summaryrefslogtreecommitdiffstats
path: root/perl-install/install_steps_stdio.pm
Commit message (Expand)AuthorAgeFilesLines
* - move call to ->charsetChanged from install_steps_interactive to install_stepsPascal Rigaux2003-09-031-9/+5
* perl_checker compliance ("ref" now need parentheses in many case)Pascal Rigaux2003-02-121-1/+1
* language/country selection change:Guillaume Cottenceau2003-02-081-1/+1
* replace "_" with "N" and "__" with "N_"Pascal Rigaux2002-11-061-1/+1
* - Big Move 1: interactive::* hierarchyThierry Vignaud2002-07-231-2/+2
* stdio mode works againGuillaume Cottenceau2001-10-111-1/+0
* move to MDK::Common, bool->to_boolPascal Rigaux2001-07-241-1/+1
* no_commentPascal Rigaux2000-09-141-1/+1
* no_commentPascal Rigaux2000-09-131-4/+1
* no_commentPascal Rigaux2000-08-281-0/+9
* no_commentPascal Rigaux1999-11-121-48/+8
* no_commentPascal Rigaux1999-10-251-2/+4
* no_commentPascal Rigaux1999-10-041-1/+1
* no_commentPascal Rigaux1999-09-191-9/+9
* no_commentPascal Rigaux1999-08-231-3/+3
* *** empty log message ***Pascal Rigaux1999-08-091-1/+1
* no_commentPascal Rigaux1999-07-291-137/+11
* no_commentPascal Rigaux1999-07-241-7/+15
* no_commentPascal Rigaux1999-07-231-4/+2
* *** empty log message ***Pascal Rigaux1999-07-171-5/+6
* *** empty log message ***Pascal Rigaux1999-07-161-17/+13
* *** empty log message ***Pascal Rigaux1999-07-151-0/+196
generated by cgit v1.2.1 (git 2.21.0) at 2024-10-14 22:14:31 +0000
f='#n262'>262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 
package install::install2;

use diagnostics;
use strict;
use vars qw($o);
use Getopt::Long qw(GetOptionsFromArray :config no_ignore_case no_auto_abbrev no_getopt_compat);

BEGIN { $::isInstall = 1 }

=head1 SYNOPSYS

The installer stage2 real entry point

=cut

#-######################################################################################
#- misc imports
#-######################################################################################
use install::steps_list;
use common;
use install::any 'addToBeDone';
use install::steps;
use install::any;
use lang;
use keyboard;
use mouse;
use devices;
use partition_table;
use modules;
use detect_devices;
use run_program;
use any;
use log;
use fs;
use fs::any;
use fs::mount;
use messages;

#-#######################################################################################
=head1 Data Structure

=head2 $O;

$o (or $::o in other modules) is the big struct which contain, well everything:

=over 4

=item * globals

=item * the interactive methods

=item * ...

=back

if you want to do a kickstart file, you just have to add all the required fields (see for example
the variable $default)

=cut
#-#######################################################################################
$o = $::o = {
#    bootloader => { linear => 0, message => 1, timeout => 5, restricted => 0 },
#-    packages   => [ qw() ],
    partitioning => { clearall => 0, eraseBadPartitions => 0, auto_allocate => 0 }, #-, readonly => 0 },
    authentication => { blowfish => 1, shadow => 1 },
    locale         => { lang => 'en_US' },
#-    isUpgrade    => 0,
    toRemove     => [],
    toSave       => [],
#-    simple_themes => 1,

    timezone => {
#-                   timezone => "Europe/Paris",
#-                   UTC      => 1,
                },
#-    superuser => { password => 'a', shell => '/bin/bash', realname => 'God' },
#-    user => { name => 'foo', password => 'bar', home => '/home/foo', shell => '/bin/bash', realname => 'really, it is foo' },

#-    keyboard => 'de',
#-    display => "192.168.1.19:1",
    steps        => \%install::steps_list::installSteps,
    orderedSteps => \@install::steps_list::orderedInstallSteps,

    #- for the list of fields available, see network/network.pm
    net => {
	    #- network => { HOSTNAME => 'abcd' },
	    #- resolv => { DOMAINNAME => 'foo.xyz' },
	    #- ifcfg => {
	    #-   eth0 => { DEVICE => "eth0", IPADDR => '1.2.3.4', NETMASK => '255.255.255.128' }
	    #- },
	    },
    untranslated_license => messages::main_license_raw(),
#-step : the current one
#-prefix
#-mouse
#-keyboard
#-netc
#-methods
#-packages compss

