound.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Sound configuration"
-msgstr "Настройка за звук"
+msgid "Internal ISDN card"
+msgstr "Вътрешна ISDN карта"
 
 #: ../../harddrake/sound.pm:1
 #, c-format
@@ -8679,1666 +8675,1634 @@ msgstr ""
 "Няма известнен  OSS/ALSA алтернативен драйвер за вашата звукова карта (%s) "
 "която в момента използва \"%s\""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr "Няма алтернативен драйвер"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "enable radio support"
-msgstr "разрешава подръжка на радио"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Radio support:"
-msgstr "Подръжка на радио:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "PLL setting:"
-msgstr "PLL настройки:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
-msgstr ""
+msgid "Title"
+msgstr "Заглавие"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Number of capture buffers:"
+msgid "Install & convert Fonts"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Tuner type:"
-msgstr "Тип на тунер:"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Card model:"
-msgstr "Модел на карта:"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "WARNING"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|Generic"
-msgstr "Неизвестен|Общ"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
-msgstr "Неизвестен|CPH06X (bt878) [много производители]"
-
-#: ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr "Неизвестен|CPH05X (bt878) [много производители]"
-
-#: ../../harddrake/v4l.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Auto-detect"
-msgstr "Автоматично засичане"
+msgid "Installing bootloader"
+msgstr "Инсталиране на bootloader"
 
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Do"
-msgstr "Направи"
+msgid "replay"
+msgstr "повтори"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "Вашият избор ? (по подразбиране е %s)"
+msgid "detected %s"
+msgstr "засечена %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Bad choice, try again\n"
-msgstr "Лош избор, опитайте отново\n"
+msgid "Virgin Islands (U.S.)"
+msgstr "Вирджински Острови (САЩ)"
 
-#: ../../interactive/stdio.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Re-submit"
-msgstr ""
+msgid "Bad backup file"
+msgstr "Лош backup-файл"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"=> Notice, a label changed:\n"
-"%s"
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
-"=> забележка, променен етикет:\n"
-"%s"
+"Установката на Споделянето на Интернет връзката е вече завършена.\n"
+"В момента е изключена.\n"
+"\n"
+"Какво искате да направите ?"
 
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+msgid "Enter IP address and port of the host whose printers you want to use."
 msgstr ""
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr "=> Има много неща за избор от (%s).\n"
-
-#: ../../interactive/stdio.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "Вашият избор ? (по подразбиране е `%s'%s) "
+msgid "Pipe into command"
+msgstr "Програмен канал към команда"
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
 msgstr ""
+"Част от хардуера на компютъра ви се нуждае от ``собствените си'' драйвери, "
+"за да работи.\n"
+"Можете да намерите повече информация за това на: %s"
 
-#: ../../interactive/stdio.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you want to click on this button?"
-msgstr "Искате ли да цъкнете на този бутон?"
+msgid "Detecting devices..."
+msgstr "Откриване на устройства ..."
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Button `%s': %s"
-msgstr "Бутон `%s': %s"
+msgid "Click here to launch the wizard ->"
+msgstr "Цъкнете тук, за да стартирате магьосника ->"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "Вашият избор ? (по подразбиране е `%s')"
+msgid "Haiti"
+msgstr "Хаити"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Entries you'll have to fill:\n"
-"%s"
+"Description of the fields:\n"
+"\n"
 msgstr ""
-"Записите които вие ще трябва да запълните:\n"
-"%s"
+"Описание на полетата:\n"
+"\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the name of the CPU"
+msgstr "името на производителя на устройството"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
-msgstr ""
-"Зареждането на модула %s не успя.\n"
-"Искате ли да опитате отново с други параметри ?"
+msgid "Refreshing printer data..."
+msgstr "Опресняване на данните от принтера ..."
 
-#: ../../modules/interactive.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Specify options"
-msgstr "Задай опции"
+msgid "You must also format %s"
+msgstr "Вие трябва също да форматирате %s"
 
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Autoprobe"
-msgstr "Автоматично засичане"
+msgid "Be careful: this operation is dangerous."
+msgstr "Внимание: тази операция е опасна"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
-msgstr ""
-"В някои случаи, %s драйверът се нуждае от допълнителна информация, за\n"
-"да работи коректно, въпреки че нормално работи и без нея. Желаете ли "
-"даподадете\n"
-"допълнителни опции за него или да разрешите на драйвера да потърси "
-"информацията\n"
-"от която се нуждае ? По принцип това може да забие компютъра ви, но няма да "
-"го повреди."
+msgid "Insert a floppy containing package selection"
+msgstr "Сложете дискета съдържаща избор на пакети"
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "Кой %s драйвер да пробвам ?"
+msgid "Server: "
+msgstr "Сървър: "
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Module options:"
-msgstr "Опции на модула:"
+msgid "Security Alerts:"
+msgstr "Предупреждения за защита:"
 
-#: ../../modules/interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
-msgstr ""
-"Сега можете да подадете опциите му до модула %s.\n"
-"Опциите са във формат ``име=стойност име2=стойност2 ...''.\n"
-"Например: ``io=0x300 irq=7''"
+msgid "Sweden"
+msgstr "Швеция"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+msgid "Use Expect for SSH"
 msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "(module %s)"
-msgstr "(модул %s)"
+msgid "Poland"
+msgstr "Полша"
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "Инсталиране на драйвер за %s платка %s"
+msgid "Importance: %s\n"
+msgstr "Важност: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "See hardware info"
-msgstr "Виж хардуерната информация"
+msgid "Please check if you want to eject your tape after the backup."
+msgstr ""
+"Моля, проверете дали искте да извадите лентата след като правите резервно "
+"копие."
 
-#: ../../modules/interactive.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "Имате ли някакъв %s интерфейс?"
+msgid "Other ports"
+msgstr "Други портовете"
 
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "Имате ли друг(и) ?"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "Намерени са %s %s интерфейси"
+msgid "SMBus controllers"
+msgstr "SMBus контролери"
 
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr "Вие може да конфигурирате всеки параметър на модулът тук."
+msgid "Connection timeout (in sec)"
+msgstr "Timeout на връзката (в сек)"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "comma separated strings"
-msgstr "низове разделени със запетая"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "comma separated numbers"
-msgstr "номера разделени със запетая"
+msgid "Croatian"
+msgstr "Хърватска"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr "%d със запетая разделен низ"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "Изпозване на съществуващ дял"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated numbers"
-msgstr "%d със запетая разделени номера"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "Не мога да направя 'fork': %s"
 
-#: ../../modules/parameters.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "a number"
-msgstr "номер"
+msgid "/Help/_About..."
+msgstr "/Помощ/_Относно..."
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Remove user directories before restore."
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
 msgstr ""
-"Най-честия начин за свързване чрез ADSL е PPPOE.\n"
-"Някои връзки използват PPTP, а maлко използват DHCP.\n"
-"Ако не знаете, изберете 'използвай PPPOE'."
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
-#, c-format
-msgid "Connect to the Internet"
-msgstr "Свържи се към Интернет"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "Конфигурация на CUPS поделен принтер"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
-msgstr "Sagem (използва pppoa) usb"
+msgid "could not find any font in your mounted partitions"
+msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Alcatel speedtouch usb"
-msgstr "Alcatel speedtouch USB"
+msgid "F00f bug"
+msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "use dhcp"
-msgstr "използвай DHCP"
+msgid "XFree %s"
+msgstr "XFree %s"
 
-#: ../../network/adsl.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "use pptp"
-msgstr "използвай PPPTP"
+msgid ""
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
+msgstr ""
+"Какъв DHCP клиент искате да използвате ?\n"
+"По подразбиране е dhcp-client ?"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "use pppoe"
-msgstr "използвай PPPOE"
+msgid "Domain Name:"
+msgstr "Име на домейна:"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Other ports"
-msgstr "Други портовете"
+msgid "On Floppy"
+msgstr "Запазва на дискета"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Everything (no firewall)"
-msgstr "Всичко (без firewall)"
+msgid "Restore"
+msgstr "Възстановява"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
-"Зададен е грешен порт: %s.\n"
-"Форматът е \"port/tcp\" или \"port/udp\", \n"
-"където порт е между 1 и 65535."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-"Вие може да въведете други портове. \n"
-"Валидни са например: 139/tcp 139/udp.\n"
-"Погледнете в /etc/services за информация"
+msgid "Looking for available packages..."
+msgstr "Търся налични пакети..."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
-msgstr ""
+msgid "Init Message"
+msgstr "Стартово съобщение"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
-msgstr ""
-"drakfirewall конфигурация\n"
-"\n"
-"Убедете се, че вие имате конфигуриран Интернет/Интранет достъп с\n"
-"drakconnect преди да правите други неща по-нататък."
+msgid "Rescue partition table"
+msgstr "Спасяване таблицата с дяловете"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
-msgstr ""
-"Настройчик за малка защитна стена\n"
-"\n"
-"Това настройва персонална защитна стена за тази Mandrake Linux машина.\n"
-"За мощно постветено на защитата решение, моле, погледнете специализираната\n"
-"MandrakeSecurity Firewall дистрибуция."
+msgid "Connection complete."
+msgstr "Връзката е установена."
 
-#: ../../network/drakfirewall.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network card"
-msgstr "Няма открита мрежова карта"
+msgid "Cyprus"
+msgstr "Кипър"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "POP and IMAP Server"
-msgstr "POP и IMAP сървър"
+msgid "Remove from RAID"
+msgstr "Премахни от RAID"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Mail Server"
-msgstr "Пощенски сървър"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr ""
+"Криптиращ ключ е прекалено прост (трябва да бъде дълга поне %d символа)"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Domain Name Server"
-msgstr "Domain Name Server"
+msgid "Configuration Wizards"
+msgstr "Конфигурационни Магьосници"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Web Server"
-msgstr "Web Сървър"
+msgid "ISDN connection"
+msgstr "ISDN връзка"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
-msgstr ""
+msgid "primary"
+msgstr "първи"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Host name"
-msgstr "Име на хост:"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr " на SMB/Windows сървър \"%s\", поделен \"%s\""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "Име на хост:"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
 msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
 "\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
 "\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
 msgstr ""
+"Сега можете да изберете кои услуги да се пускат при стартиране.\n"
+"\n"
+"Тук са представени всички услуги, достъпни с настоящата инсталация.\n"
+"Прегледайте ги внимателно и изключете тези, които не ви трябват винаги при "
+"стартиране.\n"
+"\n"
+"Можете видите кратък обяснителен текст за услугата, като поставите курора на "
+"мишката си\n"
+"над името на услугата. Ако не сте сигурни, дали услугата е полезна или не, "
+"по-добре\n"
+"е да оставите избора по подразбиране.\n"
+"\n"
+"Внимавайте с тази стъпка, ако смятате да използвате машината си като "
+"сървър:\n"
+"сигурно не бихте искали да пускате услуги, от които не се нуждаете. Моля,\n"
+"запомнете, че някои услуги могат да бъдат опасни, ако са включени на "
+"сървъра.\n"
+"По принцип, избирайте само услугите, от които наистина се нуждаете."
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "Настойка на мрежата"
-
-#: ../../network/ethernet.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "Моля, изберете кой мрежов адаптер да използвам за връзка към Интернет"
+msgid "Skip"
+msgstr "Прескача"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "Изберете мрежов интерфейс"
+msgid "Niue"
+msgstr "Нию"
 
-#: ../../network/ethernet.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
 msgstr ""
-"Не беше намерен мрежов адаптер в системата ви.\n"
-"Не можете да настроите такъв вид връзка."
+"Активира/деактивира всички мрежови интерфейси, настроени да се пускат\n"
+"при стартиране на машината."
 
-#: ../../network/ethernet.pm:1
-#, c-format
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
 msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
-msgstr ""
-"Какъв DHCP клиент искате да използвате ?\n"
-"По подразбиране е dhcp-client ?"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr "Честота на процесора в Mhz"
 
-#: ../../network/isdn.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "Не е намерена ISDN PCI карта. Моля изберете от следващият екран."
+msgid "important"
+msgstr "важен"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
+msgid "Total Progress"
 msgstr ""
-"Открита е ISDN PCI карта, но с непознат тип. Моля изберете някоя PCI карта "
-"от следващият екран."
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "Коя от следните ISDN картати е вашата ?"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "ISDN Configuration"
-msgstr "Настройка на IDSN"
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Abort"
-msgstr "Отказ"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Continue"
-msgstr "Нататък"
-
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
-msgstr ""
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
-"Ако имате ISA карта, стойностите на следващия екран трябва да са верни.\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"Ако имате PCMCIA карта, ще трябва да знаете IRC и IO на картата си.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "I don't know"
-msgstr "Не знам"
+msgid "Users"
+msgstr "Потребители"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Aruba"
+msgstr "Аруба"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "Preparing bootloader..."
+msgstr "Подготовка на bootloader"
 
-#: ../../network/isdn.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "Какъв тип карта имате ?"
+msgid "Gateway (e.g. %s)"
+msgstr "Gateway (напр. %s)"
 
-#: ../../network/isdn.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
-msgstr "Намерен е \"%s\" интерфейс. Искате ли да го използвате?"
+msgid "The passwords do not match"
+msgstr "Паролите не съвпадат"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Какъв протокол желаете да промените ?"
+msgid "Examples for correct IPs:\n"
+msgstr "Примери на правилни IP:\n"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Протокол за останалия свят"
+msgid "Frequency (MHz)"
+msgstr "Честорта (MHz)"
 
-#: ../../network/isdn.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"Протокол за останалия свят\n"
-" без D-Канал (наета линия)"
+"За да използвате запазен избор на пакети, стартирайте инсталацията с ``linux "
+"defcfg=floppy''"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "European protocol"
-msgstr "Европейски протокол"
+msgid "the number of the processor"
+msgstr "номерът на процесора"
 
-#: ../../network/isdn.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "European protocol (EDSS1)"
-msgstr "Протокол Европа (EDSS1)"
+msgid "Hardware clock set to GMT"
+msgstr "Хадруерният ви часовник е настроен по GMT"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
-msgstr ""
-"Посочете доставчика си.\n"
-" Ако не е в списъка, изберете Unlisted"
+msgid "Give a file name"
+msgstr "Дайте име на файл"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "Външен ISDN модем"
+msgid "Please choose the port that your printer is connected to."
+msgstr "Моля, изберете порт към който свързан принтера ви."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Internal ISDN card"
-msgstr "Вътрешна ISDN карта"
+msgid "Change Cd-Rom"
+msgstr "Смяна на CD-ROM"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "Какъв е типът на ISDN връзката ?"
+msgid "Paraguay"
+msgstr "Парагвай"
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr ""
+"Използва инкрементално създаване на резервно копие ( не замена старите)"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Магьосник за настройка на мрежата"
+msgid "There's no known driver for your sound card (%s)"
+msgstr "Няма драйвер за вашата звукова карта (%s)"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "Стара настройка (isdn4net)"
+msgid "force"
+msgstr "принудително"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "New configuration (isdn-light)"
-msgstr "Нова настройка (isdn-light)"
+msgid "Exit"
+msgstr "Излез"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
 msgstr ""
-"Коя ISDN настройка предпочитате ?\n"
-"\n"
-"* Старата настройка използва isdn4net. Съдържа мощни инструменти\n"
-"  но е капризна за настройка и не е стандартна.\n"
-"\n"
-"* Новата настройка е по-лесна за разбиране, по стандартна,\n"
-"  но с по-малко инструменти.\n"
-"\n"
-"Препоръчваме ви олекотената настройка.\n"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Do nothing"
-msgstr "Не прави нищо"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Install rpm"
-msgstr "Инсталира rpm"
+"ЗАБЕЛЕЖКА: В зависимост от модела принтер и печатащата система до %d MB "
+"допълнително софтуер ще бъде инсталиран."
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
+"Нямате настроен интерфейс.\n"
+"Настройте ги преди това, като цъкнете на 'Настройка'"
 
-#: ../../network/modem.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Title"
-msgstr "Заглавие"
+msgid "Estonian"
+msgstr "Естонска"
 
-#: ../../network/modem.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
 msgstr ""
-"Вашият модем не се поддържа от системата.\n"
-"Погледнете в http://www.linmodems.org"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "Втори DNS сървър (по избор)"
-
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "Първи DNS сървър (по избор)"
+"Apache е World Wide Web (WWW) сървър. Той служи да обработва на HTML "
+"файлове\n"
+"и CGI."
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Domain name"
-msgstr "Име на домейна"
+msgid "Add/Del Clients"
+msgstr "Добавя/Изтрива клиенти"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "CHAP"
-msgstr "CHAP"
+msgid "Choose the network interface"
+msgstr "Изберете мрежов интерфейс"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Script-based"
-msgstr "Базирана на скрипт"
+msgid "Unknown Model"
+msgstr "Неизвестен Модел"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Terminal-based"
-msgstr "Базирана на терминал"
+msgid "CD/DVD burners"
+msgstr "CD/DVD записващо"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"Дял, който се стартира по подразбиране\n"
+"    (за MS-DOS boot, не за lilo)\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "Потребителско име"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image"
+msgstr "Изберете файл"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../network/shorewall.pm:1
 #, c-format
-msgid "Phone number"
-msgstr "Телефонен номер"
+msgid "Firewalling configuration detected!"
+msgstr "Открита е настройка на Защитна Стена !"
 
 #: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Connection name"
 msgstr "Име на връзката"
 
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Dialup options"
-msgstr "Опции за избиране по телефон"
-
-#: ../../network/modem.pm:1
-#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "Моля, изберете сериен порт към който свързан модемът ви."
-
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "Настройка на мрежата"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
-"Появи се проблем при конфигурацията.\n"
-"Проверете вашата връзка през net_monitor или mcc. Ако вашата връзка не "
-"работи , вие трябва да преконфигурирате."
+"x координати на текстовата рамка\n"
+"в брой символи"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
-msgstr ""
-"След като стане това, препоръчваме ви да рестартирате X\n"
-"средата си, за да избегнете проблеми със смяната името на хоста."
+msgid "Updating package selection"
+msgstr "Обновяване на избора на пакети"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
-msgstr ""
-"Поздравления, мрежовате и Интернет настройката е завършена.\n"
-"\n"
-"Настройките ще бъдат приложени към системата ви.\n"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "Къде искате да монтирате loopback-файла %s ?"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
 msgstr ""
-"Изникна проблем при рестартирането на мрежата:\n"
-"\n"
-"%s"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr "Мрежата се нуждае от престартиране. Искате ли да я престартирам?"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "Настройка на мрежата"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "Искате ли да стартирате връзката си при зареждане ?"
+"Дискетата е успешно създадена.\n"
+"Сега можете да преиграете инсталацията."
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection"
-msgstr "Интернет връзка"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "номерът на процесора"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
 msgstr ""
-"Настроили сте няколко начина за връзка към Интернет.\n"
-"Изберете този, който искате да използвате.\n"
-"\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose the connection you want to configure"
-msgstr "Изберете връзката, който искате да използвате"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet карти засечени"
+msgid "Replay"
+msgstr "Повтори"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LAN connection"
-msgstr "LAN връзка"
+msgid "Backup other files"
+msgstr "Резервно копие на други файлове"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "cable connection detected"
-msgstr "засечена е кабелна връзка"
+msgid "No floppy drive available"
+msgstr "Няма флопи устройство"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cable connection"
-msgstr "Кабелна връзка"
+msgid "Backup files are corrupted"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "detected"
-msgstr "засечена "
+msgid "TV norm:"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "ADSL connection"
-msgstr "ADSL връзка"
+msgid "Cpuid family"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "detected %s"
-msgstr "засечена %s"
+msgid "32 MB"
+msgstr "32 МБ"
 
-#: ../../network/netconnect.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "ISDN connection"
-msgstr "ISDN връзка"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Литвийска AZERTY (нова)"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Winmodem connection"
-msgstr "Winmodem връзка"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "detected on port %s"
-msgstr "засечен на порт %s"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"Маркирали сте софтуерен RAID дял като root (/).\n"
+"Няма зареждаща програма, която да може да се справи с него без /boot дял.\n"
+"Така че добавете /boot дял"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "Обикновена модемна връзка"
+msgid "Previous"
+msgstr "Предишен"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "Откриване на устройства ..."
+msgid "Other OS (MacOS...)"
+msgstr "Друга ОС (MacOS...)"
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "Разширени функиции"
+msgid "To activate the mouse,"
+msgstr "За да активирате мишката си,"
 
-#: ../../network/netconnect.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Use auto detection"
-msgstr "Използвай автоматично засичане"
+msgid "Bringing up the network"
+msgstr "Включвам мрежата"
 
-#: ../../network/netconnect.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "Изберете профил за настройка"
+msgid "Screenshots will be available after install in %s"
+msgstr "Снимки ще бъдат налични след инсталиране в %s"
 
-#: ../../network/netconnect.pm:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
 "\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
-msgstr ""
-"Добре дошли при магьосника за настройка на мрежа\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
 "\n"
-"Вие сте на път да настроите Интернет/мрежовата си връзка.\n"
-"Ако не искате да използвате автоматично засичане, изключете кутийката.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
-msgstr ""
-"Тъй като правите мрежова инсталация, мрежата ви вече е настроена.\n"
-"Цъкнете Ok, за да запазите настройката, или Отмяна, за да пренастоите "
-"Интернет и мрежовата си връзка.\n"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
 "\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
 "\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
 "\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
 "\n"
-"Press OK to continue."
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
 msgstr ""
+"Беше засечен повече от един Microsoft Windows дял\n"
+"на твърдия ви диска. Изберете този, чиято дължина искате да промените, за "
+"да\n"
+"инсталирате Mandrake Linux операционна система.\n"
 "\n"
 "\n"
+"За информация, всеки дял е изброен както следва: \"Linux име\", \"Windows име"
+"\", \"Капацитет\".\n"
 "\n"
-"Сега ще настроим %s връзката.\n"
+"\"Linux името\" се кодира както следва: \"тип на диска\", \"номер на диска"
+"\",\n"
+"\"номер на дял\" (например, \"hda1\").\n"
 "\n"
-"Натиснете OK, за да продължите."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "We are now going to configure the %s connection."
-msgstr "Сега ще настроим %s връзката."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "Интернет връзка и настройка"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Configure the connection"
-msgstr "Конфигуриране на връзката"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Disconnect"
-msgstr "Отвържи"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Connect"
-msgstr "Свържи"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
 "\n"
-"You can reconfigure your connection."
-msgstr ""
+"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
+"е\n"
+"SCSI твърд диск.\n"
 "\n"
-"Можете да пренастроите връзката."
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid ""
 "\n"
-"You can connect to the Internet or reconfigure your connection."
-msgstr ""
+"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
+"дискове:\n"
+"\n"
+"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
+"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
+"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
+"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
 "\n"
-"Можете да се свържете към Интернет или да пренастроите връзката."
+"\n"
+"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
+"\"втори твърд диск\" и т.н..\n"
+"\n"
+"\"Windows името\" е буквата на твърдия ви диск под Windows (първият диск "
+"или\n"
+"дял се нарича \"C:\")."
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "В момента не сте свързани към Интернет"
+msgid "Tanzania"
+msgstr "Танзания"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Computing FAT filesystem bounds"
+msgstr "Изчислявам границите на fat файловата система"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"You can disconnect or reconfigure your connection."
+"Backup Sources: \n"
 msgstr ""
 "\n"
-"Можете да се отвържете или да пренастроите връзката."
+"Източник за резервно копие: \n"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "В момента сте свързани към Интернет"
+msgid "Content of the file"
+msgstr "Съдържание на файла"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "URL трябва да е започва с 'ftp:' или 'http:'"
+msgid "Authentication LDAP"
+msgstr "LDAP ауторизация"
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "Proxy-сървъра трябва да е http://..."
+msgid "Let me pick any driver"
+msgstr "Нека избера драйвер"
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Profile "
+msgstr "Профил "
 
-#: ../../network/network.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "transmitted"
+msgstr "прехвърлени"
 
-#: ../../network/network.pm:1
-#, c-format
-msgid "Proxies configuration"
-msgstr "Настройка на proxy"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "Запази избор на пакети"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/network.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "DNS сървъра трябва да бъде във формат 1.2.3.4"
+msgid "%d comma separated strings"
+msgstr "%d със запетая разделен низ"
 
-#: ../../network/network.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "Gateway устройство"
+msgid "Here is the full list of keyboards available"
+msgstr "Ето пълен списък на достръпните клавиатури"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Gateway (e.g. %s)"
-msgstr "Gateway (напр. %s)"
+msgid "Theme name"
+msgstr "Име на тема"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "DNS server"
-msgstr "DNS сървър"
+msgid "/_Help"
+msgstr "/_Помощ"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
-"Моля, въведете host name за машината.\n"
-"Host името трябва да буде напълно квалифицирано име,\n"
-"като ``mybox.mylab.myco.com''.\n"
-"Можете също да въведете IP адреса на Вашия gateway, ако имате такъв"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
-msgstr ""
+msgid "the width of the progress bar"
+msgstr "ширината на лентата за прогрес"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
-msgstr ""
+msgid "Cook Islands"
+msgstr "Острови Кук"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "IP адресът трябва да бъде във формат 1.2.3.4"
+msgid "Formatting partition %s"
+msgstr "Форматиране на дял %s"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start at boot"
-msgstr "Изпълнение при стартиране"
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "Моля, пробвайте мишката си"
+msgid "Hostname required"
+msgstr "Изисква име на машина"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "Настройка на мрежата"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselect fonts installed"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
-msgstr "Проследяване на ID на мрежовата карта (полезно при лаптопи)"
+msgid "Cancel"
+msgstr "Отказ"
 
-#: ../../network/network.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "Име на хост:"
+msgid "Searching for configured scanners ..."
+msgstr "Локален принтер"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Netmask"
-msgstr "Мрежова маска"
+msgid "Wheel"
+msgstr "Wheel"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "IP address"
-msgstr "IP адрес"
+msgid "Videocard"
+msgstr "Видео карта"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp/zeroconf)"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "Automatic IP"
-msgstr "Автоматичен IP адрес"
+msgid "Remove Selected"
+msgstr "Изтриване на оизбраните"
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (драйвер %s)"
+msgid "/Autodetect _modems"
+msgstr "/Автоматично открива _модеми"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "Настройка на мрежовото устройство %s"
+msgid "Remove printer"
+msgstr "Премахване на принтера"
 
-#: ../../network/network.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
 msgstr ""
-"Моля, въведете IP настройките за тази машина.\n"
-"Всяко устройство трябва да бъде въведено като IP адрес\n"
-"с точково-десетично означение (например, 1.2.3.4)."
+"ВНИМАНИЕ!\n"
+"\n"
+"DrakX трябва да прераздели Вашия Windows дял. Бъдете внимателни: тази "
+"операция е\n"
+"опасна. Ако още не сте го направили, трябва първо да пуснете scandisk (и\n"
+"евентуално да използвате defrag) под Windows върху този дял, тогава \n"
+"повторете инсталациаята. Би било добре да направите архив на данните си.\n"
+"Когато сте сигурни, натиснете ОК."
 
