summaryrefslogtreecommitdiffstats
path: root/perl-install/standalone/drakpxe
Commit message (Expand)AuthorAgeFilesLines
* bump copyrigth noticeThierry Vignaud2005-04-251-1/+1
* switch from MandrakeSoft to Mandriva in copyright noticesThierry Vignaud2005-04-211-1/+1
* - remove non useful non-ascii charactersPascal Rigaux2005-04-051-1/+1
* protocol names, trademark and acronyms should be upcaseThierry Vignaud2004-08-231-2/+2
* adapt to new directories layout:Pascal Rigaux2004-07-261-3/+3
* perl_checker compliancePascal Rigaux2004-07-211-1/+1
* MandrakeSoft -> MandrakesoftPascal Rigaux2004-07-201-1/+1
* do not abuse global namespaceThierry Vignaud2004-02-161-2/+2
* new banner iconsThierry Vignaud2004-02-131-1/+1
* update copyright noticesThierry Vignaud2004-01-221-1/+1
* fix bogus use of old netwok module instead of network::networkThierry Vignaud2003-11-121-2/+2
* misc perl_checker cleanupsThierry Vignaud2003-10-201-2/+2
* network::netconnect is unusedThierry Vignaud2003-10-171-1/+0
* "xxx or xxx" in list context is always bad!Pascal Rigaux2003-08-191-2/+2
* fixed to match new pxe dhcp.conf configuration file.Francois Pons2003-08-131-2/+2
* perl_checker fixesThierry Vignaud2003-05-231-3/+3
* fixed bad English stringPablo Saratxaga2003-02-281-1/+1
* reflect in standalone drakxtools the removal of DrakX iconsGuillaume Cottenceau2003-02-281-1/+1
* added code to handle more smootly if apache or apache-mod_perl is installed, orFrancois Pons2003-02-261-1/+1
* switched to apache2 instead of apache (avoid problem with apache-mod_perl).Francois Pons2003-02-261-1/+1
* fix translation of title by calling N() after interactive->vnewGuillaume Cottenceau2003-02-171-1/+1
* fix just stupid fpons sucksThierry Vignaud2003-02-121-1/+1
* updated to find an interface even when no profile are available.Francois Pons2003-02-121-6/+10
* fixed perl_checkerFrancois Pons2003-01-291-14/+16
* perl_checker fixThierry Vignaud2003-01-231-2/+2
* latest fixes for having default file correctly documented and make sure ifFrancois Pons2003-01-211-19/+22
* add daemons stop/start code.Francois Pons2003-01-211-0/+3
* update with something that look like running.Francois Pons2003-01-211-381/+289
* initial revision with translation message.Francois Pons2003-01-201-0/+596
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-10 15:42:43 +0000
ref='#n358'>358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 2099 2100 2101 2102 2103 2104 2105 2106 2107 2108 2109 2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126 2127 2128 2129 2130 2131 2132 2133 2134 2135 2136 2137 2138 2139 2140 2141 2142 2143 2144 2145 2146 2147 2148 2149 2150 2151 2152 2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173 2174 2175 2176 2177 2178 2179 2180 2181 2182 2183 2184 2185 2186 2187 2188 2189 2190 2191 2192 2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203 2204 2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215 2216 2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229 2230 2231 2232 2233 2234 2235 2236 2237 2238 2239 2240 2241 2242 2243 2244 2245 2246 2247 2248 2249 2250 2251 2252 2253 2254 2255 2256 2257 2258 2259 2260 2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271 2272 2273 2274 2275 2276 2277 2278 2279 2280 2281 2282 2283 2284 2285 2286 2287 2288 2289 2290 2291 2292 2293 2294 2295 2296 2297 2298 2299 2300 2301 2302 2303 2304 2305 2306 2307 2308 2309 2310 2311 2312 2313 2314 2315 2316 2317 2318 2319 2320 2321 2322 2323 2324 2325 2326 2327 2328 2329 2330 2331 2332 2333 2334 2335 2336 2337 2338 2339 2340 2341 2342 2343 2344 2345 2346 2347 2348 2349 2350 2351 2352 2353 2354 2355 2356 2357 2358 2359 2360 2361 2362 2363 2364 2365 2366 2367 2368 2369 2370 2371 2372 2373 2374 2375 2376 2377 2378 2379 2380 2381 2382 2383 2384 2385 2386 2387 2388 2389 2390 2391 2392 2393 2394 2395 2396 2397 2398 2399 2400 2401 2402 2403 2404 2405 2406 2407 2408 2409 2410 2411 2412 2413 2414 2415 2416 2417 2418 2419 2420 2421 2422 2423 2424 2425 2426 2427 2428 2429 2430 2431 2432 2433 2434 2435 2436 2437 2438 2439 2440 2441 2442 2443 2444 2445 2446 2447 2448 2449 2450 2451 2452 2453 2454 2455 2456 2457 2458 2459 2460 2461 2462 2463 2464 2465 2466 2467 2468 2469 2470 2471 2472 2473 2474 2475 2476 2477 2478 2479 2480 2481 2482 2483 2484 2485 2486 2487 2488 2489 2490 2491 2492 2493 2494 2495 2496 2497 2498 2499 2500 2501 2502 2503 2504 2505 2506 2507 2508 2509 2510 2511 2512 2513 2514 2515 2516 2517 2518 2519 2520 2521 2522 2523 2524 2525 2526 2527 2528 2529 2530 2531 2532 2533 2534 2535 2536 2537 2538 2539 2540 2541 2542 2543 2544 2545 2546 2547 2548 2549 2550 2551 2552 2553 2554 2555 2556 2557 2558 2559 2560 2561 2562 2563 2564 2565 2566 2567 2568 2569 2570 2571 2572 2573 2574 2575 2576 2577 2578 2579 2580 2581 2582 2583 2584 2585 2586 2587 2588 2589 2590 2591 2592 2593 2594 2595 2596 2597 2598 2599 2600 2601 2602 2603 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2614 2615 2616 2617 2618 2619 2620 2621 2622 2623 2624 2625 2626 2627 2628 2629 2630 2631 2632 2633 2634 2635 2636 2637 2638 2639 2640 2641 2642 2643 2644 2645 2646 2647 2648 2649 2650 2651 2652 2653 2654 2655 2656 2657 2658 2659 2660 2661 2662 2663 2664 2665 2666 2667 2668 2669 2670 2671 2672 2673 2674 2675 2676 2677 2678 2679 2680 2681 2682 2683 2684 2685 2686 2687 2688 2689 2690 2691 2692 2693 2694 2695 2696 2697 2698 2699 2700 2701 2702 2703 2704 2705 2706 2707 2708 2709 2710 2711 2712 2713 2714 2715 2716 2717 2718 2719 2720 2721 2722 2723 2724 2725 2726 2727 2728 2729 2730 2731 2732 2733 2734 2735 2736 2737 2738 2739 2740 2741 2742 2743 2744 2745 2746 2747 2748 2749 2750 2751 2752 2753 2754 2755 2756 2757 2758 2759 2760 2761 2762 2763 2764 2765 2766 2767 2768 2769 2770 2771 2772 2773 2774 2775 2776 2777 2778 2779 2780 2781 2782 2783 2784 2785 2786 2787 2788 2789 2790 2791 2792 2793 2794 2795 2796 2797 2798 2799 2800 2801 2802 2803 2804 2805 2806 2807 2808 2809 2810 2811 2812 2813 2814 2815 2816 2817 2818 2819 2820 2821 2822 2823 2824 2825 2826 2827 2828 2829 2830 2831 2832 2833 2834 2835 2836 2837 2838 2839 2840 2841 2842 2843 2844 2845 2846 2847 2848 2849 2850 2851 2852 2853 2854 2855 2856 2857 2858 2859 2860 2861 2862 2863 2864 2865 2866 2867 2868 2869 2870 2871 2872 2873 2874 2875 2876 2877 2878 2879 2880 2881 2882 2883 2884 2885 2886 2887 2888 2889 2890 2891 2892 2893 2894 2895 2896 2897 2898 2899 2900 2901 2902 2903 2904 2905 2906 2907 2908 2909 2910 2911 2912 2913 2914 2915 2916 2917 2918 2919 2920 2921 2922 2923 2924 2925 2926 2927 2928 2929 2930 2931 2932 2933 2934 2935 2936 2937 2938 2939 2940 2941 2942 2943 2944 2945 2946 2947 2948 2949 2950 2951 2952 2953 2954 2955 2956 2957 2958 2959 2960 2961 2962 2963 2964 2965 2966 2967 2968 2969 2970 2971 2972 2973 2974 2975 2976 2977 2978 2979 2980 2981 2982 2983 2984 2985 2986 2987 2988 2989 2990 2991 2992 2993 2994 2995 2996 2997 2998 2999 3000 3001 3002 3003 3004 3005 3006 3007 3008 3009 3010 3011 3012 3013 3014 3015 3016 3017 3018 3019 3020 3021 3022 3023 3024 3025 3026 3027 3028 3029 3030 3031 3032 3033 3034 3035 3036 3037 3038 3039 3040 3041 3042 3043 3044 3045 3046 3047 3048 3049 3050 3051 3052 3053 3054 3055 3056 3057 3058 3059 3060 3061 3062 3063 3064 3065 3066 3067 3068 3069 3070 3071 3072 3073 3074 3075 3076 3077 3078 3079 3080 3081 3082 3083 3084 3085 3086 3087 3088 3089 3090 3091 3092 3093 3094 3095 3096 3097 3098 3099 3100 3101 3102 3103 3104 3105 3106 3107 3108 3109 3110 3111 3112 3113 3114 3115 3116 3117 3118 3119 3120 3121 3122 3123 3124 3125 3126 3127 3128 3129 3130 3131 3132 3133 3134 3135 3136 3137 3138 3139 3140 3141 3142 3143 3144 3145 3146 3147 3148 3149 3150 3151 3152 3153 3154 3155 3156 3157 3158 3159 3160 3161 3162 3163 3164 3165 3166 3167 3168 3169 3170 3171 3172 3173 3174 3175 3176 3177 3178 3179 3180 3181 3182 3183 3184 3185 3186 3187 3188 3189 3190 3191 3192 3193 3194 3195 3196 3197 3198 3199 3200 3201 3202 3203 3204 3205 3206 3207 3208 3209 3210 3211 3212 3213 3214 3215 3216 3217 3218 3219 3220 3221 3222 3223 3224 3225 3226 3227 3228 3229 3230 3231 3232 3233 3234 3235 3236 3237 3238 3239 3240 3241 3242 3243 3244 3245 3246 3247 3248 3249 3250 3251 3252 3253 3254 3255 3256 3257 3258 3259 3260 3261 3262 3263 3264 3265 3266 3267 3268 3269 3270 3271 3272 3273 3274 3275 3276 3277 3278 3279 3280 3281 3282 3283 3284 3285 3286 3287 3288 3289 3290 3291 3292 3293 3294 3295 3296 3297 3298 3299 3300 3301 3302 3303 3304 3305 3306 3307 3308 3309 3310 3311 3312 3313 3314 3315 3316 3317 3318 3319 3320 3321 3322 3323 3324 3325 3326 3327 3328 3329 3330 3331 3332 3333 3334 3335 3336 3337 3338 3339 3340 3341 3342 3343 3344 3345 3346 3347 3348 3349 3350 3351 3352 3353 3354 3355 3356 3357 3358 3359 3360 3361 3362 3363 3364 3365 3366 3367 3368 3369 3370 3371 3372 3373 3374 3375 3376 3377 3378 3379 3380 3381 3382 3383 3384 3385 3386 3387 3388 3389 3390 3391 3392 3393 3394 3395 3396 3397 3398 3399 3400 3401 3402 3403 3404 3405 3406 3407 3408 3409 3410 3411 3412 3413 3414 3415 3416 3417 3418 3419 3420 3421 3422 3423 3424 3425 3426 3427 3428 3429 3430 3431 3432 3433 3434 3435 3436 3437 3438 3439 3440 3441 3442 3443 3444 3445 3446 3447 3448 3449 3450 3451 3452 3453 3454 3455 3456 3457 3458 3459 3460 3461 3462 3463 3464 3465 3466 3467 3468 3469 3470 3471 3472 3473 3474 3475 3476 3477 3478 3479 3480 3481 3482 3483 3484 3485 3486 3487 3488 3489 3490 3491 3492 3493 3494 3495 3496 3497 3498 3499 3500 3501 3502 3503 3504 3505 3506 3507 3508 3509 3510 3511 3512 3513 3514 3515 3516 3517 3518 3519 3520 3521 3522 3523 3524 3525 3526 3527 3528 3529 3530 3531 3532 3533 3534 3535 3536 3537 3538 3539 3540 3541 3542 3543 3544 3545 3546 3547 3548 3549 3550 3551 3552 3553 3554 3555 3556 3557 3558 3559 3560 3561 3562 3563 3564 3565 3566 3567 3568 3569 3570 3571 3572 3573 3574 3575 3576 3577 3578 3579 3580 3581 3582 3583 3584 3585 3586 3587 3588 3589 3590 3591 3592 3593 3594 3595 3596 3597 3598 3599 3600 3601 3602 3603 3604 3605 3606 3607 3608 3609 3610 3611 3612 3613 3614 3615 3616 3617 3618 3619 3620 3621 3622 3623 3624 3625 3626 3627 3628 3629 3630 3631 3632 3633 3634 3635 3636 3637 3638 3639 3640 3641 3642 3643 3644 3645 3646 3647 3648 3649 3650 3651 3652 3653 3654 3655 3656 3657 3658 3659 3660 3661 3662 3663 3664 3665 3666 3667 3668 3669 3670 3671 3672 3673 3674 3675 3676 3677 3678 3679 3680 3681 3682 3683 3684 3685 3686 3687 3688 3689 3690 3691 3692 3693 3694 3695 3696 3697 3698 3699 3700 3701 3702 3703 3704 3705 3706 3707 3708 3709 3710 3711 3712 3713 3714 3715 3716 3717 3718 3719 3720 3721 3722 3723 3724 3725 3726 3727 3728 3729 3730 3731 3732 3733 3734 3735 3736 3737 3738 3739 3740 3741 3742 3743 3744 3745 3746 3747 3748 3749 3750 3751 3752 3753 3754 3755 3756 3757 3758 3759 3760 3761 3762 3763 3764 3765 3766 3767 3768 3769 3770 3771 3772 3773 3774 3775 3776 3777 3778 3779 3780 3781 3782 3783 3784 3785 3786 3787 3788 3789 3790 3791 3792 3793 3794 3795 3796 3797 3798 3799 3800 3801 3802 3803 3804 3805 3806 3807 3808 3809 3810 3811 3812 3813 3814 3815 3816 3817 3818 3819 3820 3821 3822 3823 3824 3825 3826 3827 3828 3829 3830 3831 3832 3833 3834 3835 3836 3837 3838 3839 3840 3841 3842 3843 3844 3845 3846 3847 3848 3849 3850 3851 3852 3853 3854 3855 3856 3857 3858 3859 3860 3861 3862 3863 3864 3865 3866 3867 3868 3869 3870 3871 3872 3873 3874 3875 3876 3877 3878 3879 3880 3881 3882 3883 3884 3885 3886 3887 3888 3889 3890 3891 3892 3893 3894 3895 3896 3897 3898 3899 3900 3901 3902 3903 3904 3905 3906 3907 3908 3909 3910 3911 3912 3913 3914 3915 3916 3917 3918 3919 3920 3921 3922 3923 3924 3925 3926 3927 3928 3929 3930 3931 3932 3933 3934 3935 3936 3937 3938 3939 3940 3941 3942 3943 3944 3945 3946 3947 3948 3949 3950 3951 3952 3953 3954 3955 3956 3957 3958 3959 3960 3961 3962 3963 3964 3965 3966 3967 3968 3969 3970 3971 3972 3973 3974 3975 3976 3977 3978 3979 3980 3981 3982 3983 3984 3985 3986 3987 3988 3989 3990 3991 3992 3993 3994 3995 3996 3997 3998 3999 4000 4001 4002 4003 4004 4005 4006 4007 4008 4009 4010 4011 4012 4013 4014 4015 4016 4017 4018 4019 4020 4021 4022 4023 4024 4025 4026 4027 4028 4029 4030 4031 4032 4033 4034 4035 4036 4037 4038 4039 4040 4041 4042 4043 4044 4045 4046 4047 4048 4049 4050 4051 4052 4053 4054 4055 4056 4057 4058 4059 4060 4061 4062 4063 4064 4065 4066 4067 4068 4069 4070 4071 4072 4073 4074 4075 4076 4077 4078 4079 4080 4081 4082 4083 4084 4085 4086 4087 4088 4089 4090 4091 4092 4093 4094 4095 4096 4097 4098 4099 4100 4101 4102 4103 4104 4105 4106 4107 4108 4109 4110 4111 4112 4113 4114 4115 4116 4117 4118 4119 4120 4121 4122 4123 4124 4125 4126 4127 4128 4129 4130 4131 4132 4133 4134 4135 4136 4137 4138 4139 4140 4141 4142 4143 4144 4145 4146 4147 4148 4149 4150 4151 4152 4153 4154 4155 4156 4157 4158 4159 4160 4161 4162 4163 4164 4165 4166 4167 4168 4169 4170 4171 4172 4173 4174 4175 4176 4177 4178 4179 4180 4181 4182 4183 4184 4185 4186 4187 4188 4189 4190 4191 4192 4193 4194 4195 4196 4197 4198 4199 4200 4201 4202 4203 4204 4205 4206 4207 4208 4209 4210 4211 4212 4213 4214 4215 4216 4217 4218 4219 4220 4221 4222 4223 4224 4225 4226 4227 4228 4229 4230 4231 4232 4233 4234 4235 4236 4237 4238 4239 4240 4241 4242 4243 4244 4245 4246 4247 4248 4249 4250 4251 4252 4253 4254 4255 4256 4257 4258 4259 4260 4261 4262 4263 4264 4265 4266 4267 4268 4269 4270 4271 4272 4273 4274 4275 4276 4277 4278 4279 4280 4281 4282 4283 4284 4285 4286 4287 4288 4289 4290 4291 4292 4293 4294 4295 4296 4297 4298 4299 4300 4301 4302 4303 4304 4305 4306 4307 4308 4309 4310 4311 4312 4313 4314 4315 4316 4317 4318 4319 4320 4321 4322 4323 4324 4325 4326 4327 4328 4329 4330 4331 4332 4333 4334 4335 4336 4337 4338 4339 4340 4341 4342 4343 4344 4345 4346 4347 4348 4349 4350 4351 4352 4353 4354 4355 4356 4357 4358 4359 4360 4361 4362 4363 4364 4365 4366 4367 4368 4369 4370 4371 4372 4373 4374 4375 4376 4377 4378 4379 4380 4381 4382 4383 4384 4385 4386 4387 4388 4389 4390 4391 4392 4393 4394 4395 4396 4397 4398 4399 4400 4401 4402 4403 4404 4405 4406 4407 4408 4409 4410 4411 4412 4413 4414 4415 4416 4417 4418 4419 4420 4421 4422 4423 4424 4425 4426 4427 4428 4429 4430 4431 4432 4433 4434 4435 4436 4437 4438 4439 4440 4441 4442 4443 4444 4445 4446 4447 4448 4449 4450 4451 4452 4453 4454 4455 4456 4457 4458 4459 4460 4461 4462 4463 4464 4465 4466 4467 4468 4469 4470 4471 4472 4473 4474 4475 4476 4477 4478 4479 4480 4481 4482 4483 4484 4485 4486 4487 4488 4489 4490 4491 4492 4493 4494 4495 4496 4497 4498 4499 4500 4501 4502 4503 4504 4505 4506 4507 4508 4509 4510 4511 4512 4513 4514 4515 4516 4517 4518 4519 4520 4521 4522 4523 4524 4525 4526 4527 4528 4529 4530 4531 4532 4533 4534 4535 4536 4537 4538 4539 4540 4541 4542 4543 4544 4545 4546 4547 4548 4549 4550 4551 4552 4553 4554 4555 4556 4557 4558 4559 4560 4561 4562 4563 4564 4565 4566 4567 4568 4569 4570 4571 4572 4573 4574 4575 4576 4577 4578 4579 4580 4581 4582 4583 4584 4585 4586 4587 4588 4589 4590 4591 4592 4593 4594 4595 4596 4597 4598 4599 4600 4601 4602 4603 4604 4605 4606 4607 4608 4609 4610 4611 4612 4613 4614 4615 4616 4617 4618 4619 4620 4621 4622 4623 4624 4625 4626 4627 4628 4629 4630 4631 4632 4633 4634 4635 4636 4637 4638 4639 4640 4641 4642 4643 4644 4645 4646 4647 4648 4649 4650 4651 4652 4653 4654 4655 4656 4657 4658 4659 4660 4661 4662 4663 4664 4665 4666 4667 4668 4669 4670 4671 4672 4673 4674 4675 4676 4677 4678 4679 4680 4681 4682 4683 4684 4685 4686 4687 4688 4689 4690 4691 4692 4693 4694 4695 4696 4697 4698 4699 4700 4701 4702 4703 4704 4705 4706 4707 4708 4709 4710 4711 4712 4713 4714 4715 4716 4717 4718 4719 4720 4721 4722 4723 4724 4725 4726 4727 4728 4729 4730 4731 4732 4733 4734 4735 4736 4737 4738 4739 4740 4741 4742 4743 4744 4745 4746 4747 4748 4749 4750 4751 4752 4753 4754 4755 4756 4757 4758 4759 4760 4761 4762 4763 4764 4765 4766 4767 4768 4769 4770 4771 4772 4773 4774 4775 4776 4777 4778 4779 4780 4781 4782 4783 4784 4785 4786 4787 4788 4789 4790 4791 4792 4793 4794 4795 4796 4797 4798 4799 4800 4801 4802 4803 4804 4805 4806 4807 4808 4809 4810 4811 4812 4813 4814 4815 4816 4817 4818 4819 4820 4821 4822 4823 4824 4825 4826 4827 4828 4829 4830 4831 4832 4833 4834 4835 4836 4837 4838 4839 4840 4841 4842 4843 4844 4845 4846 4847 4848 4849 4850 4851 4852 4853 4854 4855 4856 4857 4858 4859 4860 4861 4862 4863 4864 4865 4866 4867 4868 4869 4870 4871 4872 4873 4874 4875 4876 4877 4878 4879 4880 4881 4882 4883 4884 4885 4886 4887 4888 4889 4890 4891 4892 4893 4894 4895 4896 4897 4898 4899 4900 4901 4902 4903 4904 4905 4906 4907 4908 4909 4910 4911 4912 4913 4914 4915 4916 4917 4918 4919 4920 4921 4922 4923 4924 4925 4926 4927 4928 4929 4930 4931 4932 4933 4934 4935 4936 4937 4938 4939 4940 4941 4942 4943 4944 4945 4946 4947 4948 4949 4950 4951 4952 4953 4954 4955 4956 4957 4958 4959 4960 4961 4962 4963 4964 4965 4966 4967 4968 4969 4970 4971 4972 4973 4974 4975 4976 4977 4978 4979 4980 4981 4982 4983 4984 4985 4986 4987 4988 4989 4990 4991 4992 4993 4994 4995 4996 4997 4998 4999 5000 5001 5002 5003 5004 5005 5006 5007 5008 5009 5010 5011 5012 5013 5014 5015 5016 5017 5018 5019 5020 5021 5022 5023 5024 5025 5026 5027 5028 5029 5030 5031 5032 5033 5034 5035 5036 5037 5038 5039 5040 5041 5042 5043 5044 5045 5046 5047 5048 5049 5050 5051 5052 5053 5054 5055 5056 5057 5058 5059 5060 5061 5062 5063 5064 5065 5066 5067 5068 5069 5070 5071 5072 5073 5074 5075 5076 5077 5078 5079 5080 5081 5082 5083 5084 5085 5086 5087 5088 5089 5090 5091 5092 5093 5094 5095 5096 5097 5098 5099 5100 5101 5102 5103 5104 5105 5106 5107 5108 5109 5110 5111 5112 5113 5114 5115 5116 5117 5118 5119 5120 5121 5122 5123 5124 5125 5126 5127 5128 5129 5130 5131 5132 5133 5134 5135 5136 5137 5138 5139 5140 5141 5142 5143 5144 5145 5146 5147 5148 5149 5150 5151 5152 5153 5154 5155 5156 5157 5158 5159 5160 5161 5162 5163 5164 5165 5166 5167 5168 5169 5170 5171 5172 5173 5174 5175 5176 5177 5178 5179 5180 5181 5182 5183 5184 5185 5186 5187 5188 5189 5190 5191 5192 5193 5194 5195 5196 5197 5198 5199 5200 5201 5202 5203 5204 5205 5206 5207 5208 5209 5210 5211 5212 5213 5214 5215 5216 5217 5218 5219 5220 5221 5222 5223 5224 5225 5226 5227 5228 5229 5230 5231 5232 5233 5234 5235 5236 5237 5238 5239 5240 5241 5242 5243 5244 5245 5246 5247 5248 5249 5250 5251 5252 5253 5254 5255 5256 5257 5258 5259 5260 5261 5262 5263 5264 5265 5266 5267 5268 5269 5270 5271 5272 5273 5274 5275 5276 5277 5278 5279 5280 5281 5282 5283 5284 5285 5286 5287 5288 5289 5290 5291 5292 5293 5294 5295 5296 5297 5298 5299 5300 5301 5302 5303 5304 5305 5306 5307 5308 5309 5310 5311 5312 5313 5314 5315 5316 5317 5318 5319 5320 5321 5322 5323 5324 5325 5326 5327 5328 5329 5330 5331 5332 5333 5334 5335 5336 5337 5338 5339 5340 5341 5342 5343 5344 5345 5346 5347 5348 5349 5350 5351 5352 5353 5354 5355 5356 5357 5358 5359 5360 5361 5362 5363 5364 5365 5366 5367 5368 5369 5370 5371 5372 5373 5374 5375 5376 5377 5378 5379 5380 5381 5382 5383 5384 5385 5386 5387 5388 5389 5390 5391 5392 5393 5394 5395 5396 5397 5398 5399 5400 5401 5402 5403 5404 5405 5406 5407 5408 5409 5410 5411 5412 5413 5414 5415 5416 5417 5418 5419 5420 5421 5422 5423 5424 5425 5426 5427 5428 5429 5430 5431 5432 5433 5434 5435 5436 5437 5438 5439 5440 5441 5442 5443 5444 5445 5446 5447 5448 5449 5450 5451 5452 5453 5454 5455 5456 5457 5458 5459 5460 5461 5462 5463 5464 5465 5466 5467 5468 5469 5470 5471 5472 5473 5474 5475 5476 5477 5478 5479 5480 5481 5482 5483 5484 5485 5486 5487 5488 5489 5490 5491 5492 5493 5494 5495 5496 5497 5498 5499 5500 5501 5502 5503 5504 5505 5506 5507 5508 5509 5510 5511 5512 5513 5514 5515 5516 5517 5518 5519 5520 5521 5522 5523 5524 5525 5526 5527 5528 5529 5530 5531 5532 5533 5534 5535 5536 5537 5538 5539 5540 5541 5542 5543 5544 5545 5546 5547 5548 5549 5550 5551 5552 5553 5554 5555 5556 5557 5558 5559 5560 5561 5562 5563 5564 5565 5566 5567 5568 5569 5570 5571 5572 5573 5574 5575 5576 5577 5578 5579 5580 5581 5582 5583 5584 5585 5586 5587 5588 5589 5590 5591 5592 5593 5594 5595 5596 5597 5598 5599 5600 5601 5602 5603 5604 5605 5606 5607 5608 5609 5610 5611 5612 5613 5614 5615 5616 5617 5618 5619 5620 5621 5622 5623 5624 5625 5626 5627 5628 5629 5630 5631 5632 5633 5634 5635 5636 5637 5638 5639 5640 5641 5642 5643 5644 5645 5646 5647 5648 5649 5650 5651 5652 5653 5654 5655 5656 5657 5658 5659 5660 5661 5662 5663 5664 5665 5666 5667 5668 5669 5670 5671 5672 5673 5674 5675 5676 5677 5678 5679 5680 5681 5682 5683 5684 5685 5686 5687 5688 5689 5690 5691 5692 5693 5694 5695 5696 5697 5698 5699 5700 5701 5702 5703 5704 5705 5706 5707 5708 5709 5710 5711 5712 5713 5714 5715 5716 5717 5718 5719 5720 5721 5722 5723 5724 5725 5726 5727 5728 5729 5730 5731 5732 5733 5734 5735 5736 5737 5738 5739 5740 5741 5742 5743 5744 5745 5746 5747 5748 5749 5750 5751 5752 5753 5754 5755 5756 5757 5758 5759 5760 5761 5762 5763 5764 5765 5766 5767 5768 5769 5770 5771 5772 5773 5774 5775 5776 5777 5778 5779 5780 5781 5782 5783 5784 5785 5786 5787 5788 5789 5790 5791 5792 5793 5794 5795 5796 5797 5798 5799 5800 5801 5802 5803 5804 5805 5806 5807 5808 5809 5810 5811 5812 5813 5814 5815 5816 5817 5818 5819 5820 5821 5822 5823 5824 5825 5826 5827 5828 5829 5830 5831 5832 5833 5834 5835 5836 5837 5838 5839 5840 5841 5842 5843 5844 5845 5846 5847 5848 5849 5850 5851 5852 5853 5854 5855 5856 5857 5858 5859 5860 5861 5862 5863 5864 5865 5866 5867 5868 5869 5870 5871 5872 5873 5874 5875 5876 5877 5878 5879 5880 5881 5882 5883 5884 5885 5886 5887 5888 5889 5890 5891 5892 5893 5894 5895 5896 5897 5898 5899 5900 5901 5902 5903 5904 5905 5906 5907 5908 5909 5910 5911 5912 5913 5914 5915 5916 5917 5918 5919 5920 5921 5922 5923 5924 5925 5926 5927 5928 5929 5930 5931 5932 5933 5934 5935 5936 5937 5938 5939 5940 5941 5942 5943 5944 5945 5946 5947 5948 5949 5950 5951 5952 5953 5954 5955 5956 5957 5958 5959 5960 5961 5962 5963 5964 5965 5966 5967 5968 5969 5970 5971 5972 5973 5974 5975 5976 5977 5978 5979 5980 5981 5982 5983 5984 5985 5986 5987 5988 5989 5990 5991 5992 5993 5994 5995 5996 5997 5998 5999 6000 6001 6002 6003 6004 6005 6006 6007 6008 6009 6010 6011 6012 6013 6014 6015 6016 6017 6018 6019 6020 6021 6022 6023 6024 6025 6026 6027 6028 6029 6030 6031 6032 6033 6034 6035 6036 6037 6038 6039 6040 6041 6042 6043 6044 6045 6046 6047 6048 6049 6050 6051 6052 6053 6054 6055 6056 6057 6058 6059 6060 6061 6062 6063 6064 6065 6066 6067 6068 6069 6070 6071 6072 6073 6074 6075 6076 6077 6078 6079 6080 6081 6082 6083 6084 6085 6086 6087 6088 6089 6090 6091 6092 6093 6094 6095 6096 6097 6098 6099 6100 6101 6102 6103 6104 6105 6106 6107 6108 6109 6110 6111 6112 6113 6114 6115 6116 6117 6118 6119 6120 6121 6122 6123 6124 6125 6126 6127 6128 6129 6130 6131 6132 6133 6134 6135 6136 6137 6138 6139 6140 6141 6142 6143 6144 6145 6146 6147 6148 6149 6150 6151 6152 6153 6154 6155 6156 6157 6158 6159 6160 6161 6162 6163 6164 6165 6166 6167 6168 6169 6170 6171 6172 6173 6174 6175 6176 6177 6178 6179 6180 6181 6182 6183 6184 6185 6186 6187 6188 6189 6190 6191 6192 6193 6194 6195 6196 6197 6198 6199 6200 6201 6202 6203 6204 6205 6206 6207 6208 6209 6210 6211 6212 6213 6214 6215 6216 6217 6218 6219 6220 6221 6222 6223 6224 6225 6226 6227 6228 6229 6230 6231 6232 6233 6234 6235 6236 6237 6238 6239 6240 6241 6242 6243 6244 6245 6246 6247 6248 6249 6250 6251 6252 6253 6254 6255 6256 6257 6258 6259 6260 6261 6262 6263 6264 6265 6266 6267 6268 6269 6270 6271 6272 6273 6274 6275 6276 6277 6278 6279 6280 6281 6282 6283 6284 6285 6286 6287 6288 6289 6290 6291 6292 6293 6294 6295 6296 6297 6298 6299 6300 6301 6302 6303 6304 6305 6306 6307 6308 6309 6310 6311 6312 6313 6314 6315 6316 6317 6318 6319 6320 6321 6322 6323 6324 6325 6326 6327 6328 6329 6330 6331 6332 6333 6334 6335 6336 6337 6338 6339 6340 6341 6342 6343 6344 6345 6346 6347 6348 6349 6350 6351 6352 6353 6354 6355 6356 6357 6358 6359 6360 6361 6362 6363 6364 6365 6366 6367 6368 6369 6370 6371 6372 6373 6374 6375 6376 6377 6378 6379 6380 6381 6382 6383 6384 6385 6386 6387 6388 6389 6390 6391 6392 6393 6394 6395 6396 6397 6398 6399 6400 6401 6402 6403 6404 6405 6406 6407 6408 6409 6410 6411 6412 6413 6414 6415 6416 6417 6418 6419 6420 6421 6422 6423 6424 6425 6426 6427 6428 6429 6430 6431 6432 6433 6434 6435 6436 6437 6438 6439 6440 6441 6442 6443 6444 6445 6446 6447 6448 6449 6450 6451 6452 6453 6454 6455 6456 6457 6458 6459 6460 6461 6462 6463 6464 6465 6466 6467 6468 6469 6470 6471 6472 6473 6474 6475 6476 6477 6478 6479 6480 6481 6482 6483 6484 6485 6486 6487 6488 6489 6490 6491 6492 6493 6494 6495 6496 6497 6498 6499 6500 6501 6502 6503 6504 6505 6506 6507 6508 6509 6510 6511 6512 6513 6514 6515 6516 6517 6518 6519 6520 6521 6522 6523 6524 6525 6526 6527 6528 6529 6530 6531 6532 6533 6534 6535 6536 6537 6538 6539 6540 6541 6542 6543 6544 6545 6546 6547 6548 6549 6550 6551 6552 6553 6554 6555 6556 6557 6558 6559 6560 6561 6562 6563 6564 6565 6566 6567 6568 6569 6570 6571 6572 6573 6574 6575 6576 6577 6578 6579 6580 6581 6582 6583 6584 6585 6586 6587 6588 6589 6590 6591 6592 6593 6594 6595 6596 6597 6598 6599 6600 6601 6602 6603 6604 6605 6606 6607 6608 6609 6610 6611 6612 6613 6614 6615 6616 6617 6618 6619 6620 6621 6622 6623 6624 6625 6626 6627 6628 6629 6630 6631 6632 6633 6634 6635 6636 6637 6638 6639 6640 6641 6642 6643 6644 6645 6646 6647 6648 6649 6650 6651 6652 6653 6654 6655 6656 6657 6658 6659 6660 6661 6662 6663 6664 6665 6666 6667 6668 6669 6670 6671 6672 6673 6674 6675 6676 6677 6678 6679 6680 6681 6682 6683 6684 6685 6686 6687 6688 6689 6690 6691 6692 6693 6694 6695 6696 6697 6698 6699 6700 6701 6702 6703 6704 6705 6706 6707 6708 6709 6710 6711 6712 6713 6714 6715 6716 6717 6718 6719 6720 6721 6722 6723 6724 6725 6726 6727 6728 6729 6730 6731 6732 6733 6734 6735 6736 6737 6738 6739 6740 6741 6742 6743 6744 6745 6746 6747 6748 6749 6750 6751 6752 6753 6754 6755 6756 6757 6758 6759 6760 6761 6762 6763 6764 6765 6766 6767 6768 6769 6770 6771 6772 6773 6774 6775 6776 6777 6778 6779 6780 6781 6782 6783 6784 6785 6786 6787 6788 6789 6790 6791 6792 6793 6794 6795 6796 6797 6798 6799 6800 6801 6802 6803 6804 6805 6806 6807 6808 6809 6810 6811 6812 6813 6814 6815 6816 6817 6818 6819 6820 6821 6822 6823 6824 6825 6826 6827 6828 6829 6830 6831 6832 6833 6834 6835 6836 6837 6838 6839 6840 6841 6842 6843 6844 6845 6846 6847 6848 6849 6850 6851 6852 6853 6854 6855 6856 6857 6858 6859 6860 6861 6862 6863 6864 6865 6866 6867 6868 6869 6870 6871 6872 6873 6874 6875 6876 6877 6878 6879 6880 6881 6882 6883 6884 6885 6886 6887 6888 6889 6890 6891 6892 6893 6894 6895 6896 6897 6898 6899 6900 6901 6902 6903 6904 6905 6906 6907 6908 6909 6910 6911 6912 6913 6914 6915 6916 6917 6918 6919 6920 6921 6922 6923 6924 6925 6926 6927 6928 6929 6930 6931 6932 6933 6934 6935 6936 6937 6938 6939 6940 6941 6942 6943 6944 6945 6946 6947 6948 6949 6950 6951 6952 6953 6954 6955 6956 6957 6958 6959 6960 6961 6962 6963 6964 6965 6966 6967 6968 6969 6970 6971 6972 6973 6974 6975 6976 6977 6978 6979 6980 6981 6982 6983 6984 6985 6986 6987 6988 6989 6990 6991 6992 6993 6994 6995 6996 6997 6998 6999 7000 7001 7002 7003 7004 7005 7006 7007 7008 7009 7010 7011 7012 7013 7014 7015 7016 7017 7018 7019 7020 7021 7022 7023 7024 7025 7026 7027 7028 7029 7030 7031 7032 7033 7034 7035 7036 7037 7038 7039 7040 7041 7042 7043 7044 7045 7046 7047 7048 7049 7050 7051 7052 7053 7054 7055 7056 7057 7058 7059 7060 7061 7062 7063 7064 7065 7066 7067 7068 7069 7070 7071 7072 7073 7074 7075 7076 7077 7078 7079 7080 7081 7082 7083 7084 7085 7086 7087 7088 7089 7090 7091 7092 7093 7094 7095 7096 7097 7098 7099 7100 7101 7102 7103 7104 7105 7106 7107 7108 7109 7110 7111 7112 7113 7114 7115 7116 7117 7118 7119 7120 7121 7122 7123 7124 7125 7126 7127 7128 7129 7130 7131 7132 7133 7134 7135 7136 7137 7138 7139 7140 7141 7142 7143 7144 7145 7146 7147 7148 7149 7150 7151 7152 7153 7154 7155 7156 7157 7158 7159 7160 7161 7162 7163 7164 7165 7166 7167 7168 7169 7170 7171 7172 7173 7174 7175 7176 7177 7178 7179 7180 7181 7182 7183 7184 7185 7186 7187 7188 7189 7190 7191 7192 7193 7194 7195 7196 7197 7198 7199 7200 7201 7202 7203 7204 7205 7206 7207 7208 7209 7210 7211 7212 7213 7214 7215 7216 7217 7218 7219 7220 7221 7222 7223 7224 7225 7226 7227 7228 7229 7230 7231 7232 7233 7234 7235 7236 7237 7238 7239 7240 7241 7242 7243 7244 7245 7246 7247 7248 7249 7250 7251 7252 7253 7254 7255 7256 7257 7258 7259 7260 7261 7262 7263 7264 7265 7266 7267 7268 7269 7270 7271 7272 7273 7274 7275 7276 7277 7278 7279 7280 7281 7282 7283 7284 7285 7286 7287 7288 7289 7290 7291 7292 7293 7294 7295 7296 7297 7298 7299 7300 7301 7302 7303 7304 7305 7306 7307 7308 7309 7310 7311 7312 7313 7314 7315 7316 7317 7318 7319 7320 7321 7322 7323 7324 7325 7326 7327 7328 7329 7330 7331 7332 7333 7334 7335 7336 7337 7338 7339 7340 7341 7342 7343 7344 7345 7346 7347 7348 7349 7350 7351 7352 7353 7354 7355 7356 7357 7358 7359 7360 7361 7362 7363 7364 7365 7366 7367 7368 7369 7370 7371 7372 7373 7374 7375 7376 7377 7378 7379 7380 7381 7382 7383 7384 7385 7386 7387 7388 7389 7390 7391 7392 7393 7394 7395 7396 7397 7398 7399 7400 7401 7402 7403 7404 7405 7406 7407 7408 7409 7410 7411 7412 7413 7414 7415 7416 7417 7418 7419 7420 7421 7422 7423 7424 7425 7426 7427 7428 7429 7430 7431 7432 7433 7434 7435 7436 7437 7438 7439 7440 7441 7442 7443 7444 7445 7446 7447 7448 7449 7450 7451 7452 7453 7454 7455 7456 7457 7458 7459 7460 7461 7462 7463 7464 7465 7466 7467 7468 7469 7470 7471 7472 7473 7474 7475 7476 7477 7478 7479 7480 7481 7482 7483 7484 7485 7486 7487 7488 7489 7490 7491 7492 7493 7494 7495 7496 7497 7498 7499 7500 7501 7502 7503 7504 7505 7506 7507 7508 7509 7510 7511 7512 7513 7514 7515 7516 7517 7518 7519 7520 7521 7522 7523 7524 7525 7526 7527 7528 7529 7530 7531 7532 7533 7534 7535 7536 7537 7538 7539 7540 7541 7542 7543 7544 7545 7546 7547 7548 7549 7550 7551 7552 7553 7554 7555 7556 7557 7558 7559 7560 7561 7562 7563 7564 7565 7566 7567 7568 7569 7570 7571 7572 7573 7574 7575 7576 7577 7578 7579 7580 7581 7582 7583 7584 7585 7586 7587 7588 7589 7590 7591 7592 7593 7594 7595 7596 7597 7598 7599 7600 7601 7602 7603 7604 7605 7606 7607 7608 7609 7610 7611 7612 7613 7614 7615 7616 7617 7618 7619 7620 7621 7622 7623 7624 7625 7626 7627 7628 7629 7630 7631 7632 7633 7634 7635 7636 7637 7638 7639 7640 7641 7642 7643 7644 7645 7646 7647 7648 7649 7650 7651 7652 7653 7654 7655 7656 7657 7658 7659 7660 7661 7662 7663 7664 7665 7666 7667 7668 7669 7670 7671 7672 7673 7674 7675 7676 7677 7678 7679 7680 7681 7682 7683 7684 7685 7686 7687 7688 7689 7690 7691 7692 7693 7694 7695 7696 7697 7698 7699 7700 7701 7702 7703 7704 7705 7706 7707 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7719 7720 7721 7722 7723 7724 7725 7726 7727 7728 7729 7730 7731 7732 7733 7734 7735 7736 7737 7738 7739 7740 7741 7742 7743 7744 7745 7746 7747 7748 7749 7750 7751 7752 7753 7754 7755 7756 7757 7758 7759 7760 7761 7762 7763 7764 7765 7766 7767 7768 7769 7770 7771 7772 7773 7774 7775 7776 7777 7778 7779 7780 7781 7782 7783 7784 7785 7786 7787 7788 7789 7790 7791 7792 7793 7794 7795 7796 7797 7798 7799 7800 7801 7802 7803 7804 7805 7806 7807 7808 7809 7810 7811 7812 7813 7814 7815 7816 7817 7818 7819 7820 7821 7822 7823 7824 7825 7826 7827 7828 7829 7830 7831 7832 7833 7834 7835 7836 7837 7838 7839 7840 7841 7842 7843 7844 7845 7846 7847 7848 7849 7850 7851 7852 7853 7854 7855 7856 7857 7858 7859 7860 7861 7862 7863 7864 7865 7866 7867 7868 7869 7870 7871 7872 7873 7874 7875 7876 7877 7878 7879 7880 7881 7882 7883 7884 7885 7886 7887 7888 7889 7890 7891 7892 7893 7894 7895 7896 7897 7898 7899 7900 7901 7902 7903 7904 7905 7906 7907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 7921 7922 7923 7924 7925 7926 7927 7928 7929 7930 7931 7932 7933 7934 7935 7936 7937 7938 7939 7940 7941 7942 7943 7944 7945 7946 7947 7948 7949 7950 7951 7952 7953 7954 7955 7956 7957 7958 7959 7960 7961 7962 7963 7964 7965 7966 7967 7968 7969 7970 7971 7972 7973 7974 7975 7976 7977 7978 7979 7980 7981 7982 7983 7984 7985 7986 7987 7988 7989 7990 7991 7992 7993 7994 7995 7996 7997 7998 7999 8000 8001 8002 8003 8004 8005 8006 8007 8008 8009 8010 8011 8012 8013 8014 8015 8016 8017 8018 8019 8020 8021 8022 8023 8024 8025 8026 8027 8028 8029 8030 8031 8032 8033 8034 8035 8036 8037 8038 8039 8040 8041 8042 8043 8044 8045 8046 8047 8048 8049 8050 8051 8052 8053 8054 8055 8056 8057 8058 8059 8060 8061 8062 8063 8064 8065 8066 8067 8068 8069 8070 8071 8072 8073 8074 8075 8076 8077 8078 8079 8080 8081 8082 8083 8084 8085 8086 8087 8088 8089 8090 8091 8092 8093 8094 8095 8096 8097 8098 8099 8100 8101 8102 8103 8104 8105 8106 8107 8108 8109 8110 8111 8112 8113 8114 8115 8116 8117 8118 8119 8120 8121 8122 8123 8124 8125 8126 8127 8128 8129 8130 8131 8132 8133 8134 8135 8136 8137 8138 8139 8140 8141 8142 8143 8144 8145 8146 8147 8148 8149 8150 8151 8152 8153 8154 8155 8156 8157 8158 8159 8160 8161 8162 8163 8164 8165 8166 8167 8168 8169 8170 8171 8172 8173 8174 8175 8176 8177 8178 8179 8180 8181 8182 8183 8184 8185 8186 8187 8188 8189 8190 8191 8192 8193 8194 8195 8196 8197 8198 8199 8200 8201 8202 8203 8204 8205 8206 8207 8208 8209 8210 8211 8212 8213 8214 8215 8216 8217 8218 8219 8220 8221 8222 8223 8224 8225 8226 8227 8228 8229 8230 8231 8232 8233 8234 8235 8236 8237 8238 8239 8240 8241 8242 8243 8244 8245 8246 8247 8248 8249 8250 8251 8252 8253 8254 8255 8256 8257 8258 8259 8260 8261 8262 8263 8264 8265 8266 8267 8268 8269 8270 8271 8272 8273 8274 8275 8276 8277 8278 8279 8280 8281 8282 8283 8284 8285 8286 8287 8288 8289 8290 8291 8292 8293 8294 8295 8296 8297 8298 8299 8300 8301 8302 8303 8304 8305 8306 8307 8308 8309 8310 8311 8312 8313 8314 8315 8316 8317 8318 8319 8320 8321 8322 8323 8324 8325 8326 8327 8328 8329 8330 8331 8332 8333 8334 8335 8336 8337 8338 8339 8340 8341 8342 8343 8344 8345 8346 8347 8348 8349 8350 8351 8352 8353 8354 8355 8356 8357 8358 8359 8360 8361 8362 8363 8364 8365 8366 8367 8368 8369 8370 8371 8372 8373 8374 8375 8376 8377 8378 8379 8380 8381 8382 8383 8384 8385 8386 8387 8388 8389 8390 8391 8392 8393 8394 8395 8396 8397 8398 8399 8400 8401 8402 8403 8404 8405 8406 8407 8408 8409 8410 8411 8412 8413 8414 8415 8416 8417 8418 8419 8420 8421 8422 8423 8424 8425 8426 8427 8428 8429 8430 8431 8432 8433 8434 8435 8436 8437 8438 8439 8440 8441 8442 8443 8444 8445 8446 8447 8448 8449 8450 8451 8452 8453 8454 8455 8456 8457 8458 8459 8460 8461 8462 8463 8464 8465 8466 8467 8468 8469 8470 8471 8472 8473 8474 8475 8476 8477 8478 8479 8480 8481 8482 8483 8484 8485 8486 8487 8488 8489 8490 8491 8492 8493 8494 8495 8496 8497 8498 8499 8500 8501 8502 8503 8504 8505 8506 8507 8508 8509 8510 8511 8512 8513 8514 8515 8516 8517 8518 8519 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 8580 8581 8582 8583 8584 8585 8586 8587 8588 8589 8590 8591 8592 8593 8594 8595 8596 8597 8598 8599 8600 8601 8602 8603 8604 8605 8606 8607 8608 8609 8610 8611 8612 8613 8614 8615 8616 8617 8618 8619 8620 8621 8622 8623 8624 8625 8626 8627 8628 8629 8630 8631 8632 8633 8634 8635 8636 8637 8638 8639 8640 8641 8642 8643 8644 8645 8646 8647 8648 8649 8650 8651 8652 8653 8654 8655 8656 8657 8658 8659 8660 8661 8662 8663 8664 8665 8666 8667 8668 8669 8670 8671 8672 8673 8674 8675 8676 8677 8678 8679 8680 8681 8682 8683 8684 8685 8686 8687 8688 8689 8690 8691 8692 8693 8694 8695 8696 8697 8698 8699 8700 8701 8702 8703 8704 8705 8706 8707 8708 8709 8710 8711 8712 8713 8714 8715 8716 8717 8718 8719 8720 8721 8722 8723 8724 8725 8726 8727 8728 8729 8730 8731 8732 8733 8734 8735 8736 8737 8738 8739 8740 8741 8742 8743 8744 8745 8746 8747 8748 8749 8750 8751 8752 8753 8754 8755 8756 8757 8758 8759 8760 8761 8762 8763 8764 8765 8766 8767 8768 8769 8770 8771 8772 8773 8774 8775 8776 8777 8778 8779 8780 8781 8782 8783 8784 8785 8786 8787 8788 8789 8790 8791 8792 8793 8794 8795 8796 8797 8798 8799 8800 8801 8802 8803 8804 8805 8806 8807 8808 8809 8810 8811 8812 8813 8814 8815 8816 8817 8818 8819 8820 8821 8822 8823 8824 8825 8826 8827 8828 8829 8830 8831 8832 8833 8834 8835 8836 8837 8838 8839 8840 8841 8842 8843 8844 8845 8846 8847 8848 8849 8850 8851 8852 8853 8854 8855 8856 8857 8858 8859 8860 8861 8862 8863 8864 8865 8866 8867 8868 8869 8870 8871 8872 8873 8874 8875 8876 8877 8878 8879 8880 8881 8882 8883 8884 8885 8886 8887 8888 8889 8890 8891 8892 8893 8894 8895 8896 8897 8898 8899 8900 8901 8902 8903 8904 8905 8906 8907 8908 8909 8910 8911 8912 8913 8914 8915 8916 8917 8918 8919 8920 8921 8922 8923 8924 8925 8926 8927 8928 8929 8930 8931 8932 8933 8934 8935 8936 8937 8938 8939 8940 8941 8942 8943 8944 8945 8946 8947 8948 8949 8950 8951 8952 8953 8954 8955 8956 8957 8958 8959 8960 8961 8962 8963 8964 8965 8966 8967 8968 8969 8970 8971 8972 8973 8974 8975 8976 8977 8978 8979 8980 8981 8982 8983 8984 8985 8986 8987 8988 8989 8990 8991 8992 8993 8994 8995 8996 8997 8998 8999 9000 9001 9002 9003 9004 9005 9006 9007 9008 9009 9010 9011 9012 9013 9014 9015 9016 9017 9018 9019 9020 9021 9022 9023 9024 9025 9026 9027 9028 9029 9030 9031 9032 9033 9034 9035 9036 9037 9038 9039 9040 9041 9042 9043 9044 9045 9046 9047 9048 9049 9050 9051 9052 9053 9054 9055 9056 9057 9058 9059 9060 9061 9062 9063 9064 9065 9066 9067 9068 9069 9070 9071 9072 9073 9074 9075 9076 9077 9078 9079 9080 9081 9082 9083 9084 9085 9086 9087 9088 9089 9090 9091 9092 9093 9094 9095 9096 9097 9098 9099 9100 9101 9102 9103 9104 9105 9106 9107 9108 9109 9110 9111 9112 9113 9114 9115 9116 9117 9118 9119 9120 9121 9122 9123 9124 9125 9126 9127 9128 9129 9130 9131 9132 9133 9134 9135 9136 9137 9138 9139 9140 9141 9142 9143 9144 9145 9146 9147 9148 9149 9150 9151 9152 9153 9154 9155 9156 9157 9158 9159 9160 9161 9162 9163 9164 9165 9166 9167 9168 9169 9170 9171 9172 9173 9174 9175 9176 9177 9178 9179 9180 9181 9182 9183 9184 9185 9186 9187 9188 9189 9190 9191 9192 9193 9194 9195 9196 9197 9198 9199 9200 9201 9202 9203 9204 9205 9206 9207 9208 9209 9210 9211 9212 9213 9214 9215 9216 9217 9218 9219 9220 9221 9222 9223 9224 9225 9226 9227 9228 9229 9230 9231 9232 9233 9234 9235 9236 9237 9238 9239 9240 9241 9242 9243 9244 9245 9246 9247 9248 9249 9250 9251 9252 9253 9254 9255 9256 9257 9258 9259 9260 9261 9262 9263 9264 9265 9266 9267 9268 9269 9270 9271 9272 9273 9274 9275 9276 9277 9278 9279 9280 9281 9282 9283 9284 9285 9286 9287 9288 9289 9290 9291 9292 9293 9294 9295 9296 9297 9298 9299 9300 9301 9302 9303 9304 9305 9306 9307 9308 9309 9310 9311 9312 9313 9314 9315 9316 9317 9318 9319 9320 9321 9322 9323 9324 9325 9326 9327 9328 9329 9330 9331 9332 9333 9334 9335 9336 9337 9338 9339 9340 9341 9342 9343 9344 9345 9346 9347 9348 9349 9350 9351 9352 9353 9354 9355 9356 9357 9358 9359 9360 9361 9362 9363 9364 9365 9366 9367 9368 9369 9370 9371 9372 9373 9374 9375 9376 9377 9378 9379 9380 9381 9382 9383 9384 9385 9386 9387 9388 9389 9390 9391 9392 9393 9394 9395 9396 9397 9398 9399 9400 9401 9402 9403 9404 9405 9406 9407 9408 9409 9410 9411 9412 9413 9414 9415 9416 9417 9418 9419 9420 9421 9422 9423 9424 9425 9426 9427 9428 9429 9430 9431 9432 9433 9434 9435 9436 9437 9438 9439 9440 9441 9442 9443 9444 9445 9446 9447 9448 9449 9450 9451 9452 9453 9454 9455 9456 9457 9458 9459 9460 9461 9462 9463 9464 9465 9466 9467 9468 9469 9470 9471 9472 9473 9474 9475 9476 9477 9478 9479 9480 9481 9482 9483 9484 9485 9486 9487 9488 9489 9490 9491 9492 9493 9494 9495 9496 9497 9498 9499 9500 9501 9502 9503 9504 9505 9506 9507 9508 9509 9510 9511 9512 9513 9514 9515 9516 9517 9518 9519 9520 9521 9522 9523 9524 9525 9526 9527 9528 9529 9530 9531 9532 9533 9534 9535 9536 9537 9538 9539 9540 9541 9542 9543 9544 9545 9546 9547 9548 9549 9550 9551 9552 9553 9554 9555 9556 9557 9558 9559 9560 9561 9562 9563 9564 9565 9566 9567 9568 9569 9570 9571 9572 9573 9574 9575 9576 9577 9578 9579 9580 9581 9582 9583 9584 9585 9586 9587 9588 9589 9590 9591 9592 9593 9594 9595 9596 9597 9598 9599 9600 9601 9602 9603 9604 9605 9606 9607 9608 9609 9610 9611 9612 9613 9614 9615 9616 9617 9618 9619 9620 9621 9622 9623 9624 9625 9626 9627 9628 9629 9630 9631 9632 9633 9634 9635 9636 9637 9638 9639 9640 9641 9642 9643 9644 9645 9646 9647 9648 9649 9650 9651 9652 9653 9654 9655 9656 9657 9658 9659 9660 9661 9662 9663 9664 9665 9666 9667 9668 9669 9670 9671 9672 9673 9674 9675 9676 9677 9678 9679 9680 9681 9682 9683 9684 9685 9686 9687 9688 9689 9690 9691 9692 9693 9694 9695 9696 9697 9698 9699 9700 9701 9702 9703 9704 9705 9706 9707 9708 9709 9710 9711 9712 9713 9714 9715 9716 9717 9718 9719 9720 9721 9722 9723 9724 9725 9726 9727 9728 9729 9730 9731 9732 9733 9734 9735 9736 9737 9738 9739 9740 9741 9742 9743 9744 9745 9746 9747 9748 9749 9750 9751 9752 9753 9754 9755 9756 9757 9758 9759 9760 9761 9762 9763 9764 9765 9766 9767 9768 9769 9770 9771 9772 9773 9774 9775 9776 9777 9778 9779 9780 9781 9782 9783 9784 9785 9786 9787 9788 9789 9790 9791 9792 9793 9794 9795 9796 9797 9798 9799 9800 9801 9802 9803 9804 9805 9806 9807 9808 9809 9810 9811 9812 9813 9814 9815 9816 9817 9818 9819 9820 9821 9822 9823 9824 9825 9826 9827 9828 9829 9830 9831 9832 9833 9834 9835 9836 9837 9838 9839 9840 9841 9842 9843 9844 9845 9846 9847 9848 9849 9850 9851 9852 9853 9854 9855 9856 9857 9858 9859 9860 9861 9862 9863 9864 9865 9866 9867 9868 9869 9870 9871 9872 9873 9874 9875 9876 9877 9878 9879 9880 9881 9882 9883 9884 9885 9886 9887 9888 9889 9890 9891 9892 9893 9894 9895 9896 9897 9898 9899 9900 9901 9902 9903 9904 9905 9906 9907 9908 9909 9910 9911 9912 9913 9914 9915 9916 9917 9918 9919 9920 9921 9922 9923 9924 9925 9926 9927 9928 9929 9930 9931 9932 9933 9934 9935 9936 9937 9938 9939 9940 9941 9942 9943 9944 9945 9946 9947 9948 9949 9950 9951 9952 9953 9954 9955 9956 9957 9958 9959 9960 9961 9962 9963 9964 9965 9966 9967 9968 9969 9970 9971 9972 9973 9974 9975 9976 9977 9978 9979 9980 9981 9982 9983 9984 9985 9986 9987 9988 9989 9990 9991 9992 9993 9994 9995 9996 9997 9998 9999 10000 10001 10002 10003 10004 10005 10006 10007 10008 10009 10010 10011 10012 10013 10014 10015 10016 10017 10018 10019 10020 10021 10022 10023 10024 10025 10026 10027 10028 10029 10030 10031 10032 10033 10034 10035 10036 10037 10038 10039 10040 10041 10042 10043 10044 10045 10046 10047 10048 10049 10050 10051 10052 10053 10054 10055 10056 10057 10058 10059 10060 10061 10062 10063 10064 10065 10066 10067 10068 10069 10070 10071 10072 10073 10074 10075 10076 10077 10078 10079 10080 10081 10082 10083 10084 10085 10086 10087 10088 10089 10090 10091 10092 10093 10094 10095 10096 10097 10098 10099 10100 10101 10102 10103 10104 10105 10106 10107 10108 10109 10110 10111 10112 10113 10114 10115 10116 10117 10118 10119 10120 10121 10122 10123 10124 10125 10126 10127 10128 10129 10130 10131 10132 10133 10134 10135 10136 10137 10138 10139 10140 10141 10142 10143 10144 10145 10146 10147 10148 10149 10150 10151 10152 10153 10154 10155 10156 10157 10158 10159 10160 10161 10162 10163 10164 10165 10166 10167 10168 10169 10170 10171 10172 10173 10174 10175 10176 10177 10178 10179 10180 10181 10182 10183 10184 10185 10186 10187 10188 10189 10190 10191 10192 10193 10194 10195 10196 10197 10198 10199 10200 10201 10202 10203 10204 10205 10206 10207 10208 10209 10210 10211 10212 10213 10214 10215 10216 10217 10218 10219 10220 10221 10222 10223 10224 10225 10226 10227 10228 10229 10230 10231 10232 10233 10234 10235 10236 10237 10238 10239 10240 10241 10242 10243 10244 10245 10246 10247 10248 10249 10250 10251 10252 10253 10254 10255 10256 10257 10258 10259 10260 10261 10262 10263 10264 10265 10266 10267 10268 10269 10270 10271 10272 10273 10274 10275 10276 10277 10278 10279 10280 10281 10282 10283 10284 10285 10286 10287 10288 10289 10290 10291 10292 10293 10294 10295 10296 10297 10298 10299 10300 10301 10302 10303 10304 10305 10306 10307 10308 10309 10310 10311 10312 10313 10314 10315 10316 10317 10318 10319 10320 10321 10322 10323 10324 10325 10326 10327 10328 10329 10330 10331 10332 10333 10334 10335 10336 10337 10338 10339 10340 10341 10342 10343 10344 10345 10346 10347 10348 10349 10350 10351 10352 10353 10354 10355 10356 10357 10358 10359 10360 10361 10362 10363 10364 10365 10366 10367 10368 10369 10370 10371 10372 10373 10374 10375 10376 10377 10378 10379 10380 10381 10382 10383 10384 10385 10386 10387 10388 10389 10390 10391 10392 10393 10394 10395 10396 10397 10398 10399 10400 10401 10402 10403 10404 10405 10406 10407 10408 10409 10410 10411 10412 10413 10414 10415 10416 10417 10418 10419 10420 10421 10422 10423 10424 10425 10426 10427 10428 10429 10430 10431 10432 10433 10434 10435 10436 10437 10438 10439 10440 10441 10442 10443 10444 10445 10446 10447 10448 10449 10450 10451 10452 10453 10454 10455 10456 10457 10458 10459 10460 10461 10462 10463 10464 10465 10466 10467 10468 10469 10470 10471 10472 10473 10474 10475 10476 10477 10478 10479 10480 10481 10482 10483 10484 10485 10486 10487 10488 10489 10490 10491 10492 10493 10494 10495 10496 10497 10498 10499 10500 10501 10502 10503 10504 10505 10506 10507 10508 10509 10510 10511 10512 10513 10514 10515 10516 10517 10518 10519 10520 10521 10522 10523 10524 10525 10526 10527 10528 10529 10530 10531 10532 10533 10534 10535 10536 10537 10538 10539 10540 10541 10542 10543 10544 10545 10546 10547 10548 10549 10550 10551 10552 10553 10554 10555 10556 10557 10558 10559 10560 10561 10562 10563 10564 10565 10566 10567 10568 10569 10570 10571 10572 10573 10574 10575 10576 10577 10578 10579 10580 10581 10582 10583 10584 10585 10586 10587 10588 10589 10590 10591 10592 10593 10594 10595 10596 10597 10598 10599 10600 10601 10602 10603 10604 10605 10606 10607 10608 10609 10610 10611 10612 10613 10614 10615 10616 10617 10618 10619 10620 10621 10622 10623 10624 10625 10626 10627 10628 10629 10630 10631 10632 10633 10634 10635 10636 10637 10638 10639 10640 10641 10642 10643 10644 10645 10646 10647 10648 10649 10650 10651 10652 10653 10654 10655 10656 10657 10658 10659 10660 10661 10662 10663 10664 10665 10666 10667 10668 10669 10670 10671 10672 10673 10674 10675 10676 10677 10678 10679 10680 10681 10682 10683 10684 10685 10686 10687 10688 10689 10690 10691 10692 10693 10694 10695 10696 10697 10698 10699 10700 10701 10702 10703 10704 10705 10706 10707 10708 10709 10710 10711 10712 10713 10714 10715 10716 10717 10718 10719 10720 10721 10722 10723 10724 10725 10726 10727 10728 10729 10730 10731 10732 10733 10734 10735 10736 10737 10738 10739 10740 10741 10742 10743 10744 10745 10746 10747 10748 10749 10750 10751 10752 10753 10754 10755 10756 10757 10758 10759 10760 10761 10762 10763 10764 10765 10766 10767 10768 10769 10770 10771 10772 10773 10774 10775 10776 10777 10778 10779 10780 10781 10782 10783 10784 10785 10786 10787 10788 10789 10790 10791 10792 10793 10794 10795 10796 10797 10798 10799 10800 10801 10802 10803 10804 10805 10806 10807 10808 10809 10810 10811 10812 10813 10814 10815 10816 10817 10818 10819 10820 10821 10822 10823 10824 10825 10826 10827 10828 10829 10830 10831 10832 10833 10834 10835 10836 10837 10838 10839 10840 10841 10842 10843 10844 10845 10846 10847 10848 10849 10850 10851 10852 10853 10854 10855 10856 10857 10858 10859 10860 10861 10862 10863 10864 10865 10866 10867 10868 10869 10870 10871 10872 10873 10874 10875 10876 10877 10878 10879 10880 10881 10882 10883 10884 10885 10886 10887 10888 10889 10890 10891 10892 10893 10894 10895 10896 10897 10898 10899 10900 10901 10902 10903 10904 10905 10906 10907 10908 10909 10910 10911 10912 10913 10914 10915 10916 10917 10918 10919 10920 10921 10922 10923 10924 10925 10926 10927 10928 10929 10930 10931 10932 10933 10934 10935 10936 10937 10938 10939 10940 10941 10942 10943 10944 10945 10946 10947 10948 10949 10950 10951 10952 10953 10954 10955 10956 10957 10958 10959 10960 10961 10962 10963 10964 10965 10966 10967 10968 10969 10970 10971 10972 10973 10974 10975 10976 10977 10978 10979 10980 10981 10982 10983 10984 10985 10986 10987 10988 10989 10990 10991 10992 10993 10994 10995 10996 10997 10998 10999 11000 11001 11002 11003 11004 11005 11006 11007 11008 11009 11010 11011 11012 11013 11014 11015 11016 11017 11018 11019 11020 11021 11022 11023 11024 11025 11026 11027 11028 11029 11030 11031 11032 11033 11034 11035 11036 11037 11038 11039 11040 11041 11042 11043 11044 11045 11046 11047 11048 11049 11050 11051 11052 11053 11054 11055 11056 11057 11058 11059 11060 11061 11062 11063 11064 11065 11066 11067 11068 11069 11070 11071 11072 11073 11074 11075 11076 11077 11078 11079 11080 11081 11082 11083 11084 11085 11086 11087 11088 11089 11090 11091 11092 11093 11094 11095 11096 11097 11098 11099 11100 11101 11102 11103 11104 11105 11106 11107 11108 11109 11110 11111 11112 11113 11114 11115 11116 11117 11118 11119 11120 11121 11122 11123 11124 11125 11126 11127 11128 11129 11130 11131 11132 11133 11134 11135 11136 11137 11138 11139 11140 11141 11142 11143 11144 11145 11146 11147 11148 11149 11150 11151 11152 11153 11154 11155 11156 11157 11158 11159 11160 11161 11162 11163 11164 11165 11166 11167 11168 11169 11170 11171 11172 11173 11174 11175 11176 11177 11178 11179 11180 11181 11182 11183 11184 11185 11186 11187 11188 11189 11190 11191 11192 11193 11194 11195 11196 11197 11198 11199 11200 11201 11202 11203 11204 11205 11206 11207 11208 11209 11210 11211 11212 11213 11214 11215 11216 11217 11218 11219 11220 11221 11222 11223 11224 11225 11226 11227 11228 11229 11230 11231 11232 11233 11234 11235 11236 11237 11238 11239 11240 11241 11242 11243 11244 11245 11246 11247 11248 11249 11250 11251 11252 11253 11254 11255 11256 11257 11258 11259 11260 11261 11262 11263 11264 11265 11266 11267 11268 11269 11270 11271 11272 11273 11274 11275 11276 11277 11278 11279 11280 11281 11282 11283 11284 11285 11286 11287 11288 11289 11290 11291 11292 11293 11294 11295 11296 11297 11298 11299 11300 11301 11302 11303 11304 11305 11306 11307 11308 11309 11310 11311 11312 11313 11314 11315 11316 11317 11318 11319 11320 11321 11322 11323 11324 11325 11326 11327 11328 11329 11330 11331 11332 11333 11334 11335 11336 11337 11338 11339 11340 11341 11342 11343 11344 11345 11346 11347 11348 11349 11350 11351 11352 11353 11354 11355 11356 11357 11358 11359 11360 11361 11362 11363 11364 11365 11366 11367 11368 11369 11370 11371 11372 11373 11374 11375 11376 11377 11378 11379 11380 11381 11382 11383 11384 11385 11386 11387 11388 11389 11390 11391 11392 11393 11394 11395 11396 11397 11398 11399 11400 11401 11402 11403 11404 11405 11406 11407 11408 11409 11410 11411 11412 11413 11414 11415 11416 11417 11418 11419 11420 11421 11422 11423 11424 11425 11426 11427 11428 11429 11430 11431 11432 11433 11434 11435 11436 11437 11438 11439 11440 11441 11442 11443 11444 11445 11446 11447 11448 11449 11450 11451 11452 11453 11454 11455 11456 11457 11458 11459 11460 11461 11462 11463 11464 11465 11466 11467 11468 11469 11470 11471 11472 11473 11474 11475 11476 11477 11478 11479 11480 11481 11482 11483 11484 11485 11486 11487 11488 11489 11490 11491 11492 11493 11494 11495 11496 11497 11498 11499 11500 11501 11502 11503 11504 11505 11506 11507 11508 11509 11510 11511 11512 11513 11514 11515 11516 11517 11518 11519 11520 11521 11522 11523 11524 11525 11526 11527 11528 11529 11530 11531 11532 11533 11534 11535 11536 11537 11538 11539 11540 11541 11542 11543 11544 11545 11546 11547 11548 11549 11550 11551 11552 11553 11554 11555 11556 11557 11558 11559 11560 11561 11562 11563 11564 11565 11566 11567 11568 11569 11570 11571 11572 11573 11574 11575 11576 11577 11578 11579 11580 11581 11582 11583 11584 11585 11586 11587 11588 11589 11590 11591 11592 11593 11594 11595 11596 11597 11598 11599 11600 11601 11602 11603 11604 11605 11606 11607 11608 11609 11610 11611 11612 11613 11614 11615 11616 11617 11618 11619 11620 11621 11622 11623 11624 11625 11626 11627 11628 11629 11630 11631 11632 11633 11634 11635 11636 11637 11638 11639 11640 11641 11642 11643 11644 11645 11646 11647 11648 11649 11650 11651 11652 11653 11654 11655 11656 11657 11658 11659 11660 11661 11662 11663 11664 11665 11666 11667 11668 11669 11670 11671 11672 11673 11674 11675 11676 11677 11678 11679 11680 11681 11682 11683 11684 11685 11686 11687 11688 11689 11690 11691 11692 11693 11694 11695 11696 11697 11698 11699 11700 11701 11702 11703 11704 11705 11706 11707 11708 11709 11710 11711 11712 11713 11714 11715 11716 11717 11718 11719 11720 11721 11722 11723 11724 11725 11726 11727 11728 11729 11730 11731 11732 11733 11734 11735 11736 11737 11738 11739 11740 11741 11742 11743 11744 11745 11746 11747 11748 11749 11750 11751 11752 11753 11754 11755 11756 11757 11758 11759 11760 11761 11762 11763 11764 11765 11766 11767 11768 11769 11770 11771 11772 11773 11774 11775 11776 11777 11778 11779 11780 11781 11782 11783 11784 11785 11786 11787 11788 11789 11790 11791 11792 11793 11794 11795 11796 11797 11798 11799 11800 11801 11802 11803 11804 11805 11806 11807 11808 11809 11810 11811 11812 11813 11814 11815 11816 11817 11818 11819 11820 11821 11822 11823 11824 11825 11826 11827 11828 11829 11830 11831 11832 11833 11834 11835 11836 11837 11838 11839 11840 11841 11842 11843 11844 11845 11846 11847 11848 11849 11850 11851 11852 11853 11854 11855 11856 11857 11858 11859 11860 11861 11862 11863 11864 11865 11866 11867 11868 11869 11870 11871 11872 11873 11874 11875 11876 11877 11878 11879 11880 11881 11882 11883 11884 11885 11886 11887 11888 11889 11890 11891 11892 11893 11894 11895 11896 11897 11898 11899 11900 11901 11902 11903 11904 11905 11906 11907 11908 11909 11910 11911 11912 11913 11914 11915 11916 11917 11918 11919 11920 11921 11922 11923 11924 11925 11926 11927 11928 11929 11930 11931 11932 11933 11934 11935 11936 11937 11938 11939 11940 11941 11942 11943 11944 11945 11946 11947 11948 11949 11950 11951 11952 11953 11954 11955 11956 11957 11958 11959 11960 11961 11962 11963 11964 11965 11966 11967 11968 11969 11970 11971 11972 11973 11974 11975 11976 11977 11978 11979 11980 11981 11982 11983 11984 11985 11986 11987 11988 11989 11990 11991 11992 11993 11994 11995 11996 11997 11998 11999 12000 12001 12002 12003 12004 12005 12006 12007 12008 12009 12010 12011 12012 12013 12014 12015 12016 12017 12018 12019 12020 12021 12022 12023 12024 12025 12026 12027 12028 12029 12030 12031 12032 12033 12034 12035 12036 12037 12038 12039 12040 12041 12042 12043 12044 12045 12046 12047 12048 12049 12050 12051 12052 12053 12054 12055 12056 12057 12058 12059 12060 12061 12062 12063 12064 12065 12066 12067 12068 12069 12070 12071 12072 12073 12074 12075 12076 12077 12078 12079 12080 12081 12082 12083 12084 12085 12086 12087 12088 12089 12090 12091 12092 12093 12094 12095 12096 12097 12098 12099 12100 12101 12102 12103 12104 12105 12106 12107 12108 12109 12110 12111 12112 12113 12114 12115 12116 12117 12118 12119 12120 12121 12122 12123 12124 12125 12126 12127 12128 12129 12130 12131 12132 12133 12134 12135 12136 12137 12138 12139 12140 12141 12142 12143 12144 12145 12146 12147 12148 12149 12150 12151 12152 12153 12154 12155 12156 12157 12158 12159 12160 12161 12162 12163 12164 12165 12166 12167 12168 12169 12170 12171 12172 12173 12174 12175 12176 12177 12178 12179 12180 12181 12182 12183 12184 12185 12186 12187 12188 12189 12190 12191 12192 12193 12194 12195 12196 12197 12198 12199 12200 12201 12202 12203 12204 12205 12206 12207 12208 12209 12210 12211 12212 12213 12214 12215 12216 12217 12218 12219 12220 12221 12222 12223 12224 12225 12226 12227 12228 12229 12230 12231 12232 12233 12234 12235 12236 12237 12238 12239 12240 12241 12242 12243 12244 12245 12246 12247 12248 12249 12250 12251 12252 12253 12254 12255 12256 12257 12258 12259 12260 12261 12262 12263 12264 12265 12266 12267 12268 12269 12270 12271 12272 12273 12274 12275 12276 12277 12278 12279 12280 12281 12282 12283 12284 12285 12286 12287 12288 12289 12290 12291 12292 12293 12294 12295 12296 12297 12298 12299 12300 12301 12302 12303 12304 12305 12306 12307 12308 12309 12310 12311 12312 12313 12314 12315 12316 12317 12318 12319 12320 12321 12322 12323 12324 12325 12326 12327 12328 12329 12330 12331 12332 12333 12334 12335 12336 12337 12338 12339 12340 12341 12342 12343 12344 12345 12346 12347 12348 12349 12350 12351 12352 12353 12354 12355 12356 12357 12358 12359 12360 12361 12362 12363 12364 12365 12366 12367 12368 12369 12370 12371 12372 12373 12374 12375 12376 12377 12378 12379 12380 12381 12382 12383 12384 12385 12386 12387 12388 12389 12390 12391 12392 12393 12394 12395 12396 12397 12398 12399 12400 12401 12402 12403 12404 12405 12406 12407 12408 12409 12410 12411 12412 12413 12414 12415 12416 12417 12418 12419 12420 12421 12422 12423 12424 12425 12426 12427 12428 12429 12430 12431 12432 12433 12434 12435 12436 12437 12438 12439 12440 12441 12442 12443 12444 12445 12446 12447 12448 12449 12450 12451 12452 12453 12454 12455 12456 12457 12458 12459 12460 12461 12462 12463 12464 12465 12466 12467 12468 12469 12470 12471 12472 12473 12474 12475 12476 12477 12478 12479 12480 12481 12482 12483 12484 12485 12486 12487 12488 12489 12490 12491 12492 12493 12494 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513 12514 12515 12516 12517 12518 12519 12520 12521 12522 12523 12524 12525 12526 12527 12528 12529 12530 12531 12532 12533 12534 12535 12536 12537 12538 12539 12540 12541 12542 12543 12544 12545 12546 12547 12548 12549 12550 12551 12552 12553 12554 12555 12556 12557 12558 12559 12560 12561 12562 12563 12564 12565 12566 12567 12568 12569 12570 12571 12572 12573 12574 12575 12576 12577 12578 12579 12580 12581 12582 12583 12584 12585 12586 12587 12588 12589 12590 12591 12592 12593 12594 12595 12596 12597 12598 12599 12600 12601 12602 12603 12604 12605 12606 12607 12608 12609 12610 12611 12612 12613 12614 12615 12616 12617 12618 12619 12620 12621 12622 12623 12624 12625 12626 12627 12628 12629 12630 12631 12632 12633 12634 12635 12636 12637 12638 12639 12640 12641 12642 12643 12644 12645 12646 12647 12648 12649 12650 12651 12652 12653 12654 12655 12656 12657 12658 12659 12660 12661 12662 12663 12664 12665 12666 12667 12668 12669 12670 12671 12672 12673 12674 12675 12676 12677 12678 12679 12680 12681 12682 12683 12684 12685 12686 12687 12688 12689 12690 12691 12692 12693 12694 12695 12696 12697 12698 12699 12700 12701 12702 12703 12704 12705 12706 12707 12708 12709 12710 12711 12712 12713 12714 12715 12716 12717 12718 12719 12720 12721 12722 12723 12724 12725 12726 12727 12728 12729 12730 12731 12732 12733 12734 12735 12736 12737 12738 12739 12740 12741 12742 12743 12744 12745 12746 12747 12748 12749 12750 12751 12752 12753 12754 12755 12756 12757 12758 12759 12760 12761 12762 12763 12764 12765 12766 12767 12768 12769 12770 12771 12772 12773 12774 12775 12776 12777 12778 12779 12780 12781 12782 12783 12784 12785 12786 12787 12788 12789 12790 12791 12792 12793 12794 12795 12796 12797 12798 12799 12800 12801 12802 12803 12804 12805 12806 12807 12808 12809 12810 12811 12812 12813 12814 12815 12816 12817 12818 12819 12820 12821 12822 12823 12824 12825 12826 12827 12828 12829 12830 12831 12832 12833 12834 12835 12836 12837 12838 12839 12840 12841 12842 12843 12844 12845 12846 12847 12848 12849 12850 12851 12852 12853 12854 12855 12856 12857 12858 12859 12860 12861 12862 12863 12864 12865 12866 12867 12868 12869 12870 12871 12872 12873 12874 12875 12876 12877 12878 12879 12880 12881 12882 12883 12884 12885 12886 12887 12888 12889 12890 12891 12892 12893 12894 12895 12896 12897 12898 12899 12900 12901 12902 12903 12904 12905 12906 12907 12908 12909 12910 12911 12912 12913 12914 12915 12916 12917 12918 12919 12920 12921 12922 12923 12924 12925 12926 12927 12928 12929 12930 12931 12932 12933 12934 12935 12936 12937 12938 12939 12940 12941 12942 12943 12944 12945 12946 12947 12948 12949 12950 12951 12952 12953 12954 12955 12956 12957 12958 12959 12960 12961 12962 12963 12964 12965 12966 12967 12968 12969 12970 12971 12972 12973 12974 12975 12976 12977 12978 12979 12980 12981 12982 12983 12984 12985 12986 12987 12988 12989 12990 12991 12992 12993 12994 12995 12996 12997 12998 12999 13000 13001 13002 13003 13004 13005 13006 13007 13008 13009 13010 13011 13012 13013 13014 13015 13016 13017 13018 13019 13020 13021 13022 13023 13024 13025 13026 13027 13028 13029 13030 13031 13032 13033 13034 13035 13036 13037 13038 13039 13040 13041 13042 13043 13044 13045 13046 13047 13048 13049 13050 13051 13052 13053 13054 13055 13056 13057 13058 13059 13060 13061 13062 13063 13064 13065 13066 13067 13068 13069 13070 13071 13072 13073 13074 13075 13076 13077 13078 13079 13080 13081 13082 13083 13084 13085 13086 13087 13088 13089 13090 13091 13092 13093 13094 13095 13096 13097 13098 13099 13100 13101 13102 13103 13104 13105 13106 13107 13108 13109 13110 13111 13112 13113 13114 13115 13116 13117 13118 13119 13120 13121 13122 13123 13124 13125 13126 13127 13128 13129 13130 13131 13132 13133 13134 13135 13136 13137 13138 13139 13140 13141 13142 13143 13144 13145 13146 13147 13148 13149 13150 13151 13152 13153 13154 13155 13156 13157 13158 13159 13160 13161 13162 13163 13164 13165 13166 13167 13168 13169 13170 13171 13172 13173 13174 13175 13176 13177 13178 13179 13180 13181 13182 13183 13184 13185 13186 13187 13188 13189 13190 13191 13192 13193 13194 13195 13196 13197 13198 13199 13200 13201 13202 13203 13204 13205 13206 13207 13208 13209 13210 13211 13212 13213 13214 13215 13216 13217 13218 13219 13220 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238 13239 13240 13241 13242 13243 13244 13245 13246 13247 13248 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264 13265 13266 13267 13268 13269 13270 13271 13272 13273 13274 13275 13276 13277 13278 13279 13280 13281 13282 13283 13284 13285 13286 13287 13288 13289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 13344 13345 13346 13347 13348 13349 13350 13351 13352 13353 13354 13355 13356 13357 13358 13359 13360 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13391 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13424 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 13490 13491 13492 13493 13494 13495 13496 13497 13498 13499 13500 13501 13502 13503 13504 13505 13506 13507 13508 13509 13510 13511 13512 13513 13514 13515 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13551 13552 13553 13554 13555 13556 13557 13558 13559 13560 13561 13562 13563 13564 13565 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 13598 13599 13600 13601 13602 13603 13604 13605 13606 13607 13608 13609 13610 13611 13612 13613 13614 13615 13616 13617 13618 13619 13620 13621 13622 13623 13624 13625 13626 13627 13628 13629 13630 13631 13632 13633 13634 13635 13636 13637 13638 13639 13640 13641 13642 13643 13644 13645 13646 13647 13648 13649 13650 13651 13652 13653 13654 13655 13656 13657 13658 13659 13660 13661 13662 13663 13664 13665 13666 13667 13668 13669 13670 13671 13672 13673 13674 13675 13676 13677 13678 13679 13680 13681 13682 13683 13684 13685 13686 13687 13688 13689 13690 13691 13692 13693 13694 13695 13696 13697 13698 13699 13700 13701 13702 13703 13704 13705 13706 13707 13708 13709 13710 13711 13712 13713 13714 13715 13716 13717 13718 13719 13720 13721 13722 13723 13724 13725 13726 13727 13728 13729 13730 13731 13732 13733 13734 13735 13736 13737 13738 13739 13740 13741 13742 13743 13744 13745 13746 13747 13748 13749 13750 13751 13752 13753 13754 13755 13756 13757 13758 13759 13760 13761 13762 13763 13764 13765 13766 13767 13768 13769 13770 13771 13772 13773 13774 13775 13776 13777 13778 13779 13780 13781 13782 13783 13784 13785 13786 13787 13788 13789 13790 13791 13792 13793 13794 13795 13796 13797 13798 13799 13800 13801 13802 13803 13804 13805 13806 13807 13808 13809 13810 13811 13812 13813 13814 13815 13816 13817 13818 13819 13820 13821 13822 13823 13824 13825 13826 13827 13828 13829 13830 13831 13832 13833 13834 13835 13836 13837 13838 13839 13840 13841 13842 13843 13844 13845 13846 13847 13848 13849 13850 13851 13852 13853 13854 13855 13856 13857 13858 13859 13860 13861 13862 13863 13864 13865 13866 13867 13868 13869 13870 13871 13872 13873 13874 13875 13876 13877 13878 13879 13880 13881 13882 13883 13884 13885 13886 13887 13888 13889 13890 13891 13892 13893 13894 13895 13896 13897 13898 13899 13900 13901 13902 13903 13904 13905 13906 13907 13908 13909 13910 13911 13912 13913 13914 13915 13916 13917 13918 13919 13920 13921 13922 13923 13924 13925 13926 13927 13928 13929 13930 13931 13932 13933 13934 13935 13936 13937 13938 13939 13940 13941 13942 13943 13944 13945 13946 13947 13948 13949 13950 13951 13952 13953 13954 13955 13956 13957 13958 13959 13960 13961 13962 13963 13964 13965 13966 13967 13968 13969 13970 13971 13972 13973 13974 13975 13976 13977 13978 13979 13980 13981 13982 13983 13984 13985 13986 13987 13988 13989 13990 13991 13992 13993 13994 13995 13996 13997 13998 13999 14000 14001 14002 14003 14004 14005 14006 14007 14008 14009 14010 14011 14012 14013 14014 14015 14016 14017 14018 14019 14020 14021 14022 14023 14024 14025 14026 14027 14028 14029 14030 14031 14032 14033 14034 14035 14036 14037 14038 14039 14040 14041 14042 14043 14044 14045 14046 14047 14048 14049 14050 14051 14052 14053 14054 14055 14056 14057 14058 14059 14060 14061 14062 14063 14064 14065 14066 14067 14068 14069 14070 14071 14072 14073 14074 14075 14076 14077 14078 14079 14080 14081 14082 14083 14084 14085 14086 14087 14088 14089 14090 14091 14092 14093 14094 14095 14096 14097 14098 14099 14100 14101 14102 14103 14104 14105 14106 14107 14108 14109 14110 14111 14112 14113 14114 14115 14116 14117 14118 14119 14120 14121 14122 14123 14124 14125 14126 14127 14128 14129 14130 14131 14132 14133 14134 14135 14136 14137 14138 14139 14140 14141 14142 14143 14144 14145 14146 14147 14148 14149 14150 14151 14152 14153 14154 14155 14156 14157 14158 14159 14160 14161 14162 14163 14164 14165 14166 14167 14168 14169 14170 14171 14172 14173 14174 14175 14176 14177 14178 14179 14180 14181 14182 14183 14184 14185 14186 14187 14188 14189 14190 14191 14192 14193 14194 14195 14196 14197 14198 14199 14200 14201 14202 14203 14204 14205 14206 14207 14208 14209 14210 14211 14212 14213 14214 14215 14216 14217 14218 14219 14220 14221 14222 14223 14224 14225 14226 14227 14228 14229 14230 14231 14232 14233 14234 14235 14236 14237 14238 14239 14240 14241 14242 14243 14244 14245 14246 14247 14248 14249 14250 14251 14252 14253 14254 14255 14256 14257 14258 14259 14260 14261 14262 14263 14264 14265 14266 14267 14268 14269 14270 14271 14272 14273 14274 14275 14276 14277 14278 14279 14280 14281 14282 14283 14284 14285 14286 14287 14288 14289 14290 14291 14292 14293 14294 14295 14296 14297 14298 14299 14300 14301 14302 14303 14304 14305 14306 14307 14308 14309 14310 14311 14312 14313 14314 14315 14316 14317 14318 14319 14320 14321 14322 14323 14324 14325 14326 14327 14328 14329 14330 14331 14332 14333 14334 14335 14336 14337 14338 14339 14340 14341 14342 14343 14344 14345 14346 14347 14348 14349 14350 14351 14352 14353 14354 14355 14356 14357 14358 14359 14360 14361 14362 14363 14364 14365 14366 14367 14368 14369 14370 14371 14372 14373 14374 14375 14376 14377 14378 14379 14380 14381 14382 14383 14384 14385 14386 14387 14388 14389 14390 14391 14392 14393 14394 14395 14396 14397 14398 14399 14400 14401 14402 14403 14404 14405 14406 14407 14408 14409 14410 14411 14412 14413 14414 14415 14416 14417 14418 14419 14420 14421 14422 14423 14424 14425 14426 14427 14428 14429 14430 14431 14432 14433 14434 14435 14436 14437 14438 14439 14440 14441 14442 14443 14444 14445 14446 14447 14448 14449 14450 14451 14452 14453 14454 14455 14456 14457 14458 14459 14460 14461 14462 14463 14464 14465 14466 14467 14468 14469 14470 14471 14472 14473 14474 14475 14476 14477 14478 14479 14480 14481 14482 14483 14484 14485 14486 14487 14488 14489 14490 14491 14492 14493 14494 14495 14496 14497 14498 14499 14500 14501 14502 14503 14504 14505 14506 14507 14508 14509 14510 14511 14512 14513 14514 14515 14516 14517 14518 14519 14520 14521 14522 14523 14524 14525 14526 14527 14528 14529 14530 14531 14532 14533 14534 14535 14536 14537 14538 14539 14540 14541 14542 14543 14544 14545 14546 14547 14548 14549 14550 14551 14552 14553 14554 14555 14556 14557 14558 14559 14560 14561 14562 14563 14564 14565 14566 14567 14568 14569 14570 14571 14572 14573 14574 14575 14576 14577 14578 14579 14580 14581 14582 14583 14584 14585 14586 14587 14588 14589 14590 14591 14592 14593 14594 14595 14596 14597 14598 14599 14600 14601 14602 14603 14604 14605 14606 14607 14608 14609 14610 14611 14612 14613 14614 14615 14616 14617 14618 14619 14620 14621 14622 14623 14624 14625 14626 14627 14628 14629 14630 14631 14632 14633 14634 14635 14636 14637 14638 14639 14640 14641 14642 14643 14644 14645 14646 14647 14648 14649 14650 14651 14652 14653 14654 14655 14656 14657 14658 14659 14660 14661 14662 14663 14664 14665 14666 14667 14668 14669 14670 14671 14672 14673 14674 14675 14676 14677 14678 14679 14680 14681 14682 14683 14684 14685 14686 14687 14688 14689 14690 14691 14692 14693 14694 14695 14696 14697 14698 14699 14700 14701 14702 14703 14704 14705 14706 14707 14708 14709 14710 14711 14712 14713 14714 14715 14716 14717 14718 14719 14720 14721 14722 14723 14724 14725 14726 14727 14728 14729 14730 14731 14732 14733 14734 14735 14736 14737 14738 14739 14740 14741 14742 14743 14744 14745 14746 14747 14748 14749 14750 14751 14752 14753 14754 14755 14756 14757 14758 14759 14760 14761 14762 14763 14764 14765 14766 14767 14768 14769 14770 14771 14772 14773 14774 14775 14776 14777 14778 14779 14780 14781 14782 14783 14784 14785 14786 14787 14788 14789 14790 14791 14792 14793 14794 14795 14796 14797 14798 14799 14800 14801 14802 14803 14804 14805 14806 14807 14808 14809 14810 14811 14812 14813 14814 14815 14816 14817 14818 14819 14820 14821 14822 14823 14824 14825 14826 14827 14828 14829 14830 14831 14832 14833 14834 14835 14836 14837 14838 14839 14840 14841 14842 14843 14844 14845 14846 14847 14848 14849 14850 14851 14852 14853 14854 14855 14856 14857 14858 14859 14860 14861 14862 14863 14864 14865 14866 14867 14868 14869 14870 14871 14872 14873 14874 14875 14876 14877 14878 14879 14880 14881 14882 14883 14884 14885 14886 14887 14888 14889 14890 14891 14892 14893 14894 14895 14896 14897 14898 14899 14900 14901 14902 14903 14904 14905 14906 14907 14908 14909 14910 14911 14912 14913 14914 14915 14916 14917 14918 14919 14920 14921 14922 14923 14924 14925 14926 14927 14928 14929 14930 14931 14932 14933 14934 14935 14936 14937 14938 14939 14940 14941 14942 14943 14944 14945 14946 14947 14948 14949 14950 14951 14952 14953 14954 14955 14956 14957 14958 14959 14960 14961 14962 14963 14964 14965 14966 14967 14968 14969 14970 14971 14972 14973 14974 14975 14976 14977 14978 14979 14980 14981 14982 14983 14984 14985 14986 14987 14988 14989 14990 14991 14992 14993 14994 14995 14996 14997 14998 14999 15000 15001 15002 15003 15004 15005 15006 15007 15008 15009 15010 15011 15012 15013 15014 15015 15016 15017 15018 15019 15020 15021 15022 15023 15024 15025 15026 15027 15028 15029 15030 15031 15032 15033 15034 15035 15036 15037 15038 15039 15040 15041 15042 15043 15044 15045 15046 15047 15048 15049 15050 15051 15052 15053 15054 15055 15056 15057 15058 15059 15060 15061 15062 15063 15064 15065 15066 15067 15068 15069 15070 15071 15072 15073 15074 15075 15076 15077 15078 15079 15080 15081 15082 15083 15084 15085 15086 15087 15088 15089 15090 15091 15092 15093 15094 15095 15096 15097 15098 15099 15100 15101 15102 15103 15104 15105 15106 15107 15108 15109 15110 15111 15112 15113 15114 15115 15116 15117 15118 15119 15120 15121 15122 15123 15124 15125 15126 15127 15128 15129 15130 15131 15132 15133 15134 15135 15136 15137 15138 15139 15140 15141 15142 15143 15144 15145 15146 15147 15148 15149 15150 15151 15152 15153 15154 15155 15156 15157 15158 15159 15160 15161 15162 15163 15164 15165 15166 15167 15168 15169 15170 15171 15172 15173 15174 15175 15176 15177 15178 15179 15180 15181 15182 15183 15184 15185 15186 15187 15188 15189 15190 15191 15192 15193 15194 15195 15196 15197 15198 15199 15200 15201 15202 15203 15204 15205 15206 15207 15208 15209 15210 15211 15212 15213 15214 15215 15216 15217 15218 15219 15220 15221 15222 15223 15224 15225 15226 15227 15228 15229 15230 15231 15232 15233 15234 15235 15236 15237 15238 15239 15240 15241 15242 15243 15244 15245 15246 15247 15248 15249 15250 15251 15252 15253 15254 15255 15256 15257 15258 15259 15260 15261 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 15284 15285 15286 15287 15288 15289 15290 15291 15292 15293 15294 15295 15296 15297 15298 15299 15300 15301 15302 15303 15304 15305 15306 15307 15308 15309 15310 15311 15312 15313 15314 15315 15316 15317 15318 15319 15320 15321 15322 15323 15324 15325 15326 15327 15328 15329 15330 15331 15332 15333 15334 15335 15336 15337 15338 15339 15340 15341 15342 15343 15344 15345 15346 15347 15348 15349 15350 15351 15352 15353 15354 15355 15356 15357 15358 15359 15360 15361 15362 15363 15364 15365 15366 15367 15368 15369 15370 15371 15372 15373 15374 15375 15376 15377 15378 15379 15380 15381 15382 15383 15384 15385 15386 15387 15388 15389 15390 15391 15392 15393 15394 15395 15396 15397 15398 15399 15400 15401 15402 15403 15404 15405 15406 15407 15408 15409 15410 15411 15412 15413 15414 15415 15416 15417 15418 15419 15420 15421 15422 15423 15424 15425 15426 15427 15428 15429 15430 15431 15432 15433 15434 15435 15436 15437 15438 15439 15440 15441 15442 15443 15444 15445 15446 15447 15448 15449 15450 15451 15452 15453 15454 15455 15456 15457 15458 15459 15460 15461 15462 15463 15464 15465 15466 15467 15468 15469 15470 15471 15472 15473 15474 15475 15476 15477 15478 15479 15480 15481 15482 15483 15484 15485 15486 15487 15488 15489 15490 15491 15492 15493 15494 15495 15496 15497 15498 15499 15500 15501 15502 15503 15504 15505 15506 15507 15508 15509 15510 15511 15512 15513 15514 15515 15516 15517 15518 15519 15520 15521 15522 15523 15524 15525 15526 15527 15528 15529 15530 15531 15532 15533 15534 15535 15536 15537 15538 15539 15540 15541 15542 15543 15544 15545 15546 15547 15548 15549 15550 15551 15552 15553 15554 15555 15556 15557 15558 15559 15560 15561 15562 15563 15564 15565 15566 15567 15568 15569 15570 15571 15572 15573 15574 15575 15576 15577 15578 15579 15580 15581 15582 15583 15584 15585 15586 15587 15588 15589 15590 15591 15592 15593 15594 15595 15596 15597 15598 15599 15600 15601 15602 15603 15604 15605 15606 15607 15608 15609 15610 15611 15612 15613 15614 15615 15616 15617 15618 15619 15620 15621 15622 15623 15624 15625 15626 15627 15628 15629 15630 15631 15632 15633 15634 15635 15636 15637 15638 15639 15640 15641 15642 15643 15644 15645 15646 15647 15648 15649 15650 15651 15652 15653 15654 15655 15656 15657 15658 15659 15660 15661 15662 15663 15664 15665 15666 15667 15668 15669 15670 15671 15672 15673 15674 15675 15676 15677 15678 15679 15680 15681 15682 15683 15684 15685 15686 15687 15688 15689 15690 15691 15692 15693 15694 15695 15696 15697 15698 15699 15700 15701 15702 15703 15704 15705 15706 15707 15708 15709 15710 15711 15712 15713 15714 15715 15716 15717 15718 15719 15720 15721 15722 15723 15724 15725 15726 15727 15728 15729 15730 15731 15732 15733 15734 15735 15736 15737 15738 15739 15740 15741 15742 15743 15744 15745 15746 15747 15748 15749 15750 15751 15752 15753 15754 15755 15756 15757 15758 15759 15760 15761 15762 15763 15764 15765 15766 15767 15768 15769 15770 15771 15772 15773 15774 15775 15776 15777 15778 15779 15780 15781 15782 15783 15784 15785 15786 15787 15788 15789 15790 15791 15792 15793 15794 15795 15796 15797 15798 15799 15800 15801 15802 15803 15804 15805 15806 15807 15808 15809 15810 15811 15812 15813 15814 15815 15816 15817 15818 15819 15820 15821 15822 15823 15824 15825 15826 15827 15828 15829 15830 15831 15832 15833 15834 15835 15836 15837 15838 15839 15840 15841 15842 15843 15844 15845 15846 15847 15848 15849 15850 15851 15852 15853 15854 15855 15856 15857 15858 15859 15860 15861 15862 15863 15864 15865 15866 15867 15868 15869 15870 15871 15872 15873 15874 15875 15876 15877 15878 15879 15880 15881 15882 15883 15884 15885 15886 15887 15888 15889 15890 15891 15892 15893 15894 15895 15896 15897 15898 15899 15900 15901 15902 15903 15904 15905 15906 15907 15908 15909 15910 15911 15912 15913 15914 15915 15916 15917 15918 15919 15920 15921 15922 15923 15924 15925 15926 15927 15928 15929 15930 15931 15932 15933 15934 15935 15936 15937 15938 15939 15940 15941 15942 15943 15944 15945 15946 15947 15948 15949 15950 15951 15952 15953 15954 15955 15956 15957 15958 15959 15960 15961 15962 15963 15964 15965 15966 15967 15968 15969 15970 15971 15972 15973 15974 15975 15976 15977 15978 15979 15980 15981 15982 15983 15984 15985 15986 15987 15988 15989 15990 15991 15992 15993 15994 15995 15996 15997 15998 15999 16000 16001 16002 16003 16004 16005 16006 16007 16008 16009 16010 16011 16012 16013 16014 16015 16016 16017 16018 16019 16020 16021 16022 16023 16024 16025 16026 16027 16028 16029 16030 16031 16032 16033 16034 16035 16036 16037 16038 16039 16040 16041 16042 16043 16044 16045 16046 16047 16048 16049 16050 16051 16052 16053 16054 16055 16056 16057 16058 16059 16060 16061 16062 16063 16064 16065 16066 16067 16068 16069 16070 16071 16072 16073 16074 16075 16076 16077 16078 16079 16080 16081 16082 16083 16084 16085 16086 16087 16088 16089 16090 16091 16092 16093 16094 16095 16096 16097 16098 16099 16100 16101 16102 16103 16104 16105 16106 16107 16108 16109 16110 16111 16112 16113 16114 16115 16116 16117 16118 16119 16120 16121 16122 16123 16124 16125 16126 16127 16128 16129 16130 16131 16132 16133 16134 16135 16136 16137 16138 16139 16140 16141 16142 16143 16144 16145 16146 16147 16148 16149 16150 16151 16152 16153 16154 16155 16156 16157 16158 16159 16160 16161 16162 16163 16164 16165 16166 16167 16168 16169 16170 16171 16172 16173 16174 16175 16176 16177 16178 16179 16180 16181 16182 16183 16184 16185 16186 16187 16188 16189 16190 16191 16192 16193 16194 16195 16196 16197 16198 16199 16200 16201 16202 16203 16204 16205 16206 16207 16208 16209 16210 16211 16212 16213 16214 16215 16216 16217 16218 16219 16220 16221 16222 16223 16224 16225 16226 16227 16228 16229 16230 16231 16232 16233 16234 16235 16236 16237 16238 16239 16240 16241 16242 16243 16244 16245 16246 16247 16248 16249 16250 16251 16252 16253 16254 16255 16256 16257 16258 16259 16260 16261 16262 16263 16264 16265 16266 16267 16268 16269 16270 16271 16272 16273 16274 16275 16276 16277 16278 16279 16280 16281 16282 16283 16284 16285 16286 16287 16288 16289 16290 16291 16292 16293 16294 16295 16296 16297 16298 16299 16300 16301 16302 16303 16304 16305 16306 16307 16308 16309 16310 16311 16312 16313 16314 16315 16316 16317 16318 16319 16320 16321 16322 16323 16324 16325 16326 16327 16328 16329 16330 16331 16332 16333 16334 16335 16336 16337 16338 16339 16340 16341 16342 16343 16344 16345 16346 16347 16348 16349 16350 16351 16352 16353 16354 16355 16356 16357 16358 16359 16360 16361 16362 16363 16364 16365 16366 16367 16368 16369 16370 16371 16372 16373 16374 16375 16376 16377 16378 16379 16380 16381 16382 16383 16384 16385 16386 16387 16388 16389 16390 16391 16392 16393 16394 16395 16396 16397 16398 16399 16400 16401 16402 16403 16404 16405 16406 16407 16408 16409 16410 16411 16412 16413 16414 16415 16416 16417 16418 16419 16420 16421 16422 16423 16424 16425 16426 16427 16428 16429 16430 16431 16432 16433 16434 16435 16436 16437 16438 16439 16440 16441 16442 16443 16444 16445 16446 16447 16448 16449 16450 16451 16452 16453 16454 16455 16456 16457 16458 16459 16460 16461 16462 16463 16464 16465 16466 16467 16468 16469 16470 16471 16472 16473 16474 16475 16476 16477 16478 16479 16480 16481 16482 16483 16484 16485 16486 16487 16488 16489 16490 16491 16492 16493 16494 16495 16496 16497 16498 16499 16500 16501 16502 16503 16504 16505 16506 16507 16508 16509 16510 16511 16512 16513 16514 16515 16516 16517 16518 16519 16520 16521 16522 16523 16524 16525 16526 16527 16528 16529 16530 16531 16532 16533 16534 16535 16536 16537 16538 16539 16540 16541 16542 16543 16544 16545 16546 16547 16548 16549 16550 16551 16552 16553 16554 16555 16556 16557 16558 16559 16560 16561 16562 16563 16564 16565 16566 16567 16568 16569 16570 16571 16572 16573 16574 16575 16576 16577 16578 16579 16580 16581 16582 16583 16584 16585 16586 16587 16588 16589 16590 16591 16592 16593 16594 16595 16596 16597 16598 16599 16600 16601 16602 16603 16604 16605 16606 16607 16608 16609 16610 16611 16612 16613 16614 16615 16616 16617 16618 16619 16620 16621 16622 16623 16624 16625 16626 16627 16628 16629 16630 16631 16632 16633 16634 16635 16636 16637 16638 16639 16640 16641 16642 16643 16644 16645 16646 16647 16648 16649 16650 16651 16652 16653 16654 16655 16656 16657 16658 16659 16660 16661 16662 16663 16664 16665 16666 16667 16668 16669 16670 16671 16672 16673 16674 16675 16676 16677 16678 16679 16680 16681 16682 16683 16684 16685 16686 16687 16688 16689 16690 16691 16692 16693 16694 16695 16696 16697 16698 16699 16700 16701 16702 16703 16704 16705 16706 16707 16708 16709 16710 16711 16712 16713 16714 16715 16716 16717 16718 16719 16720 16721 16722 16723 16724 16725 16726 16727 16728 16729 16730 16731 16732 16733 16734 16735 16736 16737 16738 16739 16740 16741 16742 16743 16744 16745 16746 16747 16748 16749 16750 16751 16752 16753 16754 16755 16756 16757 16758 16759 16760 16761 16762 16763 16764 16765 16766 16767 16768 16769 16770 16771 16772 16773 16774 16775 16776 16777 16778 16779 16780 16781 16782 16783 16784 16785 16786 16787 16788 16789 16790 16791 16792 16793 16794 16795 16796 16797 16798 16799 16800 16801 16802 16803 16804 16805 16806 16807 16808 16809 16810 16811 16812 16813 16814 16815 16816 16817 16818 16819 16820 16821 16822 16823 16824 16825 16826 16827 16828 16829 16830 16831 16832 16833 16834 16835 16836 16837 16838 16839 16840 16841 16842 16843 16844 16845 16846 16847 16848 16849 16850 16851 16852 16853 16854 16855 16856 16857 16858 16859 16860 16861 16862 16863 16864 16865 16866 16867 16868 16869 16870 16871 16872 16873 16874 16875 16876 16877 16878 16879 16880 16881 16882 16883 16884 16885 16886 16887 16888 16889 16890 16891 16892 16893 16894 16895 16896 16897 16898 16899 16900 16901 16902 16903 16904 16905 16906 16907 16908 16909 16910 16911 16912 16913 16914 16915 16916 16917 16918 16919 16920 16921 16922 16923 16924 16925 16926 16927 16928 16929 16930 16931 16932 16933 16934 16935 16936 16937 16938 16939 16940 16941 16942 16943 16944 16945 16946 16947 16948 16949 16950 16951 16952 16953 16954 16955 16956 16957 16958 16959 16960 16961 16962 16963 16964 16965 16966 16967 16968 16969 16970 16971 16972 16973 16974 16975 16976 16977 16978 16979 16980 16981 16982 16983 16984 16985 16986 16987 16988 16989 16990 16991 16992 16993 16994 16995 16996 16997 16998 16999 17000 17001 17002 17003 17004 17005 17006 17007 17008 17009 17010 17011 17012 17013 17014 17015 17016 17017 17018 17019 17020 17021 17022 17023 17024 17025 17026 17027 17028 17029 17030 17031 17032 17033 17034 17035 17036 17037 17038 17039 17040 17041 17042 17043 17044 17045 17046 17047 17048 17049 17050 17051 17052 17053 17054 17055 17056 17057 17058 17059 17060 17061 17062 17063 17064 17065 17066 17067 17068 17069 17070 17071 17072 17073 17074 17075 17076 17077 17078 17079 17080 17081 17082 17083 17084 17085 17086 17087 17088 17089 17090 17091 17092 17093 17094 17095 17096 17097 17098 17099 17100 17101 17102 17103 17104 17105 17106 17107 17108 17109 17110 17111 17112 17113 17114 17115 17116 17117 17118 17119 17120 17121 17122 17123 17124 17125 17126 17127 17128 17129 17130 17131 17132 17133 17134 17135 17136 17137 17138 17139 17140 17141 17142 17143 17144 17145 17146 17147 17148 17149 17150 17151 17152 17153 17154 17155 17156 17157 17158 17159 17160 17161 17162 17163 17164 17165 17166 17167 17168 17169 17170 17171 17172 17173 17174 17175 17176 17177 17178 17179 17180 17181 17182 17183 17184 17185 17186 17187 17188 17189 17190 17191 17192 17193 17194 17195 17196 17197 17198 17199 17200 17201 17202 17203 17204 17205 17206 17207 17208 17209 17210 17211 17212 17213 17214 17215 17216 17217 17218 17219 17220 17221 17222 17223 17224 17225 17226 17227 17228 17229 17230 17231 17232 17233 17234 17235 17236 17237 17238 17239 17240 17241 17242 17243 17244 17245 17246 17247 17248 17249 17250 17251 17252 17253 17254 17255 17256 17257 17258 17259 17260 17261 17262 17263 17264 17265 17266 17267 17268 17269 17270 17271 17272 17273 17274 17275 17276 17277 17278 17279 17280 17281 17282 17283 17284 17285 17286 17287 17288 17289 17290 17291 17292 17293 17294 17295 17296 17297 17298 17299 17300 17301 17302 17303 17304 17305 17306 17307 17308 17309 17310 17311 17312 17313 17314 17315 17316 17317 17318 17319 17320 17321 17322 17323 17324 17325 17326 17327 17328 17329 17330 17331 17332 17333 17334 17335 17336 17337 17338 17339 17340 17341 17342 17343 17344 17345 17346 17347 17348 17349 17350 17351 17352 17353 17354 17355 17356 17357 17358 17359 17360 17361 17362 17363 17364 17365 17366 17367 17368 17369 17370 17371 17372 17373 17374 17375 17376 17377 17378 17379 17380 17381 17382 17383 17384 17385 17386 17387 17388 17389 17390 17391 17392 17393 17394 17395 17396 17397 17398 17399 17400 17401 17402 17403 17404 17405 17406 17407 17408 17409 17410 17411 17412 17413 17414 17415 17416 17417 17418 17419 17420 17421 17422 17423 17424 17425 17426 17427 17428 17429 17430 17431 17432 17433 17434 17435 17436 17437 17438 17439 17440 17441 17442 17443 17444 17445 17446 17447 17448 17449 17450 17451 17452 17453 17454 17455 17456 17457 17458 17459 17460 17461 17462 17463 17464 17465 17466 17467 17468 17469 17470 17471 17472 17473 17474 17475 17476 17477 17478 17479 17480 17481 17482 17483 17484 17485 17486 17487 17488 17489 17490 17491 17492 17493 17494 17495 17496 17497 17498 17499 17500 17501 17502 17503 17504 17505 17506 17507 17508 17509 17510 17511 17512 17513 17514 17515 17516 17517 17518 17519 17520 17521 17522 17523 17524 17525 17526 17527 17528 17529 17530 17531 17532 17533 17534 17535 17536 17537 17538 17539 17540 17541 17542 17543 17544 17545 17546 17547 17548 17549 17550 17551 17552 17553 17554 17555 17556 17557 17558 17559 17560 17561 17562 17563 17564 17565 17566 17567 17568 17569 17570 17571 17572 17573 17574 17575 17576 17577 17578 17579 17580 17581 17582 17583 17584 17585 17586 17587 17588 17589 17590 17591 17592 17593 17594 17595 17596 17597 17598 17599 17600 17601 17602 17603 17604 17605 17606 17607 17608 17609 17610 17611 17612 17613 17614 17615 17616 17617 17618 17619 17620 17621 17622 17623 17624 17625 17626 17627 17628 17629 17630 17631 17632 17633 17634 17635 17636 17637 17638 17639 17640 17641 17642 17643 17644 17645 17646 17647 17648 17649 17650 17651 17652 17653 17654 17655 17656 17657 17658 17659 17660 17661 17662 17663 17664 17665 17666 17667 17668 17669 17670 17671 17672 17673 17674 17675 17676 17677 17678 17679 17680 17681 17682 17683 17684 17685 17686 17687 17688 17689 17690 17691 17692 17693 17694 17695 17696 17697 17698 17699 17700 17701 17702 17703 17704 17705 17706 17707 17708 17709 17710 17711 17712 17713 17714 17715 17716 17717 17718 17719 17720 17721 17722 17723 17724 17725 17726 17727 17728 17729 17730 17731 17732 17733 17734 17735 17736 17737 17738 17739 17740 17741 17742 17743 17744 17745 17746 17747 17748 17749 17750 17751 17752 17753 17754 17755 17756 17757 17758 17759 17760 17761 17762 17763 17764 17765 17766 17767 17768 17769 17770 17771 17772 17773 17774 17775 17776 17777 17778 17779 17780 17781 17782 17783 17784 17785 17786 17787 17788 17789 17790 17791 17792 17793 17794 17795 17796 17797 17798 17799 17800 17801 17802 17803 17804 17805 17806 17807 17808 17809 17810 17811 17812 17813 17814 17815 17816 17817 17818 17819 17820 17821 17822 17823 17824 17825 17826 17827 17828 17829 17830 17831 17832 17833 17834 17835 17836 17837 17838 17839 17840 17841 17842 17843 17844 17845 17846 17847 17848 17849 17850 17851 17852 17853 17854 17855 17856 17857 17858 17859 17860 17861 17862 17863 17864 17865 17866 17867 17868 17869 17870 17871 17872 17873 17874 17875 17876 17877 17878 17879 17880 17881 17882 17883 17884 17885 17886 17887 17888 17889 17890 17891 17892 17893 17894 17895 17896 17897 17898 17899 17900 17901 17902 17903 17904 17905 17906 17907 17908 17909 17910 17911 17912 17913 17914 17915 17916 17917 17918 17919 17920 17921 17922 17923 17924 17925 17926 17927 17928 17929 17930 17931 17932 17933 17934 17935 17936 17937 17938 17939 17940 17941 17942 17943 17944 17945 17946 17947 17948 17949 17950 17951 17952 17953 17954 17955 17956 17957 17958 17959 17960 17961 17962 17963 17964 17965 17966 17967 17968 17969 17970 17971 17972 17973 17974 17975 17976 17977 17978 17979 17980 17981 17982 17983 17984 17985 17986 17987 17988 17989 17990 17991 17992 17993 17994 17995 17996 17997 17998 17999 18000 18001 18002 18003 18004 18005 18006 18007 18008 18009 18010 18011 18012 18013 18014 18015 18016 18017 18018 18019 18020 18021 18022 18023 18024 18025 18026 18027 18028 18029 18030 18031 18032 18033 18034 18035 18036 18037 18038 18039 18040 18041 18042 18043 18044 18045 18046 18047 18048 18049 18050 18051 18052 18053 18054 18055 18056 18057 18058 18059 18060 18061 18062 18063 18064 18065 18066 18067 18068 18069 18070 18071 18072 18073 18074 18075 18076 18077 18078 18079 18080 18081 18082 18083 18084 18085 18086 18087 18088 18089 18090 18091 18092 18093 18094 18095 18096 18097 18098 18099 18100 18101 18102 18103 18104 18105 18106 18107 18108 18109 18110 18111 18112 18113 18114 18115 18116 18117 18118 18119 18120 18121 18122 18123 18124 18125 18126 18127 18128 18129 18130 18131 18132 18133 18134 18135 18136 18137 18138 18139 18140 18141 18142 18143 18144 18145 18146 18147 18148 18149 18150 18151 18152 18153 18154 18155 18156 18157 18158 18159 18160 18161 18162 18163 18164 18165 18166 18167 18168 18169 18170 18171 18172 18173 18174 18175 18176 18177 18178 18179 18180 18181 18182 18183 18184 18185 18186 18187 18188 18189 18190 18191 18192 18193 18194 18195 18196 18197 18198 18199 18200 18201 18202 18203 18204 18205 18206 18207 18208 18209 18210 18211 18212 18213 18214 18215 18216 18217 18218 18219 18220 18221 18222 18223 18224 18225 18226 18227 18228 18229 18230 18231 18232 18233 18234 18235 18236 18237 18238 18239 18240 18241 18242 18243 18244 18245 18246 18247 18248 18249 18250 18251 18252 18253 18254 18255 18256 18257 18258 18259 18260 18261 18262 18263 18264 18265 18266 18267 18268 18269 18270 18271 18272 18273 18274 18275 18276 18277 18278 18279 18280 18281 18282 18283 18284 18285 18286 18287 18288 18289 18290 18291 18292 18293 18294 18295 18296 18297 18298 18299 18300 18301 18302 18303 18304 18305 18306 18307 18308 18309 18310 18311 18312 18313 18314 18315 18316 18317 18318 18319 18320 18321 18322 18323 18324 18325 18326 18327 18328 18329 18330 18331 18332 18333 18334 18335 18336 18337 18338 18339 18340 18341 18342 18343 18344 18345 18346 18347 18348 18349 18350 18351 18352 18353 18354 18355 18356 18357 18358 18359 18360 18361 18362 18363 18364 18365 18366 18367 18368 18369 18370 18371 18372 18373 18374 18375 18376 18377 18378 18379 18380 18381 18382 18383 18384 18385 18386 18387 18388 18389 18390 18391 18392 18393 18394 18395 18396 18397 18398 18399 18400 18401 18402 18403 18404 18405 18406 18407 18408 18409 18410 18411 18412 18413 18414 18415 18416 18417 18418 18419 18420 18421 18422 18423 18424 18425 18426 18427 18428 18429 18430 18431 18432 18433 18434 18435 18436 18437 18438 18439 18440 18441 18442 18443 18444 18445 18446 18447 18448 18449 18450 18451 18452 18453 18454 18455 18456 18457 18458 18459 18460 18461 18462 18463 18464 18465 18466 18467 18468 18469 18470 18471 18472 18473 18474 18475 18476 18477 18478 18479 18480 18481 18482 18483 18484 18485 18486 18487 18488 18489 18490 18491 18492 18493 18494 18495 18496 18497 18498 18499 18500 18501 18502 18503 18504 18505 18506 18507 18508 18509 18510 18511 18512 18513 18514 18515 18516 18517 18518 18519 18520 18521 18522 18523 18524 18525 18526 18527 18528 18529 18530 18531 18532 18533 18534 18535 18536 18537 18538 18539 18540 18541 18542 18543 18544 18545 18546 18547 18548 18549 18550 18551 18552 18553 18554 18555 18556 18557 18558 18559 18560 18561 18562 18563 18564 18565 18566 18567 18568 18569 18570 18571 18572 18573 18574 18575 18576 18577 18578 18579 18580 18581 18582 18583 18584 18585 18586 18587 18588 18589 18590 18591 18592 18593 18594 18595 18596 18597 18598 18599 18600 18601 18602 18603 18604 18605 18606 18607 18608 18609 18610 18611 18612 18613 18614 18615 18616 18617 18618 18619 18620 18621 18622 18623 18624 18625 18626 18627 18628 18629 18630 18631 18632 18633 18634 18635 18636 18637 18638 18639 18640 18641 18642 18643 18644 18645 18646 18647 18648 18649 18650 18651 18652 18653 18654 18655 18656 18657 18658 18659 18660 18661 18662 18663 18664 18665 18666 18667 18668 18669 18670 18671 18672 18673 18674 18675 18676 18677 18678 18679 18680 18681 18682 18683 18684 18685 18686 18687 18688 18689 18690 18691 18692 18693 18694 18695 18696 18697 18698 18699 18700 18701 18702 18703 18704 18705 18706 18707 18708 18709 18710 18711 18712 18713 18714 18715 18716 18717 18718 18719 18720 18721 18722 18723 18724 18725 18726 18727 18728 18729 18730 18731 18732 18733 18734 18735 18736 18737 18738 18739 18740 18741 18742 18743 18744 18745 18746 18747 18748 18749 18750 18751 18752 18753 18754 18755 18756 18757 18758 18759 18760 18761 18762 18763 18764 18765 18766 18767 18768 18769 18770 18771 18772 18773 18774 18775 18776 18777 18778 18779 18780 18781 18782 18783 18784 18785 18786 18787 18788 18789 18790 18791 18792 18793 18794 18795 18796 18797 18798 18799 18800 18801 18802 18803 18804 18805 18806 18807 18808 18809 18810 18811 18812 18813 18814 18815 18816 18817 18818 18819 18820 18821 18822 18823 18824 18825 18826 18827 18828 18829 18830 18831 18832 18833 18834 18835 18836 18837 18838 18839 18840 18841 18842 18843 18844 18845 18846 18847 18848 18849 18850 18851 18852 18853 18854 18855 18856 18857 18858 18859 18860 18861 18862 18863 18864 18865 18866 18867 18868 18869 18870 18871 18872 18873 18874 18875 18876 18877 18878 18879 18880 18881 18882 18883 18884 18885 18886 18887 18888 18889 18890 18891 18892 18893 18894 18895 18896 18897 18898 18899 18900 18901 18902 18903 18904 18905 18906 18907 18908 18909 18910 18911 18912 18913 18914 18915 18916 18917 18918 18919 18920 18921 18922 18923 18924 18925 18926 18927 18928 18929 18930 18931 18932 18933 18934 18935 18936 18937 18938 18939 18940 18941 18942 18943 18944 18945 18946 18947 18948 18949 18950 18951 18952 18953 18954 18955 18956 18957 18958 18959 18960 18961 18962 18963 18964 18965 18966 18967 18968 18969 18970 18971 18972 18973 18974 18975 18976 18977 18978 18979 18980 18981 18982 18983 18984 18985 18986 18987 18988 18989 18990 18991 18992 18993 18994 18995 18996 18997 18998 18999 19000 19001 19002 19003 19004 19005 19006 19007 19008 19009 19010 19011 19012 19013 19014 19015 19016 19017 19018 19019 19020 19021 19022 19023 19024 19025 19026 19027 19028 19029 19030 19031 19032 19033 19034 19035 19036 19037 19038 19039 19040 19041 19042 19043 19044 19045 19046 19047 19048 19049 19050 19051 19052 19053 19054 19055 19056 19057 19058 19059 19060 19061 19062 19063 19064 19065 19066 19067 19068 19069 19070 19071 19072 19073 19074 19075 19076 19077 19078 19079 19080 19081 19082 19083 19084 19085 19086 19087 19088 19089 19090 19091 19092 19093 19094 19095 19096 19097 19098 19099 19100 19101 19102 19103 19104 19105 19106 19107 19108 19109 19110 19111 19112 19113 19114 19115 19116 19117 19118 19119 19120 19121 19122 19123 19124 19125 19126 19127 19128 19129 19130 19131 19132 19133 19134 19135 19136 19137 19138 19139 19140 19141 19142 19143 19144 19145 19146 19147 19148 19149 19150 19151 19152 19153 19154 19155 19156 19157 19158 19159 19160 19161 19162 19163 19164 19165 19166 19167 19168 19169 19170 19171 19172 19173 19174 19175 19176 19177 19178 19179 19180 19181 19182 19183 19184 19185 19186 19187 19188 19189 19190 19191 19192 19193 19194 19195 19196 19197 19198 19199 19200 19201 19202 19203 19204 19205 19206 19207 19208 19209 19210 19211 19212 19213 19214 19215 19216 19217 19218 19219 19220 19221 19222 19223 19224 19225 19226 19227 19228 19229 19230 19231 19232 19233 19234 19235 19236 19237 19238 19239 19240 19241 19242 19243 19244 19245 19246 19247 19248 19249 19250 19251 19252 19253 19254 19255 19256 19257 19258 19259 19260 19261 19262 19263 19264 19265 19266 19267 19268 19269 19270 19271 19272 19273 19274 19275 19276 19277 19278 19279 19280 19281 19282 19283 19284 19285 19286 19287 19288 19289 19290 19291 19292 19293 19294 19295 19296 19297 19298 19299 19300 19301 19302 19303 19304 19305 19306 19307 19308 19309 19310 19311 19312 19313 19314 19315 19316 19317 19318 19319 19320 19321 19322 19323 19324 19325 19326 19327 19328 19329 19330 19331 19332 19333 19334 19335 19336 19337 19338 19339 19340 19341 19342 19343 19344 19345 19346 19347 19348 19349 19350 19351 19352 19353 19354 19355 19356 19357 19358 19359 19360 19361 19362 19363 19364 19365 19366 19367 19368 19369 19370 19371 19372 19373 19374 19375 19376 19377 19378 19379 19380 19381 19382 19383 19384 19385 19386 19387 19388 19389 19390 19391 19392 19393 19394 19395 19396 19397 19398 19399 19400 19401 19402 19403 19404 19405 19406 19407 19408 19409 19410 19411 19412 19413 19414 19415 19416 19417 19418 19419 19420 19421 19422 19423 19424 19425 19426 19427 19428 19429 19430 19431 19432 19433 19434 19435 19436 19437 19438 19439 19440 19441 19442 19443 19444 19445 19446 19447 19448 19449 19450 19451 19452 19453 19454 19455 19456 19457 19458 19459 19460 19461 19462 19463 19464 19465 19466 19467 19468 19469 19470 19471 19472 19473 19474 19475 19476 19477 19478 19479 19480 19481 19482 19483 19484 19485 19486 19487 19488 19489 19490 19491 19492 19493 19494 19495 19496 19497 19498 19499 19500 19501 19502 19503 19504 19505 19506 19507 19508 19509 19510 19511 19512 19513 19514 19515 19516 19517 19518 19519 19520 19521 19522 19523 19524 19525 19526 19527 19528 19529 19530 19531 19532 19533 19534 19535 19536 19537 19538 19539 19540 19541 19542 19543 19544 19545 19546 19547 19548 19549 19550 19551 19552 19553 19554 19555 19556 19557 19558 19559 19560 19561 19562 19563 19564 19565 19566 19567 19568 19569 19570 19571 19572 19573 19574 19575 19576 19577 19578 19579 19580 19581 19582 19583 19584 19585 19586 19587 19588 19589 19590 19591 19592 19593 19594 19595 19596 19597 19598 19599 19600 19601 19602 19603 19604 19605 19606 19607 19608 19609 19610 19611 19612 19613 19614 19615 19616 19617 19618 19619 19620 19621 19622 19623 19624 19625 19626 19627 19628 19629 19630 19631 19632 19633 19634 19635 19636 19637 19638 19639 19640 19641 19642 19643 19644 19645 19646 19647 19648 19649 19650 19651 19652 19653 19654 19655 19656 19657 19658 19659 19660 19661 19662 19663 19664 19665 19666 19667 19668 19669 19670 19671 19672 19673 19674 19675 19676 19677 19678 19679 19680 19681 19682 19683 19684 19685 19686 19687 19688 19689 19690 19691 19692 19693 19694 19695 19696 19697 19698 19699 19700 19701 19702 19703 19704 19705 19706 19707 19708 19709 19710 19711 19712 19713 19714 19715 19716 19717 19718 19719 19720 19721 19722 19723 19724 19725 19726 19727 19728 19729 19730 19731 19732 19733 19734 19735 19736 19737 19738 19739 19740 19741 19742 19743 19744 19745 19746 19747 19748 19749 19750 19751 19752 19753 19754 19755 19756 19757 19758 19759 19760 19761 19762 19763 19764 19765 19766 19767 19768 19769 19770 19771 19772 19773 19774 19775 19776 19777 19778 19779 19780 19781 19782 19783 19784 19785 19786 19787 19788 19789 19790 19791 19792 19793 19794 19795 19796 19797 19798 19799 19800 19801 19802 19803 19804 19805 19806 19807 19808 19809 19810 19811 19812 19813 19814 19815 19816 19817 19818 19819 19820 19821 19822 19823 19824 19825 19826 19827 19828 19829 19830 19831 19832 19833 19834 19835 19836 19837 19838 19839 19840 19841 19842 19843 19844 19845 19846 19847 19848 19849 19850 19851 19852 19853 19854 19855 19856 19857 19858 19859 19860 19861 19862 19863 19864 19865 19866 19867 19868 19869 19870 19871 19872 19873 19874 19875 19876 19877 19878 19879 19880 19881 19882 19883 19884 19885 19886 19887 19888 19889 19890 19891 19892 19893 19894 19895 19896 19897 19898 19899 19900 19901 19902 19903 19904 19905 19906 19907 19908 19909 19910 19911 19912 19913 19914 19915 19916 19917 19918 19919 19920 19921 19922 19923 19924 19925 19926 19927 19928 19929 19930 19931 19932 19933 19934 19935 19936 19937 19938 19939 19940 19941 19942 19943 19944 19945 19946 19947 19948 19949 19950 19951 19952 19953 19954 19955 19956 19957 19958 19959 19960 19961 19962 19963 19964 19965 19966 19967 19968 19969 19970 19971 19972 19973 19974 19975 19976 19977 19978 19979 19980 19981 19982 19983 19984 19985 19986 19987 19988 19989 19990 19991 19992 19993 19994 19995 19996 19997 19998 19999 20000 20001 20002 20003 20004 20005 20006 20007 20008 20009 20010 20011 20012 20013 20014 20015 20016 20017 20018 20019 20020 20021 20022 20023 20024 20025 20026 20027 20028 20029 20030 20031 20032 20033 20034 20035 20036 20037 20038 20039 20040 20041 20042 20043 20044 20045 20046 20047 20048 20049 20050 20051 20052 20053 20054 20055 20056 20057 20058 20059 20060 20061 20062 20063 20064 20065 20066 20067 20068 20069 20070 20071 20072 20073 20074 20075 20076 20077 20078 20079 20080 20081 20082 20083 20084 20085 20086 20087 20088 20089 20090 20091 20092 20093 20094 20095 20096 20097 20098 20099 20100 20101 20102 20103 20104 20105 20106 20107 20108 20109 20110 20111 20112 20113 20114 20115 20116 20117 20118 20119 20120 20121 20122 20123 20124 20125 20126 20127 20128 20129 20130 20131 20132 20133 20134 20135 20136 20137 20138 20139 20140 20141 20142 20143 20144 20145 20146 20147 20148 20149 20150 20151 20152 20153 20154 20155 20156 20157 20158 20159 20160 20161 20162 20163 20164 20165 20166 20167 20168 20169 20170 20171 20172 20173 20174 20175 20176 20177 20178 20179 20180 20181 20182 20183 20184 20185 20186 20187 20188 20189 20190 20191 20192 20193 20194 20195 20196 20197 20198 20199 20200 20201 20202 20203 20204 20205 20206 20207 20208 20209 20210 20211 20212 20213 20214 20215 20216 20217 20218 20219 20220 20221 20222 20223 20224 20225 20226 20227 20228 20229 20230 20231 20232 20233 20234 20235 20236 20237 20238 20239 20240 20241 20242 20243 20244 20245 20246 20247 20248 20249 20250 20251 20252 20253 20254 20255 20256 20257 20258 20259 20260 20261 20262 20263 20264 20265 20266 20267 20268 20269 20270 20271 20272 20273 20274 20275 20276 20277 20278 20279 20280 20281 20282 20283 20284 20285 20286 20287 20288 20289 20290 20291 20292 20293 20294 20295 20296 20297 20298 20299 20300 20301 20302 20303 20304 20305 20306 20307 20308 20309 20310 20311 20312 20313 20314 20315 20316 20317 20318 20319 20320 20321 20322 20323 20324 20325 20326 20327 20328 20329 20330 20331 20332 20333 20334 20335 20336 20337 20338 20339 20340 20341 20342 20343 20344 20345 20346 20347 20348 20349 20350 20351 20352 20353 20354 20355 20356 20357 20358 20359 20360 20361 20362 20363 20364 20365 20366 20367 20368 20369 20370 20371 20372 20373 20374 20375 20376 20377 20378 20379 20380 20381 20382 20383 20384 20385 20386 20387 20388 20389 20390 20391 20392 20393 20394 20395 20396 20397 20398 20399 20400 20401 20402 20403 20404 20405 20406 20407 20408 20409 20410 20411 20412 20413 20414 20415 20416 20417 20418 20419 20420 20421 20422 20423 20424 20425 20426 20427 20428 20429 20430 20431 20432 20433 20434 20435 20436 20437 20438 20439 20440 20441 20442 20443 20444 20445 20446 20447 20448 20449 20450 20451 20452 20453 20454 20455 20456 20457 20458 20459 20460 20461 20462 20463 20464 20465 20466 20467 20468 20469 20470 20471 20472 20473 20474 20475 20476 20477 20478 20479 20480 20481 20482 20483 20484 20485 20486 20487 20488 20489 20490 20491 20492 20493 20494 20495 20496 20497 20498 20499 20500 20501 20502 20503 20504 20505 20506 20507 20508 20509 20510 20511 20512 20513 20514 20515 20516 20517 20518 20519 20520 20521 20522 20523 20524 20525 20526 20527 20528 20529 20530 20531 20532 20533 20534 20535 20536 20537 20538 20539 20540 20541 20542 20543 20544 20545 20546 20547 20548 20549 20550 20551 20552 20553 20554 20555 20556 20557 20558 20559 20560 20561 20562 20563 20564 20565 20566 20567 20568 20569 20570 20571 20572 20573 20574 20575 20576 20577 20578 20579 20580 20581 20582 20583 20584 20585 20586 20587 20588 20589 20590 20591 20592 20593 20594 20595 20596 20597 20598 20599 20600 20601 20602 20603 20604 20605 20606 20607 20608 20609 20610 20611 20612 20613 20614 20615 20616 20617 20618 20619 20620 20621 20622 20623 20624 20625 20626 20627 20628 20629 20630 20631 20632 20633 20634 20635 20636 20637 20638 20639 20640 20641 20642 20643 20644 20645 20646 20647 20648 20649 20650 20651 20652 20653 20654 20655 20656 20657 20658 20659 20660 20661 20662 20663 20664 20665 20666 20667 20668 20669 20670 20671 20672 20673 20674 20675 20676 20677 20678 20679 20680 20681 20682 20683 20684 20685 20686 20687 20688 20689 20690 20691 20692 20693 20694 20695 20696 20697 20698 20699 20700 20701 20702 20703 20704 20705 20706 20707 20708 20709 20710 20711 20712 20713 20714 20715 20716 20717 20718 20719 20720 20721 20722 20723 20724 20725 20726 20727 20728 20729 20730 20731 20732 20733 20734 20735 20736 20737 20738 20739 20740 20741 20742 20743 20744 20745 20746 20747 20748 20749 20750 20751 20752 20753 20754 20755 20756 20757 20758 20759 20760 20761 20762 20763 20764 20765 20766 20767 20768 20769 20770 20771 20772 20773 20774 20775 20776 20777 20778 20779 20780 20781 20782 20783 20784 20785 20786 20787 20788 20789 20790 20791 20792 20793 20794 20795 20796 20797 20798 20799 20800 20801 20802 20803 20804 20805 20806 20807 20808 20809 20810 20811 20812 20813 20814 20815 20816 20817 20818 20819 20820 20821 20822 20823 20824 20825 20826 20827 20828 20829 20830 20831 20832 20833 20834 20835 20836 20837 20838 20839 20840 20841 20842 20843 20844 20845 20846 20847 20848 20849 20850 20851 20852 20853 20854 20855 20856 20857 20858 20859 20860 20861 20862 20863 20864 20865 20866 20867 20868 20869 20870 20871 20872 20873 20874 20875 20876 20877 20878 20879 20880 20881 20882 20883 20884 20885 20886 20887 20888 20889 20890 20891 20892 20893 20894 20895 20896 20897 20898 20899 20900 20901 20902 20903 20904 20905 20906 20907 20908 20909 20910 20911 20912 20913 20914 20915 20916 20917 20918 20919 20920 20921 20922 20923 20924 20925 20926 20927 20928 20929 20930 20931 20932 20933 20934 20935 20936 20937 20938 20939 20940 20941 20942 20943 20944 20945 20946 20947 20948 20949 20950 20951 20952 20953 20954 20955 20956 20957 20958 20959 20960 20961 20962 20963 20964 20965 20966 20967 20968 20969 20970 20971 20972 20973 20974 20975 20976 20977 20978 20979 20980 20981 20982 20983 20984 20985 20986 20987 20988 20989 20990 20991 20992 20993 20994 20995 20996 20997 20998 20999 21000 21001 21002 21003 21004 21005 21006 21007 21008 21009 21010 21011 21012 21013 21014 21015 21016 21017 21018 21019 21020 21021 21022 21023 21024 21025 21026 21027 21028 21029 21030 21031 21032 21033 21034 21035 21036 21037 21038 21039 21040 21041 21042 21043 21044 21045 21046 21047 21048 21049 21050 21051 21052 21053 21054 21055 21056 21057 21058 21059 21060 21061 21062 21063 21064 21065 21066 21067 21068 21069 21070 21071 21072 21073 21074 21075 21076 21077 21078 21079 21080 21081 21082 21083 21084 21085 21086 21087 21088 21089 21090 21091 21092 21093 21094 21095 21096 21097 21098 21099 21100 21101 21102 21103 21104 21105 21106 21107 21108 21109 21110 21111 21112 21113 21114 21115 21116 21117 21118 21119 21120 21121 21122 21123 21124 21125 21126 21127 21128 21129 21130 21131 21132 21133 21134 21135 21136 21137 21138 21139 21140 21141 21142 21143 21144 21145 21146 21147 21148 21149 21150 21151 21152 21153 21154 21155 21156 21157 21158 21159 21160 21161 21162 21163 21164 21165 21166 21167 21168 21169 21170 21171 21172 21173 21174 21175 21176 21177 21178 21179 21180 21181 21182 21183 21184 21185 21186 21187 21188 21189 21190 21191 21192 21193 21194 21195 21196 21197 21198 21199 21200 21201 21202 21203 21204 21205 21206 21207 21208 21209 21210 21211 21212 21213 21214 21215 21216 21217 21218 21219 21220 21221 21222 21223 21224 21225 21226 21227 21228 21229 21230 21231 21232 21233 21234 21235 21236 21237 21238 21239 21240 21241 21242 21243 21244 21245 21246 21247 21248 21249 21250 21251 21252 21253 21254 21255 21256 21257 21258 21259 21260 21261 21262 21263 21264 21265 21266 21267 21268 21269 21270 21271 21272 21273 21274 21275 21276 21277 21278 21279 21280 21281 21282 21283 21284 21285 21286 21287 21288 21289 21290 21291 21292 21293 21294 21295 21296 21297 21298 21299 21300 21301 21302 21303 21304 21305 21306 21307 21308 21309 21310 21311 21312 21313 21314 21315 21316 21317 21318 21319 21320 21321 21322 21323 21324 21325 21326 21327 21328 21329 21330 21331 21332 21333 21334 21335 21336 21337 21338 21339 21340 21341 21342 21343 21344 21345 21346 21347 21348 21349 21350 21351 21352 21353 21354 21355 21356 21357 21358 21359 21360 21361 21362 21363 21364 21365 21366 21367 21368 21369 21370 21371 21372 21373 21374 21375 21376 21377 21378 21379 21380 21381 21382 21383 21384 21385 21386 21387 21388 21389 21390 21391 21392 21393 21394 21395 21396 21397 21398 21399 21400 21401 21402 21403 21404 21405 21406 21407 21408 21409 21410 21411 21412 21413 21414 21415 21416 21417 21418 21419 21420 21421 21422 21423 21424 21425 21426 21427 21428 21429 21430 21431 21432 21433 21434 21435 21436 21437 21438 21439 21440 21441 21442 21443 21444 21445 21446 21447 21448 21449 21450 21451 21452 21453 21454 21455 21456 21457 21458 21459 21460 21461 21462 21463 21464 21465 21466 21467 21468 21469 21470 21471 21472 21473 21474 21475 21476 21477 21478 21479 21480 21481 21482 21483 21484 21485 21486 21487 21488 21489 21490 21491 21492 21493 21494 21495 21496 21497 21498 21499 21500 21501 21502 21503 21504 21505 21506 21507 21508 21509 21510 21511 21512 21513 21514 21515 21516 21517 21518 21519 21520 21521 21522 21523 21524 21525 21526 21527 21528 21529 21530 21531 21532 21533 21534 21535 21536 21537 21538 21539 21540 21541 21542 21543 21544 21545 21546 21547 21548 21549 21550 21551 21552 21553 21554 21555 21556 21557 21558 21559 21560 21561 21562 21563 21564 21565 21566 21567 21568 21569 21570 21571 21572 21573 21574 21575 21576 21577 21578 21579 21580 21581 21582 21583 21584 21585 21586 21587 21588 21589 21590 21591 21592 21593 21594 21595 21596 21597 21598 21599 21600 21601 21602 21603 21604 21605 21606 21607 21608 21609 21610 21611 21612 21613 21614 21615 21616 21617 21618 21619 21620 21621 21622 21623 21624 21625 21626 21627 21628 21629 21630 21631 21632 21633 21634 21635 21636 21637 21638 21639 21640 21641 21642 21643 21644 21645 21646 21647 21648 21649 21650 21651 21652 21653 21654 21655 21656 21657 21658 21659 21660 21661 21662 21663 21664 21665 21666 21667 21668 21669 21670 21671 21672 21673 21674 21675 21676 21677 21678 21679 21680 21681 21682 21683 21684 21685 21686 21687 21688 21689 21690 21691 21692 21693 21694 21695 21696 21697 21698 21699 21700 21701 21702 21703 21704 21705 21706 21707 21708 21709 21710 21711 21712 21713 21714 21715 21716 21717 21718 21719 21720 21721 21722 21723 21724 21725 21726 21727 21728 21729 21730 21731 21732 21733 21734 21735 21736 21737 21738 21739 21740 21741 21742 21743 21744 21745 21746 21747 21748 21749 21750 21751 21752 21753 21754 21755 21756 21757 21758 21759 21760 21761 21762 21763 21764 21765 21766 21767 21768 21769 21770 21771 21772 21773 21774 21775 21776 21777 21778 21779 21780 21781 21782 21783 21784 21785 21786 21787 21788 21789 21790 21791 21792 21793 21794 21795 21796 21797 21798 21799 21800 21801 21802 21803 21804 21805 21806 21807 21808 21809 21810 21811 21812 21813 21814 21815 21816 21817 21818 21819 21820 21821 21822 21823 21824 21825 21826 21827 21828 21829 21830 21831 21832 21833 21834 21835 21836 21837 21838 21839 21840 21841 21842 21843 21844 21845 21846 21847 21848 21849 21850 21851 21852 21853 21854 21855 21856 21857 21858 21859 21860 21861 21862 21863 21864 21865 21866 21867 21868 21869 21870 21871 21872 21873 21874 21875 21876 21877 21878 21879 21880 21881 21882 21883 21884 21885 21886 21887 21888 21889 21890 21891 21892 21893 21894 21895 21896 21897 21898 21899 21900 21901 21902 21903 21904 21905 21906 21907 21908 21909 21910 21911 21912 21913 21914 21915 21916 21917 21918 21919 21920 21921 21922 21923 21924 21925 21926 21927 21928 21929 21930 21931 21932 21933 21934 21935 21936 21937 21938 21939 21940 21941 21942 21943 21944 21945 21946 21947 21948 21949 21950 21951 21952 21953 21954 21955 21956 21957 21958 21959 21960 21961 21962 21963 21964 21965 21966 21967 21968 21969 21970 21971 21972 21973 21974 21975 21976 21977 21978 21979 21980 21981 21982 21983 21984 21985 21986 21987 21988 21989 21990 21991 21992 21993 21994 21995 21996 21997 21998 21999 22000 22001 22002 22003 22004 22005 22006 22007 22008 22009 22010 22011 22012 22013 22014 22015 22016 22017 22018 22019 22020 22021 22022 22023 22024 22025 22026 22027 22028 22029 22030 22031 22032 22033 22034 22035 22036 22037 22038 22039 22040 22041 22042 22043 22044 22045 22046 22047 22048 22049 22050 22051 22052 22053 22054 22055 22056 22057 22058 22059 22060 22061 22062 22063 22064 22065 22066 22067 22068 22069 22070 22071 22072 22073 22074 22075 22076 22077 22078 22079 22080 22081 22082 22083 22084 22085 22086 22087 22088 22089 22090 22091 22092 22093 22094 22095 22096 22097 22098 22099 22100 22101 22102 22103 22104 22105 22106 22107 22108 22109 22110 22111 22112 22113 22114 22115 22116 22117 22118 22119 22120 22121 22122 22123 22124 22125 22126 22127 22128 22129 22130 22131 22132 22133 22134 22135 22136 22137 22138 22139 22140 22141 22142 22143 22144 22145 22146 22147 22148 22149 22150 22151 22152 22153 22154 22155 22156 22157 22158 22159 22160 22161 22162 22163 22164 22165 22166 22167 22168 22169 22170 22171 22172 22173 22174 22175 22176 22177 22178 22179 22180 22181 22182 22183 22184 22185 22186 22187 22188 22189 22190 22191 22192 22193 22194 22195 22196 22197 22198 22199 22200 22201 22202 22203 22204 22205 22206 22207 22208 22209 22210 22211 22212 22213 22214 22215 22216 22217 22218 22219 22220 22221 22222 22223 22224 22225 22226 22227 22228 22229 22230 22231 22232 22233 22234 22235 22236 22237 22238 22239 22240 22241 22242 22243 22244 22245 22246 22247 22248 22249 22250 22251 22252 22253 22254 22255 22256 22257 22258 22259 22260 22261 22262 22263 22264 22265 22266 22267 22268 22269 22270 22271 22272 22273 22274 22275 22276 22277 22278 22279 22280 22281 22282 22283 22284 22285 22286 22287 22288 22289 22290 22291 22292 22293 22294 22295 22296 22297 22298 22299 22300 22301 22302 22303 22304 22305 22306 22307 22308 22309 22310 22311 22312 22313 22314 22315 22316 22317 22318 22319 22320 22321 22322 22323 22324 22325 22326 22327 22328 22329 22330 22331 22332 22333 22334 22335 22336 22337 22338 22339 22340 22341 22342 22343 22344 22345 22346 22347 22348 22349 22350 22351 22352 22353 22354 22355 22356 22357 22358 22359 22360 22361 22362 22363 22364 22365 22366 22367 22368 22369 22370 22371 22372 22373 22374 22375 22376 22377 22378 22379 22380 22381 22382 22383 22384 22385 22386 22387 22388 22389 22390 22391 22392 22393 22394 22395 22396 22397 22398 22399 22400 22401 22402 22403 22404 22405 22406 22407 22408 22409 22410 22411 22412 22413 22414 22415 22416 22417 22418 22419 22420 22421 22422 22423 22424 22425 22426 22427 22428 22429 22430 22431 22432 22433 22434 22435 22436 22437 22438 22439 22440 22441 22442 22443 22444 22445 22446 22447 22448 22449 22450 22451 22452 22453 22454 22455 22456 22457 22458 22459 22460 22461 22462 22463 22464 22465 22466 22467 22468 22469 22470 22471 22472 22473 22474 22475 22476 22477 22478 22479 22480 22481 22482 22483 22484 22485 22486 22487 22488 22489 22490 22491 22492 22493 22494 22495 22496 22497 22498 22499 22500 22501 22502 22503 22504 22505 22506 22507 22508 22509 22510 22511 22512 22513 22514 22515 22516 22517 22518 22519 22520 22521 22522 22523 22524 22525 22526 22527 22528 22529 22530 22531 22532 22533 22534 22535 22536 22537 22538 22539 22540 22541 22542 22543 22544 22545 22546 22547 22548 22549 22550 22551 22552 22553 22554 22555 22556 22557 22558 22559 22560 22561 22562 22563 22564 22565 22566 22567 22568 22569 22570 22571 22572 22573 22574 22575 22576 22577 22578 22579 22580 22581 22582 22583 22584 22585 22586 22587 22588 22589 22590 22591 22592 22593 22594 22595 22596 22597 22598 22599 22600 22601 22602 22603 22604 22605 22606 22607 22608 22609 22610 22611 22612 22613 22614 22615 22616 22617 22618 22619 22620 22621 22622 22623 22624 22625 22626 22627 22628 22629 22630 22631 22632 22633 22634 22635 22636 22637 22638 22639 22640 22641 22642 22643 22644 22645 22646 22647 22648 22649 22650 22651 22652 22653 22654 22655 22656 22657 22658 22659 22660 22661 22662 22663 22664 22665 22666 22667 22668 22669 22670 22671 22672 22673 22674 22675 22676 22677 22678 22679 22680 22681 22682 22683 22684 22685 22686 22687 22688 22689 22690 22691 22692 22693 22694 22695 22696 22697 22698 22699 22700 22701 22702 22703 22704 22705 22706 22707 22708 22709 22710 22711 22712 22713 22714 22715 22716 22717 22718 22719 22720 22721 22722 22723 22724 22725 22726 22727 22728 22729 22730 22731 22732 22733 22734 22735 22736 22737 22738 22739 22740 22741 22742 22743 22744 22745 22746 22747 22748 22749 22750 22751 22752 22753 22754 22755 22756 22757 22758 22759 22760 22761 22762 22763 22764 22765 22766 22767 22768 22769 22770 22771 22772 22773 22774 22775 22776 22777 22778 22779 22780 22781 22782 22783 22784 22785 22786 22787 22788 22789 22790 22791 22792 22793 22794 22795 22796 22797 22798 22799 22800 22801 22802 22803 22804 22805 22806 22807 22808 22809 22810 22811 22812 22813 22814 22815 22816 22817 22818 22819 22820 22821 22822 22823 22824 22825 22826 22827 22828 22829 22830 22831 22832 22833 22834 22835 22836 22837 22838 22839 22840 22841 22842 22843 22844 22845 22846 22847 22848 22849 22850 22851 22852 22853 22854 22855 22856 22857 22858 22859 22860 22861 22862 22863 22864 22865 22866 22867 22868 22869 22870 22871 22872 22873 22874 22875 22876 22877 22878 22879 22880 22881 22882 22883 22884 22885 22886 22887 22888 22889 22890 22891 22892 22893 22894 22895 22896 22897 22898 22899 22900 22901 22902 22903 22904 22905 22906 22907 22908 22909 22910 22911 22912 22913 22914 22915 22916 22917 22918 22919 22920 22921 22922 22923 22924 22925 22926 22927 22928 22929 22930 22931 22932 22933 22934 22935 22936 22937 22938 22939 22940 22941 22942 22943 22944 22945 22946 22947 22948 22949 22950 22951 22952 22953 22954 22955 22956 22957 22958 22959 22960 22961 22962 22963 22964 22965 22966 22967 22968 22969 22970 22971 22972 22973 22974 22975 22976 22977 22978 22979 22980 22981 22982 22983 22984 22985 22986 22987 22988 22989 22990 22991 22992 22993 22994 22995 22996 22997 22998 22999 23000 23001 23002 23003 23004 23005 23006 23007 23008 23009 23010 23011 23012 23013 23014 23015 23016 23017 23018 23019 23020 23021 23022 23023 23024 23025 23026 23027 23028 23029 23030 23031 23032 23033 23034 23035 23036 23037 23038 23039 23040 23041 23042 23043 23044 23045 23046 23047 23048 23049 23050 23051 23052 23053 23054 23055 23056 23057 23058 23059 23060 23061 23062 23063 23064 23065 23066 23067 23068 23069 23070 23071 23072 23073 23074 23075 23076 23077 23078 23079 23080 23081 23082 23083 23084 23085 23086 23087 23088 23089 23090 23091 23092 23093 23094 23095 23096 23097 23098 23099 23100 23101 23102 23103 23104 23105 23106 23107 23108 23109 23110 23111 23112 23113 23114 23115 23116 23117 23118 23119 23120 23121 23122 23123 23124 23125 23126 23127 23128 23129 23130 23131 23132 23133 23134 23135 23136 23137 23138 23139 23140 23141 23142 23143 23144 23145 23146 23147 23148 23149 23150 23151 23152 23153 23154 23155 23156 23157 23158 23159 23160 23161 23162 23163 23164 23165 23166 23167 23168 23169 23170 23171 23172 23173 23174 23175 23176 23177 23178 23179 23180 23181 23182 23183 23184 23185 23186 23187 23188 23189 23190 23191 23192 23193 23194 23195 23196 23197 23198 23199 23200 23201 23202 23203 23204 23205 23206 23207 23208 23209 23210 23211 23212 23213 23214 23215 23216 23217 23218 23219 23220 23221 23222 23223 23224 23225 23226 23227 23228 23229 23230 23231 23232 23233 23234 23235 23236 23237 23238 23239 23240 23241 23242 23243 23244 23245 23246 23247 23248 23249 23250 23251 23252 23253 23254 23255 23256 23257 23258 23259 23260 23261 23262 23263 23264 23265 23266 23267 23268 23269 23270 23271 23272 23273 23274 23275 23276 23277 23278 23279 23280 23281 23282 23283 23284 23285 23286 23287 23288 23289 23290 23291 23292 23293 23294 23295 23296 23297 23298 23299 23300 23301 23302 23303 23304 23305 23306 23307 23308 23309 23310 23311 23312 23313 23314 23315 23316 23317 23318 23319 23320 23321 23322 23323 23324 23325 23326 23327 23328 23329 23330 23331 23332 23333 23334 23335 23336 23337 23338 23339 23340 23341 23342 23343 23344 23345 23346 23347 23348 23349 23350 23351 23352 23353 23354 23355 23356 23357 23358 23359 23360 23361 23362 23363 23364 23365 23366 23367 23368 23369 23370 23371 23372 23373 23374 23375 23376 23377 23378 23379 23380 23381 23382 23383 23384 23385 23386 23387 23388 23389 23390 23391 23392 23393 23394 23395 23396 23397 23398 23399 23400 23401 23402 23403 23404 23405 23406 23407 23408 23409 23410 23411 23412 23413 23414 23415 23416 23417 23418 23419 23420 23421 23422 23423 23424 23425 23426 23427 23428 23429 23430 23431 23432 23433 23434 23435 23436 23437 23438 23439 23440 23441 23442 23443 23444 23445 23446 23447 23448 23449 23450 23451 23452 23453 23454 23455 23456 23457 23458 23459 23460 23461 23462 23463 23464 23465 23466 23467 23468 23469 23470 23471 23472 23473 23474 23475 23476 23477 23478 23479 23480 23481 23482 23483 23484 23485 23486 23487 23488 23489 23490 23491 23492 23493 23494 23495 23496 23497 23498 23499 23500 23501 23502 23503 23504 23505 23506 23507 23508 23509 23510 23511 23512 23513 23514 23515 23516 23517 23518 23519 23520 23521 23522 23523 23524 23525 23526 23527 23528 23529 23530 23531 23532 23533 23534 23535 23536 23537 23538 23539 23540 23541 23542 23543 23544 23545 23546 23547 23548 23549 23550 23551 23552 23553 23554 23555 23556 23557 23558 23559 23560 23561 23562 23563 23564 23565 23566 23567 23568 23569 23570 23571 23572 23573 23574 23575 23576 23577 23578 23579 23580 23581 23582 23583 23584 23585 23586 23587 23588 23589 23590 23591 23592 23593 23594 23595 23596 23597 23598 23599 23600 23601 23602 23603 23604 23605 23606 23607 23608 23609 23610 23611 23612 23613 23614 23615 23616 23617 23618 23619 23620 23621 23622 23623 23624 23625 23626 23627 23628 23629 23630 23631 23632 23633 23634 23635 23636 23637 23638 23639 23640 23641 23642 23643 23644 23645 23646 23647 23648 23649 23650 23651 23652 23653 23654 23655 23656 23657 23658 23659 23660 23661 23662 23663 23664 23665 23666 23667 23668 23669 23670 23671 23672 23673 23674 23675 23676 23677 23678 23679 23680 23681 23682 23683 23684 23685 23686 23687 23688 23689 23690 23691 23692 23693 23694 23695 23696 23697 23698 23699 23700 23701 23702 23703 23704 23705 23706 23707 23708 23709 23710 23711 23712 23713 23714 23715 23716 23717 23718 23719 23720 23721 23722 23723 23724 23725 23726 23727 23728 23729 23730 23731 23732 23733 23734 23735 23736 23737 23738 23739 23740 23741 23742 23743 23744 23745 23746 23747 23748 23749 23750 23751 23752 23753 23754 23755 23756 23757 23758 23759 23760 23761 23762 23763 23764 23765 23766 23767 23768 23769 23770 23771 23772 23773 23774 23775 23776 23777 23778 23779 23780 23781 23782 23783 23784 23785 23786 23787 23788 23789 23790 23791 23792 23793 23794 23795 23796 23797 23798 23799 23800 23801 23802 23803 23804 23805 23806 23807 23808 23809 23810 23811 23812 23813 23814 23815 23816 23817 23818 23819 23820 23821 23822 23823 23824 23825 23826 23827 23828 23829 23830 23831 23832 23833 23834 23835 23836 23837 23838 23839 23840 23841 23842 23843 23844 23845 23846 23847 23848 23849 23850 23851 23852 23853 23854 23855 23856 23857 23858 23859 23860 23861 23862 23863 23864 23865 23866 23867 23868 23869 23870 23871 23872 23873 23874 23875 23876 23877 23878 23879 23880 23881 23882 23883 23884 23885 23886 23887 23888 23889 23890 23891 23892 23893 23894 23895 23896 23897 23898 23899 23900 23901 23902 23903 23904 23905 23906 23907 23908 23909 23910 23911 23912 23913 23914 23915 23916 23917 23918 23919 23920 23921 23922 23923 23924 23925 23926 23927 23928 23929 23930 23931 23932 23933 23934 23935 23936 23937 23938 23939 23940 23941 23942 23943 23944 23945 23946 23947 23948 23949 23950 23951 23952 23953 23954 23955 23956 23957 23958 23959 23960 23961 23962 23963 23964 23965 23966 23967 23968 23969 23970 23971 23972 23973 23974 23975 23976 23977 23978 23979 23980 23981 23982 23983 23984 23985 23986 23987 23988 23989 23990 23991 23992 23993 23994 23995 23996 23997 23998 23999 24000 24001 24002 24003 24004 24005 24006 24007 24008 24009 24010 24011 24012 24013 24014 24015 24016 24017 24018 24019 24020 24021 24022 24023 24024 24025 24026 24027 24028 24029 24030 24031 24032 24033 24034 24035 24036 24037 24038 24039 24040 24041 24042 24043 24044 24045 24046 24047 24048 24049 24050 24051 24052 24053 24054 24055 24056 24057 24058 24059 24060 24061 24062 24063 24064 24065 24066 24067 24068 24069 24070 24071 24072 24073 24074 24075 24076 24077 24078 24079 24080 24081 24082 24083 24084 24085 24086 24087 24088 24089 24090 24091 24092 24093 24094 24095 24096 24097 24098 24099 24100 24101 24102 24103 24104 24105 24106 24107 24108 24109 24110 24111 24112 24113 24114 24115 24116 24117 24118 24119 24120 24121 24122 24123 24124 24125 24126 24127 24128 24129 24130 24131 24132 24133 24134 24135 24136 24137 24138 24139 24140 24141 24142 24143 24144 24145 24146 24147 24148 24149 24150 24151 24152 24153 24154 24155 24156 24157 24158 24159 24160 24161 24162 24163 24164 24165 24166 24167 24168 24169 24170 24171 24172 24173 24174 24175 24176 24177 24178 24179 24180 24181 24182 24183 24184 24185 24186 24187 24188 24189 24190 24191 24192 24193 24194 24195 24196 24197 24198 24199 24200 24201 24202 24203 24204 24205 24206 24207 24208 24209 24210 24211 24212 24213 24214 24215 24216 24217 24218 24219 24220 24221 24222 24223 24224 24225 24226 24227 24228 24229 24230 24231 24232 24233 24234 24235 24236 24237 24238 24239 24240 24241 24242 24243 24244 24245 24246 24247 24248 24249 24250 24251 24252 24253 24254 24255 24256 24257 24258 24259 24260 24261 24262 24263 24264 24265 24266 24267 24268 24269 24270 24271 24272 24273 24274 24275 24276 24277 24278 24279 24280 24281 24282 24283 24284 24285 24286 24287 24288 24289 24290 24291 24292 24293 24294 24295 24296 24297 24298 24299 24300 24301 24302 24303 24304 24305 24306 24307 24308 24309 24310 24311 24312 24313 24314 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 24326 24327 24328 24329 24330 24331 24332 24333 24334 24335 24336 24337 24338 24339 24340 24341 24342 24343 24344 24345 24346 24347 24348 24349 24350 24351 24352 24353 24354 24355 24356 24357 24358 24359 24360 24361 24362 24363 24364 24365 24366 24367 24368 24369 24370 24371 24372 24373 24374 24375 24376 24377 24378 24379 24380 24381 24382 24383 24384 24385 24386 24387 24388 24389 24390 24391 24392 24393 24394 24395 24396 24397 24398 24399 24400 24401 24402 24403 24404 24405 24406 24407 24408 24409 24410 24411 24412 24413 24414 24415 24416 24417 24418 24419 24420 24421 24422 24423 24424 24425 24426 24427 24428 24429 24430 24431 24432 24433 24434 24435 24436 24437 24438 24439 24440 24441 24442 24443 24444 24445 24446 24447 24448 24449 24450 24451 24452 24453 24454 24455 24456 24457 24458 24459 24460 24461 24462 24463 24464 24465 24466 24467 24468 24469 24470 24471 24472 24473 24474 24475 24476 24477 24478 24479 24480 24481 24482 24483 24484 24485 24486 24487 24488 24489 24490 24491 24492 24493 24494 24495 24496 24497 24498 24499 24500 24501 24502 24503 24504 24505 24506 24507 24508 24509 24510 24511 24512 24513 24514 24515 24516 24517 24518 24519 24520 24521 24522 24523 24524 24525 24526 24527 24528 24529 24530 24531 24532 24533 24534 24535 24536 24537 24538 24539 24540 24541 24542 24543 24544 24545 24546 24547 24548 24549 24550 
# translation of zh_TW.po to 繁體中文
# translation of zh_TW.po to Chinese Traditional
# translation of DrakX-zh_TW.po to Chinese Traditional
# drakbootdisk messages in Traditional Chinese
# Copyright (C) 2000, 2003, 2004 Free Software Foundation, Inc.
# Platin <platin@cle.linux.org.tw> , 2000
# Kenduest Lee <kenduest@i18n.linux.org.tw> , 2002
# Danny Zeng <danny@zeng.com.cn>, 2000.
# Joe Man <trmetal@yahoo.com.hk>, 2001.
# Chong Sein Yeo <csyeo@hal-pc.org>, 2003.
# Hilbert <freehil@yahoo.com>, 2003, 2004.
# Hilbert <h@mandrake.org>, 2004.
# hilbert <h@mandrake.org>, 2004.
# Shiva Huang <blueshiva@giga.net.tw>, 2005.
# Shiva Huang <shivahuang@gmail.com>, 2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-02-24 14:10+0100\n"
"PO-Revision-Date: 2005-03-19 13:18+0800\n"
"Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
"Language-Team: Traditional Chinese <zh@li.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=utf-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 1.3.1\n"
"X-Poedit-Language: Chinese\n"
"X-Poedit-Country: TAIWAN\n"