};

=head1 Steps Navigation

=over

=cut

sub installStepsCall {
    my ($o, $auto, $fun, @args) = @_;
    $fun = "install::steps::$fun" if $auto;
    $o->$fun(@args);
}

=item getNextStep($o)

Returns next step

=cut

sub getNextStep {
    my ($o) = @_;
    find { !$o->{steps}{$_}{done} && $o->{steps}{$_}{reachable} } @{$o->{orderedSteps}};
}

#-######################################################################################

=back

=head1 Steps Functions

Each step function are called with two arguments : clicked(because if you are a
beginner you can force the the step) and the entered number

=cut

#-######################################################################################

#------------------------------------------------------------------------------
sub selectLanguage {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'selectLanguage');
}

sub acceptLicense {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'acceptLicense');
}

#------------------------------------------------------------------------------
sub selectMouse {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'selectMouse');

    addToBeDone { mouse::write($o->do_pkgs, $o->{mouse}) if !$o->{isUpgrade} } 'installPackages';
}

#------------------------------------------------------------------------------
sub setupSCSI {
    my ($auto) = @_;

    installStepsCall($o, $auto, 'setupSCSI');
}

#------------------------------------------------------------------------------
sub selectKeyboard {
    my ($auto) = @_;

    my $force;
    if (my $keyboard = keyboard::read()) {
	$o->{keyboard} = $keyboard; #- for uprade
    } elsif ($o->{isUpgrade}) {
	#- oops, the keyboard config is wrong, forcing prompt and writing
	$force = 1;
    }

    installStepsCall($o, $auto, 'selectKeyboard', $force);
}

#------------------------------------------------------------------------------
sub selectInstallClass {
    my ($auto) = @_;

    installStepsCall($o, $auto, 'selectInstallClass');

    if ($o->{isUpgrade}) {
	@{$o->{orderedSteps}} = uniq(map {
	    $_ eq 'selectInstallClass' ? ($_, 'doPartitionDisks', 'formatPartitions') : $_;
	} @{$o->{orderedSteps}});
    }
}

#------------------------------------------------------------------------------
sub doPartitionDisks {
    my ($auto) = @_;
    $o->{steps}{formatPartitions}{done} = 0;
    installStepsCall($o, $auto, 'doPartitionDisksBefore');
    installStepsCall($o, $auto, 'doPartitionDisks');
    installStepsCall($o, $auto, 'doPartitionDisksAfter');
}

sub formatPartitions {
    my ($auto) = @_;

    $o->{steps}{choosePackages}{done} = 0;
    installStepsCall($o, $auto, 'choosePartitionsToFormat') if !$o->{isUpgrade} && !$::local_install;
    my $want_root_formated = fs::get::root($o->{fstab})->{toFormat};
    if ($want_root_formated) {
	foreach ('/usr') {
	    my $part = fs::get::mntpoint2part($_, $o->{fstab}) or next;
	    $part->{toFormat} or die N("You must also format %s", $_);
	}
    }
    installStepsCall($o, $auto, 'formatMountPartitions') if !$::testing;

    if ($want_root_formated) {
	#- we formatted /, ensure /var/lib/rpm is cleaned otherwise bad things can happen
	#- (especially when /var is *not* formatted)
	eval { rm_rf("$::prefix/var/lib/rpm") };
    }

    fs::any::prepare_minimal_root();

    install::any::screenshot_dir__and_move();
    install::any::move_compressed_image_to_disk($o);

    any::rotate_logs($::prefix);

    require raid;
    raid::write_conf($o->{all_hds}{raids});
}

#------------------------------------------------------------------------------
sub choosePackages {
    my ($auto) = @_;
    require install::pkgs;

    #- always setPackages as it may have to copy hdlist and synthesis files.
    installStepsCall($o, $auto, 'setPackages');
    installStepsCall($o, $auto, 'choosePackages');
    my @flags = map_each { if_($::b, $::a) } %{$o->{rpmsrate_flags_chosen}};
    log::l("rpmsrate_flags_chosen's: ", join(' ', sort @flags));

