summaryrefslogtreecommitdiffstats
path: root/perl-install/raid.pm
Commit message (Expand)AuthorAgeFilesLines
* (make): replace commands::modprobe by modules::load as it should (or??)Pascal Rigaux2001-01-301-1/+2
* no_commentPascal Rigaux2000-09-141-1/+1
* no_commentPascal Rigaux2000-09-131-6/+2
* no_commentPascal Rigaux2000-05-021-0/+2
* no_commentPascal Rigaux2000-03-141-1/+2
* no_commentPascal Rigaux2000-03-081-5/+3
* no_commentPascal Rigaux2000-01-191-1/+1
* no_commentPascal Rigaux2000-01-041-1/+1
* no_commentPascal Rigaux1999-12-171-1/+1
* no_commentPascal Rigaux1999-11-261-1/+2
* no_commentPascal Rigaux1999-11-221-1/+1
* no_commentPascal Rigaux1999-11-101-2/+3
* no_commentPascal Rigaux1999-11-091-2/+19
* no_commentPascal Rigaux1999-11-091-5/+17
* no_commentPascal Rigaux1999-11-091-0/+19
* no_commentPascal Rigaux1999-11-091-0/+112
' href='#n185'>185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634
package Xconfigurator; # $Id$

use diagnostics;
use strict;
use vars qw($in $do_pkgs @window_managers @depths @monitorSize2resolution @hsyncranges %min_hsync4wres @vsyncranges %depths @resolutions %serversdriver @svgaservers @accelservers @allbutfbservers @allservers @allbutfbdrivers @alldrivers %vgamodes %videomemory @ramdac_name @ramdac_id @clockchip_name @clockchip_id %keymap_translate %standard_monitors $XF86firstchunk_text $keyboardsection_start $keyboardsection_start_v4 $keyboardsection_part2 $keyboardsection_part3 $keyboardsection_part3_v4 $keyboardsection_end $pointersection_text $monitorsection_text1 $monitorsection_text2 $monitorsection_text3 $monitorsection_text4 $modelines_text_Trident_TG_96xx $modelines_text_ext $modelines_text $devicesection_text $devicesection_text_v4 $screensection_text1 %lines @options %xkb_options $good_default_monitor $low_default_monitor $layoutsection_v4 $modelines_text_apple);

use common;
use log;
use detect_devices;
use run_program;
use Xconfigurator_consts;
use any;
use modules;

my $tmpconfig = "/tmp/Xconfig";

my ($prefix, %monitors, %standard_monitors_);


sub xtest {
    my ($display) = @_;
    $::isStandalone ? 
      system("DISPLAY=$display /usr/X11R6/bin/xtest") == 0 : 
      c::Xtest($display);    
}

sub getVGAMode($) { $_[0]->{card}{vga_mode} || $vgamodes{"640x480x16"}; }

sub readCardsDB {
    my ($file) = @_;
    my ($card, %cards);

    my $F = common::openFileMaybeCompressed($file);

    my ($lineno, $cmd, $val) = 0;
    my $fs = {
        LINE => sub { push @{$card->{lines}}, $val unless $val eq "VideoRam" },
	NAME => sub {
	    $cards{$card->{type}} = $card if $card;
	    $card = { type => $val };
	},
	SEE => sub {
	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";

	    push @{$card->{lines}}, @{$c->{lines} || []};
	    add2hash($card->{flags}, $c->{flags});
	    add2hash($card, $c);
	},
	CHIPSET => sub {
	    $card->{chipset} = $val;
	    $card->{flags}{needChipset} = 1 if $val eq 'GeForce DDR';
	    $card->{flags}{needVideoRam} = 1 if member($val, qw(mgag10 mgag200 RIVA128 SiS6326));
	},
	SERVER => sub { $card->{server} = $val; },
	DRIVER => sub { $card->{driver} = $val; },
	RAMDAC => sub { $card->{ramdac} = $val; },
	DACSPEED => sub { $card->{dacspeed} = $val; },
	CLOCKCHIP => sub { $card->{clockchip} = $val; $card->{flags}{noclockprobe} = 1; },
	NOCLOCKPROBE => sub { $card->{flags}{noclockprobe} = 1 },
	UNSUPPORTED => sub { $card->{flags}{unsupported} = 1 },
	COMMENT => sub {},
    };

    local $_;
    while (<$F>) { $lineno++;
	s/\s+$//;
	/^#/ and next;
	/^$/ and next;
	/^END/ and do { $cards{$card->{type}} = $card if $card; last };

	($cmd, $val) = /(\S+)\s*(.*)/ or next; #log::l("bad line $lineno ($_)"), next;

	my $f = $fs->{$cmd};

	$f ? $f->() : log::l("unknown line $lineno ($_)");
    }
    \%cards;
}
sub readCardsNames {
    my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
    map { (split '=>')[0] } grep { !/^#/ } catMaybeCompressed($file);
}
sub cardName2RealName {
    my ($name) = @_;
    my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
    foreach (catMaybeCompressed($file)) {
	chop;
	next if /^#/;	  
	my ($name_, $real) = split '=>';
	return $real if $name eq $name_;
    }
    $name;
}
sub realName2CardName {
    my ($real) = @_;
    my $file = "$ENV{SHARE_PATH}/ldetect-lst/CardsNames";
    foreach (catMaybeCompressed($file)) {
	chop;
	next if /^#/;	  
	my ($name, $real_) = split '=>';
	return $name if $real eq $real_;
    }
    return;
}
sub updateCardAccordingName {
    my ($card, $name) = @_;
    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");

    add2hash($card->{flags}, $cards->{$name}{flags});
    add2hash($card, $cards->{$name});
    $card;
}

sub readMonitorsDB {
    my ($file) = @_;

    %monitors and return;

    my $F = common::openFileMaybeCompressed($file);
    local $_;
    my $lineno = 0; while (<$F>) {
	$lineno++;
	s/\s+$//;
	/^#/ and next;
	/^$/ and next;

	my @fields = qw(vendor type eisa hsyncrange vsyncrange dpms);
	my @l = split /\s*;\s*/;

	my %l; @l{@fields} = @l;
	if ($monitors{$l{type}}) {
	    my $i; for ($i = 0; $monitors{"$l{type} ($i)"}; $i++) {}
	    $l{type} = "$l{type} ($i)";
	}
	$monitors{"$l{vendor}|$l{type}"} = \%l;
    }
    while (my ($k, $v) = each %standard_monitors) {
	$monitors{'Generic|' . translate($k)} = $standard_monitors_{$k} = 
	  { hsyncrange => $v->[1], vsyncrange => $v->[2] };
    }
}

sub keepOnlyLegalModes {
    my ($card, $monitor) = @_;
    my $mem = 1024 * ($card->{memory} || ($card->{server} eq 'FBDev' ? 2048 : 32768)); #- limit to 2048x1536x64
    my $hsync = max(split(/[,-]/, $monitor->{hsyncrange}));

    while (my ($depth, $res) = each %{$card->{depth}}) {
	@$res = grep {
	    $mem >= product(@$_, $depth / 8) &&
	    $hsync >= ($min_hsync4wres{$_->[0]} || 0) &&
	    ($card->{server} ne 'FBDev' || $vgamodes{"$_->[0]x$_->[1]x$depth"})
	} @$res;
	delete $card->{depth}{$depth} if @$res == 0;
    }
}

sub cardConfigurationAuto() {
    my @cards;
    if (my @c = grep { $_->{driver} =~ /(Card|Server):/ } detect_devices::probeall()) {
	@c >= 2 && $c[0]{description} eq $c[1]{description} && $c[0]{description} =~ /82830 CGC/ and shift @c;
	foreach my $i (0..$#c) {
	    local $_ = $c[$i]->{driver};
	    my $card = { identifier => ($c[$i]{description} . (@c > 1 && " $i")) };
	    $card->{type} = $1 if /Card:(.*)/;
	    $card->{server} = $1 if /Server:(.*)/;
	    $card->{driver} = $1 if /Driver:(.*)/;
	    $card->{flags}{needVideoRam} = /86c368|S3 Inc|Tseng.*ET6\d00/;
	    $card->{busid} = "PCI:$c[$i]{pci_bus}:$c[$i]{pci_device}:$c[$i]{pci_function}";
	    push @{$card->{lines}}, @{$lines{$card->{identifier}} || []};
	    push @cards, $card;
	}
    }
    #- take a default on sparc if nothing has been found.
    if (arch() =~ /^sparc/ && !@cards) {
        log::l("Using probe with /proc/fb as nothing has been found!");
	local $_ = cat_("/proc/fb");
	if (/Mach64/) { push @cards, { server => "Mach64" } }
	elsif (/Permedia2/) { push @cards, { server => "3DLabs" } }
	else { push @cards, { server => "Sun24" } }
    }
    #- special case for dual head card using only one busid.
    @cards = map { my $dup = $_->{identifier} =~ /MGA G[45]50/ ? 2 : 1;
		   if ($dup > 1) {
		       my @result;
		       my $orig = $_;
		       foreach (1..$dup) {
			   my $card = {};
			   add2hash($card, $orig);
			   push @result, $card;
		       }
		       @result;
		   } else {
		       ($_);
		   }
	       } @cards;
    #- make sure no type are already used, duplicate both screen
    #- and rename type (because used as id).
    if (@cards > 1) {
	my $card = 1;
	foreach (@cards) {
	    updateCardAccordingName($_, $_->{type}) if $_->{type};
	    $_->{type} = "$_->{type} $card";
	    $card++;
	}
    }
    #- in case of only one cards, remove all busid reference, this will avoid
    #- need of change of it if the card is moved.
    #- on many PPC machines, card is on-board, busid is important, leave?
    @cards == 1 and delete $cards[0]{busid} if arch() !~ /ppc/;
    @cards;
}