#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "您想要格式化那一個 USB 隨身碟？"

#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this operation."
msgstr ""
"您正要格式化 USB 裝置 \"%s\"。這將會刪除它裡面所有的資料。\n"
"請確認這個選取的裝置是您要格式化的 USB 隨身碟。\n"
"我們建議您在進行這個動作的時候移除所有其它的 USB 儲存裝置。"

#: ../move/move.pm:448
#: ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "無法寫入隨身碟"

#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"您的 USB 隨身碟似乎有防寫保護。請先移除它，解除防寫保護之\n"
"後重新接到電腦上。"

#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "重試"

#: ../move/move.pm:453
#: ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "不用 USB key 而繼續"

#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandrake Move again."
msgstr ""
"您的 USB 隨身碟似乎有防寫保護，但是我們現在無法安全的移除它。\n"
"\n"
"\n"
"請按下此按鈕來重新開機，移除隨身碟並解除它的寫入保護，接著重\n"
"新插入隨身碟，最後重新啟動 Mandrake Move。"

#: ../move/move.pm:468
#: help.pm:409
#: install_steps_interactive.pm:1317
#, c-format
msgid "Reboot"
msgstr "重新開機"

#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandrake Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandrake Move as a normal live Mandrake\n"
"Operating System."
msgstr ""

#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "需要一個隨身碟來儲存您的資料"

#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "再次偵測到 USB 隨身碟"

#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "設定 USB 隨身碟"

#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "請稍候，正在將系統設定檔設定於 USB 隨身碟上..."

#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "請輸入您的使用者資訊，密碼將會用於螢幕保護程式的解除密碼"

#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "自動設定"

#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "請稍候，正在偵測與設定裝置中..."

#: ../move/move.pm:604
#: ../move/move.pm:660
#: ../move/move.pm:664
#: diskdrake/dav.pm:75
#: diskdrake/hd_gtk.pm:116
#: diskdrake/interactive.pm:227
#: diskdrake/interactive.pm:240
#: diskdrake/interactive.pm:393
#: diskdrake/interactive.pm:411
#: diskdrake/interactive.pm:541
#: diskdrake/interactive.pm:546
#: diskdrake/smbnfs_gtk.pm:42
#: fsedit.pm:183
#: install_any.pm:1564
#: install_any.pm:1587
#: install_steps.pm:82
#: install_steps_interactive.pm:38
#: interactive/http.pm:117
#: interactive/http.pm:118
#: network/netconnect.pm:1037
#: network/netconnect.pm:1041
#: network/netconnect.pm:1046
#: network/netconnect.pm:1072
#: network/netconnect.pm:1141
#: network/netconnect.pm:1145
#: network/netconnect.pm:1283
#: network/netconnect.pm:1288
#: network/netconnect.pm:1306
#: network/netconnect.pm:1491
#: printer/printerdrake.pm:238
#: printer/printerdrake.pm:245
#: printer/printerdrake.pm:270
#: printer/printerdrake.pm:416
#: printer/printerdrake.pm:421
#: printer/printerdrake.pm:434
#: printer/printerdrake.pm:444
#: printer/printerdrake.pm:508
#: printer/printerdrake.pm:635
#: printer/printerdrake.pm:1288
#: printer/printerdrake.pm:1335
#: printer/printerdrake.pm:1372
#: printer/printerdrake.pm:1416
#: printer/printerdrake.pm:1420
#: printer/printerdrake.pm:1434
#: printer/printerdrake.pm:1524
#: printer/printerdrake.pm:1605
#: printer/printerdrake.pm:1609
#: printer/printerdrake.pm:1613
#: printer/printerdrake.pm:1662
#: printer/printerdrake.pm:1719
#: printer/printerdrake.pm:1723
#: printer/printerdrake.pm:1737
#: printer/printerdrake.pm:1848
#: printer/printerdrake.pm:1852
#: printer/printerdrake.pm:1889
#: printer/printerdrake.pm:1957
#: printer/printerdrake.pm:1975
#: printer/printerdrake.pm:1984
#: printer/printerdrake.pm:1993
#: printer/printerdrake.pm:2004
#: printer/printerdrake.pm:2066
#: printer/printerdrake.pm:2159
#: printer/printerdrake.pm:2678
#: printer/printerdrake.pm:2949
#: printer/printerdrake.pm:2955
#: printer/printerdrake.pm:3501
#: printer/printerdrake.pm:3505
#: printer/printerdrake.pm:3509
#: printer/printerdrake.pm:3965
#: printer/printerdrake.pm:4205
#: printer/printerdrake.pm:4225
#: printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366
#: printer/printerdrake.pm:4483
#: standalone/drakTermServ:392
#: standalone/drakTermServ:753
#: standalone/drakTermServ:760
#: standalone/drakTermServ:779
#: standalone/drakTermServ:998
#: standalone/drakTermServ:1478
#: standalone/drakTermServ:1483
#: standalone/drakTermServ:1490
#: standalone/drakTermServ:1502
#: standalone/drakTermServ:1523
#: standalone/drakauth:35
#: standalone/drakbackup:511
#: standalone/drakbackup:625
#: standalone/drakbackup:1127
#: standalone/drakbackup:1160
#: standalone/drakbackup:1671
#: standalone/drakbackup:1827
#: standalone/drakbackup:2421
#: standalone/drakbackup:4110
#: standalone/drakbackup:4330
#: standalone/drakbug:191
#: standalone/drakclock:124
#: standalone/drakconnect:649
#: standalone/drakconnect:652
#: standalone/drakconnect:671
#: standalone/drakfloppy:297
#: standalone/drakfloppy:300
#: standalone/drakfloppy:306
#: standalone/drakfont:209
#: standalone/drakfont:222
#: standalone/drakfont:258
#: standalone/drakfont:604
#: standalone/draksplash:21
#: standalone/draksplash:501
#: standalone/drakxtv:107
#: standalone/finish-install:39
#: standalone/logdrake:169
#: standalone/logdrake:437
#: standalone/logdrake:442
#: standalone/scannerdrake:59
#: standalone/scannerdrake:202
#: standalone/scannerdrake:261
#: standalone/scannerdrake:715
#: standalone/scannerdrake:726
#: standalone/scannerdrake:865
#: standalone/scannerdrake:876
#: standalone/scannerdrake:946
#: wizards.pm:95
#: wizards.pm:99
#: wizards.pm:121
#, c-format
msgid "Error"
msgstr "錯誤"

#: ../move/move.pm:605
#: install_steps.pm:83
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"發生了一個錯誤, 但我不知道該如何妥善處置它.\n"
"要繼續安裝工作的話請小心."

#: ../move/move.pm:660
#: install_steps_interactive.pm:38
#, c-format
msgid "An error occurred"
msgstr "發生一個錯誤"

#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandrake Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""

#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "移除系統設定檔案"

#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "簡單地重新開機"

#: ../move/tree/mdk_totem:50
#: ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "您只能以沒有 CDROM 支援下跑"

#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "殺死那些程式"

#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "沒有 CDROM 支援"

#: ../move/tree/mdk_totem:76
#: diskdrake/hd_gtk.pm:95
#: diskdrake/interactive.pm:1020
#: diskdrake/interactive.pm:1030
#: diskdrake/interactive.pm:1083
#, c-format
msgid "Read carefully!"
msgstr "詳細閱讀！"

#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"您可以在下列程式執行時使用別台光碟機：\n"
"%s"

#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "正在複製到記憶體中以便退出光碟"

#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"

#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"

#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"

#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"

#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"

#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"

#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"

#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"

#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB 或者更多"

#: Xconfig/card.pm:159
#, c-format
msgid "X server"
msgstr "X 伺服器"

#: Xconfig/card.pm:160
#, c-format
msgid "Choose an X server"
msgstr "選取一個 X 伺服器"

#: Xconfig/card.pm:192
#, c-format
msgid "Multi-head configuration"
msgstr "多頭端(Multi-head)設定"

#: Xconfig/card.pm:193
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"您的系統支援多頭端(multiple head)設定組態.\n"
"您打算怎麼做呢?"

#: Xconfig/card.pm:262
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "無法安裝 Xorg 套件: %s"

#: Xconfig/card.pm:272
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "選擇顯示卡上的記憶體大小"

#: Xconfig/card.pm:349
#, c-format
msgid "Xorg configuration"
msgstr "Xorg 設定"

#: Xconfig/card.pm:351
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "您想要有哪一個 Xorg 設定?"

#: Xconfig/card.pm:384
#, c-format
msgid "Configure all heads independently"
msgstr "獨立設定所有頭端(head)"

#: Xconfig/card.pm:385
#, c-format
msgid "Use Xinerama extension"
msgstr "使用 Xinerama 延伸"

#: Xconfig/card.pm:390
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "僅設定 \"%s\"%s 卡"

#: Xconfig/card.pm:402
#: Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"

#: Xconfig/card.pm:409
#: Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s 含 3D 硬體加速功能"

#: Xconfig/card.pm:411
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "您的顯示卡搭配 Xorg %s 有 3D 硬體加速功能."

#: Xconfig/card.pm:417
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s 搭配實驗性質 3D 硬體加速"

#: Xconfig/card.pm:419
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"您的顯示卡搭配 Xorg %s 能夠啟用 3D 硬體加速功能，\n"
"但是請注意，這是實驗性質的支援項目，而且可能會凍結您的電腦。"

#: Xconfig/main.pm:90
#: Xconfig/main.pm:91
#: Xconfig/monitor.pm:117
#: any.pm:914
#, c-format
msgid "Custom"
msgstr "自訂"

#: Xconfig/main.pm:115
#: diskdrake/dav.pm:26
#: help.pm:14
#: install_steps_interactive.pm:86
#: printer/printerdrake.pm:737
#: printer/printerdrake.pm:4296
#: printer/printerdrake.pm:4742
#: standalone/draksplash:120
#: standalone/logdrake:174
#: standalone/net_applet:183
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "離開"

#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "顯示卡"

#: Xconfig/main.pm:120
#: Xconfig/monitor.pm:111
#, c-format
msgid "Monitor"
msgstr "螢幕"

#: Xconfig/main.pm:123
#: Xconfig/resolution_and_depth.pm:221
#, c-format
msgid "Resolution"
msgstr "解析度"

#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "測試"

#: Xconfig/main.pm:133
#: diskdrake/dav.pm:65
#: diskdrake/interactive.pm:437
#: diskdrake/removable.pm:24
#: diskdrake/smbnfs_gtk.pm:80
#: standalone/drakfont:493
#: standalone/drakfont:555
#, c-format
msgid "Options"
msgstr "選項"

#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "您的 Xorg 設定檔已損毀，我們將忽略它。"

#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"保留目前的變更？\n"
"目前的組態是：\n"
"\n"
"%s"

#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "選取一個螢幕給頭端(head) #%d"

#: Xconfig/monitor.pm:112
#, c-format
msgid "Choose a monitor"
msgstr "選取一個螢幕"

#: Xconfig/monitor.pm:118
#, c-format
msgid "Plug'n Play"
msgstr "隨插即用"

#: Xconfig/monitor.pm:119
#: mouse.pm:49
#, c-format
msgid "Generic"
msgstr "一般"

#: Xconfig/monitor.pm:120
#: standalone/drakconnect:569
#: standalone/harddrake2:52
#: standalone/harddrake2:86
#, c-format
msgid "Vendor"
msgstr "廠商"

#: Xconfig/monitor.pm:130
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "隨插即用 Plug'n Play 偵測失敗, 請選擇正確的螢幕"

#: Xconfig/monitor.pm:135
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync range\n"
"that is beyond the capabilities of your monitor: you may damage your monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"這兩個重要的參數是您螢幕的垂直更新頻率，以及最重要\n"
"的水平更新頻率，前者是您整個螢幕影像更新的頻率，\n"
"後者是電子槍掃描的速率。\n"
"\n"
"特別重要的是，不要設定一個超過您正在用的螢幕\n"
"同步範圍的螢幕：您可能傷害您的螢幕。\n"
"若您不確定的話，請選擇保守一點的設定值。"

#: Xconfig/monitor.pm:142
#, c-format
msgid "Horizontal refresh rate"
msgstr "水平更新頻率"

#: Xconfig/monitor.pm:143
#, c-format
msgid "Vertical refresh rate"
msgstr "垂直更新頻率"

#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 色 (8 位元)"

#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "3 萬 2 千色 (15 位元)"

#: Xconfig/resolution_and_depth.pm:14
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "6 萬 5 千色 (16 位元)"

#: Xconfig/resolution_and_depth.pm:15
#, c-format
msgid "16 million colors (24 bits)"
msgstr "1 千 6 百萬色 (24 位元)"

#: Xconfig/resolution_and_depth.pm:133
#, c-format
msgid "Resolutions"
msgstr "解析度"

#: Xconfig/resolution_and_depth.pm:270
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "選取解析度以及顏色深度"

#: Xconfig/resolution_and_depth.pm:271
#, c-format
msgid "Graphics card: %s"
msgstr "顯示卡：%s"

#: Xconfig/resolution_and_depth.pm:285
#: interactive.pm:424
#: interactive/gtk.pm:768
#: interactive/http.pm:103
#: interactive/http.pm:156
#: interactive/newt.pm:317
#: interactive/newt.pm:419
#: interactive/stdio.pm:39
#: interactive/stdio.pm:142
#: interactive/stdio.pm:143
#: interactive/stdio.pm:172
#: standalone/drakTermServ:199
#: standalone/drakTermServ:490
#: standalone/drakbackup:3967
#: standalone/drakbackup:4027
#: standalone/drakbackup:4071
#: standalone/drakconnect:165
#: standalone/drakconnect:849
#: standalone/drakconnect:936
#: standalone/drakconnect:1035
#: standalone/drakfont:576
#: standalone/drakroam:388
#: standalone/drakups:208
#: standalone/net_monitor:344
#: ugtk2.pm:409
#: ugtk2.pm:506
#: ugtk2.pm:900
#: ugtk2.pm:923
#, c-format
msgid "Ok"
msgstr "確定"

#: Xconfig/resolution_and_depth.pm:285
#: diskdrake/smbnfs_gtk.pm:81
#: help.pm:89
#: help.pm:444
#: install_steps_gtk.pm:480
#: install_steps_interactive.pm:422
#: install_steps_interactive.pm:826
#: interactive.pm:425
#: interactive/gtk.pm:772
#: interactive/http.pm:104
#: interactive/http.pm:160
#: interactive/newt.pm:316
#: interactive/newt.pm:423
#: interactive/stdio.pm:39
#: interactive/stdio.pm:142
#: interactive/stdio.pm:176
#: printer/printerdrake.pm:3579
#: standalone/drakautoinst:217
#: standalone/drakbackup:3893
#: standalone/drakbackup:3897
#: standalone/drakbackup:3955
#: standalone/drakconnect:164
#: standalone/drakconnect:934
#: standalone/drakconnect:1034
#: standalone/drakfont:668
#: standalone/drakfont:745
#: standalone/drakups:215
#: standalone/logdrake:174
#: standalone/net_monitor:343
#: ugtk2.pm:403
#: ugtk2.pm:504
#: ugtk2.pm:513
#: ugtk2.pm:900
#, c-format
msgid "Cancel"
msgstr "取消"

#: Xconfig/resolution_and_depth.pm:285
#: diskdrake/hd_gtk.pm:153
#: install_steps_gtk.pm:228
#: install_steps_gtk.pm:629
#: interactive.pm:519
#: interactive/gtk.pm:638
#: interactive/gtk.pm:640
#: standalone/drakTermServ:284
#: standalone/drakbackup:3889
#: standalone/drakbug:104
#: standalone/drakconnect:160
#: standalone/drakconnect:245
#: standalone/drakfont:511
#: standalone/drakperm:134
#: standalone/draksec:336
#: standalone/draksec:338
#: standalone/draksec:356
#: standalone/draksec:358
#: ugtk2.pm:1031
#: ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "輔助說明"

#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "設定值測試"

#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "您想要測試設定值嗎？"

#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "警告：測試這張顯示卡時可能會凍結您的系統"

#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"發生了一個錯誤：\n"
"%s\n"
"請試著改變某些參數"

#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "%d 秒後離開"

#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "這是正確的設定值嗎？"

#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "鍵盤布局： %s\n"

#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "滑鼠種類： %s\n"

#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "滑鼠裝置： %s\n"

#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "螢幕： %s\n"

#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "螢幕水平更新頻率： %s\n"

#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "螢幕垂直更新頻率： %s\n"

#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "顯示卡： %s\n"

#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "顯示卡繪圖記憶體： %s kB\n"

#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "色深： %s\n"

#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "解析度： %s\n"

#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg 驅動程式： %s\n"

#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "開機時啟動圖形介面"

#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface (Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"我可以設定您的電腦在開機時自動啟動圖形介面 (Xorg)，\n"
"您希望在重新開機時啟動 Xorg？"

#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"您的顯示卡似乎有支援 TV-OUT 連接裝置。\n"
"所以這張顯示卡能用 frame-buffer 工作。\n"
"\n"
"若是要使用的話，您需要在重新開機之前連接您的顯示卡與電視。\n"
"然後選擇 \"TVout\" 這個開機載入項目\n"
"\n"
"您要使用這項功能嗎？"

#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "您的電視用什麼標準？"

#: Xconfig/xfree.pm:571
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""

#: any.pm:140
#: harddrake/sound.pm:191
#: install_any.pm:652
#: interactive.pm:462
#: standalone/drakconnect:167
#: standalone/drakconnect:613
#: standalone/draksec:68
#: standalone/drakups:101
#: standalone/drakxtv:92
#: standalone/harddrake2:231
#: standalone/service_harddrake:204
#, c-format
msgid "Please wait"
msgstr "請稍候"

#: any.pm:140
#, c-format
msgid "Bootloader installation in progress"
msgstr "開機載入器安裝中"

#: any.pm:151
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""

#: any.pm:162
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "開機程式安裝失敗, 發生如下之錯誤："

#: any.pm:168
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader.  If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"您也許需要改變您的 Open Firmware 上面的開機裝置設定, \n"
"以便於開啟開機啟動程式的功能。如果您開機時並沒有開到\n"
"開機程式的任何訊息, 於重新開機時按住 Command-Option-O-F, \n"
"然後輸入: setenv boot-device %s,\\\\:tbxi\n"
"然後再輸入: shut-down\n"
"然後你下一次開機時應該就可以看到開機啟動程式的訊息了。"

#: any.pm:206
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"您決定要將開機載入器安裝於分割區上面.\n"
"這意旨你已經有一個開機載入器於你開機的硬碟上\n"
"(比方 System Commander).\n"
"\n"
"您正用那顆硬碟開機呢?"

#: any.pm:229
#: help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "硬碟的第一個扇區 (MBR)"

#: any.pm:230
#, c-format
msgid "First sector of the root partition"
msgstr "根分隔區的第一扇區"

#: any.pm:232
#, c-format
msgid "On Floppy"
msgstr "在軟碟機"

#: any.pm:234
#: help.pm:739
#: printer/printerdrake.pm:3962
#, c-format
msgid "Skip"
msgstr "略過"

#: any.pm:238
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/GRUB 安裝"

#: any.pm:239
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "您要將開機載入器安裝在那裡?"

#: any.pm:264
#: standalone/drakboot:307
#, c-format
msgid "Boot Style Configuration"
msgstr "開機樣式組態設定"

#: any.pm:266
#: any.pm:298
#, c-format
msgid "Bootloader main options"
msgstr "開機載入器主要選項"

#: any.pm:270
#, c-format
msgid "Give the ram size in MB"
msgstr "輸入記憶體大小 (以 MB 為單位)"

#: any.pm:272
#, c-format
msgid "Option ``Restrict command line options'' is of no use without a password"
msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無用"

#: any.pm:273
#: any.pm:606
#: authentication.pm:176
#, c-format
msgid "The passwords do not match"
msgstr "密碼不符合"

#: any.pm:273
#: any.pm:606
#: authentication.pm:176
#: diskdrake/interactive.pm:1270
#, c-format
msgid "Please try again"
msgstr "請再試一次"

#: any.pm:278
#: any.pm:301
#, c-format
msgid "Bootloader to use"
msgstr "要用的開機載入器"

#: any.pm:280
#: any.pm:303
#, c-format
msgid "Boot device"
msgstr "開機裝置"

#: any.pm:282
#, c-format
msgid "Delay before booting default image"
msgstr "在開機到預設的影像前的延遲"

#: any.pm:283
#, c-format
msgid "Enable ACPI"
msgstr "啟用 ACPI"

#: any.pm:285
#, c-format
msgid "Force no APIC"
msgstr "強制無 APIC"

#: any.pm:287
#, c-format
msgid "Force No Local APIC"
msgstr "強制無本地端 APIC"

#: any.pm:289
#: any.pm:633
#: authentication.pm:181
#: diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:633
#: printer/printerdrake.pm:1596
#: printer/printerdrake.pm:1716
#: standalone/drakbackup:1653
#: standalone/drakbackup:3495
#: standalone/drakups:295
#, c-format
msgid "Password"
msgstr "密碼"

#: any.pm:290
#: any.pm:634
#: authentication.pm:182
#, c-format
msgid "Password (again)"
msgstr "密碼 (再一次)"

#: any.pm:291
#, c-format
msgid "Restrict command line options"
msgstr "限制命令列選項"

#: any.pm:291
#, c-format
msgid "restrict"
msgstr "限制"

#: any.pm:293
#, c-format
msgid "Clean /tmp at each boot"
msgstr "每次開機時清理 /tmp"

#: any.pm:294
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "需要的話, 輸入精確的記憶體大小 (找到 %d MB)"

#: any.pm:302
#, c-format
msgid "Init Message"
msgstr "啟動訊息"

#: any.pm:304
#, c-format
msgid "Open Firmware Delay"
msgstr "開啟 Firmware 延遲"

#: any.pm:305
#, c-format
msgid "Kernel Boot Timeout"
msgstr "核心啟動時間逾時"

#: any.pm:306
#, c-format
msgid "Enable CD Boot?"
msgstr "允許 CD 開機?"

#: any.pm:307
#, c-format
msgid "Enable OF Boot?"
msgstr "允許 OF 開機?"

#: any.pm:308
#, c-format
msgid "Default OS?"
msgstr "預設 OS?"

#: any.pm:361
#, c-format
msgid "Image"
msgstr "影像"

#: any.pm:362
#: any.pm:372
#, c-format
msgid "Root"
msgstr "根目錄"

#: any.pm:363
#: any.pm:385
#, c-format
msgid "Append"
msgstr "附加"

#: any.pm:365
#: standalone/drakboot:309
#: standalone/drakboot:313
#, c-format
msgid "Video mode"
msgstr "視訊模式"

#: any.pm:367
#, c-format
msgid "Initrd"
msgstr ""

#: any.pm:368
#, c-format
msgid "Network profile"
msgstr "網路 profile"

#: any.pm:377
#: any.pm:382
#: any.pm:384
#, c-format
msgid "Label"
msgstr "標籤"

#: any.pm:379
#: any.pm:389
#: harddrake/v4l.pm:275
#: standalone/drakfloppy:84
#: standalone/drakfloppy:90
#: standalone/draksec:52
#, c-format
msgid "Default"
msgstr "預設"

#: any.pm:386
#, c-format
msgid "Initrd-size"
msgstr "Initrd-大小"

#: any.pm:388
#, c-format
msgid "NoVideo"
msgstr ""

#: any.pm:399
#, c-format
msgid "Empty label not allowed"
msgstr "標籤空白不被允許"

#: any.pm:400
#, c-format
msgid "You must specify a kernel image"
msgstr "您需要指定一個核心影像"

#: any.pm:400
#, c-format
msgid "You must specify a root partition"
msgstr "您需要指定一個 root 分割區"

#: any.pm:401
#, c-format
msgid "This label is already used"
msgstr "這個標籤已經被用過了"

#: any.pm:415
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "您要新增哪一類的項目?"

#: any.pm:416
#, c-format
msgid "Linux"
msgstr "Linux"

#: any.pm:416
#, c-format
msgid "Other OS (SunOS...)"
msgstr "其他作業系統 (SunOS...)"

#: any.pm:417
#, c-format
msgid "Other OS (MacOS...)"
msgstr "其他作業系統 (MacOS...)"

#: any.pm:417
#, c-format
msgid "Other OS (Windows...)"
msgstr "其他作業系統 (Windows...)"

#: any.pm:445
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"到此為止有這些選項於您的開機選單.\n"
"您可以建立多的選項或修改既有的選項."

#: any.pm:592
#, c-format
msgid "access to X programs"
msgstr "存取 X 程式"

#: any.pm:593
#, c-format
msgid "access to rpm tools"
msgstr "存取 rpm 工具程式"

#: any.pm:594
#, c-format
msgid "allow \"su\""
msgstr "允許 \"su\""

#: any.pm:595
#, c-format
msgid "access to administrative files"
msgstr "存取管理權限的的檔案"

#: any.pm:596
#, c-format
msgid "access to network tools"
msgstr "存取網路工具"

#: any.pm:597
#, c-format
msgid "access to compilation tools"
msgstr "存取編譯工具"

#: any.pm:602
#, c-format
msgid "(already added %s)"
msgstr "( %s 已經加入)"

#: any.pm:607
#, c-format
msgid "This password is too simple"
msgstr "這密碼太簡單了"

#: any.pm:608
#, c-format
msgid "Please give a user name"
msgstr "請輸入使用者名稱"

#: any.pm:609
#, c-format
msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "使用者名稱只能含有小寫英文字母, 數字, `-' 與 `_'"

#: any.pm:610
#, c-format
msgid "The user name is too long"
msgstr "這個使用者名稱太長了"

#: any.pm:611
#, c-format
msgid "This user name has already been added"
msgstr "這個使用者早就已經被加入過了"

#: any.pm:615
#, c-format
msgid "Add user"
msgstr "新增使用者"

#: any.pm:616
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"輸入一位使用者\n"
"%s"

#: any.pm:619
#: diskdrake/dav.pm:66
#: diskdrake/hd_gtk.pm:157
#: diskdrake/removable.pm:26
#: diskdrake/smbnfs_gtk.pm:82
#: help.pm:530
#: interactive/http.pm:151
#: printer/printerdrake.pm:191
#: printer/printerdrake.pm:376
#: printer/printerdrake.pm:4742
#: standalone/drakbackup:2708
#: standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "完成"

#: any.pm:620
#: help.pm:51
#, c-format
msgid "Accept user"
msgstr "接受使用者"

#: any.pm:631
#, c-format
msgid "Real name"
msgstr "真實名稱"

#: any.pm:632
#: standalone/drakbackup:1648
#, c-format
msgid "Login name"
msgstr "登入名稱"

#: any.pm:635
#, c-format
msgid "Shell"
msgstr "命令殼"

#: any.pm:637
#, c-format
msgid "Icon"
msgstr "圖示"

#: any.pm:684
#: security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "自動登入"

#: any.pm:685
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統."

#: any.pm:686
#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "您想要使用這個功能嗎?"

#: any.pm:687
#, c-format
msgid "Choose the default user:"
msgstr "選取預設的使用者:"

#: any.pm:688
#, c-format
msgid "Choose the window manager to run:"
msgstr "選取您想使用的視窗管理員:"

#: any.pm:700
#, c-format
msgid "Please choose a language to use."
msgstr "請選擇要使用那個語系."

#: any.pm:701
#, c-format
msgid "Language choice"
msgstr "語言選擇"

#: any.pm:727
#, c-format
msgid ""
"Mandrakelinux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandrakelinux 能支援多種語言. 選擇您想安裝的語言.\n"
"他們將可使用於您的安裝完成與您重新開始您的系統之後."

#: any.pm:746
#: help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "預設使用 Unicode"

#: any.pm:747
#: help.pm:647
#, c-format
msgid "All languages"
msgstr "所有語言"

#: any.pm:786
#: help.pm:566
#: help.pm:855
#: install_steps_interactive.pm:946
#, c-format
msgid "Country / Region"
msgstr "國家/地區"

#: any.pm:787
#, c-format
msgid "Please choose your country."
msgstr "請選擇您的國家."

#: any.pm:789
#, c-format
msgid "Here is the full list of available countries"
msgstr "以下是全部可用的所有的國家清單"

#: any.pm:790
#, c-format
msgid "Other Countries"
msgstr "其他國家"

#: any.pm:798
#, c-format
msgid "Input method:"
msgstr "輸入方式:"

#: any.pm:799
#: install_any.pm:388
#: network/netconnect.pm:323
#: network/netconnect.pm:328
#: printer/printerdrake.pm:99
#: printer/printerdrake.pm:2111
#, c-format
msgid "None"
msgstr "無"

#: any.pm:914
#, c-format
msgid "No sharing"
msgstr "不分享"

#: any.pm:914
#, c-format
msgid "Allow all users"
msgstr "允許所有使用者"

#: any.pm:918
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"您要允許使用者能夠分享他們自己的目錄嗎?\n"
"若是要開放將允許使用者能在 konqueror 或者是 nautilus 內\n"
"點選 \"Share\"\n"
"\n"
"\"Custom\" 允許每一個使用者粒度.\n"

#: any.pm:930
#, c-format
msgid "NFS: the traditional Unix file sharing system, with less support on Mac and Windows."
msgstr "NFS: 傳統 Unix 檔案分享系統, 跟著少的 Mac 與 Windows 支援."

#: any.pm:933
#, c-format
msgid "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux systems."
msgstr "SMB: 一個 Windows, Mac OS X 與許多先進的 Linux 系統用的檔案分享系統."

#: any.pm:941
#, c-format
msgid "You can export using NFS or SMB. Please select which you would like to use."
msgstr "您能夠用 NFS 或者是 SMB 匯出. 請選擇您想要用那一個."

#: any.pm:966
#, c-format
msgid "Launch userdrake"
msgstr "啟動 userdrake"

#: any.pm:966
#: printer/printerdrake.pm:3802
#: printer/printerdrake.pm:3805
#: printer/printerdrake.pm:3806
#: printer/printerdrake.pm:3807
#: printer/printerdrake.pm:5036
#: standalone/drakTermServ:294
#: standalone/drakbackup:4089
#: standalone/drakbug:126
#: standalone/drakfont:499
#: standalone/drakfont:595
#: standalone/net_monitor:123
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "關閉"

#: any.pm:968
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"每個使用者的分享都是使用 \"fileshare\" 群組.\n"
"您可以執行 userdrake 在該群組內加入使用者."

#: authentication.pm:16
#, c-format
msgid "Local file"
msgstr "本地端檔案"

#: authentication.pm:17
#, c-format
msgid "LDAP"
msgstr "LDAP"

#: authentication.pm:18
#, c-format
msgid "NIS"
msgstr "NIS"

#: authentication.pm:19
#, c-format
msgid "Smart Card"
msgstr ""

#: authentication.pm:20
#: authentication.pm:148
#, c-format
msgid "Windows Domain"
msgstr "Windows 網域"

#: authentication.pm:21
#, c-format
msgid "Active Directory with SFU"
msgstr ""

#: authentication.pm:22
#, c-format
msgid "Active Directory with Winbind"
msgstr ""

#: authentication.pm:51
#, c-format
msgid "Local file:"
msgstr "本地端檔案:"

#: authentication.pm:51
#, c-format
msgid "Use local for all authentication and information user tell in local file"
msgstr ""

#: authentication.pm:52
#, c-format
msgid "LDAP:"
msgstr "LDAP:"

#: authentication.pm:52
#, c-format
msgid "Tells your computer to use LDAP for some or all authentication. LDAP consolidates certain types of information within your organization."
msgstr ""

#: authentication.pm:53
#, c-format
msgid "NIS:"
msgstr "NIS:"

#: authentication.pm:53
#, c-format
msgid "Allows you to run a group of computers in the same Network Information Service domain with a common password and group file."
msgstr ""

#: authentication.pm:54
#, c-format
msgid "Windows Domain:"
msgstr "Windows 網域："

#: authentication.pm:54
#, c-format
msgid "Winbind allows the system to retrieve information and authenticate users in a Windows domain."
msgstr ""

#: authentication.pm:55
#, c-format
msgid "Active Directory with SFU:"
msgstr ""

#: authentication.pm:55
#: authentication.pm:56
#, c-format
msgid "Kerberos is a secure system for providing network authentication services."
msgstr ""

#: authentication.pm:56
#, c-format
msgid "Active Directory with Winbind:"
msgstr ""

#: authentication.pm:81
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP 認證"

#: authentication.pm:82
#, c-format
msgid "LDAP Base dn"
msgstr ""

#: authentication.pm:83
#: share/compssUsers.pl:101
#, c-format
msgid "LDAP Server"
msgstr "LDAP 伺服器"

#: authentication.pm:96
#: fsedit.pm:21
#, c-format
msgid "simple"
msgstr "簡單"

#: authentication.pm:97
#, c-format
msgid "TLS"
msgstr ""

#: authentication.pm:98
#, c-format
msgid "SSL"
msgstr "SSL"

#: authentication.pm:99
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "安全性佈置 (SASL/Kerberos)"

#: authentication.pm:106
#: authentication.pm:144
#, c-format
msgid "Authentication Active Directory"
msgstr "Active Directory 認證"

#: authentication.pm:107
#: authentication.pm:146
#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "網域"

#: authentication.pm:109
#: diskdrake/dav.pm:63
#: help.pm:146
#: printer/printerdrake.pm:135
#: share/compssUsers.pl:81
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "伺服器"

#: authentication.pm:110
#, c-format
msgid "LDAP users database"
msgstr "LDAP 使用者資料庫"

#: authentication.pm:111
#, c-format
msgid "Use Anonymous BIND "
msgstr ""

#: authentication.pm:112
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""

#: authentication.pm:113
#, c-format
msgid "Password for user"
msgstr "使用者密碼"

#: authentication.pm:114
#, c-format
msgid "Encryption"
msgstr "加密"

#: authentication.pm:125
#, c-format
msgid "Authentication NIS"
msgstr "NIS 認證"

#: authentication.pm:126
#, c-format
msgid "NIS Domain"
msgstr "NIS 網域"

#: authentication.pm:127
#, c-format
msgid "NIS Server"
msgstr "NIS 伺服器"

#: authentication.pm:132
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are good."
msgstr ""
"要能夠在 W2K PDC 下正常使用, 您或許需要使用管理者權限在 Windows 主機那邊執行:C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add然後重新啟動伺服器.\n"
"您另外還需要網域管理者帳號密碼以便於能夠加入機器到 Windows(TM) 網域內.\n"
"如果網路沒有被啟用, DrakX 程式會於網路設定步驟後企圖加入網域若是這樣設定失敗且網域認證莫名其妙不能作用的話, 執行'smbpasswd -j DOMAIN -U USER%%PASSWORD' 指令, 其中的 DOMAIN 為你的Windows(tm)網域名稱, USER 與 PASSWORD 為管理者的帳號與密碼.\n"
"最後使用 'wbinfo -t' 測試確認認證功能是否可以正常工作."