    #- check pre-condition that basesystem package must be selected.
    my $base_pkg = install::pkgs::packageByName($o->{packages}, 'basesystem');
    $base_pkg->flag_available or $base_pkg->flag_installed or die "basesystem package not selected";

    #- check if there are packages that need installation.
    $o->{steps}{installPackages}{done} = 0 if $o->{steps}{installPackages}{done} && install::pkgs::packagesToInstall($o->{packages}) > 0;
}

#------------------------------------------------------------------------------
sub installPackages {
    my ($auto) = @_;

    installStepsCall($o, $auto, 'beforeInstallPackages');
    installStepsCall($o, $auto, 'installPackages');
    installStepsCall($o, $auto, 'afterInstallPackages');
}
#------------------------------------------------------------------------------
sub miscellaneous {
    my ($auto) = @_;

    installStepsCall($o, $auto, 'miscellaneousBefore');
    installStepsCall($o, $auto, 'miscellaneous');
    installStepsCall($o, $auto, 'miscellaneousAfter');
}

#------------------------------------------------------------------------------
sub summary {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'summaryBefore') if $o->{steps}{summary}{entered} == 1;
    installStepsCall($o, $auto, 'summary');
    installStepsCall($o, $auto, 'summaryAfter');
}
#------------------------------------------------------------------------------
sub configureNetwork {
    my ($auto) = @_;
    #- get current configuration of network device.
    require network::network;
    eval { network::network::read_net_conf($o->{net}) };
    modules::load_category($o->{modules_conf}, list_modules::ethernet_categories());
    require network::connection::ethernet;
    if (!$o->{isUpgrade}) {
        installStepsCall($o, $auto, 'configureNetwork');
    } else {
        network::connection::ethernet::configure_eth_aliases($o->{modules_conf});
    }
}
#------------------------------------------------------------------------------
sub installUpdates {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'installUpdates');
}
#------------------------------------------------------------------------------
sub configureServices {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'configureServices');
}
#------------------------------------------------------------------------------
sub setRootPassword_addUser {
    my ($auto) = @_;

    installStepsCall($o, $auto, 'setRootPassword_addUser') if !$o->{isUpgrade};
}

#------------------------------------------------------------------------------
sub setupBootloader {
    my ($auto) = @_;
    return if $::local_install;

    $o->{modules_conf}->write;

    installStepsCall($o, $auto, 'setupBootloaderBefore');
    installStepsCall($o, $auto, 'setupBootloader');
}
#------------------------------------------------------------------------------
sub configureX {
    my ($auto) = @_;

    #- done here and also at the end of install2.pm, just in case...
    install::any::write_fstab($o);
    $o->{modules_conf}->write;

    require install::pkgs;
    installStepsCall($o, $auto, 'configureX') if !$::testing && eval { install::pkgs::packageByName($o->{packages}, 'task-x11')->flag_installed } && !$o->{X}{disabled};
}
#------------------------------------------------------------------------------
sub exitInstall {
    my ($auto) = @_;
    installStepsCall($o, $auto, 'exitInstall', getNextStep($::o) eq 'exitInstall');
}

#-######################################################################################

=head1 Udev Functions

=over

=cut

#-######################################################################################

=item start_udev()

=cut

sub start_udev() {
    return if fuzzy_pidofs('udevd');

    # Start up udev:
    mkdir_p("/run/udev/rules.d");
    $ENV{UDEVRULESD} = "/run/udev/rules.d";
    run_program::run("/usr/lib/systemd/systemd-udevd", "--daemon", "--resolve-names=never");
    # Coldplug all devices:
    run_program::run("udevadm", "trigger", "--type=subsystems", "--action=add");
    run_program::run("udevadm", "trigger", "--type=devices", "--action=add");
}

=item stop_udev()

=cut

sub stop_udev() {
    kill 15, fuzzy_pidofs('udevd');
    sleep(2);
    fs::mount::umount($_) foreach '/dev/pts', '/dev/shm';
}

#-######################################################################################