-#: ../../network/network.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "Which services would you like to allow the Internet to connect to?"
 msgstr ""
-"ВНИМАНИЕ: Това устройство вече е настроено да се свързва към Интернет.\n"
-"Просто приемете, за да оставите устройството настроено.\n"
-"Поправката на полетата по-долу ще презапише тази настройка."
 
-#: ../../network/shorewall.pm:1
-#, c-format
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
 msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
-"Внимание ! Открита е настройка на Защитна Стена. Може да се наложи някаква "
-"ръчна поправка след инсталацията."
+"Добре дошли в настройката на Proxy.\n"
+"\n"
+"Тук ще можете да установите вашите HTTP и FTP proxy\n"
+"със или без потребителско име и парола\n"
 
-#: ../../network/shorewall.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "Открита е настройка на Защитна Стена !"
+msgid "Other"
+msgstr "Друга"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "Парола на акаунта"
+msgid "Default"
+msgstr "По подразбиране"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Име на акаунта (потебителско име)"
+msgid "Button 2 Emulation"
+msgstr "Имитация на 2 бутона"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection timeout (in sec)"
-msgstr "Timeout на връзката (в сек)"
+msgid "type1inst building"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Connection speed"
-msgstr "Скорост на връзката"
+msgid "Abiword"
+msgstr "Abiword"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "Изберете файл"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "Режим на набиране"
+msgid "X server"
+msgstr "X сървър"
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose your country"
-msgstr "Изберете страната си"
+msgid "Domain Admin User Name"
+msgstr "Име на администратор на домейн"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "2-ри DNS на доставчика (по желание)"
+msgid "There was an error while scanning for TV channels"
+msgstr "Появи се грешка при сканиране за TV канали"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "1-ви DNS на доставчика (по желание)"
+msgid "US keyboard (international)"
+msgstr "US клавиатура (международна)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Provider phone number"
-msgstr "Телефонен номер на доставчика"
+msgid "Not installed"
+msgstr "Не е инсталиран"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "Име на доставчика (напр. provider.net)"
+msgid "LAN connection"
+msgstr "LAN връзка"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "Личния ви телефонен номер"
+msgid "/File/-"
+msgstr "/Файл/-"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "IO_1 на картата"
+msgid "Italian"
+msgstr "Италианска"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid "Card IO_0"
-msgstr "IO_0 на картата"
+msgid "Basic"
+msgstr "Базов"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Card IO"
-msgstr "IO на картата"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
+msgstr ""
+"\n"
+" Авторски права (C) 2002 от MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Card mem (DMA)"
-msgstr "Памет (DMA) на картата"
+msgid "Honduras"
+msgstr "Хондурас"
+
+#: ../../help.pm:1
+#, c-format
+msgid "pdq"
+msgstr ""
 
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Card IRQ"
-msgstr "IRQ на картата"
+msgid "Card IO"
+msgstr "IO на картата"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Please fill or check the field below"
-msgstr "Моля, попълнете или проверете полето по-долу"
+msgid "when checked, owner and group won't be changed"
+msgstr "при проверка, собственика и групата няма да бъдат променени"
 
-#: ../../network/tools.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "Настройка на връзката"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"Тази специална стартираща\n"
+"ивица на дяла е за двойно\n"
+"стартиране на системата ви.\n"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr ""
-"Системата не изглежда свързана към Интернет.\n"
-"Опитайте се да пренастроите връзката."
+"Моля, изберете за всяка стъпка, дали ще се преиграе като при инсталацията, "
+"или ще бъде ръчна"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "За ваша сигурност, сега тя ще бъдете отвързана."
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The system is now connected to the Internet."
-msgstr "Системата в момента е свързана към Интернет."
+msgid "\t-Network by FTP.\n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "Изпробване на връзката..."
+msgid "Russian (Yawerty)"
+msgstr "Руска (Yawerty)"
 
-#: ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "Искате ли сега да опитате връзка към Интернет ?"
+msgid "You must enter a device or file name!"
+msgstr "Вие трябва да въведете устройство или име на файл!"
 
-#: ../../network/tools.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Internet configuration"
-msgstr "Настройка на Интернет"
+msgid "/_Quit"
+msgstr "/_Излиза"
 
-#: ../../partition_table/raw.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
 msgstr ""
-"Нещо лошо става с устройството ви.\n"
-"Теста за целост на данните пропадна.\n"
-"Това значи, че писането на каквото и било по диска ще превръща\n"
-"произволно в боклук"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid " (Default)"
-msgstr " (По подразбиране)"
+msgid "Graphics memory: %s kB\n"
+msgstr "Графична памет: %s kB\n"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "On CUPS server \"%s\""
-msgstr "На CUPS сървър \"%s\""
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Printers"
-msgstr "Отдалечен принтер"
+msgid "access to compilation tools"
+msgstr "достъп до инструменти за компилация"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "CUPS"
-msgstr "CUPS"
+msgid "Please select data to restore..."
+msgstr "Моля, изберете данни за възстановяване..."
 
-#: ../../printer/cups.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "(on this machine)"
-msgstr "(на тази машина)"
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"Ако смятате да използвате aboot, оставете свободно пространство (2048 "
+"сектора\n"
+"са достатъчни) в началото на диска"
 
-#: ../../printer/cups.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "(on %s)"
-msgstr "(на %s)"
+msgid "Standard test page"
+msgstr "Стандартна тестова страница"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr "CUPS - Обща Unix Принтерна Система"
+msgid "Create"
+msgstr "Създай"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LPRng"
-msgstr "LPRng"
+msgid "What"
+msgstr "Какво"
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "LPRng - LPR New Generation"
-msgstr "LPRng - LPR Ново поколение"
+msgid "There was an error ordering packages:"
+msgstr "Появи се грешка при поръчването на пакетите:"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "LPD"
-msgstr "LPD"
+msgid "Bulgarian (BDS)"
+msgstr "Българска (BDS)"
 
-#: ../../printer/data.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
-msgstr "LPD - Линеен Принтерен Демон"
+msgid "Disable Server"
+msgstr "Изключва Сървър"
 
-#: ../../printer/data.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "PDQ"
-msgstr "PDQ"
+msgid "Filesystem encryption key"
+msgstr "Криптиращ ключ за файлова система"
 
-#: ../../printer/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr "PDQ - Печатай, Без Опашка"
+msgid "Gujarati"
+msgstr "Гуаджарати"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Unknown Model"
-msgstr "Неизвестен Модел"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
+msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Unknown model"
-msgstr "Неизвестен модел"
+msgid "Save theme"
+msgstr "Запазва тема"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Порт"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "group"
+msgstr "група"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Host %s"
-msgstr "Хост %s"
+msgid "Brazil"
+msgstr "Бразилия"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Network %s"
-msgstr "Мрежа %s"
+msgid "Auto Install"
+msgstr "Автоматично Инсталира"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Interface \"%s\""
-msgstr "Интерфейс \"%s\""
+msgid "Network Configuration Wizard"
+msgstr "Магьосник за настройка на мрежата"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Local network(s)"
-msgstr "Локална мрежа(и)"
+msgid "Removable media automounting"
+msgstr "Автоматично монтиране на сменяем носител"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr "'Raw' принтер (Без драйвер)"
+msgid "Printing"
+msgstr "Печатане"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ", using command %s"
-msgstr ", използва команда %s"
+msgid "Unkown driver"
+msgstr "Неизвестен драйвер"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr " на Novell сървър \"%s\", принтер \"%s\""
+msgid ""
+"There are no printers found which are directly connected to your machine"
+msgstr "Няма намерени принтери включени директно към машината ви"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
-msgstr " на SMB/Windows сървър \"%s\", поделен \"%s\""
+msgid "Create a new partition"
+msgstr "Създай нов дял"
 
-#: ../../printer/main.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
-msgstr ", TCP/IP хост \"%s\", порт %s"
+msgid "Driver:"
+msgstr "Драйвер: "
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "unknown"
+msgstr "Неизвестен модел"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
-msgstr " на LPD сървър \"%s\", принтер \"%s\""
+msgid "Use fdisk"
+msgstr "Използвай fdisk"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ", printing to %s"
-msgstr ", печат на %s"
+msgid "MOVE YOUR WHEEL!"
+msgstr "БУТНЕТЕ ТОПЧЕТО !"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ", multi-function device"
-msgstr ", многофункционално устройство"
+msgid "sent: "
+msgstr "изпраща: "
 
-#: ../../printer/main.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ", многофункционално устройство на HP JetDirect"
+msgid "Automatic IP"
+msgstr "Автоматичен IP адрес"
 
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
+msgstr ""
+"А така ! Инсталацията е завършена и GNU/Linux системата ви е готова за\n"
+"употреба. Просто цъкнете \"OK\", за да рестартирате системата. Можете да\n"
+"стартирате GNU/Linux или Windows, което предпочитате (ако имате две "
+"системи),\n"
+"веднага след като компютърът стартира отново.\n"
+"\n"
+"Бутона \"Напредничав\" (само в \"Експертен\") показва още два бутона за:\n"
+"\n"
+" * \"генериране на дискета за автоматична инсталация\": за да създадете\n"
+"инсталационна дискета, която след това автоматично да изчършва цялата\n"
+"инсталация без помощта на оператор, приличаща на инсталацията, която току-"
+"що\n"
+"сте извършили.\n"
+"\n"
+"   Отбележете, че две различни опции са достъни, чрез цъкане на бутона:\n"
+"\n"
+"    * \"Преиграй\". Това е частично автоматизирана инсталация като стъпките\n"
+"по разделяне на дялове остават интерактивни.\n"
+"\n"
+"    * \"Автоматична\". Напълно автоматична инсталация: твърдият диск се\n"
+"презаписва напълно, всякакви данни се загубват.\n"
+"\n"
+"   Тази особеност е много удобна, когато инсталирате голям брой подобно\n"
+"машини. Вижте секцията за автоматична инсталация на нашия web-сайт.\n"
+"\n"
+"    * \"Запази избора на пакети\"(*): запазва избора на пакети, така както "
+"е\n"
+"направен преди. Когато правите друга инсталация, вкарайте дискетата в\n"
+"устройството и пуснете инсталацията да върви чрез помощния екран, като\n"
+"натиснете клавиша [F1] и като напишете >>linux defcfg=\"floppy\"<<.\n"
+"\n"
+"(*) Трябва ви FAT-форматирана дискета (за да създадете таква под GNU/Linux,\n"
+"напишете \"mformat a:\")"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid ", multi-function device on USB"
-msgstr ", многофункционално устройство на USB"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington THinking Mouse"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
-msgstr ", многофункционално устройство на на паралелен порт \\#%s"
+msgid "Configuration of a remote printer"
+msgstr "Настройка на отдалечен принтер"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", USB printer"
-msgstr ", USB принтер"
+msgid "Moldova"
+msgstr "Молдова"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ", USB printer \\#%s"
-msgstr ", USB принтер \\#%s"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr ""
+"Моля, проверете дали искте да изтриете лентата преди да правите резервно "
+"копие."
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid " on parallel port \\#%s"
-msgstr " на паралелен порт \\#%s"
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Local Printers"
-msgstr "Локални принтери"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "URL трябва да е започва с 'ftp:' или 'http:'"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Pipe job into a command"
-msgstr "Прекарай заданието през команда"
+msgid "Add a new rule at the end"
+msgstr "Добавя ново правило на края"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Enter a printer device URI"
-msgstr "Въведете URI на печатащо устройство"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
+msgstr ""
+"Вие също решавате, дали принтерите на отдалечените машини ще бъдат "
+"автоматично достъпни на тази машина."
 
-#: ../../printer/main.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Printer on NetWare server"
-msgstr "Принтер на NetWare сървър"
+msgid ""
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"Сега можете да подадете опциите му до модула %s.\n"
+"Опциите са във формат ``име=стойност име2=стойност2 ...''.\n"
+"Например: ``io=0x300 irq=7''"
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "Принтер на SMB/Windows 95/98/NT сървър"
+msgid "Quit without writing the partition table?"
+msgstr "Изход, без да запис на таблицата на дяловете ?"
 
-#: ../../printer/main.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "Мрежов принтер (TCP/Socket)"
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Printer on remote lpd server"
-msgstr "Принтер на отдалечен LPD сървър"
+msgid "Installing packages..."
+msgstr "Инсталиране на пакети ..."
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Принтер на отдалечен CUPS сървър"
+msgid "Dutch"
+msgstr "Холандска"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Remote printer"
-msgstr "Отдалечен принтер"
+msgid "The following packages need to be installed:\n"
+msgstr "Следните пакети ще трябва да се инсталират:\n"
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "Локален принтер"
+msgid "Angola"
+msgstr "Ангола"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Configuring applications..."
-msgstr "Настройка на приложения..."
+msgid "service setting"
+msgstr "установяване на обслужвания"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Printerdrake"
-msgstr "Printerdrake"
+msgid "Custom"
+msgstr "Клиентска"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "Изтриване на принтер \"%s\"..."
+msgid "File is already used by another loopback, choose another one"
+msgstr "Файлът вече се използва то друг loopback, изберете друг файл."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "Наистина ли искате да премахнете принтера \"%s\" ?"
+msgid "Read-only"
+msgstr "Само за четене"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Remove printer"
-msgstr "Премахване на принтера"
+msgid "Latvia"
+msgstr "Латвия"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Learn how to use this printer"
-msgstr "Научете как да изпозлвате този принтер"
+msgid "No known driver"
+msgstr "Няма известен драйвер"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Print test pages"
-msgstr "Отпечатване на тестови страници"
+msgid "1 MB"
+msgstr "1 МБ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
-"Неспешно премахване на принтер \"%s\" от Star Office/OpenOffice.org/GIMP."
+"Ако той не е този който искате да конфигурирате, въведете име на устройство/"
+"име на файл във входното поле"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksound:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
-msgstr "Принтерът  \"%s\" беше успешно премахнат от ffice/OpenOffice.org/GIMP."
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Премахвам принтер от Star Office/OpenOffice.org/GIMP"
+msgid "Configure Local Area Network..."
+msgstr "Настойка на локална мрежа ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
-msgstr "Премахва този принтер от Star Office/OpenOffice.org/GIMP"
+msgid "Launch the sound system on your machine"
+msgstr "Пуснкане звуковата система на машината ви"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Неуспех при добавяне на принтер \"%s\" на Star Office/OpenOffice.org/GIMP."
+msgid "Preparing printer database..."
+msgstr "Подготвяне на базата данни от принтери ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-"Принтерът \"%s\" е бил успешно добавен към Star Office/OpenOffice.org/GIMP."
+msgid "Information"
+msgstr "Информация"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Добавяне на принтер на Star Office/OpenOffice.org/GIMP"
+msgid "No network card"
+msgstr "Няма открита мрежова карта"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
-msgstr "Добавя този принтер на Star Office/OpenOffice.org/GIMP"
+msgid "Which filesystem do you want?"
+msgstr "Коя файлова система искате ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr "Принтерът \"%s\" вече е определен за ползване по подразбиране."
+msgid "3 buttons"
+msgstr "3 бутона"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Default printer"
-msgstr "Принтер по подразбиране"
+msgid "Detailed information"
+msgstr "Подробна информация"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set this printer as the default"
-msgstr "Определи този принтер за ползване по подразбиране"
+msgid "Malta"
+msgstr "Малта"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "Опции на принтера"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
+msgstr ""
+"Настройки на принтера по подразбиране\n"
+"\n"
+"Трябва да сте сигурни, че големината на страницата\n"
+"и типа на мастилото (ако има) са настроени правилно.\n"
+"Отбележете, че при много високо качесто на изхода на\n"
+"принтера, той може значително да се забави."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
-msgstr "Производител на принтера, модел"
+msgid "This floppy is not FAT formatted"
+msgstr "Тази дискета не е форматирана на FAT"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr "Производител на принтера, модел, драйвер"
+msgid "Configuring network"
+msgstr "Настойка на мрежата"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "Изтриване на стар принтер \"%s\"..."
+msgid "Graphic Card"
+msgstr "Графична карта"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Printer name, description, location"
-msgstr "Име на принтера, описание, местоположение"
+msgid "Resizing Windows partition"
+msgstr "Изчислявам границите на Windows файловата система"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Printer connection type"
-msgstr "Тип на връзката към принтера"
+msgid "Provider dns 1 (optional)"
+msgstr "1-ви DNS на доставчика (по желание)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Raw printer"
-msgstr "Raw принтер"
+msgid "Cameroon"
+msgstr "Камерун"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do it!"
-msgstr "Направи го!"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"Сега можете да разделите %s.\n"
+"Когато сте готови, не забравяйте да запишете използвайки `w'"
 
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
 #: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
@@ -10347,450 +10311,339 @@ msgstr "Направи го!"
 msgid "Close"
 msgstr "Затвори"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
-"Принтер %s\n"
-"Какво искате да поправите по този принтер ?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Modify printer configuration"
-msgstr "Поправи настройките на принтер"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Add a new printer"
-msgstr "Добави нов принтер"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Normal Mode"
-msgstr "Нормален режим"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Change the printing system"
-msgstr "Промяна системата за печат"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "CUPS configuration"
-msgstr "CUPS конфигурация"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Calendar"
+msgstr "Календар"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Display all available remote CUPS printers"
+msgid ""
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
-"Следните принтери са настроени. Цъкнете на един от тях, за да го редактирате "
-"или за да получите информация за него."
+"За да използвате отдалечен lpd принтер, трябва да предоставите имената на "
+"хоста на принтерния сървър и името на принтера на този сървър."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printing system: "
-msgstr "Печатна система: "
+msgid "Iceland"
+msgstr "Исландия"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Checking installed software..."
-msgstr "Проверка на инсталирания софтуер..."
+msgid "consolehelper missing"
+msgstr "липсва помощ на конзола"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Installing Foomatic..."
-msgstr "Инсталиране на Foomatic..."
+msgid "stopped"
+msgstr "спряна"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "ННеуспешна настройка на принтер \"%s\"!"
+msgid "Whether the FPU has an irq vector"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "Настройка на принтера \"%s\"..."
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Reading printer data..."
-msgstr "Четене на данни от принтера ..."
+msgid "Expand Tree"
+msgstr "Разшири дървото"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "Коя принтерна система (spooler) изкате да използвате ?"
+msgid ""
+"The old \"%s\" driver is blacklisted.\n"
+"\n"
+"It has been reported to oops the kernel on unloading.\n"
+"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select Printer Spooler"
-msgstr "Изберете принтерен spooler"
+msgid "Expert Mode"
+msgstr "Разширени функиции"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "Принтер по подразбиране"
+#, c-format
+msgid "Printer options"
+msgstr "Опции на принтера"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Installing %s ..."
-msgstr "Инсталира %s ..."
+msgid "Local Network adress"
+msgstr "Адрес на Локална мрежа"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Removing %s ..."
-msgstr "Изтриване на %s ..."
+msgid "Backup your System files. (/etc directory)"
+msgstr "Резервно копие на вашите системни файлове (/etc директория)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
 "\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
 "\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+"Do you want to install the updates ?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Starting the printing system at boot time"
-msgstr "Стартиране на принтерната система при стартиране"
+msgid "Samba Server"
+msgstr "Samba Сървър"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr "Инсталиране на принтерната система в %s ниво на сигурност"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "paranoid"
-msgstr "параноично"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "high"
-msgstr "високо"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Restarting printing system..."
-msgstr "Рестартиране на принтерната система"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Configuration of a remote printer"
-msgstr "Настройка на отдалечен принтер"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Australian Optus cable TV"
 msgstr ""
-"Нямаше достъп до мрежата и такъв не можеше да бъде установен. Моля, "
-"проверете настройката и хардуера си. Тогава опитайте да настроите "
-"отдалечения принтер отново."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr ""
+"  <Tab>/<Alt-Tab> между елементите  | <Space> избира  | <F12> следващ екран"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configure the network now"
-msgstr "В момента настройвам мрежата"
+msgid "Subnet:"
+msgstr "Подмрежа:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Go on without configuring the network"
-msgstr "Продължи без настойка на мрежата"
+msgid "Zimbabwe"
+msgstr "Зимбабве"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
-msgstr ""
+msgid "Please enter the host name or IP."
+msgstr "Моля, въведете име на хост или IP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network functionality not configured"
-msgstr "Функционалността на мрежата не е настроена"
+msgid "When"
+msgstr "Кога"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Starting network..."
-msgstr "Стартиране мрежата ...."
+msgid "Second DNS Server (optional)"
+msgstr "Втори DNS сървър (по избор)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Refreshing printer data..."
-msgstr "Опресняване на данните от принтера ..."
+msgid "Finland"
+msgstr "Финландия"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Arguments: (arg)\n"
+"\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
-"Прехвърлили сте принтер по подразбиране (\"%s\"), Искате ли да го оставите "
-"по подразбиране в новата принтерна система %s ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Transfer printer configuration"
-msgstr "Пренос на настройка на принтер"
+msgid "Color depth: %s\n"
+msgstr "Дълбочина на цвета: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Transferring %s..."
-msgstr "Прехвърляне на %s ..."
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "Не можете да изключите този пакет. Той трябва да бъде обновен"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "New printer name"
-msgstr "Ново име на принтер"
+msgid "Loading from floppy"
+msgstr "Зареждане от дискета"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
-"Принтерът \"%s\" вече съществува,\n"
-"наистина ли искате да презапишете настройката ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr "Името на принтера трябва да съдържа само букви, числа и подчертавка"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
+msgstr "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Transfer"
-msgstr "Прехвърли"
+msgid "Slovenia"
+msgstr "Словения"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"Enter a user\n"
+"%s"
 msgstr ""
-"Принтер с име \"%s\" вече съществува в %s.\n"
-"Цъкнете \"Прехвърли\", за да го презапишете.\n"
-"Можете също така да напишете ново име или да пропуснте принтера."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not transfer printers"
-msgstr "Не прехвърляй принтери"
+"Въведете потребител\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
-"\n"
-"Отбележете принтерите, които искате да прехвърлите и цъкнете\n"
-"\"Прехвърли\"."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
-msgstr ""
-"\n"
-"Също така, принтери настроени с PPD файлове предоставени от производителите "
-"им или с оригинални CUPS драйвери не могат да бъдат прехвърляни."
+msgid "ProgressBar color selection"
+msgstr "Избор на цвят за лентата на прогрес"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
-"Като допълнение, опашките не създадени с тази програма или \"foomatic-"
-"configure\" не могат да бъдат прехвърляни."
+"Това са различните записи.\n"
+"Можете да добавите още или да промените съществуващите."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr "LPD и LPRng не поддържа IPP принтери.\n"
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
-"PDQ поддържа само локални принтери, отдалечени LPD принтери и Socket/TCP "
-"принтери.\n"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
-"CUPS не поддържа принтери на Novell сървъри или принтери изпращащи данни във "
-"свободно-изградена команда.\n"
+"Пуска команди по разписание във време определено от командата at и пуска\n"
+"набор от други, когато натовареността спадне достатъчно."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
-"Можете да копирате настройките на принтера, които сте извършили за spoller %"
-"s на %s, текущия spooler. Цялата информация за настройките (име не принтер, "
-"описание, местоположение, вид на връзката и настройки по подразбиране) се "
-"презаписват, но работите не се прехвърлят.\n"
-"Не всички опашки могат да бъдат прехвърлени по следните причини:\n"
+msgid "Radio support:"
+msgstr "Подръжка на радио:"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "Installing SANE packages..."
+msgstr "Инсталиране на SANE пакети ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+msgid "boot disk creation"
+msgstr "съдаване на стартираща дискета"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "Отпечатване на тестов(ата/ите) страниц(а/и) ..."
+msgid "LDAP"
+msgstr "LDAP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Print option list"
-msgstr "Списък с принтерни опции"
+msgid "SILO"
+msgstr "SILO"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/removable.pm:1
 #, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "Печатане на принтер \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "Печатане на принтер \"%s\""
+msgid "Change type"
+msgstr "Промяни типа"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "Печатан/Сканиранее на \"%s\""
+msgid "SILO Installation"
+msgstr "SILO инсталация"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "Печатане/Сканиране/Фото картички на принтер \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
-"\n"
+msgid "Use CD/DVDROM to backup"
 msgstr ""
-"За да видите списък на достъпните опции за текущия принтер, или прочетете "
-"списъка показан по-долу или цъкнете на бутона \"Списък с опции за печат\".%s%"
-"s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_messages.pm:1
 #, c-format
 msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
 "\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
+"Поздравления, инсталацията е преключена.\n"
+"Премахнете стартовото устройство и натисене Enter за да рестартирайте.\n"
 "\n"
-"Командите \"%s\" и \"%s\" също така позволяват да поправяте избраните "
-"настройки за определена работа на принтера. Просто добавете исканите "
-"настройки към командния ред, напр. \"%s <file>\".\n"
+"\n"
+"За информация относно поправки, на тази версия на Mandrake Linux,\n"
+"се консултирайте с Errata, на адрес : \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Информация за настройване на системата ви можете да намерите в\n"
+"слединсталационната глава от Official Mandrake Linux User's Guide."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "paranoid"
+msgstr "параноично"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Send mail report after each backup to:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10804,275 +10657,220 @@ msgstr ""
 "печатните диалози в много приложения. Но тук не поставяйте името на файла, "
 "защото то се подава от приложението.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
-"За да отпечатате файл от командния ред (терминален прозорец), използвайте "
-"командата \"%s <file>\" или \"%s <file>\".\n"
+msgid "Resolution"
+msgstr "Разделителна способност"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
 msgstr ""
-"За да видите списък с достъпните опции за текущия принтер, цъкнете на бутона "
-"\"Списък с опции за печат\"."
+"За да печатате на SMB принтер, трябва да дадете името\n"
+"на SMB хоста (Забележка ! То може да е различно от TCP/IP хоста !)\n"
+"и възможно IP адреса на принтерския сървър, както и общото име на\n"
+"принтера, до който искате достъп и подходящо имен, парола и информация\n"
+"за работната група."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+" Accept/Refuse icmp echo."
 msgstr ""
+"Arguments: (arg)\n"
 "\n"
-"Командата \"%s\" също така ви позволява да поправите настройките на опциите "
-"за определена работа на принтера. Просто добавете целаните настройки към "
-"командния ред, напр. \"%s <file>\". "
+"Позволява/Забранява icmp echo."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
-msgstr ""
-"За да изпечатате файл от командния ред (терминален прозорец) използвайте "
-"командата \"%s <file>\".\n"
+msgid "reconfigure"
+msgstr "пренастройка"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
-"Това е списък от налични за печат опции отнасящи се за текущият принтер:\n"
-"\n"
+"Картата ви може да има поддръжка на хардуерно 3D ускорение с XFree %s.\n"
+"ОТБЕЛЕЖЕТЕ, ЧЕ ТОВА Е ЕКСПЕРИМЕНТАЛНА ПОДДРЪЖКА И КОМПЮТЪРЪТ ВИ МОЖЕ ДА "
+"ЗАБИЕ."
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Xinetd Service"
+msgstr "Xinetd обслужване"
+
+#: ../../any.pm:1
+#, c-format
+msgid "access to network tools"
+msgstr "достъп до мрежови инструменти"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
-"Можете да използвате тази команда и в полето \"Команда за печат\" на "
-"печатните диалози в мноѓо приложения. Но тўк не поставяйте името на файла, "
-"защото то се подава от приложението.\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
-"За да изпечатате файл от командния ред (терминален прозорец), можете или да "
-"използвате командата \"%s <file>\" или графичния печатащ инструмент: \"xpp "
-"<file>\" или \"kprinter <file>\". Графичните инструменти ви позволяват да "
-"избирате принтера и да поправяте лесно настройките на опциите.\n"
+"Mandrake Linux 9.1 ви ппозволява да получите най-последните версии на "
+"софтуера, да слушате музикални файлове, да обработвате фото и графични "
+"файлове, както и да гледате видео."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Did it work properly?"
-msgstr "Проработи ли както трябва ?"
+msgid "Here is a list of all auto-detected printers. "
+msgstr "Това е списък на автоматично открити принтери."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
-"Тестовите страници са изпратени към принтерна.\n"
-"Може да отнеме малко време преди принтера да започне.\n"
+"Грешка при инсталиране на aboot, \n"
+"да се опитам ли да продължа инсталацията дори, ако това унижтожи първия дял ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
+"Options Description:\n"
 "\n"
-msgstr ""
-"Тестовите страници са изпратени към принтера.\n"
-"Може да отнеме малко време преди принтера да започне.\n"
-"Състояние на печата:\n"
-"%s\n"
+" In this step Drakbackup allow you to change:\n"
 "\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
+"\n"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Do not print any test page"
-msgstr "Не печати никаква тестова страница"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo test page"
-msgstr "Тестова страница със снимка"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Alternative test page (A4)"
-msgstr "Алтернативна тестова страница (А4)"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative test page (Letter)"
-msgstr "Алтернативна тестова страница (Писмо)"
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr ""
+"Възстановява избраните\n"
+"файлове"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Standard test page"
-msgstr "Стандартна тестова страница"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Print"
-msgstr "Печат"
+msgid "Please fill or check the field below"
+msgstr "Моля, попълнете или проверете полето по-долу"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "No test pages"
-msgstr "Без тестови страници"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "Искате ли да запазите промените в /etc/fstab"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
-msgstr ""
-"Моля, изберете тестова страница за печат.\n"
-"Забележка: тестовата страница за снимка може да отнеме доста дълго\n"
-"време да се изпечата и на лазерни принтери с малко памет може въобще\n"
-"да не излезе. В повечето случаи е достатъчна стандартна тестова страница."
+msgid "Boot Protocol"
+msgstr "Стартиращ протокол"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Test pages"
-msgstr "Тестови страници"
+msgid "LVM-disks %s\n"
+msgstr "LVM-дискове %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr ""
-"Искате ли да настроите този принтер (\"%s\")\n"
-"като принтер по подразбиране ?"
+msgid "The package %s is needed. Install it?"
+msgstr "Пакет %s е необходим. Да го инсталирам?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Option %s out of range!"
-msgstr "Опцията %s е извън границите !"
+msgid "On boot"
+msgstr "При зареждане"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr "Настройката %s трябва да е число !"
+msgid "Bus identification"
+msgstr "Идентификация на шина"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
-msgstr "Настройката %s трябва да е цяло число !"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "Избор модел на принтера"
+msgid "Please make a backup of your data first"
+msgstr "Първо създайте backup на своите данни"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
-msgstr ""
-"Настройки на принтера по подразбиране\n"
-"\n"
-"Трябва да сте сигурни, че големината на страницата\n"
-"и типа на мастилото (ако има) са настроени правилно.\n"
-"Отбележете, че при много високо качесто на изхода на\n"
-"принтера, той може значително да се забави."
+msgid "Vatican"
+msgstr "Ватикана"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
-msgstr ""
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "имате повече от един твърди дискове, кой да използвам за инсталацията?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "Настройка на Lexmark inkjet"
+msgid "Eritrea"
+msgstr "Еритрея"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
-msgstr ""
-"Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални "
-"принтери, без принтери на отдалечени машини или принтерни машини. Моля, "
-"свържете принтера си на локален порт или го настройте на машината, към която "
-"е свързан."
+msgid "Remove List"
+msgstr "Изтрива списък"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "OKI winprinter configuration"
-msgstr "Настройки на OKI Winprinter"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr "Ако вашият принтер не е в списъка, изберете съвместим или подобен."
+msgid "Inuktitut"
+msgstr "Инуктитут"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
-msgstr ""
+msgid "Morocco"
+msgstr "Мароко"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
@@ -11081,1433 +10879,1180 @@ msgstr "Какъв модел принтер имате ?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer model selection"
-msgstr "Избор модел на принтера"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Reading printer database..."
-msgstr "Четене на базата данни от принтери ..."
+msgid "Add a new printer"
+msgstr "Добави нов принтер"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Select model manually"
-msgstr "Избор на модел ръчно"
+msgid "          All of your selected data have been          "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "The model is correct"
-msgstr "Този модел е правилен"
+msgid "<-- Delete"
+msgstr "<-- Изтрива"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Nepal"
+msgstr "Непал"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Your printer model"
-msgstr "Вашият модел принтер"
+msgid "cpu # "
+msgstr "cpu # "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Preparing printer database..."
-msgstr "Подготвяне на базата данни от принтери ..."
+msgid "chunk size"
+msgstr "големина на парчето"
 