sub cardConfiguration(;$$$) {
    my ($card, $noauto, $cardOptions) = @_;
    $card ||= {};

    updateCardAccordingName($card, $card->{type}) if $card->{type}; #- try to get info from given type
    undef $card->{type} unless $card->{server} || $card->{driver}; #- bad type as we can't find the server
    my @cards = cardConfigurationAuto();
    if (@cards > 1 && ($noauto || !$card->{server})) {#} && !$::isEmbedded) {
	my (%single_heads, @choices, $tc);
	my $configure_multi_head = sub {
	    add2hash($card, $cards[0]); #- assume good default.
	    delete $card->{cards} if $noauto;
	    $card->{cards} or $card->{cards} = \@cards;
	    $card->{force_xf4} = 1; #- force XF4 in such case.
	    $card->{Xinerama} = $_[0];
	};
	foreach (@cards) {
	    unless ($_->{driver} && !$_->{flags}{unsupported}) {
		log::l("found card \"$_->{identifier}\" not supported by XF4, disabling mutli-head support");
		$configure_multi_head = undef;
	    }
	    #- if more than one card use the same BusID, we have to use screen.
	    if ($single_heads{$_->{busid}}) {
		$single_heads{$_->{busid}}{screen} ||= 0;
		$_->{screen} = $single_heads{$_->{busid}}{screen} + 1;
	    }
	    $single_heads{$_->{busid}} = $_;
	}
	if ($configure_multi_head) {
	    push @choices, { text => _("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
	    push @choices, { text => _("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } };
	}
	foreach my $e (values %single_heads) {
	    push @choices, { text => _("Configure only card \"%s\" (%s)", $e->{identifier}, $e->{busid}),
			     code => sub { add2hash($card, $e); foreach (qw(cards screen Xinerama)) { delete $card->{$_} } } };
	}
	$tc = $in->ask_from_listf(_("Multi-head configuration"),
_("Your system support multiple head configuration.
What do you want to do?"), sub { translate($_[0]{text}) }, \@choices) or return; #- no more die, CHECK with auto that return ''!
	$tc->{code} and $tc->{code}();
    } else {
	#- only one head found, configure it as before.
	add2hash($card, $cards[0]) unless $noauto;
	delete $card->{cards}; delete $card->{Xinerama};
    }
    $card->{server} = 'FBDev' unless !$cardOptions->{allowFB} || $card->{server} || $card->{driver} || $card->{type} || $noauto;

    my $currentRealName = realName2CardName($card->{type} || $cards[0]{type}) || 'Other|Unlisted';
    $card->{type} = cardName2RealName($in->ask_from_treelist(_("Graphics card"),
							     _("Select a graphics card"), '|', ['Other|Unlisted', readCardsNames()],
							     $currentRealName))
      or return unless $card->{type} || $card->{server} || $card->{driver};

    updateCardAccordingName($card, $card->{type}) if $card->{type};
    add2hash($card, { vendor => "Unknown", board => "Unknown" });

    #- check to use XFree 4 or XFree 3.3.
    $card->{use_xf4} = $card->{driver} && !$card->{flags}{unsupported};
    $card->{force_xf4} ||= arch() =~ /ppc|ia64/; #- try to figure out ugly hack for PPC (recommend XF4 always so...)
    $card->{prefer_xf3} = !$card->{force_xf4} && ($card->{type} =~ /NeoMagic /);
    #- take into account current environment in standalone to keep
    #- the XFree86 version.
    if ($::isStandalone) {
	readlink("$prefix/etc/X11/X") =~ /XFree86/ and $card->{prefer_xf3} = 0;
	readlink("$prefix/etc/X11/X") =~ /XF86_/ and $card->{prefer_xf3} = !$card->{force_xf4};
    }

    #- manage X 3.3.6 or above 4.2.0 specific server or driver.
    if ($card->{type} eq 'Other|Unlisted') {
	undef $card->{type};

	my @list = ('server', $cardOptions->{allowFB} ? @allservers : @allbutfbservers);
	my $default_server = if_(!$card->{use_xf4} || $card->{prefer_xf3}, $card->{server} || $cards[0]{server}) || 'server';
	$card->{server} = $in->ask_from_list(_("X server"), _("Choose a X server"), \@list, $default_server) or return;

	if ($card->{server} eq 'server') {
	    my $fake_card = {};
	    updateCardAccordingName($fake_card, $cards[0]{type}) if $cards[0]{type};
	    $card->{server} = $card->{prefer_xf3} = undef;
	    $card->{use_xf4} = $card->{force_xf4} = 1;
	    $card->{driver} = $in->ask_from_list(_("X driver"), _("Choose a X driver"),
						 ($cardOptions->{allowFB} ? \@alldrivers : \@allbutfbdrivers),
						 $card->{driver} || $fake_card->{driver} || $cards[0]{driver}) or return;
	} else {
	    $card->{driver} = $card->{use_xf4} = $card->{force_xf4} = undef;
	    $card->{prefer_xf3} = 1;
	}
    }

    foreach ($card, @{$card->{cards} || []}) {
	$_->{memory} = 4096,  delete $_->{depth} if $_->{driver} eq 'i810';
	$_->{memory} = 16384, delete $_->{depth} if $_->{chipset} =~ /PERMEDIA/ && $_->{memory} <= 1024;
    }
    if (availableRamMB() > 800 || arch() =~ /ppc/) {
	#- No 3D XFree 3.3 for PPC
	#- and no Utah GLX if more than 800 Mb (server, or kernel-enterprise, Utha GLX does not work with latest).
	$card->{Utah_glx} = $card->{Utah_glx_EXPERIMENTAL} = '';
    } else {
	#- 3D acceleration configuration for XFree 3.3 using Utah-GLX.
	$card->{Utah_glx} = ($card->{identifier} =~ /Matrox.* G[24]00/ || #- 8bpp does not work.
			     $card->{identifier} =~ /Rage X[CL]/ ||
			     $card->{identifier} =~ /3D Rage (?:LT|Pro)/);
                             #- NOT WORKING $card->{type} =~ /Intel 810/);
	#- 3D acceleration configuration for XFree 3.3 using Utah-GLX
	#- but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED).
	$card->{Utah_glx_EXPERIMENTAL} = ($card->{identifier} =~ /[nN]Vidia.*T[nN]T2?/ || #- all RIVA/GeForce comes from NVIDIA ...
					  $card->{identifier} =~ /[nN]Vidia.*NV[56]/ ||   #- and may freeze (gltron).
					  $card->{identifier} =~ /[nN]Vidia.*Vanta/ ||
					  $card->{identifier} =~ /[nN]Vidia.*GeForce/ ||
					  $card->{identifier} =~ /[nN]Vidia.*NV1[15]/ ||
					  $card->{identifier} =~ /[nN]Vidia.*Quadro/ ||
					  $card->{identifier} =~ /Riva.*128/ || # moved here as not working correctly enough
					  $card->{identifier} =~ /S3.*Savage.*3D/ || #- only this one is evoluting.
					  $card->{identifier} =~ /Rage Mobility [PL]/ ||
					  $card->{identifier} =~ /SiS.*6C?326/ || #- prefer 16bit, other ?
					  $card->{identifier} =~ /SiS.*6C?236/ ||
					  $card->{identifier} =~ /SiS.*630/);
    }
    #- 3D acceleration configuration for XFree 4 using DRI.
    $card->{DRI_glx} = ($card->{identifier} =~ /Voodoo [35]|Voodoo Banshee/ || #- 16bit only
			$card->{identifier} =~ /Matrox.* G[245][05]0/ || #- prefer 16bit with AGP only
			$card->{identifier} =~ /8281[05].* CGC/ || #- 16bits (Intel 810 & 815).
			$card->{identifier} =~ /Radeon / || #- 16bits preferable ?
			$card->{identifier} =~ /Rage 128|Rage Mobility M/) && #- 16 and 32 bits, prefer 16bit as no DMA.
			  !($card->{identifier} =~ /Radeon 8500/); #- remove Radeon 8500 wich doesn't work with DRI (4.2).
    #- 3D acceleration configuration for XFree 4 using DRI but EXPERIMENTAL that may freeze the machine (FOR INFO NOT USED).
    $card->{DRI_glx_EXPERIMENTAL} = ($card->{identifier} =~ /SiS.*6C?326/ || #- prefer 16bit, other ?
				     $card->{identifier} =~ /SiS.*6C?236/ ||
				     $card->{identifier} =~ /SiS.*630/);
    #- 3D acceleration configuration for XFree 4 using NVIDIA driver (TNT, TN2 and GeForce cards only).
    $card->{NVIDIA_glx} = $cardOptions->{allowNVIDIA_rpms} && ($card->{identifier} =~ /[nN]Vidia.*T[nN]T2/ || #- TNT2 cards
							       $card->{identifier} =~ /[nN]Vidia.*NV[56]/ ||
							       $card->{identifier} =~ /[nN]Vidia.*Vanta/ ||
							       $card->{identifier} =~ /[nN]Vidia.*GeForce/ || #- GeForce cards
							       $card->{identifier} =~ /[nN]Vidia.*NV1[15]/ ||
							       $card->{identifier} =~ /[nN]Vidia.*Quadro/);

