summaryrefslogtreecommitdiffstats
path: root/perl-install/NEWS
Commit message (Collapse)AuthorAgeFilesLines
* bootloader: add cma=256M@512M for Raspberry Pi DRM/VC4topic/extlinuxOlivier Blin2018-05-161-1/+1
|
* bootloader: add specific boot options for Raspberry Pi I/O scheduler (deadline)Olivier Blin2018-05-161-1/+1
| | | | | | | | | elevator=deadline is supposed to give better performance on flash storage, and used by default on most Raspberry Pi distributions. Ideally, this should not be set here for specific boards, but automatically for all architectures depending on the storage type. Archlinux appears to use a /etc/tmpfiles.d/set_IO_scheduler.conf file for this.
* bootloader: add specific boot cmdline options for Raspberry Pi serial consoleOlivier Blin2018-05-161-0/+1
| | | | | | | | | | console=ttyS0,115200 will work on Raspberry Pi 3. Raspberry Pi 2 does not boot without console=tty1 on cmdline. To have console output on both serial port and HDMI display, 8250.nr_uarts=1 is needed. On Raspberry Pi 2, though, it is required to edit /boot/extlinux/extlinux.conf to use ttyAMA0 instead of ttyS0 in the console parameter.
* bootloader: read/write extlinux.conf in U-Boot backend for ARMOlivier Blin2018-05-161-0/+1
| | | | | | | | | | | | | Read and write an extlinux.conf file in /boot/extlinux, it will be automatically found by U-boot if located on an active partition. Keep the "uboot" backend name, since we may do some U-Boot installation steps later on. Also, the extlinux.conf code could be used to support other bootloaders from the syslinux family. fixup extlinux
* bootloader: create /usr/lib/linux symlink for devicee tree filesOlivier Blin2018-05-131-0/+1
| | | | Also save it as fdtdir
* bootloader: build initrd for ARM archOlivier Blin2018-05-131-0/+2
| | | | It is needed for root devices with LABEL or UUID.
* don't list HDA "input" devices as keyboardsThierry Vignaud2018-04-171-0/+3
| | | | Those are listed in /proc/bus/input/devices (mga#9986)
* 17.9617.96Martin Whitaker2018-03-131-0/+6
|
* fix logsThierry Vignaud2018-02-101-1/+1
|
* 17.9517.95Thierry Vignaud2018-02-101-0/+2
|
* further sync with kernel 4.14Thierry Vignaud2018-02-101-0/+2
|
* 17.9317.93Thomas Backlund2018-01-191-0/+2
|
* sync with kernel 4.14Thomas Backlund2018-01-191-0/+1
|
* Make fs::get_major_minor() unconditionally read the device numbers.Martin Whitaker2018-01-091-0/+3
| | | | | Thus ensuring we get the correct device numbers after writing a partition table (mga#22032).
* Fix parsing of grub2 menu entries to support 16-bit mode (mga#21247).Martin Whitaker2018-01-091-0/+1
| | | | | This enables bootloader::read_grub2 to recognise the initrd16 keyword, which is used by default on x86 machines.
* Fix drakboot video mode selection when using grub2 (mga#21246)Martin Whitaker2018-01-091-0/+1
| | | | | | | | | | | | | The video mode needs to be extracted from and written back to the GRUB_CMDLINE_LINUX_DEFAULT parameter in /etc/defaults/grub2. This fix creates a new "default_vga" key in the $bootloader hash to hold the current selection. Using the existing "vga" key would cause the default video mode to be added to any bootloader entries that don't have a specific "vga" value, e.g. the "failsafe" entry. The $bootloader "vga" value doesn't appear to be set anywhere else, so may in fact be obsolete.
* Combine bootloader perImageAppend and default_append keys.Martin Whitaker2018-01-091-0/+3
| | | | | This allows changes to the append options to propagate to the grub2 configuration file, thus fixing mga#21263 and mga#21250.