-#: ../../printer/printerdrake.pm:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Location"
-msgstr "Местоположение"
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "командите преди стартиране, или 'c' за команден ред."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Description"
-msgstr "Описание"
+msgid "Problems installing package %s"
+msgstr "Проблеми с инсталирането на пакета %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Name of printer"
-msgstr "Име на принтер"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr "Вие ще получите тревога ако натоварването е по-високо от тази стойност"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
 msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
-"Всеки принтер се нуждае от име (например \"printer\"). Полетата Описание и "
-"Местоположе не трябва да бъдат попълвани. Има коментари за потребителите."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Enter Printer Name and Comments"
-msgstr "Въведете име на принтер и коментар"
+msgid "Add a scanner manually"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Making printer port available for CUPS..."
-msgstr "Прави порта на принтера наличен за CUPS..."
+msgid "Reload partition table"
+msgstr "Презареди таблицата с дяловете"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr "Проверка на устройство и конфигурация за HPOJ..."
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "Да, искам autologin с това (потребител, десктоп)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Search for fonts in installed list"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Scanning on your HP multi-function device"
-msgstr "Сканира на вашето HP многофункционално устройство"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Installing mtools packages..."
-msgstr "Инсталиране на mtools пакети..."
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Installing SANE packages..."
-msgstr "Инсталиране на SANE пакети ..."
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "Главен"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Installing HPOJ package..."
-msgstr "Инсталиране на HPOJ пакети ..."
+msgid "Tuner type:"
+msgstr "Тип на тунер:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
-"Дали вашият принтер е многофункционално устройство от HP или Sony "
-"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 със скенер, Sony IJP-"
-"V100), HP PhotoSmart или HP LaserJet 2200?"
+"Дойде времето да изберете система за печат за вашия компютър.Другите\n"
+"операционни системи може да ви предлагат една,но ние ви предлагаме две.\n"
+"Всяка от тях е пригодена за даден тип конфигурация.\n"
+"\n"
+" * \"%s\"-- е акроним на \"print,don't queue\"(\"пачатай,не чакай\"),е "
+"идеалният\n"
+"избор,ако имате директна връзка с принтера,искате да го контролирате,или\n"
+"нямате мрежови принтери.(\"%s\" може да работи само в много прости\n"
+"ситуации и е някак бавен,когато се ползва в мрежа.) Препоръчително е да \n"
+"изполвате \"pdq\" ако нямате опит с GNU/Linux. \n"
+" * \"%s\" - `` Common Unix Printing System``(обичайна система за печат за "
+"Unix)\n"
+"е отличен избор,за печат както на собствения ви принтер,така и на друг,на\n"
+"половин свят разстояние.Тя е лесна за конфигуриране и може работи като\n"
+"клиент или сървър на архаичната\"lpd \",което я прави напълно съвместима\n"
+"с по-стари операционни системи,които може все още да се нуждаят от тази\n"
+"услуга.Въпреки че е доста мощна,основната инсталация е почти толкова \n"
+"лесна,колкото и тази на \"pdq\".Ако искате да емулирате \"lpd\" сървър,\n"
+"уверете се,че \"cups-lpd\" демона е пуснат.\"%s\" включва графични \n"
+"интерфейси за пречат и избор на опции за принтера,както и за\n"
+"конфигурирането му.\n"
+"\n"
+"Ако сега направите избор,а по-късно разберете,че не харесвате системата\n"
+"си за печат,можете да я смените като пуснете PrinterDrake от Мандрейк \n"
+"контролия център и цъкнете на \"експерт\"."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "A command line must be entered!"
-msgstr "Трябва да бъде въведен команден ред!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Command line"
-msgstr "Команден ред"
+msgid "\"Menu\" key"
+msgstr "\"Menu\" клавиш"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Pipe into command"
-msgstr "Програмен канал към команда"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Detected model: %s %s"
-msgstr "Открит модел: %s %s"
+msgid "Security Administrator:"
+msgstr "Администратор по защита:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A valid URI must be entered!"
-msgstr "Трябва да бъде въведен валиден URI!"
+msgid "Please enter your login"
+msgstr "Моля, въведете вашият логин"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "Печатащо устройство URI"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
-"Трябва директно да определите URI за достъп до принтера. URI трябва да "
-"изпълни или CUPS или Foomatic спецификациите. Отбележете, че не всички "
-"типове URI се поддрържат от spooler-ите."
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Port"
-msgstr "Порт"
+"Нямате Internet връзка.\n"
+"Създайте такава, като цъкнете на 'Настрой'"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Printer host name or IP"
-msgstr "Име на хост за принтера или IP"
+msgid "Fonts copy"
+msgstr "Копира шрифтове"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The port number should be an integer!"
-msgstr "Номерът на порта трябва да е цяло число !"
+msgid "Automated"
+msgstr "Автоматизиран"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid "Printer host name or IP missing!"
-msgstr "Липсва име на хост на принтерa или IP!"
+msgid "Do you want to test the configuration?"
+msgstr "Искате ли да тествате настройките?"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"За да печатате на socket или TCP принтер, трябва да предоставите името на "
-"хоста на принтера и, евентуално, номер на порт. На HP JetDirect сървъри, "
-"номерът на порта обикновенно е 9100, на други сървъри може да варира. Вижте "
-"ръковоството на хардуера си."
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr "Принтерът  \"%s\" беше успешно премахнат от ffice/OpenOffice.org/GIMP."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
+"\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
+"\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
+"\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
+"\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
-"Изберете един от автоматично откритите принтери в списъка горе или въведете "
-"име на хост или IP и опционално номер на порт (подразбиращ 9100) в полето."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "TCP/Socket Опции на принтер"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Host \"%s\", port %s"
-msgstr "Хост \"%s\", порт %s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", host \"%s\", port %s"
-msgstr ", хост \"%s\", порт %s"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Scanning network..."
-msgstr "Стартиране мрежата...."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer auto-detection"
-msgstr "Автоматично открива принтер"
+msgid "Save packages selection"
+msgstr "Запази избор на пакети"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "NCP queue name missing!"
-msgstr "Липсва име на NCP опашка !"
+msgid "Remove the last item"
+msgstr "Изтрива последният обект"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "NCP server name missing!"
-msgstr "Липсва име на NCP сървър !"
+msgid "User list to restore (only the most recent date per user is important)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Print Queue Name"
-msgstr "Име на печатната опашката"
+msgid "No net boot images created!"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Printer Server"
-msgstr "Сървър на принтера"
+msgid "use pptp"
+msgstr "използвай PPPTP"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"За да печатите на NetWare принтер ,трябва да знаете имео му и възможно\n"
-"адреса на сървъра, както и името на опашката,потребителското име,парола. "
-"(забележка! той може да е различен от TCP/IP име на хост!)"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "Избира услугите, които трябва да се пуснат при пускане на машината"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "Опции за NetWare принтер"
+msgid "Learn how to use this printer"
+msgstr "Научете как да изпозлвате този принтер"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
-msgstr ""
-"Свързва вашият принтер към Linux сървър и позволява Windows машини да се "
-"свързват към него като клиенти.\n"
-"\n"
-"Искате ли, да продължите настройките за този принтер както правехте до сега?"
+msgid "Configure the network now"
+msgstr "В момента настройвам мрежата"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "Изберете огледален сървър,от който да получите пакетите"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
-"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
-"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
-"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
+"Не възможност за работа с вашия FAT дял, \n"
+"поради получената грешка: %s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SECURITY WARNING!"
-msgstr "ПРЕДУПРЕЖДЕНИЕ ЗА СИГУРНОСТ!"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Samba share name missing!"
-msgstr "Липсва име на SAMBA share !"
+msgid "Which sector do you want to move it to?"
+msgstr "На кой сектор искате да го преместите?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
-msgstr "Трябва да бъдат зададени и името и IP адреса на сървъра !"
+msgid "Do you want to click on this button?"
+msgstr "Искате ли да цъкнете на този бутон?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Auto-detected"
-msgstr "Автоматично засечен"
+msgid "Bahamas"
+msgstr "Бахами"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "Работна група"
+msgid "Manual configuration"
+msgstr "Ръчна настройка"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Share name"
-msgstr "Общо име"
+msgid "search"
+msgstr "търси"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "SMB server IP"
-msgstr "IP на SMB сървър:"
+msgid ""
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
+msgstr ""
+"Този пакет зарежда маркираната клавиатурна наредба в /etc/sysconfig/"
+"keyboard.\n"
+"Тя може да бъде избрана с инструмента kbdconfig. Трябва да оставите "
+"товавключено за повечето машини."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "SMB server host"
-msgstr "Хост на SMB сървър"
+msgid "Xpmac (installation display driver)"
+msgstr "Xpmac (инсталация графичен драйвер)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
+msgid "Zeroconf host name must not contain a ."
 msgstr ""
-" Ако желаният принтер е открит автоматично, просто изберете го от списъка и "
-"тогава добавете име на потребител, парола, и/или работна група ако е "
-"необходимо."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
-"За да печатате на SMB принтер, трябва да дадете името\n"
-"на SMB хоста (Забележка ! То може да е различно от TCP/IP хоста !)\n"
-"и възможно IP адреса на принтерския сървър, както и общото име на\n"
-"принтера, до който искате достъп и подходящо имен, парола и информация\n"
-"за работната група."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "Настройки на SMB (Windows 9x/NT) принтер"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "Принтер \"%s\" на сървър \"%s\""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ", printer \"%s\" on server \"%s\""
-msgstr ", принтер \"%s\" на сървър \"%s\""
+"Syslog е програма която много демони използват да запазват съобщения в\n"
+"различни системни файлове (логове). Добре е постоянно да я имате работеща."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Remote printer name missing!"
-msgstr "Липсва име на отдалечен принтер !"
+msgid "Unknown/Others"
+msgstr "Неизвестни/Други"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Remote host name missing!"
-msgstr "Липсва име на име на хост !"
+msgid "No TV Card detected!"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Remote printer name"
-msgstr "Име на отдалечен принтер"
+msgid "Options"
+msgstr "Опции"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remote host name"
-msgstr "Име на отдалечен хост"
+msgid "The printer \"%s\" is set as the default printer now."
+msgstr "Принтерът \"%s\" вече е определен за ползване по подразбиране."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
-"За да използвате отдалечен lpd принтер, трябва да предоставите имената на "
-"хоста на принтерния сървър и името на принтера на този сървър."
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "Опции на отдалечен lpd-принтер"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Manual configuration"
-msgstr "Ръчна настройка"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgstr "Генерация на cpu (напр: 8 за PentiumIII, ...)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "Трябва да въведете/изберете принтер/устройство!"
+msgid "Auto-detected"
+msgstr "Автоматично засечен"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
 msgstr ""
-" (Паралелни портове: /dev/lp0, /dev/lp1, ..., съответсващи на LPT1:, "
-"LPT2:, ..., 1-ви USB принтер: /dev/usb/lp0, 2-ри USB принтер: /dev/usb/"
-"lp1, ...)."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "Моля, изберете порт към който свързан принтера ви."
+"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
+"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
+"използват Интернет връзката на този компютър.\n"
+"\n"
+"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
+"вътрешната си мрежа (LAN)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
-"Моля, изберете порта на който вашият принтер е закачен или въведете име на "
-"устройство/име на файл във входното поле"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "Моля, изберете сериен порт към който свързан модемът ви."
+"Няма свободно място за 1 МБ стартиращо поле ! Инсталацията ще продължи, но, "
+"за да стартирате системата си, ще трябва да създадете стартиращо поле в "
+"DiskDrake"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
-msgstr "Това е списък на автоматично открити принтери."
+msgid "Refuse"
+msgstr "Откажи"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr "За сега, няма налична алтернатива"
+msgid "HFS"
+msgstr "HFS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
-"Конфигурацията на принтера ще работи нашълно автоматично. Ако вашият принтер "
-"не е бил коректно открит или вие предпочитате на настроите принтера, "
-"включете на \"Ръчна конфигурация\"."
+"HardDrake прави проби на хардуера, и евентуално настройва\n"
+"нов/променен хардуер."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, c-format
-msgid "The following printer was auto-detected. "
-msgstr "Следните принтери са автоматично открити. "
+msgid "Remote Printers"
+msgstr "Отдалечен принтер"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Creating and formatting file %s"
+msgstr "Създаване и форматиране на файл %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+msgid "if set to yes, check additions/removals of sgid files."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
-"Алтернативно, вие може да зададете име на устройство/файл в изходния ред"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
-"Ако той не е този който искате да конфигурирате, въведете име на устройство/"
-"име на файл във входното поле"
+msgid "Choose an existing LVM to add to"
+msgstr "Изберете съществуващ LVM за прибавяне"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Available printers"
-msgstr "Налични принтери"
+msgid "xfs restart"
+msgstr "xfs рестартира"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No printer found!"
-msgstr "Няма намерен принтер!"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
+"Принтерът \"%s\" вече съществува,\n"
+"наистина ли искате да презапишете настройката ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "You must enter a device or file name!"
-msgstr "Вие трябва да въведете устройство или име на файл!"
+msgid "No partition available"
+msgstr "няма дялове на разположение"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+msgid "Use the scanners on hosts: "
 msgstr ""
-"Няма намерен локален принтер! За да инсталирате ръчно принтер, въведете име "
-"на устройство/име на файл във входното поле (Паралелни портове /dev/lp0, /"
-"dev/lp1, ..., съответсващи на LPT1:, LPT2:, ..., 1-ви USB принтер: /dev/usb/"
-"lp0, 2-ри USB принтер: /dev/usb/lp1, ...)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Local Printer"
-msgstr "Локален принтер"
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "USB printer \\#%s"
-msgstr "USB принтер \\#%s"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Domain Name Resolver"
+msgstr "Име на домейна"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "Пример на паралелен порт \\#%s"
+msgid "Encryption key (again)"
+msgstr "Ключ за криптиране (отново)"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "Принтер \"%s\" на SMB/Windows сървър \"%s\""
+msgid "Samba share name missing!"
+msgstr "Липсва име на SAMBA share !"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "Мрежов принтер \"%s\", порт %s"
+msgid "True Type install done"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Detected %s"
-msgstr "Засечен %s"
+msgid "Detection in progress"
+msgstr "Откриване в прогрес"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr ", принтер \"%s\" на SMB/Windows сървър \"%s\""
+msgid "Build Whole Kernel -->"
+msgstr "Построява цялото ядро -->"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
-msgstr ", мрежови принтер \"%s\", порт %s"
+msgid "Welcome to %s"
+msgstr "Добре дошли в %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
-msgstr ""
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "Сложете дискета за обновяване на модули в устройство %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Bootsplash"
 msgstr ""
-"Автоматично открива принтери свързани с машини работещи под Microsoft Windows"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
-msgstr "Автоматично открива принтери свързани директно към локалната мрежа"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr ""
+"Следният принтер\n"
+"\n"
+"%s%s\n"
+"е директно свързан към вашата система"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "Автоматично открива принтери свързани към тази машина"
+msgid "Printer sharing on hosts/networks: "
+msgstr "Принтер поделен на хсотове/мрежи: "
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 "\n"
-"Добре дошли на Магьосника за конфигуриране на Принтер\n"
-"\n"
-"Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n"
-"\n"
-"Ако имате принтер(и) свързани към тази машина, включете ги, така че те да "
-"могат да се конфигурират автоматично.\n"
-"\n"
-"Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате "
-"да настройвате принтерите сега."
+"Командата \"%s\" също така ви позволява да поправите настройките на опциите "
+"за определена работа на принтера. Просто добавете целаните настройки към "
+"командния ред, напр. \"%s <file>\". "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"В някои случаи, %s драйверът се нуждае от допълнителна информация, за\n"
+"да работи коректно, въпреки че нормално работи и без нея. Желаете ли "
+"даподадете\n"
+"допълнителни опции за него или да разрешите на драйвера да потърси "
+"информацията\n"
+"от която се нуждае ? По принцип това може да забие компютъра ви, но няма да "
+"го повреди."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"%s\n"
 "\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"Click on Configure to launch the setup wizard."
 msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"Добре дошли в инструмента за споделяне на Интернет връзката !\n"
 "\n"
+"%s\n"
 "\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
-msgstr ""
+"Цъкнете ``Настрой'', ако искате да стартиране установяващия магьосник."
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid ")"
-msgstr ""
+msgid "Cuba"
+msgstr "Куба"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on "
-msgstr ""
+msgid "Searching for new printers..."
+msgstr "Търси за нови принтери..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
-msgstr ""
+msgid "Belize"
+msgstr "Белиз"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "Настройка на принтера \"%s\" ..."
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid " (multi-session)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Searching for new printers..."
-msgstr "Търси за нови принтери..."
+msgid "Kernel Boot Timeout"
+msgstr "Изчакване за стартиране на ядрото"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
-"ЗАБЕЛЕЖКА: В зависимост от модела принтер и печатащата система до %d MB "
-"допълнително софтуер ще бъде инсталиран."
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
-msgstr "Сигурни ли сте, че искте да настроите печат за тази машина?\n"
+"Картата ви може да има поддръжка на хардуерно 3D ускорение, но само с Xfree %"
+"s.\n"
+"Картата ви се поддържа от XFree %s, който може да има по-добра поддръжка на "
+"2D."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "Искатели да разрешите печат за принтерите споменати горе?\n"
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "Помощникът за разделине на дялове на DrakX намери следните решения:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "Искате ли да разрешите печат на принтерите в локалната мрежа?\n"
+msgid "Hungarian"
+msgstr "Унгарска"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
-"Искате ли да разрешите печат на принтерите споменати горе или на принтерите "
-"в локалната мрежа?\n"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr " (Убедете се, че принтерите са свързани и включени).\n"
+"Посочете доставчика си.\n"
+" Ако не е в списъка, изберете Unlisted"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr "Няма намерени принтери включени директно към машината ви"
+msgid "Automatic time synchronization (using NTP)"
+msgstr "Автоматична синхронизация на времето (използва NTP)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
-msgstr ""
-"\n"
-"Има %d неизвестни принтери включени към вашата систенма"
+msgid "8 MB"
+msgstr "8 МБ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
-"\n"
-"Има един неизвестен принтер включен към вашата систенма"
+msgid "LDAP Server"
+msgstr "LDAP сървър"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
 msgstr ""
-"Следният принтер\n"
-"\n"
-"%s%s\n"
-"е директно свързан към вашата система"
+"PCMCIA поддържката обикновенно поддържа неща като ethernet и модеми в\n"
+"laptop-и. Това няма да се стартира преди да бъде настроен, така че е\n"
+"по-добре да я имате инсталирана на машини, които не се нуждаят от нея."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr ""
-"Следния принтер\n"
-"\n"
-"%s%s\n"
-"е директно свързани към вашата система"
+msgid "Choose your country"
+msgstr "Изберете страната си"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The following printers\n"
 "\n"
-"%s%s\n"
-"are directly connected to your system"
+"- System Files:\n"
 msgstr ""
-"Следните принтери\n"
 "\n"
-"%s%s\n"
-"са директно свързани към вашата система"
+"- Системни файлове:\n"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "and %d unknown printers"
-msgstr "и %d неизвестни принтери"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Standalone Tools"
+msgstr "Конзолни инструменти"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "and one unknown printer"
-msgstr "и един неизвестен принтер"
+msgid "Where"
+msgstr "Къде"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Checking your system..."
-msgstr "Проверка на вашата система..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "Рестартира XFS"
+msgid "but not matching"
+msgstr "но не съвпада"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
+"Тук може да изберете алтернативен драйвер (OSS или ALSA) за вашата звукова "
+"карта (%s)."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Examples for correct IPs:\n"
-msgstr "Примери на правилни IP:\n"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "Всичко правилно ли е ?"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "Липсва име на NCP сървър !"
+msgid "Configuring PCMCIA cards..."
+msgstr "Настройка на PCMCIA картите ..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "kdesu missing"
+msgstr "липсва kdesu"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Принтер на отдалечен CUPS сървър"
+msgid "Encryption key"
+msgstr "Ключ за криптиране"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "Изтриване на опашката"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "засечена %s"
+#: ../../lang.pm:1
+#, c-format
+msgid "Christmas Island"
+msgstr "Коледни Острови"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "Добави потребител"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "Инсталацията на bootloader провалена. Появи се следната грешка:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
-msgstr ""
+msgid "EIDE/SCSI channel"
+msgstr "EIDE/SCSI канал"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr "IP адрес на хост/мрежа:"
+msgid "Set this printer as the default"
+msgstr "Определи този принтер за ползване по подразбиране"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
-msgstr ""
-"Този адрес/хост вече е в списъка, той не може да бъде добавен отново.\n"
+msgid "partition %s"
+msgstr "дял %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
-msgstr "Въведеният хост/мрежа IP не е правилен.\n"
+msgid "Paranoid"
+msgstr "Параноично"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Host/network IP address missing."
-msgstr ""
+msgid "NIS"
+msgstr "NIS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
-msgstr "Избор на мрежа или хост за който локалният принтер ще бъде разрешен:"
+msgid "<-- Del User"
+msgstr "<-- Изтрива потребител"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Sharing of local printers"
-msgstr "Поделяне на локални принтери"
+msgid "Location on the bus"
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove selected host/network"
-msgstr "Изтриване на избран хост/мрежа"
+msgid "No printer found!"
+msgstr "Няма намерен принтер!"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
-msgstr "Редактиране на избран хост/мрежа"
+msgid "the vendor name of the device"
+msgstr "името на производителя на устройството"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr "Добавя хост/мрежа"
+msgid "Erase entire disk"
+msgstr "Изтрий целия диск"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
-"Това са машините и мрежите за които локално свързаните принтери ще бъдат "
-"достъпни:"
+msgid " (Default)"
+msgstr " (По подразбиране)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Автоматична корекция на CUPS конфигурация"
+msgid "Automatic reconfiguration"
+msgstr "Автоматична реконфигурация"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "Промяна системата за печат"
+msgid "Receiving Speed:"
+msgstr "Скорост на получаване:"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
+msgid "Turks and Caicos Islands"
+msgstr "Тюрк и Кайкос Острови"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "Готово"
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "permissions"
+msgstr "права"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "IP на CUPS сървъра"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "No remote machines"
-msgstr "Няма отдалечени машини"
+msgid "<- Previous"
+msgstr "<- Предишен"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Custom configuration"
-msgstr "Потребителска настройка"
+msgid "Internet Connection Sharing configuration"
+msgstr "Настройка на споделянето на Интернет връзката"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "Принтер поделен на хсотове/мрежи: "
+msgid "Toggle between flat and group sorted"
+msgstr "Превключване между нормално и сортиране по групи"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr "Автоматично открива наличните принтери наотдалечените машини"
+msgid "Themes"
+msgstr "Теми"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
-msgstr "Принтерите на тази машина с достъпни за другите компютри"
+msgid "Options: %s"
+msgstr "Опции: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
-"Вие също решавате, дали принтерите на отдалечените машини ще бъдат "
-"автоматично достъпни на тази машина."
+"В момента използвате %s като програма за стартиране.\n"
+"Цъкнете на Настройка, за да стартирате установяващия магьосник."
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
-"Тук може да решите дали принтерите свързани към вашата машина ще бъдат "
-"достъпни от отдалечените машини и от кой."
+msgid "OKI winprinter configuration"
+msgstr "Настройки на OKI Winprinter"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "Конфигурация на CUPS поделен принтер"
+#: ../../lang.pm:1
+#, c-format
+msgid "Saint Helena"
+msgstr "Света Елена"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
-msgstr "Автоматично откриване на принтер (Локален, TCP/Socket, и SMB прентери)"
+msgid "Security Level"
+msgstr "Ниво на защита"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
+"Някои етапи не са завършени.\n"
 "\n"
-"Отдалечените на CUPS сървър принтери не трябва да настройвате\n"
-"тук; тези принтери ще бъдат засечени автоматично."
+"Наистина ли искате да излезете сега ?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "How is the printer connected?"
-msgstr "Как е свързан принтерът ?"
+msgid "Sudan"
+msgstr "Судан"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "Изберете връзка към принтера"
+msgid "Polish (qwertz layout)"
+msgstr "Полска (QWERTZ наредба)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
-msgstr ""
+msgid "Syria"
+msgstr "Сирия"
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
 "\n"
-"Set the user umask."
-msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (val)\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (size)\n"
+"Добре дошли в %s - избиране на операционна система!\n"
+"\n"
+"Изберете операционната система от горният списък или изчакайте\n"
+"%d секунди за подразбиращо стартиране.\n"
 "\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
-msgstr ""
+msgid "Portuguese"
+msgstr "Португалска"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr "ако е зададено да, проверява отворените портове"
+msgid "Loopback file name: "
+msgstr "Име на loopback файла: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
-msgstr ""
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "DNS сървъра трябва да бъде във формат 1.2.3.4"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr "ако е задаено да, изпраща по пощата съобщение за резултата."
+msgid "Serbia"
+msgstr "Сръбия"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid "Newzealand"
 msgstr ""
-"ако е задаено да, проверява файловете/директориите достъпни за писане от "
-"всеки."
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr "ако е задаено да, изпраща резултата от проверката на tty."
+msgid "This directory should remain within the root filesystem"
+msgstr "Тази директория трябва да остане в рамките на root файловата система."
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
-msgstr ""
+msgid "CapsLock key"
+msgstr "CapsLock клавиш"
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "Install bootloader"
+msgstr "Инсталиране на bootloader"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "Изберете капацитет на паметта на графичната си карта"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
-msgstr ""
+msgid "Dynamic IP Address Pool:"
+msgstr "Пул с динамичен IP адрес:"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "LVM name?"
+msgstr "LVM име ?"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "Намерени са %s %s интерфейси"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+msgid "sticky-bit"
+msgstr "sticky-бит"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "Инсталирай"
 