#: authentication.pm:144
#, c-format
msgid "Authentication Windows Domain"
msgstr "Windows 網域認證"

#: authentication.pm:149
#, c-format
msgid "Domain Admin User Name"
msgstr "網域管理使用者名稱"

#: authentication.pm:150
#, c-format
msgid "Domain Admin Password"
msgstr "網域管理密碼"

#: authentication.pm:151
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr "使用 ldmap 來儲存 UID/SID"

#: authentication.pm:152
#, c-format
msgid "Default Idmap "
msgstr "預設 Idmap"

#: authentication.pm:165
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr "設定管理者 (root) 密碼與網路認證方式"

#: authentication.pm:166
#, c-format
msgid "Set administrator (root) password"
msgstr "設定管理者 (root) 密碼"

#: authentication.pm:167
#: standalone/drakvpn:1125
#, c-format
msgid "Authentication method"
msgstr "認證方式"

#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:172
#: help.pm:722
#, c-format
msgid "No password"
msgstr "沒有密碼"

#: authentication.pm:178
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "這個密碼太短了 (一定至少要有 %d 個字元才行)"

#: authentication.pm:183
#: network/netconnect.pm:328
#: network/netconnect.pm:634
#: standalone/drakauth:23
#: standalone/drakauth:25
#: standalone/drakconnect:459
#, c-format
msgid "Authentication"
msgstr "認證方式"

#: authentication.pm:296
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "沒有 NIS 網域無法使用廣播 (broadcast)"

#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:728
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"歡迎使用作業系統選擇程式！\n"
"\n"
"請由上面的清單中選擇一個作業系統或者\n"
"稍待由預設的作業系統開機。\n"
"\n"

#: bootloader.pm:815
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO 圖形介面選單"

#: bootloader.pm:816
#, c-format
msgid "LILO with text menu"
msgstr "LILO 文字選單"

#: bootloader.pm:817
#, c-format
msgid "Grub"
msgstr "Grub"

#: bootloader.pm:818
#, c-format
msgid "Yaboot"
msgstr ""

#: bootloader.pm:881
#, c-format
msgid "not enough room in /boot"
msgstr "/boot 沒有足夠的空間"

#: bootloader.pm:1295
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "您不能把開機載入程式安裝在 %s 分割區上\n"

#: bootloader.pm:1340
#, c-format
msgid "Your bootloader configuration must be updated because partition has been renumbered"
msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"

#: bootloader.pm:1355
#, c-format
msgid "The bootloader can not be installed correctly. You have to boot rescue and choose \"%s\""
msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""

#: bootloader.pm:1356
#, c-format
msgid "Re-install Boot Loader"
msgstr "重新安裝開機載入程式"

#: common.pm:125
#, c-format
msgid "KB"
msgstr "KB"

#: common.pm:125
#, c-format
msgid "MB"
msgstr "MB"

#: common.pm:125
#, c-format
msgid "GB"
msgstr "GB"

#: common.pm:133
#, c-format
msgid "TB"
msgstr "TB"

#: common.pm:141
#, c-format
msgid "%d minutes"
msgstr "%d 分鐘"

#: common.pm:143
#, c-format
msgid "1 minute"
msgstr "1 分鐘"

#: common.pm:145
#, c-format
msgid "%d seconds"
msgstr "%d 秒"

#: common.pm:240
#, c-format
msgid "kdesu missing"
msgstr "kdesu 遺失"

#: common.pm:243
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper 遺失"

#: crypto.pm:14
#: crypto.pm:43
#: lang.pm:202
#: network/adsl_consts.pm:50
#: network/adsl_consts.pm:58
#: network/adsl_consts.pm:66
#, c-format
msgid "Austria"
msgstr "澳洲"

#: crypto.pm:15
#: crypto.pm:34
#: lang.pm:209
#: network/adsl_consts.pm:74
#: network/adsl_consts.pm:82
#: network/adsl_consts.pm:93
#: network/adsl_consts.pm:101
#: network/netconnect.pm:50
#, c-format
msgid "Belgium"
msgstr "比利時"

#: crypto.pm:16
#: lang.pm:230
#: network/adsl_consts.pm:780
#: network/adsl_consts.pm:788
#: network/adsl_consts.pm:798
#, c-format
msgid "Switzerland"
msgstr "Switzerland"

#: crypto.pm:17
#: lang.pm:237
#, c-format
msgid "Costa Rica"
msgstr "哥斯大黎加"

#: crypto.pm:18
#: crypto.pm:35
#: lang.pm:243
#: network/adsl_consts.pm:319
#, c-format
msgid "Czech Republic"
msgstr "捷克共和國"

#: crypto.pm:19
#: crypto.pm:36
#: lang.pm:244
#: network/adsl_consts.pm:437
#: network/adsl_consts.pm:445
#, c-format
msgid "Germany"
msgstr "德國"

#: crypto.pm:20
#: crypto.pm:33
#: lang.pm:262
#: network/adsl_consts.pm:343
#: network/adsl_consts.pm:354
#: network/adsl_consts.pm:365
#: network/adsl_consts.pm:375
#: network/adsl_consts.pm:385
#: network/adsl_consts.pm:396
#: network/adsl_consts.pm:407
#: network/adsl_consts.pm:417
#: network/adsl_consts.pm:427
#: network/netconnect.pm:47
#, c-format
msgid "France"
msgstr "法國"

#: crypto.pm:21
#: crypto.pm:37
#: lang.pm:275
#: network/adsl_consts.pm:455
#, c-format
msgid "Greece"
msgstr "希臘"

#: crypto.pm:22
#: lang.pm:286
#: network/adsl_consts.pm:463
#, c-format
msgid "Hungary"
msgstr "匈牙利"

#: crypto.pm:23
#: crypto.pm:42
#: lang.pm:295
#: network/adsl_consts.pm:489
#: network/adsl_consts.pm:499
#: network/adsl_consts.pm:509
#: network/adsl_consts.pm:517
#: network/netconnect.pm:49
#: standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "義大利"

#: crypto.pm:24
#: crypto.pm:41
#: lang.pm:347
#: network/adsl_consts.pm:545
#: network/adsl_consts.pm:553
#: network/adsl_consts.pm:561
#: network/adsl_consts.pm:569
#: network/netconnect.pm:48
#, c-format
msgid "Netherlands"
msgstr "荷蘭"

#: crypto.pm:25
#: crypto.pm:38
#: lang.pm:348
#: network/adsl_consts.pm:577
#: network/adsl_consts.pm:582
#: network/adsl_consts.pm:587
#: network/adsl_consts.pm:592
#: network/adsl_consts.pm:597
#: network/adsl_consts.pm:602
#: network/adsl_consts.pm:607
#, c-format
msgid "Norway"
msgstr "挪威"

#: crypto.pm:26
#: lang.pm:360
#: network/adsl_consts.pm:614
#: network/adsl_consts.pm:624
#, c-format
msgid "Poland"
msgstr "波蘭"

#: crypto.pm:27
#: crypto.pm:39
#: lang.pm:377
#: network/adsl_consts.pm:772
#, c-format
msgid "Sweden"
msgstr "瑞典"

#: crypto.pm:28
#: lang.pm:382
#, c-format
msgid "Slovakia"
msgstr "Slovakia"

#: crypto.pm:29
#: lang.pm:406
#, c-format
msgid "Taiwan"
msgstr "台灣"

#: crypto.pm:40
#: crypto.pm:75
#: lang.pm:411
#: network/netconnect.pm:51
#, c-format
msgid "United States"
msgstr "美國"

#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""

#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "新增"

#: diskdrake/dav.pm:61
#: diskdrake/interactive.pm:443
#: diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "卸載"

#: diskdrake/dav.pm:62
#: diskdrake/interactive.pm:440
#: diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "掛載"

#: diskdrake/dav.pm:64
#: diskdrake/interactive.pm:435
#: diskdrake/interactive.pm:653
#: diskdrake/interactive.pm:672
#: diskdrake/removable.pm:23
#: diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "掛載點"

#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "請輸入 WevDAV 主機 URL"

#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL 格式必須為 http:// 或是 https://"

#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "伺服器："

#: diskdrake/dav.pm:110
#: diskdrake/interactive.pm:504
#: diskdrake/interactive.pm:1166
#: diskdrake/interactive.pm:1241
#, c-format
msgid "Mount point: "
msgstr "掛載點："

#: diskdrake/dav.pm:111
#: diskdrake/interactive.pm:1248
#, c-format
msgid "Options: %s"
msgstr "選項： %s"

#: diskdrake/hd_gtk.pm:95
#, c-format
msgid "Please make a backup of your data first"
msgstr "請您先備份您的資料"

#: diskdrake/hd_gtk.pm:98
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is enough)\n"
"at the beginning of the disk"
msgstr "如果您打算使用 aboot 程式的話，請注意您至少需要在磁碟最前端保留一塊可用的空間 (2048 扇區就足夠了)"

#: diskdrake/hd_gtk.pm:155
#: help.pm:530
#, c-format
msgid "Wizard"
msgstr "精靈"

#: diskdrake/hd_gtk.pm:188
#, c-format
msgid "Choose action"
msgstr "選擇動作"

#: diskdrake/hd_gtk.pm:192
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"您有一個很大的 Microsoft Windows 分割區。\n"
"建議您先重新改變這個分割區的大小\n"
"(點選它，然後按 \"重新改變大小\")"

#: diskdrake/hd_gtk.pm:194
#, c-format
msgid "Please click on a partition"
msgstr "請點選一個分割區"

#: diskdrake/hd_gtk.pm:208
#: diskdrake/smbnfs_gtk.pm:63
#: install_steps_gtk.pm:482
#: standalone/drakbackup:2943
#: standalone/drakbackup:3003
#, c-format
msgid "Details"
msgstr "詳細資訊"

#: diskdrake/hd_gtk.pm:254
#, c-format
msgid "No hard drives found"
msgstr "找不到硬碟裝置"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Ext2"
msgstr "Ext2"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Journalised FS"
msgstr "日誌式檔案系統 (JFS)"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Swap"
msgstr "Swap"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "SunOS"
msgstr "SunOS"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "HFS"
msgstr "HFS"

#: diskdrake/hd_gtk.pm:338
#, c-format
msgid "Windows"
msgstr "Windows"

#: diskdrake/hd_gtk.pm:339
#: install_steps_gtk.pm:284
#: mouse.pm:168
#: services.pm:162
#: standalone/drakbackup:1609
#: standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "其他"

#: diskdrake/hd_gtk.pm:339
#: diskdrake/interactive.pm:1181
#, c-format
msgid "Empty"
msgstr "空白"

#: diskdrake/hd_gtk.pm:343
#, c-format
msgid "Filesystem types:"
msgstr "檔案系統格式："

#: diskdrake/hd_gtk.pm:360
#: diskdrake/hd_gtk.pm:362
#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``%s'' instead"
msgstr "用 ``%s'' 代替"

#: diskdrake/hd_gtk.pm:360
#: diskdrake/interactive.pm:459
#, c-format
msgid "Create"
msgstr "建立"

#: diskdrake/hd_gtk.pm:360
#: diskdrake/hd_gtk.pm:368
#: diskdrake/interactive.pm:436
#: diskdrake/interactive.pm:606
#: diskdrake/removable.pm:25
#: diskdrake/removable.pm:48
#: standalone/harddrake2:106
#: standalone/harddrake2:115
#, c-format
msgid "Type"
msgstr "格式"

#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:362
#: diskdrake/interactive.pm:444
#: standalone/drakperm:124
#: standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "刪除"

#: diskdrake/hd_gtk.pm:368
#, c-format
msgid "Use ``Unmount'' first"
msgstr "要先 ``Unmount''"

#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose another partition"
msgstr "選擇另一個分割區"

#: diskdrake/interactive.pm:191
#, c-format
msgid "Choose a partition"
msgstr "選擇一個分割區"

#: diskdrake/interactive.pm:220
#, c-format
msgid "Exit"
msgstr "離開"

#: diskdrake/interactive.pm:253
#: help.pm:530
#, c-format
msgid "Undo"
msgstr "復原"

#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to normal mode"
msgstr "切換到一般模式"

#: diskdrake/interactive.pm:253
#, c-format
msgid "Toggle to expert mode"
msgstr "切換到專家模式"

#: diskdrake/interactive.pm:272
#, c-format
msgid "Continue anyway?"
msgstr "無論如何都要繼續嗎？"

#: diskdrake/interactive.pm:275
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"您應該格式化分割區 %s。\n"
"否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
"仍然要離開嗎？"

#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without saving"
msgstr "不儲存就離開"

#: diskdrake/interactive.pm:282
#, c-format
msgid "Quit without writing the partition table?"
msgstr "放棄寫入硬碟分割表就離開？"

#: diskdrake/interactive.pm:287
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"

#: diskdrake/interactive.pm:294
#: install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "您必須重新開機以使更動過的硬碟分割表生效"

#: diskdrake/interactive.pm:307
#: help.pm:530
#, c-format
msgid "Clear all"
msgstr "全部清除"

#: diskdrake/interactive.pm:308
#: help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "自動分配"

#: diskdrake/interactive.pm:309
#: help.pm:530
#: help.pm:566
#: help.pm:606
#: help.pm:855
#: install_steps_interactive.pm:122
#, c-format
msgid "More"
msgstr "更多"

#: diskdrake/interactive.pm:314
#, c-format
msgid "Hard drive information"
msgstr "硬碟資訊"

#: diskdrake/interactive.pm:346
#, c-format
msgid "All primary partitions are used"
msgstr "主分割區數目已經全被用了"

#: diskdrake/interactive.pm:347
#, c-format
msgid "I can not add any more partitions"
msgstr "我無法再新增任何分割區了"

#: diskdrake/interactive.pm:348
#, c-format
msgid "To have more partitions, please delete one to be able to create an extended partition"
msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區"

#: diskdrake/interactive.pm:359
#: help.pm:530
#, c-format
msgid "Save partition table"
msgstr "寫入硬碟分割表"

#: diskdrake/interactive.pm:360
#: help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "回存硬碟分割表"

#: diskdrake/interactive.pm:361
#: help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "搶救硬碟分割表"

#: diskdrake/interactive.pm:363
#: help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "重新載入硬碟分割表"

#: diskdrake/interactive.pm:365
#, c-format
msgid "Removable media automounting"
msgstr "可移除式裝置自動掛載"

#: diskdrake/interactive.pm:376
#: diskdrake/interactive.pm:402
#, c-format
msgid "Select file"
msgstr "選擇檔案"

#: diskdrake/interactive.pm:388
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"備份的硬碟分割表有不一樣的大小\n"
"要繼續嗎？"

#: diskdrake/interactive.pm:417
#, c-format
msgid "Trying to rescue partition table"
msgstr "正在試圖救回硬碟分割表"

#: diskdrake/interactive.pm:423
#, c-format
msgid "Detailed information"
msgstr "詳細資訊"

#: diskdrake/interactive.pm:438
#: diskdrake/interactive.pm:743
#, c-format
msgid "Resize"
msgstr "重新變更大小"

#: diskdrake/interactive.pm:439
#, c-format
msgid "Format"
msgstr "格式化"

#: diskdrake/interactive.pm:441
#, c-format
msgid "Add to RAID"
msgstr "加入到磁碟陣列"

#: diskdrake/interactive.pm:442
#, c-format
msgid "Add to LVM"
msgstr "加入到 LVM"

#: diskdrake/interactive.pm:445
#, c-format
msgid "Remove from RAID"
msgstr "由磁碟陣列中移除"

#: diskdrake/interactive.pm:446
#, c-format
msgid "Remove from LVM"
msgstr "由 LVM 中移除"

#: diskdrake/interactive.pm:447
#, c-format
msgid "Modify RAID"
msgstr "變更磁碟陣列"

#: diskdrake/interactive.pm:448
#, c-format
msgid "Use for loopback"
msgstr "作為 loopback"

#: diskdrake/interactive.pm:497
#, c-format
msgid "Create a new partition"
msgstr "建立新的分割區"

#: diskdrake/interactive.pm:500
#, c-format
msgid "Start sector: "
msgstr "開始的磁區："

#: diskdrake/interactive.pm:502
#: diskdrake/interactive.pm:899
#, c-format
msgid "Size in MB: "
msgstr "大小 (MB):"

#: diskdrake/interactive.pm:503
#: diskdrake/interactive.pm:900
#, c-format
msgid "Filesystem type: "
msgstr "檔案系統格式："

#: diskdrake/interactive.pm:508
#, c-format
msgid "Preference: "
msgstr "偏好設定："

#: diskdrake/interactive.pm:511
#, c-format
msgid "Logical volume name "
msgstr "邏輯磁區名稱"

#: diskdrake/interactive.pm:541
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"您無法建立新的分割區\n"
"(因為您已經達到主分割區的最大值)。\n"
"您需要先移除一個主分割區然後建立一個延伸分割區。"

#: diskdrake/interactive.pm:571
#, c-format
msgid "Remove the loopback file?"
msgstr "移除 loopback 檔案？"

#: diskdrake/interactive.pm:590
#, c-format
msgid "After changing type of partition %s, all data on this partition will be lost"
msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"

#: diskdrake/interactive.pm:602
#, c-format
msgid "Change partition type"
msgstr "改變分割區格式"

#: diskdrake/interactive.pm:603
#: diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "您要用那一種檔案系統？"

#: diskdrake/interactive.pm:611
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "由 ext2 正在切換到 ext3"

#: diskdrake/interactive.pm:640
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "您要把 loopback 檔案 %s 掛載在那裡？"

#: diskdrake/interactive.pm:641
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "您要把這個裝置 %s 掛載在那裡？"

#: diskdrake/interactive.pm:646
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"因為這個分割區被用作 loop back 使用，所以無法解除\n"
"這個掛載點。請先取消 loopback 的設定"

#: diskdrake/interactive.pm:671
#, c-format
msgid "Where do you want to mount %s?"
msgstr "您要將 %s 掛載在那裡？"

#: diskdrake/interactive.pm:695
#: diskdrake/interactive.pm:774
#: install_interactive.pm:156
#: install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "正在重設大小"

#: diskdrake/interactive.pm:695
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "正在計算 FAT 分割區的邊界"

#: diskdrake/interactive.pm:731
#, c-format
msgid "This partition is not resizeable"
msgstr "這個分割區無法重新調整大小"

#: diskdrake/interactive.pm:736
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "所有在這個分割區上的資料都應該先經過備份"

#: diskdrake/interactive.pm:738
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"

#: diskdrake/interactive.pm:743
#, c-format
msgid "Choose the new size"
msgstr "選取新的大小"

#: diskdrake/interactive.pm:744
#, c-format
msgid "New size in MB: "
msgstr "新大小 (MB)："

#: diskdrake/interactive.pm:787
#: install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""

#: diskdrake/interactive.pm:825
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "選取一存在的磁碟陣列加入到"

#: diskdrake/interactive.pm:827
#: diskdrake/interactive.pm:844
#, c-format
msgid "new"
msgstr "新的"

#: diskdrake/interactive.pm:842
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "選取一個已經存在的 LVM 以加入"

#: diskdrake/interactive.pm:848
#, c-format
msgid "LVM name?"
msgstr "LVM 名稱？"

#: diskdrake/interactive.pm:884
#, c-format
msgid "This partition can not be used for loopback"
msgstr "這個分割區不能用來作為 loopback"

#: diskdrake/interactive.pm:897
#, c-format
msgid "Loopback"
msgstr "Loopback"

#: diskdrake/interactive.pm:898
#, c-format
msgid "Loopback file name: "
msgstr "Loopback 檔案名稱："

#: diskdrake/interactive.pm:903
#, c-format
msgid "Give a file name"
msgstr "輸入一個檔案名稱"

#: diskdrake/interactive.pm:906
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"

#: diskdrake/interactive.pm:907
#, c-format
msgid "File already exists. Use it?"
msgstr "檔案已經存在了。要使用它嗎？"

#: diskdrake/interactive.pm:930
#, c-format
msgid "Mount options"
msgstr "掛載參數"

#: diskdrake/interactive.pm:937
#, c-format
msgid "Various"
msgstr "各種的"

#: diskdrake/interactive.pm:1002
#, c-format
msgid "device"
msgstr "裝置"

#: diskdrake/interactive.pm:1003
#, c-format
msgid "level"
msgstr "階層"

#: diskdrake/interactive.pm:1004
#, c-format
msgid "chunk size in KiB"
msgstr "組塊大小以 Kib 計量"

#: diskdrake/interactive.pm:1021
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "請小心：這個動作很危險。"

#: diskdrake/interactive.pm:1036
#, c-format
msgid "What type of partitioning?"
msgstr "以那種形式分割？"

#: diskdrake/interactive.pm:1074
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "您需要重新開機以便於讓異動的設定生效"

#: diskdrake/interactive.pm:1083
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"

#: diskdrake/interactive.pm:1096
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"

#: diskdrake/interactive.pm:1112
#, c-format
msgid "Move files to the new partition"
msgstr "將檔案搬移到新的分割區"

#: diskdrake/interactive.pm:1112
#, c-format
msgid "Hide files"
msgstr "隱藏檔案"

#: diskdrake/interactive.pm:1113
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"%s 目錄已經包含了資料了\n"
"(%s)"

#: diskdrake/interactive.pm:1124
#, c-format
msgid "Moving files to the new partition"
msgstr "正在將檔案搬移到新的分割區"

#: diskdrake/interactive.pm:1128
#, c-format
msgid "Copying %s"
msgstr "正在複製 %s"

#: diskdrake/interactive.pm:1132
#, c-format
msgid "Removing %s"
msgstr "正在移除 %s"

#: diskdrake/interactive.pm:1146
#, c-format
msgid "partition %s is now known as %s"
msgstr "該分割區 %s 目前被認知為 %s"

#: diskdrake/interactive.pm:1147
#, c-format
msgid "Partitions have been renumbered: "
msgstr "分割區已經重新編號："

#: diskdrake/interactive.pm:1167
#: diskdrake/interactive.pm:1226
#, c-format
msgid "Device: "
msgstr "裝置："

#: diskdrake/interactive.pm:1168
#, c-format
msgid "Devfs name: "
msgstr "Devfs 名稱："

#: diskdrake/interactive.pm:1169
#, c-format
msgid "Volume label: "
msgstr "磁區標籤：\""

#: diskdrake/interactive.pm:1170
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS 磁碟代號：%s (猜測值)\n"

#: diskdrake/interactive.pm:1174
#: diskdrake/interactive.pm:1183
#: diskdrake/interactive.pm:1244
#, c-format
msgid "Type: "
msgstr "格式："

#: diskdrake/interactive.pm:1178
#: install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "名稱："

#: diskdrake/interactive.pm:1185
#, c-format
msgid "Start: sector %s\n"
msgstr "始於：第 %s 扇區\n"

#: diskdrake/interactive.pm:1186
#, c-format
msgid "Size: %s"
msgstr "大小：%s"

#: diskdrake/interactive.pm:1188
#, c-format
msgid ", %s sectors"
msgstr "，%s 扇區"

#: diskdrake/interactive.pm:1190
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "%d 磁柱到第 %d 磁柱\n"

#: diskdrake/interactive.pm:1191
#, c-format
msgid "Number of logical extents: %d"
msgstr ""

#: diskdrake/interactive.pm:1192
#, c-format
msgid "Formatted\n"
msgstr "已格式化\n"

#: diskdrake/interactive.pm:1193
#, c-format
msgid "Not formatted\n"
msgstr "未格式化\n"

#: diskdrake/interactive.pm:1194
#, c-format
msgid "Mounted\n"
msgstr "已掛載\n"

#: diskdrake/interactive.pm:1195
#, c-format
msgid "RAID %s\n"
msgstr "磁碟陣列 %s\n"

#: diskdrake/interactive.pm:1197
#, c-format
msgid ""
"Loopback file(s):\n"
"   %s\n"
msgstr ""
"loopback 檔案：\n"
"   %s\n"

#: diskdrake/interactive.pm:1198
#, c-format
msgid ""
"Partition booted by default\n"
"    (for MS-DOS boot, not for lilo)\n"
msgstr ""
"預設開機的分割區\n"
"    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"

#: diskdrake/interactive.pm:1200
#, c-format
msgid "Level %s\n"
msgstr "階層 %s\n"

#: diskdrake/interactive.pm:1201
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "組塊大小 %d KiB\n"

#: diskdrake/interactive.pm:1202
#, c-format
msgid "RAID-disks %s\n"
msgstr "磁碟陣列-磁碟 %s\n"

#: diskdrake/interactive.pm:1204
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback 檔案名稱： %s"

#: diskdrake/interactive.pm:1207
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"可能是這樣的，這個分割區\n"
"是透過驅動程式產生出來的\n"
"您應該不要去異動這個分割區資料。\n"

#: diskdrake/interactive.pm:1210
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"這個特殊分割區是用來作為\n"
"雙重開機使用的。\n"

#: diskdrake/interactive.pm:1227
#, c-format
msgid "Read-only"
msgstr "唯讀"

#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s\n"
msgstr "大小：%s\n"

#: diskdrake/interactive.pm:1229
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"

#: diskdrake/interactive.pm:1230
#, c-format
msgid "Info: "
msgstr "資訊："

#: diskdrake/interactive.pm:1231
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-磁碟 %s\n"

#: diskdrake/interactive.pm:1232
#, c-format
msgid "Partition table type: %s\n"
msgstr "硬碟分割表形式：%s\n"

#: diskdrake/interactive.pm:1233
#, c-format
msgid "on channel %d id %d\n"
msgstr "位在通道 %d id %d\n"

#: diskdrake/interactive.pm:1265
#, c-format
msgid "Filesystem encryption key"
msgstr "檔案系統加密金鑰"

#: diskdrake/interactive.pm:1266
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "選擇您檔案系統所使用的加密金鑰"

#: diskdrake/interactive.pm:1269
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"

#: diskdrake/interactive.pm:1270
#, c-format
msgid "The encryption keys do not match"
msgstr "輸入的加密金鑰不符合"

#: diskdrake/interactive.pm:1273
#: network/netconnect.pm:1136
#: standalone/drakconnect:397
#, c-format
msgid "Encryption key"
msgstr "加密金鑰"

#: diskdrake/interactive.pm:1274
#, c-format
msgid "Encryption key (again)"
msgstr "再次輸入加密金鑰"

#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "改變分割區格式"

#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "無法使用 %s 使用者名稱登入系統 (密碼錯誤?)"

#: diskdrake/smbnfs_gtk.pm:167
#: diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "需要 Domain 認證"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "那個使用者名稱"

#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "另外一個"

#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid "Please enter your username, password and domain name to access this host."
msgstr "請輸入你的使用者名稱，密碼以及網域名稱，以便於能夠連線存取這個主機。"

#: diskdrake/smbnfs_gtk.pm:179
#: standalone/drakbackup:3494
#, c-format
msgid "Username"
msgstr "使用者名稱"

#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "搜尋伺服器"

#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "搜尋新的伺服器"

#: do_pkgs.pm:16
#: do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "需要安裝 %s 這個套件，您要安裝它嗎？"

#: do_pkgs.pm:21
#: do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "必要的 %s 套件遺失"

#: do_pkgs.pm:172
#, c-format
msgid "Installing packages..."
msgstr "正在安裝套件..."

#: do_pkgs.pm:217
#, c-format
msgid "Removing packages..."
msgstr "正在移除套件..."

#: fs.pm:487
#: fs.pm:536
#, c-format
msgid "Mounting partition %s"
msgstr "正在掛載分割區 %s"

#: fs.pm:488
#: fs.pm:537
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗"

#: fs.pm:508
#: fs.pm:515
#, c-format
msgid "Checking %s"
msgstr "檢查 %s"

#: fs.pm:553
#: partition_table.pm:391
#, c-format
msgid "error unmounting %s: %s"
msgstr "卸下 %s 的掛載時發生錯誤：%s"

#: fs.pm:585
#, c-format
msgid "Enabling swap partition %s"
msgstr "正在啟用 swap 分割區 %s"

#: fs/format.pm:44
#: fs/format.pm:51
#, c-format
msgid "Formatting partition %s"
msgstr "正在格式化分割區 %s"

#: fs/format.pm:48
#, c-format
msgid "Creating and formatting file %s"
msgstr "建立並格式化檔案 %s"

#: fs/format.pm:83
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "不知道要如何將 %s 格式化為 %s 格式"

#: fs/format.pm:88
#: fs/format.pm:90
#, c-format
msgid "%s formatting of %s failed"
msgstr "以 %s 格式化 %s 失敗"

#: fs/mount_options.pm:112
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""

#: fs/mount_options.pm:115
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""

#: fs/mount_options.pm:118
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""

#: fs/mount_options.pm:120
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""

#: fs/mount_options.pm:124
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""

#: fs/mount_options.pm:128
#, c-format
msgid "Mount the file system read-only."
msgstr "以唯讀方式掛載檔案系統。"

#: fs/mount_options.pm:130
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""

#: fs/mount_options.pm:134
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"允許一般使用者掛載檔案系統。\n"
"掛載的使用者名稱會被寫入 mtab 因此他可以卸載檔案系統。\n"
"這個選項套用了 noexec、nosuid 以及 nodev 的參數\n"
"(除非被以下參數複寫，例如選項行 user、exec、dev、suid 參數)。"

#: fs/mount_options.pm:142
#, c-format
msgid "Give write access to ordinary users"
msgstr "授予寫入權限給一般使用者"

#: fs/mount_options.pm:144
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "授予唯讀權限給一般使用者"

#: fs/type.pm:370
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "小於 16MB 的分割區不能使用 JFS 格式"

#: fs/type.pm:371
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式"

#: fsedit.pm:25
#, c-format
msgid "with /usr"
msgstr "掛載為 /usr"

#: fsedit.pm:30
#, c-format
msgid "server"
msgstr "伺服器"

#: fsedit.pm:184
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""

#: fsedit.pm:401
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "掛載點必需以 / 開頭"

#: fsedit.pm:402
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "掛載點應該只有包含英文字母與數字與底線這類字元"

#: fsedit.pm:403
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "已經有分割區分配到掛載點 %s 了\n"

#: fsedit.pm:405
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"你已經選擇了一塊軟體磁碟陣列的分割區當作為根分割區 (/) 的掛載點。\n"
"沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
"請確定會增加一個 /boot 分割區"

#: fsedit.pm:408
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "您不能使用 LVM Logical Volume 來作為 %s 的掛載點"

#: fsedit.pm:410
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"你已經選擇了一塊 LVM Logical Volume 當作為根分割區 (/) 的掛載點。\n"
"沒有 /boot 分割區，開機載入程式不可能處理這種情況。\n"
"請確定會增加一個 /boot 分割區"

#: fsedit.pm:413
#, c-format
msgid "You may not be able to install lilo (since lilo does not handle a LV on multiple PVs)"
msgstr ""

#: fsedit.pm:416
#: fsedit.pm:418
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "這個目錄應該放在根檔案系統 (/) 才對"

#: fsedit.pm:420
#: fsedit.pm:422
#, c-format
msgid "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount point\n"
msgstr "您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"

#: fsedit.pm:424
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"

#: fsedit.pm:485
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "沒有足夠的空間來進行自動配置"

#: fsedit.pm:487
#, c-format
msgid "Nothing to do"
msgstr "沒有做任何動作"

#: harddrake/data.pm:61
#: install_any.pm:1505
#, c-format
msgid "Floppy"
msgstr "軟碟片"

#: harddrake/data.pm:71
#, c-format
msgid "Zip"
msgstr "Zip"

#: harddrake/data.pm:81
#: install_any.pm:1506
#, c-format
msgid "Hard Disk"
msgstr "硬碟"

#: harddrake/data.pm:90
#: install_any.pm:1507
#, c-format
msgid "CDROM"
msgstr "光碟機"

#: harddrake/data.pm:100
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD 燒錄器"

#: harddrake/data.pm:110
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"

#: harddrake/data.pm:120
#: standalone/drakbackup:2051
#, c-format
msgid "Tape"
msgstr "磁帶"

#: harddrake/data.pm:129
#, c-format
msgid "Videocard"
msgstr "顯示卡"

#: harddrake/data.pm:139
#, c-format
msgid "Tvcard"
msgstr "電視卡"

#: harddrake/data.pm:148
#, c-format
msgid "Other MultiMedia devices"
msgstr "其他多媒體裝置"

#: harddrake/data.pm:157
#, c-format
msgid "Soundcard"
msgstr "音效卡"

#: harddrake/data.pm:166
#, c-format
msgid "Webcam"
msgstr "網路攝影機"

#: harddrake/data.pm:180
#, c-format
msgid "Processors"
msgstr "處理器"

#: harddrake/data.pm:190
#, c-format
msgid "ISDN adapters"
msgstr "ISDN 介面卡"

#: harddrake/data.pm:200
#, c-format
msgid "Ethernetcard"
msgstr "乙太網路介面卡"

#: harddrake/data.pm:218
#: network/netconnect.pm:518
#, c-format
msgid "Modem"
msgstr "數據機"

#: harddrake/data.pm:228
#, c-format
msgid "ADSL adapters"
msgstr "ADSL 介面卡"

#: harddrake/data.pm:242
#, c-format
msgid "Memory"
msgstr "記憶體"

#: harddrake/data.pm:251
#, c-format
msgid "AGP controllers"
msgstr "AGP 控制器"

#: harddrake/data.pm:260
#: help.pm:186
#: help.pm:855
#: install_steps_interactive.pm:978
#, c-format
msgid "Printer"
msgstr "印表機"

#: harddrake/data.pm:270
#, c-format
msgid "Joystick"
msgstr "搖桿"

#: harddrake/data.pm:280
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA 控制器"

#: harddrake/data.pm:289
#, c-format
msgid "SATA controllers"
msgstr "SATA 控制器"

#: harddrake/data.pm:298
#, c-format
msgid "Firewire controllers"
msgstr "Firewire 控制器"

#: harddrake/data.pm:307
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA 控制器"

#: harddrake/data.pm:316
#, c-format
msgid "SCSI controllers"
msgstr "SCSI 控制器"

#: harddrake/data.pm:325
#, c-format
msgid "USB controllers"
msgstr "USB 控制器"

#: harddrake/data.pm:334
#, c-format
msgid "USB ports"
msgstr "USB 埠"

#: harddrake/data.pm:343
#, c-format
msgid "SMBus controllers"
msgstr "SMBus 控制器"

#: harddrake/data.pm:352
#, c-format
msgid "Bridges and system controllers"
msgstr "橋樑與系統控制器"

#: harddrake/data.pm:361
#, c-format
msgid "UPS"
msgstr "UPS"

#: harddrake/data.pm:370
#: help.pm:855
#: install_steps_interactive.pm:118
#: install_steps_interactive.pm:938
#: standalone/keyboarddrake:28
#, c-format
msgid "Keyboard"
msgstr "鍵盤"

#: harddrake/data.pm:383
#: help.pm:855
#: install_steps_interactive.pm:971
#, c-format
msgid "Mouse"
msgstr "滑鼠"

#: harddrake/data.pm:397
#, c-format
msgid "Scanner"
msgstr "掃描器"

#: harddrake/data.pm:407
#: standalone/harddrake2:439
#, c-format
msgid "Unknown/Others"
msgstr "未知/其他"

#: harddrake/data.pm:435
#, c-format
msgid "cpu # "
msgstr "CPU 編號"

#: harddrake/sound.pm:191
#: standalone/drakconnect:169
#: standalone/drakconnect:615
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "請稍待... 正在套用該設定"

#: harddrake/sound.pm:227
#, c-format
msgid "No alternative driver"
msgstr "無另外可供選擇的驅動程式"

#: harddrake/sound.pm:228
#, c-format
msgid "There's no known OSS/ALSA alternative driver for your sound card (%s) which currently uses \"%s\""
msgstr ""
"目前沒有另外可供選擇的 OSS/ALSA 驅動程式支援你的音效卡 (%s)\n"
"正在使用 \"%s\""

#: harddrake/sound.pm:234
#, c-format
msgid "Sound configuration"
msgstr "音效設定"

#: harddrake/sound.pm:236
#, c-format
msgid "Here you can select an alternative driver (either OSS or ALSA) for your sound card (%s)."
msgstr "您可以選擇使用另外的 (OSS 或者 ALSA) 的驅動程式給您的音效卡 (%s)"

#. -PO: here the first %s is either "OSS" or "ALSA",
#: harddrake/sound.pm:241
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is \"%s\")"
msgstr ""
"\n"
"\n"
"您的卡現在正在使用 %s\"%s\" 驅動程式 (您的卡預設驅動程式為 \"%s\")"

#: harddrake/sound.pm:243
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent sound API (it's available on most UNIX(tm) systems) but it's a very basic and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using the ALSA library.\n"
msgstr ""

#: harddrake/sound.pm:257
#: harddrake/sound.pm:342
#: standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "驅動程式："

#: harddrake/sound.pm:262
#, c-format
msgid "Trouble shooting"
msgstr "疑難排解"

#: harddrake/sound.pm:270
#: keyboard.pm:391
#: lang.pm:1039
#: network/netconnect.pm:504
#: printer/printerdrake.pm:1142
#: printer/printerdrake.pm:2142
#: printer/printerdrake.pm:2228
#: printer/printerdrake.pm:2274
#: printer/printerdrake.pm:2341
#: printer/printerdrake.pm:2376
#: printer/printerdrake.pm:2684
#: printer/printerdrake.pm:2691
#: printer/printerdrake.pm:3643
#: printer/printerdrake.pm:3970
#: printer/printerdrake.pm:4092
#: printer/printerdrake.pm:5183
#: standalone/drakTermServ:325
#: standalone/drakTermServ:1111
#: standalone/drakTermServ:1172
#: standalone/drakTermServ:1821
#: standalone/drakbackup:510
#: standalone/drakbackup:609
#: standalone/drakboot:165
#: standalone/drakclock:224
#: standalone/drakconnect:971
#: standalone/drakfloppy:291
#: standalone/drakups:27
#: standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "警告"

#: harddrake/sound.pm:270
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""

#: harddrake/sound.pm:278
#, c-format
msgid "No open source driver"
msgstr "無開放原始碼的驅動程式"

#: harddrake/sound.pm:279
#, c-format
msgid "There's no free driver for your sound card (%s), but there's a proprietary driver at \"%s\"."
msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"."

#: harddrake/sound.pm:282
#, c-format
msgid "No known driver"
msgstr "無已知的驅動程式"

#: harddrake/sound.pm:283
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)"

#: harddrake/sound.pm:287
#, c-format
msgid "Unknown driver"
msgstr "未知的驅動程式"

#: harddrake/sound.pm:288
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "錯誤：您的音效卡驅動程式 \"%s\" 沒有列出"

#: harddrake/sound.pm:302
#, c-format
msgid "Sound trouble shooting"
msgstr "音效問題排除"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:305
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""

#: harddrake/sound.pm:331
#, c-format
msgid "Let me pick any driver"
msgstr "讓我選擇任何驅動程式"

#: harddrake/sound.pm:334
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "正在選擇任意的驅動程式"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:337
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"如果您真的認為您知道您音效卡應該使用那個驅動程式\n"
"您可以在上面的列表中自己選取。\n"
"\n"
"目前您的音效卡 \"%s\" 使用的驅動程式是 \"%s\"。"

#: harddrake/v4l.pm:14
#, c-format
msgid "Auto-detect"
msgstr "自動偵測"

#: harddrake/v4l.pm:72
#: harddrake/v4l.pm:235
#, c-format
msgid "Unknown|Generic"
msgstr "未知|一般"

#: harddrake/v4l.pm:105
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "未知|CPH05X (bt878) [許多廠商]"

#: harddrake/v4l.pm:106
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "未知|CPH06X (bt878) [許多廠商]"

#: harddrake/v4l.pm:309
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types here. Just select your tv card parameters if needed."
msgstr ""
"對於目前大部分的電視卡，GNU/Linux 核心的 bttv 模組都能夠正確的偵測正確的參數。\n"
"若是無法正確偵測您的電視卡的話，您可以在這邊直接指定正確的電視頻道與電視卡型號。若需要的話請直接選擇您的電視卡卡參數。"

#: harddrake/v4l.pm:312
#, c-format
msgid "Card model:"
msgstr "卡模組："

#: harddrake/v4l.pm:313
#, c-format
msgid "Tuner type:"
msgstr "調頻類型："

#: harddrake/v4l.pm:314
#, c-format
msgid "Number of capture buffers:"
msgstr "擷取緩衝的數量："

#: harddrake/v4l.pm:314
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr ""

#: harddrake/v4l.pm:316
#, c-format
msgid "PLL setting:"
msgstr "PLL 設定："

#: harddrake/v4l.pm:317
#, c-format
msgid "Radio support:"
msgstr "音效支援："

#: harddrake/v4l.pm:317
#, c-format
msgid "enable radio support"
msgstr "啟用音效支援"

#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandrakelinux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"在繼續之前，您應該仔細的閱讀下面相關版權條款。\n"
"這包含整個 Mandrakelinux 發行版的版權內容。若是您同意裡面的所有條款，\n"
"請點選 \"%s\" 按鈕，否則請點選 \"%s\" 按鈕並自動重新開機。"

#: help.pm:14
#: install_steps_gtk.pm:552
#: install_steps_interactive.pm:92
#: install_steps_interactive.pm:731
#: standalone/drakautoinst:216
#, c-format
msgid "Accept"
msgstr "接受"

#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux 是一個多使用者的系統, 簡單說每個使用者都有其獨立的\n"
"喜好設定, 他們的檔案等等. 您可以閱讀 ``Starter Guide 初學者導覽''\n"
"以便於學習有關多使用者系統. 不同於系統管理者 \"root\"\n"
"此時你新增的使用者將不被授權於改變除了他們的檔案\n"
"與設定, 以保護系統免於非故意的或惡意的\n"
"對系統造成衝擊的改變. 您需要建立至少\n"
"一個一般使用者給你自己 -- 這是你應該用於\n"
"一般日常操作的帳號. 雖然這是非常容易以 root\n"
"登入來做任何事與全部的事, 這也是非常危險的! 一個\n"
"非常簡單的錯誤可能造成系統將再也不能正常工作. 若\n"
"你以一般使用者的身份犯了一連串的錯誤, 最糟的情況將是\n"
"你遺失某些資訊, 但是不影響整個系統.\n"
"\n"
"第一行問你一真實名稱. 當然這並非必要\n"
"-- 你事實上可以輸入任何你喜歡的. DrakX 將會用你打於此行\n"
"的地一個字且複製它到 \"%s\" 行, 使用者將輸入\n"
"以登入系統的名稱. 入你喜歡, 你可以推翻\n"
"預設值且改變使用者名稱. 下一步是輸入一個密碼.\n"
"以安全性觀點來看, 一個沒有特權(一般)使用者密碼是\n"
"沒有 \"root\" 密碼來的重要, 但是這不構成理由以\n"
"使它空白或過於簡單來忽略它: 畢竟您的檔案可能是\n"
"於危險中.\n"
"\n"
"一旦您點選 \"%s\", 您可以新增其他使用者. 新增使用者給你的\n"
"每一個朋友: 例如您的父親或姊妹. 當你已經完成\n"
"新增使用者, 點選 \"%s\" .\n"
"\n"
"點選 \"%s\" 按鈕允許您改變預設 \"shell 貝殼命令列\" 給\n"
"那位使用者 (預設為bash).\n"
"\n"
"當你已經完成新增使用者, 你將會被要求選擇一\n"
"電腦開機時可以自動登入系統的使用者. 若\n"
"你對那個特色有興趣 (且不太關心本地端\n"
"安全性), 選擇希望的使用者與視窗管理員, 然後點選 \"%s\".\n"
"若你對這個特色有沒有興趣, 不選取 \"%s\" 盒子."

#: help.pm:51
#: printer/printerdrake.pm:1595
#: printer/printerdrake.pm:1715
#, c-format
msgid "User name"
msgstr "使用者名稱"

#: help.pm:51
#: help.pm:431
#: help.pm:681
#: install_steps_gtk.pm:233
#: install_steps_gtk.pm:689
#: interactive.pm:424
#: interactive/newt.pm:317
#: network/netconnect.pm:278
#: network/tools.pm:182
#: printer/printerdrake.pm:3581
#: standalone/drakTermServ:382
#: standalone/drakbackup:3946
#: standalone/drakbackup:4040
#: standalone/drakbackup:4057
#: standalone/drakbackup:4075
#: ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "下一步"

#: help.pm:51
#: help.pm:409
#: help.pm:431
#: help.pm:647
#: help.pm:722
#: interactive.pm:385
#, c-format
msgid "Advanced"
msgstr "進階"

#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"目前所列出來的是硬碟機上偵測到已經存在的 Linux 分割區.\n"
"您可以保留巫師模式做的選擇, 因為他們對一般安裝是不錯的.\n"
"如果您做任何改變的話, 您至少要定義出一塊當作根分割區 (\"/\").\n"
"別選擇一個太小的分割區, 否則您將無法安裝足夠的軟體.\n"
"如果您想儲存您的資料到一個分離的分割區, 你需要建立一個\"/home\" 分割區\n"
"(只在您有多於一個 Linux 分割區情況下才可能).\n"
"\n"
"下列每個分割區都列出了: \"名稱\", \"容量\".\n"
"\n"
"\"名稱\" 都是有統一的命名方式: \"硬碟類型\", \"硬碟編號\", \n"
"\"分割區編號\" (例如, \"hda1\").\n"
"\n"
"\"硬碟類型\" 部份, IDE 硬碟使用 \"hd\", SCSI 則是 \"sd\".\n"
"\"硬碟編號\" 部份, 伴隨在 \"hd\" 或者是 \"sd\" 後面:\n"
"\n"
" * \"a\" 這是指 \"primary IDE controller 上第一台 (master) 硬碟\",\n"
"\n"
" * \"b\" 這是指 \"primmary IDE controller 上第二台 (slave) 硬碟\",\n"
"\n"
" * \"c\" 這是指 \"secondary IDE controller 上第一台 (master) 硬碟\",\n"
"\n"
" * \"d\" 這是指 \"secondary IDE controller 上第二台 (slave) 硬碟\".\n"
"\n"
"以 SCSI 硬碟來說, \"a\" 就是指 \"SCSI ID 編號最小的那一台\", \"b\"\n"
"就是指 \"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去."

#: help.pm:85
#, c-format
msgid ""
"The Mandrakelinux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandrakelinux 安裝片包含數張光碟片. 若一所選擇的套件是位於另一張光碟,\n"
"DrakeX 會彈出現在的光碟且要求您放入所要求的正確光碟片.\n"
"若您沒有要求的光碟在手上的話, 就按下 \"%s\", 對應的套件不會被安裝."

#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandrakelinux, and to make it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandrakelinux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
"   Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"現在是指定那個程式您想要裝在您的系統上. Mandrakelinux 有上千個套件,\n"
"為了簡單管理, 相似性質的應用程式已經被分類到群組裡.\n"
"\n"
"Mandrakelinux 分類套件群組於四個範疇. 你能由不同範疇混合與配對應用程式,\n"
"所以一個 ``工作站''安裝也能安裝``伺服器''範疇安裝的應用程式.\n"
"\n"
" * \"%s\": 如果您計畫用您的機器當作一個工作站, 選擇一個或\n"
"更多的群組於工作站範疇.\n"
"\n"
" * \"%s\": 如果您計畫用您的機器來程式設計, 選擇適當\n"
"的群組於那個範疇. 特別的 \"LSB\" 群組將設定您的系統使之盡量符合\n"
"Linux Standard Bases 規範.\n"
"\n"
"   選擇 \"LSB\" 群組除了預設的 \"2.6\" 也將安裝 \"2.4\" 核心系列,\n"
"這是確保系統的 100%%-LSB compliance. 可是, 如果您不選擇 \"LSB\"\n"
"群組您仍然將有一個幾乎 100%% LSB-compliant 的系統.\n"
"\n"
" * \"%s\": 如果您的機器是要用作伺服器, 選擇那一個\n"
"更常用的服務您想裝在系統上.\n"
"\n"
" * \"%s\": 這是您選擇您的偏好的圖形環境的地方.\n"
"如果您像要有圖形介面可用, 至少一個要被選擇.\n"
"\n"
"移動滑鼠游標到一個群組上方將顯示一段關於該群組簡短的解釋文字\n"
"text about that group.\n"
"\n"
"你能選取 \"%s\" 方塊盒, 若您對所提供的套件熟悉或您想要有對於什麼\n"
"將被安裝有全部控制, 這將會有用\n"
"\n"
"若您用 \"%s\" 模式開始安裝, 你可以取消選擇全部群組且防止安裝任何新套件.\n"
"這對修復或更新一個已經存在的系統很有用.\n"
"\n"
"如果當您執行一個一般正常安裝, 您取消選擇全部群組 (相反於一個升級)，\n"
"一個對話方塊將會跳出建議不同的選項給最小安裝：\n"
"\n"
" * \"%s\"：安裝最少的套件來擁有可工作的圖形桌面。\n"
"\n"
" * \"%s\"：安裝系統基礎加上基本的工具與其文件\n"
"這種安裝適合於設定起來一個伺服器。\n"
"\n"
" * \"%s\"：將安裝絕對最少套件必要於使一個 Linux 系統工作。\n"
"用這個安裝您將只擁有一個命令列介面. 全部安裝大小大約 65 MB。"

#: help.pm:146
#: share/compssUsers.pl:23
#, c-format
msgid "Workstation"
msgstr "工作站"

#: help.pm:146
#: share/compssUsers.pl:64
#: share/compssUsers.pl:162
#: share/compssUsers.pl:164
#, c-format
msgid "Development"
msgstr "程式開發"

#: help.pm:146
#: share/compssUsers.pl:144
#, c-format
msgid "Graphical Environment"
msgstr "圖形環境"

#: help.pm:146
#: install_steps_gtk.pm:231
#: install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "選取單一套件"

#: help.pm:146
#: help.pm:588
#, c-format
msgid "Upgrade"
msgstr "升級"

#: help.pm:146
#: install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "包含 X 環境"

#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "包含基本的說明文件"

#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "真的最小安裝"

#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandrakelinux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandrakelinux was\n"
"finalized. If you do not know what a particular service is supposed to do or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""

#: help.pm:180
#: help.pm:285
#: help.pm:313
#: help.pm:444
#: install_any.pm:792
#: interactive.pm:149
#: modules/interactive.pm:71
#: standalone/drakbackup:2508
#: standalone/draksec:54
#: standalone/harddrake2:306
#: standalone/net_applet:255
#: ugtk2.pm:899
#: wizards.pm:156
#, c-format
msgid "No"
msgstr "否"

#: help.pm:180
#: help.pm:285
#: help.pm:444
#: install_any.pm:792
#: interactive.pm:149
#: modules/interactive.pm:71
#: printer/printerdrake.pm:736
#: standalone/drakbackup:2508
#: standalone/drakgw:287
#: standalone/drakgw:288
#: standalone/drakgw:296
#: standalone/drakgw:306
#: standalone/draksec:55
#: standalone/harddrake2:305
#: standalone/net_applet:259
#: ugtk2.pm:899
#: wizards.pm:156
#, c-format
msgid "Yes"
msgstr "是的"

#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "自動相依性"

#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""

#: help.pm:186
#: help.pm:566
#: help.pm:855
#: install_steps_gtk.pm:607
#: standalone/drakbackup:2333
#: standalone/drakbackup:2337
#: standalone/drakbackup:2341
#: standalone/drakbackup:2345
#, c-format
msgid "Configure"
msgstr "設定"

#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"這個對話視窗用來選擇你打算於啟動系統時執行運作的服務.\n"
"\n"
"DrakX 將列出在現在安裝上可選擇的服務項目. 仔細詳細回顧查看每一個\n"
"且取消選取那些開機時不會用到的.\n"
"\n"
"當你選取該項目時, 會出現一個簡略說明文字. 但是若是您對於該項目\n"
"實在不確定是否要啟用的話, 比較安全的作法就是維持原樣不要動作即可.\n"
"\n"
"!! 在這階段, 請小心如果您這台機器是要當作伺服器: 您大概不想要\n"
"開啟那些您不用的服務. 請記得某些服務在伺服器上啟動後可能會有危險.\n"
"大致上只選那些你真正需要的服務. !!"

#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""

#: help.pm:217
#: install_steps_interactive.pm:873
#, c-format
msgid "Hardware clock set to GMT"
msgstr "硬體時鐘設定為 GMT 時間"

#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "自動時間同步"

#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"顯示卡\n"
"\n"
"   一般而言，安裝程式會自動偵測並設定安裝在您機器上的顯示\n"
"卡。如果偵測結果不正確，您可以由本清單中選取正確的型號。\n"
"\n"
"   如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D\n"
"加速功能)，請您選擇一個最符合您需求的伺服器來使用。"

#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandrakelinux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
"   The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
"   In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
"   Depending on your hardware, this entry might not appear.\n"
"\n"
"   The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""

#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
"   Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"螢幕\n"
"\n"
"    一般來說，安裝程式會自動偵測並設定連接到您電腦的螢幕。如果它不正確\n"
"，您可以由此列表中選取連結到您電腦的螢幕。"

#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
"   Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"解析度\n"
"\n"
"    在這裡您可以選擇您顯示卡可以使用的解析度與色深。請選取最適合您的設定值\n"
"(您可以在安裝完成之後更改)。您選取的設定值的樣本將顯示在螢幕圖片上。"

#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"如果有不同的伺服器可以與您的顯示卡搭配使用 (有或沒有 3D加速\n"
"功能)，請您選擇一個最符合您需求的伺服器來使用。"

#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
"   This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"選項\n"
"\n"
"   這個步驟允許您選擇是否想要您的機器開機時自動跳到圖形介.\n"
"顯然地, 如果您的機器是當作一個伺服器或您不能成功地設定顯示,\n"
"您想核對選取 \"%s\"."

#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandrakelinux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandrakelinux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandrakelinux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
"   Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandrakelinux system, choose\n"
"this option. Be careful, because you will not be able to undo this operation\n"
"after you confirm.\n"
"\n"
"   !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
"   !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"您需要決定那裡你想要安裝 Mandrakelinux\n"
"作業系統於那個硬碟. 如果您的硬碟是全新尚未使用或\n"
"已經存在的作業系統正在使用全部可被利用的空間, 您將\n"
"必須進行分割硬碟的動作. 基本上, 分割硬碟的動作包含\n"
"邏輯上劃分它以建立需要的空間來安裝您的新\n"
"Mandrakelinux 系統.\n"
"\n"
"因為分割硬碟的動作程序通常是無法回復的\n"
"且能導致資料遺失, 若您是一位不熟練的使用者,\n"
"割硬碟的動作是脅迫恫嚇與充滿著緊張壓力的. 幸運的是\n"
"DrakX 包含巫師模式以簡化這程序. 於繼續此步驟前,\n"
"先詳細閱讀其他部份與全部, 慢慢來.\n"
"\n"
"根據您的硬碟設定值, 有數個選項可用:\n"
"\n"
" * \"%s\". 該項目將會執行自動劃分您空白的磁碟.\n"
"若您使用此選項, 將沒有進一步的提示.\n"
"\n"
" * \"%s\". 巫師模式已經偵測一個或更多已經存在的 Linux 硬碟\n"
"分割. 若您想要使用他們, 選此選項. 您將會\n"
"被要求選擇關於每一個分割的掛載點.\n"
"就有的掛載點預設為被選擇, 且大部分最好保留\n"
"他們.\n"
"\n"
" * \"%s\". 若您硬碟有安裝 Microsoft Windows 且佔據\n"
"全部可用剩餘可用的空間, 您將必須建立自由空間給\n"
"GNU/Linux. 為了達到目的, 您可以刪除 Microsoft Windows 分割與資料\n"
"(見 ``Erase entire disk (消除整個磁碟)'' 解決方案) 或是\n"
"重新調整 Microsoft Windows FAT 或 NTFS 分割區大小.\n"
"若您已經 defragment(不連續碎片重新整理) Windows 分割\n"
"且它用 FAT 格式.重新調整分割可以被執行於不遺失任何資料\n"
"資料備份是被強烈建議的. 若您想要使用 Mandrakelinux and Microsoft\n"
"Windows 於同一台電腦, 使用此選項是被建議的.\n"
"\n"
"   選擇此選項前, 請了解當使用這個過程項目後, Microsoft Windows\n"
"分割可用的剩餘空間將會比之前減少. 您將有較少的自由空間於\n"
" Microsoft Windows 來存您的資料與安裝新軟體.\n"
"\n"
" * \"%s\". 如果您想要刪除全部現存於您的硬碟上資料與\n"
"分割且以您的新 Mandrakelinux 系統替換他們,\n"
"選此選項. 但是小心使用, 你將無法於你確認之後\n"
"逆反你的決定.\n"
"\n"
"   !! 若你選此選項, 全部於你的磁碟上的資料將會被刪除. !!\n"
"\n"
" * \"%s\". 當硬碟完全被 Microsoft Windows 佔據時出現此選項.\n"
"選擇此選項將會簡單地消除一切於磁碟中的資料且從新開始,\n"
"從頭開始分割一切.\n"
"\n"
"   !! 若你選此選項, 全部於你的磁碟上的資料將會遺失. !!\n"
"\n"
" * \"%s\". 選這個選項若您想要手動分割您的硬碟.\n"
"請小心使用 -- 它是強力的但是危險的選擇且您可能非常\n"
"容易遺失您的全部資料. 這是為何此選項事實上只於\n"
"您曾經做過類似於此且有些許經驗的時候被建議.\n"
"更多指令於如何使用 DiskDrake 工具, 指向\n"
"``Starter Guide (初學者指導)''的\n"
"``Managing Your Partitions (管理您的分割)'' 部份."

#: help.pm:374
#: install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "使用未用到的空間"

#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "使用已經存在的分割區"

#: help.pm:374
#: install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "使用 Windows 分割區所剩餘的可用空間"

#: help.pm:374
#: install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "刪除所有磁碟內容"

#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "移除 Windows"

#: help.pm:374
#: install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "自訂磁碟分割"

#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
"   Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
"    * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
"    * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
"   This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"整個安裝步驟到這裡代表您安裝已經完成了且 GNU/Linux 系統準備好被使用.\n"
"只要點選 \"%s\" 來重新啟動系統. 別忘了移除安裝媒介 (光碟或軟片).\n"
"於您的電腦完成硬體測試後您第一個見到的是開機載入程式選單,\n"
"給您開始那個作業系統的選擇\n"
" \"%s\" 按鈕顯示另兩個按鈕到:\n"
"\n"
"* \"%s\": 使您建立一個安裝軟片, 一張不需要操作手的幫助\n"
"就能夠自動執行全部安裝的軟片, 類似於您剛剛設定的安裝一樣.\n"
"\n"
"   注意按下那個按鈕後有兩個不同的選項可供選擇:\n"
"\n"
"    * \"%s\". 這是半自動安裝方式, 磁碟分割項目將是唯一維持手動方式操作.\n"
"\n"
"    * \"%s\". 這是全自動的安裝方式: 硬碟將完全被重新寫入, 全部資料遺失.\n"
"\n"
"   這功能對於需要大量安裝很多相似機器上的話來說這是相當實用.\n"
"可以參考我們網頁上自動安裝章節的更多資訊.\n"
"\n"
" * \"%s\"(*): 儲存一個於這安裝時選擇的套件清單.\n"
"要用這些選擇於另一個安裝, 插入軟片且開始安裝. 於提示時按下 F1 按鍵,\n"
"然後輸入 >>linux defcfg=\"floppy\"<< 按下 [Enter] 鍵.\n"
"\n"
"(*) 您需要一個 FAT-formatted 軟片. 要建立一張於於GNU/Linux 環境下,\n"
"鍵入 \"mformat a:\", 或 \"fdformat /dev/fd0\" 然後 \"mkfs.vfat /dev/fd0\"."

#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "產生自動安裝軟片"

#: help.pm:409
#: install_steps_interactive.pm:1328
#, c-format
msgid "Replay"
msgstr "重播"

#: help.pm:409
#: install_steps_interactive.pm:1328
#, c-format
msgid "Automated"
msgstr "自動化"

#: help.pm:409
#: install_steps_interactive.pm:1331
#, c-format
msgid "Save packages selection"
msgstr "儲存套件選擇"

#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandrakelinux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"如果您選擇去重新使用某些 GNU/Linux 分割, 您或許想要重新格式化他們\n"
"且抹去任何他們包含的資料. 要的話, 請選擇那些分割.\n"
"請注意一下, 並不是所有先前已經存在的分割區都得重新格式化,\n"
"您必須重新格式化包含作業系統的分割 (例如 \"/\", \"/usr\" or \"/var\")\n"
"但是您不需要重新格式化包含您想保留資料的分割 (通常是 \"/home\").\n"
"\n"
"請小心選擇分割. 當格式化完成時, 全部在選擇分割上得資料將被刪除且\n"
"您將不行重新恢復它.\n"
"當您準備好要格式化此分割, 點選 \"%s\".\n"
"\n"
"若您想選擇另一個分割給您的新的 Mandrakelinux 作業系統安裝, 點選了\"%s\".\n"
"若您想選擇要被檢查磁碟上壞的區塊的分割, 點選.\"%s\"."

#: help.pm:431
#: install_steps_gtk.pm:388
#: interactive.pm:425
#: interactive/newt.pm:316
#: printer/printerdrake.pm:3579
#: standalone/drakTermServ:361
#: standalone/drakbackup:3906
#: standalone/drakbackup:3945
#: standalone/drakbackup:4056
#: standalone/drakbackup:4071
#: ugtk2.pm:504
#, c-format
msgid "Previous"
msgstr "上一步"

#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandrakelinux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"此時您安裝 Mandrakelinux 時, 或許自從初始釋出的某些套件將有更新.\n"
"臭蟲或許已經修正了, 安全性問題解決了. 為了允許您從這些更新中\n"
"獲得利益, 您現在可以由網際網路下載他們. 如果您有可用的網際網路連線,\n"
"選取 \"%s\", 或是, 如果您想稍後安裝更新套件, 選取 \"%s\".\n"
"\n"
"選擇 \"%s\" 將顯示一張更新可以被擷取的網站位置清單. 您應該選擇一個\n"
"跟您近的. 一個套件選擇樹將出現: 審查選擇, 按下 \"%s\" 來擷取且安裝\n"
"被選擇的套件, 或 \"%s\" 以中斷放棄."

#: help.pm:444
#: help.pm:588
#: install_steps_gtk.pm:387
#: install_steps_interactive.pm:156
#: standalone/drakbackup:4103
#, c-format
msgid "Install"
msgstr "安裝"

#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandrakelinux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"到這裡時, DrakX 將允許您選擇您想要的安全性等級給您的機器.\n"
"根據拇指規則, 若是機器將要有包含重要的資料, 或是直接暴露在網際網路,\n"
"安全性等級應該設定較高. 權衡之下, 較高的安全性等級換得不容易使用.\n"
"\n"
"如果您不知道選什麼, 保留預設選項. 您將能在稍後用 draksec 工具改變它,\n"
"draksec 是 Mandrakelinux 控制中心的一部分.用負責安全性的人的 e-mail 地址填入 \"%s\" 欄位. 安全性訊息將被寄到\n"
"那個位址."

#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "安全性管理員:"

#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandrakelinux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"在這個階段, 您需要選擇要用來安裝 Mandrakelinux 系統的分割區.\n"
"如果分割區已經被定義了, 不管是從舊有的 GNU/Linux 安裝或是\n"
"另一個處理分割區的工具, 您可以使用原本已經劃分好的分割區.\n"
"否則硬碟分割必須要被定義.\n"
"\n"
"要建立分割區, 您需要先選擇一台硬碟. 您可以選擇要操作的分割區, 按 ``hda''\n"
"為第一台 IDE 磁碟, ``hdb'' 為第二台, ``sda'' 為第一台 SCSI 磁碟等等.\n"
"\n"
"要進行分割的動作於選好的硬碟上, 您有這些項目可以使用:\n"
"\n"
" * \"%s\": 這個選項刪除在所選的影碟上的全部分割區\n"
"\n"
" * \"%s\": 這個選項使您自動建立 ext3 與 swap 分割區於您的硬碟上的空白空間\n"
"\n"
"\"%s\": 給多加的功能的使用:\n"
"\n"
" * \"%s\": 儲存分割表到軟片. 必要時對於分割表拯救有用. 強烈建議執行此步驟.\n"
"\n"
" * \"%s\": 允許您回存一個之前從軟片儲存的分割表\n"
"\n"
" * \"%s\": 如果您的分割表受損, 您可以試著用這個選項救回它.\n"
"請小心且記得這並非總是有效.\n"
"\n"
" * \"%s\": 丟棄全部改變且重新載入原始硬碟的分割表.\n"
"\n"
" * \"%s\": 不選取這個選項將強制使用者手動掛載與卸載可移除式媒介例如磁碟片與\n"
"光碟。\n"
"\n"
" * \"%s\": 如果您想用巫師來分割您的硬碟, 使用這個選項. 如果您沒有對於\n"
"操作分割的好的了解, 這是被建議的.\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": 用這個選項來取消您的變更.\n"
"\n"
" * \"%s\": 允許多加的動作於分割 (類型, 選項, 格式)且給更多的關於硬碟的資訊.\n"
"\n"
" * \"%s\": 當您完成分割您的硬碟, 這將儲存您的變更回磁碟.\n"
"\n"
"當定義一個分割的大小時, 您可以好好的用鍵盤上的方向鍵來設定分割大小.\n"
"\n"
"注意: 您可以用鍵盤達成任何選項. 用 [Tab] 鍵與上或下方向鍵瀏覽分割.\n"
"\n"
"當一個分個被選擇時, 您可以使用:\n"
"\n"
" * Ctrl-c 來建立一個新的分割 (當空白分割被選擇時)\n"
"\n"
" * Ctrl-d 來刪除一個分割\n"
"\n"
" * Ctrl-m 來設定掛載點\n"
"\n"
"要得到關於不同可用的檔案系統的資訊, 請從 ``Reference Manual (參考手冊)''\n"
"閱讀 ext2FS 章節.\n"
"\n"
"如果您正在安裝於一個 PPC 機器, 您將想要建立一個小的 HFS\n"
"``bootstrap'' 分割至少 1MB 以用於 yaboot 開機載入器. 如果您選擇使分割大一些,\n"
"像 50MB, 您或許發現它是一個好用的貯存一個備用核心與 ramdisk\n"
"影像給緊急使用開機的好地方."

#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "可移除式媒介自動掛載"

#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "切換一般/專家模式"

#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandrakelinux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"多於一個 Microsoft 分割區已經在您的硬碟上被偵測到. 請選擇您希望要重新調整 大小的分割以便安裝您的新的 Mandrakelinux 作業系統.\n"
"\n"
"每個分割區都列出了像是: \"Linux 名稱\", \"Windows 名稱\", \"容量\".\n"
"\n"
"\"Linux 名稱\" 是有結構性的: \"硬碟型態\", \"硬碟編號\", \"分割區編號\"\n"
"(比方像是: \"hda1\" ).\n"
"\n"
"\"硬碟型態\" 就是, 若您使用的是 IDE 硬碟, 會顯示 \"hd\", 若是SCSI硬碟的話,\n"
"就是 \"sd\".\n"
"\n"
"\"硬碟編號\" 就是在 \"hd\" 或者是 \"sd\" 後面的字母. 以 IDE 硬碟裝置來說:\n"
"\n"
" * \"a\"這是指 \"primary IDE controller 上第一台 (master) 硬碟\";\n"
"\n"
" * \"b\"這是指\"primmary IDE controller 上第二台 (slave) 硬碟\";\n"
"\n"
" * \"c\"這是指\"secondary IDE controller 上第一台 (master) 硬碟\";\n"
"\n"
" * \"d\"這是指\"secondary IDE controller 上第二台 (slave) 硬碟\".\n"
"\n"
"以 SCSI 硬碟來說, \"a\" 是指 \"SCSI ID 編號最小的那一台硬碟\", \"b\" 是指\"SCSI ID 編號為第二小的那一台硬碟\", 然後依此類推下去.....\n"
"\n"
"\"Windows 名稱\" 是在 Windows 下的磁碟機代號名稱 (第一個磁碟或分割稱為\n"
"\"C:\")."

#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""

#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandrakelinux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandrakelinux system. Your current partitioning\n"
"scheme and user data will not be altered. Most of the other configuration\n"
"steps remain available and are similar to a standard installation.\n"
"\n"
"Using the ``Upgrade'' option should work fine on Mandrakelinux systems\n"
"running version \"8.1\" or later. Performing an upgrade on versions prior\n"
"to Mandrakelinux version \"8.1\" is not recommended."
msgstr ""

#: help.pm:591
#, c-format
msgid ""
"Depending on the language you chose (), DrakX will automatically select a\n"
"particular type of keyboard configuration. Check that the selection suits\n"
"you or choose another keyboard layout.\n"
"\n"
"Also, you may not have a keyboard which corresponds exactly to your\n"
"language: for example, if you are an English-speaking Swiss native, you may\n"
"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
"you may find yourself in the same situation where your native language and\n"
"country-set keyboard do not match. In either case, this installation step\n"
"will allow you to select an appropriate keyboard from a list.\n"
"\n"
"Click on the \"%s\" button to be shown a list of supported keyboards.\n"
"\n"
"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
"dialog will allow you to choose the key binding which will switch the\n"
"keyboard between the Latin and non-Latin layouts."
msgstr ""
"根據您所選的語言 (), DrakX 將會自動選擇一個特別的鍵盤設定型態. 檢查所選擇的\n"
"符合您或選擇另一個鍵盤布局\n"
"\n"
"您或許沒有精確對應於您的語言的鍵盤: 例如, 如果您是一個說英文的瑞士本國人,\n"
"您或許有瑞士鍵盤. 或如果您說英文且在魁北克 (Quebec), 您或許發現您自己在一個\n"
"您本國語言與國家鍵盤組合不對稱的情況. 不管是那種情形, 這個安裝步驟將允許您\n"
"從一個清單中選擇適合的鍵盤\n"
"\n"
"點選 \"%s\" 按鈕以顯示一個支援的鍵盤清單.\n"
"\n"
"如果您根據一個非拉丁語系字母選擇一個鍵盤布局, 下一步對話視窗將允許您選擇\n"
"鍵捆綁以便切換於拉丁與非拉丁鍵盤布局之中."

#: help.pm:609
#, c-format
msgid ""
"The first step is to choose your preferred language.\n"
"\n"
"Your choice of preferred language will affect the installer, the\n"
"documentation, and the system in general. First select the region you're\n"
"located in, then the language you speak.\n"
"\n"
"Clicking on the \"%s\" button will allow you to select other languages to\n"
"be installed on your workstation, thereby installing the language-specific\n"
"files for system documentation and applications. For example, if Spanish\n"
"users are to use your machine, select English as the default language in\n"
"the tree view and \"%s\" in the Advanced section.\n"
"\n"
"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
"cover all existing languages. However full support for it in GNU/Linux is\n"
"still under development. For that reason, Mandrakelinux's use of UTF-8 will\n"
"depend on the user's choices:\n"
"\n"
" * If you choose a language with a strong legacy encoding (latin1\n"
"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
"iso-8859-2 languages), the legacy encoding will be used by default;\n"
"\n"
" * Other languages will use unicode by default;\n"
"\n"
" * If two or more languages are required, and those languages are not using\n"
"the same encoding, then unicode will be used for the whole system;\n"
"\n"
" * Finally, unicode can also be forced for use throughout the system at a\n"
"user's request by selecting the \"%s\" option independently of which\n"
"languages were been chosen.\n"
"\n"
"Note that you're not limited to choosing a single additional language. You\n"
"may choose several, or even install them all by selecting the \"%s\" box.\n"
"Selecting support for a language means translations, fonts, spell checkers,\n"
"etc. will also be installed for that language.\n"
"\n"
"To switch between the various languages installed on your system, you can\n"
"launch the \"localedrake\" command as \"root\" to change the language used\n"
"by the entire system. Running the command as a regular user will only\n"
"change the language settings for that particular user."
msgstr ""
"第一步驟是選擇您偏好的語言.\n"
"\n"
"您的偏好語言選擇將一般來說影響安裝, 文件, 與系統. 先選擇您在的區域, 然後\n"
"您說的語言.\n"
"\n"
"點選 \"%s\" 按鍵將允許您選擇其他語言來安裝在您的工作站上, 因此, 安裝特殊語言\n"
"檔案給系統文件與應用程式. 例如, 如果西班牙使用者會用您的機器, 在樹狀檢視中\n"
"選擇英文當預設語言且在進階部份選擇 \"%s\".\n"
"\n"
"關於 UTF-8 (unicode) 支援: Unicode 是一個新的字元編碼以含蓋全部存在的語言.\n"
"然而, 在 GNU/Linux 下完全的支援仍然在開發中. 因為那個原因, Mandrakelinux 的\n"
" UTF-8 使用將根據使用者的選擇:\n"
"\n"
" * 如果您選擇一個有強烈舊式編碼的語言 (latin1 語言, 俄羅斯, 日本, 中國,\n"
"韓國, 泰國, 希臘, 土耳其, 大多的 iso-8859-2 語言)\n"
"\n"
" * 其他語言將使用 unicode 為預設;\n"
"\n"
" * 如果兩個或兩個以上的語言被需要, 且那些語言不用相同的編碼, 則 unicode 將被用於\n"
"整個系統;\n"
"\n"
" * 最後, unicode 也可以被強制使用遍布系統, 藉由使用者的選擇 \"%s\" 選項\n"
"來要求之.\n"
"\n"
"記得您不被限制於選擇一個單一的附加語言. 您可以選擇數個, 或甚至藉由選擇\n"
" \"%s\" 方塊安裝他們全部. 選擇支援對語言來說是指翻譯, 字型, 拼字檢查等等,\n"
"將也會被安裝給那個語言.\n"
"為了切換於不同的安裝於您系統上的語言之間, 您可以用 \"root\" 發射\n"
"\"localedrake\" 命令來改變用於整個系統上的語言. 用一般使用者執行命令\n"
"將只會改變對於那個特別使用者的語言設定."

#: help.pm:647
#, c-format
msgid "Espanol"
msgstr ""

#: help.pm:650
#, c-format
msgid ""
"Usually, DrakX has no problems detecting the number of buttons on your\n"
"mouse. If it does, it assumes you have a two-button mouse and will\n"
"configure it for third-button emulation. The third-button mouse button of a\n"
"two-button mouse can be obtained by simultaneously clicking the left and\n"
"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
"a PS/2, serial or USB interface.\n"
"\n"
"If you have a 3-button mouse without a wheel, you can choose a \"%s\"\n"
"mouse. DrakX will then configure your mouse so that you can simulate the\n"
"wheel with it: to do so, press the middle button and move your mouse\n"
"pointer up and down.\n"
"\n"
"If for some reason you wish to specify a different type of mouse, select it\n"
"from the list provided.\n"
"\n"
"You can select the \"%s\" entry to chose a ``generic'' mouse type which\n"
"will work with nearly all mice.\n"
"\n"
"If you choose a mouse other than the default one, a test screen will be\n"
"displayed. Use the buttons and wheel to verify that the settings are\n"
"correct and that the mouse is working correctly. If the mouse is not\n"
"working well, press the space bar or [Return] key to cancel the test and\n"
"you will be returned to the mouse list.\n"
"\n"
"Occasionally wheel mice are not detected automatically, so you will need to\n"
"select your mouse from a list. Be sure to select the one corresponding to\n"
"the port that your mouse is attached to. After selecting a mouse and\n"
"pressing the \"%s\" button, a mouse image will be displayed on-screen.\n"
"Scroll the mouse wheel to ensure that it is activating correctly. As you\n"
"scroll your mouse wheel, you will see the on-screen scroll wheel moving.\n"
"Test the buttons and check that the mouse pointer moves on-screen as you\n"
"move your mouse about."
msgstr ""
"通常 DrakX 沒有偵測滑鼠按鍵數量的問題. 如果有的話, 它假設您有兩鍵的滑鼠\n"
"且將設定它模擬三鍵. 第三鍵按鍵於兩鍵滑鼠可以由同時按下左鍵與右鍵來模擬.\n"
"DrakX 將會自動知道您的滑鼠是否使用 PS/2, 序列埠 或 USB 介面.\n"
"\n"
" 如果您有一個無滾輪的三鍵滑鼠, 您可以選擇 \"%s\" 滑鼠. DrakX 將會設定您的\n"
"滑鼠以至於您可以用它模擬滾輪: 為了要使用它, 按下中間鍵且上下移動您的滑鼠指標.\n"
"\n"
"如果由於某些原因您想指定一個不同的滑鼠類型, 從提供的清單中選它.\n"
"\n"
"您可以選擇 \"%s\" 項目來選擇一個 ``generic (一般)'' 滑鼠型態, 適用於幾乎全部\n"
"的滑鼠.\n"
"\n"
"如果您選擇一個不同於預設值的滑鼠, 一個測試螢幕將會顯示. 使用案件與滾輪來\n"
"校驗設定值是正確的且滑鼠正確工作. 如果滑鼠不能工作, 按下空白鍵或 [Return] 鍵\n"
"以取消測試且您將回到滑鼠清單.\n"
"\n"
"某些情況下, 滾輪滑鼠不能被自動偵測, 所以您將需要從清單中選擇您的滑鼠.\n"
"確定選擇一個對應於您的滑鼠連接的埠的一項. 選擇一個滑鼠且按下 \"%s\" 鍵後,\n"
"一個滑鼠影像將顯示在螢幕上.\n"
" 請捲動滑鼠滾輪以確定它正確被驅動. 當您滾動\n"
"滑鼠滾輪, 您將看見螢幕上滾動滾輪移動.\n"
" 測試按鍵且檢查滑鼠指標當您移動\n"
"您的滑鼠時在螢幕上移動."

#: help.pm:681
#, c-format
msgid "with Wheel emulation"
msgstr "滾輪模擬"

#: help.pm:681
#, c-format
msgid "Universal | Any PS/2 & USB mice"
msgstr "通用 | 任何 PS/2 & USB 滑鼠"

#: help.pm:684
#, c-format
msgid ""
"Please select the correct port. For example, the \"COM1\" port under\n"
"Windows is named \"ttyS0\" under GNU/Linux."
msgstr ""
"請選擇正確的連接埠名稱. 比方, Windows 所稱呼的 \"COM1\"\n"
"在 GNU/Linux 環境是稱呼為 \"ttyS0\"."

#: help.pm:688
#, c-format
msgid ""
"This is the most crucial decision point for the security of your GNU/Linux\n"
"system: you must enter the \"root\" password. \"Root\" is the system\n"
"administrator and is the only user authorized to make updates, add users,\n"
"change the overall system configuration, and so on. In short, \"root\" can\n"
"do everything! That's why you must choose a password which is difficult to\n"
"guess: DrakX will tell you if the password you chose is too simple. As you\n"
"can see, you're not forced to enter a password, but we strongly advise\n"
"against this. GNU/Linux is just as prone to operator error as any other\n"
"operating system. Since \"root\" can overcome all limitations and\n"
"unintentionally erase all data on partitions by carelessly accessing the\n"
"partitions themselves, it is important that it be difficult to become\n"
"\"root\".\n"
"\n"
"The password should be a mixture of alphanumeric characters and at least 8\n"
"characters long. Never write down the \"root\" password -- it makes it far\n"
"too easy to compromise your system.\n"
"\n"
"One caveat: do not make the password too long or too complicated because you\n"
"must be able to remember it!\n"
"\n"
"The password will not be displayed on screen as you type it. To reduce the\n"
"chance of a blind typing error you'll need to enter the password twice. If\n"
"you do happen to make the same typing error twice, you'll have to use this\n"
"``incorrect'' password the first time you'll try to connect as \"root\".\n"
"\n"
"If you want an authentication server to control access to your computer,\n"
"click on the \"%s\" button.\n"
"\n"
"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
"services, select the appropriate one for \"%s\". If you do not know which\n"
"one to use, you should ask your network administrator.\n"
"\n"
"If you happen to have problems with remembering passwords, or if your\n"
"computer will never be connected to the Internet and you absolutely trust\n"
"everybody who uses your computer, you can choose to have \"%s\"."
msgstr ""
"這是最重要的 GNU/Linux 系統安全性決定點: 你一定要輸入 \"root\" 密碼.\n"
"\"root\" 是系統管理員且是被授權做更新, 增加使用者, 變更整個系統設定等等\n"
"的人. 簡而言之, \"root\"能做任何事! 那就是為什麼您必須要選擇一個困難猜測\n"
"的密碼. DrakX 將告訴您您的密碼是否太簡單. 就像您所見的一樣, 您並不被強制輸入\n"
"一個密碼, 但是我們強烈建議如此. GNU/Linux 就像其他任何作業系統一般易於受\n"
"操作手錯誤影響. 因為 \"root\" 可以克服全部限制且藉由不小心存取分割, 可以\n"
"不經意地抹除全部分割上的資料, 困難變成 \"root\" 是重要的.\n"
"\n"
"密碼應該是一組字母與數字字元且至少 8 個字元長. 絕不寫下 \"root\" 密碼 - \n"
"它使得太容易妥協您的系統(安全性).\n"
"\n"
"一個警告: 別把密碼設定太長或太複雜, 因為您必須能記住它!\n"
"\n"
"您在輸入密碼時, 螢幕上不會顯示出你實際敲入的內容. 另外就是您需要輸入兩次\n"
"以便於確定所輸入的密碼沒有打錯. 如果您不小心做出兩次同樣的輸入錯誤,\n"
"您將必須使用這個 ``錯誤'' 密碼於第一次您試著以 \"root\" 連入.\n"
"\n"
"如果您想要一個認證伺服器來控制存取您的電腦, 點選 \"%s\" 按鍵.\n"
"\n"
"若是你知道您所在網路有使用 LDAP, NIS, 或 PDC Windows 網域認證服務,\n"
"選適合的一個給 \"%s\". 如果您不知道選那一個, 向網路管理者詢問相關資訊.\n"
"\n"
"如果您遇到記住密碼的問題, 或如果您的電腦將永遠不連上網際網路且您絕對相信\n"
"任何使用您的電腦的人, 您可以選擇有 \"%s\"."

#: help.pm:722
#, c-format
msgid "authentication"
msgstr "認證"

#: help.pm:725
#, c-format
msgid ""
"A boot loader is a little program which is started by the computer at boot\n"
"time. It's responsible for starting up the whole system. Normally, the boot\n"
"loader installation is totally automated. DrakX will analyze the disk boot\n"
"sector and act according to what it finds there:\n"
"\n"
" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
"boot sector. This way you'll be able to load either GNU/Linux or any other\n"
"OS installed on your machine.\n"
"\n"
" * if a GRUB or LILO boot sector is found, it'll replace it with a new one.\n"
"\n"
"If DrakX can not determine where to place the boot sector, it'll ask you\n"
"where it should place it. Generally, the \"%s\" is the safest place.\n"
"Choosing \"%s\" will not install any boot loader. Use this option only if you\n"
"know what you're doing."
msgstr ""

#: help.pm:742
#, c-format
msgid ""
"Now, it's time to select a printing system for your computer. Other\n"
"operating systems may offer you one, but Mandrakelinux offers two. Each of\n"
"the printing systems is best suited to particular types of configuration.\n"
"\n"
" * \"%s\" -- which is an acronym for ``print, do not queue'', is the choice\n"
"if you have a direct connection to your printer, you want to be able to\n"
"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
"will handle only very simple network cases and is somewhat slow when used\n"
"within networks.) It's recommended that you use \"pdq\" if this is your\n"
"first experience with GNU/Linux.\n"
"\n"
" * \"%s\" stands for `` Common Unix Printing System'' and is an excellent\n"
"choice for printing to your local printer or to one halfway around the\n"
"planet. It's simple to configure and can act as a server or a client for\n"
"the ancient \"lpd\" printing system, so it's compatible with older\n"
"operating systems which may still need print services. While quite\n"
"powerful, the basic setup is almost as easy as \"pdq\". If you need to\n"
"emulate a \"lpd\" server, make sure you turn on the \"cups-lpd\" daemon.\n"
"\"%s\" includes graphical front-ends for printing or choosing printer\n"
"options and for managing the printer.\n"
"\n"
"If you make a choice now, and later find that you do not like your printing\n"
"system you may change it by running PrinterDrake from the Mandrakelinux\n"
"Control Center and clicking on the \"%s\" button."
msgstr ""
"現在要選擇您的電腦要使用的列印系統. 其他作業系統或許只有提供您一種選擇,\n"
"但是 Mandrakelinux 這邊提供了兩種選擇. 每一種列印系統是最適合於特別設定型態.\n"
"\n"
" * \"%s\" - 是 ``print, do not queue (列印, 不排隊)'' 之縮寫字, 是當您有一個\n"
"直接連線的印表機, 您不想因為卡紙而驚慌, 且您沒有網路印表機. (\"%s\"\n"
"只將會處理非常簡單的網路條件且當用於網路時有些慢) 如果這是您第一次 GNU/Linux\n"
"經驗, 建議您使用\"pdq\".\n"
"\n"
" * \"%s\" 是 ``Common Unix Printing System (通用 Unix 列印系統)'', 這是一套\n"
"對於直接列印到本地端印表機上, 或者是到地球另一端都相當出色的選擇. 它的設定\n"
"是相當簡單且可以當成古老的 lpd 列印系統的伺服器端或者是用戶端使用, 所以它是\n"
"相容於需要列印服務比較舊的作業系統. 相當強力, 基本設定幾乎跟 \"pdq\" 一樣\n"
"簡單. 如果您希望能夠模擬 \"lpd\" 伺服器, 確定您開啟 \"cups-lpd\" daemon.\n"
"\"%s\" 提供了圖形的介面前端給列印, 選擇列印的選項, 管理印表機.\n"
"\n"
"如果您現在做出決定, 且您之後發現不喜歡您的列印系統, 您可以藉由從\n"
"Mandrakelinux 控制中心執行 PrinterDrake 點選 \"%s\" 按鍵改變它."

#: help.pm:765
#, c-format
msgid "pdq"
msgstr ""

#: help.pm:765
#: printer/cups.pm:115
#: printer/data.pm:118
#, c-format
msgid "CUPS"
msgstr "CUPS"

#: help.pm:765
#, c-format
msgid "Expert"
msgstr "專家"

#: help.pm:768
#, c-format
msgid ""
"DrakX will first detect any IDE devices present in your computer. It will\n"
"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
"found, DrakX will automatically install the appropriate driver.\n"
"\n"
"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
"your hard drives. If so, you'll have to specify your hardware by hand.\n"
"\n"
"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
"want to configure options for it. You should allow DrakX to probe the\n"
"hardware for the card-specific options which are needed to initialize the\n"
"adapter. Most of the time, DrakX will get through this step without any\n"
"issues.\n"
"\n"
"If DrakX is not able to probe for the options to automatically determine\n"
"which parameters need to be passed to the hardware, you'll need to manually\n"
"configure the driver."
msgstr ""
"DrakX 將要偵測您電腦上的 IDE 裝置. 它也會順便掃描您系統上的 PCI\n"
"SCSI 介面卡. 當偵測到 SCSI 卡時, DrakX 將會自動安裝適當的驅動程式\n"
"\n"
"因為也許無法完全的偵測出您的系統是否還有更多的硬體裝置, 所以 DrakX或許會失敗偵測您的硬碟. 若是這樣, 您必須手動指定您的硬體.\n"
"\n"
"如果您必須手動方式指定您的 PCI SCSI 適配器時, DrakX 會詢問您是否要對這個\n"
"驅動程式設定選項參數. 您應該要允許 DrakX 能夠先自動偵測硬體卡特別的選項參數\n"
"以需要初始化適配器. 通常, DrakX 將會沒有問題通過這個步驟.\n"
"\n"
"若是 DrakX 無法偵測選項以自動決定那個參數需要被送到硬體, 您必須手動設定\n"
"驅動程式."

#: help.pm:786
#, c-format
msgid ""
"\"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver."
msgstr ""

#: help.pm:788
#: help.pm:855
#: install_steps_interactive.pm:1005
#: install_steps_interactive.pm:1022
#, c-format
msgid "Sound card"
msgstr "音效卡"

#: help.pm:791
#, c-format
msgid ""
"As a review, DrakX will present a summary of information it has gathered\n"
"about your system. Depending on the hardware installed on your machine, you\n"
"may have some or all of the following entries. Each entry is made up of the\n"
"hardware item to be configured, followed by a quick summary of the current\n"
"configuration. Click on the corresponding \"%s\" button to make the change.\n"
"\n"
" * \"%s\": check the current keyboard map configuration and change it if\n"
"necessary.\n"
"\n"
" * \"%s\": check the current country selection. If you're not in this\n"
"country, click on the \"%s\" button and choose another. If your country\n"
"is not in the list shown, click on the \"%s\" button to get the complete\n"
"country list.\n"
"\n"
" * \"%s\": by default, DrakX deduces your time zone based on the country\n"
"you have chosen. You can click on the \"%s\" button here if this is not\n"
"correct.\n"
"\n"
" * \"%s\": verify the current mouse configuration and click on the button\n"
"to change it if necessary.\n"
"\n"
" * \"%s\": clicking on the \"%s\" button will open the printer\n"
"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
"Guide'' for more information on how to set up a new printer. The interface\n"
"presented in our manual is similar to the one used during installation.\n"
"\n"
" * \"%s\": if a sound card is detected on your system, it'll be displayed\n"
"here. If you notice the sound card is not the one actually present on your\n"
"system, you can click on the button and choose a different driver.\n"
"\n"
" * \"%s\": if you have a TV card, this is where information about its\n"
"configuration will be displayed. If you have a TV card and it is not\n"
"detected, click on \"%s\" to try to configure it manually.\n"
"\n"
" * \"%s\": you can click on \"%s\" to change the parameters associated with\n"
"the card if you feel the configuration is wrong.\n"
"\n"
" * \"%s\": by default, DrakX configures your graphical interface in\n"
"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
"\"%s\" to reconfigure your graphical interface.\n"
"\n"
" * \"%s\": if you wish to configure your Internet or local network access,\n"
"you can do so now. Refer to the printed documentation or use the\n"
"Mandrakelinux Control Center after the installation has finished to benefit\n"
"from full in-line help.\n"
"\n"
" * \"%s\": allows to configure HTTP and FTP proxy addresses if the machine\n"
"you're installing on is to be located behind a proxy server.\n"
"\n"
" * \"%s\": this entry allows you to redefine the security level as set in a\n"
"previous step ().\n"
"\n"
" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
"the corresponding section of the ``Starter Guide'' for details about\n"
"firewall settings.\n"
"\n"
" * \"%s\": if you wish to change your bootloader configuration, click this\n"
"button. This should be reserved to advanced users. Refer to the printed\n"
"documentation or the in-line help about bootloader configuration in the\n"
"Mandrakelinux Control Center.\n"
"\n"
" * \"%s\": through this entry you can fine tune which services will be run\n"
"on your machine. If you plan to use this machine as a server it's a good\n"
"idea to review this setup."
msgstr ""

#: help.pm:855
#: install_steps_interactive.pm:964
#: standalone/drakclock:100
#, c-format
msgid "Timezone"
msgstr "時區"

#: help.pm:855
#: install_steps_interactive.pm:1038
#, c-format
msgid "TV card"
msgstr "電視卡"

#: help.pm:855
#, c-format
msgid "ISDN card"
msgstr "ISDN 卡"

#: help.pm:855
#, c-format
msgid "Graphical Interface"
msgstr "圖形介面"

#: help.pm:855
#: install_any.pm:1528
#: install_steps_interactive.pm:1056
#: standalone/drakbackup:2036
#, c-format
msgid "Network"
msgstr "網路"

#: help.pm:855
#: install_steps_interactive.pm:1071
#, c-format
msgid "Proxies"
msgstr "代理伺服器"

#: help.pm:855
#: install_steps_interactive.pm:1082
#, c-format
msgid "Security Level"
msgstr "安全層級"

#: help.pm:855
#: install_steps_interactive.pm:1096
#, c-format
msgid "Firewall"
msgstr "防火牆"

#: help.pm:855
#: install_steps_interactive.pm:1110
#, c-format
msgid "Bootloader"
msgstr "開機載入器"

#: help.pm:855
#: install_steps_interactive.pm:1123
#: services.pm:193
#, c-format
msgid "Services"
msgstr "服務"

#: help.pm:858
#, c-format
msgid ""
"Choose the hard drive you want to erase in order to install your new\n"
"Mandrakelinux partition. Be careful, all data on this drive will be lost\n"
"and will not be recoverable!"
msgstr ""
"選擇您想要抹除的硬碟來安裝新的 Mandrakelinux 分割. 小心,\n"
"磁碟上全部資料將遺失且將無法挽回!"

#: help.pm:863
#, c-format
msgid ""
"Click on \"%s\" if you want to delete all data and partitions present on\n"
"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
"to recover any data and partitions present on this hard drive, including\n"
"any Windows data.\n"
"\n"
"Click on \"%s\" to quit this operation without losing data and partitions\n"
"present on this hard drive."
msgstr ""
"您如果想要刪除在這個硬碟上的全部資料與分割, 點選 \"%s\".\n"
"小心, 點選 \"%s\" 之後, 您將無法挽回任何在這個硬碟上的資料與分割, 包含\n"
"Windows 資料.\n"
"\n"
"點選 \"%s\" 以不遺失在這個硬碟上的資料與分割放棄這個動作."

#: help.pm:869
#, c-format
msgid "Next ->"
msgstr "下一步 ->"

#: help.pm:869
#, c-format
msgid "<- Previous"
msgstr "<- 上一步"

#: install2.pm:117
#, c-format
msgid "Can not access kernel modules corresponding to your kernel (file %s is missing), this generally means your boot floppy in not in sync with the Installation medium (please create a newer boot floppy)"
msgstr ""
"無法存取對應您的核心的核心模組 (檔案 %s 遺失)，這一般表示您的開機軟片不同步於\n"
"安裝媒介 (請建立一個更新的開機磁片)"

#: install2.pm:167
#, c-format
msgid "You must also format %s"
msgstr "您也必須要格式化 %s"

#: install_any.pm:376
#, c-format
msgid "Do you have further supplementary media?"
msgstr "您還有其他的補充媒介嗎?"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:379
#, c-format
msgid ""
"The following media have been found and will be used during install: %s.\n"
"\n"
"\n"
"Do you have a supplementary installation media to configure?"
msgstr ""
"下列媒介已經被發現且將被用於安裝： %s。\n"
"\n"
"\n"
"您有補充安裝媒介要設定嗎?"