* update list of modules needing firmwareThomas Backlund2018-01-091-0/+1
|
* iwlwifi-agn-ucode is renamed to iwlwifi-firmware (mga#22316)Thomas Backlund2018-01-091-0/+2
|
* 17.9017.90Thierry Vignaud2017-09-181-0/+2
|
* read_grub2: fix undefined labels (mga#19014)Thierry Vignaud2017-09-181-0/+2
| | | | | | | | | | | we were wrongly assuming we entered a new entry when reading eg: "${xen_rm_opts}" (which is why most people never see that error and why I wasn't able to reproduce it, one would need Xen or similar to be installed) Then drakboot would crash with: drakboot crashed ("undefined value for mandatory argument 'text' encountered at ugtk3.pm" Theorically, it could happen with DrakX too when updating a system with Xen.
* (read_grub2) handle both linux & linux16Thierry Vignaud2017-09-181-0/+3
| | | | thus we got more data
* 17.8817.88Thomas Backlund2017-07-071-0/+4
|
* 17.8517.85Thierry Vignaud2017-06-221-0/+2
|
* Don't overwrite custom grub2 settings when updating/upgrading (mga#20596)Martin Whitaker2017-06-221-0/+1
| | | | | Fixes a corner case bug where GRUB_DEFAULT and GRUB_SAVEDEFAULT would be overwritten if previously set to a value that evaluates as false.
* list 8812au (mga#21043)Thierry Vignaud2017-06-101-0/+2
|
* 17.8417.84Rémi Verschelde2017-06-051-0/+4
|
* 17.8317.83Thierry Vignaud2017-06-041-0/+2
|
* log previous changesThierry Vignaud2017-06-041-0/+1
|
* fix crash introduced in 17.77 (mga#20956)Thierry Vignaud2017-05-301-0/+3
| | | | | | | | | | | | | | Depending on machine speed/slowness, signals will not be fired in the order expected and Repaint() will be called before global variable $cairo is set by draw(). This can be reproduced by making $timer to happens much faster than every 120ms so that it happens before the first call to draw() This workaround fix the bug introduced in commit 1a30f422b41250e338d2c1d209aec1b64204c8e0 But it would probably be saner to get rid of the $cairo global variable and to create a Cairo context in every Repaint() caller instead...
* 17.8217.82Martin Whitaker2017-05-061-0/+7
|
* 17.8017.80Rémi Verschelde2017-05-031-0/+2
|
* Updated DE selection and advertising artwork for Mageia 6 (mga#20647)Rémi Verschelde2017-05-031-0/+2
|
* 17.79: update translations17.79Thomas Backlund2017-04-261-0/+4
|
* 17.7717.77Rémi Verschelde2017-04-041-0/+2
|
* Document previous commits by Martin WhitakerRémi Verschelde2017-04-041-0/+12
|
* Improve the CPU usage of the clockFrédéric Buclin2017-03-261-0/+3
|
* 17.7517.75Thierry Vignaud2017-03-171-0/+2
|
* log previous changesThierry Vignaud2017-03-171-0/+11
|
* 17.7417.74Jani Välimaa2017-03-091-0/+2
|
* Recognize LXQt (Razor-qt is now LXQt)Jani Välimaa2017-03-091-0/+1
|
* Fix Enlightenment (e21) recognitionJani Välimaa2017-03-091-0/+2
|
* 17.7317.73Thierry Vignaud2017-03-081-0/+2
|
* sync with kernel-4.8Thierry Vignaud2017-02-251-0/+2
|
* 17.7217.72Thierry Vignaud2017-02-251-0/+2
|
* Update NEWSMartin Whitaker2017-02-251-0/+10
|
* move installer release notes where they belongThierry Vignaud2017-02-221-1/+0
|
* - Add 60-block.rules in the installer (mga#20074)Nicolas Lécureuil2017-02-221-0/+1
|
* sync nonfree firmware list with kernel-4.9Thierry Vignaud2017-01-301-0/+2
|
* Release 17.7117.71Pascal Terjan2017-01-181-0/+2
|
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-22 04:01:17 +0000