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "Ново име на принтер"
 
-#: ../../security/help.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
-"Аргументи: (umask)\n"
-"\n"
-"Установява за root umask."
+msgid "Card IRQ"
+msgstr "IRQ на картата"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
+"Arguments: (umask)\n"
 "\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"Set the user umask."
 msgstr ""
-"Аргументи: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Задава за паролата минималната дължина, минимален брой цифри и минимален "
-"брой главни букви."
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
-msgstr ""
+msgid "logdrake"
+msgstr "логдрейк"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgstr " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Изберете флопи устройство, където да направите стартираща дискета"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-" Активира/Забранява ежедневна проверка за защита"
+msgid "LILO with text menu"
+msgstr "LILO с текстово меню"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Everything (no firewall)"
+msgstr "Всичко (без firewall)"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
-msgstr ""
+msgid "You must specify a kernel image"
+msgstr "Трябва да зададете обаза на ядрото"
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
-msgstr ""
+msgid ", multi-function device on USB"
+msgstr ", многофункционално устройство на USB"
 
-#: ../../security/help.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Do"
+msgstr "Направи"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "Свързване с огледалния сървър за получаване на списъка с пакетите"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable libsafe if libsafe is found on the system."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Литвийска AZERTY (стара)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "Бразилска (ABNT-2)"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
-msgstr ""
+msgid "IP address of host/network:"
+msgstr "IP адрес на хост/мрежа:"
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
+"лентата за прогрес y координати\n"
+"от горният ляв ъгъл"
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
-msgstr ""
+msgid "System installation"
+msgstr "Инсталация на система"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
-msgstr ""
+msgid "Saint Vincent and the Grenadines"
+msgstr "Свети Винсент и Гренадин"
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/Файл/_Отвори"
 
 #: ../../security/help.pm:1
 #, c-format
@@ -12518,873 +12063,703 @@ msgid ""
 "to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
-"\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
-msgstr ""
+msgid "Location of auto_install.cfg file"
+msgstr "Местоположение на auto_install.cfg файл"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Изчакване на Open Firmware"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява директно влизане на root."
+msgid "Hungary"
+msgstr "Унгария"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява отдалечено влизане на root."
+msgid "Total progess"
+msgstr "Общ прогрес"
 
-#: ../../security/help.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява престартиране от потребител на конзола."
+msgid "Color configuration"
+msgstr "Конфигурация на цвят"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "New Zealand"
+msgstr "Нова Зеландия"
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява автоматично влизане."
+"Вече има някой ограничения, и повече автоматични проверки ще се изпълняват "
+"всяка вечер."
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
-msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява icmp echo."
+msgid "please choose the date to restore"
+msgstr "моля, изберете датата за възстановяване"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse broadcasted icmp echo."
+msgid "Switching from ext2 to ext3"
+msgstr "Преход от ext2 към ext3"
+
+#: ../../printer/data.pm:1
+#, c-format
+msgid "LPRng"
+msgstr "LPRng"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Netherlands Antilles"
+msgstr "Холандски Антили"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Browse to new restore repository."
 msgstr ""
-"Arguments: (arg)\n"
-"\n"
-"Позволява/Забранява broadcasted icmp echo."
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
-msgstr ""
-"Arguments: (arg)\n"
+"Welcome to the Printer Setup Wizard\n"
 "\n"
-"Позволява/Забранява съобщения за IPv4 грешки."
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
+msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Security Administrator (login or email)"
-msgstr "Администратор по сигурността (логин или Ел.поща)"
+msgid "and %d unknown printers"
+msgstr "и %d неизвестни принтери"
 
-#: ../../security/level.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"A library which defends against buffer overflow and format string attacks."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
-"Библиотека, която осигурява защита от aтаки с препълване на буфер и форматни "
-"стрингове."
 
-#: ../../security/level.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Use libsafe for servers"
-msgstr "Използвайте libsafe за сървъри"
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "Не е намерена ISDN PCI карта. Моля изберете от следващият екран."
 
-#: ../../security/level.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Security level"
-msgstr "Ниво на сигурност"
+msgid "GB"
+msgstr "ГБ"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please choose the desired security level"
-msgstr "Моля, изберете ниво на сигурност"
+msgid "Please give a user name"
+msgstr "Моля, задайте потребителско име"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "DrakSec Basic Options"
-msgstr "Основни опции на DrakSec "
+msgid "Enable CD Boot?"
+msgstr "Стартиране от CD ?"
 
-#: ../../security/level.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+msgid " enter `void' for void entry"
 msgstr ""
-"Подобно на предишното ниво, но системата е напълно затворена.\n"
-"Нивото на сигурност е на максимума си."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+msgid "on Hard Drive"
 msgstr ""
-"С това ниво на сигурност, ползването на системата като сървър става "
-"възможно.\n"
-"Сигурността сега е достатъчно голяма да се използва системата като\n"
-"сървър приемащ връзки от много клиенти. "
 
-#: ../../security/level.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
-"Вече има някой ограничения, и повече автоматични проверки ще се изпълняват "
-"всяка вечер."
+msgid "Winmodem connection"
+msgstr "Winmodem връзка"
 
-#: ../../security/level.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
-"Това е стандартната сигурност препоръчителна за компютър, който ще бъде "
-"използван да се свързва към Интернет като клиент."
 
-#: ../../security/level.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+"Arguments: (arg)\n"
+"\n"
+"Set the password history length to prevent password reuse."
 msgstr ""
-"Паролата сега е включена, но използването като мрежов компютър не е "
-"препоръчително."
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
-"Това ниво се използва с внимание. Това кара системата ви по-лесна за\n"
-"употреба, но е по-чувствително: не трябва да бъде използвана на машини\n"
-"свързани с други или по Интернет. Няма достъп с пароли."
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Параноично"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr ""
+"Няма достатъчно swap за приключване на инсталацията, моля добавете малко"
 
-#: ../../security/level.pm:1
-#, c-format
-msgid "Higher"
-msgstr "По-високо"
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Порт"
 
-#: ../../security/level.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "High"
-msgstr "Високо"
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
+msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Poor"
-msgstr "Лошо"
+msgid "Which is your timezone?"
+msgstr "Коя е времевата ви зона ?"
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Добре дошли при Cracker-ите"
+msgid "Guinea"
+msgstr "Гвинея"
 
-#: ../../standalone/XFdrake:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "Моля влезте отново в %s, за да активирате промените"
+msgid "The system is now connected to the Internet."
+msgstr "Системата в момента е свързана към Интернет."
 
-#: ../../standalone/XFdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "Моля излезте от сесията и използвайте Ctrl-Alt-BackSpace"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr "Южни Сандвичеви Острови и Южна Джорджия"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Japan (broadcast)"
 msgstr ""
-"/etc/hosts.allow и /etc/hosts.deny вече са конфигурирани - не са променени"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr "Трябва да създадете първо /etc/dhcpd.conf!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
-msgstr "Нещо беше грешно! - Дали mkisofs  е инсталиран?"
+msgid "Mozambique"
+msgstr "Мозамбик"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+msgid "Icon"
+msgstr "Икона"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No floppy drive available!"
-msgstr "Няма флопи устройство!"
+msgid "Please choose what you want to backup"
+msgstr "Моля изберете какво искате да запазите"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Floppy can be removed now"
-msgstr "Флопито може да бъде извадено сега"
+msgid "256 colors (8 bits)"
+msgstr "256 цвята (8 бита)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../any.pm:1
 #, c-format
-msgid "Couldn't access the floppy!"
-msgstr "Нямам достъп до флопи!"
+msgid "Read-write"
+msgstr "Четене-запис"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please insert floppy disk:"
-msgstr "Сложете флопи дискета:"
+msgid "Size: %s\n"
+msgstr "Размер: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Write Config"
-msgstr "Записва настройка"
+msgid "Hostname: "
+msgstr "Име на хост:"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr "Пул с динамичен IP адрес:"
+msgid "Chunk size %s\n"
+msgstr "Размер на парчето %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Build the future of Linux!"
 msgstr ""
-"Повечето от тези стойности са извлечени\n"
-"от вашата работеща система.\n"
-"Вие може да ги промените при необходимост."
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Server Configuration"
-msgstr "Конфигуриране на dhcpd сървър"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "IP Range End:"
-msgstr "Край на IP обхват:"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "IP Range Start:"
-msgstr "Начало на IP обхват:"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "NIS сървър"
+msgid "Local Printer"
+msgstr "Локален принтер"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Domain Name:"
-msgstr "Име на домейна:"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
+msgstr ""
+" Авторски права (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
+"\\@epita.fr>"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Broadcast Address:"
-msgstr "Broadcast адрес:"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr "Маска на подмрежа:"
+msgid "ADSL connection"
+msgstr "ADSL връзка"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Routers:"
-msgstr "Рутери:"
+msgid "No configuration, please click Wizard or Advanced.\n"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Netmask:"
-msgstr "Мрежова маска:"
+msgid "Error!"
+msgstr "Грешка !"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Subnet:"
-msgstr "Подмрежа:"
+msgid "cable connection detected"
+msgstr "засечена е кабелна връзка"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+msgid "Permission denied transferring %s to %s"
 msgstr ""
-"Трябва да престартирате Мениджъа на Дисплей за да имат ефект промените. \n"
-"(обслужване dm restart - от конзолара)"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "dhcpd Config..."
-msgstr "Настройка на dhcpd..."
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Delete Client"
-msgstr "Изтрива клиент"
+msgid "/_Report Bug"
+msgstr "/_Информирай за бъг"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "<-- Edit Client"
-msgstr "<-- Редактира клиент"
+msgid "Resize"
+msgstr "Промени големината"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr "Добавя клиент -->"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP клиент"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP клиент"
+msgid "Dominica"
+msgstr "Доминика"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No net boot images created!"
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "type: %s"
-msgstr "тип: %s"
-
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "<-- Del User"
-msgstr "<-- Изтрива потребител"
+msgid "Resolution: %s\n"
+msgstr "Разделителна способност: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Add User -->"
-msgstr "Добавя потребител -->"
+msgid "matching"
+msgstr "съвпадение"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
+"Нямам достъп да модулите на ядрото съответстващи на вашият (файл %s липсва), "
+"това означава, че вашето флопи не е синхронизирано с инсталационният носител "
+"(моля направете ново boot флопи)"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Delete All NBIs"
-msgstr "Изтрива всички NBI"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "<-- Delete"
-msgstr "<-- Изтрива"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "This will take a few minutes."
-msgstr "Това ще отнеме няколко минути."
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
-msgid "Build All Kernels -->"
-msgstr "Построява всички ядра -->"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
+"Моля, изберете верния порт. Например, портът COM1 под Windows под GNU/Linux\n"
+"се нарича ttyS0."
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "No NIC selected!"
-msgstr "Няма NIC избран!"
+msgid "The following packages are going to be removed"
+msgstr "Следните пакети ще бъдат премахнати"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr "Построява единичен  NIC -->"
+msgid "Connect to the Internet"
+msgstr "Свържи се към Интернет"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "No kernel selected!"
-msgstr "Няма избрано ядро!"
+msgid "Use existing partitions"
+msgstr "Изпозване на съществуващ дял"
 
-#: ../../standalone/drakTermServ:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr "Построява цялото ядро -->"
+msgid "Canadian (Quebec)"
+msgstr "Канадска (Квебек)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "Mouse device: %s\n"
+msgstr "Устройство на мишката: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Boot Floppy"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
+"Options Description:\n"
 "\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
+"Options\n"
 "\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
-"\n"
-"\n"
-" Благодарности:\n"
-"\t- LTSP Проект http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+"Накрая, ще бъдете попитани дали искате да виждате графичния интерфейс при\n"
+"зареждане. Отбележете, че този въпрос ще ви бъде зададен даже ако изберете,\n"
+"да не тествате настройката. Очевидно, бихте отговорили с \"Не\", ако "
+"машината\n"
+"ще работи като сървър или ако няма успешно настроен дисплей."
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "We are now going to configure the %s connection."
+msgstr "Сега ще настроим %s връзката."
+
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "MandrakeExpert Corporate"
+msgstr "MandrakeExpert обединява"
+
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
-"\n"
-" Авторски права (C) 2002 от MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "Автоматично открива принтер"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "Изтриване на опашката"
+
+#: ../../steps.pm:1
 #, c-format
-msgid "Add/Del Clients"
-msgstr "Добавя/Изтрива клиенти"
+msgid "Language"
+msgstr "Избор на език"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add/Del Users"
-msgstr "Добавя/Изтрива потребители"
+msgid "Printer model selection"
+msgstr "Избор модел на принтера"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Net Boot Images"
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
 msgstr ""
+"След промяна на типа на дяла %s, всички данни върху него ще бъдат загубени"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d секунди"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Stop Server"
-msgstr "Спира сървър"
+msgid "Insert a blank floppy in drive %s"
+msgstr "Сложете празна дискета в устройство %s"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Start Server"
-msgstr "Стартира сървър"
+msgid "A valid URI must be entered!"
+msgstr "Трябва да бъде въведен валиден URI!"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Disable Server"
-msgstr "Изключва Сървър"
+msgid "Found \"%s\" interface do you want to use it ?"
+msgstr "Намерен е \"%s\" интерфейс. Искате ли да го използвате?"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Enable Server"
-msgstr "Включва Сървър"
+msgid "Re-configure interface and DHCP server"
+msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "Конфигурация на Терминален Сървър в Mandrake "
+msgid "Sound configuration"
+msgstr "Настройка за звук"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Remove the last item"
-msgstr "Изтрива последният обект"
+msgid "Photo test page"
+msgstr "Тестова страница със снимка"
 
-#: ../../standalone/drakautoinst:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add an item"
-msgstr "Добавяне на обект"
+msgid "Custom disk partitioning"
+msgstr "Клиентско разделяне на диска"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Auto Install"
-msgstr "Автоматично Инсталира"
+msgid "Enter Printer Name and Comments"
+msgstr "Въведете име на принтер и коментар"
 
-#: ../../standalone/drakautoinst:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
 msgstr ""
-"Дискетата е успешно създадена.\n"
-"Сега можете да преиграете инсталацията."
+"Следните принтери\n"
+"\n"
+"%s%s\n"
+"са директно свързани към вашата система"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Congratulations!"
-msgstr "Поздравления !"
+msgid "type: %s"
+msgstr "тип: %s"
 
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
-msgstr ""
-"\n"
-"Добре дошли.\n"
-"\n"
-"Параметрите за автоинсталация са налични в секцията в ляво"
+msgid "Slovakian (QWERTY)"
+msgstr "Словашка (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, c-format
-msgid "Creating auto install floppy"
-msgstr "Подготвям дискета с автоматична инсталация"
+msgid "No Sound Card detected!"
+msgstr "Няма намерена звукова карта!"
 
-#: ../../standalone/drakautoinst:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "manual"
-msgstr "ръчно"
+msgid "Mouse Port"
+msgstr "Порт на мишката"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
-"Моля, изберете за всяка стъпка, дали ще се преиграе като при инсталацията, "
-"или ще бъде ръчна"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Настройка на автоматичните стъпки"
+"Трябва да престартирате Мениджъа на Дисплей за да имат ефект промените. \n"
+"(обслужване dm restart - от конзолара)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "replay"
-msgstr "повтори"
+msgid "Ftp Server"
+msgstr "Ftp Сървър"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (arg)\n"
 "\n"
-"Do you want to continue?"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto Install Configurator"
-msgstr "Настройчик на автоматична иснталация"
+msgid "%s fonts conversion"
+msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
-msgstr "Не мога да намеря нужна картинка `%s'."
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "the type of bus on which the mouse is connected"
+msgstr "Моля, изберете типа на шината към която е свързана мишката ви."
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Error!"
-msgstr "Грешка !"
+msgid "Uganda"
+msgstr "Уганда"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (size)\n"
 "\n"
-"Restore Backup Problems:\n"
-"\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"options description:\n"
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Comoros"
+msgstr "Комори"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Description:\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+"We are now going to configure the %s connection.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+"Press OK to continue."
+msgstr ""
+"\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
 "\n"
+"Сега ще настроим %s връзката.\n"
 "\n"
+"Натиснете OK, за да продължите."
+
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Yaboot mode"
+msgstr "Режим на Yaboot"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
-" обновявания 2002 MandrakeSoft от Stew Benedict <sbenedict\\@mandrakesoft."
-"com>"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "Обикновенна 3-бутонна мишка"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
-msgstr ""
-" Авторски права (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s"
-"\\@epita.fr>"
+msgid "Select another media to restore from"
+msgstr "Изберете друг носител за възстановяване от него"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Software Manager"
+msgstr "Софтуерен мениджър"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -13396,4663 +12771,5362 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
-"\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
-" \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
+msgid "Re-submit"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
-msgstr ""
+msgid "KB"
+msgstr "КБ"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Мрежов интерфейс"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Drakbackup"
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "Литвийска \"фонетичен\" QWERTY"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "Локален принтер"
+
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Restore"
-msgstr "Възстановява"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr "Проба за Plug & Play е неуспешна. Моля, изберете правилен монитор"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup Now"
-msgstr "Резервно копие сега"
+msgid "Services and deamons"
+msgstr "Услуиги и демони"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Advanced Configuration"
-msgstr "Допълнителна конфигурация"
+msgid "Remote host name missing!"
+msgstr "Липсва име на име на хост !"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Wizard Configuration"
-msgstr "Конфигурация на Магьосник"
+msgid "with /usr"
+msgstr "с /usr"
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "View Backup Configuration."
-msgstr "Преглед на Конфигурация за резервно копие."
+msgid "Network"
+msgstr "Мрежа"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "Настройка на мрежата"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
+"Автоматично открива принтери свързани с машини работещи под Microsoft Windows"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Drakbackup Configuration"
-msgstr "Drakbackup Конфигурация"
+msgid "This password is too simple"
+msgstr "Тази парола е прекалено проста"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Total Progress"
-msgstr ""
+msgid "Slovakian (QWERTZ)"
+msgstr "Словашка (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "Sending files..."
-msgstr "Изпращам файлове..."
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "files sending by FTP"
-msgstr "файлове изпратени по FTP"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr "Наистина минимална инсталация (особенно без urpmi)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup other files"
-msgstr "Резервно копие на други файлове"
+msgid ""
+"  Transfer  \n"
+"Now"
+msgstr ""
+"  Прехвърля  \n"
+"Сега"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup user files"
-msgstr "Резервно копие на потребителски файлове"
+msgid "Use daemon"
+msgstr "Използва демон"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Backup system files"
-msgstr "Резервно копие на системни файлове"
+msgid "Authentication"
+msgstr "Идентификация"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
-msgstr ""
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr "Добавя този принтер на Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "IP на CUPS сървъра"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
 msgstr ""
+"Изберете един от автоматично откритите принтери в списъка горе или въведете "
+"име на хост или IP и опционално номер на порт (подразбиращ 9100) в полето."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please select data to backup..."
-msgstr "Моля, изберете данни за резервно копие..."
+msgid "Where do you want to mount %s?"
+msgstr "Къде искате да монтирате устройство %s ?"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please select media for backup..."
-msgstr "Моля, изберете носител за възстановяване..."
+msgid "Restore Via Network"
+msgstr "Възстановява през мрежа"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please select data to restore..."
-msgstr "Моля, изберете данни за възстановяване..."
+msgid "Algeria"
+msgstr "Алжир"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "Следните пакети ще трябва да се инсталират:\n"
+msgid "Initrd-size"
+msgstr "Initrd-големина"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Next"
-msgstr "Следващ"
-
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Previous"
-msgstr "Предишен"
+msgid "2 MB"
+msgstr "2 МБ"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Save"
-msgstr "Запазва"
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Build Backup"
-msgstr "Лош backup-файл"
+msgid "Setting Default Printer..."
+msgstr "Принтер по подразбиране"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Restore Progress"
-msgstr "Прогрес на възстановяване"
+msgid "Interface %s (using module %s)"
+msgstr "Интерфейс %s (използващ модул %s)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Restore From Catalog"
-msgstr "Възстановява от каталог"
+msgid "Name: %s\n"
+msgstr "Име: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Browse to new restore repository."
-msgstr ""
+msgid "Generating preview ..."
+msgstr "Генерирам преглед..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "CD in place - continue."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "Клиентска"
+#: ../../mouse.pm:1
+#, c-format
+msgid "serial"
+msgstr "серийна"
 