    #- hack for SiS 640 for laptop.
    if ($card->{identifier} =~ /SiS.*640/ and detect_devices::isLaptop()) {
	$card->{use_xf4} = $card->{force_xf4} = '';
	$card->{prefer_xf3} = 1;
	$card->{server} = 'FBDev';
    }

    #- XFree version available, better to parse available package and get version from it.
    my ($xf4_ver, $xf3_ver) = ("4.2.0", "3.3.6");
    #- basic installation, use of XFree 4.2 or XFree 3.3.
    my $xf3_tc = { text => _("XFree %s", $xf3_ver),
		   code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = ''; $card->{use_xf4} = '';
				 log::l("Using XFree $xf3_ver") } };
    my $msg = _("Which configuration of XFree do you want to have?");
    my @choices = $card->{use_xf4} ? (if_($card->{prefer_xf3}, $xf3_tc),
				      if_(!$card->{prefer_xf3} || $::expert || $noauto, 
					  { text => _("XFree %s", $xf4_ver),
					    code => sub { $card->{Utah_glx} = $card->{DRI_glx} = $card->{NVIDIA_glx} = '';
							  log::l("Using XFree $xf4_ver") } }),
				      if_(!$card->{prefer_xf3} && !$card->{force_xf4} && ($::expert || $noauto), $xf3_tc)) : $xf3_tc;
    #- try to figure if 3D acceleration is supported
    #- by XFree 3.3 but not XFree 4 then ask user to keep XFree 3.3 ?
    if ($card->{Utah_glx} && !$card->{force_xf4}) {
	$msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ?
_("Your card can have 3D hardware acceleration support but only with XFree %s.
Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
_("Your card can have 3D hardware acceleration support with XFree %s.", $xf3_ver)) . "\n\n\n" . $msg;
	$::expert || $noauto or @choices = (); #- keep it by default here as it is the only choice available.
	unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf3_ver),
			    code => sub { $card->{use_xf4} = '';
					  log::l("Using XFree $xf3_ver with 3D hardware acceleration") } };
    }

    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
    if ($::expert && $card->{use_xf4} && $card->{DRI_glx_EXPERIMENTAL} && !$card->{Xinerama}) {
	$msg =
_("Your card can have 3D hardware acceleration support with XFree %s,
NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf4_ver) . "\n\n\n" . $msg;
	push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf4_ver),
			 code => sub { $card->{DRI_glx} = 'EXPERIMENTAL';
				       log::l("Using XFree $xf4_ver with EXPERIMENTAL 3D hardware acceleration") } };
    }

    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration, currenlty
    #- this is with Utah GLX and so, it can provide a way of testing.
    if ($::expert && $card->{Utah_glx_EXPERIMENTAL} && !$card->{force_xf4}) {
	$msg = ($card->{use_xf4} && !($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{prefer_xf3} ?
_("Your card can have 3D hardware acceleration support but only with XFree %s,
NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.
Your card is supported by XFree %s which may have a better support in 2D.", $xf3_ver, $xf4_ver) :
_("Your card can have 3D hardware acceleration support with XFree %s,
NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", $xf3_ver)) . "\n\n\n" . $msg;
	push @choices, { text => _("XFree %s with EXPERIMENTAL 3D hardware acceleration", $xf3_ver),
			 code => sub { $card->{use_xf4} = ''; $card->{Utah_glx} = 'EXPERIMENTAL';
				       log::l("Using XFree $xf3_ver with EXPERIMENTAL 3D hardware acceleration") } };
    }

    #- ask the expert or any user on second pass user to enable or not hardware acceleration support.
    if ($card->{use_xf4} && ($card->{DRI_glx} || $card->{NVIDIA_glx}) && !$card->{Xinerama}) {
	$msg = _("Your card can have 3D hardware acceleration support with XFree %s.", $xf4_ver) . "\n\n\n" . $msg;
	$::expert || $noauto or @choices = (); #- keep all user by default with XFree 4 including 3D acceleration.
	unshift @choices, { text => _("XFree %s with 3D hardware acceleration", $xf4_ver),
			    code => sub { log::l("Using XFree $xf4_ver with 3D hardware acceleration") } };
    }
    if (arch() =~ /ppc/) {
	#- not much choice for PPC - we only have XF4, and Xpmac from the installer   
	@choices = { text => _("XFree %s", $xf4_ver), code => sub { $card->{xpmac} = ''; log::l("Using XFree $xf4_ver") } };
	push @choices, { text => _("Xpmac (installation display driver)"), code => sub { $card->{xpmac} = 1 }} if ($ENV{DISPLAY});
    }
    #- examine choice of user, beware the list MUST NOT BE REORDERED AS the first item should be the
    #- proposed one by DrakX.
    my $tc = $in->ask_from_listf(_("XFree configuration"), formatAlaTeX($msg), sub { translate($_[0]{text}) }, \@choices) or return;
    #- in case of class discarding, this can help ...
    $tc or $tc = $choices[0];
    $tc->{code} and $tc->{code}();
    
    if ($card->{xpmac} eq "1") {
	log::l("Use Xpmac - great...");
	#- define this stuff just so XF86Config isn't empty - we don't need it for Xpmac
	$card->{type} = "Xpmac Frame Buffer Driver";
	$card->{vendor} = $card->{board} = "None";
	$card->{driver} = $card->{server} = "Xpmac";
    }
    	
    $card->{prog} = "/usr/X11R6/bin/" . ($card->{use_xf4} ? 'XFree86' : $card->{server} =~ /Sun(.*)/ ?
					 "Xsun$1" : "XF86_$card->{server}");

    #- additional packages to install according available card.
    #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO)
    my @l = ();
    if ($card->{DRI_glx}) {
	push @l, 'Glide_V5' if $card->{identifier} =~ /Voodoo 5/;
	push @l, 'Glide_V3-DRI' if $card->{identifier} =~ /Voodoo (3|Banshee)/;
	push @l, 'XFree86-glide-module' if $card->{identifier} =~ /Voodoo/;
    } elsif ($card->{NVIDIA_glx}) {
	push @l, @{$cardOptions->{allowNVIDIA_rpms}};
    }
    if ($card->{Utah_glx}) {
	push @l, 'Mesa' if !$card->{use_xf4};
    }
    if ($card->{xpmac} eq "1") {
	push @l, 'XFree86-Xpmac';
	$card->{use_xf4} = '';
	$card->{prog} = "/usr/X11R6/bin/Xpmac";
	$card->{server} = 'Xpmac';
    }

    unless ($::g_auto_install) {
	if (-x "$prefix$card->{prog}") {
	    @l and $do_pkgs->install(@l);
	} else {
	    $do_pkgs->install($card->{use_xf4} ? 'XFree86-server' : "XFree86-$card->{server}", @l);
	}
	-x "$prefix$card->{prog}" or die "server $card->{server} is not available (should be in $prefix$card->{prog})";
    }

    #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else.
    if ($card->{identifier} =~ /Matrox.* G[24]00/ && $card->{identifier} !~ /AGP/) {
	log::l("disabling AGP mode for Matrox card, as it seems to be a PCI card");
	log::l("this is only used for XFree 3.3.6, see /etc/X11/glx.conf");
	substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$prefix/etc/X11/glx.conf";
    }
    #- make sure everything is correct at this point, packages have really been installed
    #- and driver and GLX extension is present.
    if ($card->{NVIDIA_glx} && !$card->{DRI_glx} && (-e "$prefix/usr/X11R6/lib/modules/drivers/nvidia_drv.o" &&
						     -e "$prefix/usr/X11R6/lib/modules/extensions/libglx.so")) {
	log::l("Using specific NVIDIA driver and GLX extensions");
	$card->{driver} = 'nvidia';
	foreach (@{$cardOptions->{allowNVIDIA_rpms}}) { #- hack as NVIDIA_kernel package does not do it actually (8.1 OEM).
	    if (/NVIDIA_kernel-([^\-]*)-([^\-]*)(?:-(.*))?/ && -e "$prefix/boot/System.map-$1-$2$3") {
		run_program::rooted($prefix, "/sbin/depmod", "-a", "-F", "/boot/System.map-$1-$2$3", "$1-$2$3");
	    }
	}
    } else {
	$card->{NVIDIA_glx} = '';
    }

    delete $card->{depth}{32} if $card->{type} =~ /S3 Trio3D|SiS/;
    $card->{options}{sw_cursor} = 1 if $card->{type} =~ /S3 Trio3D|SiS 6326/;
    unless ($card->{type}) {
	$card->{flags}{noclockprobe} = member($card->{server}, qw(I128 S3 S3V Mach64));
    }
    $card->{options_xf3}{power_saver} = 1;
    $card->{options_xf4}{DPMS} = 'on';

    $card->{flags}{needVideoRam} and
      $card->{memory} ||= $videomemory{$in->ask_from_list_('', _("Select the memory size of your graphics card"),
							   [ sort { $videomemory{$a} <=> $videomemory{$b} }
							     keys %videomemory]) || return};

    #- hack for ATI Mach64 cards where two options should be used if using Utah-GLX.
    if ($card->{identifier} =~ /Rage X[CL]/ ||
	$card->{identifier} =~ /Rage Mobility [PL]/ ||
	$card->{identifier} =~ /3D Rage (?:LT|Pro)/) {
	$card->{options_xf3}{no_font_cache} = $card->{Utah_glx};
	$card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx};
    }
    #- hack for SiS cards where an option should be used if using Utah-GLX.
    if ($card->{identifier} =~ /SiS.*6C?326/ ||
	$card->{identifier} =~ /SiS.*6C?236/ ||
	$card->{identifier} =~ /SiS.*630/) {
	$card->{options_xf3}{no_pixmap_cache} = $card->{Utah_glx};
    }