#: install_any.pm:388
#: printer/printerdrake.pm:2929
#: printer/printerdrake.pm:2936
#: standalone/scannerdrake:182
#: standalone/scannerdrake:190
#: standalone/scannerdrake:241
#: standalone/scannerdrake:248
#, c-format
msgid "CD-ROM"
msgstr "CD-ROM"

#: install_any.pm:388
#, c-format
msgid "Network (http)"
msgstr "網路 (http)"

#: install_any.pm:388
#, c-format
msgid "Network (ftp)"
msgstr "網路 (ftp)"

#: install_any.pm:436
#: standalone/drakbackup:112
#, c-format
msgid "No device found"
msgstr "沒有找到任何裝置"

#: install_any.pm:440
#, c-format
msgid "Insert the CD"
msgstr "請插入光碟"

#: install_any.pm:445
#, c-format
msgid "Unable to mount CD-ROM"
msgstr "無法掛載光碟機"

#: install_any.pm:468
#, c-format
msgid "Insert the CD 1 again"
msgstr "請再次插入光碟 1"

#: install_any.pm:478
#: install_any.pm:482
#, c-format
msgid "URL of the mirror?"
msgstr "映像站的 URL？"

#: install_any.pm:515
#, c-format
msgid "Can't find a package list file on this mirror. Make sure the location is correct."
msgstr "無法在這個映像站上找到套件列表檔。請確定位址是正確的。"

#: install_any.pm:633
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done."
msgstr ""
"更換光碟片！\n"
"請插入標籤為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。"

#: install_any.pm:652
#, c-format
msgid "Copying in progress"
msgstr "複製進行中"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:783
#, c-format
msgid ""
"You have selected the following server(s): %s\n"
"\n"
"\n"
"These servers are activated by default. They do not have any known security\n"
"issues, but some new ones could be found. In that case, you must make sure\n"
"to upgrade as soon as possible.\n"
"\n"
"\n"
"Do you really want to install these servers?\n"
msgstr ""
"您已經選擇了下面的伺服器：%s\n"
"\n"
"\n"
"這些伺服器安裝好後預設是啟用的。他們沒有任何已知的安全性問題，\n"
"但是某些新的安全性問題或許會被發現。在這種情況下，請您一定要儘快更新。\n"
"\n"
"\n"
"您確定真的要安裝這些伺服器嗎？\n"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_any.pm:806
#, c-format
msgid ""
"The following packages will be removed to allow upgrading your system: %s\n"
"\n"
"\n"
"Do you really want to remove these packages?\n"
msgstr ""
"下列套件將被移除以升級您的系統：%s\n"
"\n"
"\n"
"您確定要移除這些套件嗎？\n"

#: install_any.pm:1214
#: partition_table.pm:603
#, c-format
msgid "Error reading file %s"
msgstr "讀取檔案 %s 時發生錯誤"

#: install_any.pm:1425
#, c-format
msgid "The following disk(s) were renamed:"
msgstr "下列磁碟已經改名："

#: install_any.pm:1427
#, c-format
msgid "%s (previously named as %s)"
msgstr "%s (原本為 %s)"

#: install_any.pm:1465
#, c-format
msgid "An error occurred - no valid devices were found on which to create new filesystems. Please check your hardware for the cause of this problem"
msgstr "發生了一個錯誤 - 找不到任何有效的裝置可以用來建立新的檔案系統，請檢查您的硬體以找出問題的原因所在"

#: install_any.pm:1509
#, c-format
msgid "HTTP"
msgstr "HTTP"

#: install_any.pm:1509
#, c-format
msgid "FTP"
msgstr "FTP"

#: install_any.pm:1509
#, c-format
msgid "NFS"
msgstr "NFS"

#: install_any.pm:1532
#, c-format
msgid "Please choose a media"
msgstr "請選擇一個媒介"

#: install_any.pm:1564
#, c-format
msgid "Bad media %s"
msgstr "損壞的媒介 %s"

#: install_any.pm:1576
#, c-format
msgid "File already exists. Overwrite it?"
msgstr "檔案已經存在了。要覆蓋它嗎？"

#: install_any.pm:1627
#, c-format
msgid "Can not make screenshots before partitioning"
msgstr "在尚未進行分割前無法提供畫面捕捉功能"

#: install_any.pm:1634
#, c-format
msgid "Screenshots will be available after install in %s"
msgstr "在安裝於 %s 後就能夠提供畫面捕捉功能"

#: install_gtk.pm:136
#, c-format
msgid "System installation"
msgstr "系統安裝"

#: install_gtk.pm:139
#, c-format
msgid "System configuration"
msgstr "系統設定"

#: install_interactive.pm:22
#, c-format
msgid ""
"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
"You can find some information about them at: %s"
msgstr ""
"某些在您電腦上的硬體需要 ``版權專有'' 的驅動程式以便於能夠工作。\n"
"您可以在這裡找到一些相關的資訊： %s"

#: install_interactive.pm:62
#, c-format
msgid ""
"You must have a root partition.\n"
"For this, create a partition (or click on an existing one).\n"
"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
"您必須指定一個分割區來放根目錄。\n"
"請建立一個分割區 (或點選一個已經存在的)，\n"
"接著選動作 ``掛載點'' 且把它設成 `/'"

#: install_interactive.pm:67
#, c-format
msgid ""
"You do not have a swap partition.\n"
"\n"
"Continue anyway?"
msgstr ""
"您沒有設定置換分割區 (swap)。\n"
"\n"
"不管如何都要繼續？"

#: install_interactive.pm:70
#: install_steps.pm:211
#, c-format
msgid "You must have a FAT partition mounted in /boot/efi"
msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"

#: install_interactive.pm:97
#, c-format
msgid "Not enough free space to allocate new partitions"
msgstr "沒有足夠的空間可以建立新的分割區了"

#: install_interactive.pm:105
#, c-format
msgid "Use existing partitions"
msgstr "使用已經存在的分割區"

#: install_interactive.pm:107
#, c-format
msgid "There is no existing partition to use"
msgstr "沒有已經存在的分割區可供使用"

#: install_interactive.pm:114
#, c-format
msgid "Use the Windows partition for loopback"
msgstr "使用 Windows 分割區作為 loopback"

#: install_interactive.pm:117
#, c-format
msgid "Which partition do you want to use for Linux4Win?"
msgstr "您希望要用那個分割區給 Linux4Win 來使用呢？"

#: install_interactive.pm:119
#, c-format
msgid "Choose the sizes"
msgstr "選取大小"

#: install_interactive.pm:120
#, c-format
msgid "Root partition size in MB: "
msgstr "根分割區的大小 (MB)："

#: install_interactive.pm:121
#, c-format
msgid "Swap partition size in MB: "
msgstr "置換分割區 (swap) 的大小 (MB)："

#: install_interactive.pm:130
#, c-format
msgid "There is no FAT partition to use as loopback (or not enough space left)"
msgstr "沒有可用的 FAT 分割區能當成 loopback 使用 (或者是沒有足夠的剩餘空間)"

#: install_interactive.pm:139
#, c-format
msgid "Which partition do you want to resize?"
msgstr "您要重新調整那個分割區的大小？"

#: install_interactive.pm:153
#, c-format
msgid ""
"The FAT resizer is unable to handle your partition, \n"
"the following error occurred: %s"
msgstr ""
"FAT 重新調整大小無法處理您的分割區，\n"
"發生了以下的錯誤： %s"

#: install_interactive.pm:156
#, c-format
msgid "Computing the size of the Windows partition"
msgstr "計算 Windows 分割區大小"

#: install_interactive.pm:163
#, c-format
msgid "Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrakelinux installation."
msgstr "您的 Windows 分割區太支離破碎。請先用 Windows 重新開機，執行  ``defrag'' 工具程式，然後重新開始安裝 Mandrakelinux 。"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_interactive.pm:166
#, c-format
msgid ""
"WARNING!\n"
"\n"
"DrakX will now resize your Windows partition. Be careful: this\n"
"operation is dangerous. If you have not already done so, you\n"
"first need to exit the installation, run \"chkdsk c:\" from a\n"
"Command Prompt under Windows (beware, running graphical program\n"
"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
"Command Prompt!), optionally run defrag, then restart the\n"
"installation. You should also backup your data.\n"
"When sure, press Ok."
msgstr ""
"警告！\n"
"\n"
"DrakX 現在將要重新調整您 Windows 分割區的大小。請注意：這個動作\n"
"是很危險的。如果您不曾做過，您必須先離開安裝程式，在 Windows 命\n"
"令提示字元下執行 \"chkdsk c:\" (請注意，執行圖形介面的程式 \n"
"\"scandisk\" 並不夠，請確定是在命令提示下使用 \"chkdsk\" ！)，\n"
"您還可以額外執行 defrag，然後重新開始安裝。您也應該備份您的資料\n"
"。當您確定之後，請按下確定。"

#: install_interactive.pm:178
#, c-format
msgid "Which size do you want to keep for Windows on"
msgstr "您要保留多少空間給 Windows 使用"

#: install_interactive.pm:179
#, c-format
msgid "partition %s"
msgstr "分割區 %s"

#: install_interactive.pm:188
#, c-format
msgid "Resizing Windows partition"
msgstr "正在重新調整 Windows 分割區大小"

#: install_interactive.pm:193
#, c-format
msgid "FAT resizing failed: %s"
msgstr "FAT 重新調整大小失敗： %s"

#: install_interactive.pm:208
#, c-format
msgid "There is no FAT partition to resize (or not enough space left)"
msgstr "沒有 FAT 分割區能夠調整大小 (或者是沒足夠空間剩下)"

#: install_interactive.pm:213
#, c-format
msgid "Remove Windows(TM)"
msgstr "移除 Windows(TM)"

#: install_interactive.pm:215
#, c-format
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "你有多於一個硬碟, 您打算那一個安裝 linux?"

#: install_interactive.pm:219
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失"

#: install_interactive.pm:232
#, c-format
msgid "Use fdisk"
msgstr "使用 fdisk"

#: install_interactive.pm:235
#, c-format
msgid ""
"You can now partition %s.\n"
"When you are done, do not forget to save using `w'"
msgstr ""
"您現在可以對 %s 分割區進行劃分動作.\n"
"當您完成時, 別忘了使用 'w' 儲存"

#: install_interactive.pm:271
#, c-format
msgid "I can not find any room for installing"
msgstr "找不到任何可用的安裝空間"

#: install_interactive.pm:275
#, c-format
msgid "The DrakX Partitioning wizard found the following solutions:"
msgstr "DrakX 分割巫師找到了下列解決方案:"

#: install_interactive.pm:281
#, c-format
msgid "Partitioning failed: %s"
msgstr "硬碟分割失敗: %s"

#: install_interactive.pm:288
#, c-format
msgid "Bringing up the network"
msgstr "帶起網路"

#: install_interactive.pm:293
#, c-format
msgid "Bringing down the network"
msgstr "關閉網路"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:10
#, c-format
msgid ""
"Introduction\n"
"\n"
"The operating system and the different components available in the Mandrakelinux distribution \n"
"shall be called the \"Software Products\" hereafter. The Software Products include, but are not \n"
"restricted to, the set of programs, methods, rules and documentation related to the operating \n"
"system and the different components of the Mandrakelinux distribution.\n"
"\n"
"\n"
"1. License Agreement\n"
"\n"
"Please read this document carefully. This document is a license agreement between you and  \n"
"Mandrakesoft S.A. which applies to the Software Products.\n"
"By installing, duplicating or using the Software Products in any manner, you explicitly \n"
"accept and fully agree to conform to the terms and conditions of this License. \n"
"If you disagree with any portion of the License, you are not allowed to install, duplicate or use \n"
"the Software Products. \n"
"Any attempt to install, duplicate or use the Software Products in a manner which does not comply \n"
"with the terms and conditions of this License is void and will terminate your rights under this \n"
"License. Upon termination of the License,  you must immediately destroy all copies of the \n"
"Software Products.\n"
"\n"
"\n"
"2. Limited Warranty\n"
"\n"
"The Software Products and attached documentation are provided \"as is\", with no warranty, to the \n"
"extent permitted by law.\n"
"Mandrakesoft S.A. will, in no circumstances and to the extent permitted by law, be liable for any special,\n"
"incidental, direct or indirect damages whatsoever (including without limitation damages for loss of \n"
"business, interruption of business, financial loss, legal fees and penalties resulting from a court \n"
"judgment, or any other consequential loss) arising out of  the use or inability to use the Software \n"
"Products, even if Mandrakesoft S.A. has been advised of the possibility or occurrence of such \n"
"damages.\n"
"\n"
"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME COUNTRIES\n"
"\n"
"To the extent permitted by law, Mandrakesoft S.A. or its distributors will, in no circumstances, be \n"
"liable for any special, incidental, direct or indirect damages whatsoever (including without \n"
"limitation damages for loss of business, interruption of business, financial loss, legal fees \n"
"and penalties resulting from a court judgment, or any other consequential loss) arising out \n"
"of the possession and use of software components or arising out of  downloading software components \n"
"from one of Mandrakelinux sites  which are prohibited or restricted in some countries by local laws.\n"
"This limited liability applies to, but is not restricted to, the strong cryptography components \n"
"included in the Software Products.\n"
"\n"
"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or entities.  Most \n"
"of these components are governed under the terms and conditions of the GNU General Public \n"
"Licence, hereafter called \"GPL\", or of similar licenses. Most of these licenses allow you to use, \n"
"duplicate, adapt or redistribute the components which they cover. Please read carefully the terms \n"
"and conditions of the license agreement for each component before using any component. Any question \n"
"on a component license should be addressed to the component author and not to Mandrakesoft.\n"
"The programs developed by Mandrakesoft S.A. are governed by the GPL License. Documentation written \n"
"by Mandrakesoft S.A. is governed by a specific license. Please refer to the documentation for \n"
"further details.\n"
"\n"
"\n"
"4. Intellectual Property Rights\n"
"\n"
"All rights to the components of the Software Products belong to their respective authors and are \n"
"protected by intellectual property and copyright laws applicable to software programs.\n"
"Mandrakesoft S.A. reserves its rights to modify or adapt the Software Products, as a whole or in \n"
"parts, by all means and for all purposes.\n"
"\"Mandrake\", \"Mandrakelinux\" and associated logos are trademarks of Mandrakesoft S.A.  \n"
"\n"
"\n"
"5. Governing Laws \n"
"\n"
"If any portion of this agreement is held void, illegal or inapplicable by a court judgment, this \n"
"portion is excluded from this contract. You remain bound by the other applicable sections of the \n"
"agreement.\n"
"The terms and conditions of this License are governed by the Laws of France.\n"
"All disputes on the terms of this license will preferably be settled out of court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of Paris - France.\n"
"For any question on this document, please contact Mandrakesoft S.A.  \n"
msgstr ""

#: install_messages.pm:90
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
"Software included may be covered by patents in your country. For example, the\n"
"MP3 decoders included may require a licence for further usage (see\n"
"http://www.mp3licensing.com for more details). If you are unsure if a patent\n"
"may be applicable to you, check your local laws."
msgstr ""

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:98
#, c-format
msgid ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"
msgstr ""
"\n"
"Warning\n"
"\n"
"Please read carefully the terms below. If you disagree with any\n"
"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
"to continue the installation without using these media.\n"
"\n"
"\n"
"Some components contained in the next CD media are not governed\n"
"by the GPL License or similar agreements. Each such component is then\n"
"governed by the terms and conditions of its own specific license. \n"
"Please read carefully and comply with such specific licenses before \n"
"you use or redistribute the said components. \n"
"Such licenses will in general prevent the transfer,  duplication \n"
"(except for backup purposes), redistribution, reverse engineering, \n"
"de-assembly, de-compilation or modification of the component. \n"
"Any breach of agreement will immediately terminate your rights under \n"
"the specific license. Unless the specific license terms grant you such\n"
"rights, you usually cannot install the programs on more than one\n"
"system, or adapt it to be used on a network. In doubt, please contact \n"
"directly the distributor or editor of the component. \n"
"Transfer to third parties or copying of such components including the \n"
"documentation is usually forbidden.\n"
"\n"
"\n"
"All rights to the components of the next CD media belong to their \n"
"respective authors and are protected by intellectual property and \n"
"copyright laws applicable to software programs.\n"

#: install_messages.pm:131
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
"Remove the boot media and press return to reboot.\n"
"\n"
"\n"
"For information on fixes which are available for this release of Mandrakelinux,\n"
"consult the Errata available from:\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"Information on configuring your system is available in the post\n"
"install chapter of the Official Mandrakelinux User's Guide."
msgstr ""
"恭喜您！系統已經完成安裝。\n"
"請取出開機媒介並按下 return 以重新開機。\n"
"\n"
"\n"
"要獲得這個 Mandrakelinux 釋出版本可用的修正相關資訊，\n"
"請諮詢可用的勘誤表：\n"
"\n"
"\n"
"%s\n"
"\n"
"\n"
"關於如何設定您系統的資訊可以在官方 Mandrakelinux 使用者指南\n"
"(Official Mandrakelinux User's Guide) 的安裝後章節 (post install chapter )\n"
"裡面找到。"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: install_messages.pm:144
#, c-format
msgid "http://www.mandrakelinux.com/en/errata.php3"
msgstr "http://www.mandrakelinux.com/en/errata.php3"

#: install_steps.pm:246
#, c-format
msgid "Duplicate mount point %s"
msgstr "重複的掛載點 %s"

#: install_steps.pm:479
#, c-format
msgid ""
"Some important packages did not get installed properly.\n"
"Either your cdrom drive or your cdrom is defective.\n"
"Check the cdrom on an installed computer using \"rpm -qpl media/main/*.rpm\"\n"
msgstr ""
"有某些重要的套件沒有被適當地安裝。\n"
"可能是您的光碟機或者是光碟片有缺陷。\n"
"請將光碟放在一個已經安裝好的電腦上使用 \"rpm -qpl media/main/*.rpm\" 來檢查\n"

#: install_steps.pm:599
#, c-format
msgid "No floppy drive available"
msgstr "沒有可用的軟碟機"

#: install_steps_auto_install.pm:76
#: install_steps_stdio.pm:27
#, c-format
msgid "Entering step `%s'\n"
msgstr "進入步驟 `%s'\n"

#: install_steps_gtk.pm:177
#, c-format
msgid ""
"Your system is low on resources. You may have some problem installing\n"
"Mandrakelinux. If that occurs, you can try a text install instead. For this,\n"
"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
"您的系統資源太少。您可能會在安裝 Mandrakelinux 過程中遇到問題。\n"
"若是真的發生問題，您或許可以改用文字模式的安裝方式來取代。\n"
"要如此作的話m，請在光碟開機時按下 `F1'，然後輸入 `text'。"

#: install_steps_gtk.pm:224
#: install_steps_interactive.pm:624
#, c-format
msgid "Package Group Selection"
msgstr "套件群組選擇"

#: install_steps_gtk.pm:250
#: install_steps_interactive.pm:567
#, c-format
msgid "Total size: %d / %d MB"
msgstr "總共大小： %d / %d MB"

#: install_steps_gtk.pm:295
#, c-format
msgid "Bad package"
msgstr "壞掉的套件"

#: install_steps_gtk.pm:297
#, c-format
msgid "Version: "
msgstr "版本："

#: install_steps_gtk.pm:298
#, c-format
msgid "Size: "
msgstr "大小："

#: install_steps_gtk.pm:298
#, c-format
msgid "%d KB\n"
msgstr "%d KB\n"

#: install_steps_gtk.pm:299
#, c-format
msgid "Importance: "
msgstr "重要性："

#: install_steps_gtk.pm:332
#, c-format
msgid "You can not select/unselect this package"
msgstr "您不可以選擇/取消選擇這個套件"

#: install_steps_gtk.pm:336
#, c-format
msgid "due to missing %s"
msgstr "因為遺失 %s"

#: install_steps_gtk.pm:337
#, c-format
msgid "due to unsatisfied %s"
msgstr "由於 %s 未被滿足"

#: install_steps_gtk.pm:338
#, c-format
msgid "trying to promote %s"
msgstr "正在嘗試促進 %s"

#: install_steps_gtk.pm:339
#, c-format
msgid "in order to keep %s"
msgstr "為了要保留 %s"

#: install_steps_gtk.pm:344
#, c-format
msgid "You can not select this package as there is not enough space left to install it"
msgstr "您不可以選取這個套件，因為剩餘的空間不足以安裝它。"

#: install_steps_gtk.pm:347
#, c-format
msgid "The following packages are going to be installed"
msgstr "下列的套件將會被安裝上"

#: install_steps_gtk.pm:348
#, c-format
msgid "The following packages are going to be removed"
msgstr "下列的套件將會被移除"

#: install_steps_gtk.pm:372
#, c-format
msgid "This is a mandatory package, it can not be unselected"
msgstr "這是一個必要的套件，您不可以選擇不要安裝這個套件"

#: install_steps_gtk.pm:374
#, c-format
msgid "You can not unselect this package. It is already installed"
msgstr "您不可以不選這個套件。它已經被安裝上了。"

#: install_steps_gtk.pm:377
#, c-format
msgid ""
"This package must be upgraded.\n"
"Are you sure you want to deselect it?"
msgstr ""
"這個套件一定要更新才行。\n"
"您確定您不要選它嗎？"

#: install_steps_gtk.pm:380
#, c-format
msgid "You can not unselect this package. It must be upgraded"
msgstr "您不可以不選這個套件，它一定要更新才行。"

#: install_steps_gtk.pm:385
#, c-format
msgid "Show automatically selected packages"
msgstr "顯示自動被選取的套件"

#: install_steps_gtk.pm:390
#, c-format
msgid "Load/Save selection"
msgstr "載入/儲存選取"

#: install_steps_gtk.pm:391
#, c-format
msgid "Updating package selection"
msgstr "正在更新套件的選擇"

#: install_steps_gtk.pm:396
#, c-format
msgid "Minimal install"
msgstr "最小安裝"

#: install_steps_gtk.pm:410
#: install_steps_interactive.pm:483
#, c-format
msgid "Choose the packages you want to install"
msgstr "選擇您想要安裝的套件"

#: install_steps_gtk.pm:426
#: install_steps_interactive.pm:706
#, c-format
msgid "Installing"
msgstr "正在安裝"

#: install_steps_gtk.pm:433
#, c-format
msgid "Estimating"
msgstr "正在估計"

#: install_steps_gtk.pm:482
#, c-format
msgid "No details"
msgstr "沒有詳細資訊"

#: install_steps_gtk.pm:490
#, c-format
msgid "Time remaining "
msgstr "剩餘時間"

#: install_steps_gtk.pm:497
#, c-format
msgid "Please wait, preparing installation..."
msgstr "請稍候，正在準備安裝..."

#: install_steps_gtk.pm:512
#, c-format
msgid "%d packages"
msgstr "%d 套件"

#: install_steps_gtk.pm:517
#, c-format
msgid "Installing package %s"
msgstr "正在安裝套件 %s"

#: install_steps_gtk.pm:552
#: install_steps_interactive.pm:92
#: install_steps_interactive.pm:731
#, c-format
msgid "Refuse"
msgstr "拒絕"

#: install_steps_gtk.pm:556
#: install_steps_interactive.pm:735
#, c-format
msgid ""
"Change your Cd-Rom!\n"
"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when done.\n"
"If you do not have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
"更換光碟片！\n"
"請插入標示為為 \"%s\" 的光碟於您的光碟機中，完成後請按下確定。\n"
"若是您沒有這片光碟，請點選取消以略過這一片光碟的安裝。"

#: install_steps_gtk.pm:571
#: install_steps_interactive.pm:746
#, c-format
msgid "There was an error ordering packages:"
msgstr "排列套件時發生錯誤："

#: install_steps_gtk.pm:571
#: install_steps_gtk.pm:575
#: install_steps_interactive.pm:746
#: install_steps_interactive.pm:750
#, c-format
msgid "Go on anyway?"
msgstr "無論如何都要繼續嗎？"

#: install_steps_gtk.pm:575
#: install_steps_interactive.pm:750
#, c-format
msgid "There was an error installing packages:"
msgstr "安裝套件時發生錯誤："

#: install_steps_gtk.pm:617
#: install_steps_interactive.pm:920
#: install_steps_interactive.pm:1072
#, c-format
msgid "not configured"
msgstr "未被設定"

#: install_steps_gtk.pm:680
#, c-format
msgid ""
"The following installation media have been found.\n"
"If you want to skip some of them, you can unselect them now."
msgstr ""
"已經找到下列的安裝媒介。\n"
"如果您想略過它們，您現在可以將它們取消選取。"

#: install_steps_gtk.pm:684
#, c-format
msgid ""
"You have the option to copy the contents of the CDs onto the hard drive before installation.\n"
"It will then continue from the hard drive and the packages will remain available once the system is fully installed."
msgstr ""
"您可以選擇在安裝前將光碟的內容複製到硬碟。稍候將會由硬碟繼續安裝，並且這些套件\n"
"在安裝完畢之後仍然可以繼續使用。"

#: install_steps_gtk.pm:686
#, c-format
msgid "Copy whole CDs"
msgstr "複製整張光碟"

#: install_steps_interactive.pm:85
#, c-format
msgid "License agreement"
msgstr "版權協議"

#: install_steps_interactive.pm:89
#, c-format
msgid "Release Notes"
msgstr "發行紀錄"

#: install_steps_interactive.pm:119
#, c-format
msgid "Please choose your keyboard layout."
msgstr "請選取鍵盤排列的樣式。"

#: install_steps_interactive.pm:121
#, c-format
msgid "Here is the full list of available keyboards"
msgstr "以下是所有可用的的鍵盤"

#: install_steps_interactive.pm:151
#, c-format
msgid "Install/Upgrade"
msgstr "安裝/升級"

#: install_steps_interactive.pm:152
#, c-format
msgid "Is this an install or an upgrade?"
msgstr "這是安裝或是升級？"

#: install_steps_interactive.pm:158
#, c-format
msgid "Upgrade %s"
msgstr "升級 %s"

#: install_steps_interactive.pm:168
#, c-format
msgid "Encryption key for %s"
msgstr "加密金鑰於 %s"

#: install_steps_interactive.pm:185
#, c-format
msgid "Please choose your type of mouse."
msgstr "請選取您滑鼠的形式。"

#: install_steps_interactive.pm:194
#: standalone/mousedrake:46
#, c-format
msgid "Mouse Port"
msgstr "滑鼠連接埠"

#: install_steps_interactive.pm:195
#: standalone/mousedrake:47
#, c-format
msgid "Please choose which serial port your mouse is connected to."
msgstr "請選取您滑鼠連接的序列埠。"

#: install_steps_interactive.pm:205
#, c-format
msgid "Buttons emulation"
msgstr "按鍵模擬"

#: install_steps_interactive.pm:207
#, c-format
msgid "Button 2 Emulation"
msgstr "第二鍵模擬"

#: install_steps_interactive.pm:208
#, c-format
msgid "Button 3 Emulation"
msgstr "第三鍵模擬"

#: install_steps_interactive.pm:229
#, c-format
msgid "PCMCIA"
msgstr "PCMCIA"

#: install_steps_interactive.pm:229
#, c-format
msgid "Configuring PCMCIA cards..."
msgstr "正在設定 PCMCIA 卡..."

#: install_steps_interactive.pm:236
#, c-format
msgid "IDE"
msgstr "IDE"

#: install_steps_interactive.pm:236
#, c-format
msgid "Configuring IDE"
msgstr "正在設定 IDE"

#: install_steps_interactive.pm:256
#: network/tools.pm:172
#, c-format
msgid "No partition available"
msgstr "沒有可用的分割區"

#: install_steps_interactive.pm:259
#, c-format
msgid "Scanning partitions to find mount points"
msgstr "正在掃描分割區以尋找掛載點"

#: install_steps_interactive.pm:266
#, c-format
msgid "Choose the mount points"
msgstr "選取掛載點"

#: install_steps_interactive.pm:312
#, c-format
msgid "No free space for 1MB bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"沒有足夠的可用空間安裝 bootstrap！安裝還是會繼續，但是您必須在 DiskDrake\n"
"中建立 bootstrap 分割來啟動您的系統"

#: install_steps_interactive.pm:317
#, c-format
msgid "You'll need to create a PPC PReP Boot bootstrap! Install will continue, but to boot your system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
"您需要建立一個 PPC PReP 開機 bootstrap！安裝還是會繼續, 但是您必須在 DiskDrake\n"
"中建立 bootstrap 分割來啟動您的系統"

#: install_steps_interactive.pm:353
#, c-format
msgid "Choose the partitions you want to format"
msgstr "選擇要格式化的分割區"

#: install_steps_interactive.pm:355
#, c-format
msgid "Check bad blocks?"
msgstr "檢查壞掉的區塊?"

#: install_steps_interactive.pm:383
#, c-format
msgid "Failed to check filesystem %s. Do you want to repair the errors? (beware, you can lose data)"
msgstr "無法檢查檔案系統 %s. 您要修復該錯誤嗎? (請注意, 您可能遺失資料)"

#: install_steps_interactive.pm:386
#, c-format
msgid "Not enough swap space to fulfill installation, please add some"
msgstr "沒有足夠的置換空間 (swap) 可以用來完成安裝, 請增加一些"

#: install_steps_interactive.pm:393
#, c-format
msgid "Looking for available packages and rebuilding rpm database..."
msgstr "正在搜尋可以用的套件並且建立 rpm 資料庫..."

#: install_steps_interactive.pm:394
#: install_steps_interactive.pm:452
#, c-format
msgid "Looking for available packages..."
msgstr "正在搜尋可以用的套件..."

#: install_steps_interactive.pm:397
#, c-format
msgid "Looking at packages already installed..."
msgstr "正在查看已經安裝過的套件..."

#: install_steps_interactive.pm:401
#, c-format
msgid "Finding packages to upgrade..."
msgstr "正在搜尋要升級的套件..."

#: install_steps_interactive.pm:421
#: install_steps_interactive.pm:825
#, c-format
msgid "Choose a mirror from which to get the packages"
msgstr "選取要用來抓取程式套件檔的 FTP 映射站台"

#: install_steps_interactive.pm:461
#, c-format
msgid "Your system does not have enough space left for installation or upgrade (%d > %d)"
msgstr "您的系統沒有足夠的空間可以用來安裝或升級了 (%d > %d)"

#: install_steps_interactive.pm:495
#, c-format
msgid ""
"Please choose load or save package selection.\n"
"The format is the same as auto_install generated files."
msgstr ""
"請選擇要載入或者儲存套件選擇到磁片上。\n"
"它使用與自動安裝所產生的磁片相同的格式。"

#: install_steps_interactive.pm:497
#, c-format
msgid "Load"
msgstr "負載"

#: install_steps_interactive.pm:497
#: standalone/drakbackup:3924
#: standalone/drakbackup:3997
#: standalone/logdrake:173
#, c-format
msgid "Save"
msgstr "儲存"

#: install_steps_interactive.pm:505
#, c-format
msgid "Bad file"
msgstr "損壞的檔案"

#: install_steps_interactive.pm:581
#, c-format
msgid "Selected size is larger than available space"
msgstr "所選取的大小超過可用的空間"

#: install_steps_interactive.pm:596
#, c-format
msgid "Type of install"
msgstr "安裝類型"

#: install_steps_interactive.pm:597
#, c-format
msgid ""
"You have not selected any group of packages.\n"
"Please choose the minimal installation you want:"
msgstr ""
"您並未選取任何套件群組.\n"
"請選擇您想要的最小安裝:"

#: install_steps_interactive.pm:601
#, c-format
msgid "With basic documentation (recommended!)"
msgstr "包含基本的說明文件 (被建議的!)"

#: install_steps_interactive.pm:602
#, c-format
msgid "Truly minimal install (especially no urpmi)"
msgstr "真正最小安裝 (尤其無 urpmi)"

#: install_steps_interactive.pm:641
#: standalone/drakxtv:52
#, c-format
msgid "All"
msgstr "全部"

#: install_steps_interactive.pm:680
#, c-format
msgid ""
"If you have all the CDs in the list below, click Ok.\n"
"If you have none of those CDs, click Cancel.\n"
"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
"如果您有下面清單內所列出的 CD, 請點選 Ok 確定.\n"
"如果都沒有的話, 請點選 Cancel 取消.\n"
"如果有一些項目您並沒有的話, 把該項目取消選取, 然後按下 Ok 確定."

#: install_steps_interactive.pm:685
#, c-format
msgid "Cd-Rom labeled \"%s\""
msgstr "標籤為 \"%s\" 的 Cd-Rom"

#: install_steps_interactive.pm:706
#, c-format
msgid "Preparing installation"
msgstr "正在準備安裝"

#: install_steps_interactive.pm:715
#, c-format
msgid ""
"Installing package %s\n"
"%d%%"
msgstr ""
"正在安裝 %s 套件\n"
"%d%%"

#: install_steps_interactive.pm:764
#, c-format
msgid "Post-install configuration"
msgstr "安裝後的設定"

#: install_steps_interactive.pm:770
#, c-format
msgid "Please insert the Update Modules floppy in drive %s"
msgstr "請在 %s 磁碟機內插入更新模組軟片"

#: install_steps_interactive.pm:799
#, c-format
msgid ""
"You now have the opportunity to download updated packages. These packages\n"
"have been updated after the distribution was released. They may\n"
"contain security or bug fixes.\n"
"\n"
"To download these packages, you will need to have a working Internet \n"
"connection.\n"
"\n"
"Do you want to install the updates?"
msgstr ""
"您現在有機會下載更新套件. 這些套件在發行版釋放之後已經被更新過了.\n"
"他們或許有安全性或臭蟲修正.\n"
"\n"
"要下載這些套件, 您將需要有可工作的網際網路連線.\n"
"\n"
"您想要安裝更新嗎?"

#: install_steps_interactive.pm:820
#, c-format
msgid "Contacting Mandrakelinux web site to get the list of available mirrors..."
msgstr "連結到 Mirror Linux Web Site 查詢可用的映射站台"

#: install_steps_interactive.pm:839
#, c-format
msgid "Contacting the mirror to get the list of available packages..."
msgstr "聯繫映射站台取得可用的程式套件列表..."

#: install_steps_interactive.pm:843
#, c-format
msgid "Unable to contact mirror %s"
msgstr "無法聯繫映射站台 %s"

#: install_steps_interactive.pm:843
#, c-format
msgid "Would you like to try again?"
msgstr "您要再試一次嗎?"

#: install_steps_interactive.pm:869
#: standalone/drakclock:45
#, c-format
msgid "Which is your timezone?"
msgstr "您的時區為何?"

#: install_steps_interactive.pm:874
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "自動時間同步(使用 NTP 服務)"

#: install_steps_interactive.pm:882
#, c-format
msgid "NTP Server"
msgstr "NTP 伺服器"

#: install_steps_interactive.pm:924
#: steps.pm:30
#, c-format
msgid "Summary"
msgstr "總結"

#: install_steps_interactive.pm:937
#: install_steps_interactive.pm:945
#: install_steps_interactive.pm:963
#: install_steps_interactive.pm:970
#: install_steps_interactive.pm:1122
#: services.pm:133
#: standalone/drakbackup:1599
#, c-format
msgid "System"
msgstr "系統"

#: install_steps_interactive.pm:977
#: install_steps_interactive.pm:1004
#: install_steps_interactive.pm:1021
#: install_steps_interactive.pm:1037
#: install_steps_interactive.pm:1048
#, c-format
msgid "Hardware"
msgstr "硬體"

#: install_steps_interactive.pm:983
#: install_steps_interactive.pm:992
#, c-format
msgid "Remote CUPS server"
msgstr "遠端 CUPS 伺服器"

#: install_steps_interactive.pm:983
#, c-format
msgid "No printer"
msgstr "無印表機"

#: install_steps_interactive.pm:1025
#, c-format
msgid "Do you have an ISA sound card?"
msgstr "您有 ISA 音效卡嗎?"

#: install_steps_interactive.pm:1027
#, c-format
msgid "Run \"alsaconf\" or \"sndconfig\" after installation to configure your sound card"
msgstr "請在安裝完畢後, 執行 \"alsaconf\" 或 \"sndconfig\" 來設定您的音效卡"

#: install_steps_interactive.pm:1029
#, c-format
msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr "沒偵測到任何音效卡. 請在安裝後嘗試 \"harddrake\" 進行設定"

#: install_steps_interactive.pm:1049
#, c-format
msgid "Graphical interface"
msgstr "圖形介面"

#: install_steps_interactive.pm:1055
#: install_steps_interactive.pm:1070
#, c-format
msgid "Network & Internet"
msgstr "網路 & 網際網路"

#: install_steps_interactive.pm:1072
#, c-format
msgid "configured"
msgstr "已設定"

#: install_steps_interactive.pm:1081
#: install_steps_interactive.pm:1095
#: steps.pm:20
#, c-format
msgid "Security"
msgstr "安全性"

#: install_steps_interactive.pm:1100
#, c-format
msgid "activated"
msgstr "以啟動"

#: install_steps_interactive.pm:1100
#, c-format
msgid "disabled"
msgstr "已停用"

#: install_steps_interactive.pm:1109
#, c-format
msgid "Boot"
msgstr "重新開機"

#. -PO: example: lilo-graphic on /dev/hda1
#: install_steps_interactive.pm:1113
#, c-format
msgid "%s on %s"
msgstr "%2$s 上的 %1$s"

#: install_steps_interactive.pm:1127
#: services.pm:175
#, c-format
msgid "Services: %d activated for %d registered"
msgstr "服務: %d 已經啟動 給 %d 註冊的項目"

#: install_steps_interactive.pm:1137
#, c-format
msgid "You have not configured X. Are you sure you really want this?"
msgstr "您尚未設定 X。您確定您真的要這樣做？"

#: install_steps_interactive.pm:1217
#, c-format
msgid "Preparing bootloader..."
msgstr "正在準備開機載入器..."

#: install_steps_interactive.pm:1227
#, fuzzy, c-format
msgid "You appear to have an OldWorld or Unknown machine, the yaboot bootloader will not work for you. The install will continue, but you'll need to use BootX or some other means to boot your machine. The kernel argument for the root fs is: root=%s"
msgstr ""
"您的系統似乎有 OldWorld 或者是其他不認識的機器,\n"
"這將會導致 yaboot 開機載入器無法正常運作.\n"
"安裝還是會繼續下去, 不過您將需要使用 bootX 或某些其他方法來開機你的機器."

#: install_steps_interactive.pm:1233
#, c-format
msgid "Do you want to use aboot?"
msgstr "您要使用 aboot 嗎?"

#: install_steps_interactive.pm:1236
#, c-format
msgid ""
"Error installing aboot, \n"
"try to force installation even if that destroys the first partition?"
msgstr ""
"安裝 aboot 時發生錯誤,\n"
"你要冒著可能毀損第一個分割區的危險強迫安裝嗎?"

#: install_steps_interactive.pm:1257
#, c-format
msgid "In this security level, access to the files in the Windows partition is restricted to the administrator."
msgstr ""

#: install_steps_interactive.pm:1286
#: standalone/drakautoinst:76
#, c-format
msgid "Insert a blank floppy in drive %s"
msgstr "請在 %s 中插入一片空白軟片"

#: install_steps_interactive.pm:1291
#, c-format
msgid "Please insert another floppy for drivers disk"
msgstr "請插入另一張軟片給驅動磁碟"

#: install_steps_interactive.pm:1293
#, c-format
msgid "Creating auto install floppy..."
msgstr "正在製作自動安裝軟片..."

#: install_steps_interactive.pm:1305
#, c-format
msgid ""
"Some steps are not completed.\n"
"\n"
"Do you really want to quit now?"
msgstr ""
"還有些步驟沒有完成.\n"
"\n"
"您確定要結束安裝程式?"

#: install_steps_interactive.pm:1321
#, c-format
msgid "Generate auto install floppy"
msgstr "製作自動安裝軟片"

#: install_steps_interactive.pm:1323
#, c-format
msgid ""
"The auto install can be fully automated if wanted,\n"
"in that case it will take over the hard drive!!\n"
"(this is meant for installing on another box).\n"
"\n"
"You may prefer to replay the installation.\n"
msgstr ""
"auto install 想要的話可以完全自動化, 在那種情況下它將接管硬碟!!\n"
"\n"
"(這是要安裝於另一台機器上的).\n"
"您或許想要重演安裝.\n"

#: install_steps_newt.pm:20
#, c-format
msgid "Mandrakelinux Installation %s"
msgstr "Mandrakelinux 安裝程式 %s"

#. -PO: This string must fit in a 80-char wide text screen
#: install_steps_newt.pm:34
#, c-format
msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
msgstr "  <Tab>/<Alt-Tab> 在元件間移動  | <Space> 選取 | <F12> 下個螢幕 "

#: interactive.pm:184
#, c-format
msgid "Choose a file"
msgstr "選擇一個檔案"

#: interactive.pm:309
#: interactive/gtk.pm:489
#: standalone/drakbackup:1540
#: standalone/drakfont:593
#: standalone/drakfont:660
#: standalone/drakups:297
#: standalone/drakups:357
#: standalone/drakups:377
#: standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Add"
msgstr "增加"

#: interactive.pm:309
#: interactive/gtk.pm:489
#, c-format
msgid "Modify"
msgstr "修改"

#: interactive.pm:309
#: interactive/gtk.pm:489
#: standalone/drakups:299
#: standalone/drakups:359
#: standalone/drakups:379
#: standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid "Remove"
msgstr "移除"

#: interactive.pm:386
#, c-format
msgid "Basic"
msgstr "基本"

#: interactive.pm:424
#: interactive/newt.pm:317
#: ugtk2.pm:506
#, c-format
msgid "Finish"
msgstr "完成"

#: interactive/newt.pm:92
#, c-format
msgid "Do"
msgstr "做"

#: interactive/stdio.pm:29
#: interactive/stdio.pm:148
#, c-format
msgid "Bad choice, try again\n"
msgstr "壞選擇, 再試一遍\n"

#: interactive/stdio.pm:30
#: interactive/stdio.pm:149
#, c-format
msgid "Your choice? (default %s) "
msgstr "您的選擇? (預設為 %s) "

#: interactive/stdio.pm:54
#, c-format
msgid ""
"Entries you'll have to fill:\n"
"%s"
msgstr ""
"欄位項目您需要輸入:\n"
"%s"

#: interactive/stdio.pm:70
#, c-format
msgid "Your choice? (0/1, default `%s') "
msgstr "您的選擇? (0/1, 預設為 `%s') "

#: interactive/stdio.pm:94
#, c-format
msgid "Button `%s': %s"
msgstr "按鈕 `%s': %s"

#: interactive/stdio.pm:95
#, c-format
msgid "Do you want to click on this button?"
msgstr "您要按這個按鈕嗎?"

#: interactive/stdio.pm:104
#, c-format
msgid "Your choice? (default `%s'%s) "
msgstr "您的選擇? (預設為 `%s'%s) "

#: interactive/stdio.pm:104
#, c-format
msgid " enter `void' for void entry"
msgstr " 輸入 `void' 表示空的項目"

#: interactive/stdio.pm:122
#, c-format
msgid "=> There are many things to choose from (%s).\n"
msgstr "=> %s 上有很多的事物可供選擇.\n"

#: interactive/stdio.pm:125
#, c-format
msgid ""
"Please choose the first number of the 10-range you wish to edit,\n"
"or just hit Enter to proceed.\n"
"Your choice? "
msgstr ""
"請選取前 10 個項目中您要編輯的第一個數字, 或者按下 Enter 繼續.\n"
"您選擇是?"

#: interactive/stdio.pm:138
#, c-format
msgid ""
"=> Notice, a label changed:\n"
"%s"
msgstr ""
"=> 請注意, 一個標籤已經變更了:\n"
"%s"

#: interactive/stdio.pm:145
#, c-format
msgid "Re-submit"
msgstr "重新送出"

#: keyboard.pm:170
#: keyboard.pm:204
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTZ)"
msgstr "捷克 (QWERTZ)"

#: keyboard.pm:171
#: keyboard.pm:206
#, c-format
msgid ""
"_: keyboard\n"
"German"
msgstr "德國"

#: keyboard.pm:172
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak"
msgstr "Dvorak"

#: keyboard.pm:173
#: keyboard.pm:223
#, c-format
msgid ""
"_: keyboard\n"
"Spanish"
msgstr "西班牙"

#: keyboard.pm:174
#: keyboard.pm:224
#, c-format
msgid ""
"_: keyboard\n"
"Finnish"
msgstr "芬蘭"

#: keyboard.pm:175
#: keyboard.pm:227
#, c-format
msgid ""
"_: keyboard\n"
"French"
msgstr "法國"

#: keyboard.pm:176
#: keyboard.pm:275
#, c-format
msgid ""
"_: keyboard\n"
"Norwegian"
msgstr "挪威"

#: keyboard.pm:177
#, c-format
msgid ""
"_: keyboard\n"
"Polish"
msgstr "波蘭"

#: keyboard.pm:178
#: keyboard.pm:287
#, c-format
msgid ""
"_: keyboard\n"
"Russian"
msgstr "俄羅斯"

#: keyboard.pm:180
#: keyboard.pm:293
#, c-format
msgid ""
"_: keyboard\n"
"Swedish"
msgstr "瑞典"

#: keyboard.pm:181
#: keyboard.pm:320
#, c-format
msgid "UK keyboard"
msgstr "英式鍵盤"

#: keyboard.pm:182
#: keyboard.pm:323
#, c-format
msgid "US keyboard"
msgstr "美式鍵盤"

#: keyboard.pm:184
#, c-format
msgid ""
"_: keyboard\n"
"Albanian"
msgstr "阿爾巴尼亞"

#: keyboard.pm:185
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (old)"
msgstr "亞美尼亞 (舊式)"

#: keyboard.pm:186
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (typewriter)"
msgstr "亞美尼亞 (typewriter)"

#: keyboard.pm:187
#, c-format
msgid ""
"_: keyboard\n"
"Armenian (phonetic)"
msgstr "亞美尼亞 (phonetic)"

#: keyboard.pm:188
#, c-format
msgid ""
"_: keyboard\n"
"Arabic"
msgstr "Arabic"

#: keyboard.pm:189
#, c-format
msgid ""
"_: keyboard\n"
"Azerbaidjani (latin)"
msgstr "蘇聯共和國 (latin)"

#: keyboard.pm:190
#, c-format
msgid ""
"_: keyboard\n"
"Belgian"
msgstr "比利時"

#: keyboard.pm:191
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Inscript-layout)"
msgstr "孟加拉 (Inscript 式配置)"

#: keyboard.pm:192
#, c-format
msgid ""
"_: keyboard\n"
"Bengali (Probhat)"
msgstr "孟加拉 (Probhat)"

#: keyboard.pm:193
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (phonetic)"
msgstr "保加利亞 (phonetic)"

#: keyboard.pm:194
#, c-format
msgid ""
"_: keyboard\n"
"Bulgarian (BDS)"
msgstr "保加利亞 (BDS)"

#: keyboard.pm:195
#, c-format
msgid ""
"_: keyboard\n"
"Brazilian (ABNT-2)"
msgstr "巴西 (ABNT-2)"

#: keyboard.pm:196
#, c-format
msgid ""
"_: keyboard\n"
"Bosnian"
msgstr "愛沙尼亞"

#: keyboard.pm:197
#, c-format
msgid ""
"_: keyboard\n"
"Belarusian"
msgstr ""
"白俄羅斯"

#: keyboard.pm:199
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (German layout)"
msgstr "瑞士 (德式配置)"

#: keyboard.pm:201
#, c-format
msgid ""
"_: keyboard\n"
"Swiss (French layout)"
msgstr ""
"瑞士 (法式配置)"

#: keyboard.pm:203
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Cherokee syllabics"
msgstr "Arabic"

#: keyboard.pm:205
#, c-format
msgid ""
"_: keyboard\n"
"Czech (QWERTY)"
msgstr "捷克 (QWERTY)"

#: keyboard.pm:207
#, c-format
msgid ""
"_: keyboard\n"
"German (no dead keys)"
msgstr "德語 (no dead keys)"

#: keyboard.pm:208
#, c-format
msgid ""
"_: keyboard\n"
"Devanagari"
msgstr ""
"梵文"

#: keyboard.pm:209
#, c-format
msgid ""
"_: keyboard\n"
"Danish"
msgstr "丹麥語"

#: keyboard.pm:210
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (US)"
msgstr "Dvorak (美式)"

#: keyboard.pm:212
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Esperanto)"
msgstr ""
"Dvorak (世界語)"

#: keyboard.pm:214
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (French)"
msgstr "Dvorak (法式)"

#: keyboard.pm:216
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (UK)"
msgstr "Dvorak (英式)"

#: keyboard.pm:217
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Norwegian)"
msgstr "Dvorak (挪威)"

#: keyboard.pm:219
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Polish)"
msgstr "Dvorak (波蘭)"

#: keyboard.pm:220
#, c-format
msgid ""
"_: keyboard\n"
"Dvorak (Swedish)"
msgstr "Dvorak (瑞典)"

#: keyboard.pm:221
#, c-format
msgid ""
"_: keyboard\n"
"Dzongkha/Tibetan"
msgstr "不丹宗卡語/泰語"

#: keyboard.pm:222
#, c-format
msgid ""
"_: keyboard\n"
"Estonian"
msgstr "愛沙尼亞"

#: keyboard.pm:226
#, c-format
msgid ""
"_: keyboard\n"
"Faroese"
msgstr "法羅語"

#: keyboard.pm:228
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Russian\" layout)"
msgstr "喬治亞 (\"俄式\" 配置)"

#: keyboard.pm:229
#, c-format
msgid ""
"_: keyboard\n"
"Georgian (\"Latin\" layout)"
msgstr "喬治亞 (\"拉丁式\" 配置)"

#: keyboard.pm:230
#, c-format
msgid ""
"_: keyboard\n"
"Greek"
msgstr "希臘"

#: keyboard.pm:231
#, c-format
msgid ""
"_: keyboard\n"
"Greek (polytonic)"
msgstr "希臘 (polytonic)"

#: keyboard.pm:232
#, c-format
msgid ""
"_: keyboard\n"
"Gujarati"
msgstr "古吉拉特語"

#: keyboard.pm:233
#, c-format
msgid ""
"_: keyboard\n"
"Gurmukhi"
msgstr "古爾穆希語"

#: keyboard.pm:235
#, c-format
msgid ""
"_: keyboard\n"
"Hungarian"
msgstr "匈牙利"

#: keyboard.pm:236
#, c-format
msgid ""
"_: keyboard\n"
"Croatian"
msgstr "克羅埃西亞"

#: keyboard.pm:237
#, c-format
msgid ""
"_: keyboard\n"
"Irish"
msgstr "愛爾蘭"

#: keyboard.pm:238
#, c-format
msgid ""
"_: keyboard\n"
"Israeli"
msgstr "以色列"

#: keyboard.pm:239
#, c-format
msgid ""
"_: keyboard\n"
"Israeli (phonetic)"
msgstr "以色列 (音標)"

#: keyboard.pm:240
#, c-format
msgid ""
"_: keyboard\n"
"Iranian"
msgstr "伊朗"

#: keyboard.pm:241
#, c-format
msgid ""
"_: keyboard\n"
"Icelandic"
msgstr "冰島"

#: keyboard.pm:242
#, c-format
msgid ""
"_: keyboard\n"
"Italian"
msgstr "義大利"

#: keyboard.pm:243
#, c-format
msgid ""
"_: keyboard\n"
"Inuktitut"
msgstr "伊努克梯圖語"

#: keyboard.pm:248
#, c-format
msgid ""
"_: keyboard\n"
"Japanese 106 keys"
msgstr "日本 106 鍵"

#: keyboard.pm:249
#, c-format
msgid ""
"_: keyboard\n"
"Kannada"
msgstr "卡納塔克語"

#: keyboard.pm:252
#, c-format
msgid ""
"_: keyboard\n"
"Korean"
msgstr "韓式鍵盤"

#: keyboard.pm:254
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Kurdish (arabic script)"
msgstr "庫德語 (arabic script)"

#: keyboard.pm:255
#, c-format
msgid ""
"_: keyboard\n"
"Kyrgyz"
msgstr "吉爾吉斯語"

#: keyboard.pm:256
#, c-format
msgid ""
"_: keyboard\n"
"Latin American"
msgstr "拉丁美洲"

#: keyboard.pm:257
#, c-format
msgid ""
"_: keyboard\n"
"Laotian"
msgstr "寮國"

#: keyboard.pm:259
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (old)"
msgstr "立陶宛 (舊 AZERTY 式)"

#: keyboard.pm:262
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian AZERTY (new)"
msgstr "立陶宛 (新 AZERTY 式)"

#: keyboard.pm:264
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"number row\" QWERTY"
msgstr "立陶宛 \"number row, QWERTY 式\""

#: keyboard.pm:266
#, c-format
msgid ""
"_: keyboard\n"
"Lithuanian \"phonetic\" QWERTY"
msgstr "立陶宛 \"phonetic, QWERTY 式\""

#: keyboard.pm:267
#, c-format
msgid ""
"_: keyboard\n"
"Latvian"
msgstr "拉托維亞"

#: keyboard.pm:268
#, c-format
msgid ""
"_: keyboard\n"
"Malayalam"
msgstr "馬拉雅拉姆語"

#: keyboard.pm:269
#, c-format
msgid ""
"_: keyboard\n"
"Macedonian"
msgstr "馬其頓"

#: keyboard.pm:270
#, c-format
msgid ""
"_: keyboard\n"
"Myanmar (Burmese)"
msgstr "緬甸語 (Burmese)"

#: keyboard.pm:271
#, c-format
msgid ""
"_: keyboard\n"
"Mongolian (cyrillic)"
msgstr "蒙古語 (cyrillic)"

#: keyboard.pm:272
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (UK)"
msgstr "馬爾他語 (UK)"

#: keyboard.pm:273
#, c-format
msgid ""
"_: keyboard\n"
"Maltese (US)"
msgstr "馬爾他語 (US)"

#: keyboard.pm:274
#, c-format
msgid ""
"_: keyboard\n"
"Dutch"
msgstr "荷蘭"

#: keyboard.pm:276
#, c-format
msgid ""
"_: keyboard\n"
"Oriya"
msgstr "奧里雅語"

#: keyboard.pm:277
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwerty layout)"
msgstr "波蘭 (qwerty 式配置)"

#: keyboard.pm:278
#, c-format
msgid ""
"_: keyboard\n"
"Polish (qwertz layout)"
msgstr "波蘭 (qwertz 式配置)"

#: keyboard.pm:280
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Pashto"
msgstr "波蘭"

#: keyboard.pm:281
#, c-format
msgid ""
"_: keyboard\n"
"Portuguese"
msgstr "葡萄牙"

#: keyboard.pm:283
#, c-format
msgid ""
"_: keyboard\n"
"Canadian (Quebec)"
msgstr "加拿大 (魁北克)"

#: keyboard.pm:285
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwertz)"
msgstr "羅馬尼亞 (qwertz)"

#: keyboard.pm:286
#, c-format
msgid ""
"_: keyboard\n"
"Romanian (qwerty)"
msgstr "羅馬尼亞 (qwerty)"

#: keyboard.pm:288
#, c-format
msgid ""
"_: keyboard\n"
"Russian (phonetic)"
msgstr "俄羅斯 (音標)"

#: keyboard.pm:289
#, c-format
msgid ""
"_: keyboard\n"
"Saami (norwegian)"
msgstr ""

#: keyboard.pm:290
#, c-format
msgid ""
"_: keyboard\n"
"Saami (swedish/finnish)"
msgstr ""

#: keyboard.pm:292
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Sindhi"
msgstr "泰式鍵盤"

#: keyboard.pm:294
#, c-format
msgid ""
"_: keyboard\n"
"Slovenian"
msgstr "斯洛法尼亞"

#: keyboard.pm:295
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTZ)"
msgstr "斯洛法克 (QWERTZ)"

#: keyboard.pm:296
#, c-format
msgid ""
"_: keyboard\n"
"Slovakian (QWERTY)"
msgstr "斯洛法克 (QWERTY)"

#: keyboard.pm:298
#, c-format
msgid ""
"_: keyboard\n"
"Serbian (cyrillic)"
msgstr "塞爾維亞 (cyrillic)"

#: keyboard.pm:299
#, c-format
msgid ""
"_: keyboard\n"
"Syriac"
msgstr "Syriac"

#: keyboard.pm:300
#, c-format
msgid ""
"_: keyboard\n"
"Syriac (phonetic)"
msgstr "利亞語 (phonetic)"

#: keyboard.pm:301
#, c-format
msgid ""
"_: keyboard\n"
"Telugu"
msgstr ""

#: keyboard.pm:303
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (ISCII-layout)"
msgstr "坦米爾 (ISCII-佈置)"

#: keyboard.pm:304
#, c-format
msgid ""
"_: keyboard\n"
"Tamil (Typewriter-layout)"
msgstr "亞美尼亞 (Typewriter-佈置)"

#: keyboard.pm:305
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Kedmanee)"
msgstr "泰式鍵盤"

#: keyboard.pm:306
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (TIS-820)"
msgstr "泰式鍵盤"

#: keyboard.pm:308
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Thai (Pattachote)"
msgstr "泰式鍵盤"

#: keyboard.pm:311
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Tifinagh (+latin/arabic)"
msgstr "南斯拉夫 (拉丁)"

#: keyboard.pm:313
#, c-format
msgid ""
"_: keyboard\n"
"Tajik"
msgstr "Tajik 鍵盤"

#: keyboard.pm:315
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Turkmen"
msgstr "德國"

#: keyboard.pm:316
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (traditional \"F\" model)"
msgstr "土耳其 (傳統式 \"F\" 型)"

#: keyboard.pm:317
#, c-format
msgid ""
"_: keyboard\n"
"Turkish (modern \"Q\" model)"
msgstr "土耳其 (現代式 \"Q\" 型)"

#: keyboard.pm:319
#, c-format
msgid ""
"_: keyboard\n"
"Ukrainian"
msgstr "烏克蘭"

#: keyboard.pm:322
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Urdu keyboard"
msgstr "韓式鍵盤"

#: keyboard.pm:324
#, c-format
msgid "US keyboard (international)"
msgstr "美式鍵盤 (國際型)"

#: keyboard.pm:325
#, fuzzy, c-format
msgid ""
"_: keyboard\n"
"Uzbek (cyrillic)"
msgstr "塞爾維亞 (cyrillic)"

#: keyboard.pm:327
#, c-format
msgid ""
"_: keyboard\n"
"Vietnamese \"numeric row\" QWERTY"
msgstr "越南 \"numeric row\" QWERTY 式"

#: keyboard.pm:328
#, c-format
msgid ""
"_: keyboard\n"
"Yugoslavian (latin)"
msgstr "南斯拉夫 (拉丁)"

#: keyboard.pm:335
#, c-format
msgid "Right Alt key"
msgstr "右方 Alt 按鍵"

#: keyboard.pm:336
#, c-format
msgid "Both Shift keys simultaneously"
msgstr "同時兩邊 Shift 按鍵"

#: keyboard.pm:337
#, c-format
msgid "Control and Shift keys simultaneously"
msgstr "Control 與 Shift 鍵同時"

#: keyboard.pm:338
#, c-format
msgid "CapsLock key"
msgstr "CapsLock 按鍵"

#: keyboard.pm:339
#, c-format
msgid "Shift and CapsLock keys simultaneously"
msgstr "Shift 與 CapsLock 鍵同時"

#: keyboard.pm:340
#, c-format
msgid "Ctrl and Alt keys simultaneously"
msgstr "Ctrl 與 Alt 鍵同時"

#: keyboard.pm:341
#, c-format
msgid "Alt and Shift keys simultaneously"
msgstr "Alt 與 Shift 鍵同時"

#: keyboard.pm:342
#, c-format
msgid "\"Menu\" key"
msgstr "\"選單\" 按鍵"

#: keyboard.pm:343
#, c-format
msgid "Left \"Windows\" key"
msgstr "左邊 \"Windows\" 按鍵"

#: keyboard.pm:344
#, c-format
msgid "Right \"Windows\" key"
msgstr "右邊 \"Windows\" 按鍵"

#: keyboard.pm:345
#, c-format
msgid "Both Control keys simultaneously"
msgstr "同時兩邊 Control 按鍵"

#: keyboard.pm:346
#, c-format
msgid "Both Alt keys simultaneously"
msgstr "同時兩邊 Alt 按鍵"

#: keyboard.pm:347
#, c-format
msgid "Left Shift key"
msgstr "左邊 Shift 按鍵"

#: keyboard.pm:348
#, c-format
msgid "Right Shift key"
msgstr "右邊 Shift 按鍵"

#: keyboard.pm:349
#, c-format
msgid "Left Alt key"
msgstr "左邊 Alt 按鍵"

#: keyboard.pm:350
#, c-format
msgid "Left Control key"
msgstr "左邊 Control 按鍵"

#: keyboard.pm:351
#, c-format
msgid "Right Control key"
msgstr "右邊 Control 按鍵"

#: keyboard.pm:387
#, c-format
msgid ""
"Here you can choose the key or key combination that will \n"
"allow switching between the different keyboard layouts\n"
"(eg: latin and non latin)"
msgstr ""
"請選擇按鍵或組合鍵, 以便於快速的切換不同的鍵盤配置\n"
"(eg: 拉丁與非拉丁)"

#: keyboard.pm:392
#, c-format
msgid ""
"This setting will be activated after the installation.\n"
"During installation, you will need to use the Right Control\n"
"key to switch between the different keyboard layouts."
msgstr ""

#. -PO: the string "default:LTR" can be translated *ONLY* as "default:LTR"
#: lang.pm:173
#, c-format
msgid "default:LTR"
msgstr "default:LTR"

#: lang.pm:190
#, c-format
msgid "Andorra"
msgstr "安道爾"

#: lang.pm:191
#: network/adsl_consts.pm:826
#, c-format
msgid "United Arab Emirates"
msgstr "阿拉伯聯合大公國"

#: lang.pm:192
#, c-format
msgid "Afghanistan"
msgstr "阿富汗"

#: lang.pm:193
#, c-format
msgid "Antigua and Barbuda"
msgstr "安地卡及巴布達"

#: lang.pm:194
#, c-format
msgid "Anguilla"
msgstr "安圭拉島"

#: lang.pm:195
#, c-format
msgid "Albania"
msgstr "阿爾巴尼亞"

#: lang.pm:196
#, c-format
msgid "Armenia"
msgstr "亞美尼亞"

#: lang.pm:197
#, c-format
msgid "Netherlands Antilles"
msgstr "荷屬安地列斯群島"

#: lang.pm:198
#, c-format
msgid "Angola"
msgstr "安哥拉"

#: lang.pm:199
#, c-format
msgid "Antarctica"
msgstr "南極洲"

#: lang.pm:200
#: network/adsl_consts.pm:40
#: standalone/drakxtv:50
#, c-format
msgid "Argentina"
msgstr "阿根廷"

#: lang.pm:201
#, c-format
msgid "American Samoa"
msgstr "美屬薩摩亞"

#: lang.pm:203
#: standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "澳洲"

#: lang.pm:204
#, c-format
msgid "Aruba"
msgstr "阿魯巴島"

#: lang.pm:205
#, c-format
msgid "Azerbaijan"
msgstr "阿塞拜然"

#: lang.pm:206
#, c-format
msgid "Bosnia and Herzegovina"
msgstr "波斯尼亞及黑塞哥維那"

#: lang.pm:207
#, c-format
msgid "Barbados"
msgstr "巴巴多斯島"

#: lang.pm:208
#, c-format
msgid "Bangladesh"
msgstr "孟加拉"

#: lang.pm:210
#, c-format
msgid "Burkina Faso"
msgstr "布吉納法索"

#: lang.pm:211
#: network/adsl_consts.pm:143
#: network/adsl_consts.pm:151
#, c-format
msgid "Bulgaria"
msgstr "保加利亞"

#: lang.pm:212
#, c-format
msgid "Bahrain"
msgstr "巴林"

#: lang.pm:213
#, c-format
msgid "Burundi"
msgstr "蒲隆地"

#: lang.pm:214
#, c-format
msgid "Benin"
msgstr "貝南"

#: lang.pm:215
#, c-format
msgid "Bermuda"
msgstr "百慕達"

#: lang.pm:216
#, c-format
msgid "Brunei Darussalam"
msgstr "汶萊"

#: lang.pm:217
#, c-format
msgid "Bolivia"
msgstr "玻利維亞"

#: lang.pm:218
#: network/adsl_consts.pm:109
#: network/adsl_consts.pm:119
#: network/adsl_consts.pm:127
#: network/adsl_consts.pm:135
#, c-format
msgid "Brazil"
msgstr "巴西"

#: lang.pm:219
#, c-format
msgid "Bahamas"
msgstr "巴哈馬"

#: lang.pm:220
#, c-format
msgid "Bhutan"
msgstr "不丹"

#: lang.pm:221
#, c-format
msgid "Bouvet Island"
msgstr "波維特島"

#: lang.pm:222
#, c-format
msgid "Botswana"
msgstr "波札那"

#: lang.pm:223
#, c-format
msgid "Belarus"
msgstr "白俄羅斯"

#: lang.pm:224
#, c-format
msgid "Belize"
msgstr "貝里斯"

#: lang.pm:225
#, c-format
msgid "Canada"
msgstr "加拿大"

#: lang.pm:226
#, c-format
msgid "Cocos (Keeling) Islands"
msgstr "可可斯群島"

#: lang.pm:227
#, c-format
msgid "Congo (Kinshasa)"
msgstr ""

#: lang.pm:228
#, c-format
msgid "Central African Republic"
msgstr "中非共和國"

#: lang.pm:229
#, c-format
msgid "Congo (Brazzaville)"
msgstr ""

#: lang.pm:231
#, c-format
msgid "Cote d'Ivoire"
msgstr "象牙海岸"

#: lang.pm:232
#, c-format
msgid "Cook Islands"
msgstr "庫克群島"

#: lang.pm:233
#, c-format
msgid "Chile"
msgstr "智利"

#: lang.pm:234
#, c-format
msgid "Cameroon"
msgstr "喀麥隆"

#: lang.pm:235
#: network/adsl_consts.pm:159
#: network/adsl_consts.pm:167
#: network/adsl_consts.pm:175
#: network/adsl_consts.pm:183
#: network/adsl_consts.pm:191
#: network/adsl_consts.pm:199
#: network/adsl_consts.pm:207
#: network/adsl_consts.pm:215
#: network/adsl_consts.pm:223
#: network/adsl_consts.pm:231
#: network/adsl_consts.pm:239
#: network/adsl_consts.pm:247
#: network/adsl_consts.pm:255
#: network/adsl_consts.pm:263
#: network/adsl_consts.pm:271
#: network/adsl_consts.pm:279
#: network/adsl_consts.pm:287
#: network/adsl_consts.pm:295
#: network/adsl_consts.pm:303
#: network/adsl_consts.pm:311
#, c-format
msgid "China"
msgstr "中國"

#: lang.pm:236
#, c-format
msgid "Colombia"
msgstr "哥倫比亞"

#: lang.pm:238
#, c-format
msgid "Serbia & Montenegro"
msgstr "塞爾維亞及芒特尼格羅共和國"

#: lang.pm:239
#, c-format
msgid "Cuba"
msgstr "古巴"

#: lang.pm:240
#, c-format
msgid "Cape Verde"
msgstr "維德角島"

#: lang.pm:241
#, c-format
msgid "Christmas Island"
msgstr "聖誕島"

#: lang.pm:242
#, c-format
msgid "Cyprus"
msgstr "賽普勒斯"

#: lang.pm:245
#, c-format
msgid "Djibouti"
msgstr "吉布地"

#: lang.pm:246
#: network/adsl_consts.pm:327
#, c-format
msgid "Denmark"
msgstr "丹麥"

#: lang.pm:247
#, c-format
msgid "Dominica"
msgstr "多米尼克聯邦"

#: lang.pm:248
#, c-format
msgid "Dominican Republic"
msgstr "多明尼加共和國"

#: lang.pm:249
#: network/adsl_consts.pm:30
#, c-format
msgid "Algeria"
msgstr "阿爾及利亞"

#: lang.pm:250
#, c-format
msgid "Ecuador"
msgstr "厄瓜多"

#: lang.pm:251
#, c-format
msgid "Estonia"
msgstr "愛沙尼亞"

#: lang.pm:252
#, c-format
msgid "Egypt"
msgstr "埃及"

#: lang.pm:253
#, c-format
msgid "Western Sahara"
msgstr "西撒哈拉"

#: lang.pm:254
#, c-format
msgid "Eritrea"
msgstr "厄利垂亞"

#: lang.pm:255
#: network/adsl_consts.pm:663
#: network/adsl_consts.pm:672
#: network/adsl_consts.pm:682
#: network/adsl_consts.pm:692
#: network/adsl_consts.pm:700
#: network/adsl_consts.pm:708
#: network/adsl_consts.pm:716
#: network/adsl_consts.pm:724
#: network/adsl_consts.pm:732
#: network/adsl_consts.pm:740
#: network/adsl_consts.pm:748
#: network/adsl_consts.pm:756
#: network/adsl_consts.pm:764
#, c-format
msgid "Spain"
msgstr "西班牙"

#: lang.pm:256
#, c-format
msgid "Ethiopia"
msgstr "依索比亞"

#: lang.pm:257
#: network/adsl_consts.pm:335
#, c-format
msgid "Finland"
msgstr "芬蘭"

#: lang.pm:258
#, c-format
msgid "Fiji"
msgstr "斐濟群島"

#: lang.pm:259
#, c-format
msgid "Falkland Islands (Malvinas)"
msgstr "福克蘭群島"

#: lang.pm:260
#, c-format
msgid "Micronesia"
msgstr "密克羅尼西亞"

#: lang.pm:261
#, c-format
msgid "Faroe Islands"
msgstr "法羅群島"

#: lang.pm:263
#, c-format
msgid "Gabon"
msgstr "加彭"

#: lang.pm:264
#: network/adsl_consts.pm:836
#: network/adsl_consts.pm:846
#: network/netconnect.pm:52
#, c-format
msgid "United Kingdom"
msgstr "英國"

#: lang.pm:265
#, c-format
msgid "Grenada"
msgstr "格瑞那達"

#: lang.pm:266
#, c-format
msgid "Georgia"
msgstr "喬治亞"

#: lang.pm:267
#, c-format
msgid "French Guiana"
msgstr "法屬幾內亞"

#: lang.pm:268
#, c-format
msgid "Ghana"
msgstr "迦納"

#: lang.pm:269
#, c-format
msgid "Gibraltar"
msgstr "直布羅陀"

#: lang.pm:270
#, c-format
msgid "Greenland"
msgstr "格陵蘭島"

#: lang.pm:271
#, c-format
msgid "Gambia"
msgstr "甘比亞"

#: lang.pm:272
#, c-format
msgid "Guinea"
msgstr "幾內亞"

#: lang.pm:273
#, c-format
msgid "Guadeloupe"
msgstr "瓜德魯普島"

#: lang.pm:274
#, c-format
msgid "Equatorial Guinea"
msgstr "赤道幾內亞"

#: lang.pm:276
#, c-format
msgid "South Georgia and the South Sandwich Islands"
msgstr ""

#: lang.pm:277
#, c-format
msgid "Guatemala"
msgstr "瓜地馬拉"

#: lang.pm:278
#, c-format
msgid "Guam"
msgstr "關島"

#: lang.pm:279
#, c-format
msgid "Guinea-Bissau"
msgstr "幾內亞比索"

#: lang.pm:280
#, c-format
msgid "Guyana"
msgstr "蓋亞那"

#: lang.pm:281
#, c-format
msgid "Hong Kong SAR (China)"
msgstr "香港 SAR (中國)"

#: lang.pm:282
#, c-format
msgid "Heard and McDonald Islands"
msgstr "赫德及麥當勞群島"

#: lang.pm:283
#, c-format
msgid "Honduras"
msgstr "宏都拉斯"

#: lang.pm:284
#, c-format
msgid "Croatia"
msgstr "克羅地亞"

#: lang.pm:285
#, c-format
msgid "Haiti"
msgstr "海地"

#: lang.pm:287
#, c-format
msgid "Indonesia"
msgstr "印度尼西亞"

#: lang.pm:288
#: network/adsl_consts.pm:471
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "愛爾蘭"

#: lang.pm:289
#: network/adsl_consts.pm:479
#, c-format
msgid "Israel"
msgstr "以色列"

#: lang.pm:290
#, c-format
msgid "India"
msgstr "印度"

#: lang.pm:291
#, c-format
msgid "British Indian Ocean Territory"
msgstr "大不列顛印度海洋領土"

#: lang.pm:292
#, c-format
msgid "Iraq"
msgstr "伊拉克"

#: lang.pm:293
#, c-format
msgid "Iran"
msgstr "伊朗"

#: lang.pm:294
#, c-format
msgid "Iceland"
msgstr "冰島"

#: lang.pm:296
#, c-format
msgid "Jamaica"
msgstr "牙買加"

#: lang.pm:297
#, c-format
msgid "Jordan"
msgstr "約旦"

#: lang.pm:298
#, c-format
msgid "Japan"
msgstr "日本"

#: lang.pm:299
#, c-format
msgid "Kenya"
msgstr "肯亞"

#: lang.pm:300
#, c-format
msgid "Kyrgyzstan"
msgstr "吉爾吉斯"

#: lang.pm:301
#, c-format
msgid "Cambodia"
msgstr "柬埔寨"

#: lang.pm:302
#, c-format
msgid "Kiribati"
msgstr "吉里巴斯"

#: lang.pm:303
#, c-format
msgid "Comoros"
msgstr "葛摩"

#: lang.pm:304
#, c-format
msgid "Saint Kitts and Nevis"
msgstr "聖克里斯多福"

#: lang.pm:305
#, c-format
msgid "Korea (North)"
msgstr "北韓"

#: lang.pm:306
#, c-format
msgid "Korea"
msgstr "韓國"

#: lang.pm:307
#, c-format
msgid "Kuwait"
msgstr "科威特"

#: lang.pm:308
#, c-format
msgid "Cayman Islands"
msgstr "開曼群島"

#: lang.pm:309
#, c-format
msgid "Kazakhstan"
msgstr "哈薩克"

#: lang.pm:310
#, c-format
msgid "Laos"
msgstr "寮國"

#: lang.pm:311
#, c-format
msgid "Lebanon"
msgstr "黎巴嫩"

#: lang.pm:312
#, c-format
msgid "Saint Lucia"
msgstr "聖露西亞"

#: lang.pm:313
#, c-format
msgid "Liechtenstein"
msgstr "列支敦斯登"

#: lang.pm:314
#, c-format
msgid "Sri Lanka"
msgstr "斯里蘭卡"

#: lang.pm:315
#, c-format
msgid "Liberia"
msgstr "利比利亞"

#: lang.pm:316
#, c-format
msgid "Lesotho"
msgstr "賴索托"

#: lang.pm:317
#: network/adsl_consts.pm:527
#, c-format
msgid "Lithuania"
msgstr "立陶宛"

#: lang.pm:318
#, c-format
msgid "Luxembourg"
msgstr "森堡"

#: lang.pm:319
#, c-format
msgid "Latvia"
msgstr "拉脫維亞"

#: lang.pm:320
#, c-format
msgid "Libya"
msgstr "利比亞"

#: lang.pm:321
#: network/adsl_consts.pm:535
#, c-format
msgid "Morocco"
msgstr "摩洛哥"

#: lang.pm:322
#, c-format
msgid "Monaco"
msgstr "摩納哥"

#: lang.pm:323
#, c-format
msgid "Moldova"
msgstr "摩爾多瓦"

#: lang.pm:324
#, c-format
msgid "Madagascar"
msgstr "馬達加斯加"

#: lang.pm:325
#, c-format
msgid "Marshall Islands"
msgstr "馬紹爾群島"

#: lang.pm:326
#, c-format
msgid "Macedonia"
msgstr "馬其頓"

#: lang.pm:327
#, c-format
msgid "Mali"
msgstr "馬里"

#: lang.pm:328
#, c-format
msgid "Myanmar"
msgstr "緬甸文字"

#: lang.pm:329
#, c-format
msgid "Mongolia"
msgstr "蒙古"

#: lang.pm:330
#, c-format
msgid "Northern Mariana Islands"
msgstr "北馬里亞納群島"

#: lang.pm:331
#, c-format
msgid "Martinique"
msgstr "聖馬丁節"

#: lang.pm:332
#, c-format
msgid "Mauritania"
msgstr "茅利塔尼亞"

#: lang.pm:333
#, c-format
msgid "Montserrat"
msgstr "蒙瑟拉特島"

#: lang.pm:334
#, c-format
msgid "Malta"
msgstr "馬爾他"

#: lang.pm:335
#, c-format
msgid "Mauritius"
msgstr "模里西斯"

#: lang.pm:336
#, c-format
msgid "Maldives"
msgstr "馬爾地夫"

#: lang.pm:337
#, c-format
msgid "Malawi"
msgstr "馬拉威"

#: lang.pm:338
#, c-format
msgid "Mexico"
msgstr "墨西哥"

#: lang.pm:339
#, c-format
msgid "Malaysia"
msgstr "馬來西亞"

#: lang.pm:340
#, c-format
msgid "Mozambique"
msgstr "莫三比克"

#: lang.pm:341
#, c-format
msgid "Namibia"
msgstr "納米比亞"

#: lang.pm:342
#, c-format
msgid "New Caledonia"
msgstr "新喀里多尼亞群島"

#: lang.pm:343
#, c-format
msgid "Niger"
msgstr "尼日"

#: lang.pm:344
#, c-format
msgid "Norfolk Island"
msgstr "諾福克群島"

#: lang.pm:345
#, c-format
msgid "Nigeria"
msgstr "奈及利亞"

#: lang.pm:346
#, c-format
msgid "Nicaragua"
msgstr "尼加拉瓜"

#: lang.pm:349
#, c-format
msgid "Nepal"
msgstr "尼泊爾"

#: lang.pm:350
#, c-format
msgid "Nauru"
msgstr "諾魯"

#: lang.pm:351
#, c-format
msgid "Niue"
msgstr "紐威島"

#: lang.pm:352
#, c-format
msgid "New Zealand"
msgstr "紐西蘭"

#: lang.pm:353
#, c-format
msgid "Oman"
msgstr "阿曼"

#: lang.pm:354
#, c-format
msgid "Panama"
msgstr "巴拿馬"

#: lang.pm:355
#, c-format
msgid "Peru"
msgstr "秘魯"

#: lang.pm:356
#, c-format
msgid "French Polynesia"
msgstr "法屬玻里尼西亞"

#: lang.pm:357
#, c-format
msgid "Papua New Guinea"
msgstr "巴布亞紐幾內亞"

#: lang.pm:358
#, c-format
msgid "Philippines"
msgstr "菲律賓"

#: lang.pm:359
#, c-format
msgid "Pakistan"
msgstr "巴基斯坦"

#: lang.pm:361
#, c-format
msgid "Saint Pierre and Miquelon"
msgstr "聖匹及密啟倫群島"

#: lang.pm:362
#, c-format
msgid "Pitcairn"
msgstr "皮特康"

#: lang.pm:363
#, c-format
msgid "Puerto Rico"
msgstr "波多黎各"

#: lang.pm:364
#, c-format
msgid "Palestine"
msgstr ""

#: lang.pm:365
#: network/adsl_consts.pm:634
#, c-format
msgid "Portugal"
msgstr "葡萄牙"

#: lang.pm:366
#, c-format
msgid "Paraguay"
msgstr "巴拉圭"

#: lang.pm:367
#, c-format
msgid "Palau"
msgstr "帛琉群島"

#: lang.pm:368
#, c-format
msgid "Qatar"
msgstr "卡達"

#: lang.pm:369
#, c-format
msgid "Reunion"
msgstr "留尼旺"

#: lang.pm:370
#, c-format
msgid "Romania"
msgstr "羅馬尼亞"

#: lang.pm:371
#: network/adsl_consts.pm:642
#, c-format
msgid "Russia"
msgstr "蘇俄"

#: lang.pm:372
#, c-format
msgid "Rwanda"
msgstr "盧旺達"

#: lang.pm:373
#, c-format
msgid "Saudi Arabia"
msgstr "沙烏地阿拉伯"

#: lang.pm:374
#, c-format
msgid "Solomon Islands"
msgstr "所羅門群島"

#: lang.pm:375
#, c-format
msgid "Seychelles"
msgstr "塞席爾"

#: lang.pm:376
#, c-format
msgid "Sudan"
msgstr "蘇丹"

#: lang.pm:378
#, c-format
msgid "Singapore"
msgstr "新加坡"

#: lang.pm:379
#, c-format
msgid "Saint Helena"
msgstr "聖赫勒拿島"

#: lang.pm:380
#: network/adsl_consts.pm:652
#, c-format
msgid "Slovenia"
msgstr "斯洛維尼亞"

#: lang.pm:381
#, c-format
msgid "Svalbard and Jan Mayen Islands"
msgstr "斯瓦巴及尖棉島"

#: lang.pm:383
#, c-format
msgid "Sierra Leone"
msgstr "獅子山"

#: lang.pm:384
#, c-format
msgid "San Marino"
msgstr "聖馬利諾"

#: lang.pm:385
#, c-format
msgid "Senegal"
msgstr "塞內加爾"

#: lang.pm:386
#, c-format
msgid "Somalia"
msgstr "索馬利亞"

#: lang.pm:387
#, c-format
msgid "Suriname"
msgstr "蘇里南"

#: lang.pm:388
#, c-format
msgid "Sao Tome and Principe"
msgstr "聖多美普林西比"

#: lang.pm:389
#, c-format
msgid "El Salvador"
msgstr "薩爾瓦多"

#: lang.pm:390
#, c-format
msgid "Syria"
msgstr "敘利亞"

#: lang.pm:391
#, c-format
msgid "Swaziland"
msgstr "史瓦濟蘭"

#: lang.pm:392
#, c-format
msgid "Turks and Caicos Islands"
msgstr "土克斯及開科斯群島"

#: lang.pm:393
#, c-format
msgid "Chad"
msgstr "查德"

#: lang.pm:394
#, c-format
msgid "French Southern Territories"
msgstr "法屬南部屬地"

#: lang.pm:395
#, c-format
msgid "Togo"
msgstr "多哥"

#: lang.pm:396
#: network/adsl_consts.pm:806
#, c-format
msgid "Thailand"
msgstr "泰國"

#: lang.pm:397
#, c-format
msgid "Tajikistan"
msgstr "塔吉克"

#: lang.pm:398
#, c-format
msgid "Tokelau"
msgstr "托克勞群島"

#: lang.pm:399
#, c-format
msgid "East Timor"
msgstr "東帝汶"

#: lang.pm:400
#, c-format
msgid "Turkmenistan"
msgstr "土庫曼"

#: lang.pm:401
#: network/adsl_consts.pm:816
#, c-format
msgid "Tunisia"
msgstr "突尼西亞"

#: lang.pm:402
#, c-format
msgid "Tonga"
msgstr "東加"

#: lang.pm:403
#, c-format
msgid "Turkey"
msgstr "土耳其"

#: lang.pm:404
#, c-format
msgid "Trinidad and Tobago"
msgstr "千里達及托巴哥"

#: lang.pm:405
#, c-format
msgid "Tuvalu"
msgstr "吐瓦魯"

#: lang.pm:407
#, c-format
msgid "Tanzania"
msgstr "坦尚尼亞"

#: lang.pm:408
#, c-format
msgid "Ukraine"
msgstr "烏克蘭"

#: lang.pm:409
#, c-format
msgid "Uganda"
msgstr "烏干達"

#: lang.pm:410
#, c-format
msgid "United States Minor Outlying Islands"
msgstr "美屬邊疆群島"

#: lang.pm:412
#, c-format
msgid "Uruguay"
msgstr "烏拉圭"

#: lang.pm:413
#, c-format
msgid "Uzbekistan"
msgstr "烏茲別克"

#: lang.pm:414
#, c-format
msgid "Vatican"
msgstr "梵諦岡"

#: lang.pm:415
#, c-format
msgid "Saint Vincent and the Grenadines"
msgstr "聖文森及格瑞那丁"

#: lang.pm:416
#, c-format
msgid "Venezuela"
msgstr "委內瑞拉"

#: lang.pm:417
#, c-format
msgid "Virgin Islands (British)"
msgstr "英屬維爾京群島"

#: lang.pm:418
#, c-format
msgid "Virgin Islands (U.S.)"
msgstr "美屬維爾京群島"

#: lang.pm:419
#, c-format
msgid "Vietnam"
msgstr "越南"

#: lang.pm:420
#, c-format
msgid "Vanuatu"
msgstr "萬那杜"

#: lang.pm:421
#, c-format
msgid "Wallis and Futuna"
msgstr ""

#: lang.pm:422
#, c-format
msgid "Samoa"
msgstr "薩摩亞群島"

#: lang.pm:423
#, c-format
msgid "Yemen"
msgstr "葉門"

#: lang.pm:424
#, c-format
msgid "Mayotte"
msgstr "美亞特"

#: lang.pm:425
#: standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "南非"

#: lang.pm:426
#, c-format
msgid "Zambia"
msgstr "尚比亞"

#: lang.pm:427
#, c-format
msgid "Zimbabwe"
msgstr "辛巴威"

#: lang.pm:1040
#, c-format
msgid "You should install the following packages: %s"
msgstr "您應該安裝下列套件： %s"

#. -PO: the following is used to combine packages names. eg: "initscripts, harddrake, yudit"
#: lang.pm:1043
#: standalone/scannerdrake:135
#, c-format
msgid ", "
msgstr ", "

#: lang.pm:1094
#, c-format
msgid "Welcome to %s"
msgstr "歡迎使用 %s"

#: loopback.pm:31
#, c-format
msgid "Circular mounts %s\n"
msgstr "循環掛載 %s\n"

#: lvm.pm:111
#, c-format
msgid "Remove the logical volumes first\n"
msgstr "先移除邏輯 volume\n"

#: modules/interactive.pm:21
#: standalone/drakconnect:1032
#, c-format
msgid "Parameters"
msgstr "參數"

#: modules/interactive.pm:21
#: standalone/draksec:51
#, c-format
msgid "NONE"
msgstr "無"

#: modules/interactive.pm:22
#, c-format
msgid "Module configuration"
msgstr "模組組態設定"

#: modules/interactive.pm:22
#, c-format
msgid "You can configure each parameter of the module here."
msgstr "您可以在這邊輸入該模組的每一個參數。"

#: modules/interactive.pm:63
#, c-format
msgid "Found %s interfaces"
msgstr "找到 %s 介面"

#: modules/interactive.pm:64
#, c-format
msgid "Do you have another one?"
msgstr "您還有其他的嗎？"

#: modules/interactive.pm:65
#, c-format
msgid "Do you have any %s interfaces?"
msgstr "你是否有任何 %s 介面？"

#: modules/interactive.pm:71
#, c-format
msgid "See hardware info"
msgstr "觀看硬體資訊"

#: modules/interactive.pm:82
#, c-format
msgid "Installing driver for USB controller"
msgstr "正在安裝 USB 控制器的驅動程式"

#: modules/interactive.pm:83
#, c-format
msgid "Installing driver for firewire controller %s"
msgstr "正在安裝 Firewire 控制器的驅動程式 %s"

#: modules/interactive.pm:84
#, c-format
msgid "Installing driver for hard drive controller %s"
msgstr "正在安裝硬碟控制器的驅動程式 %s"

#: modules/interactive.pm:85
#, c-format
msgid "Installing driver for ethernet controller %s"
msgstr "正在安裝網路卡控制器的驅動程式 %s"

#. -PO: the first %s is the card type (scsi, network, sound,...)
#: modules/interactive.pm:96
#, c-format
msgid "Installing driver for %s card %s"
msgstr "正在安裝 %s 卡的驅動程式 %s"

#: modules/interactive.pm:99
#, c-format
msgid "(module %s)"
msgstr "(模組 %s)"

#: modules/interactive.pm:109
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Note that any address should be entered with the prefix 0x like '0x123'"
msgstr ""
"您現在可以為模組 %s 提供選項。\n"
"請注意，您輸入的記憶體位置以 0x 開頭，例如 '0x123'"

#: modules/interactive.pm:115
#, c-format
msgid ""
"You may now provide options to module %s.\n"
"Options are in format ``name=value name2=value2 ...''.\n"
"For instance, ``io=0x300 irq=7''"
msgstr ""
"您現在可以為模組 %s 提供選項。\n"
"選項的格式為 ``name=value name2=value2 ...''\n"
"例如 ``io=0x300 irq=7''"

#: modules/interactive.pm:117
#, c-format
msgid "Module options:"
msgstr "模組選項："

#. -PO: the %s is the driver type (scsi, network, sound,...)
#: modules/interactive.pm:130
#, c-format
msgid "Which %s driver should I try?"
msgstr "我應該試那個 %s 驅動程式呢？"

#: modules/interactive.pm:139
#, c-format
msgid ""
"In some cases, the %s driver needs to have extra information to work\n"
"properly, although it normally works fine without them. Would you like to specify\n"
"extra options for it or allow the driver to probe your machine for the\n"
"information it needs? Occasionally, probing will hang a computer, but it should\n"
"not cause any damage."
msgstr ""
"某些時候, %s 驅動程式需要有附加的資訊以便適當工作,\n"
"雖然它正常來說可以沒有他們而好好的工作. 您想要指定附加的選項給它嗎\n"
"或是允許驅動程式偵測您的機器需要取得驅動程式需要的資訊?有時候偵測會讓電腦當機, 不過應該不至於造成任何傷害才對."

#: modules/interactive.pm:143
#, c-format
msgid "Autoprobe"
msgstr "自動偵測"

#: modules/interactive.pm:143
#, c-format
msgid "Specify options"
msgstr "指定選項"

#: modules/interactive.pm:155
#, c-format
msgid ""
"Loading module %s failed.\n"
"Do you want to try again with other parameters?"
msgstr ""
"載入 %s 模組失敗.\n"
"您要用其他參數再試一次嗎?"

#: modules/parameters.pm:49
#, c-format
msgid "a number"
msgstr "一個數字"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated numbers"
msgstr "%d 用分號分隔的數字"

#: modules/parameters.pm:51
#, c-format
msgid "%d comma separated strings"
msgstr "%d 用分號分隔的字串"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated numbers"
msgstr "用逗號分隔的數字"

#: modules/parameters.pm:53
#, c-format
msgid "comma separated strings"
msgstr "用逗號分隔的字串"

#: mouse.pm:25
#, c-format
msgid "Sun - Mouse"
msgstr "Sun - 滑鼠"

#: mouse.pm:31
#: security/level.pm:12
#, c-format
msgid "Standard"
msgstr "標準"

#: mouse.pm:32
#, c-format
msgid "Logitech MouseMan+"
msgstr "Logitech MouseMan+"

#: mouse.pm:33
#, c-format
msgid "Generic PS2 Wheel Mouse"
msgstr "一般 PS/2 滾輪滑鼠"

#: mouse.pm:34
#, c-format
msgid "GlidePoint"
msgstr "GlidePoint"

#: mouse.pm:36
#: network/modem.pm:58
#: network/modem.pm:59
#: network/modem.pm:60
#: network/modem.pm:85
#: network/modem.pm:99
#: network/modem.pm:104
#: network/modem.pm:137
#: network/netconnect.pm:645
#: network/netconnect.pm:650
#: network/netconnect.pm:662
#: network/netconnect.pm:667
#: network/netconnect.pm:683
#: network/netconnect.pm:685
#, c-format
msgid "Automatic"
msgstr "自動"

#: mouse.pm:39
#: mouse.pm:73
#, c-format
msgid "Kensington Thinking Mouse"
msgstr "Kensington Thinking Mouse"

#: mouse.pm:40
#: mouse.pm:68
#, c-format
msgid "Genius NetMouse"
msgstr "Genius NetMouse"

#: mouse.pm:41
#, c-format
msgid "Genius NetScroll"
msgstr "Genius NetScroll"

#: mouse.pm:42
#: mouse.pm:52
#, c-format
msgid "Microsoft Explorer"
msgstr "Microsoft Explorer"

#: mouse.pm:47
#: mouse.pm:79
#, c-format
msgid "1 button"
msgstr "一個按鍵"

#: mouse.pm:48
#: mouse.pm:57
#, c-format
msgid "Generic 2 Button Mouse"
msgstr "一般的兩鍵式滑鼠"

#: mouse.pm:50
#: mouse.pm:59
#, c-format
msgid "Generic 3 Button Mouse with Wheel emulation"
msgstr "一般的三鍵式滑鼠有滾輪模擬"

#: mouse.pm:51
#, c-format
msgid "Wheel"
msgstr "滾輪"

#: mouse.pm:55
#, c-format
msgid "serial"
msgstr "序列"

#: mouse.pm:58
#, c-format
msgid "Generic 3 Button Mouse"
msgstr "一般的三鍵式滑鼠"

#: mouse.pm:60
#, c-format
msgid "Microsoft IntelliMouse"
msgstr "Microsoft IntelliMouse"

#: mouse.pm:61
#, c-format
msgid "Logitech MouseMan"
msgstr "Logitech Bus Mouse"

#: mouse.pm:62
#, c-format
msgid "Logitech MouseMan with Wheel emulation"
msgstr "有滾輪模擬的 Logitech MouseMan"

#: mouse.pm:63
#, c-format
msgid "Mouse Systems"
msgstr "Mouse Systems"

#: mouse.pm:65
#, c-format
msgid "Logitech CC Series"
msgstr "Logitech CC Series"

#: mouse.pm:66
#, c-format
msgid "Logitech CC Series with Wheel emulation"
msgstr "有滾輪模擬的 Logitech CC Series"

#: mouse.pm:67
#, c-format
msgid "Logitech MouseMan+/FirstMouse+"
msgstr "Logitech MouseMan+/FirstMouse+"

#: mouse.pm:69
#, c-format
msgid "MM Series"
msgstr "MM Series"

#: mouse.pm:70
#, c-format
msgid "MM HitTablet"
msgstr "MM HitTablet"

#: mouse.pm:71
#, c-format
msgid "Logitech Mouse (serial, old C7 type)"
msgstr "Logitech Mouse (serial, old C7 type)"

#: mouse.pm:72
#, c-format
msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
msgstr "有滾輪模擬的 Logitech Mouse (serial, old C7 type)"

#: mouse.pm:74
#, c-format
msgid "Kensington Thinking Mouse with Wheel emulation"
msgstr "有滾輪模擬的 Kensington Thinking Mouse"

#: mouse.pm:77
#, c-format
msgid "busmouse"
msgstr "busmouse"

#: mouse.pm:80
#, c-format
msgid "2 buttons"
msgstr "兩個按鍵"

#: mouse.pm:81
#, c-format
msgid "3 buttons"
msgstr "三個按鍵"

#: mouse.pm:82
#, c-format
msgid "3 buttons with Wheel emulation"
msgstr "有滾輪模擬的三個按鍵"

#: mouse.pm:86
#, c-format
msgid "Universal"
msgstr "通用"

#: mouse.pm:88
#, c-format
msgid "Any PS/2 & USB mice"
msgstr "任何 PS/2 與 USB 滑鼠"

#: mouse.pm:89
#, fuzzy, c-format
msgid "Microsoft Xbox Controller S"
msgstr "Microsoft Explorer"

#: mouse.pm:89
#: mouse.pm:359
#: mouse.pm:368
#: mouse.pm:420
#, c-format
msgid "Synaptics Touchpad"
msgstr ""

#: mouse.pm:93
#: standalone/drakconnect:360
#: standalone/drakvpn:1140
#, c-format
msgid "none"
msgstr "無"

#: mouse.pm:95
#, c-format
msgid "No mouse"
msgstr "無滑鼠"

#: mouse.pm:546
#, c-format
msgid "Please test the mouse"
msgstr "請測試滑鼠"

#: mouse.pm:548
#, c-format
msgid "To activate the mouse,"
msgstr "為了驅動您的滑鼠"

#: mouse.pm:549
#, c-format
msgid "MOVE YOUR WHEEL!"
msgstr "請滾動您的滾輪！"

#: network/adsl.pm:19
#, c-format
msgid "use PPPoE"
msgstr "使用 PPPoE"

#: network/adsl.pm:20
#, c-format
msgid "use PPTP"
msgstr "使用 PPTP"

#: network/adsl.pm:21
#, c-format
msgid "use DHCP"
msgstr "使用 DHCP"

#: network/adsl.pm:22
#, c-format
msgid "Alcatel Speedtouch USB"
msgstr "Alcatel Speedtouch USB"

#: network/adsl.pm:22
#: network/adsl.pm:23
#: network/adsl.pm:24
#, c-format
msgid " - detected"
msgstr " - 已偵測到"

#: network/adsl.pm:23
#, c-format
msgid "Sagem (using PPPoA) USB"
msgstr ""

#: network/adsl.pm:24
#, c-format
msgid "Sagem (using DHCP) USB"
msgstr ""

#: network/adsl.pm:35
#: network/netconnect.pm:839
#, c-format
msgid "Connect to the Internet"
msgstr "連線到 Internet"

#: network/adsl.pm:36
#: network/netconnect.pm:840
#, c-format
msgid ""
"The most common way to connect with adsl is pppoe.\n"
"Some connections use PPTP, a few use DHCP.\n"
"If you do not know, choose 'use PPPoE'"
msgstr ""
"最常連線到 ADSL 的方法就是使用 pppoe.\n"
"有些連線是使用 PPTP, 有些事使用 DHCP.\n"
"若是您不清楚的話, 選擇 '使用 PPPoE'"

#: network/adsl.pm:41
#: network/netconnect.pm:844
#, c-format
msgid "ADSL connection type:"
msgstr "ADSL 連線型態:"

#: network/drakfirewall.pm:12
#: share/compssUsers.pl:84
#, c-format
msgid "Web Server"
msgstr "Web 伺服器"

#: network/drakfirewall.pm:17
#, c-format
msgid "Domain Name Server"
msgstr "網域名稱伺服器"

#: network/drakfirewall.pm:22
#, c-format
msgid "SSH server"
msgstr "SSH 伺服器"

#: network/drakfirewall.pm:27
#, c-format
msgid "FTP server"
msgstr "FTP 伺服器"

#: network/drakfirewall.pm:32
#, c-format
msgid "Mail Server"
msgstr "Mail 伺服器"

#: network/drakfirewall.pm:37
#, c-format
msgid "POP and IMAP Server"
msgstr "POP 與 IMAP 伺服器"

#: network/drakfirewall.pm:42
#, c-format
msgid "Telnet server"
msgstr "Telnet 伺服器"

#: network/drakfirewall.pm:48
#, c-format
msgid "Windows Files Sharing (SMB)"
msgstr "Wndows 檔案分享 (SMB)"

#: network/drakfirewall.pm:54
#, c-format
msgid "CUPS server"
msgstr "CUPS 伺服器"

#: network/drakfirewall.pm:60
#, c-format
msgid "Echo request (ping)"
msgstr "回應要求 (ping)"

#: network/drakfirewall.pm:65
#, c-format
msgid "BitTorrent"
msgstr "BitTorrent"

#: network/drakfirewall.pm:131
#, c-format
msgid "No network card"
msgstr "無網路卡"

#: network/drakfirewall.pm:152
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"This configures a personal firewall for this Mandrakelinux machine.\n"
"For a powerful and dedicated firewall solution, please look to the\n"
"specialized MandrakeSecurity Firewall distribution."
msgstr ""
"drakfirewall 設定程式\n"
"\n"
"這是用來設定個人防火牆給 Mandrakelinux 機器.\n"
"若是您需要很致力強大的防火牆解決方案, 請您參閱\n"
"專門的 MandrakeSecurity Firewall distribution 產品資訊."

#: network/drakfirewall.pm:158
#, c-format
msgid ""
"drakfirewall configurator\n"
"\n"
"Make sure you have configured your Network/Internet access with\n"
"drakconnect before going any further."
msgstr ""

#: network/drakfirewall.pm:175
#, c-format
msgid "Which services would you like to allow the Internet to connect to?"
msgstr "那一種服務您要允許網際網路來連線呢?"

#: network/drakfirewall.pm:176
#, c-format
msgid ""
"You can enter miscellaneous ports. \n"
"Valid examples are: 139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"Have a look at /etc/services for information."
msgstr ""
"您可以輸入各種的 port.\n"
"有效的例子為:  139/tcp 139/udp 600:610/tcp 600:610/udp.\n"
"查看 /etc/services 以取得資訊."