-#: ../../standalone/drakbackup:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Restore all backups"
-msgstr ""
+msgid "DVD-ROM"
+msgstr "DVD-ROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Failed..."
-msgstr "Възстановяването пропадна..."
+msgid "Georgian (\"Latin\" layout)"
+msgstr "Грузинска (\"Латинска\" наредба)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Files Restored..."
+msgid "Get the best items with Mandrake Linux Strategic partners"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Path or Module required"
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Hostname required"
-msgstr "Изисква име на машина"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Username required"
-msgstr "Изисква потребителско име"
+msgid "Kenya"
+msgstr "Кения"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Password required"
-msgstr "Изисква парола"
+msgid "Use ``Unmount'' first"
+msgstr "Първо използвайте 'Демонтиране'"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Host Path or Module"
-msgstr ""
+msgid "Installing mtools packages..."
+msgstr "Инсталиране на mtools пакети..."
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Host Name"
-msgstr "Име на хост"
+msgid "You must specify a root partition"
+msgstr "Трябва да зададете кореновият дял"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
-msgstr ""
+msgid "first step creation"
+msgstr "първа стъпка на създаване"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Restore Via Network"
-msgstr "Възстановява през мрежа"
+msgid "Both Shift keys simultaneously"
+msgstr "Двата Shift клавиша едновременно"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "Изберете графична карта"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
-msgstr ""
+msgid "LPRng - LPR New Generation"
+msgstr "LPRng - LPR Ново поколение"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore From Tape"
-msgstr "Възстановява от лента"
+msgid "Drakbackup Configuration"
+msgstr "Drakbackup Конфигурация"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "Запази като..."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore From CD"
-msgstr "Възстановява от  CD"
+msgid "Korea (North)"
+msgstr "Корея (Северна)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Backup files not found at %s."
-msgstr ""
+msgid "Autologin"
+msgstr "Автоматично влиза"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr ""
-"Промяна\n"
-"пътя на възстановяване"
+msgid "System configuration"
+msgstr "Конфигурация на система"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
+msgid "Domain Admin Password"
+msgstr "Парола за администратор на домейн"
+
+#: ../../share/advertising/05-desktop.pl:1
+#, fuzzy, c-format
 msgid ""
-"Restore Selected\n"
-"Files"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
 msgstr ""
-"Възстановява избраните\n"
-"файлове"
+"Mandrake Linux 9.1 ви предоставя 11 потребителски интерфейса които могат да "
+"бъдат напълно модифицирани: KDE 3, Gnome 2, WindowMaker, ..."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "Настройка на принтера \"%s\" ..."
+
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "МБ"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "select path to restore (instead of /)"
-msgstr "избор на път за възстановяване (вместо /)"
+msgid "Virgin Islands (British)"
+msgstr "Вирджински Острови (Британски)"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Other"
-msgstr "Възстанови други"
+msgid "Bermuda"
+msgstr "Бермуда"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Restore Users"
-msgstr "Възстанови Потребители"
+msgid "click here if you are sure."
+msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Restore system"
-msgstr "Система за възстановяване"
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
+"По-горе са изброени засечените Linux дялове съществуващи\n"
+"на твърдия ви диск. Можете да запазите избора направен от магьосника, те са\n"
+"добри за обща употреба. Ако ги промените, трябва да поне да определите\n"
+"root дял (\"/\"). Не избирайте прекалено малки дялове, защото няма да "
+"можете\n"
+"да инсталирате достатъчно софтуер. Ако искате да съхранявате данните си на\n"
+"отделен дял, трябва да изберете \"/home\" (възможно е само, ако имате "
+"повече\n"
+"от един Linux дял).\n"
+"\n"
+"\n"
+"За информация, всеки дял е показан, както следва: \"Име\", \"Капацитет\".\n"
+"\n"
+"\n"
+"\"Името\" се кодира както следва: \"тип на диска\", \"номер на диска\",\n"
+"\"номер на дял\" (например, \"hda1\").\n"
+"\n"
+"\n"
+"\"Типът на диска\" може да е \"hd\", ако е IDE твърд диск, или \"sd\", ако "
+"е\n"
+"SCSI твърд диск.\n"
+"\n"
+"\n"
+"\"Номерът на диска\" винаги е буквата след \"hd\" или \"sd\". При IDE "
+"дискове:\n"
+"\n"
+"   * \"a\" означава \"master диск на първия IDE контролер\",\n"
+"   * \"b\" означава \"slave диск на първия IDE контролер\",\n"
+"   * \"c\" означава \"master диск на втория IDE контролер\",\n"
+"   * \"d\" означава \"slave диск на втория IDE контролер\".\n"
+"\n"
+"\n"
+"При SCSI устройства, \"a\" означава \"първи твърд диск\", \"b\" означава "
+"\"втори твърд диск\" и т.н.."
+
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, c-format
-msgid "Other Media"
-msgstr "Друг носител"
+msgid "Remove"
+msgstr "Премахва"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select another media to restore from"
-msgstr "Изберете друг носител за възстановяване от него"
+msgid "Lesotho"
+msgstr "Лесото"
 
-#: ../../standalone/drakbackup:1
+#: ../../ugtk2.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
-msgstr ""
+msgid "utopia 25"
+msgstr "utopia 25"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Restore from Hard Disk."
-msgstr "Възстановява от твърд диск."
+msgid "Pipe job into a command"
+msgstr "Прекарай заданието през команда"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Use quota for backup files."
-msgstr "Използва квота за файлове на резервно копие."
+msgid "new dynamic device name generated by core kernel devfs"
+msgstr "ново динамично устройство генерирано от ядрото devfs"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
-msgstr ""
-"Моля, въведете максималният размер\n"
-" позволен за Drakbackup"
+msgid "Yes"
+msgstr "Да"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory to save:"
-msgstr "Моля, въведете директорията за запазване:"
+msgid "Cote d'Ivoire"
+msgstr "Кот д'ивоар"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Use Hard Disk to backup"
-msgstr "Използва твърд диск за резервно копие"
+msgid "Which protocol do you want to use?"
+msgstr "Какъв протокол желаете да промените ?"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "please choose the date to restore"
-msgstr "моля, изберете датата за възстановяване"
+msgid "Restore Progress"
+msgstr "Прогрес на възстановяване"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup the system files before:"
-msgstr "Резервно копие на файлове преди:"
+msgid "Estonia"
+msgstr "Естония"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
-msgstr "OK за възстановяване на други файлове."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
+msgstr ""
+"Имате празнина в таблицата с дяловете, но не мога да я използвам.\n"
+"Единственият начин е да преместите главните си дялове, за да имате празно "
+"място след extended-дяловете"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "         Restore Configuration       "
-msgstr "         Конфигурация за възстановяване       "
+msgid "Channel"
+msgstr "Канал"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
+msgid "Add"
+msgstr "Добавя"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "Няма настройвано споделяне на Интернет връзката."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid " Error while sending mail. \n"
+msgstr " Грешка по време на изпращане на поща. \n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "Моля, изберете сериен порт към който свързан модемът ви."
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
+#, c-format
+msgid "Keyboard"
+msgstr "Клавиатура"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data corrupted:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
-msgstr ""
+msgid "Choose the connection you want to configure"
+msgstr "Изберете връзката, който искате да използвате"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+msgid "Please wait, setting security level..."
+msgstr "Моля, изберете ниво на сигурност..."
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Mandrake Linux 9.1: the ultimate development platform"
+msgstr "Mandrake Linux 9.1 е непрекъснато разработваща се платформа"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "Настройка на мрежовото устройство %s"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "активирай сега"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "\t-Tape \n"
+msgid "Please choose which network interface will be used for the dhcp server."
 msgstr ""
+"Моля, изберете кой мрежов адаптер да използвам за връзка към dhcp сървър."
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "Търся пакети за обновяване"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "Място на монтиране: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"\n"
-"- Daemon (%s) include:\n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "With X"
+msgstr "С X"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "Multi-head configuration"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "No browser available! Please install one"
+msgstr "Няма налична програма за преглед! Моля изберете една"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Options:\n"
+"%s"
 msgstr ""
+"Да запазя ли промените ?\n"
+"Текущата настройка е:\n"
 "\n"
-"- Опции:\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "Не можете да инсталиране ReiserFS на дял по-малък от 32 МБ"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"\n"
-"- Save via %s on host: %s\n"
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
+"rwho протокола позволява на отдалечени потребители да се сдобият със списък\n"
+"на всички потребители влезли на машина с работещ rwho демон (подобен на "
+"finger)."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\t\tErase=%s"
-msgstr ""
+msgid "Domain name"
+msgstr "Име на домейна"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Sharing of local printers"
+msgstr "Поделяне на локални принтери"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid " (multi-session)"
-msgstr ""
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
+msgstr "http://www.mandrakelinux.com/en/91errata.php3"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " on device: %s"
-msgstr " на устройство: %s"
+msgid "Available printers"
+msgstr "Налични принтери"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "RW"
-msgstr ""
+msgid "Empty"
+msgstr "Празен"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Burn to CD"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"- Delete hard drive tar files after backup.\n"
-msgstr ""
+msgid "text width"
+msgstr "ширина на текст"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "Къде искате да монтирате устройство %s ?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- Other Files:\n"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
-msgstr ""
+msgid "Interface \"%s\""
+msgstr "Интерфейс \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr "С базова документация (препоръчва се!)"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "1 button"
+msgstr "1 бутон"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- System Files:\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 "\n"
-"- Системни файлове:\n"
+"Има %d неизвестни принтери включени към вашата систенма"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
+#, c-format
+msgid "Test"
+msgstr "Тест"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"Backup Sources: \n"
+"Allow/Forbid direct root login."
 msgstr ""
+"Arguments: (arg)\n"
 "\n"
-"Източник за резервно копие: \n"
+"Позволява/Забранява директно влизане на root."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Select user manually"
-msgstr "Избира потребители ръчно"
+msgid "Korea"
+msgstr "Корея"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Backup Users"
-msgstr "Резервно копие на потребители"
+msgid "Your choice? (default `%s'%s) "
+msgstr "Вашият избор ? (по подразбиране е `%s'%s) "
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Backup system"
-msgstr "Система за съхранение"
+msgid "Raw printer"
+msgstr "Raw принтер"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please choose what you want to backup"
-msgstr "Моля изберете какво искате да запазите"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "official vendor name of the cpu"
+msgstr "името на производителя на устройството"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "on Tape Device"
-msgstr ""
+msgid "Vendor"
+msgstr "Производител"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "on CDROM"
-msgstr ""
+msgid "Interface %s"
+msgstr "Интерфейс %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "across Network"
-msgstr ""
+msgid "Configure mouse"
+msgstr "Настройка на мишка"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "on Hard Drive"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "Изберете места за монтиране"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "Моля, изберете пакетите, които искате да инсталирате."
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "OK"
+msgstr "OK"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "More Options"
-msgstr "Допълнителни опции"
+msgid "Yugoslavian (latin)"
+msgstr "Югославска (латиница)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "When"
-msgstr "Кога"
+msgid "Installing"
+msgstr "Инсталирам"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Where"
-msgstr "Къде"
+msgid "Launch userdrake"
+msgstr "Стартира userdrake"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "What"
-msgstr "Какво"
+msgid "Is this an install or an upgrade?"
+msgstr "Това нова инсталация ли е или обновяване ?"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
+msgid "ISDN card"
+msgstr "ISDN карта"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "Send mail report after each backup to:"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
 "\n"
-"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
+"Поздравления, мрежовате и Интернет настройката е завършена.\n"
+"\n"
+"Настройките ще бъдат приложени към системата ви.\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
+msgid "\t-Hard drive.\n"
 msgstr ""
-"Моля, изберете\n"
-"носител за резервно копие."
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "Моля, изберете пакетите, които искате да инсталирате."
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Use daemon"
-msgstr "Използва демон"
+msgid "Printer on remote CUPS server"
+msgstr "Принтер на отдалечен CUPS сървър"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "monthly"
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
 msgstr ""
+"Неспешно премахване на принтер \"%s\" от Star Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "weekly"
-msgstr ""
+msgid "delete"
+msgstr "изтрива"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "daily"
+msgid "here if no."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "Име на хост:"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "hourly"
+msgid "The maximum lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "HardDrive / NFS"
-msgstr "Твърд диск / NFS"
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "Моля, изберете към кой сериен порт е свързана мишката ви."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr "CDROM / DVDROM"
+msgid "Did it work properly?"
+msgstr "Проработи ли както трябва ?"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Please enter the directory to save to:"
-msgstr "Моля веведете директорията за запазване:"
+msgid "Poor"
+msgstr "Лошо"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please check if you want to eject your tape after the backup."
+msgid "The DHCP start range"
 msgstr ""
-"Моля, проверете дали искте да извадите лентата след като правите резервно "
-"копие."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr ""
-"Моля, проверете дали искте да изтриете лентата преди да правите резервно "
-"копие."
+msgid "Grenada"
+msgstr "Гренада"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "Моля, проверете дали искте да изполвате непренавивашо се устройство."
+msgid "Unsafe"
+msgstr "Опасен"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid ", %s sectors"
+msgstr ", %s сектора"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Use tape to backup"
-msgstr "Използва лента за резервно копие"
+msgid "No"
+msgstr "Не"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No CD device defined!"
-msgstr "Не е дифинирано CD устройство!"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
+"Дали вашият принтер е многофункционално устройство от HP или Sony "
+"(OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 със скенер, Sony IJP-"
+"V100), HP PhotoSmart или HP LaserJet 2200?"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "Guadeloupe"
+msgstr "Гваделупа"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "could not find any font.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Моля, проверете дали използвате DVDRAM устройство"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr "Искате ли BackSpace да подава Delete на конзолата ?"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Моля, проверете дали използвате DVDR устройство"
+msgid "Vertical refresh rate"
+msgstr "Вертикална скорост на възстановяване"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
 #, c-format
-msgid " Erase Now "
-msgstr " Изтрива сега "
+msgid "Entering step `%s'\n"
+msgstr "Навлизам в етап `%s'\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "Моля, цъкнете на носителя"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Моля, проверете дали използвате CDRW медия"
+msgid "Removing %s ..."
+msgstr "Изтриване на %s ..."
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "Моля, цъкнете на носителя"
+#: ../../lang.pm:1
+#, c-format
+msgid "Niger"
+msgstr "Нигер"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "Моля, изберете размера на вашето CD/DVD (Mb)"
+msgid "No printer"
+msgstr "Няма принтер"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
-msgstr ""
+msgid "alert configuration"
+msgstr "конфигурация на тревога"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
-msgstr ""
+msgid "NetWare Printer Options"
+msgstr "Опции за NetWare принтер"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Need hostname, username and password!"
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Remember this password"
-msgstr "Запомня тази парола"
+msgid "General"
+msgstr "Основно"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please enter your password"
-msgstr "Моля, въведете вашата парола"
+msgid "Printing system: "
+msgstr "Печатна система: "
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please enter your login"
-msgstr "Моля, въведете вашият логин"
+msgid "Add a user"
+msgstr "Добавяне на потребител"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
-msgstr ""
+msgid "Network configuration (%d adapters)"
+msgstr "Настройка на мрежата (%d адаптера)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid "Please enter the host name or IP."
-msgstr "Моля, въведете име на хост или IP."
+msgid "Mandatory package %s is missing"
+msgstr "Задължителният пакет %s липсва"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
-msgstr ""
+msgid "Philippines"
+msgstr "Филипини"
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
+#, c-format
+msgid "Ok"
+msgstr "Ok"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "Име на печатната опашката"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "Искате ли да използвате aboot ?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Беларуска"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"  Transfer  \n"
-"Now"
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
-"  Прехвърля  \n"
-"Сега"
+"PDQ поддържа само локални принтери, отдалечени LPD принтери и Socket/TCP "
+"принтери.\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Move files to the new partition"
+msgstr "Премести файловете на нов дял"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use Expect for SSH"
-msgstr ""
+msgid "Restore From Catalog"
+msgstr "Възстановява от каталог"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "Pitcairn"
+msgstr "Питкеърн"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "Лош backup-файл"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Users"
-msgstr "Потребители"
+msgid "group :"
+msgstr "група :"
 
-#: ../../standalone/drakbackup:1
+#: ../../fs.pm:1
 #, c-format
-msgid "Windows (FAT32)"
-msgstr "Windows (FAT32)"
+msgid "mounting partition %s in directory %s failed"
+msgstr "монтирането на дял %s в директория %s пропадна"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
+msgid "Lilo screen"
+msgstr "Lilo екран"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid "Remove Selected"
-msgstr "Изтриване на оизбраните"
+msgid "LILO with graphical menu"
+msgstr "LILO с графично меню"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Estimating"
+msgstr "Пресмятане"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "Моля, изберете пакетите, които искате да инсталирате."
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't unselect this package. It is already installed"
+msgstr "Не можете да оставите този пакет немаркиран. Той вече е инсталиран"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr ", принтер \"%s\" на SMB/Windows сървър \"%s\""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr "Не включва критични файлове (passwd, group, fstab)"
+msgid "Go on anyway?"
+msgstr "Да продължа ли все пак ?"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "Търся налични пакети и препостроявам rpm базата данни..."
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
+msgid "Does not appear to be recordable media!"
 msgstr ""
-"Използва инкрементално създаване на резервно копие ( не замена старите)"
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "Резервно копие на вашите системни файлове (/etc директория)"
+msgid "Specify options"
+msgstr "Задай опции"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
-msgstr ""
+msgid "Vanuatu"
+msgstr "Вануату"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Either the server name or the server's IP must be given!"
+msgstr "Трябва да бъдат зададени и името и IP адреса на сървъра !"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"Клиентскят bootdisk е необходим за стартиране в Linux системата ви "
+"независимо\n"
+"от обикновения bootloader. Това е полезно, ако не искате да инсталирате\n"
+"SILO на системата си, ако някоя друга операционна система махне SILO\n"
+"или ако SILO не работи с хардуерната ви настройка. Клиентският bootdisk\n"
+"може да бъде използван със\n"
+"спасителният образ на Mandrake, улесняваки възстановяването при редки\n"
+"случаи на срив.\n"
+"\n"
+"Ако искате да създадете bootdisk за вашата система, поставете дискета в\n"
+"първото устройство и натиснете \"Ok\"."
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "You can't use an encrypted file system for mount point %s"
 msgstr ""
+"Вие не може да използвате криптирана файлова система за точка на монтиране %s"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "File Selection"
-msgstr "Избор на файл"
+msgid "Norfolk Island"
+msgstr "Норфолк Остров"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Can't create catalog!"
-msgstr ""
+msgid "Theme installation failed!"
+msgstr "Инсталацията на тема е неуспешна!"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid " Error while sending mail. \n"
-msgstr " Грешка по време на изпращане на поща. \n"
+msgid "Nothing to do"
+msgstr "Няма нищо за правене"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
-msgstr ""
+msgid "Use for loopback"
+msgstr "Използвай за loopback"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "използвай PPPOE"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Moving files to the new partition"
+msgstr "Премести файловете на нов дял"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s с ЕКСПЕРИМЕНТАЛНO хардуерно 3D ускорение"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid "No changes to backup!"
-msgstr "Няма промени за резервно копие!"
+msgid "Advanced"
+msgstr "Напредничав"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "Лош backup-файл"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Transfer"
+msgstr "Прехвърли"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Backup Other files..."
-msgstr "Резервно копие на други файлове..."
+msgid "Dvorak (Swedish)"
+msgstr "Дворак (Шведска)"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
-msgstr "Прогрес за резервно копие на твърд диск..."
+msgid "More Options"
+msgstr "Допълнителни опции"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Backup User files..."
-msgstr "Резервно копие на потребителски файлове..."
+msgid "Afghanistan"
+msgstr "Афганистан"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Backup system files..."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "No tape in %s!"
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron е стандартна UNIX програма, която периодично пуска определени програми\n"
+"по разписание. vixie cron добавя множество преимущества над тези на простия\n"
+"UNIX cron, включително по-добра сигурност и мощни настройващи опции."
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+msgid "Burundi"
+msgstr "Бурунди"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Add Client -->"
+msgstr "Добавя клиент -->"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Not erasable media!"
-msgstr ""
+msgid "Read carefully!"
+msgstr "Прочетете внимателно !"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Does not appear to be recordable media!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "WebDAV transfer failed!"
-msgstr ""
+msgid "Port"
+msgstr "Порт"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Total progess"
-msgstr "Общ прогрес"
+msgid "No kernel selected!"
+msgstr "Няма избрано ядро!"
 
-#: ../../standalone/drakbackup:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "Натиснете 'enter' за да стартирате избраната ОС, 'e' да редактирате"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s not responding"
-msgstr ""
+msgid "Set-GID"
+msgstr "Задава-GID"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Can't find %s on %s"
-msgstr "Не мога да намеря %s на %s"
+msgid "The encryption keys do not match"
+msgstr "Ключовете за криптиране не съвпадат"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
-msgstr ""
+msgid "Right \"Windows\" key"
+msgstr "Десен \"Windows\" клавиш"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bad password on %s"
-msgstr "Лоша парола на %s"
+msgid "CDROM / DVDROM"
+msgstr "CDROM / DVDROM"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "No password prompt on %s at port %s"
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "ERROR: Cannot spawn %s."
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
+"Преди да продължите, трябва внимателно да прочетете условията на лиценза. "
+"Той\n"
+"покрива цялата Mandrake Linux дистрибуция, и, ако не сте съгласни с всички "
+"условия\n"
+"в него, цъкнете на бутона Отказ. Това незабавно ще приключи инсталацията. За "
+"да\n"
+"продължите с инсталацията, цъкнете на бутона Приеми."
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
+"\n"
 msgstr ""
+"Това е списък от налични за печат опции отнасящи се за текущият принтер:\n"
+"\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolutions"
+msgstr "Разделителна способност"
+
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"%s exists, delete?\n"
+"drakfirewall configurator\n"
 "\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
+"Настройчик за малка защитна стена\n"
+"\n"
+"Това настройва персонална защитна стена за тази Mandrake Linux машина.\n"
+"За мощно постветено на защитата решение, моле, погледнете специализираната\n"
+"MandrakeSecurity Firewall дистрибуция."
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
+"Моля, въведете вашето име, парола и име на домейн за достъп до този хост."
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "Изтриване на опашката"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Network configuration"
+msgstr "Настройка на мрежата"
+
+#: ../../any.pm:1
+#, c-format
+msgid "No sharing"
+msgstr "Не поделя"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
+msgstr "Премества избраното правило едно ниво надолу"
+
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "ТБ"
 
 #: ../../standalone/drakbackup:1
 #, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "Моля, проверете дали използвате DVDR устройство"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "FATAL"
+msgstr "ФАТАЛНО"
+
+#: ../../standalone/drakpxe:1
+#, c-format
 msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
+"The network address is %s using a netmask of %s.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Delete"
+msgstr "Изтрий"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"                      DrakBackup Report \n"
-"\n"
+"Allow/Forbid reboot by the console user."
 msgstr ""
+"Arguments: (arg)\n"
 "\n"
-"                      DrakBackup Рапорт \n"
-"\n"
+"Позволява/Забранява престартиране от потребител на конзола."
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "INFO"
-msgstr "ИНФО"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"Kомпютъра ви може автоматично, да влезе в X при стартиране.\n"
+"Искате ли X да се стартира, когато рестартирате системата?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "FATAL"
-msgstr "ФАТАЛНО"
+msgid "Build the disk"
+msgstr "Създай дискът"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "WARNING"
-msgstr ""
+msgid "Disconnect %s"
+msgstr "Разкачва %s"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Status:"
+msgstr "Състояние:"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "SSH Server"
+msgstr "SSH Сървър"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cron not available yet as non-root"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "Инсталацията на %s провалена. Появи се следната грешка:"
+msgid "European protocol"
+msgstr "Европейски протокол"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "Не, не искам autologin"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ", принтер \"%s\" на сървър \"%s\""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "Да, искам autologin с това (потребител, десктоп)"
+msgid "Error"
+msgstr "Грешка"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "Пусни X-Window системата при стартиране"
+msgid "allow \"su\""
+msgstr "позволява \"su\""
 
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "System mode"
-msgstr "Системен режим"
+msgid "Australia"
+msgstr "Австралия"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Bootsplash"
+msgid "please wait during ttmkfdir..."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Lilo screen"
-msgstr "Lilo екран"
+msgid "Configure only card \"%s\"%s"
+msgstr "Настройка само на карта \"%s\"(%s)"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Level"
+msgstr "Ниво"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Themes"
-msgstr "Теми"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "Запази избор на пакети"
+msgid "Change the printing system"
+msgstr "Промяна системата за печат"
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
-"В момента използвате %s като програма за стартиране.\n"
-"Цъкнете на Настройка, за да стартирате установяващия магьосник."
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
-msgstr "LiLo и Bootsplash теми са успешно инсталирани"
-
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Theme installation failed!"
-msgstr "Инсталацията на тема е неуспешна!"
+msgid "Configure services"
+msgstr "Настройка на услугите"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Notice"
-msgstr "Бележка"
+msgid "Broadcast Address:"
+msgstr "Broadcast адрес:"
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Relaunch 'lilo'"
-msgstr "Престартира 'lilo'"
+msgid "mount failed: "
+msgstr "монтирането не успя: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr "Прави initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+msgid "Image"
+msgstr "Образ"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
-msgstr "Не мога да стартирам mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgstr ""
+"Неуспех при добавяне на принтер \"%s\" на Star Office/OpenOffice.org/GIMP."
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, c-format
+msgid "Remote Administration"
+msgstr "Отдалечена администрация"
+
+#: ../../modules.pm:1
 #, c-format
 msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
-"Не мога да пиша в /etc/sysconfig/bootsplash\n"
-"Файла не е намерен."
+"PCMCIA подръжката няма повече да същесвтува за ядро 2.2. Моля, използвайте "
+"2.4"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Write %s"
-msgstr "Пише %s"
+msgid "Selected All"
+msgstr "Избира всичко"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr "Не мога да пиша в /etc/sysconfig/bootsplash."
+msgid "CUPS - Common Unix Printing System"
+msgstr "CUPS - Обща Unix Принтерна Система"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Lilo message not found"
-msgstr "Lilo съобщение не е намерено"
+msgid "Webmin Service"
+msgstr "Webmin Обслужване"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Copy %s to %s"
-msgstr "Копира %s в %s"
+msgid "device"
+msgstr "устройство"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Backup %s to %s.old"
-msgstr "Резервно копие %s в  %s.old"
+msgid "All"
+msgstr "Всички"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Create new theme"
-msgstr "Създава нова тема"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "Коя принтерна система (spooler) изкате да използвате ?"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
-"Показва тема\n"
-"на конзола"
+msgid "Greece"
+msgstr "Гърция"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Install themes"
-msgstr "Инсталиране на теми"
+msgid "An error occurred"
+msgstr "Появи се грешка"
 
-#: ../../standalone/drakboot:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Lilo/grub mode"
-msgstr "Режим на Lilo/grub"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"Този пакет трябва да бъде обновен\n"
+"Сигурни ли сте, че искате да го изключите ?"
 