    #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default
    #- but for some there is a need to specify VideoRam (else it won't run).
    if ($card->{DRI_glx}) {
	$card->{identifier} =~ /Matrox.* G[245][05]0/ and $card->{flags}{needVideoRam} = 'fakeVideoRam';
	$card->{identifier} =~ /8281[05].* CGC/ and ($card->{flags}{needVideoRam}, $card->{memory}) = ('fakeVideoRam', 16384);
	#- always enable (as a reminder for people using a better AGP mode to change it at their own risk).
	$card->{options_xf4}{AGPMode} = '1';
	#- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange
	#- AND using DRI at the same time.
	if ($card->{identifier} =~ /Rage 128|Rage Mobility M/) {
	    $card->{options_xf4}{UseCCEFor2D} = (detect_devices::matching_desc('Bt8[47][89]') ||
						 detect_devices::matching_desc('TV') ||
						 detect_devices::matching_desc('AG GMV1')) ? 'true' : 'false';
	}
    }

    $card;
}

sub optionsConfiguration($) {
    my ($o) = @_;
    my @l;
    my %l;

    foreach (@options) {
	if ($o->{card}{server} eq $_->[1] && $o->{card}{identifier} =~ /$_->[2]/) {
	    my $options = 'options_' . ($o->{card}{server} eq 'XFree86' ? 'xf4' : 'xf3');
	    $o->{card}{$options}{$_->[0]} ||= 0;
	    unless ($l{$_->[0]}) {
		push @l, { label => $_->[0], val => \$o->{card}{$options}{$_->[0]}, type => 'bool' };
		$l{$_->[0]} = 1;
	    }
	}
    }
    @l = @l[0..9] if @l > 9; #- reduce list size to 10 for display

    $in->ask_from('', _("Choose options for server"), \@l);
}

sub monitorConfiguration(;$$) {
    my $monitor = shift || {};
    my $useFB = shift || 0;

    readMonitorsDB("$ENV{SHARE_PATH}/ldetect-lst/MonitorsDB");

    if ($monitor->{EISA_ID}) {
	log::l("EISA_ID: $monitor->{EISA_ID}");
	if (my ($mon) = grep { lc($_->{eisa}) eq $monitor->{EISA_ID} } values %monitors) {
	    add2hash($monitor, $mon);
	    log::l("EISA_ID corresponds to: $monitor->{type}");
	}
    }
    if ($monitor->{hsyncrange} && $monitor->{vsyncrange}) {
	add2hash($monitor, { type => "monitor1", vendor => "Unknown", model => "Unknown" });
	return $monitor;
    }

    my $good_default = (arch() =~ /ppc/ ? 'Apple|' : 'Generic|') . translate($good_default_monitor);
    $monitor->{type} ||=
      ($::auto_install ? $low_default_monitor :
       $in->ask_from_treelist(_("Monitor"), _("Choose a monitor"), '|', ['Custom', keys %monitors], $good_default));
    if ($monitor->{type} eq 'Custom') {
	$in->ask_from('',
_("The two critical parameters are the vertical refresh rate, which is the rate
at which the whole screen is refreshed, and most importantly the horizontal
sync rate, which is the rate at which scanlines are displayed.

It is VERY IMPORTANT that you do not specify a monitor type with a sync range
that is beyond the capabilities of your monitor: you may damage your monitor.
 If in doubt, choose a conservative setting."),
				  [ { val => \$monitor->{hsyncrange}, list => \@hsyncranges, label => _("Horizontal refresh rate"), not_edit => 0 },
				    { val => \$monitor->{vsyncrange}, list => \@vsyncranges, label => _("Vertical refresh rate"), not_edit => 0 } ]);
    } else {
	add2hash($monitor, $monitors{$monitor->{type}} || $standard_monitors_{$monitor->{type}});
    }
    add2hash($monitor, { type => "Unknown", vendor => "Unknown", model => "Unknown", manual => 1 });
}

sub testConfig($) {
    my ($o) = @_;
    my ($resolutions, $clocklines);

    write_XF86Config($o, $tmpconfig);

    unlink "/tmp/.X9-lock";
    #- restart_xfs;

    my $f = $tmpconfig . ($o->{card}{use_xf4} && "-4");
    local *F; open F, "$prefix$o->{card}{prog} :9 -probeonly -pn -xf86config $f 2>&1 |";
    local $_;
    while (<F>) {
	$o->{card}{memory} ||= $2 if /(videoram|Video RAM):\s*(\d*)/;

	# look for clocks
	push @$clocklines, $1 if /clocks: (.*)/ && !/(pixel |num)clocks:/;

	push @$resolutions, [ $1, $2 ] if /: Mode "(\d+)x(\d+)": mode clock/;
	print;
    }
    close F or die "X probeonly failed";

    ($resolutions, $clocklines);
}

sub testFinalConfig {
    my ($o, $auto, $skiptest, $skip_badcard) = @_;

    $o->{monitor}{hsyncrange} && $o->{monitor}{vsyncrange} or
      $in->ask_warn('', _("Monitor not configured")), return;

    $o->{card}{server} || $o->{card}{driver} or
      $in->ask_warn('', _("Graphics card not configured yet")), return;

    $o->{card}{depth} or
      $in->ask_warn('', _("Resolutions not chosen yet")), return;

    my $f = "/etc/X11/XF86Config.test";
    write_XF86Config($o, $::testing ? $tmpconfig : "$prefix/$f");

    $skiptest || $o->{card}{server} =~ 'FBDev|Sun' and return 1; #- avoid testing with these.

    #- needed for bad cards not restoring cleanly framebuffer, according to which version of XFree are used.
    my $bad_card = ($o->{card}{use_xf4} ?
		    $o->{card}{identifier} =~ /Matrox|Rage Mobility [PL]|SiS.*SG86C2.5|SiS.*559[78]|SiS.*300|SiS.*540|SiS.*6C?326|SiS.*6C?236|Tseng.*ET6\d00|Riva.*128/ :
		    $o->{card}{identifier} =~ /i740|Rage Mobility [PL]|3D Rage LT|Rage 128/);
    $::live and $bad_card ||= $o->{card}{identifier} =~ /S3.*ViRGE/;
    log::l("the graphics card does not like X in framebuffer") if $bad_card;

    my $verybad_card = $o->{card}{driver} eq 'i810' || $o->{card}{driver} eq 'fbdev';
    $verybad_card ||= $o->{card}{driver} eq 'nvidia' && !$::isStandalone; #- avoid testing during install at any price.
    $bad_card || $verybad_card and return 1; #- deactivating bad_card test too.

    my $mesg = _("Do you want to test the configuration?");
    my $def = 1;
    if ($bad_card && !$::isStandalone) {
	$skip_badcard and return 1;
	$mesg = $mesg . "\n" . _("Warning: testing this graphics card may freeze your computer");
	$def = 0;
    }
    $auto && $def or $in->ask_yesorno(_("Test of the configuration"), $mesg, $def) or return 1;

    unlink "$prefix/tmp/.X9-lock";

    #- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one
    #- that way, you can talk to :9 without doing a chroot
    #- but take care of non X11 install :-)
    if (-d "/tmp/.X11-unix") {
	symlinkf "$prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $prefix;
    } else {
	symlinkf "$prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $prefix;
    }
    #- restart_xfs;

    my $f_err = "$prefix/tmp/Xoutput";
    my $pid;
    unless ($pid = fork) {
	system("xauth add :9 . `mcookie`");
	open STDERR, ">$f_err";
	chroot $prefix if $prefix;
	exec $o->{card}{prog}, 
	  if_($o->{card}{prog} !~ /Xsun/, "-xf86config", ($::testing ? $tmpconfig : $f) . ($o->{card}{use_xf4} && "-4")),
	  ":9" or c::_exit(0);
    }

    do { sleep 1 } until xtest(":9") || waitpid($pid, c::WNOHANG());

    my $b = before_leaving { unlink $f_err };

    unless (xtest(":9")) {
	local $_;
	local *F; open F, $f_err;
      i: while (<F>) {
	    if ($o->{card}{use_xf4}) {
		if (/^\(EE\)/ && $_ !~ /Disabling/ || /^Fatal\b/) {
		    my @msg = !/error/ && $_ ;
		    while (<F>) {
			/reporting a problem/ and last;
			push @msg, $_;
			$in->ask_warn('', [ _("An error occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
			return 0;
		    }
		}
	    } else {
		if (/\b(error|not supported)\b/i) {
		    my @msg = !/error/ && $_ ;
		    while (<F>) {
			/not fatal/ and last i;
			/^$/ and last;
			push @msg, $_;
		    }
		    $in->ask_warn('', [ _("An error occurred:"), " ", @msg, _("\ntry to change some parameters") ]);
		    return 0;
		}
	    }
	}
    }

    $::noShadow = 1;
    local *F;
    open F, "|perl 2>/dev/null" or die '';
    print F "use lib qw(", join(' ', @INC), ");\n";
    print F q{
        require lang;
	use interactive_gtk;
        use my_gtk qw(:wrappers);

        $::isStandalone = 1;

        lang::bindtextdomain();