=back

=head1 Other Functions

=over

=cut

#-######################################################################################

sub init_local_install {
    my ($o) = @_;
    push @::auto_steps, 
#      'selectLanguage', 'selectKeyboard', 'miscellaneous', 'selectInstallClass',
      'doPartitionDisks', 'formatPartitions';
	fs::mount::sys_kernel_debug('');  #- do it now so that when_load doesn't do it
	$o->{nomouseprobe} = 1;
	$o->{mouse} = mouse::fullname2mouse('Universal|Any PS/2 & USB mice');
}

sub pre_init_brltty() {
    if (my ($s) = cat_("/proc/cmdline") =~ /brltty=(\S*)/) {
	my ($driver, $device, $table) = split(',', $s);
	$table = "text.$table.tbl" if $table !~ /\.tbl$/;
	log::l("brltty option $driver $device $table");
	$o->{brltty} = { driver => $driver, device => $device, table => $table };
	$o->{interactive} = 'curses';
	$o->{nomouseprobe} = 1;
    }
}

sub init_brltty() {
    symlink "/tmp/stage2/$_", $_ foreach "/etc/brltty";
    devices::make($_) foreach $o->{brltty}{device};
    run_program::run("brltty");
}

sub init_auto_install() {
    if ($::auto_install =~ /-IP(\.pl)?$/) {
        my ($ip) = cat_('/tmp/stage1.log') =~ /configuring device (?!lo)\S+ ip: (\S+)/;
        my $normalized_ip = join('', map { sprintf "%02X", $_ } split('\.', $ip)); 
        $::auto_install =~ s/-IP(\.pl)?$/-$normalized_ip$1/;
    }
    require install::steps_auto_install;
    eval { $o = $::o = install::any::loadO($o, $::auto_install) };
    if ($@) {
        if ($o->{useless_thing_accepted}) { #- Pixel's hack to be able to fail through
            log::l("error using auto_install, continuing");
            undef $::auto_install;
        } else {
            install::steps_auto_install_non_interactive::errorInStep($o, "Error using auto_install\n" . formatError($@));
        }
    } else {
        log::l("auto install config file loaded successfully");

        #- normalize for people not using our special scheme
        foreach (@{$o->{manualFstab} || []}) {
            $_->{device} =~ s!^/dev/!!;
        }
    }
}

sub step_init {
  my ($o) = @_;
  my $o_;
  while (1) {
      $o_ = $::auto_install ?
    	  install::steps_auto_install->new($o) :
    	    $o->{interactive} eq "stdio" ?
    	  install::steps_stdio->new($o) :
    	    $o->{interactive} eq "curses" ?
    	  install::steps_curses->new($o) :
    	    $o->{interactive} eq "gtk" ?
    	  install::steps_gtk->new($o) :
    	    die "unknown install type";
      $o_ and last;

      log::l("$o->{interactive} failed, trying again with curses");
      $o->{interactive} = "curses";
      require install::steps_curses;
  }
  $o;
}

sub read_product_id() {
    my $product_id = cat__(install::any::getFile_($o->{stage2_phys_medium}, "product.id"));
    log::l('product_id: ' . chomp_($product_id));
    $o->{product_id} = common::parse_LDAP_namespace_structure($product_id);
 
    $o->{meta_class} ||= {
        One          => 'desktop',
        Free         => 'download',
        Powerpack    => 'powerpack',
    }->{$o->{product_id}{product}} || 'download';
}

sub sig_segv_handler() {
    my $msg = "segmentation fault: install crashed (maybe memory is missing?)\n" . backtrace();
    log::l("$msg\n");
    # perl_checker: require UNIVERSAL
    UNIVERSAL::can($o, 'ask_warn') and $o->ask_warn('', $msg);
    setVirtual(1);
    require install::steps_auto_install;
    install::steps_auto_install_non_interactive::errorInStep($o, $msg);
}

=item read_stage1_net_conf() {

Reads back netork configuration done by stage1 (see L<stages>).

=cut

sub read_stage1_net_conf() {
    require network::network;
    #- get stage1 network configuration if any.
    log::l('found /tmp/network');
    add2hash($o->{net}{network} ||= {}, network::network::read_conf('/tmp/network'));
    if (my ($file) = grep { -f $_ } glob_('/tmp/ifcfg-*')) {
        log::l("found network config file $file");
        my $l = network::network::read_interface_conf($file);
        $o->{net}{ifcfg}{$l->{DEVICE}} ||= $l;
    }
    my $dsl_device = find { $_->{BOOTPROTO} eq 'adsl_pppoe' } values %{$o->{net}{ifcfg}};
    if ($dsl_device) {
        $o->{net}{type} = 'adsl';
        $o->{net}{net_interface} = $dsl_device->{DEVICE};
        $o->{net}{adsl} = {
            method => 'pppoe',
            device => $dsl_device->{DEVICE},
            ethernet_device => $dsl_device->{DEVICE},
            login => $dsl_device->{USER},
            password => $dsl_device->{PASS},
        };
        %$dsl_device = ();
    } else {
        $o->{net}{type} = 'lan';
        $o->{net}{net_interface} = first(values %{$o->{net}{ifcfg}});
    }
}

=item parse_args($cfg, $patch)

Parse arguments (which came from either the boot loader command line or its configuration file).