-#: ../../standalone/drakboot:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Yaboot mode"
-msgstr "Режим на Yaboot"
+msgid "Tamil (Typewriter-layout)"
+msgstr "Тамилска (пишеща машина)"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "manual"
+msgstr "ръчно"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/Файл/_Излиза"
+msgid "Printer manufacturer, model, driver"
+msgstr "Производител на принтера, модел, драйвер"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "/_File"
-msgstr "/_Файл"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"Няма носител в устойството или е защитена от писане %s.\n"
+"Моля поставете един."
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Настройка на начина на стартиране"
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
+msgstr ""
+"Директорията %s вече съдържа някакви данни\n"
+"(%s)"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "No browser available! Please install one"
-msgstr "Няма налична програма за преглед! Моля изберете една"
+msgid "Printer on NetWare server"
+msgstr "Принтер на NetWare сървър"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
-msgstr ""
+msgid "Give the ram size in MB"
+msgstr "Дава размера RAM-памет в Mb"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Package not installed"
-msgstr "Пакета не е инсталиран"
+msgid "Real name"
+msgstr "Истинско име"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Not installed"
-msgstr "Не е инсталиран"
+msgid "done"
+msgstr "готово"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Standalone Tools"
-msgstr "Конзолни инструменти"
+msgid "Please uncheck or remove it on next time."
+msgstr "Моля, изберете сериен порт към който свързан модемът ви."
 
-#: ../../standalone/drakbug:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Report"
-msgstr "Рапорт"
+msgid "Higher"
+msgstr "По-високо"
 
-#: ../../standalone/drakbug:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "Изберете дяловете, които искате да форматирате"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
 "\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Release: "
-msgstr "Моля изчакайте"
-
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Package: "
-msgstr "Пакет: "
+msgid "Can't find %s on %s"
+msgstr "Не мога да намеря %s на %s"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Application:"
-msgstr "Приложение:"
+msgid "Japanese 106 keys"
+msgstr "Японска 106 клавиша"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configuration Wizards"
-msgstr "Конфигурационни Магьосници"
+msgid "This will take a few minutes."
+msgstr "Това ще отнеме няколко минути."
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Userdrake"
-msgstr "Userdrake"
+msgid "Burkina Faso"
+msgstr "Буркина Фасо"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Windows Migration tool"
+msgid "Use scanners on remote computers"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Urpmi"
-msgstr ""
+msgid "Delete selected rule"
+msgstr "Изтрива избраното правило"
 
-#: ../../standalone/drakbug:1
-#, c-format
-msgid "Software Manager"
-msgstr "Софтуерен мениджър"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Принтер на отдалечен CUPS сървър"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remote Control"
-msgstr "Отдалечен контрол"
+msgid "Insert a floppy in %s"
+msgstr "Сложете дискета в устройство %s"
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Msec"
-msgstr "Мсек"
+msgid "Maldives"
+msgstr "Малдиви"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Menudrake"
-msgstr "Menudrake"
+msgid "compact"
+msgstr "компактен"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "Mandrake Online"
-msgstr "Mandrake Online"
+msgid "1 minute"
+msgstr "1 минута"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "on channel %d id %d\n"
+msgstr "на канал %d id %d\n"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Synchronization tool"
-msgstr ""
+msgid ", multi-function device"
+msgstr ", многофункционално устройство"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "First Time Wizard"
-msgstr "Добре дошли в първоначалния помощник"
+#: ../../lang.pm:1
+#, c-format
+msgid "Laos"
+msgstr "Лаос"
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Mandrake Control Center"
-msgstr "Контролен център на Mandrake"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "Няма FAT дялове за смяна на големината (или няма достаъчно място)"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Parameters"
-msgstr "Параметри"
+msgid "Firewall"
+msgstr "Защитна стена"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "Настройка на Интернет връзка"
+msgid "Area:"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP клиент"
+msgid "(E)IDE/ATA controllers"
+msgstr "(E)IDE/ATA контролери"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet карта"
+msgid "Printer Server"
+msgstr "Сървър на принтера"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "Gateway"
+msgid "Disconnection from the Internet complete."
+msgstr "Разкачването от Интернет е завършило"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Connection type: "
-msgstr "Тип на връзката: "
+msgid "Custom configuration"
+msgstr "Потребителска настройка"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Профил: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "Настройка на Интернет връзка"
+msgid "Saint Pierre and Miquelon"
+msgstr "Свети Пиер и Микелон"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
-"Нямате Internet връзка.\n"
-"Създайте такава, като цъкнете на 'Настрой'"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "activate now"
-msgstr "активирай сега"
+msgid "Portugal"
+msgstr "Португалия"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "deactivate now"
-msgstr "деактивирай сега"
+msgid "Do you have another one?"
+msgstr "Имате ли друг(и) ?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "DHCP client"
-msgstr "DHCP клиент"
+msgid ", printing to %s"
+msgstr ", печат на %s"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "Моля, пробвайте мишката си"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "Пуснат при стартиране"
+msgid "Toggle to normal mode"
+msgstr "Премини в Нормален режим"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Стартиращ протокол"
+msgid "Generic"
+msgstr "Общ"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Adapter %s: %s"
-msgstr "Адаптер %s: %s"
+msgid "Cylinder %d to %d\n"
+msgstr "От цилиндър %d до цилиндър %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "Настройка на локална мрежа"
+msgid "New profile..."
+msgstr "Нов профил ..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN configuration"
-msgstr "Настройка на LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "На кой диск искате да го преместите ?"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
-msgstr ""
-"Нямате настроен интерфейс.\n"
-"Настройте ги преди това, като цъкнете на 'Настройка'"
+msgid "Display logo on Console"
+msgstr "Показва лого на Конзола"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Connect..."
-msgstr "Свързване ..."
+msgid "Windows Domain"
+msgstr "Windows домейн"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Disconnect..."
-msgstr "Отвързване ..."
+msgid "Interface %s (on network %s)"
+msgstr "Интерфейс %s (на мрежа %s)"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "Не свързан"
+msgid "INFO"
+msgstr "ИНФО"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connected"
-msgstr "Свързан"
+msgid "Wallis and Futuna"
+msgstr "Уолис и Футуна Острови"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Need to create /etc/dhcpd.conf first!"
+msgstr "Трябва да създадете първо /etc/dhcpd.conf!"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Is FPU present"
+msgstr ""
+
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+"No additional information\n"
+"about this service, sorry."
 msgstr ""
+"Няма допълнителна информация\n"
+"за тази услуга, съжелявам."
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Interface:"
-msgstr "Интерфейс:"
+msgid "Build Single NIC -->"
+msgstr "Построява единичен  NIC -->"
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Gateway:"
-msgstr "Gateway:"
+msgid "Is this correct?"
+msgstr "Всичко правилно ли е ?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Apply"
-msgstr "Приложи"
+msgid "Marshall Islands"
+msgstr "Маршалови Острови"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Click here to launch the wizard ->"
-msgstr "Цъкнете тук, за да стартирате магьосника ->"
+msgid "Windows (FAT32)"
+msgstr "Windows (FAT32)"
 
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Магьосник..."
+msgid "Root password"
+msgstr "Въведете парола за root"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Status:"
-msgstr "Състояние:"
+msgid "Build All Kernels -->"
+msgstr "Построява всички ядра -->"
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Type:"
-msgstr "Тип: "
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Internet access"
-msgstr "Интернет достъп"
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"Нямате swap-дял\n"
+"\n"
+"Да продължа ли все пак ?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Server IP missing!"
+msgstr "Липсва име на NCP сървър !"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "Име на хост:"
+msgid "Suriname"
+msgstr "Суринам"
 
-#: ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "Настойка на локална мрежа ..."
+msgid "Enable ACPI"
+msgstr "Стартиране от CD "
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "State"
-msgstr "Състояние"
+msgid "Graphical Environment"
+msgstr "Графична среда"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Driver"
-msgstr "Драйвер"
+msgid "Gibraltar"
+msgstr "Гибралтар"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Protocol"
-msgstr "Протокол"
+msgid "on Tape Device"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Интерфейс"
+msgid "Do nothing"
+msgstr "Не прави нищо"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "Настройка на Интернет достъпа ..."
+msgid "Delete Client"
+msgstr "Изтрива клиент"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Wait please"
-msgstr ""
+msgid "Filesystem type: "
+msgstr "Вид файлова система: "
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
-"Име на създавания профил (новият профил се създава като копие на текущия):"
+msgid "Starting network..."
+msgstr "Стартиране мрежата ...."
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "New profile..."
-msgstr "Нов профил ..."
+msgid "Vietnam"
+msgstr "Виетнам"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "Профил за изтриване:"
+msgid "/_Fields description"
+msgstr "/_Полета описание"
 
-#: ../../standalone/drakconnect:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Del profile..."
-msgstr "Изтрой профил ..."
+msgid "Optimize your security by using Mandrake Linux"
+msgstr "Оптимизира вашата сигурност"
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "Настройка на мрежата (%d адаптера)"
+msgid "Help"
+msgstr "Помощ"
 
-#: ../../standalone/drakedm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
-msgstr ""
+msgid "Your personal phone number"
+msgstr "Личния ви телефонен номер"
 
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Choosing a display manager"
-msgstr "Избор на мениджър на дисплей"
+msgid "Which size do you want to keep for Windows on"
+msgstr "Колко искате да оставите за windows?"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
-"Неможе да се затвори правилно mkbootdisk: \n"
-" %s \n"
-" %s"
+"Тестовите страници са изпратени към принтерна.\n"
+"Може да отнеме малко време преди принтера да започне.\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "Не мога да направя 'fork': %s"
+msgid "Username required"
+msgstr "Изисква потребителско име"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
-"Няма носител в устойството или е защитена от писане %s.\n"
-"Моля поставете един."
+"Обикновено, DrakX би трябвало да избере правилната за вас клавиатура (в "
+"зависимост\n"
+"от езика, който сте избрали) и няма да се наложи да видите тази стъпка. "
+"Обаче може да\n"
+"нямате клавиатура съответстваща точно на вашия език: например, ако сте "
+"англоговорящ швед,\n"
+"може би ще искате клавиатурата ви да бъде шведска. Или ако говорите "
+"aнглийски, но сте\n"
+"в Квебек, може би ще сте в същата ситуация. И в двата случая, ще трябва да "
+"се върнете\n"
+"към тази инсталационна стъпка и да изберете правилната клавиатура от "
+"списъка.\n"
+"\n"
+"Всичко, което трябва да направите, е да посочите предпочитаната клавиатурна "
+"наредба\n"
+"от списъка, който ще се появи пред вас.\n"
+"\n"
+"Ако имате клавиатура от език различен от този използван по подразбиране, "
+"цъкнете\n"
+"на бутона \"Напредничав\". Ще ви бъде предоставен пълен списък с "
+"поддържаните клавиатури."
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "Проверете имате ли дискета в устройството %s"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "Настройки на SMB (Windows 9x/NT) принтер"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Build the disk"
-msgstr "Създай дискът"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
+msgstr ""
+"Arguments: (arg)\n"
+"\n"
+"Позволява/Забранява съобщения за IPv4 грешки."
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Output"
-msgstr "Резултат"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd допълнителни аргументи"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Remove a module"
-msgstr "Премахни модула"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Add a module"
-msgstr "Добави модула"
+msgid "Protocol for the rest of the world"
+msgstr "Протокол за останалия свят"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "без scsi модули"
+msgid "Print test pages"
+msgstr "Отпечатване на тестови страници"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if needed"
-msgstr "ако е нужно"
+msgid "64 MB or more"
+msgstr "64 МБ или повече"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "без raid модули"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
+"Моля, изберете тестова страница за печат.\n"
+"Забележка: тестовата страница за снимка може да отнеме доста дълго\n"
+"време да се изпечата и на лазерни принтери с малко памет може въобще\n"
+"да не излезе. В повечето случаи е достатъчна стандартна тестова страница."
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "force"
-msgstr "принудително"
+msgid "Please select the device where your %s is attached"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd допълнителни аргументи"
+msgid "Not formatted\n"
+msgstr "Неформатиран\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Expert Area"
-msgstr "Допълнителни"
+msgid "Periodic Checks"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "kernel version"
-msgstr "версия на ядрото"
+msgid "PXE Server Configuration"
+msgstr "Конфигуриране на PXE сървър"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "default"
-msgstr "по подрабиране"
+msgid "Backup the system files before:"
+msgstr "Резервно копие на файлове преди:"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "General"
-msgstr "Основно"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
+"Това е стандартната сигурност препоръчителна за компютър, който ще бъде "
+"използван да се свързва към Интернет като клиент."
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "съдаване на стартираща дискета"
+msgid "First floppy drive"
+msgstr "Първо флопи устройство"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "/File/_Quit"
+msgstr "/Файл/_Излиза"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Size"
-msgstr "Големина"
+msgid "Dvorak"
+msgstr "Дворак"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Module name"
-msgstr "Име на модул"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "Изход от инсталационната програма"
+msgid "Choose the new size"
+msgstr "Изберете нова големина"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Remove fonts on your system"
-msgstr "Изтрива шрифтове от вашата система"
+msgid "Media class"
+msgstr "Клас носител"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Initial tests"
-msgstr "Начални тестове"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "Инсталирай"
+#: ../../lang.pm:1
+#, c-format
+msgid "Faroe Islands"
+msgstr "Острови Фаро"
 
 #: ../../standalone/drakfont:1
 #, c-format
-msgid "Install & convert Fonts"
-msgstr ""
+msgid "Restart XFS"
+msgstr "Рестартира XFS"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy fonts on your system"
-msgstr "Копира шрифтове на вашата система"
+msgid "Add host/network"
+msgstr "Добавя хост/мрежа"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Remove List"
-msgstr "Изтрива списък"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Selected All"
-msgstr "Избира всичко"
+msgid "Please enter the directory to save to:"
+msgstr "Моля веведете директорията за запазване:"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Model name"
+msgstr "Име на модел"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
-msgstr ""
+msgid "Albania"
+msgstr "Албания"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "click here if you are sure."
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "Инсталиране на системата"
+#: ../../lang.pm:1
+#, c-format
+msgid "British Indian Ocean Territory"
+msgstr "Английски територии в Индийския океан"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Normal Mode"
+msgstr "Нормален режим"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
+"Please be sure that the cron daemon is included in your services. \n"
 "\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "Принтер"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer connection type"
+msgstr "Тип на връзката към принтера"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Abiword"
-msgstr "Abiword"
+msgid "No network adapter on your system!"
+msgstr "Нямате мрежов адаптер!"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "StarOffice"
-msgstr "StarOffice"
+msgid "Network %s"
+msgstr "Мрежа %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Ghostscript"
-msgstr ""
+msgid "Malayalam"
+msgstr "Малайлам"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "Изберете приложенията които ще поддържат шрифтовете:"
+msgid "Option %s out of range!"
+msgstr "Опцията %s е извън границите !"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
-msgstr ""
+msgid "Connect %s"
+msgstr "Свързва %s"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting CUPS..."
+msgstr "Рестартира XFS"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "About"
-msgstr "Относно"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "Печатане/Сканиране/Фото картички на принтер \"%s\""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Font List"
-msgstr "Списък шрифтове"
+msgid "Duplicate mount point %s"
+msgstr "Дублирай точката на монтиране %s"
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Advanced Options"
-msgstr "Допълнителни опции"
+msgid "if set to yes, run chkrootkit checks."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Uninstall Fonts"
-msgstr "Инсталира шрифтове"
+msgid "Connection Configuration"
+msgstr "Настройка на връзката"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr "Взима шрифтове на Windows"
+msgid "Unknown|Generic"
+msgstr "Неизвестен|Общ"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
-msgid "Import Fonts"
-msgstr "Импортирт на шрифтове"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "done"
-msgstr "готово"
+msgid "Quit"
+msgstr "Изход"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "xfs restart"
-msgstr "xfs рестартира"
+msgid "Myanmar"
+msgstr "Мианмар"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
-msgstr ""
+msgid "Auto allocate"
+msgstr "Автоматично създаване"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Restart XFS"
-msgstr "Рестартира XFS"
+msgid "Check bad blocks?"
+msgstr "Проверка за лоши сектори ?"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid "Other MultiMedia devices"
+msgstr "Друга мултимедийни устройства"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "No remote machines"
+msgstr "Няма отдалечени машини"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "pfm fonts conversion"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
+"\n"
+"Добре дошли на Магьосника за конфигуриране на Принтер\n"
+"\n"
+"Тай ще ви помогне да инсталирате вашите принтери свързани към компютъра.\n"
+"\n"
+"Ако имате принтер(и) свързани към тази машина, включете ги, така че те да "
+"могат да се конфигурират автоматично.\n"
+"\n"
+"Цъкнете на \"Следващо\" когато сте готови, и на \"Прекъсва\" ако не искате "
+"да настройвате принтерите сега."
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "ttf fonts conversion"
-msgstr ""
+msgid "Authentication NIS"
+msgstr "NIS идентификация"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "Опцията ``Ограничи опциите от командния ред'' е безполезна без парола"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Fonts conversion"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "Споделянето на връзката към Интернет е вече активирано"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type install done"
-msgstr ""
+msgid "Card IO_0"
+msgstr "IO_0 на картата"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
-msgstr ""
+msgid "United Arab Emirates"
+msgstr "Обединени Арабски Емирства"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "True Type fonts installation"
-msgstr "Инсталиране на True Type шрифтове"
+msgid "Card IO_1"
+msgstr "IO_1 на картата"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fonts copy"
-msgstr "Копира шрифтове"
+msgid "Thailand"
+msgstr "Тайланд"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Search for fonts in installed list"
-msgstr ""
+msgid "Routers:"
+msgstr "Рутери:"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Kazakhstan"
+msgstr "Казахстан"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Reselect correct fonts"
+msgid "Display all available remote CUPS printers"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "Инсталация на Mandrake Linux %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "no fonts found"
-msgstr "няма намерени шрифтове"
+msgid "Thai keyboard"
+msgstr "Тайванска клавиатура"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "parse all fonts"
-msgstr ""
+msgid "Dialup options"
+msgstr "Опции за избиране по телефон"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Unselect fonts installed"
-msgstr ""
+msgid "Bouvet Island"
+msgstr "Остров Бувет"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search installed fonts"
+msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"Добре дошли в инструмента за споделяне на Интернет връзката !\n"
-"\n"
-"%s\n"
+"Сменете CD-ROM !\n"
 "\n"
-"Цъкнете ``Настрой'', ако искате да стартиране установяващия магьосник."
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "Настройка на споделянето на Интернет връзката"
+"Моля, сложете CD-ROM озаглавен \"%s\" в устройството и натиснете Ok, когато "
+"сте готови.\n"
+"Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-"
+"ROM."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "Няма настройвано споделяне на Интернет връзката."
+msgid "Polish"
+msgstr "Полска"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "Установката вече е направена и в момента е включена."
+msgid "Mandrake Online"
+msgstr "Mandrake Online"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr "Установката вече е направена, но в момента е изключена."
+msgid "\t-Network by webdav.\n"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
 msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
 msgstr ""
-"Всичко е настроено.\n"
-"Сега можете да споделите Интернет връзката си с други компютри в локалната "
-"ви мрежа използвайки автоматична мрежова настройка (DHCP)."
+"В системата не е открит ethernet мрежов адаптер. Моля, стартирайте "
+"инструмента за настройка на хардуер."
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "Проблеми с инсталирането на пакета %s"
+msgid "Netmask"
+msgstr "Мрежова маска"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr ""
-"Настройващи скриптове, инсталиране на софтуер, стартиране на сървъри..."
+msgid "No hard drives found"
+msgstr "Не е намерен твърд диск"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "Настройка ..."
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "Възможен конфикт с адресите в LAN с настройката на %s!\n"
+msgid "2 buttons"
+msgstr "2 бутона"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "Какъв е типът на ISDN връзката ?"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Label"
+msgstr "Етикет"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Save on floppy"
+msgstr "Запази на дискета"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
-msgstr ""
+msgid "Printer auto-detection"
+msgstr "Автоматично открива принтер"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The DHCP end range"
-msgstr ""
+msgid "Which of the following is your ISDN card?"
+msgstr "Коя от следните ISDN картати е вашата ?"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, c-format
-msgid "The DHCP start range"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
 msgstr ""
+"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
+"Тази услуга осигурява функционалността на NFS сървъра, който се настройва\n"
+"чрез файла /etc/exports."
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "Ново име на принтер"
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Msec"
+msgstr "Мсек"
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "The DNS Server IP"
-msgstr "DNS сървър IP"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
+msgstr ""
+"=> забележка, променен етикет:\n"
+"%s"
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "(This) DHCP Server IP"
-msgstr "(Този) DHCP сървър IP"
+msgid "Number of capture buffers:"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, c-format
+msgid "Your choice? (0/1, default `%s') "
+msgstr "Вашият избор ? (по подразбиране е `%s')"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
 "\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
+"Всички новодефинирани дялове трябва да бъдат форматирани, за да се "
+"използват\n"
+"(форматиране означава създаване на файлова система).\n"
+"\n"
+"В този момента може би искате да преформатирате някои съществуващи дялове, "
+"за\n"
+"да изтриете всякакви данни, които съдържат. Ако искате да го направите, "
+"моля\n"
+"изберете тях.\n"
+"\n"
+"Моля, отбележете, че не е необходимо да преформатирате всички дялове\n"
+"съществуващи отпреди. Трябва да преформатирате дяловете съдържащи\n"
+"операционната система (като \"/\", \"/usr\" или \"/var\"), но това не е\n"
+"задължително за дялове съдържащи данни, които искате да запазите "
+"(обикновено\n"
+"\"/home\").\n"
+"\n"
+"Моля, бъдете внимателни, когато избирате дяловете. След форматиране всички\n"
+"данни на посочените дялове ще бъдат изтрити и няма да можете да ги\n"
+"възстановите.\n"
+"\n"
+"Цъкнете \"OK\", когато сте готови да форматирате далове.\n"
+"\n"
+"Цъкнете \"Отказ\", ако искате да изберете други дялове за инсталация на "
+"новата\n"
+"си Mandrake Linux операционна система.\n"
+"\n"
+"Цъкнете \"Напредничав\", ако искате да изберете дялове, които да бъдат\n"
+"проверени за лоши блокове от диска."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Local Network adress"
-msgstr "Адрес на Локална мрежа"
+msgid "French"
+msgstr "Френска"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "Чешка (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Hardware probing in progress"
+msgstr "Прогрес на хардуерна проба"
 
 #: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "Xinetd обслужване"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#, c-format
+msgid "Summary"
+msgstr "Обобщение"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
+" (Паралелни портове: /dev/lp0, /dev/lp1, ..., съответсващи на LPT1:, "
+"LPT2:, ..., 1-ви USB принтер: /dev/usb/lp0, 2-ри USB принтер: /dev/usb/"
+"lp1, ...)."
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Current interface configuration"
-msgstr "Конфигурация на текущият интерфейс"
+msgid "Next"
+msgstr "Следващ"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Show current interface configuration"
-msgstr "Показва конфигурация на текущият интерфейс"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "Не можете да инсталирате bootloader на дяла %s\n"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
-msgstr ""
+msgid "CHAP"
+msgstr "CHAP"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Automatic reconfiguration"
-msgstr "Автоматична реконфигурация"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp/zeroconf)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
+"\n"
+"Добре дошли.\n"
+"\n"
+"Параметрите за автоинсталация са налични в секцията в ляво"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface already configured"
-msgstr "Мрежовият интерфейс вече е конфигуриран"
+msgid "Puerto Rico"
+msgstr "Пуерто Рико"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
 msgstr ""
-"Моля изберете кой мрежов адаптер да бъде включен към локалната ви мрежа."
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "Литвийска \"числова редица\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"В системата ви има само един настроен мрежов адаптер:\n"
+"Следните пакети ще бъдат изтрити за да се позволи обновяване на системата: %"
+"s\n"
 "\n"
-"%s\n"
 "\n"
-"Смятам да установя локалната ви мрежа на този адаптер."
+"Действително ли искате да изтриете тези пакети?\n"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Network interface"
-msgstr "Мрежов интерфейс"
+msgid "Anguilla"
+msgstr "Ангила"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "NIS Domain"
+msgstr "NIS домейн"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
+"\n"
+"- User Files:\n"
 msgstr ""
-"В системата не е открит ethernet мрежов адаптер. Моля, стартирайте "
-"инструмента за настройка на хардуер."
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "Нямате мрежов адаптер!"
+msgid "Antarctica"
+msgstr "Антарктика"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Interface %s"
-msgstr "Интерфейс %s"
+msgid "Mount options"
+msgstr "Опции за mount:"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Интерфейс %s (използващ модул %s)"
+msgid "Jamaica"
+msgstr "Ямайка"
 
-#: ../../standalone/drakgw:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "Xinetd обслужване"
-
-#: ../../standalone/drakgw:1
-#, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
+"Свържи чисти драйвери с блокови устройства (като дялове\n"
+"на твърдия диск), за употребята от приложения като Oracle"
 
-#: ../../standalone/drakgw:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
-"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
-"използват Интернет връзката на този компютър.\n"
-"\n"
-"Убедете се, че вие сте конфигурирали вашата Мрежа/Интернет достъп "
-"използвайки drakconnect преди да правите друго.\n"
-"\n"
-"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
-"вътрешната си мрежа (LAN)."
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Internet Connection Sharing"
-msgstr "Споделяне на връзката с Интернет"
-
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "Споделянето на Интернет в момента е включено."
+msgid "Please wait, preparing installation..."
+msgstr "Моля, изчакайте, подготвяне на инсталацията"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "Включване на сървъри ..."
+msgid "Czech (QWERTZ)"
+msgstr "Чешка (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "dismiss"
-msgstr "остави"
+msgid "Track network card id (useful for laptops)"
+msgstr "Проследяване на ID на мрежовата карта (полезно при лаптопи)"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "reconfigure"
-msgstr "пренастройка"
+msgid "The port number should be an integer!"
+msgstr "Номерът на порта трябва да е цяло число !"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "enable"
-msgstr "включи"
+msgid "You must choose an image file first!"
+msgstr "Вие трябва да изберете първо графичен файл!"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е вече завършена.\n"
-"В момента е изключена.\n"
-"\n"
-"Какво искате да направите ?"
+msgid "Restore from Hard Disk."
+msgstr "Възстановява от твърд диск."
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "Споделянето на Интернет връзката е изключено."
+msgid "Add to LVM"
+msgstr "Прибави към LVM"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "Споделянето на Интернет връзката в момента е изключено."
+msgid "DNS server"
+msgstr "DNS сървър"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "Изключване на сървъри ..."
+msgid "Trinidad and Tobago"
+msgstr "Тринидад и Тобаго"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "disable"
-msgstr "изключи"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr "LPD и LPRng не поддържа IPP принтери.\n"
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
-"Установката на Споделянето на Интернет връзката е завършена.\n"
-"В момента е включена.\n"
-"\n"
-"Какво искате да направите ?"
+msgid "simple"
+msgstr "прост"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "Споделянето на връзката към Интернет е вече активирано"
+msgid "Clear all"
+msgstr "Изчисти всичко"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
-msgstr ""
+msgid "No test pages"
+msgstr "Без тестови страници"
 