#: network/drakfirewall.pm:182
#, c-format
msgid ""
"Invalid port given: %s.\n"
"The proper format is \"port/tcp\" or \"port/udp\", \n"
"where port is between 1 and 65535.\n"
"\n"
"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""

#: network/drakfirewall.pm:192
#, c-format
msgid "Everything (no firewall)"
msgstr "全部 (沒有 firewall)"

#: network/drakfirewall.pm:194
#, c-format
msgid "Other ports"
msgstr "其它埠"

#: network/isdn.pm:125
#: network/netconnect.pm:490
#: network/netconnect.pm:602
#: network/netconnect.pm:605
#, c-format
msgid "Unlisted - edit manually"
msgstr ""

#: network/isdn.pm:168
#: network/netconnect.pm:422
#, c-format
msgid "ISA / PCMCIA"
msgstr "ISA / PCMCIA"

#: network/isdn.pm:168
#: network/netconnect.pm:422
#, c-format
msgid "I do not know"
msgstr "我不清楚"

#: network/isdn.pm:169
#: network/netconnect.pm:422
#, c-format
msgid "PCI"
msgstr "PCI"

#: network/isdn.pm:170
#: network/netconnect.pm:422
#, c-format
msgid "USB"
msgstr "USB"

#: network/modem.pm:58
#: network/modem.pm:59
#: network/modem.pm:60
#: network/netconnect.pm:650
#: network/netconnect.pm:667
#: network/netconnect.pm:683
#, c-format
msgid "Manual"
msgstr "手動"

#: network/netconnect.pm:90
#: network/netconnect.pm:519
#: network/netconnect.pm:523
#, c-format
msgid "Manual choice"
msgstr "手動選擇"

#: network/netconnect.pm:90
#, c-format
msgid "Internal ISDN card"
msgstr "內部 ISDN 卡"

#: network/netconnect.pm:100
#, c-format
msgid "Ad-hoc"
msgstr ""

#: network/netconnect.pm:101
#, c-format
msgid "Managed"
msgstr ""

#: network/netconnect.pm:102
#, c-format
msgid "Master"
msgstr ""

#: network/netconnect.pm:103
#, c-format
msgid "Repeater"
msgstr "重複器"

#: network/netconnect.pm:104
#, c-format
msgid "Secondary"
msgstr "第二的"

#: network/netconnect.pm:105
#, c-format
msgid "Auto"
msgstr "自動"

#: network/netconnect.pm:108
#: printer/printerdrake.pm:1354
#: standalone/drakups:75
#, c-format
msgid "Manual configuration"
msgstr "手動組態設定"

#: network/netconnect.pm:109
#, c-format
msgid "Automatic IP (BOOTP/DHCP)"
msgstr "自動 IP (BOOTP/DHCP)"

#: network/netconnect.pm:111
#, c-format
msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr "自動 IP (BOOTP/DHCP/Zeroconf)"

#: network/netconnect.pm:114
#, c-format
msgid "Protocol for the rest of the world"
msgstr "其他世界的的通訊協定"

#: network/netconnect.pm:116
#: standalone/drakconnect:541
#, c-format
msgid "European protocol (EDSS1)"
msgstr "歐洲人的通訊協定 (EDSS1)"

#: network/netconnect.pm:117
#: standalone/drakconnect:542
#, c-format
msgid ""
"Protocol for the rest of the world\n"
"No D-Channel (leased lines)"
msgstr ""
"其他世界的通訊協定\n"
"無 D-Channel (leased lines)"

#: network/netconnect.pm:153
#, c-format
msgid "Alcatel speedtouch USB modem"
msgstr "Alcatel speedtouch USB 數據機"

#: network/netconnect.pm:154
#, c-format
msgid "Sagem USB modem"
msgstr "Sagem USB 數據機"

#: network/netconnect.pm:155
#, c-format
msgid "Bewan modem"
msgstr "Bewan 數據機"

#: network/netconnect.pm:156
#, c-format
msgid "ECI Hi-Focus modem"
msgstr "ECI Hi-Focus 數據機"

#: network/netconnect.pm:160
#, c-format
msgid "Dynamic Host Configuration Protocol (DHCP)"
msgstr ""

#: network/netconnect.pm:161
#, c-format
msgid "Manual TCP/IP configuration"
msgstr "手動組態設定 TCP/IP"

#: network/netconnect.pm:162
#, c-format
msgid "Point to Point Tunneling Protocol (PPTP)"
msgstr ""

#: network/netconnect.pm:163
#, c-format
msgid "PPP over Ethernet (PPPoE)"
msgstr ""

#: network/netconnect.pm:164
#, c-format
msgid "PPP over ATM (PPPoA)"
msgstr ""

#: network/netconnect.pm:165
#, c-format
msgid "DSL over CAPI"
msgstr ""

#: network/netconnect.pm:169
#, c-format
msgid "Bridged Ethernet LLC"
msgstr ""

#: network/netconnect.pm:170
#, c-format
msgid "Bridged Ethernet VC"
msgstr ""

#: network/netconnect.pm:171
#, c-format
msgid "Routed IP LLC"
msgstr ""

#: network/netconnect.pm:172
#, c-format
msgid "Routed IP VC"
msgstr ""

#: network/netconnect.pm:173
#, c-format
msgid "PPPoA LLC"
msgstr ""

#: network/netconnect.pm:174
#, c-format
msgid "PPPoA VC"
msgstr ""

#: network/netconnect.pm:178
#: standalone/drakconnect:476
#, c-format
msgid "Script-based"
msgstr "Script-based"

#: network/netconnect.pm:179
#: standalone/drakconnect:476
#, c-format
msgid "PAP"
msgstr "PAP"

#: network/netconnect.pm:180
#: standalone/drakconnect:476
#, c-format
msgid "Terminal-based"
msgstr "Terminal-based"

#: network/netconnect.pm:181
#: standalone/drakconnect:476
#, c-format
msgid "CHAP"
msgstr "CHAP"

#: network/netconnect.pm:182
#: standalone/drakconnect:476
#, c-format
msgid "PAP/CHAP"
msgstr "PAP/CHAP"

#: network/netconnect.pm:238
#: standalone/drakconnect:59
#, c-format
msgid "Network & Internet Configuration"
msgstr "網路 & 網際網路設定"

#: network/netconnect.pm:244
#, c-format
msgid "(detected on port %s)"
msgstr "(於 port %s 被偵測到)"

#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
#: network/netconnect.pm:246
#, c-format
msgid "(detected %s)"
msgstr "(偵測到 %s)"

#: network/netconnect.pm:246
#, c-format
msgid "(detected)"
msgstr "(被偵測到)"

#: network/netconnect.pm:248
#, c-format
msgid "Modem connection"
msgstr "Modem 連線"

#: network/netconnect.pm:249
#, c-format
msgid "ISDN connection"
msgstr "ISDN 連線"

#: network/netconnect.pm:250
#, c-format
msgid "ADSL connection"
msgstr "ADSL 連線"

#: network/netconnect.pm:251
#, c-format
msgid "Cable connection"
msgstr "Cable 連線"

#: network/netconnect.pm:252
#, c-format
msgid "LAN connection"
msgstr "區域網路連線"

#: network/netconnect.pm:253
#: network/netconnect.pm:267
#, c-format
msgid "Wireless connection"
msgstr "無線網路連線"

#: network/netconnect.pm:263
#, c-format
msgid "Choose the connection you want to configure"
msgstr "選擇您要設定的連線項目"

#: network/netconnect.pm:277
#, c-format
msgid ""
"We are now going to configure the %s connection.\n"
"\n"
"\n"
"Press \"%s\" to continue."
msgstr ""
"我們現在正要設定 %s 連線.\n"
"\n"
"\n"
"按 \"%s\" 繼續."

#: network/netconnect.pm:285
#: network/netconnect.pm:879
#, c-format
msgid "Connection Configuration"
msgstr "連線組態設定"

#: network/netconnect.pm:286
#: network/netconnect.pm:880
#, c-format
msgid "Please fill or check the field below"
msgstr "請您填入或檢查下面欄位"

#: network/netconnect.pm:293
#: standalone/drakconnect:532
#, c-format
msgid "Card IRQ"
msgstr "卡的 IRQ"

#: network/netconnect.pm:294
#: standalone/drakconnect:533
#, c-format
msgid "Card mem (DMA)"
msgstr "卡的 mem (DMA)"

#: network/netconnect.pm:295
#: standalone/drakconnect:534
#, c-format
msgid "Card IO"
msgstr "卡的 IO"

#: network/netconnect.pm:296
#: standalone/drakconnect:535
#, c-format
msgid "Card IO_0"
msgstr "卡的 IO_0"

#: network/netconnect.pm:297
#, c-format
msgid "Card IO_1"
msgstr "卡的 IO_1"

#: network/netconnect.pm:298
#, c-format
msgid "Your personal phone number"
msgstr "您的個人電話號碼"

#: network/netconnect.pm:299
#: network/netconnect.pm:883
#, c-format
msgid "Provider name (ex provider.net)"
msgstr "提供者的名稱 (ex provider.net)"

#: network/netconnect.pm:300
#: standalone/drakconnect:471
#, c-format
msgid "Provider phone number"
msgstr "提供者的電話號碼"

#: network/netconnect.pm:301
#, c-format
msgid "Provider DNS 1 (optional)"
msgstr "提供者 DNS 1 (選擇性輸入)"

#: network/netconnect.pm:302
#, c-format
msgid "Provider DNS 2 (optional)"
msgstr "提供者 DNS 2 (選擇性輸入)"

#: network/netconnect.pm:303
#: standalone/drakconnect:422
#, c-format
msgid "Dialing mode"
msgstr "撥接的模式"

#: network/netconnect.pm:304
#: standalone/drakconnect:427
#: standalone/drakconnect:495
#, c-format
msgid "Connection speed"
msgstr "連線速度"

#: network/netconnect.pm:305
#: standalone/drakconnect:432
#, c-format
msgid "Connection timeout (in sec)"
msgstr "連線逾時 (以秒為單位)"

#: network/netconnect.pm:308
#: network/netconnect.pm:329
#: network/netconnect.pm:886
#: standalone/drakconnect:469
#, c-format
msgid "Account Login (user name)"
msgstr "帳號登入 (使用者名稱)"

#: network/netconnect.pm:309
#: network/netconnect.pm:330
#: network/netconnect.pm:887
#: standalone/drakconnect:470
#, c-format
msgid "Account Password"
msgstr "帳號的密碼"

#: network/netconnect.pm:325
#, c-format
msgid "Cable: account options"
msgstr "Cable：帳號選項"

#: network/netconnect.pm:328
#, c-format
msgid "Use BPALogin (needed for Telstra)"
msgstr ""

#: network/netconnect.pm:362
#: network/netconnect.pm:715
#: network/netconnect.pm:920
#, c-format
msgid "Select the network interface to configure:"
msgstr "選取要設定的網路介面："

#: network/netconnect.pm:364
#: network/netconnect.pm:412
#: network/netconnect.pm:716
#: network/netconnect.pm:922
#: network/netconnect.pm:1091
#: network/shorewall.pm:98
#: standalone/drakconnect:684
#: standalone/drakgw:224
#: standalone/drakvpn:221
#, c-format
msgid "Net Device"
msgstr "網路裝置"

#: network/netconnect.pm:365
#: network/netconnect.pm:373
#, c-format
msgid "External ISDN modem"
msgstr "外接式 ISDN 數據機"

#: network/netconnect.pm:411
#: standalone/harddrake2:210
#, c-format
msgid "Select a device!"
msgstr "選取一個裝置！"

#: network/netconnect.pm:420
#: network/netconnect.pm:430
#: network/netconnect.pm:440
#: network/netconnect.pm:473
#: network/netconnect.pm:487
#, c-format
msgid "ISDN Configuration"
msgstr "ISDN 設定"

#: network/netconnect.pm:421
#, c-format
msgid "What kind of card do you have?"
msgstr "您有那種的卡？"

#: network/netconnect.pm:431
#, c-format
msgid ""
"\n"
"If you have an ISA card, the values on the next screen should be right.\n"
"\n"
"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your card.\n"
msgstr ""
"\n"
"如果您使用的是 ISA 卡，下一個螢幕所顯示的數值應該是正確的。\n"
"\n"
"如果您使用的是 PCMCIA 卡，那您必須要知道這張卡的\"irq\" 與 \"io\"值。\n"

#: network/netconnect.pm:435
#, c-format
msgid "Continue"
msgstr "繼續"

#: network/netconnect.pm:435
#, c-format
msgid "Abort"
msgstr "放棄"

#: network/netconnect.pm:441
#, c-format
msgid "Which of the following is your ISDN card?"
msgstr "下列何者是您的 ISDN 卡?"

#: network/netconnect.pm:459
#, c-format
msgid "A CAPI driver is available for this modem. This CAPI driver can offer more capabilities than the free driver (like sending faxes). Which driver do you want to use?"
msgstr ""

#: network/netconnect.pm:461
#: standalone/drakconnect:116
#: standalone/drakups:247
#: standalone/harddrake2:131
#, c-format
msgid "Driver"
msgstr "驅動程式"

#: network/netconnect.pm:473
#, c-format
msgid "Which protocol do you want to use?"
msgstr "您要使用那個通訊協定?"

#: network/netconnect.pm:475
#: standalone/drakconnect:116
#: standalone/drakconnect:309
#: standalone/drakconnect:540
#: standalone/drakvpn:1142
#, c-format
msgid "Protocol"
msgstr "通訊協定"

#: network/netconnect.pm:487
#, c-format
msgid ""
"Select your provider.\n"
"If it is not listed, choose Unlisted."
msgstr ""
"選擇您的提供者.\n"
"如果並沒有包含在清單內, 請選則未列在清單內(Unlisted)."

#: network/netconnect.pm:489
#: network/netconnect.pm:601
#: network/netconnect.pm:757
#, c-format
msgid "Provider:"
msgstr "提供者:"

#: network/netconnect.pm:504
#, c-format
msgid ""
"Your modem is not supported by the system.\n"
"Take a look at http://www.linmodems.org"
msgstr ""
"系統不支援您的數據機。\n"
"請到 http://www.linmodems.org 查詢。"

#: network/netconnect.pm:516
#, c-format
msgid "Select the modem to configure:"
msgstr "選取要設定的數據機:"

#: network/netconnect.pm:568
#, c-format
msgid "Please choose which serial port your modem is connected to."
msgstr "請選取您數據機連接的序列埠."

#: network/netconnect.pm:599
#, c-format
msgid "Select your provider:"
msgstr "選擇您的提供者:"

#: network/netconnect.pm:627
#, c-format
msgid "Dialup: account options"
msgstr "撥號: 帳號選項"

#: network/netconnect.pm:630
#, c-format
msgid "Connection name"
msgstr "連線名稱"

#: network/netconnect.pm:631
#, c-format
msgid "Phone number"
msgstr "電話號碼"

#: network/netconnect.pm:632
#, c-format
msgid "Login ID"
msgstr "登入的 ID"

#: network/netconnect.pm:647
#: network/netconnect.pm:680
#, c-format
msgid "Dialup: IP parameters"
msgstr "撥號: IP 參數"

#: network/netconnect.pm:650
#, c-format
msgid "IP parameters"
msgstr "IP 參數"

#: network/netconnect.pm:651
#: network/netconnect.pm:1018
#: printer/printerdrake.pm:454
#: standalone/drakconnect:116
#: standalone/drakconnect:325
#: standalone/drakconnect:879
#: standalone/drakups:282
#, c-format
msgid "IP address"
msgstr "IP 位址"

#: network/netconnect.pm:652
#, c-format
msgid "Subnet mask"
msgstr "子網路遮罩"

#: network/netconnect.pm:664
#, c-format
msgid "Dialup: DNS parameters"
msgstr "撥號：DNS 參數"

#: network/netconnect.pm:667
#, c-format
msgid "DNS"
msgstr "DNS"

#: network/netconnect.pm:668
#, c-format
msgid "Domain name"
msgstr "網域名稱"

#: network/netconnect.pm:669
#: network/netconnect.pm:884
#: standalone/drakconnect:997
#, c-format
msgid "First DNS Server (optional)"
msgstr "第一台 DNS 伺服器 (選擇性輸入)"

#: network/netconnect.pm:670
#: network/netconnect.pm:885
#: standalone/drakconnect:998
#, c-format
msgid "Second DNS Server (optional)"
msgstr "第二台 DNS 伺服器 (選擇性輸入)"

#: network/netconnect.pm:671
#, c-format
msgid "Set hostname from IP"
msgstr "由 IP 設定主機名稱"

#: network/netconnect.pm:683
#: standalone/drakconnect:336
#, c-format
msgid "Gateway"
msgstr "閘道"

#: network/netconnect.pm:684
#, c-format
msgid "Gateway IP address"
msgstr "閘道 IP 位址"

#: network/netconnect.pm:715
#, c-format
msgid "ADSL configuration"
msgstr "ADSL 設定"

#: network/netconnect.pm:755
#, c-format
msgid "Please choose your ADSL provider"
msgstr "請選擇您的 ADSL 提供者"

#: network/netconnect.pm:773
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"You can provide it now via a floppy or your windows partition,\n"
"or skip and do it later."
msgstr ""
"您需要 Alcatel 的微碼。\n"
"您可以立即由磁碟片或 Windows 磁區安裝，或者先跳過等日後再執行。"

#: network/netconnect.pm:777
#: network/netconnect.pm:782
#, c-format
msgid "Use a floppy"
msgstr "由磁片安裝"

#: network/netconnect.pm:777
#: network/netconnect.pm:786
#, c-format
msgid "Use my Windows partition"
msgstr "由我的 Windows 磁區安裝"

#: network/netconnect.pm:777
#: network/netconnect.pm:789
#, c-format
msgid "Do it later"
msgstr "稍後再執行"

#: network/netconnect.pm:796
#, c-format
msgid "Firmware copy failed, file %s not found"
msgstr "韌體複製失敗，找不到檔案 %s"

#: network/netconnect.pm:803
#, c-format
msgid "Firmware copy succeeded"
msgstr "韌體複製成功"

#: network/netconnect.pm:818
#, c-format
msgid ""
"You need the Alcatel microcode.\n"
"Download it at:\n"
"%s\n"
"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
"您需要 Alcatel 的微碼。\n"
"請到下述網站下載：\n"
"%s\n"
"並複製檔案 mgmt.o 到 /usr/share/speedtouch"

#: network/netconnect.pm:889
#, c-format
msgid "Virtual Path ID (VPI):"
msgstr ""

#: network/netconnect.pm:890
#, c-format
msgid "Virtual Circuit ID (VCI):"
msgstr ""

#: network/netconnect.pm:893
#, c-format
msgid "Encapsulation:"
msgstr "封裝:"

#: network/netconnect.pm:910
#, c-format
msgid ""
"The ECI Hi-Focus modem cannot be supported due to binary driver distribution problem.\n"
"\n"
"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""

#: network/netconnect.pm:922
#, c-format
msgid "Manually load a driver"
msgstr "手動載入驅動程式"

#: network/netconnect.pm:922
#, c-format
msgid "Use a Windows driver (with ndiswrapper)"
msgstr "使用 Windows 驅動程式 (藉由 ndiswrapper)"

#: network/netconnect.pm:940
#, c-format
msgid ""
"WARNING: this device has been previously configured to connect to the Internet.\n"
"Modifying the fields below will override this configuration.\n"
"Do you really want to reconfigure this device?"
msgstr ""
"警告: 這個裝置先前已經被設定為連線到網際網路.\n"
"修改下面欄位將會凌越這個設定.\n"
"您真的想重新設定這個裝置?"

#: network/netconnect.pm:954
#: network/netconnect.pm:1436
#, c-format
msgid ""
"Congratulations, the network and Internet configuration is finished.\n"
"\n"
msgstr ""
"恭喜！網路與網際網路組態已經設定完成了。\n"
"\n"

#: network/netconnect.pm:971
#, c-format
msgid "Zeroconf hostname resolution"
msgstr "Zeroconf 主機名稱解析"

#: network/netconnect.pm:972
#: network/netconnect.pm:1005
#, c-format
msgid "Configuring network device %s (driver %s)"
msgstr "正在設定網路裝置 %s (驅動程式 %s)"

#: network/netconnect.pm:973
#, c-format
msgid "The following protocols can be used to configure an ethernet connection. Please choose the one you want to use"
msgstr "下列的通訊協定可以用來設定區域網路連線。請選擇您要使用的協定"

#: network/netconnect.pm:1006
#, c-format
msgid ""
"Please enter the IP configuration for this machine.\n"
"Each item should be entered as an IP address in dotted-decimal\n"
"notation (for example, 1.2.3.4)."
msgstr ""
"請輸入這台機器的 IP 設定。\n"
"每個項目都應該用小數點間隔的 IP 位址來輸入\n"
"(例如 1.2.3.4)。"

#: network/netconnect.pm:1013
#, c-format
msgid "Assign host name from DHCP address"
msgstr "由 DHCP 位址指派主機名稱"

#: network/netconnect.pm:1014
#, c-format
msgid "DHCP host name"
msgstr "DHCP 主機名稱"

#: network/netconnect.pm:1019
#: standalone/drakconnect:330
#: standalone/drakconnect:880
#: standalone/drakgw:320
#, c-format
msgid "Netmask"
msgstr "網路遮罩"

#: network/netconnect.pm:1021
#: standalone/drakconnect:415
#, c-format
msgid "Track network card id (useful for laptops)"
msgstr "紀錄網路卡的 ID (對於筆記型電腦相當有用)"

#: network/netconnect.pm:1022
#: standalone/drakconnect:416
#, c-format
msgid "Network Hotplugging"
msgstr "網路熱插拔"

#: network/netconnect.pm:1024
#: standalone/drakconnect:410
#, c-format
msgid "Start at boot"
msgstr "於開機時啟動"

#: network/netconnect.pm:1027
#: standalone/drakconnect:883
#, c-format
msgid "DHCP client"
msgstr "DHCP 用戶端"

#: network/netconnect.pm:1041
#: standalone/drakconnect:389
#, c-format
msgid "DHCP timeout (in seconds)"
msgstr "DHCP 連線逾時 (以秒為單位)"

#: network/netconnect.pm:1042
#: standalone/drakconnect:392
#, c-format
msgid "Get DNS servers from DHCP"
msgstr "由 DHCP 取得 DNS 主機"

#: network/netconnect.pm:1043
#, c-format
msgid "Get YP servers from DHCP"
msgstr "由 DHCP 取得 YP 伺服器"

#: network/netconnect.pm:1044
#, c-format
msgid "Get NTPD servers from DHCP"
msgstr "由 DHCP 取得 NTPD 伺服器"

#: network/netconnect.pm:1037
#: printer/printerdrake.pm:1605
#: standalone/drakconnect:649
#, c-format
msgid "IP address should be in format 1.2.3.4"
msgstr "IP 位址應該是 1.2.3.4 這類的格式"

#: network/netconnect.pm:1057
#: standalone/drakconnect:686
#, c-format
msgid "Netmask should be in format 255.255.224.0"
msgstr "網路遮罩應該是 255.255.224.0 這類的格式"

#: network/netconnect.pm:1041
#, c-format
msgid "Warning: IP address %s is usually reserved!"
msgstr "警告：IP 位址 %s 通常是保留下來的！"

#: network/netconnect.pm:1046
#: standalone/drakTermServ:1742
#: standalone/drakTermServ:1743
#: standalone/drakTermServ:1744
#, c-format
msgid "%s already in use\n"
msgstr "%s 已經在使用中了\n"

#: network/netconnect.pm:1067
#, c-format
msgid "Choose an ndiswrapper driver"
msgstr "選擇一個 ndiswrapper 驅動程式"

#: network/netconnect.pm:1068
#: network/netconnect.pm:1075
#, c-format
msgid "Install a new driver"
msgstr "安裝一個新的驅動程式"

#: network/netconnect.pm:1068
#, c-format
msgid "Use already installed driver (%s)"
msgstr "使用已經安裝的驅動程式 (%s)"

#: network/netconnect.pm:1072
#: printer/printerdrake.pm:3644
#, c-format
msgid "Could not install the %s package!"
msgstr "無法安裝 %s 套件！"

#: network/netconnect.pm:1076
#, c-format
msgid "Please select the Windows driver (.inf file)"
msgstr "請選取 Windows 驅動程式 (.inf 檔)"

#: network/netconnect.pm:1126
#: network/netconnect.pm:1155
#, c-format
msgid "Please enter the wireless parameters for this card:"
msgstr "請輸入這張卡的無線網路參數："

#: network/netconnect.pm:1129
#: standalone/drakconnect:382
#, c-format
msgid "Operating Mode"
msgstr "運作模式"

#: network/netconnect.pm:1131
#: standalone/drakconnect:383
#, c-format
msgid "Network name (ESSID)"
msgstr "網路名稱 (ESSID)"

#: network/netconnect.pm:1132
#: standalone/drakconnect:384
#, c-format
msgid "Network ID"
msgstr "網路 ID"

#: network/netconnect.pm:1133
#: standalone/drakconnect:385
#, c-format
msgid "Operating frequency"
msgstr "工作頻率"

#: network/netconnect.pm:1134
#: standalone/drakconnect:386
#, c-format
msgid "Sensitivity threshold"
msgstr ""

#: network/netconnect.pm:1135
#: standalone/drakconnect:387
#, c-format
msgid "Bitrate (in b/s)"
msgstr "連線速率 (b/s)"

#: network/netconnect.pm:1141
#, c-format
msgid "Use Wi-Fi Protected Access (WPA)"
msgstr "使用 Wi-Fi Protected Access (WPA)"

#: network/netconnect.pm:1168
#, c-format
msgid "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz frequency), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1145
#, c-format
msgid "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add enough '0' (zeroes)."
msgstr ""

#: network/netconnect.pm:1158
#: standalone/drakconnect:398
#, c-format
msgid "RTS/CTS"
msgstr ""

#: network/netconnect.pm:1159
#, c-format
msgid ""
"RTS/CTS adds a handshake before each packet transmission to make sure that the\n"
"channel is clear. This adds overhead, but increase performance in case of hidden\n"
"nodes or large number of active nodes. This parameter sets the size of the\n"
"smallest packet for which the node sends RTS, a value equal to the maximum\n"
"packet size disable the scheme. You may also set this parameter to auto, fixed\n"
"or off."
msgstr ""

#: network/netconnect.pm:1166
#: standalone/drakconnect:399
#, c-format
msgid "Fragmentation"
msgstr "破碎片段"

#: network/netconnect.pm:1167
#: standalone/drakconnect:400
#, c-format
msgid "Iwconfig command extra arguments"
msgstr ""

#: network/netconnect.pm:1168
#, c-format
msgid ""
"Here, one can configure some extra wireless parameters such as:\n"
"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set as the hostname).\n"
"\n"
"See iwconfig(8) man page for further information."
msgstr ""

#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
#: network/netconnect.pm:1175
#: standalone/drakconnect:401
#, c-format
msgid "Iwspy command extra arguments"
msgstr ""

#: network/netconnect.pm:1176
#, c-format
msgid ""
"Iwspy is used to set a list of addresses in a wireless network\n"
"interface and to read back quality of link information for each of those.\n"
"\n"
"This information is the same as the one available in /proc/net/wireless :\n"
"quality of the link, signal strength and noise level.\n"
"\n"
"See iwpspy(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1184
#: standalone/drakconnect:402
#, c-format
msgid "Iwpriv command extra arguments"
msgstr ""

#: network/netconnect.pm:1185
#, c-format
msgid ""
"Iwpriv enable to set up optionals (private) parameters of a wireless network\n"
"interface.\n"
"\n"
"Iwpriv deals with parameters and setting specific to each driver (as opposed to\n"
"iwconfig which deals with generic ones).\n"
"\n"
"In theory, the documentation of each device driver should indicate how to use\n"
"those interface specific commands and their effect.\n"
"\n"
"See iwpriv(8) man page for further information."
msgstr ""

#: network/netconnect.pm:1259
#, c-format
msgid ""
"Please enter your host name.\n"
"Your host name should be a fully-qualified host name,\n"
"such as ``mybox.mylab.myco.com''.\n"
"You may also enter the IP address of the gateway if you have one."
msgstr ""
"請輸入您的主機名稱.\n"
"您的主機名稱應該是一個完全合格的主機全名,\n"
"類似 ``mybox.mylab.myco.com'' 的格式.\n"
"使用閘道器的話, 也請在這邊輸入閘道器的 IP 位址."

#: network/netconnect.pm:1263
#, c-format
msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""

#: network/netconnect.pm:1265
#: standalone/drakconnect:996
#, c-format
msgid "Host name (optional)"
msgstr "主機名稱 (選擇性輸入)"

#: network/netconnect.pm:1265
#, c-format
msgid "Host name"
msgstr "主機名稱"

#: network/netconnect.pm:1267
#, c-format
msgid "DNS server 1"
msgstr "DNS 伺服器 1"

#: network/netconnect.pm:1268
#, c-format
msgid "DNS server 2"
msgstr "DNS 伺服器 2"

#: network/netconnect.pm:1269
#, c-format
msgid "DNS server 3"
msgstr "DNS 伺服器 3"

#: network/netconnect.pm:1270
#, c-format
msgid "Search domain"
msgstr "搜尋網域"

#: network/netconnect.pm:1271
#, c-format
msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""

#: network/netconnect.pm:1272
#, c-format
msgid "Gateway (e.g. %s)"
msgstr "閘道器 (比方 %s)"

#: network/netconnect.pm:1274
#, c-format
msgid "Gateway device"
msgstr "閘道器裝置"

#: network/netconnect.pm:1283
#, c-format
msgid "DNS server address should be in format 1.2.3.4"
msgstr "DNS 伺服器位址必須要用 1.2.3.4 的格式來輸入"

#: network/netconnect.pm:1288
#: standalone/drakconnect:652
#, c-format
msgid "Gateway address should be in format 1.2.3.4"
msgstr "Gateway 位址必須要用類似 1.2.3.4 的格式來輸入"

#: network/netconnect.pm:1299
#, c-format
msgid ""
"If desired, enter a Zeroconf hostname.\n"
"This is the name your machine will use to advertise any of\n"
"its shared resources that are not managed by the network.\n"
"It is not necessary on most networks."
msgstr ""

#: network/netconnect.pm:1303
#, c-format
msgid "Zeroconf Host name"
msgstr "Zeroconf 主機名稱"

#: network/netconnect.pm:1306
#, c-format
msgid "Zeroconf host name must not contain a ."
msgstr ""

#: network/netconnect.pm:1316
#, c-format
msgid ""
"You have configured multiple ways to connect to the Internet.\n"
"Choose the one you want to use.\n"
"\n"
msgstr ""
"您已經選擇設定多個能夠連線到 Internet 的方式.\n"
"請您選擇其中一個要使用的項目.\n"
"\n"

#: network/netconnect.pm:1318
#, c-format
msgid "Internet connection"
msgstr "Internet 連線"

#: network/netconnect.pm:1326
#, c-format
msgid "Configuration is complete, do you want to apply settings?"
msgstr "設定完成, 您想要套用設定值?"

#: network/netconnect.pm:1336
#, fuzzy, c-format
msgid "Do you want to allow users to start the connection?"
msgstr "您要在開機時自動啟動該連線嗎?"

#: network/netconnect.pm:1345
#, c-format
msgid "Do you want to start the connection at boot?"
msgstr "您要在開機時自動啟動該連線嗎?"

#: network/netconnect.pm:1354
#, c-format
msgid "Automatically at boot"
msgstr "自動於開機時"

#: network/netconnect.pm:1356
#, c-format
msgid "By using Net Applet in the system tray"
msgstr ""

#: network/netconnect.pm:1358
#, c-format
msgid "Manually (the interface would still be activated at boot)"
msgstr ""

#: network/netconnect.pm:1367
#, c-format
msgid "How do you want to dial this connection?"
msgstr "您想要如何撥接這個連線?"

#: network/netconnect.pm:1380
#, c-format
msgid "The network needs to be restarted. Do you want to restart it?"
msgstr "網路需要被重新啟動. 您想要重新啟動它嗎?"

#: network/netconnect.pm:1387
#: network/netconnect.pm:1452
#, c-format
msgid "Network Configuration"
msgstr "網路設定"

#: network/netconnect.pm:1388
#, c-format
msgid ""
"A problem occurred while restarting the network: \n"
"\n"
"%s"
msgstr ""
"重新啟動網路時發生了一個問題:\n"
"\n"
"%s"

#: network/netconnect.pm:1396
#, c-format
msgid "Do you want to try to connect to the Internet now?"
msgstr "現在您想要試著連線到 Internet 上面嗎?"

#: network/netconnect.pm:1404
#: standalone/drakconnect:1028
#, c-format
msgid "Testing your connection..."
msgstr "正在測試您的連線..."

#: network/netconnect.pm:1420
#, c-format
msgid "The system is now connected to the Internet."
msgstr "系統現在連上 Internet 了."

#: network/netconnect.pm:1421
#, c-format
msgid "For security reasons, it will be disconnected now."
msgstr "因為安全因素考量, 它現在將會被切斷連線."

#: network/netconnect.pm:1422
#, c-format
msgid ""
"The system does not seem to be connected to the Internet.\n"
"Try to reconfigure your connection."
msgstr ""
"系統目前看起來似乎並沒有連上 Internet.\n"
"請嘗試重新設定您的連線."

#: network/netconnect.pm:1439
#, c-format
msgid "After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."
msgstr ""
"在完成這個項目後, 我們建議您重新啟動您的 X 環境\n"
"以避免因為您調整了主機名稱造成 X 的問題."

#: network/netconnect.pm:1440
#, c-format
msgid ""
"Problems occurred during configuration.\n"
"Test your connection via net_monitor or mcc. If your connection does not work, you might want to relaunch the configuration."
msgstr ""
"設定時發生問題.\n"
"以 net_monitor 或 mcc 測試您的連線狀態. 若是您發現您的網路連線並不作用, 您或許需要重新再進行設定."

#: network/netconnect.pm:1453
#, c-format
msgid ""
"Because you are doing a network installation, your network is already configured.\n"
"Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.\n"
msgstr ""
"因為您是透過網路安裝, 所以您的網路組態已經設定過了.\n"
"您可以點選確定 Ok 保留您的設定組態, 或者是選取取消 cancel\n"
"來重新設定網路 & 網際網路連線.\n"

#: network/netconnect.pm:1491
#, c-format
msgid ""
"An unexpected error has happened:\n"
"%s"
msgstr ""
"發生了一個沒有預料到的錯誤：\n"
"%s"

#: network/network.pm:319
#, c-format
msgid "Proxies configuration"
msgstr "代理伺服器設定"

#: network/network.pm:320
#, c-format
msgid "HTTP proxy"
msgstr "HTTP 代理伺服器"

#: network/network.pm:321
#, c-format
msgid "FTP proxy"
msgstr "FTP 代理伺服器"

#: network/network.pm:324
#, c-format
msgid "Proxy should be http://..."
msgstr "代理伺服器的設定格式必須為 http://..."

#: network/network.pm:325
#, c-format
msgid "URL should begin with 'ftp:' or 'http:'"
msgstr "URL 應該是以 'ftp:' 或 'http:' 開頭"

#: network/shorewall.pm:25
#, c-format
msgid "Firewalling configuration detected!"
msgstr "防火牆設定已經偵測到了!"

#: network/shorewall.pm:26
#, c-format
msgid "Warning! An existing firewalling configuration has been detected. You may need some manual fixes after installation."
msgstr ""
"警告! 偵測到現有已經存在的防火牆組態設定.\n"
"您應該在安裝之後手動修正某些設定."

#: network/shorewall.pm:91
#: standalone/drakgw:217
#: standalone/drakvpn:214
#, c-format
msgid ""
"Please enter the name of the interface connected to the internet.\n"
"\n"
"Examples:\n"
"\t\tppp+ for modem or DSL connections, \n"
"\t\teth0, or eth1 for cable connection, \n"
"\t\tippp+ for a isdn connection.\n"
msgstr ""

#: network/tools.pm:181
#, c-format
msgid "Insert floppy"
msgstr "插入軟片"

#: network/tools.pm:182
#, c-format
msgid "Insert a FAT formatted floppy in drive %s with %s in root directory and press %s"
msgstr "插入一張 FAT 格式化的軟片於磁碟 %s 跟著 %s 於 root 目錄下然後按下 %s"

#: network/tools.pm:187
#, c-format
msgid "Floppy access error, unable to mount device %s"
msgstr "軟片存取錯誤, 無法掛載裝置 %s"

#: partition_table.pm:397
#, c-format
msgid "mount failed: "
msgstr "掛載失敗:"

#: partition_table.pm:502
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "這個平台並不支援延伸分割區"

#: partition_table.pm:520
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
"The only solution is to move your primary partitions to have the hole next to the extended partitions."
msgstr ""
"您的硬碟分割表中有一個空洞, 我無法使用\n"
"唯一的解決方法是將您的主分割區的位置搬移, 讓這些空洞與延伸分割區相鄰."

#: partition_table.pm:611
#, c-format
msgid "Restoring from file %s failed: %s"
msgstr "試圖從檔案 %s 恢復時發生錯誤: %s"

#: partition_table.pm:613
#, c-format
msgid "Bad backup file"
msgstr "壞掉的備份檔案"

#: partition_table.pm:633
#, c-format
msgid "Error writing to file %s"
msgstr "寫入檔案 %s 時發生錯誤"

#: partition_table/raw.pm:240
#, c-format
msgid ""
"Something bad is happening on your drive. \n"
"A test to check the integrity of data has failed. \n"
"It means writing anything on the disk will end up with random, corrupted data."
msgstr ""
"您的磁碟發生了一個嚴重的錯誤.\n"
"資料完整性檢測已經失敗了.\n"
"它意旨寫入任何東西到磁碟將會導致胡亂, 腐敗的資料."

#: pkgs.pm:23
#, c-format
msgid "must have"
msgstr "必備的"

#: pkgs.pm:24
#, c-format
msgid "important"
msgstr "重要的"

#: pkgs.pm:25
#, c-format
msgid "very nice"
msgstr "極好的"

#: pkgs.pm:26
#, c-format
msgid "nice"
msgstr "好的"

#: pkgs.pm:27
#, c-format
msgid "maybe"
msgstr "或許"

#: pkgs.pm:474
#, c-format
msgid "Downloading file %s..."
msgstr "正在下載檔案 %s..."

#: printer/cups.pm:103
#, c-format
msgid "(on %s)"
msgstr "(於 %s)"

#: printer/cups.pm:103
#, c-format
msgid "(on this machine)"
msgstr "(位於這個機器上)"

#: printer/cups.pm:115
#: standalone/printerdrake:187
#, c-format
msgid "Configured on other machines"
msgstr "於其他機器上被設定"

#: printer/cups.pm:117
#, c-format
msgid "On CUPS server \"%s\""
msgstr "位於 CUPS 伺服器 \"%s\""

#: printer/cups.pm:117
#: printer/printerdrake.pm:4650
#: printer/printerdrake.pm:4660
#: printer/printerdrake.pm:4805
#: printer/printerdrake.pm:4816
#: printer/printerdrake.pm:5011
#, c-format
msgid " (Default)"
msgstr " (預設開機)"

#: printer/data.pm:56
#, c-format
msgid "PDQ - Print, Do not Queue"
msgstr "PDQ - Print, Do not Queue"

#: printer/data.pm:57
#, c-format
msgid "PDQ"
msgstr "PDQ"

#: printer/data.pm:69
#, c-format
msgid "LPD - Line Printer Daemon"
msgstr "LPD - Line Printer Daemon"

#: printer/data.pm:70
#, c-format
msgid "LPD"
msgstr "LPD"

#: printer/data.pm:91
#, c-format
msgid "LPRng - LPR New Generation"
msgstr "LPRng - LPR New Generation"

#: printer/data.pm:92
#, c-format
msgid "LPRng"
msgstr "LPRng"

#: printer/data.pm:117
#, c-format
msgid "CUPS - Common Unix Printing System"
msgstr "CUPS - 通用 Unix 列印系統"

#: printer/data.pm:147
#, c-format
msgid "CUPS - Common Unix Printing System (remote server)"
msgstr "CUPS - 通用 Unix 列印系統 (遠端伺服器)"

#: printer/data.pm:148
#, c-format
msgid "Remote CUPS"
msgstr "遠端 CUPS"

#: printer/detect.pm:153
#: printer/detect.pm:236
#: printer/detect.pm:438
#: printer/detect.pm:475
#, c-format
msgid "Unknown Model"
msgstr "未知的型號"

#: printer/main.pm:27
#, c-format
msgid "Local printer"
msgstr "本地印表機"

#: printer/main.pm:28
#, c-format
msgid "Remote printer"
msgstr "遠端印表機"

#: printer/main.pm:29
#, c-format
msgid "Printer on remote CUPS server"
msgstr "遠端的 CUPS 伺服器印表機"

#: printer/main.pm:30
#: printer/printerdrake.pm:1628
#, c-format
msgid "Printer on remote lpd server"
msgstr "遠端的 lpd 伺服器印表機"

#: printer/main.pm:31
#, c-format
msgid "Network printer (TCP/Socket)"
msgstr "網路印表機 (TCP/Socket)"

#: printer/main.pm:32
#, c-format
msgid "Printer on SMB/Windows 95/98/NT server"
msgstr "SMB/Windows 95/98/NT 伺服器印表機"

#: printer/main.pm:33
#, c-format
msgid "Printer on NetWare server"
msgstr "Netware 伺服器印表機"

#: printer/main.pm:34
#: printer/printerdrake.pm:1632
#, c-format
msgid "Enter a printer device URI"
msgstr "輸入印表機裝置的 URI"

#: printer/main.pm:35
#, c-format
msgid "Pipe job into a command"
msgstr "使用 Pipe 管線工作到一個指令"

#. Translation of the "(recommended)" in printer driver entries
#: printer/main.pm:45
#, c-format
msgid "recommended"
msgstr "建議使用"

#: printer/main.pm:324
#: printer/main.pm:629
#: printer/main.pm:1664
#: printer/main.pm:2699
#: printer/main.pm:2708
#: printer/printerdrake.pm:903
#: printer/printerdrake.pm:2094
#: printer/printerdrake.pm:5048
#, c-format
msgid "Unknown model"
msgstr "未知的型號"

#: printer/main.pm:349
#: standalone/printerdrake:186
#, c-format
msgid "Configured on this machine"
msgstr "於本機上被設定"

#: printer/main.pm:355
#: printer/printerdrake.pm:1175
#, c-format
msgid " on parallel port #%s"
msgstr "於並列埠上 #%s"

#: printer/main.pm:358
#: printer/printerdrake.pm:1178
#, c-format
msgid ", USB printer #%s"
msgstr "，USB 印表機  #%s"

#: printer/main.pm:360
#, c-format
msgid ", USB printer"
msgstr "，USB 印表機"

#: printer/main.pm:364
#, c-format
msgid ", HP printer on a parallel port"
msgstr "，位於並列埠的 HP 印表機"

#: printer/main.pm:366
#, c-format
msgid ", HP printer on USB"
msgstr "，位於 USB 埠的 HP 印表機"

#: printer/main.pm:368
#, c-format
msgid ", HP printer on HP JetDirect"
msgstr "，位於 HP JetDirect 的 HP 印表機"

#: printer/main.pm:370
#, c-format
msgid ", HP printer"
msgstr "，HP 印表機"

#: printer/main.pm:376
#, c-format
msgid ", multi-function device on parallel port #%s"
msgstr "，位於並列埠 %s 的多功能裝置"

#: printer/main.pm:379
#, c-format
msgid ", multi-function device on a parallel port"
msgstr "，位於並列埠的多功能裝置"

#: printer/main.pm:381
#, c-format
msgid ", multi-function device on USB"
msgstr "，位於 USB 的多功能裝置"

#: printer/main.pm:383
#, c-format
msgid ", multi-function device on HP JetDirect"
msgstr "，為於 HP JetDirect 的多功能裝置"

#: printer/main.pm:385
#, c-format
msgid ", multi-function device"
msgstr "，多功能裝置"

#: printer/main.pm:389
#, c-format
msgid ", printing to %s"
msgstr "，列印至 %s"

#: printer/main.pm:392
#, c-format
msgid " on LPD server \"%s\", printer \"%s\""
msgstr " 位於 LPD 伺服器 \"%s\"，印表機 \"%s\""

#: printer/main.pm:395
#, c-format
msgid ", TCP/IP host \"%s\", port %s"
msgstr "，TCP/IP 主機 \"%s\"，連接埠 %s"

#: printer/main.pm:400
#, c-format
msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr "位於 Windows 伺服器\"%s\"，分享名稱 \"%s\""

#: printer/main.pm:405
#, c-format
msgid " on Novell server \"%s\", printer \"%s\""
msgstr "位於 Novell 伺服器 \"%s\"，印表機 \"%s\""

#: printer/main.pm:408
#, c-format
msgid ", using command %s"
msgstr "，使用指令 %s"

#: printer/main.pm:423
#, c-format
msgid "Parallel port #%s"
msgstr "於並列埠 #%s"

#: printer/main.pm:426
#: printer/printerdrake.pm:1196
#: printer/printerdrake.pm:1223
#: printer/printerdrake.pm:1241
#, c-format
msgid "USB printer #%s"
msgstr "USB 印表機 #%s"

#: printer/main.pm:428
#, c-format
msgid "USB printer"
msgstr "USB 印表機"

#: printer/main.pm:432
#, c-format
msgid "HP printer on a parallel port"
msgstr "位於並列埠的 HP 印表機"

#: printer/main.pm:434
#, c-format
msgid "HP printer on USB"
msgstr "位於 USB 埠的 HP 印表機"

#: printer/main.pm:436
#, c-format
msgid "HP printer on HP JetDirect"
msgstr "位於 HP JetDirect 的 HP 印表機"

#: printer/main.pm:438
#, c-format
msgid "HP printer"
msgstr "HP 印表機"

#: printer/main.pm:444
#, c-format
msgid "Multi-function device on parallel port #%s"
msgstr "多功能裝置位於並列埠 #%s"

#: printer/main.pm:447
#, c-format
msgid "Multi-function device on a parallel port"
msgstr "多功能裝置位於一個並列埠"

#: printer/main.pm:449
#, c-format
msgid "Multi-function device on USB"
msgstr "多功能裝置位於 USB"

#: printer/main.pm:451
#, c-format
msgid "Multi-function device on HP JetDirect"
msgstr "多功能裝置位於 HP JetDirect"

#: printer/main.pm:453
#, c-format
msgid "Multi-function device"
msgstr "多功能裝置"

#: printer/main.pm:457
#, c-format
msgid "Prints into %s"
msgstr "列印至 %s"

#: printer/main.pm:460
#, c-format
msgid "LPD server \"%s\", printer \"%s\""
msgstr "LPD 伺服器 \"%s\"，印表機 \"%s\""

#: printer/main.pm:463
#, c-format
msgid "TCP/IP host \"%s\", port %s"
msgstr "TCP/IP 主機 \"%s\"，連接埠 %s"

#: printer/main.pm:468
#, c-format
msgid "SMB/Windows server \"%s\", share \"%s\""
msgstr "位於 Windows 伺服器 \"%s\"，分享名稱 \"%s\""

#: printer/main.pm:473
#, c-format
msgid "Novell server \"%s\", printer \"%s\""
msgstr "位於 Novell 伺服器 \"%s\"，印表機 \"%s\""

#: printer/main.pm:476
#, c-format
msgid "Uses command %s"
msgstr "使用指令 %s"

#: printer/main.pm:478
#, c-format
msgid "URI: %s"
msgstr "URI：%s"

#: printer/main.pm:626
#: printer/printerdrake.pm:849
#: printer/printerdrake.pm:2861
#, c-format
msgid "Raw printer (No driver)"
msgstr "Raw 印表機 (沒有驅動程式)"

#: printer/main.pm:1176
#: printer/printerdrake.pm:205
#: printer/printerdrake.pm:217
#, c-format
msgid "Local network(s)"
msgstr "本地端網路"

#: printer/main.pm:1178
#: printer/printerdrake.pm:221
#, c-format
msgid "Interface \"%s\""
msgstr "介面 \"%s\""

#: printer/main.pm:1180
#, c-format
msgid "Network %s"
msgstr "網路 %s"

#: printer/main.pm:1182
#, c-format
msgid "Host %s"
msgstr "主機 %s"

#: printer/main.pm:1211
#, c-format
msgid "%s (Port %s)"
msgstr "%s (連接埠 %s)"

#: printer/printerdrake.pm:19
#, c-format
msgid "The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by decompressing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on.\n"
msgstr "HP LaserJet 1000 啟動電源後需要下載它的韌體檔。請由 HP 的網站下載給 Windows 使用的驅動程式 (印表機光碟中的韌體檔無法工作) 並使用 'unzip' 工具解開 '.exe' 的自動解壓檔，然後尋找一個名為 'sihp1000.img' 的韌體檔。複製這個檔案到 '/etc/printer' 目錄下。這裡它將會被自動上傳 script 找到，並在印表機連接上電腦並啟動電源後自動上傳。\n"

#: printer/printerdrake.pm:61
#, c-format
msgid "CUPS printer configuration"
msgstr "CUPS 印表機設定"

#: printer/printerdrake.pm:62
#, c-format
msgid "Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines."
msgstr ""

#: printer/printerdrake.pm:63
#, c-format
msgid "You can also decide here whether printers on remote machines should be automatically made available on this machine."
msgstr ""

#: printer/printerdrake.pm:66
#, c-format
msgid "The printers on this machine are available to other computers"
msgstr "本機的列表機可以被其他的電腦使用"

#: printer/printerdrake.pm:71
#, c-format
msgid "Automatically find available printers on remote machines"
msgstr "自動尋找遠端機器上可以使用的印表機"

#: printer/printerdrake.pm:76
#, c-format
msgid "Printer sharing on hosts/networks: "
msgstr "印表機分享於主機/網路："

#: printer/printerdrake.pm:78
#, c-format
msgid "Custom configuration"
msgstr "客製化設定"

#: printer/printerdrake.pm:83
#: standalone/scannerdrake:593
#: standalone/scannerdrake:610
#, c-format
msgid "No remote machines"
msgstr "沒有遠端機器"

#: printer/printerdrake.pm:94
#, c-format
msgid "Additional CUPS servers: "
msgstr "附加的 CUPS 伺服器:"

#: printer/printerdrake.pm:101
#, c-format
msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
msgstr ""

#: printer/printerdrake.pm:109
#, c-format
msgid "Japanese text printing mode"
msgstr "日本字列印模式"

#: printer/printerdrake.pm:110
#, c-format
msgid "Turning on this allows to print plain text files in Japanese language. Only use this function if you really want to print text in Japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print Japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."
msgstr ""

#: printer/printerdrake.pm:117
#, c-format
msgid "Automatic correction of CUPS configuration"
msgstr "自動化更正 CPUS 設定"

#: printer/printerdrake.pm:119
#, c-format
msgid ""
"When this option is turned on, on every startup of CUPS it is automatically made sure that\n"
"\n"
"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
"\n"
"- if /etc/cups/cupsd.conf is missing, it will be created\n"
"\n"
"- when printer information is broadcasted, it does not contain \"localhost\" as the server name.\n"
"\n"
"If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."
msgstr ""

#: printer/printerdrake.pm:132
#: printer/printerdrake.pm:500
#: printer/printerdrake.pm:4292
#, c-format
msgid "Remote CUPS server and no local CUPS daemon"
msgstr ""

#: printer/printerdrake.pm:135
#, c-format
msgid "On"
msgstr "開"

#: printer/printerdrake.pm:137
#: printer/printerdrake.pm:492
#: printer/printerdrake.pm:519
#, c-format
msgid "Off"
msgstr "關"

#: printer/printerdrake.pm:138
#: printer/printerdrake.pm:501
#, c-format
msgid "In this mode the local CUPS daemon will be stopped and all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:155
#: printer/printerdrake.pm:230
#, c-format
msgid "Sharing of local printers"
msgstr "本地端印表機分享"

#: printer/printerdrake.pm:156
#, c-format
msgid "These are the machines and networks on which the locally connected printer(s) should be available:"
msgstr ""

#: printer/printerdrake.pm:167
#, c-format
msgid "Add host/network"
msgstr "新增主機/網路"

#: printer/printerdrake.pm:173
#, c-format
msgid "Edit selected host/network"
msgstr "編輯選取的主機/網路"

#: printer/printerdrake.pm:182
#, c-format
msgid "Remove selected host/network"
msgstr "移除選取的主機/網路"

#: printer/printerdrake.pm:213
#: printer/printerdrake.pm:223
#: printer/printerdrake.pm:235
#: printer/printerdrake.pm:242
#: printer/printerdrake.pm:273
#: printer/printerdrake.pm:291
#, c-format
msgid "IP address of host/network:"
msgstr "主機/網路的IP 位址"

#: printer/printerdrake.pm:231
#, c-format
msgid "Choose the network or host on which the local printers should be made available:"
msgstr ""

#: printer/printerdrake.pm:238
#, c-format
msgid "Host/network IP address missing."
msgstr "主機/網路 IP 位址遺失。"

#: printer/printerdrake.pm:246
#, c-format
msgid "The entered host/network IP is not correct.\n"
msgstr "輸入的主機/網路 IP 是錯誤的。\n"

#: printer/printerdrake.pm:247
#: printer/printerdrake.pm:423
#, c-format
msgid "Examples for correct IPs:\n"
msgstr "正確的 IP 位址範例：\n"

#: printer/printerdrake.pm:271
#, c-format
msgid "This host/network is already in the list, it cannot be added again.\n"
msgstr "這個主機/網路已經存在於列表中，無法重複新增\n"

#: printer/printerdrake.pm:340
#: printer/printerdrake.pm:410
#, c-format
msgid "Accessing printers on remote CUPS servers"
msgstr "存取遠端的 CUPS 伺服器印表機"

#: printer/printerdrake.pm:341
#, c-format
msgid "Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."
msgstr "在這裡新增您想要使用的 CUPS 伺服器。您只有在伺服器沒有向區域網路廣播它所擁有的印表機資訊時才需要作這件事。"

#: printer/printerdrake.pm:352
#, c-format
msgid "Add server"
msgstr "新增伺服器"

#: printer/printerdrake.pm:358
#, c-format
msgid "Edit selected server"
msgstr "編輯選取的伺服器"

#: printer/printerdrake.pm:367
#, c-format
msgid "Remove selected server"
msgstr "移除選取的伺服器"

#: printer/printerdrake.pm:411
#, c-format
msgid "Enter IP address and port of the host whose printers you want to use."
msgstr "輸入您想要使用的印表機主機的 IP 位址及通訊埠。"

#: printer/printerdrake.pm:412
#, c-format
msgid "If no port is given, 631 will be taken as default."
msgstr "假如沒有指定通訊埠，將使用預設值 631"

#: printer/printerdrake.pm:416
#, c-format
msgid "Server IP missing!"
msgstr "伺服器 IP 遺失！"

#: printer/printerdrake.pm:422
#, c-format
msgid "The entered IP is not correct.\n"
msgstr "輸入的 IP 位址不正確。\n"

#: printer/printerdrake.pm:434
#: printer/printerdrake.pm:1852
#, c-format
msgid "The port number should be an integer!"
msgstr "通訊埠號應該是一個整數！"

#: printer/printerdrake.pm:445
#, c-format
msgid "This server is already in the list, it cannot be added again.\n"
msgstr "這個伺服器已經存在於列表中，無法重複新增\n"

#: printer/printerdrake.pm:456
#: printer/printerdrake.pm:1873
#: standalone/drakups:247
#: standalone/harddrake2:50
#, c-format
msgid "Port"
msgstr "通訊埠"

#: printer/printerdrake.pm:489
#: printer/printerdrake.pm:505
#: printer/printerdrake.pm:520
#: printer/printerdrake.pm:524
#: printer/printerdrake.pm:530
#, c-format
msgid "On, Name or IP of remote server:"
msgstr "開，遠端伺服器的名稱或 IP 位址："

#: printer/printerdrake.pm:508
#: printer/printerdrake.pm:4301
#: printer/printerdrake.pm:4366
#, c-format
msgid "CUPS server name or IP address missing."
msgstr "CUPS 伺服器的名稱或 IP 位址遺失。"

#: printer/printerdrake.pm:560
#: printer/printerdrake.pm:580
#: printer/printerdrake.pm:673
#: printer/printerdrake.pm:739
#: printer/printerdrake.pm:766
#: printer/printerdrake.pm:825
#: printer/printerdrake.pm:867
#: printer/printerdrake.pm:877
#: printer/printerdrake.pm:1926
#: printer/printerdrake.pm:2137
#: printer/printerdrake.pm:2169
#: printer/printerdrake.pm:2217
#: printer/printerdrake.pm:2269
#: printer/printerdrake.pm:2286
#: printer/printerdrake.pm:2330
#: printer/printerdrake.pm:2370
#: printer/printerdrake.pm:2420
#: printer/printerdrake.pm:2454
#: printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2714
#: printer/printerdrake.pm:2719
#: printer/printerdrake.pm:2856
#: printer/printerdrake.pm:2966
#: printer/printerdrake.pm:3560
#: printer/printerdrake.pm:3625
#: printer/printerdrake.pm:3674
#: printer/printerdrake.pm:3677
#: printer/printerdrake.pm:3808
#: printer/printerdrake.pm:3908
#: printer/printerdrake.pm:3980
#: printer/printerdrake.pm:4001
#: printer/printerdrake.pm:4010
#: printer/printerdrake.pm:4104
#: printer/printerdrake.pm:4196
#: printer/printerdrake.pm:4202
#: printer/printerdrake.pm:4222
#: printer/printerdrake.pm:4328
#: printer/printerdrake.pm:4435
#: printer/printerdrake.pm:4454
#: printer/printerdrake.pm:4463
#: printer/printerdrake.pm:4477
#: printer/printerdrake.pm:4673
#: printer/printerdrake.pm:5109
#: printer/printerdrake.pm:5186
#: standalone/printerdrake:67
#: standalone/printerdrake:554
#, c-format
msgid "Printerdrake"
msgstr "PrinterDrake"

#: printer/printerdrake.pm:561
#: printer/printerdrake.pm:3909
#: printer/printerdrake.pm:4436
#, c-format
msgid "Reading printer data..."
msgstr "正在讀取印表機資料..."

#: printer/printerdrake.pm:581
#, c-format
msgid "Restarting CUPS..."
msgstr "正在重新啟動 CUPS..."

#: printer/printerdrake.pm:608
#: printer/printerdrake.pm:628
#, c-format
msgid "Select Printer Connection"
msgstr "選擇印表機連線"

#: printer/printerdrake.pm:609
#, c-format
msgid "How is the printer connected?"
msgstr "印表機是如何連線的?"

#: printer/printerdrake.pm:611
#, c-format
msgid ""
"\n"
"Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected."
msgstr ""
"\n"
"位於遠端 CUPS 伺服器的印表機上並不需要在這裡設定；\n"
"這些印表機將自動偵測到。"

#: printer/printerdrake.pm:614
#: printer/printerdrake.pm:4675
#, c-format
msgid ""
"\n"
"WARNING: No local network connection active, remote printers can neither be detected nor tested!"
msgstr ""
"\n"
"警告：本地端網路連線並未啟動，無法偵測遠端印表機也無法測試！"

#: printer/printerdrake.pm:621
#, c-format
msgid "Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"
msgstr "印表機自動偵測 (本地端，TCP/Socket，SMB 印表機，與裝置 URI )"

#: printer/printerdrake.pm:623
#, c-format
msgid "Modify timeout for network printer auto-detection"
msgstr "修改網路印表機自動偵測的連線逾時時間"

#: printer/printerdrake.pm:629
#, c-format
msgid "Enter the timeout for network printer auto-detection (in msec) here. "
msgstr "請在此輸入網路印表機自動偵測的連線逾時時間 (以秒為單位)。"

#: printer/printerdrake.pm:631
#, c-format
msgid "The longer you choose the timeout, the more reliable the detections of network printers will be, but the scan can take longer then, especially if there are many machines with local firewalls in the network. "
msgstr ""

#: printer/printerdrake.pm:635
#, c-format
msgid "The timeout must be a positive integer number!"
msgstr "連線逾時時間必須為整數！"

#: printer/printerdrake.pm:673
#, c-format
msgid "Checking your system..."
msgstr "正在檢查您的系統..."

#: printer/printerdrake.pm:690
#, c-format
msgid "and one unknown printer"
msgstr "與一台未知的印表機機"

#: printer/printerdrake.pm:692
#, c-format
msgid "and %d unknown printers"
msgstr "與 %d 台未知的印表機"

#: printer/printerdrake.pm:696
#, c-format
msgid ""
"The following printers\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"下列印表機\n"
"\n"
"%s%s直接連結到您的系統"

#: printer/printerdrake.pm:698
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"are directly connected to your system"
msgstr ""
"下列印表機\n"
"\n"
"%s%s直接連結到您的系統"

#: printer/printerdrake.pm:699
#, c-format
msgid ""
"The following printer\n"
"\n"
"%s%s\n"
"is directly connected to your system"
msgstr ""
"下列印表機\n"
"\n"
"%s%s直接連結到您的系統"

#: printer/printerdrake.pm:703
#, c-format
msgid ""
"\n"
"There is one unknown printer directly connected to your system"
msgstr ""
"\n"
"目前有一台未知類型的印表機直接連結在您的系統上"

#: printer/printerdrake.pm:704
#, c-format
msgid ""
"\n"
"There are %d unknown printers directly connected to your system"
msgstr ""
"\n"
"目前有 %d 未知類型的印表機直接連結在您的系統上"

#: printer/printerdrake.pm:707
#, c-format
msgid "There are no printers found which are directly connected to your machine"
msgstr "目前沒有找到直接連結在您電腦上的印表機"

#: printer/printerdrake.pm:710
#, c-format
msgid " (Make sure that all your printers are connected and turned on).\n"
msgstr " (請確認您全部的印表機連結並且打開電源了)。\n"

#: printer/printerdrake.pm:723
#, c-format
msgid "Do you want to enable printing on the printers mentioned above or on printers in the local network?\n"
msgstr "您要啟用上面提及的印表機列印服務，或者是本地端網路的列印服務？\n"

#: printer/printerdrake.pm:724
#, c-format
msgid "Do you want to enable printing on printers in the local network?\n"
msgstr "您要啟用本地端網路的列印服務？\n"

#: printer/printerdrake.pm:726
#, c-format
msgid "Do you want to enable printing on the printers mentioned above?\n"
msgstr "您要啟用上面提及的印表機列印服務？\n"

#: printer/printerdrake.pm:727
#, c-format
msgid "Are you sure that you want to set up printing on this machine?\n"
msgstr "您確定要設定這台電腦上的列印服務嗎？\n"

#: printer/printerdrake.pm:728
#, c-format
msgid "NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed."
msgstr "注意：根據印表機型號與列印系統，將要安裝總共 %d MB 的附加軟體。"

#: printer/printerdrake.pm:767
#, c-format
msgid "Searching for new printers..."
msgstr "正在尋找新的印表機..."

#: printer/printerdrake.pm:826
#, c-format
msgid "Found printer on %s..."
msgstr "在 %s 上找到印表機..."

#: printer/printerdrake.pm:851
#, c-format
msgid "("
msgstr "("

#: printer/printerdrake.pm:852
#, c-format
msgid " on "
msgstr "在"

#: printer/printerdrake.pm:853
#: standalone/scannerdrake:137
#, c-format
msgid ")"
msgstr ")"

#: printer/printerdrake.pm:858
#: printer/printerdrake.pm:2868
#, c-format
msgid "Printer model selection"
msgstr "選擇印表機的型號"

#: printer/printerdrake.pm:859
#: printer/printerdrake.pm:2869
#, c-format
msgid "Which printer model do you have?"
msgstr "您的印表機屬於那種型號？"

#: printer/printerdrake.pm:860
#, c-format
msgid ""
"\n"
"\n"
"Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list."
msgstr ""
"\n"
"\n"
"Printerdrake 無法確定您的印表機 %s 的型號。請由列表中選取正確的型號。"

#: printer/printerdrake.pm:863
#: printer/printerdrake.pm:2874
#, c-format
msgid "If your printer is not listed, choose a compatible (see printer manual) or a similar one."
msgstr "如果您的印表機並未列出，請選取一個相容 (見印表機說明書) 或者是相似的。"

#: printer/printerdrake.pm:868
#, c-format
msgid "Configuring printer on %s..."
msgstr "正在設定印表機於 %s..."

#: printer/printerdrake.pm:878
#: printer/printerdrake.pm:4455
#, c-format
msgid "Configuring printer \"%s\"..."
msgstr "正在設定印表機 \"%s\" 中..."

#: printer/printerdrake.pm:1036
#: printer/printerdrake.pm:1048
#: printer/printerdrake.pm:1107
#: printer/printerdrake.pm:2103
#: printer/printerdrake.pm:2118
#: printer/printerdrake.pm:2188
#: printer/printerdrake.pm:4692
#: printer/printerdrake.pm:4861
#, c-format
msgid "Add a new printer"
msgstr "新增一個印表機"

#: printer/printerdrake.pm:1037
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network.\n"
"\n"
"It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types."
msgstr ""
"\n"
"歡迎來到印表機設定精靈\n"
"\n"
"這個精靈允許您安裝本地端或遠端印表機以便被這台電腦及網路中的其他電腦使用。\n"
"\n"
"它將詢問您設定印表機所需的所有必要資訊並提供您所有可用的印表機驅動程式、驅動程式選項、與印表機連線型態。"

#: printer/printerdrake.pm:1050
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
"\n"
"歡迎來到印表機設定精靈\n"
"\n"
"這個精靈將會幫助您安裝您的印表機 - 不論它是直接連結到這台電腦的印表機、網路印表機或是一個經由 Windows 所分享的印表機。\n"
"\n"
"請插入並開啟所有連接到這台電腦上的印表機來進行自動偵測。此外您的網路印表機與您的 Windows 電腦必須要連線並且開啟電源。\n"
"\n"
"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功能。\n"
"\n"
"當您準備好時，請點選「下一步」，或者如果您現在不想設定印表機，請點選「取消」。"

#: printer/printerdrake.pm:1059
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this computer.\n"
"\n"
"Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
"\n"
"歡迎來到印表機設定精靈\n"
"\n"
"接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n"
"若是您要設定的印表機是直接安裝在你機器上，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。\n"
"\n"
"當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。"

#: printer/printerdrake.pm:1067
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this computer or connected directly to the network.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on.\n"
"\n"
"Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you do not need it.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
"\n"
"歡迎來到印表機設定精靈\n"
"\n"
"接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機以及遠端網路印表機。\n"
"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。若是您要使用的是網路印表機，請確定該印表機的電源也是處於開啟狀態並且已經正確的連線。\n"
"\n"
"請注意，自動偵測網路上的印表機比只偵測直接連結到這台電腦的印表機需要更長的時間。若您不需要的話，請關閉自動偵測網路印表機或 Windows 分享的印表機這項功能。\n"
"\n"
"當您確認沒問題時，請點選「下一步」，或者點選「取消」放棄設定。"

#: printer/printerdrake.pm:1076
#, c-format
msgid ""
"\n"
"Welcome to the Printer Setup Wizard\n"
"\n"
"This wizard will help you to install your printer(s) connected to this computer.\n"
"\n"
"If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected.\n"
"\n"
" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."
msgstr ""
"\n"
"歡迎來到印表機設定精靈\n"
"\n"
"接下來設定精靈將會引導您完成印表機的設定，包含位於本機的印表機。\n"
"若是您要設定的印表機是直接安裝在您機器上的，請先確認您的線路有安插正確，並且電源已經開啟，以便於自動偵測您的印表機型號。\n"
"\n"
"當您確認沒問題時，點選「下一步」，或者點選「取消」放棄設定。"

#: printer/printerdrake.pm:1085
#, c-format
msgid "Auto-detect printers connected to this machine"
msgstr "自動偵測本機印表機"

#: printer/printerdrake.pm:1088
#, c-format
msgid "Auto-detect printers connected directly to the local network"
msgstr "自動偵測區域網路印表機"

#: printer/printerdrake.pm:1091
#, c-format
msgid "Auto-detect printers connected to machines running Microsoft Windows"
msgstr "自動偵測位於 Microsoft Windows 電腦的印表機"

#: printer/printerdrake.pm:1108
#, fuzzy, c-format
msgid "No auto-detection"
msgstr "自動偵測"

#: printer/printerdrake.pm:1173
#, c-format
msgid ""
"\n"
"Congratulations, your printer is now installed and configured!\n"
"\n"
"You can print using the \"Print\" command of your application (usually in the \"File\" menu).\n"
"\n"
"If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
"\n"
"恭喜，您的印表機已經安裝並設定完成！\n"
"\n"
"您可以在您的應用程式中使用 \"列印\" 這個指令 (通常位於 \"檔案\" 這個選單下)。若是您事後需要新增、刪除、重新命名，或者修改預設選項 (例如紙張輸入方向、輸出品質...等)，請在 %s 控制中心中的 \"硬體\" 選擇 \"印表機\" 來設定。"

#: printer/printerdrake.pm:1143
#: printer/printerdrake.pm:1373
#: printer/printerdrake.pm:1435
#: printer/printerdrake.pm:1525
#: printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1738
#: printer/printerdrake.pm:1890
#: printer/printerdrake.pm:1976
#: printer/printerdrake.pm:1985
#: printer/printerdrake.pm:1994
#: printer/printerdrake.pm:2005
#: printer/printerdrake.pm:2143
#: printer/printerdrake.pm:2229
#: printer/printerdrake.pm:2275
#: printer/printerdrake.pm:2342
#: printer/printerdrake.pm:2377
#, c-format
msgid "Could not install the %s packages!"
msgstr "無法安裝 %s 套件！"

#: printer/printerdrake.pm:1145
#, c-format
msgid "Skipping Windows/SMB server auto-detection"
msgstr "略過 Windows/SMB 伺服器自動偵測"

#: printer/printerdrake.pm:1151
#: printer/printerdrake.pm:1296
#: printer/printerdrake.pm:1531
#: printer/printerdrake.pm:1785
#, c-format
msgid "Printer auto-detection"
msgstr "印表機自動偵測"

#: printer/printerdrake.pm:1151
#, c-format
msgid "Detecting devices..."
msgstr "正在偵測裝置..."

#: printer/printerdrake.pm:1181
#, c-format
msgid ", network printer \"%s\", port %s"
msgstr ", 網路印表機 \"%s\"，連接埠 %s"

#: printer/printerdrake.pm:1184
#, c-format
msgid ", printer \"%s\" on SMB/Windows server \"%s\""
msgstr ", 網路印表機 \"%s\"，位於 SMB/Windows 伺服器 \"%s\""

#: printer/printerdrake.pm:1188
#, c-format
msgid "Detected %s"
msgstr "偵測到 %s"

#: printer/printerdrake.pm:1193
#: printer/printerdrake.pm:1220
#: printer/printerdrake.pm:1238
#, c-format
msgid "Printer on parallel port #%s"
msgstr "位於並列埠 %s 的印表機"

#: printer/printerdrake.pm:1199
#, c-format
msgid "Network printer \"%s\", port %s"
msgstr "網路印表機 \"%s\"，連接埠 %s"

#: printer/printerdrake.pm:1202
#, c-format
msgid "Printer \"%s\" on SMB/Windows server \"%s\""
msgstr "網路印表機 \"%s\"，位於 SMB/Windows 伺服器 \"%s\""

#: printer/printerdrake.pm:1283
#, c-format
msgid "Local Printer"
msgstr "本機印表機"

#: printer/printerdrake.pm:1284
#, c-format
msgid "No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
"無法找到本地印表機！請手動指定印表機的所在裝置名稱。\n"
"(並列埠：/dev/lp0, /dev/lp1, ... 相當於 LPT1:, LPT2:..., \n"
"第一台 USB 印表機是：/dev/usb/lp0, 第二台：/dev/usb/lp1)。"

#: printer/printerdrake.pm:1288
#, c-format
msgid "You must enter a device or file name!"
msgstr "您需要選擇或輸入該印表機名稱或裝置項目！"

#: printer/printerdrake.pm:1297
#, c-format
msgid "No printer found!"
msgstr "找不到印表機！"

#: printer/printerdrake.pm:1305
#, c-format
msgid "Local Printers"
msgstr "本機印表機"

#: printer/printerdrake.pm:1306
#, c-format
msgid "Available printers"
msgstr "可用的印表機"

#: printer/printerdrake.pm:1310
#: printer/printerdrake.pm:1319
#, c-format
msgid "The following printer was auto-detected. "
msgstr "已偵測到下列的印表機。"

#: printer/printerdrake.pm:1312
#, fuzzy, c-format
msgid "If it is not the one you want to configure, enter a device name/file name in the input line"
msgstr ""
"下面所列出的是使用自動偵測所找到的印表機。若是找到的項目\n"
"並不是你所預期的, 那請手動輸入裝置名稱/檔案名稱"

#: printer/printerdrake.pm:1313
#, fuzzy, c-format
msgid "Alternatively, you can specify a device name/file name in the input line"
msgstr "請選擇您印表機的連接埠, 或者是輸入該裝置的名稱"

#: printer/printerdrake.pm:1314
#: printer/printerdrake.pm:1323
#, c-format
msgid "Here is a list of all auto-detected printers. "
msgstr "這裡有份所有自動偵測到的印表機列表。"

#: printer/printerdrake.pm:1316
#, c-format
msgid "Please choose the printer you want to set up or enter a device name/file name in the input line"
msgstr "請選擇您要設定的印表機，或者在輸入欄位中輸入該裝置或檔案的名稱"

#: printer/printerdrake.pm:1317
#, c-format
msgid "Please choose the printer to which the print jobs should go or enter a device name/file name in the input line"
msgstr "請選擇您印表機的連接埠, 或者是輸入該裝置的名稱"

#: printer/printerdrake.pm:1321
#, c-format
msgid "The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
msgstr "印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。"

#: printer/printerdrake.pm:1322
#, c-format
msgid "Currently, no alternative possibility is available"
msgstr ""

#: printer/printerdrake.pm:1325
#, c-format
msgid "Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\"."
msgstr "請選擇您要設定的印表機。印表機的相關設定將會自動完成。若您的印表機沒有正確的被偵測到或是您喜歡一個自訂的印表機設定，請打開 「手動設定」。"

#: printer/printerdrake.pm:1326
#, c-format
msgid "Please choose the printer to which the print jobs should go."
msgstr "請選取印表工作應該送達的印表機。"

#: printer/printerdrake.pm:1328
#, c-format
msgid "Please choose the port that your printer is connected to or enter a device name/file name in the input line"
msgstr "請選擇您印表機的連接埠，或在輸入欄位中輸入該裝置或檔案的名稱"

#: printer/printerdrake.pm:1329
#, c-format
msgid "Please choose the port that your printer is connected to."
msgstr "請選取印表機所連接的連接埠。"

#: printer/printerdrake.pm:1331
#, c-format
msgid " (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
" (並列埠：/dev/lp0, /dev/lp1, ...... 相當於 LPT1:, LPT2:....\n"
"第一台 USB 印表機是：/dev/usb/lp0, 第二台：/dev/usb/lp1)。"

#: printer/printerdrake.pm:1335
#, c-format
msgid "You must choose/enter a printer/device!"
msgstr "您必須選擇/輸入一印表機/裝置！"

#: printer/printerdrake.pm:1375
#: printer/printerdrake.pm:1437
#: printer/printerdrake.pm:1527
#: printer/printerdrake.pm:1665
#: printer/printerdrake.pm:1740
#: printer/printerdrake.pm:1892
#: printer/printerdrake.pm:1978
#: printer/printerdrake.pm:1987
#: printer/printerdrake.pm:1996
#: printer/printerdrake.pm:2007
#, c-format
msgid "Aborting"
msgstr "放棄"

#: printer/printerdrake.pm:1410
#, c-format
msgid "Remote lpd Printer Options"
msgstr "遠端 lpd 印表機選項"

#: printer/printerdrake.pm:1411
#, c-format
msgid "To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."
msgstr ""
"如要使用遠端的 lpd 印表機, 您必須要指定用來提供\n"
"印表服務的遠端列印伺服主機名稱, 以及分享出來\n"
"印表機名稱。"

#: printer/printerdrake.pm:1412
#, c-format
msgid "Remote host name"
msgstr "遠端主機名稱"

#: printer/printerdrake.pm:1413
#, c-format
msgid "Remote printer name"
msgstr "遠端印表機名稱"

#: printer/printerdrake.pm:1416
#, c-format
msgid "Remote host name missing!"
msgstr "沒有指定遠端主機名稱 !"

#: printer/printerdrake.pm:1420
#, c-format
msgid "Remote printer name missing!"
msgstr "沒有指定印表機名稱 !"

#: printer/printerdrake.pm:1449
#: printer/printerdrake.pm:2025
#: standalone/drakTermServ:445
#: standalone/drakTermServ:747
#: standalone/drakTermServ:764
#: standalone/drakTermServ:1480
#: standalone/drakTermServ:1488
#: standalone/drakTermServ:1500
#: standalone/drakbackup:512
#: standalone/drakbackup:618
#: standalone/drakbackup:653
#: standalone/drakbackup:773
#: standalone/harddrake2:256
#, c-format
msgid "Information"
msgstr "資訊"

#: printer/printerdrake.pm:1449
#: printer/printerdrake.pm:2025
#, c-format
msgid "Detected model: %s %s"
msgstr "偵測到的型號：%s %s"

#: printer/printerdrake.pm:1531
#: printer/printerdrake.pm:1785
#, c-format
msgid "Scanning network..."
msgstr "掃描網路中..."

#: printer/printerdrake.pm:1543
#: printer/printerdrake.pm:1564
#, c-format
msgid ", printer \"%s\" on server \"%s\""
msgstr ", 印表機 \"%s\", 位於主機 \"%s\""

#: printer/printerdrake.pm:1546
#: printer/printerdrake.pm:1567
#, c-format
msgid "Printer \"%s\" on server \"%s\""
msgstr "印表機 \"%s\", 位於 \"%s\""

#: printer/printerdrake.pm:1588
#, c-format
msgid "SMB (Windows 9x/NT) Printer Options"
msgstr "網路芳鄰 (SMB, Windows 9x/NT) 印表機選項"

#: printer/printerdrake.pm:1589
#, c-format
msgid "To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information."
msgstr ""
"如要使用網路芳鄰印表機, 您必須要提供主機網芳名稱 \n"
"(注意! 這個名稱與 TCP/IP 的主機名稱可能並不相同), \n"
"有時還必須指定列印伺服器的 IP 位址、分享出來的印表\n"
"機名稱、適當的使用者帳號與密碼, 以及工作群組的資訊。"

#: printer/printerdrake.pm:1590
#, c-format
msgid " If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed."
msgstr "如果偵測出來的印表機是您所需要的, 你可以選擇該項目, 並輸入存取的使用者名稱、密碼, 必要時並輸入群組名稱。"

#: printer/printerdrake.pm:1592
#, c-format
msgid "SMB server host"
msgstr "SMB 主機名稱”"

#: printer/printerdrake.pm:1593
#, c-format
msgid "SMB server IP"
msgstr "SMB 伺服器 IP"

#: printer/printerdrake.pm:1594
#, c-format
msgid "Share name"
msgstr "印表機名稱"

#: printer/printerdrake.pm:1597
#, c-format
msgid "Workgroup"
msgstr "工作群組"

#: printer/printerdrake.pm:1599
#, c-format
msgid "Auto-detected"
msgstr "自動偵測"

#: printer/printerdrake.pm:1609
#, c-format
msgid "Either the server name or the server's IP must be given!"
msgstr "伺服器的主機名稱或者是 IP 必須指定"

#: printer/printerdrake.pm:1613
#, c-format
msgid "Samba share name missing!"
msgstr "Samba 分享的名稱沒指定 !"

#: printer/printerdrake.pm:1619
#, c-format
msgid "SECURITY WARNING!"
msgstr "安全性警告"

#: printer/printerdrake.pm:1620
#, c-format
msgid ""
"You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\".\n"
"\n"
"We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall):\n"
"\n"
"Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account.\n"
"\n"
"Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
"\n"
msgstr ""
"您目前打算使用一組帳號與密碼以便於能夠存取 Windows 主機來進行列印的工作。不過您需要注意的是, 因為系統是呼叫 Samba 的程式軟體連線到 Windows 主機, 所以執行程式時會在命令列加上您所設定輸入的帳號密碼。這可能會有一些安全性問題, 比方有使用者可以執行 ps aux指令來查看您帳號密碼內容。\n"
"\n"
"所以建議您可以使用下面方式：\n"
"\n"
"在 Windows 主機設置不需要密碼的帳號, 比方「GUEST」, 然後只有開放該帳號具備列印的功能。請注意, 千萬不要直接把 administrator 帳號設定為不需要密碼, 然後直接使用該 administrator 登入, 因為這是很危險的。\n"
"\n"
"或者是您可以設定您的 Windows 機器能夠讓印表機與 LPD 協定配合, 如此您就可以在 Printerdrake 程式內使用「%s」連線類型進行設定與列印。\n"
"\n"

#: printer/printerdrake.pm:1630
#, c-format
msgid ""
"Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake.\n"
"\n"
msgstr "請設定好您的 Windows 主機的服務, 確認印表機能夠在 IPP 通訊協定上正常運作, 以便於在 PrinterDrake 程式內使用 \"%s\" 連線能夠存取到。\n"

#: printer/printerdrake.pm:1633
#, c-format
msgid ""
"Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client.\n"
"\n"
"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
"將您的印表機安裝在 Linux 伺服器上且讓您的 Windows 機器以客戶端連線到 Linux 伺服器\n"
"\n"
"您確定要繼續進行設定這台印表機下去嗎?"

#: printer/printerdrake.pm:1711
#, c-format
msgid "NetWare Printer Options"
msgstr "NetWare 印表機選項"

#: printer/printerdrake.pm:1712
#, c-format
msgid "To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."
msgstr ""
"如要使用 NetWare 印表機, 您必須要提供 NetWare\n"
"列印伺服器的主機名稱 (注意! 這個名稱與 TCP/IP \n"
"的主機名稱可能並不相同), 還要有分享出來的列印\n"
"佇列名稱, 以及適當的使用者帳號與密碼。"

#: printer/printerdrake.pm:1713
#, c-format
msgid "Printer Server"
msgstr "列印伺服器名稱"

#: printer/printerdrake.pm:1714
#, c-format
msgid "Print Queue Name"
msgstr "列印佇列名稱"

#: printer/printerdrake.pm:1719
#, c-format
msgid "NCP server name missing!"
msgstr "NCP 伺服器名稱沒指定!"

#: printer/printerdrake.pm:1723
#, c-format
msgid "NCP queue name missing!"
msgstr "NCP 列印佇列名稱名稱沒指定"

#: printer/printerdrake.pm:1797
#: printer/printerdrake.pm:1817
#, c-format
msgid ", host \"%s\", port %s"
msgstr ", 主機 \"%s\", 連接埠 %s"

#: printer/printerdrake.pm:1800
#: printer/printerdrake.pm:1820
#, c-format
msgid "Host \"%s\", port %s"
msgstr "主機 \"%s\", 連接埠 %s"

#: printer/printerdrake.pm:1841
#, c-format
msgid "TCP/Socket Printer Options"
msgstr "TCP/Socket 印表機選項"

#: printer/printerdrake.pm:1843
#, c-format
msgid "Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
"請由清單內選擇您預期的印表機項目, 並且輸入主機名稱、\n"
"IP等資訊, 必要時請輸入該連結埠號 (預設使用 port 9100)。"

#: printer/printerdrake.pm:1844
#, c-format
msgid "To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware."
msgstr ""
"要透過TCP/socket這類型的印表機進行列印, 您需要\n"
"提供該印表機的主機名稱, 同時也可能需要選擇性輸入\n"
"所在Port的位址。在大部分的HP-JetDirect印表機\n"
"伺服主機所使用的Port多半為9100, 其餘類型的印表機\n"
"就不一定為這個數值。建議您先閱讀印表機所提供的\n"
"手冊, 尋找出你目前使用這款印表機的相關硬體資訊。"

#: printer/printerdrake.pm:1848
#, c-format
msgid "Printer host name or IP missing!"
msgstr "沒指定印表機主機名稱或是 IP！"

#: printer/printerdrake.pm:1871
#, c-format
msgid "Printer host name or IP"
msgstr "印表機主機名稱或是 IP"

#: printer/printerdrake.pm:1927
#, c-format
msgid "Refreshing Device URI list..."
msgstr "正在更新設備 URL 列表..."

#: printer/printerdrake.pm:1930
#: printer/printerdrake.pm:1932
#, c-format
msgid "Printer Device URI"
msgstr "印表機的 URI"

#: printer/printerdrake.pm:1931
#, c-format
msgid "You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."
msgstr ""
"您可以直接使用 URI 的方式存取該印表機。URI 必須完整輸入\n"
"CUPS伺服器所在位址, 或者是用 Foomatic 規格方式輸入。\n"
"請注意, 並不是所有的 URI 類型都能夠被所有的 spooler 支援。"

#: printer/printerdrake.pm:1957
#, c-format
msgid "A valid URI must be entered!"
msgstr "必須輸入完整的 URI 位址！"

#: printer/printerdrake.pm:2060
#, fuzzy, c-format
msgid "Pipe into command"
msgstr "使用 Pipe 管線方式組成列印工作"

#: printer/printerdrake.pm:2061
#, c-format
msgid "Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."
msgstr ""

#: printer/printerdrake.pm:2062
#, c-format
msgid "Command line"
msgstr "指令列"

#: printer/printerdrake.pm:2066
#, fuzzy, c-format
msgid "A command line must be entered!"
msgstr "必須輸入完整的 URI 位址！"

#: printer/printerdrake.pm:2104
#, c-format
msgid "On many HP printers there are special functions available, maintenance (ink level checking, nozzle cleaning. head alignment, ...) on all not too old inkjets, scanning on multi-function devices, and memory card access on printers with card readers. "
msgstr ""

#: printer/printerdrake.pm:2106
#, c-format
msgid "To access these extra functions on your HP printer, it must be set up with the appropriate software: "
msgstr ""

#: printer/printerdrake.pm:2107
#, c-format
msgid "Either with the newer HPLIP which allows printer maintenance through the easy-to-use graphical application \"Toolbox\" and four-edge full-bleed on newer PhotoSmart models "
msgstr ""

#: printer/printerdrake.pm:2108
#, c-format
msgid "or with the older HPOJ which allows only scanner and memory card access, but could help you in case of failure of HPLIP. "
msgstr ""

#: printer/printerdrake.pm:2110
#, c-format
msgid "What is your choice (choose \"None\" for non-HP printers)? "
msgstr ""

#: printer/printerdrake.pm:2111
#: printer/printerdrake.pm:2112
#: printer/printerdrake.pm:2138
#: printer/printerdrake.pm:2144
#: printer/printerdrake.pm:2170
#, c-format
msgid "HPLIP"
msgstr ""

#: printer/printerdrake.pm:2111
#: printer/printerdrake.pm:2114
#: printer/printerdrake.pm:2270
#: printer/printerdrake.pm:2276
#: printer/printerdrake.pm:2287
#, c-format
msgid "HPOJ"
msgstr ""

#: printer/printerdrake.pm:2119
#, c-format
msgid "Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"
msgstr ""

#: printer/printerdrake.pm:2138
#: printer/printerdrake.pm:2270
#, c-format
msgid "Installing %s package..."
msgstr "正在安裝套件 %s..."

#: printer/printerdrake.pm:2145
#: printer/printerdrake.pm:2277
#, c-format
msgid "Only printing will be possible on the %s."
msgstr ""

#: printer/printerdrake.pm:2160
#, c-format
msgid "Could not remove your old HPOJ configuration file %s for your %s! "
msgstr ""

#: printer/printerdrake.pm:2162
#, c-format
msgid "Please remove the file manually and restart HPOJ."
msgstr ""

#: printer/printerdrake.pm:2170
#: printer/printerdrake.pm:2287
#, c-format
msgid "Checking device and configuring %s..."
msgstr "正在檢查與設定 %s 中..."

#: printer/printerdrake.pm:2189
#, fuzzy, c-format
msgid "Which printer do you want to set up with HPLIP?"
msgstr "您要使用那個通訊協定?"

#: printer/printerdrake.pm:2218
#: printer/printerdrake.pm:2331
#, c-format
msgid "Installing SANE packages..."
msgstr "正在安裝套件 SANE..."

#: printer/printerdrake.pm:2231
#: printer/printerdrake.pm:2344
#, c-format
msgid "Scanning on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2246
#, c-format
msgid "Using and Maintaining your %s"
msgstr "使用與維護您的 %s"

#: printer/printerdrake.pm:2371
#, c-format
msgid "Installing mtools packages..."
msgstr "正在安裝套件 mtools..."

#: printer/printerdrake.pm:2379
#, c-format
msgid "Photo memory card access on the %s will not be possible."
msgstr ""

#: printer/printerdrake.pm:2395
#, c-format
msgid "Scanning on your HP multi-function device"
msgstr "正在掃描您的 HP 多功能裝置"

#: printer/printerdrake.pm:2404
#, c-format
msgid "Photo memory card access on your HP multi-function device"
msgstr ""

#: printer/printerdrake.pm:2421
#, c-format
msgid "Configuring device..."
msgstr "設定裝置中..."

#: printer/printerdrake.pm:2455
#, c-format
msgid "Making printer port available for CUPS..."
msgstr ""

#: printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2715
#: printer/printerdrake.pm:2857
#, c-format
msgid "Reading printer database..."
msgstr "正在讀取印表機資料 ..."

#: printer/printerdrake.pm:2674
#, c-format
msgid "Enter Printer Name and Comments"
msgstr "輸入印表機名稱及註解"

#: printer/printerdrake.pm:2678
#: printer/printerdrake.pm:3965
#, c-format
msgid "Name of printer should contain only letters, numbers and the underscore"
msgstr "印表機的名稱應該只包含英文字母、數字與底線這類字元"

#: printer/printerdrake.pm:2684
#: printer/printerdrake.pm:3970
#, c-format
msgid ""
"The printer \"%s\" already exists,\n"
"do you really want to overwrite its configuration?"
msgstr ""
"這台 \"%s\" 印表機已經存在了, \n"
"您確定要覆蓋這台印表機的組態設定嗎？"

#: printer/printerdrake.pm:2691
#, c-format
msgid "The printer name \"%s\" has more than 12 characters which can make the printer unaccessible from Windows clients. Do you really want to use this name?"
msgstr ""

#: printer/printerdrake.pm:2700
#, c-format
msgid "Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users."
msgstr ""
"每一個印表機都需要指定一個名稱 (比方像是 printer)。\n"
"至於描述與位置欄位可以不必填入，因為這些欄位是註解。"

#: printer/printerdrake.pm:2701
#, c-format
msgid "Name of printer"
msgstr "印表機名稱"

#: printer/printerdrake.pm:2702
#: standalone/drakconnect:570
#: standalone/harddrake2:37
#: standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Description"
msgstr "描述"

#: printer/printerdrake.pm:2703
#: standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Location"
msgstr "位置"

#: printer/printerdrake.pm:2720
#, c-format
msgid "Preparing printer database..."
msgstr "正在準備印表機資料"

#: printer/printerdrake.pm:2836
#, c-format
msgid "Your printer model"
msgstr "您的印表機型號"

#: printer/printerdrake.pm:2837
#, c-format
msgid ""
"Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen.\n"
"\n"
"For your printer Printerdrake has found:\n"
"\n"
"%s"
msgstr ""
"PrinterDrake 程式已經比較了現有資料庫內以及自動偵測的結果, 以便於能夠找出最適用的印表機類型。這個結果可能有問題, 尤其您的印表機的項目並沒有登記在目前已知的資料庫內時, 所以請檢視這個結果是否正確, 必要時請選擇「手動選擇型號」項目挑選出正確的型號項目。\n"
"\n"
"目前 PrinterDrake 程式所找到的印表機項目如下：\n"
"\n"
"%s"

#: printer/printerdrake.pm:2842
#: printer/printerdrake.pm:2845
#, c-format
msgid "The model is correct"
msgstr "該型號正確"

#: printer/printerdrake.pm:2843
#: printer/printerdrake.pm:2844
#: printer/printerdrake.pm:2847
#, c-format
msgid "Select model manually"
msgstr "手動選擇型號"

#: printer/printerdrake.pm:2870
#, c-format
msgid ""
"\n"
"\n"
"Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted."
msgstr ""
"\n"
"\n"
"請檢視 PrinterDrake 程式所自動偵測到的印表機型號是否正確。\n"
"您也可以尋找檢視下面的印表機清單。"

#: printer/printerdrake.pm:2889
#, c-format
msgid "Install a manufacturer-supplied PPD file"
msgstr ""

#: printer/printerdrake.pm:2920
#, c-format
msgid "Every PostScript printer is delivered with a PPD file which describes the printer's options and features."
msgstr ""

#: printer/printerdrake.pm:2921
#, c-format
msgid "This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer."
msgstr ""

#: printer/printerdrake.pm:2922
#, c-format
msgid "You can find the PPD files also on the manufacturer's web sites."
msgstr ""

#: printer/printerdrake.pm:2923
#, c-format
msgid "If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too."
msgstr ""

#: printer/printerdrake.pm:2924
#, c-format
msgid "Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware"
msgstr ""

#: printer/printerdrake.pm:2925
#, c-format
msgid "Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."
msgstr ""

#: printer/printerdrake.pm:2927
#, fuzzy, c-format
msgid "Install PPD file from"
msgstr "安裝"

#: printer/printerdrake.pm:2930
#: printer/printerdrake.pm:2938
#: standalone/scannerdrake:183
#: standalone/scannerdrake:192
#: standalone/scannerdrake:242
#: standalone/scannerdrake:250
#, c-format
msgid "Floppy Disk"
msgstr "磁碟片"

#: printer/printerdrake.pm:2931
#: printer/printerdrake.pm:2940
#: standalone/scannerdrake:184
#: standalone/scannerdrake:194
#: standalone/scannerdrake:243
#: standalone/scannerdrake:252
#, c-format
msgid "Other place"
msgstr "其他地方"

#: printer/printerdrake.pm:2946
#, c-format
msgid "Select PPD file"
msgstr "選擇 PPD 檔案"

#: printer/printerdrake.pm:2950
#, c-format
msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""

#: printer/printerdrake.pm:2956
#, c-format
msgid "The PPD file %s does not conform with the PPD specifications!"
msgstr ""

#: printer/printerdrake.pm:2967
#, c-format
msgid "Installing PPD file..."
msgstr "正在安裝 PPD 檔案..."

#: printer/printerdrake.pm:3084
#, c-format
msgid "OKI winprinter configuration"
msgstr "OKI Windows 印表機設定"

#: printer/printerdrake.pm:3085
#, c-format
msgid ""
"You are configuring an OKI laser winprinter. These printers\n"
"use a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver."
msgstr ""
"您目前是設定使用 OKI 雷射印表機項目。這類的印表機\n"
"使用一種很特殊的傳輸溝通協定, 因此這類印表機一定要\n"
"安裝在電腦第一個連接埠位置上才能夠正常工作。\n"
"所以現在請您先確定您目前的印表機已經正確地安置在\n"
"第一個連接埠上, 以便於才能夠正在列印測試頁內容。\n"
"否則列印功能將會無法正常工作。"

#: printer/printerdrake.pm:3110
#: printer/printerdrake.pm:3140
#, c-format
msgid "Lexmark inkjet configuration"
msgstr "Lexmark 噴墨印表機設定"

#: printer/printerdrake.pm:3111
#, c-format
msgid "The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to."
msgstr ""
"Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n"
"的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n"
"印表機已經正確連結到您本地端電腦上, 設定該印表機的\n"
"連結位置。"

#: printer/printerdrake.pm:3141
#, c-format
msgid "To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program."
msgstr ""
"若是希望能夠使用這台 Lexmark 噴墨印表機進行列印的話\n"
"您需要由 Lexmark 網站 (http://www.lexmark.com) 首頁上\n"
"尋找相關連結, 下載這台印表機的驅動程式。比方當您連上\n"
"Lexmark 網站首頁後, 請點選 \"Drivers\" 按鈕, 選擇您\n"
"目前使用該款印表機型號, 並確認是選取使用 \"Linux\"的\n"
"版本。一般來說, 您下載回來的檔案, 可能是 RPM 套件檔案\n"
"或者是幾個 shell script (執行該檔案將會啟動安裝程式)。\n"
"一般來說, 您並不需要透過圖行化的前端介面來進行相關的\n"
"的設定。然後使用 \"lexmarkmaintain\" 程式項目來列印噴頭\n"
"校正的工作設定。"

#: printer/printerdrake.pm:3151
#, c-format
msgid "Lexmark X125 configuration"
msgstr "Lexmark X125 多功能事務機設定"

#: printer/printerdrake.pm:3152
#, fuzzy, c-format
msgid "The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to."
msgstr ""
"Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n"
"的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n"
"印表機已經正確連結到您本地端電腦上, 設定該印表機的\n"
"連結位置。"

#: printer/printerdrake.pm:3174
#, c-format
msgid "Samsung ML/QL-85G configuration"
msgstr "Samsung ML/QL-85G 設定"

#: printer/printerdrake.pm:3175
#: printer/printerdrake.pm:3202
#, fuzzy, c-format
msgid "The driver for this printer only supports printers locally connected on the first parallel port, no printers on remote machines or print server boxes or on other parallel ports. Please connect your printer to the first parallel port or configure it on the machine where it is connected to."
msgstr ""
"Lexmark 所提供的噴墨印表機驅動程式只有支援本機印表機\n"
"的列印的功能, 將無法使用這類遠端印表機。請確認您目前\n"
"印表機已經正確連結到您本地端電腦上, 設定該印表機的\n"
"連結位置。"

#: printer/printerdrake.pm:3201
#, fuzzy, c-format
msgid "Canon LBP-460/660 configuration"
msgstr "手動組態設定"

#: printer/printerdrake.pm:3220
#, c-format
msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""

#: printer/printerdrake.pm:3369
#, c-format
msgid ""
"Printer default settings\n"
"\n"
"You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."
msgstr ""
"預設印表機設定\n"
"\n"
"您需要確定紙張的大小與墨水的種類設定都正確無誤。\n"
"請注意一下, 當使用高品質列印時所花費的時間會越久。"

#: printer/printerdrake.pm:3494
#, c-format
msgid "Printer default settings"
msgstr "印表機型號選擇"

#: printer/printerdrake.pm:3501
#, c-format
msgid "Option %s must be an integer number!"
msgstr "%s 參數需要為整數!"

#: printer/printerdrake.pm:3505
#, c-format
msgid "Option %s must be a number!"
msgstr "%s 選項一定要為數字!"