=cut

sub parse_args {
    my ($cfg, $patch);
    my @cmdline = (@_, map { "--$_" } split ' ', cat_("/proc/cmdline"));

    #- from stage1
    put_in_hash(\%ENV, { getVarsFromSh('/tmp/env') });
    exists $ENV{$_} and push @cmdline, sprintf("--%s=%s", lc($_), $ENV{$_}) foreach qw(METHOD PCMCIA KICKSTART);

    GetOptionsFromArray(\@cmdline,
	    'keyboard=s'   => sub { $o->{keyboard} = $_[1]; push @::auto_steps, 'selectKeyboard' },
	    'lang=s'       => \$o->{lang},
	    'flang=s'      => sub { $o->{lang} = $_[1]; push @::auto_steps, 'selectLanguage' },
	    'langs=s'      => sub { $o->{locale}{langs} = +{ map { $_ => 1 } split(':', $_[1]) } },
	    'method=s'     => \$o->{method},
	    'pcmcia=s'     => \$o->{pcmcia},
	    'step=s'       => \$o->{steps}{first},
	    'meta_class=s' => \$o->{meta_class},
	    'freedriver=s' => \$o->{freedriver},

	    # fs/block options:
	    no_bad_drives  => \$o->{partitioning}{no_bad_drives},
	    nodmraid       => \$o->{partitioning}{nodmraid},
	    'readonly=s'   => sub { $o->{partitioning}{readonly} = $_[1] ne "0" },
	    'use_uuid=s'   => sub { $::no_uuid_by_default = !$_[1] },

	    # urpmi options:
	    debug_urpmi    => \$o->{debug_urpmi},
	    deploops       => \$o->{deploops},
	    justdb         => \$o->{justdb},
	    'tune-rpm'     => sub { $o->{'tune-rpm'} = 'all' },

	    # GUI options:
	    'vga16=s'      => \$o->{vga16},
	    'vga=s'        => sub { $o->{vga} = $_[1] =~ /0x/ ? hex($_[1]) : $_[1] },
	    'display=s'    => \$o->{display},
	    askdisplay     => sub { print "Please enter the X11 display to perform the install on ? "; $o->{display} = chomp_(scalar(<STDIN>)) },
	    'newt|text'    => sub { $o->{interactive} = "curses" },
	    stdio          => sub { $o->{interactive} = "stdio" },
	    simple_themes  => \$o->{simple_themes},
	    'theme=s'      => \$o->{theme},
	    doc            => \$o->{doc},        #- will be used to know that we're running for the doc team,
	                                         #- e.g. we want screenshots with a good B&W contrast

	    'security=s'   => \$o->{security},

	    # auto install options:
	    noauto         => \$::noauto,
	    testing        => \$::testing,
	    patch          => \$patch,
	    'defcfg=s'     => \$cfg,
	    'auto_install|kickstart=s' => \$::auto_install,

	    local_install  => \$::local_install,
	    uml_install    => sub { $::uml_install = $::local_install = 1 },

	    # debugging options:
	    useless_thing_accepted => \$o->{useless_thing_accepted},
	    alawindows => sub { $o->{security} = 0; $o->{partitioning}{clearall} = 1; $o->{bootloader}{crushMbr} = 1 },
	    fdisk          => \$o->{partitioning}{fdisk},
	    'nomouseprobe=s' => \$o->{nomouseprobe},
	    updatemodules  => \$o->{updatemodules},

	    'suppl=s'      => \$o->{supplmedia},
	    askmedia       => \$o->{askmedia},
	    restore        => \$::isRestore,
	    'compsslistlevel=s' => \$o->{compssListLevel},