-#: ../../standalone/drakhelp:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
-msgstr ""
+msgid "Adapter %s: %s"
+msgstr "Адаптер %s: %s"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Path"
-msgstr "Път"
+msgid "Falkland Islands (Malvinas)"
+msgstr "Фолклендски Острови (Малвини)"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "group :"
-msgstr "група :"
+msgid "Unknown model"
+msgstr "Неизвестен модел"
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "user :"
-msgstr "Потребител:"
+msgid "if set to yes, check files/directories writable by everybody."
+msgstr ""
+"ако е задаено да, проверява файловете/директориите достъпни за писане от "
+"всеки."
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Path selection"
-msgstr "Избор на път"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "authentication"
+msgstr "Идентификация"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
-msgstr "при проверка, собственика и групата няма да бъдат променени"
+msgid "Backup Now"
+msgstr "Резервно копие сега"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Use group id for execution"
-msgstr "Използва id на група при изпълнение"
+msgid "/_File"
+msgstr "/_Файл"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use owner id for execution"
-msgstr "Използва id на собственик при изпълнение"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr "Премахвам принтер от Star Office/OpenOffice.org/GIMP"
 
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
+"Включи филтрирането на пакети за Linux ядра серия 2.2, за\n"
+"настрока на защитната стена, s cel защитава на машината ви от\n"
+"мрежови атаки."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Set-GID"
-msgstr "Задава-GID"
+msgid "Tamil (ISCII-layout)"
+msgstr "Тамилска (ISCII-подредба)"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set-UID"
-msgstr "Задава-UID"
+msgid "Mayotte"
+msgstr "Майот"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr "sticky-бит"
+msgid "Creating auto install floppy..."
+msgstr "Подготвям дискета с автоматична инсталация"
 
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Property"
-msgstr "Собственост"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "Локален принтер"
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Permissions"
-msgstr "Права"
+msgid "Partitioning"
+msgstr "Разделяне на дялове"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Current user"
-msgstr "Текущ потребител"
+msgid "Russia"
+msgstr "Русия"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "browse"
-msgstr "преглед"
+msgid "ethernet card(s) detected"
+msgstr "ethernet карти засечени"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Edit current rule"
-msgstr "Редактира текущото правило"
+msgid "Syslog"
+msgstr "Системен журнал"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "edit"
-msgstr "редактира"
+msgid "Can't create catalog!"
+msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Delete selected rule"
-msgstr "Изтрива избраното правило"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
+msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "delete"
-msgstr "изтрива"
+msgid "Not enough free space for auto-allocating"
+msgstr "Няма достатъчно място за автоматично разпределяне"
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Add a new rule at the end"
-msgstr "Добавя ново правило на края"
+msgid "Set root password"
+msgstr "Въведете парола за root"
 
-#: ../../standalone/drakperm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "add a rule"
-msgstr "добавя правило"
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
+"Няма свободен драйвер за вашата звукова карта (%s), но има собствени драйвер "
+"на \"%s\"."
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Move selected rule down one level"
-msgstr "Премества избраното правило едно ниво надолу"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr ""
+"След промяна големината на дяла %s, данниte върху него ще бъдат загубени"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Down"
-msgstr "Долу"
+msgid "Internet connection configuration"
+msgstr "Настройка на Интернет връзка"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Move selected rule up one level"
+msgid "Scanning for TV channels"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Up"
+msgid "Kernel:"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "select perm file to see/edit"
-msgstr ""
+msgid "/_About..."
+msgstr "/_Относно..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
-msgstr ""
+msgid "Bengali"
+msgstr "Бенгалска"
 
-#: ../../standalone/drakperm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "permissions"
-msgstr "права"
+msgid "Preference: "
+msgstr "Предпочитание: "
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "group"
-msgstr "група"
+msgid "Wizard..."
+msgstr "Магьосник..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "user"
-msgstr "Потребител"
+msgid "Services: %d activated for %d registered"
+msgstr "Услуги: %d активирани от %d регистрирани"
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid "path"
-msgstr ""
+msgid "Create a bootdisk"
+msgstr "Създаване на boot-дискета"
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "Местоположение на auto_install.cfg файл"
+msgid "Solomon Islands"
+msgstr "Соломонови Острови"
 
-#: ../../standalone/drakpxe:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "(module %s)"
+msgstr "(модул %s)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Workgroup"
+msgstr "Работна група"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer host name or IP"
+msgstr "Име на хост за принтера или IP"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "No image found"
-msgstr "Локален принтер"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr "Името на принтера трябва да съдържа само букви, числа и подчертавка"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "Xpmac (инсталация графичен драйвер)"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Show current interface configuration"
+msgstr "Показва конфигурация на текущият интерфейс"
 
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "Разработка"
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "The DHCP end ip"
-msgstr ""
+msgid "Done"
+msgstr "Готово"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "Web Server"
+msgstr "Web Сървър"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid "\tDo not include System Files\n"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Интерфейс %s (на мрежа %s)"
+msgid "Chile"
+msgstr "Чили"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
+msgid ""
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
-"Моля, изберете кой мрежов адаптер да използвам за връзка към dhcp сървър."
+"Inkjet принтерните драйвери предоставени от Lexmark поддържат само локални "
+"принтери, без принтери на отдалечени машини или принтерни машини. Моля, "
+"свържете принтера си на локален порт или го настройте на машината, към която "
+"е свързан."
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: ../../printer/printerdrake.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
-"На път сте да настроите компютъра си така, че да поделя Интернет връзката\n"
-"си. С тази възможност, други компютри в локалната ви мрежа ще могат да\n"
-"използват Интернет връзката на този компютър.\n"
-"\n"
-"Отбележете: трябва ви отделен за това мрежов адаптер, за да установите "
-"вътрешната си мрежа (LAN)."
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installation Server Configuration"
-msgstr "Конфигуриране на Инсталационен Сървър"
+msgid "(already added %s)"
+msgstr "(вече прибавих %s)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "PXE Server Configuration"
-msgstr "Конфигуриране на PXE сървър"
+msgid ", using command %s"
+msgstr ", използва команда %s"
 
-#: ../../standalone/draksec:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Please wait, setting security options..."
-msgstr "Моля, изчакайте, установявам опциите по защита..."
+msgid "Alt and Shift keys simultaneously"
+msgstr "Alt и Shift клавиши едновременно"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Please wait, setting security level..."
-msgstr "Моля, изберете ниво на сигурност..."
+msgid "Flags"
+msgstr "Флагове"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Periodic Checks"
+msgid "Add/Del Users"
+msgstr "Добавя/Изтрива потребители"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "System Options"
-msgstr "Системни опции"
+msgid "weekly"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Network Options"
-msgstr "Мрежови опции"
+msgid "Settings"
+msgstr "Настройки"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr "Въведеният хост/мрежа IP не е правилен.\n"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Here is the full list of available countries"
+msgstr "Ето пълен списък на достръпните страни"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Alternative test page (A4)"
+msgstr "Алтернативна тестова страница (А4)"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"Ако имате всички CD-та от списъка по-горе, натиснете Ok.\n"
+"Ако нямате нито едно от тези CD-та, натиснете Отмяна.\n"
+"Ако ви липсват някои CD-та, махнете ги, и натиснете Ok. "
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Security Administrator:"
-msgstr "Администратор по защита:"
+msgid "Wait please"
+msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Security Alerts:"
-msgstr "Предупреждения за защита:"
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Security Level:"
-msgstr "Ниво на сигурност:"
+msgid "Backup user files"
+msgstr "Резервно копие на потребителски файлове"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "(default value: %s)"
-msgstr "(подразбираща стойност: %s)"
+msgid "New"
+msgstr "Нов"
 
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
 
-#: ../../standalone/draksound:1
-#, c-format
+#: ../../help.pm:1
+#, fuzzy, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
+"В този момент, трябва да изберете нивото на сигурност, което искате за\n"
+"машината. По правило, колкото повече машината ви е достъпна и колкото "
+"повече\n"
+"данни се съхраняват на нея, толкова по-високо трябва да е нивото на "
+"сигурност.\n"
+"Въпреки това, високата сигурност е за сметка на лекотата на работа.\n"
+"Обърнете се към главата MSEC на Reference Manual, за да получите повече "
+"информация\n"
+"за значението на тези нива.\n"
+"\n"
+"Ако не знаете както да изберете, изберете опцията по подразбиране."
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No Sound Card detected!"
-msgstr "Няма намерена звукова карта!"
+msgid "Load from floppy"
+msgstr "Зареди от дискета"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr ""
+msgid "The following printer was auto-detected. "
+msgstr "Следните принтери са автоматично открити. "
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Generating preview ..."
-msgstr "Генерирам преглед..."
+msgid "Boot Floppy"
+msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "You must choose an image file first!"
-msgstr "Вие трябва да изберете първо графичен файл!"
+msgid "Norwegian"
+msgstr "Норвежка"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Searching for new scanners ..."
+msgstr "Локален принтер"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "ProgressBar color selection"
-msgstr "Избор на цвят за лентата на прогрес"
+msgid "Apache World Wide Web Server"
+msgstr "Apache World Wide Web Сървър"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
+msgid "select path to restore (instead of /)"
+msgstr "избор на път за възстановяване (вместо /)"
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "choose image file"
-msgstr "Изберете файл"
+msgid "Configure bootsplash picture"
+msgstr "Настройка на услугите"
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image"
-msgstr "Изберете файл"
+#: ../../lang.pm:1
+#, c-format
+msgid "China"
+msgstr "Китай"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr " (Убедете се, че принтерите са свързани и включени).\n"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Georgia"
+msgstr "Грузия"
+
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "Настройка на услугите"
+msgid "Reading data of installed printers..."
+msgstr "Локален принтер"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Make kernel message quiet by default"
+msgid " Erase Now "
+msgstr " Изтрива сега "
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "server"
+msgstr "сървър"
+
+#: ../../install_any.pm:1
+#, c-format
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "Сложете FAT форматирана дискета в устройство %s"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Display logo on Console"
-msgstr "Показва лого на Конзола"
+msgid "Please Wait... Applying the configuration"
+msgstr "Моля, почакайте ... Прилагане на настройките"
 
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Choose color"
-msgstr "Изберор на цвят"
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "Добре дошли в GRUB ,за избор на операционната система!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Save theme"
-msgstr "Запазва тема"
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Preview"
-msgstr "Преглед"
+msgid "SCSI controllers"
+msgstr "SCSI контролери"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "the color of the progress bar"
-msgstr "цветът на лентата за прогрес"
+msgid " on LPD server \"%s\", printer \"%s\""
+msgstr " на LPD сървър \"%s\", принтер \"%s\""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr "височината на лентата за прогрес"
+msgid "Choosing a display manager"
+msgstr "Избор на мениджър на дисплей"
 
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Zeroconf Host name"
+msgstr "Име на хост:"
+
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr "ширината на лентата за прогрес"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "IP адресът трябва да бъде във формат 1.2.3.4"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
-msgstr ""
-"лентата за прогрес y координати\n"
-"от горният ляв ъгъл"
+msgid "Ecuador"
+msgstr "Еквадор"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
-"лентата за прогрес x координати\n"
-"от горният ляв ъгъл"
+msgid "Add an item"
+msgstr "Добавяне на обект"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "text box height"
-msgstr "височина на рамка за текст"
+msgid "The printers on this machine are available to other computers"
+msgstr "Принтерите на тази машина с достъпни за другите компютри"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "text width"
-msgstr "ширина на текст"
+msgid "I can't find needed image file `%s'."
+msgstr "Не мога да намеря нужна картинка `%s'."
 
-#: ../../standalone/draksplash:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
-"y координати на текстовата рамка\n"
-"в брой символи"
+msgid "No sound card detected. Try \"harddrake\" after installation"
+msgstr "Няма открита звукова карта. Опитайте \"harddrake\" след инсталацията"
 
-#: ../../standalone/draksplash:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
-"x координати на текстовата рамка\n"
-"в брой символи"
+"Зададен е грешен порт: %s.\n"
+"Форматът е \"port/tcp\" или \"port/udp\", \n"
+"където порт е между 1 и 65535."
 
-#: ../../standalone/draksplash:1
+#: ../../any.pm:1
 #, c-format
-msgid "Browse"
-msgstr "Преглед"
+msgid "Shell"
+msgstr "Шел"
 
-#: ../../standalone/draksplash:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Theme name"
-msgstr "Име на тема"
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "Разделителна способност"
+#: ../../lang.pm:1
+#, c-format
+msgid "Sao Tome and Principe"
+msgstr "Сао Томе и Принсипи"
 
-#: ../../standalone/draksplash:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "first step creation"
-msgstr "първа стъпка на създаване"
+msgid "Can't login using username %s (bad password?)"
+msgstr "Не мога да вляза като използвам име %s (грешна парола?)"
 
-#: ../../standalone/draksplash:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Azerbaidjani (latin)"
+msgstr "Азербайджанска (латиница)"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "Package not installed"
+msgstr "Пакета не е инсталиран"
 
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "No TV Card detected!"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "Станете MandrakeExpert"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+msgid "American Samoa"
+msgstr "Американска Самоа"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Have a nice day!"
-msgstr ""
+msgid "Protocol"
+msgstr "Протокол"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "XawTV isn't installed!"
-msgstr ""
+msgid "Copy fonts on your system"
+msgstr "Копира шрифтове на вашата система"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "Появи се грешка при сканиране за TV канали"
+msgid "Harddrake help"
+msgstr "Harddrake помощ"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Scanning for TV channels"
-msgstr ""
+msgid "Bogomips"
+msgstr "Богомипс"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
-msgstr ""
+msgid "Mandrake Terminal Server Configuration"
+msgstr "Конфигурация на Терминален Сървър в Mandrake "
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Area:"
+msgid ""
+"\n"
+"                    DrakBackup Report Details\n"
+"\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "TV norm:"
+msgid "Restore all backups"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
-msgstr ""
+msgid "if set to yes, check open ports."
+msgstr "ако е зададено да, проверява отворените портове"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Australian Optus cable TV"
+msgid "This may take a moment to erase the media."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Newzealand"
+msgid "You can't select/unselect this package"
+msgstr "Не можете да отбележете/деотбележете този пакет"
+
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "Warning"
+msgstr "Предупреждение"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "France [SECAM]"
-msgstr "Франция [SECAM]"
+msgid "Remote host name"
+msgstr "Име на отдалечен хост"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "East Europe"
-msgstr "Източна Европа"
+msgid "deactivate now"
+msgstr "деактивирай сега"
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "West Europe"
-msgstr "Западна Европа"
+msgid "access to X programs"
+msgstr "достъп до X програми"
 
-#: ../../standalone/drakxtv:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Computing the size of the Windows partition"
+msgstr "Изчислява свободното място на Windows дял"
 
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #: ../../standalone/drakxtv:1
 #, c-format
-msgid "Japan (cable)"
-msgstr ""
+msgid "Italy"
+msgstr "Италия"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Name of printer"
+msgstr "Име на принтер"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Canada (cable)"
-msgstr "Канада (кабел)"
+msgid "disable"
+msgstr "изключи"
 
-#: ../../standalone/drakxtv:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "USA (cable-hrc)"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "грешка при демонтиране на %s: %s"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "USA (cable)"
-msgstr ""
+msgid "Do it!"
+msgstr "Направи го!"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "Cayman Islands"
+msgstr "Кайманови Острови"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"XawTV isn't installed!\n"
-"\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
-"\n"
-"\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "primary"
-msgstr "първи"
+msgid "Select model manually"
+msgstr "Избор на модел ръчно"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "secondary"
-msgstr "втори"
+msgid "Format"
+msgstr "Форматирай"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/adsl.pm:1
 #, c-format
 msgid ""
-"Click on a device in the left tree in order to display its information here."
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
 msgstr ""
+"Най-честия начин за свързване чрез ADSL е PPPOE.\n"
+"Някои връзки използват PPTP, а maлко използват DHCP.\n"
+"Ако не знаете, изберете 'използвай PPPOE'."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Неизвестен модел"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Various"
+msgstr "Различни"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "unknown"
-msgstr "Неизвестен модел"
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "Zip"
+msgstr "Zip устройство"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Running \"%s\" ..."
-msgstr "Изпълнява \"%s\" ..."
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Run config tool"
-msgstr "Изпълнява инструмент за конфигуриране"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
+msgstr ""
+"\n"
+"Отбележете принтерите, които искате да прехвърлите и цъкнете\n"
+"\"Прехвърли\"."
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Configure module"
-msgstr "Настройка на модул"
+msgid "PDQ"
+msgstr "PDQ"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Information"
-msgstr "Информация"
+msgid "Albanian"
+msgstr "Албанска"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Detected hardware"
-msgstr "Открит хардуер"
+msgid "Lithuania"
+msgstr "Литва"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "Harddrake2 version "
-msgstr "Harddrake2 версия "
+msgid "Compact"
+msgstr "Компактен"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Detection in progress"
-msgstr "Откриване в прогрес"
+msgid "Detected model: %s %s"
+msgstr "Открит модел: %s %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Author:"
-msgstr "Автор:"
+msgid "MandrakeSoft has selected the best software for you"
+msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 "Това е HardDrake, хардуерен конфигурационен инструмент на Mandrake.\n"
 "Версия:"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "About Harddrake"
-msgstr "Относно Harddrake"
+msgid "Local files"
+msgstr "Локални файлове"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "/_About..."
-msgstr "/_Относно..."
+msgid "maybe"
+msgstr "става"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr "/_Информирай за бъг"
+msgid "Panama"
+msgstr "Панама"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Select a device !"
-msgstr "Изберете устройство !"
+msgid "Monitor"
+msgstr "Монитор"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Description of the fields:\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
 "\n"
-msgstr ""
-"Описание на полетата:\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
 "\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Harddrake help"
-msgstr "Harddrake помощ"
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "/_Fields description"
-msgstr "/_Полета описание"
-
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_Помощ"
+msgid "65 thousand colors (16 bits)"
+msgstr "65 хиляди цвята (16 бита)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/_Quit"
-msgstr "/_Излиза"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "/Автоматично открива _jazz устройства"
+msgid "Size: %d KB\n"
+msgstr "Големина: %d KB\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "/Autodetect _modems"
-msgstr "/Автоматично открива _модеми"
+msgid "Remove fonts on your system"
+msgstr "Изтрива шрифтове от вашата система"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "/Autodetect _printers"
-msgstr "/Автоматично открива _принтери"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
+msgstr ""
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Опции"
+msgid "Graphical interface at startup"
+msgstr "X при стартиране на системата"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "the vendor name of the processor"
-msgstr "името на производителя на процесора"
+msgid "Please enter the directory to save:"
+msgstr "Моля, въведете директорията за запазване:"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "the vendor name of the device"
-msgstr "името на производителя на устройството"
+msgid "format of floppies supported by the drive"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "Моля, изберете типа на шината към която е свързана мишката ви."
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "Няма достатъчно дялове за RAID ниво %d\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
 msgstr ""
+"Следните принтери са настроени. Цъкнете на един от тях, за да го редактирате "
+"или за да получите информация за него."
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "Форматиране"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "the number of the processor"
-msgstr "номерът на процесора"
+msgid "Connected"
+msgstr "Свързан"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Processor ID"
-msgstr "Процесор ID"
+msgid "USB printer \\#%s"
+msgstr "USB принтер \\#%s"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "network printer port"
-msgstr "порт на мрежов принтер "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the name of the CPU"
-msgstr "името на производителя на устройството"
+msgid "Macedonian"
+msgstr "Македонска"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Name"
-msgstr "Име"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "номерът на процесора"
+msgid "Bridges and system controllers"
+msgstr "Бриджове и системни контролери"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Number of buttons"
-msgstr "Брой бутони"
+msgid "/File/_Save"
+msgstr "/Файл/_Запис"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Official vendor name of the cpu"
-msgstr ""
+msgid "Mali"
+msgstr "Мали"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Model name"
-msgstr "Име на модел"
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "No details"
+msgstr "Подробности"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
-msgstr "Генерация на cpu (напр: 8 за PentiumIII, ...)"
+msgid "very nice"
+msgstr "много добър"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Model"
-msgstr "Модел"
+msgid "Preview"
+msgstr "Преглед"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "hard disk model"
-msgstr "модел на твърд диск"
+msgid "Remote Control"
+msgstr "Отдалечен контрол"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "class of hardware device"
-msgstr "клас хардуерно устройство"
+msgid "Please select media for backup..."
+msgstr "Моля, изберете носител за възстановяване..."
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Media class"
-msgstr "Клас носител"
+msgid "XFree86 server: %s\n"
+msgstr "XFree86 сървър: %s\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Sub generation of the cpu"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP клиент"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Level"
-msgstr "Ниво"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "Грузинска (\"Руска\" наредба)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Опции"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Floppy format"
-msgstr "Форматира флопи"
+msgid "Your printer model"
+msgstr "Вашият модел принтер"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
+"\n"
+"\n"
+"(ПРЕДУПРЕЖДЕНИЕ! Вие използвате XFS за вашата коренова файлова система,\n"
+"създаването на bootdisk върху 1.44 Мб флопи няма да е успешно,\n"
+"понеже XFS се нуждае от много повече място)."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Halt bug"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "F00f bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "Конфигурация на Терминален Сървър в Mandrake "
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Save"
+msgstr "Запазва"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
-msgstr ""
+msgid "The %s is unsupported"
+msgstr "%s не се подържа"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Load the drivers for your usb devices."
+msgstr "Зареждане драйвери за вашите USB устройства."
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Disk"
+msgstr "Диск"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
-msgstr ""
+msgid "Enter a printer device URI"
+msgstr "Въведете URI на печатащо устройство"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Fdiv bug"
+msgid ""
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Флагове на CPU съобщени от ядрото"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Flags"
-msgstr "Флагове"
+msgid "Israel"
+msgstr "Израел"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "French Guiana"
+msgstr "Френска Гвиана"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Module"
-msgstr "Модул"
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr "ново динамично устройство генерирано от ядрото devfs"
+msgid "add a rule"
+msgstr "добавя правило"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New devfs device"
-msgstr "Ново devfs устройство"
+msgid "A command line must be entered!"
+msgstr "Трябва да бъде въведен команден ред!"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+msgid "Select user manually"
+msgstr "Избира потребители ръчно"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Old device file"
-msgstr "Стар файл на устроство"
+msgid "Transfer printer configuration"
+msgstr "Пренос на настройка на принтер"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This field describes the device"
-msgstr "Това поле описва устройството"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "Искатели да разрешите печат за принтерите споменати горе?\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr "Честота на процесора в Mhz"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Frequency (MHz)"
-msgstr "Честорта (MHz)"
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Порт"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "Лош backup-файл"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "Ниво на сигурност"
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
+"Сега е моментът да определите кои програми искате да бъдат инсталирани на\n"
+"системата ви. В Mandrake Linux дистрибуцията има хиляди пакети, но не е\n"
+"задължително да ги знаете наизуст.\n"
+"\n"
+"Ако извършвате стандартна инстлация от CDROM, първо ще бъдете попитани кои\n"
+"CD-та имате (в Експертен режим). Проверете заглавията на CD-тата и посочете\n"
+"кутийките съответстващи на CD-тата, с които разполагате. Цъкнете \"OK\",\n"
+"когато сте готови да продължите.\n"
+"\n"
+"Пакетите са подредени в групи съответстващи на практическата употреба на\n"
+"машината ви. Групите, сами по себе си, са подредени в четири секции:\n"
+"\n"
+" * \"Работна станция\": ако смятате да използвате машината си като работна "
+"станция,\n"
+"изберете една или повече съответните групи.\n"
+"\n"
+" * \"Разработка\": ако машината ви ще бъде използване за програмиране, "
+"изберете\n"
+"желаната(ите) група(и).\n"
+"\n"
+" * \"Сървър\": накрая, ако машината ви ще бъде използвана за сървър, ще\n"
+"можете да изберете кои от най-често използваните услуги искате да имате\n"
+"инсталирани на машината.\n"
+"\n"
+" * \"Графична среда\": тук можете да изберете предпочитаната графична "
+"среда.\n"
+"Поне една трябва да бъде избрана, ако искате да имате графична среда !\n"
+"\n"
+"Премествайки курсора на мишната над името на групата, ще видите кратък\n"
+"обясненителен текст за нея.\n"
+"\n"
+"Можете да цъкнете кутийката \"Индивидуален избор на пакети\", която е "
+"полезна,\n"
+"ако сте запознати с пакетите, които ще ви бъдат предложени или ако искате "
+"да\n"
+"имате пълен контрол над това, което да бъде инсталирано.\n"
+"\n"
+"Ако сте започнали инсталацията в режим на \"Обновяване\", можете да "
+"изключите\n"
+"всички групи, за да избегнете инсталирането на нови пакети. Това е полезно\n"
+"при поправка или обновяване на съществуващата система."
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
-msgstr "фамилия cpu (напр: 6 за i686 клас)"
+msgid "Accept user"
+msgstr "Приеми потребител"
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "Server"
+msgstr "Сървър"
 
-#: ../../standalone/harddrake2:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "Bad choice, try again\n"
+msgstr "Лош избор, опитайте отново\n"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Coma bug"
-msgstr ""
+msgid "Heard and McDonald Islands"
+msgstr "Хърд и МакДоналд Острови"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+msgid "No alternative driver"
+msgstr "Няма алтернативен драйвер"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Drive capacity"
-msgstr ""
+msgid "Toggle to expert mode"
+msgstr "Премини в Експертен режим"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
-msgstr "Размер на вторичен кеш на cpu"
+msgid "(on this machine)"
+msgstr "(на тази машина)"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Cache size"
-msgstr "Размер на кеш"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "Gateway адреса трябва да бъде във формат 1.2.3.4"
 
-#: ../../standalone/harddrake2:1
+#: ../../network/modem.pm:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Location on the bus"
-msgstr ""
+msgid "Looking at packages already installed..."
+msgstr "Търси във вече инсталираните пакети..."
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+msgid "Use Differential Backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bus identification"
-msgstr "Идентификация на шина"
+msgid "Driver"
+msgstr "Драйвер"
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
 msgstr ""
+"Linuxconf понякога урежда извършването на различни задачи\n"
+"при стартиране за поддръжка на системната настройка."
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bogomips"
-msgstr "Богомипс"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "EIDE/SCSI channel"
-msgstr "EIDE/SCSI канал"
+msgid "Printer on remote lpd server"
+msgstr "Принтер на отдалечен LPD сървър"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Channel"
-msgstr "Канал"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
-"това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)"
 
-#: ../../standalone/harddrake2:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Bus"
-msgstr "Шина"
+msgid "No mouse"
+msgstr "Без мишка"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr "списък на алтернативни драйвери за тази карта"
+msgid "Germany"
+msgstr "Германия"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Alternative drivers"
-msgstr "Алтернативни драйвери"
+msgid "Austria"
+msgstr "Австрия"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr "Искате ли BackSpace да подава Delete на конзолата ?"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgstr ""
+"Изпълнете \"sndconfig\" след инсталация за да конфигурирате вашата звукова "
+"карта"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "Моля, изберете подреждане на клавиатурата."
+msgid "Collapse Tree"
+msgstr "Изчисти дървото"
 
-#: ../../standalone/livedrake:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "Не мога да пусна обновяването !!!\n"
+msgid "Auto Install Configurator"
+msgstr "Настройчик на автоматична иснталация"
 
-#: ../../standalone/livedrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
-"Моля, сложете Инсталационния CD-ROM в устройството и натиснете Ok, когато "
-"сте готови.\n"
-"Ако го нямате, натиснете Отмяна, за да избегнете инсталирането от този CD-"
-"ROM."
+msgid "Configure networking"
+msgstr "Настойка на мрежата"
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "Смяна на CD-ROM"
+msgid "Where do you want to install the bootloader?"
+msgstr "Къде искате да инсталирате bootloader-а?"
 