	$ENV{DISPLAY} = ":9";

        gtkset_background(200 * 257, 210 * 257, 210 * 257);
        my ($h, $w) = Gtk::Gdk::Window->new_foreign(Gtk::Gdk->ROOT_WINDOW)->get_size;
        $my_gtk::force_position = [ $w / 3, $h / 2.4 ];
	$my_gtk::force_focus = 1;
        my $text = Gtk::Label->new;
        my $time = 8;
        Gtk->timeout_add(1000, sub {
	    $text->set(_("Leaving in %d seconds", $time));
	    $time-- or Gtk->main_quit;
            1;
	});

        my $background = "/usr/share/pixmaps/backgrounds/linux-mandrake/XFdrake-image-test.jpg";
        my $qiv = "/usr/bin/qiv";
        -r "} . $prefix . q{/$background" && -x "} . $prefix . q{/$qiv" and
            system(($::testing ? "} . $prefix . q{" : "chroot } . $prefix . q{/ ") . "$qiv -y $background");

        my $in = interactive_gtk->new;
	$in->exit($in->ask_yesorno('', [ _("Is this the correct setting?"), $text ], 0) ? 0 : 222);
    };
    my $rc = close F;
    my $err = $?;

    unlink "/tmp/.X11-unix/X9" if $prefix;
    kill 2, $pid;
    $::noShadow = 0;

    $rc || $err == 222 << 8 or $in->ask_warn('', _("An error occurred, try to change some parameters"));
    $rc;
}

sub allowedDepth($) {
    my ($card) = @_;
    my %allowed_depth;

    if ($card->{Utah_glx} || $card->{DRI_glx}) {
	$allowed_depth{16} = 1; #- this is the default.
	$card->{identifier} =~ /Voodoo 5/ and $allowed_depth{24} = undef;
	$card->{identifier} =~ /Matrox.* G[245][05]0/ and $allowed_depth{24} = undef;
	$card->{identifier} =~ /Rage 128/ and $allowed_depth{24} = undef;
	$card->{identifier} =~ /Radeon/ and $allowed_depth{24} = undef;
    }
    
    for ($card->{server}) {
	#- this should work by default, FBDev is allowed only if install currently uses it at 16bpp.
	/FBDev/   and $allowed_depth{16} = 1;

	#- Sun servers, Sun24 handles 24,8,2; Sun only 8 and 2; and SunMono only 2.
	/^Sun24$/   and @allowed_depth{qw(24 8 2)} = (1);
	/^Sun$/     and @allowed_depth{qw(8 2)} = (1);
	/^SunMono$/ and @allowed_depth{qw(2)} = (1);
    }

    return %allowed_depth && \%allowed_depth; #- no restriction if false is returned.
}

sub autoDefaultDepth($$) {
    my ($card, $wres_wanted) = @_;
    my ($best, $depth);

    #- check for forced depth according to current environment.
    my $allowed_depth = allowedDepth($card);
    if ($allowed_depth) {
	foreach (keys %$allowed_depth) {
	    $allowed_depth->{$_} and return $_; #- a default depth is given.
	}
    }

    while (my ($d, $r) = each %{$card->{depth}}) {
	$allowed_depth && ! exists $allowed_depth->{$d} and next; #- reject depth.
	$depth = max($depth || 0, $d);

	#- try to have resolution_wanted
	$best = max($best || 0, $d) if $r->[0][0] >= $wres_wanted;
	$best = $card->{suggest_depth}, last if ($card->{suggest_depth} &&
						 $card->{suggest_wres} && $r->[0][0] >= $card->{suggest_wres});
    }
    $best || $depth or die "no valid modes";
}

sub autoDefaultResolution {
    #    return "1024x768" if detect_devices::hasPCMCIA;

    if (arch() =~ /ppc/) {
	return "1024x768" if detect_devices::get_mac_model =~ /^PowerBook|^iMac/;
    }
	
    my ($size) = @_;
    $monitorSize2resolution[round($size || 14)] || #- assume a small monitor (size is in inch)
    $monitorSize2resolution[-1]; #- no corresponding resolution for this size. It means a big monitor, take biggest we have
}

sub chooseResolutionsGtk($$;$) {
    my ($card, $chosen_depth, $chosen_w) = @_;

    require my_gtk;
    my_gtk->import(qw(:helpers :wrappers));

    my $W = my_gtk->new(_("Resolution"));
    my %txt2depth = reverse %depths;
    my ($r, $depth_combo, %w2depth, %w2h, %w2widget, $pix_monitor, $pix_colors, $w2_combo);
    $w2_combo = new Gtk::Combo;
    my $best_w;
    my $allowed_depth = allowedDepth($card);
    my %allowed_depth;
    while (my ($depth, $res) = each %{$card->{depth}}) {
	$allowed_depth && ! exists $allowed_depth->{$depth} and next; #- reject depth.
	foreach (@$res) {
	    ++$allowed_depth{$depth};
	    $w2h{$_->[0]} = $_->[1];
	    push @{$w2depth{$_->[0]}}, $depth;

	    $best_w = max($_->[0], $best_w) if $_->[0] <= $chosen_w;
	}
    }
    $chosen_w = $best_w;
    $chosen_w ||= 640; #- safe guard ?

    my $set_depth = sub { $depth_combo->entry->set_text(translate($depths{$chosen_depth})) };

    #- the set function is usefull to toggle the CheckButton with the callback being ignored
    my $ignore;
    my $no_human; # is the w2_combo->entry changed by a human?
    my $set = sub { $ignore = 1; $_[0] and $_[0]->set_active(1); $ignore = 0; };

    my %monitor;
    $monitor{$_} = [ gtkcreate_png("monitor-" . $_ . ".png") ] foreach (640, 800, 1024, 1280);
    $monitor{1152} = [ gtkcreate_png("monitor-" . 1024 . ".png") ];
    $monitor{1600} = [ gtkcreate_png("monitor-" . 1280 . ".png") ];

    my $pixmap_mo = new Gtk::Pixmap( $monitor{$chosen_w}[0]  , $monitor{$chosen_w}[1] );

    while (my ($w, $h) = each %w2h) {
	my $V = $w . "x" . $h;
	$w2widget{$w} = $r = new Gtk::RadioButton($r ? ($V, $r) : $V);
	if ($chosen_w == $w) {
	    &$set($r);
	}
	$r->signal_connect("clicked" => sub {
			       $ignore and return;
			       $chosen_w = $w;
			       $no_human=1;
			       $w2_combo->entry->set_text($w . "x" . $w2h{$w});
			       unless (member($chosen_depth, @{$w2depth{$w}})) {
				   $chosen_depth = max(@{$w2depth{$w}});
				   &$set_depth();
			       }
			   });
    }
    gtkadd($W->{window},
	   gtkpack_($W->create_box_with_title(_("Choose the resolution and the color depth"),
					      "(" . ($card->{type} ? 
						     _("Graphics card: %s", $card->{type}) :
						     _("XFree86 server: %s", $card->{server})) . ")"
					     ),
		    1, gtkpack2(new Gtk::VBox(0,0),
				gtkpack2__(new Gtk::VBox(0, $::isEmbedded ? 15 : 0),
					   if_($::isEmbedded, $pixmap_mo),
					   if_(!$::isEmbedded, map {$w2widget{$_} } ikeys(%w2widget)),
					   gtkpack2(new Gtk::HBox(0,0),
						    create_packtable({ col_spacings => 5, row_spacings => 5},
	     [ if_($::isEmbedded,$w2_combo) , new Gtk::Label("")],
	     [ $depth_combo = new Gtk::Combo, gtkadd(gtkset_shadow_type(new Gtk::Frame, 'etched_out'), $pix_colors = gtkpng ("colors")) ],
							     ),
						   ),
					  ),
			       ),
		    0, gtkadd($W->create_okcancel(_("Ok"), _("More")),
			      $::isEmbedded ?
			      gtksignal_connect(new Gtk::Button(_("Expert Mode")), clicked => sub { system ("XFdrake --expert"); }) :
			      gtksignal_connect(new Gtk::Button(_("Show all")), clicked => sub { $W->{retval} = 1; $chosen_w = 0; Gtk->main_quit })),
		    ));
    $depth_combo->disable_activate;
    $depth_combo->set_use_arrows_always(1);
    $depth_combo->entry->set_editable(0);
    $depth_combo->set_popdown_strings(map { translate($depths{$_}) } grep { $allowed_depth{$_} } ikeys(%{$card->{depth}}));
    $depth_combo->entry->signal_connect(changed => sub {
        $chosen_depth = $txt2depth{untranslate($depth_combo->entry->get_text, keys %txt2depth)};
        my $w = $card->{depth}{$chosen_depth}[0][0];
        $chosen_w > $w and &$set($w2widget{$chosen_w = $w});
	$pix_colors->set(gtkcreate_png(
               $chosen_depth >= 24 ? "colors.png" :
	       $chosen_depth >= 15 ? "colors16.png" :
	                             "colors8.png"));
    });
    if ($::isEmbedded) {
	$w2_combo->disable_activate;
	$w2_combo->set_use_arrows_always(1);
	$w2_combo->entry->set_editable(0);
	$w2_combo->set_popdown_strings(map { $_ . "x" . $w2h{$_} } keys %w2h);
	$w2_combo->entry->signal_connect(changed => sub {
	    ($chosen_w) = $w2_combo->entry->get_text =~ /([^x]*)x.*/;
	    $no_human ? $no_human=0 : $w2widget{$chosen_w}->set_active(1);
	    $pixmap_mo->set($monitor{$chosen_w}[0], $monitor{$chosen_w}[1]);
	});
    }
    &$set_depth();
    $W->{ok}->grab_focus;

    if ($::isEmbedded) {
	$no_human=1;
	$w2_combo->entry->set_text($chosen_w . "x" . $w2h{$chosen_w});
    }
    $W->main or return;
    ($chosen_depth, $chosen_w);
}

sub chooseResolutions($$;$) {
    goto &chooseResolutionsGtk if $in->isa('interactive_gtk');

    my ($card, $chosen_depth, $chosen_w) = @_;

    my $best_w;
    my $allowed_depth = allowedDepth($card);

    local $_ = $in->ask_from_list(_("Resolutions"), "", 
				  [ map_each { if_(!$allowed_depth || exists $allowed_depth->{$::a},
						   map { "$_->[0]x$_->[1] ${main::a}bpp" } @$::b) } %{$card->{depth}} ])
      or return;
    reverse /(\d+)x\S+ (\d+)/;
}


sub resolutionsConfiguration {
    my ($o, $auto) = @_;
    my $card = $o->{card};