#: printer/printerdrake.pm:3509
#, c-format
msgid "Option %s out of range!"
msgstr "%s 參數超出允許範圍！"

#: printer/printerdrake.pm:3560
#, c-format
msgid ""
"Do you want to set this printer (\"%s\")\n"
"as the default printer?"
msgstr "您要使用這台印表機 (\"%s\") 為預設印表機嗎？"

#: printer/printerdrake.pm:3575
#, c-format
msgid "Test pages"
msgstr "列印測試頁"

#: printer/printerdrake.pm:3576
#, c-format
msgid ""
"Please select the test pages you want to print.\n"
"Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."
msgstr ""
"您選取你要列印的測試頁。\n"
"注意: 圖形測試頁會花費比較久的時間來列印, \n"
"若是該印表機硬體可用記憶體很少的話, 列印時間\n"
"能夠會需要花費更久時間。\n"
"一般情況來說, 選擇標準的測試頁就很足夠了。"

#: printer/printerdrake.pm:3580
#, c-format
msgid "No test pages"
msgstr "不列印測試頁"

#: printer/printerdrake.pm:3581
#, c-format
msgid "Print"
msgstr "列印"

#: printer/printerdrake.pm:3606
#, c-format
msgid "Standard test page"
msgstr "標準列印測試頁"

#: printer/printerdrake.pm:3609
#, c-format
msgid "Alternative test page (Letter)"
msgstr "Letter 紙張列印測試頁"

#: printer/printerdrake.pm:3612
#, c-format
msgid "Alternative test page (A4)"
msgstr "A4 紙張列印測試頁"

#: printer/printerdrake.pm:3614
#, c-format
msgid "Photo test page"
msgstr "圖形列印測試頁"

#: printer/printerdrake.pm:3618
#, c-format
msgid "Do not print any test page"
msgstr "不要列印任何測試頁"

#: printer/printerdrake.pm:3626
#: printer/printerdrake.pm:3809
#, c-format
msgid "Printing test page(s)..."
msgstr "正在列印測試頁..."

#: printer/printerdrake.pm:3646
#, c-format
msgid "Skipping photo test page."
msgstr "略過照片列印測試頁"

#: printer/printerdrake.pm:3663
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
"Printing status:\n"
"%s\n"
"\n"
msgstr ""
"測試頁已經被送到列印伺服程式了.\n"
"於印表機開始之前, 它可能需要一點時間.\n"
"目前的列印狀態:\n"
"%s\n"
"\n"

#: printer/printerdrake.pm:3667
#, c-format
msgid ""
"Test page(s) have been sent to the printer.\n"
"It may take some time before the printer starts.\n"
msgstr ""
"測試頁已經被送到列印伺服程式了, 接著可能需要花\n"
"一點時間, 印表機才會把結果印出來。\n"

#: printer/printerdrake.pm:3677
#, c-format
msgid "Did it work properly?"
msgstr "列印正常嗎？"

#: printer/printerdrake.pm:3700
#: printer/printerdrake.pm:5049
#, c-format
msgid "Raw printer"
msgstr "Raw 印表機"

#: printer/printerdrake.pm:3738
#, c-format
msgid "To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily.\n"
msgstr ""
"要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \n"
"\"%s <檔案名稱>\"\n"
"或者是使用圖型介面程式:\n"
"\"xpp <檔案名稱>\"\n"
"或者是\n"
"\"kprinter <檔案名稱>\"\n"
"即可。您可以透過圖型介面程式簡單的選擇印表機項目, \n"
"包含修改相關的列印選項。\n"

#: printer/printerdrake.pm:3740
#, c-format
msgid "These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application.\n"
msgstr ""
"這個指令功能, 其實您也可以在許多應用程式列印對話方塊的 \"列印命令\" 使用它。\n"
"但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由相關應用程式提供。\n"

#: printer/printerdrake.pm:3743
#: printer/printerdrake.pm:3760
#: printer/printerdrake.pm:3770
#, c-format
msgid ""
"\n"
"The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". "
msgstr ""
"\n"
"「%s」指令, 能夠讓您修改某個設定列印工作項目的參數設定。\n"
"簡單一點的方式就是在命令列加上您要填入的設定值, 比方「%s <檔案>」。 "

#: printer/printerdrake.pm:3746
#: printer/printerdrake.pm:3786
#, c-format
msgid ""
"To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
msgstr ""
"要獲得目前這台印表機可用的相關參數選項, 或者是查看下面清單\n"
"所顯示的項目, 請點選點選『列印選項清單』按鈕。%s%s%s\n"
"\n"

#: printer/printerdrake.pm:3750
#, c-format
msgid ""
"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
"下面包含了目前印表機支援的選項清單:\n"
"\n"

#: printer/printerdrake.pm:3755
#: printer/printerdrake.pm:3765
#, c-format
msgid "To print a file from the command line (terminal window) use the command \"%s <file>\".\n"
msgstr "要在命令列環境(終端機視窗)列印檔案的話, 您可以執行這個指令 \"%s <檔案>\".\n"

#: printer/printerdrake.pm:3757
#: printer/printerdrake.pm:3767
#: printer/printerdrake.pm:3777
#, c-format
msgid "This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application.\n"
msgstr ""
"這個指令功能, 其實您也可以在許多應用程式列印對話方塊的\n"
"『列印命令』使用它。\n"
"但是這邊不提供所謂的檔案名稱, 因為相關檔案的列印功能是由\n"
"相關應用程式提供。\n"

#: printer/printerdrake.pm:3762
#: printer/printerdrake.pm:3772
#, c-format
msgid "To get a list of the options available for the current printer click on the \"Print option list\" button."
msgstr "要獲得目前這台印表機可用的相關參數選項, 請點選 \"Print option list 印表機選項表\"按鈕."

#: printer/printerdrake.pm:3775
#, c-format
msgid "To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\".\n"
msgstr "要在終端機命令列環境列印檔案的話, 您可以執行這個指令: \"%s <檔案>\" 或者是 \"%s <檔案>\"。\n"

#: printer/printerdrake.pm:3779
#, c-format
msgid ""
"You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs.\n"
"If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams.\n"
msgstr ""
"您也可以使用圖形介面 \"xpdq\" 來設定選項處理列印工作.\n"
"如果您目前是使用 KDE 桌面環境的話, 你有一個 \"panic button 恐慌按鈕\" 圖示在桌面上, 標示為 \"STOP Printer! 停止印表機!\" 以停止全部的列印工作, 當你按下它時. 這對如卡紙來說十分有用.\n"

#: printer/printerdrake.pm:3783
#, c-format
msgid ""
"\n"
"The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\".\n"
msgstr ""
"\n"
"\"%s\" 與 \"%s\" 指令, 能夠讓您修改某個設定列印工作項目\n"
"的參數設定。簡單一點的方式就是在命令列加上您要填入的設定值, \n"
"比方 \"%s <檔案>\"。\n"

#: printer/printerdrake.pm:3793
#, c-format
msgid "Printing/Scanning/Photo Cards on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3794
#, c-format
msgid "Printing/Scanning on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3796
#, c-format
msgid "Printing/Photo Card Access on \"%s\""
msgstr ""

#: printer/printerdrake.pm:3798
#, fuzzy, c-format
msgid "Using/Maintaining the printer \"%s\""
msgstr "使用「%s」印表機進行列印"

#: printer/printerdrake.pm:3799
#, c-format
msgid "Printing on the printer \"%s\""
msgstr "使用「%s」印表機進行列印"

#: printer/printerdrake.pm:3805
#, c-format
msgid "Print option list"
msgstr "列印選項清單"

#: printer/printerdrake.pm:3827
#, c-format
msgid ""
"Your %s is set up with HP's HPLIP driver software. This way many special features of your printer are supported.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3830
#, c-format
msgid "The scanner in your printer can be used with the usual SANE software, for example Kooka or XSane (Both in the Multimedia/Graphics menu). "
msgstr ""

#: printer/printerdrake.pm:3831
#, c-format
msgid ""
"Run Scannerdrake (Hardware/Scanner in Mandrakelinux Control Center) to share your scanner on the network.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3835
#, c-format
msgid "The memory card readers in your printer can be accessed like a usual USB mass storage device. "
msgstr ""

#: printer/printerdrake.pm:3836
#, c-format
msgid ""
"After inserting a card a hard disk icon to access the card should appear on your desktop.\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3838
#, c-format
msgid "The memory card readers in your printer can be accessed using HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) clicking the \"Access Photo Cards...\" button on the \"Functions\" tab. "
msgstr ""

#: printer/printerdrake.pm:3839
#, c-format
msgid ""
"Note that this is very slow, reading the pictures from the camera or a USB card reader is usually faster.\n"
"\n"
msgstr ""
"請注意這將花費許多時間，由數位相機或 USB 讀卡機讀取圖片通常會較快。\n"
"\n"

#: printer/printerdrake.pm:3842
#, c-format
msgid ""
"HP's Printer Toolbox (Menu: System/Monitoring/HP Printer Toolbox) offers a lot of status monitoring and maintenance functions for your %s:\n"
"\n"
msgstr ""

#: printer/printerdrake.pm:3843
#, c-format
msgid " - Ink level/status info\n"
msgstr ""

#: printer/printerdrake.pm:3844
#, c-format
msgid " - Ink nozzle cleaning\n"
msgstr ""

#: printer/printerdrake.pm:3845
#, c-format
msgid " - Print head alignment\n"
msgstr ""

#: printer/printerdrake.pm:3846
#, fuzzy, c-format
msgid " - Color calibration\n"
msgstr "Xorg 設定"

#: printer/printerdrake.pm:3861
#, c-format
msgid ""
"Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information.\n"
"\n"
"You do not need to run \"scannerdrake\" for setting up scanning on this device, you only need to use \"scannerdrake\" if you want to share the scanner on the network."
msgstr ""

#: printer/printerdrake.pm:3887
#, c-format
msgid "Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists."
msgstr ""

#: printer/printerdrake.pm:3929
#: printer/printerdrake.pm:3956
#: printer/printerdrake.pm:3991
#, c-format
msgid "Transfer printer configuration"
msgstr "印表機傳送設定"

#: printer/printerdrake.pm:3930
#, c-format
msgid ""
"You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred.\n"
"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
"若是您已經設定過 %s spooler 印表機項目的話, 您可以很簡單\n"
"將組態設定內容套用給 %s 項目。能夠套用的組態項目, 包含像是\n"
"印表機的名稱、描述資訊、位置、連線類型、預設參數等等項目, \n"
"不過不包含傳送要列印的工作項目功能。\n"
"另外並不是所有的列印工作都能夠被傳輸過來, 因為下面原因：\n"

#: printer/printerdrake.pm:3933
#, c-format
msgid "CUPS does not support printers on Novell servers or printers sending the data into a free-formed command.\n"
msgstr ""
"CUPS 目前並不支援位於Novell主機上的印表機, 包含不使用free-formed\n"
"命令傳送列印資料的印表機。\n"

#: printer/printerdrake.pm:3935
#, c-format
msgid "PDQ only supports local printers, remote LPD printers, and Socket/TCP printers.\n"
msgstr ""
"PDQ 僅支援本地端印表機, 或者是遠端 LPD 的印表機, 以及\n"
"TCP/Socket 印表機類型。\n"

#: printer/printerdrake.pm:3937
#, c-format
msgid "LPD and LPRng do not support IPP printers.\n"
msgstr "PD 與 LPRng 不支援 IPP 類型的印表機。\n"

#: printer/printerdrake.pm:3939
#, c-format
msgid "In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred."
msgstr ""
"除此之外, queues 無法透過該程式建立, 或者是 \"foomatic-configure\"\n"
"無法進行傳輸。"

#: printer/printerdrake.pm:3940
#, c-format
msgid ""
"\n"
"Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred."
msgstr ""
"\n"
"透過廠商所提供的 PPD 檔案內容或者是原始性的 CUPS 驅動程式\n"
"設定的印表機無法被進行轉換動作."

#: printer/printerdrake.pm:3941
#, c-format
msgid ""
"\n"
"Mark the printers which you want to transfer and click \n"
"\"Transfer\"."
msgstr ""
"\n"
"請點選標記您要傳送的印表機項目, 然後點選 \"傳送\" 即可。"

#: printer/printerdrake.pm:3944
#, c-format
msgid "Do not transfer printers"
msgstr "不傳送印表機"

#: printer/printerdrake.pm:3945
#: printer/printerdrake.pm:3961
#, c-format
msgid "Transfer"
msgstr "傳送"

#: printer/printerdrake.pm:3957
#, c-format
msgid ""
"A printer named \"%s\" already exists under %s. \n"
"Click \"Transfer\" to overwrite it.\n"
"You can also type a new name or skip this printer."
msgstr ""
"在 %s 已經存在了一個名稱為 %s 的印表機名稱。\n"
"請點選『傳送』覆蓋內容。\n"
"您也可以另外輸入一個名稱, 或者是略過這台印表機。"

#: printer/printerdrake.pm:3978
#, c-format
msgid "New printer name"
msgstr "新印表機名稱"

#: printer/printerdrake.pm:3981
#, c-format
msgid "Transferring %s..."
msgstr "正在傳送 %s ..."

#: printer/printerdrake.pm:3992
#, c-format
msgid "You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?"
msgstr ""

#: printer/printerdrake.pm:4002
#, c-format
msgid "Refreshing printer data..."
msgstr "正在更新印表機資料 ..."

#: printer/printerdrake.pm:4011
#, c-format
msgid "Starting network..."
msgstr "啟動網路中 ..."

#: printer/printerdrake.pm:4054
#: printer/printerdrake.pm:4058
#: printer/printerdrake.pm:4060
#, c-format
msgid "Configure the network now"
msgstr "立即設定網路"

#: printer/printerdrake.pm:4055
#, c-format
msgid "Network functionality not configured"
msgstr "目前網路功能尚未設定"

#: printer/printerdrake.pm:4056
#, c-format
msgid "You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"
msgstr "您目前要開始設定遠端印表機列印的項目。要進行此項目設定的前提, 您的系統需要具備網路功能以便於進行存取動作, 但是目前網路尚未設定。如果您打算略過網路設定項目繼續進行下面的步驟的話, 關於設定使用遠端印表機功能的項目將無法設定。您打算要怎麼作呢？"

#: printer/printerdrake.pm:4059
#, c-format
msgid "Go on without configuring the network"
msgstr "略過網路設定項目繼續進行下面的步驟"

#: printer/printerdrake.pm:4094
#, fuzzy, c-format
msgid "The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
"在系統整個安裝過程中, 系統的網路服務並未啟動。建議您可以在\n"
"整個安裝完成, 重新開機進入系統後, 透過 Mandrake 控制台程式\n"
"選擇『網路』『連線』項目進行設定。此外, 後續像是印表機\n"
"的設定, 您也可以透過 Mandrake 控制台程式, 在『硬體』內的\n"
"『印表機』項目來進行設定"

#: printer/printerdrake.pm:4095
#, c-format
msgid "The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again."
msgstr ""
"網路服務的存取功能並未開啟, 而且也無法啟動這個服務項目。\n"
"請檢查一下您的設定, 甚至包含您的硬體是否設定正確無誤。\n"
"當檢查完畢後, 再重新設定遠端列印的相關項目。"

#: printer/printerdrake.pm:4105
#, c-format
msgid "Restarting printing system..."
msgstr "正在重新啟動列印系統服務 ..."

#: printer/printerdrake.pm:4135
#, c-format
msgid "high"
msgstr "高"

#: printer/printerdrake.pm:4135
#, c-format
msgid "paranoid"
msgstr "瘋狂狀態"

#: printer/printerdrake.pm:4137
#, c-format
msgid "Installing a printing system in the %s security level"
msgstr "在 %s 安全等級環境下正在安裝列印服務系統項目"

#: printer/printerdrake.pm:4138
#, c-format
msgid ""
"You are about to install the printing system %s on a system running in the %s security level.\n"
"\n"
"This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level.\n"
"\n"
"Do you really want to configure printing on this machine?"
msgstr ""
"您目前正準備在「%s」安全等級的環境安裝來安裝「%s』\n"
"這個列印系統項目。\n"
"\n"
"這個列印服務項目, 相關程式將會在幕後運作, 以便於能夠\n"
"提供相關印表功能。此外, 列印相關的服務, 也能夠經由網路\n"
"的方式進行存取, 所以某個層面來說這可能有被攻擊的危險。\n"
"因此, 在這個安全等級環境下, 將只有少部份的服務程式預設\n"
"會在開機時啟動。\n"
"\n"
"您確定要開始設定這台機器上的列印項目設定嗎？"

#: printer/printerdrake.pm:4173
#, c-format
msgid "Starting the printing system at boot time"
msgstr "於開機時啟動列印服務系統"

#: printer/printerdrake.pm:4174
#, c-format
msgid ""
"The printing system (%s) will not be started automatically when the machine is booted.\n"
"\n"
"It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks.\n"
"\n"
"Do you want to have the automatic starting of the printing system turned on again?"
msgstr ""
"列印服務系統 (%s) 將不會在系統開機時載入。\n"
"\n"
"若是您系統設定是選擇比較高的安全等級項目的話, \n"
"預設也是不會啟動列印服務的項目的。\n"
"\n"
"您希望這邊能夠設定在開機時能夠預設啟動列印\n"
"服務的項目嗎？"

#: printer/printerdrake.pm:4196
#, c-format
msgid "Checking installed software..."
msgstr "正在檢查已經安裝的軟體"

#: printer/printerdrake.pm:4202
#, c-format
msgid "Removing %s..."
msgstr "正在移除 %s"

#: printer/printerdrake.pm:4206
#, fuzzy, c-format
msgid "Could not remove the %s printing system!"
msgstr "變更列印系統"

#: printer/printerdrake.pm:4222
#, c-format
msgid "Installing %s..."
msgstr "正在安裝套件 %s..."

#: printer/printerdrake.pm:4226
#, fuzzy, c-format
msgid "Could not install the %s printing system!"
msgstr "變更列印系統"

#: printer/printerdrake.pm:4293
#, c-format
msgid "In this mode there is no local printing system, all printing requests go directly to the server specified below. Note that it is not possible to define local print queues then and if the specified server is down it cannot be printed at all from this machine."
msgstr ""

#: printer/printerdrake.pm:4295
#, c-format
msgid "Enter the host name or IP of your CUPS server and click OK if you want to use this mode, click \"Quit\" otherwise."
msgstr ""

#: printer/printerdrake.pm:4309
#, fuzzy, c-format
msgid "Name or IP of remote server:"
msgstr "遠端的 lpd 伺服器印表機"

#: printer/printerdrake.pm:4329
#, fuzzy, c-format
msgid "Setting Default Printer..."
msgstr "預設印表機"

#: printer/printerdrake.pm:4348
#, fuzzy, c-format
msgid "Local CUPS printing system or remote CUPS server?"
msgstr "遠端的 CUPS 伺服器印表機"

#: printer/printerdrake.pm:4349
#, c-format
msgid "The CUPS printing system can be used in two ways: "
msgstr "CUPS 列印系統可以下列兩種方式使用："

#: printer/printerdrake.pm:4351
#, c-format
msgid "1. The CUPS printing system can run locally. "
msgstr "1. CUPS 列印系統可以在本地端執行。"

#: printer/printerdrake.pm:4352
#, c-format
msgid "Then locally connected printers can be used and remote printers on other CUPS servers in the same network are automatically discovered. "
msgstr ""

#: printer/printerdrake.pm:4353
#, c-format
msgid "Disadvantage of this approach is, that more resources on the local machine are needed: Additional software packages need to be installed, the CUPS daemon has to run in the background and needs some memory, and the IPP port (port 631) is opened. "
msgstr ""

#: printer/printerdrake.pm:4355
#, c-format
msgid "2. All printing requests are immediately sent to a remote CUPS server. "
msgstr ""

#: printer/printerdrake.pm:4356
#, c-format
msgid "Here local resource occupation is reduced to a minimum. No CUPS daemon is started or port opened, no software infrastructure for setting up local print queues is installed, so less memory and disk space is used. "
msgstr ""

#: printer/printerdrake.pm:4357
#, c-format
msgid "Disadvantage is that it is not possible to define local printers then and if the specified server is down it cannot be printed at all from this machine. "
msgstr ""

#: printer/printerdrake.pm:4359
#, c-format
msgid "How should CUPS be set up on your machine?"
msgstr "您的 CUPS 系統應該如何設定？"

#: printer/printerdrake.pm:4363
#: printer/printerdrake.pm:4378
#: printer/printerdrake.pm:4382
#: printer/printerdrake.pm:4388
#, c-format
msgid "Remote server, specify Name or IP here:"
msgstr ""

#: printer/printerdrake.pm:4377
#, fuzzy, c-format
msgid "Local CUPS printing system"
msgstr "變更列印系統"

#: printer/printerdrake.pm:4415
#, c-format
msgid "Select Printer Spooler"
msgstr "選擇印表列印系統"

#: printer/printerdrake.pm:4416
#, c-format
msgid "Which printing system (spooler) do you want to use?"
msgstr "您打算用那一套列印系統？"

#: printer/printerdrake.pm:4464
#, fuzzy, c-format
msgid "Failed to configure printer \"%s\"!"
msgstr "正在設定「%s」印表機中 ..."

#: printer/printerdrake.pm:4478
#, c-format
msgid "Installing Foomatic..."
msgstr "正在安裝 Foomatic 套件..."

#: printer/printerdrake.pm:4484
#, c-format
msgid "Could not install %s packages, %s cannot be started!"
msgstr "無法安裝套件 %s，%s 啟動失敗！"

#: printer/printerdrake.pm:4674
#, fuzzy, c-format
msgid "The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. "
msgstr ""
"下列的印表機都已經設定過了, 您可以點選其中一個項目, \n"
"可以查看內容資訊或者是修改內容設定, 包含設定為預設印表機。"

#: printer/printerdrake.pm:4704
#, fuzzy, c-format
msgid "Display all available remote CUPS printers"
msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"

#: printer/printerdrake.pm:4705
#, c-format
msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr "更新印表機清單 (重新尋找遠端可用的所有 CUPS 印表機)"

#: printer/printerdrake.pm:4716
#, c-format
msgid "CUPS configuration"
msgstr "CUPS 設定組態"

#: printer/printerdrake.pm:4728
#, c-format
msgid "Change the printing system"
msgstr "變更列印系統"

#: printer/printerdrake.pm:4737
#, c-format
msgid "Normal Mode"
msgstr "一般模式"

#: printer/printerdrake.pm:4738
#, c-format
msgid "Expert Mode"
msgstr "專家模式"

#: printer/printerdrake.pm:4992
#: printer/printerdrake.pm:5050
#: printer/printerdrake.pm:5128
#: printer/printerdrake.pm:5137
#, c-format
msgid "Printer options"
msgstr "印表機選項"

#: printer/printerdrake.pm:5028
#, c-format
msgid "Modify printer configuration"
msgstr "修改印表機設定"

#: printer/printerdrake.pm:5030
#, c-format
msgid ""
"Printer %s%s\n"
"What do you want to modify on this printer?"
msgstr ""
"印表機 %s%s\n"
"您要修改這個印表機的那個項目？"

#: printer/printerdrake.pm:5035
#, fuzzy, c-format
msgid "This printer is disabled"
msgstr "這個分割區無法重新調整大小"

#: printer/printerdrake.pm:5037
#, c-format
msgid "Do it!"
msgstr "做吧 !"

#: printer/printerdrake.pm:5042
#: printer/printerdrake.pm:5097
#, c-format
msgid "Printer connection type"
msgstr "印表機連線方式"

#: printer/printerdrake.pm:5043
#: printer/printerdrake.pm:5103
#, c-format
msgid "Printer name, description, location"
msgstr "印表機名稱, 描述, 位置"

#: printer/printerdrake.pm:5045
#: printer/printerdrake.pm:5121
#, c-format
msgid "Printer manufacturer, model, driver"
msgstr "印表機廠商,型號,驅動程式"

#: printer/printerdrake.pm:5046
#: printer/printerdrake.pm:5122
#, c-format
msgid "Printer manufacturer, model"
msgstr "印表機廠商,型號"

#: printer/printerdrake.pm:5052
#: printer/printerdrake.pm:5132
#, c-format
msgid "Set this printer as the default"
msgstr "使用這台印表機為預設印表機"

#: printer/printerdrake.pm:5057
#: printer/printerdrake.pm:5138
#: printer/printerdrake.pm:5140
#, fuzzy, c-format
msgid "Enable Printer"
msgstr "開啟服務"

#: printer/printerdrake.pm:5060
#: printer/printerdrake.pm:5143
#: printer/printerdrake.pm:5145
#, fuzzy, c-format
msgid "Disable Printer"
msgstr "關閉服務"

#: printer/printerdrake.pm:5061
#: printer/printerdrake.pm:5148
#, c-format
msgid "Print test pages"
msgstr "列印測試頁..."

#: printer/printerdrake.pm:5062
#: printer/printerdrake.pm:5150
#, fuzzy, c-format
msgid "Learn how to use this printer"
msgstr "瞭解如何使用這台印表機"

#: printer/printerdrake.pm:5063
#: printer/printerdrake.pm:5152
#, c-format
msgid "Remove printer"
msgstr "刪除印表機"

#: printer/printerdrake.pm:5110
#, c-format
msgid "Removing old printer \"%s\"..."
msgstr "正在刪除舊的印表機 \"%s\" ..."

#: printer/printerdrake.pm:5141
#, fuzzy, c-format
msgid "Printer \"%s\" is now enabled."
msgstr "印表機 \"%s\", 位於 \"%s\""

#: printer/printerdrake.pm:5146
#, fuzzy, c-format
msgid "Printer \"%s\" is now disabled."
msgstr "Internet 連線共享目前關閉了。"

#: printer/printerdrake.pm:5183
#, c-format
msgid "Do you really want to remove the printer \"%s\"?"
msgstr "您確定要刪除印表機 \"%s\" 嗎？"

#: printer/printerdrake.pm:5187
#, c-format
msgid "Removing printer \"%s\"..."
msgstr "正在移除印表機 \"%s\"..."

#: printer/printerdrake.pm:5211
#, c-format
msgid "Default printer"
msgstr "預設印表機"

#: printer/printerdrake.pm:5212
#, c-format
msgid "The printer \"%s\" is set as the default printer now."
msgstr "這台印表機 \"%s\" 將會被設定成為預設印表機。"

#: raid.pm:42
#, fuzzy, c-format
msgid "Can not add a partition to _formatted_ RAID %s"
msgstr "無法在 _已格式_ 化的磁碟陣列 md%d 中加入分割區"

#: raid.pm:144
#, c-format
msgid "Not enough partitions for RAID level %d\n"
msgstr "分割區數目不足以用來設定成為階層 %d 的磁碟陣列\n"

#: scanner.pm:96
#, c-format
msgid "Could not create directory /usr/share/sane/firmware!"
msgstr "無法建立目錄 /usr/share/sane/firmware！"

#: scanner.pm:107
#, c-format
msgid "Could not create link /usr/share/sane/%s!"
msgstr "無法建立連結 /usr/share/sane/%s！"

#: scanner.pm:114
#, c-format
msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""

#: scanner.pm:121
#, c-format
msgid "Could not set permissions of firmware file %s!"
msgstr ""

#: scanner.pm:200
#: standalone/scannerdrake:66
#: standalone/scannerdrake:70
#: standalone/scannerdrake:78
#: standalone/scannerdrake:346
#: standalone/scannerdrake:382
#: standalone/scannerdrake:446
#: standalone/scannerdrake:490
#: standalone/scannerdrake:494
#: standalone/scannerdrake:516
#: standalone/scannerdrake:581
#, fuzzy, c-format
msgid "Scannerdrake"
msgstr "選取您的掃描器"

#: scanner.pm:201
#: standalone/scannerdrake:947
#, c-format
msgid "Could not install the packages needed to share your scanner(s)."
msgstr "無法安裝分享掃描器所需的套件。"

#: scanner.pm:202
#, c-format
msgid "Your scanner(s) will not be available for non-root users."
msgstr "您的掃描器將只供擁有管理者權限的使用者使用。"

#: security/help.pm:11
#, c-format
msgid "Accept/Refuse bogus IPv4 error messages."
msgstr ""

#: security/help.pm:13
#, c-format
msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""

#: security/help.pm:15
#, c-format
msgid " Accept/Refuse icmp echo."
msgstr ""

#: security/help.pm:17
#, c-format
msgid "Allow/Forbid autologin."
msgstr ""

#. -PO: here "ALL" is a value in a pull-down menu; translate it the same as "ALL" is
#: security/help.pm:21
#, c-format
msgid ""
"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
"If set to NONE, no issues are allowed.\n"
"\n"
"Else only /etc/issue is allowed."
msgstr ""

#: security/help.pm:27
#, c-format
msgid "Allow/Forbid reboot by the console user."
msgstr ""

#: security/help.pm:29
#, fuzzy, c-format
msgid "Allow/Forbid remote root login."
msgstr "(位於這個機器上)"

#: security/help.pm:31
#, fuzzy, c-format
msgid "Allow/Forbid direct root login."
msgstr "(位於這個機器上)"

#: security/help.pm:33
#, c-format
msgid "Allow/Forbid the list of users on the system on display managers (kdm and gdm)."
msgstr ""

#: security/help.pm:35
#, c-format
msgid ""
"Allow/forbid to export display when\n"
"passing from the root account to the other users.\n"
"\n"
"See pam_xauth(8) for more details.'"
msgstr ""

#: security/help.pm:40
#, c-format
msgid ""
"Allow/Forbid X connections:\n"
"\n"
"- ALL (all connections are allowed),\n"
"\n"
"- LOCAL (only connection from local machine),\n"
"\n"
"- NONE (no connection)."
msgstr ""

#: security/help.pm:48
#, c-format
msgid ""
"The argument specifies if clients are authorized to connect\n"
"to the X server from the network on the tcp port 6000 or not."
msgstr ""

#. -PO: here "ALL", "LOCAL" and "NONE" are values in a pull-down menu; translate them the same as they're
#: security/help.pm:53
#, c-format
msgid ""
"Authorize:\n"
"\n"
"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if set to \"ALL\",\n"
"\n"
"- only local ones if set to \"LOCAL\"\n"
"\n"
"- none if set to \"NONE\".\n"
"\n"
"To authorize the services you need, use /etc/hosts.allow (see hosts.allow(5))."
msgstr ""

#: security/help.pm:63
#, c-format
msgid ""
"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
"symlink /etc/security/msec/server to point to\n"
"/etc/security/msec/server.<SERVER_LEVEL>.\n"
"\n"
"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
"add a service if it is present in the file during the installation of\n"
"packages."
msgstr ""

#: security/help.pm:72
#, c-format
msgid ""
"Enable/Disable crontab and at for users.\n"
"\n"
"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
"and crontab(1))."
msgstr ""

#: security/help.pm:77
#, c-format
msgid "Enable/Disable syslog reports to console 12"
msgstr ""

#: security/help.pm:79
#, c-format
msgid ""
"Enable/Disable name resolution spoofing protection.  If\n"
"\"%s\" is true, also reports to syslog."
msgstr ""

#: security/help.pm:80
#: standalone/draksec:213
#, c-format
msgid "Security Alerts:"
msgstr "安全警示："

#: security/help.pm:82
#, c-format
msgid "Enable/Disable IP spoofing protection."
msgstr ""

#: security/help.pm:84
#, c-format
msgid "Enable/Disable libsafe if libsafe is found on the system."
msgstr ""

#: security/help.pm:86
#, c-format
msgid "Enable/Disable the logging of IPv4 strange packets."
msgstr ""

#: security/help.pm:88
#, c-format
msgid "Enable/Disable msec hourly security check."
msgstr ""

#: security/help.pm:90
#, c-format
msgid " Enabling su only from members of the wheel group or allow su from any user."
msgstr ""

#: security/help.pm:92
#, c-format
msgid "Use password to authenticate users."
msgstr ""

#: security/help.pm:94
#, c-format
msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""

#: security/help.pm:96
#, c-format
msgid " Activate/Disable daily security check."
msgstr ""

#: security/help.pm:98
#, c-format
msgid " Enable/Disable sulogin(8) in single user level."
msgstr ""

#: security/help.pm:100
#, c-format
msgid "Add the name as an exception to the handling of password aging by msec."
msgstr ""

#: security/help.pm:102
#, c-format
msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""

#: security/help.pm:104
#, c-format
msgid "Set the password history length to prevent password reuse."
msgstr ""

#: security/help.pm:106
#, c-format
msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters."
msgstr ""

#: security/help.pm:108
#, fuzzy, c-format
msgid "Set the root umask."
msgstr "沒有密碼"

#: security/help.pm:109
#, c-format
msgid "if set to yes, check open ports."
msgstr ""

#: security/help.pm:110
#, c-format
msgid ""
"if set to yes, check for:\n"
"\n"
"- empty passwords,\n"
"\n"
"- no password in /etc/shadow\n"
"\n"
"- for users with the 0 id other than root."
msgstr ""

#: security/help.pm:117
#, c-format
msgid "if set to yes, check permissions of files in the users' home."
msgstr ""

#: security/help.pm:118
#, c-format
msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""

#: security/help.pm:119
#, c-format
msgid "if set to yes, run the daily security checks."
msgstr ""

#: security/help.pm:120
#, c-format
msgid "if set to yes, check additions/removals of sgid files."
msgstr ""

#: security/help.pm:121
#, c-format
msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""

#: security/help.pm:122
#, c-format
msgid "if set to yes, verify checksum of the suid/sgid files."
msgstr ""

#: security/help.pm:123
#, c-format
msgid "if set to yes, check additions/removals of suid root files."
msgstr ""

#: security/help.pm:124
#, c-format
msgid "if set to yes, report unowned files."
msgstr ""

#: security/help.pm:125
#, c-format
msgid "if set to yes, check files/directories writable by everybody."
msgstr ""

#: security/help.pm:126
#, c-format
msgid "if set to yes, run chkrootkit checks."
msgstr ""

#: security/help.pm:127
#, c-format
msgid "if set, send the mail report to this email address else send it to root."
msgstr ""

#: security/help.pm:128
#, c-format
msgid "if set to yes, report check result by mail."
msgstr ""

#: security/help.pm:129
#, c-format
msgid "Do not send mails if there's nothing to warn about"
msgstr ""

#: security/help.pm:130
#, c-format
msgid "if set to yes, run some checks against the rpm database."
msgstr ""

#: security/help.pm:131
#, c-format
msgid "if set to yes, report check result to syslog."
msgstr ""

#: security/help.pm:132
#, c-format
msgid "if set to yes, reports check result to tty."
msgstr ""

#: security/help.pm:134
#, c-format
msgid "Set shell commands history size. A value of -1 means unlimited."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""

#: security/help.pm:136
#, c-format
msgid "Timeout unit is second"
msgstr ""

#: security/help.pm:138
#, fuzzy, c-format
msgid "Set the user umask."
msgstr "使用者"

#: security/l10n.pm:11
#, c-format
msgid "Accept bogus IPv4 error messages"
msgstr ""

#: security/l10n.pm:12
#, c-format
msgid "Accept broadcasted icmp echo"
msgstr ""

#: security/l10n.pm:13
#, c-format
msgid "Accept icmp echo"
msgstr ""

#: security/l10n.pm:15
#, c-format
msgid "/etc/issue* exist"
msgstr ""

#: security/l10n.pm:16
#, c-format
msgid "Reboot by the console user"
msgstr ""

#: security/l10n.pm:17
#, fuzzy, c-format
msgid "Allow remote root login"
msgstr "(位於這個機器上)"

#: security/l10n.pm:18
#, c-format
msgid "Direct root login"
msgstr ""

#: security/l10n.pm:19
#, c-format
msgid "List users on display managers (kdm and gdm)"
msgstr ""

#: security/l10n.pm:20
#, c-format
msgid "Export display when passing from root to the other users"
msgstr ""

#: security/l10n.pm:21
#, fuzzy, c-format
msgid "Allow X Window connections"
msgstr "一般 modem 連線方式"

#: security/l10n.pm:22
#, c-format
msgid "Authorize TCP connections to X Window"
msgstr ""

#: security/l10n.pm:23
#, c-format
msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""

#: security/l10n.pm:24
#, fuzzy, c-format
msgid "Chkconfig obey msec rules"
msgstr "設定系統服務"

#: security/l10n.pm:25
#, c-format
msgid "Enable \"crontab\" and \"at\" for users"
msgstr ""

#: security/l10n.pm:26
#, c-format
msgid "Syslog reports to console 12"
msgstr ""

#: security/l10n.pm:27
#, c-format
msgid "Name resolution spoofing protection"
msgstr ""

#: security/l10n.pm:28
#, c-format
msgid "Enable IP spoofing protection"
msgstr ""

#: security/l10n.pm:29
#, c-format
msgid "Enable libsafe if libsafe is found on the system"
msgstr ""

#: security/l10n.pm:30
#, c-format
msgid "Enable the logging of IPv4 strange packets"
msgstr ""

#: security/l10n.pm:31
#, c-format
msgid "Enable msec hourly security check"
msgstr ""

#: security/l10n.pm:32
#, c-format
msgid "Enable su only from the wheel group members or for any user"
msgstr ""

#: security/l10n.pm:33
#, c-format
msgid "Use password to authenticate users"
msgstr ""

#: security/l10n.pm:34
#, c-format
msgid "Ethernet cards promiscuity check"
msgstr ""

#: security/l10n.pm:35
#, c-format
msgid "Daily security check"
msgstr "每日安全檢查"

#: security/l10n.pm:36
#, c-format
msgid "Sulogin(8) in single user level"
msgstr ""

#: security/l10n.pm:37
#, fuzzy, c-format
msgid "No password aging for"
msgstr "沒有密碼"

#: security/l10n.pm:38
#, c-format
msgid "Set password expiration and account inactivation delays"
msgstr ""

#: security/l10n.pm:39
#, fuzzy, c-format
msgid "Password history length"
msgstr "輸入的密碼太簡單了"

#: security/l10n.pm:40
#, c-format
msgid "Password minimum length and number of digits and upcase letters"
msgstr ""

#: security/l10n.pm:41
#, fuzzy, c-format
msgid "Root umask"
msgstr "沒有密碼"

#: security/l10n.pm:42
#, c-format
msgid "Shell history size"
msgstr ""

#: security/l10n.pm:43
#, fuzzy, c-format
msgid "Shell timeout"
msgstr "核心啟動時間逾時時間"

#: security/l10n.pm:44
#, fuzzy, c-format
msgid "User umask"
msgstr "使用者"

#: security/l10n.pm:45
#, fuzzy, c-format
msgid "Check open ports"
msgstr "於 port %s 偵測到"

#: security/l10n.pm:46
#, c-format
msgid "Check for unsecured accounts"
msgstr ""

#: security/l10n.pm:47
#, c-format
msgid "Check permissions of files in the users' home"
msgstr ""

#: security/l10n.pm:48
#, c-format
msgid "Check if the network devices are in promiscuous mode"
msgstr ""

#: security/l10n.pm:49
#, c-format
msgid "Run the daily security checks"
msgstr ""

#: security/l10n.pm:50
#, c-format
msgid "Check additions/removals of sgid files"
msgstr ""

#: security/l10n.pm:51
#, c-format
msgid "Check empty password in /etc/shadow"
msgstr ""

#: security/l10n.pm:52
#, c-format
msgid "Verify checksum of the suid/sgid files"
msgstr ""

#: security/l10n.pm:53
#, c-format
msgid "Check additions/removals of suid root files"
msgstr ""

#: security/l10n.pm:54
#, c-format
msgid "Report unowned files"
msgstr ""

#: security/l10n.pm:55
#, c-format
msgid "Check files/directories writable by everybody"
msgstr ""

#: security/l10n.pm:56
#, c-format
msgid "Run chkrootkit checks"
msgstr ""

#: security/l10n.pm:57
#, c-format
msgid "Do not send mails when unneeded"
msgstr ""

#: security/l10n.pm:58
#, c-format
msgid "If set, send the mail report to this email address else send it to root"
msgstr ""

#: security/l10n.pm:59
#, c-format
msgid "Report check result by mail"
msgstr ""

#: security/l10n.pm:60
#, c-format
msgid "Run some checks against the rpm database"
msgstr ""

#: security/l10n.pm:61
#, c-format
msgid "Report check result to syslog"
msgstr ""

#: security/l10n.pm:62
#, c-format
msgid "Reports check result to tty"
msgstr ""

#: security/level.pm:10
#, c-format
msgid "Welcome To Crackers"
msgstr "劣"

#: security/level.pm:11
#, c-format
msgid "Poor"
msgstr "差"

#: security/level.pm:13
#, c-format
msgid "High"
msgstr "高"

#: security/level.pm:14
#, c-format
msgid "Higher"
msgstr "較高"

#: security/level.pm:15
#, c-format
msgid "Paranoid"
msgstr "嚴密"

#: security/level.pm:41
#, c-format
msgid ""
"This level is to be used with care. It makes your system more easy to use,\n"
"but very sensitive. It must not be used for a machine connected to others\n"
"or to the Internet. There is no password access."
msgstr ""
"把安全機制設定在這個等級時必須要非常謹慎, \n"
"它會讓您的系統用起來更加簡易方便, 可是卻極易\n"
"受到破壞: 這個設定不應該被用在有連線到Internet\n"
"的主機, 因為所有的存取動作都沒有用密碼加以\n"
"限制。"

#: security/level.pm:44
#, c-format
msgid "Passwords are now enabled, but use as a networked computer is still not recommended."
msgstr "已啟動密碼認證功能, 但仍然不建議將此系統運作於網路上網路環境。"

#: security/level.pm:45
#, c-format
msgid "This is the standard security recommended for a computer that will be used to connect to the Internet as a client."
msgstr "標準的系統安全性設定, 建議用在有對外連線的主機上使用。"

#: security/level.pm:46
#, c-format
msgid "There are already some restrictions, and more automatic checks are run every night."
msgstr "包含了相關存取限制, 以及每日定期系統稽核檢查動作。"

#: security/level.pm:47
#, c-format
msgid ""
"With this security level, the use of this system as a server becomes possible.\n"
"The security is now high enough to use the system as a server which can accept\n"
"connections from many clients. Note: if your machine is only a client on the Internet, you should choose a lower level."
msgstr "高度的安全性相關的檢查與設定, 適合提供在架設對外服務的伺服器使用。"

#: security/level.pm:50
#, c-format
msgid "This is similar to the previous level, but the system is entirely closed and security features are at their maximum."
msgstr "與上一個模式相同, 不過整個系統幾乎都是封閉的。系統整個安全設定機制都是在最嚴密的狀態。"

#: security/level.pm:55
#, c-format
msgid "DrakSec Basic Options"
msgstr "DrakSec 基本參數選項"

#: security/level.pm:56
#, c-format
msgid "Please choose the desired security level"
msgstr "請選擇您希望的安全等級"

#: security/level.pm:60
#, c-format
msgid "Security level"
msgstr "安全等級"

#: security/level.pm:62
#, c-format
msgid "Use libsafe for servers"
msgstr "啟用「libsafe」防護功能"

#: security/level.pm:63
#, c-format
msgid "A library which defends against buffer overflow and format string attacks."
msgstr "能夠偵測防禦緩衝區溢位與格式化字串這類攻擊的程式庫套件。"

#: security/level.pm:64
#, c-format
msgid "Security Administrator (login or email)"
msgstr "安全性管理者 (login 或是 email)"

#: services.pm:19
#, c-format
msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
msgstr "啟動 ALSA (Advanced Linux Sound Architecture) 音效系統"

#: services.pm:20
#, c-format
msgid "Anacron is a periodic command scheduler."
msgstr "提供週期性的命令排程程式"

#: services.pm:21
#, c-format
msgid ""
"apmd is used for monitoring battery status and logging it via syslog.\n"
"It can also be used for shutting down the machine when the battery is low."
msgstr ""
"apmd 被用來監督電池狀態, 以及呼叫 syslog 紀錄相關狀態.\n"
"它也被用來自動呼叫關機程式進行關機動作, 當電池電源不夠時."

#: services.pm:23
#, c-format
msgid ""
"Runs commands scheduled by the at command at the time specified when\n"
"at was run, and runs batch commands when the load average is low enough."
msgstr "atd 服務程式, 能夠讓您在在命令列指定某個時間執行某個程式。"

#: services.pm:25
#, c-format
msgid ""
"cron is a standard UNIX program that runs user-specified programs\n"
"at periodic scheduled times. vixie cron adds a number of features to the basic\n"
"UNIX cron, including better security and more powerful configuration options."
msgstr ""
"cron 是個標準 unix 系統程式, 能夠提供使用者定期執行特定程式。\n"
"vixie 版本的 cron 增加了許多功能, \n"
"在安全性與設定方面能夠更彈性好用。"

#: services.pm:28
#, c-format
msgid ""
"FAM is a file monitoring daemon. It is used to get reports when files change.\n"
"It is used by GNOME and KDE"
msgstr ""

#: services.pm:30
#, c-format
msgid ""
"GPM adds mouse support to text-based Linux applications such the\n"
"Midnight Commander. It also allows mouse-based console cut-and-paste operations,\n"
"and includes support for pop-up menus on the console."
msgstr ""
"GPM 能夠讓系統在文字模式下驅動顯示出滑鼠游標, 能夠在 Midnight Commander\n"
"這類程式中所使用。另外還能夠支援在文字模式下螢幕文字的剪貼複製功能。"

#: services.pm:33
#, c-format
msgid ""
"HardDrake runs a hardware probe, and optionally configures\n"
"new/changed hardware."
msgstr ""
"HardDrake 程式會進行硬體偵測動作, 以便於設定新加入或者是有變更過\n"
"的週邊裝置。"

#: services.pm:35
#, c-format
msgid "Apache is a World Wide Web server. It is used to serve HTML files and CGI."
msgstr "Apache 是一個提供 Web 服務的程式, 提供架設 Web Server 讓使用者瀏覽。"

#: services.pm:36
#, c-format
msgid ""
"The internet superserver daemon (commonly called inetd) starts a\n"
"variety of other internet services as needed. It is responsible for starting\n"
"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd disables\n"
"all of the services it is responsible for."
msgstr ""
"internet superserver daemon (一般稱呼為 inetd), 它代為像是 telnet、ftp,\n"
"rsh、rlogin 等等這類服務的監聽, 然後有連線請求時, 在實際呼叫提供服務的\n"
"程式進行後續交談溝通的動作。關閉這個項目, 仰賴於這個服務代為監聽啟動的\n"
"項目將會無法使用"

#: services.pm:40
#, c-format
msgid ""
"Launch packet filtering for Linux kernel 2.2 series, to set\n"
"up a firewall to protect your machine from network attacks."
msgstr ""
"啟動 Linux Kernel 2.2 系列的防火牆機制, 用來保護您的機器不會遭受\n"
"外來的網路攻擊。"

#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
"You should leave this enabled for most machines."
msgstr ""
"這個服務項目將會載入\n"
"/etc/sysconfig/keyboard\n"
"檔案的鍵盤對應設定組態。\n"
"您可以事後使用 kdbconfig 程式來設定。\n"
"一般來說, 目前大部分機器並不需要這個項目。"

#: services.pm:45
#, c-format
msgid ""
"Automatic regeneration of kernel header in /boot for\n"
"/usr/include/linux/{autoconf,version}.h"
msgstr ""
"自動重新產生 kernel header 於 /boot 給\n"
"/usr/include/linux/{autoconf,version}.h"

#: services.pm:47
#, c-format
msgid "Automatic detection and configuration of hardware at boot."
msgstr "系統開機時能夠自動偵測週邊裝置的狀態並且設定。"

#: services.pm:48
#, c-format
msgid ""
"Linuxconf will sometimes arrange to perform various tasks\n"
"at boot-time to maintain the system configuration."
msgstr "Linuxconf 程式會在開機時偵測一些項目, 調整維護系統一些組態設定。"

#: services.pm:50
#, c-format
msgid ""
"lpd is the print daemon required for lpr to work properly. It is\n"
"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
"lpd 服務程式是 lpr 程式運作上不可缺的程式。若是要架設列印服務伺服器\n"
"的話, lpd 是很常見的選擇。"

#: services.pm:52
#, c-format
msgid ""
"Linux Virtual Server, used to build a high-performance and highly\n"
"available server."
msgstr "Linux Virtual Server, 用來架設一個高效能與高效率的 LVS 伺服器。"

#: services.pm:54
#, c-format
msgid "named (BIND) is a Domain Name Server (DNS) that is used to resolve host names to IP addresses."
msgstr ""
"named (BIND) 適用來提供 Domain Name Server (DNS) 服務的程式, \n"
"用來解析主機名稱與 IP 對應的關係。"

#: services.pm:55
#, c-format
msgid ""
"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
"掛載與卸下所有網路檔案系統, 比方像是 網路檔案系統(NFS), SMB, \n"
"NCP (NetWare) 這類。"

#: services.pm:57
#, c-format
msgid ""
"Activates/Deactivates all network interfaces configured to start\n"
"at boot time."
msgstr "在系統開機時, 選擇啟動網路功能, 或者是關閉不啟動該服務。"

#: services.pm:59
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
"This service provides NFS server functionality, which is configured via the\n"
"/etc/exports file."
msgstr ""
"NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n"
"這個服務項目會依照系統的 /etc/exports 檔案設定來啟動 NFS 分享功能。"

#: services.pm:62
#, c-format
msgid ""
"NFS is a popular protocol for file sharing across TCP/IP\n"
"networks. This service provides NFS file locking functionality."
msgstr ""
"NFS 是一個常用的網路通訊協定, 能夠提供跨網路分享其他主機的檔案系統。\n"
"這個服務提供 NFS 檔案分享時的鎖定機制。"

#: services.pm:64
#, c-format
msgid ""
"Automatically switch on numlock key locker under console\n"
"and Xorg at boot."
msgstr ""
"自動開關 numlock key 鎖在開機時於 console\n"
"與 Xorg."

#: services.pm:66
#, c-format
msgid "Support the OKI 4w and compatible winprinters."
msgstr "支援 OKI 4w 以及 WindowsPrinter 印表機。"

#: services.pm:67
#, c-format
msgid ""
"PCMCIA support is usually to support things like ethernet and\n"
"modems in laptops.  It will not get started unless configured so it is safe to have\n"
"it installed on machines that do not need it."
msgstr ""
"PCMCIA 支援, 一般是用來讓筆記型電腦的網路卡、Modem 驅動所設計。\n"
"一般來說, 要額外設定好 PCMCIA 後才會真正啟動 PCMCIA 服務, 因此\n"
"就算是系統不需要這個功能, 預先啟動他也不會有任何影響。"

#: services.pm:70
#, c-format
msgid ""
"The portmapper manages RPC connections, which are used by\n"
"protocols such as NFS and NIS. The portmap server must be running on machines\n"
"which act as servers for protocols which make use of the RPC mechanism."
msgstr ""
"portmapper 程式管理了 RPC 連線, 一般用於 NFS 與 NIS 通訊協定內。\n"
"若是您系統要使用到 RPC 相關服務, 您就必須啟動它。"

#: services.pm:73
#, c-format
msgid "Postfix is a Mail Transport Agent, which is the program that moves mail from one machine to another."
msgstr "Postfix 是一個郵件傳送代理程式, 用來投遞信件提供 SMTP 服務。"

#: services.pm:74
#, c-format
msgid ""
"Saves and restores system entropy pool for higher quality random\n"
"number generation."
msgstr "儲存與回存高品質系統亂數產生器"

#: services.pm:76
#, fuzzy, c-format
msgid ""
"Assign raw devices to block devices (such as hard drive\n"
"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
"給 block 這類區塊裝置指派 raw 裝置 (就像是硬碟的分割區), \n"
"一般是給 oracle 這類特殊程式使用。"

#: services.pm:78
#, c-format
msgid ""
"The routed daemon allows for automatic IP router table updated via\n"
"the RIP protocol. While RIP is widely used on small networks, more complex\n"
"routing protocols are needed for complex networks."
msgstr ""
"routed 服務程式允許透過 RIP 通訊協定來更新路由表的資訊。\n"
"一般來說, RIP 是給小型網路用途使用。"

#: services.pm:81
#, c-format
msgid ""
"The rstat protocol allows users on a network to retrieve\n"
"performance metrics for any machine on that network."
msgstr ""
"rstat 通訊協定, 能夠讓位於網路上的使用者接收到網路上任何一台\n"
"主機的運作效能資訊。"

#: services.pm:83
#, c-format
msgid ""
"The rusers protocol allows users on a network to identify who is\n"
"logged in on other responding machines."
msgstr ""
"rusers 通訊協定, 能夠讓位於網路上的使用者得知那些使用者登入在那些\n"
"機器上"

#: services.pm:85
#, c-format
msgid ""
"The rwho protocol lets remote users get a list of all of the users\n"
"logged into a machine running the rwho daemon (similar to finger)."
msgstr ""
"rwho 通訊協定, 能夠讓遠端的使用者獲得該機器上所有登入在主機上的\n"
"使用找 (類似於 finger)。"

#: services.pm:87
#, c-format
msgid "Launch the sound system on your machine"
msgstr "在您的系統上啟動音效服務系統"

#: services.pm:88
#, c-format
msgid ""
"Syslog is the facility by which many daemons use to log messages\n"
"to various system log files.  It is a good idea to always run syslog."
msgstr ""
"syslog 服務程式能夠讓系統許多服務程式用紀錄檔案來回應系統\n"
"所發生一些事情。建議您一定要啟動 syslog 服務程式"

#: services.pm:90
#, c-format
msgid "Load the drivers for your usb devices."
msgstr "載入 usb 裝置所需要的驅動程式"

#: services.pm:91
#, c-format
msgid "Starts the X Font Server (this is mandatory for Xorg to run)."
msgstr "啟動 X Font Server (這是為了 Xorg 執行一定要的)."

#: services.pm:115
#: services.pm:157
#, c-format
msgid "Choose which services should be automatically started at boot time"
msgstr "選擇希望在下一次開機時啟動的服務程式項目"

#: services.pm:127
#, c-format
msgid "Printing"
msgstr "列印"

#: services.pm:128
#, c-format
msgid "Internet"
msgstr "Internet"

#: services.pm:131
#, c-format
msgid "File sharing"
msgstr "檔案分享"

#: services.pm:138
#, c-format
msgid "Remote Administration"
msgstr "遠端管理"

#: services.pm:146
#, c-format
msgid "Database Server"
msgstr "資料庫軟體"

#: services.pm:209
#, c-format
msgid "running"
msgstr "執行中"

#: services.pm:209
#, c-format
msgid "stopped"
msgstr "未啟動"

#: services.pm:213
#, c-format
msgid "Services and daemons"
msgstr "服務程式"

#: services.pm:219
#, c-format
msgid ""
"No additional information\n"
"about this service, sorry."
msgstr ""
"抱歉 ! 這個服務項目並沒有\n"
"額外的相關資訊。"

#: services.pm:224
#: ugtk2.pm:1010
#, c-format
msgid "Info"
msgstr "資訊"

#: services.pm:227
#, c-format
msgid "Start when requested"
msgstr "要求時啟動"

#: services.pm:227
#, c-format
msgid "On boot"
msgstr "開機自動載入"

#: services.pm:244
#, c-format
msgid "Start"
msgstr "啟動"

#: services.pm:244
#, c-format
msgid "Stop"
msgstr "停止"

#: share/advertising/01.pl:13
#, c-format
msgid "<b>What is Mandrakelinux?</b>"
msgstr "<b>Mandrakelinux 是什麼？</b>"

#: share/advertising/01.pl:15
#, c-format
msgid "Welcome to <b>Mandrakelinux</b>!"
msgstr "歡迎來到 <b>Mandrakelinux</b>!"

#: share/advertising/01.pl:17
#, c-format
msgid "Mandrakelinux is a <b>Linux distribution</b> that comprises the core of the system, called the <b>operating system</b> (based on the Linux kernel) together with <b>a lot of applications</b> meeting every need you could even think of."
msgstr ""

#: share/advertising/01.pl:19
#, c-format
msgid "Mandrakelinux is the most <b>user-friendly</b> Linux distribution today. It is also one of the <b>most widely used</b> Linux distributions worldwide!"
msgstr ""

#: share/advertising/02.pl:13
#, fuzzy, c-format
msgid "<b>Open Source</b>"
msgstr "<b>伺服器</b>"

#: share/advertising/02.pl:15
#, fuzzy, c-format
msgid "Welcome to the <b>world of open source</b>!"
msgstr "歡迎來到開放源碼的世界。"

#: share/advertising/02.pl:17
#, c-format
msgid "Mandrakelinux is committed to the open source model. This means that this new release is the result of <b>collaboration</b> between <b>Mandrakesoft's team of developers</b> and the <b>worldwide community</b> of Mandrakelinux contributors."
msgstr ""

#: share/advertising/02.pl:19
#, c-format
msgid "We would like to <b>thank</b> everyone who participated in the development of this latest release."
msgstr ""

#: share/advertising/03.pl:13
#, c-format
msgid "<b>The GPL</b>"
msgstr ""

#: share/advertising/03.pl:15
#, c-format
msgid "Most of the software included in the distribution and all of the Mandrakelinux tools are licensed under the <b>General Public License</b>."
msgstr ""

#: share/advertising/03.pl:17
#, c-format
msgid "The GPL is at the heart of the open source model; it grants everyone the <b>freedom</b> to use, study, distribute and improve the software any way they want, provided they make the results available."
msgstr ""

#: share/advertising/03.pl:19
#, c-format
msgid "The main benefit of this is that the number of developers is virtually <b>unlimited</b>, resulting in <b>very high quality</b> software."
msgstr ""

#: share/advertising/04.pl:13
#, c-format
msgid "<b>Join the Community</b>"
msgstr ""

#: share/advertising/04.pl:15
#, c-format
msgid "Mandrakelinux has one of the <b>biggest communities</b> of users and developers. The role of such a community is very wide, ranging from bug reporting to the development of new applications. The community plays a <b>key role</b> in the Mandrakelinux world."
msgstr ""

#: share/advertising/04.pl:17
#, c-format
msgid "To <b>learn more</b> about our dynamic community, please visit <b>www.mandrakelinux.com</b> or directly <b>www.mandrakelinux.com/en/cookerdevel.php3</b> if you would like to get <b>involved</b> in the development."
msgstr ""

#: share/advertising/05.pl:13
#, c-format
msgid "<b>Download Version</b>"
msgstr ""

#: share/advertising/05.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux Download</b>. This is the free version that Mandrakesoft wants to keep <b>available to everyone</b>."
msgstr ""

#: share/advertising/05.pl:17
#, c-format
msgid "The Download version <b>cannot include</b> all the software that is not open source. Therefore, you will not find in the Download version:"
msgstr ""

#: share/advertising/05.pl:18
#, c-format
msgid "\t* <b>Proprietary drivers</b> (such as drivers for NVIDIA®, ATI™, etc.)."
msgstr ""

#: share/advertising/05.pl:19
#, c-format
msgid "\t* <b>Proprietary software</b> (such as Acrobat® Reader®, RealPlayer®, Flash™, etc.)."
msgstr ""

#: share/advertising/05.pl:21
#, c-format
msgid "You will not have access to the <b>services included</b> in the other Mandrakesoft products either."
msgstr ""

#: share/advertising/06.pl:13
#, c-format
msgid "<b>Discovery, Your First Linux Desktop</b>"
msgstr ""

#: share/advertising/06.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux Discovery</b>."
msgstr ""

#: share/advertising/06.pl:17
#, c-format
msgid "Discovery is the <b>easiest</b> and most <b>user-friendly</b> Linux distribution. It includes a hand-picked selection of <b>premium software</b> for office, multimedia and Internet activities. Its menu is task-oriented, with a single application per task."
msgstr ""

#: share/advertising/07.pl:13
#, c-format
msgid "<b>PowerPack, The Ultimate Linux Desktop</b>"
msgstr ""

#: share/advertising/07.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack</b>."
msgstr ""

#: share/advertising/07.pl:17
#, c-format
msgid "PowerPack is Mandrakesoft's <b>premier Linux desktop</b> product. PowerPack includes <b>thousands of applications</b> - everything from the most popular to the most advanced."
msgstr ""

#: share/advertising/08.pl:13
#, c-format
msgid "<b>PowerPack+, The Linux Solution for Desktops and Servers</b>"
msgstr ""

#: share/advertising/08.pl:15
#, c-format
msgid "You are now installing <b>Mandrakelinux PowerPack+</b>."
msgstr ""

#: share/advertising/08.pl:17
#, c-format
msgid "PowerPack+ is a <b>full-featured Linux solution</b> for small to medium-sized <b>networks</b>. PowerPack+ includes thousands of <b>desktop applications</b> and a comprehensive selection of world-class <b>server applications</b>."
msgstr ""

#: share/advertising/09.pl:13
#, fuzzy, c-format
msgid "<b>Mandrakesoft Products</b>"
msgstr "Mandrakelinux 控制中心"

#: share/advertising/09.pl:15
#, c-format
msgid "<b>Mandrakesoft</b> has developed a wide range of <b>Mandrakelinux</b> products."
msgstr ""

#: share/advertising/09.pl:17
#, c-format
msgid "The Mandrakelinux 10.1 products are:"
msgstr ""

#: share/advertising/09.pl:18
#, c-format
msgid "\t* <b>Discovery</b>, Your First Linux Desktop."
msgstr ""

#: share/advertising/09.pl:19
#, c-format
msgid "\t* <b>PowerPack</b>, The Ultimate Linux Desktop."
msgstr ""

#: share/advertising/09.pl:20
#, c-format
msgid "\t* <b>PowerPack+</b>, The Linux Solution for Desktops and Servers."
msgstr ""

#: share/advertising/09.pl:21
#, c-format
msgid "\t* <b>Mandrakelinux 10.1 for x86-64</b>, The Mandrakelinux solution for making the most of your 64-bit processor."
msgstr ""

#: share/advertising/10.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Nomad Products)</b>"
msgstr ""

#: share/advertising/10.pl:15
#, c-format
msgid "Mandrakesoft has developed two products that allow you to use Mandrakelinux <b>on any computer</b> and without any need to actually install it:"
msgstr ""

#: share/advertising/10.pl:16
#, c-format
msgid "\t* <b>Move</b>, a Mandrakelinux distribution that runs entirely from a bootable CD-ROM."
msgstr ""

#: share/advertising/10.pl:17
#, c-format
msgid "\t* <b>GlobeTrotter</b>, a Mandrakelinux distribution pre-installed on the ultra-compact “LaCie Mobile Hard Drive”."
msgstr ""

#: share/advertising/11.pl:13
#, c-format
msgid "<b>Mandrakesoft Products (Professional Solutions)</b>"
msgstr ""

#: share/advertising/11.pl:15
#, c-format
msgid "Below are the Mandrakesoft products designed to meet the <b>professional needs</b>:"
msgstr ""

#: share/advertising/11.pl:16
#, c-format
msgid "\t* <b>Corporate Desktop</b>, The Mandrakelinux Desktop for Businesses."
msgstr ""

#: share/advertising/11.pl:17
#, c-format
msgid "\t* <b>Corporate Server</b>, The Mandrakelinux Server Solution."
msgstr ""

#: share/advertising/11.pl:18
#, c-format
msgid "\t* <b>Multi-Network Firewall</b>, The Mandrakelinux Security Solution."
msgstr ""

#: share/advertising/12.pl:13
#, c-format
msgid "<b>The KDE Choice</b>"
msgstr ""

#: share/advertising/12.pl:15
#, c-format
msgid "With your Discovery, you will be introduced to <b>KDE</b>, the most advanced and user-friendly <b>graphical desktop environment</b> available."
msgstr ""

#: share/advertising/12.pl:17
#, c-format
msgid "KDE will make your <b>first steps</b> with Linux so <b>easy</b> that you will not ever think of running another operating system!"
msgstr ""

#: share/advertising/12.pl:19
#, c-format
msgid "KDE also includes a lot of <b>well integrated applications</b> such as Konqueror, the web browser and Kontact, the personal information manager."
msgstr ""

#: share/advertising/13-a.pl:13
#: share/advertising/13-b.pl:13
#, fuzzy, c-format
msgid "<b>Choose your Favorite Desktop Environment</b>"
msgstr "選擇您檔案系統所使用的加密金鑰"

#: share/advertising/13-a.pl:15
#, c-format
msgid "With PowerPack, you will have the choice of the <b>graphical desktop environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/13-a.pl:17
#: share/advertising/13-b.pl:17
#, c-format
msgid "KDE is one of the <b>most advanced</b> and <b>user-friendly</b> graphical desktop environment available. It includes a lot of integrated applications."
msgstr ""

#: share/advertising/13-a.pl:19
#: share/advertising/13-b.pl:19
#, c-format
msgid "But we advise you to try all available ones (including <b>GNOME</b>, <b>IceWM</b>, etc.) and pick your favorite."
msgstr ""

#: share/advertising/13-b.pl:15
#, c-format
msgid "With PowerPack+, you will have the choice of the <b>graphical desktop environment</b>. Mandrakesoft has chosen <b>KDE</b> as the default one."
msgstr ""

#: share/advertising/14.pl:13
#, fuzzy, c-format
msgid "<b>OpenOffice.org</b>"
msgstr "OpenOffice.org Math"

#: share/advertising/14.pl:15
#, c-format
msgid "With Discovery, you will discover <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/14.pl:17
#, c-format
msgid "It is a <b>full-featured office suite</b> that includes word processor, spreadsheet, presentation and drawing applications."
msgstr ""

#: share/advertising/14.pl:19
#, c-format
msgid "OpenOffice.org can read and write most types of <b>Microsoft® Office</b> documents such as Word, Excel and PowerPoint® files."
msgstr ""

#: share/advertising/15.pl:13
#, fuzzy, c-format
msgid "<b>Kontact</b>"
msgstr "<b>Mandrakeclub</b>"

#: share/advertising/15.pl:15
#, c-format
msgid "Discovery includes <b>Kontact</b>, the new KDE <b>groupware solution</b>."
msgstr ""

#: share/advertising/15.pl:17
#, c-format
msgid "More than just a full-featured <b>e-mail client</b>, Kontact also includes an <b>address book</b>, a <b>calendar</b>, plus a tool for taking <b>notes</b>!"
msgstr ""

#: share/advertising/15.pl:19
#, c-format
msgid "It is the easiest way to communicate with your contacts and to organize your time."
msgstr ""

#: share/advertising/16.pl:13
#, c-format
msgid "<b>Surf the Internet</b>"
msgstr "<b>漫遊瀏覽網際網路</b>"

#: share/advertising/16.pl:15
#, c-format
msgid "Discovery will give you access to <b>every Internet resource</b>:"
msgstr ""

#: share/advertising/16.pl:16
#, c-format
msgid "\t* Browse the <b>Web</b> with Konqueror."
msgstr ""

#: share/advertising/16.pl:17
#, c-format
msgid "\t* <b>Chat</b> online with your friends using Kopete."
msgstr ""

#: share/advertising/16.pl:18
#, fuzzy, c-format
msgid "\t* <b>Transfer</b> files with KBear."
msgstr "以 FTP 傳輸檔案"

#: share/advertising/16.pl:19
#: share/advertising/17.pl:19
#: share/advertising/18.pl:22
#, c-format
msgid "\t* ..."
msgstr ""

#: share/advertising/17.pl:13
#, c-format
msgid "<b>Enjoy our Multimedia Features</b>"
msgstr ""

#: share/advertising/17.pl:15
#, c-format
msgid "Discovery will also make <b>multimedia</b> very easy for you:"
msgstr ""

#: share/advertising/17.pl:16
#, c-format
msgid "\t* Watch your favorite <b>videos</b> with Kaffeine."
msgstr ""

#: share/advertising/17.pl:17
#, c-format
msgid "\t* Listen to your <b>music files</b> with amaroK."
msgstr ""

#: share/advertising/17.pl:18
#, c-format
msgid "\t* Edit and create <b>images</b> with the GIMP."
msgstr ""

#: share/advertising/18.pl:13
#, c-format
msgid "<b>Enjoy the Wide Range of Applications</b>"
msgstr ""

#: share/advertising/18.pl:15
#, c-format
msgid "In the Mandrakelinux menu you will find <b>easy-to-use</b> applications for <b>all of your tasks</b>:"
msgstr ""

#: share/advertising/18.pl:16
#, c-format
msgid "\t* Create, edit and share office documents with <b>OpenOffice.org</b>."
msgstr ""

#: share/advertising/18.pl:17
#, c-format
msgid "\t* Manage your personal data with the integrated personal information suites <b>Kontact</b> and <b>Evolution</b>."
msgstr ""

#: share/advertising/18.pl:18
#, c-format
msgid "\t* Browse the web with <b>Mozilla</b> and <b>Konqueror</b>."
msgstr ""

#: share/advertising/18.pl:19
#, c-format
msgid "\t* Participate in online chat with <b>Kopete</b>."
msgstr ""

#: share/advertising/18.pl:20
#, c-format
msgid "\t* Listen to your <b>audio CDs</b> and <b>music files</b>, watch your <b>videos</b>."
msgstr ""

#: share/advertising/18.pl:21
#, c-format
msgid "\t* Edit and create images with the <b>GIMP</b>."
msgstr ""

#: share/advertising/19.pl:13
#, c-format
msgid "<b>Development Environments</b>"
msgstr "<b>開發環境</b>"

#: share/advertising/19.pl:15
#: share/advertising/22.pl:15
#, c-format
msgid "PowerPack gives you the best tools to <b>develop</b> your own applications."
msgstr ""

#: share/advertising/19.pl:17
#, c-format
msgid "You will enjoy the powerful, integrated development environment from KDE, <b>KDevelop</b>, which will let you program in a lot of languages."
msgstr ""

#: share/advertising/19.pl:19
#, c-format
msgid "PowerPack also ships with <b>GCC</b>, the leading Linux compiler and <b>GDB</b>, the associated debugger."
msgstr ""

#: share/advertising/20.pl:13
#, fuzzy, c-format
msgid "<b>Development Editors</b>"
msgstr "程式開發平台"

#: share/advertising/20.pl:15
#, c-format
msgid "PowerPack will let you choose between those <b>popular editors</b>:"
msgstr ""

#: share/advertising/20.pl:16
#, c-format
msgid "\t* <b>Emacs</b>: a customizable and real time display editor."
msgstr ""

#: share/advertising/20.pl:17
#, c-format
msgid "\t* <b>XEmacs</b>: another open source text editor and application development system."
msgstr ""

#: share/advertising/20.pl:18
#, c-format
msgid "\t* <b>Vim</b>: an advanced text editor with more features than standard Vi."
msgstr ""

#: share/advertising/21.pl:13
#, fuzzy, c-format
msgid "<b>Development Languages</b>"
msgstr "程式開發平台"

#: share/advertising/21.pl:15
#, c-format
msgid "With all these <b>powerful tools</b>, you will be able to write applications in <b>dozens of programming languages</b>:"
msgstr ""

#: share/advertising/21.pl:16
#, c-format
msgid "\t* The famous <b>C language</b>."
msgstr ""

#: share/advertising/21.pl:17
#, c-format
msgid "\t* Object oriented languages:"
msgstr ""

#: share/advertising/21.pl:18
#, c-format
msgid "\t\t* <b>C++</b>"
msgstr "\t\t* <b>C++</b>"

#: share/advertising/21.pl:19
#, c-format
msgid "\t\t* <b>Java™</b>"
msgstr "\t\t* <b>Java™</b>"

#: share/advertising/21.pl:20
#, fuzzy, c-format
msgid "\t* Scripting languages:"
msgstr "列印管理程式"

#: share/advertising/21.pl:21
#, c-format
msgid "\t\t* <b>Perl</b>"
msgstr "\t\t* <b>Perl</b>"

#: share/advertising/21.pl:22
#, c-format
msgid "\t\t* <b>Python</b>"
msgstr "\t\t* <b>Python</b>"

#: share/advertising/21.pl:23
#: share/advertising/28.pl:22
#, c-format
msgid "\t* And many more."
msgstr ""

#: share/advertising/22.pl:13
#, fuzzy, c-format
msgid "<b>Development Tools</b>"
msgstr "程式開發平台"

#: share/advertising/22.pl:17
#, c-format
msgid "With the powerful integrated development environment <b>KDevelop</b> and the leading Linux compiler <b>GCC</b>, you will be able to create applications in <b>many different languages</b> (C, C++, Java™, Perl, Python, etc.)."
msgstr ""

#: share/advertising/23.pl:13
#, fuzzy, c-format
msgid "<b>Groupware Server</b>"
msgstr "<b>伺服器</b>"

#: share/advertising/23.pl:15
#, c-format
msgid "PowerPack+ will give you access to <b>Kolab</b>, a full-featured <b>groupware server</b> which will, thanks to the client <b>Kontact</b>, allow you to:"
msgstr ""

#: share/advertising/23.pl:16
#, c-format
msgid "\t* Send and receive your <b>e-mails</b>."
msgstr ""

#: share/advertising/23.pl:17
#, c-format
msgid "\t* Share your <b>agendas</b> and your <b>address books</b>."
msgstr ""

#: share/advertising/23.pl:18
#, c-format
msgid "\t* Manage your <b>memos</b> and <b>task lists</b>."
msgstr ""

#: share/advertising/24.pl:13
#, c-format
msgid "<b>Servers</b>"
msgstr "<b>伺服器</b>"

#: share/advertising/24.pl:15
#, c-format
msgid "Empower your business network with <b>premier server solutions</b> including:"
msgstr ""

#: share/advertising/24.pl:16
#, c-format
msgid "\t* <b>Samba</b>: File and print services for Microsoft® Windows® clients."
msgstr ""

#: share/advertising/24.pl:17
#, fuzzy, c-format
msgid "\t* <b>Apache</b>: The most widely used web server."
msgstr "Apache WWW 伺服器"

#: share/advertising/24.pl:18
#, c-format
msgid "\t* <b>MySQL</b> and <b>PostgreSQL</b>: The world's most popular open source databases."
msgstr ""

#: share/advertising/24.pl:19
#, c-format
msgid "\t* <b>CVS</b>: Concurrent Versions System, the dominant open source network-transparent version control system."
msgstr ""

#: share/advertising/24.pl:20
#, c-format
msgid "\t* <b>ProFTPD</b>: The highly configurable GPL-licensed FTP server software."
msgstr ""

#: share/advertising/24.pl:21
#, c-format
msgid "\t* <b>Postfix</b> and <b>Sendmail</b>: The popular and powerful mail servers."
msgstr ""

#: share/advertising/25.pl:13
#, c-format
msgid "<b>Mandrakelinux Control Center</b>"
msgstr "<b>Mandrakelinux 控制中心</b>"

#: share/advertising/25.pl:15
#, c-format
msgid "The <b>Mandrakelinux Control Center</b> is an essential collection of Mandrakelinux-specific utilities designed to simplify the configuration of your computer."
msgstr ""

#: share/advertising/25.pl:17
#, c-format
msgid "You will immediately appreciate this collection of <b>more than 60</b> handy utilities for <b>easily configuring your system</b>: hardware devices, mount points, network and Internet, security level of your computer, etc."
msgstr ""

#: share/advertising/26.pl:13
#, c-format
msgid "<b>The Open Source Model</b>"
msgstr ""

#: share/advertising/26.pl:15
#, c-format
msgid "Like all computer programming, open source software <b>requires time and people</b> for development. In order to respect the open source philosophy, Mandrakesoft sells added value products and services to <b>keep improving Mandrakelinux</b>. If you want to <b>support the open source philosophy</b> and the development of Mandrakelinux, <b>please</b> consider buying one of our products or services!"
msgstr ""

#: share/advertising/27.pl:13
#, fuzzy, c-format
msgid "<b>Online Store</b>"
msgstr "Mandrakelinux 控制中心"

#: share/advertising/27.pl:15
#, c-format
msgid "To learn more about Mandrakesoft products and services, you can visit our <b>e-commerce platform</b>."
msgstr ""

#: share/advertising/27.pl:17
#, c-format
msgid "There you can find all our products, services and third-party products."
msgstr ""

#: share/advertising/27.pl:19
#, c-format
msgid "This platform has just been <b>redesigned</b> to improve its efficiency and usability."
msgstr ""

#: share/advertising/27.pl:21
#, c-format
msgid "Stop by today at <b>store.mandrakesoft.com</b>!"
msgstr ""

#: share/advertising/28.pl:13
#, c-format
msgid "<b>Mandrakeclub</b>"
msgstr "<b>Mandrakeclub</b>"

#: share/advertising/28.pl:15
#, c-format
msgid "<b>Mandrakeclub</b> is the <b>perfect companion</b> to your Mandrakelinux product.."
msgstr ""

#: share/advertising/28.pl:17
#, c-format
msgid "Take advantage of <b>valuable benefits</b> by joining Mandrakeclub, such as:"
msgstr ""

#: share/advertising/28.pl:18
#, c-format
msgid "\t* <b>Special discounts</b> on products and services of our online store <b>store.mandrakesoft.com</b>."
msgstr ""

#: share/advertising/28.pl:19
#, c-format
msgid "\t* Access to <b>commercial applications</b> (for example to NVIDIA® or ATI™ drivers)."
msgstr ""

#: share/advertising/28.pl:20
#, c-format
msgid "\t* Participation in Mandrakelinux <b>user forums</b>."
msgstr ""

#: share/advertising/28.pl:21
#, c-format
msgid "\t* <b>Early and privileged access</b>, before public release, to Mandrakelinux <b>ISO images</b>."
msgstr ""

#: share/advertising/29.pl:13
#, c-format
msgid "<b>Mandrakeonline</b>"
msgstr "<b>Mandrakeonline 線上服務</b>"

#: share/advertising/29.pl:15
#, c-format
msgid "<b>Mandrakeonline</b> is a new premium service that Mandrakesoft is proud to offer its customers!"
msgstr ""

#: share/advertising/29.pl:17
#, c-format
msgid "Mandrakeonline provides a wide range of valuable services for <b>easily updating</b> your Mandrakelinux systems:"
msgstr ""

#: share/advertising/29.pl:18
#, c-format
msgid "\t* <b>Perfect</b> system security (automated software updates)."
msgstr ""

#: share/advertising/29.pl:19
#, c-format
msgid "\t* <b>Notification</b> of updates (by e-mail or by an applet on the desktop)."
msgstr ""

#: share/advertising/29.pl:20
#, c-format
msgid "\t* Flexible <b>scheduled</b> updates."
msgstr ""

#: share/advertising/29.pl:21
#, c-format
msgid "\t* Management of <b>all your Mandrakelinux systems</b> with one account."
msgstr ""

#: share/advertising/30.pl:13
#, c-format
msgid "<b>Mandrakeexpert</b>"
msgstr "<b>Mandrakeexpert</b>"

#: share/advertising/30.pl:15
#, c-format
msgid "Do you require <b>assistance?</b> Meet Mandrakesoft's technical experts on <b>our technical support platform</b> www.mandrakeexpert.com."
msgstr ""

#: share/advertising/30.pl:17
#, c-format
msgid "Thanks to the help of <b>qualified Mandrakelinux experts</b>, you will save a lot of time."
msgstr ""

#: share/advertising/30.pl:19
#, c-format
msgid "For any question related to Mandrakelinux, you have the possibility to purchase support incidents at <b>store.mandrakesoft.com</b>."
msgstr ""

#: share/compssUsers.pl:25
#, c-format
msgid "Office Workstation"
msgstr "辦公軟體平台"

#: share/compssUsers.pl:27
#, c-format
msgid "Office programs: wordprocessors (OpenOffice.org Writer, Kword), spreadsheets (OpenOffice.org Calc, Kspread), PDF viewers, etc"
msgstr "辦公軟體： 文書處理軟體 (OpenOffice.org Writer、Kword), 試算表 (OpenOffice.org Calc、Kspread), pdf 閱讀程式等等"

#: share/compssUsers.pl:28
#, c-format
msgid "Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, gnumeric), pdf viewers, etc"
msgstr "辦公軟體： 文書處理軟體 (kword、abiword), 試算表 (kspread、gnumeric), pdf 閱讀程式等等"

#: share/compssUsers.pl:33
#, c-format
msgid "Game station"
msgstr "遊戲平台"

#: share/compssUsers.pl:34
#, c-format
msgid "Amusement programs: arcade, boards, strategy, etc"
msgstr "娛樂的一些程式： 紙牌、益智、動作、策略 等"

#: share/compssUsers.pl:37
#, c-format
msgid "Multimedia station"
msgstr "多媒體平台"

#: share/compssUsers.pl:38
#, c-format
msgid "Sound and video playing/editing programs"
msgstr "音效以及影像撥放編輯程式"

#: share/compssUsers.pl:43
#, c-format
msgid "Internet station"
msgstr "Internet 平台"

#: share/compssUsers.pl:44
#, fuzzy, c-format
msgid "Set of tools to read and send mail and news (mutt, tin..) and to browse the Web"
msgstr "包含讀信、寫信以及閱讀網路論壇的工具 (pine、mutt、tin ..) 與及 web 瀏覽工具"

#: share/compssUsers.pl:49
#, c-format
msgid "Network Computer (client)"
msgstr "用戶端網路環境"

#: share/compssUsers.pl:50
#, c-format
msgid "Clients for different protocols including ssh"
msgstr "包含 ssh 等其他不同通訊協定的用戶端程式"

#: share/compssUsers.pl:54
#, c-format
msgid "Configuration"
msgstr "組態設定"

#: share/compssUsers.pl:55
#, c-format
msgid "Tools to ease the configuration of your computer"
msgstr "讓您方便設定您系統的工具"

#: share/compssUsers.pl:59
#, c-format
msgid "Console Tools"
msgstr "Console 工具"

#: share/compssUsers.pl:60
#, c-format
msgid "Editors, shells, file tools, terminals"
msgstr "編輯器, shell, 檔案工具, 終端機"

#: share/compssUsers.pl:65
#: share/compssUsers.pl:165
#, c-format
msgid "C and C++ development libraries, programs and include files"
msgstr "C/C++ 發展環境, 包含編譯器、程式庫與及一些引入檔案"

#: share/compssUsers.pl:69
#: share/compssUsers.pl:169
#, c-format
msgid "Documentation"
msgstr "文件檔案"

#: share/compssUsers.pl:70
#: share/compssUsers.pl:170
#, c-format
msgid "Books and Howto's on Linux and Free Software"
msgstr "Linux 系統與一些免費軟體的書籍、HOWTO 文件"

#: share/compssUsers.pl:74
#: share/compssUsers.pl:173
#, c-format
msgid "LSB"
msgstr "LSB"

#: share/compssUsers.pl:75
#: share/compssUsers.pl:174
#, c-format
msgid "Linux Standard Base. Third party applications support"
msgstr "LSB 的支援, 包含第三類協力廠商軟體支援"

#: share/compssUsers.pl:85
#, c-format
msgid "Apache"
msgstr "Apache"

#: share/compssUsers.pl:88
#, fuzzy, c-format
msgid "Groupware"
msgstr "群組"

#: share/compssUsers.pl:89
#, c-format
msgid "Kolab Server"
msgstr "Kolab 伺服器"

#: share/compssUsers.pl:92
#: share/compssUsers.pl:133
#, c-format
msgid "Firewall/Router"
msgstr "防火牆/路由器"

#: share/compssUsers.pl:93
#: share/compssUsers.pl:134
#, c-format
msgid "Internet gateway"
msgstr "Internet 閘道器"

#: share/compssUsers.pl:96
#, fuzzy, c-format
msgid "Mail/News"
msgstr "/檔案 (F)/新增 (_N)"

#: share/compssUsers.pl:97
#, fuzzy, c-format
msgid "Postfix mail server, Inn news server"
msgstr "Postfix 郵件伺服器"

#: share/compssUsers.pl:100
#, fuzzy, c-format
msgid "Directory Server"
msgstr "使用光碟片回存"

#: share/compssUsers.pl:104
#, c-format
msgid "FTP Server"
msgstr "FTP 伺服器"

#: share/compssUsers.pl:105
#, c-format
msgid "ProFTPd"
msgstr ""

#: share/compssUsers.pl:108
#, c-format
msgid "DNS/NIS"
msgstr ""

#: share/compssUsers.pl:109
#, fuzzy, c-format
msgid "Domain Name and Network Information Server"
msgstr "網域名稱伺服器"

#: share/compssUsers.pl:112
#, fuzzy, c-format
msgid "File and Printer Sharing Server"
msgstr "列印伺服器名稱"

#: share/compssUsers.pl:113
#, fuzzy, c-format
msgid "NFS Server, Samba server"
msgstr "Samba 伺服器"

#: share/compssUsers.pl:116
#: share/compssUsers.pl:129
#, c-format
msgid "Database"
msgstr "資料庫軟體"

#: share/compssUsers.pl:117
#, fuzzy, c-format
msgid "PostgreSQL and MySQL Database Server"
msgstr "PostgreSQL、MySQL 資料庫"

#: share/compssUsers.pl:121
#, c-format
msgid "Web/FTP"
msgstr "Web/FTP"

#: share/compssUsers.pl:122
#, c-format
msgid "Apache, Pro-ftpd"
msgstr "Apache、ProFTPD"

#: share/compssUsers.pl:125
#, c-format
msgid "Mail"
msgstr "電郵"

#: share/compssUsers.pl:126
#, fuzzy, c-format
msgid "Postfix mail server"
msgstr "Postfix 郵件伺服器"

#: share/compssUsers.pl:130
#, c-format
msgid "PostgreSQL or MySQL database server"
msgstr "PostgreSQL、MySQL 資料庫"

#: share/compssUsers.pl:137
#, c-format
msgid "Network Computer server"
msgstr "網路伺服器"

#: share/compssUsers.pl:138
#, c-format
msgid "NFS server, SMB server, Proxy server, ssh server"
msgstr "NFS server、SMB server、Proxy server、Ssh server"

#: share/compssUsers.pl:146
#, c-format
msgid "KDE Workstation"
msgstr "KDE 環境"

#: share/compssUsers.pl:147
#, c-format
msgid "The K Desktop Environment, the basic graphical environment with a collection of accompanying tools"
msgstr "KDE 圖形桌面介面環境, 包含許多好用的圖型介面工具程式"

#: share/compssUsers.pl:151
#, c-format
msgid "GNOME Workstation"
msgstr "Gnome 環境"

#: share/compssUsers.pl:152
#, c-format
msgid "A graphical environment with user-friendly set of applications and desktop tools"
msgstr "包含友善的應用程式、桌面軟體的圖型化使用環境"

#: share/compssUsers.pl:155
#, c-format
msgid "Other Graphical Desktops"
msgstr "其他圖型桌面軟體"

#: share/compssUsers.pl:156
#, c-format
msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
msgstr "Icewm, Window Maker, Enlightenment, Fvwm, 等等管理程式"

#: share/compssUsers.pl:179
#, fuzzy, c-format
msgid "Utilities"
msgstr "Philippines"

#: share/compssUsers.pl:181
#: share/compssUsers.pl:182
#: standalone/logdrake:381
#, c-format
msgid "SSH Server"
msgstr "NIS 伺服主機"

#: share/compssUsers.pl:186
#, c-format
msgid "Webmin"
msgstr "Webmin"

#: share/compssUsers.pl:187
#, c-format
msgid "Webmin Remote Configuration Server"
msgstr "Webmin 遠端設定伺服器"

#: share/compssUsers.pl:191
#, c-format
msgid "Network Utilities/Monitoring"
msgstr "網路工具/監控"

#: share/compssUsers.pl:192
#, c-format
msgid "Monitoring tools, processes accounting, tcpdump, nmap, ..."
msgstr ""

#: share/compssUsers.pl:196
#, c-format
msgid "Mandrakesoft Wizards"
msgstr "Mandrakelinux 精靈"

#: share/compssUsers.pl:197
#, c-format
msgid "Wizards to configure server"
msgstr "用來設定伺服器的精靈"

#: share/compssUsers.pl.~1.8.~:196
#, c-format
msgid "MandrakeSoft Wizards"
msgstr ""

#: standalone.pm:21
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
"it under the terms of the GNU General Public License as published by\n"
"the Free Software Foundation; either version 2, or (at your option)\n"
"any later version.\n"
"\n"
"This program is distributed in the hope that it will be useful,\n"
"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
"GNU General Public License for more details.\n"
"\n"
"You should have received a copy of the GNU General Public License\n"
"along with this program; if not, write to the Free Software\n"
"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""

#: standalone.pm:40
#, c-format
msgid ""
"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
"Backup and Restore application\n"
"\n"
"--default             : save default directories.\n"
"--debug               : show all debug messages.\n"
"--show-conf           : list of files or directories to backup.\n"
"--config-info         : explain configuration file options (for non-X users).\n"
"--daemon              : use daemon configuration. \n"
"--help                : show this message.\n"
"--version             : show version number.\n"
msgstr ""

#: standalone.pm:52
#, c-format
msgid ""
"[--boot] [--splash]\n"
"OPTIONS:\n"
"  --boot            - enable to configure boot loader\n"
"  --splash          - enable to configure boot theme\n"
"default mode: offer to configure autologin feature"
msgstr ""

#: standalone.pm:57
#, c-format
msgid ""
"[OPTIONS] [PROGRAM_NAME]\n"
"\n"
"OPTIONS:\n"
"  --help            - print this help message.\n"
"  --report          - program should be one of mandrakelinux tools\n"
"  --incident        - program should be one of mandrakelinux tools"
msgstr ""

#: standalone.pm:63
#, c-format
msgid ""
"[--add]\n"
"  --add             - \"add a network interface\" wizard\n"
"  --del             - \"delete a network interface\" wizard\n"
"  --skip-wizard     - manage connections\n"
"  --internet        - configure internet\n"
"  --wizard          - like --add"
msgstr ""

#: standalone.pm:69
#, c-format
msgid ""
"\n"
"Font Importation and monitoring application\n"
"\n"
"OPTIONS:\n"
"--windows_import : import from all available windows partitions.\n"
"--xls_fonts      : show all fonts that already exist from xls\n"
"--install        : accept any font file and any directory.\n"
"--uninstall      : uninstall any font or any directory of font.\n"
"--replace        : replace all font if already exist\n"
"--application    : 0 none application.\n"
"                 : 1 all application available supported.\n"
"                 : name_of_application like  so for staroffice \n"
"                 : and gs for ghostscript for only this one."
msgstr ""

#: standalone.pm:84
#, c-format
msgid ""
"[OPTIONS]...\n"
"Mandrakelinux Terminal Server Configurator\n"
"--enable         : enable MTS\n"
"--disable        : disable MTS\n"
"--start          : start MTS\n"
"--stop           : stop MTS\n"
"--adduser        : add an existing system user to MTS (requires username)\n"
"--deluser        : delete an existing system user from MTS (requires username)\n"
"--addclient      : add a client machine to MTS (requires MAC address, IP, nbi image name)\n"
"--delclient      : delete a client machine from MTS (requires MAC address, IP, nbi image name)"
msgstr ""

#: standalone.pm:96
#, c-format
msgid "[keyboard]"
msgstr "[鍵盤]"

#: standalone.pm:97
#, c-format
msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
msgstr ""

#: standalone.pm:98
#, c-format
msgid ""
"[OPTIONS]\n"
"Network & Internet connection and monitoring application\n"
"\n"
"--defaultintf interface : show this interface by default\n"
"--connect : connect to internet if not already connected\n"
"--disconnect : disconnect to internet if already connected\n"
"--force : used with (dis)connect : force (dis)connection.\n"
"--status : returns 1 if connected 0 otherwise, then exit.\n"
"--quiet : do not be interactive. To be used with (dis)connect."
msgstr ""

#: standalone.pm:107
#, c-format
msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""

#: standalone.pm:108
#, c-format
msgid ""
"[OPTION]...\n"
"  --no-confirmation      do not ask first confirmation question in MandrakeUpdate mode\n"
"  --no-verify-rpm        do not verify packages signatures\n"
"  --changelog-first      display changelog before filelist in the description window\n"
"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
msgstr ""

#: standalone.pm:113
#, c-format
msgid "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-usbtable] [--dynamic=dev]"
msgstr ""

#: standalone.pm:114
#, c-format
msgid ""
" [everything]\n"
"       XFdrake [--noauto] monitor\n"
"       XFdrake resolution"
msgstr ""

#: standalone.pm:133
#, c-format
msgid ""
"\n"
"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--testing] [-v|--version] "
msgstr ""

#: standalone/XFdrake:61
#, fuzzy, c-format
msgid "You need to reboot for changes to take effect"
msgstr "您需要重新開機以便於讓異動的設定生效"

#: standalone/XFdrake:92
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"

#: standalone/XFdrake:96
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr ""

#: standalone/drakTermServ:74
#, c-format
msgid "Useless without Terminal Server"
msgstr ""

#: standalone/drakTermServ:106
#: standalone/drakTermServ:112
#, c-format
msgid "%s: %s requires a username...\n"
msgstr ""

#: standalone/drakTermServ:123
#, c-format
msgid "%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, 0/1 for Local Config...\n"
msgstr ""

#: standalone/drakTermServ:129
#, c-format
msgid "%s: %s requires hostname...\n"
msgstr ""

#: standalone/drakTermServ:211
#: standalone/drakTermServ:214
#, fuzzy, c-format
msgid "Terminal Server Configuration"
msgstr "Mandrake Terminal Server 設定"

#: standalone/drakTermServ:220
#, c-format
msgid "Enable Server"
msgstr "開啟服務"

#: standalone/drakTermServ:226
#, c-format
msgid "Disable Server"
msgstr "關閉服務"

#: standalone/drakTermServ:232
#, c-format
msgid "Start Server"
msgstr "啟動服務"

#: standalone/drakTermServ:238
#, c-format
msgid "Stop Server"
msgstr "停止服務"

#: standalone/drakTermServ:247
#, c-format
msgid "Etherboot Floppy/ISO"
msgstr "網路開機 Floppy/ISO"

#: standalone/drakTermServ:251
#, c-format
msgid "Net Boot Images"
msgstr "網路開機映像檔"

#: standalone/drakTermServ:258
#, c-format
msgid "Add/Del Users"
msgstr "新增/刪除使用者"

#: standalone/drakTermServ:262
#, c-format
msgid "Add/Del Clients"
msgstr "新增/刪除用戶端"

#: standalone/drakTermServ:270
#, c-format
msgid "Images"
msgstr "圖像"

#: standalone/drakTermServ:271
#, c-format
msgid "Clients/Users"
msgstr ""

#: standalone/drakTermServ:289
#: standalone/drakbug:47
#, c-format
msgid "First Time Wizard"
msgstr "首次巫師"

#: standalone/drakTermServ:325
#: standalone/drakTermServ:326
#, c-format
msgid "%s defined as dm, adding gdm user to /etc/passwd$$CLIENT$$"
msgstr ""

#: standalone/drakTermServ:332
#, c-format
msgid ""
"\n"
" This wizard routine will:\n"
" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
"\t2) Setup DHCP.\n"
"\t\n"
"After doing these steps, the wizard will:\n"
"\t\n"
"    a) Make all nbis.                                                                \n"
"    b) Activate the server.                                                          \n"
"    c) Start the server.                                                     \n"
"    d) Synchronize the shadow files so that all users, including root, \n"
"       are added to the shadow$$CLIENT$$ file.                                              \n"
"    e) Ask you to make a boot floppy.\n"
"    f) If it's thin clients, ask if you want to restart KDM.\n"
msgstr ""

#: standalone/drakTermServ:377
#, c-format
msgid "Cancel Wizard"
msgstr "取消精靈"

#: standalone/drakTermServ:392
#, c-format
msgid "Please save dhcpd config!"
msgstr ""

#: standalone/drakTermServ:420
#, fuzzy, c-format
msgid "Use thin clients."
msgstr "新增/刪除用戶端"

#: standalone/drakTermServ:422
#, c-format
msgid "Sync client X keyboard settings with server."
msgstr ""

#: standalone/drakTermServ:424
#, c-format
msgid ""
"Please select default client type.\n"
"    'Thin' clients run everything off the server's CPU/RAM, using the client display.\n"
"    'Fat' clients use their own CPU/RAM but the server's filesystem."
msgstr ""

#: standalone/drakTermServ:444
#, c-format
msgid "Creating net boot images for all kernels"
msgstr ""

#: standalone/drakTermServ:445
#: standalone/drakTermServ:747
#: standalone/drakTermServ:764
#, c-format
msgid "This will take a few minutes."
msgstr "這個過程將會需要花費一些時間。"

#: standalone/drakTermServ:449
#: standalone/drakTermServ:468
#, fuzzy, c-format
msgid "Done!"
msgstr "完成"

#: standalone/drakTermServ:454
#, c-format
msgid "Syncing server user list with client list, including root."
msgstr ""

#: standalone/drakTermServ:474
#, c-format
msgid "In order to enable changes made for thin clients, the display manager must be restarted. Restart now?"
msgstr ""

#: standalone/drakTermServ:509
#, fuzzy, c-format
msgid "Terminal Server Overview"
msgstr "Mandrake Terminal Server 設定"

#: standalone/drakTermServ:510
#, c-format
msgid ""
"        - Create Etherboot Enabled Boot Images:\n"
"        \tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
"        \tmkinitrd-net does much of this work and drakTermServ is just a graphical \n"
"        \tinterface to help manage/customize these images. To create the file \n"
"        \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
"        \tdhcpd.conf, you should create the etherboot images for at least one full kernel."
msgstr ""

#: standalone/drakTermServ:516
#, c-format
msgid ""
"        - Maintain /etc/dhcpd.conf:\n"
"        \tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP \n"
"        \taddress and net boot images to the machine. drakTermServ helps create/remove \n"
"        \tthese entries.\n"
"\t\t\t\n"
"        \t(PCI cards may omit the image - etherboot will request the correct image. \n"
"\t\t\tYou should also consider that when etherboot looks for the images, it expects \n"
"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
"\t\t\t \n"
"        \tA typical dhcpd.conf stanza to support a diskless client looks like:"
msgstr ""

#: standalone/drakTermServ:534
#, c-format
msgid ""
"        While you can use a pool of IP addresses, rather than setup a specific entry for\n"
"        a client machine, using a fixed address scheme facilitates using the functionality\n"
"        of client-specific configuration files that ClusterNFS provides.\n"
"\t\t\t\n"
"        Note: The '#type' entry is only used by drakTermServ.  Clients can either be 'thin'\n"
"        or 'fat'.  Thin clients run most software on the server via XDMCP, while fat clients run \n"
"        most software on the client machine. A special inittab, %s is\n"
"        written for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
"        modified if thin clients are used, to enable XDMCP. Since there are security issues in \n"
"        using XDMCP, hosts.deny and hosts.allow are modified to limit access to the local\n"
"        subnet.\n"
"\t\t\t\n"
"        Note: The '#hdw_config' entry is also only used by drakTermServ.  Clients can either \n"
"        be 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
"        hardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
"        by creating separate config files associated with the client's IP address and creating \n"
"        read/write mount points to allow the client to alter the file. Once you are satisfied \n"
"        with the configuration, you can remove root login privileges from the client.\n"
"\t\t\t\n"
"        Note: You must stop/start the server after adding or changing clients."
msgstr ""

#: standalone/drakTermServ:554
#, c-format
msgid ""
"        - Maintain /etc/exports:\n"
"        \tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
"        \tsets up the correct entry to allow anonymous access to the root filesystem from\n"
"        \tdiskless clients.\n"
"\n"
"        \tA typical exports entry for clusternfs is:\n"
"        \t\t\n"
"        \t/\t\t\t\t\t(ro,all_squash)\n"
"        \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
"\t\t\t\n"
"        \tWith SUBNET/MASK being defined for your network."
msgstr ""

#: standalone/drakTermServ:566
#, c-format
msgid ""
"        - Maintain %s:\n"
"        \tFor users to be able to log into the system from a diskless client, their entry in\n"
"        \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
"        \thelps in this respect by adding or removing system users from this file."
msgstr ""

#: standalone/drakTermServ:570
#, c-format
msgid ""
"        - Per client %s:\n"
"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
"        \tdrakTermServ will help create these files."
msgstr ""

#: standalone/drakTermServ:575
#, c-format
msgid ""
"        - Per client system configuration files:\n"
"        \tThrough clusternfs, each diskless client can have its own unique configuration files\n"
"        \ton the root filesystem of the server. By allowing local client hardware configuration, \n"
"        \tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
"        \t/etc/sysconfig/keyboard on a per-client basis.\n"
"\n"
"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
"        server on each client machine that has this feature enabled.  Local configuration can be\n"
"        turned back off, retaining the configuration files, once the client machine is configured."
msgstr ""

#: standalone/drakTermServ:584
#, c-format
msgid ""
"        - /etc/xinetd.d/tftp:\n"
"        \tdrakTermServ will configure this file to work in conjunction with the images created\n"
"        \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to \n"
"        \teach diskless client.\n"
"\n"
"        \tA typical TFTP configuration file looks like:\n"
"        \t\t\n"
"        \tservice tftp\n"
"\t\t\t{\n"
"                        disable         = no\n"
"                        socket_type  = dgram\n"
"                        protocol        = udp\n"
"                        wait             = yes\n"
"                        user             = root\n"
"                        server          = /usr/sbin/in.tftpd\n"
"                        server_args  = -s /var/lib/tftpboot\n"
"        \t}\n"
"        \t\t\n"
"        \tThe changes here from the default installation are changing the disable flag to\n"
"        \t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
"        \tputs its images."
msgstr ""

#: standalone/drakTermServ:605
#, c-format
msgid ""
"        - Create etherboot floppies/CDs:\n"
"        \tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
"        \tor CD to initiate the boot sequence.  drakTermServ will help generate these\n"
"        \timages, based on the NIC in the client machine.\n"
"        \t\t\n"
"        \tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
"        \t\t\n"
"        \tcat /usr/lib/etherboot/floppyload.bin \\\n"
"        \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
"        \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""

#: standalone/drakTermServ:640
#, c-format
msgid "Boot Floppy"
msgstr "開機片"

#: standalone/drakTermServ:642
#, c-format
msgid "Boot ISO"
msgstr "開機映像檔案"

#: standalone/drakTermServ:644
#, fuzzy, c-format
msgid "PXE Image"
msgstr "核心"

#: standalone/drakTermServ:712
#, fuzzy, c-format
msgid "Default kernel version"
msgstr "核心版本"

#: standalone/drakTermServ:715
#, c-format
msgid "Create PXE images."
msgstr ""

#: standalone/drakTermServ:745
#, c-format
msgid "Build Whole Kernel -->"
msgstr "建立整個核心 -->"

#: standalone/drakTermServ:753
#, c-format
msgid "No kernel selected!"
msgstr "未選取核心!"

