summaryrefslogtreecommitdiffstats
path: root/perl-install/install/NEWS
Commit message (Collapse)AuthorAgeFilesLines
* 18.418.4Martin Whitaker2018-11-041-0/+3
|
* Adapt drakdm and set_autologin for display-manager service, not prefdm ↵Martin Whitaker2018-11-041-0/+1
| | | | (mga#22593)
* drakx-in-chroot: allow monitor-edid to be suppressed in package scriptlets.Martin Whitaker2018-10-291-0/+3
| | | | | | mageia-theme runs monitor-edid in its post-install scriptlet, but this can hang indefinitely when run in a nested X session. So add a LOCAL_INSTALL environment variable to flag this case.
* release installer tooThierry Vignaud2018-10-151-0/+2
|
* add bug IDThierry Vignaud2018-09-281-1/+1
|
* installer: include Encode::Unicode moduleMartin Whitaker2018-09-231-0/+1
| | | | needed by bootloader::write_refind()
* drakboot: add support for the rEFInd boot manager (mga#15153)Martin Whitaker2018-09-231-0/+2
|
* 18.118.1Thierry Vignaud2018-09-141-0/+2
|
* fix regression where drakx report pkgs failing to installThierry Vignaud2018-09-141-0/+2
| | | | | | | | | | | rationale: since the following commit: https://github.com/rpm-software-management/rpm/commit/5064276cd946183d711430da44b18608af74ebf1 rpmlib opens/closes the pkgs first in order to check them (introduced in rpm-4.14.2, mga#23531) So we must track whether we're verifying or installing the pkgs before checking whether they've been installed successfuly or not
* Revert "Only modify %__dbi_cdb if it is defined"Thierry Vignaud2018-09-141-1/+0
| | | | This reverts commit 0343f1bfc6d9fd76ba6bf911def836a47026a97a.
* Only modify %__dbi_cdb if it is definedPascal Terjan2018-09-141-0/+1
| | | | | This should avoid a misleading 'Too many levels of recursion in macro expansion' message as seen in mga#23531
* do not run monitor-edid with drakx-in-chrootThierry Vignaud2018-09-131-0/+3
| | | | rationale: it can timeouting
* raid fixes affects installer tooThomas Backlund2018-08-261-0/+4
|
* 18.018.0Thierry Vignaud2018-08-251-0/+2
|
* include mode modules for Encode (mga#23481)Thierry Vignaud2018-08-251-0/+1
|
* installer: remove current media before adding online media (mga#19742)Thierry Vignaud2018-08-111-0/+1
| | | | | | | | | | | | | thus preventing a failure when installing updates (due to udisks-daemon not running) if a package was available in the install media. Note that this will also cause the live system local repo to be removed when finish-install is run after installing the live system to disk. This is harmless - anything in the local repo should also be available in the online media - and indeed, leads to a cleaner system. (committed by Martin Whitaker <mageia@martin-whitaker.me.uk>)
* bootloader: include the 'Mageia' entry in the grub2 Default choices (mga#23393)Martin Whitaker2018-08-111-0/+2
| | | | | A parsing bug in bootloader::read_grub2() stopped the main menuentry being added to $bootloader{entries}.
* 17.9917.99Thierry Vignaud2018-08-091-0/+2
|
* adapt to perl 5.28Thierry Vignaud2018-08-091-0/+1
| | | | | - perl modules are now in /usr/LIB/perl5 (bin) or /usr/share/perl5 (noarch) - ARCH-linux-thread-multi & version is no more used in path
* enhance previous log messageThierry Vignaud2018-08-091-1/+1
|
* adapt to 1.12 RC1Thierry Vignaud2018-08-011-0/+1
|
* add missing hyphen-minusThierry Vignaud2018-08-011-1/+1
|
* add missing smartpqi driver (mga#23305)Thomas Backlund2018-07-251-0/+2
|
* 17.9817.98Thierry Vignaud2018-06-221-0/+2
|
* sync with kernel 4.1[5-7]Thierry Vignaud2018-06-221-0/+2
|
* 17.9717.9712.75e36beb8669302615274ffbb013ac2c92605cafa6Thierry Vignaud2018-06-051-0/+2
|
* libinput-list-devices is no moreThierry Vignaud2018-06-051-0/+2
|
* 17.9617.96Martin Whitaker2018-03-131-0/+6
|
* fix logsThierry Vignaud2018-02-101-1/+1
|
* 17.9517.95Thierry Vignaud2018-02-101-0/+2
|
* further sync with kernel 4.14Thierry Vignaud2018-02-101-0/+1
|
* include sensors in udev's HWDBThierry Vignaud2018-02-101-0/+1
| | | | like for rules, we don't include useless joystick hwdb
* include rpm & urpmi toolsThierry Vignaud2018-02-101-0/+3
|
* 17.9417.94Thierry Vignaud2018-02-091-0/+2
|
* add input rules from new systemd (mga#21886)Thierry Vignaud2018-02-091-0/+1
| | | | new systemd broke badly input devices under X.org in Drakx...
* include libinput tooThierry Vignaud2018-02-091-0/+1
| | | | helps mga#21886
* include chroot tooThierry Vignaud2018-02-091-0/+3
| | | | adjust NEWS due to previous git rebase/am conflicts having lost NEWS changes
* Catch sys_kernel_debug failure for local installPascal Terjan2018-01-201-0/+2
| | | | | | | | Some systems (for example some virtual machines) don't have any USB devices and the mounting fails as usbcore is not loaded. This is the case for every other call of it and just means USB devices don't get detected.
* 17.9317.93Thomas Backlund2018-01-191-1/+3
|
* sync with kernel 4.14Thomas Backlund2018-01-191-0/+1
|
* include more input HWDB entriesThierry Vignaud2018-01-101-0/+1
|
* installer: force update of /dev/disk/by-uuid after partitioning (mga#22059)Martin Whitaker2018-01-091-0/+2
| | | | | | | | Because stage2 does not include the udev 60-blocks.rule, udev does not automatically update the soft links in /dev/disk/by-uuid after we write the partition table and format the partitions. We need these links to be updated before we create the initrd. It would be cleaner to fix this with a udev rule, but for now, use brute force.
* Make fs::get_major_minor() unconditionally read the device numbers.Martin Whitaker2018-01-091-0/+4
| | | | | Thus ensuring we get the correct device numbers after writing a partition table (mga#22032).
* 17.9217.92Thomas Backlund2018-01-041-0/+2
|
* Really exit on errorPascal Terjan2018-01-041-0/+1
| | | | Incorrect code noticed in a comment on mga#22266
* Fix perl escaping causing commands to not get linkedPascal Terjan2018-01-041-0/+2
| | | | | Noticed in the build log: Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/sub (\w+?)_?(\(\))? { <-- HERE .*/ at -e line 1.
* 17.9117.91Thierry Vignaud2017-10-041-0/+2
|
* do not include some hwdb files from uneeded pkgsThierry Vignaud2017-10-041-0/+1
|
* do not include libnss3 modules anymoreThierry Vignaud2017-10-041-0/+2
| | | | rationale: rpm-4.14 now uses OpenSSL
* 17.9017.90Thierry Vignaud2017-09-181-0/+2
|
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-28 20:43:30 +0000