    #- For the mono and vga16 server, no further configuration is required.
    if (member($card->{server}, "Mono", "VGA16")) {
	$card->{depth}{8} = [[ 640, 480 ]];
	return;
    } elsif ($card->{server} =~ /Sun/) {
	$card->{depth}{2} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono)$/;
	$card->{depth}{8} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun)$/;
	$card->{depth}{24} = [[ 1152, 864 ]] if $card->{server} =~ /^(SunMono|Sun|Sun24)$/;
	$card->{default_wres} = 1152;
	$o->{default_depth} = max(keys %{$card->{depth}});
	return 1; #- aka we cannot test, assumed as good (should be).
    }
    if (is_empty_hash_ref($card->{depth})) {
	$card->{depth}{$_} = [ map { [ split "x" ] } @resolutions ]
	  foreach @depths;
    }
    #- sort resolutions in each depth
    foreach (values %{$card->{depth}}) {
	my $i = 0;
	@$_ = grep { first($i != $_->[0], $i = $_->[0]) }
	  sort { $b->[0] <=> $a->[0] } @$_;
    }

    #- remove unusable resolutions (based on the video memory size and the monitor hsync rate)
    keepOnlyLegalModes($card, $o->{monitor});

    my $res = $o->{resolution_wanted} || $card->{suggest_wres} || autoDefaultResolution($o->{monitor}{size});
    my $wres = first(split 'x', $res);

    #- take the first available resolution <= the wanted resolution
    eval { $wres = max map { first(grep { $_->[0] <= $wres } @$_)->[0] } values %{$card->{depth}} };
    my $depth = eval { $o->{default_depth} || autoDefaultDepth($card, $wres) };

    $auto or ($depth, $wres) = chooseResolutions($card, $depth, $wres) or return;

    #- if nothing has been found for wres,
    #- try to find if memory used by mode found match the memory available
    #- card, if this is the case for a relatively low resolution ( < 1024 ),
    #- there could be a problem.
    #- memory in KB is approximated by $wres*$dpeth/14 which is little less
    #- than memory really used, (correct factor is 13.65333 for w/h ratio of 1.33333).
    if (!$wres || $auto && ref($in) !~ /class_discard/ && ($wres < 1024 && ($card->{memory} / ($wres * $depth / 14)) > 2)) {
	delete $card->{depth};
	return resolutionsConfiguration($o);
    }

    #- needed in auto mode when all has been provided by the user
    $card->{depth}{$depth} or die "you selected an unusable depth";

    #- remove all biggest resolution (keep the small ones for ctl-alt-+)
    #- otherwise there'll be a virtual screen :(
    $_ = [ grep { $_->[0] <= $wres } @$_ ] foreach values %{$card->{depth}};
    $card->{default_wres} = $wres;
    $card->{vga_mode} = $vgamodes{"${wres}xx$depth"} || $vgamodes{"${res}x$depth"}; #- for use with frame buffer.
    $o->{default_depth} = $depth;
    1;
}


#- Create the XF86Config file.
sub write_XF86Config {
    my ($o, $file) = @_;
    my $O;

    $::g_auto_install and return;

    local (*F, *G);
    open F, ">$file"   or die "can't write XF86Config in $file: $!";
    open G, ">$file-4" or die "can't write XF86Config in $file-4: $!";

    print F $XF86firstchunk_text;
    print G $XF86firstchunk_text;

    #- Write keyboard section.
    $O = $o->{keyboard};
    print F $keyboardsection_start;
    print G $keyboardsection_start_v4;
    print F qq(    XkbDisable\n) unless $O->{xkb_keymap};
    print G qq(    Option "XkbDisable"\n) unless $O->{xkb_keymap};
    print F $keyboardsection_part3;
    print G $keyboardsection_part3_v4;

    $O->{xkb_model} ||= 
      arch() =~ /sparc/ ? 'sun' :
      $O->{xkb_keymap} eq 'jp' ? 'jp106' : 
      $O->{xkb_keymap} eq 'br' ? 'abnt2' : 'pc105';
    print F qq(    XkbModel        "$O->{xkb_model}"\n);
    print G qq(    Option "XkbModel" "$O->{xkb_model}"\n);

    print F qq(    XkbLayout       "$O->{xkb_keymap}"\n);
    print G qq(    Option "XkbLayout" "$O->{xkb_keymap}"\n);
    print F join '', map { "    $_\n" } @{$xkb_options{$O->{xkb_keymap}} || []};
    print G join '', map { /(\S+)(.*)/; qq(    Option "$1" $2\n) } @{$xkb_options{$O->{xkb_keymap}} || []};
    print F $keyboardsection_end;
    print G $keyboardsection_end;

    #- Write pointer section.
    my $pointer = sub {
	my ($O, $id) = @_;
	print F $id > 1 ? qq(Section "XInput"\n) : qq(Section "Pointer"\n);
	$id > 1 and print F qq(    SubSection "Mouse"\n);
	print G qq(Section "InputDevice"\n\n);
	$id > 1 and print F qq(        DeviceName "Mouse$id"\n);
	print G qq(    Identifier  "Mouse$id"\n);
	print G qq(    Driver      "mouse"\n);
	print F ($id > 1 && "    ") . qq(    Protocol    "$O->{XMOUSETYPE}"\n);
	print G qq(    Option "Protocol"    "$O->{XMOUSETYPE}"\n);
	print F ($id > 1 && "    ") . qq(    Device      "/dev/$O->{device}"\n);
	print G qq(    Option "Device"      "/dev/$O->{device}"\n);
	print F "        AlwaysCore\n" if $id > 1;
	#- this will enable the "wheel" or "knob" functionality if the mouse supports it
	print F ($id > 1 && "    ") . "    ZAxisMapping 4 5\n" if $O->{nbuttons} > 3;
	print F ($id > 1 && "    ") . "    ZAxisMapping 6 7\n" if $O->{nbuttons} > 5;
	print G qq(    Option "ZAxisMapping" "4 5"\n) if $O->{nbuttons} > 3;
	print G qq(    Option "ZAxisMapping" "6 7"\n) if $O->{nbuttons} > 5;

	print F "#" unless $O->{nbuttons} < 3;
	print G "#" unless $O->{nbuttons} < 3;
	print F ($id > 1 && "    ") . qq(    Emulate3Buttons\n);
	print G qq(    Option "Emulate3Buttons"\n);
	print F "#" unless $O->{nbuttons} < 3;
	print G "#" unless $O->{nbuttons} < 3;
	print F ($id > 1 && "    ") . qq(    Emulate3Timeout    50\n\n);
	print G qq(    Option "Emulate3Timeout"    "50"\n\n);
	print F "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
	print G "# ChordMiddle is an option for some 3-button Logitech mice\n\n";
	print F "#" unless $O->{chordmiddle};
	print G "#" unless $O->{chordmiddle};
	print F ($id > 1 && "    ") . qq(    ChordMiddle\n\n);
	print G qq(    Option "ChordMiddle"\n\n);
	print F ($id > 1 && "    ") . "    ClearDTR\n" if $O->{cleardtrrts};
	print F ($id > 1 && "    ") . "    ClearRTS\n\n"  if $O->{cleardtrrts};
	$id > 1 and print F qq(    EndSubSection\n);
	print F "EndSection\n\n\n";
	print G "EndSection\n\n\n";
    };
    print F $pointersection_text;
    print G $pointersection_text;
    $pointer->($o->{mouse}, 1);
    $o->{mouse}{auxmouse} and $pointer->($o->{mouse}{auxmouse}, 2);

    #- write module section for version 3.
    if (@{$o->{wacom}} || $o->{card}{Utah_glx}) {
	print F qq(Section "Module"
);
	print F qq(    Load "xf86Wacom.so"\n) if @{$o->{wacom}};
	print F qq(    Load "glx-3.so"\n) if $o->{card}{Utah_glx}; #- glx.so may clash with server version 4.
	print F qq(EndSection

);
    }

    #- write wacom device support.
    foreach (1 .. @{$o->{wacom}}) {
	my $dev = "/dev/" . $o->{wacom}[$_-1];
	print F $dev =~ /input\/event/ ? qq(
Section "XInput"
    SubSection "WacomStylus"
        Port "$dev"
        DeviceName "Stylus$_"
        USB
        AlwaysCore
        Mode Absolute
    EndSubSection
    SubSection "WacomCursor"
        Port "$dev"
        DeviceName "Cursor$_"
        USB
        AlwaysCore
        Mode Relative
    EndSubSection
    SubSection "WacomEraser"
        Port "$dev"
        DeviceName "Eraser$_"
        USB
        AlwaysCore
        Mode Absolute
    EndSubSection
EndSection