#: standalone/drakTermServ:756
#, c-format
msgid "Build Single NIC -->"
msgstr "建立單一網路卡 -->"

#: standalone/drakTermServ:760
#, c-format
msgid "No NIC selected!"
msgstr "未選擇網路卡!"

#: standalone/drakTermServ:763
#, c-format
msgid "Build All Kernels -->"
msgstr "建立所有核心 -->"

#: standalone/drakTermServ:774
#, c-format
msgid "<-- Delete"
msgstr "<-- 刪除"

#: standalone/drakTermServ:779
#, fuzzy, c-format
msgid "No image selected!"
msgstr "未選擇網路卡!"

#: standalone/drakTermServ:782
#, c-format
msgid "Delete All NBIs"
msgstr "刪除所有 NBI"

#: standalone/drakTermServ:908
#, c-format
msgid ""
"!!! Indicates the password in the system database is different than\n"
" the one in the Terminal Server database.\n"
"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""

#: standalone/drakTermServ:913
#, c-format
msgid "Add User -->"
msgstr "新增使用者 -->"

#: standalone/drakTermServ:919
#, c-format
msgid "<-- Del User"
msgstr "<-- 刪除使用者"

#: standalone/drakTermServ:955
#, fuzzy, c-format
msgid "type: %s"
msgstr "格式： "

#: standalone/drakTermServ:959
#, c-format
msgid "local config: %s"
msgstr ""

#: standalone/drakTermServ:989
#, fuzzy, c-format
msgid ""
"Allow local hardware\n"
"configuration."
msgstr "自動重新設定"

#: standalone/drakTermServ:998
#, c-format
msgid "No net boot images created!"
msgstr "並未建立網路開機映像檔"

#: standalone/drakTermServ:1017
#, fuzzy, c-format
msgid "Thin Client"
msgstr "DHCP 用戶端"

#: standalone/drakTermServ:1021
#, fuzzy, c-format
msgid "Allow Thin Clients"
msgstr "新增/刪除用戶端"

#: standalone/drakTermServ:1022
#, c-format
msgid ""
"Sync client X keyboard\n"
" settings with server."
msgstr ""

#: standalone/drakTermServ:1023
#, c-format
msgid "Add Client -->"
msgstr "新增用戶端 -->"

#: standalone/drakTermServ:1037
#, fuzzy, c-format
msgid "type: fat"
msgstr "格式： "

#: standalone/drakTermServ:1038
#, fuzzy, c-format
msgid "type: thin"
msgstr "格式： "

#: standalone/drakTermServ:1045
#, fuzzy, c-format
msgid "local config: false"
msgstr "本機密碼檔"

#: standalone/drakTermServ:1046
#, fuzzy, c-format
msgid "local config: true"
msgstr "重新設定"

#: standalone/drakTermServ:1054
#, c-format
msgid "<-- Edit Client"
msgstr "<-- 刪除用戶端"

#: standalone/drakTermServ:1080
#, c-format
msgid "Disable Local Config"
msgstr ""

#: standalone/drakTermServ:1087
#, fuzzy, c-format
msgid "Delete Client"
msgstr "<-- 刪除用戶端"

#: standalone/drakTermServ:1096
#, c-format
msgid "dhcpd Config..."
msgstr "dhcpd 設定..."

#: standalone/drakTermServ:1111
#, c-format
msgid ""
"Need to restart the Display Manager for full changes to take effect. \n"
"(service dm restart - at the console)"
msgstr ""

#: standalone/drakTermServ:1156
#, c-format
msgid "Thin clients will not work with autologin. Disable autologin?"
msgstr ""

#: standalone/drakTermServ:1172
#, c-format
msgid "All clients will use %s"
msgstr ""

#: standalone/drakTermServ:1204
#, c-format
msgid "Subnet:"
msgstr "子網路:"

#: standalone/drakTermServ:1211
#, c-format
msgid "Netmask:"
msgstr "網路遮罩"

#: standalone/drakTermServ:1218
#, c-format
msgid "Routers:"
msgstr ""

#: standalone/drakTermServ:1225
#, c-format
msgid "Subnet Mask:"
msgstr "子網路遮罩："

#: standalone/drakTermServ:1232
#, c-format
msgid "Broadcast Address:"
msgstr ""

#: standalone/drakTermServ:1239
#, fuzzy, c-format
msgid "Domain Name:"
msgstr "網域名稱"

#: standalone/drakTermServ:1247
#, fuzzy, c-format
msgid "Name Servers:"
msgstr "Samba 伺服器"

#: standalone/drakTermServ:1258
#, c-format
msgid "IP Range Start:"
msgstr ""

#: standalone/drakTermServ:1259
#, c-format
msgid "IP Range End:"
msgstr ""

#: standalone/drakTermServ:1301
#, c-format
msgid "Append TS Includes To Existing Config"
msgstr ""

#: standalone/drakTermServ:1303
#, c-format
msgid "Write Config"
msgstr "寫入設定"

#: standalone/drakTermServ:1319
#, c-format
msgid "dhcpd Server Configuration"
msgstr "dhcpd 伺服器設定"

#: standalone/drakTermServ:1320
#, c-format
msgid ""
"Most of these values were extracted\n"
"from your running system.\n"
"You can modify as needed."
msgstr ""

#: standalone/drakTermServ:1323
#, c-format
msgid "Dynamic IP Address Pool:"
msgstr ""

#: standalone/drakTermServ:1474
#, c-format
msgid "Please insert floppy disk:"
msgstr "請插入一張軟片:"

#: standalone/drakTermServ:1478
#, c-format
msgid "Could not access the floppy!"
msgstr "無法存取到軟碟"

#: standalone/drakTermServ:1480
#, c-format
msgid "Floppy can be removed now"
msgstr "請移開軟碟內的軟片"

#: standalone/drakTermServ:1483
#, c-format
msgid "No floppy drive available!"
msgstr "沒有可用的軟碟機"

#: standalone/drakTermServ:1488
#, fuzzy, c-format
msgid "PXE image is %s/%s"
msgstr "網路開機的映像檔案是 %s"

#: standalone/drakTermServ:1490
#, fuzzy, c-format
msgid "Error writing %s/%s"
msgstr "寫入檔案 %s 時發生錯誤"

#: standalone/drakTermServ:1500
#, c-format
msgid "Etherboot ISO image is %s"
msgstr "網路開機的映像檔案是 %s"

#: standalone/drakTermServ:1502
#, c-format
msgid "Something went wrong! - Is mkisofs installed?"
msgstr "製作時發生錯誤, 您確認你有安裝 mkisofs 程式"

#: standalone/drakTermServ:1523
#, c-format
msgid "Need to create /etc/dhcpd.conf first!"
msgstr "需要建立 /etc/dhcpd.conf 檔案！"

#: standalone/drakTermServ:1683
#, c-format
msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""

#: standalone/drakTermServ:1696
#, fuzzy, c-format
msgid "%s is not a user..\n"
msgstr "%s 沒有正常回應"

#: standalone/drakTermServ:1697
#, c-format
msgid "%s is already a Terminal Server user\n"
msgstr ""

#: standalone/drakTermServ:1699
#, c-format
msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""

#: standalone/drakTermServ:1701
#, c-format
msgid "%s added to Terminal Server\n"
msgstr ""

#: standalone/drakTermServ:1718
#, fuzzy, c-format
msgid "Deleted %s...\n"
msgstr "偵測到 %s"

#: standalone/drakTermServ:1720
#: standalone/drakTermServ:1793
#, fuzzy, c-format
msgid "%s not found...\n"
msgstr "%s 沒有正常回應"

#: standalone/drakTermServ:1821
#, c-format
msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""

#: standalone/drakTermServ:1961
#, c-format
msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""

#: standalone/drakautoinst:38
#, c-format
msgid "Error!"
msgstr "錯誤！"

#: standalone/drakautoinst:39
#, c-format
msgid "I can not find needed image file `%s'."
msgstr "我找不到這個重要的檔案 %s 。"

#: standalone/drakautoinst:41
#, c-format
msgid "Auto Install Configurator"
msgstr "自動安裝設定程式"

#: standalone/drakautoinst:42
#, fuzzy, c-format
msgid ""
"You are about to configure an Auto Install floppy. This feature is somewhat dangerous and must be used circumspectly.\n"
"\n"
"With that feature, you will be able to replay the installation you've performed on this computer, being interactively prompted for some steps, in order to change their values.\n"
"\n"
"For maximum safety, the partitioning and formatting will never be performed automatically, whatever you chose during the install of this computer.\n"
"\n"
"Press ok to continue."
msgstr ""
"目前準備設定自動安裝軟片。這個功能有點危險, 使用上要很慎重。\n"
"\n"
"這個功能, 您將能夠很自動的在所要安裝的電腦上自動進行安裝的\n"
"動作, 有些步驟則能夠停下來讓使用者自己手動進行一些操作。\n"
"\n"
"為了最安全考量, 所有分割區劃分以及格式化動作將會自動進行。\n"
"\n"
"您希望繼續嗎？"

#: standalone/drakautoinst:60
#, c-format
msgid "replay"
msgstr "重播"

#: standalone/drakautoinst:60
#: standalone/drakautoinst:69
#, c-format
msgid "manual"
msgstr ""

#: standalone/drakautoinst:64
#, c-format
msgid "Automatic Steps Configuration"
msgstr "自動化步驟設定"

#: standalone/drakautoinst:65
#, c-format
msgid "Please choose for each step whether it will replay like your install, or it will be manual"
msgstr "請選擇每一個安裝的步驟, 這些將會是您所操作的安裝過程"

#: standalone/drakautoinst:77
#: standalone/drakautoinst:78
#: standalone/drakautoinst:92
#, c-format
msgid "Creating auto install floppy"
msgstr "正在製作自動安裝軟片"

#: standalone/drakautoinst:90
#, fuzzy, c-format
msgid "Insert another blank floppy in drive %s (for drivers disk)"
msgstr "請在 %s 中插入一片空白軟片"

#: standalone/drakautoinst:91
#, fuzzy, c-format
msgid "Creating auto install floppy (drivers disk)"
msgstr "正在製作自動安裝軟片"

#: standalone/drakautoinst:158
#, c-format
msgid ""
"\n"
"Welcome.\n"
"\n"
"The parameters of the auto-install are available in the sections on the left"
msgstr ""
"\n"
"歡迎!\n"
"\n"
"自動安裝內可用的參數項目都在左邊的區段內"

#: standalone/drakautoinst:252
#: standalone/drakgw:597
#: standalone/drakvpn:902
#: standalone/scannerdrake:405
#, c-format
msgid "Congratulations!"
msgstr "恭喜!!"

#: standalone/drakautoinst:253
#, c-format
msgid ""
"The floppy has been successfully generated.\n"
"You may now replay your installation."
msgstr ""
"已經成功建立自動安裝軟片。\n"
"您可以使用這張軟片進行自動安裝的程序"

#: standalone/drakautoinst:289
#, c-format
msgid "Auto Install"
msgstr "自動安裝"

#: standalone/drakautoinst:358
#, c-format
msgid "Add an item"
msgstr "新增項目"

#: standalone/drakautoinst:365
#, c-format
msgid "Remove the last item"
msgstr "移除之前項目"

#: standalone/drakbackup:88
#, fuzzy, c-format
msgid "hd"
msgstr "Chad"

#: standalone/drakbackup:88
#, fuzzy, c-format
msgid "tape"
msgstr "磁帶"

#: standalone/drakbackup:152
#, c-format
msgid "Expect is an extension to the TCL scripting language that allows interactive sessions without user intervention."
msgstr ""

#: standalone/drakbackup:153
#, c-format
msgid "Store the password for this system in drakbackup configuration."
msgstr ""

#: standalone/drakbackup:154
#, c-format
msgid "For a multisession CD, only the first session will erase the cdrw. Otherwise the cdrw is erased before each backup."
msgstr ""

#: standalone/drakbackup:155
#, c-format
msgid "This option will save files that have changed.  Exact behavior depends on whether incremental or differential mode is used."
msgstr ""

#: standalone/drakbackup:156
#, c-format
msgid "Incremental backups only save files that have changed or are new since the last backup."
msgstr ""

#: standalone/drakbackup:157
#, c-format
msgid "Differential backups only save files that have changed or are new since the original 'base' backup."
msgstr ""

#: standalone/drakbackup:158
#, c-format
msgid "This should be a local user or email address that you want the backup results sent to. You will need to define a functioning mail server."
msgstr ""

#: standalone/drakbackup:159
#, c-format
msgid "Files or wildcards listed in a .backupignore file at the top of a directory tree will not be backed up."
msgstr ""

#: standalone/drakbackup:160
#, c-format
msgid "For backups to other media, files are still created on the hard drive, then moved to the other media.  Enabling this option will remove the hard drive tar files after the backup."
msgstr ""

#: standalone/drakbackup:161
#, c-format
msgid "Some protocols, like rsync, may be configured at the server end.  Rather than using a directory path, you would use the 'module' name for the service path."
msgstr ""

#: standalone/drakbackup:162
#, c-format
msgid "Custom allows you to specify your own day and time.  The other options use run-parts in /etc/crontab."
msgstr ""

#: standalone/drakbackup:326
#, c-format
msgid "No media selected for cron operation."
msgstr ""

#: standalone/drakbackup:330
#, c-format
msgid "No interval selected for cron operation."
msgstr ""

#: standalone/drakbackup:377
#, fuzzy, c-format
msgid "Interval cron not available as non-root"
msgstr "Cron 使用非 root 身份執行時無法使用"

#: standalone/drakbackup:462
#: standalone/logdrake:437
#, c-format
msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""

#: standalone/drakbackup:466
#: standalone/logdrake:442
#, c-format
msgid "\"%s\" is a local user, but you did not select a local smtp, so you must use a complete email address!"
msgstr ""

#: standalone/drakbackup:475
#, c-format
msgid "Valid user list changed, rewriting config file."
msgstr ""

#: standalone/drakbackup:477
#, fuzzy, c-format
msgid "Old user list:\n"
msgstr ""
"\n"
"- 使用者檔案:\n"

#: standalone/drakbackup:479
#, fuzzy, c-format
msgid "New user list:\n"
msgstr ""
"\n"
"- 使用者檔案:\n"

#: standalone/drakbackup:524
#, fuzzy, c-format
msgid ""
"\n"
"                      DrakBackup Report \n"
msgstr ""
"\n"
"                      DrakBackup 報表清單 \n"
"\n"

#: standalone/drakbackup:525
#, c-format
msgid ""
"\n"
"                      DrakBackup Daemon Report\n"
msgstr ""
"\n"
"                      DrakBackup Daemon 報表清單\n"

#: standalone/drakbackup:531
#, c-format
msgid ""
"\n"
"                    DrakBackup Report Details\n"
"\n"
"\n"
msgstr ""
"\n"
"                    DrakBackup 資料備份報表細目\n"
"\n"
"\n"

#: standalone/drakbackup:556
#: standalone/drakbackup:627
#: standalone/drakbackup:683
#, c-format
msgid "Total progress"
msgstr "全部進度"

#: standalone/drakbackup:609
#, fuzzy, c-format
msgid ""
"%s exists, delete?\n"
"\n"
"If you've already done this process you'll probably\n"
" need to purge the entry from authorized_keys on the server."
msgstr ""
"%s 已經存在了, 您要刪除該項目嗎？\n"
"\n"
"警告：若是您已經完成該工作進度, 也許您可以刪除該主機上\n"
"認證憑證檔案。"

#: standalone/drakbackup:618
#, c-format
msgid "This may take a moment to generate the keys."
msgstr "產生憑證檔案, 請稍後...。"

#: standalone/drakbackup:625
#, fuzzy, c-format
msgid "Cannot spawn %s."
msgstr "錯誤, 無法執行 %s。"

#: standalone/drakbackup:642
#, c-format
msgid "No password prompt on %s at port %s"
msgstr "%s 無密碼回應 (位於連接埠 %s)"

#: standalone/drakbackup:643
#, c-format
msgid "Bad password on %s"
msgstr "%s - 錯誤的密碼"

#: standalone/drakbackup:644
#, c-format
msgid "Permission denied transferring %s to %s"
msgstr "由 %s 傳輸到 %s 發生錯誤, 權限拒絕"

#: standalone/drakbackup:645
#, c-format
msgid "Can not find %s on %s"
msgstr "無法找到 %s (位於 %s)"

#: standalone/drakbackup:649
#, c-format
msgid "%s not responding"
msgstr "%s 沒有正常回應"

#: standalone/drakbackup:653
#, c-format
msgid ""
"Transfer successful\n"
"You may want to verify you can login to the server with:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"without being prompted for a password."
msgstr ""
"傳輸成功\n"
"您也許想要確認您能夠登入伺服器以:\n"
"\n"
"ssh -i %s %s@%s\n"
"\n"
"這應該不需要輸入任何密碼."

#: standalone/drakbackup:697
#, c-format
msgid "WebDAV remote site already in sync!"
msgstr "遠端的 WebDAV 站台已經在進行同步了！"

#: standalone/drakbackup:701
#, c-format
msgid "WebDAV transfer failed!"
msgstr "WebDAV 傳輸失敗！"

#: standalone/drakbackup:722
#, c-format
msgid "No CD-R/DVD-R in drive!"
msgstr "未放入 CDR/DVDR！"

#: standalone/drakbackup:726
#, c-format
msgid "Does not appear to be recordable media!"
msgstr "似乎不是可燒錄的媒介裝置！"

#: standalone/drakbackup:731
#, c-format
msgid "Not erasable media!"
msgstr "不是可抹寫的媒介裝置！"

#: standalone/drakbackup:773
#, c-format
msgid "This may take a moment to erase the media."
msgstr "刪除該媒介裝置需要花費一些時間。"

#: standalone/drakbackup:831
#, c-format
msgid "Permission problem accessing CD."
msgstr "權限的問題無法存取 CD."

#: standalone/drakbackup:858
#, c-format
msgid "No tape in %s!"
msgstr "%s 內未放入磁帶！"

#: standalone/drakbackup:965
#, c-format
msgid ""
"Backup quota exceeded!\n"
"%d MB used vs %d MB allocated."
msgstr ""

#: standalone/drakbackup:984
#: standalone/drakbackup:1017
#, c-format
msgid "Backup system files..."
msgstr "備份系統檔案..."

#: standalone/drakbackup:1018
#: standalone/drakbackup:1059
#, c-format
msgid "Hard Disk Backup files..."
msgstr "硬碟備份檔案..."

#: standalone/drakbackup:1058
#, c-format
msgid "Backup User files..."
msgstr "備份使用者檔案..."

#: standalone/drakbackup:1093
#, c-format
msgid "Backup Other files..."
msgstr "備份其他檔案..."

#: standalone/drakbackup:1094
#, c-format
msgid "Hard Disk Backup Progress..."
msgstr "硬碟備份進度..."

#: standalone/drakbackup:1099
#, c-format
msgid "No changes to backup!"
msgstr "備份沒有任何異動！"

#: standalone/drakbackup:1117
#: standalone/drakbackup:1141
#, c-format
msgid ""
"\n"
"Drakbackup activities via %s:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 透過 %s 活動:\n"
"\n"

#: standalone/drakbackup:1126
#, c-format
msgid ""
"\n"
" FTP connection problem: It was not possible to send your backup files by FTP.\n"
msgstr ""
"\n"
"(!) FTP 連結錯誤：由於 FTP 連線錯誤, 備份檔案將沒透過 FTP 備份傳送出去。\n"

#: standalone/drakbackup:1127
#, fuzzy, c-format
msgid "Error during sending file via FTP. Please correct your FTP configuration."
msgstr ""
"使用 FTP 上傳檔案時發生錯誤。\n"
"請檢視您的 FTP 設定是否設定。"

#: standalone/drakbackup:1129
#, fuzzy, c-format
msgid "file list sent by FTP: %s\n"
msgstr ""
"透過 FTP 傳送檔案清單: %s\n"
" "

#: standalone/drakbackup:1146
#, c-format
msgid ""
"\n"
"Drakbackup activities via CD:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 使用 CD 方式進行處理：\n"
"\n"

#: standalone/drakbackup:1151
#, c-format
msgid ""
"\n"
"Drakbackup activities via tape:\n"
"\n"
msgstr ""
"\n"
"Drakbackup 使用磁帶機方式進行處理：\n"
"\n"

#: standalone/drakbackup:1160
#, fuzzy, c-format
msgid "Error sending mail. Your report mail was not sent."
msgstr ""
"執行 sendmail 程式時發生錯誤\n"
"  由於該錯誤, 備份報表檔案將無法送出\n"
"  請檢視您系統的 sendmail 是否有錯誤。"

#: standalone/drakbackup:1161
#, c-format
msgid " Error while sending mail. \n"
msgstr "郵件發送時發生錯誤。\n"

#: standalone/drakbackup:1191
#, c-format
msgid "Can not create catalog!"
msgstr "無法建立 catalog 資訊"

#: standalone/drakbackup:1420
#, c-format
msgid ""
"\n"
"Please check all options that you need.\n"
msgstr ""
"\n"
"請檢視您所需要的全部項目。\n"

#: standalone/drakbackup:1421
#, c-format
msgid "These options can backup and restore all files in your /etc directory.\n"
msgstr "這個選項能夠備份與還原您系統的 /etc 目錄。\n"

#: standalone/drakbackup:1422
#, c-format
msgid "Backup your System files. (/etc directory)"
msgstr "備份您的系統檔案。(/etc 目錄)"

#: standalone/drakbackup:1423
#: standalone/drakbackup:1487
#: standalone/drakbackup:1553
#, fuzzy, c-format
msgid "Use Incremental/Differential Backups  (do not replace old backups)"
msgstr "使用遞增備份 (不會覆蓋舊有備份)"

#: standalone/drakbackup:1425
#: standalone/drakbackup:1489
#: standalone/drakbackup:1555
#, c-format
msgid "Use Incremental Backups"
msgstr "使用遞增備份 (不會覆蓋舊有備份)"

#: standalone/drakbackup:1425
#: standalone/drakbackup:1489
#: standalone/drakbackup:1555
#, c-format
msgid "Use Differential Backups"
msgstr ""

#: standalone/drakbackup:1427
#, c-format
msgid "Do not include critical files (passwd, group, fstab)"
msgstr "不要包含重要的檔案 (passwd、group、fstab)"

#: standalone/drakbackup:1428
#, c-format
msgid ""
"With this option you will be able to restore any version\n"
" of your /etc directory."
msgstr "使用該選項您將能夠還原任何版本 /etc 檔案目錄."

#: standalone/drakbackup:1459
#, c-format
msgid "Please check all users that you want to include in your backup."
msgstr "請檢查希望要備份的所有使用者項目。"

#: standalone/drakbackup:1486
#, c-format
msgid "Do not include the browser cache"
msgstr "不要包含瀏覽器的快取資料檔"

#: standalone/drakbackup:1540
#, fuzzy, c-format
msgid "Select the files or directories and click on 'OK'"
msgstr "選取檔案或者是目錄, 然後點選 '加入'"

#: standalone/drakbackup:1541
#: standalone/drakfont:661
#, c-format
msgid "Remove Selected"
msgstr "移除選取項目"

#: standalone/drakbackup:1604
#, c-format
msgid "Users"
msgstr "使用者"

#: standalone/drakbackup:1624
#, c-format
msgid "Use network connection to backup"
msgstr "使用 FTP 連線備份"

#: standalone/drakbackup:1626
#, c-format
msgid "Net Method:"
msgstr "網路方式:"

#: standalone/drakbackup:1630
#, c-format
msgid "Use Expect for SSH"
msgstr ""

#: standalone/drakbackup:1631
#, fuzzy, c-format
msgid "Create/Transfer backup keys for SSH"
msgstr ""
"建立/傳送\n"
"備份 SSH 的憑證檔案"

#: standalone/drakbackup:1633
#, fuzzy, c-format
msgid "Transfer Now"
msgstr ""
"  傳送    \n"
"現在"

#: standalone/drakbackup:1635
#, fuzzy, c-format
msgid "Other (not drakbackup) keys in place already"
msgstr ""
"其他 (非 drakbackup)\n"
"認證憑證檔案已經存在"

#: standalone/drakbackup:1638
#, fuzzy, c-format
msgid "Host name or IP."
msgstr "主機名稱"

#: standalone/drakbackup:1643
#, c-format
msgid "Directory (or module) to put the backup on this host."
msgstr "請輸入要備份到該主機的所在目錄名稱"

#: standalone/drakbackup:1655
#, c-format
msgid "Remember this password"
msgstr "記住該密碼"

#: standalone/drakbackup:1671
#, c-format
msgid "Need hostname, username and password!"
msgstr "需要指定主機名稱、使用者與密碼！"

#: standalone/drakbackup:1762
#, c-format
msgid "Use CD-R/DVD-R to backup"
msgstr "使用 CD/DVDROM 備份"

#: standalone/drakbackup:1765
#, fuzzy, c-format
msgid "Choose your CD/DVD device"
msgstr "請選取您 CD/DVD 容量大小"

#: standalone/drakbackup:1770
#, fuzzy, c-format
msgid "Choose your CD/DVD media size"
msgstr "請選取您 CD/DVD 容量大小"

#: standalone/drakbackup:1777
#, c-format
msgid "Multisession CD"
msgstr "Multisession CD"

#: standalone/drakbackup:1779
#, c-format
msgid "CDRW media"
msgstr ""

#: standalone/drakbackup:1785
#, fuzzy, c-format
msgid "Erase your RW media (1st Session)"
msgstr "如果您要先清除該讀寫媒介裝置上的資料 (1st Session), 請選取該項目"

#: standalone/drakbackup:1786
#, c-format
msgid " Erase Now "
msgstr " 刪除中 "

#: standalone/drakbackup:1792
#, c-format
msgid "DVD+RW media"
msgstr ""

#: standalone/drakbackup:1794
#, fuzzy, c-format
msgid "DVD-R media"
msgstr "裝置設備"

#: standalone/drakbackup:1796
#, fuzzy, c-format
msgid "DVDRAM device"
msgstr "裝置設備"

#: standalone/drakbackup:1827
#, c-format
msgid "No CD device defined!"
msgstr "尚未有任何 CD 裝置定義!"

#: standalone/drakbackup:1869
#, c-format
msgid "Use tape to backup"
msgstr "使用磁帶進行備份"

#: standalone/drakbackup:1872
#, fuzzy, c-format
msgid "Device name to use for backup"
msgstr "請輸入您要用來備份使用的裝置名稱"

#: standalone/drakbackup:1878
#, c-format
msgid "Backup directly to tape"
msgstr ""

#: standalone/drakbackup:1884
#, c-format
msgid "Do not rewind tape after backup"
msgstr "備份之後不回捲磁帶"

#: standalone/drakbackup:1890
#, c-format
msgid "Erase tape before backup"
msgstr "使用磁帶進行備份"

#: standalone/drakbackup:1896
#, fuzzy, c-format
msgid "Eject tape after the backup"
msgstr "使用磁帶進行備份"

#: standalone/drakbackup:1968
#, c-format
msgid "Enter the directory to save to:"
msgstr "請輸入您要儲存的目錄名稱："

#: standalone/drakbackup:1972
#, fuzzy, c-format
msgid "Directory to save to"
msgstr "請輸入您要儲存的目錄名稱："

#: standalone/drakbackup:1977
#, fuzzy, c-format
msgid ""
"Maximum size\n"
" allowed for Drakbackup (MB)"
msgstr "請輸入備份允許最大的大小"

#: standalone/drakbackup:2041
#, c-format
msgid "CD-R / DVD-R"
msgstr "CDROM / DVDROM"

#: standalone/drakbackup:2046
#, c-format
msgid "HardDrive / NFS"
msgstr "硬碟 / NFS"

#: standalone/drakbackup:2061
#: standalone/drakbackup:2062
#: standalone/drakbackup:2067
#, c-format
msgid "hourly"
msgstr "每小時"

#: standalone/drakbackup:2061
#: standalone/drakbackup:2063
#: standalone/drakbackup:2068
#, c-format
msgid "daily"
msgstr "每天"

#: standalone/drakbackup:2061
#: standalone/drakbackup:2064
#: standalone/drakbackup:2069
#, c-format
msgid "weekly"
msgstr "每週"

#: standalone/drakbackup:2061
#: standalone/drakbackup:2065
#: standalone/drakbackup:2070
#, c-format
msgid "monthly"
msgstr "每月"

#: standalone/drakbackup:2061
#: standalone/drakbackup:2066
#: standalone/drakbackup:2071
#, c-format
msgid "custom"
msgstr "自訂"

#: standalone/drakbackup:2075
#, c-format
msgid "January"
msgstr "1月"

#: standalone/drakbackup:2075
#, c-format
msgid "February"
msgstr "2月"

#: standalone/drakbackup:2075
#, c-format
msgid "March"
msgstr "3月"

#: standalone/drakbackup:2076
#, c-format
msgid "April"
msgstr "4月"

#: standalone/drakbackup:2076
#, c-format
msgid "May"
msgstr "5月"

#: standalone/drakbackup:2076
#, c-format
msgid "June"
msgstr "6月"

#: standalone/drakbackup:2076
#, c-format
msgid "July"
msgstr "7月"

#: standalone/drakbackup:2076
#, c-format
msgid "August"
msgstr "8月"

#: standalone/drakbackup:2076
#, c-format
msgid "September"
msgstr "9月"

#: standalone/drakbackup:2077
#, c-format
msgid "October"
msgstr "10月"

#: standalone/drakbackup:2077
#, c-format
msgid "November"
msgstr "11月"

#: standalone/drakbackup:2077
#, c-format
msgid "December"
msgstr "12月"

#: standalone/drakbackup:2080
#, c-format
msgid "Sunday"
msgstr "星期日"

#: standalone/drakbackup:2080
#, c-format
msgid "Monday"
msgstr "星期一"

#: standalone/drakbackup:2080
#, c-format
msgid "Tuesday"
msgstr "星期二"

#: standalone/drakbackup:2081
#, c-format
msgid "Wednesday"
msgstr "星期三"

#: standalone/drakbackup:2081
#, c-format
msgid "Thursday"
msgstr "星期四"

#: standalone/drakbackup:2081
#, c-format
msgid "Friday"
msgstr "星期五"

#: standalone/drakbackup:2081
#, c-format
msgid "Saturday"
msgstr "星期六"

#: standalone/drakbackup:2113
#, c-format
msgid "Use daemon"
msgstr "使用排程程式"

#: standalone/drakbackup:2117
#, c-format
msgid "Please choose the time interval between each backup"
msgstr "請輸入每一次備份的間隔時間"

#: standalone/drakbackup:2123
#, c-format
msgid "Custom setup/crontab entry:"
msgstr ""

#: standalone/drakbackup:2128
#, c-format
msgid "Minute"
msgstr "分"

#: standalone/drakbackup:2132
#, c-format
msgid "Hour"
msgstr "時"

#: standalone/drakbackup:2136
#, c-format
msgid "Day"
msgstr "天"

#: standalone/drakbackup:2140
#, c-format
msgid "Month"
msgstr "月"

#: standalone/drakbackup:2144
#, fuzzy, c-format
msgid "Weekday"
msgstr "星期三"

#: standalone/drakbackup:2150
#, fuzzy, c-format
msgid "Please choose the media for backup."
msgstr "請選擇要用來備份的裝置"

#: standalone/drakbackup:2156
#, fuzzy, c-format
msgid "Please be sure that the cron daemon is included in your services."
msgstr ""
"請確定您系統有安裝並且有啟用 cron 排程服務程式。\n"
"\n"
"請注意目前所有 '網路' 媒介都會使用硬碟。"

#: standalone/drakbackup:2157
#, c-format
msgid "If your machine is not on all the time, you might want to install anacron."
msgstr ""

#: standalone/drakbackup:2158
#, fuzzy, c-format
msgid "Note that currently all 'net' media also use the hard drive."
msgstr ""
"請確定您系統有安裝並且有啟用 cron 排程服務程式。\n"
"\n"
"請注意目前所有 '網路' 媒介都會使用硬碟。"

#: standalone/drakbackup:2205
#, fuzzy, c-format
msgid "Please choose the compression type"
msgstr "請選取要回存的日期"

#: standalone/drakbackup:2209
#, fuzzy, c-format
msgid "Use .backupignore files"
msgstr "備份檔案啟用最大容量配給限制。"

#: standalone/drakbackup:2211
#, c-format
msgid "Send mail report after each backup to:"
msgstr "在每次備份完成後發送郵件通知該使用者："

#: standalone/drakbackup:2217
#, c-format
msgid "SMTP server for mail:"
msgstr "電子郵件 SMTP 伺服器名稱：”"

#: standalone/drakbackup:2222
#, c-format
msgid "Delete Hard Drive tar files after backup to other media."
msgstr "備份成功後刪除硬碟上的 tar 檔案"

#: standalone/drakbackup:2262
#, c-format
msgid "What"
msgstr "備份項目設定"

#: standalone/drakbackup:2267
#, c-format
msgid "Where"
msgstr "備份儲存位置設定"

#: standalone/drakbackup:2272
#, c-format
msgid "When"
msgstr "備份時間設定"

#: standalone/drakbackup:2277
#, c-format
msgid "More Options"
msgstr "更多選項"

#: standalone/drakbackup:2290
#, c-format
msgid "Backup destination not configured..."
msgstr "備份功能尚未設定..."

#: standalone/drakbackup:2310
#: standalone/drakbackup:4234
#, c-format
msgid "Drakbackup Configuration"
msgstr "Drakbackup 組態"

#: standalone/drakbackup:2326
#, c-format
msgid "Please choose where you want to backup"
msgstr "請選取您要備份的項目"

#: standalone/drakbackup:2329
#, fuzzy, c-format
msgid "Hard Drive used to prepare backups for all media"
msgstr "備份成功後刪除硬碟上的 tar 檔案"

#: standalone/drakbackup:2329
#, c-format
msgid "Across Network"
msgstr "透過網路"

#: standalone/drakbackup:2329
#, c-format
msgid "On CD-R"
msgstr "於 CD-R 裝置"

#: standalone/drakbackup:2329
#, c-format
msgid "On Tape Device"
msgstr "於磁帶機裝置"

#: standalone/drakbackup:2375
#, c-format
msgid "Backup Users"
msgstr "備份使用者資料"

#: standalone/drakbackup:2376
#, fuzzy, c-format
msgid " (Default is all users)"
msgstr "預設印表機"

#: standalone/drakbackup:2389
#, c-format
msgid "Please choose what you want to backup"
msgstr "請選取您要備份的項目"

#: standalone/drakbackup:2390
#, c-format
msgid "Backup System"
msgstr "備份系統資料"

#: standalone/drakbackup:2392
#, c-format
msgid "Select user manually"
msgstr "手動選取使用者"

#: standalone/drakbackup:2421
#, c-format
msgid "Please select data to backup..."
msgstr "請選擇用來備份資料的裝置..."

#: standalone/drakbackup:2493
#, c-format
msgid ""
"\n"
"Backup Sources: \n"
msgstr ""
"\n"
"備份來源檔：\n"

#: standalone/drakbackup:2494
#, c-format
msgid ""
"\n"
"- System Files:\n"
msgstr ""
"\n"
"- 系統檔案：\n"

#: standalone/drakbackup:2496
#, c-format
msgid ""
"\n"
"- User Files:\n"
msgstr ""
"\n"
"- 使用者檔案：\n"

#: standalone/drakbackup:2498
#, c-format
msgid ""
"\n"
"- Other Files:\n"
msgstr ""
"\n"
"- 其他檔案：\n"

#: standalone/drakbackup:2500
#, c-format
msgid ""
"\n"
"- Save on Hard drive on path: %s\n"
msgstr ""
"\n"
"- 儲存於硬碟的路徑：%s\n"

#: standalone/drakbackup:2501
#, c-format
msgid "\tLimit disk usage to %s MB\n"
msgstr "\t限制磁碟使用量為 %s MB\n"

#: standalone/drakbackup:2504
#, c-format
msgid ""
"\n"
"- Delete hard drive tar files after backup.\n"
msgstr ""
"\n"
"- 備份完成後刪除硬碟內先前備份的 tar 檔案。\n"

#: standalone/drakbackup:2509
#, c-format
msgid ""
"\n"
"- Burn to CD"
msgstr ""
"\n"
"- 燒錄到 CD 片"

#: standalone/drakbackup:2510
#, c-format
msgid "RW"
msgstr "讀寫"

#: standalone/drakbackup:2511
#, c-format
msgid " on device: %s"
msgstr " 位於位置: %s"

#: standalone/drakbackup:2512
#, c-format
msgid " (multi-session)"
msgstr ""

#: standalone/drakbackup:2513
#, c-format
msgid ""
"\n"
"- Save to Tape on device: %s"
msgstr ""
"\n"
"- 儲存於該磁帶機裝置：%s"

#: standalone/drakbackup:2514
#, c-format
msgid "\t\tErase=%s"
msgstr "\t\t刪除=%s"

#: standalone/drakbackup:2516
#, c-format
msgid "\tBackup directly to Tape\n"
msgstr "\t將目錄備份到磁帶中\n"

#: standalone/drakbackup:2518
#, c-format
msgid ""
"\n"
"- Save via %s on host: %s\n"
msgstr ""
"\n"
"- 儲存 %s 於站台 - %s\n"

#: standalone/drakbackup:2519
#, c-format
msgid ""
"\t\t user name: %s\n"
"\t\t on path: %s \n"
msgstr ""
"\t\t 使用者名稱: %s\n"
"\t\t 位於路徑: %s \n"

#: standalone/drakbackup:2520
#, c-format
msgid ""
"\n"
"- Options:\n"
msgstr ""
"\n"
"- 選項:\n"

#: standalone/drakbackup:2521
#, c-format
msgid "\tDo not include System Files\n"
msgstr "\t不要包含系統檔案\n"

#: standalone/drakbackup:2523
#, c-format
msgid "\tBackups use tar and bzip2\n"
msgstr "\t使用 tar 與 bzip2 進行備份\n"

#: standalone/drakbackup:2524
#, c-format
msgid "\tBackups use tar and gzip\n"
msgstr "\t使用 tar 與 gzip 進行備份\n"

#: standalone/drakbackup:2525
#, fuzzy, c-format
msgid "\tBackups use tar only\n"
msgstr "\t使用 tar 與 gzip 進行備份\n"

#: standalone/drakbackup:2527
#, c-format
msgid "\tUse .backupignore files\n"
msgstr "\t使用.backupignore 檔案\n"

#: standalone/drakbackup:2528
#, c-format
msgid "\tSend mail to %s\n"
msgstr "\t傳送郵件給 %s\n"

#: standalone/drakbackup:2529
#, c-format
msgid "\tUsing SMTP server %s\n"
msgstr "\t使用 SMTP 伺服器 %s\n"

#: standalone/drakbackup:2531
#, c-format
msgid ""
"\n"
"- Daemon, %s via:\n"
msgstr ""
"\n"
"- Daemon (%s) 服務程式包含 :\n"

#: standalone/drakbackup:2532
#, c-format
msgid "\t-Hard drive.\n"
msgstr "\t-硬碟\n"

#: standalone/drakbackup:2533
#, c-format
msgid "\t-CD-R.\n"
msgstr "\t-光碟機\n"

#: standalone/drakbackup:2534
#, c-format
msgid "\t-Tape \n"
msgstr "\t-磁帶機\n"

#: standalone/drakbackup:2535
#, c-format
msgid "\t-Network by FTP.\n"
msgstr "\t-網路 (透過 FTP)\n"

#: standalone/drakbackup:2536
#, c-format
msgid "\t-Network by SSH.\n"
msgstr "\t網路 (透過 SSH)\n"

#: standalone/drakbackup:2537
#, c-format
msgid "\t-Network by rsync.\n"
msgstr "\t-網路 (透過 rsync)\n"

#: standalone/drakbackup:2538
#, c-format
msgid "\t-Network by webdav.\n"
msgstr "\t-網路 (透過 webdav)\n"

#: standalone/drakbackup:2540
#, c-format
msgid "No configuration, please click Wizard or Advanced.\n"
msgstr "尚未設定任何組態項目, 請點選巫師或者是進階模式建立之。\n"

#: standalone/drakbackup:2545
#, c-format
msgid ""
"List of data to restore:\n"
"\n"
msgstr ""
"要回存的資料清單:\n"
"\n"

#: standalone/drakbackup:2547
#, fuzzy, c-format
msgid "- Restore System Files.\n"
msgstr ""
"\n"
"- 系統檔案:\n"

#: standalone/drakbackup:2549
#: standalone/drakbackup:2559
#, c-format
msgid "   - from date: %s %s\n"
msgstr ""

#: standalone/drakbackup:2552
#, fuzzy, c-format
msgid "- Restore User Files: \n"
msgstr ""
"\n"
"- 使用者檔案:\n"

#: standalone/drakbackup:2557
#, fuzzy, c-format
msgid "- Restore Other Files: \n"
msgstr ""
"\n"
"- 其他檔案:\n"

#: standalone/drakbackup:2736
#, c-format
msgid ""
"List of data corrupted:\n"
"\n"
msgstr ""
"毀損的資料檔案清單:\n"
"\n"

#: standalone/drakbackup:2738
#, c-format
msgid "Please uncheck or remove it on next time."
msgstr "下一次請取消或者是移除該項目。"

#: standalone/drakbackup:2748
#, c-format
msgid "Backup files are corrupted"
msgstr "備份的檔案已經毀損"

#: standalone/drakbackup:2769
#, c-format
msgid "          All of your selected data have been          "
msgstr "          您所選取的所有資料已經                       "

#: standalone/drakbackup:2770
#, c-format
msgid "          Successfully Restored on %s       "
msgstr "          成功回存到 %s                    "

#: standalone/drakbackup:2890
#, c-format
msgid "         Restore Configuration       "
msgstr "         回存組態設定       "

#: standalone/drakbackup:2918
#, c-format
msgid "OK to restore the other files."
msgstr "選取 OK 來回存其他檔案。"

#: standalone/drakbackup:2934
#, c-format
msgid "User list to restore (only the most recent date per user is important)"
msgstr "回存的使用者清單 (只有回存最近使用者重要的檔案)"

#: standalone/drakbackup:2999
#, fuzzy, c-format
msgid "Please choose the date to restore:"
msgstr "請選取要回存的日期"

#: standalone/drakbackup:3036
#, c-format
msgid "Restore from Hard Disk."
msgstr "由硬碟回存。"

#: standalone/drakbackup:3038
#, fuzzy, c-format
msgid "Enter the directory where backups are stored"
msgstr "請輸入備份資料所要回存的目錄"

#: standalone/drakbackup:3042
#, fuzzy, c-format
msgid "Directory with backups"
msgstr "回存所有備份資料"

#: standalone/drakbackup:3096
#, c-format
msgid "Select another media to restore from"
msgstr "請選取要用來回存資料的裝置來源"

#: standalone/drakbackup:3098
#, c-format
msgid "Other Media"
msgstr "其他裝置"

#: standalone/drakbackup:3103
#, c-format
msgid "Restore system"
msgstr "回存系統"

#: standalone/drakbackup:3104
#, c-format
msgid "Restore Users"
msgstr "回存使用者檔案"

#: standalone/drakbackup:3105
#, c-format
msgid "Restore Other"
msgstr "回存其他檔案"

#: standalone/drakbackup:3107
#, c-format
msgid "Select path to restore (instead of /)"
msgstr "選擇要回存的路徑名稱 (代替預設的 /)"

#: standalone/drakbackup:3111
#: standalone/drakbackup:3393
#, fuzzy, c-format
msgid "Path To Restore To"
msgstr "自訂回存方式"

#: standalone/drakbackup:3114
#, c-format
msgid "Do new backup before restore (only for incremental backups.)"
msgstr "在回存前進行新的備份動作 (只能夠用在遞增式備份時.)"

#: standalone/drakbackup:3116
#, c-format
msgid "Remove user directories before restore."
msgstr "在回存資料時先刪除使用者的相關目錄"

#: standalone/drakbackup:3201
#, c-format
msgid "Filename text substring to search for (empty string matches all):"
msgstr ""

#: standalone/drakbackup:3204
#, c-format
msgid "Search Backups"
msgstr "搜尋備份"

#: standalone/drakbackup:3222
#, c-format
msgid "No matches found..."
msgstr "找不到符合的..."

#: standalone/drakbackup:3226
#, fuzzy, c-format
msgid "Restore Selected"
msgstr ""
"回存選取項目\n"
"檔案"

#: standalone/drakbackup:3361
#, c-format
msgid ""
"Click date/time to see backup files.\n"
"Ctrl-Click files to select multiple files."
msgstr ""

#: standalone/drakbackup:3367
#, c-format
msgid ""
"Restore Selected\n"
"Catalog Entry"
msgstr ""

#: standalone/drakbackup:3376
#, c-format
msgid ""
"Restore Selected\n"
"Files"
msgstr ""
"回存選取項目\n"
"檔案"

#: standalone/drakbackup:3453
#, c-format
msgid "Backup files not found at %s."
msgstr "備份檔案找不到 - %s。"

#: standalone/drakbackup:3466
#, c-format
msgid "Restore From CD"
msgstr "使用光碟片回存"

#: standalone/drakbackup:3466
#, c-format
msgid ""
"Insert the CD with volume label %s\n"
" in the CD drive under mount point /mnt/cdrom"
msgstr ""
"請置入標籤名稱為 %s 的 CD 片到光碟機內\n"
"(掛載點為 /mnt/cdrom)"

#: standalone/drakbackup:3468
#, c-format
msgid "Not the correct CD label. Disk is labelled %s."
msgstr "不正確的 CD 片標籤, 磁碟標籤名稱為 %s。"

#: standalone/drakbackup:3478
#, c-format
msgid "Restore From Tape"
msgstr "使用磁帶回存"

#: standalone/drakbackup:3478
#, c-format
msgid ""
"Insert the tape with volume label %s\n"
" in the tape drive device %s"
msgstr ""
"請置入標籤名稱為 %s 的磁帶\n"
"到 %s 磁帶機內"

#: standalone/drakbackup:3480
#, c-format
msgid "Not the correct tape label. Tape is labelled %s."
msgstr "不正確的磁帶標籤, 磁帶標籤為 %s。"

#: standalone/drakbackup:3491
#, c-format
msgid "Restore Via Network"
msgstr "使用網路回存檔案"

#: standalone/drakbackup:3491
#, c-format
msgid "Restore Via Network Protocol: %s"
msgstr "網路回存使用的協定：%s"

#: standalone/drakbackup:3492
#, c-format
msgid "Host Name"
msgstr "主機名稱"

#: standalone/drakbackup:3493
#, c-format
msgid "Host Path or Module"
msgstr "主機路徑或是模組名稱"

#: standalone/drakbackup:3500
#, c-format
msgid "Password required"
msgstr "需要輸入密碼"

#: standalone/drakbackup:3506
#, c-format
msgid "Username required"
msgstr "需要輸入帳號名稱"

#: standalone/drakbackup:3509
#, c-format
msgid "Hostname required"
msgstr "需要輸入主機名稱"

#: standalone/drakbackup:3514
#, c-format
msgid "Path or Module required"
msgstr "需要輸入路徑或是模組名稱"

#: standalone/drakbackup:3527
#, c-format
msgid "Files Restored..."
msgstr "要回存的檔案..."

#: standalone/drakbackup:3530
#, c-format
msgid "Restore Failed..."
msgstr "回存失敗..."

#: standalone/drakbackup:3548
#, fuzzy, c-format
msgid "%s not retrieved..."
msgstr "%s 沒有正常回應"

#: standalone/drakbackup:3770
#: standalone/drakbackup:3839
#, c-format
msgid "Search for files to restore"
msgstr "搜尋檔案來回存"

#: standalone/drakbackup:3774
#, c-format
msgid "Restore all backups"
msgstr "回存所有備份資料"

#: standalone/drakbackup:3782
#, c-format
msgid "Custom Restore"
msgstr "自訂回存方式"

#: standalone/drakbackup:3786
#: standalone/drakbackup:3835
#, c-format
msgid "Restore From Catalog"
msgstr "使用型錄回存"

#: standalone/drakbackup:3807
#, c-format
msgid "Unable to find backups to restore...\n"
msgstr "無法找到備份以回存...\n"

#: standalone/drakbackup:3808
#, fuzzy, c-format
msgid "Verify that %s is the correct path"
msgstr "這樣子正確嗎？"

#: standalone/drakbackup:3809
#, c-format
msgid " and the CD is in the drive"
msgstr ""

#: standalone/drakbackup:3811
#, c-format
msgid "Backups on unmountable media - Use Catalog to restore"
msgstr ""

#: standalone/drakbackup:3827
#, c-format
msgid "CD in place - continue."
msgstr "CD 片就緒 - 繼續執行。"

#: standalone/drakbackup:3832
#, c-format
msgid "Browse to new restore repository."
msgstr ""

#: standalone/drakbackup:3833
#, fuzzy, c-format
msgid "Directory To Restore From"
msgstr "使用光碟片回存"

#: standalone/drakbackup:3869
#, c-format
msgid "Restore Progress"
msgstr "回存進度"

#: standalone/drakbackup:3980
#, c-format
msgid "Build Backup"
msgstr "建立備份"

#: standalone/drakbackup:4013
#: standalone/drakbackup:4333
#, c-format
msgid "Restore"
msgstr "回存"

#: standalone/drakbackup:4101
#, fuzzy, c-format
msgid "The following packages need to be installed:\n"
msgstr "下列的套件將會被安裝上"

#: standalone/drakbackup:4128
#, c-format
msgid "Please select data to restore..."
msgstr "請選取要回存的資料..."

#: standalone/drakbackup:4168
#, c-format
msgid "Backup system files"
msgstr "備份系統檔案"

#: standalone/drakbackup:4171
#, c-format
msgid "Backup user files"
msgstr "備份使用者檔案"

#: standalone/drakbackup:4174
#, c-format
msgid "Backup other files"
msgstr "備份其他檔案"

#: standalone/drakbackup:4177
#: standalone/drakbackup:4211
#, c-format
msgid "Total Progress"
msgstr "全部進度"

#: standalone/drakbackup:4203
#, fuzzy, c-format
msgid "Sending files by FTP"
msgstr "正在送出檔案..."

#: standalone/drakbackup:4206
#, c-format
msgid "Sending files..."
msgstr "正在送出檔案..."

#: standalone/drakbackup:4276
#, c-format
msgid "Backup Now from configuration file"
msgstr "依據目前組態設定開始備份"

#: standalone/drakbackup:4281
#, c-format
msgid "View Backup Configuration."
msgstr "檢視備份組態設定"

#: standalone/drakbackup:4307
#, c-format
msgid "Wizard Configuration"
msgstr "精靈設定模式"

#: standalone/drakbackup:4312
#, c-format
msgid "Advanced Configuration"
msgstr "進階設定"

#: standalone/drakbackup:4317
#, fuzzy, c-format
msgid "View Configuration"
msgstr "組態設定"

#: standalone/drakbackup:4321
#, c-format
msgid "View Last Log"
msgstr "查看最新紀錄"

#: standalone/drakbackup:4326
#, c-format
msgid "Backup Now"
msgstr "立即備份"

#: standalone/drakbackup:4330
#, c-format
msgid ""
"No configuration file found \n"
"please click Wizard or Advanced."
msgstr ""
"尚未產生組態設定檔案, 請點選\n"
"巫師或者是進階模式建立之。"

#: standalone/drakbackup:4350
#: standalone/drakbackup:4353
#, c-format
msgid "Drakbackup"
msgstr "Drakbackup"

#: standalone/drakboot:64
#, fuzzy, c-format
msgid "Graphical boot theme selection"
msgstr "印表機型號選擇"

#: standalone/drakboot:64
#, c-format
msgid "System mode"
msgstr "系統模式"

#: standalone/drakboot:74
#: standalone/drakfloppy:47
#: standalone/harddrake2:187
#: standalone/harddrake2:188
#: standalone/logdrake:70
#: standalone/printerdrake:138
#: standalone/printerdrake:139
#: standalone/printerdrake:140
#, c-format
msgid "/_File"
msgstr "/檔案 (_F)"

#: standalone/drakboot:75
#: standalone/drakfloppy:48
#: standalone/logdrake:76
#, c-format
msgid "/File/_Quit"
msgstr "/檔案 (F)/結束 (_Q)"

#: standalone/drakboot:75
#: standalone/drakfloppy:48
#: standalone/harddrake2:188
#: standalone/logdrake:76
#: standalone/printerdrake:140
#, c-format
msgid "<control>Q"
msgstr "<control>Q"

#: standalone/drakboot:148
#, c-format
msgid "Install themes"
msgstr "安裝佈景"

#: standalone/drakboot:149
#, c-format
msgid "Create new theme"
msgstr "建立新的佈景"

#: standalone/drakboot:161
#, c-format
msgid "Use graphical boot"
msgstr "使用圖形化開機畫面"

#: standalone/drakboot:166
#, c-format
msgid "Your system bootloader is not in framebuffer mode. To activate graphical boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""

#: standalone/drakboot:167
#, fuzzy, c-format
msgid "Do you want to configure it now?"
msgstr "您想要測試您的設定值嗎？"

#: standalone/drakboot:177
#, c-format
msgid "Theme"
msgstr "佈景檔"

#: standalone/drakboot:180
#, c-format
msgid ""
"Display theme\n"
"under console"
msgstr ""
"在 console\n"
"顯示佈景"

#: standalone/drakboot:189
#, c-format
msgid "Launch the graphical environment when your system starts"
msgstr "開機時啟動 X Window 圖形作業環境"

#: standalone/drakboot:197
#, c-format
msgid "No, I do not want autologin"
msgstr "不，我不需要自動登入 (AutoLogin)"

#: standalone/drakboot:198
#, c-format
msgid "Yes, I want autologin with this (user, desktop)"
msgstr "是的，我要用這個 (使用者、桌面) 來自動登入"

#: standalone/drakboot:201
#, c-format
msgid "Default user"
msgstr "預設使用者"

#: standalone/drakboot:202
#, c-format
msgid "Default desktop"
msgstr "預設桌面"

#: standalone/drakboot:310
#, c-format
msgid ""
"Please choose a video mode, it will be applied to each of the boot entries selected below.\n"
"Be sure your video card supports the mode you choose."
msgstr ""

#: standalone/drakbug:41
#, c-format
msgid "Mandrakelinux Bug Report Tool"
msgstr "Mandrakelinux 臭蟲回報工具"

#: standalone/drakbug:46
#, c-format
msgid "Mandrakelinux Control Center"
msgstr "Mandrakelinux 控制中心"

#: standalone/drakbug:48
#, c-format
msgid "Synchronization tool"
msgstr "同步工具"

#: standalone/drakbug:49
#: standalone/drakbug:63
#: standalone/drakbug:148
#: standalone/drakbug:150
#: standalone/drakbug:154
#, c-format
msgid "Standalone Tools"
msgstr "單一工具"

#: standalone/drakbug:50
#, c-format
msgid "HardDrake"
msgstr "HardDrake 硬體偵測設定"

#: standalone/drakbug:51
#, c-format
msgid "Mandrakeonline"
msgstr "Mandrakeonline 線上服務"

#: standalone/drakbug:52
#, c-format
msgid "Menudrake"
msgstr "Mandrake 選單編輯器"

#: standalone/drakbug:53
#, c-format
msgid "Msec"
msgstr "Msec 安全設定偵測"

#: standalone/drakbug:54
#, c-format
msgid "Remote Control"
msgstr "遠端印表機"

#: standalone/drakbug:55
#, c-format
msgid "Software Manager"
msgstr "套件管理程式"

#: standalone/drakbug:56
#, c-format
msgid "Urpmi"
msgstr "Urpmi 套件管理"

#: standalone/drakbug:57
#, c-format
msgid "Windows Migration tool"
msgstr "Windows 整合工具"

#: standalone/drakbug:58
#, c-format
msgid "Userdrake"
msgstr "Userdrake 使用者管理"

#: standalone/drakbug:59
#, c-format
msgid "Configuration Wizards"
msgstr "設定巫師"

#: standalone/drakbug:81
#, c-format
msgid "Select Mandrakesoft Tool:"
msgstr ""

#: standalone/drakbug:82
#, c-format
msgid ""
"or Application Name\n"
"(or Full Path):"
msgstr ""

#: standalone/drakbug:85
#, c-format
msgid "Find Package"
msgstr "搜尋套件"

#: standalone/drakbug:87
#, c-format
msgid "Package: "
msgstr "套件： "

#: standalone/drakbug:88
#, c-format
msgid "Kernel:"
msgstr "核心："

#: standalone/drakbug:100
#, fuzzy, c-format
msgid ""
"To submit a bug report, click on the report button.  \n"
"This will open a web browser window on %s where you'll find a form to fill in.  The information displayed above will be transferred to that server.  \n"
"Things useful to include in your report are the output of lspci, kernel version, and /proc/cpuinfo."
msgstr ""
"要回報任何臭蟲問題, 請點選回報的按鈕.\n"
"這將會開啟瀏覽器於 %s\n"
" 其中你將找到一表格填入. 以上顯示的資訊將 會\n"
"被傳送到那伺服器."

#: standalone/drakbug:106
#, c-format
msgid "Report"
msgstr "回報"

#: standalone/drakbug:163
#, c-format
msgid "Not installed"
msgstr "尚未安裝"

#: standalone/drakbug:175
#, fuzzy, c-format
msgid "Package not installed"
msgstr "尚未安裝"

#: standalone/drakclock:29
#, c-format
msgid "DrakClock"
msgstr "DrakClock"

#: standalone/drakclock:39
#, fuzzy, c-format
msgid "not defined"
msgstr "重新設定"

#: standalone/drakclock:41
#, fuzzy, c-format
msgid "Change Time Zone"
msgstr "時區"

#: standalone/drakclock:45
#, c-format
msgid "Timezone - DrakClock"
msgstr "時區 - DakClock"

#: standalone/drakclock:47
#, c-format
msgid "GMT - DrakClock"
msgstr "GMT - DrakClock"

#: standalone/drakclock:47
#, c-format
msgid "Is your hardware clock set to GMT?"
msgstr "硬體時鐘設定為 GMT 時間嗎?"

#: standalone/drakclock:75
#, fuzzy, c-format
msgid "Network Time Protocol"
msgstr "網路介面"

#: standalone/drakclock:77
#, c-format
msgid ""
"Your computer can synchronize its clock\n"
" with a remote time server using NTP"
msgstr ""

#: standalone/drakclock:78
#, fuzzy, c-format
msgid "Enable Network Time Protocol"
msgstr "網路回存使用的協定：%s"

#: standalone/drakclock:86
#, c-format
msgid "Server:"
msgstr "伺服器"

#: standalone/drakclock:124
#, c-format
msgid "Could not synchronize with %s."
msgstr ""

#: standalone/drakclock:146
#: standalone/drakclock:156
#, c-format
msgid "Reset"
msgstr "重設"

#: standalone/drakclock:224
#, fuzzy, c-format
msgid ""
"We need to install ntp package\n"
" to enable Network Time Protocol\n"
"\n"
"Do you want to install ntp?"
msgstr "這個 %s 套件需要安裝上, 您要安裝該套件嗎？"

#: standalone/drakconnect:85
#, c-format
msgid "Network configuration (%d adapters)"
msgstr "網路組態 (%d 介面卡)"

#: standalone/drakconnect:96
#: standalone/drakconnect:786
#, c-format
msgid "Gateway:"
msgstr "閘道器："

#: standalone/drakconnect:96
#: standalone/drakconnect:786
#, c-format
msgid "Interface:"
msgstr "介面:"

#: standalone/drakconnect:100
#: standalone/net_monitor:122
#, c-format
msgid "Wait please"
msgstr "請稍後"

#: standalone/drakconnect:116
#, c-format
msgid "Interface"
msgstr "介面"

#: standalone/drakconnect:116
#: standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "State"
msgstr "狀態"

#: standalone/drakconnect:133
#, c-format
msgid "Hostname: "
msgstr "主機名稱："

#: standalone/drakconnect:135
#, c-format
msgid "Configure hostname..."
msgstr "設定主機名稱..."

#: standalone/drakconnect:149
#: standalone/drakconnect:842
#, c-format
msgid "LAN configuration"
msgstr "區域網路設定"

#: standalone/drakconnect:154
#, c-format
msgid "Configure Local Area Network..."
msgstr "設定區域網路..."

#: standalone/drakconnect:162
#: standalone/drakconnect:246
#: standalone/drakconnect:250
#, c-format
msgid "Apply"
msgstr "套用"

#: standalone/drakconnect:197
#, c-format
msgid "Manage connections"
msgstr "管理連線"

#: standalone/drakconnect:224
#, fuzzy, c-format
msgid "Device selected"
msgstr "移除選取項目"

#: standalone/drakconnect:305
#, fuzzy, c-format
msgid "IP configuration"
msgstr "CUPS 設定組態"

#: standalone/drakconnect:344
#, fuzzy, c-format
msgid "DNS servers"
msgstr "DNS 伺服器"

#: standalone/drakconnect:352
#, fuzzy, c-format
msgid "Search Domain"
msgstr "NIS 域名"

#: standalone/drakconnect:360
#, fuzzy, c-format
msgid "static"
msgstr "自動分配 IP"

#: standalone/drakconnect:360
#, c-format
msgid "DHCP"
msgstr "DHCP"

#: standalone/drakconnect:470
#, fuzzy, c-format
msgid "Metric"
msgstr "限制"

#: standalone/drakconnect:493
#, c-format
msgid "Flow control"
msgstr "流量控制"

#: standalone/drakconnect:494
#, fuzzy, c-format
msgid "Line termination"
msgstr "Internet 平台"

#: standalone/drakconnect:505
#, fuzzy, c-format
msgid "Modem timeout"
msgstr "核心啟動時間逾時時間"

#: standalone/drakconnect:509
#, fuzzy, c-format
msgid "Use lock file"
msgstr "選擇檔案"

#: standalone/drakconnect:511
#, c-format
msgid "Wait for dialup tone before dialing"
msgstr ""

#: standalone/drakconnect:514
#, fuzzy, c-format
msgid "Busy wait"
msgstr "科威特"

#: standalone/drakconnect:519
#, fuzzy, c-format
msgid "Modem sound"
msgstr "型號"

#: standalone/drakconnect:520
#, c-format
msgid "Enable"
msgstr "啟動"

#: standalone/drakconnect:520
#, c-format
msgid "Disable"
msgstr "不啟用"

#: standalone/drakconnect:571
#: standalone/harddrake2:48
#, c-format
msgid "Media class"
msgstr "媒介類別"

#: standalone/drakconnect:572
#: standalone/drakfloppy:136
#, c-format
msgid "Module name"
msgstr "模組名稱"

#: standalone/drakconnect:573
#, c-format
msgid "Mac Address"
msgstr " MAC 位址"

#: standalone/drakconnect:574
#: standalone/harddrake2:26
#: standalone/harddrake2:118
#, c-format
msgid "Bus"
msgstr "匯流排"

#: standalone/drakconnect:575
#: standalone/harddrake2:32
#, c-format
msgid "Location on the bus"
msgstr "匯流排上的位置"

#: standalone/drakconnect:671
#: standalone/drakgw:247
#: standalone/drakpxe:138
#, c-format
msgid "No ethernet network adapter has been detected on your system. Please run the hardware configuration tool."
msgstr "您系統偵測不到有網路卡的存在，請重新執行硬體設定工具。"

#: standalone/drakconnect:679
#, fuzzy, c-format
msgid "Remove a network interface"
msgstr "選取網路介面"

#: standalone/drakconnect:683
#, fuzzy, c-format
msgid "Select the network interface to remove:"
msgstr "選取網路介面"

#: standalone/drakconnect:715
#, fuzzy, c-format
msgid ""
"An error occurred while deleting the \"%s\" network interface:\n"
"\n"
"%s"
msgstr ""
"重新啟動網路時發生了下面的錯誤：\n"
"\n"
"%s"

#: standalone/drakconnect:716
#, c-format
msgid "Congratulations, the \"%s\" network interface has been successfully deleted"
msgstr ""

#: standalone/drakconnect:732
#, c-format
msgid "No IP"
msgstr "沒有 IP"

#: standalone/drakconnect:733
#, c-format
msgid "No Mask"
msgstr "沒有遮罩"

#: standalone/drakconnect:734
#: standalone/drakconnect:913
#, c-format
msgid "up"
msgstr ""

#: standalone/drakconnect:734
#: standalone/drakconnect:913
#, fuzzy, c-format
msgid "down"
msgstr "完成"

#: standalone/drakconnect:776
#: standalone/net_monitor:470
#, c-format
msgid "Connected"
msgstr "已連線"

#: standalone/drakconnect:776
#: standalone/net_monitor:470
#, c-format
msgid "Not connected"
msgstr "尚未連線"

#: standalone/drakconnect:778
#, c-format
msgid "Disconnect..."
msgstr "斷線..."

#: standalone/drakconnect:778
#, c-format
msgid "Connect..."
msgstr "連線..."

#: standalone/drakconnect:807
#, c-format
msgid "Warning, another Internet connection has been detected, maybe using your network"
msgstr "警告，偵測到其他的網路連線，也許對方正在使用您的網路"

#: standalone/drakconnect:838
#, c-format
msgid "Deactivate now"
msgstr "立即關閉"

#: standalone/drakconnect:838
#, c-format
msgid "Activate now"
msgstr "立即啟動"

#: standalone/drakconnect:846
#, c-format
msgid ""
"You do not have any configured interface.\n"
"Configure them first by clicking on 'Configure'"
msgstr ""
"您還沒有任何已經設定好的網路介面。\n"
"請點選設定來進行網路介面設定動作"

#: standalone/drakconnect:860
#, c-format
msgid "LAN Configuration"
msgstr "區域網路設定"

#: standalone/drakconnect:872
#, c-format
msgid "Adapter %s: %s"
msgstr "介面卡 %s： %s"

#: standalone/drakconnect:881
#, c-format
msgid "Boot Protocol"
msgstr "通訊協定"

#: standalone/drakconnect:882
#, c-format
msgid "Started on boot"
msgstr "於開機時啟動"

#: standalone/drakconnect:918
#, fuzzy, c-format
msgid ""
"This interface has not been configured yet.\n"
"Run the \"Add an interface\" assistant from the Mandrakelinux Control Center"
msgstr "網路介面尚未設定, 請執行設定巫師"

#. -PO: here "Add Connection" should be translated the same was as in control-center
#: standalone/drakconnect:973
#: standalone/net_applet:50
#, c-format
msgid ""
"You do not have any configured Internet connection.\n"
"Run the \"%s\" assistant from the Mandrakelinux Control Center"
msgstr ""
"您沒有任何已設定好的網路連線。\n"
"請由 Mandrakelinux 控制中心啟動 \"%s\" 設定精靈"

#: standalone/drakconnect:974
#: standalone/net_applet:51
#, c-format
msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
msgstr "設定一個新的網路介面 (區域網路、ISDN、ADSL、...)"

#: standalone/drakconnect:981
#, c-format
msgid "Internet connection configuration"
msgstr "網際網路連線設定"

#: standalone/drakconnect:999
#, c-format
msgid "Third DNS server (optional)"
msgstr "第三台 DNS 伺服器 (可不輸入)"

#: standalone/drakconnect:1021
#, c-format
msgid "Internet Connection Configuration"
msgstr "網際網路連線設定"

#: standalone/drakconnect:1022
#, c-format
msgid "Internet access"
msgstr "網際網路存取"

#: standalone/drakconnect:1024
#: standalone/net_monitor:101
#, c-format
msgid "Connection type: "
msgstr "連線項目： "

#: standalone/drakconnect:1027
#, c-format
msgid "Status:"
msgstr "狀態："

#: standalone/drakedm:34
#, c-format
msgid "GDM (GNOME Display Manager)"
msgstr "GDM (GNOME 登入管理員)"

#: standalone/drakedm:35
#, c-format
msgid "KDM (KDE Display Manager)"
msgstr "KDM (KDE 登入管理員)"

#: standalone/drakedm:36
#, c-format
msgid "MdkKDM (Mandrakelinux Display Manager)"
msgstr "MdkKDM (Mandrakelinux 登入管理員)"

#: standalone/drakedm:37
#, c-format
msgid "XDM (X Display Manager)"
msgstr "XDM (X 環境登入管理員)"

#: standalone/drakedm:55
#, c-format
msgid "Choosing a display manager"
msgstr "選擇一個登入管理員"

#: standalone/drakedm:56
#, c-format
msgid ""
"X11 Display Manager allows you to graphically log\n"
"into your system with the X Window System running and supports running\n"
"several different X sessions on your local machine at the same time."
msgstr ""

#: standalone/drakedm:79
#, c-format
msgid "The change is done, do you want to restart the dm service?"
msgstr "改變完成，您要重新啟動 dm 服務嗎？"

#: standalone/drakedm:80
#, c-format
msgid "You are going to close all running programs and lose your current session. Are you really sure that you want to restart the dm service?"
msgstr ""

#: standalone/drakfloppy:41
#, c-format
msgid "drakfloppy"
msgstr "drakfloppy"

#: standalone/drakfloppy:78
#, c-format
msgid "Boot disk creation"
msgstr "製作開機片"

#: standalone/drakfloppy:79
#, c-format
msgid "General"
msgstr "一般"

#: standalone/drakfloppy:82
#: standalone/harddrake2:145
#, c-format
msgid "Device"
msgstr "裝置"

#: standalone/drakfloppy:88
#, c-format
msgid "Kernel version"
msgstr "核心版本"

#: standalone/drakfloppy:103
#, c-format
msgid "Preferences"
msgstr "偏好設定"

#: standalone/drakfloppy:117
#, c-format
msgid "Advanced preferences"
msgstr "進階選項"

#: standalone/drakfloppy:136
#, c-format
msgid "Size"
msgstr "大小"

#: standalone/drakfloppy:139
#, fuzzy, c-format
msgid "Mkinitrd optional arguments"
msgstr "mkinitrd 選項"

#: standalone/drakfloppy:141
#, c-format
msgid "force"
msgstr "強迫"

#: standalone/drakfloppy:142
#, c-format
msgid "omit raid modules"
msgstr "省略 raid 模組"

#: standalone/drakfloppy:143
#, c-format
msgid "if needed"
msgstr "若需要的話"

#: standalone/drakfloppy:144
#, c-format
msgid "omit scsi modules"
msgstr "省略 scsi 模組"

#: standalone/drakfloppy:147
#, c-format
msgid "Add a module"
msgstr "新增模組"

#: standalone/drakfloppy:156
#, c-format
msgid "Remove a module"
msgstr "移除一模組"

#: standalone/drakfloppy:291
#, c-format
msgid "Be sure a media is present for the device %s"
msgstr "請確定裝置 %s 內已放入磁碟片"

#: standalone/drakfloppy:297
#, c-format
msgid ""
"There is no medium or it is write-protected for device %s.\n"
"Please insert one."
msgstr ""
"在裝置 %s 內找不到磁碟片或它具有防寫保護。\n"
"請放入一張磁碟片。"

#: standalone/drakfloppy:300
#, c-format
msgid "Unable to fork: %s"
msgstr "無法建立另一行程：%s"

#: standalone/drakfloppy:303
#, fuzzy, c-format
msgid "Floppy creation completed"
msgstr "連線速度"

#: standalone/drakfloppy:303
#, c-format
msgid "The creation of the boot floppy has been successfully completed \n"
msgstr "開機片已經成功的建立了\n"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/drakfloppy:308
#, fuzzy, c-format
msgid ""
"Unable to properly close mkbootdisk:\n"
"\n"
"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
"無法正常關閉 mkbootdisk：\n"
" %s\n"
" %s"

#: standalone/drakfont:182
#, c-format
msgid "Search installed fonts"
msgstr "尋找已安裝字型"

#: standalone/drakfont:184
#, c-format
msgid "Unselect fonts installed"
msgstr "反向選取已安裝字型"

#: standalone/drakfont:207
#, c-format
msgid "parse all fonts"
msgstr "解析所有字型"

#: standalone/drakfont:209
#, c-format
msgid "No fonts found"
msgstr "找不到字型"

#: standalone/drakfont:217
#: standalone/drakfont:257
#: standalone/drakfont:324
#: standalone/drakfont:357
#: standalone/drakfont:365
#: standalone/drakfont:391
#: standalone/drakfont:409
#: standalone/drakfont:423
#, c-format
msgid "done"
msgstr "完成"

#: standalone/drakfont:222
#, c-format
msgid "Could not find any font in your mounted partitions"
msgstr "在已經掛載的分割區內找不到任何字型"

#: standalone/drakfont:255
#, c-format
msgid "Reselect correct fonts"
msgstr "重新選取正確的字型"

#: standalone/drakfont:258
#, c-format
msgid "Could not find any font.\n"
msgstr "找不到任何字型。\n"

#: standalone/drakfont:268
#, c-format
msgid "Search for fonts in installed list"
msgstr "於已安裝清單內搜尋字型"

#: standalone/drakfont:293
#, fuzzy, c-format
msgid "%s fonts conversion"
msgstr "pfm 字型轉換"

#: standalone/drakfont:322
#, c-format
msgid "Fonts copy"
msgstr "字型複製"

#: standalone/drakfont:325
#, c-format
msgid "True Type fonts installation"
msgstr "True Type 字體檔安裝"

#: standalone/drakfont:332
#, c-format
msgid "please wait during ttmkfdir..."
msgstr "請稍候，執行 ttmkfdir 程式中..."

#: standalone/drakfont:333
#, c-format
msgid "True Type install done"
msgstr "True Type 字體安裝完成"

#: standalone/drakfont:339
#: standalone/drakfont:354
#, c-format
msgid "type1inst building"
msgstr ""

#: standalone/drakfont:348
#, c-format
msgid "Ghostscript referencing"
msgstr ""

#: standalone/drakfont:358
#, c-format
msgid "Suppress Temporary Files"
msgstr "不刪除暫存檔案"

#: standalone/drakfont:361
#, c-format
msgid "Restart XFS"
msgstr "重新啟動 XFS 服務"

#: standalone/drakfont:407
#: standalone/drakfont:417
#, c-format
msgid "Suppress Fonts Files"
msgstr "不刪除字型檔"

#: standalone/drakfont:419
#, c-format
msgid "xfs restart"
msgstr "XFS 服務重新啟動"

#: standalone/drakfont:427
#, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
"\n"
"-You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
msgstr ""
"進行安裝字型前, 請務必確認您有適當的權限能夠存取使用, \n"
"其中包含這些字型都是正確沒錯誤的。要不然, 極端情況下, \n"
"您的 X 伺服器可能會因為不正確的字型檔案而不預期結束。"

#: standalone/drakfont:476
#: standalone/drakfont:485
#, c-format
msgid "DrakFont"
msgstr "DrakFont"

#: standalone/drakfont:486
#, c-format
msgid "Font List"
msgstr "字型清單"

#: standalone/drakfont:492
#, c-format
msgid "About"
msgstr "關於"

#: standalone/drakfont:494
#: standalone/drakfont:692
#: standalone/drakfont:730
#, c-format
msgid "Uninstall"
msgstr "移除"

#: standalone/drakfont:495
#, c-format
msgid "Import"
msgstr "匯入"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakfont:513
#, c-format
msgid ""
"Copyright (C) 2001-2002 by Mandrakesoft \n"
"\n"
"\n"
"       DUPONT Sebastien (original version)\n"
"\n"
"       CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
"\n"
"       VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""

#: standalone/drakfont:522
#, c-format
msgid ""
"This program is free software; you can redistribute it and/or modify\n"
" it under the terms of the GNU General Public License as published by\n"
" the Free Software Foundation; either version 2, or (at your option)\n"
" any later version.\n"
"\n"
"\n"
" This program is distributed in the hope that it will be useful,\n"
" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
" GNU General Public License for more details.\n"
"\n"
"\n"
" You should have received a copy of the GNU General Public License\n"
" along with this program; if not, write to the Free Software\n"
" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""

#: standalone/drakfont:538
#, c-format
msgid ""
"Thanks:\n"
"\n"
"    -  pfm2afm:   \n"
"\t by Ken Borgendale:\n"
"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
"\n"
"    -  type1inst:\n"
"\t by James Macnicol: \n"
"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
"\n"
"    -  ttf2pt1:   \n"
"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
"             Convert ttf font files to afm and pfb fonts\n"
msgstr ""

#: standalone/drakfont:557
#, c-format
msgid "Choose the applications that will support the fonts:"
msgstr "選擇能夠使用該字體的應用程式："

#: standalone/drakfont:558
#, fuzzy, c-format
msgid ""
"Before installing any fonts, be sure that you have the right to use and install them on your system.\n"
"\n"
"You can install the fonts the normal way. In rare cases, bogus fonts may hang up your X Server."
msgstr ""
"進行安裝字型前, 請務必確認您有適當的權限能夠存取使用, \n"
"其中包含這些字型都是正確沒錯誤的。要不然, 極端情況下, \n"
"您的 X 伺服器可能會因為不正確的字型檔案而不預期結束。"

#: standalone/drakfont:568
#, c-format
msgid "Ghostscript"
msgstr "GhostScript"

#: standalone/drakfont:569
#, c-format
msgid "StarOffice"
msgstr "StarOffice"

#: standalone/drakfont:570
#, c-format
msgid "Abiword"
msgstr "Abiword"

#: standalone/drakfont:571
#, c-format
msgid "Generic Printers"
msgstr "一般印表機"

#: standalone/drakfont:587
#, c-format
msgid "Select the font file or directory and click on 'Add'"
msgstr "選取字型檔案或者是所在目錄, 點選 '加入'"

#: standalone/drakfont:588
#, c-format
msgid "File Selection"
msgstr "檔案選取"

#: standalone/drakfont:604
#, fuzzy, c-format
msgid "You've not selected any font"
msgstr "找不到任何字型。\n"

#: standalone/drakfont:657
#, fuzzy, c-format
msgid "Import fonts"
msgstr "字型匯入"

#: standalone/drakfont:662
#, fuzzy, c-format
msgid "Install fonts"
msgstr "移除字型"

#: standalone/drakfont:697
#, c-format
msgid "click here if you are sure."
msgstr "確定的話請點選這裡"

#: standalone/drakfont:699
#, c-format
msgid "here if no."
msgstr "不確定點選這裡"

#: standalone/drakfont:738
#, c-format
msgid "Unselected All"
msgstr "取消選取所有項目"

#: standalone/drakfont:741
#, c-format
msgid "Selected All"
msgstr "選取所有項目"

#: standalone/drakfont:744
#, c-format
msgid "Remove List"
msgstr "移除清單"

#: standalone/drakfont:755
#: standalone/drakfont:774
#, fuzzy, c-format
msgid "Importing fonts"
msgstr "字型匯入"

#: standalone/drakfont:759
#: standalone/drakfont:779
#, c-format
msgid "Initial tests"
msgstr "初始測試"

#: standalone/drakfont:760
#, c-format
msgid "Copy fonts on your system"
msgstr "複製字體至系統"

#: standalone/drakfont:761
#, c-format
msgid "Install & convert Fonts"
msgstr "安裝與轉換字體"

#: standalone/drakfont:762
#, c-format
msgid "Post Install"
msgstr "後續安裝設定"

#: standalone/drakfont:780
#, c-format
msgid "Remove fonts on your system"
msgstr "由您的系統移除該字體檔案"

#: standalone/drakfont:781
#, c-format
msgid "Post Uninstall"
msgstr "後續反安裝設定"

#: standalone/drakgw:58
#: standalone/drakgw:191
#, c-format
msgid "Internet Connection Sharing"
msgstr "Internet 連線分享"

#: standalone/drakgw:111
#: standalone/drakvpn:51
#, fuzzy, c-format
msgid "Sorry, we support only 2.4 and above kernels."
msgstr "抱歉, 目前只有支援使用 2.4 的核心版本。"

#: standalone/drakgw:122
#, c-format
msgid "Internet Connection Sharing currently disabled"
msgstr "Internet 連線共享目前關閉了。"

#: standalone/drakgw:123
#, fuzzy, c-format
msgid ""
"The setup of Internet connection sharing has already been done.\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"Internet 連線共享已經設定完成了。目前是處於關閉不使用狀態。\n"
"\n"
"您希望要處理那個？"

#: standalone/drakgw:127
#: standalone/drakvpn:127
#, c-format
msgid "enable"
msgstr "開啟"

#: standalone/drakgw:127
#: standalone/drakgw:154
#: standalone/drakvpn:101
#: standalone/drakvpn:127
#, c-format
msgid "reconfigure"
msgstr "重新設定"

#: standalone/drakgw:127
#: standalone/drakgw:154
#: standalone/drakvpn:101
#: standalone/drakvpn:127
#: standalone/drakvpn:376
#: standalone/drakvpn:735
#, c-format
msgid "dismiss"
msgstr "取消"

#: standalone/drakgw:134
#, c-format
msgid "Enabling servers..."
msgstr "啟用伺服器中..."

#: standalone/drakgw:146
#, c-format
msgid "Internet Connection Sharing is now enabled."
msgstr "Internet 連線工想目前開啟了。"

#: standalone/drakgw:149
#, c-format
msgid "Internet Connection Sharing currently enabled"
msgstr "Internet 連線分享目前處於可用狀態"

#: standalone/drakgw:150
#, c-format
msgid ""
"The setup of Internet Connection Sharing has already been done.\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"目前 Internet 連線分享的設定已經完成了.. 目前已經可用了..\n"
"您目前打算要做什麼呢？"

#: standalone/drakgw:154
#: standalone/drakvpn:101
#, c-format
msgid "disable"
msgstr "關閉"

#: standalone/drakgw:157
#, c-format
msgid "Disabling servers..."
msgstr "正在關閉伺服器..."

#: standalone/drakgw:172
#, c-format
msgid "Internet Connection Sharing is now disabled."
msgstr "Internet 連線共享目前關閉了。"

#: standalone/drakgw:192
#, c-format
msgid ""
"You are about to configure your computer to share its Internet connection.\n"
"With that feature, other computers on your local network will be able to use this computer's Internet connection.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
msgstr ""
"目前要進行Internet連線分享的設定, 這個功能能夠\n"
"讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
"連上 Internet。請注意: 您需要另外一張網路卡以便\n"
"於提供區域網路電腦連線存取分享使用。"

#: standalone/drakgw:236
#, c-format
msgid "Interface %s (using module %s)"
msgstr "介面 %s (使用 %s 模組)"

#: standalone/drakgw:237
#, c-format
msgid "Interface %s"
msgstr "介面 %s"

#: standalone/drakgw:246
#: standalone/drakpxe:137
#, c-format
msgid "No network adapter on your system!"
msgstr "您系統並沒有網路卡存在"

#: standalone/drakgw:253
#, c-format
msgid "Network interface"
msgstr "網路介面"

#: standalone/drakgw:254
#, c-format
msgid ""
"There is only one configured network adapter on your system:\n"
"\n"
"%s\n"
"\n"
"I am about to setup your Local Area Network with that adapter."
msgstr ""
"您的系統目前有一張已經設定好的網路卡:\n"
"\n"
"%s\n"
"\n"
"現在要進行這張網路卡與區域網路的連線組態設定。"

#: standalone/drakgw:260
#: standalone/drakpxe:142
#, c-format
msgid "Choose the network interface"
msgstr "選取網路介面"

#: standalone/drakgw:261
#, c-format
msgid "Please choose what network adapter will be connected to your Local Area Network."
msgstr "請選擇要連線到區域網路內的網路卡。"

#: standalone/drakgw:290
#, c-format
msgid "Network interface already configured"
msgstr "網路介面已經設定完成"

#: standalone/drakgw:291
#, c-format
msgid ""
"Warning, the network adapter (%s) is already configured.\n"
"\n"
"Do you want an automatic re-configuration?\n"
"\n"
"You can do it manually but you need to know what you're doing."
msgstr ""
"警告, 系統網路卡介面 (%s) 已經設定過了。\n"
"\n"
"您確定要自動重新設定過？\n"
"\n"
"如果您有特殊需求, 可以選擇手動方式設定。"

#: standalone/drakgw:296
#, c-format
msgid "Automatic reconfiguration"
msgstr "自動重新設定"

#: standalone/drakgw:296
#, c-format
msgid "No (experts only)"
msgstr ""

#: standalone/drakgw:297
#, c-format
msgid "Show current interface configuration"
msgstr "顯示目前網路介面組態設定"

#: standalone/drakgw:298
#, c-format
msgid "Current interface configuration"
msgstr "目前介面組態設定"

#: standalone/drakgw:299
#, c-format
msgid ""
"Current configuration of `%s':\n"
"\n"
"Network: %s\n"
"IP address: %s\n"
"IP attribution: %s\n"
"Driver: %s"
msgstr ""
"目前 '%s' 的組態設定:\n"
"\n"
"網路: %s\n"
"IP 位址： %s\n"
"IP 屬性：%s\n"
"驅動程式： %s"

#: standalone/drakgw:312
#, c-format
msgid ""
"I can keep your current configuration and assume you already set up a DHCP server; in that case please verify I correctly read the Network that you use for your local network; I will not reconfigure it and I will not touch your DHCP server configuration.\n"
"\n"
"The default DNS entry is the Caching Nameserver configured on the firewall. You can replace that with your ISP DNS IP, for example.\n"
"\t\t      \n"
"Otherwise, I can reconfigure your interface and (re)configure a DHCP server for you.\n"
"\n"
msgstr ""
"設定程式已經紀錄了目前的組態設定資訊, 並假設您已經設定好了\n"
"DHCP 服務；接下來請確認設定程式能夠正確取的您區域網路資訊；\n"
"如果設定程式無法正確取得 DHCP 服務組態的話, 相關設定將不會繼續。\n"
"\n"
"沒問題的話, 安裝程式將會重新設定您的網路介面, 設定由 DHCP 主機\n"
"取得IP資訊。\n"
"\n"

#: standalone/drakgw:319
#, c-format
msgid "Local Network adress"
msgstr "內部網路IP位址"

#: standalone/drakgw:323
#, fuzzy, c-format
msgid ""
"DHCP Server Configuration.\n"
"\n"
"Here you can select different options for the DHCP server configuration.\n"
"If you do not know the meaning of an option, simply leave it as it is."
msgstr ""
"DHCP 伺服器設定。\n"
"\n"
"您可以在這邊選擇設定 DHCP 的相關組態設定。\n"
"如果您不清楚相關參數的意思, 您可以為持空白不要輸入資料。\n"
"\n"

#: standalone/drakgw:327
#, c-format
msgid "(This) DHCP Server IP"
msgstr "該 DHCP 主機 IP"

#: standalone/drakgw:328
#, c-format
msgid "The DNS Server IP"
msgstr "該 DHCP 主機 IP"

#: standalone/drakgw:329
#, c-format
msgid "The internal domain name"
msgstr "內部網域的名稱"

#: standalone/drakgw:330
#, c-format
msgid "The DHCP start range"
msgstr "DHCP 起始範圍"

#: standalone/drakgw:331
#, c-format
msgid "The DHCP end range"
msgstr "DHCP 結束範圍"

#: standalone/drakgw:332
#, c-format
msgid "The default lease (in seconds)"
msgstr "預設租約時間 (秒為單位)"

#: standalone/drakgw:333
#, c-format
msgid "The maximum lease (in seconds)"
msgstr "最大租約時間  (秒為單位)"

#: standalone/drakgw:334
#, c-format
msgid "Re-configure interface and DHCP server"
msgstr "重新設定該網路介面與 DHCP 伺服器"

#: standalone/drakgw:341
#, c-format
msgid "The Local Network did not finish with `.0', bailing out."
msgstr "該區域網路並不是以 .0 結尾, 放棄..."

#: standalone/drakgw:351
#, c-format
msgid "Potential LAN address conflict found in current config of %s!\n"
msgstr "潛在的 LAN 位址衝突發現於目前 %s 設定!\n"

#: standalone/drakgw:361
#, c-format
msgid "Configuring..."
msgstr "設定中..."