	    # to ignore:
	    'BOOT_IMAGE=s' => sub {},
	    'quiet|resume|root|splash' => sub {},
	);

    ($cfg, $patch);
}

sub init_env_share() {
    if ($::testing) {
	$ENV{SHARE_PATH} ||= "/export/install/stage2/live/usr/share";
	$ENV{SHARE_PATH} = "/usr/share" if !-e $ENV{SHARE_PATH};
    } else {
	$ENV{SHARE_PATH} ||= "/usr/share";
    }
}

sub init_path() {
    #-  make sure we do not pick up any gunk from the outside world
    my $remote_path = "$::prefix/sbin:$::prefix/bin:$::prefix/usr/sbin:$::prefix/usr/bin";
    $ENV{PATH} = "/usr/bin:/bin:/sbin:/usr/sbin:$remote_path";
}

sub init_mouse() {
    eval { $o->{mouse} = mouse::detect($o->{modules_conf}) } if !$o->{mouse} && !$o->{nomouseprobe};
    mouse::load_modules($o->{mouse});
}

sub init_modules_conf() {
    list_modules::load_default_moddeps();
    require modules::any_conf;
    require modules::modules_conf;
    # read back config from stage1:
    $o->{modules_conf} = modules::modules_conf::read(modules::any_conf::vnew(), '/tmp/modules.conf');
    modules::read_already_loaded($o->{modules_conf});
}

sub process_auto_steps() {
    foreach (@::auto_steps) {
	if (my $s = $o->{steps}{/::(.*)/ ? $1 : $_}) {
	    $s->{auto} = $s->{hidden} = 1;
	} else {
	    log::l("ERROR: unknown step $_ in auto_steps");
	}
    }
}

=item process_patch($cfg, $patch)

Handle installer live patches:

=over 4

=item * OEM patch (C<install/patch-oem.pl>)

=item * defcfg (the file indicated by the defcfg option)

=item * patch (C<patch> file)

=back

=cut

sub process_patch {
    my ($cfg, $patch) = @_;
    #- oem patch should be read before to still allow patch or defcfg.
    eval { $o = $::o = install::any::loadO($o, "install/patch-oem.pl"); log::l("successfully read oem patch") };
    #- patch should be read after defcfg in order to take precedence.
    eval { $o = $::o = install::any::loadO($o, $cfg); log::l("successfully read default configuration: $cfg") } if $cfg;
    eval { $o = $::o = install::any::loadO($o, "patch"); log::l("successfully read patch") } if $patch;
}

#-######################################################################################

=item main()

This is the main function, the installer entry point called by runinstall2:

=over 4

=item * initialization

=item * steps

=back

=cut
#-######################################################################################
sub main {
    $SIG{SEGV} = \&sig_segv_handler;
    $ENV{PERL_BADLANG} = 1;
    delete $ENV{TERMINFO};
    umask 022;

    $::isWizard = 1;
    $::no_ugtk_init = 1;

    push @::textdomains, 'DrakX', 'drakx-net', 'drakx-kbd-mouse-x11';

    my ($cfg, $patch) = parse_args(@_);

    init_env_share();

    undef $::auto_install if $cfg;

    $o->{stage2_phys_medium} = install::media::stage2_phys_medium($o->{method});

    log::l("second stage install running (", install::any::drakx_version($o), ")");

    eval { touch('/root/non-chrooted-marker.DrakX') }; #- helps distinguishing /root and /mnt/root when we don't know if we are chrooted

    if ($::local_install) {
        init_local_install($o);
    } else {
        start_udev();
        # load some modules early but asynchronously:
        run_program::raw({ detach => 1 }, 'modprobe', 'microcode');
    }

    $o->{prefix} = $::prefix = $::testing ? "/tmp/test-perl-install" : "/mnt";
    mkdir $::prefix, 0755 if ! -d $::prefix;

    init_path();

    eval { install::any::spawnShell() };

    init_modules_conf();

    #- done before auto_install is called to allow the -IP feature on auto_install file name
    read_stage1_net_conf() if -e '/tmp/network';

    #- done after module dependencies are loaded for "vfat depends on fat"
    if ($::auto_install) {
        init_auto_install();
    } else {
        $o->{interactive} ||= 'gtk';
    }
 
    if ($o->{interactive} eq "gtk" && availableMemory() < 22 * 1024) {
 	log::l("switching to curses install cuz not enough memory");
 	$o->{interactive} = "curses";
    }

    pre_init_brltty();