) : qq(
Section "XInput"
    SubSection "WacomStylus"
        Port "$dev"
        DeviceName "Stylus$_"
        AlwaysCore
        Mode Absolute
    EndSubSection
    SubSection "WacomCursor"
        Port "$dev"
        DeviceName "Sursor$_"
        AlwaysCore
        Mode Relative
    EndSubSection
    SubSection "WacomEraser"
        Port "$dev"
        DeviceName "Eraser$_"
        AlwaysCore
        Mode Absolute
    EndSubSection
EndSection

);
    }

    foreach (1..@{$o->{wacom}}) {
	my $dev = "/dev/" . $o->{wacom}[$_-1];
	print G $dev =~ /input\/event/ ? qq(
Section "InputDevice"
    Identifier	"Stylus$_"
    Driver	"wacom"
    Option	"Type" "stylus"
    Option	"Device" "$dev"
    Option	"Mode" "Absolute"
    Option	"USB" "on"
EndSection
Section "InputDevice"
    Identifier	"Eraser$_"
    Driver	"wacom"
    Option	"Type" "eraser"
    Option	"Device" "$dev"
    Option	"Mode" "Absolute"
    Option	"USB" "on"
EndSection
Section "InputDevice"
    Identifier	"Cursor$_"
    Driver	"wacom"
    Option	"Type" "cursor"
    Option	"Device" "$dev"
    Option	"Mode" "Relative"
    Option	"USB" "on"
EndSection
) : qq(
Section "InputDevice"
    Identifier	"Stylus$_"
    Driver	"wacom"
    Option	"Type" "stylus"
    Option	"Device" "$dev"
    Option	"Mode" "Absolute"
EndSection
Section "InputDevice"
    Identifier	"Eraser$_"
    Driver	"wacom"
    Option	"Type" "eraser"
    Option	"Device" "$dev"
    Option	"Mode" "Absolute"
EndSection
Section "InputDevice"
    Identifier	"Cursor$_"
    Driver	"wacom"
    Option	"Type" "cursor"
    Option	"Device" "$dev"
    Option	"Mode" "Relative"
EndSection
);
    }

    #- write modules section for version 4.
    print G qq(
Section "Module"

# This loads the DBE extension module.
    Load	"dbe"
);
    unless ($o->{card}{DRI_glx} && $o->{card}{driver} eq 'r128') {
	print G qq(
# This loads the Video for Linux module.
    Load        "v4l"
);
    }
    if ($o->{card}{DRI_glx}) {
	print G qq(
    Load	"glx"
    Load	"dri"
);
    } elsif ($o->{card}{NVIDIA_glx}) {
	print G qq(
# This loads the NVIDIA GLX extension module.
# IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
# IT WILL LOAD XFree86 glx module and the server will crash.

    Load        "/usr/X11R6/lib/modules/extensions/libglx.so"
);
    }
    print G qq(

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection	"extmod"
	#Option	"omit xfree86-dga"
    EndSubSection

# This loads the Type1 and FreeType font modules

    Load	"type1"
    Load	"freetype"
EndSection
);
    print G qq(

Section "DRI"
    Mode	0666
EndSection

) if $o->{card}{DRI_glx};

    #- Write monitor section.
    $O = $o->{monitor};
    print F $monitorsection_text1;
    print G $monitorsection_text1;
    print F qq(    Identifier "$O->{type}"\n);
    print G qq(    Identifier "$O->{type}"\n);
    print G qq(    UseModes   "Mac Modes"\n) if arch() =~ /ppc/;
    print F qq(    VendorName "$O->{vendor}"\n);
    print G qq(    VendorName "$O->{vendor}"\n);
    print F qq(    ModelName  "$O->{model}"\n\n);
    print G qq(    ModelName  "$O->{model}"\n\n);
    print F $monitorsection_text2;
    print G $monitorsection_text2;
    print F qq(    HorizSync  $O->{hsyncrange}\n\n);
    print G qq(    HorizSync  $O->{hsyncrange}\n\n);
    print F $monitorsection_text3;
    print G $monitorsection_text3;
    print F qq(    VertRefresh $O->{vsyncrange}\n\n);
    print G qq(    VertRefresh $O->{vsyncrange}\n\n);
    print F $monitorsection_text4;
    print F ($O->{modelines} || '') . ($o->{card}{type} eq "TG 96" ?
				       $modelines_text_Trident_TG_96xx : "$modelines_text$modelines_text_ext");
    print G $modelines_text_ext;
    print F "\nEndSection\n\n\n";
    print G "\nEndSection\n\n\n";
    print G $modelines_text_apple if arch() =~ /ppc/;
    foreach (2..@{$o->{card}{cards} || []}) {
	print G qq(Section "Monitor"\n);
	print G qq(    Identifier "monitor$_"\n);
	print G qq(    VendorName "$O->{vendor}"\n);
	print G qq(    ModelName  "$O->{model}"\n\n);
	print G qq(    HorizSync   $O->{hsyncrange}\n);
	print G qq(    VertRefresh $O->{vsyncrange}\n);
	print G qq(EndSection\n\n\n);
    }

    #- Write Device section.
    $O = $o->{card};
    print F $devicesection_text;
    print G $devicesection_text_v4;
    print F qq(Section "Device"\n);
    print F qq(    Identifier  "$O->{type}"\n);
    print F qq(    VendorName  "$O->{vendor}"\n);
    print F qq(    BoardName   "$O->{board}"\n);

    print F "#" if $O->{chipset} && !$O->{flags}{needChipset};
    print F qq(    Chipset     "$O->{chipset}"\n) if $O->{chipset};

    print F "#" if $O->{memory} && !$O->{flags}{needVideoRam};
    print F "    VideoRam    $O->{memory}\n" if $O->{memory};

    print F map { "    $_\n" } @{$O->{lines} || []};

    print F qq(    Ramdac      "$O->{ramdac}"\n) if $O->{ramdac};
    print F qq(    Dacspeed    "$O->{dacspeed}"\n) if $O->{dacspeed};

    if ($O->{clockchip}) {
	print F qq(    Clockchip   "$O->{clockchip}"\n);
    } else {
	print F "    # Clock lines\n";
	print F "    Clocks $_\n" foreach (@{$O->{clocklines}});
    }
    print F qq(

    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

);
    my $p_xf3 = sub {
	my $l = $O->{$_[0]};
	map { (!$l->{$_} && '#') . qq(    Option      "$_"\n) } keys %{$l || {}};
    };
    my $p_xf4 = sub {
	my $l = $O->{$_[0]};
	map { (! defined $l->{$_} && '#') . qq(    Option      "$_"  "$l->{$_}"\n) } keys %{$l || {}};
    };
    print F $p_xf3->('options');
    print F $p_xf3->('options_xf3');
    print F "EndSection\n\n\n";

    #- configure all drivers here!
    foreach (@{$O->{cards} || [ $O ]}) {
	print G qq(Section "Device"\n);
	print G qq(    Identifier  "$_->{type}"\n);
	print G qq(    VendorName  "$_->{vendor}"\n);
	print G qq(    BoardName   "$_->{board}"\n);
	print G qq(    Driver      "$_->{driver}"\n);
	print G "#" if $_->{memory} && !$_->{flags}{needVideoRam};
	print G "    VideoRam    $_->{memory}\n" if $_->{memory};
	print G map { "    $_\n" } @{$_->{lines} || []};
	print G qq(    Ramdac      "$_->{ramdac}"\n) if $_->{ramdac};
	print G qq(    Dacspeed    "$_->{dacspeed}"\n) if $_->{dacspeed};
	if ($_->{clockchip}) {
	    print G qq(    Clockchip   "$_->{clockchip}"\n);
	} else {
	    print G "    # Clock lines\n";
	    print G "    Clocks $_\n" foreach (@{$_->{clocklines}});
	}
	print G qq(

    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

);
	print G $p_xf3->('options'); #- keep $O for these!
	print G $p_xf4->('options_xf4'); #- keep $O for these!
	print G qq(    Screen $_->{screen}\n) if defined $_->{screen};
	print G qq(    BusID       "$_->{busid}"\n) if $_->{busid};
        if ((arch =~ /ppc/) && ($_->{driver} eq "r128")) {
            print G qq(    Option    "UseFBDev"\n);
        }
	print G "EndSection\n\n\n";
    }

    #- Write Screen sections.
    print F $screensection_text1, "\n";
    print G $screensection_text1, "\n";

    my $subscreen = sub {
	my ($f, $server, $defdepth, $depths) = @_;
	print $f "    DefaultColorDepth $defdepth\n" if $defdepth;

        foreach (ikeys(%$depths)) {
	    my $m = $server ne "fbdev" ? join(" ", map { qq("$_->[0]x$_->[1]") } @{$depths->{$_}}) : qq("default"); #-"
	    print $f qq(    Subsection "Display"\n);
	    print $f qq(        Depth       $_\n) if $_;
	    print $f qq(        Modes       $m\n);
	    print $f qq(        ViewPort    0 0\n);
	    print $f qq(    EndSubsection\n);
	}
	print $f "EndSection\n";
    };

    my $screen = sub {
	my ($server, $defdepth, $device, $depths) = @_;
	print F qq(
Section "Screen"
    Driver "$server"
    Device      "$device"
    Monitor     "$o->{monitor}{type}"
); #-"
	$subscreen->(*F, $server, $defdepth, $depths);
    };