#: standalone/drakgw:362
#, c-format
msgid "Configuring scripts, installing software, starting servers..."
msgstr "設定 script, 安裝軟體, 啟動相關的 servers 服務"

#: standalone/drakgw:402
#: standalone/drakpxe:231
#: standalone/drakvpn:278
#, c-format
msgid "Problems installing package %s"
msgstr "安裝 %s 套件發生錯誤"

#: standalone/drakgw:598
#, fuzzy, c-format
msgid ""
"Everything has been configured.\n"
"You may now share Internet connection with other computers on your Local Area Network, using automatic network configuration (DHCP) and\n"
" a Transparent Proxy Cache server (SQUID)."
msgstr ""
"每個項目都已經設定好了。\n"
"現在您的系統已經透過 DHCP 動態 IP 分配的方式取得連線 IP, \n"
"並且也已經能夠透過其他電腦的頻寬分享存取 Internet 服務。"

#: standalone/drakhelp:17
#, c-format
msgid ""
" drakhelp 0.1\n"
"Copyright (C) 2003-2004 Mandrakesoft.\n"
"This is free software and may be redistributed under the terms of the GNU GPL.\n"
"\n"
"Usage: \n"
msgstr ""

#: standalone/drakhelp:22
#, c-format
msgid " --help                - display this help     \n"
msgstr ""

#: standalone/drakhelp:23
#, c-format
msgid " --id <id_label>       - load the html help page which refers to id_label\n"
msgstr ""

#: standalone/drakhelp:24
#, c-format
msgid " --doc <link>          - link to another web page ( for WM welcome frontend)\n"
msgstr ""

#: standalone/drakhelp:36
#, fuzzy, c-format
msgid "Mandrakelinux Help Center"
msgstr "Mandrake 控制中心"

#: standalone/drakhelp:36
#, c-format
msgid ""
"%s cannot be displayed \n"
". No Help entry of this type\n"
msgstr ""

#: standalone/drakperm:22
#, c-format
msgid "System settings"
msgstr "系統設定"

#: standalone/drakperm:23
#, fuzzy, c-format
msgid "Custom settings"
msgstr "自訂磁碟分割"

#: standalone/drakperm:24
#, fuzzy, c-format
msgid "Custom & system settings"
msgstr "自訂磁碟分割"

#: standalone/drakperm:44
#, c-format
msgid "Editable"
msgstr "可編輯的"

#: standalone/drakperm:49
#: standalone/drakperm:321
#, c-format
msgid "Path"
msgstr "路徑"

#: standalone/drakperm:49
#: standalone/drakperm:250
#, c-format
msgid "User"
msgstr "使用者"

#: standalone/drakperm:49
#: standalone/drakperm:250
#, c-format
msgid "Group"
msgstr "群組"

#: standalone/drakperm:49
#: standalone/drakperm:333
#, c-format
msgid "Permissions"
msgstr "權限"

#: standalone/drakperm:107
#, fuzzy, c-format
msgid ""
"Here you can see files to use in order to fix permissions, owners, and groups via msec.\n"
"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
"Drakperm 程式能夠讓使用者檢視以及修改重要檔案的權限, 包含擁有者、\n"
"群組等資訊。另外您也可以自行編輯創造更多屬於自訂的規則項目。"

#: standalone/drakperm:110
#, c-format
msgid ""
"The current security level is %s.\n"
"Select permissions to see/edit"
msgstr ""

#: standalone/drakperm:121
#, c-format
msgid "Up"
msgstr "向上"

#: standalone/drakperm:121
#, c-format
msgid "Move selected rule up one level"
msgstr ""

#: standalone/drakperm:122
#, c-format
msgid "Down"
msgstr "向下"

#: standalone/drakperm:122
#, c-format
msgid "Move selected rule down one level"
msgstr ""

#: standalone/drakperm:123
#, fuzzy, c-format
msgid "Add a rule"
msgstr "新增規則"

#: standalone/drakperm:123
#, c-format
msgid "Add a new rule at the end"
msgstr "於結尾新增一項規則"

#: standalone/drakperm:124
#, c-format
msgid "Delete selected rule"
msgstr "刪除所選取的規則"

#. -PO: "Edit" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/drakperm:125
#: standalone/drakups:298
#: standalone/drakups:358
#: standalone/drakups:378
#: standalone/drakvpn:333
#: standalone/drakvpn:694
#: standalone/printerdrake:232
#, c-format
msgid "Edit"
msgstr "編輯"

#: standalone/drakperm:125
#, c-format
msgid "Edit current rule"
msgstr "編輯目前規則"

#: standalone/drakperm:242
#, c-format
msgid "browse"
msgstr "瀏覽"

#: standalone/drakperm:247
#, c-format
msgid "user"
msgstr "擁有者"

#: standalone/drakperm:247
#, c-format
msgid "group"
msgstr "群組"

#: standalone/drakperm:247
#, c-format
msgid "other"
msgstr "其它"

#: standalone/drakperm:252
#, c-format
msgid "Read"
msgstr "已讀"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:255
#, c-format
msgid "Enable \"%s\" to read the file"
msgstr ""

#: standalone/drakperm:259
#, c-format
msgid "Write"
msgstr "寫入"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:262
#, c-format
msgid "Enable \"%s\" to write the file"
msgstr ""

#: standalone/drakperm:266
#, c-format
msgid "Execute"
msgstr "執行"

#. -PO: here %s will be either "user", "group" or "other"
#: standalone/drakperm:269
#, c-format
msgid "Enable \"%s\" to execute the file"
msgstr ""

#: standalone/drakperm:272
#, fuzzy, c-format
msgid "Sticky-bit"
msgstr "Sticky-Bit"

#: standalone/drakperm:272
#, c-format
msgid ""
"Used for directory:\n"
" only owner of directory or file in this directory can delete it"
msgstr ""
"使用於目錄:\n"
" 只有該檔案或目錄的擁有者才可以刪除它"

#: standalone/drakperm:273
#, c-format
msgid "Set-UID"
msgstr "Set-UID"

#: standalone/drakperm:273
#, c-format
msgid "Use owner id for execution"
msgstr "執行時另外具備該擁有者權限"

#: standalone/drakperm:274
#, c-format
msgid "Set-GID"
msgstr "Set-GID"

#: standalone/drakperm:274
#, c-format
msgid "Use group id for execution"
msgstr "執行時另外具備該群組權限"

#: standalone/drakperm:290
#: standalone/drakxtv:89
#, c-format
msgid "User:"
msgstr "使用者："

#: standalone/drakperm:292
#, c-format
msgid "Group:"
msgstr "分類："

#: standalone/drakperm:296
#, c-format
msgid "Current user"
msgstr "目前使用者"

#: standalone/drakperm:297
#, c-format
msgid "When checked, owner and group will not be changed"
msgstr "當選取時, 擁有者與群組將不被更動"

#: standalone/drakperm:307
#, c-format
msgid "Path selection"
msgstr "路徑選擇"

#: standalone/drakperm:327
#, c-format
msgid "Property"
msgstr "特性"

#: standalone/drakpxe:55
#, fuzzy, c-format
msgid "PXE Server Configuration"
msgstr "dhcpd 服務主機設定"

#: standalone/drakpxe:111
#, fuzzy, c-format
msgid "Installation Server Configuration"
msgstr "dhcpd 服務主機設定"

#: standalone/drakpxe:112
#, fuzzy, c-format
msgid ""
"You are about to configure your computer to install a PXE server as a DHCP server\n"
"and a TFTP server to build an installation server.\n"
"With that feature, other computers on your local network will be installable using this computer as source.\n"
"\n"
"Make sure you have configured your Network/Internet access using drakconnect before going any further.\n"
"\n"
"Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN)."
msgstr ""
"目前要進行Internet連線分享的設定, 這個功能能夠\n"
"讓其他區域網路內的電腦透過這台主機的頻寬分享\n"
"連上 Internet。請注意: 您需要另外一張網路卡以便\n"
"於提供區域網路電腦連線存取分享使用。"

#: standalone/drakpxe:143
#, fuzzy, c-format
msgid "Please choose which network interface will be used for the dhcp server."
msgstr "請選擇您要用來連上 Internet 的網路卡"

#: standalone/drakpxe:144
#, fuzzy, c-format
msgid "Interface %s (on network %s)"
msgstr "介面 %s (使用 %s 模組)"

#: standalone/drakpxe:169
#, c-format
msgid ""
"The DHCP server will allow other computer to boot using PXE in the given range of address.\n"
"\n"
"The network address is %s using a netmask of %s.\n"
"\n"
msgstr ""

#: standalone/drakpxe:173
#, c-format
msgid "The DHCP start ip"
msgstr "DHCP 開始 ip"

#: standalone/drakpxe:174
#, fuzzy, c-format
msgid "The DHCP end ip"
msgstr "DHCP 結束範圍"

#: standalone/drakpxe:187
#, c-format
msgid ""
"Please indicate where the installation image will be available.\n"
"\n"
"If you do not have an existing directory, please copy the CD or DVD contents.\n"
"\n"
msgstr ""

#: standalone/drakpxe:192
#, fuzzy, c-format
msgid "Installation image directory"
msgstr "Xpmac (顯示卡驅動程式的安裝)"

#: standalone/drakpxe:196
#, fuzzy, c-format
msgid "No image found"
msgstr "找不到印表機！"

#: standalone/drakpxe:197
#, c-format
msgid "No CD or DVD image found, please copy the installation program and rpm files."
msgstr ""

#: standalone/drakpxe:210
#, c-format
msgid ""
"Please indicate where the auto_install.cfg file is located.\n"
"\n"
"Leave it blank if you do not want to set up automatic installation mode.\n"
"\n"
msgstr ""

#: standalone/drakpxe:215
#, fuzzy, c-format
msgid "Location of auto_install.cfg file"
msgstr "正在製作自動安裝軟片"

#: standalone/drakroam:167
#, c-format
msgid "Status"
msgstr "狀態"

#: standalone/drakroam:174
#, c-format
msgid "Disconnect"
msgstr "斷線"

#: standalone/drakroam:179
#, c-format
msgid "Roaming"
msgstr ""

#: standalone/drakroam:182 standalone/drakroam:256
#, c-format
msgid "Roaming: %s"
msgstr ""

#: standalone/drakroam:189
#, c-format
msgid "Scan interval (sec): "
msgstr ""

#: standalone/drakroam:192
#, c-format
msgid "Set"
msgstr ""

#: standalone/drakroam:197
#, c-format
msgid "Known Networks (Drag up/down or edit)"
msgstr ""

#: standalone/drakroam:205
#, c-format
msgid "Connect"
msgstr "連線"

#: standalone/drakroam:213
#, c-format
msgid "Available Networks"
msgstr ""

#: standalone/drakroam:224
#, c-format
msgid "Rescan"
msgstr "重複掃描"

#: standalone/drakroam:231
#, c-format
msgid "Save and close"
msgstr ""

#: standalone/drakroam:281
#, c-format
msgid "Network: %s"
msgstr ""

#: standalone/drakroam:282
#, c-format
msgid "Mode: %s"
msgstr ""

#: standalone/drakroam:283
#, c-format
msgid "IP: %s"
msgstr ""

#: standalone/drakroam:284
#, c-format
msgid "Encryption: %s"
msgstr ""

#: standalone/drakroam:285
#, c-format
msgid "Gateway: %s"
msgstr ""

#: standalone/drakroam:286
#, c-format
msgid "Signal: %s"
msgstr ""

#: standalone/draksec:49
#, c-format
msgid "ALL"
msgstr ""

#: standalone/draksec:50
#, c-format
msgid "LOCAL"
msgstr ""

#: standalone/draksec:53
#, c-format
msgid "Ignore"
msgstr "忽略"

#. -PO: Do not alter the <span ..> and </span> tags.
#: standalone/draksec:101
#, c-format
msgid ""
"Here, you can setup the security level and administrator of your machine.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Administrator</span>' is the one who will receive security alerts if the\n"
"'<span weight=\"bold\">Security Alerts</span>' option is set. It can be a username or an email.\n"
"\n"
"\n"
"The '<span weight=\"bold\">Security Level</span>' menu allows you to select one of the six preconfigured security levels\n"
"provided with msec. These levels range from '<span weight=\"bold\">poor</span>' security and ease of use, to\n"
"'<span weight=\"bold\">paranoid</span>' config, suitable for very sensitive server applications:\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but very\n"
"easy to use security level. It should only be used for machines not connected to\n"
"any network and that are not accessible to everybody.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Standard</span>: This is the standard security\n"
"recommended for a computer that will be used to connect to the Internet as a\n"
"client.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">High</span>: There are already some\n"
"restrictions, and more automatic checks are run every night.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Higher</span>: The security is now high enough\n"
"to use the system as a server which can accept connections from many clients. If\n"
"your machine is only a client on the Internet, you should choose a lower level.\n"
"\n"
"\n"
"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the previous\n"
"level, but the system is entirely closed and security features are at their\n"
"maximum"
msgstr ""

#: standalone/draksec:154
#: standalone/harddrake2:202
#, c-format
msgid ""
"Description of the fields:\n"
"\n"
msgstr ""
"欄位的描述資訊：\n"
"\n"

#: standalone/draksec:168
#, fuzzy, c-format
msgid "(default value: %s)"
msgstr " (預設：%s)"

#: standalone/draksec:210
#, c-format
msgid "Security Level:"
msgstr "安全等級:"

#: standalone/draksec:217
#, c-format
msgid "Security Administrator:"
msgstr "安全性管理者:"

#: standalone/draksec:219
#, fuzzy, c-format
msgid "Basic options"
msgstr "DrakSec 基本參數選項"

#: standalone/draksec:233
#, c-format
msgid "Network Options"
msgstr "網路選項"

#: standalone/draksec:233
#, c-format
msgid "System Options"
msgstr "系統選項"

#: standalone/draksec:268
#, c-format
msgid "Periodic Checks"
msgstr "週期性檢查"

#: standalone/draksec:298
#, c-format
msgid "Please wait, setting security level..."
msgstr "請稍後, 設定安全等級中..."

#: standalone/draksec:304
#, c-format
msgid "Please wait, setting security options..."
msgstr "請稍後, 設定安全選項..."

#: standalone/draksound:47
#, c-format
msgid "No Sound Card detected!"
msgstr "偵測不到系統有任何音效裝置！"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/draksound:50
#, c-format
msgid ""
"No Sound Card has been detected on your machine. Please verify that a Linux-supported Sound Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"目前您的系統偵測不到任何音效卡裝置, 請確認您的音效卡有安插正確。\n"
"\n"
"\n"
"另外請連上我們的官方網站查看資料庫, 檢視您的音效卡是否已經支援：\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/draksound:57
#, fuzzy, c-format
msgid ""
"\n"
"\n"
"\n"
"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or the sndconfig program.  Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
"\n"
"\n"
"\n"
"請注意, 若是您使用的音效卡是 ISA PnP 類型的話, 您需要使用 sndconfig \n"
"這個程式來設定。請在 console 模式輸入執行 \"sndconfig\" 即可。"

#: standalone/draksplash:21
#, c-format
msgid ""
"package 'ImageMagick' is required to be able to complete configuration.\n"
"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
"系統需要安裝上 ImageMagick 套件才能夠進行設定。\n"
"請點選 \"確定\" 安裝該套件, 或者是點選 \"取消\" 放棄安裝"

#: standalone/draksplash:68
#, c-format
msgid "first step creation"
msgstr "第一部建立"

#: standalone/draksplash:71
#, c-format
msgid "final resolution"
msgstr "     解析度     "

#: standalone/draksplash:72
#, c-format
msgid "choose image file"
msgstr "選擇映像檔案        "

#: standalone/draksplash:73
#, c-format
msgid "Theme name"
msgstr "    佈景名稱   "

#: standalone/draksplash:78
#, c-format
msgid "Browse"
msgstr "瀏覽"

#: standalone/draksplash:93
#: standalone/draksplash:158
#, c-format
msgid "Configure bootsplash picture"
msgstr "無法建立開機載入畫面御覽"

#: standalone/draksplash:96
#, c-format
msgid ""
"x coordinate of text box\n"
"in number of characters"
msgstr "   字元文字方塊的 X 軸坐標                       "

#: standalone/draksplash:97
#, c-format
msgid ""
"y coordinate of text box\n"
"in number of characters"
msgstr ""
"字元文字方塊的 Y 軸坐標\n"
"於數字與字元"

#: standalone/draksplash:98
#, c-format
msgid "text width"
msgstr "文字寬度                                      "

#: standalone/draksplash:99
#, c-format
msgid "text box height"
msgstr "文字方塊高度                                  "

#: standalone/draksplash:100
#, c-format
msgid ""
"the progress bar x coordinate\n"
"of its upper left corner"
msgstr ""
"它的左上角進度棒\n"
"的 x 軸坐標"

#: standalone/draksplash:101
#, c-format
msgid ""
"the progress bar y coordinate\n"
"of its upper left corner"
msgstr "    左上方進度Bar的 y 軸坐標                      "

#: standalone/draksplash:102
#, c-format
msgid "the width of the progress bar"
msgstr "   進度Bar的寬度                                 "

#: standalone/draksplash:103
#, c-format
msgid "the height of the progress bar"
msgstr "   進度Bar的高度                                 "

#: standalone/draksplash:104
#, c-format
msgid "the color of the progress bar"
msgstr "   進度Bar的色彩                                 "

#: standalone/draksplash:119
#, c-format
msgid "Preview"
msgstr "御覽"

#: standalone/draksplash:121
#, c-format
msgid "Save theme"
msgstr "儲存佈景"

#: standalone/draksplash:122
#, c-format
msgid "Choose color"
msgstr "選取色彩"

#: standalone/draksplash:125
#, c-format
msgid "Display logo on Console"
msgstr "在 Console 顯示 logo"

#: standalone/draksplash:126
#, c-format
msgid "Make kernel message quiet by default"
msgstr "設定開機時不顯示核心訊息資訊"

#: standalone/draksplash:161
#: standalone/draksplash:309
#: standalone/draksplash:454
#, c-format
msgid "Notice"
msgstr "注意"

#: standalone/draksplash:161
#: standalone/draksplash:309
#, c-format
msgid "This theme does not yet have a bootsplash in %s!"
msgstr "%s 內尚未有任何開機載入畫面"

#: standalone/draksplash:167
#, fuzzy, c-format
msgid "choose image"
msgstr "選擇映像檔案        "

#: standalone/draksplash:209
#, c-format
msgid "saving Bootsplash theme..."
msgstr "儲存開機載入圖片佈景項目..."

#: standalone/draksplash:435
#, c-format
msgid "ProgressBar color selection"
msgstr "進度巴色彩選擇"

#: standalone/draksplash:454
#, c-format
msgid "You must choose an image file first!"
msgstr "您需要先選擇映像檔案！"

#: standalone/draksplash:459
#, c-format
msgid "Generating preview..."
msgstr "產生御覽圖示中..."

#. -PO:  First %s is theme name, second %s (in parenthesis) is resolution
#: standalone/draksplash:497
#, c-format
msgid "%s BootSplash (%s) preview"
msgstr "%s 開機進度畫面 (%s) 御覽"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/draksplash:503
#, c-format
msgid ""
"The image \"%s\" cannot be load due to the following issue:\n"
"\n"
"<span foreground=\"Red\">%s</span>"
msgstr ""

#: standalone/drakups:74
#, c-format
msgid "Connected through a serial port or an usb cable"
msgstr ""

#: standalone/drakups:80
#, fuzzy, c-format
msgid "Add an UPS device"
msgstr "新增項目"

#: standalone/drakups:83
#, fuzzy, c-format
msgid ""
"Welcome to the UPS configuration utility.\n"
"\n"
"Here, you'll add a new UPS to your system.\n"
msgstr ""
"歡迎來到郵件設定工具。\n"
"\n"
"在這裡, 您能夠設定您的警示通知的方式。\n"

#: standalone/drakups:90
#, c-format
msgid ""
"We're going to add an UPS device.\n"
"\n"
"Do you want to autodetect UPS devices connected to this machine or to manually select them?"
msgstr ""

#: standalone/drakups:93
#, fuzzy, c-format
msgid "Autodetection"
msgstr "自動偵測"

#: standalone/drakups:101
#: standalone/harddrake2:231
#, c-format
msgid "Detection in progress"
msgstr "正在偵測中"

#: standalone/drakups:120
#: standalone/drakups:156
#: standalone/logdrake:449
#: standalone/logdrake:455
#, c-format
msgid "Congratulations"
msgstr "恭喜"

#: standalone/drakups:121
#, c-format
msgid "The wizard successfully added the following UPS devices:"
msgstr ""

#: standalone/drakups:123
#, fuzzy, c-format
msgid "No new UPS devices was found"
msgstr "找不到印表機！"

#: standalone/drakups:128
#: standalone/drakups:140
#, fuzzy, c-format
msgid "UPS driver configuration"
msgstr "OKI Windows 印表機設定"

#: standalone/drakups:128
#, fuzzy, c-format
msgid "Please select your UPS model."
msgstr "請測試滑鼠"

#: standalone/drakups:129
#, fuzzy, c-format
msgid "Manufacturer / Model:"
msgstr "印表機廠商,型號"

#: standalone/drakups:140
#, c-format
msgid ""
"We are configuring the \"%s\" UPS from \"%s\".\n"
"Please fill in its name, its driver and its port."
msgstr ""

#: standalone/drakups:145
#, c-format
msgid "Name:"
msgstr "名稱:"

#: standalone/drakups:145
#, fuzzy, c-format
msgid "The name of your ups"
msgstr "裝置的廠商名稱"

#: standalone/drakups:146
#, c-format
msgid "The driver that manages your ups"
msgstr ""

#: standalone/drakups:147
#, c-format
msgid "Port:"
msgstr "連接埠："

#: standalone/drakups:149
#, fuzzy, c-format
msgid "The port on which is connected your ups"
msgstr "請選取您滑鼠連接的序列埠。"

#: standalone/drakups:156
#, c-format
msgid "The wizard successfully configured the new \"%s\" UPS device."
msgstr ""

#: standalone/drakups:246
#, fuzzy, c-format
msgid "UPS devices"
msgstr "Server 程式"

#: standalone/drakups:247
#: standalone/drakups:266
#: standalone/drakups:282
#: standalone/harddrake2:83
#: standalone/harddrake2:109
#: standalone/harddrake2:116
#, c-format
msgid "Name"
msgstr "名稱"

#: standalone/drakups:265
#, fuzzy, c-format
msgid "UPS users"
msgstr "使用者"

#: standalone/drakups:281
#, fuzzy, c-format
msgid "Access Control Lists"
msgstr "存取網路工具"

#: standalone/drakups:282
#, c-format
msgid "IP mask"
msgstr ""

#: standalone/drakups:294
#, c-format
msgid "Rules"
msgstr "規則"

#: standalone/drakups:295
#, c-format
msgid "Action"
msgstr "行動"

#: standalone/drakups:295
#: standalone/drakvpn:1146
#: standalone/harddrake2:80
#, c-format
msgid "Level"
msgstr "難度"

#: standalone/drakups:295
#, fuzzy, c-format
msgid "ACL name"
msgstr "LVM 名稱？"

#: standalone/drakups:325
#: standalone/drakups:329
#: standalone/drakups:338
#, c-format
msgid "DrakUPS"
msgstr "DrakUPS"

#: standalone/drakups:335
#, c-format
msgid "Welcome to the UPS configuration tools"
msgstr "歡迎使用 UPS 設定工具"

#: standalone/drakvpn:73
#, c-format
msgid "DrakVPN"
msgstr "DrakVPN"

#: standalone/drakvpn:95
#, c-format
msgid "The VPN connection is enabled."
msgstr "VPN 連線已經啟用。"

#: standalone/drakvpn:96
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently enabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"VPN 連線已經設定完成。\n"
"\n"
"目前是啟用的狀態。\n"
"\n"
"您打算要做什麼呢？"

#: standalone/drakvpn:105
#, c-format
msgid "Disabling VPN..."
msgstr "正在關閉 VPN..."

#: standalone/drakvpn:114
#, c-format
msgid "The VPN connection is now disabled."
msgstr "VPN 連線現在關閉了。"

#: standalone/drakvpn:121
#, c-format
msgid "VPN connection currently disabled"
msgstr "VPN 連線目前是關閉的狀態"

#: standalone/drakvpn:122
#, c-format
msgid ""
"The setup of a VPN connection has already been done.\n"
"\n"
"It's currently disabled.\n"
"\n"
"What would you like to do?"
msgstr ""
"VPN 連線已經設定完成。\n"
"\n"
"目前是關閉的狀態。\n"
"\n"
"您打算要做什麼呢？"

#: standalone/drakvpn:135
#, c-format
msgid "Enabling VPN..."
msgstr "正在啟用 VPN..."

#: standalone/drakvpn:141
#, c-format
msgid "The VPN connection is now enabled."
msgstr "VPN 連線現在啟用了。"

#: standalone/drakvpn:155
#: standalone/drakvpn:183
#, c-format
msgid "Simple VPN setup."
msgstr "簡單的 VPN 設定。"

#: standalone/drakvpn:156
#, c-format
msgid ""
"You are about to configure your computer to use a VPN connection.\n"
"\n"
"With this feature, computers on your local private network and computers\n"
"on some other remote private networks, can share resources, through\n"
"their respective firewalls, over the Internet, in a secure manner. \n"
"\n"
"The communication over the Internet is encrypted. The local and remote\n"
"computers look as if they were on the same network.\n"
"\n"
"Make sure you have configured your Network/Internet access using\n"
"drakconnect before going any further."
msgstr ""

#: standalone/drakvpn:184
#, c-format
msgid ""
"VPN connection.\n"
"\n"
"This program is based on the following projects:\n"
" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
" - the docs and man pages coming with the %s package\n"
"\n"
"Please read AT LEAST the ipsec-howto docs\n"
"before going any further."
msgstr ""

#: standalone/drakvpn:196
#, c-format
msgid "Kernel module."
msgstr "核心模組。"

#: standalone/drakvpn:197
#, c-format
msgid ""
"The kernel needs to have ipsec support.\n"
"\n"
"You're running a %s kernel version.\n"
"\n"
"This kernel has '%s' support."
msgstr ""

#: standalone/drakvpn:292
#, c-format
msgid "Security Policies"
msgstr "安全性政策："

#: standalone/drakvpn:292
#, c-format
msgid "IKE daemon racoon"
msgstr ""

#: standalone/drakvpn:295
#: standalone/drakvpn:306
#, c-format
msgid "Configuration file"
msgstr "組態設定檔"

#: standalone/drakvpn:296
#, c-format
msgid ""
"Configuration step!\n"
"\n"
"You need to define the Security Policies and then to \n"
"configure the automatic key exchange (IKE) daemon. \n"
"The KAME IKE daemon we're using is called 'racoon'.\n"
"\n"
"What would you like to configure?\n"
msgstr ""

#: standalone/drakvpn:307
#, c-format
msgid ""
"Next, we will configure the %s file.\n"
"\n"
"\n"
"Simply click on Next.\n"
msgstr ""

#: standalone/drakvpn:325
#: standalone/drakvpn:685
#, fuzzy, c-format
msgid "%s entries"
msgstr ", 第 %s 磁區"

#: standalone/drakvpn:326
#, c-format
msgid ""
"The %s file contents\n"
"is divided into sections.\n"
"\n"
"You can now:\n"
"\n"
"  - display, add, edit, or remove sections, then\n"
"  - commit the changes\n"
"\n"
"What would you like to do?\n"
msgstr ""

#: standalone/drakvpn:333
#: standalone/drakvpn:694
#, c-format
msgid ""
"_:display here is a verb\n"
"Display"
msgstr "顯示"

#: standalone/drakvpn:333
#: standalone/drakvpn:694
#, fuzzy, c-format
msgid "Commit"
msgstr "緊密模式"

#: standalone/drakvpn:347
#: standalone/drakvpn:351
#: standalone/drakvpn:709
#: standalone/drakvpn:713
#, c-format
msgid ""
"_:display here is a verb\n"
"Display configuration"
msgstr "顯示設定組態"

#: standalone/drakvpn:352
#, c-format
msgid ""
"The %s file does not exist.\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose 'add'.\n"
msgstr ""

#: standalone/drakvpn:368
#, c-format
msgid "ipsec.conf entries"
msgstr ""

#: standalone/drakvpn:369
#, c-format
msgid ""
"The %s file contains different sections.\n"
"\n"
"Here is its skeleton:\t'config setup' \n"
"\t\t\t\t\t'conn default' \n"
"\t\t\t\t\t'normal1'\n"
"\t\t\t\t\t'normal2' \n"
"\n"
"You can now add one of these sections.\n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "config setup"
msgstr "重新設定"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "conn %default"
msgstr "預設"

#: standalone/drakvpn:376
#, fuzzy, c-format
msgid "normal conn"
msgstr "一般模式"

#: standalone/drakvpn:382
#: standalone/drakvpn:423
#: standalone/drakvpn:510
#, fuzzy, c-format
msgid "Exists!"
msgstr "離開"

#: standalone/drakvpn:383
#: standalone/drakvpn:424
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change its name.\n"
msgstr ""

#: standalone/drakvpn:400
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow this config\n"
"setup section.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:405
#, fuzzy, c-format
msgid "interfaces"
msgstr "介面"

#: standalone/drakvpn:406
#, c-format
msgid "klipsdebug"
msgstr ""

#: standalone/drakvpn:407
#, c-format
msgid "plutodebug"
msgstr ""

#: standalone/drakvpn:408
#, c-format
msgid "plutoload"
msgstr ""

#: standalone/drakvpn:409
#, c-format
msgid "plutostart"
msgstr ""

#: standalone/drakvpn:410
#, c-format
msgid "uniqueids"
msgstr ""

#: standalone/drakvpn:444
#, c-format
msgid ""
"This is the first section after the config\n"
"setup one.\n"
"\n"
"Here you define the default settings. \n"
"All the other sections will follow this one.\n"
"The left settings are optional. If do not define\n"
"them here, globally, you can define them in each\n"
"section.\n"
msgstr ""

#: standalone/drakvpn:451
#, fuzzy, c-format
msgid "PFS"
msgstr "HFS"

#: standalone/drakvpn:452
#, c-format
msgid "keyingtries"
msgstr ""

#: standalone/drakvpn:453
#, c-format
msgid "compress"
msgstr ""

#: standalone/drakvpn:454
#, c-format
msgid "disablearrivalcheck"
msgstr ""

#: standalone/drakvpn:455
#: standalone/drakvpn:494
#, c-format
msgid "left"
msgstr "[左]"

#: standalone/drakvpn:456
#: standalone/drakvpn:495
#, c-format
msgid "leftcert"
msgstr ""

#: standalone/drakvpn:457
#: standalone/drakvpn:496
#, c-format
msgid "leftrsasigkey"
msgstr ""

#: standalone/drakvpn:458
#: standalone/drakvpn:497
#, c-format
msgid "leftsubnet"
msgstr ""

#: standalone/drakvpn:459
#: standalone/drakvpn:498
#, c-format
msgid "leftnexthop"
msgstr ""

#: standalone/drakvpn:488
#, c-format
msgid ""
"Your %s file has several sections, or connections.\n"
"\n"
"You can now add a new section.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:491
#, fuzzy, c-format
msgid "section name"
msgstr "連線名稱"

#: standalone/drakvpn:492
#, fuzzy, c-format
msgid "authby"
msgstr "路徑"

#: standalone/drakvpn:493
#, c-format
msgid "auto"
msgstr "自動"

#: standalone/drakvpn:499
#, c-format
msgid "right"
msgstr "[右]"

#: standalone/drakvpn:500
#, fuzzy, c-format
msgid "rightcert"
msgstr "較高"

#: standalone/drakvpn:501
#, c-format
msgid "rightrsasigkey"
msgstr ""

#: standalone/drakvpn:502
#, c-format
msgid "rightsubnet"
msgstr ""

#: standalone/drakvpn:503
#, c-format
msgid "rightnexthop"
msgstr ""

#: standalone/drakvpn:511
#, c-format
msgid ""
"A section with this name already exists.\n"
"The section names have to be unique.\n"
"\n"
"You'll have to go back and add another section\n"
"or change the name of the section.\n"
msgstr ""

#: standalone/drakvpn:543
#, c-format
msgid ""
"Add a Security Policy.\n"
"\n"
"You can now add a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:576
#: standalone/drakvpn:826
#, fuzzy, c-format
msgid "Edit section"
msgstr "路徑選擇"

#: standalone/drakvpn:577
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to edit \n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:580
#: standalone/drakvpn:660
#: standalone/drakvpn:831
#: standalone/drakvpn:877
#, fuzzy, c-format
msgid "Section names"
msgstr "連線名稱"

#: standalone/drakvpn:590
#, fuzzy, c-format
msgid "Can not edit!"
msgstr "無法找到 %s (位於 %s)"

#: standalone/drakvpn:591
#, c-format
msgid ""
"You cannot edit this section.\n"
"\n"
"This section is mandatory for Freeswan 2.X.\n"
"One has to specify version 2.0 on the top\n"
"of the %s file, and eventually, disable or\n"
"enable the opportunistic encryption.\n"
msgstr ""

#: standalone/drakvpn:600
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the config setup section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:611
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the default section entries.\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:624
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can now edit the normal section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:645
#, c-format
msgid ""
"Edit a Security Policy.\n"
"\n"
"You can now edit a Security Policy.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:656
#: standalone/drakvpn:873
#, fuzzy, c-format
msgid "Remove section"
msgstr "移除清單"

#: standalone/drakvpn:657
#: standalone/drakvpn:874
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here below the one you want to remove\n"
"and then click on next.\n"
msgstr ""

#: standalone/drakvpn:686
#, c-format
msgid ""
"The racoon.conf file configuration.\n"
"\n"
"The contents of this file is divided into sections.\n"
"You can now:\n"
"  - display \t\t (display the file contents)\n"
"  - add\t\t\t (add one section)\n"
"  - edit \t\t\t (modify parameters of an existing section)\n"
"  - remove \t\t (remove an existing section)\n"
"  - commit \t\t (writes the changes to the real file)"
msgstr ""

#: standalone/drakvpn:714
#, c-format
msgid ""
"The %s file does not exist\n"
"\n"
"This must be a new configuration.\n"
"\n"
"You'll have to go back and choose configure.\n"
msgstr ""

#: standalone/drakvpn:728
#, c-format
msgid "racoonf.conf entries"
msgstr ""

#: standalone/drakvpn:729
#, c-format
msgid ""
"The 'add' sections step.\n"
"\n"
"Here below is the racoon.conf file skeleton:\n"
"\t'path'\n"
"\t'remote'\n"
"\t'sainfo' \n"
"\n"
"Choose the section you would like to add.\n"
msgstr ""

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "path"
msgstr "路徑"

#: standalone/drakvpn:735
#, c-format
msgid "remote"
msgstr "遠端"

#: standalone/drakvpn:735
#, fuzzy, c-format
msgid "sainfo"
msgstr "資訊"

#: standalone/drakvpn:743
#, c-format
msgid ""
"The 'add path' section step.\n"
"\n"
"The path sections have to be on top of your racoon.conf file.\n"
"\n"
"Put your mouse over the certificate entry to obtain online help."
msgstr ""

#: standalone/drakvpn:746
#, fuzzy, c-format
msgid "path type"
msgstr "改變分割區格式"

#: standalone/drakvpn:750
#, c-format
msgid ""
"path include path: specifies a path to include\n"
"a file. See File Inclusion.\n"
"\tExample: path include '/etc/racoon'\n"
"\n"
"path pre_shared_key file: specifies a file containing\n"
"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
"\n"
"path certificate path: racoon(8) will search this directory\n"
"if a certificate or certificate request is received.\n"
"\tExample: path certificate '/etc/cert' ;\n"
"\n"
"File Inclusion: include file \n"
"other configuration files can be included.\n"
"\tExample: include \"remote.conf\" ;\n"
"\n"
"Pre-shared key File: Pre-shared key file defines a pair\n"
"of the identifier and the shared secret key which are used at\n"
"Pre-shared key authentication method in phase 1."
msgstr ""

#: standalone/drakvpn:770
#: standalone/drakvpn:863
#, fuzzy, c-format
msgid "real file"
msgstr "選擇檔案"

#: standalone/drakvpn:793
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your racoon.conf file.\n"
"\n"
"You can now choose the remote settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:810
#, c-format
msgid ""
"Make sure you already have the path sections\n"
"on the top of your %s file.\n"
"\n"
"You can now choose the sainfo settings.\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:827
#, c-format
msgid ""
"Your %s file has several sections or connections.\n"
"\n"
"You can choose here in the list below the one you want\n"
"to edit and then click on next.\n"
msgstr ""

#: standalone/drakvpn:838
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"\n"
"You can now edit the remote section entries.\n"
"\n"
"Choose continue when you are done to write the data.\n"
msgstr ""

#: standalone/drakvpn:847
#, c-format
msgid ""
"Your %s file has several sections.\n"
"\n"
"You can now edit the sainfo section entries.\n"
"\n"
"Choose continue when you are done to write the data."
msgstr ""

#: standalone/drakvpn:855
#, c-format
msgid ""
"This section has to be on top of your\n"
"%s file.\n"
"\n"
"Make sure all other sections follow these path\n"
"sections.\n"
"\n"
"You can now edit the path entries.\n"
"\n"
"Choose continue or previous when you are done.\n"
msgstr ""

#: standalone/drakvpn:862
#, c-format
msgid "path_type"
msgstr ""

#: standalone/drakvpn:903
#, c-format
msgid ""
"Everything has been configured.\n"
"\n"
"You may now share resources through the Internet,\n"
"in a secure way, using a VPN connection.\n"
"\n"
"You should make sure that that the tunnels shorewall\n"
"section is configured."
msgstr ""

#: standalone/drakvpn:923
#, c-format
msgid "Sainfo source address"
msgstr ""

#: standalone/drakvpn:924
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.209 is the source address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.1.0/24 is the source address"
msgstr ""

#: standalone/drakvpn:941
#, fuzzy, c-format
msgid "Sainfo source protocol"
msgstr "Europe 通訊協定"

#: standalone/drakvpn:942
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe first 'any' allows any protocol for the source"
msgstr ""

#: standalone/drakvpn:956
#, c-format
msgid "Sainfo destination address"
msgstr ""

#: standalone/drakvpn:957
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\t203.178.141.218 is the destination address\n"
"\n"
"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
"\t172.16.2.0/24 is the destination address"
msgstr ""

#: standalone/drakvpn:974
#, fuzzy, c-format
msgid "Sainfo destination protocol"
msgstr "Windows 整合工具"

#: standalone/drakvpn:975
#, c-format
msgid ""
"sainfo (source_id destination_id | anonymous) { statements }\n"
"defines the parameters of the IKE phase 2\n"
"(IPsec-SA establishment).\n"
"\n"
"source_id and destination_id are constructed like:\n"
"\n"
"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
"Examples: \n"
"\n"
"sainfo anonymous (accepts connections from anywhere)\n"
"\tleave blank this entry if you want anonymous\n"
"\n"
"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
"\tthe last 'any' allows any protocol for the destination"
msgstr ""

#: standalone/drakvpn:989
#, c-format
msgid "PFS group"
msgstr ""

#: standalone/drakvpn:991
#, c-format
msgid ""
"define the group of Diffie-Hellman exponentiations.\n"
"If you do not require PFS then you can omit this directive.\n"
"Any proposal will be accepted if you do not specify one.\n"
"group is one of the following: modp768, modp1024, modp1536.\n"
"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""

#: standalone/drakvpn:996
#, fuzzy, c-format
msgid "Lifetime number"
msgstr "一個數字"

#: standalone/drakvpn:997
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""

#: standalone/drakvpn:1013
#, c-format
msgid "Lifetime unit"
msgstr ""

#: standalone/drakvpn:1015
#, c-format
msgid ""
"define a lifetime of a certain time which will be pro-\n"
"posed in the phase 1 negotiations.  Any proposal will be\n"
"accepted, and the attribute(s) will not be proposed to\n"
"the peer if you do not specify it(them).  They can be\n"
"individually specified in each proposal.\n"
"\n"
"Examples: \n"
"\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 1 min;    # sec,min,hour\n"
"        lifetime time 30 sec;\n"
"        lifetime time 30 sec;\n"
"        lifetime time 60 sec;\n"
"\tlifetime time 12 hour;\n"
"\n"
"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and 'hour'.\n"
msgstr ""

#: standalone/drakvpn:1031
#: standalone/drakvpn:1116
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "認證方式"

#: standalone/drakvpn:1033
#, fuzzy, c-format
msgid "Authentication algorithm"
msgstr "認證方式"

#: standalone/drakvpn:1035
#, c-format
msgid "Compression algorithm"
msgstr ""

#: standalone/drakvpn:1036
#, fuzzy, c-format
msgid "deflate"
msgstr "預設"

#: standalone/drakvpn:1043
#, c-format
msgid "Remote"
msgstr "遠端"

#: standalone/drakvpn:1044
#, c-format
msgid ""
"remote (address | anonymous) [[port]] { statements }\n"
"specifies the parameters for IKE phase 1 for each remote node.\n"
"The default port is 500.  If anonymous is specified, the state-\n"
"ments apply to all peers which do not match any other remote\n"
"directive.\n"
"\n"
"Examples: \n"
"\n"
"remote anonymous\n"
"remote ::1 [8000]"
msgstr ""

#: standalone/drakvpn:1052
#, fuzzy, c-format
msgid "Exchange mode"
msgstr "撥接的模式"

#: standalone/drakvpn:1054
#, c-format
msgid ""
"defines the exchange mode for phase 1 when racoon is the\n"
"initiator. Also it means the acceptable exchange mode\n"
"when racoon is responder. More than one mode can be\n"
"specified by separating them with a comma. All of the\n"
"modes are acceptable. The first exchange mode is what\n"
"racoon uses when it is the initiator.\n"
msgstr ""

#: standalone/drakvpn:1060
#, fuzzy, c-format
msgid "Generate policy"
msgstr "安全性"

#: standalone/drakvpn:1061
#: standalone/drakvpn:1077
#: standalone/drakvpn:1090
#, c-format
msgid "off"
msgstr "關"

#: standalone/drakvpn:1061
#: standalone/drakvpn:1077
#: standalone/drakvpn:1090
#, c-format
msgid "on"
msgstr "於"

#: standalone/drakvpn:1062
#, c-format
msgid ""
"This directive is for the responder.  Therefore you\n"
"should set passive on in order that racoon(8) only\n"
"becomes a responder.  If the responder does not have any\n"
"policy in SPD during phase 2 negotiation, and the direc-\n"
"tive is set on, then racoon(8) will choice the first pro-\n"
"posal in the SA payload from the initiator, and generate\n"
"policy entries from the proposal.  It is useful to nego-\n"
"tiate with the client which is allocated IP address\n"
"dynamically.  Note that inappropriate policy might be\n"
"installed into the responder's SPD by the initiator.  So\n"
"that other communication might fail if such policies\n"
"installed due to some policy mismatches between the ini-\n"
"tiator and the responder.  This directive is ignored in\n"
"the initiator case.  The default value is off."
msgstr ""

#: standalone/drakvpn:1076
#, fuzzy, c-format
msgid "Passive"
msgstr "路徑選擇"

#: standalone/drakvpn:1078
#, c-format
msgid ""
"If you do not want to initiate the negotiation, set this\n"
"to on.  The default value is off.  It is useful for a\n"
"server."
msgstr ""

#: standalone/drakvpn:1081
#, c-format
msgid "Certificate type"
msgstr ""

#: standalone/drakvpn:1083
#, fuzzy, c-format
msgid "My certfile"
msgstr "選擇檔案"

#: standalone/drakvpn:1084
#, fuzzy, c-format
msgid "Name of the certificate"
msgstr "印表機名稱"

#: standalone/drakvpn:1085
#, c-format
msgid "My private key"
msgstr "我的私鑰"

#: standalone/drakvpn:1086
#, c-format
msgid "Name of the private key"
msgstr "私鑰名稱"

#: standalone/drakvpn:1087
#, fuzzy, c-format
msgid "Peers certfile"
msgstr "選擇檔案"

#: standalone/drakvpn:1088
#, c-format
msgid "Name of the peers certificate"
msgstr ""

#: standalone/drakvpn:1089
#, fuzzy, c-format
msgid "Verify cert"
msgstr "極好的"

#: standalone/drakvpn:1091
#, c-format
msgid ""
"If you do not want to verify the peer's certificate for\n"
"some reason, set this to off.  The default is on."
msgstr ""

#: standalone/drakvpn:1093
#, c-format
msgid "My identifier"
msgstr ""

#: standalone/drakvpn:1094
#, c-format
msgid ""
"specifies the identifier sent to the remote host and the\n"
"type to use in the phase 1 negotiation.  address, FQDN,\n"
"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
"they are used like:\n"
"\tmy_identifier address [address];\n"
"\t\tthe type is the IP address.  This is the default\n"
"\t\ttype if you do not specify an identifier to use.\n"
"\tmy_identifier user_fqdn string;\n"
"\t\tthe type is a USER_FQDN (user fully-qualified\n"
"\t\tdomain name).\n"
"\tmy_identifier FQDN string;\n"
"\t\tthe type is a FQDN (fully-qualified domain name).\n"
"\tmy_identifier keyid file;\n"
"\t\tthe type is a KEY_ID.\n"
"\tmy_identifier asn1dn [string];\n"
"\t\tthe type is an ASN.1 distinguished name.  If\n"
"\t\tstring is omitted, racoon(8) will get DN from\n"
"\t\tSubject field in the certificate.\n"
"\n"
"Examples: \n"
"\n"
"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""

#: standalone/drakvpn:1114
#, fuzzy, c-format
msgid "Peers identifier"
msgstr "印表機"

#: standalone/drakvpn:1115
#, fuzzy, c-format
msgid "Proposal"
msgstr "通訊協定"

#: standalone/drakvpn:1117
#, c-format
msgid ""
"specify the encryption algorithm used for the\n"
"phase 1 negotiation. This directive must be defined. \n"
"algorithm is one of the following: \n"
"\n"
"DES, 3DES, blowfish, cast128 for oakley.\n"
"\n"
"For other transforms, this statement should not be used."
msgstr ""

#: standalone/drakvpn:1124
#, c-format
msgid "Hash algorithm"
msgstr ""

#: standalone/drakvpn:1126
#, fuzzy, c-format
msgid "DH group"
msgstr "群組"

#: standalone/drakvpn:1133
#, c-format
msgid "Command"
msgstr "指令"

#: standalone/drakvpn:1134
#, c-format
msgid "Source IP range"
msgstr ""

#: standalone/drakvpn:1135
#, c-format
msgid "Destination IP range"
msgstr ""

#: standalone/drakvpn:1136
#, fuzzy, c-format
msgid "Upper-layer protocol"
msgstr "Europe 通訊協定"

#: standalone/drakvpn:1136
#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "any"
msgstr "天"

#: standalone/drakvpn:1138
#, c-format
msgid "Flag"
msgstr "旗幟"

#: standalone/drakvpn:1139
#, c-format
msgid "Direction"
msgstr "方向"

#: standalone/drakvpn:1140
#, c-format
msgid "IPsec policy"
msgstr ""

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "ipsec"
msgstr "Msec 安全設定偵測"

#: standalone/drakvpn:1140
#, fuzzy, c-format
msgid "discard"
msgstr "關閉"

#: standalone/drakvpn:1143
#, c-format
msgid "Mode"
msgstr "模式"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "tunnel"
msgstr "取消"

#: standalone/drakvpn:1143
#, fuzzy, c-format
msgid "transport"
msgstr "測試連接埠"

#: standalone/drakvpn:1145
#, fuzzy, c-format
msgid "Source/destination"
msgstr "工作站平台"

#: standalone/drakvpn:1146
#, c-format
msgid "require"
msgstr ""

#: standalone/drakvpn:1146
#, c-format
msgid "default"
msgstr "預設"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "use"
msgstr "滑鼠"

#: standalone/drakvpn:1146
#, fuzzy, c-format
msgid "unique"
msgstr "Martinique"

#: standalone/drakxtv:45
#, c-format
msgid "USA (broadcast)"
msgstr "美國 (boradcast)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable)"
msgstr "美國 (cable)"

#: standalone/drakxtv:45
#, c-format
msgid "USA (cable-hrc)"
msgstr "美國 (cable-hrc)"

#: standalone/drakxtv:45
#, c-format
msgid "Canada (cable)"
msgstr "加拿大 (cable)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (broadcast)"
msgstr "日本  (broascast)"

#: standalone/drakxtv:46
#, c-format
msgid "Japan (cable)"
msgstr "日本 (cable)"

#: standalone/drakxtv:46
#, c-format
msgid "China (broadcast)"
msgstr "中國 (broadcast)"

#: standalone/drakxtv:47
#, c-format
msgid "West Europe"
msgstr "西歐"

#: standalone/drakxtv:47
#, c-format
msgid "East Europe"
msgstr "東歐"

#: standalone/drakxtv:47
#, c-format
msgid "France [SECAM]"
msgstr "法國 [SECAM]"

#: standalone/drakxtv:48
#, c-format
msgid "Newzealand"
msgstr "丹麥"

#: standalone/drakxtv:51
#, c-format
msgid "Australian Optus cable TV"
msgstr "阿根廷 Optus cable TV"

#: standalone/drakxtv:85
#, c-format
msgid ""
"Please,\n"
"type in your tv norm and country"
msgstr ""

#: standalone/drakxtv:87
#, c-format
msgid "TV norm:"
msgstr "TV norm:"

#: standalone/drakxtv:88
#, c-format
msgid "Area:"
msgstr "區域："

#: standalone/drakxtv:93
#, c-format
msgid "Scanning for TV channels in progress..."
msgstr "準備開始掃描電視頻道"

#: standalone/drakxtv:103
#, c-format
msgid "Scanning for TV channels"
msgstr "正在掃描電視頻道"

#: standalone/drakxtv:107
#, c-format
msgid "There was an error while scanning for TV channels"
msgstr "掃描電視時頻道發生錯誤"

#: standalone/drakxtv:110
#, c-format
msgid "Have a nice day!"
msgstr "祝您有個美好的一天！"

#: standalone/drakxtv:111
#, c-format
msgid "Now, you can run xawtv (under X Window!) !\n"
msgstr "現在，您可以在 X 環境下執行 xawtv 程式了！\n"

#: standalone/drakxtv:149
#, c-format
msgid "No TV Card detected!"
msgstr "系統偵測不到任何電視卡！"

#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: standalone/drakxtv:151
#, c-format
msgid ""
"No TV Card has been detected on your machine. Please verify that a Linux-supported Video/TV Card is correctly plugged in.\n"
"\n"
"\n"
"You can visit our hardware database at:\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
"目前您的系統偵測不到任何電視卡, 請確認您的電視卡有安插正確。\n"
"\n"
"\n"
"另外請連上我們的官方網站查看資料庫, 檢視您的電視卡是否已經支援：\n"
"\n"
"\n"
"http://www.linux-mandrake.com/en/hardware.php3"

#: standalone/harddrake2:23
#, c-format
msgid "Alternative drivers"
msgstr "另外可供選擇的驅動程式"

#: standalone/harddrake2:24
#, c-format
msgid "the list of alternative drivers for this sound card"
msgstr "可供您的音效卡額外可選擇的驅動程式清單"

#: standalone/harddrake2:27
#, c-format
msgid "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr "該裝置目前安插上了多少個實體 bug 裝置 (比方：PCI、USB 等等...)"

#: standalone/harddrake2:29
#: standalone/harddrake2:144
#, c-format
msgid "Bus identification"
msgstr "匯流排描述"

#: standalone/harddrake2:30
#, fuzzy, c-format
msgid "- PCI and USB devices: this lists the vendor, device, subvendor and subdevice PCI/USB ids"
msgstr "- PCI 與 USB 裝置：這列出了廠商名稱, 裝置名稱與附屬廠商等 PCI/USB IDS 資訊"

#: standalone/harddrake2:33
#, c-format
msgid ""
"- pci devices: this gives the PCI slot, device and function of this card\n"
"- eide devices: the device is either a slave or a master device\n"
"- scsi devices: the scsi bus and the scsi device ids"
msgstr ""
"- PCI 裝置 ：包含 PCI 插曹, 介面卡裝置的功能\n"
"- EIDE 裝置：包含 Master 或者是 Slave 裝置項目\n"
"- SCSI 裝置：包含 SCSI 匯流排裝置與 SCSI 裝置的 IDS"

#: standalone/harddrake2:36
#, c-format
msgid "Drive capacity"
msgstr ""

#: standalone/harddrake2:36
#, c-format
msgid "special capacities of the driver (burning ability and or DVD support)"
msgstr ""

#: standalone/harddrake2:37
#, fuzzy, c-format
msgid "this field describes the device"
msgstr "該裝置的欄位描述"

#: standalone/harddrake2:38
#, c-format
msgid "Old device file"
msgstr "舊的裝置檔案"

#: standalone/harddrake2:39
#, c-format
msgid "old static device name used in dev package"
msgstr "dev 套件內所使用的舊有裝置名稱"

#: standalone/harddrake2:40
#, c-format
msgid "New devfs device"
msgstr "新的 devfs 裝置"

#: standalone/harddrake2:41
#, fuzzy, c-format
msgid "new dynamic device name generated by core kernel devfs"
msgstr "由何新的 devfs 提供產生的動態新裝置名稱"

#. -PO: here "module" is the "jargon term" for a kernel driver
#: standalone/harddrake2:44
#, c-format
msgid "Module"
msgstr "型號"

#: standalone/harddrake2:44
#, c-format
msgid "the module of the GNU/Linux kernel that handles the device"
msgstr "負責處理此裝置的 GNU/Linux 核心模組"

#: standalone/harddrake2:45
#, c-format
msgid "Extended partitions"
msgstr "延伸分割區"

#: standalone/harddrake2:45
#, c-format
msgid "the number of extended partitions"
msgstr "延伸分割區的數目"

#: standalone/harddrake2:46
#, c-format
msgid "Geometry"
msgstr "幾何"

#: standalone/harddrake2:46
#, c-format
msgid "Cylinder/head/sectors geometry of the disk"
msgstr ""

#: standalone/harddrake2:47
#, c-format
msgid "Disk controller"
msgstr ""

#: standalone/harddrake2:47
#, c-format
msgid "the disk controller on the host side"
msgstr ""

#: standalone/harddrake2:48
#, c-format
msgid "class of hardware device"
msgstr "硬體裝置類別"

#: standalone/harddrake2:49
#: standalone/harddrake2:81
#: standalone/printerdrake:211
#, c-format
msgid "Model"
msgstr "型號"

#: standalone/harddrake2:49
#, c-format
msgid "hard disk model"
msgstr "硬碟型號"

#: standalone/harddrake2:50
#, c-format
msgid "network printer port"
msgstr "網路印表機連接埠"

#: standalone/harddrake2:51
#, c-format
msgid "Primary partitions"
msgstr "主分割區"

#: standalone/harddrake2:51
#, c-format
msgid "the number of the primary partitions"
msgstr "主分割區的數目"

#: standalone/harddrake2:52
#, c-format
msgid "the vendor name of the device"
msgstr "裝置的廠商名稱"

#: standalone/harddrake2:53
#, c-format
msgid "Bus PCI #"
msgstr ""

#: standalone/harddrake2:53
#, c-format
msgid "the PCI bus on which the device is plugged"
msgstr "安裝該裝置的 PCI 匯流排"

#: standalone/harddrake2:54
#, c-format
msgid "PCI device #"
msgstr "PCI 裝置編號"

#: standalone/harddrake2:54
#, c-format
msgid "PCI device number"
msgstr "PCI 裝置的編號"

#: standalone/harddrake2:55
#, c-format
msgid "PCI function #"
msgstr ""

#: standalone/harddrake2:55
#, fuzzy, c-format
msgid "PCI function number"
msgstr "連線名稱"

#: standalone/harddrake2:56
#, fuzzy, c-format
msgid "Vendor ID"
msgstr "廠商"

#: standalone/harddrake2:56
#, c-format
msgid "this is the standard numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "Device ID"
msgstr "裝置： "

#: standalone/harddrake2:57
#, fuzzy, c-format
msgid "this is the numerical identifier of the device"
msgstr "裝置的廠商名稱"

#: standalone/harddrake2:58
#, c-format
msgid "Sub vendor ID"
msgstr ""

#: standalone/harddrake2:58
#, c-format
msgid "this is the minor numerical identifier of the vendor"
msgstr ""

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "Sub device ID"
msgstr "Server 程式"

#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "this is the minor numerical identifier of the device"
msgstr "裝置的廠商名稱"

#: standalone/harddrake2:60
#, fuzzy, c-format
msgid "Device USB ID"
msgstr "裝置： "

#: standalone/harddrake2:60
#, c-format
msgid ".."
msgstr ".."

#: standalone/harddrake2:64
#, c-format
msgid "Bogomips"
msgstr ""

#: standalone/harddrake2:64
#, c-format
msgid "the GNU/Linux kernel needs to run a calculation loop at boot time to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu."
msgstr ""

#: standalone/harddrake2:65
#, c-format
msgid "Cache size"
msgstr "快取大小"

#: standalone/harddrake2:65
#, c-format
msgid "size of the (second level) cpu cache"
msgstr "CPU 的第二層快取記憶體大小"

#. -PO: here "comas" is the medical coma, not the lexical coma!!
#: standalone/harddrake2:68
#, c-format
msgid "Coma bug"
msgstr ""

#: standalone/harddrake2:68
#, c-format
msgid "whether this cpu has the Cyrix 6x86 Coma bug"
msgstr ""

#: standalone/harddrake2:69
#, c-format
msgid "Cpuid family"
msgstr "CPU 家族"

#: standalone/harddrake2:69
#, c-format
msgid "family of the cpu (eg: 6 for i686 class)"
msgstr "CPU 的家族 (例如：6 表示 i686 等級)"

#: standalone/harddrake2:70
#, fuzzy, c-format
msgid "Cpuid level"
msgstr "安全等級"

#: standalone/harddrake2:70
#, c-format
msgid "information level that can be obtained through the cpuid instruction"
msgstr ""

#: standalone/harddrake2:71
#, c-format
msgid "Frequency (MHz)"
msgstr "頻率 (MHz)"

#: standalone/harddrake2:71
#, c-format
msgid "the CPU frequency in MHz (Megahertz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)"
msgstr "CPU 的工作頻率，以 MHz 為單位 (百萬赫茲，一般而言近似於 CPU 每秒能夠處理的指令數)"

#: standalone/harddrake2:72
#, c-format
msgid "Flags"
msgstr "旗標"

#: standalone/harddrake2:72
#, c-format
msgid "CPU flags reported by the kernel"
msgstr ""

#: standalone/harddrake2:73
#, c-format
msgid "Fdiv bug"
msgstr ""

#: standalone/harddrake2:74
#, c-format
msgid "Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the required precision when performing a Floating point DIVision (FDIV)"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "Is FPU present"
msgstr ""

#: standalone/harddrake2:75
#, c-format
msgid "yes means the processor has an arithmetic coprocessor"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid "Whether the FPU has an irq vector"
msgstr ""

#: standalone/harddrake2:76
#, c-format
msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "F00f bug"
msgstr ""

#: standalone/harddrake2:77
#, c-format
msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""

#: standalone/harddrake2:78
#, c-format
msgid "Halt bug"
msgstr ""

#: standalone/harddrake2:79
#, c-format
msgid "Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used"
msgstr ""

#: standalone/harddrake2:80
#, c-format
msgid "sub generation of the cpu"
msgstr ""

#: standalone/harddrake2:81
#, c-format
msgid "generation of the cpu (eg: 8 for Pentium III, ...)"
msgstr ""

#: standalone/harddrake2:82
#, c-format
msgid "Model name"
msgstr "模組名稱"

#: standalone/harddrake2:82
#, c-format
msgid "official vendor name of the cpu"
msgstr "官方的 CPU 名稱"

#: standalone/harddrake2:83
#, c-format
msgid "the name of the CPU"
msgstr "CPU 的名稱"

#: standalone/harddrake2:84
#, c-format
msgid "Processor ID"
msgstr "處理器 ID"

#: standalone/harddrake2:84
#, c-format
msgid "the number of the processor"
msgstr "處理器的編號"

#: standalone/harddrake2:85
#, c-format
msgid "Model stepping"
msgstr "模型步"

#: standalone/harddrake2:85
#, c-format
msgid "stepping of the cpu (sub model (generation) number)"
msgstr ""

#: standalone/harddrake2:86
#, c-format
msgid "the vendor name of the processor"
msgstr "處理器的廠商名稱"

#: standalone/harddrake2:87
#, c-format
msgid "Write protection"
msgstr "寫入保護"

#: standalone/harddrake2:87
#, c-format
msgid "the WP flag in the CR0 register of the cpu enforce write protection at the memory page level, thus enabling the processor to prevent unchecked kernel accesses to user memory (aka this is a bug guard)"
msgstr ""

#: standalone/harddrake2:91
#, c-format
msgid "Floppy format"
msgstr "軟碟格式"

#: standalone/harddrake2:91
#, c-format
msgid "format of floppies supported by the drive"
msgstr ""

#: standalone/harddrake2:95
#, c-format
msgid "Channel"
msgstr "取消"

#: standalone/harddrake2:95
#, c-format
msgid "EIDE/SCSI channel"
msgstr "EIDE/SCSI 通道"

#: standalone/harddrake2:96
#, fuzzy, c-format
msgid "Disk identifier"
msgstr "印表機"

#: standalone/harddrake2:96
#, c-format
msgid "usually the disk serial number"
msgstr ""

#: standalone/harddrake2:97
#, fuzzy, c-format
msgid "Logical unit number"
msgstr "本機密碼檔"

#: standalone/harddrake2:97
#, c-format
msgid ""
"the SCSI target number (LUN). SCSI devices connected to a host are uniquely identified by a\n"
"channel number, a target id and a logical unit number"
msgstr ""

#. -PO: here, "size" is the size of the ram chip (eg: 128Mo, 256Mo, ...)
#: standalone/harddrake2:104
#, c-format
msgid "Installed size"
msgstr "已安裝的大小"

#: standalone/harddrake2:104
#, c-format
msgid "Installed size of the memory bank"
msgstr ""

#: standalone/harddrake2:105
#, fuzzy, c-format
msgid "Enabled Size"
msgstr "開啟"

#: standalone/harddrake2:105
#, c-format
msgid "Enabled size of the memory bank"
msgstr ""

#: standalone/harddrake2:106
#, fuzzy, c-format
msgid "type of the memory device"
msgstr "裝置的廠商名稱"

#: standalone/harddrake2:107
#, c-format
msgid "Speed"
msgstr "速度"

#: standalone/harddrake2:107
#, c-format
msgid "Speed of the memory bank"
msgstr ""

#: standalone/harddrake2:108
#, fuzzy, c-format
msgid "Bank connections"
msgstr "Cable 連線"

#: standalone/harddrake2:109
#, c-format
msgid "Socket designation of the memory bank"
msgstr ""

#: standalone/harddrake2:113
#, c-format
msgid "Device file"
msgstr "裝置檔案"

#: standalone/harddrake2:113
#, c-format
msgid "the device file used to communicate with the kernel driver for the mouse"
msgstr "這隻滑鼠用來與核心驅動程式溝通的裝置檔案"

#: standalone/harddrake2:114
#, c-format
msgid "Emulated wheel"
msgstr "模擬滾輪"

#: standalone/harddrake2:114
#, c-format
msgid "whether the wheel is emulated or not"
msgstr "是否模擬滾輪"

#: standalone/harddrake2:115
#, c-format
msgid "the type of the mouse"
msgstr "滑鼠的樣式"

#: standalone/harddrake2:116
#, c-format
msgid "the name of the mouse"
msgstr "滑鼠名稱"

#: standalone/harddrake2:117
#, c-format
msgid "Number of buttons"
msgstr "按鍵數"

#: standalone/harddrake2:117
#, c-format
msgid "the number of buttons the mouse has"
msgstr "滑鼠所擁有的按鍵數"

#: standalone/harddrake2:118
#, fuzzy, c-format
msgid "the type of bus on which the mouse is connected"
msgstr "請選取您滑鼠連接的序列埠。"

#: standalone/harddrake2:119
#, c-format
msgid "Mouse protocol used by X11"
msgstr ""

#: standalone/harddrake2:119
#, c-format
msgid "the protocol that the graphical desktop use with the mouse"
msgstr ""

#: standalone/harddrake2:126
#: standalone/harddrake2:135
#: standalone/harddrake2:142
#: standalone/harddrake2:150
#: standalone/harddrake2:316
#, c-format
msgid "Identification"
msgstr "辨別身份"

#: standalone/harddrake2:127
#: standalone/harddrake2:143
#, c-format
msgid "Connection"
msgstr "連線"

#: standalone/harddrake2:136
#, fuzzy, c-format
msgid "Performances"
msgstr "偏好"

#: standalone/harddrake2:137
#, fuzzy, c-format
msgid "Bugs"
msgstr "匯流排"

#: standalone/harddrake2:138
#, c-format
msgid "FPU"
msgstr ""

#: standalone/harddrake2:146
#, c-format
msgid "Partitions"
msgstr "磁碟分割區"

#: standalone/harddrake2:151
#, c-format
msgid "Features"
msgstr "功能"

#. -PO: please keep all "/" characters !!!
#: standalone/harddrake2:174
#: standalone/logdrake:77
#: standalone/printerdrake:134
#: standalone/printerdrake:147
#, c-format
msgid "/_Options"
msgstr "/選項 (_O)"

#: standalone/harddrake2:175
#: standalone/harddrake2:197
#: standalone/logdrake:79
#: standalone/printerdrake:159
#: standalone/printerdrake:161
#: standalone/printerdrake:164
#: standalone/printerdrake:166
#, c-format
msgid "/_Help"
msgstr "/說明 (_H)"

#: standalone/harddrake2:179
#, c-format
msgid "/Autodetect _printers"
msgstr "/自動偵測印表機 (_P)"

#: standalone/harddrake2:180
#, c-format
msgid "/Autodetect _modems"
msgstr "/自動偵測數據機 (_M)"

#: standalone/harddrake2:181
#, c-format
msgid "/Autodetect _jaz drives"
msgstr "/自動偵測 Jaz 裝置 (_J)"

#: standalone/harddrake2:188
#, c-format
msgid "/_Upload the hardware list"
msgstr ""

#: standalone/harddrake2:188
#: standalone/printerdrake:140
#, c-format
msgid "/_Quit"
msgstr "/結束 (_Q)"

#: standalone/harddrake2:199
#, c-format
msgid "/_Fields description"
msgstr "/欄位的描述資訊 (_F)"

#: standalone/harddrake2:201
#, c-format
msgid "Harddrake help"
msgstr "Harddrake 說明"

#: standalone/harddrake2:210
#, c-format
msgid "Once you've selected a device, you'll be able to see the device information in fields displayed on the right frame (\"Information\")"
msgstr ""

#: standalone/harddrake2:216
#: standalone/printerdrake:164
#, c-format
msgid "/_Report Bug"
msgstr "/報告錯誤 (_R)"

#: standalone/harddrake2:218
#: standalone/printerdrake:166
#, c-format
msgid "/_About..."
msgstr "/關於 (_A)"

#: standalone/harddrake2:219
#, c-format
msgid "About Harddrake"
msgstr "關於 Harddrake"

#. -PO: Do not alter the <span ..> and </span> tags
#: standalone/harddrake2:221
#, fuzzy, c-format
msgid ""
"This is HardDrake, a %s hardware configuration tool.\n"
"<span foreground=\"royalblue3\">Version:</span> %s\n"
"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;tvignaud@mandrakesoft.com&gt;\n"
"\n"
msgstr ""
"這是 HardDrake 程式, Mandrakelinux 所發展的硬體檢視設定工具。\n"
"<span foreground=\"royalblue3\">版本：</span> %s\n"
"<span foreground=\"royalblue3\">作者:</span> Thierry Vignaud &lt;tvignaud@mandrakesoft.com&gt;\n"
"\n"

#: standalone/harddrake2:238
#, fuzzy, c-format
msgid "Harddrake2"
msgstr "HardDrake 硬體偵測設定"

#: standalone/harddrake2:253
#, c-format
msgid "Detected hardware"
msgstr "已偵測到的硬體"

#: standalone/harddrake2:258
#, c-format
msgid "Configure module"
msgstr "設定模組"

#: standalone/harddrake2:265
#, c-format
msgid "Run config tool"
msgstr "執行設定程式"

#: standalone/harddrake2:303
#: standalone/net_monitor:108
#: standalone/net_monitor:109
#: standalone/net_monitor:114
#, c-format
msgid "unknown"
msgstr "不詳"

#: standalone/harddrake2:304
#: standalone/printerdrake:298
#: standalone/printerdrake:336
#, c-format
msgid "Unknown"
msgstr "未知的"

#: standalone/harddrake2:324
#, c-format
msgid "Misc"
msgstr "其它"

#: standalone/harddrake2:339
#, c-format
msgid "Click on a device in the left tree in order to display its information here."
msgstr ""

#: standalone/harddrake2:391
#, c-format
msgid "secondary"
msgstr ""

#: standalone/harddrake2:391
#, c-format
msgid "primary"
msgstr ""

#: standalone/harddrake2:395
#, c-format
msgid "burner"
msgstr "燒錄器"

#: standalone/harddrake2:395
#, c-format
msgid "DVD"
msgstr "DVD"

#: standalone/harddrake2:525
#, c-format
msgid "Upload the hardware list"
msgstr ""

#: standalone/harddrake2:530
#, c-format
msgid "Account:"
msgstr "帳號："

#: standalone/harddrake2:531
#, c-format
msgid "Password:"
msgstr "密碼："

#: standalone/harddrake2:532
#, c-format
msgid "Hostname:"
msgstr "主機名稱："

#: standalone/keyboarddrake:29
#, c-format
msgid "Please, choose your keyboard layout."
msgstr "請選取鍵盤排列的格式是那一種。"

#: standalone/keyboarddrake:45
#, c-format
msgid "Do you want the BackSpace to return Delete in console?"
msgstr "您希望 BackSpace 後退鍵能夠在 console 下回應 Delete 按鍵的功能嗎？"

#: standalone/localedrake:38
#, c-format
msgid "LocaleDrake"
msgstr "LocaleDrake"

#: standalone/localedrake:67
#, c-format
msgid "The change is done, but to be effective you must logout"
msgstr "變更已經完成，不過您需要重新登入才能夠生效"

#: standalone/logdrake:50
#, c-format
msgid "Mandrakelinux Tools Logs"
msgstr "Mandrake 工具紀錄"

#: standalone/logdrake:51
#, c-format
msgid "Logdrake"
msgstr "Logdrake"

#: standalone/logdrake:64
#, c-format
msgid "Show only for the selected day"
msgstr "僅顯示所選取日期"

#: standalone/logdrake:71
#, c-format
msgid "/File/_New"
msgstr "/檔案 (F)/新增 (_N)"

#: standalone/logdrake:71
#, c-format
msgid "<control>N"
msgstr "<control>N"

#: standalone/logdrake:72
#, c-format
msgid "/File/_Open"
msgstr "/檔案 (F)/開啟 (_O)"

#: standalone/logdrake:72
#, c-format
msgid "<control>O"
msgstr "<control>O"

#: standalone/logdrake:73
#, c-format
msgid "/File/_Save"
msgstr "/檔案 (F)/儲存 (_S)"

#: standalone/logdrake:73
#, c-format
msgid "<control>S"
msgstr "<control>S"

#: standalone/logdrake:74
#, c-format
msgid "/File/Save _As"
msgstr "/檔案 (F)/另存新檔 (_A)"

#: standalone/logdrake:75
#, c-format
msgid "/File/-"
msgstr "/檔案 (F)/-"

#: standalone/logdrake:78
#, c-format
msgid "/Options/Test"
msgstr "/選項 (O)/測試"

#: standalone/logdrake:80
#, c-format
msgid "/Help/_About..."
msgstr "/說明 (H)/關於 (_A)"

#: standalone/logdrake:109
#, c-format
msgid ""
"_:this is the auth.log log file\n"
"Authentication"
msgstr ""

#: standalone/logdrake:110
#, c-format
msgid ""
"_:this is the user.log log file\n"
"User"
msgstr ""

#: standalone/logdrake:111
#, c-format
msgid ""
"_:this is the /var/log/messages log file\n"
"Messages"
msgstr ""

#: standalone/logdrake:112
#, c-format
msgid ""
"_:this is the /var/log/syslog log file\n"
"Syslog"
msgstr ""

#: standalone/logdrake:116
#, c-format
msgid "search"
msgstr "尋找"

#: standalone/logdrake:128
#, c-format
msgid "A tool to monitor your logs"
msgstr "監察記錄檔的工具"

#: standalone/logdrake:129
#: standalone/net_monitor:99
#, c-format
msgid "Settings"
msgstr "設定"

#: standalone/logdrake:134
#, c-format
msgid "Matching"
msgstr "相配的"

#: standalone/logdrake:135
#, c-format
msgid "but not matching"
msgstr "但是不相配"

#: standalone/logdrake:139
#, c-format
msgid "Choose file"
msgstr "選取檔案"

#: standalone/logdrake:148
#, c-format
msgid "Calendar"
msgstr "行事曆"

#: standalone/logdrake:158
#, c-format
msgid "Content of the file"
msgstr "檔案內容"

#: standalone/logdrake:162
#: standalone/logdrake:399
#, c-format
msgid "Mail alert"
msgstr "郵件警示"

#: standalone/logdrake:169
#, c-format
msgid "The alert wizard has failed unexpectedly:"
msgstr "警示精靈無預警的結束："

#: standalone/logdrake:221
#, c-format
msgid "please wait, parsing file: %s"
msgstr "請稍候，正在解析檔案：%s"

#: standalone/logdrake:376
#, c-format
msgid "Apache World Wide Web Server"
msgstr "Apache WWW 伺服器"

#: standalone/logdrake:377
#, c-format
msgid "Domain Name Resolver"
msgstr "網域名稱解析器"

#: standalone/logdrake:378
#, c-format
msgid "Ftp Server"
msgstr "FTP 伺服器"

#: standalone/logdrake:379
#, c-format
msgid "Postfix Mail Server"
msgstr "Postfix 郵件伺服器"

#: standalone/logdrake:380
#, c-format
msgid "Samba Server"
msgstr "Samba 伺服器"

#: standalone/logdrake:382
#, c-format
msgid "Webmin Service"
msgstr "Webmin 服務"

#: standalone/logdrake:383
#, c-format
msgid "Xinetd Service"
msgstr "Xinetd 服務"

#: standalone/logdrake:394
#, fuzzy, c-format
msgid "Configure the mail alert system"
msgstr "設定郵件警示系統"

#: standalone/logdrake:395
#, c-format
msgid "Stop the mail alert system"
msgstr "停止郵件警示系統"

#: standalone/logdrake:402
#, c-format
msgid "Mail alert configuration"
msgstr "郵件警示通知組態設定"

#: standalone/logdrake:403
#, c-format
msgid ""
"Welcome to the mail configuration utility.\n"
"\n"
"Here, you'll be able to set up the alert system.\n"
msgstr ""
"歡迎來到郵件設定工具。\n"
"\n"
"在這裡, 您能夠設定您的警示通知的方式。\n"

#: standalone/logdrake:406
#, c-format
msgid "What do you want to do?"
msgstr "您想要做什麼？"

#: standalone/logdrake:413
#, c-format
msgid "Services settings"
msgstr "服務設定"

#: standalone/logdrake:414
#, c-format
msgid "You will receive an alert if one of the selected services is no longer running"
msgstr "若是您所選取的服務項目沒有執行的話，您將會收到警示通知"

#: standalone/logdrake:421
#, c-format
msgid "Load setting"
msgstr "載入設定"

#: standalone/logdrake:422
#, c-format
msgid "You will receive an alert if the load is higher than this value"
msgstr "當系統負載超過此數值時，您將會收到警示通知"

#: standalone/logdrake:423
#, c-format
msgid ""
"_: load here is a noun, the load of the system\n"
"Load"
msgstr ""

#: standalone/logdrake:428
#, fuzzy, c-format
msgid "Alert configuration"
msgstr "警示設定"

#: standalone/logdrake:429
#, c-format
msgid "Please enter your email address below "
msgstr "請於下方輸入你的 e-mail"

#: standalone/logdrake:430
#, c-format
msgid "and enter the name (or the IP) of the SMTP server you wish to use"
msgstr ""

#: standalone/logdrake:449
#, c-format
msgid "The wizard successfully configured the mail alert."
msgstr ""

#: standalone/logdrake:455
#, c-format
msgid "The wizard successfully disabled the mail alert."
msgstr ""

#: standalone/logdrake:514
#, c-format
msgid "Save as.."
msgstr "另存新檔..."

#: standalone/mousedrake:31
#, c-format
msgid "Please choose your mouse type."
msgstr "請選取滑鼠的形式。"

#: standalone/mousedrake:44
#, c-format
msgid "Emulate third button?"
msgstr "模擬三鍵式滑鼠？"

#: standalone/mousedrake:61
#, c-format
msgid "Mouse test"
msgstr "滑鼠測試"

#: standalone/mousedrake:64
#, c-format
msgid "Please test your mouse:"
msgstr "請測試您的滑鼠："

#: standalone/net_applet:34
#, c-format
msgid "Network is up on interface %s"
msgstr "網路已經由介面 %s 啟動"

#. -PO: keep the "Configure Network" substring synced with the "Configure Network" message below
#: standalone/net_applet:42
#, c-format
msgid "Network is down on interface %s. Click on \"Configure Network\""
msgstr "網路介面 %s 是關閉的。請點選 \"設定網路\""

#: standalone/net_applet:57
#: standalone/net_monitor:473
#, c-format
msgid "Connect %s"
msgstr "連線到 %s"

#: standalone/net_applet:58
#: standalone/net_monitor:473
#, c-format
msgid "Disconnect %s"
msgstr "中斷與 %s 的連線"

#: standalone/net_applet:59
#, c-format
msgid "Monitor Network"
msgstr "監控網路"

#: standalone/net_applet:60
#, c-format
msgid "Configure Network"
msgstr "設定網路"

#: standalone/net_applet:69
#, fuzzy, c-format
msgid "Watched interface"
msgstr "介面"

#: standalone/net_applet:78
#, c-format
msgid "Profiles"
msgstr ")定檔案"

#. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/net_applet:61
#: standalone/printerdrake:238
#, c-format
msgid "Refresh"
msgstr "重新載入"

#: standalone/net_applet:62
#, c-format
msgid "Get Online Help"
msgstr "取得線上說明"

#: standalone/net_applet:177
#, fuzzy, c-format
msgid "Interactive intrusion detection"
msgstr "印表機自動偵測"

#: standalone/net_applet:181
#, c-format
msgid "Always launch on startup"
msgstr "總是在啟動時執行"

#: standalone/net_applet:230
#, c-format
msgid "A port scanning attack has been attempted by %s."
msgstr "%s 試圖發動通訊埠掃描攻擊未遂。"

#: standalone/net_applet:231
#, c-format
msgid "The %s service has been attacked by %s."
msgstr "%s 服務被 %s 攻擊。"

#: standalone/net_applet:232
#, c-format
msgid "A password cracking attack has been attempted by %s."
msgstr "%s 試圖發動密碼破解攻擊未遂。"

#: standalone/net_applet:240
#, fuzzy, c-format
msgid "Active Firewall: intrusion detected"
msgstr "防火牆設定已經偵測到了!"

#: standalone/net_applet:251
#, c-format
msgid "Do you want to blacklist the attacker?"
msgstr "您要將攻擊者列入黑名單嗎？"

#: standalone/net_applet:265
#, c-format
msgid "Always blacklist (do not ask again)"
msgstr "總是自動列入黑名單 (不要再問)"

#: standalone/net_applet:268
#, c-format
msgid "Attack details"
msgstr "詳細的攻擊資訊"

#: standalone/net_applet:272
#, c-format
msgid "Attack time: %s"
msgstr "攻擊時間： %s"

#: standalone/net_applet:273
#, c-format
msgid "Network interface: %s"
msgstr "網路介面： %s"

#: standalone/net_applet:274
#, c-format
msgid "Attack type: %s"
msgstr "攻擊型態： %s"

#: standalone/net_applet:275
#, c-format
msgid "Protocol: %s"
msgstr "通訊協定： %s"

#: standalone/net_applet:276
#, c-format
msgid "Attacker IP address: %s"
msgstr "攻擊者 IP 位址： %s"

#: standalone/net_applet:277
#, c-format
msgid "Attacker hostname: %s"
msgstr "攻擊者主機名稱： %s"

#: standalone/net_applet:278
#, c-format
msgid "Service attacked: %s"
msgstr "被攻擊的服務： %s"

#: standalone/net_applet:279
#, c-format
msgid "Port attacked: %s"
msgstr "被攻擊的連接埠： %s"

#: standalone/net_applet:280
#, c-format
msgid "Type of ICMP attack: %s"
msgstr "ICMP 的攻擊型態： %s"

#: standalone/net_monitor:61
#: standalone/net_monitor:66
#, c-format
msgid "Network Monitoring"
msgstr "網路監控"

#: standalone/net_monitor:104
#, c-format
msgid "Global statistics"
msgstr ""

#: standalone/net_monitor:107
#, c-format
msgid "Instantaneous"
msgstr "瞬間"

#: standalone/net_monitor:107
#, c-format
msgid "Average"
msgstr "平均"

#: standalone/net_monitor:108
#, c-format
msgid ""
"Sending\n"
"speed:"
msgstr ""
"上傳\n"
"速度："

#: standalone/net_monitor:109
#, c-format
msgid ""
"Receiving\n"
"speed:"
msgstr ""
"下載\n"
"速度："

#: standalone/net_monitor:113
#, c-format
msgid ""
"Connection\n"
"time: "
msgstr ""
"連線\n"
"時間： "

#: standalone/net_monitor:120
#, c-format
msgid "Use same scale for received and transmitted"
msgstr "對接收與傳送使用相同的度量"

#: standalone/net_monitor:139
#, c-format
msgid "Wait please, testing your connection..."
msgstr "請稍候，正在測試您的連線..."

#: standalone/net_monitor:188
#: standalone/net_monitor:201
#, c-format
msgid "Disconnecting from Internet "
msgstr "正在中斷與網際網路的連線"

#: standalone/net_monitor:188
#: standalone/net_monitor:201
#, c-format
msgid "Connecting to Internet "
msgstr "連線到網際網路"

#: standalone/net_monitor:232
#, c-format
msgid "Disconnection from Internet failed."
msgstr "中斷與網際網路的連線失敗。"

#: standalone/net_monitor:233
#, c-format
msgid "Disconnection from Internet complete."
msgstr "成功的中斷與網際網路的連線。"

#: standalone/net_monitor:235
#, c-format
msgid "Connection complete."
msgstr "連線完成。"

#: standalone/net_monitor:236
#, c-format
msgid ""
"Connection failed.\n"
"Verify your configuration in the Mandrakelinux Control Center."
msgstr ""
"連線失敗。\n"
"請檢查您在 Mandrakelinux 控制中心的設定。"

#: standalone/net_monitor:340
#, c-format
msgid "Color configuration"
msgstr "顏色設定"

#: standalone/net_monitor:388
#: standalone/net_monitor:408
#, c-format
msgid "sent: "
msgstr "傳送："

#: standalone/net_monitor:395
#: standalone/net_monitor:412
#, c-format
msgid "received: "
msgstr "接收："

#: standalone/net_monitor:402
#, c-format
msgid "average"
msgstr "平均"

#: standalone/net_monitor:405
#, fuzzy, c-format
msgid "Local measure"
msgstr "LocaleDrake"

#: standalone/net_monitor:466
#, fuzzy, c-format
msgid "Warning, another internet connection has been detected, maybe using your network"
msgstr "警告，偵測到您系統上有其他的網路連線，也許正在使用您的網路服務"

#: standalone/net_monitor:477
#, c-format
msgid "No internet connection configured"
msgstr "沒有設定好的網路連線設定"

#: standalone/printerdrake:68
#, c-format
msgid "Reading data of installed printers..."
msgstr "正在讀取已安裝的印表機的資料..."

#: standalone/printerdrake:116
#, c-format
msgid "%s Printer Management Tool"
msgstr "%s 印表機管理工具"

#: standalone/printerdrake:130
#: standalone/printerdrake:131
#: standalone/printerdrake:132
#: standalone/printerdrake:133
#: standalone/printerdrake:141
#: standalone/printerdrake:142
#: standalone/printerdrake:146
#, c-format
msgid "/_Actions"
msgstr "/動作 (_A)"

#: standalone/printerdrake:130
#: standalone/printerdrake:142
#, c-format
msgid "/_Add Printer"
msgstr "/新增印表機 (_A)"

#: standalone/printerdrake:131
#, c-format
msgid "/Set as _Default"
msgstr "/指定為預設印表機 (_D)"

#: standalone/printerdrake:132
#, c-format
msgid "/_Edit"
msgstr "/編輯 (_E)"

#: standalone/printerdrake:133
#, c-format
msgid "/_Delete"
msgstr "/刪除 (_D)"

#: standalone/printerdrake:134
#, c-format
msgid "/_Expert mode"
msgstr "/專家模式 (_E)"

#: standalone/printerdrake:139
#, c-format
msgid "/_Refresh"
msgstr "/更新 (_R)"

#: standalone/printerdrake:146
#, c-format
msgid "/_Configure CUPS"
msgstr "/設定 _CUPS"

#: standalone/printerdrake:181
#, c-format
msgid "Search:"
msgstr "搜尋："

#: standalone/printerdrake:184
#, c-format
msgid "Apply filter"
msgstr "套用過濾器"

#: standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Def."
msgstr "預設"

#: standalone/printerdrake:211
#: standalone/printerdrake:218
#, c-format
msgid "Printer Name"
msgstr "印表機名稱"

#: standalone/printerdrake:211
#, c-format
msgid "Connection Type"
msgstr "連線類型"

#: standalone/printerdrake:218
#, c-format
msgid "Server Name"
msgstr "伺服器名稱"

#. -PO: "Add Printer" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:226
#, c-format
msgid "Add Printer"
msgstr "新增"

#: standalone/printerdrake:226
#, c-format
msgid "Add a new printer to the system"
msgstr "新增一台印表機到系統"

#. -PO: "Set as default" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:229
#, c-format
msgid "Set as default"
msgstr "設為預設"

#: standalone/printerdrake:229
#, c-format
msgid "Set selected printer as the default printer"
msgstr "使用這台印表機為預設印表機"

#: standalone/printerdrake:232
#, c-format
msgid "Edit selected printer"
msgstr "編輯選取的印表機"

#: standalone/printerdrake:235
#, c-format
msgid "Delete selected printer"
msgstr "刪除選取的印表機"

#: standalone/printerdrake:238
#, c-format
msgid "Refresh the list"
msgstr "更新列表"

#. -PO: "Configure CUPS" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: standalone/printerdrake:241
#, c-format
msgid "Configure CUPS"
msgstr "設定 CUPS"

#: standalone/printerdrake:241
#, c-format
msgid "Configure CUPS printing system"
msgstr "設定 CUPS 列印系統"

#: standalone/printerdrake:299
#: standalone/printerdrake:337
#, c-format
msgid "Enabled"
msgstr "使用"

#: standalone/printerdrake:300
#: standalone/printerdrake:338
#, c-format
msgid "Disabled"
msgstr "不使用"

#: standalone/printerdrake:560
#, c-format
msgid "Authors: "
msgstr "作者："

#. -PO: here %s is the version number
#: standalone/printerdrake:570
#, c-format
msgid "Printer Management %s"
msgstr "列印機管理 %s"

#: standalone/scannerdrake:51
#, c-format
msgid ""
"SANE packages need to be installed to use scanners.\n"
"\n"
"Do you want to install the SANE packages?"
msgstr ""
"要使用掃描器需要安裝套件 SANE。\n"
"\n"
"您要安裝它嗎？"

#: standalone/scannerdrake:55
#, c-format
msgid "Aborting Scannerdrake."
msgstr "略過 Scannerdrake。"

#: standalone/scannerdrake:60
#, c-format
msgid "Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr "無法安裝使用 Scannerdrake 設定掃描器所需的套件。"

#: standalone/scannerdrake:61
#, c-format
msgid "Scannerdrake will not be started now."
msgstr "Scannerdrake 將不會啟動。"

#: standalone/scannerdrake:67
#: standalone/scannerdrake:491
#, c-format
msgid "Searching for configured scanners..."
msgstr "正在尋找已經設定好的掃描器..."

#: standalone/scannerdrake:71
#: standalone/scannerdrake:495
#, c-format
msgid "Searching for new scanners..."
msgstr "正在尋找新的掃描器..."

#: standalone/scannerdrake:79
#: standalone/scannerdrake:517
#, c-format
msgid "Re-generating list of configured scanners..."
msgstr "重新產生設定好的掃描器的列單..."

#: standalone/scannerdrake:101
#, c-format
msgid "The %s is not supported by this version of %s."
msgstr "%s 不被這個版本的 %s 所支援。"

#: standalone/scannerdrake:104
#, c-format
msgid "%s found on %s, configure it automatically?"
msgstr "找到了在 %2$s 上的 %1$s，要自動設定它嗎？"

#: standalone/scannerdrake:116
#, c-format
msgid "%s is not in the scanner database, configure it manually?"
msgstr "在掃描器資料庫內找不到此型號 - %s，您要手動設定嗎？"

#: standalone/scannerdrake:131
#, c-format
msgid "Select a scanner model"
msgstr "選取掃描器型號"

#: standalone/scannerdrake:132
#, c-format
msgid " ("
msgstr " ("

#: standalone/scannerdrake:133
#, c-format
msgid "Detected model: %s"
msgstr "偵測到的型號： %s"

#: standalone/scannerdrake:136
#, c-format
msgid "Port: %s"
msgstr "連接埠： %s"

#: standalone/scannerdrake:138
#: standalone/scannerdrake:141
#, c-format
msgid " (UNSUPPORTED)"
msgstr " (不支援)"

#: standalone/scannerdrake:144
#, c-format
msgid "The %s is not supported under Linux."
msgstr "%s 不被 Linux 所支援。"

#: standalone/scannerdrake:171
#: standalone/scannerdrake:185
#, c-format
msgid "Do not install firmware file"
msgstr "不要安裝韌體檔"

#: standalone/scannerdrake:175
#: standalone/scannerdrake:227
#, c-format
msgid "It is possible that your %s needs its firmware to be uploaded everytime when it is turned on."
msgstr "您的 %s 可能每次啟動時都需要下載它的韌體檔。"

#: standalone/scannerdrake:176
#: standalone/scannerdrake:228
#, c-format
msgid "If this is the case, you can make this be done automatically."
msgstr "如果是這種情況，您可以自動的完成這個工作。"

#: standalone/scannerdrake:177
#: standalone/scannerdrake:231
#, c-format
msgid "To do so, you need to supply the firmware file for your scanner so that it can be installed."
msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。"

#: standalone/scannerdrake:178
#: standalone/scannerdrake:232
#, c-format
msgid "You find the file on the CD or floppy coming with the scanner, on the manufacturer's home page, or on your Windows partition."
msgstr "您可以在隨著您掃描器附上的光碟或磁片、廠商的網頁、或者是您的 Windows 磁區上找到這個檔案。"

#: standalone/scannerdrake:180
#: standalone/scannerdrake:239
#, c-format
msgid "Install firmware file from"
msgstr "安裝韌體檔，由"

#: standalone/scannerdrake:200
#, c-format
msgid "Select firmware file"
msgstr "選擇韌體案"

#: standalone/scannerdrake:203
#: standalone/scannerdrake:262
#, c-format
msgid "The firmware file %s does not exist or is unreadable!"
msgstr "韌體檔 %s 不存在或者無法讀取！"

#: standalone/scannerdrake:226
#, c-format
msgid "It is possible that your scanners need their firmware to be uploaded everytime when they are turned on."
msgstr "這可能是因為您的掃描器每次啟動時都需要下載它的韌體檔。"

#: standalone/scannerdrake:230
#, c-format
msgid "To do so, you need to supply the firmware files for your scanners so that it can be installed."
msgstr "要這樣作的話，請提供您掃描器的韌體檔以供安裝。"

#: standalone/scannerdrake:233
#, c-format
msgid "If you have already installed your scanner's firmware you can update the firmware here by supplying the new firmware file."
msgstr ""

#: standalone/scannerdrake:235
#, fuzzy, c-format
msgid "Install firmware for the"
msgstr "安裝"

#: standalone/scannerdrake:258
#, c-format
msgid "Select firmware file for the %s"
msgstr "選取 %s 的韌體檔"

#: standalone/scannerdrake:276
#, c-format
msgid "Could not install the firmware file for the %s!"
msgstr "無法安裝 %s 的韌體檔！"

#: standalone/scannerdrake:289
#, c-format
msgid "The firmware file for your %s was successfully installed."
msgstr "%s 的韌體檔安裝成功。"

#: standalone/scannerdrake:299
#, c-format
msgid "The %s is unsupported"
msgstr "不支援 %s"

#: standalone/scannerdrake:304
#, c-format
msgid ""
"The %s must be configured by printerdrake.\n"
"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""

#: standalone/scannerdrake:308
#: standalone/scannerdrake:315
#: standalone/scannerdrake:345
#, fuzzy, c-format
msgid "Auto-detect available ports"
msgstr "自動偵測印表機 (_P)"

#: standalone/scannerdrake:310
#: standalone/scannerdrake:356
#, c-format
msgid "Please select the device where your %s is attached"
msgstr ""

#: standalone/scannerdrake:311
#, c-format
msgid "(Note: Parallel ports cannot be auto-detected)"
msgstr "(注意：平行埠無法自動偵測)"

#: standalone/scannerdrake:313
#: standalone/scannerdrake:358
#, c-format
msgid "choose device"
msgstr "選取裝置"

#: standalone/scannerdrake:347
#, c-format
msgid "Searching for scanners..."
msgstr "正在尋找掃描器..."

#: standalone/scannerdrake:383
#, c-format
msgid "Setting up kernel modules..."
msgstr "正在設定核心模組..."

#: standalone/scannerdrake:390
#: standalone/scannerdrake:397
#, c-format
msgid "Attention!"
msgstr "注意！"

#: standalone/scannerdrake:391
#, c-format
msgid ""
"Your %s cannot be configured fully automatically.\n"
"\n"
"Manual adjustments are required. Please edit the configuration file /etc/sane.d/%s.conf. "
msgstr ""

#: standalone/scannerdrake:392
#: standalone/scannerdrake:401
#, c-format
msgid "More info in the driver's manual page. Run the command \"man sane-%s\" to read it."
msgstr ""

#: standalone/scannerdrake:394
#: standalone/scannerdrake:403
#, c-format
msgid "After that you may scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:398
#, c-format
msgid "Your %s has been configured, but it is possible that additional manual adjustments are needed to get it to work. "
msgstr ""

#: standalone/scannerdrake:399
#, c-format
msgid "If it does not appear in the list of configured scanners in the main window of Scannerdrake or if it does not work correctly, "
msgstr ""

#: standalone/scannerdrake:400
#, c-format
msgid "edit the configuration file /etc/sane.d/%s.conf. "
msgstr "編輯設定檔 /etc/sane.d/%s.conf。"

#: standalone/scannerdrake:406
#, c-format
msgid ""
"Your %s has been configured.\n"
"You may now scan documents using \"XSane\" or \"Kooka\" from Multimedia/Graphics in the applications menu."
msgstr ""

#: standalone/scannerdrake:431
#, c-format
msgid ""
"The following scanners\n"
"\n"
"%s\n"
"are available on your system.\n"
msgstr ""
"下列掃描器\n"
"\n"
"%s\n"
"可以在您的系統上使用。\n"

#: standalone/scannerdrake:432
#, c-format
msgid ""
"The following scanner\n"
"\n"
"%s\n"
"is available on your system.\n"
msgstr ""
"下列掃描器\n"
"\n"
"%s\n"
"可以在您的系統上使用。\n"

#: standalone/scannerdrake:435
#: standalone/scannerdrake:438
#, c-format
msgid "There are no scanners found which are available on your system.\n"
msgstr "沒有找到可以在您系統上使用的掃描器。\n"

#: standalone/scannerdrake:452
#, c-format
msgid "Search for new scanners"
msgstr "搜尋新的掃描器"

#: standalone/scannerdrake:458
#, c-format
msgid "Add a scanner manually"
msgstr "手動加入掃描器"

#: standalone/scannerdrake:465
#, c-format
msgid "Install/Update firmware files"
msgstr "安裝/更新韌體"

#: standalone/scannerdrake:471
#, c-format
msgid "Scanner sharing"
msgstr "掃描器分享"

#: standalone/scannerdrake:530
#: standalone/scannerdrake:695
#, c-format
msgid "All remote machines"
msgstr "所有的遠端機器"

#: standalone/scannerdrake:542
#: standalone/scannerdrake:845
#, c-format
msgid "This machine"
msgstr "本機"

#: standalone/scannerdrake:582
#, c-format
msgid "Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines."
msgstr ""

#: standalone/scannerdrake:583
#, c-format
msgid "You can also decide here whether scanners on remote machines should be made available on this machine."
msgstr ""

#: standalone/scannerdrake:586
#, c-format
msgid "The scanners on this machine are available to other computers"
msgstr "本機的掃描器可以被其他的電腦使用"

#: standalone/scannerdrake:588
#, c-format
msgid "Scanner sharing to hosts: "
msgstr "分享掃描器給主機："

#: standalone/scannerdrake:602
#, c-format
msgid "Use scanners on remote computers"
msgstr "使用遠端電腦上的掃描器"

#: standalone/scannerdrake:605
#, c-format
msgid "Use the scanners on hosts: "
msgstr "使用掃描器於主機："

#: standalone/scannerdrake:632
#: standalone/scannerdrake:704
#: standalone/scannerdrake:854
#, c-format
msgid "Sharing of local scanners"
msgstr "本地端掃描器分享"

#: standalone/scannerdrake:633
#, c-format
msgid "These are the machines on which the locally connected scanner(s) should be available:"
msgstr ""

#: standalone/scannerdrake:644
#: standalone/scannerdrake:794
#, c-format
msgid "Add host"
msgstr "新增主機"

#: standalone/scannerdrake:650
#: standalone/scannerdrake:800
#, c-format
msgid "Edit selected host"
msgstr "編輯選擇的主機"

#: standalone/scannerdrake:659
#: standalone/scannerdrake:809
#, c-format
msgid "Remove selected host"
msgstr "移除選取的主機"

#: standalone/scannerdrake:683
#: standalone/scannerdrake:691
#: standalone/scannerdrake:696
#: standalone/scannerdrake:742
#: standalone/scannerdrake:833
#: standalone/scannerdrake:841
#: standalone/scannerdrake:846
#: standalone/scannerdrake:892
#, c-format
msgid "Name/IP address of host:"
msgstr "主機的名稱/IP 位址："

#: standalone/scannerdrake:705
#: standalone/scannerdrake:855
#, c-format
msgid "Choose the host on which the local scanners should be made available:"
msgstr ""

#: standalone/scannerdrake:716
#: standalone/scannerdrake:866
#, c-format
msgid "You must enter a host name or an IP address.\n"
msgstr "請輸入主機名稱或是 IP\n"

#: standalone/scannerdrake:727
#: standalone/scannerdrake:877
#, fuzzy, c-format
msgid "This host is already in the list, it cannot be added again.\n"
msgstr "這個主機/網路已經存在於列表中，無法重複新增\n"

#: standalone/scannerdrake:782
#, fuzzy, c-format
msgid "Usage of remote scanners"
msgstr "使用未用到的空間"

#: standalone/scannerdrake:783
#, c-format
msgid "These are the machines from which the scanners should be used:"
msgstr ""

#: standalone/scannerdrake:940
#, fuzzy, c-format
msgid ""
"saned needs to be installed to share the local scanner(s).\n"
"\n"
"Do you want to install the saned package?"
msgstr "這個 %s 套件需要安裝上, 您要安裝該套件嗎？"

#: standalone/scannerdrake:944
#: standalone/scannerdrake:948
#, fuzzy, c-format
msgid "Your scanner(s) will not be available on the network."
msgstr "您的掃描器將只供擁有管理者權限的使用者使用。"

#: standalone/service_harddrake:104
#, c-format
msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr "位於 \"%s\" 的硬體類別項目已經移除：\n"

#: standalone/service_harddrake:105
#, c-format
msgid "- %s was removed\n"
msgstr ""

#: standalone/service_harddrake:108
#, fuzzy, c-format
msgid "Some devices were added: %s\n"
msgstr "滑鼠裝置: %s\n"

#: standalone/service_harddrake:109
#, c-format
msgid "- %s was added\n"
msgstr ""

#: standalone/service_harddrake:204
#, fuzzy, c-format
msgid "Hardware probing in progress"
msgstr "正在偵測中"

#: standalone/service_harddrake_confirm:7
#, c-format
msgid "Hardware changes in \"%s\" class (%s seconds to answer)"
msgstr ""

#: standalone/service_harddrake_confirm:8
#, fuzzy, c-format
msgid "Do you want to run the appropriate config tool?"
msgstr "您想要測試設定值嗎?"

#: steps.pm:14
#, c-format
msgid "Language"
msgstr "語言"

#: steps.pm:15
#, c-format
msgid "License"
msgstr "授權"

#: steps.pm:16
#, c-format
msgid "Configure mouse"
msgstr "設定滑鼠"

#: steps.pm:17
#, c-format
msgid "Hard drive detection"
msgstr "硬碟偵測"

#: steps.pm:18
#, c-format
msgid "Select installation class"
msgstr "選擇安裝類別"

#: steps.pm:19
#, c-format
msgid "Choose your keyboard"
msgstr "選取鍵盤形式"

#: steps.pm:21
#, c-format
msgid "Partitioning"
msgstr "分隔區"

#: steps.pm:22
#, c-format
msgid "Format partitions"
msgstr "硬碟格式化"

#: steps.pm:23
#, c-format
msgid "Choose packages to install"
msgstr "選取程式套件"

#: steps.pm:24
#, c-format
msgid "Install system"
msgstr "安裝系統"

#: steps.pm:25
#, fuzzy, c-format
msgid "Administrator password"
msgstr "設定 root 密碼"

#: steps.pm:26
#, c-format
msgid "Add a user"
msgstr "新增使用者"

#: steps.pm:27
#, c-format
msgid "Configure networking"
msgstr "設定網路連線"

#: steps.pm:28
#, c-format
msgid "Install bootloader"
msgstr "安裝開機程式"

#: steps.pm:29
#, c-format
msgid "Configure X"
msgstr "設定 X 環境"

#: steps.pm:31
#, c-format
msgid "Configure services"
msgstr "設定系統服務"

#: steps.pm:32
#, c-format
msgid "Install updates"
msgstr "安裝升級"

#: steps.pm:33
#, c-format
msgid "Exit install"
msgstr "離開安裝程式"

#: ugtk2.pm:900
#, c-format
msgid "Is this correct?"
msgstr "這樣子正確嗎？"

#: ugtk2.pm:960
#, c-format
msgid "No file chosen"
msgstr ""

#: ugtk2.pm:962
#, c-format
msgid "You have chosen a file, not a directory"
msgstr ""

#: ugtk2.pm:964
#, c-format
msgid "You have chosen a directory, not a file"
msgstr ""

#: ugtk2.pm:966
#, c-format
msgid "No such directory"
msgstr ""

#: ugtk2.pm:966
#, fuzzy, c-format
msgid "No such file"
msgstr "本地端檔案"

#: ugtk2.pm:1045
#, c-format
msgid "Expand Tree"
msgstr "展開樹狀結構"

#: ugtk2.pm:1046
#, c-format
msgid "Collapse Tree"
msgstr "縮疊樹狀結構"

#: ugtk2.pm:1047
#, c-format
msgid "Toggle between flat and group sorted"
msgstr "切換是否依照群組來加以排序"

#: wizards.pm:95
#, c-format
msgid ""
"%s is not installed\n"
"Click \"Next\" to install or \"Cancel\" to quit"
msgstr ""
"%s 沒有安裝\n"
"要安裝點選 \"Next 下一步\" 或 \"Cancel 取消\" 離開"

#: wizards.pm:99
#, c-format
msgid "Installation failed"
msgstr "安裝失敗"
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-10 15:42:43 +0000