-#: ../../standalone/localedrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
+"Моля, цъкнете на предпочитания език на инсталация и системна употреба.\n"
+"\n"
+"Цъкането на бутона \"Напредничав\" ще ви позволи да изберете други езици\n"
+"да бъдат инсталирани на работната ви станция. Избирането на други езици\n"
+"ще инсталира файлове специвични за езиците за системна документация и\n"
+"приложения. Например, ако имате потребители от Изпания на машината си,\n"
+"изберете английски като главен език в дървовидната форма и в секция\n"
+"\"Напредничав\" цъкнете на сивата звезда съответстваща на\n"
+"\"Испански|Испания\".\n"
+"Отбележете, че могат да бъдат инсталирани няколко езика. Веднъж избран\n"
+"някакъв локал, цъкнете бутона \"OK\", за да продължите."
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
-msgstr "Промените са запазени, но за да бъдат ефективни трябва да излезете"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr "%s не се подържа от тази версия на Mandrake Linux."
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Save as.."
-msgstr "Запази като..."
+msgid "DHCP client"
+msgstr "DHCP клиент"
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Please enter your email address below "
-msgstr "Моля, въведете долу вашият адрес на Ел. поща"
+msgid "Restoring from file %s failed: %s"
+msgstr "Възстановяването от файла %s не успя: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "alert configuration"
-msgstr "конфигурация на тревога"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (серийна, от стария тип C7)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
-msgstr "Вие ще получите тревога ако натоварването е по-високо от тази стойност"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr "Сигурни ли сте, че искте да настроите печат за тази машина?\n"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "load setting"
-msgstr "установяване на натоварване"
+msgid "New devfs device"
+msgstr "Ново devfs устройство"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "ERROR: Cannot spawn %s."
 msgstr ""
-"Вие ще получите тревога ако едно от изброените обслужвания не се изпълнява "
-"повече"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "service setting"
-msgstr "установяване на обслужвания"
+msgid "Boot Style Configuration"
+msgstr "Настройка на начина на стартиране"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Автоматична синхронизация на времето (използва NTP)"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Xinetd Service"
-msgstr "Xinetd обслужване"
+msgid "Backup files not found at %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Webmin Service"
-msgstr "Webmin Обслужване"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr "Благодарим ви, че избрахте Mandrake Linux 9.1"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "SSH Server"
-msgstr "SSH Сървър"
+msgid "Armenian (phonetic)"
+msgstr "Арменска (фонетичен)"
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Samba Server"
-msgstr "Samba Сървър"
+msgid "Card model:"
+msgstr "Модел на карта:"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "DHCP клиент"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Postfix Mail Server"
-msgstr "Postfix Пощенски сървър"
+msgid "Start Server"
+msgstr "Стартира сървър"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Ftp Server"
-msgstr "Ftp Сървър"
+msgid "Turkmenistan"
+msgstr "Туркменистан"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "Име на домейна"
+msgid "All remote machines"
+msgstr "(на тази машина)"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Apache World Wide Web Server"
-msgstr "Apache World Wide Web Сървър"
+msgid "Install themes"
+msgstr "Инсталиране на теми"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
-"Добре дошли в настройката на Proxy.\n"
-"\n"
-"Тук ще можете да установите вашите HTTP и FTP proxy\n"
-"със или без потребителско име и парола\n"
+" обновявания 2002 MandrakeSoft от Stew Benedict <sbenedict\\@mandrakesoft."
+"com>"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "Mail alert configuration"
-msgstr "Конфигурация за подредба на поща"
+msgid "Espanol"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mail alert"
-msgstr "Подредба на поща"
+msgid "Preparing installation"
+msgstr "Подготвям инсталацията"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "моля изчакайте, правя разбор на файл: %s"
+msgid "Edit selected host/network"
+msgstr "Редактиране на избран хост/мрежа"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Content of the file"
-msgstr "Съдържание на файла"
+msgid "Add User -->"
+msgstr "Добавя потребител -->"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Calendar"
-msgstr "Календар"
+msgid "Nauru"
+msgstr "Науру"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Choose file"
-msgstr "Изберете файл"
+msgid "True Type fonts installation"
+msgstr "Инсталиране на True Type шрифтове"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "but not matching"
-msgstr "но не съвпада"
+msgid "Auto-detect printers connected directly to the local network"
+msgstr "Автоматично открива принтери свързани директно към локалната мрежа"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "matching"
-msgstr "съвпадение"
+msgid "LAN configuration"
+msgstr "Настройка на LAN"
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Settings"
-msgstr "Настройки"
+msgid "hard disk model"
+msgstr "модел на твърд диск"
 
-#: ../../standalone/logdrake:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "Инструмент за преглеждане на вашите лог файлове"
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "Не можете да използвате LVM тип за място на монтиране %s"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "search"
-msgstr "търси"
+msgid "Get Windows Fonts"
+msgstr "Взима шрифтове на Windows"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
-msgstr ""
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Syslog"
-msgstr "Системен журнал"
+msgid "Iranian"
+msgstr "Иранска"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Messages"
-msgstr "Съобщения"
+msgid "Croatia"
+msgstr "Хърватия"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "User"
-msgstr "Потребител"
+msgid "Gateway:"
+msgstr "Gateway:"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/Помощ/_Относно..."
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Add server"
+msgstr "Добави потребител"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Опции/Тест"
+msgid "Remote printer name"
+msgstr "Име на отдалечен принтер"
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "/File/-"
-msgstr "/Файл/-"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/File/Save _As"
-msgstr "/Файл/Запис _като"
+msgid "Device: "
+msgstr "Устройство: "
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Printerdrake"
+msgstr "Printerdrake"
 
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/Файл/_Запис"
+msgid "License agreement"
+msgstr "Лицензионен договор"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "System Options"
+msgstr "Системни опции"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/File/_Open"
-msgstr "/Файл/_Отвори"
+msgid "Please enter the directory where backups are stored"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Please choose the desired security level"
+msgstr "Моля, изберете ниво на сигурност"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "/File/_New"
-msgstr "/Файл/_Нов"
+msgid "This host is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Show only for the selected day"
-msgstr "Показва само за избраният ден"
+msgid ", USB printer"
+msgstr ", USB принтер"
 
-#: ../../standalone/mousedrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Emulate third button?"
-msgstr "Да симулирам ли трети бутон ?"
+msgid "Choose the applications that will support the fonts:"
+msgstr "Изберете приложенията които ще поддържат шрифтовете:"
 
-#: ../../standalone/mousedrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Please choose your mouse type."
-msgstr "Моля, изберете тип на мишката."
+msgid "Configure X"
+msgstr "Настройка на Х"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Connect %s"
-msgstr "Свързва %s"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "Турска (традиционен \"F\" модел)"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Disconnect %s"
-msgstr "Разкачва %s"
+msgid "Congratulations!"
+msgstr "Поздравления !"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "Use owner id for execution"
+msgstr "Използва id на собственик при изпълнение"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "received"
-msgstr "получени"
+msgid "Down"
+msgstr "Долу"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "transmitted"
-msgstr "прехвърлени"
+msgid "Raw printer (No driver)"
+msgstr "'Raw' принтер (Без драйвер)"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "received: "
-msgstr "получено: "
+msgid "Install rpm"
+msgstr "Инсталира rpm"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "sent: "
-msgstr "изпраща: "
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
+msgstr ""
+"За да изпечатате файл от командния ред (терминален прозорец), можете или да "
+"използвате командата \"%s <file>\" или графичния печатащ инструмент: \"xpp "
+"<file>\" или \"kprinter <file>\". Графичните инструменти ви позволяват да "
+"избирате принтера и да поправяте лесно настройките на опциите.\n"
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Local measure"
-msgstr "Локално измерване"
+msgid "Time remaining "
+msgstr "Оставащо време "
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "average"
-msgstr "средно"
+msgid "UK keyboard"
+msgstr "UК клавиатура"
 
-#: ../../standalone/net_monitor:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Color configuration"
-msgstr "Конфигурация на цвят"
+msgid "Unmount"
+msgstr "Демонтирай"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
-msgstr ""
-"Връзката пропадна.\n"
-"Проверете си конфигурацията в Контролен център на Mandrake."
+msgid "Uninstall Fonts"
+msgstr "Инсталира шрифтове"
 
-#: ../../standalone/net_monitor:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Connection complete."
-msgstr "Връзката е установена."
+msgid "Microsoft Explorer"
+msgstr "Microsoft Explorer"
 
-#: ../../standalone/net_monitor:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr "Разкачването от Интернет е завършило"
+msgid "German (no dead keys)"
+msgstr "Немска (без неработещи клавиши)"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Disconnection from the Internet failed."
-msgstr "Разкачването от Интернет е неуспешно"
+msgid "Transferring %s..."
+msgstr "Прехвърляне на %s ..."
 
-#: ../../standalone/net_monitor:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Connecting to the Internet "
-msgstr "Свързвам се към Интернет"
+msgid "32 thousand colors (15 bits)"
+msgstr "32 хиляди цвята (15 бита)"
 
-#: ../../standalone/net_monitor:1
+#: ../../any.pm:1
 #, c-format
-msgid "Disconnecting from the Internet "
-msgstr "Разкачвам от Интернет "
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
+msgstr ""
+"Вие може да експортирате като използвате NFS или Samba. Моля, изберете какво "
+"искате да използвате."
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Wait please, testing your connection..."
-msgstr "Почакайте, пробвам вашата връзка..."
+msgid "Reboot"
+msgstr "Престартира"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Logs"
-msgstr ""
+msgid "Gambia"
+msgstr "Гамбия"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Connection Time: "
-msgstr "Време на връзката: "
+msgid "Mandrake Control Center"
+msgstr "Контролен център на Mandrake"
 
-#: ../../standalone/net_monitor:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Receiving Speed:"
-msgstr "Скорост на получаване:"
+msgid ""
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
+"Вие може да въведете други портове. \n"
+"Валидни са например: 139/tcp 139/udp.\n"
+"Погледнете в /etc/services за информация"
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "Sending Speed:"
-msgstr "Скорост на изпращане:"
+msgid ""
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Statistics"
-msgstr "Статистики"
+msgid "\t-Tape \n"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Profile "
-msgstr "Профил "
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
+msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Network Monitoring"
-msgstr "Мониторинг на мрежата"
+msgid "Remember this password"
+msgstr "Запомня тази парола"
 
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "Локален принтер"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "Споделянето на Интернет в момента е включено."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Name/IP address of host:"
+msgid "\t-Network by SSH.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
+" Ако желаният принтер е открит автоматично, просто изберете го от списъка и "
+"тогава добавете име на потребител, парола, и/или работна група ако е "
+"необходимо."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "Изберете графична карта"
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "Използвай свободното място на Windows дяла"
 
 #: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "Моля, пробвайте мишката си"
+#, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "%s намерено на %s, да конфигурирам автоматично?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "Локален принтер"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "(на тази машина)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "Изтриване на опашката"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "засечена %s"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Add host"
-msgstr "Добави потребител"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree86 driver: %s\n"
+msgstr "XFree86 драйвер: %s\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
+"Този адрес/хост вече е в списъка, той не може да бъде добавен отново.\n"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "Използвай свободното място"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "(на тази машина)"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 msgstr ""
+"\n"
+"                      DrakBackup Рапорт \n"
+"\n"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Choose the packages you want to install"
+msgstr "Изберете пакетите, които искате да инсталирате"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "Поделяне на файлове"
+msgid "Papua New Guinea"
+msgstr "Папуа Нова Гвинея"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Serbian (cyrillic)"
+msgstr "Сръбска (кирилица)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Make kernel message quiet by default"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
 msgstr ""
+"Искате ли да настроите този принтер (\"%s\")\n"
+"като принтер по подразбиране ?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "Локален принтер"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "Локален принтер"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "Поделяне на файлове"
-
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Add a scanner manually"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "Локален принтер"
+msgid "Creating bootdisk..."
+msgstr "Създаване на стартираща дискета..."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
+msgid "Wait please, testing your connection..."
+msgstr "Почакайте, пробвам вашата връзка..."
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "Нямате мрежов адаптер!"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Bringing down the network"
+msgstr "Изключване на мрежата"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid ""
-"The following scanners\n"
-"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "Нямате мрежов адаптер!"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Login ID"
+msgstr "Потребителско име"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS е популярен протокол за обмен на файлове по TCP/IP мрежи.\n"
+"Тази услуга осигурява функционалността на заключването на NFS файловете."
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "choose device"
-msgstr "избира устройство"
+msgid "DHCP Client"
+msgstr "DHCP клиент"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "Локален принтер"
+msgid "dismiss"
+msgstr "остави"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "Използвай автоматично засичане"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "Печатан/Сканиранее на \"%s\""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "omit raid modules"
+msgstr "без raid модули"
 
-#: ../../standalone/scannerdrake:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd е демона за печат необходим на lpr да работи нормално. Той просто е\n"
+"сървър, който определя работите за печат на принтер(а/ите)."
 
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "The %s is unsupported"
-msgstr "%s не се подържа"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "Настройка на Интернет връзка"
 
-#: ../../standalone/scannerdrake:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
-msgstr "%s не се подържа от тази версия на Mandrake Linux."
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Порт"
+msgid "comma separated numbers"
+msgstr "номера разделени със запетая"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ", "
+msgid ""
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "засечена %s"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid " ("
+msgid "Move selected rule up one level"
 msgstr ""
 
 #: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "Изберете графична карта"
+msgid ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "Нямате мрежов адаптер!"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr "%s не е в базата данни на скенера, да конфигурирам ръчно?"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "Наистина ли искате да премахнете принтера \"%s\" ?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "%s намерено на %s, да конфигурирам автоматично?"
+msgid "I can't find any room for installing"
+msgstr "Не мога да намеря никакво място за инсталация"
 
-#: ../../standalone/service_harddrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Hardware probing in progress"
-msgstr "Прогрес на хардуерна проба"
+msgid "Default printer"
+msgstr "Принтер по подразбиране"
 
-#: ../../standalone/service_harddrake:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Some devices were added:\n"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
+"Настроили сте няколко начина за връзка към Интернет.\n"
+"Изберете този, който искате да използвате.\n"
+"\n"
 
-#: ../../standalone/service_harddrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Modify RAID"
+msgstr "Модифицирай RAID"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
 msgstr ""
+"Открита е ISDN PCI карта, но с непознат тип. Моля изберете някоя PCI карта "
+"от следващият екран."
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../any.pm:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr "Добре дошли в света на Отвореният Изходен код"
+msgid "Add user"
+msgstr "Добави потребител"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr "Благодарим ви, че избрахте Mandrake Linux 9.1"
+msgid "RAID-disks %s\n"
+msgstr "RAID-дискове %s\n"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "Liberia"
+msgstr "Либерия"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
-"Какво искате да знаете повече за общността на Отвореният изходен код? Влезте "
-"в света на Свободният Софтуер"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "Избор на клавиатура"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
-msgstr ""
-"Mandrake Linux 9.1 ви ппозволява да получите най-последните версии на "
-"софтуера, да слушате музикални файлове, да обработвате фото и графични "
-"файлове, както и да гледате видео."
+msgid "Format partitions"
+msgstr "Форматиране на дялове"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
-msgstr ""
+msgid "Automatic correction of CUPS configuration"
+msgstr "Автоматична корекция на CUPS конфигурация"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
-msgstr ""
+msgid "Running \"%s\" ..."
+msgstr "Изпълнява \"%s\" ..."
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+msgid "enable radio support"
+msgstr "разрешава подръжка на радио"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "Конфигурация на Терминален Сървър в Mandrake "
+msgid "Scanner sharing to hosts: "
+msgstr "Поделяне на файлове"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Loopback file name: %s"
+msgstr "Име на loopback файла: %s"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
-msgstr ""
-"Mandrake Linux 9.1 ви предоставя 11 потребителски интерфейса които могат да "
-"бъдат напълно модифицирани: KDE 3, Gnome 2, WindowMaker, ..."
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "Моля, изберете сериен порт към който свързан модемът ви."
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Do not transfer printers"
+msgstr "Не прехвърляй принтери"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "Забавяне преди стартирането на подразбиращият образ"
+
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "Моля, цъкнете на носителя"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr "Mandrake Linux 9.1 е непрекъснато разработваща се платформа"
+msgid "user"
+msgstr "Потребител"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Hard Disk to backup"
+msgstr "Използва твърд диск за резервно копие"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
+#, c-format
+msgid "Configure"
+msgstr "Настрока"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "Изберете графична карта"
+
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
-"Превръща вашата машина в мощен Linux сървър с няколко цъквания на мишката: "
-"Web сървър, поща, firewall, router, файлов и принт сървър, ..."
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr "Превърнете вашата машина в надежден сървър"
+msgid "Backup Users"
+msgstr "Резервно копие на потребители"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
-"Нашите пълни решения, както и специални предложения на продукти и други "
-"\"лакомства\" са достъпни в нашият 'e-източник':"
+"Моля, въведете host name за машината.\n"
+"Host името трябва да буде напълно квалифицирано име,\n"
+"като ``mybox.mylab.myco.com''.\n"
+"Можете също да въведете IP адреса на Вашия gateway, ако имате такъв"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The official MandrakeSoft Store"
-msgstr "Официалният източник на MandrakeSoft "
+msgid "Select Printer Spooler"
+msgstr "Изберете принтерен spooler"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
+msgid "Create new theme"
+msgstr "Създава нова тема"
+
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Mandrake Tools Explanation"
 msgstr ""
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "Локален принтер"
+
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"Някои важни пакети не се инсталираха както трябва.\n"
+"Или CDROM устройството ви или компакт диска ви е дефектен.\n"
+"Проверете компакт диска на инсталирания компютър използвайки \"rpm -qpl "
+"Mandrake/RPMS/*.rpm\"\n"
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "засечена %s"
+
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr "Оптимизира вашата сигурност"
+msgid "if set to yes, run the daily security checks."
+msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
-msgstr "Този продукт е достъпен от web сайта на MandrakeStore"
+msgid "Azerbaijan"
+msgstr "Азербайджан"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Дворак (US)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
+"това е физическата шина на който е закачено устроството (напр: PCI, USB, ...)"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
-msgstr "намерете решения на вашите проблеми с подръжката на MandrakeSoft"
+msgid "How is the printer connected?"
+msgstr "Как е свързан принтерът ?"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Become a MandrakeExpert"
-msgstr "Станете MandrakeExpert"
+msgid "Security level"
+msgstr "Ниво на сигурност"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
-#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
-msgstr ""
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "Разделителна способност"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
-msgstr ""
+msgid "Services"
+msgstr "Услуги"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "MandrakeExpert обединява"
+msgid "4 MB"
+msgstr "4 МБ"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -18067,10 +18141,6 @@ msgstr ""
 "преглед на PDF, и т.н."
 
 #: ../../share/compssUsers:999
-msgid "Workstation"
-msgstr "Работна станция"
-
-#: ../../share/compssUsers:999
 msgid "Game station"
 msgstr "Игрална станция"
 
@@ -18143,10 +18213,6 @@ msgstr ""
 "инструменти"
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "Графична среда"
-
-#: ../../share/compssUsers:999
 msgid "Gnome Workstation"
 msgstr "Gnome работна станция"
 
@@ -18166,10 +18232,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr "Icewm, Window Maker, Enlightenment, Fvwm и т.н."
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "Разработка"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr "Библиотеки за разработка на C и C++, програми и include файлове"
 
@@ -18241,40 +18303,94 @@ msgstr "NFS сървър, SMB сървър, Proxy сървър, SSH сървър"
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Мутимедийна станция"
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr ""
+"Набор от инструменти за четене и изпращане на поща и новини (pine, mutt, "
+"tin..) и за обикаляне из Мрежата"
+
+#~ msgid "Internet connection & configuration"
+#~ msgstr "Интернет връзка и настройка"
+
+#~ msgid "Configure the connection"
+#~ msgstr "Конфигуриране на връзката"
+
+#~ msgid "Disconnect"
+#~ msgstr "Отвържи"
+
+#~ msgid "Connect"
+#~ msgstr "Свържи"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Можете да пренастроите връзката."
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Можете да се свържете към Интернет или да пренастроите връзката."
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "В момента не сте свързани към Интернет"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "Можете да се отвържете или да пренастроите връзката."
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "В момента сте свързани към Интернет"
+
+#~ msgid "files sending by FTP"
+#~ msgstr "файлове изпратени по FTP"
+
+#~ msgid "Relaunch 'lilo'"
+#~ msgstr "Престартира 'lilo'"
+
+#~ msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+#~ msgstr "Прави initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
+
+#~ msgid "Write %s"
+#~ msgstr "Пише %s"
+
+#~ msgid "Copy %s to %s"
+#~ msgstr "Копира %s в %s"
+
+#~ msgid "Backup %s to %s.old"
+#~ msgstr "Резервно копие %s в  %s.old"
+
+#~ msgid "Author:"
+#~ msgstr "Автор:"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Sound playing/editing programs"
-msgstr "Програми за пускане/поправяне на звук и видео"
+#~ msgid "Audio station"
+#~ msgstr "Мутимедийна станция"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Игрална станция"
+#~ msgid "Sound playing/editing programs"
+#~ msgstr "Програми за пускане/поправяне на звук и видео"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video playing programs"
-msgstr "Програми за пускане/поправяне на звук и видео"
+#~ msgid "Video station"
+#~ msgstr "Игрална станция"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Игрална станция"
+#~ msgid "Video playing programs"
+#~ msgstr "Програми за пускане/поправяне на звук и видео"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "Графични програми като The Gimp"
+#~ msgid "Graphic station"
+#~ msgstr "Игрална станция"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr ""
-"Набор от инструменти за четене и изпращане на поща и новини (pine, mutt, "
-"tin..) и за обикаляне из Мрежата"
+#~ msgid "Graphics programs"
+#~ msgstr "Графични програми като The Gimp"
 
 #~ msgid "Printer sharing"
 #~ msgstr "Поделяне на принтер"
@@ -18731,7 +18847,7 @@ msgstr ""
 #~ "\n"
 #~ "Please choose your preferred language for installation and system usage.\n"
 #~ "\n"
-#~ "Clicking on the \"Advanced\" button will allow you to select other\n"
+#~ "Clicking on the \"%s\" button will allow you to select other\n"
 #~ "languages to be installed on your workstation. Selecting other languages\n"
 #~ "will install the language-specific files for system documentation and\n"
 #~ "applications. For example, if you host users from Spain on your machine,\n"
@@ -19133,8 +19249,7 @@ msgstr ""
 #~ "Click on \"Cancel\" if you want to choose another partition for your new\n"
 #~ "Mandrake Linux operating system installation.\n"
 #~ "\n"
-#~ "Click on \"Advanced\" if you wish to select partitions that will be "
-#~ "checked\n"
+#~ "Click on \"%s\" if you wish to select partitions that will be checked\n"
 #~ "for bad blocks on the disk."
 #~ msgstr ""
 #~ "Всички новодефинирани дялове трябва да бъдат форматирани, за да се "
@@ -19175,7 +19290,7 @@ msgstr ""
 #~ "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n"
 #~ "soon as the computer has booted up again.\n"
 #~ "\n"
-#~ "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n"
+#~ "The \"%s\" button (in Expert mode only) shows two more buttons to:\n"
 #~ "\n"
 #~ " * \"generate auto-install floppy\": to create an installation floppy "
 #~ "disk\n"
@@ -19962,8 +20077,7 @@ msgstr ""
 #~ "are\n"
 #~ "finish adding all the users you want, select \"Done\".\n"
 #~ "\n"
-#~ "Clicking the \"Advanced\" button allows you to change the default \"shell"
-#~ "\"\n"
+#~ "Clicking the \"%s\" button allows you to change the default \"shell\"\n"
 #~ "for that user (bash by default).\n"
 #~ "\n"
 #~ "When you are finished adding all users, you will be proposed to choose a\n"
@@ -20018,9 +20132,6 @@ msgstr ""
 #~ "подразбиране на\n"
 #~ "потребителя (bash по подразбиране)."
 
-#~ msgid "Upgrade"
-#~ msgstr "Обновяване"
-
 #~ msgid "Palestina"
 #~ msgstr "Палестина"
 
diff --git a/perl-install/share/po/bs.po b/perl-install/share/po/bs.po
index 75641c37f..1ebb62863 100644
--- a/perl-install/share/po/bs.po
+++ b/perl-install/share/po/bs.po