    #- SVGA screen section.
    print F qq(
# The Colour SVGA server
);

    if (member($O->{server}, @svgaservers)) {
	&$screen("svga", $o->{default_depth}, $O->{type}, $O->{depth});
    } else {
	&$screen("svga", '', "Generic VGA", { 8 => [[ 320, 200 ]] });
    }

    &$screen("vga16", '',
	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"),
	     { '' => [[ 640, 480 ], [ 800, 600 ]]});

    &$screen("vga2", '',
	     (member($O->{server}, "Mono", "VGA16") ? $O->{type} : "Generic VGA"),
	     { '' => [[ 640, 480 ], [ 800, 600 ]]});

    &$screen("accel", $o->{default_depth}, $O->{type}, $O->{depth});

    &$screen("fbdev", $o->{default_depth}, $O->{type}, $O->{depth});

    print G qq(
Section "Screen"
    Identifier "screen1"
    Device      "$O->{type}"
    Monitor     "$o->{monitor}{type}"
);
    #- hack for DRI with Matrox card at 24 bpp, need another command.
    $O->{DRI_glx} && $O->{identifier} =~ /Matrox.* G[245][05]0/ && $o->{default_depth} == 24 and
      print G "    DefaultFbBpp      32\n";
    #- bpp 32 not handled by XF4
    $subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth});
    foreach (2..@{$O->{cards} || []}) {
	my $device = $O->{cards}[$_ - 1]{type};
	print G qq(
Section "Screen"
    Identifier "screen$_"
    Device      "$device"
    Monitor     "monitor$_"
);
	#- hack for DRI with Matrox card at 24 bpp, need another command.
	$O->{DRI_glx} && $O->{identifier} =~ /Matrox.* G[245][05]0/ && $o->{default_depth} == 24 and
	  print G "    DefaultFbBpp      32\n";
	#- bpp 32 not handled by XF4
	$subscreen->(*G, "svga", min($o->{default_depth}, 24), $O->{depth});
    }

    print G qq(

Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"
);
    foreach (2..@{$O->{cards} || []}) {
	my ($curr, $prev) = ($_, $_ - 1);
	print G qq(    Screen     "screen$curr" RightOf "screen$prev"\n);
    }
    print G '#' if defined $O->{Xinerama} && !$O->{Xinerama};
    print G qq(    Option     "Xinerama" "on"\n) if defined $O->{Xinerama};

    print G '
    InputDevice "Mouse1" "CorePointer"
';
    $o->{mouse}{auxmouse} and print G '
    InputDevice "Mouse2" "SendCoreEvents"
';
    foreach (1..@{$o->{wacom}}) {
	print G qq(
    InputDevice "Stylus$_" "AlwaysCore"
    InputDevice "Eraser$_" "AlwaysCore"
    InputDevice "Cursor$_" "AlwaysCore"
);
    }
    print G '
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
'; #-"

    close F;
    close G;
}

sub XF86check_link {
    my ($ext) = @_;

    my $f = "$prefix/etc/X11/XF86Config$ext";
    touch($f);

    my $l = "$prefix/usr/X11R6/lib/X11/XF86Config$ext";

    if (-e $l && (stat($f))[1] != (stat($l))[1]) { #- compare the inode, must be the sames
	-e $l and unlink($l) || die "can't remove bad $l";
	symlinkf "../../../../etc/X11/XF86Config$ext", $l;
    }
}

sub info {
    my ($o) = @_;
    my $info;
    my $xf_ver = $o->{card}{use_xf4} ? "4.2.0" : "3.3.6";
    my $title = ($o->{card}{DRI_glx} || $o->{card}{NVIDIA_glx} || $o->{Utah_glx} ?
		 _("XFree %s with 3D hardware acceleration", $xf_ver) : _("XFree %s", $xf_ver));

    $info .= _("Keyboard layout: %s\n", $o->{keyboard}{xkb_keymap});
    $info .= _("Mouse type: %s\n", $o->{mouse}{XMOUSETYPE});
    $info .= _("Mouse device: %s\n", $o->{mouse}{device}) if $::expert;
    $info .= _("Monitor: %s\n", $o->{monitor}{type});
    $info .= _("Monitor HorizSync: %s\n", $o->{monitor}{hsyncrange}) if $::expert;
    $info .= _("Monitor VertRefresh: %s\n", $o->{monitor}{vsyncrange}) if $::expert;
    $info .= _("Graphics card: %s\n", $o->{card}{type});
    $info .= _("Graphics card identification: %s\n", $o->{card}{identifier}) if $::expert;
    $info .= _("Graphics memory: %s kB\n", $o->{card}{memory}) if $o->{card}{memory};
    if ($o->{default_depth} and my $depth = $o->{card}{depth}{$o->{default_depth}}) {
	$info .= _("Color depth: %s\n", translate($depths{$o->{default_depth}}));
	$info .= _("Resolution: %s\n", join "x", @{$depth->[0]}) if $depth && !is_empty_array_ref($depth->[0]);
    }
    $info .= _("XFree86 server: %s\n", $o->{card}{server}) if $o->{card}{server};
    $info .= _("XFree86 driver: %s\n", $o->{card}{driver}) if $o->{card}{driver};
    "$title\n\n$info";
}

sub show_info {
    my ($o) = @_;
    $in->ask_warn('', info($o));
}

#- Program entry point.
sub main {
    ($prefix, my $o, $in, $do_pkgs, my $cardOptions) = @_;
    $o ||= {};

    XF86check_link('');
    XF86check_link('-4');

    {
	my $w = $in->wait_message('', _("Preparing X-Window configuration"), 1);

	$o->{card} = cardConfiguration($o->{card}, $::noauto, $cardOptions);

	$o->{monitor} = monitorConfiguration($o->{monitor}, $o->{card}{server} eq 'FBDev');
    }
    my $ok = resolutionsConfiguration($o, $::auto);

    $ok &&= testFinalConfig($o, $::auto, $o->{skiptest}, $::auto);

    my $quit;
    until ($ok || $quit) {
	ref($in) =~ /discard/ and die "automatic X configuration failed, ensure you give hsyncrange and vsyncrange with non-DDC aware videocards/monitors";

	$in->set_help('configureXmain') unless $::isStandalone;

	my $f;
	$in->ask_from_(
		{ 
		 title => 'XFdrake',
		 messages => _("What do you want to do?"),
		 cancel => '',
		}, [
		    { format => sub { $_[0][0] }, val => \$f,
		      list => [
	   [ _("Change Monitor") => sub { $o->{monitor} = monitorConfiguration() } ],
           [ _("Change Graphics card") => sub { my $card = cardConfiguration('', 'noauto', $cardOptions);
					       $card and $o->{card} = $card } ],
                    if_($::expert, 
           [ _("Change Server options") => sub { optionsConfiguration($o) } ]),
	   [ _("Change Resolution") => sub { resolutionsConfiguration($o) } ],
	   [ _("Show information") => sub { show_info($o) } ],
	   [ _("Test again") => sub { $ok = testFinalConfig($o, 1) } ],
	   [ _("Quit") => sub { $quit = 1 } ],
			       ],
		    }
		   ]);
	$f->[1]->();
	$in->kill;
    }
    if (!$ok) {
	$ok = $in->ask_yesorno('', _("Keep the changes?
The current configuration is:

%s", info($o)));
    }
    if ($ok) {
	unless ($::testing) {
	    my $f = "$prefix/etc/X11/XF86Config";
	    if (-e "$f.test") {
		rename $f, "$f.old" or die "unable to make a backup of XF86Config";
		rename "$f-4", "$f-4.old";
		rename "$f.test", $f;
		rename "$f.test-4", "$f-4";
		if ($o->{card}{server} !~ /Xpmac/) {
		    symlinkf "../..$o->{card}{prog}", "$prefix/etc/X11/X";
		}
	    }
	}

	if (!$::isStandalone || $0 !~ /Xdrakres/) {
	    $in->set_help('configureXxdm') unless $::isStandalone;
	    my $run = exists $o->{xdm} ? $o->{xdm} : $::auto || $in->ask_yesorno(_("Graphical interface at startup"),
_("I can setup your computer to automatically start the graphical interface (XFree) upon booting.
Would you like XFree to start when you reboot?"), 1);
	    any::runlevel($prefix, $run ? 5 : 3) unless $::testing;
	}
	if ($::isStandalone && $in->isa('interactive_gtk')) {
	    if (my $wm = any::running_window_manager()) {
		if ($in->ask_okcancel('', _("Please relog into %s to activate the changes", ucfirst (lc $wm)), 1)) {
		    fork and $in->exit;
		    any::ask_window_manager_to_logout($wm);

		    open STDIN, "</dev/zero";
		    open STDOUT, ">/dev/null";
		    open STDERR, ">&STDERR";
		    c::setsid();
		    exec qw(perl -e), q{
                        my $wm = shift;
  		        for (my $nb = 30; $nb && `pidof "$wm"` > 0; $nb--) { sleep 1 }
  		        system("killall X ; killall -15 xdm gdm kdm prefdm") unless `pidof "$wm"` > 0;
  		    }, $wm;
		}
	    } else {
		$in->ask_warn('', _("Please log out and then use Ctrl-Alt-BackSpace"));
	    }
	} 
    }
}

1;