    # perl_checker: require install::steps_gtk
    # perl_checker: require install::steps_curses
    # perl_checker: require install::steps_stdio
    require "install/steps_$o->{interactive}.pm" if $o->{interactive};

    # psmouse is now modular:
    eval { modules::load("psmouse") };

    #- FIXME loading evdev should prevent crash of following line
    eval { modules::load("evdev") };

    #- needed before accessing floppy (in case of usb floppy)
    modules::load_category($o->{modules_conf}, 'bus/usb'); 

    process_patch($cfg, $patch);

    eval { modules::load("af_packet") };

    require harddrake::sound;
    harddrake::sound::configure_sound_slots($o->{modules_conf});

    #- need to be after oo-izing $o
    init_brltty() if $o->{brltty};

    #- needed very early for install::steps_gtk
    init_mouse() if !$::testing;

    #- for auto_install compatibility with old $o->{lang},
    #- and also for --lang and --flang
    if ($o->{lang}) {
	put_in_hash($o->{locale}, lang::lang_to_ourlocale($o->{lang}));
    }
    lang::set($o->{locale});

    # keep the result otherwise monitor-edid does not return good results afterwards
    eval { any::monitor_full_edid() };

    $o->{allowFB} = listlength(cat_("/proc/fb"));

    read_product_id() if !$::testing;

    log::l("META_CLASS=$o->{meta_class}");

    process_auto_steps();

    $ENV{COLUMNS} ||= 80;
    $ENV{LINES}   ||= 25;
    $::o = $o = step_init($o);

    eval { output('/proc/splash', "verbose\n") };
  
    real_main();
    finish_install();
}

=item real_main() {

Go through the steps cycle

=cut

sub real_main() {
    MAIN: for ($o->{step} = $o->{steps}{first};; $o->{step} = getNextStep($o)) {
	$o->{steps}{$o->{step}}{entered}++;
	$o->enteringStep($o->{step});
	my $time = time();
	eval {
	    &{$install::install2::{$o->{step}}}($o->{steps}{$o->{step}}{auto});
	};
	my $err = $@;
	log::l("step \"$o->{step}\" took: ", formatTimeRaw(time() - $time));
	$o->kill_action;
	if ($err) {
	    log::l("step \"$o->{step}\" failed with error: $err");
	    local $_ = $err;
	    $o->kill_action;
	    if (!/^already displayed/) {
		eval { $o->errorInStep($_) };
		$o->{steps}{$o->{step}}{auto} = 0;
		$err = $@;
		$err and next;
	    }
	    $o->{step} = $o->{steps}{$o->{step}}{onError};
	    next MAIN unless $o->{steps}{$o->{step}}{reachable}; #- sanity check: avoid a step not reachable on error.
	    redo MAIN;
	}
	$o->{steps}{$o->{step}}{done} = 1;
	$o->leavingStep($o->{step});

	last if $o->{step} eq 'exitInstall';
    }
}

=item finish_install() {

Clean up the installer before the final reboot.

=cut

sub finish_install() {
    unlink $install::any::compressed_image_on_disk;
    install::media::clean_postinstall_rpms();
    install::media::log_sizes();
    install::any::remove_advertising();
    install::any::write_fstab($o);
    $o->{modules_conf}->write;
    detect_devices::install_addons($::prefix);

    install::any::adjust_files_mtime_to_timezone();

    #- make sure failed upgrade will not hurt too much.
    install::steps::cleanIfFailedUpgrade($o);

    #- drop urpmi DB if urpmi is not installed:
    -e "$::prefix/usr/sbin/urpmi" or eval { rm_rf("$::prefix/var/lib/urpmi") };

    system("chroot", $::prefix, "bash", "-c", $o->{postInstallBeforeReboot}) if $o->{postInstallBeforeReboot};

    #- copy latest log files
    eval { cp_af("/tmp/$_", "$::prefix/root/drakx") foreach qw(ddebug.log stage1.log) };

    #- ala pixel? :-) [fpons]
    common::sync(); common::sync();

    stop_udev() if !$::local_install;
    log::l("installation complete, leaving");
    log::l("files still open by install2: ", readlink($_)) foreach glob_("/proc/self/fd/*");
    print "\n" x 80 if !$::local_install;
}

=back

=cut

1;
generated by cgit v1.2.1 (git 2.21.0) at 2024-10-14 22:14:30 +0000